* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (48 commits)
ieee1394: raw1394: arm functions slept in atomic context
ieee1394: sbp2: enable auto spin-up for all SBP-2 devices
MAINTAINERS: updates to IEEE 1394 subsystem maintainership
ieee1394: ohci1394: check for errors in suspend or resume
set power state of firewire host during suspend
ieee1394: ohci1394: more obvious endianess handling
ieee1394: ohci1394: fix endianess bug in debug message
ieee1394: sbp2: don't prefer MODE SENSE 10
ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_ne
ieee1394: nodemgr: fix rwsem recursion
ieee1394: sbp2: more help in Kconfig
ieee1394: sbp2: prevent rare deadlock in shutdown
ieee1394: sbp2: update includes
ieee1394: sbp2: better handling of transport errors
ieee1394: sbp2: recheck node generation in sbp2_update
ieee1394: sbp2: safer agent reset in error handlers
ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed"
CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c
ieee1394: safer definition of empty macros
video1394: add poll file operation support
...
---------------------------
-What: sbp2: module parameter "force_inquiry_hack"
-When: July 2006
-Why: Superceded by parameter "workarounds". Both parameters are meant to be
- used ad-hoc and for single devices only, i.e. not in modprobe.conf,
- therefore the impact of this feature replacement should be low.
-Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
-
----------------------------
-
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: July 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
L: linux-kernel@vger.kernel.org
S: Maintained
-IEEE 1394 ETHERNET (eth1394)
-L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
-S: Orphan
-
IEEE 1394 SUBSYSTEM
P: Ben Collins
M: bcollins@debian.org
-P: Jody McIntyre
-M: scjody@modernduck.com
+P: Stefan Richter
+M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
+T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
-IEEE 1394 OHCI DRIVER
-P: Ben Collins
-M: bcollins@debian.org
-P: Jody McIntyre
-M: scjody@modernduck.com
+IEEE 1394 IPV4 DRIVER (eth1394)
+P: Stefan Richter
+M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
-S: Maintained
+S: Odd Fixes
IEEE 1394 PCILYNX DRIVER
P: Jody McIntyre
M: scjody@modernduck.com
+P: Stefan Richter
+M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
-S: Maintained
+S: Odd Fixes
IEEE 1394 RAW I/O DRIVER
P: Ben Collins
P: Dan Dennedy
M: dan@dennedy.org
L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
-S: Maintained
-
-IEEE 1394 SBP2
-P: Ben Collins
-M: bcollins@debian.org
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
-L: linux1394-devel@lists.sourceforge.net
-W: http://www.linux1394.org/
S: Maintained
IMS TWINTURBO FRAMEBUFFER DRIVER
this option only if you have an IEEE 1394 video device connected to
an OHCI-1394 card.
+comment "SBP-2 support (for storage devices) requires SCSI"
+ depends on IEEE1394 && SCSI=n
+
config IEEE1394_SBP2
tristate "SBP-2 support (Harddisks etc.)"
depends on IEEE1394 && SCSI && (PCI || BROKEN)
help
- This option enables you to use SBP-2 devices connected to your IEEE
- 1394 bus. SBP-2 devices include harddrives and DVD devices.
+ This option enables you to use SBP-2 devices connected to an IEEE
+ 1394 bus. SBP-2 devices include storage devices like harddisks and
+ DVD drives, also some other FireWire devices like scanners.
+
+ You should also enable support for disks, CD-ROMs, etc. in the SCSI
+ configuration section.
config IEEE1394_SBP2_PHYS_DMA
bool "Enable replacement for physical DMA in SBP2"
*
*/
-#include <linux/string.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/param.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
#include "csr1212.h"
#include "ieee1394_types.h"
/*
* HI == seconds (bits 0:2)
- * LO == fraction units of 1/8000 of a second, as per 1394 (bits 19:31)
- *
- * Convert to units and then to HZ, for comparison to jiffies.
- *
- * By default this will end up being 800 units, or 100ms (125usec per
- * unit).
+ * LO == fractions of a second in units of 125usec (bits 19:31)
*
- * NOTE: The spec says 1/8000, but also says we can compute based on 1/8192
- * like CSR specifies. Should make our math less complex.
+ * Convert SPLIT_TIMEOUT to jiffies.
+ * The default and minimum as per 1394a-2000 clause 8.3.2.2.6 is 100ms.
*/
static inline void calculate_expire(struct csr_control *csr)
{
- unsigned long units;
-
- /* Take the seconds, and convert to units */
- units = (unsigned long)(csr->split_timeout_hi & 0x07) << 13;
-
- /* Add in the fractional units */
- units += (unsigned long)(csr->split_timeout_lo >> 19);
-
- /* Convert to jiffies */
- csr->expire = (unsigned long)(units * HZ) >> 13UL;
+ unsigned long usecs =
+ (csr->split_timeout_hi & 0x07) * USEC_PER_SEC +
+ (csr->split_timeout_lo >> 19) * 125L;
- /* Just to keep from rounding low */
- csr->expire++;
+ csr->expire = usecs_to_jiffies(usecs > 100000L ? usecs : 100000L);
HPSB_VERBOSE("CSR: setting expire to %lu, HZ=%u", csr->expire, HZ);
}
-
#ifndef _IEEE1394_CSR_H
#define _IEEE1394_CSR_H
-#ifdef CONFIG_PREEMPT
-#include <linux/sched.h>
-#endif
+#include <linux/spinlock_types.h>
#include "csr1212.h"
+#include "ieee1394_types.h"
-#define CSR_REGISTER_BASE 0xfffff0000000ULL
+#define CSR_REGISTER_BASE 0xfffff0000000ULL
/* register offsets relative to CSR_REGISTER_BASE */
-#define CSR_STATE_CLEAR 0x0
-#define CSR_STATE_SET 0x4
-#define CSR_NODE_IDS 0x8
-#define CSR_RESET_START 0xc
-#define CSR_SPLIT_TIMEOUT_HI 0x18
-#define CSR_SPLIT_TIMEOUT_LO 0x1c
-#define CSR_CYCLE_TIME 0x200
-#define CSR_BUS_TIME 0x204
-#define CSR_BUSY_TIMEOUT 0x210
-#define CSR_BUS_MANAGER_ID 0x21c
-#define CSR_BANDWIDTH_AVAILABLE 0x220
-#define CSR_CHANNELS_AVAILABLE 0x224
-#define CSR_CHANNELS_AVAILABLE_HI 0x224
-#define CSR_CHANNELS_AVAILABLE_LO 0x228
-#define CSR_BROADCAST_CHANNEL 0x234
-#define CSR_CONFIG_ROM 0x400
-#define CSR_CONFIG_ROM_END 0x800
-#define CSR_FCP_COMMAND 0xB00
-#define CSR_FCP_RESPONSE 0xD00
-#define CSR_FCP_END 0xF00
-#define CSR_TOPOLOGY_MAP 0x1000
-#define CSR_TOPOLOGY_MAP_END 0x1400
-#define CSR_SPEED_MAP 0x2000
-#define CSR_SPEED_MAP_END 0x3000
+#define CSR_STATE_CLEAR 0x0
+#define CSR_STATE_SET 0x4
+#define CSR_NODE_IDS 0x8
+#define CSR_RESET_START 0xc
+#define CSR_SPLIT_TIMEOUT_HI 0x18
+#define CSR_SPLIT_TIMEOUT_LO 0x1c
+#define CSR_CYCLE_TIME 0x200
+#define CSR_BUS_TIME 0x204
+#define CSR_BUSY_TIMEOUT 0x210
+#define CSR_BUS_MANAGER_ID 0x21c
+#define CSR_BANDWIDTH_AVAILABLE 0x220
+#define CSR_CHANNELS_AVAILABLE 0x224
+#define CSR_CHANNELS_AVAILABLE_HI 0x224
+#define CSR_CHANNELS_AVAILABLE_LO 0x228
+#define CSR_BROADCAST_CHANNEL 0x234
+#define CSR_CONFIG_ROM 0x400
+#define CSR_CONFIG_ROM_END 0x800
+#define CSR_FCP_COMMAND 0xB00
+#define CSR_FCP_RESPONSE 0xD00
+#define CSR_FCP_END 0xF00
+#define CSR_TOPOLOGY_MAP 0x1000
+#define CSR_TOPOLOGY_MAP_END 0x1400
+#define CSR_SPEED_MAP 0x2000
+#define CSR_SPEED_MAP_END 0x3000
/* IEEE 1394 bus specific Configuration ROM Key IDs */
#define IEEE1394_KV_ID_POWER_REQUIREMENTS (0x30)
-/* IEEE 1394 Bus Inforamation Block specifics */
+/* IEEE 1394 Bus Information Block specifics */
#define CSR_BUS_INFO_SIZE (5 * sizeof(quadlet_t))
-#define CSR_IRMC_SHIFT 31
-#define CSR_CMC_SHIFT 30
-#define CSR_ISC_SHIFT 29
-#define CSR_BMC_SHIFT 28
-#define CSR_PMC_SHIFT 27
-#define CSR_CYC_CLK_ACC_SHIFT 16
-#define CSR_MAX_REC_SHIFT 12
-#define CSR_MAX_ROM_SHIFT 8
-#define CSR_GENERATION_SHIFT 4
+#define CSR_IRMC_SHIFT 31
+#define CSR_CMC_SHIFT 30
+#define CSR_ISC_SHIFT 29
+#define CSR_BMC_SHIFT 28
+#define CSR_PMC_SHIFT 27
+#define CSR_CYC_CLK_ACC_SHIFT 16
+#define CSR_MAX_REC_SHIFT 12
+#define CSR_MAX_ROM_SHIFT 8
+#define CSR_GENERATION_SHIFT 4
#define CSR_SET_BUS_INFO_GENERATION(csr, gen) \
((csr)->bus_info_data[2] = \
cpu_to_be32((be32_to_cpu((csr)->bus_info_data[2]) & \
- ~(0xf << CSR_GENERATION_SHIFT)) | \
+ ~(0xf << CSR_GENERATION_SHIFT)) | \
(gen) << CSR_GENERATION_SHIFT))
struct csr_control {
- spinlock_t lock;
-
- quadlet_t state;
- quadlet_t node_ids;
- quadlet_t split_timeout_hi, split_timeout_lo;
- unsigned long expire; // Calculated from split_timeout
- quadlet_t cycle_time;
- quadlet_t bus_time;
- quadlet_t bus_manager_id;
- quadlet_t bandwidth_available;
- quadlet_t channels_available_hi, channels_available_lo;
+ spinlock_t lock;
+
+ quadlet_t state;
+ quadlet_t node_ids;
+ quadlet_t split_timeout_hi, split_timeout_lo;
+ unsigned long expire; /* Calculated from split_timeout */
+ quadlet_t cycle_time;
+ quadlet_t bus_time;
+ quadlet_t bus_manager_id;
+ quadlet_t bandwidth_available;
+ quadlet_t channels_available_hi, channels_available_lo;
quadlet_t broadcast_channel;
/* Bus Info */
struct csr1212_csr *rom;
- quadlet_t topology_map[256];
- quadlet_t speed_map[1024];
+ quadlet_t topology_map[256];
+ quadlet_t speed_map[1024];
};
extern struct csr1212_bus_ops csr_bus_ops;
int init_csr(void);
void cleanup_csr(void);
+/* hpsb_update_config_rom() is deprecated */
+struct hpsb_host;
+int hpsb_update_config_rom(struct hpsb_host *host, const quadlet_t *new_rom,
+ size_t size, unsigned char rom_version);
+
#endif /* _IEEE1394_CSR_H */
* directory of the kernel sources for details.
*/
+#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/vmalloc.h>
+#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <asm/scatterlist.h>
+
#include "dma.h"
/* dma_prog_region */
#ifndef IEEE1394_DMA_H
#define IEEE1394_DMA_H
-#include <linux/pci.h>
-#include <asm/scatterlist.h>
-
-/* struct dma_prog_region
-
- a small, physically-contiguous DMA buffer with random-access,
- synchronous usage characteristics
-*/
-
+#include <asm/types.h>
+
+struct pci_dev;
+struct scatterlist;
+struct vm_area_struct;
+
+/**
+ * struct dma_prog_region - small contiguous DMA buffer
+ * @kvirt: kernel virtual address
+ * @dev: PCI device
+ * @n_pages: number of kernel pages
+ * @bus_addr: base bus address
+ *
+ * a small, physically contiguous DMA buffer with random-access, synchronous
+ * usage characteristics
+ */
struct dma_prog_region {
- unsigned char *kvirt; /* kernel virtual address */
- struct pci_dev *dev; /* PCI device */
- unsigned int n_pages; /* # of kernel pages */
- dma_addr_t bus_addr; /* base bus address */
+ unsigned char *kvirt;
+ struct pci_dev *dev;
+ unsigned int n_pages;
+ dma_addr_t bus_addr;
};
/* clear out all fields but do not allocate any memory */
void dma_prog_region_init(struct dma_prog_region *prog);
-int dma_prog_region_alloc(struct dma_prog_region *prog, unsigned long n_bytes, struct pci_dev *dev);
+int dma_prog_region_alloc(struct dma_prog_region *prog, unsigned long n_bytes,
+ struct pci_dev *dev);
void dma_prog_region_free(struct dma_prog_region *prog);
-static inline dma_addr_t dma_prog_region_offset_to_bus(struct dma_prog_region *prog, unsigned long offset)
+static inline dma_addr_t dma_prog_region_offset_to_bus(
+ struct dma_prog_region *prog, unsigned long offset)
{
return prog->bus_addr + offset;
}
-/* struct dma_region
-
- a large, non-physically-contiguous DMA buffer with streaming,
- asynchronous usage characteristics
-*/
-
+/**
+ * struct dma_region - large non-contiguous DMA buffer
+ * @virt: kernel virtual address
+ * @dev: PCI device
+ * @n_pages: number of kernel pages
+ * @n_dma_pages: number of IOMMU pages
+ * @sglist: IOMMU mapping
+ * @direction: PCI_DMA_TODEVICE, etc.
+ *
+ * a large, non-physically-contiguous DMA buffer with streaming, asynchronous
+ * usage characteristics
+ */
struct dma_region {
- unsigned char *kvirt; /* kernel virtual address */
- struct pci_dev *dev; /* PCI device */
- unsigned int n_pages; /* # of kernel pages */
- unsigned int n_dma_pages; /* # of IOMMU pages */
- struct scatterlist *sglist; /* IOMMU mapping */
- int direction; /* PCI_DMA_TODEVICE, etc */
+ unsigned char *kvirt;
+ struct pci_dev *dev;
+ unsigned int n_pages;
+ unsigned int n_dma_pages;
+ struct scatterlist *sglist;
+ int direction;
};
/* clear out all fields but do not allocate anything */
void dma_region_init(struct dma_region *dma);
/* allocate the buffer and map it to the IOMMU */
-int dma_region_alloc(struct dma_region *dma, unsigned long n_bytes, struct pci_dev *dev, int direction);
+int dma_region_alloc(struct dma_region *dma, unsigned long n_bytes,
+ struct pci_dev *dev, int direction);
/* unmap and free the buffer */
void dma_region_free(struct dma_region *dma);
/* sync the CPU's view of the buffer */
-void dma_region_sync_for_cpu(struct dma_region *dma, unsigned long offset, unsigned long len);
+void dma_region_sync_for_cpu(struct dma_region *dma, unsigned long offset,
+ unsigned long len);
+
/* sync the IO bus' view of the buffer */
-void dma_region_sync_for_device(struct dma_region *dma, unsigned long offset, unsigned long len);
+void dma_region_sync_for_device(struct dma_region *dma, unsigned long offset,
+ unsigned long len);
/* map the buffer into a user space process */
-int dma_region_mmap(struct dma_region *dma, struct file *file, struct vm_area_struct *vma);
+int dma_region_mmap(struct dma_region *dma, struct file *file,
+ struct vm_area_struct *vma);
/* macro to index into a DMA region (or dma_prog_region) */
-#define dma_region_i(_dma, _type, _index) ( ((_type*) ((_dma)->kvirt)) + (_index) )
+#define dma_region_i(_dma, _type, _index) \
+ ( ((_type*) ((_dma)->kvirt)) + (_index) )
/* return the DMA bus address of the byte with the given offset
- relative to the beginning of the dma_region */
-dma_addr_t dma_region_offset_to_bus(struct dma_region *dma, unsigned long offset);
+ * relative to the beginning of the dma_region */
+dma_addr_t dma_region_offset_to_bus(struct dma_region *dma,
+ unsigned long offset);
#endif /* IEEE1394_DMA_H */
int dma_running;
/*
- 3) the sleeping semaphore 'sem' - this is used from process context only,
+ 3) the sleeping mutex 'mtx' - this is used from process context only,
to serialize various operations on the video_card. Even though only one
open() is allowed, we still need to prevent multiple threads of execution
from entering calls like read, write, ioctl, etc.
I honestly can't think of a good reason to use dv1394 from several threads
at once, but we need to serialize anyway to prevent oopses =).
- NOTE: if you need both spinlock and sem, take sem first to avoid deadlock!
+ NOTE: if you need both spinlock and mtx, take mtx first to avoid deadlock!
*/
- struct semaphore sem;
+ struct mutex mtx;
/* people waiting for buffer space, please form a line here... */
wait_queue_head_t waitq;
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/bitops.h>
#include <asm/byteorder.h>
#include <asm/atomic.h>
#include <linux/compat.h>
#include <linux/cdev.h>
+#include "dv1394.h"
+#include "dv1394-private.h"
+#include "highlevel.h"
+#include "hosts.h"
#include "ieee1394.h"
+#include "ieee1394_core.h"
+#include "ieee1394_hotplug.h"
#include "ieee1394_types.h"
#include "nodemgr.h"
-#include "hosts.h"
-#include "ieee1394_core.h"
-#include "highlevel.h"
-#include "dv1394.h"
-#include "dv1394-private.h"
-
#include "ohci1394.h"
/* DEBUG LEVELS:
#if DV1394_DEBUG_LEVEL >= 2
#define irq_printk( args... ) printk( args )
#else
-#define irq_printk( args... )
+#define irq_printk( args... ) do {} while (0)
#endif
#if DV1394_DEBUG_LEVEL >= 1
#define debug_printk( args... ) printk( args)
#else
-#define debug_printk( args... )
+#define debug_printk( args... ) do {} while (0)
#endif
/* issue a dummy PCI read to force the preceding write
Frame_prepare() must be called OUTSIDE the video->spinlock.
However, frame_prepare() must still be serialized, so
- it should be called WITH the video->sem taken.
+ it should be called WITH the video->mtx taken.
*/
static void frame_prepare(struct video_card *video, unsigned int this_frame)
int retval = -EINVAL;
/* serialize mmap */
- down(&video->sem);
+ mutex_lock(&video->mtx);
if ( ! video_card_initialized(video) ) {
retval = do_dv1394_init_default(video);
retval = dma_region_mmap(&video->dv_buf, file, vma);
out:
- up(&video->sem);
+ mutex_unlock(&video->mtx);
return retval;
}
/* serialize this to prevent multi-threaded mayhem */
if (file->f_flags & O_NONBLOCK) {
- if (down_trylock(&video->sem))
+ if (!mutex_trylock(&video->mtx))
return -EAGAIN;
} else {
- if (down_interruptible(&video->sem))
+ if (mutex_lock_interruptible(&video->mtx))
return -ERESTARTSYS;
}
if ( !video_card_initialized(video) ) {
ret = do_dv1394_init_default(video);
if (ret) {
- up(&video->sem);
+ mutex_unlock(&video->mtx);
return ret;
}
}
remove_wait_queue(&video->waitq, &wait);
set_current_state(TASK_RUNNING);
- up(&video->sem);
+ mutex_unlock(&video->mtx);
return ret;
}
/* serialize this to prevent multi-threaded mayhem */
if (file->f_flags & O_NONBLOCK) {
- if (down_trylock(&video->sem))
+ if (!mutex_trylock(&video->mtx))
return -EAGAIN;
} else {
- if (down_interruptible(&video->sem))
+ if (mutex_lock_interruptible(&video->mtx))
return -ERESTARTSYS;
}
if ( !video_card_initialized(video) ) {
ret = do_dv1394_init_default(video);
if (ret) {
- up(&video->sem);
+ mutex_unlock(&video->mtx);
return ret;
}
video->continuity_counter = -1;
remove_wait_queue(&video->waitq, &wait);
set_current_state(TASK_RUNNING);
- up(&video->sem);
+ mutex_unlock(&video->mtx);
return ret;
}
/* serialize this to prevent multi-threaded mayhem */
if (file->f_flags & O_NONBLOCK) {
- if (down_trylock(&video->sem)) {
+ if (!mutex_trylock(&video->mtx)) {
unlock_kernel();
return -EAGAIN;
}
} else {
- if (down_interruptible(&video->sem)) {
+ if (mutex_lock_interruptible(&video->mtx)) {
unlock_kernel();
return -ERESTARTSYS;
}
}
out:
- up(&video->sem);
+ mutex_unlock(&video->mtx);
unlock_kernel();
return ret;
}
clear_bit(0, &video->open);
spin_lock_init(&video->spinlock);
video->dma_running = 0;
- init_MUTEX(&video->sem);
+ mutex_init(&video->mtx);
init_waitqueue_head(&video->waitq);
video->fasync = NULL;
#include <linux/ethtool.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
-#include <asm/semaphore.h>
#include <net/arp.h>
+#include "config_roms.h"
#include "csr1212.h"
-#include "ieee1394_types.h"
+#include "eth1394.h"
+#include "highlevel.h"
+#include "ieee1394.h"
#include "ieee1394_core.h"
+#include "ieee1394_hotplug.h"
#include "ieee1394_transactions.h"
-#include "ieee1394.h"
-#include "highlevel.h"
+#include "ieee1394_types.h"
#include "iso.h"
#include "nodemgr.h"
-#include "eth1394.h"
-#include "config_roms.h"
#define ETH1394_PRINT_G(level, fmt, args...) \
printk(level "%s: " fmt, driver_name, ## args)
-
#ifndef IEEE1394_HIGHLEVEL_H
#define IEEE1394_HIGHLEVEL_H
+#include <linux/list.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
-struct hpsb_address_serve {
- struct list_head host_list; /* per host list */
+struct module;
- struct list_head hl_list; /* hpsb_highlevel list */
+#include "ieee1394_types.h"
- struct hpsb_address_ops *op;
+struct hpsb_host;
+/* internal to ieee1394 core */
+struct hpsb_address_serve {
+ struct list_head host_list; /* per host list */
+ struct list_head hl_list; /* hpsb_highlevel list */
+ struct hpsb_address_ops *op;
struct hpsb_host *host;
-
- /* first address handled and first address behind, quadlet aligned */
- u64 start, end;
+ u64 start; /* first address handled, quadlet aligned */
+ u64 end; /* first address behind, quadlet aligned */
};
-
-/*
- * The above structs are internal to highlevel driver handling. Only the
- * following structures are of interest to actual highlevel drivers.
- */
+/* Only the following structures are of interest to actual highlevel drivers. */
struct hpsb_highlevel {
struct module *owner;
const char *name;
- /* Any of the following pointers can legally be NULL, except for
- * iso_receive which can only be NULL when you don't request
- * channels. */
+ /* Any of the following pointers can legally be NULL, except for
+ * iso_receive which can only be NULL when you don't request
+ * channels. */
- /* New host initialized. Will also be called during
- * hpsb_register_highlevel for all hosts already installed. */
- void (*add_host) (struct hpsb_host *host);
+ /* New host initialized. Will also be called during
+ * hpsb_register_highlevel for all hosts already installed. */
+ void (*add_host)(struct hpsb_host *host);
- /* Host about to be removed. Will also be called during
- * hpsb_unregister_highlevel once for each host. */
- void (*remove_host) (struct hpsb_host *host);
+ /* Host about to be removed. Will also be called during
+ * hpsb_unregister_highlevel once for each host. */
+ void (*remove_host)(struct hpsb_host *host);
- /* Host experienced bus reset with possible configuration changes.
+ /* Host experienced bus reset with possible configuration changes.
* Note that this one may occur during interrupt/bottom half handling.
* You can not expect to be able to do stock hpsb_reads. */
- void (*host_reset) (struct hpsb_host *host);
+ void (*host_reset)(struct hpsb_host *host);
- /* An isochronous packet was received. Channel contains the channel
- * number for your convenience, it is also contained in the included
- * packet header (first quadlet, CRCs are missing). You may get called
- * for channel/host combinations you did not request. */
- void (*iso_receive) (struct hpsb_host *host, int channel,
- quadlet_t *data, size_t length);
+ /* An isochronous packet was received. Channel contains the channel
+ * number for your convenience, it is also contained in the included
+ * packet header (first quadlet, CRCs are missing). You may get called
+ * for channel/host combinations you did not request. */
+ void (*iso_receive)(struct hpsb_host *host, int channel,
+ quadlet_t *data, size_t length);
- /* A write request was received on either the FCP_COMMAND (direction =
- * 0) or the FCP_RESPONSE (direction = 1) register. The cts arg
- * contains the cts field (first byte of data). */
- void (*fcp_request) (struct hpsb_host *host, int nodeid, int direction,
- int cts, u8 *data, size_t length);
+ /* A write request was received on either the FCP_COMMAND (direction =
+ * 0) or the FCP_RESPONSE (direction = 1) register. The cts arg
+ * contains the cts field (first byte of data). */
+ void (*fcp_request)(struct hpsb_host *host, int nodeid, int direction,
+ int cts, u8 *data, size_t length);
/* These are initialized by the subsystem when the
* hpsb_higlevel is registered. */
};
struct hpsb_address_ops {
- /*
- * Null function pointers will make the respective operation complete
- * with RCODE_TYPE_ERROR. Makes for easy to implement read-only
- * registers (just leave everything but read NULL).
- *
- * All functions shall return appropriate IEEE 1394 rcodes.
- */
-
- /* These functions have to implement block reads for themselves. */
- /* These functions either return a response code
- or a negative number. In the first case a response will be generated; in the
- later case, no response will be sent and the driver, that handled the request
- will send the response itself
- */
- int (*read) (struct hpsb_host *host, int nodeid, quadlet_t *buffer,
- u64 addr, size_t length, u16 flags);
- int (*write) (struct hpsb_host *host, int nodeid, int destid,
- quadlet_t *data, u64 addr, size_t length, u16 flags);
-
- /* Lock transactions: write results of ext_tcode operation into
- * *store. */
- int (*lock) (struct hpsb_host *host, int nodeid, quadlet_t *store,
- u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags);
- int (*lock64) (struct hpsb_host *host, int nodeid, octlet_t *store,
- u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags);
+ /*
+ * Null function pointers will make the respective operation complete
+ * with RCODE_TYPE_ERROR. Makes for easy to implement read-only
+ * registers (just leave everything but read NULL).
+ *
+ * All functions shall return appropriate IEEE 1394 rcodes.
+ */
+
+ /* These functions have to implement block reads for themselves.
+ *
+ * These functions either return a response code or a negative number.
+ * In the first case a response will be generated. In the latter case,
+ * no response will be sent and the driver which handled the request
+ * will send the response itself. */
+ int (*read)(struct hpsb_host *host, int nodeid, quadlet_t *buffer,
+ u64 addr, size_t length, u16 flags);
+ int (*write)(struct hpsb_host *host, int nodeid, int destid,
+ quadlet_t *data, u64 addr, size_t length, u16 flags);
+
+ /* Lock transactions: write results of ext_tcode operation into
+ * *store. */
+ int (*lock)(struct hpsb_host *host, int nodeid, quadlet_t *store,
+ u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
+ u16 flags);
+ int (*lock64)(struct hpsb_host *host, int nodeid, octlet_t *store,
+ u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
+ u16 flags);
};
-
void highlevel_add_host(struct hpsb_host *host);
void highlevel_remove_host(struct hpsb_host *host);
void highlevel_host_reset(struct hpsb_host *host);
-
-/* these functions are called to handle transactions. They are called, when
- a packet arrives. The flags argument contains the second word of the first header
- quadlet of the incoming packet (containing transaction label, retry code,
- transaction code and priority). These functions either return a response code
- or a negative number. In the first case a response will be generated; in the
- later case, no response will be sent and the driver, that handled the request
- will send the response itself.
-*/
-int highlevel_read(struct hpsb_host *host, int nodeid, void *data,
- u64 addr, unsigned int length, u16 flags);
-int highlevel_write(struct hpsb_host *host, int nodeid, int destid,
- void *data, u64 addr, unsigned int length, u16 flags);
+/*
+ * These functions are called to handle transactions. They are called when a
+ * packet arrives. The flags argument contains the second word of the first
+ * header quadlet of the incoming packet (containing transaction label, retry
+ * code, transaction code and priority). These functions either return a
+ * response code or a negative number. In the first case a response will be
+ * generated. In the latter case, no response will be sent and the driver which
+ * handled the request will send the response itself.
+ */
+int highlevel_read(struct hpsb_host *host, int nodeid, void *data, u64 addr,
+ unsigned int length, u16 flags);
+int highlevel_write(struct hpsb_host *host, int nodeid, int destid, void *data,
+ u64 addr, unsigned int length, u16 flags);
int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
- u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags);
+ u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
+ u16 flags);
int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store,
- u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags);
+ u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
+ u16 flags);
-void highlevel_iso_receive(struct hpsb_host *host, void *data,
- size_t length);
+void highlevel_iso_receive(struct hpsb_host *host, void *data, size_t length);
void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
- void *data, size_t length);
-
+ void *data, size_t length);
/*
* Register highlevel driver. The name pointer has to stay valid at all times
/*
* Register handlers for host address spaces. Start and end are 48 bit pointers
- * and have to be quadlet aligned (end points to the first address behind the
- * handled addresses. This function can be called multiple times for a single
- * hpsb_highlevel to implement sparse register sets. The requested region must
- * not overlap any previously allocated region, otherwise registering will fail.
+ * and have to be quadlet aligned. Argument "end" points to the first address
+ * behind the handled addresses. This function can be called multiple times for
+ * a single hpsb_highlevel to implement sparse register sets. The requested
+ * region must not overlap any previously allocated region, otherwise
+ * registering will fail.
*
- * It returns true for successful allocation. There is no unregister function,
- * all address spaces are deallocated together with the hpsb_highlevel.
+ * It returns true for successful allocation. Address spaces can be
+ * unregistered with hpsb_unregister_addrspace. All remaining address spaces
+ * are automatically deallocated together with the hpsb_highlevel.
*/
u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl,
struct hpsb_host *host,
u64 size, u64 alignment,
u64 start, u64 end);
int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
- struct hpsb_address_ops *ops, u64 start, u64 end);
-
+ struct hpsb_address_ops *ops, u64 start, u64 end);
int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
- u64 start);
+ u64 start);
/*
* Enable or disable receving a certain isochronous channel through the
* iso_receive op.
*/
int hpsb_listen_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
- unsigned int channel);
+ unsigned int channel);
void hpsb_unlisten_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
- unsigned int channel);
-
+ unsigned int channel);
/* Retrieve a hostinfo pointer bound to this driver/host */
void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
void hpsb_destroy_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
/* Set an alternate lookup key for the hostinfo bound to this driver/host */
-void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host, unsigned long key);
+void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host,
+ unsigned long key);
-/* Retrieve the alternate lookup key for the hostinfo bound to this driver/host */
-unsigned long hpsb_get_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host);
+/* Retrieve the alternate lookup key for the hostinfo bound to this
+ * driver/host */
+unsigned long hpsb_get_hostinfo_key(struct hpsb_highlevel *hl,
+ struct hpsb_host *host);
/* Retrieve a hostinfo pointer bound to this driver using its alternate key */
void *hpsb_get_hostinfo_bykey(struct hpsb_highlevel *hl, unsigned long key);
/* Set the hostinfo pointer to something useful. Usually follows a call to
* hpsb_create_hostinfo, where the size is 0. */
-int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host, void *data);
+int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
+ void *data);
/* Retrieve hpsb_host using a highlevel handle and a key */
-struct hpsb_host *hpsb_get_host_bykey(struct hpsb_highlevel *hl, unsigned long key);
+struct hpsb_host *hpsb_get_host_bykey(struct hpsb_highlevel *hl,
+ unsigned long key);
#endif /* IEEE1394_HIGHLEVEL_H */
return 0;
}
+/*
+ * The pending_packet_queue is special in that it's processed
+ * from hardirq context too (such as hpsb_bus_reset()). Hence
+ * split the lock class from the usual networking skb-head
+ * lock class by using a separate key for it:
+ */
+static struct lock_class_key pending_packet_queue_key;
+
+static DEFINE_MUTEX(host_num_alloc);
+
/**
* hpsb_alloc_host - allocate a new host controller.
* @drv: the driver that will manage the host controller
* Return Value: a pointer to the &hpsb_host if successful, %NULL if
* no memory was available.
*/
-static DEFINE_MUTEX(host_num_alloc);
-
-/*
- * The pending_packet_queue is special in that it's processed
- * from hardirq context too (such as hpsb_bus_reset()). Hence
- * split the lock class from the usual networking skb-head
- * lock class by using a separate key for it:
- */
-static struct lock_class_key pending_packet_queue_key;
-
struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
struct device *dev)
{
for (i = 2; i < 16; i++)
h->csr.gen_timestamp[i] = jiffies - 60 * HZ;
- for (i = 0; i < ARRAY_SIZE(h->tpool); i++)
- HPSB_TPOOL_INIT(&h->tpool[i]);
-
atomic_set(&h->generation, 0);
INIT_WORK(&h->delayed_reset, delayed_reset_bus, h);
#define _IEEE1394_HOSTS_H
#include <linux/device.h>
-#include <linux/wait.h>
#include <linux/list.h>
-#include <linux/timer.h>
#include <linux/skbuff.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
-#include <asm/semaphore.h>
+struct pci_dev;
+struct module;
#include "ieee1394_types.h"
#include "csr.h"
-
struct hpsb_packet;
struct hpsb_iso;
int node_count; /* number of identified nodes on this bus */
int selfid_count; /* total number of SelfIDs received */
int nodes_active; /* number of nodes with active link layer */
- u8 speed[ALL_NODES]; /* speed between each node and local node */
nodeid_t node_id; /* node ID of this host */
nodeid_t irm_id; /* ID of this bus' isochronous resource manager */
int reset_retries;
quadlet_t *topology_map;
u8 *speed_map;
- struct csr_control csr;
-
- /* Per node tlabel pool allocation */
- struct hpsb_tlabel_pool tpool[ALL_NODES];
+ int id;
struct hpsb_host_driver *driver;
-
struct pci_dev *pdev;
-
- int id;
-
struct device device;
struct class_device class_dev;
int update_config_rom;
struct work_struct delayed_reset;
-
unsigned int config_roms;
struct list_head addr_space;
u64 low_addr_space; /* upper bound of physical DMA area */
u64 middle_addr_space; /* upper bound of posted write area */
-};
+ u8 speed[ALL_NODES]; /* speed between each node and local node */
+
+ /* per node tlabel allocation */
+ u8 next_tl[ALL_NODES];
+ struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
+ struct csr_control csr;
+};
enum devctl_cmd {
/* Host is requested to reset its bus and cancel all outstanding async
enum isoctl_cmd {
/* rawiso API - see iso.h for the meanings of these commands
- (they correspond exactly to the hpsb_iso_* API functions)
+ * (they correspond exactly to the hpsb_iso_* API functions)
* INIT = allocate resources
* START = begin transmission/reception
* STOP = halt transmission/reception
/* The hardware driver may optionally support a function that is used
* to set the hardware ConfigROM if the hardware supports handling
* reads to the ConfigROM on its own. */
- void (*set_hw_config_rom) (struct hpsb_host *host, quadlet_t *config_rom);
+ void (*set_hw_config_rom)(struct hpsb_host *host,
+ quadlet_t *config_rom);
/* This function shall implement packet transmission based on
* packet->type. It shall CRC both parts of the packet (unless
* called. Return 0 on success, negative errno on failure.
* NOTE: The function must be callable in interrupt context.
*/
- int (*transmit_packet) (struct hpsb_host *host,
- struct hpsb_packet *packet);
+ int (*transmit_packet)(struct hpsb_host *host,
+ struct hpsb_packet *packet);
/* This function requests miscellanous services from the driver, see
* above for command codes and expected actions. Return -1 for unknown
* command, though that should never happen.
*/
- int (*devctl) (struct hpsb_host *host, enum devctl_cmd command, int arg);
+ int (*devctl)(struct hpsb_host *host, enum devctl_cmd command, int arg);
/* ISO transmission/reception functions. Return 0 on success, -1
* (or -EXXX errno code) on failure. If the low-level driver does not
* support the new ISO API, set isoctl to NULL.
*/
- int (*isoctl) (struct hpsb_iso *iso, enum isoctl_cmd command, unsigned long arg);
+ int (*isoctl)(struct hpsb_iso *iso, enum isoctl_cmd command,
+ unsigned long arg);
/* This function is mainly to redirect local CSR reads/locks to the iso
* management registers (bus manager id, bandwidth available, channels
quadlet_t data, quadlet_t compare);
};
-
struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
struct device *dev);
int hpsb_add_host(struct hpsb_host *host);
void hpsb_remove_host(struct hpsb_host *h);
-/* The following 2 functions are deprecated and will be removed when the
- * raw1394/libraw1394 update is complete. */
-int hpsb_update_config_rom(struct hpsb_host *host,
- const quadlet_t *new_rom, size_t size, unsigned char rom_version);
-int hpsb_get_config_rom(struct hpsb_host *host, quadlet_t *buffer,
- size_t buffersize, size_t *rom_size, unsigned char *rom_version);
-
/* Updates the configuration rom image of a host. rom_version must be the
* current version, otherwise it will fail with return value -1. If this
* host does not support config-rom-update, it will return -EINVAL.
-/* Base file for all ieee1394 ioctl's. Linux-1394 has allocated base '#'
- * with a range of 0x00-0x3f. */
+/*
+ * Base file for all ieee1394 ioctl's.
+ * Linux-1394 has allocated base '#' with a range of 0x00-0x3f.
+ */
#ifndef __IEEE1394_IOCTL_H
#define __IEEE1394_IOCTL_H
_IOW ('#', 0x27, struct raw1394_iso_packets)
#define RAW1394_IOC_ISO_XMIT_SYNC \
_IO ('#', 0x28)
-#define RAW1394_IOC_ISO_RECV_FLUSH \
+#define RAW1394_IOC_ISO_RECV_FLUSH \
_IO ('#', 0x29)
-
#endif /* __IEEE1394_IOCTL_H */
#ifndef _IEEE1394_IEEE1394_H
#define _IEEE1394_IEEE1394_H
-#define TCODE_WRITEQ 0x0
-#define TCODE_WRITEB 0x1
-#define TCODE_WRITE_RESPONSE 0x2
-#define TCODE_READQ 0x4
-#define TCODE_READB 0x5
-#define TCODE_READQ_RESPONSE 0x6
-#define TCODE_READB_RESPONSE 0x7
-#define TCODE_CYCLE_START 0x8
-#define TCODE_LOCK_REQUEST 0x9
-#define TCODE_ISO_DATA 0xa
-#define TCODE_STREAM_DATA 0xa
-#define TCODE_LOCK_RESPONSE 0xb
-
-#define RCODE_COMPLETE 0x0
-#define RCODE_CONFLICT_ERROR 0x4
-#define RCODE_DATA_ERROR 0x5
-#define RCODE_TYPE_ERROR 0x6
-#define RCODE_ADDRESS_ERROR 0x7
-
-#define EXTCODE_MASK_SWAP 0x1
-#define EXTCODE_COMPARE_SWAP 0x2
-#define EXTCODE_FETCH_ADD 0x3
-#define EXTCODE_LITTLE_ADD 0x4
-#define EXTCODE_BOUNDED_ADD 0x5
-#define EXTCODE_WRAP_ADD 0x6
-
-#define ACK_COMPLETE 0x1
-#define ACK_PENDING 0x2
-#define ACK_BUSY_X 0x4
-#define ACK_BUSY_A 0x5
-#define ACK_BUSY_B 0x6
-#define ACK_TARDY 0xb
-#define ACK_CONFLICT_ERROR 0xc
-#define ACK_DATA_ERROR 0xd
-#define ACK_TYPE_ERROR 0xe
-#define ACK_ADDRESS_ERROR 0xf
+#define TCODE_WRITEQ 0x0
+#define TCODE_WRITEB 0x1
+#define TCODE_WRITE_RESPONSE 0x2
+#define TCODE_READQ 0x4
+#define TCODE_READB 0x5
+#define TCODE_READQ_RESPONSE 0x6
+#define TCODE_READB_RESPONSE 0x7
+#define TCODE_CYCLE_START 0x8
+#define TCODE_LOCK_REQUEST 0x9
+#define TCODE_ISO_DATA 0xa
+#define TCODE_STREAM_DATA 0xa
+#define TCODE_LOCK_RESPONSE 0xb
+
+#define RCODE_COMPLETE 0x0
+#define RCODE_CONFLICT_ERROR 0x4
+#define RCODE_DATA_ERROR 0x5
+#define RCODE_TYPE_ERROR 0x6
+#define RCODE_ADDRESS_ERROR 0x7
+
+#define EXTCODE_MASK_SWAP 0x1
+#define EXTCODE_COMPARE_SWAP 0x2
+#define EXTCODE_FETCH_ADD 0x3
+#define EXTCODE_LITTLE_ADD 0x4
+#define EXTCODE_BOUNDED_ADD 0x5
+#define EXTCODE_WRAP_ADD 0x6
+
+#define ACK_COMPLETE 0x1
+#define ACK_PENDING 0x2
+#define ACK_BUSY_X 0x4
+#define ACK_BUSY_A 0x5
+#define ACK_BUSY_B 0x6
+#define ACK_TARDY 0xb
+#define ACK_CONFLICT_ERROR 0xc
+#define ACK_DATA_ERROR 0xd
+#define ACK_TYPE_ERROR 0xe
+#define ACK_ADDRESS_ERROR 0xf
/* Non-standard "ACK codes" for internal use */
-#define ACKX_NONE (-1)
-#define ACKX_SEND_ERROR (-2)
-#define ACKX_ABORTED (-3)
-#define ACKX_TIMEOUT (-4)
-
-
-#define IEEE1394_SPEED_100 0x00
-#define IEEE1394_SPEED_200 0x01
-#define IEEE1394_SPEED_400 0x02
-#define IEEE1394_SPEED_800 0x03
-#define IEEE1394_SPEED_1600 0x04
-#define IEEE1394_SPEED_3200 0x05
+#define ACKX_NONE (-1)
+#define ACKX_SEND_ERROR (-2)
+#define ACKX_ABORTED (-3)
+#define ACKX_TIMEOUT (-4)
+
+#define IEEE1394_SPEED_100 0x00
+#define IEEE1394_SPEED_200 0x01
+#define IEEE1394_SPEED_400 0x02
+#define IEEE1394_SPEED_800 0x03
+#define IEEE1394_SPEED_1600 0x04
+#define IEEE1394_SPEED_3200 0x05
+
/* The current highest tested speed supported by the subsystem */
-#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800
+#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800
/* Maps speed values above to a string representation */
extern const char *hpsb_speedto_str[];
-
/* 1394a cable PHY packets */
-#define SELFID_PWRCL_NO_POWER 0x0
-#define SELFID_PWRCL_PROVIDE_15W 0x1
-#define SELFID_PWRCL_PROVIDE_30W 0x2
-#define SELFID_PWRCL_PROVIDE_45W 0x3
-#define SELFID_PWRCL_USE_1W 0x4
-#define SELFID_PWRCL_USE_3W 0x5
-#define SELFID_PWRCL_USE_6W 0x6
-#define SELFID_PWRCL_USE_10W 0x7
-
-#define SELFID_PORT_CHILD 0x3
-#define SELFID_PORT_PARENT 0x2
-#define SELFID_PORT_NCONN 0x1
-#define SELFID_PORT_NONE 0x0
+#define SELFID_PWRCL_NO_POWER 0x0
+#define SELFID_PWRCL_PROVIDE_15W 0x1
+#define SELFID_PWRCL_PROVIDE_30W 0x2
+#define SELFID_PWRCL_PROVIDE_45W 0x3
+#define SELFID_PWRCL_USE_1W 0x4
+#define SELFID_PWRCL_USE_3W 0x5
+#define SELFID_PWRCL_USE_6W 0x6
+#define SELFID_PWRCL_USE_10W 0x7
+
+#define SELFID_PORT_CHILD 0x3
+#define SELFID_PORT_PARENT 0x2
+#define SELFID_PORT_NCONN 0x1
+#define SELFID_PORT_NONE 0x0
+
+#define SELFID_SPEED_UNKNOWN 0x3 /* 1394b PHY */
#define PHYPACKET_LINKON 0x40000000
#define PHYPACKET_PHYCONFIG_R 0x00800000
#define EXTPHYPACKET_TYPEMASK 0xC0FC0000
-#define PHYPACKET_PORT_SHIFT 24
-#define PHYPACKET_GAPCOUNT_SHIFT 16
+#define PHYPACKET_PORT_SHIFT 24
+#define PHYPACKET_GAPCOUNT_SHIFT 16
/* 1394a PHY register map bitmasks */
-#define PHY_00_PHYSICAL_ID 0xFC
-#define PHY_00_R 0x02 /* Root */
-#define PHY_00_PS 0x01 /* Power Status*/
-#define PHY_01_RHB 0x80 /* Root Hold-Off */
-#define PHY_01_IBR 0x80 /* Initiate Bus Reset */
-#define PHY_01_GAP_COUNT 0x3F
-#define PHY_02_EXTENDED 0xE0 /* 0x7 for 1394a-compliant PHY */
-#define PHY_02_TOTAL_PORTS 0x1F
-#define PHY_03_MAX_SPEED 0xE0
-#define PHY_03_DELAY 0x0F
-#define PHY_04_LCTRL 0x80 /* Link Active Report Control */
-#define PHY_04_CONTENDER 0x40
-#define PHY_04_JITTER 0x38
-#define PHY_04_PWR_CLASS 0x07 /* Power Class */
-#define PHY_05_WATCHDOG 0x80
-#define PHY_05_ISBR 0x40 /* Initiate Short Bus Reset */
-#define PHY_05_LOOP 0x20 /* Loop Detect */
-#define PHY_05_PWR_FAIL 0x10 /* Cable Power Failure Detect */
-#define PHY_05_TIMEOUT 0x08 /* Arbitration State Machine Timeout */
-#define PHY_05_PORT_EVENT 0x04 /* Port Event Detect */
-#define PHY_05_ENAB_ACCEL 0x02 /* Enable Arbitration Acceleration */
-#define PHY_05_ENAB_MULTI 0x01 /* Ena. Multispeed Packet Concatenation */
+#define PHY_00_PHYSICAL_ID 0xFC
+#define PHY_00_R 0x02 /* Root */
+#define PHY_00_PS 0x01 /* Power Status*/
+#define PHY_01_RHB 0x80 /* Root Hold-Off */
+#define PHY_01_IBR 0x80 /* Initiate Bus Reset */
+#define PHY_01_GAP_COUNT 0x3F
+#define PHY_02_EXTENDED 0xE0 /* 0x7 for 1394a-compliant PHY */
+#define PHY_02_TOTAL_PORTS 0x1F
+#define PHY_03_MAX_SPEED 0xE0
+#define PHY_03_DELAY 0x0F
+#define PHY_04_LCTRL 0x80 /* Link Active Report Control */
+#define PHY_04_CONTENDER 0x40
+#define PHY_04_JITTER 0x38
+#define PHY_04_PWR_CLASS 0x07 /* Power Class */
+#define PHY_05_WATCHDOG 0x80
+#define PHY_05_ISBR 0x40 /* Initiate Short Bus Reset */
+#define PHY_05_LOOP 0x20 /* Loop Detect */
+#define PHY_05_PWR_FAIL 0x10 /* Cable Power Failure Detect */
+#define PHY_05_TIMEOUT 0x08 /* Arbitration State Machine Timeout */
+#define PHY_05_PORT_EVENT 0x04 /* Port Event Detect */
+#define PHY_05_ENAB_ACCEL 0x02 /* Enable Arbitration Acceleration */
+#define PHY_05_ENAB_MULTI 0x01 /* Ena. Multispeed Packet Concatenation */
#include <asm/byteorder.h>
#ifdef __BIG_ENDIAN_BITFIELD
struct selfid {
- u32 packet_identifier:2; /* always binary 10 */
- u32 phy_id:6;
- /* byte */
- u32 extended:1; /* if true is struct ext_selfid */
- u32 link_active:1;
- u32 gap_count:6;
- /* byte */
- u32 speed:2;
- u32 phy_delay:2;
- u32 contender:1;
- u32 power_class:3;
- /* byte */
- u32 port0:2;
- u32 port1:2;
- u32 port2:2;
- u32 initiated_reset:1;
- u32 more_packets:1;
+ u32 packet_identifier:2; /* always binary 10 */
+ u32 phy_id:6;
+ /* byte */
+ u32 extended:1; /* if true is struct ext_selfid */
+ u32 link_active:1;
+ u32 gap_count:6;
+ /* byte */
+ u32 speed:2;
+ u32 phy_delay:2;
+ u32 contender:1;
+ u32 power_class:3;
+ /* byte */
+ u32 port0:2;
+ u32 port1:2;
+ u32 port2:2;
+ u32 initiated_reset:1;
+ u32 more_packets:1;
} __attribute__((packed));
struct ext_selfid {
- u32 packet_identifier:2; /* always binary 10 */
- u32 phy_id:6;
- /* byte */
- u32 extended:1; /* if false is struct selfid */
- u32 seq_nr:3;
- u32 reserved:2;
- u32 porta:2;
- /* byte */
- u32 portb:2;
- u32 portc:2;
- u32 portd:2;
- u32 porte:2;
- /* byte */
- u32 portf:2;
- u32 portg:2;
- u32 porth:2;
- u32 reserved2:1;
- u32 more_packets:1;
+ u32 packet_identifier:2; /* always binary 10 */
+ u32 phy_id:6;
+ /* byte */
+ u32 extended:1; /* if false is struct selfid */
+ u32 seq_nr:3;
+ u32 reserved:2;
+ u32 porta:2;
+ /* byte */
+ u32 portb:2;
+ u32 portc:2;
+ u32 portd:2;
+ u32 porte:2;
+ /* byte */
+ u32 portf:2;
+ u32 portg:2;
+ u32 porth:2;
+ u32 reserved2:1;
+ u32 more_packets:1;
} __attribute__((packed));
#elif defined __LITTLE_ENDIAN_BITFIELD /* __BIG_ENDIAN_BITFIELD */
*/
struct selfid {
- u32 phy_id:6;
- u32 packet_identifier:2; /* always binary 10 */
- /* byte */
- u32 gap_count:6;
- u32 link_active:1;
- u32 extended:1; /* if true is struct ext_selfid */
- /* byte */
- u32 power_class:3;
- u32 contender:1;
- u32 phy_delay:2;
- u32 speed:2;
- /* byte */
- u32 more_packets:1;
- u32 initiated_reset:1;
- u32 port2:2;
- u32 port1:2;
- u32 port0:2;
+ u32 phy_id:6;
+ u32 packet_identifier:2; /* always binary 10 */
+ /* byte */
+ u32 gap_count:6;
+ u32 link_active:1;
+ u32 extended:1; /* if true is struct ext_selfid */
+ /* byte */
+ u32 power_class:3;
+ u32 contender:1;
+ u32 phy_delay:2;
+ u32 speed:2;
+ /* byte */
+ u32 more_packets:1;
+ u32 initiated_reset:1;
+ u32 port2:2;
+ u32 port1:2;
+ u32 port0:2;
} __attribute__((packed));
struct ext_selfid {
- u32 phy_id:6;
- u32 packet_identifier:2; /* always binary 10 */
- /* byte */
- u32 porta:2;
- u32 reserved:2;
- u32 seq_nr:3;
- u32 extended:1; /* if false is struct selfid */
- /* byte */
- u32 porte:2;
- u32 portd:2;
- u32 portc:2;
- u32 portb:2;
- /* byte */
- u32 more_packets:1;
- u32 reserved2:1;
- u32 porth:2;
- u32 portg:2;
- u32 portf:2;
+ u32 phy_id:6;
+ u32 packet_identifier:2; /* always binary 10 */
+ /* byte */
+ u32 porta:2;
+ u32 reserved:2;
+ u32 seq_nr:3;
+ u32 extended:1; /* if false is struct selfid */
+ /* byte */
+ u32 porte:2;
+ u32 portd:2;
+ u32 portc:2;
+ u32 portb:2;
+ /* byte */
+ u32 more_packets:1;
+ u32 reserved2:1;
+ u32 porth:2;
+ u32 portg:2;
+ u32 portf:2;
} __attribute__((packed));
#else
#error What? PDP endian?
#endif /* __BIG_ENDIAN_BITFIELD */
-
#endif /* _IEEE1394_IEEE1394_H */
#include <linux/kthread.h>
#include <asm/byteorder.h>
-#include <asm/semaphore.h>
#include "ieee1394_types.h"
#include "ieee1394.h"
printk("\n");
}
#else
-#define dump_packet(a,b,c,d)
+#define dump_packet(a,b,c,d) do {} while (0)
#endif
static void abort_requests(struct hpsb_host *host);
}
}
+#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX
/* assume maximum speed for 1394b PHYs, nodemgr will correct it */
for (n = 0; n < nodecount; n++)
- if (speedcap[n] == 3)
+ if (speedcap[n] == SELFID_SPEED_UNKNOWN)
speedcap[n] = IEEE1394_SPEED_MAX;
+#endif
}
unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
}
-module_init(ieee1394_init);
+fs_initcall(ieee1394_init); /* same as ohci1394 */
module_exit(ieee1394_cleanup);
/* Exported symbols */
-
#ifndef _IEEE1394_CORE_H
#define _IEEE1394_CORE_H
-#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
#include <asm/atomic.h>
-#include <asm/semaphore.h>
-#include "hosts.h"
+#include "hosts.h"
+#include "ieee1394_types.h"
struct hpsb_packet {
/* This struct is basically read-only for hosts with the exception of
size_t header_size;
size_t data_size;
-
struct hpsb_host *host;
unsigned int generation;
/* Set a task for when a packet completes */
void hpsb_set_packet_complete_task(struct hpsb_packet *packet,
- void (*routine)(void *), void *data);
+ void (*routine)(void *), void *data);
static inline struct hpsb_packet *driver_packet(struct list_head *l)
{
struct hpsb_packet *hpsb_alloc_packet(size_t data_size);
void hpsb_free_packet(struct hpsb_packet *packet);
-
/*
* Generation counter for the complete 1394 subsystem. Generation gets
* incremented on every change in the subsystem (e.g. bus reset).
#define IEEE1394_MINOR_BLOCK_EXPERIMENTAL 15
#define IEEE1394_CORE_DEV MKDEV(IEEE1394_MAJOR, 0)
-#define IEEE1394_RAW1394_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16)
-#define IEEE1394_VIDEO1394_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_VIDEO1394 * 16)
-#define IEEE1394_DV1394_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16)
-#define IEEE1394_EXPERIMENTAL_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_EXPERIMENTAL * 16)
+#define IEEE1394_RAW1394_DEV MKDEV(IEEE1394_MAJOR, \
+ IEEE1394_MINOR_BLOCK_RAW1394 * 16)
+#define IEEE1394_VIDEO1394_DEV MKDEV(IEEE1394_MAJOR, \
+ IEEE1394_MINOR_BLOCK_VIDEO1394 * 16)
+#define IEEE1394_DV1394_DEV MKDEV(IEEE1394_MAJOR, \
+ IEEE1394_MINOR_BLOCK_DV1394 * 16)
+#define IEEE1394_EXPERIMENTAL_DEV MKDEV(IEEE1394_MAJOR, \
+ IEEE1394_MINOR_BLOCK_EXPERIMENTAL * 16)
/* return the index (within a minor number block) of a file */
static inline unsigned char ieee1394_file_to_instance(struct file *file)
extern struct class *hpsb_protocol_class;
#endif /* _IEEE1394_CORE_H */
-
#ifndef _IEEE1394_HOTPLUG_H
#define _IEEE1394_HOTPLUG_H
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mod_devicetable.h>
-
/* Unit spec id and sw version entry for some protocols */
#define AVC_UNIT_SPEC_ID_ENTRY 0x0000A02D
#define AVC_SW_VERSION_ENTRY 0x00010001
#define CAMERA_UNIT_SPEC_ID_ENTRY 0x0000A02D
#define CAMERA_SW_VERSION_ENTRY 0x00000100
-/* Check to make sure this all isn't already defined */
-#ifndef IEEE1394_MATCH_VENDOR_ID
-
-#define IEEE1394_MATCH_VENDOR_ID 0x0001
-#define IEEE1394_MATCH_MODEL_ID 0x0002
-#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
-#define IEEE1394_MATCH_VERSION 0x0008
-
-struct ieee1394_device_id {
- u32 match_flags;
- u32 vendor_id;
- u32 model_id;
- u32 specifier_id;
- u32 version;
- void *driver_data;
-};
-
-#endif
+/* /include/linux/mod_devicetable.h defines:
+ * IEEE1394_MATCH_VENDOR_ID
+ * IEEE1394_MATCH_MODEL_ID
+ * IEEE1394_MATCH_SPECIFIER_ID
+ * IEEE1394_MATCH_VERSION
+ * struct ieee1394_device_id
+ */
+#include <linux/mod_devicetable.h>
#endif /* _IEEE1394_HOTPLUG_H */
* directory of the kernel sources for details.
*/
-#include <linux/sched.h>
#include <linux/bitops.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/bug.h>
#include <asm/errno.h>
#include "ieee1394.h"
#include "ieee1394_types.h"
#include "hosts.h"
#include "ieee1394_core.h"
-#include "highlevel.h"
-#include "nodemgr.h"
#include "ieee1394_transactions.h"
#define PREP_ASYNC_HEAD_ADDRESS(tc) \
packet->header[1] = (packet->host->node_id << 16) | (addr >> 32); \
packet->header[2] = addr & 0xffffffff
+#ifndef HPSB_DEBUG_TLABELS
+static
+#endif
+spinlock_t hpsb_tlabel_lock = SPIN_LOCK_UNLOCKED;
+
+static DECLARE_WAIT_QUEUE_HEAD(tlabel_wq);
+
static void fill_async_readquad(struct hpsb_packet *packet, u64 addr)
{
PREP_ASYNC_HEAD_ADDRESS(TCODE_READQ);
packet->tcode = TCODE_ISO_DATA;
}
+/* same as hpsb_get_tlabel, except that it returns immediately */
+static int hpsb_get_tlabel_atomic(struct hpsb_packet *packet)
+{
+ unsigned long flags, *tp;
+ u8 *next;
+ int tlabel, n = NODEID_TO_NODE(packet->node_id);
+
+ /* Broadcast transactions are complete once the request has been sent.
+ * Use the same transaction label for all broadcast transactions. */
+ if (unlikely(n == ALL_NODES)) {
+ packet->tlabel = 0;
+ return 0;
+ }
+ tp = packet->host->tl_pool[n].map;
+ next = &packet->host->next_tl[n];
+
+ spin_lock_irqsave(&hpsb_tlabel_lock, flags);
+ tlabel = find_next_zero_bit(tp, 64, *next);
+ if (tlabel > 63)
+ tlabel = find_first_zero_bit(tp, 64);
+ if (tlabel > 63) {
+ spin_unlock_irqrestore(&hpsb_tlabel_lock, flags);
+ return -EAGAIN;
+ }
+ __set_bit(tlabel, tp);
+ *next = (tlabel + 1) & 63;
+ spin_unlock_irqrestore(&hpsb_tlabel_lock, flags);
+
+ packet->tlabel = tlabel;
+ return 0;
+}
+
/**
* hpsb_get_tlabel - allocate a transaction label
- * @packet: the packet who's tlabel/tpool we set
+ * @packet: the packet whose tlabel and tl_pool we set
*
* Every asynchronous transaction on the 1394 bus needs a transaction
* label to match the response to the request. This label has to be
* Return value: Zero on success, otherwise non-zero. A non-zero return
* generally means there are no available tlabels. If this is called out
* of interrupt or atomic context, then it will sleep until can return a
- * tlabel.
+ * tlabel or a signal is received.
*/
int hpsb_get_tlabel(struct hpsb_packet *packet)
{
- unsigned long flags;
- struct hpsb_tlabel_pool *tp;
- int n = NODEID_TO_NODE(packet->node_id);
-
- if (unlikely(n == ALL_NODES))
- return 0;
- tp = &packet->host->tpool[n];
-
- if (irqs_disabled() || in_atomic()) {
- if (down_trylock(&tp->count))
- return 1;
- } else {
- down(&tp->count);
- }
-
- spin_lock_irqsave(&tp->lock, flags);
-
- packet->tlabel = find_next_zero_bit(tp->pool, 64, tp->next);
- if (packet->tlabel > 63)
- packet->tlabel = find_first_zero_bit(tp->pool, 64);
- tp->next = (packet->tlabel + 1) % 64;
- /* Should _never_ happen */
- BUG_ON(test_and_set_bit(packet->tlabel, tp->pool));
- tp->allocations++;
- spin_unlock_irqrestore(&tp->lock, flags);
-
- return 0;
+ if (irqs_disabled() || in_atomic())
+ return hpsb_get_tlabel_atomic(packet);
+
+ /* NB: The macro wait_event_interruptible() is called with a condition
+ * argument with side effect. This is only possible because the side
+ * effect does not occur until the condition became true, and
+ * wait_event_interruptible() won't evaluate the condition again after
+ * that. */
+ return wait_event_interruptible(tlabel_wq,
+ !hpsb_get_tlabel_atomic(packet));
}
/**
* hpsb_free_tlabel - free an allocated transaction label
- * @packet: packet whos tlabel/tpool needs to be cleared
+ * @packet: packet whose tlabel and tl_pool needs to be cleared
*
* Frees the transaction label allocated with hpsb_get_tlabel(). The
* tlabel has to be freed after the transaction is complete (i.e. response
*/
void hpsb_free_tlabel(struct hpsb_packet *packet)
{
- unsigned long flags;
- struct hpsb_tlabel_pool *tp;
- int n = NODEID_TO_NODE(packet->node_id);
+ unsigned long flags, *tp;
+ int tlabel, n = NODEID_TO_NODE(packet->node_id);
if (unlikely(n == ALL_NODES))
return;
- tp = &packet->host->tpool[n];
+ tp = packet->host->tl_pool[n].map;
+ tlabel = packet->tlabel;
+ BUG_ON(tlabel > 63 || tlabel < 0);
- BUG_ON(packet->tlabel > 63 || packet->tlabel < 0);
+ spin_lock_irqsave(&hpsb_tlabel_lock, flags);
+ BUG_ON(!__test_and_clear_bit(tlabel, tp));
+ spin_unlock_irqrestore(&hpsb_tlabel_lock, flags);
- spin_lock_irqsave(&tp->lock, flags);
- BUG_ON(!test_and_clear_bit(packet->tlabel, tp->pool));
- spin_unlock_irqrestore(&tp->lock, flags);
-
- up(&tp->count);
+ wake_up_interruptible(&tlabel_wq);
}
int hpsb_packet_success(struct hpsb_packet *packet)
packet->node_id);
return -EAGAIN;
}
- HPSB_PANIC("reached unreachable code 1 in %s", __FUNCTION__);
+ BUG();
case ACK_BUSY_X:
case ACK_BUSY_A:
packet->ack_code, packet->node_id, packet->tcode);
return -EAGAIN;
}
-
- HPSB_PANIC("reached unreachable code 2 in %s", __FUNCTION__);
+ BUG();
}
struct hpsb_packet *hpsb_make_readpacket(struct hpsb_host *host, nodeid_t node,
#ifndef _IEEE1394_TRANSACTIONS_H
#define _IEEE1394_TRANSACTIONS_H
-#include "ieee1394_core.h"
+#include <linux/types.h>
+#include "ieee1394_types.h"
+
+struct hpsb_packet;
+struct hpsb_host;
-/*
- * Get and free transaction labels.
- */
int hpsb_get_tlabel(struct hpsb_packet *packet);
void hpsb_free_tlabel(struct hpsb_packet *packet);
-
struct hpsb_packet *hpsb_make_readpacket(struct hpsb_host *host, nodeid_t node,
u64 addr, size_t length);
struct hpsb_packet *hpsb_make_lockpacket(struct hpsb_host *host, nodeid_t node,
- u64 addr, int extcode, quadlet_t *data,
+ u64 addr, int extcode, quadlet_t *data,
quadlet_t arg);
-struct hpsb_packet *hpsb_make_lock64packet(struct hpsb_host *host, nodeid_t node,
- u64 addr, int extcode, octlet_t *data,
- octlet_t arg);
-struct hpsb_packet *hpsb_make_phypacket(struct hpsb_host *host,
- quadlet_t data) ;
-struct hpsb_packet *hpsb_make_isopacket(struct hpsb_host *host,
- int length, int channel,
- int tag, int sync);
-struct hpsb_packet *hpsb_make_writepacket (struct hpsb_host *host, nodeid_t node,
- u64 addr, quadlet_t *buffer, size_t length);
+struct hpsb_packet *hpsb_make_lock64packet(struct hpsb_host *host,
+ nodeid_t node, u64 addr, int extcode,
+ octlet_t *data, octlet_t arg);
+struct hpsb_packet *hpsb_make_phypacket(struct hpsb_host *host, quadlet_t data);
+struct hpsb_packet *hpsb_make_isopacket(struct hpsb_host *host, int length,
+ int channel, int tag, int sync);
+struct hpsb_packet *hpsb_make_writepacket(struct hpsb_host *host,
+ nodeid_t node, u64 addr,
+ quadlet_t *buffer, size_t length);
struct hpsb_packet *hpsb_make_streampacket(struct hpsb_host *host, u8 *buffer,
- int length, int channel, int tag, int sync);
+ int length, int channel, int tag,
+ int sync);
/*
* hpsb_packet_success - Make sense of the ack and reply codes and
*/
int hpsb_packet_success(struct hpsb_packet *packet);
-
/*
- * The generic read, write and lock functions. All recognize the local node ID
+ * The generic read and write functions. All recognize the local node ID
* and act accordingly. Read and write automatically use quadlet commands if
* length == 4 and and block commands otherwise (however, they do not yet
* support lengths that are not a multiple of 4). You must explicitly specifiy
int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation,
u64 addr, quadlet_t *buffer, size_t length);
+#ifdef HPSB_DEBUG_TLABELS
+extern spinlock_t hpsb_tlabel_lock;
+#endif
+
#endif /* _IEEE1394_TRANSACTIONS_H */
-
#ifndef _IEEE1394_TYPES_H
#define _IEEE1394_TYPES_H
#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
#include <linux/string.h>
-
-#include <asm/semaphore.h>
+#include <linux/types.h>
#include <asm/byteorder.h>
-
-/* Transaction Label handling */
-struct hpsb_tlabel_pool {
- DECLARE_BITMAP(pool, 64);
- spinlock_t lock;
- u8 next;
- u32 allocations;
- struct semaphore count;
-};
-
-#define HPSB_TPOOL_INIT(_tp) \
-do { \
- bitmap_zero((_tp)->pool, 64); \
- spin_lock_init(&(_tp)->lock); \
- (_tp)->next = 0; \
- (_tp)->allocations = 0; \
- sema_init(&(_tp)->count, 63); \
-} while (0)
-
-
typedef u32 quadlet_t;
typedef u64 octlet_t;
typedef u16 nodeid_t;
#define NODE_BUS_ARGS(__host, __nodeid) \
__host->id, NODEID_TO_NODE(__nodeid), NODEID_TO_BUS(__nodeid)
-#define HPSB_PRINT(level, fmt, args...) printk(level "ieee1394: " fmt "\n" , ## args)
+#define HPSB_PRINT(level, fmt, args...) \
+ printk(level "ieee1394: " fmt "\n" , ## args)
-#define HPSB_DEBUG(fmt, args...) HPSB_PRINT(KERN_DEBUG, fmt , ## args)
-#define HPSB_INFO(fmt, args...) HPSB_PRINT(KERN_INFO, fmt , ## args)
-#define HPSB_NOTICE(fmt, args...) HPSB_PRINT(KERN_NOTICE, fmt , ## args)
-#define HPSB_WARN(fmt, args...) HPSB_PRINT(KERN_WARNING, fmt , ## args)
-#define HPSB_ERR(fmt, args...) HPSB_PRINT(KERN_ERR, fmt , ## args)
+#define HPSB_DEBUG(fmt, args...) HPSB_PRINT(KERN_DEBUG, fmt , ## args)
+#define HPSB_INFO(fmt, args...) HPSB_PRINT(KERN_INFO, fmt , ## args)
+#define HPSB_NOTICE(fmt, args...) HPSB_PRINT(KERN_NOTICE, fmt , ## args)
+#define HPSB_WARN(fmt, args...) HPSB_PRINT(KERN_WARNING, fmt , ## args)
+#define HPSB_ERR(fmt, args...) HPSB_PRINT(KERN_ERR, fmt , ## args)
#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
-#define HPSB_VERBOSE(fmt, args...) HPSB_PRINT(KERN_DEBUG, fmt , ## args)
+#define HPSB_VERBOSE(fmt, args...) HPSB_PRINT(KERN_DEBUG, fmt , ## args)
+#define HPSB_DEBUG_TLABELS
#else
-#define HPSB_VERBOSE(fmt, args...)
+#define HPSB_VERBOSE(fmt, args...) do {} while (0)
#endif
-#define HPSB_PANIC(fmt, args...) panic("ieee1394: " fmt "\n" , ## args)
-
-#define HPSB_TRACE() HPSB_PRINT(KERN_INFO, "TRACE - %s, %s(), line %d", __FILE__, __FUNCTION__, __LINE__)
-
-
#ifdef __BIG_ENDIAN
-static __inline__ void *memcpy_le32(u32 *dest, const u32 *__src, size_t count)
+static inline void *memcpy_le32(u32 *dest, const u32 *__src, size_t count)
{
- void *tmp = dest;
+ void *tmp = dest;
u32 *src = (u32 *)__src;
- count /= 4;
-
- while (count--) {
- *dest++ = swab32p(src++);
- }
-
- return tmp;
+ count /= 4;
+ while (count--)
+ *dest++ = swab32p(src++);
+ return tmp;
}
#else
static __inline__ void *memcpy_le32(u32 *dest, const u32 *src, size_t count)
{
- return memcpy(dest, src, count);
+ return memcpy(dest, src, count);
}
#endif /* __BIG_ENDIAN */
* directory of the kernel sources for details.
*/
-#include <linux/slab.h>
+#include <linux/pci.h>
#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "hosts.h"
#include "iso.h"
void hpsb_iso_stop(struct hpsb_iso *iso)
#ifndef IEEE1394_ISO_H
#define IEEE1394_ISO_H
-#include "hosts.h"
+#include <linux/spinlock_types.h>
+#include <asm/atomic.h>
+#include <asm/types.h>
+
#include "dma.h"
-/* high-level ISO interface */
+struct hpsb_host;
-/* This API sends and receives isochronous packets on a large,
- virtually-contiguous kernel memory buffer. The buffer may be mapped
- into a user-space process for zero-copy transmission and reception.
+/* high-level ISO interface */
- There are no explicit boundaries between packets in the buffer. A
- packet may be transmitted or received at any location. However,
- low-level drivers may impose certain restrictions on alignment or
- size of packets. (e.g. in OHCI no packet may cross a page boundary,
- and packets should be quadlet-aligned)
-*/
+/*
+ * This API sends and receives isochronous packets on a large,
+ * virtually-contiguous kernel memory buffer. The buffer may be mapped
+ * into a user-space process for zero-copy transmission and reception.
+ *
+ * There are no explicit boundaries between packets in the buffer. A
+ * packet may be transmitted or received at any location. However,
+ * low-level drivers may impose certain restrictions on alignment or
+ * size of packets. (e.g. in OHCI no packet may cross a page boundary,
+ * and packets should be quadlet-aligned)
+ */
/* Packet descriptor - the API maintains a ring buffer of these packet
- descriptors in kernel memory (hpsb_iso.infos[]). */
-
+ * descriptors in kernel memory (hpsb_iso.infos[]). */
struct hpsb_iso_packet_info {
/* offset of data payload relative to the first byte of the buffer */
__u32 offset;
- /* length of the data payload, in bytes (not including the isochronous header) */
+ /* length of the data payload, in bytes (not including the isochronous
+ * header) */
__u16 len;
- /* (recv only) the cycle number (mod 8000) on which the packet was received */
+ /* (recv only) the cycle number (mod 8000) on which the packet was
+ * received */
__u16 cycle;
/* (recv only) channel on which the packet was received */
__u8 tag;
__u8 sy;
- /*
- * length in bytes of the packet including header/trailer.
- * MUST be at structure end, since the first part of this structure is also
- * defined in raw1394.h (i.e. struct raw1394_iso_packet_info), is copied to
- * userspace and is accessed there through libraw1394.
- */
+ /* length in bytes of the packet including header/trailer.
+ * MUST be at structure end, since the first part of this structure is
+ * also defined in raw1394.h (i.e. struct raw1394_iso_packet_info), is
+ * copied to userspace and is accessed there through libraw1394. */
__u16 total_len;
};
void *hostdata;
/* a function to be called (from interrupt context) after
- outgoing packets have been sent, or incoming packets have
- arrived */
+ * outgoing packets have been sent, or incoming packets have
+ * arrived */
void (*callback)(struct hpsb_iso*);
/* wait for buffer space */
/* greatest # of packets between interrupts - controls
- the maximum latency of the buffer */
+ * the maximum latency of the buffer */
int irq_interval;
/* the buffer for packet data payloads */
int pkt_dma;
/* how many packets, starting at first_packet:
- (transmit) are ready to be filled with data
- (receive) contain received data */
+ * (transmit) are ready to be filled with data
+ * (receive) contain received data */
int n_ready_packets;
/* how many times the buffer has overflowed or underflowed */
int start_cycle;
/* cycle at which next packet will be transmitted,
- -1 if not known */
+ * -1 if not known */
int xmit_cycle;
/* ringbuffer of packet descriptors in regular kernel memory
int hpsb_iso_recv_set_channel_mask(struct hpsb_iso *iso, u64 mask);
/* start/stop DMA */
-int hpsb_iso_xmit_start(struct hpsb_iso *iso, int start_on_cycle, int prebuffer);
-int hpsb_iso_recv_start(struct hpsb_iso *iso, int start_on_cycle, int tag_mask, int sync);
+int hpsb_iso_xmit_start(struct hpsb_iso *iso, int start_on_cycle,
+ int prebuffer);
+int hpsb_iso_recv_start(struct hpsb_iso *iso, int start_on_cycle,
+ int tag_mask, int sync);
void hpsb_iso_stop(struct hpsb_iso *iso);
/* deallocate buffer and DMA context */
void hpsb_iso_shutdown(struct hpsb_iso *iso);
-/* queue a packet for transmission. 'offset' is relative to the beginning of the
- DMA buffer, where the packet's data payload should already have been placed */
-int hpsb_iso_xmit_queue_packet(struct hpsb_iso *iso, u32 offset, u16 len, u8 tag, u8 sy);
+/* queue a packet for transmission.
+ * 'offset' is relative to the beginning of the DMA buffer, where the packet's
+ * data payload should already have been placed. */
+int hpsb_iso_xmit_queue_packet(struct hpsb_iso *iso, u32 offset, u16 len,
+ u8 tag, u8 sy);
/* wait until all queued packets have been transmitted to the bus */
int hpsb_iso_xmit_sync(struct hpsb_iso *iso);
/* N packets have been read out of the buffer, re-use the buffer space */
-int hpsb_iso_recv_release_packets(struct hpsb_iso *recv, unsigned int n_packets);
+int hpsb_iso_recv_release_packets(struct hpsb_iso *recv,
+ unsigned int n_packets);
/* check for arrival of new packets immediately (even if irq_interval
- has not yet been reached) */
+ * has not yet been reached) */
int hpsb_iso_recv_flush(struct hpsb_iso *iso);
/* returns # of packets ready to send or receive */
/* the following are callbacks available to low-level drivers */
/* call after a packet has been transmitted to the bus (interrupt context is OK)
- 'cycle' is the _exact_ cycle the packet was sent on
- 'error' should be non-zero if some sort of error occurred when sending the packet
-*/
+ * 'cycle' is the _exact_ cycle the packet was sent on
+ * 'error' should be non-zero if some sort of error occurred when sending the
+ * packet */
void hpsb_iso_packet_sent(struct hpsb_iso *iso, int cycle, int error);
/* call after a packet has been received (interrupt context OK) */
void hpsb_iso_packet_received(struct hpsb_iso *iso, u32 offset, u16 len,
- u16 total_len, u16 cycle, u8 channel, u8 tag, u8 sy);
+ u16 total_len, u16 cycle, u8 channel, u8 tag,
+ u8 sy);
/* call to wake waiting processes after buffer space has opened up. */
void hpsb_iso_wake(struct hpsb_iso *iso);
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/kmod.h>
-#include <linux/completion.h>
#include <linux/delay.h>
-#include <linux/pci.h>
+#include <linux/kthread.h>
#include <linux/moduleparam.h>
#include <asm/atomic.h>
-#include "ieee1394_types.h"
+#include "csr.h"
+#include "highlevel.h"
+#include "hosts.h"
#include "ieee1394.h"
#include "ieee1394_core.h"
-#include "hosts.h"
+#include "ieee1394_hotplug.h"
+#include "ieee1394_types.h"
#include "ieee1394_transactions.h"
-#include "highlevel.h"
-#include "csr.h"
#include "nodemgr.h"
static int ignore_drivers;
-module_param(ignore_drivers, int, 0444);
+module_param(ignore_drivers, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ignore_drivers, "Disable automatic probing for drivers.");
struct nodemgr_csr_info {
u8 i, *speed, old_speed, good_speed;
int ret;
- speed = ci->host->speed + NODEID_TO_NODE(ci->nodeid);
+ speed = &(ci->host->speed[NODEID_TO_NODE(ci->nodeid)]);
old_speed = *speed;
good_speed = IEEE1394_SPEED_MAX + 1;
* but now we are much simpler because of the LDM.
*/
-static DECLARE_MUTEX(nodemgr_serialize);
+static DEFINE_MUTEX(nodemgr_serialize);
struct host_info {
struct hpsb_host *host;
struct list_head list;
- struct completion exited;
- struct semaphore reset_sem;
- int pid;
- char daemon_name[15];
- int kill_me;
+ struct task_struct *thread;
};
static int nodemgr_bus_match(struct device * dev, struct device_driver * drv);
static DEVICE_ATTR(bus_options,S_IRUGO,fw_show_ne_bus_options,NULL);
-/* tlabels_free, tlabels_allocations, tlabels_mask are read non-atomically
- * here, therefore displayed values may be occasionally wrong. */
-static ssize_t fw_show_ne_tlabels_free(struct device *dev, struct device_attribute *attr, char *buf)
+#ifdef HPSB_DEBUG_TLABELS
+static ssize_t fw_show_ne_tlabels_free(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct node_entry *ne = container_of(dev, struct node_entry, device);
- return sprintf(buf, "%d\n", 64 - bitmap_weight(ne->tpool->pool, 64));
-}
-static DEVICE_ATTR(tlabels_free,S_IRUGO,fw_show_ne_tlabels_free,NULL);
+ unsigned long flags;
+ unsigned long *tp = ne->host->tl_pool[NODEID_TO_NODE(ne->nodeid)].map;
+ int tf;
+ spin_lock_irqsave(&hpsb_tlabel_lock, flags);
+ tf = 64 - bitmap_weight(tp, 64);
+ spin_unlock_irqrestore(&hpsb_tlabel_lock, flags);
-static ssize_t fw_show_ne_tlabels_allocations(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct node_entry *ne = container_of(dev, struct node_entry, device);
- return sprintf(buf, "%u\n", ne->tpool->allocations);
+ return sprintf(buf, "%d\n", tf);
}
-static DEVICE_ATTR(tlabels_allocations,S_IRUGO,fw_show_ne_tlabels_allocations,NULL);
+static DEVICE_ATTR(tlabels_free,S_IRUGO,fw_show_ne_tlabels_free,NULL);
-static ssize_t fw_show_ne_tlabels_mask(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t fw_show_ne_tlabels_mask(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct node_entry *ne = container_of(dev, struct node_entry, device);
+ unsigned long flags;
+ unsigned long *tp = ne->host->tl_pool[NODEID_TO_NODE(ne->nodeid)].map;
+ u64 tm;
+
+ spin_lock_irqsave(&hpsb_tlabel_lock, flags);
#if (BITS_PER_LONG <= 32)
- return sprintf(buf, "0x%08lx%08lx\n", ne->tpool->pool[0], ne->tpool->pool[1]);
+ tm = ((u64)tp[0] << 32) + tp[1];
#else
- return sprintf(buf, "0x%016lx\n", ne->tpool->pool[0]);
+ tm = tp[0];
#endif
+ spin_unlock_irqrestore(&hpsb_tlabel_lock, flags);
+
+ return sprintf(buf, "0x%016llx\n", tm);
}
static DEVICE_ATTR(tlabels_mask, S_IRUGO, fw_show_ne_tlabels_mask, NULL);
+#endif /* HPSB_DEBUG_TLABELS */
static ssize_t fw_set_ignore_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
}
static BUS_ATTR(destroy_node, S_IWUSR | S_IRUGO, fw_get_destroy_node, fw_set_destroy_node);
-static int nodemgr_rescan_bus_thread(void *__unused)
-{
- /* No userlevel access needed */
- daemonize("kfwrescan");
-
- bus_rescan_devices(&ieee1394_bus_type);
-
- return 0;
-}
static ssize_t fw_set_rescan(struct bus_type *bus, const char *buf, size_t count)
{
- int state = simple_strtoul(buf, NULL, 10);
-
- /* Don't wait for this, or care about errors. Root could do
- * something stupid and spawn this a lot of times, but that's
- * root's fault. */
- if (state == 1)
- kernel_thread(nodemgr_rescan_bus_thread, NULL, CLONE_KERNEL);
-
+ if (simple_strtoul(buf, NULL, 10) == 1)
+ bus_rescan_devices(&ieee1394_bus_type);
return count;
}
static ssize_t fw_get_rescan(struct bus_type *bus, char *buf)
&dev_attr_ne_vendor_id,
&dev_attr_ne_nodeid,
&dev_attr_bus_options,
+#ifdef HPSB_DEBUG_TLABELS
&dev_attr_tlabels_free,
- &dev_attr_tlabels_allocations,
&dev_attr_tlabels_mask,
+#endif
};
if (!ne)
return NULL;
- ne->tpool = &host->tpool[nodeid & NODE_MASK];
-
ne->host = host;
ne->nodeid = nodeid;
ne->generation = generation;
octlet_t guid;
struct csr1212_csr *csr;
struct nodemgr_csr_info *ci;
+ u8 *speed;
ci = kmalloc(sizeof(*ci), GFP_KERNEL);
if (!ci)
ci->host = host;
ci->nodeid = nodeid;
ci->generation = generation;
- ci->speed_unverified =
- host->speed[NODEID_TO_NODE(nodeid)] > IEEE1394_SPEED_100;
+
+ /* Prepare for speed probe which occurs when reading the ROM */
+ speed = &(host->speed[NODEID_TO_NODE(nodeid)]);
+ if (*speed > host->csr.lnk_spd)
+ *speed = host->csr.lnk_spd;
+ ci->speed_unverified = *speed > IEEE1394_SPEED_100;
/* We need to detect when the ConfigROM's generation has changed,
* so we only update the node's info when it needs to be. */
nodemgr_create_node(guid, csr, hi, nodeid, generation);
else
nodemgr_update_node(ne, csr, hi, nodeid, generation);
-
- return;
}
}
+/* Caller needs to hold nodemgr_ud_class.subsys.rwsem as reader. */
static void nodemgr_suspend_ne(struct node_entry *ne)
{
struct class_device *cdev;
ne->in_limbo = 0;
device_remove_file(&ne->device, &dev_attr_ne_in_limbo);
+ down_read(&nodemgr_ud_class.subsys.rwsem);
down_read(&ne->device.bus->subsys.rwsem);
list_for_each_entry(cdev, &nodemgr_ud_class.children, node) {
ud = container_of(cdev, struct unit_directory, class_dev);
ud->device.driver->resume(&ud->device);
}
up_read(&ne->device.bus->subsys.rwsem);
+ up_read(&nodemgr_ud_class.subsys.rwsem);
HPSB_DEBUG("Node resumed: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]",
NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid);
}
+/* Caller needs to hold nodemgr_ud_class.subsys.rwsem as reader. */
static void nodemgr_update_pdrv(struct node_entry *ne)
{
struct unit_directory *ud;
struct hpsb_protocol_driver *pdrv;
- struct class *class = &nodemgr_ud_class;
struct class_device *cdev;
- down_read(&class->subsys.rwsem);
- list_for_each_entry(cdev, &class->children, node) {
+ list_for_each_entry(cdev, &nodemgr_ud_class.children, node) {
ud = container_of(cdev, struct unit_directory, class_dev);
if (ud->ne != ne || !ud->device.driver)
continue;
up_write(&ud->device.bus->subsys.rwsem);
}
}
- up_read(&class->subsys.rwsem);
}
}
+/* Caller needs to hold nodemgr_ud_class.subsys.rwsem as reader because the
+ * calls to nodemgr_update_pdrv() and nodemgr_suspend_ne() here require it. */
static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int generation)
{
struct device *dev;
/* If we had a bus reset while we were scanning the bus, it is
* possible that we did not probe all nodes. In that case, we
* skip the clean up for now, since we could remove nodes that
- * were still on the bus. The bus reset increased hi->reset_sem,
- * so there's a bus scan pending which will do the clean up
- * eventually.
+ * were still on the bus. Another bus scan is pending which will
+ * do the clean up eventually.
*
* Now let's tell the bus to rescan our devices. This may seem
* like overhead, but the driver-model core will only scan a
{
struct host_info *hi = (struct host_info *)__hi;
struct hpsb_host *host = hi->host;
- int reset_cycles = 0;
-
- /* No userlevel access needed */
- daemonize(hi->daemon_name);
+ unsigned int g, generation = get_hpsb_generation(host) - 1;
+ int i, reset_cycles = 0;
/* Setup our device-model entries */
nodemgr_create_host_dev_files(host);
- /* Sit and wait for a signal to probe the nodes on the bus. This
- * happens when we get a bus reset. */
- while (1) {
- unsigned int generation = 0;
- int i;
+ for (;;) {
+ /* Sleep until next bus reset */
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (get_hpsb_generation(host) == generation)
+ schedule();
+ __set_current_state(TASK_RUNNING);
+
+ /* Thread may have been woken up to freeze or to exit */
+ if (try_to_freeze())
+ continue;
+ if (kthread_should_stop())
+ goto exit;
- if (down_interruptible(&hi->reset_sem) ||
- down_interruptible(&nodemgr_serialize)) {
+ if (mutex_lock_interruptible(&nodemgr_serialize)) {
if (try_to_freeze())
continue;
- printk("NodeMgr: received unexpected signal?!\n" );
- break;
- }
-
- if (hi->kill_me) {
- up(&nodemgr_serialize);
- break;
+ goto exit;
}
/* Pause for 1/4 second in 1/16 second intervals,
* to make sure things settle down. */
+ g = get_hpsb_generation(host);
for (i = 0; i < 4 ; i++) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (msleep_interruptible(63)) {
- up(&nodemgr_serialize);
- goto caught_signal;
- }
+ if (msleep_interruptible(63) || kthread_should_stop())
+ goto unlock_exit;
/* Now get the generation in which the node ID's we collect
* are valid. During the bus scan we will use this generation
/* If we get a reset before we are done waiting, then
* start the the waiting over again */
- while (!down_trylock(&hi->reset_sem))
- i = 0;
-
- /* Check the kill_me again */
- if (hi->kill_me) {
- up(&nodemgr_serialize);
- goto caught_signal;
- }
+ if (generation != g)
+ g = generation, i = 0;
}
if (!nodemgr_check_irm_capability(host, reset_cycles) ||
!nodemgr_do_irm_duties(host, reset_cycles)) {
reset_cycles++;
- up(&nodemgr_serialize);
+ mutex_unlock(&nodemgr_serialize);
continue;
}
reset_cycles = 0;
/* Update some of our sysfs symlinks */
nodemgr_update_host_dev_links(host);
- up(&nodemgr_serialize);
+ mutex_unlock(&nodemgr_serialize);
}
-
-caught_signal:
+unlock_exit:
+ mutex_unlock(&nodemgr_serialize);
+exit:
HPSB_VERBOSE("NodeMgr: Exiting thread");
-
- complete_and_exit(&hi->exited, 0);
+ return 0;
}
int nodemgr_for_each_host(void *__data, int (*cb)(struct hpsb_host *, void *))
struct host_info *hi;
hi = hpsb_create_hostinfo(&nodemgr_highlevel, host, sizeof(*hi));
-
if (!hi) {
- HPSB_ERR ("NodeMgr: out of memory in add host");
+ HPSB_ERR("NodeMgr: out of memory in add host");
return;
}
-
hi->host = host;
- init_completion(&hi->exited);
- sema_init(&hi->reset_sem, 0);
-
- sprintf(hi->daemon_name, "knodemgrd_%d", host->id);
-
- hi->pid = kernel_thread(nodemgr_host_thread, hi, CLONE_KERNEL);
-
- if (hi->pid < 0) {
- HPSB_ERR ("NodeMgr: failed to start %s thread for %s",
- hi->daemon_name, host->driver->name);
+ hi->thread = kthread_run(nodemgr_host_thread, hi, "knodemgrd_%d",
+ host->id);
+ if (IS_ERR(hi->thread)) {
+ HPSB_ERR("NodeMgr: cannot start thread for host %d", host->id);
hpsb_destroy_hostinfo(&nodemgr_highlevel, host);
- return;
}
-
- return;
}
static void nodemgr_host_reset(struct hpsb_host *host)
{
struct host_info *hi = hpsb_get_hostinfo(&nodemgr_highlevel, host);
- if (hi != NULL) {
- HPSB_VERBOSE("NodeMgr: Processing host reset for %s", hi->daemon_name);
- up(&hi->reset_sem);
- } else
- HPSB_ERR ("NodeMgr: could not process reset of unused host");
-
- return;
+ if (hi) {
+ HPSB_VERBOSE("NodeMgr: Processing reset for host %d", host->id);
+ wake_up_process(hi->thread);
+ }
}
static void nodemgr_remove_host(struct hpsb_host *host)
struct host_info *hi = hpsb_get_hostinfo(&nodemgr_highlevel, host);
if (hi) {
- if (hi->pid >= 0) {
- hi->kill_me = 1;
- mb();
- up(&hi->reset_sem);
- wait_for_completion(&hi->exited);
- nodemgr_remove_host_dev(&host->device);
- }
- } else
- HPSB_ERR("NodeMgr: host %s does not exist, cannot remove",
- host->driver->name);
-
- return;
+ kthread_stop(hi->thread);
+ nodemgr_remove_host_dev(&host->device);
+ }
}
static struct hpsb_highlevel nodemgr_highlevel = {
#define _IEEE1394_NODEMGR_H
#include <linux/device.h>
-#include "csr1212.h"
+#include <asm/types.h>
+
#include "ieee1394_core.h"
-#include "ieee1394_hotplug.h"
+#include "ieee1394_types.h"
+
+struct csr1212_csr;
+struct csr1212_keyval;
+struct hpsb_host;
+struct ieee1394_device_id;
/* '1' '3' '9' '4' in ASCII */
#define IEEE1394_BUSID_MAGIC __constant_cpu_to_be32(0x31333934)
u16 max_rec; /* Maximum packet size node can receive */
};
-
#define UNIT_DIRECTORY_VENDOR_ID 0x01
#define UNIT_DIRECTORY_MODEL_ID 0x02
#define UNIT_DIRECTORY_SPECIFIER_ID 0x04
* unit directory for each of these protocols.
*/
struct unit_directory {
- struct node_entry *ne; /* The node which this directory belongs to */
- octlet_t address; /* Address of the unit directory on the node */
+ struct node_entry *ne; /* The node which this directory belongs to */
+ octlet_t address; /* Address of the unit directory on the node */
u8 flags; /* Indicates which entries were read */
quadlet_t vendor_id;
int length; /* Number of quadlets */
struct device device;
-
struct class_device class_dev;
struct csr1212_keyval *ud_kv;
- u32 lun; /* logical unit number immediate value */
+ u32 lun; /* logical unit number immediate value */
};
struct node_entry {
const char *vendor_oui;
u32 capabilities;
- struct hpsb_tlabel_pool *tpool;
struct device device;
-
struct class_device class_dev;
/* Means this node is not attached anymore */
/*
* This will fill in the given, pre-initialised hpsb_packet with the current
* information from the node entry (host, node ID, generation number). It will
- * return false if the node owning the GUID is not accessible (and not modify the
- * hpsb_packet) and return true otherwise.
+ * return false if the node owning the GUID is not accessible (and not modify
+ * the hpsb_packet) and return true otherwise.
*
* Note that packet sending may still fail in hpsb_send_packet if a bus reset
* happens while you are trying to set up the packet (due to obsolete generation
int hpsb_node_lock(struct node_entry *ne, u64 addr,
int extcode, quadlet_t *data, quadlet_t arg);
-
/* Iterate the hosts, calling a given function with supplied data for each
* host. */
int nodemgr_for_each_host(void *__data, int (*cb)(struct hpsb_host *, void *));
-
int init_ieee1394_nodemgr(void);
void cleanup_ieee1394_nodemgr(void);
-
/* The template for a host device */
extern struct device nodemgr_dev_template_host;
#define DBGMSG(fmt, args...) \
printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args)
#else
-#define DBGMSG(fmt, args...)
+#define DBGMSG(fmt, args...) do {} while (0)
#endif
#ifdef CONFIG_IEEE1394_OHCI_DMA_DEBUG
--global_outstanding_dmas, ## args)
static int global_outstanding_dmas = 0;
#else
-#define OHCI_DMA_ALLOC(fmt, args...)
-#define OHCI_DMA_FREE(fmt, args...)
+#define OHCI_DMA_ALLOC(fmt, args...) do {} while (0)
+#define OHCI_DMA_FREE(fmt, args...) do {} while (0)
#endif
/* print general (card independent) information */
static void ohci1394_pci_remove(struct pci_dev *pdev);
#ifndef __LITTLE_ENDIAN
-static unsigned hdr_sizes[] =
-{
+const static size_t hdr_sizes[] = {
3, /* TCODE_WRITEQ */
4, /* TCODE_WRITEB */
3, /* TCODE_WRITE_RESPONSE */
- 0, /* ??? */
+ 0, /* reserved */
3, /* TCODE_READQ */
4, /* TCODE_READB */
3, /* TCODE_READQ_RESPONSE */
4, /* TCODE_READB_RESPONSE */
- 1, /* TCODE_CYCLE_START (???) */
+ 1, /* TCODE_CYCLE_START */
4, /* TCODE_LOCK_REQUEST */
2, /* TCODE_ISO_DATA */
4, /* TCODE_LOCK_RESPONSE */
+ /* rest is reserved or link-internal */
};
-/* Swap headers */
-static inline void packet_swab(quadlet_t *data, int tcode)
+static inline void header_le32_to_cpu(quadlet_t *data, unsigned char tcode)
{
- size_t size = hdr_sizes[tcode];
+ size_t size;
- if (tcode > TCODE_LOCK_RESPONSE || hdr_sizes[tcode] == 0)
+ if (unlikely(tcode >= ARRAY_SIZE(hdr_sizes)))
return;
+ size = hdr_sizes[tcode];
while (size--)
- data[size] = swab32(data[size]);
+ data[size] = le32_to_cpu(data[size]);
}
#else
-/* Don't waste cycles on same sex byte swaps */
-#define packet_swab(w,x)
+#define header_le32_to_cpu(w,x) do {} while (0)
#endif /* !LITTLE_ENDIAN */
/***********************************
d->prg_cpu[idx]->data[2] = packet->header[2];
d->prg_cpu[idx]->data[3] = packet->header[3];
}
- packet_swab(d->prg_cpu[idx]->data, packet->tcode);
+ header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode);
}
if (packet->data_size) { /* block transmit */
d->prg_cpu[idx]->data[0] = packet->speed_code<<16 |
(packet->header[0] & 0xFFFF);
d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000;
- packet_swab(d->prg_cpu[idx]->data, packet->tcode);
+ header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode);
d->prg_cpu[idx]->begin.control =
cpu_to_le32(DMA_CTL_OUTPUT_MORE |
* Determine the length of a packet in the buffer
* Optimization suggested by Pascal Drolet <pascal.drolet@informission.ca>
*/
-static __inline__ int packet_length(struct dma_rcv_ctx *d, int idx, quadlet_t *buf_ptr,
- int offset, unsigned char tcode, int noswap)
+static inline int packet_length(struct dma_rcv_ctx *d, int idx,
+ quadlet_t *buf_ptr, int offset,
+ unsigned char tcode, int noswap)
{
int length = -1;
* bus reset. We always ignore it. */
if (tcode != OHCI1394_TCODE_PHY) {
if (!ohci->no_swap_incoming)
- packet_swab(d->spb, tcode);
+ header_le32_to_cpu(d->spb, tcode);
DBGMSG("Packet received from node"
" %d ack=0x%02X spd=%d tcode=0x%X"
" length=%d ctx=%d tlabel=%d",
(cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f,
(cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>21)&0x3,
tcode, length, d->ctx,
- (cond_le32_to_cpu(d->spb[0], ohci->no_swap_incoming)>>10)&0x3f);
+ (d->spb[0]>>10)&0x3f);
ack = (((cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f)
== 0x11) ? 1 : 0;
put_device(dev);
}
-
+#ifdef CONFIG_PM
static int ohci1394_pci_resume (struct pci_dev *pdev)
{
+/* PowerMac resume code comes first */
#ifdef CONFIG_PPC_PMAC
if (machine_is(powermac)) {
struct device_node *of_node;
}
#endif /* CONFIG_PPC_PMAC */
+ pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- pci_enable_device(pdev);
-
- return 0;
+ return pci_enable_device(pdev);
}
-
static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
- pci_save_state(pdev);
+ int err;
+
+ err = pci_save_state(pdev);
+ if (err)
+ goto out;
+ err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ if (err)
+ goto out;
+/* PowerMac suspend code comes last */
#ifdef CONFIG_PPC_PMAC
if (machine_is(powermac)) {
struct device_node *of_node;
if (of_node)
pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0);
}
-#endif
-
- return 0;
+#endif /* CONFIG_PPC_PMAC */
+out:
+ return err;
}
-
+#endif /* CONFIG_PM */
#define PCI_CLASS_FIREWIRE_OHCI ((PCI_CLASS_SERIAL_FIREWIRE << 8) | 0x10)
.id_table = ohci1394_pci_tbl,
.probe = ohci1394_pci_probe,
.remove = ohci1394_pci_remove,
+#ifdef CONFIG_PM
.resume = ohci1394_pci_resume,
.suspend = ohci1394_pci_suspend,
+#endif
};
/***********************************
return pci_register_driver(&ohci1394_pci_driver);
}
-module_init(ohci1394_init);
+/* Register before most other device drivers.
+ * Useful for remote debugging via physical DMA, e.g. using firescope. */
+fs_initcall(ohci1394_init);
module_exit(ohci1394_cleanup);
struct list_head req_pending;
struct list_head req_complete;
- struct semaphore complete_sem;
spinlock_t reqlists_lock;
- wait_queue_head_t poll_wait_complete;
+ wait_queue_head_t wait_complete;
struct list_head addr_list;
#include <linux/compat.h>
#include "csr1212.h"
+#include "highlevel.h"
+#include "hosts.h"
#include "ieee1394.h"
-#include "ieee1394_types.h"
#include "ieee1394_core.h"
-#include "nodemgr.h"
-#include "hosts.h"
-#include "highlevel.h"
-#include "iso.h"
+#include "ieee1394_hotplug.h"
#include "ieee1394_transactions.h"
+#include "ieee1394_types.h"
+#include "iso.h"
+#include "nodemgr.h"
#include "raw1394.h"
#include "raw1394-private.h"
#define DBGMSG(fmt, args...) \
printk(KERN_INFO "raw1394:" fmt "\n" , ## args)
#else
-#define DBGMSG(fmt, args...)
+#define DBGMSG(fmt, args...) do {} while (0)
#endif
static LIST_HEAD(host_info_list);
static void __queue_complete_req(struct pending_request *req)
{
struct file_info *fi = req->file_info;
- list_move_tail(&req->list, &fi->req_complete);
- up(&fi->complete_sem);
- wake_up_interruptible(&fi->poll_wait_complete);
+ list_move_tail(&req->list, &fi->req_complete);
+ wake_up(&fi->wait_complete);
}
static void queue_complete_req(struct pending_request *req)
#endif
+/* get next completed request (caller must hold fi->reqlists_lock) */
+static inline struct pending_request *__next_complete_req(struct file_info *fi)
+{
+ struct list_head *lh;
+ struct pending_request *req = NULL;
+
+ if (!list_empty(&fi->req_complete)) {
+ lh = fi->req_complete.next;
+ list_del(lh);
+ req = list_entry(lh, struct pending_request, list);
+ }
+ return req;
+}
+
+/* atomically get next completed request */
+static struct pending_request *next_complete_req(struct file_info *fi)
+{
+ unsigned long flags;
+ struct pending_request *req;
+
+ spin_lock_irqsave(&fi->reqlists_lock, flags);
+ req = __next_complete_req(fi);
+ spin_unlock_irqrestore(&fi->reqlists_lock, flags);
+ return req;
+}
static ssize_t raw1394_read(struct file *file, char __user * buffer,
size_t count, loff_t * offset_is_ignored)
{
- unsigned long flags;
struct file_info *fi = (struct file_info *)file->private_data;
- struct list_head *lh;
struct pending_request *req;
ssize_t ret;
}
if (file->f_flags & O_NONBLOCK) {
- if (down_trylock(&fi->complete_sem)) {
+ if (!(req = next_complete_req(fi)))
return -EAGAIN;
- }
} else {
- if (down_interruptible(&fi->complete_sem)) {
+ /*
+ * NB: We call the macro wait_event_interruptible() with a
+ * condition argument with side effect. This is only possible
+ * because the side effect does not occur until the condition
+ * became true, and wait_event_interruptible() won't evaluate
+ * the condition again after that.
+ */
+ if (wait_event_interruptible(fi->wait_complete,
+ (req = next_complete_req(fi))))
return -ERESTARTSYS;
- }
}
- spin_lock_irqsave(&fi->reqlists_lock, flags);
- lh = fi->req_complete.next;
- list_del(lh);
- spin_unlock_irqrestore(&fi->reqlists_lock, flags);
-
- req = list_entry(lh, struct pending_request, list);
-
if (req->req.length) {
if (copy_to_user(int2ptr(req->req.recvb), req->data,
req->req.length)) {
addr->notification_options |= addr->client_transactions;
addr->recvb = req->req.recvb;
addr->rec_length = (u16) ((req->req.misc >> 16) & 0xFFFF);
+
spin_lock_irqsave(&host_info_lock, flags);
hi = find_host_info(fi->host);
same_host = 0;
}
if (same_host) {
/* addressrange occupied by same host */
+ spin_unlock_irqrestore(&host_info_lock, flags);
vfree(addr->addr_space_buffer);
kfree(addr);
- spin_unlock_irqrestore(&host_info_lock, flags);
return (-EALREADY);
}
/* another host with valid address-entry containing same addressrange */
}
}
}
+ spin_unlock_irqrestore(&host_info_lock, flags);
+
if (another_host) {
DBGMSG("another hosts entry is valid -> SUCCESS");
if (copy_to_user(int2ptr(req->req.recvb),
" address-range-entry is invalid -> EFAULT !!!\n");
vfree(addr->addr_space_buffer);
kfree(addr);
- spin_unlock_irqrestore(&host_info_lock, flags);
return (-EFAULT);
}
free_pending_request(req); /* immediate success or fail */
/* INSERT ENTRY */
+ spin_lock_irqsave(&host_info_lock, flags);
list_add_tail(&addr->addr_list, &fi->addr_list);
spin_unlock_irqrestore(&host_info_lock, flags);
return sizeof(struct raw1394_request);
req->req.address + req->req.length);
if (retval) {
/* INSERT ENTRY */
+ spin_lock_irqsave(&host_info_lock, flags);
list_add_tail(&addr->addr_list, &fi->addr_list);
+ spin_unlock_irqrestore(&host_info_lock, flags);
} else {
DBGMSG("arm_register failed errno: %d \n", retval);
vfree(addr->addr_space_buffer);
kfree(addr);
- spin_unlock_irqrestore(&host_info_lock, flags);
return (-EALREADY);
}
- spin_unlock_irqrestore(&host_info_lock, flags);
free_pending_request(req); /* immediate success or fail */
return sizeof(struct raw1394_request);
}
if (another_host) {
DBGMSG("delete entry from list -> success");
list_del(&addr->addr_list);
+ spin_unlock_irqrestore(&host_info_lock, flags);
vfree(addr->addr_space_buffer);
kfree(addr);
free_pending_request(req); /* immediate success or fail */
- spin_unlock_irqrestore(&host_info_lock, flags);
return sizeof(struct raw1394_request);
}
retval =
(arm_addr->end > req->req.address)) {
if (req->req.address + req->req.length <= arm_addr->end) {
offset = req->req.address - arm_addr->start;
+ spin_unlock_irqrestore(&host_info_lock, flags);
DBGMSG
("arm_get_buf copy_to_user( %08X, %p, %u )",
(u32) req->req.recvb,
arm_addr->addr_space_buffer + offset,
(u32) req->req.length);
-
if (copy_to_user
(int2ptr(req->req.recvb),
arm_addr->addr_space_buffer + offset,
- req->req.length)) {
- spin_unlock_irqrestore(&host_info_lock,
- flags);
+ req->req.length))
return (-EFAULT);
- }
- spin_unlock_irqrestore(&host_info_lock, flags);
/* We have to free the request, because we
* queue no response, and therefore nobody
* will free it. */
(arm_addr->end > req->req.address)) {
if (req->req.address + req->req.length <= arm_addr->end) {
offset = req->req.address - arm_addr->start;
+ spin_unlock_irqrestore(&host_info_lock, flags);
DBGMSG
("arm_set_buf copy_from_user( %p, %08X, %u )",
arm_addr->addr_space_buffer + offset,
(u32) req->req.sendb,
(u32) req->req.length);
-
if (copy_from_user
(arm_addr->addr_space_buffer + offset,
int2ptr(req->req.sendb),
- req->req.length)) {
- spin_unlock_irqrestore(&host_info_lock,
- flags);
+ req->req.length))
return (-EFAULT);
- }
- spin_unlock_irqrestore(&host_info_lock, flags);
- free_pending_request(req); /* we have to free the request, because we queue no response, and therefore nobody will free it */
+ /* We have to free the request, because we
+ * queue no response, and therefore nobody
+ * will free it. */
+ free_pending_request(req);
return sizeof(struct raw1394_request);
} else {
DBGMSG("arm_set_buf request exceeded mapping");
unsigned int mask = POLLOUT | POLLWRNORM;
unsigned long flags;
- poll_wait(file, &fi->poll_wait_complete, pt);
+ poll_wait(file, &fi->wait_complete, pt);
spin_lock_irqsave(&fi->reqlists_lock, flags);
if (!list_empty(&fi->req_complete)) {
fi->state = opened;
INIT_LIST_HEAD(&fi->req_pending);
INIT_LIST_HEAD(&fi->req_complete);
- sema_init(&fi->complete_sem, 0);
spin_lock_init(&fi->reqlists_lock);
- init_waitqueue_head(&fi->poll_wait_complete);
+ init_waitqueue_head(&fi->wait_complete);
INIT_LIST_HEAD(&fi->addr_list);
file->private_data = fi;
struct file_info *fi = file->private_data;
struct list_head *lh;
struct pending_request *req;
- int done = 0, i, fail = 0;
+ int i, fail;
int retval = 0;
struct list_head *entry;
struct arm_addr *addr = NULL;
"error(s) occurred \n");
}
- while (!done) {
+ for (;;) {
+ /* This locked section guarantees that neither
+ * complete nor pending requests exist once i!=0 */
spin_lock_irqsave(&fi->reqlists_lock, flags);
-
- while (!list_empty(&fi->req_complete)) {
- lh = fi->req_complete.next;
- list_del(lh);
-
- req = list_entry(lh, struct pending_request, list);
-
+ while ((req = __next_complete_req(fi)))
free_pending_request(req);
- }
-
- if (list_empty(&fi->req_pending))
- done = 1;
+ i = list_empty(&fi->req_pending);
spin_unlock_irqrestore(&fi->reqlists_lock, flags);
- if (!done)
- down_interruptible(&fi->complete_sem);
+ if (i)
+ break;
+ /*
+ * Sleep until more requests can be freed.
+ *
+ * NB: We call the macro wait_event() with a condition argument
+ * with side effect. This is only possible because the side
+ * effect does not occur until the condition became true, and
+ * wait_event() won't evaluate the condition again after that.
+ */
+ wait_event(fi->wait_complete, (req = next_complete_req(fi)));
+ free_pending_request(req);
}
/* Remove any sub-trees left by user space programs */
* but the code needs additional debugging.
*/
+#include <linux/blkdev.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/string.h>
-#include <linux/stringify.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/blkdev.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/wait.h>
-#include <asm/current.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
#include <asm/byteorder.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
+#include <asm/errno.h>
+#include <asm/param.h>
#include <asm/scatterlist.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
+#include <asm/io.h> /* for bus_to_virt */
+#endif
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include "csr1212.h"
+#include "highlevel.h"
+#include "hosts.h"
#include "ieee1394.h"
-#include "ieee1394_types.h"
#include "ieee1394_core.h"
-#include "nodemgr.h"
-#include "hosts.h"
-#include "highlevel.h"
+#include "ieee1394_hotplug.h"
#include "ieee1394_transactions.h"
+#include "ieee1394_types.h"
+#include "nodemgr.h"
#include "sbp2.h"
/*
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
-/* legacy parameter */
-static int force_inquiry_hack;
-module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
-
/*
* Export information about protocols/devices supported by this driver.
*/
#define outstanding_orb_incr global_outstanding_command_orbs++
#define outstanding_orb_decr global_outstanding_command_orbs--
#else
-#define SBP2_ORB_DEBUG(fmt, args...)
-#define outstanding_orb_incr
-#define outstanding_orb_decr
+#define SBP2_ORB_DEBUG(fmt, args...) do {} while (0)
+#define outstanding_orb_incr do {} while (0)
+#define outstanding_orb_decr do {} while (0)
#endif
#ifdef CONFIG_IEEE1394_SBP2_DEBUG_DMA
--global_outstanding_dmas, ## args)
static u32 global_outstanding_dmas = 0;
#else
-#define SBP2_DMA_ALLOC(fmt, args...)
-#define SBP2_DMA_FREE(fmt, args...)
+#define SBP2_DMA_ALLOC(fmt, args...) do {} while (0)
+#define SBP2_DMA_FREE(fmt, args...) do {} while (0)
#endif
#if CONFIG_IEEE1394_SBP2_DEBUG >= 2
#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args)
#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args)
#else
-#define SBP2_DEBUG(fmt, args...)
+#define SBP2_DEBUG(fmt, args...) do {} while (0)
#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args)
#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args)
/*
* Converts a buffer from be32 to cpu byte ordering. Length is in bytes.
*/
-static __inline__ void sbp2util_be32_to_cpu_buffer(void *buffer, int length)
+static inline void sbp2util_be32_to_cpu_buffer(void *buffer, int length)
{
u32 *temp = buffer;
/*
* Converts a buffer from cpu to be32 byte ordering. Length is in bytes.
*/
-static __inline__ void sbp2util_cpu_to_be32_buffer(void *buffer, int length)
+static inline void sbp2util_cpu_to_be32_buffer(void *buffer, int length)
{
u32 *temp = buffer;
}
#else /* BIG_ENDIAN */
/* Why waste the cpu cycles? */
-#define sbp2util_be32_to_cpu_buffer(x,y)
-#define sbp2util_cpu_to_be32_buffer(x,y)
+#define sbp2util_be32_to_cpu_buffer(x,y) do {} while (0)
+#define sbp2util_cpu_to_be32_buffer(x,y) do {} while (0)
#endif
#ifdef CONFIG_IEEE1394_SBP2_PACKET_DUMP
return;
}
#else
-#define sbp2util_packet_dump(w,x,y,z)
+#define sbp2util_packet_dump(w,x,y,z) do {} while (0)
#endif
+static DECLARE_WAIT_QUEUE_HEAD(access_wq);
+
/*
- * Goofy routine that basically does a down_timeout function.
+ * Waits for completion of an SBP-2 access request.
+ * Returns nonzero if timed out or prematurely interrupted.
*/
-static int sbp2util_down_timeout(atomic_t *done, int timeout)
+static int sbp2util_access_timeout(struct scsi_id_instance_data *scsi_id,
+ int timeout)
{
- int i;
+ long leftover = wait_event_interruptible_timeout(
+ access_wq, scsi_id->access_complete, timeout);
- for (i = timeout; (i > 0 && atomic_read(done) == 0); i-= HZ/10) {
- if (msleep_interruptible(100)) /* 100ms */
- return 1;
- }
- return (i > 0) ? 0 : 1;
+ scsi_id->access_complete = 0;
+ return leftover <= 0;
}
-/* Free's an allocated packet */
+/* Frees an allocated packet */
static void sbp2_free_packet(struct hpsb_packet *packet)
{
hpsb_free_tlabel(packet);
return 0;
}
+static void sbp2util_notify_fetch_agent(struct scsi_id_instance_data *scsi_id,
+ u64 offset, quadlet_t *data, size_t len)
+{
+ /*
+ * There is a small window after a bus reset within which the node
+ * entry's generation is current but the reconnect wasn't completed.
+ */
+ if (unlikely(atomic_read(&scsi_id->state) == SBP2LU_STATE_IN_RESET))
+ return;
+
+ if (hpsb_node_write(scsi_id->ne,
+ scsi_id->sbp2_command_block_agent_addr + offset,
+ data, len))
+ SBP2_ERR("sbp2util_notify_fetch_agent failed.");
+ /*
+ * Now accept new SCSI commands, unless a bus reset happended during
+ * hpsb_node_write.
+ */
+ if (likely(atomic_read(&scsi_id->state) != SBP2LU_STATE_IN_RESET))
+ scsi_unblock_requests(scsi_id->scsi_host);
+}
+
+static void sbp2util_write_orb_pointer(void *p)
+{
+ quadlet_t data[2];
+
+ data[0] = ORB_SET_NODE_ID(
+ ((struct scsi_id_instance_data *)p)->hi->host->node_id);
+ data[1] = ((struct scsi_id_instance_data *)p)->last_orb_dma;
+ sbp2util_cpu_to_be32_buffer(data, 8);
+ sbp2util_notify_fetch_agent(p, SBP2_ORB_POINTER_OFFSET, data, 8);
+}
+
+static void sbp2util_write_doorbell(void *p)
+{
+ sbp2util_notify_fetch_agent(p, SBP2_DOORBELL_OFFSET, NULL, 4);
+}
+
/*
* This function is called to create a pool of command orbs used for
* command processing. It is called when a new sbp2 device is detected.
command->command_orb_dma =
pci_map_single(hi->host->pdev, &command->command_orb,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
SBP2_DMA_ALLOC("single command orb DMA");
command->sge_dma =
pci_map_single(hi->host->pdev,
/* Release our generic DMA's */
pci_unmap_single(host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
SBP2_DMA_FREE("single command orb DMA");
pci_unmap_single(host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
/* scsi_remove_device() will trigger shutdown functions of SCSI
* highlevel drivers which would deadlock if blocked. */
+ atomic_set(&scsi_id->state, SBP2LU_STATE_IN_SHUTDOWN);
scsi_unblock_requests(scsi_id->scsi_host);
}
sdev = scsi_id->sdev;
*/
sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
- /* Make sure we unblock requests (since this is likely after a bus
- * reset). */
- scsi_unblock_requests(scsi_id->scsi_host);
-
+ /* Accept new commands unless there was another bus reset in the
+ * meantime. */
+ if (hpsb_node_entry_valid(scsi_id->ne)) {
+ atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING);
+ scsi_unblock_requests(scsi_id->scsi_host);
+ }
return 0;
}
scsi_id->speed_code = IEEE1394_SPEED_100;
scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
scsi_id->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
- atomic_set(&scsi_id->sbp2_login_complete, 0);
INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse);
INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed);
INIT_LIST_HEAD(&scsi_id->scsi_list);
spin_lock_init(&scsi_id->sbp2_command_orb_lock);
+ atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING);
+ INIT_WORK(&scsi_id->protocol_work, NULL, NULL);
ud->device.driver_data = scsi_id;
struct scsi_id_instance_data *scsi_id;
hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
-
- if (hi) {
- list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list)
+ if (!hi)
+ return;
+ list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list)
+ if (likely(atomic_read(&scsi_id->state) !=
+ SBP2LU_STATE_IN_SHUTDOWN)) {
+ atomic_set(&scsi_id->state, SBP2LU_STATE_IN_RESET);
scsi_block_requests(scsi_id->scsi_host);
- }
+ }
}
/*
* connected to the sbp2 device being removed. That host would
* have a certain amount of time to relogin before the sbp2 device
* allows someone else to login instead. One second makes sense. */
- msleep_interruptible(1000);
- if (signal_pending(current)) {
+ if (msleep_interruptible(1000)) {
sbp2_remove_device(scsi_id);
return -EINTR;
}
scsi_remove_host(scsi_id->scsi_host);
scsi_host_put(scsi_id->scsi_host);
}
-
+ flush_scheduled_work();
sbp2util_remove_command_orb_pool(scsi_id);
list_del(&scsi_id->scsi_list);
"sbp2 query logins orb", scsi_id->query_logins_orb_dma);
memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response));
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->query_logins_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) {
+ if (sbp2util_access_timeout(scsi_id, 2*HZ)) {
SBP2_INFO("Error querying logins to SBP-2 device - timed out");
return -EIO;
}
return -EIO;
}
- if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- SBP2_INFO("Error querying logins to SBP-2 device - timed out");
+ if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ SBP2_INFO("Error querying logins to SBP-2 device - failed");
return -EIO;
}
"sbp2 login orb", scsi_id->login_orb_dma);
memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response));
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->login_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
/*
* Wait for login status (up to 20 seconds)...
*/
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 20*HZ)) {
- SBP2_ERR("Error logging into SBP-2 device - login timed-out");
+ if (sbp2util_access_timeout(scsi_id, 20*HZ)) {
+ SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
* Sanity. Make sure status returned matches login orb.
*/
if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) {
- SBP2_ERR("Error logging into SBP-2 device - login timed-out");
+ SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
- /*
- * Check status
- */
- if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- SBP2_ERR("Error logging into SBP-2 device - login failed");
+ if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ SBP2_ERR("Error logging into SBP-2 device - failed");
return -EIO;
}
scsi_id->sbp2_command_block_agent_addr &= 0x0000ffffffffffffULL;
SBP2_INFO("Logged into SBP-2 device");
-
return 0;
-
}
/*
data[1] = scsi_id->logout_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
error = hpsb_node_write(scsi_id->ne,
scsi_id->sbp2_management_agent_addr, data, 8);
if (error)
return error;
/* Wait for device to logout...1 second. */
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ))
+ if (sbp2util_access_timeout(scsi_id, HZ))
return -EIO;
SBP2_INFO("Logged out of SBP-2 device");
-
return 0;
-
}
/*
sbp2util_packet_dump(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb),
"sbp2 reconnect orb", scsi_id->reconnect_orb_dma);
- /*
- * Initialize status fifo
- */
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
-
- /*
- * Ok, let's write to the target's management agent register
- */
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->reconnect_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
error = hpsb_node_write(scsi_id->ne,
scsi_id->sbp2_management_agent_addr, data, 8);
if (error)
/*
* Wait for reconnect status (up to 1 second)...
*/
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ)) {
- SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out");
+ if (sbp2util_access_timeout(scsi_id, HZ)) {
+ SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
* Sanity. Make sure status returned matches reconnect orb.
*/
if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) {
- SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out");
+ SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
- /*
- * Check status
- */
- if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- SBP2_ERR("Error reconnecting to SBP-2 device - reconnect failed");
+ if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ SBP2_ERR("Error reconnecting to SBP-2 device - failed");
return -EIO;
}
HPSB_DEBUG("Reconnected to SBP-2 device");
-
return 0;
-
}
/*
}
workarounds = sbp2_default_workarounds;
- if (force_inquiry_hack) {
- SBP2_WARN("force_inquiry_hack is deprecated. "
- "Use parameter 'workarounds' instead.");
- workarounds |= SBP2_WORKAROUND_INQUIRY_36;
- }
if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
quadlet_t data;
u64 addr;
int retval;
+ unsigned long flags;
SBP2_DEBUG_ENTER();
+ cancel_delayed_work(&scsi_id->protocol_work);
+ if (wait)
+ flush_scheduled_work();
+
data = ntohl(SBP2_AGENT_RESET_DATA);
addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
/*
* Need to make sure orb pointer is written on next command
*/
+ spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
scsi_id->last_orb = NULL;
+ spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
return 0;
}
/*
* This function is called in order to begin a regular SBP-2 command.
*/
-static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
+static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
struct sbp2_command_orb *command_orb = &command->command_orb;
- struct node_entry *ne = scsi_id->ne;
- u64 addr;
+ struct sbp2_command_orb *last_orb;
+ dma_addr_t last_orb_dma;
+ u64 addr = scsi_id->sbp2_command_block_agent_addr;
+ quadlet_t data[2];
+ size_t length;
+ unsigned long flags;
outstanding_orb_incr;
SBP2_ORB_DEBUG("sending command orb %p, total orbs = %x",
pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_device(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
/*
* Check to see if there are any previous orbs to use
*/
- if (scsi_id->last_orb == NULL) {
- quadlet_t data[2];
-
+ spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
+ last_orb = scsi_id->last_orb;
+ last_orb_dma = scsi_id->last_orb_dma;
+ if (!last_orb) {
/*
- * Ok, let's write to the target's management agent register
+ * last_orb == NULL means: We know that the target's fetch agent
+ * is not active right now.
*/
- addr = scsi_id->sbp2_command_block_agent_addr + SBP2_ORB_POINTER_OFFSET;
+ addr += SBP2_ORB_POINTER_OFFSET;
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = command->command_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
-
- SBP2_ORB_DEBUG("write command agent, command orb %p", command_orb);
-
- if (sbp2util_node_write_no_wait(ne, addr, data, 8) < 0) {
- SBP2_ERR("sbp2util_node_write_no_wait failed.\n");
- return -EIO;
- }
-
- SBP2_ORB_DEBUG("write command agent complete");
-
- scsi_id->last_orb = command_orb;
- scsi_id->last_orb_dma = command->command_orb_dma;
-
+ length = 8;
} else {
- quadlet_t data;
-
/*
- * We have an orb already sent (maybe or maybe not
- * processed) that we can append this orb to. So do so,
- * and ring the doorbell. Have to be very careful
- * modifying these next orb pointers, as they are accessed
- * both by the sbp2 device and us.
+ * last_orb != NULL means: We know that the target's fetch agent
+ * is (very probably) not dead or in reset state right now.
+ * We have an ORB already sent that we can append a new one to.
+ * The target's fetch agent may or may not have read this
+ * previous ORB yet.
*/
- scsi_id->last_orb->next_ORB_lo =
- cpu_to_be32(command->command_orb_dma);
+ pci_dma_sync_single_for_cpu(hi->host->pdev, last_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ PCI_DMA_TODEVICE);
+ last_orb->next_ORB_lo = cpu_to_be32(command->command_orb_dma);
+ wmb();
/* Tells hardware that this pointer is valid */
- scsi_id->last_orb->next_ORB_hi = 0x0;
- pci_dma_sync_single_for_device(hi->host->pdev,
- scsi_id->last_orb_dma,
+ last_orb->next_ORB_hi = 0;
+ pci_dma_sync_single_for_device(hi->host->pdev, last_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
+ addr += SBP2_DOORBELL_OFFSET;
+ data[0] = 0;
+ length = 4;
+ }
+ scsi_id->last_orb = command_orb;
+ scsi_id->last_orb_dma = command->command_orb_dma;
+ spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ SBP2_ORB_DEBUG("write to %s register, command orb %p",
+ last_orb ? "DOORBELL" : "ORB_POINTER", command_orb);
+ if (sbp2util_node_write_no_wait(scsi_id->ne, addr, data, length)) {
/*
- * Ring the doorbell
+ * sbp2util_node_write_no_wait failed. We certainly ran out
+ * of transaction labels, perhaps just because there were no
+ * context switches which gave khpsbpkt a chance to collect
+ * free tlabels. Try again in non-atomic context. If necessary,
+ * the workqueue job will sleep to guaranteedly get a tlabel.
+ * We do not accept new commands until the job is over.
*/
- data = cpu_to_be32(command->command_orb_dma);
- addr = scsi_id->sbp2_command_block_agent_addr + SBP2_DOORBELL_OFFSET;
-
- SBP2_ORB_DEBUG("ring doorbell, command orb %p", command_orb);
-
- if (sbp2util_node_write_no_wait(ne, addr, &data, 4) < 0) {
- SBP2_ERR("sbp2util_node_write_no_wait failed");
- return -EIO;
- }
-
- scsi_id->last_orb = command_orb;
- scsi_id->last_orb_dma = command->command_orb_dma;
-
+ scsi_block_requests(scsi_id->scsi_host);
+ PREPARE_WORK(&scsi_id->protocol_work,
+ last_orb ? sbp2util_write_doorbell:
+ sbp2util_write_orb_pointer,
+ scsi_id);
+ schedule_work(&scsi_id->protocol_work);
}
- return 0;
}
/*
sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb),
"sbp2 command orb", command->command_orb_dma);
- /*
- * Initialize status fifo
- */
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
-
/*
* Link up the orb, and ring the doorbell if needed
*/
/*
* This function deals with status writes from the SBP-2 device
*/
-static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
- quadlet_t *data, u64 addr, size_t length, u16 fl)
+static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
+ int destid, quadlet_t *data, u64 addr,
+ size_t length, u16 fl)
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
struct scsi_cmnd *SCpnt = NULL;
+ struct sbp2_status_block *sb;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
unsigned long flags;
sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr);
- if (!host) {
+ if (unlikely(length < 8 || length > sizeof(struct sbp2_status_block))) {
+ SBP2_ERR("Wrong size of status block");
+ return RCODE_ADDRESS_ERROR;
+ }
+ if (unlikely(!host)) {
SBP2_ERR("host is NULL - this is bad!");
return RCODE_ADDRESS_ERROR;
}
-
hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
-
- if (!hi) {
+ if (unlikely(!hi)) {
SBP2_ERR("host info is NULL - this is bad!");
return RCODE_ADDRESS_ERROR;
}
-
/*
* Find our scsi_id structure by looking at the status fifo address
* written to by the sbp2 device.
break;
}
}
-
- if (!scsi_id) {
+ if (unlikely(!scsi_id)) {
SBP2_ERR("scsi_id is NULL - device is gone?");
return RCODE_ADDRESS_ERROR;
}
/*
- * Put response into scsi_id status fifo...
+ * Put response into scsi_id status fifo buffer. The first two bytes
+ * come in big endian bit order. Often the target writes only a
+ * truncated status block, minimally the first two quadlets. The rest
+ * is implied to be zeros.
*/
- memcpy(&scsi_id->status_block, data, length);
+ sb = &scsi_id->status_block;
+ memset(sb->command_set_dependent, 0, sizeof(sb->command_set_dependent));
+ memcpy(sb, data, length);
+ sbp2util_be32_to_cpu_buffer(sb, 8);
/*
- * Byte swap first two quadlets (8 bytes) of status for processing
+ * Ignore unsolicited status. Handle command ORB status.
*/
- sbp2util_be32_to_cpu_buffer(&scsi_id->status_block, 8);
-
- /*
- * Handle command ORB status here if necessary. First, need to match status with command.
- */
- command = sbp2util_find_command_for_orb(scsi_id, scsi_id->status_block.ORB_offset_lo);
+ if (unlikely(STATUS_GET_SRC(sb->ORB_offset_hi_misc) == 2))
+ command = NULL;
+ else
+ command = sbp2util_find_command_for_orb(scsi_id,
+ sb->ORB_offset_lo);
if (command) {
-
SBP2_DEBUG("Found status for command ORB");
pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
outstanding_orb_decr;
/*
- * Matched status with command, now grab scsi command pointers and check status
+ * Matched status with command, now grab scsi command pointers
+ * and check status.
+ */
+ /*
+ * FIXME: If the src field in the status is 1, the ORB DMA must
+ * not be reused until status for a subsequent ORB is received.
*/
SCpnt = command->Current_SCpnt;
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
if (SCpnt) {
-
+ u32 h = sb->ORB_offset_hi_misc;
+ u32 r = STATUS_GET_RESP(h);
+
+ if (r != RESP_STATUS_REQUEST_COMPLETE) {
+ SBP2_WARN("resp 0x%x, sbp_status 0x%x",
+ r, STATUS_GET_SBP_STATUS(h));
+ scsi_status =
+ r == RESP_STATUS_TRANSPORT_FAILURE ?
+ SBP2_SCSI_STATUS_BUSY :
+ SBP2_SCSI_STATUS_COMMAND_TERMINATED;
+ }
/*
- * See if the target stored any scsi status information
+ * See if the target stored any scsi status information.
*/
- if (STATUS_GET_LENGTH(scsi_id->status_block.ORB_offset_hi_misc) > 1) {
- /*
- * Translate SBP-2 status to SCSI sense data
- */
+ if (STATUS_GET_LEN(h) > 1) {
SBP2_DEBUG("CHECK CONDITION");
- scsi_status = sbp2_status_to_sense_data((unchar *)&scsi_id->status_block, SCpnt->sense_buffer);
+ scsi_status = sbp2_status_to_sense_data(
+ (unchar *)sb, SCpnt->sense_buffer);
}
-
/*
- * Check to see if the dead bit is set. If so, we'll have to initiate
- * a fetch agent reset.
+ * Check to see if the dead bit is set. If so, we'll
+ * have to initiate a fetch agent reset.
*/
- if (STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- /*
- * Initiate a fetch agent reset.
- */
- SBP2_DEBUG("Dead bit set - initiating fetch agent reset");
+ if (STATUS_TEST_DEAD(h)) {
+ SBP2_DEBUG("Dead bit set - "
+ "initiating fetch agent reset");
sbp2_agent_reset(scsi_id, 0);
}
-
SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb);
}
/*
- * Check here to see if there are no commands in-use. If there are none, we can
- * null out last orb so that next time around we write directly to the orb pointer...
- * Quick start saves one 1394 bus transaction.
+ * Check here to see if there are no commands in-use. If there
+ * are none, we know that the fetch agent left the active state
+ * _and_ that we did not reactivate it yet. Therefore clear
+ * last_orb so that next time we write directly to the
+ * ORB_POINTER register. That way the fetch agent does not need
+ * to refetch the next_ORB.
*/
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- if (list_empty(&scsi_id->sbp2_command_orb_inuse)) {
+ if (list_empty(&scsi_id->sbp2_command_orb_inuse))
scsi_id->last_orb = NULL;
- }
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
} else {
-
/*
* It's probably a login/logout/reconnect status.
*/
- if ((scsi_id->login_orb_dma == scsi_id->status_block.ORB_offset_lo) ||
- (scsi_id->query_logins_orb_dma == scsi_id->status_block.ORB_offset_lo) ||
- (scsi_id->reconnect_orb_dma == scsi_id->status_block.ORB_offset_lo) ||
- (scsi_id->logout_orb_dma == scsi_id->status_block.ORB_offset_lo)) {
- atomic_set(&scsi_id->sbp2_login_complete, 1);
+ if ((sb->ORB_offset_lo == scsi_id->reconnect_orb_dma) ||
+ (sb->ORB_offset_lo == scsi_id->login_orb_dma) ||
+ (sb->ORB_offset_lo == scsi_id->query_logins_orb_dma) ||
+ (sb->ORB_offset_lo == scsi_id->logout_orb_dma)) {
+ scsi_id->access_complete = 1;
+ wake_up_interruptible(&access_wq);
}
}
if (SCpnt) {
-
- /* Complete the SCSI command. */
SBP2_DEBUG("Completing SCSI command");
sbp2scsi_complete_command(scsi_id, scsi_status, SCpnt,
command->Current_done);
command = list_entry(lh, struct sbp2_command_info, list);
pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
(struct scsi_id_instance_data *)sdev->host->hostdata[0];
scsi_id->sdev = sdev;
+ sdev->allow_restart = 1;
if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
- sdev->use_10_for_ms = 1;
if (sdev->type == TYPE_DISK &&
scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
sdev->skip_ms_page_8 = 1;
if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
sdev->fix_capacity = 1;
- if (scsi_id->ne->guid_vendor_id == 0x0010b9 && /* Maxtor's OUI */
- (sdev->type == TYPE_DISK || sdev->type == TYPE_RBC))
- sdev->allow_restart = 1;
return 0;
}
pci_dma_sync_single_for_cpu(hi->host->pdev,
command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_cpu(hi->host->pdev,
command->sge_dma,
sizeof(command->scatter_gather_element),
/*
* Initiate a fetch agent reset.
*/
- sbp2_agent_reset(scsi_id, 0);
+ sbp2_agent_reset(scsi_id, 1);
sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
}
if (sbp2util_node_is_available(scsi_id)) {
SBP2_ERR("Generating sbp2 fetch agent reset");
- sbp2_agent_reset(scsi_id, 0);
+ sbp2_agent_reset(scsi_id, 1);
}
return SUCCESS;
#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
- volatile u32 next_ORB_hi;
- volatile u32 next_ORB_lo;
+ u32 next_ORB_hi;
+ u32 next_ORB_lo;
u32 data_descriptor_hi;
u32 data_descriptor_lo;
u32 misc;
#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
-#define STATUS_GET_ORB_OFFSET_HI(value) (value & 0xffff)
-#define STATUS_GET_SBP_STATUS(value) ((value >> 16) & 0xff)
-#define STATUS_GET_LENGTH(value) ((value >> 24) & 0x7)
-#define STATUS_GET_DEAD_BIT(value) ((value >> 27) & 0x1)
-#define STATUS_GET_RESP(value) ((value >> 28) & 0x3)
-#define STATUS_GET_SRC(value) ((value >> 30) & 0x3)
+#define STATUS_GET_SRC(value) (((value) >> 30) & 0x3)
+#define STATUS_GET_RESP(value) (((value) >> 28) & 0x3)
+#define STATUS_GET_LEN(value) (((value) >> 24) & 0x7)
+#define STATUS_GET_SBP_STATUS(value) (((value) >> 16) & 0xff)
+#define STATUS_GET_ORB_OFFSET_HI(value) ((value) & 0x0000ffff)
+#define STATUS_TEST_DEAD(value) ((value) & 0x08000000)
+/* test 'resp' | 'dead' | 'sbp2_status' */
+#define STATUS_TEST_RDS(value) ((value) & 0x38ff0000)
struct sbp2_status_block {
u32 ORB_offset_hi_misc;
u64 status_fifo_addr;
/*
- * Variable used for logins, reconnects, logouts, query logins
+ * Waitqueue flag for logins, reconnects, logouts, query logins
*/
- atomic_t sbp2_login_complete;
+ int access_complete:1;
/*
* Pool of command orbs, so we can have more than overlapped command per id
/* Device specific workarounds/brokeness */
unsigned workarounds;
+
+ atomic_t state;
+ struct work_struct protocol_work;
+};
+
+/* For use in scsi_id_instance_data.state */
+enum sbp2lu_state_types {
+ SBP2LU_STATE_RUNNING, /* all normal */
+ SBP2LU_STATE_IN_RESET, /* between bus reset and reconnect */
+ SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */
};
/* Sbp2 host data structure (one per IEEE1394 host) */
static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
quadlet_t *data, u64 addr, size_t length, u16 flags);
static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait);
-static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
- struct sbp2_command_info *command);
-static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
- struct scsi_cmnd *SCpnt,
- void (*done)(struct scsi_cmnd *));
static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
unchar *sense_data);
static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
#include <linux/compat.h>
#include <linux/cdev.h>
-#include "ieee1394.h"
-#include "ieee1394_types.h"
+#include "dma.h"
+#include "highlevel.h"
#include "hosts.h"
+#include "ieee1394.h"
#include "ieee1394_core.h"
-#include "highlevel.h"
-#include "video1394.h"
+#include "ieee1394_hotplug.h"
+#include "ieee1394_types.h"
#include "nodemgr.h"
-#include "dma.h"
-
#include "ohci1394.h"
+#include "video1394.h"
#define ISO_CHANNELS 64
#define DBGMSG(card, fmt, args...) \
printk(KERN_INFO "video1394_%d: " fmt "\n" , card , ## args)
#else
-#define DBGMSG(card, fmt, args...)
+#define DBGMSG(card, fmt, args...) do {} while (0)
#endif
/* print general (card independent) information */
lock_kernel();
if (ctx->current_ctx == NULL) {
- PRINT(KERN_ERR, ctx->ohci->host->id, "Current iso context not set");
+ PRINT(KERN_ERR, ctx->ohci->host->id,
+ "Current iso context not set");
} else
res = dma_region_mmap(&ctx->current_ctx->dma, file, vma);
unlock_kernel();
return res;
}
+static unsigned int video1394_poll(struct file *file, poll_table *pt)
+{
+ struct file_ctx *ctx;
+ unsigned int mask = 0;
+ unsigned long flags;
+ struct dma_iso_ctx *d;
+ int i;
+
+ lock_kernel();
+ ctx = file->private_data;
+ d = ctx->current_ctx;
+ if (d == NULL) {
+ PRINT(KERN_ERR, ctx->ohci->host->id,
+ "Current iso context not set");
+ mask = POLLERR;
+ goto done;
+ }
+
+ poll_wait(file, &d->waitq, pt);
+
+ spin_lock_irqsave(&d->lock, flags);
+ for (i = 0; i < d->num_desc; i++) {
+ if (d->buffer_status[i] == VIDEO1394_BUFFER_READY) {
+ mask |= POLLIN | POLLRDNORM;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&d->lock, flags);
+done:
+ unlock_kernel();
+
+ return mask;
+}
+
static int video1394_open(struct inode *inode, struct file *file)
{
int i = ieee1394_file_to_instance(file);
#ifdef CONFIG_COMPAT
.compat_ioctl = video1394_compat_ioctl,
#endif
+ .poll = video1394_poll,
.mmap = video1394_mmap,
.open = video1394_open,
.release = video1394_release
projects / linux-2.6-block.git / commitdiff