ARM: dts: am57xx-beagle-x15: Add support for rev B1
authorNishanth Menon <nm@ti.com>
Fri, 2 Sep 2016 17:14:45 +0000 (12:14 -0500)
committerTony Lindgren <tony@atomide.com>
Tue, 13 Sep 2016 23:14:19 +0000 (16:14 -0700)
Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates
for allowing UHS SD cards to function with the split of supply to SD
card from a dedicated LDO.

As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead
of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from
GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V
SoC input when the SD card is in UHS 1.8V mode.

NOTE: For UHS mode to function, we need full fledged IODelay support
in kernel to be functional. IODelay support is yet to be added.

Further, It does not make much sense to spin off a new board
compatible flag since there is no real functional benefit for the
same.

Note: Even though production version is supposed to be B1, there is
over ~200 boards of previous version (A2)[2] out there which continue
to get supported with the existing dts file (to maintain compatibility
with existing bootloaders for A2) and the production board is now
supported as revb1.

[1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf
[2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2

Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi [new file with mode: 0644]
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts [new file with mode: 0644]
arch/arm/boot/dts/am57xx-beagle-x15.dts

index faacd52370d24061e705d4e97785c254cf147f8c..b8d9840895c280bcadfc7b4c09833cac82e21a6c 100644 (file)
@@ -570,6 +570,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \
        omap5-uevm.dtb
 dtb-$(CONFIG_SOC_DRA7XX) += \
        am57xx-beagle-x15.dtb \
+       am57xx-beagle-x15-revb1.dtb \
        am57xx-cl-som-am57x.dtb \
        am57xx-sbc-am57x.dtb \
        am572x-idk.dtb \
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
new file mode 100644 (file)
index 0000000..ec85ff9
--- /dev/null
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+       aliases {
+               rtc0 = &mcp_rtc;
+               rtc1 = &tps659038_rtc;
+               rtc2 = &rtc;
+               display0 = &hdmi0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x80000000 0x0 0x80000000>;
+       };
+
+       vdd_3v3: fixedregulator-vdd_3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd_3v3";
+               vin-supply = <&regen1>;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       aic_dvdd: fixedregulator-aic_dvdd {
+               compatible = "regulator-fixed";
+               regulator-name = "aic_dvdd_fixed";
+               vin-supply = <&vdd_3v3>;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
+       vtt_fixed: fixedregulator-vtt {
+               /* TPS51200 */
+               compatible = "regulator-fixed";
+               regulator-name = "vtt_fixed";
+               vin-supply = <&smps3_reg>;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led0 {
+                       label = "beagle-x15:usr0";
+                       gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+                       default-state = "off";
+               };
+
+               led1 {
+                       label = "beagle-x15:usr1";
+                       gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "cpu0";
+                       default-state = "off";
+               };
+
+               led2 {
+                       label = "beagle-x15:usr2";
+                       gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "mmc0";
+                       default-state = "off";
+               };
+
+               led3 {
+                       label = "beagle-x15:usr3";
+                       gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "disk-activity";
+                       default-state = "off";
+               };
+       };
+
+       gpio_fan: gpio_fan {
+               /* Based on 5v 500mA AFB02505HHB */
+               compatible = "gpio-fan";
+               gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+               gpio-fan,speed-map = <0     0>,
+                                    <13000 1>;
+               #cooling-cells = <2>;
+       };
+
+       hdmi0: connector {
+               compatible = "hdmi-connector";
+               label = "hdmi";
+
+               type = "a";
+
+               port {
+                       hdmi_connector_in: endpoint {
+                               remote-endpoint = <&tpd12s015_out>;
+                       };
+               };
+       };
+
+       tpd12s015: encoder {
+               compatible = "ti,tpd12s015";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               tpd12s015_in: endpoint {
+                                       remote-endpoint = <&hdmi_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               tpd12s015_out: endpoint {
+                                       remote-endpoint = <&hdmi_connector_in>;
+                               };
+                       };
+               };
+       };
+
+       sound0: sound0 {
+               compatible = "simple-audio-card";
+               simple-audio-card,name = "BeagleBoard-X15";
+               simple-audio-card,widgets =
+                       "Line", "Line Out",
+                       "Line", "Line In";
+               simple-audio-card,routing =
+                       "Line Out",     "LLOUT",
+                       "Line Out",     "RLOUT",
+                       "MIC2L",        "Line In",
+                       "MIC2R",        "Line In";
+               simple-audio-card,format = "dsp_b";
+               simple-audio-card,bitclock-master = <&sound0_master>;
+               simple-audio-card,frame-master = <&sound0_master>;
+               simple-audio-card,bitclock-inversion;
+
+               simple-audio-card,cpu {
+                       sound-dai = <&mcasp3>;
+               };
+
+               sound0_master: simple-audio-card,codec {
+                       sound-dai = <&tlv320aic3104>;
+                       clocks = <&clkout2_clk>;
+               };
+       };
+};
+
+&dra7_pmx_core {
+       mmc1_pins_default: mmc1_pins_default {
+               pinctrl-single,pins = <
+                       DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)       /* mmc1sdcd.gpio219 */
+                       DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+                       DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+                       DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+                       DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+                       DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+                       DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+               >;
+       };
+
+       mmc2_pins_default: mmc2_pins_default {
+               pinctrl-single,pins = <
+                       DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+                       DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+                       DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+                       DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+                       DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+                       DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+                       DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+                       DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+                       DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+                       DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+               >;
+       };
+};
+&i2c1 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       tps659038: tps659038@58 {
+               compatible = "ti,tps659038";
+               reg = <0x58>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+               #interrupt-cells = <2>;
+               interrupt-controller;
+
+               ti,system-power-controller;
+
+               tps659038_pmic {
+                       compatible = "ti,tps659038-pmic";
+
+                       regulators {
+                               smps12_reg: smps12 {
+                                       /* VDD_MPU */
+                                       regulator-name = "smps12";
+                                       regulator-min-microvolt = < 850000>;
+                                       regulator-max-microvolt = <1250000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               smps3_reg: smps3 {
+                                       /* VDD_DDR */
+                                       regulator-name = "smps3";
+                                       regulator-min-microvolt = <1350000>;
+                                       regulator-max-microvolt = <1350000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               smps45_reg: smps45 {
+                                       /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+                                       regulator-name = "smps45";
+                                       regulator-min-microvolt = < 850000>;
+                                       regulator-max-microvolt = <1250000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               smps6_reg: smps6 {
+                                       /* VDD_CORE */
+                                       regulator-name = "smps6";
+                                       regulator-min-microvolt = <850000>;
+                                       regulator-max-microvolt = <1150000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               /* SMPS7 unused */
+
+                               smps8_reg: smps8 {
+                                       /* VDD_1V8 */
+                                       regulator-name = "smps8";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               /* SMPS9 unused */
+
+                               ldo1_reg: ldo1 {
+                                       /* VDD_SD / VDDSHV8  */
+                                       regulator-name = "ldo1";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <3300000>;
+                                       regulator-boot-on;
+                                       regulator-always-on;
+                               };
+
+                               ldo2_reg: ldo2 {
+                                       /* VDD_SHV5 */
+                                       regulator-name = "ldo2";
+                                       regulator-min-microvolt = <3300000>;
+                                       regulator-max-microvolt = <3300000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               ldo3_reg: ldo3 {
+                                       /* VDDA_1V8_PHYA */
+                                       regulator-name = "ldo3";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               ldo4_reg: ldo4 {
+                                       /* VDDA_1V8_PHYB */
+                                       regulator-name = "ldo4";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               ldo9_reg: ldo9 {
+                                       /* VDD_RTC */
+                                       regulator-name = "ldo9";
+                                       regulator-min-microvolt = <1050000>;
+                                       regulator-max-microvolt = <1050000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               ldoln_reg: ldoln {
+                                       /* VDDA_1V8_PLL */
+                                       regulator-name = "ldoln";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       regulator-always-on;
+                                       regulator-boot-on;
+                               };
+
+                               ldousb_reg: ldousb {
+                                       /* VDDA_3V_USB: VDDA_USBHS33 */
+                                       regulator-name = "ldousb";
+                                       regulator-min-microvolt = <3300000>;
+                                       regulator-max-microvolt = <3300000>;
+                                       regulator-boot-on;
+                               };
+
+                               regen1: regen1 {
+                                       /* VDD_3V3_ON */
+                                       regulator-name = "regen1";
+                                       regulator-boot-on;
+                                       regulator-always-on;
+                               };
+                       };
+               };
+
+               tps659038_rtc: tps659038_rtc {
+                       compatible = "ti,palmas-rtc";
+                       interrupt-parent = <&tps659038>;
+                       interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+                       wakeup-source;
+               };
+
+               tps659038_pwr_button: tps659038_pwr_button {
+                       compatible = "ti,palmas-pwrbutton";
+                       interrupt-parent = <&tps659038>;
+                       interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+                       wakeup-source;
+                       ti,palmas-long-press-seconds = <12>;
+               };
+
+               tps659038_gpio: tps659038_gpio {
+                       compatible = "ti,palmas-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               extcon_usb2: tps659038_usb {
+                       compatible = "ti,palmas-usb-vid";
+                       ti,enable-vbus-detection;
+                       vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+               };
+
+       };
+
+       tmp102: tmp102@48 {
+               compatible = "ti,tmp102";
+               reg = <0x48>;
+               interrupt-parent = <&gpio7>;
+               interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+               #thermal-sensor-cells = <1>;
+       };
+
+       tlv320aic3104: tlv320aic3104@18 {
+               #sound-dai-cells = <0>;
+               compatible = "ti,tlv320aic3104";
+               reg = <0x18>;
+               assigned-clocks = <&clkoutmux2_clk_mux>;
+               assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+               status = "okay";
+               adc-settle-ms = <40>;
+
+               AVDD-supply = <&vdd_3v3>;
+               IOVDD-supply = <&vdd_3v3>;
+               DRVDD-supply = <&vdd_3v3>;
+               DVDD-supply = <&aic_dvdd>;
+       };
+
+       eeprom: eeprom@50 {
+               compatible = "at,24c32";
+               reg = <0x50>;
+       };
+};
+
+&i2c3 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       mcp_rtc: rtc@6f {
+               compatible = "microchip,mcp7941x";
+               reg = <0x6f>;
+               interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+                                     <&dra7_pmx_core 0x424>;
+               interrupt-names = "irq", "wakeup";
+
+               vcc-supply = <&vdd_3v3>;
+               wakeup-source;
+       };
+};
+
+&gpio7 {
+       ti,no-reset-on-init;
+       ti,no-idle-on-init;
+};
+
+&cpu0 {
+       cpu0-supply = <&smps12_reg>;
+       voltage-tolerance = <1>;
+};
+
+&uart3 {
+       status = "okay";
+       interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                             <&dra7_pmx_core 0x3f8>;
+};
+
+&mac {
+       status = "okay";
+       dual_emac;
+};
+
+&cpsw_emac0 {
+       phy_id = <&davinci_mdio>, <1>;
+       phy-mode = "rgmii";
+       dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+       phy_id = <&davinci_mdio>, <2>;
+       phy-mode = "rgmii";
+       dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_default>;
+
+       bus-width = <4>;
+       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
+&mmc2 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_default>;
+
+       vmmc-supply = <&vdd_3v3>;
+       bus-width = <8>;
+       ti,non-removable;
+       cap-mmc-dual-data-rate;
+};
+
+&sata {
+       status = "okay";
+};
+
+&usb2_phy1 {
+       phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+       phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+       dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+       extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+       /*
+        * Stand alone usage is peripheral only.
+        * However, with some resistor modifications
+        * this port can be used via expansion connectors
+        * as "host" or "dual-role". If so, provide
+        * the necessary dr_mode override in the expansion
+        * board's DT.
+        */
+       dr_mode = "peripheral";
+};
+
+&cpu_trips {
+       cpu_alert1: cpu_alert1 {
+               temperature = <50000>; /* millicelsius */
+               hysteresis = <2000>; /* millicelsius */
+               type = "active";
+       };
+};
+
+&cpu_cooling_maps {
+       map1 {
+               trip = <&cpu_alert1>;
+               cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+       };
+};
+
+&thermal_zones {
+       board_thermal: board_thermal {
+               polling-delay-passive = <1250>; /* milliseconds */
+               polling-delay = <1500>; /* milliseconds */
+
+                               /* sensor       ID */
+               thermal-sensors = <&tmp102     0>;
+
+               board_trips: trips {
+                       board_alert0: board_alert {
+                               temperature = <40000>; /* millicelsius */
+                               hysteresis = <2000>; /* millicelsius */
+                               type = "active";
+                       };
+
+                       board_crit: board_crit {
+                               temperature = <105000>; /* millicelsius */
+                               hysteresis = <0>; /* millicelsius */
+                               type = "critical";
+                       };
+               };
+
+               board_cooling_maps: cooling-maps {
+                       map0 {
+                               trip = <&board_alert0>;
+                               cooling-device =
+                                 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                       };
+               };
+       };
+};
+
+&dss {
+       status = "ok";
+
+       vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+       status = "ok";
+       vdda-supply = <&ldo4_reg>;
+
+       port {
+               hdmi_out: endpoint {
+                       remote-endpoint = <&tpd12s015_in>;
+               };
+       };
+};
+
+&pcie1 {
+       gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+       #sound-dai-cells = <0>;
+       assigned-clocks = <&mcasp3_ahclkx_mux>;
+       assigned-clock-parents = <&sys_clkin2>;
+       status = "okay";
+
+       op-mode = <0>;  /* MCASP_IIS_MODE */
+       tdm-slots = <2>;
+       /* 4 serializers */
+       serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+               1 2 0 0
+       >;
+       tx-num-evt = <32>;
+       rx-num-evt = <32>;
+};
+
+&mailbox5 {
+       status = "okay";
+       mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+               status = "okay";
+       };
+       mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+               status = "okay";
+       };
+};
+
+&mailbox6 {
+       status = "okay";
+       mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+               status = "okay";
+       };
+       mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+               status = "okay";
+       };
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
new file mode 100644 (file)
index 0000000..ca85570
--- /dev/null
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+       model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+       gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
+               <&gpio2 30 GPIO_ACTIVE_HIGH>,   /* gpio2_30, LS OE */
+               <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+       vmmc-supply = <&vdd_3v3>;
+       vmmc-aux-supply = <&ldo1_reg>;
+};
index ef21da558ea3be6ff92795d8fa49872b43e48d48..8c66f2efd283b2bcea47c5a219966303e838e915 100644 (file)
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/dts-v1/;
 
-#include "dra74x.dtsi"
-#include "am57xx-commercial-grade.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-beagle-x15-common.dtsi"
 
 / {
+       /* NOTE: This describes the "original" pre-production A2 revision */
        model = "TI AM5728 BeagleBoard-X15";
-       compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-       aliases {
-               rtc0 = &mcp_rtc;
-               rtc1 = &tps659038_rtc;
-               rtc2 = &rtc;
-               display0 = &hdmi0;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x80000000 0x0 0x80000000>;
-       };
-
-       vdd_3v3: fixedregulator-vdd_3v3 {
-               compatible = "regulator-fixed";
-               regulator-name = "vdd_3v3";
-               vin-supply = <&regen1>;
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-       };
-
-       aic_dvdd: fixedregulator-aic_dvdd {
-               compatible = "regulator-fixed";
-               regulator-name = "aic_dvdd_fixed";
-               vin-supply = <&vdd_3v3>;
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <1800000>;
-       };
-
-       vtt_fixed: fixedregulator-vtt {
-               /* TPS51200 */
-               compatible = "regulator-fixed";
-               regulator-name = "vtt_fixed";
-               vin-supply = <&smps3_reg>;
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-always-on;
-               regulator-boot-on;
-               enable-active-high;
-               gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led0 {
-                       label = "beagle-x15:usr0";
-                       gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "heartbeat";
-                       default-state = "off";
-               };
-
-               led1 {
-                       label = "beagle-x15:usr1";
-                       gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "cpu0";
-                       default-state = "off";
-               };
-
-               led2 {
-                       label = "beagle-x15:usr2";
-                       gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "mmc0";
-                       default-state = "off";
-               };
-
-               led3 {
-                       label = "beagle-x15:usr3";
-                       gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "disk-activity";
-                       default-state = "off";
-               };
-       };
-
-       gpio_fan: gpio_fan {
-               /* Based on 5v 500mA AFB02505HHB */
-               compatible = "gpio-fan";
-               gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
-               gpio-fan,speed-map = <0     0>,
-                                    <13000 1>;
-               #cooling-cells = <2>;
-       };
-
-       hdmi0: connector {
-               compatible = "hdmi-connector";
-               label = "hdmi";
-
-               type = "a";
-
-               port {
-                       hdmi_connector_in: endpoint {
-                               remote-endpoint = <&tpd12s015_out>;
-                       };
-               };
-       };
-
-       tpd12s015: encoder {
-               compatible = "ti,tpd12s015";
-
-               gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
-                       <&gpio6 28 GPIO_ACTIVE_HIGH>,   /* gpio6_28, LS OE */
-                       <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-
-                               tpd12s015_in: endpoint {
-                                       remote-endpoint = <&hdmi_out>;
-                               };
-                       };
-
-                       port@1 {
-                               reg = <1>;
-
-                               tpd12s015_out: endpoint {
-                                       remote-endpoint = <&hdmi_connector_in>;
-                               };
-                       };
-               };
-       };
-
-       sound0: sound0 {
-               compatible = "simple-audio-card";
-               simple-audio-card,name = "BeagleBoard-X15";
-               simple-audio-card,widgets =
-                       "Line", "Line Out",
-                       "Line", "Line In";
-               simple-audio-card,routing =
-                       "Line Out",     "LLOUT",
-                       "Line Out",     "RLOUT",
-                       "MIC2L",        "Line In",
-                       "MIC2R",        "Line In";
-               simple-audio-card,format = "dsp_b";
-               simple-audio-card,bitclock-master = <&sound0_master>;
-               simple-audio-card,frame-master = <&sound0_master>;
-               simple-audio-card,bitclock-inversion;
-
-               simple-audio-card,cpu {
-                       sound-dai = <&mcasp3>;
-               };
-
-               sound0_master: simple-audio-card,codec {
-                       sound-dai = <&tlv320aic3104>;
-                       clocks = <&clkout2_clk>;
-               };
-       };
-};
-
-&dra7_pmx_core {
-       mmc1_pins_default: mmc1_pins_default {
-               pinctrl-single,pins = <
-                       DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)       /* mmc1sdcd.gpio219 */
-                       DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-                       DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-                       DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-                       DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-                       DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-                       DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-               >;
-       };
-
-       mmc2_pins_default: mmc2_pins_default {
-               pinctrl-single,pins = <
-                       DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-                       DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-                       DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-                       DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-                       DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-                       DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-                       DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-                       DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-                       DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-                       DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-               >;
-       };
-};
-&i2c1 {
-       status = "okay";
-       clock-frequency = <400000>;
-
-       tps659038: tps659038@58 {
-               compatible = "ti,tps659038";
-               reg = <0x58>;
-               interrupt-parent = <&gpio1>;
-               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-               #interrupt-cells = <2>;
-               interrupt-controller;
-
-               ti,system-power-controller;
-
-               tps659038_pmic {
-                       compatible = "ti,tps659038-pmic";
-
-                       regulators {
-                               smps12_reg: smps12 {
-                                       /* VDD_MPU */
-                                       regulator-name = "smps12";
-                                       regulator-min-microvolt = < 850000>;
-                                       regulator-max-microvolt = <1250000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               smps3_reg: smps3 {
-                                       /* VDD_DDR */
-                                       regulator-name = "smps3";
-                                       regulator-min-microvolt = <1350000>;
-                                       regulator-max-microvolt = <1350000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               smps45_reg: smps45 {
-                                       /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
-                                       regulator-name = "smps45";
-                                       regulator-min-microvolt = < 850000>;
-                                       regulator-max-microvolt = <1250000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               smps6_reg: smps6 {
-                                       /* VDD_CORE */
-                                       regulator-name = "smps6";
-                                       regulator-min-microvolt = <850000>;
-                                       regulator-max-microvolt = <1150000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               /* SMPS7 unused */
-
-                               smps8_reg: smps8 {
-                                       /* VDD_1V8 */
-                                       regulator-name = "smps8";
-                                       regulator-min-microvolt = <1800000>;
-                                       regulator-max-microvolt = <1800000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               /* SMPS9 unused */
-
-                               ldo1_reg: ldo1 {
-                                       /* VDD_SD / VDDSHV8  */
-                                       regulator-name = "ldo1";
-                                       regulator-min-microvolt = <1800000>;
-                                       regulator-max-microvolt = <3300000>;
-                                       regulator-boot-on;
-                                       regulator-always-on;
-                               };
-
-                               ldo2_reg: ldo2 {
-                                       /* VDD_SHV5 */
-                                       regulator-name = "ldo2";
-                                       regulator-min-microvolt = <3300000>;
-                                       regulator-max-microvolt = <3300000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               ldo3_reg: ldo3 {
-                                       /* VDDA_1V8_PHYA */
-                                       regulator-name = "ldo3";
-                                       regulator-min-microvolt = <1800000>;
-                                       regulator-max-microvolt = <1800000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               ldo4_reg: ldo4 {
-                                       /* VDDA_1V8_PHYB */
-                                       regulator-name = "ldo4";
-                                       regulator-min-microvolt = <1800000>;
-                                       regulator-max-microvolt = <1800000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               ldo9_reg: ldo9 {
-                                       /* VDD_RTC */
-                                       regulator-name = "ldo9";
-                                       regulator-min-microvolt = <1050000>;
-                                       regulator-max-microvolt = <1050000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               ldoln_reg: ldoln {
-                                       /* VDDA_1V8_PLL */
-                                       regulator-name = "ldoln";
-                                       regulator-min-microvolt = <1800000>;
-                                       regulator-max-microvolt = <1800000>;
-                                       regulator-always-on;
-                                       regulator-boot-on;
-                               };
-
-                               ldousb_reg: ldousb {
-                                       /* VDDA_3V_USB: VDDA_USBHS33 */
-                                       regulator-name = "ldousb";
-                                       regulator-min-microvolt = <3300000>;
-                                       regulator-max-microvolt = <3300000>;
-                                       regulator-boot-on;
-                               };
-
-                               regen1: regen1 {
-                                       /* VDD_3V3_ON */
-                                       regulator-name = "regen1";
-                                       regulator-boot-on;
-                                       regulator-always-on;
-                               };
-                       };
-               };
-
-               tps659038_rtc: tps659038_rtc {
-                       compatible = "ti,palmas-rtc";
-                       interrupt-parent = <&tps659038>;
-                       interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-                       wakeup-source;
-               };
-
-               tps659038_pwr_button: tps659038_pwr_button {
-                       compatible = "ti,palmas-pwrbutton";
-                       interrupt-parent = <&tps659038>;
-                       interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-                       wakeup-source;
-                       ti,palmas-long-press-seconds = <12>;
-               };
-
-               tps659038_gpio: tps659038_gpio {
-                       compatible = "ti,palmas-gpio";
-                       gpio-controller;
-                       #gpio-cells = <2>;
-               };
-
-               extcon_usb2: tps659038_usb {
-                       compatible = "ti,palmas-usb-vid";
-                       ti,enable-vbus-detection;
-                       vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-               };
-
-       };
-
-       tmp102: tmp102@48 {
-               compatible = "ti,tmp102";
-               reg = <0x48>;
-               interrupt-parent = <&gpio7>;
-               interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-               #thermal-sensor-cells = <1>;
-       };
-
-       tlv320aic3104: tlv320aic3104@18 {
-               #sound-dai-cells = <0>;
-               compatible = "ti,tlv320aic3104";
-               reg = <0x18>;
-               assigned-clocks = <&clkoutmux2_clk_mux>;
-               assigned-clock-parents = <&sys_clk2_dclk_div>;
-
-               status = "okay";
-               adc-settle-ms = <40>;
-
-               AVDD-supply = <&vdd_3v3>;
-               IOVDD-supply = <&vdd_3v3>;
-               DRVDD-supply = <&vdd_3v3>;
-               DVDD-supply = <&aic_dvdd>;
-       };
-
-       eeprom: eeprom@50 {
-               compatible = "at,24c32";
-               reg = <0x50>;
-       };
 };
 
-&i2c3 {
-       status = "okay";
-       clock-frequency = <400000>;
-
-       mcp_rtc: rtc@6f {
-               compatible = "microchip,mcp7941x";
-               reg = <0x6f>;
-               interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
-                                     <&dra7_pmx_core 0x424>;
-               interrupt-names = "irq", "wakeup";
-
-               vcc-supply = <&vdd_3v3>;
-               wakeup-source;
-       };
-};
-
-&gpio7 {
-       ti,no-reset-on-init;
-       ti,no-idle-on-init;
-};
-
-&cpu0 {
-       cpu0-supply = <&smps12_reg>;
-       voltage-tolerance = <1>;
-};
-
-&uart3 {
-       status = "okay";
-       interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-                             <&dra7_pmx_core 0x3f8>;
-};
-
-&mac {
-       status = "okay";
-       dual_emac;
-};
-
-&cpsw_emac0 {
-       phy_id = <&davinci_mdio>, <1>;
-       phy-mode = "rgmii";
-       dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-       phy_id = <&davinci_mdio>, <2>;
-       phy-mode = "rgmii";
-       dual_emac_res_vlan = <2>;
+&tpd12s015 {
+       gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
+               <&gpio6 28 GPIO_ACTIVE_HIGH>,   /* gpio6_28, LS OE */
+               <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
 };
 
 &mmc1 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins_default>;
-
        vmmc-supply = <&ldo1_reg>;
-       bus-width = <4>;
-       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
-&mmc2 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins_default>;
-
-       vmmc-supply = <&vdd_3v3>;
-       bus-width = <8>;
-       ti,non-removable;
-       cap-mmc-dual-data-rate;
-};
-
-&sata {
-       status = "okay";
-};
-
-&usb2_phy1 {
-       phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-       phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-       dr_mode = "host";
-};
-
-&omap_dwc3_2 {
-       extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-       /*
-        * Stand alone usage is peripheral only.
-        * However, with some resistor modifications
-        * this port can be used via expansion connectors
-        * as "host" or "dual-role". If so, provide
-        * the necessary dr_mode override in the expansion
-        * board's DT.
-        */
-       dr_mode = "peripheral";
-};
-
-&cpu_trips {
-       cpu_alert1: cpu_alert1 {
-               temperature = <50000>; /* millicelsius */
-               hysteresis = <2000>; /* millicelsius */
-               type = "active";
-       };
-};
-
-&cpu_cooling_maps {
-       map1 {
-               trip = <&cpu_alert1>;
-               cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-       };
-};
-
-&thermal_zones {
-       board_thermal: board_thermal {
-               polling-delay-passive = <1250>; /* milliseconds */
-               polling-delay = <1500>; /* milliseconds */
-
-                               /* sensor       ID */
-               thermal-sensors = <&tmp102     0>;
-
-               board_trips: trips {
-                       board_alert0: board_alert {
-                               temperature = <40000>; /* millicelsius */
-                               hysteresis = <2000>; /* millicelsius */
-                               type = "active";
-                       };
-
-                       board_crit: board_crit {
-                               temperature = <105000>; /* millicelsius */
-                               hysteresis = <0>; /* millicelsius */
-                               type = "critical";
-                       };
-               };
-
-               board_cooling_maps: cooling-maps {
-                       map0 {
-                               trip = <&board_alert0>;
-                               cooling-device =
-                                 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-                       };
-               };
-       };
-};
-
-&dss {
-       status = "ok";
-
-       vdda_video-supply = <&ldoln_reg>;
-};
-
-&hdmi {
-       status = "ok";
-       vdda-supply = <&ldo4_reg>;
-
-       port {
-               hdmi_out: endpoint {
-                       remote-endpoint = <&tpd12s015_in>;
-               };
-       };
-};
-
-&pcie1 {
-       gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
-&mcasp3 {
-       #sound-dai-cells = <0>;
-       assigned-clocks = <&mcasp3_ahclkx_mux>;
-       assigned-clock-parents = <&sys_clkin2>;
-       status = "okay";
-
-       op-mode = <0>;  /* MCASP_IIS_MODE */
-       tdm-slots = <2>;
-       /* 4 serializers */
-       serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-               1 2 0 0
-       >;
-       tx-num-evt = <32>;
-       rx-num-evt = <32>;
-};
-
-&mailbox5 {
-       status = "okay";
-       mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-               status = "okay";
-       };
-       mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-               status = "okay";
-       };
-};
-
-&mailbox6 {
-       status = "okay";
-       mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-               status = "okay";
-       };
-       mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-               status = "okay";
-       };
 };