arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes

Add dts nodes for the secondary USB controller and related PHY nodes.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-6-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 0d932c7d5e9560b3e7b8efe207d9970333d97477..e40bec6f362386b802f9e1d259fc8cbfa2cdc6b0 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -845,6 +845,19 @@
                        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
                };
 
+               usb_2_hsphy: phy@88e3000 {
+                       compatible = "qcom,sm8150-usb-hs-phy",
+                                    "qcom,usb-snps-hs-7nm-phy";
+                       reg = <0 0x088e3000 0 0x400>;
+                       status = "disabled";
+                       #phy-cells = <0>;
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "ref";
+
+                       resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+               };
+
                usb_1_qmpphy: phy@88e9000 {
                        compatible = "qcom,sm8150-qmp-usb3-phy";
                        reg = <0 0x088e9000 0 0x18c>,
@@ -894,6 +907,37 @@
                        qcom,bcm-voters = <&apps_bcm_voter>;
                };
 
+               usb_2_qmpphy: phy@88eb000 {
+                       compatible = "qcom,sm8150-qmp-usb3-uni-phy";
+                       reg = <0 0x088eb000 0 0x200>;
+                       status = "disabled";
+                       #clock-cells = <1>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                                <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+                       clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+                       resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                                <&gcc GCC_USB3_PHY_SEC_BCR>;
+                       reset-names = "phy", "common";
+
+                       usb_2_ssphy: lane@88eb200 {
+                               reg = <0 0x088eb200 0 0x200>,
+                                     <0 0x088eb400 0 0x200>,
+                                     <0 0x088eb800 0 0x800>,
+                                     <0 0x088eb600 0 0x200>;
+                               #phy-cells = <0>;
+                               clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb3_uni_phy_pipe_clk_src";
+                       };
+               };
+
                usb_1: usb@a6f8800 {
                        compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
                        reg = <0 0x0a6f8800 0 0x400>;
@@ -946,6 +990,51 @@
                        qcom,bcm-voters = <&apps_bcm_voter>;
                };
 
+               usb_2: usb@a8f8800 {
+                       compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+                       reg = <0 0x0a8f8800 0 0x400>;
+                       status = "disabled";
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       dma-ranges;
+
+                       clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+                                <&gcc GCC_USB30_SEC_MASTER_CLK>,
+                                <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+                                <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+                                <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+                                <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+                       clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+                                     "sleep", "xo";
+
+                       assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+                                         <&gcc GCC_USB30_SEC_MASTER_CLK>;
+                       assigned-clock-rates = <19200000>, <200000000>;
+
+                       interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hs_phy_irq", "ss_phy_irq",
+                                         "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+                       power-domains = <&gcc USB30_SEC_GDSC>;
+
+                       resets = <&gcc GCC_USB30_SEC_BCR>;
+
+                       usb_2_dwc3: dwc3@a800000 {
+                               compatible = "snps,dwc3";
+                               reg = <0 0x0a800000 0 0xcd00>;
+                               interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+                               iommus = <&apps_smmu 0x160 0>;
+                               snps,dis_u2_susphy_quirk;
+                               snps,dis_enblslpm_quirk;
+                               phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+                               phy-names = "usb2-phy", "usb3-phy";
+                       };
+               };
+
                aoss_qmp: power-controller@c300000 {
                        compatible = "qcom,sm8150-aoss-qmp";
                        reg = <0x0 0x0c300000 0x0 0x100000>;