wl1251: remove wl1251_ops
authorKalle Valo <kalle.valo@nokia.com>
Fri, 7 Aug 2009 10:33:57 +0000 (13:33 +0300)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 14 Aug 2009 13:13:38 +0000 (09:13 -0400)
Now wl1271 is splitted to separate files, no need to use wl1251_ops anymore.
So remove struct wl1251_chip and wl1251_ops.c.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 files changed:
drivers/net/wireless/wl12xx/Makefile
drivers/net/wireless/wl12xx/wl1251.h
drivers/net/wireless/wl12xx/wl1251_acx.c
drivers/net/wireless/wl12xx/wl1251_acx.h
drivers/net/wireless/wl12xx/wl1251_boot.c
drivers/net/wireless/wl12xx/wl1251_boot.h
drivers/net/wireless/wl12xx/wl1251_cmd.c
drivers/net/wireless/wl12xx/wl1251_init.c
drivers/net/wireless/wl12xx/wl1251_init.h
drivers/net/wireless/wl12xx/wl1251_io.c
drivers/net/wireless/wl12xx/wl1251_main.c
drivers/net/wireless/wl12xx/wl1251_ops.h [deleted file]

index 207e85274bc34e48914ea6edbb0a09e14e9856bf..62e37ad01cc0e59fa9837b1d224e96b0cac842cc 100644 (file)
@@ -1,7 +1,7 @@
 wl1251-objs            = wl1251_main.o wl1251_event.o \
                          wl1251_tx.o wl1251_rx.o wl1251_ps.o wl1251_cmd.o \
                          wl1251_acx.o wl1251_boot.o wl1251_init.o \
-                         wl1251_ops.o wl1251_debugfs.o wl1251_io.o
+                         wl1251_debugfs.o wl1251_io.o
 
 obj-$(CONFIG_WL1251)   += wl1251.o
 obj-$(CONFIG_WL1251_SPI)       += wl1251_spi.o
index 13f0589beec9142090cb0a9c12d86d25a3724454..44c5001beedaef8457a84ceb0c14835d990d455c 100644 (file)
@@ -143,35 +143,6 @@ struct wl1251_partition_set {
 
 struct wl1251;
 
-/* FIXME: I'm not sure about this structure name */
-struct wl1251_chip {
-       u32 id;
-
-       const char *fw_filename;
-       const char *nvs_filename;
-
-       char fw_ver[21];
-
-       unsigned int power_on_sleep;
-       int intr_cmd_complete;
-       int intr_init_complete;
-
-       int (*op_upload_fw)(struct wl1251 *wl);
-       int (*op_upload_nvs)(struct wl1251 *wl);
-       int (*op_boot)(struct wl1251 *wl);
-       void (*op_set_ecpu_ctrl)(struct wl1251 *wl, u32 flag);
-       void (*op_target_enable_interrupts)(struct wl1251 *wl);
-       int (*op_hw_init)(struct wl1251 *wl);
-       int (*op_plt_init)(struct wl1251 *wl);
-       void (*op_tx_flush)(struct wl1251 *wl);
-       void (*op_fw_version)(struct wl1251 *wl);
-       int (*op_cmd_join)(struct wl1251 *wl, u8 bss_type, u8 dtim_interval,
-                           u16 beacon_interval, u8 wait);
-
-       struct wl1251_partition_set *p_table;
-       enum wl12xx_acx_int_reg *acx_reg_table;
-};
-
 struct wl1251_stats {
        struct acx_statistics *fw_stats;
        unsigned long fw_stats_update;
@@ -307,8 +278,6 @@ struct wl1251 {
        int virtual_mem_addr;
        int virtual_reg_addr;
 
-       struct wl1251_chip chip;
-
        int cmd_box_addr;
        int event_box_addr;
        struct boot_attr boot_attr;
@@ -401,6 +370,9 @@ struct wl1251 {
        u32 buffer_cmd;
        u8 buffer_busyword[WL1251_BUSY_WORD_LEN];
        struct wl1251_rx_descriptor *rx_descriptor;
+
+       u32 chip_id;
+       char fw_ver[21];
 };
 
 int wl1251_plt_start(struct wl1251 *wl);
@@ -420,16 +392,25 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
 
 #define WL1251_TX_QUEUE_MAX_LENGTH 20
 
-/* Different chips need different sleep times after power on.  WL1271 needs
- * 200ms, WL1251 needs only 10ms.  By default we use 200ms, but as soon as we
- * know the chip ID, we change the sleep value in the wl1251 chip structure,
- * so in subsequent power ons, we don't waste more time then needed.  */
-#define WL1251_DEFAULT_POWER_ON_SLEEP 200
-
 #define CHIP_ID_1251_PG10                 (0x7010101)
 #define CHIP_ID_1251_PG11                 (0x7020101)
 #define CHIP_ID_1251_PG12                 (0x7030101)
 #define CHIP_ID_1271_PG10                 (0x4030101)
 #define CHIP_ID_1271_PG20                 (0x4030111)
 
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+
+#define WL1251_PART_DOWN_MEM_START     0x0
+#define WL1251_PART_DOWN_MEM_SIZE      0x16800
+#define WL1251_PART_DOWN_REG_START     REGISTERS_BASE
+#define WL1251_PART_DOWN_REG_SIZE      REGISTERS_DOWN_SIZE
+
+#define WL1251_PART_WORK_MEM_START     0x28000
+#define WL1251_PART_WORK_MEM_SIZE      0x14000
+#define WL1251_PART_WORK_REG_START     REGISTERS_BASE
+#define WL1251_PART_WORK_REG_SIZE      REGISTERS_WORK_SIZE
+
 #endif
index 91fe16c8d5b70df0d83a740d3d7c335543834b5b..0a225c62c97cdde38ad7fb0dd4e4ccfe28594099 100644 (file)
@@ -837,3 +837,82 @@ int wl1251_acx_statistics(struct wl1251 *wl, struct acx_statistics *stats)
 
        return 0;
 }
+
+int wl1251_acx_rate_policies(struct wl1251 *wl)
+{
+       struct acx_rate_policy *acx;
+       int ret = 0;
+
+       wl1251_debug(DEBUG_ACX, "acx rate policies");
+
+       acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+       if (!acx) {
+               ret = -ENOMEM;
+               goto out;
+       }
+
+       /* configure one default (one-size-fits-all) rate class */
+       acx->rate_class_cnt = 1;
+       acx->rate_class[0].enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
+       acx->rate_class[0].short_retry_limit = ACX_RATE_RETRY_LIMIT;
+       acx->rate_class[0].long_retry_limit = ACX_RATE_RETRY_LIMIT;
+       acx->rate_class[0].aflags = 0;
+
+       ret = wl1251_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
+       if (ret < 0) {
+               wl1251_warning("Setting of rate policies failed: %d", ret);
+               goto out;
+       }
+
+out:
+       kfree(acx);
+       return ret;
+}
+
+int wl1251_acx_mem_cfg(struct wl1251 *wl)
+{
+       struct wl1251_acx_config_memory *mem_conf;
+       int ret, i;
+
+       wl1251_debug(DEBUG_ACX, "acx mem cfg");
+
+       mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL);
+       if (!mem_conf) {
+               ret = -ENOMEM;
+               goto out;
+       }
+
+       /* memory config */
+       mem_conf->mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+       mem_conf->mem_config.rx_mem_block_num = 35;
+       mem_conf->mem_config.tx_min_mem_block_num = 64;
+       mem_conf->mem_config.num_tx_queues = MAX_TX_QUEUES;
+       mem_conf->mem_config.host_if_options = HOSTIF_PKT_RING;
+       mem_conf->mem_config.num_ssid_profiles = 1;
+       mem_conf->mem_config.debug_buffer_size =
+               cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+       /* RX queue config */
+       mem_conf->rx_queue_config.dma_address = 0;
+       mem_conf->rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+       mem_conf->rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+       mem_conf->rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+       /* TX queue config */
+       for (i = 0; i < MAX_TX_QUEUES; i++) {
+               mem_conf->tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+               mem_conf->tx_queue_config[i].attributes = i;
+       }
+
+       ret = wl1251_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
+                                  sizeof(*mem_conf));
+       if (ret < 0) {
+               wl1251_warning("wl1251 mem config failed: %d", ret);
+               goto out;
+       }
+
+out:
+       kfree(mem_conf);
+       return ret;
+}
index 2e7b1933a8f93fe5f5cd7b24685be9e705ed3b0d..cafb91459504d38ffd0da441db22644dcd5d0a52 100644 (file)
@@ -1031,6 +1031,150 @@ struct acx_statistics {
        struct acx_rxpipe_statistics rxpipe;
 } __attribute__ ((packed));
 
+#define ACX_MAX_RATE_CLASSES       8
+#define ACX_RATE_MASK_UNSPECIFIED  0
+#define ACX_RATE_RETRY_LIMIT      10
+
+struct acx_rate_class {
+       u32 enabled_rates;
+       u8 short_retry_limit;
+       u8 long_retry_limit;
+       u8 aflags;
+       u8 reserved;
+};
+
+struct acx_rate_policy {
+       struct acx_header header;
+
+       u32 rate_class_cnt;
+       struct acx_rate_class rate_class[ACX_MAX_RATE_CLASSES];
+} __attribute__ ((packed));
+
+struct wl1251_acx_memory {
+       __le16 num_stations; /* number of STAs to be supported. */
+       u16 reserved_1;
+
+       /*
+        * Nmber of memory buffers for the RX mem pool.
+        * The actual number may be less if there are
+        * not enough blocks left for the minimum num
+        * of TX ones.
+        */
+       u8 rx_mem_block_num;
+       u8 reserved_2;
+       u8 num_tx_queues; /* From 1 to 16 */
+       u8 host_if_options; /* HOST_IF* */
+       u8 tx_min_mem_block_num;
+       u8 num_ssid_profiles;
+       __le16 debug_buffer_size;
+} __attribute__ ((packed));
+
+
+#define ACX_RX_DESC_MIN                1
+#define ACX_RX_DESC_MAX                127
+#define ACX_RX_DESC_DEF                32
+struct wl1251_acx_rx_queue_config {
+       u8 num_descs;
+       u8 pad;
+       u8 type;
+       u8 priority;
+       __le32 dma_address;
+} __attribute__ ((packed));
+
+#define ACX_TX_DESC_MIN                1
+#define ACX_TX_DESC_MAX                127
+#define ACX_TX_DESC_DEF                16
+struct wl1251_acx_tx_queue_config {
+    u8 num_descs;
+    u8 pad[2];
+    u8 attributes;
+} __attribute__ ((packed));
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+       struct acx_header header;
+
+       struct wl1251_acx_memory mem_config;
+       struct wl1251_acx_rx_queue_config rx_queue_config;
+       struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __attribute__ ((packed));
+
+struct wl1251_acx_mem_map {
+       struct acx_header header;
+
+       void *code_start;
+       void *code_end;
+
+       void *wep_defkey_start;
+       void *wep_defkey_end;
+
+       void *sta_table_start;
+       void *sta_table_end;
+
+       void *packet_template_start;
+       void *packet_template_end;
+
+       void *queue_memory_start;
+       void *queue_memory_end;
+
+       void *packet_memory_pool_start;
+       void *packet_memory_pool_end;
+
+       void *debug_buffer1_start;
+       void *debug_buffer1_end;
+
+       void *debug_buffer2_start;
+       void *debug_buffer2_end;
+
+       /* Number of blocks FW allocated for TX packets */
+       u32 num_tx_mem_blocks;
+
+       /* Number of blocks FW allocated for RX packets */
+       u32 num_rx_mem_blocks;
+} __attribute__ ((packed));
+
+/*************************************************************************
+
+    Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA      BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT      BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR         BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA       BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A                BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B                BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST   BIT(6)
+
+/* Trace meassge on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A                BIT(7)
+
+/* Trace meassge on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B                BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE   BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE  BIT(14)
+
+#define WL1251_ACX_INTR_ALL           0xFFFFFFFF
+
 enum {
        ACX_WAKE_UP_CONDITIONS      = 0x0002,
        ACX_MEM_CFG                 = 0x0003,
@@ -1142,5 +1286,7 @@ int wl1251_acx_cts_protect(struct wl1251 *wl,
                            enum acx_ctsprotect_type ctsprotect);
 int wl1251_acx_statistics(struct wl1251 *wl, struct acx_statistics *stats);
 int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime);
+int wl1251_acx_rate_policies(struct wl1251 *wl);
+int wl1251_acx_mem_cfg(struct wl1251 *wl);
 
 #endif /* __WL1251_ACX_H__ */
index 8b50d44d8243ca52edf85205bff3bd357e399391..88e9cb0947d55038871dab32b3220703398547bf 100644 (file)
@@ -28,6 +28,7 @@
 #include "wl1251_io.h"
 #include "wl1251_spi.h"
 #include "wl1251_event.h"
+#include "wl1251_acx.h"
 
 void wl1251_boot_target_enable_interrupts(struct wl1251 *wl)
 {
@@ -208,18 +209,30 @@ int wl1251_boot_init_seq(struct wl1251 *wl)
        return 0;
 }
 
+static void wl1251_boot_set_ecpu_ctrl(struct wl1251 *wl, u32 flag)
+{
+       u32 cpu_ctrl;
+
+       /* 10.5.0 run the firmware (I) */
+       cpu_ctrl = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+       /* 10.5.1 run the firmware (II) */
+       cpu_ctrl &= ~flag;
+       wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
 int wl1251_boot_run_firmware(struct wl1251 *wl)
 {
        int loop, ret;
        u32 chip_id, interrupt;
 
-       wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+       wl1251_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
        chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
 
        wl1251_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
-       if (chip_id != wl->chip.id) {
+       if (chip_id != wl->chip_id) {
                wl1251_error("chip id doesn't match after firmware boot");
                return -EIO;
        }
@@ -236,9 +249,9 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
                        return -EIO;
                }
                /* check that ACX_INTR_INIT_COMPLETE is enabled */
-               else if (interrupt & wl->chip.intr_init_complete) {
+               else if (interrupt & WL1251_ACX_INTR_INIT_COMPLETE) {
                        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
-                                          wl->chip.intr_init_complete);
+                                          WL1251_ACX_INTR_INIT_COMPLETE);
                        break;
                }
        }
@@ -256,16 +269,15 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
        wl->event_box_addr = wl1251_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
 
        /* set the working partition to its "running" mode offset */
-       wl1251_set_partition(wl,
-                            wl->chip.p_table[PART_WORK].mem.start,
-                            wl->chip.p_table[PART_WORK].mem.size,
-                            wl->chip.p_table[PART_WORK].reg.start,
-                            wl->chip.p_table[PART_WORK].reg.size);
+       wl1251_set_partition(wl, WL1251_PART_WORK_MEM_START,
+                            WL1251_PART_WORK_MEM_SIZE,
+                            WL1251_PART_WORK_REG_START,
+                            WL1251_PART_WORK_REG_SIZE);
 
        wl1251_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
                     wl->cmd_box_addr, wl->event_box_addr);
 
-       wl->chip.op_fw_version(wl);
+       wl1251_acx_fw_version(wl, wl->fw_ver, sizeof(wl->fw_ver));
 
        /*
         * in case of full asynchronous mode the firmware event must be
@@ -275,7 +287,14 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
        /* enable gpio interrupts */
        wl1251_enable_interrupts(wl);
 
-       wl->chip.op_target_enable_interrupts(wl);
+       /* Enable target's interrupts */
+       wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+               WL1251_ACX_INTR_RX1_DATA |
+               WL1251_ACX_INTR_TX_RESULT |
+               WL1251_ACX_INTR_EVENT_A |
+               WL1251_ACX_INTR_EVENT_B |
+               WL1251_ACX_INTR_INIT_COMPLETE;
+       wl1251_boot_target_enable_interrupts(wl);
 
        /* unmask all mbox events  */
        wl->event_mask = 0xffffffff;
@@ -291,3 +310,218 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
        /* firmware startup completed */
        return 0;
 }
+
+static int wl1251_boot_upload_firmware(struct wl1251 *wl)
+{
+       int addr, chunk_num, partition_limit;
+       size_t fw_data_len;
+       u8 *p;
+
+       /* whal_FwCtrl_LoadFwImageSm() */
+
+       wl1251_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+                    wl1251_reg_read32(wl, CHIP_ID_B));
+
+       /* 10.0 check firmware length and set partition */
+       fw_data_len =  (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+               (wl->fw[6] << 8) | (wl->fw[7]);
+
+       wl1251_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
+               CHUNK_SIZE);
+
+       if ((fw_data_len % 4) != 0) {
+               wl1251_error("firmware length not multiple of four");
+               return -EIO;
+       }
+
+       wl1251_set_partition(wl, WL1251_PART_DOWN_MEM_START,
+                            WL1251_PART_DOWN_MEM_SIZE,
+                            WL1251_PART_DOWN_REG_START,
+                            WL1251_PART_DOWN_REG_SIZE);
+
+       /* 10.1 set partition limit and chunk num */
+       chunk_num = 0;
+       partition_limit = WL1251_PART_DOWN_MEM_SIZE;
+
+       while (chunk_num < fw_data_len / CHUNK_SIZE) {
+               /* 10.2 update partition, if needed */
+               addr = WL1251_PART_DOWN_MEM_START +
+                       (chunk_num + 2) * CHUNK_SIZE;
+               if (addr > partition_limit) {
+                       addr = WL1251_PART_DOWN_MEM_START +
+                               chunk_num * CHUNK_SIZE;
+                       partition_limit = chunk_num * CHUNK_SIZE +
+                               WL1251_PART_DOWN_MEM_SIZE;
+                       wl1251_set_partition(wl,
+                                            addr,
+                                            WL1251_PART_DOWN_MEM_SIZE,
+                                            WL1251_PART_DOWN_REG_START,
+                                            WL1251_PART_DOWN_REG_SIZE);
+               }
+
+               /* 10.3 upload the chunk */
+               addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
+               p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+               wl1251_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+                            p, addr);
+               wl1251_mem_write(wl, addr, p, CHUNK_SIZE);
+
+               chunk_num++;
+       }
+
+       /* 10.4 upload the last chunk */
+       addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
+       p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+       wl1251_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
+                    fw_data_len % CHUNK_SIZE, p, addr);
+       wl1251_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+       return 0;
+}
+
+static int wl1251_boot_upload_nvs(struct wl1251 *wl)
+{
+       size_t nvs_len, nvs_bytes_written, burst_len;
+       int nvs_start, i;
+       u32 dest_addr, val;
+       u8 *nvs_ptr, *nvs;
+
+       nvs = wl->nvs;
+       if (nvs == NULL)
+               return -ENODEV;
+
+       nvs_ptr = nvs;
+
+       nvs_len = wl->nvs_len;
+       nvs_start = wl->fw_len;
+
+       /*
+        * Layout before the actual NVS tables:
+        * 1 byte : burst length.
+        * 2 bytes: destination address.
+        * n bytes: data to burst copy.
+        *
+        * This is ended by a 0 length, then the NVS tables.
+        */
+
+       while (nvs_ptr[0]) {
+               burst_len = nvs_ptr[0];
+               dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+               /* We move our pointer to the data */
+               nvs_ptr += 3;
+
+               for (i = 0; i < burst_len; i++) {
+                       val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+                              | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+                       wl1251_debug(DEBUG_BOOT,
+                                    "nvs burst write 0x%x: 0x%x",
+                                    dest_addr, val);
+                       wl1251_mem_write32(wl, dest_addr, val);
+
+                       nvs_ptr += 4;
+                       dest_addr += 4;
+               }
+       }
+
+       /*
+        * We've reached the first zero length, the first NVS table
+        * is 7 bytes further.
+        */
+       nvs_ptr += 7;
+       nvs_len -= nvs_ptr - nvs;
+       nvs_len = ALIGN(nvs_len, 4);
+
+       /* Now we must set the partition correctly */
+       wl1251_set_partition(wl, nvs_start,
+                            WL1251_PART_DOWN_MEM_SIZE,
+                            WL1251_PART_DOWN_REG_START,
+                            WL1251_PART_DOWN_REG_SIZE);
+
+       /* And finally we upload the NVS tables */
+       nvs_bytes_written = 0;
+       while (nvs_bytes_written < nvs_len) {
+               val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+                      | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+               val = cpu_to_le32(val);
+
+               wl1251_debug(DEBUG_BOOT,
+                            "nvs write table 0x%x: 0x%x",
+                            nvs_start, val);
+               wl1251_mem_write32(wl, nvs_start, val);
+
+               nvs_ptr += 4;
+               nvs_bytes_written += 4;
+               nvs_start += 4;
+       }
+
+       return 0;
+}
+
+int wl1251_boot(struct wl1251 *wl)
+{
+       int ret = 0, minor_minor_e2_ver;
+       u32 tmp, boot_data;
+
+       ret = wl1251_boot_soft_reset(wl);
+       if (ret < 0)
+               goto out;
+
+       /* 2. start processing NVS file */
+       ret = wl1251_boot_upload_nvs(wl);
+       if (ret < 0)
+               goto out;
+
+       /* write firmware's last address (ie. it's length) to
+        * ACX_EEPROMLESS_IND_REG */
+       wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+
+       /* 6. read the EEPROM parameters */
+       tmp = wl1251_reg_read32(wl, SCR_PAD2);
+
+       /* 7. read bootdata */
+       wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+       wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+       tmp = wl1251_reg_read32(wl, SCR_PAD3);
+
+       /* 8. check bootdata and call restart sequence */
+       wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+       minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+       wl1251_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+                    "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+                    wl->boot_attr.radio_type, wl->boot_attr.major,
+                    wl->boot_attr.minor, minor_minor_e2_ver);
+
+       ret = wl1251_boot_init_seq(wl);
+       if (ret < 0)
+               goto out;
+
+       /* 9. NVS processing done */
+       boot_data = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+       wl1251_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+       /* 10. check that ECPU_CONTROL_HALT bits are set in
+        * pWhalBus->uBootData and start uploading firmware
+        */
+       if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+               wl1251_error("boot failed, ECPU_CONTROL_HALT not set");
+               ret = -EIO;
+               goto out;
+       }
+
+       ret = wl1251_boot_upload_firmware(wl);
+       if (ret < 0)
+               goto out;
+
+       /* 10.5 start firmware */
+       ret = wl1251_boot_run_firmware(wl);
+       if (ret < 0)
+               goto out;
+
+out:
+       return ret;
+}
index 798362d71e3fb06e35dbe542b124abf6520b154f..90063697e8f279f9590af39aff1e735ce408ffc7 100644 (file)
@@ -30,6 +30,7 @@ int wl1251_boot_soft_reset(struct wl1251 *wl);
 int wl1251_boot_init_seq(struct wl1251 *wl);
 int wl1251_boot_run_firmware(struct wl1251 *wl);
 void wl1251_boot_target_enable_interrupts(struct wl1251 *wl);
+int wl1251_boot(struct wl1251 *wl);
 
 /* number of times we try to read the INIT interrupt */
 #define INIT_LOOP 20000
index dfbf6811976d2f4c5207eb39dde50a44d4109773..53f5da65bcb4829c8ec9607fb673bb0aedd761c7 100644 (file)
@@ -37,7 +37,7 @@ int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
        timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
 
        intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
-       while (!(intr & wl->chip.intr_cmd_complete)) {
+       while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
                if (time_after(jiffies, timeout)) {
                        wl1251_error("command complete timeout");
                        ret = -ETIMEDOUT;
@@ -50,7 +50,7 @@ int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
        }
 
        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
-                          wl->chip.intr_cmd_complete);
+                          WL1251_ACX_INTR_CMD_COMPLETE);
 
 out:
        return ret;
index df6c60f0fd660426abb85fd7b3c626472238c66a..1c587eceacc492b71c3a5afa34c33df236934562 100644 (file)
@@ -28,6 +28,7 @@
 #include "wl12xx_80211.h"
 #include "wl1251_acx.h"
 #include "wl1251_cmd.h"
+#include "reg.h"
 
 int wl1251_hw_init_hwenc_config(struct wl1251 *wl)
 {
@@ -198,3 +199,215 @@ int wl1251_hw_init_power_auth(struct wl1251 *wl)
 {
        return wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM);
 }
+
+int wl1251_hw_init_mem_config(struct wl1251 *wl)
+{
+       int ret;
+
+       ret = wl1251_acx_mem_cfg(wl);
+       if (ret < 0)
+               return ret;
+
+       wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+                                         GFP_KERNEL);
+       if (!wl->target_mem_map) {
+               wl1251_error("couldn't allocate target memory map");
+               return -ENOMEM;
+       }
+
+       /* we now ask for the firmware built memory map */
+       ret = wl1251_acx_mem_map(wl, wl->target_mem_map,
+                                sizeof(struct wl1251_acx_mem_map));
+       if (ret < 0) {
+               wl1251_error("couldn't retrieve firmware memory map");
+               kfree(wl->target_mem_map);
+               wl->target_mem_map = NULL;
+               return ret;
+       }
+
+       return 0;
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+                                  struct acx_tx_queue_qos_config *config,
+                                  u32 num_blocks)
+{
+       config->qid = qid;
+
+       switch (qid) {
+       case QOS_AC_BE:
+               config->high_threshold =
+                       (QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+               config->low_threshold =
+                       (QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+               break;
+       case QOS_AC_BK:
+               config->high_threshold =
+                       (QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+               config->low_threshold =
+                       (QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+               break;
+       case QOS_AC_VI:
+               config->high_threshold =
+                       (QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+               config->low_threshold =
+                       (QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+               break;
+       case QOS_AC_VO:
+               config->high_threshold =
+                       (QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+               config->low_threshold =
+                       (QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+               break;
+       default:
+               wl1251_error("Invalid TX queue id: %d", qid);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl)
+{
+       struct acx_tx_queue_qos_config *config;
+       struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+       int ret, i;
+
+       wl1251_debug(DEBUG_ACX, "acx tx queue config");
+
+       config = kzalloc(sizeof(*config), GFP_KERNEL);
+       if (!config) {
+               ret = -ENOMEM;
+               goto out;
+       }
+
+       for (i = 0; i < MAX_NUM_OF_AC; i++) {
+               ret = wl1251_hw_init_txq_fill(i, config,
+                                             wl_mem_map->num_tx_mem_blocks);
+               if (ret < 0)
+                       goto out;
+
+               ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG,
+                                          config, sizeof(*config));
+               if (ret < 0)
+                       goto out;
+       }
+
+out:
+       kfree(config);
+       return ret;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl1251 *wl)
+{
+       int ret;
+
+       /* asking for the data path parameters */
+       wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+                               GFP_KERNEL);
+       if (!wl->data_path) {
+               wl1251_error("Couldnt allocate data path parameters");
+               return -ENOMEM;
+       }
+
+       ret = wl1251_acx_data_path_params(wl, wl->data_path);
+       if (ret < 0) {
+               kfree(wl->data_path);
+               wl->data_path = NULL;
+               return ret;
+       }
+
+       return 0;
+}
+
+
+int wl1251_hw_init(struct wl1251 *wl)
+{
+       struct wl1251_acx_mem_map *wl_mem_map;
+       int ret;
+
+       ret = wl1251_hw_init_hwenc_config(wl);
+       if (ret < 0)
+               return ret;
+
+       /* Template settings */
+       ret = wl1251_hw_init_templates_config(wl);
+       if (ret < 0)
+               return ret;
+
+       /* Default memory configuration */
+       ret = wl1251_hw_init_mem_config(wl);
+       if (ret < 0)
+               return ret;
+
+       /* Default data path configuration  */
+       ret = wl1251_hw_init_data_path_config(wl);
+       if (ret < 0)
+               goto out_free_memmap;
+
+       /* RX config */
+       ret = wl1251_hw_init_rx_config(wl,
+                                      RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+                                      RX_FILTER_OPTION_DEF);
+       /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+          RX_FILTER_OPTION_FILTER_ALL); */
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* TX queues config */
+       ret = wl1251_hw_init_tx_queue_config(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* PHY layer config */
+       ret = wl1251_hw_init_phy_config(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* Beacon filtering */
+       ret = wl1251_hw_init_beacon_filter(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* Bluetooth WLAN coexistence */
+       ret = wl1251_hw_init_pta(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* Energy detection */
+       ret = wl1251_hw_init_energy_detection(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* Beacons and boradcast settings */
+       ret = wl1251_hw_init_beacon_broadcast(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* Enable data path */
+       ret = wl1251_cmd_data_path(wl, wl->channel, 1);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       /* Default power state */
+       ret = wl1251_hw_init_power_auth(wl);
+       if (ret < 0)
+               goto out_free_data_path;
+
+       wl_mem_map = wl->target_mem_map;
+       wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+                   wl_mem_map->num_tx_mem_blocks,
+                   wl->data_path->tx_control_addr,
+                   wl_mem_map->num_rx_mem_blocks,
+                   wl->data_path->rx_control_addr);
+
+       return 0;
+
+ out_free_data_path:
+       kfree(wl->data_path);
+
+ out_free_memmap:
+       kfree(wl->target_mem_map);
+
+       return ret;
+}
index 8596188e834ef602b3e5355c1f4d7fd4d038cd1c..b3b25ec885ea7489d19c3f6f3cd2d08d047e7217 100644 (file)
@@ -35,5 +35,7 @@ int wl1251_hw_init_pta(struct wl1251 *wl);
 int wl1251_hw_init_energy_detection(struct wl1251 *wl);
 int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl);
 int wl1251_hw_init_power_auth(struct wl1251 *wl);
+int wl1251_hw_init_mem_config(struct wl1251 *wl);
+int wl1251_hw_init(struct wl1251 *wl);
 
 #endif
index db2cfbfb1e40740e3e6fd81d9295a84ea861eb8f..04e486c275c2ca4896556a4c4b8097019dbffb2c 100644 (file)
 #include "reg.h"
 #include "wl1251_io.h"
 
+/* FIXME: this is static data nowadays and the table can be removed */
+static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = {
+       [ACX_REG_INTERRUPT_TRIG]     = (REGISTERS_BASE + 0x0474),
+       [ACX_REG_INTERRUPT_TRIG_H]   = (REGISTERS_BASE + 0x0478),
+       [ACX_REG_INTERRUPT_MASK]     = (REGISTERS_BASE + 0x0494),
+       [ACX_REG_HINT_MASK_SET]      = (REGISTERS_BASE + 0x0498),
+       [ACX_REG_HINT_MASK_CLR]      = (REGISTERS_BASE + 0x049C),
+       [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+       [ACX_REG_INTERRUPT_CLEAR]    = (REGISTERS_BASE + 0x04A4),
+       [ACX_REG_INTERRUPT_ACK]      = (REGISTERS_BASE + 0x04A8),
+       [ACX_REG_SLV_SOFT_RESET]     = (REGISTERS_BASE + 0x0000),
+       [ACX_REG_EE_START]           = (REGISTERS_BASE + 0x080C),
+       [ACX_REG_ECPU_CONTROL]       = (REGISTERS_BASE + 0x0804)
+};
+
 static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr)
 {
        /* If the address is lower than REGISTERS_BASE, it means that this is
@@ -36,7 +51,7 @@ static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr)
                        wl1251_error("address out of range (%d)", addr);
                        return -EINVAL;
                }
-               addr = wl->chip.acx_reg_table[addr];
+               addr = wl1251_io_reg_table[addr];
        }
 
        return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
index 4c1aad33fb5162a0be9bbe528328279fb6e818cf..8c88fe279ec6c86cbf89e81d0505a842a29911b8 100644 (file)
@@ -32,7 +32,6 @@
 #include "wl1251.h"
 #include "wl12xx_80211.h"
 #include "reg.h"
-#include "wl1251_ops.h"
 #include "wl1251_io.h"
 #include "wl1251_cmd.h"
 #include "wl1251_event.h"
@@ -41,6 +40,7 @@
 #include "wl1251_ps.h"
 #include "wl1251_init.h"
 #include "wl1251_debugfs.h"
+#include "wl1251_boot.h"
 
 void wl1251_enable_interrupts(struct wl1251 *wl)
 {
@@ -68,7 +68,7 @@ static int wl1251_fetch_firmware(struct wl1251 *wl)
        struct device *dev = wiphy_dev(wl->hw->wiphy);
        int ret;
 
-       ret = request_firmware(&fw, wl->chip.fw_filename, dev);
+       ret = request_firmware(&fw, WL1251_FW_NAME, dev);
 
        if (ret < 0) {
                wl1251_error("could not get firmware: %d", ret);
@@ -107,7 +107,7 @@ static int wl1251_fetch_nvs(struct wl1251 *wl)
        struct device *dev = wiphy_dev(wl->hw->wiphy);
        int ret;
 
-       ret = request_firmware(&fw, wl->chip.nvs_filename, dev);
+       ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
 
        if (ret < 0) {
                wl1251_error("could not get nvs file: %d", ret);
@@ -157,7 +157,7 @@ static int wl1251_chip_wakeup(struct wl1251 *wl)
        int ret = 0;
 
        wl1251_power_on(wl);
-       msleep(wl->chip.power_on_sleep);
+       msleep(WL1251_POWER_ON_SLEEP);
        wl->if_ops->reset(wl);
 
        /* We don't need a real memory partition here, because we only want
@@ -174,22 +174,19 @@ static int wl1251_chip_wakeup(struct wl1251 *wl)
        /* whal_FwCtrl_BootSm() */
 
        /* 0. read chip id from CHIP_ID */
-       wl->chip.id = wl1251_reg_read32(wl, CHIP_ID_B);
+       wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
 
        /* 1. check if chip id is valid */
 
-       switch (wl->chip.id) {
+       switch (wl->chip_id) {
        case CHIP_ID_1251_PG12:
                wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
-                            wl->chip.id);
-
-               wl1251_setup(wl);
-
+                            wl->chip_id);
                break;
        case CHIP_ID_1251_PG10:
        case CHIP_ID_1251_PG11:
        default:
-               wl1251_error("unsupported chip id: 0x%x", wl->chip.id);
+               wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
                ret = -ENODEV;
                goto out;
        }
@@ -211,6 +208,107 @@ out:
        return ret;
 }
 
+static void wl1251_irq_work(struct work_struct *work)
+{
+       u32 intr;
+       struct wl1251 *wl =
+               container_of(work, struct wl1251, irq_work);
+       int ret;
+
+       mutex_lock(&wl->mutex);
+
+       wl1251_debug(DEBUG_IRQ, "IRQ work");
+
+       if (wl->state == WL1251_STATE_OFF)
+               goto out;
+
+       ret = wl1251_ps_elp_wakeup(wl);
+       if (ret < 0)
+               goto out;
+
+       wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+       intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+       wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+       if (wl->data_path) {
+               wl->rx_counter =
+                       wl1251_mem_read32(wl, wl->data_path->rx_control_addr);
+
+               /* We handle a frmware bug here */
+               switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+               case 0:
+                       wl1251_debug(DEBUG_IRQ, "RX: FW and host in sync");
+                       intr &= ~WL1251_ACX_INTR_RX0_DATA;
+                       intr &= ~WL1251_ACX_INTR_RX1_DATA;
+                       break;
+               case 1:
+                       wl1251_debug(DEBUG_IRQ, "RX: FW +1");
+                       intr |= WL1251_ACX_INTR_RX0_DATA;
+                       intr &= ~WL1251_ACX_INTR_RX1_DATA;
+                       break;
+               case 2:
+                       wl1251_debug(DEBUG_IRQ, "RX: FW +2");
+                       intr |= WL1251_ACX_INTR_RX0_DATA;
+                       intr |= WL1251_ACX_INTR_RX1_DATA;
+                       break;
+               default:
+                       wl1251_warning("RX: FW and host out of sync: %d",
+                                      wl->rx_counter - wl->rx_handled);
+                       break;
+               }
+
+               wl->rx_handled = wl->rx_counter;
+
+
+               wl1251_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
+       }
+
+       intr &= wl->intr_mask;
+
+       if (intr == 0) {
+               wl1251_debug(DEBUG_IRQ, "INTR is 0");
+               wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+                                  ~(wl->intr_mask));
+
+               goto out_sleep;
+       }
+
+       if (intr & WL1251_ACX_INTR_RX0_DATA) {
+               wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+               wl1251_rx(wl);
+       }
+
+       if (intr & WL1251_ACX_INTR_RX1_DATA) {
+               wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+               wl1251_rx(wl);
+       }
+
+       if (intr & WL1251_ACX_INTR_TX_RESULT) {
+               wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+               wl1251_tx_complete(wl);
+       }
+
+       if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
+               wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
+               if (intr & WL1251_ACX_INTR_EVENT_A)
+                       wl1251_event_handle(wl, 0);
+               else
+                       wl1251_event_handle(wl, 1);
+       }
+
+       if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+               wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
+
+       wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+
+out_sleep:
+       wl1251_ps_elp_sleep(wl);
+
+out:
+       mutex_unlock(&wl->mutex);
+}
+
 static void wl1251_filter_work(struct work_struct *work)
 {
        struct wl1251 *wl =
@@ -227,7 +325,7 @@ static void wl1251_filter_work(struct work_struct *work)
                goto out;
 
        /* FIXME: replace the magic numbers with proper definitions */
-       ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
+       ret = wl1251_cmd_join(wl, wl->bss_type, 1, 100, 0);
        if (ret < 0)
                goto out_sleep;
 
@@ -289,11 +387,11 @@ static int wl1251_op_start(struct ieee80211_hw *hw)
        if (ret < 0)
                goto out;
 
-       ret = wl->chip.op_boot(wl);
+       ret = wl1251_boot(wl);
        if (ret < 0)
                goto out;
 
-       ret = wl->chip.op_hw_init(wl);
+       ret = wl1251_hw_init(wl);
        if (ret < 0)
                goto out;
 
@@ -303,7 +401,7 @@ static int wl1251_op_start(struct ieee80211_hw *hw)
 
        wl->state = WL1251_STATE_ON;
 
-       wl1251_info("firmware booted (%s)", wl->chip.fw_ver);
+       wl1251_info("firmware booted (%s)", wl->fw_ver);
 
 out:
        if (ret < 0)
@@ -346,7 +444,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
        mutex_lock(&wl->mutex);
 
        /* let's notify MAC80211 about the remaining pending TX frames */
-       wl->chip.op_tx_flush(wl);
+       wl1251_tx_flush(wl);
        wl1251_power_off(wl);
 
        memset(wl->bssid, 0, ETH_ALEN);
@@ -467,7 +565,7 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 
        if (channel != wl->channel) {
                /* FIXME: use beacon interval provided by mac80211 */
-               ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
+               ret = wl1251_cmd_join(wl, wl->bss_type, 1, 100, 0);
                if (ret < 0)
                        goto out_sleep;
 
@@ -1041,7 +1139,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
                if (ret < 0)
                        goto out;
 
-               ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
+               ret = wl1251_cmd_join(wl, wl->bss_type, 1, 100, 0);
 
                if (ret < 0)
                        goto out;
@@ -1232,15 +1330,14 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
        wl->tx_queue_stopped = false;
        wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
 
-       /* We use the default power on sleep time until we know which chip
-        * we're using */
-       wl->chip.power_on_sleep = WL1251_DEFAULT_POWER_ON_SLEEP;
-
        for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
                wl->tx_frames[i] = NULL;
 
        wl->next_tx_complete = 0;
 
+       INIT_WORK(&wl->irq_work, wl1251_irq_work);
+       INIT_WORK(&wl->tx_work, wl1251_tx_work);
+
        /*
         * In case our MAC address is not correctly set,
         * we use a random but Nokia MAC.
diff --git a/drivers/net/wireless/wl12xx/wl1251_ops.h b/drivers/net/wireless/wl12xx/wl1251_ops.h
deleted file mode 100644 (file)
index 68183c4..0000000
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * This file is part of wl1251
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL1251_OPS_H__
-#define __WL1251_OPS_H__
-
-#include <linux/bitops.h>
-
-#include "wl1251.h"
-#include "wl1251_acx.h"
-
-#define WL1251_FW_NAME "wl1251-fw.bin"
-#define WL1251_NVS_NAME "wl1251-nvs.bin"
-
-#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
-
-void wl1251_setup(struct wl1251 *wl);
-
-
-struct wl1251_acx_memory {
-       __le16 num_stations; /* number of STAs to be supported. */
-       u16 reserved_1;
-
-       /*
-        * Nmber of memory buffers for the RX mem pool.
-        * The actual number may be less if there are
-        * not enough blocks left for the minimum num
-        * of TX ones.
-        */
-       u8 rx_mem_block_num;
-       u8 reserved_2;
-       u8 num_tx_queues; /* From 1 to 16 */
-       u8 host_if_options; /* HOST_IF* */
-       u8 tx_min_mem_block_num;
-       u8 num_ssid_profiles;
-       __le16 debug_buffer_size;
-} __attribute__ ((packed));
-
-
-#define ACX_RX_DESC_MIN                1
-#define ACX_RX_DESC_MAX                127
-#define ACX_RX_DESC_DEF                32
-struct wl1251_acx_rx_queue_config {
-       u8 num_descs;
-       u8 pad;
-       u8 type;
-       u8 priority;
-       __le32 dma_address;
-} __attribute__ ((packed));
-
-#define ACX_TX_DESC_MIN                1
-#define ACX_TX_DESC_MAX                127
-#define ACX_TX_DESC_DEF                16
-struct wl1251_acx_tx_queue_config {
-    u8 num_descs;
-    u8 pad[2];
-    u8 attributes;
-} __attribute__ ((packed));
-
-#define MAX_TX_QUEUE_CONFIGS 5
-#define MAX_TX_QUEUES 4
-struct wl1251_acx_config_memory {
-       struct acx_header header;
-
-       struct wl1251_acx_memory mem_config;
-       struct wl1251_acx_rx_queue_config rx_queue_config;
-       struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
-} __attribute__ ((packed));
-
-struct wl1251_acx_mem_map {
-       struct acx_header header;
-
-       void *code_start;
-       void *code_end;
-
-       void *wep_defkey_start;
-       void *wep_defkey_end;
-
-       void *sta_table_start;
-       void *sta_table_end;
-
-       void *packet_template_start;
-       void *packet_template_end;
-
-       void *queue_memory_start;
-       void *queue_memory_end;
-
-       void *packet_memory_pool_start;
-       void *packet_memory_pool_end;
-
-       void *debug_buffer1_start;
-       void *debug_buffer1_end;
-
-       void *debug_buffer2_start;
-       void *debug_buffer2_end;
-
-       /* Number of blocks FW allocated for TX packets */
-       u32 num_tx_mem_blocks;
-
-       /* Number of blocks FW allocated for RX packets */
-       u32 num_rx_mem_blocks;
-} __attribute__ ((packed));
-
-/*************************************************************************
-
-    Host Interrupt Register (WiLink -> Host)
-
-**************************************************************************/
-
-/* RX packet is ready in Xfer buffer #0 */
-#define WL1251_ACX_INTR_RX0_DATA      BIT(0)
-
-/* TX result(s) are in the TX complete buffer */
-#define WL1251_ACX_INTR_TX_RESULT      BIT(1)
-
-/* OBSOLETE */
-#define WL1251_ACX_INTR_TX_XFR         BIT(2)
-
-/* RX packet is ready in Xfer buffer #1 */
-#define WL1251_ACX_INTR_RX1_DATA       BIT(3)
-
-/* Event was entered to Event MBOX #A */
-#define WL1251_ACX_INTR_EVENT_A                BIT(4)
-
-/* Event was entered to Event MBOX #B */
-#define WL1251_ACX_INTR_EVENT_B                BIT(5)
-
-/* OBSOLETE */
-#define WL1251_ACX_INTR_WAKE_ON_HOST   BIT(6)
-
-/* Trace meassge on MBOX #A */
-#define WL1251_ACX_INTR_TRACE_A                BIT(7)
-
-/* Trace meassge on MBOX #B */
-#define WL1251_ACX_INTR_TRACE_B                BIT(8)
-
-/* Command processing completion */
-#define WL1251_ACX_INTR_CMD_COMPLETE   BIT(9)
-
-/* Init sequence is done */
-#define WL1251_ACX_INTR_INIT_COMPLETE  BIT(14)
-
-#define WL1251_ACX_INTR_ALL           0xFFFFFFFF
-
-#endif