8139cp/8139too: terminate the eeprom access with the right opmode
authorJason Wang <jasowang@redhat.com>
Thu, 31 May 2012 18:19:48 +0000 (18:19 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 1 Jun 2012 18:22:11 +0000 (14:22 -0400)
Currently, we terminate the eeprom access through clearing the CS by:

RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr);

This would left the eeprom into "Config. Register Write Enable:"
state which is not expcted as the highest two bits were set to
0x11 ( expected is the "Normal" mode (0x00)). Solving this by write
0x0 instead of ~EE_CS when terminating the eeprom access.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/realtek/8139cp.c
drivers/net/ethernet/realtek/8139too.c

index 7f08779acba413672db1caa2cbf084fdc5494d66..995d0cfc4c065658ad47279a3705beb27b8c43f0 100644 (file)
@@ -1636,7 +1636,7 @@ static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)
 
 static void eeprom_cmd_end(void __iomem *ee_addr)
 {
-       writeb (~EE_CS, ee_addr);
+       writeb(0, ee_addr);
        eeprom_delay ();
 }
 
index 03df076ed596086abbfd1dde5383badc4614ab8e..1d83565cc6af6dca0e61360c1c60394e1fb5682d 100644 (file)
@@ -1173,7 +1173,7 @@ static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_l
        }
 
        /* Terminate the EEPROM access. */
-       RTL_W8 (Cfg9346, ~EE_CS);
+       RTL_W8(Cfg9346, 0);
        eeprom_delay ();
 
        return retval;