Memory Resource Controller(Memcg) Implementation Memo.
-Last Updated: 2008/12/15
-Base Kernel Version: based on 2.6.28-rc8-mm.
+Last Updated: 2009/1/19
+Base Kernel Version: based on 2.6.29-rc2.
Because VM is getting complex (one of reasons is memcg...), memcg's behavior
is complex. This is a document for memcg's internal behavior.
# mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
and do task move, mkdir, rmdir etc...under this.
+
+ 9.7 swapoff.
+ Besides management of swap is one of complicated parts of memcg,
+ call path of swap-in at swapoff is not same as usual swap-in path..
+ It's worth to be tested explicitly.
+
+ For example, test like following is good.
+ (Shell-A)
+ # mount -t cgroup none /cgroup -t memory
+ # mkdir /cgroup/test
+ # echo 40M > /cgroup/test/memory.limit_in_bytes
+ # echo 0 > /cgroup/test/tasks
+ Run malloc(100M) program under this. You'll see 60M of swaps.
+ (Shell-B)
+ # move all tasks in /cgroup/test to /cgroup
+ # /sbin/swapoff -a
+ # rmdir /test/cgroup
+ # kill malloc task.
+
+ Of course, tmpfs v.s. swapoff test should be tested, too.
Instruct the server to listen on the RDMA transport:
- $ echo rdma 2050 > /proc/fs/nfsd/portlist
+ $ echo rdma 20049 > /proc/fs/nfsd/portlist
- On the client system
Regardless of how the client was built (module or built-in), use this
command to mount the NFS/RDMA server:
- $ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt
+ $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
To verify that the mount is using RDMA, run "cat /proc/mounts" and check
the "proto" field for the given mount.
values are in the range -16 to +15, plus the special value -17, which disables
oom-killing altogether for this process.
+The process to be killed in an out-of-memory situation is selected among all others
+based on its badness score. This value equals the original memory size of the process
+and is then updated according to its CPU time (utime + stime) and the
+run time (uptime - start time). The longer it runs the smaller is the score.
+Badness score is divided by the square root of the CPU time and then by
+the double square root of the run time.
+
+Swapped out tasks are killed first. Half of each child's memory size is added to
+the parent's score if they do not share the same memory. Thus forking servers
+are the prime candidates to be killed. Having only one 'hungry' child will make
+parent less preferable than the child.
+
+/proc/<pid>/oom_score shows process' current badness score.
+
+The following heuristics are then applied:
+ * if the task was reniced, its score doubles
+ * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
+ or CAP_SYS_RAWIO) have their score divided by 4
+ * if oom condition happened in one cpuset and checked task does not belong
+ to it, its score is divided by 8
+ * the resulting score is multiplied by two to the power of oom_adj, i.e.
+ points <<= oom_adj when it is positive and
+ points >>= -(oom_adj) otherwise
+
+The task with the highest badness score is then selected and its children
+are killed, process itself will be killed in an OOM situation when it does
+not have children or some of them disabled oom like described above.
+
2.13 /proc/<pid>/oom_score - Display current oom-killer score
-------------------------------------------------------------
KCPPFLAGS
--------------------------------------------------
Additional options to pass when preprocessing. The preprocessing options
-will be used in all cases where kbuild do preprocessing including
+will be used in all cases where kbuild does preprocessing including
building C files and assembler files.
KAFLAGS
KBUILD_VERBOSE
--------------------------------------------------
-Set the kbuild verbosity. Can be assinged same values as "V=...".
+Set the kbuild verbosity. Can be assigned same values as "V=...".
See make help for the full list.
Setting "V=..." takes precedence over KBUILD_VERBOSE.
--------------------------------------------------
Specify the output directory when building the kernel.
The output directory can also be specificed using "O=...".
-Setting "O=..." takes precedence over KBUILD_OUTPUT
+Setting "O=..." takes precedence over KBUILD_OUTPUT.
ARCH
--------------------------------------------------
Set ARCH to the architecture to be built.
In most cases the name of the architecture is the same as the
directory name found in the arch/ directory.
-But some architectures suach as x86 and sparc has aliases.
+But some architectures such as x86 and sparc have aliases.
x86: i386 for 32 bit, x86_64 for 64 bit
sparc: sparc for 32 bit, sparc64 for 64 bit
INSTALL_PATH
--------------------------------------------------
INSTALL_PATH specifies where to place the updated kernel and system map
-images. Default is /boot, but you can set it to other values
+images. Default is /boot, but you can set it to other values.
MODLIB
INSTALL_FW_PATH
--------------------------------------------------
-INSTALL_FW_PATH specify where to install the firmware blobs.
+INSTALL_FW_PATH specifies where to install the firmware blobs.
The default value is:
$(INSTALL_MOD_PATH)/lib/firmware
INSTALL_HDR_PATH
--------------------------------------------------
-INSTALL_HDR_PATH specify where to install user space headers when
+INSTALL_HDR_PATH specifies where to install user space headers when
executing "make headers_*".
The default value is:
KBUILD_MODPOST_WARN
--------------------------------------------------
-KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
-symbols in the final module linking stage.
+KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
+symbols in the final module linking stage. It changes such errors
+into warnings.
-KBUILD_MODPOST_FINAL
+KBUILD_MODPOST_NOFINAL
--------------------------------------------------
KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-This is solely usefull to speed up test compiles.
+This is solely useful to speed up test compiles.
KBUILD_EXTRA_SYMBOLS
--------------------------------------------------
-For modules use symbols from another modules.
+For modules that use symbols from other modules.
See more details in modules.txt.
ALLSOURCE_ARCHS
--------------------------------------------------
-For tags/TAGS/cscope targets, you can specify more than one archs
-to be included in the databases, separated by blankspace. e.g.
+For tags/TAGS/cscope targets, you can specify more than one arch
+to be included in the databases, separated by blank space. E.g.:
$ make ALLSOURCE_ARCHS="x86 mips arm" tags
a memory unit (amount[KMG]). See also
Documentation/kdump/kdump.txt for a example.
- cs4232= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
-
cs89x0_dma= [HW,NET]
Format: <dma>
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
- es1371= [HW,OSS]
- Format: <spdif>,[<nomix>,[<amplifier>]]
- See also header of sound/oss/es1371.c.
-
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
# This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include
+CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
LDLIBS:=-lz
all: lguest
initialized and attempts to bring up the supplied dev at the supplied
address.
-The remote host can run either 'netcat -u -l -p <port>' or syslogd.
+The remote host can run either 'netcat -u -l -p <port>',
+'nc -l -u <port>' or syslogd.
Dynamic reconfiguration:
========================
STAC92HD83*
===========
ref Reference board
+ mic-ref Reference board with power managment for ports
STAC9872
========
P: Ben Dooks (embedded platforms)
M: ben-linux@fluff.org
L: linux-i2c@vger.kernel.org
-T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
+W: http://i2c.wiki.kernel.org/
+T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
S: Maintained
I2C-TINY-USB DRIVER
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
# Where to locate arch specific headers
hdr-arch := $(SRCARCH)
+ifeq ($(ARCH),m68knommu)
+ hdr-arch := m68k
+endif
+
KCONFIG_CONFIG ?= .config
# SHELL used by kbuild
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
-strip-symbols := $(srctree)/scripts/strip-symbols \
- $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
-
#
-# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
-# they get installed. If INSTALL_MOD_STRIP is '1', then the default
-# options (see below) will be used. Otherwise, INSTALL_MOD_STRIP will
-# be used as the option(s) to the objcopy command.
+# INSTALL_MOD_STRIP, if defined, will cause modules to be
+# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
+# the default option --strip-debug will be used. Otherwise,
+# INSTALL_MOD_STRIP will used as the options to the strip command.
+
ifdef INSTALL_MOD_STRIP
ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(OBJCOPY) --strip-debug
-ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
-mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
-endif
+mod_strip_cmd = $(STRIP) --strip-debug
else
-mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
endif # INSTALL_MOD_STRIP=1
else
-mod_strip_cmd = false
+mod_strip_cmd = true
endif # INSTALL_MOD_STRIP
export mod_strip_cmd
endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \
# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@
- cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
- | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
+ cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+ $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
-quiet_cmd_kstrip = STRIP $@
- cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
-
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
-ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
-strip-ext := .stripped
-endif
-
-.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
$(call cmd,kallsyms)
-# make -jN seems to have problems with intermediate files, see bug #3330.
-.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
-.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
- $(call cmd,kstrip)
-
-ifneq ($(CONFIG_DEBUG_INFO),y)
-.tmp_vmlinux%: LDFLAGS_vmlinux += -S
-endif
# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
- $(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+ $(call if_changed_rule,ksym_ld)
-.tmp_vmlinux0$(strip-ext):
- $(Q)echo "placeholder" >$@
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+ $(call if_changed,vmlinux__)
-.tmp_vmlinux1: .tmp_kallsyms0.o
-.tmp_vmlinux2: .tmp_kallsyms1.o
-.tmp_vmlinux3: .tmp_kallsyms2.o
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+ $(call if_changed,vmlinux__)
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_SYSCALL_WRAPPERS
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
/* ??? Would be nice to use .gprel32 here, but we can't be sure that the
function loaded the GP, so this could fail in modules. */
-static inline void ATTRIB_NORET __BUG(const char *file, int line)
-{
- __asm__ __volatile__(
- "call_pal %0 # bugchk\n\t"
- ".long %1\n\t.8byte %2"
- : : "i" (PAL_bugchk), "i"(line), "i"(file));
- for ( ; ; )
- ;
-}
-
-#define BUG() __BUG(__FILE__, __LINE__)
+#define BUG() { \
+ __asm__ __volatile__( \
+ "call_pal %0 # bugchk\n\t" \
+ ".long %1\n\t.8byte %2" \
+ : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \
+ for ( ; ; ); }
#define HAVE_ARCH_BUG
#endif
#else /* no PCI - no IOMMU. */
+#include <asm/io.h> /* for virt_to_phys() */
+
struct scatterlist;
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp);
osf_sigprocmask:
.prologue 0
mov $sp, $18
- jmp $31, do_osf_sigprocmask
+ jmp $31, sys_osf_sigprocmask
.end osf_sigprocmask
.align 4
* identical to OSF as we don't return 0 on success, but doing otherwise
* would require changes to libc. Hopefully this is good enough.
*/
-asmlinkage unsigned long
-osf_brk(unsigned long brk)
+SYSCALL_DEFINE1(osf_brk, unsigned long, brk)
{
unsigned long retval = sys_brk(brk);
if (brk && brk != retval)
/*
* This is pure guess-work..
*/
-asmlinkage int
-osf_set_program_attributes(unsigned long text_start, unsigned long text_len,
- unsigned long bss_start, unsigned long bss_len)
+SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
+ unsigned long, text_len, unsigned long, bss_start,
+ unsigned long, bss_len)
{
struct mm_struct *mm;
return -EFAULT;
}
-asmlinkage int
-osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent,
- unsigned int count, long __user *basep)
+SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
+ struct osf_dirent __user *, dirent, unsigned int, count,
+ long __user *, basep)
{
int error;
struct file *file;
#undef NAME_OFFSET
-asmlinkage unsigned long
-osf_mmap(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long off)
+SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, off)
{
struct file *file = NULL;
unsigned long ret = -EBADF;
return error;
}
-asmlinkage int
-osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
+SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
+ struct osf_statfs __user *, buffer, unsigned long, bufsiz)
{
struct path path;
int retval;
return retval;
}
-asmlinkage int
-osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz)
+SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
+ struct osf_statfs __user *, buffer, unsigned long, bufsiz)
{
struct file *file;
int retval;
return do_mount("", dirname, "proc", flags, NULL);
}
-asmlinkage int
-osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data)
+SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
+ int, flag, void __user *, data)
{
int retval = -EINVAL;
char *name;
return retval;
}
-asmlinkage int
-osf_utsname(char __user *name)
+SYSCALL_DEFINE1(osf_utsname, char __user *, name)
{
int error;
return error;
}
-asmlinkage unsigned long
-sys_getpagesize(void)
+SYSCALL_DEFINE0(getpagesize)
{
return PAGE_SIZE;
}
-asmlinkage unsigned long
-sys_getdtablesize(void)
+SYSCALL_DEFINE0(getdtablesize)
{
return sysctl_nr_open;
}
/*
* For compatibility with OSF/1 only. Use utsname(2) instead.
*/
-asmlinkage int
-osf_getdomainname(char __user *name, int namelen)
+SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
{
unsigned len;
int i;
PL_DEL = 5, PL_FDEL = 6
};
-asmlinkage long
-osf_proplist_syscall(enum pl_code code, union pl_args __user *args)
+SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
+ union pl_args __user *, args)
{
long error;
int __user *min_buf_size_ptr;
return error;
}
-asmlinkage int
-osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss)
+SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
+ struct sigstack __user *, uoss)
{
unsigned long usp = rdusp();
unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size;
return error;
}
-asmlinkage long
-osf_sysinfo(int command, char __user *buf, long count)
+SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
{
char *sysinfo_table[] = {
utsname()->sysname,
return err;
}
-asmlinkage unsigned long
-osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
- int __user *start, void __user *arg)
+SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
+ unsigned long, nbytes, int __user *, start, void __user *, arg)
{
unsigned long w;
struct percpu_struct *cpu;
return -EOPNOTSUPP;
}
-asmlinkage unsigned long
-osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
- int __user *start, void __user *arg)
+SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
+ unsigned long, nbytes, int __user *, start, void __user *, arg)
{
switch (op) {
case SSI_IEEE_FP_CONTROL: {
value->tv_sec = jiffies / HZ;
}
-asmlinkage int
-osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz)
+SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv,
+ struct timezone __user *, tz)
{
if (tv) {
struct timeval ktv;
return 0;
}
-asmlinkage int
-osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz)
+SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
+ struct timezone __user *, tz)
{
struct timespec kts;
struct timezone ktz;
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
}
-asmlinkage int
-osf_getitimer(int which, struct itimerval32 __user *it)
+SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it)
{
struct itimerval kit;
int error;
return error;
}
-asmlinkage int
-osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out)
+SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in,
+ struct itimerval32 __user *, out)
{
struct itimerval kin, kout;
int error;
}
-asmlinkage int
-osf_utimes(char __user *filename, struct timeval32 __user *tvs)
+SYSCALL_DEFINE2(osf_utimes, char __user *, filename,
+ struct timeval32 __user *, tvs)
{
struct timespec tv[2];
#define MAX_SELECT_SECONDS \
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
-asmlinkage int
-osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
- struct timeval32 __user *tvp)
+SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp,
+ fd_set __user *, exp, struct timeval32 __user *, tvp)
{
struct timespec end_time, *to = NULL;
if (tvp) {
long ru_nivcsw; /* involuntary " */
};
-asmlinkage int
-osf_getrusage(int who, struct rusage32 __user *ru)
+SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
{
struct rusage32 r;
return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
}
-asmlinkage long
-osf_wait4(pid_t pid, int __user *ustatus, int options,
- struct rusage32 __user *ur)
+SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
+ struct rusage32 __user *, ur)
{
struct rusage r;
long ret, err;
* seems to be a timeval pointer, and I suspect the second
* one is the time remaining.. Ho humm.. No documentation.
*/
-asmlinkage int
-osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain)
+SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep,
+ struct timeval32 __user *, remain)
{
struct timeval tmp;
unsigned long ticks;
int :32; int :32; int :32; int :32;
};
-asmlinkage int
-sys_old_adjtimex(struct timex32 __user *txc_p)
+SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
{
struct timex txc;
int ret;
return 0;
}
-asmlinkage ssize_t
-osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count)
+SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
+ const struct iovec __user *, vector, unsigned long, count)
{
if (unlikely(personality(current->personality) == PER_OSF4))
if (osf_fix_iov_len(vector, count))
return sys_readv(fd, vector, count);
}
-asmlinkage ssize_t
-osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count)
+SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
+ const struct iovec __user *, vector, unsigned long, count)
{
if (unlikely(personality(current->personality) == PER_OSF4))
if (osf_fix_iov_len(vector, count))
/* Stubs for the routines in pci_iommu.c: */
void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+ dma_addr_t *dma_addrp, gfp_t gfp)
{
return NULL;
}
#include <linux/tty.h>
#include <linux/binfmts.h>
#include <linux/bitops.h>
+#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include <asm/sigcontext.h>
* Note that we don't need to acquire the kernel lock for SMP
* operation, as all of this is local to this thread.
*/
-asmlinkage unsigned long
-do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs)
+SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
+ struct pt_regs *, regs)
{
unsigned long oldmask = -EINVAL;
return oldmask;
}
-asmlinkage int
-osf_sigaction(int sig, const struct osf_sigaction __user *act,
- struct osf_sigaction __user *oact)
+SYSCALL_DEFINE3(osf_sigaction, int, sig,
+ const struct osf_sigaction __user *, act,
+ struct osf_sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
return ret;
}
-asmlinkage long
-sys_rt_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact,
- size_t sigsetsize, void __user *restorer)
+SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+ struct sigaction __user *, oact,
+ size_t, sigsetsize, void __user *, restorer)
{
struct k_sigaction new_ka, old_ka;
int ret;
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
+ cpumask_t mask = cpu_online_map;
- if (cpu_test_and_set(cpuid, cpu_online_map)) {
+ if (cpu_test_and_set(cpuid, mask)) {
printk("??, cpu 0x%x already present??\n", cpuid);
BUG();
}
.quad sys_write
.quad alpha_ni_syscall /* 5 */
.quad sys_close
- .quad osf_wait4
+ .quad sys_osf_wait4
.quad alpha_ni_syscall
.quad sys_link
.quad sys_unlink /* 10 */
.quad sys_mknod
.quad sys_chmod /* 15 */
.quad sys_chown
- .quad osf_brk
+ .quad sys_osf_brk
.quad alpha_ni_syscall
.quad sys_lseek
.quad sys_getxpid /* 20 */
- .quad osf_mount
+ .quad sys_osf_mount
.quad sys_umount
.quad sys_setuid
.quad sys_getxuid
.quad alpha_ni_syscall /* 40 */
.quad sys_dup
.quad sys_alpha_pipe
- .quad osf_set_program_attributes
+ .quad sys_osf_set_program_attributes
.quad alpha_ni_syscall
.quad sys_open /* 45 */
.quad alpha_ni_syscall
.quad sys_newlstat
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 70 */
- .quad osf_mmap
+ .quad sys_osf_mmap
.quad alpha_ni_syscall
.quad sys_munmap
.quad sys_mprotect
.quad sys_setgroups /* 80 */
.quad alpha_ni_syscall
.quad sys_setpgid
- .quad osf_setitimer
+ .quad sys_osf_setitimer
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 85 */
- .quad osf_getitimer
+ .quad sys_osf_getitimer
.quad sys_gethostname
.quad sys_sethostname
.quad sys_getdtablesize
.quad sys_dup2 /* 90 */
.quad sys_newfstat
.quad sys_fcntl
- .quad osf_select
+ .quad sys_osf_select
.quad sys_poll
.quad sys_fsync /* 95 */
.quad sys_setpriority
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 110 */
.quad sys_sigsuspend
- .quad osf_sigstack
+ .quad sys_osf_sigstack
.quad sys_recvmsg
.quad sys_sendmsg
.quad alpha_ni_syscall /* 115 */
- .quad osf_gettimeofday
- .quad osf_getrusage
+ .quad sys_osf_gettimeofday
+ .quad sys_osf_getrusage
.quad sys_getsockopt
.quad alpha_ni_syscall
#ifdef CONFIG_OSF4_COMPAT
- .quad osf_readv /* 120 */
- .quad osf_writev
+ .quad sys_osf_readv /* 120 */
+ .quad sys_osf_writev
#else
.quad sys_readv /* 120 */
.quad sys_writev
#endif
- .quad osf_settimeofday
+ .quad sys_osf_settimeofday
.quad sys_fchown
.quad sys_fchmod
.quad sys_recvfrom /* 125 */
.quad sys_socketpair /* 135 */
.quad sys_mkdir
.quad sys_rmdir
- .quad osf_utimes
+ .quad sys_osf_utimes
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 140 */
.quad sys_getpeername
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 155 */
- .quad osf_sigaction
+ .quad sys_osf_sigaction
.quad alpha_ni_syscall
.quad alpha_ni_syscall
- .quad osf_getdirentries
- .quad osf_statfs /* 160 */
- .quad osf_fstatfs
+ .quad sys_osf_getdirentries
+ .quad sys_osf_statfs /* 160 */
+ .quad sys_osf_fstatfs
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall
- .quad osf_getdomainname /* 165 */
+ .quad sys_osf_getdomainname /* 165 */
.quad sys_setdomainname
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad sys_semctl
.quad sys_semget /* 205 */
.quad sys_semop
- .quad osf_utsname
+ .quad sys_osf_utsname
.quad sys_lchown
.quad sys_shmat
.quad sys_shmctl /* 210 */
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 240 */
- .quad osf_sysinfo
+ .quad sys_osf_sysinfo
.quad alpha_ni_syscall
.quad alpha_ni_syscall
- .quad osf_proplist_syscall
+ .quad sys_osf_proplist_syscall
.quad alpha_ni_syscall /* 245 */
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 250 */
- .quad osf_usleep_thread
+ .quad sys_osf_usleep_thread
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad sys_sysfs
.quad alpha_ni_syscall /* 255 */
- .quad osf_getsysinfo
- .quad osf_setsysinfo
+ .quad sys_osf_getsysinfo
+ .quad sys_osf_setsysinfo
.quad alpha_ni_syscall
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 260 */
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
+/*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ * An entry with a NULL ID is assumed to be a wildcard.
+ * If an entry has a device ID, it must match
+ * If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
static struct clk *clk_find(const char *dev_id, const char *con_id)
{
struct clk_lookup *p;
int match, best = 0;
list_for_each_entry(p, &clocks, node) {
- if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
- continue;
match = 0;
- if (p->dev_id)
- match += 2 * (strcmp(p->dev_id, dev_id) == 0);
- if (p->con_id)
- match += 1 * (strcmp(p->con_id, con_id) == 0);
+ if (p->dev_id) {
+ if (!dev_id || strcmp(p->dev_id, dev_id))
+ continue;
+ match += 2;
+ }
+ if (p->con_id) {
+ if (!con_id || strcmp(p->con_id, con_id))
+ continue;
+ match += 1;
+ }
if (match == 0)
continue;
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
#
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# Other I2C Chip support
#
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCA9633=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# Other I2C Chip support
#
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_TSC2101=y
# CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
#include <mach/common.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
.num_resources = ARRAY_SIZE(usb_resources),
};
-#ifdef CONFIG_USB_MUSB_OTG
-
-static struct otg_transceiver *xceiv;
-
-struct otg_transceiver *otg_get_transceiver(void)
-{
- if (xceiv)
- get_device(xceiv->dev);
- return xceiv;
-}
-EXPORT_SYMBOL(otg_get_transceiver);
-
-int otg_set_transceiver(struct otg_transceiver *x)
-{
- if (xceiv && x)
- return -EBUSY;
- xceiv = x;
- return 0;
-}
-EXPORT_SYMBOL(otg_set_transceiver);
-
-#endif
-
void __init setup_usb(unsigned mA, unsigned potpgt_msec)
{
usb_data.power = mA / 2;
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpio-switch.h>
#include <mach/mux.h>
+#include <mach/dma.h>
#include <mach/tc.h>
#include <mach/nand.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
.id = -1,
};
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(15),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
- .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
- /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "H2 TSC2101",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* tsc2101_configure, */
- .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2101_clock_setup, */
- .codec_clock_on = NULL, /* tsc2101_clock_on, */
- .codec_clock_off = NULL, /* tsc2101_clock_off, */
- .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
- &h2_mcbsp1_device,
};
static void __init h2_init_smc91x(void)
#define H2_NAND_RB_GPIO_PIN 62
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#define H3_TS_GPIO 48
},
};
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(15),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
- .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
- /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "H3 TSC2101",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* tsc2101_configure, */
- .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2101_clock_setup, */
- .codec_clock_on = NULL, /* tsc2101_clock_on, */
- .codec_clock_off = NULL, /* tsc2101_clock_off, */
- .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
- &h3_mcbsp1_device,
};
static struct omap_usb_config h3_usb_config __initdata = {
},
};
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
- {
- .name = "mmc_slot",
- .gpio = OMAP_MPUIO(1),
- .type = OMAP_GPIO_SWITCH_TYPE_COVER,
- .debounce_rising = 100,
- .debounce_falling = 0,
- .notify = h3_mmc_slot_cover_handler,
- .notify_data = NULL,
- },
-};
-
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct omap_nand_platform_data *data)
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#include <mach/mmc.h>
static int innovator_keymap[] = {
.resource = &innovator_flash_resource,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "OMAP Innovator AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure, */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
- .codec_clock_setup = NULL, /* aic23_clock_setup, */
- .codec_clock_on = NULL, /* aic23_clock_on, */
- .codec_clock_off = NULL, /* aic23_clock_off, */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device innovator_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct resource innovator_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
- &innovator_mcbsp1_device,
&innovator_kp_device,
&innovator1510_lcd_device,
&innovator1510_spi_device,
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/dsp_common.h>
-#include <mach/aic23.h>
#include <mach/omapfb.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
*/
static int audio_pwr_state = -1;
+static inline void aic23_power_up(void)
+{
+}
+static inline void aic23_power_down(void)
+{
+}
+
/*
* audio_pwr_up / down should be called under audio_pwr_lock
*/
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
.resource = osk5912_cf_resources,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "OSK AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure, */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
- .codec_clock_setup = NULL, /* aic23_clock_setup, */
- .codec_clock_on = NULL, /* aic23_clock_on, */
- .codec_clock_off = NULL, /* aic23_clock_off, */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device,
&osk5912_smc91x_device,
&osk5912_cf_device,
- &osk5912_mcbsp1_device,
};
static struct gpio_led tps_leds[] = {
.platform_data = &tps_board,
},
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1B),
+ },
/* TODO when driver support is ready:
- * - aic23 audio chip at 0x1a
* - optionally on Mistral, ov9640 camera sensor at 0x30
*/
};
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
static void __init omap_palmte_init_irq(void)
{
.pins[0] = 2,
};
-static struct omap_mmc_config palmte_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wp_pin = PALMTE_MMC_WP_GPIO,
- .power_pin = PALMTE_MMC_POWER_GPIO,
- .switch_pin = PALMTE_MMC_SWITCH_GPIO,
- },
-};
-
static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal",
};
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
- .spcr2 = FRST | GRST | XRST | XINTM(3),
- .xcr2 = XDATDLY(1) | XFIG,
- .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
- .pcr0 = SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
- .name = "TSC2102 audio",
- .mcbsp_regs_alsa = &palmte_mcbsp1_regs,
- .codec_configure_dev = NULL, /* tsc2102_configure, */
- .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2102_clock_setup, */
- .codec_clock_on = NULL, /* tsc2102_clock_on, */
- .codec_clock_off = NULL, /* tsc2102_clock_off, */
- .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
-};
-
#ifdef CONFIG_APM
/*
* Values measured in 10 minute intervals averaged over 10 samples.
#include <asm/mach/flash.h>
#include <mach/led.h>
-#include <mach/mcbsp.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/omap-alsa.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
.resource = &palmtt_flash_resource,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
- RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
- XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM |
- FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "PalmTT AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure, */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
- .codec_clock_setup = NULL, /* aic23_clock_setup, */
- .codec_clock_on = NULL, /* aic23_clock_on, */
- .codec_clock_off = NULL, /* aic23_clock_off, */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device palmtt_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct resource palmtt_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
static struct platform_device *palmtt_devices[] __initdata = {
&palmtt_flash_device,
- &palmtt_mcbsp1_device,
&palmtt_kp_device,
&palmtt_lcd_device,
&palmtt_irda_device,
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/mcbsp.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
.id = -1,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "PalmZ71 AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate */
- .codec_clock_setup = NULL, /* aic23_clock_setup */
- .codec_clock_on = NULL, /* aic23_clock_on */
- .codec_clock_off = NULL, /* aic23_clock_off */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate */
-};
-
-static struct platform_device palmz71_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct omap_backlight_config palmz71_backlight_config = {
.default_intensity = 0xa0,
};
static struct platform_device *devices[] __initdata = {
&palmz71_rom_device,
&palmz71_kp_device,
- &palmz71_mcbsp1_device,
&palmz71_lcd_device,
&palmz71_irda_device,
&palmz71_spi_device,
#include <mach/gpio.h>
#include <mach/mux.h>
+#include <mach/dma.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#include <mach/keypad.h>
/* Write to I2C device */
.resource = sx1_irda_resources,
};
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
- .spcr2 = XINTM(3), /* SPCR2=30 */
- .spcr1 = RINTM(3), /* SPCR1=30 */
- .rcr2 = 0, /* RCR2 =00 */
- .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */
- .xcr2 = 0, /* XCR2 = 0 */
- .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
- .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
- .srgr2 = FSGM | FPER(31), /* SRGR2=101f */
- .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
- /* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
- .name = "SX1 EGold",
- .mcbsp_regs_alsa = &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &sx1_alsa_config,
- },
-};
-
/*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = {
&sx1_flash_device,
&sx1_kp_device,
&sx1_lcd_device,
- &sx1_mcbsp1_device,
&sx1_irda_device,
};
/*-----------------------------------------*/
/* turn on USB power */
/* sx1_setusbpower(1); cant do it here because i2c is not ready */
- omap_request_gpio(1); /* A_IRDA_OFF */
- omap_request_gpio(11); /* A_SWITCH */
- omap_request_gpio(15); /* A_USB_ON */
+ gpio_request(1, "A_IRDA_OFF");
+ gpio_request(11, "A_SWITCH");
+ gpio_request(15, "A_USB_ON");
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
-#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/err.h>
{
/* LED0 - AA10 */
omap_cfg_reg(AA10_242X_GPIO13);
- omap_request_gpio(LED0_GPIO13);
- omap_set_gpio_direction(LED0_GPIO13, 0);
- omap_set_gpio_dataout(LED0_GPIO13, 0);
+ gpio_request(LED0_GPIO13, "LED0");
+ gpio_direction_output(LED0_GPIO13, 0);
/* LED1 - AA6 */
omap_cfg_reg(AA6_242X_GPIO14);
- omap_request_gpio(LED1_GPIO14);
- omap_set_gpio_direction(LED1_GPIO14, 0);
- omap_set_gpio_dataout(LED1_GPIO14, 0);
+ gpio_request(LED1_GPIO14, "LED1");
+ gpio_direction_output(LED1_GPIO14, 0);
/* LED2 - AA4 */
omap_cfg_reg(AA4_242X_GPIO15);
- omap_request_gpio(LED2_GPIO15);
- omap_set_gpio_direction(LED2_GPIO15, 0);
- omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
- static unsigned int led0, led1, led2;
-
- if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
- omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
- else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
- omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
- else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
- omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
- return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
- /* Enter SW - Y11 */
- omap_cfg_reg(Y11_242X_GPIO16);
- omap_request_gpio(SW_ENTER_GPIO16);
- gpio_direction_input(SW_ENTER_GPIO16);
- /* Up SW - AA12 */
- omap_cfg_reg(AA12_242X_GPIO17);
- omap_request_gpio(SW_UP_GPIO17);
- gpio_direction_input(SW_UP_GPIO17);
- /* Down SW - AA8 */
- omap_cfg_reg(AA8_242X_GPIO58);
- omap_request_gpio(SW_DOWN_GPIO58);
- gpio_direction_input(SW_DOWN_GPIO58);
-
- set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
- if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
- IRQF_SHARED, "enter sw",
- &apollon_sw_interrupt))
- return;
- set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
- if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
- IRQF_SHARED, "up sw",
- &apollon_sw_interrupt))
- return;
- set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
- if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
- IRQF_SHARED, "down sw",
- &apollon_sw_interrupt))
- return;
+ gpio_request(LED2_GPIO15, "LED2");
+ gpio_direction_output(LED2_GPIO15, 0);
}
static void __init apollon_usb_init(void)
u32 v;
apollon_led_init();
- apollon_sw_init();
apollon_flash_init();
apollon_usb_init();
ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
- if (omap_request_gpio(eth_gpio) < 0) {
+ if (gpio_request(eth_gpio, "smc911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
eth_gpio);
return;
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/i2c/twl4030.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_cfg_reg(AH8_34XX_GPIO29);
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap_serial_init();
- omap_cfg_reg(AH8_34XX_GPIO29);
- mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
-
omap_cfg_reg(J25_34XX_GPIO170);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
}
-void v4_mc_copy_user_highpage(struct page *from, struct page *to,
+void v4_mc_copy_user_highpage(struct page *to, struct page *from,
unsigned long vaddr)
{
void *kto = kmap_atomic(to, KM_USER1);
*/
static void unmap_area_sections(unsigned long virt, unsigned long size)
{
- unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+ unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
pgd_t *pgd;
flush_cache_vunmap(addr, end);
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
#ifndef CONFIG_SMP
struct vm_struct **p, *tmp;
-#endif
- unsigned int section_mapping = 0;
-#ifndef CONFIG_SMP
/*
* If this is a section based mapping we need to handle it
* specially as the VM subsystem does not know how to handle
for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
if (tmp->flags & VM_ARM_SECTION_MAPPING) {
- *p = tmp->next;
unmap_area_sections((unsigned long)tmp->addr,
tmp->size);
- kfree(tmp);
- section_mapping = 1;
}
break;
}
write_unlock(&vmlist_lock);
#endif
- if (!section_mapping)
- vunmap(addr);
+ vunmap(addr);
}
EXPORT_SYMBOL(__iounmap);
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_H_
+#define _IPU_H_
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+ IDMAC_IC_0 = 0, /* IC (encoding task) to memory */
+ IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */
+ IDMAC_ADC_0 = 1,
+ IDMAC_IC_2 = 2,
+ IDMAC_ADC_1 = 2,
+ IDMAC_IC_3 = 3,
+ IDMAC_IC_4 = 4,
+ IDMAC_IC_5 = 5,
+ IDMAC_IC_6 = 6,
+ IDMAC_IC_7 = 7, /* IC (sensor data) to memory */
+ IDMAC_IC_8 = 8,
+ IDMAC_IC_9 = 9,
+ IDMAC_IC_10 = 10,
+ IDMAC_IC_11 = 11,
+ IDMAC_IC_12 = 12,
+ IDMAC_IC_13 = 13,
+ IDMAC_SDC_0 = 14, /* Background synchronous display data */
+ IDMAC_SDC_1 = 15, /* Foreground data (overlay) */
+ IDMAC_SDC_2 = 16,
+ IDMAC_SDC_3 = 17,
+ IDMAC_ADC_2 = 18,
+ IDMAC_ADC_3 = 19,
+ IDMAC_ADC_4 = 20,
+ IDMAC_ADC_5 = 21,
+ IDMAC_ADC_6 = 22,
+ IDMAC_ADC_7 = 23,
+ IDMAC_PF_0 = 24,
+ IDMAC_PF_1 = 25,
+ IDMAC_PF_2 = 26,
+ IDMAC_PF_3 = 27,
+ IDMAC_PF_4 = 28,
+ IDMAC_PF_5 = 29,
+ IDMAC_PF_6 = 30,
+ IDMAC_PF_7 = 31,
+};
+
+/* Order significant! */
+enum ipu_channel_status {
+ IPU_CHANNEL_FREE,
+ IPU_CHANNEL_INITIALIZED,
+ IPU_CHANNEL_READY,
+ IPU_CHANNEL_ENABLED,
+};
+
+#define IPU_CHANNELS_NUM 32
+
+enum pixel_fmt {
+ /* 1 byte */
+ IPU_PIX_FMT_GENERIC,
+ IPU_PIX_FMT_RGB332,
+ IPU_PIX_FMT_YUV420P,
+ IPU_PIX_FMT_YUV422P,
+ IPU_PIX_FMT_YUV420P2,
+ IPU_PIX_FMT_YVU422P,
+ /* 2 bytes */
+ IPU_PIX_FMT_RGB565,
+ IPU_PIX_FMT_RGB666,
+ IPU_PIX_FMT_BGR666,
+ IPU_PIX_FMT_YUYV,
+ IPU_PIX_FMT_UYVY,
+ /* 3 bytes */
+ IPU_PIX_FMT_RGB24,
+ IPU_PIX_FMT_BGR24,
+ /* 4 bytes */
+ IPU_PIX_FMT_GENERIC_32,
+ IPU_PIX_FMT_RGB32,
+ IPU_PIX_FMT_BGR32,
+ IPU_PIX_FMT_ABGR32,
+ IPU_PIX_FMT_BGRA32,
+ IPU_PIX_FMT_RGBA32,
+};
+
+enum ipu_color_space {
+ IPU_COLORSPACE_RGB,
+ IPU_COLORSPACE_YCBCR,
+ IPU_COLORSPACE_YUV
+};
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+enum ipu_rotate_mode {
+ /* Note the enum values correspond to BAM value */
+ IPU_ROTATE_NONE = 0,
+ IPU_ROTATE_VERT_FLIP = 1,
+ IPU_ROTATE_HORIZ_FLIP = 2,
+ IPU_ROTATE_180 = 3,
+ IPU_ROTATE_90_RIGHT = 4,
+ IPU_ROTATE_90_RIGHT_VFLIP = 5,
+ IPU_ROTATE_90_RIGHT_HFLIP = 6,
+ IPU_ROTATE_90_LEFT = 7,
+};
+
+struct ipu_platform_data {
+ unsigned int irq_base;
+};
+
+/*
+ * Enumeration of DI ports for ADC.
+ */
+enum display_port {
+ DISP0,
+ DISP1,
+ DISP2,
+ DISP3
+};
+
+struct idmac_video_param {
+ unsigned short in_width;
+ unsigned short in_height;
+ uint32_t in_pixel_fmt;
+ unsigned short out_width;
+ unsigned short out_height;
+ uint32_t out_pixel_fmt;
+ unsigned short out_stride;
+ bool graphics_combine_en;
+ bool global_alpha_en;
+ bool key_color_en;
+ enum display_port disp;
+ unsigned short out_left;
+ unsigned short out_top;
+};
+
+/*
+ * Union of initialization parameters for a logical channel. So far only video
+ * parameters are used.
+ */
+union ipu_channel_param {
+ struct idmac_video_param video;
+};
+
+struct idmac_tx_desc {
+ struct dma_async_tx_descriptor txd;
+ struct scatterlist *sg; /* scatterlist for this */
+ unsigned int sg_len; /* tx-descriptor. */
+ struct list_head list;
+};
+
+struct idmac_channel {
+ struct dma_chan dma_chan;
+ dma_cookie_t completed; /* last completed cookie */
+ union ipu_channel_param params;
+ enum ipu_channel link; /* input channel, linked to the output */
+ enum ipu_channel_status status;
+ void *client; /* Only one client per channel */
+ unsigned int n_tx_desc;
+ struct idmac_tx_desc *desc; /* allocated tx-descriptors */
+ struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */
+ struct list_head free_list; /* free tx-descriptors */
+ struct list_head queue; /* queued tx-descriptors */
+ spinlock_t lock; /* protects sg[0,1], queue */
+ struct mutex chan_mutex; /* protects status, cookie, free_list */
+ bool sec_chan_en;
+ int active_buffer;
+ unsigned int eof_irq;
+ char eof_name[16]; /* EOF IRQ name for request_irq() */
+};
+
+#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
+#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
+
+#endif
#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
#define MXC_BOARD_IRQS 16
-#define NR_IRQS (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
+#ifdef CONFIG_MX3_IPU_IRQS
+#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
+#else
+#define MX3_IPU_IRQS 0
+#endif
+
+#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH 0x80000000
+#define FB_SYNC_CLK_INVERT 0x40000000
+#define FB_SYNC_DATA_INVERT 0x20000000
+#define FB_SYNC_CLK_IDLE_EN 0x10000000
+#define FB_SYNC_SHARP_MODE 0x08000000
+#define FB_SYNC_SWAP_RGB 0x04000000
+#define FB_SYNC_CLK_SEL_EN 0x02000000
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev: pointer to the dma-device, used for dma-slave connection
+ * @mode: pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+ struct device *dma_dev;
+ const char *name;
+ const struct fb_videomode *mode;
+ int num_modes;
+};
+
+#endif
u32 val;
val = dma_read(CCR(lch));
- val &= ~(3 << 19);
- if (dma_trigger > 63)
- val |= 1 << 20;
- if (dma_trigger > 31)
- val |= 1 << 19;
-
- val &= ~(0x1f);
- val |= (dma_trigger & 0x1f);
+
+ /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+ val &= ~((3 << 19) | 0x1f);
+ val |= (dma_trigger & ~0x1f) << 14;
+ val |= dma_trigger & 0x1f;
if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5;
/* FIXME for at least omap2, show pullup/pulldown state */
irqstat = irq_desc[irq].status;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
(bank->suspend_wakeup & mask)
? " wakeup" : "");
}
+#endif
seq_printf(s, "\n");
}
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR 0x00
-#define RIGHT_LINE_VOLUME_ADDR 0x01
-#define LEFT_CHANNEL_VOLUME_ADDR 0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR 0x03
-#define ANALOG_AUDIO_CONTROL_ADDR 0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR 0x05
-#define POWER_DOWN_CONTROL_ADDR 0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR 0x07
-#define SAMPLE_RATE_CONTROL_ADDR 0x08
-#define DIGITAL_INTERFACE_ACT_ADDR 0x09
-#define RESET_CONTROL_ADDR 0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED 0x0100
-#define LIM_MUTED 0x0080
-#define LIV_DEFAULT 0x0017
-#define LIV_MAX 0x001f
-#define LIV_MIN 0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON 0x0080
-#define LHV_DEFAULT 0x0079
-#define LHV_MAX 0x007f
-#define LHV_MIN 0x0000
-
-// Analog audio path control register
-#define STA_REG(x) ((x)<<6)
-#define STE_ENABLED 0x0020
-#define DAC_SELECTED 0x0010
-#define BYPASS_ON 0x0008
-#define INSEL_MIC 0x0004
-#define MICM_MUTED 0x0002
-#define MICB_20DB 0x0001
-
-// Digital audio path control register
-#define DACM_MUTE 0x0008
-#define DEEMP_32K 0x0002
-#define DEEMP_44K 0x0004
-#define DEEMP_48K 0x0006
-#define ADCHP_ON 0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF 0x0080
-#define CLK_OFF 0x0040
-#define OSC_OFF 0x0020
-#define OUT_OFF 0x0010
-#define DAC_OFF 0x0008
-#define ADC_OFF 0x0004
-#define MIC_OFF 0x0002
-#define LINE_OFF 0x0001
-
-// Digital audio interface register
-#define MS_MASTER 0x0040
-#define LRSWAP_ON 0x0020
-#define LRP_ON 0x0010
-#define IWL_16 0x0000
-#define IWL_20 0x0004
-#define IWL_24 0x0008
-#define IWL_32 0x000C
-#define FOR_I2S 0x0002
-#define FOR_DSP 0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF 0x0080
-#define CLKIN_HALF 0x0040
-#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON 0x0001
-#define SR_MASK 0xf
-#define CLKOUT_SHIFT 7
-#define CLKIN_SHIFT 6
-#define SR_SHIFT 2
-#define BOSR_SHIFT 1
-
-// Digital interface register
-#define ACT_ON 0x0001
-
-#define TLV320AIC23ID1 (0x1a) // cs low
-#define TLV320AIC23ID2 (0x1b) // cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START 0x04000300
+#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4)
+
extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
#endif /* __ASM_ARCH_OMAP_H3_H */
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int omap_request_gpio(int gpio)
-{
- return gpio_request(gpio, "FIXME");
-}
-
-static inline void omap_free_gpio(int gpio)
-{
- gpio_free(gpio);
-}
-
static inline int gpio_get_value(unsigned gpio)
{
return __gpio_get_value(gpio);
#define OMAP_MCBSP_REG_XCERG 0x3A
#define OMAP_MCBSP_REG_XCERH 0x3C
+/* Dummy defines, these are not available on omap1 */
+#define OMAP_MCBSP_REG_XCCR 0x00
+#define OMAP_MCBSP_REG_RCCR 0x00
+
#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */
/*********************** McBSP XCCR bit definitions *************************/
+#define EXTCLKGATE 0x8000
+#define PPCONNECT 0x4000
+#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */
+#define XFULL_CYCLE 0x0800
#define DILB 0x0020
#define XDMAEN 0x0008
#define XDISABLE 0x0001
/********************** McBSP RCCR bit definitions *************************/
+#define RFULL_CYCLE 0x0800
#define RDMAEN 0x0008
#define RDISABLE 0x0001
u16 rcerh;
u16 xcerg;
u16 xcerh;
+ u16 xccr;
+ u16 rccr;
};
typedef enum {
OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
+ OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
+ }
}
EXPORT_SYMBOL(omap_mcbsp_config);
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_GADGET_OMAP) || \
- defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
- (defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
-static void usb_release(struct device *dev)
-{
- /* normally not freed */
-}
-#endif
-
#ifdef CONFIG_USB_GADGET_OMAP
static struct resource udc_resources[] = {
.name = "omap_udc",
.id = -1,
.dev = {
- .release = usb_release,
.dma_mask = &udc_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.name = "ohci",
.id = -1,
.dev = {
- .release = usb_release,
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = 0xffffffff,
},
static struct platform_device otg_device = {
.name = "omap_otg",
.id = -1,
- .dev = {
- .release = usb_release,
- },
.num_resources = ARRAY_SIZE(otg_resources),
.resource = otg_resources,
};
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
CONFIG_SENSORS_AD5252=m
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# SPI Protocol Masters
#
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
# CONFIG_SENSORS_PCA9543 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
#
# SPI Protocol Masters
#
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
CONFIG_SPI_SPIDEV=y
#
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
# CONFIG_SENSORS_PCA9543 is not set
#
# SPI Protocol Masters
#
-CONFIG_SPI_AT25=m
+CONFIG_EEPROM_AT25=m
# CONFIG_SPI_SPIDEV is not set
#
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
--- /dev/null
+include include/asm-generic/Kbuild.asm
+header-y += cachectl.h
--- /dev/null
+
+/* include/asm-m68knommu/MC68328.h: '328 control registers
+ *
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68328_H_
+#define _MC68328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/**********
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR 0xfffff000
+#define SCR BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
+#define SCR_DMAP 0x04 /* Double Map */
+#define SCR_SO 0x08 /* Supervisor Only */
+#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
+#define SCR_PRV 0x20 /* Privilege Violation */
+#define SCR_WPV 0x40 /* Write Protect Violation */
+#define SCR_BETO 0x80 /* Bus-Error TimeOut */
+
+/*
+ * Mask Revision Register
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR LONG_REF(MRR_ADDR)
+
+/**********
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * Group Base Address Registers
+ */
+#define GRPBASEA_ADDR 0xfffff100
+#define GRPBASEB_ADDR 0xfffff102
+#define GRPBASEC_ADDR 0xfffff104
+#define GRPBASED_ADDR 0xfffff106
+
+#define GRPBASEA WORD_REF(GRPBASEA_ADDR)
+#define GRPBASEB WORD_REF(GRPBASEB_ADDR)
+#define GRPBASEC WORD_REF(GRPBASEC_ADDR)
+#define GRPBASED WORD_REF(GRPBASED_ADDR)
+
+#define GRPBASE_V 0x0001 /* Valid */
+#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */
+
+/*
+ * Group Base Address Mask Registers
+ */
+#define GRPMASKA_ADDR 0xfffff108
+#define GRPMASKB_ADDR 0xfffff10a
+#define GRPMASKC_ADDR 0xfffff10c
+#define GRPMASKD_ADDR 0xfffff10e
+
+#define GRPMASKA WORD_REF(GRPMASKA_ADDR)
+#define GRPMASKB WORD_REF(GRPMASKB_ADDR)
+#define GRPMASKC WORD_REF(GRPMASKC_ADDR)
+#define GRPMASKD WORD_REF(GRPMASKD_ADDR)
+
+#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */
+
+/*
+ * Chip-Select Option Registers (group A)
+ */
+#define CSA0_ADDR 0xfffff110
+#define CSA1_ADDR 0xfffff114
+#define CSA2_ADDR 0xfffff118
+#define CSA3_ADDR 0xfffff11c
+
+#define CSA0 LONG_REF(CSA0_ADDR)
+#define CSA1 LONG_REF(CSA1_ADDR)
+#define CSA2 LONG_REF(CSA2_ADDR)
+#define CSA3 LONG_REF(CSA3_ADDR)
+
+#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSA_WAIT_SHIFT 0
+#define CSA_RO 0x00000008 /* Read-Only */
+#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
+#define CSA_AM_SHIFT 8
+#define CSA_BUSW 0x00010000 /* Bus Width Select */
+#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
+#define CSA_AC_SHIFT 24
+
+/*
+ * Chip-Select Option Registers (group B)
+ */
+#define CSB0_ADDR 0xfffff120
+#define CSB1_ADDR 0xfffff124
+#define CSB2_ADDR 0xfffff128
+#define CSB3_ADDR 0xfffff12c
+
+#define CSB0 LONG_REF(CSB0_ADDR)
+#define CSB1 LONG_REF(CSB1_ADDR)
+#define CSB2 LONG_REF(CSB2_ADDR)
+#define CSB3 LONG_REF(CSB3_ADDR)
+
+#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSB_WAIT_SHIFT 0
+#define CSB_RO 0x00000008 /* Read-Only */
+#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
+#define CSB_AM_SHIFT 8
+#define CSB_BUSW 0x00010000 /* Bus Width Select */
+#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
+#define CSB_AC_SHIFT 24
+
+/*
+ * Chip-Select Option Registers (group C)
+ */
+#define CSC0_ADDR 0xfffff130
+#define CSC1_ADDR 0xfffff134
+#define CSC2_ADDR 0xfffff138
+#define CSC3_ADDR 0xfffff13c
+
+#define CSC0 LONG_REF(CSC0_ADDR)
+#define CSC1 LONG_REF(CSC1_ADDR)
+#define CSC2 LONG_REF(CSC2_ADDR)
+#define CSC3 LONG_REF(CSC3_ADDR)
+
+#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSC_WAIT_SHIFT 0
+#define CSC_RO 0x00000008 /* Read-Only */
+#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
+#define CSC_AM_SHIFT 4
+#define CSC_BUSW 0x00010000 /* Bus Width Select */
+#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
+#define CSC_AC_SHIFT 20
+
+/*
+ * Chip-Select Option Registers (group D)
+ */
+#define CSD0_ADDR 0xfffff140
+#define CSD1_ADDR 0xfffff144
+#define CSD2_ADDR 0xfffff148
+#define CSD3_ADDR 0xfffff14c
+
+#define CSD0 LONG_REF(CSD0_ADDR)
+#define CSD1 LONG_REF(CSD1_ADDR)
+#define CSD2 LONG_REF(CSD2_ADDR)
+#define CSD3 LONG_REF(CSD3_ADDR)
+
+#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSD_WAIT_SHIFT 0
+#define CSD_RO 0x00000008 /* Read-Only */
+#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
+#define CSD_AM_SHIFT 4
+#define CSD_BUSW 0x00010000 /* Bus Width Select */
+#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
+#define CSD_AC_SHIFT 20
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register
+ */
+#define PLLCR_ADDR 0xfffff200
+#define PLLCR WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL 0x0008 /* Disable PLL */
+#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
+#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
+#define PLLCR_PIXCLK_SEL_SHIFT 11
+
+/* 'EZ328-compatible definitions */
+#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK
+#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR 0xfffff202
+#define PLLFSR WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK 0x00ff /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT 0x4000 /* Protect P & Q */
+#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR 0xfffff207
+#define PCTRL BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT 0
+#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */
+#define PCTRL_PCEN 0x80 /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/*
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR 0xfffff300
+#define IVR BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADRR 0xfffff302
+#define ICR WORD_REF(ICR_ADDR)
+
+#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
+#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
+#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
+#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR 0xfffff304
+#define IMR LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */
+#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */
+#define UART_IRQ_NUM 2 /* UART interrupt */
+#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM 4 /* RTC interrupt */
+#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
+#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
+#define INT0_IRQ_NUM 8 /* External INT0 */
+#define INT1_IRQ_NUM 9 /* External INT1 */
+#define INT2_IRQ_NUM 10 /* External INT2 */
+#define INT3_IRQ_NUM 11 /* External INT3 */
+#define INT4_IRQ_NUM 12 /* External INT4 */
+#define INT5_IRQ_NUM 13 /* External INT5 */
+#define INT6_IRQ_NUM 14 /* External INT6 */
+#define INT7_IRQ_NUM 15 /* External INT7 */
+#define IRQ1_IRQ_NUM 16 /* IRQ1 */
+#define IRQ2_IRQ_NUM 17 /* IRQ2 */
+#define IRQ3_IRQ_NUM 18 /* IRQ3 */
+#define IRQ6_IRQ_NUM 19 /* IRQ6 */
+#define PEN_IRQ_NUM 20 /* Pen Interrupt */
+#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */
+#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */
+#define IRQ7_IRQ_NUM 23 /* IRQ7 */
+
+/* '328-compatible definitions */
+#define SPI_IRQ_NUM SPIM_IRQ_NUM
+#define TMR_IRQ_NUM TMR1_IRQ_NUM
+
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
+#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
+#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
+#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
+#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
+#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
+#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
+#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
+#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
+#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */
+#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */
+#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */
+#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */
+#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
+#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
+#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
+#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
+#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */
+#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */
+#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */
+#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IMR_MSPI IMR_MSPIM
+#define IMR_MTMR IMR_MTMR1
+
+/*
+ * Interrupt Wake-Up Enable Register
+ */
+#define IWR_ADDR 0xfffff308
+#define IWR LONG_REF(IWR_ADDR)
+
+#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
+#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
+#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
+#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
+#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
+#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
+#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
+#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
+#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
+#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
+
+/*
+ * Interrupt Status Register
+ */
+#define ISR_ADDR 0xfffff30c
+#define ISR LONG_REF(ISR_ADDR)
+
+#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
+#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
+#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
+#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
+#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
+#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
+#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
+#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
+#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
+#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define ISR_SPI ISR_SPIM
+#define ISR_TMR ISR_TMR1
+
+/*
+ * Interrupt Pending Register
+ */
+#define IPR_ADDR 0xfffff310
+#define IPR LONG_REF(IPR_ADDR)
+
+#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
+#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
+#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
+#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
+#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
+#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
+#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
+#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
+#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
+#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IPR_SPI IPR_SPIM
+#define IPR_TMR IPR_TMR1
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
+#define PADATA_ADDR 0xfffff401 /* Port A data register */
+#define PASEL_ADDR 0xfffff403 /* Port A Select register */
+
+#define PADIR BYTE_REF(PADIR_ADDR)
+#define PADATA BYTE_REF(PADATA_ADDR)
+#define PASEL BYTE_REF(PASEL_ADDR)
+
+#define PA(x) (1 << (x))
+#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */
+
+#define PA_A16 PA(0) /* Use A16 as PA(0) */
+#define PA_A17 PA(1) /* Use A17 as PA(1) */
+#define PA_A18 PA(2) /* Use A18 as PA(2) */
+#define PA_A19 PA(3) /* Use A19 as PA(3) */
+#define PA_A20 PA(4) /* Use A20 as PA(4) */
+#define PA_A21 PA(5) /* Use A21 as PA(5) */
+#define PA_A22 PA(6) /* Use A22 as PA(6) */
+#define PA_A23 PA(7) /* Use A23 as PA(7) */
+
+/*
+ * Port B
+ */
+#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
+#define PBDATA_ADDR 0xfffff409 /* Port B data register */
+#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
+
+#define PBDIR BYTE_REF(PBDIR_ADDR)
+#define PBDATA BYTE_REF(PBDATA_ADDR)
+#define PBSEL BYTE_REF(PBSEL_ADDR)
+
+#define PB(x) (1 << (x))
+#define PB_D(x) PB(x) /* This is specific to port B only */
+
+#define PB_D0 PB(0) /* Use D0 as PB(0) */
+#define PB_D1 PB(1) /* Use D1 as PB(1) */
+#define PB_D2 PB(2) /* Use D2 as PB(2) */
+#define PB_D3 PB(3) /* Use D3 as PB(3) */
+#define PB_D4 PB(4) /* Use D4 as PB(4) */
+#define PB_D5 PB(5) /* Use D5 as PB(5) */
+#define PB_D6 PB(6) /* Use D6 as PB(6) */
+#define PB_D7 PB(7) /* Use D7 as PB(7) */
+
+/*
+ * Port C
+ */
+#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
+#define PCDATA_ADDR 0xfffff411 /* Port C data register */
+#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
+
+#define PCDIR BYTE_REF(PCDIR_ADDR)
+#define PCDATA BYTE_REF(PCDATA_ADDR)
+#define PCSEL BYTE_REF(PCSEL_ADDR)
+
+#define PC(x) (1 << (x))
+
+#define PC_WE PC(6) /* Use WE as PC(6) */
+#define PC_DTACK PC(5) /* Use DTACK as PC(5) */
+#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */
+#define PC_LDS PC(2) /* Use LDS as PC(2) */
+#define PC_UDS PC(1) /* Use UDS as PC(1) */
+#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */
+
+/*
+ * Port D
+ */
+#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
+#define PDDATA_ADDR 0xfffff419 /* Port D data register */
+#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
+#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
+#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
+#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
+
+#define PDDIR BYTE_REF(PDDIR_ADDR)
+#define PDDATA BYTE_REF(PDDATA_ADDR)
+#define PDPUEN BYTE_REF(PDPUEN_ADDR)
+#define PDPOL BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
+#define PDIQEG BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x) (1 << (x))
+#define PD_KB(x) PD(x) /* This is specific for Port D only */
+
+#define PD_KB0 PD(0) /* Use KB0 as PD(0) */
+#define PD_KB1 PD(1) /* Use KB1 as PD(1) */
+#define PD_KB2 PD(2) /* Use KB2 as PD(2) */
+#define PD_KB3 PD(3) /* Use KB3 as PD(3) */
+#define PD_KB4 PD(4) /* Use KB4 as PD(4) */
+#define PD_KB5 PD(5) /* Use KB5 as PD(5) */
+#define PD_KB6 PD(6) /* Use KB6 as PD(6) */
+#define PD_KB7 PD(7) /* Use KB7 as PD(7) */
+
+/*
+ * Port E
+ */
+#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
+#define PEDATA_ADDR 0xfffff421 /* Port E data register */
+#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
+#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
+
+#define PEDIR BYTE_REF(PEDIR_ADDR)
+#define PEDATA BYTE_REF(PEDATA_ADDR)
+#define PEPUEN BYTE_REF(PEPUEN_ADDR)
+#define PESEL BYTE_REF(PESEL_ADDR)
+
+#define PE(x) (1 << (x))
+
+#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */
+#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */
+#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */
+#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */
+#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */
+#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */
+#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */
+
+/*
+ * Port F
+ */
+#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
+#define PFDATA_ADDR 0xfffff429 /* Port F data register */
+#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
+
+#define PFDIR BYTE_REF(PFDIR_ADDR)
+#define PFDATA BYTE_REF(PFDATA_ADDR)
+#define PFPUEN BYTE_REF(PFPUEN_ADDR)
+#define PFSEL BYTE_REF(PFSEL_ADDR)
+
+#define PF(x) (1 << (x))
+#define PF_A(x) PF((x) - 24) /* This is Port F specific only */
+
+#define PF_A24 PF(0) /* Use A24 as PF(0) */
+#define PF_A25 PF(1) /* Use A25 as PF(1) */
+#define PF_A26 PF(2) /* Use A26 as PF(2) */
+#define PF_A27 PF(3) /* Use A27 as PF(3) */
+#define PF_A28 PF(4) /* Use A28 as PF(4) */
+#define PF_A29 PF(5) /* Use A29 as PF(5) */
+#define PF_A30 PF(6) /* Use A30 as PF(6) */
+#define PF_A31 PF(7) /* Use A31 as PF(7) */
+
+/*
+ * Port G
+ */
+#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
+#define PGDATA_ADDR 0xfffff431 /* Port G data register */
+#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
+
+#define PGDIR BYTE_REF(PGDIR_ADDR)
+#define PGDATA BYTE_REF(PGDATA_ADDR)
+#define PGPUEN BYTE_REF(PGPUEN_ADDR)
+#define PGSEL BYTE_REF(PGSEL_ADDR)
+
+#define PG(x) (1 << (x))
+
+#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */
+#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */
+#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */
+#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */
+#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */
+#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */
+#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */
+#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */
+
+/*
+ * Port J
+ */
+#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
+#define PJDATA_ADDR 0xfffff439 /* Port J data register */
+#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */
+
+#define PJDIR BYTE_REF(PJDIR_ADDR)
+#define PJDATA BYTE_REF(PJDATA_ADDR)
+#define PJSEL BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x) (1 << (x))
+
+#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
+#define PKDATA_ADDR 0xfffff441 /* Port K data register */
+#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */
+#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
+
+#define PKDIR BYTE_REF(PKDIR_ADDR)
+#define PKDATA BYTE_REF(PKDATA_ADDR)
+#define PKPUEN BYTE_REF(PKPUEN_ADDR)
+#define PKSEL BYTE_REF(PKSEL_ADDR)
+
+#define PK(x) (1 << (x))
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */
+#define PMDATA_ADDR 0xfffff439 /* Port M data register */
+#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */
+#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */
+
+#define PMDIR BYTE_REF(PMDIR_ADDR)
+#define PMDATA BYTE_REF(PMDATA_ADDR)
+#define PMPUEN BYTE_REF(PMPUEN_ADDR)
+#define PMSEL BYTE_REF(PMSEL_ADDR)
+
+#define PM(x) (1 << (x))
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR 0xfffff500
+#define PWMC WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT 0
+#define PWMC_PWMEN 0x0010 /* Enable PWM */
+#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */
+#define PWMC_PIN 0x0080 /* Current PWM output pin status */
+#define PWMC_LOAD 0x0100 /* Force a new period */
+#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */
+#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
+
+/* 'EZ328-compatible definitions */
+#define PWMC_EN PWMC_PWMEN
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR 0xfffff502
+#define PWMP WORD_REF(PWMP_ADDR)
+
+/*
+ * PWM Width Register
+ */
+#define PWMW_ADDR 0xfffff504
+#define PWMW WORD_REF(PWMW_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR 0xfffff506
+#define PWMCNT WORD_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timers
+ *
+ **********/
+
+/*
+ * Timer Unit 1 and 2 Control Registers
+ */
+#define TCTL1_ADDR 0xfffff600
+#define TCTL1 WORD_REF(TCTL1_ADDR)
+#define TCTL2_ADDR 0xfffff60c
+#define TCTL2 WORD_REF(TCTL2_ADDR)
+
+#define TCTL_TEN 0x0001 /* Timer Enable */
+#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
+#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
+#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
+#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
+#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
+#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
+#define TCTL_IRQEN 0x0010 /* IRQ Enable */
+#define TCTL_OM 0x0020 /* Output Mode */
+#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
+#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
+#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
+#define TCTL_FRR 0x0010 /* Free-Run Mode */
+
+/* 'EZ328-compatible definitions */
+#define TCTL_ADDR TCTL1_ADDR
+#define TCTL TCTL1
+
+/*
+ * Timer Unit 1 and 2 Prescaler Registers
+ */
+#define TPRER1_ADDR 0xfffff602
+#define TPRER1 WORD_REF(TPRER1_ADDR)
+#define TPRER2_ADDR 0xfffff60e
+#define TPRER2 WORD_REF(TPRER2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TPRER_ADDR TPRER1_ADDR
+#define TPRER TPRER1
+
+/*
+ * Timer Unit 1 and 2 Compare Registers
+ */
+#define TCMP1_ADDR 0xfffff604
+#define TCMP1 WORD_REF(TCMP1_ADDR)
+#define TCMP2_ADDR 0xfffff610
+#define TCMP2 WORD_REF(TCMP2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCMP_ADDR TCMP1_ADDR
+#define TCMP TCMP1
+
+/*
+ * Timer Unit 1 and 2 Capture Registers
+ */
+#define TCR1_ADDR 0xfffff606
+#define TCR1 WORD_REF(TCR1_ADDR)
+#define TCR2_ADDR 0xfffff612
+#define TCR2 WORD_REF(TCR2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCR_ADDR TCR1_ADDR
+#define TCR TCR1
+
+/*
+ * Timer Unit 1 and 2 Counter Registers
+ */
+#define TCN1_ADDR 0xfffff608
+#define TCN1 WORD_REF(TCN1_ADDR)
+#define TCN2_ADDR 0xfffff614
+#define TCN2 WORD_REF(TCN2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCN_ADDR TCN1_ADDR
+#define TCN TCN
+
+/*
+ * Timer Unit 1 and 2 Status Registers
+ */
+#define TSTAT1_ADDR 0xfffff60a
+#define TSTAT1 WORD_REF(TSTAT1_ADDR)
+#define TSTAT2_ADDR 0xfffff616
+#define TSTAT2 WORD_REF(TSTAT2_ADDR)
+
+#define TSTAT_COMP 0x0001 /* Compare Event occurred */
+#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
+
+/* 'EZ328-compatible definitions */
+#define TSTAT_ADDR TSTAT1_ADDR
+#define TSTAT TSTAT1
+
+/*
+ * Watchdog Compare Register
+ */
+#define WRR_ADDR 0xfffff61a
+#define WRR WORD_REF(WRR_ADDR)
+
+/*
+ * Watchdog Counter Register
+ */
+#define WCN_ADDR 0xfffff61c
+#define WCN WORD_REF(WCN_ADDR)
+
+/*
+ * Watchdog Control and Status Register
+ */
+#define WCSR_ADDR 0xfffff618
+#define WCSR WORD_REF(WCSR_ADDR)
+
+#define WCSR_WDEN 0x0001 /* Watchdog Enable */
+#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/
+#define WCSR_WRST 0x0004 /* Watchdog Reset */
+
+/**********
+ *
+ * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ *
+ **********/
+
+/*
+ * SPI Slave Register
+ */
+#define SPISR_ADDR 0xfffff700
+#define SPISR WORD_REF(SPISR_ADDR)
+
+#define SPISR_DATA_ADDR 0xfffff701
+#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR)
+
+#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */
+#define SPISR_DATA_SHIFT 0
+#define SPISR_SPISEN 0x0100 /* SPIS module enable */
+#define SPISR_POL 0x0200 /* SPSCLK polarity control */
+#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */
+#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */
+#define SPISR_DATARDY 0x1000 /* Data ready */
+#define SPISR_ENPOL 0x2000 /* Enable Polarity */
+#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */
+#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR 0xfffff800
+#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR 0xfffff802
+#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
+#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH 0x0100 /* Exchange */
+#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* 'EZ328-compatible definitions */
+#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ
+#define SPIMCONT_ENABLE SPIMCONT_SPIMEN
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR 0xfffff900
+#define USTCNT WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */
+#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */
+#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */
+#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */
+#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */
+#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */
+#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
+#define USTCNT_STOP 0x0200 /* Stop bit transmission */
+#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */
+#define USTCNT_PARITYEN 0x0800 /* Parity Enable */
+#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */
+#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
+#define USTCNT_RXEN 0x4000 /* Receiver Enable */
+#define USTCNT_UARTEN 0x8000 /* UART Enable */
+
+/* 'EZ328-compatible definitions */
+#define USTCNT_TXAE USTCNT_TXAVAILEN
+#define USTCNT_TXHE USTCNT_TXHALFEN
+#define USTCNT_TXEE USTCNT_TXEMPTYEN
+#define USTCNT_RXRE USTCNT_RXREADYEN
+#define USTCNT_RXHE USTCNT_RXHALFEN
+#define USTCNT_RXFE USTCNT_RXFULLEN
+#define USTCNT_CTSD USTCNT_CTSDELTAEN
+#define USTCNT_ODD USTCNT_ODD_EVEN
+#define USTCNT_PEN USTCNT_PARITYEN
+#define USTCNT_CLKM USTCNT_CLKMODE
+#define USTCNT_UEN USTCNT_UARTEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR 0xfffff902
+#define UBAUD WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT 0
+#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT 8
+#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
+#define UBAUD_GPIOSRC 0x1000 /* GPIO source */
+#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */
+#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */
+#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */
+
+/*
+ * UART Receiver Register
+ */
+#define URX_ADDR 0xfffff904
+#define URX WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK 0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK 0x0200 /* Break Detected */
+#define URX_FRAME_ERROR 0x0400 /* Framing Error */
+#define URX_OVRUN 0x0800 /* Serial Overrun */
+#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register
+ */
+#define UTX_ADDR 0xfffff906
+#define UTX WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA 0x0100 /* CTS changed */
+#define UTX_CTS_STATUS 0x0200 /* CTS State */
+#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
+
+/* 'EZ328-compatible definitions */
+#define UTX_CTS_STAT UTX_CTS_STATUS
+#define UTX_NOCTS UTX_IGNORE_CTS
+
+/*
+ * UART Miscellaneous Register
+ */
+#define UMISC_ADDR 0xfffff908
+#define UMISC WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL 0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
+#define UMISC_RTS 0x0040 /* Set RTS status */
+#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
+#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC 0x4000 /* Clock Source */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+ volatile unsigned short int ustcnt;
+ volatile unsigned short int ubaud;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char rxdata;
+ } b;
+ } urx;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char txdata;
+ } b;
+ } utx;
+ volatile unsigned short int umisc;
+ volatile unsigned short int pad1;
+ volatile unsigned short int pad2;
+ volatile unsigned short int pad3;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register
+ */
+#define LSSA_ADDR 0xfffffa00
+#define LSSA LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */
+
+/*
+ * LCD Virtual Page Width Register
+ */
+#define LVPW_ADDR 0xfffffa05
+#define LVPW BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with 'EZ328 !!!)
+ */
+#define LXMAX_ADDR 0xfffffa08
+#define LXMAX WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR 0xfffffa0a
+#define LYMAX WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR 0xfffffa18
+#define LCXP WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK 0xc000 /* Cursor Control */
+#define LCXP_CC_TRAMSPARENT 0x0000
+#define LCXP_CC_BLACK 0x4000
+#define LCXP_CC_REVERSED 0x8000
+#define LCXP_CC_WHITE 0xc000
+#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR 0xfffffa1a
+#define LCYP WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR 0xfffffa1c
+#define LCWCH WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK 0x001f /* Cursor Height */
+#define LCWCH_CH_SHIFT 0
+#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
+#define LCWCH_CW_SHIFT 8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR 0xfffffa1f
+#define LBLKC BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
+#define LBLKC_BD_SHIFT 0
+#define LBLKC_BKEN 0x80 /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register
+ */
+#define LPICF_ADDR 0xfffffa20
+#define LPICF BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */
+#define LPICF_GS_BW 0x00
+#define LPICF_GS_GRAY_4 0x01
+#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */
+#define LPICF_PBSIZ_1 0x00
+#define LPICF_PBSIZ_2 0x02
+#define LPICF_PBSIZ_4 0x04
+
+/*
+ * LCD Polarity Configuration Register
+ */
+#define LPOLCF_ADDR 0xfffffa21
+#define LPOLCF BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
+#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR 0xfffffa23
+#define LACDRC BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR 0xfffffa25
+#define LPXCD BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR 0xfffffa27
+#define LCKCON BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */
+#define LCKCON_DWIDTH 0x02 /* Display Memory Width */
+#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 2
+#define LCKCON_DMA16 0x40 /* DMA burst length */
+#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
+
+/* 'EZ328-compatible definitions */
+#define LCKCON_DW_MASK LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Last Buffer Address Register
+ */
+#define LLBAR_ADDR 0xfffffa29
+#define LLBAR BYTE_REF(LLBAR_ADDR)
+
+#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */
+#define LLBAR_LBAR_SHIFT 0
+
+/*
+ * LCD Octet Terminal Count Register
+ */
+#define LOTCR_ADDR 0xfffffa2b
+#define LOTCR BYTE_REF(LOTCR_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR 0xfffffa2d
+#define LPOSR BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */
+#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR 0xfffffa31
+#define LFRCM BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR 0xfffffa32
+#define LGPMR WORD_REF(LGPMR_ADDR)
+
+#define LGPMR_GLEVEL3_MASK 0x000f
+#define LGPMR_GLEVEL3_SHIFT 0
+#define LGPMR_GLEVEL2_MASK 0x00f0
+#define LGPMR_GLEVEL2_SHIFT 4
+#define LGPMR_GLEVEL0_MASK 0x0f00
+#define LGPMR_GLEVEL0_SHIFT 8
+#define LGPMR_GLEVEL1_MASK 0xf000
+#define LGPMR_GLEVEL1_SHIFT 12
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR 0xfffffb00
+#define RTCTIME LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCTIME_SECONDS_SHIFT 0
+#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCTIME_MINUTES_SHIFT 16
+#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCTIME_HOURS_SHIFT 24
+
+/*
+ * RTC Alarm Register
+ */
+#define RTCALRM_ADDR 0xfffffb04
+#define RTCALRM LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCALRM_SECONDS_SHIFT 0
+#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCALRM_MINUTES_SHIFT 16
+#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCALRM_HOURS_SHIFT 24
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR 0xfffffb0c
+#define RTCCTL WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_384 0x0020 /* Crystal Selection */
+#define RTCCTL_ENABLE 0x0080 /* RTC Enable */
+
+/* 'EZ328-compatible definitions */
+#define RTCCTL_XTL RTCCTL_384
+#define RTCCTL_EN RTCCTL_ENABLE
+
+/*
+ * RTC Interrupt Status Register
+ */
+#define RTCISR_ADDR 0xfffffb0e
+#define RTCISR WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW 0x0001 /* Stopwatch timed out */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR 0xfffffb10
+#define RTCIENR WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
+#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
+#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
+#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
+
+/*
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR 0xfffffb12
+#define STPWCH WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+#endif /* _MC68328_H_ */
--- /dev/null
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR 0xfffa11
+#define PORTE BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR 0xfffa15
+#define DDRE BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR 0xfffa17
+#define PEPAR BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR 0xfffa19
+#define PORTF BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR 0xfffa1d
+#define DDRF BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR 0xfffa1f
+#define PFPAR BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR 0xfffc15
+#define PORTQS BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR 0xfffc17
+#define DDRQS BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR 0xfffc16
+#define PQSPAR BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC 0x0000
+#define CSOR_MODE_SYNC 0x8000
+#define CSOR_MODE_MASK 0x8000
+#define CSOR_BYTE_DISABLE 0x0000
+#define CSOR_BYTE_UPPER 0x4000
+#define CSOR_BYTE_LOWER 0x2000
+#define CSOR_BYTE_BOTH 0x6000
+#define CSOR_BYTE_MASK 0x6000
+#define CSOR_RW_RSVD 0x0000
+#define CSOR_RW_READ 0x0800
+#define CSOR_RW_WRITE 0x1000
+#define CSOR_RW_BOTH 0x1800
+#define CSOR_RW_MASK 0x1800
+#define CSOR_STROBE_DS 0x0400
+#define CSOR_STROBE_AS 0x0000
+#define CSOR_STROBE_MASK 0x0400
+#define CSOR_DSACK_WAIT(x) (wait << 6)
+#define CSOR_DSACK_FTERM (14 << 6)
+#define CSOR_DSACK_EXTERNAL (15 << 6)
+#define CSOR_DSACK_MASK 0x03c0
+#define CSOR_SPACE_CPU 0x0000
+#define CSOR_SPACE_USER 0x0010
+#define CSOR_SPACE_SU 0x0020
+#define CSOR_SPACE_BOTH 0x0030
+#define CSOR_SPACE_MASK 0x0030
+#define CSOR_IPL_ALL 0x0000
+#define CSOR_IPL_PRIORITY(x) (x << 1)
+#define CSOR_IPL_MASK 0x000e
+#define CSOR_AVEC_ON 0x0001
+#define CSOR_AVEC_OFF 0x0000
+#define CSOR_AVEC_MASK 0x0001
+
+#define CSBAR_ADDR(x) ((addr >> 11) << 3)
+#define CSBAR_ADDR_MASK 0xfff8
+#define CSBAR_BLKSIZE_2K 0x0000
+#define CSBAR_BLKSIZE_8K 0x0001
+#define CSBAR_BLKSIZE_16K 0x0002
+#define CSBAR_BLKSIZE_64K 0x0003
+#define CSBAR_BLKSIZE_128K 0x0004
+#define CSBAR_BLKSIZE_256K 0x0005
+#define CSBAR_BLKSIZE_512K 0x0006
+#define CSBAR_BLKSIZE_1M 0x0007
+#define CSBAR_BLKSIZE_MASK 0x0007
+
+#define CSPAR_DISC 0
+#define CSPAR_ALT 1
+#define CSPAR_CS8 2
+#define CSPAR_CS16 3
+#define CSPAR_MASK 3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x) (x << 2)
+#define CSPAR0_CS1(x) (x << 4)
+#define CSPAR0_CS2(x) (x << 6)
+#define CSPAR0_CS3(x) (x << 8)
+#define CSPAR0_CS4(x) (x << 10)
+#define CSPAR0_CS5(x) (x << 12)
+
+#define CSPAR1_CS6(x) (x << 0)
+#define CSPAR1_CS7(x) (x << 2)
+#define CSPAR1_CS8(x) (x << 4)
+#define CSPAR1_CS9(x) (x << 6)
+#define CSPAR1_CS10(x) (x << 8)
+
+#endif
--- /dev/null
+
+/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
+ *
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ *
+ */
+
+#ifndef _MC68EZ328_H_
+#define _MC68EZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/**********
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR 0xfffff000
+#define SCR BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
+#define SCR_DMAP 0x04 /* Double Map */
+#define SCR_SO 0x08 /* Supervisor Only */
+#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
+#define SCR_PRV 0x20 /* Privilege Violation */
+#define SCR_WPV 0x40 /* Write Protect Violation */
+#define SCR_BETO 0x80 /* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR LONG_REF(MRR_ADDR)
+
+/**********
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/*
+ * Chip Select Group Base Registers
+ */
+#define CSGBA_ADDR 0xfffff100
+#define CSGBB_ADDR 0xfffff102
+
+#define CSGBC_ADDR 0xfffff104
+#define CSGBD_ADDR 0xfffff106
+
+#define CSGBA WORD_REF(CSGBA_ADDR)
+#define CSGBB WORD_REF(CSGBB_ADDR)
+#define CSGBC WORD_REF(CSGBC_ADDR)
+#define CSGBD WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers
+ */
+#define CSA_ADDR 0xfffff110
+#define CSB_ADDR 0xfffff112
+#define CSC_ADDR 0xfffff114
+#define CSD_ADDR 0xfffff116
+
+#define CSA WORD_REF(CSA_ADDR)
+#define CSB WORD_REF(CSB_ADDR)
+#define CSC WORD_REF(CSC_ADDR)
+#define CSD WORD_REF(CSD_ADDR)
+
+#define CSA_EN 0x0001 /* Chip-Select Enable */
+#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSA_SIZ_SHIFT 1
+#define CSA_WS_MASK 0x0070 /* Wait State */
+#define CSA_WS_SHIFT 4
+#define CSA_BSW 0x0080 /* Data Bus Width */
+#define CSA_FLASH 0x0100 /* FLASH Memory Support */
+#define CSA_RO 0x8000 /* Read-Only */
+
+#define CSB_EN 0x0001 /* Chip-Select Enable */
+#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSB_SIZ_SHIFT 1
+#define CSB_WS_MASK 0x0070 /* Wait State */
+#define CSB_WS_SHIFT 4
+#define CSB_BSW 0x0080 /* Data Bus Width */
+#define CSB_FLASH 0x0100 /* FLASH Memory Support */
+#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP 0x2000 /* Readonly if protected */
+#define CSB_SOP 0x4000 /* Supervisor only if protected */
+#define CSB_RO 0x8000 /* Read-Only */
+
+#define CSC_EN 0x0001 /* Chip-Select Enable */
+#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSC_SIZ_SHIFT 1
+#define CSC_WS_MASK 0x0070 /* Wait State */
+#define CSC_WS_SHIFT 4
+#define CSC_BSW 0x0080 /* Data Bus Width */
+#define CSC_FLASH 0x0100 /* FLASH Memory Support */
+#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP 0x2000 /* Readonly if protected */
+#define CSC_SOP 0x4000 /* Supervisor only if protected */
+#define CSC_RO 0x8000 /* Read-Only */
+
+#define CSD_EN 0x0001 /* Chip-Select Enable */
+#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSD_SIZ_SHIFT 1
+#define CSD_WS_MASK 0x0070 /* Wait State */
+#define CSD_WS_SHIFT 4
+#define CSD_BSW 0x0080 /* Data Bus Width */
+#define CSD_FLASH 0x0100 /* FLASH Memory Support */
+#define CSD_DRAM 0x0200 /* Dram Selection */
+#define CSD_COMB 0x0400 /* Combining */
+#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP 0x2000 /* Readonly if protected */
+#define CSD_SOP 0x4000 /* Supervisor only if protected */
+#define CSD_RO 0x8000 /* Read-Only */
+
+/*
+ * Emulation Chip-Select Register
+ */
+#define EMUCS_ADDR 0xfffff118
+#define EMUCS WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK 0x0070
+#define EMUCS_WS_SHIFT 4
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register
+ */
+#define PLLCR_ADDR 0xfffff200
+#define PLLCR WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL 0x0008 /* Disable PLL */
+#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
+#define PLLCR_PRESC 0x0020 /* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR 0xfffff202
+#define PLLFSR WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK 0x00ff /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT 0x4000 /* Protect P & Q */
+#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR 0xfffff207
+#define PCTRL BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT 0
+#define PCTRL_PCEN 0x80 /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/*
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR 0xfffff300
+#define IVR BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR 0xfffff302
+#define ICR WORD_REF(ICR_ADDR)
+
+#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
+#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
+#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
+#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
+#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR 0xfffff304
+#define IMR LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPI_IRQ_NUM 0 /* SPI interrupt */
+#define TMR_IRQ_NUM 1 /* Timer interrupt */
+#define UART_IRQ_NUM 2 /* UART interrupt */
+#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM 4 /* RTC interrupt */
+#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
+#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
+#define INT0_IRQ_NUM 8 /* External INT0 */
+#define INT1_IRQ_NUM 9 /* External INT1 */
+#define INT2_IRQ_NUM 10 /* External INT2 */
+#define INT3_IRQ_NUM 11 /* External INT3 */
+#define IRQ1_IRQ_NUM 16 /* IRQ1 */
+#define IRQ2_IRQ_NUM 17 /* IRQ2 */
+#define IRQ3_IRQ_NUM 18 /* IRQ3 */
+#define IRQ6_IRQ_NUM 19 /* IRQ6 */
+#define IRQ5_IRQ_NUM 20 /* IRQ5 */
+#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM SPI_IRQ_NUM
+#define TMR1_IRQ_NUM TMR_IRQ_NUM
+
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
+#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
+#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
+#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
+#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
+#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
+#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
+#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
+#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
+#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
+#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
+#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
+#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
+#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
+#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM IMR_MSPI
+#define IMR_MTMR1 IMR_MTMR
+
+/*
+ * Interrupt Status Register
+ */
+#define ISR_ADDR 0xfffff30c
+#define ISR LONG_REF(ISR_ADDR)
+
+#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM ISR_SPI
+#define ISR_TMR1 ISR_TMR
+
+/*
+ * Interrupt Pending Register
+ */
+#define IPR_ADDR 0xfffff30c
+#define IPR LONG_REF(IPR_ADDR)
+
+#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM IPR_SPI
+#define IPR_TMR1 IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
+#define PADATA_ADDR 0xfffff401 /* Port A data register */
+#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
+
+#define PADIR BYTE_REF(PADIR_ADDR)
+#define PADATA BYTE_REF(PADATA_ADDR)
+#define PAPUEN BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x) (1 << (x))
+
+/*
+ * Port B
+ */
+#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
+#define PBDATA_ADDR 0xfffff409 /* Port B data register */
+#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
+#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
+
+#define PBDIR BYTE_REF(PBDIR_ADDR)
+#define PBDATA BYTE_REF(PBDATA_ADDR)
+#define PBPUEN BYTE_REF(PBPUEN_ADDR)
+#define PBSEL BYTE_REF(PBSEL_ADDR)
+
+#define PB(x) (1 << (x))
+
+#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
+#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
+#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
+#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
+#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
+#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
+#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
+
+/*
+ * Port C
+ */
+#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
+#define PCDATA_ADDR 0xfffff411 /* Port C data register */
+#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
+
+#define PCDIR BYTE_REF(PCDIR_ADDR)
+#define PCDATA BYTE_REF(PCDATA_ADDR)
+#define PCPDEN BYTE_REF(PCPDEN_ADDR)
+#define PCSEL BYTE_REF(PCSEL_ADDR)
+
+#define PC(x) (1 << (x))
+
+#define PC_LD0 0x01 /* Use LD0 as PC[0] */
+#define PC_LD1 0x02 /* Use LD1 as PC[1] */
+#define PC_LD2 0x04 /* Use LD2 as PC[2] */
+#define PC_LD3 0x08 /* Use LD3 as PC[3] */
+#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
+#define PC_LLP 0x20 /* Use LLP as PC[5] */
+#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
+#define PC_LACD 0x80 /* Use LACD as PC[7] */
+
+/*
+ * Port D
+ */
+#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
+#define PDDATA_ADDR 0xfffff419 /* Port D data register */
+#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
+#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
+#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
+#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
+#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
+#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
+
+#define PDDIR BYTE_REF(PDDIR_ADDR)
+#define PDDATA BYTE_REF(PDDATA_ADDR)
+#define PDPUEN BYTE_REF(PDPUEN_ADDR)
+#define PDSEL BYTE_REF(PDSEL_ADDR)
+#define PDPOL BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x) (1 << (x))
+
+#define PD_INT0 0x01 /* Use INT0 as PD[0] */
+#define PD_INT1 0x02 /* Use INT1 as PD[1] */
+#define PD_INT2 0x04 /* Use INT2 as PD[2] */
+#define PD_INT3 0x08 /* Use INT3 as PD[3] */
+#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
+#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
+#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
+#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
+
+/*
+ * Port E
+ */
+#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
+#define PEDATA_ADDR 0xfffff421 /* Port E data register */
+#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
+#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
+
+#define PEDIR BYTE_REF(PEDIR_ADDR)
+#define PEDATA BYTE_REF(PEDATA_ADDR)
+#define PEPUEN BYTE_REF(PEPUEN_ADDR)
+#define PESEL BYTE_REF(PESEL_ADDR)
+
+#define PE(x) (1 << (x))
+
+#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
+#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
+#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
+#define PE_DWE 0x08 /* Use DWE as PE[3] */
+#define PE_RXD 0x10 /* Use RXD as PE[4] */
+#define PE_TXD 0x20 /* Use TXD as PE[5] */
+#define PE_RTS 0x40 /* Use RTS as PE[6] */
+#define PE_CTS 0x80 /* Use CTS as PE[7] */
+
+/*
+ * Port F
+ */
+#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
+#define PFDATA_ADDR 0xfffff429 /* Port F data register */
+#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
+
+#define PFDIR BYTE_REF(PFDIR_ADDR)
+#define PFDATA BYTE_REF(PFDATA_ADDR)
+#define PFPUEN BYTE_REF(PFPUEN_ADDR)
+#define PFSEL BYTE_REF(PFSEL_ADDR)
+
+#define PF(x) (1 << (x))
+
+#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
+#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
+#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
+#define PF_A20 0x08 /* Use A20 as PF[3] */
+#define PF_A21 0x10 /* Use A21 as PF[4] */
+#define PF_A22 0x20 /* Use A22 as PF[5] */
+#define PF_A23 0x40 /* Use A23 as PF[6] */
+#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
+
+/*
+ * Port G
+ */
+#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
+#define PGDATA_ADDR 0xfffff431 /* Port G data register */
+#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
+
+#define PGDIR BYTE_REF(PGDIR_ADDR)
+#define PGDATA BYTE_REF(PGDATA_ADDR)
+#define PGPUEN BYTE_REF(PGPUEN_ADDR)
+#define PGSEL BYTE_REF(PGSEL_ADDR)
+
+#define PG(x) (1 << (x))
+
+#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
+#define PG_A0 0x02 /* Use A0 as PG[1] */
+#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
+#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
+#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
+#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR 0xfffff500
+#define PWMC WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT 0
+#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
+#define PWMC_REPEAT_SHIFT 2
+#define PWMC_EN 0x0010 /* Enable PWM */
+#define PMNC_FIFOAV 0x0020 /* FIFO Available */
+#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
+#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT 8
+#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN PWMC_EN
+
+/*
+ * PWM Sample Register
+ */
+#define PWMS_ADDR 0xfffff502
+#define PWMS WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR 0xfffff504
+#define PWMP BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR 0xfffff505
+#define PWMCNT BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/*
+ * Timer Control register
+ */
+#define TCTL_ADDR 0xfffff600
+#define TCTL WORD_REF(TCTL_ADDR)
+
+#define TCTL_TEN 0x0001 /* Timer Enable */
+#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
+#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
+#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
+#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
+#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
+#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
+#define TCTL_IRQEN 0x0010 /* IRQ Enable */
+#define TCTL_OM 0x0020 /* Output Mode */
+#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
+#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
+#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
+#define TCTL_FRR 0x0010 /* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR TCTL_ADDR
+#define TCTL1 TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR 0xfffff602
+#define TPRER WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR TPRER_ADDR
+#define TPRER1 TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR 0xfffff604
+#define TCMP WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR TCMP_ADDR
+#define TCMP1 TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR 0xfffff606
+#define TCR WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR TCR_ADDR
+#define TCR1 TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR 0xfffff608
+#define TCN WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR TCN_ADDR
+#define TCN1 TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR 0xfffff60a
+#define TSTAT WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP 0x0001 /* Compare Event occurred */
+#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR TSTAT_ADDR
+#define TSTAT1 TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR 0xfffff800
+#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR 0xfffff802
+#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH 0x0100 /* Exchange */
+#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR 0xfffff900
+#define USTCNT WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
+#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
+#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
+#define USTCNT_STOP 0x0200 /* Stop bit transmission */
+#define USTCNT_ODD 0x0400 /* Odd Parity */
+#define USTCNT_PEN 0x0800 /* Parity Enable */
+#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
+#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
+#define USTCNT_RXEN 0x4000 /* Receiver Enable */
+#define USTCNT_UEN 0x8000 /* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN USTCNT_TXAE
+#define USTCNT_TXHALFEN USTCNT_TXHE
+#define USTCNT_TXEMPTYEN USTCNT_TXEE
+#define USTCNT_RXREADYEN USTCNT_RXRE
+#define USTCNT_RXHALFEN USTCNT_RXHE
+#define USTCNT_RXFULLEN USTCNT_RXFE
+#define USTCNT_CTSDELTAEN USTCNT_CTSD
+#define USTCNT_ODD_EVEN USTCNT_ODD
+#define USTCNT_PARITYEN USTCNT_PEN
+#define USTCNT_CLKMODE USTCNT_CLKM
+#define USTCNT_UARTEN USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR 0xfffff902
+#define UBAUD WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT 0
+#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT 8
+#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
+#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
+
+/*
+ * UART Receiver Register
+ */
+#define URX_ADDR 0xfffff904
+#define URX WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK 0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK 0x0200 /* Break Detected */
+#define URX_FRAME_ERROR 0x0400 /* Framing Error */
+#define URX_OVRUN 0x0800 /* Serial Overrun */
+#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
+#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register
+ */
+#define UTX_ADDR 0xfffff906
+#define UTX WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA 0x0100 /* CTS changed */
+#define UTX_CTS_STAT 0x0200 /* CTS State */
+#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
+#define UTX_NOCTS 0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS UTX_CTS_STAT
+#define UTX_IGNORE_CTS UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register
+ */
+#define UMISC_ADDR 0xfffff908
+#define UMISC WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL 0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
+#define UMISC_RTS 0x0040 /* Set RTS status */
+#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
+#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC 0x4000 /* Clock Source */
+#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
+
+/*
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR 0xfffff90a
+#define NIPR WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT 0
+#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
+#define NIPR_SELECT_SHIFT 8
+#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+ volatile unsigned short int ustcnt;
+ volatile unsigned short int ubaud;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char rxdata;
+ } b;
+ } urx;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char txdata;
+ } b;
+ } utx;
+ volatile unsigned short int umisc;
+ volatile unsigned short int nipr;
+ volatile unsigned short int pad1;
+ volatile unsigned short int pad2;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register
+ */
+#define LSSA_ADDR 0xfffffa00
+#define LSSA LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register
+ */
+#define LVPW_ADDR 0xfffffa05
+#define LVPW BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!)
+ */
+#define LXMAX_ADDR 0xfffffa08
+#define LXMAX WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR 0xfffffa0a
+#define LYMAX WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR 0xfffffa18
+#define LCXP WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK 0xc000 /* Cursor Control */
+#define LCXP_CC_TRAMSPARENT 0x0000
+#define LCXP_CC_BLACK 0x4000
+#define LCXP_CC_REVERSED 0x8000
+#define LCXP_CC_WHITE 0xc000
+#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR 0xfffffa1a
+#define LCYP WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR 0xfffffa1c
+#define LCWCH WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK 0x001f /* Cursor Height */
+#define LCWCH_CH_SHIFT 0
+#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
+#define LCWCH_CW_SHIFT 8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR 0xfffffa1f
+#define LBLKC BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
+#define LBLKC_BD_SHIFT 0
+#define LBLKC_BKEN 0x80 /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register
+ */
+#define LPICF_ADDR 0xfffffa20
+#define LPICF BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
+#define LPICF_GS_BW 0x00
+#define LPICF_GS_GRAY_4 0x01
+#define LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
+#define LPICF_PBSIZ_1 0x00
+#define LPICF_PBSIZ_2 0x04
+#define LPICF_PBSIZ_4 0x08
+
+/*
+ * LCD Polarity Configuration Register
+ */
+#define LPOLCF_ADDR 0xfffffa21
+#define LPOLCF BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
+#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR 0xfffffa23
+#define LACDRC BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
+#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR 0xfffffa25
+#define LPXCD BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR 0xfffffa27
+#define LCKCON BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
+#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Refresh Rate Adjustment Register
+ */
+#define LRRA_ADDR 0xfffffa29
+#define LRRA BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR 0xfffffa2d
+#define LPOSR BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR 0xfffffa31
+#define LFRCM BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR 0xfffffa33
+#define LGPMR BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK 0x0f
+#define LGPMR_G1_SHIFT 0
+#define LGPMR_G2_MASK 0xf0
+#define LGPMR_G2_SHIFT 4
+
+/*
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR 0xfffffa36
+#define PWMR WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK 0x00ff /* Pulse Width */
+#define PWMR_PW_SHIFT 0
+#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
+#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
+#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
+#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
+#define PWMR_SRC_LCD 0x4000 /* LCD clock */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR 0xfffffb00
+#define RTCTIME LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCTIME_SECONDS_SHIFT 0
+#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCTIME_MINUTES_SHIFT 16
+#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCTIME_HOURS_SHIFT 24
+
+/*
+ * RTC Alarm Register
+ */
+#define RTCALRM_ADDR 0xfffffb04
+#define RTCALRM LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCALRM_SECONDS_SHIFT 0
+#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCALRM_MINUTES_SHIFT 16
+#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCALRM_HOURS_SHIFT 24
+
+/*
+ * Watchdog Timer Register
+ */
+#define WATCHDOG_ADDR 0xfffffb0a
+#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
+#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
+#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR 0xfffffb0c
+#define RTCCTL WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL 0x0020 /* Crystal Selection */
+#define RTCCTL_EN 0x0080 /* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384 RTCCTL_XTL
+#define RTCCTL_ENABLE RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register
+ */
+#define RTCISR_ADDR 0xfffffb0e
+#define RTCISR WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW 0x0001 /* Stopwatch timed out */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
+#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
+#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
+#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
+#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
+#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
+#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
+#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR 0xfffffb10
+#define RTCIENR WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
+#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
+#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
+#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
+#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
+#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
+#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
+#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
+#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
+#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
+#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
+#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
+#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
+
+/*
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR 0xfffffb12
+#define STPWCH WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register
+ */
+#define DAYR_ADDR 0xfffffb1a
+#define DAYR WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register
+ */
+#define DAYALARM_ADDR 0xfffffb1c
+#define DAYALARM WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register
+ */
+#define DRAMMC_ADDR 0xfffffc00
+#define DRAMMC WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
+#define DRAMMC_ROW12_PA10 0x0000
+#define DRAMMC_ROW12_PA21 0x4000
+#define DRAMMC_ROW12_PA23 0x8000
+#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
+#define DRAMMC_ROW0_PA11 0x0000
+#define DRAMMC_ROW0_PA22 0x1000
+#define DRAMMC_ROW0_PA23 0x2000
+#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
+#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
+#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
+#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
+#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
+#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
+#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
+#define DRAMMC_REF_SHIFT 0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR 0xfffffc02
+#define DRAMC WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
+#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
+#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
+#define DRAMC_SLW 0x0008 /* Slow RAM */
+#define DRAMC_LSP 0x0010 /* Light Sleep */
+#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
+#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
+#define DRAMC_WS_SHIFT 6
+#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT 8
+#define DRAMC_PGSZ_256K 0x0000
+#define DRAMC_PGSZ_512K 0x0100
+#define DRAMC_PGSZ_1024K 0x0200
+#define DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO 0x0400 /* EDO DRAM */
+#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT 12
+#define DRAMC_RM 0x4000 /* Refresh Mode */
+#define DRAMC_EN 0x8000 /* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR 0xfffffd00
+#define ICEMACR LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR 0xfffffd04
+#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR 0xfffffd08
+#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
+#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR 0xfffffd0a
+#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
+#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register
+ */
+#define ICEMCR_ADDR 0xfffffd0c
+#define ICEMCR WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN 0x0001 /* Compare Enable */
+#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
+#define ICEMCR_SB 0x0004 /* Single Breakpoint */
+#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
+#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register
+ */
+#define ICEMSR_ADDR 0xfffffd0e
+#define ICEMSR WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
+#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68EZ328_H_ */
--- /dev/null
+
+/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
+ *
+ * Copyright (c) 2000-2001 Lineo Inc. <www.lineo.com>
+ * Copyright (c) 2000-2001 Lineo Canada Corp. <www.lineo.ca>
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Bare & Hare Software, Inc.
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ *
+ * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
+ * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
+ */
+
+#ifndef _MC68VZ328_H_
+#define _MC68VZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/**********
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR 0xfffff000
+#define SCR BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
+#define SCR_DMAP 0x04 /* Double Map */
+#define SCR_SO 0x08 /* Supervisor Only */
+#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
+#define SCR_PRV 0x20 /* Privilege Violation */
+#define SCR_WPV 0x40 /* Write Protect Violation */
+#define SCR_BETO 0x80 /* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR LONG_REF(MRR_ADDR)
+
+/**********
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/*
+ * Chip Select Group Base Registers
+ */
+#define CSGBA_ADDR 0xfffff100
+#define CSGBB_ADDR 0xfffff102
+
+#define CSGBC_ADDR 0xfffff104
+#define CSGBD_ADDR 0xfffff106
+
+#define CSGBA WORD_REF(CSGBA_ADDR)
+#define CSGBB WORD_REF(CSGBB_ADDR)
+#define CSGBC WORD_REF(CSGBC_ADDR)
+#define CSGBD WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers
+ */
+#define CSA_ADDR 0xfffff110
+#define CSB_ADDR 0xfffff112
+#define CSC_ADDR 0xfffff114
+#define CSD_ADDR 0xfffff116
+
+#define CSA WORD_REF(CSA_ADDR)
+#define CSB WORD_REF(CSB_ADDR)
+#define CSC WORD_REF(CSC_ADDR)
+#define CSD WORD_REF(CSD_ADDR)
+
+#define CSA_EN 0x0001 /* Chip-Select Enable */
+#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSA_SIZ_SHIFT 1
+#define CSA_WS_MASK 0x0070 /* Wait State */
+#define CSA_WS_SHIFT 4
+#define CSA_BSW 0x0080 /* Data Bus Width */
+#define CSA_FLASH 0x0100 /* FLASH Memory Support */
+#define CSA_RO 0x8000 /* Read-Only */
+
+#define CSB_EN 0x0001 /* Chip-Select Enable */
+#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSB_SIZ_SHIFT 1
+#define CSB_WS_MASK 0x0070 /* Wait State */
+#define CSB_WS_SHIFT 4
+#define CSB_BSW 0x0080 /* Data Bus Width */
+#define CSB_FLASH 0x0100 /* FLASH Memory Support */
+#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP 0x2000 /* Readonly if protected */
+#define CSB_SOP 0x4000 /* Supervisor only if protected */
+#define CSB_RO 0x8000 /* Read-Only */
+
+#define CSC_EN 0x0001 /* Chip-Select Enable */
+#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSC_SIZ_SHIFT 1
+#define CSC_WS_MASK 0x0070 /* Wait State */
+#define CSC_WS_SHIFT 4
+#define CSC_BSW 0x0080 /* Data Bus Width */
+#define CSC_FLASH 0x0100 /* FLASH Memory Support */
+#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP 0x2000 /* Readonly if protected */
+#define CSC_SOP 0x4000 /* Supervisor only if protected */
+#define CSC_RO 0x8000 /* Read-Only */
+
+#define CSD_EN 0x0001 /* Chip-Select Enable */
+#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSD_SIZ_SHIFT 1
+#define CSD_WS_MASK 0x0070 /* Wait State */
+#define CSD_WS_SHIFT 4
+#define CSD_BSW 0x0080 /* Data Bus Width */
+#define CSD_FLASH 0x0100 /* FLASH Memory Support */
+#define CSD_DRAM 0x0200 /* Dram Selection */
+#define CSD_COMB 0x0400 /* Combining */
+#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP 0x2000 /* Readonly if protected */
+#define CSD_SOP 0x4000 /* Supervisor only if protected */
+#define CSD_RO 0x8000 /* Read-Only */
+
+/*
+ * Emulation Chip-Select Register
+ */
+#define EMUCS_ADDR 0xfffff118
+#define EMUCS WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK 0x0070
+#define EMUCS_WS_SHIFT 4
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register
+ */
+#define PLLCR_ADDR 0xfffff200
+#define PLLCR WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL 0x0008 /* Disable PLL */
+#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
+#define PLLCR_PRESC 0x0020 /* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR 0xfffff202
+#define PLLFSR WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK 0x00ff /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT 0x4000 /* Protect P & Q */
+#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR 0xfffff207
+#define PCTRL BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT 0
+#define PCTRL_PCEN 0x80 /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/*
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR 0xfffff300
+#define IVR BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR 0xfffff302
+#define ICR WORD_REF(ICR_ADDR)
+
+#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
+#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
+#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
+#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
+#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR 0xfffff304
+#define IMR LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */
+#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */
+#define UART1_IRQ_NUM 2 /* UART 1 interrupt */
+#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM 4 /* RTC interrupt */
+#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */
+#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
+#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */
+#define INT0_IRQ_NUM 8 /* External INT0 */
+#define INT1_IRQ_NUM 9 /* External INT1 */
+#define INT2_IRQ_NUM 10 /* External INT2 */
+#define INT3_IRQ_NUM 11 /* External INT3 */
+#define UART2_IRQ_NUM 12 /* UART 2 interrupt */
+#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */
+#define IRQ1_IRQ_NUM 16 /* IRQ1 */
+#define IRQ2_IRQ_NUM 17 /* IRQ2 */
+#define IRQ3_IRQ_NUM 18 /* IRQ3 */
+#define IRQ6_IRQ_NUM 19 /* IRQ6 */
+#define IRQ5_IRQ_NUM 20 /* IRQ5 */
+#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */
+#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
+
+#define SPI_IRQ_NUM SPI2_IRQ_NUM
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM SPI_IRQ_NUM
+#define TMR1_IRQ_NUM TMR_IRQ_NUM
+#define UART_IRQ_NUM UART1_IRQ_NUM
+
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
+#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
+#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
+#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
+#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
+#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
+#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
+#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
+#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
+#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
+#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
+#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
+#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
+#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
+#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM IMR_MSPI
+#define IMR_MTMR1 IMR_MTMR
+
+/*
+ * Interrupt Status Register
+ */
+#define ISR_ADDR 0xfffff30c
+#define ISR LONG_REF(ISR_ADDR)
+
+#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM ISR_SPI
+#define ISR_TMR1 ISR_TMR
+
+/*
+ * Interrupt Pending Register
+ */
+#define IPR_ADDR 0xfffff30c
+#define IPR LONG_REF(IPR_ADDR)
+
+#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM IPR_SPI
+#define IPR_TMR1 IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
+#define PADATA_ADDR 0xfffff401 /* Port A data register */
+#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
+
+#define PADIR BYTE_REF(PADIR_ADDR)
+#define PADATA BYTE_REF(PADATA_ADDR)
+#define PAPUEN BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x) (1 << (x))
+
+/*
+ * Port B
+ */
+#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
+#define PBDATA_ADDR 0xfffff409 /* Port B data register */
+#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
+#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
+
+#define PBDIR BYTE_REF(PBDIR_ADDR)
+#define PBDATA BYTE_REF(PBDATA_ADDR)
+#define PBPUEN BYTE_REF(PBPUEN_ADDR)
+#define PBSEL BYTE_REF(PBSEL_ADDR)
+
+#define PB(x) (1 << (x))
+
+#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
+#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
+#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
+#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
+#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
+#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
+#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
+
+/*
+ * Port C
+ */
+#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
+#define PCDATA_ADDR 0xfffff411 /* Port C data register */
+#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
+
+#define PCDIR BYTE_REF(PCDIR_ADDR)
+#define PCDATA BYTE_REF(PCDATA_ADDR)
+#define PCPDEN BYTE_REF(PCPDEN_ADDR)
+#define PCSEL BYTE_REF(PCSEL_ADDR)
+
+#define PC(x) (1 << (x))
+
+#define PC_LD0 0x01 /* Use LD0 as PC[0] */
+#define PC_LD1 0x02 /* Use LD1 as PC[1] */
+#define PC_LD2 0x04 /* Use LD2 as PC[2] */
+#define PC_LD3 0x08 /* Use LD3 as PC[3] */
+#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
+#define PC_LLP 0x20 /* Use LLP as PC[5] */
+#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
+#define PC_LACD 0x80 /* Use LACD as PC[7] */
+
+/*
+ * Port D
+ */
+#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
+#define PDDATA_ADDR 0xfffff419 /* Port D data register */
+#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
+#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
+#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
+#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
+#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
+#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
+
+#define PDDIR BYTE_REF(PDDIR_ADDR)
+#define PDDATA BYTE_REF(PDDATA_ADDR)
+#define PDPUEN BYTE_REF(PDPUEN_ADDR)
+#define PDSEL BYTE_REF(PDSEL_ADDR)
+#define PDPOL BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x) (1 << (x))
+
+#define PD_INT0 0x01 /* Use INT0 as PD[0] */
+#define PD_INT1 0x02 /* Use INT1 as PD[1] */
+#define PD_INT2 0x04 /* Use INT2 as PD[2] */
+#define PD_INT3 0x08 /* Use INT3 as PD[3] */
+#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
+#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
+#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
+#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
+
+/*
+ * Port E
+ */
+#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
+#define PEDATA_ADDR 0xfffff421 /* Port E data register */
+#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
+#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
+
+#define PEDIR BYTE_REF(PEDIR_ADDR)
+#define PEDATA BYTE_REF(PEDATA_ADDR)
+#define PEPUEN BYTE_REF(PEPUEN_ADDR)
+#define PESEL BYTE_REF(PESEL_ADDR)
+
+#define PE(x) (1 << (x))
+
+#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
+#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
+#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
+#define PE_DWE 0x08 /* Use DWE as PE[3] */
+#define PE_RXD 0x10 /* Use RXD as PE[4] */
+#define PE_TXD 0x20 /* Use TXD as PE[5] */
+#define PE_RTS 0x40 /* Use RTS as PE[6] */
+#define PE_CTS 0x80 /* Use CTS as PE[7] */
+
+/*
+ * Port F
+ */
+#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
+#define PFDATA_ADDR 0xfffff429 /* Port F data register */
+#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
+
+#define PFDIR BYTE_REF(PFDIR_ADDR)
+#define PFDATA BYTE_REF(PFDATA_ADDR)
+#define PFPUEN BYTE_REF(PFPUEN_ADDR)
+#define PFSEL BYTE_REF(PFSEL_ADDR)
+
+#define PF(x) (1 << (x))
+
+#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
+#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
+#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
+#define PF_A20 0x08 /* Use A20 as PF[3] */
+#define PF_A21 0x10 /* Use A21 as PF[4] */
+#define PF_A22 0x20 /* Use A22 as PF[5] */
+#define PF_A23 0x40 /* Use A23 as PF[6] */
+#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
+
+/*
+ * Port G
+ */
+#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
+#define PGDATA_ADDR 0xfffff431 /* Port G data register */
+#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
+
+#define PGDIR BYTE_REF(PGDIR_ADDR)
+#define PGDATA BYTE_REF(PGDATA_ADDR)
+#define PGPUEN BYTE_REF(PGPUEN_ADDR)
+#define PGSEL BYTE_REF(PGSEL_ADDR)
+
+#define PG(x) (1 << (x))
+
+#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
+#define PG_A0 0x02 /* Use A0 as PG[1] */
+#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
+#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
+#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
+#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
+
+/*
+ * Port J
+ */
+#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
+#define PJDATA_ADDR 0xfffff439 /* Port J data register */
+#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */
+#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
+
+#define PJDIR BYTE_REF(PJDIR_ADDR)
+#define PJDATA BYTE_REF(PJDATA_ADDR)
+#define PJPUEN BYTE_REF(PJPUEN_ADDR)
+#define PJSEL BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x) (1 << (x))
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
+#define PKDATA_ADDR 0xfffff441 /* Port K data register */
+#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */
+#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
+
+#define PKDIR BYTE_REF(PKDIR_ADDR)
+#define PKDATA BYTE_REF(PKDATA_ADDR)
+#define PKPUEN BYTE_REF(PKPUEN_ADDR)
+#define PKSEL BYTE_REF(PKSEL_ADDR)
+
+#define PK(x) (1 << (x))
+
+#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */
+#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */
+#define PK_R_W 0x02 /* Use R/W as PK[1] */
+#define PK_LDS 0x04 /* Use /LDS as PK[2] */
+#define PK_UDS 0x08 /* Use /UDS as PK[3] */
+#define PK_LD4 0x10 /* Use LD4 as PK[4] */
+#define PK_LD5 0x20 /* Use LD5 as PK[5] */
+#define PK_LD6 0x40 /* Use LD6 as PK[6] */
+#define PK_LD7 0x80 /* Use LD7 as PK[7] */
+
+#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
+#define PJDATA_ADDR 0xfffff439 /* Port J data register */
+#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */
+#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
+
+#define PJDIR BYTE_REF(PJDIR_ADDR)
+#define PJDATA BYTE_REF(PJDATA_ADDR)
+#define PJPUEN BYTE_REF(PJPUEN_ADDR)
+#define PJSEL BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x) (1 << (x))
+
+#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */
+#define PJ_MISO 0x02 /* Use MISO as PJ[1] */
+#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */
+#define PJ_SS 0x08 /* Use SS as PJ[3] */
+#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */
+#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */
+#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */
+#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */
+#define PMDATA_ADDR 0xfffff449 /* Port M data register */
+#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */
+#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */
+
+#define PMDIR BYTE_REF(PMDIR_ADDR)
+#define PMDATA BYTE_REF(PMDATA_ADDR)
+#define PMPUEN BYTE_REF(PMPUEN_ADDR)
+#define PMSEL BYTE_REF(PMSEL_ADDR)
+
+#define PM(x) (1 << (x))
+
+#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */
+#define PM_SDCE 0x02 /* Use SDCE as PM[1] */
+#define PM_DQMH 0x04 /* Use DQMH as PM[2] */
+#define PM_DQML 0x08 /* Use DQML as PM[3] */
+#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */
+#define PM_DMOE 0x20 /* Use DMOE as PM[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR 0xfffff500
+#define PWMC WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT 0
+#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
+#define PWMC_REPEAT_SHIFT 2
+#define PWMC_EN 0x0010 /* Enable PWM */
+#define PMNC_FIFOAV 0x0020 /* FIFO Available */
+#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
+#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT 8
+#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN PWMC_EN
+
+/*
+ * PWM Sample Register
+ */
+#define PWMS_ADDR 0xfffff502
+#define PWMS WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR 0xfffff504
+#define PWMP BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR 0xfffff505
+#define PWMCNT BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/*
+ * Timer Control register
+ */
+#define TCTL_ADDR 0xfffff600
+#define TCTL WORD_REF(TCTL_ADDR)
+
+#define TCTL_TEN 0x0001 /* Timer Enable */
+#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
+#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
+#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
+#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
+#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
+#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
+#define TCTL_IRQEN 0x0010 /* IRQ Enable */
+#define TCTL_OM 0x0020 /* Output Mode */
+#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
+#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
+#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
+#define TCTL_FRR 0x0010 /* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR TCTL_ADDR
+#define TCTL1 TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR 0xfffff602
+#define TPRER WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR TPRER_ADDR
+#define TPRER1 TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR 0xfffff604
+#define TCMP WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR TCMP_ADDR
+#define TCMP1 TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR 0xfffff606
+#define TCR WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR TCR_ADDR
+#define TCR1 TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR 0xfffff608
+#define TCN WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR TCN_ADDR
+#define TCN1 TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR 0xfffff60a
+#define TSTAT WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP 0x0001 /* Compare Event occurred */
+#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR TSTAT_ADDR
+#define TSTAT1 TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR 0xfffff800
+#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR 0xfffff802
+#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH 0x0100 /* Exchange */
+#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+
+#define USTCNT_ADDR 0xfffff900
+#define USTCNT WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
+#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
+#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
+#define USTCNT_STOP 0x0200 /* Stop bit transmission */
+#define USTCNT_ODD 0x0400 /* Odd Parity */
+#define USTCNT_PEN 0x0800 /* Parity Enable */
+#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
+#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
+#define USTCNT_RXEN 0x4000 /* Receiver Enable */
+#define USTCNT_UEN 0x8000 /* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN USTCNT_TXAE
+#define USTCNT_TXHALFEN USTCNT_TXHE
+#define USTCNT_TXEMPTYEN USTCNT_TXEE
+#define USTCNT_RXREADYEN USTCNT_RXRE
+#define USTCNT_RXHALFEN USTCNT_RXHE
+#define USTCNT_RXFULLEN USTCNT_RXFE
+#define USTCNT_CTSDELTAEN USTCNT_CTSD
+#define USTCNT_ODD_EVEN USTCNT_ODD
+#define USTCNT_PARITYEN USTCNT_PEN
+#define USTCNT_CLKMODE USTCNT_CLKM
+#define USTCNT_UARTEN USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR 0xfffff902
+#define UBAUD WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT 0
+#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT 8
+#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
+#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
+
+/*
+ * UART Receiver Register
+ */
+#define URX_ADDR 0xfffff904
+#define URX WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK 0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK 0x0200 /* Break Detected */
+#define URX_FRAME_ERROR 0x0400 /* Framing Error */
+#define URX_OVRUN 0x0800 /* Serial Overrun */
+#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
+#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register
+ */
+#define UTX_ADDR 0xfffff906
+#define UTX WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA 0x0100 /* CTS changed */
+#define UTX_CTS_STAT 0x0200 /* CTS State */
+#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
+#define UTX_NOCTS 0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS UTX_CTS_STAT
+#define UTX_IGNORE_CTS UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register
+ */
+#define UMISC_ADDR 0xfffff908
+#define UMISC WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL 0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
+#define UMISC_RTS 0x0040 /* Set RTS status */
+#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
+#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC 0x4000 /* Clock Source */
+#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
+
+/*
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR 0xfffff90a
+#define NIPR WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT 0
+#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
+#define NIPR_SELECT_SHIFT 8
+#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef struct {
+ volatile unsigned short int ustcnt;
+ volatile unsigned short int ubaud;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char rxdata;
+ } b;
+ } urx;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char txdata;
+ } b;
+ } utx;
+ volatile unsigned short int umisc;
+ volatile unsigned short int nipr;
+ volatile unsigned short int hmark;
+ volatile unsigned short int unused;
+} __attribute__((packed)) m68328_uart;
+
+
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register
+ */
+#define LSSA_ADDR 0xfffffa00
+#define LSSA LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register
+ */
+#define LVPW_ADDR 0xfffffa05
+#define LVPW BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!)
+ */
+#define LXMAX_ADDR 0xfffffa08
+#define LXMAX WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR 0xfffffa0a
+#define LYMAX WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR 0xfffffa18
+#define LCXP WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK 0xc000 /* Cursor Control */
+#define LCXP_CC_TRAMSPARENT 0x0000
+#define LCXP_CC_BLACK 0x4000
+#define LCXP_CC_REVERSED 0x8000
+#define LCXP_CC_WHITE 0xc000
+#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR 0xfffffa1a
+#define LCYP WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR 0xfffffa1c
+#define LCWCH WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK 0x001f /* Cursor Height */
+#define LCWCH_CH_SHIFT 0
+#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
+#define LCWCH_CW_SHIFT 8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR 0xfffffa1f
+#define LBLKC BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
+#define LBLKC_BD_SHIFT 0
+#define LBLKC_BKEN 0x80 /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register
+ */
+#define LPICF_ADDR 0xfffffa20
+#define LPICF BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
+#define LPICF_GS_BW 0x00
+#define LPICF_GS_GRAY_4 0x01
+#define LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
+#define LPICF_PBSIZ_1 0x00
+#define LPICF_PBSIZ_2 0x04
+#define LPICF_PBSIZ_4 0x08
+
+/*
+ * LCD Polarity Configuration Register
+ */
+#define LPOLCF_ADDR 0xfffffa21
+#define LPOLCF BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
+#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR 0xfffffa23
+#define LACDRC BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
+#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR 0xfffffa25
+#define LPXCD BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR 0xfffffa27
+#define LCKCON BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
+#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Refresh Rate Adjustment Register
+ */
+#define LRRA_ADDR 0xfffffa29
+#define LRRA BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR 0xfffffa2d
+#define LPOSR BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR 0xfffffa31
+#define LFRCM BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR 0xfffffa33
+#define LGPMR BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK 0x0f
+#define LGPMR_G1_SHIFT 0
+#define LGPMR_G2_MASK 0xf0
+#define LGPMR_G2_SHIFT 4
+
+/*
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR 0xfffffa36
+#define PWMR WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK 0x00ff /* Pulse Width */
+#define PWMR_PW_SHIFT 0
+#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
+#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
+#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
+#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
+#define PWMR_SRC_LCD 0x4000 /* LCD clock */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR 0xfffffb00
+#define RTCTIME LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCTIME_SECONDS_SHIFT 0
+#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCTIME_MINUTES_SHIFT 16
+#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCTIME_HOURS_SHIFT 24
+
+/*
+ * RTC Alarm Register
+ */
+#define RTCALRM_ADDR 0xfffffb04
+#define RTCALRM LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCALRM_SECONDS_SHIFT 0
+#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCALRM_MINUTES_SHIFT 16
+#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCALRM_HOURS_SHIFT 24
+
+/*
+ * Watchdog Timer Register
+ */
+#define WATCHDOG_ADDR 0xfffffb0a
+#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
+#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
+#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR 0xfffffb0c
+#define RTCCTL WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL 0x0020 /* Crystal Selection */
+#define RTCCTL_EN 0x0080 /* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384 RTCCTL_XTL
+#define RTCCTL_ENABLE RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register
+ */
+#define RTCISR_ADDR 0xfffffb0e
+#define RTCISR WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW 0x0001 /* Stopwatch timed out */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
+#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
+#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
+#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
+#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
+#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
+#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
+#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR 0xfffffb10
+#define RTCIENR WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
+#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
+#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
+#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
+#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
+#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
+#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
+#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
+#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
+#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
+#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
+#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
+#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
+
+/*
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR 0xfffffb12
+#define STPWCH WORD_REF(STPWCH_ADDR)
+
+#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register
+ */
+#define DAYR_ADDR 0xfffffb1a
+#define DAYR WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register
+ */
+#define DAYALARM_ADDR 0xfffffb1c
+#define DAYALARM WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register
+ */
+#define DRAMMC_ADDR 0xfffffc00
+#define DRAMMC WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
+#define DRAMMC_ROW12_PA10 0x0000
+#define DRAMMC_ROW12_PA21 0x4000
+#define DRAMMC_ROW12_PA23 0x8000
+#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
+#define DRAMMC_ROW0_PA11 0x0000
+#define DRAMMC_ROW0_PA22 0x1000
+#define DRAMMC_ROW0_PA23 0x2000
+#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
+#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
+#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
+#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
+#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
+#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
+#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
+#define DRAMMC_REF_SHIFT 0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR 0xfffffc02
+#define DRAMC WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
+#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
+#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
+#define DRAMC_SLW 0x0008 /* Slow RAM */
+#define DRAMC_LSP 0x0010 /* Light Sleep */
+#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
+#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
+#define DRAMC_WS_SHIFT 6
+#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT 8
+#define DRAMC_PGSZ_256K 0x0000
+#define DRAMC_PGSZ_512K 0x0100
+#define DRAMC_PGSZ_1024K 0x0200
+#define DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO 0x0400 /* EDO DRAM */
+#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT 12
+#define DRAMC_RM 0x4000 /* Refresh Mode */
+#define DRAMC_EN 0x8000 /* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR 0xfffffd00
+#define ICEMACR LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR 0xfffffd04
+#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR 0xfffffd08
+#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
+#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR 0xfffffd0a
+#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
+#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register
+ */
+#define ICEMCR_ADDR 0xfffffd0c
+#define ICEMCR WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN 0x0001 /* Compare Enable */
+#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
+#define ICEMCR_SB 0x0004 /* Single Breakpoint */
+#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
+#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register
+ */
+#define ICEMSR_ADDR 0xfffffd0e
+#define ICEMSR WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
+#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68VZ328_H_ */
--- /dev/null
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ struct switch_stack *sw;
+
+/* changed the size calculations - should hopefully work better. lbt */
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long) (current->mm->brk +
+ (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->u_ar0 = offsetof(struct user, regs);
+ sw = ((struct switch_stack *)regs) - 1;
+ dump->regs.d1 = regs->d1;
+ dump->regs.d2 = regs->d2;
+ dump->regs.d3 = regs->d3;
+ dump->regs.d4 = regs->d4;
+ dump->regs.d5 = regs->d5;
+ dump->regs.d6 = sw->d6;
+ dump->regs.d7 = sw->d7;
+ dump->regs.a0 = regs->a0;
+ dump->regs.a1 = regs->a1;
+ dump->regs.a2 = regs->a2;
+ dump->regs.a3 = sw->a3;
+ dump->regs.a4 = sw->a4;
+ dump->regs.a5 = sw->a5;
+ dump->regs.a6 = sw->a6;
+ dump->regs.d0 = regs->d0;
+ dump->regs.orig_d0 = regs->orig_d0;
+ dump->regs.stkadj = regs->stkadj;
+ dump->regs.sr = regs->sr;
+ dump->regs.pc = regs->pc;
+ dump->regs.fmtvec = (regs->format << 12) | regs->vector;
+ /* dump floating point stuff */
+ dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
--- /dev/null
+#ifndef __M68K_A_OUT_H__
+#define __M68K_A_OUT_H__
+
+struct exec
+{
+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
+ unsigned a_text; /* length of text, in bytes */
+ unsigned a_data; /* length of data, in bytes */
+ unsigned a_bss; /* length of uninitialized data area for file, in bytes */
+ unsigned a_syms; /* length of symbol table data in file, in bytes */
+ unsigned a_entry; /* start address */
+ unsigned a_trsize; /* length of relocation info for text, in bytes */
+ unsigned a_drsize; /* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+#endif /* __M68K_A_OUT_H__ */
--- /dev/null
+/*
+ * ADB through the IOP
+ * Written by Joshua M. Thompson
+ */
+
+/* IOP number and channel number for ADB */
+
+#define ADB_IOP IOP_NUM_ISM
+#define ADB_CHAN 2
+
+/* From the A/UX headers...maybe important, maybe not */
+
+#define ADB_IOP_LISTEN 0x01
+#define ADB_IOP_TALK 0x02
+#define ADB_IOP_EXISTS 0x04
+#define ADB_IOP_FLUSH 0x08
+#define ADB_IOP_RESET 0x10
+#define ADB_IOP_INT 0x20
+#define ADB_IOP_POLL 0x40
+#define ADB_IOP_UNINT 0x80
+
+#define AIF_RESET 0x00
+#define AIF_FLUSH 0x01
+#define AIF_LISTEN 0x08
+#define AIF_TALK 0x0C
+
+/* Flag bits in struct adb_iopmsg */
+
+#define ADB_IOP_EXPLICIT 0x80 /* nonzero if explicit command */
+#define ADB_IOP_AUTOPOLL 0x40 /* auto/SRQ polling enabled */
+#define ADB_IOP_SRQ 0x04 /* SRQ detected */
+#define ADB_IOP_TIMEOUT 0x02 /* nonzero if timeout */
+
+#ifndef __ASSEMBLY__
+
+struct adb_iopmsg {
+ __u8 flags; /* ADB flags */
+ __u8 count; /* no. of data bytes */
+ __u8 cmd; /* ADB command */
+ __u8 data[8]; /* ADB data */
+ __u8 spare[21]; /* spare */
+};
+
+#endif /* __ASSEMBLY__ */
--- /dev/null
+/*
+** asm-m68k/amigahw.h -- This header defines some macros and pointers for
+** the various Amiga custom hardware registers.
+** The naming conventions used here conform to those
+** used in the Amiga Hardware Reference Manual, 3rd Edition
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 9/24/92 by Greg Harp
+*/
+
+#ifndef _M68K_AMIGAHW_H
+#define _M68K_AMIGAHW_H
+
+#include <linux/ioport.h>
+
+ /*
+ * Different Amiga models
+ */
+
+#define AMI_UNKNOWN (0)
+#define AMI_500 (1)
+#define AMI_500PLUS (2)
+#define AMI_600 (3)
+#define AMI_1000 (4)
+#define AMI_1200 (5)
+#define AMI_2000 (6)
+#define AMI_2500 (7)
+#define AMI_3000 (8)
+#define AMI_3000T (9)
+#define AMI_3000PLUS (10)
+#define AMI_4000 (11)
+#define AMI_4000T (12)
+#define AMI_CDTV (13)
+#define AMI_CD32 (14)
+#define AMI_DRACO (15)
+
+
+ /*
+ * Chipsets
+ */
+
+extern unsigned long amiga_chipset;
+
+#define CS_STONEAGE (0)
+#define CS_OCS (1)
+#define CS_ECS (2)
+#define CS_AGA (3)
+
+
+ /*
+ * Miscellaneous
+ */
+
+extern unsigned long amiga_eclock; /* 700 kHz E Peripheral Clock */
+extern unsigned long amiga_colorclock; /* 3.5 MHz Color Clock */
+extern unsigned long amiga_chip_size; /* Chip RAM Size (bytes) */
+extern unsigned char amiga_vblank; /* VBLANK Frequency */
+
+
+#define AMIGAHW_DECLARE(name) unsigned name : 1
+#define AMIGAHW_SET(name) (amiga_hw_present.name = 1)
+#define AMIGAHW_PRESENT(name) (amiga_hw_present.name)
+
+struct amiga_hw_present {
+ /* video hardware */
+ AMIGAHW_DECLARE(AMI_VIDEO); /* Amiga Video */
+ AMIGAHW_DECLARE(AMI_BLITTER); /* Amiga Blitter */
+ AMIGAHW_DECLARE(AMBER_FF); /* Amber Flicker Fixer */
+ /* sound hardware */
+ AMIGAHW_DECLARE(AMI_AUDIO); /* Amiga Audio */
+ /* disk storage interfaces */
+ AMIGAHW_DECLARE(AMI_FLOPPY); /* Amiga Floppy */
+ AMIGAHW_DECLARE(A3000_SCSI); /* SCSI (wd33c93, A3000 alike) */
+ AMIGAHW_DECLARE(A4000_SCSI); /* SCSI (ncr53c710, A4000T alike) */
+ AMIGAHW_DECLARE(A1200_IDE); /* IDE (A1200 alike) */
+ AMIGAHW_DECLARE(A4000_IDE); /* IDE (A4000 alike) */
+ AMIGAHW_DECLARE(CD_ROM); /* CD ROM drive */
+ /* other I/O hardware */
+ AMIGAHW_DECLARE(AMI_KEYBOARD); /* Amiga Keyboard */
+ AMIGAHW_DECLARE(AMI_MOUSE); /* Amiga Mouse */
+ AMIGAHW_DECLARE(AMI_SERIAL); /* Amiga Serial */
+ AMIGAHW_DECLARE(AMI_PARALLEL); /* Amiga Parallel */
+ /* real time clocks */
+ AMIGAHW_DECLARE(A2000_CLK); /* Hardware Clock (A2000 alike) */
+ AMIGAHW_DECLARE(A3000_CLK); /* Hardware Clock (A3000 alike) */
+ /* supporting hardware */
+ AMIGAHW_DECLARE(CHIP_RAM); /* Chip RAM */
+ AMIGAHW_DECLARE(PAULA); /* Paula (8364) */
+ AMIGAHW_DECLARE(DENISE); /* Denise (8362) */
+ AMIGAHW_DECLARE(DENISE_HR); /* Denise (8373) */
+ AMIGAHW_DECLARE(LISA); /* Lisa (8375) */
+ AMIGAHW_DECLARE(AGNUS_PAL); /* Normal/Fat PAL Agnus (8367/8371) */
+ AMIGAHW_DECLARE(AGNUS_NTSC); /* Normal/Fat NTSC Agnus (8361/8370) */
+ AMIGAHW_DECLARE(AGNUS_HR_PAL); /* Fat Hires PAL Agnus (8372) */
+ AMIGAHW_DECLARE(AGNUS_HR_NTSC); /* Fat Hires NTSC Agnus (8372) */
+ AMIGAHW_DECLARE(ALICE_PAL); /* PAL Alice (8374) */
+ AMIGAHW_DECLARE(ALICE_NTSC); /* NTSC Alice (8374) */
+ AMIGAHW_DECLARE(MAGIC_REKICK); /* A3000 Magic Hard Rekick */
+ AMIGAHW_DECLARE(PCMCIA); /* PCMCIA Slot */
+ AMIGAHW_DECLARE(GG2_ISA); /* GG2 Zorro2ISA Bridge */
+ AMIGAHW_DECLARE(ZORRO); /* Zorro AutoConfig */
+ AMIGAHW_DECLARE(ZORRO3); /* Zorro III */
+};
+
+extern struct amiga_hw_present amiga_hw_present;
+
+struct CUSTOM {
+ unsigned short bltddat;
+ unsigned short dmaconr;
+ unsigned short vposr;
+ unsigned short vhposr;
+ unsigned short dskdatr;
+ unsigned short joy0dat;
+ unsigned short joy1dat;
+ unsigned short clxdat;
+ unsigned short adkconr;
+ unsigned short pot0dat;
+ unsigned short pot1dat;
+ unsigned short potgor;
+ unsigned short serdatr;
+ unsigned short dskbytr;
+ unsigned short intenar;
+ unsigned short intreqr;
+ unsigned char *dskptr;
+ unsigned short dsklen;
+ unsigned short dskdat;
+ unsigned short refptr;
+ unsigned short vposw;
+ unsigned short vhposw;
+ unsigned short copcon;
+ unsigned short serdat;
+ unsigned short serper;
+ unsigned short potgo;
+ unsigned short joytest;
+ unsigned short strequ;
+ unsigned short strvbl;
+ unsigned short strhor;
+ unsigned short strlong;
+ unsigned short bltcon0;
+ unsigned short bltcon1;
+ unsigned short bltafwm;
+ unsigned short bltalwm;
+ unsigned char *bltcpt;
+ unsigned char *bltbpt;
+ unsigned char *bltapt;
+ unsigned char *bltdpt;
+ unsigned short bltsize;
+ unsigned char pad2d;
+ unsigned char bltcon0l;
+ unsigned short bltsizv;
+ unsigned short bltsizh;
+ unsigned short bltcmod;
+ unsigned short bltbmod;
+ unsigned short bltamod;
+ unsigned short bltdmod;
+ unsigned short spare2[4];
+ unsigned short bltcdat;
+ unsigned short bltbdat;
+ unsigned short bltadat;
+ unsigned short spare3[3];
+ unsigned short deniseid;
+ unsigned short dsksync;
+ unsigned short *cop1lc;
+ unsigned short *cop2lc;
+ unsigned short copjmp1;
+ unsigned short copjmp2;
+ unsigned short copins;
+ unsigned short diwstrt;
+ unsigned short diwstop;
+ unsigned short ddfstrt;
+ unsigned short ddfstop;
+ unsigned short dmacon;
+ unsigned short clxcon;
+ unsigned short intena;
+ unsigned short intreq;
+ unsigned short adkcon;
+ struct {
+ unsigned short *audlc;
+ unsigned short audlen;
+ unsigned short audper;
+ unsigned short audvol;
+ unsigned short auddat;
+ unsigned short audspare[2];
+ } aud[4];
+ unsigned char *bplpt[8];
+ unsigned short bplcon0;
+ unsigned short bplcon1;
+ unsigned short bplcon2;
+ unsigned short bplcon3;
+ unsigned short bpl1mod;
+ unsigned short bpl2mod;
+ unsigned short bplcon4;
+ unsigned short clxcon2;
+ unsigned short bpldat[8];
+ unsigned char *sprpt[8];
+ struct {
+ unsigned short pos;
+ unsigned short ctl;
+ unsigned short dataa;
+ unsigned short datab;
+ } spr[8];
+ unsigned short color[32];
+ unsigned short htotal;
+ unsigned short hsstop;
+ unsigned short hbstrt;
+ unsigned short hbstop;
+ unsigned short vtotal;
+ unsigned short vsstop;
+ unsigned short vbstrt;
+ unsigned short vbstop;
+ unsigned short sprhstrt;
+ unsigned short sprhstop;
+ unsigned short bplhstrt;
+ unsigned short bplhstop;
+ unsigned short hhposw;
+ unsigned short hhposr;
+ unsigned short beamcon0;
+ unsigned short hsstrt;
+ unsigned short vsstrt;
+ unsigned short hcenter;
+ unsigned short diwhigh;
+ unsigned short spare4[11];
+ unsigned short fmode;
+};
+
+/*
+ * DMA register bits
+ */
+#define DMAF_SETCLR (0x8000)
+#define DMAF_AUD0 (0x0001)
+#define DMAF_AUD1 (0x0002)
+#define DMAF_AUD2 (0x0004)
+#define DMAF_AUD3 (0x0008)
+#define DMAF_DISK (0x0010)
+#define DMAF_SPRITE (0x0020)
+#define DMAF_BLITTER (0x0040)
+#define DMAF_COPPER (0x0080)
+#define DMAF_RASTER (0x0100)
+#define DMAF_MASTER (0x0200)
+#define DMAF_BLITHOG (0x0400)
+#define DMAF_BLTNZERO (0x2000)
+#define DMAF_BLTDONE (0x4000)
+#define DMAF_ALL (0x01FF)
+
+struct CIA {
+ unsigned char pra; char pad0[0xff];
+ unsigned char prb; char pad1[0xff];
+ unsigned char ddra; char pad2[0xff];
+ unsigned char ddrb; char pad3[0xff];
+ unsigned char talo; char pad4[0xff];
+ unsigned char tahi; char pad5[0xff];
+ unsigned char tblo; char pad6[0xff];
+ unsigned char tbhi; char pad7[0xff];
+ unsigned char todlo; char pad8[0xff];
+ unsigned char todmid; char pad9[0xff];
+ unsigned char todhi; char pada[0x1ff];
+ unsigned char sdr; char padb[0xff];
+ unsigned char icr; char padc[0xff];
+ unsigned char cra; char padd[0xff];
+ unsigned char crb; char pade[0xff];
+};
+
+#define zTwoBase (0x80000000)
+#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase)
+#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase)
+
+#define CUSTOM_PHYSADDR (0xdff000)
+#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR)))
+
+#define CIAA_PHYSADDR (0xbfe001)
+#define CIAB_PHYSADDR (0xbfd000)
+#define ciaa ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR)))
+#define ciab ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR)))
+
+#define CHIP_PHYSADDR (0x000000)
+
+void amiga_chip_init (void);
+void *amiga_chip_alloc(unsigned long size, const char *name);
+void *amiga_chip_alloc_res(unsigned long size, struct resource *res);
+void amiga_chip_free(void *ptr);
+unsigned long amiga_chip_avail( void ); /*MILAN*/
+extern volatile unsigned short amiga_audio_min_period;
+
+static inline void amifb_video_off(void)
+{
+ if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) {
+ /* program Denise/Lisa for a higher maximum play rate */
+ amiga_custom.htotal = 113; /* 31 kHz */
+ amiga_custom.vtotal = 223; /* 70 Hz */
+ amiga_custom.beamcon0 = 0x4390; /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */
+ /* suspend the monitor */
+ amiga_custom.hsstrt = amiga_custom.hsstop = 116;
+ amiga_custom.vsstrt = amiga_custom.vsstop = 226;
+ amiga_audio_min_period = 57;
+ }
+}
+
+struct tod3000 {
+ unsigned int :28, second2:4; /* lower digit */
+ unsigned int :28, second1:4; /* upper digit */
+ unsigned int :28, minute2:4; /* lower digit */
+ unsigned int :28, minute1:4; /* upper digit */
+ unsigned int :28, hour2:4; /* lower digit */
+ unsigned int :28, hour1:4; /* upper digit */
+ unsigned int :28, weekday:4;
+ unsigned int :28, day2:4; /* lower digit */
+ unsigned int :28, day1:4; /* upper digit */
+ unsigned int :28, month2:4; /* lower digit */
+ unsigned int :28, month1:4; /* upper digit */
+ unsigned int :28, year2:4; /* lower digit */
+ unsigned int :28, year1:4; /* upper digit */
+ unsigned int :28, cntrl1:4; /* control-byte 1 */
+ unsigned int :28, cntrl2:4; /* control-byte 2 */
+ unsigned int :28, cntrl3:4; /* control-byte 3 */
+};
+#define TOD3000_CNTRL1_HOLD 0
+#define TOD3000_CNTRL1_FREE 9
+#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000)))
+
+struct tod2000 {
+ unsigned int :28, second2:4; /* lower digit */
+ unsigned int :28, second1:4; /* upper digit */
+ unsigned int :28, minute2:4; /* lower digit */
+ unsigned int :28, minute1:4; /* upper digit */
+ unsigned int :28, hour2:4; /* lower digit */
+ unsigned int :28, hour1:4; /* upper digit */
+ unsigned int :28, day2:4; /* lower digit */
+ unsigned int :28, day1:4; /* upper digit */
+ unsigned int :28, month2:4; /* lower digit */
+ unsigned int :28, month1:4; /* upper digit */
+ unsigned int :28, year2:4; /* lower digit */
+ unsigned int :28, year1:4; /* upper digit */
+ unsigned int :28, weekday:4;
+ unsigned int :28, cntrl1:4; /* control-byte 1 */
+ unsigned int :28, cntrl2:4; /* control-byte 2 */
+ unsigned int :28, cntrl3:4; /* control-byte 3 */
+};
+
+#define TOD2000_CNTRL1_HOLD (1<<0)
+#define TOD2000_CNTRL1_BUSY (1<<1)
+#define TOD2000_CNTRL3_24HMODE (1<<2)
+#define TOD2000_HOUR1_PM (1<<2)
+#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000)))
+
+#endif /* _M68K_AMIGAHW_H */
--- /dev/null
+/*
+** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 10/2/92 by Greg Harp
+*/
+
+#ifndef _ASMm68k_AMIGAINTS_H_
+#define _ASMm68k_AMIGAINTS_H_
+
+#include <asm/irq.h>
+
+/*
+** Amiga Interrupt sources.
+**
+*/
+
+#define AUTO_IRQS (8)
+#define AMI_STD_IRQS (14)
+#define CIA_IRQS (5)
+#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
+
+/* builtin serial port interrupts */
+#define IRQ_AMIGA_TBE (IRQ_USER+0)
+#define IRQ_AMIGA_RBF (IRQ_USER+11)
+
+/* floppy disk interrupts */
+#define IRQ_AMIGA_DSKBLK (IRQ_USER+1)
+#define IRQ_AMIGA_DSKSYN (IRQ_USER+12)
+
+/* software interrupts */
+#define IRQ_AMIGA_SOFT (IRQ_USER+2)
+
+/* interrupts from external hardware */
+#define IRQ_AMIGA_PORTS IRQ_AUTO_2
+#define IRQ_AMIGA_EXTER IRQ_AUTO_6
+
+/* copper interrupt */
+#define IRQ_AMIGA_COPPER (IRQ_USER+4)
+
+/* vertical blanking interrupt */
+#define IRQ_AMIGA_VERTB (IRQ_USER+5)
+
+/* Blitter done interrupt */
+#define IRQ_AMIGA_BLIT (IRQ_USER+6)
+
+/* Audio interrupts */
+#define IRQ_AMIGA_AUD0 (IRQ_USER+7)
+#define IRQ_AMIGA_AUD1 (IRQ_USER+8)
+#define IRQ_AMIGA_AUD2 (IRQ_USER+9)
+#define IRQ_AMIGA_AUD3 (IRQ_USER+10)
+
+/* CIA interrupt sources */
+#define IRQ_AMIGA_CIAA (IRQ_USER+14)
+#define IRQ_AMIGA_CIAA_TA (IRQ_USER+14)
+#define IRQ_AMIGA_CIAA_TB (IRQ_USER+15)
+#define IRQ_AMIGA_CIAA_ALRM (IRQ_USER+16)
+#define IRQ_AMIGA_CIAA_SP (IRQ_USER+17)
+#define IRQ_AMIGA_CIAA_FLG (IRQ_USER+18)
+#define IRQ_AMIGA_CIAB (IRQ_USER+19)
+#define IRQ_AMIGA_CIAB_TA (IRQ_USER+19)
+#define IRQ_AMIGA_CIAB_TB (IRQ_USER+20)
+#define IRQ_AMIGA_CIAB_ALRM (IRQ_USER+21)
+#define IRQ_AMIGA_CIAB_SP (IRQ_USER+22)
+#define IRQ_AMIGA_CIAB_FLG (IRQ_USER+23)
+
+
+/* INTREQR masks */
+#define IF_SETCLR 0x8000 /* set/clr bit */
+#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */
+#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */
+#define IF_DSKSYN 0x1000 /* disk sync interrupt */
+#define IF_RBF 0x0800 /* serial receive buffer full interrupt */
+#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */
+#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */
+#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */
+#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */
+#define IF_BLIT 0x0040 /* blitter done interrupt */
+#define IF_VERTB 0x0020 /* vertical blanking interrupt */
+#define IF_COPER 0x0010 /* copper interrupt */
+#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */
+#define IF_SOFT 0x0004 /* software initiated interrupt */
+#define IF_DSKBLK 0x0002 /* diskblock DMA finished */
+#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */
+
+/* CIA interrupt control register bits */
+
+#define CIA_ICR_TA 0x01
+#define CIA_ICR_TB 0x02
+#define CIA_ICR_ALRM 0x04
+#define CIA_ICR_SP 0x08
+#define CIA_ICR_FLG 0x10
+#define CIA_ICR_ALL 0x1f
+#define CIA_ICR_SETCLR 0x80
+
+extern void amiga_init_IRQ(void);
+
+/* to access the interrupt control registers of CIA's use only
+** these functions, they behave exactly like the amiga os routines
+*/
+
+extern struct ciabase ciaa_base, ciab_base;
+
+extern void cia_init_IRQ(struct ciabase *base);
+extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask);
+extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask);
+
+#endif /* asm-m68k/amigaints.h */
--- /dev/null
+/*
+** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
+** found on the Amiga 1200
+** This information was found by disassembling card.resource,
+** so the definitions may not be 100% correct
+** anyone has an official doc ?
+**
+** Copyright 1997 by Alain Malek
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 11/28/97 by Alain Malek
+*/
+
+#ifndef _M68K_AMIGAYLE_H_
+#define _M68K_AMIGAYLE_H_
+
+#include <linux/types.h>
+#include <asm/amigahw.h>
+
+/* memory layout */
+
+#define GAYLE_RAM (0x600000+zTwoBase)
+#define GAYLE_RAMSIZE (0x400000)
+#define GAYLE_ATTRIBUTE (0xa00000+zTwoBase)
+#define GAYLE_ATTRIBUTESIZE (0x020000)
+#define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */
+#define GAYLE_IOSIZE (0x010000)
+#define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */
+
+/* offset for accessing odd IO registers */
+#define GAYLE_ODD (GAYLE_IO_8BITODD-GAYLE_IO-1)
+
+/* GAYLE registers */
+
+struct GAYLE {
+ u_char cardstatus;
+ u_char pad0[0x1000-1];
+
+ u_char intreq;
+ u_char pad1[0x1000-1];
+
+ u_char inten;
+ u_char pad2[0x1000-1];
+
+ u_char config;
+ u_char pad3[0x1000-1];
+};
+
+#define GAYLE_ADDRESS (0xda8000) /* gayle main registers base address */
+
+#define GAYLE_RESET (0xa40000) /* write 0x00 to start reset,
+ read 1 byte to stop reset */
+
+#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
+#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
+
+#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))
+
+#if 0
+#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
+#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
+
+#define gayle_inw(a) readw( GAYLE_IO+(a) )
+#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
+#endif
+
+/* GAYLE_CARDSTATUS bit def */
+
+#define GAYLE_CS_CCDET 0x40 /* credit card detect */
+#define GAYLE_CS_BVD1 0x20 /* battery voltage detect 1 */
+#define GAYLE_CS_SC 0x20 /* credit card status change */
+#define GAYLE_CS_BVD2 0x10 /* battery voltage detect 2 */
+#define GAYLE_CS_DA 0x10 /* digital audio */
+#define GAYLE_CS_WR 0x08 /* write enable (1 == enabled) */
+#define GAYLE_CS_BSY 0x04 /* credit card busy */
+#define GAYLE_CS_IRQ 0x04 /* interrupt request */
+
+/* GAYLE_IRQ bit def */
+
+#define GAYLE_IRQ_IDE 0x80
+#define GAYLE_IRQ_CCDET 0x40
+#define GAYLE_IRQ_BVD1 0x20
+#define GAYLE_IRQ_SC 0x20
+#define GAYLE_IRQ_BVD2 0x10
+#define GAYLE_IRQ_DA 0x10
+#define GAYLE_IRQ_WR 0x08
+#define GAYLE_IRQ_BSY 0x04
+#define GAYLE_IRQ_IRQ 0x04
+#define GAYLE_IRQ_IDEACK1 0x02
+#define GAYLE_IRQ_IDEACK0 0x01
+
+/* GAYLE_CONFIG bit def
+ (bit 0-1 for program voltage, bit 2-3 for access speed */
+
+#define GAYLE_CFG_0V 0x00
+#define GAYLE_CFG_5V 0x01
+#define GAYLE_CFG_12V 0x02
+
+#define GAYLE_CFG_100NS 0x08
+#define GAYLE_CFG_150NS 0x04
+#define GAYLE_CFG_250NS 0x00
+#define GAYLE_CFG_720NS 0x0c
+
+#endif /* asm-m68k/amigayle.h */
--- /dev/null
+/*
+** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions
+**
+** Copyright 1997 by Alain Malek
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 12/10/97 by Alain Malek
+*/
+
+#ifndef __AMIGA_PCMCIA_H__
+#define __AMIGA_PCMCIA_H__
+
+#include <asm/amigayle.h>
+
+/* prototypes */
+
+void pcmcia_reset(void);
+int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len);
+void pcmcia_program_voltage(int voltage);
+void pcmcia_access_speed(int speed);
+void pcmcia_write_enable(void);
+void pcmcia_write_disable(void);
+
+static inline u_char pcmcia_read_status(void)
+{
+ return (gayle.cardstatus & 0x7c);
+}
+
+static inline u_char pcmcia_get_intreq(void)
+{
+ return (gayle.intreq);
+}
+
+static inline void pcmcia_ack_int(u_char intreq)
+{
+ gayle.intreq = 0xf8;
+}
+
+static inline void pcmcia_enable_irq(void)
+{
+ gayle.inten |= GAYLE_IRQ_IRQ;
+}
+
+static inline void pcmcia_disable_irq(void)
+{
+ gayle.inten &= ~GAYLE_IRQ_IRQ;
+}
+
+#define PCMCIA_INSERTED (gayle.cardstatus & GAYLE_CS_CCDET)
+
+/* valid voltages for pcmcia_ProgramVoltage */
+
+#define PCMCIA_0V 0
+#define PCMCIA_5V 5
+#define PCMCIA_12V 12
+
+/* valid speeds for pcmcia_AccessSpeed */
+
+#define PCMCIA_SPEED_100NS 100
+#define PCMCIA_SPEED_150NS 150
+#define PCMCIA_SPEED_250NS 250
+#define PCMCIA_SPEED_720NS 720
+
+/* PCMCIA Tuple codes */
+
+#define CISTPL_NULL 0x00
+#define CISTPL_DEVICE 0x01
+#define CISTPL_LONGLINK_CB 0x02
+#define CISTPL_CONFIG_CB 0x04
+#define CISTPL_CFTABLE_ENTRY_CB 0x05
+#define CISTPL_LONGLINK_MFC 0x06
+#define CISTPL_BAR 0x07
+#define CISTPL_CHECKSUM 0x10
+#define CISTPL_LONGLINK_A 0x11
+#define CISTPL_LONGLINK_C 0x12
+#define CISTPL_LINKTARGET 0x13
+#define CISTPL_NO_LINK 0x14
+#define CISTPL_VERS_1 0x15
+#define CISTPL_ALTSTR 0x16
+#define CISTPL_DEVICE_A 0x17
+#define CISTPL_JEDEC_C 0x18
+#define CISTPL_JEDEC_A 0x19
+#define CISTPL_CONFIG 0x1a
+#define CISTPL_CFTABLE_ENTRY 0x1b
+#define CISTPL_DEVICE_OC 0x1c
+#define CISTPL_DEVICE_OA 0x1d
+#define CISTPL_DEVICE_GEO 0x1e
+#define CISTPL_DEVICE_GEO_A 0x1f
+#define CISTPL_MANFID 0x20
+#define CISTPL_FUNCID 0x21
+#define CISTPL_FUNCE 0x22
+#define CISTPL_SWIL 0x23
+#define CISTPL_END 0xff
+
+/* FUNCID */
+
+#define CISTPL_FUNCID_MULTI 0x00
+#define CISTPL_FUNCID_MEMORY 0x01
+#define CISTPL_FUNCID_SERIAL 0x02
+#define CISTPL_FUNCID_PARALLEL 0x03
+#define CISTPL_FUNCID_FIXED 0x04
+#define CISTPL_FUNCID_VIDEO 0x05
+#define CISTPL_FUNCID_NETWORK 0x06
+#define CISTPL_FUNCID_AIMS 0x07
+#define CISTPL_FUNCID_SCSI 0x08
+
+#endif
--- /dev/null
+/****************************************************************************/
+
+/*
+ * anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ * (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef anchor_h
+#define anchor_h
+/****************************************************************************/
+
+/*
+ * Define basic addressing info.
+ */
+#if defined(CONFIG_M5407C3)
+#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */
+#define COMEM_IRQ 25 /* IRQ of anchor part */
+#else
+#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */
+#define COMEM_IRQ 25 /* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ * 4-byte registers of CO-MEM, so adjust register addresses for
+ * easy access. Handy macro for word access too.
+ */
+#define LREG(a) ((a) >> 2)
+#define WREG(a) ((a) >> 1)
+
+
+/*
+ * Define base addresses within CO-MEM Lite register address space.
+ */
+#define COMEM_I2O 0x0000 /* I2O registers */
+#define COMEM_OPREGS 0x0400 /* Operation registers */
+#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */
+#define COMEM_SHMEM 0x4000 /* Shared memory region */
+
+#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */
+
+
+/*
+ * Define CO-MEM Registers.
+ */
+#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */
+#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */
+#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */
+#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */
+#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */
+#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */
+#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */
+#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */
+
+#define COMEM_DAHBASE 0x0460 /* Direct access base address */
+
+#define COMEM_NVCMD 0x04a0 /* I2C serial command */
+#define COMEM_NVREAD 0x04a4 /* I2C serial read */
+#define COMEM_NVSTAT 0x04a8 /* I2C status */
+
+#define COMEM_DMALBASE 0x04b0 /* DMA local base address */
+#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */
+#define COMEM_DMASIZE 0x04b8 /* DMA size */
+#define COMEM_DMACTL 0x04bc /* DMA control */
+
+#define COMEM_HCTL 0x04e0 /* Host control */
+#define COMEM_HINT 0x04e4 /* Host interrupt control/status */
+#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */
+#define COMEM_LINT 0x04f4 /* Local interrupt contole status */
+#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */
+
+#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */
+
+
+/*
+ * Commands and flags for use with Direct Access Register.
+ */
+#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */
+#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */
+#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */
+#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */
+#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */
+#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */
+#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */
+#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */
+
+#define COMEM_DA_ADDR(a) ((a) & 0xffffe000)
+
+#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff)
+
+
+/*
+ * The PCI bus will be limited in what slots will actually be used.
+ * Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_M5407C3)
+#define COMEM_MINDEV 14 /* Minimum valid DEVICE */
+#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */
+#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */
+#else
+#define COMEM_MINDEV 0 /* Minimum valid DEVICE */
+#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */
+#endif
+
+#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif /* anchor_h */
--- /dev/null
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_APOLLO_DMA_H
+#define _ASM_APOLLO_DMA_H
+
+#include <asm/apollohw.h> /* need byte IO */
+#include <linux/spinlock.h> /* And spinlocks */
+#include <linux/delay.h>
+
+
+#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
+#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE)))
+
+/*
+ * NOTES about DMA transfers:
+ *
+ * controller 1: channels 0-3, byte operations, ports 00-1F
+ * controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ * - ALL registers are 8 bits only, regardless of transfer size
+ * - channel 4 is not used - cascades 1 into 2.
+ * - channels 0-3 are byte - addresses/counts are for physical bytes
+ * - channels 5-7 are word - addresses/counts are for physical words
+ * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ * - transfer count loaded to registers is 1 less than actual count
+ * - controller 2 offsets are all even (2x offsets for controller 1)
+ * - page registers for 5-7 don't use data bit 0, represent 128K pages
+ * - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ * Address mapping for channels 0-3:
+ *
+ * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * P7 ... P0 A7 ... A0 A7 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Address mapping for channels 5-7:
+ *
+ * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
+ * | ... | \ \ ... \ \ \ ... \ \
+ * | ... | \ \ ... \ \ \ ... \ (not used)
+ * | ... | \ \ ... \ \ \ ... \
+ * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS 8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */
+#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */
+#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */
+#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
+#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */
+#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
+#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */
+#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
+
+#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */
+#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */
+#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */
+#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
+#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */
+#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
+#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */
+#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
+
+#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */
+#define DMA_ADDR_1 (IO_DMA1_BASE+0x02)
+#define DMA_ADDR_2 (IO_DMA1_BASE+0x04)
+#define DMA_ADDR_3 (IO_DMA1_BASE+0x06)
+#define DMA_ADDR_4 (IO_DMA2_BASE+0x00)
+#define DMA_ADDR_5 (IO_DMA2_BASE+0x04)
+#define DMA_ADDR_6 (IO_DMA2_BASE+0x08)
+#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C)
+
+#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */
+#define DMA_CNT_1 (IO_DMA1_BASE+0x03)
+#define DMA_CNT_2 (IO_DMA1_BASE+0x05)
+#define DMA_CNT_3 (IO_DMA1_BASE+0x07)
+#define DMA_CNT_4 (IO_DMA2_BASE+0x02)
+#define DMA_CNT_5 (IO_DMA2_BASE+0x06)
+#define DMA_CNT_6 (IO_DMA2_BASE+0x0A)
+#define DMA_CNT_7 (IO_DMA2_BASE+0x0E)
+
+#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT 0x10
+
+#define DMA_8BIT 0
+#define DMA_16BIT 1
+#define DMA_BUSMASTER 2
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(dmanr, DMA1_MASK_REG);
+ else
+ dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(dmanr | 4, DMA1_MASK_REG);
+ else
+ dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(0, DMA1_CLEAR_FF_REG);
+ else
+ dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+ if (dmanr<=3)
+ dma_outb(mode | dmanr, DMA1_MODE_REG);
+ else
+ dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ if (dmanr <= 3) {
+ dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+ dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+ } else {
+ dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+ dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+ }
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ count--;
+ if (dmanr <= 3) {
+ dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+ dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+ } else {
+ dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+ dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+ }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+ : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+ /* using short to get 16-bit wrap around */
+ unsigned short count;
+
+ count = 1 + dma_inb(io_port);
+ count += dma_inb(io_port) << 8;
+
+ return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+/* These are in arch/m68k/apollo/dma.c: */
+extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
+extern void dma_unmap_page(unsigned short dma_addr);
+
+#endif /* _ASM_APOLLO_DMA_H */
--- /dev/null
+/* apollohw.h : some structures to access apollo HW */
+
+#ifndef _ASMm68k_APOLLOHW_H_
+#define _ASMm68k_APOLLOHW_H_
+
+#include <linux/types.h>
+
+/*
+ apollo models
+*/
+
+extern u_long apollo_model;
+
+#define APOLLO_UNKNOWN (0)
+#define APOLLO_DN3000 (1)
+#define APOLLO_DN3010 (2)
+#define APOLLO_DN3500 (3)
+#define APOLLO_DN4000 (4)
+#define APOLLO_DN4500 (5)
+
+/*
+ see scn2681 data sheet for more info.
+ member names are read_write.
+*/
+
+#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x
+
+struct SCN2681 {
+
+ DECLARE_2681_FIELD(mra);
+ DECLARE_2681_FIELD(sra_csra);
+ DECLARE_2681_FIELD(BRGtest_cra);
+ DECLARE_2681_FIELD(rhra_thra);
+ DECLARE_2681_FIELD(ipcr_acr);
+ DECLARE_2681_FIELD(isr_imr);
+ DECLARE_2681_FIELD(ctu_ctur);
+ DECLARE_2681_FIELD(ctl_ctlr);
+ DECLARE_2681_FIELD(mrb);
+ DECLARE_2681_FIELD(srb_csrb);
+ DECLARE_2681_FIELD(tst_crb);
+ DECLARE_2681_FIELD(rhrb_thrb);
+ DECLARE_2681_FIELD(reserved);
+ DECLARE_2681_FIELD(ip_opcr);
+ DECLARE_2681_FIELD(startCnt_setOutBit);
+ DECLARE_2681_FIELD(stopCnt_resetOutBit);
+
+};
+
+#if 0
+struct mc146818 {
+
+ unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4,
+ minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4;
+ unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4,
+ day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4;
+ unsigned int month1:4, month2:4, year1:4, year2:4, :16;
+
+};
+#endif
+
+struct mc146818 {
+ unsigned char second, alarm_second;
+ unsigned char minute, alarm_minute;
+ unsigned char hours, alarm_hours;
+ unsigned char day_of_week, day_of_month;
+ unsigned char month, year;
+};
+
+
+#define IO_BASE 0x80000000
+
+extern u_long sio01_physaddr;
+extern u_long sio23_physaddr;
+extern u_long rtc_physaddr;
+extern u_long pica_physaddr;
+extern u_long picb_physaddr;
+extern u_long cpuctrl_physaddr;
+extern u_long timer_physaddr;
+
+#define SAU7_SIO01_PHYSADDR 0x10400
+#define SAU7_SIO23_PHYSADDR 0x10500
+#define SAU7_RTC_PHYSADDR 0x10900
+#define SAU7_PICA 0x11000
+#define SAU7_PICB 0x11100
+#define SAU7_CPUCTRL 0x10100
+#define SAU7_TIMER 0x010800
+
+#define SAU8_SIO01_PHYSADDR 0x8400
+#define SAU8_RTC_PHYSADDR 0x8900
+#define SAU8_PICA 0x9400
+#define SAU8_PICB 0x9500
+#define SAU8_CPUCTRL 0x8100
+#define SAU8_TIMER 0x8800
+
+#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr)))
+#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr)))
+#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr)))
+#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
+#define pica (IO_BASE + pica_physaddr)
+#define picb (IO_BASE + picb_physaddr)
+#define timer (IO_BASE + timer_physaddr)
+#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
+
+#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
+
+#define IRQ_APOLLO IRQ_USER
+
+#endif
--- /dev/null
+#ifndef _ASM_M68K_FD_H
+#define _ASM_M68K_FD_H
+
+/* Definitions for the Atari Floppy driver */
+
+struct atari_format_descr {
+ int track; /* to be formatted */
+ int head; /* "" "" */
+ int sect_offset; /* offset of first sector */
+};
+
+#endif
--- /dev/null
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+
+/*
+** WD1772 stuff
+ */
+
+/* register codes */
+
+#define FDCSELREG_STP (0x80) /* command/status register */
+#define FDCSELREG_TRA (0x82) /* track register */
+#define FDCSELREG_SEC (0x84) /* sector register */
+#define FDCSELREG_DTA (0x86) /* data register */
+
+/* register names for FDC_READ/WRITE macros */
+
+#define FDCREG_CMD 0
+#define FDCREG_STATUS 0
+#define FDCREG_TRACK 2
+#define FDCREG_SECTOR 4
+#define FDCREG_DATA 6
+
+/* command opcodes */
+
+#define FDCCMD_RESTORE (0x00) /* - */
+#define FDCCMD_SEEK (0x10) /* | */
+#define FDCCMD_STEP (0x20) /* | TYP 1 Commands */
+#define FDCCMD_STIN (0x40) /* | */
+#define FDCCMD_STOT (0x60) /* - */
+#define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */
+#define FDCCMD_WRSEC (0xa0) /* - " */
+#define FDCCMD_RDADR (0xc0) /* - */
+#define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */
+#define FDCCMD_WRTRA (0xf0) /* - */
+#define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */
+
+/* command modifier bits */
+
+#define FDCCMDADD_SR6 (0x00) /* step rate settings */
+#define FDCCMDADD_SR12 (0x01)
+#define FDCCMDADD_SR2 (0x02)
+#define FDCCMDADD_SR3 (0x03)
+#define FDCCMDADD_V (0x04) /* verify */
+#define FDCCMDADD_H (0x08) /* wait for spin-up */
+#define FDCCMDADD_U (0x10) /* update track register */
+#define FDCCMDADD_M (0x10) /* multiple sector access */
+#define FDCCMDADD_E (0x04) /* head settling flag */
+#define FDCCMDADD_P (0x02) /* precompensation off */
+#define FDCCMDADD_A0 (0x01) /* DAM flag */
+
+/* status register bits */
+
+#define FDCSTAT_MOTORON (0x80) /* motor on */
+#define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */
+#define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */
+#define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */
+#define FDCSTAT_RECNF (0x10) /* record not found */
+#define FDCSTAT_CRC (0x08) /* CRC error */
+#define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */
+#define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */
+#define FDCSTAT_IDX (0x02) /* Index status (Type I) */
+#define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */
+#define FDCSTAT_BUSY (0x01) /* FDC is busy */
+
+
+/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */
+#define DSKSIDE (0x01)
+
+#define DSKDRVNONE (0x06)
+#define DSKDRV0 (0x02)
+#define DSKDRV1 (0x04)
+
+/* step rates */
+#define FDCSTEP_6 0x00
+#define FDCSTEP_12 0x01
+#define FDCSTEP_2 0x02
+#define FDCSTEP_3 0x03
+
+#endif
--- /dev/null
+#ifndef _LINUX_ATARI_JOYSTICK_H
+#define _LINUX_ATARI_JOYSTICK_H
+
+/*
+ * linux/include/linux/atari_joystick.h
+ * header file for Atari Joystick driver
+ * by Robert de Vries (robert@and.nl) on 19Jul93
+ */
+
+void atari_joystick_interrupt(char*);
+int atari_joystick_init(void);
+extern int atari_mouse_buttons;
+
+struct joystick_status {
+ char fire;
+ char dir;
+ int ready;
+ int active;
+ wait_queue_head_t wait;
+};
+
+#endif
--- /dev/null
+
+#ifndef _atari_stdma_h
+#define _atari_stdma_h
+
+
+#include <linux/interrupt.h>
+
+
+/***************************** Prototypes *****************************/
+
+void stdma_lock(irq_handler_t handler, void *data);
+void stdma_release( void );
+int stdma_others_waiting( void );
+int stdma_islocked( void );
+void *stdma_locked_by( void );
+void stdma_init( void );
+
+/************************* End of Prototypes **************************/
+
+
+
+#endif /* _atari_stdma_h */
--- /dev/null
+#ifndef _M68K_ATARI_STRAM_H
+#define _M68K_ATARI_STRAM_H
+
+/*
+ * Functions for Atari ST-RAM management
+ */
+
+/* public interface */
+void *atari_stram_alloc(long size, const char *owner);
+void atari_stram_free(void *);
+
+/* functions called internally by other parts of the kernel */
+void atari_stram_init(void);
+void atari_stram_reserve_pages(void *start_mem);
+void atari_stram_mem_init_hook (void);
+
+#endif /*_M68K_ATARI_STRAM_H */
--- /dev/null
+/*
+** linux/atarihw.h -- This header defines some macros and pointers for
+** the various Atari custom hardware registers.
+**
+** Copyright 1994 by Björn Brauel
+**
+** 5/1/94 Roman Hodek:
+** Added definitions for TT specific chips.
+**
+** 1996-09-13 lars brinkhoff <f93labr@dd.chalmers.se>:
+** Finally added definitions for the matrix/codec and the DSP56001 host
+** interface.
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _LINUX_ATARIHW_H_
+#define _LINUX_ATARIHW_H_
+
+#include <linux/types.h>
+#include <asm/bootinfo.h>
+#include <asm/raw_io.h>
+
+extern u_long atari_mch_cookie;
+extern u_long atari_mch_type;
+extern u_long atari_switches;
+extern int atari_rtc_year_offset;
+extern int atari_dont_touch_floppy_select;
+
+/* convenience macros for testing machine type */
+#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST)
+#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
+ (atari_mch_cookie & 0xffff) == 0)
+#define MACH_IS_MSTE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
+ (atari_mch_cookie & 0xffff) == 0x10)
+#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT)
+#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
+#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA)
+#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40)
+
+/* values for atari_switches */
+#define ATARI_SWITCH_IKBD 0x01
+#define ATARI_SWITCH_MIDI 0x02
+#define ATARI_SWITCH_SND6 0x04
+#define ATARI_SWITCH_SND7 0x08
+#define ATARI_SWITCH_OVSC_SHIFT 16
+#define ATARI_SWITCH_OVSC_IKBD (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_MIDI (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_SND6 (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_SND7 (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_MASK 0xffff0000
+
+/*
+ * Define several Hardware-Chips for indication so that for the ATARI we do
+ * no longer decide whether it is a Falcon or other machine . It's just
+ * important what hardware the machine uses
+ */
+
+/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */
+
+#define ATARIHW_DECLARE(name) unsigned name : 1
+#define ATARIHW_SET(name) (atari_hw_present.name = 1)
+#define ATARIHW_PRESENT(name) (atari_hw_present.name)
+
+struct atari_hw_present {
+ /* video hardware */
+ ATARIHW_DECLARE(STND_SHIFTER); /* ST-Shifter - no base low ! */
+ ATARIHW_DECLARE(EXTD_SHIFTER); /* STe-Shifter - 24 bit address */
+ ATARIHW_DECLARE(TT_SHIFTER); /* TT-Shifter */
+ ATARIHW_DECLARE(VIDEL_SHIFTER); /* Falcon-Shifter */
+ /* sound hardware */
+ ATARIHW_DECLARE(YM_2149); /* Yamaha YM 2149 */
+ ATARIHW_DECLARE(PCM_8BIT); /* PCM-Sound in STe-ATARI */
+ ATARIHW_DECLARE(CODEC); /* CODEC Sound (Falcon) */
+ /* disk storage interfaces */
+ ATARIHW_DECLARE(TT_SCSI); /* Directly mapped NCR5380 */
+ ATARIHW_DECLARE(ST_SCSI); /* NCR5380 via ST-DMA (Falcon) */
+ ATARIHW_DECLARE(ACSI); /* Standard ACSI like in STs */
+ ATARIHW_DECLARE(IDE); /* IDE Interface */
+ ATARIHW_DECLARE(FDCSPEED); /* 8/16 MHz switch for FDC */
+ /* other I/O hardware */
+ ATARIHW_DECLARE(ST_MFP); /* The ST-MFP (there should be no Atari
+ without it... but who knows?) */
+ ATARIHW_DECLARE(TT_MFP); /* 2nd MFP */
+ ATARIHW_DECLARE(SCC); /* Serial Communications Contr. */
+ ATARIHW_DECLARE(ST_ESCC); /* SCC Z83230 in an ST */
+ ATARIHW_DECLARE(ANALOG_JOY); /* Paddle Interface for STe
+ and Falcon */
+ ATARIHW_DECLARE(MICROWIRE); /* Microwire Interface */
+ /* DMA */
+ ATARIHW_DECLARE(STND_DMA); /* 24 Bit limited ST-DMA */
+ ATARIHW_DECLARE(EXTD_DMA); /* 32 Bit ST-DMA */
+ ATARIHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */
+ ATARIHW_DECLARE(SCC_DMA); /* DMA for the SCC */
+ /* real time clocks */
+ ATARIHW_DECLARE(TT_CLK); /* TT compatible clock chip */
+ ATARIHW_DECLARE(MSTE_CLK); /* Mega ST(E) clock chip */
+ /* supporting hardware */
+ ATARIHW_DECLARE(SCU); /* System Control Unit */
+ ATARIHW_DECLARE(BLITTER); /* Blitter */
+ ATARIHW_DECLARE(VME); /* VME Bus */
+ ATARIHW_DECLARE(DSP56K); /* DSP56k processor in Falcon */
+};
+
+extern struct atari_hw_present atari_hw_present;
+
+
+/* Reading the MFP port register gives a machine independent delay, since the
+ * MFP always has a 8 MHz clock. This avoids problems with the varying length
+ * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
+ */
+#define MFPDELAY() \
+ __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
+
+/* Do cache push/invalidate for DMA read/write. This function obeys the
+ * snooping on some machines (Medusa) and processors: The Medusa itself can
+ * snoop, but only the '040 can source data from its cache to DMA writes i.e.,
+ * reads from memory). Both '040 and '060 invalidate cache entries on snooped
+ * DMA reads (i.e., writes to memory).
+ */
+
+
+#define atari_readb raw_inb
+#define atari_writeb raw_outb
+
+#define atari_inb_p raw_inb
+#define atari_outb_p raw_outb
+
+
+
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+
+static inline void dma_cache_maintenance( unsigned long paddr,
+ unsigned long len,
+ int writeflag )
+
+{
+ if (writeflag) {
+ if (!MACH_IS_MEDUSA || CPU_IS_060)
+ cache_push( paddr, len );
+ }
+ else {
+ if (!MACH_IS_MEDUSA)
+ cache_clear( paddr, len );
+ }
+}
+
+
+/*
+** Shifter
+ */
+#define ST_LOW 0
+#define ST_MID 1
+#define ST_HIGH 2
+#define TT_LOW 7
+#define TT_MID 4
+#define TT_HIGH 6
+
+#define SHF_BAS (0xffff8200)
+struct SHIFTER
+ {
+ u_char pad1;
+ u_char bas_hi;
+ u_char pad2;
+ u_char bas_md;
+ u_char pad3;
+ u_char volatile vcounthi;
+ u_char pad4;
+ u_char volatile vcountmid;
+ u_char pad5;
+ u_char volatile vcountlow;
+ u_char volatile syncmode;
+ u_char pad6;
+ u_char pad7;
+ u_char bas_lo;
+ };
+# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
+
+#define SHF_FBAS (0xffff820e)
+struct SHIFTER_F030
+ {
+ u_short off_next;
+ u_short scn_width;
+ };
+# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS))
+
+
+#define SHF_TBAS (0xffff8200)
+struct SHIFTER_TT {
+ u_char char_dummy0;
+ u_char bas_hi; /* video mem base addr, high and mid byte */
+ u_char char_dummy1;
+ u_char bas_md;
+ u_char char_dummy2;
+ u_char vcount_hi; /* pointer to currently displayed byte */
+ u_char char_dummy3;
+ u_char vcount_md;
+ u_char char_dummy4;
+ u_char vcount_lo;
+ u_short st_sync; /* ST compatible sync mode register, unused */
+ u_char char_dummy5;
+ u_char bas_lo; /* video mem addr, low byte */
+ u_char char_dummy6[2+3*16];
+ /* $ffff8240: */
+ u_short color_reg[16]; /* 16 color registers */
+ u_char st_shiftmode; /* ST compatible shift mode register, unused */
+ u_char char_dummy7;
+ u_short tt_shiftmode; /* TT shift mode register */
+
+
+};
+#define shifter_tt ((*(volatile struct SHIFTER_TT *)SHF_TBAS))
+
+/* values for shifter_tt->tt_shiftmode */
+#define TT_SHIFTER_STLOW 0x0000
+#define TT_SHIFTER_STMID 0x0100
+#define TT_SHIFTER_STHIGH 0x0200
+#define TT_SHIFTER_TTLOW 0x0700
+#define TT_SHIFTER_TTMID 0x0400
+#define TT_SHIFTER_TTHIGH 0x0600
+#define TT_SHIFTER_MODEMASK 0x0700
+#define TT_SHIFTER_NUMMODE 0x0008
+#define TT_SHIFTER_PALETTE_MASK 0x000f
+#define TT_SHIFTER_GRAYMODE 0x1000
+
+/* 256 TT palette registers */
+#define TT_PALETTE_BASE (0xffff8400)
+#define tt_palette ((volatile u_short *)TT_PALETTE_BASE)
+
+#define TT_PALETTE_RED_MASK 0x0f00
+#define TT_PALETTE_GREEN_MASK 0x00f0
+#define TT_PALETTE_BLUE_MASK 0x000f
+
+/*
+** Falcon030 VIDEL Video Controller
+** for description see File 'linux\tools\atari\hardware.txt
+ */
+#define f030_col ((u_long *) 0xffff9800)
+#define f030_xreg ((u_short*) 0xffff8282)
+#define f030_yreg ((u_short*) 0xffff82a2)
+#define f030_creg ((u_short*) 0xffff82c0)
+#define f030_sreg ((u_short*) 0xffff8260)
+#define f030_mreg ((u_short*) 0xffff820a)
+#define f030_linewidth ((u_short*) 0xffff820e)
+#define f030_hscroll ((u_char*) 0xffff8265)
+
+#define VIDEL_BAS (0xffff8260)
+struct VIDEL {
+ u_short st_shift;
+ u_short pad1;
+ u_char xoffset_s;
+ u_char xoffset;
+ u_short f_shift;
+ u_char pad2[0x1a];
+ u_short hht;
+ u_short hbb;
+ u_short hbe;
+ u_short hdb;
+ u_short hde;
+ u_short hss;
+ u_char pad3[0x14];
+ u_short vft;
+ u_short vbb;
+ u_short vbe;
+ u_short vdb;
+ u_short vde;
+ u_short vss;
+ u_char pad4[0x12];
+ u_short control;
+ u_short mode;
+};
+#define videl ((*(volatile struct VIDEL *)VIDEL_BAS))
+
+/*
+** DMA/WD1772 Disk Controller
+ */
+
+#define FWD_BAS (0xffff8604)
+struct DMA_WD
+ {
+ u_short fdc_acces_seccount;
+ u_short dma_mode_status;
+ u_char dma_vhi; /* Some extended ST-DMAs can handle 32 bit addresses */
+ u_char dma_hi;
+ u_char char_dummy2;
+ u_char dma_md;
+ u_char char_dummy3;
+ u_char dma_lo;
+ u_short fdc_speed;
+ };
+# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS))
+/* alias */
+#define st_dma dma_wd
+/* The two highest bytes of an extended DMA as a short; this is a must
+ * for the Medusa.
+ */
+#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608))
+
+/*
+** YM2149 Sound Chip
+** access in bytes
+ */
+
+#define YM_BAS (0xffff8800)
+struct SOUND_YM
+ {
+ u_char rd_data_reg_sel;
+ u_char char_dummy1;
+ u_char wd_data;
+ };
+#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS))
+
+/* TT SCSI DMA */
+
+#define TT_SCSI_DMA_BAS (0xffff8700)
+struct TT_DMA {
+ u_char char_dummy0;
+ u_char dma_addr_hi;
+ u_char char_dummy1;
+ u_char dma_addr_hmd;
+ u_char char_dummy2;
+ u_char dma_addr_lmd;
+ u_char char_dummy3;
+ u_char dma_addr_lo;
+ u_char char_dummy4;
+ u_char dma_cnt_hi;
+ u_char char_dummy5;
+ u_char dma_cnt_hmd;
+ u_char char_dummy6;
+ u_char dma_cnt_lmd;
+ u_char char_dummy7;
+ u_char dma_cnt_lo;
+ u_long dma_restdata;
+ u_short dma_ctrl;
+};
+#define tt_scsi_dma ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS))
+
+/* TT SCSI Controller 5380 */
+
+#define TT_5380_BAS (0xffff8781)
+struct TT_5380 {
+ u_char scsi_data;
+ u_char char_dummy1;
+ u_char scsi_icr;
+ u_char char_dummy2;
+ u_char scsi_mode;
+ u_char char_dummy3;
+ u_char scsi_tcr;
+ u_char char_dummy4;
+ u_char scsi_idstat;
+ u_char char_dummy5;
+ u_char scsi_dmastat;
+ u_char char_dummy6;
+ u_char scsi_targrcv;
+ u_char char_dummy7;
+ u_char scsi_inircv;
+};
+#define tt_scsi ((*(volatile struct TT_5380 *)TT_5380_BAS))
+#define tt_scsi_regp ((volatile char *)TT_5380_BAS)
+
+
+/*
+** Falcon DMA Sound Subsystem
+ */
+
+#define MATRIX_BASE (0xffff8930)
+struct MATRIX
+{
+ u_short source;
+ u_short destination;
+ u_char external_frequency_divider;
+ u_char internal_frequency_divider;
+};
+#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE)
+
+#define CODEC_BASE (0xffff8936)
+struct CODEC
+{
+ u_char tracks;
+ u_char input_source;
+#define CODEC_SOURCE_ADC 1
+#define CODEC_SOURCE_MATRIX 2
+ u_char adc_source;
+#define ADC_SOURCE_RIGHT_PSG 1
+#define ADC_SOURCE_LEFT_PSG 2
+ u_char gain;
+#define CODEC_GAIN_RIGHT 0x0f
+#define CODEC_GAIN_LEFT 0xf0
+ u_char attenuation;
+#define CODEC_ATTENUATION_RIGHT 0x0f
+#define CODEC_ATTENUATION_LEFT 0xf0
+ u_char unused1;
+ u_char status;
+#define CODEC_OVERFLOW_RIGHT 1
+#define CODEC_OVERFLOW_LEFT 2
+ u_char unused2, unused3, unused4, unused5;
+ u_char gpio_directions;
+#define GPIO_IN 0
+#define GPIO_OUT 1
+ u_char unused6;
+ u_char gpio_data;
+};
+#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE)
+
+/*
+** Falcon Blitter
+*/
+
+#define BLT_BAS (0xffff8a00)
+
+struct BLITTER
+ {
+ u_short halftone[16];
+ u_short src_x_inc;
+ u_short src_y_inc;
+ u_long src_address;
+ u_short endmask1;
+ u_short endmask2;
+ u_short endmask3;
+ u_short dst_x_inc;
+ u_short dst_y_inc;
+ u_long dst_address;
+ u_short wd_per_line;
+ u_short ln_per_bb;
+ u_short hlf_op_reg;
+ u_short log_op_reg;
+ u_short lin_nm_reg;
+ u_short skew_reg;
+ };
+# define blitter ((*(volatile struct BLITTER *)BLT_BAS))
+
+
+/*
+** SCC Z8530
+ */
+
+#define SCC_BAS (0xffff8c81)
+struct SCC
+ {
+ u_char cha_a_ctrl;
+ u_char char_dummy1;
+ u_char cha_a_data;
+ u_char char_dummy2;
+ u_char cha_b_ctrl;
+ u_char char_dummy3;
+ u_char cha_b_data;
+ };
+# define scc ((*(volatile struct SCC*)SCC_BAS))
+
+/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
+# define st_escc ((*(volatile struct SCC*)0xfffffa31))
+# define st_escc_dsr ((*(volatile char *)0xfffffa39))
+
+/* TT SCC DMA Controller (same chip as SCSI DMA) */
+
+#define TT_SCC_DMA_BAS (0xffff8c00)
+#define tt_scc_dma ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS))
+
+/*
+** VIDEL Palette Register
+ */
+
+#define FPL_BAS (0xffff9800)
+struct VIDEL_PALETTE
+ {
+ u_long reg[256];
+ };
+# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS))
+
+
+/*
+** Falcon DSP Host Interface
+ */
+
+#define DSP56K_HOST_INTERFACE_BASE (0xffffa200)
+struct DSP56K_HOST_INTERFACE {
+ u_char icr;
+#define DSP56K_ICR_RREQ 0x01
+#define DSP56K_ICR_TREQ 0x02
+#define DSP56K_ICR_HF0 0x08
+#define DSP56K_ICR_HF1 0x10
+#define DSP56K_ICR_HM0 0x20
+#define DSP56K_ICR_HM1 0x40
+#define DSP56K_ICR_INIT 0x80
+
+ u_char cvr;
+#define DSP56K_CVR_HV_MASK 0x1f
+#define DSP56K_CVR_HC 0x80
+
+ u_char isr;
+#define DSP56K_ISR_RXDF 0x01
+#define DSP56K_ISR_TXDE 0x02
+#define DSP56K_ISR_TRDY 0x04
+#define DSP56K_ISR_HF2 0x08
+#define DSP56K_ISR_HF3 0x10
+#define DSP56K_ISR_DMA 0x40
+#define DSP56K_ISR_HREQ 0x80
+
+ u_char ivr;
+
+ union {
+ u_char b[4];
+ u_short w[2];
+ u_long l;
+ } data;
+};
+#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE))
+
+/*
+** MFP 68901
+ */
+
+#define MFP_BAS (0xfffffa01)
+struct MFP
+ {
+ u_char par_dt_reg;
+ u_char char_dummy1;
+ u_char active_edge;
+ u_char char_dummy2;
+ u_char data_dir;
+ u_char char_dummy3;
+ u_char int_en_a;
+ u_char char_dummy4;
+ u_char int_en_b;
+ u_char char_dummy5;
+ u_char int_pn_a;
+ u_char char_dummy6;
+ u_char int_pn_b;
+ u_char char_dummy7;
+ u_char int_sv_a;
+ u_char char_dummy8;
+ u_char int_sv_b;
+ u_char char_dummy9;
+ u_char int_mk_a;
+ u_char char_dummy10;
+ u_char int_mk_b;
+ u_char char_dummy11;
+ u_char vec_adr;
+ u_char char_dummy12;
+ u_char tim_ct_a;
+ u_char char_dummy13;
+ u_char tim_ct_b;
+ u_char char_dummy14;
+ u_char tim_ct_cd;
+ u_char char_dummy15;
+ u_char tim_dt_a;
+ u_char char_dummy16;
+ u_char tim_dt_b;
+ u_char char_dummy17;
+ u_char tim_dt_c;
+ u_char char_dummy18;
+ u_char tim_dt_d;
+ u_char char_dummy19;
+ u_char sync_char;
+ u_char char_dummy20;
+ u_char usart_ctr;
+ u_char char_dummy21;
+ u_char rcv_stat;
+ u_char char_dummy22;
+ u_char trn_stat;
+ u_char char_dummy23;
+ u_char usart_dta;
+ };
+# define mfp ((*(volatile struct MFP*)MFP_BAS))
+
+/* TT's second MFP */
+
+#define TT_MFP_BAS (0xfffffa81)
+# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS))
+
+
+/* TT System Control Unit */
+
+#define TT_SCU_BAS (0xffff8e01)
+struct TT_SCU {
+ u_char sys_mask;
+ u_char char_dummy1;
+ u_char sys_stat;
+ u_char char_dummy2;
+ u_char softint;
+ u_char char_dummy3;
+ u_char vmeint;
+ u_char char_dummy4;
+ u_char gp_reg1;
+ u_char char_dummy5;
+ u_char gp_reg2;
+ u_char char_dummy6;
+ u_char vme_mask;
+ u_char char_dummy7;
+ u_char vme_stat;
+};
+#define tt_scu ((*(volatile struct TT_SCU *)TT_SCU_BAS))
+
+/* TT real time clock */
+
+#define TT_RTC_BAS (0xffff8961)
+struct TT_RTC {
+ u_char regsel;
+ u_char dummy;
+ u_char data;
+};
+#define tt_rtc ((*(volatile struct TT_RTC *)TT_RTC_BAS))
+
+
+/*
+** ACIA 6850
+ */
+/* constants for the ACIA registers */
+
+/* baudrate selection and reset (Baudrate = clock/factor) */
+#define ACIA_DIV1 0
+#define ACIA_DIV16 1
+#define ACIA_DIV64 2
+#define ACIA_RESET 3
+
+/* character format */
+#define ACIA_D7E2S (0<<2) /* 7 data, even parity, 2 stop */
+#define ACIA_D7O2S (1<<2) /* 7 data, odd parity, 2 stop */
+#define ACIA_D7E1S (2<<2) /* 7 data, even parity, 1 stop */
+#define ACIA_D7O1S (3<<2) /* 7 data, odd parity, 1 stop */
+#define ACIA_D8N2S (4<<2) /* 8 data, no parity, 2 stop */
+#define ACIA_D8N1S (5<<2) /* 8 data, no parity, 1 stop */
+#define ACIA_D8E1S (6<<2) /* 8 data, even parity, 1 stop */
+#define ACIA_D8O1S (7<<2) /* 8 data, odd parity, 1 stop */
+
+/* transmit control */
+#define ACIA_RLTID (0<<5) /* RTS low, TxINT disabled */
+#define ACIA_RLTIE (1<<5) /* RTS low, TxINT enabled */
+#define ACIA_RHTID (2<<5) /* RTS high, TxINT disabled */
+#define ACIA_RLTIDSB (3<<5) /* RTS low, TxINT disabled, send break */
+
+/* receive control */
+#define ACIA_RID (0<<7) /* RxINT disabled */
+#define ACIA_RIE (1<<7) /* RxINT enabled */
+
+/* status fields of the ACIA */
+#define ACIA_RDRF 1 /* Receive Data Register Full */
+#define ACIA_TDRE (1<<1) /* Transmit Data Register Empty */
+#define ACIA_DCD (1<<2) /* Data Carrier Detect */
+#define ACIA_CTS (1<<3) /* Clear To Send */
+#define ACIA_FE (1<<4) /* Framing Error */
+#define ACIA_OVRN (1<<5) /* Receiver Overrun */
+#define ACIA_PE (1<<6) /* Parity Error */
+#define ACIA_IRQ (1<<7) /* Interrupt Request */
+
+#define ACIA_BAS (0xfffffc00)
+struct ACIA
+ {
+ u_char key_ctrl;
+ u_char char_dummy1;
+ u_char key_data;
+ u_char char_dummy2;
+ u_char mid_ctrl;
+ u_char char_dummy3;
+ u_char mid_data;
+ };
+# define acia ((*(volatile struct ACIA*)ACIA_BAS))
+
+#define TT_DMASND_BAS (0xffff8900)
+struct TT_DMASND {
+ u_char int_ctrl; /* Falcon: Interrupt control */
+ u_char ctrl;
+ u_char pad2;
+ u_char bas_hi;
+ u_char pad3;
+ u_char bas_mid;
+ u_char pad4;
+ u_char bas_low;
+ u_char pad5;
+ u_char addr_hi;
+ u_char pad6;
+ u_char addr_mid;
+ u_char pad7;
+ u_char addr_low;
+ u_char pad8;
+ u_char end_hi;
+ u_char pad9;
+ u_char end_mid;
+ u_char pad10;
+ u_char end_low;
+ u_char pad11[12];
+ u_char track_select; /* Falcon */
+ u_char mode;
+ u_char pad12[14];
+ /* Falcon only: */
+ u_short cbar_src;
+ u_short cbar_dst;
+ u_char ext_div;
+ u_char int_div;
+ u_char rec_track_select;
+ u_char dac_src;
+ u_char adc_src;
+ u_char input_gain;
+ u_short output_atten;
+};
+# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS))
+
+#define DMASND_MFP_INT_REPLAY 0x01
+#define DMASND_MFP_INT_RECORD 0x02
+#define DMASND_TIMERA_INT_REPLAY 0x04
+#define DMASND_TIMERA_INT_RECORD 0x08
+
+#define DMASND_CTRL_OFF 0x00
+#define DMASND_CTRL_ON 0x01
+#define DMASND_CTRL_REPEAT 0x02
+#define DMASND_CTRL_RECORD_ON 0x10
+#define DMASND_CTRL_RECORD_OFF 0x00
+#define DMASND_CTRL_RECORD_REPEAT 0x20
+#define DMASND_CTRL_SELECT_REPLAY 0x00
+#define DMASND_CTRL_SELECT_RECORD 0x80
+#define DMASND_MODE_MONO 0x80
+#define DMASND_MODE_STEREO 0x00
+#define DMASND_MODE_8BIT 0x00
+#define DMASND_MODE_16BIT 0x40 /* Falcon only */
+#define DMASND_MODE_6KHZ 0x00 /* Falcon: mute */
+#define DMASND_MODE_12KHZ 0x01
+#define DMASND_MODE_25KHZ 0x02
+#define DMASND_MODE_50KHZ 0x03
+
+
+#define DMASNDSetBase(bufstart) \
+ do { \
+ tt_dmasnd.bas_hi = (unsigned char)(((bufstart) & 0xff0000) >> 16); \
+ tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \
+ tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \
+ } while( 0 )
+
+#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) + \
+ (tt_dmasnd.addr_mid << 8) + \
+ (tt_dmasnd.addr_low))
+
+#define DMASNDSetEnd(bufend) \
+ do { \
+ tt_dmasnd.end_hi = (unsigned char)(((bufend) & 0xff0000) >> 16); \
+ tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \
+ tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \
+ } while( 0 )
+
+
+#define TT_MICROWIRE_BAS (0xffff8922)
+struct TT_MICROWIRE {
+ u_short data;
+ u_short mask;
+};
+# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS))
+
+#define MW_LM1992_ADDR 0x0400
+
+#define MW_LM1992_VOLUME(dB) \
+ (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2)))
+#define MW_LM1992_BALLEFT(dB) \
+ (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
+#define MW_LM1992_BALRIGHT(dB) \
+ (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
+#define MW_LM1992_TREBLE(dB) \
+ (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
+#define MW_LM1992_BASS(dB) \
+ (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
+
+#define MW_LM1992_PSG_LOW 0x000
+#define MW_LM1992_PSG_HIGH 0x001
+#define MW_LM1992_PSG_OFF 0x002
+
+#define MSTE_RTC_BAS (0xfffffc21)
+
+struct MSTE_RTC {
+ u_char sec_ones;
+ u_char dummy1;
+ u_char sec_tens;
+ u_char dummy2;
+ u_char min_ones;
+ u_char dummy3;
+ u_char min_tens;
+ u_char dummy4;
+ u_char hr_ones;
+ u_char dummy5;
+ u_char hr_tens;
+ u_char dummy6;
+ u_char weekday;
+ u_char dummy7;
+ u_char day_ones;
+ u_char dummy8;
+ u_char day_tens;
+ u_char dummy9;
+ u_char mon_ones;
+ u_char dummy10;
+ u_char mon_tens;
+ u_char dummy11;
+ u_char year_ones;
+ u_char dummy12;
+ u_char year_tens;
+ u_char dummy13;
+ u_char mode;
+ u_char dummy14;
+ u_char test;
+ u_char dummy15;
+ u_char reset;
+};
+
+#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
+
+#endif /* linux/atarihw.h */
+
--- /dev/null
+/*
+** atariints.h -- Atari Linux interrupt handling structs and prototypes
+**
+** Copyright 1994 by Björn Brauel
+**
+** 5/2/94 Roman Hodek:
+** TT interrupt definitions added.
+**
+** 12/02/96: (Roman)
+** Adapted to new int handling scheme (see ataints.c); revised numbering
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _LINUX_ATARIINTS_H_
+#define _LINUX_ATARIINTS_H_
+
+#include <asm/irq.h>
+#include <asm/atarihw.h>
+
+/*
+** Atari Interrupt sources.
+**
+*/
+
+#define STMFP_SOURCE_BASE 8
+#define TTMFP_SOURCE_BASE 24
+#define SCC_SOURCE_BASE 40
+#define VME_SOURCE_BASE 56
+#define VME_MAX_SOURCES 16
+
+#define NUM_ATARI_SOURCES (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE)
+
+/* convert vector number to int source number */
+#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
+
+/* convert irq_handler index to vector number */
+#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8)))
+
+/* interrupt service types */
+#define IRQ_TYPE_SLOW 0
+#define IRQ_TYPE_FAST 1
+#define IRQ_TYPE_PRIO 2
+
+/* ST-MFP interrupts */
+#define IRQ_MFP_BUSY (8)
+#define IRQ_MFP_DCD (9)
+#define IRQ_MFP_CTS (10)
+#define IRQ_MFP_GPU (11)
+#define IRQ_MFP_TIMD (12)
+#define IRQ_MFP_TIMC (13)
+#define IRQ_MFP_ACIA (14)
+#define IRQ_MFP_FDC (15)
+#define IRQ_MFP_ACSI IRQ_MFP_FDC
+#define IRQ_MFP_FSCSI IRQ_MFP_FDC
+#define IRQ_MFP_IDE IRQ_MFP_FDC
+#define IRQ_MFP_TIMB (16)
+#define IRQ_MFP_SERERR (17)
+#define IRQ_MFP_SEREMPT (18)
+#define IRQ_MFP_RECERR (19)
+#define IRQ_MFP_RECFULL (20)
+#define IRQ_MFP_TIMA (21)
+#define IRQ_MFP_RI (22)
+#define IRQ_MFP_MMD (23)
+
+/* TT-MFP interrupts */
+#define IRQ_TT_MFP_IO0 (24)
+#define IRQ_TT_MFP_IO1 (25)
+#define IRQ_TT_MFP_SCC (26)
+#define IRQ_TT_MFP_RI (27)
+#define IRQ_TT_MFP_TIMD (28)
+#define IRQ_TT_MFP_TIMC (29)
+#define IRQ_TT_MFP_DRVRDY (30)
+#define IRQ_TT_MFP_SCSIDMA (31)
+#define IRQ_TT_MFP_TIMB (32)
+#define IRQ_TT_MFP_SERERR (33)
+#define IRQ_TT_MFP_SEREMPT (34)
+#define IRQ_TT_MFP_RECERR (35)
+#define IRQ_TT_MFP_RECFULL (36)
+#define IRQ_TT_MFP_TIMA (37)
+#define IRQ_TT_MFP_RTC (38)
+#define IRQ_TT_MFP_SCSI (39)
+
+/* SCC interrupts */
+#define IRQ_SCCB_TX (40)
+#define IRQ_SCCB_STAT (42)
+#define IRQ_SCCB_RX (44)
+#define IRQ_SCCB_SPCOND (46)
+#define IRQ_SCCA_TX (48)
+#define IRQ_SCCA_STAT (50)
+#define IRQ_SCCA_RX (52)
+#define IRQ_SCCA_SPCOND (54)
+
+
+#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */
+#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */
+
+
+#define MFP_ENABLE 0
+#define MFP_PENDING 1
+#define MFP_SERVICE 2
+#define MFP_MASK 3
+
+/* Utility functions for setting/clearing bits in the interrupt registers of
+ * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is
+ * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */
+
+static inline int get_mfp_bit( unsigned irq, int type )
+
+{ unsigned char mask, *reg;
+
+ mask = 1 << (irq & 7);
+ reg = (unsigned char *)&mfp.int_en_a + type*4 +
+ ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+ return( *reg & mask );
+}
+
+static inline void set_mfp_bit( unsigned irq, int type )
+
+{ unsigned char mask, *reg;
+
+ mask = 1 << (irq & 7);
+ reg = (unsigned char *)&mfp.int_en_a + type*4 +
+ ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+ __asm__ __volatile__ ( "orb %0,%1"
+ : : "di" (mask), "m" (*reg) : "memory" );
+}
+
+static inline void clear_mfp_bit( unsigned irq, int type )
+
+{ unsigned char mask, *reg;
+
+ mask = ~(1 << (irq & 7));
+ reg = (unsigned char *)&mfp.int_en_a + type*4 +
+ ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+ if (type == MFP_PENDING || type == MFP_SERVICE)
+ __asm__ __volatile__ ( "moveb %0,%1"
+ : : "di" (mask), "m" (*reg) : "memory" );
+ else
+ __asm__ __volatile__ ( "andb %0,%1"
+ : : "di" (mask), "m" (*reg) : "memory" );
+}
+
+/*
+ * {en,dis}able_irq have the usual semantics of temporary blocking the
+ * interrupt, but not loosing requests that happen between disabling and
+ * enabling. This is done with the MFP mask registers.
+ */
+
+static inline void atari_enable_irq( unsigned irq )
+
+{
+ if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+ set_mfp_bit( irq, MFP_MASK );
+}
+
+static inline void atari_disable_irq( unsigned irq )
+
+{
+ if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+ clear_mfp_bit( irq, MFP_MASK );
+}
+
+/*
+ * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not
+ * "stored"
+ */
+
+static inline void atari_turnon_irq( unsigned irq )
+
+{
+ if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+ set_mfp_bit( irq, MFP_ENABLE );
+}
+
+static inline void atari_turnoff_irq( unsigned irq )
+
+{
+ if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+ clear_mfp_bit( irq, MFP_ENABLE );
+ clear_mfp_bit( irq, MFP_PENDING );
+}
+
+static inline void atari_clear_pending_irq( unsigned irq )
+
+{
+ if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+ clear_mfp_bit( irq, MFP_PENDING );
+}
+
+static inline int atari_irq_pending( unsigned irq )
+
+{
+ if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 );
+ return( get_mfp_bit( irq, MFP_PENDING ) );
+}
+
+unsigned long atari_register_vme_int( void );
+void atari_unregister_vme_int( unsigned long );
+
+#endif /* linux/atariints.h */
--- /dev/null
+/*
+** atarikb.h -- This header contains the prototypes of functions of
+** the intelligent keyboard of the Atari needed by the
+** mouse and joystick drivers.
+**
+** Copyright 1994 by Robert de Vries
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 20 Feb 1994 by Robert de Vries
+*/
+
+#ifndef _LINUX_ATARIKB_H
+#define _LINUX_ATARIKB_H
+
+void ikbd_write(const char *, int);
+void ikbd_mouse_button_action(int mode);
+void ikbd_mouse_rel_pos(void);
+void ikbd_mouse_abs_pos(int xmax, int ymax);
+void ikbd_mouse_kbd_mode(int dx, int dy);
+void ikbd_mouse_thresh(int x, int y);
+void ikbd_mouse_scale(int x, int y);
+void ikbd_mouse_pos_get(int *x, int *y);
+void ikbd_mouse_pos_set(int x, int y);
+void ikbd_mouse_y0_bot(void);
+void ikbd_mouse_y0_top(void);
+void ikbd_mouse_disable(void);
+void ikbd_joystick_event_on(void);
+void ikbd_joystick_event_off(void);
+void ikbd_joystick_get_state(void);
+void ikbd_joystick_disable(void);
+
+/* Hook for MIDI serial driver */
+extern void (*atari_MIDI_interrupt_hook) (void);
+/* Hook for mouse driver */
+extern void (*atari_mouse_interrupt_hook) (char *);
+/* Hook for keyboard inputdev driver */
+extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
+/* Hook for mouse inputdev driver */
+extern void (*atari_input_mouse_interrupt_hook) (char *);
+
+int atari_keyb_init(void);
+
+#endif /* _LINUX_ATARIKB_H */
--- /dev/null
+#ifdef __uClinux__
+#include "atomic_no.h"
+#else
+#include "atomic_mm.h"
+#endif
--- /dev/null
+#ifndef __ARCH_M68K_ATOMIC__
+#define __ARCH_M68K_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = i)
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+ __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i));
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i));
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+ __asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+ __asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+ return c != 0;
+}
+
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+ return c != 0;
+}
+
+#ifdef CONFIG_RMW_INSNS
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ int t, tmp;
+
+ __asm__ __volatile__(
+ "1: movel %2,%1\n"
+ " addl %3,%1\n"
+ " casl %2,%1,%0\n"
+ " jne 1b"
+ : "+m" (*v), "=&d" (t), "=&d" (tmp)
+ : "g" (i), "2" (atomic_read(v)));
+ return t;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ int t, tmp;
+
+ __asm__ __volatile__(
+ "1: movel %2,%1\n"
+ " subl %3,%1\n"
+ " casl %2,%1,%0\n"
+ " jne 1b"
+ : "+m" (*v), "=&d" (t), "=&d" (tmp)
+ : "g" (i), "2" (atomic_read(v)));
+ return t;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#else /* !CONFIG_RMW_INSNS */
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+ unsigned long flags;
+ int t;
+
+ local_irq_save(flags);
+ t = atomic_read(v);
+ t += i;
+ atomic_set(v, t);
+ local_irq_restore(flags);
+
+ return t;
+}
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+ unsigned long flags;
+ int t;
+
+ local_irq_save(flags);
+ t = atomic_read(v);
+ t -= i;
+ atomic_set(v, t);
+ local_irq_restore(flags);
+
+ return t;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ local_irq_save(flags);
+ prev = atomic_read(v);
+ if (prev == old)
+ atomic_set(v, new);
+ local_irq_restore(flags);
+ return prev;
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ local_irq_save(flags);
+ prev = atomic_read(v);
+ atomic_set(v, new);
+ local_irq_restore(flags);
+ return prev;
+}
+
+#endif /* !CONFIG_RMW_INSNS */
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i));
+ return c != 0;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
+ return c != 0;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+ __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+ __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68K_ATOMIC __ */
--- /dev/null
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+ __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+ __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+ char c;
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__("subl %2,%1; seq %0"
+ : "=d" (c), "+m" (*v)
+ : "d" (i));
+#else
+ __asm__ __volatile__("subl %2,%1; seq %0"
+ : "=d" (c), "+m" (*v)
+ : "di" (i));
+#endif
+ return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+ __asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+ return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+ __asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+ return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+ __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+ __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+ unsigned long temp, flags;
+
+ local_irq_save(flags);
+ temp = *(long *)v;
+ temp += i;
+ *(long *)v = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+ unsigned long temp, flags;
+
+ local_irq_save(flags);
+ temp = *(long *)v;
+ temp -= i;
+ *(long *)v = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
--- /dev/null
+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "bitops_no.h"
+#else
+#include "bitops_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_BITOPS_H
+#define _M68K_BITOPS_H
+/*
+ * Copyright 1992, Linus Torvalds.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+
+/*
+ * Require 68020 or better.
+ *
+ * They use the standard big-endian m680x0 bit ordering.
+ */
+
+#define test_and_set_bit(nr,vaddr) \
+ (__builtin_constant_p(nr) ? \
+ __constant_test_and_set_bit(nr, vaddr) : \
+ __generic_test_and_set_bit(nr, vaddr))
+
+#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr)
+
+static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr)
+{
+ char *p = (char *)vaddr + (nr ^ 31) / 8;
+ char retval;
+
+ __asm__ __volatile__ ("bset %2,%1; sne %0"
+ : "=d" (retval), "+m" (*p)
+ : "di" (nr & 7));
+
+ return retval;
+}
+
+static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr)
+{
+ char retval;
+
+ __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0"
+ : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+ return retval;
+}
+
+#define set_bit(nr,vaddr) \
+ (__builtin_constant_p(nr) ? \
+ __constant_set_bit(nr, vaddr) : \
+ __generic_set_bit(nr, vaddr))
+
+#define __set_bit(nr,vaddr) set_bit(nr,vaddr)
+
+static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr)
+{
+ char *p = (char *)vaddr + (nr ^ 31) / 8;
+ __asm__ __volatile__ ("bset %1,%0"
+ : "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr)
+{
+ __asm__ __volatile__ ("bfset %1{%0:#1}"
+ : : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+#define test_and_clear_bit(nr,vaddr) \
+ (__builtin_constant_p(nr) ? \
+ __constant_test_and_clear_bit(nr, vaddr) : \
+ __generic_test_and_clear_bit(nr, vaddr))
+
+#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr)
+
+static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr)
+{
+ char *p = (char *)vaddr + (nr ^ 31) / 8;
+ char retval;
+
+ __asm__ __volatile__ ("bclr %2,%1; sne %0"
+ : "=d" (retval), "+m" (*p)
+ : "di" (nr & 7));
+
+ return retval;
+}
+
+static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr)
+{
+ char retval;
+
+ __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0"
+ : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+ return retval;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+#define clear_bit(nr,vaddr) \
+ (__builtin_constant_p(nr) ? \
+ __constant_clear_bit(nr, vaddr) : \
+ __generic_clear_bit(nr, vaddr))
+#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr)
+
+static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr)
+{
+ char *p = (char *)vaddr + (nr ^ 31) / 8;
+ __asm__ __volatile__ ("bclr %1,%0"
+ : "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr)
+{
+ __asm__ __volatile__ ("bfclr %1{%0:#1}"
+ : : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+#define test_and_change_bit(nr,vaddr) \
+ (__builtin_constant_p(nr) ? \
+ __constant_test_and_change_bit(nr, vaddr) : \
+ __generic_test_and_change_bit(nr, vaddr))
+
+#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr)
+#define __change_bit(nr,vaddr) change_bit(nr,vaddr)
+
+static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr)
+{
+ char *p = (char *)vaddr + (nr ^ 31) / 8;
+ char retval;
+
+ __asm__ __volatile__ ("bchg %2,%1; sne %0"
+ : "=d" (retval), "+m" (*p)
+ : "di" (nr & 7));
+
+ return retval;
+}
+
+static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr)
+{
+ char retval;
+
+ __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0"
+ : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+ return retval;
+}
+
+#define change_bit(nr,vaddr) \
+ (__builtin_constant_p(nr) ? \
+ __constant_change_bit(nr, vaddr) : \
+ __generic_change_bit(nr, vaddr))
+
+static inline void __constant_change_bit(int nr, unsigned long *vaddr)
+{
+ char *p = (char *)vaddr + (nr ^ 31) / 8;
+ __asm__ __volatile__ ("bchg %1,%0"
+ : "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_change_bit(int nr, unsigned long *vaddr)
+{
+ __asm__ __volatile__ ("bfchg %1{%0:#1}"
+ : : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+static inline int test_bit(int nr, const unsigned long *vaddr)
+{
+ return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
+}
+
+static inline int find_first_zero_bit(const unsigned long *vaddr,
+ unsigned size)
+{
+ const unsigned long *p = vaddr;
+ int res = 32;
+ unsigned long num;
+
+ if (!size)
+ return 0;
+
+ size = (size + 31) >> 5;
+ while (!(num = ~*p++)) {
+ if (!--size)
+ goto out;
+ }
+
+ __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+ : "=d" (res) : "d" (num & -num));
+ res ^= 31;
+out:
+ return ((long)p - (long)vaddr - 4) * 8 + res;
+}
+
+static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
+ int offset)
+{
+ const unsigned long *p = vaddr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ unsigned long num = ~*p++ & (~0UL << bit);
+ offset -= bit;
+
+ /* Look for zero in first longword */
+ __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+ : "=d" (res) : "d" (num & -num));
+ if (res < 32)
+ return offset + (res ^ 31);
+ offset += 32;
+ }
+ /* No zero yet, search remaining full bytes for a zero */
+ res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8);
+ return offset + res;
+}
+
+static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
+{
+ const unsigned long *p = vaddr;
+ int res = 32;
+ unsigned long num;
+
+ if (!size)
+ return 0;
+
+ size = (size + 31) >> 5;
+ while (!(num = *p++)) {
+ if (!--size)
+ goto out;
+ }
+
+ __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+ : "=d" (res) : "d" (num & -num));
+ res ^= 31;
+out:
+ return ((long)p - (long)vaddr - 4) * 8 + res;
+}
+
+static inline int find_next_bit(const unsigned long *vaddr, int size,
+ int offset)
+{
+ const unsigned long *p = vaddr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ unsigned long num = *p++ & (~0UL << bit);
+ offset -= bit;
+
+ /* Look for one in first longword */
+ __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+ : "=d" (res) : "d" (num & -num));
+ if (res < 32)
+ return offset + (res ^ 31);
+ offset += 32;
+ }
+ /* No one yet, search remaining full bytes for a one */
+ res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8);
+ return offset + res;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+ int res;
+
+ __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+ : "=d" (res) : "d" (~word & -~word));
+ return res ^ 31;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+static inline int ffs(int x)
+{
+ int cnt;
+
+ asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x));
+
+ return 32 - cnt;
+}
+#define __ffs(x) (ffs(x) - 1)
+
+/*
+ * fls: find last bit set.
+ */
+
+static inline int fls(int x)
+{
+ int cnt;
+
+ asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x));
+
+ return 32 - cnt;
+}
+
+static inline int __fls(int x)
+{
+ return fls(x) - 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/* Bitmap functions for the minix filesystem */
+
+static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size)
+{
+ const unsigned short *p = vaddr, *addr = vaddr;
+ int res;
+ unsigned short num;
+
+ if (!size)
+ return 0;
+
+ size = (size >> 4) + ((size & 15) > 0);
+ while (*p++ == 0xffff)
+ {
+ if (--size == 0)
+ return (p - addr) << 4;
+ }
+
+ num = ~*--p;
+ __asm__ __volatile__ ("bfffo %1{#16,#16},%0"
+ : "=d" (res) : "d" (num & -num));
+ return ((p - addr) << 4) + (res ^ 31);
+}
+
+#define minix_test_and_set_bit(nr, addr) __test_and_set_bit((nr) ^ 16, (unsigned long *)(addr))
+#define minix_set_bit(nr,addr) __set_bit((nr) ^ 16, (unsigned long *)(addr))
+#define minix_test_and_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr))
+
+static inline int minix_test_bit(int nr, const void *vaddr)
+{
+ const unsigned short *p = vaddr;
+ return (p[nr >> 4] & (1U << (nr & 15))) != 0;
+}
+
+/* Bitmap functions for the ext2 filesystem. */
+
+#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+
+static inline int ext2_test_bit(int nr, const void *vaddr)
+{
+ const unsigned char *p = vaddr;
+ return (p[nr >> 3] & (1U << (nr & 7))) != 0;
+}
+
+static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
+{
+ const unsigned long *p = vaddr, *addr = vaddr;
+ int res;
+
+ if (!size)
+ return 0;
+
+ size = (size >> 5) + ((size & 31) > 0);
+ while (*p++ == ~0UL)
+ {
+ if (--size == 0)
+ return (p - addr) << 5;
+ }
+
+ --p;
+ for (res = 0; res < 32; res++)
+ if (!ext2_test_bit (res, p))
+ break;
+ return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
+ unsigned offset)
+{
+ const unsigned long *addr = vaddr;
+ const unsigned long *p = addr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ /* Look for zero in first longword */
+ for (res = bit; res < 32; res++)
+ if (!ext2_test_bit (res, p))
+ return (p - addr) * 32 + res;
+ p++;
+ }
+ /* No zero yet, search remaining full bytes for a zero */
+ res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
+ return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
+{
+ const unsigned long *p = vaddr, *addr = vaddr;
+ int res;
+
+ if (!size)
+ return 0;
+
+ size = (size >> 5) + ((size & 31) > 0);
+ while (*p++ == 0UL) {
+ if (--size == 0)
+ return (p - addr) << 5;
+ }
+
+ --p;
+ for (res = 0; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ break;
+ return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
+ unsigned offset)
+{
+ const unsigned long *addr = vaddr;
+ const unsigned long *p = addr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ /* Look for one in first longword */
+ for (res = bit; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ return (p - addr) * 32 + res;
+ p++;
+ }
+ /* No set bit yet, search remaining full bytes for a set bit */
+ res = ext2_find_first_bit(p, size - 32 * (p - addr));
+ return (p - addr) * 32 + res;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_BITOPS_H */
--- /dev/null
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h> /* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline int ffs(unsigned int val)
+{
+ if (!val)
+ return 0;
+
+ asm volatile(
+ "bitrev %0\n\t"
+ "ff1 %0\n\t"
+ : "=d" (val)
+ : "0" (val)
+ );
+ val++;
+ return val;
+}
+
+static inline int __ffs(unsigned int val)
+{
+ asm volatile(
+ "bitrev %0\n\t"
+ "ff1 %0\n\t"
+ : "=d" (val)
+ : "0" (val)
+ );
+ return val;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0", "cc");
+#else
+ __asm__ __volatile__ ("bset %1,%0"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0", "cc");
+#else
+ __asm__ __volatile__ ("bclr %1,%0"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0", "cc");
+#else
+ __asm__ __volatile__ ("bchg %1,%0"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bset %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bclr %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bchg %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+ int * a = (int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bset %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bclr %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ ({ \
+ int ret; \
+ spin_lock(lock); \
+ ret = ext2_set_bit((nr), (addr)); \
+ spin_unlock(lock); \
+ ret; \
+ })
+
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ ({ \
+ int ret; \
+ spin_lock(lock); \
+ ret = ext2_clear_bit((nr), (addr)); \
+ spin_unlock(lock); \
+ ret; \
+ })
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+ : "=d" (retval)
+ : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("btst %2,%1; sne %0"
+ : "=d" (retval)
+ : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+ ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+ unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+ unsigned long result = offset & ~31UL;
+ unsigned long tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if(offset) {
+ /* We hold the little endian value in tmp, but then the
+ * shift is illegal. So we could keep a big endian value
+ * in tmp, like this:
+ *
+ * tmp = __swab32(*(p++));
+ * tmp |= ~0UL >> (32-offset);
+ *
+ * but this would decrease performance, so we change the
+ * shift:
+ */
+ tmp = *(p++);
+ tmp |= __swab32(~0UL >> (32-offset));
+ if(size < 32)
+ goto found_first;
+ if(~tmp)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while(size & ~31UL) {
+ if(~(tmp = *(p++)))
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if(!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ /* tmp is little endian, so we would have to swab the shift,
+ * see above. But then we have to swab tmp below for ffz, so
+ * we might as well do this here.
+ */
+ return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+ return result + ffz(__swab32(tmp));
+}
+
+#define ext2_find_next_bit(addr, size, off) \
+ generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _M68KNOMMU_BITOPS_H */
--- /dev/null
+/*
+** asm/blinken.h -- m68k blinkenlights support (currently hp300 only)
+**
+** (c) 1998 Phil Blundell <philb@gnu.org>
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _M68K_BLINKEN_H
+#define _M68K_BLINKEN_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+#define HP300_LEDS 0xf001ffff
+
+extern unsigned char ledstate;
+
+static __inline__ void blinken_leds(int on, int off)
+{
+ if (MACH_IS_HP300)
+ {
+ ledstate |= on;
+ ledstate &= ~off;
+ out_8(HP300_LEDS, ~ledstate);
+ }
+}
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "bootinfo_no.h"
+#else
+#include "bootinfo_mm.h"
+#endif
--- /dev/null
+/*
+** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+** Added bi_atari part of the machine dependent union bi_un; for now it
+** contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+** Renamed to setup.h; added some useful macros to allow gcc some
+** optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+** Redesign of the boot information structure; renamed to bootinfo.h again
+** 27/11/96 Geert Uytterhoeven:
+** Backwards compatibility with bootinfo interface version 1.0
+*/
+
+#ifndef _M68K_BOOTINFO_H
+#define _M68K_BOOTINFO_H
+
+
+ /*
+ * Bootinfo definitions
+ *
+ * This is an easily parsable and extendable structure containing all
+ * information to be passed from the bootstrap to the kernel.
+ *
+ * This way I hope to keep all future changes back/forewards compatible.
+ * Thus, keep your fingers crossed...
+ *
+ * This structure is copied right after the kernel bss by the bootstrap
+ * routine.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct bi_record {
+ unsigned short tag; /* tag ID */
+ unsigned short size; /* size of record (in bytes) */
+ unsigned long data[0]; /* data */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+ /*
+ * Tag Definitions
+ *
+ * Machine independent tags start counting from 0x0000
+ * Machine dependent tags start counting from 0x8000
+ */
+
+#define BI_LAST 0x0000 /* last record (sentinel) */
+#define BI_MACHTYPE 0x0001 /* machine type (u_long) */
+#define BI_CPUTYPE 0x0002 /* cpu type (u_long) */
+#define BI_FPUTYPE 0x0003 /* fpu type (u_long) */
+#define BI_MMUTYPE 0x0004 /* mmu type (u_long) */
+#define BI_MEMCHUNK 0x0005 /* memory chunk address and size */
+ /* (struct mem_info) */
+#define BI_RAMDISK 0x0006 /* ramdisk address and size */
+ /* (struct mem_info) */
+#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */
+ /* (string) */
+
+ /*
+ * Amiga-specific tags
+ */
+
+#define BI_AMIGA_MODEL 0x8000 /* model (u_long) */
+#define BI_AMIGA_AUTOCON 0x8001 /* AutoConfig device */
+ /* (struct ConfigDev) */
+#define BI_AMIGA_CHIP_SIZE 0x8002 /* size of Chip RAM (u_long) */
+#define BI_AMIGA_VBLANK 0x8003 /* VBLANK frequency (u_char) */
+#define BI_AMIGA_PSFREQ 0x8004 /* power supply frequency (u_char) */
+#define BI_AMIGA_ECLOCK 0x8005 /* EClock frequency (u_long) */
+#define BI_AMIGA_CHIPSET 0x8006 /* native chipset present (u_long) */
+#define BI_AMIGA_SERPER 0x8007 /* serial port period (u_short) */
+
+ /*
+ * Atari-specific tags
+ */
+
+#define BI_ATARI_MCH_COOKIE 0x8000 /* _MCH cookie from TOS (u_long) */
+#define BI_ATARI_MCH_TYPE 0x8001 /* special machine type (u_long) */
+ /* (values are ATARI_MACH_* defines */
+
+/* mch_cookie values (upper word) */
+#define ATARI_MCH_ST 0
+#define ATARI_MCH_STE 1
+#define ATARI_MCH_TT 2
+#define ATARI_MCH_FALCON 3
+
+/* mch_type values */
+#define ATARI_MACH_NORMAL 0 /* no special machine type */
+#define ATARI_MACH_MEDUSA 1 /* Medusa 040 */
+#define ATARI_MACH_HADES 2 /* Hades 040 or 060 */
+#define ATARI_MACH_AB40 3 /* Afterburner040 on Falcon */
+
+ /*
+ * VME-specific tags
+ */
+
+#define BI_VME_TYPE 0x8000 /* VME sub-architecture (u_long) */
+#define BI_VME_BRDINFO 0x8001 /* VME board information (struct) */
+
+/* BI_VME_TYPE codes */
+#define VME_TYPE_TP34V 0x0034 /* Tadpole TP34V */
+#define VME_TYPE_MVME147 0x0147 /* Motorola MVME147 */
+#define VME_TYPE_MVME162 0x0162 /* Motorola MVME162 */
+#define VME_TYPE_MVME166 0x0166 /* Motorola MVME166 */
+#define VME_TYPE_MVME167 0x0167 /* Motorola MVME167 */
+#define VME_TYPE_MVME172 0x0172 /* Motorola MVME172 */
+#define VME_TYPE_MVME177 0x0177 /* Motorola MVME177 */
+#define VME_TYPE_BVME4000 0x4000 /* BVM Ltd. BVME4000 */
+#define VME_TYPE_BVME6000 0x6000 /* BVM Ltd. BVME6000 */
+
+/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on
+ * Motorola VME boards. Contains board number, Bug version, board
+ * configuration options, etc. See include/asm/mvme16xhw.h for details.
+ */
+
+
+ /*
+ * Macintosh-specific tags (all u_long)
+ */
+
+#define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */
+#define BI_MAC_VADDR 0x8001 /* Mac video base address */
+#define BI_MAC_VDEPTH 0x8002 /* Mac video depth */
+#define BI_MAC_VROW 0x8003 /* Mac video rowbytes */
+#define BI_MAC_VDIM 0x8004 /* Mac video dimensions */
+#define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */
+#define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */
+#define BI_MAC_BTIME 0x8007 /* Mac boot time */
+#define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */
+#define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */
+#define BI_MAC_CPUID 0x800a /* Mac CPU type (sanity check) */
+#define BI_MAC_ROMBASE 0x800b /* Mac system ROM base address */
+
+ /*
+ * Macintosh hardware profile data - unused, see macintosh.h for
+ * resonable type values
+ */
+
+#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */
+#define BI_MAC_VIA2BASE 0x8011 /* Mac VIA2 base address (type varies) */
+#define BI_MAC_VIA2TYPE 0x8012 /* Mac VIA2 type (VIA, RBV, OSS) */
+#define BI_MAC_ADBTYPE 0x8013 /* Mac ADB interface type */
+#define BI_MAC_ASCBASE 0x8014 /* Mac Apple Sound Chip base address */
+#define BI_MAC_SCSI5380 0x8015 /* Mac NCR 5380 SCSI (base address, multi) */
+#define BI_MAC_SCSIDMA 0x8016 /* Mac SCSI DMA (base address) */
+#define BI_MAC_SCSI5396 0x8017 /* Mac NCR 53C96 SCSI (base address, multi) */
+#define BI_MAC_IDETYPE 0x8018 /* Mac IDE interface type */
+#define BI_MAC_IDEBASE 0x8019 /* Mac IDE interface base address */
+#define BI_MAC_NUBUS 0x801a /* Mac Nubus type (none, regular, pseudo) */
+#define BI_MAC_SLOTMASK 0x801b /* Mac Nubus slots present */
+#define BI_MAC_SCCTYPE 0x801c /* Mac SCC serial type (normal, IOP) */
+#define BI_MAC_ETHTYPE 0x801d /* Mac builtin ethernet type (Sonic, MACE */
+#define BI_MAC_ETHBASE 0x801e /* Mac builtin ethernet base address */
+#define BI_MAC_PMU 0x801f /* Mac power management / poweroff hardware */
+#define BI_MAC_IOP_SWIM 0x8020 /* Mac SWIM floppy IOP */
+#define BI_MAC_IOP_ADB 0x8021 /* Mac ADB IOP */
+
+ /*
+ * Mac: compatibility with old booter data format (temporarily)
+ * Fields unused with the new bootinfo can be deleted now; instead of
+ * adding new fields the struct might be splitted into a hardware address
+ * part and a hardware type part
+ */
+
+#ifndef __ASSEMBLY__
+
+struct mac_booter_data
+{
+ unsigned long videoaddr;
+ unsigned long videorow;
+ unsigned long videodepth;
+ unsigned long dimensions;
+ unsigned long args;
+ unsigned long boottime;
+ unsigned long gmtbias;
+ unsigned long bootver;
+ unsigned long videological;
+ unsigned long sccbase;
+ unsigned long id;
+ unsigned long memsize;
+ unsigned long serialmf;
+ unsigned long serialhsk;
+ unsigned long serialgpi;
+ unsigned long printmf;
+ unsigned long printhsk;
+ unsigned long printgpi;
+ unsigned long cpuid;
+ unsigned long rombase;
+ unsigned long adbdelay;
+ unsigned long timedbra;
+};
+
+extern struct mac_booter_data
+ mac_bi_data;
+
+#endif
+
+ /*
+ * Apollo-specific tags
+ */
+
+#define BI_APOLLO_MODEL 0x8000 /* model (u_long) */
+
+ /*
+ * HP300-specific tags
+ */
+
+#define BI_HP300_MODEL 0x8000 /* model (u_long) */
+#define BI_HP300_UART_SCODE 0x8001 /* UART select code (u_long) */
+#define BI_HP300_UART_ADDR 0x8002 /* phys. addr of UART (u_long) */
+
+ /*
+ * Stuff for bootinfo interface versioning
+ *
+ * At the start of kernel code, a 'struct bootversion' is located.
+ * bootstrap checks for a matching version of the interface before booting
+ * a kernel, to avoid user confusion if kernel and bootstrap don't work
+ * together :-)
+ *
+ * If incompatible changes are made to the bootinfo interface, the major
+ * number below should be stepped (and the minor reset to 0) for the
+ * appropriate machine. If a change is backward-compatible, the minor
+ * should be stepped. "Backwards-compatible" means that booting will work,
+ * but certain features may not.
+ */
+
+#define BOOTINFOV_MAGIC 0x4249561A /* 'BIV^Z' */
+#define MK_BI_VERSION(major,minor) (((major)<<16)+(minor))
+#define BI_VERSION_MAJOR(v) (((v) >> 16) & 0xffff)
+#define BI_VERSION_MINOR(v) ((v) & 0xffff)
+
+#ifndef __ASSEMBLY__
+
+struct bootversion {
+ unsigned short branch;
+ unsigned long magic;
+ struct {
+ unsigned long machtype;
+ unsigned long version;
+ } machversions[0];
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AMIGA_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define ATARI_BOOTI_VERSION MK_BI_VERSION( 2, 1 )
+#define MAC_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define MVME147_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define MVME16x_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define Q40_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define HP300_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+
+#ifdef BOOTINFO_COMPAT_1_0
+
+ /*
+ * Backwards compatibility with bootinfo interface version 1.0
+ */
+
+#define COMPAT_AMIGA_BOOTI_VERSION MK_BI_VERSION( 1, 0 )
+#define COMPAT_ATARI_BOOTI_VERSION MK_BI_VERSION( 1, 0 )
+#define COMPAT_MAC_BOOTI_VERSION MK_BI_VERSION( 1, 0 )
+
+#include <linux/zorro.h>
+
+#define COMPAT_NUM_AUTO 16
+
+struct compat_bi_Amiga {
+ int model;
+ int num_autocon;
+ struct ConfigDev autocon[COMPAT_NUM_AUTO];
+ unsigned long chip_size;
+ unsigned char vblank;
+ unsigned char psfreq;
+ unsigned long eclock;
+ unsigned long chipset;
+ unsigned long hw_present;
+};
+
+struct compat_bi_Atari {
+ unsigned long hw_present;
+ unsigned long mch_cookie;
+};
+
+#ifndef __ASSEMBLY__
+
+struct compat_bi_Macintosh
+{
+ unsigned long videoaddr;
+ unsigned long videorow;
+ unsigned long videodepth;
+ unsigned long dimensions;
+ unsigned long args;
+ unsigned long boottime;
+ unsigned long gmtbias;
+ unsigned long bootver;
+ unsigned long videological;
+ unsigned long sccbase;
+ unsigned long id;
+ unsigned long memsize;
+ unsigned long serialmf;
+ unsigned long serialhsk;
+ unsigned long serialgpi;
+ unsigned long printmf;
+ unsigned long printhsk;
+ unsigned long printgpi;
+ unsigned long cpuid;
+ unsigned long rombase;
+ unsigned long adbdelay;
+ unsigned long timedbra;
+};
+
+#endif
+
+struct compat_mem_info {
+ unsigned long addr;
+ unsigned long size;
+};
+
+#define COMPAT_NUM_MEMINFO 4
+
+#define COMPAT_CPUB_68020 0
+#define COMPAT_CPUB_68030 1
+#define COMPAT_CPUB_68040 2
+#define COMPAT_CPUB_68060 3
+#define COMPAT_FPUB_68881 5
+#define COMPAT_FPUB_68882 6
+#define COMPAT_FPUB_68040 7
+#define COMPAT_FPUB_68060 8
+
+#define COMPAT_CPU_68020 (1<<COMPAT_CPUB_68020)
+#define COMPAT_CPU_68030 (1<<COMPAT_CPUB_68030)
+#define COMPAT_CPU_68040 (1<<COMPAT_CPUB_68040)
+#define COMPAT_CPU_68060 (1<<COMPAT_CPUB_68060)
+#define COMPAT_CPU_MASK (31)
+#define COMPAT_FPU_68881 (1<<COMPAT_FPUB_68881)
+#define COMPAT_FPU_68882 (1<<COMPAT_FPUB_68882)
+#define COMPAT_FPU_68040 (1<<COMPAT_FPUB_68040)
+#define COMPAT_FPU_68060 (1<<COMPAT_FPUB_68060)
+#define COMPAT_FPU_MASK (0xfe0)
+
+#define COMPAT_CL_SIZE (256)
+
+struct compat_bootinfo {
+ unsigned long machtype;
+ unsigned long cputype;
+ struct compat_mem_info memory[COMPAT_NUM_MEMINFO];
+ int num_memory;
+ unsigned long ramdisk_size;
+ unsigned long ramdisk_addr;
+ char command_line[COMPAT_CL_SIZE];
+ union {
+ struct compat_bi_Amiga bi_ami;
+ struct compat_bi_Atari bi_ata;
+ struct compat_bi_Macintosh bi_mac;
+ } bi_un;
+};
+
+#define bi_amiga bi_un.bi_ami
+#define bi_atari bi_un.bi_ata
+#define bi_mac bi_un.bi_mac
+
+#endif /* BOOTINFO_COMPAT_1_0 */
+
+
+#endif /* _M68K_BOOTINFO_H */
--- /dev/null
+
+/* Nothing for m68knommu */
--- /dev/null
+/* bootstd.h: Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21 /* last used bootloader system call */
+
+#define __BN_reset 0 /* reset and start the bootloader */
+#define __BN_test 1 /* tests the system call interface */
+#define __BN_exec 2 /* executes a bootloader image */
+#define __BN_exit 3 /* terminates a bootloader image */
+#define __BN_program 4 /* program FLASH from a chain */
+#define __BN_erase 5 /* erase sector(s) of FLASH */
+#define __BN_open 6
+#define __BN_write 7
+#define __BN_read 8
+#define __BN_close 9
+#define __BN_mmap 10 /* map a file descriptor into memory */
+#define __BN_munmap 11 /* remove a file to memory mapping */
+#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv 14 /* get a bootloader envvar */
+#define __BN_setbenv 15 /* get a bootloader envvar */
+#define __BN_setpmask 16 /* set the protection mask */
+#define __BN_readenv 17 /* read environment variables */
+#define __BN_flash_chattr_range 18
+#define __BN_flash_erase_range 19
+#define __BN_flash_write_range 20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+ if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+ /* let errno be a function, preserve res in %d0 */ \
+ int __err = -(res); \
+ errno = __err; \
+ res = -1; \
+ } \
+ return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ register long __c __asm__ ("%d3") = (long)c; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b), \
+ "d" (__c) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ register long __c __asm__ ("%d3") = (long)c; \
+ register long __d __asm__ ("%d4") = (long)d; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b), \
+ "d" (__c), "d" (__d) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ register long __c __asm__ ("%d3") = (long)c; \
+ register long __d __asm__ ("%d4") = (long)d; \
+ register long __e __asm__ ("%d5") = (long)e; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b), \
+ "d" (__c), "d" (__d), "d" (__e) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */
--- /dev/null
+#ifdef __uClinux__
+#include "bug_no.h"
+#else
+#include "bug_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_BUG_H
+#define _M68K_BUG_H
+
+
+#ifdef CONFIG_BUG
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#ifndef CONFIG_SUN3
+#define BUG() do { \
+ printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+ __builtin_trap(); \
+} while (0)
+#else
+#define BUG() do { \
+ printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+ panic("BUG!"); \
+} while (0)
+#endif
+#else
+#define BUG() do { \
+ __builtin_trap(); \
+} while (0)
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "bugs_no.h"
+#else
+#include "bugs_mm.h"
+#endif
--- /dev/null
+/*
+ * include/asm-m68k/bugs.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+
+extern void check_bugs(void); /* in arch/m68k/kernel/setup.c */
--- /dev/null
+/*
+ * include/asm-m68k/bugs.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
--- /dev/null
+#ifndef _M68K_BVME6000HW_H_
+#define _M68K_BVME6000HW_H_
+
+#include <asm/irq.h>
+
+/*
+ * PIT structure
+ */
+
+#define BVME_PIT_BASE 0xffa00000
+
+typedef struct {
+ unsigned char
+ pad_a[3], pgcr,
+ pad_b[3], psrr,
+ pad_c[3], paddr,
+ pad_d[3], pbddr,
+ pad_e[3], pcddr,
+ pad_f[3], pivr,
+ pad_g[3], pacr,
+ pad_h[3], pbcr,
+ pad_i[3], padr,
+ pad_j[3], pbdr,
+ pad_k[3], paar,
+ pad_l[3], pbar,
+ pad_m[3], pcdr,
+ pad_n[3], psr,
+ pad_o[3], res1,
+ pad_p[3], res2,
+ pad_q[3], tcr,
+ pad_r[3], tivr,
+ pad_s[3], res3,
+ pad_t[3], cprh,
+ pad_u[3], cprm,
+ pad_v[3], cprl,
+ pad_w[3], res4,
+ pad_x[3], crh,
+ pad_y[3], crm,
+ pad_z[3], crl,
+ pad_A[3], tsr,
+ pad_B[3], res5;
+} PitRegs_t, *PitRegsPtr;
+
+#define bvmepit ((*(volatile PitRegsPtr)(BVME_PIT_BASE)))
+
+#define BVME_RTC_BASE 0xff900000
+
+typedef struct {
+ unsigned char
+ pad_a[3], msr,
+ pad_b[3], t0cr_rtmr,
+ pad_c[3], t1cr_omr,
+ pad_d[3], pfr_icr0,
+ pad_e[3], irr_icr1,
+ pad_f[3], bcd_tenms,
+ pad_g[3], bcd_sec,
+ pad_h[3], bcd_min,
+ pad_i[3], bcd_hr,
+ pad_j[3], bcd_dom,
+ pad_k[3], bcd_mth,
+ pad_l[3], bcd_year,
+ pad_m[3], bcd_ujcc,
+ pad_n[3], bcd_hjcc,
+ pad_o[3], bcd_dow,
+ pad_p[3], t0lsb,
+ pad_q[3], t0msb,
+ pad_r[3], t1lsb,
+ pad_s[3], t1msb,
+ pad_t[3], cmp_sec,
+ pad_u[3], cmp_min,
+ pad_v[3], cmp_hr,
+ pad_w[3], cmp_dom,
+ pad_x[3], cmp_mth,
+ pad_y[3], cmp_dow,
+ pad_z[3], sav_sec,
+ pad_A[3], sav_min,
+ pad_B[3], sav_hr,
+ pad_C[3], sav_dom,
+ pad_D[3], sav_mth,
+ pad_E[3], ram,
+ pad_F[3], test;
+} RtcRegs_t, *RtcPtr_t;
+
+
+#define BVME_I596_BASE 0xff100000
+
+#define BVME_ETHIRQ_REG 0xff20000b
+
+#define BVME_LOCAL_IRQ_STAT 0xff20000f
+
+#define BVME_ETHERR 0x02
+#define BVME_ABORT_STATUS 0x08
+
+#define BVME_NCR53C710_BASE 0xff000000
+
+#define BVME_SCC_A_ADDR 0xffb0000b
+#define BVME_SCC_B_ADDR 0xffb00003
+#define BVME_SCC_RTxC 7372800
+
+#define BVME_CONFIG_REG 0xff500003
+
+#define config_reg_ptr (volatile unsigned char *)BVME_CONFIG_REG
+
+#define BVME_CONFIG_SW1 0x08
+#define BVME_CONFIG_SW2 0x04
+#define BVME_CONFIG_SW3 0x02
+#define BVME_CONFIG_SW4 0x01
+
+
+#define BVME_IRQ_TYPE_PRIO 0
+
+#define BVME_IRQ_PRN (IRQ_USER+20)
+#define BVME_IRQ_TIMER (IRQ_USER+25)
+#define BVME_IRQ_I596 IRQ_AUTO_2
+#define BVME_IRQ_SCSI IRQ_AUTO_3
+#define BVME_IRQ_RTC IRQ_AUTO_6
+#define BVME_IRQ_ABORT IRQ_AUTO_7
+
+/* SCC interrupts */
+#define BVME_IRQ_SCC_BASE IRQ_USER
+#define BVME_IRQ_SCCB_TX IRQ_USER
+#define BVME_IRQ_SCCB_STAT (IRQ_USER+2)
+#define BVME_IRQ_SCCB_RX (IRQ_USER+4)
+#define BVME_IRQ_SCCB_SPCOND (IRQ_USER+6)
+#define BVME_IRQ_SCCA_TX (IRQ_USER+8)
+#define BVME_IRQ_SCCA_STAT (IRQ_USER+10)
+#define BVME_IRQ_SCCA_RX (IRQ_USER+12)
+#define BVME_IRQ_SCCA_SPCOND (IRQ_USER+14)
+
+/* Address control registers */
+
+#define BVME_ACR_A32VBA 0xff400003
+#define BVME_ACR_A32MSK 0xff410003
+#define BVME_ACR_A24VBA 0xff420003
+#define BVME_ACR_A24MSK 0xff430003
+#define BVME_ACR_A16VBA 0xff440003
+#define BVME_ACR_A32LBA 0xff450003
+#define BVME_ACR_A24LBA 0xff460003
+#define BVME_ACR_ADDRCTL 0xff470003
+
+#define bvme_acr_a32vba *(volatile unsigned char *)BVME_ACR_A32VBA
+#define bvme_acr_a32msk *(volatile unsigned char *)BVME_ACR_A32MSK
+#define bvme_acr_a24vba *(volatile unsigned char *)BVME_ACR_A24VBA
+#define bvme_acr_a24msk *(volatile unsigned char *)BVME_ACR_A24MSK
+#define bvme_acr_a16vba *(volatile unsigned char *)BVME_ACR_A16VBA
+#define bvme_acr_a32lba *(volatile unsigned char *)BVME_ACR_A32LBA
+#define bvme_acr_a24lba *(volatile unsigned char *)BVME_ACR_A24LBA
+#define bvme_acr_addrctl *(volatile unsigned char *)BVME_ACR_ADDRCTL
+
+#endif
--- /dev/null
+#ifndef _M68K_BYTEORDER_H
+#define _M68K_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68K_BYTEORDER_H */
--- /dev/null
+#ifdef __uClinux__
+#include "cache_no.h"
+#else
+#include "cache_mm.h"
+#endif
--- /dev/null
+/*
+ * include/asm-m68k/cache.h
+ */
+#ifndef __ARCH_M68K_CACHE_H
+#define __ARCH_M68K_CACHE_H
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT 4
+#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT)
+
+#endif
--- /dev/null
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define L1_CACHE_BYTES 16 /* this need to be at least 1 */
+
+/* m68k-elf-gcc 2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
--- /dev/null
+#ifndef _M68K_CACHECTL_H
+#define _M68K_CACHECTL_H
+
+/* Definitions for the cacheflush system call. */
+
+#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */
+#define FLUSH_SCOPE_PAGE 2 /* Flush a page */
+#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */
+
+#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */
+#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */
+#define FLUSH_CACHE_BOTH 3 /* Flush both caches */
+
+#endif /* _M68K_CACHECTL_H */
--- /dev/null
+#ifdef __uClinux__
+#include "cacheflush_no.h"
+#else
+#include "cacheflush_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_CACHEFLUSH_H
+#define _M68K_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/* cache code */
+#define FLUSH_I_AND_D (0x00000808)
+#define FLUSH_I (0x00000008)
+
+/*
+ * Cache handling functions
+ */
+
+static inline void flush_icache(void)
+{
+ if (CPU_IS_040_OR_060)
+ asm volatile ( "nop\n"
+ " .chip 68040\n"
+ " cpusha %bc\n"
+ " .chip 68k");
+ else {
+ unsigned long tmp;
+ asm volatile ( "movec %%cacr,%0\n"
+ " or.w %1,%0\n"
+ " movec %0,%%cacr"
+ : "=&d" (tmp)
+ : "id" (FLUSH_I));
+ }
+}
+
+/*
+ * invalidate the cache for the specified memory range.
+ * It starts at the physical address specified for
+ * the given number of bytes.
+ */
+extern void cache_clear(unsigned long paddr, int len);
+/*
+ * push any dirty cache in the specified memory range.
+ * It starts at the physical address specified for
+ * the given number of bytes.
+ */
+extern void cache_push(unsigned long paddr, int len);
+
+/*
+ * push and invalidate pages in the specified user virtual
+ * memory range.
+ */
+extern void cache_push_v(unsigned long vaddr, int len);
+
+/* This is needed whenever the virtual mapping of the current
+ process changes. */
+#define __flush_cache_all() \
+({ \
+ if (CPU_IS_040_OR_060) \
+ __asm__ __volatile__("nop\n\t" \
+ ".chip 68040\n\t" \
+ "cpusha %dc\n\t" \
+ ".chip 68k"); \
+ else { \
+ unsigned long _tmp; \
+ __asm__ __volatile__("movec %%cacr,%0\n\t" \
+ "orw %1,%0\n\t" \
+ "movec %0,%%cacr" \
+ : "=&d" (_tmp) \
+ : "di" (FLUSH_I_AND_D)); \
+ } \
+})
+
+#define __flush_cache_030() \
+({ \
+ if (CPU_IS_020_OR_030) { \
+ unsigned long _tmp; \
+ __asm__ __volatile__("movec %%cacr,%0\n\t" \
+ "orw %1,%0\n\t" \
+ "movec %0,%%cacr" \
+ : "=&d" (_tmp) \
+ : "di" (FLUSH_I_AND_D)); \
+ } \
+})
+
+#define flush_cache_all() __flush_cache_all()
+
+#define flush_cache_vmap(start, end) flush_cache_all()
+#define flush_cache_vunmap(start, end) flush_cache_all()
+
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+ if (mm == current->mm)
+ __flush_cache_030();
+}
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/* flush_cache_range/flush_cache_page must be macros to avoid
+ a dependency on linux/mm.h, which includes this file... */
+static inline void flush_cache_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end)
+{
+ if (vma->vm_mm == current->mm)
+ __flush_cache_030();
+}
+
+static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
+{
+ if (vma->vm_mm == current->mm)
+ __flush_cache_030();
+}
+
+
+/* Push the page at kernel virtual address and clear the icache */
+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+static inline void __flush_page_to_ram(void *vaddr)
+{
+ if (CPU_IS_040_OR_060) {
+ __asm__ __volatile__("nop\n\t"
+ ".chip 68040\n\t"
+ "cpushp %%bc,(%0)\n\t"
+ ".chip 68k"
+ : : "a" (__pa(vaddr)));
+ } else {
+ unsigned long _tmp;
+ __asm__ __volatile__("movec %%cacr,%0\n\t"
+ "orw %1,%0\n\t"
+ "movec %0,%%cacr"
+ : "=&d" (_tmp)
+ : "di" (FLUSH_I));
+ }
+}
+
+#define flush_dcache_page(page) __flush_page_to_ram(page_address(page))
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page))
+
+extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ unsigned long addr, int len);
+extern void flush_icache_range(unsigned long address, unsigned long endaddr);
+
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr,
+ void *dst, void *src, int len)
+{
+ flush_cache_page(vma, vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+ flush_icache_user_range(vma, page, vaddr, len);
+}
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr,
+ void *dst, void *src, int len)
+{
+ flush_cache_page(vma, vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+}
+
+#endif /* _M68K_CACHEFLUSH_H */
--- /dev/null
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all() __flush_cache_all()
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) __flush_cache_all()
+#define flush_cache_page(vma, vmaddr) do { } while (0)
+#define flush_dcache_range(start,len) __flush_cache_all()
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_icache_range(start,len) __flush_cache_all()
+#define flush_icache_page(vma,pg) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+static inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+ /*
+ * Use cpushl to push and invalidate all cache lines.
+ * Gas doesn't seem to know how to generate the ColdFire
+ * cpushl instruction... Oh well, bit stuff it for now.
+ */
+ __asm__ __volatile__ (
+ "nop\n\t"
+ "clrl %%d0\n\t"
+ "1:\n\t"
+ "movel %%d0,%%a0\n\t"
+ "2:\n\t"
+ ".word 0xf468\n\t"
+ "addl #0x10,%%a0\n\t"
+ "cmpl #0x00000800,%%a0\n\t"
+ "blt 2b\n\t"
+ "addql #1,%%d0\n\t"
+ "cmpil #4,%%d0\n\t"
+ "bne 1b\n\t"
+ "movel #0xb6088500,%%d0\n\t"
+ "movec %%d0,%%CACR\n\t"
+ : : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+ __asm__ __volatile__ (
+ "movel #0x81400100, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M523x || CONFIG_M527x */
+#if defined(CONFIG_M528x)
+ __asm__ __volatile__ (
+ "movel #0x81000200, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M528x */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+ __asm__ __volatile__ (
+ "movel #0x81000100, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+#ifdef CONFIG_M5249
+ __asm__ __volatile__ (
+ "movel #0xa1000200, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M5249 */
+#ifdef CONFIG_M532x
+ __asm__ __volatile__ (
+ "movel #0x81000200, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M532x */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */
--- /dev/null
+#ifdef __uClinux__
+#include "checksum_no.h"
+#else
+#include "checksum_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst,
+ int len, __wsum sum,
+ int *csum_err);
+
+extern __wsum csum_partial_copy_nocheck(const void *src,
+ void *dst, int len,
+ __wsum sum);
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ *
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ unsigned int sum = 0;
+ unsigned long tmp;
+
+ __asm__ ("subqw #1,%2\n"
+ "1:\t"
+ "movel %1@+,%3\n\t"
+ "addxl %3,%0\n\t"
+ "dbra %2,1b\n\t"
+ "movel %0,%3\n\t"
+ "swap %3\n\t"
+ "addxw %3,%0\n\t"
+ "clrw %3\n\t"
+ "addxw %3,%0\n\t"
+ : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
+ : "0" (sum), "1" (iph), "2" (ihl)
+ : "memory");
+ return (__force __sum16)~sum;
+}
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned int tmp = (__force u32)sum;
+ __asm__("swap %1\n\t"
+ "addw %1, %0\n\t"
+ "clrw %1\n\t"
+ "addxw %1, %0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "0" (sum), "1" (tmp));
+ return (__force __sum16)~sum;
+}
+
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ __asm__ ("addl %2,%0\n\t"
+ "addxl %3,%0\n\t"
+ "addxl %4,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=d" (saddr)
+ : "g" (daddr), "1" (saddr), "d" (len + proto),
+ "0" (sum));
+ return sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ register unsigned long tmp;
+ __asm__("addl %2@,%0\n\t"
+ "movel %2@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@,%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "addxl %4,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "a" (saddr), "a" (daddr), "d" (len + proto),
+ "0" (sum));
+
+ return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
--- /dev/null
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned int tmp = (__force u32)sum;
+#ifdef CONFIG_COLDFIRE
+ tmp = (tmp & 0xffff) + (tmp >> 16);
+ tmp = (tmp & 0xffff) + (tmp >> 16);
+ return (__force __sum16)~tmp;
+#else
+ __asm__("swap %1\n\t"
+ "addw %1, %0\n\t"
+ "clrw %1\n\t"
+ "addxw %1, %0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "0" (sum), "1" (sum));
+ return (__force __sum16)~sum;
+#endif
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ __asm__ ("addl %1,%0\n\t"
+ "addxl %4,%0\n\t"
+ "addxl %5,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=&d" (saddr)
+ : "0" (daddr), "1" (saddr), "d" (len + proto),
+ "d"(sum));
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ register unsigned long tmp;
+ __asm__("addl %2@,%0\n\t"
+ "movel %2@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@,%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "addxl %4,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "a" (saddr), "a" (daddr), "d" (len + proto),
+ "0" (sum));
+
+ return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef coldfire_h
+#define coldfire_h
+/****************************************************************************/
+
+
+/*
+ * Define master clock frequency. This is essentially done at config
+ * time now. No point enumerating dozens of possible clock options
+ * here. Also the peripheral clock (bus clock) divide ratio is set
+ * at config time too.
+ */
+#ifdef CONFIG_CLOCK_SET
+#define MCF_CLK CONFIG_CLOCK_FREQ
+#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ * Define the processor support peripherals base address.
+ * This is generally setup by the boards start up code.
+ */
+#define MCF_MBAR 0x10000000
+#define MCF_MBAR2 0x80000000
+#if defined(CONFIG_M520x)
+#define MCF_IPSBAR 0xFC000000
+#else
+#define MCF_IPSBAR 0x40000000
+#endif
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M520x)
+#undef MCF_MBAR
+#define MCF_MBAR MCF_IPSBAR
+#elif defined(CONFIG_M532x)
+#undef MCF_MBAR
+#define MCF_MBAR 0x00000000
+#endif
+
+/****************************************************************************/
+#endif /* coldfire_h */
--- /dev/null
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels. Some CPM control and status is available
+ * through the 68360 internal memory map. See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space. The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+
+/* CPM Command register masks: */
+#define CPM_CR_RST ((ushort)0x8000)
+#define CPM_CR_OPCODE ((ushort)0x0f00)
+#define CPM_CR_CHAN ((ushort)0x00f0)
+#define CPM_CR_FLG ((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX ((ushort)0x0005)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009)
+#define CPM_CR_GCI_ABORT ((ushort)0x000a)
+#define CPM_CR_RESET_BCS ((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1 ((ushort)0x0000)
+#define CPM_CR_CH_SCC2 ((ushort)0x0004)
+#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */
+#define CPM_CR_CH_TMR ((ushort)0x0005)
+#define CPM_CR_CH_SCC3 ((ushort)0x0008)
+#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1 ((ushort)0x0009)
+#define CPM_CR_CH_SCC4 ((ushort)0x000c)
+#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2 ((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+ * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional. Some areas can be (and are
+ * being) used for microcode. There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE ((uint)0x0000)
+#define CPM_DATAONLY_SIZE ((uint)0x0800)
+#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */
+extern QUICC *pquicc;
+uint m360_cpm_dpalloc(uint size);
+/* void *m360_cpm_hostalloc(uint size); */
+void m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */
+
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */
+
+#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */
+#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */
+
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */
+
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_UN ((ushort)0x0002) /* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so
+ * instead, we need only a parameter ram `slot' */
+
+#define PRSLOT_SCC1 0
+#define PRSLOT_SCC2 1
+#define PRSLOT_SCC3 2
+#define PRSLOT_SMC1 2
+#define PRSLOT_SCC4 3
+#define PRSLOT_SMC2 3
+
+
+/* #define PROFF_SCC1 ((uint)0x0000) */
+/* #define PROFF_SCC2 ((uint)0x0100) */
+/* #define PROFF_SCC3 ((uint)0x0200) */
+/* #define PROFF_SMC1 ((uint)0x0280) */
+/* #define PROFF_SCC4 ((uint)0x0300) */
+/* #define PROFF_SMC2 ((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer. It is half duplex, in that
+ * it can only receive or transmit. The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+ ushort scent_rbase;
+ ushort scent_tbase;
+ u_char scent_cfcr;
+ u_char scent_smask;
+ ushort scent_mrblr;
+ uint scent_rstate;
+ uint scent_r_ptr;
+ ushort scent_rbptr;
+ ushort scent_r_cnt;
+ uint scent_rtemp;
+ uint scent_tstate;
+ uint scent_t_ptr;
+ ushort scent_tbptr;
+ ushort scent_t_cnt;
+ uint scent_ttemp;
+ ushort scent_max_sl;
+ ushort scent_sl_cnt;
+ ushort scent_character1;
+ ushort scent_character2;
+ ushort scent_character3;
+ ushort scent_character4;
+ ushort scent_character5;
+ ushort scent_character6;
+ ushort scent_character7;
+ ushort scent_character8;
+ ushort scent_rccm;
+ ushort scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F ((u_char)0x08)
+#define SMC_CENT_PE ((u_char)0x04)
+#define SMC_CENT_S ((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
+#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
+#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ * 68360 - lxt905
+ * PA0/RXD1 - rxd
+ * PA1/TXD1 - txd
+ * PA8/CLK1 - tclk
+ * PA9/CLK2 - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1 - cd
+ */
+#define PA_ENET_RXD PA_RXD1
+#define PA_ENET_TXD PA_TXD1
+#define PA_ENET_TCLK PA_CLK1
+#define PA_ENET_RCLK PA_CLK2
+#define PC_ENET_TENA PC_RTS1
+#define PC_ENET_CLSN PC_CTS1
+#define PC_ENET_RENA PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
+ * to the MBX860 board. Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD ((ushort)0x0001)
+#define PA_ENET_TXD ((ushort)0x0002)
+#define PA_ENET_TCLK ((ushort)0x0200)
+#define PA_ENET_RCLK ((ushort)0x0800)
+#define PC_ENET_TENA ((ushort)0x0001)
+#define PC_ENET_CLSN ((ushort)0x0010)
+#define PC_ENET_RENA ((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD ((ushort)0x0004)
+#define PA_ENET_TXD ((ushort)0x0008)
+#define PA_ENET_TCLK ((ushort)0x0200)
+#define PA_ENET_RCLK ((ushort)0x0800)
+#define PB_ENET_TENA ((uint)0x00002000)
+#define PC_ENET_CLSN ((ushort)0x0040)
+#define PC_ENET_RENA ((ushort)0x0080)
+
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD ((ushort)0x0004)
+#define PA_ENET_TXD ((ushort)0x0008)
+#define PA_ENET_TCLK ((ushort)0x0100)
+#define PA_ENET_RCLK ((ushort)0x0200)
+#define PB_ENET_TENA ((uint)0x00002000)
+#define PC_ENET_CLSN ((ushort)0x0040)
+#define PC_ENET_RENA ((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP ((uint)0x00000004)
+#define PB_BSE_FDXDIS ((uint)0x00008000)
+#define PC_BSE_LOOPBACK ((ushort)0x0800)
+
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002c00)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC ((ushort)0x8000)
+#define SCU_PMSR_SL ((ushort)0x4000)
+#define SCU_PMSR_CL ((ushort)0x3000)
+#define SCU_PMSR_UM ((ushort)0x0c00)
+#define SCU_PMSR_FRZ ((ushort)0x0200)
+#define SCU_PMSR_RZS ((ushort)0x0100)
+#define SCU_PMSR_SYN ((ushort)0x0080)
+#define SCU_PMSR_DRT ((ushort)0x0040)
+#define SCU_PMSR_PEN ((ushort)0x0010)
+#define SCU_PMSR_RPM ((ushort)0x000c)
+#define SCU_PMSR_REVP ((ushort)0x0008)
+#define SCU_PMSR_TPM ((ushort)0x0003)
+#define SCU_PMSR_TEVP ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+
+
+/* CPM interrupts. There are nearly 32 interrupts generated by CPM
+ * channels or devices. All of these are presented to the PPC core
+ * as a single interrupt. The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler. We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR 32 */
+/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */
+/* #define CPMVEC_SCC1 ((ushort)0x1e) */
+/* #define CPMVEC_SCC2 ((ushort)0x1d) */
+/* #define CPMVEC_SCC3 ((ushort)0x1c) */
+/* #define CPMVEC_SCC4 ((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */
+/* #define CPMVEC_TIMER1 ((ushort)0x19) */
+/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */
+/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
+/* #define CPMVEC_IDMA1 ((ushort)0x15) */
+/* #define CPMVEC_IDMA2 ((ushort)0x14) */
+/* #define CPMVEC_TIMER2 ((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
+/* #define CPMVEC_I2C ((ushort)0x10) */
+/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */
+/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */
+/* #define CPMVEC_TIMER4 ((ushort)0x07) */
+/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */
+/* #define CPMVEC_SPI ((ushort)0x05) */
+/* #define CPMVEC_SMC1 ((ushort)0x04) */
+/* #define CPMVEC_SMC2 ((ushort)0x03) */
+/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */
+/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */
+/* #define CPMVEC_ERROR ((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
+#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
+#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
+#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
+#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
+#define CICR_IEN ((uint)0x00000080) /* Int. enable */
+#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
+#endif /* __CPM_360__ */
--- /dev/null
+#ifndef _M68K_CONTREGS_H
+#define _M68K_CONTREGS_H
+
+/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address
+ * space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+ 4=sun4 (as in sun4 sysmaint student book)
+ c=sun4c (according to davem) */
+
+#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */
+#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */
+#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */
+#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */
+#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */
+#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */
+#define AC_SYNC_ERR 0x60000000 /* c fault type */
+#define AC_SYNC_VA 0x60000004 /* c fault virtual address */
+#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */
+#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */
+#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */
+#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */
+#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */
+#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */
+#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */
+#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */
+#define AC_M_PCR 0x0000 /* shv Processor Control Reg */
+#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */
+#define AC_M_CXR 0x0200 /* shv Context Register */
+#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */
+#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */
+#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */
+#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */
+#define AC_M_RESET 0x0700 /* hv Reset Reg */
+#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */
+#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */
+#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */
+#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */
+#define AC_M_ITR 0x1300 /* hv Index Tag Register */
+#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */
+#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */
+#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */
+#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */
+#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */
+#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */
+
+#endif /* _M68K_CONTREGS_H */
--- /dev/null
+#ifndef __M68K_CPUTIME_H
+#define __M68K_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68K_CPUTIME_H */
--- /dev/null
+#ifdef __uClinux__
+#include "current_no.h"
+#else
+#include "current_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_CURRENT_H
+#define _M68K_CURRENT_H
+
+register struct task_struct *current __asm__("%a2");
+
+#endif /* !(_M68K_CURRENT_H) */
--- /dev/null
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ * current.h
+ * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * rather than dedicate a register (as the m68k source does), we
+ * just keep a global, we should probably just change it all to be
+ * current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+ return(current_thread_info()->task);
+}
+
+#define current get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */
--- /dev/null
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "delay_no.h"
+#else
+#include "delay_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_DELAY_H
+#define _M68K_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ */
+
+static inline void __delay(unsigned long loops)
+{
+ __asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
+ : "=d" (loops) : "0" (loops));
+}
+
+extern void __bad_udelay(void);
+
+/*
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+static inline void __const_udelay(unsigned long xloops)
+{
+ unsigned long tmp;
+
+ __asm__ ("mulul %2,%0:%1"
+ : "=d" (xloops), "=d" (tmp)
+ : "d" (xloops), "1" (loops_per_jiffy));
+ __delay(xloops * HZ);
+}
+
+static inline void __udelay(unsigned long usecs)
+{
+ __const_udelay(usecs * 4295); /* 2**32 / 1000000 */
+}
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+ ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \
+ __udelay(n))
+
+static inline unsigned long muldiv(unsigned long a, unsigned long b,
+ unsigned long c)
+{
+ unsigned long tmp;
+
+ __asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
+ : "=d" (tmp), "=d" (a)
+ : "d" (b), "d" (c), "1" (a));
+ return a;
+}
+
+#endif /* defined(_M68K_DELAY_H) */
--- /dev/null
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+ /* The coldfire runs this loop at significantly different speeds
+ * depending upon long word alignment or not. We'll pad it to
+ * long word alignment which is the faster version.
+ * The 0x4a8e is of course a 'tstl %fp' instruction. This is better
+ * than using a NOP (0x4e71) instruction because it executes in one
+ * cycle not three and doesn't allow for an arbitary delay waiting
+ * for bus cycles to finish. Also fp/a6 isn't likely to cause a
+ * stall waiting for the register to become valid if such is added
+ * to the coldfire at some stage.
+ */
+ __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t"
+ "1: subql #1, %0\n\t"
+ "jcc 1b"
+ : "=d" (loops) : "0" (loops));
+#else
+ __asm__ __volatile__ ( "1: subql #1, %0\n\t"
+ "jcc 1b"
+ : "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ * Ideally we use a 32*32->64 multiply to calculate the number of
+ * loop iterations, but the older standard 68k and ColdFire do not
+ * have this instruction. So for them we have a clsoe approximation
+ * loop using 32*32->32 multiplies only. This calculation based on
+ * the ARM version of delay.
+ *
+ * We want to implement:
+ *
+ * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define HZSCALE (268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+ defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+ defined(CONFIG_COLDFIRE)
+ __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+ unsigned long tmp;
+
+ usecs *= 4295; /* 2**32 / 1000000 */
+ __asm__ ("mulul %2,%0:%1"
+ : "=d" (usecs), "=d" (tmp)
+ : "d" (usecs), "1" (loops_per_jiffy*HZ));
+ __delay(usecs);
+#endif
+}
+
+/*
+ * Moved the udelay() function into library code, no longer inlined.
+ * I had to change the algorithm because we are overflowing now on
+ * the faster ColdFire parts. The code is a little bigger, so it makes
+ * sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */
--- /dev/null
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
--- /dev/null
+#ifdef __uClinux__
+#include "div64_no.h"
+#else
+#include "div64_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_DIV64_H
+#define _M68K_DIV64_H
+
+#include <linux/types.h>
+
+/* n = n / base; return rem; */
+
+#define do_div(n, base) ({ \
+ union { \
+ unsigned long n32[2]; \
+ unsigned long long n64; \
+ } __n; \
+ unsigned long __rem, __upper; \
+ \
+ __n.n64 = (n); \
+ if ((__upper = __n.n32[0])) { \
+ asm ("divul.l %2,%1:%0" \
+ : "=d" (__n.n32[0]), "=d" (__upper) \
+ : "d" (base), "0" (__n.n32[0])); \
+ } \
+ asm ("divu.l %2,%1:%0" \
+ : "=d" (__n.n32[1]), "=d" (__rem) \
+ : "d" (base), "1" (__upper), "0" (__n.n32[1])); \
+ (n) = __n.n64; \
+ __rem; \
+})
+
+#endif /* _M68K_DIV64_H */
--- /dev/null
+#include <asm-generic/div64.h>
--- /dev/null
+#ifdef __uClinux__
+#include "dma-mapping_no.h"
+#else
+#include "dma-mapping_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_DMA_MAPPING_H
+#define _M68K_DMA_MAPPING_H
+
+#include <asm/cache.h>
+
+struct scatterlist;
+
+#ifndef CONFIG_MMU_SUN3
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+ return 0;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+ return 1 << L1_CACHE_SHIFT;
+}
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+extern void *dma_alloc_coherent(struct device *, size_t,
+ dma_addr_t *, gfp_t);
+extern void dma_free_coherent(struct device *, size_t,
+ void *, dma_addr_t);
+
+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t flag)
+{
+ return dma_alloc_coherent(dev, size, handle, flag);
+}
+static inline void dma_free_noncoherent(struct device *dev, size_t size,
+ void *addr, dma_addr_t handle)
+{
+ dma_free_coherent(dev, size, addr, handle);
+}
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ /* we use coherent allocation, so not much to do here. */
+}
+
+extern dma_addr_t dma_map_single(struct device *, void *, size_t,
+ enum dma_data_direction);
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+}
+
+extern dma_addr_t dma_map_page(struct device *, struct page *,
+ unsigned long, size_t size,
+ enum dma_data_direction);
+static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
+ size_t size, enum dma_data_direction dir)
+{
+}
+
+extern int dma_map_sg(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction dir)
+{
+}
+
+extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
+ enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ /* just sync everything for now */
+ dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ /* just sync everything for now */
+ dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
+{
+ return 0;
+}
+
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif /* _M68K_DMA_MAPPING_H */
--- /dev/null
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#include <asm-generic/dma-mapping-broken.h>
+
+#endif /* _M68KNOMMU_DMA_MAPPING_H */
--- /dev/null
+#ifdef __uClinux__
+#include "dma_no.h"
+#else
+#include "dma_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+
+/* it's useless on the m68k, but unfortunately needed by the new
+ bootmem allocator (but this should do it for this) */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#define MAX_DMA_CHANNELS 8
+
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+#define isa_dma_bridge_buggy (0)
+
+#endif /* _M68K_DMA_H */
--- /dev/null
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+//#define DMA_DEBUG 1
+
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
+ * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ * Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+ defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ 0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE 1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD 2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD 3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG 4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG 5
+/* I/O to memory, 8 bits, single-address-mode */
+#define DMA_MODE_READ_SINGLE 8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE 9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE 10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE 12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF 0x01
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF 0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG 0x00
+#define DMA_MODE_SIZE_BYTE 0x01
+#define DMA_MODE_SIZE_WORD 0x02
+#define DMA_MODE_SIZE_LINE 0x03
+
+/*
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+ volatile unsigned char *dmapb;
+
+#ifdef DMA_DEBUG
+ printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+ /* Turn off external requests, and stop any DMA in progress */
+ dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+ dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+ volatile unsigned char *dmabp;
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+ dmabp = (unsigned char *) dma_base_addr[dmanr];
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+ // Clear config errors
+ dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+
+ // Set command register
+ dmawp[MCFDMA_DCR] =
+ MCFDMA_DCR_INT | // Enable completion irq
+ MCFDMA_DCR_CS | // Force one xfer per request
+ MCFDMA_DCR_AA | // Enable auto alignment
+ // single-address-mode
+ ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+ // sets s_rw (-> r/w) high if Memory to I/0
+ ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+ // Memory to I/O or I/O to Memory
+ ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+ // 32 bit, 16 bit or 8 bit transfers
+ ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
+ ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+ MCFDMA_DCR_SSIZE_BYTE)) |
+ ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
+ ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+ MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+ dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+ (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ volatile unsigned short *dmawp;
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ // Determine which address registers are used for memory/device accesses
+ if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+ // Source incrementing, must be memory
+ dmalp[MCFDMA_SAR] = a;
+ // Set dest address, must be device
+ dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+ } else {
+ // Destination incrementing, must be memory
+ dmalp[MCFDMA_DAR] = a;
+ // Set source address, must be device
+ dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+ }
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+ __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+ (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+ (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+ printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+ unsigned short count;
+
+#ifdef DMA_DEBUG
+ printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ count = dmawp[MCFDMA_BCR];
+ return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping. For instance, with the exception of the 16-bit
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA. All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose. This puts a crimp in distinguishing between the 'device
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value. Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit. Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ /* Turn off external requests, and stop any DMA in progress */
+ dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+ volatile unsigned int *dmalp;
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+ // Clear config errors
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+
+ // Set command register
+ dmalp[MCFDMA_DMR] =
+ MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
+ MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
+ MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
+ // source static-address-mode
+ ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+ // dest static-address-mode
+ ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+ // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+ (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+ (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+
+ dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+ dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+ (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ // Determine which address registers are used for memory/device accesses
+ if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+ // Source incrementing, must be memory
+ dmalp[MCFDMA_DSAR] = a;
+ // Set dest address, must be device
+ dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+ } else {
+ // Destination incrementing, must be memory
+ dmalp[MCFDMA_DDAR] = a;
+ // Set source address, must be device
+ dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+ }
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+ __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+ (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+ (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+ printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+ unsigned int count;
+
+#ifdef DMA_DEBUG
+ printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ count = dmalp[MCFDMA_DBCR];
+ return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+ occurrence should be flagged as an error. */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+#endif /* _M68K_DMA_H */
--- /dev/null
+/*
+ * linux/include/asm-m68k/dsp56k.h - defines and declarations for
+ * DSP56k device driver
+ *
+ * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+
+/* Used for uploading DSP binary code */
+struct dsp56k_upload {
+ int len;
+ char __user *bin;
+};
+
+/* For the DSP host flags */
+struct dsp56k_host_flags {
+ int dir; /* Bit field. 1 = write output bit, 0 = do nothing.
+ * 0x0000 means reading only, 0x0011 means
+ * writing the bits stored in `out' on HF0 and HF1.
+ * Note that HF2 and HF3 can only be read.
+ */
+ int out; /* Bit field like above. */
+ int status; /* Host register's current state is returned */
+};
+
+/* ioctl command codes */
+#define DSP56K_UPLOAD 1 /* Upload DSP binary program */
+#define DSP56K_SET_TX_WSIZE 2 /* Host transmit word size (1-4) */
+#define DSP56K_SET_RX_WSIZE 3 /* Host receive word size (1-4) */
+#define DSP56K_HOST_FLAGS 4 /* Host flag registers */
+#define DSP56K_HOST_CMD 5 /* Trig Host Command (0-31) */
--- /dev/null
+/*
+ * include/asm-m68k/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Hacked to fit Sun3x needs by Thomas Bogendoerfer
+ */
+
+#ifndef __M68K_DVMA_H
+#define __M68K_DVMA_H
+
+
+#define DVMA_PAGE_SHIFT 13
+#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT)
+#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1))
+#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE)
+
+extern void dvma_init(void);
+extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
+ int len);
+
+#define dvma_malloc(x) dvma_malloc_align(x, 0)
+#define dvma_map(x, y) dvma_map_align(x, y, 0)
+#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff)
+#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff)
+extern unsigned long dvma_map_align(unsigned long kaddr, int len,
+ int align);
+extern void *dvma_malloc_align(unsigned long len, unsigned long align);
+
+extern void dvma_unmap(void *baddr);
+extern void dvma_free(void *vaddr);
+
+
+#ifdef CONFIG_SUN3
+/* sun3 dvma page support */
+
+/* memory and pmegs potentially reserved for dvma */
+#define DVMA_PMEG_START 10
+#define DVMA_PMEG_END 16
+#define DVMA_START 0xf00000
+#define DVMA_END 0xfe0000
+#define DVMA_SIZE (DVMA_END-DVMA_START)
+#define IOMMU_TOTAL_ENTRIES 128
+#define IOMMU_ENTRIES 120
+
+/* empirical kludge -- dvma regions only seem to work right on 0x10000
+ byte boundaries */
+#define DVMA_REGION_SIZE 0x10000
+#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \
+ ~(DVMA_REGION_SIZE-1))
+
+/* virt <-> phys conversions */
+#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff)
+#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000)
+#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff)
+#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000)
+#define dvma_vtob(x) dvma_vtop(x)
+#define dvma_btov(x) dvma_ptov(x)
+
+static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
+ int len)
+{
+ return 0;
+}
+
+#else /* Sun3x */
+
+/* sun3x dvma page support */
+
+#define DVMA_START 0x0
+#define DVMA_END 0xf00000
+#define DVMA_SIZE (DVMA_END-DVMA_START)
+#define IOMMU_TOTAL_ENTRIES 2048
+/* the prom takes the top meg */
+#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80)
+
+#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff)
+#define dvma_btov(x) ((unsigned long)(x) | 0xff000000)
+
+extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len);
+
+
+
+/* everything below this line is specific to dma used for the onboard
+ ESP scsi on sun3x */
+
+/* Structure to describe the current status of DMA registers on the Sparc */
+struct sparc_dma_registers {
+ __volatile__ unsigned long cond_reg; /* DMA condition register */
+ __volatile__ unsigned long st_addr; /* Start address of this transfer */
+ __volatile__ unsigned long cnt; /* How many bytes to transfer */
+ __volatile__ unsigned long dma_test; /* DMA test register */
+};
+
+/* DVMA chip revisions */
+enum dvma_rev {
+ dvmarev0,
+ dvmaesc1,
+ dvmarev1,
+ dvmarev2,
+ dvmarev3,
+ dvmarevplus,
+ dvmahme
+};
+
+#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct Linux_SBus_DMA {
+ struct Linux_SBus_DMA *next;
+ struct linux_sbus_device *SBus_dev;
+ struct sparc_dma_registers *regs;
+
+ /* Status, misc info */
+ int node; /* Prom node for this DMA device */
+ int running; /* Are we doing DMA now? */
+ int allocated; /* Are we "owned" by anyone yet? */
+
+ /* Transfer information. */
+ unsigned long addr; /* Start address of current transfer */
+ int nbytes; /* Size of current transfer */
+ int realbytes; /* For splitting up large transfers, etc. */
+
+ /* DMA revision */
+ enum dvma_rev revision;
+};
+
+extern struct Linux_SBus_DMA *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
+#define DMA_VERS0 0x00000000 /* Sunray DMA version */
+#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
+#define DMA_VERS1 0x80000000 /* DMA rev 1 */
+#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
+#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
+#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
+#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
+#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
+#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
+#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
+#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
+#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
+#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
+#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
+#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */
+#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
+#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
+#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
+#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
+#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
+#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1 0x01
+#define DMA_BURST2 0x02
+#define DMA_BURST4 0x04
+#define DMA_BURST8 0x08
+#define DMA_BURST16 0x10
+#define DMA_BURST32 0x20
+#define DMA_BURST64 0x40
+#define DMA_BURSTBITS 0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+ ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+ ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done. So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler. You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+ if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+ } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+ if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+ } while(0)
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+ struct sparc_dma_registers *regs = dma->regs; \
+ /* Let the current FIFO drain itself */ \
+ sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
+ /* Reset the logic */ \
+ regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
+ __delay(400); /* let the bits set ;) */ \
+ regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
+ sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
+ /* Enable FAST transfers if available */ \
+ if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
+ dma->running = 0; \
+} while(0)
+
+
+#endif /* !CONFIG_SUN3 */
+
+#endif /* !(__M68K_DVMA_H) */
--- /dev/null
+#ifdef __uClinux__
+#include "elf_no.h"
+#else
+#include "elf_mm.h"
+#endif
--- /dev/null
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE 0
+#define R_68K_32 1
+#define R_68K_16 2
+#define R_68K_8 3
+#define R_68K_PC32 4
+#define R_68K_PC16 5
+#define R_68K_PC8 6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8 9
+#define R_68K_GOT32O 10
+#define R_68K_GOT16O 11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8 15
+#define R_68K_PLT32O 16
+#define R_68K_PLT16O 17
+#define R_68K_PLT8O 18
+#define R_68K_COPY 19
+#define R_68K_GLOB_DAT 20
+#define R_68K_JMP_SLOT 21
+#define R_68K_RELATIVE 22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+ passed in %a1. Although my copy of the ABI has no such statement, it
+ is actually used on ASV. */
+#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN3
+#define ELF_EXEC_PAGESIZE 4096
+#else
+#define ELF_EXEC_PAGESIZE 8192
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#ifndef CONFIG_SUN3
+#define ELF_ET_DYN_BASE 0xD0000000UL
+#else
+#define ELF_ET_DYN_BASE 0x0D800000UL
+#endif
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ /* Bleech. */ \
+ pr_reg[0] = regs->d1; \
+ pr_reg[1] = regs->d2; \
+ pr_reg[2] = regs->d3; \
+ pr_reg[3] = regs->d4; \
+ pr_reg[4] = regs->d5; \
+ pr_reg[7] = regs->a0; \
+ pr_reg[8] = regs->a1; \
+ pr_reg[9] = regs->a2; \
+ pr_reg[14] = regs->d0; \
+ pr_reg[15] = rdusp(); \
+ pr_reg[16] = regs->orig_d0; \
+ pr_reg[17] = regs->sr; \
+ pr_reg[18] = regs->pc; \
+ pr_reg[19] = (regs->format << 12) | regs->vector; \
+ { \
+ struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
+ pr_reg[5] = sw->d6; \
+ pr_reg[6] = sw->d7; \
+ pr_reg[10] = sw->a3; \
+ pr_reg[11] = sw->a4; \
+ pr_reg[12] = sw->a5; \
+ pr_reg[13] = sw->a6; \
+ }
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
--- /dev/null
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE 0
+#define R_68K_32 1
+#define R_68K_16 2
+#define R_68K_8 3
+#define R_68K_PC32 4
+#define R_68K_PC16 5
+#define R_68K_PC8 6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8 9
+#define R_68K_GOT32O 10
+#define R_68K_GOT16O 11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8 15
+#define R_68K_PLT32O 16
+#define R_68K_PLT16O 17
+#define R_68K_PLT8O 18
+#define R_68K_COPY 19
+#define R_68K_GLOB_DAT 20
+#define R_68K_JMP_SLOT 21
+#define R_68K_RELATIVE 22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+ passed in %a1. Although my copy of the ABI has no such statement, it
+ is actually used on ASV. */
+#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ /* Bleech. */ \
+ pr_reg[0] = regs->d1; \
+ pr_reg[1] = regs->d2; \
+ pr_reg[2] = regs->d3; \
+ pr_reg[3] = regs->d4; \
+ pr_reg[4] = regs->d5; \
+ pr_reg[7] = regs->a0; \
+ pr_reg[8] = regs->a1; \
+ pr_reg[14] = regs->d0; \
+ pr_reg[15] = rdusp(); \
+ pr_reg[16] = 0 /* regs->orig_d0 */; \
+ pr_reg[17] = regs->sr; \
+ pr_reg[18] = regs->pc; \
+ /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \
+ { \
+ struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
+ pr_reg[5] = sw->d6; \
+ pr_reg[6] = sw->d7; \
+ pr_reg[10] = sw->a3; \
+ pr_reg[11] = sw->a4; \
+ pr_reg[12] = sw->a5; \
+ pr_reg[13] = sw->a6; \
+ }
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
--- /dev/null
+/****************************************************************************/
+
+/*
+ * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ * (C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef elia_h
+#define elia_h
+/****************************************************************************/
+
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ * The serial port DTR and DCD lines are also on the Parallel I/O
+ * as well, so define those too.
+ */
+
+#define eLIA_DCD1 0x0001
+#define eLIA_DCD0 0x0002
+#define eLIA_DTR1 0x0004
+#define eLIA_DTR0 0x0008
+
+#define eLIA_PCIRESET 0x0020
+
+/*
+ * Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif /* elia_h */
--- /dev/null
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
--- /dev/null
+#ifdef __uClinux__
+#include "entry_no.h"
+#else
+#include "entry_mm.h"
+#endif
--- /dev/null
+#ifndef __M68K_ENTRY_H
+#define __M68K_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ * 0(sp) - d1
+ * 4(sp) - d2
+ * 8(sp) - d3
+ * C(sp) - d4
+ * 10(sp) - d5
+ * 14(sp) - a0
+ * 18(sp) - a1
+ * 1C(sp) - a2
+ * 20(sp) - d0
+ * 24(sp) - orig_d0
+ * 28(sp) - stack adjustment
+ * 2C(sp) - sr
+ * 2E(sp) - pc
+ * 32(sp) - format & vector
+ */
+
+/*
+ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
+ * the whole kernel.
+ */
+
+/* the following macro is used when enabling interrupts */
+#if defined(MACH_ATARI_ONLY)
+ /* block out HSYNC on the atari */
+#define ALLOWINT (~0x400)
+#define MAX_NOINT_IPL 3
+#else
+ /* portable version */
+#define ALLOWINT (~0x700)
+#define MAX_NOINT_IPL 0
+#endif /* machine compilation types */
+
+#ifdef __ASSEMBLY__
+
+#define curptr a2
+
+LFLUSH_I_AND_D = 0x00000808
+LSIGTRAP = 5
+
+/* process bits for task_struct.ptrace */
+PT_TRACESYS_OFF = 3
+PT_TRACESYS_BIT = 1
+PT_PTRACED_OFF = 3
+PT_PTRACED_BIT = 0
+PT_DTRACE_OFF = 3
+PT_DTRACE_BIT = 2
+
+#define SAVE_ALL_INT save_all_int
+#define SAVE_ALL_SYS save_all_sys
+#define RESTORE_ALL restore_all
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs a3-a6 and d6-d7 are preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+/*
+ * a -1 in the orig_d0 field signifies
+ * that the stack frame is NOT for syscall
+ */
+.macro save_all_int
+ clrl %sp@- | stk_adj
+ pea -1:w | orig d0
+ movel %d0,%sp@- | d0
+ moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
+.endm
+
+.macro save_all_sys
+ clrl %sp@- | stk_adj
+ movel %d0,%sp@- | orig d0
+ movel %d0,%sp@- | d0
+ moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
+.endm
+
+.macro restore_all
+ moveml %sp@+,%a0-%a1/%curptr/%d1-%d5
+ movel %sp@+,%d0
+ addql #4,%sp | orig d0
+ addl %sp@+,%sp | stk adj
+ rte
+.endm
+
+#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
+
+#define SAVE_SWITCH_STACK save_switch_stack
+#define RESTORE_SWITCH_STACK restore_switch_stack
+#define GET_CURRENT(tmp) get_current tmp
+
+.macro save_switch_stack
+ moveml %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro restore_switch_stack
+ moveml %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+.macro get_current reg=%d0
+ movel %sp,\reg
+ andw #-THREAD_SIZE,\reg
+ movel \reg,%curptr
+ movel %curptr@,%curptr
+.endm
+
+#else /* C source */
+
+#define STR(X) STR1(X)
+#define STR1(X) #X
+
+#define PT_OFF_ORIG_D0 0x24
+#define PT_OFF_FORMATVEC 0x32
+#define PT_OFF_SR 0x2C
+#define SAVE_ALL_INT \
+ "clrl %%sp@-;" /* stk_adj */ \
+ "pea -1:w;" /* orig d0 = -1 */ \
+ "movel %%d0,%%sp@-;" /* d0 */ \
+ "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
+#define GET_CURRENT(tmp) \
+ "movel %%sp,"#tmp"\n\t" \
+ "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
+ "movel "#tmp",%%a2\n\t" \
+ "movel %%a2@,%%a2"
+
+#endif
+
+#endif /* __M68K_ENTRY_H */
--- /dev/null
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ * 0(sp) - d1
+ * 4(sp) - d2
+ * 8(sp) - d3
+ * C(sp) - d4
+ * 10(sp) - d5
+ * 14(sp) - a0
+ * 18(sp) - a1
+ * 1C(sp) - a2
+ * 20(sp) - d0
+ * 24(sp) - orig_d0
+ * 28(sp) - stack adjustment
+ * 2C(sp) - [ sr ] [ format & vector ]
+ * 2E(sp) - [ pc-hiword ] [ sr ]
+ * 30(sp) - [ pc-loword ] [ pc-hiword ]
+ * 32(sp) - [ format & vector ] [ pc-loword ]
+ * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
+ * M68K COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+ move #0x2700,%sr /* disable intrs */
+ btst #5,%sp@(2) /* from user? */
+ bnes 6f /* no, skip */
+ movel %sp,sw_usp /* save user sp */
+ addql #8,sw_usp /* remove exception */
+ movel sw_ksp,%sp /* kernel sp */
+ subql #8,%sp /* room for exception */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ movel sw_usp,%a0 /* get usp */
+ movel %a0@-,%sp@(PT_PC) /* copy exception program counter */
+ movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+ bra 7f
+ 6:
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ 7:
+.endm
+
+.macro RESTORE_ALL
+ btst #5,%sp@(PT_SR) /* going user? */
+ bnes 8f /* no, skip */
+ move #0x2700,%sr /* disable intrs */
+ movel sw_usp,%a0 /* get usp */
+ movel %sp@(PT_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ addql #8,%sp /* remove exception */
+ movel %sp,sw_ksp /* save ksp */
+ subql #8,sw_usp /* set exception */
+ movel sw_usp,%sp /* restore usp */
+ rte
+ 8:
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+ move #0x2700,%sr /* disable intrs */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+ lea %sp@(-24),%sp /* 6 regs */
+ moveml %a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@,%a3-%a6/%d6-%d7
+ lea %sp@(24),%sp /* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ moveml %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+ moveml %sp@+,%a0-%a2/%d1-%d5
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+ moveml %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */
--- /dev/null
+#ifndef _M68K_ERRNO_H
+#define _M68K_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _M68K_ERRNO_H */
--- /dev/null
+#ifdef __uClinux__
+#include "fb_no.h"
+#else
+#include "fb_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_SUN3
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+ unsigned long off)
+{
+ pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE;
+}
+#else
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+ unsigned long off)
+{
+ if (CPU_IS_020_OR_030)
+ pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030;
+ if (CPU_IS_040_OR_060) {
+ pgprot_val(vma->vm_page_prot) &= _CACHEMASK040;
+ /* Use no-cache mode, serialized */
+ pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S;
+ }
+}
+#endif /* CONFIG_SUN3 */
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H_ */
--- /dev/null
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H_ */
--- /dev/null
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE -1
+#define FBTYPE_SUN1BW 0 /* mono */
+#define FBTYPE_SUN1COLOR 1
+#define FBTYPE_SUN2BW 2
+#define FBTYPE_SUN2COLOR 3
+#define FBTYPE_SUN2GP 4
+#define FBTYPE_SUN5COLOR 5
+#define FBTYPE_SUN3COLOR 6
+#define FBTYPE_MEMCOLOR 7
+#define FBTYPE_SUN4COLOR 8
+
+#define FBTYPE_NOTSUN1 9
+#define FBTYPE_NOTSUN2 10
+#define FBTYPE_NOTSUN3 11
+
+#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */
+#define FBTYPE_SUNROP_COLOR 13
+#define FBTYPE_SUNFB_VIDEO 14
+#define FBTYPE_SUNGIFB 15
+#define FBTYPE_SUNGPLAS 16
+#define FBTYPE_SUNGP3 17
+#define FBTYPE_SUNGT 18
+#define FBTYPE_SUNLEO 19 /* zx Leo card */
+#define FBTYPE_MDICOLOR 20 /* cg14 */
+#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR 22
+#define FBTYPE_PCI_IGA1682 23
+#define FBTYPE_P9100COLOR 24
+
+#define FBTYPE_PCI_GENERIC 1000
+#define FBTYPE_PCI_MACH64 1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct fbtype {
+ int fb_type; /* fb type, see above */
+ int fb_height; /* pixels */
+ int fb_width; /* pixels */
+ int fb_depth;
+ int fb_cmsize; /* color map entries */
+ int fb_size; /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct fbcmap {
+ int index; /* first element (0 origin) */
+ int count;
+ unsigned char __user *red;
+ unsigned char __user *green;
+ unsigned char __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC 8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES 4
+
+struct fbsattr {
+ int flags;
+ int emu_type; /* -1 if none */
+ int dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+
+struct fbgattr {
+ int real_type; /* real frame buffer type */
+ int owner; /* unknown */
+ struct fbtype fbtype; /* real frame buffer fbtype */
+ struct fbsattr sattr;
+ int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+ short set; /* what to set, choose from the list above */
+ short enable; /* cursor on/off */
+ struct fbcurpos pos; /* cursor position */
+ struct fbcurpos hot; /* cursor hot spot */
+ struct fbcmap cmap; /* color map info */
+ struct fbcurpos size; /* cursor bit map size */
+ char __user *image; /* cursor image bits */
+ char __user *mask; /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor)
+
+/* set/get cursor position */
+#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos)
+
+/* get max cursor size */
+#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8 0
+#define FB_WID_SHARED_24 1
+#define FB_WID_DBL_8 2
+#define FB_WID_DBL_24 3
+ __u32 wa_type;
+ __s32 wa_index; /* Set on return */
+ __u32 wa_count;
+};
+struct fb_wid_item {
+ __u32 wi_type;
+ __s32 wi_index;
+ __u32 wi_attrs;
+ __u32 wi_values[32];
+};
+struct fb_wid_list {
+ __u32 wl_flags;
+ __u32 wl_count;
+ struct fb_wid_item *wl_list;
+};
+
+#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL ('F'<<8)
+#define FFB_SYS_INFO (FFB_IOCTL|80)
+#define FFB_CLUTREAD (FFB_IOCTL|81)
+#define FFB_CLUTPOST (FFB_IOCTL|82)
+#define FFB_SETDIAGMODE (FFB_IOCTL|83)
+#define FFB_GETMONITORID (FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE (FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE (FFB_IOCTL|86)
+#define FFB_SETSERVER (FFB_IOCTL|87)
+#define FFB_SETOVCTL (FFB_IOCTL|88)
+#define FFB_GETOVCTL (FFB_IOCTL|89)
+#define FFB_GETSAXNUM (FFB_IOCTL|90)
+#define FFB_FBDEBUG (FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL ('M'<<8)
+#define MDI_RESET (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE (MDI_IOCTL|3)
+# define MDI_32_PIX 32
+# define MDI_16_PIX 16
+# define MDI_8_PIX 8
+
+struct mdi_cfginfo {
+ int mdi_ncluts; /* Number of implemented CLUTs in this MDI */
+ int mdi_type; /* FBTYPE name */
+ int mdi_height; /* height */
+ int mdi_width; /* widht */
+ int mdi_size; /* available ram */
+ int mdi_mode; /* 8bpp, 16bpp or 32bpp */
+ int mdi_pixfreq; /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+ __u32 clutid; /* Set on return */
+ __u32 flag;
+ __u32 index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */
+ __u32 flag;
+ __u32 clutid;
+ __u32 offset;
+ __u32 count;
+ char * red;
+ char * green;
+ char * blue;
+};
+
+struct fb_clut32 {
+ __u32 flag;
+ __u32 clutid;
+ __u32 offset;
+ __u32 count;
+ __u32 red;
+ __u32 green;
+ __u32 blue;
+};
+
+#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC 0x70000000
+#define CG6_TEC 0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC 0x70004000
+#define CG6_THC 0x70005000
+#define CG6_ROM 0x70006000
+#define CG6_RAM 0x70016000
+#define CG6_DHC 0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT 0x00000000
+#define TCX_RAM24BIT 0x01000000
+#define TCX_UNK3 0x10000000
+#define TCX_UNK4 0x20000000
+#define TCX_CONTROLPLANE 0x28000000
+#define TCX_UNK6 0x30000000
+#define TCX_UNK7 0x38000000
+#define TCX_TEC 0x70000000
+#define TCX_BTREGS 0x70002000
+#define TCX_THC 0x70004000
+#define TCX_DHC 0x70008000
+#define TCX_ALT 0x7000a000
+#define TCX_SYNC 0x7000e000
+#define TCX_UNK2 0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS 0 /* registers */
+#define CG14_CURSORREGS 0x1000 /* cursor registers */
+#define CG14_DACREGS 0x2000 /* DAC registers */
+#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */
+#define CG14_CLUT1 0x4000 /* Color Look Up Table */
+#define CG14_CLUT2 0x5000 /* Color Look Up Table */
+#define CG14_CLUT3 0x6000 /* Color Look Up Table */
+#define CG14_AUTO 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP 0x00000000
+#define LEO_LC_SS0_USR_MAP 0x00800000
+#define LEO_LD_SS0_MAP 0x00801000
+#define LEO_LX_CURSOR_MAP 0x00802000
+#define LEO_SS1_MAP 0x00803000
+#define LEO_LC_SS1_USR_MAP 0x01003000
+#define LEO_LD_SS1_MAP 0x01004000
+#define LEO_UNK_MAP 0x01005000
+#define LEO_LX_KRN_MAP 0x01006000
+#define LEO_LC_SS0_KRN_MAP 0x01007000
+#define LEO_LC_SS1_KRN_MAP 0x01008000
+#define LEO_LD_GBL_MAP 0x01009000
+#define LEO_UNK2_MAP 0x0100a000
+
+#ifdef __KERNEL__
+struct fbcmap32 {
+ int index; /* first element (0 origin) */
+ int count;
+ u32 red;
+ u32 green;
+ u32 blue;
+};
+
+#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+ short set; /* what to set, choose from the list above */
+ short enable; /* cursor on/off */
+ struct fbcurpos pos; /* cursor position */
+ struct fbcurpos hot; /* cursor hot spot */
+ struct fbcmap32 cmap; /* color map info */
+ struct fbcurpos size; /* cursor bit map size */
+ u32 image; /* cursor image bits */
+ u32 mask; /* cursor mask bits */
+};
+
+#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
--- /dev/null
+#ifndef _M68K_FCNTL_H
+#define _M68K_FCNTL_H
+
+#define O_DIRECTORY 040000 /* must be a directory */
+#define O_NOFOLLOW 0100000 /* don't follow links */
+#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE 0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _M68K_FCNTL_H */
--- /dev/null
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack() 1
+#define flat_old_ram_flag(flags) (flags)
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
+#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
+#define flat_get_relocate_addr(rel) (rel)
+#define flat_set_persistent(relval, p) 0
+
+#endif /* __M68KNOMMU_FLAT_H__ */
--- /dev/null
+/*
+ * Implementation independent bits of the Floppy driver.
+ *
+ * much of this file is derived from what was originally the Q40 floppy driver.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2001
+ *
+ * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net)
+ *
+ */
+
+#include <asm/io.h>
+
+#include <linux/vmalloc.h>
+
+asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id);
+
+/* constants... */
+
+#undef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS 0x00 /* nothing like that */
+
+
+/*
+ * Again, the CMOS information doesn't work on m68k..
+ */
+#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4)
+#define FLOPPY1_TYPE 0
+
+/* basically PC init + set use_virtual_dma */
+#define FDC1 m68k_floppy_init()
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+
+/* vdma globals adapted from asm-i386/floppy.h */
+
+static int virtual_dma_count=0;
+static int virtual_dma_residue=0;
+static char *virtual_dma_addr=NULL;
+static int virtual_dma_mode=0;
+static int doing_pdma=0;
+
+#include <asm/sun3xflop.h>
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+
+static __inline__ unsigned char fd_inb(int port)
+{
+ if(MACH_IS_Q40)
+ return inb_p(port);
+ else if(MACH_IS_SUN3X)
+ return sun3x_82072_fd_inb(port);
+ return 0;
+}
+
+static __inline__ void fd_outb(unsigned char value, int port)
+{
+ if(MACH_IS_Q40)
+ outb_p(value, port);
+ else if(MACH_IS_SUN3X)
+ sun3x_82072_fd_outb(value, port);
+}
+
+
+static int fd_request_irq(void)
+{
+ if(MACH_IS_Q40)
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", floppy_hardint);
+ else if(MACH_IS_SUN3X)
+ return sun3xflop_request_irq();
+ return -ENXIO;
+}
+
+static void fd_free_irq(void)
+{
+ if(MACH_IS_Q40)
+ free_irq(FLOPPY_IRQ, floppy_hardint);
+}
+
+#define fd_request_dma() vdma_request_dma(FLOPPY_DMA,"floppy")
+#define fd_get_dma_residue() vdma_get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size) vdma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io)
+
+#define fd_enable_irq() /* nothing... */
+#define fd_disable_irq() /* nothing... */
+
+#define fd_free_dma() /* nothing */
+
+/* No 64k boundary crossing problems on Q40 - no DMA at all */
+#define CROSS_64KB(a,s) (0)
+
+#define DMA_MODE_READ 0x44 /* i386 look-alike */
+#define DMA_MODE_WRITE 0x48
+
+
+static int m68k_floppy_init(void)
+{
+ use_virtual_dma =1;
+ can_use_virtual_dma = 1;
+
+
+ if (MACH_IS_Q40)
+ return 0x3f0;
+ else if(MACH_IS_SUN3X)
+ return sun3xflop_init();
+ else
+ return -1;
+}
+
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+ return 0;
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+ return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+ return (unsigned long) vmalloc(size);
+
+}
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+ vfree((void *)addr);
+}
+#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size)
+
+
+/* choose_dma_mode ???*/
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ doing_pdma = 1;
+ virtual_dma_port = (MACH_IS_Q40 ? io : 0);
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_addr = addr;
+ virtual_dma_count = size;
+ virtual_dma_residue = 0;
+ return 0;
+}
+
+
+
+static void fd_disable_dma(void)
+{
+ doing_pdma = 0;
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+}
+
+
+
+/* this is the only truly Q40 specific function */
+
+asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+ register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+ static int calls=0;
+ static int bytes=0;
+ static int dma_wait=0;
+#endif
+ if(!doing_pdma) {
+ floppy_interrupt(irq, dev_id);
+ return IRQ_HANDLED;
+ }
+
+#ifdef TRACE_FLPY_INT
+ if(!calls)
+ bytes = virtual_dma_count;
+#endif
+
+ {
+ register int lcount;
+ register char *lptr;
+
+ /* serve 1st byte fast: */
+
+ st=1;
+ for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st=inb(virtual_dma_port+4) & 0xa0 ;
+ if(st != 0xa0)
+ break;
+ if(virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port+5);
+ else
+ *lptr = inb_p(virtual_dma_port+5);
+ }
+
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ st = inb(virtual_dma_port+4);
+ }
+
+#ifdef TRACE_FLPY_INT
+ calls++;
+#endif
+ if(st == 0x20)
+ return IRQ_HANDLED;
+ if(!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+ printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+ virtual_dma_count, virtual_dma_residue, calls, bytes,
+ dma_wait);
+ calls = 0;
+ dma_wait=0;
+#endif
+ doing_pdma = 0;
+ floppy_interrupt(irq, dev_id);
+ return IRQ_HANDLED;
+ }
+#ifdef TRACE_FLPY_INT
+ if(!virtual_dma_count)
+ dma_wait++;
+#endif
+ return IRQ_HANDLED;
+}
+
+#define EXTRA_FLOPPY_PARAMS
--- /dev/null
+#ifdef __uClinux__
+#include "fpu_no.h"
+#else
+#include "fpu_mm.h"
+#endif
--- /dev/null
+#ifndef __M68K_FPU_H
+#define __M68K_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216)
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96)
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28)
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12)
+#else
+#define FPSTATESIZE (0)
+#endif
+
+#endif /* __M68K_FPU_H */
--- /dev/null
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */
--- /dev/null
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "hardirq_no.h"
+#else
+#include "hardirq_mm.h"
+#endif
--- /dev/null
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
+
+#endif
--- /dev/null
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* __M68K_HARDIRQ_H */
--- /dev/null
+#ifndef _M68K_HP300HW_H
+#define _M68K_HP300HW_H
+
+extern unsigned long hp300_model;
+
+/* This information was taken from NetBSD */
+#define HP_320 (0) /* 16MHz 68020+HP MMU+16K external cache */
+#define HP_330 (1) /* 16MHz 68020+68851 MMU */
+#define HP_340 (2) /* 16MHz 68030 */
+#define HP_345 (3) /* 50MHz 68030+32K external cache */
+#define HP_350 (4) /* 25MHz 68020+HP MMU+32K external cache */
+#define HP_360 (5) /* 25MHz 68030 */
+#define HP_370 (6) /* 33MHz 68030+64K external cache */
+#define HP_375 (7) /* 50MHz 68030+32K external cache */
+#define HP_380 (8) /* 25MHz 68040 */
+#define HP_385 (9) /* 33MHz 68040 */
+
+#define HP_400 (10) /* 50MHz 68030+32K external cache */
+#define HP_425T (11) /* 25MHz 68040 - model 425t */
+#define HP_425S (12) /* 25MHz 68040 - model 425s */
+#define HP_425E (13) /* 25MHz 68040 - model 425e */
+#define HP_433T (14) /* 33MHz 68040 - model 433t */
+#define HP_433S (15) /* 33MHz 68040 - model 433s */
+
+#endif /* _M68K_HP300HW_H */
--- /dev/null
+#ifdef __uClinux__
+#include "hw_irq_no.h"
+#else
+#include "hw_irq_mm.h"
+#endif
--- /dev/null
+#ifndef __ASM_M68K_HW_IRQ_H
+#define __ASM_M68K_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
--- /dev/null
+#ifndef __M68KNOMMU_HW_IRQ_H__
+#define __M68KNOMMU_HW_IRQ_H__
+
+#endif /* __M68KNOMMU_HW_IRQ_H__ */
--- /dev/null
+/* Routines to test for presence/absence of hardware registers:
+ * see arch/m68k/mm/hwtest.c.
+ * -- PMM <pmaydell@chiark.greenend.org.uk> 05/1998
+ *
+ * Removed __init from decls. We might want them in modules, and
+ * the code is tiny anyway. 16/5/98 pb
+ */
+
+#ifndef __ASM_HWTEST_H
+#define __ASM_HWTEST_H
+
+extern int hwreg_present(volatile void *regp);
+extern int hwreg_write(volatile void *regp, unsigned short val);
+
+#endif
--- /dev/null
+/*
+ * linux/include/asm-m68k/ide.h
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
+ */
+
+/* Copyright(c) 1996 Kars de Jong */
+/* Based on the ide driver from 1.2.13pl8 */
+
+/*
+ * Credits (alphabetical):
+ *
+ * - Bjoern Brauel
+ * - Kars de Jong
+ * - Torsten Ebeling
+ * - Dwight Engen
+ * - Thorsten Floeck
+ * - Roman Hodek
+ * - Guenther Kelleter
+ * - Chris Lawrence
+ * - Michael Rausch
+ * - Christian Sauer
+ * - Michael Schmitz
+ * - Jes Soerensen
+ * - Michael Thurm
+ * - Geert Uytterhoeven
+ */
+
+#ifndef _M68K_IDE_H
+#define _M68K_IDE_H
+
+#ifdef __KERNEL__
+
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_ATARI
+#include <linux/interrupt.h>
+#include <asm/atari_stdma.h>
+#endif
+
+#ifdef CONFIG_MAC
+#include <asm/macints.h>
+#endif
+
+/*
+ * Get rid of defs from io.h - ide has its private and conflicting versions
+ * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
+ * always use the `raw' MMIO versions
+ */
+#undef inb
+#undef inw
+#undef insw
+#undef inl
+#undef insl
+#undef outb
+#undef outw
+#undef outsw
+#undef outl
+#undef outsl
+#undef readb
+#undef readw
+#undef readl
+#undef writeb
+#undef writew
+#undef writel
+
+#define inb in_8
+#define inw in_be16
+#define insw(port, addr, n) raw_insw((u16 *)port, addr, n)
+#define inl in_be32
+#define insl(port, addr, n) raw_insl((u32 *)port, addr, n)
+#define outb(val, port) out_8(port, val)
+#define outw(val, port) out_be16(port, val)
+#define outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
+#define outl(val, port) out_be32(port, val)
+#define outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
+#define readb in_8
+#define readw in_be16
+#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n)
+#define readl in_be32
+#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n)
+#define writeb(val, port) out_8(port, val)
+#define writew(val, port) out_be16(port, val)
+#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
+#define writel(val, port) out_be32(port, val)
+#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
+#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
+#define insw_swapw(port, addr, n) raw_insw_swapw((u16 *)port, addr, n)
+#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n)
+#endif
+
+#ifdef CONFIG_BLK_DEV_FALCON_IDE
+#define IDE_ARCH_LOCK
+
+extern int falconide_intr_lock;
+
+static __inline__ void ide_release_lock (void)
+{
+ if (MACH_IS_ATARI) {
+ if (falconide_intr_lock == 0) {
+ printk("ide_release_lock: bug\n");
+ return;
+ }
+ falconide_intr_lock = 0;
+ stdma_release();
+ }
+}
+
+static __inline__ void
+ide_get_lock(irq_handler_t handler, void *data)
+{
+ if (MACH_IS_ATARI) {
+ if (falconide_intr_lock == 0) {
+ if (in_interrupt() > 0)
+ panic( "Falcon IDE hasn't ST-DMA lock in interrupt" );
+ stdma_lock(handler, data);
+ falconide_intr_lock = 1;
+ }
+ }
+}
+#endif /* CONFIG_BLK_DEV_FALCON_IDE */
+
+#define IDE_ARCH_ACK_INTR
+#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
+
+#endif /* __KERNEL__ */
+#endif /* _M68K_IDE_H */
--- /dev/null
+#ifndef _M68K_IDPROM_H
+#define _M68K_IDPROM_H
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/types.h>
+
+struct idprom {
+ u8 id_format; /* Format identifier (always 0x01) */
+ u8 id_machtype; /* Machine type */
+ u8 id_ethaddr[6]; /* Hardware ethernet address */
+ s32 id_date; /* Date of manufacture */
+ u32 id_sernum:24; /* Unique serial number */
+ u8 id_cksum; /* Checksum - xor of the data bytes */
+ u8 reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+/* Sun3: in control space */
+#define SUN3_IDPROM_BASE 0x00000000
+
+#endif /* !(_M68K_IDPROM_H) */
--- /dev/null
+#ifndef _SUN3_INTERSIL_H
+#define _SUN3_INTERSIL_H
+/* bits 0 and 1 */
+#define INTERSIL_FREQ_32K 0x00
+#define INTERSIL_FREQ_1M 0x01
+#define INTERSIL_FREQ_2M 0x02
+#define INTERSIL_FREQ_4M 0x03
+
+/* bit 2 */
+#define INTERSIL_12H_MODE 0x00
+#define INTERSIL_24H_MODE 0x04
+
+/* bit 3 */
+#define INTERSIL_STOP 0x00
+#define INTERSIL_RUN 0x08
+
+/* bit 4 */
+#define INTERSIL_INT_ENABLE 0x10
+#define INTERSIL_INT_DISABLE 0x00
+
+/* bit 5 */
+#define INTERSIL_MODE_NORMAL 0x00
+#define INTERSIL_MODE_TEST 0x20
+
+#define INTERSIL_HZ_100_MASK 0x02
+
+struct intersil_dt {
+ unsigned char csec;
+ unsigned char hour;
+ unsigned char minute;
+ unsigned char second;
+ unsigned char month;
+ unsigned char day;
+ unsigned char year;
+ unsigned char weekday;
+};
+
+struct intersil_7170 {
+ struct intersil_dt counter;
+ struct intersil_dt alarm;
+ unsigned char int_reg;
+ unsigned char cmd_reg;
+};
+
+extern volatile char* clock_va;
+#define intersil_clock ((volatile struct intersil_7170 *) clock_va)
+#define intersil_clear() (void)intersil_clock->int_reg
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "io_no.h"
+#else
+#include "io_mm.h"
+#endif
--- /dev/null
+/*
+ * linux/include/asm-m68k/io.h
+ *
+ * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other
+ * IO access
+ * - added Q40 support
+ * - added skeleton for GG-II and Amiga PCMCIA
+ * 2/3/01 RZ: - moved a few more defs into raw_io.h
+ *
+ * inX/outX should not be used by any driver unless it does
+ * ISA access. Other drivers should use function defined in raw_io.h
+ * or define its own macros on top of these.
+ *
+ * inX(),outX() are for ISA I/O
+ * isa_readX(),isa_writeX() are for ISA memory
+ */
+
+#ifndef _IO_H
+#define _IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/raw_io.h>
+#include <asm/virtconvert.h>
+
+#include <asm-generic/iomap.h>
+
+#ifdef CONFIG_ATARI
+#include <asm/atarihw.h>
+#endif
+
+
+/*
+ * IO/MEM definitions for various ISA bridges
+ */
+
+
+#ifdef CONFIG_Q40
+
+#define q40_isa_io_base 0xff400000
+#define q40_isa_mem_base 0xff800000
+
+#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr)))
+#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+ 4*((unsigned long)(ioaddr)))
+#define Q40_ISA_MEM_B(madr) (q40_isa_mem_base+1+4*((unsigned long)(madr)))
+#define Q40_ISA_MEM_W(madr) (q40_isa_mem_base+ 4*((unsigned long)(madr)))
+
+#define MULTI_ISA 0
+#endif /* Q40 */
+
+/* GG-II Zorro to ISA bridge */
+#ifdef CONFIG_GG2
+
+extern unsigned long gg2_isa_base;
+#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4))
+#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+ ((unsigned long)(ioaddr)*4))
+#define GG2_ISA_MEM_B(madr) (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff))
+#define GG2_ISA_MEM_W(madr) (gg2_isa_base+ (((unsigned long)(madr)*4) & 0xfffff))
+
+#ifndef MULTI_ISA
+#define MULTI_ISA 0
+#else
+#undef MULTI_ISA
+#define MULTI_ISA 1
+#endif
+#endif /* GG2 */
+
+#ifdef CONFIG_AMIGA_PCMCIA
+#include <asm/amigayle.h>
+
+#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) )
+#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) )
+
+#ifndef MULTI_ISA
+#define MULTI_ISA 0
+#else
+#undef MULTI_ISA
+#define MULTI_ISA 1
+#endif
+#endif /* AMIGA_PCMCIA */
+
+
+
+#ifdef CONFIG_ISA
+
+#if MULTI_ISA == 0
+#undef MULTI_ISA
+#endif
+
+#define ISA_TYPE_Q40 (1)
+#define ISA_TYPE_GG2 (2)
+#define ISA_TYPE_AG (3)
+
+#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
+#define ISA_TYPE ISA_TYPE_Q40
+#define ISA_SEX 0
+#endif
+#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
+#define ISA_TYPE ISA_TYPE_AG
+#define ISA_SEX 1
+#endif
+#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
+#define ISA_TYPE ISA_TYPE_GG2
+#define ISA_SEX 0
+#endif
+
+#ifdef MULTI_ISA
+extern int isa_type;
+extern int isa_sex;
+
+#define ISA_TYPE isa_type
+#define ISA_SEX isa_sex
+#endif
+
+/*
+ * define inline addr translation functions. Normally only one variant will
+ * be compiled in so the case statement will be optimised away
+ */
+
+static inline u8 __iomem *isa_itb(unsigned long addr)
+{
+ switch(ISA_TYPE)
+ {
+#ifdef CONFIG_Q40
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
+#endif
+#ifdef CONFIG_GG2
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+ case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
+#endif
+ default: return NULL; /* avoid warnings, just in case */
+ }
+}
+static inline u16 __iomem *isa_itw(unsigned long addr)
+{
+ switch(ISA_TYPE)
+ {
+#ifdef CONFIG_Q40
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
+#endif
+#ifdef CONFIG_GG2
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+ case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
+#endif
+ default: return NULL; /* avoid warnings, just in case */
+ }
+}
+static inline u32 __iomem *isa_itl(unsigned long addr)
+{
+ switch(ISA_TYPE)
+ {
+#ifdef CONFIG_AMIGA_PCMCIA
+ case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
+#endif
+ default: return 0; /* avoid warnings, just in case */
+ }
+}
+static inline u8 __iomem *isa_mtb(unsigned long addr)
+{
+ switch(ISA_TYPE)
+ {
+#ifdef CONFIG_Q40
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
+#endif
+#ifdef CONFIG_GG2
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+ case ISA_TYPE_AG: return (u8 __iomem *)addr;
+#endif
+ default: return NULL; /* avoid warnings, just in case */
+ }
+}
+static inline u16 __iomem *isa_mtw(unsigned long addr)
+{
+ switch(ISA_TYPE)
+ {
+#ifdef CONFIG_Q40
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
+#endif
+#ifdef CONFIG_GG2
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+ case ISA_TYPE_AG: return (u16 __iomem *)addr;
+#endif
+ default: return NULL; /* avoid warnings, just in case */
+ }
+}
+
+
+#define isa_inb(port) in_8(isa_itb(port))
+#define isa_inw(port) (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
+#define isa_inl(port) (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port)))
+#define isa_outb(val,port) out_8(isa_itb(port),(val))
+#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
+#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
+
+#define isa_readb(p) in_8(isa_mtb((unsigned long)(p)))
+#define isa_readw(p) \
+ (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \
+ : in_le16(isa_mtw((unsigned long)(p))))
+#define isa_writeb(val,p) out_8(isa_mtb((unsigned long)(p)),(val))
+#define isa_writew(val,p) \
+ (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \
+ : out_le16(isa_mtw((unsigned long)(p)),(val)))
+
+static inline void isa_delay(void)
+{
+ switch(ISA_TYPE)
+ {
+#ifdef CONFIG_Q40
+ case ISA_TYPE_Q40: isa_outb(0,0x80); break;
+#endif
+#ifdef CONFIG_GG2
+ case ISA_TYPE_GG2: break;
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+ case ISA_TYPE_AG: break;
+#endif
+ default: break; /* avoid warnings */
+ }
+}
+
+#define isa_inb_p(p) ({u8 v=isa_inb(p);isa_delay();v;})
+#define isa_outb_p(v,p) ({isa_outb((v),(p));isa_delay();})
+#define isa_inw_p(p) ({u16 v=isa_inw(p);isa_delay();v;})
+#define isa_outw_p(v,p) ({isa_outw((v),(p));isa_delay();})
+#define isa_inl_p(p) ({u32 v=isa_inl(p);isa_delay();v;})
+#define isa_outl_p(v,p) ({isa_outl((v),(p));isa_delay();})
+
+#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr))
+#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr))
+
+#define isa_insw(port, buf, nr) \
+ (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) : \
+ raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
+
+#define isa_outsw(port, buf, nr) \
+ (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) : \
+ raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
+
+#define isa_insl(port, buf, nr) \
+ (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) : \
+ raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
+
+#define isa_outsl(port, buf, nr) \
+ (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) : \
+ raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
+
+
+#define inb isa_inb
+#define inb_p isa_inb_p
+#define outb isa_outb
+#define outb_p isa_outb_p
+#define inw isa_inw
+#define inw_p isa_inw_p
+#define outw isa_outw
+#define outw_p isa_outw_p
+#define inl isa_inl
+#define inl_p isa_inl_p
+#define outl isa_outl
+#define outl_p isa_outl_p
+#define insb isa_insb
+#define insw isa_insw
+#define insl isa_insl
+#define outsb isa_outsb
+#define outsw isa_outsw
+#define outsl isa_outsl
+#define readb isa_readb
+#define readw isa_readw
+#define writeb isa_writeb
+#define writew isa_writew
+
+#else /* CONFIG_ISA */
+
+/*
+ * We need to define dummy functions for GENERIC_IOMAP support.
+ */
+#define inb(port) 0xff
+#define inb_p(port) 0xff
+#define outb(val,port) ((void)0)
+#define outb_p(val,port) ((void)0)
+#define inw(port) 0xffff
+#define outw(val,port) ((void)0)
+#define inl(port) 0xffffffffUL
+#define outl(val,port) ((void)0)
+
+#define insb(port,buf,nr) ((void)0)
+#define outsb(port,buf,nr) ((void)0)
+#define insw(port,buf,nr) ((void)0)
+#define outsw(port,buf,nr) ((void)0)
+#define insl(port,buf,nr) ((void)0)
+#define outsl(port,buf,nr) ((void)0)
+
+/*
+ * These should be valid on any ioremap()ed region
+ */
+#define readb(addr) in_8(addr)
+#define writeb(val,addr) out_8((addr),(val))
+#define readw(addr) in_le16(addr)
+#define writew(val,addr) out_le16((addr),(val))
+
+#endif /* CONFIG_ISA */
+
+#define readl(addr) in_le32(addr)
+#define writel(val,addr) out_le32((addr),(val))
+
+#define mmiowb()
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ __builtin_memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ __builtin_memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ __builtin_memcpy((void __force *) dst, src, count);
+}
+
+#ifndef CONFIG_SUN3
+#define IO_SPACE_LIMIT 0xffff
+#else
+#define IO_SPACE_LIMIT 0x0fffffff
+#endif
+
+#endif /* __KERNEL__ */
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* _IO_H */
--- /dev/null
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+ return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+ return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ * make the short names macros so specific devices
+ * can override them as required
+ */
+
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+#define inb(addr) readb(addr)
+#define inw(addr) readw(addr)
+#define inl(addr) readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Pages to physical address... */
+#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+#ifndef __ARCH_M68K_IOCTLS_H__
+#define __ARCH_M68K_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* __ARCH_M68K_IOCTLS_H__ */
--- /dev/null
+#ifndef __m68k_IPCBUF_H__
+#define __m68k_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* __m68k_IPCBUF_H__ */
--- /dev/null
+#ifdef __uClinux__
+#include "irq_no.h"
+#else
+#include "irq_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+#include <linux/linkage.h>
+#include <linux/hardirq.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#define NR_IRQS 200
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS 72
+#elif defined(CONFIG_Q40)
+#define NR_IRQS 43
+#elif defined(CONFIG_AMIGA)
+#define NR_IRQS 32
+#elif defined(CONFIG_APOLLO)
+#define NR_IRQS 24
+#elif defined(CONFIG_HP300)
+#define NR_IRQS 8
+#else
+#define NR_IRQS 0
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession. Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ_SPURIOUS 0
+
+#define IRQ_AUTO_1 1 /* level 1 interrupt */
+#define IRQ_AUTO_2 2 /* level 2 interrupt */
+#define IRQ_AUTO_3 3 /* level 3 interrupt */
+#define IRQ_AUTO_4 4 /* level 4 interrupt */
+#define IRQ_AUTO_5 5 /* level 5 interrupt */
+#define IRQ_AUTO_6 6 /* level 6 interrupt */
+#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
+
+#define IRQ_USER 8
+
+extern unsigned int irq_canonicalize(unsigned int irq);
+
+struct pt_regs;
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
+#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
+#define IRQ_FLG_FAST (0x0004)
+#define IRQ_FLG_SLOW (0x0008)
+#define IRQ_FLG_STD (0x8000) /* internally used */
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+ int (*handler)(int, void *);
+ void *dev_id;
+ struct irq_node *next;
+ unsigned long flags;
+ const char *devname;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+struct irq_handler {
+ int (*handler)(int, void *);
+ unsigned long flags;
+ void *dev_id;
+ const char *devname;
+};
+
+struct irq_controller {
+ const char *name;
+ spinlock_t lock;
+ int (*startup)(unsigned int irq);
+ void (*shutdown)(unsigned int irq);
+ void (*enable)(unsigned int irq);
+ void (*disable)(unsigned int irq);
+};
+
+extern int m68k_irq_startup(unsigned int);
+extern void m68k_irq_shutdown(unsigned int);
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
+ void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
+
+asmlinkage void m68k_handle_int(unsigned int);
+asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+
+#endif /* _M68K_IRQ_H_ */
--- /dev/null
+#ifndef _M68KNOMMU_IRQ_H_
+#define _M68KNOMMU_IRQ_H_
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define SYS_IRQS 256
+#define NR_IRQS SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS 8
+#define NR_IRQS (24 + SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+
+#define irq_canonicalize(irq) (irq)
+
+#endif /* _M68KNOMMU_IRQ_H_ */
--- /dev/null
+#include <asm-generic/irq_regs.h>
--- /dev/null
+#include <asm-generic/kdebug.h>
--- /dev/null
+#ifdef __uClinux__
+#include "kmap_types_no.h"
+#else
+#include "kmap_types_mm.h"
+#endif
--- /dev/null
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif /* __ASM_M68K_KMAP_TYPES_H */
--- /dev/null
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif
--- /dev/null
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
--- /dev/null
+#ifndef _ASM_M68K_LOCAL_H
+#define _ASM_M68K_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_M68K_LOCAL_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef m5206sim_h
+#define m5206sim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5206 SIM register set addresses.
+ */
+#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */
+#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */
+#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */
+#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */
+#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */
+
+#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/
+
+#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */
+
+#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */
+#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */
+#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */
+#define MCFSIM_DMCR 0xc6 /* Default control */
+
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */
+#else
+#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
+#endif
+
+#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */
+
+/*
+ * Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
+ /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
+ /* Clear to select T0 output */
+#endif
+
+/*
+ * Some symbol defines for the Interrupt Control Register
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */
+#endif
+
+/*
+ * Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define mcf_getipr() \
+ *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif /* m5206sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64
+#define MCFINT_UART0 26 /* Interrupt number for UART0 */
+#define MCFINT_UART1 27 /* Interrupt number for UART1 */
+#define MCFINT_UART2 28 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
+#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
+
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
+#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
+
+
+#define MCF_GPIO_PAR_UART (0xA4036)
+#define MCF_GPIO_PAR_FECI2C (0xA4033)
+#define MCF_GPIO_PAR_FEC (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
+
+#define ICR_INTRCONF 0x05
+#define MCFPIT_IMR MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif /* m520xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m523xsim.h -- ColdFire 523x System Integration Module support.
+ *
+ * (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m523xsim_h
+#define m523xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 523x SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
+#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
+
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif /* m523xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m5249sim_h
+#define m5249sim_h
+/****************************************************************************/
+
+/*
+ * Define the 5249 SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+/*
+ * General purpose IO registers (in MBAR2).
+ */
+#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */
+#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */
+#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */
+#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */
+#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */
+
+#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
+#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
+#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */
+
+#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */
+#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */
+#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */
+#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */
+#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */
+#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */
+#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */
+#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */
+
+#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */
+
+#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
+
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */
+
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ * The M5249C3 board needs a little help getting all its SIM devices
+ * initialized at kernel start time. dBUG doesn't set much up, so
+ * we need to do it manually.
+ */
+.macro m5249c3_setup
+ /*
+ * Set MBAR1 and MBAR2, just incase they are not set.
+ */
+ movel #0x10000001,%a0
+ movec %a0,%MBAR /* map MBAR region */
+ subql #1,%a0 /* get MBAR address in a0 */
+
+ movel #0x80000001,%a1
+ movec %a1,#3086 /* map MBAR2 region */
+ subql #1,%a1 /* get MBAR2 address in a1 */
+
+ /*
+ * Move secondary interrupts to base at 128.
+ */
+ moveb #0x80,%d0
+ moveb %d0,0x16b(%a1) /* interrupt base register */
+
+ /*
+ * Work around broken CSMR0/DRAM vector problem.
+ */
+ movel #0x001F0021,%d0 /* disable C/I bit */
+ movel %d0,0x84(%a0) /* set CSMR0 */
+
+ /*
+ * Disable the PLL firstly. (Who knows what state it is
+ * in here!).
+ */
+ movel 0x180(%a1),%d0 /* get current PLL value */
+ andl #0xfffffffe,%d0 /* PLL bypass first */
+ movel %d0,0x180(%a1) /* set PLL register */
+ nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+ /*
+ * Set initial clock frequency. This assumes M5249C3 board
+ * is fitted with 11.2896MHz crystal. It will program the
+ * PLL for 140MHz. Lets go fast :-)
+ */
+ movel #0x125a40f0,%d0 /* set for 140MHz */
+ movel %d0,0x180(%a1) /* set PLL register */
+ orl #0x1,%d0
+ movel %d0,0x180(%a1) /* set PLL register */
+#endif
+
+ /*
+ * Setup CS1 for ethernet controller.
+ * (Setup as per M5249C3 doco).
+ */
+ movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
+ movel %d0,0x8c(%a0)
+ movel #0x001f0021,%d0 /* CS1 size of 1Mb */
+ movel %d0,0x90(%a0)
+ movew #0x0080,%d0 /* CS1 = 16bit port, AA */
+ movew %d0,0x96(%a0)
+
+ /*
+ * Setup CS2 for IDE interface.
+ */
+ movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
+ movel %d0,0x98(%a0)
+ movel #0x001f0001,%d0 /* CS2 size of 1MB */
+ movel %d0,0x9c(%a0)
+ movew #0x0080,%d0 /* CS2 = 16bit, TA */
+ movew %d0,0xa2(%a0)
+
+ movel #0x00107000,%d0 /* IDEconfig1 */
+ movel %d0,0x18c(%a1)
+ movel #0x000c0400,%d0 /* IDEconfig2 */
+ movel %d0,0x190(%a1)
+
+ movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
+ orl %d0,0xc(%a1) /* function GPIO19 */
+ orl %d0,0x8(%a1) /* enable GPIO19 as output */
+ orl %d0,0x4(%a1) /* de-assert IDE reset */
+.endm
+
+#define PLATFORM_SETUP m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif /* m5249sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef m5272sim_h
+#define m5272sim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5272 SIM register set addresses.
+ */
+#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */
+#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/
+#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */
+#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */
+#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */
+
+#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */
+#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */
+#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */
+
+#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */
+#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */
+#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */
+#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */
+
+#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */
+#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */
+#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */
+#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */
+#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */
+#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */
+#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */
+#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */
+#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */
+#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */
+#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */
+#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */
+#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */
+#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */
+#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */
+#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */
+
+#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */
+#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */
+#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */
+#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */
+#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */
+#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */
+#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */
+#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */
+#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */
+#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */
+#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif /* m5272sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m527xsim_h
+#define m527xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5270/5271 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_UART1 14 /* Interrupt number for UART1 */
+#define MCFINT_UART2 15 /* Interrupt number for UART2 */
+#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
+
+/*
+ * SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271
+#define MCFSIM_DCR 0x40 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+#endif
+#ifdef CONFIG_M5275
+#define MCFSIM_DMR 0x40 /* SDRAM mode */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */
+#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */
+#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */
+#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
+#endif
+
+/*
+ * GPIO pins setups to enable the UARTs.
+ */
+#ifdef CONFIG_M5271
+#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */
+#define UART0_ENABLE_MASK 0x000f
+#define UART1_ENABLE_MASK 0x0ff0
+#define UART2_ENABLE_MASK 0x3000
+#endif
+#ifdef CONFIG_M5275
+#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */
+#define UART0_ENABLE_MASK 0x000f
+#define UART1_ENABLE_MASK 0x00f0
+#define UART2_ENABLE_MASK 0x3f00
+#endif
+
+/****************************************************************************/
+#endif /* m527xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m528xsim_h
+#define m528xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5280/5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
+
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+
+/*
+ * Derek Cheung - 6 Feb 2005
+ * add I2C and QSPI register definition using Freescale's MCF5282
+ */
+/* set Port AS pin for I2C or UART */
+#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
+
+/* Port UA Pin Assignment Register (8 Bit) */
+#define MCF5282_GPIO_PUAPAR 0x10005C
+
+/* Interrupt Mask Register Register Low */
+#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
+/* Interrupt Control Register 7 */
+#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
+
+
+
+/*********************************************************************
+*
+* Inter-IC (I2C) Module
+*
+*********************************************************************/
+/* Read/Write access macros for general use */
+#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
+#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
+#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
+#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
+#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
+
+#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
+
+#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
+#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
+#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
+#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
+#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
+#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
+
+#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
+#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
+#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
+#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
+#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
+#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
+#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
+
+
+
+/*********************************************************************
+*
+* Queued Serial Peripheral Interface (QSPI) Module
+*
+*********************************************************************/
+/* Derek - 21 Feb 2005 */
+/* change to the format used in I2C */
+/* Read/Write access macros for general use */
+#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
+#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
+#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
+#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
+#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
+#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
+#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
+
+/* Bit level definitions and macros */
+#define MCF5282_QSPI_QMR_MSTR (0x8000)
+#define MCF5282_QSPI_QMR_DOHIE (0x4000)
+#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
+#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
+#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
+#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
+#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
+#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
+#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
+#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
+#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
+#define MCF5282_QSPI_QMR_CPOL (0x0200)
+#define MCF5282_QSPI_QMR_CPHA (0x0100)
+#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
+
+#define MCF5282_QSPI_QDLYR_SPE (0x80)
+#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
+#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
+
+#define MCF5282_QSPI_QWR_HALT (0x8000)
+#define MCF5282_QSPI_QWR_WREN (0x4000)
+#define MCF5282_QSPI_QWR_WRTO (0x2000)
+#define MCF5282_QSPI_QWR_CSIV (0x1000)
+#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
+#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
+#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
+
+#define MCF5282_QSPI_QIR_WCEFB (0x8000)
+#define MCF5282_QSPI_QIR_ABRTB (0x4000)
+#define MCF5282_QSPI_QIR_ABRTL (0x1000)
+#define MCF5282_QSPI_QIR_WCEFE (0x0800)
+#define MCF5282_QSPI_QIR_ABRTE (0x0400)
+#define MCF5282_QSPI_QIR_SPIFE (0x0100)
+#define MCF5282_QSPI_QIR_WCEF (0x0008)
+#define MCF5282_QSPI_QIR_ABRT (0x0004)
+#define MCF5282_QSPI_QIR_SPIF (0x0001)
+
+#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
+
+#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
+#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
+#define MCF5282_QSPI_QCR_CONT (0x8000)
+#define MCF5282_QSPI_QCR_BITSE (0x4000)
+#define MCF5282_QSPI_QCR_DT (0x2000)
+#define MCF5282_QSPI_QCR_DSCK (0x1000)
+#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
+
+/****************************************************************************/
+#endif /* m528xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
+ * (C) Copyright 1999, Lineo (www.lineo.com)
+ *
+ * Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef m5307sim_h
+#define m5307sim_h
+/****************************************************************************/
+
+/*
+ * Define the 5307 SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+
+#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7 -- old mask 5307 */
+
+#define MCF5307_CS2 (0x400000)
+#define MCF5307_CS3 (0x600000)
+#define MCF5307_CS4 (0x800000)
+#define MCF5307_CS5 (0xA00000)
+#define MCF5307_CS6 (0xC00000)
+#define MCF5307_CS7 (0xE00000)
+
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */
+#endif
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ * Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
+ /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
+ /* Clear to select par I/O */
+
+/*
+ * Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4 0x80
+#define IRQ3_LEVEL6 0x40
+#define IRQ1_LEVEL2 0x20
+
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_EC (1<<31)
+#define CACR_ESB (1<<29)
+#define CACR_DPI (1<<28)
+#define CACR_HLCK (1<<27)
+#define CACR_CINVA (1<<24)
+#define CACR_DNFB (1<<10)
+#define CACR_DCM_WTHRU (0<<8)
+#define CACR_DCM_WBACK (1<<8)
+#define CACR_DCM_OFF_PRE (2<<8)
+#define CACR_DCM_OFF_IMP (3<<8)
+#define CACR_DW (1<<5)
+
+#define ACR_BASE_POS 24
+#define ACR_MASK_POS 16
+#define ACR_ENABLE (1<<15)
+#define ACR_USER (0<<13)
+#define ACR_SUPER (1<<13)
+#define ACR_ANY (2<<13)
+#define ACR_CM_WTHRU (0<<5)
+#define ACR_CM_WBACK (1<<5)
+#define ACR_CM_OFF_PRE (2<<5)
+#define ACR_CM_OFF_IMP (3<<5)
+#define ACR_WPROTECT (1<<2)
+
+/****************************************************************************/
+#endif /* m5307sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m532xsim.h -- ColdFire 5329 registers
+ */
+
+/****************************************************************************/
+#ifndef m532xsim_h
+#define m532xsim_h
+/****************************************************************************/
+
+#define MCF_REG32(x) (*(volatile unsigned long *)(x))
+#define MCF_REG16(x) (*(volatile unsigned short *)(x))
+#define MCF_REG08(x) (*(volatile unsigned char *)(x))
+
+#define MCFINT_VECBASE 64
+#define MCFINT_UART0 26 /* Interrupt number for UART0 */
+#define MCFINT_UART1 27 /* Interrupt number for UART1 */
+
+#define MCF_WTM_WCR MCF_REG16(0xFC098000)
+
+/*
+ * Define the 532x SIM register set addresses.
+ */
+#define MCFSIM_IPRL 0xFC048004
+#define MCFSIM_IPRH 0xFC048000
+#define MCFSIM_IPR MCFSIM_IPRL
+#define MCFSIM_IMRL 0xFC04800C
+#define MCFSIM_IMRH 0xFC048008
+#define MCFSIM_IMR MCFSIM_IMRL
+#define MCFSIM_ICR0 0xFC048040
+#define MCFSIM_ICR1 0xFC048041
+#define MCFSIM_ICR2 0xFC048042
+#define MCFSIM_ICR3 0xFC048043
+#define MCFSIM_ICR4 0xFC048044
+#define MCFSIM_ICR5 0xFC048045
+#define MCFSIM_ICR6 0xFC048046
+#define MCFSIM_ICR7 0xFC048047
+#define MCFSIM_ICR8 0xFC048048
+#define MCFSIM_ICR9 0xFC048049
+#define MCFSIM_ICR10 0xFC04804A
+#define MCFSIM_ICR11 0xFC04804B
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+
+#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */
+
+#define MCFSIM_IMR_SIMR0 0xFC04801C
+#define MCFSIM_IMR_SIMR1 0xFC04C01C
+#define MCFSIM_IMR_CIMR0 0xFC04801D
+#define MCFSIM_IMR_CIMR1 0xFC04C01D
+
+#define MCFSIM_ICR_TIMER1 (0xFC048040+32)
+#define MCFSIM_ICR_TIMER2 (0xFC048040+33)
+
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+#define mcf_getiprl() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
+
+#define mcf_getiprh() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
+
+
+#define mcf_enable_irq0(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
+
+#define mcf_enable_irq1(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
+
+#define mcf_disable_irq0(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
+
+#define mcf_disable_irq1(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_EC (1<<31)
+#define CACR_ESB (1<<29)
+#define CACR_DPI (1<<28)
+#define CACR_HLCK (1<<27)
+#define CACR_CINVA (1<<24)
+#define CACR_DNFB (1<<10)
+#define CACR_DCM_WTHRU (0<<8)
+#define CACR_DCM_WBACK (1<<8)
+#define CACR_DCM_OFF_PRE (2<<8)
+#define CACR_DCM_OFF_IMP (3<<8)
+#define CACR_DW (1<<5)
+
+#define ACR_BASE_POS 24
+#define ACR_MASK_POS 16
+#define ACR_ENABLE (1<<15)
+#define ACR_USER (0<<13)
+#define ACR_SUPER (1<<13)
+#define ACR_ANY (2<<13)
+#define ACR_CM_WTHRU (0<<5)
+#define ACR_CM_WBACK (1<<5)
+#define ACR_CM_OFF_PRE (2<<5)
+#define ACR_CM_OFF_IMP (3<<5)
+#define ACR_WPROTECT (1<<2)
+
+/*********************************************************************
+ *
+ * Inter-IC (I2C) Module
+ *
+ *********************************************************************/
+
+/* Read/Write access macros for general use */
+#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address
+#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider
+#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control
+#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status
+#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
+
+#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F))
+
+#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable
+#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable
+#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode
+#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode
+#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
+#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start
+
+#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit
+#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
+#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy
+#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost
+#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write
+#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt
+#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge
+
+#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053)
+
+
+/*
+ * The M5329EVB board needs a help getting its devices initialized
+ * at kernel start time if dBUG doesn't set it up (for example
+ * it is not used), so we need to do it manually.
+ */
+#ifdef __ASSEMBLER__
+.macro m5329EVB_setup
+ movel #0xFC098000, %a7
+ movel #0x0, (%a7)
+#define CORE_SRAM 0x80000000
+#define CORE_SRAM_SIZE 0x8000
+ movel #CORE_SRAM, %d0
+ addl #0x221, %d0
+ movec %d0,%RAMBAR1
+ movel #CORE_SRAM, %sp
+ addl #CORE_SRAM_SIZE, %sp
+ jsr sysinit
+.endm
+#define PLATFORM_SETUP m5329EVB_setup
+
+#endif /* __ASSEMBLER__ */
+
+/*********************************************************************
+ *
+ * Chip Configuration Module (CCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_CCM_CCR MCF_REG16(0xFC0A0004)
+#define MCF_CCM_RCON MCF_REG16(0xFC0A0008)
+#define MCF_CCM_CIR MCF_REG16(0xFC0A000A)
+#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010)
+#define MCF_CCM_CDR MCF_REG16(0xFC0A0012)
+#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014)
+#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016)
+
+/* Bit definitions and macros for MCF_CCM_CCR */
+#define MCF_CCM_CCR_RESERVED (0x0001)
+#define MCF_CCM_CCR_PLL_MODE (0x0003)
+#define MCF_CCM_CCR_OSC_MODE (0x0005)
+#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_CCR_LOAD (0x0021)
+#define MCF_CCM_CCR_LIMP (0x0041)
+#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_RCON */
+#define MCF_CCM_RCON_RESERVED (0x0001)
+#define MCF_CCM_RCON_PLL_MODE (0x0003)
+#define MCF_CCM_RCON_OSC_MODE (0x0005)
+#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_RCON_LOAD (0x0021)
+#define MCF_CCM_RCON_LIMP (0x0041)
+#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_CIR */
+#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0)
+#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6)
+
+/* Bit definitions and macros for MCF_CCM_MISCCR */
+#define MCF_CCM_MISCCR_USBSRC (0x0001)
+#define MCF_CCM_MISCCR_USBDIV (0x0002)
+#define MCF_CCM_MISCCR_SSI_SRC (0x0010)
+#define MCF_CCM_MISCCR_TIM_DMA (0x0020)
+#define MCF_CCM_MISCCR_SSI_PUS (0x0040)
+#define MCF_CCM_MISCCR_SSI_PUE (0x0080)
+#define MCF_CCM_MISCCR_LCD_CHEN (0x0100)
+#define MCF_CCM_MISCCR_LIMP (0x1000)
+#define MCF_CCM_MISCCR_PLL_LOCK (0x2000)
+
+/* Bit definitions and macros for MCF_CCM_CDR */
+#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0)
+#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8)
+
+/* Bit definitions and macros for MCF_CCM_UHCSR */
+#define MCF_CCM_UHCSR_XPDE (0x0001)
+#define MCF_CCM_UHCSR_UHMIE (0x0002)
+#define MCF_CCM_UHCSR_WKUP (0x0004)
+#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_CCM_UOCSR */
+#define MCF_CCM_UOCSR_XPDE (0x0001)
+#define MCF_CCM_UOCSR_UOMIE (0x0002)
+#define MCF_CCM_UOCSR_WKUP (0x0004)
+#define MCF_CCM_UOCSR_PWRFLT (0x0008)
+#define MCF_CCM_UOCSR_SEND (0x0010)
+#define MCF_CCM_UOCSR_VVLD (0x0020)
+#define MCF_CCM_UOCSR_BVLD (0x0040)
+#define MCF_CCM_UOCSR_AVLD (0x0080)
+#define MCF_CCM_UOCSR_DPPU (0x0100)
+#define MCF_CCM_UOCSR_DCR_VBUS (0x0200)
+#define MCF_CCM_UOCSR_CRG_VBUS (0x0400)
+#define MCF_CCM_UOCSR_DRV_VBUS (0x0800)
+#define MCF_CCM_UOCSR_DMPD (0x1000)
+#define MCF_CCM_UOCSR_DPPD (0x2000)
+#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14)
+
+/*********************************************************************
+ *
+ * DMA Timers (DTIM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000)
+#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002)
+#define MCF_DTIM0_DTER MCF_REG08(0xFC070003)
+#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004)
+#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008)
+#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C)
+#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000)
+#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002)
+#define MCF_DTIM1_DTER MCF_REG08(0xFC074003)
+#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004)
+#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008)
+#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C)
+#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000)
+#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002)
+#define MCF_DTIM2_DTER MCF_REG08(0xFC078003)
+#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004)
+#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008)
+#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C)
+#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000)
+#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002)
+#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003)
+#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004)
+#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008)
+#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C)
+#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000))
+#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000))
+#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000))
+#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000))
+#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000))
+#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_DTIM_DTMR */
+#define MCF_DTIM_DTMR_RST (0x0001)
+#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1)
+#define MCF_DTIM_DTMR_FRR (0x0008)
+#define MCF_DTIM_DTMR_ORRI (0x0010)
+#define MCF_DTIM_DTMR_OM (0x0020)
+#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6)
+#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8)
+#define MCF_DTIM_DTMR_CE_ANY (0x00C0)
+#define MCF_DTIM_DTMR_CE_FALL (0x0080)
+#define MCF_DTIM_DTMR_CE_RISE (0x0040)
+#define MCF_DTIM_DTMR_CE_NONE (0x0000)
+#define MCF_DTIM_DTMR_CLK_DTIN (0x0006)
+#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004)
+#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002)
+#define MCF_DTIM_DTMR_CLK_STOP (0x0000)
+
+/* Bit definitions and macros for MCF_DTIM_DTXMR */
+#define MCF_DTIM_DTXMR_MODE16 (0x01)
+#define MCF_DTIM_DTXMR_DMAEN (0x80)
+
+/* Bit definitions and macros for MCF_DTIM_DTER */
+#define MCF_DTIM_DTER_CAP (0x01)
+#define MCF_DTIM_DTER_REF (0x02)
+
+/* Bit definitions and macros for MCF_DTIM_DTRR */
+#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCR */
+#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCN */
+#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * FlexBus Chip Selects (FBCS)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000)
+#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004)
+#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008)
+#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C)
+#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010)
+#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014)
+#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018)
+#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C)
+#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020)
+#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024)
+#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028)
+#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C)
+#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030)
+#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034)
+#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038)
+#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C)
+#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040)
+#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044)
+#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C))
+#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C))
+#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C))
+
+/* Bit definitions and macros for MCF_FBCS_CSAR */
+#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
+
+/* Bit definitions and macros for MCF_FBCS_CSMR */
+#define MCF_FBCS_CSMR_V (0x00000001)
+#define MCF_FBCS_CSMR_WP (0x00000100)
+#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16)
+#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000)
+#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000)
+#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000)
+#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000)
+#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000)
+#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000)
+#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000)
+#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000)
+#define MCF_FBCS_CSMR_BAM_8M (0x007F0000)
+#define MCF_FBCS_CSMR_BAM_4M (0x003F0000)
+#define MCF_FBCS_CSMR_BAM_2M (0x001F0000)
+#define MCF_FBCS_CSMR_BAM_1M (0x000F0000)
+#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
+#define MCF_FBCS_CSMR_BAM_512K (0x00070000)
+#define MCF_FBCS_CSMR_BAM_256K (0x00030000)
+#define MCF_FBCS_CSMR_BAM_128K (0x00010000)
+#define MCF_FBCS_CSMR_BAM_64K (0x00000000)
+
+/* Bit definitions and macros for MCF_FBCS_CSCR */
+#define MCF_FBCS_CSCR_BSTW (0x00000008)
+#define MCF_FBCS_CSCR_BSTR (0x00000010)
+#define MCF_FBCS_CSCR_BEM (0x00000020)
+#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6)
+#define MCF_FBCS_CSCR_AA (0x00000100)
+#define MCF_FBCS_CSCR_SBM (0x00000200)
+#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10)
+#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16)
+#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18)
+#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20)
+#define MCF_FBCS_CSCR_SWSEN (0x00800000)
+#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26)
+#define MCF_FBCS_CSCR_PS_8 (0x0040)
+#define MCF_FBCS_CSCR_PS_16 (0x0080)
+#define MCF_FBCS_CSCR_PS_32 (0x0000)
+
+/*********************************************************************
+ *
+ * General Purpose I/O (GPIO)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000)
+#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001)
+#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002)
+#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003)
+#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004)
+#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005)
+#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006)
+#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007)
+#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009)
+#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A)
+#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B)
+#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D)
+#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E)
+#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F)
+#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010)
+#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011)
+#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014)
+#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015)
+#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016)
+#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017)
+#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018)
+#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019)
+#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A)
+#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B)
+#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C)
+#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E)
+#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F)
+#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021)
+#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022)
+#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023)
+#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024)
+#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025)
+#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028)
+#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029)
+#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A)
+#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B)
+#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C)
+#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D)
+#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E)
+#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F)
+#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031)
+#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032)
+#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033)
+#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035)
+#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036)
+#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037)
+#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038)
+#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039)
+#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C)
+#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D)
+#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E)
+#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F)
+#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040)
+#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041)
+#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042)
+#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043)
+#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045)
+#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046)
+#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047)
+#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049)
+#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A)
+#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B)
+#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C)
+#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D)
+#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050)
+#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051)
+#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052)
+#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053)
+#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054)
+#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055)
+#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056)
+#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058)
+#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A)
+#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C)
+#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D)
+#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E)
+#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060)
+#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064)
+#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065)
+#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068)
+#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069)
+#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A)
+#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B)
+#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C)
+#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D)
+#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E)
+#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F)
+#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070)
+#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071)
+#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
+#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01)
+#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02)
+#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04)
+#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08)
+#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10)
+#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20)
+#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40)
+#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
+#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01)
+#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02)
+#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04)
+#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08)
+#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10)
+#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20)
+#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40)
+#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
+#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01)
+#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02)
+#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04)
+#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08)
+#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
+#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BE */
+#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01)
+#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02)
+#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04)
+#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_CS */
+#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02)
+#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04)
+#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08)
+#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10)
+#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
+#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04)
+#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08)
+#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10)
+#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_UART */
+#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01)
+#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02)
+#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04)
+#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08)
+#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10)
+#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20)
+#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40)
+#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
+#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
+#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
+#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01)
+#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02)
+#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04)
+#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
+#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02)
+#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04)
+#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08)
+#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10)
+#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
+#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01)
+#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02)
+#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04)
+#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08)
+#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10)
+#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20)
+#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40)
+#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
+#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
+#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
+#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
+#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
+#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
+#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10)
+#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BE */
+#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01)
+#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02)
+#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04)
+#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_CS */
+#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02)
+#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04)
+#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08)
+#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10)
+#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
+#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080)
+#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_UART */
+#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002)
+#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004)
+#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
+#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
+#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001)
+#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002)
+#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004)
+#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008)
+#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040)
+#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080)
+#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
+#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
+#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
+#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
+#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0)
+#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
+#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
+#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
+#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
+#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
+#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
+#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
+#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0)
+
+/*********************************************************************
+ *
+ * Interrupt Controller (INTC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_INTC0_IPRH MCF_REG32(0xFC048000)
+#define MCF_INTC0_IPRL MCF_REG32(0xFC048004)
+#define MCF_INTC0_IMRH MCF_REG32(0xFC048008)
+#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C)
+#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010)
+#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014)
+#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A)
+#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C)
+#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D)
+#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E)
+#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F)
+#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040)
+#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041)
+#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042)
+#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043)
+#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044)
+#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045)
+#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046)
+#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047)
+#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048)
+#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049)
+#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A)
+#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B)
+#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C)
+#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D)
+#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E)
+#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F)
+#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050)
+#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051)
+#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052)
+#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053)
+#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054)
+#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055)
+#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056)
+#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057)
+#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058)
+#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059)
+#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A)
+#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B)
+#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C)
+#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D)
+#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E)
+#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F)
+#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060)
+#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061)
+#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062)
+#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063)
+#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064)
+#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065)
+#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066)
+#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067)
+#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068)
+#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069)
+#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A)
+#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B)
+#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C)
+#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D)
+#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E)
+#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F)
+#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070)
+#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071)
+#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072)
+#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073)
+#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074)
+#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075)
+#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076)
+#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077)
+#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078)
+#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079)
+#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A)
+#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B)
+#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C)
+#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D)
+#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E)
+#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F)
+#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001))
+#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0)
+#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4)
+#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8)
+#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC)
+#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0)
+#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4)
+#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8)
+#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC)
+#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004))
+#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000)
+#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004)
+#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008)
+#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C)
+#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010)
+#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014)
+#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A)
+#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C)
+#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D)
+#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E)
+#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F)
+#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040)
+#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041)
+#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042)
+#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043)
+#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044)
+#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045)
+#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046)
+#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047)
+#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048)
+#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049)
+#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A)
+#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B)
+#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C)
+#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D)
+#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E)
+#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F)
+#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050)
+#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051)
+#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052)
+#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053)
+#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054)
+#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055)
+#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056)
+#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057)
+#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058)
+#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059)
+#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A)
+#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B)
+#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C)
+#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D)
+#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E)
+#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F)
+#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060)
+#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061)
+#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062)
+#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063)
+#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064)
+#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065)
+#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066)
+#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067)
+#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068)
+#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069)
+#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A)
+#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B)
+#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C)
+#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D)
+#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E)
+#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F)
+#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070)
+#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071)
+#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072)
+#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073)
+#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074)
+#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075)
+#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076)
+#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077)
+#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078)
+#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079)
+#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A)
+#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B)
+#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C)
+#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D)
+#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E)
+#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F)
+#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001))
+#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0)
+#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4)
+#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8)
+#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC)
+#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0)
+#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4)
+#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8)
+#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC)
+#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004))
+#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000))
+#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000))
+#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000))
+#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000))
+#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000))
+#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000))
+#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000))
+#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000))
+#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000))
+#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000))
+#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000))
+#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000))
+#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000))
+#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000))
+#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000))
+#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000))
+#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000))
+#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000))
+#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000))
+#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000))
+#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000))
+#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000))
+#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000))
+#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000))
+#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000))
+#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000))
+#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000))
+#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000))
+#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000))
+#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000))
+#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000))
+#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000))
+#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000))
+#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000))
+#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000))
+#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000))
+#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000))
+#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000))
+#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000))
+#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000))
+#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000))
+#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000))
+#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000))
+#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000))
+#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000))
+#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000))
+#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000))
+#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000))
+#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000))
+#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000))
+#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000))
+#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000))
+#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000))
+#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000))
+#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000))
+#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000))
+#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000))
+#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000))
+#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000))
+#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000))
+#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000))
+#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000))
+#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000))
+#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000))
+#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000))
+#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000))
+#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000))
+#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000))
+#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000))
+#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000))
+#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000))
+#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000))
+#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000))
+#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000))
+#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000))
+#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000))
+#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000))
+#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000))
+#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000))
+#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000))
+#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000))
+#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000))
+#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_INTC_IPRH */
+#define MCF_INTC_IPRH_INT32 (0x00000001)
+#define MCF_INTC_IPRH_INT33 (0x00000002)
+#define MCF_INTC_IPRH_INT34 (0x00000004)
+#define MCF_INTC_IPRH_INT35 (0x00000008)
+#define MCF_INTC_IPRH_INT36 (0x00000010)
+#define MCF_INTC_IPRH_INT37 (0x00000020)
+#define MCF_INTC_IPRH_INT38 (0x00000040)
+#define MCF_INTC_IPRH_INT39 (0x00000080)
+#define MCF_INTC_IPRH_INT40 (0x00000100)
+#define MCF_INTC_IPRH_INT41 (0x00000200)
+#define MCF_INTC_IPRH_INT42 (0x00000400)
+#define MCF_INTC_IPRH_INT43 (0x00000800)
+#define MCF_INTC_IPRH_INT44 (0x00001000)
+#define MCF_INTC_IPRH_INT45 (0x00002000)
+#define MCF_INTC_IPRH_INT46 (0x00004000)
+#define MCF_INTC_IPRH_INT47 (0x00008000)
+#define MCF_INTC_IPRH_INT48 (0x00010000)
+#define MCF_INTC_IPRH_INT49 (0x00020000)
+#define MCF_INTC_IPRH_INT50 (0x00040000)
+#define MCF_INTC_IPRH_INT51 (0x00080000)
+#define MCF_INTC_IPRH_INT52 (0x00100000)
+#define MCF_INTC_IPRH_INT53 (0x00200000)
+#define MCF_INTC_IPRH_INT54 (0x00400000)
+#define MCF_INTC_IPRH_INT55 (0x00800000)
+#define MCF_INTC_IPRH_INT56 (0x01000000)
+#define MCF_INTC_IPRH_INT57 (0x02000000)
+#define MCF_INTC_IPRH_INT58 (0x04000000)
+#define MCF_INTC_IPRH_INT59 (0x08000000)
+#define MCF_INTC_IPRH_INT60 (0x10000000)
+#define MCF_INTC_IPRH_INT61 (0x20000000)
+#define MCF_INTC_IPRH_INT62 (0x40000000)
+#define MCF_INTC_IPRH_INT63 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IPRL */
+#define MCF_INTC_IPRL_INT0 (0x00000001)
+#define MCF_INTC_IPRL_INT1 (0x00000002)
+#define MCF_INTC_IPRL_INT2 (0x00000004)
+#define MCF_INTC_IPRL_INT3 (0x00000008)
+#define MCF_INTC_IPRL_INT4 (0x00000010)
+#define MCF_INTC_IPRL_INT5 (0x00000020)
+#define MCF_INTC_IPRL_INT6 (0x00000040)
+#define MCF_INTC_IPRL_INT7 (0x00000080)
+#define MCF_INTC_IPRL_INT8 (0x00000100)
+#define MCF_INTC_IPRL_INT9 (0x00000200)
+#define MCF_INTC_IPRL_INT10 (0x00000400)
+#define MCF_INTC_IPRL_INT11 (0x00000800)
+#define MCF_INTC_IPRL_INT12 (0x00001000)
+#define MCF_INTC_IPRL_INT13 (0x00002000)
+#define MCF_INTC_IPRL_INT14 (0x00004000)
+#define MCF_INTC_IPRL_INT15 (0x00008000)
+#define MCF_INTC_IPRL_INT16 (0x00010000)
+#define MCF_INTC_IPRL_INT17 (0x00020000)
+#define MCF_INTC_IPRL_INT18 (0x00040000)
+#define MCF_INTC_IPRL_INT19 (0x00080000)
+#define MCF_INTC_IPRL_INT20 (0x00100000)
+#define MCF_INTC_IPRL_INT21 (0x00200000)
+#define MCF_INTC_IPRL_INT22 (0x00400000)
+#define MCF_INTC_IPRL_INT23 (0x00800000)
+#define MCF_INTC_IPRL_INT24 (0x01000000)
+#define MCF_INTC_IPRL_INT25 (0x02000000)
+#define MCF_INTC_IPRL_INT26 (0x04000000)
+#define MCF_INTC_IPRL_INT27 (0x08000000)
+#define MCF_INTC_IPRL_INT28 (0x10000000)
+#define MCF_INTC_IPRL_INT29 (0x20000000)
+#define MCF_INTC_IPRL_INT30 (0x40000000)
+#define MCF_INTC_IPRL_INT31 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRH */
+#define MCF_INTC_IMRH_INT_MASK32 (0x00000001)
+#define MCF_INTC_IMRH_INT_MASK33 (0x00000002)
+#define MCF_INTC_IMRH_INT_MASK34 (0x00000004)
+#define MCF_INTC_IMRH_INT_MASK35 (0x00000008)
+#define MCF_INTC_IMRH_INT_MASK36 (0x00000010)
+#define MCF_INTC_IMRH_INT_MASK37 (0x00000020)
+#define MCF_INTC_IMRH_INT_MASK38 (0x00000040)
+#define MCF_INTC_IMRH_INT_MASK39 (0x00000080)
+#define MCF_INTC_IMRH_INT_MASK40 (0x00000100)
+#define MCF_INTC_IMRH_INT_MASK41 (0x00000200)
+#define MCF_INTC_IMRH_INT_MASK42 (0x00000400)
+#define MCF_INTC_IMRH_INT_MASK43 (0x00000800)
+#define MCF_INTC_IMRH_INT_MASK44 (0x00001000)
+#define MCF_INTC_IMRH_INT_MASK45 (0x00002000)
+#define MCF_INTC_IMRH_INT_MASK46 (0x00004000)
+#define MCF_INTC_IMRH_INT_MASK47 (0x00008000)
+#define MCF_INTC_IMRH_INT_MASK48 (0x00010000)
+#define MCF_INTC_IMRH_INT_MASK49 (0x00020000)
+#define MCF_INTC_IMRH_INT_MASK50 (0x00040000)
+#define MCF_INTC_IMRH_INT_MASK51 (0x00080000)
+#define MCF_INTC_IMRH_INT_MASK52 (0x00100000)
+#define MCF_INTC_IMRH_INT_MASK53 (0x00200000)
+#define MCF_INTC_IMRH_INT_MASK54 (0x00400000)
+#define MCF_INTC_IMRH_INT_MASK55 (0x00800000)
+#define MCF_INTC_IMRH_INT_MASK56 (0x01000000)
+#define MCF_INTC_IMRH_INT_MASK57 (0x02000000)
+#define MCF_INTC_IMRH_INT_MASK58 (0x04000000)
+#define MCF_INTC_IMRH_INT_MASK59 (0x08000000)
+#define MCF_INTC_IMRH_INT_MASK60 (0x10000000)
+#define MCF_INTC_IMRH_INT_MASK61 (0x20000000)
+#define MCF_INTC_IMRH_INT_MASK62 (0x40000000)
+#define MCF_INTC_IMRH_INT_MASK63 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRL */
+#define MCF_INTC_IMRL_INT_MASK0 (0x00000001)
+#define MCF_INTC_IMRL_INT_MASK1 (0x00000002)
+#define MCF_INTC_IMRL_INT_MASK2 (0x00000004)
+#define MCF_INTC_IMRL_INT_MASK3 (0x00000008)
+#define MCF_INTC_IMRL_INT_MASK4 (0x00000010)
+#define MCF_INTC_IMRL_INT_MASK5 (0x00000020)
+#define MCF_INTC_IMRL_INT_MASK6 (0x00000040)
+#define MCF_INTC_IMRL_INT_MASK7 (0x00000080)
+#define MCF_INTC_IMRL_INT_MASK8 (0x00000100)
+#define MCF_INTC_IMRL_INT_MASK9 (0x00000200)
+#define MCF_INTC_IMRL_INT_MASK10 (0x00000400)
+#define MCF_INTC_IMRL_INT_MASK11 (0x00000800)
+#define MCF_INTC_IMRL_INT_MASK12 (0x00001000)
+#define MCF_INTC_IMRL_INT_MASK13 (0x00002000)
+#define MCF_INTC_IMRL_INT_MASK14 (0x00004000)
+#define MCF_INTC_IMRL_INT_MASK15 (0x00008000)
+#define MCF_INTC_IMRL_INT_MASK16 (0x00010000)
+#define MCF_INTC_IMRL_INT_MASK17 (0x00020000)
+#define MCF_INTC_IMRL_INT_MASK18 (0x00040000)
+#define MCF_INTC_IMRL_INT_MASK19 (0x00080000)
+#define MCF_INTC_IMRL_INT_MASK20 (0x00100000)
+#define MCF_INTC_IMRL_INT_MASK21 (0x00200000)
+#define MCF_INTC_IMRL_INT_MASK22 (0x00400000)
+#define MCF_INTC_IMRL_INT_MASK23 (0x00800000)
+#define MCF_INTC_IMRL_INT_MASK24 (0x01000000)
+#define MCF_INTC_IMRL_INT_MASK25 (0x02000000)
+#define MCF_INTC_IMRL_INT_MASK26 (0x04000000)
+#define MCF_INTC_IMRL_INT_MASK27 (0x08000000)
+#define MCF_INTC_IMRL_INT_MASK28 (0x10000000)
+#define MCF_INTC_IMRL_INT_MASK29 (0x20000000)
+#define MCF_INTC_IMRL_INT_MASK30 (0x40000000)
+#define MCF_INTC_IMRL_INT_MASK31 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCH */
+#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001)
+#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002)
+#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004)
+#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008)
+#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010)
+#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020)
+#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040)
+#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080)
+#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100)
+#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200)
+#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400)
+#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800)
+#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000)
+#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000)
+#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000)
+#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000)
+#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000)
+#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000)
+#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000)
+#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000)
+#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000)
+#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000)
+#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000)
+#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000)
+#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000)
+#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000)
+#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000)
+#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000)
+#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000)
+#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000)
+#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000)
+#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCL */
+#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001)
+#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002)
+#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004)
+#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008)
+#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010)
+#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020)
+#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040)
+#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080)
+#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100)
+#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200)
+#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400)
+#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800)
+#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000)
+#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000)
+#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000)
+#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000)
+#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000)
+#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000)
+#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000)
+#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000)
+#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000)
+#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000)
+#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000)
+#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000)
+#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000)
+#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000)
+#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000)
+#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000)
+#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000)
+#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000)
+#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000)
+#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_ICONFIG */
+#define MCF_INTC_ICONFIG_EMASK (0x0020)
+#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200)
+#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400)
+#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800)
+#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000)
+#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000)
+#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000)
+#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000)
+
+/* Bit definitions and macros for MCF_INTC_SIMR */
+#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CIMR */
+#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CLMASK */
+#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SLMASK */
+#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_ICR */
+#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SWIACK */
+#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_INTC_LIACK */
+#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0)
+
+/********************************************************************/
+/*********************************************************************
+*
+* LCD Controller (LCDC)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000)
+#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004)
+#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008)
+#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C)
+#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010)
+#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014)
+#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018)
+#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C)
+#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020)
+#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024)
+#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028)
+#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C)
+#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030)
+#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034)
+#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038)
+#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C)
+#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040)
+#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050)
+#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054)
+#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058)
+#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C)
+#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060)
+#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064)
+#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068)
+#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800)
+#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00)
+
+/* Bit definitions and macros for MCF_LCDC_LSSAR */
+#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LSR */
+#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LVPWR */
+#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LCPR */
+#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16)
+#define MCF_LCDC_LCPR_OP (0x10000000)
+#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30)
+#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000)
+#define MCF_LCDC_LCPR_CC_OR (0x40000000)
+#define MCF_LCDC_LCPR_CC_XOR (0x80000000)
+#define MCF_LCDC_LCPR_CC_AND (0xC0000000)
+#define MCF_LCDC_LCPR_OP_ON (0x10000000)
+#define MCF_LCDC_LCPR_OP_OFF (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCWHBR */
+#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24)
+#define MCF_LCDC_LCWHBR_BK_EN (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCCMR */
+#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12)
+
+/* Bit definitions and macros for MCF_LCDC_LPCR */
+#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LPCR_SHARP (0x00000040)
+#define MCF_LCDC_LPCR_SCLKSEL (0x00000080)
+#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8)
+#define MCF_LCDC_LPCR_ACDSEL (0x00008000)
+#define MCF_LCDC_LPCR_REV_VS (0x00010000)
+#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000)
+#define MCF_LCDC_LPCR_ENDSEL (0x00040000)
+#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000)
+#define MCF_LCDC_LPCR_OEPOL (0x00100000)
+#define MCF_LCDC_LPCR_CLKPOL (0x00200000)
+#define MCF_LCDC_LPCR_LPPOL (0x00400000)
+#define MCF_LCDC_LPCR_FLM (0x00800000)
+#define MCF_LCDC_LPCR_PIXPOL (0x01000000)
+#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25)
+#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28)
+#define MCF_LCDC_LPCR_COLOR (0x40000000)
+#define MCF_LCDC_LPCR_TFT (0x80000000)
+#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000)
+#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000)
+#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000)
+#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000)
+#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000)
+#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000)
+#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000)
+#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000)
+#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000)
+#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000)
+#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000)
+#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000)
+#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000)
+#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000)
+
+#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30)
+
+/* Bit definitions and macros for MCF_LCDC_LHCR */
+#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LVCR */
+#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LPOR */
+#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LPCCR */
+#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LPCCR_CC_EN (0x00000100)
+#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9)
+#define MCF_LCDC_LPCCR_LDMSK (0x00008000)
+#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16)
+#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000)
+#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000)
+#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000)
+
+/* Bit definitions and macros for MCF_LCDC_LDCR */
+#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LDCR_BURST (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LRMCR */
+#define MCF_LCDC_LRMCR_SEL_REF (0x00000001)
+
+/* Bit definitions and macros for MCF_LCDC_LICR */
+#define MCF_LCDC_LICR_INTCON (0x00000001)
+#define MCF_LCDC_LICR_INTSYN (0x00000004)
+#define MCF_LCDC_LICR_GW_INT_CON (0x00000010)
+
+/* Bit definitions and macros for MCF_LCDC_LIER */
+#define MCF_LCDC_LIER_BOF_EN (0x00000001)
+#define MCF_LCDC_LIER_EOF_EN (0x00000002)
+#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004)
+#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008)
+#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010)
+#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020)
+#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040)
+#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LISR */
+#define MCF_LCDC_LISR_BOF (0x00000001)
+#define MCF_LCDC_LISR_EOF (0x00000002)
+#define MCF_LCDC_LISR_ERR_RES (0x00000004)
+#define MCF_LCDC_LISR_UDR_ERR (0x00000008)
+#define MCF_LCDC_LISR_GW_BOF (0x00000010)
+#define MCF_LCDC_LISR_GW_EOF (0x00000020)
+#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040)
+#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSAR */
+#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSR */
+#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
+#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPOR */
+#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPR */
+#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16)
+
+/* Bit definitions and macros for MCF_LCDC_LGWCR */
+#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12)
+#define MCF_LCDC_LGWCR_GW_RVS (0x00200000)
+#define MCF_LCDC_LGWCR_GWE (0x00400000)
+#define MCF_LCDC_LGWCR_GWCKE (0x00800000)
+#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24)
+
+/* Bit definitions and macros for MCF_LCDC_LGWDCR */
+#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LGWDCR_GWBT (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LSCR */
+#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26)
+#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16)
+#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
+#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4)
+#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
+#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
+#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * Phase Locked Loop (PLL)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_PLL_PODR MCF_REG08(0xFC0C0000)
+#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004)
+#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008)
+#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C)
+
+/* Bit definitions and macros for MCF_PLL_PODR */
+#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0)
+#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4)
+
+/* Bit definitions and macros for MCF_PLL_PLLCR */
+#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0)
+#define MCF_PLL_PLLCR_DITHEN (0x80)
+
+/* Bit definitions and macros for MCF_PLL_PMDR */
+#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_PLL_PFDR */
+#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0)
+
+/*********************************************************************
+ *
+ * System Control Module Registers (SCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SCM_MPR MCF_REG32(0xFC000000)
+#define MCF_SCM_PACRA MCF_REG32(0xFC000020)
+#define MCF_SCM_PACRB MCF_REG32(0xFC000024)
+#define MCF_SCM_PACRC MCF_REG32(0xFC000028)
+#define MCF_SCM_PACRD MCF_REG32(0xFC00002C)
+#define MCF_SCM_PACRE MCF_REG32(0xFC000040)
+#define MCF_SCM_PACRF MCF_REG32(0xFC000044)
+
+#define MCF_SCM_BCR MCF_REG32(0xFC040024)
+
+/*********************************************************************
+ *
+ * SDRAM Controller (SDRAMC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000)
+#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004)
+#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008)
+#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C)
+#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080)
+#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100)
+#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110)
+#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114)
+#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118)
+#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C)
+#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004))
+
+/* Bit definitions and macros for MCF_SDRAMC_SDMR */
+#define MCF_SDRAMC_SDMR_CMD (0x00010000)
+#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18)
+#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30)
+#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000)
+#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCR */
+#define MCF_SDRAMC_SDCR_IPALL (0x00000002)
+#define MCF_SDRAMC_SDCR_IREF (0x00000004)
+#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12)
+#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16)
+#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000)
+#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24)
+#define MCF_SDRAMC_SDCR_REF (0x10000000)
+#define MCF_SDRAMC_SDCR_DDR (0x20000000)
+#define MCF_SDRAMC_SDCR_CKE (0x40000000)
+#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000)
+#define MCF_SDRAMC_SDCR_PS_16 (0x00002000)
+#define MCF_SDRAMC_SDCR_PS_32 (0x00000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
+#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4)
+#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12)
+#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16)
+#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24)
+#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
+#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16)
+#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24)
+#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28)
+
+/* Device Errata - LIMP mode work around */
+#define MCF_SDRAMC_REFRESH (0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDDS */
+#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0)
+#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2)
+#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4)
+#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6)
+#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCS */
+#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0)
+#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20)
+#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
+#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000)
+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
+
+/*********************************************************************
+ *
+ * FlexCAN module registers
+ *
+ *********************************************************************/
+#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800)
+#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00)
+#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04)
+#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08)
+#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10)
+#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14)
+#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18)
+#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
+#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20)
+#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28)
+#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30)
+
+#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
+#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
+#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
+
+/*
+ * FlexCAN Module Configuration Register
+ */
+#define CANMCR_MDIS (0x80000000)
+#define CANMCR_FRZ (0x40000000)
+#define CANMCR_HALT (0x10000000)
+#define CANMCR_SOFTRST (0x02000000)
+#define CANMCR_FRZACK (0x01000000)
+#define CANMCR_SUPV (0x00800000)
+#define CANMCR_MAXMB(x) ((x)&0x0F)
+
+/*
+ * FlexCAN Control Register
+ */
+#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
+#define CANCTRL_RJW(x) (((x)&0x03)<<22)
+#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
+#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
+#define CANCTRL_BOFFMSK (0x00008000)
+#define CANCTRL_ERRMSK (0x00004000)
+#define CANCTRL_CLKSRC (0x00002000)
+#define CANCTRL_LPB (0x00001000)
+#define CANCTRL_SAMP (0x00000080)
+#define CANCTRL_BOFFREC (0x00000040)
+#define CANCTRL_TSYNC (0x00000020)
+#define CANCTRL_LBUF (0x00000010)
+#define CANCTRL_LOM (0x00000008)
+#define CANCTRL_PROPSEG(x) ((x)&0x07)
+
+/*
+ * FlexCAN Error Counter Register
+ */
+#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
+#define ERRCNT_TXECTR(x) ((x)&0xFF)
+
+/*
+ * FlexCAN Error and Status Register
+ */
+#define ERRSTAT_BITERR(x) (((x)&0x03)<<14)
+#define ERRSTAT_ACKERR (0x00002000)
+#define ERRSTAT_CRCERR (0x00001000)
+#define ERRSTAT_FRMERR (0x00000800)
+#define ERRSTAT_STFERR (0x00000400)
+#define ERRSTAT_TXWRN (0x00000200)
+#define ERRSTAT_RXWRN (0x00000100)
+#define ERRSTAT_IDLE (0x00000080)
+#define ERRSTAT_TXRX (0x00000040)
+#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4)
+#define ERRSTAT_BOFFINT (0x00000004)
+#define ERRSTAT_ERRINT (0x00000002)
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMASK_BUF15M (0x8000)
+#define IMASK_BUF14M (0x4000)
+#define IMASK_BUF13M (0x2000)
+#define IMASK_BUF12M (0x1000)
+#define IMASK_BUF11M (0x0800)
+#define IMASK_BUF10M (0x0400)
+#define IMASK_BUF9M (0x0200)
+#define IMASK_BUF8M (0x0100)
+#define IMASK_BUF7M (0x0080)
+#define IMASK_BUF6M (0x0040)
+#define IMASK_BUF5M (0x0020)
+#define IMASK_BUF4M (0x0010)
+#define IMASK_BUF3M (0x0008)
+#define IMASK_BUF2M (0x0004)
+#define IMASK_BUF1M (0x0002)
+#define IMASK_BUF0M (0x0001)
+#define IMASK_BUFnM(x) (0x1<<(x))
+#define IMASK_BUFF_ENABLE_ALL (0x1111)
+#define IMASK_BUFF_DISABLE_ALL (0x0000)
+
+/*
+ * Interrupt Flag Register
+ */
+#define IFLAG_BUF15M (0x8000)
+#define IFLAG_BUF14M (0x4000)
+#define IFLAG_BUF13M (0x2000)
+#define IFLAG_BUF12M (0x1000)
+#define IFLAG_BUF11M (0x0800)
+#define IFLAG_BUF10M (0x0400)
+#define IFLAG_BUF9M (0x0200)
+#define IFLAG_BUF8M (0x0100)
+#define IFLAG_BUF7M (0x0080)
+#define IFLAG_BUF6M (0x0040)
+#define IFLAG_BUF5M (0x0020)
+#define IFLAG_BUF4M (0x0010)
+#define IFLAG_BUF3M (0x0008)
+#define IFLAG_BUF2M (0x0004)
+#define IFLAG_BUF1M (0x0002)
+#define IFLAG_BUF0M (0x0001)
+#define IFLAG_BUFF_SET_ALL (0xFFFF)
+#define IFLAG_BUFF_CLEAR_ALL (0x0000)
+#define IFLAG_BUFnM(x) (0x1<<(x))
+
+/*
+ * Message Buffers
+ */
+#define MB_CNT_CODE(x) (((x)&0x0F)<<24)
+#define MB_CNT_SRR (0x00400000)
+#define MB_CNT_IDE (0x00200000)
+#define MB_CNT_RTR (0x00100000)
+#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16)
+#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF)
+#define MB_ID_STD(x) (((x)&0x07FF)<<18)
+#define MB_ID_EXT(x) ((x)&0x3FFFF)
+
+/*********************************************************************
+ *
+ * Edge Port Module (EPORT)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000)
+#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
+#define MCF_EPORT_EPIER MCF_REG08(0xFC094003)
+#define MCF_EPORT_EPDR MCF_REG08(0xFC094004)
+#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005)
+#define MCF_EPORT_EPFR MCF_REG08(0xFC094006)
+
+/* Bit definitions and macros for MCF_EPORT_EPPAR */
+#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
+#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
+#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
+#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
+#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
+#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
+#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
+#define MCF_EPORT_EPPAR_LEVEL (0)
+#define MCF_EPORT_EPPAR_RISING (1)
+#define MCF_EPORT_EPPAR_FALLING (2)
+#define MCF_EPORT_EPPAR_BOTH (3)
+#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000)
+#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000)
+#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000)
+#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000)
+#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000)
+#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000)
+#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400)
+#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800)
+#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00)
+#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100)
+#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200)
+#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300)
+#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040)
+#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080)
+#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0)
+#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010)
+#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020)
+#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030)
+#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004)
+#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008)
+#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C)
+
+/* Bit definitions and macros for MCF_EPORT_EPDDR */
+#define MCF_EPORT_EPDDR_EPDD1 (0x02)
+#define MCF_EPORT_EPDDR_EPDD2 (0x04)
+#define MCF_EPORT_EPDDR_EPDD3 (0x08)
+#define MCF_EPORT_EPDDR_EPDD4 (0x10)
+#define MCF_EPORT_EPDDR_EPDD5 (0x20)
+#define MCF_EPORT_EPDDR_EPDD6 (0x40)
+#define MCF_EPORT_EPDDR_EPDD7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPIER */
+#define MCF_EPORT_EPIER_EPIE1 (0x02)
+#define MCF_EPORT_EPIER_EPIE2 (0x04)
+#define MCF_EPORT_EPIER_EPIE3 (0x08)
+#define MCF_EPORT_EPIER_EPIE4 (0x10)
+#define MCF_EPORT_EPIER_EPIE5 (0x20)
+#define MCF_EPORT_EPIER_EPIE6 (0x40)
+#define MCF_EPORT_EPIER_EPIE7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPDR */
+#define MCF_EPORT_EPDR_EPD1 (0x02)
+#define MCF_EPORT_EPDR_EPD2 (0x04)
+#define MCF_EPORT_EPDR_EPD3 (0x08)
+#define MCF_EPORT_EPDR_EPD4 (0x10)
+#define MCF_EPORT_EPDR_EPD5 (0x20)
+#define MCF_EPORT_EPDR_EPD6 (0x40)
+#define MCF_EPORT_EPDR_EPD7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPPDR */
+#define MCF_EPORT_EPPDR_EPPD1 (0x02)
+#define MCF_EPORT_EPPDR_EPPD2 (0x04)
+#define MCF_EPORT_EPPDR_EPPD3 (0x08)
+#define MCF_EPORT_EPPDR_EPPD4 (0x10)
+#define MCF_EPORT_EPPDR_EPPD5 (0x20)
+#define MCF_EPORT_EPPDR_EPPD6 (0x40)
+#define MCF_EPORT_EPPDR_EPPD7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPFR */
+#define MCF_EPORT_EPFR_EPF1 (0x02)
+#define MCF_EPORT_EPFR_EPF2 (0x04)
+#define MCF_EPORT_EPFR_EPF3 (0x08)
+#define MCF_EPORT_EPFR_EPF4 (0x10)
+#define MCF_EPORT_EPFR_EPF5 (0x20)
+#define MCF_EPORT_EPFR_EPF6 (0x40)
+#define MCF_EPORT_EPFR_EPF7 (0x80)
+
+/********************************************************************/
+#endif /* m532xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
+ *
+ * Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef m5407sim_h
+#define m5407sim_h
+/****************************************************************************/
+
+/*
+ * Define the 5407 SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+
+#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
+
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ * Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
+ /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
+ /* Clear to select par I/O */
+
+/*
+ * Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4 0x80
+#define IRQ3_LEVEL6 0x40
+#define IRQ1_LEVEL2 0x20
+
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_DEC 0x80000000 /* Enable data cache */
+#define CACR_DWP 0x40000000 /* Data write protection */
+#define CACR_DESB 0x20000000 /* Enable data store buffer */
+#define CACR_DDPI 0x10000000 /* Disable CPUSHL */
+#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
+#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
+#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
+#define CACR_DDCM_P 0x04000000 /* No cache, precise */
+#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
+#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
+#define CACR_BEC 0x00080000 /* Enable branch cache */
+#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
+#define CACR_IEC 0x00008000 /* Enable instruction cache */
+#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
+#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
+#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
+#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
+#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
+
+#define ACR_BASE_POS 24 /* Address Base */
+#define ACR_MASK_POS 16 /* Address Mask */
+#define ACR_ENABLE 0x00008000 /* Enable address */
+#define ACR_USER 0x00000000 /* User mode access only */
+#define ACR_SUPER 0x00002000 /* Supervisor mode only */
+#define ACR_ANY 0x00004000 /* Match any access mode */
+#define ACR_CM_WT 0x00000000 /* Write through mode */
+#define ACR_CM_CP 0x00000020 /* Copyback mode */
+#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
+#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
+#define ACR_WPROTECT 0x00000004 /* Write protect */
+
+/****************************************************************************/
+#endif /* m5407sim_h */
--- /dev/null
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT 4
+
+/* see MC68360 User's Manual, p. 7-377 */
+#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
--- /dev/null
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R 0x8000 /* ready bit */
+#define E_T_PAD 0x4000 /* short frame padding */
+#define T_W 0x2000 /* wrap bit */
+#define T_I 0x1000 /* interrupt on completion */
+#define T_L 0x0800 /* last in frame */
+#define T_TC 0x0400 /* transmit CRC (when last) */
+
+#define T_DEF 0x0200 /* defer indication */
+#define T_HB 0x0100 /* heartbeat */
+#define T_LC 0x0080 /* error: late collision */
+#define T_RL 0x0040 /* error: retransmission limit */
+#define T_RC 0x003c /* retry count */
+#define T_UN 0x0002 /* error: underrun */
+#define T_CSL 0x0001 /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E 0x8000 /* buffer empty */
+#define R_W 0x2000 /* wrap bit */
+#define R_I 0x1000 /* interrupt on reception */
+#define R_L 0x0800 /* last BD in frame */
+#define R_F 0x0400 /* first BD in frame */
+#define R_M 0x0100 /* received because of promisc. mode */
+
+#define R_LG 0x0020 /* frame too long */
+#define R_NO 0x0010 /* non-octet aligned */
+#define R_SH 0x0008 /* short frame */
+#define R_CR 0x0004 /* receive CRC error */
+#define R_OV 0x0002 /* receive overrun */
+#define R_CL 0x0001 /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA 0x0080 /* graceful stop complete */
+#define ETHERNET_TXE 0x0010 /* transmit error */
+#define ETHERNET_RXF 0x0008 /* receive frame */
+#define ETHERNET_BSY 0x0004 /* busy condition */
+#define ETHERNET_TXB 0x0002 /* transmit buffer */
+#define ETHERNET_RXB 0x0001 /* receive buffer */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC 0x8000 /* heartbeat checking */
+#define ETHER_FC 0x4000 /* force collision */
+#define ETHER_RSH 0x2000 /* receive short frames */
+#define ETHER_IAM 0x1000 /* individual address mode */
+#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */
+#define ETHER_PRO 0x0200 /* promiscuous */
+#define ETHER_BRO 0x0100 /* broadcast address */
+#define ETHER_SBT 0x0080 /* stop backoff timer */
+#define ETHER_LPB 0x0040 /* Loop Back Mode */
+#define ETHER_SIP 0x0020 /* sample input pins */
+#define ETHER_LCW 0x0010 /* late collision window */
+#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */
+#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */
+#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */
+#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */
+#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */
+#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */
+#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */
+#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4 /* Length in bytes of CRC */
+#define C_PRES 0xffffffff /* preform 32 bit CRC */
+#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */
+#define CRCEC 0x00000000
+#define ALEC 0x00000000
+#define DISFC 0x00000000
+#define PADS 0x00000000
+#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee /* 1518 max frame size */
+#define MINFLR 0x0040 /* Minimum frame size 64 */
+#define MAXD1 0x05ee /* Max dma count 1518 */
+#define MAXD2 0x05ee
+#define GADDR1 0x00000000 /* Clear group address */
+#define GADDR2 0x00000000
+#define GADDR3 0x00000000
+#define GADDR4 0x00000000
+#define P_PER 0x00000000 /*not used */
+#define IADDR1 0x00000000 /* Individual hash table not used */
+#define IADDR2 0x00000000
+#define IADDR3 0x00000000
+#define IADDR4 0x00000000
+#define TADDR_H 0x00000000 /* clear this regs */
+#define TADDR_M 0x00000000
+#define TADDR_L 0x00000000
+
+/* SCC Parameter Ram */
+#define RFCR 0x18 /* normal operation */
+#define TFCR 0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+ unsigned char b[6];
+ struct {
+ unsigned short high;
+ unsigned short middl;
+ unsigned short low;
+ } w;
+} ETHER_ADDR;
+
+typedef struct {
+ int max_frame_length;
+ int promisc_mode;
+ int reject_broadcast;
+ ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+ ETHER_ADDR dst_addr;
+ ETHER_ADDR src_addr;
+ unsigned short type_or_len;
+ unsigned char data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+ ETHER_ADDR dst_addr;
+ ETHER_ADDR src_addr;
+ unsigned short type_or_len;
+ unsigned char data[MAX_DATALEN];
+ unsigned char fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int scc_number,
+ alloc_routine *alloc_buffer,
+ free_routine *free_buffer,
+ store_rx_buffer_routine *store_rx_buffer,
+ handle_tx_error_routine *handle_tx_error,
+ handle_rx_error_routine *handle_rx_error,
+ handle_lost_error_routine *handle_lost_error,
+ ETHER_SPECIFIC *ether_spec);
+int ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+
--- /dev/null
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT 0x8000
+#define WRAP_SLOT 0x4000
+
+/*****************************************************************
+ Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+ /*
+ * Global Multichannel parameter RAM
+ */
+ unsigned long mcbase; /* Multichannel Base pointer */
+ unsigned short qmcstate; /* Multichannel Controller state */
+ unsigned short mrblr; /* Maximum Receive Buffer Length */
+ unsigned short tx_s_ptr; /* TSTATx Pointer */
+ unsigned short rxptr; /* Current Time slot entry in TSATRx */
+ unsigned short grfthr; /* Global Receive frame threshold */
+ unsigned short grfcnt; /* Global Receive Frame Count */
+ unsigned long intbase; /* Multichannel Base address */
+ unsigned long iintptr; /* Pointer to interrupt queue */
+ unsigned short rx_s_ptr; /* TSTARx Pointer */
+
+ unsigned short txptr; /* Current Time slot entry in TSATTx */
+ unsigned long c_mask32; /* CRC Constant (debb20e3) */
+ unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */
+ unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */
+ unsigned short c_mask16; /* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+ Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+ unsigned short tbase; /* Tx Buffer Descriptors Base Address */
+ unsigned short chamr; /* Channel Mode Register */
+ unsigned long tstate; /* Tx Internal State */
+ unsigned long txintr; /* Tx Internal Data Pointer */
+ unsigned short tbptr; /* Tx Buffer Descriptor Pointer */
+ unsigned short txcntr; /* Tx Internal Byte Count */
+ unsigned long tupack; /* (Tx Temp) */
+ unsigned long zistate; /* Zero Insertion machine state */
+ unsigned long tcrc; /* Temp Transmit CRC */
+ unsigned short intmask; /* Channel's interrupt mask flags */
+ unsigned short bdflags;
+ unsigned short rbase; /* Rx Buffer Descriptors Base Address */
+ unsigned short mflr; /* Max Frame Length Register */
+ unsigned long rstate; /* Rx Internal State */
+ unsigned long rxintr; /* Rx Internal Data Pointer */
+ unsigned short rbptr; /* Rx Buffer Descriptor Pointer */
+ unsigned short rxbyc; /* Rx Internal Byte Count */
+ unsigned long rpack; /* (Rx Temp) */
+ unsigned long zdstate; /* Zero Deletion machine state */
+ unsigned long rcrc; /* Temp Transmit CRC */
+ unsigned short maxc; /* Max_length counter */
+ unsigned short tmp_mb; /* Temp */
+};
+
+
+/*****************************************************************
+ HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * HDLC specific parameter RAM
+ */
+ unsigned char RESERVED1[4]; /* Reserved area */
+ unsigned long c_mask; /* CRC constant */
+ unsigned long c_pres; /* CRC preset */
+ unsigned short disfc; /* discarded frame counter */
+ unsigned short crcec; /* CRC error counter */
+ unsigned short abtsc; /* abort sequence counter */
+ unsigned short nmarc; /* nonmatching address rx cnt */
+ unsigned short retrc; /* frame retransmission cnt */
+ unsigned short mflr; /* maximum frame length reg */
+ unsigned short max_cnt; /* maximum length counter */
+ unsigned short rfthr; /* received frames threshold */
+ unsigned short rfcnt; /* received frames count */
+ unsigned short hmask; /* user defined frm addr mask */
+ unsigned short haddr1; /* user defined frm address 1 */
+ unsigned short haddr2; /* user defined frm address 2 */
+ unsigned short haddr3; /* user defined frm address 3 */
+ unsigned short haddr4; /* user defined frm address 4 */
+ unsigned short tmp; /* temp */
+ unsigned short tmp_mb; /* temp */
+};
+
+
+
+/*****************************************************************
+ UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID 0x8000 /* control character is valid */
+#define CC_REJ 0x4000 /* don't store char in buffer */
+#define CC_CHAR 0x00ff /* control character */
+
+/* UART */
+struct uart_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rx_temp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * UART specific parameter RAM
+ */
+ unsigned char RESERVED1[8]; /* Reserved area */
+ unsigned short max_idl; /* maximum idle characters */
+ unsigned short idlc; /* rx idle counter (internal) */
+ unsigned short brkcr; /* break count register */
+
+ unsigned short parec; /* Rx parity error counter */
+ unsigned short frmer; /* Rx framing error counter */
+ unsigned short nosec; /* Rx noise counter */
+ unsigned short brkec; /* Rx break character counter */
+ unsigned short brkln; /* Reaceive break length */
+
+ unsigned short uaddr1; /* address character 1 */
+ unsigned short uaddr2; /* address character 2 */
+ unsigned short rtemp; /* temp storage */
+ unsigned short toseq; /* Tx out of sequence char */
+ unsigned short cc[8]; /* Rx control characters */
+ unsigned short rccm; /* Rx control char mask */
+ unsigned short rccr; /* Rx control char register */
+ unsigned short rlbc; /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+ BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * BISYNC specific parameter RAM
+ */
+ unsigned char RESERVED1[4]; /* Reserved area */
+ unsigned long crcc; /* CRC Constant Temp Value */
+ unsigned short prcrc; /* Preset Receiver CRC-16/LRC */
+ unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */
+ unsigned short parec; /* Receive Parity Error Counter */
+ unsigned short bsync; /* BISYNC SYNC Character */
+ unsigned short bdle; /* BISYNC DLE Character */
+ unsigned short cc[8]; /* Rx control characters */
+ unsigned short rccm; /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+ IOM2 parameter RAM
+ (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+ unsigned short ci_data; /* ci data */
+ unsigned short monitor_data; /* monitor data */
+ unsigned short tstate; /* transmitter state */
+ unsigned short rstate; /* receiver state */
+};
+
+/*****************************************************************
+ SPI/SMC parameter RAM
+ (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R 0x8000 /* Ready bit in BD */
+
+struct spi_pram {
+ unsigned short rbase; /* Rx BD Base Address */
+ unsigned short tbase; /* Tx BD Base Address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+};
+
+struct smc_uart_pram {
+ unsigned short rbase; /* Rx BD Base Address */
+ unsigned short tbase; /* Tx BD Base Address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned short max_idl; /* Maximum IDLE Characters */
+ unsigned short idlc; /* Temporary IDLE Counter */
+ unsigned short brkln; /* Last Rx Break Length */
+ unsigned short brkec; /* Rx Break Condition Counter */
+ unsigned short brkcr; /* Break Count Register (Tx) */
+ unsigned short r_mask; /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+ unsigned short rbase; /* rx BD Base Address */
+ unsigned short tbase; /* Tx BD Base Address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned short reserved[5]; /* Reserved */
+};
+
+struct idma_pram {
+ unsigned short ibase; /* IDMA BD Base Address */
+ unsigned short ibptr; /* IDMA buffer descriptor pointer */
+ unsigned long istate; /* IDMA internal state */
+ unsigned long itemp; /* IDMA temp */
+};
+
+struct ethernet_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * ETHERNET specific parameter RAM
+ */
+ unsigned long c_pres; /* preset CRC */
+ unsigned long c_mask; /* constant mask for CRC */
+ unsigned long crcec; /* CRC error counter */
+ unsigned long alec; /* alighnment error counter */
+ unsigned long disfc; /* discard frame counter */
+ unsigned short pads; /* short frame PAD characters */
+ unsigned short ret_lim; /* retry limit threshold */
+ unsigned short ret_cnt; /* retry limit counter */
+ unsigned short mflr; /* maximum frame length reg */
+ unsigned short minflr; /* minimum frame length reg */
+ unsigned short maxd1; /* maximum DMA1 length reg */
+ unsigned short maxd2; /* maximum DMA2 length reg */
+ unsigned short maxd; /* rx max DMA */
+ unsigned short dma_cnt; /* rx dma counter */
+ unsigned short max_b; /* max bd byte count */
+ unsigned short gaddr1; /* group address filter 1 */
+ unsigned short gaddr2; /* group address filter 2 */
+ unsigned short gaddr3; /* group address filter 3 */
+ unsigned short gaddr4; /* group address filter 4 */
+ unsigned long tbuf0_data0; /* save area 0 - current frm */
+ unsigned long tbuf0_data1; /* save area 1 - current frm */
+ unsigned long tbuf0_rba0;
+ unsigned long tbuf0_crc;
+ unsigned short tbuf0_bcnt;
+ union {
+ unsigned char b[6];
+ struct {
+ unsigned short high;
+ unsigned short middl;
+ unsigned short low;
+ } w;
+ } paddr;
+ unsigned short p_per; /* persistence */
+ unsigned short rfbd_ptr; /* rx first bd pointer */
+ unsigned short tfbd_ptr; /* tx first bd pointer */
+ unsigned short tlbd_ptr; /* tx last bd pointer */
+ unsigned long tbuf1_data0; /* save area 0 - next frame */
+ unsigned long tbuf1_data1; /* save area 1 - next frame */
+ unsigned long tbuf1_rba0;
+ unsigned long tbuf1_crc;
+ unsigned short tbuf1_bcnt;
+ unsigned short tx_len; /* tx frame length counter */
+ unsigned short iaddr1; /* individual address filter 1*/
+ unsigned short iaddr2; /* individual address filter 2*/
+ unsigned short iaddr3; /* individual address filter 3*/
+ unsigned short iaddr4; /* individual address filter 4*/
+ unsigned short boff_cnt; /* back-off counter */
+ unsigned short taddr_h; /* temp address (MSB) */
+ unsigned short taddr_m; /* temp address */
+ unsigned short taddr_l; /* temp address (LSB) */
+};
+
+struct transparent_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * TRANSPARENT specific parameter RAM
+ */
+ unsigned long crc_p; /* CRC Preset */
+ unsigned long crc_c; /* CRC constant */
+};
+
+struct timer_pram {
+ /*
+ * RISC timers parameter RAM
+ */
+ unsigned short tm_base; /* RISC timer table base adr */
+ unsigned short tm_ptr; /* RISC timer table pointer */
+ unsigned short r_tmr; /* RISC timer mode register */
+ unsigned short r_tmv; /* RISC timer valid register */
+ unsigned long tm_cmd; /* RISC timer cmd register */
+ unsigned long tm_cnt; /* RISC timer internal cnt */
+};
+
+#endif
--- /dev/null
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+ volatile unsigned short status;
+ volatile unsigned short length;
+ volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+ /* BASE + 0x000: user data memory */
+ volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+ volatile unsigned char udata_bd[0x200]; /*user data Ucode */
+ volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */
+ volatile unsigned char RESERVED1[0x500]; /* Reserved area */
+};
+#else
+struct user_data {
+ /* BASE + 0x000: user data memory */
+ volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+ volatile unsigned char udata_bd1[0x200]; /* user, bds */
+ volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+ volatile unsigned char udata_bd2[0x100]; /* user, bds */
+ volatile unsigned char RESERVED1[0x400]; /* Reserved area */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+ union {
+ struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */
+ struct user_data u;
+ }ch_or_u; /* multipul or user space */
+
+ /* BASE + 0xc00: PARAMETER RAM */
+ union {
+ struct scc_pram {
+ union {
+ struct hdlc_pram h;
+ struct uart_pram u;
+ struct bisync_pram b;
+ struct transparent_pram t;
+ unsigned char RESERVED66[0x70];
+ } pscc; /* scc parameter area (protocol dependent) */
+ union {
+ struct {
+ unsigned char RESERVED70[0x10];
+ struct spi_pram spi;
+ unsigned char RESERVED72[0x8];
+ struct timer_pram timer;
+ } timer_spi;
+ struct {
+ struct idma_pram idma;
+ unsigned char RESERVED67[0x4];
+ union {
+ struct smc_uart_pram u;
+ struct smc_trnsp_pram t;
+ } psmc;
+ } idma_smc;
+ } pothers;
+ } scc;
+ struct ethernet_pram enet_scc;
+ struct global_multi_pram m;
+ unsigned char pr[0x100];
+ } pram[4];
+
+ /* reserved */
+
+ /* BASE + 0x1000: INTERNAL REGISTERS */
+ /* SIM */
+ volatile unsigned long sim_mcr; /* module configuration reg */
+ volatile unsigned short sim_simtr; /* module test register */
+ volatile unsigned char RESERVED2[0x2]; /* Reserved area */
+ volatile unsigned char sim_avr; /* auto vector reg */
+ volatile unsigned char sim_rsr; /* reset status reg */
+ volatile unsigned char RESERVED3[0x2]; /* Reserved area */
+ volatile unsigned char sim_clkocr; /* CLCO control register */
+ volatile unsigned char RESERVED62[0x3]; /* Reserved area */
+ volatile unsigned short sim_pllcr; /* PLL control register */
+ volatile unsigned char RESERVED63[0x2]; /* Reserved area */
+ volatile unsigned short sim_cdvcr; /* Clock devider control register */
+ volatile unsigned short sim_pepar; /* Port E pin assignment register */
+ volatile unsigned char RESERVED64[0xa]; /* Reserved area */
+ volatile unsigned char sim_sypcr; /* system protection control*/
+ volatile unsigned char sim_swiv; /* software interrupt vector*/
+ volatile unsigned char RESERVED6[0x2]; /* Reserved area */
+ volatile unsigned short sim_picr; /* periodic interrupt control reg */
+ volatile unsigned char RESERVED7[0x2]; /* Reserved area */
+ volatile unsigned short sim_pitr; /* periodic interrupt timing reg */
+ volatile unsigned char RESERVED8[0x3]; /* Reserved area */
+ volatile unsigned char sim_swsr; /* software service */
+ volatile unsigned long sim_bkar; /* breakpoint address register*/
+ volatile unsigned long sim_bkcr; /* breakpoint control register*/
+ volatile unsigned char RESERVED10[0x8]; /* Reserved area */
+ /* MEMC */
+ volatile unsigned long memc_gmr; /* Global memory register */
+ volatile unsigned short memc_mstat; /* MEMC status register */
+ volatile unsigned char RESERVED11[0xa]; /* Reserved area */
+ volatile unsigned long memc_br0; /* base register 0 */
+ volatile unsigned long memc_or0; /* option register 0 */
+ volatile unsigned char RESERVED12[0x8]; /* Reserved area */
+ volatile unsigned long memc_br1; /* base register 1 */
+ volatile unsigned long memc_or1; /* option register 1 */
+ volatile unsigned char RESERVED13[0x8]; /* Reserved area */
+ volatile unsigned long memc_br2; /* base register 2 */
+ volatile unsigned long memc_or2; /* option register 2 */
+ volatile unsigned char RESERVED14[0x8]; /* Reserved area */
+ volatile unsigned long memc_br3; /* base register 3 */
+ volatile unsigned long memc_or3; /* option register 3 */
+ volatile unsigned char RESERVED15[0x8]; /* Reserved area */
+ volatile unsigned long memc_br4; /* base register 3 */
+ volatile unsigned long memc_or4; /* option register 3 */
+ volatile unsigned char RESERVED16[0x8]; /* Reserved area */
+ volatile unsigned long memc_br5; /* base register 3 */
+ volatile unsigned long memc_or5; /* option register 3 */
+ volatile unsigned char RESERVED17[0x8]; /* Reserved area */
+ volatile unsigned long memc_br6; /* base register 3 */
+ volatile unsigned long memc_or6; /* option register 3 */
+ volatile unsigned char RESERVED18[0x8]; /* Reserved area */
+ volatile unsigned long memc_br7; /* base register 3 */
+ volatile unsigned long memc_or7; /* option register 3 */
+ volatile unsigned char RESERVED9[0x28]; /* Reserved area */
+ /* TEST */
+ volatile unsigned short test_tstmra; /* master shift a */
+ volatile unsigned short test_tstmrb; /* master shift b */
+ volatile unsigned short test_tstsc; /* shift count */
+ volatile unsigned short test_tstrc; /* repetition counter */
+ volatile unsigned short test_creg; /* control */
+ volatile unsigned short test_dreg; /* destributed register */
+ volatile unsigned char RESERVED58[0x404]; /* Reserved area */
+ /* IDMA1 */
+ volatile unsigned short idma_iccr; /* channel configuration reg*/
+ volatile unsigned char RESERVED19[0x2]; /* Reserved area */
+ volatile unsigned short idma1_cmr; /* dma mode reg */
+ volatile unsigned char RESERVED68[0x2]; /* Reserved area */
+ volatile unsigned long idma1_sapr; /* dma source addr ptr */
+ volatile unsigned long idma1_dapr; /* dma destination addr ptr */
+ volatile unsigned long idma1_bcr; /* dma byte count reg */
+ volatile unsigned char idma1_fcr; /* function code reg */
+ volatile unsigned char RESERVED20; /* Reserved area */
+ volatile unsigned char idma1_cmar; /* channel mask reg */
+ volatile unsigned char RESERVED21; /* Reserved area */
+ volatile unsigned char idma1_csr; /* channel status reg */
+ volatile unsigned char RESERVED22[0x3]; /* Reserved area */
+ /* SDMA */
+ volatile unsigned char sdma_sdsr; /* status reg */
+ volatile unsigned char RESERVED23; /* Reserved area */
+ volatile unsigned short sdma_sdcr; /* configuration reg */
+ volatile unsigned long sdma_sdar; /* address reg */
+ /* IDMA2 */
+ volatile unsigned char RESERVED69[0x2]; /* Reserved area */
+ volatile unsigned short idma2_cmr; /* dma mode reg */
+ volatile unsigned long idma2_sapr; /* dma source addr ptr */
+ volatile unsigned long idma2_dapr; /* dma destination addr ptr */
+ volatile unsigned long idma2_bcr; /* dma byte count reg */
+ volatile unsigned char idma2_fcr; /* function code reg */
+ volatile unsigned char RESERVED24; /* Reserved area */
+ volatile unsigned char idma2_cmar; /* channel mask reg */
+ volatile unsigned char RESERVED25; /* Reserved area */
+ volatile unsigned char idma2_csr; /* channel status reg */
+ volatile unsigned char RESERVED26[0x7]; /* Reserved area */
+ /* Interrupt Controller */
+ volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/
+ volatile unsigned long intr_cipr; /* CP interrupt pending reg */
+ volatile unsigned long intr_cimr; /* CP interrupt mask reg */
+ volatile unsigned long intr_cisr; /* CP interrupt in service reg*/
+ /* Parallel I/O */
+ volatile unsigned short pio_padir; /* port A data direction reg */
+ volatile unsigned short pio_papar; /* port A pin assignment reg */
+ volatile unsigned short pio_paodr; /* port A open drain reg */
+ volatile unsigned short pio_padat; /* port A data register */
+ volatile unsigned char RESERVED28[0x8]; /* Reserved area */
+ volatile unsigned short pio_pcdir; /* port C data direction reg*/
+ volatile unsigned short pio_pcpar; /* port C pin assignment reg*/
+ volatile unsigned short pio_pcso; /* port C special options */
+ volatile unsigned short pio_pcdat; /* port C data register */
+ volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */
+ volatile unsigned char RESERVED29[0x16]; /* Reserved area */
+ /* Timer */
+ volatile unsigned short timer_tgcr; /* timer global configuration reg */
+ volatile unsigned char RESERVED30[0xe]; /* Reserved area */
+ volatile unsigned short timer_tmr1; /* timer 1 mode reg */
+ volatile unsigned short timer_tmr2; /* timer 2 mode reg */
+ volatile unsigned short timer_trr1; /* timer 1 referance reg */
+ volatile unsigned short timer_trr2; /* timer 2 referance reg */
+ volatile unsigned short timer_tcr1; /* timer 1 capture reg */
+ volatile unsigned short timer_tcr2; /* timer 2 capture reg */
+ volatile unsigned short timer_tcn1; /* timer 1 counter reg */
+ volatile unsigned short timer_tcn2; /* timer 2 counter reg */
+ volatile unsigned short timer_tmr3; /* timer 3 mode reg */
+ volatile unsigned short timer_tmr4; /* timer 4 mode reg */
+ volatile unsigned short timer_trr3; /* timer 3 referance reg */
+ volatile unsigned short timer_trr4; /* timer 4 referance reg */
+ volatile unsigned short timer_tcr3; /* timer 3 capture reg */
+ volatile unsigned short timer_tcr4; /* timer 4 capture reg */
+ volatile unsigned short timer_tcn3; /* timer 3 counter reg */
+ volatile unsigned short timer_tcn4; /* timer 4 counter reg */
+ volatile unsigned short timer_ter1; /* timer 1 event reg */
+ volatile unsigned short timer_ter2; /* timer 2 event reg */
+ volatile unsigned short timer_ter3; /* timer 3 event reg */
+ volatile unsigned short timer_ter4; /* timer 4 event reg */
+ volatile unsigned char RESERVED34[0x8]; /* Reserved area */
+ /* CP */
+ volatile unsigned short cp_cr; /* command register */
+ volatile unsigned char RESERVED35[0x2]; /* Reserved area */
+ volatile unsigned short cp_rccr; /* main configuration reg */
+ volatile unsigned char RESERVED37; /* Reserved area */
+ volatile unsigned char cp_rmds; /* development support status reg */
+ volatile unsigned long cp_rmdr; /* development support control reg */
+ volatile unsigned short cp_rctr1; /* ram break register 1 */
+ volatile unsigned short cp_rctr2; /* ram break register 2 */
+ volatile unsigned short cp_rctr3; /* ram break register 3 */
+ volatile unsigned short cp_rctr4; /* ram break register 4 */
+ volatile unsigned char RESERVED59[0x2]; /* Reserved area */
+ volatile unsigned short cp_rter; /* RISC timers event reg */
+ volatile unsigned char RESERVED38[0x2]; /* Reserved area */
+ volatile unsigned short cp_rtmr; /* RISC timers mask reg */
+ volatile unsigned char RESERVED39[0x14]; /* Reserved area */
+ /* BRG */
+ union {
+ volatile unsigned long l;
+ struct {
+ volatile unsigned short BRGC_RESERV:14;
+ volatile unsigned short rst:1;
+ volatile unsigned short en:1;
+ volatile unsigned short extc:2;
+ volatile unsigned short atb:1;
+ volatile unsigned short cd:12;
+ volatile unsigned short div16:1;
+ } b;
+ } brgc[4]; /* BRG1-BRG4 configuration regs*/
+ /* SCC registers */
+ struct scc_regs {
+ union {
+ struct {
+ /* Low word. */
+ volatile unsigned short GSMR_RESERV2:1;
+ volatile unsigned short edge:2;
+ volatile unsigned short tci:1;
+ volatile unsigned short tsnc:2;
+ volatile unsigned short rinv:1;
+ volatile unsigned short tinv:1;
+ volatile unsigned short tpl:3;
+ volatile unsigned short tpp:2;
+ volatile unsigned short tend:1;
+ volatile unsigned short tdcr:2;
+ volatile unsigned short rdcr:2;
+ volatile unsigned short renc:3;
+ volatile unsigned short tenc:3;
+ volatile unsigned short diag:2;
+ volatile unsigned short enr:1;
+ volatile unsigned short ent:1;
+ volatile unsigned short mode:4;
+ /* High word. */
+ volatile unsigned short GSMR_RESERV1:14;
+ volatile unsigned short pri:1;
+ volatile unsigned short gde:1;
+ volatile unsigned short tcrc:2;
+ volatile unsigned short revd:1;
+ volatile unsigned short trx:1;
+ volatile unsigned short ttx:1;
+ volatile unsigned short cdp:1;
+ volatile unsigned short ctsp:1;
+ volatile unsigned short cds:1;
+ volatile unsigned short ctss:1;
+ volatile unsigned short tfl:1;
+ volatile unsigned short rfw:1;
+ volatile unsigned short txsy:1;
+ volatile unsigned short synl:2;
+ volatile unsigned short rtsm:1;
+ volatile unsigned short rsyn:1;
+ } b;
+ struct {
+ volatile unsigned long low;
+ volatile unsigned long high;
+ } w;
+ } scc_gsmr; /* SCC general mode reg */
+ volatile unsigned short scc_psmr; /* protocol specific mode reg */
+ volatile unsigned char RESERVED42[0x2]; /* Reserved area */
+ volatile unsigned short scc_todr; /* SCC transmit on demand */
+ volatile unsigned short scc_dsr; /* SCC data sync reg */
+ volatile unsigned short scc_scce; /* SCC event reg */
+ volatile unsigned char RESERVED43[0x2];/* Reserved area */
+ volatile unsigned short scc_sccm; /* SCC mask reg */
+ volatile unsigned char RESERVED44[0x1];/* Reserved area */
+ volatile unsigned char scc_sccs; /* SCC status reg */
+ volatile unsigned char RESERVED45[0x8]; /* Reserved area */
+ } scc_regs[4];
+ /* SMC */
+ struct smc_regs {
+ volatile unsigned char RESERVED46[0x2]; /* Reserved area */
+ volatile unsigned short smc_smcmr; /* SMC mode reg */
+ volatile unsigned char RESERVED60[0x2]; /* Reserved area */
+ volatile unsigned char smc_smce; /* SMC event reg */
+ volatile unsigned char RESERVED47[0x3]; /* Reserved area */
+ volatile unsigned char smc_smcm; /* SMC mask reg */
+ volatile unsigned char RESERVED48[0x5]; /* Reserved area */
+ } smc_regs[2];
+ /* SPI */
+ volatile unsigned short spi_spmode; /* SPI mode reg */
+ volatile unsigned char RESERVED51[0x4]; /* Reserved area */
+ volatile unsigned char spi_spie; /* SPI event reg */
+ volatile unsigned char RESERVED52[0x3]; /* Reserved area */
+ volatile unsigned char spi_spim; /* SPI mask reg */
+ volatile unsigned char RESERVED53[0x2]; /* Reserved area */
+ volatile unsigned char spi_spcom; /* SPI command reg */
+ volatile unsigned char RESERVED54[0x4]; /* Reserved area */
+ /* PIP */
+ volatile unsigned short pip_pipc; /* pip configuration reg */
+ volatile unsigned char RESERVED65[0x2]; /* Reserved area */
+ volatile unsigned short pip_ptpr; /* pip timing parameters reg */
+ volatile unsigned long pip_pbdir; /* port b data direction reg */
+ volatile unsigned long pip_pbpar; /* port b pin assignment reg */
+ volatile unsigned long pip_pbodr; /* port b open drain reg */
+ volatile unsigned long pip_pbdat; /* port b data reg */
+ volatile unsigned char RESERVED71[0x18]; /* Reserved area */
+ /* Serial Interface */
+ volatile unsigned long si_simode; /* SI mode register */
+ volatile unsigned char si_sigmr; /* SI global mode register */
+ volatile unsigned char RESERVED55; /* Reserved area */
+ volatile unsigned char si_sistr; /* SI status register */
+ volatile unsigned char si_sicmr; /* SI command register */
+ volatile unsigned char RESERVED56[0x4]; /* Reserved area */
+ volatile unsigned long si_sicr; /* SI clock routing */
+ volatile unsigned long si_sirp; /* SI ram pointers */
+ volatile unsigned char RESERVED57[0xc]; /* Reserved area */
+ volatile unsigned short si_siram[0x80]; /* SI routing ram */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
--- /dev/null
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit) x =bit
+
+/*****************************************************************
+ Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET 0x8000
+#define CMD_OPCODE 0x0f00
+#define CMD_CHANNEL 0x00f0
+#define CMD_FLAG 0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS 0x0000
+#define INIT_RX_PARAMS 0x0100
+#define INIT_TX_PARAMS 0x0200
+#define ENTER_HUNT_MODE 0x0300
+#define STOP_TX 0x0400
+#define GR_STOP_TX 0x0500
+#define RESTART_TX 0x0600
+#define CLOSE_RX_BD 0x0700
+#define SET_ENET_GROUP 0x0800
+#define RESET_ENET_GROUP 0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32 0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV 0x01
+#define GUN 0x02
+#define GINT 0x04
+#define IQOV 0x08
+
+
+/* Timer commands */
+#define SET_TIMER 0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID 0x8000 /* Valid interrupt entry */
+#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */
+#define INTR_MASK_BITS 0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC 0x0
+#define MODE_APPLE_TALK 0x2
+#define MODE_SS7 0x3
+#define MODE_UART 0x4
+#define MODE_PROFIBUS 0x5
+#define MODE_ASYNC_HDLC 0x6
+#define MODE_V14 0x7
+#define MODE_BISYNC 0x8
+#define MODE_DDCMP 0x9
+#define MODE_MULTI_CHANNEL 0xa
+#define MODE_ETHERNET 0xc
+
+#define DIAG_NORMAL 0x0
+#define DIAG_LOCAL_LPB 0x1
+#define DIAG_AUTO_ECHO 0x2
+#define DIAG_LBP_ECHO 0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ 0x0
+#define ENC_NRZI 0x1
+#define ENC_FM0 0x2
+#define ENC_MANCH 0x4
+#define ENC_DIFF_MANC 0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1 0x0
+#define CLOCK_RATE_8 0x1
+#define CLOCK_RATE_16 0x2
+#define CLOCK_RATE_32 0x3
+
+#define TPP_00 0x0
+#define TPP_10 0x1
+#define TPP_01 0x2
+#define TPP_11 0x3
+
+#define TPL_NO 0x0
+#define TPL_8 0x1
+#define TPL_16 0x2
+#define TPL_32 0x3
+#define TPL_48 0x4
+#define TPL_64 0x5
+#define TPL_128 0x6
+
+#define TSNC_INFINITE 0x0
+#define TSNC_14_65 0x1
+#define TSNC_4_15 0x2
+#define TSNC_3_1 0x3
+
+#define EDGE_BOTH 0x0
+#define EDGE_POS 0x1
+#define EDGE_NEG 0x2
+#define EDGE_NO 0x3
+
+#define SYNL_NO 0x0
+#define SYNL_4 0x1
+#define SYNL_8 0x2
+#define SYNL_16 0x3
+
+#define TCRC_CCITT16 0x0
+#define TCRC_CRC16 0x1
+#define TCRC_CCITT32 0x2
+
+
+/*****************************************************************
+ TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD 0x8000 /* Transmit on demand */
+
+
+/*****************************************************************
+ CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
+#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
+#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
+#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
+
+
+/*****************************************************************
+ Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */
+#define INTR_SCC1 0x40000000 /* SCC port 1 */
+#define INTR_SCC2 0x20000000 /* SCC port 2 */
+#define INTR_SCC3 0x10000000 /* SCC port 3 */
+#define INTR_SCC4 0x08000000 /* SCC port 4 */
+#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */
+#define INTR_TIMER1 0x02000000 /* timer 1 */
+#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */
+#define INTR_DMA1 0x00200000 /* idma 1 */
+#define INTR_DMA2 0x00100000 /* idma 2 */
+#define INTR_TIMER2 0x00040000 /* timer 2 */
+#define INTR_CP_TIMER 0x00020000 /* CP timer */
+#define INTR_PIP_STATUS 0x00010000 /* PIP status */
+#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */
+#define INTR_TIMER3 0x00001000 /* timer 3 */
+#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */
+#define INTR_TIMER4 0x00000080 /* timer 4 */
+#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */
+#define INTR_SCP 0x00000020 /* SCP */
+#define INTR_SMC1 0x00000010 /* SMC 1 */
+#define INTR_SMC2 0x00000008 /* SMC 2 */
+#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */
+#define INTR_ERR 0x00000001 /* error */
+
+
+/*****************************************************************
+ CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR 32
+#define CPMVEC_PIO_PC0 0x1f
+#define CPMVEC_SCC1 0x1e
+#define CPMVEC_SCC2 0x1d
+#define CPMVEC_SCC3 0x1c
+#define CPMVEC_SCC4 0x1b
+#define CPMVEC_PIO_PC1 0x1a
+#define CPMVEC_TIMER1 0x19
+#define CPMVEC_PIO_PC2 0x18
+#define CPMVEC_PIO_PC3 0x17
+#define CPMVEC_SDMA_CB_ERR 0x16
+#define CPMVEC_IDMA1 0x15
+#define CPMVEC_IDMA2 0x14
+#define CPMVEC_RESERVED3 0x13
+#define CPMVEC_TIMER2 0x12
+#define CPMVEC_RISCTIMER 0x11
+#define CPMVEC_RESERVED2 0x10
+#define CPMVEC_PIO_PC4 0x0f
+#define CPMVEC_PIO_PC5 0x0e
+#define CPMVEC_TIMER3 0x0c
+#define CPMVEC_PIO_PC6 0x0b
+#define CPMVEC_PIO_PC7 0x0a
+#define CPMVEC_PIO_PC8 0x09
+#define CPMVEC_RESERVED1 0x08
+#define CPMVEC_TIMER4 0x07
+#define CPMVEC_PIO_PC9 0x06
+#define CPMVEC_SPI 0x05
+#define CPMVEC_SMC1 0x04
+#define CPMVEC_SMC2 0x03
+#define CPMVEC_PIO_PC10 0x02
+#define CPMVEC_PIO_PC11 0x01
+#define CPMVEC_ERROR 0x00
+
+/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */
+/* #define CPMVEC_SCC1 ((ushort)0x1e) */
+/* #define CPMVEC_SCC2 ((ushort)0x1d) */
+/* #define CPMVEC_SCC3 ((ushort)0x1c) */
+/* #define CPMVEC_SCC4 ((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */
+/* #define CPMVEC_TIMER1 ((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
+/* #define CPMVEC_IDMA1 ((ushort)0x15) */
+/* #define CPMVEC_IDMA2 ((ushort)0x14) */
+/* #define CPMVEC_RESERVED3 ((ushort)0x13) */
+/* #define CPMVEC_TIMER2 ((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
+/* #define CPMVEC_RESERVED2 ((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */
+/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */
+/* #define CPMVEC_RESERVED1 ((ushort)0x08) */
+/* #define CPMVEC_TIMER4 ((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */
+/* #define CPMVEC_SPI ((ushort)0x05) */
+/* #define CPMVEC_SMC1 ((ushort)0x04) */
+/* #define CPMVEC_SMC2 ((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */
+/* #define CPMVEC_ERROR ((ushort)0x00) */
+
+
+/*****************************************************************
+ * PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ *
+ * Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1 ((ushort)0x0001)
+#define PA_TXD1 ((ushort)0x0002)
+#define PA_RXD2 ((ushort)0x0004)
+#define PA_TXD2 ((ushort)0x0008)
+#define PA_RXD3 ((ushort)0x0010)
+#define PA_TXD3 ((ushort)0x0020)
+#define PA_RXD4 ((ushort)0x0040)
+#define PA_TXD4 ((ushort)0x0080)
+
+#define PA_CLK1 ((ushort)0x0100)
+#define PA_CLK2 ((ushort)0x0200)
+#define PA_CLK3 ((ushort)0x0400)
+#define PA_CLK4 ((ushort)0x0800)
+#define PA_CLK5 ((ushort)0x1000)
+#define PA_CLK6 ((ushort)0x2000)
+#define PA_CLK7 ((ushort)0x4000)
+#define PA_CLK8 ((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1 ((ushort)0x0001)
+#define PC_RTS2 ((ushort)0x0002)
+#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1 ((ushort)0x0010)
+#define PC_CD1 ((ushort)0x0020)
+#define PC_CTS2 ((ushort)0x0040)
+#define PC_CD2 ((ushort)0x0080)
+#define PC_CTS3 ((ushort)0x0100)
+#define PC_CD3 ((ushort)0x0200)
+#define PC_CTS4 ((ushort)0x0400)
+#define PC_CD4 ((ushort)0x0800)
+
+
+
+/*****************************************************************
+ chip select option register
+*****************************************************************/
+#define DTACK 0xe000
+#define ADR_MASK 0x1ffc
+#define RDWR_MASK 0x0002
+#define FC_MASK 0x0001
+
+/*****************************************************************
+ tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) { \
+ if((bd)->status & T_W) \
+ (bd) = TBD_ADDR(quicc,pram); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_TBD(bd,quicc,pram) { \
+ if ((bd) == TBD_ADDR(quicc, pram)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+#define INCREASE_RBD(bd,quicc,pram) { \
+ if((bd)->status & R_W) \
+ (bd) = RBD_ADDR(quicc,pram); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_RBD(bd,quicc,pram) { \
+ if ((bd) == RBD_ADDR(quicc, pram)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+
+/*****************************************************************
+ Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+ (&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+ CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+ CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) { \
+ if((bd)->status & T_W) \
+ (bd) = TBD_32_ADDR(quicc,page,channel); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) { \
+ if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) { \
+ if((bd)->status & R_W) \
+ (bd) = RBD_32_ADDR(quicc,page,channel); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) { \
+ if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+
+#endif
--- /dev/null
+/*
+ * Apple Sound Chip
+ */
+
+#ifndef __ASM_MAC_ASC_H
+#define __ASM_MAC_ASC_H
+
+/*
+ * ASC offsets and controls
+ */
+
+#define ASC_BUF_BASE 0x00 /* RAM buffer offset */
+#define ASC_BUF_SIZE 0x800
+
+#define ASC_CONTROL 0x800
+#define ASC_CONTROL_OFF 0x00
+#define ASC_FREQ(chan,byte) ((0x810)+((chan)<<3)+(byte))
+#define ASC_ENABLE 0x801
+#define ASC_ENABLE_SAMPLE 0x02
+#define ASC_MODE 0x802
+#define ASC_MODE_SAMPLE 0x02
+
+#define ASC_VOLUME 0x806
+#define ASC_CHAN 0x807 /* ??? */
+
+
+#endif
--- /dev/null
+/*
+ * Definitions for the "Baboon" custom IC on the PowerBook 190.
+ */
+
+#define BABOON_BASE (0x50F1A000) /* same as IDE controller base */
+
+#ifndef __ASSEMBLY__
+
+struct baboon {
+ char pad1[208]; /* generic IDE registers, not used here */
+ short mb_control; /* Control register:
+ * bit 5 : slot 2 power control
+ * bit 6 : slot 1 power control
+ */
+ char pad2[2];
+ short mb_status; /* (0xD4) media bay status register:
+ *
+ * bit 0: ????
+ * bit 1: IDE interrupt active?
+ * bit 2: bay status, 0 = full, 1 = empty
+ * bit 3: ????
+ */
+ char pad3[2]; /* (0xD6) not used */
+ short mb_ifr; /* (0xD8) media bay interrupt flags register:
+ *
+ * bit 0: ????
+ * bit 1: IDE controller interrupt
+ * bit 2: media bay status change interrupt
+ */
+};
+
+#endif /* __ASSEMBLY **/
--- /dev/null
+/*
+ * I/O Processor (IOP) defines and structures, mostly snagged from A/UX
+ * header files.
+ *
+ * The original header from which this was taken is copyrighted. I've done some
+ * rewriting (in fact my changes make this a bit more readable, IMHO) but some
+ * more should be done.
+ */
+
+/*
+ * This is the base address of the IOPs. Use this as the address of
+ * a "struct iop" (see below) to see where the actual registers fall.
+ */
+
+#define SCC_IOP_BASE_IIFX (0x50F04000)
+#define ISM_IOP_BASE_IIFX (0x50F12000)
+
+#define SCC_IOP_BASE_QUADRA (0x50F0C000)
+#define ISM_IOP_BASE_QUADRA (0x50F1E000)
+
+/* IOP status/control register bits: */
+
+#define IOP_BYPASS 0x01 /* bypass-mode hardware access */
+#define IOP_AUTOINC 0x02 /* allow autoincrement of ramhi/lo */
+#define IOP_RUN 0x04 /* set to 0 to reset IOP chip */
+#define IOP_IRQ 0x08 /* generate IRQ to IOP if 1 */
+#define IOP_INT0 0x10 /* intr priority from IOP to host */
+#define IOP_INT1 0x20 /* intr priority from IOP to host */
+#define IOP_HWINT 0x40 /* IRQ from hardware; bypass mode only */
+#define IOP_DMAINACTIVE 0x80 /* no DMA request active; bypass mode only */
+
+#define NUM_IOPS 2
+#define NUM_IOP_CHAN 7
+#define NUM_IOP_MSGS NUM_IOP_CHAN*8
+#define IOP_MSG_LEN 32
+
+/* IOP reference numbers, used by the globally-visible iop_xxx functions */
+
+#define IOP_NUM_SCC 0
+#define IOP_NUM_ISM 1
+
+/* IOP channel states */
+
+#define IOP_MSG_IDLE 0 /* idle */
+#define IOP_MSG_NEW 1 /* new message sent */
+#define IOP_MSG_RCVD 2 /* message received; processing */
+#define IOP_MSG_COMPLETE 3 /* message processing complete */
+
+/* IOP message status codes */
+
+#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */
+#define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */
+#define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */
+#define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */
+#define IOP_MSGSTATUS_UNSOL 6 /* message is unsolicited */
+
+/* IOP memory addresses of the members of the mac_iop_kernel structure. */
+
+#define IOP_ADDR_MAX_SEND_CHAN 0x0200
+#define IOP_ADDR_SEND_STATE 0x0201
+#define IOP_ADDR_PATCH_CTRL 0x021F
+#define IOP_ADDR_SEND_MSG 0x0220
+#define IOP_ADDR_MAX_RECV_CHAN 0x0300
+#define IOP_ADDR_RECV_STATE 0x0301
+#define IOP_ADDR_ALIVE 0x031F
+#define IOP_ADDR_RECV_MSG 0x0320
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOP Control registers, staggered because in usual Apple style they were
+ * too lazy to decode the A0 bit. This structure is assumed to begin at
+ * one of the xxx_IOP_BASE addresses given above.
+ */
+
+struct mac_iop {
+ __u8 ram_addr_hi; /* shared RAM address hi byte */
+ __u8 pad0;
+ __u8 ram_addr_lo; /* shared RAM address lo byte */
+ __u8 pad1;
+ __u8 status_ctrl; /* status/control register */
+ __u8 pad2[3];
+ __u8 ram_data; /* RAM data byte at ramhi/lo */
+
+ __u8 pad3[23];
+
+ /* Bypass-mode hardware access registers */
+
+ union {
+ struct { /* SCC registers */
+ __u8 sccb_cmd; /* SCC B command reg */
+ __u8 pad4;
+ __u8 scca_cmd; /* SCC A command reg */
+ __u8 pad5;
+ __u8 sccb_data; /* SCC B data */
+ __u8 pad6;
+ __u8 scca_data; /* SCC A data */
+ } scc_regs;
+
+ struct { /* ISM registers */
+ __u8 wdata; /* write a data byte */
+ __u8 pad7;
+ __u8 wmark; /* write a mark byte */
+ __u8 pad8;
+ __u8 wcrc; /* write 2-byte crc to disk */
+ __u8 pad9;
+ __u8 wparams; /* write the param regs */
+ __u8 pad10;
+ __u8 wphase; /* write the phase states & dirs */
+ __u8 pad11;
+ __u8 wsetup; /* write the setup register */
+ __u8 pad12;
+ __u8 wzeroes; /* mode reg: 1's clr bits, 0's are x */
+ __u8 pad13;
+ __u8 wones; /* mode reg: 1's set bits, 0's are x */
+ __u8 pad14;
+ __u8 rdata; /* read a data byte */
+ __u8 pad15;
+ __u8 rmark; /* read a mark byte */
+ __u8 pad16;
+ __u8 rerror; /* read the error register */
+ __u8 pad17;
+ __u8 rparams; /* read the param regs */
+ __u8 pad18;
+ __u8 rphase; /* read the phase states & dirs */
+ __u8 pad19;
+ __u8 rsetup; /* read the setup register */
+ __u8 pad20;
+ __u8 rmode; /* read the mode register */
+ __u8 pad21;
+ __u8 rhandshake; /* read the handshake register */
+ } ism_regs;
+ } b;
+};
+
+/* This structure is used to track IOP messages in the Linux kernel */
+
+struct iop_msg {
+ struct iop_msg *next; /* next message in queue or NULL */
+ uint iop_num; /* IOP number */
+ uint channel; /* channel number */
+ void *caller_priv; /* caller private data */
+ int status; /* status of this message */
+ __u8 message[IOP_MSG_LEN]; /* the message being sent/received */
+ __u8 reply[IOP_MSG_LEN]; /* the reply to the message */
+ void (*handler)(struct iop_msg *);
+ /* function to call when reply recvd */
+};
+
+extern int iop_scc_present,iop_ism_present;
+
+extern int iop_listen(uint, uint,
+ void (*handler)(struct iop_msg *),
+ const char *);
+extern int iop_send_message(uint, uint, void *, uint, __u8 *,
+ void (*)(struct iop_msg *));
+extern void iop_complete_message(struct iop_msg *);
+extern void iop_upload_code(uint, __u8 *, uint, __u16);
+extern void iop_download_code(uint, __u8 *, uint, __u16);
+extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
+
+#endif /* __ASSEMBLY__ */
--- /dev/null
+#ifndef _ASM_MAC_MOUSE_H
+#define _ASM_MAC_MOUSE_H
+
+/*
+ * linux/include/asm-m68k/mac_mouse.h
+ * header file for Macintosh ADB mouse driver
+ * 27-10-97 Michael Schmitz
+ * copied from:
+ * header file for Atari Mouse driver
+ * by Robert de Vries (robert@and.nl) on 19Jul93
+ */
+
+struct mouse_status {
+ char buttons;
+ short dx;
+ short dy;
+ int ready;
+ int active;
+ wait_queue_head_t wait;
+ struct fasync_struct *fasyncptr;
+};
+
+#endif
--- /dev/null
+/*
+ * OSS
+ *
+ * This is used in place of VIA2 on the IIfx.
+ */
+
+#define OSS_BASE (0x50f1a000)
+
+/*
+ * Interrupt level offsets for mac_oss->irq_level
+ */
+
+#define OSS_NUBUS0 0
+#define OSS_NUBUS1 1
+#define OSS_NUBUS2 2
+#define OSS_NUBUS3 3
+#define OSS_NUBUS4 4
+#define OSS_NUBUS5 5
+#define OSS_IOPISM 6
+#define OSS_IOPSCC 7
+#define OSS_SOUND 8
+#define OSS_SCSI 9
+#define OSS_60HZ 10
+#define OSS_VIA1 11
+#define OSS_UNUSED1 12
+#define OSS_UNUSED2 13
+#define OSS_PARITY 14
+#define OSS_UNUSED3 15
+
+#define OSS_NUM_SOURCES 16
+
+/*
+ * Pending interrupt bits in mac_oss->irq_pending
+ */
+
+#define OSS_IP_NUBUS0 0x0001
+#define OSS_IP_NUBUS1 0x0002
+#define OSS_IP_NUBUS2 0x0004
+#define OSS_IP_NUBUS3 0x0008
+#define OSS_IP_NUBUS4 0x0010
+#define OSS_IP_NUBUS5 0x0020
+#define OSS_IP_IOPISM 0x0040
+#define OSS_IP_IOPSCC 0x0080
+#define OSS_IP_SOUND 0x0100
+#define OSS_IP_SCSI 0x0200
+#define OSS_IP_60HZ 0x0400
+#define OSS_IP_VIA1 0x0800
+#define OSS_IP_UNUSED1 0x1000
+#define OSS_IP_UNUSED2 0x2000
+#define OSS_IP_PARITY 0x4000
+#define OSS_IP_UNUSED3 0x8000
+
+#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5)
+
+/*
+ * Rom Control Register
+ */
+
+#define OSS_POWEROFF 0x80
+
+/*
+ * OSS Interrupt levels for various sub-systems
+ *
+ * This mapping is layed out with two things in mind: first, we try to keep
+ * things on their own levels to avoid having to do double-dispatches. Second,
+ * the levels match as closely as possible the alternate IRQ mapping mode (aka
+ * "A/UX mode") available on some VIA machines.
+ */
+
+#define OSS_IRQLEV_DISABLED 0
+#define OSS_IRQLEV_IOPISM 1 /* ADB? */
+#define OSS_IRQLEV_SCSI IRQ_AUTO_2
+#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */
+#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */
+#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */
+#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */
+#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */
+#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */
+
+#ifndef __ASSEMBLY__
+
+struct mac_oss {
+ __u8 irq_level[0x10]; /* [0x000-0x00f] Interrupt levels */
+ __u8 padding0[0x1F2]; /* [0x010-0x201] IO space filler */
+ __u16 irq_pending; /* [0x202-0x203] pending interrupts bits */
+ __u8 rom_ctrl; /* [0x204-0x204] ROM cntl reg (for poweroff) */
+ __u8 padding1[0x2]; /* [0x205-0x206] currently unused by A/UX */
+ __u8 ack_60hz; /* [0x207-0x207] 60 Hz ack. */
+};
+
+extern volatile struct mac_oss *oss;
+extern int oss_present;
+
+#endif /* __ASSEMBLY__ */
--- /dev/null
+/*
+ * Apple Peripheral System Controller (PSC)
+ *
+ * The PSC is used on the AV Macs to control IO functions not handled
+ * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
+ * channels.
+ *
+ * The first seven DMA channels appear to be "one-shot" and are actually
+ * sets of two channels; one member is active while the other is being
+ * configured, and then you flip the active member and start all over again.
+ * The one-shot channels are grouped together and are:
+ *
+ * 1. SCSI
+ * 2. Ethernet Read
+ * 3. Ethernet Write
+ * 4. Floppy Disk Controller
+ * 5. SCC Channel A Receive
+ * 6. SCC Channel B Receive
+ * 7. SCC Channel A Transmit
+ *
+ * The remaining two channels are handled somewhat differently. They appear
+ * to be closely tied and share one set of registers. They also seem to run
+ * continuously, although how you keep the buffer filled in this scenario is
+ * not understood as there seems to be only one input and one output buffer
+ * pointer.
+ *
+ * Much of this was extrapolated from what was known about the Ethernet
+ * registers and subsequently confirmed using MacsBug (ie by pinging the
+ * machine with easy-to-find patterns and looking for them in the DMA
+ * buffers, or by sending a file over the serial ports and finding the
+ * file in the buffers.)
+ *
+ * 1999-05-25 (jmt)
+ */
+
+#define PSC_BASE (0x50F31000)
+
+/*
+ * The IER/IFR registers work like the VIA, except that it has 4
+ * of them each on different interrupt levels, and each register
+ * set only seems to handle four interrupts instead of seven.
+ *
+ * To access a particular set of registers, add 0xn0 to the base
+ * where n = 3,4,5 or 6.
+ */
+
+#define pIFRbase 0x100
+#define pIERbase 0x104
+
+/*
+ * One-shot DMA control registers
+ */
+
+#define PSC_MYSTERY 0x804
+
+#define PSC_CTL_BASE 0xC00
+
+#define PSC_SCSI_CTL 0xC00
+#define PSC_ENETRD_CTL 0xC10
+#define PSC_ENETWR_CTL 0xC20
+#define PSC_FDC_CTL 0xC30
+#define PSC_SCCA_CTL 0xC40
+#define PSC_SCCB_CTL 0xC50
+#define PSC_SCCATX_CTL 0xC60
+
+/*
+ * DMA channels. Add +0x10 for the second channel in the set.
+ * You're supposed to use one channel while the other runs and
+ * then flip channels and do the whole thing again.
+ */
+
+#define PSC_ADDR_BASE 0x1000
+#define PSC_LEN_BASE 0x1004
+#define PSC_CMD_BASE 0x1008
+
+#define PSC_SET0 0x00
+#define PSC_SET1 0x10
+
+#define PSC_SCSI_ADDR 0x1000 /* confirmed */
+#define PSC_SCSI_LEN 0x1004 /* confirmed */
+#define PSC_SCSI_CMD 0x1008 /* confirmed */
+#define PSC_ENETRD_ADDR 0x1020 /* confirmed */
+#define PSC_ENETRD_LEN 0x1024 /* confirmed */
+#define PSC_ENETRD_CMD 0x1028 /* confirmed */
+#define PSC_ENETWR_ADDR 0x1040 /* confirmed */
+#define PSC_ENETWR_LEN 0x1044 /* confirmed */
+#define PSC_ENETWR_CMD 0x1048 /* confirmed */
+#define PSC_FDC_ADDR 0x1060 /* strongly suspected */
+#define PSC_FDC_LEN 0x1064 /* strongly suspected */
+#define PSC_FDC_CMD 0x1068 /* strongly suspected */
+#define PSC_SCCA_ADDR 0x1080 /* confirmed */
+#define PSC_SCCA_LEN 0x1084 /* confirmed */
+#define PSC_SCCA_CMD 0x1088 /* confirmed */
+#define PSC_SCCB_ADDR 0x10A0 /* confirmed */
+#define PSC_SCCB_LEN 0x10A4 /* confirmed */
+#define PSC_SCCB_CMD 0x10A8 /* confirmed */
+#define PSC_SCCATX_ADDR 0x10C0 /* confirmed */
+#define PSC_SCCATX_LEN 0x10C4 /* confirmed */
+#define PSC_SCCATX_CMD 0x10C8 /* confirmed */
+
+/*
+ * Free-running DMA registers. The only part known for sure are the bits in
+ * the control register, the buffer addresses and the buffer length. Everything
+ * else is anybody's guess.
+ *
+ * These registers seem to be mirrored every thirty-two bytes up until offset
+ * 0x300. It's safe to assume then that a new set of registers starts there.
+ */
+
+#define PSC_SND_CTL 0x200 /*
+ * [ 16-bit ]
+ * Sound (Singer?) control register.
+ *
+ * bit 0 : ????
+ * bit 1 : ????
+ * bit 2 : Set to one to enable sound
+ * output. Possibly a mute flag.
+ * bit 3 : ????
+ * bit 4 : ????
+ * bit 5 : ????
+ * bit 6 : Set to one to enable pass-thru
+ * audio. In this mode the audio data
+ * seems to appear in both the input
+ * buffer and the output buffer.
+ * bit 7 : Set to one to activate the
+ * sound input DMA or zero to
+ * disable it.
+ * bit 8 : Set to one to activate the
+ * sound output DMA or zero to
+ * disable it.
+ * bit 9 : \
+ * bit 11 : |
+ * These two bits control the sample
+ * rate. Usually set to binary 10 and
+ * MacOS 8.0 says I'm at 48 KHz. Using
+ * a binary value of 01 makes things
+ * sound about 1/2 speed (24 KHz?) and
+ * binary 00 is slower still (22 KHz?)
+ *
+ * Setting this to 0x0000 is a good way to
+ * kill all DMA at boot time so that the
+ * PSC won't overwrite the kernel image
+ * with sound data.
+ */
+
+/*
+ * 0x0202 - 0x0203 is unused. Writing there
+ * seems to clobber the control register.
+ */
+
+#define PSC_SND_SOURCE 0x204 /*
+ * [ 32-bit ]
+ * Controls input source and volume:
+ *
+ * bits 12-15 : input source volume, 0 - F
+ * bits 16-19 : unknown, always 0x5
+ * bits 20-23 : input source selection:
+ * 0x3 = CD Audio
+ * 0x4 = External Audio
+ *
+ * The volume is definitely not the general
+ * output volume as it doesn't affect the
+ * alert sound volume.
+ */
+#define PSC_SND_STATUS1 0x208 /*
+ * [ 32-bit ]
+ * Appears to be a read-only status register.
+ * The usual value is 0x00400002.
+ */
+#define PSC_SND_HUH3 0x20C /*
+ * [ 16-bit ]
+ * Unknown 16-bit value, always 0x0000.
+ */
+#define PSC_SND_BITS2GO 0x20E /*
+ * [ 16-bit ]
+ * Counts down to zero from some constant
+ * value. The value appears to be the
+ * number of _bits_ remaining before the
+ * buffer is full, which would make sense
+ * since Apple's docs say the sound DMA
+ * channels are 1 bit wide.
+ */
+#define PSC_SND_INADDR 0x210 /*
+ * [ 32-bit ]
+ * Address of the sound input DMA buffer
+ */
+#define PSC_SND_OUTADDR 0x214 /*
+ * [ 32-bit ]
+ * Address of the sound output DMA buffer
+ */
+#define PSC_SND_LEN 0x218 /*
+ * [ 16-bit ]
+ * Length of both buffers in eight-byte units.
+ */
+#define PSC_SND_HUH4 0x21A /*
+ * [ 16-bit ]
+ * Unknown, always 0x0000.
+ */
+#define PSC_SND_STATUS2 0x21C /*
+ * [ 16-bit ]
+ * Appears to e a read-only status register.
+ * The usual value is 0x0200.
+ */
+#define PSC_SND_HUH5 0x21E /*
+ * [ 16-bit ]
+ * Unknown, always 0x0000.
+ */
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *psc;
+extern int psc_present;
+
+/*
+ * Access functions
+ */
+
+static inline void psc_write_byte(int offset, __u8 data)
+{
+ *((volatile __u8 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_word(int offset, __u16 data)
+{
+ *((volatile __u16 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_long(int offset, __u32 data)
+{
+ *((volatile __u32 *)(psc + offset)) = data;
+}
+
+static inline u8 psc_read_byte(int offset)
+{
+ return *((volatile __u8 *)(psc + offset));
+}
+
+static inline u16 psc_read_word(int offset)
+{
+ return *((volatile __u16 *)(psc + offset));
+}
+
+static inline u32 psc_read_long(int offset)
+{
+ return *((volatile __u32 *)(psc + offset));
+}
+
+#endif /* __ASSEMBLY__ */
--- /dev/null
+/*
+ * 6522 Versatile Interface Adapter (VIA)
+ *
+ * There are two of these on the Mac II. Some IRQ's are vectored
+ * via them as are assorted bits and bobs - eg rtc, adb. The picture
+ * is a bit incomplete as the Mac documentation doesn't cover this well
+ */
+
+#ifndef _ASM_MAC_VIA_H_
+#define _ASM_MAC_VIA_H_
+
+/*
+ * Base addresses for the VIAs. There are two in every machine,
+ * although on some machines the second is an RBV or an OSS.
+ * The OSS is different enough that it's handled separately.
+ *
+ * Do not use these values directly; use the via1 and via2 variables
+ * instead (and don't forget to check rbv_present when using via2!)
+ */
+
+#define VIA1_BASE (0x50F00000)
+#define VIA2_BASE (0x50F02000)
+#define RBV_BASE (0x50F26000)
+
+/*
+ * Not all of these are true post MacII I think.
+ * CSA: probably the ones CHRP marks as 'unused' change purposes
+ * when the IWM becomes the SWIM.
+ * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
+ * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
+ *
+ * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
+ * following changes for IIfx:
+ * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
+ * Also, "All of the functionality of VIA2 has been moved to other chips".
+ */
+
+#define VIA1A_vSccWrReq 0x80 /* SCC write. (input)
+ * [CHRP] SCC WREQ: Reflects the state of the
+ * Wait/Request pins from the SCC.
+ * [Macintosh Family Hardware]
+ * as CHRP on SE/30,II,IIx,IIcx,IIci.
+ * on IIfx, "0 means an active request"
+ */
+#define VIA1A_vRev8 0x40 /* Revision 8 board ???
+ * [CHRP] En WaitReqB: Lets the WaitReq_L
+ * signal from port B of the SCC appear on
+ * the PA7 input pin. Output.
+ * [Macintosh Family] On the SE/30, this
+ * is the bit to flip screen buffers.
+ * 0=alternate, 1=main.
+ * on II,IIx,IIcx,IIci,IIfx this is a bit
+ * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
+ */
+#define VIA1A_vHeadSel 0x20 /* Head select for IWM.
+ * [CHRP] unused.
+ * [Macintosh Family] "Floppy disk
+ * state-control line SEL" on all but IIfx
+ */
+#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx
+ * this bit enables the "Overlay" address
+ * map in the address decoders as it is on
+ * reset for mapping the ROM over the reset
+ * vector. 1=use overlay map.
+ * On the IIci,IIfx it is another bit of the
+ * CPU ID: 0=normal IIci, 1=IIci with parity
+ * feature or IIfx.
+ * [CHRP] En WaitReqA: Lets the WaitReq_L
+ * signal from port A of the SCC appear
+ * on the PA7 input pin (CHRP). Output.
+ * [MkLinux] "Drive Select"
+ * (with 0x20 being 'disk head select')
+ */
+#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select:
+ * 1: select the external serial clock to
+ * drive the SCC's /RTxCA pin.
+ * 0: Select the 3.6864MHz clock to drive
+ * the SCC cell.
+ * [Macintosh Family] Correct on all but IIfx
+ */
+
+/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
+ * on Macs which had the PWM sound hardware. Reserved on newer models.
+ * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
+ * bit 2: 1=IIci, 0=IIfx
+ * bit 1: 1 on both IIci and IIfx.
+ * MkLinux sez bit 0 is 'burnin flag' in this case.
+ * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
+ * inputs, these bits will read 0.
+ */
+#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
+#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
+
+/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
+ * CHRP offers no info. */
+#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with
+ * PWM hardware) 0=enabled.
+ * Also, on IIci w/parity, shows parity error
+ * 0=error, 1=OK. */
+#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled
+ * On SE/30, vertical sync interrupt enable.
+ * 0=enabled. This vSync interrupt shows up
+ * as a slot $E interrupt. */
+#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
+#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
+#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
+#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
+#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
+#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
+
+/* MkLinux defines the following "VIA1 Register B contents where they
+ * differ from standard VIA1". From the naming scheme, we assume they
+ * correspond to a VIA work-alike named 'EVR'. */
+#define EVRB_XCVR 0x08 /* XCVR_SESSION* */
+#define EVRB_FULL 0x10 /* VIA_FULL */
+#define EVRB_SYSES 0x20 /* SYS_SESSION */
+#define EVRB_AUXIE 0x00 /* Enable A/UX Interrupt Scheme */
+#define EVRB_AUXID 0x40 /* Disable A/UX Interrupt Scheme */
+#define EVRB_SFTWRIE 0x00 /* Software Interrupt ReQuest */
+#define EVRB_SFTWRID 0x80 /* Software Interrupt ReQuest */
+
+/*
+ * VIA2 A register is the interrupt lines raised off the nubus
+ * slots.
+ * The below info is from 'Macintosh Family Hardware.'
+ * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
+ * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
+ * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
+ * Perhaps OSS uses vRAM1 and vRAM2 for ADB.
+ */
+
+#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
+#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
+#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
+#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
+#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
+#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
+#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
+#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
+
+/* RAM size bits decoded as follows:
+ * bit1 bit0 size of ICs in bank A
+ * 0 0 256 kbit
+ * 0 1 1 Mbit
+ * 1 0 4 Mbit
+ * 1 1 16 Mbit
+ */
+
+/*
+ * Register B has the fun stuff in it
+ */
+
+#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by
+ * timer T1.
+ * on IIci, parity test: 0=test mode.
+ * [MkLinux] RBV_PARODD: 1=odd,0=even. */
+#define VIA2B_vSndJck 0x40 /* External sound jack status.
+ * 0=plug is inserted. On SE/30, always 0 */
+#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
+#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
+#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush
+ * on II, AMU/PMMU control.
+ * if AMU, 0=24bit to 32bit translation
+ * if PMMU, 1=PMMU is accessing page table.
+ * on SE/30 tied low.
+ * on IIx,IIcx,IIfx, unused.
+ * on IIci/RBV, cache control. 0=flush cache.
+ */
+#define VIA2B_vPower 0x04 /* Power off, 0=shut off power.
+ * on SE/30 this signal sent to PDS card. */
+#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked.
+ * on SE/30 sent to PDS card. */
+#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card
+ * on others, 0=disable processor's instruction
+ * and data caches. */
+
+/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
+ * Another example of a valid function that has no ROM support is the use
+ * of the alternate video page for page-flipping animation. Since there
+ * is no ROM call to flip pages, it is necessary to go play with the
+ * right bit in the VIA chip (6522 Versatile Interface Adapter).
+ * [CSA: don't know which one this is, but it's one of 'em!]
+ */
+
+/*
+ * 6522 registers - see databook.
+ * CSA: Assignments for VIA1 confirmed from CHRP spec.
+ */
+
+/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
+/* Note: 15 VIA regs, 8 RBV regs */
+
+#define vBufB 0x0000 /* [VIA/RBV] Register B */
+#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
+#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
+#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
+#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
+#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
+#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
+#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
+#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
+#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
+#define vSR 0x1400 /* [VIA only] Shift register. */
+#define vACR 0x1600 /* [VIA only] Auxilary control register. */
+#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
+ /* CHRP sez never ever to *write* this.
+ * Mac family says never to *change* this.
+ * In fact we need to initialize it once at start. */
+#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
+#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
+#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
+
+/* The RBV only decodes the bottom eight address lines; the VIA doesn't
+ * decode the bottom eight -- so vBufB | rBufB will always get you BufB */
+/* CSA: in fact, only bits 0,1, and 4 seem to be decoded.
+ * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem
+ * to matter. In fact *all* of the top 8 bits seem to matter;
+ * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either.
+ * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999]
+ */
+
+#define rBufB 0x0000 /* [VIA/RBV] Register B */
+#define rExp 0x0001 /* [RBV only] RBV future expansion (always 0) */
+#define rSIFR 0x0002 /* [RBV only] RBV slot interrupts register. */
+#define rIFR 0x1a03 /* [VIA/RBV] RBV interrupt flag register. */
+#define rMonP 0x0010 /* [RBV only] RBV video monitor type. */
+#define rChpT 0x0011 /* [RBV only] RBV test mode register (reads as 0). */
+#define rSIER 0x0012 /* [RBV only] RBV slot interrupt enables. */
+#define rIER 0x1c13 /* [VIA/RBV] RBV interrupt flag enable register. */
+#define rBufA rSIFR /* the 'slot interrupts register' is BufA on a VIA */
+
+/*
+ * Video monitor parameters, for rMonP:
+ */
+#define RBV_DEPTH 0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */
+#define RBV_MONID 0x38 /* monitor type, as below. */
+#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */
+/* Supported monitor types: */
+#define MON_15BW (1<<3) /* 15" BW portrait. */
+#define MON_IIGS (2<<3) /* 12" color (modified IIGS monitor). */
+#define MON_15RGB (5<<3) /* 15" RGB portrait. */
+#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */
+#define MON_NONE (7<<3) /* No monitor attached. */
+
+/* To clarify IER manipulations */
+#define IER_SET_BIT(b) (0x80 | (1<<(b)) )
+#define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *via1,*via2;
+extern int rbv_present,via_alt_mapping;
+
+static inline int rbv_set_video_bpp(int bpp)
+{
+ char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
+ if (!rbv_present || val<0) return -1;
+ via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
+ return 0;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MAC_VIA_H_ */
--- /dev/null
+#ifdef __uClinux__
+#include "machdep_no.h"
+#else
+#include "machdep_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_MACHDEP_H
+#define _M68K_MACHDEP_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+struct pt_regs;
+struct mktime;
+struct rtc_time;
+struct rtc_pll_info;
+struct buffer_head;
+
+extern void (*mach_sched_init) (irq_handler_t handler);
+/* machine dependent irq functions */
+extern void (*mach_init_IRQ) (void);
+extern void (*mach_get_model) (char *model);
+extern void (*mach_get_hardware_list) (struct seq_file *m);
+/* machine dependent timer functions */
+extern unsigned long (*mach_gettimeoffset)(void);
+extern int (*mach_hwclk)(int, struct rtc_time*);
+extern unsigned int (*mach_get_ss)(void);
+extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_clock_mmss)(unsigned long);
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
+extern void (*mach_hd_setup)(char *, int *);
+extern long mach_max_dma_address;
+extern void (*mach_heartbeat) (int);
+extern void (*mach_l2_flush) (int);
+extern void (*mach_beep) (unsigned int, unsigned int);
+
+#endif /* _M68K_MACHDEP_H */
--- /dev/null
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern void hw_timer_init(void);
+extern unsigned long hw_timer_offset(void);
+
+extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
+
+/* Machine dependent time handling */
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+ int *min, int *sec);
+extern int (*mach_set_clock_mmss)(unsigned long);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+
+extern void config_BSP(char *command, int len);
+
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _M68KNOMMU_MACHDEP_H */
--- /dev/null
+/*
+ * machines.h: Defines for taking apart the machine type value in the
+ * idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+ char *name;
+ unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+// reduced along with table in arch/m68k/sun3/idprom.c
+// sun3 port doesn't need to know about sparc machines.
+//#define NUM_SUN_MACHINES 23
+#define NUM_SUN_MACHINES 8
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ * 7 4 3 0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK 0xf0
+#define SM_SUN3 0x10
+#define SM_SUN4 0x20
+#define SM_SUN3X 0x40
+#define SM_SUN4C 0x50
+#define SM_SUN4M 0x70
+#define SM_SUN4M_OBP 0x80
+
+#define SM_TYP_MASK 0x0f
+/* Sun3 machines */
+#define SM_3_160 0x01 /* Sun 3/160 series */
+#define SM_3_50 0x02 /* Sun 3/50 series */
+#define SM_3_260 0x03 /* Sun 3/260 series */
+#define SM_3_110 0x04 /* Sun 3/110 series */
+#define SM_3_60 0x07 /* Sun 3/60 series */
+#define SM_3_E 0x08 /* Sun 3/E series */
+
+/* Sun3x machines */
+#define SM_3_460 0x01 /* Sun 3/460 (460,470,480) series */
+#define SM_3_80 0x02 /* Sun 3/80 series */
+
+/* Sun4 machines */
+#define SM_4_260 0x01 /* Sun 4/200 series */
+#define SM_4_110 0x02 /* Sun 4/100 series */
+#define SM_4_330 0x03 /* Sun 4/300 series */
+#define SM_4_470 0x04 /* Sun 4/400 series */
+
+/* Sun4c machines Full Name - PROM NAME */
+#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */
+#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */
+#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */
+#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */
+#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */
+#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */
+#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */
+
+/* Sun4m machines, these predate the OpenBoot. These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */
+#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */
+#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
--- /dev/null
+/*
+** linux/machw.h -- This header defines some macros and pointers for
+** the various Macintosh custom hardware registers.
+**
+** Copyright 1997 by Michael Schmitz
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _ASM_MACHW_H_
+#define _ASM_MACHW_H_
+
+/*
+ * head.S maps the videomem to VIDEOMEMBASE
+ */
+
+#define VIDEOMEMBASE 0xf0000000
+#define VIDEOMEMSIZE (4096*1024)
+#define VIDEOMEMMASK (-4096*1024)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#if 0
+/*
+** SCC Z8530
+*/
+
+#define MAC_SCC_BAS (0x50F04000)
+struct MAC_SCC
+ {
+ u_char cha_a_ctrl;
+ u_char char_dummy1;
+ u_char cha_a_data;
+ u_char char_dummy2;
+ u_char cha_b_ctrl;
+ u_char char_dummy3;
+ u_char cha_b_data;
+ };
+# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* linux/machw.h */
--- /dev/null
+#ifndef __ASM_MACINTOSH_H
+#define __ASM_MACINTOSH_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+/*
+ * Apple Macintoshisms
+ */
+
+extern void mac_reset(void);
+extern void mac_poweroff(void);
+extern void mac_init_IRQ(void);
+extern int mac_irq_pending(unsigned int);
+
+/*
+ * Floppy driver magic hook - probably shouldnt be here
+ */
+
+extern void via1_set_head(int);
+
+/*
+ * Macintosh Table
+ */
+
+struct mac_model
+{
+ short ident;
+ char *name;
+ char adb_type;
+ char via_type;
+ char scsi_type;
+ char ide_type;
+ char scc_type;
+ char ether_type;
+ char nubus_type;
+};
+
+#define MAC_ADB_NONE 0
+#define MAC_ADB_II 1
+#define MAC_ADB_IISI 2
+#define MAC_ADB_CUDA 3
+#define MAC_ADB_PB1 4
+#define MAC_ADB_PB2 5
+#define MAC_ADB_IOP 6
+
+#define MAC_VIA_II 1
+#define MAC_VIA_IIci 2
+#define MAC_VIA_QUADRA 3
+
+#define MAC_SCSI_NONE 0
+#define MAC_SCSI_OLD 1
+#define MAC_SCSI_QUADRA 2
+#define MAC_SCSI_QUADRA2 3
+#define MAC_SCSI_QUADRA3 4
+
+#define MAC_IDE_NONE 0
+#define MAC_IDE_QUADRA 1
+#define MAC_IDE_PB 2
+#define MAC_IDE_BABOON 3
+
+#define MAC_SCC_II 1
+#define MAC_SCC_IOP 2
+#define MAC_SCC_QUADRA 3
+#define MAC_SCC_PSC 4
+
+#define MAC_ETHER_NONE 0
+#define MAC_ETHER_SONIC 1
+#define MAC_ETHER_MACE 2
+
+#define MAC_NO_NUBUS 0
+#define MAC_NUBUS 1
+
+/*
+ * Gestalt numbers
+ */
+
+#define MAC_MODEL_II 6
+#define MAC_MODEL_IIX 7
+#define MAC_MODEL_IICX 8
+#define MAC_MODEL_SE30 9
+#define MAC_MODEL_IICI 11
+#define MAC_MODEL_IIFX 13 /* And well numbered it is too */
+#define MAC_MODEL_IISI 18
+#define MAC_MODEL_LC 19
+#define MAC_MODEL_Q900 20
+#define MAC_MODEL_PB170 21
+#define MAC_MODEL_Q700 22
+#define MAC_MODEL_CLII 23 /* aka: P200 */
+#define MAC_MODEL_PB140 25
+#define MAC_MODEL_Q950 26 /* aka: WGS95 */
+#define MAC_MODEL_LCIII 27 /* aka: P450 */
+#define MAC_MODEL_PB210 29
+#define MAC_MODEL_C650 30
+#define MAC_MODEL_PB230 32
+#define MAC_MODEL_PB180 33
+#define MAC_MODEL_PB160 34
+#define MAC_MODEL_Q800 35 /* aka: WGS80 */
+#define MAC_MODEL_Q650 36
+#define MAC_MODEL_LCII 37 /* aka: P400/405/410/430 */
+#define MAC_MODEL_PB250 38
+#define MAC_MODEL_IIVI 44
+#define MAC_MODEL_P600 45 /* aka: P600CD */
+#define MAC_MODEL_IIVX 48
+#define MAC_MODEL_CCL 49 /* aka: P250 */
+#define MAC_MODEL_PB165C 50
+#define MAC_MODEL_C610 52 /* aka: WGS60 */
+#define MAC_MODEL_Q610 53
+#define MAC_MODEL_PB145 54 /* aka: PB145B */
+#define MAC_MODEL_P520 56 /* aka: LC520 */
+#define MAC_MODEL_C660 60
+#define MAC_MODEL_P460 62 /* aka: LCIII+, P466/P467 */
+#define MAC_MODEL_PB180C 71
+#define MAC_MODEL_PB520 72 /* aka: PB520C, PB540, PB540C, PB550C */
+#define MAC_MODEL_PB270C 77
+#define MAC_MODEL_Q840 78
+#define MAC_MODEL_P550 80 /* aka: LC550, P560 */
+#define MAC_MODEL_CCLII 83 /* aka: P275 */
+#define MAC_MODEL_PB165 84
+#define MAC_MODEL_PB190 85 /* aka: PB190CS */
+#define MAC_MODEL_TV 88
+#define MAC_MODEL_P475 89 /* aka: LC475, P476 */
+#define MAC_MODEL_P475F 90 /* aka: P475 w/ FPU (no LC040) */
+#define MAC_MODEL_P575 92 /* aka: LC575, P577/P578 */
+#define MAC_MODEL_Q605 94
+#define MAC_MODEL_Q605_ACC 95 /* Q605 accelerated to 33 MHz */
+#define MAC_MODEL_Q630 98 /* aka: LC630, P630/631/635/636/637/638/640 */
+#define MAC_MODEL_P588 99 /* aka: LC580, P580 */
+#define MAC_MODEL_PB280 102
+#define MAC_MODEL_PB280C 103
+#define MAC_MODEL_PB150 115
+
+extern struct mac_model *macintosh_config;
+
+#endif
--- /dev/null
+/*
+** macints.h -- Macintosh Linux interrupt handling structs and prototypes
+**
+** Copyright 1997 by Michael Schmitz
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _ASM_MACINTS_H_
+#define _ASM_MACINTS_H_
+
+#include <asm/irq.h>
+
+/* Setting this prints debugging info for unclaimed interrupts */
+
+#define DEBUG_SPURIOUS
+
+/* Setting this prints debugging info on each autovector interrupt */
+
+/* #define DEBUG_IRQS */
+
+/* Setting this prints debugging info on each Nubus interrupt */
+
+/* #define DEBUG_NUBUS_INT */
+
+/* Setting this prints debugging info on irqs as they enabled and disabled. */
+
+/* #define DEBUG_IRQUSE */
+
+/*
+ * Base IRQ number for all Mac68K interrupt sources. Each source
+ * has eight indexes (base -> base+7).
+ */
+
+#define VIA1_SOURCE_BASE 8
+#define VIA2_SOURCE_BASE 16
+#define MAC_SCC_SOURCE_BASE 24
+#define PSC3_SOURCE_BASE 24
+#define PSC4_SOURCE_BASE 32
+#define PSC5_SOURCE_BASE 40
+#define PSC6_SOURCE_BASE 48
+#define NUBUS_SOURCE_BASE 56
+#define BABOON_SOURCE_BASE 64
+
+/*
+ * Maximum IRQ number is BABOON_SOURCE_BASE + 7,
+ * giving us IRQs up through 71
+ */
+
+#define NUM_MAC_SOURCES 72
+
+/*
+ * clean way to separate IRQ into its source and index
+ */
+
+#define IRQ_SRC(irq) (irq >> 3)
+#define IRQ_IDX(irq) (irq & 7)
+
+/* VIA1 interrupts */
+#define IRQ_VIA1_0 (8) /* one second int. */
+#define IRQ_VIA1_1 (9) /* VBlank int. */
+#define IRQ_MAC_VBL IRQ_VIA1_1
+#define IRQ_VIA1_2 (10) /* ADB SR shifts complete */
+#define IRQ_MAC_ADB IRQ_VIA1_2
+#define IRQ_MAC_ADB_SR IRQ_VIA1_2
+#define IRQ_VIA1_3 (11) /* ADB SR CB2 ?? */
+#define IRQ_MAC_ADB_SD IRQ_VIA1_3
+#define IRQ_VIA1_4 (12) /* ADB SR ext. clock pulse */
+#define IRQ_MAC_ADB_CL IRQ_VIA1_4
+#define IRQ_VIA1_5 (13)
+#define IRQ_MAC_TIMER_2 IRQ_VIA1_5
+#define IRQ_VIA1_6 (14)
+#define IRQ_MAC_TIMER_1 IRQ_VIA1_6
+#define IRQ_VIA1_7 (15)
+
+/* VIA2/RBV interrupts */
+#define IRQ_VIA2_0 (16)
+#define IRQ_MAC_SCSIDRQ IRQ_VIA2_0
+#define IRQ_VIA2_1 (17)
+#define IRQ_MAC_NUBUS IRQ_VIA2_1
+#define IRQ_VIA2_2 (18)
+#define IRQ_VIA2_3 (19)
+#define IRQ_MAC_SCSI IRQ_VIA2_3
+#define IRQ_VIA2_4 (20)
+#define IRQ_VIA2_5 (21)
+#define IRQ_VIA2_6 (22)
+#define IRQ_VIA2_7 (23)
+
+/* Level 3 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC3_0 (24)
+#define IRQ_MAC_MACE IRQ_PSC3_0
+#define IRQ_PSC3_1 (25)
+#define IRQ_PSC3_2 (26)
+#define IRQ_PSC3_3 (27)
+
+/* Level 4 (SCC) interrupts */
+#define IRQ_SCC (32)
+#define IRQ_SCCA (33)
+#define IRQ_SCCB (34)
+#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */
+/* SCC interrupts */
+#define IRQ_SCCB_TX (32)
+#define IRQ_SCCB_STAT (33)
+#define IRQ_SCCB_RX (34)
+#define IRQ_SCCB_SPCOND (35)
+#define IRQ_SCCA_TX (36)
+#define IRQ_SCCA_STAT (37)
+#define IRQ_SCCA_RX (38)
+#define IRQ_SCCA_SPCOND (39)
+#endif
+
+/* Level 4 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC4_0 (32)
+#define IRQ_PSC4_1 (33)
+#define IRQ_PSC4_2 (34)
+#define IRQ_PSC4_3 (35)
+#define IRQ_MAC_MACE_DMA IRQ_PSC4_3
+
+/* Level 5 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC5_0 (40)
+#define IRQ_PSC5_1 (41)
+#define IRQ_PSC5_2 (42)
+#define IRQ_PSC5_3 (43)
+
+/* Level 6 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC6_0 (48)
+#define IRQ_PSC6_1 (49)
+#define IRQ_PSC6_2 (50)
+#define IRQ_PSC6_3 (51)
+
+/* Nubus interrupts (cascaded to VIA2) */
+#define IRQ_NUBUS_9 (56)
+#define IRQ_NUBUS_A (57)
+#define IRQ_NUBUS_B (58)
+#define IRQ_NUBUS_C (59)
+#define IRQ_NUBUS_D (60)
+#define IRQ_NUBUS_E (61)
+#define IRQ_NUBUS_F (62)
+
+/* Baboon interrupts (cascaded to nubus slot $C) */
+#define IRQ_BABOON_0 (64)
+#define IRQ_BABOON_1 (65)
+#define IRQ_BABOON_2 (66)
+#define IRQ_BABOON_3 (67)
+
+#define SLOT2IRQ(x) (x + 47)
+#define IRQ2SLOT(x) (x - 47)
+
+#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */
+#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */
+
+#endif /* asm/macints.h */
--- /dev/null
+#ifndef _ASM_M68K_SETUP_H
+#define _ASM_M68K_SETUP_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX 3
+#define FPSR_AEXC_DZ 4
+#define FPSR_AEXC_UNFL 5
+#define FPSR_AEXC_OVFL 6
+#define FPSR_AEXC_IOP 7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1 8
+#define FPSR_EXC_INEX2 9
+#define FPSR_EXC_DZ 10
+#define FPSR_EXC_UNFL 11
+#define FPSR_EXC_OVFL 12
+#define FPSR_EXC_OPERR 13
+#define FPSR_EXC_SNAN 14
+#define FPSR_EXC_BSUN 15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN 24
+#define FPSR_CC_INF 25
+#define FPSR_CC_Z 26
+#define FPSR_CC_NEG 27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define FPCR_ROUND_RN 0 /* round to nearest/even */
+#define FPCR_ROUND_RZ 1 /* round to zero */
+#define FPCR_ROUND_RM 2 /* minus infinity */
+#define FPCR_ROUND_RP 3 /* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X 0 /* long double */
+#define FPCR_PRECISION_S 1 /* double */
+#define FPCR_PRECISION_D 2 /* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE 0
+#define PEXECUTE 1
+#define PCONV 2
+#define PNORM 3
+#define PREGISTER 4
+#define PINSTR 5
+#define PUNIMPL 6
+#define PMOVEM 7
+
+#define PMDECODE (1<<PDECODE)
+#define PMEXECUTE (1<<PEXECUTE)
+#define PMCONV (1<<PCONV)
+#define PMNORM (1<<PNORM)
+#define PMREGISTER (1<<PREGISTER)
+#define PMINSTR (1<<PINSTR)
+#define PMUNIMPL (1<<PUNIMPL)
+#define PMMOVEM (1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+ unsigned long long m64;
+ unsigned long m32[2];
+};
+
+union fp_mant128 {
+ unsigned long long m64[2];
+ unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+ unsigned char lowmant;
+ unsigned char sign;
+ unsigned short exp;
+ union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+ below and the size in <asm/fpu.h>, too */
+struct fp_data {
+ struct fp_ext fpreg[8];
+ unsigned int fpcr;
+ unsigned int fpsr;
+ unsigned int fpiar;
+ unsigned short prec;
+ unsigned short rnd;
+ struct fp_ext temp[2];
+};
+
+#ifdef FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({ \
+ if (fp_debugprint & (1 << (bit))) \
+ printk(fmt, ## args); \
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({ \
+ static int __count = 3; \
+ \
+ if (__count > 0) { \
+ printk("You just hit an unimplemented " \
+ "fpu instruction (%s)\n", str); \
+ printk("Please report this to ....\n"); \
+ __count--; \
+ } \
+})
+
+#define FPDATA ((struct fp_data *)current->thread.fp)
+
+#else /* __ASSEMBLY__ */
+
+#define FPDATA %a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND (TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO (PT_D0)
+#define FPS_D1 (PT_D1)
+#define FPS_D2 (PT_D2)
+#define FPS_A0 (PT_A0)
+#define FPS_A1 (PT_A1)
+#define FPS_A2 (PT_A2)
+#define FPS_SR (PT_SR)
+#define FPS_PC (PT_PC)
+#define FPS_EA (PT_PC+6)
+#define FPS_PC2 (PT_PC+10)
+
+.macro fp_get_fp_reg
+ lea (FPD_FPREG,FPDATA,%d0.w*4),%a0
+ lea (%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro fp_get_pc dest
+ move.l (FPS_PC+4,%sp),\dest
+.endm
+
+.macro fp_put_pc src,jump=0
+ move.l \src,(FPS_PC+4,%sp)
+.endm
+
+.macro fp_get_instr_data f,s,dest,label
+ getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+ addq.l #\s,%sp@(FPS_PC+4)
+.endm
+
+.macro fp_get_instr_word dest,label,addr
+ fp_get_instr_data w,2,\dest,\label,\addr
+.endm
+
+.macro fp_get_instr_long dest,label,addr
+ fp_get_instr_data l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro getuser size,src,dest,label,addr
+| printf ,"[\size<%08x]",1,\addr
+.Lu1\@: moves\size \src,\dest
+
+ .section .fixup,"ax"
+ .even
+.Lu2\@: move.l \addr,%a0
+ jra \label
+ .previous
+
+ .section __ex_table,"a"
+ .align 4
+ .long .Lu1\@,.Lu2\@
+ .previous
+.endm
+
+.macro putuser size,src,dest,label,addr
+| printf ,"[\size>%08x]",1,\addr
+.Lu1\@: moves\size \src,\dest
+.Lu2\@:
+
+ .section .fixup,"ax"
+ .even
+.Lu3\@: move.l \addr,%a0
+ jra \label
+ .previous
+
+ .section __ex_table,"a"
+ .align 4
+ .long .Lu1\@,.Lu3\@
+ .long .Lu2\@,.Lu3\@
+ .previous
+.endm
+
+/* work around binutils idiocy */
+old_gas=-1
+.irp gas_ident.x .x
+old_gas=old_gas+1
+.endr
+.if !old_gas
+.irp m b,w,l
+.macro getuser.\m src,dest,label,addr
+ getuser .\m,\src,\dest,\label,\addr
+.endm
+.macro putuser.\m src,dest,label,addr
+ putuser .\m,\src,\dest,\label,\addr
+.endm
+.endr
+.endif
+
+.macro movestack nr,arg1,arg2,arg3,arg4,arg5
+ .if \nr
+ movestack (\nr-1),\arg2,\arg3,\arg4,\arg5
+ move.l \arg1,-(%sp)
+ .endif
+.endm
+
+.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+ .data
+.Lpdata\@:
+ .string "\string"
+ .previous
+
+ movem.l %d0/%d1/%a0/%a1,-(%sp)
+ .if \bit+1
+#if 0
+ moveq #\bit,%d0
+ andw #7,%d0
+ btst %d0,fp_debugprint+((31-\bit)/8)
+#else
+ btst #\bit,fp_debugprint+((31-\bit)/8)
+#endif
+ jeq .Lpskip\@
+ .endif
+ movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5
+ pea .Lpdata\@
+ jsr printk
+ lea ((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+ movem.l (%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro printx bit,fp
+#ifdef FPU_EMU_DEBUG
+ movem.l %d0/%a0,-(%sp)
+ lea \fp,%a0
+#if 0
+ moveq #'+',%d0
+ tst.w (%a0)
+ jeq .Lx1\@
+ moveq #'-',%d0
+.Lx1\@: printf \bit," %c",1,%d0
+ move.l (4,%a0),%d0
+ bclr #31,%d0
+ jne .Lx2\@
+ printf \bit,"0."
+ jra .Lx3\@
+.Lx2\@: printf \bit,"1."
+.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8)
+ move.w (2,%a0),%d0
+ ext.l %d0
+ printf \bit,"E%04x",1,%d0
+#else
+ printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+ movem.l (%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro debug instr,args
+#ifdef FPU_EMU_DEBUG
+ \instr \args
+#endif
+.endm
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_M68K_SETUP_H */
--- /dev/null
+#ifdef __uClinux__
+#include "mc146818rtc_no.h"
+#else
+#include "mc146818rtc_mm.h"
+#endif
--- /dev/null
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+
+#ifdef CONFIG_ATARI
+/* RTC in Atari machines */
+
+#include <asm/atarihw.h>
+
+#define RTC_PORT(x) (TT_RTC_BAS + 2*(x))
+#define RTC_ALWAYS_BCD 0
+
+#define CMOS_READ(addr) ({ \
+atari_outb_p((addr),RTC_PORT(0)); \
+atari_inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+atari_outb_p((addr),RTC_PORT(0)); \
+atari_outb_p((val),RTC_PORT(1)); \
+})
+#endif /* CONFIG_ATARI */
+
+#endif /* _ASM_MC146818RTC_H */
--- /dev/null
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfcache.h -- ColdFire CPU cache support code
+ *
+ * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef __M68KNOMMU_MCFCACHE_H
+#define __M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+
+/*
+ * The different ColdFire families have different cache arrangments.
+ * Everything from a small instruction only cache, to configurable
+ * data and/or instruction cache, to unified instruction/data, to
+ * harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ * Simple version 2 core cache. These have instruction cache only,
+ * we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+ movel #0x01000000,%d0 /* invalidate cache cmd */
+ movec %d0,%CACR /* do invalidate cache */
+ movel #0x80000100,%d0 /* setup cache mask */
+ movec %d0,%CACR /* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+/*
+ * New version 2 cores have a configurable split cache arrangement.
+ * For now I am just enabling instruction cache - but ultimately I
+ * think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+ movel #0x01400000,%d0
+ movec %d0,%CACR /* invalidate cache */
+ nop
+ movel #0x0000c000,%d0 /* set SDRAM cached only */
+ movec %d0,%ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ movel #0x80400100,%d0 /* configure cache */
+ movec %d0,%CACR /* enable cache */
+ nop
+.endm
+#endif /* CONFIG_M523x || CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+.macro CACHE_ENABLE
+ nop
+ movel #0x01000000, %d0
+ movec %d0, %CACR /* Invalidate cache */
+ nop
+ movel #0x0000c020, %d0 /* Set SDRAM cached only */
+ movec %d0, %ACR0
+ movel #0x00000000, %d0 /* No other regions cached */
+ movec %d0, %ACR1
+ movel #0x80000200, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ * The version 3 core cache. Oddly enough the version 2 core 5249
+ * has the same SDRAM and cache setup as the version 3 cores.
+ * This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+ movel #0x01000000,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+ movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
+#else
+ movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
+#endif
+ movec %d0,%ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ movel #0xa0000200,%d0 /* enable cache */
+ movec %d0,%CACR
+ nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M532x)
+.macro CACHE_ENABLE
+ movel #0x01000000,%d0 /* invalidate cache cmd */
+ movec %d0,%CACR /* do invalidate cache */
+ nop
+ movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
+ movec %d0,%ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ movel #0x80000200,%d0 /* setup cache mask */
+ movec %d0,%CACR /* enable cache */
+ nop
+.endm
+#endif /* CONFIG_M532x */
+
+#if defined(CONFIG_M5407)
+/*
+ * Version 4 cores have a true harvard style separate instruction
+ * and data cache. Invalidate and enable cache, also enable write
+ * buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+ movel #0x01040100,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+ movel #0x000fc000,%d0 /* set SDRAM cached only */
+ movec %d0, %ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0, %ACR1
+ movel #0x000fc000,%d0 /* set SDRAM cached only */
+ movec %d0, %ACR2
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0, %ACR3
+ movel #0xb6088400,%d0 /* enable caches */
+ movec %d0,%CACR
+ nop
+.endm
+#endif /* CONFIG_M5407 */
+
+#if defined(CONFIG_M520x)
+.macro CACHE_ENABLE
+ move.l #0x01000000,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+ move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
+ movec %d0,%ACR0
+ move.l #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ move.l #0x80400000,%d0 /* enable 8K instruction cache */
+ movec %d0,%CACR
+ nop
+.endm
+#endif /* CONFIG_M520x */
+
+/****************************************************************************/
+#endif /* __M68KNOMMU_MCFCACHE_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef mcfdma_h
+#define mcfdma_h
+/****************************************************************************/
+
+
+/*
+ * Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */
+#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */
+#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */
+#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */
+#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */
+#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */
+#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */
+#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ * Define the DMA register set addresses.
+ * Note: these are longword registers, use unsigned long as data type
+ */
+#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */
+#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */
+#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */
+#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */
+
+/*
+ * Bit definitions for the DMA Control Register (DCR).
+ */
+#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */
+#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */
+#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */
+#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */
+#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */
+#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */
+#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */
+#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */
+#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */
+#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */
+#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */
+#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */
+#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */
+#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */
+#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */
+#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */
+#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */
+#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */
+#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */
+#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */
+#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */
+#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */
+#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */
+#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */
+#define MCFDMA_DCR_START 0x0001 /* Start transfer */
+
+/*
+ * Bit definitions for the DMA Status Register (DSR).
+ */
+#define MCFDMA_DSR_CE 0x40 /* Config error */
+#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */
+#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */
+#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */
+#define MCFDMA_DSR_BSY 0x02 /* Busy */
+#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */
+#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */
+#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */
+#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */
+#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */
+
+/****************************************************************************/
+#endif /* mcfdma_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+
+
+#define MCFMBUS_BASE 0x280
+#define MCFMBUS_IRQ_VECTOR 0x19
+#define MCFMBUS_IRQ 0x1
+#define MCFMBUS_CLK 0x3f
+#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
+#define MCFMBUS_ADDRESS 0x01
+
+
+/*
+* Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR 0x00
+#define MCFMBUS_MFDR 0x04
+#define MCFMBUS_MBCR 0x08
+#define MCFMBUS_MBSR 0x0C
+#define MCFMBUS_MBDR 0x10
+
+
+#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
+
+/*
+* Define bit flags in Control Register
+*/
+
+#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
+#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
+#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
+#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
+
+/*
+* Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
+#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
+#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
+#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
+#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
+#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
+#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
+
+/*
+* Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK 1
+#define MBUSIOCGCLOCK 2
+#define MBUSIOCSADDR 3
+#define MBUSIOCGADDR 4
+#define MBUSIOCSSLADDR 5
+#define MBUSIOCGSLADDR 6
+#define MBUSIOCSSUBADDR 7
+#define MBUSIOCGSUBADDR 8
+
+#endif
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ * (C) Copyright 2001, SnapGear (www.snapgear.com)
+ *
+ * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
+ *
+ * Hacked support for m5206e Cadre III evaluation board
+ * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef mcfne_h
+#define mcfne_h
+/****************************************************************************/
+
+
+/*
+ * Support for NE2000 clones devices in ColdFire based boards.
+ * Not all boards address these parts the same way, some use a
+ * direct addressing method, others use a side-band address space
+ * to access odd address registers, some require byte swapping
+ * others do not.
+ */
+#define BSWAP(w) (((w) << 8) | ((w) >> 8))
+#define RSWAP(w) (w)
+
+
+/*
+ * Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_ARN5206)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0xf0
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 4
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206eC3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1c
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 4
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR 0x30000300
+#define NE2000_IRQ_VECTOR 25
+#define NE2000_IRQ_PRIORITY 1
+#define NE2000_IRQ_LEVEL 3
+#define NE2000_BYTE volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307C3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR 0x30600300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR 67
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0 0x30600300
+#define NE2000_ADDR1 0x30800300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR0 27
+#define NE2000_IRQ_VECTOR1 29
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR 0x30600300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR 27
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_ARN5307)
+#define NE2000_ADDR 0xfe600300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 3
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407C3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ * Side-band address space for odd address requires re-mapping
+ * many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define outb ne2000_outb
+#define inb ne2000_inb
+#define outb_p ne2000_outb
+#define inb_p ne2000_inb
+#define outsb ne2000_outsb
+#define outsw ne2000_outsw
+#define insb ne2000_insb
+#define insw ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ * This macro converts a conventional register address into the
+ * real memory pointer of the mapped NE2000 device.
+ * On most NE2000 implementations on ColdFire boards the chip is
+ * mapped in kinda funny, due to its ISA heritage.
+ */
+#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define NE2000_DATA_PTR(addr) (addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+ NE2000_BYTE *rp;
+
+ rp = (NE2000_BYTE *) NE2000_PTR(addr);
+ *rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+ NE2000_BYTE *rp, val;
+
+ rp = (NE2000_BYTE *) NE2000_PTR(addr);
+ val = *rp;
+ return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+ NE2000_BYTE *rp, val;
+ unsigned char *buf;
+
+ buf = (unsigned char *) vbuf;
+ rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *rp;
+ *buf++ = RSWAP(val);
+ }
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short w, *buf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *rp;
+ *buf++ = BSWAP(w);
+ }
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ NE2000_BYTE *rp, val;
+ unsigned char *buf;
+
+ buf = (unsigned char *) vbuf;
+ rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *buf++;
+ *rp = RSWAP(val);
+ }
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short w, *buf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *buf++;
+ *rp = BSWAP(w);
+ }
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ * Lastly the interrupt set up code...
+ * Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_ARN5206)
+void ne2000_irqsetup(int irq)
+{
+ volatile unsigned char *icrp;
+
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+ *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206eC3)
+void ne2000_irqsetup(int irq)
+{
+ volatile unsigned char *icrp;
+
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+ *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+ mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+ volatile unsigned long *icrp;
+ volatile unsigned long *pitr;
+
+ /* The NE2000 device uses external IRQ3 */
+ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+ *icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+ pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+ *pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+ volatile unsigned long *icrp;
+
+ /* The NE2000 device uses external IRQ3 */
+ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+ *icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+ mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif /* mcfne_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfpci_h
+#define mcfpci_h
+/****************************************************************************/
+
+
+#ifdef CONFIG_PCI
+
+/*
+ * Address regions in the PCI address space are not mapped into the
+ * normal memory space of the ColdFire. They must be accessed via
+ * handler routines. This is easy for I/O space (inb/outb/etc) but
+ * needs some code changes to support ordinary memory. Interrupts
+ * also need to be vectored through the PCI handler first, then it
+ * will call the actual driver sub-handlers.
+ */
+
+/*
+ * Un-define all the standard I/O access routines.
+ */
+#undef inb
+#undef inw
+#undef inl
+#undef inb_p
+#undef inw_p
+#undef insb
+#undef insw
+#undef insl
+#undef outb
+#undef outw
+#undef outl
+#undef outb_p
+#undef outw_p
+#undef outsb
+#undef outsw
+#undef outsl
+
+#undef request_irq
+#undef free_irq
+
+#undef bus_to_virt
+#undef virt_to_bus
+
+
+/*
+ * Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define inb pci_inb
+#define inw pci_inw
+#define inl pci_inl
+#define inb_p pci_inb
+#define inw_p pci_inw
+#define insb pci_insb
+#define insw pci_insw
+#define insl pci_insl
+
+#define outb pci_outb
+#define outw pci_outw
+#define outl pci_outl
+#define outb_p pci_outb
+#define outw_p pci_outw
+#define outsb pci_outsb
+#define outsw pci_outsw
+#define outsl pci_outsl
+
+#define request_irq pci_request_irq
+#define free_irq pci_free_irq
+
+#define virt_to_bus pci_virt_to_bus
+#define bus_to_virt pci_bus_to_virt
+
+#define CONFIG_COMEMPCI 1
+
+
+/*
+ * Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char pci_inb(unsigned int addr);
+unsigned short pci_inw(unsigned int addr);
+unsigned int pci_inl(unsigned int addr);
+void pci_insb(void *addr, void *buf, int len);
+void pci_insw(void *addr, void *buf, int len);
+void pci_insl(void *addr, void *buf, int len);
+
+void pci_outb(unsigned char val, unsigned int addr);
+void pci_outw(unsigned short val, unsigned int addr);
+void pci_outl(unsigned int val, unsigned int addr);
+void pci_outsb(void *addr, void *buf, int len);
+void pci_outsw(void *addr, void *buf, int len);
+void pci_outsl(void *addr, void *buf, int len);
+
+int pci_request_irq(unsigned int irq,
+ void (*handler)(int, void *, struct pt_regs *),
+ unsigned long flags,
+ const char *device,
+ void *dev_id);
+void pci_free_irq(unsigned int irq, void *dev_id);
+
+void *pci_bmalloc(int size);
+void pci_bmfree(void *bmp, int len);
+void pci_copytoshmem(unsigned long bmp, void *src, int size);
+void pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long pci_virt_to_bus(volatile void *address);
+void *pci_bus_to_virt(unsigned long address);
+void pci_bmcpyto(void *dst, void *src, int len);
+void pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif /* mcfpci_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfpit_h
+#define mcfpit_h
+/****************************************************************************/
+
+
+/*
+ * Get address specific defines for the 5270/5271, 5280/5282, and 5208.
+ */
+#if defined(CONFIG_M520x)
+#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */
+#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */
+#else
+#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */
+#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */
+#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */
+#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */
+#endif
+
+/*
+ * Define the PIT timer register set addresses.
+ */
+#define MCFPIT_PCSR 0x0 /* PIT control register */
+#define MCFPIT_PMR 0x2 /* PIT modulus register */
+#define MCFPIT_PCNTR 0x4 /* PIT count register */
+
+/*
+ * Bit definitions for the PIT Control and Status register.
+ */
+#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
+#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
+#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
+#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
+#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
+#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
+#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
+#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */
+#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */
+#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */
+#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */
+#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */
+#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */
+#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */
+#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */
+#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */
+#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */
+#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */
+#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */
+
+/****************************************************************************/
+#endif /* mcfpit_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfsim.h -- ColdFire System Integration Module support.
+ *
+ * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfsim_h
+#define mcfsim_h
+/****************************************************************************/
+
+
+/*
+ * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
+ * 5307 or 5407 specific addresses.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M520x)
+#include <asm/m520xsim.h>
+#elif defined(CONFIG_M523x)
+#include <asm/m523xsim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M532x)
+#include <asm/m532xsim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ * Define the base address of the SIM within the MBAR address space.
+ */
+#define MCFSIM_BASE 0x0 /* Base address of SIM */
+
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
+#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
+#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
+#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
+#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
+#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
+#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
+#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
+#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
+
+#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
+#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
+#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
+#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
+
+/*
+ * Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
+#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
+#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
+#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
+#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
+#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
+#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
+
+#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
+#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
+#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
+#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
+#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
+#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
+#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
+#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
+#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
+#endif
+
+/*
+ * Mask for all of the SIM devices. Some parts have more or less
+ * SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
+#endif
+
+
+/*
+ * PIT interrupt settings, if not found in mXXXXsim.h file.
+ */
+#ifndef ICR_INTRCONF
+#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
+#endif
+#ifndef MCFPIT_IMR
+#define MCFPIT_IMR MCFINTC_IMRH
+#endif
+#ifndef MCFPIT_IMR_IBIT
+#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ * Definition for the interrupt auto-vectoring support.
+ */
+extern void mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif /* mcfsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfsmc_h
+#define mcfsmc_h
+/****************************************************************************/
+
+/*
+ * None of the current ColdFire targets that use the SMC91x111
+ * allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+
+#undef outb
+#undef inb
+#undef outw
+#undef outwd
+#undef inw
+#undef outl
+#undef inl
+
+#undef outsb
+#undef outsw
+#undef outsl
+#undef insb
+#undef insw
+#undef insl
+
+/*
+ * Re-defines for ColdFire environment... The SMC part is
+ * mapped into memory space, so remap the PC-style in/out
+ * routines to handle that.
+ */
+#define outb smc_outb
+#define inb smc_inb
+#define outw smc_outw
+#define outwd smc_outwd
+#define inw smc_inw
+#define outl smc_outl
+#define inl smc_inl
+
+#define outsb smc_outsb
+#define outsw smc_outsw
+#define outsl smc_outsl
+#define insb smc_insb
+#define insw smc_insw
+#define insl smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+ register unsigned short w;
+ w = *((volatile unsigned short *) (addr & ~0x1));
+ return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+ *((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+ register unsigned short w;
+ w = *((volatile unsigned short *) addr);
+ return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+ *((volatile unsigned long *) addr) =
+ ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+ ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+ *((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ * The rep* functions are used to feed the data port with
+ * raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short *buf, *ebuf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) addr;
+
+ /* Copy as words for as long as possible */
+ for (ebuf = buf + (len >> 1); (buf < ebuf); )
+ *buf++ = *rp;
+
+ /* Lastly, handle left over byte */
+ if (len & 0x1)
+ *((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short *buf, *ebuf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned long *rp;
+ unsigned long *buf, *ebuf;
+
+ buf = (unsigned long *) vbuf;
+ rp = (volatile unsigned long *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short *buf, *ebuf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned long *rp;
+ unsigned long *buf, *ebuf;
+
+ buf = (unsigned long *) vbuf;
+ rp = (volatile unsigned long *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing enything else.
+ *
+ * We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+ static int once = 0;
+ extern unsigned short ppdata;
+ if (once++ == 0) {
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+ ppdata |= 0x0080;
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+ outw(0x0001, ioaddr + BANK_SELECT);
+ outw(0x0001, ioaddr + BANK_SELECT);
+ outw(0x0067, ioaddr + BASE);
+
+ ppdata &= ~0x0080;
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+ }
+
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif /* mcfsmc_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcftimer_h
+#define mcftimer_h
+/****************************************************************************/
+
+
+/*
+ * Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
+#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
+#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
+#elif defined(CONFIG_M532x)
+#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */
+#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */
+#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */
+#endif
+
+
+/*
+ * Define the TIMER register set addresses.
+ */
+#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
+#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */
+#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */
+#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */
+#if defined(CONFIG_M532x)
+#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */
+#else
+#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
+#endif
+
+/*
+ * Bit definitions for the Timer Mode Register (TMR).
+ * Register bit flags are common accross ColdFires.
+ */
+#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
+#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
+#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
+#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
+#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
+#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
+#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
+#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
+#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
+#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
+#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
+#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
+#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
+#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
+#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
+#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
+#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
+
+/*
+ * Bit definitions for the Timer Event Registers (TER).
+ */
+#define MCFTIMER_TER_CAP 0x01 /* Capture event */
+#define MCFTIMER_TER_REF 0x02 /* Refernece event */
+
+/****************************************************************************/
+#endif /* mcftimer_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfuart.h -- ColdFire internal UART support defines.
+ *
+ * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfuart_h
+#define mcfuart_h
+/****************************************************************************/
+
+/*
+ * Define the base address of the UARTS within the MBAR address
+ * space.
+ */
+#if defined(CONFIG_M5272)
+#define MCFUART_BASE1 0x100 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define MCFUART_BASE1 0x180 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x140 /* Base address of UART1 */
+#define MCFUART_BASE2 0x180 /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M520x)
+#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
+#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
+#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
+#elif defined(CONFIG_M532x)
+#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
+#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
+#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
+#endif
+
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+struct mcf_platform_uart {
+ unsigned long mapbase; /* Physical address base */
+ void __iomem *membase; /* Virtual address if mapped */
+ unsigned int irq; /* Interrupt vector */
+ unsigned int uartclk; /* UART clock rate */
+};
+
+/*
+ * Define the ColdFire UART register set addresses.
+ */
+#define MCFUART_UMR 0x00 /* Mode register (r/w) */
+#define MCFUART_USR 0x04 /* Status register (r) */
+#define MCFUART_UCSR 0x04 /* Clock Select (w) */
+#define MCFUART_UCR 0x08 /* Command register (w) */
+#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
+#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
+#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
+#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
+#define MCFUART_UISR 0x14 /* Interrupt Status (r) */
+#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
+#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
+#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
+#ifdef CONFIG_M5272
+#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
+#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
+#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
+#else
+#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
+#endif
+#define MCFUART_UIPR 0x34 /* Input Port (r) */
+#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
+#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
+
+
+/*
+ * Define bit flags in Mode Register 1 (MR1).
+ */
+#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
+#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
+#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
+#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
+#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
+
+#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
+#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
+#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
+#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
+#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
+
+#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
+#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
+#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
+#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
+
+/*
+ * Define bit flags in Mode Register 2 (MR2).
+ */
+#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
+#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
+#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
+#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
+#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
+
+#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
+#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
+#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
+
+/*
+ * Define bit flags in Status Register (USR).
+ */
+#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
+#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
+#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
+#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
+#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
+#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
+#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
+#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
+
+#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ * Define bit flags in Clock Select Register (UCSR).
+ */
+#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
+#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
+#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
+
+#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
+#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
+#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
+
+/*
+ * Define bit flags in Command Register (UCR).
+ */
+#define MCFUART_UCR_CMDNULL 0x00 /* No command */
+#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */
+#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */
+#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */
+#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */
+#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */
+#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
+#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
+
+#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
+#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
+#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
+#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
+#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
+#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
+
+/*
+ * Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
+#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
+
+/*
+ * Define bit flags in Input Port Register (UIP).
+ */
+#define MCFUART_UIPR_CTS 0x01 /* CTS value */
+
+/*
+ * Define bit flags in Output Port Registers (UOP).
+ * Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
+
+/*
+ * Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define MCFUART_UACR_IEC 0x01 /* Input enable control */
+
+/*
+ * Define bit flags in Interrupt Status Register (UISR).
+ * These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
+#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
+#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
+#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
+
+#ifdef CONFIG_M5272
+/*
+ * Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */
+#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */
+#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */
+
+/*
+ * Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define MCFUART_URF_RXB 0x1f /* Receiver data level */
+#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */
+#define MCFUART_URF_RXS 0xc0 /* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif /* mcfuart_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfdebug.h -- ColdFire Debug Module support.
+ *
+ * (C) Copyright 2001, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR 0x0 /* Configuration status */
+#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */
+#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */
+#define MCFDEBUG_TDR 0x7 /* Trigger definition */
+#define MCFDEBUG_PBR 0x8 /* PC breakpoint */
+#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */
+#define MCFDEBUG_ABHR 0xc /* High address breakpoint */
+#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */
+#define MCFDEBUG_DBR 0xe /* Data breakpoint */
+#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */
+#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */
+#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */
+#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */
+#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */
+#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */
+#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */
+#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */
+#define MCFDEBUG_TDR_EDLW2 0x10000000
+#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */
+#define MCFDEBUG_TDR_EDWL2 0x08000000
+#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */
+#define MCFDEBUG_TDR_EDWU2 0x04000000
+#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */
+#define MCFDEBUG_TDR_EDLL2 0x02000000
+#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */
+#define MCFDEBUG_TDR_EDLM2 0x01000000
+#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */
+#define MCFDEBUG_TDR_EDUM2 0x00800000
+#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */
+#define MCFDEBUG_TDR_EDUU2 0x00400000
+#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */
+#define MCFDEBUG_TDR_DI2 0x00200000
+#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */
+#define MCFDEBUG_TDR_EAI2 0x00100000
+#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */
+#define MCFDEBUG_TDR_EAR2 0x00080000
+#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */
+#define MCFDEBUG_TDR_EAL2 0x00040000
+#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */
+#define MCFDEBUG_TDR_EPC2 0x00020000
+#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */
+#define MCFDEBUG_TDR_PCI2 0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET 0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET 0x00100000
+#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */
+#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */
+#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */
+#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */
+#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */
+#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */
+#define MCFDEBUG_CSR_DDC_WRITE 0x00001000
+#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */
+#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */
+#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */
+#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */
+#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */
+#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */
+#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET 0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified. The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+static inline void wdebug(int reg, unsigned long data) {
+ unsigned short dbg_spc[6];
+ unsigned short *dbg;
+
+ // Force alignment to long word boundary
+ dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+ // Build up the debug instruction
+ dbg[0] = 0x2c80 | (reg & 0xf);
+ dbg[1] = (data >> 16) & 0xffff;
+ dbg[2] = data & 0xffff;
+ dbg[3] = 0;
+
+ // Perform the wdebug instruction
+#if 0
+ // This strain is for gas which doesn't have the wdebug instructions defined
+ asm( "move.l %0, %%a0\n\t"
+ ".word 0xfbd0\n\t"
+ ".word 0x0003\n\t"
+ :: "g" (dbg) : "a0");
+#else
+ // And this is for when it does
+ asm( "wdebug (%0)" :: "a" (dbg));
+#endif
+}
+
+#endif
--- /dev/null
+/*
+ * md.h: High speed xor_block operation for RAID4/5
+ *
+ */
+
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT sizeof(long)
+
+#endif /* __ASM_MD_H */
--- /dev/null
+#ifndef __M68K_MMAN_H__
+#define __M68K_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* __M68K_MMAN_H__ */
--- /dev/null
+#ifdef __uClinux__
+#include "mmu_no.h"
+#else
+#include "mmu_mm.h"
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "mmu_context_no.h"
+#else
+#include "mmu_context_mm.h"
+#endif
--- /dev/null
+#ifndef __M68K_MMU_CONTEXT_H
+#define __M68K_MMU_CONTEXT_H
+
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifndef CONFIG_SUN3
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ mm->context = virt_to_phys(mm->pgd);
+ return 0;
+}
+
+#define destroy_context(mm) do { } while(0)
+
+static inline void switch_mm_0230(struct mm_struct *mm)
+{
+ unsigned long crp[2] = {
+ 0x80000000 | _PAGE_TABLE, mm->context
+ };
+ unsigned long tmp;
+
+ asm volatile (".chip 68030");
+
+ /* flush MC68030/MC68020 caches (they are virtually addressed) */
+ asm volatile (
+ "movec %%cacr,%0;"
+ "orw %1,%0; "
+ "movec %0,%%cacr"
+ : "=d" (tmp) : "di" (FLUSH_I_AND_D));
+
+ /* Switch the root pointer. For a 030-only kernel,
+ * avoid flushing the whole ATC, we only need to
+ * flush the user entries. The 68851 does this by
+ * itself. Avoid a runtime check here.
+ */
+ asm volatile (
+#ifdef CPU_M68030_ONLY
+ "pmovefd %0,%%crp; "
+ "pflush #0,#4"
+#else
+ "pmove %0,%%crp"
+#endif
+ : : "m" (crp[0]));
+
+ asm volatile (".chip 68k");
+}
+
+static inline void switch_mm_0460(struct mm_struct *mm)
+{
+ asm volatile (".chip 68040");
+
+ /* flush address translation cache (user entries) */
+ asm volatile ("pflushan");
+
+ /* switch the root pointer */
+ asm volatile ("movec %0,%%urp" : : "r" (mm->context));
+
+ if (CPU_IS_060) {
+ unsigned long tmp;
+
+ /* clear user entries in the branch cache */
+ asm volatile (
+ "movec %%cacr,%0; "
+ "orl %1,%0; "
+ "movec %0,%%cacr"
+ : "=d" (tmp): "di" (0x00200000));
+ }
+
+ asm volatile (".chip 68k");
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+ if (prev != next) {
+ if (CPU_IS_020_OR_030)
+ switch_mm_0230(next);
+ else
+ switch_mm_0460(next);
+ }
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+ next_mm->context = virt_to_phys(next_mm->pgd);
+
+ if (CPU_IS_020_OR_030)
+ switch_mm_0230(next_mm);
+ else
+ switch_mm_0460(next_mm);
+}
+
+#else /* CONFIG_SUN3 */
+#include <asm/sun3mmu.h>
+#include <linux/sched.h>
+
+extern unsigned long get_free_context(struct mm_struct *mm);
+extern void clear_context(unsigned long context);
+
+/* set the context for a new task to unmapped */
+static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ mm->context = SUN3_INVALID_CONTEXT;
+ return 0;
+}
+
+/* find the context given to this process, and if it hasn't already
+ got one, go get one for it. */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ if(mm->context == SUN3_INVALID_CONTEXT)
+ mm->context = get_free_context(mm);
+}
+
+/* flush context if allocated... */
+static inline void destroy_context(struct mm_struct *mm)
+{
+ if(mm->context != SUN3_INVALID_CONTEXT)
+ clear_context(mm->context);
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+ get_mmu_context(mm);
+ sun3_put_context(mm->context);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+ activate_context(tsk->mm);
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+ activate_context(next_mm);
+}
+
+#endif
+#endif
--- /dev/null
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ // mm->context = virt_to_phys(mm->pgd);
+ return(0);
+}
+
+#define destroy_context(mm) do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+}
+
+#endif
--- /dev/null
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
--- /dev/null
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+ unsigned long end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */
--- /dev/null
+#ifndef _ASM_M68K_MMZONE_H_
+#define _ASM_M68K_MMZONE_H_
+
+extern pg_data_t pg_data_map[];
+
+#define NODE_DATA(nid) (&pg_data_map[nid])
+#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map)
+
+#endif /* _ASM_M68K_MMZONE_H_ */
--- /dev/null
+#ifdef __uClinux__
+#include "module_no.h"
+#else
+#include "module_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_M68K_MODULE_H
+#define _ASM_M68K_MODULE_H
+
+struct mod_arch_specific {
+ struct m68k_fixup_info *fixup_start, *fixup_end;
+};
+
+#define MODULE_ARCH_INIT { \
+ .fixup_start = __start_fixup, \
+ .fixup_end = __stop_fixup, \
+}
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+
+enum m68k_fixup_type {
+ m68k_fixup_memoffset,
+ m68k_fixup_vnode_shift,
+};
+
+struct m68k_fixup_info {
+ enum m68k_fixup_type type;
+ void *addr;
+};
+
+#define m68k_fixup(type, addr) \
+ " .section \".m68k_fixup\",\"aw\"\n" \
+ " .long " #type "," #addr "\n" \
+ " .previous\n"
+
+extern struct m68k_fixup_info __start_fixup[], __stop_fixup[];
+
+struct module;
+extern void module_fixup(struct module *mod, struct m68k_fixup_info *start,
+ struct m68k_fixup_info *end);
+
+#endif /* _ASM_M68K_MODULE_H */
--- /dev/null
+#ifndef ASM_M68KNOMMU_MODULE_H
+#define ASM_M68KNOMMU_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif /* ASM_M68KNOMMU_MODULE_H */
--- /dev/null
+#ifndef _MOTOROLA_PGALLOC_H
+#define _MOTOROLA_PGALLOC_H
+
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+extern pmd_t *get_pointer_table(void);
+extern int free_pointer_table(pmd_t *);
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte;
+
+ pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ if (pte) {
+ __flush_page_to_ram(pte);
+ flush_tlb_kernel_page(pte);
+ nocache_page(pte);
+ }
+
+ return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ cache_page(pte);
+ free_page((unsigned long) pte);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+ pte_t *pte;
+
+ if(!page)
+ return NULL;
+
+ pte = kmap(page);
+ if (pte) {
+ __flush_page_to_ram(pte);
+ flush_tlb_kernel_page(pte);
+ nocache_page(pte);
+ }
+ kunmap(pte);
+ pgtable_page_ctor(page);
+ return page;
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t page)
+{
+ pgtable_page_dtor(page);
+ cache_page(kmap(page));
+ kunmap(page);
+ __free_page(page);
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+{
+ pgtable_page_dtor(page);
+ cache_page(kmap(page));
+ kunmap(page);
+ __free_page(page);
+}
+
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ return get_pointer_table();
+}
+
+static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+ return free_pointer_table(pmd);
+}
+
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+ return free_pointer_table(pmd);
+}
+
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ pmd_free(mm, (pmd_t *)pgd);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return (pgd_t *)get_pointer_table();
+}
+
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+ pmd_set(pmd, pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
+{
+ pmd_set(pmd, page_address(page));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+ pgd_set(pgd, pmd);
+}
+
+#endif /* _MOTOROLA_PGALLOC_H */
--- /dev/null
+#ifndef _MOTOROLA_PGTABLE_H
+#define _MOTOROLA_PGTABLE_H
+
+
+/*
+ * Definitions for MMU descriptors
+ */
+#define _PAGE_PRESENT 0x001
+#define _PAGE_SHORT 0x002
+#define _PAGE_RONLY 0x004
+#define _PAGE_ACCESSED 0x008
+#define _PAGE_DIRTY 0x010
+#define _PAGE_SUPER 0x080 /* 68040 supervisor only */
+#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */
+#define _PAGE_NOCACHE030 0x040 /* 68030 no-cache mode */
+#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */
+#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */
+#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */
+#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */
+
+#define _DESCTYPE_MASK 0x003
+
+#define _CACHEMASK040 (~0x060)
+#define _TABLE_MASK (0xfffffe00)
+
+#define _PAGE_TABLE (_PAGE_SHORT)
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE)
+
+#define _PAGE_PROTNONE 0x004
+#define _PAGE_FILE 0x008 /* pagecache or swap? */
+
+#ifndef __ASSEMBLY__
+
+/* This is the cache mode to be used for pages containing page descriptors for
+ * processors >= '040. It is in pte_mknocache(), and the variable is defined
+ * and initialized in head.S */
+extern int m68k_pgtable_cachemode;
+
+/* This is the cache mode for normal pages, for supervisor access on
+ * processors >= '040. It is used in pte_mkcache(), and the variable is
+ * defined and initialized in head.S */
+
+#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH)
+#define m68k_supervisor_cachemode _PAGE_CACHE040W
+#elif defined(CPU_M68040_OR_M68060_ONLY)
+#define m68k_supervisor_cachemode _PAGE_CACHE040
+#elif defined(CPU_M68020_OR_M68030_ONLY)
+#define m68k_supervisor_cachemode 0
+#else
+extern int m68k_supervisor_cachemode;
+#endif
+
+#if defined(CPU_M68040_OR_M68060_ONLY)
+#define mm_cachebits _PAGE_CACHE040
+#elif defined(CPU_M68020_OR_M68030_ONLY)
+#define mm_cachebits 0
+#else
+extern unsigned long mm_cachebits;
+#endif
+
+#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits)
+
+/* Alternate definitions that are compile time constants, for
+ initializing protection_map. The cachebits are fixed later. */
+#define PAGE_NONE_C __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED_C __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define PAGE_COPY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
+#define PAGE_READONLY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
+
+/*
+ * The m68k can't do page protection for execute, and considers that the same are read.
+ * Also, write permissions imply read permissions. This is the closest we can get..
+ */
+#define __P000 PAGE_NONE_C
+#define __P001 PAGE_READONLY_C
+#define __P010 PAGE_COPY_C
+#define __P011 PAGE_COPY_C
+#define __P100 PAGE_READONLY_C
+#define __P101 PAGE_READONLY_C
+#define __P110 PAGE_COPY_C
+#define __P111 PAGE_COPY_C
+
+#define __S000 PAGE_NONE_C
+#define __S001 PAGE_READONLY_C
+#define __S010 PAGE_SHARED_C
+#define __S011 PAGE_SHARED_C
+#define __S100 PAGE_READONLY_C
+#define __S101 PAGE_READONLY_C
+#define __S110 PAGE_SHARED_C
+#define __S111 PAGE_SHARED_C
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
+{
+ unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED;
+ unsigned long *ptr = pmdp->pmd;
+ short i = 16;
+ while (--i >= 0) {
+ *ptr++ = ptbl;
+ ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16);
+ }
+}
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+ pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp);
+}
+
+#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK))
+#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK))
+#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK))
+
+
+#define pte_none(pte) (!pte_val(pte))
+#define pte_present(pte) (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,ptep) ({ pte_val(*(ptep)) = 0; })
+
+#define pte_page(pte) virt_to_page(__va(pte_val(pte)))
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) ((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE)
+#define pmd_present(pmd) (pmd_val(pmd) & _PAGE_TABLE)
+#define pmd_clear(pmdp) ({ \
+ unsigned long *__ptr = pmdp->pmd; \
+ short __i = 16; \
+ while (--__i >= 0) \
+ *__ptr++ = 0; \
+})
+#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+
+
+#define pgd_none(pgd) (!pgd_val(pgd))
+#define pgd_bad(pgd) ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE)
+#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_TABLE)
+#define pgd_clear(pgdp) ({ pgd_val(*pgdp) = 0; })
+#define pgd_page(pgd) (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT))
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte) { return !(pte_val(pte) & _PAGE_RONLY); }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte) { return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) |= _PAGE_RONLY; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) &= ~_PAGE_RONLY; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mknocache(pte_t pte)
+{
+ pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode;
+ return pte;
+}
+static inline pte_t pte_mkcache(pte_t pte)
+{
+ pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode;
+ return pte;
+}
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+static inline pgd_t *pgd_offset(const struct mm_struct *mm,
+ unsigned long address)
+{
+ return mm->pgd + pgd_index(address);
+}
+
+#define swapper_pg_dir kernel_pg_dir
+extern pgd_t kernel_pg_dir[128];
+
+static inline pgd_t *pgd_offset_k(unsigned long address)
+{
+ return kernel_pg_dir + (address >> PGDIR_SHIFT);
+}
+
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+ return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1));
+}
+
+/* Find an entry in the third-level page table.. */
+static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address)
+{
+ return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1));
+}
+
+#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
+#define pte_unmap(pte) ((void)0)
+#define pte_unmap_nested(pte) ((void)0)
+
+/*
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+/* Prior to calling these routines, the page should have been flushed
+ * from both the cache and ATC, or the CPU might not notice that the
+ * cache setting for the page has been changed. -jskov
+ */
+static inline void nocache_page(void *vaddr)
+{
+ unsigned long addr = (unsigned long)vaddr;
+
+ if (CPU_IS_040_OR_060) {
+ pgd_t *dir;
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ dir = pgd_offset_k(addr);
+ pmdp = pmd_offset(dir, addr);
+ ptep = pte_offset_kernel(pmdp, addr);
+ *ptep = pte_mknocache(*ptep);
+ }
+}
+
+static inline void cache_page(void *vaddr)
+{
+ unsigned long addr = (unsigned long)vaddr;
+
+ if (CPU_IS_040_OR_060) {
+ pgd_t *dir;
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ dir = pgd_offset_k(addr);
+ pmdp = pmd_offset(dir, addr);
+ ptep = pte_offset_kernel(pmdp, addr);
+ *ptep = pte_mkcache(*ptep);
+ }
+}
+
+#define PTE_FILE_MAX_BITS 28
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+ return pte.pte >> 4;
+}
+
+static inline pte_t pgoff_to_pte(unsigned off)
+{
+ pte_t pte = { (off << 4) + _PAGE_FILE };
+ return pte;
+}
+
+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
+#define __swp_type(x) (((x).val >> 4) & 0xff)
+#define __swp_offset(x) ((x).val >> 12)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _MOTOROLA_PGTABLE_H */
--- /dev/null
+#ifndef __MOVS_H__
+#define __MOVS_H__
+
+/*
+** movs.h
+**
+** Inline assembly macros to generate movs & related instructions
+*/
+
+/* Set DFC register value */
+
+#define SET_DFC(x) \
+ __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x));
+
+/* Get DFC register value */
+
+#define GET_DFC(x) \
+ __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : );
+
+/* Set SFC register value */
+
+#define SET_SFC(x) \
+ __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x));
+
+/* Get SFC register value */
+
+#define GET_SFC(x) \
+ __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : );
+
+#define SET_VBR(x) \
+ __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x));
+
+#define GET_VBR(x) \
+ __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : );
+
+/* Set a byte using the "movs" instruction */
+
+#define SET_CONTROL_BYTE(addr,value) \
+ __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr));
+
+/* Get a byte using the "movs" instruction */
+
+#define GET_CONTROL_BYTE(addr,value) \
+ __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr));
+
+/* Set a (long)word using the "movs" instruction */
+
+#define SET_CONTROL_WORD(addr,value) \
+ __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr));
+
+/* Get a (long)word using the "movs" instruction */
+
+#define GET_CONTROL_WORD(addr,value) \
+ __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr));
+#endif
--- /dev/null
+#ifndef _M68K_MSGBUF_H
+#define _M68K_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _M68K_MSGBUF_H */
--- /dev/null
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
--- /dev/null
+#ifndef _MVME147HW_H_
+#define _MVME147HW_H_
+
+#include <asm/irq.h>
+
+typedef struct {
+ unsigned char
+ ctrl,
+ bcd_sec,
+ bcd_min,
+ bcd_hr,
+ bcd_dow,
+ bcd_dom,
+ bcd_mth,
+ bcd_year;
+} MK48T02;
+
+#define RTC_WRITE 0x80
+#define RTC_READ 0x40
+#define RTC_STOP 0x20
+
+#define m147_rtc ((MK48T02 * volatile)0xfffe07f8)
+
+
+struct pcc_regs {
+ volatile u_long dma_tadr;
+ volatile u_long dma_dadr;
+ volatile u_long dma_bcr;
+ volatile u_long dma_hr;
+ volatile u_short t1_preload;
+ volatile u_short t1_count;
+ volatile u_short t2_preload;
+ volatile u_short t2_count;
+ volatile u_char t1_int_cntrl;
+ volatile u_char t1_cntrl;
+ volatile u_char t2_int_cntrl;
+ volatile u_char t2_cntrl;
+ volatile u_char ac_fail;
+ volatile u_char watchdog;
+ volatile u_char lpt_intr;
+ volatile u_char lpt_cntrl;
+ volatile u_char dma_intr;
+ volatile u_char dma_cntrl;
+ volatile u_char bus_error;
+ volatile u_char dma_status;
+ volatile u_char abort;
+ volatile u_char ta_fnctl;
+ volatile u_char serial_cntrl;
+ volatile u_char general_cntrl;
+ volatile u_char lan_cntrl;
+ volatile u_char general_status;
+ volatile u_char scsi_interrupt;
+ volatile u_char slave;
+ volatile u_char soft1_cntrl;
+ volatile u_char int_base;
+ volatile u_char soft2_cntrl;
+ volatile u_char revision_level;
+ volatile u_char lpt_data;
+ volatile u_char lpt_status;
+ };
+
+#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000)
+
+
+#define PCC_INT_ENAB 0x08
+
+#define PCC_TIMER_INT_CLR 0x80
+#define PCC_TIMER_PRELOAD 63936l
+
+#define PCC_LEVEL_ABORT 0x07
+#define PCC_LEVEL_SERIAL 0x04
+#define PCC_LEVEL_ETH 0x04
+#define PCC_LEVEL_TIMER1 0x04
+#define PCC_LEVEL_SCSI_PORT 0x04
+#define PCC_LEVEL_SCSI_DMA 0x04
+
+#define PCC_IRQ_AC_FAIL (IRQ_USER+0)
+#define PCC_IRQ_BERR (IRQ_USER+1)
+#define PCC_IRQ_ABORT (IRQ_USER+2)
+/* #define PCC_IRQ_SERIAL (IRQ_USER+3) */
+#define PCC_IRQ_PRINTER (IRQ_USER+7)
+#define PCC_IRQ_TIMER1 (IRQ_USER+8)
+#define PCC_IRQ_TIMER2 (IRQ_USER+9)
+#define PCC_IRQ_SOFTWARE1 (IRQ_USER+10)
+#define PCC_IRQ_SOFTWARE2 (IRQ_USER+11)
+
+
+#define M147_SCC_A_ADDR 0xfffe3002
+#define M147_SCC_B_ADDR 0xfffe3000
+#define M147_SCC_PCLK 5000000
+
+#define MVME147_IRQ_SCSI_PORT (IRQ_USER+0x45)
+#define MVME147_IRQ_SCSI_DMA (IRQ_USER+0x46)
+
+/* SCC interrupts, for MVME147 */
+
+#define MVME147_IRQ_TYPE_PRIO 0
+#define MVME147_IRQ_SCC_BASE (IRQ_USER+32)
+#define MVME147_IRQ_SCCB_TX (IRQ_USER+32)
+#define MVME147_IRQ_SCCB_STAT (IRQ_USER+34)
+#define MVME147_IRQ_SCCB_RX (IRQ_USER+36)
+#define MVME147_IRQ_SCCB_SPCOND (IRQ_USER+38)
+#define MVME147_IRQ_SCCA_TX (IRQ_USER+40)
+#define MVME147_IRQ_SCCA_STAT (IRQ_USER+42)
+#define MVME147_IRQ_SCCA_RX (IRQ_USER+44)
+#define MVME147_IRQ_SCCA_SPCOND (IRQ_USER+46)
+
+#define MVME147_LANCE_BASE 0xfffe1800
+#define MVME147_LANCE_IRQ (IRQ_USER+4)
+
+#define ETHERNET_ADDRESS 0xfffe0778
+
+#endif
--- /dev/null
+#ifndef _M68K_MVME16xHW_H_
+#define _M68K_MVME16xHW_H_
+
+#include <asm/irq.h>
+
+/* Board ID data structure - pointer to this retrieved from Bug by head.S */
+
+/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */
+
+extern long mvme_bdid_ptr;
+
+typedef struct {
+ char bdid[4];
+ u_char rev, mth, day, yr;
+ u_short size, reserved;
+ u_short brdno;
+ char brdsuffix[2];
+ u_long options;
+ u_short clun, dlun, ctype, dnum;
+ u_long option2;
+} t_bdid, *p_bdid;
+
+
+typedef struct {
+ u_char ack_icr,
+ flt_icr,
+ sel_icr,
+ pe_icr,
+ bsy_icr,
+ spare1,
+ isr,
+ cr,
+ spare2,
+ spare3,
+ spare4,
+ data;
+} MVMElp, *MVMElpPtr;
+
+#define MVME_LPR_BASE 0xfff42030
+
+#define mvmelp ((*(volatile MVMElpPtr)(MVME_LPR_BASE)))
+
+typedef struct {
+ unsigned char
+ ctrl,
+ bcd_sec,
+ bcd_min,
+ bcd_hr,
+ bcd_dow,
+ bcd_dom,
+ bcd_mth,
+ bcd_year;
+} MK48T08_t, *MK48T08ptr_t;
+
+#define RTC_WRITE 0x80
+#define RTC_READ 0x40
+#define RTC_STOP 0x20
+
+#define MVME_RTC_BASE 0xfffc1ff8
+
+#define MVME_I596_BASE 0xfff46000
+
+#define MVME_SCC_A_ADDR 0xfff45005
+#define MVME_SCC_B_ADDR 0xfff45001
+#define MVME_SCC_PCLK 10000000
+
+#define MVME162_IRQ_TYPE_PRIO 0
+
+#define MVME167_IRQ_PRN (IRQ_USER+20)
+#define MVME16x_IRQ_I596 (IRQ_USER+23)
+#define MVME16x_IRQ_SCSI (IRQ_USER+21)
+#define MVME16x_IRQ_FLY (IRQ_USER+63)
+#define MVME167_IRQ_SER_ERR (IRQ_USER+28)
+#define MVME167_IRQ_SER_MODEM (IRQ_USER+29)
+#define MVME167_IRQ_SER_TX (IRQ_USER+30)
+#define MVME167_IRQ_SER_RX (IRQ_USER+31)
+#define MVME16x_IRQ_TIMER (IRQ_USER+25)
+#define MVME167_IRQ_ABORT (IRQ_USER+46)
+#define MVME162_IRQ_ABORT (IRQ_USER+30)
+
+/* SCC interrupts, for MVME162 */
+#define MVME162_IRQ_SCC_BASE (IRQ_USER+0)
+#define MVME162_IRQ_SCCB_TX (IRQ_USER+0)
+#define MVME162_IRQ_SCCB_STAT (IRQ_USER+2)
+#define MVME162_IRQ_SCCB_RX (IRQ_USER+4)
+#define MVME162_IRQ_SCCB_SPCOND (IRQ_USER+6)
+#define MVME162_IRQ_SCCA_TX (IRQ_USER+8)
+#define MVME162_IRQ_SCCA_STAT (IRQ_USER+10)
+#define MVME162_IRQ_SCCA_RX (IRQ_USER+12)
+#define MVME162_IRQ_SCCA_SPCOND (IRQ_USER+14)
+
+/* MVME162 version register */
+
+#define MVME162_VERSION_REG 0xfff4202e
+
+extern unsigned short mvme16x_config;
+
+/* Lower 8 bits must match the revision register in the MC2 chip */
+
+#define MVME16x_CONFIG_SPEED_32 0x0001
+#define MVME16x_CONFIG_NO_VMECHIP2 0x0002
+#define MVME16x_CONFIG_NO_SCSICHIP 0x0004
+#define MVME16x_CONFIG_NO_ETHERNET 0x0008
+#define MVME16x_CONFIG_GOT_FPU 0x0010
+
+#define MVME16x_CONFIG_GOT_LP 0x0100
+#define MVME16x_CONFIG_GOT_CD2401 0x0200
+#define MVME16x_CONFIG_GOT_SCCA 0x0400
+#define MVME16x_CONFIG_GOT_SCCB 0x0800
+
+#endif
--- /dev/null
+/****************************************************************************/
+
+/*
+ * nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com)
+ * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef nettel_h
+#define nettel_h
+/****************************************************************************/
+
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ * NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ * GPIO lines. Most of the LED's are driver through a latch
+ * connected to CS2.
+ */
+#define MCFPP_DCD1 0x0001
+#define MCFPP_DCD0 0x0002
+#define MCFPP_DTR1 0x0004
+#define MCFPP_DTR0 0x0008
+
+#define NETtel_LEDADDR 0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ * These functions defined to give quasi generic access to the
+ * PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+ return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+ ppdata = (ppdata & ~mask) | bits;
+ *pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ * NETtel/5206e based hardware has leds on latch on CS3.
+ * No support modem for lines??
+ */
+#define NETtel_LEDADDR 0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define MCFPP_DCD0 0x0080
+#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */
+#define MCFPP_DTR0 0x0040
+#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ * These functions defined to give quasi generic access to the
+ * PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+ return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+ *pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif /* nettel_h */
--- /dev/null
+#ifndef _ASM_M68K_NUBUS_H
+#define _ASM_M68K_NUBUS_H
+
+#include <asm/raw_io.h>
+
+#define nubus_readb raw_inb
+#define nubus_readw raw_inw
+#define nubus_readl raw_inl
+
+#define nubus_writeb raw_outb
+#define nubus_writew raw_outw
+#define nubus_writel raw_outl
+
+#define nubus_memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define nubus_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define nubus_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+static inline void *nubus_remap_nocache_ser(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void *nubus_remap_nocache_nonser(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
+}
+
+static inline void *nbus_remap_writethrough(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void *nubus_remap_fullcache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define nubus_unmap iounmap
+#define nubus_iounmap iounmap
+#define nubus_ioremap nubus_remap_nocache_ser
+
+#endif /* _ASM_NUBUS_H */
--- /dev/null
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h: Prom structures and defines for access to the OPENBOOT
+ * prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+/* Empirical constants... */
+#ifdef CONFIG_SUN3
+#define KADB_DEBUGGER_BEGVM 0x0fee0000 /* There is no kadb yet but...*/
+#define LINUX_OPPROM_BEGVM 0x0fef0000
+#define LINUX_OPPROM_ENDVM 0x0ff10000 /* I think this is right - tm */
+#else
+#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */
+#define LINUX_OPPROM_BEGVM 0xffd00000
+#define LINUX_OPPROM_ENDVM 0xfff00000
+#define LINUX_OPPROM_MAGIC 0x10010407
+#endif
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+ int (*v0_devopen)(char *device_str);
+ int (*v0_devclose)(int dev_desc);
+ int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+ int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+ int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+ int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+ int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+ int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+ int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+ int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */
+ char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+ void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+ /* To map devices into virtual I/O space. */
+ char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+ void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+ int (*v2_dev_open)(char *devpath);
+ void (*v2_dev_close)(int d);
+ int (*v2_dev_read)(int d, char *buf, int nbytes);
+ int (*v2_dev_write)(int d, char *buf, int nbytes);
+ int (*v2_dev_seek)(int d, int hi, int lo);
+
+ /* Never issued (multistage load support) */
+ void (*v2_wheee2)(void);
+ void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+ struct linux_mlist_v0 *theres_more;
+ char *start_adr;
+ unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+ struct linux_mlist_v0 **v0_totphys;
+ struct linux_mlist_v0 **v0_prommap;
+ struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+ char *argv[8];
+ char args[100];
+ char boot_dev[2];
+ int boot_dev_ctrl;
+ int boot_dev_unit;
+ int dev_partition;
+ char *kernel_file_name;
+ void *aieee1; /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+ char **bootpath;
+ char **bootargs;
+ int *fd_stdin;
+ int *fd_stdout;
+};
+
+#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+struct linux_romvec {
+ char *pv_initsp;
+ int (*pv_startmon)(void);
+
+ int *diagberr;
+
+ struct linux_arguments_v0 **pv_v0bootargs;
+ unsigned *pv_sun3mem;
+
+ unsigned char (*pv_getchar)(void);
+ int (*pv_putchar)(int ch);
+ int (*pv_nbgetchar)(void);
+ int (*pv_nbputchar)(int ch);
+ unsigned char *pv_echo;
+ unsigned char *pv_insource;
+ unsigned char *pv_outsink;
+
+ int (*pv_getkey)(void);
+ int (*pv_initgetkey)(void);
+ unsigned int *pv_translation;
+ unsigned char *pv_keybid;
+ int *pv_screen_x;
+ int *pv_screen_y;
+ struct keybuf *pv_keybuf;
+
+ char *pv_monid;
+
+ /*
+ * Frame buffer output and terminal emulation
+ */
+
+ int (*pv_fbwritechar)(char);
+ int *pv_fbaddr;
+ char **pv_font;
+ int (*pv_fbwritestr)(char);
+
+ void (*pv_reboot)(char *bootstr);
+
+ /*
+ * Line input and parsing
+ */
+
+ unsigned char *pv_linebuf;
+ unsigned char **pv_lineptr;
+ int *pv_linesize;
+ int (*pv_getline)(void);
+ unsigned char (*pv_getnextchar)(void);
+ unsigned char (*pv_peeknextchar)(void);
+ int *pv_fbthere;
+ int (*pv_getnum)(void);
+
+ void (*pv_printf)(const char *fmt, ...);
+ int (*pv_printhex)(void);
+
+ unsigned char *pv_leds;
+ int (*pv_setleds)(void);
+
+ /*
+ * Non-maskable interrupt (nmi) information
+ */
+
+ int (*pv_nmiaddr)(void);
+ int (*pv_abortentry)(void);
+ int *pv_nmiclock;
+
+ int *pv_fbtype;
+
+ /*
+ * Assorted other things
+ */
+
+ unsigned pv_romvers;
+ struct globram *pv_globram;
+ char *pv_kbdzscc;
+
+ int *pv_keyrinit;
+ unsigned char *pv_keyrtick;
+ unsigned *pv_memoryavail;
+ long *pv_resetaddr;
+ long *pv_resetmap;
+
+ void (*pv_halt)(void);
+ unsigned char *pv_memorybitmap;
+
+#ifdef CONFIG_SUN3
+ void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+ void (*pv_vector_cmd)(void);
+ int dummy1z;
+ int dummy2z;
+ int dummy3z;
+ int dummy4z;
+#endif
+};
+#else
+/* The top level PROM vector. */
+struct linux_romvec {
+ /* Version numbers. */
+ unsigned int pv_magic_cookie;
+ unsigned int pv_romvers;
+ unsigned int pv_plugin_revision;
+ unsigned int pv_printrev;
+
+ /* Version 0 memory descriptors. */
+ struct linux_mem_v0 pv_v0mem;
+
+ /* Node operations. */
+ struct linux_nodeops *pv_nodeops;
+
+ char **pv_bootstr;
+ struct linux_dev_v0_funcs pv_v0devops;
+
+ char *pv_stdin;
+ char *pv_stdout;
+#define PROMDEV_KBD 0 /* input from keyboard */
+#define PROMDEV_SCREEN 0 /* output to screen */
+#define PROMDEV_TTYA 1 /* in/out to ttya */
+#define PROMDEV_TTYB 2 /* in/out to ttyb */
+
+ /* Blocking getchar/putchar. NOT REENTRANT! (grr) */
+ int (*pv_getchar)(void);
+ void (*pv_putchar)(int ch);
+
+ /* Non-blocking variants. */
+ int (*pv_nbgetchar)(void);
+ int (*pv_nbputchar)(int ch);
+
+ void (*pv_putstr)(char *str, int len);
+
+ /* Miscellany. */
+ void (*pv_reboot)(char *bootstr);
+ void (*pv_printf)(__const__ char *fmt, ...);
+ void (*pv_abort)(void);
+ __volatile__ int *pv_ticks;
+ void (*pv_halt)(void);
+ void (**pv_synchook)(void);
+
+ /* Evaluate a forth string, not different proto for V0 and V2->up. */
+ union {
+ void (*v0_eval)(int len, char *str);
+ void (*v2_eval)(char *str);
+ } pv_fortheval;
+
+ struct linux_arguments_v0 **pv_v0bootargs;
+
+ /* Get ether address. */
+ unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+ struct linux_bootargs_v2 pv_v2bootargs;
+ struct linux_dev_v2_funcs pv_v2devops;
+
+ int filler[15];
+
+ /* This one is sun4c/sun4 only. */
+ void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+ /* Prom version 3 Multiprocessor routines. This stuff is crazy.
+ * No joke. Calling these when there is only one cpu probably
+ * crashes the machine, have to test this. :-)
+ */
+
+ /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+ * 'thiscontext' executing at address 'prog_counter'
+ */
+ int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+ int thiscontext, char *prog_counter);
+
+ /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+ * until a resume cpu call is made.
+ */
+ int (*v3_cpustop)(unsigned int whichcpu);
+
+ /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+ * resume cpu call is made.
+ */
+ int (*v3_cpuidle)(unsigned int whichcpu);
+
+ /* v3_cpuresume() will resume processor 'whichcpu' executing
+ * starting with whatever 'pc' and 'npc' were left at the
+ * last 'idle' or 'stop' call.
+ */
+ int (*v3_cpuresume)(unsigned int whichcpu);
+};
+#endif
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+ int (*no_nextnode)(int node);
+ int (*no_child)(int node);
+ int (*no_proplen)(int node, char *name);
+ int (*no_getprop)(int node, char *name, char *val);
+ int (*no_setprop)(int node, char *name, char *val, int len);
+ char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX 16
+#define PROMVADDR_MAX 16
+#define PROMINTR_MAX 15
+
+struct linux_prom_registers {
+ int which_io; /* is this in OBIO space? */
+ char *phys_addr; /* The physical address of this register */
+ int reg_size; /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+ int pri; /* IRQ priority */
+ int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+ unsigned int ot_child_space;
+ unsigned int ot_child_base; /* Bus feels this */
+ unsigned int ot_parent_space;
+ unsigned int ot_parent_base; /* CPU looks from here */
+ unsigned int or_size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
--- /dev/null
+/*
+ * oplib.h: Describes the interface and available routines in the
+ * Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+ PROM_V0, /* Original sun4c V0 prom */
+ PROM_V2, /* sun4c and early sun4m V2 prom */
+ PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */
+ PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions. Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible. Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string. Note, that the format
+ * of the string is different on V0 vs. V2->higher proms. The caller must
+ * know what he/she is doing! Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+ unsigned int seek_lowval);
+
+/* Machine memory configuration routine. */
+
+/* This function returns a V0 format memory descriptor table, it has three
+ * entries. One for the total amount of physical ram on the machine, one
+ * for the amount of physical ram available, and one describing the virtual
+ * areas which are allocated by the prom. So, in a sense the physical
+ * available is a calculation of the total physical minus the physical mapped
+ * by the prom with virtual mappings.
+ *
+ * These lists are returned pre-sorted, this should make your life easier
+ * since the prom itself is way too lazy to do such nice things.
+ */
+extern struct linux_mem_v0 *prom_meminfo(void);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void);
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree. This
+ * gets passed a buffer where you would like it stuffed. The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal printf routine, don't use in kernel/boot code. */
+void prom_printf(char *fmt, ...);
+
+/* Query for input device type */
+
+enum prom_input_device {
+ PROMDEV_IKBD, /* input from keyboard */
+ PROMDEV_ITTYA, /* input from ttya */
+ PROMDEV_ITTYB, /* input from ttyb */
+ PROMDEV_I_UNK,
+};
+
+extern enum prom_input_device prom_query_input_device(void);
+
+/* Query for output device type */
+
+enum prom_output_device {
+ PROMDEV_OSCREEN, /* to screen */
+ PROMDEV_OTTYA, /* to ttya */
+ PROMDEV_OTTYB, /* to ttyb */
+ PROMDEV_O_UNK,
+};
+
+extern enum prom_output_device prom_query_output_device(void);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+ int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+ int physical_segment);
+
+/* PROM device tree traversal functions... */
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer. Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, char *property,
+ char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string. Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node);
+
+/* Returns the next property after the passed property for the given
+ * node. Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+ int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Adjust reg values with the passed ranges. */
+extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
+ struct linux_prom_ranges *rangep, int nranges);
+
+/* Adjust child ranges with the passed parent ranges. */
+extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges,
+ struct linux_prom_ranges *pranges, int npranges);
+
+/* Apply promlib probed OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+ struct linux_prom_registers *sbusregs, int nregs);
+
+
+#endif /* !(__SPARC_OPLIB_H) */
--- /dev/null
+#ifdef __uClinux__
+#include "page_no.h"
+#else
+#include "page_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_PAGE_H
+#define _M68K_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#ifndef CONFIG_SUN3
+#define PAGE_SHIFT (12)
+#else
+#define PAGE_SHIFT (13)
+#endif
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#if PAGE_SHIFT < 13
+#define THREAD_SIZE (8192)
+#else
+#define THREAD_SIZE PAGE_SIZE
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+
+#include <asm/module.h>
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+/*
+ * We don't need to check for alignment etc.
+ */
+#ifdef CPU_M68040_OR_M68060_ONLY
+static inline void copy_page(void *to, void *from)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__("1:\t"
+ ".chip 68040\n\t"
+ "move16 %1@+,%0@+\n\t"
+ "move16 %1@+,%0@+\n\t"
+ ".chip 68k\n\t"
+ "dbra %2,1b\n\t"
+ : "=a" (to), "=a" (from), "=d" (tmp)
+ : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1)
+ );
+}
+
+static inline void clear_page(void *page)
+{
+ unsigned long tmp;
+ unsigned long *sp = page;
+
+ *sp++ = 0;
+ *sp++ = 0;
+ *sp++ = 0;
+ *sp++ = 0;
+
+ __asm__ __volatile__("1:\t"
+ ".chip 68040\n\t"
+ "move16 %2@+,%0@+\n\t"
+ ".chip 68k\n\t"
+ "subqw #8,%2\n\t"
+ "subqw #8,%2\n\t"
+ "dbra %1,1b\n\t"
+ : "=a" (sp), "=d" (tmp)
+ : "a" (page), "0" (sp),
+ "1" ((PAGE_SIZE - 16) / 16 - 1));
+}
+
+#else
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+#endif
+
+#define clear_user_page(addr, vaddr, page) \
+ do { clear_page(addr); \
+ flush_dcache_page(page); \
+ } while (0)
+#define copy_user_page(to, from, vaddr, page) \
+ do { copy_page(to, from); \
+ flush_dcache_page(page); \
+ } while (0)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((&x)->pmd[0])
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long m68k_memoffset;
+
+#ifndef CONFIG_SUN3
+
+#define WANT_PAGE_VIRTUAL
+
+static inline unsigned long ___pa(void *vaddr)
+{
+ unsigned long paddr;
+ asm (
+ "1: addl #0,%0\n"
+ m68k_fixup(%c2, 1b+2)
+ : "=r" (paddr)
+ : "0" (vaddr), "i" (m68k_fixup_memoffset));
+ return paddr;
+}
+#define __pa(vaddr) ___pa((void *)(vaddr))
+static inline void *__va(unsigned long paddr)
+{
+ void *vaddr;
+ asm (
+ "1: subl #0,%0\n"
+ m68k_fixup(%c2, 1b+2)
+ : "=r" (vaddr)
+ : "0" (paddr), "i" (m68k_fixup_memoffset));
+ return vaddr;
+}
+
+#else /* !CONFIG_SUN3 */
+/* This #define is a horrible hack to suppress lots of warnings. --m */
+#define __pa(x) ___pa((unsigned long)(x))
+static inline unsigned long ___pa(unsigned long x)
+{
+ if(x == 0)
+ return 0;
+ if(x >= PAGE_OFFSET)
+ return (x-PAGE_OFFSET);
+ else
+ return (x+0x2000000);
+}
+
+static inline void *__va(unsigned long x)
+{
+ if(x == 0)
+ return (void *)0;
+
+ if(x < 0x2000000)
+ return (void *)(x+PAGE_OFFSET);
+ else
+ return (void *)(x-0x2000000);
+}
+#endif /* CONFIG_SUN3 */
+
+/*
+ * NOTE: virtual isn't really correct, actually it should be the offset into the
+ * memory node, but we have no highmem, so that works for now.
+ * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
+ * of the shifts unnecessary.
+ */
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
+
+extern int m68k_virt_to_node_shift;
+
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+#define __virt_to_node(addr) (&pg_data_map[0])
+#else
+extern struct pglist_data *pg_data_table[];
+
+static inline __attribute_const__ int __virt_to_node_shift(void)
+{
+ int shift;
+
+ asm (
+ "1: moveq #0,%0\n"
+ m68k_fixup(%c1, 1b)
+ : "=d" (shift)
+ : "i" (m68k_fixup_vnode_shift));
+ return shift;
+}
+
+#define __virt_to_node(addr) (pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()])
+#endif
+
+#define virt_to_page(addr) ({ \
+ pfn_to_page(virt_to_pfn(addr)); \
+})
+#define page_to_virt(page) ({ \
+ pfn_to_virt(page_to_pfn(page)); \
+})
+
+#define pfn_to_page(pfn) ({ \
+ unsigned long __pfn = (pfn); \
+ struct pglist_data *pgdat; \
+ pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn)); \
+ pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \
+})
+#define page_to_pfn(_page) ({ \
+ struct page *__p = (_page); \
+ struct pglist_data *pgdat; \
+ pgdat = &pg_data_map[page_to_nid(__p)]; \
+ ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \
+})
+
+#define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
+#define pfn_valid(pfn) virt_addr_valid(pfn_to_virt(pfn))
+
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+
+#endif /* _M68K_PAGE_H */
--- /dev/null
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT (12)
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+ alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((&x)->pmd[0])
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+ ((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/page.h>
+
+#endif /* _M68KNOMMU_PAGE_H */
--- /dev/null
+#ifdef __uClinux__
+#include "page_offset_no.h"
+#else
+#include "page_offset_mm.h"
+#endif
--- /dev/null
+
+/* This handles the memory map.. */
+#ifndef CONFIG_SUN3
+#define PAGE_OFFSET_RAW 0x00000000
+#else
+#define PAGE_OFFSET_RAW 0x0E000000
+#endif
+
--- /dev/null
+
+
+/* This handles the memory map.. */
+#define PAGE_OFFSET_RAW CONFIG_RAMBASE
+
--- /dev/null
+#ifdef __uClinux__
+#include "param_no.h"
+#else
+#include "param_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_PARAM_H
+#define _M68K_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
+# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 8192
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _M68K_PARAM_H */
--- /dev/null
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ HZ
+#define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */
--- /dev/null
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ *
+ * RZ: for use with Q40 and other ISA machines
+ */
+
+#ifndef _ASM_M68K_PARPORT_H
+#define _ASM_M68K_PARPORT_H 1
+
+#define insl(port,buf,len) isa_insb(port,buf,(len)<<2)
+#define outsl(port,buf,len) isa_outsb(port,buf,(len)<<2)
+
+/* no dma, or IRQ autoprobing */
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+ if (! (MACH_IS_Q40))
+ return 0; /* count=0 */
+ return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE);
+}
+
+#endif /* !(_ASM_M68K_PARPORT_H) */
--- /dev/null
+#ifdef __uClinux__
+#include "pci_no.h"
+#else
+#include "pci_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_M68K_PCI_H
+#define _ASM_M68K_PCI_H
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+#endif /* _ASM_M68K_PCI_H */
--- /dev/null
+#ifndef M68KNOMMU_PCI_H
+#define M68KNOMMU_PCI_H
+
+#include <asm/pci_mm.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ * These are pretty much arbitary with the CoMEM implementation.
+ * We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x00010000
+
+#define pcibios_scan_all_fns(a, b) 0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly. For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+ return 1;
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */
--- /dev/null
+#ifndef __ASM_M68K_PERCPU_H
+#define __ASM_M68K_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_M68K_PERCPU_H */
--- /dev/null
+#ifdef __uClinux__
+#include "pgalloc_no.h"
+#else
+#include "pgalloc_mm.h"
+#endif
--- /dev/null
+
+#ifndef M68K_PGALLOC_H
+#define M68K_PGALLOC_H
+
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3_pgalloc.h>
+#else
+#include <asm/motorola_pgalloc.h>
+#endif
+
+extern void m68k_setup_node(int node);
+
+#endif /* M68K_PGALLOC_H */
--- /dev/null
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */
--- /dev/null
+#ifdef __uClinux__
+#include "pgtable_no.h"
+#else
+#include "pgtable_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_PGTABLE_H
+#define _M68K_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the m68k page table tree.
+ */
+
+#include <asm/virtconvert.h>
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) \
+ do{ \
+ *(pteptr) = (pteval); \
+ } while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#ifdef CONFIG_SUN3
+#define PMD_SHIFT 17
+#else
+#define PMD_SHIFT 22
+#endif
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#ifdef CONFIG_SUN3
+#define PGDIR_SHIFT 17
+#else
+#define PGDIR_SHIFT 25
+#endif
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the m68k is configured as three-level,
+ * so we do have PMD level physically.
+ */
+#ifdef CONFIG_SUN3
+#define PTRS_PER_PTE 16
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD 2048
+#else
+#define PTRS_PER_PTE 1024
+#define PTRS_PER_PMD 8
+#define PTRS_PER_PGD 128
+#endif
+#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+/* Virtual address region for use by kernel_map() */
+#ifdef CONFIG_SUN3
+#define KMAP_START 0x0DC00000
+#define KMAP_END 0x0E000000
+#else
+#define KMAP_START 0xd0000000
+#define KMAP_END 0xf0000000
+#endif
+
+#ifndef CONFIG_SUN3
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET (8*1024*1024)
+#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END KMAP_START
+#else
+extern unsigned long vmalloc_end;
+#define VMALLOC_START 0x0f800000
+#define VMALLOC_END vmalloc_end
+#endif /* CONFIG_SUN3 */
+
+/* zero page used for uninitialized stuff */
+extern void *empty_zero_page;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR (8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK (~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware! SRB. */
+#define SIZEOF_PTR_LOG2 2
+
+extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
+
+/*
+ * The m68k doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information. The Sun3 does, but
+ * they are updated on demand.
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t pte)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/* MMU-specific headers */
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3_pgtable.h>
+#else
+#include <asm/motorola_pgtable.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#ifdef SUN3_PAGE_NOCACHE
+# define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE
+#else
+# define __SUN3_PAGE_NOCACHE 0
+#endif
+#define pgprot_noncached(prot) \
+ (MMU_IS_SUN3 \
+ ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE)) \
+ : ((MMU_IS_851 || MMU_IS_030) \
+ ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030)) \
+ : (MMU_IS_040 || MMU_IS_060) \
+ ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
+ : (prot)))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _M68K_PGTABLE_H */
--- /dev/null
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd) (1)
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *)0)
+
+#define PAGE_NONE __pgprot(0)
+#define PAGE_SHARED __pgprot(0)
+#define PAGE_COPY __pgprot(0)
+#define PAGE_READONLY __pgprot(0)
+#define PAGE_KERNEL __pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _M68KNOMMU_PGTABLE_H */
--- /dev/null
+#ifndef __m68k_POLL_H
+#define __m68k_POLL_H
+
+#define POLLWRNORM POLLOUT
+#define POLLWRBAND 256
+
+#include <asm-generic/poll.h>
+
+#endif
--- /dev/null
+#ifndef __ARCH_M68K_POSIX_TYPES_H
+#define __ARCH_M68K_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) */
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "processor_no.h"
+#else
+#include "processor_mm.h"
+#endif
--- /dev/null
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/thread_info.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long rdusp(void)
+{
+ unsigned long usp;
+
+ __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+ return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+ __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_SIZE (0xF0000000UL)
+#else
+#define TASK_SIZE (0x0E000000UL)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_UNMAPPED_BASE 0xC0000000UL
+#else
+#define TASK_UNMAPPED_BASE 0x0A000000UL
+#endif
+#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned short sr; /* saved status register */
+ unsigned short fs; /* saved fs (sfc, dfc) */
+ unsigned long crp[2]; /* cpu root pointer */
+ unsigned long esp0; /* points to SR of stack frame */
+ unsigned long faddr; /* info about last fault */
+ int signo, code;
+ unsigned long fp[8*3];
+ unsigned long fpcntl[3]; /* fp control regs */
+ unsigned char fpstate[FPSTATESIZE]; /* floating point state */
+ struct thread_info info;
+};
+
+#define INIT_THREAD { \
+ .ksp = sizeof(init_stack) + (unsigned long) init_stack, \
+ .sr = PS_S, \
+ .fs = __KERNEL_DS, \
+ .info = INIT_THREAD_INFO(init_task), \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+ unsigned long usp)
+{
+ /* reads from user space */
+ set_fs(USER_DS);
+
+ regs->pc = pc;
+ regs->sr &= ~0x2000;
+ wrusp(usp);
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ (virt_addr_valid((tsk)->thread.esp0))) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+
+#endif
--- /dev/null
+/*
+ * include/asm-m68knommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+ extern unsigned int sw_usp;
+ return(sw_usp);
+#else
+ unsigned long usp;
+ __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+ return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+ extern unsigned int sw_usp;
+ sw_usp = usp;
+#else
+ __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE (0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE 0
+
+/*
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned short sr; /* saved status register */
+ unsigned short fs; /* saved fs (sfc, dfc) */
+ unsigned long crp[2]; /* cpu root pointer */
+ unsigned long esp0; /* points to SR of stack frame */
+ unsigned long fp[8*3];
+ unsigned long fpcntl[3]; /* fp control regs */
+ unsigned char fpstate[FPSTATESIZE]; /* floating point state */
+};
+
+#define INIT_THREAD { \
+ sizeof(init_stack) + (unsigned long) init_stack, 0, \
+ PS_S, __KERNEL_DS, \
+ {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
+#else
+#define reformat(_regs) do { } while (0)
+#endif
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ set_fs(USER_DS); /* reads from user space */ \
+ (_regs)->pc = (_pc); \
+ ((struct switch_stack *)(_regs))[-1].a6 = 0; \
+ reformat(_regs); \
+ if (current->mm) \
+ (_regs)->d5 = current->mm->start_data; \
+ (_regs)->sr &= ~0x2000; \
+ wrusp(_usp); \
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ (virt_addr_valid((tsk)->thread.esp0))) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "ptrace_no.h"
+#else
+#include "ptrace_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1 0
+#define PT_D2 1
+#define PT_D3 2
+#define PT_D4 3
+#define PT_D5 4
+#define PT_D6 5
+#define PT_D7 6
+#define PT_A0 7
+#define PT_A1 8
+#define PT_A2 9
+#define PT_A3 10
+#define PT_A4 11
+#define PT_A5 12
+#define PT_A6 13
+#define PT_D0 14
+#define PT_USP 15
+#define PT_ORIG_D0 16
+#define PT_SR 17
+#define PT_PC 18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long d1;
+ long d2;
+ long d3;
+ long d4;
+ long d5;
+ long a0;
+ long a1;
+ long a2;
+ long d0;
+ long orig_d0;
+ long stkadj;
+ unsigned short sr;
+ unsigned long pc;
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long d6;
+ unsigned long d7;
+ unsigned long a3;
+ unsigned long a4;
+ unsigned long a5;
+ unsigned long a6;
+ unsigned long retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
--- /dev/null
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1 0
+#define PT_D2 1
+#define PT_D3 2
+#define PT_D4 3
+#define PT_D5 4
+#define PT_D6 5
+#define PT_D7 6
+#define PT_A0 7
+#define PT_A1 8
+#define PT_A2 9
+#define PT_A3 10
+#define PT_A4 11
+#define PT_A5 12
+#define PT_A6 13
+#define PT_D0 14
+#define PT_USP 15
+#define PT_ORIG_D0 16
+#define PT_SR 17
+#define PT_PC 18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long d1;
+ long d2;
+ long d3;
+ long d4;
+ long d5;
+ long a0;
+ long a1;
+ long a2;
+ long d0;
+ long orig_d0;
+ long stkadj;
+#ifdef CONFIG_COLDFIRE
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+ unsigned short sr;
+ unsigned long pc;
+#else
+ unsigned short sr;
+ unsigned long pc;
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long d6;
+ unsigned long d7;
+ unsigned long a3;
+ unsigned long a4;
+ unsigned long a5;
+ unsigned long a6;
+ unsigned long retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
--- /dev/null
+/*
+ * Q40 master Chip Control
+ * RTC stuff merged for compactnes..
+*/
+
+#ifndef _Q40_MASTER_H
+#define _Q40_MASTER_H
+
+#include <asm/raw_io.h>
+
+
+#define q40_master_addr 0xff000000
+
+#define IIRQ_REG 0x0 /* internal IRQ reg */
+#define EIRQ_REG 0x4 /* external ... */
+#define KEYCODE_REG 0x1c /* value of received scancode */
+#define DISPLAY_CONTROL_REG 0x18
+#define FRAME_CLEAR_REG 0x24
+#define LED_REG 0x30
+
+#define Q40_LED_ON() master_outb(1,LED_REG)
+#define Q40_LED_OFF() master_outb(0,LED_REG)
+
+#define INTERRUPT_REG IIRQ_REG /* "native" ints */
+#define KEY_IRQ_ENABLE_REG 0x08 /**/
+#define KEYBOARD_UNLOCK_REG 0x20 /* clear kb int */
+
+#define SAMPLE_ENABLE_REG 0x14 /* generate SAMPLE ints */
+#define SAMPLE_RATE_REG 0x2c
+#define SAMPLE_CLEAR_REG 0x28
+#define SAMPLE_LOW 0x00
+#define SAMPLE_HIGH 0x01
+
+#define FRAME_RATE_REG 0x38 /* generate FRAME ints at 200 HZ rate */
+
+#if 0
+#define SER_ENABLE_REG 0x0c /* allow serial ints to be generated */
+#endif
+#define EXT_ENABLE_REG 0x10 /* ... rest of the ISA ints ... */
+
+
+#define master_inb(_reg_) in_8((unsigned char *)q40_master_addr+_reg_)
+#define master_outb(_b_,_reg_) out_8((unsigned char *)q40_master_addr+_reg_,_b_)
+
+/* RTC defines */
+
+#define Q40_RTC_BASE (0xff021ffc)
+
+#define Q40_RTC_YEAR (*(volatile unsigned char *)(Q40_RTC_BASE+0))
+#define Q40_RTC_MNTH (*(volatile unsigned char *)(Q40_RTC_BASE-4))
+#define Q40_RTC_DATE (*(volatile unsigned char *)(Q40_RTC_BASE-8))
+#define Q40_RTC_DOW (*(volatile unsigned char *)(Q40_RTC_BASE-12))
+#define Q40_RTC_HOUR (*(volatile unsigned char *)(Q40_RTC_BASE-16))
+#define Q40_RTC_MINS (*(volatile unsigned char *)(Q40_RTC_BASE-20))
+#define Q40_RTC_SECS (*(volatile unsigned char *)(Q40_RTC_BASE-24))
+#define Q40_RTC_CTRL (*(volatile unsigned char *)(Q40_RTC_BASE-28))
+
+/* some control bits */
+#define Q40_RTC_READ 64 /* prepare for reading */
+#define Q40_RTC_WRITE 128
+
+/* define some Q40 specific ints */
+#include "q40ints.h"
+
+/* misc defs */
+#define DAC_LEFT ((unsigned char *)0xff008000)
+#define DAC_RIGHT ((unsigned char *)0xff008004)
+
+#endif /* _Q40_MASTER_H */
--- /dev/null
+/*
+ * contains some Q40 related interrupt definitions
+ */
+
+#define Q40_IRQ_MAX (34)
+
+#define Q40_IRQ_SAMPLE (34)
+#define Q40_IRQ_KEYBOARD (32)
+#define Q40_IRQ_FRAME (33)
+
+
+/* masks for interrupt regiosters*/
+/* internal, IIRQ_REG */
+#define Q40_IRQ_KEYB_MASK (2)
+#define Q40_IRQ_SER_MASK (1<<2)
+#define Q40_IRQ_FRAME_MASK (1<<3)
+#define Q40_IRQ_EXT_MASK (1<<4) /* is a EIRQ */
+/* eirq, EIRQ_REG */
+#define Q40_IRQ3_MASK (1)
+#define Q40_IRQ4_MASK (1<<1)
+#define Q40_IRQ5_MASK (1<<2)
+#define Q40_IRQ6_MASK (1<<3)
+#define Q40_IRQ7_MASK (1<<4)
+#define Q40_IRQ10_MASK (1<<5)
+#define Q40_IRQ14_MASK (1<<6)
+#define Q40_IRQ15_MASK (1<<7)
+
+extern unsigned long q40_probe_irq_on (void);
+extern int q40_probe_irq_off (unsigned long irqs);
--- /dev/null
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0 0
+#define GLB_SCC_1 1
+#define GLB_SCC_2 2
+#define GLB_SCC_3 3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr;
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short IntrDis(void);
+void IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif
--- /dev/null
+/*
+ * linux/include/asm-m68k/raw_io.h
+ *
+ * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace
+ *
+ */
+
+#ifndef _RAW_IO_H
+#define _RAW_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm/types.h>
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void iounmap(void __iomem *addr);
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
+ int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesirable for some devices.
+ */
+#define in_8(addr) \
+ ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
+#define in_be16(addr) \
+ ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
+#define in_be32(addr) \
+ ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
+#define in_le16(addr) \
+ ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
+#define in_le32(addr) \
+ ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
+
+#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
+#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
+#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
+#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
+#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
+
+#define raw_inb in_8
+#define raw_inw in_be16
+#define raw_inl in_be32
+#define __raw_readb in_8
+#define __raw_readw in_be16
+#define __raw_readl in_be32
+
+#define raw_outb(val,port) out_8((port),(val))
+#define raw_outw(val,port) out_be16((port),(val))
+#define raw_outl(val,port) out_be32((port),(val))
+#define __raw_writeb(val,addr) out_8((addr),(val))
+#define __raw_writew(val,addr) out_be16((addr),(val))
+#define __raw_writel(val,addr) out_be32((addr),(val))
+
+static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
+{
+ unsigned int i;
+
+ for (i = 0; i < len; i++)
+ *buf++ = in_8(port);
+}
+
+static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf,
+ unsigned int len)
+{
+ unsigned int i;
+
+ for (i = 0; i < len; i++)
+ out_8(port, *buf++);
+}
+
+static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr)
+{
+ unsigned int tmp;
+
+ if (nr & 15) {
+ tmp = (nr & 15) - 1;
+ asm volatile (
+ "1: movew %2@,%0@+; dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+ if (nr >> 4) {
+ tmp = (nr >> 4) - 1;
+ asm volatile (
+ "1: "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "movew %2@,%0@+; "
+ "dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+}
+
+static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf,
+ unsigned int nr)
+{
+ unsigned int tmp;
+
+ if (nr & 15) {
+ tmp = (nr & 15) - 1;
+ asm volatile (
+ "1: movew %0@+,%2@; dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+ if (nr >> 4) {
+ tmp = (nr >> 4) - 1;
+ asm volatile (
+ "1: "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "movew %0@+,%2@; "
+ "dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+}
+
+static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr)
+{
+ unsigned int tmp;
+
+ if (nr & 15) {
+ tmp = (nr & 15) - 1;
+ asm volatile (
+ "1: movel %2@,%0@+; dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+ if (nr >> 4) {
+ tmp = (nr >> 4) - 1;
+ asm volatile (
+ "1: "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "movel %2@,%0@+; "
+ "dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+}
+
+static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf,
+ unsigned int nr)
+{
+ unsigned int tmp;
+
+ if (nr & 15) {
+ tmp = (nr & 15) - 1;
+ asm volatile (
+ "1: movel %0@+,%2@; dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+ if (nr >> 4) {
+ tmp = (nr >> 4) - 1;
+ asm volatile (
+ "1: "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "movel %0@+,%2@; "
+ "dbra %1,1b"
+ : "=a" (buf), "=d" (tmp)
+ : "a" (port), "0" (buf),
+ "1" (tmp));
+ }
+}
+
+
+static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf,
+ unsigned int nr)
+{
+ if ((nr) % 8)
+ __asm__ __volatile__
+ ("\tmovel %0,%/a0\n\t"
+ "movel %1,%/a1\n\t"
+ "movel %2,%/d6\n\t"
+ "subql #1,%/d6\n"
+ "1:\tmovew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "dbra %/d6,1b"
+ :
+ : "g" (port), "g" (buf), "g" (nr)
+ : "d0", "a0", "a1", "d6");
+ else
+ __asm__ __volatile__
+ ("movel %0,%/a0\n\t"
+ "movel %1,%/a1\n\t"
+ "movel %2,%/d6\n\t"
+ "lsrl #3,%/d6\n\t"
+ "subql #1,%/d6\n"
+ "1:\tmovew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "movew %/a0@,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a1@+\n\t"
+ "dbra %/d6,1b"
+ :
+ : "g" (port), "g" (buf), "g" (nr)
+ : "d0", "a0", "a1", "d6");
+}
+
+static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
+ unsigned int nr)
+{
+ if ((nr) % 8)
+ __asm__ __volatile__
+ ("movel %0,%/a0\n\t"
+ "movel %1,%/a1\n\t"
+ "movel %2,%/d6\n\t"
+ "subql #1,%/d6\n"
+ "1:\tmovew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "dbra %/d6,1b"
+ :
+ : "g" (port), "g" (buf), "g" (nr)
+ : "d0", "a0", "a1", "d6");
+ else
+ __asm__ __volatile__
+ ("movel %0,%/a0\n\t"
+ "movel %1,%/a1\n\t"
+ "movel %2,%/d6\n\t"
+ "lsrl #3,%/d6\n\t"
+ "subql #1,%/d6\n"
+ "1:\tmovew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "movew %/a1@+,%/d0\n\t"
+ "rolw #8,%/d0\n\t"
+ "movew %/d0,%/a0@\n\t"
+ "dbra %/d6,1b"
+ :
+ : "g" (port), "g" (buf), "g" (nr)
+ : "d0", "a0", "a1", "d6");
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _RAW_IO_H */
--- /dev/null
+#ifndef _M68K_RESOURCE_H
+#define _M68K_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _M68K_RESOURCE_H */
--- /dev/null
+/* include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+
+#define RTC_PIE 0x40 /* periodic interrupt enable */
+#define RTC_AIE 0x20 /* alarm interrupt enable */
+#define RTC_UIE 0x10 /* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100 /* battery bad */
+#define RTC_SQWE 0x08 /* enable square-wave output */
+#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
+#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+ /*
+ * Only the values that we read from the RTC are set. We leave
+ * tm_wday, tm_yday and tm_isdst untouched. Even though the
+ * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+ * by the RTC when initially set to a non-zero value.
+ */
+ mach_hwclk(0, time);
+ return RTC_24H;
+}
+
+static inline int set_rtc_time(struct rtc_time *time)
+{
+ return mach_hwclk(1, time);
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+ if (mach_get_ss)
+ return mach_get_ss();
+ else{
+ struct rtc_time h;
+
+ get_rtc_time(&h);
+ return h.tm_sec;
+ }
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+ if (mach_get_rtc_pll)
+ return mach_get_rtc_pll(pll);
+ else
+ return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+ if (mach_set_rtc_pll)
+ return mach_set_rtc_pll(pll);
+ else
+ return -EINVAL;
+}
+#endif /* __KERNEL__ */
+
+#endif /* _ASM__RTC_H */
--- /dev/null
+/*
+ * some sbus structures and macros to make usage of sbus drivers possible
+ */
+
+#ifndef __M68K_SBUS_H
+#define __M68K_SBUS_H
+
+struct sbus_dev {
+ struct {
+ unsigned int which_io;
+ unsigned int phys_addr;
+ } reg_addrs[1];
+};
+
+/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
+/* No SBUS on the Sun3, kludge -- sam */
+
+static inline void _sbus_writeb(unsigned char val, unsigned long addr)
+{
+ *(volatile unsigned char *)addr = val;
+}
+
+static inline unsigned char _sbus_readb(unsigned long addr)
+{
+ return *(volatile unsigned char *)addr;
+}
+
+static inline void _sbus_writel(unsigned long val, unsigned long addr)
+{
+ *(volatile unsigned long *)addr = val;
+
+}
+
+extern inline unsigned long _sbus_readl(unsigned long addr)
+{
+ return *(volatile unsigned long *)addr;
+}
+
+
+#define sbus_readb(a) _sbus_readb((unsigned long)a)
+#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
+#define sbus_readl(a) _sbus_readl((unsigned long)a)
+#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "scatterlist_no.h"
+#else
+#include "scatterlist_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_SCATTERLIST_H
+#define _M68K_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset;
+ unsigned int length;
+
+ __u32 dma_address; /* A place to hang host-specific addresses at. */
+};
+
+/* This is bogus and should go away. */
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#endif /* !(_M68K_SCATTERLIST_H) */
--- /dev/null
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
--- /dev/null
+#ifndef _ASM_M68K_SECTIONS_H
+#define _ASM_M68K_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_M68K_SECTIONS_H */
--- /dev/null
+#ifdef __uClinux__
+#include "segment_no.h"
+#else
+#include "segment_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ mm_segment_t _v;
+ __asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
+
+ return _v;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+ __asm__ __volatile__ ("movec %0,%/sfc\n\t"
+ "movec %0,%/dfc\n\t"
+ : /* no outputs */ : "r" (val.seg) : "memory");
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
--- /dev/null
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
--- /dev/null
+#ifndef _M68K_SEMBUF_H
+#define _M68K_SEMBUF_H
+
+/*
+ * The semid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _M68K_SEMBUF_H */
--- /dev/null
+/*
+ * include/asm-m68k/serial.h
+ *
+ * currently this seems useful only for a Q40,
+ * it's an almost exact copy of ../asm-alpha/serial.h
+ *
+ */
+
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
+ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
+ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
--- /dev/null
+#ifdef __uClinux__
+#include "setup_no.h"
+#else
+#include "setup_mm.h"
+#endif
--- /dev/null
+/*
+** asm/setup.h -- Definition of the Linux/m68k setup information
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+** Added bi_atari part of the machine dependent union bi_un; for now it
+** contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+** Renamed to setup.h; added some useful macros to allow gcc some
+** optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+** Redesign of the boot information structure; moved boot information
+** structure to bootinfo.h
+*/
+
+#ifndef _M68K_SETUP_H
+#define _M68K_SETUP_H
+
+
+
+ /*
+ * Linux/m68k Architectures
+ */
+
+#define MACH_AMIGA 1
+#define MACH_ATARI 2
+#define MACH_MAC 3
+#define MACH_APOLLO 4
+#define MACH_SUN3 5
+#define MACH_MVME147 6
+#define MACH_MVME16x 7
+#define MACH_BVME6000 8
+#define MACH_HP300 9
+#define MACH_Q40 10
+#define MACH_SUN3X 11
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+#define CL_SIZE COMMAND_LINE_SIZE
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_machtype;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_AMIGA)
+# define MACH_IS_AMIGA (0)
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
+#else
+# define MACH_AMIGA_ONLY
+# define MACH_IS_AMIGA (1)
+# define MACH_TYPE (MACH_AMIGA)
+#endif
+
+#if !defined(CONFIG_ATARI)
+# define MACH_IS_ATARI (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
+#else
+# define MACH_ATARI_ONLY
+# define MACH_IS_ATARI (1)
+# define MACH_TYPE (MACH_ATARI)
+#endif
+
+#if !defined(CONFIG_MAC)
+# define MACH_IS_MAC (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_MAC (m68k_machtype == MACH_MAC)
+#else
+# define MACH_MAC_ONLY
+# define MACH_IS_MAC (1)
+# define MACH_TYPE (MACH_MAC)
+#endif
+
+#if defined(CONFIG_SUN3)
+#define MACH_IS_SUN3 (1)
+#define MACH_SUN3_ONLY (1)
+#define MACH_TYPE (MACH_SUN3)
+#else
+#define MACH_IS_SUN3 (0)
+#endif
+
+#if !defined (CONFIG_APOLLO)
+# define MACH_IS_APOLLO (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
+#else
+# define MACH_APOLLO_ONLY
+# define MACH_IS_APOLLO (1)
+# define MACH_TYPE (MACH_APOLLO)
+#endif
+
+#if !defined (CONFIG_MVME147)
+# define MACH_IS_MVME147 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
+#else
+# define MACH_MVME147_ONLY
+# define MACH_IS_MVME147 (1)
+# define MACH_TYPE (MACH_MVME147)
+#endif
+
+#if !defined (CONFIG_MVME16x)
+# define MACH_IS_MVME16x (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
+#else
+# define MACH_MVME16x_ONLY
+# define MACH_IS_MVME16x (1)
+# define MACH_TYPE (MACH_MVME16x)
+#endif
+
+#if !defined (CONFIG_BVME6000)
+# define MACH_IS_BVME6000 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
+#else
+# define MACH_BVME6000_ONLY
+# define MACH_IS_BVME6000 (1)
+# define MACH_TYPE (MACH_BVME6000)
+#endif
+
+#if !defined (CONFIG_HP300)
+# define MACH_IS_HP300 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
+#else
+# define MACH_HP300_ONLY
+# define MACH_IS_HP300 (1)
+# define MACH_TYPE (MACH_HP300)
+#endif
+
+#if !defined (CONFIG_Q40)
+# define MACH_IS_Q40 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
+#else
+# define MACH_Q40_ONLY
+# define MACH_IS_Q40 (1)
+# define MACH_TYPE (MACH_Q40)
+#endif
+
+#if !defined (CONFIG_SUN3X)
+# define MACH_IS_SUN3X (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
+ || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
+#else
+# define CONFIG_SUN3X_ONLY
+# define MACH_IS_SUN3X (1)
+# define MACH_TYPE (MACH_SUN3X)
+#endif
+
+#ifndef MACH_TYPE
+# define MACH_TYPE (m68k_machtype)
+#endif
+
+#endif /* __KERNEL__ */
+
+
+ /*
+ * CPU, FPU and MMU types
+ *
+ * Note: we may rely on the following equalities:
+ *
+ * CPU_68020 == MMU_68851
+ * CPU_68030 == MMU_68030
+ * CPU_68040 == FPU_68040 == MMU_68040
+ * CPU_68060 == FPU_68060 == MMU_68060
+ */
+
+#define CPUB_68020 0
+#define CPUB_68030 1
+#define CPUB_68040 2
+#define CPUB_68060 3
+
+#define CPU_68020 (1<<CPUB_68020)
+#define CPU_68030 (1<<CPUB_68030)
+#define CPU_68040 (1<<CPUB_68040)
+#define CPU_68060 (1<<CPUB_68060)
+
+#define FPUB_68881 0
+#define FPUB_68882 1
+#define FPUB_68040 2 /* Internal FPU */
+#define FPUB_68060 3 /* Internal FPU */
+#define FPUB_SUNFPA 4 /* Sun-3 FPA */
+
+#define FPU_68881 (1<<FPUB_68881)
+#define FPU_68882 (1<<FPUB_68882)
+#define FPU_68040 (1<<FPUB_68040)
+#define FPU_68060 (1<<FPUB_68060)
+#define FPU_SUNFPA (1<<FPUB_SUNFPA)
+
+#define MMUB_68851 0
+#define MMUB_68030 1 /* Internal MMU */
+#define MMUB_68040 2 /* Internal MMU */
+#define MMUB_68060 3 /* Internal MMU */
+#define MMUB_APOLLO 4 /* Custom Apollo */
+#define MMUB_SUN3 5 /* Custom Sun-3 */
+
+#define MMU_68851 (1<<MMUB_68851)
+#define MMU_68030 (1<<MMUB_68030)
+#define MMU_68040 (1<<MMUB_68040)
+#define MMU_68060 (1<<MMUB_68060)
+#define MMU_SUN3 (1<<MMUB_SUN3)
+#define MMU_APOLLO (1<<MMUB_APOLLO)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_cputype;
+extern unsigned long m68k_fputype;
+extern unsigned long m68k_mmutype;
+#ifdef CONFIG_VME
+extern unsigned long vme_brdtype;
+#endif
+
+ /*
+ * m68k_is040or060 is != 0 for a '040 or higher;
+ * used numbers are 4 for 68040 and 6 for 68060.
+ */
+
+extern int m68k_is040or060;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_M68020)
+# define CPU_IS_020 (0)
+# define MMU_IS_851 (0)
+# define MMU_IS_SUN3 (0)
+#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+# define CPU_IS_020 (m68k_cputype & CPU_68020)
+# define MMU_IS_851 (m68k_mmutype & MMU_68851)
+# define MMU_IS_SUN3 (0) /* Sun3 not supported with other CPU enabled */
+#else
+# define CPU_M68020_ONLY
+# define CPU_IS_020 (1)
+#ifdef MACH_SUN3_ONLY
+# define MMU_IS_SUN3 (1)
+# define MMU_IS_851 (0)
+#else
+# define MMU_IS_SUN3 (0)
+# define MMU_IS_851 (1)
+#endif
+#endif
+
+#if !defined(CONFIG_M68030)
+# define CPU_IS_030 (0)
+# define MMU_IS_030 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+# define CPU_IS_030 (m68k_cputype & CPU_68030)
+# define MMU_IS_030 (m68k_mmutype & MMU_68030)
+#else
+# define CPU_M68030_ONLY
+# define CPU_IS_030 (1)
+# define MMU_IS_030 (1)
+#endif
+
+#if !defined(CONFIG_M68040)
+# define CPU_IS_040 (0)
+# define MMU_IS_040 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
+# define CPU_IS_040 (m68k_cputype & CPU_68040)
+# define MMU_IS_040 (m68k_mmutype & MMU_68040)
+#else
+# define CPU_M68040_ONLY
+# define CPU_IS_040 (1)
+# define MMU_IS_040 (1)
+#endif
+
+#if !defined(CONFIG_M68060)
+# define CPU_IS_060 (0)
+# define MMU_IS_060 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
+# define CPU_IS_060 (m68k_cputype & CPU_68060)
+# define MMU_IS_060 (m68k_mmutype & MMU_68060)
+#else
+# define CPU_M68060_ONLY
+# define CPU_IS_060 (1)
+# define MMU_IS_060 (1)
+#endif
+
+#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
+# define CPU_IS_020_OR_030 (0)
+#else
+# define CPU_M68020_OR_M68030
+# if defined(CONFIG_M68040) || defined(CONFIG_M68060)
+# define CPU_IS_020_OR_030 (!m68k_is040or060)
+# else
+# define CPU_M68020_OR_M68030_ONLY
+# define CPU_IS_020_OR_030 (1)
+# endif
+#endif
+
+#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
+# define CPU_IS_040_OR_060 (0)
+#else
+# define CPU_M68040_OR_M68060
+# if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+# define CPU_IS_040_OR_060 (m68k_is040or060)
+# else
+# define CPU_M68040_OR_M68060_ONLY
+# define CPU_IS_040_OR_060 (1)
+# endif
+#endif
+
+#define CPU_TYPE (m68k_cputype)
+
+#ifdef CONFIG_M68KFPU_EMU
+# ifdef CONFIG_M68KFPU_EMU_ONLY
+# define FPU_IS_EMU (1)
+# else
+# define FPU_IS_EMU (!m68k_fputype)
+# endif
+#else
+# define FPU_IS_EMU (0)
+#endif
+
+
+ /*
+ * Miscellaneous
+ */
+
+#define NUM_MEMINFO 4
+
+#ifndef __ASSEMBLY__
+struct mem_info {
+ unsigned long addr; /* physical address of memory chunk */
+ unsigned long size; /* length of memory chunk (in bytes) */
+};
+
+extern int m68k_num_memory; /* # of memory blocks found (and used) */
+extern int m68k_realnum_memory; /* real # of memory blocks found */
+extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SETUP_H */
--- /dev/null
+#ifdef __KERNEL__
+
+#include <asm/setup_mm.h>
+
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+
+#endif /* __KERNEL__ */
+
+#define COMMAND_LINE_SIZE 512
--- /dev/null
+#ifndef _M68K_SHM_H
+#define _M68K_SHM_H
+
+
+/* format of page table entries that correspond to shared memory pages
+ currently out in swap space (see also mm/swap.c):
+ bits 0-1 (PAGE_PRESENT) is = 0
+ bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
+ bits 31..9 are used like this:
+ bits 15..9 (SHM_ID) the id of the shared memory segment
+ bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
+ (actually only bits 25..16 get used since SHMMAX is so low)
+ bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
+*/
+/* on the m68k both bits 0 and 1 must be zero */
+/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
+ others are reduced by 2. --m */
+
+#ifndef CONFIG_SUN3
+#define SHM_ID_SHIFT 9
+#else
+#define SHM_ID_SHIFT 7
+#endif
+#define _SHM_ID_BITS 7
+#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
+
+#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
+#define _SHM_IDX_BITS 15
+#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
+
+#endif /* _M68K_SHM_H */
--- /dev/null
+#ifndef _M68K_SHMBUF_H
+#define _M68K_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _M68K_SHMBUF_H */
--- /dev/null
+#ifndef _M68K_SHMPARAM_H
+#define _M68K_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _M68K_SHMPARAM_H */
--- /dev/null
+#ifdef __uClinux__
+#include "sigcontext_no.h"
+#else
+#include "sigcontext_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_M68k_SIGCONTEXT_H
+#define _ASM_M68k_SIGCONTEXT_H
+
+struct sigcontext {
+ unsigned long sc_mask; /* old sigmask */
+ unsigned long sc_usp; /* old user stack pointer */
+ unsigned long sc_d0;
+ unsigned long sc_d1;
+ unsigned long sc_a0;
+ unsigned long sc_a1;
+ unsigned short sc_sr;
+ unsigned long sc_pc;
+ unsigned short sc_formatvec;
+ unsigned long sc_fpregs[2*3]; /* room for two fp registers */
+ unsigned long sc_fpcntl[3];
+ unsigned char sc_fpstate[216];
+};
+
+#endif
--- /dev/null
+#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
+#define _ASM_M68KNOMMU_SIGCONTEXT_H
+
+struct sigcontext {
+ unsigned long sc_mask; /* old sigmask */
+ unsigned long sc_usp; /* old user stack pointer */
+ unsigned long sc_d0;
+ unsigned long sc_d1;
+ unsigned long sc_a0;
+ unsigned long sc_a1;
+ unsigned long sc_a5;
+ unsigned short sc_sr;
+ unsigned long sc_pc;
+ unsigned short sc_formatvec;
+};
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "siginfo_no.h"
+#else
+#include "siginfo_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_SIGINFO_H
+#define _M68K_SIGINFO_H
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+ int si_signo;
+ int si_errno;
+ int si_code;
+
+ union {
+ int _pad[SI_PAD_SIZE];
+
+ /* kill() */
+ struct {
+ __kernel_pid_t _pid; /* sender's pid */
+ __kernel_uid_t _uid; /* backwards compatibility */
+ __kernel_uid32_t _uid32; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+ sigval_t _sigval; /* same as below */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ __kernel_pid_t _pid; /* sender's pid */
+ __kernel_uid_t _uid; /* backwards compatibility */
+ sigval_t _sigval;
+ __kernel_uid32_t _uid32; /* sender's uid */
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ __kernel_pid_t _pid; /* which child */
+ __kernel_uid_t _uid; /* backwards compatibility */
+ int _status; /* exit code */
+ clock_t _utime;
+ clock_t _stime;
+ __kernel_uid32_t _uid32; /* sender's uid */
+ } _sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ void *_addr; /* faulting insn/memory ref. */
+ } _sigfault;
+
+ /* SIGPOLL */
+ struct {
+ int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+} siginfo_t;
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+/*
+ * How these fields are to be accessed.
+ */
+#undef si_uid
+#ifdef __KERNEL__
+#define si_uid _sifields._kill._uid32
+#define si_uid16 _sifields._kill._uid
+#else
+#define si_uid _sifields._kill._uid
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+ if (from->si_code < 0)
+ memcpy(to, from, sizeof(*to));
+ else
+ /* _sigchld is currently the largest know union member */
+ memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_SIGINFO_H
+#define _M68KNOMMU_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "signal_no.h"
+#else
+#include "signal_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_SIGNAL_H
+#define _M68K_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define __HAVE_ARCH_SIG_BITOPS
+
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+ asm ("bfset %0{%1,#1}"
+ : "+od" (*set)
+ : "id" ((_sig - 1) ^ 31)
+ : "cc");
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+ asm ("bfclr %0{%1,#1}"
+ : "+od" (*set)
+ : "id" ((_sig - 1) ^ 31)
+ : "cc");
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+ unsigned long sig = _sig - 1;
+ return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+ int ret;
+ asm ("bfextu %1{%2,#1},%0"
+ : "=d" (ret)
+ : "od" (*set), "id" ((_sig-1) ^ 31)
+ : "cc");
+ return ret;
+}
+
+#define sigismember(set,sig) \
+ (__builtin_constant_p(sig) ? \
+ __const_sigismember(set,sig) : \
+ __gen_sigismember(set,sig))
+
+static inline int sigfindinword(unsigned long word)
+{
+ asm ("bfffo %1{#0,#0},%0"
+ : "=d" (word)
+ : "d" (word & -word)
+ : "cc");
+ return word ^ 31;
+}
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SIGNAL_H */
--- /dev/null
+#ifndef _M68KNOMMU_SIGNAL_H
+#define _M68KNOMMU_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_SIGNAL_H */
--- /dev/null
+/* nothing required here yet */
--- /dev/null
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#endif /* _ASM_SOCKET_H */
--- /dev/null
+#ifndef __ARCH_M68K_SOCKIOS__
+#define __ARCH_M68K_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* __ARCH_M68K_SOCKIOS__ */
--- /dev/null
+#ifndef __M68K_SPINLOCK_H
+#define __M68K_SPINLOCK_H
+
+#error "m68k doesn't do SMP yet"
+
+#endif
--- /dev/null
+#ifndef _M68K_STAT_H
+#define _M68K_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned short st_dev;
+ unsigned short __pad1;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned short __pad2;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long __unused1;
+ unsigned long st_mtime;
+ unsigned long __unused2;
+ unsigned long st_ctime;
+ unsigned long __unused3;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[2];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#endif /* _M68K_STAT_H */
--- /dev/null
+#ifndef _M68K_STATFS_H
+#define _M68K_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _M68K_STATFS_H */
--- /dev/null
+#ifdef __uClinux__
+#include "string_no.h"
+#else
+#include "string_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_STRING_H_
+#define _M68K_STRING_H_
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+static inline size_t __kernel_strlen(const char *s)
+{
+ const char *sc;
+
+ for (sc = s; *sc++; )
+ ;
+ return sc - s - 1;
+}
+
+static inline char *__kernel_strcpy(char *dest, const char *src)
+{
+ char *xdest = dest;
+
+ asm volatile ("\n"
+ "1: move.b (%1)+,(%0)+\n"
+ " jne 1b"
+ : "+a" (dest), "+a" (src)
+ : : "memory");
+ return xdest;
+}
+
+#ifndef __IN_STRING_C
+
+#define __HAVE_ARCH_STRLEN
+#define strlen(s) (__builtin_constant_p(s) ? \
+ __builtin_strlen(s) : \
+ __kernel_strlen(s))
+
+#define __HAVE_ARCH_STRNLEN
+static inline size_t strnlen(const char *s, size_t count)
+{
+ const char *sc = s;
+
+ asm volatile ("\n"
+ "1: subq.l #1,%1\n"
+ " jcs 2f\n"
+ " tst.b (%0)+\n"
+ " jne 1b\n"
+ " subq.l #1,%0\n"
+ "2:"
+ : "+a" (sc), "+d" (count));
+ return sc - s;
+}
+
+#define __HAVE_ARCH_STRCPY
+#if __GNUC__ >= 4
+#define strcpy(d, s) (__builtin_constant_p(s) && \
+ __builtin_strlen(s) <= 32 ? \
+ __builtin_strcpy(d, s) : \
+ __kernel_strcpy(d, s))
+#else
+#define strcpy(d, s) __kernel_strcpy(d, s)
+#endif
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *dest, const char *src, size_t n)
+{
+ char *xdest = dest;
+
+ asm volatile ("\n"
+ " jra 2f\n"
+ "1: move.b (%1),(%0)+\n"
+ " jeq 2f\n"
+ " addq.l #1,%1\n"
+ "2: subq.l #1,%2\n"
+ " jcc 1b\n"
+ : "+a" (dest), "+a" (src), "+d" (n)
+ : : "memory");
+ return xdest;
+}
+
+#define __HAVE_ARCH_STRCAT
+#define strcat(d, s) ({ \
+ char *__d = (d); \
+ strcpy(__d + strlen(__d), (s)); \
+})
+
+#define __HAVE_ARCH_STRCHR
+static inline char *strchr(const char *s, int c)
+{
+ char sc, ch = c;
+
+ for (; (sc = *s++) != ch; ) {
+ if (!sc)
+ return NULL;
+ }
+ return (char *)s - 1;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *cs, const char *ct)
+{
+ char res;
+
+ asm ("\n"
+ "1: move.b (%0)+,%2\n" /* get *cs */
+ " cmp.b (%1)+,%2\n" /* compare a byte */
+ " jne 2f\n" /* not equal, break out */
+ " tst.b %2\n" /* at end of cs? */
+ " jne 1b\n" /* no, keep going */
+ " jra 3f\n" /* strings are equal */
+ "2: sub.b -(%1),%2\n" /* *cs - *ct */
+ "3:"
+ : "+a" (cs), "+a" (ct), "=d" (res));
+ return res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, __kernel_size_t);
+#define memset(d, c, n) __builtin_memset(d, c, n)
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+#define memcpy(d, s, n) __builtin_memcpy(d, s, n)
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, __kernel_size_t);
+#define memcmp(d, s, n) __builtin_memcmp(d, s, n)
+
+#endif
+
+#endif /* _M68K_STRING_H_ */
--- /dev/null
+#ifndef _M68KNOMMU_STRING_H_
+#define _M68KNOMMU_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+ char *xdest = dest;
+
+ __asm__ __volatile__
+ ("1:\tmoveb %1@+,%0@+\n\t"
+ "jne 1b"
+ : "=a" (dest), "=a" (src)
+ : "0" (dest), "1" (src) : "memory");
+ return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+ char *xdest = dest;
+
+ if (n == 0)
+ return xdest;
+
+ __asm__ __volatile__
+ ("1:\tmoveb %1@+,%0@+\n\t"
+ "jeq 2f\n\t"
+ "subql #1,%2\n\t"
+ "jne 1b\n\t"
+ "2:"
+ : "=a" (dest), "=a" (src), "=d" (n)
+ : "0" (dest), "1" (src), "2" (n)
+ : "memory");
+ return xdest;
+}
+
+
+#ifndef CONFIG_COLDFIRE
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+ char __res;
+
+ __asm__
+ ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+ "cmpb %1@+,%2\n\t" /* compare a byte */
+ "jne 2f\n\t" /* not equal, break out */
+ "tstb %2\n\t" /* at end of cs? */
+ "jne 1b\n\t" /* no, keep going */
+ "jra 3f\n\t" /* strings are equal */
+ "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */
+ "3:"
+ : "=a" (cs), "=a" (ct), "=d" (__res)
+ : "0" (cs), "1" (ct));
+
+ return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+ char __res;
+
+ if (!count)
+ return 0;
+ __asm__
+ ("1:\tmovb %0@+,%3\n\t" /* get *cs */
+ "cmpb %1@+,%3\n\t" /* compare a byte */
+ "jne 3f\n\t" /* not equal, break out */
+ "tstb %3\n\t" /* at end of cs? */
+ "jeq 4f\n\t" /* yes, all done */
+ "subql #1,%2\n\t" /* no, adjust count */
+ "jne 1b\n\t" /* more to do, keep going */
+ "2:\tmoveq #0,%3\n\t" /* strings are equal */
+ "jra 4f\n\t"
+ "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */
+ "4:"
+ : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+ : "0" (cs), "1" (ct), "2" (count));
+ return __res;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ * let user libraries deal with these,
+ * IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
--- /dev/null
+#ifndef __SUN3_HEAD_H
+#define __SUN3_HEAD_H
+
+#define KERNBASE 0xE000000 /* First address the kernel will eventually be */
+#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */
+#define FC_CONTROL 3
+#define FC_SUPERD 5
+#define FC_CPU 7
+
+#endif /* __SUN3_HEAD_H */
--- /dev/null
+/* sun3_pgalloc.h --
+ * reorganization around 2.3.39, routines moved from sun3_pgtable.h
+ *
+ *
+ * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam)
+ *
+ * moved 1/26/2000 Sam Creasey
+ */
+
+#ifndef _SUN3_PGALLOC_H
+#define _SUN3_PGALLOC_H
+
+#include <asm/tlb.h>
+
+/* FIXME - when we get this compiling */
+/* erm, now that it's compiling, what do we do with it? */
+#define _KERNPG_TABLE 0
+
+extern const char bad_pmd_string[];
+
+#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); })
+
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t page)
+{
+ pgtable_page_dtor(page);
+ __free_page(page);
+}
+
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), pte); \
+} while (0)
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT);
+
+ if (!page)
+ return NULL;
+
+ memset((void *)page, 0, PAGE_SIZE);
+ return (pte_t *) (page);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+
+ if (page == NULL)
+ return NULL;
+
+ clear_highpage(page);
+ pgtable_page_ctor(page);
+ return page;
+
+}
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+ pmd_val(*pmd) = __pa((unsigned long)pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
+{
+ pmd_val(*pmd) = __pa((unsigned long)page_address(page));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_free(mm, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x) do { } while (0)
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_page((unsigned long) pgd);
+}
+
+static inline pgd_t * pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *new_pgd;
+
+ new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+ memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
+ memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
+ return new_pgd;
+}
+
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#endif /* SUN3_PGALLOC_H */
--- /dev/null
+#ifndef _SUN3_PGTABLE_H
+#define _SUN3_PGTABLE_H
+
+#include <asm/sun3mmu.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/virtconvert.h>
+#include <linux/linkage.h>
+
+/*
+ * This file contains all the things which change drastically for the sun3
+ * pagetable stuff, to avoid making too much of a mess of the generic m68k
+ * `pgtable.h'; this should only be included from the generic file. --m
+ */
+
+/* For virtual address to physical address conversion */
+#define VTOP(addr) __pa(addr)
+#define PTOV(addr) __va(addr)
+
+
+#endif /* !__ASSEMBLY__ */
+
+/* These need to be defined for compatibility although the sun3 doesn't use them */
+#define _PAGE_NOCACHE030 0x040
+#define _CACHEMASK040 (~0x060)
+#define _PAGE_NOCACHE_S 0x040
+
+/* Page protection values within PTE. */
+#define SUN3_PAGE_VALID (0x80000000)
+#define SUN3_PAGE_WRITEABLE (0x40000000)
+#define SUN3_PAGE_SYSTEM (0x20000000)
+#define SUN3_PAGE_NOCACHE (0x10000000)
+#define SUN3_PAGE_ACCESSED (0x02000000)
+#define SUN3_PAGE_MODIFIED (0x01000000)
+
+
+/* Externally used page protection values. */
+#define _PAGE_PRESENT (SUN3_PAGE_VALID)
+#define _PAGE_ACCESSED (SUN3_PAGE_ACCESSED)
+
+#define PTE_FILE_MAX_BITS 28
+
+/* Compound page protection values. */
+//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix...
+// is it just PAGE_KERNEL and PAGE_SHARED?
+#define PAGE_NONE __pgprot(SUN3_PAGE_VALID \
+ | SUN3_PAGE_ACCESSED \
+ | SUN3_PAGE_NOCACHE)
+#define PAGE_SHARED __pgprot(SUN3_PAGE_VALID \
+ | SUN3_PAGE_WRITEABLE \
+ | SUN3_PAGE_ACCESSED \
+ | SUN3_PAGE_NOCACHE)
+#define PAGE_COPY __pgprot(SUN3_PAGE_VALID \
+ | SUN3_PAGE_ACCESSED \
+ | SUN3_PAGE_NOCACHE)
+#define PAGE_READONLY __pgprot(SUN3_PAGE_VALID \
+ | SUN3_PAGE_ACCESSED \
+ | SUN3_PAGE_NOCACHE)
+#define PAGE_KERNEL __pgprot(SUN3_PAGE_VALID \
+ | SUN3_PAGE_WRITEABLE \
+ | SUN3_PAGE_SYSTEM \
+ | SUN3_PAGE_NOCACHE \
+ | SUN3_PAGE_ACCESSED \
+ | SUN3_PAGE_MODIFIED)
+#define PAGE_INIT __pgprot(SUN3_PAGE_VALID \
+ | SUN3_PAGE_WRITEABLE \
+ | SUN3_PAGE_SYSTEM \
+ | SUN3_PAGE_NOCACHE)
+
+/*
+ * Page protections for initialising protection_map. The sun3 has only two
+ * protection settings, valid (implying read and execute) and writeable. These
+ * are as close as we can get...
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY
+#define __P101 PAGE_READONLY
+#define __P110 PAGE_COPY
+#define __P111 PAGE_COPY
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY
+#define __S101 PAGE_READONLY
+#define __S110 PAGE_SHARED
+#define __S111 PAGE_SHARED
+
+/* Use these fake page-protections on PMDs. */
+#define SUN3_PMD_VALID (0x00000001)
+#define SUN3_PMD_MASK (0x0000003F)
+#define SUN3_PMD_MAGIC (0x0000002B)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+#define pmd_set(pmdp,ptep) do {} while (0)
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+ pgd_val(*pgdp) = virt_to_phys(pmdp);
+}
+
+#define __pte_page(pte) \
+((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT))
+#define __pmd_page(pmd) \
+((unsigned long) __va (pmd_val (pmd) & PAGE_MASK))
+
+static inline int pte_none (pte_t pte) { return !pte_val (pte); }
+static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; }
+static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ pte_val (*ptep) = 0;
+}
+
+#define pte_pfn(pte) (pte_val(pte) & SUN3_PAGE_PGNUM_MASK)
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
+
+#define pte_page(pte) virt_to_page(__pte_page(pte))
+#define pmd_page(pmd) virt_to_page(__pmd_page(pmd))
+
+
+static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); }
+#define pmd_none(pmd) pmd_none2(&(pmd))
+//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; }
+static inline int pmd_bad2 (pmd_t *pmd) { return 0; }
+#define pmd_bad(pmd) pmd_bad2(&(pmd))
+static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; }
+/* #define pmd_present(pmd) pmd_present2(&(pmd)) */
+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
+static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
+
+static inline int pgd_none (pgd_t pgd) { return 0; }
+static inline int pgd_bad (pgd_t pgd) { return 0; }
+static inline int pgd_present (pgd_t pgd) { return 1; }
+static inline void pgd_clear (pgd_t *pgdp) {}
+
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not...
+ * [we have the full set here even if they don't change from m68k]
+ */
+static inline int pte_write(pte_t pte) { return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & SUN3_PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
+static inline int pte_special(pte_t pte) { return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mknocache(pte_t pte) { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; }
+// use this version when caches work...
+//static inline pte_t pte_mkcache(pte_t pte) { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
+// until then, use:
+static inline pte_t pte_mkcache(pte_t pte) { return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
+
+/* Find an entry in a pagetable directory. */
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, address) \
+((mm)->pgd + pgd_index(address))
+
+/* Find an entry in a kernel pagetable directory. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level pagetable. */
+static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address)
+{
+ return (pmd_t *) pgd;
+}
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+ return pte.pte & SUN3_PAGE_PGNUM_MASK;
+}
+
+static inline pte_t pgoff_to_pte(unsigned off)
+{
+ pte_t pte = { off + SUN3_PAGE_ACCESSED };
+ return pte;
+}
+
+
+/* Find an entry in the third-level pagetable. */
+#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address))
+/* FIXME: should we bother with kmap() here? */
+#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address))
+#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address)
+#define pte_unmap(pte) kunmap(pte)
+#define pte_unmap_nested(pte) kunmap(pte)
+
+/* Macros to (de)construct the fake PTEs representing swap pages. */
+#define __swp_type(x) ((x).val & 0x7F)
+#define __swp_offset(x) (((x).val) >> 7)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+#endif /* !__ASSEMBLY__ */
+#endif /* !_SUN3_PGTABLE_H */
--- /dev/null
+/*
+ * sun3ints.h -- Linux/Sun3 interrupt handling code definitions
+ *
+ * Erik Verbruggen (erik@bigmama.xtdnet.nl)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef SUN3INTS_H
+#define SUN3INTS_H
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/intersil.h>
+#include <asm/oplib.h>
+#include <asm/traps.h>
+#include <asm/irq.h>
+
+#define SUN3_INT_VECS 192
+
+void sun3_enable_irq(unsigned int irq);
+void sun3_disable_irq(unsigned int irq);
+extern void sun3_init_IRQ (void);
+extern void sun3_enable_interrupts (void);
+extern void sun3_disable_interrupts (void);
+extern volatile unsigned char* sun3_intreg;
+
+/* master list of VME vectors -- don't fuck with this */
+#define SUN3_VEC_FLOPPY (IRQ_USER+0)
+#define SUN3_VEC_VMESCSI0 (IRQ_USER+0)
+#define SUN3_VEC_VMESCSI1 (IRQ_USER+1)
+#define SUN3_VEC_CG (IRQ_USER+104)
+
+
+#endif /* SUN3INTS_H */
--- /dev/null
+/*
+ * Definitions for Sun3 custom MMU.
+ */
+#ifndef __SUN3_MMU_H__
+#define __SUN3_MMU_H__
+
+#include <linux/types.h>
+#include <asm/movs.h>
+#include <asm/sun3-head.h>
+
+/* MMU characteristics. */
+#define SUN3_SEGMAPS_PER_CONTEXT 2048
+#define SUN3_PMEGS_NUM 256
+#define SUN3_CONTEXTS_NUM 8
+
+#define SUN3_PMEG_SIZE_BITS 17
+#define SUN3_PMEG_SIZE (1 << SUN3_PMEG_SIZE_BITS)
+#define SUN3_PMEG_MASK (SUN3_PMEG_SIZE - 1)
+
+#define SUN3_PTE_SIZE_BITS 13
+#define SUN3_PTE_SIZE (1 << SUN3_PTE_SIZE_BITS)
+#define SUN3_PTE_MASK (SUN3_PTE_SIZE - 1)
+
+#define SUN3_CONTROL_MASK (0x0FFFFFFC)
+#define SUN3_INVALID_PMEG 255
+#define SUN3_INVALID_CONTEXT 255
+
+#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */
+#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */
+#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */
+#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */
+#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */
+#define AC_BUS_ERROR 0x60000000 /* 34 Cleared on read, byte. */
+#define AC_SYNC_ERR 0x60000000 /* c fault type */
+#define AC_SYNC_VA 0x60000004 /* c fault virtual address */
+#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */
+#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */
+#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */
+#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */
+#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */
+#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */
+#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */
+#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/
+
+#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \
+ | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED)
+
+/* Bus access type within PTE. */
+#define SUN3_PAGE_TYPE_MASK (0x0c000000)
+#define SUN3_PAGE_TYPE_MEMORY (0x00000000)
+#define SUN3_PAGE_TYPE_IO (0x04000000)
+#define SUN3_PAGE_TYPE_VME16 (0x08000000)
+#define SUN3_PAGE_TYPE_VME32 (0x0c000000)
+
+/* Mask for page number within PTE. */
+#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF)
+
+/* Bits within bus-error register. */
+#define SUN3_BUSERR_WATCHDOG (0x01)
+#define SUN3_BUSERR_unused (0x02)
+#define SUN3_BUSERR_FPAENERR (0x04)
+#define SUN3_BUSERR_FPABERR (0x08)
+#define SUN3_BUSERR_VMEBERR (0x10)
+#define SUN3_BUSERR_TIMEOUT (0x20)
+#define SUN3_BUSERR_PROTERR (0x40)
+#define SUN3_BUSERR_INVALID (0x80)
+
+#ifndef __ASSEMBLY__
+
+/* Read bus error status register (implicitly clearing it). */
+static inline unsigned char sun3_get_buserr(void)
+{
+ unsigned char sfc, c;
+
+ GET_SFC (sfc);
+ SET_SFC (FC_CONTROL);
+ GET_CONTROL_BYTE (AC_BUS_ERROR, c);
+ SET_SFC (sfc);
+
+ return c;
+}
+
+/* Read segmap from hardware MMU. */
+static inline unsigned long sun3_get_segmap(unsigned long addr)
+{
+ register unsigned long entry;
+ unsigned char c, sfc;
+
+ GET_SFC (sfc);
+ SET_SFC (FC_CONTROL);
+ GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c);
+ SET_SFC (sfc);
+ entry = c;
+
+ return entry;
+}
+
+/* Write segmap to hardware MMU. */
+static inline void sun3_put_segmap(unsigned long addr, unsigned long entry)
+{
+ unsigned char sfc;
+
+ GET_DFC (sfc);
+ SET_DFC (FC_CONTROL);
+ SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry);
+ SET_DFC (sfc);
+
+ return;
+}
+
+/* Read PTE from hardware MMU. */
+static inline unsigned long sun3_get_pte(unsigned long addr)
+{
+ register unsigned long entry;
+ unsigned char sfc;
+
+ GET_SFC (sfc);
+ SET_SFC (FC_CONTROL);
+ GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
+ SET_SFC (sfc);
+
+ return entry;
+}
+
+/* Write PTE to hardware MMU. */
+static inline void sun3_put_pte(unsigned long addr, unsigned long entry)
+{
+ unsigned char sfc;
+
+ GET_DFC (sfc);
+ SET_DFC (FC_CONTROL);
+ SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
+ SET_DFC (sfc);
+
+ return;
+}
+
+/* get current context */
+static inline unsigned char sun3_get_context(void)
+{
+ unsigned char sfc, c;
+
+ GET_SFC(sfc);
+ SET_SFC(FC_CONTROL);
+ GET_CONTROL_BYTE(AC_CONTEXT, c);
+ SET_SFC(sfc);
+
+ return c;
+}
+
+/* set alternate context */
+static inline void sun3_put_context(unsigned char c)
+{
+ unsigned char dfc;
+ GET_DFC(dfc);
+ SET_DFC(FC_CONTROL);
+ SET_CONTROL_BYTE(AC_CONTEXT, c);
+ SET_DFC(dfc);
+
+ return;
+}
+
+extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size,
+ unsigned long type);
+
+extern int sun3_map_test(unsigned long addr, char *val);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !__SUN3_MMU_H__ */
--- /dev/null
+#ifndef SUN3X_H
+#define SUN3X_H
+
+/* hardware addresses */
+#define SUN3X_IOMMU 0x60000000
+#define SUN3X_ENAREG 0x61000000
+#define SUN3X_INTREG 0x61001400
+#define SUN3X_DIAGREG 0x61001800
+#define SUN3X_ZS1 0x62000000
+#define SUN3X_ZS2 0x62002000
+#define SUN3X_LANCE 0x65002000
+#define SUN3X_EEPROM 0x64000000
+#define SUN3X_IDPROM 0x640007d8
+#define SUN3X_VIDEO_BASE 0x50000000
+#define SUN3X_VIDEO_P4ID 0x50300000
+#define SUN3X_ESP_BASE 0x66000000
+#define SUN3X_ESP_DMA 0x66001000
+#define SUN3X_FDC 0x6e000000
+#define SUN3X_FDC_FCR 0x6e000400
+#define SUN3X_FDC_FVR 0x6e000800
+
+/* some NVRAM addresses */
+#define SUN3X_EEPROM_CONS (SUN3X_EEPROM + 0x1f)
+#define SUN3X_EEPROM_PORTA (SUN3X_EEPROM + 0x58)
+#define SUN3X_EEPROM_PORTB (SUN3X_EEPROM + 0x60)
+
+#endif
--- /dev/null
+/* sun3xflop.h: Sun3/80 specific parts of the floppy driver.
+ *
+ * Derived partially from asm-sparc/floppy.h, which is:
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net)
+ */
+
+#ifndef __ASM_SUN3X_FLOPPY_H
+#define __ASM_SUN3X_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/sun3x.h>
+
+/* default interrupt vector */
+#define SUN3X_FDC_IRQ 0x40
+
+/* some constants */
+#define FCR_TC 0x1
+#define FCR_EJECT 0x2
+#define FCR_MTRON 0x4
+#define FCR_DSEL1 0x8
+#define FCR_DSEL0 0x10
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y) do { } while(0)
+#define request_region(X, Y, Z) (1)
+
+struct sun3xflop_private {
+ volatile unsigned char *status_r;
+ volatile unsigned char *data_r;
+ volatile unsigned char *fcr_r;
+ volatile unsigned char *fvr_r;
+ unsigned char fcr;
+} sun3x_fdc;
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun3x_82072_fd_inb(int port)
+{
+ static int once = 0;
+// udelay(5);
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to read unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 4: /* FD_STATUS */
+ return (*sun3x_fdc.status_r) & ~STATUS_DMA;
+ case 5: /* FD_DATA */
+ return (*sun3x_fdc.data_r);
+ case 7: /* FD_DIR */
+ /* ugly hack, I can't find a way to actually detect the disk */
+ if(!once) {
+ once = 1;
+ return 0x80;
+ }
+ return 0;
+ };
+ panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun3x_82072_fd_outb(unsigned char value, int port)
+{
+// udelay(5);
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to write to unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 2: /* FD_DOR */
+ /* Oh geese, 82072 on the Sun has no DOR register,
+ * so we make do with taunting the FCR.
+ *
+ * ASSUMPTIONS: There will only ever be one floppy
+ * drive attached to a Sun controller
+ * and it will be at drive zero.
+ */
+
+ {
+ unsigned char fcr = sun3x_fdc.fcr;
+
+ if(value & 0x10) {
+ fcr |= (FCR_DSEL0 | FCR_MTRON);
+ } else
+ fcr &= ~(FCR_DSEL0 | FCR_MTRON);
+
+
+ if(fcr != sun3x_fdc.fcr) {
+ *(sun3x_fdc.fcr_r) = fcr;
+ sun3x_fdc.fcr = fcr;
+ }
+ }
+ break;
+ case 5: /* FD_DATA */
+ *(sun3x_fdc.data_r) = value;
+ break;
+ case 7: /* FD_DCR */
+ *(sun3x_fdc.status_r) = value;
+ break;
+ case 4: /* FD_STATUS */
+ *(sun3x_fdc.status_r) = value;
+ break;
+ };
+ return;
+}
+
+
+asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id)
+{
+ register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+ static int calls=0;
+ static int bytes=0;
+ static int dma_wait=0;
+#endif
+ if(!doing_pdma) {
+ floppy_interrupt(irq, dev_id);
+ return IRQ_HANDLED;
+ }
+
+// printk("doing pdma\n");// st %x\n", sun_fdc->status_82072);
+
+#ifdef TRACE_FLPY_INT
+ if(!calls)
+ bytes = virtual_dma_count;
+#endif
+
+ {
+ register int lcount;
+ register char *lptr;
+
+ for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+/* st=fd_inb(virtual_dma_port+4) & 0x80 ; */
+ st = *(sun3x_fdc.status_r);
+/* if(st != 0xa0) */
+/* break; */
+
+ if((st & 0x80) == 0) {
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ return IRQ_HANDLED;
+ }
+
+ if((st & 0x20) == 0)
+ break;
+
+ if(virtual_dma_mode)
+/* fd_outb(*lptr, virtual_dma_port+5); */
+ *(sun3x_fdc.data_r) = *lptr;
+ else
+/* *lptr = fd_inb(virtual_dma_port+5); */
+ *lptr = *(sun3x_fdc.data_r);
+ }
+
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+/* st = fd_inb(virtual_dma_port+4); */
+ st = *(sun3x_fdc.status_r);
+ }
+
+#ifdef TRACE_FLPY_INT
+ calls++;
+#endif
+// printk("st=%02x\n", st);
+ if(st == 0x20)
+ return IRQ_HANDLED;
+ if(!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+ doing_pdma = 0;
+
+#ifdef TRACE_FLPY_INT
+ printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n",
+ virtual_dma_count, virtual_dma_residue, calls, bytes,
+ dma_wait);
+ calls = 0;
+ dma_wait=0;
+#endif
+
+ floppy_interrupt(irq, dev_id);
+ return IRQ_HANDLED;
+ }
+
+
+#ifdef TRACE_FLPY_INT
+ if(!virtual_dma_count)
+ dma_wait++;
+#endif
+ return IRQ_HANDLED;
+}
+
+static int sun3xflop_request_irq(void)
+{
+ static int once = 0;
+ int error;
+
+ if(!once) {
+ once = 1;
+ error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
+ IRQF_DISABLED, "floppy", NULL);
+ return ((error == 0) ? 0 : -1);
+ } else return 0;
+}
+
+static void __init floppy_set_flags(int *ints,int param, int param2);
+
+static int sun3xflop_init(void)
+{
+ if(FLOPPY_IRQ < 0x40)
+ FLOPPY_IRQ = SUN3X_FDC_IRQ;
+
+ sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC;
+ sun3x_fdc.data_r = (volatile unsigned char *)(SUN3X_FDC+1);
+ sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR;
+ sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR;
+ sun3x_fdc.fcr = 0;
+
+ /* Last minute sanity check... */
+ if(*sun3x_fdc.status_r == 0xff) {
+ return -1;
+ }
+
+ *sun3x_fdc.fvr_r = FLOPPY_IRQ;
+
+ *sun3x_fdc.fcr_r = FCR_TC;
+ udelay(10);
+ *sun3x_fdc.fcr_r = 0;
+
+ /* Success... */
+ floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this.
+ allowed_drive_mask = 0x01;
+ return (int) SUN3X_FDC;
+}
+
+/* I'm not precisely sure this eject routine works */
+static int sun3x_eject(void)
+{
+ if(MACH_IS_SUN3X) {
+
+ sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT);
+ *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
+ udelay(10);
+ sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT);
+ *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
+ }
+
+ return 0;
+}
+
+#define fd_eject(drive) sun3x_eject()
+
+#endif /* !(__ASM_SUN3X_FLOPPY_H) */
--- /dev/null
+/* Useful PROM locations */
+
+#ifndef SUN3X_PROM_H
+#define SUN3X_PROM_H
+
+extern void (*sun3x_putchar)(int);
+extern int (*sun3x_getchar)(void);
+extern int (*sun3x_mayget)(void);
+extern int (*sun3x_mayput)(int);
+
+void sun3x_reboot(void);
+void sun3x_abort(void);
+void sun3x_prom_init(void);
+unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size);
+
+/* interesting hardware locations */
+#define SUN3X_IOMMU 0x60000000
+#define SUN3X_ENAREG 0x61000000
+#define SUN3X_INTREG 0x61001400
+#define SUN3X_DIAGREG 0x61001800
+#define SUN3X_ZS1 0x62000000
+#define SUN3X_ZS2 0x62002000
+#define SUN3X_LANCE 0x65002000
+#define SUN3X_EEPROM 0x64000000
+#define SUN3X_IDPROM 0x640007d8
+#define SUN3X_VIDEO_BASE 0x50400000
+#define SUN3X_VIDEO_REGS 0x50300000
+
+/* vector table */
+#define SUN3X_PROM_BASE 0xfefe0000
+#define SUN3X_P_GETCHAR (SUN3X_PROM_BASE + 20)
+#define SUN3X_P_PUTCHAR (SUN3X_PROM_BASE + 24)
+#define SUN3X_P_MAYGET (SUN3X_PROM_BASE + 28)
+#define SUN3X_P_MAYPUT (SUN3X_PROM_BASE + 32)
+#define SUN3X_P_REBOOT (SUN3X_PROM_BASE + 96)
+#define SUN3X_P_SETLEDS (SUN3X_PROM_BASE + 144)
+#define SUN3X_P_ABORT (SUN3X_PROM_BASE + 152)
+
+/* mapped area */
+#define SUN3X_MAP_START 0xfee00000
+#define SUN3X_MAP_END 0xff000000
+
+#endif
--- /dev/null
+#ifndef _M68K_SUSPEND_H
+#define _M68K_SUSPEND_H
+
+/* Dummy include. */
+
+#endif /* _M68K_SUSPEND_H */
--- /dev/null
+#ifdef __uClinux__
+#include "swab_no.h"
+#else
+#include "swab_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_SWAB_H
+#define _M68K_SWAB_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+ __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+ return val;
+}
+#define __arch_swab32 __arch_swab32
+
+#endif /* _M68K_SWAB_H */
--- /dev/null
+#ifndef _M68KNOMMU_SWAB_H
+#define _M68KNOMMU_SWAB_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __SWAB_64_THRU_32__
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+ asm(
+ "byterev %0"
+ : "=d" (val)
+ : "0" (val)
+ );
+ return val;
+}
+
+#define __arch_swab32 __arch_swab32
+#endif
+
+#endif /* _M68KNOMMU_SWAB_H */
--- /dev/null
+#ifdef __uClinux__
+#include "system_no.h"
+#else
+#include "system_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_SYSTEM_H
+#define _M68K_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) do { \
+ register void *_prev __asm__ ("a0") = (prev); \
+ register void *_next __asm__ ("a1") = (next); \
+ register void *_last __asm__ ("d1"); \
+ __asm__ __volatile__("jbsr resume" \
+ : "=a" (_prev), "=a" (_next), "=d" (_last) \
+ : "0" (_prev), "1" (_next) \
+ : "d0", "d2", "d3", "d4", "d5"); \
+ (last) = _last; \
+} while (0)
+
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop() do { asm volatile ("nop"); barrier(); } while (0)
+#define mb() barrier()
+#define rmb() barrier()
+#define wmb() barrier()
+#define read_barrier_depends() ((void)0)
+#define set_mb(var, value) ({ (var) = (value); wmb(); })
+
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() ((void)0)
+
+/* interrupt control.. */
+#if 0
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#else
+#include <linux/hardirq.h>
+#define local_irq_enable() ({ \
+ if (MACH_IS_Q40 || !hardirq_count()) \
+ asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \
+})
+#endif
+#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+static inline int irqs_disabled(void)
+{
+ unsigned long flags;
+ local_save_flags(flags);
+ return flags & ~ALLOWINT;
+}
+
+/* For spinlocks etc */
+#define local_irq_save(x) ({ local_save_flags(x); local_irq_disable(); })
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ unsigned long flags, tmp;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ tmp = *(u8 *)ptr;
+ *(u8 *)ptr = x;
+ x = tmp;
+ break;
+ case 2:
+ tmp = *(u16 *)ptr;
+ *(u16 *)ptr = x;
+ x = tmp;
+ break;
+ case 4:
+ tmp = *(u32 *)ptr;
+ *(u32 *)ptr = x;
+ x = tmp;
+ break;
+ default:
+ BUG();
+ }
+
+ local_irq_restore(flags);
+ return x;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("moveb %2,%0\n\t"
+ "1:\n\t"
+ "casb %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("movew %2,%0\n\t"
+ "1:\n\t"
+ "casw %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("movel %2,%0\n\t"
+ "1:\n\t"
+ "casl %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+/*
+ * Atomic compare and exchange. Compare OLD with MEM, if identical,
+ * store NEW in MEM. Return the initial value in MEM. Success is
+ * indicated by comparing RETURN with OLD.
+ */
+#ifdef CONFIG_RMW_INSNS
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
+ unsigned long new, int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__ ("casb %0,%2,%1"
+ : "=d" (old), "=m" (*(char *)p)
+ : "d" (new), "0" (old), "m" (*(char *)p));
+ break;
+ case 2:
+ __asm__ __volatile__ ("casw %0,%2,%1"
+ : "=d" (old), "=m" (*(short *)p)
+ : "d" (new), "0" (old), "m" (*(short *)p));
+ break;
+ case 4:
+ __asm__ __volatile__ ("casl %0,%2,%1"
+ : "=d" (old), "=m" (*(int *)p)
+ : "d" (new), "0" (old), "m" (*(int *)p));
+ break;
+ }
+ return old;
+}
+
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+#else
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SYSTEM_H */
--- /dev/null
+#ifndef _M68KNOMMU_SYSTEM_H
+#define _M68KNOMMU_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) \
+{ \
+ void *_last; \
+ __asm__ __volatile__( \
+ "movel %1, %%a0\n\t" \
+ "movel %2, %%a1\n\t" \
+ "jbsr resume\n\t" \
+ "movel %%d1, %0\n\t" \
+ : "=d" (_last) \
+ : "d" (prev), "d" (next) \
+ : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
+ (last) = _last; \
+}
+
+#ifdef CONFIG_COLDFIRE
+#define local_irq_enable() __asm__ __volatile__ ( \
+ "move %/sr,%%d0\n\t" \
+ "andi.l #0xf8ff,%%d0\n\t" \
+ "move %%d0,%/sr\n" \
+ : /* no outputs */ \
+ : \
+ : "cc", "%d0", "memory")
+#define local_irq_disable() __asm__ __volatile__ ( \
+ "move %/sr,%%d0\n\t" \
+ "ori.l #0x0700,%%d0\n\t" \
+ "move %%d0,%/sr\n" \
+ : /* no outputs */ \
+ : \
+ : "cc", "%d0", "memory")
+/* For spinlocks etc */
+#define local_irq_save(x) __asm__ __volatile__ ( \
+ "movew %%sr,%0\n\t" \
+ "movew #0x0700,%%d0\n\t" \
+ "or.l %0,%%d0\n\t" \
+ "movew %%d0,%/sr" \
+ : "=d" (x) \
+ : \
+ : "cc", "%d0", "memory")
+#else
+
+/* portable version */ /* FIXME - see entry.h*/
+#define ALLOWINT 0xf8ff
+
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
+#endif
+
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+/* For spinlocks etc */
+#ifndef local_irq_save
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
+#endif
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ ((flags & 0x0700) == 0x0700); \
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop() asm volatile ("nop"::)
+#define mb() asm volatile ("" : : :"memory")
+#define rmb() asm volatile ("" : : :"memory")
+#define wmb() asm volatile ("" : : :"memory")
+#define set_mb(var, value) ({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#define read_barrier_depends() ((void)0)
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ unsigned long tmp, flags;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("moveb %2,%0\n\t"
+ "moveb %1,%2"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("movew %2,%0\n\t"
+ "movew %1,%2"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("movel %2,%0\n\t"
+ "movel %1,%2"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ local_irq_restore(flags);
+ return tmp;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("moveb %2,%0\n\t"
+ "1:\n\t"
+ "casb %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("movew %2,%0\n\t"
+ "1:\n\t"
+ "casw %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("movel %2,%0\n\t"
+ "1:\n\t"
+ "casl %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
+ defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
+#define HARD_RESET_NOW() ({ \
+ local_irq_disable(); \
+ asm(" \
+ moveal #0x10c00000, %a0; \
+ moveb #0, 0xFFFFF300; \
+ moveal 0(%a0), %sp; \
+ moveal 4(%a0), %a0; \
+ jmp (%a0); \
+ "); \
+})
+#endif
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+/*
+ * Need to account for broken early mask of 5272 silicon. So don't
+ * jump through the original start address. Jump strait into the
+ * known start of the FLASH code.
+ */
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ jmp 0xf0000400; \
+ "); \
+})
+#elif defined(CONFIG_NETtel) || \
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ moveal #0x10000044, %a0; \
+ movel #0xffffffff, (%a0); \
+ moveal #0x10000001, %a0; \
+ moveb #0x00, (%a0); \
+ moveal #0xf0000004, %a0; \
+ moveal (%a0), %a0; \
+ jmp (%a0); \
+ "); \
+})
+#elif defined(CONFIG_M5272)
+/*
+ * Retrieve the boot address in flash using CSBR0 and CSOR0
+ * find the reset vector at flash_address + 4 (e.g. 0x400)
+ * remap it in the flash's current location (e.g. 0xf0000400)
+ * and jump there.
+ */
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %%sr; \
+ move.l %0+0x40,%%d0; \
+ and.l %0+0x44,%%d0; \
+ andi.l #0xfffff000,%%d0; \
+ mov.l %%d0,%%a0; \
+ or.l 4(%%a0),%%d0; \
+ mov.l %%d0,%%a0; \
+ jmp (%%a0);" \
+ : /* No output */ \
+ : "o" (*(char *)MCF_MBAR) ); \
+})
+#elif defined(CONFIG_M528x)
+/*
+ * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
+ * that when set, resets the MCF528x.
+ */
+#define HARD_RESET_NOW() \
+({ \
+ unsigned char volatile *reset; \
+ asm("move.w #0x2700, %sr"); \
+ reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \
+ while(1) \
+ *reset |= (0x01 << 7);\
+})
+#elif defined(CONFIG_M523x)
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ movel #0x01000000, %sp; \
+ moveal #0x40110000, %a0; \
+ moveb #0x80, (%a0); \
+ "); \
+})
+#elif defined(CONFIG_M520x)
+ /*
+ * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register
+ * RCR), that when set, resets the MCF5208.
+ */
+#define HARD_RESET_NOW() \
+({ \
+ unsigned char volatile *reset; \
+ asm("move.w #0x2700, %sr"); \
+ reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \
+ while(1) \
+ *reset |= 0x80; \
+})
+#else
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ moveal #0x4, %a0; \
+ moveal (%a0), %a0; \
+ jmp (%a0); \
+ "); \
+})
+#endif
+#endif
+#define arch_align_stack(x) (x)
+
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+ if (flags & 0x0700)
+ return 0;
+ else
+ return 1;
+}
+
+#endif /* _M68KNOMMU_SYSTEM_H */
--- /dev/null
+#ifndef __ARCH_M68K_TERMBITS_H__
+#define __ARCH_M68K_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* __ARCH_M68K_TERMBITS_H__ */
--- /dev/null
+#ifndef _M68K_TERMIOS_H
+#define _M68K_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ unsigned short tmp; \
+ get_user(tmp, &(termio)->c_iflag); \
+ (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+ get_user(tmp, &(termio)->c_oflag); \
+ (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+ get_user(tmp, &(termio)->c_cflag); \
+ (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+ get_user(tmp, &(termio)->c_lflag); \
+ (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+ get_user((termios)->c_line, &(termio)->c_line); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_TERMIOS_H */
--- /dev/null
+#ifdef __uClinux__
+#include "thread_info_no.h"
+#else
+#include "thread_info_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_M68K_THREAD_INFO_H
+#define _ASM_M68K_THREAD_INFO_H
+
+#include <asm/types.h>
+#include <asm/page.h>
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ unsigned long flags;
+ struct exec_domain *exec_domain; /* execution domain */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ __u32 cpu; /* should always be 0 on m68k */
+ struct restart_block restart_block;
+};
+
+#define PREEMPT_ACTIVE 0x4000000
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
+
+#define init_thread_info (init_task.thread.info)
+#define init_stack (init_thread_union.stack)
+
+#define task_thread_info(tsk) (&(tsk)->thread.info)
+#define task_stack_page(tsk) ((tsk)->stack)
+#define current_thread_info() task_thread_info(current)
+
+#define __HAVE_THREAD_FUNCTIONS
+
+#define setup_thread_stack(p, org) ({ \
+ *(struct task_struct **)(p)->stack = (p); \
+ task_thread_info(p)->task = (p); \
+})
+
+#define end_of_stack(p) ((unsigned long *)(p)->stack + 1)
+
+/* entry.S relies on these definitions!
+ * bits 0-7 are tested at every exception exit
+ * bits 8-15 are also tested at syscall exit
+ */
+#define TIF_SIGPENDING 6 /* signal pending */
+#define TIF_NEED_RESCHED 7 /* rescheduling necessary */
+#define TIF_DELAYED_TRACE 14 /* single step a syscall */
+#define TIF_SYSCALL_TRACE 15 /* syscall trace active */
+#define TIF_MEMDIE 16
+#define TIF_FREEZE 17 /* thread is freezing for suspend */
+
+#endif /* _ASM_M68K_THREAD_INFO_H */
--- /dev/null
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ __asm__(
+ "move.l %%sp, %0 \n\t"
+ "and.l %1, %0"
+ : "=&d"(ti)
+ : "di" (~(THREAD_SIZE-1))
+ );
+ return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+#define TIF_MEMDIE 4
+#define TIF_FREEZE 16 /* is freezing for suspend */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
--- /dev/null
+#ifdef __uClinux__
+#include "timex_no.h"
+#else
+#include "timex_mm.h"
+#endif
--- /dev/null
+/*
+ * linux/include/asm-m68k/timex.h
+ *
+ * m68k architecture timex specifications
+ */
+#ifndef _ASMm68k_TIMEX_H
+#define _ASMm68k_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+#endif
--- /dev/null
+/*
+ * linux/include/asm-m68knommu/timex.h
+ *
+ * m68knommu architecture timex specifications
+ */
+#ifndef _ASM_M68KNOMMU_TIMEX_H
+#define _ASM_M68KNOMMU_TIMEX_H
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE MCF_CLK
+#else
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+#endif
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+#endif
--- /dev/null
+#ifndef _M68K_TLB_H
+#define _M68K_TLB_H
+
+/*
+ * m68k doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _M68K_TLB_H */
--- /dev/null
+#ifdef __uClinux__
+#include "tlbflush_no.h"
+#else
+#include "tlbflush_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_TLBFLUSH_H
+#define _M68K_TLBFLUSH_H
+
+
+#ifndef CONFIG_SUN3
+
+#include <asm/current.h>
+
+static inline void flush_tlb_kernel_page(void *addr)
+{
+ if (CPU_IS_040_OR_060) {
+ mm_segment_t old_fs = get_fs();
+ set_fs(KERNEL_DS);
+ __asm__ __volatile__(".chip 68040\n\t"
+ "pflush (%0)\n\t"
+ ".chip 68k"
+ : : "a" (addr));
+ set_fs(old_fs);
+ } else if (CPU_IS_020_OR_030)
+ __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr));
+}
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+ if (CPU_IS_040_OR_060)
+ __asm__ __volatile__(".chip 68040\n\t"
+ "pflushan\n\t"
+ ".chip 68k");
+ else if (CPU_IS_020_OR_030)
+ __asm__ __volatile__("pflush #0,#4");
+}
+
+static inline void __flush_tlb040_one(unsigned long addr)
+{
+ __asm__ __volatile__(".chip 68040\n\t"
+ "pflush (%0)\n\t"
+ ".chip 68k"
+ : : "a" (addr));
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+ if (CPU_IS_040_OR_060)
+ __flush_tlb040_one(addr);
+ else if (CPU_IS_020_OR_030)
+ __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+ if (CPU_IS_040_OR_060)
+ __asm__ __volatile__(".chip 68040\n\t"
+ "pflusha\n\t"
+ ".chip 68k");
+ else if (CPU_IS_020_OR_030)
+ __asm__ __volatile__("pflusha");
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+ if (mm == current->active_mm)
+ __flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ if (vma->vm_mm == current->active_mm) {
+ mm_segment_t old_fs = get_fs();
+ set_fs(USER_DS);
+ __flush_tlb_one(addr);
+ set_fs(old_fs);
+ }
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ if (vma->vm_mm == current->active_mm)
+ __flush_tlb();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ flush_tlb_all();
+}
+
+#else
+
+
+/* Reserved PMEGs. */
+extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
+extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM];
+extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM];
+extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM];
+
+/* Flush all userspace mappings one by one... (why no flush command,
+ sun?) */
+static inline void flush_tlb_all(void)
+{
+ unsigned long addr;
+ unsigned char ctx, oldctx;
+
+ oldctx = sun3_get_context();
+ for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) {
+ for(ctx = 0; ctx < 8; ctx++) {
+ sun3_put_context(ctx);
+ sun3_put_segmap(addr, SUN3_INVALID_PMEG);
+ }
+ }
+
+ sun3_put_context(oldctx);
+ /* erase all of the userspace pmeg maps, we've clobbered them
+ all anyway */
+ for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) {
+ if(pmeg_alloc[addr] == 1) {
+ pmeg_alloc[addr] = 0;
+ pmeg_ctx[addr] = 0;
+ pmeg_vaddr[addr] = 0;
+ }
+ }
+
+}
+
+/* Clear user TLB entries within the context named in mm */
+static inline void flush_tlb_mm (struct mm_struct *mm)
+{
+ unsigned char oldctx;
+ unsigned char seg;
+ unsigned long i;
+
+ oldctx = sun3_get_context();
+ sun3_put_context(mm->context);
+
+ for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) {
+ seg = sun3_get_segmap(i);
+ if(seg == SUN3_INVALID_PMEG)
+ continue;
+
+ sun3_put_segmap(i, SUN3_INVALID_PMEG);
+ pmeg_alloc[seg] = 0;
+ pmeg_ctx[seg] = 0;
+ pmeg_vaddr[seg] = 0;
+ }
+
+ sun3_put_context(oldctx);
+
+}
+
+/* Flush a single TLB page. In this case, we're limited to flushing a
+ single PMEG */
+static inline void flush_tlb_page (struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ unsigned char oldctx;
+ unsigned char i;
+
+ oldctx = sun3_get_context();
+ sun3_put_context(vma->vm_mm->context);
+ addr &= ~SUN3_PMEG_MASK;
+ if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG)
+ {
+ pmeg_alloc[i] = 0;
+ pmeg_ctx[i] = 0;
+ pmeg_vaddr[i] = 0;
+ sun3_put_segmap (addr, SUN3_INVALID_PMEG);
+ }
+ sun3_put_context(oldctx);
+
+}
+/* Flush a range of pages from TLB. */
+
+static inline void flush_tlb_range (struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ unsigned char seg, oldctx;
+
+ start &= ~SUN3_PMEG_MASK;
+
+ oldctx = sun3_get_context();
+ sun3_put_context(mm->context);
+
+ while(start < end)
+ {
+ if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG)
+ goto next;
+ if(pmeg_ctx[seg] == mm->context) {
+ pmeg_alloc[seg] = 0;
+ pmeg_ctx[seg] = 0;
+ pmeg_vaddr[seg] = 0;
+ }
+ sun3_put_segmap(start, SUN3_INVALID_PMEG);
+ next:
+ start += SUN3_PMEG_SIZE;
+ }
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ flush_tlb_all();
+}
+
+/* Flush kernel page from TLB. */
+static inline void flush_tlb_kernel_page (unsigned long addr)
+{
+ sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
+}
+
+#endif
+
+#endif /* _M68K_TLBFLUSH_H */
--- /dev/null
+#ifndef _M68KNOMMU_TLBFLUSH_H
+#define _M68KNOMMU_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+ BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+ BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+ BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+ BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+ BUG();
+}
+
+#endif /* _M68KNOMMU_TLBFLUSH_H */
--- /dev/null
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
--- /dev/null
+#ifdef __uClinux__
+#include "traps_no.h"
+#else
+#include "traps_mm.h"
+#endif
--- /dev/null
+/*
+ * linux/include/asm/traps.h
+ *
+ * Copyright (C) 1993 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68K_TRAPS_H
+#define _M68K_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+typedef void (*e_vector)(void);
+
+asmlinkage void auto_inthandler(void);
+asmlinkage void user_inthandler(void);
+asmlinkage void bad_inthandler(void);
+
+extern e_vector vectors[];
+
+#endif
+
+#define VEC_RESETSP (0)
+#define VEC_RESETPC (1)
+#define VEC_BUSERR (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK (6)
+#define VEC_TRAP (7)
+#define VEC_PRIV (8)
+#define VEC_TRACE (9)
+#define VEC_LINE10 (10)
+#define VEC_LINE11 (11)
+#define VEC_RESV12 (12)
+#define VEC_COPROC (13)
+#define VEC_FORMAT (14)
+#define VEC_UNINT (15)
+#define VEC_RESV16 (16)
+#define VEC_RESV17 (17)
+#define VEC_RESV18 (18)
+#define VEC_RESV19 (19)
+#define VEC_RESV20 (20)
+#define VEC_RESV21 (21)
+#define VEC_RESV22 (22)
+#define VEC_RESV23 (23)
+#define VEC_SPUR (24)
+#define VEC_INT1 (25)
+#define VEC_INT2 (26)
+#define VEC_INT3 (27)
+#define VEC_INT4 (28)
+#define VEC_INT5 (29)
+#define VEC_INT6 (30)
+#define VEC_INT7 (31)
+#define VEC_SYS (32)
+#define VEC_TRAP1 (33)
+#define VEC_TRAP2 (34)
+#define VEC_TRAP3 (35)
+#define VEC_TRAP4 (36)
+#define VEC_TRAP5 (37)
+#define VEC_TRAP6 (38)
+#define VEC_TRAP7 (39)
+#define VEC_TRAP8 (40)
+#define VEC_TRAP9 (41)
+#define VEC_TRAP10 (42)
+#define VEC_TRAP11 (43)
+#define VEC_TRAP12 (44)
+#define VEC_TRAP13 (45)
+#define VEC_TRAP14 (46)
+#define VEC_TRAP15 (47)
+#define VEC_FPBRUC (48)
+#define VEC_FPIR (49)
+#define VEC_FPDIVZ (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE (52)
+#define VEC_FPOVER (53)
+#define VEC_FPNAN (54)
+#define VEC_FPUNSUP (55)
+#define VEC_MMUCFG (56)
+#define VEC_MMUILL (57)
+#define VEC_MMUACC (58)
+#define VEC_RESV59 (59)
+#define VEC_UNIMPEA (60)
+#define VEC_UNIMPII (61)
+#define VEC_RESV62 (62)
+#define VEC_RESV63 (63)
+#define VEC_USER (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T (0x8000)
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#define PS_C (0x0001)
+
+/* bits for 68020/68030 special status word */
+
+#define FC (0x8000)
+#define FB (0x4000)
+#define RC (0x2000)
+#define RB (0x1000)
+#define DF (0x0100)
+#define RM (0x0080)
+#define RW (0x0040)
+#define SZ (0x0030)
+#define DFC (0x0007)
+
+/* bits for 68030 MMU status register (mmusr,psr) */
+
+#define MMU_B (0x8000) /* bus error */
+#define MMU_L (0x4000) /* limit violation */
+#define MMU_S (0x2000) /* supervisor violation */
+#define MMU_WP (0x0800) /* write-protected */
+#define MMU_I (0x0400) /* invalid descriptor */
+#define MMU_M (0x0200) /* ATC entry modified */
+#define MMU_T (0x0040) /* transparent translation */
+#define MMU_NUM (0x0007) /* number of levels traversed */
+
+
+/* bits for 68040 special status word */
+#define CP_040 (0x8000)
+#define CU_040 (0x4000)
+#define CT_040 (0x2000)
+#define CM_040 (0x1000)
+#define MA_040 (0x0800)
+#define ATC_040 (0x0400)
+#define LK_040 (0x0200)
+#define RW_040 (0x0100)
+#define SIZ_040 (0x0060)
+#define TT_040 (0x0018)
+#define TM_040 (0x0007)
+
+/* bits for 68040 write back status word */
+#define WBV_040 (0x80)
+#define WBSIZ_040 (0x60)
+#define WBBYT_040 (0x20)
+#define WBWRD_040 (0x40)
+#define WBLNG_040 (0x00)
+#define WBTT_040 (0x18)
+#define WBTM_040 (0x07)
+
+/* bus access size codes */
+#define BA_SIZE_BYTE (0x20)
+#define BA_SIZE_WORD (0x40)
+#define BA_SIZE_LONG (0x00)
+#define BA_SIZE_LINE (0x60)
+
+/* bus access transfer type codes */
+#define BA_TT_MOVE16 (0x08)
+
+/* bits for 68040 MMU status register (mmusr) */
+#define MMU_B_040 (0x0800)
+#define MMU_G_040 (0x0400)
+#define MMU_S_040 (0x0080)
+#define MMU_CM_040 (0x0060)
+#define MMU_M_040 (0x0010)
+#define MMU_WP_040 (0x0004)
+#define MMU_T_040 (0x0002)
+#define MMU_R_040 (0x0001)
+
+/* bits in the 68060 fault status long word (FSLW) */
+#define MMU060_MA (0x08000000) /* misaligned */
+#define MMU060_LK (0x02000000) /* locked transfer */
+#define MMU060_RW (0x01800000) /* read/write */
+# define MMU060_RW_W (0x00800000) /* write */
+# define MMU060_RW_R (0x01000000) /* read */
+# define MMU060_RW_RMW (0x01800000) /* read/modify/write */
+# define MMU060_W (0x00800000) /* general write, includes rmw */
+#define MMU060_SIZ (0x00600000) /* transfer size */
+#define MMU060_TT (0x00180000) /* transfer type (TT) bits */
+#define MMU060_TM (0x00070000) /* transfer modifier (TM) bits */
+#define MMU060_IO (0x00008000) /* instruction or operand */
+#define MMU060_PBE (0x00004000) /* push buffer bus error */
+#define MMU060_SBE (0x00002000) /* store buffer bus error */
+#define MMU060_PTA (0x00001000) /* pointer A fault */
+#define MMU060_PTB (0x00000800) /* pointer B fault */
+#define MMU060_IL (0x00000400) /* double indirect descr fault */
+#define MMU060_PF (0x00000200) /* page fault (invalid descr) */
+#define MMU060_SP (0x00000100) /* supervisor protection */
+#define MMU060_WP (0x00000080) /* write protection */
+#define MMU060_TWE (0x00000040) /* bus error on table search */
+#define MMU060_RE (0x00000020) /* bus error on read */
+#define MMU060_WE (0x00000010) /* bus error on write */
+#define MMU060_TTR (0x00000008) /* error caused by TTR translation */
+#define MMU060_BPE (0x00000004) /* branch prediction error */
+#define MMU060_SEE (0x00000001) /* software emulated error */
+
+/* cases of missing or invalid descriptors */
+#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \
+ MMU060_IL | MMU060_PF)
+/* bits that indicate real errors */
+#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \
+ MMU060_WP | MMU060_TWE | MMU060_RE | MMU060_WE)
+
+/* structure for stack frames */
+
+struct frame {
+ struct pt_regs ptregs;
+ union {
+ struct {
+ unsigned long iaddr; /* instruction address */
+ } fmt2;
+ struct {
+ unsigned long effaddr; /* effective address */
+ } fmt3;
+ struct {
+ unsigned long effaddr; /* effective address */
+ unsigned long pc; /* pc of faulted instr */
+ } fmt4;
+ struct {
+ unsigned long effaddr; /* effective address */
+ unsigned short ssw; /* special status word */
+ unsigned short wb3s; /* write back 3 status */
+ unsigned short wb2s; /* write back 2 status */
+ unsigned short wb1s; /* write back 1 status */
+ unsigned long faddr; /* fault address */
+ unsigned long wb3a; /* write back 3 address */
+ unsigned long wb3d; /* write back 3 data */
+ unsigned long wb2a; /* write back 2 address */
+ unsigned long wb2d; /* write back 2 data */
+ unsigned long wb1a; /* write back 1 address */
+ unsigned long wb1dpd0; /* write back 1 data/push data 0*/
+ unsigned long pd1; /* push data 1*/
+ unsigned long pd2; /* push data 2*/
+ unsigned long pd3; /* push data 3*/
+ } fmt7;
+ struct {
+ unsigned long iaddr; /* instruction address */
+ unsigned short int1[4]; /* internal registers */
+ } fmt9;
+ struct {
+ unsigned short int1;
+ unsigned short ssw; /* special status word */
+ unsigned short isc; /* instruction stage c */
+ unsigned short isb; /* instruction stage b */
+ unsigned long daddr; /* data cycle fault address */
+ unsigned short int2[2];
+ unsigned long dobuf; /* data cycle output buffer */
+ unsigned short int3[2];
+ } fmta;
+ struct {
+ unsigned short int1;
+ unsigned short ssw; /* special status word */
+ unsigned short isc; /* instruction stage c */
+ unsigned short isb; /* instruction stage b */
+ unsigned long daddr; /* data cycle fault address */
+ unsigned short int2[2];
+ unsigned long dobuf; /* data cycle output buffer */
+ unsigned short int3[4];
+ unsigned long baddr; /* stage B address */
+ unsigned short int4[2];
+ unsigned long dibuf; /* data cycle input buffer */
+ unsigned short int5[3];
+ unsigned ver : 4; /* stack frame version # */
+ unsigned int6:12;
+ unsigned short int7[18];
+ } fmtb;
+ } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_TRAPS_H */
--- /dev/null
+/*
+ * linux/include/asm/traps.h
+ *
+ * Copyright (C) 1993 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68KNOMMU_TRAPS_H
+#define _M68KNOMMU_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+extern void init_vectors(void);
+extern void enable_vector(unsigned int irq);
+extern void disable_vector(unsigned int irq);
+extern void ack_vector(unsigned int irq);
+
+#endif
+
+#define VEC_BUSERR (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK (6)
+#define VEC_TRAP (7)
+#define VEC_PRIV (8)
+#define VEC_TRACE (9)
+#define VEC_LINE10 (10)
+#define VEC_LINE11 (11)
+#define VEC_RESV1 (12)
+#define VEC_COPROC (13)
+#define VEC_FORMAT (14)
+#define VEC_UNINT (15)
+#define VEC_SPUR (24)
+#define VEC_INT1 (25)
+#define VEC_INT2 (26)
+#define VEC_INT3 (27)
+#define VEC_INT4 (28)
+#define VEC_INT5 (29)
+#define VEC_INT6 (30)
+#define VEC_INT7 (31)
+#define VEC_SYS (32)
+#define VEC_TRAP1 (33)
+#define VEC_TRAP2 (34)
+#define VEC_TRAP3 (35)
+#define VEC_TRAP4 (36)
+#define VEC_TRAP5 (37)
+#define VEC_TRAP6 (38)
+#define VEC_TRAP7 (39)
+#define VEC_TRAP8 (40)
+#define VEC_TRAP9 (41)
+#define VEC_TRAP10 (42)
+#define VEC_TRAP11 (43)
+#define VEC_TRAP12 (44)
+#define VEC_TRAP13 (45)
+#define VEC_TRAP14 (46)
+#define VEC_TRAP15 (47)
+#define VEC_FPBRUC (48)
+#define VEC_FPIR (49)
+#define VEC_FPDIVZ (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE (52)
+#define VEC_FPOVER (53)
+#define VEC_FPNAN (54)
+#define VEC_FPUNSUP (55)
+#define VEC_UNIMPEA (60)
+#define VEC_UNIMPII (61)
+#define VEC_USER (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T (0x8000)
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#define PS_C (0x0001)
+
+/* structure for stack frames */
+
+struct frame {
+ struct pt_regs ptregs;
+ union {
+ struct {
+ unsigned long iaddr; /* instruction address */
+ } fmt2;
+ struct {
+ unsigned long effaddr; /* effective address */
+ } fmt3;
+ struct {
+ unsigned long effaddr; /* effective address */
+ unsigned long pc; /* pc of faulted instr */
+ } fmt4;
+ struct {
+ unsigned long effaddr; /* effective address */
+ unsigned short ssw; /* special status word */
+ unsigned short wb3s; /* write back 3 status */
+ unsigned short wb2s; /* write back 2 status */
+ unsigned short wb1s; /* write back 1 status */
+ unsigned long faddr; /* fault address */
+ unsigned long wb3a; /* write back 3 address */
+ unsigned long wb3d; /* write back 3 data */
+ unsigned long wb2a; /* write back 2 address */
+ unsigned long wb2d; /* write back 2 data */
+ unsigned long wb1a; /* write back 1 address */
+ unsigned long wb1dpd0; /* write back 1 data/push data 0*/
+ unsigned long pd1; /* push data 1*/
+ unsigned long pd2; /* push data 2*/
+ unsigned long pd3; /* push data 3*/
+ } fmt7;
+ struct {
+ unsigned long iaddr; /* instruction address */
+ unsigned short int1[4]; /* internal registers */
+ } fmt9;
+ struct {
+ unsigned short int1;
+ unsigned short ssw; /* special status word */
+ unsigned short isc; /* instruction stage c */
+ unsigned short isb; /* instruction stage b */
+ unsigned long daddr; /* data cycle fault address */
+ unsigned short int2[2];
+ unsigned long dobuf; /* data cycle output buffer */
+ unsigned short int3[2];
+ } fmta;
+ struct {
+ unsigned short int1;
+ unsigned short ssw; /* special status word */
+ unsigned short isc; /* instruction stage c */
+ unsigned short isb; /* instruction stage b */
+ unsigned long daddr; /* data cycle fault address */
+ unsigned short int2[2];
+ unsigned long dobuf; /* data cycle output buffer */
+ unsigned short int3[4];
+ unsigned long baddr; /* stage B address */
+ unsigned short int4[2];
+ unsigned long dibuf; /* data cycle input buffer */
+ unsigned short int5[3];
+ unsigned ver : 4; /* stack frame version # */
+ unsigned int6:12;
+ unsigned short int7[18];
+ } fmtb;
+ } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68KNOMMU_TRAPS_H */
--- /dev/null
+#ifndef _M68K_TYPES_H
+#define _M68K_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* DMA addresses are always 32-bits wide */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_TYPES_H */
--- /dev/null
+#ifdef __uClinux__
+#include "uaccess_no.h"
+#else
+#include "uaccess_mm.h"
+#endif
--- /dev/null
+#ifndef __M68K_UACCESS_H
+#define __M68K_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/* We let the MMU do all checking */
+static inline int access_ok(int type, const void __user *addr,
+ unsigned long size)
+{
+ return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+extern int __put_user_bad(void);
+extern int __get_user_bad(void);
+
+#define __put_user_asm(res, x, ptr, bwl, reg, err) \
+asm volatile ("\n" \
+ "1: moves."#bwl" %2,%1\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .even\n" \
+ "10: moveq.l %3,%0\n" \
+ " jra 2b\n" \
+ " .previous\n" \
+ "\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 1b,10b\n" \
+ " .long 2b,10b\n" \
+ " .previous" \
+ : "+d" (res), "=m" (*(ptr)) \
+ : #reg (x), "i" (err))
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define __put_user(x, ptr) \
+({ \
+ typeof(*(ptr)) __pu_val = (x); \
+ int __pu_err = 0; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof (*(ptr))) { \
+ case 1: \
+ __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \
+ break; \
+ case 2: \
+ __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \
+ break; \
+ case 4: \
+ __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \
+ break; \
+ case 8: \
+ { \
+ const void __user *__pu_ptr = (ptr); \
+ asm volatile ("\n" \
+ "1: moves.l %2,(%1)+\n" \
+ "2: moves.l %R2,(%1)\n" \
+ "3:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .even\n" \
+ "10: movel %3,%0\n" \
+ " jra 3b\n" \
+ " .previous\n" \
+ "\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 1b,10b\n" \
+ " .long 2b,10b\n" \
+ " .long 3b,10b\n" \
+ " .previous" \
+ : "+d" (__pu_err), "+a" (__pu_ptr) \
+ : "r" (__pu_val), "i" (-EFAULT) \
+ : "memory"); \
+ break; \
+ } \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+#define put_user(x, ptr) __put_user(x, ptr)
+
+
+#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \
+ type __gu_val; \
+ asm volatile ("\n" \
+ "1: moves."#bwl" %2,%1\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .even\n" \
+ "10: move.l %3,%0\n" \
+ " sub."#bwl" %1,%1\n" \
+ " jra 2b\n" \
+ " .previous\n" \
+ "\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 1b,10b\n" \
+ " .previous" \
+ : "+d" (res), "=&" #reg (__gu_val) \
+ : "m" (*(ptr)), "i" (err)); \
+ (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \
+})
+
+#define __get_user(x, ptr) \
+({ \
+ int __gu_err = 0; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \
+ break; \
+ case 2: \
+ __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \
+ break; \
+ case 4: \
+ __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \
+ break; \
+/* case 8: disabled because gcc-4.1 has a broken typeof \
+ { \
+ const void *__gu_ptr = (ptr); \
+ u64 __gu_val; \
+ asm volatile ("\n" \
+ "1: moves.l (%2)+,%1\n" \
+ "2: moves.l (%2),%R1\n" \
+ "3:\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .even\n" \
+ "10: move.l %3,%0\n" \
+ " sub.l %1,%1\n" \
+ " sub.l %R1,%R1\n" \
+ " jra 3b\n" \
+ " .previous\n" \
+ "\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 1b,10b\n" \
+ " .long 2b,10b\n" \
+ " .previous" \
+ : "+d" (__gu_err), "=&r" (__gu_val), \
+ "+a" (__gu_ptr) \
+ : "i" (-EFAULT) \
+ : "memory"); \
+ (x) = (typeof(*(ptr)))__gu_val; \
+ break; \
+ } */ \
+ default: \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ __gu_err; \
+})
+#define get_user(x, ptr) __get_user(x, ptr)
+
+unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n);
+unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n);
+
+#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
+ asm volatile ("\n" \
+ "1: moves."#s1" (%2)+,%3\n" \
+ " move."#s1" %3,(%1)+\n" \
+ "2: moves."#s2" (%2)+,%3\n" \
+ " move."#s2" %3,(%1)+\n" \
+ " .ifnc \""#s3"\",\"\"\n" \
+ "3: moves."#s3" (%2)+,%3\n" \
+ " move."#s3" %3,(%1)+\n" \
+ " .endif\n" \
+ "4:\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 1b,10f\n" \
+ " .long 2b,20f\n" \
+ " .ifnc \""#s3"\",\"\"\n" \
+ " .long 3b,30f\n" \
+ " .endif\n" \
+ " .previous\n" \
+ "\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .even\n" \
+ "10: clr."#s1" (%1)+\n" \
+ "20: clr."#s2" (%1)+\n" \
+ " .ifnc \""#s3"\",\"\"\n" \
+ "30: clr."#s3" (%1)+\n" \
+ " .endif\n" \
+ " moveq.l #"#n",%0\n" \
+ " jra 4b\n" \
+ " .previous\n" \
+ : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \
+ : : "memory")
+
+static __always_inline unsigned long
+__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ unsigned long res = 0, tmp;
+
+ switch (n) {
+ case 1:
+ __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
+ break;
+ case 2:
+ __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2);
+ break;
+ case 3:
+ __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
+ break;
+ case 4:
+ __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4);
+ break;
+ case 5:
+ __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
+ break;
+ case 6:
+ __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
+ break;
+ case 7:
+ __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
+ break;
+ case 8:
+ __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
+ break;
+ case 9:
+ __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
+ break;
+ case 10:
+ __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
+ break;
+ case 12:
+ __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
+ break;
+ default:
+ /* we limit the inlined version to 3 moves */
+ return __generic_copy_from_user(to, from, n);
+ }
+
+ return res;
+}
+
+#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \
+ asm volatile ("\n" \
+ " move."#s1" (%2)+,%3\n" \
+ "11: moves."#s1" %3,(%1)+\n" \
+ "12: move."#s2" (%2)+,%3\n" \
+ "21: moves."#s2" %3,(%1)+\n" \
+ "22:\n" \
+ " .ifnc \""#s3"\",\"\"\n" \
+ " move."#s3" (%2)+,%3\n" \
+ "31: moves."#s3" %3,(%1)+\n" \
+ "32:\n" \
+ " .endif\n" \
+ "4:\n" \
+ "\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 4\n" \
+ " .long 11b,5f\n" \
+ " .long 12b,5f\n" \
+ " .long 21b,5f\n" \
+ " .long 22b,5f\n" \
+ " .ifnc \""#s3"\",\"\"\n" \
+ " .long 31b,5f\n" \
+ " .long 32b,5f\n" \
+ " .endif\n" \
+ " .previous\n" \
+ "\n" \
+ " .section .fixup,\"ax\"\n" \
+ " .even\n" \
+ "5: moveq.l #"#n",%0\n" \
+ " jra 4b\n" \
+ " .previous\n" \
+ : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \
+ : : "memory")
+
+static __always_inline unsigned long
+__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ unsigned long res = 0, tmp;
+
+ switch (n) {
+ case 1:
+ __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1);
+ break;
+ case 2:
+ __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2);
+ break;
+ case 3:
+ __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,);
+ break;
+ case 4:
+ __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4);
+ break;
+ case 5:
+ __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,);
+ break;
+ case 6:
+ __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,);
+ break;
+ case 7:
+ __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b);
+ break;
+ case 8:
+ __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,);
+ break;
+ case 9:
+ __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b);
+ break;
+ case 10:
+ __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w);
+ break;
+ case 12:
+ __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l);
+ break;
+ default:
+ /* limit the inlined version to 3 moves */
+ return __generic_copy_to_user(to, from, n);
+ }
+
+ return res;
+}
+
+#define __copy_from_user(to, from, n) \
+(__builtin_constant_p(n) ? \
+ __constant_copy_from_user(to, from, n) : \
+ __generic_copy_from_user(to, from, n))
+
+#define __copy_to_user(to, from, n) \
+(__builtin_constant_p(n) ? \
+ __constant_copy_to_user(to, from, n) : \
+ __generic_copy_to_user(to, from, n))
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_from_user(to, from, n) __copy_from_user(to, from, n)
+#define copy_to_user(to, from, n) __copy_to_user(to, from, n)
+
+long strncpy_from_user(char *dst, const char __user *src, long count);
+long strnlen_user(const char __user *src, long n);
+unsigned long __clear_user(void __user *to, unsigned long n);
+
+#define clear_user __clear_user
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+#endif /* _M68K_UACCESS_H */
--- /dev/null
+#ifndef __M68KNOMMU_UACCESS_H
+#define __M68KNOMMU_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
+
+/*
+ * It is not enough to just have access_ok check for a real RAM address.
+ * This would disallow the case of code/ro-data running XIP in flash/rom.
+ * Ideally we would check the possible flash ranges too, but that is
+ * currently not so easy.
+ */
+static inline int _access_ok(unsigned long addr, unsigned long size)
+{
+ return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr) \
+({ \
+ int __pu_err = 0; \
+ typeof(*(ptr)) __pu_val = (x); \
+ switch (sizeof (*(ptr))) { \
+ case 1: \
+ __put_user_asm(__pu_err, __pu_val, ptr, b); \
+ break; \
+ case 2: \
+ __put_user_asm(__pu_err, __pu_val, ptr, w); \
+ break; \
+ case 4: \
+ __put_user_asm(__pu_err, __pu_val, ptr, l); \
+ break; \
+ case 8: \
+ memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(err,x,ptr,bwl) \
+ __asm__ ("move" #bwl " %0,%1" \
+ : /* no outputs */ \
+ :"d" (x),"m" (*__ptr(ptr)) : "memory")
+
+#define get_user(x, ptr) \
+({ \
+ int __gu_err = 0; \
+ typeof(x) __gu_val = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \
+ break; \
+ case 2: \
+ __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \
+ break; \
+ case 4: \
+ __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \
+ break; \
+ case 8: \
+ memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \
+ break; \
+ default: \
+ __gu_val = 0; \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ (x) = (typeof(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg) \
+ __asm__ ("move" #bwl " %1,%0" \
+ : "=d" (x) \
+ : "m" (*__ptr(ptr)))
+
+#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+ char *tmp;
+ strncpy(dst, src, count);
+ for (tmp = dst; *tmp && count > 0; tmp++, count--)
+ ;
+ return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+ return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+__clear_user(void *to, unsigned long n)
+{
+ memset(to, 0, n);
+ return 0;
+}
+
+#define clear_user(to,n) __clear_user(to,n)
+
+#endif /* _M68KNOMMU_UACCESS_H */
--- /dev/null
+#ifdef __uClinux__
+#include "ucontext_no.h"
+#else
+#include "ucontext_mm.h"
+#endif
--- /dev/null
+#ifndef _M68K_UCONTEXT_H
+#define _M68K_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+ int f_fpcntl[3];
+ int f_fpregs[8*3];
+} fpregset_t;
+
+struct mcontext {
+ int version;
+ gregset_t gregs;
+ fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct mcontext uc_mcontext;
+ unsigned long uc_filler[80];
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_UCONTEXT_H
+#define _M68KNOMMU_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+ int f_pcr;
+ int f_psr;
+ int f_fpiaddr;
+ int f_fpregs[8][3];
+} fpregset_t;
+
+struct mcontext {
+ int version;
+ gregset_t gregs;
+ fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct mcontext uc_mcontext;
+ unsigned long uc_filler[80];
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif
--- /dev/null
+#ifdef __uClinux__
+#include "unaligned_no.h"
+#else
+#include "unaligned_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_M68K_UNALIGNED_H
+#define _ASM_M68K_UNALIGNED_H
+
+/*
+ * The m68k can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif /* _ASM_M68K_UNALIGNED_H */
--- /dev/null
+#ifndef _ASM_M68KNOMMU_UNALIGNED_H
+#define _ASM_M68KNOMMU_UNALIGNED_H
+
+
+#ifdef CONFIG_COLDFIRE
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#else
+/*
+ * The m68k can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif
+
+#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
--- /dev/null
+#ifdef __uClinux__
+#include "unistd_no.h"
+#else
+#include "unistd_mm.h"
+#endif
--- /dev/null
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+#define __NR_idle /* 112 */ Obsolete
+#define __NR_vm86 /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+#define __NR_vserver 278
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+#define __NR_signalfd4 323
+#define __NR_eventfd2 324
+#define __NR_epoll_create1 325
+#define __NR_dup3 326
+#define __NR_pipe2 327
+#define __NR_inotify_init1 328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
--- /dev/null
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+#define __NR_idle /* 112 */ Obsolete
+#define __NR_vm86 /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+#define __NR_vserver 278
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+#define __NR_signalfd4 323
+#define __NR_eventfd2 324
+#define __NR_epoll_create1 325
+#define __NR_dup3 326
+#define __NR_pipe2 327
+#define __NR_inotify_init1 328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
--- /dev/null
+#ifndef _M68K_USER_H
+#define _M68K_USER_H
+
+/* Core file format: The core file is written in such a way that gdb
+ can understand it and provide useful information to the user (under
+ linux we use the 'trad-core' bfd). There are quite a number of
+ obstacles to being able to view the contents of the floating point
+ registers, and until these are solved you will not be able to view the
+ contents of them. Actually, you can read in the core file and look at
+ the contents of the user struct to find out what the floating point
+ registers contain.
+ The actual file contents are as follows:
+ UPAGE: 1 page consisting of a user struct that tells gdb what is present
+ in the file. Directly after this is a copy of the task_struct, which
+ is currently not used by gdb, but it may come in useful at some point.
+ All of the registers are stored as part of the upage. The upage should
+ always be only one page.
+ DATA: The data area is stored. We use current->end_text to
+ current->brk to pick up all of the user variables, plus any memory
+ that may have been malloced. No attempt is made to determine if a page
+ is demand-zero or if a page is totally unused, we just cover the entire
+ range. All of the addresses are rounded in such a way that an integral
+ number of pages is written.
+ STACK: We need the stack information in order to get a meaningful
+ backtrace. We need to write the data from (esp) to
+ current->start_stack, so we round each of these off in order to be able
+ to write an integer number of pages.
+ The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_m68kfp_struct {
+ unsigned long fpregs[8*3]; /* fp0-fp7 registers */
+ unsigned long fpcntl[3]; /* fp control regs */
+};
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+ is still the layout used by user (the new pt_regs doesn't have
+ all registers). */
+struct user_regs_struct {
+ long d1,d2,d3,d4,d5,d6,d7;
+ long a0,a1,a2,a3,a4,a5,a6;
+ long d0;
+ long usp;
+ long orig_d0;
+ short stkadj;
+ short sr;
+ long pc;
+ short fmtvec;
+ short __fill;
+};
+
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ this will be used by gdb to figure out where the data and stack segments
+ are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+ from the ptrace(3,...) function. */
+ struct user_regs_struct regs; /* Where the registers are actually stored */
+/* ptrace does not yet supply these. Someday.... */
+ int u_fpvalid; /* True if math co-processor being used. */
+ /* for this mess. Not yet used. */
+ struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ unsigned long u_ar0; /* Used by gdb to help find the values for */
+ /* the registers. */
+ struct user_m68kfp_struct* u_fpstate; /* Math Co-processor pointer. */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#define NBPG 4096
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
--- /dev/null
+#ifndef __VIRT_CONVERT__
+#define __VIRT_CONVERT__
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/mmzone.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long virt_to_phys(void *address)
+{
+ return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+/* Permanent address of a page. */
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+#define page_to_phys(page) \
+ __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
+#else
+#define page_to_phys(_page) ({ \
+ struct page *__page = _page; \
+ struct pglist_data *pgdat; \
+ pgdat = pg_data_table[page_to_nid(__page)]; \
+ page_to_pfn(__page) << PAGE_SHIFT; \
+})
+#endif
+
+/*
+ * IO bus memory addresses are 1:1 with the physical address,
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#endif
+#endif
--- /dev/null
+#include <asm-generic/xor.h>
--- /dev/null
+#ifndef _ASM_M68K_ZORRO_H
+#define _ASM_M68K_ZORRO_H
+
+#include <asm/raw_io.h>
+
+#define z_readb raw_inb
+#define z_readw raw_inw
+#define z_readl raw_inl
+
+#define z_writeb raw_outb
+#define z_writew raw_outw
+#define z_writel raw_outl
+
+#define z_memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
+}
+
+static inline void __iomem *z_remap_writethrough(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void __iomem *z_remap_fullcache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define z_unmap iounmap
+#define z_iounmap iounmap
+#define z_ioremap z_remap_nocache_ser
+
+#endif /* _ASM_M68K_ZORRO_H */
bool
default n
+config NO_DMA
+ bool
+ default y
+
config FPU
bool
default n
help
Support for the Motorola M5307C3 board.
-config eLIA
- bool "Moreton Bay eLIA board support"
- depends on M5307
- help
- Support for the Moreton Bay eLIA board.
-
config SECUREEDGEMP3
bool "SnapGear SecureEdge/MP3 platform support"
depends on M5307
depends on !M5272
default y
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-config PCI
- bool "PCI support"
- help
- Support for PCI bus.
-
-config COMEMPCI
- bool "CO-MEM lite PCI controller support"
- depends on (M5307 || M5407)
-
-source "drivers/pci/Kconfig"
-
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
menu "Executable file formats"
source "fs/Kconfig.binfmt"
board-$(CONFIG_M5275EVB) := M5275EVB
board-$(CONFIG_M5282EVB) := M5282EVB
board-$(CONFIG_ELITE) := eLITE
-board-$(CONFIG_eLIA) := eLIA
board-$(CONFIG_NETtel) := NETtel
board-$(CONFIG_SECUREEDGEMP3) := MP3
board-$(CONFIG_CLEOPATRA) := CLEOPATRA
+++ /dev/null
-include include/asm-generic/Kbuild.asm
+++ /dev/null
-
-/* include/asm-m68knommu/MC68328.h: '328 control registers
- *
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68328_H_
-#define _MC68328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/**********
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
-
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR 0xfffff000
-#define SCR BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
-#define SCR_DMAP 0x04 /* Double Map */
-#define SCR_SO 0x08 /* Supervisor Only */
-#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
-#define SCR_PRV 0x20 /* Privilege Violation */
-#define SCR_WPV 0x40 /* Write Protect Violation */
-#define SCR_BETO 0x80 /* Bus-Error TimeOut */
-
-/*
- * Mask Revision Register
- */
-#define MRR_ADDR 0xfffff004
-#define MRR LONG_REF(MRR_ADDR)
-
-/**********
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * Group Base Address Registers
- */
-#define GRPBASEA_ADDR 0xfffff100
-#define GRPBASEB_ADDR 0xfffff102
-#define GRPBASEC_ADDR 0xfffff104
-#define GRPBASED_ADDR 0xfffff106
-
-#define GRPBASEA WORD_REF(GRPBASEA_ADDR)
-#define GRPBASEB WORD_REF(GRPBASEB_ADDR)
-#define GRPBASEC WORD_REF(GRPBASEC_ADDR)
-#define GRPBASED WORD_REF(GRPBASED_ADDR)
-
-#define GRPBASE_V 0x0001 /* Valid */
-#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */
-
-/*
- * Group Base Address Mask Registers
- */
-#define GRPMASKA_ADDR 0xfffff108
-#define GRPMASKB_ADDR 0xfffff10a
-#define GRPMASKC_ADDR 0xfffff10c
-#define GRPMASKD_ADDR 0xfffff10e
-
-#define GRPMASKA WORD_REF(GRPMASKA_ADDR)
-#define GRPMASKB WORD_REF(GRPMASKB_ADDR)
-#define GRPMASKC WORD_REF(GRPMASKC_ADDR)
-#define GRPMASKD WORD_REF(GRPMASKD_ADDR)
-
-#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */
-
-/*
- * Chip-Select Option Registers (group A)
- */
-#define CSA0_ADDR 0xfffff110
-#define CSA1_ADDR 0xfffff114
-#define CSA2_ADDR 0xfffff118
-#define CSA3_ADDR 0xfffff11c
-
-#define CSA0 LONG_REF(CSA0_ADDR)
-#define CSA1 LONG_REF(CSA1_ADDR)
-#define CSA2 LONG_REF(CSA2_ADDR)
-#define CSA3 LONG_REF(CSA3_ADDR)
-
-#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSA_WAIT_SHIFT 0
-#define CSA_RO 0x00000008 /* Read-Only */
-#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
-#define CSA_AM_SHIFT 8
-#define CSA_BUSW 0x00010000 /* Bus Width Select */
-#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
-#define CSA_AC_SHIFT 24
-
-/*
- * Chip-Select Option Registers (group B)
- */
-#define CSB0_ADDR 0xfffff120
-#define CSB1_ADDR 0xfffff124
-#define CSB2_ADDR 0xfffff128
-#define CSB3_ADDR 0xfffff12c
-
-#define CSB0 LONG_REF(CSB0_ADDR)
-#define CSB1 LONG_REF(CSB1_ADDR)
-#define CSB2 LONG_REF(CSB2_ADDR)
-#define CSB3 LONG_REF(CSB3_ADDR)
-
-#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSB_WAIT_SHIFT 0
-#define CSB_RO 0x00000008 /* Read-Only */
-#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
-#define CSB_AM_SHIFT 8
-#define CSB_BUSW 0x00010000 /* Bus Width Select */
-#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
-#define CSB_AC_SHIFT 24
-
-/*
- * Chip-Select Option Registers (group C)
- */
-#define CSC0_ADDR 0xfffff130
-#define CSC1_ADDR 0xfffff134
-#define CSC2_ADDR 0xfffff138
-#define CSC3_ADDR 0xfffff13c
-
-#define CSC0 LONG_REF(CSC0_ADDR)
-#define CSC1 LONG_REF(CSC1_ADDR)
-#define CSC2 LONG_REF(CSC2_ADDR)
-#define CSC3 LONG_REF(CSC3_ADDR)
-
-#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSC_WAIT_SHIFT 0
-#define CSC_RO 0x00000008 /* Read-Only */
-#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
-#define CSC_AM_SHIFT 4
-#define CSC_BUSW 0x00010000 /* Bus Width Select */
-#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
-#define CSC_AC_SHIFT 20
-
-/*
- * Chip-Select Option Registers (group D)
- */
-#define CSD0_ADDR 0xfffff140
-#define CSD1_ADDR 0xfffff144
-#define CSD2_ADDR 0xfffff148
-#define CSD3_ADDR 0xfffff14c
-
-#define CSD0 LONG_REF(CSD0_ADDR)
-#define CSD1 LONG_REF(CSD1_ADDR)
-#define CSD2 LONG_REF(CSD2_ADDR)
-#define CSD3 LONG_REF(CSD3_ADDR)
-
-#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSD_WAIT_SHIFT 0
-#define CSD_RO 0x00000008 /* Read-Only */
-#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
-#define CSD_AM_SHIFT 4
-#define CSD_BUSW 0x00010000 /* Bus Width Select */
-#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
-#define CSD_AC_SHIFT 20
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register
- */
-#define PLLCR_ADDR 0xfffff200
-#define PLLCR WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL 0x0008 /* Disable PLL */
-#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
-#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
-#define PLLCR_PIXCLK_SEL_SHIFT 11
-
-/* 'EZ328-compatible definitions */
-#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK
-#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR 0xfffff202
-#define PLLFSR WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK 0x00ff /* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT 0x4000 /* Protect P & Q */
-#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR 0xfffff207
-#define PCTRL BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT 0
-#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */
-#define PCTRL_PCEN 0x80 /* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/*
- * Interrupt Vector Register
- */
-#define IVR_ADDR 0xfffff300
-#define IVR BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADRR 0xfffff302
-#define ICR WORD_REF(ICR_ADDR)
-
-#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
-#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
-#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
-#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
-#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
-#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
-#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
-#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR 0xfffff304
-#define IMR LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */
-#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */
-#define UART_IRQ_NUM 2 /* UART interrupt */
-#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM 4 /* RTC interrupt */
-#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
-#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
-#define INT0_IRQ_NUM 8 /* External INT0 */
-#define INT1_IRQ_NUM 9 /* External INT1 */
-#define INT2_IRQ_NUM 10 /* External INT2 */
-#define INT3_IRQ_NUM 11 /* External INT3 */
-#define INT4_IRQ_NUM 12 /* External INT4 */
-#define INT5_IRQ_NUM 13 /* External INT5 */
-#define INT6_IRQ_NUM 14 /* External INT6 */
-#define INT7_IRQ_NUM 15 /* External INT7 */
-#define IRQ1_IRQ_NUM 16 /* IRQ1 */
-#define IRQ2_IRQ_NUM 17 /* IRQ2 */
-#define IRQ3_IRQ_NUM 18 /* IRQ3 */
-#define IRQ6_IRQ_NUM 19 /* IRQ6 */
-#define PEN_IRQ_NUM 20 /* Pen Interrupt */
-#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */
-#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */
-#define IRQ7_IRQ_NUM 23 /* IRQ7 */
-
-/* '328-compatible definitions */
-#define SPI_IRQ_NUM SPIM_IRQ_NUM
-#define TMR_IRQ_NUM TMR1_IRQ_NUM
-
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
-#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
-#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
-#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
-#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
-#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
-#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
-#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
-#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
-#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
-#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
-#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */
-#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */
-#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */
-#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */
-#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
-#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
-#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
-#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
-#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */
-#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */
-#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */
-#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IMR_MSPI IMR_MSPIM
-#define IMR_MTMR IMR_MTMR1
-
-/*
- * Interrupt Wake-Up Enable Register
- */
-#define IWR_ADDR 0xfffff308
-#define IWR LONG_REF(IWR_ADDR)
-
-#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
-#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
-#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
-#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
-#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
-#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
-#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
-#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
-#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
-#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
-#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
-
-/*
- * Interrupt Status Register
- */
-#define ISR_ADDR 0xfffff30c
-#define ISR LONG_REF(ISR_ADDR)
-
-#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
-#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
-#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
-#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
-#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
-#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
-#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
-#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
-#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
-#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
-#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define ISR_SPI ISR_SPIM
-#define ISR_TMR ISR_TMR1
-
-/*
- * Interrupt Pending Register
- */
-#define IPR_ADDR 0xfffff310
-#define IPR LONG_REF(IPR_ADDR)
-
-#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
-#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
-#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
-#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
-#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
-#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
-#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
-#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
-#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
-#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
-#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IPR_SPI IPR_SPIM
-#define IPR_TMR IPR_TMR1
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
-#define PADATA_ADDR 0xfffff401 /* Port A data register */
-#define PASEL_ADDR 0xfffff403 /* Port A Select register */
-
-#define PADIR BYTE_REF(PADIR_ADDR)
-#define PADATA BYTE_REF(PADATA_ADDR)
-#define PASEL BYTE_REF(PASEL_ADDR)
-
-#define PA(x) (1 << (x))
-#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */
-
-#define PA_A16 PA(0) /* Use A16 as PA(0) */
-#define PA_A17 PA(1) /* Use A17 as PA(1) */
-#define PA_A18 PA(2) /* Use A18 as PA(2) */
-#define PA_A19 PA(3) /* Use A19 as PA(3) */
-#define PA_A20 PA(4) /* Use A20 as PA(4) */
-#define PA_A21 PA(5) /* Use A21 as PA(5) */
-#define PA_A22 PA(6) /* Use A22 as PA(6) */
-#define PA_A23 PA(7) /* Use A23 as PA(7) */
-
-/*
- * Port B
- */
-#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
-#define PBDATA_ADDR 0xfffff409 /* Port B data register */
-#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
-
-#define PBDIR BYTE_REF(PBDIR_ADDR)
-#define PBDATA BYTE_REF(PBDATA_ADDR)
-#define PBSEL BYTE_REF(PBSEL_ADDR)
-
-#define PB(x) (1 << (x))
-#define PB_D(x) PB(x) /* This is specific to port B only */
-
-#define PB_D0 PB(0) /* Use D0 as PB(0) */
-#define PB_D1 PB(1) /* Use D1 as PB(1) */
-#define PB_D2 PB(2) /* Use D2 as PB(2) */
-#define PB_D3 PB(3) /* Use D3 as PB(3) */
-#define PB_D4 PB(4) /* Use D4 as PB(4) */
-#define PB_D5 PB(5) /* Use D5 as PB(5) */
-#define PB_D6 PB(6) /* Use D6 as PB(6) */
-#define PB_D7 PB(7) /* Use D7 as PB(7) */
-
-/*
- * Port C
- */
-#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
-#define PCDATA_ADDR 0xfffff411 /* Port C data register */
-#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
-
-#define PCDIR BYTE_REF(PCDIR_ADDR)
-#define PCDATA BYTE_REF(PCDATA_ADDR)
-#define PCSEL BYTE_REF(PCSEL_ADDR)
-
-#define PC(x) (1 << (x))
-
-#define PC_WE PC(6) /* Use WE as PC(6) */
-#define PC_DTACK PC(5) /* Use DTACK as PC(5) */
-#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */
-#define PC_LDS PC(2) /* Use LDS as PC(2) */
-#define PC_UDS PC(1) /* Use UDS as PC(1) */
-#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */
-
-/*
- * Port D
- */
-#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
-#define PDDATA_ADDR 0xfffff419 /* Port D data register */
-#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
-#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
-#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
-#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
-
-#define PDDIR BYTE_REF(PDDIR_ADDR)
-#define PDDATA BYTE_REF(PDDATA_ADDR)
-#define PDPUEN BYTE_REF(PDPUEN_ADDR)
-#define PDPOL BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
-#define PDIQEG BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x) (1 << (x))
-#define PD_KB(x) PD(x) /* This is specific for Port D only */
-
-#define PD_KB0 PD(0) /* Use KB0 as PD(0) */
-#define PD_KB1 PD(1) /* Use KB1 as PD(1) */
-#define PD_KB2 PD(2) /* Use KB2 as PD(2) */
-#define PD_KB3 PD(3) /* Use KB3 as PD(3) */
-#define PD_KB4 PD(4) /* Use KB4 as PD(4) */
-#define PD_KB5 PD(5) /* Use KB5 as PD(5) */
-#define PD_KB6 PD(6) /* Use KB6 as PD(6) */
-#define PD_KB7 PD(7) /* Use KB7 as PD(7) */
-
-/*
- * Port E
- */
-#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
-#define PEDATA_ADDR 0xfffff421 /* Port E data register */
-#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
-#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
-
-#define PEDIR BYTE_REF(PEDIR_ADDR)
-#define PEDATA BYTE_REF(PEDATA_ADDR)
-#define PEPUEN BYTE_REF(PEPUEN_ADDR)
-#define PESEL BYTE_REF(PESEL_ADDR)
-
-#define PE(x) (1 << (x))
-
-#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */
-#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */
-#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */
-#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */
-#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */
-#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */
-#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */
-
-/*
- * Port F
- */
-#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
-#define PFDATA_ADDR 0xfffff429 /* Port F data register */
-#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
-#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
-
-#define PFDIR BYTE_REF(PFDIR_ADDR)
-#define PFDATA BYTE_REF(PFDATA_ADDR)
-#define PFPUEN BYTE_REF(PFPUEN_ADDR)
-#define PFSEL BYTE_REF(PFSEL_ADDR)
-
-#define PF(x) (1 << (x))
-#define PF_A(x) PF((x) - 24) /* This is Port F specific only */
-
-#define PF_A24 PF(0) /* Use A24 as PF(0) */
-#define PF_A25 PF(1) /* Use A25 as PF(1) */
-#define PF_A26 PF(2) /* Use A26 as PF(2) */
-#define PF_A27 PF(3) /* Use A27 as PF(3) */
-#define PF_A28 PF(4) /* Use A28 as PF(4) */
-#define PF_A29 PF(5) /* Use A29 as PF(5) */
-#define PF_A30 PF(6) /* Use A30 as PF(6) */
-#define PF_A31 PF(7) /* Use A31 as PF(7) */
-
-/*
- * Port G
- */
-#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
-#define PGDATA_ADDR 0xfffff431 /* Port G data register */
-#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
-#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
-
-#define PGDIR BYTE_REF(PGDIR_ADDR)
-#define PGDATA BYTE_REF(PGDATA_ADDR)
-#define PGPUEN BYTE_REF(PGPUEN_ADDR)
-#define PGSEL BYTE_REF(PGSEL_ADDR)
-
-#define PG(x) (1 << (x))
-
-#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */
-#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */
-#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */
-#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */
-#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */
-#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */
-#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */
-#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */
-
-/*
- * Port J
- */
-#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
-#define PJDATA_ADDR 0xfffff439 /* Port J data register */
-#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */
-
-#define PJDIR BYTE_REF(PJDIR_ADDR)
-#define PJDATA BYTE_REF(PJDATA_ADDR)
-#define PJSEL BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x) (1 << (x))
-
-#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */
-
-/*
- * Port K
- */
-#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
-#define PKDATA_ADDR 0xfffff441 /* Port K data register */
-#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */
-#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
-
-#define PKDIR BYTE_REF(PKDIR_ADDR)
-#define PKDATA BYTE_REF(PKDATA_ADDR)
-#define PKPUEN BYTE_REF(PKPUEN_ADDR)
-#define PKSEL BYTE_REF(PKSEL_ADDR)
-
-#define PK(x) (1 << (x))
-
-/*
- * Port M
- */
-#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */
-#define PMDATA_ADDR 0xfffff439 /* Port M data register */
-#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */
-#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */
-
-#define PMDIR BYTE_REF(PMDIR_ADDR)
-#define PMDATA BYTE_REF(PMDATA_ADDR)
-#define PMPUEN BYTE_REF(PMPUEN_ADDR)
-#define PMSEL BYTE_REF(PMSEL_ADDR)
-
-#define PM(x) (1 << (x))
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR 0xfffff500
-#define PWMC WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */
-#define PWMC_CLKSEL_SHIFT 0
-#define PWMC_PWMEN 0x0010 /* Enable PWM */
-#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */
-#define PWMC_PIN 0x0080 /* Current PWM output pin status */
-#define PWMC_LOAD 0x0100 /* Force a new period */
-#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */
-#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
-
-/* 'EZ328-compatible definitions */
-#define PWMC_EN PWMC_PWMEN
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR 0xfffff502
-#define PWMP WORD_REF(PWMP_ADDR)
-
-/*
- * PWM Width Register
- */
-#define PWMW_ADDR 0xfffff504
-#define PWMW WORD_REF(PWMW_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR 0xfffff506
-#define PWMCNT WORD_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timers
- *
- **********/
-
-/*
- * Timer Unit 1 and 2 Control Registers
- */
-#define TCTL1_ADDR 0xfffff600
-#define TCTL1 WORD_REF(TCTL1_ADDR)
-#define TCTL2_ADDR 0xfffff60c
-#define TCTL2 WORD_REF(TCTL2_ADDR)
-
-#define TCTL_TEN 0x0001 /* Timer Enable */
-#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
-#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
-#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
-#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
-#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
-#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
-#define TCTL_IRQEN 0x0010 /* IRQ Enable */
-#define TCTL_OM 0x0020 /* Output Mode */
-#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
-#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
-#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
-#define TCTL_FRR 0x0010 /* Free-Run Mode */
-
-/* 'EZ328-compatible definitions */
-#define TCTL_ADDR TCTL1_ADDR
-#define TCTL TCTL1
-
-/*
- * Timer Unit 1 and 2 Prescaler Registers
- */
-#define TPRER1_ADDR 0xfffff602
-#define TPRER1 WORD_REF(TPRER1_ADDR)
-#define TPRER2_ADDR 0xfffff60e
-#define TPRER2 WORD_REF(TPRER2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TPRER_ADDR TPRER1_ADDR
-#define TPRER TPRER1
-
-/*
- * Timer Unit 1 and 2 Compare Registers
- */
-#define TCMP1_ADDR 0xfffff604
-#define TCMP1 WORD_REF(TCMP1_ADDR)
-#define TCMP2_ADDR 0xfffff610
-#define TCMP2 WORD_REF(TCMP2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCMP_ADDR TCMP1_ADDR
-#define TCMP TCMP1
-
-/*
- * Timer Unit 1 and 2 Capture Registers
- */
-#define TCR1_ADDR 0xfffff606
-#define TCR1 WORD_REF(TCR1_ADDR)
-#define TCR2_ADDR 0xfffff612
-#define TCR2 WORD_REF(TCR2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCR_ADDR TCR1_ADDR
-#define TCR TCR1
-
-/*
- * Timer Unit 1 and 2 Counter Registers
- */
-#define TCN1_ADDR 0xfffff608
-#define TCN1 WORD_REF(TCN1_ADDR)
-#define TCN2_ADDR 0xfffff614
-#define TCN2 WORD_REF(TCN2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCN_ADDR TCN1_ADDR
-#define TCN TCN
-
-/*
- * Timer Unit 1 and 2 Status Registers
- */
-#define TSTAT1_ADDR 0xfffff60a
-#define TSTAT1 WORD_REF(TSTAT1_ADDR)
-#define TSTAT2_ADDR 0xfffff616
-#define TSTAT2 WORD_REF(TSTAT2_ADDR)
-
-#define TSTAT_COMP 0x0001 /* Compare Event occurred */
-#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
-
-/* 'EZ328-compatible definitions */
-#define TSTAT_ADDR TSTAT1_ADDR
-#define TSTAT TSTAT1
-
-/*
- * Watchdog Compare Register
- */
-#define WRR_ADDR 0xfffff61a
-#define WRR WORD_REF(WRR_ADDR)
-
-/*
- * Watchdog Counter Register
- */
-#define WCN_ADDR 0xfffff61c
-#define WCN WORD_REF(WCN_ADDR)
-
-/*
- * Watchdog Control and Status Register
- */
-#define WCSR_ADDR 0xfffff618
-#define WCSR WORD_REF(WCSR_ADDR)
-
-#define WCSR_WDEN 0x0001 /* Watchdog Enable */
-#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/
-#define WCSR_WRST 0x0004 /* Watchdog Reset */
-
-/**********
- *
- * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
- *
- **********/
-
-/*
- * SPI Slave Register
- */
-#define SPISR_ADDR 0xfffff700
-#define SPISR WORD_REF(SPISR_ADDR)
-
-#define SPISR_DATA_ADDR 0xfffff701
-#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR)
-
-#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */
-#define SPISR_DATA_SHIFT 0
-#define SPISR_SPISEN 0x0100 /* SPIS module enable */
-#define SPISR_POL 0x0200 /* SPSCLK polarity control */
-#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */
-#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */
-#define SPISR_DATARDY 0x1000 /* Data ready */
-#define SPISR_ENPOL 0x2000 /* Enable Polarity */
-#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */
-#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR 0xfffff800
-#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR 0xfffff802
-#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
-#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
-#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */
-#define SPIMCONT_XCH 0x0100 /* Exchange */
-#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* 'EZ328-compatible definitions */
-#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ
-#define SPIMCONT_ENABLE SPIMCONT_SPIMEN
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR 0xfffff900
-#define USTCNT WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */
-#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */
-#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */
-#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */
-#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */
-#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */
-#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */
-#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
-#define USTCNT_STOP 0x0200 /* Stop bit transmission */
-#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */
-#define USTCNT_PARITYEN 0x0800 /* Parity Enable */
-#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */
-#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
-#define USTCNT_RXEN 0x4000 /* Receiver Enable */
-#define USTCNT_UARTEN 0x8000 /* UART Enable */
-
-/* 'EZ328-compatible definitions */
-#define USTCNT_TXAE USTCNT_TXAVAILEN
-#define USTCNT_TXHE USTCNT_TXHALFEN
-#define USTCNT_TXEE USTCNT_TXEMPTYEN
-#define USTCNT_RXRE USTCNT_RXREADYEN
-#define USTCNT_RXHE USTCNT_RXHALFEN
-#define USTCNT_RXFE USTCNT_RXFULLEN
-#define USTCNT_CTSD USTCNT_CTSDELTAEN
-#define USTCNT_ODD USTCNT_ODD_EVEN
-#define USTCNT_PEN USTCNT_PARITYEN
-#define USTCNT_CLKM USTCNT_CLKMODE
-#define USTCNT_UEN USTCNT_UARTEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR 0xfffff902
-#define UBAUD WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT 0
-#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT 8
-#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
-#define UBAUD_GPIOSRC 0x1000 /* GPIO source */
-#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */
-#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */
-#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */
-
-/*
- * UART Receiver Register
- */
-#define URX_ADDR 0xfffff904
-#define URX WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR 0xfffff905
-#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK 0x00ff /* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100 /* Parity Error */
-#define URX_BREAK 0x0200 /* Break Detected */
-#define URX_FRAME_ERROR 0x0400 /* Framing Error */
-#define URX_OVRUN 0x0800 /* Serial Overrun */
-#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
-
-/*
- * UART Transmitter Register
- */
-#define UTX_ADDR 0xfffff906
-#define UTX WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR 0xfffff907
-#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA 0x0100 /* CTS changed */
-#define UTX_CTS_STATUS 0x0200 /* CTS State */
-#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */
-#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
-#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
-
-/* 'EZ328-compatible definitions */
-#define UTX_CTS_STAT UTX_CTS_STATUS
-#define UTX_NOCTS UTX_IGNORE_CTS
-
-/*
- * UART Miscellaneous Register
- */
-#define UMISC_ADDR 0xfffff908
-#define UMISC WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
-#define UMISC_RX_POL 0x0008 /* Receive Polarity */
-#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
-#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
-#define UMISC_RTS 0x0040 /* Set RTS status */
-#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
-#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
-#define UMISC_CLKSRC 0x4000 /* Clock Source */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
- } b;
- } urx;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
- } b;
- } utx;
- volatile unsigned short int umisc;
- volatile unsigned short int pad1;
- volatile unsigned short int pad2;
- volatile unsigned short int pad3;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register
- */
-#define LSSA_ADDR 0xfffffa00
-#define LSSA LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */
-
-/*
- * LCD Virtual Page Width Register
- */
-#define LVPW_ADDR 0xfffffa05
-#define LVPW BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with 'EZ328 !!!)
- */
-#define LXMAX_ADDR 0xfffffa08
-#define LXMAX WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR 0xfffffa0a
-#define LYMAX WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR 0xfffffa18
-#define LCXP WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK 0xc000 /* Cursor Control */
-#define LCXP_CC_TRAMSPARENT 0x0000
-#define LCXP_CC_BLACK 0x4000
-#define LCXP_CC_REVERSED 0x8000
-#define LCXP_CC_WHITE 0xc000
-#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR 0xfffffa1a
-#define LCYP WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR 0xfffffa1c
-#define LCWCH WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK 0x001f /* Cursor Height */
-#define LCWCH_CH_SHIFT 0
-#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
-#define LCWCH_CW_SHIFT 8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR 0xfffffa1f
-#define LBLKC BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
-#define LBLKC_BD_SHIFT 0
-#define LBLKC_BKEN 0x80 /* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register
- */
-#define LPICF_ADDR 0xfffffa20
-#define LPICF BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */
-#define LPICF_GS_BW 0x00
-#define LPICF_GS_GRAY_4 0x01
-#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */
-#define LPICF_PBSIZ_1 0x00
-#define LPICF_PBSIZ_2 0x02
-#define LPICF_PBSIZ_4 0x04
-
-/*
- * LCD Polarity Configuration Register
- */
-#define LPOLCF_ADDR 0xfffffa21
-#define LPOLCF BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
-#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
-#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
-#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR 0xfffffa23
-#define LACDRC BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR 0xfffffa25
-#define LPXCD BYTE_REF(LPXCD_ADDR)
-
-#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT 0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR 0xfffffa27
-#define LCKCON BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */
-#define LCKCON_DWIDTH 0x02 /* Display Memory Width */
-#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */
-#define LCKCON_DWS_SHIFT 2
-#define LCKCON_DMA16 0x40 /* DMA burst length */
-#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
-
-/* 'EZ328-compatible definitions */
-#define LCKCON_DW_MASK LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
-
-/*
- * LCD Last Buffer Address Register
- */
-#define LLBAR_ADDR 0xfffffa29
-#define LLBAR BYTE_REF(LLBAR_ADDR)
-
-#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */
-#define LLBAR_LBAR_SHIFT 0
-
-/*
- * LCD Octet Terminal Count Register
- */
-#define LOTCR_ADDR 0xfffffa2b
-#define LOTCR BYTE_REF(LOTCR_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR 0xfffffa2d
-#define LPOSR BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */
-#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */
-#define LPOSR_POS_SHIFT 0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR 0xfffffa31
-#define LFRCM BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR 0xfffffa32
-#define LGPMR WORD_REF(LGPMR_ADDR)
-
-#define LGPMR_GLEVEL3_MASK 0x000f
-#define LGPMR_GLEVEL3_SHIFT 0
-#define LGPMR_GLEVEL2_MASK 0x00f0
-#define LGPMR_GLEVEL2_SHIFT 4
-#define LGPMR_GLEVEL0_MASK 0x0f00
-#define LGPMR_GLEVEL0_SHIFT 8
-#define LGPMR_GLEVEL1_MASK 0xf000
-#define LGPMR_GLEVEL1_SHIFT 12
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR 0xfffffb00
-#define RTCTIME LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCTIME_SECONDS_SHIFT 0
-#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCTIME_MINUTES_SHIFT 16
-#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCTIME_HOURS_SHIFT 24
-
-/*
- * RTC Alarm Register
- */
-#define RTCALRM_ADDR 0xfffffb04
-#define RTCALRM LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCALRM_SECONDS_SHIFT 0
-#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCALRM_MINUTES_SHIFT 16
-#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCALRM_HOURS_SHIFT 24
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR 0xfffffb0c
-#define RTCCTL WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_384 0x0020 /* Crystal Selection */
-#define RTCCTL_ENABLE 0x0080 /* RTC Enable */
-
-/* 'EZ328-compatible definitions */
-#define RTCCTL_XTL RTCCTL_384
-#define RTCCTL_EN RTCCTL_ENABLE
-
-/*
- * RTC Interrupt Status Register
- */
-#define RTCISR_ADDR 0xfffffb0e
-#define RTCISR WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR 0xfffffb10
-#define RTCIENR WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
-#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
-#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
-#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
-
-/*
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR 0xfffffb12
-#define STPWCH WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-#endif /* _MC68328_H_ */
+++ /dev/null
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR 0xfffa11
-#define PORTE BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR 0xfffa15
-#define DDRE BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR 0xfffa17
-#define PEPAR BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR 0xfffa19
-#define PORTF BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR 0xfffa1d
-#define DDRF BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR 0xfffa1f
-#define PFPAR BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR 0xfffc15
-#define PORTQS BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR 0xfffc17
-#define DDRQS BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR 0xfffc16
-#define PQSPAR BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC 0x0000
-#define CSOR_MODE_SYNC 0x8000
-#define CSOR_MODE_MASK 0x8000
-#define CSOR_BYTE_DISABLE 0x0000
-#define CSOR_BYTE_UPPER 0x4000
-#define CSOR_BYTE_LOWER 0x2000
-#define CSOR_BYTE_BOTH 0x6000
-#define CSOR_BYTE_MASK 0x6000
-#define CSOR_RW_RSVD 0x0000
-#define CSOR_RW_READ 0x0800
-#define CSOR_RW_WRITE 0x1000
-#define CSOR_RW_BOTH 0x1800
-#define CSOR_RW_MASK 0x1800
-#define CSOR_STROBE_DS 0x0400
-#define CSOR_STROBE_AS 0x0000
-#define CSOR_STROBE_MASK 0x0400
-#define CSOR_DSACK_WAIT(x) (wait << 6)
-#define CSOR_DSACK_FTERM (14 << 6)
-#define CSOR_DSACK_EXTERNAL (15 << 6)
-#define CSOR_DSACK_MASK 0x03c0
-#define CSOR_SPACE_CPU 0x0000
-#define CSOR_SPACE_USER 0x0010
-#define CSOR_SPACE_SU 0x0020
-#define CSOR_SPACE_BOTH 0x0030
-#define CSOR_SPACE_MASK 0x0030
-#define CSOR_IPL_ALL 0x0000
-#define CSOR_IPL_PRIORITY(x) (x << 1)
-#define CSOR_IPL_MASK 0x000e
-#define CSOR_AVEC_ON 0x0001
-#define CSOR_AVEC_OFF 0x0000
-#define CSOR_AVEC_MASK 0x0001
-
-#define CSBAR_ADDR(x) ((addr >> 11) << 3)
-#define CSBAR_ADDR_MASK 0xfff8
-#define CSBAR_BLKSIZE_2K 0x0000
-#define CSBAR_BLKSIZE_8K 0x0001
-#define CSBAR_BLKSIZE_16K 0x0002
-#define CSBAR_BLKSIZE_64K 0x0003
-#define CSBAR_BLKSIZE_128K 0x0004
-#define CSBAR_BLKSIZE_256K 0x0005
-#define CSBAR_BLKSIZE_512K 0x0006
-#define CSBAR_BLKSIZE_1M 0x0007
-#define CSBAR_BLKSIZE_MASK 0x0007
-
-#define CSPAR_DISC 0
-#define CSPAR_ALT 1
-#define CSPAR_CS8 2
-#define CSPAR_CS16 3
-#define CSPAR_MASK 3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x) (x << 2)
-#define CSPAR0_CS1(x) (x << 4)
-#define CSPAR0_CS2(x) (x << 6)
-#define CSPAR0_CS3(x) (x << 8)
-#define CSPAR0_CS4(x) (x << 10)
-#define CSPAR0_CS5(x) (x << 12)
-
-#define CSPAR1_CS6(x) (x << 0)
-#define CSPAR1_CS7(x) (x << 2)
-#define CSPAR1_CS8(x) (x << 4)
-#define CSPAR1_CS9(x) (x << 6)
-#define CSPAR1_CS10(x) (x << 8)
-
-#endif
+++ /dev/null
-
-/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
- *
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * The Silver Hammer Group, Ltd.
- *
- */
-
-#ifndef _MC68EZ328_H_
-#define _MC68EZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/**********
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
-
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR 0xfffff000
-#define SCR BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
-#define SCR_DMAP 0x04 /* Double Map */
-#define SCR_SO 0x08 /* Supervisor Only */
-#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
-#define SCR_PRV 0x20 /* Privilege Violation */
-#define SCR_WPV 0x40 /* Write Protect Violation */
-#define SCR_BETO 0x80 /* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR LONG_REF(MRR_ADDR)
-
-/**********
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/*
- * Chip Select Group Base Registers
- */
-#define CSGBA_ADDR 0xfffff100
-#define CSGBB_ADDR 0xfffff102
-
-#define CSGBC_ADDR 0xfffff104
-#define CSGBD_ADDR 0xfffff106
-
-#define CSGBA WORD_REF(CSGBA_ADDR)
-#define CSGBB WORD_REF(CSGBB_ADDR)
-#define CSGBC WORD_REF(CSGBC_ADDR)
-#define CSGBD WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers
- */
-#define CSA_ADDR 0xfffff110
-#define CSB_ADDR 0xfffff112
-#define CSC_ADDR 0xfffff114
-#define CSD_ADDR 0xfffff116
-
-#define CSA WORD_REF(CSA_ADDR)
-#define CSB WORD_REF(CSB_ADDR)
-#define CSC WORD_REF(CSC_ADDR)
-#define CSD WORD_REF(CSD_ADDR)
-
-#define CSA_EN 0x0001 /* Chip-Select Enable */
-#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSA_SIZ_SHIFT 1
-#define CSA_WS_MASK 0x0070 /* Wait State */
-#define CSA_WS_SHIFT 4
-#define CSA_BSW 0x0080 /* Data Bus Width */
-#define CSA_FLASH 0x0100 /* FLASH Memory Support */
-#define CSA_RO 0x8000 /* Read-Only */
-
-#define CSB_EN 0x0001 /* Chip-Select Enable */
-#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSB_SIZ_SHIFT 1
-#define CSB_WS_MASK 0x0070 /* Wait State */
-#define CSB_WS_SHIFT 4
-#define CSB_BSW 0x0080 /* Data Bus Width */
-#define CSB_FLASH 0x0100 /* FLASH Memory Support */
-#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP 0x2000 /* Readonly if protected */
-#define CSB_SOP 0x4000 /* Supervisor only if protected */
-#define CSB_RO 0x8000 /* Read-Only */
-
-#define CSC_EN 0x0001 /* Chip-Select Enable */
-#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSC_SIZ_SHIFT 1
-#define CSC_WS_MASK 0x0070 /* Wait State */
-#define CSC_WS_SHIFT 4
-#define CSC_BSW 0x0080 /* Data Bus Width */
-#define CSC_FLASH 0x0100 /* FLASH Memory Support */
-#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP 0x2000 /* Readonly if protected */
-#define CSC_SOP 0x4000 /* Supervisor only if protected */
-#define CSC_RO 0x8000 /* Read-Only */
-
-#define CSD_EN 0x0001 /* Chip-Select Enable */
-#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSD_SIZ_SHIFT 1
-#define CSD_WS_MASK 0x0070 /* Wait State */
-#define CSD_WS_SHIFT 4
-#define CSD_BSW 0x0080 /* Data Bus Width */
-#define CSD_FLASH 0x0100 /* FLASH Memory Support */
-#define CSD_DRAM 0x0200 /* Dram Selection */
-#define CSD_COMB 0x0400 /* Combining */
-#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP 0x2000 /* Readonly if protected */
-#define CSD_SOP 0x4000 /* Supervisor only if protected */
-#define CSD_RO 0x8000 /* Read-Only */
-
-/*
- * Emulation Chip-Select Register
- */
-#define EMUCS_ADDR 0xfffff118
-#define EMUCS WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK 0x0070
-#define EMUCS_WS_SHIFT 4
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register
- */
-#define PLLCR_ADDR 0xfffff200
-#define PLLCR WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL 0x0008 /* Disable PLL */
-#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
-#define PLLCR_PRESC 0x0020 /* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR 0xfffff202
-#define PLLFSR WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK 0x00ff /* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT 0x4000 /* Protect P & Q */
-#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR 0xfffff207
-#define PCTRL BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT 0
-#define PCTRL_PCEN 0x80 /* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/*
- * Interrupt Vector Register
- */
-#define IVR_ADDR 0xfffff300
-#define IVR BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR 0xfffff302
-#define ICR WORD_REF(ICR_ADDR)
-
-#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
-#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
-#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
-#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
-#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
-#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
-#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
-#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
-#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR 0xfffff304
-#define IMR LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPI_IRQ_NUM 0 /* SPI interrupt */
-#define TMR_IRQ_NUM 1 /* Timer interrupt */
-#define UART_IRQ_NUM 2 /* UART interrupt */
-#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM 4 /* RTC interrupt */
-#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
-#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
-#define INT0_IRQ_NUM 8 /* External INT0 */
-#define INT1_IRQ_NUM 9 /* External INT1 */
-#define INT2_IRQ_NUM 10 /* External INT2 */
-#define INT3_IRQ_NUM 11 /* External INT3 */
-#define IRQ1_IRQ_NUM 16 /* IRQ1 */
-#define IRQ2_IRQ_NUM 17 /* IRQ2 */
-#define IRQ3_IRQ_NUM 18 /* IRQ3 */
-#define IRQ6_IRQ_NUM 19 /* IRQ6 */
-#define IRQ5_IRQ_NUM 20 /* IRQ5 */
-#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM SPI_IRQ_NUM
-#define TMR1_IRQ_NUM TMR_IRQ_NUM
-
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
-#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
-#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
-#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
-#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
-#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
-#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
-#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
-#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
-#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
-#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
-#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
-#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
-#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
-#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
-#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
-#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM IMR_MSPI
-#define IMR_MTMR1 IMR_MTMR
-
-/*
- * Interrupt Status Register
- */
-#define ISR_ADDR 0xfffff30c
-#define ISR LONG_REF(ISR_ADDR)
-
-#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM ISR_SPI
-#define ISR_TMR1 ISR_TMR
-
-/*
- * Interrupt Pending Register
- */
-#define IPR_ADDR 0xfffff30c
-#define IPR LONG_REF(IPR_ADDR)
-
-#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM IPR_SPI
-#define IPR_TMR1 IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
-#define PADATA_ADDR 0xfffff401 /* Port A data register */
-#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
-
-#define PADIR BYTE_REF(PADIR_ADDR)
-#define PADATA BYTE_REF(PADATA_ADDR)
-#define PAPUEN BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x) (1 << (x))
-
-/*
- * Port B
- */
-#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
-#define PBDATA_ADDR 0xfffff409 /* Port B data register */
-#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
-#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
-
-#define PBDIR BYTE_REF(PBDIR_ADDR)
-#define PBDATA BYTE_REF(PBDATA_ADDR)
-#define PBPUEN BYTE_REF(PBPUEN_ADDR)
-#define PBSEL BYTE_REF(PBSEL_ADDR)
-
-#define PB(x) (1 << (x))
-
-#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
-#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
-#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
-#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
-#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
-#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
-#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
-
-/*
- * Port C
- */
-#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
-#define PCDATA_ADDR 0xfffff411 /* Port C data register */
-#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
-
-#define PCDIR BYTE_REF(PCDIR_ADDR)
-#define PCDATA BYTE_REF(PCDATA_ADDR)
-#define PCPDEN BYTE_REF(PCPDEN_ADDR)
-#define PCSEL BYTE_REF(PCSEL_ADDR)
-
-#define PC(x) (1 << (x))
-
-#define PC_LD0 0x01 /* Use LD0 as PC[0] */
-#define PC_LD1 0x02 /* Use LD1 as PC[1] */
-#define PC_LD2 0x04 /* Use LD2 as PC[2] */
-#define PC_LD3 0x08 /* Use LD3 as PC[3] */
-#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
-#define PC_LLP 0x20 /* Use LLP as PC[5] */
-#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
-#define PC_LACD 0x80 /* Use LACD as PC[7] */
-
-/*
- * Port D
- */
-#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
-#define PDDATA_ADDR 0xfffff419 /* Port D data register */
-#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
-#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
-#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
-#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
-#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
-#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
-
-#define PDDIR BYTE_REF(PDDIR_ADDR)
-#define PDDATA BYTE_REF(PDDATA_ADDR)
-#define PDPUEN BYTE_REF(PDPUEN_ADDR)
-#define PDSEL BYTE_REF(PDSEL_ADDR)
-#define PDPOL BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x) (1 << (x))
-
-#define PD_INT0 0x01 /* Use INT0 as PD[0] */
-#define PD_INT1 0x02 /* Use INT1 as PD[1] */
-#define PD_INT2 0x04 /* Use INT2 as PD[2] */
-#define PD_INT3 0x08 /* Use INT3 as PD[3] */
-#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
-#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
-#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
-#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
-
-/*
- * Port E
- */
-#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
-#define PEDATA_ADDR 0xfffff421 /* Port E data register */
-#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
-#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
-
-#define PEDIR BYTE_REF(PEDIR_ADDR)
-#define PEDATA BYTE_REF(PEDATA_ADDR)
-#define PEPUEN BYTE_REF(PEPUEN_ADDR)
-#define PESEL BYTE_REF(PESEL_ADDR)
-
-#define PE(x) (1 << (x))
-
-#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
-#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
-#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
-#define PE_DWE 0x08 /* Use DWE as PE[3] */
-#define PE_RXD 0x10 /* Use RXD as PE[4] */
-#define PE_TXD 0x20 /* Use TXD as PE[5] */
-#define PE_RTS 0x40 /* Use RTS as PE[6] */
-#define PE_CTS 0x80 /* Use CTS as PE[7] */
-
-/*
- * Port F
- */
-#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
-#define PFDATA_ADDR 0xfffff429 /* Port F data register */
-#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
-#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
-
-#define PFDIR BYTE_REF(PFDIR_ADDR)
-#define PFDATA BYTE_REF(PFDATA_ADDR)
-#define PFPUEN BYTE_REF(PFPUEN_ADDR)
-#define PFSEL BYTE_REF(PFSEL_ADDR)
-
-#define PF(x) (1 << (x))
-
-#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
-#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
-#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
-#define PF_A20 0x08 /* Use A20 as PF[3] */
-#define PF_A21 0x10 /* Use A21 as PF[4] */
-#define PF_A22 0x20 /* Use A22 as PF[5] */
-#define PF_A23 0x40 /* Use A23 as PF[6] */
-#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
-
-/*
- * Port G
- */
-#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
-#define PGDATA_ADDR 0xfffff431 /* Port G data register */
-#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
-#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
-
-#define PGDIR BYTE_REF(PGDIR_ADDR)
-#define PGDATA BYTE_REF(PGDATA_ADDR)
-#define PGPUEN BYTE_REF(PGPUEN_ADDR)
-#define PGSEL BYTE_REF(PGSEL_ADDR)
-
-#define PG(x) (1 << (x))
-
-#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
-#define PG_A0 0x02 /* Use A0 as PG[1] */
-#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
-#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
-#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
-#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR 0xfffff500
-#define PWMC WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
-#define PWMC_CLKSEL_SHIFT 0
-#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
-#define PWMC_REPEAT_SHIFT 2
-#define PWMC_EN 0x0010 /* Enable PWM */
-#define PMNC_FIFOAV 0x0020 /* FIFO Available */
-#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
-#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT 8
-#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN PWMC_EN
-
-/*
- * PWM Sample Register
- */
-#define PWMS_ADDR 0xfffff502
-#define PWMS WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR 0xfffff504
-#define PWMP BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR 0xfffff505
-#define PWMCNT BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/*
- * Timer Control register
- */
-#define TCTL_ADDR 0xfffff600
-#define TCTL WORD_REF(TCTL_ADDR)
-
-#define TCTL_TEN 0x0001 /* Timer Enable */
-#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
-#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
-#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
-#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
-#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
-#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
-#define TCTL_IRQEN 0x0010 /* IRQ Enable */
-#define TCTL_OM 0x0020 /* Output Mode */
-#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
-#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
-#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
-#define TCTL_FRR 0x0010 /* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR TCTL_ADDR
-#define TCTL1 TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR 0xfffff602
-#define TPRER WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR TPRER_ADDR
-#define TPRER1 TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR 0xfffff604
-#define TCMP WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR TCMP_ADDR
-#define TCMP1 TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR 0xfffff606
-#define TCR WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR TCR_ADDR
-#define TCR1 TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR 0xfffff608
-#define TCN WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR TCN_ADDR
-#define TCN1 TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR 0xfffff60a
-#define TSTAT WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP 0x0001 /* Compare Event occurred */
-#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR TSTAT_ADDR
-#define TSTAT1 TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR 0xfffff800
-#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR 0xfffff802
-#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
-#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
-#define SPIMCONT_XCH 0x0100 /* Exchange */
-#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR 0xfffff900
-#define USTCNT WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
-#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
-#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
-#define USTCNT_STOP 0x0200 /* Stop bit transmission */
-#define USTCNT_ODD 0x0400 /* Odd Parity */
-#define USTCNT_PEN 0x0800 /* Parity Enable */
-#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
-#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
-#define USTCNT_RXEN 0x4000 /* Receiver Enable */
-#define USTCNT_UEN 0x8000 /* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN USTCNT_TXAE
-#define USTCNT_TXHALFEN USTCNT_TXHE
-#define USTCNT_TXEMPTYEN USTCNT_TXEE
-#define USTCNT_RXREADYEN USTCNT_RXRE
-#define USTCNT_RXHALFEN USTCNT_RXHE
-#define USTCNT_RXFULLEN USTCNT_RXFE
-#define USTCNT_CTSDELTAEN USTCNT_CTSD
-#define USTCNT_ODD_EVEN USTCNT_ODD
-#define USTCNT_PARITYEN USTCNT_PEN
-#define USTCNT_CLKMODE USTCNT_CLKM
-#define USTCNT_UARTEN USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR 0xfffff902
-#define UBAUD WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT 0
-#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT 8
-#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
-#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
-
-/*
- * UART Receiver Register
- */
-#define URX_ADDR 0xfffff904
-#define URX WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR 0xfffff905
-#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK 0x00ff /* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100 /* Parity Error */
-#define URX_BREAK 0x0200 /* Break Detected */
-#define URX_FRAME_ERROR 0x0400 /* Framing Error */
-#define URX_OVRUN 0x0800 /* Serial Overrun */
-#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
-#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
-
-/*
- * UART Transmitter Register
- */
-#define UTX_ADDR 0xfffff906
-#define UTX WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR 0xfffff907
-#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA 0x0100 /* CTS changed */
-#define UTX_CTS_STAT 0x0200 /* CTS State */
-#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
-#define UTX_NOCTS 0x0800 /* Ignore CTS */
-#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
-#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS UTX_CTS_STAT
-#define UTX_IGNORE_CTS UTX_NOCTS
-
-/*
- * UART Miscellaneous Register
- */
-#define UMISC_ADDR 0xfffff908
-#define UMISC WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
-#define UMISC_RX_POL 0x0008 /* Receive Polarity */
-#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
-#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
-#define UMISC_RTS 0x0040 /* Set RTS status */
-#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
-#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
-#define UMISC_CLKSRC 0x4000 /* Clock Source */
-#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
-
-/*
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR 0xfffff90a
-#define NIPR WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT 0
-#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
-#define NIPR_SELECT_SHIFT 8
-#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
- } b;
- } urx;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
- } b;
- } utx;
- volatile unsigned short int umisc;
- volatile unsigned short int nipr;
- volatile unsigned short int pad1;
- volatile unsigned short int pad2;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register
- */
-#define LSSA_ADDR 0xfffffa00
-#define LSSA LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register
- */
-#define LVPW_ADDR 0xfffffa05
-#define LVPW BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!)
- */
-#define LXMAX_ADDR 0xfffffa08
-#define LXMAX WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR 0xfffffa0a
-#define LYMAX WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR 0xfffffa18
-#define LCXP WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK 0xc000 /* Cursor Control */
-#define LCXP_CC_TRAMSPARENT 0x0000
-#define LCXP_CC_BLACK 0x4000
-#define LCXP_CC_REVERSED 0x8000
-#define LCXP_CC_WHITE 0xc000
-#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR 0xfffffa1a
-#define LCYP WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR 0xfffffa1c
-#define LCWCH WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK 0x001f /* Cursor Height */
-#define LCWCH_CH_SHIFT 0
-#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
-#define LCWCH_CW_SHIFT 8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR 0xfffffa1f
-#define LBLKC BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
-#define LBLKC_BD_SHIFT 0
-#define LBLKC_BKEN 0x80 /* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register
- */
-#define LPICF_ADDR 0xfffffa20
-#define LPICF BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
-#define LPICF_GS_BW 0x00
-#define LPICF_GS_GRAY_4 0x01
-#define LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
-#define LPICF_PBSIZ_1 0x00
-#define LPICF_PBSIZ_2 0x04
-#define LPICF_PBSIZ_4 0x08
-
-/*
- * LCD Polarity Configuration Register
- */
-#define LPOLCF_ADDR 0xfffffa21
-#define LPOLCF BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
-#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
-#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
-#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR 0xfffffa23
-#define LACDRC BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
-#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR 0xfffffa25
-#define LPXCD BYTE_REF(LPXCD_ADDR)
-
-#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT 0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR 0xfffffa27
-#define LCKCON BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
-#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
-
-/*
- * LCD Refresh Rate Adjustment Register
- */
-#define LRRA_ADDR 0xfffffa29
-#define LRRA BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR 0xfffffa2d
-#define LPOSR BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
-#define LPOSR_POS_SHIFT 0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR 0xfffffa31
-#define LFRCM BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR 0xfffffa33
-#define LGPMR BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK 0x0f
-#define LGPMR_G1_SHIFT 0
-#define LGPMR_G2_MASK 0xf0
-#define LGPMR_G2_SHIFT 4
-
-/*
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR 0xfffffa36
-#define PWMR WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK 0x00ff /* Pulse Width */
-#define PWMR_PW_SHIFT 0
-#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
-#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
-#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
-#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
-#define PWMR_SRC_LCD 0x4000 /* LCD clock */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR 0xfffffb00
-#define RTCTIME LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCTIME_SECONDS_SHIFT 0
-#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCTIME_MINUTES_SHIFT 16
-#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCTIME_HOURS_SHIFT 24
-
-/*
- * RTC Alarm Register
- */
-#define RTCALRM_ADDR 0xfffffb04
-#define RTCALRM LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCALRM_SECONDS_SHIFT 0
-#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCALRM_MINUTES_SHIFT 16
-#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCALRM_HOURS_SHIFT 24
-
-/*
- * Watchdog Timer Register
- */
-#define WATCHDOG_ADDR 0xfffffb0a
-#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
-#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
-#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR 0xfffffb0c
-#define RTCCTL WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL 0x0020 /* Crystal Selection */
-#define RTCCTL_EN 0x0080 /* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384 RTCCTL_XTL
-#define RTCCTL_ENABLE RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register
- */
-#define RTCISR_ADDR 0xfffffb0e
-#define RTCISR WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
-#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
-#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
-#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
-#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
-#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
-#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
-#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
-#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
-#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR 0xfffffb10
-#define RTCIENR WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
-#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
-#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
-#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
-#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
-#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
-#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
-#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
-#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
-#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
-#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
-#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
-#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
-
-/*
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR 0xfffffb12
-#define STPWCH WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register
- */
-#define DAYR_ADDR 0xfffffb1a
-#define DAYR WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register
- */
-#define DAYALARM_ADDR 0xfffffb1c
-#define DAYALARM WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register
- */
-#define DRAMMC_ADDR 0xfffffc00
-#define DRAMMC WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
-#define DRAMMC_ROW12_PA10 0x0000
-#define DRAMMC_ROW12_PA21 0x4000
-#define DRAMMC_ROW12_PA23 0x8000
-#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
-#define DRAMMC_ROW0_PA11 0x0000
-#define DRAMMC_ROW0_PA22 0x1000
-#define DRAMMC_ROW0_PA23 0x2000
-#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
-#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
-#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
-#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
-#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
-#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
-#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
-#define DRAMMC_REF_SHIFT 0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR 0xfffffc02
-#define DRAMC WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
-#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
-#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
-#define DRAMC_SLW 0x0008 /* Slow RAM */
-#define DRAMC_LSP 0x0010 /* Light Sleep */
-#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
-#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
-#define DRAMC_WS_SHIFT 6
-#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT 8
-#define DRAMC_PGSZ_256K 0x0000
-#define DRAMC_PGSZ_512K 0x0100
-#define DRAMC_PGSZ_1024K 0x0200
-#define DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO 0x0400 /* EDO DRAM */
-#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT 12
-#define DRAMC_RM 0x4000 /* Refresh Mode */
-#define DRAMC_EN 0x8000 /* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR 0xfffffd00
-#define ICEMACR LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR 0xfffffd04
-#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR 0xfffffd08
-#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
-#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR 0xfffffd0a
-#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
-#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register
- */
-#define ICEMCR_ADDR 0xfffffd0c
-#define ICEMCR WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN 0x0001 /* Compare Enable */
-#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
-#define ICEMCR_SB 0x0004 /* Single Breakpoint */
-#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
-#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register
- */
-#define ICEMSR_ADDR 0xfffffd0e
-#define ICEMSR WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
-#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68EZ328_H_ */
+++ /dev/null
-
-/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
- *
- * Copyright (c) 2000-2001 Lineo Inc. <www.lineo.com>
- * Copyright (c) 2000-2001 Lineo Canada Corp. <www.lineo.ca>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Bare & Hare Software, Inc.
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * The Silver Hammer Group, Ltd.
- *
- * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
- * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
- */
-
-#ifndef _MC68VZ328_H_
-#define _MC68VZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/**********
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
-
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR 0xfffff000
-#define SCR BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
-#define SCR_DMAP 0x04 /* Double Map */
-#define SCR_SO 0x08 /* Supervisor Only */
-#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
-#define SCR_PRV 0x20 /* Privilege Violation */
-#define SCR_WPV 0x40 /* Write Protect Violation */
-#define SCR_BETO 0x80 /* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR LONG_REF(MRR_ADDR)
-
-/**********
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/*
- * Chip Select Group Base Registers
- */
-#define CSGBA_ADDR 0xfffff100
-#define CSGBB_ADDR 0xfffff102
-
-#define CSGBC_ADDR 0xfffff104
-#define CSGBD_ADDR 0xfffff106
-
-#define CSGBA WORD_REF(CSGBA_ADDR)
-#define CSGBB WORD_REF(CSGBB_ADDR)
-#define CSGBC WORD_REF(CSGBC_ADDR)
-#define CSGBD WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers
- */
-#define CSA_ADDR 0xfffff110
-#define CSB_ADDR 0xfffff112
-#define CSC_ADDR 0xfffff114
-#define CSD_ADDR 0xfffff116
-
-#define CSA WORD_REF(CSA_ADDR)
-#define CSB WORD_REF(CSB_ADDR)
-#define CSC WORD_REF(CSC_ADDR)
-#define CSD WORD_REF(CSD_ADDR)
-
-#define CSA_EN 0x0001 /* Chip-Select Enable */
-#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSA_SIZ_SHIFT 1
-#define CSA_WS_MASK 0x0070 /* Wait State */
-#define CSA_WS_SHIFT 4
-#define CSA_BSW 0x0080 /* Data Bus Width */
-#define CSA_FLASH 0x0100 /* FLASH Memory Support */
-#define CSA_RO 0x8000 /* Read-Only */
-
-#define CSB_EN 0x0001 /* Chip-Select Enable */
-#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSB_SIZ_SHIFT 1
-#define CSB_WS_MASK 0x0070 /* Wait State */
-#define CSB_WS_SHIFT 4
-#define CSB_BSW 0x0080 /* Data Bus Width */
-#define CSB_FLASH 0x0100 /* FLASH Memory Support */
-#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP 0x2000 /* Readonly if protected */
-#define CSB_SOP 0x4000 /* Supervisor only if protected */
-#define CSB_RO 0x8000 /* Read-Only */
-
-#define CSC_EN 0x0001 /* Chip-Select Enable */
-#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSC_SIZ_SHIFT 1
-#define CSC_WS_MASK 0x0070 /* Wait State */
-#define CSC_WS_SHIFT 4
-#define CSC_BSW 0x0080 /* Data Bus Width */
-#define CSC_FLASH 0x0100 /* FLASH Memory Support */
-#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP 0x2000 /* Readonly if protected */
-#define CSC_SOP 0x4000 /* Supervisor only if protected */
-#define CSC_RO 0x8000 /* Read-Only */
-
-#define CSD_EN 0x0001 /* Chip-Select Enable */
-#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSD_SIZ_SHIFT 1
-#define CSD_WS_MASK 0x0070 /* Wait State */
-#define CSD_WS_SHIFT 4
-#define CSD_BSW 0x0080 /* Data Bus Width */
-#define CSD_FLASH 0x0100 /* FLASH Memory Support */
-#define CSD_DRAM 0x0200 /* Dram Selection */
-#define CSD_COMB 0x0400 /* Combining */
-#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP 0x2000 /* Readonly if protected */
-#define CSD_SOP 0x4000 /* Supervisor only if protected */
-#define CSD_RO 0x8000 /* Read-Only */
-
-/*
- * Emulation Chip-Select Register
- */
-#define EMUCS_ADDR 0xfffff118
-#define EMUCS WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK 0x0070
-#define EMUCS_WS_SHIFT 4
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register
- */
-#define PLLCR_ADDR 0xfffff200
-#define PLLCR WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL 0x0008 /* Disable PLL */
-#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
-#define PLLCR_PRESC 0x0020 /* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR 0xfffff202
-#define PLLFSR WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK 0x00ff /* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT 0x4000 /* Protect P & Q */
-#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR 0xfffff207
-#define PCTRL BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT 0
-#define PCTRL_PCEN 0x80 /* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/*
- * Interrupt Vector Register
- */
-#define IVR_ADDR 0xfffff300
-#define IVR BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR 0xfffff302
-#define ICR WORD_REF(ICR_ADDR)
-
-#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
-#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
-#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
-#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
-#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
-#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
-#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
-#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
-#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR 0xfffff304
-#define IMR LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */
-#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */
-#define UART1_IRQ_NUM 2 /* UART 1 interrupt */
-#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM 4 /* RTC interrupt */
-#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */
-#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
-#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */
-#define INT0_IRQ_NUM 8 /* External INT0 */
-#define INT1_IRQ_NUM 9 /* External INT1 */
-#define INT2_IRQ_NUM 10 /* External INT2 */
-#define INT3_IRQ_NUM 11 /* External INT3 */
-#define UART2_IRQ_NUM 12 /* UART 2 interrupt */
-#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */
-#define IRQ1_IRQ_NUM 16 /* IRQ1 */
-#define IRQ2_IRQ_NUM 17 /* IRQ2 */
-#define IRQ3_IRQ_NUM 18 /* IRQ3 */
-#define IRQ6_IRQ_NUM 19 /* IRQ6 */
-#define IRQ5_IRQ_NUM 20 /* IRQ5 */
-#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */
-#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
-
-#define SPI_IRQ_NUM SPI2_IRQ_NUM
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM SPI_IRQ_NUM
-#define TMR1_IRQ_NUM TMR_IRQ_NUM
-#define UART_IRQ_NUM UART1_IRQ_NUM
-
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
-#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
-#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
-#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
-#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
-#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
-#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
-#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
-#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
-#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
-#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
-#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
-#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
-#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
-#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
-#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
-#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM IMR_MSPI
-#define IMR_MTMR1 IMR_MTMR
-
-/*
- * Interrupt Status Register
- */
-#define ISR_ADDR 0xfffff30c
-#define ISR LONG_REF(ISR_ADDR)
-
-#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM ISR_SPI
-#define ISR_TMR1 ISR_TMR
-
-/*
- * Interrupt Pending Register
- */
-#define IPR_ADDR 0xfffff30c
-#define IPR LONG_REF(IPR_ADDR)
-
-#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM IPR_SPI
-#define IPR_TMR1 IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
-#define PADATA_ADDR 0xfffff401 /* Port A data register */
-#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
-
-#define PADIR BYTE_REF(PADIR_ADDR)
-#define PADATA BYTE_REF(PADATA_ADDR)
-#define PAPUEN BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x) (1 << (x))
-
-/*
- * Port B
- */
-#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
-#define PBDATA_ADDR 0xfffff409 /* Port B data register */
-#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
-#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
-
-#define PBDIR BYTE_REF(PBDIR_ADDR)
-#define PBDATA BYTE_REF(PBDATA_ADDR)
-#define PBPUEN BYTE_REF(PBPUEN_ADDR)
-#define PBSEL BYTE_REF(PBSEL_ADDR)
-
-#define PB(x) (1 << (x))
-
-#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
-#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
-#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
-#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
-#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
-#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
-#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
-
-/*
- * Port C
- */
-#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
-#define PCDATA_ADDR 0xfffff411 /* Port C data register */
-#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
-
-#define PCDIR BYTE_REF(PCDIR_ADDR)
-#define PCDATA BYTE_REF(PCDATA_ADDR)
-#define PCPDEN BYTE_REF(PCPDEN_ADDR)
-#define PCSEL BYTE_REF(PCSEL_ADDR)
-
-#define PC(x) (1 << (x))
-
-#define PC_LD0 0x01 /* Use LD0 as PC[0] */
-#define PC_LD1 0x02 /* Use LD1 as PC[1] */
-#define PC_LD2 0x04 /* Use LD2 as PC[2] */
-#define PC_LD3 0x08 /* Use LD3 as PC[3] */
-#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
-#define PC_LLP 0x20 /* Use LLP as PC[5] */
-#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
-#define PC_LACD 0x80 /* Use LACD as PC[7] */
-
-/*
- * Port D
- */
-#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
-#define PDDATA_ADDR 0xfffff419 /* Port D data register */
-#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
-#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
-#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
-#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
-#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
-#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
-
-#define PDDIR BYTE_REF(PDDIR_ADDR)
-#define PDDATA BYTE_REF(PDDATA_ADDR)
-#define PDPUEN BYTE_REF(PDPUEN_ADDR)
-#define PDSEL BYTE_REF(PDSEL_ADDR)
-#define PDPOL BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x) (1 << (x))
-
-#define PD_INT0 0x01 /* Use INT0 as PD[0] */
-#define PD_INT1 0x02 /* Use INT1 as PD[1] */
-#define PD_INT2 0x04 /* Use INT2 as PD[2] */
-#define PD_INT3 0x08 /* Use INT3 as PD[3] */
-#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
-#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
-#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
-#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
-
-/*
- * Port E
- */
-#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
-#define PEDATA_ADDR 0xfffff421 /* Port E data register */
-#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
-#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
-
-#define PEDIR BYTE_REF(PEDIR_ADDR)
-#define PEDATA BYTE_REF(PEDATA_ADDR)
-#define PEPUEN BYTE_REF(PEPUEN_ADDR)
-#define PESEL BYTE_REF(PESEL_ADDR)
-
-#define PE(x) (1 << (x))
-
-#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
-#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
-#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
-#define PE_DWE 0x08 /* Use DWE as PE[3] */
-#define PE_RXD 0x10 /* Use RXD as PE[4] */
-#define PE_TXD 0x20 /* Use TXD as PE[5] */
-#define PE_RTS 0x40 /* Use RTS as PE[6] */
-#define PE_CTS 0x80 /* Use CTS as PE[7] */
-
-/*
- * Port F
- */
-#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
-#define PFDATA_ADDR 0xfffff429 /* Port F data register */
-#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
-#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
-
-#define PFDIR BYTE_REF(PFDIR_ADDR)
-#define PFDATA BYTE_REF(PFDATA_ADDR)
-#define PFPUEN BYTE_REF(PFPUEN_ADDR)
-#define PFSEL BYTE_REF(PFSEL_ADDR)
-
-#define PF(x) (1 << (x))
-
-#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
-#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
-#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
-#define PF_A20 0x08 /* Use A20 as PF[3] */
-#define PF_A21 0x10 /* Use A21 as PF[4] */
-#define PF_A22 0x20 /* Use A22 as PF[5] */
-#define PF_A23 0x40 /* Use A23 as PF[6] */
-#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
-
-/*
- * Port G
- */
-#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
-#define PGDATA_ADDR 0xfffff431 /* Port G data register */
-#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
-#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
-
-#define PGDIR BYTE_REF(PGDIR_ADDR)
-#define PGDATA BYTE_REF(PGDATA_ADDR)
-#define PGPUEN BYTE_REF(PGPUEN_ADDR)
-#define PGSEL BYTE_REF(PGSEL_ADDR)
-
-#define PG(x) (1 << (x))
-
-#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
-#define PG_A0 0x02 /* Use A0 as PG[1] */
-#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
-#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
-#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
-#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
-
-/*
- * Port J
- */
-#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
-#define PJDATA_ADDR 0xfffff439 /* Port J data register */
-#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */
-#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
-
-#define PJDIR BYTE_REF(PJDIR_ADDR)
-#define PJDATA BYTE_REF(PJDATA_ADDR)
-#define PJPUEN BYTE_REF(PJPUEN_ADDR)
-#define PJSEL BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x) (1 << (x))
-
-/*
- * Port K
- */
-#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
-#define PKDATA_ADDR 0xfffff441 /* Port K data register */
-#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */
-#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
-
-#define PKDIR BYTE_REF(PKDIR_ADDR)
-#define PKDATA BYTE_REF(PKDATA_ADDR)
-#define PKPUEN BYTE_REF(PKPUEN_ADDR)
-#define PKSEL BYTE_REF(PKSEL_ADDR)
-
-#define PK(x) (1 << (x))
-
-#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */
-#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */
-#define PK_R_W 0x02 /* Use R/W as PK[1] */
-#define PK_LDS 0x04 /* Use /LDS as PK[2] */
-#define PK_UDS 0x08 /* Use /UDS as PK[3] */
-#define PK_LD4 0x10 /* Use LD4 as PK[4] */
-#define PK_LD5 0x20 /* Use LD5 as PK[5] */
-#define PK_LD6 0x40 /* Use LD6 as PK[6] */
-#define PK_LD7 0x80 /* Use LD7 as PK[7] */
-
-#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
-#define PJDATA_ADDR 0xfffff439 /* Port J data register */
-#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */
-#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
-
-#define PJDIR BYTE_REF(PJDIR_ADDR)
-#define PJDATA BYTE_REF(PJDATA_ADDR)
-#define PJPUEN BYTE_REF(PJPUEN_ADDR)
-#define PJSEL BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x) (1 << (x))
-
-#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */
-#define PJ_MISO 0x02 /* Use MISO as PJ[1] */
-#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */
-#define PJ_SS 0x08 /* Use SS as PJ[3] */
-#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */
-#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */
-#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */
-#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */
-
-/*
- * Port M
- */
-#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */
-#define PMDATA_ADDR 0xfffff449 /* Port M data register */
-#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */
-#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */
-
-#define PMDIR BYTE_REF(PMDIR_ADDR)
-#define PMDATA BYTE_REF(PMDATA_ADDR)
-#define PMPUEN BYTE_REF(PMPUEN_ADDR)
-#define PMSEL BYTE_REF(PMSEL_ADDR)
-
-#define PM(x) (1 << (x))
-
-#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */
-#define PM_SDCE 0x02 /* Use SDCE as PM[1] */
-#define PM_DQMH 0x04 /* Use DQMH as PM[2] */
-#define PM_DQML 0x08 /* Use DQML as PM[3] */
-#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */
-#define PM_DMOE 0x20 /* Use DMOE as PM[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR 0xfffff500
-#define PWMC WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
-#define PWMC_CLKSEL_SHIFT 0
-#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
-#define PWMC_REPEAT_SHIFT 2
-#define PWMC_EN 0x0010 /* Enable PWM */
-#define PMNC_FIFOAV 0x0020 /* FIFO Available */
-#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
-#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT 8
-#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN PWMC_EN
-
-/*
- * PWM Sample Register
- */
-#define PWMS_ADDR 0xfffff502
-#define PWMS WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR 0xfffff504
-#define PWMP BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR 0xfffff505
-#define PWMCNT BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/*
- * Timer Control register
- */
-#define TCTL_ADDR 0xfffff600
-#define TCTL WORD_REF(TCTL_ADDR)
-
-#define TCTL_TEN 0x0001 /* Timer Enable */
-#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
-#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
-#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
-#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
-#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
-#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
-#define TCTL_IRQEN 0x0010 /* IRQ Enable */
-#define TCTL_OM 0x0020 /* Output Mode */
-#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
-#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
-#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
-#define TCTL_FRR 0x0010 /* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR TCTL_ADDR
-#define TCTL1 TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR 0xfffff602
-#define TPRER WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR TPRER_ADDR
-#define TPRER1 TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR 0xfffff604
-#define TCMP WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR TCMP_ADDR
-#define TCMP1 TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR 0xfffff606
-#define TCR WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR TCR_ADDR
-#define TCR1 TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR 0xfffff608
-#define TCN WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR TCN_ADDR
-#define TCN1 TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR 0xfffff60a
-#define TSTAT WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP 0x0001 /* Compare Event occurred */
-#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR TSTAT_ADDR
-#define TSTAT1 TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR 0xfffff800
-#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR 0xfffff802
-#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
-#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
-#define SPIMCONT_XCH 0x0100 /* Exchange */
-#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-
-#define USTCNT_ADDR 0xfffff900
-#define USTCNT WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
-#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
-#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
-#define USTCNT_STOP 0x0200 /* Stop bit transmission */
-#define USTCNT_ODD 0x0400 /* Odd Parity */
-#define USTCNT_PEN 0x0800 /* Parity Enable */
-#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
-#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
-#define USTCNT_RXEN 0x4000 /* Receiver Enable */
-#define USTCNT_UEN 0x8000 /* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN USTCNT_TXAE
-#define USTCNT_TXHALFEN USTCNT_TXHE
-#define USTCNT_TXEMPTYEN USTCNT_TXEE
-#define USTCNT_RXREADYEN USTCNT_RXRE
-#define USTCNT_RXHALFEN USTCNT_RXHE
-#define USTCNT_RXFULLEN USTCNT_RXFE
-#define USTCNT_CTSDELTAEN USTCNT_CTSD
-#define USTCNT_ODD_EVEN USTCNT_ODD
-#define USTCNT_PARITYEN USTCNT_PEN
-#define USTCNT_CLKMODE USTCNT_CLKM
-#define USTCNT_UARTEN USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR 0xfffff902
-#define UBAUD WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT 0
-#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT 8
-#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
-#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
-
-/*
- * UART Receiver Register
- */
-#define URX_ADDR 0xfffff904
-#define URX WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR 0xfffff905
-#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK 0x00ff /* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100 /* Parity Error */
-#define URX_BREAK 0x0200 /* Break Detected */
-#define URX_FRAME_ERROR 0x0400 /* Framing Error */
-#define URX_OVRUN 0x0800 /* Serial Overrun */
-#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
-#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
-
-/*
- * UART Transmitter Register
- */
-#define UTX_ADDR 0xfffff906
-#define UTX WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR 0xfffff907
-#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA 0x0100 /* CTS changed */
-#define UTX_CTS_STAT 0x0200 /* CTS State */
-#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
-#define UTX_NOCTS 0x0800 /* Ignore CTS */
-#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
-#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS UTX_CTS_STAT
-#define UTX_IGNORE_CTS UTX_NOCTS
-
-/*
- * UART Miscellaneous Register
- */
-#define UMISC_ADDR 0xfffff908
-#define UMISC WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
-#define UMISC_RX_POL 0x0008 /* Receive Polarity */
-#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
-#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
-#define UMISC_RTS 0x0040 /* Set RTS status */
-#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
-#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
-#define UMISC_CLKSRC 0x4000 /* Clock Source */
-#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
-
-/*
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR 0xfffff90a
-#define NIPR WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT 0
-#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
-#define NIPR_SELECT_SHIFT 8
-#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
- } b;
- } urx;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
- } b;
- } utx;
- volatile unsigned short int umisc;
- volatile unsigned short int nipr;
- volatile unsigned short int hmark;
- volatile unsigned short int unused;
-} __attribute__((packed)) m68328_uart;
-
-
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register
- */
-#define LSSA_ADDR 0xfffffa00
-#define LSSA LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register
- */
-#define LVPW_ADDR 0xfffffa05
-#define LVPW BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!)
- */
-#define LXMAX_ADDR 0xfffffa08
-#define LXMAX WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR 0xfffffa0a
-#define LYMAX WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR 0xfffffa18
-#define LCXP WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK 0xc000 /* Cursor Control */
-#define LCXP_CC_TRAMSPARENT 0x0000
-#define LCXP_CC_BLACK 0x4000
-#define LCXP_CC_REVERSED 0x8000
-#define LCXP_CC_WHITE 0xc000
-#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR 0xfffffa1a
-#define LCYP WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR 0xfffffa1c
-#define LCWCH WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK 0x001f /* Cursor Height */
-#define LCWCH_CH_SHIFT 0
-#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
-#define LCWCH_CW_SHIFT 8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR 0xfffffa1f
-#define LBLKC BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
-#define LBLKC_BD_SHIFT 0
-#define LBLKC_BKEN 0x80 /* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register
- */
-#define LPICF_ADDR 0xfffffa20
-#define LPICF BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
-#define LPICF_GS_BW 0x00
-#define LPICF_GS_GRAY_4 0x01
-#define LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
-#define LPICF_PBSIZ_1 0x00
-#define LPICF_PBSIZ_2 0x04
-#define LPICF_PBSIZ_4 0x08
-
-/*
- * LCD Polarity Configuration Register
- */
-#define LPOLCF_ADDR 0xfffffa21
-#define LPOLCF BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
-#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
-#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
-#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR 0xfffffa23
-#define LACDRC BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
-#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR 0xfffffa25
-#define LPXCD BYTE_REF(LPXCD_ADDR)
-
-#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT 0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR 0xfffffa27
-#define LCKCON BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
-#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
-
-/*
- * LCD Refresh Rate Adjustment Register
- */
-#define LRRA_ADDR 0xfffffa29
-#define LRRA BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR 0xfffffa2d
-#define LPOSR BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
-#define LPOSR_POS_SHIFT 0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR 0xfffffa31
-#define LFRCM BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR 0xfffffa33
-#define LGPMR BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK 0x0f
-#define LGPMR_G1_SHIFT 0
-#define LGPMR_G2_MASK 0xf0
-#define LGPMR_G2_SHIFT 4
-
-/*
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR 0xfffffa36
-#define PWMR WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK 0x00ff /* Pulse Width */
-#define PWMR_PW_SHIFT 0
-#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
-#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
-#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
-#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
-#define PWMR_SRC_LCD 0x4000 /* LCD clock */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR 0xfffffb00
-#define RTCTIME LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCTIME_SECONDS_SHIFT 0
-#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCTIME_MINUTES_SHIFT 16
-#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCTIME_HOURS_SHIFT 24
-
-/*
- * RTC Alarm Register
- */
-#define RTCALRM_ADDR 0xfffffb04
-#define RTCALRM LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCALRM_SECONDS_SHIFT 0
-#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCALRM_MINUTES_SHIFT 16
-#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCALRM_HOURS_SHIFT 24
-
-/*
- * Watchdog Timer Register
- */
-#define WATCHDOG_ADDR 0xfffffb0a
-#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
-#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
-#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR 0xfffffb0c
-#define RTCCTL WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL 0x0020 /* Crystal Selection */
-#define RTCCTL_EN 0x0080 /* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384 RTCCTL_XTL
-#define RTCCTL_ENABLE RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register
- */
-#define RTCISR_ADDR 0xfffffb0e
-#define RTCISR WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
-#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
-#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
-#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
-#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
-#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
-#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
-#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
-#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
-#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR 0xfffffb10
-#define RTCIENR WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
-#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
-#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
-#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
-#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
-#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
-#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
-#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
-#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
-#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
-#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
-#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
-#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
-
-/*
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR 0xfffffb12
-#define STPWCH WORD_REF(STPWCH_ADDR)
-
-#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register
- */
-#define DAYR_ADDR 0xfffffb1a
-#define DAYR WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register
- */
-#define DAYALARM_ADDR 0xfffffb1c
-#define DAYALARM WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register
- */
-#define DRAMMC_ADDR 0xfffffc00
-#define DRAMMC WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
-#define DRAMMC_ROW12_PA10 0x0000
-#define DRAMMC_ROW12_PA21 0x4000
-#define DRAMMC_ROW12_PA23 0x8000
-#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
-#define DRAMMC_ROW0_PA11 0x0000
-#define DRAMMC_ROW0_PA22 0x1000
-#define DRAMMC_ROW0_PA23 0x2000
-#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
-#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
-#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
-#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
-#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
-#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
-#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
-#define DRAMMC_REF_SHIFT 0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR 0xfffffc02
-#define DRAMC WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
-#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
-#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
-#define DRAMC_SLW 0x0008 /* Slow RAM */
-#define DRAMC_LSP 0x0010 /* Light Sleep */
-#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
-#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
-#define DRAMC_WS_SHIFT 6
-#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT 8
-#define DRAMC_PGSZ_256K 0x0000
-#define DRAMC_PGSZ_512K 0x0100
-#define DRAMC_PGSZ_1024K 0x0200
-#define DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO 0x0400 /* EDO DRAM */
-#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT 12
-#define DRAMC_RM 0x4000 /* Refresh Mode */
-#define DRAMC_EN 0x8000 /* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR 0xfffffd00
-#define ICEMACR LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR 0xfffffd04
-#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR 0xfffffd08
-#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
-#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR 0xfffffd0a
-#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
-#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register
- */
-#define ICEMCR_ADDR 0xfffffd0c
-#define ICEMCR WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN 0x0001 /* Compare Enable */
-#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
-#define ICEMCR_SB 0x0004 /* Single Breakpoint */
-#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
-#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register
- */
-#define ICEMSR_ADDR 0xfffffd0e
-#define ICEMSR WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
-#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68VZ328_H_ */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
- *
- * (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
- */
-
-/****************************************************************************/
-#ifndef anchor_h
-#define anchor_h
-/****************************************************************************/
-
-/*
- * Define basic addressing info.
- */
-#if defined(CONFIG_M5407C3)
-#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */
-#define COMEM_IRQ 25 /* IRQ of anchor part */
-#else
-#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */
-#define COMEM_IRQ 25 /* IRQ of anchor part */
-#endif
-
-/****************************************************************************/
-
-/*
- * 4-byte registers of CO-MEM, so adjust register addresses for
- * easy access. Handy macro for word access too.
- */
-#define LREG(a) ((a) >> 2)
-#define WREG(a) ((a) >> 1)
-
-
-/*
- * Define base addresses within CO-MEM Lite register address space.
- */
-#define COMEM_I2O 0x0000 /* I2O registers */
-#define COMEM_OPREGS 0x0400 /* Operation registers */
-#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */
-#define COMEM_SHMEM 0x4000 /* Shared memory region */
-
-#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */
-
-
-/*
- * Define CO-MEM Registers.
- */
-#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */
-#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */
-#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */
-#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */
-#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */
-#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */
-#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */
-#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */
-
-#define COMEM_DAHBASE 0x0460 /* Direct access base address */
-
-#define COMEM_NVCMD 0x04a0 /* I2C serial command */
-#define COMEM_NVREAD 0x04a4 /* I2C serial read */
-#define COMEM_NVSTAT 0x04a8 /* I2C status */
-
-#define COMEM_DMALBASE 0x04b0 /* DMA local base address */
-#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */
-#define COMEM_DMASIZE 0x04b8 /* DMA size */
-#define COMEM_DMACTL 0x04bc /* DMA control */
-
-#define COMEM_HCTL 0x04e0 /* Host control */
-#define COMEM_HINT 0x04e4 /* Host interrupt control/status */
-#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */
-#define COMEM_LINT 0x04f4 /* Local interrupt contole status */
-#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */
-
-#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */
-
-
-/*
- * Commands and flags for use with Direct Access Register.
- */
-#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */
-#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */
-#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */
-#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */
-#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */
-#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */
-#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */
-#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */
-
-#define COMEM_DA_ADDR(a) ((a) & 0xffffe000)
-
-#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff)
-
-
-/*
- * The PCI bus will be limited in what slots will actually be used.
- * Define valid device numbers for different boards.
- */
-#if defined(CONFIG_M5407C3)
-#define COMEM_MINDEV 14 /* Minimum valid DEVICE */
-#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */
-#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */
-#else
-#define COMEM_MINDEV 0 /* Minimum valid DEVICE */
-#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */
-#endif
-
-#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */
-
-
-/****************************************************************************/
-#endif /* anchor_h */
+++ /dev/null
-#ifndef __ARCH_M68KNOMMU_ATOMIC__
-#define __ARCH_M68KNOMMU_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/system.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-/*
- * We do not have SMP m68k systems, so we don't have to deal with that.
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = i)
-
-static __inline__ void atomic_add(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
-#else
- __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ void atomic_sub(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
-#else
- __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
-{
- char c;
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__("subl %2,%1; seq %0"
- : "=d" (c), "+m" (*v)
- : "d" (i));
-#else
- __asm__ __volatile__("subl %2,%1; seq %0"
- : "=d" (c), "+m" (*v)
- : "di" (i));
-#endif
- return c != 0;
-}
-
-static __inline__ void atomic_inc(volatile atomic_t *v)
-{
- __asm__ __volatile__("addql #1,%0" : "+m" (*v));
-}
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-
-static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
-{
- char c;
- __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
- return c != 0;
-}
-
-static __inline__ void atomic_dec(volatile atomic_t *v)
-{
- __asm__ __volatile__("subql #1,%0" : "+m" (*v));
-}
-
-static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
-{
- char c;
- __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
- return c != 0;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-static inline int atomic_add_return(int i, atomic_t * v)
-{
- unsigned long temp, flags;
-
- local_irq_save(flags);
- temp = *(long *)v;
- temp += i;
- *(long *)v = temp;
- local_irq_restore(flags);
-
- return temp;
-}
-
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-
-static inline int atomic_sub_return(int i, atomic_t * v)
-{
- unsigned long temp, flags;
-
- local_irq_save(flags);
- temp = *(long *)v;
- temp -= i;
- *(long *)v = temp;
- local_irq_restore(flags);
-
- return temp;
-}
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-
-#include <asm-generic/atomic.h>
-#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
+++ /dev/null
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_BITOPS_H
-#define _M68KNOMMU_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h> /* swab32 */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline int ffs(unsigned int val)
-{
- if (!val)
- return 0;
-
- asm volatile(
- "bitrev %0\n\t"
- "ff1 %0\n\t"
- : "=d" (val)
- : "0" (val)
- );
- val++;
- return val;
-}
-
-static inline int __ffs(unsigned int val)
-{
- asm volatile(
- "bitrev %0\n\t"
- "ff1 %0\n\t"
- : "=d" (val)
- : "0" (val)
- );
- return val;
-}
-
-#else
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
-#endif
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
-
-static __inline__ void set_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0", "cc");
-#else
- __asm__ __volatile__ ("bset %1,%0"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- : "cc");
-#endif
-}
-
-#define __set_bit(nr, addr) set_bit(nr, addr)
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0", "cc");
-#else
- __asm__ __volatile__ ("bclr %1,%0"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- : "cc");
-#endif
-}
-
-#define __clear_bit(nr, addr) clear_bit(nr, addr)
-
-static __inline__ void change_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0", "cc");
-#else
- __asm__ __volatile__ ("bchg %1,%0"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- : "cc");
-#endif
-}
-
-#define __change_bit(nr, addr) change_bit(nr, addr)
-
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bset %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
-
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bclr %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
-
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bchg %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
-
-/*
- * This routine doesn't need to be atomic.
- */
-static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
-{
- return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
-{
- int * a = (int *) addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- return ((mask & *a) != 0);
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)))
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-static __inline__ int ext2_set_bit(int nr, volatile void * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bset %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bclr %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define ext2_set_bit_atomic(lock, nr, addr) \
- ({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_set_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
- })
-
-#define ext2_clear_bit_atomic(lock, nr, addr) \
- ({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_clear_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
- })
-
-static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
- : "=d" (retval)
- : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("btst %2,%1; sne %0"
- : "=d" (retval)
- : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define ext2_find_first_zero_bit(addr, size) \
- ext2_find_next_zero_bit((addr), (size), 0)
-
-static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
-{
- unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
- unsigned long result = offset & ~31UL;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if(offset) {
- /* We hold the little endian value in tmp, but then the
- * shift is illegal. So we could keep a big endian value
- * in tmp, like this:
- *
- * tmp = __swab32(*(p++));
- * tmp |= ~0UL >> (32-offset);
- *
- * but this would decrease performance, so we change the
- * shift:
- */
- tmp = *(p++);
- tmp |= __swab32(~0UL >> (32-offset));
- if(size < 32)
- goto found_first;
- if(~tmp)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while(size & ~31UL) {
- if(~(tmp = *(p++)))
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if(!size)
- return result;
- tmp = *p;
-
-found_first:
- /* tmp is little endian, so we would have to swab the shift,
- * see above. But then we have to swab tmp below for ffz, so
- * we might as well do this here.
- */
- return result + ffz(__swab32(tmp) | (~0UL << size));
-found_middle:
- return result + ffz(__swab32(tmp));
-}
-
-#define ext2_find_next_bit(addr, size, off) \
- generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _M68KNOMMU_BITOPS_H */
+++ /dev/null
-
-/* Nothing for m68knommu */
+++ /dev/null
-/* bootstd.h: Bootloader system call interface
- *
- * (c) 1999, Rt-Control, Inc.
- */
-
-#ifndef __BOOTSTD_H__
-#define __BOOTSTD_H__
-
-#define NR_BSC 21 /* last used bootloader system call */
-
-#define __BN_reset 0 /* reset and start the bootloader */
-#define __BN_test 1 /* tests the system call interface */
-#define __BN_exec 2 /* executes a bootloader image */
-#define __BN_exit 3 /* terminates a bootloader image */
-#define __BN_program 4 /* program FLASH from a chain */
-#define __BN_erase 5 /* erase sector(s) of FLASH */
-#define __BN_open 6
-#define __BN_write 7
-#define __BN_read 8
-#define __BN_close 9
-#define __BN_mmap 10 /* map a file descriptor into memory */
-#define __BN_munmap 11 /* remove a file to memory mapping */
-#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */
-#define __BN_getserialnum 13 /* get the serial number of this board */
-#define __BN_getbenv 14 /* get a bootloader envvar */
-#define __BN_setbenv 15 /* get a bootloader envvar */
-#define __BN_setpmask 16 /* set the protection mask */
-#define __BN_readenv 17 /* read environment variables */
-#define __BN_flash_chattr_range 18
-#define __BN_flash_erase_range 19
-#define __BN_flash_write_range 20
-
-/* Calling conventions compatible to (uC)linux/68k
- * We use simmilar macros to call into the bootloader as for uClinux
- */
-
-#define __bsc_return(type, res) \
-do { \
- if ((unsigned long)(res) >= (unsigned long)(-64)) { \
- /* let errno be a function, preserve res in %d0 */ \
- int __err = -(res); \
- errno = __err; \
- res = -1; \
- } \
- return (type)(res); \
-} while (0)
-
-#define _bsc0(type,name) \
-type name(void) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc1(type,name,atype,a) \
-type name(atype a) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc2(type,name,atype,a,btype,b) \
-type name(atype a, btype b) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
-type name(atype a, btype b, ctype c) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- register long __c __asm__ ("%d3") = (long)c; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b), \
- "d" (__c) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-type name(atype a, btype b, ctype c, dtype d) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- register long __c __asm__ ("%d3") = (long)c; \
- register long __d __asm__ ("%d4") = (long)d; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b), \
- "d" (__c), "d" (__d) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
-type name(atype a, btype b, ctype c, dtype d, etype e) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- register long __c __asm__ ("%d3") = (long)c; \
- register long __d __asm__ ("%d4") = (long)d; \
- register long __e __asm__ ("%d5") = (long)e; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b), \
- "d" (__c), "d" (__d), "d" (__e) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#endif /* __BOOTSTD_H__ */
+++ /dev/null
-#ifndef _M68KNOMMU_BUG_H
-#define _M68KNOMMU_BUG_H
-#include <asm-generic/bug.h>
-#endif
+++ /dev/null
-/*
- * include/asm-m68k/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
+++ /dev/null
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
+++ /dev/null
-#ifndef __ARCH_M68KNOMMU_CACHE_H
-#define __ARCH_M68KNOMMU_CACHE_H
-
-/* bytes per L1 cache line */
-#define L1_CACHE_BYTES 16 /* this need to be at least 1 */
-
-/* m68k-elf-gcc 2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
+++ /dev/null
-#include <asm-m68k/cachectl.h>
+++ /dev/null
-#ifndef _M68KNOMMU_CACHEFLUSH_H
-#define _M68KNOMMU_CACHEFLUSH_H
-
-/*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
- */
-#include <linux/mm.h>
-
-#define flush_cache_all() __flush_cache_all()
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) __flush_cache_all()
-#define flush_cache_page(vma, vmaddr) do { } while (0)
-#define flush_dcache_range(start,len) __flush_cache_all()
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start,len) __flush_cache_all()
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-static inline void __flush_cache_all(void)
-{
-#ifdef CONFIG_M5407
- /*
- * Use cpushl to push and invalidate all cache lines.
- * Gas doesn't seem to know how to generate the ColdFire
- * cpushl instruction... Oh well, bit stuff it for now.
- */
- __asm__ __volatile__ (
- "nop\n\t"
- "clrl %%d0\n\t"
- "1:\n\t"
- "movel %%d0,%%a0\n\t"
- "2:\n\t"
- ".word 0xf468\n\t"
- "addl #0x10,%%a0\n\t"
- "cmpl #0x00000800,%%a0\n\t"
- "blt 2b\n\t"
- "addql #1,%%d0\n\t"
- "cmpil #4,%%d0\n\t"
- "bne 1b\n\t"
- "movel #0xb6088500,%%d0\n\t"
- "movec %%d0,%%CACR\n\t"
- : : : "d0", "a0" );
-#endif /* CONFIG_M5407 */
-#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
- __asm__ __volatile__ (
- "movel #0x81000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M527x || CONFIG_M528x */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
- __asm__ __volatile__ (
- "movel #0x81000100, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-#ifdef CONFIG_M5249
- __asm__ __volatile__ (
- "movel #0xa1000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M5249 */
-#ifdef CONFIG_M532x
- __asm__ __volatile__ (
- "movel #0x81000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M532x */
-}
-
-#endif /* _M68KNOMMU_CACHEFLUSH_H */
+++ /dev/null
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
- void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
- tmp = (tmp & 0xffff) + (tmp >> 16);
- tmp = (tmp & 0xffff) + (tmp >> 16);
- return (__force __sum16)~tmp;
-#else
- __asm__("swap %1\n\t"
- "addw %1, %0\n\t"
- "clrw %1\n\t"
- "addxw %1, %0"
- : "=&d" (sum), "=&d" (tmp)
- : "0" (sum), "1" (sum));
- return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("addl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "addxl %5,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (saddr)
- : "0" (daddr), "1" (saddr), "d" (len + proto),
- "d"(sum));
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- register unsigned long tmp;
- __asm__("addl %2@,%0\n\t"
- "movel %2@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@,%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (tmp)
- : "a" (saddr), "a" (daddr), "d" (len + proto),
- "0" (sum));
-
- return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * coldfire.h -- Motorola ColdFire CPU sepecific defines
- *
- * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef coldfire_h
-#define coldfire_h
-/****************************************************************************/
-
-
-/*
- * Define master clock frequency. This is essentially done at config
- * time now. No point enumerating dozens of possible clock options
- * here. Also the peripheral clock (bus clock) divide ratio is set
- * at config time too.
- */
-#ifdef CONFIG_CLOCK_SET
-#define MCF_CLK CONFIG_CLOCK_FREQ
-#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
-#else
-#error "Don't know what your ColdFire CPU clock frequency is??"
-#endif
-
-/*
- * Define the processor support peripherals base address.
- * This is generally setup by the boards start up code.
- */
-#define MCF_MBAR 0x10000000
-#define MCF_MBAR2 0x80000000
-#if defined(CONFIG_M520x)
-#define MCF_IPSBAR 0xFC000000
-#else
-#define MCF_IPSBAR 0x40000000
-#endif
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
-#undef MCF_MBAR
-#define MCF_MBAR MCF_IPSBAR
-#elif defined(CONFIG_M532x)
-#undef MCF_MBAR
-#define MCF_MBAR 0x00000000
-#endif
-
-/****************************************************************************/
-#endif /* coldfire_h */
+++ /dev/null
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels. Some CPM control and status is available
- * through the 68360 internal memory map. See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space. The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST ((ushort)0x8000)
-#define CPM_CR_OPCODE ((ushort)0x0f00)
-#define CPM_CR_CHAN ((ushort)0x00f0)
-#define CPM_CR_FLG ((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009)
-#define CPM_CR_GCI_ABORT ((ushort)0x000a)
-#define CPM_CR_RESET_BCS ((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1 ((ushort)0x0000)
-#define CPM_CR_CH_SCC2 ((ushort)0x0004)
-#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */
-#define CPM_CR_CH_TMR ((ushort)0x0005)
-#define CPM_CR_CH_SCC3 ((ushort)0x0008)
-#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1 ((ushort)0x0009)
-#define CPM_CR_CH_SCC4 ((ushort)0x000c)
-#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2 ((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
- * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional. Some areas can be (and are
- * being) used for microcode. There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE ((uint)0x0000)
-#define CPM_DATAONLY_SIZE ((uint)0x0800)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */
-extern QUICC *pquicc;
-uint m360_cpm_dpalloc(uint size);
-/* void *m360_cpm_hostalloc(uint size); */
-void m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */
-
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */
-
-#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */
-#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */
-
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */
-
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_UN ((ushort)0x0002) /* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so
- * instead, we need only a parameter ram `slot' */
-
-#define PRSLOT_SCC1 0
-#define PRSLOT_SCC2 1
-#define PRSLOT_SCC3 2
-#define PRSLOT_SMC1 2
-#define PRSLOT_SCC4 3
-#define PRSLOT_SMC2 3
-
-
-/* #define PROFF_SCC1 ((uint)0x0000) */
-/* #define PROFF_SCC2 ((uint)0x0100) */
-/* #define PROFF_SCC3 ((uint)0x0200) */
-/* #define PROFF_SMC1 ((uint)0x0280) */
-/* #define PROFF_SCC4 ((uint)0x0300) */
-/* #define PROFF_SMC2 ((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer. It is half duplex, in that
- * it can only receive or transmit. The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
- ushort scent_rbase;
- ushort scent_tbase;
- u_char scent_cfcr;
- u_char scent_smask;
- ushort scent_mrblr;
- uint scent_rstate;
- uint scent_r_ptr;
- ushort scent_rbptr;
- ushort scent_r_cnt;
- uint scent_rtemp;
- uint scent_tstate;
- uint scent_t_ptr;
- ushort scent_tbptr;
- ushort scent_t_cnt;
- uint scent_ttemp;
- ushort scent_max_sl;
- ushort scent_sl_cnt;
- ushort scent_character1;
- ushort scent_character2;
- ushort scent_character3;
- ushort scent_character4;
- ushort scent_character5;
- ushort scent_character6;
- ushort scent_character7;
- ushort scent_character8;
- ushort scent_rccm;
- ushort scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F ((u_char)0x08)
-#define SMC_CENT_PE ((u_char)0x04)
-#define SMC_CENT_S ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- * 68360 - lxt905
- * PA0/RXD1 - rxd
- * PA1/TXD1 - txd
- * PA8/CLK1 - tclk
- * PA9/CLK2 - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1 - cd
- */
-#define PA_ENET_RXD PA_RXD1
-#define PA_ENET_TXD PA_TXD1
-#define PA_ENET_TCLK PA_CLK1
-#define PA_ENET_RCLK PA_CLK2
-#define PC_ENET_TENA PC_RTS1
-#define PC_ENET_CLSN PC_CTS1
-#define PC_ENET_RENA PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
- * to the MBX860 board. Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD ((ushort)0x0001)
-#define PA_ENET_TXD ((ushort)0x0002)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PC_ENET_TENA ((ushort)0x0001)
-#define PC_ENET_CLSN ((ushort)0x0010)
-#define PC_ENET_RENA ((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000003d)
-#endif
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003d00)
-#endif
-
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0100)
-#define PA_ENET_RCLK ((ushort)0x0200)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP ((uint)0x00000004)
-#define PB_BSE_FDXDIS ((uint)0x00008000)
-#define PC_BSE_LOOPBACK ((ushort)0x0800)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00002c00)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC ((ushort)0x8000)
-#define SCU_PMSR_SL ((ushort)0x4000)
-#define SCU_PMSR_CL ((ushort)0x3000)
-#define SCU_PMSR_UM ((ushort)0x0c00)
-#define SCU_PMSR_FRZ ((ushort)0x0200)
-#define SCU_PMSR_RZS ((ushort)0x0100)
-#define SCU_PMSR_SYN ((ushort)0x0080)
-#define SCU_PMSR_DRT ((ushort)0x0040)
-#define SCU_PMSR_PEN ((ushort)0x0010)
-#define SCU_PMSR_RPM ((ushort)0x000c)
-#define SCU_PMSR_REVP ((ushort)0x0008)
-#define SCU_PMSR_TPM ((ushort)0x0003)
-#define SCU_PMSR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-
-
-/* CPM interrupts. There are nearly 32 interrupts generated by CPM
- * channels or devices. All of these are presented to the PPC core
- * as a single interrupt. The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler. We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR 32 */
-/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */
-/* #define CPMVEC_SCC1 ((ushort)0x1e) */
-/* #define CPMVEC_SCC2 ((ushort)0x1d) */
-/* #define CPMVEC_SCC3 ((ushort)0x1c) */
-/* #define CPMVEC_SCC4 ((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */
-/* #define CPMVEC_TIMER1 ((ushort)0x19) */
-/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */
-/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
-/* #define CPMVEC_IDMA1 ((ushort)0x15) */
-/* #define CPMVEC_IDMA2 ((ushort)0x14) */
-/* #define CPMVEC_TIMER2 ((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
-/* #define CPMVEC_I2C ((ushort)0x10) */
-/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */
-/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */
-/* #define CPMVEC_TIMER4 ((ushort)0x07) */
-/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */
-/* #define CPMVEC_SPI ((ushort)0x05) */
-/* #define CPMVEC_SMC1 ((ushort)0x04) */
-/* #define CPMVEC_SMC2 ((ushort)0x03) */
-/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */
-/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */
-/* #define CPMVEC_ERROR ((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_IEN ((uint)0x00000080) /* Int. enable */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#endif /* __CPM_360__ */
+++ /dev/null
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
+++ /dev/null
-#ifndef _M68KNOMMU_CURRENT_H
-#define _M68KNOMMU_CURRENT_H
-/*
- * current.h
- * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * rather than dedicate a register (as the m68k source does), we
- * just keep a global, we should probably just change it all to be
- * current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
- return(current_thread_info()->task);
-}
-
-#define current get_current()
-
-#endif /* _M68KNOMMU_CURRENT_H */
+++ /dev/null
-#define DEBUG 1
-#ifdef CONFIG_COLDFIRE
-#define BREAK asm volatile ("halt")
-#else
-#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_DELAY_H
-#define _M68KNOMMU_DELAY_H
-
-/*
- * Copyright (C) 1994 Hamish Macdonald
- * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
-#if defined(CONFIG_COLDFIRE)
- /* The coldfire runs this loop at significantly different speeds
- * depending upon long word alignment or not. We'll pad it to
- * long word alignment which is the faster version.
- * The 0x4a8e is of course a 'tstl %fp' instruction. This is better
- * than using a NOP (0x4e71) instruction because it executes in one
- * cycle not three and doesn't allow for an arbitary delay waiting
- * for bus cycles to finish. Also fp/a6 isn't likely to cause a
- * stall waiting for the register to become valid if such is added
- * to the coldfire at some stage.
- */
- __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t"
- "1: subql #1, %0\n\t"
- "jcc 1b"
- : "=d" (loops) : "0" (loops));
-#else
- __asm__ __volatile__ ( "1: subql #1, %0\n\t"
- "jcc 1b"
- : "=d" (loops) : "0" (loops));
-#endif
-}
-
-/*
- * Ideally we use a 32*32->64 multiply to calculate the number of
- * loop iterations, but the older standard 68k and ColdFire do not
- * have this instruction. So for them we have a clsoe approximation
- * loop using 32*32->32 multiplies only. This calculation based on
- * the ARM version of delay.
- *
- * We want to implement:
- *
- * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
- */
-
-#define HZSCALE (268435456 / (1000000/HZ))
-
-extern unsigned long loops_per_jiffy;
-
-static inline void _udelay(unsigned long usecs)
-{
-#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
- defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
- defined(CONFIG_COLDFIRE)
- __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
-#else
- unsigned long tmp;
-
- usecs *= 4295; /* 2**32 / 1000000 */
- __asm__ ("mulul %2,%0:%1"
- : "=d" (usecs), "=d" (tmp)
- : "d" (usecs), "1" (loops_per_jiffy*HZ));
- __delay(usecs);
-#endif
-}
-
-/*
- * Moved the udelay() function into library code, no longer inlined.
- * I had to change the algorithm because we are overflowing now on
- * the faster ColdFire parts. The code is a little bigger, so it makes
- * sense to library it.
- */
-extern void udelay(unsigned long usecs);
-
-#endif /* defined(_M68KNOMMU_DELAY_H) */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-#ifndef _M68KNOMMU_DMA_MAPPING_H
-#define _M68KNOMMU_DMA_MAPPING_H
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif /* _M68KNOMMU_DMA_MAPPING_H */
+++ /dev/null
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-//#define DMA_DEBUG 1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- * Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
- defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ 0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE 1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD 2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD 3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG 4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG 5
-/* I/O to memory, 8 bits, single-address-mode */
-#define DMA_MODE_READ_SINGLE 8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE 9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE 10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE 12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF 0x01
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF 0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG 0x00
-#define DMA_MODE_SIZE_BYTE 0x01
-#define DMA_MODE_SIZE_WORD 0x02
-#define DMA_MODE_SIZE_LINE 0x03
-
-/*
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- volatile unsigned char *dmapb;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmapb = (unsigned char *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
- dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned char *dmabp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
- dmabp = (unsigned char *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- // Clear config errors
- dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-
- // Set command register
- dmawp[MCFDMA_DCR] =
- MCFDMA_DCR_INT | // Enable completion irq
- MCFDMA_DCR_CS | // Force one xfer per request
- MCFDMA_DCR_AA | // Enable auto alignment
- // single-address-mode
- ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
- // sets s_rw (-> r/w) high if Memory to I/0
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
- // Memory to I/O or I/O to Memory
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
- // 32 bit, 16 bit or 8 bit transfers
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
- MCFDMA_DCR_SSIZE_BYTE)) |
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
- MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
- (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned short *dmawp;
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- // Determine which address registers are used for memory/device accesses
- if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
- // Source incrementing, must be memory
- dmalp[MCFDMA_SAR] = a;
- // Set dest address, must be device
- dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
- } else {
- // Destination incrementing, must be memory
- dmalp[MCFDMA_DAR] = a;
- // Set source address, must be device
- dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
- (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
- (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- unsigned short count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- count = dmawp[MCFDMA_BCR];
- return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping. For instance, with the exception of the 16-bit
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA. All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose. This puts a crimp in distinguishing between the 'device
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value. Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit. Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned int *dmalp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- // Clear config errors
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-
- // Set command register
- dmalp[MCFDMA_DMR] =
- MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
- MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
- MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
- // source static-address-mode
- ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
- // dest static-address-mode
- ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
- // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-
- dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
- (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- // Determine which address registers are used for memory/device accesses
- if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
- // Source incrementing, must be memory
- dmalp[MCFDMA_DSAR] = a;
- // Set dest address, must be device
- dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
- } else {
- // Destination incrementing, must be memory
- dmalp[MCFDMA_DDAR] = a;
- // Set source address, must be device
- dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
- (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
- (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
- unsigned int count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- count = dmalp[MCFDMA_DBCR];
- return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
-
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
- occurrence should be flagged as an error. */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#endif /* _M68K_DMA_H */
+++ /dev/null
-#ifndef __ASMm68k_ELF_H
-#define __ASMm68k_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * 68k ELF relocation types
- */
-#define R_68K_NONE 0
-#define R_68K_32 1
-#define R_68K_16 2
-#define R_68K_8 3
-#define R_68K_PC32 4
-#define R_68K_PC16 5
-#define R_68K_PC8 6
-#define R_68K_GOT32 7
-#define R_68K_GOT16 8
-#define R_68K_GOT8 9
-#define R_68K_GOT32O 10
-#define R_68K_GOT16O 11
-#define R_68K_GOT8O 12
-#define R_68K_PLT32 13
-#define R_68K_PLT16 14
-#define R_68K_PLT8 15
-#define R_68K_PLT32O 16
-#define R_68K_PLT16O 17
-#define R_68K_PLT8O 18
-#define R_68K_COPY 19
-#define R_68K_GLOB_DAT 20
-#define R_68K_JMP_SLOT 21
-#define R_68K_RELATIVE 22
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_m68kfp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_68K)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_68K
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
- passed in %a1. Although my copy of the ABI has no such statement, it
- is actually used on ASV. */
-#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE 0xD0000000UL
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- /* Bleech. */ \
- pr_reg[0] = regs->d1; \
- pr_reg[1] = regs->d2; \
- pr_reg[2] = regs->d3; \
- pr_reg[3] = regs->d4; \
- pr_reg[4] = regs->d5; \
- pr_reg[7] = regs->a0; \
- pr_reg[8] = regs->a1; \
- pr_reg[14] = regs->d0; \
- pr_reg[15] = rdusp(); \
- pr_reg[16] = 0 /* regs->orig_d0 */; \
- pr_reg[17] = regs->sr; \
- pr_reg[18] = regs->pc; \
- /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \
- { \
- struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
- pr_reg[5] = sw->d6; \
- pr_reg[6] = sw->d7; \
- pr_reg[10] = sw->a3; \
- pr_reg[11] = sw->a4; \
- pr_reg[12] = sw->a5; \
- pr_reg[13] = sw->a6; \
- }
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-#endif
+++ /dev/null
-/****************************************************************************/
-
-/*
- * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- * (C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef elia_h
-#define elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- * The serial port DTR and DCD lines are also on the Parallel I/O
- * as well, so define those too.
- */
-
-#define eLIA_DCD1 0x0001
-#define eLIA_DCD0 0x0002
-#define eLIA_DTR1 0x0004
-#define eLIA_DTR0 0x0008
-
-#define eLIA_PCIRESET 0x0020
-
-/*
- * Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif /* elia_h */
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef __M68KNOMMU_ENTRY_H
-#define __M68KNOMMU_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- * 0(sp) - d1
- * 4(sp) - d2
- * 8(sp) - d3
- * C(sp) - d4
- * 10(sp) - d5
- * 14(sp) - a0
- * 18(sp) - a1
- * 1C(sp) - a2
- * 20(sp) - d0
- * 24(sp) - orig_d0
- * 28(sp) - stack adjustment
- * 2C(sp) - [ sr ] [ format & vector ]
- * 2E(sp) - [ pc-hiword ] [ sr ]
- * 30(sp) - [ pc-loword ] [ pc-hiword ]
- * 32(sp) - [ format & vector ] [ pc-loword ]
- * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
- * M68K COLDFIRE
- */
-
-#define ALLOWINT 0xf8ff
-
-#ifdef __ASSEMBLY__
-
-/* process bits for task_struct.flags */
-PF_TRACESYS_OFF = 3
-PF_TRACESYS_BIT = 5
-PF_PTRACED_OFF = 3
-PF_PTRACED_BIT = 4
-PF_DTRACE_OFF = 1
-PF_DTRACE_BIT = 5
-
-LENOSYS = 38
-
-#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs are a2-a6 and d6-d7 preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-#ifdef CONFIG_COLDFIRE
-/*
- * This is made a little more tricky on the ColdFire. There is no
- * separate kernel and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things could happen.
- */
-.macro SAVE_ALL
- move #0x2700,%sr /* disable intrs */
- btst #5,%sp@(2) /* from user? */
- bnes 6f /* no, skip */
- movel %sp,sw_usp /* save user sp */
- addql #8,sw_usp /* remove exception */
- movel sw_ksp,%sp /* kernel sp */
- subql #8,%sp /* room for exception */
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
- movel sw_usp,%a0 /* get usp */
- movel %a0@-,%sp@(PT_PC) /* copy exception program counter */
- movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
- bra 7f
- 6:
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
- 7:
-.endm
-
-.macro RESTORE_ALL
- btst #5,%sp@(PT_SR) /* going user? */
- bnes 8f /* no, skip */
- move #0x2700,%sr /* disable intrs */
- movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- addql #8,%sp /* remove exception */
- movel %sp,sw_ksp /* save ksp */
- subql #8,sw_usp /* set exception */
- movel sw_usp,%sp /* restore usp */
- rte
- 8:
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-/*
- * Quick exception save, use current stack only.
- */
-.macro SAVE_LOCAL
- move #0x2700,%sr /* disable intrs */
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_LOCAL
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-.macro SAVE_SWITCH_STACK
- lea %sp@(-24),%sp /* 6 regs */
- moveml %a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
- moveml %sp@,%a3-%a6/%d6-%d7
- lea %sp@(24),%sp /* 6 regs */
-.endm
-
-/*
- * Software copy of the user and kernel stack pointers... Ugh...
- * Need these to get around ColdFire not having separate kernel
- * and user stack pointers.
- */
-.globl sw_usp
-.globl sw_ksp
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * Standard 68k interrupt entry and exit macros.
- */
-.macro SAVE_ALL
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- moveml %d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
- moveml %sp@+,%a0-%a2/%d1-%d5
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-.macro SAVE_SWITCH_STACK
- moveml %a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
- moveml %sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !CONFIG_COLDFIRE */
-#endif /* __ASSEMBLY__ */
-#endif /* __M68KNOMMU_ENTRY_H */
+++ /dev/null
-#include <asm-m68k/errno.h>
+++ /dev/null
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+++ /dev/null
-#include <asm-m68k/fcntl.h>
+++ /dev/null
-/*
- * include/asm-m68knommu/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __M68KNOMMU_FLAT_H__
-#define __M68KNOMMU_FLAT_H__
-
-#define flat_stack_align(sp) /* nothing needed */
-#define flat_argvp_envp_on_stack() 1
-#define flat_old_ram_flag(flags) (flags)
-#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
-#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
-#define flat_get_relocate_addr(rel) (rel)
-#define flat_set_persistent(relval, p) 0
-
-#endif /* __M68KNOMMU_FLAT_H__ */
+++ /dev/null
-#ifndef __M68KNOMMU_FPU_H
-#define __M68KNOMMU_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216/sizeof(unsigned char))
-#elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96/sizeof(unsigned char))
-#elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28/sizeof(unsigned char))
-#elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12/sizeof(unsigned char))
-#else
-/* Assume no FP unit present then... */
-#define FPSTATESIZE (2) /* dummy size */
-#endif
-
-#endif /* __M68K_FPU_H */
+++ /dev/null
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
+++ /dev/null
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS 8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __M68K_HARDIRQ_H */
+++ /dev/null
-#ifndef __M68KNOMMU_HW_IRQ_H__
-#define __M68KNOMMU_HW_IRQ_H__
-
-#endif /* __M68KNOMMU_HW_IRQ_H__ */
+++ /dev/null
-#include <asm-m68k/hwtest.h>
+++ /dev/null
-#ifndef _M68KNOMMU_IO_H
-#define _M68KNOMMU_IO_H
-
-#ifdef __KERNEL__
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-static inline unsigned short _swapw(volatile unsigned short v)
-{
- return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
- return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#define readb(addr) \
- ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
- ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
- ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline void io_outsb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap = (volatile unsigned char *) addr;
- unsigned char *bp = (unsigned char *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_outsw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned int *ap = (volatile unsigned int *) addr;
- unsigned int *bp = (unsigned int *) buf;
- while (len--)
- *ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap = (volatile unsigned char *) addr;
- unsigned char *bp = (unsigned char *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned int *ap = (volatile unsigned int *) addr;
- unsigned int *bp = (unsigned int *) buf;
- while (len--)
- *bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
-/*
- * make the short names macros so specific devices
- * can override them as required
- */
-
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-#define inb(addr) readb(addr)
-#define inw(addr) readw(addr)
-#define inl(addr) readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_IO_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#include <asm-m68k/ioctls.h>
+++ /dev/null
-#include <asm-m68k/ipcbuf.h>
+++ /dev/null
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define SYS_IRQS 256
-#define NR_IRQS SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS 8
-#define NR_IRQS (24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq) (irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
-
-#endif
+++ /dev/null
-#include <asm-m68k/linkage.h>
+++ /dev/null
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5206sim.h -- ColdFire 5206 System Integration Module support.
- *
- * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef m5206sim_h
-#define m5206sim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5206 SIM register set addresses.
- */
-#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */
-#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */
-#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */
-#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */
-#ifdef CONFIG_M5206e
-#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */
-#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */
-#endif
-
-#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */
-
-#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/
-
-#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */
-
-#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */
-#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */
-#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */
-#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */
-#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */
-#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */
-#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */
-#define MCFSIM_DMCR 0xc6 /* Default control */
-
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */
-#else
-#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
-#endif
-
-#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */
-
-/*
- * Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
- /* Clear to select T0 input */
-#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
- /* Clear to select T0 output */
-#endif
-
-/*
- * Some symbol defines for the Interrupt Control Register
- */
-#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
-#ifdef CONFIG_M5206e
-#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
-#endif
-
-#if defined(CONFIG_M5206e)
-#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */
-#endif
-
-/*
- * Macro to get and set IMR register. It is 16 bits on the 5206.
- */
-#define mcf_getimr() \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define mcf_getipr() \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-#endif /* m5206sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
- *
- * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
- */
-
-/****************************************************************************/
-#ifndef m520xsim_h
-#define m520xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5282 SIM register set addresses.
- */
-#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64
-#define MCFINT_UART0 26 /* Interrupt number for UART0 */
-#define MCFINT_UART1 27 /* Interrupt number for UART1 */
-#define MCFINT_UART2 28 /* Interrupt number for UART2 */
-#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
-#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
-
-/*
- * SDRAM configuration registers.
- */
-#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
-#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
-#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
-#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
-#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
-#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
-
-
-#define MCF_GPIO_PAR_UART (0xA4036)
-#define MCF_GPIO_PAR_FECI2C (0xA4033)
-#define MCF_GPIO_PAR_FEC (0xA4038)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
-
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
-
-#define ICR_INTRCONF 0x05
-#define MCFPIT_IMR MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
-
-/****************************************************************************/
-#endif /* m520xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m523xsim.h -- ColdFire 523x System Integration Module support.
- *
- * (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef m523xsim_h
-#define m523xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 523x SIM register set addresses.
- */
-#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
-#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_IRLR 0x18 /* */
-#define MCFINTC_IACKL 0x19 /* */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64 /* Vector base number */
-#define MCFINT_UART0 13 /* Interrupt number for UART0 */
-#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
-#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
-
-/*
- * SDRAM configuration registers.
- */
-#define MCFSIM_DCR 0x44 /* SDRAM control */
-#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
-#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
-
-/****************************************************************************/
-#endif /* m523xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m5249sim_h
-#define m5249sim_h
-/****************************************************************************/
-
-/*
- * Define the 5249 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-/*
- * General purpose IO registers (in MBAR2).
- */
-#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */
-#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */
-#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */
-#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */
-#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */
-#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */
-#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */
-#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */
-
-#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
-#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
-#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */
-
-#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */
-#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */
-#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */
-#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */
-#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */
-#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */
-#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */
-#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */
-
-#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */
-
-#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
-#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
-
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5249.
- */
-#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */
-
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- * The M5249C3 board needs a little help getting all its SIM devices
- * initialized at kernel start time. dBUG doesn't set much up, so
- * we need to do it manually.
- */
-.macro m5249c3_setup
- /*
- * Set MBAR1 and MBAR2, just incase they are not set.
- */
- movel #0x10000001,%a0
- movec %a0,%MBAR /* map MBAR region */
- subql #1,%a0 /* get MBAR address in a0 */
-
- movel #0x80000001,%a1
- movec %a1,#3086 /* map MBAR2 region */
- subql #1,%a1 /* get MBAR2 address in a1 */
-
- /*
- * Move secondary interrupts to base at 128.
- */
- moveb #0x80,%d0
- moveb %d0,0x16b(%a1) /* interrupt base register */
-
- /*
- * Work around broken CSMR0/DRAM vector problem.
- */
- movel #0x001F0021,%d0 /* disable C/I bit */
- movel %d0,0x84(%a0) /* set CSMR0 */
-
- /*
- * Disable the PLL firstly. (Who knows what state it is
- * in here!).
- */
- movel 0x180(%a1),%d0 /* get current PLL value */
- andl #0xfffffffe,%d0 /* PLL bypass first */
- movel %d0,0x180(%a1) /* set PLL register */
- nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
- /*
- * Set initial clock frequency. This assumes M5249C3 board
- * is fitted with 11.2896MHz crystal. It will program the
- * PLL for 140MHz. Lets go fast :-)
- */
- movel #0x125a40f0,%d0 /* set for 140MHz */
- movel %d0,0x180(%a1) /* set PLL register */
- orl #0x1,%d0
- movel %d0,0x180(%a1) /* set PLL register */
-#endif
-
- /*
- * Setup CS1 for ethernet controller.
- * (Setup as per M5249C3 doco).
- */
- movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
- movel %d0,0x8c(%a0)
- movel #0x001f0021,%d0 /* CS1 size of 1Mb */
- movel %d0,0x90(%a0)
- movew #0x0080,%d0 /* CS1 = 16bit port, AA */
- movew %d0,0x96(%a0)
-
- /*
- * Setup CS2 for IDE interface.
- */
- movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
- movel %d0,0x98(%a0)
- movel #0x001f0001,%d0 /* CS2 size of 1MB */
- movel %d0,0x9c(%a0)
- movew #0x0080,%d0 /* CS2 = 16bit, TA */
- movew %d0,0xa2(%a0)
-
- movel #0x00107000,%d0 /* IDEconfig1 */
- movel %d0,0x18c(%a1)
- movel #0x000c0400,%d0 /* IDEconfig2 */
- movel %d0,0x190(%a1)
-
- movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
- orl %d0,0xc(%a1) /* function GPIO19 */
- orl %d0,0x8(%a1) /* enable GPIO19 as output */
- orl %d0,0x4(%a1) /* de-assert IDE reset */
-.endm
-
-#define PLATFORM_SETUP m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif /* m5249sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5272sim.h -- ColdFire 5272 System Integration Module support.
- *
- * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef m5272sim_h
-#define m5272sim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5272 SIM register set addresses.
- */
-#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */
-#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/
-#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */
-#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */
-#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */
-
-#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */
-
-#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */
-#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */
-#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */
-#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */
-
-#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */
-#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */
-#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */
-#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */
-
-#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */
-#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */
-#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */
-#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */
-#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */
-#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */
-#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */
-#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */
-#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */
-#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */
-#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */
-#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */
-#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */
-#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */
-#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */
-#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */
-
-#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */
-#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */
-#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */
-#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */
-#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */
-#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
-#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
-
-#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */
-#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */
-#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */
-#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */
-#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */
-#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */
-#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */
-#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */
-#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */
-
-
-/****************************************************************************/
-#endif /* m5272sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
- *
- * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m527xsim_h
-#define m527xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5270/5271 SIM register set addresses.
- */
-#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
-#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_IRLR 0x18 /* */
-#define MCFINTC_IACKL 0x19 /* */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64 /* Vector base number */
-#define MCFINT_UART0 13 /* Interrupt number for UART0 */
-#define MCFINT_UART1 14 /* Interrupt number for UART1 */
-#define MCFINT_UART2 15 /* Interrupt number for UART2 */
-#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
-
-/*
- * SDRAM configuration registers.
- */
-#ifdef CONFIG_M5271
-#define MCFSIM_DCR 0x40 /* SDRAM control */
-#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
-#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
-#endif
-#ifdef CONFIG_M5275
-#define MCFSIM_DMR 0x40 /* SDRAM mode */
-#define MCFSIM_DCR 0x44 /* SDRAM control */
-#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */
-#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */
-#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */
-#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
-#endif
-
-/*
- * GPIO pins setups to enable the UARTs.
- */
-#ifdef CONFIG_M5271
-#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */
-#define UART0_ENABLE_MASK 0x000f
-#define UART1_ENABLE_MASK 0x0ff0
-#define UART2_ENABLE_MASK 0x3000
-#endif
-#ifdef CONFIG_M5275
-#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */
-#define UART0_ENABLE_MASK 0x000f
-#define UART1_ENABLE_MASK 0x00f0
-#define UART2_ENABLE_MASK 0x3f00
-#endif
-
-/****************************************************************************/
-#endif /* m527xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
- *
- * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m528xsim_h
-#define m528xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5280/5282 SIM register set addresses.
- */
-#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
-#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_IRLR 0x18 /* */
-#define MCFINTC_IACKL 0x19 /* */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64 /* Vector base number */
-#define MCFINT_UART0 13 /* Interrupt number for UART0 */
-#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
-
-/*
- * SDRAM configuration registers.
- */
-#define MCFSIM_DCR 0x44 /* SDRAM control */
-#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
-#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
-
-/*
- * Derek Cheung - 6 Feb 2005
- * add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR 0x10005C
-
-/* Interrupt Mask Register Register Low */
-#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
-
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
-#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
-#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
-#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
-
-#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
-#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
-#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL (0x0200)
-#define MCF5282_QSPI_QMR_CPHA (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT (0x8000)
-#define MCF5282_QSPI_QWR_WREN (0x4000)
-#define MCF5282_QSPI_QWR_WRTO (0x2000)
-#define MCF5282_QSPI_QWR_CSIV (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE (0x0100)
-#define MCF5282_QSPI_QIR_WCEF (0x0008)
-#define MCF5282_QSPI_QIR_ABRT (0x0004)
-#define MCF5282_QSPI_QIR_SPIF (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT (0x8000)
-#define MCF5282_QSPI_QCR_BITSE (0x4000)
-#define MCF5282_QSPI_QCR_DT (0x2000)
-#define MCF5282_QSPI_QCR_DSCK (0x1000)
-#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
-
-/****************************************************************************/
-#endif /* m528xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5307sim.h -- ColdFire 5307 System Integration Module support.
- *
- * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
- * (C) Copyright 1999, Lineo (www.lineo.com)
- *
- * Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef m5307sim_h
-#define m5307sim_h
-/****************************************************************************/
-
-/*
- * Define the 5307 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-
-#ifdef CONFIG_OLDMASK
-#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */
-#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */
-#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
-#else
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
-#endif /* CONFIG_OLDMASK */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
-
-
-/* Definition offset address for CS2-7 -- old mask 5307 */
-
-#define MCF5307_CS2 (0x400000)
-#define MCF5307_CS3 (0x600000)
-#define MCF5307_CS4 (0x800000)
-#define MCF5307_CS5 (0xA00000)
-#define MCF5307_CS6 (0xC00000)
-#define MCF5307_CS7 (0xE00000)
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-#if defined(CONFIG_M5307)
-#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */
-#endif
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- * Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
- /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
- /* Clear to select par I/O */
-
-/*
- * Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4 0x80
-#define IRQ3_LEVEL6 0x40
-#define IRQ1_LEVEL2 0x20
-
-
-/*
- * Define the Cache register flags.
- */
-#define CACR_EC (1<<31)
-#define CACR_ESB (1<<29)
-#define CACR_DPI (1<<28)
-#define CACR_HLCK (1<<27)
-#define CACR_CINVA (1<<24)
-#define CACR_DNFB (1<<10)
-#define CACR_DCM_WTHRU (0<<8)
-#define CACR_DCM_WBACK (1<<8)
-#define CACR_DCM_OFF_PRE (2<<8)
-#define CACR_DCM_OFF_IMP (3<<8)
-#define CACR_DW (1<<5)
-
-#define ACR_BASE_POS 24
-#define ACR_MASK_POS 16
-#define ACR_ENABLE (1<<15)
-#define ACR_USER (0<<13)
-#define ACR_SUPER (1<<13)
-#define ACR_ANY (2<<13)
-#define ACR_CM_WTHRU (0<<5)
-#define ACR_CM_WBACK (1<<5)
-#define ACR_CM_OFF_PRE (2<<5)
-#define ACR_CM_OFF_IMP (3<<5)
-#define ACR_WPROTECT (1<<2)
-
-/****************************************************************************/
-#endif /* m5307sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m532xsim.h -- ColdFire 5329 registers
- */
-
-/****************************************************************************/
-#ifndef m532xsim_h
-#define m532xsim_h
-/****************************************************************************/
-
-#define MCF_REG32(x) (*(volatile unsigned long *)(x))
-#define MCF_REG16(x) (*(volatile unsigned short *)(x))
-#define MCF_REG08(x) (*(volatile unsigned char *)(x))
-
-#define MCFINT_VECBASE 64
-#define MCFINT_UART0 26 /* Interrupt number for UART0 */
-#define MCFINT_UART1 27 /* Interrupt number for UART1 */
-
-#define MCF_WTM_WCR MCF_REG16(0xFC098000)
-
-/*
- * Define the 532x SIM register set addresses.
- */
-#define MCFSIM_IPRL 0xFC048004
-#define MCFSIM_IPRH 0xFC048000
-#define MCFSIM_IPR MCFSIM_IPRL
-#define MCFSIM_IMRL 0xFC04800C
-#define MCFSIM_IMRH 0xFC048008
-#define MCFSIM_IMR MCFSIM_IMRL
-#define MCFSIM_ICR0 0xFC048040
-#define MCFSIM_ICR1 0xFC048041
-#define MCFSIM_ICR2 0xFC048042
-#define MCFSIM_ICR3 0xFC048043
-#define MCFSIM_ICR4 0xFC048044
-#define MCFSIM_ICR5 0xFC048045
-#define MCFSIM_ICR6 0xFC048046
-#define MCFSIM_ICR7 0xFC048047
-#define MCFSIM_ICR8 0xFC048048
-#define MCFSIM_ICR9 0xFC048049
-#define MCFSIM_ICR10 0xFC04804A
-#define MCFSIM_ICR11 0xFC04804B
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-
-#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */
-
-#define MCFSIM_IMR_SIMR0 0xFC04801C
-#define MCFSIM_IMR_SIMR1 0xFC04C01C
-#define MCFSIM_IMR_CIMR0 0xFC04801D
-#define MCFSIM_IMR_CIMR1 0xFC04C01D
-
-#define MCFSIM_ICR_TIMER1 (0xFC048040+32)
-#define MCFSIM_ICR_TIMER2 (0xFC048040+33)
-
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define mcf_getiprl() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define mcf_getiprh() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
-
-#define mcf_enable_irq1(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
-
-#define mcf_disable_irq0(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
-
-#define mcf_disable_irq1(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
-
-/*
- * Define the Cache register flags.
- */
-#define CACR_EC (1<<31)
-#define CACR_ESB (1<<29)
-#define CACR_DPI (1<<28)
-#define CACR_HLCK (1<<27)
-#define CACR_CINVA (1<<24)
-#define CACR_DNFB (1<<10)
-#define CACR_DCM_WTHRU (0<<8)
-#define CACR_DCM_WBACK (1<<8)
-#define CACR_DCM_OFF_PRE (2<<8)
-#define CACR_DCM_OFF_IMP (3<<8)
-#define CACR_DW (1<<5)
-
-#define ACR_BASE_POS 24
-#define ACR_MASK_POS 16
-#define ACR_ENABLE (1<<15)
-#define ACR_USER (0<<13)
-#define ACR_SUPER (1<<13)
-#define ACR_ANY (2<<13)
-#define ACR_CM_WTHRU (0<<5)
-#define ACR_CM_WBACK (1<<5)
-#define ACR_CM_OFF_PRE (2<<5)
-#define ACR_CM_OFF_IMP (3<<5)
-#define ACR_WPROTECT (1<<2)
-
-/*********************************************************************
- *
- * Inter-IC (I2C) Module
- *
- *********************************************************************/
-
-/* Read/Write access macros for general use */
-#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address
-#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider
-#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control
-#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status
-#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
-
-#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F))
-
-#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable
-#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable
-#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode
-#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode
-#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
-#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start
-
-#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit
-#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
-#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy
-#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost
-#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write
-#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt
-#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053)
-
-
-/*
- * The M5329EVB board needs a help getting its devices initialized
- * at kernel start time if dBUG doesn't set it up (for example
- * it is not used), so we need to do it manually.
- */
-#ifdef __ASSEMBLER__
-.macro m5329EVB_setup
- movel #0xFC098000, %a7
- movel #0x0, (%a7)
-#define CORE_SRAM 0x80000000
-#define CORE_SRAM_SIZE 0x8000
- movel #CORE_SRAM, %d0
- addl #0x221, %d0
- movec %d0,%RAMBAR1
- movel #CORE_SRAM, %sp
- addl #CORE_SRAM_SIZE, %sp
- jsr sysinit
-.endm
-#define PLATFORM_SETUP m5329EVB_setup
-
-#endif /* __ASSEMBLER__ */
-
-/*********************************************************************
- *
- * Chip Configuration Module (CCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_CCM_CCR MCF_REG16(0xFC0A0004)
-#define MCF_CCM_RCON MCF_REG16(0xFC0A0008)
-#define MCF_CCM_CIR MCF_REG16(0xFC0A000A)
-#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010)
-#define MCF_CCM_CDR MCF_REG16(0xFC0A0012)
-#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014)
-#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016)
-
-/* Bit definitions and macros for MCF_CCM_CCR */
-#define MCF_CCM_CCR_RESERVED (0x0001)
-#define MCF_CCM_CCR_PLL_MODE (0x0003)
-#define MCF_CCM_CCR_OSC_MODE (0x0005)
-#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_CCR_LOAD (0x0021)
-#define MCF_CCM_CCR_LIMP (0x0041)
-#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_RCON */
-#define MCF_CCM_RCON_RESERVED (0x0001)
-#define MCF_CCM_RCON_PLL_MODE (0x0003)
-#define MCF_CCM_RCON_OSC_MODE (0x0005)
-#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_RCON_LOAD (0x0021)
-#define MCF_CCM_RCON_LIMP (0x0041)
-#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_CIR */
-#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0)
-#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6)
-
-/* Bit definitions and macros for MCF_CCM_MISCCR */
-#define MCF_CCM_MISCCR_USBSRC (0x0001)
-#define MCF_CCM_MISCCR_USBDIV (0x0002)
-#define MCF_CCM_MISCCR_SSI_SRC (0x0010)
-#define MCF_CCM_MISCCR_TIM_DMA (0x0020)
-#define MCF_CCM_MISCCR_SSI_PUS (0x0040)
-#define MCF_CCM_MISCCR_SSI_PUE (0x0080)
-#define MCF_CCM_MISCCR_LCD_CHEN (0x0100)
-#define MCF_CCM_MISCCR_LIMP (0x1000)
-#define MCF_CCM_MISCCR_PLL_LOCK (0x2000)
-
-/* Bit definitions and macros for MCF_CCM_CDR */
-#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0)
-#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8)
-
-/* Bit definitions and macros for MCF_CCM_UHCSR */
-#define MCF_CCM_UHCSR_XPDE (0x0001)
-#define MCF_CCM_UHCSR_UHMIE (0x0002)
-#define MCF_CCM_UHCSR_WKUP (0x0004)
-#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_CCM_UOCSR */
-#define MCF_CCM_UOCSR_XPDE (0x0001)
-#define MCF_CCM_UOCSR_UOMIE (0x0002)
-#define MCF_CCM_UOCSR_WKUP (0x0004)
-#define MCF_CCM_UOCSR_PWRFLT (0x0008)
-#define MCF_CCM_UOCSR_SEND (0x0010)
-#define MCF_CCM_UOCSR_VVLD (0x0020)
-#define MCF_CCM_UOCSR_BVLD (0x0040)
-#define MCF_CCM_UOCSR_AVLD (0x0080)
-#define MCF_CCM_UOCSR_DPPU (0x0100)
-#define MCF_CCM_UOCSR_DCR_VBUS (0x0200)
-#define MCF_CCM_UOCSR_CRG_VBUS (0x0400)
-#define MCF_CCM_UOCSR_DRV_VBUS (0x0800)
-#define MCF_CCM_UOCSR_DMPD (0x1000)
-#define MCF_CCM_UOCSR_DPPD (0x2000)
-#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14)
-
-/*********************************************************************
- *
- * DMA Timers (DTIM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000)
-#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002)
-#define MCF_DTIM0_DTER MCF_REG08(0xFC070003)
-#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004)
-#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008)
-#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C)
-#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000)
-#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002)
-#define MCF_DTIM1_DTER MCF_REG08(0xFC074003)
-#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004)
-#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008)
-#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C)
-#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000)
-#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002)
-#define MCF_DTIM2_DTER MCF_REG08(0xFC078003)
-#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004)
-#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008)
-#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C)
-#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000)
-#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002)
-#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003)
-#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004)
-#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008)
-#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C)
-#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000))
-#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000))
-#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000))
-#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000))
-#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000))
-#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_DTIM_DTMR */
-#define MCF_DTIM_DTMR_RST (0x0001)
-#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1)
-#define MCF_DTIM_DTMR_FRR (0x0008)
-#define MCF_DTIM_DTMR_ORRI (0x0010)
-#define MCF_DTIM_DTMR_OM (0x0020)
-#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6)
-#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8)
-#define MCF_DTIM_DTMR_CE_ANY (0x00C0)
-#define MCF_DTIM_DTMR_CE_FALL (0x0080)
-#define MCF_DTIM_DTMR_CE_RISE (0x0040)
-#define MCF_DTIM_DTMR_CE_NONE (0x0000)
-#define MCF_DTIM_DTMR_CLK_DTIN (0x0006)
-#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004)
-#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002)
-#define MCF_DTIM_DTMR_CLK_STOP (0x0000)
-
-/* Bit definitions and macros for MCF_DTIM_DTXMR */
-#define MCF_DTIM_DTXMR_MODE16 (0x01)
-#define MCF_DTIM_DTXMR_DMAEN (0x80)
-
-/* Bit definitions and macros for MCF_DTIM_DTER */
-#define MCF_DTIM_DTER_CAP (0x01)
-#define MCF_DTIM_DTER_REF (0x02)
-
-/* Bit definitions and macros for MCF_DTIM_DTRR */
-#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCR */
-#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCN */
-#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * FlexBus Chip Selects (FBCS)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000)
-#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004)
-#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008)
-#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C)
-#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010)
-#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014)
-#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018)
-#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C)
-#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020)
-#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024)
-#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028)
-#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C)
-#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030)
-#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034)
-#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038)
-#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C)
-#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040)
-#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044)
-#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C))
-#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C))
-#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C))
-
-/* Bit definitions and macros for MCF_FBCS_CSAR */
-#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
-
-/* Bit definitions and macros for MCF_FBCS_CSMR */
-#define MCF_FBCS_CSMR_V (0x00000001)
-#define MCF_FBCS_CSMR_WP (0x00000100)
-#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16)
-#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000)
-#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000)
-#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000)
-#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000)
-#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000)
-#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000)
-#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000)
-#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000)
-#define MCF_FBCS_CSMR_BAM_8M (0x007F0000)
-#define MCF_FBCS_CSMR_BAM_4M (0x003F0000)
-#define MCF_FBCS_CSMR_BAM_2M (0x001F0000)
-#define MCF_FBCS_CSMR_BAM_1M (0x000F0000)
-#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
-#define MCF_FBCS_CSMR_BAM_512K (0x00070000)
-#define MCF_FBCS_CSMR_BAM_256K (0x00030000)
-#define MCF_FBCS_CSMR_BAM_128K (0x00010000)
-#define MCF_FBCS_CSMR_BAM_64K (0x00000000)
-
-/* Bit definitions and macros for MCF_FBCS_CSCR */
-#define MCF_FBCS_CSCR_BSTW (0x00000008)
-#define MCF_FBCS_CSCR_BSTR (0x00000010)
-#define MCF_FBCS_CSCR_BEM (0x00000020)
-#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6)
-#define MCF_FBCS_CSCR_AA (0x00000100)
-#define MCF_FBCS_CSCR_SBM (0x00000200)
-#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10)
-#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16)
-#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18)
-#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20)
-#define MCF_FBCS_CSCR_SWSEN (0x00800000)
-#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26)
-#define MCF_FBCS_CSCR_PS_8 (0x0040)
-#define MCF_FBCS_CSCR_PS_16 (0x0080)
-#define MCF_FBCS_CSCR_PS_32 (0x0000)
-
-/*********************************************************************
- *
- * General Purpose I/O (GPIO)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D)
-#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050)
-#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051)
-#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052)
-#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053)
-#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054)
-#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055)
-#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056)
-#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058)
-#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A)
-#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C)
-#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D)
-#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E)
-#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060)
-#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064)
-#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065)
-#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068)
-#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069)
-#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A)
-#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B)
-#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C)
-#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D)
-#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E)
-#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F)
-#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070)
-#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071)
-#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
-#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01)
-#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02)
-#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04)
-#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08)
-#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10)
-#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20)
-#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40)
-#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
-#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01)
-#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02)
-#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04)
-#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08)
-#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10)
-#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20)
-#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40)
-#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
-#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01)
-#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02)
-#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04)
-#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08)
-#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
-#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BE */
-#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01)
-#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02)
-#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04)
-#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_CS */
-#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02)
-#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04)
-#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08)
-#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10)
-#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
-#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04)
-#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08)
-#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10)
-#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_UART */
-#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01)
-#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02)
-#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04)
-#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08)
-#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10)
-#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20)
-#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40)
-#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
-#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
-#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
-#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01)
-#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02)
-#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04)
-#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
-#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02)
-#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04)
-#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08)
-#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10)
-#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
-#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01)
-#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02)
-#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04)
-#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08)
-#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10)
-#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20)
-#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40)
-#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
-#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
-#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
-#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
-#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
-#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
-#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10)
-#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BE */
-#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01)
-#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02)
-#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04)
-#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_CS */
-#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02)
-#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04)
-#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08)
-#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10)
-#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
-#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080)
-#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_UART */
-#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002)
-#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004)
-#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
-#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
-#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001)
-#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002)
-#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004)
-#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008)
-#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040)
-#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080)
-#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
-#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
-#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
-#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
-#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0)
-#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
-#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
-#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
-#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
-#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
-#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
-#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
-#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0)
-
-/*********************************************************************
- *
- * Interrupt Controller (INTC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_INTC0_IPRH MCF_REG32(0xFC048000)
-#define MCF_INTC0_IPRL MCF_REG32(0xFC048004)
-#define MCF_INTC0_IMRH MCF_REG32(0xFC048008)
-#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C)
-#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010)
-#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014)
-#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A)
-#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C)
-#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D)
-#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E)
-#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F)
-#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040)
-#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041)
-#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042)
-#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043)
-#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044)
-#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045)
-#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046)
-#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047)
-#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048)
-#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049)
-#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A)
-#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B)
-#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C)
-#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D)
-#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E)
-#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F)
-#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050)
-#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051)
-#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052)
-#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053)
-#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054)
-#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055)
-#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056)
-#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057)
-#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058)
-#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059)
-#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A)
-#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B)
-#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C)
-#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D)
-#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E)
-#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F)
-#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060)
-#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061)
-#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062)
-#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063)
-#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064)
-#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065)
-#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066)
-#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067)
-#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068)
-#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069)
-#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A)
-#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B)
-#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C)
-#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D)
-#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E)
-#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F)
-#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070)
-#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071)
-#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072)
-#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073)
-#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074)
-#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075)
-#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076)
-#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077)
-#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078)
-#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079)
-#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A)
-#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B)
-#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C)
-#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D)
-#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E)
-#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F)
-#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001))
-#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0)
-#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4)
-#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8)
-#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC)
-#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0)
-#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4)
-#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8)
-#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC)
-#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004))
-#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000)
-#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004)
-#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008)
-#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C)
-#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010)
-#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014)
-#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A)
-#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C)
-#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D)
-#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E)
-#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F)
-#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040)
-#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041)
-#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042)
-#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043)
-#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044)
-#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045)
-#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046)
-#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047)
-#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048)
-#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049)
-#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A)
-#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B)
-#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C)
-#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D)
-#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E)
-#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F)
-#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050)
-#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051)
-#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052)
-#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053)
-#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054)
-#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055)
-#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056)
-#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057)
-#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058)
-#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059)
-#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A)
-#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B)
-#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C)
-#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D)
-#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E)
-#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F)
-#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060)
-#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061)
-#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062)
-#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063)
-#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064)
-#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065)
-#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066)
-#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067)
-#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068)
-#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069)
-#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A)
-#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B)
-#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C)
-#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D)
-#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E)
-#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F)
-#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070)
-#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071)
-#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072)
-#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073)
-#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074)
-#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075)
-#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076)
-#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077)
-#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078)
-#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079)
-#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A)
-#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B)
-#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C)
-#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D)
-#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E)
-#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F)
-#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001))
-#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0)
-#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4)
-#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8)
-#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC)
-#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0)
-#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4)
-#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8)
-#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC)
-#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004))
-#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000))
-#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000))
-#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000))
-#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000))
-#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000))
-#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000))
-#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000))
-#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000))
-#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000))
-#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000))
-#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000))
-#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000))
-#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000))
-#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000))
-#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000))
-#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000))
-#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000))
-#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000))
-#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000))
-#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000))
-#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000))
-#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000))
-#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000))
-#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000))
-#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000))
-#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000))
-#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000))
-#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000))
-#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000))
-#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000))
-#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000))
-#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000))
-#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000))
-#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000))
-#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000))
-#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000))
-#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000))
-#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000))
-#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000))
-#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000))
-#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000))
-#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000))
-#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000))
-#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000))
-#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000))
-#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000))
-#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000))
-#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000))
-#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000))
-#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000))
-#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000))
-#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000))
-#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000))
-#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000))
-#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000))
-#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000))
-#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000))
-#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000))
-#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000))
-#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000))
-#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000))
-#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000))
-#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000))
-#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000))
-#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000))
-#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000))
-#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000))
-#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000))
-#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000))
-#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000))
-#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000))
-#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000))
-#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000))
-#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000))
-#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000))
-#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000))
-#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000))
-#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000))
-#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000))
-#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000))
-#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000))
-#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000))
-#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_INTC_IPRH */
-#define MCF_INTC_IPRH_INT32 (0x00000001)
-#define MCF_INTC_IPRH_INT33 (0x00000002)
-#define MCF_INTC_IPRH_INT34 (0x00000004)
-#define MCF_INTC_IPRH_INT35 (0x00000008)
-#define MCF_INTC_IPRH_INT36 (0x00000010)
-#define MCF_INTC_IPRH_INT37 (0x00000020)
-#define MCF_INTC_IPRH_INT38 (0x00000040)
-#define MCF_INTC_IPRH_INT39 (0x00000080)
-#define MCF_INTC_IPRH_INT40 (0x00000100)
-#define MCF_INTC_IPRH_INT41 (0x00000200)
-#define MCF_INTC_IPRH_INT42 (0x00000400)
-#define MCF_INTC_IPRH_INT43 (0x00000800)
-#define MCF_INTC_IPRH_INT44 (0x00001000)
-#define MCF_INTC_IPRH_INT45 (0x00002000)
-#define MCF_INTC_IPRH_INT46 (0x00004000)
-#define MCF_INTC_IPRH_INT47 (0x00008000)
-#define MCF_INTC_IPRH_INT48 (0x00010000)
-#define MCF_INTC_IPRH_INT49 (0x00020000)
-#define MCF_INTC_IPRH_INT50 (0x00040000)
-#define MCF_INTC_IPRH_INT51 (0x00080000)
-#define MCF_INTC_IPRH_INT52 (0x00100000)
-#define MCF_INTC_IPRH_INT53 (0x00200000)
-#define MCF_INTC_IPRH_INT54 (0x00400000)
-#define MCF_INTC_IPRH_INT55 (0x00800000)
-#define MCF_INTC_IPRH_INT56 (0x01000000)
-#define MCF_INTC_IPRH_INT57 (0x02000000)
-#define MCF_INTC_IPRH_INT58 (0x04000000)
-#define MCF_INTC_IPRH_INT59 (0x08000000)
-#define MCF_INTC_IPRH_INT60 (0x10000000)
-#define MCF_INTC_IPRH_INT61 (0x20000000)
-#define MCF_INTC_IPRH_INT62 (0x40000000)
-#define MCF_INTC_IPRH_INT63 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IPRL */
-#define MCF_INTC_IPRL_INT0 (0x00000001)
-#define MCF_INTC_IPRL_INT1 (0x00000002)
-#define MCF_INTC_IPRL_INT2 (0x00000004)
-#define MCF_INTC_IPRL_INT3 (0x00000008)
-#define MCF_INTC_IPRL_INT4 (0x00000010)
-#define MCF_INTC_IPRL_INT5 (0x00000020)
-#define MCF_INTC_IPRL_INT6 (0x00000040)
-#define MCF_INTC_IPRL_INT7 (0x00000080)
-#define MCF_INTC_IPRL_INT8 (0x00000100)
-#define MCF_INTC_IPRL_INT9 (0x00000200)
-#define MCF_INTC_IPRL_INT10 (0x00000400)
-#define MCF_INTC_IPRL_INT11 (0x00000800)
-#define MCF_INTC_IPRL_INT12 (0x00001000)
-#define MCF_INTC_IPRL_INT13 (0x00002000)
-#define MCF_INTC_IPRL_INT14 (0x00004000)
-#define MCF_INTC_IPRL_INT15 (0x00008000)
-#define MCF_INTC_IPRL_INT16 (0x00010000)
-#define MCF_INTC_IPRL_INT17 (0x00020000)
-#define MCF_INTC_IPRL_INT18 (0x00040000)
-#define MCF_INTC_IPRL_INT19 (0x00080000)
-#define MCF_INTC_IPRL_INT20 (0x00100000)
-#define MCF_INTC_IPRL_INT21 (0x00200000)
-#define MCF_INTC_IPRL_INT22 (0x00400000)
-#define MCF_INTC_IPRL_INT23 (0x00800000)
-#define MCF_INTC_IPRL_INT24 (0x01000000)
-#define MCF_INTC_IPRL_INT25 (0x02000000)
-#define MCF_INTC_IPRL_INT26 (0x04000000)
-#define MCF_INTC_IPRL_INT27 (0x08000000)
-#define MCF_INTC_IPRL_INT28 (0x10000000)
-#define MCF_INTC_IPRL_INT29 (0x20000000)
-#define MCF_INTC_IPRL_INT30 (0x40000000)
-#define MCF_INTC_IPRL_INT31 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRH */
-#define MCF_INTC_IMRH_INT_MASK32 (0x00000001)
-#define MCF_INTC_IMRH_INT_MASK33 (0x00000002)
-#define MCF_INTC_IMRH_INT_MASK34 (0x00000004)
-#define MCF_INTC_IMRH_INT_MASK35 (0x00000008)
-#define MCF_INTC_IMRH_INT_MASK36 (0x00000010)
-#define MCF_INTC_IMRH_INT_MASK37 (0x00000020)
-#define MCF_INTC_IMRH_INT_MASK38 (0x00000040)
-#define MCF_INTC_IMRH_INT_MASK39 (0x00000080)
-#define MCF_INTC_IMRH_INT_MASK40 (0x00000100)
-#define MCF_INTC_IMRH_INT_MASK41 (0x00000200)
-#define MCF_INTC_IMRH_INT_MASK42 (0x00000400)
-#define MCF_INTC_IMRH_INT_MASK43 (0x00000800)
-#define MCF_INTC_IMRH_INT_MASK44 (0x00001000)
-#define MCF_INTC_IMRH_INT_MASK45 (0x00002000)
-#define MCF_INTC_IMRH_INT_MASK46 (0x00004000)
-#define MCF_INTC_IMRH_INT_MASK47 (0x00008000)
-#define MCF_INTC_IMRH_INT_MASK48 (0x00010000)
-#define MCF_INTC_IMRH_INT_MASK49 (0x00020000)
-#define MCF_INTC_IMRH_INT_MASK50 (0x00040000)
-#define MCF_INTC_IMRH_INT_MASK51 (0x00080000)
-#define MCF_INTC_IMRH_INT_MASK52 (0x00100000)
-#define MCF_INTC_IMRH_INT_MASK53 (0x00200000)
-#define MCF_INTC_IMRH_INT_MASK54 (0x00400000)
-#define MCF_INTC_IMRH_INT_MASK55 (0x00800000)
-#define MCF_INTC_IMRH_INT_MASK56 (0x01000000)
-#define MCF_INTC_IMRH_INT_MASK57 (0x02000000)
-#define MCF_INTC_IMRH_INT_MASK58 (0x04000000)
-#define MCF_INTC_IMRH_INT_MASK59 (0x08000000)
-#define MCF_INTC_IMRH_INT_MASK60 (0x10000000)
-#define MCF_INTC_IMRH_INT_MASK61 (0x20000000)
-#define MCF_INTC_IMRH_INT_MASK62 (0x40000000)
-#define MCF_INTC_IMRH_INT_MASK63 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRL */
-#define MCF_INTC_IMRL_INT_MASK0 (0x00000001)
-#define MCF_INTC_IMRL_INT_MASK1 (0x00000002)
-#define MCF_INTC_IMRL_INT_MASK2 (0x00000004)
-#define MCF_INTC_IMRL_INT_MASK3 (0x00000008)
-#define MCF_INTC_IMRL_INT_MASK4 (0x00000010)
-#define MCF_INTC_IMRL_INT_MASK5 (0x00000020)
-#define MCF_INTC_IMRL_INT_MASK6 (0x00000040)
-#define MCF_INTC_IMRL_INT_MASK7 (0x00000080)
-#define MCF_INTC_IMRL_INT_MASK8 (0x00000100)
-#define MCF_INTC_IMRL_INT_MASK9 (0x00000200)
-#define MCF_INTC_IMRL_INT_MASK10 (0x00000400)
-#define MCF_INTC_IMRL_INT_MASK11 (0x00000800)
-#define MCF_INTC_IMRL_INT_MASK12 (0x00001000)
-#define MCF_INTC_IMRL_INT_MASK13 (0x00002000)
-#define MCF_INTC_IMRL_INT_MASK14 (0x00004000)
-#define MCF_INTC_IMRL_INT_MASK15 (0x00008000)
-#define MCF_INTC_IMRL_INT_MASK16 (0x00010000)
-#define MCF_INTC_IMRL_INT_MASK17 (0x00020000)
-#define MCF_INTC_IMRL_INT_MASK18 (0x00040000)
-#define MCF_INTC_IMRL_INT_MASK19 (0x00080000)
-#define MCF_INTC_IMRL_INT_MASK20 (0x00100000)
-#define MCF_INTC_IMRL_INT_MASK21 (0x00200000)
-#define MCF_INTC_IMRL_INT_MASK22 (0x00400000)
-#define MCF_INTC_IMRL_INT_MASK23 (0x00800000)
-#define MCF_INTC_IMRL_INT_MASK24 (0x01000000)
-#define MCF_INTC_IMRL_INT_MASK25 (0x02000000)
-#define MCF_INTC_IMRL_INT_MASK26 (0x04000000)
-#define MCF_INTC_IMRL_INT_MASK27 (0x08000000)
-#define MCF_INTC_IMRL_INT_MASK28 (0x10000000)
-#define MCF_INTC_IMRL_INT_MASK29 (0x20000000)
-#define MCF_INTC_IMRL_INT_MASK30 (0x40000000)
-#define MCF_INTC_IMRL_INT_MASK31 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCH */
-#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001)
-#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002)
-#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004)
-#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008)
-#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010)
-#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020)
-#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040)
-#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080)
-#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100)
-#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200)
-#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400)
-#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800)
-#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000)
-#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000)
-#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000)
-#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000)
-#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000)
-#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000)
-#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000)
-#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000)
-#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000)
-#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000)
-#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000)
-#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000)
-#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000)
-#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000)
-#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000)
-#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000)
-#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000)
-#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000)
-#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000)
-#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCL */
-#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001)
-#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002)
-#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004)
-#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008)
-#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010)
-#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020)
-#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040)
-#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080)
-#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100)
-#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200)
-#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400)
-#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800)
-#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000)
-#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000)
-#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000)
-#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000)
-#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000)
-#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000)
-#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000)
-#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000)
-#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000)
-#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000)
-#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000)
-#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000)
-#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000)
-#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000)
-#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000)
-#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000)
-#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000)
-#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000)
-#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000)
-#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_ICONFIG */
-#define MCF_INTC_ICONFIG_EMASK (0x0020)
-#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200)
-#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400)
-#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800)
-#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000)
-#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000)
-#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000)
-#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000)
-
-/* Bit definitions and macros for MCF_INTC_SIMR */
-#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CIMR */
-#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CLMASK */
-#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SLMASK */
-#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_ICR */
-#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SWIACK */
-#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_INTC_LIACK */
-#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0)
-
-/********************************************************************/
-/*********************************************************************
-*
-* LCD Controller (LCDC)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000)
-#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004)
-#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008)
-#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C)
-#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010)
-#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014)
-#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018)
-#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C)
-#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020)
-#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024)
-#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028)
-#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C)
-#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030)
-#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034)
-#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038)
-#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C)
-#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040)
-#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050)
-#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054)
-#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058)
-#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C)
-#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060)
-#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064)
-#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068)
-#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800)
-#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00)
-
-/* Bit definitions and macros for MCF_LCDC_LSSAR */
-#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LSR */
-#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LVPWR */
-#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LCPR */
-#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16)
-#define MCF_LCDC_LCPR_OP (0x10000000)
-#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30)
-#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000)
-#define MCF_LCDC_LCPR_CC_OR (0x40000000)
-#define MCF_LCDC_LCPR_CC_XOR (0x80000000)
-#define MCF_LCDC_LCPR_CC_AND (0xC0000000)
-#define MCF_LCDC_LCPR_OP_ON (0x10000000)
-#define MCF_LCDC_LCPR_OP_OFF (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCWHBR */
-#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24)
-#define MCF_LCDC_LCWHBR_BK_EN (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCCMR */
-#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for MCF_LCDC_LPCR */
-#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LPCR_SHARP (0x00000040)
-#define MCF_LCDC_LPCR_SCLKSEL (0x00000080)
-#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8)
-#define MCF_LCDC_LPCR_ACDSEL (0x00008000)
-#define MCF_LCDC_LPCR_REV_VS (0x00010000)
-#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000)
-#define MCF_LCDC_LPCR_ENDSEL (0x00040000)
-#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000)
-#define MCF_LCDC_LPCR_OEPOL (0x00100000)
-#define MCF_LCDC_LPCR_CLKPOL (0x00200000)
-#define MCF_LCDC_LPCR_LPPOL (0x00400000)
-#define MCF_LCDC_LPCR_FLM (0x00800000)
-#define MCF_LCDC_LPCR_PIXPOL (0x01000000)
-#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25)
-#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28)
-#define MCF_LCDC_LPCR_COLOR (0x40000000)
-#define MCF_LCDC_LPCR_TFT (0x80000000)
-#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000)
-#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000)
-#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000)
-#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000)
-#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000)
-#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000)
-#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000)
-#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000)
-#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000)
-#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000)
-#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000)
-#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000)
-#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000)
-#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000)
-
-#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30)
-
-/* Bit definitions and macros for MCF_LCDC_LHCR */
-#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LVCR */
-#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LPOR */
-#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LPCCR */
-#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LPCCR_CC_EN (0x00000100)
-#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9)
-#define MCF_LCDC_LPCCR_LDMSK (0x00008000)
-#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16)
-#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000)
-#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000)
-#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000)
-
-/* Bit definitions and macros for MCF_LCDC_LDCR */
-#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LDCR_BURST (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LRMCR */
-#define MCF_LCDC_LRMCR_SEL_REF (0x00000001)
-
-/* Bit definitions and macros for MCF_LCDC_LICR */
-#define MCF_LCDC_LICR_INTCON (0x00000001)
-#define MCF_LCDC_LICR_INTSYN (0x00000004)
-#define MCF_LCDC_LICR_GW_INT_CON (0x00000010)
-
-/* Bit definitions and macros for MCF_LCDC_LIER */
-#define MCF_LCDC_LIER_BOF_EN (0x00000001)
-#define MCF_LCDC_LIER_EOF_EN (0x00000002)
-#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004)
-#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008)
-#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010)
-#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020)
-#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040)
-#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LISR */
-#define MCF_LCDC_LISR_BOF (0x00000001)
-#define MCF_LCDC_LISR_EOF (0x00000002)
-#define MCF_LCDC_LISR_ERR_RES (0x00000004)
-#define MCF_LCDC_LISR_UDR_ERR (0x00000008)
-#define MCF_LCDC_LISR_GW_BOF (0x00000010)
-#define MCF_LCDC_LISR_GW_EOF (0x00000020)
-#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040)
-#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSAR */
-#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSR */
-#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
-#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPOR */
-#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPR */
-#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for MCF_LCDC_LGWCR */
-#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12)
-#define MCF_LCDC_LGWCR_GW_RVS (0x00200000)
-#define MCF_LCDC_LGWCR_GWE (0x00400000)
-#define MCF_LCDC_LGWCR_GWCKE (0x00800000)
-#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for MCF_LCDC_LGWDCR */
-#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LGWDCR_GWBT (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LSCR */
-#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26)
-#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16)
-#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
-#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4)
-#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
-#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
-#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * Phase Locked Loop (PLL)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_PLL_PODR MCF_REG08(0xFC0C0000)
-#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004)
-#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008)
-#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C)
-
-/* Bit definitions and macros for MCF_PLL_PODR */
-#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0)
-#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4)
-
-/* Bit definitions and macros for MCF_PLL_PLLCR */
-#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0)
-#define MCF_PLL_PLLCR_DITHEN (0x80)
-
-/* Bit definitions and macros for MCF_PLL_PMDR */
-#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_PLL_PFDR */
-#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0)
-
-/*********************************************************************
- *
- * System Control Module Registers (SCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SCM_MPR MCF_REG32(0xFC000000)
-#define MCF_SCM_PACRA MCF_REG32(0xFC000020)
-#define MCF_SCM_PACRB MCF_REG32(0xFC000024)
-#define MCF_SCM_PACRC MCF_REG32(0xFC000028)
-#define MCF_SCM_PACRD MCF_REG32(0xFC00002C)
-#define MCF_SCM_PACRE MCF_REG32(0xFC000040)
-#define MCF_SCM_PACRF MCF_REG32(0xFC000044)
-
-#define MCF_SCM_BCR MCF_REG32(0xFC040024)
-
-/*********************************************************************
- *
- * SDRAM Controller (SDRAMC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000)
-#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004)
-#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008)
-#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C)
-#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080)
-#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100)
-#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110)
-#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114)
-#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118)
-#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C)
-#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004))
-
-/* Bit definitions and macros for MCF_SDRAMC_SDMR */
-#define MCF_SDRAMC_SDMR_CMD (0x00010000)
-#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18)
-#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30)
-#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000)
-#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCR */
-#define MCF_SDRAMC_SDCR_IPALL (0x00000002)
-#define MCF_SDRAMC_SDCR_IREF (0x00000004)
-#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12)
-#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16)
-#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000)
-#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24)
-#define MCF_SDRAMC_SDCR_REF (0x10000000)
-#define MCF_SDRAMC_SDCR_DDR (0x20000000)
-#define MCF_SDRAMC_SDCR_CKE (0x40000000)
-#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000)
-#define MCF_SDRAMC_SDCR_PS_16 (0x00002000)
-#define MCF_SDRAMC_SDCR_PS_32 (0x00000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
-#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4)
-#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12)
-#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16)
-#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24)
-#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
-#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16)
-#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24)
-#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28)
-
-/* Device Errata - LIMP mode work around */
-#define MCF_SDRAMC_REFRESH (0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDDS */
-#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0)
-#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2)
-#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4)
-#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6)
-#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCS */
-#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0)
-#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20)
-#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
-#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000)
-#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
-#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
-#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
-#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
-#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
-#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
-#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
-#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
-#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
-#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
-#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
-#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
-#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
-
-/*********************************************************************
- *
- * FlexCAN module registers
- *
- *********************************************************************/
-#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800)
-#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00)
-#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04)
-#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08)
-#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10)
-#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14)
-#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18)
-#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
-#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20)
-#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28)
-#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30)
-
-#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
-#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
-#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
-
-/*
- * FlexCAN Module Configuration Register
- */
-#define CANMCR_MDIS (0x80000000)
-#define CANMCR_FRZ (0x40000000)
-#define CANMCR_HALT (0x10000000)
-#define CANMCR_SOFTRST (0x02000000)
-#define CANMCR_FRZACK (0x01000000)
-#define CANMCR_SUPV (0x00800000)
-#define CANMCR_MAXMB(x) ((x)&0x0F)
-
-/*
- * FlexCAN Control Register
- */
-#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
-#define CANCTRL_RJW(x) (((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK (0x00008000)
-#define CANCTRL_ERRMSK (0x00004000)
-#define CANCTRL_CLKSRC (0x00002000)
-#define CANCTRL_LPB (0x00001000)
-#define CANCTRL_SAMP (0x00000080)
-#define CANCTRL_BOFFREC (0x00000040)
-#define CANCTRL_TSYNC (0x00000020)
-#define CANCTRL_LBUF (0x00000010)
-#define CANCTRL_LOM (0x00000008)
-#define CANCTRL_PROPSEG(x) ((x)&0x07)
-
-/*
- * FlexCAN Error Counter Register
- */
-#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
-#define ERRCNT_TXECTR(x) ((x)&0xFF)
-
-/*
- * FlexCAN Error and Status Register
- */
-#define ERRSTAT_BITERR(x) (((x)&0x03)<<14)
-#define ERRSTAT_ACKERR (0x00002000)
-#define ERRSTAT_CRCERR (0x00001000)
-#define ERRSTAT_FRMERR (0x00000800)
-#define ERRSTAT_STFERR (0x00000400)
-#define ERRSTAT_TXWRN (0x00000200)
-#define ERRSTAT_RXWRN (0x00000100)
-#define ERRSTAT_IDLE (0x00000080)
-#define ERRSTAT_TXRX (0x00000040)
-#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4)
-#define ERRSTAT_BOFFINT (0x00000004)
-#define ERRSTAT_ERRINT (0x00000002)
-
-/*
- * Interrupt Mask Register
- */
-#define IMASK_BUF15M (0x8000)
-#define IMASK_BUF14M (0x4000)
-#define IMASK_BUF13M (0x2000)
-#define IMASK_BUF12M (0x1000)
-#define IMASK_BUF11M (0x0800)
-#define IMASK_BUF10M (0x0400)
-#define IMASK_BUF9M (0x0200)
-#define IMASK_BUF8M (0x0100)
-#define IMASK_BUF7M (0x0080)
-#define IMASK_BUF6M (0x0040)
-#define IMASK_BUF5M (0x0020)
-#define IMASK_BUF4M (0x0010)
-#define IMASK_BUF3M (0x0008)
-#define IMASK_BUF2M (0x0004)
-#define IMASK_BUF1M (0x0002)
-#define IMASK_BUF0M (0x0001)
-#define IMASK_BUFnM(x) (0x1<<(x))
-#define IMASK_BUFF_ENABLE_ALL (0x1111)
-#define IMASK_BUFF_DISABLE_ALL (0x0000)
-
-/*
- * Interrupt Flag Register
- */
-#define IFLAG_BUF15M (0x8000)
-#define IFLAG_BUF14M (0x4000)
-#define IFLAG_BUF13M (0x2000)
-#define IFLAG_BUF12M (0x1000)
-#define IFLAG_BUF11M (0x0800)
-#define IFLAG_BUF10M (0x0400)
-#define IFLAG_BUF9M (0x0200)
-#define IFLAG_BUF8M (0x0100)
-#define IFLAG_BUF7M (0x0080)
-#define IFLAG_BUF6M (0x0040)
-#define IFLAG_BUF5M (0x0020)
-#define IFLAG_BUF4M (0x0010)
-#define IFLAG_BUF3M (0x0008)
-#define IFLAG_BUF2M (0x0004)
-#define IFLAG_BUF1M (0x0002)
-#define IFLAG_BUF0M (0x0001)
-#define IFLAG_BUFF_SET_ALL (0xFFFF)
-#define IFLAG_BUFF_CLEAR_ALL (0x0000)
-#define IFLAG_BUFnM(x) (0x1<<(x))
-
-/*
- * Message Buffers
- */
-#define MB_CNT_CODE(x) (((x)&0x0F)<<24)
-#define MB_CNT_SRR (0x00400000)
-#define MB_CNT_IDE (0x00200000)
-#define MB_CNT_RTR (0x00100000)
-#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16)
-#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF)
-#define MB_ID_STD(x) (((x)&0x07FF)<<18)
-#define MB_ID_EXT(x) ((x)&0x3FFFF)
-
-/*********************************************************************
- *
- * Edge Port Module (EPORT)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR MCF_REG08(0xFC094006)
-
-/* Bit definitions and macros for MCF_EPORT_EPPAR */
-#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
-#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
-#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
-#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
-#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
-#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
-#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
-#define MCF_EPORT_EPPAR_LEVEL (0)
-#define MCF_EPORT_EPPAR_RISING (1)
-#define MCF_EPORT_EPPAR_FALLING (2)
-#define MCF_EPORT_EPPAR_BOTH (3)
-#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000)
-#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000)
-#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000)
-#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000)
-#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000)
-#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000)
-#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400)
-#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800)
-#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00)
-#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100)
-#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200)
-#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300)
-#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040)
-#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080)
-#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0)
-#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010)
-#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020)
-#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030)
-#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004)
-#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008)
-#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C)
-
-/* Bit definitions and macros for MCF_EPORT_EPDDR */
-#define MCF_EPORT_EPDDR_EPDD1 (0x02)
-#define MCF_EPORT_EPDDR_EPDD2 (0x04)
-#define MCF_EPORT_EPDDR_EPDD3 (0x08)
-#define MCF_EPORT_EPDDR_EPDD4 (0x10)
-#define MCF_EPORT_EPDDR_EPDD5 (0x20)
-#define MCF_EPORT_EPDDR_EPDD6 (0x40)
-#define MCF_EPORT_EPDDR_EPDD7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPIER */
-#define MCF_EPORT_EPIER_EPIE1 (0x02)
-#define MCF_EPORT_EPIER_EPIE2 (0x04)
-#define MCF_EPORT_EPIER_EPIE3 (0x08)
-#define MCF_EPORT_EPIER_EPIE4 (0x10)
-#define MCF_EPORT_EPIER_EPIE5 (0x20)
-#define MCF_EPORT_EPIER_EPIE6 (0x40)
-#define MCF_EPORT_EPIER_EPIE7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPDR */
-#define MCF_EPORT_EPDR_EPD1 (0x02)
-#define MCF_EPORT_EPDR_EPD2 (0x04)
-#define MCF_EPORT_EPDR_EPD3 (0x08)
-#define MCF_EPORT_EPDR_EPD4 (0x10)
-#define MCF_EPORT_EPDR_EPD5 (0x20)
-#define MCF_EPORT_EPDR_EPD6 (0x40)
-#define MCF_EPORT_EPDR_EPD7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPPDR */
-#define MCF_EPORT_EPPDR_EPPD1 (0x02)
-#define MCF_EPORT_EPPDR_EPPD2 (0x04)
-#define MCF_EPORT_EPPDR_EPPD3 (0x08)
-#define MCF_EPORT_EPPDR_EPPD4 (0x10)
-#define MCF_EPORT_EPPDR_EPPD5 (0x20)
-#define MCF_EPORT_EPPDR_EPPD6 (0x40)
-#define MCF_EPORT_EPPDR_EPPD7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPFR */
-#define MCF_EPORT_EPFR_EPF1 (0x02)
-#define MCF_EPORT_EPFR_EPF2 (0x04)
-#define MCF_EPORT_EPFR_EPF3 (0x08)
-#define MCF_EPORT_EPFR_EPF4 (0x10)
-#define MCF_EPORT_EPFR_EPF5 (0x20)
-#define MCF_EPORT_EPFR_EPF6 (0x40)
-#define MCF_EPORT_EPFR_EPF7 (0x80)
-
-/********************************************************************/
-#endif /* m532xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5407sim.h -- ColdFire 5407 System Integration Module support.
- *
- * (C) Copyright 2000, Lineo (www.lineo.com)
- * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
- *
- * Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef m5407sim_h
-#define m5407sim_h
-/****************************************************************************/
-
-/*
- * Define the 5407 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- * Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
- /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
- /* Clear to select par I/O */
-
-/*
- * Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4 0x80
-#define IRQ3_LEVEL6 0x40
-#define IRQ1_LEVEL2 0x20
-
-
-/*
- * Define the Cache register flags.
- */
-#define CACR_DEC 0x80000000 /* Enable data cache */
-#define CACR_DWP 0x40000000 /* Data write protection */
-#define CACR_DESB 0x20000000 /* Enable data store buffer */
-#define CACR_DDPI 0x10000000 /* Disable CPUSHL */
-#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
-#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
-#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
-#define CACR_DDCM_P 0x04000000 /* No cache, precise */
-#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
-#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
-#define CACR_BEC 0x00080000 /* Enable branch cache */
-#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
-#define CACR_IEC 0x00008000 /* Enable instruction cache */
-#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
-#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
-#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
-#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
-#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
-
-#define ACR_BASE_POS 24 /* Address Base */
-#define ACR_MASK_POS 16 /* Address Mask */
-#define ACR_ENABLE 0x00008000 /* Enable address */
-#define ACR_USER 0x00000000 /* User mode access only */
-#define ACR_SUPER 0x00002000 /* Supervisor mode only */
-#define ACR_ANY 0x00004000 /* Match any access mode */
-#define ACR_CM_WT 0x00000000 /* Write through mode */
-#define ACR_CM_CP 0x00000020 /* Copyback mode */
-#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
-#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
-#define ACR_WPROTECT 0x00000004 /* Write protect */
-
-/****************************************************************************/
-#endif /* m5407sim_h */
+++ /dev/null
-#include "m68360_regs.h"
-#include "m68360_pram.h"
-#include "m68360_quicc.h"
-#include "m68360_enet.h"
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT 4
-
-/* see MC68360 User's Manual, p. 7-377 */
-#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
+++ /dev/null
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include "quicc_simple.h"
-
-/*
- * transmit BD's
- */
-#define T_R 0x8000 /* ready bit */
-#define E_T_PAD 0x4000 /* short frame padding */
-#define T_W 0x2000 /* wrap bit */
-#define T_I 0x1000 /* interrupt on completion */
-#define T_L 0x0800 /* last in frame */
-#define T_TC 0x0400 /* transmit CRC (when last) */
-
-#define T_DEF 0x0200 /* defer indication */
-#define T_HB 0x0100 /* heartbeat */
-#define T_LC 0x0080 /* error: late collision */
-#define T_RL 0x0040 /* error: retransmission limit */
-#define T_RC 0x003c /* retry count */
-#define T_UN 0x0002 /* error: underrun */
-#define T_CSL 0x0001 /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E 0x8000 /* buffer empty */
-#define R_W 0x2000 /* wrap bit */
-#define R_I 0x1000 /* interrupt on reception */
-#define R_L 0x0800 /* last BD in frame */
-#define R_F 0x0400 /* first BD in frame */
-#define R_M 0x0100 /* received because of promisc. mode */
-
-#define R_LG 0x0020 /* frame too long */
-#define R_NO 0x0010 /* non-octet aligned */
-#define R_SH 0x0008 /* short frame */
-#define R_CR 0x0004 /* receive CRC error */
-#define R_OV 0x0002 /* receive overrun */
-#define R_CL 0x0001 /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA 0x0080 /* graceful stop complete */
-#define ETHERNET_TXE 0x0010 /* transmit error */
-#define ETHERNET_RXF 0x0008 /* receive frame */
-#define ETHERNET_BSY 0x0004 /* busy condition */
-#define ETHERNET_TXB 0x0002 /* transmit buffer */
-#define ETHERNET_RXB 0x0001 /* receive buffer */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC 0x8000 /* heartbeat checking */
-#define ETHER_FC 0x4000 /* force collision */
-#define ETHER_RSH 0x2000 /* receive short frames */
-#define ETHER_IAM 0x1000 /* individual address mode */
-#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */
-#define ETHER_PRO 0x0200 /* promiscuous */
-#define ETHER_BRO 0x0100 /* broadcast address */
-#define ETHER_SBT 0x0080 /* stop backoff timer */
-#define ETHER_LPB 0x0040 /* Loop Back Mode */
-#define ETHER_SIP 0x0020 /* sample input pins */
-#define ETHER_LCW 0x0010 /* late collision window */
-#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */
-#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */
-#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */
-#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */
-#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */
-#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */
-#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */
-#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4 /* Length in bytes of CRC */
-#define C_PRES 0xffffffff /* preform 32 bit CRC */
-#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */
-#define CRCEC 0x00000000
-#define ALEC 0x00000000
-#define DISFC 0x00000000
-#define PADS 0x00000000
-#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee /* 1518 max frame size */
-#define MINFLR 0x0040 /* Minimum frame size 64 */
-#define MAXD1 0x05ee /* Max dma count 1518 */
-#define MAXD2 0x05ee
-#define GADDR1 0x00000000 /* Clear group address */
-#define GADDR2 0x00000000
-#define GADDR3 0x00000000
-#define GADDR4 0x00000000
-#define P_PER 0x00000000 /*not used */
-#define IADDR1 0x00000000 /* Individual hash table not used */
-#define IADDR2 0x00000000
-#define IADDR3 0x00000000
-#define IADDR4 0x00000000
-#define TADDR_H 0x00000000 /* clear this regs */
-#define TADDR_M 0x00000000
-#define TADDR_L 0x00000000
-
-/* SCC Parameter Ram */
-#define RFCR 0x18 /* normal operation */
-#define TFCR 0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
- unsigned char b[6];
- struct {
- unsigned short high;
- unsigned short middl;
- unsigned short low;
- } w;
-} ETHER_ADDR;
-
-typedef struct {
- int max_frame_length;
- int promisc_mode;
- int reject_broadcast;
- ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
- ETHER_ADDR dst_addr;
- ETHER_ADDR src_addr;
- unsigned short type_or_len;
- unsigned char data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
- ETHER_ADDR dst_addr;
- ETHER_ADDR src_addr;
- unsigned short type_or_len;
- unsigned char data[MAX_DATALEN];
- unsigned char fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int scc_number,
- alloc_routine *alloc_buffer,
- free_routine *free_buffer,
- store_rx_buffer_routine *store_rx_buffer,
- handle_tx_error_routine *handle_tx_error,
- handle_rx_error_routine *handle_rx_error,
- handle_lost_error_routine *handle_lost_error,
- ETHER_SPECIFIC *ether_spec);
-int ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
+++ /dev/null
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT 0x8000
-#define WRAP_SLOT 0x4000
-
-/*****************************************************************
- Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
- /*
- * Global Multichannel parameter RAM
- */
- unsigned long mcbase; /* Multichannel Base pointer */
- unsigned short qmcstate; /* Multichannel Controller state */
- unsigned short mrblr; /* Maximum Receive Buffer Length */
- unsigned short tx_s_ptr; /* TSTATx Pointer */
- unsigned short rxptr; /* Current Time slot entry in TSATRx */
- unsigned short grfthr; /* Global Receive frame threshold */
- unsigned short grfcnt; /* Global Receive Frame Count */
- unsigned long intbase; /* Multichannel Base address */
- unsigned long iintptr; /* Pointer to interrupt queue */
- unsigned short rx_s_ptr; /* TSTARx Pointer */
-
- unsigned short txptr; /* Current Time slot entry in TSATTx */
- unsigned long c_mask32; /* CRC Constant (debb20e3) */
- unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */
- unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */
- unsigned short c_mask16; /* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
- Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
- unsigned short tbase; /* Tx Buffer Descriptors Base Address */
- unsigned short chamr; /* Channel Mode Register */
- unsigned long tstate; /* Tx Internal State */
- unsigned long txintr; /* Tx Internal Data Pointer */
- unsigned short tbptr; /* Tx Buffer Descriptor Pointer */
- unsigned short txcntr; /* Tx Internal Byte Count */
- unsigned long tupack; /* (Tx Temp) */
- unsigned long zistate; /* Zero Insertion machine state */
- unsigned long tcrc; /* Temp Transmit CRC */
- unsigned short intmask; /* Channel's interrupt mask flags */
- unsigned short bdflags;
- unsigned short rbase; /* Rx Buffer Descriptors Base Address */
- unsigned short mflr; /* Max Frame Length Register */
- unsigned long rstate; /* Rx Internal State */
- unsigned long rxintr; /* Rx Internal Data Pointer */
- unsigned short rbptr; /* Rx Buffer Descriptor Pointer */
- unsigned short rxbyc; /* Rx Internal Byte Count */
- unsigned long rpack; /* (Rx Temp) */
- unsigned long zdstate; /* Zero Deletion machine state */
- unsigned long rcrc; /* Temp Transmit CRC */
- unsigned short maxc; /* Max_length counter */
- unsigned short tmp_mb; /* Temp */
-};
-
-
-/*****************************************************************
- HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * HDLC specific parameter RAM
- */
- unsigned char RESERVED1[4]; /* Reserved area */
- unsigned long c_mask; /* CRC constant */
- unsigned long c_pres; /* CRC preset */
- unsigned short disfc; /* discarded frame counter */
- unsigned short crcec; /* CRC error counter */
- unsigned short abtsc; /* abort sequence counter */
- unsigned short nmarc; /* nonmatching address rx cnt */
- unsigned short retrc; /* frame retransmission cnt */
- unsigned short mflr; /* maximum frame length reg */
- unsigned short max_cnt; /* maximum length counter */
- unsigned short rfthr; /* received frames threshold */
- unsigned short rfcnt; /* received frames count */
- unsigned short hmask; /* user defined frm addr mask */
- unsigned short haddr1; /* user defined frm address 1 */
- unsigned short haddr2; /* user defined frm address 2 */
- unsigned short haddr3; /* user defined frm address 3 */
- unsigned short haddr4; /* user defined frm address 4 */
- unsigned short tmp; /* temp */
- unsigned short tmp_mb; /* temp */
-};
-
-
-
-/*****************************************************************
- UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID 0x8000 /* control character is valid */
-#define CC_REJ 0x4000 /* don't store char in buffer */
-#define CC_CHAR 0x00ff /* control character */
-
-/* UART */
-struct uart_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rx_temp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * UART specific parameter RAM
- */
- unsigned char RESERVED1[8]; /* Reserved area */
- unsigned short max_idl; /* maximum idle characters */
- unsigned short idlc; /* rx idle counter (internal) */
- unsigned short brkcr; /* break count register */
-
- unsigned short parec; /* Rx parity error counter */
- unsigned short frmer; /* Rx framing error counter */
- unsigned short nosec; /* Rx noise counter */
- unsigned short brkec; /* Rx break character counter */
- unsigned short brkln; /* Reaceive break length */
-
- unsigned short uaddr1; /* address character 1 */
- unsigned short uaddr2; /* address character 2 */
- unsigned short rtemp; /* temp storage */
- unsigned short toseq; /* Tx out of sequence char */
- unsigned short cc[8]; /* Rx control characters */
- unsigned short rccm; /* Rx control char mask */
- unsigned short rccr; /* Rx control char register */
- unsigned short rlbc; /* Receive last break char */
-};
-
-
-
-/*****************************************************************
- BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * BISYNC specific parameter RAM
- */
- unsigned char RESERVED1[4]; /* Reserved area */
- unsigned long crcc; /* CRC Constant Temp Value */
- unsigned short prcrc; /* Preset Receiver CRC-16/LRC */
- unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */
- unsigned short parec; /* Receive Parity Error Counter */
- unsigned short bsync; /* BISYNC SYNC Character */
- unsigned short bdle; /* BISYNC DLE Character */
- unsigned short cc[8]; /* Rx control characters */
- unsigned short rccm; /* Receive Control Character Mask */
-};
-
-/*****************************************************************
- IOM2 parameter RAM
- (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
- unsigned short ci_data; /* ci data */
- unsigned short monitor_data; /* monitor data */
- unsigned short tstate; /* transmitter state */
- unsigned short rstate; /* receiver state */
-};
-
-/*****************************************************************
- SPI/SMC parameter RAM
- (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R 0x8000 /* Ready bit in BD */
-
-struct spi_pram {
- unsigned short rbase; /* Rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
-};
-
-struct smc_uart_pram {
- unsigned short rbase; /* Rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned short max_idl; /* Maximum IDLE Characters */
- unsigned short idlc; /* Temporary IDLE Counter */
- unsigned short brkln; /* Last Rx Break Length */
- unsigned short brkec; /* Rx Break Condition Counter */
- unsigned short brkcr; /* Break Count Register (Tx) */
- unsigned short r_mask; /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
- unsigned short rbase; /* rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned short reserved[5]; /* Reserved */
-};
-
-struct idma_pram {
- unsigned short ibase; /* IDMA BD Base Address */
- unsigned short ibptr; /* IDMA buffer descriptor pointer */
- unsigned long istate; /* IDMA internal state */
- unsigned long itemp; /* IDMA temp */
-};
-
-struct ethernet_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * ETHERNET specific parameter RAM
- */
- unsigned long c_pres; /* preset CRC */
- unsigned long c_mask; /* constant mask for CRC */
- unsigned long crcec; /* CRC error counter */
- unsigned long alec; /* alighnment error counter */
- unsigned long disfc; /* discard frame counter */
- unsigned short pads; /* short frame PAD characters */
- unsigned short ret_lim; /* retry limit threshold */
- unsigned short ret_cnt; /* retry limit counter */
- unsigned short mflr; /* maximum frame length reg */
- unsigned short minflr; /* minimum frame length reg */
- unsigned short maxd1; /* maximum DMA1 length reg */
- unsigned short maxd2; /* maximum DMA2 length reg */
- unsigned short maxd; /* rx max DMA */
- unsigned short dma_cnt; /* rx dma counter */
- unsigned short max_b; /* max bd byte count */
- unsigned short gaddr1; /* group address filter 1 */
- unsigned short gaddr2; /* group address filter 2 */
- unsigned short gaddr3; /* group address filter 3 */
- unsigned short gaddr4; /* group address filter 4 */
- unsigned long tbuf0_data0; /* save area 0 - current frm */
- unsigned long tbuf0_data1; /* save area 1 - current frm */
- unsigned long tbuf0_rba0;
- unsigned long tbuf0_crc;
- unsigned short tbuf0_bcnt;
- union {
- unsigned char b[6];
- struct {
- unsigned short high;
- unsigned short middl;
- unsigned short low;
- } w;
- } paddr;
- unsigned short p_per; /* persistence */
- unsigned short rfbd_ptr; /* rx first bd pointer */
- unsigned short tfbd_ptr; /* tx first bd pointer */
- unsigned short tlbd_ptr; /* tx last bd pointer */
- unsigned long tbuf1_data0; /* save area 0 - next frame */
- unsigned long tbuf1_data1; /* save area 1 - next frame */
- unsigned long tbuf1_rba0;
- unsigned long tbuf1_crc;
- unsigned short tbuf1_bcnt;
- unsigned short tx_len; /* tx frame length counter */
- unsigned short iaddr1; /* individual address filter 1*/
- unsigned short iaddr2; /* individual address filter 2*/
- unsigned short iaddr3; /* individual address filter 3*/
- unsigned short iaddr4; /* individual address filter 4*/
- unsigned short boff_cnt; /* back-off counter */
- unsigned short taddr_h; /* temp address (MSB) */
- unsigned short taddr_m; /* temp address */
- unsigned short taddr_l; /* temp address (LSB) */
-};
-
-struct transparent_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * TRANSPARENT specific parameter RAM
- */
- unsigned long crc_p; /* CRC Preset */
- unsigned long crc_c; /* CRC constant */
-};
-
-struct timer_pram {
- /*
- * RISC timers parameter RAM
- */
- unsigned short tm_base; /* RISC timer table base adr */
- unsigned short tm_ptr; /* RISC timer table pointer */
- unsigned short r_tmr; /* RISC timer mode register */
- unsigned short r_tmv; /* RISC timer valid register */
- unsigned long tm_cmd; /* RISC timer cmd register */
- unsigned long tm_cnt; /* RISC timer internal cnt */
-};
-
-#endif
+++ /dev/null
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
- volatile unsigned short status;
- volatile unsigned short length;
- volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
- /* BASE + 0x000: user data memory */
- volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/
- volatile unsigned char udata_bd[0x200]; /*user data Ucode */
- volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */
- volatile unsigned char RESERVED1[0x500]; /* Reserved area */
-};
-#else
-struct user_data {
- /* BASE + 0x000: user data memory */
- volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
- volatile unsigned char udata_bd1[0x200]; /* user, bds */
- volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
- volatile unsigned char udata_bd2[0x100]; /* user, bds */
- volatile unsigned char RESERVED1[0x400]; /* Reserved area */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
- union {
- struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */
- struct user_data u;
- }ch_or_u; /* multipul or user space */
-
- /* BASE + 0xc00: PARAMETER RAM */
- union {
- struct scc_pram {
- union {
- struct hdlc_pram h;
- struct uart_pram u;
- struct bisync_pram b;
- struct transparent_pram t;
- unsigned char RESERVED66[0x70];
- } pscc; /* scc parameter area (protocol dependent) */
- union {
- struct {
- unsigned char RESERVED70[0x10];
- struct spi_pram spi;
- unsigned char RESERVED72[0x8];
- struct timer_pram timer;
- } timer_spi;
- struct {
- struct idma_pram idma;
- unsigned char RESERVED67[0x4];
- union {
- struct smc_uart_pram u;
- struct smc_trnsp_pram t;
- } psmc;
- } idma_smc;
- } pothers;
- } scc;
- struct ethernet_pram enet_scc;
- struct global_multi_pram m;
- unsigned char pr[0x100];
- } pram[4];
-
- /* reserved */
-
- /* BASE + 0x1000: INTERNAL REGISTERS */
- /* SIM */
- volatile unsigned long sim_mcr; /* module configuration reg */
- volatile unsigned short sim_simtr; /* module test register */
- volatile unsigned char RESERVED2[0x2]; /* Reserved area */
- volatile unsigned char sim_avr; /* auto vector reg */
- volatile unsigned char sim_rsr; /* reset status reg */
- volatile unsigned char RESERVED3[0x2]; /* Reserved area */
- volatile unsigned char sim_clkocr; /* CLCO control register */
- volatile unsigned char RESERVED62[0x3]; /* Reserved area */
- volatile unsigned short sim_pllcr; /* PLL control register */
- volatile unsigned char RESERVED63[0x2]; /* Reserved area */
- volatile unsigned short sim_cdvcr; /* Clock devider control register */
- volatile unsigned short sim_pepar; /* Port E pin assignment register */
- volatile unsigned char RESERVED64[0xa]; /* Reserved area */
- volatile unsigned char sim_sypcr; /* system protection control*/
- volatile unsigned char sim_swiv; /* software interrupt vector*/
- volatile unsigned char RESERVED6[0x2]; /* Reserved area */
- volatile unsigned short sim_picr; /* periodic interrupt control reg */
- volatile unsigned char RESERVED7[0x2]; /* Reserved area */
- volatile unsigned short sim_pitr; /* periodic interrupt timing reg */
- volatile unsigned char RESERVED8[0x3]; /* Reserved area */
- volatile unsigned char sim_swsr; /* software service */
- volatile unsigned long sim_bkar; /* breakpoint address register*/
- volatile unsigned long sim_bkcr; /* breakpoint control register*/
- volatile unsigned char RESERVED10[0x8]; /* Reserved area */
- /* MEMC */
- volatile unsigned long memc_gmr; /* Global memory register */
- volatile unsigned short memc_mstat; /* MEMC status register */
- volatile unsigned char RESERVED11[0xa]; /* Reserved area */
- volatile unsigned long memc_br0; /* base register 0 */
- volatile unsigned long memc_or0; /* option register 0 */
- volatile unsigned char RESERVED12[0x8]; /* Reserved area */
- volatile unsigned long memc_br1; /* base register 1 */
- volatile unsigned long memc_or1; /* option register 1 */
- volatile unsigned char RESERVED13[0x8]; /* Reserved area */
- volatile unsigned long memc_br2; /* base register 2 */
- volatile unsigned long memc_or2; /* option register 2 */
- volatile unsigned char RESERVED14[0x8]; /* Reserved area */
- volatile unsigned long memc_br3; /* base register 3 */
- volatile unsigned long memc_or3; /* option register 3 */
- volatile unsigned char RESERVED15[0x8]; /* Reserved area */
- volatile unsigned long memc_br4; /* base register 3 */
- volatile unsigned long memc_or4; /* option register 3 */
- volatile unsigned char RESERVED16[0x8]; /* Reserved area */
- volatile unsigned long memc_br5; /* base register 3 */
- volatile unsigned long memc_or5; /* option register 3 */
- volatile unsigned char RESERVED17[0x8]; /* Reserved area */
- volatile unsigned long memc_br6; /* base register 3 */
- volatile unsigned long memc_or6; /* option register 3 */
- volatile unsigned char RESERVED18[0x8]; /* Reserved area */
- volatile unsigned long memc_br7; /* base register 3 */
- volatile unsigned long memc_or7; /* option register 3 */
- volatile unsigned char RESERVED9[0x28]; /* Reserved area */
- /* TEST */
- volatile unsigned short test_tstmra; /* master shift a */
- volatile unsigned short test_tstmrb; /* master shift b */
- volatile unsigned short test_tstsc; /* shift count */
- volatile unsigned short test_tstrc; /* repetition counter */
- volatile unsigned short test_creg; /* control */
- volatile unsigned short test_dreg; /* destributed register */
- volatile unsigned char RESERVED58[0x404]; /* Reserved area */
- /* IDMA1 */
- volatile unsigned short idma_iccr; /* channel configuration reg*/
- volatile unsigned char RESERVED19[0x2]; /* Reserved area */
- volatile unsigned short idma1_cmr; /* dma mode reg */
- volatile unsigned char RESERVED68[0x2]; /* Reserved area */
- volatile unsigned long idma1_sapr; /* dma source addr ptr */
- volatile unsigned long idma1_dapr; /* dma destination addr ptr */
- volatile unsigned long idma1_bcr; /* dma byte count reg */
- volatile unsigned char idma1_fcr; /* function code reg */
- volatile unsigned char RESERVED20; /* Reserved area */
- volatile unsigned char idma1_cmar; /* channel mask reg */
- volatile unsigned char RESERVED21; /* Reserved area */
- volatile unsigned char idma1_csr; /* channel status reg */
- volatile unsigned char RESERVED22[0x3]; /* Reserved area */
- /* SDMA */
- volatile unsigned char sdma_sdsr; /* status reg */
- volatile unsigned char RESERVED23; /* Reserved area */
- volatile unsigned short sdma_sdcr; /* configuration reg */
- volatile unsigned long sdma_sdar; /* address reg */
- /* IDMA2 */
- volatile unsigned char RESERVED69[0x2]; /* Reserved area */
- volatile unsigned short idma2_cmr; /* dma mode reg */
- volatile unsigned long idma2_sapr; /* dma source addr ptr */
- volatile unsigned long idma2_dapr; /* dma destination addr ptr */
- volatile unsigned long idma2_bcr; /* dma byte count reg */
- volatile unsigned char idma2_fcr; /* function code reg */
- volatile unsigned char RESERVED24; /* Reserved area */
- volatile unsigned char idma2_cmar; /* channel mask reg */
- volatile unsigned char RESERVED25; /* Reserved area */
- volatile unsigned char idma2_csr; /* channel status reg */
- volatile unsigned char RESERVED26[0x7]; /* Reserved area */
- /* Interrupt Controller */
- volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/
- volatile unsigned long intr_cipr; /* CP interrupt pending reg */
- volatile unsigned long intr_cimr; /* CP interrupt mask reg */
- volatile unsigned long intr_cisr; /* CP interrupt in service reg*/
- /* Parallel I/O */
- volatile unsigned short pio_padir; /* port A data direction reg */
- volatile unsigned short pio_papar; /* port A pin assignment reg */
- volatile unsigned short pio_paodr; /* port A open drain reg */
- volatile unsigned short pio_padat; /* port A data register */
- volatile unsigned char RESERVED28[0x8]; /* Reserved area */
- volatile unsigned short pio_pcdir; /* port C data direction reg*/
- volatile unsigned short pio_pcpar; /* port C pin assignment reg*/
- volatile unsigned short pio_pcso; /* port C special options */
- volatile unsigned short pio_pcdat; /* port C data register */
- volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */
- volatile unsigned char RESERVED29[0x16]; /* Reserved area */
- /* Timer */
- volatile unsigned short timer_tgcr; /* timer global configuration reg */
- volatile unsigned char RESERVED30[0xe]; /* Reserved area */
- volatile unsigned short timer_tmr1; /* timer 1 mode reg */
- volatile unsigned short timer_tmr2; /* timer 2 mode reg */
- volatile unsigned short timer_trr1; /* timer 1 referance reg */
- volatile unsigned short timer_trr2; /* timer 2 referance reg */
- volatile unsigned short timer_tcr1; /* timer 1 capture reg */
- volatile unsigned short timer_tcr2; /* timer 2 capture reg */
- volatile unsigned short timer_tcn1; /* timer 1 counter reg */
- volatile unsigned short timer_tcn2; /* timer 2 counter reg */
- volatile unsigned short timer_tmr3; /* timer 3 mode reg */
- volatile unsigned short timer_tmr4; /* timer 4 mode reg */
- volatile unsigned short timer_trr3; /* timer 3 referance reg */
- volatile unsigned short timer_trr4; /* timer 4 referance reg */
- volatile unsigned short timer_tcr3; /* timer 3 capture reg */
- volatile unsigned short timer_tcr4; /* timer 4 capture reg */
- volatile unsigned short timer_tcn3; /* timer 3 counter reg */
- volatile unsigned short timer_tcn4; /* timer 4 counter reg */
- volatile unsigned short timer_ter1; /* timer 1 event reg */
- volatile unsigned short timer_ter2; /* timer 2 event reg */
- volatile unsigned short timer_ter3; /* timer 3 event reg */
- volatile unsigned short timer_ter4; /* timer 4 event reg */
- volatile unsigned char RESERVED34[0x8]; /* Reserved area */
- /* CP */
- volatile unsigned short cp_cr; /* command register */
- volatile unsigned char RESERVED35[0x2]; /* Reserved area */
- volatile unsigned short cp_rccr; /* main configuration reg */
- volatile unsigned char RESERVED37; /* Reserved area */
- volatile unsigned char cp_rmds; /* development support status reg */
- volatile unsigned long cp_rmdr; /* development support control reg */
- volatile unsigned short cp_rctr1; /* ram break register 1 */
- volatile unsigned short cp_rctr2; /* ram break register 2 */
- volatile unsigned short cp_rctr3; /* ram break register 3 */
- volatile unsigned short cp_rctr4; /* ram break register 4 */
- volatile unsigned char RESERVED59[0x2]; /* Reserved area */
- volatile unsigned short cp_rter; /* RISC timers event reg */
- volatile unsigned char RESERVED38[0x2]; /* Reserved area */
- volatile unsigned short cp_rtmr; /* RISC timers mask reg */
- volatile unsigned char RESERVED39[0x14]; /* Reserved area */
- /* BRG */
- union {
- volatile unsigned long l;
- struct {
- volatile unsigned short BRGC_RESERV:14;
- volatile unsigned short rst:1;
- volatile unsigned short en:1;
- volatile unsigned short extc:2;
- volatile unsigned short atb:1;
- volatile unsigned short cd:12;
- volatile unsigned short div16:1;
- } b;
- } brgc[4]; /* BRG1-BRG4 configuration regs*/
- /* SCC registers */
- struct scc_regs {
- union {
- struct {
- /* Low word. */
- volatile unsigned short GSMR_RESERV2:1;
- volatile unsigned short edge:2;
- volatile unsigned short tci:1;
- volatile unsigned short tsnc:2;
- volatile unsigned short rinv:1;
- volatile unsigned short tinv:1;
- volatile unsigned short tpl:3;
- volatile unsigned short tpp:2;
- volatile unsigned short tend:1;
- volatile unsigned short tdcr:2;
- volatile unsigned short rdcr:2;
- volatile unsigned short renc:3;
- volatile unsigned short tenc:3;
- volatile unsigned short diag:2;
- volatile unsigned short enr:1;
- volatile unsigned short ent:1;
- volatile unsigned short mode:4;
- /* High word. */
- volatile unsigned short GSMR_RESERV1:14;
- volatile unsigned short pri:1;
- volatile unsigned short gde:1;
- volatile unsigned short tcrc:2;
- volatile unsigned short revd:1;
- volatile unsigned short trx:1;
- volatile unsigned short ttx:1;
- volatile unsigned short cdp:1;
- volatile unsigned short ctsp:1;
- volatile unsigned short cds:1;
- volatile unsigned short ctss:1;
- volatile unsigned short tfl:1;
- volatile unsigned short rfw:1;
- volatile unsigned short txsy:1;
- volatile unsigned short synl:2;
- volatile unsigned short rtsm:1;
- volatile unsigned short rsyn:1;
- } b;
- struct {
- volatile unsigned long low;
- volatile unsigned long high;
- } w;
- } scc_gsmr; /* SCC general mode reg */
- volatile unsigned short scc_psmr; /* protocol specific mode reg */
- volatile unsigned char RESERVED42[0x2]; /* Reserved area */
- volatile unsigned short scc_todr; /* SCC transmit on demand */
- volatile unsigned short scc_dsr; /* SCC data sync reg */
- volatile unsigned short scc_scce; /* SCC event reg */
- volatile unsigned char RESERVED43[0x2];/* Reserved area */
- volatile unsigned short scc_sccm; /* SCC mask reg */
- volatile unsigned char RESERVED44[0x1];/* Reserved area */
- volatile unsigned char scc_sccs; /* SCC status reg */
- volatile unsigned char RESERVED45[0x8]; /* Reserved area */
- } scc_regs[4];
- /* SMC */
- struct smc_regs {
- volatile unsigned char RESERVED46[0x2]; /* Reserved area */
- volatile unsigned short smc_smcmr; /* SMC mode reg */
- volatile unsigned char RESERVED60[0x2]; /* Reserved area */
- volatile unsigned char smc_smce; /* SMC event reg */
- volatile unsigned char RESERVED47[0x3]; /* Reserved area */
- volatile unsigned char smc_smcm; /* SMC mask reg */
- volatile unsigned char RESERVED48[0x5]; /* Reserved area */
- } smc_regs[2];
- /* SPI */
- volatile unsigned short spi_spmode; /* SPI mode reg */
- volatile unsigned char RESERVED51[0x4]; /* Reserved area */
- volatile unsigned char spi_spie; /* SPI event reg */
- volatile unsigned char RESERVED52[0x3]; /* Reserved area */
- volatile unsigned char spi_spim; /* SPI mask reg */
- volatile unsigned char RESERVED53[0x2]; /* Reserved area */
- volatile unsigned char spi_spcom; /* SPI command reg */
- volatile unsigned char RESERVED54[0x4]; /* Reserved area */
- /* PIP */
- volatile unsigned short pip_pipc; /* pip configuration reg */
- volatile unsigned char RESERVED65[0x2]; /* Reserved area */
- volatile unsigned short pip_ptpr; /* pip timing parameters reg */
- volatile unsigned long pip_pbdir; /* port b data direction reg */
- volatile unsigned long pip_pbpar; /* port b pin assignment reg */
- volatile unsigned long pip_pbodr; /* port b open drain reg */
- volatile unsigned long pip_pbdat; /* port b data reg */
- volatile unsigned char RESERVED71[0x18]; /* Reserved area */
- /* Serial Interface */
- volatile unsigned long si_simode; /* SI mode register */
- volatile unsigned char si_sigmr; /* SI global mode register */
- volatile unsigned char RESERVED55; /* Reserved area */
- volatile unsigned char si_sistr; /* SI status register */
- volatile unsigned char si_sicmr; /* SI command register */
- volatile unsigned char RESERVED56[0x4]; /* Reserved area */
- volatile unsigned long si_sicr; /* SI clock routing */
- volatile unsigned long si_sirp; /* SI ram pointers */
- volatile unsigned char RESERVED57[0xc]; /* Reserved area */
- volatile unsigned short si_siram[0x80]; /* SI routing ram */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */
+++ /dev/null
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit) x =bit
-
-/*****************************************************************
- Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET 0x8000
-#define CMD_OPCODE 0x0f00
-#define CMD_CHANNEL 0x00f0
-#define CMD_FLAG 0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS 0x0000
-#define INIT_RX_PARAMS 0x0100
-#define INIT_TX_PARAMS 0x0200
-#define ENTER_HUNT_MODE 0x0300
-#define STOP_TX 0x0400
-#define GR_STOP_TX 0x0500
-#define RESTART_TX 0x0600
-#define CLOSE_RX_BD 0x0700
-#define SET_ENET_GROUP 0x0800
-#define RESET_ENET_GROUP 0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32 0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV 0x01
-#define GUN 0x02
-#define GINT 0x04
-#define IQOV 0x08
-
-
-/* Timer commands */
-#define SET_TIMER 0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID 0x8000 /* Valid interrupt entry */
-#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */
-#define INTR_MASK_BITS 0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC 0x0
-#define MODE_APPLE_TALK 0x2
-#define MODE_SS7 0x3
-#define MODE_UART 0x4
-#define MODE_PROFIBUS 0x5
-#define MODE_ASYNC_HDLC 0x6
-#define MODE_V14 0x7
-#define MODE_BISYNC 0x8
-#define MODE_DDCMP 0x9
-#define MODE_MULTI_CHANNEL 0xa
-#define MODE_ETHERNET 0xc
-
-#define DIAG_NORMAL 0x0
-#define DIAG_LOCAL_LPB 0x1
-#define DIAG_AUTO_ECHO 0x2
-#define DIAG_LBP_ECHO 0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ 0x0
-#define ENC_NRZI 0x1
-#define ENC_FM0 0x2
-#define ENC_MANCH 0x4
-#define ENC_DIFF_MANC 0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1 0x0
-#define CLOCK_RATE_8 0x1
-#define CLOCK_RATE_16 0x2
-#define CLOCK_RATE_32 0x3
-
-#define TPP_00 0x0
-#define TPP_10 0x1
-#define TPP_01 0x2
-#define TPP_11 0x3
-
-#define TPL_NO 0x0
-#define TPL_8 0x1
-#define TPL_16 0x2
-#define TPL_32 0x3
-#define TPL_48 0x4
-#define TPL_64 0x5
-#define TPL_128 0x6
-
-#define TSNC_INFINITE 0x0
-#define TSNC_14_65 0x1
-#define TSNC_4_15 0x2
-#define TSNC_3_1 0x3
-
-#define EDGE_BOTH 0x0
-#define EDGE_POS 0x1
-#define EDGE_NEG 0x2
-#define EDGE_NO 0x3
-
-#define SYNL_NO 0x0
-#define SYNL_4 0x1
-#define SYNL_8 0x2
-#define SYNL_16 0x3
-
-#define TCRC_CCITT16 0x0
-#define TCRC_CRC16 0x1
-#define TCRC_CCITT32 0x2
-
-
-/*****************************************************************
- TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD 0x8000 /* Transmit on demand */
-
-
-/*****************************************************************
- CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-
-
-/*****************************************************************
- Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */
-#define INTR_SCC1 0x40000000 /* SCC port 1 */
-#define INTR_SCC2 0x20000000 /* SCC port 2 */
-#define INTR_SCC3 0x10000000 /* SCC port 3 */
-#define INTR_SCC4 0x08000000 /* SCC port 4 */
-#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */
-#define INTR_TIMER1 0x02000000 /* timer 1 */
-#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */
-#define INTR_DMA1 0x00200000 /* idma 1 */
-#define INTR_DMA2 0x00100000 /* idma 2 */
-#define INTR_TIMER2 0x00040000 /* timer 2 */
-#define INTR_CP_TIMER 0x00020000 /* CP timer */
-#define INTR_PIP_STATUS 0x00010000 /* PIP status */
-#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */
-#define INTR_TIMER3 0x00001000 /* timer 3 */
-#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */
-#define INTR_TIMER4 0x00000080 /* timer 4 */
-#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */
-#define INTR_SCP 0x00000020 /* SCP */
-#define INTR_SMC1 0x00000010 /* SMC 1 */
-#define INTR_SMC2 0x00000008 /* SMC 2 */
-#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */
-#define INTR_ERR 0x00000001 /* error */
-
-
-/*****************************************************************
- CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR 32
-#define CPMVEC_PIO_PC0 0x1f
-#define CPMVEC_SCC1 0x1e
-#define CPMVEC_SCC2 0x1d
-#define CPMVEC_SCC3 0x1c
-#define CPMVEC_SCC4 0x1b
-#define CPMVEC_PIO_PC1 0x1a
-#define CPMVEC_TIMER1 0x19
-#define CPMVEC_PIO_PC2 0x18
-#define CPMVEC_PIO_PC3 0x17
-#define CPMVEC_SDMA_CB_ERR 0x16
-#define CPMVEC_IDMA1 0x15
-#define CPMVEC_IDMA2 0x14
-#define CPMVEC_RESERVED3 0x13
-#define CPMVEC_TIMER2 0x12
-#define CPMVEC_RISCTIMER 0x11
-#define CPMVEC_RESERVED2 0x10
-#define CPMVEC_PIO_PC4 0x0f
-#define CPMVEC_PIO_PC5 0x0e
-#define CPMVEC_TIMER3 0x0c
-#define CPMVEC_PIO_PC6 0x0b
-#define CPMVEC_PIO_PC7 0x0a
-#define CPMVEC_PIO_PC8 0x09
-#define CPMVEC_RESERVED1 0x08
-#define CPMVEC_TIMER4 0x07
-#define CPMVEC_PIO_PC9 0x06
-#define CPMVEC_SPI 0x05
-#define CPMVEC_SMC1 0x04
-#define CPMVEC_SMC2 0x03
-#define CPMVEC_PIO_PC10 0x02
-#define CPMVEC_PIO_PC11 0x01
-#define CPMVEC_ERROR 0x00
-
-/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */
-/* #define CPMVEC_SCC1 ((ushort)0x1e) */
-/* #define CPMVEC_SCC2 ((ushort)0x1d) */
-/* #define CPMVEC_SCC3 ((ushort)0x1c) */
-/* #define CPMVEC_SCC4 ((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */
-/* #define CPMVEC_TIMER1 ((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
-/* #define CPMVEC_IDMA1 ((ushort)0x15) */
-/* #define CPMVEC_IDMA2 ((ushort)0x14) */
-/* #define CPMVEC_RESERVED3 ((ushort)0x13) */
-/* #define CPMVEC_TIMER2 ((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
-/* #define CPMVEC_RESERVED2 ((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */
-/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */
-/* #define CPMVEC_RESERVED1 ((ushort)0x08) */
-/* #define CPMVEC_TIMER4 ((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */
-/* #define CPMVEC_SPI ((ushort)0x05) */
-/* #define CPMVEC_SMC1 ((ushort)0x04) */
-/* #define CPMVEC_SMC2 ((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */
-/* #define CPMVEC_ERROR ((ushort)0x00) */
-
-
-/*****************************************************************
- * PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- *
- * Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1 ((ushort)0x0001)
-#define PA_TXD1 ((ushort)0x0002)
-#define PA_RXD2 ((ushort)0x0004)
-#define PA_TXD2 ((ushort)0x0008)
-#define PA_RXD3 ((ushort)0x0010)
-#define PA_TXD3 ((ushort)0x0020)
-#define PA_RXD4 ((ushort)0x0040)
-#define PA_TXD4 ((ushort)0x0080)
-
-#define PA_CLK1 ((ushort)0x0100)
-#define PA_CLK2 ((ushort)0x0200)
-#define PA_CLK3 ((ushort)0x0400)
-#define PA_CLK4 ((ushort)0x0800)
-#define PA_CLK5 ((ushort)0x1000)
-#define PA_CLK6 ((ushort)0x2000)
-#define PA_CLK7 ((ushort)0x4000)
-#define PA_CLK8 ((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1 ((ushort)0x0001)
-#define PC_RTS2 ((ushort)0x0002)
-#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1 ((ushort)0x0010)
-#define PC_CD1 ((ushort)0x0020)
-#define PC_CTS2 ((ushort)0x0040)
-#define PC_CD2 ((ushort)0x0080)
-#define PC_CTS3 ((ushort)0x0100)
-#define PC_CD3 ((ushort)0x0200)
-#define PC_CTS4 ((ushort)0x0400)
-#define PC_CD4 ((ushort)0x0800)
-
-
-
-/*****************************************************************
- chip select option register
-*****************************************************************/
-#define DTACK 0xe000
-#define ADR_MASK 0x1ffc
-#define RDWR_MASK 0x0002
-#define FC_MASK 0x0001
-
-/*****************************************************************
- tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
- ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
- ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) { \
- if((bd)->status & T_W) \
- (bd) = TBD_ADDR(quicc,pram); \
- else \
- (bd)++; \
-}
-#define DECREASE_TBD(bd,quicc,pram) { \
- if ((bd) == TBD_ADDR(quicc, pram)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-#define INCREASE_RBD(bd,quicc,pram) { \
- if((bd)->status & R_W) \
- (bd) = RBD_ADDR(quicc,pram); \
- else \
- (bd)++; \
-}
-#define DECREASE_RBD(bd,quicc,pram) { \
- if ((bd) == RBD_ADDR(quicc, pram)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-
-/*****************************************************************
- Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
- (&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
- CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
- ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
- CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
- ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) { \
- if((bd)->status & T_W) \
- (bd) = TBD_32_ADDR(quicc,page,channel); \
- else \
- (bd)++; \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) { \
- if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) { \
- if((bd)->status & R_W) \
- (bd) = RBD_32_ADDR(quicc,page,channel); \
- else \
- (bd)++; \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) { \
- if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_MACHDEP_H
-#define _M68KNOMMU_MACHDEP_H
-
-#include <linux/interrupt.h>
-
-/* Hardware clock functions */
-extern void hw_timer_init(void);
-extern unsigned long hw_timer_offset(void);
-
-extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
-
-/* Machine dependent time handling */
-extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
- int *min, int *sec);
-extern int (*mach_set_clock_mmss)(unsigned long);
-
-/* machine dependent power off functions */
-extern void (*mach_reset)( void );
-extern void (*mach_halt)( void );
-extern void (*mach_power_off)( void );
-
-extern void config_BSP(char *command, int len);
-
-extern void do_IRQ(int irq, struct pt_regs *fp);
-
-#endif /* _M68KNOMMU_MACHDEP_H */
+++ /dev/null
-#include <asm-m68k/math-emu.h>
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _M68KNOMMU_MC146818RTC_H
-#define _M68KNOMMU_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _M68KNOMMU_MC146818RTC_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfcache.h -- ColdFire CPU cache support code
- *
- * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef __M68KNOMMU_MCFCACHE_H
-#define __M68KNOMMU_MCFCACHE_H
-/****************************************************************************/
-
-
-/*
- * The different ColdFire families have different cache arrangments.
- * Everything from a small instruction only cache, to configurable
- * data and/or instruction cache, to unified instruction/data, to
- * harvard style separate instruction and data caches.
- */
-
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-/*
- * Simple version 2 core cache. These have instruction cache only,
- * we just need to invalidate it and enable it.
- */
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate cache cmd */
- movec %d0,%CACR /* do invalidate cache */
- movel #0x80000100,%d0 /* setup cache mask */
- movec %d0,%CACR /* enable cache */
-.endm
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-/*
- * New version 2 cores have a configurable split cache arrangement.
- * For now I am just enabling instruction cache - but ultimately I
- * think a split instruction/data cache would be better.
- */
-.macro CACHE_ENABLE
- movel #0x01400000,%d0
- movec %d0,%CACR /* invalidate cache */
- nop
- movel #0x0000c000,%d0 /* set SDRAM cached only */
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0x80400100,%d0 /* configure cache */
- movec %d0,%CACR /* enable cache */
- nop
-.endm
-#endif /* CONFIG_M523x || CONFIG_M527x */
-
-#if defined(CONFIG_M528x)
-.macro CACHE_ENABLE
- nop
- movel #0x01000000, %d0
- movec %d0, %CACR /* Invalidate cache */
- nop
- movel #0x0000c020, %d0 /* Set SDRAM cached only */
- movec %d0, %ACR0
- movel #0x00000000, %d0 /* No other regions cached */
- movec %d0, %ACR1
- movel #0x80000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-.endm
-#endif /* CONFIG_M528x */
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
-/*
- * The version 3 core cache. Oddly enough the version 2 core 5249
- * has the same SDRAM and cache setup as the version 3 cores.
- * This is a single unified instruction/data cache.
- */
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
-#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
- movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
-#else
- movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
-#endif
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0xa0000200,%d0 /* enable cache */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M5249 || CONFIG_M5307 */
-
-#if defined(CONFIG_M532x)
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate cache cmd */
- movec %d0,%CACR /* do invalidate cache */
- nop
- movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0x80000200,%d0 /* setup cache mask */
- movec %d0,%CACR /* enable cache */
- nop
-.endm
-#endif /* CONFIG_M532x */
-
-#if defined(CONFIG_M5407)
-/*
- * Version 4 cores have a true harvard style separate instruction
- * and data cache. Invalidate and enable cache, also enable write
- * buffers and branch accelerator.
- */
-.macro CACHE_ENABLE
- movel #0x01040100,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- movel #0x000fc000,%d0 /* set SDRAM cached only */
- movec %d0, %ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0, %ACR1
- movel #0x000fc000,%d0 /* set SDRAM cached only */
- movec %d0, %ACR2
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0, %ACR3
- movel #0xb6088400,%d0 /* enable caches */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M5407 */
-
-#if defined(CONFIG_M520x)
-.macro CACHE_ENABLE
- move.l #0x01000000,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
- movec %d0,%ACR0
- move.l #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- move.l #0x80400000,%d0 /* enable 8K instruction cache */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M520x */
-
-/****************************************************************************/
-#endif /* __M68KNOMMU_MCFCACHE_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfdma.h -- Coldfire internal DMA support defines.
- *
- * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
- */
-
-/****************************************************************************/
-#ifndef mcfdma_h
-#define mcfdma_h
-/****************************************************************************/
-
-
-/*
- * Get address specific defines for this Coldfire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */
-#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */
-#elif defined(CONFIG_M5272)
-#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-/* These are relative to the IPSBAR, not MBAR */
-#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */
-#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */
-#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */
-#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */
-#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */
-#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */
-#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */
-#endif
-
-
-#if !defined(CONFIG_M5272)
-
-/*
- * Define the DMA register set addresses.
- * Note: these are longword registers, use unsigned long as data type
- */
-#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */
-#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */
-/* these are word registers, use unsigned short data type */
-#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */
-#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */
-/* these are byte registers, use unsiged char data type */
-#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */
-#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */
-
-/*
- * Bit definitions for the DMA Control Register (DCR).
- */
-#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */
-#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */
-#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */
-#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */
-#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */
-#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */
-#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */
-#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */
-#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */
-#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */
-#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */
-#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */
-#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */
-#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */
-#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */
-#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */
-#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */
-#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */
-#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */
-#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */
-#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */
-#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */
-#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */
-#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */
-#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */
-#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */
-#define MCFDMA_DCR_START 0x0001 /* Start transfer */
-
-/*
- * Bit definitions for the DMA Status Register (DSR).
- */
-#define MCFDMA_DSR_CE 0x40 /* Config error */
-#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */
-#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */
-#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */
-#define MCFDMA_DSR_BSY 0x02 /* Busy */
-#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */
-
-#else /* This is an MCF5272 */
-
-#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */
-#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */
-#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */
-#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */
-#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */
-
-/* Bit definitions for the DMA Mode Register (DMR) */
-#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */
-#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */
-#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */
-#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */
-#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */
-#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */
-#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */
-#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */
-#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */
-#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */
-#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */
-#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */
-#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
-#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
-#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
-#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
-#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */
-#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */
-#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */
-#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */
-#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */
-#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */
-#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */
-#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */
-#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
-#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
-#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
-#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
-
-/* Bit definitions for the DMA interrupt register (DIR) */
-#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */
-#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */
-#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */
-#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
-#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */
-#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */
-#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */
-#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */
-
-#endif /* !defined(CONFIG_M5272) */
-
-/****************************************************************************/
-#endif /* mcfdma_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfmbus.h -- Coldfire MBUS support defines.
- *
- * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE 0x280
-#define MCFMBUS_IRQ_VECTOR 0x19
-#define MCFMBUS_IRQ 0x1
-#define MCFMBUS_CLK 0x3f
-#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
-#define MCFMBUS_ADDRESS 0x01
-
-
-/*
-* Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR 0x00
-#define MCFMBUS_MFDR 0x04
-#define MCFMBUS_MBCR 0x08
-#define MCFMBUS_MBSR 0x0C
-#define MCFMBUS_MBDR 0x10
-
-
-#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
-
-/*
-* Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
-#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
-#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
-#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
-
-/*
-* Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
-#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
-#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
-#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
-#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
-#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
-#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
-
-/*
-* Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK 1
-#define MBUSIOCGCLOCK 2
-#define MBUSIOCSADDR 3
-#define MBUSIOCGADDR 4
-#define MBUSIOCSSLADDR 5
-#define MBUSIOCGSLADDR 6
-#define MBUSIOCSSUBADDR 7
-#define MBUSIOCGSUBADDR 8
-
-#endif
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfne.h -- NE2000 in ColdFire eval boards.
- *
- * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo (www.lineo.com)
- * (C) Copyright 2001, SnapGear (www.snapgear.com)
- *
- * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
- *
- * Hacked support for m5206e Cadre III evaluation board
- * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef mcfne_h
-#define mcfne_h
-/****************************************************************************/
-
-
-/*
- * Support for NE2000 clones devices in ColdFire based boards.
- * Not all boards address these parts the same way, some use a
- * direct addressing method, others use a side-band address space
- * to access odd address registers, some require byte swapping
- * others do not.
- */
-#define BSWAP(w) (((w) << 8) | ((w) >> 8))
-#define RSWAP(w) (w)
-
-
-/*
- * Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0xf0
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 4
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1c
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 4
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR 0x30000300
-#define NE2000_IRQ_VECTOR 25
-#define NE2000_IRQ_PRIORITY 1
-#define NE2000_IRQ_LEVEL 3
-#define NE2000_BYTE volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR 0x30600300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR 67
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0 0x30600300
-#define NE2000_ADDR1 0x30800300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR0 27
-#define NE2000_IRQ_VECTOR1 29
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR 0x30600300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR 27
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR 0xfe600300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 3
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- * Side-band address space for odd address requires re-mapping
- * many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define outb ne2000_outb
-#define inb ne2000_inb
-#define outb_p ne2000_outb
-#define inb_p ne2000_inb
-#define outsb ne2000_outsb
-#define outsw ne2000_outsw
-#define insb ne2000_insb
-#define insw ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- * This macro converts a conventional register address into the
- * real memory pointer of the mapped NE2000 device.
- * On most NE2000 implementations on ColdFire boards the chip is
- * mapped in kinda funny, due to its ISA heritage.
- */
-#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define NE2000_DATA_PTR(addr) (addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
- NE2000_BYTE *rp;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- *rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
- NE2000_BYTE *rp, val;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- val = *rp;
- return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *rp;
- *buf++ = RSWAP(val);
- }
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *rp;
- *buf++ = BSWAP(w);
- }
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *buf++;
- *rp = RSWAP(val);
- }
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *buf++;
- *rp = BSWAP(w);
- }
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- * Lastly the interrupt set up code...
- * Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
- *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
- *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
- mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned long *icrp;
- volatile unsigned long *pitr;
-
- /* The NE2000 device uses external IRQ3 */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77077777) | 0x00d00000;
-
- pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
- *pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
- volatile unsigned long *icrp;
-
- /* The NE2000 device uses external IRQ3 */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
- mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
-#endif /* mcfne_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfpci.h -- PCI bridge on ColdFire eval boards.
- *
- * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfpci_h
-#define mcfpci_h
-/****************************************************************************/
-
-
-#ifdef CONFIG_PCI
-
-/*
- * Address regions in the PCI address space are not mapped into the
- * normal memory space of the ColdFire. They must be accessed via
- * handler routines. This is easy for I/O space (inb/outb/etc) but
- * needs some code changes to support ordinary memory. Interrupts
- * also need to be vectored through the PCI handler first, then it
- * will call the actual driver sub-handlers.
- */
-
-/*
- * Un-define all the standard I/O access routines.
- */
-#undef inb
-#undef inw
-#undef inl
-#undef inb_p
-#undef inw_p
-#undef insb
-#undef insw
-#undef insl
-#undef outb
-#undef outw
-#undef outl
-#undef outb_p
-#undef outw_p
-#undef outsb
-#undef outsw
-#undef outsl
-
-#undef request_irq
-#undef free_irq
-
-#undef bus_to_virt
-#undef virt_to_bus
-
-
-/*
- * Re-direct all I/O memory accesses functions to PCI specific ones.
- */
-#define inb pci_inb
-#define inw pci_inw
-#define inl pci_inl
-#define inb_p pci_inb
-#define inw_p pci_inw
-#define insb pci_insb
-#define insw pci_insw
-#define insl pci_insl
-
-#define outb pci_outb
-#define outw pci_outw
-#define outl pci_outl
-#define outb_p pci_outb
-#define outw_p pci_outw
-#define outsb pci_outsb
-#define outsw pci_outsw
-#define outsl pci_outsl
-
-#define request_irq pci_request_irq
-#define free_irq pci_free_irq
-
-#define virt_to_bus pci_virt_to_bus
-#define bus_to_virt pci_bus_to_virt
-
-#define CONFIG_COMEMPCI 1
-
-
-/*
- * Prototypes of the real PCI functions (defined in bios32.c).
- */
-unsigned char pci_inb(unsigned int addr);
-unsigned short pci_inw(unsigned int addr);
-unsigned int pci_inl(unsigned int addr);
-void pci_insb(void *addr, void *buf, int len);
-void pci_insw(void *addr, void *buf, int len);
-void pci_insl(void *addr, void *buf, int len);
-
-void pci_outb(unsigned char val, unsigned int addr);
-void pci_outw(unsigned short val, unsigned int addr);
-void pci_outl(unsigned int val, unsigned int addr);
-void pci_outsb(void *addr, void *buf, int len);
-void pci_outsw(void *addr, void *buf, int len);
-void pci_outsl(void *addr, void *buf, int len);
-
-int pci_request_irq(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long flags,
- const char *device,
- void *dev_id);
-void pci_free_irq(unsigned int irq, void *dev_id);
-
-void *pci_bmalloc(int size);
-void pci_bmfree(void *bmp, int len);
-void pci_copytoshmem(unsigned long bmp, void *src, int size);
-void pci_copyfromshmem(void *dst, unsigned long bmp, int size);
-unsigned long pci_virt_to_bus(volatile void *address);
-void *pci_bus_to_virt(unsigned long address);
-void pci_bmcpyto(void *dst, void *src, int len);
-void pci_bmcpyfrom(void *dst, void *src, int len);
-
-#endif /* CONFIG_PCI */
-/****************************************************************************/
-#endif /* mcfpci_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfpit.h -- ColdFire internal PIT timer support defines.
- *
- * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef mcfpit_h
-#define mcfpit_h
-/****************************************************************************/
-
-
-/*
- * Get address specific defines for the 5270/5271, 5280/5282, and 5208.
- */
-#if defined(CONFIG_M520x)
-#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */
-#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */
-#else
-#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */
-#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */
-#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */
-#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */
-#endif
-
-/*
- * Define the PIT timer register set addresses.
- */
-#define MCFPIT_PCSR 0x0 /* PIT control register */
-#define MCFPIT_PMR 0x2 /* PIT modulus register */
-#define MCFPIT_PCNTR 0x4 /* PIT count register */
-
-/*
- * Bit definitions for the PIT Control and Status register.
- */
-#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
-#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
-#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
-#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
-#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
-#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
-#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
-#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */
-#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */
-#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */
-#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */
-#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */
-#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */
-#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */
-#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */
-#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */
-#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */
-#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */
-#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */
-
-/****************************************************************************/
-#endif /* mcfpit_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfsim.h -- ColdFire System Integration Module support.
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfsim_h
-#define mcfsim_h
-/****************************************************************************/
-
-
-/*
- * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- * 5307 or 5407 specific addresses.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#include <asm/m5206sim.h>
-#elif defined(CONFIG_M520x)
-#include <asm/m520xsim.h>
-#elif defined(CONFIG_M523x)
-#include <asm/m523xsim.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#elif defined(CONFIG_M527x)
-#include <asm/m527xsim.h>
-#elif defined(CONFIG_M5272)
-#include <asm/m5272sim.h>
-#elif defined(CONFIG_M528x)
-#include <asm/m528xsim.h>
-#elif defined(CONFIG_M5307)
-#include <asm/m5307sim.h>
-#elif defined(CONFIG_M532x)
-#include <asm/m532xsim.h>
-#elif defined(CONFIG_M5407)
-#include <asm/m5407sim.h>
-#endif
-
-
-/*
- * Define the base address of the SIM within the MBAR address space.
- */
-#define MCFSIM_BASE 0x0 /* Base address of SIM */
-
-
-/*
- * Bit definitions for the ICR family of registers.
- */
-#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
-#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
-#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
-#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
-#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
-#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
-#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
-#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
-#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
-
-#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
-#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
-#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
-#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
-
-/*
- * Bit definitions for the Interrupt Mask register (IMR).
- */
-#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
-#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
-#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
-#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
-#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
-#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
-#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
-
-#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
-#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
-#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
-#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
-#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
-#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
-#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
-#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
-#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
-#endif
-
-/*
- * Mask for all of the SIM devices. Some parts have more or less
- * SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
-#endif
-
-
-/*
- * PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef ICR_INTRCONF
-#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
-#endif
-#ifndef MCFPIT_IMR
-#define MCFPIT_IMR MCFINTC_IMRH
-#endif
-#ifndef MCFPIT_IMR_IBIT
-#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- * Definition for the interrupt auto-vectoring support.
- */
-extern void mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
-/****************************************************************************/
-#endif /* mcfsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfsmc_h
-#define mcfsmc_h
-/****************************************************************************/
-
-/*
- * None of the current ColdFire targets that use the SMC91x111
- * allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef outb
-#undef inb
-#undef outw
-#undef outwd
-#undef inw
-#undef outl
-#undef inl
-
-#undef outsb
-#undef outsw
-#undef outsl
-#undef insb
-#undef insw
-#undef insl
-
-/*
- * Re-defines for ColdFire environment... The SMC part is
- * mapped into memory space, so remap the PC-style in/out
- * routines to handle that.
- */
-#define outb smc_outb
-#define inb smc_inb
-#define outw smc_outw
-#define outwd smc_outwd
-#define inw smc_inw
-#define outl smc_outl
-#define inl smc_inl
-
-#define outsb smc_outsb
-#define outsw smc_outsw
-#define outsl smc_outsl
-#define insb smc_insb
-#define insw smc_insw
-#define insl smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
- register unsigned short w;
- w = *((volatile unsigned short *) (addr & ~0x1));
- return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
- *((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
- register unsigned short w;
- w = *((volatile unsigned short *) addr);
- return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
- *((volatile unsigned long *) addr) =
- ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
- ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
- *((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- * The rep* functions are used to feed the data port with
- * raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
-
- /* Copy as words for as long as possible */
- for (ebuf = buf + (len >> 1); (buf < ebuf); )
- *buf++ = *rp;
-
- /* Lastly, handle left over byte */
- if (len & 0x1)
- *((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned long *rp;
- unsigned long *buf, *ebuf;
-
- buf = (unsigned long *) vbuf;
- rp = (volatile unsigned long *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned long *rp;
- unsigned long *buf, *ebuf;
-
- buf = (unsigned long *) vbuf;
- rp = (volatile unsigned long *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- * Re-map the address space of at least one of the SMC ethernet
- * parts. Both parts power up decoding the same address, so we
- * need to move one of them first, before doing enything else.
- *
- * We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
- static int once = 0;
- extern unsigned short ppdata;
- if (once++ == 0) {
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
- ppdata |= 0x0080;
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
- outw(0x0001, ioaddr + BANK_SELECT);
- outw(0x0001, ioaddr + BANK_SELECT);
- outw(0x0067, ioaddr + BASE);
-
- ppdata &= ~0x0080;
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
- }
-
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif /* mcfsmc_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcftimer.h -- ColdFire internal TIMER support defines.
- *
- * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcftimer_h
-#define mcftimer_h
-/****************************************************************************/
-
-
-/*
- * Get address specific defines for this ColdFire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
-#elif defined(CONFIG_M5272)
-#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
-#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
-#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
-#elif defined(CONFIG_M532x)
-#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */
-#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */
-#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */
-#endif
-
-
-/*
- * Define the TIMER register set addresses.
- */
-#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
-#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */
-#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */
-#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
-#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */
-#else
-#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
-#endif
-
-/*
- * Bit definitions for the Timer Mode Register (TMR).
- * Register bit flags are common accross ColdFires.
- */
-#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
-#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
-#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
-#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
-#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
-#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
-#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
-#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
-#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
-#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
-#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
-#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
-#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
-#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
-#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
-#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
-#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
-
-/*
- * Bit definitions for the Timer Event Registers (TER).
- */
-#define MCFTIMER_TER_CAP 0x01 /* Capture event */
-#define MCFTIMER_TER_REF 0x02 /* Refernece event */
-
-/****************************************************************************/
-#endif /* mcftimer_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfuart.h -- ColdFire internal UART support defines.
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfuart_h
-#define mcfuart_h
-/****************************************************************************/
-
-/*
- * Define the base address of the UARTS within the MBAR address
- * space.
- */
-#if defined(CONFIG_M5272)
-#define MCFUART_BASE1 0x100 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define MCFUART_BASE1 0x180 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x140 /* Base address of UART1 */
-#define MCFUART_BASE2 0x180 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x240 /* Base address of UART2 */
-#define MCFUART_BASE3 0x280 /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
-#define MCFUART_BASE2 0x200 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
-#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
-#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
-#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
-#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
-#endif
-
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-struct mcf_platform_uart {
- unsigned long mapbase; /* Physical address base */
- void __iomem *membase; /* Virtual address if mapped */
- unsigned int irq; /* Interrupt vector */
- unsigned int uartclk; /* UART clock rate */
-};
-
-/*
- * Define the ColdFire UART register set addresses.
- */
-#define MCFUART_UMR 0x00 /* Mode register (r/w) */
-#define MCFUART_USR 0x04 /* Status register (r) */
-#define MCFUART_UCSR 0x04 /* Clock Select (w) */
-#define MCFUART_UCR 0x08 /* Command register (w) */
-#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
-#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
-#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
-#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
-#define MCFUART_UISR 0x14 /* Interrupt Status (r) */
-#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
-#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
-#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
-#ifdef CONFIG_M5272
-#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
-#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
-#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
-#else
-#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
-#endif
-#define MCFUART_UIPR 0x34 /* Input Port (r) */
-#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
-#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
-
-
-/*
- * Define bit flags in Mode Register 1 (MR1).
- */
-#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
-#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
-#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
-#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
-#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
-
-#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
-#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
-#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
-#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
-#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
-
-#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
-#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
-#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
-#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
-
-/*
- * Define bit flags in Mode Register 2 (MR2).
- */
-#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
-#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
-#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
-#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
-#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
-
-#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
-#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
-#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
-
-/*
- * Define bit flags in Status Register (USR).
- */
-#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
-#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
-#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
-#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
-#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
-#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
-#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
-#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
-
-#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
- MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-
-/*
- * Define bit flags in Clock Select Register (UCSR).
- */
-#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
-#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
-#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
-
-#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
-#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
-#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
-
-/*
- * Define bit flags in Command Register (UCR).
- */
-#define MCFUART_UCR_CMDNULL 0x00 /* No command */
-#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */
-#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */
-#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */
-#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */
-#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */
-#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
-#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
-
-#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
-#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
-#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
-#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
-#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
-#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
-
-/*
- * Define bit flags in Input Port Change Register (UIPCR).
- */
-#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
-#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
-
-/*
- * Define bit flags in Input Port Register (UIP).
- */
-#define MCFUART_UIPR_CTS 0x01 /* CTS value */
-
-/*
- * Define bit flags in Output Port Registers (UOP).
- * Clear bit by writing to UOP0, set by writing to UOP1.
- */
-#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
-
-/*
- * Define bit flags in the Auxiliary Control Register (UACR).
- */
-#define MCFUART_UACR_IEC 0x01 /* Input enable control */
-
-/*
- * Define bit flags in Interrupt Status Register (UISR).
- * These same bits are used for the Interrupt Mask Register (UIMR).
- */
-#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
-#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
-#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
-#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
-
-#ifdef CONFIG_M5272
-/*
- * Define bit flags in the Transmitter FIFO Register (UTF).
- */
-#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */
-#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */
-#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */
-
-/*
- * Define bit flags in the Receiver FIFO Register (URF).
- */
-#define MCFUART_URF_RXB 0x1f /* Receiver data level */
-#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */
-#define MCFUART_URF_RXS 0xc0 /* Receiver status */
-#endif
-
-/****************************************************************************/
-#endif /* mcfuart_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfdebug.h -- ColdFire Debug Module support.
- *
- * (C) Copyright 2001, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfdebug_h
-#define mcfdebug_h
-/****************************************************************************/
-
-/* Define the debug module registers */
-#define MCFDEBUG_CSR 0x0 /* Configuration status */
-#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */
-#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */
-#define MCFDEBUG_TDR 0x7 /* Trigger definition */
-#define MCFDEBUG_PBR 0x8 /* PC breakpoint */
-#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */
-#define MCFDEBUG_ABHR 0xc /* High address breakpoint */
-#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */
-#define MCFDEBUG_DBR 0xe /* Data breakpoint */
-#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */
-
-/* Define some handy constants for the trigger definition register */
-#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */
-#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */
-#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */
-#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */
-#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */
-#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */
-#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */
-#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */
-#define MCFDEBUG_TDR_EDLW2 0x10000000
-#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */
-#define MCFDEBUG_TDR_EDWL2 0x08000000
-#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */
-#define MCFDEBUG_TDR_EDWU2 0x04000000
-#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */
-#define MCFDEBUG_TDR_EDLL2 0x02000000
-#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */
-#define MCFDEBUG_TDR_EDLM2 0x01000000
-#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */
-#define MCFDEBUG_TDR_EDUM2 0x00800000
-#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */
-#define MCFDEBUG_TDR_EDUU2 0x00400000
-#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */
-#define MCFDEBUG_TDR_DI2 0x00200000
-#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */
-#define MCFDEBUG_TDR_EAI2 0x00100000
-#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */
-#define MCFDEBUG_TDR_EAR2 0x00080000
-#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */
-#define MCFDEBUG_TDR_EAL2 0x00040000
-#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */
-#define MCFDEBUG_TDR_EPC2 0x00020000
-#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */
-#define MCFDEBUG_TDR_PCI2 0x00010000
-
-/* Constants for the address attribute trigger register */
-#define MCFDEBUG_AAR_RESET 0x00000005
-/* Fields not yet implemented */
-
-/* And some definitions for the writable sections of the CSR */
-#define MCFDEBUG_CSR_RESET 0x00100000
-#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */
-#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */
-#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */
-#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */
-#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */
-#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */
-#define MCFDEBUG_CSR_DDC_WRITE 0x00001000
-#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */
-#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */
-#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */
-#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */
-#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */
-#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */
-#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */
-
-/* Constants for the BDM address attribute register */
-#define MCFDEBUG_BAAR_RESET 0x00000005
-/* Fields not yet implemented */
-
-
-/* This routine wrappers up the wdebug asm instruction so that the register
- * and value can be relatively easily specified. The biggest hassle here is
- * that the debug module instructions (2 longs) must be long word aligned and
- * some pointer fiddling is performed to ensure this.
- */
-static inline void wdebug(int reg, unsigned long data) {
- unsigned short dbg_spc[6];
- unsigned short *dbg;
-
- // Force alignment to long word boundary
- dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
-
- // Build up the debug instruction
- dbg[0] = 0x2c80 | (reg & 0xf);
- dbg[1] = (data >> 16) & 0xffff;
- dbg[2] = data & 0xffff;
- dbg[3] = 0;
-
- // Perform the wdebug instruction
-#if 0
- // This strain is for gas which doesn't have the wdebug instructions defined
- asm( "move.l %0, %%a0\n\t"
- ".word 0xfbd0\n\t"
- ".word 0x0003\n\t"
- :: "g" (dbg) : "a0");
-#else
- // And this is for when it does
- asm( "wdebug (%0)" :: "a" (dbg));
-#endif
-}
-
-#endif
+++ /dev/null
-#include <asm-m68k/md.h>
+++ /dev/null
-#include <asm-m68k/mman.h>
+++ /dev/null
-#ifndef __M68KNOMMU_MMU_H
-#define __M68KNOMMU_MMU_H
-
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
-typedef struct {
- unsigned long end_brk;
-} mm_context_t;
-
-#endif /* __M68KNOMMU_MMU_H */
+++ /dev/null
-#ifndef __M68KNOMMU_MMU_CONTEXT_H
-#define __M68KNOMMU_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- // mm->context = virt_to_phys(mm->pgd);
- return(0);
-}
-
-#define destroy_context(mm) do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
-}
-
-#endif
+++ /dev/null
-#ifndef ASM_M68KNOMMU_MODULE_H
-#define ASM_M68KNOMMU_MODULE_H
-
-struct mod_arch_specific {
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif /* ASM_M68KNOMMU_MODULE_H */
+++ /dev/null
-#include <asm-m68k/movs.h>
+++ /dev/null
-#include <asm-m68k/msgbuf.h>
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-/****************************************************************************/
-
-/*
- * nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
- *
- * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
- * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com)
- * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef nettel_h
-#define nettel_h
-/****************************************************************************/
-
-
-/****************************************************************************/
-#ifdef CONFIG_NETtel
-/****************************************************************************/
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#endif
-
-/*---------------------------------------------------------------------------*/
-#if defined(CONFIG_M5307)
-/*
- * NETtel/5307 based hardware first. DTR/DCD lines are wired to
- * GPIO lines. Most of the LED's are driver through a latch
- * connected to CS2.
- */
-#define MCFPP_DCD1 0x0001
-#define MCFPP_DCD0 0x0002
-#define MCFPP_DTR1 0x0004
-#define MCFPP_DTR0 0x0008
-
-#define NETtel_LEDADDR 0x30400000
-
-#ifndef __ASSEMBLY__
-
-extern volatile unsigned short ppdata;
-
-/*
- * These functions defined to give quasi generic access to the
- * PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
- return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
- ppdata = (ppdata & ~mask) | bits;
- *pp = ppdata;
-}
-#endif
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5206e)
-/*
- * NETtel/5206e based hardware has leds on latch on CS3.
- * No support modem for lines??
- */
-#define NETtel_LEDADDR 0x50000000
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5272)
-/*
- * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
- */
-#define MCFPP_DCD0 0x0080
-#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */
-#define MCFPP_DTR0 0x0040
-#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */
-
-#ifndef __ASSEMBLY__
-/*
- * These functions defined to give quasi generic access to the
- * PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
- return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
- *pp = (*pp & ~mask) | bits;
-}
-#endif
-
-#endif
-/*---------------------------------------------------------------------------*/
-
-/****************************************************************************/
-#endif /* CONFIG_NETtel */
-/****************************************************************************/
-#endif /* nettel_h */
+++ /dev/null
-#include <asm-m68k/openprom.h>
+++ /dev/null
-#include <asm-m68k/oplib.h>
+++ /dev/null
-#ifndef _M68KNOMMU_PAGE_H
-#define _M68KNOMMU_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT (12)
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
- alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr) virt_to_phys((void *)(vaddr))
-#define __va(paddr) phys_to_virt((unsigned long)(paddr))
-
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-
-#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
- ((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/page.h>
-
-#endif /* _M68KNOMMU_PAGE_H */
+++ /dev/null
-
-
-/* This handles the memory map.. */
-#define PAGE_OFFSET_RAW CONFIG_RAMBASE
-
+++ /dev/null
-#ifndef _M68KNOMMU_PARAM_H
-#define _M68KNOMMU_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-#define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _M68KNOMMU_PARAM_H */
+++ /dev/null
-#ifndef M68KNOMMU_PCI_H
-#define M68KNOMMU_PCI_H
-
-#include <asm-m68k/pci.h>
-
-#ifdef CONFIG_COMEMPCI
-/*
- * These are pretty much arbitary with the CoMEM implementation.
- * We have the whole address space to ourselves.
- */
-#define PCIBIOS_MIN_IO 0x100
-#define PCIBIOS_MIN_MEM 0x00010000
-
-#define pcibios_scan_all_fns(a, b) 0
-
-/*
- * Return whether the given PCI device DMA address mask can
- * be supported properly. For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
- return 1;
-}
-
-#endif /* CONFIG_COMEMPCI */
-
-#endif /* M68KNOMMU_PCI_H */
+++ /dev/null
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
+++ /dev/null
-#ifndef _M68KNOMMU_PGALLOC_H
-#define _M68KNOMMU_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _M68KNOMMU_PGALLOC_H */
+++ /dev/null
-#ifndef _M68KNOMMU_PGTABLE_H
-#define _M68KNOMMU_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-/*
- * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd) (1)
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-#define pmd_offset(a, b) ((void *)0)
-
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_KERNEL __pgprot(0)
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init() do { } while (0)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _M68KNOMMU_PGTABLE_H */
+++ /dev/null
-#include <asm-m68k/poll.h>
+++ /dev/null
-#include <asm-m68k/posix_types.h>
+++ /dev/null
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
- extern unsigned int sw_usp;
- return(sw_usp);
-#else
- unsigned long usp;
- __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
- return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
- extern unsigned int sw_usp;
- sw_usp = usp;
-#else
- __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE (0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE 0
-
-/*
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned short sr; /* saved status register */
- unsigned short fs; /* saved fs (sfc, dfc) */
- unsigned long crp[2]; /* cpu root pointer */
- unsigned long esp0; /* points to SR of stack frame */
- unsigned long fp[8*3];
- unsigned long fpcntl[3]; /* fp control regs */
- unsigned char fpstate[FPSTATESIZE]; /* floating point state */
-};
-
-#define INIT_THREAD { \
- sizeof(init_stack) + (unsigned long) init_stack, 0, \
- PS_S, __KERNEL_DS, \
- {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
-#else
-#define reformat(_regs) do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp) \
-do { \
- set_fs(USER_DS); /* reads from user space */ \
- (_regs)->pc = (_pc); \
- ((struct switch_stack *)(_regs))[-1].a6 = 0; \
- reformat(_regs); \
- if (current->mm) \
- (_regs)->d5 = current->mm->start_data; \
- (_regs)->sr &= ~0x2000; \
- wrusp(_usp); \
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- (virt_addr_valid((tsk)->thread.esp0))) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#endif
+++ /dev/null
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1 0
-#define PT_D2 1
-#define PT_D3 2
-#define PT_D4 3
-#define PT_D5 4
-#define PT_D6 5
-#define PT_D7 6
-#define PT_A0 7
-#define PT_A1 8
-#define PT_A2 9
-#define PT_A3 10
-#define PT_A4 11
-#define PT_A5 12
-#define PT_A6 13
-#define PT_D0 14
-#define PT_USP 15
-#define PT_ORIG_D0 16
-#define PT_SR 17
-#define PT_PC 18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long d1;
- long d2;
- long d3;
- long d4;
- long d5;
- long a0;
- long a1;
- long a2;
- long d0;
- long orig_d0;
- long stkadj;
-#ifdef CONFIG_COLDFIRE
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
- unsigned short sr;
- unsigned long pc;
-#else
- unsigned short sr;
- unsigned long pc;
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long d6;
- unsigned long d7;
- unsigned long a3;
- unsigned long a4;
- unsigned long a5;
- unsigned long a6;
- unsigned long retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
+++ /dev/null
-/***********************************
- * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
- ***********************************
- *
- ***************************************
- * Simple drivers common header
- ***************************************
- */
-
-#ifndef __SIMPLE_H
-#define __SIMPLE_H
-
-/* #include "quicc.h" */
-
-#define GLB_SCC_0 0
-#define GLB_SCC_1 1
-#define GLB_SCC_2 2
-#define GLB_SCC_3 3
-
-typedef void (int_routine)(unsigned short interrupt_event);
-typedef int_routine *int_routine_ptr;
-typedef void *(alloc_routine)(int length);
-typedef void (free_routine)(int scc_num, int channel_num, void *buf);
-typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
-typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
-typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
-typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
-
-/* user defined functions for global errors */
-typedef void (handle_glob_overrun_routine)(int scc_number);
-typedef void (handle_glob_underrun_routine)(int scc_number);
-typedef void (glob_intr_q_overflow_routine)(int scc_number);
-
-/*
- * General initialization and command routines
- */
-void quicc_issue_cmd (unsigned short cmd, int scc_num);
-void quicc_init(void);
-void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_scc_start(int scc_num);
-void quicc_scc_loopback(int scc_num);
-
-/* Interrupt enable/disable routines for critical pieces of code*/
-unsigned short IntrDis(void);
-void IntrEna(unsigned short old_sr);
-
-/* For debugging */
-void print_rbd(int scc_num);
-void print_tbd(int scc_num);
-
-#endif
+++ /dev/null
-#include <asm-m68k/resource.h>
+++ /dev/null
-#include <asm-m68k/rtc.h>
+++ /dev/null
-#ifndef _M68KNOMMU_SCATTERLIST_H
-#define _M68KNOMMU_SCATTERLIST_H
-
-#include <linux/mm.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
-#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
+++ /dev/null
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
+++ /dev/null
-#ifndef _M68K_SEGMENT_H
-#define _M68K_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA (1)
-#ifndef __USER_DS
-#define __USER_DS (USER_DATA)
-#endif
-#define USER_PROGRAM (2)
-#define SUPER_DATA (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
- /* return the supervisor data space code */
- return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_SEGMENT_H */
+++ /dev/null
-#include <asm-m68k/sembuf.h>
+++ /dev/null
-#ifdef __KERNEL__
-
-#include <asm-m68k/setup.h>
-
-/* We have a bigger command line buffer. */
-#undef COMMAND_LINE_SIZE
-
-#endif /* __KERNEL__ */
-
-#define COMMAND_LINE_SIZE 512
+++ /dev/null
-#include <asm-m68k/shm.h>
+++ /dev/null
-#include <asm-m68k/shmbuf.h>
+++ /dev/null
-#include <asm-m68k/shmparam.h>
+++ /dev/null
-#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
-#define _ASM_M68KNOMMU_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_d0;
- unsigned long sc_d1;
- unsigned long sc_a0;
- unsigned long sc_a1;
- unsigned long sc_a5;
- unsigned short sc_sr;
- unsigned long sc_pc;
- unsigned short sc_formatvec;
-};
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_SIGINFO_H
-#define _M68KNOMMU_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_SIGNAL_H
-#define _M68KNOMMU_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_SIGNAL_H */
+++ /dev/null
-/* nothing required here yet */
+++ /dev/null
-#include <asm-m68k/socket.h>
+++ /dev/null
-#include <asm-m68k/sockios.h>
+++ /dev/null
-#include <asm-m68k/spinlock.h>
+++ /dev/null
-#include <asm-m68k/stat.h>
+++ /dev/null
-#include <asm-m68k/statfs.h>
+++ /dev/null
-#ifndef _M68KNOMMU_STRING_H_
-#define _M68KNOMMU_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_STRCPY
-static inline char * strcpy(char * dest,const char *src)
-{
- char *xdest = dest;
-
- __asm__ __volatile__
- ("1:\tmoveb %1@+,%0@+\n\t"
- "jne 1b"
- : "=a" (dest), "=a" (src)
- : "0" (dest), "1" (src) : "memory");
- return xdest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char * strncpy(char *dest, const char *src, size_t n)
-{
- char *xdest = dest;
-
- if (n == 0)
- return xdest;
-
- __asm__ __volatile__
- ("1:\tmoveb %1@+,%0@+\n\t"
- "jeq 2f\n\t"
- "subql #1,%2\n\t"
- "jne 1b\n\t"
- "2:"
- : "=a" (dest), "=a" (src), "=d" (n)
- : "0" (dest), "1" (src), "2" (n)
- : "memory");
- return xdest;
-}
-
-
-#ifndef CONFIG_COLDFIRE
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char * cs,const char * ct)
-{
- char __res;
-
- __asm__
- ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
- "cmpb %1@+,%2\n\t" /* compare a byte */
- "jne 2f\n\t" /* not equal, break out */
- "tstb %2\n\t" /* at end of cs? */
- "jne 1b\n\t" /* no, keep going */
- "jra 3f\n\t" /* strings are equal */
- "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */
- "3:"
- : "=a" (cs), "=a" (ct), "=d" (__res)
- : "0" (cs), "1" (ct));
-
- return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char * cs,const char * ct,size_t count)
-{
- char __res;
-
- if (!count)
- return 0;
- __asm__
- ("1:\tmovb %0@+,%3\n\t" /* get *cs */
- "cmpb %1@+,%3\n\t" /* compare a byte */
- "jne 3f\n\t" /* not equal, break out */
- "tstb %3\n\t" /* at end of cs? */
- "jeq 4f\n\t" /* yes, all done */
- "subql #1,%2\n\t" /* no, adjust count */
- "jne 1b\n\t" /* more to do, keep going */
- "2:\tmoveq #0,%3\n\t" /* strings are equal */
- "jra 4f\n\t"
- "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */
- "4:"
- : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
- : "0" (cs), "1" (ct), "2" (count));
- return __res;
-}
-
-#endif /* CONFIG_COLDFIRE */
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- * let user libraries deal with these,
- * IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
+++ /dev/null
-#ifndef _M68KNOMMU_SWAB_H
-#define _M68KNOMMU_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
- asm(
- "byterev %0"
- : "=d" (val)
- : "0" (val)
- );
- return val;
-}
-
-#define __arch_swab32 __arch_swab32
-#endif
-
-#endif /* _M68KNOMMU_SWAB_H */
+++ /dev/null
-#ifndef _M68KNOMMU_SYSTEM_H
-#define _M68KNOMMU_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) \
-{ \
- void *_last; \
- __asm__ __volatile__( \
- "movel %1, %%a0\n\t" \
- "movel %2, %%a1\n\t" \
- "jbsr resume\n\t" \
- "movel %%d1, %0\n\t" \
- : "=d" (_last) \
- : "d" (prev), "d" (next) \
- : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
- (last) = _last; \
-}
-
-#ifdef CONFIG_COLDFIRE
-#define local_irq_enable() __asm__ __volatile__ ( \
- "move %/sr,%%d0\n\t" \
- "andi.l #0xf8ff,%%d0\n\t" \
- "move %%d0,%/sr\n" \
- : /* no outputs */ \
- : \
- : "cc", "%d0", "memory")
-#define local_irq_disable() __asm__ __volatile__ ( \
- "move %/sr,%%d0\n\t" \
- "ori.l #0x0700,%%d0\n\t" \
- "move %%d0,%/sr\n" \
- : /* no outputs */ \
- : \
- : "cc", "%d0", "memory")
-/* For spinlocks etc */
-#define local_irq_save(x) __asm__ __volatile__ ( \
- "movew %%sr,%0\n\t" \
- "movew #0x0700,%%d0\n\t" \
- "or.l %0,%%d0\n\t" \
- "movew %%d0,%/sr" \
- : "=d" (x) \
- : \
- : "cc", "%d0", "memory")
-#else
-
-/* portable version */ /* FIXME - see entry.h*/
-#define ALLOWINT 0xf8ff
-
-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
-#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
-#endif
-
-#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
-#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
-
-/* For spinlocks etc */
-#ifndef local_irq_save
-#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
-#endif
-
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- ((flags & 0x0700) == 0x0700); \
-})
-
-#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop() asm volatile ("nop"::)
-#define mb() asm volatile ("" : : :"memory")
-#define rmb() asm volatile ("" : : :"memory")
-#define wmb() asm volatile ("" : : :"memory")
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#define read_barrier_depends() ((void)0)
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "moveb %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "movew %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "movel %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- local_irq_restore(flags);
- return tmp;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "1:\n\t"
- "casb %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "1:\n\t"
- "casw %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "1:\n\t"
- "casl %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
- defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({ \
- local_irq_disable(); \
- asm(" \
- moveal #0x10c00000, %a0; \
- moveb #0, 0xFFFFF300; \
- moveal 0(%a0), %sp; \
- moveal 4(%a0), %a0; \
- jmp (%a0); \
- "); \
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- jmp 0xf0000400; \
- "); \
-})
-#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
- defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- moveal #0x10000044, %a0; \
- movel #0xffffffff, (%a0); \
- moveal #0x10000001, %a0; \
- moveb #0x00, (%a0); \
- moveal #0xf0000004, %a0; \
- moveal (%a0), %a0; \
- jmp (%a0); \
- "); \
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %%sr; \
- move.l %0+0x40,%%d0; \
- and.l %0+0x44,%%d0; \
- andi.l #0xfffff000,%%d0; \
- mov.l %%d0,%%a0; \
- or.l 4(%%a0),%%d0; \
- mov.l %%d0,%%a0; \
- jmp (%%a0);" \
- : /* No output */ \
- : "o" (*(char *)MCF_MBAR) ); \
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({ \
- unsigned char volatile *reset; \
- asm("move.w #0x2700, %sr"); \
- reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \
- while(1) \
- *reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- movel #0x01000000, %sp; \
- moveal #0x40110000, %a0; \
- moveb #0x80, (%a0); \
- "); \
-})
-#elif defined(CONFIG_M520x)
- /*
- * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register
- * RCR), that when set, resets the MCF5208.
- */
-#define HARD_RESET_NOW() \
-({ \
- unsigned char volatile *reset; \
- asm("move.w #0x2700, %sr"); \
- reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \
- while(1) \
- *reset |= 0x80; \
-})
-#else
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- moveal #0x4, %a0; \
- moveal (%a0), %a0; \
- jmp (%a0); \
- "); \
-})
-#endif
-#endif
-#define arch_align_stack(x) (x)
-
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
- if (flags & 0x0700)
- return 0;
- else
- return 1;
-}
-
-#endif /* _M68KNOMMU_SYSTEM_H */
+++ /dev/null
-#include <asm-m68k/termbits.h>
+++ /dev/null
-#include <asm-m68k/termios.h>
+++ /dev/null
-/* thread_info.h: m68knommu low-level thread information
- * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE_ORDER (0)
-#else
-#define THREAD_SIZE_ORDER (1)
-#endif
-
-/*
- * for asm files, THREAD_SIZE is now generated by asm-offsets.c
- */
-#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-
-/*
- * low level task data.
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- int cpu; /* cpu we're on */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- __asm__(
- "move.l %%sp, %0 \n\t"
- "and.l %1, %0"
- : "=&d"(ti)
- : "di" (~(THREAD_SIZE-1))
- );
- return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE 0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
- TIF_NEED_RESCHED */
-#define TIF_MEMDIE 4
-#define TIF_FREEZE 16 /* is freezing for suspend */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
+++ /dev/null
-/*
- * linux/include/asm-m68knommu/timex.h
- *
- * m68knommu architecture timex specifications
- */
-#ifndef _ASM_M68KNOMMU_TIMEX_H
-#define _ASM_M68KNOMMU_TIMEX_H
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#define CLOCK_TICK_RATE MCF_CLK
-#else
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-#endif
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#endif
+++ /dev/null
-#include <asm-m68k/tlb.h>
+++ /dev/null
-#ifndef _M68KNOMMU_TLBFLUSH_H
-#define _M68KNOMMU_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
- BUG();
-}
-
-#endif /* _M68KNOMMU_TLBFLUSH_H */
+++ /dev/null
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
+++ /dev/null
-/*
- * linux/include/asm/traps.h
- *
- * Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _M68KNOMMU_TRAPS_H
-#define _M68KNOMMU_TRAPS_H
-
-#ifndef __ASSEMBLY__
-
-typedef void (*e_vector)(void);
-
-extern e_vector vectors[];
-extern void init_vectors(void);
-extern void enable_vector(unsigned int irq);
-extern void disable_vector(unsigned int irq);
-extern void ack_vector(unsigned int irq);
-
-#endif
-
-#define VEC_BUSERR (2)
-#define VEC_ADDRERR (3)
-#define VEC_ILLEGAL (4)
-#define VEC_ZERODIV (5)
-#define VEC_CHK (6)
-#define VEC_TRAP (7)
-#define VEC_PRIV (8)
-#define VEC_TRACE (9)
-#define VEC_LINE10 (10)
-#define VEC_LINE11 (11)
-#define VEC_RESV1 (12)
-#define VEC_COPROC (13)
-#define VEC_FORMAT (14)
-#define VEC_UNINT (15)
-#define VEC_SPUR (24)
-#define VEC_INT1 (25)
-#define VEC_INT2 (26)
-#define VEC_INT3 (27)
-#define VEC_INT4 (28)
-#define VEC_INT5 (29)
-#define VEC_INT6 (30)
-#define VEC_INT7 (31)
-#define VEC_SYS (32)
-#define VEC_TRAP1 (33)
-#define VEC_TRAP2 (34)
-#define VEC_TRAP3 (35)
-#define VEC_TRAP4 (36)
-#define VEC_TRAP5 (37)
-#define VEC_TRAP6 (38)
-#define VEC_TRAP7 (39)
-#define VEC_TRAP8 (40)
-#define VEC_TRAP9 (41)
-#define VEC_TRAP10 (42)
-#define VEC_TRAP11 (43)
-#define VEC_TRAP12 (44)
-#define VEC_TRAP13 (45)
-#define VEC_TRAP14 (46)
-#define VEC_TRAP15 (47)
-#define VEC_FPBRUC (48)
-#define VEC_FPIR (49)
-#define VEC_FPDIVZ (50)
-#define VEC_FPUNDER (51)
-#define VEC_FPOE (52)
-#define VEC_FPOVER (53)
-#define VEC_FPNAN (54)
-#define VEC_FPUNSUP (55)
-#define VEC_UNIMPEA (60)
-#define VEC_UNIMPII (61)
-#define VEC_USER (64)
-
-#define VECOFF(vec) ((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T (0x8000)
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#define PS_C (0x0001)
-
-/* structure for stack frames */
-
-struct frame {
- struct pt_regs ptregs;
- union {
- struct {
- unsigned long iaddr; /* instruction address */
- } fmt2;
- struct {
- unsigned long effaddr; /* effective address */
- } fmt3;
- struct {
- unsigned long effaddr; /* effective address */
- unsigned long pc; /* pc of faulted instr */
- } fmt4;
- struct {
- unsigned long effaddr; /* effective address */
- unsigned short ssw; /* special status word */
- unsigned short wb3s; /* write back 3 status */
- unsigned short wb2s; /* write back 2 status */
- unsigned short wb1s; /* write back 1 status */
- unsigned long faddr; /* fault address */
- unsigned long wb3a; /* write back 3 address */
- unsigned long wb3d; /* write back 3 data */
- unsigned long wb2a; /* write back 2 address */
- unsigned long wb2d; /* write back 2 data */
- unsigned long wb1a; /* write back 1 address */
- unsigned long wb1dpd0; /* write back 1 data/push data 0*/
- unsigned long pd1; /* push data 1*/
- unsigned long pd2; /* push data 2*/
- unsigned long pd3; /* push data 3*/
- } fmt7;
- struct {
- unsigned long iaddr; /* instruction address */
- unsigned short int1[4]; /* internal registers */
- } fmt9;
- struct {
- unsigned short int1;
- unsigned short ssw; /* special status word */
- unsigned short isc; /* instruction stage c */
- unsigned short isb; /* instruction stage b */
- unsigned long daddr; /* data cycle fault address */
- unsigned short int2[2];
- unsigned long dobuf; /* data cycle output buffer */
- unsigned short int3[2];
- } fmta;
- struct {
- unsigned short int1;
- unsigned short ssw; /* special status word */
- unsigned short isc; /* instruction stage c */
- unsigned short isb; /* instruction stage b */
- unsigned long daddr; /* data cycle fault address */
- unsigned short int2[2];
- unsigned long dobuf; /* data cycle output buffer */
- unsigned short int3[4];
- unsigned long baddr; /* stage B address */
- unsigned short int4[2];
- unsigned long dibuf; /* data cycle input buffer */
- unsigned short int5[3];
- unsigned ver : 4; /* stack frame version # */
- unsigned int6:12;
- unsigned short int7[18];
- } fmtb;
- } un;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68KNOMMU_TRAPS_H */
+++ /dev/null
-#include <asm-m68k/types.h>
+++ /dev/null
-#ifndef __M68KNOMMU_UACCESS_H
-#define __M68KNOMMU_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
-
-/*
- * It is not enough to just have access_ok check for a real RAM address.
- * This would disallow the case of code/ro-data running XIP in flash/rom.
- * Ideally we would check the possible flash ranges too, but that is
- * currently not so easy.
- */
-static inline int _access_ok(unsigned long addr, unsigned long size)
-{
- return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr) \
-({ \
- int __pu_err = 0; \
- typeof(*(ptr)) __pu_val = (x); \
- switch (sizeof (*(ptr))) { \
- case 1: \
- __put_user_asm(__pu_err, __pu_val, ptr, b); \
- break; \
- case 2: \
- __put_user_asm(__pu_err, __pu_val, ptr, w); \
- break; \
- case 4: \
- __put_user_asm(__pu_err, __pu_val, ptr, l); \
- break; \
- case 8: \
- memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-#define __put_user_asm(err,x,ptr,bwl) \
- __asm__ ("move" #bwl " %0,%1" \
- : /* no outputs */ \
- :"d" (x),"m" (*__ptr(ptr)) : "memory")
-
-#define get_user(x, ptr) \
-({ \
- int __gu_err = 0; \
- typeof(x) __gu_val = 0; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \
- break; \
- case 2: \
- __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \
- break; \
- case 4: \
- __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \
- break; \
- case 8: \
- memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \
- break; \
- default: \
- __gu_val = 0; \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- (x) = (typeof(*(ptr))) __gu_val; \
- __gu_err; \
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define __get_user_asm(err,x,ptr,bwl,reg) \
- __asm__ ("move" #bwl " %1,%0" \
- : "=d" (x) \
- : "m" (*__ptr(ptr)))
-
-#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
- char *tmp;
- strncpy(dst, src, count);
- for (tmp = dst; *tmp && count > 0; tmp++, count--)
- ;
- return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
- return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-__clear_user(void *to, unsigned long n)
-{
- memset(to, 0, n);
- return 0;
-}
-
-#define clear_user(to,n) __clear_user(to,n)
-
-#endif /* _M68KNOMMU_UACCESS_H */
+++ /dev/null
-#ifndef _M68KNOMMU_UCONTEXT_H
-#define _M68KNOMMU_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 18
-typedef greg_t gregset_t[NGREG];
-
-typedef struct fpregset {
- int f_pcr;
- int f_psr;
- int f_fpiaddr;
- int f_fpregs[8][3];
-} fpregset_t;
-
-struct mcontext {
- int version;
- gregset_t gregs;
- fpregset_t fpregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct mcontext uc_mcontext;
- unsigned long uc_filler[80];
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif
+++ /dev/null
-#ifndef _ASM_M68KNOMMU_UNALIGNED_H
-#define _ASM_M68KNOMMU_UNALIGNED_H
-
-
-#ifdef CONFIG_COLDFIRE
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#else
-/*
- * The m68k can do unaligned accesses itself.
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif
-
-#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
+++ /dev/null
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-#define __NR_vserver 278
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-#define __NR_signalfd4 323
-#define __NR_eventfd2 324
-#define __NR_epoll_create1 325
-#define __NR_dup3 326
-#define __NR_pipe2 327
-#define __NR_inotify_init1 328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
+++ /dev/null
-#include <asm-m68k/user.h>
setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_COMEMPCI) += comempci.o
+++ /dev/null
-/*****************************************************************************/
-
-/*
- * comemlite.c -- PCI access code for embedded CO-MEM Lite PCI controller.
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com).
- * (C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/*****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ptrace.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/irq.h>
-#include <asm/anchor.h>
-
-#ifdef CONFIG_eLIA
-#include <asm/elia.h>
-#endif
-
-/*****************************************************************************/
-
-/*
- * Debug configuration defines. DEBUGRES sets debugging output for
- * the resource allocation phase. DEBUGPCI traces on pcibios_ function
- * calls, and DEBUGIO traces all accesses to devices on the PCI bus.
- */
-/*#define DEBUGRES 1*/
-/*#define DEBUGPCI 1*/
-/*#define DEBUGIO 1*/
-
-/*****************************************************************************/
-
-/*
- * PCI markers for bus present and active slots.
- */
-int pci_bus_is_present = 0;
-unsigned long pci_slotmask = 0;
-
-/*
- * We may or may not need to swap the bytes of PCI bus tranfers.
- * The endianess is re-roder automatically by the CO-MEM, but it
- * will get the wrong byte order for a pure data stream.
- */
-#define pci_byteswap 0
-
-
-/*
- * Resource tracking. The CO-MEM part creates a virtual address
- * space that all the PCI devices live in - it is not in any way
- * directly mapped into the ColdFire address space. So we can
- * really assign any resources we like to devices, as long as
- * they do not clash with other PCI devices.
- */
-unsigned int pci_iobase = PCIBIOS_MIN_IO; /* Arbitrary start address */
-unsigned int pci_membase = PCIBIOS_MIN_MEM; /* Arbitrary start address */
-
-#define PCI_MINIO 0x100 /* 256 byte minimum I/O */
-#define PCI_MINMEM 0x00010000 /* 64k minimum chunk */
-
-/*
- * The CO-MEM's shared memory segment is visible inside the PCI
- * memory address space. We need to keep track of the address that
- * this is mapped at, to setup the bus masters pointers.
- */
-unsigned int pci_shmemaddr;
-
-/*****************************************************************************/
-
-void pci_interrupt(int irq, void *id, struct pt_regs *fp);
-
-/*****************************************************************************/
-
-/*
- * Some platforms have custom ways of reseting the PCI bus.
- */
-
-void pci_resetbus(void)
-{
-#ifdef CONFIG_eLIA
- int i;
-
-#ifdef DEBUGPCI
- printk(KERN_DEBUG "pci_resetbus()\n");
-#endif
-
- *((volatile unsigned short *) (MCF_MBAR+MCFSIM_PADDR)) |= eLIA_PCIRESET;
- for (i = 0; (i < 1000); i++) {
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT)) =
- (ppdata | eLIA_PCIRESET);
- }
-
-
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT)) = ppdata;
-#endif
-}
-
-/*****************************************************************************/
-
-int pcibios_assign_resource_slot(int slot)
-{
- volatile unsigned long *rp;
- volatile unsigned char *ip;
- unsigned int idsel, addr, val, align, i;
- int bar;
-
-#ifdef DEBUGPCI
- printk(KERN_INFO "pcibios_assign_resource_slot(slot=%x)\n", slot);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- idsel = COMEM_DA_ADDR(0x1 << (slot + 16));
-
- /* Try to assign resource to each BAR */
- for (bar = 0; (bar < 6); bar++) {
- addr = COMEM_PCIBUS + PCI_BASE_ADDRESS_0 + (bar * 4);
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
- val = rp[LREG(addr)];
-#ifdef DEBUGRES
- printk(KERN_DEBUG "-----------------------------------"
- "-------------------------------------\n");
- printk(KERN_DEBUG "BAR[%d]: read=%08x ", bar, val);
-#endif
-
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
- rp[LREG(addr)] = 0xffffffff;
-
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
- val = rp[LREG(addr)];
-#ifdef DEBUGRES
- printk(KERN_DEBUG "write=%08x ", val);
-#endif
- if (val == 0) {
-#ifdef DEBUGRES
- printk(KERN_DEBUG "\n");
-#endif
- continue;
- }
-
- /* Determine space required by BAR */
- /* FIXME: this should go backwords from 0x80000000... */
- for (i = 0; (i < 32); i++) {
- if ((0x1 << i) & (val & 0xfffffffc))
- break;
- }
-
-#ifdef DEBUGRES
- printk(KERN_DEBUG "size=%08x(%d)\n", (0x1 << i), i);
-#endif
- i = 0x1 << i;
-
- /* Assign a resource */
- if (val & PCI_BASE_ADDRESS_SPACE_IO) {
- if (i < PCI_MINIO)
- i = PCI_MINIO;
-#ifdef DEBUGRES
- printk(KERN_DEBUG "BAR[%d]: IO size=%08x iobase=%08x\n",
- bar, i, pci_iobase);
-#endif
- if (i > 0xffff) {
- /* Invalid size?? */
- val = 0 | PCI_BASE_ADDRESS_SPACE_IO;
-#ifdef DEBUGRES
- printk(KERN_DEBUG "BAR[%d]: too big for IO??\n", bar);
-#endif
- } else {
- /* Check for un-alignment */
- if ((align = pci_iobase % i))
- pci_iobase += (i - align);
- val = pci_iobase | PCI_BASE_ADDRESS_SPACE_IO;
- pci_iobase += i;
- }
- } else {
- if (i < PCI_MINMEM)
- i = PCI_MINMEM;
-#ifdef DEBUGRES
- printk(KERN_DEBUG "BAR[%d]: MEMORY size=%08x membase=%08x\n",
- bar, i, pci_membase);
-#endif
- /* Check for un-alignment */
- if ((align = pci_membase % i))
- pci_membase += (i - align);
- val = pci_membase | PCI_BASE_ADDRESS_SPACE_MEMORY;
- pci_membase += i;
- }
-
- /* Write resource back into BAR register */
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
- rp[LREG(addr)] = val;
-#ifdef DEBUGRES
- printk(KERN_DEBUG "BAR[%d]: assigned bar=%08x\n", bar, val);
-#endif
- }
-
-#ifdef DEBUGRES
- printk(KERN_DEBUG "-----------------------------------"
- "-------------------------------------\n");
-#endif
-
- /* Assign IRQ if one is wanted... */
- ip = (volatile unsigned char *) (COMEM_BASE + COMEM_PCIBUS);
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
-
- addr = (PCI_INTERRUPT_PIN & 0xfc) + (~PCI_INTERRUPT_PIN & 0x03);
- if (ip[addr]) {
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
- addr = (PCI_INTERRUPT_LINE & 0xfc)+(~PCI_INTERRUPT_LINE & 0x03);
- ip[addr] = 25;
-#ifdef DEBUGRES
- printk(KERN_DEBUG "IRQ LINE=25\n");
-#endif
- }
-
- return(0);
-}
-
-/*****************************************************************************/
-
-int pcibios_enable_slot(int slot)
-{
- volatile unsigned long *rp;
- volatile unsigned short *wp;
- unsigned int idsel, addr;
- unsigned short cmd;
-
-#ifdef DEBUGPCI
- printk(KERN_DEBUG "pcibios_enbale_slot(slot=%x)\n", slot);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- wp = (volatile unsigned short *) COMEM_BASE;
- idsel = COMEM_DA_ADDR(0x1 << (slot + 16));
-
- /* Get current command settings */
- addr = COMEM_PCIBUS + PCI_COMMAND;
- addr = (addr & ~0x3) + (~addr & 0x02);
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
- cmd = wp[WREG(addr)];
- /*val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);*/
-
- /* Enable I/O and memory accesses to this device */
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
- cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
- wp[WREG(addr)] = cmd;
-
- return(0);
-}
-
-/*****************************************************************************/
-
-void pcibios_assign_resources(void)
-{
- volatile unsigned long *rp;
- unsigned long sel, id;
- int slot;
-
- rp = (volatile unsigned long *) COMEM_BASE;
-
- /*
- * Do a quick scan of the PCI bus and see what is here.
- */
- for (slot = COMEM_MINDEV; (slot <= COMEM_MAXDEV); slot++) {
- sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16));
- rp[LREG(COMEM_DAHBASE)] = sel;
- rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */
- id = rp[LREG(COMEM_PCIBUS)];
- if ((id != 0) && ((id & 0xffff0000) != (sel & 0xffff0000))) {
- printk(KERN_INFO "PCI: slot=%d id=%08x\n", slot, (int) id);
- pci_slotmask |= 0x1 << slot;
- pcibios_assign_resource_slot(slot);
- pcibios_enable_slot(slot);
- }
- }
-}
-
-/*****************************************************************************/
-
-int pcibios_init(void)
-{
- volatile unsigned long *rp;
- unsigned long sel, id;
- int slot;
-
-#ifdef DEBUGPCI
- printk(KERN_DEBUG "pcibios_init()\n");
-#endif
-
- pci_resetbus();
-
- /*
- * Do some sort of basic check to see if the CO-MEM part
- * is present... This works ok, but I think we really need
- * something better...
- */
- rp = (volatile unsigned long *) COMEM_BASE;
- if ((rp[LREG(COMEM_LBUSCFG)] & 0xff) != 0x50) {
- printk(KERN_INFO "PCI: no PCI bus present\n");
- return(0);
- }
-
-#ifdef COMEM_BRIDGEDEV
- /*
- * Setup the PCI bridge device first. It needs resources too,
- * so that bus masters can get to its shared memory.
- */
- slot = COMEM_BRIDGEDEV;
- sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16));
- rp[LREG(COMEM_DAHBASE)] = sel;
- rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */
- id = rp[LREG(COMEM_PCIBUS)];
- if ((id == 0) || ((id & 0xffff0000) == (sel & 0xffff0000))) {
- printk(KERN_INFO "PCI: no PCI bus bridge present\n");
- return(0);
- }
-
- printk(KERN_INFO "PCI: bridge device at slot=%d id=%08x\n", slot, (int) id);
- pci_slotmask |= 0x1 << slot;
- pci_shmemaddr = pci_membase;
- pcibios_assign_resource_slot(slot);
- pcibios_enable_slot(slot);
-#endif
-
- pci_bus_is_present = 1;
-
- /* Get PCI irq for local vectoring */
- if (request_irq(COMEM_IRQ, pci_interrupt, 0, "PCI bridge", NULL)) {
- printk(KERN_WARNING "PCI: failed to acquire interrupt %d\n", COMEM_IRQ);
- } else {
- mcf_autovector(COMEM_IRQ);
- }
-
- pcibios_assign_resources();
-
- return(0);
-}
-
-/*****************************************************************************/
-
-char *pcibios_setup(char *option)
-{
- /* Nothing for us to handle. */
- return(option);
-}
-/*****************************************************************************/
-
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-/*****************************************************************************/
-
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
-}
-
-/*****************************************************************************/
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- int slot;
-
- slot = PCI_SLOT(dev->devfn);
- if ((dev->bus == 0) && (pci_slotmask & (1 << slot)))
- pcibios_enable_slot(slot);
- return(0);
-}
-
-/*****************************************************************************/
-
-/*
- * Local routines to interrcept the standard I/O and vector handling
- * code. Don't include this 'till now - initialization code above needs
- * access to the real code too.
- */
-#include <asm/mcfpci.h>
-
-/*****************************************************************************/
-
-void pci_outb(unsigned char val, unsigned int addr)
-{
- volatile unsigned long *rp;
- volatile unsigned char *bp;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_outb(val=%02x,addr=%x)\n", val, addr);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- bp = (volatile unsigned char *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr);
- addr = (addr & ~0x3) + (~addr & 0x03);
- bp[(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val;
-}
-
-/*****************************************************************************/
-
-void pci_outw(unsigned short val, unsigned int addr)
-{
- volatile unsigned long *rp;
- volatile unsigned short *sp;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_outw(val=%04x,addr=%x)\n", val, addr);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- sp = (volatile unsigned short *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr);
- addr = (addr & ~0x3) + (~addr & 0x02);
- if (pci_byteswap)
- val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);
- sp[WREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val;
-}
-
-/*****************************************************************************/
-
-void pci_outl(unsigned int val, unsigned int addr)
-{
- volatile unsigned long *rp;
- volatile unsigned int *lp;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_outl(val=%08x,addr=%x)\n", val, addr);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- lp = (volatile unsigned int *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr);
-
- if (pci_byteswap)
- val = (val << 24) | ((val & 0x0000ff00) << 8) |
- ((val & 0x00ff0000) >> 8) | (val >> 24);
-
- lp[LREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val;
-}
-
-/*****************************************************************************/
-
-unsigned long pci_blmask[] = {
- 0x000000e0,
- 0x000000d0,
- 0x000000b0,
- 0x00000070
-};
-
-unsigned char pci_inb(unsigned int addr)
-{
- volatile unsigned long *rp;
- volatile unsigned char *bp;
- unsigned long r;
- unsigned char val;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_inb(addr=%x)\n", addr);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- bp = (volatile unsigned char *) COMEM_BASE;
-
- r = COMEM_DA_IORD | COMEM_DA_ADDR(addr) | pci_blmask[(addr & 0x3)];
- rp[LREG(COMEM_DAHBASE)] = r;
-
- addr = (addr & ~0x3) + (~addr & 0x3);
- val = bp[(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))];
- return(val);
-}
-
-/*****************************************************************************/
-
-unsigned long pci_bwmask[] = {
- 0x000000c0,
- 0x000000c0,
- 0x00000030,
- 0x00000030
-};
-
-unsigned short pci_inw(unsigned int addr)
-{
- volatile unsigned long *rp;
- volatile unsigned short *sp;
- unsigned long r;
- unsigned short val;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_inw(addr=%x)", addr);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- r = COMEM_DA_IORD | COMEM_DA_ADDR(addr) | pci_bwmask[(addr & 0x3)];
- rp[LREG(COMEM_DAHBASE)] = r;
-
- sp = (volatile unsigned short *) COMEM_BASE;
- addr = (addr & ~0x3) + (~addr & 0x02);
- val = sp[WREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))];
- if (pci_byteswap)
- val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);
-#ifdef DEBUGIO
- printk(KERN_DEBUG "=%04x\n", val);
-#endif
- return(val);
-}
-
-/*****************************************************************************/
-
-unsigned int pci_inl(unsigned int addr)
-{
- volatile unsigned long *rp;
- volatile unsigned int *lp;
- unsigned int val;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_inl(addr=%x)", addr);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- lp = (volatile unsigned int *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(addr);
- val = lp[LREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))];
-
- if (pci_byteswap)
- val = (val << 24) | ((val & 0x0000ff00) << 8) |
- ((val & 0x00ff0000) >> 8) | (val >> 24);
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "=%08x\n", val);
-#endif
- return(val);
-}
-
-/*****************************************************************************/
-
-void pci_outsb(void *addr, void *buf, int len)
-{
- volatile unsigned long *rp;
- volatile unsigned char *bp;
- unsigned char *dp = (unsigned char *) buf;
- unsigned int a = (unsigned int) addr;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_outsb(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a);
-
- a = (a & ~0x3) + (~a & 0x03);
- bp = (volatile unsigned char *)
- (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
- while (len--)
- *bp = *dp++;
-}
-
-/*****************************************************************************/
-
-void pci_outsw(void *addr, void *buf, int len)
-{
- volatile unsigned long *rp;
- volatile unsigned short *wp;
- unsigned short w, *dp = (unsigned short *) buf;
- unsigned int a = (unsigned int) addr;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_outsw(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a);
-
- a = (a & ~0x3) + (~a & 0x2);
- wp = (volatile unsigned short *)
- (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
- while (len--) {
- w = *dp++;
- if (pci_byteswap)
- w = ((w & 0xff) << 8) | ((w >> 8) & 0xff);
- *wp = w;
- }
-}
-
-/*****************************************************************************/
-
-void pci_outsl(void *addr, void *buf, int len)
-{
- volatile unsigned long *rp;
- volatile unsigned long *lp;
- unsigned long l, *dp = (unsigned long *) buf;
- unsigned int a = (unsigned int) addr;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_outsl(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a);
-
- lp = (volatile unsigned long *)
- (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
- while (len--) {
- l = *dp++;
- if (pci_byteswap)
- l = (l << 24) | ((l & 0x0000ff00) << 8) |
- ((l & 0x00ff0000) >> 8) | (l >> 24);
- *lp = l;
- }
-}
-
-/*****************************************************************************/
-
-void pci_insb(void *addr, void *buf, int len)
-{
- volatile unsigned long *rp;
- volatile unsigned char *bp;
- unsigned char *dp = (unsigned char *) buf;
- unsigned int a = (unsigned int) addr;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_insb(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a);
-
- a = (a & ~0x3) + (~a & 0x03);
- bp = (volatile unsigned char *)
- (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
- while (len--)
- *dp++ = *bp;
-}
-
-/*****************************************************************************/
-
-void pci_insw(void *addr, void *buf, int len)
-{
- volatile unsigned long *rp;
- volatile unsigned short *wp;
- unsigned short w, *dp = (unsigned short *) buf;
- unsigned int a = (unsigned int) addr;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_insw(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a);
-
- a = (a & ~0x3) + (~a & 0x2);
- wp = (volatile unsigned short *)
- (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
- while (len--) {
- w = *wp;
- if (pci_byteswap)
- w = ((w & 0xff) << 8) | ((w >> 8) & 0xff);
- *dp++ = w;
- }
-}
-
-/*****************************************************************************/
-
-void pci_insl(void *addr, void *buf, int len)
-{
- volatile unsigned long *rp;
- volatile unsigned long *lp;
- unsigned long l, *dp = (unsigned long *) buf;
- unsigned int a = (unsigned int) addr;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_insl(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
- rp = (volatile unsigned long *) COMEM_BASE;
- rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a);
-
- lp = (volatile unsigned long *)
- (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
- while (len--) {
- l = *lp;
- if (pci_byteswap)
- l = (l << 24) | ((l & 0x0000ff00) << 8) |
- ((l & 0x00ff0000) >> 8) | (l >> 24);
- *dp++ = l;
- }
-}
-
-/*****************************************************************************/
-
-struct pci_localirqlist {
- void (*handler)(int, void *, struct pt_regs *);
- const char *device;
- void *dev_id;
-};
-
-struct pci_localirqlist pci_irqlist[COMEM_MAXPCI];
-
-/*****************************************************************************/
-
-int pci_request_irq(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long flags, const char *device, void *dev_id)
-{
- int i;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_request_irq(irq=%d,handler=%x,flags=%x,device=%s,"
- "dev_id=%x)\n", irq, (int) handler, (int) flags, device,
- (int) dev_id);
-#endif
-
- /* Check if this interrupt handler is already lodged */
- for (i = 0; (i < COMEM_MAXPCI); i++) {
- if (pci_irqlist[i].handler == handler)
- return(0);
- }
-
- /* Find a free spot to put this handler */
- for (i = 0; (i < COMEM_MAXPCI); i++) {
- if (pci_irqlist[i].handler == 0) {
- pci_irqlist[i].handler = handler;
- pci_irqlist[i].device = device;
- pci_irqlist[i].dev_id = dev_id;
- return(0);
- }
- }
-
- /* Couldn't fit?? */
- return(1);
-}
-
-/*****************************************************************************/
-
-void pci_free_irq(unsigned int irq, void *dev_id)
-{
- int i;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_free_irq(irq=%d,dev_id=%x)\n", irq, (int) dev_id);
-#endif
-
- if (dev_id == (void *) NULL)
- return;
-
- /* Check if this interrupt handler is lodged */
- for (i = 0; (i < COMEM_MAXPCI); i++) {
- if (pci_irqlist[i].dev_id == dev_id) {
- pci_irqlist[i].handler = NULL;
- pci_irqlist[i].device = NULL;
- pci_irqlist[i].dev_id = NULL;
- break;
- }
- }
-}
-
-/*****************************************************************************/
-
-void pci_interrupt(int irq, void *id, struct pt_regs *fp)
-{
- int i;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_interrupt(irq=%d,id=%x,fp=%x)\n", irq, (int) id, (int) fp);
-#endif
-
- for (i = 0; (i < COMEM_MAXPCI); i++) {
- if (pci_irqlist[i].handler)
- (*pci_irqlist[i].handler)(irq,pci_irqlist[i].dev_id,fp);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * The shared memory region is broken up into contiguous 512 byte
- * regions for easy allocation... This is not an optimal solution
- * but it makes allocation and freeing regions really easy.
- */
-
-#define PCI_MEMSLOTSIZE 512
-#define PCI_MEMSLOTS (COMEM_SHMEMSIZE / PCI_MEMSLOTSIZE)
-
-char pci_shmemmap[PCI_MEMSLOTS];
-
-
-void *pci_bmalloc(int size)
-{
- int i, j, nrslots;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_bmalloc(size=%d)\n", size);
-#endif
-
- if (size <= 0)
- return((void *) NULL);
-
- nrslots = (size - 1) / PCI_MEMSLOTSIZE;
-
- for (i = 0; (i < (PCI_MEMSLOTS-nrslots)); i++) {
- if (pci_shmemmap[i] == 0) {
- for (j = i+1; (j < (i+nrslots)); j++) {
- if (pci_shmemmap[j])
- goto restart;
- }
-
- for (j = i; (j <= i+nrslots); j++)
- pci_shmemmap[j] = 1;
- break;
- }
-restart:
- }
-
- return((void *) (COMEM_BASE + COMEM_SHMEM + (i * PCI_MEMSLOTSIZE)));
-}
-
-/*****************************************************************************/
-
-void pci_bmfree(void *mp, int size)
-{
- int i, j, nrslots;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_bmfree(mp=%x,size=%d)\n", (int) mp, size);
-#endif
-
- nrslots = size / PCI_MEMSLOTSIZE;
- i = (((unsigned long) mp) - (COMEM_BASE + COMEM_SHMEM)) /
- PCI_MEMSLOTSIZE;
-
- for (j = i; (j < (i+nrslots)); j++)
- pci_shmemmap[j] = 0;
-}
-
-/*****************************************************************************/
-
-unsigned long pci_virt_to_bus(volatile void *address)
-{
- unsigned long l;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_virt_to_bus(address=%x)", (int) address);
-#endif
-
- l = ((unsigned long) address) - COMEM_BASE;
-#ifdef DEBUGIO
- printk(KERN_DEBUG "=%x\n", (int) (l+pci_shmemaddr));
-#endif
- return(l + pci_shmemaddr);
-}
-
-/*****************************************************************************/
-
-void *pci_bus_to_virt(unsigned long address)
-{
- unsigned long l;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_bus_to_virt(address=%x)", (int) address);
-#endif
-
- l = address - pci_shmemaddr;
-#ifdef DEBUGIO
- printk(KERN_DEBUG "=%x\n", (int) (address + COMEM_BASE));
-#endif
- return((void *) (address + COMEM_BASE));
-}
-
-/*****************************************************************************/
-
-void pci_bmcpyto(void *dst, void *src, int len)
-{
- unsigned long *dp, *sp, val;
- unsigned char *dcp, *scp;
- int i, j;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_bmcpyto(dst=%x,src=%x,len=%d)\n", (int)dst, (int)src, len);
-#endif
-
- dp = (unsigned long *) dst;
- sp = (unsigned long *) src;
- i = len >> 2;
-
-#if 0
- printk(KERN_INFO "DATA:");
- scp = (unsigned char *) sp;
- for (i = 0; (i < len); i++) {
- if ((i % 16) == 0) printk(KERN_INFO "\n%04x: ", i);
- printk(KERN_INFO "%02x ", *scp++);
- }
- printk(KERN_INFO "\n");
-#endif
-
- for (j = 0; (i >= 0); i--, j++) {
- val = *sp++;
- val = (val << 24) | ((val & 0x0000ff00) << 8) |
- ((val & 0x00ff0000) >> 8) | (val >> 24);
- *dp++ = val;
- }
-
- if (len & 0x3) {
- dcp = (unsigned char *) dp;
- scp = ((unsigned char *) sp) + 3;
- for (i = 0; (i < (len & 0x3)); i++)
- *dcp++ = *scp--;
- }
-}
-
-/*****************************************************************************/
-
-void pci_bmcpyfrom(void *dst, void *src, int len)
-{
- unsigned long *dp, *sp, val;
- unsigned char *dcp, *scp;
- int i;
-
-#ifdef DEBUGIO
- printk(KERN_DEBUG "pci_bmcpyfrom(dst=%x,src=%x,len=%d)\n",(int)dst,(int)src,len);
-#endif
-
- dp = (unsigned long *) dst;
- sp = (unsigned long *) src;
- i = len >> 2;
-
- for (; (i >= 0); i--) {
- val = *sp++;
- val = (val << 24) | ((val & 0x0000ff00) << 8) |
- ((val & 0x00ff0000) >> 8) | (val >> 24);
- *dp++ = val;
- }
-
- if (len & 0x3) {
- dcp = ((unsigned char *) dp) + 3;
- scp = (unsigned char *) sp;
- for (i = 0; (i < (len & 0x3)); i++)
- *dcp++ = *scp--;
- }
-
-#if 0
- printk(KERN_INFO "DATA:");
- dcp = (unsigned char *) dst;
- for (i = 0; (i < len); i++) {
- if ((i % 16) == 0) printk(KERN_INFO "\n%04x: ", i);
- printk(KERN_INFO "%02x ", *dcp++);
- }
- printk(KERN_INFO "\n");
-#endif
-}
-
-/*****************************************************************************/
-
-void *pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma_addr)
-{
- void *mp;
- if ((mp = pci_bmalloc(size)) != NULL) {
- dma_addr = mp - (COMEM_BASE + COMEM_SHMEM);
- return(mp);
- }
- *dma_addr = (dma_addr_t) NULL;
- return(NULL);
-}
-
-/*****************************************************************************/
-
-void pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr)
-{
- pci_bmfree(cpu_addr, size);
-}
-
-/*****************************************************************************/
struct sigcontext context;
int err = 0;
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
/* get previous context */
if (copy_from_user(&context, usc, sizeof(context)))
goto badframe;
unsigned long usp;
int err;
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
err = __get_user(temp, &uc->uc_mcontext.version);
if (temp != MCONTEXT_VERSION)
goto badframe;
regs->d0 = -EINTR;
break;
+ case -ERESTART_RESTARTBLOCK:
+ if (!has_handler) {
+ regs->d0 = __NR_restart_syscall;
+ regs->pc -= 2;
+ break;
+ }
+ regs->d0 = -EINTR;
+ break;
+
case -ERESTARTSYS:
if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
regs->d0 = -EINTR;
.text
ALIGN
ENTRY(sys_call_table)
- .long sys_ni_syscall /* 0 - old "setup()" system call*/
+ .long sys_restart_syscall /* 0 - old "setup()" system call */
.long sys_exit
.long sys_fork
.long sys_read
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+#if defined(CONFIG_NETtel) || \
defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
static struct mcf_platform_uart m532x_uart_platform[] = {
{
- .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
- .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
- .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
default: irq = 32; icr = MCFSIM_ICR_TIMER1; break;
}
- icrp = (volatile unsigned char *) (MCF_MBAR + icr);
+ icrp = (volatile unsigned char *) (icr);
*icrp = level;
mcf_enable_irq0(irq);
}
RESTORE_LOCAL
ENTRY(ret_from_interrupt)
- moveb %sp@(PT_SR),%d0
- andl #0x7,%d0
- jeq 1f
-
- RESTORE_ALL
-
-1:
- /* check if we need to do software interrupts */
- movel irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0
- jeq ret_from_exception
-
- pea ret_from_exception
- jmp do_softirq
+ /* the fasthandler is confusing me, haven't seen any user */
+ jmp ret_from_exception
/*
* Beware - when entering resume, prev (the current task) is
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_PMCTWILED=y
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
source "fs/Kconfig"
-# XXX source "arch/ppc/8xx_io/Kconfig"
-
-# XXX source "arch/ppc/8260_io/Kconfig"
-
source "arch/powerpc/sysdev/qe_lib/Kconfig"
source "lib/Kconfig"
static bd_t bd;
-static void warp_fixup_one_nor(u32 from, u32 to)
-{
- void *devp;
- char name[50];
- u32 v[2];
-
- sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
-
- devp = finddevice(name);
- if (!devp)
- return;
-
- if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
- v[0] = to;
- setprop(devp, "reg", v, sizeof(v));
-
- printf("NOR 64M fixup %x -> %x\r\n", from, to);
- }
-}
-
-
static void warp_fixups(void)
{
ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
-
- /* Fixup for 64M flash on Rev A boards. */
- if (bd.bi_flashsize == 0x4000000) {
- void *devp;
- u32 v[3];
-
- devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
- if (!devp)
- return;
-
- /* Fixup the size */
- if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
- v[2] = bd.bi_flashsize;
- setprop(devp, "reg", v, sizeof(v));
- }
-
- /* Fixup parition offsets */
- warp_fixup_one_nor(0x300000, 0x3f00000);
- warp_fixup_one_nor(0x340000, 0x3f40000);
- warp_fixup_one_nor(0x380000, 0x3f80000);
- }
}
-
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: memory-controller {
- compatible = "ibm,sdram-405exr";
+ compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2";
dcr-reg = <0x010 0x002>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x5 0x4 /* ECC DED Error */
+ 0x6 0x4>; /* ECC SEC Error */
};
MAL0: mcmal {
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: memory-controller {
- compatible = "ibm,sdram-405ex";
+ compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
dcr-reg = <0x010 0x002>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x5 0x4 /* ECC DED Error */
+ 0x6 0x4>; /* ECC SEC Error */
};
MAL0: mcmal {
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: memory-controller {
- compatible = "ibm,sdram-405ex";
+ compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
dcr-reg = <0x010 0x002>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x5 0x4 /* ECC DED Error */
+ 0x6 0x4 /* ECC SEC Error */ >;
};
MAL0: mcmal {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
- compatible = "gianfar", "simple-bus";
+ compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 0x8 36 0x8 35 0x8>;
ramdisk@0 {
reg = <0x0 0x03000000>;
- readl-only;
+ read-only;
};
diagnostic@3000000 {
reg = <0x00000002 0x00004000 0x00000A00>;
};
- nor_flash@0,0 {
+ nor@0,0 {
compatible = "amd,s29gl032a", "cfi-flash";
bank-width = <2>;
reg = <0x00000000 0x00000000 0x00400000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ partition@0 {
+ label = "splash";
+ reg = <0x00000000 0x00020000>;
+ };
partition@300000 {
label = "fpga";
reg = <0x0300000 0x00040000>;
reg = <0x0380000 0x00080000>;
};
};
+
+ ndfc@1,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000001 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x03E00000>;
+ };
+ partition@40000000 {
+ label = "persistent";
+ reg = <0x04000000 0x04000000>;
+ };
+ partition@80000000 {
+ label = "persistent1";
+ reg = <0x08000000 0x04000000>;
+ };
+ partition@C0000000 {
+ label = "persistent2";
+ reg = <0x0C000000 0x04000000>;
+ };
+ };
+ };
};
UART0: serial@ef600300 {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:18 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:46 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:20 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:48 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:50 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:23 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:52 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:25 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:53 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 10:49:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:55 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:27 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:57 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:04 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:31 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:06 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:33 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:08 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:35 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:09 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:36 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:11 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:38 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:13 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:41 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:15 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:42 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:45 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:18 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:47 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 10:31:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:49 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Fri Jan 23 07:57:16 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
-CONFIG_MTD_OOPS=m
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_I2C_IBM_IIC is not set
+CONFIG_I2C_IBM_IIC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
+CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# Sonics Silicon Backplane
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_PIKA_WDT=y
+# CONFIG_BOOKE_WDT is not set
+
+#
+# USB-based Watchdog Cards
#
+# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
+CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:49 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:47 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:50 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:48 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND_FSL_UPM is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:51 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:49 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_NAND_FSL_UPM is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:53 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:50 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_QUICC_ENGINE=y
# CONFIG_QE_GPIO is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:54 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:52 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_QUICC_ENGINE=y
# CONFIG_QE_GPIO is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:56 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:53 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x1000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:57 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:55 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:58 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:56 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:59 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:58 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_QUICC_ENGINE=y
# CONFIG_QE_GPIO is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:00 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:01 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:00 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:59 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:01 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:01 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:02 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:02 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:03 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:03 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:05 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:04 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# CONFIG_DVB_FE_CUSTOMISE is not set
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:06 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:05 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:08 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:07 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
CONFIG_FSL_ULI1575=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# CONFIG_DVB_FE_CUSTOMISE is not set
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
#
# Digital terrestrial only tuners/PLL
#
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:09 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:09 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:11 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:10 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Tue Dec 30 11:17:46 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:12 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# CONFIG_DVB_FE_CUSTOMISE is not set
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
#
# Digital terrestrial only tuners/PLL
#
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:14 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:13 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:15 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:17 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:17 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:19 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:18 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:20 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:19 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_HAS_RAPIDIO is not set
#
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:21 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:20 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_HAS_RAPIDIO is not set
#
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:20 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND_FSL_UPM is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:23 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:21 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_HAS_RAPIDIO is not set
#
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:25 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:22 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_HAS_RAPIDIO is not set
#
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:30 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:26 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
CONFIG_GEF_WDT=y
+# CONFIG_8xxx_WDT is not set
#
# PCI-based Watchdog Cards
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:28 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:24 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_ULI1575=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_NAND_FSL_ELBC=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_MPC8610=y
CONFIG_SND_SOC_MPC8610_HPCD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:29 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:25 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_ULI1575=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# CONFIG_DVB_FE_CUSTOMISE is not set
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
#
# Digital terrestrial only tuners/PLL
#
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:40:26 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:23 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:32 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:24 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
#
# Library routines
#
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:34 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:26 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DEBUG_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:27 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPM2=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
#
# Library routines
#
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:37 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:28 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
#
# Library routines
#
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:38 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:29 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_TAU is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffc00000
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
#
# Special HID drivers
#
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:38 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:30 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPM2=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_BRIQ_PANEL is not set
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:39 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:32 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:40 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:33 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:41 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:35 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPM2=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:42 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:36 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_QE_GPIO=y
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND_FSL_UPM is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:43 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:37 2009
#
# CONFIG_PPC64 is not set
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_FSL_ULI1575=y
CONFIG_CPM=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# CONFIG_DVB_FE_CUSTOMISE is not set
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
#
# Digital terrestrial only tuners/PLL
#
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:43 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:38 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:44 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:39 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_ULI1575=y
# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# CONFIG_DVB_FE_CUSTOMISE is not set
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
#
# Digital terrestrial only tuners/PLL
#
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:46 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:41 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
#
# Library routines
#
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 09:54:44 2008
+# Linux kernel version: 2.6.29-rc2
+# Fri Jan 23 08:44:03 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 10:06:19 2008
+# Linux kernel version: 2.6.29-rc2
+# Fri Jan 23 08:43:46 2009
#
# CONFIG_PPC64 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
+CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_440=y
+# CONFIG_KVM_EXIT_TIMING is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_AT24=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
CONFIG_SENSORS_PCA9539=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:47 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:42 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPM2=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:48 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:44 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov 8 12:39:48 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:46 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_TAU is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xFF800000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
#
# USB Network Adapters
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
struct vio_dev *viodev = to_vio_dev(dev);
void *ret;
- if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+ if (vio_cmo_alloc(viodev, roundup(size, PAGE_SIZE))) {
atomic_inc(&viodev->cmo.allocs_failed);
return NULL;
}
ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
if (unlikely(ret == NULL)) {
- vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+ vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
atomic_inc(&viodev->cmo.allocs_failed);
}
dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
- vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+ vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
}
static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page,
if (unlikely(!ret)) {
vio_cmo_dealloc(viodev, alloc_size);
atomic_inc(&viodev->cmo.allocs_failed);
+ return ret;
}
for (sgl = sglist, count = 0; count < ret; count++, sgl++)
int wimgxpp;
struct ppc_bat *bat = BATS[index];
- if (((flags & _PAGE_NO_CACHE) == 0) &&
- cpu_has_feature(CPU_FTR_NEED_COHERENT))
- flags |= _PAGE_COHERENT;
+ if ((flags & _PAGE_NO_CACHE) ||
+ (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0))
+ flags &= ~_PAGE_COHERENT;
bl = (size >> 17) - 1;
if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
-obj-$(CONFIG_WARP) += warp-nand.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+++ /dev/null
-/*
- * PIKA Warp(tm) NAND flash specific routines
- *
- * Copyright (c) 2008 PIKA Technologies
- * Sean MacLennan <smaclennan@pikatech.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/of.h>
-#include <asm/machdep.h>
-
-
-#ifdef CONFIG_MTD_NAND_NDFC
-
-#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */
-
-#define WARP_NAND_FLASH_REG_ADDR 0xD0000000UL
-#define WARP_NAND_FLASH_REG_SIZE 0x2000
-
-static struct resource warp_ndfc = {
- .start = WARP_NAND_FLASH_REG_ADDR,
- .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct mtd_partition nand_parts[] = {
- {
- .name = "kernel",
- .offset = 0,
- .size = 0x0200000
- },
- {
- .name = "root",
- .offset = 0x0200000,
- .size = 0x3E00000
- },
- {
- .name = "persistent",
- .offset = 0x4000000,
- .size = 0x4000000
- },
- {
- .name = "persistent1",
- .offset = 0x8000000,
- .size = 0x4000000
- },
- {
- .name = "persistent2",
- .offset = 0xC000000,
- .size = 0x4000000
- }
-};
-
-struct ndfc_controller_settings warp_ndfc_settings = {
- .ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1),
- .ndfc_erpn = 0,
-};
-
-static struct ndfc_chip_settings warp_chip0_settings = {
- .bank_settings = 0x80002222,
-};
-
-struct platform_nand_ctrl warp_nand_ctrl = {
- .priv = &warp_ndfc_settings,
-};
-
-static struct platform_device warp_ndfc_device = {
- .name = "ndfc-nand",
- .id = 0,
- .dev = {
- .platform_data = &warp_nand_ctrl,
- },
- .num_resources = 1,
- .resource = &warp_ndfc,
-};
-
-/* Do NOT set the ecclayout: let it default so it is correct for both
- * 64M and 256M flash chips.
- */
-static struct platform_nand_chip warp_nand_chip0 = {
- .nr_chips = 1,
- .chip_offset = CS_NAND_0,
- .nr_partitions = ARRAY_SIZE(nand_parts),
- .partitions = nand_parts,
- .chip_delay = 20,
- .priv = &warp_chip0_settings,
-};
-
-static struct platform_device warp_nand_device = {
- .name = "ndfc-chip",
- .id = 0,
- .num_resources = 0,
- .dev = {
- .platform_data = &warp_nand_chip0,
- .parent = &warp_ndfc_device.dev,
- }
-};
-
-static int warp_setup_nand_flash(void)
-{
- struct device_node *np;
-
- /* Try to detect a rev A based on NOR size. */
- np = of_find_compatible_node(NULL, NULL, "cfi-flash");
- if (np) {
- struct property *pp;
-
- pp = of_find_property(np, "reg", NULL);
- if (pp && (pp->length == 12)) {
- u32 *v = pp->value;
- if (v[2] == 0x4000000) {
- /* Rev A = 64M NAND */
- warp_nand_chip0.nr_partitions = 3;
-
- nand_parts[1].size = 0x3000000;
- nand_parts[2].offset = 0x3200000;
- nand_parts[2].size = 0x0e00000;
- }
- }
- of_node_put(np);
- }
-
- platform_device_register(&warp_ndfc_device);
- platform_device_register(&warp_nand_device);
-
- return 0;
-}
-machine_device_initcall(warp, warp_setup_nand_flash);
-
-#endif
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus" },
+ { .compatible = "gianfar" },
{},
};
ph->first_offset_section);
printk(KERN_INFO "dump disk sections should be zero\n");
printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
- printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
- printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+ printk(KERN_INFO "block num = %lld\n", ph->block_num_dd);
+ printk(KERN_INFO "number of blocks = %lld\n", ph->num_of_blocks_dd);
printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
- printk(KERN_INFO "cpu source_address =%lx\n",
+ printk(KERN_INFO "cpu source_address =%llx\n",
ph->cpu_data.source_address);
- printk(KERN_INFO "cpu source_length =%lx\n",
+ printk(KERN_INFO "cpu source_length =%llx\n",
ph->cpu_data.source_length);
- printk(KERN_INFO "cpu length_copied =%lx\n",
+ printk(KERN_INFO "cpu length_copied =%llx\n",
ph->cpu_data.length_copied);
printk(KERN_INFO " HPTE AREA \n");
printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
- printk(KERN_INFO "HPTE source_address =%lx\n",
+ printk(KERN_INFO "HPTE source_address =%llx\n",
ph->hpte_data.source_address);
- printk(KERN_INFO "HPTE source_length =%lx\n",
+ printk(KERN_INFO "HPTE source_length =%llx\n",
ph->hpte_data.source_length);
- printk(KERN_INFO "HPTE length_copied =%lx\n",
+ printk(KERN_INFO "HPTE length_copied =%llx\n",
ph->hpte_data.length_copied);
printk(KERN_INFO " SRSD AREA \n");
printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
- printk(KERN_INFO "SRSD source_address =%lx\n",
+ printk(KERN_INFO "SRSD source_address =%llx\n",
ph->kernel_data.source_address);
- printk(KERN_INFO "SRSD source_length =%lx\n",
+ printk(KERN_INFO "SRSD source_length =%llx\n",
ph->kernel_data.source_length);
- printk(KERN_INFO "SRSD length_copied =%lx\n",
+ printk(KERN_INFO "SRSD length_copied =%llx\n",
ph->kernel_data.length_copied);
#endif
}
/* total reserved size - start of scratch area */
second_addr_range = phyp_dump_info->init_reserve_size -
phyp_dump_info->reserved_scratch_size;
- return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
- " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+ return sprintf(buf, "CPU:0x%llx-0x%llx: HPTE:0x%llx-0x%llx:"
+ " DUMP:0x%llx-0x%llx, 0x%lx-0x%llx:\n",
phdr.cpu_data.destination_address,
phdr.cpu_data.length_copied,
phdr.hpte_data.destination_address,
#ifndef __s390x__
#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
#else /* __s390x__ */
-#define SET_PERSONALITY(ex) \
-do { \
- if (current->personality != PER_LINUX32) \
- set_personality(PER_LINUX); \
- if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
- set_thread_flag(TIF_31BIT); \
- else \
- clear_thread_flag(TIF_31BIT); \
+#define SET_PERSONALITY(ex) \
+do { \
+ if (personality(current->personality) != PER_LINUX32) \
+ set_personality(PER_LINUX); \
+ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ set_thread_flag(TIF_31BIT); \
+ else \
+ clear_thread_flag(TIF_31BIT); \
} while (0)
#endif /* __s390x__ */
sys_epoll_create1_wrapper:
lgfr %r2,%r2 # int
jg sys_epoll_create1 # branch to system call
+
+ .globl sys32_readahead_wrapper
+sys32_readahead_wrapper:
+ lgfr %r2,%r2 # int
+ llgfr %r3,%r3 # u32
+ llgfr %r4,%r4 # u32
+ lgfr %r5,%r5 # s32
+ jg sys32_readahead # branch to system call
+
+ .globl sys32_sendfile64_wrapper
+sys32_sendfile64_wrapper:
+ lgfr %r2,%r2 # int
+ lgfr %r3,%r3 # int
+ llgtr %r4,%r4 # compat_loff_t *
+ lgfr %r5,%r5 # s32
+ jg sys32_sendfile64 # branch to system call
+
+ .globl sys_tkill_wrapper
+sys_tkill_wrapper:
+ lgfr %r2,%r2 # pid_t
+ lgfr %r3,%r3 # int
+ jg sys_tkill # branch to system call
+
+ .globl sys_tgkill_wrapper
+sys_tgkill_wrapper:
+ lgfr %r2,%r2 # pid_t
+ lgfr %r3,%r3 # pid_t
+ lgfr %r4,%r4 # int
+ jg sys_tgkill # branch to system call
+
+ .globl compat_sys_keyctl_wrapper
+compat_sys_keyctl_wrapper:
+ llgfr %r2,%r2 # u32
+ llgfr %r3,%r3 # u32
+ llgfr %r4,%r4 # u32
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_keyctl # branch to system call
SYSCALL(sys_getcwd,sys_getcwd,sys32_getcwd_wrapper)
SYSCALL(sys_capget,sys_capget,sys32_capget_wrapper)
SYSCALL(sys_capset,sys_capset,sys32_capset_wrapper) /* 185 */
-SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack)
+SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack_wrapper)
SYSCALL(sys_sendfile,sys_sendfile64,sys32_sendfile_wrapper)
NI_SYSCALL /* streams1 */
NI_SYSCALL /* streams2 */
SYSCALL(sys_madvise,sys_madvise,sys32_madvise_wrapper)
SYSCALL(sys_getdents64,sys_getdents64,sys32_getdents64_wrapper) /* 220 */
SYSCALL(sys_fcntl64,sys_ni_syscall,compat_sys_fcntl64_wrapper)
-SYSCALL(sys_readahead,sys_readahead,sys32_readahead)
-SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64)
+SYSCALL(sys_readahead,sys_readahead,sys32_readahead_wrapper)
+SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64_wrapper)
SYSCALL(sys_setxattr,sys_setxattr,sys32_setxattr_wrapper)
SYSCALL(sys_lsetxattr,sys_lsetxattr,sys32_lsetxattr_wrapper) /* 225 */
SYSCALL(sys_fsetxattr,sys_fsetxattr,sys32_fsetxattr_wrapper)
SYSCALL(sys_lremovexattr,sys_lremovexattr,sys32_lremovexattr_wrapper)
SYSCALL(sys_fremovexattr,sys_fremovexattr,sys32_fremovexattr_wrapper) /* 235 */
SYSCALL(sys_gettid,sys_gettid,sys_gettid)
-SYSCALL(sys_tkill,sys_tkill,sys_tkill)
+SYSCALL(sys_tkill,sys_tkill,sys_tkill_wrapper)
SYSCALL(sys_futex,sys_futex,compat_sys_futex_wrapper)
SYSCALL(sys_sched_setaffinity,sys_sched_setaffinity,sys32_sched_setaffinity_wrapper)
SYSCALL(sys_sched_getaffinity,sys_sched_getaffinity,sys32_sched_getaffinity_wrapper) /* 240 */
-SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill)
+SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill_wrapper)
NI_SYSCALL /* reserved for TUX */
SYSCALL(sys_io_setup,sys_io_setup,sys32_io_setup_wrapper)
SYSCALL(sys_io_destroy,sys_io_destroy,sys32_io_destroy_wrapper)
SYSCALL(sys_kexec_load,sys_kexec_load,compat_sys_kexec_load_wrapper)
SYSCALL(sys_add_key,sys_add_key,compat_sys_add_key_wrapper)
SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper)
-SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl) /* 280 */
+SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl_wrapper) /* 280 */
SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper)
SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
static void __init time_init_wq(void)
{
- if (!time_sync_wq)
- time_sync_wq = create_singlethread_workqueue("timesync");
+ if (time_sync_wq)
+ return;
+ time_sync_wq = create_singlethread_workqueue("timesync");
+ stop_machine_create();
}
/*
*/
void init_cpu_vtimer(void)
{
+ struct thread_info *ti = current_thread_info();
struct vtimer_queue *vq;
+ S390_lowcore.user_timer = ti->user_timer;
+ S390_lowcore.system_timer = ti->system_timer;
+
/* kick the virtual timer */
asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
menu "Bus options"
-# Even on SuperH devices which don't have an ISA bus,
-# this variable helps the PCMCIA modules handle
-# IRQ requesting properly -- Greg Banks.
-#
-# Though we're generally not interested in it when
-# we're not using PCMCIA, so we make it dependent on
-# PCMCIA outright. -- PFM.
-config ISA
- def_bool y
- depends on PCMCIA && HD6446X_SERIES
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
-
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-config MCA
- bool
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-config SBUS
- bool
-
config SUPERHYWAY
tristate "SuperHyway Bus support"
depends on CPU_SUBTYPE_SH4_202
config MAPLE
- bool "Maple Bus support"
- depends on SH_DREAMCAST
- help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
+ bool "Maple Bus support"
+ depends on SH_DREAMCAST
+ help
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
source "arch/sh/drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
#include <linux/mtd/sh_flctl.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/clock.h>
#include <cpu/sh7723.h>
-static struct smc911x_platdata smc911x_info = {
- .flags = SMC911X_USE_32BIT,
- .irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
};
-static struct resource smc9118_resources[] = {
+static struct resource smsc9118_resources[] = {
[0] = {
.start = 0xb6080000,
.end = 0xb60fffff,
}
};
-static struct platform_device smc9118_device = {
- .name = "smc911x",
+static struct platform_device smsc9118_device = {
+ .name = "smsc911x",
.id = -1,
- .num_resources = ARRAY_SIZE(smc9118_resources),
- .resource = smc9118_resources,
+ .num_resources = ARRAY_SIZE(smsc9118_resources),
+ .resource = smsc9118_resources,
.dev = {
- .platform_data = &smc911x_info,
+ .platform_data = &smsc911x_config,
},
};
},
};
+struct spi_gpio_platform_data sdcard_cn3_platform_data = {
+ .sck = GPIO_PTD0,
+ .mosi = GPIO_PTD1,
+ .miso = GPIO_PTD2,
+ .num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn3_device = {
+ .name = "spi_gpio",
+ .dev = {
+ .platform_data = &sdcard_cn3_platform_data,
+ },
+};
+
static struct platform_device *ap325rxa_devices[] __initdata = {
- &smc9118_device,
+ &smsc9118_device,
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
&camera_device,
#endif
&nand_flash_device,
+ &sdcard_cn3_device,
};
static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
},
};
+static struct spi_board_info ap325rxa_spi_devices[] = {
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 5000000,
+ .chip_select = 0,
+ .controller_data = (void *) GPIO_PTD5,
+ },
+};
+
static int __init ap325rxa_devices_setup(void)
{
/* LD3 and LD4 LEDs */
i2c_register_board_info(0, ap325rxa_i2c_devices,
ARRAY_SIZE(ap325rxa_i2c_devices));
+ spi_register_board_info(ap325rxa_spi_devices,
+ ARRAY_SIZE(ap325rxa_spi_devices));
+
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/smsc911x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
printk(KERN_WARNING "Ethernet not ready\n");
}
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
[0] = {
.start = 0xa8000000,
.end = 0xabffffff,
},
};
-static struct platform_device smc911x_device = {
- .name = "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
.id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
};
static struct resource heartbeat_resources[] = {
static struct platform_device *mpr2_devices[] __initdata = {
&heartbeat_device,
- &smc911x_device,
+ &smsc911x_device,
&flash_device,
};
#include <linux/i2c.h>
#include <linux/i2c-pca-platform.h>
#include <linux/i2c-algo-pca.h>
+#include <linux/irq.h>
#include <asm/heartbeat.h>
#include <mach/sh7785lcr.h>
#include <linux/ata_platform.h>
#include <linux/types.h>
#include <linux/i2c.h>
+#include <linux/irq.h>
#include <net/ax88796.h>
#include <asm/machvec.h>
#include <mach/highlander.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/irq.h>
#include <asm/hd64461.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include <mach/hp6xx.h>
#include <cpu/dac.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/ov772x.h>
+#include <media/tw9910.h>
#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
};
static struct clk *camera_clk;
+static DEFINE_MUTEX(camera_lock);
-static void camera_power_on(void)
+static void camera_power_on(int is_tw)
{
+ mutex_lock(&camera_lock);
+
/* Use 10 MHz VIO_CKO instead of 24 MHz to work
* around signal quality issues on Panel Board V2.1.
*/
/* use VIO_RST to take camera out of reset */
mdelay(10);
+ if (is_tw) {
+ gpio_set_value(GPIO_PTT2, 0);
+ gpio_set_value(GPIO_PTT0, 0);
+ } else {
+ gpio_set_value(GPIO_PTT0, 1);
+ }
gpio_set_value(GPIO_PTT3, 0);
mdelay(10);
gpio_set_value(GPIO_PTT3, 1);
clk_put(camera_clk);
gpio_set_value(GPIO_PTT3, 0);
+ mutex_unlock(&camera_lock);
}
-static void camera_power(int mode)
+static int ov7725_power(struct device *dev, int mode)
{
if (mode)
- camera_power_on();
+ camera_power_on(0);
else
camera_power_off();
-}
-#ifdef CONFIG_I2C
-static unsigned char camera_ov772x_magic[] =
-{
- 0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
- 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
- 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
- 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
- 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
- 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
- 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
- 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
- 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
- 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
- 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
- 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
- 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
- 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
- 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
- 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
- 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
- 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
- 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
- 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
- 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
- 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
- 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
- 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
- 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
- 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
- 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
- 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
- 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
- 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
- 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
- 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
- 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
- 0x2c, 0x78,
-};
+ return 0;
+}
-static int ov772x_set_capture(struct soc_camera_platform_info *info,
- int enable)
+static int tw9910_power(struct device *dev, int mode)
{
- struct i2c_adapter *a = i2c_get_adapter(0);
- struct i2c_msg msg;
- int ret = 0;
- int i;
-
- if (!enable)
- return 0; /* camera_power_off() is enough */
-
- for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
- u_int8_t buf[8];
-
- msg.addr = 0x21;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
-
- buf[0] = camera_ov772x_magic[i];
- buf[1] = camera_ov772x_magic[i + 1];
-
- ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
- }
+ if (mode)
+ camera_power_on(1);
+ else
+ camera_power_off();
- return ret;
+ return 0;
}
-static struct soc_camera_platform_info ov772x_info = {
- .iface = 0,
- .format_name = "RGB565",
- .format_depth = 16,
- .format = {
- .pixelformat = V4L2_PIX_FMT_RGB565,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .width = 320,
- .height = 240,
- },
- .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
- .power = camera_power,
- .set_capture = ov772x_set_capture,
-};
-
-static struct platform_device migor_camera_device = {
- .name = "soc_camera_platform",
- .dev = {
- .platform_data = &ov772x_info,
- },
-};
-#endif /* CONFIG_I2C */
-
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
},
};
+static struct ov772x_camera_info ov7725_info = {
+ .buswidth = SOCAM_DATAWIDTH_8,
+ .link = {
+ .power = ov7725_power,
+ },
+};
+
+static struct tw9910_video_info tw9910_info = {
+ .buswidth = SOCAM_DATAWIDTH_8,
+ .mpout = TW9910_MPO_FIELD,
+ .link = {
+ .power = tw9910_power,
+ }
+};
+
+struct spi_gpio_platform_data sdcard_cn9_platform_data = {
+ .sck = GPIO_PTD0,
+ .mosi = GPIO_PTD1,
+ .miso = GPIO_PTD2,
+ .num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn9_device = {
+ .name = "spi_gpio",
+ .dev = {
+ .platform_data = &sdcard_cn9_platform_data,
+ },
+};
+
static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
&sh_keysc_device,
&migor_lcdc_device,
&migor_ceu_device,
-#ifdef CONFIG_I2C
- &migor_camera_device,
-#endif
&migor_nor_flash_device,
&migor_nand_flash_device,
+ &sdcard_cn9_device,
};
static struct i2c_board_info migor_i2c_devices[] = {
I2C_BOARD_INFO("migor_ts", 0x51),
.irq = 38, /* IRQ6 */
},
+ {
+ I2C_BOARD_INFO("ov772x", 0x21),
+ .platform_data = &ov7725_info,
+ },
+ {
+ I2C_BOARD_INFO("tw9910", 0x45),
+ .platform_data = &tw9910_info,
+ },
+};
+
+static struct spi_board_info migor_spi_devices[] = {
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 5000000,
+ .chip_select = 0,
+ .controller_data = (void *) GPIO_PTD5,
+ },
};
static int __init migor_devices_setup(void)
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
+ spi_register_board_info(migor_spi_devices,
+ ARRAY_SIZE(migor_spi_devices));
+
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
__initcall(migor_devices_setup);
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <cpu/sh7203.h>
-static struct smc911x_platdata smc911x_info = {
- .flags = SMC911X_USE_16BIT,
- .irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_16BIT,
};
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
[0] = {
.start = 0x24000000,
.end = 0x24000000 + 0x100,
},
};
-static struct platform_device smc911x_device = {
- .name = "smc911x",
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
.id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
.dev = {
- .platform_data = &smc911x_info,
+ .platform_data = &smsc911x_config,
},
};
};
static struct platform_device *rsk7203_devices[] __initdata = {
- &smc911x_device,
+ &smsc911x_device,
&led_device,
};
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/smc91x.h>
+#include <linux/irq.h>
#include <asm/ilsel.h>
static struct resource heartbeat_resources[] = {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 18:20:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 16:54:19 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
# CONFIG_DMADEVICES is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:18:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 16:54:55 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Wed Dec 17 13:53:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 16:55:29 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_NLS is not set
#
#
# Library routines
#
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:20:09 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 16:55:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_SH7760 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
#
# SoC Audio support for SuperH
#
+CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:23:53 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 16:56:55 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_SYS_SUPPORTS_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_FREEZER=y
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
CONFIG_HD6446X_SERIES=y
CONFIG_HD64461=y
-# CONFIG_HD64465 is not set
CONFIG_HD64461_IRQ=36
CONFIG_HD64461_IOBASE=0xb0000000
CONFIG_HD64461_ENABLER=y
#
# Bus options
#
-CONFIG_ISA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
#
# PC-card bridges
#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
#
# Executable file formats
#
# Power management options (EXPERIMENTAL)
#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
+# CONFIG_CPU_IDLE is not set
# CONFIG_NET is not set
#
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
# CONFIG_PHONE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SH_MOBILE_LCDC=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:25:51 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 16:58:46 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:29:42 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:02:46 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:32:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:03:37 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-CONFIG_SH_KGDB=y
-
-#
-# KGDB configuration options
-#
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
# CONFIG_MORE_COMPILE_OPTIONS is not set
-# CONFIG_KGDB_NMI is not set
-CONFIG_KGDB_SYSRQ=y
-
-#
-# Serial port setup
-#
-CONFIG_KGDB_DEFPORT=0
-CONFIG_KGDB_DEFBAUD=115200
-CONFIG_KGDB_DEFPARITY_N=y
-# CONFIG_KGDB_DEFPARITY_E is not set
-# CONFIG_KGDB_DEFPARITY_O is not set
-CONFIG_KGDB_DEFBITS_8=y
-# CONFIG_KGDB_DEFBITS_7 is not set
#
# Security options
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:37:41 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:06:47 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Oct 31 15:58:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:09:35 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4AL_DSP=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 20:03:46 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:10:19 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 16:25:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:14:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_HIGHLANDER=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_4KSTACKS=y
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec 8 14:48:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:19:04 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
#
# Tracers
#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec 8 14:35:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:20:31 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
#
# Tracers
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:44:36 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:23:15 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:47:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:26:10 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:53:22 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:26:40 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:57:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:31:27 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
# CONFIG_GENERIC_TIME is not set
# CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH2=y
CONFIG_CPU_SH2A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
CONFIG_BINFMT_SHARED_FLAT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_93CX6=y
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Thu Dec 4 16:40:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:33:53 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DAB is not set
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:03:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:36:46 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
# CONFIG_GENERIC_TIME is not set
# CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH2=y
CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
# CONFIG_NET is not set
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:04:52 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:37:50 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_STNIC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:08:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:40:12 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_SH_ETH=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:12:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:43:33 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:15:10 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:46:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4AL_DSP=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:17:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:49:22 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_STNIC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_SH_WDT=y
# CONFIG_SH_WDT_MMAP is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:21:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:51:47 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SH_WDT is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:27:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:53:50 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
#
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:31:54 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 17:56:46 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
#
# Bus options
#
-CONFIG_CF_ENABLER=y
-CONFIG_CF_AREA5=y
-# CONFIG_CF_AREA6 is not set
-CONFIG_CF_BASE_ADDR=0xb4000000
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:35:18 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:00:31 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
#
# Classification
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SH_ETH is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:37:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:02:28 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_SH_ETH=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB_SH7760=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:49:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:05:18 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:52:59 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:09:00 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:16:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:10:57 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_LOCKBREAK=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
CONFIG_FREEZER=y
#
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
#
# Boot options
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
CONFIG_SMC91X=y
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:55:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:14:08 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:56:48 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:15:56 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
# CONFIG_NET is not set
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:58:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:17:19 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 17:35:17 2008
+# Linux kernel version: 2.6.28
+# Fri Jan 9 18:22:53 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_CPU_SH4AL_DSP=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
CONFIG_MAC80211=y
#
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
#
# Security options
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* __ASM_SH_POSIX_TYPES_H */
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* __ASM_SH64_POSIX_TYPES_H */
.num_resources = ARRAY_SIZE(veu_resources),
};
+static struct uio_info jpu_platform_data = {
+ .name = "JPU",
+ .version = "0",
+ .irq = 27,
+};
+
+static struct resource jpu_resources[] = {
+ [0] = {
+ .name = "JPU",
+ .start = 0xfea00000,
+ .end = 0xfea102d3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device jpu_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 2,
+ .dev = {
+ .platform_data = &jpu_platform_data,
+ },
+ .resource = jpu_resources,
+ .num_resources = ARRAY_SIZE(jpu_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
&sci_device,
&vpu_device,
&veu_device,
+ &jpu_device,
};
static int __init sh7343_devices_setup(void)
clk_always_enable("xymem0"); /* XYMEM */
clk_always_enable("veu0"); /* VEU */
clk_always_enable("vpu0"); /* VPU */
+ clk_always_enable("jpu0"); /* JPU */
platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+ platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
return platform_add_devices(sh7343_devices,
ARRAY_SIZE(sh7343_devices));
[0] = {
.name = "JPU",
.start = 0xfea00000,
- .end = 0xfea102d0,
+ .end = 0xfea102d3,
.flags = IORESOURCE_MEM,
},
[1] = {
int error;
char *filename;
- lock_kernel();
filename = getname((char __user *)ufilename);
error = PTR_ERR(filename);
if (IS_ERR(filename))
}
putname(filename);
out:
- unlock_kernel();
return error;
}
* - userspace errors just cause EFAULT to be returned, resulting in SEGV
* - kernel/userspace interfaces cause a jump to an appropriate handler
* - other kernel errors are bad
- * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault
*/
-static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
+static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
{
if (!user_mode(regs)) {
const struct exception_table_entry *fixup;
fixup = search_exception_tables(regs->pc);
if (fixup) {
regs->pc = fixup->fixup;
- return 0;
+ return;
}
die(str, regs, err);
}
- return -EFAULT;
}
static inline void sign_extend(unsigned int count, unsigned char *dst)
/* Argh. Address not only misaligned but also non-existent.
* Raise an EFAULT and see if it's trapped
*/
- return die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+ die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+ return -EFAULT;
}
/*
* Ok, go for it..
*/
area = get_vm_area(size, VM_IOREMAP);
- pr_debug("Get vm_area returns %p addr %p\n",area,area->addr);
if (!area)
return NULL;
+ pr_debug("Get vm_area returns %p addr %p\n", area, area->addr);
area->phys_addr = phys_addr;
addr = area->addr;
if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
select HAVE_KRETPROBES
select HAVE_KPROBES
select HAVE_LMB
+ select HAVE_SYSCALL_WRAPPERS
select USE_GENERIC_SMP_HELPERS if SMP
select RTC_DRV_CMOS
select RTC_DRV_BQ4802
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-clockboard-leds";
+ p->leds_pdev.id = -1;
p->leds_pdev.resource = &p->leds_resource;
p->leds_pdev.num_resources = 1;
p->leds_pdev.dev.parent = &op->dev;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-fhc-leds";
+ p->leds_pdev.id = p->board_num;
p->leds_pdev.resource = &p->leds_resource;
p->leds_pdev.num_resources = 1;
p->leds_pdev.dev.parent = &op->dev;
static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
{
+ const struct manufacturer_info *manuf;
+ int i;
+
sparc_cpu_type = NULL;
sparc_fpu_type = NULL;
- if (psr_impl < ARRAY_SIZE(manufacturer_info))
+ manuf = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
+ {
+ if (psr_impl == manufacturer_info[i].psr_impl) {
+ manuf = &manufacturer_info[i];
+ break;
+ }
+ }
+ if (manuf != NULL)
{
const struct cpu_info *cpu;
const struct fpu_info *fpu;
- cpu = &manufacturer_info[psr_impl].cpu_info[0];
+ cpu = &manuf->cpu_info[0];
while (cpu->psr_vers != -1)
{
if (cpu->psr_vers == psr_vers) {
}
cpu++;
}
- fpu = &manufacturer_info[psr_impl].fpu_info[0];
+ fpu = &manuf->fpu_info[0];
while (fpu->fp_vers != -1)
{
if (fpu->fp_vers == fpu_vers) {
}
}
-asmlinkage unsigned long sparc_brk(unsigned long brk)
+SYSCALL_DEFINE1(sparc_brk, unsigned long, brk)
{
/* People could try to be nasty and use ta 0x6d in 32bit programs */
if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32)
* sys_pipe() is the normal C calling standard for creating
* a pipe. It's not the way unix traditionally does this, though.
*/
-asmlinkage long sparc_pipe(struct pt_regs *regs)
+SYSCALL_DEFINE1(sparc_pipe_real, struct pt_regs *, regs)
{
int fd[2];
int error;
* This is really horribly ugly.
*/
-asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
- unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+ unsigned long, third, void __user *, ptr, long, fifth)
{
long err;
return err;
}
-asmlinkage long sparc64_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
{
int ret = sys_newuname(name);
return ret;
}
-asmlinkage long sparc64_personality(unsigned long personality)
+SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
{
int ret;
}
/* Linux version of mmap */
-asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags, unsigned long fd,
- unsigned long off)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, off)
{
struct file * file = NULL;
unsigned long retval = -EBADF;
return retval;
}
-asmlinkage long sys64_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len)
{
long ret;
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr);
-asmlinkage unsigned long sys64_mremap(unsigned long addr,
- unsigned long old_len, unsigned long new_len,
- unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(64_mremap, unsigned long, addr, unsigned long, old_len,
+ unsigned long, new_len, unsigned long, flags,
+ unsigned long, new_addr)
{
unsigned long ret = -EINVAL;
extern void check_pending(int signum);
-asmlinkage long sys_getdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len)
{
int nlen, err;
return err;
}
-asmlinkage long sys_utrap_install(utrap_entry_t type,
- utrap_handler_t new_p,
- utrap_handler_t new_d,
- utrap_handler_t __user *old_p,
- utrap_handler_t __user *old_d)
+SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type,
+ utrap_handler_t, new_p, utrap_handler_t, new_d,
+ utrap_handler_t __user *, old_p,
+ utrap_handler_t __user *, old_d)
{
if (type < UT_INSTRUCTION_EXCEPTION || type > UT_TRAP_INSTRUCTION_31)
return -EINVAL;
return 0;
}
-asmlinkage long sys_rt_sigaction(int sig,
- const struct sigaction __user *act,
- struct sigaction __user *oact,
- void __user *restorer,
- size_t sigsetsize)
+SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+ struct sigaction __user *, oact, void __user *, restorer,
+ size_t, sigsetsize)
{
struct k_sigaction new_ka, old_ka;
int ret;
reset_pic();
}
-asmlinkage long sys_perfctr(int opcode, unsigned long arg0, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0,
+ unsigned long, arg1, unsigned long, arg2)
{
int err = 0;
.align 32
sys_sparc_pipe:
- ba,pt %xcc, sparc_pipe
+ ba,pt %xcc, sys_sparc_pipe_real
add %sp, PTREGS_OFF, %o0
sys_nis_syscall:
ba,pt %xcc, c_sys_nis_syscall
void __user *ptr, long fifth);
extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
extern asmlinkage long sparc64_personality(unsigned long personality);
-extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long off);
extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
unsigned long old_len,
/*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
/*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
/*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/ .word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*15*/ .word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek
/*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
/*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
/*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
/*170*/ .word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
/*180*/ .word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
- .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname
-/*190*/ .word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
+ .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+/*190*/ .word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
/*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
.word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
/*0*/ .word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
/*5*/ .word sys_open, sys_close, sys_wait4, sys_creat, sys_link
/*10*/ .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/ .word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
+/*15*/ .word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek
/*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
/*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
/*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
/*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize
.word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall
-/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect
+/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect
.word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups
/*80*/ .word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall
.word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall
/*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
/*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
- .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname
-/*190*/ .word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
+ .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+/*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
/*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
.word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
/*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
.word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/ .word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
.word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
/*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
/* arch/sparc64/kernel/traps.c
*
- * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
*/
return;
if (regs->tstate & TSTATE_PRIV) {
+ /* Test if this comes from uaccess places. */
+ const struct exception_table_entry *entry;
+
+ entry = search_exception_tables(regs->tpc);
+ if (entry) {
+ /* Ouch, somebody is trying VM hole tricks on us... */
+#ifdef DEBUG_EXCEPTIONS
+ printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
+ printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
+ regs->tpc, entry->fixup);
+#endif
+ regs->tpc = entry->fixup;
+ regs->tnpc = regs->tpc + 4;
+ return;
+ }
printk("sun4v_data_access_exception: ADDR[%016lx] "
"CTX[%04x] TYPE[%04x], going.\n",
addr, ctx, type);
lib-y += rwsem_$(BITS).o
lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o
-lib-$(CONFIG_SPARC64) += PeeCeeI.o copy_page.o clear_page.o bzero.o
+lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o
lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o
lib-$(CONFIG_SPARC64) += VISsave.o
lib-$(CONFIG_SPARC64) += bitops.o
obj-y += iomap.o
obj-$(CONFIG_SPARC32) += atomic32.o
obj-y += ksyms.o
+obj-$(CONFIG_SPARC64) += PeeCeeI.o
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
/*
* Copyright 1992, Linus Torvalds.
+ *
+ * Note: inlines with more than a single statement should be marked
+ * __always_inline to avoid problems with older gcc's inlining heuristics.
*/
#ifndef _LINUX_BITOPS_H
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
+static __always_inline void
+set_bit(unsigned int nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "orb %1,%0"
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
-static inline void clear_bit(int nr, volatile unsigned long *addr)
+static __always_inline void
+clear_bit(int nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "andb %1,%0"
*
* This is the same as test_and_set_bit on x86.
*/
-static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+static __always_inline int
+test_and_set_bit_lock(int nr, volatile unsigned long *addr)
{
return test_and_set_bit(nr, addr);
}
return oldbit;
}
-static inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
+static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
{
return ((1UL << (nr % BITS_PER_LONG)) &
(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
* A boot-time mapping is currently limited to at most 16 pages.
*/
extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
extern void early_ioremap_reset(void);
extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
#define MSR_IA32_THERM_STATUS 0x0000019c
#define MSR_IA32_MISC_ENABLE 0x000001a0
+/* MISC_ENABLE bits: architectural */
+#define MSR_IA32_MISC_ENABLE_FAST_STRING (1ULL << 0)
+#define MSR_IA32_MISC_ENABLE_TCC (1ULL << 1)
+#define MSR_IA32_MISC_ENABLE_EMON (1ULL << 7)
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL (1ULL << 11)
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL (1ULL << 12)
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP (1ULL << 16)
+#define MSR_IA32_MISC_ENABLE_MWAIT (1ULL << 18)
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID (1ULL << 22)
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE (1ULL << 23)
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE (1ULL << 34)
+
+/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT (1ULL << 2)
+#define MSR_IA32_MISC_ENABLE_TM1 (1ULL << 3)
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE (1ULL << 4)
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE (1ULL << 6)
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK (1ULL << 8)
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE (1ULL << 9)
+#define MSR_IA32_MISC_ENABLE_FERR (1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX (1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_TM2 (1ULL << 13)
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE (1ULL << 19)
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK (1ULL << 20)
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT (1ULL << 24)
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE (1ULL << 37)
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38)
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39)
+
/* Intel Model 6 */
#define MSR_P6_EVNTSEL0 0x00000186
#define MSR_P6_EVNTSEL1 0x00000187
static inline void pte_free(struct mm_struct *mm, struct page *pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
struct old_sigaction __user *);
asmlinkage int sys_sigaltstack(unsigned long);
asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(struct pt_regs);
+asmlinkage int sys_rt_sigreturn(unsigned long);
/* kernel/ioport.c */
asmlinkage long sys_iopl(unsigned long);
-/* x86 architecture timex specifications */
#ifndef _ASM_X86_TIMEX_H
#define _ASM_X86_TIMEX_H
#include <asm/processor.h>
#include <asm/tsc.h>
-#ifdef CONFIG_X86_ELAN
-# define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-#elif defined(CONFIG_X86_RDC321X)
-# define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
-#else
-# define PIT_TICK_RATE 1193182 /* Underlying HZ */
-#endif
-#define CLOCK_TICK_RATE PIT_TICK_RATE
+/* The PIT ticks at this frequency (in HZ): */
+#define PIT_TICK_RATE 1193182
+
+#define CLOCK_TICK_RATE PIT_TICK_RATE
#define ARCH_HAS_READ_CURRENT_TIMER
{
unsigned int value;
+ /* APIC hasn't been mapped yet */
+ if (!apic_phys)
+ return;
+
clear_local_APIC();
/*
num_processors++;
cpu = cpumask_next_zero(-1, cpu_present_mask);
+ if (version != apic_version[boot_cpu_physical_apicid])
+ WARN_ONCE(1,
+ "ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
+ apic_version[boot_cpu_physical_apicid], cpu, version);
+
physid_set(apicid, phys_cpu_present_map);
if (apicid == boot_cpu_physical_apicid) {
/*
struct drv_cmd {
unsigned int type;
- cpumask_var_t mask;
+ const struct cpumask *mask;
drv_addr_union addr;
u32 val;
};
-static void do_drv_read(struct drv_cmd *cmd)
+static long do_drv_read(void *_cmd)
{
+ struct drv_cmd *cmd = _cmd;
u32 h;
switch (cmd->type) {
default:
break;
}
+ return 0;
}
-static void do_drv_write(struct drv_cmd *cmd)
+static long do_drv_write(void *_cmd)
{
+ struct drv_cmd *cmd = _cmd;
u32 lo, hi;
switch (cmd->type) {
default:
break;
}
+ return 0;
}
static void drv_read(struct drv_cmd *cmd)
{
- cpumask_t saved_mask = current->cpus_allowed;
cmd->val = 0;
- set_cpus_allowed_ptr(current, cmd->mask);
- do_drv_read(cmd);
- set_cpus_allowed_ptr(current, &saved_mask);
+ work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
}
static void drv_write(struct drv_cmd *cmd)
{
- cpumask_t saved_mask = current->cpus_allowed;
unsigned int i;
for_each_cpu(i, cmd->mask) {
- set_cpus_allowed_ptr(current, cpumask_of(i));
- do_drv_write(cmd);
+ work_on_cpu(i, do_drv_write, cmd);
}
-
- set_cpus_allowed_ptr(current, &saved_mask);
- return;
}
static u32 get_cur_val(const struct cpumask *mask)
return 0;
}
- cpumask_copy(cmd.mask, mask);
-
+ cmd.mask = mask;
drv_read(&cmd);
dprintk("get_cur_val = %u\n", cmd.val);
return freq;
}
-static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq,
+static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
struct acpi_cpufreq_data *data)
{
unsigned int cur_freq;
return -ENODEV;
}
- if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL)))
- return -ENOMEM;
-
perf = data->acpi_data;
result = cpufreq_frequency_table_target(policy,
data->freq_table,
/* cpufreq holds the hotplug lock, so we are safe from here on */
if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
- cpumask_and(cmd.mask, cpu_online_mask, policy->cpus);
+ cmd.mask = policy->cpus;
else
- cpumask_copy(cmd.mask, cpumask_of(policy->cpu));
+ cmd.mask = cpumask_of(policy->cpu);
freqs.old = perf->states[perf->state].core_frequency * 1000;
freqs.new = data->freq_table[next_state].frequency;
perf->state = next_perf_state;
out:
- free_cpumask_var(cmd.mask);
return result;
}
static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
{
+ /* Unmask CPUID levels if masked: */
+ if (c->x86 == 6 && c->x86_model >= 15) {
+ u64 misc_enable;
+
+ rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+
+ if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
+ misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
+ wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+ c->cpuid_level = cpuid_eax(0);
+ }
+ }
+
if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
struct mtrr_state_type mtrr_state = {};
EXPORT_SYMBOL_GPL(mtrr_state);
-#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "mtrr."
-
-static int mtrr_show;
-module_param_named(show, mtrr_show, bool, 0);
+static int __initdata mtrr_show;
+static int __init mtrr_debug(char *opt)
+{
+ mtrr_show = 1;
+ return 0;
+}
+early_param("mtrr.show", mtrr_debug);
/*
* Returns the effective MTRR type for the region
switch (action & 0xf) {
case CPU_ONLINE:
- INIT_DELAYED_WORK(&work.work, hpet_work);
+ INIT_DELAYED_WORK_ON_STACK(&work.work, hpet_work);
init_completion(&work.complete);
/* FIXME: add schedule_work_on() */
schedule_delayed_work_on(cpu, &work.work, 0);
wait_for_completion(&work.complete);
+ destroy_timer_on_stack(&work.work.timer);
break;
case CPU_DEAD:
if (hdev) {
#ifdef CONFIG_X86_64
/* correctly size the local cpu masks */
-static void setup_cpu_local_masks(void)
+static void __init setup_cpu_local_masks(void)
{
alloc_bootmem_cpumask_var(&cpu_initialized_mask);
alloc_bootmem_cpumask_var(&cpu_callin_mask);
}
#ifdef CONFIG_X86_32
-asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
+/*
+ * Note: do not pass in pt_regs directly as with tail-call optimization
+ * GCC will incorrectly stomp on the caller's frame and corrupt user-space
+ * register state:
+ */
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
{
- return do_rt_sigreturn(®s);
+ struct pt_regs *regs = (struct pt_regs *)&__unused;
+
+ return do_rt_sigreturn(regs);
}
#else /* !CONFIG_X86_32 */
asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
destination_timeouts = 0;
}
}
+ cpu_relax();
}
return FLUSH_COMPLETE;
}
#endif
}
-void vmi_activate(void)
+void __init vmi_activate(void)
{
unsigned long flags;
* that we can fit comfortably.
*
* First we need assembly templates of each of the patchable Guest operations,
- * and these are in lguest_asm.S. */
+ * and these are in i386_head.S. */
/*G:060 We construct a table from the assembler templates: */
static const struct lguest_insns
acpi_ht = 0;
#endif
- /* We set the perferred console to "hvc". This is the "hypervisor
+ /* We set the preferred console to "hvc". This is the "hypervisor
* virtual console" driver written by the PowerPC people, which we also
* adapted for lguest's use. */
add_preferred_console("hvc", 0, NULL);
" jmp 2b\n" \
".previous\n" \
_ASM_EXTABLE(0b,3b) \
- : "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \
+ : "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \
"=&D" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
: "memory"); \
" .align 4\n"
" .long 0b,2b\n"
".previous"
- :"=r" (n), "=D" (s), "=a" (res), "=c" (tmp)
+ :"=&r" (n), "=&D" (s), "=&a" (res), "=&c" (tmp)
:"0" (n), "1" (s), "2" (0), "3" (mask)
:"cc");
return res & mask;
" jmp 2b\n" \
".previous\n" \
_ASM_EXTABLE(0b,3b) \
- : "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \
+ : "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \
"=&D" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
: "memory"); \
".previous\n"
_ASM_EXTABLE(0b,3b)
_ASM_EXTABLE(1b,2b)
- : [size8] "=c"(size), [dst] "=&D" (__d0)
+ : [size8] "=&c"(size), [dst] "=&D" (__d0)
: [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
[zero] "r" (0UL), [eight] "r" (8UL));
return size;
return pte_offset_kernel(pmd, 0);
}
+static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
+ unsigned long vaddr, pte_t *lastpte)
+{
+#ifdef CONFIG_HIGHMEM
+ /*
+ * Something (early fixmap) may already have put a pte
+ * page here, which causes the page table allocation
+ * to become nonlinear. Attempt to fix it, and if it
+ * is still nonlinear then we have to bug.
+ */
+ int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT;
+ int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT;
+
+ if (pmd_idx_kmap_begin != pmd_idx_kmap_end
+ && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
+ && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end
+ && ((__pa(pte) >> PAGE_SHIFT) < table_start
+ || (__pa(pte) >> PAGE_SHIFT) >= table_end)) {
+ pte_t *newpte;
+ int i;
+
+ BUG_ON(after_init_bootmem);
+ newpte = alloc_low_page();
+ for (i = 0; i < PTRS_PER_PTE; i++)
+ set_pte(newpte + i, pte[i]);
+
+ paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT);
+ set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE));
+ BUG_ON(newpte != pte_offset_kernel(pmd, 0));
+ __flush_tlb_all();
+
+ paravirt_release_pte(__pa(pte) >> PAGE_SHIFT);
+ pte = newpte;
+ }
+ BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1)
+ && vaddr > fix_to_virt(FIX_KMAP_END)
+ && lastpte && lastpte + PTRS_PER_PTE != pte);
+#endif
+ return pte;
+}
+
/*
* This function initializes a certain range of kernel virtual memory
* with new bootmem page tables, everywhere page tables are missing in
unsigned long vaddr;
pgd_t *pgd;
pmd_t *pmd;
+ pte_t *pte = NULL;
vaddr = start;
pgd_idx = pgd_index(vaddr);
pmd = pmd + pmd_index(vaddr);
for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);
pmd++, pmd_idx++) {
- one_page_table_init(pmd);
+ pte = page_table_kmap_check(one_page_table_init(pmd),
+ pmd, vaddr, pte);
vaddr += PMD_SIZE;
}
* Fixed mappings, only the page table structure has to be
* created - mappings will be set by set_fixmap():
*/
- early_ioremap_clear();
vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
page_table_range_init(vaddr, end, pgd_base);
tables += PAGE_ALIGN(ptes * sizeof(pte_t));
/* for fixmap */
- tables += PAGE_SIZE * 2;
+ tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t));
/*
* RED-PEN putting page tables only on node 0 could
direct_gbpages = 0;
}
-static unsigned long __init kernel_physical_mapping_init(unsigned long start,
+static unsigned long __meminit kernel_physical_mapping_init(unsigned long start,
unsigned long end,
unsigned long page_size_mask)
{
*/
#include <asm/iomap.h>
+#include <asm/pat.h>
#include <linux/module.h>
/* Map 'pfn' using fixed map 'type' and protections 'prot'
pagefault_disable();
+ /*
+ * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
+ * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
+ * MTRR is UC or WC. UC_MINUS gets the real intention, of the
+ * user, which is "WC if the MTRR is WC, UC if you can't do that."
+ */
+ if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
+ prot = PAGE_KERNEL_UC_MINUS;
+
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
}
}
-void __init early_ioremap_clear(void)
-{
- pmd_t *pmd;
-
- if (early_ioremap_debug)
- printk(KERN_INFO "early_ioremap_clear()\n");
-
- pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
- pmd_clear(pmd);
- paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT);
- __flush_tlb_all();
-}
-
void __init early_ioremap_reset(void)
{
- enum fixed_addresses idx;
- unsigned long addr, phys;
- pte_t *pte;
-
after_paging_init = 1;
- for (idx = FIX_BTMAP_BEGIN; idx >= FIX_BTMAP_END; idx--) {
- addr = fix_to_virt(idx);
- pte = early_ioremap_pte(addr);
- if (pte_present(*pte)) {
- phys = pte_val(*pte) & PAGE_MASK;
- set_fixmap(idx, phys);
- }
- }
}
static void __init __early_set_fixmap(enum fixed_addresses idx,
return 0;
}
+static int __cpa_process_fault(struct cpa_data *cpa, unsigned long vaddr,
+ int primary)
+{
+ /*
+ * Ignore all non primary paths.
+ */
+ if (!primary)
+ return 0;
+
+ /*
+ * Ignore the NULL PTE for kernel identity mapping, as it is expected
+ * to have holes.
+ * Also set numpages to '1' indicating that we processed cpa req for
+ * one virtual address page and its pfn. TBD: numpages can be set based
+ * on the initial value and the level returned by lookup_address().
+ */
+ if (within(vaddr, PAGE_OFFSET,
+ PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))) {
+ cpa->numpages = 1;
+ cpa->pfn = __pa(vaddr) >> PAGE_SHIFT;
+ return 0;
+ } else {
+ WARN(1, KERN_WARNING "CPA: called for zero pte. "
+ "vaddr = %lx cpa->vaddr = %lx\n", vaddr,
+ *cpa->vaddr);
+
+ return -EFAULT;
+ }
+}
+
static int __change_page_attr(struct cpa_data *cpa, int primary)
{
unsigned long address;
repeat:
kpte = lookup_address(address, &level);
if (!kpte)
- return 0;
+ return __cpa_process_fault(cpa, address, primary);
old_pte = *kpte;
- if (!pte_val(old_pte)) {
- if (!primary)
- return 0;
- WARN(1, KERN_WARNING "CPA: called for zero pte. "
- "vaddr = %lx cpa->vaddr = %lx\n", address,
- *cpa->vaddr);
- return -EINVAL;
- }
+ if (!pte_val(old_pte))
+ return __cpa_process_fault(cpa, address, primary);
if (level == PG_LEVEL_4K) {
pte_t new_pte;
vaddr = *cpa->vaddr;
if (!(within(vaddr, PAGE_OFFSET,
- PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT))
-#ifdef CONFIG_X86_64
- || within(vaddr, PAGE_OFFSET + (1UL<<32),
- PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))
-#endif
- )) {
+ PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
alias_cpa = *cpa;
temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
req_type & _PAGE_CACHE_MASK);
}
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return reserve_ram_pages_type(start, end, req_type, new_type);
- else if (is_range_ram < 0)
- return -EINVAL;
+ if (new_type)
+ *new_type = actual_type;
+
+ /*
+ * For legacy reasons, some parts of the physical address range in the
+ * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+ * the e820 tables). So we will track the memory attributes of this
+ * legacy 1MB region using the linear memtype_list always.
+ */
+ if (end >= ISA_END_ADDRESS) {
+ is_range_ram = pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return reserve_ram_pages_type(start, end, req_type,
+ new_type);
+ else if (is_range_ram < 0)
+ return -EINVAL;
+ }
new = kmalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
new->end = end;
new->type = actual_type;
- if (new_type)
- *new_type = actual_type;
-
spin_lock(&memtype_lock);
if (cached_entry && start >= cached_start)
if (is_ISA_range(start, end - 1))
return 0;
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return free_ram_pages_type(start, end);
- else if (is_range_ram < 0)
- return -EINVAL;
+ /*
+ * For legacy reasons, some parts of the physical address range in the
+ * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+ * the e820 tables). So we will track the memory attributes of this
+ * legacy 1MB region using the linear memtype_list always.
+ */
+ if (end >= ISA_END_ADDRESS) {
+ is_range_ram = pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return free_ram_pages_type(start, end);
+ else if (is_range_ram < 0)
+ return -EINVAL;
+ }
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
+++ /dev/null
-__cpu_vendor_dev_X86_VENDOR_*
dstp = sg_page(dst);
vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset;
- sg_init_table(cipher, 2);
- sg_set_buf(cipher, iv, ivsize);
- authenc_chain(cipher, dst, vdst == iv + ivsize);
+ if (ivsize) {
+ sg_init_table(cipher, 2);
+ sg_set_buf(cipher, iv, ivsize);
+ authenc_chain(cipher, dst, vdst == iv + ivsize);
+ dst = cipher;
+ }
cryptlen = req->cryptlen + ivsize;
- hash = crypto_authenc_hash(req, flags, cipher, cryptlen);
+ hash = crypto_authenc_hash(req, flags, dst, cryptlen);
if (IS_ERR(hash))
return PTR_ERR(hash);
- scatterwalk_map_and_copy(hash, cipher, cryptlen,
+ scatterwalk_map_and_copy(hash, dst, cryptlen,
crypto_aead_authsize(authenc), 1);
return 0;
}
srcp = sg_page(src);
vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset;
- sg_init_table(cipher, 2);
- sg_set_buf(cipher, iv, ivsize);
- authenc_chain(cipher, src, vsrc == iv + ivsize);
+ if (ivsize) {
+ sg_init_table(cipher, 2);
+ sg_set_buf(cipher, iv, ivsize);
+ authenc_chain(cipher, src, vsrc == iv + ivsize);
+ src = cipher;
+ }
- return crypto_authenc_verify(req, cipher, cryptlen + ivsize);
+ return crypto_authenc_verify(req, src, cryptlen + ivsize);
}
static int crypto_authenc_decrypt(struct aead_request *req)
scatterwalk_done(&walk->in, 0, nbytes);
scatterwalk_done(&walk->out, 1, nbytes);
+err:
walk->total = nbytes;
walk->nbytes = nbytes;
return blkcipher_walk_next(desc, walk);
}
-err:
if (walk->iv != desc->info)
memcpy(desc->info, walk->iv, crypto_blkcipher_ivsize(tfm));
if (walk->buffer != walk->page)
if (assoclen) {
pctx->ilen = format_adata(idata, assoclen);
get_data_to_compute(cipher, pctx, req->assoc, req->assoclen);
+ } else {
+ pctx->ilen = 0;
}
/* compute plaintext into mac */
If unsure, say N.
config SATA_MV
- tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Marvell SATA support"
help
This option enables support for the Marvell Serial ATA family.
- Currently supports 88SX[56]0[48][01] chips.
+ Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+ as well as the newer [67]042 PCI-X/PCIe and SOC devices.
If unsure, say N.
}
}
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq nx6310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
}
}
+ if (ahci_broken_system_poweroff(pdev)) {
+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+ dev_info(&pdev->dev,
+ "quirky BIOS, skipping spindown on poweroff\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
}
}
+static bool piix_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq 2510p",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
/**
* piix_init_one - Register PIIX ATA PCI device with kernel services
* @pdev: PCI device to register
if (!in_module_init)
return -ENODEV;
+ if (piix_broken_system_poweroff(pdev)) {
+ piix_port_info[ent->driver_data].flags |=
+ ATA_FLAG_NO_POWEROFF_SPINDOWN |
+ ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+ dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+ "on poweroff and hibernation\n");
+ }
+
port_info[0] = piix_port_info[ent->driver_data];
port_info[1] = piix_port_info[ent->driver_data];
#include <linux/libata.h>
#include <linux/hdreg.h>
#include <linux/uaccess.h>
+#include <linux/suspend.h>
#include "libata.h"
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
} else {
+ /* Some odd clown BIOSen issue spindown on power off (ACPI S4
+ * or S5) causing some drives to spin up and down again.
+ */
+ if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+ system_state == SYSTEM_POWER_OFF)
+ goto skip;
+
+ if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+ system_entering_hibernation())
+ goto skip;
+
/* XXX: This is for backward compatibility, will be
* removed. Read Documentation/feature-removal-schedule.txt
* for more info.
scmd->scsi_done = qc->scsidone;
qc->scsidone = ata_delayed_done;
}
- scmd->result = SAM_STAT_GOOD;
- return 1;
+ goto skip;
}
/* Issue ATA STANDBY IMMEDIATE command */
return 0;
-invalid_fld:
+ invalid_fld:
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
+ skip:
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
}
* condition. Mark hint.
*/
ata_ehi_push_desc(ehi, "ST-ATA: "
- "DRQ=1 with device error, "
+ "DRQ=0 without device error, "
"dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
qc->err_mask |= AC_ERR_HSM;
}
+ /* There are oddball controllers with
+ * status register stuck at 0x7f and
+ * lbal/m/h at zero which makes it
+ * pass all other presence detection
+ * mechanisms we have. Set NODEV_HINT
+ * for it. Kernel bz#7241.
+ */
+ if (status == 0x7f)
+ qc->err_mask |= AC_ERR_NODEV_HINT;
+
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
* is changed after ata_pio_sectors().
ata_sff_sync might be sufficient. */
ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
-
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
static void rb532_pata_exec_command(struct ata_port *ap,
VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */
};
+enum {
+ VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
/*
* VIA SouthBridge chips.
*/
u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f,
+ VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 |
VIA_BAD_AST | VIA_SATA_PATA },
+ { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f,
+ VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
{ "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
{ "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f,
+ VIA_UDMA_133 | VIA_BAD_AST },
{ NULL }
};
static int printed_version;
u8 enable;
u32 timing;
+ unsigned long flags = id->driver_data;
int rc;
if (!printed_version++)
if (rc)
return rc;
+ if (flags & VIA_IDFLAG_SINGLE)
+ ppi[1] = &ata_dummy_port_info;
+
/* To find out how the IDE will behave and what features we
actually have to look at the bridge not the IDE controller */
- for (config = via_isa_bridges; config->id; config++)
+ for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+ config++)
if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
pci_dev_put(isa);
}
- if (!config->id) {
- printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
- return -ENODEV;
- }
pci_dev_put(isa);
if (!(config->flags & VIA_NO_ENABLES)) {
{ PCI_VDEVICE(VIA, 0x1571), },
{ PCI_VDEVICE(VIA, 0x3164), },
{ PCI_VDEVICE(VIA, 0x5324), },
+ { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
{ },
};
*
* --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
*
- * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
- *
- * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
- *
* --> Develop a low-power-consumption strategy, and implement it.
*
* --> [Experiment, low priority] Investigate interrupt coalescing.
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.24"
+#define DRV_VERSION "1.25"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
- GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
-
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
MV_HP_ERRATA_50XXB0 = (1 << 1),
struct mv_host_priv *hpriv = ap->host->private_data;
int hardport = mv_hardport_from_port(ap->port_no);
void __iomem *hc_mmio = mv_hc_base_from_port(
- mv_host_base(ap->host), hardport);
- u32 hc_irq_cause, ipending;
+ mv_host_base(ap->host), ap->port_no);
+ u32 hc_irq_cause;
/* clear EDMA event indicators, if any */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- /* clear EDMA interrupt indicator, if any */
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- ipending = (DEV_IRQ | DMA_IRQ) << hardport;
- if (hc_irq_cause & ipending) {
- writelfl(hc_irq_cause & ~ipending,
- hc_mmio + HC_IRQ_CAUSE_OFS);
- }
+ /* clear pending irq events */
+ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+ writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
mv_edma_cfg(ap, want_ncq);
*
* Gen-II does not support NCQ over a port multiplier
* (no FIS-based switching).
- *
- * We don't have hob_nsect when doing NCQ commands on Gen-II.
- * See mv_qc_prep() for more info.
*/
if (adev->flags & ATA_DFLAG_NCQ) {
if (sata_pmp_attached(adev->link->ap)) {
adev->flags &= ~ATA_DFLAG_NCQ;
ata_dev_printk(adev, KERN_INFO,
"NCQ disabled for command-based switching\n");
- } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
- adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
- ata_dev_printk(adev, KERN_INFO,
- "max_sectors limited to %u for NCQ\n",
- adev->max_sectors);
}
}
}
* only 11 bytes...so we must pick and choose required
* registers based on the command. So, we drop feature and
* hob_feature for [RW] DMA commands, but they are needed for
- * NCQ. NCQ will drop hob_nsect.
+ * NCQ. NCQ will drop hob_nsect, which is not needed there
+ * (nsect is used only for the tag; feat/hob_feat hold true nsect).
*/
switch (tf->command) {
case ATA_CMD_READ:
struct ata_host *host = dev_instance;
struct mv_host_priv *hpriv = host->private_data;
unsigned int handled = 0;
+ int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
u32 main_irq_cause, pending_irqs;
spin_lock(&host->lock);
+
+ /* for MSI: block new interrupts while in here */
+ if (using_msi)
+ writel(0, hpriv->main_irq_mask_addr);
+
main_irq_cause = readl(hpriv->main_irq_cause_addr);
pending_irqs = main_irq_cause & hpriv->main_irq_mask;
/*
handled = mv_host_intr(host, pending_irqs);
}
spin_unlock(&host->lock);
+
+ /* for MSI: unmask; interrupt cause bits will retrigger now */
+ if (using_msi)
+ writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+
return IRQ_RETVAL(handled);
}
writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* clear pending irq events */
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
mv_enable_port_irqs(ap, ERR_IRQ);
hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
+ /* initialize shadow irq mask with register's value */
+ hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
/* global interrupt mask: 0 == mask everything */
mv_set_main_irq_mask(host, ~0, 0);
if (rc)
return rc;
- /* Enable interrupts */
- if (msi && pci_enable_msi(pdev))
- pci_intx(pdev, 1);
+ /* Enable message-switched interrupts, if requested */
+ if (msi && pci_enable_msi(pdev) == 0)
+ hpriv->hp_flags |= MV_HP_FLAG_MSI;
mv_dump_pci_cfg(pdev, 0x68);
mv_print_info(host);
static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static int nv_adma_slave_config(struct scsi_device *sdev);
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
CK804,
ADMA,
+ MCP5x,
SWNCQ,
};
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
.inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
- .hardreset = nv_nf2_hardreset,
+ .hardreset = nv_noclassify_hardreset,
};
/* CK804 finally gets hardreset right */
.host_stop = nv_adma_host_stop,
};
+/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
+ * work, hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned. Define separate ops for mcp5x with
+ * nv_noclassify_hardreset().
+ */
+static struct ata_port_operations nv_mcp5x_ops = {
+ .inherits = &nv_common_ops,
+ .hardreset = nv_noclassify_hardreset,
+};
+
static struct ata_port_operations nv_swncq_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_mcp5x_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
.port_ops = &nv_adma_ops,
.private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
},
+ /* MCP5x */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_mcp5x_ops,
+ .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
+ },
/* SWNCQ */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
return 0;
}
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ bool online;
+ int rc;
+
+ rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+ &online, NULL);
+ return online ? -EAGAIN : rc;
+}
+
static void nv_nf2_freeze(struct ata_port *ap)
{
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
iowrite8(mask, scr_addr + NV_INT_ENABLE);
}
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- bool online;
- int rc;
-
- rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
- &online, NULL);
- return online ? -EAGAIN : rc;
-}
-
static void nv_ck804_freeze(struct ata_port *ap)
{
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
if (type == CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
type = ADMA;
- }
-
- if (type == SWNCQ) {
- if (swncq_enabled)
- dev_printk(KERN_NOTICE, &pdev->dev,
- "Using SWNCQ mode\n");
- else
- type = GENERIC;
+ } else if (type == MCP5x && swncq_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+ type = SWNCQ;
}
ppi[0] = &nv_port_info[type];
}
}
+static bool sil_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq nx6325",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x12UL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int board_id = ent->driver_data;
- const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+ struct ata_port_info pi = sil_port_info[board_id];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
struct ata_host *host;
void __iomem *mmio_base;
int n_ports, rc;
if (board_id == sil_3114)
n_ports = 4;
+ if (sil_broken_system_poweroff(pdev)) {
+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN |
+ ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+ dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+ "on poweroff and hibernation\n");
+ }
+
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
int dev_set_name(struct device *dev, const char *fmt, ...)
{
va_list vargs;
+ char *s;
va_start(vargs, fmt);
vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
va_end(vargs);
+
+ /* ewww... some of these buggers have / in the name... */
+ while ((s = strchr(dev->bus_id, '/')))
+ *s = '!';
+
return 0;
}
EXPORT_SYMBOL_GPL(dev_set_name);
return -EBUSY;
if (cpu_is_omap24xx()) {
- rng_ick = clk_get(NULL, "rng_ick");
+ rng_ick = clk_get(&pdev->dev, "rng_ick");
if (IS_ERR(rng_ick)) {
dev_err(&pdev->dev, "Could not get rng_ick\n");
ret = PTR_ERR(rng_ick);
/* check whether we're reopening an existing tty */
tty = tty_driver_lookup_tty(driver, inode, index);
- if (IS_ERR(tty))
+ if (IS_ERR(tty)) {
+ mutex_unlock(&tty_mutex);
return PTR_ERR(tty);
+ }
}
if (tty) {
---help---
Enable support for the Marvell XOR engine.
+config MX3_IPU
+ bool "MX3x Image Processing Unit support"
+ depends on ARCH_MX3
+ select DMA_ENGINE
+ default y
+ help
+ If you plan to use the Image Processing unit in the i.MX3x, say
+ Y here. If unsure, select Y.
+
+config MX3_IPU_IRQS
+ int "Number of dynamically mapped interrupts for IPU"
+ depends on MX3_IPU
+ range 2 137
+ default 4
+ help
+ Out of 137 interrupt sources on i.MX31 IPU only very few are used.
+ To avoid bloating the irq_desc[] array we allocate a sufficient
+ number of IRQ slots and map them dynamically to specific sources.
+
config DMA_ENGINE
bool
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_MX3_IPU) += ipu/
struct dma_chan *chan;
int cpu;
- WARN_ONCE(dmaengine_ref_count == 0,
- "client called %s without a reference", __func__);
-
cpu = get_cpu();
chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan;
put_cpu();
struct dma_device *device;
struct dma_chan *chan;
- WARN_ONCE(dmaengine_ref_count == 0,
- "client called %s without a reference", __func__);
-
rcu_read_lock();
list_for_each_entry_rcu(device, &dma_device_list, global_node) {
if (dma_has_cap(DMA_PRIVATE, device->cap_mask))
if (!dep)
return;
+ /* we'll submit tx->next now, so clear the link */
+ tx->next = NULL;
chan = dep->chan;
/* keep submitting up until a channel switch is detected
chan = thread->chan;
while (!kthread_should_stop()) {
+ struct dma_device *dev = chan->device;
+ struct dma_async_tx_descriptor *tx;
+ dma_addr_t dma_src, dma_dest;
+
total_tests++;
len = dmatest_random() % test_buf_size + 1;
dmatest_init_srcbuf(thread->srcbuf, src_off, len);
dmatest_init_dstbuf(thread->dstbuf, dst_off, len);
- cookie = dma_async_memcpy_buf_to_buf(chan,
- thread->dstbuf + dst_off,
- thread->srcbuf + src_off,
- len);
+ dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off,
+ len, DMA_TO_DEVICE);
+ /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
+ dma_dest = dma_map_single(dev->dev, thread->dstbuf,
+ test_buf_size, DMA_BIDIRECTIONAL);
+
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off,
+ dma_src, len,
+ DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP);
+ if (!tx) {
+ dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
+ dma_unmap_single(dev->dev, dma_dest,
+ test_buf_size, DMA_BIDIRECTIONAL);
+ pr_warning("%s: #%u: prep error with src_off=0x%x "
+ "dst_off=0x%x len=0x%x\n",
+ thread_name, total_tests - 1,
+ src_off, dst_off, len);
+ msleep(100);
+ failed_tests++;
+ continue;
+ }
+ tx->callback = NULL;
+ cookie = tx->tx_submit(tx);
+
if (dma_submit_error(cookie)) {
pr_warning("%s: #%u: submit error %d with src_off=0x%x "
"dst_off=0x%x len=0x%x\n",
failed_tests++;
continue;
}
+ /* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */
+ dma_unmap_single(dev->dev, dma_dest,
+ test_buf_size, DMA_BIDIRECTIONAL);
error_count = 0;
*/
WARN_ON(fdev->feature != new_fsl_chan->feature);
- new_fsl_chan->dev = &new_fsl_chan->common.dev->device;
+ new_fsl_chan->dev = fdev->dev;
new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
}
dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
- compatible, new_fsl_chan->irq);
+ compatible,
+ new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
return 0;
static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
{
- free_irq(fchan->irq, fchan);
+ if (fchan->irq != NO_IRQ)
+ free_irq(fchan->irq, fchan);
list_del(&fchan->common.device_node);
iounmap(fchan->reg_base);
kfree(fchan);
--- /dev/null
+obj-y += ipu_irq.o ipu_idmac.o
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+#define FS_VF_IN_VALID 0x00000002
+#define FS_ENC_IN_VALID 0x00000001
+
+/*
+ * There can be only one, we could allocate it dynamically, but then we'd have
+ * to add an extra parameter to some functions, and use something as ugly as
+ * struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device));
+ * in the ISR
+ */
+static struct ipu ipu_data;
+
+#define to_ipu(id) container_of(id, struct ipu, idmac)
+
+static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg)
+{
+ return __raw_readl(ipu->reg_ic + reg);
+}
+
+#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF)
+
+static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+ __raw_writel(value, ipu->reg_ic + reg);
+}
+
+#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF)
+
+static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg)
+{
+ return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+ __raw_writel(value, ipu->reg_ipu + reg);
+}
+
+/*****************************************************************************
+ * IPU / IC common functions
+ */
+static void dump_idmac_reg(struct ipu *ipu)
+{
+ dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, "
+ "IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n",
+ idmac_read_icreg(ipu, IDMAC_CONF),
+ idmac_read_icreg(ipu, IC_CONF),
+ idmac_read_icreg(ipu, IDMAC_CHA_EN),
+ idmac_read_icreg(ipu, IDMAC_CHA_PRI),
+ idmac_read_icreg(ipu, IDMAC_CHA_BUSY));
+ dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, "
+ "DB_MODE 0x%x, TASKS_STAT 0x%x\n",
+ idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+ idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+ idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF),
+ idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL),
+ idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+}
+
+static uint32_t bytes_per_pixel(enum pixel_fmt fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_GENERIC: /* generic data */
+ case IPU_PIX_FMT_RGB332:
+ case IPU_PIX_FMT_YUV420P:
+ case IPU_PIX_FMT_YUV422P:
+ default:
+ return 1;
+ case IPU_PIX_FMT_RGB565:
+ case IPU_PIX_FMT_YUYV:
+ case IPU_PIX_FMT_UYVY:
+ return 2;
+ case IPU_PIX_FMT_BGR24:
+ case IPU_PIX_FMT_RGB24:
+ return 3;
+ case IPU_PIX_FMT_GENERIC_32: /* generic data */
+ case IPU_PIX_FMT_BGR32:
+ case IPU_PIX_FMT_RGB32:
+ case IPU_PIX_FMT_ABGR32:
+ return 4;
+ }
+}
+
+/* Enable / disable direct write to memory by the Camera Sensor Interface */
+static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+ uint32_t ic_conf, mask;
+
+ switch (channel) {
+ case IDMAC_IC_0:
+ mask = IC_CONF_PRPENC_EN;
+ break;
+ case IDMAC_IC_7:
+ mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+ break;
+ default:
+ return;
+ }
+ ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask;
+ idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+ uint32_t ic_conf, mask;
+
+ switch (channel) {
+ case IDMAC_IC_0:
+ mask = IC_CONF_PRPENC_EN;
+ break;
+ case IDMAC_IC_7:
+ mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+ break;
+ default:
+ return;
+ }
+ ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask;
+ idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel)
+{
+ uint32_t stat = TASK_STAT_IDLE;
+ uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT);
+
+ switch (channel) {
+ case IDMAC_IC_7:
+ stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >>
+ TSTAT_CSI2MEM_OFFSET;
+ break;
+ case IDMAC_IC_0:
+ case IDMAC_SDC_0:
+ case IDMAC_SDC_1:
+ default:
+ break;
+ }
+ return stat;
+}
+
+struct chan_param_mem_planar {
+ /* Word 0 */
+ u32 xv:10;
+ u32 yv:10;
+ u32 xb:12;
+
+ u32 yb:12;
+ u32 res1:2;
+ u32 nsb:1;
+ u32 lnpb:6;
+ u32 ubo_l:11;
+
+ u32 ubo_h:15;
+ u32 vbo_l:17;
+
+ u32 vbo_h:9;
+ u32 res2:3;
+ u32 fw:12;
+ u32 fh_l:8;
+
+ u32 fh_h:4;
+ u32 res3:28;
+
+ /* Word 1 */
+ u32 eba0;
+
+ u32 eba1;
+
+ u32 bpp:3;
+ u32 sl:14;
+ u32 pfs:3;
+ u32 bam:3;
+ u32 res4:2;
+ u32 npb:6;
+ u32 res5:1;
+
+ u32 sat:2;
+ u32 res6:30;
+} __attribute__ ((packed));
+
+struct chan_param_mem_interleaved {
+ /* Word 0 */
+ u32 xv:10;
+ u32 yv:10;
+ u32 xb:12;
+
+ u32 yb:12;
+ u32 sce:1;
+ u32 res1:1;
+ u32 nsb:1;
+ u32 lnpb:6;
+ u32 sx:10;
+ u32 sy_l:1;
+
+ u32 sy_h:9;
+ u32 ns:10;
+ u32 sm:10;
+ u32 sdx_l:3;
+
+ u32 sdx_h:2;
+ u32 sdy:5;
+ u32 sdrx:1;
+ u32 sdry:1;
+ u32 sdr1:1;
+ u32 res2:2;
+ u32 fw:12;
+ u32 fh_l:8;
+
+ u32 fh_h:4;
+ u32 res3:28;
+
+ /* Word 1 */
+ u32 eba0;
+
+ u32 eba1;
+
+ u32 bpp:3;
+ u32 sl:14;
+ u32 pfs:3;
+ u32 bam:3;
+ u32 res4:2;
+ u32 npb:6;
+ u32 res5:1;
+
+ u32 sat:2;
+ u32 scc:1;
+ u32 ofs0:5;
+ u32 ofs1:5;
+ u32 ofs2:5;
+ u32 ofs3:5;
+ u32 wid0:3;
+ u32 wid1:3;
+ u32 wid2:3;
+
+ u32 wid3:3;
+ u32 dec_sel:1;
+ u32 res6:28;
+} __attribute__ ((packed));
+
+union chan_param_mem {
+ struct chan_param_mem_planar pp;
+ struct chan_param_mem_interleaved ip;
+};
+
+static void ipu_ch_param_set_plane_offset(union chan_param_mem *params,
+ u32 u_offset, u32 v_offset)
+{
+ params->pp.ubo_l = u_offset & 0x7ff;
+ params->pp.ubo_h = u_offset >> 11;
+ params->pp.vbo_l = v_offset & 0x1ffff;
+ params->pp.vbo_h = v_offset >> 17;
+}
+
+static void ipu_ch_param_set_size(union chan_param_mem *params,
+ uint32_t pixel_fmt, uint16_t width,
+ uint16_t height, uint16_t stride)
+{
+ u32 u_offset;
+ u32 v_offset;
+
+ params->pp.fw = width - 1;
+ params->pp.fh_l = height - 1;
+ params->pp.fh_h = (height - 1) >> 8;
+ params->pp.sl = stride - 1;
+
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_GENERIC:
+ /*Represents 8-bit Generic data */
+ params->pp.bpp = 3;
+ params->pp.pfs = 7;
+ params->pp.npb = 31;
+ params->pp.sat = 2; /* SAT = use 32-bit access */
+ break;
+ case IPU_PIX_FMT_GENERIC_32:
+ /*Represents 32-bit Generic data */
+ params->pp.bpp = 0;
+ params->pp.pfs = 7;
+ params->pp.npb = 7;
+ params->pp.sat = 2; /* SAT = use 32-bit access */
+ break;
+ case IPU_PIX_FMT_RGB565:
+ params->ip.bpp = 2;
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 0; /* Red bit offset */
+ params->ip.ofs1 = 5; /* Green bit offset */
+ params->ip.ofs2 = 11; /* Blue bit offset */
+ params->ip.ofs3 = 16; /* Alpha bit offset */
+ params->ip.wid0 = 4; /* Red bit width - 1 */
+ params->ip.wid1 = 5; /* Green bit width - 1 */
+ params->ip.wid2 = 4; /* Blue bit width - 1 */
+ break;
+ case IPU_PIX_FMT_BGR24:
+ params->ip.bpp = 1; /* 24 BPP & RGB PFS */
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 0; /* Red bit offset */
+ params->ip.ofs1 = 8; /* Green bit offset */
+ params->ip.ofs2 = 16; /* Blue bit offset */
+ params->ip.ofs3 = 24; /* Alpha bit offset */
+ params->ip.wid0 = 7; /* Red bit width - 1 */
+ params->ip.wid1 = 7; /* Green bit width - 1 */
+ params->ip.wid2 = 7; /* Blue bit width - 1 */
+ break;
+ case IPU_PIX_FMT_RGB24:
+ params->ip.bpp = 1; /* 24 BPP & RGB PFS */
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 16; /* Red bit offset */
+ params->ip.ofs1 = 8; /* Green bit offset */
+ params->ip.ofs2 = 0; /* Blue bit offset */
+ params->ip.ofs3 = 24; /* Alpha bit offset */
+ params->ip.wid0 = 7; /* Red bit width - 1 */
+ params->ip.wid1 = 7; /* Green bit width - 1 */
+ params->ip.wid2 = 7; /* Blue bit width - 1 */
+ break;
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_BGR32:
+ params->ip.bpp = 0;
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 8; /* Red bit offset */
+ params->ip.ofs1 = 16; /* Green bit offset */
+ params->ip.ofs2 = 24; /* Blue bit offset */
+ params->ip.ofs3 = 0; /* Alpha bit offset */
+ params->ip.wid0 = 7; /* Red bit width - 1 */
+ params->ip.wid1 = 7; /* Green bit width - 1 */
+ params->ip.wid2 = 7; /* Blue bit width - 1 */
+ params->ip.wid3 = 7; /* Alpha bit width - 1 */
+ break;
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_RGB32:
+ params->ip.bpp = 0;
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 24; /* Red bit offset */
+ params->ip.ofs1 = 16; /* Green bit offset */
+ params->ip.ofs2 = 8; /* Blue bit offset */
+ params->ip.ofs3 = 0; /* Alpha bit offset */
+ params->ip.wid0 = 7; /* Red bit width - 1 */
+ params->ip.wid1 = 7; /* Green bit width - 1 */
+ params->ip.wid2 = 7; /* Blue bit width - 1 */
+ params->ip.wid3 = 7; /* Alpha bit width - 1 */
+ break;
+ case IPU_PIX_FMT_ABGR32:
+ params->ip.bpp = 0;
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 8; /* Red bit offset */
+ params->ip.ofs1 = 16; /* Green bit offset */
+ params->ip.ofs2 = 24; /* Blue bit offset */
+ params->ip.ofs3 = 0; /* Alpha bit offset */
+ params->ip.wid0 = 7; /* Red bit width - 1 */
+ params->ip.wid1 = 7; /* Green bit width - 1 */
+ params->ip.wid2 = 7; /* Blue bit width - 1 */
+ params->ip.wid3 = 7; /* Alpha bit width - 1 */
+ break;
+ case IPU_PIX_FMT_UYVY:
+ params->ip.bpp = 2;
+ params->ip.pfs = 6;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ break;
+ case IPU_PIX_FMT_YUV420P2:
+ case IPU_PIX_FMT_YUV420P:
+ params->ip.bpp = 3;
+ params->ip.pfs = 3;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ u_offset = stride * height;
+ v_offset = u_offset + u_offset / 4;
+ ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+ break;
+ case IPU_PIX_FMT_YVU422P:
+ params->ip.bpp = 3;
+ params->ip.pfs = 2;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ v_offset = stride * height;
+ u_offset = v_offset + v_offset / 2;
+ ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+ break;
+ case IPU_PIX_FMT_YUV422P:
+ params->ip.bpp = 3;
+ params->ip.pfs = 2;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ u_offset = stride * height;
+ v_offset = u_offset + u_offset / 2;
+ ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+ break;
+ default:
+ dev_err(ipu_data.dev,
+ "mxc ipu: unimplemented pixel format %d\n", pixel_fmt);
+ break;
+ }
+
+ params->pp.nsb = 1;
+}
+
+static void ipu_ch_param_set_burst_size(union chan_param_mem *params,
+ uint16_t burst_pixels)
+{
+ params->pp.npb = burst_pixels - 1;
+};
+
+static void ipu_ch_param_set_buffer(union chan_param_mem *params,
+ dma_addr_t buf0, dma_addr_t buf1)
+{
+ params->pp.eba0 = buf0;
+ params->pp.eba1 = buf1;
+};
+
+static void ipu_ch_param_set_rotation(union chan_param_mem *params,
+ enum ipu_rotate_mode rotate)
+{
+ params->pp.bam = rotate;
+};
+
+static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
+ uint32_t num_words)
+{
+ for (; num_words > 0; num_words--) {
+ dev_dbg(ipu_data.dev,
+ "write param mem - addr = 0x%08X, data = 0x%08X\n",
+ addr, *data);
+ idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR);
+ idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA);
+ addr++;
+ if ((addr & 0x7) == 5) {
+ addr &= ~0x7; /* set to word 0 */
+ addr += 8; /* increment to next row */
+ }
+ }
+}
+
+static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size,
+ uint32_t *resize_coeff,
+ uint32_t *downsize_coeff)
+{
+ uint32_t temp_size;
+ uint32_t temp_downsize;
+
+ *resize_coeff = 1 << 13;
+ *downsize_coeff = 1 << 13;
+
+ /* Cannot downsize more than 8:1 */
+ if (out_size << 3 < in_size)
+ return -EINVAL;
+
+ /* compute downsizing coefficient */
+ temp_downsize = 0;
+ temp_size = in_size;
+ while (temp_size >= out_size * 2 && temp_downsize < 2) {
+ temp_size >>= 1;
+ temp_downsize++;
+ }
+ *downsize_coeff = temp_downsize;
+
+ /*
+ * compute resizing coefficient using the following formula:
+ * resize_coeff = M*(SI -1)/(SO - 1)
+ * where M = 2^13, SI - input size, SO - output size
+ */
+ *resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1);
+ if (*resize_coeff >= 16384L) {
+ dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n");
+ *resize_coeff = 0x3FFF;
+ }
+
+ dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, "
+ "downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size,
+ *downsize_coeff, *resize_coeff >= 8192L ? 1 : 0,
+ ((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff);
+
+ return 0;
+}
+
+static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_RGB565:
+ case IPU_PIX_FMT_BGR24:
+ case IPU_PIX_FMT_RGB24:
+ case IPU_PIX_FMT_BGR32:
+ case IPU_PIX_FMT_RGB32:
+ return IPU_COLORSPACE_RGB;
+ default:
+ return IPU_COLORSPACE_YCBCR;
+ }
+}
+
+static int ipu_ic_init_prpenc(struct ipu *ipu,
+ union ipu_channel_param *params, bool src_is_csi)
+{
+ uint32_t reg, ic_conf;
+ uint32_t downsize_coeff, resize_coeff;
+ enum ipu_color_space in_fmt, out_fmt;
+
+ /* Setup vertical resizing */
+ calc_resize_coeffs(params->video.in_height,
+ params->video.out_height,
+ &resize_coeff, &downsize_coeff);
+ reg = (downsize_coeff << 30) | (resize_coeff << 16);
+
+ /* Setup horizontal resizing */
+ calc_resize_coeffs(params->video.in_width,
+ params->video.out_width,
+ &resize_coeff, &downsize_coeff);
+ reg |= (downsize_coeff << 14) | resize_coeff;
+
+ /* Setup color space conversion */
+ in_fmt = format_to_colorspace(params->video.in_pixel_fmt);
+ out_fmt = format_to_colorspace(params->video.out_pixel_fmt);
+
+ /*
+ * Colourspace conversion unsupported yet - see _init_csc() in
+ * Freescale sources
+ */
+ if (in_fmt != out_fmt) {
+ dev_err(ipu->dev, "Colourspace conversion unsupported!\n");
+ return -EOPNOTSUPP;
+ }
+
+ idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC);
+
+ ic_conf = idmac_read_icreg(ipu, IC_CONF);
+
+ if (src_is_csi)
+ ic_conf &= ~IC_CONF_RWS_EN;
+ else
+ ic_conf |= IC_CONF_RWS_EN;
+
+ idmac_write_icreg(ipu, ic_conf, IC_CONF);
+
+ return 0;
+}
+
+static uint32_t dma_param_addr(uint32_t dma_ch)
+{
+ /* Channel Parameter Memory */
+ return 0x10000 | (dma_ch << 4);
+};
+
+static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel,
+ bool prio)
+{
+ u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI);
+
+ if (prio)
+ reg |= 1UL << channel;
+ else
+ reg &= ~(1UL << channel);
+
+ idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI);
+
+ dump_idmac_reg(ipu);
+}
+
+static uint32_t ipu_channel_conf_mask(enum ipu_channel channel)
+{
+ uint32_t mask;
+
+ switch (channel) {
+ case IDMAC_IC_0:
+ case IDMAC_IC_7:
+ mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN;
+ break;
+ case IDMAC_SDC_0:
+ case IDMAC_SDC_1:
+ mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+ break;
+ default:
+ mask = 0;
+ break;
+ }
+
+ return mask;
+}
+
+/**
+ * ipu_enable_channel() - enable an IPU channel.
+ * @channel: channel ID.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+ struct ipu *ipu = to_ipu(idmac);
+ enum ipu_channel channel = ichan->dma_chan.chan_id;
+ uint32_t reg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu->lock, flags);
+
+ /* Reset to buffer 0 */
+ idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF);
+ ichan->active_buffer = 0;
+ ichan->status = IPU_CHANNEL_ENABLED;
+
+ switch (channel) {
+ case IDMAC_SDC_0:
+ case IDMAC_SDC_1:
+ case IDMAC_IC_7:
+ ipu_channel_set_priority(ipu, channel, true);
+ default:
+ break;
+ }
+
+ reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+
+ idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN);
+
+ ipu_ic_enable_task(ipu, channel);
+
+ spin_unlock_irqrestore(&ipu->lock, flags);
+ return 0;
+}
+
+/**
+ * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel.
+ * @channel: channel ID.
+ * @pixel_fmt: pixel format of buffer. Pixel format is a FOURCC ASCII code.
+ * @width: width of buffer in pixels.
+ * @height: height of buffer in pixels.
+ * @stride: stride length of buffer in pixels.
+ * @rot_mode: rotation mode of buffer. A rotation setting other than
+ * IPU_ROTATE_VERT_FLIP should only be used for input buffers of
+ * rotation channels.
+ * @phyaddr_0: buffer 0 physical address.
+ * @phyaddr_1: buffer 1 physical address. Setting this to a value other than
+ * NULL enables double buffering mode.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int ipu_init_channel_buffer(struct idmac_channel *ichan,
+ enum pixel_fmt pixel_fmt,
+ uint16_t width, uint16_t height,
+ uint32_t stride,
+ enum ipu_rotate_mode rot_mode,
+ dma_addr_t phyaddr_0, dma_addr_t phyaddr_1)
+{
+ enum ipu_channel channel = ichan->dma_chan.chan_id;
+ struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+ struct ipu *ipu = to_ipu(idmac);
+ union chan_param_mem params = {};
+ unsigned long flags;
+ uint32_t reg;
+ uint32_t stride_bytes;
+
+ stride_bytes = stride * bytes_per_pixel(pixel_fmt);
+
+ if (stride_bytes % 4) {
+ dev_err(ipu->dev,
+ "Stride length must be 32-bit aligned, stride = %d, bytes = %d\n",
+ stride, stride_bytes);
+ return -EINVAL;
+ }
+
+ /* IC channel's stride must be a multiple of 8 pixels */
+ if ((channel <= 13) && (stride % 8)) {
+ dev_err(ipu->dev, "Stride must be 8 pixel multiple\n");
+ return -EINVAL;
+ }
+
+ /* Build parameter memory data for DMA channel */
+ ipu_ch_param_set_size(¶ms, pixel_fmt, width, height, stride_bytes);
+ ipu_ch_param_set_buffer(¶ms, phyaddr_0, phyaddr_1);
+ ipu_ch_param_set_rotation(¶ms, rot_mode);
+ /* Some channels (rotation) have restriction on burst length */
+ switch (channel) {
+ case IDMAC_IC_7: /* Hangs with burst 8, 16, other values
+ invalid - Table 44-30 */
+/*
+ ipu_ch_param_set_burst_size(¶ms, 8);
+ */
+ break;
+ case IDMAC_SDC_0:
+ case IDMAC_SDC_1:
+ /* In original code only IPU_PIX_FMT_RGB565 was setting burst */
+ ipu_ch_param_set_burst_size(¶ms, 16);
+ break;
+ case IDMAC_IC_0:
+ default:
+ break;
+ }
+
+ spin_lock_irqsave(&ipu->lock, flags);
+
+ ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10);
+
+ reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+
+ if (phyaddr_1)
+ reg |= 1UL << channel;
+ else
+ reg &= ~(1UL << channel);
+
+ idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL);
+
+ ichan->status = IPU_CHANNEL_READY;
+
+ spin_unlock_irqrestore(ipu->lock, flags);
+
+ return 0;
+}
+
+/**
+ * ipu_select_buffer() - mark a channel's buffer as ready.
+ * @channel: channel ID.
+ * @buffer_n: buffer number to mark ready.
+ */
+static void ipu_select_buffer(enum ipu_channel channel, int buffer_n)
+{
+ /* No locking - this is a write-one-to-set register, cleared by IPU */
+ if (buffer_n == 0)
+ /* Mark buffer 0 as ready. */
+ idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY);
+ else
+ /* Mark buffer 1 as ready. */
+ idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY);
+}
+
+/**
+ * ipu_update_channel_buffer() - update physical address of a channel buffer.
+ * @channel: channel ID.
+ * @buffer_n: buffer number to update.
+ * 0 or 1 are the only valid values.
+ * @phyaddr: buffer physical address.
+ * @return: Returns 0 on success or negative error code on failure. This
+ * function will fail if the buffer is set to ready.
+ */
+/* Called under spin_lock(_irqsave)(&ichan->lock) */
+static int ipu_update_channel_buffer(enum ipu_channel channel,
+ int buffer_n, dma_addr_t phyaddr)
+{
+ uint32_t reg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu_data.lock, flags);
+
+ if (buffer_n == 0) {
+ reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY);
+ if (reg & (1UL << channel)) {
+ spin_unlock_irqrestore(&ipu_data.lock, flags);
+ return -EACCES;
+ }
+
+ /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
+ idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+ 0x0008UL, IPU_IMA_ADDR);
+ idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+ } else {
+ reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY);
+ if (reg & (1UL << channel)) {
+ spin_unlock_irqrestore(&ipu_data.lock, flags);
+ return -EACCES;
+ }
+
+ /* Check if double-buffering is already enabled */
+ reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL);
+
+ if (!(reg & (1UL << channel)))
+ idmac_write_ipureg(&ipu_data, reg | (1UL << channel),
+ IPU_CHA_DB_MODE_SEL);
+
+ /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */
+ idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+ 0x0009UL, IPU_IMA_ADDR);
+ idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+ }
+
+ spin_unlock_irqrestore(&ipu_data.lock, flags);
+
+ return 0;
+}
+
+/* Called under spin_lock_irqsave(&ichan->lock) */
+static int ipu_submit_channel_buffers(struct idmac_channel *ichan,
+ struct idmac_tx_desc *desc)
+{
+ struct scatterlist *sg;
+ int i, ret = 0;
+
+ for (i = 0, sg = desc->sg; i < 2 && sg; i++) {
+ if (!ichan->sg[i]) {
+ ichan->sg[i] = sg;
+
+ /*
+ * On first invocation this shouldn't be necessary, the
+ * call to ipu_init_channel_buffer() above will set
+ * addresses for us, so we could make it conditional
+ * on status >= IPU_CHANNEL_ENABLED, but doing it again
+ * shouldn't hurt either.
+ */
+ ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i,
+ sg_dma_address(sg));
+ if (ret < 0)
+ return ret;
+
+ ipu_select_buffer(ichan->dma_chan.chan_id, i);
+
+ sg = sg_next(sg);
+ }
+ }
+
+ return ret;
+}
+
+static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct idmac_tx_desc *desc = to_tx_desc(tx);
+ struct idmac_channel *ichan = to_idmac_chan(tx->chan);
+ struct idmac *idmac = to_idmac(tx->chan->device);
+ struct ipu *ipu = to_ipu(idmac);
+ dma_cookie_t cookie;
+ unsigned long flags;
+
+ /* Sanity check */
+ if (!list_empty(&desc->list)) {
+ /* The descriptor doesn't belong to client */
+ dev_err(&ichan->dma_chan.dev->device,
+ "Descriptor %p not prepared!\n", tx);
+ return -EBUSY;
+ }
+
+ mutex_lock(&ichan->chan_mutex);
+
+ if (ichan->status < IPU_CHANNEL_READY) {
+ struct idmac_video_param *video = &ichan->params.video;
+ /*
+ * Initial buffer assignment - the first two sg-entries from
+ * the descriptor will end up in the IDMAC buffers
+ */
+ dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 :
+ sg_dma_address(&desc->sg[1]);
+
+ WARN_ON(ichan->sg[0] || ichan->sg[1]);
+
+ cookie = ipu_init_channel_buffer(ichan,
+ video->out_pixel_fmt,
+ video->out_width,
+ video->out_height,
+ video->out_stride,
+ IPU_ROTATE_NONE,
+ sg_dma_address(&desc->sg[0]),
+ dma_1);
+ if (cookie < 0)
+ goto out;
+ }
+
+ /* ipu->lock can be taken under ichan->lock, but not v.v. */
+ spin_lock_irqsave(&ichan->lock, flags);
+
+ /* submit_buffers() atomically verifies and fills empty sg slots */
+ cookie = ipu_submit_channel_buffers(ichan, desc);
+
+ spin_unlock_irqrestore(&ichan->lock, flags);
+
+ if (cookie < 0)
+ goto out;
+
+ cookie = ichan->dma_chan.cookie;
+
+ if (++cookie < 0)
+ cookie = 1;
+
+ /* from dmaengine.h: "last cookie value returned to client" */
+ ichan->dma_chan.cookie = cookie;
+ tx->cookie = cookie;
+ spin_lock_irqsave(&ichan->lock, flags);
+ list_add_tail(&desc->list, &ichan->queue);
+ spin_unlock_irqrestore(&ichan->lock, flags);
+
+ if (ichan->status < IPU_CHANNEL_ENABLED) {
+ int ret = ipu_enable_channel(idmac, ichan);
+ if (ret < 0) {
+ cookie = ret;
+ spin_lock_irqsave(&ichan->lock, flags);
+ list_del_init(&desc->list);
+ spin_unlock_irqrestore(&ichan->lock, flags);
+ tx->cookie = cookie;
+ ichan->dma_chan.cookie = cookie;
+ }
+ }
+
+ dump_idmac_reg(ipu);
+
+out:
+ mutex_unlock(&ichan->chan_mutex);
+
+ return cookie;
+}
+
+/* Called with ichan->chan_mutex held */
+static int idmac_desc_alloc(struct idmac_channel *ichan, int n)
+{
+ struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc));
+ struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+
+ if (!desc)
+ return -ENOMEM;
+
+ /* No interrupts, just disable the tasklet for a moment */
+ tasklet_disable(&to_ipu(idmac)->tasklet);
+
+ ichan->n_tx_desc = n;
+ ichan->desc = desc;
+ INIT_LIST_HEAD(&ichan->queue);
+ INIT_LIST_HEAD(&ichan->free_list);
+
+ while (n--) {
+ struct dma_async_tx_descriptor *txd = &desc->txd;
+
+ memset(txd, 0, sizeof(*txd));
+ dma_async_tx_descriptor_init(txd, &ichan->dma_chan);
+ txd->tx_submit = idmac_tx_submit;
+ txd->chan = &ichan->dma_chan;
+ INIT_LIST_HEAD(&txd->tx_list);
+
+ list_add(&desc->list, &ichan->free_list);
+
+ desc++;
+ }
+
+ tasklet_enable(&to_ipu(idmac)->tasklet);
+
+ return 0;
+}
+
+/**
+ * ipu_init_channel() - initialize an IPU channel.
+ * @idmac: IPU DMAC context.
+ * @ichan: pointer to the channel object.
+ * @return 0 on success or negative error code on failure.
+ */
+static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+ union ipu_channel_param *params = &ichan->params;
+ uint32_t ipu_conf;
+ enum ipu_channel channel = ichan->dma_chan.chan_id;
+ unsigned long flags;
+ uint32_t reg;
+ struct ipu *ipu = to_ipu(idmac);
+ int ret = 0, n_desc = 0;
+
+ dev_dbg(ipu->dev, "init channel = %d\n", channel);
+
+ if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 &&
+ channel != IDMAC_IC_7)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ipu->lock, flags);
+
+ switch (channel) {
+ case IDMAC_IC_7:
+ n_desc = 16;
+ reg = idmac_read_icreg(ipu, IC_CONF);
+ idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF);
+ break;
+ case IDMAC_IC_0:
+ n_desc = 16;
+ reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW);
+ idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW);
+ ret = ipu_ic_init_prpenc(ipu, params, true);
+ break;
+ case IDMAC_SDC_0:
+ case IDMAC_SDC_1:
+ n_desc = 4;
+ default:
+ break;
+ }
+
+ ipu->channel_init_mask |= 1L << channel;
+
+ /* Enable IPU sub module */
+ ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) |
+ ipu_channel_conf_mask(channel);
+ idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+ spin_unlock_irqrestore(&ipu->lock, flags);
+
+ if (n_desc && !ichan->desc)
+ ret = idmac_desc_alloc(ichan, n_desc);
+
+ dump_idmac_reg(ipu);
+
+ return ret;
+}
+
+/**
+ * ipu_uninit_channel() - uninitialize an IPU channel.
+ * @idmac: IPU DMAC context.
+ * @ichan: pointer to the channel object.
+ */
+static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+ enum ipu_channel channel = ichan->dma_chan.chan_id;
+ unsigned long flags;
+ uint32_t reg;
+ unsigned long chan_mask = 1UL << channel;
+ uint32_t ipu_conf;
+ struct ipu *ipu = to_ipu(idmac);
+
+ spin_lock_irqsave(&ipu->lock, flags);
+
+ if (!(ipu->channel_init_mask & chan_mask)) {
+ dev_err(ipu->dev, "Channel already uninitialized %d\n",
+ channel);
+ spin_unlock_irqrestore(&ipu->lock, flags);
+ return;
+ }
+
+ /* Reset the double buffer */
+ reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+ idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL);
+
+ ichan->sec_chan_en = false;
+
+ switch (channel) {
+ case IDMAC_IC_7:
+ reg = idmac_read_icreg(ipu, IC_CONF);
+ idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN),
+ IC_CONF);
+ break;
+ case IDMAC_IC_0:
+ reg = idmac_read_icreg(ipu, IC_CONF);
+ idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1),
+ IC_CONF);
+ break;
+ case IDMAC_SDC_0:
+ case IDMAC_SDC_1:
+ default:
+ break;
+ }
+
+ ipu->channel_init_mask &= ~(1L << channel);
+
+ ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) &
+ ~ipu_channel_conf_mask(channel);
+ idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+ spin_unlock_irqrestore(&ipu->lock, flags);
+
+ ichan->n_tx_desc = 0;
+ vfree(ichan->desc);
+ ichan->desc = NULL;
+}
+
+/**
+ * ipu_disable_channel() - disable an IPU channel.
+ * @idmac: IPU DMAC context.
+ * @ichan: channel object pointer.
+ * @wait_for_stop: flag to set whether to wait for channel end of frame or
+ * return immediately.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
+ bool wait_for_stop)
+{
+ enum ipu_channel channel = ichan->dma_chan.chan_id;
+ struct ipu *ipu = to_ipu(idmac);
+ uint32_t reg;
+ unsigned long flags;
+ unsigned long chan_mask = 1UL << channel;
+ unsigned int timeout;
+
+ if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) {
+ timeout = 40;
+ /* This waiting always fails. Related to spurious irq problem */
+ while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) ||
+ (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) {
+ timeout--;
+ msleep(10);
+
+ if (!timeout) {
+ dev_dbg(ipu->dev,
+ "Warning: timeout waiting for channel %u to "
+ "stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, "
+ "busy = 0x%08X, tstat = 0x%08X\n", channel,
+ idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+ idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+ idmac_read_icreg(ipu, IDMAC_CHA_BUSY),
+ idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+ break;
+ }
+ }
+ dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout);
+ }
+ /* SDC BG and FG must be disabled before DMA is disabled */
+ if (wait_for_stop && (channel == IDMAC_SDC_0 ||
+ channel == IDMAC_SDC_1)) {
+ for (timeout = 5;
+ timeout && !ipu_irq_status(ichan->eof_irq); timeout--)
+ msleep(5);
+ }
+
+ spin_lock_irqsave(&ipu->lock, flags);
+
+ /* Disable IC task */
+ ipu_ic_disable_task(ipu, channel);
+
+ /* Disable DMA channel(s) */
+ reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+ idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
+
+ /*
+ * Problem (observed with channel DMAIC_7): after enabling the channel
+ * and initialising buffers, there comes an interrupt with current still
+ * pointing at buffer 0, whereas it should use buffer 0 first and only
+ * generate an interrupt when it is done, then current should already
+ * point to buffer 1. This spurious interrupt also comes on channel
+ * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
+ * first interrupt, there comes the second with current correctly
+ * pointing to buffer 1 this time. But sometimes this second interrupt
+ * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
+ * the channel seems to prevent the channel from hanging, but it doesn't
+ * prevent the spurious interrupt. This might also be unsafe. Think
+ * about the IDMAC controller trying to switch to a buffer, when we
+ * clear the ready bit, and re-enable it a moment later.
+ */
+ reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
+ idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
+ idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
+
+ reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
+ idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
+ idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
+
+ spin_unlock_irqrestore(&ipu->lock, flags);
+
+ return 0;
+}
+
+/*
+ * We have several possibilities here:
+ * current BUF next BUF
+ *
+ * not last sg next not last sg
+ * not last sg next last sg
+ * last sg first sg from next descriptor
+ * last sg NULL
+ *
+ * Besides, the descriptor queue might be empty or not. We process all these
+ * cases carefully.
+ */
+static irqreturn_t idmac_interrupt(int irq, void *dev_id)
+{
+ struct idmac_channel *ichan = dev_id;
+ unsigned int chan_id = ichan->dma_chan.chan_id;
+ struct scatterlist **sg, *sgnext, *sgnew = NULL;
+ /* Next transfer descriptor */
+ struct idmac_tx_desc *desc = NULL, *descnew;
+ dma_async_tx_callback callback;
+ void *callback_param;
+ bool done = false;
+ u32 ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY),
+ ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY),
+ curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+
+ /* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */
+
+ pr_debug("IDMAC irq %d\n", irq);
+ /* Other interrupts do not interfere with this channel */
+ spin_lock(&ichan->lock);
+
+ if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
+ ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+ int i = 100;
+
+ /* This doesn't help. See comment in ipu_disable_channel() */
+ while (--i) {
+ curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+ if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
+ break;
+ cpu_relax();
+ }
+
+ if (!i) {
+ spin_unlock(&ichan->lock);
+ dev_dbg(ichan->dma_chan.device->dev,
+ "IRQ on active buffer on channel %x, active "
+ "%d, ready %x, %x, current %x!\n", chan_id,
+ ichan->active_buffer, ready0, ready1, curbuf);
+ return IRQ_NONE;
+ }
+ }
+
+ if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
+ (!ichan->active_buffer && (ready0 >> chan_id) & 1)
+ )) {
+ spin_unlock(&ichan->lock);
+ dev_dbg(ichan->dma_chan.device->dev,
+ "IRQ with active buffer still ready on channel %x, "
+ "active %d, ready %x, %x!\n", chan_id,
+ ichan->active_buffer, ready0, ready1);
+ return IRQ_NONE;
+ }
+
+ if (unlikely(list_empty(&ichan->queue))) {
+ spin_unlock(&ichan->lock);
+ dev_err(ichan->dma_chan.device->dev,
+ "IRQ without queued buffers on channel %x, active %d, "
+ "ready %x, %x!\n", chan_id,
+ ichan->active_buffer, ready0, ready1);
+ return IRQ_NONE;
+ }
+
+ /*
+ * active_buffer is a software flag, it shows which buffer we are
+ * currently expecting back from the hardware, IDMAC should be
+ * processing the other buffer already
+ */
+ sg = &ichan->sg[ichan->active_buffer];
+ sgnext = ichan->sg[!ichan->active_buffer];
+
+ /*
+ * if sgnext == NULL sg must be the last element in a scatterlist and
+ * queue must be empty
+ */
+ if (unlikely(!sgnext)) {
+ if (unlikely(sg_next(*sg))) {
+ dev_err(ichan->dma_chan.device->dev,
+ "Broken buffer-update locking on channel %x!\n",
+ chan_id);
+ /* We'll let the user catch up */
+ } else {
+ /* Underrun */
+ ipu_ic_disable_task(&ipu_data, chan_id);
+ dev_dbg(ichan->dma_chan.device->dev,
+ "Underrun on channel %x\n", chan_id);
+ ichan->status = IPU_CHANNEL_READY;
+ /* Continue to check for complete descriptor */
+ }
+ }
+
+ desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list);
+
+ /* First calculate and submit the next sg element */
+ if (likely(sgnext))
+ sgnew = sg_next(sgnext);
+
+ if (unlikely(!sgnew)) {
+ /* Start a new scatterlist, if any queued */
+ if (likely(desc->list.next != &ichan->queue)) {
+ descnew = list_entry(desc->list.next,
+ struct idmac_tx_desc, list);
+ sgnew = &descnew->sg[0];
+ }
+ }
+
+ if (unlikely(!sg_next(*sg)) || !sgnext) {
+ /*
+ * Last element in scatterlist done, remove from the queue,
+ * _init for debugging
+ */
+ list_del_init(&desc->list);
+ done = true;
+ }
+
+ *sg = sgnew;
+
+ if (likely(sgnew)) {
+ int ret;
+
+ ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer,
+ sg_dma_address(*sg));
+ if (ret < 0)
+ dev_err(ichan->dma_chan.device->dev,
+ "Failed to update buffer on channel %x buffer %d!\n",
+ chan_id, ichan->active_buffer);
+ else
+ ipu_select_buffer(chan_id, ichan->active_buffer);
+ }
+
+ /* Flip the active buffer - even if update above failed */
+ ichan->active_buffer = !ichan->active_buffer;
+ if (done)
+ ichan->completed = desc->txd.cookie;
+
+ callback = desc->txd.callback;
+ callback_param = desc->txd.callback_param;
+
+ spin_unlock(&ichan->lock);
+
+ if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback)
+ callback(callback_param);
+
+ return IRQ_HANDLED;
+}
+
+static void ipu_gc_tasklet(unsigned long arg)
+{
+ struct ipu *ipu = (struct ipu *)arg;
+ int i;
+
+ for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+ struct idmac_channel *ichan = ipu->channel + i;
+ struct idmac_tx_desc *desc;
+ unsigned long flags;
+ int j;
+
+ for (j = 0; j < ichan->n_tx_desc; j++) {
+ desc = ichan->desc + j;
+ spin_lock_irqsave(&ichan->lock, flags);
+ if (async_tx_test_ack(&desc->txd)) {
+ list_move(&desc->list, &ichan->free_list);
+ async_tx_clear_ack(&desc->txd);
+ }
+ spin_unlock_irqrestore(&ichan->lock, flags);
+ }
+ }
+}
+
+/*
+ * At the time .device_alloc_chan_resources() method is called, we cannot know,
+ * whether the client will accept the channel. Thus we must only check, if we
+ * can satisfy client's request but the only real criterion to verify, whether
+ * the client has accepted our offer is the client_count. That's why we have to
+ * perform the rest of our allocation tasks on the first call to this function.
+ */
+static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_data_direction direction, unsigned long tx_flags)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+ struct idmac_tx_desc *desc = NULL;
+ struct dma_async_tx_descriptor *txd = NULL;
+ unsigned long flags;
+
+ /* We only can handle these three channels so far */
+ if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 &&
+ ichan->dma_chan.chan_id != IDMAC_IC_7)
+ return NULL;
+
+ if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) {
+ dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction);
+ return NULL;
+ }
+
+ mutex_lock(&ichan->chan_mutex);
+
+ spin_lock_irqsave(&ichan->lock, flags);
+ if (!list_empty(&ichan->free_list)) {
+ desc = list_entry(ichan->free_list.next,
+ struct idmac_tx_desc, list);
+
+ list_del_init(&desc->list);
+
+ desc->sg_len = sg_len;
+ desc->sg = sgl;
+ txd = &desc->txd;
+ txd->flags = tx_flags;
+ }
+ spin_unlock_irqrestore(&ichan->lock, flags);
+
+ mutex_unlock(&ichan->chan_mutex);
+
+ tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet);
+
+ return txd;
+}
+
+/* Re-select the current buffer and re-activate the channel */
+static void idmac_issue_pending(struct dma_chan *chan)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+ struct idmac *idmac = to_idmac(chan->device);
+ struct ipu *ipu = to_ipu(idmac);
+ unsigned long flags;
+
+ /* This is not always needed, but doesn't hurt either */
+ spin_lock_irqsave(&ipu->lock, flags);
+ ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer);
+ spin_unlock_irqrestore(&ipu->lock, flags);
+
+ /*
+ * Might need to perform some parts of initialisation from
+ * ipu_enable_channel(), but not all, we do not want to reset to buffer
+ * 0, don't need to set priority again either, but re-enabling the task
+ * and the channel might be a good idea.
+ */
+}
+
+static void __idmac_terminate_all(struct dma_chan *chan)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+ struct idmac *idmac = to_idmac(chan->device);
+ unsigned long flags;
+ int i;
+
+ ipu_disable_channel(idmac, ichan,
+ ichan->status >= IPU_CHANNEL_ENABLED);
+
+ tasklet_disable(&to_ipu(idmac)->tasklet);
+
+ /* ichan->queue is modified in ISR, have to spinlock */
+ spin_lock_irqsave(&ichan->lock, flags);
+ list_splice_init(&ichan->queue, &ichan->free_list);
+
+ if (ichan->desc)
+ for (i = 0; i < ichan->n_tx_desc; i++) {
+ struct idmac_tx_desc *desc = ichan->desc + i;
+ if (list_empty(&desc->list))
+ /* Descriptor was prepared, but not submitted */
+ list_add(&desc->list,
+ &ichan->free_list);
+
+ async_tx_clear_ack(&desc->txd);
+ }
+
+ ichan->sg[0] = NULL;
+ ichan->sg[1] = NULL;
+ spin_unlock_irqrestore(&ichan->lock, flags);
+
+ tasklet_enable(&to_ipu(idmac)->tasklet);
+
+ ichan->status = IPU_CHANNEL_INITIALIZED;
+}
+
+static void idmac_terminate_all(struct dma_chan *chan)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+
+ mutex_lock(&ichan->chan_mutex);
+
+ __idmac_terminate_all(chan);
+
+ mutex_unlock(&ichan->chan_mutex);
+}
+
+static int idmac_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+ struct idmac *idmac = to_idmac(chan->device);
+ int ret;
+
+ /* dmaengine.c now guarantees to only offer free channels */
+ BUG_ON(chan->client_count > 1);
+ WARN_ON(ichan->status != IPU_CHANNEL_FREE);
+
+ chan->cookie = 1;
+ ichan->completed = -ENXIO;
+
+ ret = ipu_irq_map(ichan->dma_chan.chan_id);
+ if (ret < 0)
+ goto eimap;
+
+ ichan->eof_irq = ret;
+ ret = request_irq(ichan->eof_irq, idmac_interrupt, 0,
+ ichan->eof_name, ichan);
+ if (ret < 0)
+ goto erirq;
+
+ ret = ipu_init_channel(idmac, ichan);
+ if (ret < 0)
+ goto eichan;
+
+ ichan->status = IPU_CHANNEL_INITIALIZED;
+
+ dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n",
+ ichan->dma_chan.chan_id, ichan->eof_irq);
+
+ return ret;
+
+eichan:
+ free_irq(ichan->eof_irq, ichan);
+erirq:
+ ipu_irq_unmap(ichan->dma_chan.chan_id);
+eimap:
+ return ret;
+}
+
+static void idmac_free_chan_resources(struct dma_chan *chan)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+ struct idmac *idmac = to_idmac(chan->device);
+
+ mutex_lock(&ichan->chan_mutex);
+
+ __idmac_terminate_all(chan);
+
+ if (ichan->status > IPU_CHANNEL_FREE) {
+ free_irq(ichan->eof_irq, ichan);
+ ipu_irq_unmap(ichan->dma_chan.chan_id);
+ }
+
+ ichan->status = IPU_CHANNEL_FREE;
+
+ ipu_uninit_channel(idmac, ichan);
+
+ mutex_unlock(&ichan->chan_mutex);
+
+ tasklet_schedule(&to_ipu(idmac)->tasklet);
+}
+
+static enum dma_status idmac_is_tx_complete(struct dma_chan *chan,
+ dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct idmac_channel *ichan = to_idmac_chan(chan);
+
+ if (done)
+ *done = ichan->completed;
+ if (used)
+ *used = chan->cookie;
+ if (cookie != chan->cookie)
+ return DMA_ERROR;
+ return DMA_SUCCESS;
+}
+
+static int __init ipu_idmac_init(struct ipu *ipu)
+{
+ struct idmac *idmac = &ipu->idmac;
+ struct dma_device *dma = &idmac->dma;
+ int i;
+
+ dma_cap_set(DMA_SLAVE, dma->cap_mask);
+ dma_cap_set(DMA_PRIVATE, dma->cap_mask);
+
+ /* Compulsory common fields */
+ dma->dev = ipu->dev;
+ dma->device_alloc_chan_resources = idmac_alloc_chan_resources;
+ dma->device_free_chan_resources = idmac_free_chan_resources;
+ dma->device_is_tx_complete = idmac_is_tx_complete;
+ dma->device_issue_pending = idmac_issue_pending;
+
+ /* Compulsory for DMA_SLAVE fields */
+ dma->device_prep_slave_sg = idmac_prep_slave_sg;
+ dma->device_terminate_all = idmac_terminate_all;
+
+ INIT_LIST_HEAD(&dma->channels);
+ for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+ struct idmac_channel *ichan = ipu->channel + i;
+ struct dma_chan *dma_chan = &ichan->dma_chan;
+
+ spin_lock_init(&ichan->lock);
+ mutex_init(&ichan->chan_mutex);
+
+ ichan->status = IPU_CHANNEL_FREE;
+ ichan->sec_chan_en = false;
+ ichan->completed = -ENXIO;
+ snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i);
+
+ dma_chan->device = &idmac->dma;
+ dma_chan->cookie = 1;
+ dma_chan->chan_id = i;
+ list_add_tail(&ichan->dma_chan.device_node, &dma->channels);
+ }
+
+ idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF);
+
+ return dma_async_device_register(&idmac->dma);
+}
+
+static void ipu_idmac_exit(struct ipu *ipu)
+{
+ int i;
+ struct idmac *idmac = &ipu->idmac;
+
+ for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+ struct idmac_channel *ichan = ipu->channel + i;
+
+ idmac_terminate_all(&ichan->dma_chan);
+ idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
+ }
+
+ dma_async_device_unregister(&idmac->dma);
+}
+
+/*****************************************************************************
+ * IPU common probe / remove
+ */
+
+static int ipu_probe(struct platform_device *pdev)
+{
+ struct ipu_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *mem_ipu, *mem_ic;
+ int ret;
+
+ spin_lock_init(&ipu_data.lock);
+
+ mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!pdata || !mem_ipu || !mem_ic)
+ return -EINVAL;
+
+ ipu_data.dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, &ipu_data);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_noirq;
+
+ ipu_data.irq_fn = ret;
+ ret = platform_get_irq(pdev, 1);
+ if (ret < 0)
+ goto err_noirq;
+
+ ipu_data.irq_err = ret;
+ ipu_data.irq_base = pdata->irq_base;
+
+ dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
+ ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+
+ /* Remap IPU common registers */
+ ipu_data.reg_ipu = ioremap(mem_ipu->start,
+ mem_ipu->end - mem_ipu->start + 1);
+ if (!ipu_data.reg_ipu) {
+ ret = -ENOMEM;
+ goto err_ioremap_ipu;
+ }
+
+ /* Remap Image Converter and Image DMA Controller registers */
+ ipu_data.reg_ic = ioremap(mem_ic->start,
+ mem_ic->end - mem_ic->start + 1);
+ if (!ipu_data.reg_ic) {
+ ret = -ENOMEM;
+ goto err_ioremap_ic;
+ }
+
+ /* Get IPU clock */
+ ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+ if (IS_ERR(ipu_data.ipu_clk)) {
+ ret = PTR_ERR(ipu_data.ipu_clk);
+ goto err_clk_get;
+ }
+
+ /* Make sure IPU HSP clock is running */
+ clk_enable(ipu_data.ipu_clk);
+
+ /* Disable all interrupts */
+ idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
+ idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2);
+ idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3);
+ idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4);
+ idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5);
+
+ dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name,
+ (unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err);
+
+ ret = ipu_irq_attach_irq(&ipu_data, pdev);
+ if (ret < 0)
+ goto err_attach_irq;
+
+ /* Initialize DMA engine */
+ ret = ipu_idmac_init(&ipu_data);
+ if (ret < 0)
+ goto err_idmac_init;
+
+ tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data);
+
+ ipu_data.dev = &pdev->dev;
+
+ dev_dbg(ipu_data.dev, "IPU initialized\n");
+
+ return 0;
+
+err_idmac_init:
+err_attach_irq:
+ ipu_irq_detach_irq(&ipu_data, pdev);
+ clk_disable(ipu_data.ipu_clk);
+ clk_put(ipu_data.ipu_clk);
+err_clk_get:
+ iounmap(ipu_data.reg_ic);
+err_ioremap_ic:
+ iounmap(ipu_data.reg_ipu);
+err_ioremap_ipu:
+err_noirq:
+ dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret);
+ return ret;
+}
+
+static int ipu_remove(struct platform_device *pdev)
+{
+ struct ipu *ipu = platform_get_drvdata(pdev);
+
+ ipu_idmac_exit(ipu);
+ ipu_irq_detach_irq(ipu, pdev);
+ clk_disable(ipu->ipu_clk);
+ clk_put(ipu->ipu_clk);
+ iounmap(ipu->reg_ic);
+ iounmap(ipu->reg_ipu);
+ tasklet_kill(&ipu->tasklet);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+/*
+ * We need two MEM resources - with IPU-common and Image Converter registers,
+ * including PF_CONF and IDMAC_* registers, and two IRQs - function and error
+ */
+static struct platform_driver ipu_platform_driver = {
+ .driver = {
+ .name = "ipu-core",
+ .owner = THIS_MODULE,
+ },
+ .remove = ipu_remove,
+};
+
+static int __init ipu_init(void)
+{
+ return platform_driver_probe(&ipu_platform_driver, ipu_probe);
+}
+subsys_initcall(ipu_init);
+
+MODULE_DESCRIPTION("IPU core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
+MODULE_ALIAS("platform:ipu-core");
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_INTERN_H_
+#define _IPU_INTERN_H_
+
+#include <linux/dmaengine.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+/* IPU Common registers */
+#define IPU_CONF 0x00
+#define IPU_CHA_BUF0_RDY 0x04
+#define IPU_CHA_BUF1_RDY 0x08
+#define IPU_CHA_DB_MODE_SEL 0x0C
+#define IPU_CHA_CUR_BUF 0x10
+#define IPU_FS_PROC_FLOW 0x14
+#define IPU_FS_DISP_FLOW 0x18
+#define IPU_TASKS_STAT 0x1C
+#define IPU_IMA_ADDR 0x20
+#define IPU_IMA_DATA 0x24
+#define IPU_INT_CTRL_1 0x28
+#define IPU_INT_CTRL_2 0x2C
+#define IPU_INT_CTRL_3 0x30
+#define IPU_INT_CTRL_4 0x34
+#define IPU_INT_CTRL_5 0x38
+#define IPU_INT_STAT_1 0x3C
+#define IPU_INT_STAT_2 0x40
+#define IPU_INT_STAT_3 0x44
+#define IPU_INT_STAT_4 0x48
+#define IPU_INT_STAT_5 0x4C
+#define IPU_BRK_CTRL_1 0x50
+#define IPU_BRK_CTRL_2 0x54
+#define IPU_BRK_STAT 0x58
+#define IPU_DIAGB_CTRL 0x5C
+
+/* IPU_CONF Register bits */
+#define IPU_CONF_CSI_EN 0x00000001
+#define IPU_CONF_IC_EN 0x00000002
+#define IPU_CONF_ROT_EN 0x00000004
+#define IPU_CONF_PF_EN 0x00000008
+#define IPU_CONF_SDC_EN 0x00000010
+#define IPU_CONF_ADC_EN 0x00000020
+#define IPU_CONF_DI_EN 0x00000040
+#define IPU_CONF_DU_EN 0x00000080
+#define IPU_CONF_PXL_ENDIAN 0x00000100
+
+/* Image Converter Registers */
+#define IC_CONF 0x88
+#define IC_PRP_ENC_RSC 0x8C
+#define IC_PRP_VF_RSC 0x90
+#define IC_PP_RSC 0x94
+#define IC_CMBP_1 0x98
+#define IC_CMBP_2 0x9C
+#define PF_CONF 0xA0
+#define IDMAC_CONF 0xA4
+#define IDMAC_CHA_EN 0xA8
+#define IDMAC_CHA_PRI 0xAC
+#define IDMAC_CHA_BUSY 0xB0
+
+/* Image Converter Register bits */
+#define IC_CONF_PRPENC_EN 0x00000001
+#define IC_CONF_PRPENC_CSC1 0x00000002
+#define IC_CONF_PRPENC_ROT_EN 0x00000004
+#define IC_CONF_PRPVF_EN 0x00000100
+#define IC_CONF_PRPVF_CSC1 0x00000200
+#define IC_CONF_PRPVF_CSC2 0x00000400
+#define IC_CONF_PRPVF_CMB 0x00000800
+#define IC_CONF_PRPVF_ROT_EN 0x00001000
+#define IC_CONF_PP_EN 0x00010000
+#define IC_CONF_PP_CSC1 0x00020000
+#define IC_CONF_PP_CSC2 0x00040000
+#define IC_CONF_PP_CMB 0x00080000
+#define IC_CONF_PP_ROT_EN 0x00100000
+#define IC_CONF_IC_GLB_LOC_A 0x10000000
+#define IC_CONF_KEY_COLOR_EN 0x20000000
+#define IC_CONF_RWS_EN 0x40000000
+#define IC_CONF_CSI_MEM_WR_EN 0x80000000
+
+#define IDMA_CHAN_INVALID 0x000000FF
+#define IDMA_IC_0 0x00000001
+#define IDMA_IC_1 0x00000002
+#define IDMA_IC_2 0x00000004
+#define IDMA_IC_3 0x00000008
+#define IDMA_IC_4 0x00000010
+#define IDMA_IC_5 0x00000020
+#define IDMA_IC_6 0x00000040
+#define IDMA_IC_7 0x00000080
+#define IDMA_IC_8 0x00000100
+#define IDMA_IC_9 0x00000200
+#define IDMA_IC_10 0x00000400
+#define IDMA_IC_11 0x00000800
+#define IDMA_IC_12 0x00001000
+#define IDMA_IC_13 0x00002000
+#define IDMA_SDC_BG 0x00004000
+#define IDMA_SDC_FG 0x00008000
+#define IDMA_SDC_MASK 0x00010000
+#define IDMA_SDC_PARTIAL 0x00020000
+#define IDMA_ADC_SYS1_WR 0x00040000
+#define IDMA_ADC_SYS2_WR 0x00080000
+#define IDMA_ADC_SYS1_CMD 0x00100000
+#define IDMA_ADC_SYS2_CMD 0x00200000
+#define IDMA_ADC_SYS1_RD 0x00400000
+#define IDMA_ADC_SYS2_RD 0x00800000
+#define IDMA_PF_QP 0x01000000
+#define IDMA_PF_BSP 0x02000000
+#define IDMA_PF_Y_IN 0x04000000
+#define IDMA_PF_U_IN 0x08000000
+#define IDMA_PF_V_IN 0x10000000
+#define IDMA_PF_Y_OUT 0x20000000
+#define IDMA_PF_U_OUT 0x40000000
+#define IDMA_PF_V_OUT 0x80000000
+
+#define TSTAT_PF_H264_PAUSE 0x00000001
+#define TSTAT_CSI2MEM_MASK 0x0000000C
+#define TSTAT_CSI2MEM_OFFSET 2
+#define TSTAT_VF_MASK 0x00000600
+#define TSTAT_VF_OFFSET 9
+#define TSTAT_VF_ROT_MASK 0x000C0000
+#define TSTAT_VF_ROT_OFFSET 18
+#define TSTAT_ENC_MASK 0x00000180
+#define TSTAT_ENC_OFFSET 7
+#define TSTAT_ENC_ROT_MASK 0x00030000
+#define TSTAT_ENC_ROT_OFFSET 16
+#define TSTAT_PP_MASK 0x00001800
+#define TSTAT_PP_OFFSET 11
+#define TSTAT_PP_ROT_MASK 0x00300000
+#define TSTAT_PP_ROT_OFFSET 20
+#define TSTAT_PF_MASK 0x00C00000
+#define TSTAT_PF_OFFSET 22
+#define TSTAT_ADCSYS1_MASK 0x03000000
+#define TSTAT_ADCSYS1_OFFSET 24
+#define TSTAT_ADCSYS2_MASK 0x0C000000
+#define TSTAT_ADCSYS2_OFFSET 26
+
+#define TASK_STAT_IDLE 0
+#define TASK_STAT_ACTIVE 1
+#define TASK_STAT_WAIT4READY 2
+
+struct idmac {
+ struct dma_device dma;
+};
+
+struct ipu {
+ void __iomem *reg_ipu;
+ void __iomem *reg_ic;
+ unsigned int irq_fn; /* IPU Function IRQ to the CPU */
+ unsigned int irq_err; /* IPU Error IRQ to the CPU */
+ unsigned int irq_base; /* Beginning of the IPU IRQ range */
+ unsigned long channel_init_mask;
+ spinlock_t lock;
+ struct clk *ipu_clk;
+ struct device *dev;
+ struct idmac idmac;
+ struct idmac_channel channel[IPU_CHANNELS_NUM];
+ struct tasklet_struct tasklet;
+};
+
+#define to_idmac(d) container_of(d, struct idmac, dma)
+
+extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev);
+extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev);
+
+extern bool ipu_irq_status(uint32_t irq);
+extern int ipu_irq_map(unsigned int source);
+extern int ipu_irq_unmap(unsigned int source);
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+/*
+ * Register read / write - shall be inlined by the compiler
+ */
+static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg)
+{
+ return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+ __raw_writel(value, ipu->reg_ipu + reg);
+}
+
+
+/*
+ * IPU IRQ chip driver
+ */
+
+#define IPU_IRQ_NR_FN_BANKS 3
+#define IPU_IRQ_NR_ERR_BANKS 2
+#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS)
+
+struct ipu_irq_bank {
+ unsigned int control;
+ unsigned int status;
+ spinlock_t lock;
+ struct ipu *ipu;
+};
+
+static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = {
+ /* 3 groups of functional interrupts */
+ {
+ .control = IPU_INT_CTRL_1,
+ .status = IPU_INT_STAT_1,
+ }, {
+ .control = IPU_INT_CTRL_2,
+ .status = IPU_INT_STAT_2,
+ }, {
+ .control = IPU_INT_CTRL_3,
+ .status = IPU_INT_STAT_3,
+ },
+ /* 2 groups of error interrupts */
+ {
+ .control = IPU_INT_CTRL_4,
+ .status = IPU_INT_STAT_4,
+ }, {
+ .control = IPU_INT_CTRL_5,
+ .status = IPU_INT_STAT_5,
+ },
+};
+
+struct ipu_irq_map {
+ unsigned int irq;
+ int source;
+ struct ipu_irq_bank *bank;
+ struct ipu *ipu;
+};
+
+static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS];
+/* Protects allocations from the above array of maps */
+static DEFINE_MUTEX(map_lock);
+/* Protects register accesses and individual mappings */
+static DEFINE_SPINLOCK(bank_lock);
+
+static struct ipu_irq_map *src2map(unsigned int src)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++)
+ if (irq_map[i].source == src)
+ return irq_map + i;
+
+ return NULL;
+}
+
+static void ipu_irq_unmask(unsigned int irq)
+{
+ struct ipu_irq_map *map = get_irq_chip_data(irq);
+ struct ipu_irq_bank *bank;
+ uint32_t reg;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&bank_lock, lock_flags);
+
+ bank = map->bank;
+ if (!bank) {
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+ pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+ return;
+ }
+
+ reg = ipu_read_reg(bank->ipu, bank->control);
+ reg |= (1UL << (map->source & 31));
+ ipu_write_reg(bank->ipu, reg, bank->control);
+
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_mask(unsigned int irq)
+{
+ struct ipu_irq_map *map = get_irq_chip_data(irq);
+ struct ipu_irq_bank *bank;
+ uint32_t reg;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&bank_lock, lock_flags);
+
+ bank = map->bank;
+ if (!bank) {
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+ pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+ return;
+ }
+
+ reg = ipu_read_reg(bank->ipu, bank->control);
+ reg &= ~(1UL << (map->source & 31));
+ ipu_write_reg(bank->ipu, reg, bank->control);
+
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_ack(unsigned int irq)
+{
+ struct ipu_irq_map *map = get_irq_chip_data(irq);
+ struct ipu_irq_bank *bank;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&bank_lock, lock_flags);
+
+ bank = map->bank;
+ if (!bank) {
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+ pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+ return;
+ }
+
+ ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status);
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+/**
+ * ipu_irq_status() - returns the current interrupt status of the specified IRQ.
+ * @irq: interrupt line to get status for.
+ * @return: true if the interrupt is pending/asserted or false if the
+ * interrupt is not pending.
+ */
+bool ipu_irq_status(unsigned int irq)
+{
+ struct ipu_irq_map *map = get_irq_chip_data(irq);
+ struct ipu_irq_bank *bank;
+ unsigned long lock_flags;
+ bool ret;
+
+ spin_lock_irqsave(&bank_lock, lock_flags);
+ bank = map->bank;
+ ret = bank && ipu_read_reg(bank->ipu, bank->status) &
+ (1UL << (map->source & 31));
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+ return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source: interrupt source bit position (see below)
+ * @return: mapped IRQ number or negative error code
+ *
+ * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ
+ * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17.
+ * However, the source argument of this function is not the sequence number of
+ * the possible IRQ, but rather its bit position. So, first interrupt in fourth
+ * register has source number 96, and not 88. This makes calculations easier,
+ * and also provides forward compatibility with any future IPU implementations
+ * with any interrupt bit assignments.
+ */
+int ipu_irq_map(unsigned int source)
+{
+ int i, ret = -ENOMEM;
+ struct ipu_irq_map *map;
+
+ might_sleep();
+
+ mutex_lock(&map_lock);
+ map = src2map(source);
+ if (map) {
+ pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+ if (irq_map[i].source < 0) {
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&bank_lock, lock_flags);
+ irq_map[i].source = source;
+ irq_map[i].bank = irq_bank + source / 32;
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+ ret = irq_map[i].irq;
+ pr_debug("IPU: mapped source %u to IRQ %u\n",
+ source, ret);
+ break;
+ }
+ }
+out:
+ mutex_unlock(&map_lock);
+
+ if (ret < 0)
+ pr_err("IPU: couldn't map source %u: %d\n", source, ret);
+
+ return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source: interrupt source bit position (see ipu_irq_map())
+ * @return: 0 or negative error code
+ */
+int ipu_irq_unmap(unsigned int source)
+{
+ int i, ret = -EINVAL;
+
+ might_sleep();
+
+ mutex_lock(&map_lock);
+ for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+ if (irq_map[i].source == source) {
+ unsigned long lock_flags;
+
+ pr_debug("IPU: unmapped source %u from IRQ %u\n",
+ source, irq_map[i].irq);
+
+ spin_lock_irqsave(&bank_lock, lock_flags);
+ irq_map[i].source = -EINVAL;
+ irq_map[i].bank = NULL;
+ spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+ ret = 0;
+ break;
+ }
+ }
+ mutex_unlock(&map_lock);
+
+ return ret;
+}
+
+/* Chained IRQ handler for IPU error interrupt */
+static void ipu_irq_err(unsigned int irq, struct irq_desc *desc)
+{
+ struct ipu *ipu = get_irq_data(irq);
+ u32 status;
+ int i, line;
+
+ for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
+ struct ipu_irq_bank *bank = irq_bank + i;
+
+ spin_lock(&bank_lock);
+ status = ipu_read_reg(ipu, bank->status);
+ /*
+ * Don't think we have to clear all interrupts here, they will
+ * be acked by ->handle_irq() (handle_level_irq). However, we
+ * might want to clear unhandled interrupts after the loop...
+ */
+ status &= ipu_read_reg(ipu, bank->control);
+ spin_unlock(&bank_lock);
+ while ((line = ffs(status))) {
+ struct ipu_irq_map *map;
+
+ line--;
+ status &= ~(1UL << line);
+
+ spin_lock(&bank_lock);
+ map = src2map(32 * i + line);
+ if (map)
+ irq = map->irq;
+ spin_unlock(&bank_lock);
+
+ if (!map) {
+ pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+ line, i);
+ continue;
+ }
+ generic_handle_irq(irq);
+ }
+ }
+}
+
+/* Chained IRQ handler for IPU function interrupt */
+static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc)
+{
+ struct ipu *ipu = get_irq_data(irq);
+ u32 status;
+ int i, line;
+
+ for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) {
+ struct ipu_irq_bank *bank = irq_bank + i;
+
+ spin_lock(&bank_lock);
+ status = ipu_read_reg(ipu, bank->status);
+ /* Not clearing all interrupts, see above */
+ status &= ipu_read_reg(ipu, bank->control);
+ spin_unlock(&bank_lock);
+ while ((line = ffs(status))) {
+ struct ipu_irq_map *map;
+
+ line--;
+ status &= ~(1UL << line);
+
+ spin_lock(&bank_lock);
+ map = src2map(32 * i + line);
+ if (map)
+ irq = map->irq;
+ spin_unlock(&bank_lock);
+
+ if (!map) {
+ pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+ line, i);
+ continue;
+ }
+ generic_handle_irq(irq);
+ }
+ }
+}
+
+static struct irq_chip ipu_irq_chip = {
+ .name = "ipu_irq",
+ .ack = ipu_irq_ack,
+ .mask = ipu_irq_mask,
+ .unmask = ipu_irq_unmask,
+};
+
+/* Install the IRQ handler */
+int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+ struct ipu_platform_data *pdata = dev->dev.platform_data;
+ unsigned int irq, irq_base, i;
+
+ irq_base = pdata->irq_base;
+
+ for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
+ irq_bank[i].ipu = ipu;
+
+ for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+ int ret;
+
+ irq = irq_base + i;
+ ret = set_irq_chip(irq, &ipu_irq_chip);
+ if (ret < 0)
+ return ret;
+ ret = set_irq_chip_data(irq, irq_map + i);
+ if (ret < 0)
+ return ret;
+ irq_map[i].ipu = ipu;
+ irq_map[i].irq = irq;
+ irq_map[i].source = -EINVAL;
+ set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+ }
+
+ set_irq_data(ipu->irq_fn, ipu);
+ set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn);
+
+ set_irq_data(ipu->irq_err, ipu);
+ set_irq_chained_handler(ipu->irq_err, ipu_irq_err);
+
+ return 0;
+}
+
+void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+ struct ipu_platform_data *pdata = dev->dev.platform_data;
+ unsigned int irq, irq_base;
+
+ irq_base = pdata->irq_base;
+
+ set_irq_chained_handler(ipu->irq_fn, NULL);
+ set_irq_data(ipu->irq_fn, NULL);
+
+ set_irq_chained_handler(ipu->irq_err, NULL);
+ set_irq_data(ipu->irq_err, NULL);
+
+ for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip(irq, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
struct csrow_info *csrow = &mci->csrows[0];
unsigned long address, pfn, offset, syndrome;
- dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n",
+ dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
priv->node, chan, ar);
/* Address decoding is likely a bit bogus, to dbl check */
struct csrow_info *csrow = &mci->csrows[0];
unsigned long address, pfn, offset;
- dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n",
+ dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
priv->node, chan, ar);
/* Address decoding is likely a bit bogus, to dbl check */
/* Get channel population */
reg = in_be64(®s->mic_mnt_cfg);
- dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
+ dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
chanmask = 0;
if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
chanmask |= 0x1;
"Yuck ! No channel populated ? Aborting !\n");
return -ENODEV;
}
- dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n",
+ dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
in_be64(®s->mic_fir));
/* Allocate & init EDAC MC data structure */
root_id = root_node->node_id;
grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
- if (card->bm_generation + 1 == generation ||
+ if (is_next_generation(generation, card->bm_generation) ||
(card->bm_generation != generation && grace)) {
/*
* This first step is to figure out who is IRM and
fw_core_initiate_bus_reset(card, 1);
mutex_lock(&card_mutex);
- list_del(&card->link);
+ list_del_init(&card->link);
mutex_unlock(&card_mutex);
/* Set up the dummy driver. */
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/idr.h>
+#include <linux/jiffies.h>
#include <linux/string.h>
#include <linux/rwsem.h>
#include <linux/semaphore.h>
return device;
}
+/*
+ * These defines control the retry behavior for reading the config
+ * rom. It shouldn't be necessary to tweak these; if the device
+ * doesn't respond to a config rom read within 10 seconds, it's not
+ * going to respond at all. As for the initial delay, a lot of
+ * devices will be able to respond within half a second after bus
+ * reset. On the other hand, it's not really worth being more
+ * aggressive than that, since it scales pretty well; if 10 devices
+ * are plugged in, they're all getting read within one second.
+ */
+
+#define MAX_RETRIES 10
+#define RETRY_DELAY (3 * HZ)
+#define INITIAL_DELAY (HZ / 2)
+#define SHUTDOWN_DELAY (2 * HZ)
+
static void fw_device_shutdown(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
int minor = MINOR(device->device.devt);
+ if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
+ && !list_empty(&device->card->link)) {
+ schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+ return;
+ }
+
+ if (atomic_cmpxchg(&device->state,
+ FW_DEVICE_GONE,
+ FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
+ return;
+
fw_device_cdev_remove(device);
device_for_each_child(&device->device, NULL, shutdown_unit);
device_unregister(&device->device);
down_write(&fw_device_rwsem);
idr_remove(&fw_device_idr, minor);
up_write(&fw_device_rwsem);
+
fw_device_put(device);
}
.release = fw_device_release,
};
+static void fw_device_update(struct work_struct *work);
+
/*
- * These defines control the retry behavior for reading the config
- * rom. It shouldn't be necessary to tweak these; if the device
- * doesn't respond to a config rom read within 10 seconds, it's not
- * going to respond at all. As for the initial delay, a lot of
- * devices will be able to respond within half a second after bus
- * reset. On the other hand, it's not really worth being more
- * aggressive than that, since it scales pretty well; if 10 devices
- * are plugged in, they're all getting read within one second.
+ * If a device was pending for deletion because its node went away but its
+ * bus info block and root directory header matches that of a newly discovered
+ * device, revive the existing fw_device.
+ * The newly allocated fw_device becomes obsolete instead.
*/
+static int lookup_existing_device(struct device *dev, void *data)
+{
+ struct fw_device *old = fw_device(dev);
+ struct fw_device *new = data;
+ struct fw_card *card = new->card;
+ int match = 0;
+
+ down_read(&fw_device_rwsem); /* serialize config_rom access */
+ spin_lock_irq(&card->lock); /* serialize node access */
+
+ if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
+ atomic_cmpxchg(&old->state,
+ FW_DEVICE_GONE,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+ struct fw_node *current_node = new->node;
+ struct fw_node *obsolete_node = old->node;
+
+ new->node = obsolete_node;
+ new->node->data = new;
+ old->node = current_node;
+ old->node->data = old;
+
+ old->max_speed = new->max_speed;
+ old->node_id = current_node->node_id;
+ smp_wmb(); /* update node_id before generation */
+ old->generation = card->generation;
+ old->config_rom_retries = 0;
+ fw_notify("rediscovered device %s\n", dev_name(dev));
-#define MAX_RETRIES 10
-#define RETRY_DELAY (3 * HZ)
-#define INITIAL_DELAY (HZ / 2)
+ PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+ schedule_delayed_work(&old->work, 0);
+
+ if (current_node == card->root_node)
+ fw_schedule_bm_work(card, 0);
+
+ match = 1;
+ }
+
+ spin_unlock_irq(&card->lock);
+ up_read(&fw_device_rwsem);
+
+ return match;
+}
static void fw_device_init(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
+ struct device *revived_dev;
int minor, err;
/*
return;
}
+ revived_dev = device_find_child(device->card->device,
+ device, lookup_existing_device);
+ if (revived_dev) {
+ put_device(revived_dev);
+ fw_device_release(&device->device);
+
+ return;
+ }
+
device_initialize(&device->device);
fw_device_get(device);
* fw_node_event().
*/
if (atomic_cmpxchg(&device->state,
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
- fw_device_shutdown(work);
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+ PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
} else {
if (device->config_rom_retries)
fw_notify("created device %s: GUID %08x%08x, S%d00, "
case REREAD_BIB_UNCHANGED:
if (atomic_cmpxchg(&device->state,
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
goto gone;
fw_device_update(work);
create_units(device);
if (atomic_cmpxchg(&device->state,
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
goto gone;
fw_notify("refreshed device %s\n", dev_name(&device->device));
give_up:
fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
gone:
- atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
- fw_device_shutdown(work);
+ atomic_set(&device->state, FW_DEVICE_GONE);
+ PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
out:
if (node_id == card->root_node->node_id)
fw_schedule_bm_work(card, 0);
*/
device = node->data;
if (atomic_xchg(&device->state,
- FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
+ FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
- schedule_delayed_work(&device->work, 0);
+ schedule_delayed_work(&device->work,
+ list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
}
break;
}
enum fw_device_state {
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING,
+ FW_DEVICE_GONE,
FW_DEVICE_SHUTDOWN,
};
#define CONTEXT_DEAD 0x0800
#define CONTEXT_ACTIVE 0x0400
-#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES 0xf
#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
for (i = 0; i < 10; i++) {
reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
if ((reg & CONTEXT_ACTIVE) == 0)
- break;
+ return;
- fw_notify("context_stop: still active (0x%08x)\n", reg);
mdelay(1);
}
+ fw_error("Error: DMA context still active (0x%08x)\n", reg);
}
struct driver_data {
int address_high;
unsigned int workarounds;
unsigned int mgt_orb_timeout;
+ unsigned int max_payload;
int dont_block; /* counter for each logical unit */
int blocked; /* ditto */
dma_addr_t page_table_bus;
};
+#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */
+#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */
+
/*
* List of devices with known bugs.
*
* The firmware_revision field, masked with 0xffff00, is the best
* indicator for the type of bridge chip of a device. It yields a few
* false positives but this did not break correctly behaving devices
- * so far. We use ~0 as a wildcard, since the 24 bit values we get
- * from the config rom can never match that.
+ * so far.
*/
static const struct {
u32 firmware_revision;
},
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
},
/* PL-3507 bridge with Prolific firmware */ {
.firmware_revision = 0x012800,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_POWER_CONDITION,
},
/* Symbios bridge */ {
.firmware_revision = 0xa0b800,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
.firmware_revision = 0x002600,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
-
/*
- * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
- * these iPods do not feature the read_capacity bug according
- * to one report. Read_capacity behaviour as well as model_id
- * could change due to Apple-supplied firmware updates though.
+ * iPod 2nd generation: needs 128k max transfer size workaround
+ * iPod 3rd generation: needs fix capacity workaround
*/
-
- /* iPod 4th generation. */ {
+ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000000,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS |
+ SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod 4th generation */ {
.firmware_revision = 0x0a2700,
.model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
continue;
if (sbp2_workarounds_table[i].model != model &&
- sbp2_workarounds_table[i].model != ~0)
+ sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD)
continue;
w |= sbp2_workarounds_table[i].workarounds;
fw_device_get(device);
fw_unit_get(unit);
- /* Initialize to values that won't match anything in our table. */
- firmware_revision = 0xff000000;
- model = 0xff000000;
-
/* implicit directory ID */
tgt->directory_id = ((unit->directory - device->config_rom) * 4
+ CSR_CONFIG_ROM) & 0xffffff;
+ firmware_revision = SBP2_ROM_VALUE_MISSING;
+ model = SBP2_ROM_VALUE_MISSING;
+
if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
&firmware_revision) < 0)
goto fail_tgt_put;
sbp2_init_workarounds(tgt, model, firmware_revision);
+ /*
+ * At S100 we can do 512 bytes per packet, at S200 1024 bytes,
+ * and so on up to 4096 bytes. The SBP-2 max_payload field
+ * specifies the max payload size as 2 ^ (max_payload + 2), so
+ * if we set this to max_speed + 7, we get the right value.
+ */
+ tgt->max_payload = min(device->max_speed + 7, 10U);
+ tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+
/* Do the login in a workqueue so we can easily reschedule retries. */
list_for_each_entry(lu, &tgt->lu_list, link)
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
.id_table = sbp2_id_table,
};
+static void sbp2_unmap_scatterlist(struct device *card_device,
+ struct sbp2_command_orb *orb)
+{
+ if (scsi_sg_count(orb->cmd))
+ dma_unmap_sg(card_device, scsi_sglist(orb->cmd),
+ scsi_sg_count(orb->cmd),
+ orb->cmd->sc_data_direction);
+
+ if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT))
+ dma_unmap_single(card_device, orb->page_table_bus,
+ sizeof(orb->page_table), DMA_TO_DEVICE);
+}
+
static unsigned int
sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
{
dma_unmap_single(device->card->device, orb->base.request_bus,
sizeof(orb->request), DMA_TO_DEVICE);
-
- if (scsi_sg_count(orb->cmd) > 0)
- dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
- scsi_sg_count(orb->cmd),
- orb->cmd->sc_data_direction);
-
- if (orb->page_table_bus != 0)
- dma_unmap_single(device->card->device, orb->page_table_bus,
- sizeof(orb->page_table), DMA_TO_DEVICE);
+ sbp2_unmap_scatterlist(device->card->device, orb);
orb->cmd->result = result;
orb->done(orb->cmd);
struct sbp2_logical_unit *lu = cmd->device->hostdata;
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct sbp2_command_orb *orb;
- unsigned int max_payload;
int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
/*
orb->done = done;
orb->cmd = cmd;
- orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
- /*
- * At speed 100 we can do 512 bytes per packet, at speed 200,
- * 1024 bytes per packet etc. The SBP-2 max_payload field
- * specifies the max payload size as 2 ^ (max_payload + 2), so
- * if we set this to max_speed + 7, we get the right value.
- */
- max_payload = min(device->max_speed + 7,
- device->card->max_receive - 1);
+ orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
orb->request.misc = cpu_to_be32(
- COMMAND_ORB_MAX_PAYLOAD(max_payload) |
+ COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
COMMAND_ORB_SPEED(device->max_speed) |
COMMAND_ORB_NOTIFY);
orb->base.request_bus =
dma_map_single(device->card->device, &orb->request,
sizeof(orb->request), DMA_TO_DEVICE);
- if (dma_mapping_error(device->card->device, orb->base.request_bus))
+ if (dma_mapping_error(device->card->device, orb->base.request_bus)) {
+ sbp2_unmap_scatterlist(device->card->device, orb);
goto out;
+ }
sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation,
lu->command_block_agent_address + SBP2_ORB_POINTER);
struct fw_node *local_node;
unsigned long flags;
+ /*
+ * If the selfID buffer is not the immediate successor of the
+ * previously processed one, we cannot reliably compare the
+ * old and new topologies.
+ */
+ if (!is_next_generation(generation, card->generation) &&
+ card->local_node != NULL) {
+ fw_notify("skipped bus generations, destroying all nodes\n");
+ fw_destroy_nodes(card);
+ card->bm_retries = 0;
+ }
+
spin_lock_irqsave(&card->lock, flags);
card->node_id = node_id;
extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
+/*
+ * Check whether new_generation is the immediate successor of old_generation.
+ * Take counter roll-over at 255 (as per to OHCI) into account.
+ */
+static inline bool is_next_generation(int new_generation, int old_generation)
+{
+ return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+}
+
/*
* The iso packet format allows for an immediate header/payload part
* stored in 'header' immediately after the packet info plus an
{
int size = 0;
if (!pos)
- size = sprintf(buffer, "%s\n", image_type);
+ size = scnprintf(buffer, count, "%s\n", image_type);
return size;
}
int size = 0;
if (!pos) {
spin_lock(&rbu_data.lock);
- size = sprintf(buffer, "%lu\n", rbu_data.packetsize);
+ size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize);
spin_unlock(&rbu_data.lock);
}
return size;
dmi_initialized = 1;
}
+/**
+ * dmi_matches - check if dmi_system_id structure matches system DMI data
+ * @dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+ int i;
+
+ WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
+
+ for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+ int s = dmi->matches[i].slot;
+ if (s == DMI_NONE)
+ continue;
+ if (dmi_ident[s]
+ && strstr(dmi_ident[s], dmi->matches[i].substr))
+ continue;
+ /* No match */
+ return false;
+ }
+ return true;
+}
+
/**
* dmi_check_system - check system DMI data
* @list: array of dmi_system_id structures to match against
*/
int dmi_check_system(const struct dmi_system_id *list)
{
- int i, count = 0;
- const struct dmi_system_id *d = list;
-
- WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
-
- while (d->ident) {
- for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
- int s = d->matches[i].slot;
- if (s == DMI_NONE)
- continue;
- if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
- continue;
- /* No match */
- goto fail;
+ int count = 0;
+ const struct dmi_system_id *d;
+
+ for (d = list; d->ident; d++)
+ if (dmi_matches(d)) {
+ count++;
+ if (d->callback && d->callback(d))
+ break;
}
- count++;
- if (d->callback && d->callback(d))
- break;
-fail: d++;
- }
return count;
}
EXPORT_SYMBOL(dmi_check_system);
+/**
+ * dmi_first_match - find dmi_system_id structure matching system DMI data
+ * @list: array of dmi_system_id structures to match against
+ * All non-null elements of the list must match
+ * their slot's (field index's) data (i.e., each
+ * list string must be a substring of the specified
+ * DMI slot's string data) to be considered a
+ * successful match.
+ *
+ * Walk the blacklist table until the first match is found. Return the
+ * pointer to the matching entry or NULL if there's no match.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+ const struct dmi_system_id *d;
+
+ for (d = list; d->ident; d++)
+ if (dmi_matches(d))
+ return d;
+
+ return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
/**
* dmi_get_system_info - return DMI data value
* @field: data index (see enum dmi_field)
} else {
status = -EBUSY;
module_put(chip->owner);
+ goto done;
}
if (chip->request) {
#include "drmP.h"
#include <linux/module.h>
-#include <asm/agp.h>
#if __OS_HAS_AGP
+#include <asm/agp.h>
+
/**
* Get AGP information.
*
* @type: object type
*
* LOCKING:
- * Caller must hold DRM mode_config lock.
*
* Create a unique identifier based on @ptr in @dev's identifier space. Used
* for tracking modes, CRTCs and connectors.
int new_id = 0;
int ret;
- WARN(!mutex_is_locked(&dev->mode_config.mutex),
- "%s called w/o mode_config lock\n", __func__);
again:
if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
DRM_ERROR("Ran out memory getting a mode number\n");
return -EINVAL;
}
+ mutex_lock(&dev->mode_config.idr_mutex);
ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+ mutex_unlock(&dev->mode_config.idr_mutex);
if (ret == -EAGAIN)
goto again;
static void drm_mode_object_put(struct drm_device *dev,
struct drm_mode_object *object)
{
+ mutex_lock(&dev->mode_config.idr_mutex);
idr_remove(&dev->mode_config.crtc_idr, object->id);
+ mutex_unlock(&dev->mode_config.idr_mutex);
}
void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
{
- struct drm_mode_object *obj;
+ struct drm_mode_object *obj = NULL;
+ mutex_lock(&dev->mode_config.idr_mutex);
obj = idr_find(&dev->mode_config.crtc_idr, id);
if (!obj || (obj->type != type) || (obj->id != id))
- return NULL;
+ obj = NULL;
+ mutex_unlock(&dev->mode_config.idr_mutex);
return obj;
}
void drm_mode_config_init(struct drm_device *dev)
{
mutex_init(&dev->mode_config.mutex);
+ mutex_init(&dev->mode_config.idr_mutex);
INIT_LIST_HEAD(&dev->mode_config.fb_list);
INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
INIT_LIST_HEAD(&dev->mode_config.crtc_list);
*/
static void drm_cleanup(struct drm_device * dev)
{
+ struct drm_map_list *r_list, *list_temp;
DRM_DEBUG("\n");
if (!dev) {
drm_ht_remove(&dev->map_hash);
drm_ctxbitmap_cleanup(dev);
+ list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
+ drm_rmmap(dev, r_list->map);
+
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_put_minor(&dev->control);
edid = (struct edid *)drm_ddc_read(adapter);
if (!edid) {
- dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+ dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
drm_get_connector_name(connector));
return NULL;
}
drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
DRM_MEM_DRIVER);
- drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs,
- DRM_MEM_DRIVER);
drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
dev->num_crtcs, DRM_MEM_DRIVER);
drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
(unsigned long)dev);
spin_lock_init(&dev->vbl_lock);
- atomic_set(&dev->vbl_signal_pending, 0);
dev->num_crtcs = num_crtcs;
dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
if (!dev->vbl_queue)
goto err;
- dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vbl_sigs)
- goto err;
-
dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
DRM_MEM_DRIVER);
if (!dev->_vblank_count)
/* Zero per-crtc vblank stuff */
for (i = 0; i < num_crtcs; i++) {
init_waitqueue_head(&dev->vbl_queue[i]);
- INIT_LIST_HEAD(&dev->vbl_sigs[i]);
atomic_set(&dev->_vblank_count[i], 0);
atomic_set(&dev->vblank_refcount[i], 0);
}
* \param data user argument, pointing to a drm_wait_vblank structure.
* \return zero on success or a negative number on failure.
*
- * Verifies the IRQ is installed.
- *
- * If a signal is requested checks if this task has already scheduled the same signal
- * for the same vblank sequence number - nothing to be done in
- * that case. If the number of tasks waiting for the interrupt exceeds 100 the
- * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this
- * task.
- *
- * If a signal is not requested, then calls vblank_wait().
+ * This function enables the vblank interrupt on the pipe requested, then
+ * sleeps waiting for the requested sequence number to occur, and drops
+ * the vblank interrupt refcount afterwards. (vblank irq disable follows that
+ * after a timeout with no further vblank waits scheduled).
*/
int drm_wait_vblank(struct drm_device *dev, void *data,
struct drm_file *file_priv)
if ((!dev->pdev->irq) || (!dev->irq_enabled))
return -EINVAL;
+ if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
+ return -EINVAL;
+
if (vblwait->request.type &
~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) {
DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
vblwait->request.sequence = seq + 1;
}
- if (flags & _DRM_VBLANK_SIGNAL) {
- unsigned long irqflags;
- struct list_head *vbl_sigs = &dev->vbl_sigs[crtc];
- struct drm_vbl_sig *vbl_sig;
-
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
- /* Check if this task has already scheduled the same signal
- * for the same vblank sequence number; nothing to be done in
- * that case
- */
- list_for_each_entry(vbl_sig, vbl_sigs, head) {
- if (vbl_sig->sequence == vblwait->request.sequence
- && vbl_sig->info.si_signo ==
- vblwait->request.signal
- && vbl_sig->task == current) {
- spin_unlock_irqrestore(&dev->vbl_lock,
- irqflags);
- vblwait->reply.sequence = seq;
- goto done;
- }
- }
-
- if (atomic_read(&dev->vbl_signal_pending) >= 100) {
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- ret = -EBUSY;
- goto done;
- }
-
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
- vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig),
- DRM_MEM_DRIVER);
- if (!vbl_sig) {
- ret = -ENOMEM;
- goto done;
- }
-
- /* Get a refcount on the vblank, which will be released by
- * drm_vbl_send_signals().
- */
- ret = drm_vblank_get(dev, crtc);
- if (ret) {
- drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
- DRM_MEM_DRIVER);
- goto done;
- }
-
- atomic_inc(&dev->vbl_signal_pending);
-
- vbl_sig->sequence = vblwait->request.sequence;
- vbl_sig->info.si_signo = vblwait->request.signal;
- vbl_sig->task = current;
+ DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
+ vblwait->request.sequence, crtc);
+ dev->last_vblank_wait[crtc] = vblwait->request.sequence;
+ DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
+ (((drm_vblank_count(dev, crtc) -
+ vblwait->request.sequence) <= (1 << 23)) ||
+ !dev->irq_enabled));
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
- list_add_tail(&vbl_sig->head, vbl_sigs);
+ if (ret != -EINTR) {
+ struct timeval now;
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+ do_gettimeofday(&now);
- vblwait->reply.sequence = seq;
+ vblwait->reply.tval_sec = now.tv_sec;
+ vblwait->reply.tval_usec = now.tv_usec;
+ vblwait->reply.sequence = drm_vblank_count(dev, crtc);
+ DRM_DEBUG("returning %d to client\n",
+ vblwait->reply.sequence);
} else {
- DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
- vblwait->request.sequence, crtc);
- dev->last_vblank_wait[crtc] = vblwait->request.sequence;
- DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
- (((drm_vblank_count(dev, crtc) -
- vblwait->request.sequence) <= (1 << 23)) ||
- !dev->irq_enabled));
-
- if (ret != -EINTR) {
- struct timeval now;
-
- do_gettimeofday(&now);
-
- vblwait->reply.tval_sec = now.tv_sec;
- vblwait->reply.tval_usec = now.tv_usec;
- vblwait->reply.sequence = drm_vblank_count(dev, crtc);
- DRM_DEBUG("returning %d to client\n",
- vblwait->reply.sequence);
- } else {
- DRM_DEBUG("vblank wait interrupted by signal\n");
- }
+ DRM_DEBUG("vblank wait interrupted by signal\n");
}
done:
return ret;
}
-/**
- * Send the VBLANK signals.
- *
- * \param dev DRM device.
- * \param crtc CRTC where the vblank event occurred
- *
- * Sends a signal for each task in drm_device::vbl_sigs and empties the list.
- *
- * If a signal is not requested, then calls vblank_wait().
- */
-static void drm_vbl_send_signals(struct drm_device *dev, int crtc)
-{
- struct drm_vbl_sig *vbl_sig, *tmp;
- struct list_head *vbl_sigs;
- unsigned int vbl_seq;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->vbl_lock, flags);
-
- vbl_sigs = &dev->vbl_sigs[crtc];
- vbl_seq = drm_vblank_count(dev, crtc);
-
- list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
- if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
- vbl_sig->info.si_code = vbl_seq;
- send_sig_info(vbl_sig->info.si_signo,
- &vbl_sig->info, vbl_sig->task);
-
- list_del(&vbl_sig->head);
-
- drm_free(vbl_sig, sizeof(*vbl_sig),
- DRM_MEM_DRIVER);
- atomic_dec(&dev->vbl_signal_pending);
- drm_vblank_put(dev, crtc);
- }
- }
-
- spin_unlock_irqrestore(&dev->vbl_lock, flags);
-}
-
/**
* drm_handle_vblank - handle a vblank event
* @dev: DRM device
{
atomic_inc(&dev->_vblank_count[crtc]);
DRM_WAKEUP(&dev->vbl_queue[crtc]);
- drm_vbl_send_signals(dev, crtc);
}
EXPORT_SYMBOL(drm_handle_vblank);
struct drm_master *master = container_of(kref, struct drm_master, refcount);
struct drm_magic_entry *pt, *next;
struct drm_device *dev = master->minor->dev;
+ struct drm_map_list *r_list, *list_temp;
list_del(&master->head);
if (dev->driver->master_destroy)
dev->driver->master_destroy(dev, master);
+ list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) {
+ if (r_list->master == master) {
+ drm_rmmap_locked(dev, r_list->map);
+ r_list = NULL;
+ }
+ }
+
if (master->unique) {
drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER);
master->unique = NULL;
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
- DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
-
- if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
+ if (IS_MOBILE(dev) || IS_I9XX(dev))
dev_priv->cursor_needs_physical = true;
else
dev_priv->cursor_needs_physical = false;
+ if (IS_I965G(dev) || IS_G33(dev))
+ dev_priv->cursor_needs_physical = false;
+
ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
if (ret)
goto kfree_devname;
{
int i;
- for (i = 0; i < I915_MAX_PHYS_OBJECT; i++)
+ for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
i915_gem_free_phys_object(dev, i);
}
ret = i915_gem_init_phys_object(dev, id,
obj->size);
if (ret) {
- DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size);
+ DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size);
goto out;
}
}
chan->reg = reg;
snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
chan->adapter.owner = THIS_MODULE;
-#ifndef I2C_HW_B_INTELFB
-#define I2C_HW_B_INTELFB I2C_HW_B_I810
-#endif
- chan->adapter.id = I2C_HW_B_INTELFB;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &dev->pdev->dev;
chan->algo.setsda = set_data;
if (dev_priv->panel_fixed_mode != NULL) {
struct drm_display_mode *mode;
- mutex_unlock(&dev->mode_config.mutex);
+ mutex_lock(&dev->mode_config.mutex);
mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
drm_mode_probed_add(connector, mode);
mutex_unlock(&dev->mode_config.mutex);
kfree(connector);
}
+static int intel_lvds_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t value)
+{
+ struct drm_device *dev = connector->dev;
+
+ if (property == dev->mode_config.dpms_property && connector->encoder)
+ intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+ return 0;
+}
+
static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
.dpms = intel_lvds_dpms,
.mode_fixup = intel_lvds_mode_fixup,
.restore = intel_lvds_restore,
.detect = intel_lvds_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
+ .set_property = intel_lvds_set_property,
.destroy = intel_lvds_destroy,
};
}
EXPORT_SYMBOL_GPL(hid_connect);
+/* a list of devices for which there is a specialized driver on HID bus */
static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
.uevent = hid_uevent,
};
+/* a list of devices that shouldn't be handled by HID core at all */
static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2 0x0036
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3 0x0034
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4 0x0044
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5 0x0045
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
#define MS_NOGET 0x10
/*
- * Microsoft Wireless Desktop Receiver (Model 1028) has several
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
* 'Usage Min/Max' where it ought to have 'Physical Min/Max'
*/
static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
- if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 &&
- rdesc[286] == 0x2a && rdesc[304] == 0x19 &&
- rdesc[306] == 0x29 && rdesc[352] == 0x1a &&
- rdesc[355] == 0x2a && rdesc[557] == 0x19 &&
+ if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 &&
rdesc[559] == 0x29) {
dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver "
"Model 1028 report descriptor\n");
- rdesc[284] = rdesc[304] = rdesc[557] = 0x35;
- rdesc[352] = 0x36;
- rdesc[286] = rdesc[355] = 0x46;
- rdesc[306] = rdesc[559] = 0x45;
+ rdesc[557] = 0x35;
+ rdesc[559] = 0x45;
}
}
case HIDIOCGSTRING:
mutex_lock(&hiddev->existancelock);
- if (!hiddev->exist)
+ if (hiddev->exist)
r = hiddev_ioctl_string(hiddev, cmd, user_arg);
else
r = -ENODEV;
/*
* Temperature sensors keys (sp78 - 2 bytes).
*/
-static const char* temperature_sensors_sets[][36] = {
+static const char *temperature_sensors_sets[][41] = {
/* Set 0: Macbook Pro */
{ "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
"Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
{ "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0",
"TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P",
"Ts0S", NULL },
+/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */
+ { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
+ "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P",
+ "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P",
+ "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
+ "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
+ NULL },
};
/* List of keys used to read/write fan speeds */
applesmc_show_temperature, NULL, 33);
static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
applesmc_show_temperature, NULL, 34);
+static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO,
+ applesmc_show_temperature, NULL, 35);
+static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO,
+ applesmc_show_temperature, NULL, 36);
+static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO,
+ applesmc_show_temperature, NULL, 37);
+static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
+ applesmc_show_temperature, NULL, 38);
+static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
+ applesmc_show_temperature, NULL, 39);
static struct attribute *temperature_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp33_input.dev_attr.attr,
&sensor_dev_attr_temp34_input.dev_attr.attr,
&sensor_dev_attr_temp35_input.dev_attr.attr,
+ &sensor_dev_attr_temp36_input.dev_attr.attr,
+ &sensor_dev_attr_temp37_input.dev_attr.attr,
+ &sensor_dev_attr_temp38_input.dev_attr.attr,
+ &sensor_dev_attr_temp39_input.dev_attr.attr,
+ &sensor_dev_attr_temp40_input.dev_attr.attr,
NULL
};
{ .accelerometer = 0, .light = 0, .temperature_set = 14 },
/* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
{ .accelerometer = 1, .light = 1, .temperature_set = 15 },
+/* MacPro3,1: temperature set 16 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 16 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple MacPro3", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
+ &applesmc_dmi_data[16]},
{ applesmc_dmi_match, "Apple MacPro", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
};
static struct i2c_adapter ioc_ops = {
- .id = I2C_HW_B_IOC,
.algo_data = &ioc_data,
};
static struct i2c_adapter ali1535_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI1535,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
static struct i2c_adapter ali1563_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI1563,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &ali1563_algorithm,
};
static struct i2c_adapter ali15x3_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI15X3,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
struct i2c_adapter amd756_smbus = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_AMD756,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
smbus->adapter.owner = THIS_MODULE;
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"SMBus2 AMD8111 adapter at %04x", smbus->base);
- smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
priv->xfer_timeout = 200;
priv->ack_timeout = 200;
- priv->adap.id = I2C_HW_AU1550_PSC;
priv->adap.nr = pdev->id;
priv->adap.algo = &au1550_algo;
priv->adap.algo_data = priv;
iface->timeout_timer.data = (unsigned long)iface;
p_adap = &iface->adap;
- p_adap->id = I2C_HW_BLACKFIN;
p_adap->nr = pdev->id;
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
static struct i2c_adapter pcf_isa_ops = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .id = I2C_HW_P_ELEK,
.algo_data = &pcf_isa_data,
.name = "i2c-elektor",
};
static struct i2c_adapter hydra_adap = {
.owner = THIS_MODULE,
.name = "Hydra i2c",
- .id = I2C_HW_B_HYDRA,
.algo_data = &hydra_bit_data,
};
static struct i2c_adapter i801_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_I801,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
adap->dev.parent = &ofdev->dev;
strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
i2c_set_adapdata(adap, dev);
- adap->id = I2C_HW_OCP;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &iic_algo;
adap->timeout = 1;
}
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
- new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
new_adapter->dev.parent = &pdev->dev;
drv_data->algo_data.udelay = 6;
drv_data->algo_data.timeout = 100;
- drv_data->adapter.id = I2C_HW_B_IXP2000,
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
sizeof(drv_data->adapter.name));
drv_data->adapter.algo_data = &drv_data->algo_data,
static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
.name = "MPC adapter",
- .id = I2C_HW_MPC107,
.algo = &mpc_algo,
.timeout = 1,
};
goto exit_unmap_regs;
}
drv_data->adapter.dev.parent = &pd->dev;
- drv_data->adapter.id = I2C_HW_MV64XXX;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
return -EBUSY;
}
smbus->adapter.owner = THIS_MODULE;
- smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
static struct i2c_adapter parport_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .id = I2C_HW_B_LP,
.algo_data = &parport_algo_data,
.name = "Parallel port adapter (light)",
};
/* Fill the rest of the structure */
adapter->adapter.owner = THIS_MODULE;
adapter->adapter.class = I2C_CLASS_HWMON;
- adapter->adapter.id = I2C_HW_B_LP;
strlcpy(adapter->adapter.name, "Parallel port adapter",
sizeof(adapter->adapter.name));
adapter->algo_data = parport_algo_data;
static struct i2c_adapter pca_isa_ops = {
.owner = THIS_MODULE,
- .id = I2C_HW_A_ISA,
.algo_data = &pca_isa_data,
.name = "PCA9564 ISA Adapter",
.timeout = 100,
static struct i2c_adapter piix4_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_PIIX4,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
static struct i2c_adapter sibyte_board_adapter[2] = {
{
.owner = THIS_MODULE,
- .id = I2C_HW_SIBYTE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[0],
},
{
.owner = THIS_MODULE,
- .id = I2C_HW_SIBYTE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = NULL,
.algo_data = &sibyte_board_data[1],
static struct i2c_adapter sis5595_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_SIS5595,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_SIS630,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
static struct i2c_adapter sis96x_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_SIS96X,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
static struct i2c_adapter vt586b_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_B_VIA,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.name = "VIA i2c",
.algo_data = &bit_data,
static struct i2c_adapter vt596_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_VIA2,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
static struct i2c_adapter voodoo3_i2c_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_B_VOO,
.class = I2C_CLASS_TV_ANALOG,
.name = "I2C Voodoo3/Banshee adapter",
.algo_data = &voo_i2c_bit_data,
static struct i2c_adapter voodoo3_ddc_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_B_VOO,
.class = I2C_CLASS_DDC,
.name = "DDC Voodoo3/Banshee adapter",
.algo_data = &voo_ddc_bit_data,
i2c_set_adapdata(adapter, iface);
snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
adapter->owner = THIS_MODULE;
- adapter->id = I2C_HW_SMBUS_SCX200;
adapter->algo = &scx200_acb_algorithm;
adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adapter->dev.parent = dev;
static struct i2c_adapter scx200_i2c_ops = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .id = I2C_HW_B_SCX200,
.algo_data = &scx200_i2c_data,
.name = "NatSemi SCx200 I2C",
};
This driver can also be built as a module. If so, the module
will be called ds1682.
-config AT24
- tristate "EEPROMs from most vendors"
- depends on SYSFS && EXPERIMENTAL
- help
- Enable this driver to get read/write support to most I2C EEPROMs,
- after you configure the driver to know about each EEPROM on
- your target board. Use these generic chip names, instead of
- vendor-specific ones like at24c64 or 24lc02:
-
- 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
- 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
- Unless you like data loss puzzles, always be sure that any chip
- you configure as a 24c32 (32 kbit) or larger is NOT really a
- 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
- as read-only won't help recover from this. Also, if your chip
- has any software write-protect mechanism you may want to review the
- code to make sure this driver won't turn it on by accident.
-
- If you use this with an SMBus adapter instead of an I2C adapter,
- full functionality is not available. Only smaller devices are
- supported (24c16 and below, max 4 kByte).
-
- This driver can also be built as a module. If so, the module
- will be called at24.
-
-config SENSORS_EEPROM
- tristate "EEPROM reader"
- depends on EXPERIMENTAL
- help
- If you say yes here you get read-only access to the EEPROM data
- available on modern memory DIMMs and Sony Vaio laptops. Such
- EEPROMs could theoretically be available on other devices as well.
-
- This driver can also be built as a module. If so, the module
- will be called eeprom.
-
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
depends on EXPERIMENTAL && GPIO_PCF857X = "n"
#
obj-$(CONFIG_DS1682) += ds1682.o
-obj-$(CONFIG_AT24) += at24.o
-obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
+++ /dev/null
-/*
- * at24.c - handle most I2C EEPROMs
- *
- * Copyright (C) 2005-2007 David Brownell
- * Copyright (C) 2008 Wolfram Sang, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-#include <linux/mod_devicetable.h>
-#include <linux/log2.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-/*
- * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
- * Differences between different vendor product lines (like Atmel AT24C or
- * MicroChip 24LC, etc) won't much matter for typical read/write access.
- * There are also I2C RAM chips, likewise interchangeable. One example
- * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
- *
- * However, misconfiguration can lose data. "Set 16-bit memory address"
- * to a part with 8-bit addressing will overwrite data. Writing with too
- * big a page size also loses data. And it's not safe to assume that the
- * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
- * uses 0x51, for just one example.
- *
- * Accordingly, explicit board-specific configuration data should be used
- * in almost all cases. (One partial exception is an SMBus used to access
- * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
- *
- * So this driver uses "new style" I2C driver binding, expecting to be
- * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
- * similar kernel-resident tables; or, configuration data coming from
- * a bootloader.
- *
- * Other than binding model, current differences from "eeprom" driver are
- * that this one handles write access and isn't restricted to 24c02 devices.
- * It also handles larger devices (32 kbit and up) with two-byte addresses,
- * which won't work on pure SMBus systems.
- */
-
-struct at24_data {
- struct at24_platform_data chip;
- bool use_smbus;
-
- /*
- * Lock protects against activities from other Linux tasks,
- * but not from changes by other I2C masters.
- */
- struct mutex lock;
- struct bin_attribute bin;
-
- u8 *writebuf;
- unsigned write_max;
- unsigned num_addresses;
-
- /*
- * Some chips tie up multiple I2C addresses; dummy devices reserve
- * them for us, and we'll use them with SMBus calls.
- */
- struct i2c_client *client[];
-};
-
-/*
- * This parameter is to help this driver avoid blocking other drivers out
- * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
- * clock, one 256 byte read takes about 1/43 second which is excessive;
- * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
- * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
- *
- * This value is forced to be a power of two so that writes align on pages.
- */
-static unsigned io_limit = 128;
-module_param(io_limit, uint, 0);
-MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
-
-/*
- * Specs often allow 5 msec for a page write, sometimes 20 msec;
- * it's important to recover from write timeouts.
- */
-static unsigned write_timeout = 25;
-module_param(write_timeout, uint, 0);
-MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
-
-#define AT24_SIZE_BYTELEN 5
-#define AT24_SIZE_FLAGS 8
-
-#define AT24_BITMASK(x) (BIT(x) - 1)
-
-/* create non-zero magic value for given eeprom parameters */
-#define AT24_DEVICE_MAGIC(_len, _flags) \
- ((1 << AT24_SIZE_FLAGS | (_flags)) \
- << AT24_SIZE_BYTELEN | ilog2(_len))
-
-static const struct i2c_device_id at24_ids[] = {
- /* needs 8 addresses as A0-A2 are ignored */
- { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
- /* old variants can't be handled with this generic entry! */
- { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
- { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
- /* spd is a 24c02 in memory DIMMs */
- { "spd", AT24_DEVICE_MAGIC(2048 / 8,
- AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
- { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
- /* 24rf08 quirk is handled at i2c-core */
- { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
- { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
- { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
- { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
- { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
- { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
- { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
- { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
- { "at24", 0 },
- { /* END OF LIST */ }
-};
-MODULE_DEVICE_TABLE(i2c, at24_ids);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * This routine supports chips which consume multiple I2C addresses. It
- * computes the addressing information to be used for a given r/w request.
- * Assumes that sanity checks for offset happened at sysfs-layer.
- */
-static struct i2c_client *at24_translate_offset(struct at24_data *at24,
- unsigned *offset)
-{
- unsigned i;
-
- if (at24->chip.flags & AT24_FLAG_ADDR16) {
- i = *offset >> 16;
- *offset &= 0xffff;
- } else {
- i = *offset >> 8;
- *offset &= 0xff;
- }
-
- return at24->client[i];
-}
-
-static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
- unsigned offset, size_t count)
-{
- struct i2c_msg msg[2];
- u8 msgbuf[2];
- struct i2c_client *client;
- int status, i;
-
- memset(msg, 0, sizeof(msg));
-
- /*
- * REVISIT some multi-address chips don't rollover page reads to
- * the next slave address, so we may need to truncate the count.
- * Those chips might need another quirk flag.
- *
- * If the real hardware used four adjacent 24c02 chips and that
- * were misconfigured as one 24c08, that would be a similar effect:
- * one "eeprom" file not four, but larger reads would fail when
- * they crossed certain pages.
- */
-
- /*
- * Slave address and byte offset derive from the offset. Always
- * set the byte address; on a multi-master board, another master
- * may have changed the chip's "current" address pointer.
- */
- client = at24_translate_offset(at24, &offset);
-
- if (count > io_limit)
- count = io_limit;
-
- /* Smaller eeproms can work given some SMBus extension calls */
- if (at24->use_smbus) {
- if (count > I2C_SMBUS_BLOCK_MAX)
- count = I2C_SMBUS_BLOCK_MAX;
- status = i2c_smbus_read_i2c_block_data(client, offset,
- count, buf);
- dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
- count, offset, status);
- return (status < 0) ? -EIO : status;
- }
-
- /*
- * When we have a better choice than SMBus calls, use a combined
- * I2C message. Write address; then read up to io_limit data bytes.
- * Note that read page rollover helps us here (unlike writes).
- * msgbuf is u8 and will cast to our needs.
- */
- i = 0;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msgbuf[i++] = offset >> 8;
- msgbuf[i++] = offset;
-
- msg[0].addr = client->addr;
- msg[0].buf = msgbuf;
- msg[0].len = i;
-
- msg[1].addr = client->addr;
- msg[1].flags = I2C_M_RD;
- msg[1].buf = buf;
- msg[1].len = count;
-
- status = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
- count, offset, status);
-
- if (status == 2)
- return count;
- else if (status >= 0)
- return -EIO;
- else
- return status;
-}
-
-static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
- ssize_t retval = 0;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
- if (unlikely(!count))
- return count;
-
- /*
- * Read data from chip, protecting against concurrent updates
- * from this host, but not from other I2C masters.
- */
- mutex_lock(&at24->lock);
-
- while (count) {
- ssize_t status;
-
- status = at24_eeprom_read(at24, buf, off, count);
- if (status <= 0) {
- if (retval == 0)
- retval = status;
- break;
- }
- buf += status;
- off += status;
- count -= status;
- retval += status;
- }
-
- mutex_unlock(&at24->lock);
-
- return retval;
-}
-
-
-/*
- * REVISIT: export at24_bin{read,write}() to let other kernel code use
- * eeprom data. For example, it might hold a board's Ethernet address, or
- * board-specific calibration data generated on the manufacturing floor.
- */
-
-
-/*
- * Note that if the hardware write-protect pin is pulled high, the whole
- * chip is normally write protected. But there are plenty of product
- * variants here, including OTP fuses and partial chip protect.
- *
- * We only use page mode writes; the alternative is sloooow. This routine
- * writes at most one page.
- */
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
- unsigned offset, size_t count)
-{
- struct i2c_client *client;
- struct i2c_msg msg;
- ssize_t status;
- unsigned long timeout, write_time;
- unsigned next_page;
-
- /* Get corresponding I2C address and adjust offset */
- client = at24_translate_offset(at24, &offset);
-
- /* write_max is at most a page */
- if (count > at24->write_max)
- count = at24->write_max;
-
- /* Never roll over backwards, to the start of this page */
- next_page = roundup(offset + 1, at24->chip.page_size);
- if (offset + count > next_page)
- count = next_page - offset;
-
- /* If we'll use I2C calls for I/O, set up the message */
- if (!at24->use_smbus) {
- int i = 0;
-
- msg.addr = client->addr;
- msg.flags = 0;
-
- /* msg.buf is u8 and casts will mask the values */
- msg.buf = at24->writebuf;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msg.buf[i++] = offset >> 8;
-
- msg.buf[i++] = offset;
- memcpy(&msg.buf[i], buf, count);
- msg.len = i + count;
- }
-
- /*
- * Writes fail if the previous one didn't complete yet. We may
- * loop a few times until this one succeeds, waiting at least
- * long enough for one entire page write to work.
- */
- timeout = jiffies + msecs_to_jiffies(write_timeout);
- do {
- write_time = jiffies;
- if (at24->use_smbus) {
- status = i2c_smbus_write_i2c_block_data(client,
- offset, count, buf);
- if (status == 0)
- status = count;
- } else {
- status = i2c_transfer(client->adapter, &msg, 1);
- if (status == 1)
- status = count;
- }
- dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
- count, offset, status, jiffies);
-
- if (status == count)
- return count;
-
- /* REVISIT: at HZ=100, this is sloooow */
- msleep(1);
- } while (time_before(write_time, timeout));
-
- return -ETIMEDOUT;
-}
-
-static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
- ssize_t retval = 0;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
- if (unlikely(!count))
- return count;
-
- /*
- * Write data to chip, protecting against concurrent updates
- * from this host, but not from other I2C masters.
- */
- mutex_lock(&at24->lock);
-
- while (count) {
- ssize_t status;
-
- status = at24_eeprom_write(at24, buf, off, count);
- if (status <= 0) {
- if (retval == 0)
- retval = status;
- break;
- }
- buf += status;
- off += status;
- count -= status;
- retval += status;
- }
-
- mutex_unlock(&at24->lock);
-
- return retval;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- struct at24_platform_data chip;
- bool writable;
- bool use_smbus = false;
- struct at24_data *at24;
- int err;
- unsigned i, num_addresses;
- kernel_ulong_t magic;
-
- if (client->dev.platform_data) {
- chip = *(struct at24_platform_data *)client->dev.platform_data;
- } else {
- if (!id->driver_data) {
- err = -ENODEV;
- goto err_out;
- }
- magic = id->driver_data;
- chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
- magic >>= AT24_SIZE_BYTELEN;
- chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
- /*
- * This is slow, but we can't know all eeproms, so we better
- * play safe. Specifying custom eeprom-types via platform_data
- * is recommended anyhow.
- */
- chip.page_size = 1;
- }
-
- if (!is_power_of_2(chip.byte_len))
- dev_warn(&client->dev,
- "byte_len looks suspicious (no power of 2)!\n");
- if (!is_power_of_2(chip.page_size))
- dev_warn(&client->dev,
- "page_size looks suspicious (no power of 2)!\n");
-
- /* Use I2C operations unless we're stuck with SMBus extensions. */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- if (chip.flags & AT24_FLAG_ADDR16) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
- use_smbus = true;
- }
-
- if (chip.flags & AT24_FLAG_TAKE8ADDR)
- num_addresses = 8;
- else
- num_addresses = DIV_ROUND_UP(chip.byte_len,
- (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
-
- at24 = kzalloc(sizeof(struct at24_data) +
- num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
- if (!at24) {
- err = -ENOMEM;
- goto err_out;
- }
-
- mutex_init(&at24->lock);
- at24->use_smbus = use_smbus;
- at24->chip = chip;
- at24->num_addresses = num_addresses;
-
- /*
- * Export the EEPROM bytes through sysfs, since that's convenient.
- * By default, only root should see the data (maybe passwords etc)
- */
- at24->bin.attr.name = "eeprom";
- at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
- at24->bin.read = at24_bin_read;
- at24->bin.size = chip.byte_len;
-
- writable = !(chip.flags & AT24_FLAG_READONLY);
- if (writable) {
- if (!use_smbus || i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
-
- unsigned write_max = chip.page_size;
-
- at24->bin.write = at24_bin_write;
- at24->bin.attr.mode |= S_IWUSR;
-
- if (write_max > io_limit)
- write_max = io_limit;
- if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
- write_max = I2C_SMBUS_BLOCK_MAX;
- at24->write_max = write_max;
-
- /* buffer (data + address at the beginning) */
- at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
- if (!at24->writebuf) {
- err = -ENOMEM;
- goto err_struct;
- }
- } else {
- dev_warn(&client->dev,
- "cannot write due to controller restrictions.");
- }
- }
-
- at24->client[0] = client;
-
- /* use dummy devices for multiple-address chips */
- for (i = 1; i < num_addresses; i++) {
- at24->client[i] = i2c_new_dummy(client->adapter,
- client->addr + i);
- if (!at24->client[i]) {
- dev_err(&client->dev, "address 0x%02x unavailable\n",
- client->addr + i);
- err = -EADDRINUSE;
- goto err_clients;
- }
- }
-
- err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
- if (err)
- goto err_clients;
-
- i2c_set_clientdata(client, at24);
-
- dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
- at24->bin.size, client->name,
- writable ? "(writable)" : "(read-only)");
- dev_dbg(&client->dev,
- "page_size %d, num_addresses %d, write_max %d%s\n",
- chip.page_size, num_addresses,
- at24->write_max,
- use_smbus ? ", use_smbus" : "");
-
- return 0;
-
-err_clients:
- for (i = 1; i < num_addresses; i++)
- if (at24->client[i])
- i2c_unregister_device(at24->client[i]);
-
- kfree(at24->writebuf);
-err_struct:
- kfree(at24);
-err_out:
- dev_dbg(&client->dev, "probe error %d\n", err);
- return err;
-}
-
-static int __devexit at24_remove(struct i2c_client *client)
-{
- struct at24_data *at24;
- int i;
-
- at24 = i2c_get_clientdata(client);
- sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
-
- for (i = 1; i < at24->num_addresses; i++)
- i2c_unregister_device(at24->client[i]);
-
- kfree(at24->writebuf);
- kfree(at24);
- i2c_set_clientdata(client, NULL);
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct i2c_driver at24_driver = {
- .driver = {
- .name = "at24",
- .owner = THIS_MODULE,
- },
- .probe = at24_probe,
- .remove = __devexit_p(at24_remove),
- .id_table = at24_ids,
-};
-
-static int __init at24_init(void)
-{
- io_limit = rounddown_pow_of_two(io_limit);
- return i2c_add_driver(&at24_driver);
-}
-module_init(at24_init);
-
-static void __exit at24_exit(void)
-{
- i2c_del_driver(&at24_driver);
-}
-module_exit(at24_exit);
-
-MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
-MODULE_AUTHOR("David Brownell and Wolfram Sang");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
- Philip Edelbrock <phil@netroedge.com>
- Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
- Copyright (C) 2003 IBM Corp.
- Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
- 0x55, 0x56, 0x57, I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(eeprom);
-
-
-/* Size of EEPROM in bytes */
-#define EEPROM_SIZE 256
-
-/* possible types of eeprom devices */
-enum eeprom_nature {
- UNKNOWN,
- VAIO,
-};
-
-/* Each client has this additional data */
-struct eeprom_data {
- struct mutex update_lock;
- u8 valid; /* bitfield, bit!=0 if slice is valid */
- unsigned long last_updated[8]; /* In jiffies, 8 slices */
- u8 data[EEPROM_SIZE]; /* Register values */
- enum eeprom_nature nature;
-};
-
-
-static void eeprom_update_client(struct i2c_client *client, u8 slice)
-{
- struct eeprom_data *data = i2c_get_clientdata(client);
- int i;
-
- mutex_lock(&data->update_lock);
-
- if (!(data->valid & (1 << slice)) ||
- time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
- dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- for (i = slice << 5; i < (slice + 1) << 5; i += 32)
- if (i2c_smbus_read_i2c_block_data(client, i,
- 32, data->data + i)
- != 32)
- goto exit;
- } else {
- for (i = slice << 5; i < (slice + 1) << 5; i += 2) {
- int word = i2c_smbus_read_word_data(client, i);
- if (word < 0)
- goto exit;
- data->data[i] = word & 0xff;
- data->data[i + 1] = word >> 8;
- }
- }
- data->last_updated[slice] = jiffies;
- data->valid |= (1 << slice);
- }
-exit:
- mutex_unlock(&data->update_lock);
-}
-
-static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
- char *buf, loff_t off, size_t count)
-{
- struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
- struct eeprom_data *data = i2c_get_clientdata(client);
- u8 slice;
-
- if (off > EEPROM_SIZE)
- return 0;
- if (off + count > EEPROM_SIZE)
- count = EEPROM_SIZE - off;
-
- /* Only refresh slices which contain requested bytes */
- for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
- eeprom_update_client(client, slice);
-
- /* Hide Vaio private settings to regular users:
- - BIOS passwords: bytes 0x00 to 0x0f
- - UUID: bytes 0x10 to 0x1f
- - Serial number: 0xc0 to 0xdf */
- if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
- int i;
-
- for (i = 0; i < count; i++) {
- if ((off + i <= 0x1f) ||
- (off + i >= 0xc0 && off + i <= 0xdf))
- buf[i] = 0;
- else
- buf[i] = data->data[off + i];
- }
- } else {
- memcpy(buf, &data->data[off], count);
- }
-
- return count;
-}
-
-static struct bin_attribute eeprom_attr = {
- .attr = {
- .name = "eeprom",
- .mode = S_IRUGO,
- },
- .size = EEPROM_SIZE,
- .read = eeprom_read,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int eeprom_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
- addresses 0x50-0x57, but we only care about 0x50. So decline
- attaching to addresses >= 0x51 on DDC buses */
- if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
- return -ENODEV;
-
- /* There are four ways we can read the EEPROM data:
- (1) I2C block reads (faster, but unsupported by most adapters)
- (2) Word reads (128% overhead)
- (3) Consecutive byte reads (88% overhead, unsafe)
- (4) Regular byte data reads (265% overhead)
- The third and fourth methods are not implemented by this driver
- because all known adapters support one of the first two. */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
- && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- return -ENODEV;
-
- strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int eeprom_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct i2c_adapter *adapter = client->adapter;
- struct eeprom_data *data;
- int err;
-
- if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- memset(data->data, 0xff, EEPROM_SIZE);
- i2c_set_clientdata(client, data);
- mutex_init(&data->update_lock);
- data->nature = UNKNOWN;
-
- /* Detect the Vaio nature of EEPROMs.
- We use the "PCG-" or "VGN-" prefix as the signature. */
- if (client->addr == 0x57
- && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
- char name[4];
-
- name[0] = i2c_smbus_read_byte_data(client, 0x80);
- name[1] = i2c_smbus_read_byte_data(client, 0x81);
- name[2] = i2c_smbus_read_byte_data(client, 0x82);
- name[3] = i2c_smbus_read_byte_data(client, 0x83);
-
- if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
- dev_info(&client->dev, "Vaio EEPROM detected, "
- "enabling privacy protection\n");
- data->nature = VAIO;
- }
- }
-
- /* create the sysfs eeprom file */
- err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
- if (err)
- goto exit_kfree;
-
- return 0;
-
-exit_kfree:
- kfree(data);
-exit:
- return err;
-}
-
-static int eeprom_remove(struct i2c_client *client)
-{
- sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
- kfree(i2c_get_clientdata(client));
-
- return 0;
-}
-
-static const struct i2c_device_id eeprom_id[] = {
- { "eeprom", 0 },
- { }
-};
-
-static struct i2c_driver eeprom_driver = {
- .driver = {
- .name = "eeprom",
- },
- .probe = eeprom_probe,
- .remove = eeprom_remove,
- .id_table = eeprom_id,
-
- .class = I2C_CLASS_DDC | I2C_CLASS_SPD,
- .detect = eeprom_detect,
- .address_data = &addr_data,
-};
-
-static int __init eeprom_init(void)
-{
- return i2c_add_driver(&eeprom_driver);
-}
-
-static void __exit eeprom_exit(void)
-{
- i2c_del_driver(&eeprom_driver);
-}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com> and "
- "Greg Kroah-Hartman <greg@kroah.com>");
-MODULE_DESCRIPTION("I2C EEPROM driver");
-MODULE_LICENSE("GPL");
-
-module_init(eeprom_init);
-module_exit(eeprom_exit);
static const struct ide_port_info falconide_port_info = {
.tp_ops = &falconide_tp_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
+ .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE,
};
static void __init falconide_setup_ports(hw_regs_t *hw)
/* register with global device tree */
dev_set_name(&hwif->gendev, hwif->name);
hwif->gendev.driver_data = hwif;
- hwif->gendev.parent = hwif->dev;
+ if (hwif->gendev.parent == NULL)
+ hwif->gendev.parent = hwif->dev;
hwif->gendev.release = hwif_release_dev;
ret = device_register(&hwif->gendev);
{
struct clk *clk;
struct resource *mem, *irq;
- unsigned long base, rate;
+ void __iomem *base;
+ unsigned long rate;
int i, rc;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
base = IO_ADDRESS(mem->start);
/* Configure the Palm Chip controller */
- palm_bk3710_chipinit((void __iomem *)base);
+ palm_bk3710_chipinit(base);
for (i = 0; i < IDE_NR_PORTS - 2; i++)
- hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
- hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+ hw.io_ports_array[i] = (unsigned long)
+ (base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
+ hw.io_ports.ctl_addr = (unsigned long)
+ (base + IDE_PALM_ATA_PRI_CTL_OFFSET);
hw.irq = irq->start;
hw.dev = &pdev->dev;
hw.chipset = ide_palm3710;
#define IEEE1394_SPEED_800 0x03
#define IEEE1394_SPEED_1600 0x04
#define IEEE1394_SPEED_3200 0x05
-
-/* The current highest tested speed supported by the subsystem */
-#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800
+#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200
/* Maps speed values above to a string representation */
extern const char *hpsb_speedto_str[];
u8 cldcnt[nodecount];
u8 *map = host->speed_map;
u8 *speedcap = host->speed;
+ u8 local_link_speed = host->csr.lnk_spd;
struct selfid *sid;
struct ext_selfid *esid;
int i, j, n;
if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++;
speedcap[n] = sid->speed;
- if (speedcap[n] > host->csr.lnk_spd)
- speedcap[n] = host->csr.lnk_spd;
+ if (speedcap[n] > local_link_speed)
+ speedcap[n] = local_link_speed;
n--;
}
}
}
}
-#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX
- /* assume maximum speed for 1394b PHYs, nodemgr will correct it */
- for (n = 0; n < nodecount; n++)
- if (speedcap[n] == SELFID_SPEED_UNKNOWN)
- speedcap[n] = IEEE1394_SPEED_MAX;
-#endif
+ /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */
+ if (local_link_speed > SELFID_SPEED_UNKNOWN)
+ for (i = 0; i < nodecount; i++)
+ if (speedcap[i] == SELFID_SPEED_UNKNOWN)
+ speedcap[i] = local_link_speed;
}
#define OHCI1394_DRIVER_NAME "ohci1394"
-#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES 0xf
#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
#define OHCI1394_MAX_SELF_ID_ERRORS 16
i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
- i2c_ad->id = I2C_HW_B_PCILYNX;
strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
i2c_adapter_data = bit_data;
i2c_ad->algo_data = &i2c_adapter_data;
*/
static int sbp2_max_speed = IEEE1394_SPEED_MAX;
module_param_named(max_speed, sbp2_max_speed, int, 0644);
-MODULE_PARM_DESC(max_speed, "Force max speed "
- "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
+MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, "
+ "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)");
/*
* Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
static int sbp2_max_speed_and_size(struct sbp2_lu *);
-static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
+static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa };
static DEFINE_RWLOCK(sbp2_hi_logical_units_lock);
.sdev_attrs = sbp2_sysfs_sdev_attrs,
};
-/* for match-all entries in sbp2_workarounds_table */
-#define SBP2_ROM_VALUE_WILDCARD 0x1000000
+#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */
+#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */
/*
* List of devices with known bugs.
*/
static const struct {
u32 firmware_revision;
- u32 model_id;
+ u32 model;
unsigned workarounds;
} sbp2_workarounds_table[] = {
/* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
.firmware_revision = 0x002800,
- .model_id = 0x001010,
+ .model = 0x001010,
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
SBP2_WORKAROUND_MODE_SENSE_8 |
SBP2_WORKAROUND_POWER_CONDITION,
},
/* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
.firmware_revision = 0x002800,
- .model_id = 0x000000,
+ .model = 0x000000,
.workarounds = SBP2_WORKAROUND_DELAY_INQUIRY |
SBP2_WORKAROUND_POWER_CONDITION,
},
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
},
/* PL-3507 bridge with Prolific firmware */ {
.firmware_revision = 0x012800,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_POWER_CONDITION,
},
/* Symbios bridge */ {
.firmware_revision = 0xa0b800,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
.firmware_revision = 0x002600,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
+ /*
+ * iPod 2nd generation: needs 128k max transfer size workaround
+ * iPod 3rd generation: needs fix capacity workaround
+ */
+ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000000,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS |
+ SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod 4th generation */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x000021,
+ .model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x000022,
+ .model = 0x000022,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x000023,
+ .model = 0x000023,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod Photo */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x00007e,
+ .model = 0x00007e,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
}
};
struct csr1212_keyval *kv;
struct csr1212_dentry *dentry;
u64 management_agent_addr;
- u32 unit_characteristics, firmware_revision;
+ u32 unit_characteristics, firmware_revision, model;
unsigned workarounds;
int i;
management_agent_addr = 0;
unit_characteristics = 0;
- firmware_revision = 0;
+ firmware_revision = SBP2_ROM_VALUE_MISSING;
+ model = ud->flags & UNIT_DIRECTORY_MODEL_ID ?
+ ud->model_id : SBP2_ROM_VALUE_MISSING;
csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
switch (kv->key.id) {
sbp2_workarounds_table[i].firmware_revision !=
(firmware_revision & 0xffff00))
continue;
- if (sbp2_workarounds_table[i].model_id !=
+ if (sbp2_workarounds_table[i].model !=
SBP2_ROM_VALUE_WILDCARD &&
- sbp2_workarounds_table[i].model_id != ud->model_id)
+ sbp2_workarounds_table[i].model != model)
continue;
workarounds |= sbp2_workarounds_table[i].workarounds;
break;
NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
workarounds, firmware_revision,
ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
- ud->model_id);
+ model);
/* We would need one SCSI host template for each target to adjust
* max_sectors on the fly, therefore warn only. */
if (h_ret != H_SUCCESS) {
ehca_err(device, "hipz_h_alloc_resource_cq() failed "
- "h_ret=%li device=%p", h_ret, device);
+ "h_ret=%lli device=%p", h_ret, device);
cq = ERR_PTR(ehca2ib_return_code(h_ret));
goto create_cq_exit2;
}
if (h_ret < H_SUCCESS) {
ehca_err(device, "hipz_h_register_rpage_cq() failed "
- "ehca_cq=%p cq_num=%x h_ret=%li counter=%i "
+ "ehca_cq=%p cq_num=%x h_ret=%lli counter=%i "
"act_pages=%i", my_cq, my_cq->cq_number,
h_ret, counter, param.act_pages);
cq = ERR_PTR(-EINVAL);
if ((h_ret != H_SUCCESS) || vpage) {
ehca_err(device, "Registration of pages not "
"complete ehca_cq=%p cq_num=%x "
- "h_ret=%li", my_cq, my_cq->cq_number,
+ "h_ret=%lli", my_cq, my_cq->cq_number,
h_ret);
cq = ERR_PTR(-EAGAIN);
goto create_cq_exit4;
} else {
if (h_ret != H_PAGE_REGISTERED) {
ehca_err(device, "Registration of page failed "
- "ehca_cq=%p cq_num=%x h_ret=%li "
+ "ehca_cq=%p cq_num=%x h_ret=%lli "
"counter=%i act_pages=%i",
my_cq, my_cq->cq_number,
h_ret, counter, param.act_pages);
gal = my_cq->galpas.kernel;
cqx_fec = hipz_galpa_load(gal, CQTEMM_OFFSET(cqx_fec));
- ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%lx",
+ ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%llx",
my_cq, my_cq->cq_number, cqx_fec);
my_cq->ib_cq.cqe = my_cq->nr_of_entries =
h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 1);
if (h_ret != H_SUCCESS)
ehca_err(device, "hipz_h_destroy_cq() failed ehca_cq=%p "
- "cq_num=%x h_ret=%li", my_cq, my_cq->cq_number, h_ret);
+ "cq_num=%x h_ret=%lli", my_cq, my_cq->cq_number, h_ret);
create_cq_exit2:
write_lock_irqsave(&ehca_cq_idr_lock, flags);
h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 0);
if (h_ret == H_R_STATE) {
/* cq in err: read err data and destroy it forcibly */
- ehca_dbg(device, "ehca_cq=%p cq_num=%x ressource=%lx in err "
+ ehca_dbg(device, "ehca_cq=%p cq_num=%x resource=%llx in err "
"state. Try to delete it forcibly.",
my_cq, cq_num, my_cq->ipz_cq_handle.handle);
ehca_error_data(shca, my_cq, my_cq->ipz_cq_handle.handle);
cq_num);
}
if (h_ret != H_SUCCESS) {
- ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%li "
+ ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%lli "
"ehca_cq=%p cq_num=%x", h_ret, my_cq, cq_num);
return ehca2ib_return_code(h_ret);
}
hret = hipz_h_modify_port(shca->ipz_hca_handle, port,
cap, props->init_type, port_modify_mask);
if (hret != H_SUCCESS) {
- ehca_err(&shca->ib_device, "Modify port failed h_ret=%li",
+ ehca_err(&shca->ib_device, "Modify port failed h_ret=%lli",
hret);
ret = -EINVAL;
}
return;
ehca_err(&shca->ib_device,
- "QP 0x%x (resource=%lx) has errors.",
+ "QP 0x%x (resource=%llx) has errors.",
qp->ib_qp.qp_num, resource);
break;
}
struct ehca_cq *cq = (struct ehca_cq *)data;
ehca_err(&shca->ib_device,
- "CQ 0x%x (resource=%lx) has errors.",
+ "CQ 0x%x (resource=%llx) has errors.",
cq->cq_number, resource);
break;
}
default:
ehca_err(&shca->ib_device,
- "Unknown error type: %lx on %s.",
+ "Unknown error type: %llx on %s.",
type, shca->ib_device.name);
break;
}
- ehca_err(&shca->ib_device, "Error data is available: %lx.", resource);
+ ehca_err(&shca->ib_device, "Error data is available: %llx.", resource);
ehca_err(&shca->ib_device, "EHCA ----- error data begin "
"---------------------------------------------------");
- ehca_dmp(rblock, length, "resource=%lx", resource);
+ ehca_dmp(rblock, length, "resource=%llx", resource);
ehca_err(&shca->ib_device, "EHCA ----- error data end "
"----------------------------------------------------");
if (ret == H_R_STATE)
ehca_err(&shca->ib_device,
- "No error data is available: %lx.", resource);
+ "No error data is available: %llx.", resource);
else if (ret == H_SUCCESS) {
int length;
print_error_data(shca, data, rblock, length);
} else
ehca_err(&shca->ib_device,
- "Error data could not be fetched: %lx", resource);
+ "Error data could not be fetched: %llx", resource);
ehca_free_fw_ctrlblock(rblock);
struct ehca_cq *cq;
eqe_value = eqe->entry;
- ehca_dbg(&shca->ib_device, "eqe_value=%lx", eqe_value);
+ ehca_dbg(&shca->ib_device, "eqe_value=%llx", eqe_value);
if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) {
ehca_dbg(&shca->ib_device, "Got completion event");
token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value);
ret = hipz_h_eoi(eq->ist);
if (ret != H_SUCCESS)
ehca_err(&shca->ib_device,
- "bad return code EOI -rc = %ld\n", ret);
+ "bad return code EOI -rc = %lld\n", ret);
ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt);
}
if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE))
h_ret = hipz_h_query_hca(shca->ipz_hca_handle, rblock);
if (h_ret != H_SUCCESS) {
- ehca_gen_err("Cannot query device properties. h_ret=%li",
+ ehca_gen_err("Cannot query device properties. h_ret=%lli",
h_ret);
ret = -EPERM;
goto sense_attributes1;
port = (struct hipz_query_port *)rblock;
h_ret = hipz_h_query_port(shca->ipz_hca_handle, 1, port);
if (h_ret != H_SUCCESS) {
- ehca_gen_err("Cannot query port properties. h_ret=%li",
+ ehca_gen_err("Cannot query port properties. h_ret=%lli",
h_ret);
ret = -EPERM;
goto sense_attributes1;
{
struct ehca_shca *shca = dev->driver_data;
- return sprintf(buf, "%lx\n", shca->ipz_hca_handle.handle);
+ return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle);
}
static DEVICE_ATTR(adapter_handle, S_IRUGO, ehca_show_adapter_handle, NULL);
if (h_ret != H_SUCCESS)
ehca_err(ibqp->device,
"ehca_qp=%p qp_num=%x hipz_h_attach_mcqp() failed "
- "h_ret=%li", my_qp, ibqp->qp_num, h_ret);
+ "h_ret=%lli", my_qp, ibqp->qp_num, h_ret);
return ehca2ib_return_code(h_ret);
}
if (h_ret != H_SUCCESS)
ehca_err(ibqp->device,
"ehca_qp=%p qp_num=%x hipz_h_detach_mcqp() failed "
- "h_ret=%li", my_qp, ibqp->qp_num, h_ret);
+ "h_ret=%lli", my_qp, ibqp->qp_num, h_ret);
return ehca2ib_return_code(h_ret);
}
}
if ((size == 0) ||
(((u64)iova_start + size) < (u64)iova_start)) {
- ehca_err(pd->device, "bad input values: size=%lx iova_start=%p",
+ ehca_err(pd->device, "bad input values: size=%llx iova_start=%p",
size, iova_start);
ib_mr = ERR_PTR(-EINVAL);
goto reg_phys_mr_exit0;
}
if (length == 0 || virt + length < virt) {
- ehca_err(pd->device, "bad input values: length=%lx "
- "virt_base=%lx", length, virt);
+ ehca_err(pd->device, "bad input values: length=%llx "
+ "virt_base=%llx", length, virt);
ib_mr = ERR_PTR(-EINVAL);
goto reg_user_mr_exit0;
}
&e_mr->ib.ib_mr.rkey);
if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) {
ehca_warn(pd->device, "failed to register mr "
- "with hwpage_size=%lx", hwpage_size);
+ "with hwpage_size=%llx", hwpage_size);
ehca_info(pd->device, "try to register mr with "
"kpage_size=%lx", PAGE_SIZE);
/*
goto rereg_phys_mr_exit1;
if ((new_size == 0) ||
(((u64)iova_start + new_size) < (u64)iova_start)) {
- ehca_err(mr->device, "bad input values: new_size=%lx "
+ ehca_err(mr->device, "bad input values: new_size=%llx "
"iova_start=%p", new_size, iova_start);
ret = -EINVAL;
goto rereg_phys_mr_exit1;
h_ret = hipz_h_query_mr(shca->ipz_hca_handle, e_mr, &hipzout);
if (h_ret != H_SUCCESS) {
- ehca_err(mr->device, "hipz_mr_query failed, h_ret=%li mr=%p "
- "hca_hndl=%lx mr_hndl=%lx lkey=%x",
+ ehca_err(mr->device, "hipz_mr_query failed, h_ret=%lli mr=%p "
+ "hca_hndl=%llx mr_hndl=%llx lkey=%x",
h_ret, mr, shca->ipz_hca_handle.handle,
e_mr->ipz_mr_handle.handle, mr->lkey);
ret = ehca2ib_return_code(h_ret);
/* TODO: BUSY: MR still has bound window(s) */
h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
if (h_ret != H_SUCCESS) {
- ehca_err(mr->device, "hipz_free_mr failed, h_ret=%li shca=%p "
- "e_mr=%p hca_hndl=%lx mr_hndl=%lx mr->lkey=%x",
+ ehca_err(mr->device, "hipz_free_mr failed, h_ret=%lli shca=%p "
+ "e_mr=%p hca_hndl=%llx mr_hndl=%llx mr->lkey=%x",
h_ret, shca, e_mr, shca->ipz_hca_handle.handle,
e_mr->ipz_mr_handle.handle, mr->lkey);
ret = ehca2ib_return_code(h_ret);
h_ret = hipz_h_alloc_resource_mw(shca->ipz_hca_handle, e_mw,
e_pd->fw_pd, &hipzout);
if (h_ret != H_SUCCESS) {
- ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%li "
- "shca=%p hca_hndl=%lx mw=%p",
+ ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%lli "
+ "shca=%p hca_hndl=%llx mw=%p",
h_ret, shca, shca->ipz_hca_handle.handle, e_mw);
ib_mw = ERR_PTR(ehca2ib_return_code(h_ret));
goto alloc_mw_exit1;
h_ret = hipz_h_free_resource_mw(shca->ipz_hca_handle, e_mw);
if (h_ret != H_SUCCESS) {
- ehca_err(mw->device, "hipz_free_mw failed, h_ret=%li shca=%p "
- "mw=%p rkey=%x hca_hndl=%lx mw_hndl=%lx",
+ ehca_err(mw->device, "hipz_free_mw failed, h_ret=%lli shca=%p "
+ "mw=%p rkey=%x hca_hndl=%llx mw_hndl=%llx",
h_ret, shca, mw, mw->rkey, shca->ipz_hca_handle.handle,
e_mw->ipz_mw_handle.handle);
return ehca2ib_return_code(h_ret);
goto map_phys_fmr_exit0;
if (iova % e_fmr->fmr_page_size) {
/* only whole-numbered pages */
- ehca_err(fmr->device, "bad iova, iova=%lx fmr_page_size=%x",
+ ehca_err(fmr->device, "bad iova, iova=%llx fmr_page_size=%x",
iova, e_fmr->fmr_page_size);
ret = -EINVAL;
goto map_phys_fmr_exit0;
map_phys_fmr_exit0:
if (ret)
ehca_err(fmr->device, "ret=%i fmr=%p page_list=%p list_len=%x "
- "iova=%lx", ret, fmr, page_list, list_len, iova);
+ "iova=%llx", ret, fmr, page_list, list_len, iova);
return ret;
} /* end ehca_map_phys_fmr() */
h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr);
if (h_ret != H_SUCCESS) {
- ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%li e_fmr=%p "
- "hca_hndl=%lx fmr_hndl=%lx fmr->lkey=%x",
+ ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%lli e_fmr=%p "
+ "hca_hndl=%llx fmr_hndl=%llx fmr->lkey=%x",
h_ret, e_fmr, shca->ipz_hca_handle.handle,
e_fmr->ipz_mr_handle.handle, fmr->lkey);
ret = ehca2ib_return_code(h_ret);
(u64)iova_start, size, hipz_acl,
e_pd->fw_pd, &hipzout);
if (h_ret != H_SUCCESS) {
- ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%li "
- "hca_hndl=%lx", h_ret, shca->ipz_hca_handle.handle);
+ ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%lli "
+ "hca_hndl=%llx", h_ret, shca->ipz_hca_handle.handle);
ret = ehca2ib_return_code(h_ret);
goto ehca_reg_mr_exit0;
}
ehca_reg_mr_exit1:
h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
if (h_ret != H_SUCCESS) {
- ehca_err(&shca->ib_device, "h_ret=%li shca=%p e_mr=%p "
- "iova_start=%p size=%lx acl=%x e_pd=%p lkey=%x "
- "pginfo=%p num_kpages=%lx num_hwpages=%lx ret=%i",
+ ehca_err(&shca->ib_device, "h_ret=%lli shca=%p e_mr=%p "
+ "iova_start=%p size=%llx acl=%x e_pd=%p lkey=%x "
+ "pginfo=%p num_kpages=%llx num_hwpages=%llx ret=%i",
h_ret, shca, e_mr, iova_start, size, acl, e_pd,
hipzout.lkey, pginfo, pginfo->num_kpages,
pginfo->num_hwpages, ret);
ehca_reg_mr_exit0:
if (ret)
ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p "
- "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p "
- "num_kpages=%lx num_hwpages=%lx",
+ "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p "
+ "num_kpages=%llx num_hwpages=%llx",
ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo,
pginfo->num_kpages, pginfo->num_hwpages);
return ret;
*/
if (h_ret != H_SUCCESS) {
ehca_err(&shca->ib_device, "last "
- "hipz_reg_rpage_mr failed, h_ret=%li "
- "e_mr=%p i=%x hca_hndl=%lx mr_hndl=%lx"
+ "hipz_reg_rpage_mr failed, h_ret=%lli "
+ "e_mr=%p i=%x hca_hndl=%llx mr_hndl=%llx"
" lkey=%x", h_ret, e_mr, i,
shca->ipz_hca_handle.handle,
e_mr->ipz_mr_handle.handle,
ret = 0;
} else if (h_ret != H_PAGE_REGISTERED) {
ehca_err(&shca->ib_device, "hipz_reg_rpage_mr failed, "
- "h_ret=%li e_mr=%p i=%x lkey=%x hca_hndl=%lx "
- "mr_hndl=%lx", h_ret, e_mr, i,
+ "h_ret=%lli e_mr=%p i=%x lkey=%x hca_hndl=%llx "
+ "mr_hndl=%llx", h_ret, e_mr, i,
e_mr->ib.ib_mr.lkey,
shca->ipz_hca_handle.handle,
e_mr->ipz_mr_handle.handle);
ehca_reg_mr_rpages_exit0:
if (ret)
ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p pginfo=%p "
- "num_kpages=%lx num_hwpages=%lx", ret, shca, e_mr,
+ "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr,
pginfo, pginfo->num_kpages, pginfo->num_hwpages);
return ret;
} /* end ehca_reg_mr_rpages() */
ret = ehca_set_pagebuf(pginfo, pginfo->num_hwpages, kpage);
if (ret) {
ehca_err(&shca->ib_device, "set pagebuf failed, e_mr=%p "
- "pginfo=%p type=%x num_kpages=%lx num_hwpages=%lx "
+ "pginfo=%p type=%x num_kpages=%llx num_hwpages=%llx "
"kpage=%p", e_mr, pginfo, pginfo->type,
pginfo->num_kpages, pginfo->num_hwpages, kpage);
goto ehca_rereg_mr_rereg1_exit1;
* (MW bound or MR is shared)
*/
ehca_warn(&shca->ib_device, "hipz_h_reregister_pmr failed "
- "(Rereg1), h_ret=%li e_mr=%p", h_ret, e_mr);
+ "(Rereg1), h_ret=%lli e_mr=%p", h_ret, e_mr);
*pginfo = pginfo_save;
ret = -EAGAIN;
} else if ((u64 *)hipzout.vaddr != iova_start) {
ehca_err(&shca->ib_device, "PHYP changed iova_start in "
- "rereg_pmr, iova_start=%p iova_start_out=%lx e_mr=%p "
- "mr_handle=%lx lkey=%x lkey_out=%x", iova_start,
+ "rereg_pmr, iova_start=%p iova_start_out=%llx e_mr=%p "
+ "mr_handle=%llx lkey=%x lkey_out=%x", iova_start,
hipzout.vaddr, e_mr, e_mr->ipz_mr_handle.handle,
e_mr->ib.ib_mr.lkey, hipzout.lkey);
ret = -EFAULT;
ehca_rereg_mr_rereg1_exit0:
if ( ret && (ret != -EAGAIN) )
ehca_err(&shca->ib_device, "ret=%i lkey=%x rkey=%x "
- "pginfo=%p num_kpages=%lx num_hwpages=%lx",
+ "pginfo=%p num_kpages=%llx num_hwpages=%llx",
ret, *lkey, *rkey, pginfo, pginfo->num_kpages,
pginfo->num_hwpages);
return ret;
(e_mr->num_hwpages > MAX_RPAGES) ||
(pginfo->num_hwpages > e_mr->num_hwpages)) {
ehca_dbg(&shca->ib_device, "Rereg3 case, "
- "pginfo->num_hwpages=%lx e_mr->num_hwpages=%x",
+ "pginfo->num_hwpages=%llx e_mr->num_hwpages=%x",
pginfo->num_hwpages, e_mr->num_hwpages);
rereg_1_hcall = 0;
rereg_3_hcall = 1;
h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
if (h_ret != H_SUCCESS) {
ehca_err(&shca->ib_device, "hipz_free_mr failed, "
- "h_ret=%li e_mr=%p hca_hndl=%lx mr_hndl=%lx "
+ "h_ret=%lli e_mr=%p hca_hndl=%llx mr_hndl=%llx "
"mr->lkey=%x",
h_ret, e_mr, shca->ipz_hca_handle.handle,
e_mr->ipz_mr_handle.handle,
ehca_rereg_mr_exit0:
if (ret)
ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p "
- "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p "
- "num_kpages=%lx lkey=%x rkey=%x rereg_1_hcall=%x "
+ "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p "
+ "num_kpages=%llx lkey=%x rkey=%x rereg_1_hcall=%x "
"rereg_3_hcall=%x", ret, shca, e_mr, iova_start, size,
acl, e_pd, pginfo, pginfo->num_kpages, *lkey, *rkey,
rereg_1_hcall, rereg_3_hcall);
* FMRs are not shared and no MW bound to FMRs
*/
ehca_err(&shca->ib_device, "hipz_reregister_pmr failed "
- "(Rereg1), h_ret=%li e_fmr=%p hca_hndl=%lx "
- "mr_hndl=%lx lkey=%x lkey_out=%x",
+ "(Rereg1), h_ret=%lli e_fmr=%p hca_hndl=%llx "
+ "mr_hndl=%llx lkey=%x lkey_out=%x",
h_ret, e_fmr, shca->ipz_hca_handle.handle,
e_fmr->ipz_mr_handle.handle,
e_fmr->ib.ib_fmr.lkey, hipzout.lkey);
h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr);
if (h_ret != H_SUCCESS) {
ehca_err(&shca->ib_device, "hipz_free_mr failed, "
- "h_ret=%li e_fmr=%p hca_hndl=%lx mr_hndl=%lx "
+ "h_ret=%lli e_fmr=%p hca_hndl=%llx mr_hndl=%llx "
"lkey=%x",
h_ret, e_fmr, shca->ipz_hca_handle.handle,
e_fmr->ipz_mr_handle.handle,
(u64)iova_start, hipz_acl, e_pd->fw_pd,
&hipzout);
if (h_ret != H_SUCCESS) {
- ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li "
+ ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli "
"shca=%p e_origmr=%p e_newmr=%p iova_start=%p acl=%x "
- "e_pd=%p hca_hndl=%lx mr_hndl=%lx lkey=%x",
+ "e_pd=%p hca_hndl=%llx mr_hndl=%llx lkey=%x",
h_ret, shca, e_origmr, e_newmr, iova_start, acl, e_pd,
shca->ipz_hca_handle.handle,
e_origmr->ipz_mr_handle.handle,
&e_mr->ib.ib_mr.rkey);
if (ret) {
ehca_err(&shca->ib_device, "reg of internal max MR failed, "
- "e_mr=%p iova_start=%p size_maxmr=%lx num_kpages=%x "
+ "e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x "
"num_hwpages=%x", e_mr, iova_start, size_maxmr,
num_kpages, num_hwpages);
goto ehca_reg_internal_maxmr_exit1;
(u64)iova_start, hipz_acl, e_pd->fw_pd,
&hipzout);
if (h_ret != H_SUCCESS) {
- ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li "
- "e_origmr=%p hca_hndl=%lx mr_hndl=%lx lkey=%x",
+ ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli "
+ "e_origmr=%p hca_hndl=%llx mr_hndl=%llx lkey=%x",
h_ret, e_origmr, shca->ipz_hca_handle.handle,
e_origmr->ipz_mr_handle.handle,
e_origmr->ib.ib_mr.lkey);
/* check first buffer */
if (((u64)iova_start & ~PAGE_MASK) != (pbuf->addr & ~PAGE_MASK)) {
ehca_gen_err("iova_start/addr mismatch, iova_start=%p "
- "pbuf->addr=%lx pbuf->size=%lx",
+ "pbuf->addr=%llx pbuf->size=%llx",
iova_start, pbuf->addr, pbuf->size);
return -EINVAL;
}
if (((pbuf->addr + pbuf->size) % PAGE_SIZE) &&
(num_phys_buf > 1)) {
- ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%lx "
- "pbuf->size=%lx", pbuf->addr, pbuf->size);
+ ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%llx "
+ "pbuf->size=%llx", pbuf->addr, pbuf->size);
return -EINVAL;
}
for (i = 0; i < num_phys_buf; i++) {
if ((i > 0) && (pbuf->addr % PAGE_SIZE)) {
- ehca_gen_err("bad address, i=%x pbuf->addr=%lx "
- "pbuf->size=%lx",
+ ehca_gen_err("bad address, i=%x pbuf->addr=%llx "
+ "pbuf->size=%llx",
i, pbuf->addr, pbuf->size);
return -EINVAL;
}
if (((i > 0) && /* not 1st */
(i < (num_phys_buf - 1)) && /* not last */
(pbuf->size % PAGE_SIZE)) || (pbuf->size == 0)) {
- ehca_gen_err("bad size, i=%x pbuf->size=%lx",
+ ehca_gen_err("bad size, i=%x pbuf->size=%llx",
i, pbuf->size);
return -EINVAL;
}
page = page_list;
for (i = 0; i < list_len; i++) {
if (*page % e_fmr->fmr_page_size) {
- ehca_gen_err("bad page, i=%x *page=%lx page=%p fmr=%p "
+ ehca_gen_err("bad page, i=%x *page=%llx page=%p fmr=%p "
"fmr_page_size=%x", i, *page, page, e_fmr,
e_fmr->fmr_page_size);
return -EINVAL;
(pginfo->next_hwpage *
pginfo->hwpage_size));
if ( !(*kpage) ) {
- ehca_gen_err("pgaddr=%lx "
- "chunk->page_list[i]=%lx "
- "i=%x next_hwpage=%lx",
+ ehca_gen_err("pgaddr=%llx "
+ "chunk->page_list[i]=%llx "
+ "i=%x next_hwpage=%llx",
pgaddr, (u64)sg_dma_address(
&chunk->page_list[i]),
i, pginfo->next_hwpage);
for (t = start_idx; t <= end_idx; t++) {
u64 pgaddr = page_to_pfn(sg_page(&page_list[t])) << PAGE_SHIFT;
if (ehca_debug_level >= 3)
- ehca_gen_dbg("chunk_page=%lx value=%016lx", pgaddr,
+ ehca_gen_dbg("chunk_page=%llx value=%016llx", pgaddr,
*(u64 *)abs_to_virt(phys_to_abs(pgaddr)));
if (pgaddr - PAGE_SIZE != *prev_pgaddr) {
- ehca_gen_err("uncontiguous page found pgaddr=%lx "
- "prev_pgaddr=%lx page_list_i=%x",
+ ehca_gen_err("uncontiguous page found pgaddr=%llx "
+ "prev_pgaddr=%llx page_list_i=%x",
pgaddr, *prev_pgaddr, t);
return -EINVAL;
}
<< PAGE_SHIFT );
*kpage = phys_to_abs(pgaddr);
if ( !(*kpage) ) {
- ehca_gen_err("pgaddr=%lx i=%x",
+ ehca_gen_err("pgaddr=%llx i=%x",
pgaddr, i);
ret = -EFAULT;
return ret;
if (pginfo->hwpage_cnt) {
ehca_gen_err(
"invalid alignment "
- "pgaddr=%lx i=%x "
- "mr_pgsize=%lx",
+ "pgaddr=%llx i=%x "
+ "mr_pgsize=%llx",
pgaddr, i,
pginfo->hwpage_size);
ret = -EFAULT;
if (ehca_debug_level >= 3) {
u64 val = *(u64 *)abs_to_virt(
phys_to_abs(pgaddr));
- ehca_gen_dbg("kpage=%lx chunk_page=%lx "
- "value=%016lx",
+ ehca_gen_dbg("kpage=%llx chunk_page=%llx "
+ "value=%016llx",
*kpage, pgaddr, val);
}
prev_pgaddr = pgaddr;
if ((pginfo->kpage_cnt >= pginfo->num_kpages) ||
(pginfo->hwpage_cnt >= pginfo->num_hwpages)) {
ehca_gen_err("kpage_cnt >= num_kpages, "
- "kpage_cnt=%lx num_kpages=%lx "
- "hwpage_cnt=%lx "
- "num_hwpages=%lx i=%x",
+ "kpage_cnt=%llx num_kpages=%llx "
+ "hwpage_cnt=%llx "
+ "num_hwpages=%llx i=%x",
pginfo->kpage_cnt,
pginfo->num_kpages,
pginfo->hwpage_cnt,
(pbuf->addr & ~(pginfo->hwpage_size - 1)) +
(pginfo->next_hwpage * pginfo->hwpage_size));
if ( !(*kpage) && pbuf->addr ) {
- ehca_gen_err("pbuf->addr=%lx pbuf->size=%lx "
- "next_hwpage=%lx", pbuf->addr,
+ ehca_gen_err("pbuf->addr=%llx pbuf->size=%llx "
+ "next_hwpage=%llx", pbuf->addr,
pbuf->size, pginfo->next_hwpage);
return -EFAULT;
}
*kpage = phys_to_abs((*fmrlist & ~(pginfo->hwpage_size - 1)) +
pginfo->next_hwpage * pginfo->hwpage_size);
if ( !(*kpage) ) {
- ehca_gen_err("*fmrlist=%lx fmrlist=%p "
- "next_listelem=%lx next_hwpage=%lx",
+ ehca_gen_err("*fmrlist=%llx fmrlist=%p "
+ "next_listelem=%llx next_hwpage=%llx",
*fmrlist, fmrlist,
pginfo->u.fmr.next_listelem,
pginfo->next_hwpage);
~(pginfo->hwpage_size - 1));
if (prev + pginfo->u.fmr.fmr_pgsize != p) {
ehca_gen_err("uncontiguous fmr pages "
- "found prev=%lx p=%lx "
+ "found prev=%llx p=%llx "
"idx=%x", prev, p, i + j);
return -EINVAL;
}
if (cnt == (nr_q_pages - 1)) { /* last page! */
if (h_ret != expected_hret) {
ehca_err(ib_dev, "hipz_qp_register_rpage() "
- "h_ret=%li", h_ret);
+ "h_ret=%lli", h_ret);
ret = ehca2ib_return_code(h_ret);
goto init_qp_queue1;
}
} else {
if (h_ret != H_PAGE_REGISTERED) {
ehca_err(ib_dev, "hipz_qp_register_rpage() "
- "h_ret=%li", h_ret);
+ "h_ret=%lli", h_ret);
ret = ehca2ib_return_code(h_ret);
goto init_qp_queue1;
}
h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms);
if (h_ret != H_SUCCESS) {
- ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%li",
+ ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli",
h_ret);
ret = ehca2ib_return_code(h_ret);
goto create_qp_exit1;
mqpcb, my_qp->galpas.kernel);
if (hret != H_SUCCESS) {
ehca_err(pd->device, "Could not modify SRQ to INIT "
- "ehca_qp=%p qp_num=%x h_ret=%li",
+ "ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, my_qp->real_qp_num, hret);
goto create_srq2;
}
mqpcb, my_qp->galpas.kernel);
if (hret != H_SUCCESS) {
ehca_err(pd->device, "Could not enable SRQ "
- "ehca_qp=%p qp_num=%x h_ret=%li",
+ "ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, my_qp->real_qp_num, hret);
goto create_srq2;
}
mqpcb, my_qp->galpas.kernel);
if (hret != H_SUCCESS) {
ehca_err(pd->device, "Could not modify SRQ to RTR "
- "ehca_qp=%p qp_num=%x h_ret=%li",
+ "ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, my_qp->real_qp_num, hret);
goto create_srq2;
}
&bad_send_wqe_p, NULL, 2);
if (h_ret != H_SUCCESS) {
ehca_err(&shca->ib_device, "hipz_h_disable_and_get_wqe() failed"
- " ehca_qp=%p qp_num=%x h_ret=%li",
+ " ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, qp_num, h_ret);
return ehca2ib_return_code(h_ret);
}
if (ipz_queue_abs_to_offset(ipz_queue, wqe_p, &q_ofs)) {
ehca_gen_err("Invalid offset for calculating left cqes "
- "wqe_p=%#lx wqe_v=%p\n", wqe_p, wqe_v);
+ "wqe_p=%#llx wqe_v=%p\n", wqe_p, wqe_v);
return -EFAULT;
}
&send_wqe_p, &recv_wqe_p, 4);
if (h_ret != H_SUCCESS) {
ehca_err(&shca->ib_device, "disable_and_get_wqe() "
- "failed ehca_qp=%p qp_num=%x h_ret=%li",
+ "failed ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, qp_num, h_ret);
return ehca2ib_return_code(h_ret);
}
mqpcb, my_qp->galpas.kernel);
if (h_ret != H_SUCCESS) {
ehca_err(ibqp->device, "hipz_h_query_qp() failed "
- "ehca_qp=%p qp_num=%x h_ret=%li",
+ "ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, ibqp->qp_num, h_ret);
ret = ehca2ib_return_code(h_ret);
goto modify_qp_exit1;
if (h_ret != H_SUCCESS) {
ret = ehca2ib_return_code(h_ret);
- ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%li "
+ ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%lli "
"ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num);
goto modify_qp_exit2;
}
ret = ehca2ib_return_code(h_ret);
ehca_err(ibqp->device, "ENABLE in context of "
"RESET_2_INIT failed! Maybe you didn't get "
- "a LID h_ret=%li ehca_qp=%p qp_num=%x",
+ "a LID h_ret=%lli ehca_qp=%p qp_num=%x",
h_ret, my_qp, ibqp->qp_num);
goto modify_qp_exit2;
}
if (h_ret != H_SUCCESS) {
ret = ehca2ib_return_code(h_ret);
ehca_err(qp->device, "hipz_h_query_qp() failed "
- "ehca_qp=%p qp_num=%x h_ret=%li",
+ "ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, qp->qp_num, h_ret);
goto query_qp_exit1;
}
if (h_ret != H_SUCCESS) {
ret = ehca2ib_return_code(h_ret);
- ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%li "
+ ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%lli "
"ehca_qp=%p qp_num=%x",
h_ret, my_qp, my_qp->real_qp_num);
}
if (h_ret != H_SUCCESS) {
ret = ehca2ib_return_code(h_ret);
ehca_err(srq->device, "hipz_h_query_qp() failed "
- "ehca_qp=%p qp_num=%x h_ret=%li",
+ "ehca_qp=%p qp_num=%x h_ret=%lli",
my_qp, my_qp->real_qp_num, h_ret);
goto query_srq_exit1;
}
h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
if (h_ret != H_SUCCESS) {
- ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li "
+ ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%lli "
"ehca_qp=%p qp_num=%x", h_ret, my_qp, qp_num);
return ehca2ib_return_code(h_ret);
}
offset = qmap->next_wqe_idx * ipz_queue->qe_size;
wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
if (!wqe) {
- ehca_err(cq->device, "Invalid wqe offset=%#lx on "
+ ehca_err(cq->device, "Invalid wqe offset=%#llx on "
"qp_num=%#x", offset, my_qp->real_qp_num);
return nr;
}
if (ret != H_SUCCESS) {
ehca_err(&shca->ib_device,
- "Can't define AQP1 for port %x. h_ret=%li",
+ "Can't define AQP1 for port %x. h_ret=%lli",
port, ret);
return ret;
}
unsigned char *deb = (unsigned char *)(adr); \
for (x = 0; x < l; x += 16) { \
printk(KERN_INFO "EHCA_DMP:%s " format \
- " adr=%p ofs=%04x %016lx %016lx\n", \
+ " adr=%p ofs=%04x %016llx %016llx\n", \
__func__, ##args, deb, x, \
*((u64 *)&deb[0]), *((u64 *)&deb[8])); \
deb += 16; \
physical = galpas->user.fw_handle;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- ehca_gen_dbg("vsize=%lx physical=%lx", vsize, physical);
+ ehca_gen_dbg("vsize=%llx physical=%llx", vsize, physical);
/* VM_IO | VM_RESERVED are set by remap_pfn_range() */
ret = remap_4k_pfn(vma, vma->vm_start, physical >> EHCA_PAGESHIFT,
vma->vm_page_prot);
u32 *eq_ist)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
u64 allocate_controls;
/* resource type */
*eq_ist = (u32)outs[5];
if (ret == H_NOT_ENOUGH_RESOURCES)
- ehca_gen_err("Not enough resource - ret=%li ", ret);
+ ehca_gen_err("Not enough resource - ret=%lli ", ret);
return ret;
}
struct ehca_alloc_cq_parms *param)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
adapter_handle.handle, /* r4 */
hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]);
if (ret == H_NOT_ENOUGH_RESOURCES)
- ehca_gen_err("Not enough resources. ret=%li", ret);
+ ehca_gen_err("Not enough resources. ret=%lli", ret);
return ret;
}
{
u64 ret;
u64 allocate_controls, max_r10_reg, r11, r12;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
allocate_controls =
EHCA_BMASK_SET(H_ALL_RES_QP_ENHANCED_OPS, parms->ext_type)
hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]);
if (ret == H_NOT_ENOUGH_RESOURCES)
- ehca_gen_err("Not enough resources. ret=%li", ret);
+ ehca_gen_err("Not enough resources. ret=%lli", ret);
return ret;
}
const u64 count)
{
if (count != 1) {
- ehca_gen_err("Ppage counter=%lx", count);
+ ehca_gen_err("Ppage counter=%llx", count);
return H_PARAMETER;
}
return hipz_h_register_rpage(adapter_handle,
const struct h_galpa gal)
{
if (count != 1) {
- ehca_gen_err("Page counter=%lx", count);
+ ehca_gen_err("Page counter=%llx", count);
return H_PARAMETER;
}
const struct h_galpa galpa)
{
if (count > 1) {
- ehca_gen_err("Page counter=%lx", count);
+ ehca_gen_err("Page counter=%llx", count);
return H_PARAMETER;
}
int dis_and_get_function_code)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_DISABLE_AND_GETC, outs,
adapter_handle.handle, /* r4 */
struct h_galpa gal)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_MODIFY_QP, outs,
adapter_handle.handle, /* r4 */
qp_handle.handle, /* r5 */
0, 0, 0, 0, 0);
if (ret == H_NOT_ENOUGH_RESOURCES)
- ehca_gen_err("Insufficient resources ret=%li", ret);
+ ehca_gen_err("Insufficient resources ret=%lli", ret);
return ret;
}
struct ehca_qp *qp)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = hcp_galpas_dtor(&qp->galpas);
if (ret) {
qp->ipz_qp_handle.handle, /* r6 */
0, 0, 0, 0, 0, 0);
if (ret == H_HARDWARE)
- ehca_gen_err("HCA not operational. ret=%li", ret);
+ ehca_gen_err("HCA not operational. ret=%lli", ret);
ret = ehca_plpar_hcall_norets(H_FREE_RESOURCE,
adapter_handle.handle, /* r4 */
0, 0, 0, 0, 0);
if (ret == H_RESOURCE)
- ehca_gen_err("Resource still in use. ret=%li", ret);
+ ehca_gen_err("Resource still in use. ret=%lli", ret);
return ret;
}
u32 * bma_qp_nr)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_DEFINE_AQP1, outs,
adapter_handle.handle, /* r4 */
*bma_qp_nr = (u32)outs[1];
if (ret == H_ALIAS_EXIST)
- ehca_gen_err("AQP1 already exists. ret=%li", ret);
+ ehca_gen_err("AQP1 already exists. ret=%lli", ret);
return ret;
}
0, 0);
if (ret == H_NOT_ENOUGH_RESOURCES)
- ehca_gen_err("Not enough resources. ret=%li", ret);
+ ehca_gen_err("Not enough resources. ret=%lli", ret);
return ret;
}
0, 0, 0, 0);
if (ret == H_RESOURCE)
- ehca_gen_err("H_FREE_RESOURCE failed ret=%li ", ret);
+ ehca_gen_err("H_FREE_RESOURCE failed ret=%lli ", ret);
return ret;
}
0, 0, 0, 0, 0);
if (ret == H_RESOURCE)
- ehca_gen_err("Resource in use. ret=%li ", ret);
+ ehca_gen_err("Resource in use. ret=%lli ", ret);
return ret;
}
struct ehca_mr_hipzout_parms *outparms)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
adapter_handle.handle, /* r4 */
if ((count > 1) && (logical_address_of_page & (EHCA_PAGESIZE-1))) {
ehca_gen_err("logical_address_of_page not on a 4k boundary "
- "adapter_handle=%lx mr=%p mr_handle=%lx "
+ "adapter_handle=%llx mr=%p mr_handle=%llx "
"pagesize=%x queue_type=%x "
- "logical_address_of_page=%lx count=%lx",
+ "logical_address_of_page=%llx count=%llx",
adapter_handle.handle, mr,
mr->ipz_mr_handle.handle, pagesize, queue_type,
logical_address_of_page, count);
struct ehca_mr_hipzout_parms *outparms)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_QUERY_MR, outs,
adapter_handle.handle, /* r4 */
struct ehca_mr_hipzout_parms *outparms)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_REREGISTER_PMR, outs,
adapter_handle.handle, /* r4 */
struct ehca_mr_hipzout_parms *outparms)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_REGISTER_SMR, outs,
adapter_handle.handle, /* r4 */
struct ehca_mw_hipzout_parms *outparms)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
adapter_handle.handle, /* r4 */
struct ehca_mw_hipzout_parms *outparms)
{
u64 ret;
- u64 outs[PLPAR_HCALL9_BUFSIZE];
+ unsigned long outs[PLPAR_HCALL9_BUFSIZE];
ret = ehca_plpar_hcall9(H_QUERY_MW, outs,
adapter_handle.handle, /* r4 */
}
static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
- struct mlx4_ib_qp *qp, unsigned *lso_seg_len)
+ struct mlx4_ib_qp *qp, unsigned *lso_seg_len,
+ __be32 *lso_hdr_sz)
{
unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen);
- /* make sure LSO header is written before overwriting stamping */
- wmb();
-
- wqe->mss_hdr_size = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
- wr->wr.ud.hlen);
-
+ *lso_hdr_sz = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
+ wr->wr.ud.hlen);
*lso_seg_len = halign;
return 0;
}
int uninitialized_var(stamp);
int uninitialized_var(size);
unsigned uninitialized_var(seglen);
+ __be32 dummy;
+ __be32 *lso_wqe;
+ __be32 uninitialized_var(lso_hdr_sz);
int i;
spin_lock_irqsave(&qp->sq.lock, flags);
ind = qp->sq_next_wqe;
for (nreq = 0; wr; ++nreq, wr = wr->next) {
+ lso_wqe = &dummy;
+
if (mlx4_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) {
err = -ENOMEM;
*bad_wr = wr;
size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
if (wr->opcode == IB_WR_LSO) {
- err = build_lso_seg(wqe, wr, qp, &seglen);
+ err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz);
if (unlikely(err)) {
*bad_wr = wr;
goto out;
}
+ lso_wqe = (__be32 *) wqe;
wqe += seglen;
size += seglen / 16;
}
for (i = wr->num_sge - 1; i >= 0; --i, --dseg)
set_data_seg(dseg, wr->sg_list + i);
+ /*
+ * Possibly overwrite stamping in cacheline with LSO
+ * segment only after making sure all data segments
+ * are written.
+ */
+ wmb();
+ *lso_wqe = lso_hdr_sz;
+
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
stamp_send_wqe(qp, stamp, size * 16);
ind = pad_wraparound(qp, ind);
}
-
}
out:
ipoib_dbg(priv, "bringing up interface\n");
- set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
+ if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
+ napi_enable(&priv->napi);
if (ipoib_pkey_dev_delay_open(dev))
return 0;
- napi_enable(&priv->napi);
+ if (ipoib_ib_dev_open(dev))
+ goto err_disable;
- if (ipoib_ib_dev_open(dev)) {
- napi_disable(&priv->napi);
- return -EINVAL;
- }
-
- if (ipoib_ib_dev_up(dev)) {
- ipoib_ib_dev_stop(dev, 1);
- napi_disable(&priv->napi);
- return -EINVAL;
- }
+ if (ipoib_ib_dev_up(dev))
+ goto err_stop;
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
struct ipoib_dev_priv *cpriv;
netif_start_queue(dev);
return 0;
+
+err_stop:
+ ipoib_ib_dev_stop(dev, 1);
+
+err_disable:
+ napi_disable(&priv->napi);
+ clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
+
+ return -EINVAL;
}
static int ipoib_stop(struct net_device *dev)
}
if (mcast->logcount++ < 20) {
- if (status == -ETIMEDOUT) {
+ if (status == -ETIMEDOUT || status == -EAGAIN) {
ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n",
mcast->mcmember.mgid.raw, status);
} else {
ppriv = netdev_priv(pdev);
+ rtnl_lock();
mutex_lock(&ppriv->vlan_mutex);
/*
goto device_init_failed;
}
- result = register_netdev(priv->dev);
+ result = register_netdevice(priv->dev);
if (result) {
ipoib_warn(priv, "failed to initialize; error %i", result);
goto register_failed;
list_add_tail(&priv->list, &ppriv->child_intfs);
mutex_unlock(&ppriv->vlan_mutex);
+ rtnl_unlock();
return 0;
sysfs_failed:
ipoib_delete_debug_files(priv->dev);
- unregister_netdev(priv->dev);
+ unregister_netdevice(priv->dev);
register_failed:
ipoib_dev_cleanup(priv->dev);
err:
mutex_unlock(&ppriv->vlan_mutex);
+ rtnl_unlock();
return result;
}
ppriv = netdev_priv(pdev);
+ rtnl_lock();
mutex_lock(&ppriv->vlan_mutex);
list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) {
if (priv->pkey == pkey) {
- unregister_netdev(priv->dev);
+ unregister_netdevice(priv->dev);
ipoib_dev_cleanup(priv->dev);
list_del(&priv->list);
free_netdev(priv->dev);
}
}
mutex_unlock(&ppriv->vlan_mutex);
+ rtnl_unlock();
return ret;
}
return 0;
}
+#ifdef CONFIG_IPPP_FILTER
static int get_filter(void __user *arg, struct sock_filter **p)
{
struct sock_fprog uprog;
*p = code;
return uprog.len;
}
+#endif /* CONFIG_IPPP_FILTER */
/*
* ippp device ioctl
break;
/* If the Guest asked to be stopped, we sleep. The Guest's
- * clock timer or LHCALL_BREAK from the Waker will wake us. */
+ * clock timer or LHREQ_BREAK from the Waker will wake us. */
if (cpu->halted) {
set_current_state(TASK_INTERRUPTIBLE);
schedule();
* kmalloc()ed string, either of which is ok to hand to kfree(). */
if (!IS_ERR(lg->dead))
kfree(lg->dead);
- /* We clear the entire structure, which also marks it as free for the
- * next user. */
- memset(lg, 0, sizeof(*lg));
+ /* Free the memory allocated to the lguest_struct */
+ kfree(lg);
/* Release lock and exit. */
mutex_unlock(&lguest_lock);
If you choose to build module, its name will be phantom. If unsure,
say N here.
-config EEPROM_93CX6
- tristate "EEPROM 93CX6 support"
- ---help---
- This is a driver for the EEPROM chipsets 93c46 and 93c66.
- The driver supports both read as well as write commands.
-
- If unsure, say N.
-
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
laptops.
source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
endif # MISC_DEVICES
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_PHANTOM) += phantom.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
-obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_C2PORT) += c2port/
+obj-y += eeprom/
--- /dev/null
+menu "EEPROM support"
+
+config EEPROM_AT24
+ tristate "I2C EEPROMs from most vendors"
+ depends on I2C && SYSFS && EXPERIMENTAL
+ help
+ Enable this driver to get read/write support to most I2C EEPROMs,
+ after you configure the driver to know about each EEPROM on
+ your target board. Use these generic chip names, instead of
+ vendor-specific ones like at24c64 or 24lc02:
+
+ 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+ 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+ Unless you like data loss puzzles, always be sure that any chip
+ you configure as a 24c32 (32 kbit) or larger is NOT really a
+ 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+ as read-only won't help recover from this. Also, if your chip
+ has any software write-protect mechanism you may want to review the
+ code to make sure this driver won't turn it on by accident.
+
+ If you use this with an SMBus adapter instead of an I2C adapter,
+ full functionality is not available. Only smaller devices are
+ supported (24c16 and below, max 4 kByte).
+
+ This driver can also be built as a module. If so, the module
+ will be called at24.
+
+config EEPROM_AT25
+ tristate "SPI EEPROMs from most vendors"
+ depends on SPI && SYSFS
+ help
+ Enable this driver to get read/write support to most SPI EEPROMs,
+ after you configure the board init code to know about each eeprom
+ on your target board.
+
+ This driver can also be built as a module. If so, the module
+ will be called at25.
+
+config EEPROM_LEGACY
+ tristate "Old I2C EEPROM reader"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get read-only access to the EEPROM data
+ available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+ EEPROMs could theoretically be available on other devices as well.
+
+ This driver can also be built as a module. If so, the module
+ will be called eeprom.
+
+config EEPROM_93CX6
+ tristate "EEPROM 93CX6 support"
+ help
+ This is a driver for the EEPROM chipsets 93c46 and 93c66.
+ The driver supports both read as well as write commands.
+
+ If unsure, say N.
+
+endmenu
--- /dev/null
+obj-$(CONFIG_EEPROM_AT24) += at24.o
+obj-$(CONFIG_EEPROM_AT25) += at25.o
+obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
+obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
--- /dev/null
+/*
+ * at24.c - handle most I2C EEPROMs
+ *
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/mod_devicetable.h>
+#include <linux/log2.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+/*
+ * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
+ * Differences between different vendor product lines (like Atmel AT24C or
+ * MicroChip 24LC, etc) won't much matter for typical read/write access.
+ * There are also I2C RAM chips, likewise interchangeable. One example
+ * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
+ *
+ * However, misconfiguration can lose data. "Set 16-bit memory address"
+ * to a part with 8-bit addressing will overwrite data. Writing with too
+ * big a page size also loses data. And it's not safe to assume that the
+ * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
+ * uses 0x51, for just one example.
+ *
+ * Accordingly, explicit board-specific configuration data should be used
+ * in almost all cases. (One partial exception is an SMBus used to access
+ * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
+ *
+ * So this driver uses "new style" I2C driver binding, expecting to be
+ * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
+ * similar kernel-resident tables; or, configuration data coming from
+ * a bootloader.
+ *
+ * Other than binding model, current differences from "eeprom" driver are
+ * that this one handles write access and isn't restricted to 24c02 devices.
+ * It also handles larger devices (32 kbit and up) with two-byte addresses,
+ * which won't work on pure SMBus systems.
+ */
+
+struct at24_data {
+ struct at24_platform_data chip;
+ bool use_smbus;
+
+ /*
+ * Lock protects against activities from other Linux tasks,
+ * but not from changes by other I2C masters.
+ */
+ struct mutex lock;
+ struct bin_attribute bin;
+
+ u8 *writebuf;
+ unsigned write_max;
+ unsigned num_addresses;
+
+ /*
+ * Some chips tie up multiple I2C addresses; dummy devices reserve
+ * them for us, and we'll use them with SMBus calls.
+ */
+ struct i2c_client *client[];
+};
+
+/*
+ * This parameter is to help this driver avoid blocking other drivers out
+ * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
+ * clock, one 256 byte read takes about 1/43 second which is excessive;
+ * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
+ * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
+ *
+ * This value is forced to be a power of two so that writes align on pages.
+ */
+static unsigned io_limit = 128;
+module_param(io_limit, uint, 0);
+MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
+
+/*
+ * Specs often allow 5 msec for a page write, sometimes 20 msec;
+ * it's important to recover from write timeouts.
+ */
+static unsigned write_timeout = 25;
+module_param(write_timeout, uint, 0);
+MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
+
+#define AT24_SIZE_BYTELEN 5
+#define AT24_SIZE_FLAGS 8
+
+#define AT24_BITMASK(x) (BIT(x) - 1)
+
+/* create non-zero magic value for given eeprom parameters */
+#define AT24_DEVICE_MAGIC(_len, _flags) \
+ ((1 << AT24_SIZE_FLAGS | (_flags)) \
+ << AT24_SIZE_BYTELEN | ilog2(_len))
+
+static const struct i2c_device_id at24_ids[] = {
+ /* needs 8 addresses as A0-A2 are ignored */
+ { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
+ /* old variants can't be handled with this generic entry! */
+ { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
+ { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
+ /* spd is a 24c02 in memory DIMMs */
+ { "spd", AT24_DEVICE_MAGIC(2048 / 8,
+ AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
+ { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
+ /* 24rf08 quirk is handled at i2c-core */
+ { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
+ { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
+ { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
+ { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
+ { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
+ { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
+ { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
+ { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
+ { "at24", 0 },
+ { /* END OF LIST */ }
+};
+MODULE_DEVICE_TABLE(i2c, at24_ids);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This routine supports chips which consume multiple I2C addresses. It
+ * computes the addressing information to be used for a given r/w request.
+ * Assumes that sanity checks for offset happened at sysfs-layer.
+ */
+static struct i2c_client *at24_translate_offset(struct at24_data *at24,
+ unsigned *offset)
+{
+ unsigned i;
+
+ if (at24->chip.flags & AT24_FLAG_ADDR16) {
+ i = *offset >> 16;
+ *offset &= 0xffff;
+ } else {
+ i = *offset >> 8;
+ *offset &= 0xff;
+ }
+
+ return at24->client[i];
+}
+
+static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
+ unsigned offset, size_t count)
+{
+ struct i2c_msg msg[2];
+ u8 msgbuf[2];
+ struct i2c_client *client;
+ int status, i;
+
+ memset(msg, 0, sizeof(msg));
+
+ /*
+ * REVISIT some multi-address chips don't rollover page reads to
+ * the next slave address, so we may need to truncate the count.
+ * Those chips might need another quirk flag.
+ *
+ * If the real hardware used four adjacent 24c02 chips and that
+ * were misconfigured as one 24c08, that would be a similar effect:
+ * one "eeprom" file not four, but larger reads would fail when
+ * they crossed certain pages.
+ */
+
+ /*
+ * Slave address and byte offset derive from the offset. Always
+ * set the byte address; on a multi-master board, another master
+ * may have changed the chip's "current" address pointer.
+ */
+ client = at24_translate_offset(at24, &offset);
+
+ if (count > io_limit)
+ count = io_limit;
+
+ /* Smaller eeproms can work given some SMBus extension calls */
+ if (at24->use_smbus) {
+ if (count > I2C_SMBUS_BLOCK_MAX)
+ count = I2C_SMBUS_BLOCK_MAX;
+ status = i2c_smbus_read_i2c_block_data(client, offset,
+ count, buf);
+ dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
+ count, offset, status);
+ return (status < 0) ? -EIO : status;
+ }
+
+ /*
+ * When we have a better choice than SMBus calls, use a combined
+ * I2C message. Write address; then read up to io_limit data bytes.
+ * Note that read page rollover helps us here (unlike writes).
+ * msgbuf is u8 and will cast to our needs.
+ */
+ i = 0;
+ if (at24->chip.flags & AT24_FLAG_ADDR16)
+ msgbuf[i++] = offset >> 8;
+ msgbuf[i++] = offset;
+
+ msg[0].addr = client->addr;
+ msg[0].buf = msgbuf;
+ msg[0].len = i;
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].buf = buf;
+ msg[1].len = count;
+
+ status = i2c_transfer(client->adapter, msg, 2);
+ dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
+ count, offset, status);
+
+ if (status == 2)
+ return count;
+ else if (status >= 0)
+ return -EIO;
+ else
+ return status;
+}
+
+static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct at24_data *at24;
+ ssize_t retval = 0;
+
+ at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+ if (unlikely(!count))
+ return count;
+
+ /*
+ * Read data from chip, protecting against concurrent updates
+ * from this host, but not from other I2C masters.
+ */
+ mutex_lock(&at24->lock);
+
+ while (count) {
+ ssize_t status;
+
+ status = at24_eeprom_read(at24, buf, off, count);
+ if (status <= 0) {
+ if (retval == 0)
+ retval = status;
+ break;
+ }
+ buf += status;
+ off += status;
+ count -= status;
+ retval += status;
+ }
+
+ mutex_unlock(&at24->lock);
+
+ return retval;
+}
+
+
+/*
+ * REVISIT: export at24_bin{read,write}() to let other kernel code use
+ * eeprom data. For example, it might hold a board's Ethernet address, or
+ * board-specific calibration data generated on the manufacturing floor.
+ */
+
+
+/*
+ * Note that if the hardware write-protect pin is pulled high, the whole
+ * chip is normally write protected. But there are plenty of product
+ * variants here, including OTP fuses and partial chip protect.
+ *
+ * We only use page mode writes; the alternative is sloooow. This routine
+ * writes at most one page.
+ */
+static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+ unsigned offset, size_t count)
+{
+ struct i2c_client *client;
+ struct i2c_msg msg;
+ ssize_t status;
+ unsigned long timeout, write_time;
+ unsigned next_page;
+
+ /* Get corresponding I2C address and adjust offset */
+ client = at24_translate_offset(at24, &offset);
+
+ /* write_max is at most a page */
+ if (count > at24->write_max)
+ count = at24->write_max;
+
+ /* Never roll over backwards, to the start of this page */
+ next_page = roundup(offset + 1, at24->chip.page_size);
+ if (offset + count > next_page)
+ count = next_page - offset;
+
+ /* If we'll use I2C calls for I/O, set up the message */
+ if (!at24->use_smbus) {
+ int i = 0;
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+
+ /* msg.buf is u8 and casts will mask the values */
+ msg.buf = at24->writebuf;
+ if (at24->chip.flags & AT24_FLAG_ADDR16)
+ msg.buf[i++] = offset >> 8;
+
+ msg.buf[i++] = offset;
+ memcpy(&msg.buf[i], buf, count);
+ msg.len = i + count;
+ }
+
+ /*
+ * Writes fail if the previous one didn't complete yet. We may
+ * loop a few times until this one succeeds, waiting at least
+ * long enough for one entire page write to work.
+ */
+ timeout = jiffies + msecs_to_jiffies(write_timeout);
+ do {
+ write_time = jiffies;
+ if (at24->use_smbus) {
+ status = i2c_smbus_write_i2c_block_data(client,
+ offset, count, buf);
+ if (status == 0)
+ status = count;
+ } else {
+ status = i2c_transfer(client->adapter, &msg, 1);
+ if (status == 1)
+ status = count;
+ }
+ dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
+ count, offset, status, jiffies);
+
+ if (status == count)
+ return count;
+
+ /* REVISIT: at HZ=100, this is sloooow */
+ msleep(1);
+ } while (time_before(write_time, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct at24_data *at24;
+ ssize_t retval = 0;
+
+ at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+ if (unlikely(!count))
+ return count;
+
+ /*
+ * Write data to chip, protecting against concurrent updates
+ * from this host, but not from other I2C masters.
+ */
+ mutex_lock(&at24->lock);
+
+ while (count) {
+ ssize_t status;
+
+ status = at24_eeprom_write(at24, buf, off, count);
+ if (status <= 0) {
+ if (retval == 0)
+ retval = status;
+ break;
+ }
+ buf += status;
+ off += status;
+ count -= status;
+ retval += status;
+ }
+
+ mutex_unlock(&at24->lock);
+
+ return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct at24_platform_data chip;
+ bool writable;
+ bool use_smbus = false;
+ struct at24_data *at24;
+ int err;
+ unsigned i, num_addresses;
+ kernel_ulong_t magic;
+
+ if (client->dev.platform_data) {
+ chip = *(struct at24_platform_data *)client->dev.platform_data;
+ } else {
+ if (!id->driver_data) {
+ err = -ENODEV;
+ goto err_out;
+ }
+ magic = id->driver_data;
+ chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
+ magic >>= AT24_SIZE_BYTELEN;
+ chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
+ /*
+ * This is slow, but we can't know all eeproms, so we better
+ * play safe. Specifying custom eeprom-types via platform_data
+ * is recommended anyhow.
+ */
+ chip.page_size = 1;
+ }
+
+ if (!is_power_of_2(chip.byte_len))
+ dev_warn(&client->dev,
+ "byte_len looks suspicious (no power of 2)!\n");
+ if (!is_power_of_2(chip.page_size))
+ dev_warn(&client->dev,
+ "page_size looks suspicious (no power of 2)!\n");
+
+ /* Use I2C operations unless we're stuck with SMBus extensions. */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ if (chip.flags & AT24_FLAG_ADDR16) {
+ err = -EPFNOSUPPORT;
+ goto err_out;
+ }
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ err = -EPFNOSUPPORT;
+ goto err_out;
+ }
+ use_smbus = true;
+ }
+
+ if (chip.flags & AT24_FLAG_TAKE8ADDR)
+ num_addresses = 8;
+ else
+ num_addresses = DIV_ROUND_UP(chip.byte_len,
+ (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+
+ at24 = kzalloc(sizeof(struct at24_data) +
+ num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
+ if (!at24) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ mutex_init(&at24->lock);
+ at24->use_smbus = use_smbus;
+ at24->chip = chip;
+ at24->num_addresses = num_addresses;
+
+ /*
+ * Export the EEPROM bytes through sysfs, since that's convenient.
+ * By default, only root should see the data (maybe passwords etc)
+ */
+ at24->bin.attr.name = "eeprom";
+ at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
+ at24->bin.read = at24_bin_read;
+ at24->bin.size = chip.byte_len;
+
+ writable = !(chip.flags & AT24_FLAG_READONLY);
+ if (writable) {
+ if (!use_smbus || i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
+
+ unsigned write_max = chip.page_size;
+
+ at24->bin.write = at24_bin_write;
+ at24->bin.attr.mode |= S_IWUSR;
+
+ if (write_max > io_limit)
+ write_max = io_limit;
+ if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
+ write_max = I2C_SMBUS_BLOCK_MAX;
+ at24->write_max = write_max;
+
+ /* buffer (data + address at the beginning) */
+ at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
+ if (!at24->writebuf) {
+ err = -ENOMEM;
+ goto err_struct;
+ }
+ } else {
+ dev_warn(&client->dev,
+ "cannot write due to controller restrictions.");
+ }
+ }
+
+ at24->client[0] = client;
+
+ /* use dummy devices for multiple-address chips */
+ for (i = 1; i < num_addresses; i++) {
+ at24->client[i] = i2c_new_dummy(client->adapter,
+ client->addr + i);
+ if (!at24->client[i]) {
+ dev_err(&client->dev, "address 0x%02x unavailable\n",
+ client->addr + i);
+ err = -EADDRINUSE;
+ goto err_clients;
+ }
+ }
+
+ err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
+ if (err)
+ goto err_clients;
+
+ i2c_set_clientdata(client, at24);
+
+ dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
+ at24->bin.size, client->name,
+ writable ? "(writable)" : "(read-only)");
+ dev_dbg(&client->dev,
+ "page_size %d, num_addresses %d, write_max %d%s\n",
+ chip.page_size, num_addresses,
+ at24->write_max,
+ use_smbus ? ", use_smbus" : "");
+
+ return 0;
+
+err_clients:
+ for (i = 1; i < num_addresses; i++)
+ if (at24->client[i])
+ i2c_unregister_device(at24->client[i]);
+
+ kfree(at24->writebuf);
+err_struct:
+ kfree(at24);
+err_out:
+ dev_dbg(&client->dev, "probe error %d\n", err);
+ return err;
+}
+
+static int __devexit at24_remove(struct i2c_client *client)
+{
+ struct at24_data *at24;
+ int i;
+
+ at24 = i2c_get_clientdata(client);
+ sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
+
+ for (i = 1; i < at24->num_addresses; i++)
+ i2c_unregister_device(at24->client[i]);
+
+ kfree(at24->writebuf);
+ kfree(at24);
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver at24_driver = {
+ .driver = {
+ .name = "at24",
+ .owner = THIS_MODULE,
+ },
+ .probe = at24_probe,
+ .remove = __devexit_p(at24_remove),
+ .id_table = at24_ids,
+};
+
+static int __init at24_init(void)
+{
+ io_limit = rounddown_pow_of_two(io_limit);
+ return i2c_add_driver(&at24_driver);
+}
+module_init(at24_init);
+
+static void __exit at24_exit(void)
+{
+ i2c_del_driver(&at24_driver);
+}
+module_exit(at24_exit);
+
+MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
+MODULE_AUTHOR("David Brownell and Wolfram Sang");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * at25.c -- support most SPI EEPROMs, such as Atmel AT25 models
+ *
+ * Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/sched.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+
+/*
+ * NOTE: this is an *EEPROM* driver. The vagaries of product naming
+ * mean that some AT25 products are EEPROMs, and others are FLASH.
+ * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver,
+ * not this one!
+ */
+
+struct at25_data {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct spi_eeprom chip;
+ struct bin_attribute bin;
+ unsigned addrlen;
+};
+
+#define AT25_WREN 0x06 /* latch the write enable */
+#define AT25_WRDI 0x04 /* reset the write enable */
+#define AT25_RDSR 0x05 /* read status register */
+#define AT25_WRSR 0x01 /* write status register */
+#define AT25_READ 0x03 /* read byte(s) */
+#define AT25_WRITE 0x02 /* write byte(s)/sector */
+
+#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */
+#define AT25_SR_WEN 0x02 /* write enable (latched) */
+#define AT25_SR_BP0 0x04 /* BP for software writeprotect */
+#define AT25_SR_BP1 0x08
+#define AT25_SR_WPEN 0x80 /* writeprotect enable */
+
+
+#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */
+
+/* Specs often allow 5 msec for a page write, sometimes 20 msec;
+ * it's important to recover from write timeouts.
+ */
+#define EE_TIMEOUT 25
+
+/*-------------------------------------------------------------------------*/
+
+#define io_limit PAGE_SIZE /* bytes */
+
+static ssize_t
+at25_ee_read(
+ struct at25_data *at25,
+ char *buf,
+ unsigned offset,
+ size_t count
+)
+{
+ u8 command[EE_MAXADDRLEN + 1];
+ u8 *cp;
+ ssize_t status;
+ struct spi_transfer t[2];
+ struct spi_message m;
+
+ cp = command;
+ *cp++ = AT25_READ;
+
+ /* 8/16/24-bit address is written MSB first */
+ switch (at25->addrlen) {
+ default: /* case 3 */
+ *cp++ = offset >> 16;
+ case 2:
+ *cp++ = offset >> 8;
+ case 1:
+ case 0: /* can't happen: for better codegen */
+ *cp++ = offset >> 0;
+ }
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof t);
+
+ t[0].tx_buf = command;
+ t[0].len = at25->addrlen + 1;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&at25->lock);
+
+ /* Read it all at once.
+ *
+ * REVISIT that's potentially a problem with large chips, if
+ * other devices on the bus need to be accessed regularly or
+ * this chip is clocked very slowly
+ */
+ status = spi_sync(at25->spi, &m);
+ dev_dbg(&at25->spi->dev,
+ "read %Zd bytes at %d --> %d\n",
+ count, offset, (int) status);
+
+ mutex_unlock(&at25->lock);
+ return status ? status : count;
+}
+
+static ssize_t
+at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct at25_data *at25;
+
+ dev = container_of(kobj, struct device, kobj);
+ at25 = dev_get_drvdata(dev);
+
+ if (unlikely(off >= at25->bin.size))
+ return 0;
+ if ((off + count) > at25->bin.size)
+ count = at25->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ return at25_ee_read(at25, buf, off, count);
+}
+
+
+static ssize_t
+at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+{
+ ssize_t status = 0;
+ unsigned written = 0;
+ unsigned buf_size;
+ u8 *bounce;
+
+ /* Temp buffer starts with command and address */
+ buf_size = at25->chip.page_size;
+ if (buf_size > io_limit)
+ buf_size = io_limit;
+ bounce = kmalloc(buf_size + at25->addrlen + 1, GFP_KERNEL);
+ if (!bounce)
+ return -ENOMEM;
+
+ /* For write, rollover is within the page ... so we write at
+ * most one page, then manually roll over to the next page.
+ */
+ bounce[0] = AT25_WRITE;
+ mutex_lock(&at25->lock);
+ do {
+ unsigned long timeout, retries;
+ unsigned segment;
+ unsigned offset = (unsigned) off;
+ u8 *cp = bounce + 1;
+
+ *cp = AT25_WREN;
+ status = spi_write(at25->spi, cp, 1);
+ if (status < 0) {
+ dev_dbg(&at25->spi->dev, "WREN --> %d\n",
+ (int) status);
+ break;
+ }
+
+ /* 8/16/24-bit address is written MSB first */
+ switch (at25->addrlen) {
+ default: /* case 3 */
+ *cp++ = offset >> 16;
+ case 2:
+ *cp++ = offset >> 8;
+ case 1:
+ case 0: /* can't happen: for better codegen */
+ *cp++ = offset >> 0;
+ }
+
+ /* Write as much of a page as we can */
+ segment = buf_size - (offset % buf_size);
+ if (segment > count)
+ segment = count;
+ memcpy(cp, buf, segment);
+ status = spi_write(at25->spi, bounce,
+ segment + at25->addrlen + 1);
+ dev_dbg(&at25->spi->dev,
+ "write %u bytes at %u --> %d\n",
+ segment, offset, (int) status);
+ if (status < 0)
+ break;
+
+ /* REVISIT this should detect (or prevent) failed writes
+ * to readonly sections of the EEPROM...
+ */
+
+ /* Wait for non-busy status */
+ timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
+ retries = 0;
+ do {
+ int sr;
+
+ sr = spi_w8r8(at25->spi, AT25_RDSR);
+ if (sr < 0 || (sr & AT25_SR_nRDY)) {
+ dev_dbg(&at25->spi->dev,
+ "rdsr --> %d (%02x)\n", sr, sr);
+ /* at HZ=100, this is sloooow */
+ msleep(1);
+ continue;
+ }
+ if (!(sr & AT25_SR_nRDY))
+ break;
+ } while (retries++ < 3 || time_before_eq(jiffies, timeout));
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(&at25->spi->dev,
+ "write %d bytes offset %d, "
+ "timeout after %u msecs\n",
+ segment, offset,
+ jiffies_to_msecs(jiffies -
+ (timeout - EE_TIMEOUT)));
+ status = -ETIMEDOUT;
+ break;
+ }
+
+ off += segment;
+ buf += segment;
+ count -= segment;
+ written += segment;
+
+ } while (count > 0);
+
+ mutex_unlock(&at25->lock);
+
+ kfree(bounce);
+ return written ? written : status;
+}
+
+static ssize_t
+at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct at25_data *at25;
+
+ dev = container_of(kobj, struct device, kobj);
+ at25 = dev_get_drvdata(dev);
+
+ if (unlikely(off >= at25->bin.size))
+ return -EFBIG;
+ if ((off + count) > at25->bin.size)
+ count = at25->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ return at25_ee_write(at25, buf, off, count);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at25_probe(struct spi_device *spi)
+{
+ struct at25_data *at25 = NULL;
+ const struct spi_eeprom *chip;
+ int err;
+ int sr;
+ int addrlen;
+
+ /* Chip description */
+ chip = spi->dev.platform_data;
+ if (!chip) {
+ dev_dbg(&spi->dev, "no chip description\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ /* For now we only support 8/16/24 bit addressing */
+ if (chip->flags & EE_ADDR1)
+ addrlen = 1;
+ else if (chip->flags & EE_ADDR2)
+ addrlen = 2;
+ else if (chip->flags & EE_ADDR3)
+ addrlen = 3;
+ else {
+ dev_dbg(&spi->dev, "unsupported address type\n");
+ err = -EINVAL;
+ goto fail;
+ }
+
+ /* Ping the chip ... the status register is pretty portable,
+ * unlike probing manufacturer IDs. We do expect that system
+ * firmware didn't write it in the past few milliseconds!
+ */
+ sr = spi_w8r8(spi, AT25_RDSR);
+ if (sr < 0 || sr & AT25_SR_nRDY) {
+ dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr);
+ err = -ENXIO;
+ goto fail;
+ }
+
+ if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ mutex_init(&at25->lock);
+ at25->chip = *chip;
+ at25->spi = spi_dev_get(spi);
+ dev_set_drvdata(&spi->dev, at25);
+ at25->addrlen = addrlen;
+
+ /* Export the EEPROM bytes through sysfs, since that's convenient.
+ * Default to root-only access to the data; EEPROMs often hold data
+ * that's sensitive for read and/or write, like ethernet addresses,
+ * security codes, board-specific manufacturing calibrations, etc.
+ */
+ at25->bin.attr.name = "eeprom";
+ at25->bin.attr.mode = S_IRUSR;
+ at25->bin.read = at25_bin_read;
+
+ at25->bin.size = at25->chip.byte_len;
+ if (!(chip->flags & EE_READONLY)) {
+ at25->bin.write = at25_bin_write;
+ at25->bin.attr.mode |= S_IWUSR;
+ }
+
+ err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
+ if (err)
+ goto fail;
+
+ dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
+ (at25->bin.size < 1024)
+ ? at25->bin.size
+ : (at25->bin.size / 1024),
+ (at25->bin.size < 1024) ? "Byte" : "KByte",
+ at25->chip.name,
+ (chip->flags & EE_READONLY) ? " (readonly)" : "",
+ at25->chip.page_size);
+ return 0;
+fail:
+ dev_dbg(&spi->dev, "probe err %d\n", err);
+ kfree(at25);
+ return err;
+}
+
+static int __devexit at25_remove(struct spi_device *spi)
+{
+ struct at25_data *at25;
+
+ at25 = dev_get_drvdata(&spi->dev);
+ sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
+ kfree(at25);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct spi_driver at25_driver = {
+ .driver = {
+ .name = "at25",
+ .owner = THIS_MODULE,
+ },
+ .probe = at25_probe,
+ .remove = __devexit_p(at25_remove),
+};
+
+static int __init at25_init(void)
+{
+ return spi_register_driver(&at25_driver);
+}
+module_init(at25_init);
+
+static void __exit at25_exit(void)
+{
+ spi_unregister_driver(&at25_driver);
+}
+module_exit(at25_exit);
+
+MODULE_DESCRIPTION("Driver for most SPI EEPROMs");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+/*
+ Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
+ Philip Edelbrock <phil@netroedge.com>
+ Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+ Copyright (C) 2003 IBM Corp.
+ Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+ 0x55, 0x56, 0x57, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(eeprom);
+
+
+/* Size of EEPROM in bytes */
+#define EEPROM_SIZE 256
+
+/* possible types of eeprom devices */
+enum eeprom_nature {
+ UNKNOWN,
+ VAIO,
+};
+
+/* Each client has this additional data */
+struct eeprom_data {
+ struct mutex update_lock;
+ u8 valid; /* bitfield, bit!=0 if slice is valid */
+ unsigned long last_updated[8]; /* In jiffies, 8 slices */
+ u8 data[EEPROM_SIZE]; /* Register values */
+ enum eeprom_nature nature;
+};
+
+
+static void eeprom_update_client(struct i2c_client *client, u8 slice)
+{
+ struct eeprom_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!(data->valid & (1 << slice)) ||
+ time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
+ dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ for (i = slice << 5; i < (slice + 1) << 5; i += 32)
+ if (i2c_smbus_read_i2c_block_data(client, i,
+ 32, data->data + i)
+ != 32)
+ goto exit;
+ } else {
+ for (i = slice << 5; i < (slice + 1) << 5; i += 2) {
+ int word = i2c_smbus_read_word_data(client, i);
+ if (word < 0)
+ goto exit;
+ data->data[i] = word & 0xff;
+ data->data[i + 1] = word >> 8;
+ }
+ }
+ data->last_updated[slice] = jiffies;
+ data->valid |= (1 << slice);
+ }
+exit:
+ mutex_unlock(&data->update_lock);
+}
+
+static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
+ struct eeprom_data *data = i2c_get_clientdata(client);
+ u8 slice;
+
+ if (off > EEPROM_SIZE)
+ return 0;
+ if (off + count > EEPROM_SIZE)
+ count = EEPROM_SIZE - off;
+
+ /* Only refresh slices which contain requested bytes */
+ for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
+ eeprom_update_client(client, slice);
+
+ /* Hide Vaio private settings to regular users:
+ - BIOS passwords: bytes 0x00 to 0x0f
+ - UUID: bytes 0x10 to 0x1f
+ - Serial number: 0xc0 to 0xdf */
+ if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if ((off + i <= 0x1f) ||
+ (off + i >= 0xc0 && off + i <= 0xdf))
+ buf[i] = 0;
+ else
+ buf[i] = data->data[off + i];
+ }
+ } else {
+ memcpy(buf, &data->data[off], count);
+ }
+
+ return count;
+}
+
+static struct bin_attribute eeprom_attr = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO,
+ },
+ .size = EEPROM_SIZE,
+ .read = eeprom_read,
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int eeprom_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
+ addresses 0x50-0x57, but we only care about 0x50. So decline
+ attaching to addresses >= 0x51 on DDC buses */
+ if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
+ return -ENODEV;
+
+ /* There are four ways we can read the EEPROM data:
+ (1) I2C block reads (faster, but unsupported by most adapters)
+ (2) Word reads (128% overhead)
+ (3) Consecutive byte reads (88% overhead, unsafe)
+ (4) Regular byte data reads (265% overhead)
+ The third and fourth methods are not implemented by this driver
+ because all known adapters support one of the first two. */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
+ && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+ return -ENODEV;
+
+ strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int eeprom_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct eeprom_data *data;
+ int err;
+
+ if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ memset(data->data, 0xff, EEPROM_SIZE);
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+ data->nature = UNKNOWN;
+
+ /* Detect the Vaio nature of EEPROMs.
+ We use the "PCG-" or "VGN-" prefix as the signature. */
+ if (client->addr == 0x57
+ && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
+ char name[4];
+
+ name[0] = i2c_smbus_read_byte_data(client, 0x80);
+ name[1] = i2c_smbus_read_byte_data(client, 0x81);
+ name[2] = i2c_smbus_read_byte_data(client, 0x82);
+ name[3] = i2c_smbus_read_byte_data(client, 0x83);
+
+ if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
+ dev_info(&client->dev, "Vaio EEPROM detected, "
+ "enabling privacy protection\n");
+ data->nature = VAIO;
+ }
+ }
+
+ /* create the sysfs eeprom file */
+ err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
+ if (err)
+ goto exit_kfree;
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int eeprom_remove(struct i2c_client *client)
+{
+ sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id eeprom_id[] = {
+ { "eeprom", 0 },
+ { }
+};
+
+static struct i2c_driver eeprom_driver = {
+ .driver = {
+ .name = "eeprom",
+ },
+ .probe = eeprom_probe,
+ .remove = eeprom_remove,
+ .id_table = eeprom_id,
+
+ .class = I2C_CLASS_DDC | I2C_CLASS_SPD,
+ .detect = eeprom_detect,
+ .address_data = &addr_data,
+};
+
+static int __init eeprom_init(void)
+{
+ return i2c_add_driver(&eeprom_driver);
+}
+
+static void __exit eeprom_exit(void)
+{
+ i2c_del_driver(&eeprom_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+ "Philip Edelbrock <phil@netroedge.com> and "
+ "Greg Kroah-Hartman <greg@kroah.com>");
+MODULE_DESCRIPTION("I2C EEPROM driver");
+MODULE_LICENSE("GPL");
+
+module_init(eeprom_init);
+module_exit(eeprom_exit);
--- /dev/null
+/*
+ Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: eeprom_93cx6
+ Abstract: EEPROM reader routines for 93cx6 chipsets.
+ Supported chipsets: 93c46 & 93c66.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/eeprom_93cx6.h>
+
+MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
+MODULE_VERSION("1.0");
+MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
+MODULE_LICENSE("GPL");
+
+static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+{
+ eeprom->reg_data_clock = 1;
+ eeprom->register_write(eeprom);
+
+ /*
+ * Add a short delay for the pulse to work.
+ * According to the specifications the "maximum minimum"
+ * time should be 450ns.
+ */
+ ndelay(450);
+}
+
+static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+{
+ eeprom->reg_data_clock = 0;
+ eeprom->register_write(eeprom);
+
+ /*
+ * Add a short delay for the pulse to work.
+ * According to the specifications the "maximum minimum"
+ * time should be 450ns.
+ */
+ ndelay(450);
+}
+
+static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
+{
+ /*
+ * Clear all flags, and enable chip select.
+ */
+ eeprom->register_read(eeprom);
+ eeprom->reg_data_in = 0;
+ eeprom->reg_data_out = 0;
+ eeprom->reg_data_clock = 0;
+ eeprom->reg_chip_select = 1;
+ eeprom->register_write(eeprom);
+
+ /*
+ * kick a pulse.
+ */
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
+{
+ /*
+ * Clear chip_select and data_in flags.
+ */
+ eeprom->register_read(eeprom);
+ eeprom->reg_data_in = 0;
+ eeprom->reg_chip_select = 0;
+ eeprom->register_write(eeprom);
+
+ /*
+ * kick a pulse.
+ */
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
+ const u16 data, const u16 count)
+{
+ unsigned int i;
+
+ eeprom->register_read(eeprom);
+
+ /*
+ * Clear data flags.
+ */
+ eeprom->reg_data_in = 0;
+ eeprom->reg_data_out = 0;
+
+ /*
+ * Start writing all bits.
+ */
+ for (i = count; i > 0; i--) {
+ /*
+ * Check if this bit needs to be set.
+ */
+ eeprom->reg_data_in = !!(data & (1 << (i - 1)));
+
+ /*
+ * Write the bit to the eeprom register.
+ */
+ eeprom->register_write(eeprom);
+
+ /*
+ * Kick a pulse.
+ */
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+ }
+
+ eeprom->reg_data_in = 0;
+ eeprom->register_write(eeprom);
+}
+
+static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
+ u16 *data, const u16 count)
+{
+ unsigned int i;
+ u16 buf = 0;
+
+ eeprom->register_read(eeprom);
+
+ /*
+ * Clear data flags.
+ */
+ eeprom->reg_data_in = 0;
+ eeprom->reg_data_out = 0;
+
+ /*
+ * Start reading all bits.
+ */
+ for (i = count; i > 0; i--) {
+ eeprom_93cx6_pulse_high(eeprom);
+
+ eeprom->register_read(eeprom);
+
+ /*
+ * Clear data_in flag.
+ */
+ eeprom->reg_data_in = 0;
+
+ /*
+ * Read if the bit has been set.
+ */
+ if (eeprom->reg_data_out)
+ buf |= (1 << (i - 1));
+
+ eeprom_93cx6_pulse_low(eeprom);
+ }
+
+ *data = buf;
+}
+
+/**
+ * eeprom_93cx6_read - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ *
+ * This function will read the eeprom data as host-endian word
+ * into the given data pointer.
+ */
+void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
+ u16 *data)
+{
+ u16 command;
+
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the read opcode and the word to be read.
+ */
+ command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
+ eeprom_93cx6_write_bits(eeprom, command,
+ PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+ /*
+ * Read the requested 16 bits.
+ */
+ eeprom_93cx6_read_bits(eeprom, data, 16);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
+
+/**
+ * eeprom_93cx6_multiread - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ * @words: Number of words that should be read.
+ *
+ * This function will read all requested words from the eeprom,
+ * this is done by calling eeprom_93cx6_read() multiple times.
+ * But with the additional change that while the eeprom_93cx6_read
+ * will return host ordered bytes, this method will return little
+ * endian words.
+ */
+void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
+ __le16 *data, const u16 words)
+{
+ unsigned int i;
+ u16 tmp;
+
+ for (i = 0; i < words; i++) {
+ tmp = 0;
+ eeprom_93cx6_read(eeprom, word + i, &tmp);
+ data[i] = cpu_to_le16(tmp);
+ }
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
+
+++ /dev/null
-/*
- Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: eeprom_93cx6
- Abstract: EEPROM reader routines for 93cx6 chipsets.
- Supported chipsets: 93c46 & 93c66.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/eeprom_93cx6.h>
-
-MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
-MODULE_VERSION("1.0");
-MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
-MODULE_LICENSE("GPL");
-
-static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
-{
- eeprom->reg_data_clock = 1;
- eeprom->register_write(eeprom);
-
- /*
- * Add a short delay for the pulse to work.
- * According to the specifications the "maximum minimum"
- * time should be 450ns.
- */
- ndelay(450);
-}
-
-static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
-{
- eeprom->reg_data_clock = 0;
- eeprom->register_write(eeprom);
-
- /*
- * Add a short delay for the pulse to work.
- * According to the specifications the "maximum minimum"
- * time should be 450ns.
- */
- ndelay(450);
-}
-
-static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
-{
- /*
- * Clear all flags, and enable chip select.
- */
- eeprom->register_read(eeprom);
- eeprom->reg_data_in = 0;
- eeprom->reg_data_out = 0;
- eeprom->reg_data_clock = 0;
- eeprom->reg_chip_select = 1;
- eeprom->register_write(eeprom);
-
- /*
- * kick a pulse.
- */
- eeprom_93cx6_pulse_high(eeprom);
- eeprom_93cx6_pulse_low(eeprom);
-}
-
-static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
-{
- /*
- * Clear chip_select and data_in flags.
- */
- eeprom->register_read(eeprom);
- eeprom->reg_data_in = 0;
- eeprom->reg_chip_select = 0;
- eeprom->register_write(eeprom);
-
- /*
- * kick a pulse.
- */
- eeprom_93cx6_pulse_high(eeprom);
- eeprom_93cx6_pulse_low(eeprom);
-}
-
-static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
- const u16 data, const u16 count)
-{
- unsigned int i;
-
- eeprom->register_read(eeprom);
-
- /*
- * Clear data flags.
- */
- eeprom->reg_data_in = 0;
- eeprom->reg_data_out = 0;
-
- /*
- * Start writing all bits.
- */
- for (i = count; i > 0; i--) {
- /*
- * Check if this bit needs to be set.
- */
- eeprom->reg_data_in = !!(data & (1 << (i - 1)));
-
- /*
- * Write the bit to the eeprom register.
- */
- eeprom->register_write(eeprom);
-
- /*
- * Kick a pulse.
- */
- eeprom_93cx6_pulse_high(eeprom);
- eeprom_93cx6_pulse_low(eeprom);
- }
-
- eeprom->reg_data_in = 0;
- eeprom->register_write(eeprom);
-}
-
-static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
- u16 *data, const u16 count)
-{
- unsigned int i;
- u16 buf = 0;
-
- eeprom->register_read(eeprom);
-
- /*
- * Clear data flags.
- */
- eeprom->reg_data_in = 0;
- eeprom->reg_data_out = 0;
-
- /*
- * Start reading all bits.
- */
- for (i = count; i > 0; i--) {
- eeprom_93cx6_pulse_high(eeprom);
-
- eeprom->register_read(eeprom);
-
- /*
- * Clear data_in flag.
- */
- eeprom->reg_data_in = 0;
-
- /*
- * Read if the bit has been set.
- */
- if (eeprom->reg_data_out)
- buf |= (1 << (i - 1));
-
- eeprom_93cx6_pulse_low(eeprom);
- }
-
- *data = buf;
-}
-
-/**
- * eeprom_93cx6_read - Read multiple words from eeprom
- * @eeprom: Pointer to eeprom structure
- * @word: Word index from where we should start reading
- * @data: target pointer where the information will have to be stored
- *
- * This function will read the eeprom data as host-endian word
- * into the given data pointer.
- */
-void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
- u16 *data)
-{
- u16 command;
-
- /*
- * Initialize the eeprom register
- */
- eeprom_93cx6_startup(eeprom);
-
- /*
- * Select the read opcode and the word to be read.
- */
- command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
- eeprom_93cx6_write_bits(eeprom, command,
- PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
-
- /*
- * Read the requested 16 bits.
- */
- eeprom_93cx6_read_bits(eeprom, data, 16);
-
- /*
- * Cleanup eeprom register.
- */
- eeprom_93cx6_cleanup(eeprom);
-}
-EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
-
-/**
- * eeprom_93cx6_multiread - Read multiple words from eeprom
- * @eeprom: Pointer to eeprom structure
- * @word: Word index from where we should start reading
- * @data: target pointer where the information will have to be stored
- * @words: Number of words that should be read.
- *
- * This function will read all requested words from the eeprom,
- * this is done by calling eeprom_93cx6_read() multiple times.
- * But with the additional change that while the eeprom_93cx6_read
- * will return host ordered bytes, this method will return little
- * endian words.
- */
-void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
- __le16 *data, const u16 words)
-{
- unsigned int i;
- u16 tmp;
-
- for (i = 0; i < words; i++) {
- tmp = 0;
- eeprom_93cx6_read(eeprom, word + i, &tmp);
- data[i] = cpu_to_le16(tmp);
- }
-}
-EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
-
class_destroy(ilo_class);
}
-MODULE_VERSION("0.05");
+MODULE_VERSION("0.06");
MODULE_ALIAS(ILO_NAME);
MODULE_DESCRIPTION(ILO_NAME);
MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
return;
-
- DBUG_ON(ch->local_msgqueue == NULL);
- DBUG_ON(ch->remote_msgqueue == NULL);
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
int n_IRQs_expected;
int n_IRQs_detected;
- DBUG_ON(xpc_activate_IRQ_rcvd == 0);
-
spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
n_IRQs_expected = xpc_activate_IRQ_rcvd;
xpc_activate_IRQ_rcvd = 0;
msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
(get % ch->local_nentries) *
ch->entry_size);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
msg->flags = 0;
} while (++get < ch_sn2->remote_GP.get);
}
struct xpc_msg_sn2 *msg;
s64 put;
- put = ch_sn2->w_remote_GP.put;
+ /* flags are zeroed when the buffer is allocated */
+ if (ch_sn2->remote_GP.put < ch->remote_nentries)
+ return;
+
+ put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries);
do {
msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
(put % ch->remote_nentries) *
ch->entry_size);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+ DBUG_ON(!(msg->flags & XPC_M_SN2_DONE));
+ DBUG_ON(msg->number != put - ch->remote_nentries);
msg->flags = 0;
} while (++put < ch_sn2->remote_GP.put);
}
*/
xpc_clear_remote_msgqueue_flags_sn2(ch);
+ smp_wmb(); /* ensure flags have been cleared before bte_copy */
ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
break;
get = ch_sn2->w_local_GP.get;
- rmb(); /* guarantee that .get loads before .put */
+ smp_rmb(); /* guarantee that .get loads before .put */
if (get == ch_sn2->w_remote_GP.put)
break;
msg = xpc_pull_remote_msg_sn2(ch, get);
- DBUG_ON(msg != NULL && msg->number != get);
- DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
- DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+ if (msg != NULL) {
+ DBUG_ON(msg->number != get);
+ DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
- payload = &msg->payload;
+ payload = &msg->payload;
+ }
break;
}
while (1) {
put = ch_sn2->w_local_GP.put;
- rmb(); /* guarantee that .put loads before .get */
+ smp_rmb(); /* guarantee that .put loads before .get */
if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
/* There are available message entries. We need to try
* The preceding store of msg->flags must occur before the following
* load of local_GP->put.
*/
- mb();
+ smp_mb();
/* see if the message is next in line to be sent, if so send it */
dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
(void *)msg, msg_number, ch->partid, ch->number);
- DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+ DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) !=
msg_number % ch->remote_nentries);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
DBUG_ON(msg->flags & XPC_M_SN2_DONE);
msg->flags |= XPC_M_SN2_DONE;
* The preceding store of msg->flags must occur before the following
* load of local_GP->get.
*/
- mb();
+ smp_mb();
/*
* See if this message is next in line to be acknowledged as having
atomic_inc(&ch->n_to_notify);
msg_slot->key = key;
- wmb(); /* a non-NULL func must hit memory after the key */
+ smp_wmb(); /* a non-NULL func must hit memory after the key */
msg_slot->func = func;
if (ch->flags & XPC_C_DISCONNECTING) {
If unsure, say N.
+config MMC_OMAP_HS
+ tristate "TI OMAP High Speed Multimedia Card Interface support"
+ depends on ARCH_OMAP2430 || ARCH_OMAP3
+ help
+ This selects the TI OMAP High Speed Multimedia card Interface.
+ If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
+ say Y or M here.
+
+ If unsure, say N.
+
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
depends on ISA_DMA_API
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
+obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
--- /dev/null
+/*
+ * drivers/mmc/host/omap_hsmmc.c
+ *
+ * Driver for OMAP2430/3430 MMC controller.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ *
+ * Authors:
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ * Madhusudhan <madhu.cr@ti.com>
+ * Mohit Jalori <mjalori@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/cpu.h>
+
+/* OMAP HSMMC Host Controller Registers */
+#define OMAP_HSMMC_SYSCONFIG 0x0010
+#define OMAP_HSMMC_CON 0x002C
+#define OMAP_HSMMC_BLK 0x0104
+#define OMAP_HSMMC_ARG 0x0108
+#define OMAP_HSMMC_CMD 0x010C
+#define OMAP_HSMMC_RSP10 0x0110
+#define OMAP_HSMMC_RSP32 0x0114
+#define OMAP_HSMMC_RSP54 0x0118
+#define OMAP_HSMMC_RSP76 0x011C
+#define OMAP_HSMMC_DATA 0x0120
+#define OMAP_HSMMC_HCTL 0x0128
+#define OMAP_HSMMC_SYSCTL 0x012C
+#define OMAP_HSMMC_STAT 0x0130
+#define OMAP_HSMMC_IE 0x0134
+#define OMAP_HSMMC_ISE 0x0138
+#define OMAP_HSMMC_CAPA 0x0140
+
+#define VS18 (1 << 26)
+#define VS30 (1 << 25)
+#define SDVS18 (0x5 << 9)
+#define SDVS30 (0x6 << 9)
+#define SDVSCLR 0xFFFFF1FF
+#define SDVSDET 0x00000400
+#define AUTOIDLE 0x1
+#define SDBP (1 << 8)
+#define DTO 0xe
+#define ICE 0x1
+#define ICS 0x2
+#define CEN (1 << 2)
+#define CLKD_MASK 0x0000FFC0
+#define CLKD_SHIFT 6
+#define DTO_MASK 0x000F0000
+#define DTO_SHIFT 16
+#define INT_EN_MASK 0x307F0033
+#define INIT_STREAM (1 << 1)
+#define DP_SELECT (1 << 21)
+#define DDIR (1 << 4)
+#define DMA_EN 0x1
+#define MSBS (1 << 5)
+#define BCE (1 << 1)
+#define FOUR_BIT (1 << 1)
+#define CC 0x1
+#define TC 0x02
+#define OD 0x1
+#define ERR (1 << 15)
+#define CMD_TIMEOUT (1 << 16)
+#define DATA_TIMEOUT (1 << 20)
+#define CMD_CRC (1 << 17)
+#define DATA_CRC (1 << 21)
+#define CARD_ERR (1 << 28)
+#define STAT_CLEAR 0xFFFFFFFF
+#define INIT_STREAM_CMD 0x00000000
+#define DUAL_VOLT_OCR_BIT 7
+#define SRC (1 << 25)
+#define SRD (1 << 26)
+
+/*
+ * FIXME: Most likely all the data using these _DEVID defines should come
+ * from the platform_data, or implemented in controller and slot specific
+ * functions.
+ */
+#define OMAP_MMC1_DEVID 0
+#define OMAP_MMC2_DEVID 1
+
+#define OMAP_MMC_DATADIR_NONE 0
+#define OMAP_MMC_DATADIR_READ 1
+#define OMAP_MMC_DATADIR_WRITE 2
+#define MMC_TIMEOUT_MS 20
+#define OMAP_MMC_MASTER_CLOCK 96000000
+#define DRIVER_NAME "mmci-omap-hs"
+
+/*
+ * One controller can have multiple slots, like on some omap boards using
+ * omap.c controller driver. Luckily this is not currently done on any known
+ * omap_hsmmc.c device.
+ */
+#define mmc_slot(host) (host->pdata->slots[host->slot_id])
+
+/*
+ * MMC Host controller read/write API's
+ */
+#define OMAP_HSMMC_READ(base, reg) \
+ __raw_readl((base) + OMAP_HSMMC_##reg)
+
+#define OMAP_HSMMC_WRITE(base, reg, val) \
+ __raw_writel((val), (base) + OMAP_HSMMC_##reg)
+
+struct mmc_omap_host {
+ struct device *dev;
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct clk *fclk;
+ struct clk *iclk;
+ struct clk *dbclk;
+ struct semaphore sem;
+ struct work_struct mmc_carddetect_work;
+ void __iomem *base;
+ resource_size_t mapbase;
+ unsigned int id;
+ unsigned int dma_len;
+ unsigned int dma_dir;
+ unsigned char bus_mode;
+ unsigned char datadir;
+ u32 *buffer;
+ u32 bytesleft;
+ int suspended;
+ int irq;
+ int carddetect;
+ int use_dma, dma_ch;
+ int initstr;
+ int slot_id;
+ int dbclk_enabled;
+ struct omap_mmc_platform_data *pdata;
+};
+
+/*
+ * Stop clock to the card
+ */
+static void omap_mmc_stop_clock(struct mmc_omap_host *host)
+{
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
+ if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
+ dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
+}
+
+/*
+ * Send init stream sequence to card
+ * before sending IDLE command
+ */
+static void send_init_stream(struct mmc_omap_host *host)
+{
+ int reg = 0;
+ unsigned long timeout;
+
+ disable_irq(host->irq);
+ OMAP_HSMMC_WRITE(host->base, CON,
+ OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
+ OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
+
+ timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+ while ((reg != CC) && time_before(jiffies, timeout))
+ reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+
+ OMAP_HSMMC_WRITE(host->base, CON,
+ OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
+ enable_irq(host->irq);
+}
+
+static inline
+int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
+{
+ int r = 1;
+
+ if (host->pdata->slots[host->slot_id].get_cover_state)
+ r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
+ host->slot_id);
+ return r;
+}
+
+static ssize_t
+mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+ struct mmc_omap_host *host = mmc_priv(mmc);
+
+ return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
+ "open");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
+
+static ssize_t
+mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+ struct mmc_omap_host *host = mmc_priv(mmc);
+ struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
+
+ return sprintf(buf, "slot:%s\n", slot.name);
+}
+
+static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
+
+/*
+ * Configure the response type and send the cmd.
+ */
+static void
+mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
+ struct mmc_data *data)
+{
+ int cmdreg = 0, resptype = 0, cmdtype = 0;
+
+ dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
+ mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
+ host->cmd = cmd;
+
+ /*
+ * Clear status bits and enable interrupts
+ */
+ OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+ OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+ OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ resptype = 1;
+ else
+ resptype = 2;
+ }
+
+ /*
+ * Unlike OMAP1 controller, the cmdtype does not seem to be based on
+ * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
+ * a val of 0x3, rest 0x0.
+ */
+ if (cmd == host->mrq->stop)
+ cmdtype = 0x3;
+
+ cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+
+ if (data) {
+ cmdreg |= DP_SELECT | MSBS | BCE;
+ if (data->flags & MMC_DATA_READ)
+ cmdreg |= DDIR;
+ else
+ cmdreg &= ~(DDIR);
+ }
+
+ if (host->use_dma)
+ cmdreg |= DMA_EN;
+
+ OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
+ OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
+}
+
+/*
+ * Notify the transfer complete to MMC core
+ */
+static void
+mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+ host->data = NULL;
+
+ if (host->use_dma && host->dma_ch != -1)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+ host->dma_dir);
+
+ host->datadir = OMAP_MMC_DATADIR_NONE;
+
+ if (!data->error)
+ data->bytes_xfered += data->blocks * (data->blksz);
+ else
+ data->bytes_xfered = 0;
+
+ if (!data->stop) {
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, data->mrq);
+ return;
+ }
+ mmc_omap_start_command(host, data->stop, NULL);
+}
+
+/*
+ * Notify the core about command completion
+ */
+static void
+mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ /* response type 2 */
+ cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
+ cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
+ cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
+ cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
+ } else {
+ /* response types 1, 1b, 3, 4, 5, 6 */
+ cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
+ }
+ }
+ if (host->data == NULL || cmd->error) {
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, cmd->mrq);
+ }
+}
+
+/*
+ * DMA clean up for command errors
+ */
+static void mmc_dma_cleanup(struct mmc_omap_host *host)
+{
+ host->data->error = -ETIMEDOUT;
+
+ if (host->use_dma && host->dma_ch != -1) {
+ dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+ host->dma_dir);
+ omap_free_dma(host->dma_ch);
+ host->dma_ch = -1;
+ up(&host->sem);
+ }
+ host->data = NULL;
+ host->datadir = OMAP_MMC_DATADIR_NONE;
+}
+
+/*
+ * Readable error output
+ */
+#ifdef CONFIG_MMC_DEBUG
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
+{
+ /* --- means reserved bit without definition at documentation */
+ static const char *mmc_omap_status_bits[] = {
+ "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
+ "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
+ "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
+ "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
+ };
+ char res[256];
+ char *buf = res;
+ int len, i;
+
+ len = sprintf(buf, "MMC IRQ 0x%x :", status);
+ buf += len;
+
+ for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
+ if (status & (1 << i)) {
+ len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
+ buf += len;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "%s\n", res);
+}
+#endif /* CONFIG_MMC_DEBUG */
+
+
+/*
+ * MMC controller IRQ handler
+ */
+static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
+{
+ struct mmc_omap_host *host = dev_id;
+ struct mmc_data *data;
+ int end_cmd = 0, end_trans = 0, status;
+
+ if (host->cmd == NULL && host->data == NULL) {
+ OMAP_HSMMC_WRITE(host->base, STAT,
+ OMAP_HSMMC_READ(host->base, STAT));
+ return IRQ_HANDLED;
+ }
+
+ data = host->data;
+ status = OMAP_HSMMC_READ(host->base, STAT);
+ dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
+
+ if (status & ERR) {
+#ifdef CONFIG_MMC_DEBUG
+ mmc_omap_report_irq(host, status);
+#endif
+ if ((status & CMD_TIMEOUT) ||
+ (status & CMD_CRC)) {
+ if (host->cmd) {
+ if (status & CMD_TIMEOUT) {
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base,
+ SYSCTL) | SRC);
+ while (OMAP_HSMMC_READ(host->base,
+ SYSCTL) & SRC)
+ ;
+
+ host->cmd->error = -ETIMEDOUT;
+ } else {
+ host->cmd->error = -EILSEQ;
+ }
+ end_cmd = 1;
+ }
+ if (host->data)
+ mmc_dma_cleanup(host);
+ }
+ if ((status & DATA_TIMEOUT) ||
+ (status & DATA_CRC)) {
+ if (host->data) {
+ if (status & DATA_TIMEOUT)
+ mmc_dma_cleanup(host);
+ else
+ host->data->error = -EILSEQ;
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base,
+ SYSCTL) | SRD);
+ while (OMAP_HSMMC_READ(host->base,
+ SYSCTL) & SRD)
+ ;
+ end_trans = 1;
+ }
+ }
+ if (status & CARD_ERR) {
+ dev_dbg(mmc_dev(host->mmc),
+ "Ignoring card err CMD%d\n", host->cmd->opcode);
+ if (host->cmd)
+ end_cmd = 1;
+ if (host->data)
+ end_trans = 1;
+ }
+ }
+
+ OMAP_HSMMC_WRITE(host->base, STAT, status);
+
+ if (end_cmd || (status & CC))
+ mmc_omap_cmd_done(host, host->cmd);
+ if (end_trans || (status & TC))
+ mmc_omap_xfer_done(host, data);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Switch MMC operating voltage
+ */
+static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
+{
+ u32 reg_val = 0;
+ int ret;
+
+ /* Disable the clocks */
+ clk_disable(host->fclk);
+ clk_disable(host->iclk);
+ clk_disable(host->dbclk);
+
+ /* Turn the power off */
+ ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ if (ret != 0)
+ goto err;
+
+ /* Turn the power ON with given VDD 1.8 or 3.0v */
+ ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+ if (ret != 0)
+ goto err;
+
+ clk_enable(host->fclk);
+ clk_enable(host->iclk);
+ clk_enable(host->dbclk);
+
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
+ reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+ /*
+ * If a MMC dual voltage card is detected, the set_ios fn calls
+ * this fn with VDD bit set for 1.8V. Upon card removal from the
+ * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
+ *
+ * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is
+ * set in HCTL.
+ */
+ if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
+ ((1 << vdd) == MMC_VDD_33_34)))
+ reg_val |= SDVS30;
+ if ((1 << vdd) == MMC_VDD_165_195)
+ reg_val |= SDVS18;
+
+ OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
+
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+ return 0;
+err:
+ dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+ return ret;
+}
+
+/*
+ * Work Item to notify the core about card insertion/removal
+ */
+static void mmc_omap_detect(struct work_struct *work)
+{
+ struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+ mmc_carddetect_work);
+
+ sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+ if (host->carddetect) {
+ mmc_detect_change(host->mmc, (HZ * 200) / 1000);
+ } else {
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
+ while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
+ ;
+
+ mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+ }
+}
+
+/*
+ * ISR for handling card insertion and removal
+ */
+static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
+
+ host->carddetect = mmc_slot(host).card_detect(irq);
+ schedule_work(&host->mmc_carddetect_work);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * DMA call back function
+ */
+static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+ struct mmc_omap_host *host = data;
+
+ if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
+ dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
+
+ if (host->dma_ch < 0)
+ return;
+
+ omap_free_dma(host->dma_ch);
+ host->dma_ch = -1;
+ /*
+ * DMA Callback: run in interrupt context.
+ * mutex_unlock will through a kernel warning if used.
+ */
+ up(&host->sem);
+}
+
+/*
+ * Configure dma src and destination parameters
+ */
+static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
+ struct mmc_data *data)
+{
+ if (sync_dir == 0) {
+ omap_set_dma_dest_params(host->dma_ch, 0,
+ OMAP_DMA_AMODE_CONSTANT,
+ (host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+ omap_set_dma_src_params(host->dma_ch, 0,
+ OMAP_DMA_AMODE_POST_INC,
+ sg_dma_address(&data->sg[0]), 0, 0);
+ } else {
+ omap_set_dma_src_params(host->dma_ch, 0,
+ OMAP_DMA_AMODE_CONSTANT,
+ (host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+ omap_set_dma_dest_params(host->dma_ch, 0,
+ OMAP_DMA_AMODE_POST_INC,
+ sg_dma_address(&data->sg[0]), 0, 0);
+ }
+ return 0;
+}
+/*
+ * Routine to configure and start DMA for the MMC card
+ */
+static int
+mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
+{
+ int sync_dev, sync_dir = 0;
+ int dma_ch = 0, ret = 0, err = 1;
+ struct mmc_data *data = req->data;
+
+ /*
+ * If for some reason the DMA transfer is still active,
+ * we wait for timeout period and free the dma
+ */
+ if (host->dma_ch != -1) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(100);
+ if (down_trylock(&host->sem)) {
+ omap_free_dma(host->dma_ch);
+ host->dma_ch = -1;
+ up(&host->sem);
+ return err;
+ }
+ } else {
+ if (down_trylock(&host->sem))
+ return err;
+ }
+
+ if (!(data->flags & MMC_DATA_WRITE)) {
+ host->dma_dir = DMA_FROM_DEVICE;
+ if (host->id == OMAP_MMC1_DEVID)
+ sync_dev = OMAP24XX_DMA_MMC1_RX;
+ else
+ sync_dev = OMAP24XX_DMA_MMC2_RX;
+ } else {
+ host->dma_dir = DMA_TO_DEVICE;
+ if (host->id == OMAP_MMC1_DEVID)
+ sync_dev = OMAP24XX_DMA_MMC1_TX;
+ else
+ sync_dev = OMAP24XX_DMA_MMC2_TX;
+ }
+
+ ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
+ host, &dma_ch);
+ if (ret != 0) {
+ dev_dbg(mmc_dev(host->mmc),
+ "%s: omap_request_dma() failed with %d\n",
+ mmc_hostname(host->mmc), ret);
+ return ret;
+ }
+
+ host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, host->dma_dir);
+ host->dma_ch = dma_ch;
+
+ if (!(data->flags & MMC_DATA_WRITE))
+ mmc_omap_config_dma_param(1, host, data);
+ else
+ mmc_omap_config_dma_param(0, host, data);
+
+ if ((data->blksz % 4) == 0)
+ omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
+ (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
+ sync_dev, sync_dir);
+ else
+ /* REVISIT: The MMC buffer increments only when MSB is written.
+ * Return error for blksz which is non multiple of four.
+ */
+ return -EINVAL;
+
+ omap_start_dma(dma_ch);
+ return 0;
+}
+
+static void set_data_timeout(struct mmc_omap_host *host,
+ struct mmc_request *req)
+{
+ unsigned int timeout, cycle_ns;
+ uint32_t reg, clkd, dto = 0;
+
+ reg = OMAP_HSMMC_READ(host->base, SYSCTL);
+ clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
+ if (clkd == 0)
+ clkd = 1;
+
+ cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+ timeout = req->data->timeout_ns / cycle_ns;
+ timeout += req->data->timeout_clks;
+ if (timeout) {
+ while ((timeout & 0x80000000) == 0) {
+ dto += 1;
+ timeout <<= 1;
+ }
+ dto = 31 - dto;
+ timeout <<= 1;
+ if (timeout && dto)
+ dto += 1;
+ if (dto >= 13)
+ dto -= 13;
+ else
+ dto = 0;
+ if (dto > 14)
+ dto = 14;
+ }
+
+ reg &= ~DTO_MASK;
+ reg |= dto << DTO_SHIFT;
+ OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
+}
+
+/*
+ * Configure block length for MMC/SD cards and initiate the transfer.
+ */
+static int
+mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
+{
+ int ret;
+ host->data = req->data;
+
+ if (req->data == NULL) {
+ host->datadir = OMAP_MMC_DATADIR_NONE;
+ OMAP_HSMMC_WRITE(host->base, BLK, 0);
+ return 0;
+ }
+
+ OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+ | (req->data->blocks << 16));
+ set_data_timeout(host, req);
+
+ host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
+ OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
+
+ if (host->use_dma) {
+ ret = mmc_omap_start_dma_transfer(host, req);
+ if (ret != 0) {
+ dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+ return ret;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Request function. for read/write operation
+ */
+static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+
+ WARN_ON(host->mrq != NULL);
+ host->mrq = req;
+ mmc_omap_prepare_data(host, req);
+ mmc_omap_start_command(host, req->cmd, req->data);
+}
+
+
+/* Routine to configure clock values. Exposed API to core */
+static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+ u16 dsor = 0;
+ unsigned long regval;
+ unsigned long timeout;
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ /*
+ * Reset bus voltage to 3V if it got set to 1.8V earlier.
+ * REVISIT: If we are able to detect cards after unplugging
+ * a 1.8V card, this code should not be needed.
+ */
+ if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+ int vdd = fls(host->mmc->ocr_avail) - 1;
+ if (omap_mmc_switch_opcond(host, vdd) != 0)
+ host->mmc->ios.vdd = vdd;
+ }
+ break;
+ case MMC_POWER_UP:
+ mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
+ break;
+ }
+
+ switch (mmc->ios.bus_width) {
+ case MMC_BUS_WIDTH_4:
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
+ break;
+ case MMC_BUS_WIDTH_1:
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
+ break;
+ }
+
+ if (host->id == OMAP_MMC1_DEVID) {
+ /* Only MMC1 can operate at 3V/1.8V */
+ if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
+ (ios->vdd == DUAL_VOLT_OCR_BIT)) {
+ /*
+ * The mmc_select_voltage fn of the core does
+ * not seem to set the power_mode to
+ * MMC_POWER_UP upon recalculating the voltage.
+ * vdd 1.8v.
+ */
+ if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
+ dev_dbg(mmc_dev(host->mmc),
+ "Switch operation failed\n");
+ }
+ }
+
+ if (ios->clock) {
+ dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
+ if (dsor < 1)
+ dsor = 1;
+
+ if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
+ dsor++;
+
+ if (dsor > 250)
+ dsor = 250;
+ }
+ omap_mmc_stop_clock(host);
+ regval = OMAP_HSMMC_READ(host->base, SYSCTL);
+ regval = regval & ~(CLKD_MASK);
+ regval = regval | (dsor << 6) | (DTO << 16);
+ OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
+
+ /* Wait till the ICS bit is set */
+ timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+ while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
+ && time_before(jiffies, timeout))
+ msleep(1);
+
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
+
+ if (ios->power_mode == MMC_POWER_ON)
+ send_init_stream(host);
+
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ OMAP_HSMMC_WRITE(host->base, CON,
+ OMAP_HSMMC_READ(host->base, CON) | OD);
+}
+
+static int omap_hsmmc_get_cd(struct mmc_host *mmc)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+ struct omap_mmc_platform_data *pdata = host->pdata;
+
+ if (!pdata->slots[0].card_detect)
+ return -ENOSYS;
+ return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
+}
+
+static int omap_hsmmc_get_ro(struct mmc_host *mmc)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+ struct omap_mmc_platform_data *pdata = host->pdata;
+
+ if (!pdata->slots[0].get_ro)
+ return -ENOSYS;
+ return pdata->slots[0].get_ro(host->dev, 0);
+}
+
+static struct mmc_host_ops mmc_omap_ops = {
+ .request = omap_mmc_request,
+ .set_ios = omap_mmc_set_ios,
+ .get_cd = omap_hsmmc_get_cd,
+ .get_ro = omap_hsmmc_get_ro,
+ /* NYET -- enable_sdio_irq */
+};
+
+static int __init omap_mmc_probe(struct platform_device *pdev)
+{
+ struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+ struct mmc_host *mmc;
+ struct mmc_omap_host *host = NULL;
+ struct resource *res;
+ int ret = 0, irq;
+ u32 hctl, capa;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "Platform Data is missing\n");
+ return -ENXIO;
+ }
+
+ if (pdata->nr_slots == 0) {
+ dev_err(&pdev->dev, "No Slots\n");
+ return -ENXIO;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (res == NULL || irq < 0)
+ return -ENXIO;
+
+ res = request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name);
+ if (res == NULL)
+ return -EBUSY;
+
+ mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->pdata = pdata;
+ host->dev = &pdev->dev;
+ host->use_dma = 1;
+ host->dev->dma_mask = &pdata->dma_mask;
+ host->dma_ch = -1;
+ host->irq = irq;
+ host->id = pdev->id;
+ host->slot_id = 0;
+ host->mapbase = res->start;
+ host->base = ioremap(host->mapbase, SZ_4K);
+
+ platform_set_drvdata(pdev, host);
+ INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
+
+ mmc->ops = &mmc_omap_ops;
+ mmc->f_min = 400000;
+ mmc->f_max = 52000000;
+
+ sema_init(&host->sem, 1);
+
+ host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+ if (IS_ERR(host->iclk)) {
+ ret = PTR_ERR(host->iclk);
+ host->iclk = NULL;
+ goto err1;
+ }
+ host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+ if (IS_ERR(host->fclk)) {
+ ret = PTR_ERR(host->fclk);
+ host->fclk = NULL;
+ clk_put(host->iclk);
+ goto err1;
+ }
+
+ if (clk_enable(host->fclk) != 0) {
+ clk_put(host->iclk);
+ clk_put(host->fclk);
+ goto err1;
+ }
+
+ if (clk_enable(host->iclk) != 0) {
+ clk_disable(host->fclk);
+ clk_put(host->iclk);
+ clk_put(host->fclk);
+ goto err1;
+ }
+
+ host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+ /*
+ * MMC can still work without debounce clock.
+ */
+ if (IS_ERR(host->dbclk))
+ dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
+ else
+ if (clk_enable(host->dbclk) != 0)
+ dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
+ " clk failed\n");
+ else
+ host->dbclk_enabled = 1;
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+ mmc->max_phys_segs = 1;
+ mmc->max_hw_segs = 1;
+#endif
+ mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
+ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ mmc->ocr_avail = mmc_slot(host).ocr_mask;
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+ if (pdata->slots[host->slot_id].wires >= 4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ /* Only MMC1 supports 3.0V */
+ if (host->id == OMAP_MMC1_DEVID) {
+ hctl = SDVS30;
+ capa = VS30 | VS18;
+ } else {
+ hctl = SDVS18;
+ capa = VS18;
+ }
+
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) | hctl);
+
+ OMAP_HSMMC_WRITE(host->base, CAPA,
+ OMAP_HSMMC_READ(host->base, CAPA) | capa);
+
+ /* Set the controller to AUTO IDLE mode */
+ OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
+ OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+
+ /* Set SD bus power bit */
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+ /* Request IRQ for MMC operations */
+ ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
+ mmc_hostname(mmc), host);
+ if (ret) {
+ dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+ goto err_irq;
+ }
+
+ if (pdata->init != NULL) {
+ if (pdata->init(&pdev->dev) != 0) {
+ dev_dbg(mmc_dev(host->mmc),
+ "Unable to configure MMC IRQs\n");
+ goto err_irq_cd_init;
+ }
+ }
+
+ /* Request IRQ for card detect */
+ if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
+ ret = request_irq(mmc_slot(host).card_detect_irq,
+ omap_mmc_cd_handler,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+ | IRQF_DISABLED,
+ mmc_hostname(mmc), host);
+ if (ret) {
+ dev_dbg(mmc_dev(host->mmc),
+ "Unable to grab MMC CD IRQ\n");
+ goto err_irq_cd;
+ }
+ }
+
+ OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+ OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+ mmc_add_host(mmc);
+
+ if (host->pdata->slots[host->slot_id].name != NULL) {
+ ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
+ if (ret < 0)
+ goto err_slot_name;
+ }
+ if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
+ host->pdata->slots[host->slot_id].get_cover_state) {
+ ret = device_create_file(&mmc->class_dev,
+ &dev_attr_cover_switch);
+ if (ret < 0)
+ goto err_cover_switch;
+ }
+
+ return 0;
+
+err_cover_switch:
+ device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
+err_slot_name:
+ mmc_remove_host(mmc);
+err_irq_cd:
+ free_irq(mmc_slot(host).card_detect_irq, host);
+err_irq_cd_init:
+ free_irq(host->irq, host);
+err_irq:
+ clk_disable(host->fclk);
+ clk_disable(host->iclk);
+ clk_put(host->fclk);
+ clk_put(host->iclk);
+ if (host->dbclk_enabled) {
+ clk_disable(host->dbclk);
+ clk_put(host->dbclk);
+ }
+
+err1:
+ iounmap(host->base);
+err:
+ dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
+ release_mem_region(res->start, res->end - res->start + 1);
+ if (host)
+ mmc_free_host(mmc);
+ return ret;
+}
+
+static int omap_mmc_remove(struct platform_device *pdev)
+{
+ struct mmc_omap_host *host = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ if (host) {
+ mmc_remove_host(host->mmc);
+ if (host->pdata->cleanup)
+ host->pdata->cleanup(&pdev->dev);
+ free_irq(host->irq, host);
+ if (mmc_slot(host).card_detect_irq)
+ free_irq(mmc_slot(host).card_detect_irq, host);
+ flush_scheduled_work();
+
+ clk_disable(host->fclk);
+ clk_disable(host->iclk);
+ clk_put(host->fclk);
+ clk_put(host->iclk);
+ if (host->dbclk_enabled) {
+ clk_disable(host->dbclk);
+ clk_put(host->dbclk);
+ }
+
+ mmc_free_host(host->mmc);
+ iounmap(host->base);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, res->end - res->start + 1);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int ret = 0;
+ struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+ if (host && host->suspended)
+ return 0;
+
+ if (host) {
+ ret = mmc_suspend_host(host->mmc, state);
+ if (ret == 0) {
+ host->suspended = 1;
+
+ OMAP_HSMMC_WRITE(host->base, ISE, 0);
+ OMAP_HSMMC_WRITE(host->base, IE, 0);
+
+ if (host->pdata->suspend) {
+ ret = host->pdata->suspend(&pdev->dev,
+ host->slot_id);
+ if (ret)
+ dev_dbg(mmc_dev(host->mmc),
+ "Unable to handle MMC board"
+ " level suspend\n");
+ }
+
+ if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL)
+ & SDVSCLR);
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL)
+ | SDVS30);
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL)
+ | SDBP);
+ }
+
+ clk_disable(host->fclk);
+ clk_disable(host->iclk);
+ clk_disable(host->dbclk);
+ }
+
+ }
+ return ret;
+}
+
+/* Routine to resume the MMC device */
+static int omap_mmc_resume(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+ if (host && !host->suspended)
+ return 0;
+
+ if (host) {
+
+ ret = clk_enable(host->fclk);
+ if (ret)
+ goto clk_en_err;
+
+ ret = clk_enable(host->iclk);
+ if (ret) {
+ clk_disable(host->fclk);
+ clk_put(host->fclk);
+ goto clk_en_err;
+ }
+
+ if (clk_enable(host->dbclk) != 0)
+ dev_dbg(mmc_dev(host->mmc),
+ "Enabling debounce clk failed\n");
+
+ if (host->pdata->resume) {
+ ret = host->pdata->resume(&pdev->dev, host->slot_id);
+ if (ret)
+ dev_dbg(mmc_dev(host->mmc),
+ "Unmask interrupt failed\n");
+ }
+
+ /* Notify the core to resume the host */
+ ret = mmc_resume_host(host->mmc);
+ if (ret == 0)
+ host->suspended = 0;
+ }
+
+ return ret;
+
+clk_en_err:
+ dev_dbg(mmc_dev(host->mmc),
+ "Failed to enable MMC clocks during resume\n");
+ return ret;
+}
+
+#else
+#define omap_mmc_suspend NULL
+#define omap_mmc_resume NULL
+#endif
+
+static struct platform_driver omap_mmc_driver = {
+ .probe = omap_mmc_probe,
+ .remove = omap_mmc_remove,
+ .suspend = omap_mmc_suspend,
+ .resume = omap_mmc_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init omap_mmc_init(void)
+{
+ /* Register the MMC driver */
+ return platform_driver_register(&omap_mmc_driver);
+}
+
+static void __exit omap_mmc_cleanup(void)
+{
+ /* Unregister MMC driver */
+ platform_driver_unregister(&omap_mmc_driver);
+}
+
+module_init(omap_mmc_init);
+module_exit(omap_mmc_cleanup);
+
+MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
#include <mach/regs-sdi.h>
#include <mach/regs-gpio.h>
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
chip->numchips);
- dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n",
+ dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
chip->chipsize);
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
chip->pagemask);
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
chip->ecc.layout);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
- dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size);
+ dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
mtd->erasesize);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
#endif
add_mtd_device(&priv->mtd);
- printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n",
- res.start, priv->bank);
+ printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
+ (unsigned long long)res.start, priv->bank);
return 0;
err:
if (pasemi_nand_mtd)
return -ENODEV;
- pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end);
+ pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end);
/* Allocate memory for MTD device structure and private data */
pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
goto out_lpc;
}
- printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n",
+ printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
res.start, lpcctl);
return 0;
}
if (c->gpio_irq) {
- if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+ if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
config FEC
bool "FEC ethernet controller (of ColdFire CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x
+ depends on M523x || M527x || M5272 || M528x || M520x || M532x
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire processors.
/*
* Stop the chip.
*/
- spin_lock_irqsave(priv->chip_lock, flags);
+ spin_lock_irqsave(&priv->chip_lock, flags);
write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
- spin_unlock_irqrestore(priv->chip_lock, flags);
+ spin_unlock_irqrestore(&priv->chip_lock, flags);
write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
netif_stop_queue(dev);
netif_carrier_off(dev);
- spin_lock_irqsave(priv->chip_lock, flags);
+ spin_lock_irqsave(&priv->chip_lock, flags);
write_rreg (dev->base_addr, CSR0, CSR0_STOP);
write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irqrestore(priv->chip_lock, flags);
+ spin_unlock_irqrestore(&priv->chip_lock, flags);
free_irq (dev->irq, dev);
am79c961_mc_hash(dmi, multi_hash);
}
- spin_lock_irqsave(priv->chip_lock, flags);
+ spin_lock_irqsave(&priv->chip_lock, flags);
stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
* Spin waiting for chip to report suspend mode
*/
while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
- spin_unlock_irqrestore(priv->chip_lock, flags);
+ spin_unlock_irqrestore(&priv->chip_lock, flags);
nop();
- spin_lock_irqsave(priv->chip_lock, flags);
+ spin_lock_irqsave(&priv->chip_lock, flags);
}
}
write_rreg(dev->base_addr, CTRL1, 0);
}
- spin_unlock_irqrestore(priv->chip_lock, flags);
+ spin_unlock_irqrestore(&priv->chip_lock, flags);
}
static void am79c961_timeout(struct net_device *dev)
am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
priv->txhead = head;
- spin_lock_irqsave(priv->chip_lock, flags);
+ spin_lock_irqsave(&priv->chip_lock, flags);
write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
dev->trans_start = jiffies;
- spin_unlock_irqrestore(priv->chip_lock, flags);
+ spin_unlock_irqrestore(&priv->chip_lock, flags);
/*
* If the next packet is owned by the ethernet device,
/* bnx2x.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define bnx2x_fp(bp, nr, var) (bp->fp[nr].var)
-#define BNX2X_HAS_TX_WORK(fp) \
- ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
- (fp->tx_pkt_prod != fp->tx_pkt_cons))
-
-#define BNX2X_HAS_RX_WORK(fp) \
- (fp->rx_comp_cons != rx_cons_sb)
-
-#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))
/* MC hsi */
-/* Copyright 2008 Broadcom Corporation
+/* Copyright 2008-2009 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
val &= ~0x810;
EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
+ /* enable emac */
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
+
/* enable emac for jumbo packets */
EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
(EMAC_RX_MTU_SIZE_JUMBO_ENA |
u32 gp_status)
{
struct bnx2x *bp = params->bp;
-
+ u16 new_line_speed;
u8 rc = 0;
vars->link_status = 0;
switch (gp_status & GP_STATUS_SPEED_MASK) {
case GP_STATUS_10M:
- vars->line_speed = SPEED_10;
+ new_line_speed = SPEED_10;
if (vars->duplex == DUPLEX_FULL)
vars->link_status |= LINK_10TFD;
else
break;
case GP_STATUS_100M:
- vars->line_speed = SPEED_100;
+ new_line_speed = SPEED_100;
if (vars->duplex == DUPLEX_FULL)
vars->link_status |= LINK_100TXFD;
else
case GP_STATUS_1G:
case GP_STATUS_1G_KX:
- vars->line_speed = SPEED_1000;
+ new_line_speed = SPEED_1000;
if (vars->duplex == DUPLEX_FULL)
vars->link_status |= LINK_1000TFD;
else
break;
case GP_STATUS_2_5G:
- vars->line_speed = SPEED_2500;
+ new_line_speed = SPEED_2500;
if (vars->duplex == DUPLEX_FULL)
vars->link_status |= LINK_2500TFD;
else
case GP_STATUS_10G_KX4:
case GP_STATUS_10G_HIG:
case GP_STATUS_10G_CX4:
- vars->line_speed = SPEED_10000;
+ new_line_speed = SPEED_10000;
vars->link_status |= LINK_10GTFD;
break;
case GP_STATUS_12G_HIG:
- vars->line_speed = SPEED_12000;
+ new_line_speed = SPEED_12000;
vars->link_status |= LINK_12GTFD;
break;
case GP_STATUS_12_5G:
- vars->line_speed = SPEED_12500;
+ new_line_speed = SPEED_12500;
vars->link_status |= LINK_12_5GTFD;
break;
case GP_STATUS_13G:
- vars->line_speed = SPEED_13000;
+ new_line_speed = SPEED_13000;
vars->link_status |= LINK_13GTFD;
break;
case GP_STATUS_15G:
- vars->line_speed = SPEED_15000;
+ new_line_speed = SPEED_15000;
vars->link_status |= LINK_15GTFD;
break;
case GP_STATUS_16G:
- vars->line_speed = SPEED_16000;
+ new_line_speed = SPEED_16000;
vars->link_status |= LINK_16GTFD;
break;
break;
}
+ /* Upon link speed change set the NIG into drain mode.
+ Comes to deals with possible FIFO glitch due to clk change
+ when speed is decreased without link down indicator */
+ if (new_line_speed != vars->line_speed) {
+ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+ + params->port*4, 0);
+ msleep(1);
+ }
+ vars->line_speed = new_line_speed;
vars->link_status |= LINK_STATUS_SERDES_LINK;
if ((params->req_line_speed == SPEED_AUTO_NEG) &&
(MDIO_REG_BANK_CL73_IEEEB0 +
(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
0x6041);
-
+ msleep(200);
/* set aer mmd back */
bnx2x_set_aer_mmd(params, vars);
}
if (vars->phy_flags & PHY_XGXS_FLAG) {
- if (params->req_line_speed &&
+ if ((params->req_line_speed &&
((params->req_line_speed == SPEED_100) ||
- (params->req_line_speed == SPEED_10))) {
+ (params->req_line_speed == SPEED_10))) ||
+ (!params->req_line_speed &&
+ (params->speed_cap_mask >=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
+ (params->speed_cap_mask <
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+ )) {
vars->phy_flags |= PHY_SGMII_FLAG;
} else {
vars->phy_flags &= ~PHY_SGMII_FLAG;
/* activate nig drain */
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+ /* disable emac */
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+ msleep(10);
+
/* reset BigMac */
bnx2x_bmac_rx_disable(bp, params->port);
REG_WR(bp, GRCBASE_MISC +
/* update shared memory */
bnx2x_update_mng(params, vars->link_status);
+ msleep(20);
return rc;
}
/* This function should called upon link interrupt */
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
+ /* disable emac */
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* Check external link change only for non-direct */
ext_phy_addr[port],
MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
- if (fw_ver1 == 0) {
+ if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
DP(NETIF_MSG_LINK,
- "bnx2x_8073_common_init_phy port %x "
- "fw Download failed\n", port);
+ "bnx2x_8073_common_init_phy port %x:"
+ "Download failed. fw version = 0x%x\n",
+ port, fw_ver1);
return -EINVAL;
}
/* bnx2x_main.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.45.23"
-#define DRV_MODULE_RELDATE "2008/11/03"
+#define DRV_MODULE_VERSION "1.45.26"
+#define DRV_MODULE_RELDATE "2009/01/26"
#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung */
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("Eliezer Tamir");
-MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
* fast path service functions
*/
+static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+ u16 tx_cons_sb;
+
+ /* Tell compiler that status block fields can change */
+ barrier();
+ tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
+ return (fp->tx_pkt_cons != tx_cons_sb);
+}
+
+static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
+{
+ /* Tell compiler that consumer and producer can change */
+ barrier();
+ return (fp->tx_pkt_prod != fp->tx_pkt_cons);
+
+}
+
/* free skb in the packet ring at pos idx
* return idx of last bd freed
*/
}
+static void bnx2x_reset_common(struct bnx2x *bp)
+{
+ /* reset_common */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+ 0xd3ffff7f);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
+}
+
static int bnx2x_init_common(struct bnx2x *bp)
{
u32 val, i;
DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_FUNC(bp));
+ bnx2x_reset_common(bp);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
{
bnx2x_int_disable_sync(bp, disable_hw);
+ bnx2x_napi_disable(bp);
if (netif_running(bp->dev)) {
- bnx2x_napi_disable(bp);
netif_tx_disable(bp->dev);
bp->dev->trans_start = jiffies; /* prevent tx timeout */
}
* multicast 64-127:port0 128-191:port1
*/
config->hdr.length_6b = 2;
- config->hdr.offset = port ? 31 : 0;
+ config->hdr.offset = port ? 32 : 0;
config->hdr.client_id = BP_CL_ID(bp);
config->hdr.reserved1 = 0;
static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
{
u32 load_code;
- int i, rc;
+ int i, rc = 0;
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
return -EPERM;
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
- /* Send LOAD_REQUEST command to MCP
- Returns the type of LOAD command:
- if it is the first port to be initialized
- common blocks should be initialized, otherwise - not
- */
- if (!BP_NOMCP(bp)) {
- load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
- if (!load_code) {
- BNX2X_ERR("MCP response failure, aborting\n");
- return -EBUSY;
- }
- if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
- return -EBUSY; /* other port in diagnostic mode */
-
- } else {
- int port = BP_PORT(bp);
-
- DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
- load_count[0], load_count[1], load_count[2]);
- load_count[0]++;
- load_count[1 + port]++;
- DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n",
- load_count[0], load_count[1], load_count[2]);
- if (load_count[0] == 1)
- load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
- else if (load_count[1 + port] == 1)
- load_code = FW_MSG_CODE_DRV_LOAD_PORT;
- else
- load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
- }
-
- if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
- (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
- bp->port.pmf = 1;
- else
- bp->port.pmf = 0;
- DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
-
- /* if we can't use MSI-X we only need one fp,
- * so try to enable MSI-X with the requested number of fp's
- * and fallback to inta with one fp
- */
if (use_inta) {
bp->num_queues = 1;
else
bp->num_queues = 1;
- if (bnx2x_enable_msix(bp)) {
+ DP(NETIF_MSG_IFUP,
+ "set number of queues to %d\n", bp->num_queues);
+
+ /* if we can't use MSI-X we only need one fp,
+ * so try to enable MSI-X with the requested number of fp's
+ * and fallback to MSI or legacy INTx with one fp
+ */
+ rc = bnx2x_enable_msix(bp);
+ if (rc) {
/* failed to enable MSI-X */
bp->num_queues = 1;
if (use_multi)
" to enable MSI-X\n");
}
}
- DP(NETIF_MSG_IFUP,
- "set number of queues to %d\n", bp->num_queues);
if (bnx2x_alloc_mem(bp))
return -ENOMEM;
bnx2x_fp(bp, i, disable_tpa) =
((bp->flags & TPA_ENABLE_FLAG) == 0);
+ for_each_queue(bp, i)
+ netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+ bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+ for_each_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+
+ fp->poll_no_work = 0;
+ fp->poll_calls = 0;
+ fp->poll_max_calls = 0;
+ fp->poll_complete = 0;
+ fp->poll_exit = 0;
+ }
+#endif
+ bnx2x_napi_enable(bp);
+
if (bp->flags & USING_MSIX_FLAG) {
rc = bnx2x_req_msix_irqs(bp);
if (rc) {
pci_disable_msix(bp->pdev);
- goto load_error;
+ goto load_error1;
}
+ printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
} else {
bnx2x_ack_int(bp);
rc = bnx2x_req_irq(bp);
if (rc) {
- BNX2X_ERR("IRQ request failed, aborting\n");
- goto load_error;
+ BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc);
+ goto load_error1;
}
}
- for_each_queue(bp, i)
- netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
- bnx2x_poll, 128);
+ /* Send LOAD_REQUEST command to MCP
+ Returns the type of LOAD command:
+ if it is the first port to be initialized
+ common blocks should be initialized, otherwise - not
+ */
+ if (!BP_NOMCP(bp)) {
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+ if (!load_code) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ rc = -EBUSY;
+ goto load_error2;
+ }
+ if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+ rc = -EBUSY; /* other port in diagnostic mode */
+ goto load_error2;
+ }
+
+ } else {
+ int port = BP_PORT(bp);
+
+ DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
+ load_count[0], load_count[1], load_count[2]);
+ load_count[0]++;
+ load_count[1 + port]++;
+ DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n",
+ load_count[0], load_count[1], load_count[2]);
+ if (load_count[0] == 1)
+ load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
+ else if (load_count[1 + port] == 1)
+ load_code = FW_MSG_CODE_DRV_LOAD_PORT;
+ else
+ load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
+ }
+
+ if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
+ bp->port.pmf = 1;
+ else
+ bp->port.pmf = 0;
+ DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
/* Initialize HW */
rc = bnx2x_init_hw(bp, load_code);
if (rc) {
BNX2X_ERR("HW init failed, aborting\n");
- goto load_int_disable;
+ goto load_error2;
}
/* Setup NIC internals and enable interrupts */
if (!load_code) {
BNX2X_ERR("MCP response failure, aborting\n");
rc = -EBUSY;
- goto load_rings_free;
+ goto load_error3;
}
}
rc = bnx2x_setup_leading(bp);
if (rc) {
BNX2X_ERR("Setup leading failed!\n");
- goto load_netif_stop;
+ goto load_error3;
}
if (CHIP_IS_E1H(bp))
for_each_nondefault_queue(bp, i) {
rc = bnx2x_setup_multi(bp, i);
if (rc)
- goto load_netif_stop;
+ goto load_error3;
}
if (CHIP_IS_E1(bp))
case LOAD_NORMAL:
/* Tx queue should be only reenabled */
netif_wake_queue(bp->dev);
+ /* Initialize the receive filter. */
bnx2x_set_rx_mode(bp->dev);
break;
case LOAD_OPEN:
netif_start_queue(bp->dev);
+ /* Initialize the receive filter. */
bnx2x_set_rx_mode(bp->dev);
- if (bp->flags & USING_MSIX_FLAG)
- printk(KERN_INFO PFX "%s: using MSI-X\n",
- bp->dev->name);
break;
case LOAD_DIAG:
+ /* Initialize the receive filter. */
bnx2x_set_rx_mode(bp->dev);
bp->state = BNX2X_STATE_DIAG;
break;
return 0;
-load_netif_stop:
- bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+ bnx2x_int_disable_sync(bp, 1);
+ if (!BP_NOMCP(bp)) {
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ }
+ bp->port.pmf = 0;
/* Free SKBs, SGEs, TPA pool and driver internals */
bnx2x_free_skbs(bp);
for_each_queue(bp, i)
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
- bnx2x_int_disable_sync(bp, 1);
+load_error2:
/* Release IRQs */
bnx2x_free_irq(bp);
-load_error:
+load_error1:
+ bnx2x_napi_disable(bp);
+ for_each_queue(bp, i)
+ netif_napi_del(&bnx2x_fp(bp, i, napi));
bnx2x_free_mem(bp);
- bp->port.pmf = 0;
/* TBD we really need to reset the chip
if we want to recover from this */
}
cnt--;
msleep(1);
+ rmb(); /* Refresh the dsb_sp_prod */
}
bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
/* TODO: Close Doorbell port? */
}
-static void bnx2x_reset_common(struct bnx2x *bp)
-{
- /* reset_common */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
- 0xd3ffff7f);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
-}
-
static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
{
DP(BNX2X_MSG_MCP, "function %d reset_code %x\n",
bnx2x_set_storm_rx_mode(bp);
bnx2x_netif_stop(bp, 1);
- if (!netif_running(bp->dev))
- bnx2x_napi_disable(bp);
+
del_timer_sync(&bp->timer);
SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
(DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+ /* Release IRQs */
+ bnx2x_free_irq(bp);
+
/* Wait until tx fast path tasks complete */
for_each_queue(bp, i) {
struct bnx2x_fastpath *fp = &bp->fp[i];
cnt = 1000;
smp_rmb();
- while (BNX2X_HAS_TX_WORK(fp)) {
+ while (bnx2x_has_tx_work_unload(fp)) {
bnx2x_tx_int(fp, 1000);
if (!cnt) {
/* Give HW time to discard old tx messages */
msleep(1);
- /* Release IRQs */
- bnx2x_free_irq(bp);
-
if (CHIP_IS_E1(bp)) {
struct mac_configuration_cmd *config =
bnx2x_sp(bp, mcast_config);
bnx2x_free_skbs(bp);
for_each_queue(bp, i)
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+ for_each_queue(bp, i)
+ netif_napi_del(&bnx2x_fp(bp, i, napi));
bnx2x_free_mem(bp);
bp->state = BNX2X_STATE_CLOSED;
*/
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
- if (val == 0x7)
- REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
if (val == 0x7) {
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
/* save our func */
u32 swap_en;
u32 swap_val;
+ /* clear the UNDI indication */
+ REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+
BNX2X_DEV_INFO("UNDI is active! reset device\n");
/* try unload UNDI on port 0 */
bnx2x_fw_command(bp, reset_code);
}
+ /* now it's safe to release the lock */
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
HC_REG_CONFIG_0), 0x1000);
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
- }
+
+ } else
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
}
}
id |= ((val & 0xf) << 12);
val = REG_RD(bp, MISC_REG_CHIP_METAL);
id |= ((val & 0xff) << 4);
- REG_RD(bp, MISC_REG_BOND_ID);
+ val = REG_RD(bp, MISC_REG_BOND_ID);
id |= (val & 0xf);
bp->common.chip_id = id;
bp->link_params.chip_id = bp->common.chip_id;
struct bnx2x *bp = netdev_priv(dev);
int rc;
+ if (!netif_running(dev))
+ return -EAGAIN;
+
DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n",
eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
if (loopback_mode == BNX2X_MAC_LOOPBACK) {
bp->link_params.loopback_mode = LOOPBACK_BMAC;
- bnx2x_acquire_phy_lock(bp);
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
- bnx2x_release_phy_lock(bp);
} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
+ u16 cnt = 1000;
bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
- bnx2x_acquire_phy_lock(bp);
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
- bnx2x_release_phy_lock(bp);
/* wait until link state is restored */
- bnx2x_wait_for_link(bp, link_up);
-
+ if (link_up)
+ while (cnt-- && bnx2x_test_link(&bp->link_params,
+ &bp->link_vars))
+ msleep(10);
} else
return -EINVAL;
return BNX2X_LOOPBACK_FAILED;
bnx2x_netif_stop(bp, 1);
+ bnx2x_acquire_phy_lock(bp);
if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
rc |= BNX2X_PHY_LOOPBACK_FAILED;
}
+ bnx2x_release_phy_lock(bp);
bnx2x_netif_start(bp);
return rc;
return -ENODEV;
config->hdr.length_6b = 0;
- config->hdr.offset = 0;
+ if (CHIP_IS_E1(bp))
+ config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
+ else
+ config->hdr.offset = BP_FUNC(bp);
config->hdr.client_id = BP_CL_ID(bp);
config->hdr.reserved1 = 0;
return 0;
}
+static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
+{
+ u16 rx_cons_sb;
+
+ /* Tell compiler that status block fields can change */
+ barrier();
+ rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+ if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+ rx_cons_sb++;
+ return (fp->rx_comp_cons != rx_cons_sb);
+}
+
/*
* net_device service functions
*/
napi);
struct bnx2x *bp = fp->bp;
int work_done = 0;
- u16 rx_cons_sb;
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
bnx2x_update_fpsb_idx(fp);
- if (BNX2X_HAS_TX_WORK(fp))
+ if (bnx2x_has_tx_work(fp))
bnx2x_tx_int(fp, budget);
- rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
- if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
- rx_cons_sb++;
- if (BNX2X_HAS_RX_WORK(fp))
+ if (bnx2x_has_rx_work(fp))
work_done = bnx2x_rx_int(fp, budget);
-
rmb(); /* BNX2X_HAS_WORK() reads the status block */
- rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
- if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
- rx_cons_sb++;
/* must not complete if we consumed full budget */
if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
return rc;
}
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
/* check if packet requires linearization (packet is too fragmented) */
static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
u32 xmit_type)
return to_copy;
}
+#endif
/* called with netif_tx_lock
* bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
/* First, check if we need to linearize the skb
(due to FW restrictions) */
if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
return NETDEV_TX_OK;
}
}
+#endif
/*
Please read carefully. First we use one BD which we mark as start,
{
struct bnx2x *bp = netdev_priv(dev);
+ netif_carrier_off(dev);
+
bnx2x_set_power_state(bp, PCI_D0);
return bnx2x_nic_load(bp, LOAD_OPEN);
for (; i < old; i++) {
if (CAM_IS_INVALID(config->
config_table[i])) {
- i--; /* already invalidated */
+ /* already invalidated */
break;
}
/* invalidate */
return rc;
}
- rc = register_netdev(dev);
- if (rc) {
- dev_err(&pdev->dev, "Cannot register net device\n");
- goto init_one_exit;
- }
-
pci_set_drvdata(pdev, dev);
rc = bnx2x_init_bp(bp);
+ if (rc)
+ goto init_one_exit;
+
+ rc = register_netdev(dev);
if (rc) {
- unregister_netdev(dev);
+ dev_err(&pdev->dev, "Cannot register net device\n");
goto init_one_exit;
}
- netif_carrier_off(dev);
-
bp->common.name = board_info[ent->driver_data].name;
printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
" IRQ %d, ", dev->name, bp->common.name,
bnx2x_free_skbs(bp);
for_each_queue(bp, i)
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+ for_each_queue(bp, i)
+ netif_napi_del(&bnx2x_fp(bp, i, napi));
bnx2x_free_mem(bp);
bp->state = BNX2X_STATE_CLOSED;
/* bnx2x_reg.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
{
lro_mgr->dev = qs->netdev;
lro_mgr->features = LRO_F_NAPI;
+ lro_mgr->frag_align_pad = NET_IP_ALIGN;
lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
lro_mgr->max_desc = T3_MAX_LRO_SES;
ew32(PBA_ECC, reg);
}
- /* PCI-Ex Control Register */
+ /* PCI-Ex Control Registers */
if (hw->mac.type == e1000_82574) {
reg = er32(GCR);
reg |= (1 << 22);
ew32(GCR, reg);
+
+ reg = er32(GCR2);
+ reg |= 1;
+ ew32(GCR2, reg);
}
return;
E1000_MANC2H = 0x05860, /* Management Control To Host - RW */
E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
E1000_GCR = 0x05B00, /* PCI-Ex Control */
+ E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */
E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
/*
* Set MII speed to 2.5 MHz
*/
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+ fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2;
fecp->fec_mii_speed = fep->phy_speed;
fec_restart(dev, 0);
{
struct gfar_private *priv = netdev_priv(dev);
unsigned long flags;
- struct vlan_group *old_grp;
u32 tempval;
spin_lock_irqsave(&priv->rxlock, flags);
- old_grp = priv->vlgrp;
-
- if (old_grp == grp)
- return;
+ priv->vlgrp = grp;
if (grp) {
/* Enable VLAN tag insertion */
rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+ rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
+ rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
rx_ring->cpu = cpu;
}
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
}
+static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /* add VID to filter table */
+ hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
+}
+
+static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_disable(adapter);
+
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable(adapter);
+
+ /* remove VID from filter table */
+ hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
+}
+
static void ixgbe_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp)
{
ctrl |= IXGBE_VLNCTRL_VME;
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+ ixgbe_vlan_rx_add_vid(netdev, 0);
if (grp) {
/* enable VLAN tag insert/strip */
ixgbe_irq_enable(adapter);
}
-static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- /* add VID to filter table */
- hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
-}
-
-static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_disable(adapter);
-
- vlan_group_set_device(adapter->vlgrp, vid, NULL);
-
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable(adapter);
-
- /* remove VID from filter table */
- hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
-}
-
static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
{
ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
ixgbe_irq_enable(adapter);
+ /* enable transmits */
+ netif_tx_start_all_queues(netdev);
+
/* bring the link up in the watchdog, this could race with our first
* link up interrupt but shouldn't be a problem */
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
(FLOW_TX ? "TX" : "None"))));
netif_carrier_on(netdev);
- netif_tx_wake_all_queues(netdev);
} else {
/* Force detection of hung controller */
adapter->detect_tx_hung = true;
printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
netdev->name);
netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
}
}
}
netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
if (devcs & ETH_RX_MP)
dev->stats.multicast++;
+ /* 16 bit align */
+ skb_reserve(skb_new, 2);
+
lp->rx_skb[lp->rx_next_done] = skb_new;
}
static void korina_alloc_ring(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
+ struct sk_buff *skb;
int i;
/* Initialize the transmit descriptors */
/* Initialize the receive descriptors */
for (i = 0; i < KORINA_NUM_RDS; i++) {
- struct sk_buff *skb = lp->rx_skb[i];
-
skb = dev_alloc_skb(KORINA_RBSIZE + 2);
if (!skb)
break;
lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
}
- /* loop back */
- lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
- lp->rx_next_done = 0;
+ /* loop back receive descriptors, so the last
+ * descriptor points to the first one */
+ lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
+ lp->rd_ring[i - 1].control |= DMA_DESC_COD;
- lp->rd_ring[i].control |= DMA_DESC_COD;
+ lp->rx_next_done = 0;
lp->rx_chain_head = 0;
lp->rx_chain_tail = 0;
lp->rx_chain_status = desc_empty;
printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
bp->dev->name);
+ /* Transfer ongoing, disable transmitter, to avoid confusion */
+ if (status & MACB_BIT(TGO))
+ macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
+
head = bp->tx_head;
/*Mark all the buffer as used to avoid sending a lost buffer*/
}
bp->tx_head = bp->tx_tail = 0;
+
+ /* Enable the transmitter again */
+ if (status & MACB_BIT(TGO))
+ macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
}
if (!(status & MACB_BIT(COMP)))
profile[MLX4_RES_AUXC].num = request->num_qp;
profile[MLX4_RES_SRQ].num = request->num_srq;
profile[MLX4_RES_CQ].num = request->num_cq;
- profile[MLX4_RES_EQ].num = min(dev_cap->max_eqs,
- dev_cap->reserved_eqs +
- num_possible_cpus() + 1);
+ profile[MLX4_RES_EQ].num = min_t(unsigned, dev_cap->max_eqs,
+ dev_cap->reserved_eqs +
+ num_possible_cpus() + 1);
profile[MLX4_RES_DMPT].num = request->num_mpt;
profile[MLX4_RES_CMPT].num = MLX4_NUM_CMPTS;
profile[MLX4_RES_MTT].num = request->num_mtt;
/*
* SDMA configuration register.
*/
+#define RX_BURST_SIZE_4_64BIT (2 << 1)
#define RX_BURST_SIZE_16_64BIT (4 << 1)
#define BLM_RX_NO_SWAP (1 << 4)
#define BLM_TX_NO_SWAP (1 << 5)
+#define TX_BURST_SIZE_4_64BIT (2 << 22)
#define TX_BURST_SIZE_16_64BIT (4 << 22)
#if defined(__BIG_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
- (RX_BURST_SIZE_16_64BIT | \
- TX_BURST_SIZE_16_64BIT)
+ (RX_BURST_SIZE_4_64BIT | \
+ TX_BURST_SIZE_4_64BIT)
#elif defined(__LITTLE_ENDIAN)
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
- (RX_BURST_SIZE_16_64BIT | \
- BLM_RX_NO_SWAP | \
- BLM_TX_NO_SWAP | \
- TX_BURST_SIZE_16_64BIT)
+ (RX_BURST_SIZE_4_64BIT | \
+ BLM_RX_NO_SWAP | \
+ BLM_TX_NO_SWAP | \
+ TX_BURST_SIZE_4_64BIT)
#else
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
#endif
entry = addr_crc(a);
}
- table[entry >> 2] |= 1 << (entry & 3);
+ table[entry >> 2] |= 1 << (8 * (entry & 3));
}
for (i = 0; i < 0x100; i += 4) {
struct mv643xx_eth_private *mp = netdev_priv(dev);
int i;
+ wrlp(mp, INT_MASK_EXT, 0x00000000);
wrlp(mp, INT_MASK, 0x00000000);
rdlp(mp, INT_MASK);
/*************************************************************************
* myri10ge.c: Myricom Myri-10G Ethernet driver.
*
- * Copyright (C) 2005 - 2007 Myricom, Inc.
+ * Copyright (C) 2005 - 2009 Myricom, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.4.4-1.398"
+#define MYRI10GE_VERSION_STR "1.4.4-1.401"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
if (status != 0) {
dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
status);
- goto abort_with_netdev;
+ goto abort_with_enabled;
}
pci_set_master(pdev);
}
if (status != 0) {
dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
- goto abort_with_netdev;
+ goto abort_with_enabled;
}
(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
&mgp->cmd_bus, GFP_KERNEL);
if (mgp->cmd == NULL)
- goto abort_with_netdev;
+ goto abort_with_enabled;
mgp->board_span = pci_resource_len(pdev, 0);
mgp->iomem_base = pci_resource_start(pdev, 0);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
-abort_with_netdev:
+abort_with_enabled:
+ pci_disable_device(pdev);
+abort_with_netdev:
free_netdev(netdev);
return status;
}
mgp->cmd, mgp->cmd_bus);
free_netdev(netdev);
+ pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
#define MAX_RX_BUFFER_LENGTH 1760
#define MAX_RX_JUMBO_BUFFER_LENGTH 8062
-#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512)
+#define MAX_RX_LRO_BUFFER_LENGTH (8062)
#define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2)
#define RX_JUMBO_DMA_MAP_LEN \
(MAX_RX_JUMBO_BUFFER_LENGTH - 2)
#define MAX_CMD_DESCRIPTORS 4096
#define MAX_RCV_DESCRIPTORS 16384
-#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_10G 8192
-#define MAX_JUMBO_RCV_DESCRIPTORS 1024
-#define MAX_LRO_RCV_DESCRIPTORS 64
+#define MAX_CMD_DESCRIPTORS_HOST 1024
+#define MAX_RCV_DESCRIPTORS_1G 2048
+#define MAX_RCV_DESCRIPTORS_10G 4096
+#define MAX_JUMBO_RCV_DESCRIPTORS 512
+#define MAX_LRO_RCV_DESCRIPTORS 8
#define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS
#define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS
#define MAX_RCV_DESC MAX_RCV_DESCRIPTORS
}
ring->tx_pending = adapter->max_tx_desc_count;
- ring->rx_max_pending = MAX_RCV_DESCRIPTORS;
+ if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+ ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
+ else
+ ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
ring->rx_mini_max_pending = 0;
SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
- /* ScatterGather support */
- netdev->features = NETIF_F_SG;
- netdev->features |= NETIF_F_IP_CSUM;
- netdev->features |= NETIF_F_TSO;
+ netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+ netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
if (NX_IS_REVISION_P3(revision_id)) {
- netdev->features |= NETIF_F_IPV6_CSUM;
- netdev->features |= NETIF_F_TSO6;
+ netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+ netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
}
- if (adapter->pci_using_dac)
+ if (adapter->pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
/*
* Set the CRB window to invalid. If any register in window 0 is
{
bool tso = false;
u8 opcode = TX_ETHER_PKT;
+ __be16 protocol = skb->protocol;
+ u16 flags = 0;
+
+ if (protocol == __constant_htons(ETH_P_8021Q)) {
+ struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
+ protocol = vh->h_vlan_encapsulated_proto;
+ flags = FLAGS_VLAN_TAGGED;
+ }
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
skb_shinfo(skb)->gso_size > 0) {
desc->total_hdr_length =
skb_transport_offset(skb) + tcp_hdrlen(skb);
- opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+ opcode = (protocol == __constant_htons(ETH_P_IPV6)) ?
TX_TCP_LSO6 : TX_TCP_LSO;
tso = true;
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
u8 l4proto;
- if (skb->protocol == htons(ETH_P_IP)) {
+ if (protocol == __constant_htons(ETH_P_IP)) {
l4proto = ip_hdr(skb)->protocol;
if (l4proto == IPPROTO_TCP)
opcode = TX_TCP_PKT;
else if(l4proto == IPPROTO_UDP)
opcode = TX_UDP_PKT;
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ } else if (protocol == __constant_htons(ETH_P_IPV6)) {
l4proto = ipv6_hdr(skb)->nexthdr;
if (l4proto == IPPROTO_TCP)
}
desc->tcp_hdr_offset = skb_transport_offset(skb);
desc->ip_hdr_offset = skb_network_offset(skb);
- netxen_set_tx_flags_opcode(desc, 0, opcode);
+ netxen_set_tx_flags_opcode(desc, flags, opcode);
return tso;
}
struct phy_driver *phydrv = to_phy_driver(drv);
struct phy_device *phydev = to_phy_device(dev);
- if ((!device_may_wakeup(phydev->dev.parent)) &&
- (phydrv && phydrv->suspend))
- ret = phydrv->suspend(phydev);
+ if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent))
+ ret = phydrv->suspend(phydev);
return ret;
}
struct phy_driver *phydrv = to_phy_driver(drv);
struct phy_device *phydev = to_phy_device(dev);
- if ((!device_may_wakeup(phydev->dev.parent)) &&
- (phydrv && phydrv->resume))
+ if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent))
ret = phydrv->resume(phydev);
return ret;
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
.driver = { .owner = THIS_MODULE, }
};
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
.driver = { .owner = THIS_MODULE, }
};
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
.driver = { .owner = THIS_MODULE, }
};
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
.driver = { .owner = THIS_MODULE, }
};
return err;
}
+static int tg3_request_firmware(struct tg3 *tp)
+{
+ const __be32 *fw_data;
+
+ if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
+ printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
+ tp->dev->name, tp->fw_needed);
+ return -ENOENT;
+ }
+
+ fw_data = (void *)tp->fw->data;
+
+ /* Firmware blob starts with version numbers, followed by
+ * start address and _full_ length including BSS sections
+ * (which must be longer than the actual data, of course
+ */
+
+ tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
+ if (tp->fw_len < (tp->fw->size - 12)) {
+ printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
+ tp->dev->name, tp->fw_len, tp->fw_needed);
+ release_firmware(tp->fw);
+ tp->fw = NULL;
+ return -EINVAL;
+ }
+
+ /* We no longer need firmware; we have it. */
+ tp->fw_needed = NULL;
+ return 0;
+}
+
static int tg3_open(struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
int err;
+ if (tp->fw_needed) {
+ err = tg3_request_firmware(tp);
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
+ if (err)
+ return err;
+ } else if (err) {
+ printk(KERN_WARNING "%s: TSO capability disabled.\n",
+ tp->dev->name);
+ tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
+ } else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+ printk(KERN_NOTICE "%s: TSO capability restored.\n",
+ tp->dev->name);
+ tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+ }
+ }
+
netif_carrier_off(tp->dev);
err = tg3_set_power_state(tp, PCI_D0);
struct net_device *dev;
struct tg3 *tp;
int err, pm_cap;
- const char *fw_name = NULL;
char str[40];
u64 dma_mask, persist_dma_mask;
tg3_init_bufmgr_config(tp);
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
- fw_name = FIRMWARE_TG3;
+ tp->fw_needed = FIRMWARE_TG3;
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
} else {
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
- }
- if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
- fw_name = FIRMWARE_TG3TSO5;
+ tp->fw_needed = FIRMWARE_TG3TSO5;
else
- fw_name = FIRMWARE_TG3TSO;
- }
-
- if (fw_name) {
- const __be32 *fw_data;
-
- err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev);
- if (err) {
- printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n",
- fw_name);
- goto err_out_iounmap;
- }
-
- fw_data = (void *)tp->fw->data;
-
- /* Firmware blob starts with version numbers, followed by
- start address and _full_ length including BSS sections
- (which must be longer than the actual data, of course */
-
- tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
- if (tp->fw_len < (tp->fw->size - 12)) {
- printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n",
- tp->fw_len, fw_name);
- err = -EINVAL;
- goto err_out_fw;
- }
+ tp->fw_needed = FIRMWARE_TG3TSO;
}
/* TSO is on by default on chips that support hardware TSO.
struct ethtool_coalesce coal;
/* firmware info */
+ const char *fw_needed;
const struct firmware *fw;
u32 fw_len; /* includes BSS */
};
{
struct usb_device *xdev = dev->udev;
int ret;
+ void *buffer;
+
+ buffer = kmalloc(size, GFP_NOIO);
+ if (buffer == NULL)
+ return -ENOMEM;
ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
- MCS7830_RD_BMREQ, 0x0000, index, data,
+ MCS7830_RD_BMREQ, 0x0000, index, buffer,
size, MCS7830_CTRL_TIMEOUT);
+ memcpy(data, buffer, size);
+ kfree(buffer);
+
return ret;
}
{
struct usb_device *xdev = dev->udev;
int ret;
+ void *buffer;
+
+ buffer = kmalloc(size, GFP_NOIO);
+ if (buffer == NULL)
+ return -ENOMEM;
+
+ memcpy(buffer, data, size);
ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
- MCS7830_WR_BMREQ, 0x0000, index, data,
+ MCS7830_WR_BMREQ, 0x0000, index, buffer,
size, MCS7830_CTRL_TIMEOUT);
+ kfree(buffer);
return ret;
}
static int velocity_init_td_ring(struct velocity_info *vptr)
{
dma_addr_t curr;
- unsigned int j;
+ int j;
/* Init the TD ring entries */
for (j = 0; j < vptr->tx.numq; j++) {
#include <linux/virtio.h>
#include <linux/virtio_net.h>
#include <linux/scatterlist.h>
+#include <linux/if_vlan.h>
static int napi_weight = 128;
module_param(napi_weight, int, 0444);
module_param(gso, bool, 0444);
/* FIXME: MTU in config. */
-#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
+#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
#define GOOD_COPY_LEN 128
struct virtnet_info
spin_lock_irqsave(&i2400m->rx_lock, flags);
ack_skb = i2400m->ack_skb;
if (ack_skb && !IS_ERR(ack_skb))
- kfree(ack_skb);
+ kfree_skb(ack_skb);
i2400m->ack_skb = ERR_PTR(code);
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
}
* NOTE: this function might realloc the skb (if it is too small),
* so always update with the one returned.
* ERR_PTR() is < 0 on error.
+ * Will return NULL if it cannot reallocate -- this can be
+ * considered a transient retryable error.
*/
static
struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
if (printk_ratelimit())
dev_err(dev, "RX: Can't reallocate skb to %d; "
"RX dropped\n", rx_size);
- kfree(rx_skb);
- result = 0;
+ kfree_skb(rx_skb);
+ rx_skb = NULL;
goto out; /* drop it...*/
}
kfree_skb(rx_skb);
if (IS_ERR(rx_skb))
goto out;
atomic_dec(&i2400mu->rx_pending_count);
- if (rx_skb->len == 0) { /* some ignorable condition */
+ if (rx_skb == NULL || rx_skb->len == 0) {
+ /* some "ignorable" condition */
kfree_skb(rx_skb);
continue;
}
static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
{
- if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
+ if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
return 0;
if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
return 0;
};
#define REG_DOMAIN_2GHZ_MASK (REQ_MASK & \
- (!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
+ (~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
#define REG_DOMAIN_5GHZ_MASK REQ_MASK
static struct reg_dmn_pair_mapping regDomainPairs[] = {
s8 scale_action = 0;
unsigned long flags;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- u16 fc, rate_mask;
+ u16 fc;
+ u16 rate_mask = 0;
struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
IWL_DEBUG_RATE("enter\n");
+ if (sta)
+ rate_mask = sta->supp_rates[sband->band];
+
/* Send management frames and broadcast/multicast data using lowest
* rate. */
fc = le16_to_cpu(hdr->frame_control);
is_multicast_ether_addr(hdr->addr1) ||
!sta || !priv_sta) {
IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
- info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ if (!rate_mask)
+ info->control.rates[0].idx =
+ rate_lowest_index(sband, NULL);
+ else
+ info->control.rates[0].idx =
+ rate_lowest_index(sband, sta);
return;
}
- rate_mask = sta->supp_rates[sband->band];
index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1);
if (sband->band == IEEE80211_BAND_5GHZ)
}
/* See if there's a better rate or modulation mode to try. */
- rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+ if (sta && sta->supp_rates[sband->band])
+ rs_rate_scale_perform(priv, hdr, sta, lq_sta);
out:
return;
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_lq_sta *lq_sta = priv_sta;
int rate_idx;
+ u64 mask_bit = 0;
IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
+ if (sta)
+ mask_bit = sta->supp_rates[sband->band];
+
/* Send management frames and broadcast/multicast data using lowest
* rate. */
if (!ieee80211_is_data(hdr->frame_control) ||
is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
- info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ if (!mask_bit)
+ info->control.rates[0].idx =
+ rate_lowest_index(sband, NULL);
+ else
+ info->control.rates[0].idx =
+ rate_lowest_index(sband, sta);
return;
}
dev_kfree_skb_any(skb);
IWL_DEBUG_MACDUMP("leave\n");
- return 0;
+ return NETDEV_TX_OK;
}
static int iwl_mac_add_interface(struct ieee80211_hw *hw,
IWL_ERROR("Error: Response NULL in '%s'\n",
get_cmd_string(cmd->id));
ret = -EIO;
- goto out;
+ goto cancel;
}
ret = 0;
IWL_ERROR("Error: Response NULL in '%s'\n",
get_cmd_string(cmd->id));
ret = -EIO;
- goto out;
+ goto cancel;
}
ret = 0;
dev_kfree_skb_any(skb);
IWL_DEBUG_MAC80211("leave\n");
- return 0;
+ return NETDEV_TX_OK;
}
static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
u8 pktdelay_2ms;
/* reserved */
u8 reserved1;
-};
+} __attribute__ ((packed));
/* RxPD Descriptor */
struct rxpd {
/* Pkt Priority */
u8 priority;
u8 reserved[3];
-};
+} __attribute__ ((packed));
struct cmd_header {
__le16 command;
struct lbs_offset_value {
u32 offset;
u32 value;
-};
+} __attribute__ ((packed));
/* Define general data structure */
/* cmd_DS_GEN */
__le16 seqnum;
__le16 result;
void *cmdresp[0];
-};
+} __attribute__ ((packed));
#define S_DS_GEN sizeof(struct cmd_ds_gen)
* bump this up a bit.
*/
uint8_t tlv[128];
-};
+} __attribute__ ((packed));
/*
* This scan handle Country Information IE(802.11d compliant)
mrvlietypes_chanlistparamset_t ChanListParamSet;
mrvlietypes_ratesparamset_t OpRateSet;
#endif
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_scan_rsp {
struct cmd_header hdr;
__le16 bssdescriptsize;
uint8_t nr_sets;
uint8_t bssdesc_and_tlvbuffer[0];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_get_log {
struct cmd_header hdr;
__le32 fcserror;
__le32 txframe;
__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
struct cmd_ds_mac_control {
struct cmd_header hdr;
__le16 action;
u16 reserved;
-};
+} __attribute__ ((packed));
struct cmd_ds_mac_multicast_adr {
struct cmd_header hdr;
__le16 action;
__le16 nr_of_adrs;
u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_authenticate {
u8 macaddr[ETH_ALEN];
u8 authtype;
u8 reserved[10];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_deauthenticate {
struct cmd_header hdr;
u8 macaddr[ETH_ALEN];
__le16 reasoncode;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_associate {
u8 peerstaaddr[6];
struct cmd_ds_802_11_associate_rsp {
struct ieeetypes_assocrsp assocRsp;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_set_wep {
struct cmd_header hdr;
/* 40, 128bit or TXWEP */
uint8_t keytype[4];
uint8_t keymaterial[4][16];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_3_get_stat {
__le32 xmitok;
__le32 rcverror;
__le32 rcvnobuffer;
__le32 rcvcrcerror;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_get_stat {
__le32 txfragmentcnt;
__le32 txbeacon;
__le32 rxbeacon;
__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_snmp_mib {
struct cmd_header hdr;
__le16 oid;
__le16 bufsize;
u8 value[128];
-};
+} __attribute__ ((packed));
struct cmd_ds_mac_reg_map {
__le16 buffersize;
u8 regmap[128];
__le16 reserved;
-};
+} __attribute__ ((packed));
struct cmd_ds_bbp_reg_map {
__le16 buffersize;
u8 regmap[128];
__le16 reserved;
-};
+} __attribute__ ((packed));
struct cmd_ds_rf_reg_map {
__le16 buffersize;
u8 regmap[64];
__le16 reserved;
-};
+} __attribute__ ((packed));
struct cmd_ds_mac_reg_access {
__le16 action;
__le16 offset;
__le32 value;
-};
+} __attribute__ ((packed));
struct cmd_ds_bbp_reg_access {
__le16 action;
__le16 offset;
u8 value;
u8 reserved[3];
-};
+} __attribute__ ((packed));
struct cmd_ds_rf_reg_access {
__le16 action;
__le16 offset;
u8 value;
u8 reserved[3];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_radio_control {
struct cmd_header hdr;
__le16 action;
__le16 control;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_beacon_control {
__le16 action;
__le16 beacon_enable;
__le16 beacon_period;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_sleep_params {
struct cmd_header hdr;
/* reserved field, should be set to zero */
__le16 reserved;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_inactivity_timeout {
struct cmd_header hdr;
/* Inactivity timeout in msec */
__le16 timeout;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_rf_channel {
struct cmd_header hdr;
__le16 rftype; /* unused */
__le16 reserved; /* unused */
u8 channellist[32]; /* unused */
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_rssi {
/* weighting factor */
__le16 reserved_0;
__le16 reserved_1;
__le16 reserved_2;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_rssi_rsp {
__le16 SNR;
__le16 noisefloor;
__le16 avgSNR;
__le16 avgnoisefloor;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_mac_address {
struct cmd_header hdr;
__le16 action;
u8 macadd[ETH_ALEN];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_rf_tx_power {
struct cmd_header hdr;
__le16 curlevel;
s8 maxlevel;
s8 minlevel;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_rf_antenna {
__le16 action;
/* Number of antennas or 0xffff(diversity) */
__le16 antennamode;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_monitor_mode {
__le16 action;
__le16 mode;
-};
+} __attribute__ ((packed));
struct cmd_ds_set_boot2_ver {
struct cmd_header hdr;
__le16 action;
__le16 version;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_fw_wake_method {
struct cmd_header hdr;
__le16 action;
__le16 method;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_sleep_period {
struct cmd_header hdr;
__le16 action;
__le16 period;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_ps_mode {
__le16 action;
__le16 multipledtim;
__le16 reserved;
__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
struct cmd_confirm_sleep {
struct cmd_header hdr;
__le16 multipledtim;
__le16 reserved;
__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_data_rate {
struct cmd_header hdr;
__le16 action;
__le16 reserved;
u8 rates[MAX_RATES];
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_rate_adapt_rateset {
struct cmd_header hdr;
__le16 action;
__le16 enablehwauto;
__le16 bitmap;
-};
+} __attribute__ ((packed));
struct cmd_ds_802_11_ad_hoc_start {
struct cmd_header hdr;
u8 pad[3];
u8 bssid[ETH_ALEN];
-};
+} __attribute__ ((packed));
struct adhoc_bssdesc {
u8 bssid[ETH_ALEN];
/* key material of size keylen */
u8 key[32];
-};
+} __attribute__ ((packed));
#define MAX_WOL_RULES 16
__le16 reserve;
__be32 sig_mask;
__be32 signature;
-};
+} __attribute__ ((packed));
struct wol_config {
uint8_t action;
uint8_t no_rules_in_cmd;
uint8_t result;
struct host_wol_rule rule[MAX_WOL_RULES];
-};
-
+} __attribute__ ((packed));
struct cmd_ds_host_sleep {
struct cmd_header hdr;
s = "UNKNOWN";
}
- printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+ printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
dev->name, s, status);
}
struct orinoco_private *priv = netdev_priv(dev);
u8 *buf;
unsigned long flags;
- int err = 0;
/* cut off at IEEE80211_MAX_DATA_LEN */
if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
(wrqu->data.length && (extra == NULL)))
return -EINVAL;
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
if (wrqu->data.length) {
buf = kmalloc(wrqu->data.length, GFP_KERNEL);
- if (buf == NULL) {
- err = -ENOMEM;
- goto out;
- }
+ if (buf == NULL)
+ return -ENOMEM;
memcpy(buf, extra, wrqu->data.length);
- kfree(priv->wpa_ie);
- priv->wpa_ie = buf;
- priv->wpa_ie_len = wrqu->data.length;
- } else {
- kfree(priv->wpa_ie);
- priv->wpa_ie = NULL;
- priv->wpa_ie_len = 0;
+ } else
+ buf = NULL;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ kfree(buf);
+ return -EBUSY;
}
+ kfree(priv->wpa_ie);
+ priv->wpa_ie = buf;
+ priv->wpa_ie_len = wrqu->data.length;
+
if (priv->wpa_ie) {
/* Looks like wl_lkm wants to check the auth alg, and
* somehow pass it to the firmware.
*/
}
-out:
orinoco_unlock(priv, &flags);
- return err;
+ return 0;
}
static int orinoco_ioctl_get_genie(struct net_device *dev,
}
if (err)
goto err;
-
- }
+ }
+ break;
case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
if (!priv->iq_autocal) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
struct p54_tx_data *entry_data;
- int pad = 0;
+ unsigned int pad = 0, frame_len;
range = (void *)info->rate_driver_data;
if (range->start_addr != addr) {
__skb_unlink(entry, &priv->tx_queue);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ frame_len = entry->len;
entry_hdr = (struct p54_hdr *) entry->data;
entry_data = (struct p54_tx_data *) entry_hdr->data;
priv->tx_stats[entry_data->hw_queue].len--;
info->status.ack_signal = p54_rssi_to_dbm(dev,
(int)payload->ack_rssi);
- if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+ /* Undo all changes to the frame. */
+ switch (entry_data->key_type) {
+ case P54_CRYPTO_TKIPMICHAEL: {
u8 *iv = (u8 *)(entry_data->align + pad +
- entry_data->crypt_offset);
+ entry_data->crypt_offset);
/* Restore the original TKIP IV. */
iv[2] = iv[0];
iv[0] = iv[1];
iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */
+
+ frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
+ break;
+ }
+ case P54_CRYPTO_AESCCMP:
+ frame_len -= 8; /* remove CCMP_MIC */
+ break;
+ case P54_CRYPTO_WEP:
+ frame_len -= 4; /* remove WEP_ICV */
+ break;
}
+ skb_trim(entry, frame_len);
skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
ieee80211_tx_status_irqsafe(dev, entry);
goto out;
skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET,
sizeof(struct p54_hdr) + sizeof(*tim),
- P54_CONTROL_TYPE_TIM, GFP_KERNEL);
+ P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
if (!skb)
return -ENOMEM;
err:
printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
- kfree_skb(skb);
+ p54_free_skb(dev, skb);
return -EINVAL;
}
algo = P54_CRYPTO_AESCCMP;
break;
default:
- return -EINVAL;
+ return -EOPNOTSUPP;
}
}
struct sk_buff *skb = urb->context;
struct ieee80211_hw *dev = (struct ieee80211_hw *)
usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
- struct p54u_priv *priv = dev->priv;
- skb_pull(skb, priv->common.tx_hdr_len);
- if (FREE_AFTER_TX(skb))
- p54_free_skb(dev, skb);
+ p54_free_skb(dev, skb);
}
static void p54u_tx_dummy_cb(struct urb *urb) { }
p54u_tx_dummy_cb, dev);
usb_fill_bulk_urb(data_urb, priv->udev,
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
- skb->data, skb->len, p54u_tx_cb, skb);
+ skb->data, skb->len, FREE_AFTER_TX(skb) ?
+ p54u_tx_cb : p54u_tx_dummy_cb, skb);
+ addr_urb->transfer_flags |= URB_ZERO_PACKET;
+ data_urb->transfer_flags |= URB_ZERO_PACKET;
usb_anchor_urb(addr_urb, &priv->submitted);
err = usb_submit_urb(addr_urb, GFP_ATOMIC);
goto out;
}
- usb_anchor_urb(addr_urb, &priv->submitted);
+ usb_anchor_urb(data_urb, &priv->submitted);
err = usb_submit_urb(data_urb, GFP_ATOMIC);
if (err)
usb_unanchor_urb(data_urb);
{
struct p54u_priv *priv = dev->priv;
struct urb *data_urb;
- struct lm87_tx_hdr *hdr;
- __le32 checksum;
- __le32 addr = ((struct p54_hdr *)skb->data)->req_id;
+ struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
data_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!data_urb)
return;
- checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
- hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr));
- hdr->chksum = checksum;
- hdr->device_addr = addr;
+ hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
+ hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
usb_fill_bulk_urb(data_urb, priv->udev,
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
- skb->data, skb->len, p54u_tx_cb, skb);
+ hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
+ p54u_tx_cb : p54u_tx_dummy_cb, skb);
data_urb->transfer_flags |= URB_ZERO_PACKET;
usb_anchor_urb(data_urb, &priv->submitted);
if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
usb_unanchor_urb(data_urb);
- skb_pull(skb, sizeof(*hdr));
p54_free_skb(dev, skb);
}
usb_free_urb(data_urb);
{
struct p54u_priv *priv = dev->priv;
struct urb *int_urb, *data_urb;
- struct net2280_tx_hdr *hdr;
+ struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
struct net2280_reg_write *reg;
int err = 0;
- __le32 addr = ((struct p54_hdr *) skb->data)->req_id;
- __le16 len = cpu_to_le16(skb->len);
reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
if (!reg)
reg->addr = cpu_to_le32(P54U_DEV_BASE);
reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
- hdr = (void *)skb_push(skb, sizeof(*hdr));
memset(hdr, 0, sizeof(*hdr));
- hdr->len = len;
- hdr->device_addr = addr;
+ hdr->len = cpu_to_le16(skb->len);
+ hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id;
usb_fill_bulk_urb(int_urb, priv->udev,
usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
* free what's inside the transfer_buffer after the callback routine
* has completed.
*/
- int_urb->transfer_flags |= URB_FREE_BUFFER;
+ int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
usb_fill_bulk_urb(data_urb, priv->udev,
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
- skb->data, skb->len, p54u_tx_cb, skb);
+ hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
+ p54u_tx_cb : p54u_tx_dummy_cb, skb);
+ data_urb->transfer_flags |= URB_ZERO_PACKET;
usb_anchor_urb(int_urb, &priv->submitted);
err = usb_submit_urb(int_urb, GFP_ATOMIC);
char *end_buf,
struct ndis_80211_bssid_ex *bssid)
{
-#ifdef DEBUG
struct usbnet *usbdev = netdev_priv(dev);
-#endif
u8 *ie;
char *current_val;
int bssid_len, ie_len, i;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
struct ieee80211_rate *rate =
ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
const struct rt2x00_rate *hwrate;
* When preamble is enabled we should set the
* preamble bit for the signal.
*/
- if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
txdesc->signal |= 0x08;
}
}
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
+ if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
return;
cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
buf, skb->len, rtl8187_tx_cb, skb);
+ urb->transfer_flags |= URB_ZERO_PACKET;
usb_anchor_urb(urb, &priv->anchored);
rc = usb_submit_urb(urb, GFP_ATOMIC);
if (rc < 0) {
{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
return;
fail:
+ entry->event = NULL;
cpu_buf->sample_lost_overflow++;
}
int oprofile_add_data(struct op_entry *entry, unsigned long val)
{
+ if (!entry->event)
+ return 0;
return op_cpu_buffer_add_data(entry, val);
}
int oprofile_write_commit(struct op_entry *entry)
{
+ if (!entry->event)
+ return -EINVAL;
return op_cpu_buffer_write_commit(entry);
}
cpu_buf->last_task = NULL;
}
+/*
+ * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be
+ * called only if op_cpu_buffer_write_reserve() did not return NULL or
+ * entry->event != NULL, otherwise entry->size or entry->event will be
+ * used uninitialized.
+ */
+
struct op_sample
*op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size);
int op_cpu_buffer_write_commit(struct op_entry *entry);
mutex_lock(&slot->ctrl->crit_sect);
/* has it been >1 sec since our last toggle? */
- if ((get_seconds() - slot->last_emi_toggle) < 1)
+ if ((get_seconds() - slot->last_emi_toggle) < 1) {
+ mutex_unlock(&slot->ctrl->crit_sect);
return -EINVAL;
+ }
/* see what our current state is */
retval = get_lock_status(hotplug_slot, &value);
entry->msi_attrib.masked = 1;
entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */
entry->msi_attrib.pos = pos;
- if (entry->msi_attrib.maskbit) {
- entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
- entry->msi_attrib.is_64);
- }
entry->dev = dev;
if (entry->msi_attrib.maskbit) {
- unsigned int maskbits, temp;
+ unsigned int base, maskbits, temp;
+
+ base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+ entry->mask_base = (void __iomem *)(long)base;
+
/* All MSIs are unmasked by default, Mask them all */
- pci_read_config_dword(dev,
- msi_mask_bits_reg(pos, entry->msi_attrib.is_64),
- &maskbits);
+ pci_read_config_dword(dev, base, &maskbits);
temp = (1 << multi_msi_capable(control));
temp = ((temp - 1) & ~temp);
maskbits |= temp;
- pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);
+ pci_write_config_dword(dev, base, maskbits);
entry->msi_attrib.maskbits_mask = temp;
}
list_add_tail(&entry->list, &dev->msi_list);
int i = 0;
if (drv && drv->suspend) {
+ pci_dev->state_saved = false;
+
i = drv->suspend(pci_dev, state);
suspend_report_result(drv->suspend, i);
- } else {
- pci_save_state(pci_dev);
- /*
- * This is for compatibility with existing code with legacy PM
- * support.
- */
- pci_pm_set_unknown_state(pci_dev);
+ if (i)
+ return i;
+
+ if (pci_dev->state_saved)
+ goto Fixup;
+
+ if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+ goto Fixup;
}
+ pci_save_state(pci_dev);
+ /*
+ * This is for compatibility with existing code with legacy PM support.
+ */
+ pci_pm_set_unknown_state(pci_dev);
+
+ Fixup:
pci_fixup_device(pci_fixup_suspend, pci_dev);
return i;
static int pci_legacy_resume_early(struct device *dev)
{
- int error = 0;
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
- pci_fixup_device(pci_fixup_resume_early, pci_dev);
-
- if (drv && drv->resume_early)
- error = drv->resume_early(pci_dev);
- return error;
+ return drv && drv->resume_early ?
+ drv->resume_early(pci_dev) : 0;
}
static int pci_legacy_resume(struct device *dev)
{
- int error;
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
pci_fixup_device(pci_fixup_resume, pci_dev);
- if (drv && drv->resume) {
- error = drv->resume(pci_dev);
- } else {
- /* restore the PCI config space */
- pci_restore_state(pci_dev);
- error = pci_pm_reenable_device(pci_dev);
- }
- return error;
+ return drv && drv->resume ?
+ drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev);
}
/* Auxiliary functions used by the new power management framework */
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
- struct pci_dev *parent = pci_dev->bus->self;
- int error = 0;
-
- /* Check if the device's bus is operational */
- if (!parent || parent->current_state == PCI_D0) {
- pci_restore_state(pci_dev);
- pci_update_current_state(pci_dev, PCI_D0);
- } else {
- dev_warn(&pci_dev->dev, "unable to restore config, "
- "bridge %s in low power state D%d\n", pci_name(parent),
- parent->current_state);
- pci_dev->current_state = PCI_UNKNOWN;
- error = -EAGAIN;
- }
-
- return error;
-}
-
-static bool pci_is_bridge(struct pci_dev *pci_dev)
-{
- return !!(pci_dev->subordinate);
-}
-
static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
{
- if (pci_restore_standard_config(pci_dev))
- pci_fixup_device(pci_fixup_resume_early, pci_dev);
+ pci_restore_standard_config(pci_dev);
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
}
static int pci_pm_default_resume(struct pci_dev *pci_dev)
{
- /*
- * pci_restore_standard_config() should have been called once already,
- * but it would have failed if the device's parent bridge had not been
- * in power state D0 at that time. Check it and try again if necessary.
- */
- if (pci_dev->current_state == PCI_UNKNOWN) {
- int error = pci_restore_standard_config(pci_dev);
- if (error)
- return error;
- }
-
pci_fixup_device(pci_fixup_resume, pci_dev);
if (!pci_is_bridge(pci_dev))
struct device_driver *drv = dev->driver;
int error = 0;
+ pci_pm_default_resume_noirq(pci_dev);
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
- pci_pm_default_resume_noirq(pci_dev);
-
if (drv && drv->pm && drv->pm->resume_noirq)
error = drv->pm->resume_noirq(dev);
struct device_driver *drv = dev->driver;
int error = 0;
+ pci_pm_default_resume_noirq(pci_dev);
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
- pci_pm_default_resume_noirq(pci_dev);
-
if (drv && drv->pm && drv->pm->restore_noirq)
error = drv->pm->restore_noirq(dev);
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
-unsigned int pci_pm_d3_delay = 10;
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
#ifdef CONFIG_PCI_DOMAINS
int pci_domains_supported = 1;
* given PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ * @wait: If 'true', wait for the device to change its power state
*
* RETURN VALUE:
* -EINVAL if the requested state is invalid.
* 0 if device's power state has been successfully changed.
*/
static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
{
u16 pmcsr;
bool need_restore = false;
break;
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
- && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+ && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
need_restore = true;
+ wait = true;
+ }
/* Fall-through: force to D0 */
default:
pmcsr = 0;
/* enter specified state */
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
+ if (!wait)
+ return 0;
+
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
msleep(pci_pm_d3_delay);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
- udelay(200);
+ udelay(PCI_PM_D2_DELAY);
dev->current_state = state;
if (need_restore)
pci_restore_bars(dev);
- if (dev->bus->self)
+ if (wait && dev->bus->self)
pcie_aspm_pm_state_change(dev->bus->self);
return 0;
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
- error = pci_raw_set_power_state(dev, state);
+ error = pci_raw_set_power_state(dev, state, true);
if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
/* Allow the platform to finalize the transition */
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+ dev->state_saved = true;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
if ((i = pci_save_pcix_state(dev)) != 0)
"unable to preallocate PCI-X save buffer\n");
}
+/**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @dev: PCI device to handle
+ *
+ * This function assumes that the device's configuration space is accessible.
+ * If the device needs to be powered up, the function will wait for it to
+ * change the state.
+ */
+int pci_restore_standard_config(struct pci_dev *dev)
+{
+ pci_power_t prev_state;
+ int error;
+
+ pci_restore_state(dev);
+ pci_update_current_state(dev, PCI_D0);
+
+ prev_state = dev->current_state;
+ if (prev_state == PCI_D0)
+ return 0;
+
+ error = pci_raw_set_power_state(dev, PCI_D0, false);
+ if (error)
+ return error;
+
+ if (pci_is_bridge(dev)) {
+ if (prev_state > PCI_D1)
+ mdelay(PCI_PM_BUS_WAIT);
+ } else {
+ switch(prev_state) {
+ case PCI_D3cold:
+ case PCI_D3hot:
+ mdelay(pci_pm_d3_delay);
+ break;
+ case PCI_D2:
+ udelay(PCI_PM_D2_DELAY);
+ break;
+ }
+ }
+
+ dev->current_state = PCI_D0;
+
+ return 0;
+}
+
/**
* pci_enable_ari - enable ARI forwarding if hardware support it
* @dev: the PCI device
extern void pci_pm_init(struct pci_dev *dev);
extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+extern int pci_restore_standard_config(struct pci_dev *dev);
+
+static inline bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+ return !!(pci_dev->subordinate);
+}
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
case KE_SW:
set_bit(EV_SW, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->swbit);
+
+ /* Set initial dock state */
+ input_report_switch(hp_wmi_input_dev, key->keycode,
+ hp_wmi_dock_state());
+ input_sync(hp_wmi_input_dev);
break;
}
}
bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
bluetooth_rfkill->user_claim_unsupported = 1;
err = rfkill_register(bluetooth_rfkill);
+ if (err)
goto register_bluetooth_error;
}
static inline unsigned int get_irq_flags(struct resource *res)
{
- unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+ unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
flags |= res->flags & IRQF_TRIGGER_MASK;
},
};
-static int __init wm8400_regulator_probe(struct platform_device *pdev)
+static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
static void lcs_tasklet(unsigned long);
static void lcs_start_kernel_thread(struct work_struct *);
static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
+#ifdef CONFIG_IP_MULTICAST
static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+#endif /* CONFIG_IP_MULTICAST */
static int lcs_recovery(void *ptr);
/**
lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
return 0;
}
+#endif /* CONFIG_IP_MULTICAST */
+
/**
* function called by net device to
* handle multicast address relevant things
static void
lcs_set_multicast_list(struct net_device *dev)
{
+#ifdef CONFIG_IP_MULTICAST
struct lcs_card *card;
LCS_DBF_TEXT(4, trace, "setmulti");
if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
schedule_work(&card->kernel_thread_starter);
-}
-
#endif /* CONFIG_IP_MULTICAST */
+}
static long
lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
&evt->ext_list_token);
if (!evt->ext_list) {
- scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
+ scsi_dma_unmap(scmd);
+ if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+ scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
return -ENOMEM;
}
}
kfree(q->pool[i]);
if (q->pool)
kfree(q->pool);
+ kfree(q->queue);
}
EXPORT_SYMBOL_GPL(iscsi_pool_free);
struct Scsi_Host *host = rport_to_shost(rport);
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ if (!fcport)
+ return;
+
qla2x00_abort_fcport_cmds(fcport);
/*
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ if (!fcport)
+ return;
+
/*
* At this point all fcport's software-states are cleared. Perform any
* final cleanup of firmware resources (PCBs and XCBs).
extern void qla81xx_update_fw_options(scsi_qla_host_t *);
extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
+extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
extern int qla2x00_loop_resync(scsi_qla_host_t *);
WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE);
RD_REG_DWORD(®->hccr);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ if (IS_NOPOLLING_TYPE(ha))
+ ha->isp_ops->enable_intrs(ha);
}
/* On sparc systems, obtain port and node WWN from firmware
uint32_t i;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
+
+ qla_printk(KERN_INFO, ha,
+ "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
return QLA_FUNCTION_FAILED;
}
-int
-qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+static int
+qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
int segments, fragment;
qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
"from: " QLA_FW_URL ".\n");
- /* Try to load RISC code from flash. */
- qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
- "outdated) firmware from flash.\n");
- return qla24xx_load_risc_flash(vha, srisc_addr);
+ return QLA_FUNCTION_FAILED;
}
+ qla_printk(KERN_INFO, ha,
+ "FW: Loading via request-firmware...\n");
+
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
return QLA_FUNCTION_FAILED;
}
+int
+qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+ int rval;
+
+ /*
+ * FW Load priority:
+ * 1) Firmware via request-firmware interface (.bin file).
+ * 2) Firmware residing in flash.
+ */
+ rval = qla24xx_load_risc_blob(vha, srisc_addr);
+ if (rval == QLA_SUCCESS)
+ return rval;
+
+ return qla24xx_load_risc_flash(vha, srisc_addr);
+}
+
+int
+qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+ int rval;
+
+ /*
+ * FW Load priority:
+ * 1) Firmware residing in flash.
+ * 2) Firmware via request-firmware interface (.bin file).
+ */
+ rval = qla24xx_load_risc_flash(vha, srisc_addr);
+ if (rval == QLA_SUCCESS)
+ return rval;
+
+ return qla24xx_load_risc_blob(vha, srisc_addr);
+}
+
void
qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
{
static int
qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
{
+#define MIN_MSIX_COUNT 2
int i, ret;
struct msix_entry *entries;
struct qla_msix_entry *qentry;
ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
if (ret) {
+ if (ret < MIN_MSIX_COUNT)
+ goto msix_failed;
+
qla_printk(KERN_WARNING, ha,
"MSI-X: Failed to enable support -- %d/%d\n"
" Retry with %d vectors\n", ha->msix_count, ret, ret);
ha->msix_count = ret;
ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
if (ret) {
+msix_failed:
qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
" support, giving up -- %d/%d\n",
ha->msix_count, ret);
* seconds. This is to serialize actual issuing of mailbox cmds during
* non ISP abort time.
*/
- if (!abort_active) {
- if (!wait_for_completion_timeout(&ha->mbx_cmd_comp,
- mcp->tov * HZ)) {
- /* Timeout occurred. Return error. */
- DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
- "Exiting.\n", __func__, base_vha->host_no));
- return QLA_FUNCTION_TIMEOUT;
- }
+ if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
+ /* Timeout occurred. Return error. */
+ DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+ "Exiting.\n", __func__, base_vha->host_no));
+ return QLA_FUNCTION_TIMEOUT;
}
ha->flags.mbox_busy = 1;
}
/* Allow next mbx cmd to come in. */
- if (!abort_active)
- complete(&ha->mbx_cmd_comp);
+ complete(&ha->mbx_cmd_comp);
if (rval) {
DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
static void qla2x00_free_device(scsi_qla_host_t *);
-static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-
int ql2xfdmienable=1;
module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xfdmienable,
if (ha->isp_ops->abort_command(vha, sp, req)) {
DEBUG2(printk("%s(%ld): abort_command "
"mbx failed.\n", __func__, vha->host_no));
+ ret = FAILED;
} else {
DEBUG3(printk("%s(%ld): abort_command "
"mbx success.\n", __func__, vha->host_no));
* supported addressing method.
*/
static void
-qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
+qla2x00_config_dma_addressing(struct qla_hw_data *ha)
{
- struct qla_hw_data *ha = vha->hw;
/* Assume a 32bit DMA mask. */
ha->flags.enable_64bit_addressing = 0;
.reset_adapter = qla24xx_reset_adapter,
.nvram_config = qla81xx_nvram_config,
.update_fw_options = qla81xx_update_fw_options,
- .load_risc = qla24xx_load_risc,
+ .load_risc = qla81xx_load_risc,
.pci_info_str = qla24xx_pci_info_str,
.fw_version_str = qla24xx_fw_version_str,
.intr_handler = qla24xx_intr_handler,
set_bit(0, (unsigned long *) ha->vp_idx_map);
+ qla2x00_config_dma_addressing(ha);
ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
if (!ret) {
qla_printk(KERN_WARNING, ha,
"[ERROR] Failed to allocate memory for scsi_host\n");
ret = -ENOMEM;
+ qla2x00_mem_free(ha);
+ qla2x00_free_que(ha, req, rsp);
goto probe_hw_failed;
}
pci_set_drvdata(pdev, base_vha);
- qla2x00_config_dma_addressing(base_vha);
-
host = base_vha->host;
base_vha->req_ques[0] = req->id;
host->can_queue = req->length + 128;
/* Set up the irqs */
ret = qla2x00_request_irqs(ha, rsp);
if (ret)
- goto probe_failed;
-
+ goto probe_init_failed;
/* Alloc arrays of request and response ring ptrs */
if (!qla2x00_alloc_queues(ha)) {
qla_printk(KERN_WARNING, ha,
"[ERROR] Failed to allocate memory for queue"
" pointers\n");
- goto probe_failed;
+ goto probe_init_failed;
}
ha->rsp_q_map[0] = rsp;
ha->req_q_map[0] = req;
return 0;
+probe_init_failed:
+ qla2x00_free_que(ha, req, rsp);
+ ha->max_queues = 0;
+
probe_failed:
qla2x00_free_device(base_vha);
if (!ha->fdt_wrt_disable)
return;
- /* Disable flash write-protection. */
+ /* Disable flash write-protection, first clear SR protection bit */
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
- /* Some flash parts need an additional zero-write to clear bits.*/
+ /* Then write zero again to clear remaining SR bits.*/
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
}
uint32_t dwords)
{
int ret;
- uint32_t liter, miter;
+ uint32_t liter;
uint32_t sec_mask, rest_addr;
- uint32_t fdata, findex;
+ uint32_t fdata;
dma_addr_t optrom_dma;
void *optrom = NULL;
- uint32_t *s, *d;
struct qla_hw_data *ha = vha->hw;
ret = QLA_SUCCESS;
}
rest_addr = (ha->fdt_block_size >> 2) - 1;
- sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
+ sec_mask = ~rest_addr;
qla24xx_unprotect_flash(ha);
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-
- findex = faddr;
- fdata = (findex & sec_mask) << 2;
+ fdata = (faddr & sec_mask) << 2;
/* Are we at the beginning of a sector? */
- if ((findex & rest_addr) == 0) {
+ if ((faddr & rest_addr) == 0) {
/* Do sector unprotect. */
if (ha->fdt_unprotect_sec_cmd)
qla24xx_write_flash_dword(ha,
(fdata & 0xff00) |((fdata << 16) &
0xff0000) | ((fdata >> 16) & 0xff));
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk("Unable to flash sector: "
+ DEBUG9(qla_printk("Unable to erase sector: "
"address=%x.\n", faddr));
break;
}
/* Go with burst-write. */
if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
/* Copy data to DMA'ble buffer. */
- for (miter = 0, s = optrom, d = dwptr;
- miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
- *s = cpu_to_le32(*d);
+ memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
ret = qla2x00_load_ram(vha, optrom_dma,
flash_data_addr(ha, faddr),
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.00-k1"
+#define QLA2XXX_VERSION "8.03.00-k2"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
uint8_t ip_addr[ISCSI_IPADDR_SIZE];
uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */
uint8_t iscsi_alias[0x20];
+ uint8_t isid[6];
};
/*
DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
__func__, fw_ddb_index));
list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
- if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
- ISCSI_NAME_SIZE) == 0) {
+ if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
+ ISCSI_NAME_SIZE) == 0) &&
+ (ddb_entry->tpgt ==
+ le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) &&
+ (memcmp(ddb_entry->isid, fw_ddb_entry->isid,
+ sizeof(ddb_entry->isid)) == 0)) {
found++;
break;
}
ddb_entry->port = le16_to_cpu(fw_ddb_entry->port);
ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+ memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid));
+
memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
min(sizeof(ddb_entry->iscsi_name),
sizeof(fw_ddb_entry->iscsi_name)));
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+#define PCI_VENDOR_ID_ADVANTECH 0x13fe
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#endif
static struct pci_device_id serial_pci_tbl[] = {
+ /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+ PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+ pbn_b2_8_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
- depends on MIPS && SOC_PNX8550
+ depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
select SERIAL_CORE
help
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
return rc;
}
-static void jsm_remove_one(struct pci_dev *pdev)
+static void __devexit jsm_remove_one(struct pci_dev *pdev)
{
struct jsm_board *brd = pci_get_drvdata(pdev);
int i = 0;
{
unsigned long flags;
unsigned int baud, baudclk;
+#if defined(CONFIG_M5272)
+ unsigned int baudfr;
+#endif
unsigned char mr1, mr2;
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+#if defined(CONFIG_M5272)
+ baudclk = (MCF_BUSCLK / baud) / 32;
+ baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
+#else
baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
+#endif
mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
mr2 = 0;
writeb(mr2, port->membase + MCFUART_UMR);
writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
+#if defined(CONFIG_M5272)
+ writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
+#endif
writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
port->membase + MCFUART_UCSR);
writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-#define SCIF_ORER 0x0200 /* overrun error bit */
+# define PORT_PTCR 0xA405011EUL
+# define PORT_PVCR 0xA4050122UL
+# define SCIF_ORER 0x0200 /* overrun error bit */
#elif defined(CONFIG_SH_RTS7751R2D)
# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8)
SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16)
SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8)
+SCIx_FNS(SCSPTR, 0, 0, 0, 0)
SCIF_FNS(SCTDSR, 0x0c, 8)
SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
#
comment "SPI Protocol Masters"
-config SPI_AT25
- tristate "SPI EEPROMs from most vendors"
- depends on SYSFS
- help
- Enable this driver to get read/write support to most SPI EEPROMs,
- after you configure the board init code to know about each eeprom
- on your target board.
-
- This driver can also be built as a module. If so, the module
- will be called at25.
-
config SPI_SPIDEV
tristate "User mode SPI device driver support"
depends on EXPERIMENTAL
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_AT25) += at25.o
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
# ... add above this line ...
+++ /dev/null
-/*
- * at25.c -- support most SPI EEPROMs, such as Atmel AT25 models
- *
- * Copyright (C) 2006 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/sched.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-
-
-/*
- * NOTE: this is an *EEPROM* driver. The vagaries of product naming
- * mean that some AT25 products are EEPROMs, and others are FLASH.
- * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver,
- * not this one!
- */
-
-struct at25_data {
- struct spi_device *spi;
- struct mutex lock;
- struct spi_eeprom chip;
- struct bin_attribute bin;
- unsigned addrlen;
-};
-
-#define AT25_WREN 0x06 /* latch the write enable */
-#define AT25_WRDI 0x04 /* reset the write enable */
-#define AT25_RDSR 0x05 /* read status register */
-#define AT25_WRSR 0x01 /* write status register */
-#define AT25_READ 0x03 /* read byte(s) */
-#define AT25_WRITE 0x02 /* write byte(s)/sector */
-
-#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */
-#define AT25_SR_WEN 0x02 /* write enable (latched) */
-#define AT25_SR_BP0 0x04 /* BP for software writeprotect */
-#define AT25_SR_BP1 0x08
-#define AT25_SR_WPEN 0x80 /* writeprotect enable */
-
-
-#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */
-
-/* Specs often allow 5 msec for a page write, sometimes 20 msec;
- * it's important to recover from write timeouts.
- */
-#define EE_TIMEOUT 25
-
-/*-------------------------------------------------------------------------*/
-
-#define io_limit PAGE_SIZE /* bytes */
-
-static ssize_t
-at25_ee_read(
- struct at25_data *at25,
- char *buf,
- unsigned offset,
- size_t count
-)
-{
- u8 command[EE_MAXADDRLEN + 1];
- u8 *cp;
- ssize_t status;
- struct spi_transfer t[2];
- struct spi_message m;
-
- cp = command;
- *cp++ = AT25_READ;
-
- /* 8/16/24-bit address is written MSB first */
- switch (at25->addrlen) {
- default: /* case 3 */
- *cp++ = offset >> 16;
- case 2:
- *cp++ = offset >> 8;
- case 1:
- case 0: /* can't happen: for better codegen */
- *cp++ = offset >> 0;
- }
-
- spi_message_init(&m);
- memset(t, 0, sizeof t);
-
- t[0].tx_buf = command;
- t[0].len = at25->addrlen + 1;
- spi_message_add_tail(&t[0], &m);
-
- t[1].rx_buf = buf;
- t[1].len = count;
- spi_message_add_tail(&t[1], &m);
-
- mutex_lock(&at25->lock);
-
- /* Read it all at once.
- *
- * REVISIT that's potentially a problem with large chips, if
- * other devices on the bus need to be accessed regularly or
- * this chip is clocked very slowly
- */
- status = spi_sync(at25->spi, &m);
- dev_dbg(&at25->spi->dev,
- "read %Zd bytes at %d --> %d\n",
- count, offset, (int) status);
-
- mutex_unlock(&at25->lock);
- return status ? status : count;
-}
-
-static ssize_t
-at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
- char *buf, loff_t off, size_t count)
-{
- struct device *dev;
- struct at25_data *at25;
-
- dev = container_of(kobj, struct device, kobj);
- at25 = dev_get_drvdata(dev);
-
- if (unlikely(off >= at25->bin.size))
- return 0;
- if ((off + count) > at25->bin.size)
- count = at25->bin.size - off;
- if (unlikely(!count))
- return count;
-
- return at25_ee_read(at25, buf, off, count);
-}
-
-
-static ssize_t
-at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
-{
- ssize_t status = 0;
- unsigned written = 0;
- unsigned buf_size;
- u8 *bounce;
-
- /* Temp buffer starts with command and address */
- buf_size = at25->chip.page_size;
- if (buf_size > io_limit)
- buf_size = io_limit;
- bounce = kmalloc(buf_size + at25->addrlen + 1, GFP_KERNEL);
- if (!bounce)
- return -ENOMEM;
-
- /* For write, rollover is within the page ... so we write at
- * most one page, then manually roll over to the next page.
- */
- bounce[0] = AT25_WRITE;
- mutex_lock(&at25->lock);
- do {
- unsigned long timeout, retries;
- unsigned segment;
- unsigned offset = (unsigned) off;
- u8 *cp = bounce + 1;
-
- *cp = AT25_WREN;
- status = spi_write(at25->spi, cp, 1);
- if (status < 0) {
- dev_dbg(&at25->spi->dev, "WREN --> %d\n",
- (int) status);
- break;
- }
-
- /* 8/16/24-bit address is written MSB first */
- switch (at25->addrlen) {
- default: /* case 3 */
- *cp++ = offset >> 16;
- case 2:
- *cp++ = offset >> 8;
- case 1:
- case 0: /* can't happen: for better codegen */
- *cp++ = offset >> 0;
- }
-
- /* Write as much of a page as we can */
- segment = buf_size - (offset % buf_size);
- if (segment > count)
- segment = count;
- memcpy(cp, buf, segment);
- status = spi_write(at25->spi, bounce,
- segment + at25->addrlen + 1);
- dev_dbg(&at25->spi->dev,
- "write %u bytes at %u --> %d\n",
- segment, offset, (int) status);
- if (status < 0)
- break;
-
- /* REVISIT this should detect (or prevent) failed writes
- * to readonly sections of the EEPROM...
- */
-
- /* Wait for non-busy status */
- timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
- retries = 0;
- do {
- int sr;
-
- sr = spi_w8r8(at25->spi, AT25_RDSR);
- if (sr < 0 || (sr & AT25_SR_nRDY)) {
- dev_dbg(&at25->spi->dev,
- "rdsr --> %d (%02x)\n", sr, sr);
- /* at HZ=100, this is sloooow */
- msleep(1);
- continue;
- }
- if (!(sr & AT25_SR_nRDY))
- break;
- } while (retries++ < 3 || time_before_eq(jiffies, timeout));
-
- if (time_after(jiffies, timeout)) {
- dev_err(&at25->spi->dev,
- "write %d bytes offset %d, "
- "timeout after %u msecs\n",
- segment, offset,
- jiffies_to_msecs(jiffies -
- (timeout - EE_TIMEOUT)));
- status = -ETIMEDOUT;
- break;
- }
-
- off += segment;
- buf += segment;
- count -= segment;
- written += segment;
-
- } while (count > 0);
-
- mutex_unlock(&at25->lock);
-
- kfree(bounce);
- return written ? written : status;
-}
-
-static ssize_t
-at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr,
- char *buf, loff_t off, size_t count)
-{
- struct device *dev;
- struct at25_data *at25;
-
- dev = container_of(kobj, struct device, kobj);
- at25 = dev_get_drvdata(dev);
-
- if (unlikely(off >= at25->bin.size))
- return -EFBIG;
- if ((off + count) > at25->bin.size)
- count = at25->bin.size - off;
- if (unlikely(!count))
- return count;
-
- return at25_ee_write(at25, buf, off, count);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int at25_probe(struct spi_device *spi)
-{
- struct at25_data *at25 = NULL;
- const struct spi_eeprom *chip;
- int err;
- int sr;
- int addrlen;
-
- /* Chip description */
- chip = spi->dev.platform_data;
- if (!chip) {
- dev_dbg(&spi->dev, "no chip description\n");
- err = -ENODEV;
- goto fail;
- }
-
- /* For now we only support 8/16/24 bit addressing */
- if (chip->flags & EE_ADDR1)
- addrlen = 1;
- else if (chip->flags & EE_ADDR2)
- addrlen = 2;
- else if (chip->flags & EE_ADDR3)
- addrlen = 3;
- else {
- dev_dbg(&spi->dev, "unsupported address type\n");
- err = -EINVAL;
- goto fail;
- }
-
- /* Ping the chip ... the status register is pretty portable,
- * unlike probing manufacturer IDs. We do expect that system
- * firmware didn't write it in the past few milliseconds!
- */
- sr = spi_w8r8(spi, AT25_RDSR);
- if (sr < 0 || sr & AT25_SR_nRDY) {
- dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr);
- err = -ENXIO;
- goto fail;
- }
-
- if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) {
- err = -ENOMEM;
- goto fail;
- }
-
- mutex_init(&at25->lock);
- at25->chip = *chip;
- at25->spi = spi_dev_get(spi);
- dev_set_drvdata(&spi->dev, at25);
- at25->addrlen = addrlen;
-
- /* Export the EEPROM bytes through sysfs, since that's convenient.
- * Default to root-only access to the data; EEPROMs often hold data
- * that's sensitive for read and/or write, like ethernet addresses,
- * security codes, board-specific manufacturing calibrations, etc.
- */
- at25->bin.attr.name = "eeprom";
- at25->bin.attr.mode = S_IRUSR;
- at25->bin.read = at25_bin_read;
-
- at25->bin.size = at25->chip.byte_len;
- if (!(chip->flags & EE_READONLY)) {
- at25->bin.write = at25_bin_write;
- at25->bin.attr.mode |= S_IWUSR;
- }
-
- err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
- if (err)
- goto fail;
-
- dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
- (at25->bin.size < 1024)
- ? at25->bin.size
- : (at25->bin.size / 1024),
- (at25->bin.size < 1024) ? "Byte" : "KByte",
- at25->chip.name,
- (chip->flags & EE_READONLY) ? " (readonly)" : "",
- at25->chip.page_size);
- return 0;
-fail:
- dev_dbg(&spi->dev, "probe err %d\n", err);
- kfree(at25);
- return err;
-}
-
-static int __devexit at25_remove(struct spi_device *spi)
-{
- struct at25_data *at25;
-
- at25 = dev_get_drvdata(&spi->dev);
- sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
- kfree(at25);
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct spi_driver at25_driver = {
- .driver = {
- .name = "at25",
- .owner = THIS_MODULE,
- },
- .probe = at25_probe,
- .remove = __devexit_p(at25_remove),
-};
-
-static int __init at25_init(void)
-{
- return spi_register_driver(&at25_driver);
-}
-module_init(at25_init);
-
-static void __exit at25_exit(void)
-{
- spi_unregister_driver(&at25_driver);
-}
-module_exit(at25_exit);
-
-MODULE_DESCRIPTION("Driver for most SPI EEPROMs");
-MODULE_AUTHOR("David Brownell");
-MODULE_LICENSE("GPL");
-
obj-$(CONFIG_USB_ISP116X_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
+obj-$(CONFIG_USB_FHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+ { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
{ 0, 0 }
};
.release = usbdev_release,
};
-void usb_fs_classdev_common_remove(struct usb_device *udev)
+static void usbdev_remove(struct usb_device *udev)
{
struct dev_state *ps;
struct siginfo sinfo;
{
if (dev->usb_classdev)
device_unregister(dev->usb_classdev);
- usb_fs_classdev_common_remove(dev);
}
-static int usb_classdev_notify(struct notifier_block *self,
+#else
+#define usb_classdev_add(dev) 0
+#define usb_classdev_remove(dev) do {} while (0)
+
+#endif
+
+static int usbdev_notify(struct notifier_block *self,
unsigned long action, void *dev)
{
switch (action) {
break;
case USB_DEVICE_REMOVE:
usb_classdev_remove(dev);
+ usbdev_remove(dev);
break;
}
return NOTIFY_OK;
}
static struct notifier_block usbdev_nb = {
- .notifier_call = usb_classdev_notify,
+ .notifier_call = usbdev_notify,
};
-#endif
static struct cdev usb_device_cdev;
* to /sys/dev
*/
usb_classdev_class->dev_kobj = NULL;
-
- usb_register_notify(&usbdev_nb);
#endif
+ usb_register_notify(&usbdev_nb);
out:
return retval;
void usb_devio_cleanup(void)
{
-#ifdef CONFIG_USB_DEVICE_CLASS
usb_unregister_notify(&usbdev_nb);
+#ifdef CONFIG_USB_DEVICE_CLASS
class_destroy(usb_classdev_class);
#endif
cdev_del(&usb_device_cdev);
* supports "soft" unbinding.
*/
if (!driver->soft_unbind)
- usb_disable_interface(udev, intf);
+ usb_disable_interface(udev, intf, false);
driver->disconnect(intf);
usb_cancel_queued_reset(intf);
}
pci_set_master(dev);
- device_set_wakeup_enable(&dev->dev, 1);
retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
int wake, w;
+ int has_pci_pm;
/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
synchronize_irq(dev->irq);
+ /* Downstream ports from this root hub should already be quiesced, so
+ * there will be no DMA activity. Now we can shut down the upstream
+ * link (except maybe for PME# resume signaling) and enter some PCI
+ * low power state, if the hardware allows.
+ */
+ pci_disable_device(dev);
+
+ pci_save_state(dev);
+
/* Don't fail on error to enable wakeup. We rely on pci code
* to reject requests the hardware can't implement, rather
* than coding the same thing.
wake = w;
dev_dbg(&dev->dev, "wakeup: %d\n", wake);
- /* Downstream ports from this root hub should already be quiesced, so
- * there will be no DMA activity. Now we can shut down the upstream
- * link (except maybe for PME# resume signaling) and enter some PCI
- * low power state, if the hardware allows.
- */
- pci_disable_device(dev);
- done:
- return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
- int retval = 0;
- int has_pci_pm;
-
- /* We might already be suspended (runtime PM -- not yet written) */
- if (dev->current_state != PCI_D0)
- goto done;
-
- pci_save_state(dev);
-
/* Don't change state if we don't need to */
if (message.event == PM_EVENT_FREEZE ||
message.event == PM_EVENT_PRETHAW) {
done:
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
/**
* usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
*/
int usb_hcd_pci_resume_early(struct pci_dev *dev)
{
- int retval = 0;
- pci_power_t state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
-
- /* NOTE: chip docs cover clean "real suspend" cases (what Linux
- * calls "standby", "suspend to RAM", and so on). There are also
- * dirty cases when swsusp fakes a suspend in "shutdown" mode.
- */
- if (state != PCI_D0) {
-#ifdef DEBUG
- int pci_pm;
- u16 pmcr;
-
- pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
- pmcr &= PCI_PM_CTRL_STATE_MASK;
- if (pmcr) {
- /* Clean case: power to USB and to HC registers was
- * maintained; remote wakeup is easy.
- */
- dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
- } else {
- /* Clean: HC lost Vcc power, D0 uninitialized
- * + Vaux may have preserved port and transceiver
- * state ... for remote wakeup from D3cold
- * + or not; HCD must reinit + re-enumerate
- *
- * Dirty: D0 semi-initialized cases with swsusp
- * + after BIOS init
- * + after Linux init (HCD statically linked)
- */
- dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
- state);
- }
-#endif
-
- retval = pci_set_power_state(dev, PCI_D0);
- } else {
- /* Same basic cases: clean (powered/not), dirty */
- dev_dbg(&dev->dev, "PCI legacy resume\n");
- }
-
- if (retval < 0)
- dev_err(&dev->dev, "can't resume: %d\n", retval);
- else
- pci_restore_state(dev);
-
- return retval;
+ pci_restore_state(dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
struct usb_hcd *hcd;
int retval;
+#ifdef CONFIG_PPC_PMAC
+ /* Reenable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, 1);
+ }
+#endif
+
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
return 0;
}
+ pci_enable_wake(dev, PCI_D0, false);
+
retval = pci_enable_device(dev);
if (retval < 0) {
dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
void usb_ep0_reinit(struct usb_device *udev)
{
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+ usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
usb_enable_endpoint(udev, &udev->ep0, true);
}
EXPORT_SYMBOL_GPL(usb_ep0_reinit);
fs_remove_file (dev->usbfs_dentry);
dev->usbfs_dentry = NULL;
}
- usb_fs_classdev_common_remove(dev);
}
static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
* @dev: the device whose endpoint is being disabled
* @epaddr: the endpoint's address. Endpoint number for output,
* endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ * controller hardware
*
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
*/
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+ bool reset_hardware)
{
unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
struct usb_host_endpoint *ep;
if (usb_endpoint_out(epaddr)) {
ep = dev->ep_out[epnum];
- dev->ep_out[epnum] = NULL;
+ if (reset_hardware)
+ dev->ep_out[epnum] = NULL;
} else {
ep = dev->ep_in[epnum];
- dev->ep_in[epnum] = NULL;
+ if (reset_hardware)
+ dev->ep_in[epnum] = NULL;
}
if (ep) {
ep->enabled = 0;
usb_hcd_flush_endpoint(dev, ep);
- usb_hcd_disable_endpoint(dev, ep);
+ if (reset_hardware)
+ usb_hcd_disable_endpoint(dev, ep);
}
}
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
* @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ * controller hardware
*
* Disables all the endpoints for the interface's current altsetting.
*/
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+ bool reset_hardware)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
usb_disable_endpoint(dev,
- alt->endpoint[i].desc.bEndpointAddress);
+ alt->endpoint[i].desc.bEndpointAddress,
+ reset_hardware);
}
}
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
skip_ep0 ? "non-ep0" : "all");
for (i = skip_ep0; i < 16; ++i) {
- usb_disable_endpoint(dev, i);
- usb_disable_endpoint(dev, i + USB_DIR_IN);
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
dev->toggle[0] = dev->toggle[1] = 0;
remove_intf_ep_devs(iface);
usb_remove_sysfs_intf_files(iface);
}
- usb_disable_interface(dev, iface);
+ usb_disable_interface(dev, iface, true);
iface->cur_altsetting = alt;
*/
for (i = 1; i < 16; ++i) {
- usb_disable_endpoint(dev, i);
- usb_disable_endpoint(dev, i + USB_DIR_IN);
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
config = dev->actconfig;
struct usb_host_endpoint *ep, bool reset_toggle);
extern void usb_enable_interface(struct usb_device *dev,
struct usb_interface *intf, bool reset_toggles);
-extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+ bool reset_hardware);
extern void usb_disable_interface(struct usb_device *dev,
- struct usb_interface *intf);
+ struct usb_interface *intf, bool reset_hardware);
extern void usb_release_interface_cache(struct kref *ref);
extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
extern int usb_deauthorize_device(struct usb_device *);
extern const struct file_operations usbfs_devices_fops;
extern const struct file_operations usbdev_file_operations;
extern void usbfs_conn_disc_event(void);
-extern void usb_fs_classdev_common_remove(struct usb_device *udev);
extern int usb_devio_init(void);
extern void usb_devio_cleanup(void);
struct usb_request *req = cdev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u8 intf = w_index & 0xFF;
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
struct usb_function *f = NULL;
goto unknown;
if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
break;
- f = cdev->config->interface[w_index];
+ f = cdev->config->interface[intf];
if (!f)
break;
- if (w_value && !f->get_alt)
+ if (w_value && !f->set_alt)
break;
value = f->set_alt(f, w_index, w_value);
break;
goto unknown;
if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
break;
- f = cdev->config->interface[w_index];
+ f = cdev->config->interface[intf];
if (!f)
break;
/* lots of interfaces only need altsetting zero... */
*/
if ((ctrl->bRequestType & USB_RECIP_MASK)
== USB_RECIP_INTERFACE) {
- f = cdev->config->interface[w_index];
+ f = cdev->config->interface[intf];
if (f && f->setup)
value = f->setup(f, ctrl);
else
for (i = 0; i < 100; i ++) {
temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
- if (!temp & EPSTAT_STALL)
+ if (!(temp & EPSTAT_STALL))
break;
udelay(20);
}
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ select USB_OTG_UTILS if ARCH_OMAP
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
To compile this driver as a module, choose M here: the
module will be called uhci-hcd.
+config USB_FHCI_HCD
+ tristate "Freescale QE USB Host Controller support"
+ depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+ select FSL_GTM
+ select QE_USB
+ help
+ This driver enables support for Freescale QE USB Host Controller
+ (as found on MPC8360 and MPC8323 processors), the driver supports
+ Full and Low Speed USB.
+
+config FHCI_DEBUG
+ bool "Freescale QE USB Host Controller debug support"
+ depends on USB_FHCI_HCD && DEBUG_FS
+ help
+ Say "y" to see some FHCI debug information and statistics
+ throught debugfs.
+
config USB_U132_HCD
tristate "Elan U132 Adapter Host Controller"
depends on USB && USB_FTDI_ELAN
endif
isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+ fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
obj-$(CONFIG_USB_WHCI_HCD) += whci/
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
pci_read_config_word(pdev, 0x62, &port_wake);
if (port_wake & 0x0001) {
dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
- device_init_wakeup(&pdev->dev, 1);
+ device_set_wakeup_capable(&pdev->dev, 1);
}
}
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+ int i;
+
+ if (usb_er == -1) {
+ fhci->usb_irq_stat[12]++;
+ return;
+ }
+
+ for (i = 0; i < 12; ++i) {
+ if (usb_er & (1 << i))
+ fhci->usb_irq_stat[i]++;
+ }
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+ struct fhci_hcd *fhci = s->private;
+ struct fhci_regs __iomem *regs = fhci->regs;
+
+ seq_printf(s,
+ "mode: 0x%x\n" "addr: 0x%x\n"
+ "command: 0x%x\n" "ep0: 0x%x\n"
+ "event: 0x%x\n" "mask: 0x%x\n"
+ "status: 0x%x\n" "SOF timer: %d\n"
+ "frame number: %d\n"
+ "lines status: 0x%x\n",
+ in_8(®s->usb_mod), in_8(®s->usb_addr),
+ in_8(®s->usb_comm), in_be16(®s->usb_ep[0]),
+ in_be16(®s->usb_event), in_be16(®s->usb_mask),
+ in_8(®s->usb_status), in_be16(®s->usb_sof_tmr),
+ in_be16(®s->usb_frame_num),
+ fhci_ioports_check_bus_state(fhci));
+
+ return 0;
+}
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+ struct fhci_hcd *fhci = s->private;
+ int *usb_irq_stat = fhci->usb_irq_stat;
+
+ seq_printf(s,
+ "RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+ "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+ "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+ "RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+ "IDLE_ONLY: %d\n",
+ usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+ usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+ usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+ usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+ usb_irq_stat[12]);
+
+ return 0;
+}
+
+static int fhci_dfs_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fhci_dfs_regs_show, inode->i_private);
+}
+
+static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fhci_dfs_irq_stat_show, inode->i_private);
+}
+
+static const struct file_operations fhci_dfs_regs_fops = {
+ .open = fhci_dfs_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations fhci_dfs_irq_stat_fops = {
+ .open = fhci_dfs_irq_stat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+ struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+ fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+ if (!fhci->dfs_root) {
+ WARN_ON(1);
+ return;
+ }
+
+ fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO,
+ fhci->dfs_root, fhci, &fhci_dfs_regs_fops);
+
+ fhci->dfs_irq_stat = debugfs_create_file("irq_stat",
+ S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+ &fhci_dfs_irq_stat_fops);
+
+ WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+ if (!fhci->dfs_root)
+ return;
+
+ if (fhci->dfs_irq_stat)
+ debugfs_remove(fhci->dfs_irq_stat);
+
+ if (fhci->dfs_regs)
+ debugfs_remove(fhci->dfs_regs);
+
+ debugfs_remove(fhci->dfs_root);
+}
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ /* clear frame_n */
+ out_be16(&fhci->pram->frame_num, 0);
+
+ out_be16(&fhci->regs->usb_sof_tmr, 0);
+ setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+ gtm_stop_timer16(fhci->timer);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+ return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+ enum fhci_mem_alloc data_mem,
+ u32 ring_len)
+{
+ u32 rc;
+
+ rc = fhci_create_ep(usb, data_mem, ring_len);
+ if (rc)
+ return rc;
+
+ /* inilialize endpoint registers */
+ fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+ return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (usb->intr_nesting_cnt == 1) {
+ /* initialize the USB interrupt */
+ enable_irq(fhci_to_hcd(fhci)->irq);
+
+ /* initialize the event register and mask register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+ /* enable the timer interrupts */
+ enable_irq(fhci->timer->irq);
+ } else if (usb->intr_nesting_cnt > 1)
+ fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+ usb->intr_nesting_cnt--;
+}
+
+/* diable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (usb->intr_nesting_cnt == 0) {
+ /* diable the timer interrupt */
+ disable_irq_nosync(fhci->timer->irq);
+
+ /* disable the usb interrupt */
+ disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+ out_be16(&usb->fhci->regs->usb_mask, 0);
+ }
+ usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+ setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+ mdelay(100);
+
+ return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ fhci_usb_disable_interrupt(usb);
+ fhci_port_disable(fhci);
+
+ /* disable the usb controller */
+ if (usb->port_status == FHCI_PORT_FULL ||
+ usb->port_status == FHCI_PORT_LOW)
+ fhci_device_disconnected_interrupt(fhci);
+
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+ return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+ u8 bits = 0;
+
+ /* check USBOE,if transmitting,exit */
+ if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+ return -1;
+
+ /* check USBRP */
+ if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+ bits |= 0x2;
+
+ /* check USBRN */
+ if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+ bits |= 0x1;
+
+ return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+ struct ed *ed;
+ struct ed *next_ed;
+ struct td *td;
+ struct td *next_td;
+
+ list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+ list_del(&ed->node);
+ kfree(ed);
+ }
+
+ list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+ list_del(&td->node);
+ kfree(td);
+ }
+
+ kfree(fhci->vroot_hub);
+ fhci->vroot_hub = NULL;
+
+ kfree(fhci->hc_list);
+ fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+ int i;
+
+ fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+ if (!fhci->hc_list)
+ goto err;
+
+ INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+ INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+ INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+ INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+ INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+ fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+ if (!fhci->vroot_hub)
+ goto err;
+
+ INIT_LIST_HEAD(&fhci->empty_eds);
+ INIT_LIST_HEAD(&fhci->empty_tds);
+
+ /* initialize work queue to handle done list */
+ fhci_tasklet.data = (unsigned long)fhci;
+ fhci->process_done_task = &fhci_tasklet;
+
+ for (i = 0; i < MAX_TDS; i++) {
+ struct td *td;
+
+ td = kmalloc(sizeof(*td), GFP_KERNEL);
+ if (!td)
+ goto err;
+ fhci_recycle_empty_td(fhci, td);
+ }
+ for (i = 0; i < MAX_EDS; i++) {
+ struct ed *ed;
+
+ ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+ if (!ed)
+ goto err;
+ fhci_recycle_empty_ed(fhci, ed);
+ }
+
+ fhci->active_urbs = 0;
+ return 0;
+err:
+ fhci_mem_free(fhci);
+ return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+ struct fhci_usb *usb = lld;
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (usb) {
+ fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+ fhci_ep0_free(usb);
+ kfree(usb->actual_frame);
+ kfree(usb);
+ }
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+ usb->port_status = FHCI_PORT_DISABLED;
+ usb->max_frame_usage = FRAME_TIME_USAGE;
+ usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+ usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+ if (!usb->actual_frame) {
+ fhci_usb_free(usb);
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+ /* initializing registers on chip, clear frame number */
+ out_be16(&fhci->pram->frame_num, 0);
+
+ /* clear rx state */
+ out_be32(&fhci->pram->rx_state, 0);
+
+ /* set mask register */
+ usb->saved_msk = (USB_E_TXB_MASK |
+ USB_E_TXE1_MASK |
+ USB_E_IDLE_MASK |
+ USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+ out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN);
+
+ /* clearing the mask register */
+ out_be16(&usb->fhci->regs->usb_mask, 0);
+
+ /* initialing the event register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+
+ if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+ fhci_usb_free(usb);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb;
+
+ /* allocate memory for SCC data structure */
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb) {
+ fhci_err(fhci, "no memory for SCC data struct\n");
+ return NULL;
+ }
+
+ usb->fhci = fhci;
+ usb->hc_list = fhci->hc_list;
+ usb->vroot_hub = fhci->vroot_hub;
+
+ usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+ return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+ int ret;
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+ ret = fhci_mem_init(fhci);
+ if (ret) {
+ fhci_err(fhci, "failed to allocate memory\n");
+ goto err;
+ }
+
+ fhci->usb_lld = fhci_create_lld(fhci);
+ if (!fhci->usb_lld) {
+ fhci_err(fhci, "low level driver config failed\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = fhci_usb_init(fhci);
+ if (ret) {
+ fhci_err(fhci, "low level driver initialize failed\n");
+ goto err;
+ }
+
+ spin_lock_init(&fhci->lock);
+
+ /* connect the virtual root hub */
+ fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */
+ fhci->vroot_hub->hub.wHubStatus = 0;
+ fhci->vroot_hub->hub.wHubChange = 0;
+ fhci->vroot_hub->port.wPortStatus = 0;
+ fhci->vroot_hub->port.wPortChange = 0;
+
+ hcd->state = HC_STATE_RUNNING;
+
+ /*
+ * From here on, khubd concurrently accesses the root
+ * hub; drivers will be talking to enumerated devices.
+ * (On restart paths, khubd already knows about the root
+ * hub and could find work as soon as we wrote FLAG_CF.)
+ *
+ * Before this point the HC was idle/ready. After, khubd
+ * and device drivers may start it running.
+ */
+ fhci_usb_enable(fhci);
+ return 0;
+err:
+ fhci_mem_free(fhci);
+ return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+ fhci_usb_disable_interrupt(fhci->usb_lld);
+ fhci_usb_disable(fhci);
+
+ fhci_usb_free(fhci->usb_lld);
+ fhci->usb_lld = NULL;
+ fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ u32 pipe = urb->pipe;
+ int ret;
+ int i;
+ int size = 0;
+ struct urb_priv *urb_priv;
+ unsigned long flags;
+
+ switch (usb_pipetype(pipe)) {
+ case PIPE_CONTROL:
+ /* 1 td fro setup,1 for ack */
+ size = 2;
+ case PIPE_BULK:
+ /* one td for every 4096 bytes(can be upto 8k) */
+ size += urb->transfer_buffer_length / 4096;
+ /* ...add for any remaining bytes... */
+ if ((urb->transfer_buffer_length % 4096) != 0)
+ size++;
+ /* ..and maybe a zero length packet to wrap it up */
+ if (size == 0)
+ size++;
+ else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+ && (urb->transfer_buffer_length
+ % usb_maxpacket(urb->dev, pipe,
+ usb_pipeout(pipe))) != 0)
+ size++;
+ break;
+ case PIPE_ISOCHRONOUS:
+ size = urb->number_of_packets;
+ if (size <= 0)
+ return -EINVAL;
+ for (i = 0; i < urb->number_of_packets; i++) {
+ urb->iso_frame_desc[i].actual_length = 0;
+ urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+ }
+ break;
+ case PIPE_INTERRUPT:
+ size = 1;
+ }
+
+ /* allocate the private part of the URB */
+ urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+
+ /* allocate the private part of the URB */
+ urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+ if (!urb_priv->tds) {
+ kfree(urb_priv);
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto err;
+
+ /* fill the private part of the URB */
+ urb_priv->num_of_tds = size;
+
+ urb->status = -EINPROGRESS;
+ urb->actual_length = 0;
+ urb->error_count = 0;
+ urb->hcpriv = urb_priv;
+
+ fhci_queue_urb(fhci, urb);
+err:
+ if (ret) {
+ kfree(urb_priv->tds);
+ kfree(urb_priv);
+ }
+ spin_unlock_irqrestore(&fhci->lock, flags);
+ return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ struct fhci_usb *usb = fhci->usb_lld;
+ int ret = -EINVAL;
+ unsigned long flags;
+
+ if (!urb || !urb->dev || !urb->dev->bus)
+ goto out;
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret)
+ goto out2;
+
+ if (usb->port_status != FHCI_PORT_DISABLED) {
+ struct urb_priv *urb_priv;
+
+ /*
+ * flag the urb's data for deletion in some upcoming
+ * SF interrupt's delete list processing
+ */
+ urb_priv = urb->hcpriv;
+
+ if (!urb_priv || (urb_priv->state == URB_DEL))
+ goto out2;
+
+ urb_priv->state = URB_DEL;
+
+ /* already pending? */
+ urb_priv->ed->state = FHCI_ED_URB_DEL;
+ } else {
+ fhci_urb_complete_free(fhci, urb);
+ }
+
+out2:
+ spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+ return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct fhci_hcd *fhci;
+ struct ed *ed;
+ unsigned long flags;
+
+ fhci = hcd_to_fhci(hcd);
+ spin_lock_irqsave(&fhci->lock, flags);
+ ed = ep->hcpriv;
+ if (ed) {
+ while (ed->td_head != NULL) {
+ struct td *td = fhci_remove_td_from_ed(ed);
+ fhci_urb_complete_free(fhci, td->urb);
+ }
+ fhci_recycle_empty_ed(fhci, ed);
+ ep->hcpriv = NULL;
+ }
+ spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+ return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+ .description = "fsl,usb-fhci",
+ .product_desc = "FHCI HOST Controller",
+ .hcd_priv_size = sizeof(struct fhci_hcd),
+
+ /* generic hardware linkage */
+ .irq = fhci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /* basic lifecycle operation */
+ .start = fhci_start,
+ .stop = fhci_stop,
+
+ /* managing i/o requests and associated device resources */
+ .urb_enqueue = fhci_urb_enqueue,
+ .urb_dequeue = fhci_urb_dequeue,
+ .endpoint_disable = fhci_endpoint_disable,
+
+ /* scheduling support */
+ .get_frame_number = fhci_get_frame_number,
+
+ /* root hub support */
+ .hub_status_data = fhci_hub_status_data,
+ .hub_control = fhci_hub_control,
+};
+
+static int __devinit of_fhci_probe(struct of_device *ofdev,
+ const struct of_device_id *ofid)
+{
+ struct device *dev = &ofdev->dev;
+ struct device_node *node = ofdev->node;
+ struct usb_hcd *hcd;
+ struct fhci_hcd *fhci;
+ struct resource usb_regs;
+ unsigned long pram_addr;
+ unsigned int usb_irq;
+ const char *sprop;
+ const u32 *iprop;
+ int size;
+ int ret;
+ int i;
+ int j;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ sprop = of_get_property(node, "mode", NULL);
+ if (sprop && strcmp(sprop, "host"))
+ return -ENODEV;
+
+ hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+ if (!hcd) {
+ dev_err(dev, "could not create hcd\n");
+ return -ENOMEM;
+ }
+
+ fhci = hcd_to_fhci(hcd);
+ hcd->self.controller = dev;
+ dev_set_drvdata(dev, hcd);
+
+ iprop = of_get_property(node, "hub-power-budget", &size);
+ if (iprop && size == sizeof(*iprop))
+ hcd->power_budget = *iprop;
+
+ /* FHCI registers. */
+ ret = of_address_to_resource(node, 0, &usb_regs);
+ if (ret) {
+ dev_err(dev, "could not get regs\n");
+ goto err_regs;
+ }
+
+ hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1);
+ if (!hcd->regs) {
+ dev_err(dev, "could not ioremap regs\n");
+ ret = -ENOMEM;
+ goto err_regs;
+ }
+ fhci->regs = hcd->regs;
+
+ /* Parameter RAM. */
+ iprop = of_get_property(node, "reg", &size);
+ if (!iprop || size < sizeof(*iprop) * 4) {
+ dev_err(dev, "can't get pram offset\n");
+ ret = -EINVAL;
+ goto err_pram;
+ }
+
+ pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+ if (IS_ERR_VALUE(pram_addr)) {
+ dev_err(dev, "failed to allocate usb pram\n");
+ ret = -ENOMEM;
+ goto err_pram;
+ }
+ fhci->pram = cpm_muram_addr(pram_addr);
+
+ /* GPIOs and pins */
+ for (i = 0; i < NUM_GPIOS; i++) {
+ int gpio;
+ enum of_gpio_flags flags;
+
+ gpio = of_get_gpio_flags(node, i, &flags);
+ fhci->gpios[i] = gpio;
+ fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+ if (!gpio_is_valid(gpio)) {
+ if (i < GPIO_SPEED) {
+ dev_err(dev, "incorrect GPIO%d: %d\n",
+ i, gpio);
+ goto err_gpios;
+ } else {
+ dev_info(dev, "assuming board doesn't have "
+ "%s gpio\n", i == GPIO_SPEED ?
+ "speed" : "power");
+ continue;
+ }
+ }
+
+ ret = gpio_request(gpio, dev->bus_id);
+ if (ret) {
+ dev_err(dev, "failed to request gpio %d", i);
+ goto err_gpios;
+ }
+
+ if (i >= GPIO_SPEED) {
+ ret = gpio_direction_output(gpio, 0);
+ if (ret) {
+ dev_err(dev, "failed to set gpio %d as "
+ "an output\n", i);
+ i++;
+ goto err_gpios;
+ }
+ }
+ }
+
+ for (j = 0; j < NUM_PINS; j++) {
+ fhci->pins[j] = qe_pin_request(ofdev->node, j);
+ if (IS_ERR(fhci->pins[j])) {
+ ret = PTR_ERR(fhci->pins[j]);
+ dev_err(dev, "can't get pin %d: %d\n", j, ret);
+ goto err_pins;
+ }
+ }
+
+ /* Frame limit timer and its interrupt. */
+ fhci->timer = gtm_get_timer16();
+ if (IS_ERR(fhci->timer)) {
+ ret = PTR_ERR(fhci->timer);
+ dev_err(dev, "failed to request qe timer: %i", ret);
+ goto err_get_timer;
+ }
+
+ ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+ IRQF_DISABLED, "qe timer (usb)", hcd);
+ if (ret) {
+ dev_err(dev, "failed to request timer irq");
+ goto err_timer_irq;
+ }
+
+ /* USB Host interrupt. */
+ usb_irq = irq_of_parse_and_map(node, 0);
+ if (usb_irq == NO_IRQ) {
+ dev_err(dev, "could not get usb irq\n");
+ ret = -EINVAL;
+ goto err_usb_irq;
+ }
+
+ /* Clocks. */
+ sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+ if (sprop) {
+ fhci->fullspeed_clk = qe_clock_source(sprop);
+ if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+ dev_err(dev, "wrong fullspeed-clock\n");
+ ret = -EINVAL;
+ goto err_clocks;
+ }
+ }
+
+ sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+ if (sprop) {
+ fhci->lowspeed_clk = qe_clock_source(sprop);
+ if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+ dev_err(dev, "wrong lowspeed-clock\n");
+ ret = -EINVAL;
+ goto err_clocks;
+ }
+ }
+
+ if (fhci->fullspeed_clk == QE_CLK_NONE &&
+ fhci->lowspeed_clk == QE_CLK_NONE) {
+ dev_err(dev, "no clocks specified\n");
+ ret = -EINVAL;
+ goto err_clocks;
+ }
+
+ dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+ fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+ /* Start with full-speed, if possible. */
+ if (fhci->fullspeed_clk != QE_CLK_NONE) {
+ fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+ qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+ } else {
+ fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+ qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+ }
+
+ /* Clear and disable any pending interrupts. */
+ out_be16(&fhci->regs->usb_event, 0xffff);
+ out_be16(&fhci->regs->usb_mask, 0);
+
+ ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+ if (ret < 0)
+ goto err_add_hcd;
+
+ fhci_dfs_create(fhci);
+
+ return 0;
+
+err_add_hcd:
+err_clocks:
+ irq_dispose_mapping(usb_irq);
+err_usb_irq:
+ free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+ gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+ while (--j >= 0)
+ qe_pin_free(fhci->pins[j]);
+err_gpios:
+ while (--i >= 0) {
+ if (gpio_is_valid(fhci->gpios[i]))
+ gpio_free(fhci->gpios[i]);
+ }
+ cpm_muram_free(pram_addr);
+err_pram:
+ iounmap(hcd->regs);
+err_regs:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int __devexit fhci_remove(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ int i;
+ int j;
+
+ usb_remove_hcd(hcd);
+ free_irq(fhci->timer->irq, hcd);
+ gtm_put_timer16(fhci->timer);
+ cpm_muram_free(cpm_muram_offset(fhci->pram));
+ for (i = 0; i < NUM_GPIOS; i++) {
+ if (!gpio_is_valid(fhci->gpios[i]))
+ continue;
+ gpio_free(fhci->gpios[i]);
+ }
+ for (j = 0; j < NUM_PINS; j++)
+ qe_pin_free(fhci->pins[j]);
+ fhci_dfs_destroy(fhci);
+ usb_put_hcd(hcd);
+ return 0;
+}
+
+static int __devexit of_fhci_remove(struct of_device *ofdev)
+{
+ return fhci_remove(&ofdev->dev);
+}
+
+static struct of_device_id of_fhci_match[] = {
+ { .compatible = "fsl,mpc8323-qe-usb", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct of_platform_driver of_fhci_driver = {
+ .name = "fsl,usb-fhci",
+ .match_table = of_fhci_match,
+ .probe = of_fhci_probe,
+ .remove = __devexit_p(of_fhci_remove),
+};
+
+static int __init fhci_module_init(void)
+{
+ return of_register_platform_driver(&of_fhci_driver);
+}
+module_init(fhci_module_init);
+
+static void __exit fhci_module_exit(void)
+{
+ of_unregister_platform_driver(&of_fhci_driver);
+}
+module_exit(fhci_module_exit);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+ "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+ "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+ 0x09, /* blength */
+ 0x29, /* bDescriptorType;hub-descriptor */
+ 0x01, /* bNbrPorts */
+ 0x00, /* wHubCharacteristics */
+ 0x00,
+ 0x01, /* bPwrOn2pwrGood;2ms */
+ 0x00, /* bHubContrCurrent;0mA */
+ 0x00, /* DeviceRemoveable */
+ 0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+ int gpio = fhci->gpios[gpio_nr];
+ bool alow = fhci->alow_gpios[gpio_nr];
+
+ if (!gpio_is_valid(gpio))
+ return;
+
+ gpio_set_value(gpio, on ^ alow);
+ mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+ enum fhci_port_status status)
+{
+ fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+ switch (status) {
+ case FHCI_PORT_POWER_OFF:
+ fhci_gpio_set_value(fhci, GPIO_POWER, false);
+ break;
+ case FHCI_PORT_DISABLED:
+ case FHCI_PORT_WAITING:
+ fhci_gpio_set_value(fhci, GPIO_POWER, true);
+ break;
+ case FHCI_PORT_LOW:
+ fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+ break;
+ case FHCI_PORT_FULL:
+ fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+ enum fhci_port_status port_status;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_stop_sof_timer(fhci);
+
+ fhci_flush_all_transmissions(usb);
+
+ fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+ port_status = usb->port_status;
+ usb->port_status = FHCI_PORT_DISABLED;
+
+ /* Enable IDLE since we want to know if something comes along */
+ usb->saved_msk |= USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+ /* check if during the disconnection process attached new device */
+ if (port_status == FHCI_PORT_WAITING)
+ fhci_device_connected_interrupt(fhci);
+ usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+ usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+ fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+ struct fhci_usb *usb = (struct fhci_usb *)lld;
+ struct fhci_hcd *fhci = usb->fhci;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_config_transceiver(fhci, usb->port_status);
+
+ if ((usb->port_status != FHCI_PORT_FULL) &&
+ (usb->port_status != FHCI_PORT_LOW))
+ fhci_start_sof_timer(fhci);
+
+ usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+ usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
+ gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
+ gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+
+ mdelay(5);
+
+ qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+ qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+ qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+ struct fhci_usb *usb = (struct fhci_usb *)lld;
+ struct fhci_hcd *fhci = usb->fhci;
+ u8 mode;
+ u16 mask;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_stop_sof_timer(fhci);
+ /* disable the USB controller */
+ mode = in_8(&fhci->regs->usb_mod);
+ out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
+
+ /* disable idle interrupts */
+ mask = in_be16(&fhci->regs->usb_mask);
+ out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
+
+ fhci_io_port_generate_reset(fhci);
+
+ /* enable interrupt on this endpoint */
+ out_be16(&fhci->regs->usb_mask, mask);
+
+ /* enable the USB controller */
+ mode = in_8(&fhci->regs->usb_mod);
+ out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
+ fhci_start_sof_timer(fhci);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ int ret = 0;
+ unsigned long flags;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+ USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+ USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+ *buf = 1 << 1;
+ ret = 1;
+ fhci_dbg(fhci, "-- %s\n", __func__);
+ }
+
+ spin_unlock_irqrestore(&fhci->lock, flags);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+
+ return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ int retval = 0;
+ int len = 0;
+ struct usb_hub_status *hub_status;
+ struct usb_port_status *port_status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ fhci->vroot_hub->feature &= (1 << wValue);
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_ENABLE;
+ fhci_port_disable(fhci);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_ENABLE;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_SUSPEND;
+ fhci_stop_sof_timer(fhci);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_SUSPEND;
+ break;
+ case USB_PORT_FEAT_POWER:
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_POWER;
+ fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_CONNECTION;
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_OVERCURRENT;
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ fhci->vroot_hub->port.wPortChange &=
+ ~USB_PORT_STAT_C_RESET;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case GetHubDescriptor:
+ memcpy(buf, root_hub_des, sizeof(root_hub_des));
+ buf[3] = 0x11; /* per-port power, no ovrcrnt */
+ len = (buf[0] < wLength) ? buf[0] : wLength;
+ break;
+ case GetHubStatus:
+ hub_status = (struct usb_hub_status *)buf;
+ hub_status->wHubStatus =
+ cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+ hub_status->wHubChange =
+ cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+ len = 4;
+ break;
+ case GetPortStatus:
+ port_status = (struct usb_port_status *)buf;
+ port_status->wPortStatus =
+ cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+ port_status->wPortChange =
+ cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+ len = 4;
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ fhci->vroot_hub->feature |= (1 << wValue);
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_ENABLE;
+ fhci_port_enable(fhci->usb_lld);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_SUSPEND;
+ fhci_stop_sof_timer(fhci);
+ break;
+ case USB_PORT_FEAT_RESET:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_RESET;
+ fhci_port_reset(fhci->usb_lld);
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_ENABLE;
+ fhci->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_RESET;
+ break;
+ case USB_PORT_FEAT_POWER:
+ fhci->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_POWER;
+ fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+ break;
+ default:
+ goto error;
+ }
+ break;
+ default:
+error:
+ retval = -EPIPE;
+ }
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+
+ spin_unlock_irqrestore(&fhci->lock, flags);
+
+ return retval;
+}
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+ memset(td, 0, sizeof(*td));
+ INIT_LIST_HEAD(&td->node);
+ INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+ memset(ed, 0, sizeof(*ed));
+ INIT_LIST_HEAD(&ed->td_list);
+ INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+ struct td *td;
+
+ if (!list_empty(&fhci->empty_tds)) {
+ td = list_entry(fhci->empty_tds.next, struct td, node);
+ list_del(fhci->empty_tds.next);
+ } else {
+ td = kmalloc(sizeof(*td), GFP_ATOMIC);
+ if (!td)
+ fhci_err(fhci, "No memory to allocate to TD\n");
+ else
+ init_td(td);
+ }
+
+ return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+ init_td(td);
+ list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+ struct ed *ed;
+
+ if (!list_empty(&fhci->empty_eds)) {
+ ed = list_entry(fhci->empty_eds.next, struct ed, node);
+ list_del(fhci->empty_eds.next);
+ } else {
+ ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+ if (!ed)
+ fhci_err(fhci, "No memory to allocate to ED\n");
+ else
+ init_ed(ed);
+ }
+
+ return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+ init_ed(ed);
+ list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+ struct urb_priv *urb_priv, struct ed *ed, u16 index,
+ enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+ u16 interval, u16 start_frame, bool ioc)
+{
+ struct td *td = get_empty_td(fhci);
+
+ if (!td)
+ return NULL;
+
+ td->urb = urb;
+ td->ed = ed;
+ td->type = type;
+ td->toggle = toggle;
+ td->data = data;
+ td->len = len;
+ td->iso_index = index;
+ td->interval = interval;
+ td->start_frame = start_frame;
+ td->ioc = ioc;
+ td->status = USB_TD_OK;
+
+ urb_priv->tds[index] = td;
+
+ return td;
+}
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+ if (status == USB_TD_OK)
+ return 0;
+ else if (status & USB_TD_RX_ER_CRC)
+ return -EILSEQ;
+ else if (status & USB_TD_RX_ER_NONOCT)
+ return -EPROTO;
+ else if (status & USB_TD_RX_ER_OVERUN)
+ return -ECOMM;
+ else if (status & USB_TD_RX_ER_BITSTUFF)
+ return -EPROTO;
+ else if (status & USB_TD_RX_ER_PID)
+ return -EILSEQ;
+ else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+ return -ETIMEDOUT;
+ else if (status & USB_TD_TX_ER_STALL)
+ return -EPIPE;
+ else if (status & USB_TD_TX_ER_UNDERUN)
+ return -ENOSR;
+ else if (status & USB_TD_RX_DATA_UNDERUN)
+ return -EREMOTEIO;
+ else if (status & USB_TD_RX_DATA_OVERUN)
+ return -EOVERFLOW;
+ else
+ return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+ list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+ int i;
+
+ for (i = 0; i < number; i++) {
+ struct td *td = td_list[i];
+ list_add_tail(&td->node, &ed->td_list);
+ }
+ if (ed->td_head == NULL)
+ ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+ struct td *td;
+
+ if (!list_empty(&ed->td_list))
+ td = list_entry(ed->td_list.next, struct td, node);
+ else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+ struct td *td;
+
+ if (!list_empty(&frame->tds_list)) {
+ td = list_entry(frame->tds_list.next, struct td, frame_lh);
+ list_del_init(frame->tds_list.next);
+ } else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+ struct td *td;
+
+ if (!list_empty(&frame->tds_list))
+ td = list_entry(frame->tds_list.next, struct td, frame_lh);
+ else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+ struct td *td;
+
+ if (!list_empty(&ed->td_list)) {
+ td = list_entry(ed->td_list.next, struct td, node);
+ list_del_init(ed->td_list.next);
+
+ /* if this TD was the ED's head, find next TD */
+ if (!list_empty(&ed->td_list))
+ ed->td_head = list_entry(ed->td_list.next, struct td,
+ node);
+ else
+ ed->td_head = NULL;
+ } else
+ td = NULL;
+
+ return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+ struct td *td;
+
+ if (!list_empty(&p_list->done_list)) {
+ td = list_entry(p_list->done_list.next, struct td, node);
+ list_del_init(p_list->done_list.next);
+ } else
+ td = NULL;
+
+ return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+ struct td *td;
+
+ td = ed->td_head;
+ list_del_init(&td->node);
+
+ /* If this TD was the ED's head,find next TD */
+ if (!list_empty(&ed->td_list))
+ ed->td_head = list_entry(ed->td_list.next, struct td, node);
+ else {
+ ed->td_head = NULL;
+ ed->state = FHCI_ED_SKIP;
+ }
+ ed->toggle_carry = td->toggle;
+ list_add_tail(&td->node, &usb->hc_list->done_list);
+ if (td->ioc)
+ usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+ int i;
+ struct urb_priv *urb_priv = urb->hcpriv;
+ struct ed *ed = urb_priv->ed;
+
+ for (i = 0; i < urb_priv->num_of_tds; i++) {
+ list_del_init(&urb_priv->tds[i]->node);
+ fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+ }
+
+ /* if this TD was the ED's head,find the next TD */
+ if (!list_empty(&ed->td_list))
+ ed->td_head = list_entry(ed->td_list.next, struct td, node);
+ else
+ ed->td_head = NULL;
+
+ kfree(urb_priv->tds);
+ kfree(urb_priv);
+ urb->hcpriv = NULL;
+
+ /* if this TD was the ED's head,find next TD */
+ if (ed->td_head == NULL)
+ list_del_init(&ed->node);
+ fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+ free_urb_priv(fhci, urb);
+
+ if (urb->status == -EINPROGRESS) {
+ if (urb->actual_length != urb->transfer_buffer_length &&
+ urb->transfer_flags & URB_SHORT_NOT_OK)
+ urb->status = -EREMOTEIO;
+ else
+ urb->status = 0;
+ }
+
+ usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+ spin_unlock(&fhci->lock);
+
+ usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+ spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+ struct ed *ed = td->ed;
+ u32 cc = td->status;
+
+ /* ISO...drivers see per-TD length/status */
+ if (ed->mode == FHCI_TF_ISO) {
+ u32 len;
+ if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+ cc == USB_TD_RX_DATA_UNDERUN))
+ cc = USB_TD_OK;
+
+ if (usb_pipeout(urb->pipe))
+ len = urb->iso_frame_desc[td->iso_index].length;
+ else
+ len = td->actual_len;
+
+ urb->actual_length += len;
+ urb->iso_frame_desc[td->iso_index].actual_length = len;
+ urb->iso_frame_desc[td->iso_index].status =
+ status_to_error(cc);
+ }
+
+ /* BULK,INT,CONTROL... drivers see aggregate length/status,
+ * except that "setup" bytes aren't counted and "short" transfers
+ * might not be reported as errors.
+ */
+ else {
+ if (td->error_cnt >= 3)
+ urb->error_count = 3;
+
+ /* control endpoint only have soft stalls */
+
+ /* update packet status if needed(short may be ok) */
+ if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ cc == USB_TD_RX_DATA_UNDERUN) {
+ ed->state = FHCI_ED_OPER;
+ cc = USB_TD_OK;
+ }
+ if (cc != USB_TD_OK) {
+ if (urb->status == -EINPROGRESS)
+ urb->status = status_to_error(cc);
+ }
+
+ /* count all non-empty packets except control SETUP packet */
+ if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+ urb->actual_length += td->actual_len;
+ }
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+ struct td *td = peek_td_from_ed(ed);
+ struct urb *urb = td->urb;
+ struct urb_priv *urb_priv = urb->hcpriv;
+
+ if (urb_priv->state == URB_DEL) {
+ td = fhci_remove_td_from_ed(ed);
+ /* HC may have partly processed this TD */
+ if (td->status != USB_TD_INPROGRESS)
+ fhci_done_td(urb, td);
+
+ /* URB is done;clean up */
+ if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+ fhci_urb_complete_free(fhci, urb);
+ }
+}
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+ pkt->data = NULL;
+ pkt->len = 0;
+ pkt->status = USB_TD_OK;
+ pkt->info = 0;
+ pkt->priv_data = NULL;
+
+ cq_put(usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+ struct td *td;
+ struct packet *td_pkt;
+ struct ed *ed;
+ u32 trans_len;
+ bool td_done = false;
+
+ td = fhci_remove_td_from_frame(usb->actual_frame);
+ td_pkt = td->pkt;
+ trans_len = pkt->len;
+ td->status = pkt->status;
+ if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+ if ((td->data + td->actual_len) && trans_len)
+ memcpy(td->data + td->actual_len, pkt->data,
+ trans_len);
+ cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+ }
+
+ recycle_frame(usb, pkt);
+
+ ed = td->ed;
+ if (ed->mode == FHCI_TF_ISO) {
+ if (ed->td_list.next->next != &ed->td_list) {
+ struct td *td_next =
+ list_entry(ed->td_list.next->next, struct td,
+ node);
+
+ td_next->start_frame = usb->actual_frame->frame_num;
+ }
+ td->actual_len = trans_len;
+ td_done = true;
+ } else if ((td->status & USB_TD_ERROR) &&
+ !(td->status & USB_TD_TX_ER_NAK)) {
+ /*
+ * There was an error on the transaction (but not NAK).
+ * If it is fatal error (data underrun, stall, bad pid or 3
+ * errors exceeded), mark this TD as done.
+ */
+ if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+ (td->status & USB_TD_TX_ER_STALL) ||
+ (td->status & USB_TD_RX_ER_PID) ||
+ (++td->error_cnt >= 3)) {
+ ed->state = FHCI_ED_HALTED;
+ td_done = true;
+
+ if (td->status & USB_TD_RX_DATA_UNDERUN) {
+ fhci_dbg(usb->fhci, "td err fu\n");
+ td->toggle = !td->toggle;
+ td->actual_len += trans_len;
+ } else {
+ fhci_dbg(usb->fhci, "td err f!u\n");
+ }
+ } else {
+ fhci_dbg(usb->fhci, "td err !f\n");
+ /* it is not a fatal error -retry this transaction */
+ td->nak_cnt = 0;
+ td->error_cnt++;
+ td->status = USB_TD_OK;
+ }
+ } else if (td->status & USB_TD_TX_ER_NAK) {
+ /* there was a NAK response */
+ fhci_vdbg(usb->fhci, "td nack\n");
+ td->nak_cnt++;
+ td->error_cnt = 0;
+ td->status = USB_TD_OK;
+ } else {
+ /* there was no error on transaction */
+ td->error_cnt = 0;
+ td->nak_cnt = 0;
+ td->toggle = !td->toggle;
+ td->actual_len += trans_len;
+
+ if (td->len == td->actual_len)
+ td_done = true;
+ }
+
+ if (td_done)
+ fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are allready scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+ u8 mode;
+ struct td *td;
+
+ mode = in_8(&usb->fhci->regs->usb_mod);
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+ fhci_flush_bds(usb);
+
+ while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+ struct packet *pkt = td->pkt;
+
+ pkt->status = USB_TD_TX_ER_TIMEOUT;
+ fhci_transaction_confirm(usb, pkt);
+ }
+
+ usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+ /* reset the event register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ /* enable the USB controller */
+ out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+ u32 fw_transaction_time, len = 0;
+ struct packet *pkt;
+ u8 *data = NULL;
+
+ /* calcalate data address,len and toggle and then add the transaction */
+ if (td->toggle == USB_TD_TOGGLE_CARRY)
+ td->toggle = ed->toggle_carry;
+
+ switch (ed->mode) {
+ case FHCI_TF_ISO:
+ len = td->len;
+ if (td->type != FHCI_TA_IN)
+ data = td->data;
+ break;
+ case FHCI_TF_CTRL:
+ case FHCI_TF_BULK:
+ len = min(td->len - td->actual_len, ed->max_pkt_size);
+ if (!((td->type == FHCI_TA_IN) &&
+ ((len + td->actual_len) == td->len)))
+ data = td->data + td->actual_len;
+ break;
+ case FHCI_TF_INTR:
+ len = min(td->len, ed->max_pkt_size);
+ if (!((td->type == FHCI_TA_IN) &&
+ ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+ data = td->data;
+ break;
+ default:
+ break;
+ }
+
+ if (usb->port_status == FHCI_PORT_FULL)
+ fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+ else
+ fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+ /* check if there's enough space in this frame to submit this TD */
+ if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+ usb->max_bytes_per_frame) {
+ fhci_vdbg(usb->fhci, "not enough space in this frame: "
+ "%d %d %d\n", usb->actual_frame->total_bytes, len,
+ usb->max_bytes_per_frame);
+ return -1;
+ }
+
+ /* check if there's enough time in this frame to submit this TD */
+ if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+ (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+ (fw_transaction_time + usb->sw_transaction_time >=
+ 1000 - fhci_get_sof_timer_count(usb)))) {
+ fhci_dbg(usb->fhci, "not enough time in this frame\n");
+ return -1;
+ }
+
+ /* update frame object fields before transmitting */
+ pkt = cq_get(usb->ep0->empty_frame_Q);
+ if (!pkt) {
+ fhci_dbg(usb->fhci, "there is no empty frame\n");
+ return -1;
+ }
+ td->pkt = pkt;
+
+ pkt->info = 0;
+ if (data == NULL) {
+ data = cq_get(usb->ep0->dummy_packets_Q);
+ BUG_ON(!data);
+ pkt->info = PKT_DUMMY_PACKET;
+ }
+ pkt->data = data;
+ pkt->len = len;
+ pkt->status = USB_TD_OK;
+ /* update TD status field before transmitting */
+ td->status = USB_TD_INPROGRESS;
+ /* update actual frame time object with the actual transmission */
+ usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+ fhci_add_td_to_frame(usb->actual_frame, td);
+
+ if (usb->port_status != FHCI_PORT_FULL &&
+ usb->port_status != FHCI_PORT_LOW) {
+ pkt->status = USB_TD_TX_ER_TIMEOUT;
+ pkt->len = 0;
+ fhci_transaction_confirm(usb, pkt);
+ } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+ ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+ /* remove TD from actual frame */
+ list_del_init(&td->frame_lh);
+ td->status = USB_TD_OK;
+ if (pkt->info & PKT_DUMMY_PACKET)
+ cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+ recycle_frame(usb, pkt);
+ usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+ fhci_err(usb->fhci, "host transaction failed\n");
+ return -1;
+ }
+
+ return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+ struct list_head *node = list->next;
+
+ if (!list_empty(list)) {
+ list_del(node);
+ list_add_tail(node, list);
+ }
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+ struct list_head *list, enum fhci_tf_mode list_type)
+{
+ static const int frame_part[4] = {
+ [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+ [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+ MAX_PERIODIC_FRAME_USAGE) / 100,
+ [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+ [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+ MAX_PERIODIC_FRAME_USAGE) / 100
+ };
+ struct ed *ed;
+ struct td *td;
+ int ans = 1;
+ u32 save_transaction_time = usb->sw_transaction_time;
+
+ list_for_each_entry(ed, list, node) {
+ td = ed->td_head;
+
+ if (!td || (td && td->status == USB_TD_INPROGRESS))
+ continue;
+
+ if (ed->state != FHCI_ED_OPER) {
+ if (ed->state == FHCI_ED_URB_DEL) {
+ td->status = USB_TD_OK;
+ fhci_move_td_from_ed_to_done_list(usb, ed);
+ ed->state = FHCI_ED_SKIP;
+ }
+ continue;
+ }
+
+ /*
+ * if it isn't interrupt pipe or it is not iso pipe and the
+ * interval time passed
+ */
+ if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+ (((usb->actual_frame->frame_num -
+ td->start_frame) & 0x7ff) < td->interval))
+ continue;
+
+ if (add_packet(usb, ed, td) < 0)
+ continue;
+
+ /* update time stamps in the TD */
+ td->start_frame = usb->actual_frame->frame_num;
+ usb->sw_transaction_time += save_transaction_time;
+
+ if (usb->actual_frame->total_bytes >=
+ usb->max_bytes_per_frame) {
+ usb->actual_frame->frame_status =
+ FRAME_DATA_END_TRANSMISSION;
+ fhci_push_dummy_bd(usb->ep0);
+ ans = 0;
+ break;
+ }
+
+ if (usb->actual_frame->total_bytes >= frame_part[list_type])
+ break;
+ }
+
+ /* be fair to each ED(move list head around) */
+ move_head_to_tail(list);
+ usb->sw_transaction_time = save_transaction_time;
+
+ return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+ struct fhci_hcd *fhci = usb->fhci;
+
+ if (!list_empty(&usb->actual_frame->tds_list)) {
+ if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+ usb->actual_frame->frame_num) & 0x7ff) > 5)
+ fhci_flush_actual_frame(usb);
+ else
+ return -EINVAL;
+ }
+
+ usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+ usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+ usb->actual_frame->total_bytes = 0;
+
+ return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+ int left = 1;
+
+ if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+ if (rotate_frames(usb) != 0)
+ return;
+
+ if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+ return;
+
+ if (usb->actual_frame->total_bytes == 0) {
+ /*
+ * schedule the next available ISO transfer
+ *or next stage of the ISO transfer
+ */
+ scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+ /*
+ * schedule the next available interrupt transfer or
+ * the next stage of the interrupt transfer
+ */
+ scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+ /*
+ * schedule the next available control transfer
+ * or the next stage of the control transfer
+ */
+ left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+ FHCI_TF_CTRL);
+ }
+
+ /*
+ * schedule the next available bulk transfer or the next stage of the
+ * bulk transfer
+ */
+ if (left > 0)
+ scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ if ((usb->port_status == FHCI_PORT_DISABLED) &&
+ (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+ !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+ if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+ usb->port_status = FHCI_PORT_LOW;
+ else
+ usb->port_status = FHCI_PORT_FULL;
+ /* Disable IDLE */
+ usb->saved_msk &= ~USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+ }
+
+ gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+ fhci_host_transmit_actual_frame(usb);
+ usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+ fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_usb_disable_interrupt(usb);
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+ usb->port_status = FHCI_PORT_DISABLED;
+
+ fhci_stop_sof_timer(fhci);
+
+ /* Enable IDLE since we want to know if something comes along */
+ usb->saved_msk |= USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+ usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+ usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ usb->max_bytes_per_frame = 0;
+ fhci_usb_enable_interrupt(usb);
+
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+ struct fhci_usb *usb = fhci->usb_lld;
+ int state;
+ int ret;
+
+ fhci_dbg(fhci, "-> %s\n", __func__);
+
+ fhci_usb_disable_interrupt(usb);
+ state = fhci_ioports_check_bus_state(fhci);
+
+ /* low-speed device was connected to the USB port */
+ if (state == 1) {
+ ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+ if (ret) {
+ fhci_warn(fhci, "Low-Speed device is not supported, "
+ "try use BRGx\n");
+ goto out;
+ }
+
+ usb->port_status = FHCI_PORT_LOW;
+ setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+ usb->vroot_hub->port.wPortStatus |=
+ (USB_PORT_STAT_LOW_SPEED |
+ USB_PORT_STAT_CONNECTION);
+ usb->vroot_hub->port.wPortChange |=
+ USB_PORT_STAT_C_CONNECTION;
+ usb->max_bytes_per_frame =
+ (MAX_BYTES_PER_FRAME >> 3) - 7;
+ fhci_port_enable(usb);
+ } else if (state == 2) {
+ ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+ if (ret) {
+ fhci_warn(fhci, "Full-Speed device is not supported, "
+ "try use CLKx\n");
+ goto out;
+ }
+
+ usb->port_status = FHCI_PORT_FULL;
+ clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+ usb->vroot_hub->port.wPortStatus &=
+ ~USB_PORT_STAT_LOW_SPEED;
+ usb->vroot_hub->port.wPortStatus |=
+ USB_PORT_STAT_CONNECTION;
+ usb->vroot_hub->port.wPortChange |=
+ USB_PORT_STAT_C_CONNECTION;
+ usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+ fhci_port_enable(usb);
+ }
+out:
+ fhci_usb_enable_interrupt(usb);
+ fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+ struct usb_hcd *hcd = _hcd;
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ struct fhci_usb *usb = fhci->usb_lld;
+
+ spin_lock(&fhci->lock);
+
+ gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+ if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+ usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+ fhci_push_dummy_bd(usb->ep0);
+ }
+
+ fhci_schedule_transactions(usb);
+
+ spin_unlock(&fhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+ fhci_dbg(usb->fhci, "-> %s\n", __func__);
+ /* issue stop Tx command */
+ qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+ /* flush Tx FIFOs */
+ out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO);
+ udelay(1000);
+ /* reset Tx BDs */
+ fhci_flush_bds(usb);
+ /* issue restart Tx command */
+ qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+ fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+ struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+ struct fhci_usb *usb;
+ u16 usb_er = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fhci->lock, flags);
+
+ usb = fhci->usb_lld;
+
+ usb_er |= in_be16(&usb->fhci->regs->usb_event) &
+ in_be16(&usb->fhci->regs->usb_mask);
+
+ /* clear event bits for next time */
+ out_be16(&usb->fhci->regs->usb_event, usb_er);
+
+ fhci_dbg_isr(fhci, usb_er);
+
+ if (usb_er & USB_E_RESET_MASK) {
+ if ((usb->port_status == FHCI_PORT_FULL) ||
+ (usb->port_status == FHCI_PORT_LOW)) {
+ fhci_device_disconnected_interrupt(fhci);
+ usb_er &= ~USB_E_IDLE_MASK;
+ } else if (usb->port_status == FHCI_PORT_WAITING) {
+ usb->port_status = FHCI_PORT_DISCONNECTING;
+
+ /* Turn on IDLE since we want to disconnect */
+ usb->saved_msk |= USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_event,
+ usb->saved_msk);
+ } else if (usb->port_status == FHCI_PORT_DISABLED) {
+ if (fhci_ioports_check_bus_state(fhci) == 1 &&
+ usb->port_status != FHCI_PORT_LOW &&
+ usb->port_status != FHCI_PORT_FULL)
+ fhci_device_connected_interrupt(fhci);
+ }
+ usb_er &= ~USB_E_RESET_MASK;
+ }
+
+ if (usb_er & USB_E_MSF_MASK) {
+ abort_transmission(fhci->usb_lld);
+ usb_er &= ~USB_E_MSF_MASK;
+ }
+
+ if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+ sof_interrupt(fhci);
+ usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+ }
+
+ if (usb_er & USB_E_TXB_MASK) {
+ fhci_tx_conf_interrupt(fhci->usb_lld);
+ usb_er &= ~USB_E_TXB_MASK;
+ }
+
+ if (usb_er & USB_E_TXE1_MASK) {
+ fhci_tx_conf_interrupt(fhci->usb_lld);
+ usb_er &= ~USB_E_TXE1_MASK;
+ }
+
+ if (usb_er & USB_E_IDLE_MASK) {
+ if (usb->port_status == FHCI_PORT_DISABLED &&
+ usb->port_status != FHCI_PORT_LOW &&
+ usb->port_status != FHCI_PORT_FULL) {
+ usb_er &= ~USB_E_RESET_MASK;
+ fhci_device_connected_interrupt(fhci);
+ } else if (usb->port_status ==
+ FHCI_PORT_DISCONNECTING) {
+ /* XXX usb->port_status = FHCI_PORT_WAITING; */
+ /* Disable IDLE */
+ usb->saved_msk &= ~USB_E_IDLE_MASK;
+ out_be16(&usb->fhci->regs->usb_mask,
+ usb->saved_msk);
+ } else {
+ fhci_dbg_isr(fhci, -1);
+ }
+
+ usb_er &= ~USB_E_IDLE_MASK;
+ }
+
+ spin_unlock_irqrestore(&fhci->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or sucess) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+ struct urb *urb;
+ struct ed *ed;
+ struct td *td;
+ struct urb_priv *urb_priv;
+ struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+ disable_irq(fhci->timer->irq);
+ disable_irq(fhci_to_hcd(fhci)->irq);
+ spin_lock(&fhci->lock);
+
+ td = fhci_remove_td_from_done_list(fhci->hc_list);
+ while (td != NULL) {
+ urb = td->urb;
+ urb_priv = urb->hcpriv;
+ ed = td->ed;
+
+ /* update URB's length and status from TD */
+ fhci_done_td(urb, td);
+ urb_priv->tds_cnt++;
+
+ /*
+ * if all this urb's TDs are done, call complete()
+ * Interrupt transfers are the onley special case:
+ * they are reissued,until "deleted" by usb_unlink_urb
+ * (real work done in a SOF intr, by process_del_list)
+ */
+ if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+ fhci_urb_complete_free(fhci, urb);
+ } else if (urb_priv->state == URB_DEL &&
+ ed->state == FHCI_ED_SKIP) {
+ fhci_del_ed_list(fhci, ed);
+ ed->state = FHCI_ED_OPER;
+ } else if (ed->state == FHCI_ED_HALTED) {
+ urb_priv->state = URB_DEL;
+ ed->state = FHCI_ED_URB_DEL;
+ fhci_del_ed_list(fhci, ed);
+ ed->state = FHCI_ED_OPER;
+ }
+
+ td = fhci_remove_td_from_done_list(fhci->hc_list);
+ }
+
+ spin_unlock(&fhci->lock);
+ enable_irq(fhci->timer->irq);
+ enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET(fhci_tasklet, process_done_list, 0);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+ if (!fhci->process_done_task->state)
+ tasklet_schedule(fhci->process_done_task);
+ return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci data structure for the Low level host controller
+ * ep USB Host endpoint data structure
+ * urb USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+ struct ed *ed = urb->ep->hcpriv;
+ struct urb_priv *urb_priv = urb->hcpriv;
+ u32 data_len = urb->transfer_buffer_length;
+ int urb_state = 0;
+ int toggle = 0;
+ struct td *td;
+ u8 *data;
+ u16 cnt = 0;
+
+ if (ed == NULL) {
+ ed = fhci_get_empty_ed(fhci);
+ ed->dev_addr = usb_pipedevice(urb->pipe);
+ ed->ep_addr = usb_pipeendpoint(urb->pipe);
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ ed->mode = FHCI_TF_CTRL;
+ break;
+ case PIPE_BULK:
+ ed->mode = FHCI_TF_BULK;
+ break;
+ case PIPE_INTERRUPT:
+ ed->mode = FHCI_TF_INTR;
+ break;
+ case PIPE_ISOCHRONOUS:
+ ed->mode = FHCI_TF_ISO;
+ break;
+ default:
+ break;
+ }
+ ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+ FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+ ed->max_pkt_size = usb_maxpacket(urb->dev,
+ urb->pipe, usb_pipeout(urb->pipe));
+ urb->ep->hcpriv = ed;
+ fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+ ed->speed, ed->max_pkt_size);
+ }
+
+ /* for ISO transfer calculate start frame index */
+ if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
+ urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+ get_frame_num(fhci);
+
+ /*
+ * OHCI handles the DATA toggle itself,we just use the USB
+ * toggle bits
+ */
+ if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe)))
+ toggle = USB_TD_TOGGLE_CARRY;
+ else {
+ toggle = USB_TD_TOGGLE_DATA0;
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 1);
+ }
+
+ urb_priv->tds_cnt = 0;
+ urb_priv->ed = ed;
+ if (data_len > 0)
+ data = urb->transfer_buffer;
+ else
+ data = NULL;
+
+ switch (ed->mode) {
+ case FHCI_TF_BULK:
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ urb->transfer_buffer_length > 0 &&
+ ((urb->transfer_buffer_length %
+ usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe))) == 0))
+ urb_state = US_BULK0;
+ while (data_len > 4096) {
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ cnt ? USB_TD_TOGGLE_CARRY :
+ toggle,
+ data, 4096, 0, 0, true);
+ data += 4096;
+ data_len -= 4096;
+ cnt++;
+ }
+
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+ cnt ? USB_TD_TOGGLE_CARRY : toggle,
+ data, data_len, 0, 0, true);
+ cnt++;
+
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ cnt < urb_priv->num_of_tds) {
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+ cnt++;
+ }
+ break;
+ case FHCI_TF_INTR:
+ urb->start_frame = get_frame_num(fhci) + 1;
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+ USB_TD_TOGGLE_DATA0, data, data_len,
+ urb->interval, urb->start_frame, true);
+ break;
+ case FHCI_TF_CTRL:
+ ed->dev_addr = usb_pipedevice(urb->pipe);
+ ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+ USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+ if (data_len > 0) {
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+ true);
+ }
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+ usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
+ USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+ urb_state = US_CTRL_SETUP;
+ break;
+ case FHCI_TF_ISO:
+ for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+ u16 frame = urb->start_frame;
+
+ /*
+ * FIXME scheduling should handle frame counter
+ * roll-around ... exotic case (and OHCI has
+ * a 2^16 iso range, vs other HCs max of 2^10)
+ */
+ frame += cnt * urb->interval;
+ frame &= 0x07ff;
+ td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+ usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+ FHCI_TA_IN,
+ USB_TD_TOGGLE_DATA0,
+ data + urb->iso_frame_desc[cnt].offset,
+ urb->iso_frame_desc[cnt].length,
+ urb->interval, frame, true);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * set the state of URB
+ * control pipe:3 states -- setup,data,status
+ * interrupt and bulk pipe:1 state -- data
+ */
+ urb->pipe &= ~0x1f;
+ urb->pipe |= urb_state & 0x1f;
+
+ urb_priv->state = URB_INPROGRESS;
+
+ if (!ed->td_head) {
+ ed->state = FHCI_ED_OPER;
+ switch (ed->mode) {
+ case FHCI_TF_CTRL:
+ list_add(&ed->node, &fhci->hc_list->ctrl_list);
+ break;
+ case FHCI_TF_BULK:
+ list_add(&ed->node, &fhci->hc_list->bulk_list);
+ break;
+ case FHCI_TF_INTR:
+ list_add(&ed->node, &fhci->hc_list->intr_list);
+ break;
+ case FHCI_TF_ISO:
+ list_add(&ed->node, &fhci->hc_list->iso_list);
+ break;
+ default:
+ break;
+ }
+ }
+
+ fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+ fhci->active_urbs++;
+}
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER 0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R 0x8000 /* ready bit */
+#define TD_W 0x2000 /* wrap bit */
+#define TD_I 0x1000 /* interrupt on completion */
+#define TD_L 0x0800 /* last */
+#define TD_TC 0x0400 /* transmit CRC */
+#define TD_CNF 0x0200 /* CNF - Must be always 1 */
+#define TD_LSP 0x0100 /* Low-speed transaction */
+#define TD_PID 0x00c0 /* packet id */
+#define TD_RXER 0x0020 /* Rx error or not */
+
+#define TD_NAK 0x0010 /* No ack. */
+#define TD_STAL 0x0008 /* Stall recieved */
+#define TD_TO 0x0004 /* time out */
+#define TD_UN 0x0002 /* underrun */
+#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB 0x0008 /* Frame Aborted */
+#define TD_CR 0x0004 /* CRC Error */
+#define TD_OV 0x0002 /* Overrun */
+#define TD_BOV 0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \
+ TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0 0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP 0x0000
+#define TD_TOK_OUT 0x4000
+#define TD_TOK_IN 0x8000
+#define TD_ISO 0x1000
+#define TD_ENDP 0x0780
+#define TD_ADDR 0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+ __be16 status;
+ __be16 length;
+ __be32 buf_ptr;
+ __be16 extra;
+ __be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+ struct usb_td __iomem *td,
+ u16 status)
+{
+ if (status & TD_W)
+ return base;
+ else
+ return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+ if (ep->already_pushed_dummy_bd == false) {
+ u16 td_status = in_be16(&ep->empty_td->status);
+
+ out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+ /* get the next TD in the ring */
+ ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+ ep->already_pushed_dummy_bd = true;
+ }
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+ struct endpoint *ep;
+ int size;
+
+ ep = usb->ep0;
+ if (ep) {
+ if (ep->td_base)
+ cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+ if (ep->conf_frame_Q) {
+ size = cq_howmany(ep->conf_frame_Q);
+ for (; size; size--) {
+ struct packet *pkt = cq_get(ep->conf_frame_Q);
+
+ kfree(pkt);
+ }
+ cq_delete(ep->conf_frame_Q);
+ }
+
+ if (ep->empty_frame_Q) {
+ size = cq_howmany(ep->empty_frame_Q);
+ for (; size; size--) {
+ struct packet *pkt = cq_get(ep->empty_frame_Q);
+
+ kfree(pkt);
+ }
+ cq_delete(ep->empty_frame_Q);
+ }
+
+ if (ep->dummy_packets_Q) {
+ size = cq_howmany(ep->dummy_packets_Q);
+ for (; size; size--) {
+ u8 *buff = cq_get(ep->dummy_packets_Q);
+
+ kfree(buff);
+ }
+ cq_delete(ep->dummy_packets_Q);
+ }
+
+ kfree(ep);
+ usb->ep0 = NULL;
+ }
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb A pointer to the data structure of the USB
+ * data_mem The data memory partition(BUS)
+ * ring_len TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+ u32 ring_len)
+{
+ struct endpoint *ep;
+ struct usb_td __iomem *td;
+ unsigned long ep_offset;
+ char *err_for = "enpoint PRAM";
+ int ep_mem_size;
+ u32 i;
+
+ /* we need at least 3 TDs in the ring */
+ if (!(ring_len > 2)) {
+ fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+ return -EINVAL;
+ }
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+ ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+ if (IS_ERR_VALUE(ep_offset))
+ goto err;
+ ep->td_base = cpm_muram_addr(ep_offset);
+
+ /* zero all queue pointers */
+ ep->conf_frame_Q = cq_new(ring_len + 2);
+ ep->empty_frame_Q = cq_new(ring_len + 2);
+ ep->dummy_packets_Q = cq_new(ring_len + 2);
+ if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) {
+ err_for = "frame_queues";
+ goto err;
+ }
+
+ for (i = 0; i < (ring_len + 1); i++) {
+ struct packet *pkt;
+ u8 *buff;
+
+ pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+ if (!pkt) {
+ err_for = "frame";
+ goto err;
+ }
+
+ buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
+ if (!buff) {
+ kfree(pkt);
+ err_for = "buffer";
+ goto err;
+ }
+ cq_put(ep->empty_frame_Q, pkt);
+ cq_put(ep->dummy_packets_Q, buff);
+ }
+
+ /* we put the endpoint parameter RAM right behind the TD ring */
+ ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+ ep->conf_td = ep->td_base;
+ ep->empty_td = ep->td_base;
+
+ ep->already_pushed_dummy_bd = false;
+
+ /* initialize tds */
+ td = ep->td_base;
+ for (i = 0; i < ring_len; i++) {
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->status, 0);
+ out_be16(&td->length, 0);
+ out_be16(&td->extra, 0);
+ td++;
+ }
+ td--;
+ out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+ out_be16(&td->length, 0);
+
+ /* endpoint structure has been created */
+ usb->ep0 = ep;
+
+ return 0;
+err:
+ fhci_ep0_free(usb);
+ kfree(ep);
+ fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+ return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb A pointer to the data strucutre of the USB
+ * ep A pointer to the endpoint structre
+ * data_mem The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+ enum fhci_mem_alloc data_mem)
+{
+ u8 rt;
+
+ /* set the endpoint registers according to the endpoint */
+ out_be16(&usb->fhci->regs->usb_ep[0],
+ USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+ out_be16(&usb->fhci->pram->ep_ptr[0],
+ cpm_muram_offset(ep->ep_pram_ptr));
+
+ rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+ if (data_mem == MEM_SECONDARY)
+ rt |= BUS_MODE_DTB;
+#endif
+ out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+ out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+ out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+ out_be16(&ep->ep_pram_ptr->rx_base, 0);
+ out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+ out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+ out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also prepearing the TDs for new frames. If the Tx interrupts
+ * are diabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called frome the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+ struct endpoint *ep = usb->ep0;
+ struct packet *pkt;
+ struct usb_td __iomem *td;
+ u16 extra_data;
+ u16 td_status;
+ u16 td_length;
+ u32 buf;
+
+ /*
+ * collect transmitted BDs from the chip. The routine clears all BDs
+ * with R bit = 0 and the pointer to data buffer is not NULL, that is
+ * BDs which point to the transmitted data buffer
+ */
+ while (1) {
+ td = ep->conf_td;
+ td_status = in_be16(&td->status);
+ td_length = in_be16(&td->length);
+ buf = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+
+ /* check if the TD is empty */
+ if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+ break;
+ /* check if it is a dummy buffer */
+ else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+ break;
+
+ /* mark TD as empty */
+ clrbits16(&td->status, ~TD_W);
+ out_be16(&td->length, 0);
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->extra, 0);
+ /* advance the TD pointer */
+ ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+ /* check if it is a dummy buffer(type2) */
+ if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+ continue;
+
+ pkt = cq_get(ep->conf_frame_Q);
+ if (!pkt)
+ fhci_err(usb->fhci, "no frame to confirm\n");
+
+ if (td_status & TD_ERRORS) {
+ if (td_status & TD_RXER) {
+ if (td_status & TD_CR)
+ pkt->status = USB_TD_RX_ER_CRC;
+ else if (td_status & TD_AB)
+ pkt->status = USB_TD_RX_ER_BITSTUFF;
+ else if (td_status & TD_OV)
+ pkt->status = USB_TD_RX_ER_OVERUN;
+ else if (td_status & TD_BOV)
+ pkt->status = USB_TD_RX_DATA_OVERUN;
+ else if (td_status & TD_NO)
+ pkt->status = USB_TD_RX_ER_NONOCT;
+ else
+ fhci_err(usb->fhci, "illegal error "
+ "occured\n");
+ } else if (td_status & TD_NAK)
+ pkt->status = USB_TD_TX_ER_NAK;
+ else if (td_status & TD_TO)
+ pkt->status = USB_TD_TX_ER_TIMEOUT;
+ else if (td_status & TD_UN)
+ pkt->status = USB_TD_TX_ER_UNDERUN;
+ else if (td_status & TD_STAL)
+ pkt->status = USB_TD_TX_ER_STALL;
+ else
+ fhci_err(usb->fhci, "illegal error occured\n");
+ } else if ((extra_data & TD_TOK_IN) &&
+ pkt->len > td_length - CRC_SIZE) {
+ pkt->status = USB_TD_RX_DATA_UNDERUN;
+ }
+
+ if (extra_data & TD_TOK_IN)
+ pkt->len = td_length - CRC_SIZE;
+ else if (pkt->info & PKT_ZLP)
+ pkt->len = 0;
+ else
+ pkt->len = td_length;
+
+ fhci_transaction_confirm(usb, pkt);
+ }
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb A pointer to the USB structure
+ * pkt A pointer to the user frame structure
+ * trans_type Transaction tyep - IN,OUT or SETUP
+ * dest_addr Device address - 0~127
+ * dest_ep Endpoint number of the device - 0~16
+ * trans_mode Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed USB speed - Low speed or FULL speed
+ * data_toggle Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+ struct packet *pkt,
+ enum fhci_ta_type trans_type,
+ u8 dest_addr,
+ u8 dest_ep,
+ enum fhci_tf_mode trans_mode,
+ enum fhci_speed dest_speed, u8 data_toggle)
+{
+ struct endpoint *ep = usb->ep0;
+ struct usb_td __iomem *td;
+ u16 extra_data;
+ u16 td_status;
+
+ fhci_usb_disable_interrupt(usb);
+ /* start from the next BD that should be filled */
+ td = ep->empty_td;
+ td_status = in_be16(&td->status);
+
+ if (td_status & TD_R && in_be16(&td->length)) {
+ /* if the TD is not free */
+ fhci_usb_enable_interrupt(usb);
+ return -1;
+ }
+
+ /* get the next TD in the ring */
+ ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+ fhci_usb_enable_interrupt(usb);
+ pkt->priv_data = td;
+ out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+ /* sets up transaction parameters - addr,endp,dir,and type */
+ extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+ switch (trans_type) {
+ case FHCI_TA_IN:
+ extra_data |= TD_TOK_IN;
+ break;
+ case FHCI_TA_OUT:
+ extra_data |= TD_TOK_OUT;
+ break;
+ case FHCI_TA_SETUP:
+ extra_data |= TD_TOK_SETUP;
+ break;
+ }
+ if (trans_mode == FHCI_TF_ISO)
+ extra_data |= TD_ISO;
+ out_be16(&td->extra, extra_data);
+
+ /* sets up the buffer descriptor */
+ td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+ if (!(pkt->info & PKT_NO_CRC))
+ td_status |= TD_TC;
+
+ switch (trans_type) {
+ case FHCI_TA_IN:
+ if (data_toggle)
+ pkt->info |= PKT_PID_DATA1;
+ else
+ pkt->info |= PKT_PID_DATA0;
+ break;
+ default:
+ if (data_toggle) {
+ td_status |= TD_PID_DATA1;
+ pkt->info |= PKT_PID_DATA1;
+ } else {
+ td_status |= TD_PID_DATA0;
+ pkt->info |= PKT_PID_DATA0;
+ }
+ break;
+ }
+
+ if ((dest_speed == FHCI_LOW_SPEED) &&
+ (usb->port_status == FHCI_PORT_FULL))
+ td_status |= TD_LSP;
+
+ out_be16(&td->status, td_status);
+
+ /* set up buffer length */
+ if (trans_type == FHCI_TA_IN)
+ out_be16(&td->length, pkt->len + CRC_SIZE);
+ else
+ out_be16(&td->length, pkt->len);
+
+ /* put the frame to the confirmation queue */
+ cq_put(ep->conf_frame_Q, pkt);
+
+ if (cq_howmany(ep->conf_frame_Q) == 1)
+ out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+ return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+ u16 extra_data;
+ u16 td_status;
+ u32 buf;
+ struct usb_td __iomem *td;
+ struct endpoint *ep = usb->ep0;
+
+ td = ep->td_base;
+ while (1) {
+ td_status = in_be16(&td->status);
+ buf = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+
+ /* if the TD is not empty - we'll confirm it as Timeout */
+ if (td_status & TD_R)
+ out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+ /* if this TD is dummy - let's skip this TD */
+ else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+ out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+ /* if this is the last TD - break */
+ if (td_status & TD_W)
+ break;
+
+ td++;
+ }
+
+ fhci_td_transaction_confirm(usb);
+
+ td = ep->td_base;
+ do {
+ out_be16(&td->status, 0);
+ out_be16(&td->length, 0);
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->extra, 0);
+ td++;
+ } while (!(in_be16(&td->status) & TD_W));
+ out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+ out_be16(&td->length, 0);
+ out_be32(&td->buf_ptr, 0);
+ out_be16(&td->extra, 0);
+
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+ in_be16(&ep->ep_pram_ptr->tx_base));
+ out_be32(&ep->ep_pram_ptr->tx_state, 0);
+ out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+ ep->empty_td = ep->td_base;
+ ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+ u8 mode;
+ u16 tb_ptr;
+ u16 extra_data;
+ u16 td_status;
+ u32 buf_ptr;
+ struct usb_td __iomem *td;
+ struct endpoint *ep = usb->ep0;
+
+ /* disable the USB controller */
+ mode = in_8(&usb->fhci->regs->usb_mod);
+ out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
+
+ tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+ td = cpm_muram_addr(tb_ptr);
+ td_status = in_be16(&td->status);
+ buf_ptr = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+ do {
+ if (td_status & TD_R) {
+ out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+ } else {
+ out_be32(&td->buf_ptr, 0);
+ ep->already_pushed_dummy_bd = false;
+ break;
+ }
+
+ /* advance the TD pointer */
+ td = next_bd(ep->td_base, td, td_status);
+ td_status = in_be16(&td->status);
+ buf_ptr = in_be32(&td->buf_ptr);
+ extra_data = in_be16(&td->extra);
+ } while ((td_status & TD_R) || buf_ptr);
+
+ fhci_td_transaction_confirm(usb);
+
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+ in_be16(&ep->ep_pram_ptr->tx_base));
+ out_be32(&ep->ep_pram_ptr->tx_state, 0);
+ out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+ ep->empty_td = ep->td_base;
+ ep->conf_td = ep->td_base;
+
+ usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+ /* reset the event register */
+ out_be16(&usb->fhci->regs->usb_event, 0xffff);
+ /* enable the USB controller */
+ out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+ fhci_td_transaction_confirm(usb);
+
+ /*
+ * Schedule another transaction to this frame only if we have
+ * already confirmed all transaction in the frame.
+ */
+ if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+ (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+ (list_empty(&usb->actual_frame->tds_list)))
+ fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+ u16 tb_ptr;
+ u16 td_status;
+ struct usb_td __iomem *td;
+ struct endpoint *ep = usb->ep0;
+
+ tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+ td = cpm_muram_addr(tb_ptr);
+
+ if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+ struct usb_td __iomem *old_td = td;
+
+ ep->already_pushed_dummy_bd = false;
+ td_status = in_be16(&td->status);
+ /* gets the next TD in the ring */
+ td = next_bd(ep->td_base, td, td_status);
+ tb_ptr = cpm_muram_offset(td);
+ out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+ /* start transmit only if we have something in the TDs */
+ if (in_be16(&td->status) & TD_R)
+ out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+ if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+ out_be32(&old_td->buf_ptr, 0);
+ ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+ td_status);
+ } else {
+ out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+ }
+ }
+}
--- /dev/null
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ * Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+
+#define USB_CLOCK 48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS 32
+#define MAX_TDS 32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */
+#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */
+#define PKT_HOST_DATA 0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */
+#define PKT_ZLP 0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME 0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME 0x00020000 /* NACK packet */
+#define PKT_NO_PID 0x00010000 /* No PID */
+#define PKT_NO_CRC 0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK (0)
+#define TRANS_INPROGRESS (-1)
+#define TRANS_DISCARD (-2)
+#define TRANS_FAIL (-3)
+
+#define PS_INT 0
+#define PS_DISCONNECTED 1
+#define PS_CONNECTED 2
+#define PS_READY 3
+#define PS_MISSING 4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK 0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+ USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+ USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+ USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+ USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0 0
+#define USB_TD_TOGGLE_DATA1 1
+#define USB_TD_TOGGLE_CARRY 2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL 0x20 /* Global snooping */
+#define BUS_MODE_BO 0x18 /* Byte ordering */
+#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */
+#define BUS_MODE_DTB 0x02 /* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN 0x01
+#define USB_MODE_HOST 0x02
+#define USB_MODE_TEST 0x04
+#define USB_MODE_SFTE 0x08
+#define USB_MODE_RESUME 0x40
+#define USB_MODE_LSS 0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK 0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK 0xF000
+#define USB_EPNUM_SHIFT 12
+
+#define USB_TRANS_MODE_SHIFT 8
+#define USB_TRANS_CTR 0x0000
+#define USB_TRANS_INT 0x0100
+#define USB_TRANS_BULK 0x0200
+#define USB_TRANS_ISO 0x0300
+
+#define USB_EP_MF 0x0020
+#define USB_EP_RTE 0x0010
+
+#define USB_THS_SHIFT 2
+#define USB_THS_MASK 0x000c
+#define USB_THS_NORMAL 0x0
+#define USB_THS_IGNORE_IN 0x0004
+#define USB_THS_NACK 0x0008
+#define USB_THS_STALL 0x000c
+
+#define USB_RHS_SHIFT 0
+#define USB_RHS_MASK 0x0003
+#define USB_RHS_NORMAL 0x0
+#define USB_RHS_IGNORE_OUT 0x0001
+#define USB_RHS_NACK 0x0002
+#define USB_RHS_STALL 0x0003
+
+#define USB_RTHS_MASK 0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO 0x80
+#define USB_CMD_FLUSH_FIFO 0x40
+#define USB_CMD_ISFT 0x20
+#define USB_CMD_DSFT 0x10
+#define USB_CMD_EP_MASK 0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK 0x0800
+#define USB_E_SFT_MASK 0x0400
+#define USB_E_RESET_MASK 0x0200
+#define USB_E_IDLE_MASK 0x0100
+#define USB_E_TXE4_MASK 0x0080
+#define USB_E_TXE3_MASK 0x0040
+#define USB_E_TXE2_MASK 0x0020
+#define USB_E_TXE1_MASK 0x0010
+#define USB_E_SOF_MASK 0x0008
+#define USB_E_BSY_MASK 0x0004
+#define USB_E_TXB_MASK 0x0002
+#define USB_E_RXB_MASK 0x0001
+
+/* Freescale USB Host controller registers */
+struct fhci_regs {
+ u8 usb_mod; /* mode register */
+ u8 usb_addr; /* address register */
+ u8 usb_comm; /* command register */
+ u8 reserved1[1];
+ __be16 usb_ep[4]; /* endpoint register */
+ u8 reserved2[4];
+ __be16 usb_event; /* event register */
+ u8 reserved3[2];
+ __be16 usb_mask; /* mask register */
+ u8 reserved4[1];
+ u8 usb_status; /* status register */
+ __be16 usb_sof_tmr; /* Start Of Frame timer */
+ u8 reserved5[2];
+ __be16 usb_frame_num; /* frame number register */
+ u8 reserved6[1];
+};
+
+/* Freescale USB HOST */
+struct fhci_pram {
+ __be16 ep_ptr[4]; /* Endpoint porter reg */
+ __be32 rx_state; /* Rx internal state */
+ __be32 rx_ptr; /* Rx internal data pointer */
+ __be16 frame_num; /* Frame number */
+ __be16 rx_cnt; /* Rx byte count */
+ __be32 rx_temp; /* Rx temp */
+ __be32 rx_data_temp; /* Rx data temp */
+ __be16 rx_u_ptr; /* Rx microcode return address temp */
+ u8 reserved1[2]; /* reserved area */
+ __be32 sof_tbl; /* SOF lookup table pointer */
+ u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */
+ u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+ __be16 rx_base; /* Rx BD base address */
+ __be16 tx_base; /* Tx BD base address */
+ u8 rx_func_code; /* Rx function code */
+ u8 tx_func_code; /* Tx function code */
+ __be16 rx_buff_len; /* Rx buffer length */
+ __be16 rx_bd_ptr; /* Rx BD pointer */
+ __be16 tx_bd_ptr; /* Tx BD pointer */
+ __be32 tx_state; /* Tx internal state */
+ __be32 tx_ptr; /* Tx internal data pointer */
+ __be16 tx_crc; /* temp transmit CRC */
+ __be16 tx_cnt; /* Tx byte count */
+ __be32 tx_temp; /* Tx temp */
+ __be16 tx_u_ptr; /* Tx microcode return address temp */
+ __be16 reserved;
+};
+
+struct fhci_controller_list {
+ struct list_head ctrl_list; /* control endpoints */
+ struct list_head bulk_list; /* bulk endpoints */
+ struct list_head iso_list; /* isochronous endpoints */
+ struct list_head intr_list; /* interruput endpoints */
+ struct list_head done_list; /* done transfers */
+};
+
+struct virtual_root_hub {
+ int dev_num; /* USB address of the root hub */
+ u32 feature; /* indicates what feature has been set */
+ struct usb_hub_status hub;
+ struct usb_port_status port;
+};
+
+enum fhci_gpios {
+ GPIO_USBOE = 0,
+ GPIO_USBTP,
+ GPIO_USBTN,
+ GPIO_USBRP,
+ GPIO_USBRN,
+ /* these are optional */
+ GPIO_SPEED,
+ GPIO_POWER,
+ NUM_GPIOS,
+};
+
+enum fhci_pins {
+ PIN_USBOE = 0,
+ PIN_USBTP,
+ PIN_USBTN,
+ NUM_PINS,
+};
+
+struct fhci_hcd {
+ enum qe_clock fullspeed_clk;
+ enum qe_clock lowspeed_clk;
+ struct qe_pin *pins[NUM_PINS];
+ int gpios[NUM_GPIOS];
+ bool alow_gpios[NUM_GPIOS];
+
+ struct fhci_regs __iomem *regs; /* I/O memory used to communicate */
+ struct fhci_pram __iomem *pram; /* Parameter RAM */
+ struct gtm_timer *timer;
+
+ spinlock_t lock;
+ struct fhci_usb *usb_lld; /* Low-level driver */
+ struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+ int active_urbs;
+ struct fhci_controller_list *hc_list;
+ struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+ struct list_head empty_eds;
+ struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+ int usb_irq_stat[13];
+ struct dentry *dfs_root;
+ struct dentry *dfs_regs;
+ struct dentry *dfs_irq_stat;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+ FHCI_TA_IN = 0, /* input transaction */
+ FHCI_TA_OUT, /* output transaction */
+ FHCI_TA_SETUP, /* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+ FHCI_TF_CTRL = 0,
+ FHCI_TF_ISO,
+ FHCI_TF_BULK,
+ FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+ FHCI_FULL_SPEED,
+ FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+ FHCI_ED_NEW = 0, /* pipe is new */
+ FHCI_ED_OPER, /* pipe is operating */
+ FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+ FHCI_ED_SKIP, /* skip this pipe */
+ FHCI_ED_HALTED, /* pipe is halted */
+};
+
+enum fhci_port_status {
+ FHCI_PORT_POWER_OFF = 0,
+ FHCI_PORT_DISABLED,
+ FHCI_PORT_DISCONNECTING,
+ FHCI_PORT_WAITING, /* waiting for connection */
+ FHCI_PORT_FULL, /* full speed connected */
+ FHCI_PORT_LOW, /* low speed connected */
+};
+
+enum fhci_mem_alloc {
+ MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */
+ MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */
+ MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */
+ MEM_PRAM = 0x00000008, /* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN 8
+#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS
+
+struct ed {
+ u8 dev_addr; /* device address */
+ u8 ep_addr; /* endpoint address */
+ enum fhci_tf_mode mode; /* USB transfer mode */
+ enum fhci_speed speed;
+ unsigned int max_pkt_size;
+ enum fhci_ed_state state;
+ struct list_head td_list; /* a list of all queued TD to this pipe */
+ struct list_head node;
+
+ /* read only parameters, should be cleared upon initialization */
+ u8 toggle_carry; /* toggle carry from the last TD submitted */
+ u32 last_iso; /* time stamp of last queued ISO transfer */
+ struct td *td_head; /* a pointer to the current TD handled */
+};
+
+struct td {
+ void *data; /* a pointer to the data buffer */
+ unsigned int len; /* length of the data to be submitted */
+ unsigned int actual_len; /* actual bytes transfered on this td */
+ enum fhci_ta_type type; /* transaction type */
+ u8 toggle; /* toggle for next trans. within this TD */
+ u16 iso_index; /* ISO transaction index */
+ u16 start_frame; /* start frame time stamp */
+ u16 interval; /* interval between trans. (for ISO/Intr) */
+ u32 status; /* status of the TD */
+ struct ed *ed; /* a handle to the corresponding ED */
+ struct urb *urb; /* a handle to the corresponding URB */
+ bool ioc; /* Inform On Completion */
+ struct list_head node;
+
+ /* read only parameters should be cleared upon initialization */
+ struct packet *pkt;
+ int nak_cnt;
+ int error_cnt;
+ struct list_head frame_lh;
+};
+
+struct packet {
+ u8 *data; /* packet data */
+ u32 len; /* packet length */
+ u32 status; /* status of the packet - equivalent to the status
+ * field for the corresponding structure td */
+ u32 info; /* packet information */
+ void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS 0
+#define URB_DEL 1
+
+/* URB states (state field) */
+#define US_BULK 0
+#define US_BULK0 1
+
+/* three setup states */
+#define US_CTRL_SETUP 2
+#define US_CTRL_DATA 1
+#define US_CTRL_ACK 0
+
+#define EP_ZERO 0
+
+struct urb_priv {
+ int num_of_tds;
+ int tds_cnt;
+ int state;
+
+ struct td **tds;
+ struct ed *ed;
+ struct timer_list time_out;
+};
+
+struct endpoint {
+ /* Pointer to ep parameter RAM */
+ struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+ /* Host transactions */
+ struct usb_td __iomem *td_base; /* first TD in the ring */
+ struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+ struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+ struct kfifo *empty_frame_Q; /* Empty frames list to use */
+ struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */
+ struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */
+
+ bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED 0x00
+#define FRAME_TIMER_END_TRANSMISSION 0x01
+#define FRAME_DATA_END_TRANSMISSION 0x02
+#define FRAME_END_TRANSMISSION 0x03
+#define FRAME_IS_PREPARED 0x04
+
+struct fhci_time_frame {
+ u16 frame_num; /* frame number */
+ u16 total_bytes; /* total bytes submitted within this frame */
+ u8 frame_status; /* flag that indicates to stop fill this frame */
+ struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+ u16 saved_msk; /* saving of the USB mask register */
+ struct endpoint *ep0; /* pointer for endpoint0 structure */
+ int intr_nesting_cnt; /* interrupt nesting counter */
+ u16 max_frame_usage; /* max frame time usage,in micro-sec */
+ u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+ u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+ struct fhci_time_frame *actual_frame;
+ struct fhci_controller_list *hc_list; /* main structure for hc */
+ struct virtual_root_hub *vroot_hub;
+ enum fhci_port_status port_status; /* v_rh port status */
+
+ u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+ struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+ return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+ dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+ dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+ dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+ dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+ dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+ return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+ return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline struct kfifo *cq_new(int size)
+{
+ return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+ kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+ return __kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+ return __kfifo_put(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+ void *p = NULL;
+
+ __kfifo_get(kfifo, (void *)&p, sizeof(p));
+ return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+ struct urb_priv *urb_priv, struct ed *ed, u16 index,
+ enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+ u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+ enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+ enum fhci_ta_type trans_type, u8 dest_addr,
+ u8 dest_ep, enum fhci_tf_mode trans_mode,
+ enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+ u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+ struct endpoint *ep,
+ enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
* to be checked in case boot firmware (BIOS/SMM/...) has set up
* wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
* If the bus glue detected wakeup capability then it should
- * already be enabled. Either way, if wakeup should be enabled
- * but isn't, we'll enable it now.
+ * already be enabled; if so we'll just enable it again.
*/
- if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
- && !device_can_wakeup(hcd->self.controller))
- device_init_wakeup(hcd->self.controller, 1);
+ if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+ device_set_wakeup_capable(hcd->self.controller, 1);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
return -ENODEV;
}
- usb_host_ck = clk_get(0, "usb_hhc_ck");
+ usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
if (IS_ERR(usb_host_ck))
return PTR_ERR(usb_host_ck);
if (!cpu_is_omap15xx())
- usb_dc_ck = clk_get(0, "usb_dc_ck");
+ usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
else
- usb_dc_ck = clk_get(0, "lb_ck");
+ usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
if (IS_ERR(usb_dc_ck)) {
clk_put(usb_host_ck);
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */
#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */
#define USB_VENDOR_ID_VERNIER 0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
- { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+
#ifdef CONFIG_COMPAT
#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
}
break;
-#ifdef CONFIG_COMPAT
- case MON_IOCX_GET32: {
- struct mon_bin_get32 getb;
-
- if (copy_from_user(&getb, (void __user *)arg,
- sizeof(struct mon_bin_get32)))
- return -EFAULT;
-
- ret = mon_bin_get_event(file, rp,
- compat_ptr(getb.hdr32), compat_ptr(getb.data32),
- getb.alloc32);
- }
- break;
-#endif
-
case MON_IOCX_MFETCH:
{
struct mon_bin_mfetch mfetch;
}
break;
+ case MON_IOCG_STATS: {
+ struct mon_bin_stats __user *sp;
+ unsigned int nevents;
+ unsigned int ndropped;
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ ndropped = rp->cnt_lost;
+ rp->cnt_lost = 0;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ nevents = mon_bin_queued(rp);
+
+ sp = (struct mon_bin_stats __user *)arg;
+ if (put_user(rp->cnt_lost, &sp->dropped))
+ return -EFAULT;
+ if (put_user(nevents, &sp->queued))
+ return -EFAULT;
+
+ }
+ break;
+
+ default:
+ return -ENOTTY;
+ }
+
+ return ret;
+}
+
#ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct mon_reader_bin *rp = file->private_data;
+ int ret;
+
+ switch (cmd) {
+
+ case MON_IOCX_GET32: {
+ struct mon_bin_get32 getb;
+
+ if (copy_from_user(&getb, (void __user *)arg,
+ sizeof(struct mon_bin_get32)))
+ return -EFAULT;
+
+ ret = mon_bin_get_event(file, rp,
+ compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+ getb.alloc32);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+
case MON_IOCX_MFETCH32:
{
struct mon_bin_mfetch32 mfetch;
return ret;
if (put_user(ret, &uptr->nfetch32))
return -EFAULT;
- ret = 0;
}
- break;
-#endif
-
- case MON_IOCG_STATS: {
- struct mon_bin_stats __user *sp;
- unsigned int nevents;
- unsigned int ndropped;
-
- spin_lock_irqsave(&rp->b_lock, flags);
- ndropped = rp->cnt_lost;
- rp->cnt_lost = 0;
- spin_unlock_irqrestore(&rp->b_lock, flags);
- nevents = mon_bin_queued(rp);
+ return 0;
- sp = (struct mon_bin_stats __user *)arg;
- if (put_user(rp->cnt_lost, &sp->dropped))
- return -EFAULT;
- if (put_user(nevents, &sp->queued))
- return -EFAULT;
+ case MON_IOCG_STATS:
+ return mon_bin_ioctl(NULL, file, cmd,
+ (unsigned long) compat_ptr(arg));
- }
- break;
+ case MON_IOCQ_URB_LEN:
+ case MON_IOCQ_RING_SIZE:
+ case MON_IOCT_RING_SIZE:
+ case MON_IOCH_MFLUSH:
+ return mon_bin_ioctl(NULL, file, cmd, arg);
default:
- return -ENOTTY;
+ ;
}
-
- return ret;
+ return -ENOTTY;
}
+#endif /* CONFIG_COMPAT */
static unsigned int
mon_bin_poll(struct file *file, struct poll_table_struct *wait)
/* .write = mon_text_write, */
.poll = mon_bin_poll,
.ioctl = mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = mon_bin_compat_ioctl,
+#endif
.release = mon_bin_release,
.mmap = mon_bin_mmap,
};
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
select TWL4030_USB if MACH_OMAP_3430SDP
+ select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
Say Y here if your system has a dual role high speed USB
depends on USB_MUSB_HDRC && ARCH_OMAP34XX
comment "Blackfin high speed USB Support"
- depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+ depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
config USB_TUSB6010
boolean "TUSB 6010 support"
#include <linux/usb.h>
#include "musb_core.h"
+#include "musb_debug.h"
#include "cppi_dma.h"
}
}
+#ifdef CONFIG_USB_MUSB_DEBUG
static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
{
pr_debug("RXBD/%s %08x: "
bd->hw_next, bd->hw_bufp, bd->hw_off_len,
bd->hw_options);
}
+#endif
static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
{
-#if MUSB_DEBUG > 0
+#ifdef CONFIG_USB_MUSB_DEBUG
struct cppi_descriptor *bd;
if (!_dbg_level(level))
bd->hw_options |= CPPI_SOP_SET;
tail->hw_options |= CPPI_EOP_SET;
- if (debug >= 5) {
+#ifdef CONFIG_USB_MUSB_DEBUG
+ if (_dbg_level(5)) {
struct cppi_descriptor *d;
for (d = rx->head; d; d = d->next)
cppi_dump_rxbd("S", d);
}
+#endif
/* in case the preceding transfer left some state... */
tail = rx->last_processed;
cppi_ch->offset = 0;
cppi_ch->maxpacket = maxpacket;
cppi_ch->buf_len = len;
+ cppi_ch->channel.actual_len = 0;
/* TX channel? or RX? */
if (cppi_ch->transmit)
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/arch/hardware.h>
-#include <mach/arch/memory.h>
-#include <mach/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <mach/gpio.h>
+
#include <asm/mach-types.h>
#include "musb_core.h"
return -EIO;
}
-int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
- /* EVM can't do this (right?) */
- return -EIO;
-}
-
int __init musb_platform_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
musb_gadget_cleanup(musb);
#endif
- if (musb->nIrq >= 0 && musb->irq_wake) {
- disable_irq_wake(musb->nIrq);
+ if (musb->nIrq >= 0) {
+ if (musb->irq_wake)
+ disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
if (is_dma_capable() && musb->dma_controller) {
status = -EBUSY;
goto fail;
}
- musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ musb_ep->type = usb_endpoint_type(desc);
/* check direction and (later) maxpacket size against endpoint */
- if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+ if (usb_endpoint_num(desc) != epnum)
goto fail;
/* REVISIT this rules out high bandwidth periodic transfers */
* packet size (or fail), set the mode, clear the fifo
*/
musb_ep_select(mbase, epnum);
- if (desc->bEndpointAddress & USB_DIR_IN) {
+ if (usb_endpoint_dir_in(desc)) {
u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
if (hw_ep->is_shared_fifo)
goto done;
}
- qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ qh->epnum = usb_endpoint_num(epd);
+ qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
#include "musb_core.h"
comment "OTG and related infrastructure"
-if USB || USB_GADGET
-
config USB_OTG_UTILS
bool
help
Select this to make sure the build includes objects from
the OTG infrastructure directory.
+if USB || USB_GADGET
+
#
# USB Transceiver Drivers
#
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+ { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+ { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+/* Alti-2 products http://www.alti-2.com */
+#define ALTI2_VID 0x1BC9
+#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
#define RATOC_VENDOR_ID 0x0584
#define RATOC_PRODUCT_ID_USB60F 0xb020
+/*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID 0xfb99
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
#define HUAWEI_PRODUCT_E143E 0x143E
#define HUAWEI_PRODUCT_E143F 0x143F
+#define QUANTA_VENDOR_ID 0x0408
+#define QUANTA_PRODUCT_Q101 0xEA02
+#define QUANTA_PRODUCT_Q111 0xEA03
+#define QUANTA_PRODUCT_GLX 0xEA04
+#define QUANTA_PRODUCT_GKE 0xEA05
+#define QUANTA_PRODUCT_GLE 0xEA06
+
#define NOVATELWIRELESS_VENDOR_ID 0x1410
/* YISO PRODUCTS */
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
-#define ONDA_PRODUCT_MT503HS 0x0200
+#define ONDA_PRODUCT_MT503HS 0x2000
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ }
};
/* Vendor and product ids */
#define TI_VENDOR_ID 0x0451
+#define IBM_VENDOR_ID 0x04b3
#define TI_3410_PRODUCT_ID 0x3410
+#define IBM_4543_PRODUCT_ID 0x4543
#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ * "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
+ "RockChip",
+ "MTP",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
* This USB MP3/AVI player device fails and disconnects if more than 128
* sectors (64kB) are read/written in a single command, and may be present
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+ "Argosy",
+ "Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Flag will support Bulk devices which use a standards-violating 32-byte
* Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "MD400",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* Reported by Jan Mate <mate@fiit.stuba.sk>
* and by Soeren Sonnenburg <kernel@nn7.de> */
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
- * This entry is needed to bypass the ZeroCD mechanism
- * and to properly load as a modem device.
- */
-UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000,
- "Onda ET502HS",
- "USB MMC Storage",
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+ "ST",
+ "2A",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_DEVICE),
+ US_FL_FIX_CAPACITY),
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
You need an utility program called fbset to make full use of frame
buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
and the Framebuffer-HOWTO at
- <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+ <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
information.
Say Y here and to the driver for your graphics board below if you
Select this option if display contents should be inherited as set by
the bootloader.
+config FB_MX3
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_MX3) += mx3fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
snprintf(chan->adapter.name, sizeof(chan->adapter.name),
"radeonfb %s", name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_HW_B_RADEON;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->rinfo->pdev->dev;
chan->algo.setsda = radeon_gpio_setsda;
chan->adapter.owner = THIS_MODULE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->dev->dev;
- chan->adapter.id = I2C_HW_B_I810;
chan->algo.setsda = i810i2c_setsda;
chan->algo.setscl = i810i2c_setscl;
chan->algo.getsda = i810i2c_getsda;
"intelfb %s", name);
chan->adapter.class = class;
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_HW_B_INTELFB;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->dinfo->pdev->dev;
chan->algo.setsda = intelfb_gpio_setsda;
--- /dev/null
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <mach/hardware.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MX3FB_NAME "mx3_sdc_fb"
+
+#define MX3FB_REG_OFFSET 0xB4
+
+/* SDC Registers */
+#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR 0x00000001UL
+#define SDC_COM_FG_EN 0x00000010UL
+#define SDC_COM_GWSEL 0x00000020UL
+#define SDC_COM_GLB_A 0x00000040UL
+#define SDC_COM_KEY_COLOR_G 0x00000080UL
+#define SDC_COM_BG_EN 0x00000200UL
+#define SDC_COM_SHARP 0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L 0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL_SHIFT 28
+#define DI_D3_HSYNC_POL_SHIFT 27
+#define DI_D3_DRDY_SHARP_POL_SHIFT 26
+#define DI_D3_CLK_POL_SHIFT 25
+#define DI_D3_DATA_POL_SHIFT 24
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE_SHIFT 26
+#define DI_D3_CLK_SEL_SHIFT 25
+#define DI_D3_DATAMSK_SHIFT 24
+
+enum ipu_panel {
+ IPU_PANEL_SHARP_TFT,
+ IPU_PANEL_TFT,
+};
+
+struct ipu_di_signal_cfg {
+ unsigned datamask_en:1;
+ unsigned clksel_en:1;
+ unsigned clkidle_en:1;
+ unsigned data_pol:1; /* true = inverted */
+ unsigned clk_pol:1; /* true = rising edge */
+ unsigned enable_pol:1;
+ unsigned Hsync_pol:1; /* true = active high */
+ unsigned Vsync_pol:1;
+};
+
+static const struct fb_videomode mx3fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x33 @ 60 Hz */
+ .name = "Sharp-CLI",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 33,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9 + 287,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 640x480 @ 60 Hz */
+ .name = "NEC-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 34,
+ .lower_margin = 40,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* NTSC TV output */
+ .name = "TV-NTSC",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 858 - 640 - 38 - 3,
+ .upper_margin = 36,
+ .lower_margin = 518 - 480 - 36 - 1,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* PAL TV output */
+ .name = "TV-PAL",
+ .refresh = 50,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 960 - 640 - 38 - 32,
+ .upper_margin = 32,
+ .lower_margin = 555 - 480 - 32 - 3,
+ .hsync_len = 32,
+ .vsync_len = 3,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* TV output VGA mode, 640x480 @ 65 Hz */
+ .name = "TV-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40574,
+ .left_margin = 35,
+ .right_margin = 45,
+ .upper_margin = 9,
+ .lower_margin = 1,
+ .hsync_len = 46,
+ .vsync_len = 5,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+struct mx3fb_data {
+ struct fb_info *fbi;
+ int backlight_level;
+ void __iomem *reg_base;
+ spinlock_t lock;
+ struct device *dev;
+
+ uint32_t h_start_width;
+ uint32_t v_start_width;
+};
+
+struct dma_chan_request {
+ struct mx3fb_data *mx3fb;
+ enum ipu_channel id;
+};
+
+/* MX3 specific framebuffer information. */
+struct mx3fb_info {
+ int blank;
+ enum ipu_channel ipu_ch;
+ uint32_t cur_ipu_buf;
+
+ u32 pseudo_palette[16];
+
+ struct completion flip_cmpl;
+ struct mutex mutex; /* Protects fb-ops */
+ struct mx3fb_data *mx3fb;
+ struct idmac_channel *idmac_channel;
+ struct dma_async_tx_descriptor *txd;
+ dma_cookie_t cookie;
+ struct scatterlist sg[2];
+
+ u32 sync; /* preserve var->sync flags */
+};
+
+static void mx3fb_dma_done(void *);
+
+/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+static unsigned long default_bpp = 16;
+
+static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
+{
+ return __raw_readl(mx3fb->reg_base + reg);
+}
+
+static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
+{
+ __raw_writel(value, mx3fb->reg_base + reg);
+}
+
+static const uint32_t di_mappings[] = {
+ 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */
+ 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */
+ 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */
+ 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */
+};
+
+static void sdc_fb_init(struct mx3fb_info *fbi)
+{
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
+
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+}
+
+/* Returns enabled flag before uninit */
+static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
+{
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
+
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+
+ return reg & SDC_COM_BG_EN;
+}
+
+static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
+{
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct dma_chan *dma_chan = &ichan->dma_chan;
+ unsigned long flags;
+ dma_cookie_t cookie;
+
+ dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+ to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+ /* This enables the channel */
+ if (mx3_fbi->cookie < 0) {
+ mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+ &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!mx3_fbi->txd) {
+ dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+ dma_chan->chan_id);
+ return;
+ }
+
+ mx3_fbi->txd->callback_param = mx3_fbi->txd;
+ mx3_fbi->txd->callback = mx3fb_dma_done;
+
+ cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+ dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ } else {
+ if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+ dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+ dma_chan->chan_id);
+ return;
+ }
+
+ /* Just re-activate the same buffer */
+ dma_async_issue_pending(dma_chan);
+ cookie = mx3_fbi->cookie;
+ dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ }
+
+ if (cookie >= 0) {
+ spin_lock_irqsave(&mx3fb->lock, flags);
+ sdc_fb_init(mx3_fbi);
+ mx3_fbi->cookie = cookie;
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
+ }
+
+ /*
+ * Attention! Without this msleep the channel keeps generating
+ * interrupts. Next sdc_set_brightness() is going to be called
+ * from mx3fb_blank().
+ */
+ msleep(2);
+}
+
+static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
+{
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ uint32_t enabled;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mx3fb->lock, flags);
+
+ enabled = sdc_fb_uninit(mx3_fbi);
+
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
+
+ mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+ mx3_fbi->txd = NULL;
+ mx3_fbi->cookie = -EINVAL;
+}
+
+/**
+ * sdc_set_window_pos() - set window position of the respective plane.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @x_pos: X coordinate relative to the top left corner to place window at.
+ * @y_pos: Y coordinate relative to the top left corner to place window at.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+ int16_t x_pos, int16_t y_pos)
+{
+ x_pos += mx3fb->h_start_width;
+ y_pos += mx3fb->v_start_width;
+
+ if (channel != IDMAC_SDC_0)
+ return -EINVAL;
+
+ mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+ return 0;
+}
+
+/**
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @mx3fb: mx3fb context.
+ * @panel: panel type.
+ * @pixel_clk: desired pixel clock frequency in Hz.
+ * @width: width of panel in pixels.
+ * @height: height of panel in pixels.
+ * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width: number of pixel clocks between the HSYNC signal pulse
+ * and the start of valid data.
+ * @h_sync_width: width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width: number of pixel clocks between the end of valid data
+ * and the HSYNC signal for next line.
+ * @v_start_width: number of lines between the VSYNC signal pulse and the
+ * start of valid data.
+ * @v_sync_width: width of the VSYNC signal in units of lines
+ * @v_end_width: number of lines between the end of valid data and the
+ * VSYNC signal for next frame.
+ * @sig: bitfield of signal polarities for LCD interface.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
+ uint32_t pixel_clk,
+ uint16_t width, uint16_t height,
+ enum pixel_fmt pixel_fmt,
+ uint16_t h_start_width, uint16_t h_sync_width,
+ uint16_t h_end_width, uint16_t v_start_width,
+ uint16_t v_sync_width, uint16_t v_end_width,
+ struct ipu_di_signal_cfg sig)
+{
+ unsigned long lock_flags;
+ uint32_t reg;
+ uint32_t old_conf;
+ uint32_t div;
+ struct clk *ipu_clk;
+
+ dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+
+ if (v_sync_width == 0 || h_sync_width == 0)
+ return -EINVAL;
+
+ /* Init panel size and blanking periods */
+ reg = ((uint32_t) (h_sync_width - 1) << 26) |
+ ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+
+#ifdef DEBUG
+ printk(KERN_CONT " hor_conf %x,", reg);
+#endif
+
+ reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+ ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+
+#ifdef DEBUG
+ printk(KERN_CONT " ver_conf %x\n", reg);
+#endif
+
+ mx3fb->h_start_width = h_start_width;
+ mx3fb->v_start_width = v_start_width;
+
+ switch (panel) {
+ case IPU_PANEL_SHARP_TFT:
+ mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+ mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+ mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ case IPU_PANEL_TFT:
+ mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Init clocking */
+
+ /*
+ * Calculate divider: fractional part is 4 bits so simply multiple by
+ * 24 to get fractional part, as long as we stay under ~250MHz and on
+ * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ */
+ dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+ ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
+ div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+ clk_put(ipu_clk);
+
+ if (div < 0x40) { /* Divider less than 4 */
+ dev_dbg(mx3fb->dev,
+ "InitPanel() - Pixel clock divider less than 4\n");
+ div = 0x40;
+ }
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ /*
+ * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+ * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+ * debug. DISP3_IF_CLK_UP_WR is 0
+ */
+ mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+ /* DI settings */
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+ old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+ sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+ sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+ sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+ sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+ sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+ sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_RGB24:
+ mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_RGB666:
+ mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_BGR666:
+ mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ default:
+ mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ }
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+ dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+ dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+ return 0;
+}
+
+/**
+ * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @enable: boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+ bool enable, uint32_t color_key)
+{
+ uint32_t reg, sdc_conf;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ if (channel == IDMAC_SDC_0)
+ sdc_conf &= ~SDC_COM_GWSEL;
+ else
+ sdc_conf |= SDC_COM_GWSEL;
+
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+ mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+ SDC_GW_CTRL);
+
+ sdc_conf |= SDC_COM_KEY_COLOR_G;
+ } else {
+ sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+ }
+ mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ return 0;
+}
+
+/**
+ * sdc_set_global_alpha() - set global alpha blending modes.
+ * @mx3fb: mx3fb context.
+ * @enable: boolean to enable or disable global alpha blending. If disabled,
+ * per pixel blending is used.
+ * @alpha: global alpha value.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
+{
+ uint32_t reg;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+ mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+ } else {
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+ }
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ return 0;
+}
+
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
+{
+ /* This might be board-specific */
+ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+ return;
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+ uint32_t pixfmt = 0;
+ switch (bpp) {
+ case 24:
+ pixfmt = IPU_PIX_FMT_BGR24;
+ break;
+ case 32:
+ pixfmt = IPU_PIX_FMT_BGR32;
+ break;
+ case 16:
+ pixfmt = IPU_PIX_FMT_RGB565;
+ break;
+ }
+ return pixfmt;
+}
+
+static int mx3fb_blank(int blank, struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_unmap_video_memory(struct fb_info *fbi);
+
+/**
+ * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
+ * @info: framebuffer information pointer
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_fix(struct fb_info *fbi)
+{
+ struct fb_fix_screeninfo *fix = &fbi->fix;
+ struct fb_var_screeninfo *var = &fbi->var;
+
+ strncpy(fix->id, "DISP3 BG", 8);
+
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+
+ return 0;
+}
+
+static void mx3fb_dma_done(void *arg)
+{
+ struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+ struct dma_chan *chan = tx_desc->txd.chan;
+ struct idmac_channel *ichannel = to_idmac_chan(chan);
+ struct mx3fb_data *mx3fb = ichannel->client;
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+
+ dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+
+ /* We only need one interrupt, it will be re-enabled as needed */
+ disable_irq(ichannel->eof_irq);
+
+ complete(&mx3_fbi->flip_cmpl);
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+ u32 mem_len;
+ struct ipu_di_signal_cfg sig_cfg;
+ enum ipu_panel mode = IPU_PANEL_TFT;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct idmac_video_param *video = &ichan->params.video;
+ struct scatterlist *sg = mx3_fbi->sg;
+ size_t screen_size;
+
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ /* Total cleanup */
+ if (mx3_fbi->txd)
+ sdc_disable_channel(mx3_fbi);
+
+ mx3fb_set_fix(fbi);
+
+ mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+ if (mem_len > fbi->fix.smem_len) {
+ if (fbi->fix.smem_start)
+ mx3fb_unmap_video_memory(fbi);
+
+ fbi->fix.smem_len = mem_len;
+ if (mx3fb_map_video_memory(fbi) < 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ return -ENOMEM;
+ }
+ }
+
+ screen_size = fbi->fix.line_length * fbi->var.yres;
+
+ sg_init_table(&sg[0], 1);
+ sg_init_table(&sg[1], 1);
+
+ sg_dma_address(&sg[0]) = fbi->fix.smem_start;
+ sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+ fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base));
+
+ if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+ memset(&sig_cfg, 0, sizeof(sig_cfg));
+ if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ sig_cfg.Hsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ sig_cfg.Vsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ sig_cfg.clk_pol = true;
+ if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+ sig_cfg.data_pol = true;
+ if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ sig_cfg.enable_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+ sig_cfg.clkidle_en = true;
+ if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+ sig_cfg.clksel_en = true;
+ if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+ mode = IPU_PANEL_SHARP_TFT;
+
+ dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+ (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+ if (sdc_init_panel(mx3fb, mode,
+ (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+ fbi->var.xres, fbi->var.yres,
+ (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+ IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+ fbi->var.left_margin,
+ fbi->var.hsync_len,
+ fbi->var.right_margin +
+ fbi->var.hsync_len,
+ fbi->var.upper_margin,
+ fbi->var.vsync_len,
+ fbi->var.lower_margin +
+ fbi->var.vsync_len, sig_cfg) != 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_err(fbi->device,
+ "mx3fb: Error initializing panel.\n");
+ return -EINVAL;
+ }
+ }
+
+ sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+ mx3_fbi->cur_ipu_buf = 0;
+
+ video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+ video->out_width = fbi->var.xres;
+ video->out_height = fbi->var.yres;
+ video->out_stride = fbi->var.xres_virtual;
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+ sdc_enable_channel(mx3_fbi);
+
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return 0;
+}
+
+/**
+ * mx3fb_check_var() - check and adjust framebuffer variable parameters.
+ * @var: framebuffer variable parameters
+ * @fbi: framebuffer information pointer
+ */
+static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 vtotal;
+ u32 htotal;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16))
+ var->bits_per_pixel = default_bpp;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+ break;
+ }
+
+ if (var->pixclock < 1000) {
+ htotal = var->xres + var->right_margin + var->hsync_len +
+ var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin;
+ var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+ var->pixclock = KHZ2PICOS(var->pixclock);
+ dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+ var->pixclock);
+ }
+
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
+
+ /* Preserve sync flags */
+ var->sync |= mx3_fbi->sync;
+ mx3_fbi->sync |= var->sync;
+
+ return 0;
+}
+
+static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int trans, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 val;
+ int ret = 1;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ mutex_lock(&mx3_fbi->mutex);
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (fbi->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (fbi->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = fbi->pseudo_palette;
+
+ val = chan_to_field(red, &fbi->var.red);
+ val |= chan_to_field(green, &fbi->var.green);
+ val |= chan_to_field(blue, &fbi->var.blue);
+
+ pal[regno] = val;
+
+ ret = 0;
+ }
+ break;
+
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return ret;
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ dev_dbg(fbi->device, "blank = %d\n", blank);
+
+ if (mx3_fbi->blank == blank)
+ return 0;
+
+ mutex_lock(&mx3_fbi->mutex);
+ mx3_fbi->blank = blank;
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
+ break;
+ case FB_BLANK_UNBLANK:
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return 0;
+}
+
+/**
+ * mx3fb_pan_display() - pan or wrap the display
+ * @var: variable screen buffer information.
+ * @info: framebuffer information pointer.
+ *
+ * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int mx3fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 y_bottom;
+ unsigned long base;
+ off_t offset;
+ dma_cookie_t cookie;
+ struct scatterlist *sg = mx3_fbi->sg;
+ struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+ struct dma_async_tx_descriptor *txd;
+ int ret;
+
+ dev_dbg(fbi->device, "%s [%c]\n", __func__,
+ list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+ if (var->xoffset > 0) {
+ dev_dbg(fbi->device, "x panning not supported\n");
+ return -EINVAL;
+ }
+
+ if (fbi->var.xoffset == var->xoffset &&
+ fbi->var.yoffset == var->yoffset)
+ return 0; /* No change, do nothing */
+
+ y_bottom = var->yoffset;
+
+ if (!(var->vmode & FB_VMODE_YWRAP))
+ y_bottom += var->yres;
+
+ if (y_bottom > fbi->var.yres_virtual)
+ return -EINVAL;
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+ (var->bits_per_pixel / 8);
+ base = fbi->fix.smem_start + offset;
+
+ dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+
+ /*
+ * We enable the End of Frame interrupt, which will free a tx-descriptor,
+ * which we will need for the next device_prep_slave_sg(). The
+ * IRQ-handler will disable the IRQ again.
+ */
+ init_completion(&mx3_fbi->flip_cmpl);
+ enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+ ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+ if (ret <= 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+ "user interrupt" : "timeout");
+ return ret ? : -ETIMEDOUT;
+ }
+
+ mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+ sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+ sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+ virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base + offset));
+
+ txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+ mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!txd) {
+ dev_err(fbi->device,
+ "Error preparing a DMA transaction descriptor.\n");
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
+
+ txd->callback_param = txd;
+ txd->callback = mx3fb_dma_done;
+
+ /*
+ * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+ * should switch to another buffer
+ */
+ cookie = txd->tx_submit(txd);
+ dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+ if (cookie < 0) {
+ dev_err(fbi->device,
+ "Error updating SDC buf %d to address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
+
+ if (mx3_fbi->txd)
+ async_tx_ack(mx3_fbi->txd);
+ mx3_fbi->txd = txd;
+
+ fbi->var.xoffset = var->xoffset;
+ fbi->var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP)
+ fbi->var.vmode |= FB_VMODE_YWRAP;
+ else
+ fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+ mutex_unlock(&mx3_fbi->mutex);
+
+ dev_dbg(fbi->device, "Update complete\n");
+
+ return 0;
+}
+
+/*
+ * This structure contains the pointers to the control functions that are
+ * invoked by the core framebuffer driver to perform operations like
+ * blitting, rectangle filling, copy regions and cursor definition.
+ */
+static struct fb_ops mx3fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_set_par = mx3fb_set_par,
+ .fb_check_var = mx3fb_check_var,
+ .fb_setcolreg = mx3fb_setcolreg,
+ .fb_pan_display = mx3fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = mx3fb_blank,
+};
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+
+/*
+ * Suspends the framebuffer and blanks the screen. Power management support
+ */
+static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 1);
+ release_console_sem();
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
+
+ }
+ return 0;
+}
+
+/*
+ * Resumes the framebuffer and unblanks the screen. Power management support
+ */
+static int mx3fb_resume(struct platform_device *pdev)
+{
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ }
+
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 0);
+ release_console_sem();
+
+ return 0;
+}
+#else
+#define mx3fb_suspend NULL
+#define mx3fb_resume NULL
+#endif
+
+/*
+ * Main framebuffer functions
+ */
+
+/**
+ * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
+ * @fbi: framebuffer information pointer
+ * @return: Error code indicating success or failure
+ *
+ * This buffer is remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the cache. Once this
+ * area is remapped, all virtual memory access to the video memory should occur
+ * at the new region.
+ */
+static int mx3fb_map_video_memory(struct fb_info *fbi)
+{
+ int retval = 0;
+ dma_addr_t addr;
+
+ fbi->screen_base = dma_alloc_writecombine(fbi->device,
+ fbi->fix.smem_len,
+ &addr, GFP_DMA);
+
+ if (!fbi->screen_base) {
+ dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+ fbi->fix.smem_len);
+ retval = -EBUSY;
+ goto err0;
+ }
+
+ fbi->fix.smem_start = addr;
+
+ dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+ (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+
+ fbi->screen_size = fbi->fix.smem_len;
+
+ /* Clear the screen */
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+ return 0;
+
+err0:
+ fbi->fix.smem_len = 0;
+ fbi->fix.smem_start = 0;
+ fbi->screen_base = NULL;
+ return retval;
+}
+
+/**
+ * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
+ * @fbi: framebuffer information pointer
+ * @return: error code indicating success or failure
+ */
+static int mx3fb_unmap_video_memory(struct fb_info *fbi)
+{
+ dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+ fbi->screen_base, fbi->fix.smem_start);
+
+ fbi->screen_base = 0;
+ fbi->fix.smem_start = 0;
+ fbi->fix.smem_len = 0;
+ return 0;
+}
+
+/**
+ * mx3fb_init_fbinfo() - initialize framebuffer information object.
+ * @return: initialized framebuffer structure.
+ */
+static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ int ret;
+
+ /* Allocate sufficient memory for the fb structure */
+ fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+ if (!fbi)
+ return NULL;
+
+ mx3fbi = fbi->par;
+ mx3fbi->cookie = -EINVAL;
+ mx3fbi->cur_ipu_buf = 0;
+
+ fbi->var.activate = FB_ACTIVATE_NOW;
+
+ fbi->fbops = ops;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = mx3fbi->pseudo_palette;
+
+ mutex_init(&mx3fbi->mutex);
+
+ /* Allocate colormap */
+ ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+ if (ret < 0) {
+ framebuffer_release(fbi);
+ return NULL;
+ }
+
+ return fbi;
+}
+
+static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
+{
+ struct device *dev = mx3fb->dev;
+ struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+ const char *name = mx3fb_pdata->name;
+ unsigned int irq;
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ const struct fb_videomode *mode;
+ int ret, num_modes;
+
+ ichan->client = mx3fb;
+ irq = ichan->eof_irq;
+
+ if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+ return -EINVAL;
+
+ fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+ if (!fbi)
+ return -ENOMEM;
+
+ if (!fb_mode)
+ fb_mode = name;
+
+ if (!fb_mode) {
+ ret = -EINVAL;
+ goto emode;
+ }
+
+ if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
+
+ if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+ num_modes, NULL, default_bpp)) {
+ ret = -EBUSY;
+ goto emode;
+ }
+
+ fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+
+ /* Default Y virtual size is 2x panel size */
+ fbi->var.yres_virtual = fbi->var.yres * 2;
+
+ mx3fb->fbi = fbi;
+
+ /* set Display Interface clock period */
+ mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+ /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+ sdc_set_brightness(mx3fb, 255);
+ sdc_set_global_alpha(mx3fb, true, 0xFF);
+ sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+
+ mx3fbi = fbi->par;
+ mx3fbi->idmac_channel = ichan;
+ mx3fbi->ipu_ch = ichan->dma_chan.chan_id;
+ mx3fbi->mx3fb = mx3fb;
+ mx3fbi->blank = FB_BLANK_NORMAL;
+
+ init_completion(&mx3fbi->flip_cmpl);
+ disable_irq(ichan->eof_irq);
+ dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+ ret = mx3fb_set_par(fbi);
+ if (ret < 0)
+ goto esetpar;
+
+ mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+
+ dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+
+ ret = register_framebuffer(fbi);
+ if (ret < 0)
+ goto erfb;
+
+ return 0;
+
+erfb:
+esetpar:
+emode:
+ fb_dealloc_cmap(&fbi->cmap);
+ framebuffer_release(fbi);
+
+ return ret;
+}
+
+static bool chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct dma_chan_request *rq = arg;
+ struct device *dev;
+ struct mx3fb_platform_data *mx3fb_pdata;
+
+ if (!rq)
+ return false;
+
+ dev = rq->mx3fb->dev;
+ mx3fb_pdata = dev->platform_data;
+
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
+}
+
+static void release_fbi(struct fb_info *fbi)
+{
+ mx3fb_unmap_video_memory(fbi);
+
+ fb_dealloc_cmap(&fbi->cmap);
+
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+}
+
+static int mx3fb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct resource *sdc_reg;
+ struct mx3fb_data *mx3fb;
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_chan_request rq;
+
+ /*
+ * Display Interface (DI) and Synchronous Display Controller (SDC)
+ * registers
+ */
+ sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!sdc_reg)
+ return -EINVAL;
+
+ mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+ if (!mx3fb)
+ return -ENOMEM;
+
+ spin_lock_init(&mx3fb->lock);
+
+ mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+ if (!mx3fb->reg_base) {
+ ret = -ENOMEM;
+ goto eremap;
+ }
+
+ pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+ mx3fb->reg_base);
+
+ /* IDMAC interface */
+ dmaengine_get();
+
+ mx3fb->dev = dev;
+ platform_set_drvdata(pdev, mx3fb);
+
+ rq.mx3fb = mx3fb;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_PRIVATE, mask);
+ rq.id = IDMAC_SDC_0;
+ chan = dma_request_channel(mask, chan_filter, &rq);
+ if (!chan) {
+ ret = -EBUSY;
+ goto ersdc0;
+ }
+
+ ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+ if (ret < 0)
+ goto eisdc0;
+
+ mx3fb->backlight_level = 255;
+
+ return 0;
+
+eisdc0:
+ dma_release_channel(chan);
+ersdc0:
+ dmaengine_put();
+ iounmap(mx3fb->reg_base);
+eremap:
+ kfree(mx3fb);
+ dev_err(dev, "mx3fb: failed to register fb\n");
+ return ret;
+}
+
+static int mx3fb_remove(struct platform_device *dev)
+{
+ struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+ struct fb_info *fbi = mx3fb->fbi;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct dma_chan *chan;
+
+ chan = &mx3_fbi->idmac_channel->dma_chan;
+ release_fbi(fbi);
+
+ dma_release_channel(chan);
+ dmaengine_put();
+
+ iounmap(mx3fb->reg_base);
+ kfree(mx3fb);
+ return 0;
+}
+
+static struct platform_driver mx3fb_driver = {
+ .driver = {
+ .name = MX3FB_NAME,
+ },
+ .probe = mx3fb_probe,
+ .remove = mx3fb_remove,
+ .suspend = mx3fb_suspend,
+ .resume = mx3fb_resume,
+};
+
+/*
+ * Parse user specified options (`video=mx3fb:')
+ * example:
+ * video=mx3fb:bpp=16
+ */
+static int mx3fb_setup(void)
+{
+#ifndef MODULE
+ char *opt, *options = NULL;
+
+ if (fb_get_options("mx3fb", &options))
+ return -ENODEV;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ if (!strncmp(opt, "bpp=", 4))
+ default_bpp = simple_strtoul(opt + 4, NULL, 0);
+ else
+ fb_mode = opt;
+ }
+#endif
+
+ return 0;
+}
+
+static int __init mx3fb_init(void)
+{
+ int ret = mx3fb_setup();
+
+ if (ret < 0)
+ return ret;
+
+ ret = platform_driver_register(&mx3fb_driver);
+ return ret;
+}
+
+static void __exit mx3fb_exit(void)
+{
+ platform_driver_unregister(&mx3fb_driver);
+}
+
+module_init(mx3fb_init);
+module_exit(mx3fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MX3 framebuffer driver");
+MODULE_ALIAS("platform:" MX3FB_NAME);
+MODULE_LICENSE("GPL v2");
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_HW_B_NVIDIA;
chan->adapter.class = i2c_class;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pci_dev->dev;
/* FIXME:
* According to errata some platforms have a clock rate limitiation
*/
- lcdc.lcd_ck = clk_get(NULL, "lcd_ck");
+ lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
if (IS_ERR(lcdc.lcd_ck)) {
dev_err(fbdev->dev, "unable to access LCD clock\n");
r = PTR_ERR(lcdc.lcd_ck);
goto fail0;
}
- tc_ck = clk_get(NULL, "tc_ck");
+ tc_ck = clk_get(fbdev->dev, "tc_ck");
if (IS_ERR(tc_ck)) {
dev_err(fbdev->dev, "unable to access TC clock\n");
r = PTR_ERR(tc_ck);
if (chan->par) {
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
- chan->adapter.id = I2C_HW_B_SAVAGE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pcidev->dev;
chan->algo.udelay = 10;
config OMAP_WATCHDOG
tristate "OMAP Watchdog"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
- Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to
- enable the OMAP1610/OMAP1710 watchdog timer.
+ Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y'
+ here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
config PNX4008_WATCHDOG
tristate "PNX4008 Watchdog"
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
frame_list[i] = pfn_to_mfn(pfn);
scrub_page(page);
+
+ if (!PageHighMem(page)) {
+ ret = HYPERVISOR_update_va_mapping(
+ (unsigned long)__va(pfn << PAGE_SHIFT),
+ __pte_ma(0), 0);
+ BUG_ON(ret);
+ }
+
}
/* Ensure that ballooned highmem pages don't have kmaps. */
static int xenbus_write_transaction(unsigned msg_type,
struct xenbus_file_priv *u)
{
- int rc, ret;
+ int rc;
void *reply;
struct xenbus_transaction_holder *trans = NULL;
LIST_HEAD(staging_q);
}
mutex_lock(&u->reply_mutex);
- ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
- if (!ret)
- ret = queue_reply(&staging_q, reply, u->u.msg.len);
- if (!ret) {
+ rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
+ if (!rc)
+ rc = queue_reply(&staging_q, reply, u->u.msg.len);
+ if (!rc) {
list_splice_tail(&staging_q, &u->read_buffers);
wake_up(&u->read_waitq);
} else {
queue_cleanup(&staging_q);
- rc = ret;
}
mutex_unlock(&u->reply_mutex);
--- /dev/null
+config 9P_FS
+ tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+ depends on INET && NET_9P && EXPERIMENTAL
+ help
+ If you say Y here, you will get experimental support for
+ Plan 9 resource sharing via the 9P2000 protocol.
+
+ See <http://v9fs.sf.net> for more information.
+
+ If unsure, say N.
default y if EXT4_FS=y && EXT4_FS_XATTR
default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
-config REISERFS_FS
- tristate "Reiserfs support"
- help
- Stores not just filenames but the files themselves in a balanced
- tree. Uses journalling.
-
- Balanced trees are more efficient than traditional file system
- architectural foundations.
-
- In general, ReiserFS is as fast as ext2, but is very efficient with
- large directories and small files. Additional patches are needed
- for NFS and quotas, please see <http://www.namesys.com/> for links.
-
- It is more easily extended to have features currently found in
- database and keyword search systems than block allocation based file
- systems are. The next version will be so extended, and will support
- plugins consistent with our motto ``It takes more than a license to
- make source code open.''
-
- Read <http://www.namesys.com/> to learn more about reiserfs.
-
- Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
- If you like it, you can pay us to add new features to it that you
- need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
- bool "Enable reiserfs debug mode"
- depends on REISERFS_FS
- help
- If you set this to Y, then ReiserFS will perform every check it can
- possibly imagine of its internal consistency throughout its
- operation. It will also go substantially slower. More than once we
- have forgotten that this was on, and then gone despondent over the
- latest benchmarks.:-) Use of this option allows our team to go all
- out in checking for consistency when debugging without fear of its
- effect on end users. If you are on the verge of sending in a bug
- report, say Y and you might get a useful error message. Almost
- everyone should say N.
-
-config REISERFS_PROC_INFO
- bool "Stats in /proc/fs/reiserfs"
- depends on REISERFS_FS && PROC_FS
- help
- Create under /proc/fs/reiserfs a hierarchy of files, displaying
- various ReiserFS statistics and internal data at the expense of
- making your kernel or module slightly larger (+8 KB). This also
- increases the amount of kernel memory required for each mount.
- Almost everyone but ReiserFS developers and people fine-tuning
- reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
- bool "ReiserFS extended attributes"
- depends on REISERFS_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
- bool "ReiserFS POSIX Access Control Lists"
- depends on REISERFS_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config REISERFS_FS_SECURITY
- bool "ReiserFS Security Labels"
- depends on REISERFS_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ReiserFS filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFS_FS
- tristate "JFS filesystem support"
- select NLS
- help
- This is a port of IBM's Journaled Filesystem . More information is
- available in the file <file:Documentation/filesystems/jfs.txt>.
-
- If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
- bool "JFS POSIX Access Control Lists"
- depends on JFS_FS
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
- bool "JFS Security Labels"
- depends on JFS_FS
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jfs filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFS_DEBUG
- bool "JFS debugging"
- depends on JFS_FS
- help
- If you are experiencing any problems with the JFS filesystem, say
- Y here. This will result in additional debugging messages to be
- written to the system log. Under normal circumstances, this
- results in very little overhead.
-
-config JFS_STATISTICS
- bool "JFS statistics"
- depends on JFS_FS
- help
- Enabling this option will cause statistics from the JFS file system
- to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
config FS_POSIX_ACL
# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
source "fs/xfs/Kconfig"
source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
- tristate "OCFS2 file system support"
- depends on NET && SYSFS
- select CONFIGFS_FS
- select JBD2
- select CRC32
- select QUOTA
- select QUOTA_TREE
- help
- OCFS2 is a general purpose extent based shared disk cluster file
- system with many similarities to ext3. It supports 64 bit inode
- numbers, and has automatically extending metadata groups which may
- also make it attractive for non-clustered use.
-
- You'll want to install the ocfs2-tools package in order to at least
- get "mount.ocfs2".
-
- Project web page: http://oss.oracle.com/projects/ocfs2
- Tools web page: http://oss.oracle.com/projects/ocfs2-tools
- OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
- For more information on OCFS2, see the file
- <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
- tristate "O2CB Kernelspace Clustering"
- depends on OCFS2_FS
- default y
- help
- OCFS2 includes a simple kernelspace clustering package, the OCFS2
- Cluster Base. It only requires a very small userspace component
- to configure it. This comes with the standard ocfs2-tools package.
- O2CB is limited to maintaining a cluster for OCFS2 file systems.
- It cannot manage any other cluster applications.
-
- It is always safe to say Y here, as the clustering method is
- run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
- tristate "OCFS2 Userspace Clustering"
- depends on OCFS2_FS && DLM
- default y
- help
- This option will allow OCFS2 to use userspace clustering services
- in conjunction with the DLM in fs/dlm. If you are using a
- userspace cluster manager, say Y here.
-
- It is safe to say Y, as the clustering method is run-time
- selectable.
-
-config OCFS2_FS_STATS
- bool "OCFS2 statistics"
- depends on OCFS2_FS
- default y
- help
- This option allows some fs statistics to be captured. Enabling
- this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
- bool "OCFS2 logging support"
- depends on OCFS2_FS
- default y
- help
- The ocfs2 filesystem has an extensive logging system. The system
- allows selection of events to log via files in /sys/o2cb/logmask/.
- This option will enlarge your kernel, but it allows debugging of
- ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
- bool "OCFS2 expensive checks"
- depends on OCFS2_FS
- default n
- help
- This option will enable expensive consistency checks. Enable
- this option for debugging only as it is likely to decrease
- performance of the filesystem.
-
-config OCFS2_FS_POSIX_ACL
- bool "OCFS2 POSIX Access Control Lists"
- depends on OCFS2_FS
- select FS_POSIX_ACL
- default n
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
-config BTRFS_FS
- tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
- depends on EXPERIMENTAL
- select LIBCRC32C
- select ZLIB_INFLATE
- select ZLIB_DEFLATE
- help
- Btrfs is a new filesystem with extents, writable snapshotting,
- support for multiple devices and many more features.
-
- Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
- FINALIZED. You should say N here unless you are interested in
- testing Btrfs with non-critical data.
-
- To compile this file system support as a module, choose M here. The
- module will be called btrfs.
-
- If unsure, say N.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
endif # BLOCK
depends on XFS_QUOTA || QUOTA
default y
-config AUTOFS_FS
- tristate "Kernel automounter support"
- help
- The automounter is a tool to automatically mount remote file systems
- on demand. This implementation is partially kernel-based to reduce
- overhead in the already-mounted case; this is unlike the BSD
- automounter (amd), which is a pure user space daemon.
-
- To use the automounter you need the user-space tools from the autofs
- package; you can find the location in <file:Documentation/Changes>.
- You also want to answer Y to "NFS file system support", below.
-
- If you want to use the newer version of the automounter with more
- features, say N here and say Y to "Kernel automounter v4 support",
- below.
-
- To compile this support as a module, choose M here: the module will be
- called autofs.
-
- If you are not a part of a fairly large, distributed network, you
- probably do not need an automounter, and can say N here.
-
-config AUTOFS4_FS
- tristate "Kernel automounter version 4 support (also supports v3)"
- help
- The automounter is a tool to automatically mount remote file systems
- on demand. This implementation is partially kernel-based to reduce
- overhead in the already-mounted case; this is unlike the BSD
- automounter (amd), which is a pure user space daemon.
-
- To use the automounter you need the user-space tools from
- <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
- want to answer Y to "NFS file system support", below.
-
- To compile this support as a module, choose M here: the module will be
- called autofs4. You will need to add "alias autofs autofs4" to your
- modules configuration file.
-
- If you are not a part of a fairly large, distributed network or
- don't have a laptop which needs to dynamically reconfigure to the
- local network, you probably do not need an automounter, and can say
- N here.
-
-config FUSE_FS
- tristate "FUSE (Filesystem in Userspace) support"
- help
- With FUSE it is possible to implement a fully functional filesystem
- in a userspace program.
-
- There's also companion library: libfuse. This library along with
- utilities is available from the FUSE homepage:
- <http://fuse.sourceforge.net/>
-
- See <file:Documentation/filesystems/fuse.txt> for more information.
- See <file:Documentation/Changes> for needed library/utility version.
-
- If you want to develop a userspace FS, or if you want to use
- a filesystem based on FUSE, answer Y or M.
+source "fs/autofs/Kconfig"
+source "fs/autofs4/Kconfig"
+source "fs/fuse/Kconfig"
config GENERIC_ACL
bool
if BLOCK
menu "CD-ROM/DVD Filesystems"
-config ISO9660_FS
- tristate "ISO 9660 CDROM file system support"
- help
- This is the standard file system used on CD-ROMs. It was previously
- known as "High Sierra File System" and is called "hsfs" on other
- Unix systems. The so-called Rock-Ridge extensions which allow for
- long Unix filenames and symbolic links are also supported by this
- driver. If you have a CD-ROM drive and want to do more with it than
- just listen to audio CDs and watch its LEDs, say Y (and read
- <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>), thereby
- enlarging your kernel by about 27 KB; otherwise say N.
-
- To compile this file system support as a module, choose M here: the
- module will be called isofs.
-
-config JOLIET
- bool "Microsoft Joliet CDROM extensions"
- depends on ISO9660_FS
- select NLS
- help
- Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
- which allows for long filenames in unicode format (unicode is the
- new 16 bit character code, successor to ASCII, which encodes the
- characters of almost all languages of the world; see
- <http://www.unicode.org/> for more information). Say Y here if you
- want to be able to read Joliet CD-ROMs under Linux.
-
-config ZISOFS
- bool "Transparent decompression extension"
- depends on ISO9660_FS
- select ZLIB_INFLATE
- help
- This is a Linux-specific extension to RockRidge which lets you store
- data in compressed form on a CD-ROM and have it transparently
- decompressed when the CD-ROM is accessed. See
- <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
- necessary to create such a filesystem. Say Y here if you want to be
- able to read such compressed CD-ROMs.
-
-config UDF_FS
- tristate "UDF file system support"
- select CRC_ITU_T
- help
- This is the new file system used on some CD-ROMs and DVDs. Say Y if
- you intend to mount DVD discs or CDRW's written in packet mode, or
- if written to by other UDF utilities, such as DirectCD.
- Please read <file:Documentation/filesystems/udf.txt>.
-
- To compile this file system support as a module, choose M here: the
- module will be called udf.
-
- If unsure, say N.
-
-config UDF_NLS
- bool
- default y
- depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+source "fs/isofs/Kconfig"
+source "fs/udf/Kconfig"
endmenu
endif # BLOCK
if BLOCK
menu "DOS/FAT/NT Filesystems"
-config FAT_FS
- tristate
- select NLS
- help
- If you want to use one of the FAT-based file systems (the MS-DOS and
- VFAT (Windows 95) file systems), then you must say Y or M here
- to include FAT support. You will then be able to mount partitions or
- diskettes with FAT-based file systems and transparently access the
- files on them, i.e. MSDOS files will look and behave just like all
- other Unix files.
-
- This FAT support is not a file system in itself, it only provides
- the foundation for the other file systems. You will have to say Y or
- M to at least one of "MSDOS fs support" or "VFAT fs support" in
- order to make use of it.
-
- Another way to read and write MSDOS floppies and hard drive
- partitions from within Linux (but not transparently) is with the
- mtools ("man mtools") program suite. You don't need to say Y here in
- order to do that.
-
- If you need to move large files on floppies between a DOS and a
- Linux box, say Y here, mount the floppy under Linux with an MSDOS
- file system and use GNU tar's M option. GNU tar is a program
- available for Unix and DOS ("man tar" or "info tar").
-
- The FAT support will enlarge your kernel by about 37 KB. If unsure,
- say Y.
-
- To compile this as a module, choose M here: the module will be called
- fat. Note that if you compile the FAT support as a module, you
- cannot compile any of the FAT-based file systems into the kernel
- -- they will have to be modules as well.
-
-config MSDOS_FS
- tristate "MSDOS fs support"
- select FAT_FS
- help
- This allows you to mount MSDOS partitions of your hard drive (unless
- they are compressed; to access compressed MSDOS partitions under
- Linux, you can either use the DOS emulator DOSEMU, described in the
- DOSEMU-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
- <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
- intend to use dosemu with a non-compressed MSDOS partition, say Y
- here) and MSDOS floppies. This means that file access becomes
- transparent, i.e. the MSDOS files look and behave just like all
- other Unix files.
-
- If you have Windows 95 or Windows NT installed on your MSDOS
- partitions, you should use the VFAT file system (say Y to "VFAT fs
- support" below), or you will not be able to see the long filenames
- generated by Windows 95 / Windows NT.
-
- This option will enlarge your kernel by about 7 KB. If unsure,
- answer Y. This will only work if you said Y to "DOS FAT fs support"
- as well. To compile this as a module, choose M here: the module will
- be called msdos.
-
-config VFAT_FS
- tristate "VFAT (Windows-95) fs support"
- select FAT_FS
- help
- This option provides support for normal Windows file systems with
- long filenames. That includes non-compressed FAT-based file systems
- used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
- programs from the mtools package.
-
- The VFAT support enlarges your kernel by about 10 KB and it only
- works if you said Y to the "DOS FAT fs support" above. Please read
- the file <file:Documentation/filesystems/vfat.txt> for details. If
- unsure, say Y.
-
- To compile this as a module, choose M here: the module will be called
- vfat.
-
-config FAT_DEFAULT_CODEPAGE
- int "Default codepage for FAT"
- depends on MSDOS_FS || VFAT_FS
- default 437
- help
- This option should be set to the codepage of your FAT filesystems.
- It can be overridden with the "codepage" mount option.
- See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
- string "Default iocharset for FAT"
- depends on VFAT_FS
- default "iso8859-1"
- help
- Set this to the default input/output character set you'd
- like FAT to use. It should probably match the character set
- that most of your FAT filesystems use, and can be overridden
- with the "iocharset" mount option for FAT filesystems.
- Note that "utf8" is not recommended for FAT filesystems.
- If unsure, you shouldn't set "utf8" here.
- See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config NTFS_FS
- tristate "NTFS file system support"
- select NLS
- help
- NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
-
- Saying Y or M here enables read support. There is partial, but
- safe, write support available. For write support you must also
- say Y to "NTFS write support" below.
-
- There are also a number of user-space tools available, called
- ntfsprogs. These include ntfsundelete and ntfsresize, that work
- without NTFS support enabled in the kernel.
-
- This is a rewrite from scratch of Linux NTFS support and replaced
- the old NTFS code starting with Linux 2.5.11. A backport to
- the Linux 2.4 kernel series is separately available as a patch
- from the project web site.
-
- For more information see <file:Documentation/filesystems/ntfs.txt>
- and <http://www.linux-ntfs.org/>.
-
- To compile this file system support as a module, choose M here: the
- module will be called ntfs.
-
- If you are not using Windows NT, 2000, XP or 2003 in addition to
- Linux on your computer it is safe to say N.
-
-config NTFS_DEBUG
- bool "NTFS debugging support"
- depends on NTFS_FS
- help
- If you are experiencing any problems with the NTFS file system, say
- Y here. This will result in additional consistency checks to be
- performed by the driver as well as additional debugging messages to
- be written to the system log. Note that debugging messages are
- disabled by default. To enable them, supply the option debug_msgs=1
- at the kernel command line when booting the kernel or as an option
- to insmod when loading the ntfs module. Once the driver is active,
- you can enable debugging messages by doing (as root):
- echo 1 > /proc/sys/fs/ntfs-debug
- Replacing the "1" with "0" would disable debug messages.
-
- If you leave debugging messages disabled, this results in little
- overhead, but enabling debug messages results in very significant
- slowdown of the system.
-
- When reporting bugs, please try to have available a full dump of
- debugging messages while the misbehaviour was occurring.
-
-config NTFS_RW
- bool "NTFS write support"
- depends on NTFS_FS
- help
- This enables the partial, but safe, write support in the NTFS driver.
-
- The only supported operation is overwriting existing files, without
- changing the file length. No file or directory creation, deletion or
- renaming is possible. Note only non-resident files can be written to
- so you may find that some very small files (<500 bytes or so) cannot
- be written to.
-
- While we cannot guarantee that it will not damage any data, we have
- so far not received a single report where the driver would have
- damaged someones data so we assume it is perfectly safe to use.
-
- Note: While write support is safe in this version (a rewrite from
- scratch of the NTFS support), it should be noted that the old NTFS
- write support, included in Linux 2.5.10 and before (since 1997),
- is not safe.
-
- This is currently useful with TopologiLinux. TopologiLinux is run
- on top of any DOS/Microsoft Windows system without partitioning your
- hard disk. Unlike other Linux distributions TopologiLinux does not
- need its own partition. For more information see
- <http://topologi-linux.sourceforge.net/>
-
- It is perfectly safe to say N here.
+source "fs/fat/Kconfig"
+source "fs/ntfs/Kconfig"
endmenu
endif # BLOCK
menu "Pseudo filesystems"
source "fs/proc/Kconfig"
-
-config SYSFS
- bool "sysfs file system support" if EMBEDDED
- default y
- help
- The sysfs filesystem is a virtual filesystem that the kernel uses to
- export internal kernel objects, their attributes, and their
- relationships to one another.
-
- Users can use sysfs to ascertain useful information about the running
- kernel, such as the devices the kernel has discovered on each bus and
- which driver each is bound to. sysfs can also be used to tune devices
- and other kernel subsystems.
-
- Some system agents rely on the information in sysfs to operate.
- /sbin/hotplug uses device and object attributes in sysfs to assist in
- delegating policy decisions, like persistently naming devices.
-
- sysfs is currently used by the block subsystem to mount the root
- partition. If sysfs is disabled you must specify the boot device on
- the kernel boot command line via its major and minor numbers. For
- example, "root=03:01" for /dev/hda1.
-
- Designers of embedded systems may wish to say N here to conserve space.
+source "fs/sysfs/Kconfig"
config TMPFS
bool "Virtual memory file system support (former shm fs)"
config HUGETLB_PAGE
def_bool HUGETLBFS
-config CONFIGFS_FS
- tristate "Userspace-driven configuration filesystem"
- depends on SYSFS
- help
- configfs is a ram-based filesystem that provides the converse
- of sysfs's functionality. Where sysfs is a filesystem-based
- view of kernel objects, configfs is a filesystem-based manager
- of kernel objects, or config_items.
-
- Both sysfs and configfs can and should exist together on the
- same system. One is not a replacement for the other.
+source "fs/configfs/Kconfig"
endmenu
if MISC_FILESYSTEMS
-config ADFS_FS
- tristate "ADFS file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- The Acorn Disc Filing System is the standard file system of the
- RiscOS operating system which runs on Acorn's ARM-based Risc PC
- systems and the Acorn Archimedes range of machines. If you say Y
- here, Linux will be able to read from ADFS partitions on hard drives
- and from ADFS-formatted floppy discs. If you also want to be able to
- write to those devices, say Y to "ADFS write support" below.
-
- The ADFS partition should be the first partition (i.e.,
- /dev/[hs]d?1) on each of your drives. Please read the file
- <file:Documentation/filesystems/adfs.txt> for further details.
-
- To compile this code as a module, choose M here: the module will be
- called adfs.
-
- If unsure, say N.
-
-config ADFS_FS_RW
- bool "ADFS write support (DANGEROUS)"
- depends on ADFS_FS
- help
- If you say Y here, you will be able to write to ADFS partitions on
- hard drives and ADFS-formatted floppy disks. This is experimental
- codes, so if you're unsure, say N.
-
-config AFFS_FS
- tristate "Amiga FFS file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- The Fast File System (FFS) is the common file system used on hard
- disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
- if you want to be able to read and write files from and to an Amiga
- FFS partition on your hard drive. Amiga floppies however cannot be
- read with this driver due to an incompatibility of the floppy
- controller used in an Amiga and the standard floppy controller in
- PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
- and <file:fs/affs/Changes>.
-
- With this driver you can also mount disk files used by Bernd
- Schmidt's Un*X Amiga Emulator
- (<http://www.freiburg.linux.de/~uae/>).
- If you want to do this, you will also need to say Y or M to "Loop
- device support", above.
-
- To compile this file system support as a module, choose M here: the
- module will be called affs. If unsure, say N.
-
-config ECRYPT_FS
- tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && KEYS && CRYPTO && NET
- help
- Encrypted filesystem that operates on the VFS layer. See
- <file:Documentation/filesystems/ecryptfs.txt> to learn more about
- eCryptfs. Userspace components are required and can be
- obtained from <http://ecryptfs.sf.net>.
-
- To compile this file system support as a module, choose M here: the
- module will be called ecryptfs.
-
-config HFS_FS
- tristate "Apple Macintosh file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- select NLS
- help
- If you say Y here, you will be able to mount Macintosh-formatted
- floppy disks and hard drive partitions with full read-write access.
- Please read <file:Documentation/filesystems/hfs.txt> to learn about
- the available mount options.
-
- To compile this file system support as a module, choose M here: the
- module will be called hfs.
-
-config HFSPLUS_FS
- tristate "Apple Extended HFS file system support"
- depends on BLOCK
- select NLS
- select NLS_UTF8
- help
- If you say Y here, you will be able to mount extended format
- Macintosh-formatted hard drive partitions with full read-write access.
-
- This file system is often called HFS+ and was introduced with
- MacOS 8. It includes all Mac specific filesystem data such as
- data forks and creator codes, but it also has several UNIX
- style features such as file ownership and permissions.
-
-config BEFS_FS
- tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- select NLS
- help
- The BeOS File System (BeFS) is the native file system of Be, Inc's
- BeOS. Notable features include support for arbitrary attributes
- on files and directories, and database-like indices on selected
- attributes. (Also note that this driver doesn't make those features
- available at this time). It is a 64 bit filesystem, so it supports
- extremely large volumes and files.
-
- If you use this filesystem, you should also say Y to at least one
- of the NLS (native language support) options below.
-
- If you don't know what this is about, say N.
-
- To compile this as a module, choose M here: the module will be
- called befs.
-
-config BEFS_DEBUG
- bool "Debug BeFS"
- depends on BEFS_FS
- help
- If you say Y here, you can use the 'debug' mount option to enable
- debugging output from the driver.
-
-config BFS_FS
- tristate "BFS file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- Boot File System (BFS) is a file system used under SCO UnixWare to
- allow the bootloader access to the kernel image and other important
- files during the boot process. It is usually mounted under /stand
- and corresponds to the slice marked as "STAND" in the UnixWare
- partition. You should say Y if you want to read or write the files
- on your /stand slice from within Linux. You then also need to say Y
- to "UnixWare slices support", below. More information about the BFS
- file system is contained in the file
- <file:Documentation/filesystems/bfs.txt>.
-
- If you don't know what this is about, say N.
-
- To compile this as a module, choose M here: the module will be called
- bfs. Note that the file system of your root partition (the one
- containing the directory /) cannot be compiled as a module.
-
-
-
-config EFS_FS
- tristate "EFS file system support (read only) (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- EFS is an older file system used for non-ISO9660 CD-ROMs and hard
- disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
- uses the XFS file system for hard disk partitions however).
-
- This implementation only offers read-only access. If you don't know
- what all this is about, it's safe to say N. For more information
- about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
- To compile the EFS file system support as a module, choose M here: the
- module will be called efs.
-
+source "fs/adfs/Kconfig"
+source "fs/affs/Kconfig"
+source "fs/ecryptfs/Kconfig"
+source "fs/hfs/Kconfig"
+source "fs/hfsplus/Kconfig"
+source "fs/befs/Kconfig"
+source "fs/bfs/Kconfig"
+source "fs/efs/Kconfig"
source "fs/jffs2/Kconfig"
# UBIFS File system configuration
source "fs/ubifs/Kconfig"
-
-config CRAMFS
- tristate "Compressed ROM file system support (cramfs)"
- depends on BLOCK
- select ZLIB_INFLATE
- help
- Saying Y here includes support for CramFs (Compressed ROM File
- System). CramFs is designed to be a simple, small, and compressed
- file system for ROM based embedded systems. CramFs is read-only,
- limited to 256MB file systems (with 16MB files), and doesn't support
- 16/32 bits uid/gid, hard links and timestamps.
-
- See <file:Documentation/filesystems/cramfs.txt> and
- <file:fs/cramfs/README> for further information.
-
- To compile this as a module, choose M here: the module will be called
- cramfs. Note that the root file system (the one containing the
- directory /) cannot be compiled as a module.
-
- If unsure, say N.
-
-config SQUASHFS
- tristate "SquashFS 4.0 - Squashed file system support"
- depends on BLOCK
- select ZLIB_INFLATE
- help
- Saying Y here includes support for SquashFS 4.0 (a Compressed
- Read-Only File System). Squashfs is a highly compressed read-only
- filesystem for Linux. It uses zlib compression to compress both
- files, inodes and directories. Inodes in the system are very small
- and all blocks are packed to minimise data overhead. Block sizes
- greater than 4K are supported up to a maximum of 1 Mbytes (default
- block size 128K). SquashFS 4.0 supports 64 bit filesystems and files
- (larger than 4GB), full uid/gid information, hard links and
- timestamps.
-
- Squashfs is intended for general read-only filesystem use, for
- archival use (i.e. in cases where a .tar.gz file may be used), and in
- embedded systems where low overhead is needed. Further information
- and tools are available from http://squashfs.sourceforge.net.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called squashfs. Note that the root file system (the one
- containing the directory /) cannot be compiled as a module.
-
- If unsure, say N.
-
-config SQUASHFS_EMBEDDED
-
- bool "Additional option for memory-constrained systems"
- depends on SQUASHFS
- default n
- help
- Saying Y here allows you to specify cache size.
-
- If unsure, say N.
-
-config SQUASHFS_FRAGMENT_CACHE_SIZE
- int "Number of fragments cached" if SQUASHFS_EMBEDDED
- depends on SQUASHFS
- default "3"
- help
- By default SquashFS caches the last 3 fragments read from
- the filesystem. Increasing this amount may mean SquashFS
- has to re-read fragments less often from disk, at the expense
- of extra system memory. Decreasing this amount will mean
- SquashFS uses less memory at the expense of extra reads from disk.
-
- Note there must be at least one cached fragment. Anything
- much more than three will probably not make much difference.
-
-config VXFS_FS
- tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
- depends on BLOCK
- help
- FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
- file system format. VERITAS VxFS(TM) is the standard file system
- of SCO UnixWare (and possibly others) and optionally available
- for Sunsoft Solaris, HP-UX and many other operating systems.
- Currently only readonly access is supported.
-
- NOTE: the file system type as used by mount(1), mount(2) and
- fstab(5) is 'vxfs' as it describes the file system format, not
- the actual driver.
-
- To compile this as a module, choose M here: the module will be
- called freevxfs. If unsure, say N.
-
-config MINIX_FS
- tristate "Minix file system support"
- depends on BLOCK
- help
- Minix is a simple operating system used in many classes about OS's.
- The minix file system (method to organize files on a hard disk
- partition or a floppy disk) was the original file system for Linux,
- but has been superseded by the second extended file system ext2fs.
- You don't want to use the minix file system on your hard disk
- because of certain built-in restrictions, but it is sometimes found
- on older Linux floppy disks. This option will enlarge your kernel
- by about 28 KB. If unsure, say N.
-
- To compile this file system support as a module, choose M here: the
- module will be called minix. Note that the file system of your root
- partition (the one containing the directory /) cannot be compiled as
- a module.
-
-config OMFS_FS
- tristate "SonicBlue Optimized MPEG File System support"
- depends on BLOCK
- select CRC_ITU_T
- help
- This is the proprietary file system used by the Rio Karma music
- player and ReplayTV DVR. Despite the name, this filesystem is not
- more efficient than a standard FS for MPEG files, in fact likely
- the opposite is true. Say Y if you have either of these devices
- and wish to mount its disk.
-
- To compile this file system support as a module, choose M here: the
- module will be called omfs. If unsure, say N.
-
-config HPFS_FS
- tristate "OS/2 HPFS file system support"
- depends on BLOCK
- help
- OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
- is the file system used for organizing files on OS/2 hard disk
- partitions. Say Y if you want to be able to read files from and
- write files to an OS/2 HPFS partition on your hard drive. OS/2
- floppies however are in regular MSDOS format, so you don't need this
- option in order to be able to read them. Read
- <file:Documentation/filesystems/hpfs.txt>.
-
- To compile this file system support as a module, choose M here: the
- module will be called hpfs. If unsure, say N.
-
-
-config QNX4FS_FS
- tristate "QNX4 file system support (read only)"
- depends on BLOCK
- help
- This is the file system used by the real-time operating systems
- QNX 4 and QNX 6 (the latter is also called QNX RTP).
- Further information is available at <http://www.qnx.com/>.
- Say Y if you intend to mount QNX hard disks or floppies.
- Unless you say Y to "QNX4FS read-write support" below, you will
- only be able to read these file systems.
-
- To compile this file system support as a module, choose M here: the
- module will be called qnx4.
-
- If you don't know whether you need it, then you don't need it:
- answer N.
-
-config QNX4FS_RW
- bool "QNX4FS write support (DANGEROUS)"
- depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
- help
- Say Y if you want to test write support for QNX4 file systems.
-
- It's currently broken, so for now:
- answer N.
-
-config ROMFS_FS
- tristate "ROM file system support"
- depends on BLOCK
- ---help---
- This is a very small read-only file system mainly intended for
- initial ram disks of installation disks, but it could be used for
- other read-only media as well. Read
- <file:Documentation/filesystems/romfs.txt> for details.
-
- To compile this file system support as a module, choose M here: the
- module will be called romfs. Note that the file system of your
- root partition (the one containing the directory /) cannot be a
- module.
-
- If you don't know whether you need it, then you don't need it:
- answer N.
-
-
-config SYSV_FS
- tristate "System V/Xenix/V7/Coherent file system support"
- depends on BLOCK
- help
- SCO, Xenix and Coherent are commercial Unix systems for Intel
- machines, and Version 7 was used on the DEC PDP-11. Saying Y
- here would allow you to read from their floppies and hard disk
- partitions.
-
- If you have floppies or hard disk partitions like that, it is likely
- that they contain binaries from those other Unix systems; in order
- to run these binaries, you will want to install linux-abi which is
- a set of kernel modules that lets you run SCO, Xenix, Wyse,
- UnixWare, Dell Unix and System V programs under Linux. It is
- available via FTP (user: ftp) from
- <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
- NOTE: that will work only for binaries from Intel-based systems;
- PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
- If you only intend to mount files from some other Unix over the
- network using NFS, you don't need the System V file system support
- (but you need NFS file system support obviously).
-
- Note that this option is generally not needed for floppies, since a
- good portable way to transport files and directories between unixes
- (and even other operating systems) is given by the tar program ("man
- tar" or preferably "info tar"). Note also that this option has
- nothing whatsoever to do with the option "System V IPC". Read about
- the System V file system in
- <file:Documentation/filesystems/sysv-fs.txt>.
- Saying Y here will enlarge your kernel by about 27 KB.
-
- To compile this as a module, choose M here: the module will be called
- sysv.
-
- If you haven't heard about all of this before, it's safe to say N.
-
-
-config UFS_FS
- tristate "UFS file system support (read only)"
- depends on BLOCK
- help
- BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
- OpenBSD and NeXTstep) use a file system called UFS. Some System V
- Unixes can create and mount hard disk partitions and diskettes using
- this file system as well. Saying Y here will allow you to read from
- these partitions; if you also want to write to them, say Y to the
- experimental "UFS file system write support", below. Please read the
- file <file:Documentation/filesystems/ufs.txt> for more information.
-
- The recently released UFS2 variant (used in FreeBSD 5.x) is
- READ-ONLY supported.
-
- Note that this option is generally not needed for floppies, since a
- good portable way to transport files and directories between unixes
- (and even other operating systems) is given by the tar program ("man
- tar" or preferably "info tar").
-
- When accessing NeXTstep files, you may need to convert them from the
- NeXT character set to the Latin1 character set; use the program
- recode ("info recode") for this purpose.
-
- To compile the UFS file system support as a module, choose M here: the
- module will be called ufs.
-
- If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
- bool "UFS file system write support (DANGEROUS)"
- depends on UFS_FS && EXPERIMENTAL
- help
- Say Y here if you want to try writing to UFS partitions. This is
- experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
- bool "UFS debugging"
- depends on UFS_FS
- help
- If you are experiencing any problems with the UFS filesystem, say
- Y here. This will result in _many_ additional debugging messages to be
- written to the system log.
+source "fs/cramfs/Kconfig"
+source "fs/squashfs/Kconfig"
+source "fs/freevxfs/Kconfig"
+source "fs/minix/Kconfig"
+source "fs/omfs/Kconfig"
+source "fs/hpfs/Kconfig"
+source "fs/qnx4/Kconfig"
+source "fs/romfs/Kconfig"
+source "fs/sysv/Kconfig"
+source "fs/ufs/Kconfig"
endif # MISC_FILESYSTEMS
if NETWORK_FILESYSTEMS
-config NFS_FS
- tristate "NFS client support"
- depends on INET
- select LOCKD
- select SUNRPC
- select NFS_ACL_SUPPORT if NFS_V3_ACL
- help
- Choose Y here if you want to access files residing on other
- computers using Sun's Network File System protocol. To compile
- this file system support as a module, choose M here: the module
- will be called nfs.
-
- To mount file systems exported by NFS servers, you also need to
- install the user space mount.nfs command which can be found in
- the Linux nfs-utils package, available from http://linux-nfs.org/.
- Information about using the mount command is available in the
- mount(8) man page. More detail about the Linux NFS client
- implementation is available via the nfs(5) man page.
-
- Below you can choose which versions of the NFS protocol are
- available in the kernel to mount NFS servers. Support for NFS
- version 2 (RFC 1094) is always available when NFS_FS is selected.
-
- To configure a system which mounts its root file system via NFS
- at boot time, say Y here, select "Kernel level IP
- autoconfiguration" in the NETWORK menu, and select "Root file
- system on NFS" below. You cannot compile this file system as a
- module in this case.
-
- If unsure, say N.
-
-config NFS_V3
- bool "NFS client support for NFS version 3"
- depends on NFS_FS
- help
- This option enables support for version 3 of the NFS protocol
- (RFC 1813) in the kernel's NFS client.
-
- If unsure, say Y.
-
-config NFS_V3_ACL
- bool "NFS client support for the NFSv3 ACL protocol extension"
- depends on NFS_V3
- help
- Some NFS servers support an auxiliary NFSv3 ACL protocol that
- Sun added to Solaris but never became an official part of the
- NFS version 3 protocol. This protocol extension allows
- applications on NFS clients to manipulate POSIX Access Control
- Lists on files residing on NFS servers. NFS servers enforce
- ACLs on local files whether this protocol is available or not.
-
- Choose Y here if your NFS server supports the Solaris NFSv3 ACL
- protocol extension and you want your NFS client to allow
- applications to access and modify ACLs on files on the server.
-
- Most NFS servers don't support the Solaris NFSv3 ACL protocol
- extension. You can choose N here or specify the "noacl" mount
- option to prevent your NFS client from trying to use the NFSv3
- ACL protocol.
-
- If unsure, say N.
-
-config NFS_V4
- bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
- depends on NFS_FS && EXPERIMENTAL
- select RPCSEC_GSS_KRB5
- help
- This option enables support for version 4 of the NFS protocol
- (RFC 3530) in the kernel's NFS client.
-
- To mount NFS servers using NFSv4, you also need to install user
- space programs which can be found in the Linux nfs-utils package,
- available from http://linux-nfs.org/.
-
- If unsure, say N.
-
-config ROOT_NFS
- bool "Root file system on NFS"
- depends on NFS_FS=y && IP_PNP
- help
- If you want your system to mount its root file system via NFS,
- choose Y here. This is common practice for managing systems
- without local permanent storage. For details, read
- <file:Documentation/filesystems/nfsroot.txt>.
-
- Most people say N here.
-
-config NFSD
- tristate "NFS server support"
- depends on INET
- select LOCKD
- select SUNRPC
- select EXPORTFS
- select NFS_ACL_SUPPORT if NFSD_V2_ACL
- help
- Choose Y here if you want to allow other computers to access
- files residing on this system using Sun's Network File System
- protocol. To compile the NFS server support as a module,
- choose M here: the module will be called nfsd.
-
- You may choose to use a user-space NFS server instead, in which
- case you can choose N here.
-
- To export local file systems using NFS, you also need to install
- user space programs which can be found in the Linux nfs-utils
- package, available from http://linux-nfs.org/. More detail about
- the Linux NFS server implementation is available via the
- exports(5) man page.
-
- Below you can choose which versions of the NFS protocol are
- available to clients mounting the NFS server on this system.
- Support for NFS version 2 (RFC 1094) is always available when
- CONFIG_NFSD is selected.
-
- If unsure, say N.
-
-config NFSD_V2_ACL
- bool
- depends on NFSD
-
-config NFSD_V3
- bool "NFS server support for NFS version 3"
- depends on NFSD
- help
- This option enables support in your system's NFS server for
- version 3 of the NFS protocol (RFC 1813).
-
- If unsure, say Y.
-
-config NFSD_V3_ACL
- bool "NFS server support for the NFSv3 ACL protocol extension"
- depends on NFSD_V3
- select NFSD_V2_ACL
- help
- Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
- never became an official part of the NFS version 3 protocol.
- This protocol extension allows applications on NFS clients to
- manipulate POSIX Access Control Lists on files residing on NFS
- servers. NFS servers enforce POSIX ACLs on local files whether
- this protocol is available or not.
-
- This option enables support in your system's NFS server for the
- NFSv3 ACL protocol extension allowing NFS clients to manipulate
- POSIX ACLs on files exported by your system's NFS server. NFS
- clients which support the Solaris NFSv3 ACL protocol can then
- access and modify ACLs on your NFS server.
-
- To store ACLs on your NFS server, you also need to enable ACL-
- related CONFIG options for your local file systems of choice.
-
- If unsure, say N.
-
-config NFSD_V4
- bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
- depends on NFSD && PROC_FS && EXPERIMENTAL
- select NFSD_V3
- select FS_POSIX_ACL
- select RPCSEC_GSS_KRB5
- help
- This option enables support in your system's NFS server for
- version 4 of the NFS protocol (RFC 3530).
-
- To export files using NFSv4, you need to install additional user
- space programs which can be found in the Linux nfs-utils package,
- available from http://linux-nfs.org/.
-
- If unsure, say N.
+source "fs/nfs/Kconfig"
+source "fs/nfsd/Kconfig"
config LOCKD
tristate
depends on NFSD || NFS_FS
default y
-config SUNRPC
- tristate
-
-config SUNRPC_GSS
- tristate
-
-config SUNRPC_XPRT_RDMA
- tristate
- depends on SUNRPC && INFINIBAND && EXPERIMENTAL
- default SUNRPC && INFINIBAND
- help
- This option enables an RPC client transport capability that
- allows the NFS client to mount servers via an RDMA-enabled
- transport.
-
- To compile RPC client RDMA transport support as a module,
- choose M here: the module will be called xprtrdma.
-
- If unsure, say N.
-
-config SUNRPC_REGISTER_V4
- bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- default n
- help
- Sun added support for registering RPC services at an IPv6
- address by creating two new versions of the rpcbind protocol
- (RFC 1833).
-
- This option enables support in the kernel RPC server for
- registering kernel RPC services via version 4 of the rpcbind
- protocol. If you enable this option, you must run a portmapper
- daemon that supports rpcbind protocol version 4.
-
- Serving NFS over IPv6 from knfsd (the kernel's NFS server)
- requires that you enable this option and use a portmapper that
- supports rpcbind version 4.
-
- If unsure, say N to get traditional behavior (register kernel
- RPC services using only rpcbind version 2). Distributions
- using the legacy Linux portmapper daemon must say N here.
-
-config RPCSEC_GSS_KRB5
- tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- select SUNRPC_GSS
- select CRYPTO
- select CRYPTO_MD5
- select CRYPTO_DES
- select CRYPTO_CBC
- help
- Choose Y here to enable Secure RPC using the Kerberos version 5
- GSS-API mechanism (RFC 1964).
-
- Secure RPC calls with Kerberos require an auxiliary user-space
- daemon which may be found in the Linux nfs-utils package
- available from http://linux-nfs.org/. In addition, user-space
- Kerberos support should be installed.
-
- If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
- tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- select SUNRPC_GSS
- select CRYPTO
- select CRYPTO_MD5
- select CRYPTO_DES
- select CRYPTO_CAST5
- select CRYPTO_CBC
- help
- Choose Y here to enable Secure RPC using the SPKM3 public key
- GSS-API mechansim (RFC 2025).
-
- Secure RPC calls with SPKM3 require an auxiliary userspace
- daemon which may be found in the Linux nfs-utils package
- available from http://linux-nfs.org/.
-
- If unsure, say N.
-
-config SMB_FS
- tristate "SMB file system support (OBSOLETE, please use CIFS)"
- depends on INET
- select NLS
- help
- SMB (Server Message Block) is the protocol Windows for Workgroups
- (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
- files and printers over local networks. Saying Y here allows you to
- mount their file systems (often called "shares" in this context) and
- access them just like any other Unix directory. Currently, this
- works only if the Windows machines use TCP/IP as the underlying
- transport protocol, and not NetBEUI. For details, read
- <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- Note: if you just want your box to act as an SMB *server* and make
- files and printing services available to Windows clients (which need
- to have a TCP/IP stack), you don't need to say Y here; you can use
- the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
- for that.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- To compile the SMB support as a module, choose M here:
- the module will be called smbfs. Most people say N, however.
-
-config SMB_NLS_DEFAULT
- bool "Use a default NLS"
- depends on SMB_FS
- help
- Enabling this will make smbfs use nls translations by default. You
- need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
- settings and you need to give the default nls for the SMB server as
- CONFIG_SMB_NLS_REMOTE.
-
- The nls settings can be changed at mount time, if your smbmount
- supports that, using the codepage and iocharset parameters.
-
- smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
- string "Default Remote NLS Option"
- depends on SMB_NLS_DEFAULT
- default "cp437"
- help
- This setting allows you to specify a default value for which
- codepage the server uses. If this field is left blank no
- translations will be done by default. The local codepage/charset
- default to CONFIG_NLS_DEFAULT.
-
- The nls settings can be changed at mount time, if your smbmount
- supports that, using the codepage and iocharset parameters.
-
- smbmount from samba 2.2.0 or later supports this.
-
+source "net/sunrpc/Kconfig"
+source "fs/smbfs/Kconfig"
source "fs/cifs/Kconfig"
-
-config NCP_FS
- tristate "NCP file system support (to mount NetWare volumes)"
- depends on IPX!=n || INET
- help
- NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
- used by Novell NetWare clients to talk to file servers. It is to
- IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
- to mount NetWare file server volumes and to access them just like
- any other Unix directory. For details, please read the file
- <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
- the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
- You do not have to say Y here if you want your Linux box to act as a
- file *server* for Novell NetWare clients.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- To compile this as a module, choose M here: the module will be called
- ncpfs. Say N unless you are connected to a Novell network.
-
source "fs/ncpfs/Kconfig"
-
-config CODA_FS
- tristate "Coda file system support (advanced network fs)"
- depends on INET
- help
- Coda is an advanced network file system, similar to NFS in that it
- enables you to mount file systems of a remote server and access them
- with regular Unix commands as if they were sitting on your hard
- disk. Coda has several advantages over NFS: support for
- disconnected operation (e.g. for laptops), read/write server
- replication, security model for authentication and encryption,
- persistent client caches and write back caching.
-
- If you say Y here, your Linux box will be able to act as a Coda
- *client*. You will need user level code as well, both for the
- client and server. Servers are currently user level, i.e. they need
- no kernel support. Please read
- <file:Documentation/filesystems/coda.txt> and check out the Coda
- home page <http://www.coda.cs.cmu.edu/>.
-
- To compile the coda client support as a module, choose M here: the
- module will be called coda.
-
-config AFS_FS
- tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
- depends on INET && EXPERIMENTAL
- select AF_RXRPC
- help
- If you say Y here, you will get an experimental Andrew File System
- driver. It currently only supports unsecured read-only AFS access.
-
- See <file:Documentation/filesystems/afs.txt> for more information.
-
- If unsure, say N.
-
-config AFS_DEBUG
- bool "AFS dynamic debugging"
- depends on AFS_FS
- help
- Say Y here to make runtime controllable debugging messages appear.
-
- See <file:Documentation/filesystems/afs.txt> for more information.
-
- If unsure, say N.
-
-config 9P_FS
- tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
- depends on INET && NET_9P && EXPERIMENTAL
- help
- If you say Y here, you will get experimental support for
- Plan 9 resource sharing via the 9P2000 protocol.
-
- See <http://v9fs.sf.net> for more information.
-
- If unsure, say N.
+source "fs/coda/Kconfig"
+source "fs/afs/Kconfig"
+source "fs/9p/Kconfig"
endif # NETWORK_FILESYSTEMS
--- /dev/null
+config ADFS_FS
+ tristate "ADFS file system support (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ help
+ The Acorn Disc Filing System is the standard file system of the
+ RiscOS operating system which runs on Acorn's ARM-based Risc PC
+ systems and the Acorn Archimedes range of machines. If you say Y
+ here, Linux will be able to read from ADFS partitions on hard drives
+ and from ADFS-formatted floppy discs. If you also want to be able to
+ write to those devices, say Y to "ADFS write support" below.
+
+ The ADFS partition should be the first partition (i.e.,
+ /dev/[hs]d?1) on each of your drives. Please read the file
+ <file:Documentation/filesystems/adfs.txt> for further details.
+
+ To compile this code as a module, choose M here: the module will be
+ called adfs.
+
+ If unsure, say N.
+
+config ADFS_FS_RW
+ bool "ADFS write support (DANGEROUS)"
+ depends on ADFS_FS
+ help
+ If you say Y here, you will be able to write to ADFS partitions on
+ hard drives and ADFS-formatted floppy disks. This is experimental
+ codes, so if you're unsure, say N.
--- /dev/null
+config AFFS_FS
+ tristate "Amiga FFS file system support (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ help
+ The Fast File System (FFS) is the common file system used on hard
+ disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
+ if you want to be able to read and write files from and to an Amiga
+ FFS partition on your hard drive. Amiga floppies however cannot be
+ read with this driver due to an incompatibility of the floppy
+ controller used in an Amiga and the standard floppy controller in
+ PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+ and <file:fs/affs/Changes>.
+
+ With this driver you can also mount disk files used by Bernd
+ Schmidt's Un*X Amiga Emulator
+ (<http://www.freiburg.linux.de/~uae/>).
+ If you want to do this, you will also need to say Y or M to "Loop
+ device support", above.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called affs. If unsure, say N.
--- /dev/null
+config AFS_FS
+ tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
+ depends on INET && EXPERIMENTAL
+ select AF_RXRPC
+ help
+ If you say Y here, you will get an experimental Andrew File System
+ driver. It currently only supports unsecured read-only AFS access.
+
+ See <file:Documentation/filesystems/afs.txt> for more information.
+
+ If unsure, say N.
+
+config AFS_DEBUG
+ bool "AFS dynamic debugging"
+ depends on AFS_FS
+ help
+ Say Y here to make runtime controllable debugging messages appear.
+
+ See <file:Documentation/filesystems/afs.txt> for more information.
+
+ If unsure, say N.
--- /dev/null
+config AUTOFS_FS
+ tristate "Kernel automounter support"
+ help
+ The automounter is a tool to automatically mount remote file systems
+ on demand. This implementation is partially kernel-based to reduce
+ overhead in the already-mounted case; this is unlike the BSD
+ automounter (amd), which is a pure user space daemon.
+
+ To use the automounter you need the user-space tools from the autofs
+ package; you can find the location in <file:Documentation/Changes>.
+ You also want to answer Y to "NFS file system support", below.
+
+ If you want to use the newer version of the automounter with more
+ features, say N here and say Y to "Kernel automounter v4 support",
+ below.
+
+ To compile this support as a module, choose M here: the module will be
+ called autofs.
+
+ If you are not a part of a fairly large, distributed network, you
+ probably do not need an automounter, and can say N here.
--- /dev/null
+config AUTOFS4_FS
+ tristate "Kernel automounter version 4 support (also supports v3)"
+ help
+ The automounter is a tool to automatically mount remote file systems
+ on demand. This implementation is partially kernel-based to reduce
+ overhead in the already-mounted case; this is unlike the BSD
+ automounter (amd), which is a pure user space daemon.
+
+ To use the automounter you need the user-space tools from
+ <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
+ want to answer Y to "NFS file system support", below.
+
+ To compile this support as a module, choose M here: the module will be
+ called autofs4. You will need to add "alias autofs autofs4" to your
+ modules configuration file.
+
+ If you are not a part of a fairly large, distributed network or
+ don't have a laptop which needs to dynamically reconfigure to the
+ local network, you probably do not need an automounter, and can say
+ N here.
--- /dev/null
+config BEFS_FS
+ tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ select NLS
+ help
+ The BeOS File System (BeFS) is the native file system of Be, Inc's
+ BeOS. Notable features include support for arbitrary attributes
+ on files and directories, and database-like indices on selected
+ attributes. (Also note that this driver doesn't make those features
+ available at this time). It is a 64 bit filesystem, so it supports
+ extremely large volumes and files.
+
+ If you use this filesystem, you should also say Y to at least one
+ of the NLS (native language support) options below.
+
+ If you don't know what this is about, say N.
+
+ To compile this as a module, choose M here: the module will be
+ called befs.
+
+config BEFS_DEBUG
+ bool "Debug BeFS"
+ depends on BEFS_FS
+ help
+ If you say Y here, you can use the 'debug' mount option to enable
+ debugging output from the driver.
--- /dev/null
+config BFS_FS
+ tristate "BFS file system support (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ help
+ Boot File System (BFS) is a file system used under SCO UnixWare to
+ allow the bootloader access to the kernel image and other important
+ files during the boot process. It is usually mounted under /stand
+ and corresponds to the slice marked as "STAND" in the UnixWare
+ partition. You should say Y if you want to read or write the files
+ on your /stand slice from within Linux. You then also need to say Y
+ to "UnixWare slices support", below. More information about the BFS
+ file system is contained in the file
+ <file:Documentation/filesystems/bfs.txt>.
+
+ If you don't know what this is about, say N.
+
+ To compile this as a module, choose M here: the module will be called
+ bfs. Note that the file system of your root partition (the one
+ containing the directory /) cannot be compiled as a module.
--- /dev/null
+config BTRFS_FS
+ tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
+ depends on EXPERIMENTAL
+ select LIBCRC32C
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ help
+ Btrfs is a new filesystem with extents, writable snapshotting,
+ support for multiple devices and many more features.
+
+ Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
+ FINALIZED. You should say N here unless you are interested in
+ testing Btrfs with non-critical data.
+
+ To compile this file system support as a module, choose M here. The
+ module will be called btrfs.
+
+ If unsure, say N.
--- /dev/null
+config CODA_FS
+ tristate "Coda file system support (advanced network fs)"
+ depends on INET
+ help
+ Coda is an advanced network file system, similar to NFS in that it
+ enables you to mount file systems of a remote server and access them
+ with regular Unix commands as if they were sitting on your hard
+ disk. Coda has several advantages over NFS: support for
+ disconnected operation (e.g. for laptops), read/write server
+ replication, security model for authentication and encryption,
+ persistent client caches and write back caching.
+
+ If you say Y here, your Linux box will be able to act as a Coda
+ *client*. You will need user level code as well, both for the
+ client and server. Servers are currently user level, i.e. they need
+ no kernel support. Please read
+ <file:Documentation/filesystems/coda.txt> and check out the Coda
+ home page <http://www.coda.cs.cmu.edu/>.
+
+ To compile the coda client support as a module, choose M here: the
+ module will be called coda.
--- /dev/null
+config CONFIGFS_FS
+ tristate "Userspace-driven configuration filesystem"
+ depends on SYSFS
+ help
+ configfs is a ram-based filesystem that provides the converse
+ of sysfs's functionality. Where sysfs is a filesystem-based
+ view of kernel objects, configfs is a filesystem-based manager
+ of kernel objects, or config_items.
+
+ Both sysfs and configfs can and should exist together on the
+ same system. One is not a replacement for the other.
--- /dev/null
+config CRAMFS
+ tristate "Compressed ROM file system support (cramfs)"
+ depends on BLOCK
+ select ZLIB_INFLATE
+ help
+ Saying Y here includes support for CramFs (Compressed ROM File
+ System). CramFs is designed to be a simple, small, and compressed
+ file system for ROM based embedded systems. CramFs is read-only,
+ limited to 256MB file systems (with 16MB files), and doesn't support
+ 16/32 bits uid/gid, hard links and timestamps.
+
+ See <file:Documentation/filesystems/cramfs.txt> and
+ <file:fs/cramfs/README> for further information.
+
+ To compile this as a module, choose M here: the module will be called
+ cramfs. Note that the root file system (the one containing the
+ directory /) cannot be compiled as a module.
+
+ If unsure, say N.
notify = xop->callback;
if (op->info.rv) {
- notify(flc, NULL, op->info.rv);
+ notify(fl, NULL, op->info.rv);
goto out;
}
(unsigned long long)op->info.number, file, fl);
}
- rv = notify(flc, NULL, 0);
+ rv = notify(fl, NULL, 0);
if (rv) {
/* XXX: We need to cancel the fs lock here: */
log_print("dlm_plock_callback: lock granted after lock request "
if (rv == -ENOENT)
rv = 0;
else if (rv > 0) {
+ locks_init_lock(fl);
fl->fl_type = (op->info.ex) ? F_WRLCK : F_RDLCK;
+ fl->fl_flags = FL_POSIX;
fl->fl_pid = op->info.pid;
fl->fl_start = op->info.start;
fl->fl_end = op->info.end;
#define __DQUOT_PARANOIA
/*
- * There are two quota SMP locks. dq_list_lock protects all lists with quotas
- * and quota formats and also dqstats structure containing statistics about the
- * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures
- * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
+ * There are three quota SMP locks. dq_list_lock protects all lists with quotas
+ * and quota formats, dqstats structure containing statistics about the lists
+ * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and
+ * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
* i_blocks and i_bytes updates itself are guarded by i_lock acquired directly
- * in inode_add_bytes() and inode_sub_bytes().
+ * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects
+ * modifications of quota state (on quotaon and quotaoff) and readers who care
+ * about latest values take it as well.
*
- * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock
+ * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock,
+ * dq_list_lock > dq_state_lock
*
* Note that some things (eg. sb pointer, type, id) doesn't change during
* the life of the dquot structure and so needn't to be protected by a lock
* operation is just reading pointers from inode (or not using them at all) the
* read lock is enough. If pointers are altered function must hold write lock
* (these locking rules also apply for S_NOQUOTA flag in the inode - note that
- * for altering the flag i_mutex is also needed). If operation is holding
- * reference to dquot in other way (e.g. quotactl ops) it must be guarded by
- * dqonoff_mutex.
- * This locking assures that:
- * a) update/access to dquot pointers in inode is serialized
- * b) everyone is guarded against invalidate_dquots()
+ * for altering the flag i_mutex is also needed).
*
* Each dquot has its dq_lock mutex. Locked dquots might not be referenced
* from inodes (dquot_alloc_space() and such don't check the dq_lock).
* Lock ordering (including related VFS locks) is the following:
* i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock >
* dqio_mutex
+ * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem >
+ * dqptr_sem. But filesystem has to count with the fact that functions such as
+ * dquot_alloc_space() acquire dqptr_sem and they usually have to be called
+ * from inside a transaction to keep filesystem consistency after a crash. Also
+ * filesystems usually want to do some IO on dquot from ->mark_dirty which is
+ * called with dqptr_sem held.
* i_mutex on quota files is special (it's below dqio_mutex)
*/
static DEFINE_SPINLOCK(dq_list_lock);
+static DEFINE_SPINLOCK(dq_state_lock);
DEFINE_SPINLOCK(dq_data_lock);
static char *quotatypes[] = INITQFNAMES;
* quota is disabled and pointers from inodes removed so there cannot be new
* quota users. There can still be some users of quotas due to inodes being
* just deleted or pruned by prune_icache() (those are not attached to any
- * list). We have to wait for such users.
+ * list) or parallel quotactl call. We have to wait for such users.
*/
static void invalidate_dquots(struct super_block *sb, int type)
{
/*
* Put reference to dquot
* NOTE: If you change this function please check whether dqput_blocks() works right...
- * MUST be called with either dqptr_sem or dqonoff_mutex held
*/
void dqput(struct dquot *dquot)
{
return dquot;
}
-/*
- * Check whether dquot is in memory.
- * MUST be called with either dqptr_sem or dqonoff_mutex held
- */
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type)
-{
- unsigned int hashent = hashfn(sb, id, type);
- int ret = 0;
-
- if (!sb_has_quota_active(sb, type))
- return 0;
- spin_lock(&dq_list_lock);
- if (find_dquot(hashent, sb, id, type) != NODQUOT)
- ret = 1;
- spin_unlock(&dq_list_lock);
- return ret;
-}
-
/*
* Get reference to dquot
- * MUST be called with either dqptr_sem or dqonoff_mutex held
+ *
+ * Locking is slightly tricky here. We are guarded from parallel quotaoff()
+ * destroying our dquot by:
+ * a) checking for quota flags under dq_list_lock and
+ * b) getting a reference to dquot before we release dq_list_lock
*/
struct dquot *dqget(struct super_block *sb, unsigned int id, int type)
{
unsigned int hashent = hashfn(sb, id, type);
- struct dquot *dquot, *empty = NODQUOT;
+ struct dquot *dquot = NODQUOT, *empty = NODQUOT;
if (!sb_has_quota_active(sb, type))
return NODQUOT;
we_slept:
spin_lock(&dq_list_lock);
+ spin_lock(&dq_state_lock);
+ if (!sb_has_quota_active(sb, type)) {
+ spin_unlock(&dq_state_lock);
+ spin_unlock(&dq_list_lock);
+ goto out;
+ }
+ spin_unlock(&dq_state_lock);
+
if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) {
if (empty == NODQUOT) {
spin_unlock(&dq_list_lock);
goto we_slept;
}
dquot = empty;
+ empty = NODQUOT;
dquot->dq_id = id;
/* all dquots go on the inuse_list */
put_inuse(dquot);
dqstats.cache_hits++;
dqstats.lookups++;
spin_unlock(&dq_list_lock);
- if (empty)
- do_destroy_dquot(empty);
}
/* Wait for dq_lock - after this we know that either dquot_release() is already
* finished or it will be canceled due to dq_count > 1 test */
/* Read the dquot and instantiate it (everything done only if needed) */
if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) {
dqput(dquot);
- return NODQUOT;
+ dquot = NODQUOT;
+ goto out;
}
#ifdef __DQUOT_PARANOIA
BUG_ON(!dquot->dq_sb); /* Has somebody invalidated entry under us? */
#endif
+out:
+ if (empty)
+ do_destroy_dquot(empty);
return dquot;
}
}
/*
* Initialize quota pointers in inode
- * Transaction must be started at entry
+ * We do things in a bit complicated way but by that we avoid calling
+ * dqget() and thus filesystem callbacks under dqptr_sem.
*/
int dquot_initialize(struct inode *inode, int type)
{
unsigned int id = 0;
int cnt, ret = 0;
+ struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT };
+ struct super_block *sb = inode->i_sb;
/* First test before acquiring mutex - solves deadlocks when we
* re-enter the quota code and are already holding the mutex */
if (IS_NOQUOTA(inode))
return 0;
- down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+ /* First get references to structures we might need. */
+ for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+ if (type != -1 && cnt != type)
+ continue;
+ switch (cnt) {
+ case USRQUOTA:
+ id = inode->i_uid;
+ break;
+ case GRPQUOTA:
+ id = inode->i_gid;
+ break;
+ }
+ got[cnt] = dqget(sb, id, cnt);
+ }
+
+ down_write(&sb_dqopt(sb)->dqptr_sem);
/* Having dqptr_sem we know NOQUOTA flags can't be altered... */
if (IS_NOQUOTA(inode))
goto out_err;
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
+ /* Avoid races with quotaoff() */
+ if (!sb_has_quota_active(sb, cnt))
+ continue;
if (inode->i_dquot[cnt] == NODQUOT) {
- switch (cnt) {
- case USRQUOTA:
- id = inode->i_uid;
- break;
- case GRPQUOTA:
- id = inode->i_gid;
- break;
- }
- inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt);
+ inode->i_dquot[cnt] = got[cnt];
+ got[cnt] = NODQUOT;
}
}
out_err:
- up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+ up_write(&sb_dqopt(sb)->dqptr_sem);
+ /* Drop unused references */
+ for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+ dqput(got[cnt]);
return ret;
}
/*
* Release all quotas referenced by inode
- * Transaction must be started at an entry
*/
-int dquot_drop_locked(struct inode *inode)
+int dquot_drop(struct inode *inode)
{
int cnt;
+ struct dquot *put[MAXQUOTAS];
+ down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- if (inode->i_dquot[cnt] != NODQUOT) {
- dqput(inode->i_dquot[cnt]);
- inode->i_dquot[cnt] = NODQUOT;
- }
+ put[cnt] = inode->i_dquot[cnt];
+ inode->i_dquot[cnt] = NODQUOT;
}
- return 0;
-}
-
-int dquot_drop(struct inode *inode)
-{
- down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
- dquot_drop_locked(inode);
up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+ for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+ dqput(put[cnt]);
return 0;
}
qsize_t space;
struct dquot *transfer_from[MAXQUOTAS];
struct dquot *transfer_to[MAXQUOTAS];
- int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid,
- chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid;
+ int cnt, ret = QUOTA_OK;
+ int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid,
+ chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid;
char warntype_to[MAXQUOTAS];
char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
* re-enter the quota code and are already holding the mutex */
if (IS_NOQUOTA(inode))
return QUOTA_OK;
- /* Clear the arrays */
+ /* Initialize the arrays */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- transfer_to[cnt] = transfer_from[cnt] = NODQUOT;
+ transfer_from[cnt] = NODQUOT;
+ transfer_to[cnt] = NODQUOT;
warntype_to[cnt] = QUOTA_NL_NOWARN;
- }
- down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
- /* Now recheck reliably when holding dqptr_sem */
- if (IS_NOQUOTA(inode)) { /* File without quota accounting? */
- up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
- return QUOTA_OK;
- }
- /* First build the transfer_to list - here we can block on
- * reading/instantiating of dquots. We know that the transaction for
- * us was already started so we don't violate lock ranking here */
- for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
switch (cnt) {
case USRQUOTA:
if (!chuid)
break;
}
}
+
+ down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+ /* Now recheck reliably when holding dqptr_sem */
+ if (IS_NOQUOTA(inode)) { /* File without quota accounting? */
+ up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+ goto put_all;
+ }
spin_lock(&dq_data_lock);
space = inode_get_bytes(inode);
/* Build the transfer_from list and check the limits */
if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) ==
NO_QUOTA || check_bdq(transfer_to[cnt], space, 0,
warntype_to + cnt) == NO_QUOTA)
- goto warn_put_all;
+ goto over_quota;
}
/*
inode->i_dquot[cnt] = transfer_to[cnt];
}
- ret = QUOTA_OK;
-warn_put_all:
spin_unlock(&dq_data_lock);
+ up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
/* Dirtify all the dquots - this can block when journalling */
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (transfer_from[cnt])
mark_dquot_dirty(transfer_from[cnt]);
- if (transfer_to[cnt])
+ if (transfer_to[cnt]) {
mark_dquot_dirty(transfer_to[cnt]);
+ /* The reference we got is transferred to the inode */
+ transfer_to[cnt] = NODQUOT;
+ }
}
+warn_put_all:
flush_warnings(transfer_to, warntype_to);
flush_warnings(transfer_from, warntype_from_inodes);
flush_warnings(transfer_from, warntype_from_space);
-
+put_all:
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT)
- dqput(transfer_from[cnt]);
- if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT)
- dqput(transfer_to[cnt]);
+ dqput(transfer_from[cnt]);
+ dqput(transfer_to[cnt]);
}
- up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
return ret;
+over_quota:
+ spin_unlock(&dq_data_lock);
+ up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+ /* Clear dquot pointers we don't want to dqput() */
+ for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+ transfer_from[cnt] = NODQUOT;
+ ret = NO_QUOTA;
+ goto warn_put_all;
}
/* Wrapper for transferring ownership of an inode */
continue;
if (flags & DQUOT_SUSPENDED) {
+ spin_lock(&dq_state_lock);
dqopt->flags |=
dquot_state_flag(DQUOT_SUSPENDED, cnt);
+ spin_unlock(&dq_state_lock);
} else {
+ spin_lock(&dq_state_lock);
dqopt->flags &= ~dquot_state_flag(flags, cnt);
/* Turning off suspended quotas? */
if (!sb_has_quota_loaded(sb, cnt) &&
sb_has_quota_suspended(sb, cnt)) {
dqopt->flags &= ~dquot_state_flag(
DQUOT_SUSPENDED, cnt);
+ spin_unlock(&dq_state_lock);
iput(dqopt->files[cnt]);
dqopt->files[cnt] = NULL;
continue;
}
+ spin_unlock(&dq_state_lock);
}
/* We still have to keep quota loaded? */
}
mutex_unlock(&dqopt->dqio_mutex);
mutex_unlock(&inode->i_mutex);
+ spin_lock(&dq_state_lock);
dqopt->flags |= dquot_state_flag(flags, type);
+ spin_unlock(&dq_state_lock);
add_dquot_ref(sb, type);
mutex_unlock(&dqopt->dqonoff_mutex);
}
inode = dqopt->files[type];
dqopt->files[type] = NULL;
+ spin_lock(&dq_state_lock);
flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
DQUOT_LIMITS_ENABLED, type);
dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type);
+ spin_unlock(&dq_state_lock);
mutex_unlock(&dqopt->dqonoff_mutex);
flags = dquot_generic_flag(flags, type);
ret = -EBUSY;
goto out_lock;
}
+ spin_lock(&dq_state_lock);
sb_dqopt(sb)->flags |= dquot_state_flag(flags, type);
+ spin_unlock(&dq_state_lock);
out_lock:
mutex_unlock(&dqopt->dqonoff_mutex);
return ret;
{
struct dquot *dquot;
- mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
- if (!(dquot = dqget(sb, id, type))) {
- mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+ dquot = dqget(sb, id, type);
+ if (dquot == NODQUOT)
return -ESRCH;
- }
do_get_dqblk(dquot, di);
dqput(dquot);
- mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+
return 0;
}
struct dquot *dquot;
int rc;
- mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
dquot = dqget(sb, id, type);
if (!dquot) {
rc = -ESRCH;
rc = do_set_dqblk(dquot, di);
dqput(dquot);
out:
- mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
return rc;
}
EXPORT_SYMBOL(dquot_mark_dquot_dirty);
EXPORT_SYMBOL(dquot_initialize);
EXPORT_SYMBOL(dquot_drop);
-EXPORT_SYMBOL(dquot_drop_locked);
EXPORT_SYMBOL(vfs_dq_drop);
EXPORT_SYMBOL(dqget);
EXPORT_SYMBOL(dqput);
-EXPORT_SYMBOL(dquot_is_cached);
EXPORT_SYMBOL(dquot_alloc_space);
EXPORT_SYMBOL(dquot_alloc_inode);
EXPORT_SYMBOL(dquot_free_space);
--- /dev/null
+config ECRYPT_FS
+ tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+ help
+ Encrypted filesystem that operates on the VFS layer. See
+ <file:Documentation/filesystems/ecryptfs.txt> to learn more about
+ eCryptfs. Userspace components are required and can be
+ obtained from <http://ecryptfs.sf.net>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ecryptfs.
--- /dev/null
+config EFS_FS
+ tristate "EFS file system support (read only) (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ help
+ EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+ disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+ uses the XFS file system for hard disk partitions however).
+
+ This implementation only offers read-only access. If you don't know
+ what all this is about, it's safe to say N. For more information
+ about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+ To compile the EFS file system support as a module, choose M here: the
+ module will be called efs.
/*
* Configuration options available inside /proc/sys/fs/epoll/
*/
-/* Maximum number of epoll devices, per user */
-static int max_user_instances __read_mostly;
/* Maximum number of epoll watched descriptors, per user */
static int max_user_watches __read_mostly;
static int zero;
ctl_table epoll_table[] = {
- {
- .procname = "max_user_instances",
- .data = &max_user_instances,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec_minmax,
- .extra1 = &zero,
- },
{
.procname = "max_user_watches",
.data = &max_user_watches,
mutex_unlock(&epmutex);
mutex_destroy(&ep->mtx);
- atomic_dec(&ep->user->epoll_devs);
free_uid(ep->user);
kfree(ep);
}
struct eventpoll *ep;
user = get_current_user();
- error = -EMFILE;
- if (unlikely(atomic_read(&user->epoll_devs) >=
- max_user_instances))
- goto free_uid;
error = -ENOMEM;
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
if (unlikely(!ep))
flags & O_CLOEXEC);
if (fd < 0)
ep_free(ep);
- atomic_inc(&ep->user->epoll_devs);
error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
struct sysinfo si;
si_meminfo(&si);
- max_user_instances = 128;
- max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+ /*
+ * Allows top 4% of lomem to be allocated for epoll watches (per user).
+ */
+ max_user_watches = (((si.totalram - si.totalhigh) / 25) << PAGE_SHIFT) /
EP_ITEM_COST;
/* Initialize the structure used to perform safe poll wait head wake ups */
--- /dev/null
+config FAT_FS
+ tristate
+ select NLS
+ help
+ If you want to use one of the FAT-based file systems (the MS-DOS and
+ VFAT (Windows 95) file systems), then you must say Y or M here
+ to include FAT support. You will then be able to mount partitions or
+ diskettes with FAT-based file systems and transparently access the
+ files on them, i.e. MSDOS files will look and behave just like all
+ other Unix files.
+
+ This FAT support is not a file system in itself, it only provides
+ the foundation for the other file systems. You will have to say Y or
+ M to at least one of "MSDOS fs support" or "VFAT fs support" in
+ order to make use of it.
+
+ Another way to read and write MSDOS floppies and hard drive
+ partitions from within Linux (but not transparently) is with the
+ mtools ("man mtools") program suite. You don't need to say Y here in
+ order to do that.
+
+ If you need to move large files on floppies between a DOS and a
+ Linux box, say Y here, mount the floppy under Linux with an MSDOS
+ file system and use GNU tar's M option. GNU tar is a program
+ available for Unix and DOS ("man tar" or "info tar").
+
+ The FAT support will enlarge your kernel by about 37 KB. If unsure,
+ say Y.
+
+ To compile this as a module, choose M here: the module will be called
+ fat. Note that if you compile the FAT support as a module, you
+ cannot compile any of the FAT-based file systems into the kernel
+ -- they will have to be modules as well.
+
+config MSDOS_FS
+ tristate "MSDOS fs support"
+ select FAT_FS
+ help
+ This allows you to mount MSDOS partitions of your hard drive (unless
+ they are compressed; to access compressed MSDOS partitions under
+ Linux, you can either use the DOS emulator DOSEMU, described in the
+ DOSEMU-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+ <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+ intend to use dosemu with a non-compressed MSDOS partition, say Y
+ here) and MSDOS floppies. This means that file access becomes
+ transparent, i.e. the MSDOS files look and behave just like all
+ other Unix files.
+
+ If you have Windows 95 or Windows NT installed on your MSDOS
+ partitions, you should use the VFAT file system (say Y to "VFAT fs
+ support" below), or you will not be able to see the long filenames
+ generated by Windows 95 / Windows NT.
+
+ This option will enlarge your kernel by about 7 KB. If unsure,
+ answer Y. This will only work if you said Y to "DOS FAT fs support"
+ as well. To compile this as a module, choose M here: the module will
+ be called msdos.
+
+config VFAT_FS
+ tristate "VFAT (Windows-95) fs support"
+ select FAT_FS
+ help
+ This option provides support for normal Windows file systems with
+ long filenames. That includes non-compressed FAT-based file systems
+ used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+ programs from the mtools package.
+
+ The VFAT support enlarges your kernel by about 10 KB and it only
+ works if you said Y to the "DOS FAT fs support" above. Please read
+ the file <file:Documentation/filesystems/vfat.txt> for details. If
+ unsure, say Y.
+
+ To compile this as a module, choose M here: the module will be called
+ vfat.
+
+config FAT_DEFAULT_CODEPAGE
+ int "Default codepage for FAT"
+ depends on MSDOS_FS || VFAT_FS
+ default 437
+ help
+ This option should be set to the codepage of your FAT filesystems.
+ It can be overridden with the "codepage" mount option.
+ See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+ string "Default iocharset for FAT"
+ depends on VFAT_FS
+ default "iso8859-1"
+ help
+ Set this to the default input/output character set you'd
+ like FAT to use. It should probably match the character set
+ that most of your FAT filesystems use, and can be overridden
+ with the "iocharset" mount option for FAT filesystems.
+ Note that "utf8" is not recommended for FAT filesystems.
+ If unsure, you shouldn't set "utf8" here.
+ See <file:Documentation/filesystems/vfat.txt> for more information.
--- /dev/null
+config VXFS_FS
+ tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+ depends on BLOCK
+ help
+ FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+ file system format. VERITAS VxFS(TM) is the standard file system
+ of SCO UnixWare (and possibly others) and optionally available
+ for Sunsoft Solaris, HP-UX and many other operating systems.
+ Currently only readonly access is supported.
+
+ NOTE: the file system type as used by mount(1), mount(2) and
+ fstab(5) is 'vxfs' as it describes the file system format, not
+ the actual driver.
+
+ To compile this as a module, choose M here: the module will be
+ called freevxfs. If unsure, say N.
--- /dev/null
+config FUSE_FS
+ tristate "FUSE (Filesystem in Userspace) support"
+ help
+ With FUSE it is possible to implement a fully functional filesystem
+ in a userspace program.
+
+ There's also companion library: libfuse. This library along with
+ utilities is available from the FUSE homepage:
+ <http://fuse.sourceforge.net/>
+
+ See <file:Documentation/filesystems/fuse.txt> for more information.
+ See <file:Documentation/Changes> for needed library/utility version.
+
+ If you want to develop a userspace FS, or if you want to use
+ a filesystem based on FUSE, answer Y or M.
fc->blocked = 0;
wake_up_all(&fc->blocked_waitq);
}
- if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+ if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+ fc->connected) {
clear_bdi_congested(&fc->bdi, READ);
clear_bdi_congested(&fc->bdi, WRITE);
}
struct fuse_copy_state *cs)
{
struct fuse_notify_poll_wakeup_out outarg;
- int err;
+ int err = -EINVAL;
if (size != sizeof(outarg))
- return -EINVAL;
+ goto err;
err = fuse_copy_one(cs, &outarg, sizeof(outarg));
if (err)
- return err;
+ goto err;
+ fuse_copy_finish(cs);
return fuse_notify_poll_wakeup(fc, &outarg);
+
+err:
+ fuse_copy_finish(cs);
+ return err;
}
static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
return fuse_notify_poll(fc, size, cs);
default:
+ fuse_copy_finish(cs);
return -EINVAL;
}
}
*/
if (!oh.unique) {
err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs);
- fuse_copy_finish(&cs);
return err ? err : nbytes;
}
ff->reserved_req = fuse_request_alloc();
if (!ff->reserved_req) {
kfree(ff);
- ff = NULL;
+ return NULL;
} else {
INIT_LIST_HEAD(&ff->write_entry);
atomic_set(&ff->count, 0);
list_del(&fc->entry);
fuse_ctl_remove_conn(fc);
mutex_unlock(&fuse_mutex);
+ bdi_destroy(&fc->bdi);
fuse_conn_put(fc);
}
if (fc->destroy_req)
fuse_request_free(fc->destroy_req);
mutex_destroy(&fc->inst_mutex);
- bdi_destroy(&fc->bdi);
fc->release(fc);
}
}
int err;
int is_bdev = sb->s_bdev != NULL;
+ err = -EINVAL;
if (sb->s_flags & MS_MANDLOCK)
- return -EINVAL;
+ goto err;
if (!parse_fuse_opt((char *) data, &d, is_bdev))
- return -EINVAL;
+ goto err;
if (is_bdev) {
#ifdef CONFIG_BLOCK
+ err = -EINVAL;
if (!sb_set_blocksize(sb, d.blksize))
- return -EINVAL;
+ goto err;
#endif
} else {
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_export_op = &fuse_export_operations;
file = fget(d.fd);
+ err = -EINVAL;
if (!file)
- return -EINVAL;
+ goto err;
if (file->f_op != &fuse_dev_operations)
- return -EINVAL;
+ goto err_fput;
fc = kmalloc(sizeof(*fc), GFP_KERNEL);
+ err = -ENOMEM;
if (!fc)
- return -ENOMEM;
+ goto err_fput;
err = fuse_conn_init(fc, sb);
if (err) {
kfree(fc);
- return err;
+ goto err_fput;
}
fc->release = fuse_free_conn;
err = -ENOMEM;
root = fuse_get_root_inode(sb, d.rootmode);
if (!root)
- goto err;
+ goto err_put_conn;
root_dentry = d_alloc_root(root);
if (!root_dentry) {
iput(root);
- goto err;
+ goto err_put_conn;
}
init_req = fuse_request_alloc();
fuse_request_free(init_req);
err_put_root:
dput(root_dentry);
- err:
- fput(file);
+ err_put_conn:
fuse_conn_put(fc);
+ err_fput:
+ fput(file);
+ err:
return err;
}
--- /dev/null
+config HFS_FS
+ tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ select NLS
+ help
+ If you say Y here, you will be able to mount Macintosh-formatted
+ floppy disks and hard drive partitions with full read-write access.
+ Please read <file:Documentation/filesystems/hfs.txt> to learn about
+ the available mount options.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called hfs.
--- /dev/null
+config HFSPLUS_FS
+ tristate "Apple Extended HFS file system support"
+ depends on BLOCK
+ select NLS
+ select NLS_UTF8
+ help
+ If you say Y here, you will be able to mount extended format
+ Macintosh-formatted hard drive partitions with full read-write access.
+
+ This file system is often called HFS+ and was introduced with
+ MacOS 8. It includes all Mac specific filesystem data such as
+ data forks and creator codes, but it also has several UNIX
+ style features such as file ownership and permissions.
--- /dev/null
+config HPFS_FS
+ tristate "OS/2 HPFS file system support"
+ depends on BLOCK
+ help
+ OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+ is the file system used for organizing files on OS/2 hard disk
+ partitions. Say Y if you want to be able to read files from and
+ write files to an OS/2 HPFS partition on your hard drive. OS/2
+ floppies however are in regular MSDOS format, so you don't need this
+ option in order to be able to read them. Read
+ <file:Documentation/filesystems/hpfs.txt>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called hpfs. If unsure, say N.
--- /dev/null
+config ISO9660_FS
+ tristate "ISO 9660 CDROM file system support"
+ help
+ This is the standard file system used on CD-ROMs. It was previously
+ known as "High Sierra File System" and is called "hsfs" on other
+ Unix systems. The so-called Rock-Ridge extensions which allow for
+ long Unix filenames and symbolic links are also supported by this
+ driver. If you have a CD-ROM drive and want to do more with it than
+ just listen to audio CDs and watch its LEDs, say Y (and read
+ <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>), thereby
+ enlarging your kernel by about 27 KB; otherwise say N.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called isofs.
+
+config JOLIET
+ bool "Microsoft Joliet CDROM extensions"
+ depends on ISO9660_FS
+ select NLS
+ help
+ Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+ which allows for long filenames in unicode format (unicode is the
+ new 16 bit character code, successor to ASCII, which encodes the
+ characters of almost all languages of the world; see
+ <http://www.unicode.org/> for more information). Say Y here if you
+ want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+ bool "Transparent decompression extension"
+ depends on ISO9660_FS
+ select ZLIB_INFLATE
+ help
+ This is a Linux-specific extension to RockRidge which lets you store
+ data in compressed form on a CD-ROM and have it transparently
+ decompressed when the CD-ROM is accessed. See
+ <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+ necessary to create such a filesystem. Say Y here if you want to be
+ able to read such compressed CD-ROMs.
--- /dev/null
+config JFS_FS
+ tristate "JFS filesystem support"
+ select NLS
+ help
+ This is a port of IBM's Journaled Filesystem . More information is
+ available in the file <file:Documentation/filesystems/jfs.txt>.
+
+ If you do not intend to use the JFS filesystem, say N.
+
+config JFS_POSIX_ACL
+ bool "JFS POSIX Access Control Lists"
+ depends on JFS_FS
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config JFS_SECURITY
+ bool "JFS Security Labels"
+ depends on JFS_FS
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the jfs filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config JFS_DEBUG
+ bool "JFS debugging"
+ depends on JFS_FS
+ help
+ If you are experiencing any problems with the JFS filesystem, say
+ Y here. This will result in additional debugging messages to be
+ written to the system log. Under normal circumstances, this
+ results in very little overhead.
+
+config JFS_STATISTICS
+ bool "JFS statistics"
+ depends on JFS_FS
+ help
+ Enabling this option will cause statistics from the JFS file system
+ to be made available to the user in the /proc/fs/jfs/ directory.
--- /dev/null
+config MINIX_FS
+ tristate "Minix file system support"
+ depends on BLOCK
+ help
+ Minix is a simple operating system used in many classes about OS's.
+ The minix file system (method to organize files on a hard disk
+ partition or a floppy disk) was the original file system for Linux,
+ but has been superseded by the second extended file system ext2fs.
+ You don't want to use the minix file system on your hard disk
+ because of certain built-in restrictions, but it is sometimes found
+ on older Linux floppy disks. This option will enlarge your kernel
+ by about 28 KB. If unsure, say N.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called minix. Note that the file system of your root
+ partition (the one containing the directory /) cannot be compiled as
+ a module.
#
# NCP Filesystem configuration
#
+config NCP_FS
+ tristate "NCP file system support (to mount NetWare volumes)"
+ depends on IPX!=n || INET
+ help
+ NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+ used by Novell NetWare clients to talk to file servers. It is to
+ IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
+ to mount NetWare file server volumes and to access them just like
+ any other Unix directory. For details, please read the file
+ <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+ the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
+
+ You do not have to say Y here if you want your Linux box to act as a
+ file *server* for Novell NetWare clients.
+
+ General information about how to connect Linux, Windows machines and
+ Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+ To compile this as a module, choose M here: the module will be called
+ ncpfs. Say N unless you are connected to a Novell network.
+
config NCPFS_PACKET_SIGNING
bool "Packet signatures"
depends on NCP_FS
--- /dev/null
+config NFS_FS
+ tristate "NFS client support"
+ depends on INET
+ select LOCKD
+ select SUNRPC
+ select NFS_ACL_SUPPORT if NFS_V3_ACL
+ help
+ Choose Y here if you want to access files residing on other
+ computers using Sun's Network File System protocol. To compile
+ this file system support as a module, choose M here: the module
+ will be called nfs.
+
+ To mount file systems exported by NFS servers, you also need to
+ install the user space mount.nfs command which can be found in
+ the Linux nfs-utils package, available from http://linux-nfs.org/.
+ Information about using the mount command is available in the
+ mount(8) man page. More detail about the Linux NFS client
+ implementation is available via the nfs(5) man page.
+
+ Below you can choose which versions of the NFS protocol are
+ available in the kernel to mount NFS servers. Support for NFS
+ version 2 (RFC 1094) is always available when NFS_FS is selected.
+
+ To configure a system which mounts its root file system via NFS
+ at boot time, say Y here, select "Kernel level IP
+ autoconfiguration" in the NETWORK menu, and select "Root file
+ system on NFS" below. You cannot compile this file system as a
+ module in this case.
+
+ If unsure, say N.
+
+config NFS_V3
+ bool "NFS client support for NFS version 3"
+ depends on NFS_FS
+ help
+ This option enables support for version 3 of the NFS protocol
+ (RFC 1813) in the kernel's NFS client.
+
+ If unsure, say Y.
+
+config NFS_V3_ACL
+ bool "NFS client support for the NFSv3 ACL protocol extension"
+ depends on NFS_V3
+ help
+ Some NFS servers support an auxiliary NFSv3 ACL protocol that
+ Sun added to Solaris but never became an official part of the
+ NFS version 3 protocol. This protocol extension allows
+ applications on NFS clients to manipulate POSIX Access Control
+ Lists on files residing on NFS servers. NFS servers enforce
+ ACLs on local files whether this protocol is available or not.
+
+ Choose Y here if your NFS server supports the Solaris NFSv3 ACL
+ protocol extension and you want your NFS client to allow
+ applications to access and modify ACLs on files on the server.
+
+ Most NFS servers don't support the Solaris NFSv3 ACL protocol
+ extension. You can choose N here or specify the "noacl" mount
+ option to prevent your NFS client from trying to use the NFSv3
+ ACL protocol.
+
+ If unsure, say N.
+
+config NFS_V4
+ bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
+ depends on NFS_FS && EXPERIMENTAL
+ select RPCSEC_GSS_KRB5
+ help
+ This option enables support for version 4 of the NFS protocol
+ (RFC 3530) in the kernel's NFS client.
+
+ To mount NFS servers using NFSv4, you also need to install user
+ space programs which can be found in the Linux nfs-utils package,
+ available from http://linux-nfs.org/.
+
+ If unsure, say N.
+
+config ROOT_NFS
+ bool "Root file system on NFS"
+ depends on NFS_FS=y && IP_PNP
+ help
+ If you want your system to mount its root file system via NFS,
+ choose Y here. This is common practice for managing systems
+ without local permanent storage. For details, read
+ <file:Documentation/filesystems/nfsroot.txt>.
+
+ Most people say N here.
--- /dev/null
+config NFSD
+ tristate "NFS server support"
+ depends on INET
+ select LOCKD
+ select SUNRPC
+ select EXPORTFS
+ select NFS_ACL_SUPPORT if NFSD_V2_ACL
+ help
+ Choose Y here if you want to allow other computers to access
+ files residing on this system using Sun's Network File System
+ protocol. To compile the NFS server support as a module,
+ choose M here: the module will be called nfsd.
+
+ You may choose to use a user-space NFS server instead, in which
+ case you can choose N here.
+
+ To export local file systems using NFS, you also need to install
+ user space programs which can be found in the Linux nfs-utils
+ package, available from http://linux-nfs.org/. More detail about
+ the Linux NFS server implementation is available via the
+ exports(5) man page.
+
+ Below you can choose which versions of the NFS protocol are
+ available to clients mounting the NFS server on this system.
+ Support for NFS version 2 (RFC 1094) is always available when
+ CONFIG_NFSD is selected.
+
+ If unsure, say N.
+
+config NFSD_V2_ACL
+ bool
+ depends on NFSD
+
+config NFSD_V3
+ bool "NFS server support for NFS version 3"
+ depends on NFSD
+ help
+ This option enables support in your system's NFS server for
+ version 3 of the NFS protocol (RFC 1813).
+
+ If unsure, say Y.
+
+config NFSD_V3_ACL
+ bool "NFS server support for the NFSv3 ACL protocol extension"
+ depends on NFSD_V3
+ select NFSD_V2_ACL
+ help
+ Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
+ never became an official part of the NFS version 3 protocol.
+ This protocol extension allows applications on NFS clients to
+ manipulate POSIX Access Control Lists on files residing on NFS
+ servers. NFS servers enforce POSIX ACLs on local files whether
+ this protocol is available or not.
+
+ This option enables support in your system's NFS server for the
+ NFSv3 ACL protocol extension allowing NFS clients to manipulate
+ POSIX ACLs on files exported by your system's NFS server. NFS
+ clients which support the Solaris NFSv3 ACL protocol can then
+ access and modify ACLs on your NFS server.
+
+ To store ACLs on your NFS server, you also need to enable ACL-
+ related CONFIG options for your local file systems of choice.
+
+ If unsure, say N.
+
+config NFSD_V4
+ bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
+ depends on NFSD && PROC_FS && EXPERIMENTAL
+ select NFSD_V3
+ select FS_POSIX_ACL
+ select RPCSEC_GSS_KRB5
+ help
+ This option enables support in your system's NFS server for
+ version 4 of the NFS protocol (RFC 3530).
+
+ To export files using NFSv4, you need to install additional user
+ space programs which can be found in the Linux nfs-utils package,
+ available from http://linux-nfs.org/.
+
+ If unsure, say N.
new->fsuid = exp->ex_anon_uid;
new->fsgid = exp->ex_anon_gid;
gi = groups_alloc(0);
+ if (!gi)
+ goto oom;
} else if (flags & NFSEXP_ROOTSQUASH) {
if (!new->fsuid)
new->fsuid = exp->ex_anon_uid;
new->cap_effective = cap_raise_nfsd_set(new->cap_effective,
new->cap_permitted);
put_cred(override_creds(new));
+ put_cred(new);
return 0;
oom:
file_lock.fl_owner = (fl_owner_t)lockt->lt_stateowner;
file_lock.fl_pid = current->tgid;
file_lock.fl_flags = FL_POSIX;
- file_lock.fl_lmops = &nfsd_posix_mng_ops;
file_lock.fl_start = lockt->lt_offset;
file_lock.fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length);
return ret;
}
+/*
+ * Get an inotify_kernel_event if one exists and is small
+ * enough to fit in "count". Return an error pointer if
+ * not large enough.
+ *
+ * Called with the device ev_mutex held.
+ */
+static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
+ size_t count)
+{
+ size_t event_size = sizeof(struct inotify_event);
+ struct inotify_kernel_event *kevent;
+
+ if (list_empty(&dev->events))
+ return NULL;
+
+ kevent = inotify_dev_get_event(dev);
+ if (kevent->name)
+ event_size += kevent->event.len;
+
+ if (event_size > count)
+ return ERR_PTR(-EINVAL);
+
+ remove_kevent(dev, kevent);
+ return kevent;
+}
+
+/*
+ * Copy an event to user space, returning how much we copied.
+ *
+ * We already checked that the event size is smaller than the
+ * buffer we had in "get_one_event()" above.
+ */
+static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent,
+ char __user *buf)
+{
+ size_t event_size = sizeof(struct inotify_event);
+
+ if (copy_to_user(buf, &kevent->event, event_size))
+ return -EFAULT;
+
+ if (kevent->name) {
+ buf += event_size;
+
+ if (copy_to_user(buf, kevent->name, kevent->event.len))
+ return -EFAULT;
+
+ event_size += kevent->event.len;
+ }
+ return event_size;
+}
+
static ssize_t inotify_read(struct file *file, char __user *buf,
size_t count, loff_t *pos)
{
- size_t event_size = sizeof (struct inotify_event);
struct inotify_device *dev;
char __user *start;
int ret;
dev = file->private_data;
while (1) {
+ struct inotify_kernel_event *kevent;
prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
mutex_lock(&dev->ev_mutex);
- if (!list_empty(&dev->events)) {
- ret = 0;
- break;
- }
+ kevent = get_one_event(dev, count);
mutex_unlock(&dev->ev_mutex);
- if (file->f_flags & O_NONBLOCK) {
- ret = -EAGAIN;
- break;
- }
-
- if (signal_pending(current)) {
- ret = -EINTR;
- break;
+ if (kevent) {
+ ret = PTR_ERR(kevent);
+ if (IS_ERR(kevent))
+ break;
+ ret = copy_event_to_user(kevent, buf);
+ free_kevent(kevent);
+ if (ret < 0)
+ break;
+ buf += ret;
+ count -= ret;
+ continue;
}
- schedule();
- }
-
- finish_wait(&dev->wq, &wait);
- if (ret)
- return ret;
-
- while (1) {
- struct inotify_kernel_event *kevent;
-
- ret = buf - start;
- if (list_empty(&dev->events))
+ ret = -EAGAIN;
+ if (file->f_flags & O_NONBLOCK)
break;
-
- kevent = inotify_dev_get_event(dev);
- if (event_size + kevent->event.len > count) {
- if (ret == 0 && count > 0) {
- /*
- * could not get a single event because we
- * didn't have enough buffer space.
- */
- ret = -EINVAL;
- }
+ ret = -EINTR;
+ if (signal_pending(current))
break;
- }
- remove_kevent(dev, kevent);
- /*
- * Must perform the copy_to_user outside the mutex in order
- * to avoid a lock order reversal with mmap_sem.
- */
- mutex_unlock(&dev->ev_mutex);
-
- if (copy_to_user(buf, &kevent->event, event_size)) {
- ret = -EFAULT;
+ if (start != buf)
break;
- }
- buf += event_size;
- count -= event_size;
-
- if (kevent->name) {
- if (copy_to_user(buf, kevent->name, kevent->event.len)){
- ret = -EFAULT;
- break;
- }
- buf += kevent->event.len;
- count -= kevent->event.len;
- }
-
- free_kevent(kevent);
- mutex_lock(&dev->ev_mutex);
+ schedule();
}
- mutex_unlock(&dev->ev_mutex);
+ finish_wait(&dev->wq, &wait);
+ if (start != buf && ret != -EFAULT)
+ ret = buf - start;
return ret;
}
--- /dev/null
+config NTFS_FS
+ tristate "NTFS file system support"
+ select NLS
+ help
+ NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
+
+ Saying Y or M here enables read support. There is partial, but
+ safe, write support available. For write support you must also
+ say Y to "NTFS write support" below.
+
+ There are also a number of user-space tools available, called
+ ntfsprogs. These include ntfsundelete and ntfsresize, that work
+ without NTFS support enabled in the kernel.
+
+ This is a rewrite from scratch of Linux NTFS support and replaced
+ the old NTFS code starting with Linux 2.5.11. A backport to
+ the Linux 2.4 kernel series is separately available as a patch
+ from the project web site.
+
+ For more information see <file:Documentation/filesystems/ntfs.txt>
+ and <http://www.linux-ntfs.org/>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ntfs.
+
+ If you are not using Windows NT, 2000, XP or 2003 in addition to
+ Linux on your computer it is safe to say N.
+
+config NTFS_DEBUG
+ bool "NTFS debugging support"
+ depends on NTFS_FS
+ help
+ If you are experiencing any problems with the NTFS file system, say
+ Y here. This will result in additional consistency checks to be
+ performed by the driver as well as additional debugging messages to
+ be written to the system log. Note that debugging messages are
+ disabled by default. To enable them, supply the option debug_msgs=1
+ at the kernel command line when booting the kernel or as an option
+ to insmod when loading the ntfs module. Once the driver is active,
+ you can enable debugging messages by doing (as root):
+ echo 1 > /proc/sys/fs/ntfs-debug
+ Replacing the "1" with "0" would disable debug messages.
+
+ If you leave debugging messages disabled, this results in little
+ overhead, but enabling debug messages results in very significant
+ slowdown of the system.
+
+ When reporting bugs, please try to have available a full dump of
+ debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+ bool "NTFS write support"
+ depends on NTFS_FS
+ help
+ This enables the partial, but safe, write support in the NTFS driver.
+
+ The only supported operation is overwriting existing files, without
+ changing the file length. No file or directory creation, deletion or
+ renaming is possible. Note only non-resident files can be written to
+ so you may find that some very small files (<500 bytes or so) cannot
+ be written to.
+
+ While we cannot guarantee that it will not damage any data, we have
+ so far not received a single report where the driver would have
+ damaged someones data so we assume it is perfectly safe to use.
+
+ Note: While write support is safe in this version (a rewrite from
+ scratch of the NTFS support), it should be noted that the old NTFS
+ write support, included in Linux 2.5.10 and before (since 1997),
+ is not safe.
+
+ This is currently useful with TopologiLinux. TopologiLinux is run
+ on top of any DOS/Microsoft Windows system without partitioning your
+ hard disk. Unlike other Linux distributions TopologiLinux does not
+ need its own partition. For more information see
+ <http://topologi-linux.sourceforge.net/>
+
+ It is perfectly safe to say N here.
--- /dev/null
+config OCFS2_FS
+ tristate "OCFS2 file system support"
+ depends on NET && SYSFS
+ select CONFIGFS_FS
+ select JBD2
+ select CRC32
+ select QUOTA
+ select QUOTA_TREE
+ help
+ OCFS2 is a general purpose extent based shared disk cluster file
+ system with many similarities to ext3. It supports 64 bit inode
+ numbers, and has automatically extending metadata groups which may
+ also make it attractive for non-clustered use.
+
+ You'll want to install the ocfs2-tools package in order to at least
+ get "mount.ocfs2".
+
+ Project web page: http://oss.oracle.com/projects/ocfs2
+ Tools web page: http://oss.oracle.com/projects/ocfs2-tools
+ OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+
+ For more information on OCFS2, see the file
+ <file:Documentation/filesystems/ocfs2.txt>.
+
+config OCFS2_FS_O2CB
+ tristate "O2CB Kernelspace Clustering"
+ depends on OCFS2_FS
+ default y
+ help
+ OCFS2 includes a simple kernelspace clustering package, the OCFS2
+ Cluster Base. It only requires a very small userspace component
+ to configure it. This comes with the standard ocfs2-tools package.
+ O2CB is limited to maintaining a cluster for OCFS2 file systems.
+ It cannot manage any other cluster applications.
+
+ It is always safe to say Y here, as the clustering method is
+ run-time selectable.
+
+config OCFS2_FS_USERSPACE_CLUSTER
+ tristate "OCFS2 Userspace Clustering"
+ depends on OCFS2_FS && DLM
+ default y
+ help
+ This option will allow OCFS2 to use userspace clustering services
+ in conjunction with the DLM in fs/dlm. If you are using a
+ userspace cluster manager, say Y here.
+
+ It is safe to say Y, as the clustering method is run-time
+ selectable.
+
+config OCFS2_FS_STATS
+ bool "OCFS2 statistics"
+ depends on OCFS2_FS
+ default y
+ help
+ This option allows some fs statistics to be captured. Enabling
+ this option may increase the memory consumption.
+
+config OCFS2_DEBUG_MASKLOG
+ bool "OCFS2 logging support"
+ depends on OCFS2_FS
+ default y
+ help
+ The ocfs2 filesystem has an extensive logging system. The system
+ allows selection of events to log via files in /sys/o2cb/logmask/.
+ This option will enlarge your kernel, but it allows debugging of
+ ocfs2 filesystem issues.
+
+config OCFS2_DEBUG_FS
+ bool "OCFS2 expensive checks"
+ depends on OCFS2_FS
+ default n
+ help
+ This option will enable expensive consistency checks. Enable
+ this option for debugging only as it is likely to decrease
+ performance of the filesystem.
+
+config OCFS2_FS_POSIX_ACL
+ bool "OCFS2 POSIX Access Control Lists"
+ depends on OCFS2_FS
+ select FS_POSIX_ACL
+ default n
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
return status;
}
-/* This is difficult. We have to lock quota inode and start transaction
- * in this function but we don't want to take the penalty of exlusive
- * quota file lock when we are just going to use cached structures. So
- * we just take read lock check whether we have dquot cached and if so,
- * we don't have to take the write lock... */
-static int ocfs2_dquot_initialize(struct inode *inode, int type)
-{
- handle_t *handle = NULL;
- int status = 0;
- struct super_block *sb = inode->i_sb;
- struct ocfs2_mem_dqinfo *oinfo;
- int exclusive = 0;
- int cnt;
- qid_t id;
-
- mlog_entry_void();
-
- for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- if (type != -1 && cnt != type)
- continue;
- if (!sb_has_quota_active(sb, cnt))
- continue;
- oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
- status = ocfs2_lock_global_qf(oinfo, 0);
- if (status < 0)
- goto out;
- /* This is just a performance optimization not a reliable test.
- * Since we hold an inode lock, noone can actually release
- * the structure until we are finished with initialization. */
- if (inode->i_dquot[cnt] != NODQUOT) {
- ocfs2_unlock_global_qf(oinfo, 0);
- continue;
- }
- /* When we have inode lock, we know that no dquot_release() can
- * run and thus we can safely check whether we need to
- * read+modify global file to get quota information or whether
- * our node already has it. */
- if (cnt == USRQUOTA)
- id = inode->i_uid;
- else if (cnt == GRPQUOTA)
- id = inode->i_gid;
- else
- BUG();
- /* Obtain exclusion from quota off... */
- down_write(&sb_dqopt(sb)->dqptr_sem);
- exclusive = !dquot_is_cached(sb, id, cnt);
- up_write(&sb_dqopt(sb)->dqptr_sem);
- if (exclusive) {
- status = ocfs2_lock_global_qf(oinfo, 1);
- if (status < 0) {
- exclusive = 0;
- mlog_errno(status);
- goto out_ilock;
- }
- handle = ocfs2_start_trans(OCFS2_SB(sb),
- ocfs2_calc_qinit_credits(sb, cnt));
- if (IS_ERR(handle)) {
- status = PTR_ERR(handle);
- mlog_errno(status);
- goto out_ilock;
- }
- }
- dquot_initialize(inode, cnt);
- if (exclusive) {
- ocfs2_commit_trans(OCFS2_SB(sb), handle);
- ocfs2_unlock_global_qf(oinfo, 1);
- }
- ocfs2_unlock_global_qf(oinfo, 0);
- }
- mlog_exit(0);
- return 0;
-out_ilock:
- if (exclusive)
- ocfs2_unlock_global_qf(oinfo, 1);
- ocfs2_unlock_global_qf(oinfo, 0);
-out:
- mlog_exit(status);
- return status;
-}
-
-static int ocfs2_dquot_drop_slow(struct inode *inode)
-{
- int status = 0;
- int cnt;
- int got_lock[MAXQUOTAS] = {0, 0};
- handle_t *handle;
- struct super_block *sb = inode->i_sb;
- struct ocfs2_mem_dqinfo *oinfo;
-
- for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- if (!sb_has_quota_active(sb, cnt))
- continue;
- oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
- status = ocfs2_lock_global_qf(oinfo, 1);
- if (status < 0)
- goto out;
- got_lock[cnt] = 1;
- }
- handle = ocfs2_start_trans(OCFS2_SB(sb),
- ocfs2_calc_qinit_credits(sb, USRQUOTA) +
- ocfs2_calc_qinit_credits(sb, GRPQUOTA));
- if (IS_ERR(handle)) {
- status = PTR_ERR(handle);
- mlog_errno(status);
- goto out;
- }
- dquot_drop(inode);
- ocfs2_commit_trans(OCFS2_SB(sb), handle);
-out:
- for (cnt = 0; cnt < MAXQUOTAS; cnt++)
- if (got_lock[cnt]) {
- oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
- ocfs2_unlock_global_qf(oinfo, 1);
- }
- return status;
-}
-
-/* See the comment before ocfs2_dquot_initialize. */
-static int ocfs2_dquot_drop(struct inode *inode)
-{
- int status = 0;
- struct super_block *sb = inode->i_sb;
- struct ocfs2_mem_dqinfo *oinfo;
- int exclusive = 0;
- int cnt;
- int got_lock[MAXQUOTAS] = {0, 0};
-
- mlog_entry_void();
- for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- if (!sb_has_quota_active(sb, cnt))
- continue;
- oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
- status = ocfs2_lock_global_qf(oinfo, 0);
- if (status < 0)
- goto out;
- got_lock[cnt] = 1;
- }
- /* Lock against anyone releasing references so that when when we check
- * we know we are not going to be last ones to release dquot */
- down_write(&sb_dqopt(sb)->dqptr_sem);
- /* Urgh, this is a terrible hack :( */
- for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- if (inode->i_dquot[cnt] != NODQUOT &&
- atomic_read(&inode->i_dquot[cnt]->dq_count) > 1) {
- exclusive = 1;
- break;
- }
- }
- if (!exclusive)
- dquot_drop_locked(inode);
- up_write(&sb_dqopt(sb)->dqptr_sem);
-out:
- for (cnt = 0; cnt < MAXQUOTAS; cnt++)
- if (got_lock[cnt]) {
- oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
- ocfs2_unlock_global_qf(oinfo, 0);
- }
- /* In case we bailed out because we had to do expensive locking
- * do it now... */
- if (exclusive)
- status = ocfs2_dquot_drop_slow(inode);
- mlog_exit(status);
- return status;
-}
-
static struct dquot *ocfs2_alloc_dquot(struct super_block *sb, int type)
{
struct ocfs2_dquot *dquot =
}
struct dquot_operations ocfs2_quota_operations = {
- .initialize = ocfs2_dquot_initialize,
- .drop = ocfs2_dquot_drop,
+ .initialize = dquot_initialize,
+ .drop = dquot_drop,
.alloc_space = dquot_alloc_space,
.alloc_inode = dquot_alloc_inode,
.free_space = dquot_free_space,
--- /dev/null
+config OMFS_FS
+ tristate "SonicBlue Optimized MPEG File System support"
+ depends on BLOCK
+ select CRC_ITU_T
+ help
+ This is the proprietary file system used by the Rio Karma music
+ player and ReplayTV DVR. Despite the name, this filesystem is not
+ more efficient than a standard FS for MPEG files, in fact likely
+ the opposite is true. Say Y if you have either of these devices
+ and wish to mount its disk.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called omfs. If unsure, say N.
--- /dev/null
+config QNX4FS_FS
+ tristate "QNX4 file system support (read only)"
+ depends on BLOCK
+ help
+ This is the file system used by the real-time operating systems
+ QNX 4 and QNX 6 (the latter is also called QNX RTP).
+ Further information is available at <http://www.qnx.com/>.
+ Say Y if you intend to mount QNX hard disks or floppies.
+ Unless you say Y to "QNX4FS read-write support" below, you will
+ only be able to read these file systems.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called qnx4.
+
+ If you don't know whether you need it, then you don't need it:
+ answer N.
+
+config QNX4FS_RW
+ bool "QNX4FS write support (DANGEROUS)"
+ depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
+ help
+ Say Y if you want to test write support for QNX4 file systems.
+
+ It's currently broken, so for now:
+ answer N.
--- /dev/null
+config REISERFS_FS
+ tristate "Reiserfs support"
+ help
+ Stores not just filenames but the files themselves in a balanced
+ tree. Uses journalling.
+
+ Balanced trees are more efficient than traditional file system
+ architectural foundations.
+
+ In general, ReiserFS is as fast as ext2, but is very efficient with
+ large directories and small files. Additional patches are needed
+ for NFS and quotas, please see <http://www.namesys.com/> for links.
+
+ It is more easily extended to have features currently found in
+ database and keyword search systems than block allocation based file
+ systems are. The next version will be so extended, and will support
+ plugins consistent with our motto ``It takes more than a license to
+ make source code open.''
+
+ Read <http://www.namesys.com/> to learn more about reiserfs.
+
+ Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+ If you like it, you can pay us to add new features to it that you
+ need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+ bool "Enable reiserfs debug mode"
+ depends on REISERFS_FS
+ help
+ If you set this to Y, then ReiserFS will perform every check it can
+ possibly imagine of its internal consistency throughout its
+ operation. It will also go substantially slower. More than once we
+ have forgotten that this was on, and then gone despondent over the
+ latest benchmarks.:-) Use of this option allows our team to go all
+ out in checking for consistency when debugging without fear of its
+ effect on end users. If you are on the verge of sending in a bug
+ report, say Y and you might get a useful error message. Almost
+ everyone should say N.
+
+config REISERFS_PROC_INFO
+ bool "Stats in /proc/fs/reiserfs"
+ depends on REISERFS_FS && PROC_FS
+ help
+ Create under /proc/fs/reiserfs a hierarchy of files, displaying
+ various ReiserFS statistics and internal data at the expense of
+ making your kernel or module slightly larger (+8 KB). This also
+ increases the amount of kernel memory required for each mount.
+ Almost everyone but ReiserFS developers and people fine-tuning
+ reiserfs or tracing problems should say N.
+
+config REISERFS_FS_XATTR
+ bool "ReiserFS extended attributes"
+ depends on REISERFS_FS
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config REISERFS_FS_POSIX_ACL
+ bool "ReiserFS POSIX Access Control Lists"
+ depends on REISERFS_FS_XATTR
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config REISERFS_FS_SECURITY
+ bool "ReiserFS Security Labels"
+ depends on REISERFS_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ReiserFS filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
--- /dev/null
+config ROMFS_FS
+ tristate "ROM file system support"
+ depends on BLOCK
+ ---help---
+ This is a very small read-only file system mainly intended for
+ initial ram disks of installation disks, but it could be used for
+ other read-only media as well. Read
+ <file:Documentation/filesystems/romfs.txt> for details.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called romfs. Note that the file system of your
+ root partition (the one containing the directory /) cannot be a
+ module.
+
+ If you don't know whether you need it, then you don't need it:
+ answer N.
--- /dev/null
+config SMB_FS
+ tristate "SMB file system support (OBSOLETE, please use CIFS)"
+ depends on INET
+ select NLS
+ help
+ SMB (Server Message Block) is the protocol Windows for Workgroups
+ (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+ files and printers over local networks. Saying Y here allows you to
+ mount their file systems (often called "shares" in this context) and
+ access them just like any other Unix directory. Currently, this
+ works only if the Windows machines use TCP/IP as the underlying
+ transport protocol, and not NetBEUI. For details, read
+ <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ Note: if you just want your box to act as an SMB *server* and make
+ files and printing services available to Windows clients (which need
+ to have a TCP/IP stack), you don't need to say Y here; you can use
+ the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+ for that.
+
+ General information about how to connect Linux, Windows machines and
+ Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+ To compile the SMB support as a module, choose M here:
+ the module will be called smbfs. Most people say N, however.
+
+config SMB_NLS_DEFAULT
+ bool "Use a default NLS"
+ depends on SMB_FS
+ help
+ Enabling this will make smbfs use nls translations by default. You
+ need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+ settings and you need to give the default nls for the SMB server as
+ CONFIG_SMB_NLS_REMOTE.
+
+ The nls settings can be changed at mount time, if your smbmount
+ supports that, using the codepage and iocharset parameters.
+
+ smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+ string "Default Remote NLS Option"
+ depends on SMB_NLS_DEFAULT
+ default "cp437"
+ help
+ This setting allows you to specify a default value for which
+ codepage the server uses. If this field is left blank no
+ translations will be done by default. The local codepage/charset
+ default to CONFIG_NLS_DEFAULT.
+
+ The nls settings can be changed at mount time, if your smbmount
+ supports that, using the codepage and iocharset parameters.
+
+ smbmount from samba 2.2.0 or later supports this.
--- /dev/null
+config SQUASHFS
+ tristate "SquashFS 4.0 - Squashed file system support"
+ depends on BLOCK
+ select ZLIB_INFLATE
+ help
+ Saying Y here includes support for SquashFS 4.0 (a Compressed
+ Read-Only File System). Squashfs is a highly compressed read-only
+ filesystem for Linux. It uses zlib compression to compress both
+ files, inodes and directories. Inodes in the system are very small
+ and all blocks are packed to minimise data overhead. Block sizes
+ greater than 4K are supported up to a maximum of 1 Mbytes (default
+ block size 128K). SquashFS 4.0 supports 64 bit filesystems and files
+ (larger than 4GB), full uid/gid information, hard links and
+ timestamps.
+
+ Squashfs is intended for general read-only filesystem use, for
+ archival use (i.e. in cases where a .tar.gz file may be used), and in
+ embedded systems where low overhead is needed. Further information
+ and tools are available from http://squashfs.sourceforge.net.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called squashfs. Note that the root file system (the one
+ containing the directory /) cannot be compiled as a module.
+
+ If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+ bool "Additional option for memory-constrained systems"
+ depends on SQUASHFS
+ default n
+ help
+ Saying Y here allows you to specify cache size.
+
+ If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+ int "Number of fragments cached" if SQUASHFS_EMBEDDED
+ depends on SQUASHFS
+ default "3"
+ help
+ By default SquashFS caches the last 3 fragments read from
+ the filesystem. Increasing this amount may mean SquashFS
+ has to re-read fragments less often from disk, at the expense
+ of extra system memory. Decreasing this amount will mean
+ SquashFS uses less memory at the expense of extra reads from disk.
+
+ Note there must be at least one cached fragment. Anything
+ much more than three will probably not make much difference.
--- /dev/null
+config SYSFS
+ bool "sysfs file system support" if EMBEDDED
+ default y
+ help
+ The sysfs filesystem is a virtual filesystem that the kernel uses to
+ export internal kernel objects, their attributes, and their
+ relationships to one another.
+
+ Users can use sysfs to ascertain useful information about the running
+ kernel, such as the devices the kernel has discovered on each bus and
+ which driver each is bound to. sysfs can also be used to tune devices
+ and other kernel subsystems.
+
+ Some system agents rely on the information in sysfs to operate.
+ /sbin/hotplug uses device and object attributes in sysfs to assist in
+ delegating policy decisions, like persistently naming devices.
+
+ sysfs is currently used by the block subsystem to mount the root
+ partition. If sysfs is disabled you must specify the boot device on
+ the kernel boot command line via its major and minor numbers. For
+ example, "root=03:01" for /dev/hda1.
+
+ Designers of embedded systems may wish to say N here to conserve space.
int count = min_t(size_t, bytes, PAGE_SIZE);
char *temp;
+ if (!bytes)
+ return 0;
+
if (size) {
if (offs > size)
return 0;
int count = min_t(size_t, bytes, PAGE_SIZE);
char *temp;
+ if (!bytes)
+ return 0;
+
if (size) {
if (offs > size)
return 0;
--- /dev/null
+config SYSV_FS
+ tristate "System V/Xenix/V7/Coherent file system support"
+ depends on BLOCK
+ help
+ SCO, Xenix and Coherent are commercial Unix systems for Intel
+ machines, and Version 7 was used on the DEC PDP-11. Saying Y
+ here would allow you to read from their floppies and hard disk
+ partitions.
+
+ If you have floppies or hard disk partitions like that, it is likely
+ that they contain binaries from those other Unix systems; in order
+ to run these binaries, you will want to install linux-abi which is
+ a set of kernel modules that lets you run SCO, Xenix, Wyse,
+ UnixWare, Dell Unix and System V programs under Linux. It is
+ available via FTP (user: ftp) from
+ <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+ NOTE: that will work only for binaries from Intel-based systems;
+ PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+ If you only intend to mount files from some other Unix over the
+ network using NFS, you don't need the System V file system support
+ (but you need NFS file system support obviously).
+
+ Note that this option is generally not needed for floppies, since a
+ good portable way to transport files and directories between unixes
+ (and even other operating systems) is given by the tar program ("man
+ tar" or preferably "info tar"). Note also that this option has
+ nothing whatsoever to do with the option "System V IPC". Read about
+ the System V file system in
+ <file:Documentation/filesystems/sysv-fs.txt>.
+ Saying Y here will enlarge your kernel by about 27 KB.
+
+ To compile this as a module, choose M here: the module will be called
+ sysv.
+
+ If you haven't heard about all of this before, it's safe to say N.
--- /dev/null
+config UDF_FS
+ tristate "UDF file system support"
+ select CRC_ITU_T
+ help
+ This is the new file system used on some CD-ROMs and DVDs. Say Y if
+ you intend to mount DVD discs or CDRW's written in packet mode, or
+ if written to by other UDF utilities, such as DirectCD.
+ Please read <file:Documentation/filesystems/udf.txt>.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called udf.
+
+ If unsure, say N.
+
+config UDF_NLS
+ bool
+ default y
+ depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
--- /dev/null
+config UFS_FS
+ tristate "UFS file system support (read only)"
+ depends on BLOCK
+ help
+ BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+ OpenBSD and NeXTstep) use a file system called UFS. Some System V
+ Unixes can create and mount hard disk partitions and diskettes using
+ this file system as well. Saying Y here will allow you to read from
+ these partitions; if you also want to write to them, say Y to the
+ experimental "UFS file system write support", below. Please read the
+ file <file:Documentation/filesystems/ufs.txt> for more information.
+
+ The recently released UFS2 variant (used in FreeBSD 5.x) is
+ READ-ONLY supported.
+
+ Note that this option is generally not needed for floppies, since a
+ good portable way to transport files and directories between unixes
+ (and even other operating systems) is given by the tar program ("man
+ tar" or preferably "info tar").
+
+ When accessing NeXTstep files, you may need to convert them from the
+ NeXT character set to the Latin1 character set; use the program
+ recode ("info recode") for this purpose.
+
+ To compile the UFS file system support as a module, choose M here: the
+ module will be called ufs.
+
+ If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+ bool "UFS file system write support (DANGEROUS)"
+ depends on UFS_FS && EXPERIMENTAL
+ help
+ Say Y here if you want to try writing to UFS partitions. This is
+ experimental, so you should back up your UFS partitions beforehand.
+
+config UFS_DEBUG
+ bool "UFS debugging"
+ depends on UFS_FS
+ help
+ If you are experiencing any problems with the UFS filesystem, say
+ Y here. This will result in _many_ additional debugging messages to be
+ written to the system log.
config XFS_FS
tristate "XFS filesystem support"
depends on BLOCK
+ select EXPORTFS
help
XFS is a high performance journaling filesystem which originated
on the SGI IRIX platform. It is completely multi-threaded, can
#include "xfs_vnodeops.h"
#include "xfs_quota.h"
#include "xfs_inode_item.h"
+#include "xfs_export.h"
#include <linux/capability.h>
#include <linux/dcache.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/pagemap.h>
+#include <linux/exportfs.h>
/*
* xfs_find_handle maps from userspace xfs_fsop_handlereq structure to
return 0;
}
-
/*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
+ * No need to do permission checks on the various pathname components
+ * as the handle operations are privileged.
*/
STATIC int
-xfs_vget_fsop_handlereq(
- xfs_mount_t *mp,
- struct inode *parinode, /* parent inode pointer */
- xfs_fsop_handlereq_t *hreq,
- struct inode **inode)
+xfs_handle_acceptable(
+ void *context,
+ struct dentry *dentry)
+{
+ return 1;
+}
+
+/*
+ * Convert userspace handle data into a dentry.
+ */
+struct dentry *
+xfs_handle_to_dentry(
+ struct file *parfilp,
+ void __user *uhandle,
+ u32 hlen)
{
- void __user *hanp;
- size_t hlen;
- xfs_fid_t *xfid;
- xfs_handle_t *handlep;
xfs_handle_t handle;
- xfs_inode_t *ip;
- xfs_ino_t ino;
- __u32 igen;
- int error;
+ struct xfs_fid64 fid;
/*
* Only allow handle opens under a directory.
*/
- if (!S_ISDIR(parinode->i_mode))
- return XFS_ERROR(ENOTDIR);
-
- hanp = hreq->ihandle;
- hlen = hreq->ihandlen;
- handlep = &handle;
-
- if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
- return XFS_ERROR(EINVAL);
- if (copy_from_user(handlep, hanp, hlen))
- return XFS_ERROR(EFAULT);
- if (hlen < sizeof(*handlep))
- memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
- if (hlen > sizeof(handlep->ha_fsid)) {
- if (handlep->ha_fid.fid_len !=
- (hlen - sizeof(handlep->ha_fsid) -
- sizeof(handlep->ha_fid.fid_len)) ||
- handlep->ha_fid.fid_pad)
- return XFS_ERROR(EINVAL);
- }
-
- /*
- * Crack the handle, obtain the inode # & generation #
- */
- xfid = (struct xfs_fid *)&handlep->ha_fid;
- if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
- ino = xfid->fid_ino;
- igen = xfid->fid_gen;
- } else {
- return XFS_ERROR(EINVAL);
- }
-
- /*
- * Get the XFS inode, building a Linux inode to go with it.
- */
- error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
- if (error)
- return error;
- if (ip == NULL)
- return XFS_ERROR(EIO);
- if (ip->i_d.di_gen != igen) {
- xfs_iput_new(ip, XFS_ILOCK_SHARED);
- return XFS_ERROR(ENOENT);
- }
-
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
+ if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode))
+ return ERR_PTR(-ENOTDIR);
+
+ if (hlen != sizeof(xfs_handle_t))
+ return ERR_PTR(-EINVAL);
+ if (copy_from_user(&handle, uhandle, hlen))
+ return ERR_PTR(-EFAULT);
+ if (handle.ha_fid.fid_len !=
+ sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len))
+ return ERR_PTR(-EINVAL);
+
+ memset(&fid, 0, sizeof(struct fid));
+ fid.ino = handle.ha_fid.fid_ino;
+ fid.gen = handle.ha_fid.fid_gen;
+
+ return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3,
+ FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG,
+ xfs_handle_acceptable, NULL);
+}
- *inode = VFS_I(ip);
- return 0;
+STATIC struct dentry *
+xfs_handlereq_to_dentry(
+ struct file *parfilp,
+ xfs_fsop_handlereq_t *hreq)
+{
+ return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen);
}
int
xfs_open_by_handle(
- xfs_mount_t *mp,
- xfs_fsop_handlereq_t *hreq,
struct file *parfilp,
- struct inode *parinode)
+ xfs_fsop_handlereq_t *hreq)
{
const struct cred *cred = current_cred();
int error;
- int new_fd;
+ int fd;
int permflag;
struct file *filp;
struct inode *inode;
if (!capable(CAP_SYS_ADMIN))
return -XFS_ERROR(EPERM);
- error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
- if (error)
- return -error;
+ dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+ inode = dentry->d_inode;
/* Restrict xfs_open_by_handle to directories & regular files. */
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) {
- iput(inode);
- return -XFS_ERROR(EINVAL);
+ error = -XFS_ERROR(EPERM);
+ goto out_dput;
}
#if BITS_PER_LONG != 32
hreq->oflags |= O_LARGEFILE;
#endif
+
/* Put open permission in namei format. */
permflag = hreq->oflags;
if ((permflag+1) & O_ACCMODE)
if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) &&
(permflag & FMODE_WRITE) && IS_APPEND(inode)) {
- iput(inode);
- return -XFS_ERROR(EPERM);
+ error = -XFS_ERROR(EPERM);
+ goto out_dput;
}
if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) {
- iput(inode);
- return -XFS_ERROR(EACCES);
+ error = -XFS_ERROR(EACCES);
+ goto out_dput;
}
/* Can't write directories. */
- if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
- iput(inode);
- return -XFS_ERROR(EISDIR);
+ if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
+ error = -XFS_ERROR(EISDIR);
+ goto out_dput;
}
- if ((new_fd = get_unused_fd()) < 0) {
- iput(inode);
- return new_fd;
+ fd = get_unused_fd();
+ if (fd < 0) {
+ error = fd;
+ goto out_dput;
}
- dentry = d_obtain_alias(inode);
- if (IS_ERR(dentry)) {
- put_unused_fd(new_fd);
- return PTR_ERR(dentry);
- }
-
- /* Ensure umount returns EBUSY on umounts while this file is open. */
- mntget(parfilp->f_path.mnt);
-
- /* Create file pointer. */
- filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred);
+ filp = dentry_open(dentry, mntget(parfilp->f_path.mnt),
+ hreq->oflags, cred);
if (IS_ERR(filp)) {
- put_unused_fd(new_fd);
- return -XFS_ERROR(-PTR_ERR(filp));
+ put_unused_fd(fd);
+ return PTR_ERR(filp);
}
if (inode->i_mode & S_IFREG) {
- /* invisible operation should not change atime */
filp->f_flags |= O_NOATIME;
filp->f_mode |= FMODE_NOCMTIME;
}
- fd_install(new_fd, filp);
- return new_fd;
+ fd_install(fd, filp);
+ return fd;
+
+ out_dput:
+ dput(dentry);
+ return error;
}
/*
int
xfs_readlink_by_handle(
- xfs_mount_t *mp,
- xfs_fsop_handlereq_t *hreq,
- struct inode *parinode)
+ struct file *parfilp,
+ xfs_fsop_handlereq_t *hreq)
{
- struct inode *inode;
+ struct dentry *dentry;
__u32 olen;
void *link;
int error;
if (!capable(CAP_SYS_ADMIN))
return -XFS_ERROR(EPERM);
- error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
- if (error)
- return -error;
+ dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
/* Restrict this handle operation to symlinks only. */
- if (!S_ISLNK(inode->i_mode)) {
+ if (!S_ISLNK(dentry->d_inode->i_mode)) {
error = -XFS_ERROR(EINVAL);
- goto out_iput;
+ goto out_dput;
}
if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) {
error = -XFS_ERROR(EFAULT);
- goto out_iput;
+ goto out_dput;
}
link = kmalloc(MAXPATHLEN+1, GFP_KERNEL);
- if (!link)
- goto out_iput;
+ if (!link) {
+ error = -XFS_ERROR(ENOMEM);
+ goto out_dput;
+ }
- error = -xfs_readlink(XFS_I(inode), link);
+ error = -xfs_readlink(XFS_I(dentry->d_inode), link);
if (error)
goto out_kfree;
error = do_readlink(hreq->ohandle, olen, link);
out_kfree:
kfree(link);
- out_iput:
- iput(inode);
+ out_dput:
+ dput(dentry);
return error;
}
STATIC int
xfs_fssetdm_by_handle(
- xfs_mount_t *mp,
- void __user *arg,
- struct inode *parinode)
+ struct file *parfilp,
+ void __user *arg)
{
int error;
struct fsdmidata fsd;
xfs_fsop_setdm_handlereq_t dmhreq;
- struct inode *inode;
+ struct dentry *dentry;
if (!capable(CAP_MKNOD))
return -XFS_ERROR(EPERM);
if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t)))
return -XFS_ERROR(EFAULT);
- error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode);
- if (error)
- return -error;
+ dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
- if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+ if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
error = -XFS_ERROR(EPERM);
goto out;
}
goto out;
}
- error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+ error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
fsd.fsd_dmstate);
out:
- iput(inode);
+ dput(dentry);
return error;
}
STATIC int
xfs_attrlist_by_handle(
- xfs_mount_t *mp,
- void __user *arg,
- struct inode *parinode)
+ struct file *parfilp,
+ void __user *arg)
{
- int error;
+ int error = -ENOMEM;
attrlist_cursor_kern_t *cursor;
xfs_fsop_attrlist_handlereq_t al_hreq;
- struct inode *inode;
+ struct dentry *dentry;
char *kbuf;
if (!capable(CAP_SYS_ADMIN))
if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
return -XFS_ERROR(EINVAL);
- error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode);
- if (error)
- goto out;
+ dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
if (!kbuf)
- goto out_vn_rele;
+ goto out_dput;
cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
- error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+ error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
al_hreq.flags, cursor);
if (error)
goto out_kfree;
out_kfree:
kfree(kbuf);
- out_vn_rele:
- iput(inode);
- out:
- return -error;
+ out_dput:
+ dput(dentry);
+ return error;
}
int
STATIC int
xfs_attrmulti_by_handle(
- xfs_mount_t *mp,
- void __user *arg,
struct file *parfilp,
- struct inode *parinode)
+ void __user *arg)
{
int error;
xfs_attr_multiop_t *ops;
xfs_fsop_attrmulti_handlereq_t am_hreq;
- struct inode *inode;
+ struct dentry *dentry;
unsigned int i, size;
char *attr_name;
if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t)))
return -XFS_ERROR(EFAULT);
- error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode);
- if (error)
- goto out;
+ dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
error = E2BIG;
size = am_hreq.opcount * sizeof(xfs_attr_multiop_t);
if (!size || size > 16 * PAGE_SIZE)
- goto out_vn_rele;
+ goto out_dput;
error = ENOMEM;
ops = kmalloc(size, GFP_KERNEL);
if (!ops)
- goto out_vn_rele;
+ goto out_dput;
error = EFAULT;
if (copy_from_user(ops, am_hreq.ops, size))
switch (ops[i].am_opcode) {
case ATTR_OP_GET:
- ops[i].am_error = xfs_attrmulti_attr_get(inode,
- attr_name, ops[i].am_attrvalue,
- &ops[i].am_length, ops[i].am_flags);
+ ops[i].am_error = xfs_attrmulti_attr_get(
+ dentry->d_inode, attr_name,
+ ops[i].am_attrvalue, &ops[i].am_length,
+ ops[i].am_flags);
break;
case ATTR_OP_SET:
ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
if (ops[i].am_error)
break;
- ops[i].am_error = xfs_attrmulti_attr_set(inode,
- attr_name, ops[i].am_attrvalue,
- ops[i].am_length, ops[i].am_flags);
+ ops[i].am_error = xfs_attrmulti_attr_set(
+ dentry->d_inode, attr_name,
+ ops[i].am_attrvalue, ops[i].am_length,
+ ops[i].am_flags);
mnt_drop_write(parfilp->f_path.mnt);
break;
case ATTR_OP_REMOVE:
ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
if (ops[i].am_error)
break;
- ops[i].am_error = xfs_attrmulti_attr_remove(inode,
- attr_name, ops[i].am_flags);
+ ops[i].am_error = xfs_attrmulti_attr_remove(
+ dentry->d_inode, attr_name,
+ ops[i].am_flags);
mnt_drop_write(parfilp->f_path.mnt);
break;
default:
kfree(attr_name);
out_kfree_ops:
kfree(ops);
- out_vn_rele:
- iput(inode);
- out:
+ out_dput:
+ dput(dentry);
return -error;
}
if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
return -XFS_ERROR(EFAULT);
- return xfs_open_by_handle(mp, &hreq, filp, inode);
+ return xfs_open_by_handle(filp, &hreq);
}
case XFS_IOC_FSSETDM_BY_HANDLE:
- return xfs_fssetdm_by_handle(mp, arg, inode);
+ return xfs_fssetdm_by_handle(filp, arg);
case XFS_IOC_READLINK_BY_HANDLE: {
xfs_fsop_handlereq_t hreq;
if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
return -XFS_ERROR(EFAULT);
- return xfs_readlink_by_handle(mp, &hreq, inode);
+ return xfs_readlink_by_handle(filp, &hreq);
}
case XFS_IOC_ATTRLIST_BY_HANDLE:
- return xfs_attrlist_by_handle(mp, arg, inode);
+ return xfs_attrlist_by_handle(filp, arg);
case XFS_IOC_ATTRMULTI_BY_HANDLE:
- return xfs_attrmulti_by_handle(mp, arg, filp, inode);
+ return xfs_attrmulti_by_handle(filp, arg);
case XFS_IOC_SWAPEXT: {
struct xfs_swapext sxp;
extern int
xfs_open_by_handle(
- xfs_mount_t *mp,
- xfs_fsop_handlereq_t *hreq,
struct file *parfilp,
- struct inode *parinode);
+ xfs_fsop_handlereq_t *hreq);
extern int
xfs_readlink_by_handle(
- xfs_mount_t *mp,
- xfs_fsop_handlereq_t *hreq,
- struct inode *parinode);
+ struct file *parfilp,
+ xfs_fsop_handlereq_t *hreq);
extern int
xfs_attrmulti_attr_get(
char *name,
__uint32_t flags);
+extern struct dentry *
+xfs_handle_to_dentry(
+ struct file *parfilp,
+ void __user *uhandle,
+ u32 hlen);
+
extern long
xfs_file_ioctl(
struct file *filp,
*/
#include <linux/compat.h>
#include <linux/ioctl.h>
+#include <linux/mount.h>
#include <asm/uaccess.h>
#include "xfs.h"
#include "xfs_fs.h"
return 0;
}
-/*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
- */
-STATIC int
-xfs_vget_fsop_handlereq_compat(
- xfs_mount_t *mp,
- struct inode *parinode, /* parent inode pointer */
- compat_xfs_fsop_handlereq_t *hreq,
- struct inode **inode)
+STATIC struct dentry *
+xfs_compat_handlereq_to_dentry(
+ struct file *parfilp,
+ compat_xfs_fsop_handlereq_t *hreq)
{
- void __user *hanp;
- size_t hlen;
- xfs_fid_t *xfid;
- xfs_handle_t *handlep;
- xfs_handle_t handle;
- xfs_inode_t *ip;
- xfs_ino_t ino;
- __u32 igen;
- int error;
-
- /*
- * Only allow handle opens under a directory.
- */
- if (!S_ISDIR(parinode->i_mode))
- return XFS_ERROR(ENOTDIR);
-
- hanp = compat_ptr(hreq->ihandle);
- hlen = hreq->ihandlen;
- handlep = &handle;
-
- if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
- return XFS_ERROR(EINVAL);
- if (copy_from_user(handlep, hanp, hlen))
- return XFS_ERROR(EFAULT);
- if (hlen < sizeof(*handlep))
- memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
- if (hlen > sizeof(handlep->ha_fsid)) {
- if (handlep->ha_fid.fid_len !=
- (hlen - sizeof(handlep->ha_fsid) -
- sizeof(handlep->ha_fid.fid_len)) ||
- handlep->ha_fid.fid_pad)
- return XFS_ERROR(EINVAL);
- }
-
- /*
- * Crack the handle, obtain the inode # & generation #
- */
- xfid = (struct xfs_fid *)&handlep->ha_fid;
- if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
- ino = xfid->fid_ino;
- igen = xfid->fid_gen;
- } else {
- return XFS_ERROR(EINVAL);
- }
-
- /*
- * Get the XFS inode, building a Linux inode to go with it.
- */
- error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
- if (error)
- return error;
- if (ip == NULL)
- return XFS_ERROR(EIO);
- if (ip->i_d.di_gen != igen) {
- xfs_iput_new(ip, XFS_ILOCK_SHARED);
- return XFS_ERROR(ENOENT);
- }
-
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
- *inode = VFS_I(ip);
- return 0;
+ return xfs_handle_to_dentry(parfilp,
+ compat_ptr(hreq->ihandle), hreq->ihandlen);
}
STATIC int
xfs_compat_attrlist_by_handle(
- xfs_mount_t *mp,
- void __user *arg,
- struct inode *parinode)
+ struct file *parfilp,
+ void __user *arg)
{
int error;
attrlist_cursor_kern_t *cursor;
compat_xfs_fsop_attrlist_handlereq_t al_hreq;
- struct inode *inode;
+ struct dentry *dentry;
char *kbuf;
if (!capable(CAP_SYS_ADMIN))
if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
return -XFS_ERROR(EINVAL);
- error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq,
- &inode);
- if (error)
- goto out;
+ dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+ error = -ENOMEM;
kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
if (!kbuf)
- goto out_vn_rele;
+ goto out_dput;
cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
- error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+ error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
al_hreq.flags, cursor);
if (error)
goto out_kfree;
out_kfree:
kfree(kbuf);
- out_vn_rele:
- iput(inode);
- out:
- return -error;
+ out_dput:
+ dput(dentry);
+ return error;
}
STATIC int
xfs_compat_attrmulti_by_handle(
- xfs_mount_t *mp,
- void __user *arg,
- struct inode *parinode)
+ struct file *parfilp,
+ void __user *arg)
{
int error;
compat_xfs_attr_multiop_t *ops;
compat_xfs_fsop_attrmulti_handlereq_t am_hreq;
- struct inode *inode;
+ struct dentry *dentry;
unsigned int i, size;
char *attr_name;
sizeof(compat_xfs_fsop_attrmulti_handlereq_t)))
return -XFS_ERROR(EFAULT);
- error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq,
- &inode);
- if (error)
- goto out;
+ dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
error = E2BIG;
size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t);
if (!size || size > 16 * PAGE_SIZE)
- goto out_vn_rele;
+ goto out_dput;
error = ENOMEM;
ops = kmalloc(size, GFP_KERNEL);
if (!ops)
- goto out_vn_rele;
+ goto out_dput;
error = EFAULT;
if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
switch (ops[i].am_opcode) {
case ATTR_OP_GET:
- ops[i].am_error = xfs_attrmulti_attr_get(inode,
- attr_name,
+ ops[i].am_error = xfs_attrmulti_attr_get(
+ dentry->d_inode, attr_name,
compat_ptr(ops[i].am_attrvalue),
&ops[i].am_length, ops[i].am_flags);
break;
case ATTR_OP_SET:
- ops[i].am_error = xfs_attrmulti_attr_set(inode,
- attr_name,
+ ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+ if (ops[i].am_error)
+ break;
+ ops[i].am_error = xfs_attrmulti_attr_set(
+ dentry->d_inode, attr_name,
compat_ptr(ops[i].am_attrvalue),
ops[i].am_length, ops[i].am_flags);
+ mnt_drop_write(parfilp->f_path.mnt);
break;
case ATTR_OP_REMOVE:
- ops[i].am_error = xfs_attrmulti_attr_remove(inode,
- attr_name, ops[i].am_flags);
+ ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+ if (ops[i].am_error)
+ break;
+ ops[i].am_error = xfs_attrmulti_attr_remove(
+ dentry->d_inode, attr_name,
+ ops[i].am_flags);
+ mnt_drop_write(parfilp->f_path.mnt);
break;
default:
ops[i].am_error = EINVAL;
kfree(attr_name);
out_kfree_ops:
kfree(ops);
- out_vn_rele:
- iput(inode);
- out:
+ out_dput:
+ dput(dentry);
return -error;
}
STATIC int
xfs_compat_fssetdm_by_handle(
- xfs_mount_t *mp,
- void __user *arg,
- struct inode *parinode)
+ struct file *parfilp,
+ void __user *arg)
{
int error;
struct fsdmidata fsd;
compat_xfs_fsop_setdm_handlereq_t dmhreq;
- struct inode *inode;
+ struct dentry *dentry;
if (!capable(CAP_MKNOD))
return -XFS_ERROR(EPERM);
sizeof(compat_xfs_fsop_setdm_handlereq_t)))
return -XFS_ERROR(EFAULT);
- error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq,
- &inode);
- if (error)
- return -error;
+ dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
- if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+ if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
error = -XFS_ERROR(EPERM);
goto out;
}
goto out;
}
- error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+ error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
fsd.fsd_dmstate);
out:
- iput(inode);
+ dput(dentry);
return error;
}
if (xfs_compat_handlereq_copyin(&hreq, arg))
return -XFS_ERROR(EFAULT);
- return xfs_open_by_handle(mp, &hreq, filp, inode);
+ return xfs_open_by_handle(filp, &hreq);
}
case XFS_IOC_READLINK_BY_HANDLE_32: {
struct xfs_fsop_handlereq hreq;
if (xfs_compat_handlereq_copyin(&hreq, arg))
return -XFS_ERROR(EFAULT);
- return xfs_readlink_by_handle(mp, &hreq, inode);
+ return xfs_readlink_by_handle(filp, &hreq);
}
case XFS_IOC_ATTRLIST_BY_HANDLE_32:
- return xfs_compat_attrlist_by_handle(mp, arg, inode);
+ return xfs_compat_attrlist_by_handle(filp, arg);
case XFS_IOC_ATTRMULTI_BY_HANDLE_32:
- return xfs_compat_attrmulti_by_handle(mp, arg, inode);
+ return xfs_compat_attrmulti_by_handle(filp, arg);
case XFS_IOC_FSSETDM_BY_HANDLE_32:
- return xfs_compat_fssetdm_by_handle(mp, arg, inode);
+ return xfs_compat_fssetdm_by_handle(filp, arg);
default:
return -XFS_ERROR(ENOIOCTLCMD);
}
struct xfs_mount *mp = XFS_M(sb);
substring_t args[MAX_OPT_ARGS];
char *p;
+ int error;
while ((p = strsep(&options, ",")) != NULL) {
int token;
}
}
- /* rw/ro -> rw */
+ /* ro -> rw */
if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
mp->m_flags &= ~XFS_MOUNT_RDONLY;
if (mp->m_flags & XFS_MOUNT_BARRIER)
xfs_mountfs_check_barriers(mp);
+
+ /*
+ * If this is the first remount to writeable state we
+ * might have some superblock changes to update.
+ */
+ if (mp->m_update_flags) {
+ error = xfs_mount_log_sb(mp, mp->m_update_flags);
+ if (error) {
+ cmn_err(CE_WARN,
+ "XFS: failed to write sb changes");
+ return error;
+ }
+ mp->m_update_flags = 0;
+ }
}
/* rw -> ro */
int xfs_dqerror_mod = 33;
#endif
+static struct lock_class_key xfs_dquot_other_class;
+
/*
* Allocate and initialize a dquot. We don't always allocate fresh memory;
* we try to reclaim a free dquot if the number of incore dquots are above
ASSERT(dqp->q_trace);
xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT");
#endif
- }
+ }
+
+ /*
+ * In either case we need to make sure group quotas have a different
+ * lock class than user quotas, to make sure lockdep knows we can
+ * locks of one of each at the same time.
+ */
+ if (!(type & XFS_DQ_USER))
+ lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
/*
* log item gets initialized later
/*
* Initialize the bmap freelist prior to calling bmapi code.
*/
- XFS_BMAP_INIT(&flist, &firstblock);
+ xfs_bmap_init(&flist, &firstblock);
xfs_ilock(quotip, XFS_ILOCK_EXCL);
/*
* Return if this type of quotas is turned off while we didn't
mutex_unlock(&(dqp->q_qlock));
}
+/*
+ * Lock two xfs_dquot structures.
+ *
+ * To avoid deadlocks we always lock the quota structure with
+ * the lowerd id first.
+ */
void
xfs_dqlock2(
xfs_dquot_t *d1,
ASSERT(d1 != d2);
if (be32_to_cpu(d1->q_core.d_id) >
be32_to_cpu(d2->q_core.d_id)) {
- xfs_dqlock(d2);
- xfs_dqlock(d1);
+ mutex_lock(&d2->q_qlock);
+ mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED);
} else {
- xfs_dqlock(d1);
- xfs_dqlock(d2);
- }
- } else {
- if (d1) {
- xfs_dqlock(d1);
- } else if (d2) {
- xfs_dqlock(d2);
+ mutex_lock(&d1->q_qlock);
+ mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED);
}
+ } else if (d1) {
+ mutex_lock(&d1->q_qlock);
+ } else if (d2) {
+ mutex_lock(&d2->q_qlock);
}
}
#define dq_hashlist q_lists.dqm_hashlist
#define dq_flags q_lists.dqm_flags
+/*
+ * Lock hierachy for q_qlock:
+ * XFS_QLOCK_NORMAL is the implicit default,
+ * XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2
+ */
+enum {
+ XFS_QLOCK_NORMAL = 0,
+ XFS_QLOCK_NESTED,
+};
+
#define XFS_DQHOLD(dqp) ((dqp)->q_nrefs++)
#ifdef DEBUG
return 0;
}
+/*
+ * The hash chains and the mplist use the same xfs_dqhash structure as
+ * their list head, but we can take the mplist qh_lock and one of the
+ * hash qh_locks at the same time without any problem as they aren't
+ * related.
+ */
+static struct lock_class_key xfs_quota_mplist_class;
/*
* This initializes all the quota information that's kept in the
}
xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0);
+ lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class);
+
qinf->qi_dqreclaims = 0;
/* mutex used to serialize quotaoffs */
#define XFS_AG_CHECK_DADDR(mp,d,len) \
((len) == 1 ? \
ASSERT((d) == XFS_SB_DADDR || \
- XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \
- ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \
- XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1)))
+ xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \
+ ASSERT(xfs_daddr_to_agno(mp, d) == \
+ xfs_daddr_to_agno(mp, (d) + (len) - 1)))
#endif /* __XFS_AG_H__ */
xfs_agblock_t bno;
int error;
- bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp));
+ bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp));
error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1);
if (error)
return error;
* It won't fit in the shortform, transform to a leaf block.
* GROT: another possible req'mt for a double-split btree op.
*/
- XFS_BMAP_INIT(args.flist, args.firstblock);
+ xfs_bmap_init(args.flist, args.firstblock);
error = xfs_attr_shortform_to_leaf(&args);
if (!error) {
error = xfs_bmap_finish(&args.trans, args.flist,
* Commit that transaction so that the node_addname() call
* can manage its own transactions.
*/
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_attr_leaf_to_node(args);
if (!error) {
error = xfs_bmap_finish(&args->trans, args->flist,
* If the result is small enough, shrink it all into the inode.
*/
if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
if (!error) {
* If the result is small enough, shrink it all into the inode.
*/
if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
if (!error) {
* have been a b-tree.
*/
xfs_da_state_free(state);
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_attr_leaf_to_node(args);
if (!error) {
error = xfs_bmap_finish(&args->trans,
* in the index/blkno/rmtblkno/rmtblkcnt fields and
* in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields.
*/
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_da_split(state);
if (!error) {
error = xfs_bmap_finish(&args->trans, args->flist,
* Check to see if the tree needs to be collapsed.
*/
if (retval && (state->path.active > 1)) {
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_da_join(state);
if (!error) {
error = xfs_bmap_finish(&args->trans,
* Check to see if the tree needs to be collapsed.
*/
if (retval && (state->path.active > 1)) {
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_da_join(state);
if (!error) {
error = xfs_bmap_finish(&args->trans, args->flist,
== XFS_ATTR_LEAF_MAGIC);
if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
if (!error) {
/*
* Allocate a single extent, up to the size of the value.
*/
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno,
blkcnt,
/*
* Try to remember where we decided to put the value.
*/
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno,
args->rmtblkcnt,
/*
* Try to remember where we decided to put the value.
*/
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno,
args->rmtblkcnt,
blkcnt = args->rmtblkcnt;
done = 0;
while (!done) {
- XFS_BMAP_INIT(args->flist, args->firstblock);
+ xfs_bmap_init(args->flist, args->firstblock);
error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
1, args->firstblock, args->flist,
xfs_iext_insert(ifp, 0, 1, new);
ASSERT(cur == NULL);
ifp->if_lastex = 0;
- if (!ISNULLSTARTBLOCK(new->br_startblock)) {
+ if (!isnullstartblock(new->br_startblock)) {
XFS_IFORK_NEXT_SET(ip, whichfork, 1);
- logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+ logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
} else
logflags = 0;
/* DELTA: single new extent */
/*
* Any kind of new delayed allocation goes here.
*/
- else if (ISNULLSTARTBLOCK(new->br_startblock)) {
+ else if (isnullstartblock(new->br_startblock)) {
if (cur)
ASSERT((cur->bc_private.b.flags &
XFS_BTCUR_BPRV_WASDEL) == 0);
* in a delayed or unwritten allocation with a real one, or
* converting real back to unwritten.
*/
- if (!ISNULLSTARTBLOCK(new->br_startblock) &&
+ if (!isnullstartblock(new->br_startblock) &&
new->br_startoff + new->br_blockcount > prev.br_startoff) {
if (prev.br_state != XFS_EXT_UNWRITTEN &&
- ISNULLSTARTBLOCK(prev.br_startblock)) {
- da_old = STARTBLOCKVAL(prev.br_startblock);
+ isnullstartblock(prev.br_startblock)) {
+ da_old = startblockval(prev.br_startblock);
if (cur)
ASSERT(cur->bc_private.b.flags &
XFS_BTCUR_BPRV_WASDEL);
*/
if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
- STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+ STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
}
STATE_SET(LEFT_CONTIG,
STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
idx <
ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
- STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+ STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
}
STATE_SET(RIGHT_CONTIG,
STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
goto done;
}
temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
- STARTBLOCKVAL(PREV.br_startblock));
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ startblockval(PREV.br_startblock));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK);
*dnew = temp;
/* DELTA: The boundary between two in-core extents moved. */
goto done;
}
temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
- STARTBLOCKVAL(PREV.br_startblock) -
+ startblockval(PREV.br_startblock) -
(cur ? cur->bc_private.b.allocated : 0));
ep = xfs_iext_get_ext(ifp, idx + 1);
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK);
*dnew = temp;
/* DELTA: One in-core extent is split in two. */
goto done;
}
temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
- STARTBLOCKVAL(PREV.br_startblock));
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ startblockval(PREV.br_startblock));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK);
*dnew = temp;
/* DELTA: The boundary between two in-core extents moved. */
goto done;
}
temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
- STARTBLOCKVAL(PREV.br_startblock) -
+ startblockval(PREV.br_startblock) -
(cur ? cur->bc_private.b.allocated : 0));
ep = xfs_iext_get_ext(ifp, idx);
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK);
*dnew = temp;
/* DELTA: One in-core extent is split in two. */
}
temp = xfs_bmap_worst_indlen(ip, temp);
temp2 = xfs_bmap_worst_indlen(ip, temp2);
- diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) -
+ diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
(cur ? cur->bc_private.b.allocated : 0));
if (diff > 0 &&
xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) {
}
}
ep = xfs_iext_get_ext(ifp, idx);
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK);
XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2),
- NULLSTARTBLOCK((int)temp2));
+ nullstartblock((int)temp2));
XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
*dnew = temp + temp2;
/* DELTA: One in-core extent is split in three. */
*/
if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
- STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+ STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
}
STATE_SET(LEFT_CONTIG,
STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
idx <
ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
- STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+ STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
}
STATE_SET(RIGHT_CONTIG,
STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
ep = xfs_iext_get_ext(ifp, idx);
state = 0;
- ASSERT(ISNULLSTARTBLOCK(new->br_startblock));
+ ASSERT(isnullstartblock(new->br_startblock));
/*
* Check and set flags if this segment has a left neighbor
*/
if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
- STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+ STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
}
/*
* Check and set flags if the current (right) segment exists.
idx <
ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
xfs_bmbt_get_all(ep, &right);
- STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+ STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
}
/*
* Set contiguity flags on the left and right neighbors.
XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1,
XFS_DATA_FORK);
xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
- oldlen = STARTBLOCKVAL(left.br_startblock) +
- STARTBLOCKVAL(new->br_startblock) +
- STARTBLOCKVAL(right.br_startblock);
+ oldlen = startblockval(left.br_startblock) +
+ startblockval(new->br_startblock) +
+ startblockval(right.br_startblock);
newlen = xfs_bmap_worst_indlen(ip, temp);
xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
- NULLSTARTBLOCK((int)newlen));
+ nullstartblock((int)newlen));
XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1,
XFS_DATA_FORK);
XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK);
XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1,
XFS_DATA_FORK);
xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
- oldlen = STARTBLOCKVAL(left.br_startblock) +
- STARTBLOCKVAL(new->br_startblock);
+ oldlen = startblockval(left.br_startblock) +
+ startblockval(new->br_startblock);
newlen = xfs_bmap_worst_indlen(ip, temp);
xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
- NULLSTARTBLOCK((int)newlen));
+ nullstartblock((int)newlen));
XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1,
XFS_DATA_FORK);
ip->i_df.if_lastex = idx - 1;
*/
XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK);
temp = new->br_blockcount + right.br_blockcount;
- oldlen = STARTBLOCKVAL(new->br_startblock) +
- STARTBLOCKVAL(right.br_startblock);
+ oldlen = startblockval(new->br_startblock) +
+ startblockval(right.br_startblock);
newlen = xfs_bmap_worst_indlen(ip, temp);
xfs_bmbt_set_allf(ep, new->br_startoff,
- NULLSTARTBLOCK((int)newlen), temp, right.br_state);
+ nullstartblock((int)newlen), temp, right.br_state);
XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK);
ip->i_df.if_lastex = idx;
/* DELTA: One in-core extent grew into a hole. */
*/
if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
- STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+ STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
}
/*
* Check and set flags if this segment has a current value.
idx <
ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
xfs_bmbt_get_all(ep, &right);
- STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+ STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
}
/*
* We're inserting a real allocation between "left" and "right".
XFS_IFORK_NEXT_SET(ip, whichfork,
XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
if (cur == NULL) {
- rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+ rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
} else {
rval = XFS_ILOG_CORE;
if ((error = xfs_bmbt_lookup_eq(cur,
XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork);
ifp->if_lastex = idx - 1;
if (cur == NULL) {
- rval = XFS_ILOG_FEXT(whichfork);
+ rval = xfs_ilog_fext(whichfork);
} else {
rval = 0;
if ((error = xfs_bmbt_lookup_eq(cur,
XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork);
ifp->if_lastex = idx;
if (cur == NULL) {
- rval = XFS_ILOG_FEXT(whichfork);
+ rval = xfs_ilog_fext(whichfork);
} else {
rval = 0;
if ((error = xfs_bmbt_lookup_eq(cur,
XFS_IFORK_NEXT_SET(ip, whichfork,
XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
if (cur == NULL) {
- rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+ rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
} else {
rval = XFS_ILOG_CORE;
if ((error = xfs_bmbt_lookup_eq(cur,
* try to use it's last block as our starting point.
*/
if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF &&
- !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+ !isnullstartblock(ap->prevp->br_startblock) &&
ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount,
ap->prevp->br_startblock)) {
ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount;
* start block based on it.
*/
if (ap->prevp->br_startoff != NULLFILEOFF &&
- !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+ !isnullstartblock(ap->prevp->br_startblock) &&
(prevbno = ap->prevp->br_startblock +
ap->prevp->br_blockcount) &&
ISVALID(prevbno, ap->prevp->br_startblock)) {
* If there's a following (right) block, select a requested
* start block based on it.
*/
- if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) {
+ if (!isnullstartblock(ap->gotp->br_startblock)) {
/*
* Calculate gap to start of next block.
*/
ASSERT(ifp->if_broot == NULL);
ASSERT((ifp->if_flags & XFS_IFBROOT) == 0);
XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS);
- *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+ *logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
return 0;
}
del_endoff = del->br_startoff + del->br_blockcount;
got_endoff = got.br_startoff + got.br_blockcount;
ASSERT(got_endoff >= del_endoff);
- delay = ISNULLSTARTBLOCK(got.br_startblock);
- ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay);
+ delay = isnullstartblock(got.br_startblock);
+ ASSERT(isnullstartblock(del->br_startblock) == delay);
flags = 0;
qfield = 0;
error = 0;
}
da_old = da_new = 0;
} else {
- da_old = STARTBLOCKVAL(got.br_startblock);
+ da_old = startblockval(got.br_startblock);
da_new = 0;
nblks = 0;
do_fx = 0;
XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
flags |= XFS_ILOG_CORE;
if (!cur) {
- flags |= XFS_ILOG_FEXT(whichfork);
+ flags |= xfs_ilog_fext(whichfork);
break;
}
if ((error = xfs_btree_delete(cur, &i)))
if (delay) {
temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
da_old);
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx,
whichfork);
da_new = temp;
xfs_bmbt_set_startblock(ep, del_endblock);
XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork);
if (!cur) {
- flags |= XFS_ILOG_FEXT(whichfork);
+ flags |= xfs_ilog_fext(whichfork);
break;
}
if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock,
if (delay) {
temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
da_old);
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx,
whichfork);
da_new = temp;
}
XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork);
if (!cur) {
- flags |= XFS_ILOG_FEXT(whichfork);
+ flags |= xfs_ilog_fext(whichfork);
break;
}
if ((error = xfs_bmbt_update(cur, got.br_startoff,
}
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
} else
- flags |= XFS_ILOG_FEXT(whichfork);
+ flags |= xfs_ilog_fext(whichfork);
XFS_IFORK_NEXT_SET(ip, whichfork,
XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
} else {
ASSERT(whichfork == XFS_DATA_FORK);
temp = xfs_bmap_worst_indlen(ip, temp);
- xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
temp2 = xfs_bmap_worst_indlen(ip, temp2);
- new.br_startblock = NULLSTARTBLOCK((int)temp2);
+ new.br_startblock = nullstartblock((int)temp2);
da_new = temp + temp2;
while (da_new > da_old) {
if (temp) {
temp--;
da_new--;
xfs_bmbt_set_startblock(ep,
- NULLSTARTBLOCK((int)temp));
+ nullstartblock((int)temp));
}
if (da_new == da_old)
break;
temp2--;
da_new--;
new.br_startblock =
- NULLSTARTBLOCK((int)temp2);
+ nullstartblock((int)temp2);
}
}
}
nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
for (cnt = i = 0; i < nextents; i++) {
ep = xfs_iext_get_ext(ifp, i);
- if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) {
+ if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) {
arp->l0 = cpu_to_be64(ep->l0);
arp->l1 = cpu_to_be64(ep->l1);
arp++; cnt++;
xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs));
ASSERT(*curp == NULL);
*curp = cur;
- *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork);
+ *logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork);
return 0;
}
ip->i_d.di_nblocks = 1;
XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip,
XFS_TRANS_DQ_BCOUNT, 1L);
- flags |= XFS_ILOG_FEXT(whichfork);
+ flags |= xfs_ilog_fext(whichfork);
} else {
ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0);
xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork);
XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t);
ip->i_afp->if_flags = XFS_IFEXTENTS;
logflags = 0;
- XFS_BMAP_INIT(&flist, &firstblock);
+ xfs_bmap_init(&flist, &firstblock);
switch (ip->i_d.di_format) {
case XFS_DINODE_FMT_LOCAL:
error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist,
ASSERT(bno != NULLFSBLOCK);
ASSERT(len > 0);
ASSERT(len <= MAXEXTLEN);
- ASSERT(!ISNULLSTARTBLOCK(bno));
+ ASSERT(!isnullstartblock(bno));
agno = XFS_FSB_TO_AGNO(mp, bno);
agbno = XFS_FSB_TO_AGBNO(mp, bno);
ASSERT(agno < mp->m_sb.sb_agcount);
got.br_startoff = end;
inhole = eof || got.br_startoff > bno;
wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) &&
- ISNULLSTARTBLOCK(got.br_startblock);
+ isnullstartblock(got.br_startblock);
/*
* First, deal with the hole before the allocated space
* that we found, if any.
}
ip->i_delayed_blks += alen;
- abno = NULLSTARTBLOCK(indlen);
+ abno = nullstartblock(indlen);
} else {
/*
* If first time, allocate and fill in
aoff + alen);
#ifdef DEBUG
if (flags & XFS_BMAPI_DELAY) {
- ASSERT(ISNULLSTARTBLOCK(got.br_startblock));
- ASSERT(STARTBLOCKVAL(got.br_startblock) > 0);
+ ASSERT(isnullstartblock(got.br_startblock));
+ ASSERT(startblockval(got.br_startblock) > 0);
}
ASSERT(got.br_state == XFS_EXT_NORM ||
got.br_state == XFS_EXT_UNWRITTEN);
ASSERT((bno >= obno) || (n == 0));
ASSERT(bno < end);
mval->br_startoff = bno;
- if (ISNULLSTARTBLOCK(got.br_startblock)) {
+ if (isnullstartblock(got.br_startblock)) {
ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
mval->br_startblock = DELAYSTARTBLOCK;
} else
ASSERT(mval->br_blockcount <= len);
} else {
*mval = got;
- if (ISNULLSTARTBLOCK(mval->br_startblock)) {
+ if (isnullstartblock(mval->br_startblock)) {
ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
mval->br_startblock = DELAYSTARTBLOCK;
}
* Log everything. Do this after conversion, there's no point in
* logging the extent records if we've converted to btree format.
*/
- if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+ if ((logflags & xfs_ilog_fext(whichfork)) &&
XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
- logflags &= ~XFS_ILOG_FEXT(whichfork);
- else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+ logflags &= ~xfs_ilog_fext(whichfork);
+ else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
- logflags &= ~XFS_ILOG_FBROOT(whichfork);
+ logflags &= ~xfs_ilog_fbroot(whichfork);
/*
* Log whatever the flags say, even if error. Otherwise we might miss
* detecting a case where the data is changed, there's an error,
*fsb = NULLFSBLOCK;
return 0;
}
- ASSERT(!ISNULLSTARTBLOCK(got.br_startblock));
+ ASSERT(!isnullstartblock(got.br_startblock));
ASSERT(bno < got.br_startoff + got.br_blockcount);
*fsb = got.br_startblock + (bno - got.br_startoff);
ifp->if_lastex = lastx;
*/
ASSERT(ep != NULL);
del = got;
- wasdel = ISNULLSTARTBLOCK(del.br_startblock);
+ wasdel = isnullstartblock(del.br_startblock);
if (got.br_startoff < start) {
del.br_startoff = start;
del.br_blockcount -= start - got.br_startoff;
xfs_bmbt_get_all(xfs_iext_get_ext(ifp,
lastx - 1), &prev);
ASSERT(prev.br_state == XFS_EXT_NORM);
- ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock));
+ ASSERT(!isnullstartblock(prev.br_startblock));
ASSERT(del.br_startblock ==
prev.br_startblock + prev.br_blockcount);
if (prev.br_startoff < start) {
}
}
if (wasdel) {
- ASSERT(STARTBLOCKVAL(del.br_startblock) > 0);
+ ASSERT(startblockval(del.br_startblock) > 0);
/* Update realtime/data freespace, unreserve quota */
if (isrt) {
xfs_filblks_t rtexts;
* Log everything. Do this after conversion, there's no point in
* logging the extent records if we've converted to btree format.
*/
- if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+ if ((logflags & xfs_ilog_fext(whichfork)) &&
XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
- logflags &= ~XFS_ILOG_FEXT(whichfork);
- else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+ logflags &= ~xfs_ilog_fext(whichfork);
+ else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
- logflags &= ~XFS_ILOG_FBROOT(whichfork);
+ logflags &= ~xfs_ilog_fbroot(whichfork);
/*
* Log inode even in the error case, if the transaction
* is dirty we'll need to shut down the filesystem.
if (startblock == DELAYSTARTBLOCK)
out->bmv_block = -2;
else
- out->bmv_block = XFS_FSB_TO_DB(ip, startblock);
+ out->bmv_block = xfs_fsb_to_db(ip, startblock);
fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset);
ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) &&
if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
- bmapi_flags = XFS_BMAPI_AFLAG(whichfork) |
+ bmapi_flags = xfs_bmapi_aflag(whichfork) |
((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
/*
*/
*aeof = (off >= s.br_startoff &&
off < s.br_startoff + s.br_blockcount &&
- ISNULLSTARTBLOCK(s.br_startblock)) ||
+ isnullstartblock(s.br_startblock)) ||
off >= s.br_startoff + s.br_blockcount;
return 0;
}
/* need write cache flushing and no */
/* additional allocation alignments */
-#define XFS_BMAPI_AFLAG(w) xfs_bmapi_aflag(w)
static inline int xfs_bmapi_aflag(int w)
{
return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0);
#define DELAYSTARTBLOCK ((xfs_fsblock_t)-1LL)
#define HOLESTARTBLOCK ((xfs_fsblock_t)-2LL)
-#define XFS_BMAP_INIT(flp,fbp) xfs_bmap_init(flp,fbp)
static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp)
{
((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \
b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) |
(((xfs_dfsbno_t)l1) >> 21);
- ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+ ASSERT((b >> 32) == 0 || isnulldstartblock(b));
s->br_startblock = (xfs_fsblock_t)b;
}
#else /* !DEBUG */
b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) |
(((xfs_dfsbno_t)r->l1) >> 21);
- ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+ ASSERT((b >> 32) == 0 || isnulldstartblock(b));
return (xfs_fsblock_t)b;
#else /* !DEBUG */
return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21);
((xfs_bmbt_rec_base_t)blockcount &
(xfs_bmbt_rec_base_t)xfs_mask64lo(21));
#else /* !XFS_BIG_BLKNOS */
- if (ISNULLSTARTBLOCK(startblock)) {
+ if (isnullstartblock(startblock)) {
r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
((xfs_bmbt_rec_base_t)startoff << 9) |
(xfs_bmbt_rec_base_t)xfs_mask64lo(9);
((xfs_bmbt_rec_base_t)blockcount &
(xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
#else /* !XFS_BIG_BLKNOS */
- if (ISNULLSTARTBLOCK(startblock)) {
+ if (isnullstartblock(startblock)) {
r->l0 = cpu_to_be64(
((xfs_bmbt_rec_base_t)extent_flag << 63) |
((xfs_bmbt_rec_base_t)startoff << 9) |
r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) |
(xfs_bmbt_rec_base_t)(v << 21);
#else /* !XFS_BIG_BLKNOS */
- if (ISNULLSTARTBLOCK(v)) {
+ if (isnullstartblock(v)) {
r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) |
((xfs_bmbt_rec_base_t)v << 21) |
#define DSTARTBLOCKMASK \
(((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS)
-#define ISNULLSTARTBLOCK(x) isnullstartblock(x)
static inline int isnullstartblock(xfs_fsblock_t x)
{
return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK;
}
-#define ISNULLDSTARTBLOCK(x) isnulldstartblock(x)
static inline int isnulldstartblock(xfs_dfsbno_t x)
{
return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK;
}
-#define NULLSTARTBLOCK(k) nullstartblock(k)
static inline xfs_fsblock_t nullstartblock(int k)
{
ASSERT(k < (1 << STARTBLOCKVALBITS));
return STARTBLOCKMASK | (k);
}
-#define STARTBLOCKVAL(x) startblockval(x)
static inline xfs_filblks_t startblockval(xfs_fsblock_t x)
{
return (xfs_filblks_t)((x) & ~STARTBLOCKMASK);
union xfs_btree_ptr *ptr)
{
if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
- return be64_to_cpu(ptr->l) == NULLFSBLOCK;
+ return be64_to_cpu(ptr->l) == NULLDFSBNO;
else
return be32_to_cpu(ptr->s) == NULLAGBLOCK;
}
union xfs_btree_ptr *ptr)
{
if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
- ptr->l = cpu_to_be64(NULLFSBLOCK);
+ ptr->l = cpu_to_be64(NULLDFSBNO);
else
ptr->s = cpu_to_be32(NULLAGBLOCK);
}
new->bb_numrecs = cpu_to_be16(numrecs);
if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
- new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK);
- new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK);
+ new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO);
+ new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO);
} else {
new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK);
new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK);
ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp,
XFS_BUF_ADDR(bp)));
else {
- ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp,
+ ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp,
XFS_BUF_ADDR(bp)));
}
}
union xfs_btree_ptr *ptr)
{
if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
- ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK);
+ ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO);
return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l));
} else {
xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs));
*logflags |=
- XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork);
+ XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork);
*stat = 1;
XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
return 0;
cur->bc_bufs[level - 1] = NULL;
be16_add_cpu(&block->bb_level, -1);
xfs_trans_log_inode(cur->bc_tp, ip,
- XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork));
+ XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork));
cur->bc_nlevels--;
out0:
XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
nmap = 1;
ASSERT(args->firstblock != NULL);
if ((error = xfs_bmapi(tp, dp, bno, count,
- XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
+ xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
XFS_BMAPI_CONTIG,
args->firstblock, args->total, &map, &nmap,
args->flist, NULL))) {
nmap = MIN(XFS_BMAP_MAX_NMAP, count);
c = (int)(bno + count - b);
if ((error = xfs_bmapi(tp, dp, b, c,
- XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|
+ xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
XFS_BMAPI_METADATA,
args->firstblock, args->total,
&mapp[mapi], &nmap, args->flist,
* the last block to the place we want to kill.
*/
if ((error = xfs_bunmapi(tp, dp, dead_blkno, count,
- XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA,
+ xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
0, args->firstblock, args->flist, NULL,
&done)) == ENOSPC) {
if (w != XFS_DATA_FORK)
if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno,
nfsb,
XFS_BMAPI_METADATA |
- XFS_BMAPI_AFLAG(whichfork),
+ xfs_bmapi_aflag(whichfork),
NULL, 0, mapp, &nmap, NULL, NULL)))
goto exit0;
}
int ioffset = i << args.mp->m_sb.sb_inodelog;
uint isize = sizeof(struct xfs_dinode);
- free = XFS_MAKE_IPTR(args.mp, fbuf, i);
+ free = xfs_make_iptr(args.mp, fbuf, i);
free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
free->di_version = version;
free->di_gen = cpu_to_be32(gen);
}
}
}
- offset = XFS_IALLOC_FIND_FREE(&rec.ir_free);
+ offset = xfs_ialloc_find_free(&rec.ir_free);
ASSERT(offset >= 0);
ASSERT(offset < XFS_INODES_PER_CHUNK);
ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) %
offset = XFS_INO_TO_OFFSET(mp, ino);
ASSERT(offset < mp->m_sb.sb_inopblock);
- cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno);
+ cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
/*
* Make an inode pointer out of the buffer/offset.
*/
-#define XFS_MAKE_IPTR(mp,b,o) xfs_make_iptr(mp,b,o)
static inline struct xfs_dinode *
xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o)
{
/*
* Find a free (set) bit in the inode bitmask.
*/
-#define XFS_IALLOC_FIND_FREE(fp) xfs_ialloc_find_free(fp)
static inline int xfs_ialloc_find_free(xfs_inofree_t *fp)
{
return xfs_lowbit64(*fp);
#define XFS_INODES_PER_CHUNK_LOG (XFS_NBBYLOG + 3)
#define XFS_INOBT_ALL_FREE ((xfs_inofree_t)-1)
-#define XFS_INOBT_MASKN(i,n) xfs_inobt_maskn(i,n)
static inline xfs_inofree_t xfs_inobt_maskn(int i, int n)
{
return (((n) >= XFS_INODES_PER_CHUNK ? \
case XFS_DINODE_FMT_LOCAL:
atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip);
size = be16_to_cpu(atp->hdr.totsize);
+
+ if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) {
+ xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+ "corrupt inode %Lu "
+ "(bad attr fork size %Ld).",
+ (unsigned long long) ip->i_ino,
+ (long long) size);
+ XFS_CORRUPTION_ERROR("xfs_iformat(8)",
+ XFS_ERRLEVEL_LOW,
+ ip->i_mount, dip);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size);
break;
case XFS_DINODE_FMT_EXTENTS:
* in this file with garbage in them once recovery
* runs.
*/
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
error = xfs_bunmapi(ntp, ip,
first_unmap_block, unmap_len,
- XFS_BMAPI_AFLAG(fork) |
+ xfs_bmapi_aflag(fork) |
(sync ? 0 : XFS_BMAPI_ASYNC),
XFS_ITRUNC_MAX_EXTENTS,
&first_block, &free_list,
for (i = 0; i < nrecs; i++) {
xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i);
start_block = xfs_bmbt_get_startblock(ep);
- if (ISNULLSTARTBLOCK(start_block)) {
+ if (isnullstartblock(start_block)) {
/*
* It's a delayed allocation extent, so skip it.
*/
#define XFS_ILI_IOLOCKED_ANY (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED)
-
-#define XFS_ILOG_FBROOT(w) xfs_ilog_fbroot(w)
static inline int xfs_ilog_fbroot(int w)
{
return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
}
-#define XFS_ILOG_FEXT(w) xfs_ilog_fext(w)
static inline int xfs_ilog_fext(int w)
{
return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT);
}
-#define XFS_ILOG_FDATA(w) xfs_ilog_fdata(w)
static inline int xfs_ilog_fdata(int w)
{
return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA);
iomapp->iomap_bn = IOMAP_DADDR_NULL;
iomapp->iomap_flags |= IOMAP_DELAY;
} else {
- iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block);
+ iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block);
if (ISUNWRITTEN(imap))
iomapp->iomap_flags |= IOMAP_UNWRITTEN;
}
xfs_iunlock(ip, lockmode);
lockmode = 0;
- if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) {
+ if (nimaps && !isnullstartblock(imap.br_startblock)) {
xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip,
offset, count, iomapp, &imap, flags);
break;
/*
* Issue the xfs_bmapi() call to allocate the blocks
*/
- XFS_BMAP_INIT(&free_list, &firstfsb);
+ xfs_bmap_init(&free_list, &firstfsb);
nimaps = 1;
error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
&firstfsb, 0, &imap, &nimaps, &free_list, NULL);
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_ihold(tp, ip);
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
/*
* it is possible that the extents have changed since
/*
* Modify the unwritten extent state of the buffer.
*/
- XFS_BMAP_INIT(&free_list, &firstfsb);
+ xfs_bmap_init(&free_list, &firstfsb);
nimaps = 1;
error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
(chunkidx = agino - gino + 1) <
XFS_INODES_PER_CHUNK &&
/* there are some left allocated */
- XFS_INOBT_MASKN(chunkidx,
+ xfs_inobt_maskn(chunkidx,
XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) {
/*
* Grab the chunk record. Mark all the
if (XFS_INOBT_MASK(i) & ~gfree)
gcnt++;
}
- gfree |= XFS_INOBT_MASKN(0, chunkidx);
+ gfree |= xfs_inobt_maskn(0, chunkidx);
irbp->ir_startino = gino;
irbp->ir_freecount = gcnt;
irbp->ir_free = gfree;
chunkidx < XFS_INODES_PER_CHUNK;
chunkidx += nicluster,
agbno += nbcluster) {
- if (XFS_INOBT_MASKN(chunkidx,
+ if (xfs_inobt_maskn(chunkidx,
nicluster) & ~gfree)
xfs_btree_reada_bufs(mp, agno,
agbno, nbcluster);
#include "xfs_fsops.h"
#include "xfs_utils.h"
-STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t);
STATIC int xfs_uuid_mount(xfs_mount_t *);
STATIC void xfs_unmountfs_wait(xfs_mount_t *);
* Update alignment values based on mount options and sb values
*/
STATIC int
-xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
+xfs_update_alignment(xfs_mount_t *mp)
{
xfs_sb_t *sbp = &(mp->m_sb);
if (xfs_sb_version_hasdalign(sbp)) {
if (sbp->sb_unit != mp->m_dalign) {
sbp->sb_unit = mp->m_dalign;
- *update_flags |= XFS_SB_UNIT;
+ mp->m_update_flags |= XFS_SB_UNIT;
}
if (sbp->sb_width != mp->m_swidth) {
sbp->sb_width = mp->m_swidth;
- *update_flags |= XFS_SB_WIDTH;
+ mp->m_update_flags |= XFS_SB_WIDTH;
}
}
} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
xfs_sb_t *sbp = &(mp->m_sb);
xfs_inode_t *rip;
__uint64_t resblks;
- __int64_t update_flags = 0LL;
uint quotamount, quotaflags;
int uuid_mounted = 0;
int error = 0;
"XFS: correcting sb_features alignment problem");
sbp->sb_features2 |= sbp->sb_bad_features2;
sbp->sb_bad_features2 = sbp->sb_features2;
- update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+ mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
/*
* Re-check for ATTR2 in case it was found in bad_features2
if (xfs_sb_version_hasattr2(&mp->m_sb) &&
(mp->m_flags & XFS_MOUNT_NOATTR2)) {
xfs_sb_version_removeattr2(&mp->m_sb);
- update_flags |= XFS_SB_FEATURES2;
+ mp->m_update_flags |= XFS_SB_FEATURES2;
/* update sb_versionnum for the clearing of the morebits */
if (!sbp->sb_features2)
- update_flags |= XFS_SB_VERSIONNUM;
+ mp->m_update_flags |= XFS_SB_VERSIONNUM;
}
/*
* allocator alignment is within an ag, therefore ag has
* to be aligned at stripe boundary.
*/
- error = xfs_update_alignment(mp, &update_flags);
+ error = xfs_update_alignment(mp);
if (error)
goto error1;
}
/*
- * If fs is not mounted readonly, then update the superblock changes.
+ * If this is a read-only mount defer the superblock updates until
+ * the next remount into writeable mode. Otherwise we would never
+ * perform the update e.g. for the root filesystem.
*/
- if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
- error = xfs_mount_log_sb(mp, update_flags);
+ if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ error = xfs_mount_log_sb(mp, mp->m_update_flags);
if (error) {
cmn_err(CE_WARN, "XFS: failed to write sb changes");
goto error4;
* be altered by the mount options, as well as any potential sb_features2
* fixup. Only the first superblock is updated.
*/
-STATIC int
+int
xfs_mount_log_sb(
xfs_mount_t *mp,
__int64_t fields)
#ifndef __KERNEL__
-#define XFS_DADDR_TO_AGNO(mp,d) \
+#define xfs_daddr_to_agno(mp,d) \
((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks))
-#define XFS_DADDR_TO_AGBNO(mp,d) \
+#define xfs_daddr_to_agbno(mp,d) \
((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks))
#else /* __KERNEL__ */
spinlock_t m_sync_lock; /* work item list lock */
int m_sync_seq; /* sync thread generation no. */
wait_queue_head_t m_wait_single_sync_task;
+ __int64_t m_update_flags; /* sb flags we need to update
+ on the next remount,rw */
} xfs_mount_t;
/*
*/
#define XFS_MFSI_QUIET 0x40 /* Be silent if mount errors found */
-#define XFS_DADDR_TO_AGNO(mp,d) xfs_daddr_to_agno(mp,d)
static inline xfs_agnumber_t
xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d)
{
return (xfs_agnumber_t) ld;
}
-#define XFS_DADDR_TO_AGBNO(mp,d) xfs_daddr_to_agbno(mp,d)
static inline xfs_agblock_t
xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d)
{
int64_t, int);
extern int xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *,
uint, int);
+extern int xfs_mount_log_sb(xfs_mount_t *, __int64_t);
extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int);
extern int xfs_readsb(xfs_mount_t *, int);
extern void xfs_freesb(xfs_mount_t *);
xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip,
inodes, &num_inodes);
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME);
cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len);
if ((error = xfs_trans_iget(mp, tp, ino, 0,
XFS_ILOCK_EXCL, &ip)))
goto error_cancel;
- XFS_BMAP_INIT(&flist, &firstblock);
+ xfs_bmap_init(&flist, &firstblock);
/*
* Allocate blocks to the bitmap file.
*/
* file is a real time file or not, because the bmap code
* does.
*/
-#define XFS_FSB_TO_DB(ip,fsb) xfs_fsb_to_db(ip,fsb)
static inline xfs_daddr_t
xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb)
{
#define XFS_HDR_BLOCK(mp,d) ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d))
#define XFS_DADDR_TO_FSB(mp,d) XFS_AGB_TO_FSB(mp, \
- XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d))
+ xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d))
#define XFS_FSB_TO_DADDR(mp,fsbno) XFS_AGB_TO_DADDR(mp, \
XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno))
* Find the block(s) so we can inval and unmap them.
*/
done = 0;
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
nmaps = ARRAY_SIZE(mval);
if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
/*
* Free the inode.
*/
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
error = xfs_ifree(tp, ip, &free_list);
if (error) {
/*
xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
unlock_dp_on_error = B_TRUE;
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
ASSERT(ip == NULL);
}
}
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
error = xfs_dir_removename(tp, dp, name, ip->i_ino,
&first_block, &free_list, resblks);
if (error) {
if (error)
goto error_return;
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino,
&first_block, &free_list, resblks);
xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = B_FALSE;
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino,
&first_block, &free_list, resblks ?
* Initialize the bmap freelist prior to calling either
* bmapi or the directory create code.
*/
- XFS_BMAP_INIT(&free_list, &first_block);
+ xfs_bmap_init(&free_list, &first_block);
/*
* Allocate an inode for the symlink.
/*
* Issue the xfs_bmapi() call to allocate the blocks
*/
- XFS_BMAP_INIT(&free_list, &firstfsb);
+ xfs_bmap_init(&free_list, &firstfsb);
error = xfs_bmapi(tp, ip, startoffset_fsb,
allocatesize_fsb, bmapi_flag,
&firstfsb, 0, imapp, &nimaps,
XFS_BUF_UNDONE(bp);
XFS_BUF_UNWRITE(bp);
XFS_BUF_READ(bp);
- XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock));
+ XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock));
xfsbdstrat(mp, bp);
error = xfs_iowait(bp);
if (error) {
/*
* issue the bunmapi() call to free the blocks
*/
- XFS_BMAP_INIT(&free_list, &firstfsb);
+ xfs_bmap_init(&free_list, &firstfsb);
error = xfs_bunmapi(tp, ip, startoffset_fsb,
endoffset_fsb - startoffset_fsb,
0, 2, &firstfsb, &free_list, NULL, &done);
*
* Undefined if no bit exists, so code should check against 0 first.
*/
-static inline unsigned long __ffs(unsigned long word)
+static __always_inline unsigned long __ffs(unsigned long word)
{
int num = 0;
*
* Undefined if no set bit exists, so code should check against 0 first.
*/
-static inline unsigned long __fls(unsigned long word)
+static __always_inline unsigned long __fls(unsigned long word)
{
int num = BITS_PER_LONG - 1;
* Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
*/
-static inline int fls(int x)
+static __always_inline int fls(int x)
{
int r = 32;
* at position 64.
*/
#if BITS_PER_LONG == 32
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
{
__u32 h = x >> 32;
if (h)
return fls(x);
}
#elif BITS_PER_LONG == 64
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
{
if (x == 0)
return 0;
+++ /dev/null
-include include/asm-generic/Kbuild.asm
-header-y += cachectl.h
+++ /dev/null
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
- struct switch_stack *sw;
-
-/* changed the size calculations - should hopefully work better. lbt */
- dump->magic = CMAGIC;
- dump->start_code = 0;
- dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long) (current->mm->brk +
- (PAGE_SIZE-1))) >> PAGE_SHIFT;
- dump->u_dsize -= dump->u_tsize;
- dump->u_ssize = 0;
-
- if (dump->start_stack < TASK_SIZE)
- dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
-
- dump->u_ar0 = offsetof(struct user, regs);
- sw = ((struct switch_stack *)regs) - 1;
- dump->regs.d1 = regs->d1;
- dump->regs.d2 = regs->d2;
- dump->regs.d3 = regs->d3;
- dump->regs.d4 = regs->d4;
- dump->regs.d5 = regs->d5;
- dump->regs.d6 = sw->d6;
- dump->regs.d7 = sw->d7;
- dump->regs.a0 = regs->a0;
- dump->regs.a1 = regs->a1;
- dump->regs.a2 = regs->a2;
- dump->regs.a3 = sw->a3;
- dump->regs.a4 = sw->a4;
- dump->regs.a5 = sw->a5;
- dump->regs.a6 = sw->a6;
- dump->regs.d0 = regs->d0;
- dump->regs.orig_d0 = regs->orig_d0;
- dump->regs.stkadj = regs->stkadj;
- dump->regs.sr = regs->sr;
- dump->regs.pc = regs->pc;
- dump->regs.fmtvec = (regs->format << 12) | regs->vector;
- /* dump floating point stuff */
- dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
+++ /dev/null
-#ifndef __M68K_A_OUT_H__
-#define __M68K_A_OUT_H__
-
-struct exec
-{
- unsigned long a_info; /* Use macros N_MAGIC, etc for access */
- unsigned a_text; /* length of text, in bytes */
- unsigned a_data; /* length of data, in bytes */
- unsigned a_bss; /* length of uninitialized data area for file, in bytes */
- unsigned a_syms; /* length of symbol table data in file, in bytes */
- unsigned a_entry; /* start address */
- unsigned a_trsize; /* length of relocation info for text, in bytes */
- unsigned a_drsize; /* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a) ((a).a_trsize)
-#define N_DRSIZE(a) ((a).a_drsize)
-#define N_SYMSIZE(a) ((a).a_syms)
-
-#endif /* __M68K_A_OUT_H__ */
+++ /dev/null
-/*
- * ADB through the IOP
- * Written by Joshua M. Thompson
- */
-
-/* IOP number and channel number for ADB */
-
-#define ADB_IOP IOP_NUM_ISM
-#define ADB_CHAN 2
-
-/* From the A/UX headers...maybe important, maybe not */
-
-#define ADB_IOP_LISTEN 0x01
-#define ADB_IOP_TALK 0x02
-#define ADB_IOP_EXISTS 0x04
-#define ADB_IOP_FLUSH 0x08
-#define ADB_IOP_RESET 0x10
-#define ADB_IOP_INT 0x20
-#define ADB_IOP_POLL 0x40
-#define ADB_IOP_UNINT 0x80
-
-#define AIF_RESET 0x00
-#define AIF_FLUSH 0x01
-#define AIF_LISTEN 0x08
-#define AIF_TALK 0x0C
-
-/* Flag bits in struct adb_iopmsg */
-
-#define ADB_IOP_EXPLICIT 0x80 /* nonzero if explicit command */
-#define ADB_IOP_AUTOPOLL 0x40 /* auto/SRQ polling enabled */
-#define ADB_IOP_SRQ 0x04 /* SRQ detected */
-#define ADB_IOP_TIMEOUT 0x02 /* nonzero if timeout */
-
-#ifndef __ASSEMBLY__
-
-struct adb_iopmsg {
- __u8 flags; /* ADB flags */
- __u8 count; /* no. of data bytes */
- __u8 cmd; /* ADB command */
- __u8 data[8]; /* ADB data */
- __u8 spare[21]; /* spare */
-};
-
-#endif /* __ASSEMBLY__ */
+++ /dev/null
-/*
-** asm-m68k/amigahw.h -- This header defines some macros and pointers for
-** the various Amiga custom hardware registers.
-** The naming conventions used here conform to those
-** used in the Amiga Hardware Reference Manual, 3rd Edition
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 9/24/92 by Greg Harp
-*/
-
-#ifndef _M68K_AMIGAHW_H
-#define _M68K_AMIGAHW_H
-
-#include <linux/ioport.h>
-
- /*
- * Different Amiga models
- */
-
-#define AMI_UNKNOWN (0)
-#define AMI_500 (1)
-#define AMI_500PLUS (2)
-#define AMI_600 (3)
-#define AMI_1000 (4)
-#define AMI_1200 (5)
-#define AMI_2000 (6)
-#define AMI_2500 (7)
-#define AMI_3000 (8)
-#define AMI_3000T (9)
-#define AMI_3000PLUS (10)
-#define AMI_4000 (11)
-#define AMI_4000T (12)
-#define AMI_CDTV (13)
-#define AMI_CD32 (14)
-#define AMI_DRACO (15)
-
-
- /*
- * Chipsets
- */
-
-extern unsigned long amiga_chipset;
-
-#define CS_STONEAGE (0)
-#define CS_OCS (1)
-#define CS_ECS (2)
-#define CS_AGA (3)
-
-
- /*
- * Miscellaneous
- */
-
-extern unsigned long amiga_eclock; /* 700 kHz E Peripheral Clock */
-extern unsigned long amiga_colorclock; /* 3.5 MHz Color Clock */
-extern unsigned long amiga_chip_size; /* Chip RAM Size (bytes) */
-extern unsigned char amiga_vblank; /* VBLANK Frequency */
-
-
-#define AMIGAHW_DECLARE(name) unsigned name : 1
-#define AMIGAHW_SET(name) (amiga_hw_present.name = 1)
-#define AMIGAHW_PRESENT(name) (amiga_hw_present.name)
-
-struct amiga_hw_present {
- /* video hardware */
- AMIGAHW_DECLARE(AMI_VIDEO); /* Amiga Video */
- AMIGAHW_DECLARE(AMI_BLITTER); /* Amiga Blitter */
- AMIGAHW_DECLARE(AMBER_FF); /* Amber Flicker Fixer */
- /* sound hardware */
- AMIGAHW_DECLARE(AMI_AUDIO); /* Amiga Audio */
- /* disk storage interfaces */
- AMIGAHW_DECLARE(AMI_FLOPPY); /* Amiga Floppy */
- AMIGAHW_DECLARE(A3000_SCSI); /* SCSI (wd33c93, A3000 alike) */
- AMIGAHW_DECLARE(A4000_SCSI); /* SCSI (ncr53c710, A4000T alike) */
- AMIGAHW_DECLARE(A1200_IDE); /* IDE (A1200 alike) */
- AMIGAHW_DECLARE(A4000_IDE); /* IDE (A4000 alike) */
- AMIGAHW_DECLARE(CD_ROM); /* CD ROM drive */
- /* other I/O hardware */
- AMIGAHW_DECLARE(AMI_KEYBOARD); /* Amiga Keyboard */
- AMIGAHW_DECLARE(AMI_MOUSE); /* Amiga Mouse */
- AMIGAHW_DECLARE(AMI_SERIAL); /* Amiga Serial */
- AMIGAHW_DECLARE(AMI_PARALLEL); /* Amiga Parallel */
- /* real time clocks */
- AMIGAHW_DECLARE(A2000_CLK); /* Hardware Clock (A2000 alike) */
- AMIGAHW_DECLARE(A3000_CLK); /* Hardware Clock (A3000 alike) */
- /* supporting hardware */
- AMIGAHW_DECLARE(CHIP_RAM); /* Chip RAM */
- AMIGAHW_DECLARE(PAULA); /* Paula (8364) */
- AMIGAHW_DECLARE(DENISE); /* Denise (8362) */
- AMIGAHW_DECLARE(DENISE_HR); /* Denise (8373) */
- AMIGAHW_DECLARE(LISA); /* Lisa (8375) */
- AMIGAHW_DECLARE(AGNUS_PAL); /* Normal/Fat PAL Agnus (8367/8371) */
- AMIGAHW_DECLARE(AGNUS_NTSC); /* Normal/Fat NTSC Agnus (8361/8370) */
- AMIGAHW_DECLARE(AGNUS_HR_PAL); /* Fat Hires PAL Agnus (8372) */
- AMIGAHW_DECLARE(AGNUS_HR_NTSC); /* Fat Hires NTSC Agnus (8372) */
- AMIGAHW_DECLARE(ALICE_PAL); /* PAL Alice (8374) */
- AMIGAHW_DECLARE(ALICE_NTSC); /* NTSC Alice (8374) */
- AMIGAHW_DECLARE(MAGIC_REKICK); /* A3000 Magic Hard Rekick */
- AMIGAHW_DECLARE(PCMCIA); /* PCMCIA Slot */
- AMIGAHW_DECLARE(GG2_ISA); /* GG2 Zorro2ISA Bridge */
- AMIGAHW_DECLARE(ZORRO); /* Zorro AutoConfig */
- AMIGAHW_DECLARE(ZORRO3); /* Zorro III */
-};
-
-extern struct amiga_hw_present amiga_hw_present;
-
-struct CUSTOM {
- unsigned short bltddat;
- unsigned short dmaconr;
- unsigned short vposr;
- unsigned short vhposr;
- unsigned short dskdatr;
- unsigned short joy0dat;
- unsigned short joy1dat;
- unsigned short clxdat;
- unsigned short adkconr;
- unsigned short pot0dat;
- unsigned short pot1dat;
- unsigned short potgor;
- unsigned short serdatr;
- unsigned short dskbytr;
- unsigned short intenar;
- unsigned short intreqr;
- unsigned char *dskptr;
- unsigned short dsklen;
- unsigned short dskdat;
- unsigned short refptr;
- unsigned short vposw;
- unsigned short vhposw;
- unsigned short copcon;
- unsigned short serdat;
- unsigned short serper;
- unsigned short potgo;
- unsigned short joytest;
- unsigned short strequ;
- unsigned short strvbl;
- unsigned short strhor;
- unsigned short strlong;
- unsigned short bltcon0;
- unsigned short bltcon1;
- unsigned short bltafwm;
- unsigned short bltalwm;
- unsigned char *bltcpt;
- unsigned char *bltbpt;
- unsigned char *bltapt;
- unsigned char *bltdpt;
- unsigned short bltsize;
- unsigned char pad2d;
- unsigned char bltcon0l;
- unsigned short bltsizv;
- unsigned short bltsizh;
- unsigned short bltcmod;
- unsigned short bltbmod;
- unsigned short bltamod;
- unsigned short bltdmod;
- unsigned short spare2[4];
- unsigned short bltcdat;
- unsigned short bltbdat;
- unsigned short bltadat;
- unsigned short spare3[3];
- unsigned short deniseid;
- unsigned short dsksync;
- unsigned short *cop1lc;
- unsigned short *cop2lc;
- unsigned short copjmp1;
- unsigned short copjmp2;
- unsigned short copins;
- unsigned short diwstrt;
- unsigned short diwstop;
- unsigned short ddfstrt;
- unsigned short ddfstop;
- unsigned short dmacon;
- unsigned short clxcon;
- unsigned short intena;
- unsigned short intreq;
- unsigned short adkcon;
- struct {
- unsigned short *audlc;
- unsigned short audlen;
- unsigned short audper;
- unsigned short audvol;
- unsigned short auddat;
- unsigned short audspare[2];
- } aud[4];
- unsigned char *bplpt[8];
- unsigned short bplcon0;
- unsigned short bplcon1;
- unsigned short bplcon2;
- unsigned short bplcon3;
- unsigned short bpl1mod;
- unsigned short bpl2mod;
- unsigned short bplcon4;
- unsigned short clxcon2;
- unsigned short bpldat[8];
- unsigned char *sprpt[8];
- struct {
- unsigned short pos;
- unsigned short ctl;
- unsigned short dataa;
- unsigned short datab;
- } spr[8];
- unsigned short color[32];
- unsigned short htotal;
- unsigned short hsstop;
- unsigned short hbstrt;
- unsigned short hbstop;
- unsigned short vtotal;
- unsigned short vsstop;
- unsigned short vbstrt;
- unsigned short vbstop;
- unsigned short sprhstrt;
- unsigned short sprhstop;
- unsigned short bplhstrt;
- unsigned short bplhstop;
- unsigned short hhposw;
- unsigned short hhposr;
- unsigned short beamcon0;
- unsigned short hsstrt;
- unsigned short vsstrt;
- unsigned short hcenter;
- unsigned short diwhigh;
- unsigned short spare4[11];
- unsigned short fmode;
-};
-
-/*
- * DMA register bits
- */
-#define DMAF_SETCLR (0x8000)
-#define DMAF_AUD0 (0x0001)
-#define DMAF_AUD1 (0x0002)
-#define DMAF_AUD2 (0x0004)
-#define DMAF_AUD3 (0x0008)
-#define DMAF_DISK (0x0010)
-#define DMAF_SPRITE (0x0020)
-#define DMAF_BLITTER (0x0040)
-#define DMAF_COPPER (0x0080)
-#define DMAF_RASTER (0x0100)
-#define DMAF_MASTER (0x0200)
-#define DMAF_BLITHOG (0x0400)
-#define DMAF_BLTNZERO (0x2000)
-#define DMAF_BLTDONE (0x4000)
-#define DMAF_ALL (0x01FF)
-
-struct CIA {
- unsigned char pra; char pad0[0xff];
- unsigned char prb; char pad1[0xff];
- unsigned char ddra; char pad2[0xff];
- unsigned char ddrb; char pad3[0xff];
- unsigned char talo; char pad4[0xff];
- unsigned char tahi; char pad5[0xff];
- unsigned char tblo; char pad6[0xff];
- unsigned char tbhi; char pad7[0xff];
- unsigned char todlo; char pad8[0xff];
- unsigned char todmid; char pad9[0xff];
- unsigned char todhi; char pada[0x1ff];
- unsigned char sdr; char padb[0xff];
- unsigned char icr; char padc[0xff];
- unsigned char cra; char padd[0xff];
- unsigned char crb; char pade[0xff];
-};
-
-#define zTwoBase (0x80000000)
-#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase)
-#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase)
-
-#define CUSTOM_PHYSADDR (0xdff000)
-#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR)))
-
-#define CIAA_PHYSADDR (0xbfe001)
-#define CIAB_PHYSADDR (0xbfd000)
-#define ciaa ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR)))
-#define ciab ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR)))
-
-#define CHIP_PHYSADDR (0x000000)
-
-void amiga_chip_init (void);
-void *amiga_chip_alloc(unsigned long size, const char *name);
-void *amiga_chip_alloc_res(unsigned long size, struct resource *res);
-void amiga_chip_free(void *ptr);
-unsigned long amiga_chip_avail( void ); /*MILAN*/
-extern volatile unsigned short amiga_audio_min_period;
-
-static inline void amifb_video_off(void)
-{
- if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) {
- /* program Denise/Lisa for a higher maximum play rate */
- amiga_custom.htotal = 113; /* 31 kHz */
- amiga_custom.vtotal = 223; /* 70 Hz */
- amiga_custom.beamcon0 = 0x4390; /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */
- /* suspend the monitor */
- amiga_custom.hsstrt = amiga_custom.hsstop = 116;
- amiga_custom.vsstrt = amiga_custom.vsstop = 226;
- amiga_audio_min_period = 57;
- }
-}
-
-struct tod3000 {
- unsigned int :28, second2:4; /* lower digit */
- unsigned int :28, second1:4; /* upper digit */
- unsigned int :28, minute2:4; /* lower digit */
- unsigned int :28, minute1:4; /* upper digit */
- unsigned int :28, hour2:4; /* lower digit */
- unsigned int :28, hour1:4; /* upper digit */
- unsigned int :28, weekday:4;
- unsigned int :28, day2:4; /* lower digit */
- unsigned int :28, day1:4; /* upper digit */
- unsigned int :28, month2:4; /* lower digit */
- unsigned int :28, month1:4; /* upper digit */
- unsigned int :28, year2:4; /* lower digit */
- unsigned int :28, year1:4; /* upper digit */
- unsigned int :28, cntrl1:4; /* control-byte 1 */
- unsigned int :28, cntrl2:4; /* control-byte 2 */
- unsigned int :28, cntrl3:4; /* control-byte 3 */
-};
-#define TOD3000_CNTRL1_HOLD 0
-#define TOD3000_CNTRL1_FREE 9
-#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000)))
-
-struct tod2000 {
- unsigned int :28, second2:4; /* lower digit */
- unsigned int :28, second1:4; /* upper digit */
- unsigned int :28, minute2:4; /* lower digit */
- unsigned int :28, minute1:4; /* upper digit */
- unsigned int :28, hour2:4; /* lower digit */
- unsigned int :28, hour1:4; /* upper digit */
- unsigned int :28, day2:4; /* lower digit */
- unsigned int :28, day1:4; /* upper digit */
- unsigned int :28, month2:4; /* lower digit */
- unsigned int :28, month1:4; /* upper digit */
- unsigned int :28, year2:4; /* lower digit */
- unsigned int :28, year1:4; /* upper digit */
- unsigned int :28, weekday:4;
- unsigned int :28, cntrl1:4; /* control-byte 1 */
- unsigned int :28, cntrl2:4; /* control-byte 2 */
- unsigned int :28, cntrl3:4; /* control-byte 3 */
-};
-
-#define TOD2000_CNTRL1_HOLD (1<<0)
-#define TOD2000_CNTRL1_BUSY (1<<1)
-#define TOD2000_CNTRL3_24HMODE (1<<2)
-#define TOD2000_HOUR1_PM (1<<2)
-#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000)))
-
-#endif /* _M68K_AMIGAHW_H */
+++ /dev/null
-/*
-** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 10/2/92 by Greg Harp
-*/
-
-#ifndef _ASMm68k_AMIGAINTS_H_
-#define _ASMm68k_AMIGAINTS_H_
-
-#include <asm/irq.h>
-
-/*
-** Amiga Interrupt sources.
-**
-*/
-
-#define AUTO_IRQS (8)
-#define AMI_STD_IRQS (14)
-#define CIA_IRQS (5)
-#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
-
-/* builtin serial port interrupts */
-#define IRQ_AMIGA_TBE (IRQ_USER+0)
-#define IRQ_AMIGA_RBF (IRQ_USER+11)
-
-/* floppy disk interrupts */
-#define IRQ_AMIGA_DSKBLK (IRQ_USER+1)
-#define IRQ_AMIGA_DSKSYN (IRQ_USER+12)
-
-/* software interrupts */
-#define IRQ_AMIGA_SOFT (IRQ_USER+2)
-
-/* interrupts from external hardware */
-#define IRQ_AMIGA_PORTS IRQ_AUTO_2
-#define IRQ_AMIGA_EXTER IRQ_AUTO_6
-
-/* copper interrupt */
-#define IRQ_AMIGA_COPPER (IRQ_USER+4)
-
-/* vertical blanking interrupt */
-#define IRQ_AMIGA_VERTB (IRQ_USER+5)
-
-/* Blitter done interrupt */
-#define IRQ_AMIGA_BLIT (IRQ_USER+6)
-
-/* Audio interrupts */
-#define IRQ_AMIGA_AUD0 (IRQ_USER+7)
-#define IRQ_AMIGA_AUD1 (IRQ_USER+8)
-#define IRQ_AMIGA_AUD2 (IRQ_USER+9)
-#define IRQ_AMIGA_AUD3 (IRQ_USER+10)
-
-/* CIA interrupt sources */
-#define IRQ_AMIGA_CIAA (IRQ_USER+14)
-#define IRQ_AMIGA_CIAA_TA (IRQ_USER+14)
-#define IRQ_AMIGA_CIAA_TB (IRQ_USER+15)
-#define IRQ_AMIGA_CIAA_ALRM (IRQ_USER+16)
-#define IRQ_AMIGA_CIAA_SP (IRQ_USER+17)
-#define IRQ_AMIGA_CIAA_FLG (IRQ_USER+18)
-#define IRQ_AMIGA_CIAB (IRQ_USER+19)
-#define IRQ_AMIGA_CIAB_TA (IRQ_USER+19)
-#define IRQ_AMIGA_CIAB_TB (IRQ_USER+20)
-#define IRQ_AMIGA_CIAB_ALRM (IRQ_USER+21)
-#define IRQ_AMIGA_CIAB_SP (IRQ_USER+22)
-#define IRQ_AMIGA_CIAB_FLG (IRQ_USER+23)
-
-
-/* INTREQR masks */
-#define IF_SETCLR 0x8000 /* set/clr bit */
-#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */
-#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */
-#define IF_DSKSYN 0x1000 /* disk sync interrupt */
-#define IF_RBF 0x0800 /* serial receive buffer full interrupt */
-#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */
-#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */
-#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */
-#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */
-#define IF_BLIT 0x0040 /* blitter done interrupt */
-#define IF_VERTB 0x0020 /* vertical blanking interrupt */
-#define IF_COPER 0x0010 /* copper interrupt */
-#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */
-#define IF_SOFT 0x0004 /* software initiated interrupt */
-#define IF_DSKBLK 0x0002 /* diskblock DMA finished */
-#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */
-
-/* CIA interrupt control register bits */
-
-#define CIA_ICR_TA 0x01
-#define CIA_ICR_TB 0x02
-#define CIA_ICR_ALRM 0x04
-#define CIA_ICR_SP 0x08
-#define CIA_ICR_FLG 0x10
-#define CIA_ICR_ALL 0x1f
-#define CIA_ICR_SETCLR 0x80
-
-extern void amiga_init_IRQ(void);
-
-/* to access the interrupt control registers of CIA's use only
-** these functions, they behave exactly like the amiga os routines
-*/
-
-extern struct ciabase ciaa_base, ciab_base;
-
-extern void cia_init_IRQ(struct ciabase *base);
-extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask);
-extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask);
-
-#endif /* asm-m68k/amigaints.h */
+++ /dev/null
-/*
-** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
-** found on the Amiga 1200
-** This information was found by disassembling card.resource,
-** so the definitions may not be 100% correct
-** anyone has an official doc ?
-**
-** Copyright 1997 by Alain Malek
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 11/28/97 by Alain Malek
-*/
-
-#ifndef _M68K_AMIGAYLE_H_
-#define _M68K_AMIGAYLE_H_
-
-#include <linux/types.h>
-#include <asm/amigahw.h>
-
-/* memory layout */
-
-#define GAYLE_RAM (0x600000+zTwoBase)
-#define GAYLE_RAMSIZE (0x400000)
-#define GAYLE_ATTRIBUTE (0xa00000+zTwoBase)
-#define GAYLE_ATTRIBUTESIZE (0x020000)
-#define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */
-#define GAYLE_IOSIZE (0x010000)
-#define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */
-
-/* offset for accessing odd IO registers */
-#define GAYLE_ODD (GAYLE_IO_8BITODD-GAYLE_IO-1)
-
-/* GAYLE registers */
-
-struct GAYLE {
- u_char cardstatus;
- u_char pad0[0x1000-1];
-
- u_char intreq;
- u_char pad1[0x1000-1];
-
- u_char inten;
- u_char pad2[0x1000-1];
-
- u_char config;
- u_char pad3[0x1000-1];
-};
-
-#define GAYLE_ADDRESS (0xda8000) /* gayle main registers base address */
-
-#define GAYLE_RESET (0xa40000) /* write 0x00 to start reset,
- read 1 byte to stop reset */
-
-#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
-#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
-
-#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))
-
-#if 0
-#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
-#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
-
-#define gayle_inw(a) readw( GAYLE_IO+(a) )
-#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
-#endif
-
-/* GAYLE_CARDSTATUS bit def */
-
-#define GAYLE_CS_CCDET 0x40 /* credit card detect */
-#define GAYLE_CS_BVD1 0x20 /* battery voltage detect 1 */
-#define GAYLE_CS_SC 0x20 /* credit card status change */
-#define GAYLE_CS_BVD2 0x10 /* battery voltage detect 2 */
-#define GAYLE_CS_DA 0x10 /* digital audio */
-#define GAYLE_CS_WR 0x08 /* write enable (1 == enabled) */
-#define GAYLE_CS_BSY 0x04 /* credit card busy */
-#define GAYLE_CS_IRQ 0x04 /* interrupt request */
-
-/* GAYLE_IRQ bit def */
-
-#define GAYLE_IRQ_IDE 0x80
-#define GAYLE_IRQ_CCDET 0x40
-#define GAYLE_IRQ_BVD1 0x20
-#define GAYLE_IRQ_SC 0x20
-#define GAYLE_IRQ_BVD2 0x10
-#define GAYLE_IRQ_DA 0x10
-#define GAYLE_IRQ_WR 0x08
-#define GAYLE_IRQ_BSY 0x04
-#define GAYLE_IRQ_IRQ 0x04
-#define GAYLE_IRQ_IDEACK1 0x02
-#define GAYLE_IRQ_IDEACK0 0x01
-
-/* GAYLE_CONFIG bit def
- (bit 0-1 for program voltage, bit 2-3 for access speed */
-
-#define GAYLE_CFG_0V 0x00
-#define GAYLE_CFG_5V 0x01
-#define GAYLE_CFG_12V 0x02
-
-#define GAYLE_CFG_100NS 0x08
-#define GAYLE_CFG_150NS 0x04
-#define GAYLE_CFG_250NS 0x00
-#define GAYLE_CFG_720NS 0x0c
-
-#endif /* asm-m68k/amigayle.h */
+++ /dev/null
-/*
-** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions
-**
-** Copyright 1997 by Alain Malek
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 12/10/97 by Alain Malek
-*/
-
-#ifndef __AMIGA_PCMCIA_H__
-#define __AMIGA_PCMCIA_H__
-
-#include <asm/amigayle.h>
-
-/* prototypes */
-
-void pcmcia_reset(void);
-int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len);
-void pcmcia_program_voltage(int voltage);
-void pcmcia_access_speed(int speed);
-void pcmcia_write_enable(void);
-void pcmcia_write_disable(void);
-
-static inline u_char pcmcia_read_status(void)
-{
- return (gayle.cardstatus & 0x7c);
-}
-
-static inline u_char pcmcia_get_intreq(void)
-{
- return (gayle.intreq);
-}
-
-static inline void pcmcia_ack_int(u_char intreq)
-{
- gayle.intreq = 0xf8;
-}
-
-static inline void pcmcia_enable_irq(void)
-{
- gayle.inten |= GAYLE_IRQ_IRQ;
-}
-
-static inline void pcmcia_disable_irq(void)
-{
- gayle.inten &= ~GAYLE_IRQ_IRQ;
-}
-
-#define PCMCIA_INSERTED (gayle.cardstatus & GAYLE_CS_CCDET)
-
-/* valid voltages for pcmcia_ProgramVoltage */
-
-#define PCMCIA_0V 0
-#define PCMCIA_5V 5
-#define PCMCIA_12V 12
-
-/* valid speeds for pcmcia_AccessSpeed */
-
-#define PCMCIA_SPEED_100NS 100
-#define PCMCIA_SPEED_150NS 150
-#define PCMCIA_SPEED_250NS 250
-#define PCMCIA_SPEED_720NS 720
-
-/* PCMCIA Tuple codes */
-
-#define CISTPL_NULL 0x00
-#define CISTPL_DEVICE 0x01
-#define CISTPL_LONGLINK_CB 0x02
-#define CISTPL_CONFIG_CB 0x04
-#define CISTPL_CFTABLE_ENTRY_CB 0x05
-#define CISTPL_LONGLINK_MFC 0x06
-#define CISTPL_BAR 0x07
-#define CISTPL_CHECKSUM 0x10
-#define CISTPL_LONGLINK_A 0x11
-#define CISTPL_LONGLINK_C 0x12
-#define CISTPL_LINKTARGET 0x13
-#define CISTPL_NO_LINK 0x14
-#define CISTPL_VERS_1 0x15
-#define CISTPL_ALTSTR 0x16
-#define CISTPL_DEVICE_A 0x17
-#define CISTPL_JEDEC_C 0x18
-#define CISTPL_JEDEC_A 0x19
-#define CISTPL_CONFIG 0x1a
-#define CISTPL_CFTABLE_ENTRY 0x1b
-#define CISTPL_DEVICE_OC 0x1c
-#define CISTPL_DEVICE_OA 0x1d
-#define CISTPL_DEVICE_GEO 0x1e
-#define CISTPL_DEVICE_GEO_A 0x1f
-#define CISTPL_MANFID 0x20
-#define CISTPL_FUNCID 0x21
-#define CISTPL_FUNCE 0x22
-#define CISTPL_SWIL 0x23
-#define CISTPL_END 0xff
-
-/* FUNCID */
-
-#define CISTPL_FUNCID_MULTI 0x00
-#define CISTPL_FUNCID_MEMORY 0x01
-#define CISTPL_FUNCID_SERIAL 0x02
-#define CISTPL_FUNCID_PARALLEL 0x03
-#define CISTPL_FUNCID_FIXED 0x04
-#define CISTPL_FUNCID_VIDEO 0x05
-#define CISTPL_FUNCID_NETWORK 0x06
-#define CISTPL_FUNCID_AIMS 0x07
-#define CISTPL_FUNCID_SCSI 0x08
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_APOLLO_DMA_H
-#define _ASM_APOLLO_DMA_H
-
-#include <asm/apollohw.h> /* need byte IO */
-#include <linux/spinlock.h> /* And spinlocks */
-#include <linux/delay.h>
-
-
-#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
-#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE)))
-
-/*
- * NOTES about DMA transfers:
- *
- * controller 1: channels 0-3, byte operations, ports 00-1F
- * controller 2: channels 4-7, word operations, ports C0-DF
- *
- * - ALL registers are 8 bits only, regardless of transfer size
- * - channel 4 is not used - cascades 1 into 2.
- * - channels 0-3 are byte - addresses/counts are for physical bytes
- * - channels 5-7 are word - addresses/counts are for physical words
- * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- * - transfer count loaded to registers is 1 less than actual count
- * - controller 2 offsets are all even (2x offsets for controller 1)
- * - page registers for 5-7 don't use data bit 0, represent 128K pages
- * - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- * Address mapping for channels 0-3:
- *
- * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * P7 ... P0 A7 ... A0 A7 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Address mapping for channels 5-7:
- *
- * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
- * | ... | \ \ ... \ \ \ ... \ \
- * | ... | \ \ ... \ \ \ ... \ (not used)
- * | ... | \ \ ... \ \ \ ... \
- * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS 8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */
-#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */
-#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */
-#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
-#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */
-#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
-#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */
-#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
-
-#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */
-#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */
-#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */
-#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
-#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */
-#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
-#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */
-#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
-
-#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */
-#define DMA_ADDR_1 (IO_DMA1_BASE+0x02)
-#define DMA_ADDR_2 (IO_DMA1_BASE+0x04)
-#define DMA_ADDR_3 (IO_DMA1_BASE+0x06)
-#define DMA_ADDR_4 (IO_DMA2_BASE+0x00)
-#define DMA_ADDR_5 (IO_DMA2_BASE+0x04)
-#define DMA_ADDR_6 (IO_DMA2_BASE+0x08)
-#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C)
-
-#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */
-#define DMA_CNT_1 (IO_DMA1_BASE+0x03)
-#define DMA_CNT_2 (IO_DMA1_BASE+0x05)
-#define DMA_CNT_3 (IO_DMA1_BASE+0x07)
-#define DMA_CNT_4 (IO_DMA2_BASE+0x02)
-#define DMA_CNT_5 (IO_DMA2_BASE+0x06)
-#define DMA_CNT_6 (IO_DMA2_BASE+0x0A)
-#define DMA_CNT_7 (IO_DMA2_BASE+0x0E)
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-#define DMA_8BIT 0
-#define DMA_16BIT 1
-#define DMA_BUSMASTER 2
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(0, DMA1_CLEAR_FF_REG);
- else
- dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
- if (dmanr<=3)
- dma_outb(mode | dmanr, DMA1_MODE_REG);
- else
- dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- if (dmanr <= 3) {
- dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- } else {
- dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- }
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--;
- if (dmanr <= 3) {
- dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- } else {
- dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
-
- return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-/* These are in arch/m68k/apollo/dma.c: */
-extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
-extern void dma_unmap_page(unsigned short dma_addr);
-
-#endif /* _ASM_APOLLO_DMA_H */
+++ /dev/null
-/* apollohw.h : some structures to access apollo HW */
-
-#ifndef _ASMm68k_APOLLOHW_H_
-#define _ASMm68k_APOLLOHW_H_
-
-#include <linux/types.h>
-
-/*
- apollo models
-*/
-
-extern u_long apollo_model;
-
-#define APOLLO_UNKNOWN (0)
-#define APOLLO_DN3000 (1)
-#define APOLLO_DN3010 (2)
-#define APOLLO_DN3500 (3)
-#define APOLLO_DN4000 (4)
-#define APOLLO_DN4500 (5)
-
-/*
- see scn2681 data sheet for more info.
- member names are read_write.
-*/
-
-#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x
-
-struct SCN2681 {
-
- DECLARE_2681_FIELD(mra);
- DECLARE_2681_FIELD(sra_csra);
- DECLARE_2681_FIELD(BRGtest_cra);
- DECLARE_2681_FIELD(rhra_thra);
- DECLARE_2681_FIELD(ipcr_acr);
- DECLARE_2681_FIELD(isr_imr);
- DECLARE_2681_FIELD(ctu_ctur);
- DECLARE_2681_FIELD(ctl_ctlr);
- DECLARE_2681_FIELD(mrb);
- DECLARE_2681_FIELD(srb_csrb);
- DECLARE_2681_FIELD(tst_crb);
- DECLARE_2681_FIELD(rhrb_thrb);
- DECLARE_2681_FIELD(reserved);
- DECLARE_2681_FIELD(ip_opcr);
- DECLARE_2681_FIELD(startCnt_setOutBit);
- DECLARE_2681_FIELD(stopCnt_resetOutBit);
-
-};
-
-#if 0
-struct mc146818 {
-
- unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4,
- minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4;
- unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4,
- day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4;
- unsigned int month1:4, month2:4, year1:4, year2:4, :16;
-
-};
-#endif
-
-struct mc146818 {
- unsigned char second, alarm_second;
- unsigned char minute, alarm_minute;
- unsigned char hours, alarm_hours;
- unsigned char day_of_week, day_of_month;
- unsigned char month, year;
-};
-
-
-#define IO_BASE 0x80000000
-
-extern u_long sio01_physaddr;
-extern u_long sio23_physaddr;
-extern u_long rtc_physaddr;
-extern u_long pica_physaddr;
-extern u_long picb_physaddr;
-extern u_long cpuctrl_physaddr;
-extern u_long timer_physaddr;
-
-#define SAU7_SIO01_PHYSADDR 0x10400
-#define SAU7_SIO23_PHYSADDR 0x10500
-#define SAU7_RTC_PHYSADDR 0x10900
-#define SAU7_PICA 0x11000
-#define SAU7_PICB 0x11100
-#define SAU7_CPUCTRL 0x10100
-#define SAU7_TIMER 0x010800
-
-#define SAU8_SIO01_PHYSADDR 0x8400
-#define SAU8_RTC_PHYSADDR 0x8900
-#define SAU8_PICA 0x9400
-#define SAU8_PICB 0x9500
-#define SAU8_CPUCTRL 0x8100
-#define SAU8_TIMER 0x8800
-
-#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr)))
-#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr)))
-#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr)))
-#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
-#define pica (IO_BASE + pica_physaddr)
-#define picb (IO_BASE + picb_physaddr)
-#define timer (IO_BASE + timer_physaddr)
-#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
-
-#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
-
-#define IRQ_APOLLO IRQ_USER
-
-#endif
+++ /dev/null
-#ifndef _ASM_M68K_FD_H
-#define _ASM_M68K_FD_H
-
-/* Definitions for the Atari Floppy driver */
-
-struct atari_format_descr {
- int track; /* to be formatted */
- int head; /* "" "" */
- int sect_offset; /* offset of first sector */
-};
-
-#endif
+++ /dev/null
-#ifndef _LINUX_FDREG_H
-#define _LINUX_FDREG_H
-
-/*
-** WD1772 stuff
- */
-
-/* register codes */
-
-#define FDCSELREG_STP (0x80) /* command/status register */
-#define FDCSELREG_TRA (0x82) /* track register */
-#define FDCSELREG_SEC (0x84) /* sector register */
-#define FDCSELREG_DTA (0x86) /* data register */
-
-/* register names for FDC_READ/WRITE macros */
-
-#define FDCREG_CMD 0
-#define FDCREG_STATUS 0
-#define FDCREG_TRACK 2
-#define FDCREG_SECTOR 4
-#define FDCREG_DATA 6
-
-/* command opcodes */
-
-#define FDCCMD_RESTORE (0x00) /* - */
-#define FDCCMD_SEEK (0x10) /* | */
-#define FDCCMD_STEP (0x20) /* | TYP 1 Commands */
-#define FDCCMD_STIN (0x40) /* | */
-#define FDCCMD_STOT (0x60) /* - */
-#define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */
-#define FDCCMD_WRSEC (0xa0) /* - " */
-#define FDCCMD_RDADR (0xc0) /* - */
-#define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */
-#define FDCCMD_WRTRA (0xf0) /* - */
-#define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */
-
-/* command modifier bits */
-
-#define FDCCMDADD_SR6 (0x00) /* step rate settings */
-#define FDCCMDADD_SR12 (0x01)
-#define FDCCMDADD_SR2 (0x02)
-#define FDCCMDADD_SR3 (0x03)
-#define FDCCMDADD_V (0x04) /* verify */
-#define FDCCMDADD_H (0x08) /* wait for spin-up */
-#define FDCCMDADD_U (0x10) /* update track register */
-#define FDCCMDADD_M (0x10) /* multiple sector access */
-#define FDCCMDADD_E (0x04) /* head settling flag */
-#define FDCCMDADD_P (0x02) /* precompensation off */
-#define FDCCMDADD_A0 (0x01) /* DAM flag */
-
-/* status register bits */
-
-#define FDCSTAT_MOTORON (0x80) /* motor on */
-#define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */
-#define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */
-#define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */
-#define FDCSTAT_RECNF (0x10) /* record not found */
-#define FDCSTAT_CRC (0x08) /* CRC error */
-#define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */
-#define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */
-#define FDCSTAT_IDX (0x02) /* Index status (Type I) */
-#define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */
-#define FDCSTAT_BUSY (0x01) /* FDC is busy */
-
-
-/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */
-#define DSKSIDE (0x01)
-
-#define DSKDRVNONE (0x06)
-#define DSKDRV0 (0x02)
-#define DSKDRV1 (0x04)
-
-/* step rates */
-#define FDCSTEP_6 0x00
-#define FDCSTEP_12 0x01
-#define FDCSTEP_2 0x02
-#define FDCSTEP_3 0x03
-
-#endif
+++ /dev/null
-#ifndef _LINUX_ATARI_JOYSTICK_H
-#define _LINUX_ATARI_JOYSTICK_H
-
-/*
- * linux/include/linux/atari_joystick.h
- * header file for Atari Joystick driver
- * by Robert de Vries (robert@and.nl) on 19Jul93
- */
-
-void atari_joystick_interrupt(char*);
-int atari_joystick_init(void);
-extern int atari_mouse_buttons;
-
-struct joystick_status {
- char fire;
- char dir;
- int ready;
- int active;
- wait_queue_head_t wait;
-};
-
-#endif
+++ /dev/null
-
-#ifndef _atari_stdma_h
-#define _atari_stdma_h
-
-
-#include <linux/interrupt.h>
-
-
-/***************************** Prototypes *****************************/
-
-void stdma_lock(irq_handler_t handler, void *data);
-void stdma_release( void );
-int stdma_others_waiting( void );
-int stdma_islocked( void );
-void *stdma_locked_by( void );
-void stdma_init( void );
-
-/************************* End of Prototypes **************************/
-
-
-
-#endif /* _atari_stdma_h */
+++ /dev/null
-#ifndef _M68K_ATARI_STRAM_H
-#define _M68K_ATARI_STRAM_H
-
-/*
- * Functions for Atari ST-RAM management
- */
-
-/* public interface */
-void *atari_stram_alloc(long size, const char *owner);
-void atari_stram_free(void *);
-
-/* functions called internally by other parts of the kernel */
-void atari_stram_init(void);
-void atari_stram_reserve_pages(void *start_mem);
-void atari_stram_mem_init_hook (void);
-
-#endif /*_M68K_ATARI_STRAM_H */
+++ /dev/null
-/*
-** linux/atarihw.h -- This header defines some macros and pointers for
-** the various Atari custom hardware registers.
-**
-** Copyright 1994 by Björn Brauel
-**
-** 5/1/94 Roman Hodek:
-** Added definitions for TT specific chips.
-**
-** 1996-09-13 lars brinkhoff <f93labr@dd.chalmers.se>:
-** Finally added definitions for the matrix/codec and the DSP56001 host
-** interface.
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _LINUX_ATARIHW_H_
-#define _LINUX_ATARIHW_H_
-
-#include <linux/types.h>
-#include <asm/bootinfo.h>
-#include <asm/raw_io.h>
-
-extern u_long atari_mch_cookie;
-extern u_long atari_mch_type;
-extern u_long atari_switches;
-extern int atari_rtc_year_offset;
-extern int atari_dont_touch_floppy_select;
-
-/* convenience macros for testing machine type */
-#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST)
-#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
- (atari_mch_cookie & 0xffff) == 0)
-#define MACH_IS_MSTE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
- (atari_mch_cookie & 0xffff) == 0x10)
-#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT)
-#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
-#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA)
-#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40)
-
-/* values for atari_switches */
-#define ATARI_SWITCH_IKBD 0x01
-#define ATARI_SWITCH_MIDI 0x02
-#define ATARI_SWITCH_SND6 0x04
-#define ATARI_SWITCH_SND7 0x08
-#define ATARI_SWITCH_OVSC_SHIFT 16
-#define ATARI_SWITCH_OVSC_IKBD (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_MIDI (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_SND6 (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_SND7 (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_MASK 0xffff0000
-
-/*
- * Define several Hardware-Chips for indication so that for the ATARI we do
- * no longer decide whether it is a Falcon or other machine . It's just
- * important what hardware the machine uses
- */
-
-/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */
-
-#define ATARIHW_DECLARE(name) unsigned name : 1
-#define ATARIHW_SET(name) (atari_hw_present.name = 1)
-#define ATARIHW_PRESENT(name) (atari_hw_present.name)
-
-struct atari_hw_present {
- /* video hardware */
- ATARIHW_DECLARE(STND_SHIFTER); /* ST-Shifter - no base low ! */
- ATARIHW_DECLARE(EXTD_SHIFTER); /* STe-Shifter - 24 bit address */
- ATARIHW_DECLARE(TT_SHIFTER); /* TT-Shifter */
- ATARIHW_DECLARE(VIDEL_SHIFTER); /* Falcon-Shifter */
- /* sound hardware */
- ATARIHW_DECLARE(YM_2149); /* Yamaha YM 2149 */
- ATARIHW_DECLARE(PCM_8BIT); /* PCM-Sound in STe-ATARI */
- ATARIHW_DECLARE(CODEC); /* CODEC Sound (Falcon) */
- /* disk storage interfaces */
- ATARIHW_DECLARE(TT_SCSI); /* Directly mapped NCR5380 */
- ATARIHW_DECLARE(ST_SCSI); /* NCR5380 via ST-DMA (Falcon) */
- ATARIHW_DECLARE(ACSI); /* Standard ACSI like in STs */
- ATARIHW_DECLARE(IDE); /* IDE Interface */
- ATARIHW_DECLARE(FDCSPEED); /* 8/16 MHz switch for FDC */
- /* other I/O hardware */
- ATARIHW_DECLARE(ST_MFP); /* The ST-MFP (there should be no Atari
- without it... but who knows?) */
- ATARIHW_DECLARE(TT_MFP); /* 2nd MFP */
- ATARIHW_DECLARE(SCC); /* Serial Communications Contr. */
- ATARIHW_DECLARE(ST_ESCC); /* SCC Z83230 in an ST */
- ATARIHW_DECLARE(ANALOG_JOY); /* Paddle Interface for STe
- and Falcon */
- ATARIHW_DECLARE(MICROWIRE); /* Microwire Interface */
- /* DMA */
- ATARIHW_DECLARE(STND_DMA); /* 24 Bit limited ST-DMA */
- ATARIHW_DECLARE(EXTD_DMA); /* 32 Bit ST-DMA */
- ATARIHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */
- ATARIHW_DECLARE(SCC_DMA); /* DMA for the SCC */
- /* real time clocks */
- ATARIHW_DECLARE(TT_CLK); /* TT compatible clock chip */
- ATARIHW_DECLARE(MSTE_CLK); /* Mega ST(E) clock chip */
- /* supporting hardware */
- ATARIHW_DECLARE(SCU); /* System Control Unit */
- ATARIHW_DECLARE(BLITTER); /* Blitter */
- ATARIHW_DECLARE(VME); /* VME Bus */
- ATARIHW_DECLARE(DSP56K); /* DSP56k processor in Falcon */
-};
-
-extern struct atari_hw_present atari_hw_present;
-
-
-/* Reading the MFP port register gives a machine independent delay, since the
- * MFP always has a 8 MHz clock. This avoids problems with the varying length
- * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
- */
-#define MFPDELAY() \
- __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
-
-/* Do cache push/invalidate for DMA read/write. This function obeys the
- * snooping on some machines (Medusa) and processors: The Medusa itself can
- * snoop, but only the '040 can source data from its cache to DMA writes i.e.,
- * reads from memory). Both '040 and '060 invalidate cache entries on snooped
- * DMA reads (i.e., writes to memory).
- */
-
-
-#define atari_readb raw_inb
-#define atari_writeb raw_outb
-
-#define atari_inb_p raw_inb
-#define atari_outb_p raw_outb
-
-
-
-#include <linux/mm.h>
-#include <asm/cacheflush.h>
-
-static inline void dma_cache_maintenance( unsigned long paddr,
- unsigned long len,
- int writeflag )
-
-{
- if (writeflag) {
- if (!MACH_IS_MEDUSA || CPU_IS_060)
- cache_push( paddr, len );
- }
- else {
- if (!MACH_IS_MEDUSA)
- cache_clear( paddr, len );
- }
-}
-
-
-/*
-** Shifter
- */
-#define ST_LOW 0
-#define ST_MID 1
-#define ST_HIGH 2
-#define TT_LOW 7
-#define TT_MID 4
-#define TT_HIGH 6
-
-#define SHF_BAS (0xffff8200)
-struct SHIFTER
- {
- u_char pad1;
- u_char bas_hi;
- u_char pad2;
- u_char bas_md;
- u_char pad3;
- u_char volatile vcounthi;
- u_char pad4;
- u_char volatile vcountmid;
- u_char pad5;
- u_char volatile vcountlow;
- u_char volatile syncmode;
- u_char pad6;
- u_char pad7;
- u_char bas_lo;
- };
-# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
-
-#define SHF_FBAS (0xffff820e)
-struct SHIFTER_F030
- {
- u_short off_next;
- u_short scn_width;
- };
-# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS))
-
-
-#define SHF_TBAS (0xffff8200)
-struct SHIFTER_TT {
- u_char char_dummy0;
- u_char bas_hi; /* video mem base addr, high and mid byte */
- u_char char_dummy1;
- u_char bas_md;
- u_char char_dummy2;
- u_char vcount_hi; /* pointer to currently displayed byte */
- u_char char_dummy3;
- u_char vcount_md;
- u_char char_dummy4;
- u_char vcount_lo;
- u_short st_sync; /* ST compatible sync mode register, unused */
- u_char char_dummy5;
- u_char bas_lo; /* video mem addr, low byte */
- u_char char_dummy6[2+3*16];
- /* $ffff8240: */
- u_short color_reg[16]; /* 16 color registers */
- u_char st_shiftmode; /* ST compatible shift mode register, unused */
- u_char char_dummy7;
- u_short tt_shiftmode; /* TT shift mode register */
-
-
-};
-#define shifter_tt ((*(volatile struct SHIFTER_TT *)SHF_TBAS))
-
-/* values for shifter_tt->tt_shiftmode */
-#define TT_SHIFTER_STLOW 0x0000
-#define TT_SHIFTER_STMID 0x0100
-#define TT_SHIFTER_STHIGH 0x0200
-#define TT_SHIFTER_TTLOW 0x0700
-#define TT_SHIFTER_TTMID 0x0400
-#define TT_SHIFTER_TTHIGH 0x0600
-#define TT_SHIFTER_MODEMASK 0x0700
-#define TT_SHIFTER_NUMMODE 0x0008
-#define TT_SHIFTER_PALETTE_MASK 0x000f
-#define TT_SHIFTER_GRAYMODE 0x1000
-
-/* 256 TT palette registers */
-#define TT_PALETTE_BASE (0xffff8400)
-#define tt_palette ((volatile u_short *)TT_PALETTE_BASE)
-
-#define TT_PALETTE_RED_MASK 0x0f00
-#define TT_PALETTE_GREEN_MASK 0x00f0
-#define TT_PALETTE_BLUE_MASK 0x000f
-
-/*
-** Falcon030 VIDEL Video Controller
-** for description see File 'linux\tools\atari\hardware.txt
- */
-#define f030_col ((u_long *) 0xffff9800)
-#define f030_xreg ((u_short*) 0xffff8282)
-#define f030_yreg ((u_short*) 0xffff82a2)
-#define f030_creg ((u_short*) 0xffff82c0)
-#define f030_sreg ((u_short*) 0xffff8260)
-#define f030_mreg ((u_short*) 0xffff820a)
-#define f030_linewidth ((u_short*) 0xffff820e)
-#define f030_hscroll ((u_char*) 0xffff8265)
-
-#define VIDEL_BAS (0xffff8260)
-struct VIDEL {
- u_short st_shift;
- u_short pad1;
- u_char xoffset_s;
- u_char xoffset;
- u_short f_shift;
- u_char pad2[0x1a];
- u_short hht;
- u_short hbb;
- u_short hbe;
- u_short hdb;
- u_short hde;
- u_short hss;
- u_char pad3[0x14];
- u_short vft;
- u_short vbb;
- u_short vbe;
- u_short vdb;
- u_short vde;
- u_short vss;
- u_char pad4[0x12];
- u_short control;
- u_short mode;
-};
-#define videl ((*(volatile struct VIDEL *)VIDEL_BAS))
-
-/*
-** DMA/WD1772 Disk Controller
- */
-
-#define FWD_BAS (0xffff8604)
-struct DMA_WD
- {
- u_short fdc_acces_seccount;
- u_short dma_mode_status;
- u_char dma_vhi; /* Some extended ST-DMAs can handle 32 bit addresses */
- u_char dma_hi;
- u_char char_dummy2;
- u_char dma_md;
- u_char char_dummy3;
- u_char dma_lo;
- u_short fdc_speed;
- };
-# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS))
-/* alias */
-#define st_dma dma_wd
-/* The two highest bytes of an extended DMA as a short; this is a must
- * for the Medusa.
- */
-#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608))
-
-/*
-** YM2149 Sound Chip
-** access in bytes
- */
-
-#define YM_BAS (0xffff8800)
-struct SOUND_YM
- {
- u_char rd_data_reg_sel;
- u_char char_dummy1;
- u_char wd_data;
- };
-#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS))
-
-/* TT SCSI DMA */
-
-#define TT_SCSI_DMA_BAS (0xffff8700)
-struct TT_DMA {
- u_char char_dummy0;
- u_char dma_addr_hi;
- u_char char_dummy1;
- u_char dma_addr_hmd;
- u_char char_dummy2;
- u_char dma_addr_lmd;
- u_char char_dummy3;
- u_char dma_addr_lo;
- u_char char_dummy4;
- u_char dma_cnt_hi;
- u_char char_dummy5;
- u_char dma_cnt_hmd;
- u_char char_dummy6;
- u_char dma_cnt_lmd;
- u_char char_dummy7;
- u_char dma_cnt_lo;
- u_long dma_restdata;
- u_short dma_ctrl;
-};
-#define tt_scsi_dma ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS))
-
-/* TT SCSI Controller 5380 */
-
-#define TT_5380_BAS (0xffff8781)
-struct TT_5380 {
- u_char scsi_data;
- u_char char_dummy1;
- u_char scsi_icr;
- u_char char_dummy2;
- u_char scsi_mode;
- u_char char_dummy3;
- u_char scsi_tcr;
- u_char char_dummy4;
- u_char scsi_idstat;
- u_char char_dummy5;
- u_char scsi_dmastat;
- u_char char_dummy6;
- u_char scsi_targrcv;
- u_char char_dummy7;
- u_char scsi_inircv;
-};
-#define tt_scsi ((*(volatile struct TT_5380 *)TT_5380_BAS))
-#define tt_scsi_regp ((volatile char *)TT_5380_BAS)
-
-
-/*
-** Falcon DMA Sound Subsystem
- */
-
-#define MATRIX_BASE (0xffff8930)
-struct MATRIX
-{
- u_short source;
- u_short destination;
- u_char external_frequency_divider;
- u_char internal_frequency_divider;
-};
-#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE)
-
-#define CODEC_BASE (0xffff8936)
-struct CODEC
-{
- u_char tracks;
- u_char input_source;
-#define CODEC_SOURCE_ADC 1
-#define CODEC_SOURCE_MATRIX 2
- u_char adc_source;
-#define ADC_SOURCE_RIGHT_PSG 1
-#define ADC_SOURCE_LEFT_PSG 2
- u_char gain;
-#define CODEC_GAIN_RIGHT 0x0f
-#define CODEC_GAIN_LEFT 0xf0
- u_char attenuation;
-#define CODEC_ATTENUATION_RIGHT 0x0f
-#define CODEC_ATTENUATION_LEFT 0xf0
- u_char unused1;
- u_char status;
-#define CODEC_OVERFLOW_RIGHT 1
-#define CODEC_OVERFLOW_LEFT 2
- u_char unused2, unused3, unused4, unused5;
- u_char gpio_directions;
-#define GPIO_IN 0
-#define GPIO_OUT 1
- u_char unused6;
- u_char gpio_data;
-};
-#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE)
-
-/*
-** Falcon Blitter
-*/
-
-#define BLT_BAS (0xffff8a00)
-
-struct BLITTER
- {
- u_short halftone[16];
- u_short src_x_inc;
- u_short src_y_inc;
- u_long src_address;
- u_short endmask1;
- u_short endmask2;
- u_short endmask3;
- u_short dst_x_inc;
- u_short dst_y_inc;
- u_long dst_address;
- u_short wd_per_line;
- u_short ln_per_bb;
- u_short hlf_op_reg;
- u_short log_op_reg;
- u_short lin_nm_reg;
- u_short skew_reg;
- };
-# define blitter ((*(volatile struct BLITTER *)BLT_BAS))
-
-
-/*
-** SCC Z8530
- */
-
-#define SCC_BAS (0xffff8c81)
-struct SCC
- {
- u_char cha_a_ctrl;
- u_char char_dummy1;
- u_char cha_a_data;
- u_char char_dummy2;
- u_char cha_b_ctrl;
- u_char char_dummy3;
- u_char cha_b_data;
- };
-# define scc ((*(volatile struct SCC*)SCC_BAS))
-
-/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
-# define st_escc ((*(volatile struct SCC*)0xfffffa31))
-# define st_escc_dsr ((*(volatile char *)0xfffffa39))
-
-/* TT SCC DMA Controller (same chip as SCSI DMA) */
-
-#define TT_SCC_DMA_BAS (0xffff8c00)
-#define tt_scc_dma ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS))
-
-/*
-** VIDEL Palette Register
- */
-
-#define FPL_BAS (0xffff9800)
-struct VIDEL_PALETTE
- {
- u_long reg[256];
- };
-# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS))
-
-
-/*
-** Falcon DSP Host Interface
- */
-
-#define DSP56K_HOST_INTERFACE_BASE (0xffffa200)
-struct DSP56K_HOST_INTERFACE {
- u_char icr;
-#define DSP56K_ICR_RREQ 0x01
-#define DSP56K_ICR_TREQ 0x02
-#define DSP56K_ICR_HF0 0x08
-#define DSP56K_ICR_HF1 0x10
-#define DSP56K_ICR_HM0 0x20
-#define DSP56K_ICR_HM1 0x40
-#define DSP56K_ICR_INIT 0x80
-
- u_char cvr;
-#define DSP56K_CVR_HV_MASK 0x1f
-#define DSP56K_CVR_HC 0x80
-
- u_char isr;
-#define DSP56K_ISR_RXDF 0x01
-#define DSP56K_ISR_TXDE 0x02
-#define DSP56K_ISR_TRDY 0x04
-#define DSP56K_ISR_HF2 0x08
-#define DSP56K_ISR_HF3 0x10
-#define DSP56K_ISR_DMA 0x40
-#define DSP56K_ISR_HREQ 0x80
-
- u_char ivr;
-
- union {
- u_char b[4];
- u_short w[2];
- u_long l;
- } data;
-};
-#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE))
-
-/*
-** MFP 68901
- */
-
-#define MFP_BAS (0xfffffa01)
-struct MFP
- {
- u_char par_dt_reg;
- u_char char_dummy1;
- u_char active_edge;
- u_char char_dummy2;
- u_char data_dir;
- u_char char_dummy3;
- u_char int_en_a;
- u_char char_dummy4;
- u_char int_en_b;
- u_char char_dummy5;
- u_char int_pn_a;
- u_char char_dummy6;
- u_char int_pn_b;
- u_char char_dummy7;
- u_char int_sv_a;
- u_char char_dummy8;
- u_char int_sv_b;
- u_char char_dummy9;
- u_char int_mk_a;
- u_char char_dummy10;
- u_char int_mk_b;
- u_char char_dummy11;
- u_char vec_adr;
- u_char char_dummy12;
- u_char tim_ct_a;
- u_char char_dummy13;
- u_char tim_ct_b;
- u_char char_dummy14;
- u_char tim_ct_cd;
- u_char char_dummy15;
- u_char tim_dt_a;
- u_char char_dummy16;
- u_char tim_dt_b;
- u_char char_dummy17;
- u_char tim_dt_c;
- u_char char_dummy18;
- u_char tim_dt_d;
- u_char char_dummy19;
- u_char sync_char;
- u_char char_dummy20;
- u_char usart_ctr;
- u_char char_dummy21;
- u_char rcv_stat;
- u_char char_dummy22;
- u_char trn_stat;
- u_char char_dummy23;
- u_char usart_dta;
- };
-# define mfp ((*(volatile struct MFP*)MFP_BAS))
-
-/* TT's second MFP */
-
-#define TT_MFP_BAS (0xfffffa81)
-# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS))
-
-
-/* TT System Control Unit */
-
-#define TT_SCU_BAS (0xffff8e01)
-struct TT_SCU {
- u_char sys_mask;
- u_char char_dummy1;
- u_char sys_stat;
- u_char char_dummy2;
- u_char softint;
- u_char char_dummy3;
- u_char vmeint;
- u_char char_dummy4;
- u_char gp_reg1;
- u_char char_dummy5;
- u_char gp_reg2;
- u_char char_dummy6;
- u_char vme_mask;
- u_char char_dummy7;
- u_char vme_stat;
-};
-#define tt_scu ((*(volatile struct TT_SCU *)TT_SCU_BAS))
-
-/* TT real time clock */
-
-#define TT_RTC_BAS (0xffff8961)
-struct TT_RTC {
- u_char regsel;
- u_char dummy;
- u_char data;
-};
-#define tt_rtc ((*(volatile struct TT_RTC *)TT_RTC_BAS))
-
-
-/*
-** ACIA 6850
- */
-/* constants for the ACIA registers */
-
-/* baudrate selection and reset (Baudrate = clock/factor) */
-#define ACIA_DIV1 0
-#define ACIA_DIV16 1
-#define ACIA_DIV64 2
-#define ACIA_RESET 3
-
-/* character format */
-#define ACIA_D7E2S (0<<2) /* 7 data, even parity, 2 stop */
-#define ACIA_D7O2S (1<<2) /* 7 data, odd parity, 2 stop */
-#define ACIA_D7E1S (2<<2) /* 7 data, even parity, 1 stop */
-#define ACIA_D7O1S (3<<2) /* 7 data, odd parity, 1 stop */
-#define ACIA_D8N2S (4<<2) /* 8 data, no parity, 2 stop */
-#define ACIA_D8N1S (5<<2) /* 8 data, no parity, 1 stop */
-#define ACIA_D8E1S (6<<2) /* 8 data, even parity, 1 stop */
-#define ACIA_D8O1S (7<<2) /* 8 data, odd parity, 1 stop */
-
-/* transmit control */
-#define ACIA_RLTID (0<<5) /* RTS low, TxINT disabled */
-#define ACIA_RLTIE (1<<5) /* RTS low, TxINT enabled */
-#define ACIA_RHTID (2<<5) /* RTS high, TxINT disabled */
-#define ACIA_RLTIDSB (3<<5) /* RTS low, TxINT disabled, send break */
-
-/* receive control */
-#define ACIA_RID (0<<7) /* RxINT disabled */
-#define ACIA_RIE (1<<7) /* RxINT enabled */
-
-/* status fields of the ACIA */
-#define ACIA_RDRF 1 /* Receive Data Register Full */
-#define ACIA_TDRE (1<<1) /* Transmit Data Register Empty */
-#define ACIA_DCD (1<<2) /* Data Carrier Detect */
-#define ACIA_CTS (1<<3) /* Clear To Send */
-#define ACIA_FE (1<<4) /* Framing Error */
-#define ACIA_OVRN (1<<5) /* Receiver Overrun */
-#define ACIA_PE (1<<6) /* Parity Error */
-#define ACIA_IRQ (1<<7) /* Interrupt Request */
-
-#define ACIA_BAS (0xfffffc00)
-struct ACIA
- {
- u_char key_ctrl;
- u_char char_dummy1;
- u_char key_data;
- u_char char_dummy2;
- u_char mid_ctrl;
- u_char char_dummy3;
- u_char mid_data;
- };
-# define acia ((*(volatile struct ACIA*)ACIA_BAS))
-
-#define TT_DMASND_BAS (0xffff8900)
-struct TT_DMASND {
- u_char int_ctrl; /* Falcon: Interrupt control */
- u_char ctrl;
- u_char pad2;
- u_char bas_hi;
- u_char pad3;
- u_char bas_mid;
- u_char pad4;
- u_char bas_low;
- u_char pad5;
- u_char addr_hi;
- u_char pad6;
- u_char addr_mid;
- u_char pad7;
- u_char addr_low;
- u_char pad8;
- u_char end_hi;
- u_char pad9;
- u_char end_mid;
- u_char pad10;
- u_char end_low;
- u_char pad11[12];
- u_char track_select; /* Falcon */
- u_char mode;
- u_char pad12[14];
- /* Falcon only: */
- u_short cbar_src;
- u_short cbar_dst;
- u_char ext_div;
- u_char int_div;
- u_char rec_track_select;
- u_char dac_src;
- u_char adc_src;
- u_char input_gain;
- u_short output_atten;
-};
-# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS))
-
-#define DMASND_MFP_INT_REPLAY 0x01
-#define DMASND_MFP_INT_RECORD 0x02
-#define DMASND_TIMERA_INT_REPLAY 0x04
-#define DMASND_TIMERA_INT_RECORD 0x08
-
-#define DMASND_CTRL_OFF 0x00
-#define DMASND_CTRL_ON 0x01
-#define DMASND_CTRL_REPEAT 0x02
-#define DMASND_CTRL_RECORD_ON 0x10
-#define DMASND_CTRL_RECORD_OFF 0x00
-#define DMASND_CTRL_RECORD_REPEAT 0x20
-#define DMASND_CTRL_SELECT_REPLAY 0x00
-#define DMASND_CTRL_SELECT_RECORD 0x80
-#define DMASND_MODE_MONO 0x80
-#define DMASND_MODE_STEREO 0x00
-#define DMASND_MODE_8BIT 0x00
-#define DMASND_MODE_16BIT 0x40 /* Falcon only */
-#define DMASND_MODE_6KHZ 0x00 /* Falcon: mute */
-#define DMASND_MODE_12KHZ 0x01
-#define DMASND_MODE_25KHZ 0x02
-#define DMASND_MODE_50KHZ 0x03
-
-
-#define DMASNDSetBase(bufstart) \
- do { \
- tt_dmasnd.bas_hi = (unsigned char)(((bufstart) & 0xff0000) >> 16); \
- tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \
- tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \
- } while( 0 )
-
-#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) + \
- (tt_dmasnd.addr_mid << 8) + \
- (tt_dmasnd.addr_low))
-
-#define DMASNDSetEnd(bufend) \
- do { \
- tt_dmasnd.end_hi = (unsigned char)(((bufend) & 0xff0000) >> 16); \
- tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \
- tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \
- } while( 0 )
-
-
-#define TT_MICROWIRE_BAS (0xffff8922)
-struct TT_MICROWIRE {
- u_short data;
- u_short mask;
-};
-# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS))
-
-#define MW_LM1992_ADDR 0x0400
-
-#define MW_LM1992_VOLUME(dB) \
- (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2)))
-#define MW_LM1992_BALLEFT(dB) \
- (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
-#define MW_LM1992_BALRIGHT(dB) \
- (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
-#define MW_LM1992_TREBLE(dB) \
- (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
-#define MW_LM1992_BASS(dB) \
- (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
-
-#define MW_LM1992_PSG_LOW 0x000
-#define MW_LM1992_PSG_HIGH 0x001
-#define MW_LM1992_PSG_OFF 0x002
-
-#define MSTE_RTC_BAS (0xfffffc21)
-
-struct MSTE_RTC {
- u_char sec_ones;
- u_char dummy1;
- u_char sec_tens;
- u_char dummy2;
- u_char min_ones;
- u_char dummy3;
- u_char min_tens;
- u_char dummy4;
- u_char hr_ones;
- u_char dummy5;
- u_char hr_tens;
- u_char dummy6;
- u_char weekday;
- u_char dummy7;
- u_char day_ones;
- u_char dummy8;
- u_char day_tens;
- u_char dummy9;
- u_char mon_ones;
- u_char dummy10;
- u_char mon_tens;
- u_char dummy11;
- u_char year_ones;
- u_char dummy12;
- u_char year_tens;
- u_char dummy13;
- u_char mode;
- u_char dummy14;
- u_char test;
- u_char dummy15;
- u_char reset;
-};
-
-#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
-
-#endif /* linux/atarihw.h */
-
+++ /dev/null
-/*
-** atariints.h -- Atari Linux interrupt handling structs and prototypes
-**
-** Copyright 1994 by Björn Brauel
-**
-** 5/2/94 Roman Hodek:
-** TT interrupt definitions added.
-**
-** 12/02/96: (Roman)
-** Adapted to new int handling scheme (see ataints.c); revised numbering
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _LINUX_ATARIINTS_H_
-#define _LINUX_ATARIINTS_H_
-
-#include <asm/irq.h>
-#include <asm/atarihw.h>
-
-/*
-** Atari Interrupt sources.
-**
-*/
-
-#define STMFP_SOURCE_BASE 8
-#define TTMFP_SOURCE_BASE 24
-#define SCC_SOURCE_BASE 40
-#define VME_SOURCE_BASE 56
-#define VME_MAX_SOURCES 16
-
-#define NUM_ATARI_SOURCES (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE)
-
-/* convert vector number to int source number */
-#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
-
-/* convert irq_handler index to vector number */
-#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8)))
-
-/* interrupt service types */
-#define IRQ_TYPE_SLOW 0
-#define IRQ_TYPE_FAST 1
-#define IRQ_TYPE_PRIO 2
-
-/* ST-MFP interrupts */
-#define IRQ_MFP_BUSY (8)
-#define IRQ_MFP_DCD (9)
-#define IRQ_MFP_CTS (10)
-#define IRQ_MFP_GPU (11)
-#define IRQ_MFP_TIMD (12)
-#define IRQ_MFP_TIMC (13)
-#define IRQ_MFP_ACIA (14)
-#define IRQ_MFP_FDC (15)
-#define IRQ_MFP_ACSI IRQ_MFP_FDC
-#define IRQ_MFP_FSCSI IRQ_MFP_FDC
-#define IRQ_MFP_IDE IRQ_MFP_FDC
-#define IRQ_MFP_TIMB (16)
-#define IRQ_MFP_SERERR (17)
-#define IRQ_MFP_SEREMPT (18)
-#define IRQ_MFP_RECERR (19)
-#define IRQ_MFP_RECFULL (20)
-#define IRQ_MFP_TIMA (21)
-#define IRQ_MFP_RI (22)
-#define IRQ_MFP_MMD (23)
-
-/* TT-MFP interrupts */
-#define IRQ_TT_MFP_IO0 (24)
-#define IRQ_TT_MFP_IO1 (25)
-#define IRQ_TT_MFP_SCC (26)
-#define IRQ_TT_MFP_RI (27)
-#define IRQ_TT_MFP_TIMD (28)
-#define IRQ_TT_MFP_TIMC (29)
-#define IRQ_TT_MFP_DRVRDY (30)
-#define IRQ_TT_MFP_SCSIDMA (31)
-#define IRQ_TT_MFP_TIMB (32)
-#define IRQ_TT_MFP_SERERR (33)
-#define IRQ_TT_MFP_SEREMPT (34)
-#define IRQ_TT_MFP_RECERR (35)
-#define IRQ_TT_MFP_RECFULL (36)
-#define IRQ_TT_MFP_TIMA (37)
-#define IRQ_TT_MFP_RTC (38)
-#define IRQ_TT_MFP_SCSI (39)
-
-/* SCC interrupts */
-#define IRQ_SCCB_TX (40)
-#define IRQ_SCCB_STAT (42)
-#define IRQ_SCCB_RX (44)
-#define IRQ_SCCB_SPCOND (46)
-#define IRQ_SCCA_TX (48)
-#define IRQ_SCCA_STAT (50)
-#define IRQ_SCCA_RX (52)
-#define IRQ_SCCA_SPCOND (54)
-
-
-#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */
-#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */
-
-
-#define MFP_ENABLE 0
-#define MFP_PENDING 1
-#define MFP_SERVICE 2
-#define MFP_MASK 3
-
-/* Utility functions for setting/clearing bits in the interrupt registers of
- * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is
- * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */
-
-static inline int get_mfp_bit( unsigned irq, int type )
-
-{ unsigned char mask, *reg;
-
- mask = 1 << (irq & 7);
- reg = (unsigned char *)&mfp.int_en_a + type*4 +
- ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
- return( *reg & mask );
-}
-
-static inline void set_mfp_bit( unsigned irq, int type )
-
-{ unsigned char mask, *reg;
-
- mask = 1 << (irq & 7);
- reg = (unsigned char *)&mfp.int_en_a + type*4 +
- ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
- __asm__ __volatile__ ( "orb %0,%1"
- : : "di" (mask), "m" (*reg) : "memory" );
-}
-
-static inline void clear_mfp_bit( unsigned irq, int type )
-
-{ unsigned char mask, *reg;
-
- mask = ~(1 << (irq & 7));
- reg = (unsigned char *)&mfp.int_en_a + type*4 +
- ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
- if (type == MFP_PENDING || type == MFP_SERVICE)
- __asm__ __volatile__ ( "moveb %0,%1"
- : : "di" (mask), "m" (*reg) : "memory" );
- else
- __asm__ __volatile__ ( "andb %0,%1"
- : : "di" (mask), "m" (*reg) : "memory" );
-}
-
-/*
- * {en,dis}able_irq have the usual semantics of temporary blocking the
- * interrupt, but not loosing requests that happen between disabling and
- * enabling. This is done with the MFP mask registers.
- */
-
-static inline void atari_enable_irq( unsigned irq )
-
-{
- if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
- set_mfp_bit( irq, MFP_MASK );
-}
-
-static inline void atari_disable_irq( unsigned irq )
-
-{
- if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
- clear_mfp_bit( irq, MFP_MASK );
-}
-
-/*
- * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not
- * "stored"
- */
-
-static inline void atari_turnon_irq( unsigned irq )
-
-{
- if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
- set_mfp_bit( irq, MFP_ENABLE );
-}
-
-static inline void atari_turnoff_irq( unsigned irq )
-
-{
- if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
- clear_mfp_bit( irq, MFP_ENABLE );
- clear_mfp_bit( irq, MFP_PENDING );
-}
-
-static inline void atari_clear_pending_irq( unsigned irq )
-
-{
- if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
- clear_mfp_bit( irq, MFP_PENDING );
-}
-
-static inline int atari_irq_pending( unsigned irq )
-
-{
- if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 );
- return( get_mfp_bit( irq, MFP_PENDING ) );
-}
-
-unsigned long atari_register_vme_int( void );
-void atari_unregister_vme_int( unsigned long );
-
-#endif /* linux/atariints.h */
+++ /dev/null
-/*
-** atarikb.h -- This header contains the prototypes of functions of
-** the intelligent keyboard of the Atari needed by the
-** mouse and joystick drivers.
-**
-** Copyright 1994 by Robert de Vries
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 20 Feb 1994 by Robert de Vries
-*/
-
-#ifndef _LINUX_ATARIKB_H
-#define _LINUX_ATARIKB_H
-
-void ikbd_write(const char *, int);
-void ikbd_mouse_button_action(int mode);
-void ikbd_mouse_rel_pos(void);
-void ikbd_mouse_abs_pos(int xmax, int ymax);
-void ikbd_mouse_kbd_mode(int dx, int dy);
-void ikbd_mouse_thresh(int x, int y);
-void ikbd_mouse_scale(int x, int y);
-void ikbd_mouse_pos_get(int *x, int *y);
-void ikbd_mouse_pos_set(int x, int y);
-void ikbd_mouse_y0_bot(void);
-void ikbd_mouse_y0_top(void);
-void ikbd_mouse_disable(void);
-void ikbd_joystick_event_on(void);
-void ikbd_joystick_event_off(void);
-void ikbd_joystick_get_state(void);
-void ikbd_joystick_disable(void);
-
-/* Hook for MIDI serial driver */
-extern void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for mouse driver */
-extern void (*atari_mouse_interrupt_hook) (char *);
-/* Hook for keyboard inputdev driver */
-extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
-/* Hook for mouse inputdev driver */
-extern void (*atari_input_mouse_interrupt_hook) (char *);
-
-int atari_keyb_init(void);
-
-#endif /* _LINUX_ATARIKB_H */
+++ /dev/null
-#ifndef __ARCH_M68K_ATOMIC__
-#define __ARCH_M68K_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/system.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-/*
- * We do not have SMP m68k systems, so we don't have to deal with that.
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = i)
-
-static inline void atomic_add(int i, atomic_t *v)
-{
- __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i));
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
- __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i));
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
- __asm__ __volatile__("addql #1,%0" : "+m" (*v));
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
- __asm__ __volatile__("subql #1,%0" : "+m" (*v));
-}
-
-static inline int atomic_dec_and_test(atomic_t *v)
-{
- char c;
- __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
- return c != 0;
-}
-
-static inline int atomic_inc_and_test(atomic_t *v)
-{
- char c;
- __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
- return c != 0;
-}
-
-#ifdef CONFIG_RMW_INSNS
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- int t, tmp;
-
- __asm__ __volatile__(
- "1: movel %2,%1\n"
- " addl %3,%1\n"
- " casl %2,%1,%0\n"
- " jne 1b"
- : "+m" (*v), "=&d" (t), "=&d" (tmp)
- : "g" (i), "2" (atomic_read(v)));
- return t;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- int t, tmp;
-
- __asm__ __volatile__(
- "1: movel %2,%1\n"
- " subl %3,%1\n"
- " casl %2,%1,%0\n"
- " jne 1b"
- : "+m" (*v), "=&d" (t), "=&d" (tmp)
- : "g" (i), "2" (atomic_read(v)));
- return t;
-}
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-#else /* !CONFIG_RMW_INSNS */
-
-static inline int atomic_add_return(int i, atomic_t * v)
-{
- unsigned long flags;
- int t;
-
- local_irq_save(flags);
- t = atomic_read(v);
- t += i;
- atomic_set(v, t);
- local_irq_restore(flags);
-
- return t;
-}
-
-static inline int atomic_sub_return(int i, atomic_t * v)
-{
- unsigned long flags;
- int t;
-
- local_irq_save(flags);
- t = atomic_read(v);
- t -= i;
- atomic_set(v, t);
- local_irq_restore(flags);
-
- return t;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- unsigned long flags;
- int prev;
-
- local_irq_save(flags);
- prev = atomic_read(v);
- if (prev == old)
- atomic_set(v, new);
- local_irq_restore(flags);
- return prev;
-}
-
-static inline int atomic_xchg(atomic_t *v, int new)
-{
- unsigned long flags;
- int prev;
-
- local_irq_save(flags);
- prev = atomic_read(v);
- atomic_set(v, new);
- local_irq_restore(flags);
- return prev;
-}
-
-#endif /* !CONFIG_RMW_INSNS */
-
-#define atomic_dec_return(v) atomic_sub_return(1, (v))
-#define atomic_inc_return(v) atomic_add_return(1, (v))
-
-static inline int atomic_sub_and_test(int i, atomic_t *v)
-{
- char c;
- __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i));
- return c != 0;
-}
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
- char c;
- __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
- return c != 0;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
-}
-
-static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
-}
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* __ARCH_M68K_ATOMIC __ */
+++ /dev/null
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
+++ /dev/null
-#ifndef _M68K_BITOPS_H
-#define _M68K_BITOPS_H
-/*
- * Copyright 1992, Linus Torvalds.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-
-/*
- * Require 68020 or better.
- *
- * They use the standard big-endian m680x0 bit ordering.
- */
-
-#define test_and_set_bit(nr,vaddr) \
- (__builtin_constant_p(nr) ? \
- __constant_test_and_set_bit(nr, vaddr) : \
- __generic_test_and_set_bit(nr, vaddr))
-
-#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr)
-
-static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr)
-{
- char *p = (char *)vaddr + (nr ^ 31) / 8;
- char retval;
-
- __asm__ __volatile__ ("bset %2,%1; sne %0"
- : "=d" (retval), "+m" (*p)
- : "di" (nr & 7));
-
- return retval;
-}
-
-static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr)
-{
- char retval;
-
- __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0"
- : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
-
- return retval;
-}
-
-#define set_bit(nr,vaddr) \
- (__builtin_constant_p(nr) ? \
- __constant_set_bit(nr, vaddr) : \
- __generic_set_bit(nr, vaddr))
-
-#define __set_bit(nr,vaddr) set_bit(nr,vaddr)
-
-static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr)
-{
- char *p = (char *)vaddr + (nr ^ 31) / 8;
- __asm__ __volatile__ ("bset %1,%0"
- : "+m" (*p) : "di" (nr & 7));
-}
-
-static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr)
-{
- __asm__ __volatile__ ("bfset %1{%0:#1}"
- : : "d" (nr^31), "o" (*vaddr) : "memory");
-}
-
-#define test_and_clear_bit(nr,vaddr) \
- (__builtin_constant_p(nr) ? \
- __constant_test_and_clear_bit(nr, vaddr) : \
- __generic_test_and_clear_bit(nr, vaddr))
-
-#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr)
-
-static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr)
-{
- char *p = (char *)vaddr + (nr ^ 31) / 8;
- char retval;
-
- __asm__ __volatile__ ("bclr %2,%1; sne %0"
- : "=d" (retval), "+m" (*p)
- : "di" (nr & 7));
-
- return retval;
-}
-
-static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr)
-{
- char retval;
-
- __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0"
- : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
-
- return retval;
-}
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-#define clear_bit(nr,vaddr) \
- (__builtin_constant_p(nr) ? \
- __constant_clear_bit(nr, vaddr) : \
- __generic_clear_bit(nr, vaddr))
-#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr)
-
-static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr)
-{
- char *p = (char *)vaddr + (nr ^ 31) / 8;
- __asm__ __volatile__ ("bclr %1,%0"
- : "+m" (*p) : "di" (nr & 7));
-}
-
-static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr)
-{
- __asm__ __volatile__ ("bfclr %1{%0:#1}"
- : : "d" (nr^31), "o" (*vaddr) : "memory");
-}
-
-#define test_and_change_bit(nr,vaddr) \
- (__builtin_constant_p(nr) ? \
- __constant_test_and_change_bit(nr, vaddr) : \
- __generic_test_and_change_bit(nr, vaddr))
-
-#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr)
-#define __change_bit(nr,vaddr) change_bit(nr,vaddr)
-
-static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr)
-{
- char *p = (char *)vaddr + (nr ^ 31) / 8;
- char retval;
-
- __asm__ __volatile__ ("bchg %2,%1; sne %0"
- : "=d" (retval), "+m" (*p)
- : "di" (nr & 7));
-
- return retval;
-}
-
-static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr)
-{
- char retval;
-
- __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0"
- : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
-
- return retval;
-}
-
-#define change_bit(nr,vaddr) \
- (__builtin_constant_p(nr) ? \
- __constant_change_bit(nr, vaddr) : \
- __generic_change_bit(nr, vaddr))
-
-static inline void __constant_change_bit(int nr, unsigned long *vaddr)
-{
- char *p = (char *)vaddr + (nr ^ 31) / 8;
- __asm__ __volatile__ ("bchg %1,%0"
- : "+m" (*p) : "di" (nr & 7));
-}
-
-static inline void __generic_change_bit(int nr, unsigned long *vaddr)
-{
- __asm__ __volatile__ ("bfchg %1{%0:#1}"
- : : "d" (nr^31), "o" (*vaddr) : "memory");
-}
-
-static inline int test_bit(int nr, const unsigned long *vaddr)
-{
- return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
-}
-
-static inline int find_first_zero_bit(const unsigned long *vaddr,
- unsigned size)
-{
- const unsigned long *p = vaddr;
- int res = 32;
- unsigned long num;
-
- if (!size)
- return 0;
-
- size = (size + 31) >> 5;
- while (!(num = ~*p++)) {
- if (!--size)
- goto out;
- }
-
- __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
- : "=d" (res) : "d" (num & -num));
- res ^= 31;
-out:
- return ((long)p - (long)vaddr - 4) * 8 + res;
-}
-
-static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
- int offset)
-{
- const unsigned long *p = vaddr + (offset >> 5);
- int bit = offset & 31UL, res;
-
- if (offset >= size)
- return size;
-
- if (bit) {
- unsigned long num = ~*p++ & (~0UL << bit);
- offset -= bit;
-
- /* Look for zero in first longword */
- __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
- : "=d" (res) : "d" (num & -num));
- if (res < 32)
- return offset + (res ^ 31);
- offset += 32;
- }
- /* No zero yet, search remaining full bytes for a zero */
- res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8);
- return offset + res;
-}
-
-static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
-{
- const unsigned long *p = vaddr;
- int res = 32;
- unsigned long num;
-
- if (!size)
- return 0;
-
- size = (size + 31) >> 5;
- while (!(num = *p++)) {
- if (!--size)
- goto out;
- }
-
- __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
- : "=d" (res) : "d" (num & -num));
- res ^= 31;
-out:
- return ((long)p - (long)vaddr - 4) * 8 + res;
-}
-
-static inline int find_next_bit(const unsigned long *vaddr, int size,
- int offset)
-{
- const unsigned long *p = vaddr + (offset >> 5);
- int bit = offset & 31UL, res;
-
- if (offset >= size)
- return size;
-
- if (bit) {
- unsigned long num = *p++ & (~0UL << bit);
- offset -= bit;
-
- /* Look for one in first longword */
- __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
- : "=d" (res) : "d" (num & -num));
- if (res < 32)
- return offset + (res ^ 31);
- offset += 32;
- }
- /* No one yet, search remaining full bytes for a one */
- res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8);
- return offset + res;
-}
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-static inline unsigned long ffz(unsigned long word)
-{
- int res;
-
- __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
- : "=d" (res) : "d" (~word & -~word));
- return res ^ 31;
-}
-
-#ifdef __KERNEL__
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-
-static inline int ffs(int x)
-{
- int cnt;
-
- asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x));
-
- return 32 - cnt;
-}
-#define __ffs(x) (ffs(x) - 1)
-
-/*
- * fls: find last bit set.
- */
-
-static inline int fls(int x)
-{
- int cnt;
-
- asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x));
-
- return 32 - cnt;
-}
-
-static inline int __fls(int x)
-{
- return fls(x) - 1;
-}
-
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-/* Bitmap functions for the minix filesystem */
-
-static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size)
-{
- const unsigned short *p = vaddr, *addr = vaddr;
- int res;
- unsigned short num;
-
- if (!size)
- return 0;
-
- size = (size >> 4) + ((size & 15) > 0);
- while (*p++ == 0xffff)
- {
- if (--size == 0)
- return (p - addr) << 4;
- }
-
- num = ~*--p;
- __asm__ __volatile__ ("bfffo %1{#16,#16},%0"
- : "=d" (res) : "d" (num & -num));
- return ((p - addr) << 4) + (res ^ 31);
-}
-
-#define minix_test_and_set_bit(nr, addr) __test_and_set_bit((nr) ^ 16, (unsigned long *)(addr))
-#define minix_set_bit(nr,addr) __set_bit((nr) ^ 16, (unsigned long *)(addr))
-#define minix_test_and_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr))
-
-static inline int minix_test_bit(int nr, const void *vaddr)
-{
- const unsigned short *p = vaddr;
- return (p[nr >> 4] & (1U << (nr & 15))) != 0;
-}
-
-/* Bitmap functions for the ext2 filesystem. */
-
-#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
-#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
-#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
-#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
-
-static inline int ext2_test_bit(int nr, const void *vaddr)
-{
- const unsigned char *p = vaddr;
- return (p[nr >> 3] & (1U << (nr & 7))) != 0;
-}
-
-static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
-{
- const unsigned long *p = vaddr, *addr = vaddr;
- int res;
-
- if (!size)
- return 0;
-
- size = (size >> 5) + ((size & 31) > 0);
- while (*p++ == ~0UL)
- {
- if (--size == 0)
- return (p - addr) << 5;
- }
-
- --p;
- for (res = 0; res < 32; res++)
- if (!ext2_test_bit (res, p))
- break;
- return (p - addr) * 32 + res;
-}
-
-static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
- unsigned offset)
-{
- const unsigned long *addr = vaddr;
- const unsigned long *p = addr + (offset >> 5);
- int bit = offset & 31UL, res;
-
- if (offset >= size)
- return size;
-
- if (bit) {
- /* Look for zero in first longword */
- for (res = bit; res < 32; res++)
- if (!ext2_test_bit (res, p))
- return (p - addr) * 32 + res;
- p++;
- }
- /* No zero yet, search remaining full bytes for a zero */
- res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
- return (p - addr) * 32 + res;
-}
-
-static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
-{
- const unsigned long *p = vaddr, *addr = vaddr;
- int res;
-
- if (!size)
- return 0;
-
- size = (size >> 5) + ((size & 31) > 0);
- while (*p++ == 0UL) {
- if (--size == 0)
- return (p - addr) << 5;
- }
-
- --p;
- for (res = 0; res < 32; res++)
- if (ext2_test_bit(res, p))
- break;
- return (p - addr) * 32 + res;
-}
-
-static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
- unsigned offset)
-{
- const unsigned long *addr = vaddr;
- const unsigned long *p = addr + (offset >> 5);
- int bit = offset & 31UL, res;
-
- if (offset >= size)
- return size;
-
- if (bit) {
- /* Look for one in first longword */
- for (res = bit; res < 32; res++)
- if (ext2_test_bit(res, p))
- return (p - addr) * 32 + res;
- p++;
- }
- /* No set bit yet, search remaining full bytes for a set bit */
- res = ext2_find_first_bit(p, size - 32 * (p - addr));
- return (p - addr) * 32 + res;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_BITOPS_H */
+++ /dev/null
-/*
-** asm/blinken.h -- m68k blinkenlights support (currently hp300 only)
-**
-** (c) 1998 Phil Blundell <philb@gnu.org>
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _M68K_BLINKEN_H
-#define _M68K_BLINKEN_H
-
-#include <asm/setup.h>
-#include <asm/io.h>
-
-#define HP300_LEDS 0xf001ffff
-
-extern unsigned char ledstate;
-
-static __inline__ void blinken_leds(int on, int off)
-{
- if (MACH_IS_HP300)
- {
- ledstate |= on;
- ledstate &= ~off;
- out_8(HP300_LEDS, ~ledstate);
- }
-}
-
-#endif
+++ /dev/null
-/*
-** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 09/29/92 by Greg Harp
-**
-** 5/2/94 Roman Hodek:
-** Added bi_atari part of the machine dependent union bi_un; for now it
-** contains just a model field to distinguish between TT and Falcon.
-** 26/7/96 Roman Zippel:
-** Renamed to setup.h; added some useful macros to allow gcc some
-** optimizations if possible.
-** 5/10/96 Geert Uytterhoeven:
-** Redesign of the boot information structure; renamed to bootinfo.h again
-** 27/11/96 Geert Uytterhoeven:
-** Backwards compatibility with bootinfo interface version 1.0
-*/
-
-#ifndef _M68K_BOOTINFO_H
-#define _M68K_BOOTINFO_H
-
-
- /*
- * Bootinfo definitions
- *
- * This is an easily parsable and extendable structure containing all
- * information to be passed from the bootstrap to the kernel.
- *
- * This way I hope to keep all future changes back/forewards compatible.
- * Thus, keep your fingers crossed...
- *
- * This structure is copied right after the kernel bss by the bootstrap
- * routine.
- */
-
-#ifndef __ASSEMBLY__
-
-struct bi_record {
- unsigned short tag; /* tag ID */
- unsigned short size; /* size of record (in bytes) */
- unsigned long data[0]; /* data */
-};
-
-#endif /* __ASSEMBLY__ */
-
-
- /*
- * Tag Definitions
- *
- * Machine independent tags start counting from 0x0000
- * Machine dependent tags start counting from 0x8000
- */
-
-#define BI_LAST 0x0000 /* last record (sentinel) */
-#define BI_MACHTYPE 0x0001 /* machine type (u_long) */
-#define BI_CPUTYPE 0x0002 /* cpu type (u_long) */
-#define BI_FPUTYPE 0x0003 /* fpu type (u_long) */
-#define BI_MMUTYPE 0x0004 /* mmu type (u_long) */
-#define BI_MEMCHUNK 0x0005 /* memory chunk address and size */
- /* (struct mem_info) */
-#define BI_RAMDISK 0x0006 /* ramdisk address and size */
- /* (struct mem_info) */
-#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */
- /* (string) */
-
- /*
- * Amiga-specific tags
- */
-
-#define BI_AMIGA_MODEL 0x8000 /* model (u_long) */
-#define BI_AMIGA_AUTOCON 0x8001 /* AutoConfig device */
- /* (struct ConfigDev) */
-#define BI_AMIGA_CHIP_SIZE 0x8002 /* size of Chip RAM (u_long) */
-#define BI_AMIGA_VBLANK 0x8003 /* VBLANK frequency (u_char) */
-#define BI_AMIGA_PSFREQ 0x8004 /* power supply frequency (u_char) */
-#define BI_AMIGA_ECLOCK 0x8005 /* EClock frequency (u_long) */
-#define BI_AMIGA_CHIPSET 0x8006 /* native chipset present (u_long) */
-#define BI_AMIGA_SERPER 0x8007 /* serial port period (u_short) */
-
- /*
- * Atari-specific tags
- */
-
-#define BI_ATARI_MCH_COOKIE 0x8000 /* _MCH cookie from TOS (u_long) */
-#define BI_ATARI_MCH_TYPE 0x8001 /* special machine type (u_long) */
- /* (values are ATARI_MACH_* defines */
-
-/* mch_cookie values (upper word) */
-#define ATARI_MCH_ST 0
-#define ATARI_MCH_STE 1
-#define ATARI_MCH_TT 2
-#define ATARI_MCH_FALCON 3
-
-/* mch_type values */
-#define ATARI_MACH_NORMAL 0 /* no special machine type */
-#define ATARI_MACH_MEDUSA 1 /* Medusa 040 */
-#define ATARI_MACH_HADES 2 /* Hades 040 or 060 */
-#define ATARI_MACH_AB40 3 /* Afterburner040 on Falcon */
-
- /*
- * VME-specific tags
- */
-
-#define BI_VME_TYPE 0x8000 /* VME sub-architecture (u_long) */
-#define BI_VME_BRDINFO 0x8001 /* VME board information (struct) */
-
-/* BI_VME_TYPE codes */
-#define VME_TYPE_TP34V 0x0034 /* Tadpole TP34V */
-#define VME_TYPE_MVME147 0x0147 /* Motorola MVME147 */
-#define VME_TYPE_MVME162 0x0162 /* Motorola MVME162 */
-#define VME_TYPE_MVME166 0x0166 /* Motorola MVME166 */
-#define VME_TYPE_MVME167 0x0167 /* Motorola MVME167 */
-#define VME_TYPE_MVME172 0x0172 /* Motorola MVME172 */
-#define VME_TYPE_MVME177 0x0177 /* Motorola MVME177 */
-#define VME_TYPE_BVME4000 0x4000 /* BVM Ltd. BVME4000 */
-#define VME_TYPE_BVME6000 0x6000 /* BVM Ltd. BVME6000 */
-
-/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on
- * Motorola VME boards. Contains board number, Bug version, board
- * configuration options, etc. See include/asm/mvme16xhw.h for details.
- */
-
-
- /*
- * Macintosh-specific tags (all u_long)
- */
-
-#define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */
-#define BI_MAC_VADDR 0x8001 /* Mac video base address */
-#define BI_MAC_VDEPTH 0x8002 /* Mac video depth */
-#define BI_MAC_VROW 0x8003 /* Mac video rowbytes */
-#define BI_MAC_VDIM 0x8004 /* Mac video dimensions */
-#define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */
-#define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */
-#define BI_MAC_BTIME 0x8007 /* Mac boot time */
-#define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */
-#define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */
-#define BI_MAC_CPUID 0x800a /* Mac CPU type (sanity check) */
-#define BI_MAC_ROMBASE 0x800b /* Mac system ROM base address */
-
- /*
- * Macintosh hardware profile data - unused, see macintosh.h for
- * resonable type values
- */
-
-#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */
-#define BI_MAC_VIA2BASE 0x8011 /* Mac VIA2 base address (type varies) */
-#define BI_MAC_VIA2TYPE 0x8012 /* Mac VIA2 type (VIA, RBV, OSS) */
-#define BI_MAC_ADBTYPE 0x8013 /* Mac ADB interface type */
-#define BI_MAC_ASCBASE 0x8014 /* Mac Apple Sound Chip base address */
-#define BI_MAC_SCSI5380 0x8015 /* Mac NCR 5380 SCSI (base address, multi) */
-#define BI_MAC_SCSIDMA 0x8016 /* Mac SCSI DMA (base address) */
-#define BI_MAC_SCSI5396 0x8017 /* Mac NCR 53C96 SCSI (base address, multi) */
-#define BI_MAC_IDETYPE 0x8018 /* Mac IDE interface type */
-#define BI_MAC_IDEBASE 0x8019 /* Mac IDE interface base address */
-#define BI_MAC_NUBUS 0x801a /* Mac Nubus type (none, regular, pseudo) */
-#define BI_MAC_SLOTMASK 0x801b /* Mac Nubus slots present */
-#define BI_MAC_SCCTYPE 0x801c /* Mac SCC serial type (normal, IOP) */
-#define BI_MAC_ETHTYPE 0x801d /* Mac builtin ethernet type (Sonic, MACE */
-#define BI_MAC_ETHBASE 0x801e /* Mac builtin ethernet base address */
-#define BI_MAC_PMU 0x801f /* Mac power management / poweroff hardware */
-#define BI_MAC_IOP_SWIM 0x8020 /* Mac SWIM floppy IOP */
-#define BI_MAC_IOP_ADB 0x8021 /* Mac ADB IOP */
-
- /*
- * Mac: compatibility with old booter data format (temporarily)
- * Fields unused with the new bootinfo can be deleted now; instead of
- * adding new fields the struct might be splitted into a hardware address
- * part and a hardware type part
- */
-
-#ifndef __ASSEMBLY__
-
-struct mac_booter_data
-{
- unsigned long videoaddr;
- unsigned long videorow;
- unsigned long videodepth;
- unsigned long dimensions;
- unsigned long args;
- unsigned long boottime;
- unsigned long gmtbias;
- unsigned long bootver;
- unsigned long videological;
- unsigned long sccbase;
- unsigned long id;
- unsigned long memsize;
- unsigned long serialmf;
- unsigned long serialhsk;
- unsigned long serialgpi;
- unsigned long printmf;
- unsigned long printhsk;
- unsigned long printgpi;
- unsigned long cpuid;
- unsigned long rombase;
- unsigned long adbdelay;
- unsigned long timedbra;
-};
-
-extern struct mac_booter_data
- mac_bi_data;
-
-#endif
-
- /*
- * Apollo-specific tags
- */
-
-#define BI_APOLLO_MODEL 0x8000 /* model (u_long) */
-
- /*
- * HP300-specific tags
- */
-
-#define BI_HP300_MODEL 0x8000 /* model (u_long) */
-#define BI_HP300_UART_SCODE 0x8001 /* UART select code (u_long) */
-#define BI_HP300_UART_ADDR 0x8002 /* phys. addr of UART (u_long) */
-
- /*
- * Stuff for bootinfo interface versioning
- *
- * At the start of kernel code, a 'struct bootversion' is located.
- * bootstrap checks for a matching version of the interface before booting
- * a kernel, to avoid user confusion if kernel and bootstrap don't work
- * together :-)
- *
- * If incompatible changes are made to the bootinfo interface, the major
- * number below should be stepped (and the minor reset to 0) for the
- * appropriate machine. If a change is backward-compatible, the minor
- * should be stepped. "Backwards-compatible" means that booting will work,
- * but certain features may not.
- */
-
-#define BOOTINFOV_MAGIC 0x4249561A /* 'BIV^Z' */
-#define MK_BI_VERSION(major,minor) (((major)<<16)+(minor))
-#define BI_VERSION_MAJOR(v) (((v) >> 16) & 0xffff)
-#define BI_VERSION_MINOR(v) ((v) & 0xffff)
-
-#ifndef __ASSEMBLY__
-
-struct bootversion {
- unsigned short branch;
- unsigned long magic;
- struct {
- unsigned long machtype;
- unsigned long version;
- } machversions[0];
-};
-
-#endif /* __ASSEMBLY__ */
-
-#define AMIGA_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define ATARI_BOOTI_VERSION MK_BI_VERSION( 2, 1 )
-#define MAC_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define MVME147_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define MVME16x_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define Q40_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define HP300_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-
-#ifdef BOOTINFO_COMPAT_1_0
-
- /*
- * Backwards compatibility with bootinfo interface version 1.0
- */
-
-#define COMPAT_AMIGA_BOOTI_VERSION MK_BI_VERSION( 1, 0 )
-#define COMPAT_ATARI_BOOTI_VERSION MK_BI_VERSION( 1, 0 )
-#define COMPAT_MAC_BOOTI_VERSION MK_BI_VERSION( 1, 0 )
-
-#include <linux/zorro.h>
-
-#define COMPAT_NUM_AUTO 16
-
-struct compat_bi_Amiga {
- int model;
- int num_autocon;
- struct ConfigDev autocon[COMPAT_NUM_AUTO];
- unsigned long chip_size;
- unsigned char vblank;
- unsigned char psfreq;
- unsigned long eclock;
- unsigned long chipset;
- unsigned long hw_present;
-};
-
-struct compat_bi_Atari {
- unsigned long hw_present;
- unsigned long mch_cookie;
-};
-
-#ifndef __ASSEMBLY__
-
-struct compat_bi_Macintosh
-{
- unsigned long videoaddr;
- unsigned long videorow;
- unsigned long videodepth;
- unsigned long dimensions;
- unsigned long args;
- unsigned long boottime;
- unsigned long gmtbias;
- unsigned long bootver;
- unsigned long videological;
- unsigned long sccbase;
- unsigned long id;
- unsigned long memsize;
- unsigned long serialmf;
- unsigned long serialhsk;
- unsigned long serialgpi;
- unsigned long printmf;
- unsigned long printhsk;
- unsigned long printgpi;
- unsigned long cpuid;
- unsigned long rombase;
- unsigned long adbdelay;
- unsigned long timedbra;
-};
-
-#endif
-
-struct compat_mem_info {
- unsigned long addr;
- unsigned long size;
-};
-
-#define COMPAT_NUM_MEMINFO 4
-
-#define COMPAT_CPUB_68020 0
-#define COMPAT_CPUB_68030 1
-#define COMPAT_CPUB_68040 2
-#define COMPAT_CPUB_68060 3
-#define COMPAT_FPUB_68881 5
-#define COMPAT_FPUB_68882 6
-#define COMPAT_FPUB_68040 7
-#define COMPAT_FPUB_68060 8
-
-#define COMPAT_CPU_68020 (1<<COMPAT_CPUB_68020)
-#define COMPAT_CPU_68030 (1<<COMPAT_CPUB_68030)
-#define COMPAT_CPU_68040 (1<<COMPAT_CPUB_68040)
-#define COMPAT_CPU_68060 (1<<COMPAT_CPUB_68060)
-#define COMPAT_CPU_MASK (31)
-#define COMPAT_FPU_68881 (1<<COMPAT_FPUB_68881)
-#define COMPAT_FPU_68882 (1<<COMPAT_FPUB_68882)
-#define COMPAT_FPU_68040 (1<<COMPAT_FPUB_68040)
-#define COMPAT_FPU_68060 (1<<COMPAT_FPUB_68060)
-#define COMPAT_FPU_MASK (0xfe0)
-
-#define COMPAT_CL_SIZE (256)
-
-struct compat_bootinfo {
- unsigned long machtype;
- unsigned long cputype;
- struct compat_mem_info memory[COMPAT_NUM_MEMINFO];
- int num_memory;
- unsigned long ramdisk_size;
- unsigned long ramdisk_addr;
- char command_line[COMPAT_CL_SIZE];
- union {
- struct compat_bi_Amiga bi_ami;
- struct compat_bi_Atari bi_ata;
- struct compat_bi_Macintosh bi_mac;
- } bi_un;
-};
-
-#define bi_amiga bi_un.bi_ami
-#define bi_atari bi_un.bi_ata
-#define bi_mac bi_un.bi_mac
-
-#endif /* BOOTINFO_COMPAT_1_0 */
-
-
-#endif /* _M68K_BOOTINFO_H */
+++ /dev/null
-#ifndef _M68K_BUG_H
-#define _M68K_BUG_H
-
-
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#ifndef CONFIG_SUN3
-#define BUG() do { \
- printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- __builtin_trap(); \
-} while (0)
-#else
-#define BUG() do { \
- printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- panic("BUG!"); \
-} while (0)
-#endif
-#else
-#define BUG() do { \
- __builtin_trap(); \
-} while (0)
-#endif
-
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
+++ /dev/null
-/*
- * include/asm-m68k/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-extern void check_bugs(void); /* in arch/m68k/kernel/setup.c */
+++ /dev/null
-#ifndef _M68K_BVME6000HW_H_
-#define _M68K_BVME6000HW_H_
-
-#include <asm/irq.h>
-
-/*
- * PIT structure
- */
-
-#define BVME_PIT_BASE 0xffa00000
-
-typedef struct {
- unsigned char
- pad_a[3], pgcr,
- pad_b[3], psrr,
- pad_c[3], paddr,
- pad_d[3], pbddr,
- pad_e[3], pcddr,
- pad_f[3], pivr,
- pad_g[3], pacr,
- pad_h[3], pbcr,
- pad_i[3], padr,
- pad_j[3], pbdr,
- pad_k[3], paar,
- pad_l[3], pbar,
- pad_m[3], pcdr,
- pad_n[3], psr,
- pad_o[3], res1,
- pad_p[3], res2,
- pad_q[3], tcr,
- pad_r[3], tivr,
- pad_s[3], res3,
- pad_t[3], cprh,
- pad_u[3], cprm,
- pad_v[3], cprl,
- pad_w[3], res4,
- pad_x[3], crh,
- pad_y[3], crm,
- pad_z[3], crl,
- pad_A[3], tsr,
- pad_B[3], res5;
-} PitRegs_t, *PitRegsPtr;
-
-#define bvmepit ((*(volatile PitRegsPtr)(BVME_PIT_BASE)))
-
-#define BVME_RTC_BASE 0xff900000
-
-typedef struct {
- unsigned char
- pad_a[3], msr,
- pad_b[3], t0cr_rtmr,
- pad_c[3], t1cr_omr,
- pad_d[3], pfr_icr0,
- pad_e[3], irr_icr1,
- pad_f[3], bcd_tenms,
- pad_g[3], bcd_sec,
- pad_h[3], bcd_min,
- pad_i[3], bcd_hr,
- pad_j[3], bcd_dom,
- pad_k[3], bcd_mth,
- pad_l[3], bcd_year,
- pad_m[3], bcd_ujcc,
- pad_n[3], bcd_hjcc,
- pad_o[3], bcd_dow,
- pad_p[3], t0lsb,
- pad_q[3], t0msb,
- pad_r[3], t1lsb,
- pad_s[3], t1msb,
- pad_t[3], cmp_sec,
- pad_u[3], cmp_min,
- pad_v[3], cmp_hr,
- pad_w[3], cmp_dom,
- pad_x[3], cmp_mth,
- pad_y[3], cmp_dow,
- pad_z[3], sav_sec,
- pad_A[3], sav_min,
- pad_B[3], sav_hr,
- pad_C[3], sav_dom,
- pad_D[3], sav_mth,
- pad_E[3], ram,
- pad_F[3], test;
-} RtcRegs_t, *RtcPtr_t;
-
-
-#define BVME_I596_BASE 0xff100000
-
-#define BVME_ETHIRQ_REG 0xff20000b
-
-#define BVME_LOCAL_IRQ_STAT 0xff20000f
-
-#define BVME_ETHERR 0x02
-#define BVME_ABORT_STATUS 0x08
-
-#define BVME_NCR53C710_BASE 0xff000000
-
-#define BVME_SCC_A_ADDR 0xffb0000b
-#define BVME_SCC_B_ADDR 0xffb00003
-#define BVME_SCC_RTxC 7372800
-
-#define BVME_CONFIG_REG 0xff500003
-
-#define config_reg_ptr (volatile unsigned char *)BVME_CONFIG_REG
-
-#define BVME_CONFIG_SW1 0x08
-#define BVME_CONFIG_SW2 0x04
-#define BVME_CONFIG_SW3 0x02
-#define BVME_CONFIG_SW4 0x01
-
-
-#define BVME_IRQ_TYPE_PRIO 0
-
-#define BVME_IRQ_PRN (IRQ_USER+20)
-#define BVME_IRQ_TIMER (IRQ_USER+25)
-#define BVME_IRQ_I596 IRQ_AUTO_2
-#define BVME_IRQ_SCSI IRQ_AUTO_3
-#define BVME_IRQ_RTC IRQ_AUTO_6
-#define BVME_IRQ_ABORT IRQ_AUTO_7
-
-/* SCC interrupts */
-#define BVME_IRQ_SCC_BASE IRQ_USER
-#define BVME_IRQ_SCCB_TX IRQ_USER
-#define BVME_IRQ_SCCB_STAT (IRQ_USER+2)
-#define BVME_IRQ_SCCB_RX (IRQ_USER+4)
-#define BVME_IRQ_SCCB_SPCOND (IRQ_USER+6)
-#define BVME_IRQ_SCCA_TX (IRQ_USER+8)
-#define BVME_IRQ_SCCA_STAT (IRQ_USER+10)
-#define BVME_IRQ_SCCA_RX (IRQ_USER+12)
-#define BVME_IRQ_SCCA_SPCOND (IRQ_USER+14)
-
-/* Address control registers */
-
-#define BVME_ACR_A32VBA 0xff400003
-#define BVME_ACR_A32MSK 0xff410003
-#define BVME_ACR_A24VBA 0xff420003
-#define BVME_ACR_A24MSK 0xff430003
-#define BVME_ACR_A16VBA 0xff440003
-#define BVME_ACR_A32LBA 0xff450003
-#define BVME_ACR_A24LBA 0xff460003
-#define BVME_ACR_ADDRCTL 0xff470003
-
-#define bvme_acr_a32vba *(volatile unsigned char *)BVME_ACR_A32VBA
-#define bvme_acr_a32msk *(volatile unsigned char *)BVME_ACR_A32MSK
-#define bvme_acr_a24vba *(volatile unsigned char *)BVME_ACR_A24VBA
-#define bvme_acr_a24msk *(volatile unsigned char *)BVME_ACR_A24MSK
-#define bvme_acr_a16vba *(volatile unsigned char *)BVME_ACR_A16VBA
-#define bvme_acr_a32lba *(volatile unsigned char *)BVME_ACR_A32LBA
-#define bvme_acr_a24lba *(volatile unsigned char *)BVME_ACR_A24LBA
-#define bvme_acr_addrctl *(volatile unsigned char *)BVME_ACR_ADDRCTL
-
-#endif
+++ /dev/null
-#ifndef _M68K_BYTEORDER_H
-#define _M68K_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68K_BYTEORDER_H */
+++ /dev/null
-/*
- * include/asm-m68k/cache.h
- */
-#ifndef __ARCH_M68K_CACHE_H
-#define __ARCH_M68K_CACHE_H
-
-/* bytes per L1 cache line */
-#define L1_CACHE_SHIFT 4
-#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT)
-
-#endif
+++ /dev/null
-#ifndef _M68K_CACHECTL_H
-#define _M68K_CACHECTL_H
-
-/* Definitions for the cacheflush system call. */
-
-#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */
-#define FLUSH_SCOPE_PAGE 2 /* Flush a page */
-#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */
-
-#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */
-#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */
-#define FLUSH_CACHE_BOTH 3 /* Flush both caches */
-
-#endif /* _M68K_CACHECTL_H */
+++ /dev/null
-#ifndef _M68K_CACHEFLUSH_H
-#define _M68K_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-/* cache code */
-#define FLUSH_I_AND_D (0x00000808)
-#define FLUSH_I (0x00000008)
-
-/*
- * Cache handling functions
- */
-
-static inline void flush_icache(void)
-{
- if (CPU_IS_040_OR_060)
- asm volatile ( "nop\n"
- " .chip 68040\n"
- " cpusha %bc\n"
- " .chip 68k");
- else {
- unsigned long tmp;
- asm volatile ( "movec %%cacr,%0\n"
- " or.w %1,%0\n"
- " movec %0,%%cacr"
- : "=&d" (tmp)
- : "id" (FLUSH_I));
- }
-}
-
-/*
- * invalidate the cache for the specified memory range.
- * It starts at the physical address specified for
- * the given number of bytes.
- */
-extern void cache_clear(unsigned long paddr, int len);
-/*
- * push any dirty cache in the specified memory range.
- * It starts at the physical address specified for
- * the given number of bytes.
- */
-extern void cache_push(unsigned long paddr, int len);
-
-/*
- * push and invalidate pages in the specified user virtual
- * memory range.
- */
-extern void cache_push_v(unsigned long vaddr, int len);
-
-/* This is needed whenever the virtual mapping of the current
- process changes. */
-#define __flush_cache_all() \
-({ \
- if (CPU_IS_040_OR_060) \
- __asm__ __volatile__("nop\n\t" \
- ".chip 68040\n\t" \
- "cpusha %dc\n\t" \
- ".chip 68k"); \
- else { \
- unsigned long _tmp; \
- __asm__ __volatile__("movec %%cacr,%0\n\t" \
- "orw %1,%0\n\t" \
- "movec %0,%%cacr" \
- : "=&d" (_tmp) \
- : "di" (FLUSH_I_AND_D)); \
- } \
-})
-
-#define __flush_cache_030() \
-({ \
- if (CPU_IS_020_OR_030) { \
- unsigned long _tmp; \
- __asm__ __volatile__("movec %%cacr,%0\n\t" \
- "orw %1,%0\n\t" \
- "movec %0,%%cacr" \
- : "=&d" (_tmp) \
- : "di" (FLUSH_I_AND_D)); \
- } \
-})
-
-#define flush_cache_all() __flush_cache_all()
-
-#define flush_cache_vmap(start, end) flush_cache_all()
-#define flush_cache_vunmap(start, end) flush_cache_all()
-
-static inline void flush_cache_mm(struct mm_struct *mm)
-{
- if (mm == current->mm)
- __flush_cache_030();
-}
-
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-
-/* flush_cache_range/flush_cache_page must be macros to avoid
- a dependency on linux/mm.h, which includes this file... */
-static inline void flush_cache_range(struct vm_area_struct *vma,
- unsigned long start,
- unsigned long end)
-{
- if (vma->vm_mm == current->mm)
- __flush_cache_030();
-}
-
-static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
-{
- if (vma->vm_mm == current->mm)
- __flush_cache_030();
-}
-
-
-/* Push the page at kernel virtual address and clear the icache */
-/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-static inline void __flush_page_to_ram(void *vaddr)
-{
- if (CPU_IS_040_OR_060) {
- __asm__ __volatile__("nop\n\t"
- ".chip 68040\n\t"
- "cpushp %%bc,(%0)\n\t"
- ".chip 68k"
- : : "a" (__pa(vaddr)));
- } else {
- unsigned long _tmp;
- __asm__ __volatile__("movec %%cacr,%0\n\t"
- "orw %1,%0\n\t"
- "movec %0,%%cacr"
- : "=&d" (_tmp)
- : "di" (FLUSH_I));
- }
-}
-
-#define flush_dcache_page(page) __flush_page_to_ram(page_address(page))
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page))
-
-extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
- unsigned long addr, int len);
-extern void flush_icache_range(unsigned long address, unsigned long endaddr);
-
-static inline void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr,
- void *dst, void *src, int len)
-{
- flush_cache_page(vma, vaddr, page_to_pfn(page));
- memcpy(dst, src, len);
- flush_icache_user_range(vma, page, vaddr, len);
-}
-static inline void copy_from_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr,
- void *dst, void *src, int len)
-{
- flush_cache_page(vma, vaddr, page_to_pfn(page));
- memcpy(dst, src, len);
-}
-
-#endif /* _M68K_CACHEFLUSH_H */
+++ /dev/null
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
- void *dst,
- int len, __wsum sum,
- int *csum_err);
-
-extern __wsum csum_partial_copy_nocheck(const void *src,
- void *dst, int len,
- __wsum sum);
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- unsigned int sum = 0;
- unsigned long tmp;
-
- __asm__ ("subqw #1,%2\n"
- "1:\t"
- "movel %1@+,%3\n\t"
- "addxl %3,%0\n\t"
- "dbra %2,1b\n\t"
- "movel %0,%3\n\t"
- "swap %3\n\t"
- "addxw %3,%0\n\t"
- "clrw %3\n\t"
- "addxw %3,%0\n\t"
- : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
- : "0" (sum), "1" (iph), "2" (ihl)
- : "memory");
- return (__force __sum16)~sum;
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp = (__force u32)sum;
- __asm__("swap %1\n\t"
- "addw %1, %0\n\t"
- "clrw %1\n\t"
- "addxw %1, %0"
- : "=&d" (sum), "=&d" (tmp)
- : "0" (sum), "1" (tmp));
- return (__force __sum16)~sum;
-}
-
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("addl %2,%0\n\t"
- "addxl %3,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=d" (saddr)
- : "g" (daddr), "1" (saddr), "d" (len + proto),
- "0" (sum));
- return sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- register unsigned long tmp;
- __asm__("addl %2@,%0\n\t"
- "movel %2@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@,%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (tmp)
- : "a" (saddr), "a" (daddr), "d" (len + proto),
- "0" (sum));
-
- return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
+++ /dev/null
-#ifndef _M68K_CONTREGS_H
-#define _M68K_CONTREGS_H
-
-/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address
- * space. These are for the mmu's context register, etc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* 3=sun3
- 4=sun4 (as in sun4 sysmaint student book)
- c=sun4c (according to davem) */
-
-#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */
-#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */
-#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */
-#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */
-#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/
-#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */
-#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */
-#define AC_SYNC_ERR 0x60000000 /* c fault type */
-#define AC_SYNC_VA 0x60000004 /* c fault virtual address */
-#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */
-#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */
-#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */
-#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */
-#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */
-#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */
-#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */
-#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/
-
-/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */
-#define AC_M_PCR 0x0000 /* shv Processor Control Reg */
-#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */
-#define AC_M_CXR 0x0200 /* shv Context Register */
-#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */
-#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */
-#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */
-#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */
-#define AC_M_RESET 0x0700 /* hv Reset Reg */
-#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */
-#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */
-#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */
-#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */
-#define AC_M_ITR 0x1300 /* hv Index Tag Register */
-#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */
-#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */
-#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */
-#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */
-#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */
-#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */
-
-#endif /* _M68K_CONTREGS_H */
+++ /dev/null
-#ifndef __M68K_CPUTIME_H
-#define __M68K_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68K_CPUTIME_H */
+++ /dev/null
-#ifndef _M68K_CURRENT_H
-#define _M68K_CURRENT_H
-
-register struct task_struct *current __asm__("%a2");
-
-#endif /* !(_M68K_CURRENT_H) */
+++ /dev/null
-#ifndef _M68K_DELAY_H
-#define _M68K_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright (C) 1994 Hamish Macdonald
- *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- */
-
-static inline void __delay(unsigned long loops)
-{
- __asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
- : "=d" (loops) : "0" (loops));
-}
-
-extern void __bad_udelay(void);
-
-/*
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-static inline void __const_udelay(unsigned long xloops)
-{
- unsigned long tmp;
-
- __asm__ ("mulul %2,%0:%1"
- : "=d" (xloops), "=d" (tmp)
- : "d" (xloops), "1" (loops_per_jiffy));
- __delay(xloops * HZ);
-}
-
-static inline void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 4295); /* 2**32 / 1000000 */
-}
-
-#define udelay(n) (__builtin_constant_p(n) ? \
- ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \
- __udelay(n))
-
-static inline unsigned long muldiv(unsigned long a, unsigned long b,
- unsigned long c)
-{
- unsigned long tmp;
-
- __asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
- : "=d" (tmp), "=d" (a)
- : "d" (b), "d" (c), "1" (a));
- return a;
-}
-
-#endif /* defined(_M68K_DELAY_H) */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#ifndef _M68K_DIV64_H
-#define _M68K_DIV64_H
-
-#include <linux/types.h>
-
-/* n = n / base; return rem; */
-
-#define do_div(n, base) ({ \
- union { \
- unsigned long n32[2]; \
- unsigned long long n64; \
- } __n; \
- unsigned long __rem, __upper; \
- \
- __n.n64 = (n); \
- if ((__upper = __n.n32[0])) { \
- asm ("divul.l %2,%1:%0" \
- : "=d" (__n.n32[0]), "=d" (__upper) \
- : "d" (base), "0" (__n.n32[0])); \
- } \
- asm ("divu.l %2,%1:%0" \
- : "=d" (__n.n32[1]), "=d" (__rem) \
- : "d" (base), "1" (__upper), "0" (__n.n32[1])); \
- (n) = __n.n64; \
- __rem; \
-})
-
-#endif /* _M68K_DIV64_H */
+++ /dev/null
-#ifndef _M68K_DMA_MAPPING_H
-#define _M68K_DMA_MAPPING_H
-
-#include <asm/cache.h>
-
-struct scatterlist;
-
-#ifndef CONFIG_MMU_SUN3
-static inline int dma_supported(struct device *dev, u64 mask)
-{
- return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
- return 0;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
- return 1 << L1_CACHE_SHIFT;
-}
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
-extern void *dma_alloc_coherent(struct device *, size_t,
- dma_addr_t *, gfp_t);
-extern void dma_free_coherent(struct device *, size_t,
- void *, dma_addr_t);
-
-static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t *handle, gfp_t flag)
-{
- return dma_alloc_coherent(dev, size, handle, flag);
-}
-static inline void dma_free_noncoherent(struct device *dev, size_t size,
- void *addr, dma_addr_t handle)
-{
- dma_free_coherent(dev, size, addr, handle);
-}
-static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- enum dma_data_direction dir)
-{
- /* we use coherent allocation, so not much to do here. */
-}
-
-extern dma_addr_t dma_map_single(struct device *, void *, size_t,
- enum dma_data_direction);
-static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
- size_t size, enum dma_data_direction dir)
-{
-}
-
-extern dma_addr_t dma_map_page(struct device *, struct page *,
- unsigned long, size_t size,
- enum dma_data_direction);
-static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
- size_t size, enum dma_data_direction dir)
-{
-}
-
-extern int dma_map_sg(struct device *, struct scatterlist *, int,
- enum dma_data_direction);
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries, enum dma_data_direction dir)
-{
-}
-
-extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
- enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
- enum dma_data_direction);
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- /* just sync everything for now */
- dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
- size_t size, enum dma_data_direction dir)
-{
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
-{
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- /* just sync everything for now */
- dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
-{
- return 0;
-}
-
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif /* _M68K_DMA_MAPPING_H */
+++ /dev/null
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-
-/* it's useless on the m68k, but unfortunately needed by the new
- bootmem allocator (but this should do it for this) */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#define isa_dma_bridge_buggy (0)
-
-#endif /* _M68K_DMA_H */
+++ /dev/null
-/*
- * linux/include/asm-m68k/dsp56k.h - defines and declarations for
- * DSP56k device driver
- *
- * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-
-/* Used for uploading DSP binary code */
-struct dsp56k_upload {
- int len;
- char __user *bin;
-};
-
-/* For the DSP host flags */
-struct dsp56k_host_flags {
- int dir; /* Bit field. 1 = write output bit, 0 = do nothing.
- * 0x0000 means reading only, 0x0011 means
- * writing the bits stored in `out' on HF0 and HF1.
- * Note that HF2 and HF3 can only be read.
- */
- int out; /* Bit field like above. */
- int status; /* Host register's current state is returned */
-};
-
-/* ioctl command codes */
-#define DSP56K_UPLOAD 1 /* Upload DSP binary program */
-#define DSP56K_SET_TX_WSIZE 2 /* Host transmit word size (1-4) */
-#define DSP56K_SET_RX_WSIZE 3 /* Host receive word size (1-4) */
-#define DSP56K_HOST_FLAGS 4 /* Host flag registers */
-#define DSP56K_HOST_CMD 5 /* Trig Host Command (0-31) */
+++ /dev/null
-/*
- * include/asm-m68k/dma.h
- *
- * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
- *
- * Hacked to fit Sun3x needs by Thomas Bogendoerfer
- */
-
-#ifndef __M68K_DVMA_H
-#define __M68K_DVMA_H
-
-
-#define DVMA_PAGE_SHIFT 13
-#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT)
-#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1))
-#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE)
-
-extern void dvma_init(void);
-extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
- int len);
-
-#define dvma_malloc(x) dvma_malloc_align(x, 0)
-#define dvma_map(x, y) dvma_map_align(x, y, 0)
-#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff)
-#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff)
-extern unsigned long dvma_map_align(unsigned long kaddr, int len,
- int align);
-extern void *dvma_malloc_align(unsigned long len, unsigned long align);
-
-extern void dvma_unmap(void *baddr);
-extern void dvma_free(void *vaddr);
-
-
-#ifdef CONFIG_SUN3
-/* sun3 dvma page support */
-
-/* memory and pmegs potentially reserved for dvma */
-#define DVMA_PMEG_START 10
-#define DVMA_PMEG_END 16
-#define DVMA_START 0xf00000
-#define DVMA_END 0xfe0000
-#define DVMA_SIZE (DVMA_END-DVMA_START)
-#define IOMMU_TOTAL_ENTRIES 128
-#define IOMMU_ENTRIES 120
-
-/* empirical kludge -- dvma regions only seem to work right on 0x10000
- byte boundaries */
-#define DVMA_REGION_SIZE 0x10000
-#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \
- ~(DVMA_REGION_SIZE-1))
-
-/* virt <-> phys conversions */
-#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff)
-#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000)
-#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff)
-#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000)
-#define dvma_vtob(x) dvma_vtop(x)
-#define dvma_btov(x) dvma_ptov(x)
-
-static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
- int len)
-{
- return 0;
-}
-
-#else /* Sun3x */
-
-/* sun3x dvma page support */
-
-#define DVMA_START 0x0
-#define DVMA_END 0xf00000
-#define DVMA_SIZE (DVMA_END-DVMA_START)
-#define IOMMU_TOTAL_ENTRIES 2048
-/* the prom takes the top meg */
-#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80)
-
-#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff)
-#define dvma_btov(x) ((unsigned long)(x) | 0xff000000)
-
-extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len);
-
-
-
-/* everything below this line is specific to dma used for the onboard
- ESP scsi on sun3x */
-
-/* Structure to describe the current status of DMA registers on the Sparc */
-struct sparc_dma_registers {
- __volatile__ unsigned long cond_reg; /* DMA condition register */
- __volatile__ unsigned long st_addr; /* Start address of this transfer */
- __volatile__ unsigned long cnt; /* How many bytes to transfer */
- __volatile__ unsigned long dma_test; /* DMA test register */
-};
-
-/* DVMA chip revisions */
-enum dvma_rev {
- dvmarev0,
- dvmaesc1,
- dvmarev1,
- dvmarev2,
- dvmarev3,
- dvmarevplus,
- dvmahme
-};
-
-#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct Linux_SBus_DMA {
- struct Linux_SBus_DMA *next;
- struct linux_sbus_device *SBus_dev;
- struct sparc_dma_registers *regs;
-
- /* Status, misc info */
- int node; /* Prom node for this DMA device */
- int running; /* Are we doing DMA now? */
- int allocated; /* Are we "owned" by anyone yet? */
-
- /* Transfer information. */
- unsigned long addr; /* Start address of current transfer */
- int nbytes; /* Size of current transfer */
- int realbytes; /* For splitting up large transfers, etc. */
-
- /* DMA revision */
- enum dvma_rev revision;
-};
-
-extern struct Linux_SBus_DMA *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
-#define DMA_VERS0 0x00000000 /* Sunray DMA version */
-#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
-#define DMA_VERS1 0x80000000 /* DMA rev 1 */
-#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
-#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
-#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
-#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
-#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
-#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
-#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
-#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
-#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
-#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
-#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
-#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */
-#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
-#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
-#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
-#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
-#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
-#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1 0x01
-#define DMA_BURST2 0x02
-#define DMA_BURST4 0x04
-#define DMA_BURST8 0x08
-#define DMA_BURST16 0x10
-#define DMA_BURST32 0x20
-#define DMA_BURST64 0x40
-#define DMA_BURSTBITS 0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
-#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
-#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
-#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
-#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
-#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
-#define DMA_BEGINDMA_W(regs) \
- ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
-#define DMA_BEGINDMA_R(regs) \
- ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done. So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler. You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
- if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
- } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
- if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
- } while(0)
-
-/* Reset the friggin' thing... */
-#define DMA_RESET(dma) do { \
- struct sparc_dma_registers *regs = dma->regs; \
- /* Let the current FIFO drain itself */ \
- sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
- /* Reset the logic */ \
- regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
- __delay(400); /* let the bits set ;) */ \
- regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
- sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
- /* Enable FAST transfers if available */ \
- if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
- dma->running = 0; \
-} while(0)
-
-
-#endif /* !CONFIG_SUN3 */
-
-#endif /* !(__M68K_DVMA_H) */
+++ /dev/null
-#ifndef __ASMm68k_ELF_H
-#define __ASMm68k_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * 68k ELF relocation types
- */
-#define R_68K_NONE 0
-#define R_68K_32 1
-#define R_68K_16 2
-#define R_68K_8 3
-#define R_68K_PC32 4
-#define R_68K_PC16 5
-#define R_68K_PC8 6
-#define R_68K_GOT32 7
-#define R_68K_GOT16 8
-#define R_68K_GOT8 9
-#define R_68K_GOT32O 10
-#define R_68K_GOT16O 11
-#define R_68K_GOT8O 12
-#define R_68K_PLT32 13
-#define R_68K_PLT16 14
-#define R_68K_PLT8 15
-#define R_68K_PLT32O 16
-#define R_68K_PLT16O 17
-#define R_68K_PLT8O 18
-#define R_68K_COPY 19
-#define R_68K_GLOB_DAT 20
-#define R_68K_JMP_SLOT 21
-#define R_68K_RELATIVE 22
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_m68kfp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_68K)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_68K
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
- passed in %a1. Although my copy of the ABI has no such statement, it
- is actually used on ASV. */
-#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-
-#define USE_ELF_CORE_DUMP
-#ifndef CONFIG_SUN3
-#define ELF_EXEC_PAGESIZE 4096
-#else
-#define ELF_EXEC_PAGESIZE 8192
-#endif
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#ifndef CONFIG_SUN3
-#define ELF_ET_DYN_BASE 0xD0000000UL
-#else
-#define ELF_ET_DYN_BASE 0x0D800000UL
-#endif
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- /* Bleech. */ \
- pr_reg[0] = regs->d1; \
- pr_reg[1] = regs->d2; \
- pr_reg[2] = regs->d3; \
- pr_reg[3] = regs->d4; \
- pr_reg[4] = regs->d5; \
- pr_reg[7] = regs->a0; \
- pr_reg[8] = regs->a1; \
- pr_reg[9] = regs->a2; \
- pr_reg[14] = regs->d0; \
- pr_reg[15] = rdusp(); \
- pr_reg[16] = regs->orig_d0; \
- pr_reg[17] = regs->sr; \
- pr_reg[18] = regs->pc; \
- pr_reg[19] = (regs->format << 12) | regs->vector; \
- { \
- struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
- pr_reg[5] = sw->d6; \
- pr_reg[6] = sw->d7; \
- pr_reg[10] = sw->a3; \
- pr_reg[11] = sw->a4; \
- pr_reg[12] = sw->a5; \
- pr_reg[13] = sw->a6; \
- }
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-#endif
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef __M68K_ENTRY_H
-#define __M68K_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- * 0(sp) - d1
- * 4(sp) - d2
- * 8(sp) - d3
- * C(sp) - d4
- * 10(sp) - d5
- * 14(sp) - a0
- * 18(sp) - a1
- * 1C(sp) - a2
- * 20(sp) - d0
- * 24(sp) - orig_d0
- * 28(sp) - stack adjustment
- * 2C(sp) - sr
- * 2E(sp) - pc
- * 32(sp) - format & vector
- */
-
-/*
- * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
- * the whole kernel.
- */
-
-/* the following macro is used when enabling interrupts */
-#if defined(MACH_ATARI_ONLY)
- /* block out HSYNC on the atari */
-#define ALLOWINT (~0x400)
-#define MAX_NOINT_IPL 3
-#else
- /* portable version */
-#define ALLOWINT (~0x700)
-#define MAX_NOINT_IPL 0
-#endif /* machine compilation types */
-
-#ifdef __ASSEMBLY__
-
-#define curptr a2
-
-LFLUSH_I_AND_D = 0x00000808
-LSIGTRAP = 5
-
-/* process bits for task_struct.ptrace */
-PT_TRACESYS_OFF = 3
-PT_TRACESYS_BIT = 1
-PT_PTRACED_OFF = 3
-PT_PTRACED_BIT = 0
-PT_DTRACE_OFF = 3
-PT_DTRACE_BIT = 2
-
-#define SAVE_ALL_INT save_all_int
-#define SAVE_ALL_SYS save_all_sys
-#define RESTORE_ALL restore_all
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs a3-a6 and d6-d7 are preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-/*
- * a -1 in the orig_d0 field signifies
- * that the stack frame is NOT for syscall
- */
-.macro save_all_int
- clrl %sp@- | stk_adj
- pea -1:w | orig d0
- movel %d0,%sp@- | d0
- moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
-.endm
-
-.macro save_all_sys
- clrl %sp@- | stk_adj
- movel %d0,%sp@- | orig d0
- movel %d0,%sp@- | d0
- moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
-.endm
-
-.macro restore_all
- moveml %sp@+,%a0-%a1/%curptr/%d1-%d5
- movel %sp@+,%d0
- addql #4,%sp | orig d0
- addl %sp@+,%sp | stk adj
- rte
-.endm
-
-#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
-
-#define SAVE_SWITCH_STACK save_switch_stack
-#define RESTORE_SWITCH_STACK restore_switch_stack
-#define GET_CURRENT(tmp) get_current tmp
-
-.macro save_switch_stack
- moveml %a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro restore_switch_stack
- moveml %sp@+,%a3-%a6/%d6-%d7
-.endm
-
-.macro get_current reg=%d0
- movel %sp,\reg
- andw #-THREAD_SIZE,\reg
- movel \reg,%curptr
- movel %curptr@,%curptr
-.endm
-
-#else /* C source */
-
-#define STR(X) STR1(X)
-#define STR1(X) #X
-
-#define PT_OFF_ORIG_D0 0x24
-#define PT_OFF_FORMATVEC 0x32
-#define PT_OFF_SR 0x2C
-#define SAVE_ALL_INT \
- "clrl %%sp@-;" /* stk_adj */ \
- "pea -1:w;" /* orig d0 = -1 */ \
- "movel %%d0,%%sp@-;" /* d0 */ \
- "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
-#define GET_CURRENT(tmp) \
- "movel %%sp,"#tmp"\n\t" \
- "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
- "movel "#tmp",%%a2\n\t" \
- "movel %%a2@,%%a2"
-
-#endif
-
-#endif /* __M68K_ENTRY_H */
+++ /dev/null
-#ifndef _M68K_ERRNO_H
-#define _M68K_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _M68K_ERRNO_H */
+++ /dev/null
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_SUN3
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
- unsigned long off)
-{
- pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE;
-}
-#else
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
- unsigned long off)
-{
- if (CPU_IS_020_OR_030)
- pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030;
- if (CPU_IS_040_OR_060) {
- pgprot_val(vma->vm_page_prot) &= _CACHEMASK040;
- /* Use no-cache mode, serialized */
- pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S;
- }
-}
-#endif /* CONFIG_SUN3 */
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+++ /dev/null
-#ifndef __LINUX_FBIO_H
-#define __LINUX_FBIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Constants used for fbio SunOS compatibility */
-/* (C) 1996 Miguel de Icaza */
-
-/* Frame buffer types */
-#define FBTYPE_NOTYPE -1
-#define FBTYPE_SUN1BW 0 /* mono */
-#define FBTYPE_SUN1COLOR 1
-#define FBTYPE_SUN2BW 2
-#define FBTYPE_SUN2COLOR 3
-#define FBTYPE_SUN2GP 4
-#define FBTYPE_SUN5COLOR 5
-#define FBTYPE_SUN3COLOR 6
-#define FBTYPE_MEMCOLOR 7
-#define FBTYPE_SUN4COLOR 8
-
-#define FBTYPE_NOTSUN1 9
-#define FBTYPE_NOTSUN2 10
-#define FBTYPE_NOTSUN3 11
-
-#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */
-#define FBTYPE_SUNROP_COLOR 13
-#define FBTYPE_SUNFB_VIDEO 14
-#define FBTYPE_SUNGIFB 15
-#define FBTYPE_SUNGPLAS 16
-#define FBTYPE_SUNGP3 17
-#define FBTYPE_SUNGT 18
-#define FBTYPE_SUNLEO 19 /* zx Leo card */
-#define FBTYPE_MDICOLOR 20 /* cg14 */
-#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */
-
-#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */
-
-/* Does not seem to be listed in the Sun file either */
-#define FBTYPE_CREATOR 22
-#define FBTYPE_PCI_IGA1682 23
-#define FBTYPE_P9100COLOR 24
-
-#define FBTYPE_PCI_GENERIC 1000
-#define FBTYPE_PCI_MACH64 1001
-
-/* fbio ioctls */
-/* Returned by FBIOGTYPE */
-struct fbtype {
- int fb_type; /* fb type, see above */
- int fb_height; /* pixels */
- int fb_width; /* pixels */
- int fb_depth;
- int fb_cmsize; /* color map entries */
- int fb_size; /* fb size in bytes */
-};
-#define FBIOGTYPE _IOR('F', 0, struct fbtype)
-
-struct fbcmap {
- int index; /* first element (0 origin) */
- int count;
- unsigned char __user *red;
- unsigned char __user *green;
- unsigned char __user *blue;
-};
-
-#ifdef __KERNEL__
-#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
-#else
-#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
-#endif
-
-/* # of device specific values */
-#define FB_ATTR_NDEVSPECIFIC 8
-/* # of possible emulations */
-#define FB_ATTR_NEMUTYPES 4
-
-struct fbsattr {
- int flags;
- int emu_type; /* -1 if none */
- int dev_specific[FB_ATTR_NDEVSPECIFIC];
-};
-
-struct fbgattr {
- int real_type; /* real frame buffer type */
- int owner; /* unknown */
- struct fbtype fbtype; /* real frame buffer fbtype */
- struct fbsattr sattr;
- int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
-};
-#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */
-#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */
-
-#define FBIOSVIDEO _IOW('F', 7, int)
-#define FBIOGVIDEO _IOR('F', 8, int)
-
-struct fbcursor {
- short set; /* what to set, choose from the list above */
- short enable; /* cursor on/off */
- struct fbcurpos pos; /* cursor position */
- struct fbcurpos hot; /* cursor hot spot */
- struct fbcmap cmap; /* color map info */
- struct fbcurpos size; /* cursor bit map size */
- char __user *image; /* cursor image bits */
- char __user *mask; /* cursor mask bits */
-};
-
-/* set/get cursor attributes/shape */
-#define FBIOSCURSOR _IOW('F', 24, struct fbcursor)
-#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor)
-
-/* set/get cursor position */
-#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos)
-#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos)
-
-/* get max cursor size */
-#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos)
-
-/* wid manipulation */
-struct fb_wid_alloc {
-#define FB_WID_SHARED_8 0
-#define FB_WID_SHARED_24 1
-#define FB_WID_DBL_8 2
-#define FB_WID_DBL_24 3
- __u32 wa_type;
- __s32 wa_index; /* Set on return */
- __u32 wa_count;
-};
-struct fb_wid_item {
- __u32 wi_type;
- __s32 wi_index;
- __u32 wi_attrs;
- __u32 wi_values[32];
-};
-struct fb_wid_list {
- __u32 wl_flags;
- __u32 wl_count;
- struct fb_wid_item *wl_list;
-};
-
-#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc)
-#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc)
-#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list)
-#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list)
-
-/* Creator ioctls */
-#define FFB_IOCTL ('F'<<8)
-#define FFB_SYS_INFO (FFB_IOCTL|80)
-#define FFB_CLUTREAD (FFB_IOCTL|81)
-#define FFB_CLUTPOST (FFB_IOCTL|82)
-#define FFB_SETDIAGMODE (FFB_IOCTL|83)
-#define FFB_GETMONITORID (FFB_IOCTL|84)
-#define FFB_GETVIDEOMODE (FFB_IOCTL|85)
-#define FFB_SETVIDEOMODE (FFB_IOCTL|86)
-#define FFB_SETSERVER (FFB_IOCTL|87)
-#define FFB_SETOVCTL (FFB_IOCTL|88)
-#define FFB_GETOVCTL (FFB_IOCTL|89)
-#define FFB_GETSAXNUM (FFB_IOCTL|90)
-#define FFB_FBDEBUG (FFB_IOCTL|91)
-
-/* Cg14 ioctls */
-#define MDI_IOCTL ('M'<<8)
-#define MDI_RESET (MDI_IOCTL|1)
-#define MDI_GET_CFGINFO (MDI_IOCTL|2)
-#define MDI_SET_PIXELMODE (MDI_IOCTL|3)
-# define MDI_32_PIX 32
-# define MDI_16_PIX 16
-# define MDI_8_PIX 8
-
-struct mdi_cfginfo {
- int mdi_ncluts; /* Number of implemented CLUTs in this MDI */
- int mdi_type; /* FBTYPE name */
- int mdi_height; /* height */
- int mdi_width; /* widht */
- int mdi_size; /* available ram */
- int mdi_mode; /* 8bpp, 16bpp or 32bpp */
- int mdi_pixfreq; /* pixel clock (from PROM) */
-};
-
-/* SparcLinux specific ioctl for the MDI, should be replaced for
- * the SET_XLUT/SET_CLUTn ioctls instead
- */
-#define MDI_CLEAR_XLUT (MDI_IOCTL|9)
-
-/* leo & ffb ioctls */
-struct fb_clut_alloc {
- __u32 clutid; /* Set on return */
- __u32 flag;
- __u32 index;
-};
-
-struct fb_clut {
-#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */
- __u32 flag;
- __u32 clutid;
- __u32 offset;
- __u32 count;
- char * red;
- char * green;
- char * blue;
-};
-
-struct fb_clut32 {
- __u32 flag;
- __u32 clutid;
- __u32 offset;
- __u32 count;
- __u32 red;
- __u32 green;
- __u32 blue;
-};
-
-#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc)
-#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc)
-#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut)
-#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut)
-#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */
-#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */
-
-#ifdef __KERNEL__
-/* Addresses on the fd of a cgsix that are mappable */
-#define CG6_FBC 0x70000000
-#define CG6_TEC 0x70001000
-#define CG6_BTREGS 0x70002000
-#define CG6_FHC 0x70004000
-#define CG6_THC 0x70005000
-#define CG6_ROM 0x70006000
-#define CG6_RAM 0x70016000
-#define CG6_DHC 0x80000000
-
-#define CG3_MMAP_OFFSET 0x4000000
-
-/* Addresses on the fd of a tcx that are mappable */
-#define TCX_RAM8BIT 0x00000000
-#define TCX_RAM24BIT 0x01000000
-#define TCX_UNK3 0x10000000
-#define TCX_UNK4 0x20000000
-#define TCX_CONTROLPLANE 0x28000000
-#define TCX_UNK6 0x30000000
-#define TCX_UNK7 0x38000000
-#define TCX_TEC 0x70000000
-#define TCX_BTREGS 0x70002000
-#define TCX_THC 0x70004000
-#define TCX_DHC 0x70008000
-#define TCX_ALT 0x7000a000
-#define TCX_SYNC 0x7000e000
-#define TCX_UNK2 0x70010000
-
-/* CG14 definitions */
-
-/* Offsets into the OBIO space: */
-#define CG14_REGS 0 /* registers */
-#define CG14_CURSORREGS 0x1000 /* cursor registers */
-#define CG14_DACREGS 0x2000 /* DAC registers */
-#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */
-#define CG14_CLUT1 0x4000 /* Color Look Up Table */
-#define CG14_CLUT2 0x5000 /* Color Look Up Table */
-#define CG14_CLUT3 0x6000 /* Color Look Up Table */
-#define CG14_AUTO 0xf000
-
-#endif /* KERNEL */
-
-/* These are exported to userland for applications to use */
-/* Mappable offsets for the cg14: control registers */
-#define MDI_DIRECT_MAP 0x10000000
-#define MDI_CTLREG_MAP 0x20000000
-#define MDI_CURSOR_MAP 0x30000000
-#define MDI_SHDW_VRT_MAP 0x40000000
-
-/* Mappable offsets for the cg14: frame buffer resolutions */
-/* 32 bits */
-#define MDI_CHUNKY_XBGR_MAP 0x50000000
-#define MDI_CHUNKY_BGR_MAP 0x60000000
-
-/* 16 bits */
-#define MDI_PLANAR_X16_MAP 0x70000000
-#define MDI_PLANAR_C16_MAP 0x80000000
-
-/* 8 bit is done as CG3 MMAP offset */
-/* 32 bits, planar */
-#define MDI_PLANAR_X32_MAP 0x90000000
-#define MDI_PLANAR_B32_MAP 0xa0000000
-#define MDI_PLANAR_G32_MAP 0xb0000000
-#define MDI_PLANAR_R32_MAP 0xc0000000
-
-/* Mappable offsets on leo */
-#define LEO_SS0_MAP 0x00000000
-#define LEO_LC_SS0_USR_MAP 0x00800000
-#define LEO_LD_SS0_MAP 0x00801000
-#define LEO_LX_CURSOR_MAP 0x00802000
-#define LEO_SS1_MAP 0x00803000
-#define LEO_LC_SS1_USR_MAP 0x01003000
-#define LEO_LD_SS1_MAP 0x01004000
-#define LEO_UNK_MAP 0x01005000
-#define LEO_LX_KRN_MAP 0x01006000
-#define LEO_LC_SS0_KRN_MAP 0x01007000
-#define LEO_LC_SS1_KRN_MAP 0x01008000
-#define LEO_LD_GBL_MAP 0x01009000
-#define LEO_UNK2_MAP 0x0100a000
-
-#ifdef __KERNEL__
-struct fbcmap32 {
- int index; /* first element (0 origin) */
- int count;
- u32 red;
- u32 green;
- u32 blue;
-};
-
-#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32)
-#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32)
-
-struct fbcursor32 {
- short set; /* what to set, choose from the list above */
- short enable; /* cursor on/off */
- struct fbcurpos pos; /* cursor position */
- struct fbcurpos hot; /* cursor hot spot */
- struct fbcmap32 cmap; /* color map info */
- struct fbcurpos size; /* cursor bit map size */
- u32 image; /* cursor image bits */
- u32 mask; /* cursor mask bits */
-};
-
-#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32)
-#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32)
-#endif
-
-#endif /* __LINUX_FBIO_H */
+++ /dev/null
-#ifndef _M68K_FCNTL_H
-#define _M68K_FCNTL_H
-
-#define O_DIRECTORY 040000 /* must be a directory */
-#define O_NOFOLLOW 0100000 /* don't follow links */
-#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
-#define O_LARGEFILE 0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _M68K_FCNTL_H */
+++ /dev/null
-/*
- * Implementation independent bits of the Floppy driver.
- *
- * much of this file is derived from what was originally the Q40 floppy driver.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999, 2000, 2001
- *
- * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net)
- *
- */
-
-#include <asm/io.h>
-
-#include <linux/vmalloc.h>
-
-asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id);
-
-/* constants... */
-
-#undef MAX_DMA_ADDRESS
-#define MAX_DMA_ADDRESS 0x00 /* nothing like that */
-
-
-/*
- * Again, the CMOS information doesn't work on m68k..
- */
-#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4)
-#define FLOPPY1_TYPE 0
-
-/* basically PC init + set use_virtual_dma */
-#define FDC1 m68k_floppy_init()
-
-#define N_FDC 1
-#define N_DRIVE 8
-
-
-/* vdma globals adapted from asm-i386/floppy.h */
-
-static int virtual_dma_count=0;
-static int virtual_dma_residue=0;
-static char *virtual_dma_addr=NULL;
-static int virtual_dma_mode=0;
-static int doing_pdma=0;
-
-#include <asm/sun3xflop.h>
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-
-static __inline__ unsigned char fd_inb(int port)
-{
- if(MACH_IS_Q40)
- return inb_p(port);
- else if(MACH_IS_SUN3X)
- return sun3x_82072_fd_inb(port);
- return 0;
-}
-
-static __inline__ void fd_outb(unsigned char value, int port)
-{
- if(MACH_IS_Q40)
- outb_p(value, port);
- else if(MACH_IS_SUN3X)
- sun3x_82072_fd_outb(value, port);
-}
-
-
-static int fd_request_irq(void)
-{
- if(MACH_IS_Q40)
- return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", floppy_hardint);
- else if(MACH_IS_SUN3X)
- return sun3xflop_request_irq();
- return -ENXIO;
-}
-
-static void fd_free_irq(void)
-{
- if(MACH_IS_Q40)
- free_irq(FLOPPY_IRQ, floppy_hardint);
-}
-
-#define fd_request_dma() vdma_request_dma(FLOPPY_DMA,"floppy")
-#define fd_get_dma_residue() vdma_get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size) vdma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io)
-
-#define fd_enable_irq() /* nothing... */
-#define fd_disable_irq() /* nothing... */
-
-#define fd_free_dma() /* nothing */
-
-/* No 64k boundary crossing problems on Q40 - no DMA at all */
-#define CROSS_64KB(a,s) (0)
-
-#define DMA_MODE_READ 0x44 /* i386 look-alike */
-#define DMA_MODE_WRITE 0x48
-
-
-static int m68k_floppy_init(void)
-{
- use_virtual_dma =1;
- can_use_virtual_dma = 1;
-
-
- if (MACH_IS_Q40)
- return 0x3f0;
- else if(MACH_IS_SUN3X)
- return sun3xflop_init();
- else
- return -1;
-}
-
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
- return 0;
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
- return (unsigned long) vmalloc(size);
-
-}
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
- vfree((void *)addr);
-}
-#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size)
-
-
-/* choose_dma_mode ???*/
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_pdma = 1;
- virtual_dma_port = (MACH_IS_Q40 ? io : 0);
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-
-
-static void fd_disable_dma(void)
-{
- doing_pdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-
-
-/* this is the only truly Q40 specific function */
-
-asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if(!doing_pdma) {
- floppy_interrupt(irq, dev_id);
- return IRQ_HANDLED;
- }
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
- {
- register int lcount;
- register char *lptr;
-
- /* serve 1st byte fast: */
-
- st=1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
- break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
-
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
- }
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
- if(st == 0x20)
- return IRQ_HANDLED;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
- doing_pdma = 0;
- floppy_interrupt(irq, dev_id);
- return IRQ_HANDLED;
- }
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
- return IRQ_HANDLED;
-}
-
-#define EXTRA_FLOPPY_PARAMS
+++ /dev/null
-#ifndef __M68K_FPU_H
-#define __M68K_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216)
-#elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96)
-#elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28)
-#elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12)
-#else
-#define FPSTATESIZE (0)
-#endif
-
-#endif /* __M68K_FPU_H */
+++ /dev/null
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
+++ /dev/null
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS 8
-
-#endif
+++ /dev/null
-#ifndef _M68K_HP300HW_H
-#define _M68K_HP300HW_H
-
-extern unsigned long hp300_model;
-
-/* This information was taken from NetBSD */
-#define HP_320 (0) /* 16MHz 68020+HP MMU+16K external cache */
-#define HP_330 (1) /* 16MHz 68020+68851 MMU */
-#define HP_340 (2) /* 16MHz 68030 */
-#define HP_345 (3) /* 50MHz 68030+32K external cache */
-#define HP_350 (4) /* 25MHz 68020+HP MMU+32K external cache */
-#define HP_360 (5) /* 25MHz 68030 */
-#define HP_370 (6) /* 33MHz 68030+64K external cache */
-#define HP_375 (7) /* 50MHz 68030+32K external cache */
-#define HP_380 (8) /* 25MHz 68040 */
-#define HP_385 (9) /* 33MHz 68040 */
-
-#define HP_400 (10) /* 50MHz 68030+32K external cache */
-#define HP_425T (11) /* 25MHz 68040 - model 425t */
-#define HP_425S (12) /* 25MHz 68040 - model 425s */
-#define HP_425E (13) /* 25MHz 68040 - model 425e */
-#define HP_433T (14) /* 33MHz 68040 - model 433t */
-#define HP_433S (15) /* 33MHz 68040 - model 433s */
-
-#endif /* _M68K_HP300HW_H */
+++ /dev/null
-#ifndef __ASM_M68K_HW_IRQ_H
-#define __ASM_M68K_HW_IRQ_H
-
-/* Dummy include. */
-
-#endif
+++ /dev/null
-/* Routines to test for presence/absence of hardware registers:
- * see arch/m68k/mm/hwtest.c.
- * -- PMM <pmaydell@chiark.greenend.org.uk> 05/1998
- *
- * Removed __init from decls. We might want them in modules, and
- * the code is tiny anyway. 16/5/98 pb
- */
-
-#ifndef __ASM_HWTEST_H
-#define __ASM_HWTEST_H
-
-extern int hwreg_present(volatile void *regp);
-extern int hwreg_write(volatile void *regp, unsigned short val);
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-m68k/ide.h
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- */
-
-/* Copyright(c) 1996 Kars de Jong */
-/* Based on the ide driver from 1.2.13pl8 */
-
-/*
- * Credits (alphabetical):
- *
- * - Bjoern Brauel
- * - Kars de Jong
- * - Torsten Ebeling
- * - Dwight Engen
- * - Thorsten Floeck
- * - Roman Hodek
- * - Guenther Kelleter
- * - Chris Lawrence
- * - Michael Rausch
- * - Christian Sauer
- * - Michael Schmitz
- * - Jes Soerensen
- * - Michael Thurm
- * - Geert Uytterhoeven
- */
-
-#ifndef _M68K_IDE_H
-#define _M68K_IDE_H
-
-#ifdef __KERNEL__
-
-
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#ifdef CONFIG_ATARI
-#include <linux/interrupt.h>
-#include <asm/atari_stdma.h>
-#endif
-
-#ifdef CONFIG_MAC
-#include <asm/macints.h>
-#endif
-
-/*
- * Get rid of defs from io.h - ide has its private and conflicting versions
- * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
- * always use the `raw' MMIO versions
- */
-#undef inb
-#undef inw
-#undef insw
-#undef inl
-#undef insl
-#undef outb
-#undef outw
-#undef outsw
-#undef outl
-#undef outsl
-#undef readb
-#undef readw
-#undef readl
-#undef writeb
-#undef writew
-#undef writel
-
-#define inb in_8
-#define inw in_be16
-#define insw(port, addr, n) raw_insw((u16 *)port, addr, n)
-#define inl in_be32
-#define insl(port, addr, n) raw_insl((u32 *)port, addr, n)
-#define outb(val, port) out_8(port, val)
-#define outw(val, port) out_be16(port, val)
-#define outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
-#define outl(val, port) out_be32(port, val)
-#define outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
-#define readb in_8
-#define readw in_be16
-#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n)
-#define readl in_be32
-#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n)
-#define writeb(val, port) out_8(port, val)
-#define writew(val, port) out_be16(port, val)
-#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
-#define writel(val, port) out_be32(port, val)
-#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
-#define insw_swapw(port, addr, n) raw_insw_swapw((u16 *)port, addr, n)
-#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n)
-#endif
-
-#ifdef CONFIG_BLK_DEV_FALCON_IDE
-#define IDE_ARCH_LOCK
-
-extern int falconide_intr_lock;
-
-static __inline__ void ide_release_lock (void)
-{
- if (MACH_IS_ATARI) {
- if (falconide_intr_lock == 0) {
- printk("ide_release_lock: bug\n");
- return;
- }
- falconide_intr_lock = 0;
- stdma_release();
- }
-}
-
-static __inline__ void
-ide_get_lock(irq_handler_t handler, void *data)
-{
- if (MACH_IS_ATARI) {
- if (falconide_intr_lock == 0) {
- if (in_interrupt() > 0)
- panic( "Falcon IDE hasn't ST-DMA lock in interrupt" );
- stdma_lock(handler, data);
- falconide_intr_lock = 1;
- }
- }
-}
-#endif /* CONFIG_BLK_DEV_FALCON_IDE */
-
-#define IDE_ARCH_ACK_INTR
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-
-#endif /* __KERNEL__ */
-#endif /* _M68K_IDE_H */
+++ /dev/null
-#ifndef _M68K_IDPROM_H
-#define _M68K_IDPROM_H
-/*
- * idprom.h: Macros and defines for idprom routines
- *
- * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/types.h>
-
-struct idprom {
- u8 id_format; /* Format identifier (always 0x01) */
- u8 id_machtype; /* Machine type */
- u8 id_ethaddr[6]; /* Hardware ethernet address */
- s32 id_date; /* Date of manufacture */
- u32 id_sernum:24; /* Unique serial number */
- u8 id_cksum; /* Checksum - xor of the data bytes */
- u8 reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-/* Sun3: in control space */
-#define SUN3_IDPROM_BASE 0x00000000
-
-#endif /* !(_M68K_IDPROM_H) */
+++ /dev/null
-#ifndef _SUN3_INTERSIL_H
-#define _SUN3_INTERSIL_H
-/* bits 0 and 1 */
-#define INTERSIL_FREQ_32K 0x00
-#define INTERSIL_FREQ_1M 0x01
-#define INTERSIL_FREQ_2M 0x02
-#define INTERSIL_FREQ_4M 0x03
-
-/* bit 2 */
-#define INTERSIL_12H_MODE 0x00
-#define INTERSIL_24H_MODE 0x04
-
-/* bit 3 */
-#define INTERSIL_STOP 0x00
-#define INTERSIL_RUN 0x08
-
-/* bit 4 */
-#define INTERSIL_INT_ENABLE 0x10
-#define INTERSIL_INT_DISABLE 0x00
-
-/* bit 5 */
-#define INTERSIL_MODE_NORMAL 0x00
-#define INTERSIL_MODE_TEST 0x20
-
-#define INTERSIL_HZ_100_MASK 0x02
-
-struct intersil_dt {
- unsigned char csec;
- unsigned char hour;
- unsigned char minute;
- unsigned char second;
- unsigned char month;
- unsigned char day;
- unsigned char year;
- unsigned char weekday;
-};
-
-struct intersil_7170 {
- struct intersil_dt counter;
- struct intersil_dt alarm;
- unsigned char int_reg;
- unsigned char cmd_reg;
-};
-
-extern volatile char* clock_va;
-#define intersil_clock ((volatile struct intersil_7170 *) clock_va)
-#define intersil_clear() (void)intersil_clock->int_reg
-#endif
+++ /dev/null
-/*
- * linux/include/asm-m68k/io.h
- *
- * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other
- * IO access
- * - added Q40 support
- * - added skeleton for GG-II and Amiga PCMCIA
- * 2/3/01 RZ: - moved a few more defs into raw_io.h
- *
- * inX/outX should not be used by any driver unless it does
- * ISA access. Other drivers should use function defined in raw_io.h
- * or define its own macros on top of these.
- *
- * inX(),outX() are for ISA I/O
- * isa_readX(),isa_writeX() are for ISA memory
- */
-
-#ifndef _IO_H
-#define _IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/raw_io.h>
-#include <asm/virtconvert.h>
-
-#include <asm-generic/iomap.h>
-
-#ifdef CONFIG_ATARI
-#include <asm/atarihw.h>
-#endif
-
-
-/*
- * IO/MEM definitions for various ISA bridges
- */
-
-
-#ifdef CONFIG_Q40
-
-#define q40_isa_io_base 0xff400000
-#define q40_isa_mem_base 0xff800000
-
-#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr)))
-#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+ 4*((unsigned long)(ioaddr)))
-#define Q40_ISA_MEM_B(madr) (q40_isa_mem_base+1+4*((unsigned long)(madr)))
-#define Q40_ISA_MEM_W(madr) (q40_isa_mem_base+ 4*((unsigned long)(madr)))
-
-#define MULTI_ISA 0
-#endif /* Q40 */
-
-/* GG-II Zorro to ISA bridge */
-#ifdef CONFIG_GG2
-
-extern unsigned long gg2_isa_base;
-#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4))
-#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+ ((unsigned long)(ioaddr)*4))
-#define GG2_ISA_MEM_B(madr) (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff))
-#define GG2_ISA_MEM_W(madr) (gg2_isa_base+ (((unsigned long)(madr)*4) & 0xfffff))
-
-#ifndef MULTI_ISA
-#define MULTI_ISA 0
-#else
-#undef MULTI_ISA
-#define MULTI_ISA 1
-#endif
-#endif /* GG2 */
-
-#ifdef CONFIG_AMIGA_PCMCIA
-#include <asm/amigayle.h>
-
-#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) )
-#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) )
-
-#ifndef MULTI_ISA
-#define MULTI_ISA 0
-#else
-#undef MULTI_ISA
-#define MULTI_ISA 1
-#endif
-#endif /* AMIGA_PCMCIA */
-
-
-
-#ifdef CONFIG_ISA
-
-#if MULTI_ISA == 0
-#undef MULTI_ISA
-#endif
-
-#define ISA_TYPE_Q40 (1)
-#define ISA_TYPE_GG2 (2)
-#define ISA_TYPE_AG (3)
-
-#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
-#define ISA_TYPE ISA_TYPE_Q40
-#define ISA_SEX 0
-#endif
-#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
-#define ISA_TYPE ISA_TYPE_AG
-#define ISA_SEX 1
-#endif
-#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
-#define ISA_TYPE ISA_TYPE_GG2
-#define ISA_SEX 0
-#endif
-
-#ifdef MULTI_ISA
-extern int isa_type;
-extern int isa_sex;
-
-#define ISA_TYPE isa_type
-#define ISA_SEX isa_sex
-#endif
-
-/*
- * define inline addr translation functions. Normally only one variant will
- * be compiled in so the case statement will be optimised away
- */
-
-static inline u8 __iomem *isa_itb(unsigned long addr)
-{
- switch(ISA_TYPE)
- {
-#ifdef CONFIG_Q40
- case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
-#endif
-#ifdef CONFIG_GG2
- case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
- case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
-#endif
- default: return NULL; /* avoid warnings, just in case */
- }
-}
-static inline u16 __iomem *isa_itw(unsigned long addr)
-{
- switch(ISA_TYPE)
- {
-#ifdef CONFIG_Q40
- case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
-#endif
-#ifdef CONFIG_GG2
- case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
- case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
-#endif
- default: return NULL; /* avoid warnings, just in case */
- }
-}
-static inline u32 __iomem *isa_itl(unsigned long addr)
-{
- switch(ISA_TYPE)
- {
-#ifdef CONFIG_AMIGA_PCMCIA
- case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
-#endif
- default: return 0; /* avoid warnings, just in case */
- }
-}
-static inline u8 __iomem *isa_mtb(unsigned long addr)
-{
- switch(ISA_TYPE)
- {
-#ifdef CONFIG_Q40
- case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
-#endif
-#ifdef CONFIG_GG2
- case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
- case ISA_TYPE_AG: return (u8 __iomem *)addr;
-#endif
- default: return NULL; /* avoid warnings, just in case */
- }
-}
-static inline u16 __iomem *isa_mtw(unsigned long addr)
-{
- switch(ISA_TYPE)
- {
-#ifdef CONFIG_Q40
- case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
-#endif
-#ifdef CONFIG_GG2
- case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
- case ISA_TYPE_AG: return (u16 __iomem *)addr;
-#endif
- default: return NULL; /* avoid warnings, just in case */
- }
-}
-
-
-#define isa_inb(port) in_8(isa_itb(port))
-#define isa_inw(port) (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
-#define isa_inl(port) (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port)))
-#define isa_outb(val,port) out_8(isa_itb(port),(val))
-#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
-#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
-
-#define isa_readb(p) in_8(isa_mtb((unsigned long)(p)))
-#define isa_readw(p) \
- (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \
- : in_le16(isa_mtw((unsigned long)(p))))
-#define isa_writeb(val,p) out_8(isa_mtb((unsigned long)(p)),(val))
-#define isa_writew(val,p) \
- (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \
- : out_le16(isa_mtw((unsigned long)(p)),(val)))
-
-static inline void isa_delay(void)
-{
- switch(ISA_TYPE)
- {
-#ifdef CONFIG_Q40
- case ISA_TYPE_Q40: isa_outb(0,0x80); break;
-#endif
-#ifdef CONFIG_GG2
- case ISA_TYPE_GG2: break;
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
- case ISA_TYPE_AG: break;
-#endif
- default: break; /* avoid warnings */
- }
-}
-
-#define isa_inb_p(p) ({u8 v=isa_inb(p);isa_delay();v;})
-#define isa_outb_p(v,p) ({isa_outb((v),(p));isa_delay();})
-#define isa_inw_p(p) ({u16 v=isa_inw(p);isa_delay();v;})
-#define isa_outw_p(v,p) ({isa_outw((v),(p));isa_delay();})
-#define isa_inl_p(p) ({u32 v=isa_inl(p);isa_delay();v;})
-#define isa_outl_p(v,p) ({isa_outl((v),(p));isa_delay();})
-
-#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr))
-#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr))
-
-#define isa_insw(port, buf, nr) \
- (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) : \
- raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
-
-#define isa_outsw(port, buf, nr) \
- (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) : \
- raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
-
-#define isa_insl(port, buf, nr) \
- (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) : \
- raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
-
-#define isa_outsl(port, buf, nr) \
- (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) : \
- raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
-
-
-#define inb isa_inb
-#define inb_p isa_inb_p
-#define outb isa_outb
-#define outb_p isa_outb_p
-#define inw isa_inw
-#define inw_p isa_inw_p
-#define outw isa_outw
-#define outw_p isa_outw_p
-#define inl isa_inl
-#define inl_p isa_inl_p
-#define outl isa_outl
-#define outl_p isa_outl_p
-#define insb isa_insb
-#define insw isa_insw
-#define insl isa_insl
-#define outsb isa_outsb
-#define outsw isa_outsw
-#define outsl isa_outsl
-#define readb isa_readb
-#define readw isa_readw
-#define writeb isa_writeb
-#define writew isa_writew
-
-#else /* CONFIG_ISA */
-
-/*
- * We need to define dummy functions for GENERIC_IOMAP support.
- */
-#define inb(port) 0xff
-#define inb_p(port) 0xff
-#define outb(val,port) ((void)0)
-#define outb_p(val,port) ((void)0)
-#define inw(port) 0xffff
-#define outw(val,port) ((void)0)
-#define inl(port) 0xffffffffUL
-#define outl(val,port) ((void)0)
-
-#define insb(port,buf,nr) ((void)0)
-#define outsb(port,buf,nr) ((void)0)
-#define insw(port,buf,nr) ((void)0)
-#define outsw(port,buf,nr) ((void)0)
-#define insl(port,buf,nr) ((void)0)
-#define outsl(port,buf,nr) ((void)0)
-
-/*
- * These should be valid on any ioremap()ed region
- */
-#define readb(addr) in_8(addr)
-#define writeb(val,addr) out_8((addr),(val))
-#define readw(addr) in_le16(addr)
-#define writew(val,addr) out_le16((addr),(val))
-
-#endif /* CONFIG_ISA */
-
-#define readl(addr) in_le32(addr)
-#define writel(val,addr) out_le32((addr),(val))
-
-#define mmiowb()
-
-static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
- __builtin_memset((void __force *) addr, val, count);
-}
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
- __builtin_memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
- __builtin_memcpy((void __force *) dst, src, count);
-}
-
-#ifndef CONFIG_SUN3
-#define IO_SPACE_LIMIT 0xffff
-#else
-#define IO_SPACE_LIMIT 0x0fffffff
-#endif
-
-#endif /* __KERNEL__ */
-
-#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* _IO_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#ifndef __ARCH_M68K_IOCTLS_H__
-#define __ARCH_M68K_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* __ARCH_M68K_IOCTLS_H__ */
+++ /dev/null
-#ifndef __m68k_IPCBUF_H__
-#define __m68k_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __m68k_IPCBUF_H__ */
+++ /dev/null
-#ifndef _M68K_IRQ_H_
-#define _M68K_IRQ_H_
-
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/spinlock_types.h>
-
-/*
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-#define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
-#define NR_IRQS 72
-#elif defined(CONFIG_Q40)
-#define NR_IRQS 43
-#elif defined(CONFIG_AMIGA)
-#define NR_IRQS 32
-#elif defined(CONFIG_APOLLO)
-#define NR_IRQS 24
-#elif defined(CONFIG_HP300)
-#define NR_IRQS 8
-#else
-#define NR_IRQS 0
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-/*
- * Interrupt source definitions
- * General interrupt sources are the level 1-7.
- * Adding an interrupt service routine for one of these sources
- * results in the addition of that routine to a chain of routines.
- * Each one is called in succession. Each individual interrupt
- * service routine should determine if the device associated with
- * that routine requires service.
- */
-
-#define IRQ_SPURIOUS 0
-
-#define IRQ_AUTO_1 1 /* level 1 interrupt */
-#define IRQ_AUTO_2 2 /* level 2 interrupt */
-#define IRQ_AUTO_3 3 /* level 3 interrupt */
-#define IRQ_AUTO_4 4 /* level 4 interrupt */
-#define IRQ_AUTO_5 5 /* level 5 interrupt */
-#define IRQ_AUTO_6 6 /* level 6 interrupt */
-#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
-
-#define IRQ_USER 8
-
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
-#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
-#define IRQ_FLG_FAST (0x0004)
-#define IRQ_FLG_SLOW (0x0008)
-#define IRQ_FLG_STD (0x8000) /* internally used */
-#endif
-
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
- int (*handler)(int, void *);
- void *dev_id;
- struct irq_node *next;
- unsigned long flags;
- const char *devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
- int (*handler)(int, void *);
- unsigned long flags;
- void *dev_id;
- const char *devname;
-};
-
-struct irq_controller {
- const char *name;
- spinlock_t lock;
- int (*startup)(unsigned int irq);
- void (*shutdown)(unsigned int irq);
- void (*enable)(unsigned int irq);
- void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
-
-#endif /* _M68K_IRQ_H_ */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
-
-#endif /* __ASM_M68K_KMAP_TYPES_H */
+++ /dev/null
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .align 4
-#define __ALIGN_STR ".align 4"
-
-#endif
+++ /dev/null
-#ifndef _ASM_M68K_LOCAL_H
-#define _ASM_M68K_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _ASM_M68K_LOCAL_H */
+++ /dev/null
-/*
- * Apple Sound Chip
- */
-
-#ifndef __ASM_MAC_ASC_H
-#define __ASM_MAC_ASC_H
-
-/*
- * ASC offsets and controls
- */
-
-#define ASC_BUF_BASE 0x00 /* RAM buffer offset */
-#define ASC_BUF_SIZE 0x800
-
-#define ASC_CONTROL 0x800
-#define ASC_CONTROL_OFF 0x00
-#define ASC_FREQ(chan,byte) ((0x810)+((chan)<<3)+(byte))
-#define ASC_ENABLE 0x801
-#define ASC_ENABLE_SAMPLE 0x02
-#define ASC_MODE 0x802
-#define ASC_MODE_SAMPLE 0x02
-
-#define ASC_VOLUME 0x806
-#define ASC_CHAN 0x807 /* ??? */
-
-
-#endif
+++ /dev/null
-/*
- * Definitions for the "Baboon" custom IC on the PowerBook 190.
- */
-
-#define BABOON_BASE (0x50F1A000) /* same as IDE controller base */
-
-#ifndef __ASSEMBLY__
-
-struct baboon {
- char pad1[208]; /* generic IDE registers, not used here */
- short mb_control; /* Control register:
- * bit 5 : slot 2 power control
- * bit 6 : slot 1 power control
- */
- char pad2[2];
- short mb_status; /* (0xD4) media bay status register:
- *
- * bit 0: ????
- * bit 1: IDE interrupt active?
- * bit 2: bay status, 0 = full, 1 = empty
- * bit 3: ????
- */
- char pad3[2]; /* (0xD6) not used */
- short mb_ifr; /* (0xD8) media bay interrupt flags register:
- *
- * bit 0: ????
- * bit 1: IDE controller interrupt
- * bit 2: media bay status change interrupt
- */
-};
-
-#endif /* __ASSEMBLY **/
+++ /dev/null
-/*
- * I/O Processor (IOP) defines and structures, mostly snagged from A/UX
- * header files.
- *
- * The original header from which this was taken is copyrighted. I've done some
- * rewriting (in fact my changes make this a bit more readable, IMHO) but some
- * more should be done.
- */
-
-/*
- * This is the base address of the IOPs. Use this as the address of
- * a "struct iop" (see below) to see where the actual registers fall.
- */
-
-#define SCC_IOP_BASE_IIFX (0x50F04000)
-#define ISM_IOP_BASE_IIFX (0x50F12000)
-
-#define SCC_IOP_BASE_QUADRA (0x50F0C000)
-#define ISM_IOP_BASE_QUADRA (0x50F1E000)
-
-/* IOP status/control register bits: */
-
-#define IOP_BYPASS 0x01 /* bypass-mode hardware access */
-#define IOP_AUTOINC 0x02 /* allow autoincrement of ramhi/lo */
-#define IOP_RUN 0x04 /* set to 0 to reset IOP chip */
-#define IOP_IRQ 0x08 /* generate IRQ to IOP if 1 */
-#define IOP_INT0 0x10 /* intr priority from IOP to host */
-#define IOP_INT1 0x20 /* intr priority from IOP to host */
-#define IOP_HWINT 0x40 /* IRQ from hardware; bypass mode only */
-#define IOP_DMAINACTIVE 0x80 /* no DMA request active; bypass mode only */
-
-#define NUM_IOPS 2
-#define NUM_IOP_CHAN 7
-#define NUM_IOP_MSGS NUM_IOP_CHAN*8
-#define IOP_MSG_LEN 32
-
-/* IOP reference numbers, used by the globally-visible iop_xxx functions */
-
-#define IOP_NUM_SCC 0
-#define IOP_NUM_ISM 1
-
-/* IOP channel states */
-
-#define IOP_MSG_IDLE 0 /* idle */
-#define IOP_MSG_NEW 1 /* new message sent */
-#define IOP_MSG_RCVD 2 /* message received; processing */
-#define IOP_MSG_COMPLETE 3 /* message processing complete */
-
-/* IOP message status codes */
-
-#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */
-#define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */
-#define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */
-#define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */
-#define IOP_MSGSTATUS_UNSOL 6 /* message is unsolicited */
-
-/* IOP memory addresses of the members of the mac_iop_kernel structure. */
-
-#define IOP_ADDR_MAX_SEND_CHAN 0x0200
-#define IOP_ADDR_SEND_STATE 0x0201
-#define IOP_ADDR_PATCH_CTRL 0x021F
-#define IOP_ADDR_SEND_MSG 0x0220
-#define IOP_ADDR_MAX_RECV_CHAN 0x0300
-#define IOP_ADDR_RECV_STATE 0x0301
-#define IOP_ADDR_ALIVE 0x031F
-#define IOP_ADDR_RECV_MSG 0x0320
-
-#ifndef __ASSEMBLY__
-
-/*
- * IOP Control registers, staggered because in usual Apple style they were
- * too lazy to decode the A0 bit. This structure is assumed to begin at
- * one of the xxx_IOP_BASE addresses given above.
- */
-
-struct mac_iop {
- __u8 ram_addr_hi; /* shared RAM address hi byte */
- __u8 pad0;
- __u8 ram_addr_lo; /* shared RAM address lo byte */
- __u8 pad1;
- __u8 status_ctrl; /* status/control register */
- __u8 pad2[3];
- __u8 ram_data; /* RAM data byte at ramhi/lo */
-
- __u8 pad3[23];
-
- /* Bypass-mode hardware access registers */
-
- union {
- struct { /* SCC registers */
- __u8 sccb_cmd; /* SCC B command reg */
- __u8 pad4;
- __u8 scca_cmd; /* SCC A command reg */
- __u8 pad5;
- __u8 sccb_data; /* SCC B data */
- __u8 pad6;
- __u8 scca_data; /* SCC A data */
- } scc_regs;
-
- struct { /* ISM registers */
- __u8 wdata; /* write a data byte */
- __u8 pad7;
- __u8 wmark; /* write a mark byte */
- __u8 pad8;
- __u8 wcrc; /* write 2-byte crc to disk */
- __u8 pad9;
- __u8 wparams; /* write the param regs */
- __u8 pad10;
- __u8 wphase; /* write the phase states & dirs */
- __u8 pad11;
- __u8 wsetup; /* write the setup register */
- __u8 pad12;
- __u8 wzeroes; /* mode reg: 1's clr bits, 0's are x */
- __u8 pad13;
- __u8 wones; /* mode reg: 1's set bits, 0's are x */
- __u8 pad14;
- __u8 rdata; /* read a data byte */
- __u8 pad15;
- __u8 rmark; /* read a mark byte */
- __u8 pad16;
- __u8 rerror; /* read the error register */
- __u8 pad17;
- __u8 rparams; /* read the param regs */
- __u8 pad18;
- __u8 rphase; /* read the phase states & dirs */
- __u8 pad19;
- __u8 rsetup; /* read the setup register */
- __u8 pad20;
- __u8 rmode; /* read the mode register */
- __u8 pad21;
- __u8 rhandshake; /* read the handshake register */
- } ism_regs;
- } b;
-};
-
-/* This structure is used to track IOP messages in the Linux kernel */
-
-struct iop_msg {
- struct iop_msg *next; /* next message in queue or NULL */
- uint iop_num; /* IOP number */
- uint channel; /* channel number */
- void *caller_priv; /* caller private data */
- int status; /* status of this message */
- __u8 message[IOP_MSG_LEN]; /* the message being sent/received */
- __u8 reply[IOP_MSG_LEN]; /* the reply to the message */
- void (*handler)(struct iop_msg *);
- /* function to call when reply recvd */
-};
-
-extern int iop_scc_present,iop_ism_present;
-
-extern int iop_listen(uint, uint,
- void (*handler)(struct iop_msg *),
- const char *);
-extern int iop_send_message(uint, uint, void *, uint, __u8 *,
- void (*)(struct iop_msg *));
-extern void iop_complete_message(struct iop_msg *);
-extern void iop_upload_code(uint, __u8 *, uint, __u16);
-extern void iop_download_code(uint, __u8 *, uint, __u16);
-extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
-
-#endif /* __ASSEMBLY__ */
+++ /dev/null
-#ifndef _ASM_MAC_MOUSE_H
-#define _ASM_MAC_MOUSE_H
-
-/*
- * linux/include/asm-m68k/mac_mouse.h
- * header file for Macintosh ADB mouse driver
- * 27-10-97 Michael Schmitz
- * copied from:
- * header file for Atari Mouse driver
- * by Robert de Vries (robert@and.nl) on 19Jul93
- */
-
-struct mouse_status {
- char buttons;
- short dx;
- short dy;
- int ready;
- int active;
- wait_queue_head_t wait;
- struct fasync_struct *fasyncptr;
-};
-
-#endif
+++ /dev/null
-/*
- * OSS
- *
- * This is used in place of VIA2 on the IIfx.
- */
-
-#define OSS_BASE (0x50f1a000)
-
-/*
- * Interrupt level offsets for mac_oss->irq_level
- */
-
-#define OSS_NUBUS0 0
-#define OSS_NUBUS1 1
-#define OSS_NUBUS2 2
-#define OSS_NUBUS3 3
-#define OSS_NUBUS4 4
-#define OSS_NUBUS5 5
-#define OSS_IOPISM 6
-#define OSS_IOPSCC 7
-#define OSS_SOUND 8
-#define OSS_SCSI 9
-#define OSS_60HZ 10
-#define OSS_VIA1 11
-#define OSS_UNUSED1 12
-#define OSS_UNUSED2 13
-#define OSS_PARITY 14
-#define OSS_UNUSED3 15
-
-#define OSS_NUM_SOURCES 16
-
-/*
- * Pending interrupt bits in mac_oss->irq_pending
- */
-
-#define OSS_IP_NUBUS0 0x0001
-#define OSS_IP_NUBUS1 0x0002
-#define OSS_IP_NUBUS2 0x0004
-#define OSS_IP_NUBUS3 0x0008
-#define OSS_IP_NUBUS4 0x0010
-#define OSS_IP_NUBUS5 0x0020
-#define OSS_IP_IOPISM 0x0040
-#define OSS_IP_IOPSCC 0x0080
-#define OSS_IP_SOUND 0x0100
-#define OSS_IP_SCSI 0x0200
-#define OSS_IP_60HZ 0x0400
-#define OSS_IP_VIA1 0x0800
-#define OSS_IP_UNUSED1 0x1000
-#define OSS_IP_UNUSED2 0x2000
-#define OSS_IP_PARITY 0x4000
-#define OSS_IP_UNUSED3 0x8000
-
-#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5)
-
-/*
- * Rom Control Register
- */
-
-#define OSS_POWEROFF 0x80
-
-/*
- * OSS Interrupt levels for various sub-systems
- *
- * This mapping is layed out with two things in mind: first, we try to keep
- * things on their own levels to avoid having to do double-dispatches. Second,
- * the levels match as closely as possible the alternate IRQ mapping mode (aka
- * "A/UX mode") available on some VIA machines.
- */
-
-#define OSS_IRQLEV_DISABLED 0
-#define OSS_IRQLEV_IOPISM 1 /* ADB? */
-#define OSS_IRQLEV_SCSI IRQ_AUTO_2
-#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */
-#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */
-#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */
-
-#ifndef __ASSEMBLY__
-
-struct mac_oss {
- __u8 irq_level[0x10]; /* [0x000-0x00f] Interrupt levels */
- __u8 padding0[0x1F2]; /* [0x010-0x201] IO space filler */
- __u16 irq_pending; /* [0x202-0x203] pending interrupts bits */
- __u8 rom_ctrl; /* [0x204-0x204] ROM cntl reg (for poweroff) */
- __u8 padding1[0x2]; /* [0x205-0x206] currently unused by A/UX */
- __u8 ack_60hz; /* [0x207-0x207] 60 Hz ack. */
-};
-
-extern volatile struct mac_oss *oss;
-extern int oss_present;
-
-#endif /* __ASSEMBLY__ */
+++ /dev/null
-/*
- * Apple Peripheral System Controller (PSC)
- *
- * The PSC is used on the AV Macs to control IO functions not handled
- * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
- * channels.
- *
- * The first seven DMA channels appear to be "one-shot" and are actually
- * sets of two channels; one member is active while the other is being
- * configured, and then you flip the active member and start all over again.
- * The one-shot channels are grouped together and are:
- *
- * 1. SCSI
- * 2. Ethernet Read
- * 3. Ethernet Write
- * 4. Floppy Disk Controller
- * 5. SCC Channel A Receive
- * 6. SCC Channel B Receive
- * 7. SCC Channel A Transmit
- *
- * The remaining two channels are handled somewhat differently. They appear
- * to be closely tied and share one set of registers. They also seem to run
- * continuously, although how you keep the buffer filled in this scenario is
- * not understood as there seems to be only one input and one output buffer
- * pointer.
- *
- * Much of this was extrapolated from what was known about the Ethernet
- * registers and subsequently confirmed using MacsBug (ie by pinging the
- * machine with easy-to-find patterns and looking for them in the DMA
- * buffers, or by sending a file over the serial ports and finding the
- * file in the buffers.)
- *
- * 1999-05-25 (jmt)
- */
-
-#define PSC_BASE (0x50F31000)
-
-/*
- * The IER/IFR registers work like the VIA, except that it has 4
- * of them each on different interrupt levels, and each register
- * set only seems to handle four interrupts instead of seven.
- *
- * To access a particular set of registers, add 0xn0 to the base
- * where n = 3,4,5 or 6.
- */
-
-#define pIFRbase 0x100
-#define pIERbase 0x104
-
-/*
- * One-shot DMA control registers
- */
-
-#define PSC_MYSTERY 0x804
-
-#define PSC_CTL_BASE 0xC00
-
-#define PSC_SCSI_CTL 0xC00
-#define PSC_ENETRD_CTL 0xC10
-#define PSC_ENETWR_CTL 0xC20
-#define PSC_FDC_CTL 0xC30
-#define PSC_SCCA_CTL 0xC40
-#define PSC_SCCB_CTL 0xC50
-#define PSC_SCCATX_CTL 0xC60
-
-/*
- * DMA channels. Add +0x10 for the second channel in the set.
- * You're supposed to use one channel while the other runs and
- * then flip channels and do the whole thing again.
- */
-
-#define PSC_ADDR_BASE 0x1000
-#define PSC_LEN_BASE 0x1004
-#define PSC_CMD_BASE 0x1008
-
-#define PSC_SET0 0x00
-#define PSC_SET1 0x10
-
-#define PSC_SCSI_ADDR 0x1000 /* confirmed */
-#define PSC_SCSI_LEN 0x1004 /* confirmed */
-#define PSC_SCSI_CMD 0x1008 /* confirmed */
-#define PSC_ENETRD_ADDR 0x1020 /* confirmed */
-#define PSC_ENETRD_LEN 0x1024 /* confirmed */
-#define PSC_ENETRD_CMD 0x1028 /* confirmed */
-#define PSC_ENETWR_ADDR 0x1040 /* confirmed */
-#define PSC_ENETWR_LEN 0x1044 /* confirmed */
-#define PSC_ENETWR_CMD 0x1048 /* confirmed */
-#define PSC_FDC_ADDR 0x1060 /* strongly suspected */
-#define PSC_FDC_LEN 0x1064 /* strongly suspected */
-#define PSC_FDC_CMD 0x1068 /* strongly suspected */
-#define PSC_SCCA_ADDR 0x1080 /* confirmed */
-#define PSC_SCCA_LEN 0x1084 /* confirmed */
-#define PSC_SCCA_CMD 0x1088 /* confirmed */
-#define PSC_SCCB_ADDR 0x10A0 /* confirmed */
-#define PSC_SCCB_LEN 0x10A4 /* confirmed */
-#define PSC_SCCB_CMD 0x10A8 /* confirmed */
-#define PSC_SCCATX_ADDR 0x10C0 /* confirmed */
-#define PSC_SCCATX_LEN 0x10C4 /* confirmed */
-#define PSC_SCCATX_CMD 0x10C8 /* confirmed */
-
-/*
- * Free-running DMA registers. The only part known for sure are the bits in
- * the control register, the buffer addresses and the buffer length. Everything
- * else is anybody's guess.
- *
- * These registers seem to be mirrored every thirty-two bytes up until offset
- * 0x300. It's safe to assume then that a new set of registers starts there.
- */
-
-#define PSC_SND_CTL 0x200 /*
- * [ 16-bit ]
- * Sound (Singer?) control register.
- *
- * bit 0 : ????
- * bit 1 : ????
- * bit 2 : Set to one to enable sound
- * output. Possibly a mute flag.
- * bit 3 : ????
- * bit 4 : ????
- * bit 5 : ????
- * bit 6 : Set to one to enable pass-thru
- * audio. In this mode the audio data
- * seems to appear in both the input
- * buffer and the output buffer.
- * bit 7 : Set to one to activate the
- * sound input DMA or zero to
- * disable it.
- * bit 8 : Set to one to activate the
- * sound output DMA or zero to
- * disable it.
- * bit 9 : \
- * bit 11 : |
- * These two bits control the sample
- * rate. Usually set to binary 10 and
- * MacOS 8.0 says I'm at 48 KHz. Using
- * a binary value of 01 makes things
- * sound about 1/2 speed (24 KHz?) and
- * binary 00 is slower still (22 KHz?)
- *
- * Setting this to 0x0000 is a good way to
- * kill all DMA at boot time so that the
- * PSC won't overwrite the kernel image
- * with sound data.
- */
-
-/*
- * 0x0202 - 0x0203 is unused. Writing there
- * seems to clobber the control register.
- */
-
-#define PSC_SND_SOURCE 0x204 /*
- * [ 32-bit ]
- * Controls input source and volume:
- *
- * bits 12-15 : input source volume, 0 - F
- * bits 16-19 : unknown, always 0x5
- * bits 20-23 : input source selection:
- * 0x3 = CD Audio
- * 0x4 = External Audio
- *
- * The volume is definitely not the general
- * output volume as it doesn't affect the
- * alert sound volume.
- */
-#define PSC_SND_STATUS1 0x208 /*
- * [ 32-bit ]
- * Appears to be a read-only status register.
- * The usual value is 0x00400002.
- */
-#define PSC_SND_HUH3 0x20C /*
- * [ 16-bit ]
- * Unknown 16-bit value, always 0x0000.
- */
-#define PSC_SND_BITS2GO 0x20E /*
- * [ 16-bit ]
- * Counts down to zero from some constant
- * value. The value appears to be the
- * number of _bits_ remaining before the
- * buffer is full, which would make sense
- * since Apple's docs say the sound DMA
- * channels are 1 bit wide.
- */
-#define PSC_SND_INADDR 0x210 /*
- * [ 32-bit ]
- * Address of the sound input DMA buffer
- */
-#define PSC_SND_OUTADDR 0x214 /*
- * [ 32-bit ]
- * Address of the sound output DMA buffer
- */
-#define PSC_SND_LEN 0x218 /*
- * [ 16-bit ]
- * Length of both buffers in eight-byte units.
- */
-#define PSC_SND_HUH4 0x21A /*
- * [ 16-bit ]
- * Unknown, always 0x0000.
- */
-#define PSC_SND_STATUS2 0x21C /*
- * [ 16-bit ]
- * Appears to e a read-only status register.
- * The usual value is 0x0200.
- */
-#define PSC_SND_HUH5 0x21E /*
- * [ 16-bit ]
- * Unknown, always 0x0000.
- */
-
-#ifndef __ASSEMBLY__
-
-extern volatile __u8 *psc;
-extern int psc_present;
-
-/*
- * Access functions
- */
-
-static inline void psc_write_byte(int offset, __u8 data)
-{
- *((volatile __u8 *)(psc + offset)) = data;
-}
-
-static inline void psc_write_word(int offset, __u16 data)
-{
- *((volatile __u16 *)(psc + offset)) = data;
-}
-
-static inline void psc_write_long(int offset, __u32 data)
-{
- *((volatile __u32 *)(psc + offset)) = data;
-}
-
-static inline u8 psc_read_byte(int offset)
-{
- return *((volatile __u8 *)(psc + offset));
-}
-
-static inline u16 psc_read_word(int offset)
-{
- return *((volatile __u16 *)(psc + offset));
-}
-
-static inline u32 psc_read_long(int offset)
-{
- return *((volatile __u32 *)(psc + offset));
-}
-
-#endif /* __ASSEMBLY__ */
+++ /dev/null
-/*
- * 6522 Versatile Interface Adapter (VIA)
- *
- * There are two of these on the Mac II. Some IRQ's are vectored
- * via them as are assorted bits and bobs - eg rtc, adb. The picture
- * is a bit incomplete as the Mac documentation doesn't cover this well
- */
-
-#ifndef _ASM_MAC_VIA_H_
-#define _ASM_MAC_VIA_H_
-
-/*
- * Base addresses for the VIAs. There are two in every machine,
- * although on some machines the second is an RBV or an OSS.
- * The OSS is different enough that it's handled separately.
- *
- * Do not use these values directly; use the via1 and via2 variables
- * instead (and don't forget to check rbv_present when using via2!)
- */
-
-#define VIA1_BASE (0x50F00000)
-#define VIA2_BASE (0x50F02000)
-#define RBV_BASE (0x50F26000)
-
-/*
- * Not all of these are true post MacII I think.
- * CSA: probably the ones CHRP marks as 'unused' change purposes
- * when the IWM becomes the SWIM.
- * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
- * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
- *
- * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
- * following changes for IIfx:
- * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
- * Also, "All of the functionality of VIA2 has been moved to other chips".
- */
-
-#define VIA1A_vSccWrReq 0x80 /* SCC write. (input)
- * [CHRP] SCC WREQ: Reflects the state of the
- * Wait/Request pins from the SCC.
- * [Macintosh Family Hardware]
- * as CHRP on SE/30,II,IIx,IIcx,IIci.
- * on IIfx, "0 means an active request"
- */
-#define VIA1A_vRev8 0x40 /* Revision 8 board ???
- * [CHRP] En WaitReqB: Lets the WaitReq_L
- * signal from port B of the SCC appear on
- * the PA7 input pin. Output.
- * [Macintosh Family] On the SE/30, this
- * is the bit to flip screen buffers.
- * 0=alternate, 1=main.
- * on II,IIx,IIcx,IIci,IIfx this is a bit
- * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
- */
-#define VIA1A_vHeadSel 0x20 /* Head select for IWM.
- * [CHRP] unused.
- * [Macintosh Family] "Floppy disk
- * state-control line SEL" on all but IIfx
- */
-#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx
- * this bit enables the "Overlay" address
- * map in the address decoders as it is on
- * reset for mapping the ROM over the reset
- * vector. 1=use overlay map.
- * On the IIci,IIfx it is another bit of the
- * CPU ID: 0=normal IIci, 1=IIci with parity
- * feature or IIfx.
- * [CHRP] En WaitReqA: Lets the WaitReq_L
- * signal from port A of the SCC appear
- * on the PA7 input pin (CHRP). Output.
- * [MkLinux] "Drive Select"
- * (with 0x20 being 'disk head select')
- */
-#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select:
- * 1: select the external serial clock to
- * drive the SCC's /RTxCA pin.
- * 0: Select the 3.6864MHz clock to drive
- * the SCC cell.
- * [Macintosh Family] Correct on all but IIfx
- */
-
-/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
- * on Macs which had the PWM sound hardware. Reserved on newer models.
- * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
- * bit 2: 1=IIci, 0=IIfx
- * bit 1: 1 on both IIci and IIfx.
- * MkLinux sez bit 0 is 'burnin flag' in this case.
- * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
- * inputs, these bits will read 0.
- */
-#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
-#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
-#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
-#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
-#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
-
-/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
- * CHRP offers no info. */
-#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with
- * PWM hardware) 0=enabled.
- * Also, on IIci w/parity, shows parity error
- * 0=error, 1=OK. */
-#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled
- * On SE/30, vertical sync interrupt enable.
- * 0=enabled. This vSync interrupt shows up
- * as a slot $E interrupt. */
-#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
-#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
-#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
-#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
-#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
-#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
-
-/* MkLinux defines the following "VIA1 Register B contents where they
- * differ from standard VIA1". From the naming scheme, we assume they
- * correspond to a VIA work-alike named 'EVR'. */
-#define EVRB_XCVR 0x08 /* XCVR_SESSION* */
-#define EVRB_FULL 0x10 /* VIA_FULL */
-#define EVRB_SYSES 0x20 /* SYS_SESSION */
-#define EVRB_AUXIE 0x00 /* Enable A/UX Interrupt Scheme */
-#define EVRB_AUXID 0x40 /* Disable A/UX Interrupt Scheme */
-#define EVRB_SFTWRIE 0x00 /* Software Interrupt ReQuest */
-#define EVRB_SFTWRID 0x80 /* Software Interrupt ReQuest */
-
-/*
- * VIA2 A register is the interrupt lines raised off the nubus
- * slots.
- * The below info is from 'Macintosh Family Hardware.'
- * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
- * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
- * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
- * Perhaps OSS uses vRAM1 and vRAM2 for ADB.
- */
-
-#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
-#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
-#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
-#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
-#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
-#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
-#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
-#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
-
-/* RAM size bits decoded as follows:
- * bit1 bit0 size of ICs in bank A
- * 0 0 256 kbit
- * 0 1 1 Mbit
- * 1 0 4 Mbit
- * 1 1 16 Mbit
- */
-
-/*
- * Register B has the fun stuff in it
- */
-
-#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by
- * timer T1.
- * on IIci, parity test: 0=test mode.
- * [MkLinux] RBV_PARODD: 1=odd,0=even. */
-#define VIA2B_vSndJck 0x40 /* External sound jack status.
- * 0=plug is inserted. On SE/30, always 0 */
-#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
-#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
-#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush
- * on II, AMU/PMMU control.
- * if AMU, 0=24bit to 32bit translation
- * if PMMU, 1=PMMU is accessing page table.
- * on SE/30 tied low.
- * on IIx,IIcx,IIfx, unused.
- * on IIci/RBV, cache control. 0=flush cache.
- */
-#define VIA2B_vPower 0x04 /* Power off, 0=shut off power.
- * on SE/30 this signal sent to PDS card. */
-#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked.
- * on SE/30 sent to PDS card. */
-#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card
- * on others, 0=disable processor's instruction
- * and data caches. */
-
-/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
- * Another example of a valid function that has no ROM support is the use
- * of the alternate video page for page-flipping animation. Since there
- * is no ROM call to flip pages, it is necessary to go play with the
- * right bit in the VIA chip (6522 Versatile Interface Adapter).
- * [CSA: don't know which one this is, but it's one of 'em!]
- */
-
-/*
- * 6522 registers - see databook.
- * CSA: Assignments for VIA1 confirmed from CHRP spec.
- */
-
-/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
-/* Note: 15 VIA regs, 8 RBV regs */
-
-#define vBufB 0x0000 /* [VIA/RBV] Register B */
-#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
-#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
-#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
-#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
-#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
-#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
-#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
-#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
-#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
-#define vSR 0x1400 /* [VIA only] Shift register. */
-#define vACR 0x1600 /* [VIA only] Auxilary control register. */
-#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
- /* CHRP sez never ever to *write* this.
- * Mac family says never to *change* this.
- * In fact we need to initialize it once at start. */
-#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
-#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
-#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
-
-/* The RBV only decodes the bottom eight address lines; the VIA doesn't
- * decode the bottom eight -- so vBufB | rBufB will always get you BufB */
-/* CSA: in fact, only bits 0,1, and 4 seem to be decoded.
- * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem
- * to matter. In fact *all* of the top 8 bits seem to matter;
- * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either.
- * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999]
- */
-
-#define rBufB 0x0000 /* [VIA/RBV] Register B */
-#define rExp 0x0001 /* [RBV only] RBV future expansion (always 0) */
-#define rSIFR 0x0002 /* [RBV only] RBV slot interrupts register. */
-#define rIFR 0x1a03 /* [VIA/RBV] RBV interrupt flag register. */
-#define rMonP 0x0010 /* [RBV only] RBV video monitor type. */
-#define rChpT 0x0011 /* [RBV only] RBV test mode register (reads as 0). */
-#define rSIER 0x0012 /* [RBV only] RBV slot interrupt enables. */
-#define rIER 0x1c13 /* [VIA/RBV] RBV interrupt flag enable register. */
-#define rBufA rSIFR /* the 'slot interrupts register' is BufA on a VIA */
-
-/*
- * Video monitor parameters, for rMonP:
- */
-#define RBV_DEPTH 0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */
-#define RBV_MONID 0x38 /* monitor type, as below. */
-#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */
-/* Supported monitor types: */
-#define MON_15BW (1<<3) /* 15" BW portrait. */
-#define MON_IIGS (2<<3) /* 12" color (modified IIGS monitor). */
-#define MON_15RGB (5<<3) /* 15" RGB portrait. */
-#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */
-#define MON_NONE (7<<3) /* No monitor attached. */
-
-/* To clarify IER manipulations */
-#define IER_SET_BIT(b) (0x80 | (1<<(b)) )
-#define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
-
-#ifndef __ASSEMBLY__
-
-extern volatile __u8 *via1,*via2;
-extern int rbv_present,via_alt_mapping;
-
-static inline int rbv_set_video_bpp(int bpp)
-{
- char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
- if (!rbv_present || val<0) return -1;
- via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
- return 0;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_MAC_VIA_H_ */
+++ /dev/null
-#ifndef _M68K_MACHDEP_H
-#define _M68K_MACHDEP_H
-
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-struct pt_regs;
-struct mktime;
-struct rtc_time;
-struct rtc_pll_info;
-struct buffer_head;
-
-extern void (*mach_sched_init) (irq_handler_t handler);
-/* machine dependent irq functions */
-extern void (*mach_init_IRQ) (void);
-extern void (*mach_get_model) (char *model);
-extern void (*mach_get_hardware_list) (struct seq_file *m);
-/* machine dependent timer functions */
-extern unsigned long (*mach_gettimeoffset)(void);
-extern int (*mach_hwclk)(int, struct rtc_time*);
-extern unsigned int (*mach_get_ss)(void);
-extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
-extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
-extern int (*mach_set_clock_mmss)(unsigned long);
-extern void (*mach_reset)( void );
-extern void (*mach_halt)( void );
-extern void (*mach_power_off)( void );
-extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
-extern void (*mach_hd_setup)(char *, int *);
-extern long mach_max_dma_address;
-extern void (*mach_heartbeat) (int);
-extern void (*mach_l2_flush) (int);
-extern void (*mach_beep) (unsigned int, unsigned int);
-
-#endif /* _M68K_MACHDEP_H */
+++ /dev/null
-/*
- * machines.h: Defines for taking apart the machine type value in the
- * idprom and determining the kind of machine we are on.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au)
- */
-#ifndef _SPARC_MACHINES_H
-#define _SPARC_MACHINES_H
-
-struct Sun_Machine_Models {
- char *name;
- unsigned char id_machtype;
-};
-
-/* Current number of machines we know about that has an IDPROM
- * machtype entry including one entry for the 0x80 OBP machines.
- */
-// reduced along with table in arch/m68k/sun3/idprom.c
-// sun3 port doesn't need to know about sparc machines.
-//#define NUM_SUN_MACHINES 23
-#define NUM_SUN_MACHINES 8
-
-/* The machine type in the idprom area looks like this:
- *
- * ---------------
- * | ARCH | MACH |
- * ---------------
- * 7 4 3 0
- *
- * The ARCH field determines the architecture line (sun4, sun4c, etc).
- * The MACH field determines the machine make within that architecture.
- */
-
-#define SM_ARCH_MASK 0xf0
-#define SM_SUN3 0x10
-#define SM_SUN4 0x20
-#define SM_SUN3X 0x40
-#define SM_SUN4C 0x50
-#define SM_SUN4M 0x70
-#define SM_SUN4M_OBP 0x80
-
-#define SM_TYP_MASK 0x0f
-/* Sun3 machines */
-#define SM_3_160 0x01 /* Sun 3/160 series */
-#define SM_3_50 0x02 /* Sun 3/50 series */
-#define SM_3_260 0x03 /* Sun 3/260 series */
-#define SM_3_110 0x04 /* Sun 3/110 series */
-#define SM_3_60 0x07 /* Sun 3/60 series */
-#define SM_3_E 0x08 /* Sun 3/E series */
-
-/* Sun3x machines */
-#define SM_3_460 0x01 /* Sun 3/460 (460,470,480) series */
-#define SM_3_80 0x02 /* Sun 3/80 series */
-
-/* Sun4 machines */
-#define SM_4_260 0x01 /* Sun 4/200 series */
-#define SM_4_110 0x02 /* Sun 4/100 series */
-#define SM_4_330 0x03 /* Sun 4/300 series */
-#define SM_4_470 0x04 /* Sun 4/400 series */
-
-/* Sun4c machines Full Name - PROM NAME */
-#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */
-#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */
-#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */
-#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */
-#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */
-#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */
-#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */
-
-/* Sun4m machines, these predate the OpenBoot. These values only mean
- * something if the value in the ARCH field is SM_SUN4M, if it is
- * SM_SUN4M_OBP then you have the following situation:
- * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
- * 2) You have to consult OpenBoot to determine which machine this is.
- */
-#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */
-#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */
-#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */
-
-/* Sun4d machines -- N/A */
-/* Sun4e machines -- N/A */
-/* Sun4u machines -- N/A */
-
-#endif /* !(_SPARC_MACHINES_H) */
+++ /dev/null
-/*
-** linux/machw.h -- This header defines some macros and pointers for
-** the various Macintosh custom hardware registers.
-**
-** Copyright 1997 by Michael Schmitz
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _ASM_MACHW_H_
-#define _ASM_MACHW_H_
-
-/*
- * head.S maps the videomem to VIDEOMEMBASE
- */
-
-#define VIDEOMEMBASE 0xf0000000
-#define VIDEOMEMSIZE (4096*1024)
-#define VIDEOMEMMASK (-4096*1024)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-#if 0
-/*
-** SCC Z8530
-*/
-
-#define MAC_SCC_BAS (0x50F04000)
-struct MAC_SCC
- {
- u_char cha_a_ctrl;
- u_char char_dummy1;
- u_char cha_a_data;
- u_char char_dummy2;
- u_char cha_b_ctrl;
- u_char char_dummy3;
- u_char cha_b_data;
- };
-# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* linux/machw.h */
+++ /dev/null
-#ifndef __ASM_MACINTOSH_H
-#define __ASM_MACINTOSH_H
-
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-/*
- * Apple Macintoshisms
- */
-
-extern void mac_reset(void);
-extern void mac_poweroff(void);
-extern void mac_init_IRQ(void);
-extern int mac_irq_pending(unsigned int);
-
-/*
- * Floppy driver magic hook - probably shouldnt be here
- */
-
-extern void via1_set_head(int);
-
-/*
- * Macintosh Table
- */
-
-struct mac_model
-{
- short ident;
- char *name;
- char adb_type;
- char via_type;
- char scsi_type;
- char ide_type;
- char scc_type;
- char ether_type;
- char nubus_type;
-};
-
-#define MAC_ADB_NONE 0
-#define MAC_ADB_II 1
-#define MAC_ADB_IISI 2
-#define MAC_ADB_CUDA 3
-#define MAC_ADB_PB1 4
-#define MAC_ADB_PB2 5
-#define MAC_ADB_IOP 6
-
-#define MAC_VIA_II 1
-#define MAC_VIA_IIci 2
-#define MAC_VIA_QUADRA 3
-
-#define MAC_SCSI_NONE 0
-#define MAC_SCSI_OLD 1
-#define MAC_SCSI_QUADRA 2
-#define MAC_SCSI_QUADRA2 3
-#define MAC_SCSI_QUADRA3 4
-
-#define MAC_IDE_NONE 0
-#define MAC_IDE_QUADRA 1
-#define MAC_IDE_PB 2
-#define MAC_IDE_BABOON 3
-
-#define MAC_SCC_II 1
-#define MAC_SCC_IOP 2
-#define MAC_SCC_QUADRA 3
-#define MAC_SCC_PSC 4
-
-#define MAC_ETHER_NONE 0
-#define MAC_ETHER_SONIC 1
-#define MAC_ETHER_MACE 2
-
-#define MAC_NO_NUBUS 0
-#define MAC_NUBUS 1
-
-/*
- * Gestalt numbers
- */
-
-#define MAC_MODEL_II 6
-#define MAC_MODEL_IIX 7
-#define MAC_MODEL_IICX 8
-#define MAC_MODEL_SE30 9
-#define MAC_MODEL_IICI 11
-#define MAC_MODEL_IIFX 13 /* And well numbered it is too */
-#define MAC_MODEL_IISI 18
-#define MAC_MODEL_LC 19
-#define MAC_MODEL_Q900 20
-#define MAC_MODEL_PB170 21
-#define MAC_MODEL_Q700 22
-#define MAC_MODEL_CLII 23 /* aka: P200 */
-#define MAC_MODEL_PB140 25
-#define MAC_MODEL_Q950 26 /* aka: WGS95 */
-#define MAC_MODEL_LCIII 27 /* aka: P450 */
-#define MAC_MODEL_PB210 29
-#define MAC_MODEL_C650 30
-#define MAC_MODEL_PB230 32
-#define MAC_MODEL_PB180 33
-#define MAC_MODEL_PB160 34
-#define MAC_MODEL_Q800 35 /* aka: WGS80 */
-#define MAC_MODEL_Q650 36
-#define MAC_MODEL_LCII 37 /* aka: P400/405/410/430 */
-#define MAC_MODEL_PB250 38
-#define MAC_MODEL_IIVI 44
-#define MAC_MODEL_P600 45 /* aka: P600CD */
-#define MAC_MODEL_IIVX 48
-#define MAC_MODEL_CCL 49 /* aka: P250 */
-#define MAC_MODEL_PB165C 50
-#define MAC_MODEL_C610 52 /* aka: WGS60 */
-#define MAC_MODEL_Q610 53
-#define MAC_MODEL_PB145 54 /* aka: PB145B */
-#define MAC_MODEL_P520 56 /* aka: LC520 */
-#define MAC_MODEL_C660 60
-#define MAC_MODEL_P460 62 /* aka: LCIII+, P466/P467 */
-#define MAC_MODEL_PB180C 71
-#define MAC_MODEL_PB520 72 /* aka: PB520C, PB540, PB540C, PB550C */
-#define MAC_MODEL_PB270C 77
-#define MAC_MODEL_Q840 78
-#define MAC_MODEL_P550 80 /* aka: LC550, P560 */
-#define MAC_MODEL_CCLII 83 /* aka: P275 */
-#define MAC_MODEL_PB165 84
-#define MAC_MODEL_PB190 85 /* aka: PB190CS */
-#define MAC_MODEL_TV 88
-#define MAC_MODEL_P475 89 /* aka: LC475, P476 */
-#define MAC_MODEL_P475F 90 /* aka: P475 w/ FPU (no LC040) */
-#define MAC_MODEL_P575 92 /* aka: LC575, P577/P578 */
-#define MAC_MODEL_Q605 94
-#define MAC_MODEL_Q605_ACC 95 /* Q605 accelerated to 33 MHz */
-#define MAC_MODEL_Q630 98 /* aka: LC630, P630/631/635/636/637/638/640 */
-#define MAC_MODEL_P588 99 /* aka: LC580, P580 */
-#define MAC_MODEL_PB280 102
-#define MAC_MODEL_PB280C 103
-#define MAC_MODEL_PB150 115
-
-extern struct mac_model *macintosh_config;
-
-#endif
+++ /dev/null
-/*
-** macints.h -- Macintosh Linux interrupt handling structs and prototypes
-**
-** Copyright 1997 by Michael Schmitz
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _ASM_MACINTS_H_
-#define _ASM_MACINTS_H_
-
-#include <asm/irq.h>
-
-/* Setting this prints debugging info for unclaimed interrupts */
-
-#define DEBUG_SPURIOUS
-
-/* Setting this prints debugging info on each autovector interrupt */
-
-/* #define DEBUG_IRQS */
-
-/* Setting this prints debugging info on each Nubus interrupt */
-
-/* #define DEBUG_NUBUS_INT */
-
-/* Setting this prints debugging info on irqs as they enabled and disabled. */
-
-/* #define DEBUG_IRQUSE */
-
-/*
- * Base IRQ number for all Mac68K interrupt sources. Each source
- * has eight indexes (base -> base+7).
- */
-
-#define VIA1_SOURCE_BASE 8
-#define VIA2_SOURCE_BASE 16
-#define MAC_SCC_SOURCE_BASE 24
-#define PSC3_SOURCE_BASE 24
-#define PSC4_SOURCE_BASE 32
-#define PSC5_SOURCE_BASE 40
-#define PSC6_SOURCE_BASE 48
-#define NUBUS_SOURCE_BASE 56
-#define BABOON_SOURCE_BASE 64
-
-/*
- * Maximum IRQ number is BABOON_SOURCE_BASE + 7,
- * giving us IRQs up through 71
- */
-
-#define NUM_MAC_SOURCES 72
-
-/*
- * clean way to separate IRQ into its source and index
- */
-
-#define IRQ_SRC(irq) (irq >> 3)
-#define IRQ_IDX(irq) (irq & 7)
-
-/* VIA1 interrupts */
-#define IRQ_VIA1_0 (8) /* one second int. */
-#define IRQ_VIA1_1 (9) /* VBlank int. */
-#define IRQ_MAC_VBL IRQ_VIA1_1
-#define IRQ_VIA1_2 (10) /* ADB SR shifts complete */
-#define IRQ_MAC_ADB IRQ_VIA1_2
-#define IRQ_MAC_ADB_SR IRQ_VIA1_2
-#define IRQ_VIA1_3 (11) /* ADB SR CB2 ?? */
-#define IRQ_MAC_ADB_SD IRQ_VIA1_3
-#define IRQ_VIA1_4 (12) /* ADB SR ext. clock pulse */
-#define IRQ_MAC_ADB_CL IRQ_VIA1_4
-#define IRQ_VIA1_5 (13)
-#define IRQ_MAC_TIMER_2 IRQ_VIA1_5
-#define IRQ_VIA1_6 (14)
-#define IRQ_MAC_TIMER_1 IRQ_VIA1_6
-#define IRQ_VIA1_7 (15)
-
-/* VIA2/RBV interrupts */
-#define IRQ_VIA2_0 (16)
-#define IRQ_MAC_SCSIDRQ IRQ_VIA2_0
-#define IRQ_VIA2_1 (17)
-#define IRQ_MAC_NUBUS IRQ_VIA2_1
-#define IRQ_VIA2_2 (18)
-#define IRQ_VIA2_3 (19)
-#define IRQ_MAC_SCSI IRQ_VIA2_3
-#define IRQ_VIA2_4 (20)
-#define IRQ_VIA2_5 (21)
-#define IRQ_VIA2_6 (22)
-#define IRQ_VIA2_7 (23)
-
-/* Level 3 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC3_0 (24)
-#define IRQ_MAC_MACE IRQ_PSC3_0
-#define IRQ_PSC3_1 (25)
-#define IRQ_PSC3_2 (26)
-#define IRQ_PSC3_3 (27)
-
-/* Level 4 (SCC) interrupts */
-#define IRQ_SCC (32)
-#define IRQ_SCCA (33)
-#define IRQ_SCCB (34)
-#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */
-/* SCC interrupts */
-#define IRQ_SCCB_TX (32)
-#define IRQ_SCCB_STAT (33)
-#define IRQ_SCCB_RX (34)
-#define IRQ_SCCB_SPCOND (35)
-#define IRQ_SCCA_TX (36)
-#define IRQ_SCCA_STAT (37)
-#define IRQ_SCCA_RX (38)
-#define IRQ_SCCA_SPCOND (39)
-#endif
-
-/* Level 4 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC4_0 (32)
-#define IRQ_PSC4_1 (33)
-#define IRQ_PSC4_2 (34)
-#define IRQ_PSC4_3 (35)
-#define IRQ_MAC_MACE_DMA IRQ_PSC4_3
-
-/* Level 5 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC5_0 (40)
-#define IRQ_PSC5_1 (41)
-#define IRQ_PSC5_2 (42)
-#define IRQ_PSC5_3 (43)
-
-/* Level 6 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC6_0 (48)
-#define IRQ_PSC6_1 (49)
-#define IRQ_PSC6_2 (50)
-#define IRQ_PSC6_3 (51)
-
-/* Nubus interrupts (cascaded to VIA2) */
-#define IRQ_NUBUS_9 (56)
-#define IRQ_NUBUS_A (57)
-#define IRQ_NUBUS_B (58)
-#define IRQ_NUBUS_C (59)
-#define IRQ_NUBUS_D (60)
-#define IRQ_NUBUS_E (61)
-#define IRQ_NUBUS_F (62)
-
-/* Baboon interrupts (cascaded to nubus slot $C) */
-#define IRQ_BABOON_0 (64)
-#define IRQ_BABOON_1 (65)
-#define IRQ_BABOON_2 (66)
-#define IRQ_BABOON_3 (67)
-
-#define SLOT2IRQ(x) (x + 47)
-#define IRQ2SLOT(x) (x - 47)
-
-#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */
-#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */
-
-#endif /* asm/macints.h */
+++ /dev/null
-#ifndef _ASM_M68K_SETUP_H
-#define _ASM_M68K_SETUP_H
-
-#include <asm/setup.h>
-#include <linux/linkage.h>
-
-/* Status Register bits */
-
-/* accrued exception bits */
-#define FPSR_AEXC_INEX 3
-#define FPSR_AEXC_DZ 4
-#define FPSR_AEXC_UNFL 5
-#define FPSR_AEXC_OVFL 6
-#define FPSR_AEXC_IOP 7
-
-/* exception status bits */
-#define FPSR_EXC_INEX1 8
-#define FPSR_EXC_INEX2 9
-#define FPSR_EXC_DZ 10
-#define FPSR_EXC_UNFL 11
-#define FPSR_EXC_OVFL 12
-#define FPSR_EXC_OPERR 13
-#define FPSR_EXC_SNAN 14
-#define FPSR_EXC_BSUN 15
-
-/* quotient byte, assumes big-endian, of course */
-#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
-
-/* condition code bits */
-#define FPSR_CC_NAN 24
-#define FPSR_CC_INF 25
-#define FPSR_CC_Z 26
-#define FPSR_CC_NEG 27
-
-
-/* Control register bits */
-
-/* rounding mode */
-#define FPCR_ROUND_RN 0 /* round to nearest/even */
-#define FPCR_ROUND_RZ 1 /* round to zero */
-#define FPCR_ROUND_RM 2 /* minus infinity */
-#define FPCR_ROUND_RP 3 /* plus infinity */
-
-/* rounding precision */
-#define FPCR_PRECISION_X 0 /* long double */
-#define FPCR_PRECISION_S 1 /* double */
-#define FPCR_PRECISION_D 2 /* float */
-
-
-/* Flags to select the debugging output */
-#define PDECODE 0
-#define PEXECUTE 1
-#define PCONV 2
-#define PNORM 3
-#define PREGISTER 4
-#define PINSTR 5
-#define PUNIMPL 6
-#define PMOVEM 7
-
-#define PMDECODE (1<<PDECODE)
-#define PMEXECUTE (1<<PEXECUTE)
-#define PMCONV (1<<PCONV)
-#define PMNORM (1<<PNORM)
-#define PMREGISTER (1<<PREGISTER)
-#define PMINSTR (1<<PINSTR)
-#define PMUNIMPL (1<<PUNIMPL)
-#define PMMOVEM (1<<PMOVEM)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-union fp_mant64 {
- unsigned long long m64;
- unsigned long m32[2];
-};
-
-union fp_mant128 {
- unsigned long long m64[2];
- unsigned long m32[4];
-};
-
-/* internal representation of extended fp numbers */
-struct fp_ext {
- unsigned char lowmant;
- unsigned char sign;
- unsigned short exp;
- union fp_mant64 mant;
-};
-
-/* C representation of FPU registers */
-/* NOTE: if you change this, you have to change the assembler offsets
- below and the size in <asm/fpu.h>, too */
-struct fp_data {
- struct fp_ext fpreg[8];
- unsigned int fpcr;
- unsigned int fpsr;
- unsigned int fpiar;
- unsigned short prec;
- unsigned short rnd;
- struct fp_ext temp[2];
-};
-
-#ifdef FPU_EMU_DEBUG
-extern unsigned int fp_debugprint;
-
-#define dprint(bit, fmt, args...) ({ \
- if (fp_debugprint & (1 << (bit))) \
- printk(fmt, ## args); \
-})
-#else
-#define dprint(bit, fmt, args...)
-#endif
-
-#define uprint(str) ({ \
- static int __count = 3; \
- \
- if (__count > 0) { \
- printk("You just hit an unimplemented " \
- "fpu instruction (%s)\n", str); \
- printk("Please report this to ....\n"); \
- __count--; \
- } \
-})
-
-#define FPDATA ((struct fp_data *)current->thread.fp)
-
-#else /* __ASSEMBLY__ */
-
-#define FPDATA %a2
-
-/* offsets from the base register to the floating point data in the task struct */
-#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0)
-#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96)
-#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100)
-#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104)
-#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108)
-#define FPD_RND (TASK_THREAD+THREAD_FPREG+110)
-#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112)
-#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124)
-#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136)
-
-/* offsets on the stack to access saved registers,
- * these are only used during instruction decoding
- * where we always know how deep we're on the stack.
- */
-#define FPS_DO (PT_D0)
-#define FPS_D1 (PT_D1)
-#define FPS_D2 (PT_D2)
-#define FPS_A0 (PT_A0)
-#define FPS_A1 (PT_A1)
-#define FPS_A2 (PT_A2)
-#define FPS_SR (PT_SR)
-#define FPS_PC (PT_PC)
-#define FPS_EA (PT_PC+6)
-#define FPS_PC2 (PT_PC+10)
-
-.macro fp_get_fp_reg
- lea (FPD_FPREG,FPDATA,%d0.w*4),%a0
- lea (%a0,%d0.w*8),%a0
-.endm
-
-/* Macros used to get/put the current program counter.
- * 020/030 use a different stack frame then 040/060, for the
- * 040/060 the return pc points already to the next location,
- * so this only needs to be modified for jump instructions.
- */
-.macro fp_get_pc dest
- move.l (FPS_PC+4,%sp),\dest
-.endm
-
-.macro fp_put_pc src,jump=0
- move.l \src,(FPS_PC+4,%sp)
-.endm
-
-.macro fp_get_instr_data f,s,dest,label
- getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
- addq.l #\s,%sp@(FPS_PC+4)
-.endm
-
-.macro fp_get_instr_word dest,label,addr
- fp_get_instr_data w,2,\dest,\label,\addr
-.endm
-
-.macro fp_get_instr_long dest,label,addr
- fp_get_instr_data l,4,\dest,\label,\addr
-.endm
-
-/* These macros are used to read from/write to user space
- * on error we jump to the fixup section, load the fault
- * address into %a0 and jump to the exit.
- * (derived from <asm/uaccess.h>)
- */
-.macro getuser size,src,dest,label,addr
-| printf ,"[\size<%08x]",1,\addr
-.Lu1\@: moves\size \src,\dest
-
- .section .fixup,"ax"
- .even
-.Lu2\@: move.l \addr,%a0
- jra \label
- .previous
-
- .section __ex_table,"a"
- .align 4
- .long .Lu1\@,.Lu2\@
- .previous
-.endm
-
-.macro putuser size,src,dest,label,addr
-| printf ,"[\size>%08x]",1,\addr
-.Lu1\@: moves\size \src,\dest
-.Lu2\@:
-
- .section .fixup,"ax"
- .even
-.Lu3\@: move.l \addr,%a0
- jra \label
- .previous
-
- .section __ex_table,"a"
- .align 4
- .long .Lu1\@,.Lu3\@
- .long .Lu2\@,.Lu3\@
- .previous
-.endm
-
-/* work around binutils idiocy */
-old_gas=-1
-.irp gas_ident.x .x
-old_gas=old_gas+1
-.endr
-.if !old_gas
-.irp m b,w,l
-.macro getuser.\m src,dest,label,addr
- getuser .\m,\src,\dest,\label,\addr
-.endm
-.macro putuser.\m src,dest,label,addr
- putuser .\m,\src,\dest,\label,\addr
-.endm
-.endr
-.endif
-
-.macro movestack nr,arg1,arg2,arg3,arg4,arg5
- .if \nr
- movestack (\nr-1),\arg2,\arg3,\arg4,\arg5
- move.l \arg1,-(%sp)
- .endif
-.endm
-
-.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
-#ifdef FPU_EMU_DEBUG
- .data
-.Lpdata\@:
- .string "\string"
- .previous
-
- movem.l %d0/%d1/%a0/%a1,-(%sp)
- .if \bit+1
-#if 0
- moveq #\bit,%d0
- andw #7,%d0
- btst %d0,fp_debugprint+((31-\bit)/8)
-#else
- btst #\bit,fp_debugprint+((31-\bit)/8)
-#endif
- jeq .Lpskip\@
- .endif
- movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5
- pea .Lpdata\@
- jsr printk
- lea ((\nr+1)*4,%sp),%sp
-.Lpskip\@:
- movem.l (%sp)+,%d0/%d1/%a0/%a1
-#endif
-.endm
-
-.macro printx bit,fp
-#ifdef FPU_EMU_DEBUG
- movem.l %d0/%a0,-(%sp)
- lea \fp,%a0
-#if 0
- moveq #'+',%d0
- tst.w (%a0)
- jeq .Lx1\@
- moveq #'-',%d0
-.Lx1\@: printf \bit," %c",1,%d0
- move.l (4,%a0),%d0
- bclr #31,%d0
- jne .Lx2\@
- printf \bit,"0."
- jra .Lx3\@
-.Lx2\@: printf \bit,"1."
-.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8)
- move.w (2,%a0),%d0
- ext.l %d0
- printf \bit,"E%04x",1,%d0
-#else
- printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
-#endif
- movem.l (%sp)+,%d0/%a0
-#endif
-.endm
-
-.macro debug instr,args
-#ifdef FPU_EMU_DEBUG
- \instr \args
-#endif
-.endm
-
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_M68K_SETUP_H */
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-
-#ifdef CONFIG_ATARI
-/* RTC in Atari machines */
-
-#include <asm/atarihw.h>
-
-#define RTC_PORT(x) (TT_RTC_BAS + 2*(x))
-#define RTC_ALWAYS_BCD 0
-
-#define CMOS_READ(addr) ({ \
-atari_outb_p((addr),RTC_PORT(0)); \
-atari_inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-atari_outb_p((addr),RTC_PORT(0)); \
-atari_outb_p((val),RTC_PORT(1)); \
-})
-#endif /* CONFIG_ATARI */
-
-#endif /* _ASM_MC146818RTC_H */
+++ /dev/null
-/*
- * md.h: High speed xor_block operation for RAID4/5
- *
- */
-
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT sizeof(long)
-
-#endif /* __ASM_MD_H */
+++ /dev/null
-#ifndef __M68K_MMAN_H__
-#define __M68K_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* __M68K_MMAN_H__ */
+++ /dev/null
-#ifndef __MMU_H
-#define __MMU_H
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_t;
-
-#endif
+++ /dev/null
-#ifndef __M68K_MMU_CONTEXT_H
-#define __M68K_MMU_CONTEXT_H
-
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifndef CONFIG_SUN3
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-
-static inline int init_new_context(struct task_struct *tsk,
- struct mm_struct *mm)
-{
- mm->context = virt_to_phys(mm->pgd);
- return 0;
-}
-
-#define destroy_context(mm) do { } while(0)
-
-static inline void switch_mm_0230(struct mm_struct *mm)
-{
- unsigned long crp[2] = {
- 0x80000000 | _PAGE_TABLE, mm->context
- };
- unsigned long tmp;
-
- asm volatile (".chip 68030");
-
- /* flush MC68030/MC68020 caches (they are virtually addressed) */
- asm volatile (
- "movec %%cacr,%0;"
- "orw %1,%0; "
- "movec %0,%%cacr"
- : "=d" (tmp) : "di" (FLUSH_I_AND_D));
-
- /* Switch the root pointer. For a 030-only kernel,
- * avoid flushing the whole ATC, we only need to
- * flush the user entries. The 68851 does this by
- * itself. Avoid a runtime check here.
- */
- asm volatile (
-#ifdef CPU_M68030_ONLY
- "pmovefd %0,%%crp; "
- "pflush #0,#4"
-#else
- "pmove %0,%%crp"
-#endif
- : : "m" (crp[0]));
-
- asm volatile (".chip 68k");
-}
-
-static inline void switch_mm_0460(struct mm_struct *mm)
-{
- asm volatile (".chip 68040");
-
- /* flush address translation cache (user entries) */
- asm volatile ("pflushan");
-
- /* switch the root pointer */
- asm volatile ("movec %0,%%urp" : : "r" (mm->context));
-
- if (CPU_IS_060) {
- unsigned long tmp;
-
- /* clear user entries in the branch cache */
- asm volatile (
- "movec %%cacr,%0; "
- "orl %1,%0; "
- "movec %0,%%cacr"
- : "=d" (tmp): "di" (0x00200000));
- }
-
- asm volatile (".chip 68k");
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
- if (prev != next) {
- if (CPU_IS_020_OR_030)
- switch_mm_0230(next);
- else
- switch_mm_0460(next);
- }
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
- next_mm->context = virt_to_phys(next_mm->pgd);
-
- if (CPU_IS_020_OR_030)
- switch_mm_0230(next_mm);
- else
- switch_mm_0460(next_mm);
-}
-
-#else /* CONFIG_SUN3 */
-#include <asm/sun3mmu.h>
-#include <linux/sched.h>
-
-extern unsigned long get_free_context(struct mm_struct *mm);
-extern void clear_context(unsigned long context);
-
-/* set the context for a new task to unmapped */
-static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- mm->context = SUN3_INVALID_CONTEXT;
- return 0;
-}
-
-/* find the context given to this process, and if it hasn't already
- got one, go get one for it. */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
- if(mm->context == SUN3_INVALID_CONTEXT)
- mm->context = get_free_context(mm);
-}
-
-/* flush context if allocated... */
-static inline void destroy_context(struct mm_struct *mm)
-{
- if(mm->context != SUN3_INVALID_CONTEXT)
- clear_context(mm->context);
-}
-
-static inline void activate_context(struct mm_struct *mm)
-{
- get_mmu_context(mm);
- sun3_put_context(mm->context);
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
- activate_context(tsk->mm);
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
- activate_context(next_mm);
-}
-
-#endif
-#endif
+++ /dev/null
-#ifndef _ASM_M68K_MMZONE_H_
-#define _ASM_M68K_MMZONE_H_
-
-extern pg_data_t pg_data_map[];
-
-#define NODE_DATA(nid) (&pg_data_map[nid])
-#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map)
-
-#endif /* _ASM_M68K_MMZONE_H_ */
+++ /dev/null
-#ifndef _ASM_M68K_MODULE_H
-#define _ASM_M68K_MODULE_H
-
-struct mod_arch_specific {
- struct m68k_fixup_info *fixup_start, *fixup_end;
-};
-
-#define MODULE_ARCH_INIT { \
- .fixup_start = __start_fixup, \
- .fixup_end = __stop_fixup, \
-}
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-
-enum m68k_fixup_type {
- m68k_fixup_memoffset,
- m68k_fixup_vnode_shift,
-};
-
-struct m68k_fixup_info {
- enum m68k_fixup_type type;
- void *addr;
-};
-
-#define m68k_fixup(type, addr) \
- " .section \".m68k_fixup\",\"aw\"\n" \
- " .long " #type "," #addr "\n" \
- " .previous\n"
-
-extern struct m68k_fixup_info __start_fixup[], __stop_fixup[];
-
-struct module;
-extern void module_fixup(struct module *mod, struct m68k_fixup_info *start,
- struct m68k_fixup_info *end);
-
-#endif /* _ASM_M68K_MODULE_H */
+++ /dev/null
-#ifndef _MOTOROLA_PGALLOC_H
-#define _MOTOROLA_PGALLOC_H
-
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-
-extern pmd_t *get_pointer_table(void);
-extern int free_pointer_table(pmd_t *);
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
- pte_t *pte;
-
- pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
- if (pte) {
- __flush_page_to_ram(pte);
- flush_tlb_kernel_page(pte);
- nocache_page(pte);
- }
-
- return pte;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
- cache_page(pte);
- free_page((unsigned long) pte);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
- struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
- pte_t *pte;
-
- if(!page)
- return NULL;
-
- pte = kmap(page);
- if (pte) {
- __flush_page_to_ram(pte);
- flush_tlb_kernel_page(pte);
- nocache_page(pte);
- }
- kunmap(pte);
- pgtable_page_ctor(page);
- return page;
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t page)
-{
- pgtable_page_dtor(page);
- cache_page(kmap(page));
- kunmap(page);
- __free_page(page);
-}
-
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
-{
- pgtable_page_dtor(page);
- cache_page(kmap(page));
- kunmap(page);
- __free_page(page);
-}
-
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
- return get_pointer_table();
-}
-
-static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
- return free_pointer_table(pmd);
-}
-
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
-{
- return free_pointer_table(pmd);
-}
-
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- pmd_free(mm, (pmd_t *)pgd);
-}
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- return (pgd_t *)get_pointer_table();
-}
-
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
-{
- pmd_set(pmd, pte);
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
-{
- pmd_set(pmd, page_address(page));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
-{
- pgd_set(pgd, pmd);
-}
-
-#endif /* _MOTOROLA_PGALLOC_H */
+++ /dev/null
-#ifndef _MOTOROLA_PGTABLE_H
-#define _MOTOROLA_PGTABLE_H
-
-
-/*
- * Definitions for MMU descriptors
- */
-#define _PAGE_PRESENT 0x001
-#define _PAGE_SHORT 0x002
-#define _PAGE_RONLY 0x004
-#define _PAGE_ACCESSED 0x008
-#define _PAGE_DIRTY 0x010
-#define _PAGE_SUPER 0x080 /* 68040 supervisor only */
-#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */
-#define _PAGE_NOCACHE030 0x040 /* 68030 no-cache mode */
-#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */
-#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */
-#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */
-#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */
-
-#define _DESCTYPE_MASK 0x003
-
-#define _CACHEMASK040 (~0x060)
-#define _TABLE_MASK (0xfffffe00)
-
-#define _PAGE_TABLE (_PAGE_SHORT)
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE)
-
-#define _PAGE_PROTNONE 0x004
-#define _PAGE_FILE 0x008 /* pagecache or swap? */
-
-#ifndef __ASSEMBLY__
-
-/* This is the cache mode to be used for pages containing page descriptors for
- * processors >= '040. It is in pte_mknocache(), and the variable is defined
- * and initialized in head.S */
-extern int m68k_pgtable_cachemode;
-
-/* This is the cache mode for normal pages, for supervisor access on
- * processors >= '040. It is used in pte_mkcache(), and the variable is
- * defined and initialized in head.S */
-
-#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH)
-#define m68k_supervisor_cachemode _PAGE_CACHE040W
-#elif defined(CPU_M68040_OR_M68060_ONLY)
-#define m68k_supervisor_cachemode _PAGE_CACHE040
-#elif defined(CPU_M68020_OR_M68030_ONLY)
-#define m68k_supervisor_cachemode 0
-#else
-extern int m68k_supervisor_cachemode;
-#endif
-
-#if defined(CPU_M68040_OR_M68060_ONLY)
-#define mm_cachebits _PAGE_CACHE040
-#elif defined(CPU_M68020_OR_M68030_ONLY)
-#define mm_cachebits 0
-#else
-extern unsigned long mm_cachebits;
-#endif
-
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits)
-
-/* Alternate definitions that are compile time constants, for
- initializing protection_map. The cachebits are fixed later. */
-#define PAGE_NONE_C __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED_C __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
-#define PAGE_COPY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
-#define PAGE_READONLY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
-
-/*
- * The m68k can't do page protection for execute, and considers that the same are read.
- * Also, write permissions imply read permissions. This is the closest we can get..
- */
-#define __P000 PAGE_NONE_C
-#define __P001 PAGE_READONLY_C
-#define __P010 PAGE_COPY_C
-#define __P011 PAGE_COPY_C
-#define __P100 PAGE_READONLY_C
-#define __P101 PAGE_READONLY_C
-#define __P110 PAGE_COPY_C
-#define __P111 PAGE_COPY_C
-
-#define __S000 PAGE_NONE_C
-#define __S001 PAGE_READONLY_C
-#define __S010 PAGE_SHARED_C
-#define __S011 PAGE_SHARED_C
-#define __S100 PAGE_READONLY_C
-#define __S101 PAGE_READONLY_C
-#define __S110 PAGE_SHARED_C
-#define __S111 PAGE_SHARED_C
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
- return pte;
-}
-
-static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
-{
- unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED;
- unsigned long *ptr = pmdp->pmd;
- short i = 16;
- while (--i >= 0) {
- *ptr++ = ptbl;
- ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16);
- }
-}
-
-static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-{
- pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp);
-}
-
-#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK))
-#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK))
-#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK))
-
-
-#define pte_none(pte) (!pte_val(pte))
-#define pte_present(pte) (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,ptep) ({ pte_val(*(ptep)) = 0; })
-
-#define pte_page(pte) virt_to_page(__va(pte_val(pte)))
-#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_bad(pmd) ((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE)
-#define pmd_present(pmd) (pmd_val(pmd) & _PAGE_TABLE)
-#define pmd_clear(pmdp) ({ \
- unsigned long *__ptr = pmdp->pmd; \
- short __i = 16; \
- while (--__i >= 0) \
- *__ptr++ = 0; \
-})
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
-
-
-#define pgd_none(pgd) (!pgd_val(pgd))
-#define pgd_bad(pgd) ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE)
-#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_TABLE)
-#define pgd_clear(pgdp) ({ pgd_val(*pgdp) = 0; })
-#define pgd_page(pgd) (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT))
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return !(pte_val(pte) & _PAGE_RONLY); }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte) { return 0; }
-
-static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) |= _PAGE_RONLY; return pte; }
-static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) &= ~_PAGE_RONLY; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mknocache(pte_t pte)
-{
- pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode;
- return pte;
-}
-static inline pte_t pte_mkcache(pte_t pte)
-{
- pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode;
- return pte;
-}
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
-
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-
-/* to find an entry in a page-table-directory */
-static inline pgd_t *pgd_offset(const struct mm_struct *mm,
- unsigned long address)
-{
- return mm->pgd + pgd_index(address);
-}
-
-#define swapper_pg_dir kernel_pg_dir
-extern pgd_t kernel_pg_dir[128];
-
-static inline pgd_t *pgd_offset_k(unsigned long address)
-{
- return kernel_pg_dir + (address >> PGDIR_SHIFT);
-}
-
-
-/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
-{
- return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1));
-}
-
-/* Find an entry in the third-level page table.. */
-static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address)
-{
- return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1));
-}
-
-#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
-#define pte_unmap(pte) ((void)0)
-#define pte_unmap_nested(pte) ((void)0)
-
-/*
- * Allocate and free page tables. The xxx_kernel() versions are
- * used to allocate a kernel page table - this turns on ASN bits
- * if any.
- */
-
-/* Prior to calling these routines, the page should have been flushed
- * from both the cache and ATC, or the CPU might not notice that the
- * cache setting for the page has been changed. -jskov
- */
-static inline void nocache_page(void *vaddr)
-{
- unsigned long addr = (unsigned long)vaddr;
-
- if (CPU_IS_040_OR_060) {
- pgd_t *dir;
- pmd_t *pmdp;
- pte_t *ptep;
-
- dir = pgd_offset_k(addr);
- pmdp = pmd_offset(dir, addr);
- ptep = pte_offset_kernel(pmdp, addr);
- *ptep = pte_mknocache(*ptep);
- }
-}
-
-static inline void cache_page(void *vaddr)
-{
- unsigned long addr = (unsigned long)vaddr;
-
- if (CPU_IS_040_OR_060) {
- pgd_t *dir;
- pmd_t *pmdp;
- pte_t *ptep;
-
- dir = pgd_offset_k(addr);
- pmdp = pmd_offset(dir, addr);
- ptep = pte_offset_kernel(pmdp, addr);
- *ptep = pte_mkcache(*ptep);
- }
-}
-
-#define PTE_FILE_MAX_BITS 28
-
-static inline unsigned long pte_to_pgoff(pte_t pte)
-{
- return pte.pte >> 4;
-}
-
-static inline pte_t pgoff_to_pte(unsigned off)
-{
- pte_t pte = { (off << 4) + _PAGE_FILE };
- return pte;
-}
-
-/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
-#define __swp_type(x) (((x).val >> 4) & 0xff)
-#define __swp_offset(x) ((x).val >> 12)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _MOTOROLA_PGTABLE_H */
+++ /dev/null
-#ifndef __MOVS_H__
-#define __MOVS_H__
-
-/*
-** movs.h
-**
-** Inline assembly macros to generate movs & related instructions
-*/
-
-/* Set DFC register value */
-
-#define SET_DFC(x) \
- __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x));
-
-/* Get DFC register value */
-
-#define GET_DFC(x) \
- __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : );
-
-/* Set SFC register value */
-
-#define SET_SFC(x) \
- __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x));
-
-/* Get SFC register value */
-
-#define GET_SFC(x) \
- __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : );
-
-#define SET_VBR(x) \
- __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x));
-
-#define GET_VBR(x) \
- __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : );
-
-/* Set a byte using the "movs" instruction */
-
-#define SET_CONTROL_BYTE(addr,value) \
- __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr));
-
-/* Get a byte using the "movs" instruction */
-
-#define GET_CONTROL_BYTE(addr,value) \
- __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr));
-
-/* Set a (long)word using the "movs" instruction */
-
-#define SET_CONTROL_WORD(addr,value) \
- __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr));
-
-/* Get a (long)word using the "movs" instruction */
-
-#define GET_CONTROL_WORD(addr,value) \
- __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr));
-#endif
+++ /dev/null
-#ifndef _M68K_MSGBUF_H
-#define _M68K_MSGBUF_H
-
-/*
- * The msqid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _M68K_MSGBUF_H */
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-#ifndef _MVME147HW_H_
-#define _MVME147HW_H_
-
-#include <asm/irq.h>
-
-typedef struct {
- unsigned char
- ctrl,
- bcd_sec,
- bcd_min,
- bcd_hr,
- bcd_dow,
- bcd_dom,
- bcd_mth,
- bcd_year;
-} MK48T02;
-
-#define RTC_WRITE 0x80
-#define RTC_READ 0x40
-#define RTC_STOP 0x20
-
-#define m147_rtc ((MK48T02 * volatile)0xfffe07f8)
-
-
-struct pcc_regs {
- volatile u_long dma_tadr;
- volatile u_long dma_dadr;
- volatile u_long dma_bcr;
- volatile u_long dma_hr;
- volatile u_short t1_preload;
- volatile u_short t1_count;
- volatile u_short t2_preload;
- volatile u_short t2_count;
- volatile u_char t1_int_cntrl;
- volatile u_char t1_cntrl;
- volatile u_char t2_int_cntrl;
- volatile u_char t2_cntrl;
- volatile u_char ac_fail;
- volatile u_char watchdog;
- volatile u_char lpt_intr;
- volatile u_char lpt_cntrl;
- volatile u_char dma_intr;
- volatile u_char dma_cntrl;
- volatile u_char bus_error;
- volatile u_char dma_status;
- volatile u_char abort;
- volatile u_char ta_fnctl;
- volatile u_char serial_cntrl;
- volatile u_char general_cntrl;
- volatile u_char lan_cntrl;
- volatile u_char general_status;
- volatile u_char scsi_interrupt;
- volatile u_char slave;
- volatile u_char soft1_cntrl;
- volatile u_char int_base;
- volatile u_char soft2_cntrl;
- volatile u_char revision_level;
- volatile u_char lpt_data;
- volatile u_char lpt_status;
- };
-
-#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000)
-
-
-#define PCC_INT_ENAB 0x08
-
-#define PCC_TIMER_INT_CLR 0x80
-#define PCC_TIMER_PRELOAD 63936l
-
-#define PCC_LEVEL_ABORT 0x07
-#define PCC_LEVEL_SERIAL 0x04
-#define PCC_LEVEL_ETH 0x04
-#define PCC_LEVEL_TIMER1 0x04
-#define PCC_LEVEL_SCSI_PORT 0x04
-#define PCC_LEVEL_SCSI_DMA 0x04
-
-#define PCC_IRQ_AC_FAIL (IRQ_USER+0)
-#define PCC_IRQ_BERR (IRQ_USER+1)
-#define PCC_IRQ_ABORT (IRQ_USER+2)
-/* #define PCC_IRQ_SERIAL (IRQ_USER+3) */
-#define PCC_IRQ_PRINTER (IRQ_USER+7)
-#define PCC_IRQ_TIMER1 (IRQ_USER+8)
-#define PCC_IRQ_TIMER2 (IRQ_USER+9)
-#define PCC_IRQ_SOFTWARE1 (IRQ_USER+10)
-#define PCC_IRQ_SOFTWARE2 (IRQ_USER+11)
-
-
-#define M147_SCC_A_ADDR 0xfffe3002
-#define M147_SCC_B_ADDR 0xfffe3000
-#define M147_SCC_PCLK 5000000
-
-#define MVME147_IRQ_SCSI_PORT (IRQ_USER+0x45)
-#define MVME147_IRQ_SCSI_DMA (IRQ_USER+0x46)
-
-/* SCC interrupts, for MVME147 */
-
-#define MVME147_IRQ_TYPE_PRIO 0
-#define MVME147_IRQ_SCC_BASE (IRQ_USER+32)
-#define MVME147_IRQ_SCCB_TX (IRQ_USER+32)
-#define MVME147_IRQ_SCCB_STAT (IRQ_USER+34)
-#define MVME147_IRQ_SCCB_RX (IRQ_USER+36)
-#define MVME147_IRQ_SCCB_SPCOND (IRQ_USER+38)
-#define MVME147_IRQ_SCCA_TX (IRQ_USER+40)
-#define MVME147_IRQ_SCCA_STAT (IRQ_USER+42)
-#define MVME147_IRQ_SCCA_RX (IRQ_USER+44)
-#define MVME147_IRQ_SCCA_SPCOND (IRQ_USER+46)
-
-#define MVME147_LANCE_BASE 0xfffe1800
-#define MVME147_LANCE_IRQ (IRQ_USER+4)
-
-#define ETHERNET_ADDRESS 0xfffe0778
-
-#endif
+++ /dev/null
-#ifndef _M68K_MVME16xHW_H_
-#define _M68K_MVME16xHW_H_
-
-#include <asm/irq.h>
-
-/* Board ID data structure - pointer to this retrieved from Bug by head.S */
-
-/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */
-
-extern long mvme_bdid_ptr;
-
-typedef struct {
- char bdid[4];
- u_char rev, mth, day, yr;
- u_short size, reserved;
- u_short brdno;
- char brdsuffix[2];
- u_long options;
- u_short clun, dlun, ctype, dnum;
- u_long option2;
-} t_bdid, *p_bdid;
-
-
-typedef struct {
- u_char ack_icr,
- flt_icr,
- sel_icr,
- pe_icr,
- bsy_icr,
- spare1,
- isr,
- cr,
- spare2,
- spare3,
- spare4,
- data;
-} MVMElp, *MVMElpPtr;
-
-#define MVME_LPR_BASE 0xfff42030
-
-#define mvmelp ((*(volatile MVMElpPtr)(MVME_LPR_BASE)))
-
-typedef struct {
- unsigned char
- ctrl,
- bcd_sec,
- bcd_min,
- bcd_hr,
- bcd_dow,
- bcd_dom,
- bcd_mth,
- bcd_year;
-} MK48T08_t, *MK48T08ptr_t;
-
-#define RTC_WRITE 0x80
-#define RTC_READ 0x40
-#define RTC_STOP 0x20
-
-#define MVME_RTC_BASE 0xfffc1ff8
-
-#define MVME_I596_BASE 0xfff46000
-
-#define MVME_SCC_A_ADDR 0xfff45005
-#define MVME_SCC_B_ADDR 0xfff45001
-#define MVME_SCC_PCLK 10000000
-
-#define MVME162_IRQ_TYPE_PRIO 0
-
-#define MVME167_IRQ_PRN (IRQ_USER+20)
-#define MVME16x_IRQ_I596 (IRQ_USER+23)
-#define MVME16x_IRQ_SCSI (IRQ_USER+21)
-#define MVME16x_IRQ_FLY (IRQ_USER+63)
-#define MVME167_IRQ_SER_ERR (IRQ_USER+28)
-#define MVME167_IRQ_SER_MODEM (IRQ_USER+29)
-#define MVME167_IRQ_SER_TX (IRQ_USER+30)
-#define MVME167_IRQ_SER_RX (IRQ_USER+31)
-#define MVME16x_IRQ_TIMER (IRQ_USER+25)
-#define MVME167_IRQ_ABORT (IRQ_USER+46)
-#define MVME162_IRQ_ABORT (IRQ_USER+30)
-
-/* SCC interrupts, for MVME162 */
-#define MVME162_IRQ_SCC_BASE (IRQ_USER+0)
-#define MVME162_IRQ_SCCB_TX (IRQ_USER+0)
-#define MVME162_IRQ_SCCB_STAT (IRQ_USER+2)
-#define MVME162_IRQ_SCCB_RX (IRQ_USER+4)
-#define MVME162_IRQ_SCCB_SPCOND (IRQ_USER+6)
-#define MVME162_IRQ_SCCA_TX (IRQ_USER+8)
-#define MVME162_IRQ_SCCA_STAT (IRQ_USER+10)
-#define MVME162_IRQ_SCCA_RX (IRQ_USER+12)
-#define MVME162_IRQ_SCCA_SPCOND (IRQ_USER+14)
-
-/* MVME162 version register */
-
-#define MVME162_VERSION_REG 0xfff4202e
-
-extern unsigned short mvme16x_config;
-
-/* Lower 8 bits must match the revision register in the MC2 chip */
-
-#define MVME16x_CONFIG_SPEED_32 0x0001
-#define MVME16x_CONFIG_NO_VMECHIP2 0x0002
-#define MVME16x_CONFIG_NO_SCSICHIP 0x0004
-#define MVME16x_CONFIG_NO_ETHERNET 0x0008
-#define MVME16x_CONFIG_GOT_FPU 0x0010
-
-#define MVME16x_CONFIG_GOT_LP 0x0100
-#define MVME16x_CONFIG_GOT_CD2401 0x0200
-#define MVME16x_CONFIG_GOT_SCCA 0x0400
-#define MVME16x_CONFIG_GOT_SCCB 0x0800
-
-#endif
+++ /dev/null
-#ifndef _ASM_M68K_NUBUS_H
-#define _ASM_M68K_NUBUS_H
-
-#include <asm/raw_io.h>
-
-#define nubus_readb raw_inb
-#define nubus_readw raw_inw
-#define nubus_readl raw_inl
-
-#define nubus_writeb raw_outb
-#define nubus_writew raw_outw
-#define nubus_writel raw_outl
-
-#define nubus_memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define nubus_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define nubus_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-static inline void *nubus_remap_nocache_ser(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-
-static inline void *nubus_remap_nocache_nonser(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
-}
-
-static inline void *nbus_remap_writethrough(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-
-static inline void *nubus_remap_fullcache(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-#define nubus_unmap iounmap
-#define nubus_iounmap iounmap
-#define nubus_ioremap nubus_remap_nocache_ser
-
-#endif /* _ASM_NUBUS_H */
+++ /dev/null
-#ifndef __SPARC_OPENPROM_H
-#define __SPARC_OPENPROM_H
-
-/* openprom.h: Prom structures and defines for access to the OPENBOOT
- * prom routines and data areas.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-
-/* Empirical constants... */
-#ifdef CONFIG_SUN3
-#define KADB_DEBUGGER_BEGVM 0x0fee0000 /* There is no kadb yet but...*/
-#define LINUX_OPPROM_BEGVM 0x0fef0000
-#define LINUX_OPPROM_ENDVM 0x0ff10000 /* I think this is right - tm */
-#else
-#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */
-#define LINUX_OPPROM_BEGVM 0xffd00000
-#define LINUX_OPPROM_ENDVM 0xfff00000
-#define LINUX_OPPROM_MAGIC 0x10010407
-#endif
-
-#ifndef __ASSEMBLY__
-/* V0 prom device operations. */
-struct linux_dev_v0_funcs {
- int (*v0_devopen)(char *device_str);
- int (*v0_devclose)(int dev_desc);
- int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
- int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
- int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
- int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
- int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
- int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
- int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
-};
-
-/* V2 and later prom device operations. */
-struct linux_dev_v2_funcs {
- int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */
- char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
- void (*v2_dumb_mem_free)(char *va, unsigned sz);
-
- /* To map devices into virtual I/O space. */
- char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
- void (*v2_dumb_munmap)(char *virta, unsigned size);
-
- int (*v2_dev_open)(char *devpath);
- void (*v2_dev_close)(int d);
- int (*v2_dev_read)(int d, char *buf, int nbytes);
- int (*v2_dev_write)(int d, char *buf, int nbytes);
- int (*v2_dev_seek)(int d, int hi, int lo);
-
- /* Never issued (multistage load support) */
- void (*v2_wheee2)(void);
- void (*v2_wheee3)(void);
-};
-
-struct linux_mlist_v0 {
- struct linux_mlist_v0 *theres_more;
- char *start_adr;
- unsigned num_bytes;
-};
-
-struct linux_mem_v0 {
- struct linux_mlist_v0 **v0_totphys;
- struct linux_mlist_v0 **v0_prommap;
- struct linux_mlist_v0 **v0_available; /* What we can use */
-};
-
-/* Arguments sent to the kernel from the boot prompt. */
-struct linux_arguments_v0 {
- char *argv[8];
- char args[100];
- char boot_dev[2];
- int boot_dev_ctrl;
- int boot_dev_unit;
- int dev_partition;
- char *kernel_file_name;
- void *aieee1; /* XXX */
-};
-
-/* V2 and up boot things. */
-struct linux_bootargs_v2 {
- char **bootpath;
- char **bootargs;
- int *fd_stdin;
- int *fd_stdout;
-};
-
-#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-struct linux_romvec {
- char *pv_initsp;
- int (*pv_startmon)(void);
-
- int *diagberr;
-
- struct linux_arguments_v0 **pv_v0bootargs;
- unsigned *pv_sun3mem;
-
- unsigned char (*pv_getchar)(void);
- int (*pv_putchar)(int ch);
- int (*pv_nbgetchar)(void);
- int (*pv_nbputchar)(int ch);
- unsigned char *pv_echo;
- unsigned char *pv_insource;
- unsigned char *pv_outsink;
-
- int (*pv_getkey)(void);
- int (*pv_initgetkey)(void);
- unsigned int *pv_translation;
- unsigned char *pv_keybid;
- int *pv_screen_x;
- int *pv_screen_y;
- struct keybuf *pv_keybuf;
-
- char *pv_monid;
-
- /*
- * Frame buffer output and terminal emulation
- */
-
- int (*pv_fbwritechar)(char);
- int *pv_fbaddr;
- char **pv_font;
- int (*pv_fbwritestr)(char);
-
- void (*pv_reboot)(char *bootstr);
-
- /*
- * Line input and parsing
- */
-
- unsigned char *pv_linebuf;
- unsigned char **pv_lineptr;
- int *pv_linesize;
- int (*pv_getline)(void);
- unsigned char (*pv_getnextchar)(void);
- unsigned char (*pv_peeknextchar)(void);
- int *pv_fbthere;
- int (*pv_getnum)(void);
-
- void (*pv_printf)(const char *fmt, ...);
- int (*pv_printhex)(void);
-
- unsigned char *pv_leds;
- int (*pv_setleds)(void);
-
- /*
- * Non-maskable interrupt (nmi) information
- */
-
- int (*pv_nmiaddr)(void);
- int (*pv_abortentry)(void);
- int *pv_nmiclock;
-
- int *pv_fbtype;
-
- /*
- * Assorted other things
- */
-
- unsigned pv_romvers;
- struct globram *pv_globram;
- char *pv_kbdzscc;
-
- int *pv_keyrinit;
- unsigned char *pv_keyrtick;
- unsigned *pv_memoryavail;
- long *pv_resetaddr;
- long *pv_resetmap;
-
- void (*pv_halt)(void);
- unsigned char *pv_memorybitmap;
-
-#ifdef CONFIG_SUN3
- void (*pv_setctxt)(int ctxt, char *va, int pmeg);
- void (*pv_vector_cmd)(void);
- int dummy1z;
- int dummy2z;
- int dummy3z;
- int dummy4z;
-#endif
-};
-#else
-/* The top level PROM vector. */
-struct linux_romvec {
- /* Version numbers. */
- unsigned int pv_magic_cookie;
- unsigned int pv_romvers;
- unsigned int pv_plugin_revision;
- unsigned int pv_printrev;
-
- /* Version 0 memory descriptors. */
- struct linux_mem_v0 pv_v0mem;
-
- /* Node operations. */
- struct linux_nodeops *pv_nodeops;
-
- char **pv_bootstr;
- struct linux_dev_v0_funcs pv_v0devops;
-
- char *pv_stdin;
- char *pv_stdout;
-#define PROMDEV_KBD 0 /* input from keyboard */
-#define PROMDEV_SCREEN 0 /* output to screen */
-#define PROMDEV_TTYA 1 /* in/out to ttya */
-#define PROMDEV_TTYB 2 /* in/out to ttyb */
-
- /* Blocking getchar/putchar. NOT REENTRANT! (grr) */
- int (*pv_getchar)(void);
- void (*pv_putchar)(int ch);
-
- /* Non-blocking variants. */
- int (*pv_nbgetchar)(void);
- int (*pv_nbputchar)(int ch);
-
- void (*pv_putstr)(char *str, int len);
-
- /* Miscellany. */
- void (*pv_reboot)(char *bootstr);
- void (*pv_printf)(__const__ char *fmt, ...);
- void (*pv_abort)(void);
- __volatile__ int *pv_ticks;
- void (*pv_halt)(void);
- void (**pv_synchook)(void);
-
- /* Evaluate a forth string, not different proto for V0 and V2->up. */
- union {
- void (*v0_eval)(int len, char *str);
- void (*v2_eval)(char *str);
- } pv_fortheval;
-
- struct linux_arguments_v0 **pv_v0bootargs;
-
- /* Get ether address. */
- unsigned int (*pv_enaddr)(int d, char *enaddr);
-
- struct linux_bootargs_v2 pv_v2bootargs;
- struct linux_dev_v2_funcs pv_v2devops;
-
- int filler[15];
-
- /* This one is sun4c/sun4 only. */
- void (*pv_setctxt)(int ctxt, char *va, int pmeg);
-
- /* Prom version 3 Multiprocessor routines. This stuff is crazy.
- * No joke. Calling these when there is only one cpu probably
- * crashes the machine, have to test this. :-)
- */
-
- /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
- * 'thiscontext' executing at address 'prog_counter'
- */
- int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
- int thiscontext, char *prog_counter);
-
- /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
- * until a resume cpu call is made.
- */
- int (*v3_cpustop)(unsigned int whichcpu);
-
- /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
- * resume cpu call is made.
- */
- int (*v3_cpuidle)(unsigned int whichcpu);
-
- /* v3_cpuresume() will resume processor 'whichcpu' executing
- * starting with whatever 'pc' and 'npc' were left at the
- * last 'idle' or 'stop' call.
- */
- int (*v3_cpuresume)(unsigned int whichcpu);
-};
-#endif
-
-/* Routines for traversing the prom device tree. */
-struct linux_nodeops {
- int (*no_nextnode)(int node);
- int (*no_child)(int node);
- int (*no_proplen)(int node, char *name);
- int (*no_getprop)(int node, char *name, char *val);
- int (*no_setprop)(int node, char *name, char *val, int len);
- char * (*no_nextprop)(int node, char *name);
-};
-
-/* More fun PROM structures for device probing. */
-#define PROMREG_MAX 16
-#define PROMVADDR_MAX 16
-#define PROMINTR_MAX 15
-
-struct linux_prom_registers {
- int which_io; /* is this in OBIO space? */
- char *phys_addr; /* The physical address of this register */
- int reg_size; /* How many bytes does this register take up? */
-};
-
-struct linux_prom_irqs {
- int pri; /* IRQ priority */
- int vector; /* This is foobar, what does it do? */
-};
-
-/* Element of the "ranges" vector */
-struct linux_prom_ranges {
- unsigned int ot_child_space;
- unsigned int ot_child_base; /* Bus feels this */
- unsigned int ot_parent_space;
- unsigned int ot_parent_base; /* CPU looks from here */
- unsigned int or_size;
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_OPENPROM_H) */
+++ /dev/null
-/*
- * oplib.h: Describes the interface and available routines in the
- * Linux Prom library.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC_OPLIB_H
-#define __SPARC_OPLIB_H
-
-#include <asm/openprom.h>
-
-/* The master romvec pointer... */
-extern struct linux_romvec *romvec;
-
-/* Enumeration to describe the prom major version we have detected. */
-enum prom_major_version {
- PROM_V0, /* Original sun4c V0 prom */
- PROM_V2, /* sun4c and early sun4m V2 prom */
- PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */
- PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */
-};
-
-extern enum prom_major_version prom_vers;
-/* Revision, and firmware revision. */
-extern unsigned int prom_rev, prom_prev;
-
-/* Root node of the prom device tree, this stays constant after
- * initialization is complete.
- */
-extern int prom_root_node;
-
-/* Pointer to prom structure containing the device tree traversal
- * and usage utility functions. Only prom-lib should use these,
- * users use the interface defined by the library only!
- */
-extern struct linux_nodeops *prom_nodeops;
-
-/* The functions... */
-
-/* You must call prom_init() before using any of the library services,
- * preferably as early as possible. Pass it the romvec pointer.
- */
-extern void prom_init(struct linux_romvec *rom_ptr);
-
-/* Boot argument acquisition, returns the boot command line string. */
-extern char *prom_getbootargs(void);
-
-/* Device utilities. */
-
-/* Map and unmap devices in IO space at virtual addresses. Note that the
- * virtual address you pass is a request and the prom may put your mappings
- * somewhere else, so check your return value as that is where your new
- * mappings really are!
- *
- * Another note, these are only available on V2 or higher proms!
- */
-extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
-extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
-/* Machine memory configuration routine. */
-
-/* This function returns a V0 format memory descriptor table, it has three
- * entries. One for the total amount of physical ram on the machine, one
- * for the amount of physical ram available, and one describing the virtual
- * areas which are allocated by the prom. So, in a sense the physical
- * available is a calculation of the total physical minus the physical mapped
- * by the prom with virtual mappings.
- *
- * These lists are returned pre-sorted, this should make your life easier
- * since the prom itself is way too lazy to do such nice things.
- */
-extern struct linux_mem_v0 *prom_meminfo(void);
-
-/* Miscellaneous routines, don't really fit in any category per se. */
-
-/* Reboot the machine with the command line passed. */
-extern void prom_reboot(char *boot_command);
-
-/* Evaluate the forth string passed. */
-extern void prom_feval(char *forth_string);
-
-/* Enter the prom, with possibility of continuation with the 'go'
- * command in newer proms.
- */
-extern void prom_cmdline(void);
-
-/* Enter the prom, with no chance of continuation for the stand-alone
- * which calls this.
- */
-extern void prom_halt(void);
-
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
- */
-typedef void (*sync_func_t)(void);
-extern void prom_setsync(sync_func_t func_ptr);
-
-/* Acquire the IDPROM of the root node in the prom device tree. This
- * gets passed a buffer where you would like it stuffed. The return value
- * is the format type of this idprom or 0xff on error.
- */
-extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-
-/* Get the prom major version. */
-extern int prom_version(void);
-
-/* Get the prom plugin revision. */
-extern int prom_getrev(void);
-
-/* Get the prom firmware revision. */
-extern int prom_getprev(void);
-
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
-
-/* Prom's internal printf routine, don't use in kernel/boot code. */
-void prom_printf(char *fmt, ...);
-
-/* Query for input device type */
-
-enum prom_input_device {
- PROMDEV_IKBD, /* input from keyboard */
- PROMDEV_ITTYA, /* input from ttya */
- PROMDEV_ITTYB, /* input from ttyb */
- PROMDEV_I_UNK,
-};
-
-extern enum prom_input_device prom_query_input_device(void);
-
-/* Query for output device type */
-
-enum prom_output_device {
- PROMDEV_OSCREEN, /* to screen */
- PROMDEV_OTTYA, /* to ttya */
- PROMDEV_OTTYB, /* to ttyb */
- PROMDEV_O_UNK,
-};
-
-extern enum prom_output_device prom_query_output_device(void);
-
-/* Multiprocessor operations... */
-
-/* Start the CPU with the given device tree node, context table, and context
- * at the passed program counter.
- */
-extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
- int context, char *program_counter);
-
-/* Stop the CPU with the passed device tree node. */
-extern int prom_stopcpu(int cpunode);
-
-/* Idle the CPU with the passed device tree node. */
-extern int prom_idlecpu(int cpunode);
-
-/* Re-Start the CPU with the passed device tree node. */
-extern int prom_restartcpu(int cpunode);
-
-/* PROM memory allocation facilities... */
-
-/* Allocated at possibly the given virtual address a chunk of the
- * indicated size.
- */
-extern char *prom_alloc(char *virt_hint, unsigned int size);
-
-/* Free a previously allocated chunk. */
-extern void prom_free(char *virt_addr, unsigned int size);
-
-/* Sun4/sun4c specific memory-management startup hook. */
-
-/* Map the passed segment in the given context at the passed
- * virtual address.
- */
-extern void prom_putsegment(int context, unsigned long virt_addr,
- int physical_segment);
-
-/* PROM device tree traversal functions... */
-
-/* Get the child node of the given node, or zero if no child exists. */
-extern int prom_getchild(int parent_node);
-
-/* Get the next sibling node of the given node, or zero if no further
- * siblings exist.
- */
-extern int prom_getsibling(int node);
-
-/* Get the length, at the passed node, of the given property type.
- * Returns -1 on error (ie. no such property at this node).
- */
-extern int prom_getproplen(int thisnode, char *property);
-
-/* Fetch the requested property using the given buffer. Returns
- * the number of bytes the prom put into your buffer or -1 on error.
- */
-extern int prom_getproperty(int thisnode, char *property,
- char *prop_buffer, int propbuf_size);
-
-/* Acquire an integer property. */
-extern int prom_getint(int node, char *property);
-
-/* Acquire an integer property, with a default value. */
-extern int prom_getintdefault(int node, char *property, int defval);
-
-/* Acquire a boolean property, 0=FALSE 1=TRUE. */
-extern int prom_getbool(int node, char *prop);
-
-/* Acquire a string property, null string on error. */
-extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
-
-/* Does the passed node have the given "name"? YES=1 NO=0 */
-extern int prom_nodematch(int thisnode, char *name);
-
-/* Search all siblings starting at the passed node for "name" matching
- * the given string. Returns the node on success, zero on failure.
- */
-extern int prom_searchsiblings(int node_start, char *name);
-
-/* Return the first property type, as a string, for the given node.
- * Returns a null string on error.
- */
-extern char *prom_firstprop(int node);
-
-/* Returns the next property after the passed property for the given
- * node. Returns null string on failure.
- */
-extern char *prom_nextprop(int node, char *prev_property);
-
-/* Returns 1 if the specified node has given property. */
-extern int prom_node_has_property(int node, char *property);
-
-/* Set the indicated property at the given node with the passed value.
- * Returns the number of bytes of your value that the prom took.
- */
-extern int prom_setprop(int node, char *prop_name, char *prop_value,
- int value_size);
-
-extern int prom_pathtoinode(char *path);
-extern int prom_inst2pkg(int);
-
-/* Dorking with Bus ranges... */
-
-/* Adjust reg values with the passed ranges. */
-extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
- struct linux_prom_ranges *rangep, int nranges);
-
-/* Adjust child ranges with the passed parent ranges. */
-extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges,
- struct linux_prom_ranges *pranges, int npranges);
-
-/* Apply promlib probed OBIO ranges to registers. */
-extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
-
-/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
-extern void prom_apply_generic_ranges(int node, int parent,
- struct linux_prom_registers *sbusregs, int nregs);
-
-
-#endif /* !(__SPARC_OPLIB_H) */
+++ /dev/null
-#ifndef _M68K_PAGE_H
-#define _M68K_PAGE_H
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#ifndef CONFIG_SUN3
-#define PAGE_SHIFT (12)
-#else
-#define PAGE_SHIFT (13)
-#endif
-#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#if PAGE_SHIFT < 13
-#define THREAD_SIZE (8192)
-#else
-#define THREAD_SIZE PAGE_SIZE
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-
-#include <asm/module.h>
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-/*
- * We don't need to check for alignment etc.
- */
-#ifdef CPU_M68040_OR_M68060_ONLY
-static inline void copy_page(void *to, void *from)
-{
- unsigned long tmp;
-
- __asm__ __volatile__("1:\t"
- ".chip 68040\n\t"
- "move16 %1@+,%0@+\n\t"
- "move16 %1@+,%0@+\n\t"
- ".chip 68k\n\t"
- "dbra %2,1b\n\t"
- : "=a" (to), "=a" (from), "=d" (tmp)
- : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1)
- );
-}
-
-static inline void clear_page(void *page)
-{
- unsigned long tmp;
- unsigned long *sp = page;
-
- *sp++ = 0;
- *sp++ = 0;
- *sp++ = 0;
- *sp++ = 0;
-
- __asm__ __volatile__("1:\t"
- ".chip 68040\n\t"
- "move16 %2@+,%0@+\n\t"
- ".chip 68k\n\t"
- "subqw #8,%2\n\t"
- "subqw #8,%2\n\t"
- "dbra %1,1b\n\t"
- : "=a" (sp), "=d" (tmp)
- : "a" (page), "0" (sp),
- "1" ((PAGE_SIZE - 16) / 16 - 1));
-}
-
-#else
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-#endif
-
-#define clear_user_page(addr, vaddr, page) \
- do { clear_page(addr); \
- flush_dcache_page(page); \
- } while (0)
-#define copy_user_page(to, from, vaddr, page) \
- do { copy_page(to, from); \
- flush_dcache_page(page); \
- } while (0)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long m68k_memoffset;
-
-#ifndef CONFIG_SUN3
-
-#define WANT_PAGE_VIRTUAL
-
-static inline unsigned long ___pa(void *vaddr)
-{
- unsigned long paddr;
- asm (
- "1: addl #0,%0\n"
- m68k_fixup(%c2, 1b+2)
- : "=r" (paddr)
- : "0" (vaddr), "i" (m68k_fixup_memoffset));
- return paddr;
-}
-#define __pa(vaddr) ___pa((void *)(vaddr))
-static inline void *__va(unsigned long paddr)
-{
- void *vaddr;
- asm (
- "1: subl #0,%0\n"
- m68k_fixup(%c2, 1b+2)
- : "=r" (vaddr)
- : "0" (paddr), "i" (m68k_fixup_memoffset));
- return vaddr;
-}
-
-#else /* !CONFIG_SUN3 */
-/* This #define is a horrible hack to suppress lots of warnings. --m */
-#define __pa(x) ___pa((unsigned long)(x))
-static inline unsigned long ___pa(unsigned long x)
-{
- if(x == 0)
- return 0;
- if(x >= PAGE_OFFSET)
- return (x-PAGE_OFFSET);
- else
- return (x+0x2000000);
-}
-
-static inline void *__va(unsigned long x)
-{
- if(x == 0)
- return (void *)0;
-
- if(x < 0x2000000)
- return (void *)(x+PAGE_OFFSET);
- else
- return (void *)(x-0x2000000);
-}
-#endif /* CONFIG_SUN3 */
-
-/*
- * NOTE: virtual isn't really correct, actually it should be the offset into the
- * memory node, but we have no highmem, so that works for now.
- * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
- * of the shifts unnecessary.
- */
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-
-extern int m68k_virt_to_node_shift;
-
-#ifdef CONFIG_SINGLE_MEMORY_CHUNK
-#define __virt_to_node(addr) (&pg_data_map[0])
-#else
-extern struct pglist_data *pg_data_table[];
-
-static inline __attribute_const__ int __virt_to_node_shift(void)
-{
- int shift;
-
- asm (
- "1: moveq #0,%0\n"
- m68k_fixup(%c1, 1b)
- : "=d" (shift)
- : "i" (m68k_fixup_vnode_shift));
- return shift;
-}
-
-#define __virt_to_node(addr) (pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()])
-#endif
-
-#define virt_to_page(addr) ({ \
- pfn_to_page(virt_to_pfn(addr)); \
-})
-#define page_to_virt(page) ({ \
- pfn_to_virt(page_to_pfn(page)); \
-})
-
-#define pfn_to_page(pfn) ({ \
- unsigned long __pfn = (pfn); \
- struct pglist_data *pgdat; \
- pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn)); \
- pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \
-})
-#define page_to_pfn(_page) ({ \
- struct page *__p = (_page); \
- struct pglist_data *pgdat; \
- pgdat = &pg_data_map[page_to_nid(__p)]; \
- ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \
-})
-
-#define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
-#define pfn_valid(pfn) virt_addr_valid(pfn_to_virt(pfn))
-
-#endif /* __ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/page.h>
-
-#endif /* _M68K_PAGE_H */
+++ /dev/null
-
-/* This handles the memory map.. */
-#ifndef CONFIG_SUN3
-#define PAGE_OFFSET_RAW 0x00000000
-#else
-#define PAGE_OFFSET_RAW 0x0E000000
-#endif
-
+++ /dev/null
-#ifndef _M68K_PARAM_H
-#define _M68K_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 8192
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _M68K_PARAM_H */
+++ /dev/null
-/*
- * parport.h: platform-specific PC-style parport initialisation
- *
- * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- *
- * RZ: for use with Q40 and other ISA machines
- */
-
-#ifndef _ASM_M68K_PARPORT_H
-#define _ASM_M68K_PARPORT_H 1
-
-#define insl(port,buf,len) isa_insb(port,buf,(len)<<2)
-#define outsl(port,buf,len) isa_outsb(port,buf,(len)<<2)
-
-/* no dma, or IRQ autoprobing */
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
- if (! (MACH_IS_Q40))
- return 0; /* count=0 */
- return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE);
-}
-
-#endif /* !(_ASM_M68K_PARPORT_H) */
+++ /dev/null
-#ifndef _ASM_M68K_PCI_H
-#define _ASM_M68K_PCI_H
-
-#include <asm-generic/pci-dma-compat.h>
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#endif /* _ASM_M68K_PCI_H */
+++ /dev/null
-#ifndef __ASM_M68K_PERCPU_H
-#define __ASM_M68K_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_M68K_PERCPU_H */
+++ /dev/null
-
-#ifndef M68K_PGALLOC_H
-#define M68K_PGALLOC_H
-
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <asm/setup.h>
-#include <asm/virtconvert.h>
-
-
-#ifdef CONFIG_SUN3
-#include <asm/sun3_pgalloc.h>
-#else
-#include <asm/motorola_pgalloc.h>
-#endif
-
-extern void m68k_setup_node(int node);
-
-#endif /* M68K_PGALLOC_H */
+++ /dev/null
-#ifndef _M68K_PGTABLE_H
-#define _M68K_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <linux/sched.h>
-#include <linux/threads.h>
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the m68k page table tree.
- */
-
-#include <asm/virtconvert.h>
-
-/* Certain architectures need to do special things when pte's
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) \
- do{ \
- *(pteptr) = (pteval); \
- } while(0)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#ifdef CONFIG_SUN3
-#define PMD_SHIFT 17
-#else
-#define PMD_SHIFT 22
-#endif
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#ifdef CONFIG_SUN3
-#define PGDIR_SHIFT 17
-#else
-#define PGDIR_SHIFT 25
-#endif
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: the m68k is configured as three-level,
- * so we do have PMD level physically.
- */
-#ifdef CONFIG_SUN3
-#define PTRS_PER_PTE 16
-#define PTRS_PER_PMD 1
-#define PTRS_PER_PGD 2048
-#else
-#define PTRS_PER_PTE 1024
-#define PTRS_PER_PMD 8
-#define PTRS_PER_PGD 128
-#endif
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
-
-/* Virtual address region for use by kernel_map() */
-#ifdef CONFIG_SUN3
-#define KMAP_START 0x0DC00000
-#define KMAP_END 0x0E000000
-#else
-#define KMAP_START 0xd0000000
-#define KMAP_END 0xf0000000
-#endif
-
-#ifndef CONFIG_SUN3
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET (8*1024*1024)
-#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END KMAP_START
-#else
-extern unsigned long vmalloc_end;
-#define VMALLOC_START 0x0f800000
-#define VMALLOC_END vmalloc_end
-#endif /* CONFIG_SUN3 */
-
-/* zero page used for uninitialized stuff */
-extern void *empty_zero_page;
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR (8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK (~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-/* 64-bit machines, beware! SRB. */
-#define SIZEOF_PTR_LOG2 2
-
-extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
-
-/*
- * The m68k doesn't have any external MMU info: the kernel page
- * tables contain all the necessary information. The Sun3 does, but
- * they are updated on demand.
- */
-static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#define kern_addr_valid(addr) (1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/* MMU-specific headers */
-
-#ifdef CONFIG_SUN3
-#include <asm/sun3_pgtable.h>
-#else
-#include <asm/motorola_pgtable.h>
-#endif
-
-#ifndef __ASSEMBLY__
-#include <asm-generic/pgtable.h>
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#ifdef SUN3_PAGE_NOCACHE
-# define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE
-#else
-# define __SUN3_PAGE_NOCACHE 0
-#endif
-#define pgprot_noncached(prot) \
- (MMU_IS_SUN3 \
- ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE)) \
- : ((MMU_IS_851 || MMU_IS_030) \
- ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030)) \
- : (MMU_IS_040 || MMU_IS_060) \
- ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
- : (prot)))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init() do { } while (0)
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _M68K_PGTABLE_H */
+++ /dev/null
-#ifndef __m68k_POLL_H
-#define __m68k_POLL_H
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 256
-
-#include <asm-generic/poll.h>
-
-#endif
+++ /dev/null
-#ifndef __ARCH_M68K_POSIX_TYPES_H
-#define __ARCH_M68K_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
- int val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) */
-
-#endif
+++ /dev/null
-/*
- * include/asm-m68k/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/thread_info.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-static inline unsigned long rdusp(void)
-{
- unsigned long usp;
-
- __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
- return usp;
-}
-
-static inline void wrusp(unsigned long usp)
-{
- __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#ifndef CONFIG_SUN3
-#define TASK_SIZE (0xF0000000UL)
-#else
-#define TASK_SIZE (0x0E000000UL)
-#endif
-
-#ifdef __KERNEL__
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#ifndef CONFIG_SUN3
-#define TASK_UNMAPPED_BASE 0xC0000000UL
-#else
-#define TASK_UNMAPPED_BASE 0x0A000000UL
-#endif
-#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned short sr; /* saved status register */
- unsigned short fs; /* saved fs (sfc, dfc) */
- unsigned long crp[2]; /* cpu root pointer */
- unsigned long esp0; /* points to SR of stack frame */
- unsigned long faddr; /* info about last fault */
- int signo, code;
- unsigned long fp[8*3];
- unsigned long fpcntl[3]; /* fp control regs */
- unsigned char fpstate[FPSTATESIZE]; /* floating point state */
- struct thread_info info;
-};
-
-#define INIT_THREAD { \
- .ksp = sizeof(init_stack) + (unsigned long) init_stack, \
- .sr = PS_S, \
- .fs = __KERNEL_DS, \
- .info = INIT_THREAD_INFO(init_task), \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
- unsigned long usp)
-{
- /* reads from user space */
- set_fs(USER_DS);
-
- regs->pc = pc;
- regs->sr &= ~0x2000;
- wrusp(usp);
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- (virt_addr_valid((tsk)->thread.esp0))) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#endif
+++ /dev/null
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1 0
-#define PT_D2 1
-#define PT_D3 2
-#define PT_D4 3
-#define PT_D5 4
-#define PT_D6 5
-#define PT_D7 6
-#define PT_A0 7
-#define PT_A1 8
-#define PT_A2 9
-#define PT_A3 10
-#define PT_A4 11
-#define PT_A5 12
-#define PT_A6 13
-#define PT_D0 14
-#define PT_USP 15
-#define PT_ORIG_D0 16
-#define PT_SR 17
-#define PT_PC 18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long d1;
- long d2;
- long d3;
- long d4;
- long d5;
- long a0;
- long a1;
- long a2;
- long d0;
- long orig_d0;
- long stkadj;
- unsigned short sr;
- unsigned long pc;
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long d6;
- unsigned long d7;
- unsigned long a3;
- unsigned long a4;
- unsigned long a5;
- unsigned long a6;
- unsigned long retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
+++ /dev/null
-/*
- * Q40 master Chip Control
- * RTC stuff merged for compactnes..
-*/
-
-#ifndef _Q40_MASTER_H
-#define _Q40_MASTER_H
-
-#include <asm/raw_io.h>
-
-
-#define q40_master_addr 0xff000000
-
-#define IIRQ_REG 0x0 /* internal IRQ reg */
-#define EIRQ_REG 0x4 /* external ... */
-#define KEYCODE_REG 0x1c /* value of received scancode */
-#define DISPLAY_CONTROL_REG 0x18
-#define FRAME_CLEAR_REG 0x24
-#define LED_REG 0x30
-
-#define Q40_LED_ON() master_outb(1,LED_REG)
-#define Q40_LED_OFF() master_outb(0,LED_REG)
-
-#define INTERRUPT_REG IIRQ_REG /* "native" ints */
-#define KEY_IRQ_ENABLE_REG 0x08 /**/
-#define KEYBOARD_UNLOCK_REG 0x20 /* clear kb int */
-
-#define SAMPLE_ENABLE_REG 0x14 /* generate SAMPLE ints */
-#define SAMPLE_RATE_REG 0x2c
-#define SAMPLE_CLEAR_REG 0x28
-#define SAMPLE_LOW 0x00
-#define SAMPLE_HIGH 0x01
-
-#define FRAME_RATE_REG 0x38 /* generate FRAME ints at 200 HZ rate */
-
-#if 0
-#define SER_ENABLE_REG 0x0c /* allow serial ints to be generated */
-#endif
-#define EXT_ENABLE_REG 0x10 /* ... rest of the ISA ints ... */
-
-
-#define master_inb(_reg_) in_8((unsigned char *)q40_master_addr+_reg_)
-#define master_outb(_b_,_reg_) out_8((unsigned char *)q40_master_addr+_reg_,_b_)
-
-/* RTC defines */
-
-#define Q40_RTC_BASE (0xff021ffc)
-
-#define Q40_RTC_YEAR (*(volatile unsigned char *)(Q40_RTC_BASE+0))
-#define Q40_RTC_MNTH (*(volatile unsigned char *)(Q40_RTC_BASE-4))
-#define Q40_RTC_DATE (*(volatile unsigned char *)(Q40_RTC_BASE-8))
-#define Q40_RTC_DOW (*(volatile unsigned char *)(Q40_RTC_BASE-12))
-#define Q40_RTC_HOUR (*(volatile unsigned char *)(Q40_RTC_BASE-16))
-#define Q40_RTC_MINS (*(volatile unsigned char *)(Q40_RTC_BASE-20))
-#define Q40_RTC_SECS (*(volatile unsigned char *)(Q40_RTC_BASE-24))
-#define Q40_RTC_CTRL (*(volatile unsigned char *)(Q40_RTC_BASE-28))
-
-/* some control bits */
-#define Q40_RTC_READ 64 /* prepare for reading */
-#define Q40_RTC_WRITE 128
-
-/* define some Q40 specific ints */
-#include "q40ints.h"
-
-/* misc defs */
-#define DAC_LEFT ((unsigned char *)0xff008000)
-#define DAC_RIGHT ((unsigned char *)0xff008004)
-
-#endif /* _Q40_MASTER_H */
+++ /dev/null
-/*
- * contains some Q40 related interrupt definitions
- */
-
-#define Q40_IRQ_MAX (34)
-
-#define Q40_IRQ_SAMPLE (34)
-#define Q40_IRQ_KEYBOARD (32)
-#define Q40_IRQ_FRAME (33)
-
-
-/* masks for interrupt regiosters*/
-/* internal, IIRQ_REG */
-#define Q40_IRQ_KEYB_MASK (2)
-#define Q40_IRQ_SER_MASK (1<<2)
-#define Q40_IRQ_FRAME_MASK (1<<3)
-#define Q40_IRQ_EXT_MASK (1<<4) /* is a EIRQ */
-/* eirq, EIRQ_REG */
-#define Q40_IRQ3_MASK (1)
-#define Q40_IRQ4_MASK (1<<1)
-#define Q40_IRQ5_MASK (1<<2)
-#define Q40_IRQ6_MASK (1<<3)
-#define Q40_IRQ7_MASK (1<<4)
-#define Q40_IRQ10_MASK (1<<5)
-#define Q40_IRQ14_MASK (1<<6)
-#define Q40_IRQ15_MASK (1<<7)
-
-extern unsigned long q40_probe_irq_on (void);
-extern int q40_probe_irq_off (unsigned long irqs);
+++ /dev/null
-/*
- * linux/include/asm-m68k/raw_io.h
- *
- * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace
- *
- */
-
-#ifndef _RAW_IO_H
-#define _RAW_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/types.h>
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void iounmap(void __iomem *addr);
-
-extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
- int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-#define in_8(addr) \
- ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
-#define in_be16(addr) \
- ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
-#define in_be32(addr) \
- ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
-#define in_le16(addr) \
- ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
-#define in_le32(addr) \
- ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
-
-#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
-#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
-#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
-#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
-#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
-
-#define raw_inb in_8
-#define raw_inw in_be16
-#define raw_inl in_be32
-#define __raw_readb in_8
-#define __raw_readw in_be16
-#define __raw_readl in_be32
-
-#define raw_outb(val,port) out_8((port),(val))
-#define raw_outw(val,port) out_be16((port),(val))
-#define raw_outl(val,port) out_be32((port),(val))
-#define __raw_writeb(val,addr) out_8((addr),(val))
-#define __raw_writew(val,addr) out_be16((addr),(val))
-#define __raw_writel(val,addr) out_be32((addr),(val))
-
-static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
-{
- unsigned int i;
-
- for (i = 0; i < len; i++)
- *buf++ = in_8(port);
-}
-
-static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf,
- unsigned int len)
-{
- unsigned int i;
-
- for (i = 0; i < len; i++)
- out_8(port, *buf++);
-}
-
-static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr)
-{
- unsigned int tmp;
-
- if (nr & 15) {
- tmp = (nr & 15) - 1;
- asm volatile (
- "1: movew %2@,%0@+; dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
- if (nr >> 4) {
- tmp = (nr >> 4) - 1;
- asm volatile (
- "1: "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "movew %2@,%0@+; "
- "dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
-}
-
-static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf,
- unsigned int nr)
-{
- unsigned int tmp;
-
- if (nr & 15) {
- tmp = (nr & 15) - 1;
- asm volatile (
- "1: movew %0@+,%2@; dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
- if (nr >> 4) {
- tmp = (nr >> 4) - 1;
- asm volatile (
- "1: "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "movew %0@+,%2@; "
- "dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
-}
-
-static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr)
-{
- unsigned int tmp;
-
- if (nr & 15) {
- tmp = (nr & 15) - 1;
- asm volatile (
- "1: movel %2@,%0@+; dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
- if (nr >> 4) {
- tmp = (nr >> 4) - 1;
- asm volatile (
- "1: "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "movel %2@,%0@+; "
- "dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
-}
-
-static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf,
- unsigned int nr)
-{
- unsigned int tmp;
-
- if (nr & 15) {
- tmp = (nr & 15) - 1;
- asm volatile (
- "1: movel %0@+,%2@; dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
- if (nr >> 4) {
- tmp = (nr >> 4) - 1;
- asm volatile (
- "1: "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "movel %0@+,%2@; "
- "dbra %1,1b"
- : "=a" (buf), "=d" (tmp)
- : "a" (port), "0" (buf),
- "1" (tmp));
- }
-}
-
-
-static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf,
- unsigned int nr)
-{
- if ((nr) % 8)
- __asm__ __volatile__
- ("\tmovel %0,%/a0\n\t"
- "movel %1,%/a1\n\t"
- "movel %2,%/d6\n\t"
- "subql #1,%/d6\n"
- "1:\tmovew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "dbra %/d6,1b"
- :
- : "g" (port), "g" (buf), "g" (nr)
- : "d0", "a0", "a1", "d6");
- else
- __asm__ __volatile__
- ("movel %0,%/a0\n\t"
- "movel %1,%/a1\n\t"
- "movel %2,%/d6\n\t"
- "lsrl #3,%/d6\n\t"
- "subql #1,%/d6\n"
- "1:\tmovew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "movew %/a0@,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a1@+\n\t"
- "dbra %/d6,1b"
- :
- : "g" (port), "g" (buf), "g" (nr)
- : "d0", "a0", "a1", "d6");
-}
-
-static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
- unsigned int nr)
-{
- if ((nr) % 8)
- __asm__ __volatile__
- ("movel %0,%/a0\n\t"
- "movel %1,%/a1\n\t"
- "movel %2,%/d6\n\t"
- "subql #1,%/d6\n"
- "1:\tmovew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "dbra %/d6,1b"
- :
- : "g" (port), "g" (buf), "g" (nr)
- : "d0", "a0", "a1", "d6");
- else
- __asm__ __volatile__
- ("movel %0,%/a0\n\t"
- "movel %1,%/a1\n\t"
- "movel %2,%/d6\n\t"
- "lsrl #3,%/d6\n\t"
- "subql #1,%/d6\n"
- "1:\tmovew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "movew %/a1@+,%/d0\n\t"
- "rolw #8,%/d0\n\t"
- "movew %/d0,%/a0@\n\t"
- "dbra %/d6,1b"
- :
- : "g" (port), "g" (buf), "g" (nr)
- : "d0", "a0", "a1", "d6");
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _RAW_IO_H */
+++ /dev/null
-#ifndef _M68K_RESOURCE_H
-#define _M68K_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _M68K_RESOURCE_H */
+++ /dev/null
-/* include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- */
-/* permission is hereby granted to copy, modify and redistribute this code
- * in terms of the GNU Library General Public License, Version 2 or later,
- * at your option.
- */
-
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-#include <asm/errno.h>
-#include <asm/machdep.h>
-
-#define RTC_PIE 0x40 /* periodic interrupt enable */
-#define RTC_AIE 0x20 /* alarm interrupt enable */
-#define RTC_UIE 0x10 /* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100 /* battery bad */
-#define RTC_SQWE 0x08 /* enable square-wave output */
-#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
-#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
- /*
- * Only the values that we read from the RTC are set. We leave
- * tm_wday, tm_yday and tm_isdst untouched. Even though the
- * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
- * by the RTC when initially set to a non-zero value.
- */
- mach_hwclk(0, time);
- return RTC_24H;
-}
-
-static inline int set_rtc_time(struct rtc_time *time)
-{
- return mach_hwclk(1, time);
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
- if (mach_get_ss)
- return mach_get_ss();
- else{
- struct rtc_time h;
-
- get_rtc_time(&h);
- return h.tm_sec;
- }
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
- if (mach_get_rtc_pll)
- return mach_get_rtc_pll(pll);
- else
- return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
- if (mach_set_rtc_pll)
- return mach_set_rtc_pll(pll);
- else
- return -EINVAL;
-}
-#endif /* __KERNEL__ */
-
-#endif /* _ASM__RTC_H */
+++ /dev/null
-/*
- * some sbus structures and macros to make usage of sbus drivers possible
- */
-
-#ifndef __M68K_SBUS_H
-#define __M68K_SBUS_H
-
-struct sbus_dev {
- struct {
- unsigned int which_io;
- unsigned int phys_addr;
- } reg_addrs[1];
-};
-
-/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
-/* No SBUS on the Sun3, kludge -- sam */
-
-static inline void _sbus_writeb(unsigned char val, unsigned long addr)
-{
- *(volatile unsigned char *)addr = val;
-}
-
-static inline unsigned char _sbus_readb(unsigned long addr)
-{
- return *(volatile unsigned char *)addr;
-}
-
-static inline void _sbus_writel(unsigned long val, unsigned long addr)
-{
- *(volatile unsigned long *)addr = val;
-
-}
-
-extern inline unsigned long _sbus_readl(unsigned long addr)
-{
- return *(volatile unsigned long *)addr;
-}
-
-
-#define sbus_readb(a) _sbus_readb((unsigned long)a)
-#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
-#define sbus_readl(a) _sbus_readl((unsigned long)a)
-#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
-
-#endif
+++ /dev/null
-#ifndef _M68K_SCATTERLIST_H
-#define _M68K_SCATTERLIST_H
-
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length;
-
- __u32 dma_address; /* A place to hang host-specific addresses at. */
-};
-
-/* This is bogus and should go away. */
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#endif /* !(_M68K_SCATTERLIST_H) */
+++ /dev/null
-#ifndef _ASM_M68K_SECTIONS_H
-#define _ASM_M68K_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* _ASM_M68K_SECTIONS_H */
+++ /dev/null
-#ifndef _M68K_SEGMENT_H
-#define _M68K_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA (1)
-#ifndef __USER_DS
-#define __USER_DS (USER_DATA)
-#endif
-#define USER_PROGRAM (2)
-#define SUPER_DATA (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
- mm_segment_t _v;
- __asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
-
- return _v;
-}
-
-static inline mm_segment_t get_ds(void)
-{
- /* return the supervisor data space code */
- return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
- __asm__ __volatile__ ("movec %0,%/sfc\n\t"
- "movec %0,%/dfc\n\t"
- : /* no outputs */ : "r" (val.seg) : "memory");
-}
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_SEGMENT_H */
+++ /dev/null
-#ifndef _M68K_SEMBUF_H
-#define _M68K_SEMBUF_H
-
-/*
- * The semid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _M68K_SEMBUF_H */
+++ /dev/null
-/*
- * include/asm-m68k/serial.h
- *
- * currently this seems useful only for a Q40,
- * it's an almost exact copy of ../asm-alpha/serial.h
- *
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
+++ /dev/null
-/*
-** asm/setup.h -- Definition of the Linux/m68k setup information
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 09/29/92 by Greg Harp
-**
-** 5/2/94 Roman Hodek:
-** Added bi_atari part of the machine dependent union bi_un; for now it
-** contains just a model field to distinguish between TT and Falcon.
-** 26/7/96 Roman Zippel:
-** Renamed to setup.h; added some useful macros to allow gcc some
-** optimizations if possible.
-** 5/10/96 Geert Uytterhoeven:
-** Redesign of the boot information structure; moved boot information
-** structure to bootinfo.h
-*/
-
-#ifndef _M68K_SETUP_H
-#define _M68K_SETUP_H
-
-
-
- /*
- * Linux/m68k Architectures
- */
-
-#define MACH_AMIGA 1
-#define MACH_ATARI 2
-#define MACH_MAC 3
-#define MACH_APOLLO 4
-#define MACH_SUN3 5
-#define MACH_MVME147 6
-#define MACH_MVME16x 7
-#define MACH_BVME6000 8
-#define MACH_HP300 9
-#define MACH_Q40 10
-#define MACH_SUN3X 11
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
-#define CL_SIZE COMMAND_LINE_SIZE
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_machtype;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_AMIGA)
-# define MACH_IS_AMIGA (0)
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
-#else
-# define MACH_AMIGA_ONLY
-# define MACH_IS_AMIGA (1)
-# define MACH_TYPE (MACH_AMIGA)
-#endif
-
-#if !defined(CONFIG_ATARI)
-# define MACH_IS_ATARI (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
-#else
-# define MACH_ATARI_ONLY
-# define MACH_IS_ATARI (1)
-# define MACH_TYPE (MACH_ATARI)
-#endif
-
-#if !defined(CONFIG_MAC)
-# define MACH_IS_MAC (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_MAC (m68k_machtype == MACH_MAC)
-#else
-# define MACH_MAC_ONLY
-# define MACH_IS_MAC (1)
-# define MACH_TYPE (MACH_MAC)
-#endif
-
-#if defined(CONFIG_SUN3)
-#define MACH_IS_SUN3 (1)
-#define MACH_SUN3_ONLY (1)
-#define MACH_TYPE (MACH_SUN3)
-#else
-#define MACH_IS_SUN3 (0)
-#endif
-
-#if !defined (CONFIG_APOLLO)
-# define MACH_IS_APOLLO (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
-#else
-# define MACH_APOLLO_ONLY
-# define MACH_IS_APOLLO (1)
-# define MACH_TYPE (MACH_APOLLO)
-#endif
-
-#if !defined (CONFIG_MVME147)
-# define MACH_IS_MVME147 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
-# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
-#else
-# define MACH_MVME147_ONLY
-# define MACH_IS_MVME147 (1)
-# define MACH_TYPE (MACH_MVME147)
-#endif
-
-#if !defined (CONFIG_MVME16x)
-# define MACH_IS_MVME16x (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
-#else
-# define MACH_MVME16x_ONLY
-# define MACH_IS_MVME16x (1)
-# define MACH_TYPE (MACH_MVME16x)
-#endif
-
-#if !defined (CONFIG_BVME6000)
-# define MACH_IS_BVME6000 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
-#else
-# define MACH_BVME6000_ONLY
-# define MACH_IS_BVME6000 (1)
-# define MACH_TYPE (MACH_BVME6000)
-#endif
-
-#if !defined (CONFIG_HP300)
-# define MACH_IS_HP300 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
-#else
-# define MACH_HP300_ONLY
-# define MACH_IS_HP300 (1)
-# define MACH_TYPE (MACH_HP300)
-#endif
-
-#if !defined (CONFIG_Q40)
-# define MACH_IS_Q40 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
-#else
-# define MACH_Q40_ONLY
-# define MACH_IS_Q40 (1)
-# define MACH_TYPE (MACH_Q40)
-#endif
-
-#if !defined (CONFIG_SUN3X)
-# define MACH_IS_SUN3X (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
- || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
-# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
-#else
-# define CONFIG_SUN3X_ONLY
-# define MACH_IS_SUN3X (1)
-# define MACH_TYPE (MACH_SUN3X)
-#endif
-
-#ifndef MACH_TYPE
-# define MACH_TYPE (m68k_machtype)
-#endif
-
-#endif /* __KERNEL__ */
-
-
- /*
- * CPU, FPU and MMU types
- *
- * Note: we may rely on the following equalities:
- *
- * CPU_68020 == MMU_68851
- * CPU_68030 == MMU_68030
- * CPU_68040 == FPU_68040 == MMU_68040
- * CPU_68060 == FPU_68060 == MMU_68060
- */
-
-#define CPUB_68020 0
-#define CPUB_68030 1
-#define CPUB_68040 2
-#define CPUB_68060 3
-
-#define CPU_68020 (1<<CPUB_68020)
-#define CPU_68030 (1<<CPUB_68030)
-#define CPU_68040 (1<<CPUB_68040)
-#define CPU_68060 (1<<CPUB_68060)
-
-#define FPUB_68881 0
-#define FPUB_68882 1
-#define FPUB_68040 2 /* Internal FPU */
-#define FPUB_68060 3 /* Internal FPU */
-#define FPUB_SUNFPA 4 /* Sun-3 FPA */
-
-#define FPU_68881 (1<<FPUB_68881)
-#define FPU_68882 (1<<FPUB_68882)
-#define FPU_68040 (1<<FPUB_68040)
-#define FPU_68060 (1<<FPUB_68060)
-#define FPU_SUNFPA (1<<FPUB_SUNFPA)
-
-#define MMUB_68851 0
-#define MMUB_68030 1 /* Internal MMU */
-#define MMUB_68040 2 /* Internal MMU */
-#define MMUB_68060 3 /* Internal MMU */
-#define MMUB_APOLLO 4 /* Custom Apollo */
-#define MMUB_SUN3 5 /* Custom Sun-3 */
-
-#define MMU_68851 (1<<MMUB_68851)
-#define MMU_68030 (1<<MMUB_68030)
-#define MMU_68040 (1<<MMUB_68040)
-#define MMU_68060 (1<<MMUB_68060)
-#define MMU_SUN3 (1<<MMUB_SUN3)
-#define MMU_APOLLO (1<<MMUB_APOLLO)
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_cputype;
-extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype;
-#ifdef CONFIG_VME
-extern unsigned long vme_brdtype;
-#endif
-
- /*
- * m68k_is040or060 is != 0 for a '040 or higher;
- * used numbers are 4 for 68040 and 6 for 68060.
- */
-
-extern int m68k_is040or060;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_M68020)
-# define CPU_IS_020 (0)
-# define MMU_IS_851 (0)
-# define MMU_IS_SUN3 (0)
-#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-# define CPU_IS_020 (m68k_cputype & CPU_68020)
-# define MMU_IS_851 (m68k_mmutype & MMU_68851)
-# define MMU_IS_SUN3 (0) /* Sun3 not supported with other CPU enabled */
-#else
-# define CPU_M68020_ONLY
-# define CPU_IS_020 (1)
-#ifdef MACH_SUN3_ONLY
-# define MMU_IS_SUN3 (1)
-# define MMU_IS_851 (0)
-#else
-# define MMU_IS_SUN3 (0)
-# define MMU_IS_851 (1)
-#endif
-#endif
-
-#if !defined(CONFIG_M68030)
-# define CPU_IS_030 (0)
-# define MMU_IS_030 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-# define CPU_IS_030 (m68k_cputype & CPU_68030)
-# define MMU_IS_030 (m68k_mmutype & MMU_68030)
-#else
-# define CPU_M68030_ONLY
-# define CPU_IS_030 (1)
-# define MMU_IS_030 (1)
-#endif
-
-#if !defined(CONFIG_M68040)
-# define CPU_IS_040 (0)
-# define MMU_IS_040 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
-# define CPU_IS_040 (m68k_cputype & CPU_68040)
-# define MMU_IS_040 (m68k_mmutype & MMU_68040)
-#else
-# define CPU_M68040_ONLY
-# define CPU_IS_040 (1)
-# define MMU_IS_040 (1)
-#endif
-
-#if !defined(CONFIG_M68060)
-# define CPU_IS_060 (0)
-# define MMU_IS_060 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
-# define CPU_IS_060 (m68k_cputype & CPU_68060)
-# define MMU_IS_060 (m68k_mmutype & MMU_68060)
-#else
-# define CPU_M68060_ONLY
-# define CPU_IS_060 (1)
-# define MMU_IS_060 (1)
-#endif
-
-#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
-# define CPU_IS_020_OR_030 (0)
-#else
-# define CPU_M68020_OR_M68030
-# if defined(CONFIG_M68040) || defined(CONFIG_M68060)
-# define CPU_IS_020_OR_030 (!m68k_is040or060)
-# else
-# define CPU_M68020_OR_M68030_ONLY
-# define CPU_IS_020_OR_030 (1)
-# endif
-#endif
-
-#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
-# define CPU_IS_040_OR_060 (0)
-#else
-# define CPU_M68040_OR_M68060
-# if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-# define CPU_IS_040_OR_060 (m68k_is040or060)
-# else
-# define CPU_M68040_OR_M68060_ONLY
-# define CPU_IS_040_OR_060 (1)
-# endif
-#endif
-
-#define CPU_TYPE (m68k_cputype)
-
-#ifdef CONFIG_M68KFPU_EMU
-# ifdef CONFIG_M68KFPU_EMU_ONLY
-# define FPU_IS_EMU (1)
-# else
-# define FPU_IS_EMU (!m68k_fputype)
-# endif
-#else
-# define FPU_IS_EMU (0)
-#endif
-
-
- /*
- * Miscellaneous
- */
-
-#define NUM_MEMINFO 4
-
-#ifndef __ASSEMBLY__
-struct mem_info {
- unsigned long addr; /* physical address of memory chunk */
- unsigned long size; /* length of memory chunk (in bytes) */
-};
-
-extern int m68k_num_memory; /* # of memory blocks found (and used) */
-extern int m68k_realnum_memory; /* real # of memory blocks found */
-extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SETUP_H */
+++ /dev/null
-#ifndef _M68K_SHM_H
-#define _M68K_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
- currently out in swap space (see also mm/swap.c):
- bits 0-1 (PAGE_PRESENT) is = 0
- bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
- bits 31..9 are used like this:
- bits 15..9 (SHM_ID) the id of the shared memory segment
- bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
- (actually only bits 25..16 get used since SHMMAX is so low)
- bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
- others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT 9
-#else
-#define SHM_ID_SHIFT 7
-#endif
-#define _SHM_ID_BITS 7
-#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS 15
-#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _M68K_SHM_H */
+++ /dev/null
-#ifndef _M68K_SHMBUF_H
-#define _M68K_SHMBUF_H
-
-/*
- * The shmid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _M68K_SHMBUF_H */
+++ /dev/null
-#ifndef _M68K_SHMPARAM_H
-#define _M68K_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _M68K_SHMPARAM_H */
+++ /dev/null
-#ifndef _ASM_M68k_SIGCONTEXT_H
-#define _ASM_M68k_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_d0;
- unsigned long sc_d1;
- unsigned long sc_a0;
- unsigned long sc_a1;
- unsigned short sc_sr;
- unsigned long sc_pc;
- unsigned short sc_formatvec;
- unsigned long sc_fpregs[2*3]; /* room for two fp registers */
- unsigned long sc_fpcntl[3];
- unsigned char sc_fpstate[216];
-};
-
-#endif
+++ /dev/null
-#ifndef _M68K_SIGINFO_H
-#define _M68K_SIGINFO_H
-
-#define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
-
-#include <asm-generic/siginfo.h>
-
-typedef struct siginfo {
- int si_signo;
- int si_errno;
- int si_code;
-
- union {
- int _pad[SI_PAD_SIZE];
-
- /* kill() */
- struct {
- __kernel_pid_t _pid; /* sender's pid */
- __kernel_uid_t _uid; /* backwards compatibility */
- __kernel_uid32_t _uid32; /* sender's uid */
- } _kill;
-
- /* POSIX.1b timers */
- struct {
- timer_t _tid; /* timer id */
- int _overrun; /* overrun count */
- char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
- sigval_t _sigval; /* same as below */
- int _sys_private; /* not to be passed to user */
- } _timer;
-
- /* POSIX.1b signals */
- struct {
- __kernel_pid_t _pid; /* sender's pid */
- __kernel_uid_t _uid; /* backwards compatibility */
- sigval_t _sigval;
- __kernel_uid32_t _uid32; /* sender's uid */
- } _rt;
-
- /* SIGCHLD */
- struct {
- __kernel_pid_t _pid; /* which child */
- __kernel_uid_t _uid; /* backwards compatibility */
- int _status; /* exit code */
- clock_t _utime;
- clock_t _stime;
- __kernel_uid32_t _uid32; /* sender's uid */
- } _sigchld;
-
- /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
- struct {
- void *_addr; /* faulting insn/memory ref. */
- } _sigfault;
-
- /* SIGPOLL */
- struct {
- int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
- int _fd;
- } _sigpoll;
- } _sifields;
-} siginfo_t;
-
-#define UID16_SIGINFO_COMPAT_NEEDED
-
-/*
- * How these fields are to be accessed.
- */
-#undef si_uid
-#ifdef __KERNEL__
-#define si_uid _sifields._kill._uid32
-#define si_uid16 _sifields._kill._uid
-#else
-#define si_uid _sifields._kill._uid
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
- if (from->si_code < 0)
- memcpy(to, from, sizeof(*to));
- else
- /* _sigchld is currently the largest know union member */
- memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-#endif /* __KERNEL__ */
-
-#endif
+++ /dev/null
-#ifndef _M68K_SIGNAL_H
-#define _M68K_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define __HAVE_ARCH_SIG_BITOPS
-
-static inline void sigaddset(sigset_t *set, int _sig)
-{
- asm ("bfset %0{%1,#1}"
- : "+od" (*set)
- : "id" ((_sig - 1) ^ 31)
- : "cc");
-}
-
-static inline void sigdelset(sigset_t *set, int _sig)
-{
- asm ("bfclr %0{%1,#1}"
- : "+od" (*set)
- : "id" ((_sig - 1) ^ 31)
- : "cc");
-}
-
-static inline int __const_sigismember(sigset_t *set, int _sig)
-{
- unsigned long sig = _sig - 1;
- return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static inline int __gen_sigismember(sigset_t *set, int _sig)
-{
- int ret;
- asm ("bfextu %1{%2,#1},%0"
- : "=d" (ret)
- : "od" (*set), "id" ((_sig-1) ^ 31)
- : "cc");
- return ret;
-}
-
-#define sigismember(set,sig) \
- (__builtin_constant_p(sig) ? \
- __const_sigismember(set,sig) : \
- __gen_sigismember(set,sig))
-
-static inline int sigfindinword(unsigned long word)
-{
- asm ("bfffo %1{#0,#0},%0"
- : "=d" (word)
- : "d" (word & -word)
- : "cc");
- return word ^ 31;
-}
-
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SIGNAL_H */
+++ /dev/null
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#endif /* _ASM_SOCKET_H */
+++ /dev/null
-#ifndef __ARCH_M68K_SOCKIOS__
-#define __ARCH_M68K_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* __ARCH_M68K_SOCKIOS__ */
+++ /dev/null
-#ifndef __M68K_SPINLOCK_H
-#define __M68K_SPINLOCK_H
-
-#error "m68k doesn't do SMP yet"
-
-#endif
+++ /dev/null
-#ifndef _M68K_STAT_H
-#define _M68K_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1;
- unsigned long st_mtime;
- unsigned long __unused2;
- unsigned long st_ctime;
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad1[2];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[2];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#endif /* _M68K_STAT_H */
+++ /dev/null
-#ifndef _M68K_STATFS_H
-#define _M68K_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _M68K_STATFS_H */
+++ /dev/null
-#ifndef _M68K_STRING_H_
-#define _M68K_STRING_H_
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-static inline size_t __kernel_strlen(const char *s)
-{
- const char *sc;
-
- for (sc = s; *sc++; )
- ;
- return sc - s - 1;
-}
-
-static inline char *__kernel_strcpy(char *dest, const char *src)
-{
- char *xdest = dest;
-
- asm volatile ("\n"
- "1: move.b (%1)+,(%0)+\n"
- " jne 1b"
- : "+a" (dest), "+a" (src)
- : : "memory");
- return xdest;
-}
-
-#ifndef __IN_STRING_C
-
-#define __HAVE_ARCH_STRLEN
-#define strlen(s) (__builtin_constant_p(s) ? \
- __builtin_strlen(s) : \
- __kernel_strlen(s))
-
-#define __HAVE_ARCH_STRNLEN
-static inline size_t strnlen(const char *s, size_t count)
-{
- const char *sc = s;
-
- asm volatile ("\n"
- "1: subq.l #1,%1\n"
- " jcs 2f\n"
- " tst.b (%0)+\n"
- " jne 1b\n"
- " subq.l #1,%0\n"
- "2:"
- : "+a" (sc), "+d" (count));
- return sc - s;
-}
-
-#define __HAVE_ARCH_STRCPY
-#if __GNUC__ >= 4
-#define strcpy(d, s) (__builtin_constant_p(s) && \
- __builtin_strlen(s) <= 32 ? \
- __builtin_strcpy(d, s) : \
- __kernel_strcpy(d, s))
-#else
-#define strcpy(d, s) __kernel_strcpy(d, s)
-#endif
-
-#define __HAVE_ARCH_STRNCPY
-static inline char *strncpy(char *dest, const char *src, size_t n)
-{
- char *xdest = dest;
-
- asm volatile ("\n"
- " jra 2f\n"
- "1: move.b (%1),(%0)+\n"
- " jeq 2f\n"
- " addq.l #1,%1\n"
- "2: subq.l #1,%2\n"
- " jcc 1b\n"
- : "+a" (dest), "+a" (src), "+d" (n)
- : : "memory");
- return xdest;
-}
-
-#define __HAVE_ARCH_STRCAT
-#define strcat(d, s) ({ \
- char *__d = (d); \
- strcpy(__d + strlen(__d), (s)); \
-})
-
-#define __HAVE_ARCH_STRCHR
-static inline char *strchr(const char *s, int c)
-{
- char sc, ch = c;
-
- for (; (sc = *s++) != ch; ) {
- if (!sc)
- return NULL;
- }
- return (char *)s - 1;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char *cs, const char *ct)
-{
- char res;
-
- asm ("\n"
- "1: move.b (%0)+,%2\n" /* get *cs */
- " cmp.b (%1)+,%2\n" /* compare a byte */
- " jne 2f\n" /* not equal, break out */
- " tst.b %2\n" /* at end of cs? */
- " jne 1b\n" /* no, keep going */
- " jra 3f\n" /* strings are equal */
- "2: sub.b -(%1),%2\n" /* *cs - *ct */
- "3:"
- : "+a" (cs), "+a" (ct), "=d" (res));
- return res;
-}
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *, int, __kernel_size_t);
-#define memset(d, c, n) __builtin_memset(d, c, n)
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *, const void *, __kernel_size_t);
-#define memcpy(d, s, n) __builtin_memcpy(d, s, n)
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *, const void *, __kernel_size_t);
-#define memcmp(d, s, n) __builtin_memcmp(d, s, n)
-
-#endif
-
-#endif /* _M68K_STRING_H_ */
+++ /dev/null
-#ifndef __SUN3_HEAD_H
-#define __SUN3_HEAD_H
-
-#define KERNBASE 0xE000000 /* First address the kernel will eventually be */
-#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */
-#define FC_CONTROL 3
-#define FC_SUPERD 5
-#define FC_CPU 7
-
-#endif /* __SUN3_HEAD_H */
+++ /dev/null
-/* sun3_pgalloc.h --
- * reorganization around 2.3.39, routines moved from sun3_pgtable.h
- *
- *
- * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam)
- *
- * moved 1/26/2000 Sam Creasey
- */
-
-#ifndef _SUN3_PGALLOC_H
-#define _SUN3_PGALLOC_H
-
-#include <asm/tlb.h>
-
-/* FIXME - when we get this compiling */
-/* erm, now that it's compiling, what do we do with it? */
-#define _KERNPG_TABLE 0
-
-extern const char bad_pmd_string[];
-
-#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); })
-
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
- free_page((unsigned long) pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t page)
-{
- pgtable_page_dtor(page);
- __free_page(page);
-}
-
-#define __pte_free_tlb(tlb,pte) \
-do { \
- pgtable_page_dtor(pte); \
- tlb_remove_page((tlb), pte); \
-} while (0)
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
-{
- unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT);
-
- if (!page)
- return NULL;
-
- memset((void *)page, 0, PAGE_SIZE);
- return (pte_t *) (page);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
-{
- struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
-
- if (page == NULL)
- return NULL;
-
- clear_highpage(page);
- pgtable_page_ctor(page);
- return page;
-
-}
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
-{
- pmd_val(*pmd) = __pa((unsigned long)pte);
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
-{
- pmd_val(*pmd) = __pa((unsigned long)page_address(page));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- free_page((unsigned long) pgd);
-}
-
-static inline pgd_t * pgd_alloc(struct mm_struct *mm)
-{
- pgd_t *new_pgd;
-
- new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
- memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
- memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
- return new_pgd;
-}
-
-#define pgd_populate(mm, pmd, pte) BUG()
-
-#endif /* SUN3_PGALLOC_H */
+++ /dev/null
-#ifndef _SUN3_PGTABLE_H
-#define _SUN3_PGTABLE_H
-
-#include <asm/sun3mmu.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/virtconvert.h>
-#include <linux/linkage.h>
-
-/*
- * This file contains all the things which change drastically for the sun3
- * pagetable stuff, to avoid making too much of a mess of the generic m68k
- * `pgtable.h'; this should only be included from the generic file. --m
- */
-
-/* For virtual address to physical address conversion */
-#define VTOP(addr) __pa(addr)
-#define PTOV(addr) __va(addr)
-
-
-#endif /* !__ASSEMBLY__ */
-
-/* These need to be defined for compatibility although the sun3 doesn't use them */
-#define _PAGE_NOCACHE030 0x040
-#define _CACHEMASK040 (~0x060)
-#define _PAGE_NOCACHE_S 0x040
-
-/* Page protection values within PTE. */
-#define SUN3_PAGE_VALID (0x80000000)
-#define SUN3_PAGE_WRITEABLE (0x40000000)
-#define SUN3_PAGE_SYSTEM (0x20000000)
-#define SUN3_PAGE_NOCACHE (0x10000000)
-#define SUN3_PAGE_ACCESSED (0x02000000)
-#define SUN3_PAGE_MODIFIED (0x01000000)
-
-
-/* Externally used page protection values. */
-#define _PAGE_PRESENT (SUN3_PAGE_VALID)
-#define _PAGE_ACCESSED (SUN3_PAGE_ACCESSED)
-
-#define PTE_FILE_MAX_BITS 28
-
-/* Compound page protection values. */
-//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix...
-// is it just PAGE_KERNEL and PAGE_SHARED?
-#define PAGE_NONE __pgprot(SUN3_PAGE_VALID \
- | SUN3_PAGE_ACCESSED \
- | SUN3_PAGE_NOCACHE)
-#define PAGE_SHARED __pgprot(SUN3_PAGE_VALID \
- | SUN3_PAGE_WRITEABLE \
- | SUN3_PAGE_ACCESSED \
- | SUN3_PAGE_NOCACHE)
-#define PAGE_COPY __pgprot(SUN3_PAGE_VALID \
- | SUN3_PAGE_ACCESSED \
- | SUN3_PAGE_NOCACHE)
-#define PAGE_READONLY __pgprot(SUN3_PAGE_VALID \
- | SUN3_PAGE_ACCESSED \
- | SUN3_PAGE_NOCACHE)
-#define PAGE_KERNEL __pgprot(SUN3_PAGE_VALID \
- | SUN3_PAGE_WRITEABLE \
- | SUN3_PAGE_SYSTEM \
- | SUN3_PAGE_NOCACHE \
- | SUN3_PAGE_ACCESSED \
- | SUN3_PAGE_MODIFIED)
-#define PAGE_INIT __pgprot(SUN3_PAGE_VALID \
- | SUN3_PAGE_WRITEABLE \
- | SUN3_PAGE_SYSTEM \
- | SUN3_PAGE_NOCACHE)
-
-/*
- * Page protections for initialising protection_map. The sun3 has only two
- * protection settings, valid (implying read and execute) and writeable. These
- * are as close as we can get...
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED
-
-/* Use these fake page-protections on PMDs. */
-#define SUN3_PMD_VALID (0x00000001)
-#define SUN3_PMD_MASK (0x0000003F)
-#define SUN3_PMD_MAGIC (0x0000002B)
-
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
- return pte;
-}
-
-#define pmd_set(pmdp,ptep) do {} while (0)
-
-static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-{
- pgd_val(*pgdp) = virt_to_phys(pmdp);
-}
-
-#define __pte_page(pte) \
-((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT))
-#define __pmd_page(pmd) \
-((unsigned long) __va (pmd_val (pmd) & PAGE_MASK))
-
-static inline int pte_none (pte_t pte) { return !pte_val (pte); }
-static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; }
-static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- pte_val (*ptep) = 0;
-}
-
-#define pte_pfn(pte) (pte_val(pte) & SUN3_PAGE_PGNUM_MASK)
-#define pfn_pte(pfn, pgprot) \
-({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
-
-#define pte_page(pte) virt_to_page(__pte_page(pte))
-#define pmd_page(pmd) virt_to_page(__pmd_page(pmd))
-
-
-static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); }
-#define pmd_none(pmd) pmd_none2(&(pmd))
-//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; }
-static inline int pmd_bad2 (pmd_t *pmd) { return 0; }
-#define pmd_bad(pmd) pmd_bad2(&(pmd))
-static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; }
-/* #define pmd_present(pmd) pmd_present2(&(pmd)) */
-#define pmd_present(pmd) (!pmd_none2(&(pmd)))
-static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
-
-static inline int pgd_none (pgd_t pgd) { return 0; }
-static inline int pgd_bad (pgd_t pgd) { return 0; }
-static inline int pgd_present (pgd_t pgd) { return 1; }
-static inline void pgd_clear (pgd_t *pgdp) {}
-
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not...
- * [we have the full set here even if they don't change from m68k]
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & SUN3_PAGE_MODIFIED; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte) { return 0; }
-
-static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
-static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
-static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mknocache(pte_t pte) { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; }
-// use this version when caches work...
-//static inline pte_t pte_mkcache(pte_t pte) { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
-// until then, use:
-static inline pte_t pte_mkcache(pte_t pte) { return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
-
-/* Find an entry in a pagetable directory. */
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-
-#define pgd_offset(mm, address) \
-((mm)->pgd + pgd_index(address))
-
-/* Find an entry in a kernel pagetable directory. */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* Find an entry in the second-level pagetable. */
-static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address)
-{
- return (pmd_t *) pgd;
-}
-
-static inline unsigned long pte_to_pgoff(pte_t pte)
-{
- return pte.pte & SUN3_PAGE_PGNUM_MASK;
-}
-
-static inline pte_t pgoff_to_pte(unsigned off)
-{
- pte_t pte = { off + SUN3_PAGE_ACCESSED };
- return pte;
-}
-
-
-/* Find an entry in the third-level pagetable. */
-#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
-#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address))
-/* FIXME: should we bother with kmap() here? */
-#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address))
-#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address)
-#define pte_unmap(pte) kunmap(pte)
-#define pte_unmap_nested(pte) kunmap(pte)
-
-/* Macros to (de)construct the fake PTEs representing swap pages. */
-#define __swp_type(x) ((x).val & 0x7F)
-#define __swp_offset(x) (((x).val) >> 7)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-#endif /* !__ASSEMBLY__ */
-#endif /* !_SUN3_PGTABLE_H */
+++ /dev/null
-/*
- * sun3ints.h -- Linux/Sun3 interrupt handling code definitions
- *
- * Erik Verbruggen (erik@bigmama.xtdnet.nl)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef SUN3INTS_H
-#define SUN3INTS_H
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/intersil.h>
-#include <asm/oplib.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-
-#define SUN3_INT_VECS 192
-
-void sun3_enable_irq(unsigned int irq);
-void sun3_disable_irq(unsigned int irq);
-extern void sun3_init_IRQ (void);
-extern void sun3_enable_interrupts (void);
-extern void sun3_disable_interrupts (void);
-extern volatile unsigned char* sun3_intreg;
-
-/* master list of VME vectors -- don't fuck with this */
-#define SUN3_VEC_FLOPPY (IRQ_USER+0)
-#define SUN3_VEC_VMESCSI0 (IRQ_USER+0)
-#define SUN3_VEC_VMESCSI1 (IRQ_USER+1)
-#define SUN3_VEC_CG (IRQ_USER+104)
-
-
-#endif /* SUN3INTS_H */
+++ /dev/null
-/*
- * Definitions for Sun3 custom MMU.
- */
-#ifndef __SUN3_MMU_H__
-#define __SUN3_MMU_H__
-
-#include <linux/types.h>
-#include <asm/movs.h>
-#include <asm/sun3-head.h>
-
-/* MMU characteristics. */
-#define SUN3_SEGMAPS_PER_CONTEXT 2048
-#define SUN3_PMEGS_NUM 256
-#define SUN3_CONTEXTS_NUM 8
-
-#define SUN3_PMEG_SIZE_BITS 17
-#define SUN3_PMEG_SIZE (1 << SUN3_PMEG_SIZE_BITS)
-#define SUN3_PMEG_MASK (SUN3_PMEG_SIZE - 1)
-
-#define SUN3_PTE_SIZE_BITS 13
-#define SUN3_PTE_SIZE (1 << SUN3_PTE_SIZE_BITS)
-#define SUN3_PTE_MASK (SUN3_PTE_SIZE - 1)
-
-#define SUN3_CONTROL_MASK (0x0FFFFFFC)
-#define SUN3_INVALID_PMEG 255
-#define SUN3_INVALID_CONTEXT 255
-
-#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */
-#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */
-#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */
-#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */
-#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/
-#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */
-#define AC_BUS_ERROR 0x60000000 /* 34 Cleared on read, byte. */
-#define AC_SYNC_ERR 0x60000000 /* c fault type */
-#define AC_SYNC_VA 0x60000004 /* c fault virtual address */
-#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */
-#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */
-#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */
-#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */
-#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */
-#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */
-#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */
-#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/
-
-#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \
- | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED)
-
-/* Bus access type within PTE. */
-#define SUN3_PAGE_TYPE_MASK (0x0c000000)
-#define SUN3_PAGE_TYPE_MEMORY (0x00000000)
-#define SUN3_PAGE_TYPE_IO (0x04000000)
-#define SUN3_PAGE_TYPE_VME16 (0x08000000)
-#define SUN3_PAGE_TYPE_VME32 (0x0c000000)
-
-/* Mask for page number within PTE. */
-#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF)
-
-/* Bits within bus-error register. */
-#define SUN3_BUSERR_WATCHDOG (0x01)
-#define SUN3_BUSERR_unused (0x02)
-#define SUN3_BUSERR_FPAENERR (0x04)
-#define SUN3_BUSERR_FPABERR (0x08)
-#define SUN3_BUSERR_VMEBERR (0x10)
-#define SUN3_BUSERR_TIMEOUT (0x20)
-#define SUN3_BUSERR_PROTERR (0x40)
-#define SUN3_BUSERR_INVALID (0x80)
-
-#ifndef __ASSEMBLY__
-
-/* Read bus error status register (implicitly clearing it). */
-static inline unsigned char sun3_get_buserr(void)
-{
- unsigned char sfc, c;
-
- GET_SFC (sfc);
- SET_SFC (FC_CONTROL);
- GET_CONTROL_BYTE (AC_BUS_ERROR, c);
- SET_SFC (sfc);
-
- return c;
-}
-
-/* Read segmap from hardware MMU. */
-static inline unsigned long sun3_get_segmap(unsigned long addr)
-{
- register unsigned long entry;
- unsigned char c, sfc;
-
- GET_SFC (sfc);
- SET_SFC (FC_CONTROL);
- GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c);
- SET_SFC (sfc);
- entry = c;
-
- return entry;
-}
-
-/* Write segmap to hardware MMU. */
-static inline void sun3_put_segmap(unsigned long addr, unsigned long entry)
-{
- unsigned char sfc;
-
- GET_DFC (sfc);
- SET_DFC (FC_CONTROL);
- SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry);
- SET_DFC (sfc);
-
- return;
-}
-
-/* Read PTE from hardware MMU. */
-static inline unsigned long sun3_get_pte(unsigned long addr)
-{
- register unsigned long entry;
- unsigned char sfc;
-
- GET_SFC (sfc);
- SET_SFC (FC_CONTROL);
- GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
- SET_SFC (sfc);
-
- return entry;
-}
-
-/* Write PTE to hardware MMU. */
-static inline void sun3_put_pte(unsigned long addr, unsigned long entry)
-{
- unsigned char sfc;
-
- GET_DFC (sfc);
- SET_DFC (FC_CONTROL);
- SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
- SET_DFC (sfc);
-
- return;
-}
-
-/* get current context */
-static inline unsigned char sun3_get_context(void)
-{
- unsigned char sfc, c;
-
- GET_SFC(sfc);
- SET_SFC(FC_CONTROL);
- GET_CONTROL_BYTE(AC_CONTEXT, c);
- SET_SFC(sfc);
-
- return c;
-}
-
-/* set alternate context */
-static inline void sun3_put_context(unsigned char c)
-{
- unsigned char dfc;
- GET_DFC(dfc);
- SET_DFC(FC_CONTROL);
- SET_CONTROL_BYTE(AC_CONTEXT, c);
- SET_DFC(dfc);
-
- return;
-}
-
-extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size,
- unsigned long type);
-
-extern int sun3_map_test(unsigned long addr, char *val);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* !__SUN3_MMU_H__ */
+++ /dev/null
-#ifndef SUN3X_H
-#define SUN3X_H
-
-/* hardware addresses */
-#define SUN3X_IOMMU 0x60000000
-#define SUN3X_ENAREG 0x61000000
-#define SUN3X_INTREG 0x61001400
-#define SUN3X_DIAGREG 0x61001800
-#define SUN3X_ZS1 0x62000000
-#define SUN3X_ZS2 0x62002000
-#define SUN3X_LANCE 0x65002000
-#define SUN3X_EEPROM 0x64000000
-#define SUN3X_IDPROM 0x640007d8
-#define SUN3X_VIDEO_BASE 0x50000000
-#define SUN3X_VIDEO_P4ID 0x50300000
-#define SUN3X_ESP_BASE 0x66000000
-#define SUN3X_ESP_DMA 0x66001000
-#define SUN3X_FDC 0x6e000000
-#define SUN3X_FDC_FCR 0x6e000400
-#define SUN3X_FDC_FVR 0x6e000800
-
-/* some NVRAM addresses */
-#define SUN3X_EEPROM_CONS (SUN3X_EEPROM + 0x1f)
-#define SUN3X_EEPROM_PORTA (SUN3X_EEPROM + 0x58)
-#define SUN3X_EEPROM_PORTB (SUN3X_EEPROM + 0x60)
-
-#endif
+++ /dev/null
-/* sun3xflop.h: Sun3/80 specific parts of the floppy driver.
- *
- * Derived partially from asm-sparc/floppy.h, which is:
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net)
- */
-
-#ifndef __ASM_SUN3X_FLOPPY_H
-#define __ASM_SUN3X_FLOPPY_H
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/sun3x.h>
-
-/* default interrupt vector */
-#define SUN3X_FDC_IRQ 0x40
-
-/* some constants */
-#define FCR_TC 0x1
-#define FCR_EJECT 0x2
-#define FCR_MTRON 0x4
-#define FCR_DSEL1 0x8
-#define FCR_DSEL0 0x10
-
-/* We don't need no stinkin' I/O port allocation crap. */
-#undef release_region
-#undef request_region
-#define release_region(X, Y) do { } while(0)
-#define request_region(X, Y, Z) (1)
-
-struct sun3xflop_private {
- volatile unsigned char *status_r;
- volatile unsigned char *data_r;
- volatile unsigned char *fcr_r;
- volatile unsigned char *fvr_r;
- unsigned char fcr;
-} sun3x_fdc;
-
-/* Super paranoid... */
-#undef HAVE_DISABLE_HLT
-
-/* Routines unique to each controller type on a Sun. */
-static unsigned char sun3x_82072_fd_inb(int port)
-{
- static int once = 0;
-// udelay(5);
- switch(port & 7) {
- default:
- printk("floppy: Asked to read unknown port %d\n", port);
- panic("floppy: Port bolixed.");
- case 4: /* FD_STATUS */
- return (*sun3x_fdc.status_r) & ~STATUS_DMA;
- case 5: /* FD_DATA */
- return (*sun3x_fdc.data_r);
- case 7: /* FD_DIR */
- /* ugly hack, I can't find a way to actually detect the disk */
- if(!once) {
- once = 1;
- return 0x80;
- }
- return 0;
- };
- panic("sun_82072_fd_inb: How did I get here?");
-}
-
-static void sun3x_82072_fd_outb(unsigned char value, int port)
-{
-// udelay(5);
- switch(port & 7) {
- default:
- printk("floppy: Asked to write to unknown port %d\n", port);
- panic("floppy: Port bolixed.");
- case 2: /* FD_DOR */
- /* Oh geese, 82072 on the Sun has no DOR register,
- * so we make do with taunting the FCR.
- *
- * ASSUMPTIONS: There will only ever be one floppy
- * drive attached to a Sun controller
- * and it will be at drive zero.
- */
-
- {
- unsigned char fcr = sun3x_fdc.fcr;
-
- if(value & 0x10) {
- fcr |= (FCR_DSEL0 | FCR_MTRON);
- } else
- fcr &= ~(FCR_DSEL0 | FCR_MTRON);
-
-
- if(fcr != sun3x_fdc.fcr) {
- *(sun3x_fdc.fcr_r) = fcr;
- sun3x_fdc.fcr = fcr;
- }
- }
- break;
- case 5: /* FD_DATA */
- *(sun3x_fdc.data_r) = value;
- break;
- case 7: /* FD_DCR */
- *(sun3x_fdc.status_r) = value;
- break;
- case 4: /* FD_STATUS */
- *(sun3x_fdc.status_r) = value;
- break;
- };
- return;
-}
-
-
-asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if(!doing_pdma) {
- floppy_interrupt(irq, dev_id);
- return IRQ_HANDLED;
- }
-
-// printk("doing pdma\n");// st %x\n", sun_fdc->status_82072);
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
- {
- register int lcount;
- register char *lptr;
-
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
-/* st=fd_inb(virtual_dma_port+4) & 0x80 ; */
- st = *(sun3x_fdc.status_r);
-/* if(st != 0xa0) */
-/* break; */
-
- if((st & 0x80) == 0) {
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- return IRQ_HANDLED;
- }
-
- if((st & 0x20) == 0)
- break;
-
- if(virtual_dma_mode)
-/* fd_outb(*lptr, virtual_dma_port+5); */
- *(sun3x_fdc.data_r) = *lptr;
- else
-/* *lptr = fd_inb(virtual_dma_port+5); */
- *lptr = *(sun3x_fdc.data_r);
- }
-
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
-/* st = fd_inb(virtual_dma_port+4); */
- st = *(sun3x_fdc.status_r);
- }
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
-// printk("st=%02x\n", st);
- if(st == 0x20)
- return IRQ_HANDLED;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
- doing_pdma = 0;
-
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
-
- floppy_interrupt(irq, dev_id);
- return IRQ_HANDLED;
- }
-
-
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
- return IRQ_HANDLED;
-}
-
-static int sun3xflop_request_irq(void)
-{
- static int once = 0;
- int error;
-
- if(!once) {
- once = 1;
- error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
- IRQF_DISABLED, "floppy", NULL);
- return ((error == 0) ? 0 : -1);
- } else return 0;
-}
-
-static void __init floppy_set_flags(int *ints,int param, int param2);
-
-static int sun3xflop_init(void)
-{
- if(FLOPPY_IRQ < 0x40)
- FLOPPY_IRQ = SUN3X_FDC_IRQ;
-
- sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC;
- sun3x_fdc.data_r = (volatile unsigned char *)(SUN3X_FDC+1);
- sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR;
- sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR;
- sun3x_fdc.fcr = 0;
-
- /* Last minute sanity check... */
- if(*sun3x_fdc.status_r == 0xff) {
- return -1;
- }
-
- *sun3x_fdc.fvr_r = FLOPPY_IRQ;
-
- *sun3x_fdc.fcr_r = FCR_TC;
- udelay(10);
- *sun3x_fdc.fcr_r = 0;
-
- /* Success... */
- floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this.
- allowed_drive_mask = 0x01;
- return (int) SUN3X_FDC;
-}
-
-/* I'm not precisely sure this eject routine works */
-static int sun3x_eject(void)
-{
- if(MACH_IS_SUN3X) {
-
- sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT);
- *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
- udelay(10);
- sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT);
- *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
- }
-
- return 0;
-}
-
-#define fd_eject(drive) sun3x_eject()
-
-#endif /* !(__ASM_SUN3X_FLOPPY_H) */
+++ /dev/null
-/* Useful PROM locations */
-
-#ifndef SUN3X_PROM_H
-#define SUN3X_PROM_H
-
-extern void (*sun3x_putchar)(int);
-extern int (*sun3x_getchar)(void);
-extern int (*sun3x_mayget)(void);
-extern int (*sun3x_mayput)(int);
-
-void sun3x_reboot(void);
-void sun3x_abort(void);
-void sun3x_prom_init(void);
-unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size);
-
-/* interesting hardware locations */
-#define SUN3X_IOMMU 0x60000000
-#define SUN3X_ENAREG 0x61000000
-#define SUN3X_INTREG 0x61001400
-#define SUN3X_DIAGREG 0x61001800
-#define SUN3X_ZS1 0x62000000
-#define SUN3X_ZS2 0x62002000
-#define SUN3X_LANCE 0x65002000
-#define SUN3X_EEPROM 0x64000000
-#define SUN3X_IDPROM 0x640007d8
-#define SUN3X_VIDEO_BASE 0x50400000
-#define SUN3X_VIDEO_REGS 0x50300000
-
-/* vector table */
-#define SUN3X_PROM_BASE 0xfefe0000
-#define SUN3X_P_GETCHAR (SUN3X_PROM_BASE + 20)
-#define SUN3X_P_PUTCHAR (SUN3X_PROM_BASE + 24)
-#define SUN3X_P_MAYGET (SUN3X_PROM_BASE + 28)
-#define SUN3X_P_MAYPUT (SUN3X_PROM_BASE + 32)
-#define SUN3X_P_REBOOT (SUN3X_PROM_BASE + 96)
-#define SUN3X_P_SETLEDS (SUN3X_PROM_BASE + 144)
-#define SUN3X_P_ABORT (SUN3X_PROM_BASE + 152)
-
-/* mapped area */
-#define SUN3X_MAP_START 0xfee00000
-#define SUN3X_MAP_END 0xff000000
-
-#endif
+++ /dev/null
-#ifndef _M68K_SUSPEND_H
-#define _M68K_SUSPEND_H
-
-/* Dummy include. */
-
-#endif /* _M68K_SUSPEND_H */
+++ /dev/null
-#ifndef _M68K_SWAB_H
-#define _M68K_SWAB_H
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
- __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
- return val;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif /* _M68K_SWAB_H */
+++ /dev/null
-#ifndef _M68K_SYSTEM_H
-#define _M68K_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <linux/kernel.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-#ifdef __KERNEL__
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) do { \
- register void *_prev __asm__ ("a0") = (prev); \
- register void *_next __asm__ ("a1") = (next); \
- register void *_last __asm__ ("d1"); \
- __asm__ __volatile__("jbsr resume" \
- : "=a" (_prev), "=a" (_next), "=d" (_last) \
- : "0" (_prev), "1" (_next) \
- : "d0", "d2", "d3", "d4", "d5"); \
- (last) = _last; \
-} while (0)
-
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop() do { asm volatile ("nop"); barrier(); } while (0)
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define read_barrier_depends() ((void)0)
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() ((void)0)
-
-/* interrupt control.. */
-#if 0
-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
-#else
-#include <linux/hardirq.h>
-#define local_irq_enable() ({ \
- if (MACH_IS_Q40 || !hardirq_count()) \
- asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \
-})
-#endif
-#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
-#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
-#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
-
-static inline int irqs_disabled(void)
-{
- unsigned long flags;
- local_save_flags(flags);
- return flags & ~ALLOWINT;
-}
-
-/* For spinlocks etc */
-#define local_irq_save(x) ({ local_save_flags(x); local_irq_disable(); })
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long flags, tmp;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- tmp = *(u8 *)ptr;
- *(u8 *)ptr = x;
- x = tmp;
- break;
- case 2:
- tmp = *(u16 *)ptr;
- *(u16 *)ptr = x;
- x = tmp;
- break;
- case 4:
- tmp = *(u32 *)ptr;
- *(u32 *)ptr = x;
- x = tmp;
- break;
- default:
- BUG();
- }
-
- local_irq_restore(flags);
- return x;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "1:\n\t"
- "casb %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "1:\n\t"
- "casw %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "1:\n\t"
- "casl %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-/*
- * Atomic compare and exchange. Compare OLD with MEM, if identical,
- * store NEW in MEM. Return the initial value in MEM. Success is
- * indicated by comparing RETURN with OLD.
- */
-#ifdef CONFIG_RMW_INSNS
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__ ("casb %0,%2,%1"
- : "=d" (old), "=m" (*(char *)p)
- : "d" (new), "0" (old), "m" (*(char *)p));
- break;
- case 2:
- __asm__ __volatile__ ("casw %0,%2,%1"
- : "=d" (old), "=m" (*(short *)p)
- : "d" (new), "0" (old), "m" (*(short *)p));
- break;
- case 4:
- __asm__ __volatile__ ("casl %0,%2,%1"
- : "=d" (old), "=m" (*(int *)p)
- : "d" (new), "0" (old), "m" (*(int *)p));
- break;
- }
- return old;
-}
-
-#define cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#else
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SYSTEM_H */
+++ /dev/null
-#ifndef __ARCH_M68K_TERMBITS_H__
-#define __ARCH_M68K_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* __ARCH_M68K_TERMBITS_H__ */
+++ /dev/null
-#ifndef _M68K_TERMIOS_H
-#define _M68K_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- unsigned short tmp; \
- get_user(tmp, &(termio)->c_iflag); \
- (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
- get_user(tmp, &(termio)->c_oflag); \
- (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
- get_user(tmp, &(termio)->c_cflag); \
- (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
- get_user(tmp, &(termio)->c_lflag); \
- (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
- get_user((termios)->c_line, &(termio)->c_line); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_TERMIOS_H */
+++ /dev/null
-#ifndef _ASM_M68K_THREAD_INFO_H
-#define _ASM_M68K_THREAD_INFO_H
-
-#include <asm/types.h>
-#include <asm/page.h>
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- unsigned long flags;
- struct exec_domain *exec_domain; /* execution domain */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- __u32 cpu; /* should always be 0 on m68k */
- struct restart_block restart_block;
-};
-
-#define PREEMPT_ACTIVE 0x4000000
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
-#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
-
-#define init_thread_info (init_task.thread.info)
-#define init_stack (init_thread_union.stack)
-
-#define task_thread_info(tsk) (&(tsk)->thread.info)
-#define task_stack_page(tsk) ((tsk)->stack)
-#define current_thread_info() task_thread_info(current)
-
-#define __HAVE_THREAD_FUNCTIONS
-
-#define setup_thread_stack(p, org) ({ \
- *(struct task_struct **)(p)->stack = (p); \
- task_thread_info(p)->task = (p); \
-})
-
-#define end_of_stack(p) ((unsigned long *)(p)->stack + 1)
-
-/* entry.S relies on these definitions!
- * bits 0-7 are tested at every exception exit
- * bits 8-15 are also tested at syscall exit
- */
-#define TIF_SIGPENDING 6 /* signal pending */
-#define TIF_NEED_RESCHED 7 /* rescheduling necessary */
-#define TIF_DELAYED_TRACE 14 /* single step a syscall */
-#define TIF_SYSCALL_TRACE 15 /* syscall trace active */
-#define TIF_MEMDIE 16
-#define TIF_FREEZE 17 /* thread is freezing for suspend */
-
-#endif /* _ASM_M68K_THREAD_INFO_H */
+++ /dev/null
-/*
- * linux/include/asm-m68k/timex.h
- *
- * m68k architecture timex specifications
- */
-#ifndef _ASMm68k_TIMEX_H
-#define _ASMm68k_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#endif
+++ /dev/null
-#ifndef _M68K_TLB_H
-#define _M68K_TLB_H
-
-/*
- * m68k doesn't need any special per-pte or
- * per-vma handling..
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it
- * fills up.
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-#endif /* _M68K_TLB_H */
+++ /dev/null
-#ifndef _M68K_TLBFLUSH_H
-#define _M68K_TLBFLUSH_H
-
-
-#ifndef CONFIG_SUN3
-
-#include <asm/current.h>
-
-static inline void flush_tlb_kernel_page(void *addr)
-{
- if (CPU_IS_040_OR_060) {
- mm_segment_t old_fs = get_fs();
- set_fs(KERNEL_DS);
- __asm__ __volatile__(".chip 68040\n\t"
- "pflush (%0)\n\t"
- ".chip 68k"
- : : "a" (addr));
- set_fs(old_fs);
- } else if (CPU_IS_020_OR_030)
- __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr));
-}
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- if (CPU_IS_040_OR_060)
- __asm__ __volatile__(".chip 68040\n\t"
- "pflushan\n\t"
- ".chip 68k");
- else if (CPU_IS_020_OR_030)
- __asm__ __volatile__("pflush #0,#4");
-}
-
-static inline void __flush_tlb040_one(unsigned long addr)
-{
- __asm__ __volatile__(".chip 68040\n\t"
- "pflush (%0)\n\t"
- ".chip 68k"
- : : "a" (addr));
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- if (CPU_IS_040_OR_060)
- __flush_tlb040_one(addr);
- else if (CPU_IS_020_OR_030)
- __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- if (CPU_IS_040_OR_060)
- __asm__ __volatile__(".chip 68040\n\t"
- "pflusha\n\t"
- ".chip 68k");
- else if (CPU_IS_020_OR_030)
- __asm__ __volatile__("pflusha");
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- if (mm == current->active_mm)
- __flush_tlb();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- if (vma->vm_mm == current->active_mm) {
- mm_segment_t old_fs = get_fs();
- set_fs(USER_DS);
- __flush_tlb_one(addr);
- set_fs(old_fs);
- }
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- if (vma->vm_mm == current->active_mm)
- __flush_tlb();
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- flush_tlb_all();
-}
-
-#else
-
-
-/* Reserved PMEGs. */
-extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM];
-extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM];
-extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM];
-
-/* Flush all userspace mappings one by one... (why no flush command,
- sun?) */
-static inline void flush_tlb_all(void)
-{
- unsigned long addr;
- unsigned char ctx, oldctx;
-
- oldctx = sun3_get_context();
- for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) {
- for(ctx = 0; ctx < 8; ctx++) {
- sun3_put_context(ctx);
- sun3_put_segmap(addr, SUN3_INVALID_PMEG);
- }
- }
-
- sun3_put_context(oldctx);
- /* erase all of the userspace pmeg maps, we've clobbered them
- all anyway */
- for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) {
- if(pmeg_alloc[addr] == 1) {
- pmeg_alloc[addr] = 0;
- pmeg_ctx[addr] = 0;
- pmeg_vaddr[addr] = 0;
- }
- }
-
-}
-
-/* Clear user TLB entries within the context named in mm */
-static inline void flush_tlb_mm (struct mm_struct *mm)
-{
- unsigned char oldctx;
- unsigned char seg;
- unsigned long i;
-
- oldctx = sun3_get_context();
- sun3_put_context(mm->context);
-
- for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) {
- seg = sun3_get_segmap(i);
- if(seg == SUN3_INVALID_PMEG)
- continue;
-
- sun3_put_segmap(i, SUN3_INVALID_PMEG);
- pmeg_alloc[seg] = 0;
- pmeg_ctx[seg] = 0;
- pmeg_vaddr[seg] = 0;
- }
-
- sun3_put_context(oldctx);
-
-}
-
-/* Flush a single TLB page. In this case, we're limited to flushing a
- single PMEG */
-static inline void flush_tlb_page (struct vm_area_struct *vma,
- unsigned long addr)
-{
- unsigned char oldctx;
- unsigned char i;
-
- oldctx = sun3_get_context();
- sun3_put_context(vma->vm_mm->context);
- addr &= ~SUN3_PMEG_MASK;
- if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG)
- {
- pmeg_alloc[i] = 0;
- pmeg_ctx[i] = 0;
- pmeg_vaddr[i] = 0;
- sun3_put_segmap (addr, SUN3_INVALID_PMEG);
- }
- sun3_put_context(oldctx);
-
-}
-/* Flush a range of pages from TLB. */
-
-static inline void flush_tlb_range (struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned char seg, oldctx;
-
- start &= ~SUN3_PMEG_MASK;
-
- oldctx = sun3_get_context();
- sun3_put_context(mm->context);
-
- while(start < end)
- {
- if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG)
- goto next;
- if(pmeg_ctx[seg] == mm->context) {
- pmeg_alloc[seg] = 0;
- pmeg_ctx[seg] = 0;
- pmeg_vaddr[seg] = 0;
- }
- sun3_put_segmap(start, SUN3_INVALID_PMEG);
- next:
- start += SUN3_PMEG_SIZE;
- }
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- flush_tlb_all();
-}
-
-/* Flush kernel page from TLB. */
-static inline void flush_tlb_kernel_page (unsigned long addr)
-{
- sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
-}
-
-#endif
-
-#endif /* _M68K_TLBFLUSH_H */
+++ /dev/null
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
+++ /dev/null
-/*
- * linux/include/asm/traps.h
- *
- * Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _M68K_TRAPS_H
-#define _M68K_TRAPS_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-
-typedef void (*e_vector)(void);
-
-asmlinkage void auto_inthandler(void);
-asmlinkage void user_inthandler(void);
-asmlinkage void bad_inthandler(void);
-
-extern e_vector vectors[];
-
-#endif
-
-#define VEC_RESETSP (0)
-#define VEC_RESETPC (1)
-#define VEC_BUSERR (2)
-#define VEC_ADDRERR (3)
-#define VEC_ILLEGAL (4)
-#define VEC_ZERODIV (5)
-#define VEC_CHK (6)
-#define VEC_TRAP (7)
-#define VEC_PRIV (8)
-#define VEC_TRACE (9)
-#define VEC_LINE10 (10)
-#define VEC_LINE11 (11)
-#define VEC_RESV12 (12)
-#define VEC_COPROC (13)
-#define VEC_FORMAT (14)
-#define VEC_UNINT (15)
-#define VEC_RESV16 (16)
-#define VEC_RESV17 (17)
-#define VEC_RESV18 (18)
-#define VEC_RESV19 (19)
-#define VEC_RESV20 (20)
-#define VEC_RESV21 (21)
-#define VEC_RESV22 (22)
-#define VEC_RESV23 (23)
-#define VEC_SPUR (24)
-#define VEC_INT1 (25)
-#define VEC_INT2 (26)
-#define VEC_INT3 (27)
-#define VEC_INT4 (28)
-#define VEC_INT5 (29)
-#define VEC_INT6 (30)
-#define VEC_INT7 (31)
-#define VEC_SYS (32)
-#define VEC_TRAP1 (33)
-#define VEC_TRAP2 (34)
-#define VEC_TRAP3 (35)
-#define VEC_TRAP4 (36)
-#define VEC_TRAP5 (37)
-#define VEC_TRAP6 (38)
-#define VEC_TRAP7 (39)
-#define VEC_TRAP8 (40)
-#define VEC_TRAP9 (41)
-#define VEC_TRAP10 (42)
-#define VEC_TRAP11 (43)
-#define VEC_TRAP12 (44)
-#define VEC_TRAP13 (45)
-#define VEC_TRAP14 (46)
-#define VEC_TRAP15 (47)
-#define VEC_FPBRUC (48)
-#define VEC_FPIR (49)
-#define VEC_FPDIVZ (50)
-#define VEC_FPUNDER (51)
-#define VEC_FPOE (52)
-#define VEC_FPOVER (53)
-#define VEC_FPNAN (54)
-#define VEC_FPUNSUP (55)
-#define VEC_MMUCFG (56)
-#define VEC_MMUILL (57)
-#define VEC_MMUACC (58)
-#define VEC_RESV59 (59)
-#define VEC_UNIMPEA (60)
-#define VEC_UNIMPII (61)
-#define VEC_RESV62 (62)
-#define VEC_RESV63 (63)
-#define VEC_USER (64)
-
-#define VECOFF(vec) ((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T (0x8000)
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#define PS_C (0x0001)
-
-/* bits for 68020/68030 special status word */
-
-#define FC (0x8000)
-#define FB (0x4000)
-#define RC (0x2000)
-#define RB (0x1000)
-#define DF (0x0100)
-#define RM (0x0080)
-#define RW (0x0040)
-#define SZ (0x0030)
-#define DFC (0x0007)
-
-/* bits for 68030 MMU status register (mmusr,psr) */
-
-#define MMU_B (0x8000) /* bus error */
-#define MMU_L (0x4000) /* limit violation */
-#define MMU_S (0x2000) /* supervisor violation */
-#define MMU_WP (0x0800) /* write-protected */
-#define MMU_I (0x0400) /* invalid descriptor */
-#define MMU_M (0x0200) /* ATC entry modified */
-#define MMU_T (0x0040) /* transparent translation */
-#define MMU_NUM (0x0007) /* number of levels traversed */
-
-
-/* bits for 68040 special status word */
-#define CP_040 (0x8000)
-#define CU_040 (0x4000)
-#define CT_040 (0x2000)
-#define CM_040 (0x1000)
-#define MA_040 (0x0800)
-#define ATC_040 (0x0400)
-#define LK_040 (0x0200)
-#define RW_040 (0x0100)
-#define SIZ_040 (0x0060)
-#define TT_040 (0x0018)
-#define TM_040 (0x0007)
-
-/* bits for 68040 write back status word */
-#define WBV_040 (0x80)
-#define WBSIZ_040 (0x60)
-#define WBBYT_040 (0x20)
-#define WBWRD_040 (0x40)
-#define WBLNG_040 (0x00)
-#define WBTT_040 (0x18)
-#define WBTM_040 (0x07)
-
-/* bus access size codes */
-#define BA_SIZE_BYTE (0x20)
-#define BA_SIZE_WORD (0x40)
-#define BA_SIZE_LONG (0x00)
-#define BA_SIZE_LINE (0x60)
-
-/* bus access transfer type codes */
-#define BA_TT_MOVE16 (0x08)
-
-/* bits for 68040 MMU status register (mmusr) */
-#define MMU_B_040 (0x0800)
-#define MMU_G_040 (0x0400)
-#define MMU_S_040 (0x0080)
-#define MMU_CM_040 (0x0060)
-#define MMU_M_040 (0x0010)
-#define MMU_WP_040 (0x0004)
-#define MMU_T_040 (0x0002)
-#define MMU_R_040 (0x0001)
-
-/* bits in the 68060 fault status long word (FSLW) */
-#define MMU060_MA (0x08000000) /* misaligned */
-#define MMU060_LK (0x02000000) /* locked transfer */
-#define MMU060_RW (0x01800000) /* read/write */
-# define MMU060_RW_W (0x00800000) /* write */
-# define MMU060_RW_R (0x01000000) /* read */
-# define MMU060_RW_RMW (0x01800000) /* read/modify/write */
-# define MMU060_W (0x00800000) /* general write, includes rmw */
-#define MMU060_SIZ (0x00600000) /* transfer size */
-#define MMU060_TT (0x00180000) /* transfer type (TT) bits */
-#define MMU060_TM (0x00070000) /* transfer modifier (TM) bits */
-#define MMU060_IO (0x00008000) /* instruction or operand */
-#define MMU060_PBE (0x00004000) /* push buffer bus error */
-#define MMU060_SBE (0x00002000) /* store buffer bus error */
-#define MMU060_PTA (0x00001000) /* pointer A fault */
-#define MMU060_PTB (0x00000800) /* pointer B fault */
-#define MMU060_IL (0x00000400) /* double indirect descr fault */
-#define MMU060_PF (0x00000200) /* page fault (invalid descr) */
-#define MMU060_SP (0x00000100) /* supervisor protection */
-#define MMU060_WP (0x00000080) /* write protection */
-#define MMU060_TWE (0x00000040) /* bus error on table search */
-#define MMU060_RE (0x00000020) /* bus error on read */
-#define MMU060_WE (0x00000010) /* bus error on write */
-#define MMU060_TTR (0x00000008) /* error caused by TTR translation */
-#define MMU060_BPE (0x00000004) /* branch prediction error */
-#define MMU060_SEE (0x00000001) /* software emulated error */
-
-/* cases of missing or invalid descriptors */
-#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \
- MMU060_IL | MMU060_PF)
-/* bits that indicate real errors */
-#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \
- MMU060_WP | MMU060_TWE | MMU060_RE | MMU060_WE)
-
-/* structure for stack frames */
-
-struct frame {
- struct pt_regs ptregs;
- union {
- struct {
- unsigned long iaddr; /* instruction address */
- } fmt2;
- struct {
- unsigned long effaddr; /* effective address */
- } fmt3;
- struct {
- unsigned long effaddr; /* effective address */
- unsigned long pc; /* pc of faulted instr */
- } fmt4;
- struct {
- unsigned long effaddr; /* effective address */
- unsigned short ssw; /* special status word */
- unsigned short wb3s; /* write back 3 status */
- unsigned short wb2s; /* write back 2 status */
- unsigned short wb1s; /* write back 1 status */
- unsigned long faddr; /* fault address */
- unsigned long wb3a; /* write back 3 address */
- unsigned long wb3d; /* write back 3 data */
- unsigned long wb2a; /* write back 2 address */
- unsigned long wb2d; /* write back 2 data */
- unsigned long wb1a; /* write back 1 address */
- unsigned long wb1dpd0; /* write back 1 data/push data 0*/
- unsigned long pd1; /* push data 1*/
- unsigned long pd2; /* push data 2*/
- unsigned long pd3; /* push data 3*/
- } fmt7;
- struct {
- unsigned long iaddr; /* instruction address */
- unsigned short int1[4]; /* internal registers */
- } fmt9;
- struct {
- unsigned short int1;
- unsigned short ssw; /* special status word */
- unsigned short isc; /* instruction stage c */
- unsigned short isb; /* instruction stage b */
- unsigned long daddr; /* data cycle fault address */
- unsigned short int2[2];
- unsigned long dobuf; /* data cycle output buffer */
- unsigned short int3[2];
- } fmta;
- struct {
- unsigned short int1;
- unsigned short ssw; /* special status word */
- unsigned short isc; /* instruction stage c */
- unsigned short isb; /* instruction stage b */
- unsigned long daddr; /* data cycle fault address */
- unsigned short int2[2];
- unsigned long dobuf; /* data cycle output buffer */
- unsigned short int3[4];
- unsigned long baddr; /* stage B address */
- unsigned short int4[2];
- unsigned long dibuf; /* data cycle input buffer */
- unsigned short int5[3];
- unsigned ver : 4; /* stack frame version # */
- unsigned int6:12;
- unsigned short int7[18];
- } fmtb;
- } un;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_TRAPS_H */
+++ /dev/null
-#ifndef _M68K_TYPES_H
-#define _M68K_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* DMA addresses are always 32-bits wide */
-
-typedef u32 dma_addr_t;
-typedef u32 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_TYPES_H */
+++ /dev/null
-#ifndef __M68K_UACCESS_H
-#define __M68K_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <asm/segment.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/* We let the MMU do all checking */
-static inline int access_ok(int type, const void __user *addr,
- unsigned long size)
-{
- return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-extern int __put_user_bad(void);
-extern int __get_user_bad(void);
-
-#define __put_user_asm(res, x, ptr, bwl, reg, err) \
-asm volatile ("\n" \
- "1: moves."#bwl" %2,%1\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- " .even\n" \
- "10: moveq.l %3,%0\n" \
- " jra 2b\n" \
- " .previous\n" \
- "\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,10b\n" \
- " .long 2b,10b\n" \
- " .previous" \
- : "+d" (res), "=m" (*(ptr)) \
- : #reg (x), "i" (err))
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define __put_user(x, ptr) \
-({ \
- typeof(*(ptr)) __pu_val = (x); \
- int __pu_err = 0; \
- __chk_user_ptr(ptr); \
- switch (sizeof (*(ptr))) { \
- case 1: \
- __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \
- break; \
- case 2: \
- __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \
- break; \
- case 4: \
- __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \
- break; \
- case 8: \
- { \
- const void __user *__pu_ptr = (ptr); \
- asm volatile ("\n" \
- "1: moves.l %2,(%1)+\n" \
- "2: moves.l %R2,(%1)\n" \
- "3:\n" \
- " .section .fixup,\"ax\"\n" \
- " .even\n" \
- "10: movel %3,%0\n" \
- " jra 3b\n" \
- " .previous\n" \
- "\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,10b\n" \
- " .long 2b,10b\n" \
- " .long 3b,10b\n" \
- " .previous" \
- : "+d" (__pu_err), "+a" (__pu_ptr) \
- : "r" (__pu_val), "i" (-EFAULT) \
- : "memory"); \
- break; \
- } \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-#define put_user(x, ptr) __put_user(x, ptr)
-
-
-#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \
- type __gu_val; \
- asm volatile ("\n" \
- "1: moves."#bwl" %2,%1\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- " .even\n" \
- "10: move.l %3,%0\n" \
- " sub."#bwl" %1,%1\n" \
- " jra 2b\n" \
- " .previous\n" \
- "\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,10b\n" \
- " .previous" \
- : "+d" (res), "=&" #reg (__gu_val) \
- : "m" (*(ptr)), "i" (err)); \
- (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \
-})
-
-#define __get_user(x, ptr) \
-({ \
- int __gu_err = 0; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \
- break; \
- case 2: \
- __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \
- break; \
- case 4: \
- __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \
- break; \
-/* case 8: disabled because gcc-4.1 has a broken typeof \
- { \
- const void *__gu_ptr = (ptr); \
- u64 __gu_val; \
- asm volatile ("\n" \
- "1: moves.l (%2)+,%1\n" \
- "2: moves.l (%2),%R1\n" \
- "3:\n" \
- " .section .fixup,\"ax\"\n" \
- " .even\n" \
- "10: move.l %3,%0\n" \
- " sub.l %1,%1\n" \
- " sub.l %R1,%R1\n" \
- " jra 3b\n" \
- " .previous\n" \
- "\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,10b\n" \
- " .long 2b,10b\n" \
- " .previous" \
- : "+d" (__gu_err), "=&r" (__gu_val), \
- "+a" (__gu_ptr) \
- : "i" (-EFAULT) \
- : "memory"); \
- (x) = (typeof(*(ptr)))__gu_val; \
- break; \
- } */ \
- default: \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- __gu_err; \
-})
-#define get_user(x, ptr) __get_user(x, ptr)
-
-unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n);
-unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n);
-
-#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
- asm volatile ("\n" \
- "1: moves."#s1" (%2)+,%3\n" \
- " move."#s1" %3,(%1)+\n" \
- "2: moves."#s2" (%2)+,%3\n" \
- " move."#s2" %3,(%1)+\n" \
- " .ifnc \""#s3"\",\"\"\n" \
- "3: moves."#s3" (%2)+,%3\n" \
- " move."#s3" %3,(%1)+\n" \
- " .endif\n" \
- "4:\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,10f\n" \
- " .long 2b,20f\n" \
- " .ifnc \""#s3"\",\"\"\n" \
- " .long 3b,30f\n" \
- " .endif\n" \
- " .previous\n" \
- "\n" \
- " .section .fixup,\"ax\"\n" \
- " .even\n" \
- "10: clr."#s1" (%1)+\n" \
- "20: clr."#s2" (%1)+\n" \
- " .ifnc \""#s3"\",\"\"\n" \
- "30: clr."#s3" (%1)+\n" \
- " .endif\n" \
- " moveq.l #"#n",%0\n" \
- " jra 4b\n" \
- " .previous\n" \
- : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \
- : : "memory")
-
-static __always_inline unsigned long
-__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- unsigned long res = 0, tmp;
-
- switch (n) {
- case 1:
- __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
- break;
- case 2:
- __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2);
- break;
- case 3:
- __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
- break;
- case 4:
- __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4);
- break;
- case 5:
- __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
- break;
- case 6:
- __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
- break;
- case 7:
- __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
- break;
- case 8:
- __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
- break;
- case 9:
- __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
- break;
- case 10:
- __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
- break;
- case 12:
- __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
- break;
- default:
- /* we limit the inlined version to 3 moves */
- return __generic_copy_from_user(to, from, n);
- }
-
- return res;
-}
-
-#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \
- asm volatile ("\n" \
- " move."#s1" (%2)+,%3\n" \
- "11: moves."#s1" %3,(%1)+\n" \
- "12: move."#s2" (%2)+,%3\n" \
- "21: moves."#s2" %3,(%1)+\n" \
- "22:\n" \
- " .ifnc \""#s3"\",\"\"\n" \
- " move."#s3" (%2)+,%3\n" \
- "31: moves."#s3" %3,(%1)+\n" \
- "32:\n" \
- " .endif\n" \
- "4:\n" \
- "\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 11b,5f\n" \
- " .long 12b,5f\n" \
- " .long 21b,5f\n" \
- " .long 22b,5f\n" \
- " .ifnc \""#s3"\",\"\"\n" \
- " .long 31b,5f\n" \
- " .long 32b,5f\n" \
- " .endif\n" \
- " .previous\n" \
- "\n" \
- " .section .fixup,\"ax\"\n" \
- " .even\n" \
- "5: moveq.l #"#n",%0\n" \
- " jra 4b\n" \
- " .previous\n" \
- : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \
- : : "memory")
-
-static __always_inline unsigned long
-__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- unsigned long res = 0, tmp;
-
- switch (n) {
- case 1:
- __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1);
- break;
- case 2:
- __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2);
- break;
- case 3:
- __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,);
- break;
- case 4:
- __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4);
- break;
- case 5:
- __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,);
- break;
- case 6:
- __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,);
- break;
- case 7:
- __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b);
- break;
- case 8:
- __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,);
- break;
- case 9:
- __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b);
- break;
- case 10:
- __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w);
- break;
- case 12:
- __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l);
- break;
- default:
- /* limit the inlined version to 3 moves */
- return __generic_copy_to_user(to, from, n);
- }
-
- return res;
-}
-
-#define __copy_from_user(to, from, n) \
-(__builtin_constant_p(n) ? \
- __constant_copy_from_user(to, from, n) : \
- __generic_copy_from_user(to, from, n))
-
-#define __copy_to_user(to, from, n) \
-(__builtin_constant_p(n) ? \
- __constant_copy_to_user(to, from, n) : \
- __generic_copy_to_user(to, from, n))
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_from_user(to, from, n) __copy_from_user(to, from, n)
-#define copy_to_user(to, from, n) __copy_to_user(to, from, n)
-
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
-unsigned long __clear_user(void __user *to, unsigned long n);
-
-#define clear_user __clear_user
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-#endif /* _M68K_UACCESS_H */
+++ /dev/null
-#ifndef _M68K_UCONTEXT_H
-#define _M68K_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 18
-typedef greg_t gregset_t[NGREG];
-
-typedef struct fpregset {
- int f_fpcntl[3];
- int f_fpregs[8*3];
-} fpregset_t;
-
-struct mcontext {
- int version;
- gregset_t gregs;
- fpregset_t fpregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct mcontext uc_mcontext;
- unsigned long uc_filler[80];
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif
+++ /dev/null
-#ifndef _ASM_M68K_UNALIGNED_H
-#define _ASM_M68K_UNALIGNED_H
-
-/*
- * The m68k can do unaligned accesses itself.
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif /* _ASM_M68K_UNALIGNED_H */
+++ /dev/null
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-#define __NR_vserver 278
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-#define __NR_signalfd4 323
-#define __NR_eventfd2 324
-#define __NR_epoll_create1 325
-#define __NR_dup3 326
-#define __NR_pipe2 327
-#define __NR_inotify_init1 328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
+++ /dev/null
-#ifndef _M68K_USER_H
-#define _M68K_USER_H
-
-/* Core file format: The core file is written in such a way that gdb
- can understand it and provide useful information to the user (under
- linux we use the 'trad-core' bfd). There are quite a number of
- obstacles to being able to view the contents of the floating point
- registers, and until these are solved you will not be able to view the
- contents of them. Actually, you can read in the core file and look at
- the contents of the user struct to find out what the floating point
- registers contain.
- The actual file contents are as follows:
- UPAGE: 1 page consisting of a user struct that tells gdb what is present
- in the file. Directly after this is a copy of the task_struct, which
- is currently not used by gdb, but it may come in useful at some point.
- All of the registers are stored as part of the upage. The upage should
- always be only one page.
- DATA: The data area is stored. We use current->end_text to
- current->brk to pick up all of the user variables, plus any memory
- that may have been malloced. No attempt is made to determine if a page
- is demand-zero or if a page is totally unused, we just cover the entire
- range. All of the addresses are rounded in such a way that an integral
- number of pages is written.
- STACK: We need the stack information in order to get a meaningful
- backtrace. We need to write the data from (esp) to
- current->start_stack, so we round each of these off in order to be able
- to write an integer number of pages.
- The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-struct user_m68kfp_struct {
- unsigned long fpregs[8*3]; /* fp0-fp7 registers */
- unsigned long fpcntl[3]; /* fp control regs */
-};
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
- is still the layout used by user (the new pt_regs doesn't have
- all registers). */
-struct user_regs_struct {
- long d1,d2,d3,d4,d5,d6,d7;
- long a0,a1,a2,a3,a4,a5,a6;
- long d0;
- long usp;
- long orig_d0;
- short stkadj;
- short sr;
- long pc;
- short fmtvec;
- short __fill;
-};
-
-
-/* When the kernel dumps core, it starts by dumping the user struct -
- this will be used by gdb to figure out where the data and stack segments
- are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
- from the ptrace(3,...) function. */
- struct user_regs_struct regs; /* Where the registers are actually stored */
-/* ptrace does not yet supply these. Someday.... */
- int u_fpvalid; /* True if math co-processor being used. */
- /* for this mess. Not yet used. */
- struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */
-/* The rest of this junk is to help gdb figure out what goes where */
- unsigned long int u_tsize; /* Text segment size (pages). */
- unsigned long int u_dsize; /* Data segment size (pages). */
- unsigned long int u_ssize; /* Stack segment size (pages). */
- unsigned long start_code; /* Starting virtual address of text. */
- unsigned long start_stack; /* Starting virtual address of stack area.
- This is actually the bottom of the stack,
- the top of the stack is always found in the
- esp register. */
- long int signal; /* Signal that caused the core dump. */
- int reserved; /* No longer used */
- unsigned long u_ar0; /* Used by gdb to help find the values for */
- /* the registers. */
- struct user_m68kfp_struct* u_fpstate; /* Math Co-processor pointer. */
- unsigned long magic; /* To uniquely identify a core file */
- char u_comm[32]; /* User command that was responsible */
-};
-#define NBPG 4096
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
+++ /dev/null
-#ifndef __VIRT_CONVERT__
-#define __VIRT_CONVERT__
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/mmzone.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-static inline unsigned long virt_to_phys(void *address)
-{
- return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-
-/* Permanent address of a page. */
-#ifdef CONFIG_SINGLE_MEMORY_CHUNK
-#define page_to_phys(page) \
- __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
-#else
-#define page_to_phys(_page) ({ \
- struct page *__page = _page; \
- struct pglist_data *pgdat; \
- pgdat = pg_data_table[page_to_nid(__page)]; \
- page_to_pfn(__page) << PAGE_SHIFT; \
-})
-#endif
-
-/*
- * IO bus memory addresses are 1:1 with the physical address,
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-#endif
-#endif
+++ /dev/null
-#include <asm-generic/xor.h>
+++ /dev/null
-#ifndef _ASM_M68K_ZORRO_H
-#define _ASM_M68K_ZORRO_H
-
-#include <asm/raw_io.h>
-
-#define z_readb raw_inb
-#define z_readw raw_inw
-#define z_readl raw_inl
-
-#define z_writeb raw_outb
-#define z_writew raw_outw
-#define z_writel raw_outl
-
-#define z_memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-
-static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
-}
-
-static inline void __iomem *z_remap_writethrough(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void __iomem *z_remap_fullcache(unsigned long physaddr,
- unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-#define z_unmap iounmap
-#define z_iounmap iounmap
-#define z_ioremap z_remap_nocache_ser
-
-#endif /* _ASM_M68K_ZORRO_H */
_DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */
_DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */
_DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */
- _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */
+ _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking, unsupported */
};
#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
struct drm_file *tag; /**< associated fd private data */
};
-struct drm_vbl_sig {
- struct list_head head;
- unsigned int sequence;
- struct siginfo info;
- struct task_struct *task;
-};
-
/* location of GART table */
#define DRM_ATI_GART_MAIN 1
#define DRM_ATI_GART_FB 2
wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */
atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */
spinlock_t vbl_lock;
- struct list_head *vbl_sigs; /**< signal list to send on VBLANK */
- atomic_t vbl_signal_pending; /* number of signals pending on all crtcs*/
atomic_t *vblank_refcount; /* number of users of vblank interruptsper crtc */
u32 *last_vblank; /* protected by dev->vbl_lock, used */
/* for wraparound handling */
*
*/
struct drm_mode_config {
- struct mutex mutex; /* protects configuration and IDR */
+ struct mutex mutex; /* protects configuration (mode lists etc.) */
+ struct mutex idr_mutex; /* for IDR management */
struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
/* this is limited to one for now */
int num_fb;
while (!atomic_inc_not_zero(&css->refcnt)) {
if (test_bit(CSS_REMOVED, &css->flags))
return false;
+ cpu_relax();
}
return true;
}
return ERR_PTR(-ENODEV);
}
+static inline struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+ struct dentry *parent,
+ size_t *value)
+{
+ return ERR_PTR(-ENODEV);
+}
+
static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode,
struct dentry *parent,
u32 *value)
tx->flags |= DMA_CTRL_ACK;
}
+static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
+{
+ tx->flags &= ~DMA_CTRL_ACK;
+}
+
static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
{
return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
#ifdef CONFIG_DMA_ENGINE
enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
+void dma_issue_pending_all(void);
#else
static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
return DMA_SUCCESS;
}
+static inline void dma_issue_pending_all(void)
+{
+ do { } while (0);
+}
#endif
/* --- DMA device --- */
void dma_async_device_unregister(struct dma_device *device);
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
-void dma_issue_pending_all(void);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
void dma_release_channel(struct dma_chan *chan);
#ifdef CONFIG_DMI
extern int dmi_check_system(const struct dmi_system_id *list);
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
extern const char * dmi_get_system_info(int field);
extern const struct dmi_device * dmi_find_device(int type, const char *name,
const struct dmi_device *from);
{ return -1; }
static inline bool dmi_match(enum dmi_field f, const char *str)
{ return false; }
+static inline const struct dmi_system_id *
+ dmi_first_match(const struct dmi_system_id *list) { return NULL; }
#endif
#define I2C_DRIVERID_SAA7185B 13 /* video encoder */
#define I2C_DRIVERID_SAA7110 22 /* video decoder */
#define I2C_DRIVERID_SAA5249 24 /* SAA5249 and compatibles */
-#define I2C_DRIVERID_PCF8583 25 /* real time clock */
#define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */
-#define I2C_DRIVERID_TVMIXER 28 /* Mixer driver for tv cards */
#define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */
#define I2C_DRIVERID_TDA9875 32 /* TV sound decoder chip */
#define I2C_DRIVERID_BT819 40 /* video decoder */
#define I2C_DRIVERID_SAA7191 57 /* video decoder */
#define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */
#define I2C_DRIVERID_OVCAMCHIP 61 /* OmniVision CMOS image sens. */
-#define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */
#define I2C_DRIVERID_SAA6752HS 67 /* MPEG2 encoder */
#define I2C_DRIVERID_TVEEPROM 68 /* TV EEPROM */
#define I2C_DRIVERID_WM8775 69 /* wm8775 audio processor */
#define I2C_DRIVERID_CX25840 71 /* cx2584x video encoder */
#define I2C_DRIVERID_SAA7127 72 /* saa7127 video encoder */
#define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */
-#define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */
#define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */
#define I2C_DRIVERID_TVP5150 76 /* TVP5150 video decoder */
#define I2C_DRIVERID_WM8739 77 /* wm8739 audio processor */
#define I2C_DRIVERID_UPD64083 78 /* upd64083 video processor */
#define I2C_DRIVERID_UPD64031A 79 /* upd64031a video processor */
#define I2C_DRIVERID_SAA717X 80 /* saa717x video encoder */
-#define I2C_DRIVERID_DS1672 81 /* Dallas/Maxim DS1672 RTC */
#define I2C_DRIVERID_BT866 85 /* Conexant bt866 video encoder */
#define I2C_DRIVERID_KS0127 86 /* Samsung ks0127 video decoder */
#define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */
-#define I2C_DRIVERID_WM8731 89 /* Wolfson WM8731 audio codec */
-#define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */
-#define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
-#define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
#define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */
-#define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */
#define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */
#define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */
*/
/* --- Bit algorithm adapters */
-#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
-#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */
-#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_I810 0x01000a /* Intel I810 */
-#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */
-#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */
#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */
-#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */
#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */
-#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */
#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_NVIDIA 0x01001c /* nvidia framebuffer driver */
-#define I2C_HW_B_SAVAGE 0x01001d /* savage framebuffer driver */
-#define I2C_HW_B_RADEON 0x01001e /* radeon framebuffer driver */
#define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */
#define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_INTELFB 0x010021 /* intel framebuffer driver */
#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */
-/* --- PCF 8584 based algorithms */
-#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */
-
-/* --- PCA 9564 based algorithms */
-#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
-
-/* --- PowerPC on-chip adapters */
-#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
-
-/* --- Broadcom SiByte adapters */
-#define I2C_HW_SIBYTE 0x150000
-
/* --- SGI adapters */
#define I2C_HW_SGI_VINO 0x160000
-/* --- XSCALE on-chip adapters */
-#define I2C_HW_IOP3XX 0x140000
-
-/* --- Au1550 PSC adapters adapters */
-#define I2C_HW_AU1550_PSC 0x1b0000
-
/* --- SMBus only adapters */
-#define I2C_HW_SMBUS_PIIX4 0x040000
-#define I2C_HW_SMBUS_ALI15X3 0x040001
-#define I2C_HW_SMBUS_VIA2 0x040002
-#define I2C_HW_SMBUS_I801 0x040004
-#define I2C_HW_SMBUS_AMD756 0x040005
-#define I2C_HW_SMBUS_SIS5595 0x040006
-#define I2C_HW_SMBUS_ALI1535 0x040007
-#define I2C_HW_SMBUS_SIS630 0x040008
-#define I2C_HW_SMBUS_SIS96X 0x040009
-#define I2C_HW_SMBUS_AMD8111 0x04000a
-#define I2C_HW_SMBUS_SCX200 0x04000b
-#define I2C_HW_SMBUS_NFORCE2 0x04000c
#define I2C_HW_SMBUS_W9968CF 0x04000d
#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */
#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */
#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */
-#define I2C_HW_SMBUS_ALI1563 0x040013
-
-/* --- MCP107 adapter */
-#define I2C_HW_MPC107 0x0d0000
-
-/* --- Embedded adapters */
-#define I2C_HW_MV64XXX 0x190000
-#define I2C_HW_BLACKFIN 0x190001 /* ADI Blackfin I2C TWI driver */
/* --- Miscellaneous adapters */
#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */
* has been dynamically allocated by the driver in the function above,
* it must be freed here. (LEGACY I2C DRIVERS ONLY)
*/
- int (*detach_client)(struct i2c_client *);
+ int (*detach_client)(struct i2c_client *) __deprecated;
/* Standard driver model interfaces, for "new style" i2c drivers.
* With the driver model, device enumeration is NEVER done by drivers;
return i2c_register_driver(THIS_MODULE, driver);
}
-extern int i2c_attach_client(struct i2c_client *);
-extern int i2c_detach_client(struct i2c_client *);
+/* These are deprecated, your driver should use the standard .probe()
+ * and .remove() methods instead. */
+extern int __deprecated i2c_attach_client(struct i2c_client *);
+extern int __deprecated i2c_detach_client(struct i2c_client *);
extern struct i2c_client *i2c_use_client(struct i2c_client *client);
extern void i2c_release_client(struct i2c_client *client);
#include <linux/if.h>
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
/* Structures and constants associated with the DLCI device driver */
struct dlci_add
#ifdef __KERNEL__
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
/* these are the fields of an RFC 1490 header */
struct frhdr
{
int buffer; /* current buffer for S508 firmware */
};
-#endif /* __KERNEL__ */
-
#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
-#ifdef __KERNEL__
extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-#endif
+
+#endif /* __KERNEL__ */
#endif
.posix_timers = LIST_HEAD_INIT(sig.posix_timers), \
.cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \
.rlim = INIT_RLIMITS, \
+ .cputime = { .totals = { \
+ .utime = cputime_zero, \
+ .stime = cputime_zero, \
+ .sum_exec_runtime = 0, \
+ .lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock), \
+ }, }, \
}
extern struct nsproxy init_nsproxy;
struct list_head k_list;
void (*get)(struct klist_node *);
void (*put)(struct klist_node *);
-};
+} __attribute__ ((aligned (4)));
#define KLIST_INIT(_name, _get, _put) \
{ .k_lock = __SPIN_LOCK_UNLOCKED(_name.k_lock), \
/* Attach to insert probes on any functions which should be ignored*/
#define __kprobes __attribute__((__section__(".kprobes.text"))) notrace
+#else /* CONFIG_KPROBES */
+typedef int kprobe_opcode_t;
+struct arch_specific_insn {
+ int dummy;
+};
+#define __kprobes notrace
+#endif /* CONFIG_KPROBES */
struct kprobe;
struct pt_regs;
/* For backward compatibility with old code using JPROBE_ENTRY() */
#define JPROBE_ENTRY(handler) (handler)
-DECLARE_PER_CPU(struct kprobe *, current_kprobe);
-DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-#ifdef CONFIG_KRETPROBES
-extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
- struct pt_regs *regs);
-extern int arch_trampoline_kprobe(struct kprobe *p);
-#else /* CONFIG_KRETPROBES */
-static inline void arch_prepare_kretprobe(struct kretprobe *rp,
- struct pt_regs *regs)
-{
-}
-static inline int arch_trampoline_kprobe(struct kprobe *p)
-{
- return 0;
-}
-#endif /* CONFIG_KRETPROBES */
/*
* Function-return probe -
* Note:
unsigned long range;
};
+#ifdef CONFIG_KPROBES
+DECLARE_PER_CPU(struct kprobe *, current_kprobe);
+DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+#ifdef CONFIG_KRETPROBES
+extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
+ struct pt_regs *regs);
+extern int arch_trampoline_kprobe(struct kprobe *p);
+#else /* CONFIG_KRETPROBES */
+static inline void arch_prepare_kretprobe(struct kretprobe *rp,
+ struct pt_regs *regs)
+{
+}
+static inline int arch_trampoline_kprobe(struct kprobe *p)
+{
+ return 0;
+}
+#endif /* CONFIG_KRETPROBES */
+
extern struct kretprobe_blackpoint kretprobe_blacklist[];
static inline void kretprobe_assert(struct kretprobe_instance *ri,
#else /* CONFIG_KPROBES */
-#define __kprobes notrace
-struct jprobe;
-struct kretprobe;
-
static inline struct kprobe *get_kprobe(void *addr)
{
return NULL;
ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD
* doesn't handle PIO interrupts */
ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */
+ ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
+ ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
ATA_FLAG_DEBUGMSG = (1 << 13),
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
struct dmi_strmatch matches[4];
void *driver_data;
};
+/*
+ * struct dmi_device_id appears during expansion of
+ * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
+ * but this is enough for gcc 3.4.6 to error out:
+ * error: storage size of '__mod_dmi_device_table' isn't known
+ */
+#define dmi_device_id dmi_system_id
#endif
#define DMI_MATCH(a, b) { a, b }
#define PCI_UNKNOWN ((pci_power_t __force) 5)
#define PCI_POWER_ERROR ((pci_power_t __force) -1)
+#define PCI_PM_D2_DELAY 200
+#define PCI_PM_D3_WAIT 10
+#define PCI_PM_BUS_WAIT 50
+
/** The pci_channel state describes connectivity between the CPU and
* the pci device. If some PCI bus between here and the pci device
* has crashed or locked up, this info is reflected here.
unsigned int ari_enabled:1; /* ARI forwarding */
unsigned int is_managed:1;
unsigned int is_pcie:1;
+ unsigned int state_saved:1;
pci_dev_flags_t dev_flags;
atomic_t enable_cnt; /* pci_enable_device has been called */
#define PCI_DEVICE_ID_VIA_8783_0 0x3208
#define PCI_DEVICE_ID_VIA_8237 0x3227
#define PCI_DEVICE_ID_VIA_8251 0x3287
+#define PCI_DEVICE_ID_VIA_8261 0x3402
#define PCI_DEVICE_ID_VIA_8237A 0x3337
#define PCI_DEVICE_ID_VIA_8237S 0x3372
#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324
#define PCI_DEVICE_ID_VIA_CX700 0x8324
#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581
#define PCI_DEVICE_ID_VIA_VX800 0x8353
+#define PCI_DEVICE_ID_VIA_VX855 0x8409
#define PCI_DEVICE_ID_VIA_8371_1 0x8391
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
+#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409
+#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
int dquot_initialize(struct inode *inode, int type);
int dquot_drop(struct inode *inode);
-int dquot_drop_locked(struct inode *inode);
struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
void dqput(struct dquot *dquot);
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type);
int dquot_scan_active(struct super_block *sb,
int (*fn)(struct dquot *dquot, unsigned long priv),
unsigned long priv);
extern void softlockup_tick(void);
extern void touch_softlockup_watchdog(void);
extern void touch_all_softlockup_watchdogs(void);
+extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+ struct file *filp, void __user *buffer,
+ size_t *lenp, loff_t *ppos);
extern unsigned int softlockup_panic;
extern unsigned long sysctl_hung_task_check_count;
extern unsigned long sysctl_hung_task_timeout_secs;
cputime_t utime;
cputime_t stime;
unsigned long long sum_exec_runtime;
+ spinlock_t lock;
};
/* Alternate field names when used to cache expirations. */
#define prof_exp stime
* used for thread group CPU clock calculations.
*/
struct thread_group_cputime {
- struct task_cputime *totals;
+ struct task_cputime totals;
};
/*
atomic_t inotify_devs; /* How many inotify devs does this user have opened? */
#endif
#ifdef CONFIG_EPOLL
- atomic_t epoll_devs; /* The number of epoll descriptors currently open */
atomic_t epoll_watches; /* The number of file descriptors currently watched */
#endif
#ifdef CONFIG_POSIX_MQUEUE
* Thread group CPU time accounting.
*/
-extern int thread_group_cputime_alloc(struct task_struct *);
-extern void thread_group_cputime(struct task_struct *, struct task_cputime *);
-
-static inline void thread_group_cputime_init(struct signal_struct *sig)
+static inline
+void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
{
- sig->cputime.totals = NULL;
+ struct task_cputime *totals = &tsk->signal->cputime.totals;
+ unsigned long flags;
+
+ spin_lock_irqsave(&totals->lock, flags);
+ *times = *totals;
+ spin_unlock_irqrestore(&totals->lock, flags);
}
-static inline int thread_group_cputime_clone_thread(struct task_struct *curr)
+static inline void thread_group_cputime_init(struct signal_struct *sig)
{
- if (curr->signal->cputime.totals)
- return 0;
- return thread_group_cputime_alloc(curr);
+ sig->cputime.totals = (struct task_cputime){
+ .utime = cputime_zero,
+ .stime = cputime_zero,
+ .sum_exec_runtime = 0,
+ };
+
+ spin_lock_init(&sig->cputime.totals.lock);
}
static inline void thread_group_cputime_free(struct signal_struct *sig)
{
- free_percpu(sig->cputime.totals);
}
/*
extern void hibernate_nvs_free(void);
extern void hibernate_nvs_save(void);
extern void hibernate_nvs_restore(void);
+extern bool system_entering_hibernation(void);
#else /* CONFIG_HIBERNATION */
static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
static inline void swsusp_set_page_free(struct page *p) {}
static inline void hibernate_nvs_free(void) {}
static inline void hibernate_nvs_save(void) {}
static inline void hibernate_nvs_restore(void) {}
+static inline bool system_entering_hibernation(void) { return false; }
#endif /* CONFIG_HIBERNATION */
#ifdef CONFIG_PM_SLEEP
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
"\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
#else
+#ifdef CONFIG_ALPHA
+#define SYSCALL_ALIAS(alias, name) \
+ asm ( #alias " = " #name "\n\t.globl " #alias)
+#else
#define SYSCALL_ALIAS(alias, name) \
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
#endif
+#endif
#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
* @autosuspend_disabled: autosuspend disabled by the user
* @autoresume_disabled: autoresume disabled by the user
* @skip_sys_resume: skip the next system resume
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ * specific data for the device.
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
#define devdbg(usbnet, fmt, arg...) \
printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
#else
-#define devdbg(usbnet, fmt, arg...) do {} while(0)
+#define devdbg(usbnet, fmt, arg...) \
+ ({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \
+ ## arg); 0; })
#endif
#define deverr(usbnet, fmt, arg...) \
init_timer(&(_work)->timer); \
} while (0)
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \
+ do { \
+ INIT_WORK(&(_work)->work, (_func)); \
+ init_timer_on_stack(&(_work)->timer); \
+ } while (0)
+
#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func) \
do { \
INIT_WORK(&(_work)->work, (_func)); \
init_timer_deferrable(&(_work)->timer); \
} while (0)
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \
+ do { \
+ INIT_WORK(&(_work)->work, (_func)); \
+ init_timer_on_stack(&(_work)->timer); \
+ } while (0)
+
/**
* work_pending - Find out whether a work item is currently pending
* @work: The work item in question
* @control: union for control data
* @status: union for status data
* @driver_data: array of driver_data pointers
- * @retry_count: number of retries
* @ampdu_ack_len: number of aggregated frames.
* relevant only if IEEE80211_TX_STATUS_AMPDU was set.
* @ampdu_ack_map: block ack bit map for the aggregation.
static inline __be32 sctp_end_cksum(__be32 crc32)
{
- return ~crc32;
+ return (__force __be32)~cpu_to_le32((__force u32)crc32);
}
#define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
- .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1 \
+ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
def_bool y
depends on AUDITSYSCALL && INOTIFY
+menu "RCU Subsystem"
+
+choice
+ prompt "RCU Implementation"
+ default CLASSIC_RCU
+
+config CLASSIC_RCU
+ bool "Classic RCU"
+ help
+ This option selects the classic RCU implementation that is
+ designed for best read-side performance on non-realtime
+ systems.
+
+ Select this option if you are unsure.
+
+config TREE_RCU
+ bool "Tree-based hierarchical RCU"
+ help
+ This option selects the RCU implementation that is
+ designed for very large SMP system with hundreds or
+ thousands of CPUs.
+
+config PREEMPT_RCU
+ bool "Preemptible RCU"
+ depends on PREEMPT
+ help
+ This option reduces the latency of the kernel by making certain
+ RCU sections preemptible. Normally RCU code is non-preemptible, if
+ this option is selected then read-only RCU sections become
+ preemptible. This helps latency, but may expose bugs due to
+ now-naive assumptions about each RCU read-side critical section
+ remaining on a given CPU through its execution.
+
+endchoice
+
+config RCU_TRACE
+ bool "Enable tracing for RCU"
+ depends on TREE_RCU || PREEMPT_RCU
+ help
+ This option provides tracing in RCU which presents stats
+ in debugfs for debugging RCU implementation.
+
+ Say Y here if you want to enable RCU tracing
+ Say N if you are unsure.
+
+config RCU_FANOUT
+ int "Tree-based hierarchical RCU fanout value"
+ range 2 64 if 64BIT
+ range 2 32 if !64BIT
+ depends on TREE_RCU
+ default 64 if 64BIT
+ default 32 if !64BIT
+ help
+ This option controls the fanout of hierarchical implementations
+ of RCU, allowing RCU to work efficiently on machines with
+ large numbers of CPUs. This value must be at least the cube
+ root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
+ systems and up to 262,144 for 64-bit systems.
+
+ Select a specific number if testing RCU itself.
+ Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+ bool "Disable tree-based hierarchical RCU auto-balancing"
+ depends on TREE_RCU
+ default n
+ help
+ This option forces use of the exact RCU_FANOUT value specified,
+ regardless of imbalances in the hierarchy. This is useful for
+ testing RCU itself, and might one day be useful on systems with
+ strong NUMA behavior.
+
+ Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+ Say N if unsure.
+
+config TREE_RCU_TRACE
+ def_bool RCU_TRACE && TREE_RCU
+ select DEBUG_FS
+ help
+ This option provides tracing for the TREE_RCU implementation,
+ permitting Makefile to trivially select kernel/rcutree_trace.c.
+
+config PREEMPT_RCU_TRACE
+ def_bool RCU_TRACE && PREEMPT_RCU
+ select DEBUG_FS
+ help
+ This option provides tracing for the PREEMPT_RCU implementation,
+ permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+
+endmenu # "RCU Subsystem"
+
config IKCONFIG
tristate "Kernel .config support"
---help---
Unless you want to work with an experimental feature
say N here.
+config NET_NS
+ bool "Network namespace"
+ default n
+ depends on NAMESPACES && EXPERIMENTAL && NET
+ help
+ Allow user space to create what appear to be multiple instances
+ of the network stack.
+
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
depends on BROKEN || !FRV
Say N.
-config KALLSYMS_STRIP_GENERATED
- bool "Strip machine generated symbols from kallsyms"
- depends on KALLSYMS_ALL
- default y
- help
- Say N if you want kallsyms to retain even machine generated symbols.
-
config KALLSYMS_EXTRA_PASS
bool "Do an extra kallsyms pass"
depends on KALLSYMS
config PREEMPT_NOTIFIERS
bool
-choice
- prompt "RCU Implementation"
- default CLASSIC_RCU
-
-config CLASSIC_RCU
- bool "Classic RCU"
- help
- This option selects the classic RCU implementation that is
- designed for best read-side performance on non-realtime
- systems.
-
- Select this option if you are unsure.
-
-config TREE_RCU
- bool "Tree-based hierarchical RCU"
- help
- This option selects the RCU implementation that is
- designed for very large SMP system with hundreds or
- thousands of CPUs.
-
-config PREEMPT_RCU
- bool "Preemptible RCU"
- depends on PREEMPT
- help
- This option reduces the latency of the kernel by making certain
- RCU sections preemptible. Normally RCU code is non-preemptible, if
- this option is selected then read-only RCU sections become
- preemptible. This helps latency, but may expose bugs due to
- now-naive assumptions about each RCU read-side critical section
- remaining on a given CPU through its execution.
-
-endchoice
-
-config RCU_TRACE
- bool "Enable tracing for RCU"
- depends on TREE_RCU || PREEMPT_RCU
- help
- This option provides tracing in RCU which presents stats
- in debugfs for debugging RCU implementation.
-
- Say Y here if you want to enable RCU tracing
- Say N if you are unsure.
-
-config RCU_FANOUT
- int "Tree-based hierarchical RCU fanout value"
- range 2 64 if 64BIT
- range 2 32 if !64BIT
- depends on TREE_RCU
- default 64 if 64BIT
- default 32 if !64BIT
- help
- This option controls the fanout of hierarchical implementations
- of RCU, allowing RCU to work efficiently on machines with
- large numbers of CPUs. This value must be at least the cube
- root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
- systems and up to 262,144 for 64-bit systems.
-
- Select a specific number if testing RCU itself.
- Take the default if unsure.
-
-config RCU_FANOUT_EXACT
- bool "Disable tree-based hierarchical RCU auto-balancing"
- depends on TREE_RCU
- default n
- help
- This option forces use of the exact RCU_FANOUT value specified,
- regardless of imbalances in the hierarchy. This is useful for
- testing RCU itself, and might one day be useful on systems with
- strong NUMA behavior.
-
- Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
-
- Say N if unsure.
-
-config TREE_RCU_TRACE
- def_bool RCU_TRACE && TREE_RCU
- select DEBUG_FS
- help
- This option provides tracing for the TREE_RCU implementation,
- permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
- def_bool RCU_TRACE && PREEMPT_RCU
- select DEBUG_FS
- help
- This option provides tracing for the PREEMPT_RCU implementation,
- permitting Makefile to trivially select kernel/rcupreempt_trace.c.
}
write_unlock(&css_set_lock);
- list_del(&root->root_list);
- root_count--;
+ if (!list_empty(&root->root_list)) {
+ list_del(&root->root_list);
+ root_count--;
+ }
mutex_unlock(&cgroup_mutex);
err_remove:
+ cgroup_lock_hierarchy(root);
list_del(&cgrp->sibling);
+ cgroup_unlock_hierarchy(root);
root->number_of_cgroups--;
err_destroy:
for_each_subsys(cgrp->root, ss) {
struct cgroup_subsys_state *css = cgrp->subsys[ss->subsys_id];
int refcnt;
- do {
+ while (1) {
/* We can only remove a CSS with a refcnt==1 */
refcnt = atomic_read(&css->refcnt);
if (refcnt > 1) {
* css_tryget() to spin until we set the
* CSS_REMOVED bits or abort
*/
- } while (atomic_cmpxchg(&css->refcnt, refcnt, 0) != refcnt);
+ if (atomic_cmpxchg(&css->refcnt, refcnt, 0) == refcnt)
+ break;
+ cpu_relax();
+ }
}
done:
for_each_subsys(cgrp->root, ss) {
mutex_unlock(&cgroup_mutex);
return 0;
}
- task_lock(tsk);
- cg = tsk->cgroups;
- parent = task_cgroup(tsk, subsys->subsys_id);
/* Pin the hierarchy */
- if (!atomic_inc_not_zero(&parent->root->sb->s_active)) {
+ if (!atomic_inc_not_zero(&root->sb->s_active)) {
/* We race with the final deactivate_super() */
mutex_unlock(&cgroup_mutex);
return 0;
}
/* Keep the cgroup alive */
+ task_lock(tsk);
+ parent = task_cgroup(tsk, subsys->subsys_id);
+ cg = tsk->cgroups;
get_css_set(cg);
task_unlock(tsk);
+
mutex_unlock(&cgroup_mutex);
/* Now do the VFS work to create a cgroup */
mutex_unlock(&inode->i_mutex);
put_css_set(cg);
- deactivate_super(parent->root->sb);
+ deactivate_super(root->sb);
/* The cgroup is still accessible in the VFS, but
* we're not going to try to rmdir() it at this
* point. */
mutex_lock(&cgroup_mutex);
put_css_set(cg);
mutex_unlock(&cgroup_mutex);
- deactivate_super(parent->root->sb);
+ deactivate_super(root->sb);
return ret;
}
* @size: size of requested memory area
* @dma_handle: This will be filled with the correct dma handle
* @ret: This pointer will be filled with the virtual address
- * to allocated area.
+ * to allocated area.
*
* This function should be only called from per-arch dma_alloc_coherent()
* to support allocation from per-device coherent memory pools.
mem = dev->dma_mem;
if (!mem)
return 0;
- if (unlikely(size > mem->size))
- return 0;
+
+ *ret = NULL;
+
+ if (unlikely(size > (mem->size << PAGE_SHIFT)))
+ goto err;
pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
- if (pageno >= 0) {
- /*
- * Memory was found in the per-device arena.
- */
- *dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
- *ret = mem->virt_base + (pageno << PAGE_SHIFT);
- memset(*ret, 0, size);
- } else if (mem->flags & DMA_MEMORY_EXCLUSIVE) {
- /*
- * The per-device arena is exhausted and we are not
- * permitted to fall back to generic memory.
- */
- *ret = NULL;
- } else {
- /*
- * The per-device arena is exhausted and we are
- * permitted to fall back to generic memory.
- */
- return 0;
- }
+ if (unlikely(pageno < 0))
+ goto err;
+
+ /*
+ * Memory was found in the per-device area.
+ */
+ *dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
+ *ret = mem->virt_base + (pageno << PAGE_SHIFT);
+ memset(*ret, 0, size);
+
return 1;
+
+err:
+ /*
+ * In the case where the allocation can not be satisfied from the
+ * per-device area, try to fall back to generic memory if the
+ * constraints allow it.
+ */
+ return mem->flags & DMA_MEMORY_EXCLUSIVE;
}
EXPORT_SYMBOL(dma_alloc_from_coherent);
static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
{
struct signal_struct *sig;
- int ret;
if (clone_flags & CLONE_THREAD) {
- ret = thread_group_cputime_clone_thread(current);
- if (likely(!ret)) {
- atomic_inc(¤t->signal->count);
- atomic_inc(¤t->signal->live);
- }
- return ret;
+ atomic_inc(¤t->signal->count);
+ atomic_inc(¤t->signal->live);
+ return 0;
}
sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
+
+ if (sig)
+ posix_cpu_timers_init_group(sig);
+
tsk->signal = sig;
if (!sig)
return -ENOMEM;
memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
task_unlock(current->group_leader);
- posix_cpu_timers_init_group(sig);
-
acct_init_pacct(&sig->pacct);
tty_audit_fork(sig);
*/
void hres_timers_resume(void)
{
- /* Retrigger the CPU local events: */
+ WARN_ONCE(!irqs_disabled(),
+ KERN_INFO "hres_timers_resume() called with IRQs enabled!");
+
retrigger_next_event(NULL);
}
ack_bad_irq(irq);
}
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+static void __init init_irq_default_affinity(void)
+{
+ alloc_bootmem_cpumask_var(&irq_default_affinity);
+ cpumask_setall(irq_default_affinity);
+}
+#else
+static void __init init_irq_default_affinity(void)
+{
+}
+#endif
+
/*
* Linux has a controller-independent interrupt architecture.
* Every controller has a 'controller-template', that is used
int legacy_count;
int i;
+ init_irq_default_affinity();
+
desc = irq_desc_legacy;
legacy_count = ARRAY_SIZE(irq_desc_legacy);
int count;
int i;
+ init_irq_default_affinity();
+
desc = irq_desc;
count = ARRAY_SIZE(irq_desc);
#include "internals.h"
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
cpumask_var_t irq_default_affinity;
-static int init_irq_default_affinity(void)
-{
- alloc_cpumask_var(&irq_default_affinity, GFP_KERNEL);
- cpumask_setall(irq_default_affinity);
- return 0;
-}
-core_initcall(init_irq_default_affinity);
-
/**
* synchronize_irq - wait for pending IRQ handlers (on other CPUs)
* @irq: interrupt number to wait for
#define all_var 0
#endif
-extern const unsigned long kallsyms_addresses[];
-extern const u8 kallsyms_names[];
+/* These will be re-linked against their real values during the second link stage */
+extern const unsigned long kallsyms_addresses[] __attribute__((weak));
+extern const u8 kallsyms_names[] __attribute__((weak));
/* tell the compiler that the count isn't in the small data section if the arch
* has one (eg: FRV)
*/
extern const unsigned long kallsyms_num_syms
- __attribute__((__section__(".rodata")));
+__attribute__((weak, section(".rodata")));
-extern const u8 kallsyms_token_table[];
-extern const u16 kallsyms_token_index[];
+extern const u8 kallsyms_token_table[] __attribute__((weak));
+extern const u16 kallsyms_token_index[] __attribute__((weak));
-extern const unsigned long kallsyms_markers[];
+extern const unsigned long kallsyms_markers[] __attribute__((weak));
static inline int is_kernel_inittext(unsigned long addr)
{
unsigned long symbol_start = 0, symbol_end = 0;
unsigned long i, low, high, mid;
+ /* This kernel should never had been booted. */
+ BUG_ON(!kallsyms_addresses);
+
/* do a binary search on the sorted kallsyms_addresses array */
low = 0;
high = kallsyms_num_syms;
#include <asm/uaccess.h>
#include <linux/kernel_stat.h>
-/*
- * Allocate the thread_group_cputime structure appropriately and fill in the
- * current values of the fields. Called from copy_signal() via
- * thread_group_cputime_clone_thread() when adding a second or subsequent
- * thread to a thread group. Assumes interrupts are enabled when called.
- */
-int thread_group_cputime_alloc(struct task_struct *tsk)
-{
- struct signal_struct *sig = tsk->signal;
- struct task_cputime *cputime;
-
- /*
- * If we have multiple threads and we don't already have a
- * per-CPU task_cputime struct (checked in the caller), allocate
- * one and fill it in with the times accumulated so far. We may
- * race with another thread so recheck after we pick up the sighand
- * lock.
- */
- cputime = alloc_percpu(struct task_cputime);
- if (cputime == NULL)
- return -ENOMEM;
- spin_lock_irq(&tsk->sighand->siglock);
- if (sig->cputime.totals) {
- spin_unlock_irq(&tsk->sighand->siglock);
- free_percpu(cputime);
- return 0;
- }
- sig->cputime.totals = cputime;
- cputime = per_cpu_ptr(sig->cputime.totals, smp_processor_id());
- cputime->utime = tsk->utime;
- cputime->stime = tsk->stime;
- cputime->sum_exec_runtime = tsk->se.sum_exec_runtime;
- spin_unlock_irq(&tsk->sighand->siglock);
- return 0;
-}
-
-/**
- * thread_group_cputime - Sum the thread group time fields across all CPUs.
- *
- * @tsk: The task we use to identify the thread group.
- * @times: task_cputime structure in which we return the summed fields.
- *
- * Walk the list of CPUs to sum the per-CPU time fields in the thread group
- * time structure.
- */
-void thread_group_cputime(
- struct task_struct *tsk,
- struct task_cputime *times)
-{
- struct task_cputime *totals, *tot;
- int i;
-
- totals = tsk->signal->cputime.totals;
- if (!totals) {
- times->utime = tsk->utime;
- times->stime = tsk->stime;
- times->sum_exec_runtime = tsk->se.sum_exec_runtime;
- return;
- }
-
- times->stime = times->utime = cputime_zero;
- times->sum_exec_runtime = 0;
- for_each_possible_cpu(i) {
- tot = per_cpu_ptr(totals, i);
- times->utime = cputime_add(times->utime, tot->utime);
- times->stime = cputime_add(times->stime, tot->stime);
- times->sum_exec_runtime += tot->sum_exec_runtime;
- }
-}
-
/*
* Called after updating RLIMIT_CPU to set timer expiration if necessary.
*/
mutex_unlock(&pm_mutex);
}
+static bool entering_platform_hibernation;
+
+bool system_entering_hibernation(void)
+{
+ return entering_platform_hibernation;
+}
+EXPORT_SYMBOL(system_entering_hibernation);
+
#ifdef CONFIG_PM_DEBUG
static void hibernation_debug_sleep(void)
{
if (error)
goto Close;
+ entering_platform_hibernation = true;
suspend_console();
error = device_suspend(PMSG_HIBERNATE);
if (error) {
Finish:
hibernation_ops->finish();
Resume_devices:
+ entering_platform_hibernation = false;
device_resume(PMSG_RESTORE);
resume_console();
Close:
raise_rcu_softirq();
}
-static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
+static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
struct rcu_data *rdp)
{
unsigned long flags;
* access due to the fact that this CPU cannot possibly have any RCU
* callbacks in flight yet.
*/
-static void
+static void __cpuinit
rcu_init_percpu_data(int cpu, struct rcu_state *rsp)
{
unsigned long flags;
mutex_lock(&relay_channels_mutex);
/* Is chan already set up? */
- if (unlikely(chan->has_base_filename))
+ if (unlikely(chan->has_base_filename)) {
+ mutex_unlock(&relay_channels_mutex);
return -EEXIST;
+ }
chan->has_base_filename = 1;
chan->parent = parent;
curr_cpu = get_cpu();
static inline void account_group_user_time(struct task_struct *tsk,
cputime_t cputime)
{
+ struct task_cputime *times;
struct signal_struct *sig;
/* tsk == current, ensure it is safe to use ->signal */
return;
sig = tsk->signal;
- if (sig->cputime.totals) {
- struct task_cputime *times;
+ times = &sig->cputime.totals;
- times = per_cpu_ptr(sig->cputime.totals, get_cpu());
- times->utime = cputime_add(times->utime, cputime);
- put_cpu_no_resched();
- }
+ spin_lock(×->lock);
+ times->utime = cputime_add(times->utime, cputime);
+ spin_unlock(×->lock);
}
/**
static inline void account_group_system_time(struct task_struct *tsk,
cputime_t cputime)
{
+ struct task_cputime *times;
struct signal_struct *sig;
/* tsk == current, ensure it is safe to use ->signal */
return;
sig = tsk->signal;
- if (sig->cputime.totals) {
- struct task_cputime *times;
+ times = &sig->cputime.totals;
- times = per_cpu_ptr(sig->cputime.totals, get_cpu());
- times->stime = cputime_add(times->stime, cputime);
- put_cpu_no_resched();
- }
+ spin_lock(×->lock);
+ times->stime = cputime_add(times->stime, cputime);
+ spin_unlock(×->lock);
}
/**
static inline void account_group_exec_runtime(struct task_struct *tsk,
unsigned long long ns)
{
+ struct task_cputime *times;
struct signal_struct *sig;
sig = tsk->signal;
if (unlikely(!sig))
return;
- if (sig->cputime.totals) {
- struct task_cputime *times;
+ times = &sig->cputime.totals;
- times = per_cpu_ptr(sig->cputime.totals, get_cpu());
- times->sum_exec_runtime += ns;
- put_cpu_no_resched();
- }
+ spin_lock(×->lock);
+ times->sum_exec_runtime += ns;
+ spin_unlock(×->lock);
}
#include <linux/lockdep.h>
#include <linux/notifier.h>
#include <linux/module.h>
+#include <linux/sysctl.h>
#include <asm/irq_regs.h>
}
EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
+int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+ struct file *filp, void __user *buffer,
+ size_t *lenp, loff_t *ppos)
+{
+ touch_all_softlockup_watchdogs();
+ return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+}
+
/*
* This callback runs from the timer interrupt, and checks
* whether the watchdog thread has hung or not:
.data = &softlockup_thresh,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_dointvec_minmax,
+ .proc_handler = &proc_dosoftlockup_thresh,
.strategy = &sysctl_intvec,
.extra1 = &neg_one,
.extra2 = &sixty,
* value. We do this unconditionally on any cpu, as we don't know whether the
* cpu, which has the update task assigned is in a long sleep.
*/
-void tick_nohz_update_jiffies(void)
+static void tick_nohz_update_jiffies(void)
{
int cpu = smp_processor_id();
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
}
#ifdef CONFIG_SMP
+static struct workqueue_struct *work_on_cpu_wq __read_mostly;
+
struct work_for_cpu {
struct work_struct work;
long (*fn)(void *);
* @fn: the function to run
* @arg: the function arg
*
- * This will return -EINVAL in the cpu is not online, or the return value
- * of @fn otherwise.
+ * This will return the value @fn returns.
+ * It is up to the caller to ensure that the cpu doesn't go offline.
*/
long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
{
INIT_WORK(&wfc.work, do_work_for_cpu);
wfc.fn = fn;
wfc.arg = arg;
- get_online_cpus();
- if (unlikely(!cpu_online(cpu)))
- wfc.ret = -EINVAL;
- else {
- schedule_work_on(cpu, &wfc.work);
- flush_work(&wfc.work);
- }
- put_online_cpus();
+ queue_work_on(cpu, work_on_cpu_wq, &wfc.work);
+ flush_work(&wfc.work);
return wfc.ret;
}
hotcpu_notifier(workqueue_cpu_callback, 0);
keventd_wq = create_workqueue("events");
BUG_ON(!keventd_wq);
+#ifdef CONFIG_SMP
+ work_on_cpu_wq = create_workqueue("work_on_cpu");
+ BUG_ON(!work_on_cpu_wq);
+#endif
}
This is a relatively cheap check but if you care about maximum
performance, say N.
+#
+# Select this config option from the architecture Kconfig, if it
+# it is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+ bool
+ help
+
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && \
Say N here if you want the RCU torture tests to start only
after being manually enabled via /proc.
-config RCU_CPU_STALL_DETECTOR
- bool "Check for stalled CPUs delaying RCU grace periods"
- depends on CLASSIC_RCU
- default n
- help
- This option causes RCU to printk information on which
- CPUs are delaying the current grace period, but only when
- the grace period extends for excessive time periods.
-
- Say Y if you want RCU to perform such checks.
-
- Say N if you are unsure.
-
config RCU_CPU_STALL_DETECTOR
bool "Check for stalled CPUs delaying RCU grace periods"
depends on CLASSIC_RCU || TREE_RCU
static void mem_cgroup_get(struct mem_cgroup *mem);
static void mem_cgroup_put(struct mem_cgroup *mem);
+static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
struct page_cgroup *pc,
/* This is for making all *used* pages to be on LRU. */
lru_add_drain_all();
ret = 0;
- for_each_node_state(node, N_POSSIBLE) {
+ for_each_node_state(node, N_HIGH_MEMORY) {
for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) {
enum lru_list l;
for_each_lru(l) {
static void mem_cgroup_put(struct mem_cgroup *mem)
{
- if (atomic_dec_and_test(&mem->refcnt))
+ if (atomic_dec_and_test(&mem->refcnt)) {
+ struct mem_cgroup *parent = parent_mem_cgroup(mem);
__mem_cgroup_free(mem);
+ if (parent)
+ mem_cgroup_put(parent);
+ }
}
+/*
+ * Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
+ */
+static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem)
+{
+ if (!mem->res.parent)
+ return NULL;
+ return mem_cgroup_from_res_counter(mem->res.parent, res);
+}
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
static void __init enable_swap_cgroup(void)
if (parent && parent->use_hierarchy) {
res_counter_init(&mem->res, &parent->res);
res_counter_init(&mem->memsw, &parent->memsw);
+ /*
+ * We increment refcnt of the parent to ensure that we can
+ * safely access it on res_counter_charge/uncharge.
+ * This refcnt will be decremented when freeing this
+ * mem_cgroup(see mem_cgroup_put).
+ */
+ mem_cgroup_get(parent);
} else {
res_counter_init(&mem->res, NULL);
res_counter_init(&mem->memsw, NULL);
}
/*
- * Can we just expand an old private anonymous mapping?
- * The VM_SHARED test is necessary because shmem_zero_setup
- * will create the file object for a shared anonymous map below.
+ * Can we just expand an old mapping?
*/
- if (!file && !(vm_flags & VM_SHARED)) {
- vma = vma_merge(mm, prev, addr, addr + len, vm_flags,
- NULL, NULL, pgoff, NULL);
- if (vma)
- goto out;
- }
+ vma = vma_merge(mm, prev, addr, addr + len, vm_flags, NULL, file, pgoff, NULL);
+ if (vma)
+ goto out;
/*
* Determine the object being mapped and call the appropriate
if (vma_wants_writenotify(vma))
vma->vm_page_prot = vm_get_page_prot(vm_flags & ~VM_SHARED);
- if (file && vma_merge(mm, prev, addr, vma->vm_end,
- vma->vm_flags, NULL, file, pgoff, vma_policy(vma))) {
- mpol_put(vma_policy(vma));
- kmem_cache_free(vm_area_cachep, vma);
- fput(file);
- if (vm_flags & VM_EXECUTABLE)
- removed_exe_file_vma(mm);
- } else {
- vma_link(mm, vma, prev, rb_link, rb_parent);
- file = vma->vm_file;
- }
+ vma_link(mm, vma, prev, rb_link, rb_parent);
+ file = vma->vm_file;
/* Once vma denies write, undo our temporary denial count */
if (correct_wcount)
* Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
* Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
* Copyright (c) 2002 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2007-2008 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
*/
#include <linux/module.h>
}
EXPORT_SYMBOL(vunmap);
+void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
+{
+ BUG();
+ return NULL;
+}
+EXPORT_SYMBOL(vm_map_ram);
+
+void vm_unmap_ram(const void *mem, unsigned int count)
+{
+ BUG();
+}
+EXPORT_SYMBOL(vm_unmap_ram);
+
+void vm_unmap_aliases(void)
+{
+}
+EXPORT_SYMBOL_GPL(vm_unmap_aliases);
+
/*
* Implement a stub for vmalloc_sync_all() if the architecture chose not to
* have one.
return ret;
enomem:
- printk("Allocation of length %lu from process %d failed\n",
- len, current->pid);
+ printk("Allocation of length %lu from process %d (%s) failed\n",
+ len, current->pid, current->comm);
show_free_areas();
return -ENOMEM;
}
pte_t *pte;
int ret = 1;
- if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr))
+ if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr)) {
ret = -ENOMEM;
+ goto out_nolock;
+ }
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
if (unlikely(!pte_same(*pte, swp_entry_to_pte(entry)))) {
activate_page(page);
out:
pte_unmap_unlock(pte, ptl);
+out_nolock:
return ret;
}
{
return vlan_dev_info(dev)->real_dev;
}
-EXPORT_SYMBOL_GPL(vlan_dev_real_dev);
+EXPORT_SYMBOL(vlan_dev_real_dev);
u16 vlan_dev_vlan_id(const struct net_device *dev)
{
return vlan_dev_info(dev)->vlan_id;
}
-EXPORT_SYMBOL_GPL(vlan_dev_vlan_id);
+EXPORT_SYMBOL(vlan_dev_vlan_id);
static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci, struct sk_buff *skb)
return ERR_PTR(-ENOMEM);
ret = p9_idpool_get(clnt->fidpool);
- if (fid->fid < 0) {
+ if (ret < 0) {
ret = -ENOSPC;
goto error;
}
menu "Networking options"
-config NET_NS
- bool "Network namespace support"
- default n
- depends on EXPERIMENTAL && NAMESPACES
- help
- Allow user space to create what appear to be multiple instances
- of the network stack.
-
config COMPAT_NET_DEV_OPS
def_bool y
skb->mac_len = skb->network_header - skb->mac_header;
__skb_pull(skb, skb->mac_len);
- if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) {
+ if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
+ struct net_device *dev = skb->dev;
+ struct ethtool_drvinfo info = {};
+
+ if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo)
+ dev->ethtool_ops->get_drvinfo(dev, &info);
+
+ WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d "
+ "ip_summed=%d",
+ info.driver, dev ? dev->features : 0L,
+ skb->sk ? skb->sk->sk_route_caps : 0L,
+ skb->len, skb->data_len, skb->ip_summed);
+
if (skb_header_cloned(skb) &&
(err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
return ERR_PTR(err);
if (!pskb_may_pull(skb, ETH_HLEN)) {
napi_reuse_skb(napi, skb);
+ skb = NULL;
goto out;
}
rv = register_pernet_operations(first_device, ops);
if (rv < 0)
ida_remove(&net_generic_ids, *id);
- mutex_unlock(&net_mutex);
out:
+ mutex_unlock(&net_mutex);
return rv;
}
EXPORT_SYMBOL_GPL(register_pernet_gen_subsys);
static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
- struct sk_buff *skb = (struct sk_buff *) buf->private;
-
- kfree_skb(skb);
+ put_page(buf->page);
}
static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
- struct sk_buff *skb = (struct sk_buff *) buf->private;
-
- skb_get(skb);
+ get_page(buf->page);
}
static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
*/
static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i)
{
- struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private;
+ put_page(spd->pages[i]);
+}
- kfree_skb(skb);
+static inline struct page *linear_to_page(struct page *page, unsigned int len,
+ unsigned int offset)
+{
+ struct page *p = alloc_pages(GFP_KERNEL, 0);
+
+ if (!p)
+ return NULL;
+ memcpy(page_address(p) + offset, page_address(page) + offset, len);
+
+ return p;
}
/*
*/
static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
unsigned int len, unsigned int offset,
- struct sk_buff *skb)
+ struct sk_buff *skb, int linear)
{
if (unlikely(spd->nr_pages == PIPE_BUFFERS))
return 1;
+ if (linear) {
+ page = linear_to_page(page, len, offset);
+ if (!page)
+ return 1;
+ } else
+ get_page(page);
+
spd->pages[spd->nr_pages] = page;
spd->partial[spd->nr_pages].len = len;
spd->partial[spd->nr_pages].offset = offset;
- spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb);
spd->nr_pages++;
+
return 0;
}
static inline int __splice_segment(struct page *page, unsigned int poff,
unsigned int plen, unsigned int *off,
unsigned int *len, struct sk_buff *skb,
- struct splice_pipe_desc *spd)
+ struct splice_pipe_desc *spd, int linear)
{
if (!*len)
return 1;
/* the linear region may spread across several pages */
flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
- if (spd_fill_page(spd, page, flen, poff, skb))
+ if (spd_fill_page(spd, page, flen, poff, skb, linear))
return 1;
__segment_seek(&page, &poff, &plen, flen);
if (__splice_segment(virt_to_page(skb->data),
(unsigned long) skb->data & (PAGE_SIZE - 1),
skb_headlen(skb),
- offset, len, skb, spd))
+ offset, len, skb, spd, 1))
return 1;
/*
const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
if (__splice_segment(f->page, f->page_offset, f->size,
- offset, len, skb, spd))
+ offset, len, skb, spd, 0))
return 1;
}
* the frag list, if such a thing exists. We'd probably need to recurse to
* handle that cleanly.
*/
-int skb_splice_bits(struct sk_buff *__skb, unsigned int offset,
+int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
struct pipe_inode_info *pipe, unsigned int tlen,
unsigned int flags)
{
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
};
- struct sk_buff *skb;
-
- /*
- * I'd love to avoid the clone here, but tcp_read_sock()
- * ignores reference counts and unconditonally kills the sk_buff
- * on return from the actor.
- */
- skb = skb_clone(__skb, GFP_KERNEL);
- if (unlikely(!skb))
- return -ENOMEM;
/*
* __skb_splice_bits() only fails if the output has no room left,
}
done:
- /*
- * drop our reference to the clone, the pipe consumption will
- * drop the rest.
- */
- kfree_skb(skb);
-
if (spd.nr_pages) {
+ struct sock *sk = skb->sk;
int ret;
- struct sock *sk = __skb->sk;
/*
* Drop the socket lock, otherwise we have reverse
struct sk_buff *nskb;
unsigned int headroom;
unsigned int hlen = p->data - skb_mac_header(p);
+ unsigned int len = skb->len;
- if (hlen + p->len + skb->len >= 65536)
+ if (hlen + p->len + len >= 65536)
return -E2BIG;
if (skb_shinfo(p)->frag_list)
done:
NAPI_GRO_CB(p)->count++;
- p->data_len += skb->len;
- p->truesize += skb->len;
- p->len += skb->len;
+ p->data_len += len;
+ p->truesize += len;
+ p->len += len;
NAPI_GRO_CB(skb)->same_flow = 1;
return 0;
unsigned int nlen;
int flush = 1;
int proto;
+ __wsum csum;
if (unlikely(!pskb_may_pull(skb, sizeof(*iph))))
goto out;
rcu_read_lock();
proto = ipv6_gso_pull_exthdrs(skb, iph->nexthdr);
+ iph = ipv6_hdr(skb);
IPV6_GRO_CB(skb)->proto = proto;
ops = rcu_dereference(inet6_protos[proto]);
if (!ops || !ops->gro_receive)
NAPI_GRO_CB(skb)->flush |= flush;
+ csum = skb->csum;
+ skb_postpull_rcsum(skb, iph, skb_network_header_len(skb));
+
pp = ops->gro_receive(head, skb);
+ skb->csum = csum;
+
out_unlock:
rcu_read_unlock();
ext_hdrs[SADB_X_EXT_NAT_T_DPORT-1];
natt->encap_dport = n_port->sadb_x_nat_t_port_port;
}
+ memset(&natt->encap_oa, 0, sizeof(natt->encap_oa));
}
err = xfrm_init_state(x);
if (use_short_slot != bss_conf->use_short_slot) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: switched to %s slot"
- " (BSSID=%s)\n",
+ printk(KERN_DEBUG "%s: switched to %s slot time"
+ " (BSSID=%pM)\n",
sdata->dev->name,
use_short_slot ? "short" : "long",
ifsta->bssid);
* @tx_packets: number of RX/TX MSDUs
* @tx_bytes: number of bytes transmitted to this STA
* @tx_fragments: number of transmitted MPDUs
- * @last_txrate: description of the last used transmit rate
* @tid_seq: per-TID sequence numbers for sending to this STA
* @ampdu_mlme: A-MPDU state machine state
* @timer_to_tid: identity mapping to ID timers
if (is_multicast_ether_addr(hdr->addr3))
memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
else
- if (mesh_nexthop_lookup(skb, osdata))
- return 0;
+ if (mesh_nexthop_lookup(skb, osdata)) {
+ dev_put(odev);
+ return 0;
+ }
if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
fwded_frames);
if (!parse_nat_setup) {
#ifdef CONFIG_MODULES
rcu_read_unlock();
+ spin_unlock_bh(&nf_conntrack_lock);
nfnl_unlock();
if (request_module("nf-nat-ipv4") < 0) {
nfnl_lock();
+ spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
return -EOPNOTSUPP;
}
nfnl_lock();
+ spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
if (nfnetlink_parse_nat_setup_hook)
return -EAGAIN;
*/
sctp_bh_lock_sock(sk);
+ if (sk != rcvr->sk) {
+ /* Our cached sk is different from the rcvr->sk. This is
+ * because migrate()/accept() may have moved the association
+ * to a new socket and released all the sockets. So now we
+ * are holding a lock on the old socket while the user may
+ * be doing something with the new socket. Switch our veiw
+ * of the current sk.
+ */
+ sctp_bh_unlock_sock(sk);
+ sk = rcvr->sk;
+ sctp_bh_lock_sock(sk);
+ }
+
if (sock_owned_by_user(sk)) {
SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
sctp_add_backlog(sk, skb);
switch (chunk->chunk_hdr->type) {
case SCTP_CID_DATA:
retval = sctp_packet_append_data(packet, chunk);
+ if (SCTP_XMIT_OK != retval)
+ goto finish;
/* Disallow SACK bundling after DATA. */
packet->has_sack = 1;
/* Disallow AUTH bundling after DATA */
packet->has_auth = 1;
/* Let it be knows that packet has DATA in it */
packet->has_data = 1;
- if (SCTP_XMIT_OK != retval)
- goto finish;
+ /* timestamp the chunk for rtx purposes */
+ chunk->sent_at = jiffies;
break;
case SCTP_CID_COOKIE_ECHO:
packet->has_cookie_echo = 1;
} else
chunk->resent = 1;
- chunk->sent_at = jiffies;
has_data = 1;
}
}
/* Finally, transmit new packets. */
- start_timer = 0;
while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
* stream identifier.
list_add_tail(&chunk->transmitted_list,
&transport->transmitted);
- sctp_transport_reset_timers(transport, start_timer-1);
+ sctp_transport_reset_timers(transport, 0);
q->empty = 0;
--- /dev/null
+config SUNRPC
+ tristate
+
+config SUNRPC_GSS
+ tristate
+
+config SUNRPC_XPRT_RDMA
+ tristate
+ depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+ default SUNRPC && INFINIBAND
+ help
+ This option allows the NFS client and server to support
+ an RDMA-enabled transport.
+
+ To compile RPC client RDMA transport support as a module,
+ choose M here: the module will be called xprtrdma.
+
+ If unsure, say N.
+
+config SUNRPC_REGISTER_V4
+ bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
+ depends on SUNRPC && EXPERIMENTAL
+ default n
+ help
+ Sun added support for registering RPC services at an IPv6
+ address by creating two new versions of the rpcbind protocol
+ (RFC 1833).
+
+ This option enables support in the kernel RPC server for
+ registering kernel RPC services via version 4 of the rpcbind
+ protocol. If you enable this option, you must run a portmapper
+ daemon that supports rpcbind protocol version 4.
+
+ Serving NFS over IPv6 from knfsd (the kernel's NFS server)
+ requires that you enable this option and use a portmapper that
+ supports rpcbind version 4.
+
+ If unsure, say N to get traditional behavior (register kernel
+ RPC services using only rpcbind version 2). Distributions
+ using the legacy Linux portmapper daemon must say N here.
+
+config RPCSEC_GSS_KRB5
+ tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
+ depends on SUNRPC && EXPERIMENTAL
+ select SUNRPC_GSS
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_DES
+ select CRYPTO_CBC
+ help
+ Choose Y here to enable Secure RPC using the Kerberos version 5
+ GSS-API mechanism (RFC 1964).
+
+ Secure RPC calls with Kerberos require an auxiliary user-space
+ daemon which may be found in the Linux nfs-utils package
+ available from http://linux-nfs.org/. In addition, user-space
+ Kerberos support should be installed.
+
+ If unsure, say N.
+
+config RPCSEC_GSS_SPKM3
+ tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
+ depends on SUNRPC && EXPERIMENTAL
+ select SUNRPC_GSS
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_DES
+ select CRYPTO_CAST5
+ select CRYPTO_CBC
+ help
+ Choose Y here to enable Secure RPC using the SPKM3 public key
+ GSS-API mechansim (RFC 2025).
+
+ Secure RPC calls with SPKM3 require an auxiliary userspace
+ daemon which may be found in the Linux nfs-utils package
+ available from http://linux-nfs.org/.
+
+ If unsure, say N.
return 0;
}
+/**
+ * freq_in_rule_band - tells us if a frequency is in a frequency band
+ * @freq_range: frequency rule we want to query
+ * @freq_khz: frequency we are inquiring about
+ *
+ * This lets us know if a specific frequency rule is or is not relevant to
+ * a specific frequency's band. Bands are device specific and artificial
+ * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is
+ * safe for now to assume that a frequency rule should not be part of a
+ * frequency's band if the start freq or end freq are off by more than 2 GHz.
+ * This resolution can be lowered and should be considered as we add
+ * regulatory rule support for other "bands".
+ **/
+static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
+ u32 freq_khz)
+{
+#define ONE_GHZ_IN_KHZ 1000000
+ if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
+ return true;
+ if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
+ return true;
+ return false;
+#undef ONE_GHZ_IN_KHZ
+}
+
/* Converts a country IE to a regulatory domain. A regulatory domain
* structure has a lot of information which the IE doesn't yet have,
* so for the other values we use upper max values as we will intersect
/* This time around we fill in the rd */
while (country_ie_len >= 3) {
+ int end_channel = 0;
struct ieee80211_country_ie_triplet *triplet =
(struct ieee80211_country_ie_triplet *) country_ie;
struct ieee80211_reg_rule *reg_rule = NULL;
reg_rule->flags = flags;
+ /* 2 GHz */
+ if (triplet->chans.first_channel <= 14)
+ end_channel = triplet->chans.first_channel +
+ triplet->chans.num_channels;
+ else
+ /*
+ * 5 GHz -- For example in country IEs if the first
+ * channel given is 36 and the number of channels is 4
+ * then the individual channel numbers defined for the
+ * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+ * and not 36, 37, 38, 39.
+ *
+ * See: http://tinyurl.com/11d-clarification
+ */
+ end_channel = triplet->chans.first_channel +
+ (4 * (triplet->chans.num_channels - 1));
+
/* The +10 is since the regulatory domain expects
* the actual band edge, not the center of freq for
* its start and end freqs, assuming 20 MHz bandwidth on
triplet->chans.first_channel) - 10);
freq_range->end_freq_khz =
MHZ_TO_KHZ(ieee80211_channel_to_frequency(
- triplet->chans.first_channel +
- triplet->chans.num_channels) + 10);
+ end_channel) + 10);
/* Large arbitrary values, we intersect later */
/* Increment this if we ever support >= 40 MHz channels
* this value to the maximum allowed bandwidth.
* @reg_rule: the regulatory rule which we have for this frequency
*
- * Use this function to get the regulatory rule for a specific frequency.
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
*/
static int freq_reg_info(u32 center_freq, u32 *bandwidth,
const struct ieee80211_reg_rule **reg_rule)
{
int i;
+ bool band_rule_found = false;
u32 max_bandwidth = 0;
if (!cfg80211_regdomain)
rr = &cfg80211_regdomain->reg_rules[i];
fr = &rr->freq_range;
pr = &rr->power_rule;
+
+ /* We only need to know if one frequency rule was
+ * was in center_freq's band, that's enough, so lets
+ * not overwrite it once found */
+ if (!band_rule_found)
+ band_rule_found = freq_in_rule_band(fr, center_freq);
+
max_bandwidth = freq_max_bandwidth(fr, center_freq);
+
if (max_bandwidth && *bandwidth <= max_bandwidth) {
*reg_rule = rr;
*bandwidth = max_bandwidth;
}
}
+ if (!band_rule_found)
+ return -ERANGE;
+
return !max_bandwidth;
}
-static void handle_channel(struct ieee80211_channel *chan)
+static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
+ unsigned int chan_idx)
{
int r;
- u32 flags = chan->orig_flags;
+ u32 flags;
u32 max_bandwidth = 0;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *chan;
+
+ sband = wiphy->bands[band];
+ BUG_ON(chan_idx >= sband->n_channels);
+ chan = &sband->channels[chan_idx];
+
+ flags = chan->orig_flags;
r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq),
&max_bandwidth, ®_rule);
if (r) {
- flags |= IEEE80211_CHAN_DISABLED;
- chan->flags = flags;
+ /* This means no regulatory rule was found in the country IE
+ * with a frequency range on the center_freq's band, since
+ * IEEE-802.11 allows for a country IE to have a subset of the
+ * regulatory information provided in a country we ignore
+ * disabling the channel unless at least one reg rule was
+ * found on the center_freq's band. For details see this
+ * clarification:
+ *
+ * http://tinyurl.com/11d-clarification
+ */
+ if (r == -ERANGE &&
+ last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
+#ifdef CONFIG_CFG80211_REG_DEBUG
+ printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
+ "intact on %s - no rule found in band on "
+ "Country IE\n",
+ chan->center_freq, wiphy_name(wiphy));
+#endif
+ } else {
+ /* In this case we know the country IE has at least one reg rule
+ * for the band so we respect its band definitions */
+#ifdef CONFIG_CFG80211_REG_DEBUG
+ if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
+ printk(KERN_DEBUG "cfg80211: Disabling "
+ "channel %d MHz on %s due to "
+ "Country IE\n",
+ chan->center_freq, wiphy_name(wiphy));
+#endif
+ flags |= IEEE80211_CHAN_DISABLED;
+ chan->flags = flags;
+ }
return;
}
chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
}
-static void handle_band(struct ieee80211_supported_band *sband)
+static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
{
- int i;
+ unsigned int i;
+ struct ieee80211_supported_band *sband;
+
+ BUG_ON(!wiphy->bands[band]);
+ sband = wiphy->bands[band];
for (i = 0; i < sband->n_channels; i++)
- handle_channel(&sband->channels[i]);
+ handle_channel(wiphy, band, i);
}
static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby)
enum ieee80211_band band;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (wiphy->bands[band])
- handle_band(wiphy->bands[band]);
+ handle_band(wiphy, band);
if (wiphy->reg_notifier)
wiphy->reg_notifier(wiphy, setby);
}
}
#endif
-/* For the xfrm_usersa_info cases we have to work around some 32-bit vs.
- * 64-bit compatability issues. On 32-bit the structure is 220 bytes, but
- * for 64-bit it gets padded out to 224 bytes. Those bytes are just
- * padding and don't have any content we care about. Therefore as long
- * as we have enough bytes for the content we can make both cases work.
- */
-
#define XMSGSIZE(type) sizeof(struct type)
static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
- [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = 220, /* see above */
+ [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
[XFRM_MSG_DELSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
[XFRM_MSG_GETSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
[XFRM_MSG_NEWPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
[XFRM_MSG_ACQUIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire),
[XFRM_MSG_EXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire),
[XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
- [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = 220, /* see above */
+ [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
[XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire),
[XFRM_MSG_FLUSHSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush),
[XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0,
$(obj)/%.i: $(src)/%.c FORCE
$(call if_changed_dep,cc_i_c)
-cmd_genksyms = \
+cmd_gensymtypes = \
$(CPP) -D__GENKSYMS__ $(c_flags) $< | \
- $(GENKSYMS) -T $@ -A -a $(ARCH) \
+ $(GENKSYMS) -T $@ -a $(ARCH) \
$(if $(KBUILD_PRESERVE),-p) \
$(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
cmd_cc_symtypes_c = \
set -e; \
- $(call cmd_genksyms, true) >/dev/null; \
+ $(call cmd_gensymtypes, true) >/dev/null; \
test -s $@ || rm -f $@
$(obj)/%.symtypes : $(src)/%.c FORCE
else
# When module versioning is enabled the following steps are executed:
-# o compile a .tmp_<file>.s from <file>.c
-# o if .tmp_<file>.s doesn't contain a __ksymtab version, i.e. does
-# not export symbols, we just assemble .tmp_<file>.s to <file>.o and
+# o compile a .tmp_<file>.o from <file>.c
+# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
+# not export symbols, we just rename .tmp_<file>.o to <file>.o and
# are done.
# o otherwise, we calculate symbol versions using the good old
# genksyms on the preprocessed source and postprocess them in a way
-# that they are usable as assembly source
-# o assemble <file>.o from .tmp_<file>.s forcing inclusion of directives
-# defining the actual values of __crc_*, followed by objcopy-ing them
-# to force these symbols to be local to permit stripping them later.
-s_file = $(@D)/.tmp_$(@F:.o=.s)
-v_file = $(@D)/.tmp_$(@F:.o=.v)
-tmp_o_file = $(@D)/.tmp_$(@F)
-no_g_c_flags = $(filter-out -g%,$(c_flags))
-
-cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $<
+# that they are usable as a linker script
+# o generate <file>.o from .tmp_<file>.o using the linker to
+# replace the unresolved symbols __crc_exported_symbol with
+# the actual value of the checksum generated by genksyms
+cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
cmd_modversions = \
- if grep -q __ksymtab $(s_file); then \
- if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \
- && $(CC) $(no_g_c_flags) -c -Wa,$(v_file) \
- -o $(tmp_o_file) $(s_file) \
- && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w \
- $(tmp_o_file) $@; \
- then \
- : ; \
- else \
- rm -f $@; exit 1; \
- fi; \
+ if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
+ $(call cmd_gensymtypes, $(KBUILD_SYMTYPES)) \
+ > $(@D)/.tmp_$(@F:.o=.ver); \
+ \
+ $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
+ -T $(@D)/.tmp_$(@F:.o=.ver); \
+ rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
else \
- rm -f $(v_file); \
- $(CC) $(no_g_c_flags) -c -o $@ $(s_file); \
+ mv -f $(@D)/.tmp_$(@F) $@; \
fi;
endif
$(cmd_record_mcount) \
scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
$(dot-target).tmp; \
- if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then \
- echo >> $(dot-target).tmp; \
- echo '$@: $(GENKSYMS)' >> $(dot-target).tmp; \
- echo '$(GENKSYMS):: ;' >> $(dot-target).tmp; \
- fi; \
- rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?); \
+ rm -f $(depfile); \
mv -f $(dot-target).tmp $(dot-target).cmd
endef
@:
quiet_cmd_modules_install = INSTALL $@
- cmd_modules_install = mkdir -p $(2); \
- $(mod_strip_cmd) $@ $(2)/$(notdir $@) || cp $@ $(2)
+ cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@)
# Modules built outside the kernel source tree go into extra by default
INSTALL_MOD_DIR ?= extra
FN=.config
fi
+if [ "$1" = "" ] ; then
+ usage
+fi
+
while [ "$1" != "" ] ; do
CMD="$1"
shift
char *cur_filename;
static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types,
- flag_preserve, flag_warnings, flag_asm;
+ flag_preserve, flag_warnings;
static const char *arch = "";
static const char *mod_prefix = "";
if (flag_dump_defs)
fputs(">\n", debugfile);
- /* Used as assembly source or a linker script. */
- printf(flag_asm
- ? ".equiv %s__crc_%s, %#08lx\n"
- : "%s__crc_%s = %#08lx ;\n",
- mod_prefix, name, crc);
+ /* Used as a linker script. */
+ printf("%s__crc_%s = 0x%08lx ;\n", mod_prefix, name, crc);
}
}
static void genksyms_usage(void)
{
- fputs("Usage:\n" "genksyms [-aAdDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
+ fputs("Usage:\n" "genksyms [-adDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
#ifdef __GNU_LIBRARY__
" -a, --arch Select architecture\n"
- " -A, --asm Generate assembly rather than linker script\n"
" -d, --debug Increment the debug level (repeatable)\n"
" -D, --dump Dump expanded symbol defs (for debugging only)\n"
" -r, --reference file Read reference symbols from a file\n"
" -V, --version Print the release version\n"
#else /* __GNU_LIBRARY__ */
" -a Select architecture\n"
- " -A Generate assembly rather than linker script\n"
" -d Increment the debug level (repeatable)\n"
" -D Dump expanded symbol defs (for debugging only)\n"
" -r file Read reference symbols from a file\n"
#ifdef __GNU_LIBRARY__
struct option long_opts[] = {
{"arch", 1, 0, 'a'},
- {"asm", 0, 0, 'A'},
{"debug", 0, 0, 'd'},
{"warnings", 0, 0, 'w'},
{"quiet", 0, 0, 'q'},
{0, 0, 0, 0}
};
- while ((o = getopt_long(argc, argv, "a:dwqVADr:T:ph",
+ while ((o = getopt_long(argc, argv, "a:dwqVDr:T:ph",
&long_opts[0], NULL)) != EOF)
#else /* __GNU_LIBRARY__ */
- while ((o = getopt(argc, argv, "a:dwqVADr:T:ph")) != EOF)
+ while ((o = getopt(argc, argv, "a:dwqVDr:T:ph")) != EOF)
#endif /* __GNU_LIBRARY__ */
switch (o) {
case 'a':
case 'V':
fputs("genksyms version 2.5.60\n", stderr);
break;
- case 'A':
- flag_asm = 1;
- break;
case 'D':
flag_dump_defs = 1;
break;
-/* ANSI-C code produced by gperf version 3.0.1 */
+/* ANSI-C code produced by gperf version 3.0.2 */
/* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */
#if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
#line 3 "scripts/genksyms/keywords.gperf"
struct resword { const char *name; int token; };
-/* maximum key range = 64, duplicates = 0 */
+/* maximum key range = 62, duplicates = 0 */
#ifdef __GNUC__
__inline
{
static const unsigned char asso_values[] =
{
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 0,
- 67, 67, 67, 67, 67, 67, 15, 67, 67, 67,
- 0, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 0, 67, 0, 67, 5,
- 25, 20, 15, 30, 67, 15, 67, 67, 10, 0,
- 10, 40, 20, 67, 10, 5, 0, 10, 15, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
- 67, 67, 67, 67, 67, 67
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 5,
+ 65, 65, 65, 65, 65, 65, 35, 65, 65, 65,
+ 0, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 0, 65, 0, 65, 5,
+ 20, 15, 10, 30, 65, 15, 65, 65, 20, 0,
+ 10, 35, 20, 65, 10, 5, 0, 10, 5, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+ 65, 65, 65, 65, 65, 65
};
return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]];
}
{
enum
{
- TOTAL_KEYWORDS = 45,
+ TOTAL_KEYWORDS = 43,
MIN_WORD_LENGTH = 3,
MAX_WORD_LENGTH = 24,
MIN_HASH_VALUE = 3,
- MAX_HASH_VALUE = 66
+ MAX_HASH_VALUE = 64
};
static const struct resword wordlist[] =
{
{""}, {""}, {""},
-#line 28 "scripts/genksyms/keywords.gperf"
+#line 26 "scripts/genksyms/keywords.gperf"
{"asm", ASM_KEYW},
{""},
-#line 10 "scripts/genksyms/keywords.gperf"
+#line 8 "scripts/genksyms/keywords.gperf"
{"__asm", ASM_KEYW},
{""},
-#line 11 "scripts/genksyms/keywords.gperf"
+#line 9 "scripts/genksyms/keywords.gperf"
{"__asm__", ASM_KEYW},
{""}, {""},
-#line 54 "scripts/genksyms/keywords.gperf"
+#line 52 "scripts/genksyms/keywords.gperf"
{"__typeof__", TYPEOF_KEYW},
{""},
-#line 14 "scripts/genksyms/keywords.gperf"
+#line 12 "scripts/genksyms/keywords.gperf"
{"__const", CONST_KEYW},
-#line 13 "scripts/genksyms/keywords.gperf"
+#line 11 "scripts/genksyms/keywords.gperf"
{"__attribute__", ATTRIBUTE_KEYW},
-#line 15 "scripts/genksyms/keywords.gperf"
+#line 13 "scripts/genksyms/keywords.gperf"
{"__const__", CONST_KEYW},
-#line 20 "scripts/genksyms/keywords.gperf"
+#line 18 "scripts/genksyms/keywords.gperf"
{"__signed__", SIGNED_KEYW},
-#line 46 "scripts/genksyms/keywords.gperf"
+#line 44 "scripts/genksyms/keywords.gperf"
{"static", STATIC_KEYW},
- {""},
-#line 41 "scripts/genksyms/keywords.gperf"
+#line 20 "scripts/genksyms/keywords.gperf"
+ {"__volatile__", VOLATILE_KEYW},
+#line 39 "scripts/genksyms/keywords.gperf"
{"int", INT_KEYW},
-#line 34 "scripts/genksyms/keywords.gperf"
+#line 32 "scripts/genksyms/keywords.gperf"
{"char", CHAR_KEYW},
-#line 35 "scripts/genksyms/keywords.gperf"
+#line 33 "scripts/genksyms/keywords.gperf"
{"const", CONST_KEYW},
-#line 47 "scripts/genksyms/keywords.gperf"
+#line 45 "scripts/genksyms/keywords.gperf"
{"struct", STRUCT_KEYW},
-#line 26 "scripts/genksyms/keywords.gperf"
+#line 24 "scripts/genksyms/keywords.gperf"
{"__restrict__", RESTRICT_KEYW},
-#line 27 "scripts/genksyms/keywords.gperf"
- {"restrict", RESTRICT_KEYW},
-#line 7 "scripts/genksyms/keywords.gperf"
- {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
-#line 18 "scripts/genksyms/keywords.gperf"
- {"__inline__", INLINE_KEYW},
- {""},
-#line 22 "scripts/genksyms/keywords.gperf"
- {"__volatile__", VOLATILE_KEYW},
-#line 5 "scripts/genksyms/keywords.gperf"
- {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
#line 25 "scripts/genksyms/keywords.gperf"
+ {"restrict", RESTRICT_KEYW},
+#line 23 "scripts/genksyms/keywords.gperf"
{"_restrict", RESTRICT_KEYW},
- {""},
-#line 12 "scripts/genksyms/keywords.gperf"
- {"__attribute", ATTRIBUTE_KEYW},
-#line 6 "scripts/genksyms/keywords.gperf"
- {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
#line 16 "scripts/genksyms/keywords.gperf"
+ {"__inline__", INLINE_KEYW},
+#line 10 "scripts/genksyms/keywords.gperf"
+ {"__attribute", ATTRIBUTE_KEYW},
+ {""},
+#line 14 "scripts/genksyms/keywords.gperf"
{"__extension__", EXTENSION_KEYW},
-#line 37 "scripts/genksyms/keywords.gperf"
+#line 35 "scripts/genksyms/keywords.gperf"
{"enum", ENUM_KEYW},
-#line 8 "scripts/genksyms/keywords.gperf"
- {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW},
-#line 38 "scripts/genksyms/keywords.gperf"
+#line 19 "scripts/genksyms/keywords.gperf"
+ {"__volatile", VOLATILE_KEYW},
+#line 36 "scripts/genksyms/keywords.gperf"
{"extern", EXTERN_KEYW},
{""},
-#line 19 "scripts/genksyms/keywords.gperf"
+#line 17 "scripts/genksyms/keywords.gperf"
{"__signed", SIGNED_KEYW},
-#line 9 "scripts/genksyms/keywords.gperf"
- {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
-#line 49 "scripts/genksyms/keywords.gperf"
- {"union", UNION_KEYW},
-#line 53 "scripts/genksyms/keywords.gperf"
+#line 7 "scripts/genksyms/keywords.gperf"
+ {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
+ {""},
+#line 51 "scripts/genksyms/keywords.gperf"
{"typeof", TYPEOF_KEYW},
-#line 48 "scripts/genksyms/keywords.gperf"
+#line 46 "scripts/genksyms/keywords.gperf"
{"typedef", TYPEDEF_KEYW},
-#line 17 "scripts/genksyms/keywords.gperf"
+#line 15 "scripts/genksyms/keywords.gperf"
{"__inline", INLINE_KEYW},
-#line 33 "scripts/genksyms/keywords.gperf"
+#line 31 "scripts/genksyms/keywords.gperf"
{"auto", AUTO_KEYW},
-#line 21 "scripts/genksyms/keywords.gperf"
- {"__volatile", VOLATILE_KEYW},
+#line 47 "scripts/genksyms/keywords.gperf"
+ {"union", UNION_KEYW},
{""}, {""},
-#line 50 "scripts/genksyms/keywords.gperf"
+#line 48 "scripts/genksyms/keywords.gperf"
{"unsigned", UNSIGNED_KEYW},
- {""},
-#line 44 "scripts/genksyms/keywords.gperf"
+#line 49 "scripts/genksyms/keywords.gperf"
+ {"void", VOID_KEYW},
+#line 42 "scripts/genksyms/keywords.gperf"
{"short", SHORT_KEYW},
-#line 40 "scripts/genksyms/keywords.gperf"
+ {""}, {""},
+#line 50 "scripts/genksyms/keywords.gperf"
+ {"volatile", VOLATILE_KEYW},
+ {""},
+#line 37 "scripts/genksyms/keywords.gperf"
+ {"float", FLOAT_KEYW},
+#line 34 "scripts/genksyms/keywords.gperf"
+ {"double", DOUBLE_KEYW},
+ {""},
+#line 5 "scripts/genksyms/keywords.gperf"
+ {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
+ {""}, {""},
+#line 38 "scripts/genksyms/keywords.gperf"
{"inline", INLINE_KEYW},
+#line 6 "scripts/genksyms/keywords.gperf"
+ {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
+#line 41 "scripts/genksyms/keywords.gperf"
+ {"register", REGISTER_KEYW},
{""},
-#line 52 "scripts/genksyms/keywords.gperf"
- {"volatile", VOLATILE_KEYW},
-#line 42 "scripts/genksyms/keywords.gperf"
- {"long", LONG_KEYW},
-#line 24 "scripts/genksyms/keywords.gperf"
+#line 22 "scripts/genksyms/keywords.gperf"
{"_Bool", BOOL_KEYW},
- {""}, {""},
#line 43 "scripts/genksyms/keywords.gperf"
- {"register", REGISTER_KEYW},
-#line 51 "scripts/genksyms/keywords.gperf"
- {"void", VOID_KEYW},
-#line 39 "scripts/genksyms/keywords.gperf"
- {"float", FLOAT_KEYW},
-#line 36 "scripts/genksyms/keywords.gperf"
- {"double", DOUBLE_KEYW},
- {""}, {""}, {""}, {""},
-#line 45 "scripts/genksyms/keywords.gperf"
- {"signed", SIGNED_KEYW}
+ {"signed", SIGNED_KEYW},
+ {""}, {""},
+#line 40 "scripts/genksyms/keywords.gperf"
+ {"long", LONG_KEYW}
};
if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW
EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
__asm, ASM_KEYW
__asm__, ASM_KEYW
__attribute, ATTRIBUTE_KEYW
static int symbol_valid(struct sym_entry *s)
{
/* Symbols which vary between passes. Passes 1 and 2 must have
- * identical symbol lists.
+ * identical symbol lists. The kallsyms_* symbols below are only added
+ * after pass 1, they would be included in pass 2 when --all-symbols is
+ * specified so exclude them to get a stable symbol list.
*/
static char *special_symbols[] = {
+ "kallsyms_addresses",
+ "kallsyms_num_syms",
+ "kallsyms_names",
+ "kallsyms_markers",
+ "kallsyms_token_table",
+ "kallsyms_token_index",
+
/* Exclude linker generated symbols which vary between passes */
"_SDA_BASE_", /* ppc */
"_SDA2_BASE_", /* ppc */
}
/* Exclude symbols which vary between passes. */
- if (strstr((char *)s->sym + offset, "_compiled.") ||
- strncmp((char*)s->sym + offset, "__compound_literal.", 19) == 0 ||
- strncmp((char*)s->sym + offset, "__compound_literal$", 19) == 0)
+ if (strstr((char *)s->sym + offset, "_compiled."))
return 0;
for (i = 0; special_symbols[i]; i++)
usage();
read_map(stdin);
- if (table_cnt) {
- sort_symbols();
- optimize_token_table();
- }
+ sort_symbols();
+ optimize_token_table();
write_src();
return 0;
# readprofile starts reading symbols when _stext is found, and
# continue until it finds a symbol which is not either of 'T', 't',
-# 'W' or 'w'.
+# 'W' or 'w'. __crc_ are 'A' and placed in the middle
+# so we just ignore them to let readprofile continue to work.
+# (At least sparc64 has __crc_ in the middle).
+
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
-$NM -n $1 | grep -v '\( [aNUw] \)\|\( \$[adt]\)' > $2
for (i = 0; i < count; i++) {
const char *id = (char *)devs[i].id;
+ char acpi_id[sizeof(devs[0].id)];
+ int j;
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+ /* fix broken pnp bus lowercasing */
+ for (j = 0; j < sizeof(acpi_id); j++)
+ acpi_id[j] = toupper(id[j]);
buf_printf(&mod->dev_table_buf,
- "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+ "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
}
}
/* add an individual alias for every device entry */
if (!dup) {
+ char acpi_id[sizeof(card->devs[0].id)];
+ int k;
+
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+ /* fix broken pnp bus lowercasing */
+ for (k = 0; k < sizeof(acpi_id); k++)
+ acpi_id[k] = toupper(id[k]);
buf_printf(&mod->dev_table_buf,
- "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+ "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
}
}
}
+++ /dev/null
-<*>
-*.h
-__compound_literal[$.][0-9]*
-__crc_[a-zA-Z_]*
-__exitcall_[a-zA-Z_]*
-__func__[$.][0-9]*
-__FUNCTION__[$.][0-9]*
-gcc[0-9]_compiled[$.]
-__initcall_[a-zA-Z_]*
-__kcrctab_[a-zA-Z_]*
-__kstrtab_[a-zA-Z_]*
-__ksymtab_[a-zA-Z_]*
-__mod_[a-zA-Z_]*[0-9]
-__module_depends
-__param_[a-zA-Z_]*
-__pci_fixup_*PCI_ANY_IDPCI_ANY_ID*
-__pci_fixup_*PCI_ANY_IDPCI_DEVICE_ID_*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_ANY_ID*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_DEVICE_ID_*
-__PRETTY_FUNCTION__[$.][0-9]*
-__setup_[a-zA-Z_]*
-____versions
/* join the session */
ret = join_session_keyring(name);
+ kfree(name);
error:
return ret;
break;
case 'a':
case 'A':
- rule.smk_access |= MAY_READ;
+ rule.smk_access |= MAY_APPEND;
break;
default:
goto out;
select SND_OXYGEN_LIB
help
Say Y here to include support for sound cards based on the
- Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
- HDAV1.3 (Deluxe).
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
+ Support for the HDAV1.3 (Deluxe) is very experimental.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL),
SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
{}
enum {
STAC_92HD83XXX_REF,
+ STAC_92HD83XXX_PWR_REF,
STAC_92HD83XXX_MODELS
};
};
static unsigned int stac92hd83xxx_pwr_mapping[4] = {
- 0x03, 0x0c, 0x10, 0x40,
+ 0x03, 0x0c, 0x20, 0x40,
};
static hda_nid_t stac92hd83xxx_amp_nids[1] = {
};
static struct hda_verb stac92hd83xxx_core_init[] = {
- /* start of config #1 */
- { 0xe, AC_VERB_SET_CONNECT_SEL, 0x3},
-
- /* start of config #2 */
{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x0},
{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x0},
{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x1},
static struct hda_verb stac925x_core_init[] = {
/* set dac0mux for dac converter */
{ 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* unmute and set max the selector */
- { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb01f },
+ /* mute the master volume */
+ { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
{}
};
};
static struct snd_kcontrol_new stac925x_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
+ [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
};
static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
[STAC_92HD83XXX_REF] = "ref",
+ [STAC_92HD83XXX_PWR_REF] = "mic-ref",
};
static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
"HP dv5", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
"HP dv7", STAC_HP_M4),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7,
+ "HP dv4", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
"HP dv7", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
err = stac92xx_auto_fill_dac_nids(codec);
if (err < 0)
return err;
+ err = stac92xx_auto_create_multi_out_ctls(codec,
+ &spec->autocfg);
+ if (err < 0)
+ return err;
}
- err = stac92xx_auto_create_multi_out_ctls(codec, &spec->autocfg);
-
- if (err < 0)
- return err;
-
/* setup analog beep controls */
if (spec->anabeep_nid > 0) {
err = stac92xx_auto_create_beep_ctls(codec,
static int patch_stac92hd83xxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
+ hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
int err;
+ int num_dacs;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = spec->dac_nids;
- spec->init = stac92hd83xxx_core_init;
- switch (codec->vendor_id) {
- case 0x111d7605:
- break;
- default:
- spec->num_pwrs--;
- spec->init++; /* switch to config #2 */
- }
+ /* set port 0xe to select the last DAC
+ */
+ num_dacs = snd_hda_get_connections(codec, 0x0e,
+ conn, STAC92HD83_DAC_COUNT + 1) - 1;
+
+ snd_hda_codec_write_cache(codec, 0xe, 0,
+ AC_VERB_SET_CONNECT_SEL, num_dacs);
+
+ spec->init = stac92hd83xxx_core_init;
spec->mixer = stac92hd83xxx_mixer;
spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
return err;
}
+ switch (codec->vendor_id) {
+ case 0x111d7604:
+ case 0x111d7605:
+ if (spec->board_config == STAC_92HD83XXX_PWR_REF)
+ break;
+ spec->num_pwrs = 0;
+ break;
+ }
+
err = stac92xx_parse_auto_config(codec, 0x1d, 0);
if (!err) {
if (spec->board_config < 0) {
if (chip->uart_input_count >= 2 &&
chip->uart_input[chip->uart_input_count - 2] == 'O' &&
chip->uart_input[chip->uart_input_count - 1] == 'K') {
- printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:");
+ printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n");
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
chip->uart_input, chip->uart_input_count);
chip->uart_input_count = 0;
.dac_channels = 8,
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
+ .misc_flags = OXYGEN_MISC_MIDI,
.function_flags = OXYGEN_FUNCTION_2WIRE,
.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/hardware.h>
-
#include "atmel-pcm.h"
.startup = mpc8610_hpcd_startup,
};
-/**
- * mpc8610_hpcd_machine: ASoC machine data
- */
-static struct snd_soc_card mpc8610_hpcd_machine = {
- .probe = mpc8610_hpcd_machine_probe,
- .remove = mpc8610_hpcd_machine_remove,
- .name = "MPC8610 HPCD",
- .num_links = 1,
-};
-
/**
* mpc8610_hpcd_probe: OF probe function for the fabric driver
*
machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */
machine_data->dai.ops = &mpc8610_hpcd_ops;
- mpc8610_hpcd_machine.dai_link = &machine_data->dai;
+ machine_data->machine.probe = mpc8610_hpcd_machine_probe;
+ machine_data->machine.remove = mpc8610_hpcd_machine_remove;
+ machine_data->machine.name = "MPC8610 HPCD";
+ machine_data->machine.num_links = 1;
+ machine_data->machine.dai_link = &machine_data->dai;
/* Allocate a new audio platform device structure */
sound_device = platform_device_alloc("soc-audio", -1);
goto error;
}
- machine_data->sound_devdata.card = &mpc8610_hpcd_machine;
+ machine_data->sound_devdata.card = &machine_data->machine;
machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270;
machine_data->machine.platform = &fsl_soc_platform;
projects / linux-2.6-block.git / commitdiff