gpe1F: 0 invalid
gpe_all: 1192
sci: 1194
+ sci_not: 0
- sci - The total number of times the ACPI SCI
- has claimed an interrupt.
+ sci - The number of times the ACPI SCI
+ has been called and claimed an interrupt.
+
+ sci_not - The number of times the ACPI SCI
+ has been called and NOT claimed an interrupt.
gpe_all - count of SCI caused by GPEs.
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
mac80211.xml debugobjects.xml sh.xml regulator.xml \
- alsa-driver-api.xml writing-an-alsa-driver.xml
+ alsa-driver-api.xml writing-an-alsa-driver.xml \
+ tracepoint.xml
###
# The build process is as follows (targets):
$(call cmd,db2pdf)
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
build_main_index = rm -rf $(main_idx) && \
echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
- $(C-procfs-example)
+ $(C-procfs-example) $(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
!Edrivers/pci/pci.c
!Edrivers/pci/pci-driver.c
!Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
!Edrivers/pci/search.c
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
!Edrivers/pci/rom.c
!Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Tracepoints">
+ <bookinfo>
+ <title>The Linux Kernel Tracepoint API</title>
+
+ <authorgroup>
+ <author>
+ <firstname>Jason</firstname>
+ <surname>Baron</surname>
+ <affiliation>
+ <address>
+ <email>jbaron@redhat.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+ </para>
+
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+ </para>
+
+ <para>
+ For more details see the file COPYING in the source
+ distribution of Linux.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+ <chapter id="intro">
+ <title>Introduction</title>
+ <para>
+ Tracepoints are static probe points that are located in strategic points
+ throughout the kernel. 'Probes' register/unregister with tracepoints
+ via a callback mechanism. The 'probes' are strictly typed functions that
+ are passed a unique set of parameters defined by each tracepoint.
+ </para>
+
+ <para>
+ From this simple callback mechanism, 'probes' can be used to profile, debug,
+ and understand kernel behavior. There are a number of tools that provide a
+ framework for using 'probes'. These tools include Systemtap, ftrace, and
+ LTTng.
+ </para>
+
+ <para>
+ Tracepoints are defined in a number of header files via various macros. Thus,
+ the purpose of this document is to provide a clear accounting of the available
+ tracepoints. The intention is to understand not only what tracepoints are
+ available but also to understand where future tracepoints might be added.
+ </para>
+
+ <para>
+ The API presented has functions of the form:
+ <function>trace_tracepointname(function parameters)</function>. These are the
+ tracepoints callbacks that are found throughout the code. Registering and
+ unregistering probes with these callback sites is covered in the
+ <filename>Documentation/trace/*</filename> directory.
+ </para>
+ </chapter>
+
+ <chapter id="irq">
+ <title>IRQ</title>
+!Iinclude/trace/events/irq.h
+ </chapter>
+
+</book>
BKL mmap_sem PageLocked(page)
open: no yes
close: no yes
-fault: no yes
-page_mkwrite: no yes no
+fault: no yes can return with page locked
+page_mkwrite: no yes can return with page locked
access: no yes
- ->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+ ->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+ ->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through
==================
CacheFiles makes use of the split security in the task_struct. It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
when it acts on behalf of another process, in that process's context.
The reason it does this is that it calls vfs_mkdir() and suchlike rather than
the process looks like in /proc.
So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as). The
-objective security holds the intrinsic security properties of a process and is
-never overridden. This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden. This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).
--- /dev/null
+BCM5974 Driver (bcm5974)
+------------------------
+ Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+ Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+ Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/
--- /dev/null
+Multi-touch (MT) Protocol
+-------------------------
+ Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation. The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.
- this file (info on ISDN implementation for Linux)
CREDITS
- list of the kind folks that brought you this stuff.
+HiSax.cert
+ - information about the ITU approval certification of the HiSax driver.
INTERFACE
- - description of Linklevel and Hardwarelevel ISDN interface.
+ - description of isdn4linux Link Level and Hardware Level interfaces.
+INTERFACE.fax
+ - description of the fax subinterface of isdn4linux.
+INTERFACE.CAPI
+ - description of kernel CAPI Link Level to Hardware Level interface.
README
- general info on what you need and what to do for Linux ISDN.
README.FAQ
- info for running audio over ISDN.
README.fax
- info for using Fax over ISDN.
+README.gigaset
+ - info on the drivers for Siemens Gigaset ISDN adapters.
README.icn
- info on the ICN-ISDN-card and its driver.
README.HiSax
README.sc
- info on driver for Spellcaster cards.
README.x25
- _ info for running X.25 over ISDN.
+ - info for running X.25 over ISDN.
README.hysdn
- - info on driver for Hypercope active HYSDN cards
-
+ - info on driver for Hypercope active HYSDN cards
+README.mISDN
+ - info on the Modular ISDN subsystem (mISDN).
--- /dev/null
+Kernel CAPI Interface to Hardware Drivers
+-----------------------------------------
+
+1. Overview
+
+From the CAPI 2.0 specification:
+COMMON-ISDN-API (CAPI) is an application programming interface standard used
+to access ISDN equipment connected to basic rate interfaces (BRI) and primary
+rate interfaces (PRI).
+
+Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
+hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
+lingo) with Kernel CAPI to indicate their readiness to provide their service
+to CAPI applications. CAPI applications also register with Kernel CAPI,
+requesting association with a CAPI device. Kernel CAPI then dispatches the
+application registration to an available device, forwarding it to the
+corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
+directions between the application and the hardware driver.
+
+Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
+This standard is freely available from http://www.capi.org.
+
+
+2. Driver and Device Registration
+
+CAPI drivers optionally register themselves with Kernel CAPI by calling the
+Kernel CAPI function register_capi_driver() with a pointer to a struct
+capi_driver. This structure must be filled with the name and revision of the
+driver, and optionally a pointer to a callback function, add_card(). The
+registration can be revoked by calling the function unregister_capi_driver()
+with a pointer to the same struct capi_driver.
+
+CAPI drivers must register each of the ISDN devices they control with Kernel
+CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
+struct capi_ctr before they can be used. This structure must be filled with
+the names of the driver and controller, and a number of callback function
+pointers which are subsequently used by Kernel CAPI for communicating with the
+driver. The registration can be revoked by calling the function
+detach_capi_ctr() with a pointer to the same struct capi_ctr.
+
+Before the device can be actually used, the driver must fill in the device
+information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
+structure of the device, and signal its readiness by calling capi_ctr_ready().
+From then on, Kernel CAPI may call the registered callback functions for the
+device.
+
+If the device becomes unusable for any reason (shutdown, disconnect ...), the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
+callback functions by Kernel CAPI.
+
+
+3. Application Registration and Communication
+
+Kernel CAPI forwards registration requests from applications (calls to CAPI
+operation CAPI_REGISTER) to an appropriate hardware driver by calling its
+register_appl() callback function. A unique Application ID (ApplID, u16) is
+allocated by Kernel CAPI and passed to register_appl() along with the
+parameter structure provided by the application. This is analogous to the
+open() operation on regular files or character devices.
+
+After a successful return from register_appl(), CAPI messages from the
+application may be passed to the driver for the device via calls to the
+send_message() callback function. The CAPI message to send is stored in the
+data portion of an skb. Conversely, the driver may call Kernel CAPI's
+capi_ctr_handle_message() function to pass a received CAPI message to Kernel
+CAPI for forwarding to an application, specifying its ApplID.
+
+Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
+forwarded as calls to the release_appl() callback function, passing the same
+ApplID as with register_appl(). After return from release_appl(), no CAPI
+messages for that application may be passed to or from the device anymore.
+
+
+4. Data Structures
+
+4.1 struct capi_driver
+
+This structure describes a Kernel CAPI driver itself. It is used in the
+register_capi_driver() and unregister_capi_driver() functions, and contains
+the following non-private fields, all to be set by the driver before calling
+register_capi_driver():
+
+char name[32]
+ the name of the driver, as a zero-terminated ASCII string
+char revision[32]
+ the revision number of the driver, as a zero-terminated ASCII string
+int (*add_card)(struct capi_driver *driver, capicardparams *data)
+ a callback function pointer (may be NULL)
+
+
+4.2 struct capi_ctr
+
+This structure describes an ISDN device (controller) handled by a Kernel CAPI
+driver. After registration via the attach_capi_ctr() function it is passed to
+all controller specific lower layer interface and callback functions to
+identify the controller to operate on.
+
+It contains the following non-private fields:
+
+- to be set by the driver before calling attach_capi_ctr():
+
+struct module *owner
+ pointer to the driver module owning the device
+
+void *driverdata
+ an opaque pointer to driver specific data, not touched by Kernel CAPI
+
+char name[32]
+ the name of the controller, as a zero-terminated ASCII string
+
+char *driver_name
+ the name of the driver, as a zero-terminated ASCII string
+
+int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
+ (optional) pointer to a callback function for sending firmware and
+ configuration data to the device
+
+void (*reset_ctr)(struct capi_ctr *ctrlr)
+ pointer to a callback function for performing a reset on the device,
+ releasing all registered applications
+
+void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
+ capi_register_params *rparam)
+void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
+ pointers to callback functions for registration and deregistration of
+ applications with the device
+
+u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
+ pointer to a callback function for sending a CAPI message to the
+ device
+
+char *(*procinfo)(struct capi_ctr *ctrlr)
+ pointer to a callback function returning the entry for the device in
+ the CAPI controller info table, /proc/capi/controller
+
+read_proc_t *ctr_read_proc
+ pointer to the read_proc callback function for the device's proc file
+ system entry, /proc/capi/controllers/<n>; will be called with a
+ pointer to the device's capi_ctr structure as the last (data) argument
+
+- to be filled in before calling capi_ctr_ready():
+
+u8 manu[CAPI_MANUFACTURER_LEN]
+ value to return for CAPI_GET_MANUFACTURER
+
+capi_version version
+ value to return for CAPI_GET_VERSION
+
+capi_profile profile
+ value to return for CAPI_GET_PROFILE
+
+u8 serial[CAPI_SERIAL_LEN]
+ value to return for CAPI_GET_SERIAL
+
+
+5. Lower Layer Interface Functions
+
+(declared in <linux/isdn/capilli.h>)
+
+void register_capi_driver(struct capi_driver *drvr)
+void unregister_capi_driver(struct capi_driver *drvr)
+ register/unregister a driver with Kernel CAPI
+
+int attach_capi_ctr(struct capi_ctr *ctrlr)
+int detach_capi_ctr(struct capi_ctr *ctrlr)
+ register/unregister a device (controller) with Kernel CAPI
+
+void capi_ctr_ready(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
+ signal controller ready/not ready
+
+void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
+void capi_ctr_resume_output(struct capi_ctr *ctrlr)
+ signal suspend/resume
+
+void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
+ struct sk_buff *skb)
+ pass a received CAPI message to Kernel CAPI
+ for forwarding to the specified application
+
+
+6. Helper Functions and Macros
+
+Library functions (from <linux/isdn/capilli.h>):
+
+void capilib_new_ncci(struct list_head *head, u16 applid,
+ u32 ncci, u32 winsize)
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
+void capilib_release_appl(struct list_head *head, u16 applid)
+void capilib_release(struct list_head *head)
+void capilib_data_b3_conf(struct list_head *head, u16 applid,
+ u32 ncci, u16 msgid)
+u16 capilib_data_b3_req(struct list_head *head, u16 applid,
+ u32 ncci, u16 msgid)
+
+
+Macros to extract/set element values from/in a CAPI message header
+(from <linux/isdn/capiutil.h>):
+
+Get Macro Set Macro Element (Type)
+
+CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16)
+CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16)
+CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8)
+CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8)
+CAPIMSG_CMD(m) - Command*256
+ + Subcommand (u16)
+CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16)
+
+CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI
+ (u32)
+CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16)
+
Inside a struct description, you can use the "private:" and "public:"
comment tags. Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation. The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker. They may optionally include comments between the ":" and the
+ending "*/" marker.
Example:
struct my_struct {
int a;
int b;
-/* private: */
+/* private: internal use only */
int c;
};
nowb [ARM]
+ nox2apic [X86-64,APIC] Do not enable x2APIC mode.
+
nptcg= [IA64] Override max number of concurrent global TLB
purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
ThinkPad ACPI Extras Driver
- Version 0.22
- November 23rd, 2008
+ Version 0.23
+ April 10th, 2009
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
- '.' acquired while irqs disabled
- '+' acquired in irq context
- '-' acquired with irqs enabled
+ '.' acquired while irqs disabled and not in irq context
+ '-' acquired in irq context
+ '+' acquired with irqs enabled
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:xlink="http://www.w3.org/1999/xlink"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- width="1771.6534"
- height="1417.3228"
- id="svg2"
- sodipodi:version="0.32"
- inkscape:version="0.46"
- sodipodi:docname="tuz.svg"
- inkscape:output_extension="org.inkscape.output.svg.inkscape"
- version="1.0"
- style="display:inline;enable-background:new"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
- inkscape:export-xdpi="100.03588"
- inkscape:export-ydpi="100.03588">
- <sodipodi:namedview
- id="base"
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1.0"
- gridtolerance="10000"
- guidetolerance="10"
- objecttolerance="10"
- inkscape:pageopacity="0.0"
- inkscape:pageshadow="2"
- inkscape:zoom="0.25"
- inkscape:cx="-174.7931"
- inkscape:cy="784.26325"
- inkscape:document-units="px"
- inkscape:current-layer="svg2"
- showgrid="false"
- inkscape:window-width="1280"
- inkscape:window-height="823"
- inkscape:window-x="-4"
- inkscape:window-y="25"
- showguides="true"
- inkscape:guide-bbox="true"
- units="mm" />
- <defs
- id="defs4">
- <filter
- inkscape:collect="always"
- x="-0.084654994"
- width="1.16931"
- y="-0.36592469"
- height="1.7318494"
- id="filter11361">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.5740586"
- id="feGaussianBlur11363" />
- </filter>
- <inkscape:perspective
- sodipodi:type="inkscape:persp3d"
- inkscape:vp_x="0 : 564.0976 : 1"
- inkscape:vp_y="0 : 1000 : 0"
- inkscape:vp_z="1445.8591 : 564.0976 : 1"
- inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
- id="perspective8145" />
- <linearGradient
- id="linearGradient7622">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop7624" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop7626" />
- </linearGradient>
- <linearGradient
- id="linearGradient4113">
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="0"
- id="stop4115" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop4117" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient3660">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3662" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop3664" />
- </linearGradient>
- <linearGradient
- id="linearGradient3627">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3629" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3631" />
- </linearGradient>
- <linearGradient
- id="linearGradient2843">
- <stop
- id="stop2845"
- offset="0"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.02188784"
- id="stop2847" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.75866222"
- id="stop2849" />
- <stop
- id="stop2851"
- offset="0.88508981"
- style="stop-color:#232323;stop-opacity:1;" />
- <stop
- id="stop2853"
- offset="1"
- style="stop-color:#595959;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient8964">
- <stop
- style="stop-color:#1a1a1a;stop-opacity:1;"
- offset="0"
- id="stop8966" />
- <stop
- style="stop-color:#1a1a1a;stop-opacity:0;"
- offset="1"
- id="stop8968" />
- </linearGradient>
- <linearGradient
- id="linearGradient8952">
- <stop
- style="stop-color:#0a0c0c;stop-opacity:1;"
- offset="0"
- id="stop8954" />
- <stop
- style="stop-color:#1f2727;stop-opacity:0;"
- offset="1"
- id="stop8956" />
- </linearGradient>
- <linearGradient
- id="linearGradient8430">
- <stop
- style="stop-color:#1e2323;stop-opacity:1;"
- offset="0"
- id="stop8432" />
- <stop
- id="stop8438"
- offset="0.55992389"
- style="stop-color:#181d1d;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8434" />
- </linearGradient>
- <linearGradient
- id="linearGradient8398">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop8400" />
- <stop
- id="stop8402"
- offset="0.5125587"
- style="stop-color:#1e2424;stop-opacity:0;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8404" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4870">
- <stop
- style="stop-color:#c7bd80;stop-opacity:1;"
- offset="0"
- id="stop4872" />
- <stop
- style="stop-color:#c7bd80;stop-opacity:0;"
- offset="1"
- id="stop4874" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4862">
- <stop
- style="stop-color:#e2e2e2;stop-opacity:1;"
- offset="0"
- id="stop4864" />
- <stop
- style="stop-color:#e2e2e2;stop-opacity:0;"
- offset="1"
- id="stop4866" />
- </linearGradient>
- <linearGradient
- id="linearGradient4478">
- <stop
- style="stop-color:#f9eed3;stop-opacity:1;"
- offset="0"
- id="stop4480" />
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="1"
- id="stop4482" />
- </linearGradient>
- <linearGradient
- id="linearGradient4106">
- <stop
- style="stop-color:#d9e002;stop-opacity:1;"
- offset="0"
- id="stop4108" />
- <stop
- id="stop4114"
- offset="0.5"
- style="stop-color:#a9ae01;stop-opacity:1;" />
- <stop
- style="stop-color:#717501;stop-opacity:1;"
- offset="1"
- id="stop4110" />
- </linearGradient>
- <linearGradient
- id="linearGradient4084">
- <stop
- style="stop-color:#7d7d00;stop-opacity:1;"
- offset="0"
- id="stop4086" />
- <stop
- id="stop4088"
- offset="0.3636601"
- style="stop-color:#c6c700;stop-opacity:1;" />
- <stop
- style="stop-color:#f6f800;stop-opacity:1;"
- offset="1"
- id="stop4090" />
- </linearGradient>
- <linearGradient
- id="linearGradient4041">
- <stop
- id="stop4043"
- offset="0"
- style="stop-color:#ffff00;stop-opacity:1;" />
- <stop
- id="stop4045"
- offset="1"
- style="stop-color:#ffff00;stop-opacity:0;" />
- </linearGradient>
- <linearGradient
- id="linearGradient4025">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop4027" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop4031" />
- </linearGradient>
- <linearGradient
- id="linearGradient4013">
- <stop
- style="stop-color:#ffff00;stop-opacity:1;"
- offset="0"
- id="stop4015" />
- <stop
- style="stop-color:#b2b200;stop-opacity:1;"
- offset="1"
- id="stop4017" />
- </linearGradient>
- <linearGradient
- id="linearGradient3985">
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0"
- id="stop3987" />
- <stop
- style="stop-color:#1d1d1d;stop-opacity:1;"
- offset="1"
- id="stop3989" />
- </linearGradient>
- <linearGradient
- id="linearGradient3961">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop3963" />
- <stop
- id="stop3965"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3967" />
- </linearGradient>
- <linearGradient
- id="linearGradient3951">
- <stop
- id="stop3953"
- offset="0"
- style="stop-color:#344040;stop-opacity:1;" />
- <stop
- style="stop-color:#222929;stop-opacity:1;"
- offset="0.5"
- id="stop3955" />
- <stop
- id="stop3957"
- offset="1"
- style="stop-color:#000000;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3909">
- <stop
- style="stop-color:#283131;stop-opacity:1;"
- offset="0"
- id="stop3911" />
- <stop
- id="stop3917"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3913" />
- </linearGradient>
- <linearGradient
- id="linearGradient3537">
- <stop
- style="stop-color:#ada469;stop-opacity:1;"
- offset="0"
- id="stop3539" />
- <stop
- id="stop3545"
- offset="0.81132078"
- style="stop-color:#ada469;stop-opacity:1;" />
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="1"
- id="stop3541" />
- </linearGradient>
- <linearGradient
- id="linearGradient3317">
- <stop
- style="stop-color:#cfc690;stop-opacity:1"
- offset="0"
- id="stop3319" />
- <stop
- id="stop3321"
- offset="0.21161865"
- style="stop-color:#afa775;stop-opacity:1;" />
- <stop
- id="stop3323"
- offset="0.53408515"
- style="stop-color:#615c3a;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.76504093"
- id="stop3325" />
- <stop
- id="stop3327"
- offset="1"
- style="stop-color:#403518;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3239">
- <stop
- id="stop3251"
- offset="0"
- style="stop-color:#cfc690;stop-opacity:1;" />
- <stop
- style="stop-color:#afa775;stop-opacity:1;"
- offset="0.21161865"
- id="stop3267" />
- <stop
- style="stop-color:#615c3a;stop-opacity:1;"
- offset="0.53408515"
- id="stop3261" />
- <stop
- id="stop3265"
- offset="0.76504093"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#403518;stop-opacity:1;"
- offset="1"
- id="stop3243" />
- </linearGradient>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3239"
- id="radialGradient3281"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
- spreadMethod="pad"
- cx="806.52582"
- cy="212.68117"
- fx="806.52582"
- fy="212.68117"
- r="48.363216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient3315"
- cx="543.6698"
- cy="147.3131"
- fx="543.6698"
- fy="147.3131"
- r="47.863216"
- gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3537"
- id="radialGradient3543"
- cx="385"
- cy="237.00504"
- fx="385"
- fy="237.00504"
- r="86.928574"
- gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3909"
- id="radialGradient3915"
- cx="418.30365"
- cy="342.47794"
- fx="418.30365"
- fy="342.47794"
- r="131.4509"
- gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3951"
- id="radialGradient3933"
- cx="397.16388"
- cy="336.95245"
- fx="397.16388"
- fy="336.95245"
- r="36.75"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3961"
- id="linearGradient3959"
- x1="398.21429"
- y1="343.52289"
- x2="379.28571"
- y2="265.30862"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter3981"
- x="-0.30000001"
- width="1.6"
- y="-0.30000001"
- height="1.6">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2"
- id="feGaussianBlur3983" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3985"
- id="radialGradient3991"
- cx="402.48898"
- cy="317.23578"
- fx="402.48898"
- fy="317.23578"
- r="23.714285"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3999">
- <path
- style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
- id="path4001"
- sodipodi:nodetypes="czzczzzzc" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient4056"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4041"
- id="radialGradient4060"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4025"
- id="radialGradient4062"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient4082"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4100">
- <path
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
- id="path4102"
- sodipodi:nodetypes="ccccccc" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4106"
- id="radialGradient4112"
- cx="250.22678"
- cy="475.09763"
- fx="250.22678"
- fy="475.09763"
- r="95.98877"
- gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4484"
- x1="412.08926"
- y1="404.91574"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4486"
- x1="411.91071"
- y1="404.91577"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4488"
- x1="411.91071"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4490"
- x1="412.08926"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4492"
- x1="411.73212"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4862"
- id="radialGradient4868"
- cx="429.56738"
- cy="377.42877"
- fx="429.56738"
- fy="377.42877"
- r="72.079735"
- gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4870"
- id="radialGradient4876"
- cx="437.6991"
- cy="391.21735"
- fx="437.6991"
- fy="391.21735"
- r="36.611931"
- gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient3585"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient3587"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient8410"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient8412"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8514">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8516"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8604">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8606"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8610">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8612"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8616">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8618"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8622">
- <path
- style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
- id="path8624"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8642">
- <path
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
- id="path8644"
- sodipodi:nodetypes="czzcczcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8658">
- <path
- style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
- id="path8660"
- sodipodi:nodetypes="czzzcczzcc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8802"
- x="-0.35311759"
- width="1.7062352"
- y="-0.1817714"
- height="1.3635428">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="48.038491"
- id="feGaussianBlur8804" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8806"
- x="-0.61142862"
- width="2.2228572"
- y="-0.14930232"
- height="1.2986046">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="37.830213"
- id="feGaussianBlur8808" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8810"
- x="-0.23519406"
- width="1.4703881"
- y="-0.24500646"
- height="1.4900129">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="58.328041"
- id="feGaussianBlur8812" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8814"
- x="-0.20466694"
- width="1.4093339"
- y="-0.29007819"
- height="1.5801564">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="22.300169"
- id="feGaussianBlur8816" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8818"
- x="-0.34381232"
- width="1.6876246"
- y="-0.18433961"
- height="1.3686792">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="34.542167"
- id="feGaussianBlur8820" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8822"
- x="-0.2742857"
- width="1.5485713"
- y="-0.21333334"
- height="1.4266667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="11.313708"
- id="feGaussianBlur8824" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8826"
- x="-0.25894088"
- width="1.5178818"
- y="-0.2236412"
- height="1.4472824">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.631544"
- id="feGaussianBlur8828" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8856"
- x="-0.3253231"
- width="1.6506462"
- y="-0.19013336"
- height="1.3802667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="28.712591"
- id="feGaussianBlur8858" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8860"
- x="-0.38093024"
- width="1.7618605"
- y="-0.17518716"
- height="1.3503743">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.304015"
- id="feGaussianBlur8862" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8888"
- x="-0.2112188"
- width="1.4224375"
- y="-0.16808605"
- height="1.3361721">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.3693583"
- id="feGaussianBlur8890" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8892"
- x="-0.18692794"
- width="1.3738559"
- y="-0.23646873"
- height="1.4729375">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="31.21228"
- id="feGaussianBlur8894" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8906">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8908"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8940"
- x="-0.25152978"
- width="1.5030596"
- y="-0.053035267"
- height="1.1060705">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="13.024603"
- id="feGaussianBlur8942" />
- </filter>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8952"
- id="linearGradient8958"
- x1="609.31244"
- y1="239.46866"
- x2="560.83142"
- y2="262.86206"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8964"
- id="linearGradient8970"
- x1="603.84064"
- y1="627.85303"
- x2="616.24396"
- y2="585.42664"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter9020"
- x="-0.32861114"
- width="1.6572223"
- y="-0.182"
- height="1.364">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9022" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9024"
- x="-0.55453134"
- width="2.1090627"
- y="-0.51434779"
- height="2.0286956">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9026" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9044"
- x="-0.32631579"
- width="1.6526316"
- y="-0.84545463"
- height="2.6909094">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9046" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9048"
- x="-0.40879121"
- width="1.8175824"
- y="-0.71538466"
- height="2.4307692">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9050" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3587"
- x="-0.1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.881432"
- id="feGaussianBlur3589" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3602">
- <path
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- id="path3604"
- d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
- style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4120"
- x="-0.2770822"
- width="1.5541644"
- y="-0.32482043"
- height="1.6496409">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.956289"
- id="feGaussianBlur4122" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3631">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- id="path3633"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3665">
- <path
- sodipodi:nodetypes="czzcczcc"
- id="path3667"
- d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3677">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
- id="path3679"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3898">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.892985"
- id="feGaussianBlur3900" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4130"
- x="-0.49509686"
- width="1.9901937"
- y="-0.26708817"
- height="1.5341763">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.730622"
- id="feGaussianBlur4132" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4141"
- x="-0.40611032"
- width="1.8122206"
- y="-0.30260596"
- height="1.6052119">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="9.8586086"
- id="feGaussianBlur4143" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4177">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path4179"
- d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4185">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.6164709"
- id="feGaussianBlur4187" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4105">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.8640966"
- id="feGaussianBlur4107" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath2833">
- <path
- style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
- id="path2835"
- sodipodi:nodetypes="czzzcczzcc" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient2843"
- id="linearGradient2841"
- gradientUnits="userSpaceOnUse"
- x1="347.89655"
- y1="1070.2124"
- x2="275.58191"
- y2="867.97992" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3627"
- id="linearGradient3688"
- gradientUnits="userSpaceOnUse"
- x1="699.32867"
- y1="269.76755"
- x2="698.97504"
- y2="346.1351" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask3684">
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path3686"
- sodipodi:cx="579.474"
- sodipodi:cy="260.57516"
- sodipodi:rx="192.6866"
- sodipodi:ry="164.04877"
- d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
- transform="translate(-174.03125,62.156036)" />
- </mask>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3622">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
- id="path3624"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3636">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- id="path3638"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3660"
- id="linearGradient3666"
- x1="1255.7386"
- y1="667.09216"
- x2="893.69995"
- y2="858.01099"
- gradientUnits="userSpaceOnUse" />
- <filter
- inkscape:collect="always"
- id="filter3779"
- x="-0.087980822"
- width="1.1759616"
- y="-0.17728332"
- height="1.3545666">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="16.340344"
- id="feGaussianBlur3781" />
- </filter>
- <filter
- id="filter3785"
- inkscape:label="White Fur">
- <feTurbulence
- id="feTurbulence3787"
- in="SourceAlpha"
- type="fractalNoise"
- baseFrequency="0.24044943820224721"
- numOctaves="10"
- seed="655"
- result="result0" />
- <feDisplacementMap
- id="feDisplacementMap3789"
- in="SourceGraphic"
- in2="result0"
- scale="62"
- xChannelSelector="B"
- yChannelSelector="G" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3677">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.0397518"
- id="feGaussianBlur3679" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3722">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3724"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3986">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3988"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3992">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3994"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3998">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
- id="path4000"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4002"
- x="-0.24334238"
- width="1.4866848"
- y="-0.39104807"
- height="1.7820961">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="14.589518"
- id="feGaussianBlur4004" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4010"
- x="-0.14577261"
- width="1.2915452"
- y="-0.23523259"
- height="1.4704652">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.4442907"
- id="feGaussianBlur4012" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4053">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.6062947"
- id="feGaussianBlur4055" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4079">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.5887624"
- id="feGaussianBlur4081" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4083">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.5052066"
- id="feGaussianBlur4085" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4113"
- id="radialGradient4119"
- cx="296.33783"
- cy="427.17749"
- fx="296.33783"
- fy="427.17749"
- r="19.704132"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
- <filter
- inkscape:collect="always"
- id="filter6949"
- x="-0.10294895"
- width="1.2058979"
- y="-0.34224695"
- height="1.6844939">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6951" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6953"
- x="-0.098320946"
- width="1.1966419"
- y="-0.19750816"
- height="1.3950163">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6955" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6957"
- x="-0.098213427"
- width="1.1964267"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6959" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6961"
- x="-0.09919104"
- width="1.1983821"
- y="-0.22643611"
- height="1.4528722">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6963" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6965"
- x="-0.099081434"
- width="1.1981629"
- y="-0.22529824"
- height="1.4505965">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6967" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6969"
- x="-0.10450897"
- width="1.2090179"
- y="-0.40468886"
- height="1.8093777">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6971" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6973"
- x="-0.10330495"
- width="1.2066098"
- y="-0.36439717"
- height="1.7287945">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6975" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6977"
- x="-0.10224481"
- width="1.2044896"
- y="-0.32371372"
- height="1.6474274">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6979" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6981"
- x="-0.10052545"
- width="1.2010509"
- y="-0.2742162"
- height="1.5484324">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6983" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6985"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20853186"
- height="1.4170637">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6987" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6989"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20287035"
- height="1.4057407">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6991" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6993"
- x="-0.098213255"
- width="1.1964265"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6995" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6997">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6999" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7001">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur7003" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7285"
- x="-0.030884685"
- width="1.0617694"
- y="-0.10267408"
- height="1.2053483">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7287" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7289">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7291" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7293">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7295" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7297">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7299" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7301">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7303" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7305">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7307" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7309">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7311" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7313">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7315" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7317">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7319" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7321">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7323" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7325"
- x="-0.031352691"
- width="1.0627054"
- y="-0.12140666"
- height="1.2428133">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7327" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7329"
- x="-0.030991485"
- width="1.061983"
- y="-0.10931916"
- height="1.2186383">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7331" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7335" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7337">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7339" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7345">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.7233839"
- id="feGaussianBlur7347" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7421">
- <path
- sodipodi:type="inkscape:offset"
- inkscape:radius="0"
- inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
- style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- id="path7423"
- d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
- transform="translate(8.0045714e-2,-3.125e-2)" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7578"
- x="-0.08160872"
- width="1.1632174"
- y="-0.22659944"
- height="1.4531989">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.437399"
- id="feGaussianBlur7580" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7594"
- x="-0.040804356"
- width="1.0816087"
- y="-0.11329972"
- height="1.2265995">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.2186995"
- id="feGaussianBlur7596" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7606">
- <path
- id="path7608"
- d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
- style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7610"
- x="-0.021942979"
- width="1.0438859"
- y="-0.10017137"
- height="1.2003427">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.57530213"
- id="feGaussianBlur7612" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7616">
- <path
- id="path7618"
- d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
- style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient7622"
- id="linearGradient7708"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(-19.091883,4.2426407)"
- x1="774.97668"
- y1="-211.87105"
- x2="755.11584"
- y2="-202.67865" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask7704">
- <path
- style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
- id="path7706" />
- </mask>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8430"
- id="radialGradient7904"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
- cx="142.95833"
- cy="107.09234"
- fx="142.95833"
- fy="107.09234"
- r="66.981766" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient7906"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient7908"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8209">
- <path
- sodipodi:nodetypes="czcc"
- id="path8211"
- d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
- style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8225">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.661912"
- id="feGaussianBlur8227" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.18"
- id="feGaussianBlur8335" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8338">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8340"
- d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8354">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.82"
- id="feGaussianBlur8356" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8359">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8361"
- d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8379"
- x="-0.14413793"
- width="1.288276"
- y="-0.10278689"
- height="1.2055738">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.389266"
- id="feGaussianBlur8381" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8392">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8394"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8404"
- x="-0.090268657"
- width="1.1805373"
- y="-0.10250848"
- height="1.205017">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="5.3457272"
- id="feGaussianBlur8406" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8417">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8419"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- </defs>
- <metadata
- id="metadata7">
- <rdf:RDF>
- <cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- </cc:Work>
- </rdf:RDF>
- </metadata>
- <g
- inkscape:groupmode="layer"
- id="layer1"
- inkscape:label="Shadow">
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
- d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
- id="path10326"
- sodipodi:nodetypes="cccccccccsccccccccccc"
- transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
- inkscape:export-xdpi="142.10527"
- inkscape:export-ydpi="142.10527" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer20"
- inkscape:label="New Ear">
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g7882"
- transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
- <path
- sodipodi:nodetypes="czzzzcc"
- id="path7876"
- d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
- style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <path
- sodipodi:nodetypes="czzzzzc"
- id="path7878"
- d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
- style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <path
- sodipodi:nodetypes="czccssc"
- id="path7880"
- d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
- style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </g>
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer21"
- inkscape:label="Rendered2"
- style="display:inline">
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
- id="path7917"
- sodipodi:nodetypes="czzzcczzcc" />
- <path
- style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
- d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
- id="path7919"
- clip-path="url(#clipPath8658)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
- d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
- id="path7923"
- clip-path="url(#clipPath2833)"
- sodipodi:nodetypes="cccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
- id="path7921"
- sodipodi:nodetypes="czzcczcc" />
- <path
- style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
- d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
- id="path7925"
- sodipodi:nodetypes="ccccccc"
- clip-path="url(#clipPath3665)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
- id="path7927"
- sodipodi:nodetypes="czzzzcc" />
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
- d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
- id="path7929"
- clip-path="url(#clipPath8642)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g7931"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-347.89063"
- inkscape:transform-center-y="-28.255779">
- <path
- style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
- id="path7933" />
- <g
- clip-path="url(#clipPath7616)"
- style="display:inline;filter:url(#filter7610);enable-background:new"
- id="g7935"
- transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
- <path
- sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
- id="path7937"
- d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- id="path7939"
- d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- sodipodi:nodetypes="cssccsscc" />
- <path
- id="path7941"
- d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- sodipodi:nodetypes="csccscc" />
- </g>
- <g
- clip-path="url(#clipPath7606)"
- id="g7943">
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
- d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
- id="path7945"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
- d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
- id="path7947"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- </g>
- </g>
- <path
- style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
- id="path7949"
- sodipodi:nodetypes="cscccccccccccc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
- d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
- id="path7951"
- sodipodi:nodetypes="ccccczzzcc"
- clip-path="url(#clipPath8616)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
- id="path7953"
- sodipodi:nodetypes="czcc" />
- <path
- style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
- d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
- id="path7955"
- sodipodi:nodetypes="cccc"
- clip-path="url(#clipPath8209)"
- transform="translate(276,136)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="opacity:1;display:inline;enable-background:new"
- id="g7957"
- clip-path="url(#clipPath3998)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677)"
- id="g7959">
- <g
- id="g7961"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7963"
- d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7965"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g7967"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzcc"
- id="path7969"
- d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7971"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="opacity:0.18000004;display:inline;enable-background:new"
- id="g7973">
- <g
- id="g7975"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7977"
- d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7979"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g7981"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzcc"
- id="path7983"
- d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7985"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
- d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
- id="path7987"
- clip-path="url(#clipPath8604)"
- sodipodi:nodetypes="cccccscc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
- id="path7989"
- sodipodi:nodetypes="czzzzzzc" />
- <path
- style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
- id="path7991"
- sodipodi:nodetypes="czzzzc" />
- <path
- sodipodi:type="arc"
- style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
- id="path7993"
- sodipodi:cx="385"
- sodipodi:cy="237.00504"
- sodipodi:rx="86.428574"
- sodipodi:ry="73.928574"
- d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
- transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
- clip-path="url(#clipPath4100)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
- id="path7995"
- sodipodi:nodetypes="csczzc"
- mask="url(#mask3684)" />
- <path
- style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
- id="path7997"
- sodipodi:nodetypes="czcc" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path7999"
- sodipodi:cx="409.28571"
- sodipodi:cy="306.64789"
- sodipodi:rx="36.25"
- sodipodi:ry="36.25"
- d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
- transform="translate(449.49554,74.915393)" />
- <path
- style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
- d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
- id="path8001"
- sodipodi:nodetypes="cccccccccc"
- clip-path="url(#clipPath8616)"
- transform="translate(276,136)" />
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
- d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
- id="path8003"
- sodipodi:nodetypes="czzcc" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8005"
- sodipodi:cx="410"
- sodipodi:cy="306.64789"
- sodipodi:rx="23.214285"
- sodipodi:ry="23.214285"
- d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
- transform="translate(449.67411,74.915393)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
- id="path8007"
- sodipodi:cx="414.28571"
- sodipodi:cy="303.07648"
- sodipodi:rx="7.5"
- sodipodi:ry="7.5"
- d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
- transform="translate(451.99554,73.486821)" />
- <path
- style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
- id="path8009"
- sodipodi:nodetypes="czzzczc" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g8011"
- transform="translate(780.74553,74.55825)">
- <path
- transform="translate(-329.81481,0)"
- clip-path="url(#clipPath3999)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8013"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
- style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
- <path
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
- d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
- sodipodi:ry="134.00607"
- sodipodi:rx="64.715881"
- sodipodi:cy="338.07648"
- sodipodi:cx="183.57143"
- id="path8015"
- style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
- d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
- sodipodi:ry="134.00607"
- sodipodi:rx="64.715881"
- sodipodi:cy="338.07648"
- sodipodi:cx="183.57143"
- id="path8017"
- style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(-329.81481,3e-7)"
- clip-path="url(#clipPath3999)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8019"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
- </g>
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8021"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(452.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
- id="path8023"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(450.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8025"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(450.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
- id="path8027"
- sodipodi:cx="429.56738"
- sodipodi:cy="377.42877"
- sodipodi:rx="72.079735"
- sodipodi:ry="44.547726"
- d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
- transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
- inkscape:transform-center-x="-47.231976"
- inkscape:transform-center-y="-3.6935079" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
- id="path8029"
- sodipodi:cx="437.6991"
- sodipodi:cy="391.21735"
- sodipodi:rx="36.611931"
- sodipodi:ry="22.627417"
- d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
- transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
- inkscape:transform-center-x="-20.955902"
- inkscape:transform-center-y="-13.056625" />
- <g
- transform="translate(450.03125,73.843964)"
- id="g8031"
- style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
- <path
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8033"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(13.125009,8.1249913)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8035"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(32.946437,7.4999913)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8037"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(24.910723,-10.267866)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8039"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(47.589294,-0.6250087)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8041"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- </g>
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
- id="path8043"
- sodipodi:nodetypes="ccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
- id="path8045"
- sodipodi:nodetypes="cccccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
- id="path8047"
- sodipodi:nodetypes="ccccccccccccc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
- d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
- id="path8049"
- clip-path="url(#clipPath8514)"
- transform="translate(276,136)" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
- id="path8051" />
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
- d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
- id="path8053"
- clip-path="url(#clipPath8610)"
- sodipodi:nodetypes="cccccscccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
- id="path8055"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
- d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
- id="path8057"
- clip-path="url(#clipPath8622)"
- sodipodi:nodetypes="cccccccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
- d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
- id="path8059"
- clip-path="url(#clipPath8906)"
- sodipodi:nodetypes="cczcccccc"
- transform="translate(276,136)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
- d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
- id="path8061"
- sodipodi:nodetypes="cccccccccccc"
- clip-path="url(#clipPath3602)" />
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
- id="path8063"
- sodipodi:nodetypes="czzzzzzzzcc" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
- d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
- id="path8065"
- sodipodi:nodetypes="czczzcc"
- clip-path="url(#clipPath3992)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="opacity:1;display:inline;enable-background:new"
- id="g8067"
- clip-path="url(#clipPath3986)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677)"
- id="g8069">
- <g
- style="filter:url(#filter3785)"
- id="g8071">
- <path
- sodipodi:nodetypes="czzccccc"
- id="path8073"
- d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8075"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="opacity:0.18000004;display:inline;enable-background:new"
- id="g8077">
- <g
- style="filter:url(#filter3785)"
- id="g8079">
- <path
- sodipodi:nodetypes="czzccccc"
- id="path8081"
- d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8083"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
- d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
- id="path8085"
- clip-path="url(#clipPath3722)"
- sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g8087"
- mask="url(#mask7704)"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-185.09603"
- inkscape:transform-center-y="-12.859654">
- <path
- transform="translate(8.0045714e-2,-3.125e-2)"
- style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
- id="path8089"
- sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
- <g
- clip-path="url(#clipPath7421)"
- id="g8091">
- <path
- id="path8093"
- d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- id="path8095"
- d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
- <path
- id="path8097"
- d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
- <path
- id="path8099"
- d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
- <path
- id="path8101"
- d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- id="path8103"
- d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
- <path
- id="path8105"
- d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
- <path
- id="path8107"
- d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
- <path
- id="path8109"
- d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
- <path
- id="path8111"
- d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
- <path
- id="path8113"
- d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
- <path
- id="path8115"
- d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
- <path
- id="path8117"
- d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
- <path
- id="path8119"
- d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
- <g
- id="g8121"
- style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8123"
- d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8125"
- d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8127"
- d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8129"
- d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8131"
- d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8133"
- d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8135"
- d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.9269042"
- inkscape:transform-center-x="13.64141"
- sodipodi:nodetypes="czzzczzc"
- id="path8137"
- d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.1542119"
- inkscape:transform-center-x="13.55068"
- sodipodi:nodetypes="czzzczzc"
- id="path8139"
- d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.4740887"
- inkscape:transform-center-x="13.41151"
- sodipodi:nodetypes="czzzczzc"
- id="path8141"
- d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.79376"
- inkscape:transform-center-x="13.258805"
- sodipodi:nodetypes="czzzczzc"
- id="path8143"
- d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8145"
- d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8147"
- d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8149"
- d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8151"
- d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8153"
- d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8155"
- d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8157"
- d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8159"
- d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8161"
- d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8163"
- d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.1360724"
- inkscape:transform-center-x="13.55813"
- sodipodi:nodetypes="czzzczzc"
- id="path8165"
- d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.6370147"
- inkscape:transform-center-x="13.74758"
- sodipodi:nodetypes="czzzczzc"
- id="path8167"
- d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.4842392"
- inkscape:transform-center-x="13.79933"
- sodipodi:nodetypes="czzzczzc"
- id="path8169"
- d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czczc"
- id="path8171"
- d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- </g>
- <path
- id="path8173"
- d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- id="path8175"
- d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
- <path
- id="path8177"
- d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
- <path
- id="path8179"
- d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
- <path
- id="path8181"
- d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- id="path8183"
- d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
- <path
- id="path8185"
- d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
- <path
- id="path8187"
- d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
- <path
- id="path8189"
- d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
- <path
- id="path8191"
- d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
- <path
- id="path8193"
- d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
- <path
- id="path8195"
- d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
- <path
- id="path8197"
- d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
- <path
- id="path8199"
- d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
- </g>
- </g>
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
- id="path8201"
- sodipodi:nodetypes="ccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
- id="path8203"
- sodipodi:nodetypes="ccccccccccc" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer15"
- inkscape:label="Feet"
- style="display:inline">
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
- d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
- id="path8994" />
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
- id="path4189"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
- d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
- id="path4191"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
- d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
- id="path4193"
- clip-path="url(#clipPath3677)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <g
- id="g3617"
- clip-path="url(#clipPath3622)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
- id="path4195"
- d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
- <path
- sodipodi:nodetypes="ccccccccccccc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
- id="path4197"
- d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
- </g>
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
- d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
- id="path4199"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
- <path
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
- d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
- id="path4201"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
- d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
- id="path4203"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
- d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
- id="path4205"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <g
- id="g8317"
- style="filter:url(#filter8333)"
- clip-path="url(#clipPath8338)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4209"
- d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="757.19519"
- x="-55"
- height="177"
- width="182"
- id="rect8315"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g8346"
- style="filter:url(#filter8354)"
- clip-path="url(#clipPath8359)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4207"
- d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="696.19519"
- x="-22"
- height="176"
- width="165"
- id="rect8344"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer16"
- inkscape:label="Left Foot"
- style="display:inline">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
- id="path8848"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
- d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
- id="path3635"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
- d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
- id="path3669"
- clip-path="url(#clipPath3677)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
- <g
- id="g3628"
- clip-path="url(#clipPath3636)"
- transform="translate(276,136)">
- <path
- id="path8988"
- d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
- <path
- id="path8990"
- d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
- </g>
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
- d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
- id="path8992" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
- d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
- id="path4149"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
- d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
- id="path3902"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
- d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
- id="path4135"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <g
- id="g8367"
- style="filter:url(#filter8379)"
- clip-path="url(#clipPath8392)"
- transform="translate(276,136)">
- <path
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4145"
- d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="650.19098"
- x="877.51953"
- height="172.53406"
- width="123.03658"
- id="rect8365"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g8400"
- style="filter:url(#filter8404)"
- clip-path="url(#clipPath8417)"
- transform="translate(276,136)">
- <path
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4147"
- d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="677.06104"
- x="924.89569"
- height="125.1579"
- width="142.12846"
- id="rect8398"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
-</svg>
-Tux is taking a three month sabbatical to work as a barber, so Tuz is
-standing in. He's taken pains to ensure you'll hardly notice.
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet). It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist.
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+ http://www.isc.tamu.edu/~lewing/linux/
-Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA.
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
- c) CFI or JEDEC memory-mapped NOR flash
- d) 4xx/Axon EMAC ethernet nodes
- e) Xilinx IP cores
- f) USB EHCI controllers
- g) MDIO on GPIOs
- h) SPI busses
+ c) 4xx/Axon EMAC ethernet nodes
+ d) Xilinx IP cores
+ e) USB EHCI controllers
+ f) MDIO on GPIOs
+ g) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
translation of SOC addresses for memory mapped SOC registers.
- bus-frequency: Contains the bus frequency for the SOC node.
Typically, the value of this field is filled in by the boot
- loader.
+ loader.
Recommended properties:
device_type = "open-pic";
};
- c) CFI or JEDEC memory-mapped NOR flash
-
- Flash chips (Memory Technology Devices) are often used for solid state
- file systems on embedded devices.
-
- - compatible : should contain the specific model of flash chip(s)
- used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range of the flash chip
- - bank-width : Width (in bytes) of the flash bank. Equal to the
- device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip. If
- omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
- sub-nodes representing partitions (see below). In this case
- both #address-cells and #size-cells must be equal to 1.
-
- For JEDEC compatible devices, the following additional properties
- are defined:
-
- - vendor-id : Contains the flash chip's vendor id (1 byte).
- - device-id : Contains the flash chip's device id (1 byte).
-
- In addition to the information on the flash bank itself, the
- device tree may optionally contain additional information
- describing partitions of the flash address space. This can be
- used on platforms which have strong conventions about which
- portions of the flash are used for what purposes, but which don't
- use an on-flash partition table such as RedBoot.
-
- Each partition is represented as a sub-node of the flash device.
- Each node's name represents the name of the corresponding
- partition of the flash device.
-
- Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
- If omitted, the label is taken from the node name (excluding
- the unit address).
- - read-only : (optional) This parameter, if present, is a hint to
- Linux that this flash partition should only be mounted
- read-only. This is usually used for flash partitions
- containing early-boot firmware images or data which should not
- be clobbered.
-
- Example:
-
- flash@ff000000 {
- compatible = "amd,am29lv128ml", "cfi-flash";
- reg = <ff000000 01000000>;
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- fs@0 {
- label = "fs";
- reg = <0 f80000>;
- };
- firmware@f80000 {
- label ="firmware";
- reg = <f80000 80000>;
- read-only;
- };
- };
-
- d) 4xx/Axon EMAC ethernet nodes
+ c) 4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
available.
For Axon: 0x0000012a
- e) Xilinx IP cores
+ d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
-
+
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
- f) USB EHCI controllers
+ e) USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
big-endian;
};
- g) MDIO on GPIOs
+ f) MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
&qe_pio_c 6>;
};
- h) SPI (Serial Peripheral Interface) busses
+ g) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
--- /dev/null
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+ used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+ It's possible to (optionally) define multiple "reg" tuples so that
+ non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank. Equal to the
+ device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip. If
+ omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+ sub-nodes representing partitions (see below). In this case
+ both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space. This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+ If omitted, the label is taken from the node name (excluding
+ the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+ Linux that this flash partition should only be mounted
+ read-only. This is usually used for flash partitions
+ containing early-boot firmware images or data which should not
+ be clobbered.
+
+Example:
+
+ flash@ff000000 {
+ compatible = "amd,am29lv128ml", "cfi-flash";
+ reg = <ff000000 01000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ fs@0 {
+ label = "fs";
+ reg = <0 f80000>;
+ };
+ firmware@f80000 {
+ label ="firmware";
+ reg = <f80000 80000>;
+ read-only;
+ };
+ };
+
+Here an example with multiple "reg" tuples:
+
+ flash@f0000000,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,PC48F4400P0VB", "cfi-flash";
+ reg = <0 0x00000000 0x02000000
+ 0 0x02000000 0x02000000>;
+ bank-width = <2>;
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
==============================================================
dirty_expire_centisecs
--- /dev/null
+ Event Tracing
+
+ Documentation written by Theodore Ts'o
+
+Introduction
+============
+
+Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions
+using the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system;
+the kernel developer must provide code snippets which define how the
+tracing information is saved into the tracing buffer, and how the
+the tracing information should be printed.
+
+Using Event Tracing
+===================
+
+The events which are available for tracing can be found in the file
+/sys/kernel/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it
+to /sys/debug/tracing/set_event. For example:
+
+ # echo sched_wakeup > /sys/kernel/debug/tracing/set_event
+
+[ Note: events can also be enabled/disabled via the 'enabled' toggle
+ found in the /sys/kernel/tracing/events/ hierarchy of directories. ]
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point:
+
+ # echo '!sched_wakeup' >> /sys/kernel/debug/tracing/set_event
+
+To disable events, echo an empty line to the set_event file:
+
+ # echo > /sys/kernel/debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>. The
+subsystem name is optional, but it is displayed in the available_events
+file. All of the events in a subsystem can be specified via the syntax
+"<subsystem>:*"; for example, to enable all irq events, you can use the
+command:
+
+ # echo 'irq:*' > /sys/kernel/debug/tracing/set_event
+
+Defining an event-enabled tracepoint
+------------------------------------
+
+A kernel developer which wishes to define an event-enabled tracepoint
+must declare the tracepoint using TRACE_EVENT instead of DECLARE_TRACE.
+This is done via two header files in include/trace. For example, to
+event-enable the jbd2 subsystem, we must create two files,
+include/trace/jbd2.h and include/trace/jbd2_event_types.h. The
+include/trace/jbd2.h file should be included by kernel source files that
+will have a tracepoint inserted, and might look like this:
+
+#ifndef _TRACE_JBD2_H
+#define _TRACE_JBD2_H
+
+#include <linux/jbd2.h>
+#include <linux/tracepoint.h>
+
+#include <trace/jbd2_event_types.h>
+
+#endif
+
+In a file that utilizes a jbd2 tracepoint, this header file would be
+included. Note that you still have to use DEFINE_TRACE(). So for
+example, if fs/jbd2/commit.c planned to use the jbd2_start_commit
+tracepoint, it would have the following near the beginning of the file:
+
+#include <trace/jbd2.h>
+
+DEFINE_TRACE(jbd2_start_commit);
+
+Then in the function that would call the tracepoint, it would call the
+tracepoint function. (For more information, please see the tracepoint
+documentation in Documentation/trace/tracepoints.txt):
+
+ trace_jbd2_start_commit(journal, commit_transaction);
+
+The code snippets which allow jbd2_start_commit to be an event-enabled
+tracepoint are placed in the file include/trace/jbd2_event_types.h:
+
+/* use <trace/jbd2.h> instead */
+#ifndef TRACE_EVENT
+# error Do not include this file directly.
+# error Unless you know what you are doing.
+#endif
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
+#include <linux/jbd2.h>
+
+TRACE_EVENT(jbd2_start_commit,
+ TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+ TP_ARGS(journal, commit_transaction),
+ TP_STRUCT__entry(
+ __array( char, devname, BDEVNAME_SIZE+24 )
+ __field( int, transaction )
+ ),
+ TP_fast_assign(
+ memcpy(__entry->devname, journal->j_devname, BDEVNAME_SIZE+24);
+ __entry->transaction = commit_transaction->t_tid;
+ ),
+ TP_printk("dev %s transaction %d",
+ __entry->devname, __entry->transaction)
+);
+
+The TP_PROTO and TP_ARGS are unchanged from DECLARE_TRACE. The new
+arguments to TRACE_EVENT are TP_STRUCT__entry, TP_fast_assign, and
+TP_printk.
+
+TP_STRUCT__entry defines the data structure which will be stored in the
+trace buffer. Normally, fields in __entry will be arrays or simple
+types. It is possible to place data structures in __entry --- however,
+pointers in the data structure can not be trusted, since they will be
+accessed sometime later by TP_printk, and if the data structure contains
+fields that will not or cannot be used by TP_printk, this will waste
+space in the trace buffer. In general, data structures should be
+avoided, unless they do only contain non-pointer types and all of the
+fields will be used by TP_printk.
+
+TP_fast_assign defines the code snippet which saves information into the
+__entry data structure, using the passed-in arguments defined in
+TP_PROTO and TP_ARGS.
+
+Finally, TP_printk will print the __entry data structure. At the time
+when the code snippet defined by TP_printk is executed, it will not have
+access to the TP_ARGS arguments; it can only use the information saved
+in the __entry data structure.
--- /dev/null
+The power tracer collects detailed information about C-state and P-state
+transitions, instead of just looking at the high-level "average"
+information.
+
+There is a helper script found in scrips/tracing/power.pl in the kernel
+sources which can be used to parse this information and create a
+Scalable Vector Graphics (SVG) picture from the trace data.
+
+To use this tracer:
+
+ echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+ echo power > /sys/kernel/debug/tracing/current_tracer
+ echo 1 > /sys/kernel/debug/tracing/tracing_enabled
+ sleep 1
+ echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+ cat /sys/kernel/debug/tracing/trace | \
+ perl scripts/tracing/power.pl > out.sv
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
F: arch/powerpc/include/asm/cell*.h
-F: arch/powerpc/include/asm/lv1call.h
-F: arch/powerpc/include/asm/ps3*.h
F: arch/powerpc/include/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
-F: arch/powerpc/platforms/ps3/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
P: David Vrabel
P: Bartlomiej Zolnierkiewicz
M: bzolnier@gmail.com
L: linux-ide@vger.kernel.org
-T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
S: Maintained
F: Documentation/ide/
F: drivers/ide/
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
-P: Sylvain Munaut
-M: tnt@246tNt.com
P: Grant Likely
M: grant.likely@secretlab.ca
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
M: grant.likely@secretlab.ca
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
P: David S. Miller
M: davem@davemloft.net
L: netdev@vger.kernel.org
-W: http://linux-net.osdl.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
+W: http://www.linuxfoundation.org/en/Net
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
F: net/
F: include/net/
F: include/net/ieee80211*
F: include/net/wireless.h
+NETWORKING DRIVERS
+L: netdev@vger.kernel.org
+W: http://www.linuxfoundation.org/en/Net
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+S: Odd Fixes
+F: drivers/net/
+
NETXEN (1/10) GbE SUPPORT
P: Dhananjay Phadke
M: dhananjay@netxen.com
M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
F: arch/powerpc/platforms/ps3/
F: drivers/*/ps3*
F: drivers/ps3/
+F: drivers/rtc/rtc-ps3.c
F: drivers/usb/host/*ps3.c
+F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
P: Jim Paris
L: cbe-oss-dev@ozlabs.org
S: Maintained
+PTRACE SUPPORT
+P: Roland McGrath
+M: roland@redhat.com
+P: Oleg Nesterov
+M: oleg@redhat.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: include/asm-generic/syscall.h
+F: include/linux/ptrace.h
+F: include/linux/regset.h
+F: include/linux/tracehook.h
+F: kernel/ptrace.c
+
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
RDC R-321X SoC
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc3
-NAME = Temporary Tasmanian Devil
+EXTRAVERSION = -rc4
+NAME = Vindictive Armadillo
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
- @echo ' prepare - Set up for building external modules'
+ @echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+ $(KBUILD_EXTMOD)/Module.markers \
+ $(KBUILD_EXTMOD)/modules.order
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
+#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
+#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ __ASM_SMP_MB \
+ "1: ldl_l %0,0(%2)\n" \
+ insn \
+ "2: stl_c %1,0(%2)\n" \
+ " beq %1,4f\n" \
+ " mov $31,%1\n" \
+ "3: .subsection 2\n" \
+ "4: br 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .long 1b-.\n" \
+ " lda $31,3b-1b(%1)\n" \
+ " .long 2b-.\n" \
+ " lda $31,3b-2b(%1)\n" \
+ " .previous\n" \
+ : "=&r" (oldval), "=&r"(ret) \
+ : "r" (uaddr), "r"(oparg) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int prev, cmp;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ __ASM_SMP_MB
+ "1: ldl_l %0,0(%2)\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,3f\n"
+ " mov %4,%1\n"
+ "2: stl_c %1,0(%2)\n"
+ " beq %1,4f\n"
+ "3: .subsection 2\n"
+ "4: br 1b\n"
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .long 1b-.\n"
+ " lda $31,3b-1b(%0)\n"
+ " .long 2b-.\n"
+ " lda $31,3b-2b(%0)\n"
+ " .previous\n"
+ : "=&r"(prev), "=&r"(cmp)
+ : "r"(uaddr), "r"((long)oldval), "r"(newval)
+ : "memory");
+
+ return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
- alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+ alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
+ifdef CONFIG_BINFMT_AOUT
+obj-y += binfmt_loader.o
+endif
+
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
static int __init init_loader_binfmt(void)
{
- return register_binfmt(&loader_format);
+ return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);
}
void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
}
void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
- printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+ printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);
}
void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
}
void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
}
void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
* the kernel global pointer and jump to the kernel entry-point.
*/
+#include <linux/init.h>
#include <asm/system.h>
#include <asm/asm-offsets.h>
-.section .text.head, "ax"
+__HEAD
.globl swapper_pg_dir
.globl _stext
swapper_pg_dir=SWAPPER_PGD
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*/
#include <linux/module.h>
+#include <linux/sort.h>
#include <asm/uaccess.h>
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+ return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+ struct exception_table_entry *ex_a = a, *ex_b = b;
+ unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+ unsigned int t = ex_a->fixup.unit;
+
+ ex_a->fixup.unit = ex_b->fixup.unit;
+ ex_b->fixup.unit = t;
+ ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+ ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+ const struct exception_table_entry *x = a, *y = b;
+
+ /* avoid overflow */
+ if (ex_to_addr(x) > ex_to_addr(y))
+ return 1;
+ if (ex_to_addr(x) < ex_to_addr(y))
+ return -1;
+ return 0;
+}
+
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
+ sort(start, finish - start, sizeof(struct exception_table_entry),
+ cmp_ex, swap_ex);
}
const struct exception_table_entry *
unsigned long mid_value;
mid = (last - first) / 2 + first;
- mid_value = (unsigned long)&mid->insn + mid->insn;
+ mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
+ select HAVE_IDE
+ select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 && !SMP
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
endmenu
source "arch/arm/common/Kconfig"
If in doubt, say N.
-config CPU_FREQ_PXA
- bool
- depends on CPU_FREQ && ARCH_PXA && PXA25x
- default y
- select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
endif
source "drivers/cpuidle/Kconfig"
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
+#define __NR_preadv (__NR_SYSCALL_BASE+361)
+#define __NR_pwritev (__NR_SYSCALL_BASE+362)
/*
* The following SWIs are ARM private.
CALL(sys_dup3)
CALL(sys_pipe2)
/* 360 */ CALL(sys_inotify_init1)
+ CALL(sys_preadv)
+ CALL(sys_pwritev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
comment "DaVinci Core Type"
-config ARCH_DAVINCI644x
- default y
+config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
- bool "TI DaVinci EVM"
+ bool "TI DM644x EVM"
default y
- depends on ARCH_DAVINCI644x
+ depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
- for development is a DaVinci EVM
+ for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+ bool "DAVINCI multiplexing support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ Pin multiplexing support for DAVINCI boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config DAVINCI_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_DAVINCI
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
endmenu
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o mux.o devices.o usb.o
+ gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX) += mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
--- /dev/null
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/etherdevice.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
+
+#define DM644X_EVM_PHY_MASK (0x2)
+#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+#define DAVINCI_CFC_ATA_BASE 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
+#define LXT971_PHY_ID (0x001378e2)
+#define LXT971_PHY_MASK (0xfffffff0)
+
+static struct mtd_partition davinci_evm_norflash_partitions[] = {
+ /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 5 * SZ_64K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next 1 sectors */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data davinci_evm_norflash_data = {
+ .width = 2,
+ .parts = davinci_evm_norflash_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
+};
+
+/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+ * limits addresses to 16M, so using addresses past 16M will wrap */
+static struct resource davinci_evm_norflash_resource = {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device davinci_evm_norflash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_norflash_data,
+ },
+ .num_resources = 1,
+ .resource = &davinci_evm_norflash_resource,
+};
+
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+ /* Bootloader layout depends on whose u-boot is installed, but we
+ * can hide all the details.
+ * - block 0 for u-boot environment ... in mainline u-boot
+ * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+ * - blocks 6...? for u-boot
+ * - blocks 16..23 for u-boot environment ... in TI's u-boot
+ */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K + SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* Kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ /* File system (older GIT kernels started this on the 5MB mark) */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash BBT ... created by TI's CCS
+ * using flashwriter_nand.out, but ignored by TI's versions of
+ * Linux and u-boot. We boot faster by using them.
+ */
+};
+
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+ .parts = davinci_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
+ .resource = davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+ .name = "rtc_davinci_evm",
+ .id = -1,
+};
+
+static struct resource ide_resources[] = {
+ {
+ .start = DAVINCI_CFC_ATA_BASE,
+ .end = DAVINCI_CFC_ATA_BASE + 0x7ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_IDE,
+ .end = IRQ_IDE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ide_dma_mask = DMA_32BIT_MASK;
+
+static struct platform_device ide_dev = {
+ .name = "palm_bk3710",
+ .id = -1,
+ .resource = ide_resources,
+ .num_resources = ARRAY_SIZE(ide_resources),
+ .dev = {
+ .dma_mask = &ide_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ },
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * I2C GPIO expanders
+ */
+
+#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
+
+
+/* U2 -- LEDs */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS8", .active_low = 1,
+ .default_trigger = "heartbeat", },
+ { .name = "DS7", .active_low = 1, },
+ { .name = "DS6", .active_low = 1, },
+ { .name = "DS5", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS2", .active_low = 1,
+ .default_trigger = "mmc0", },
+ { .name = "DS1", .active_low = 1,
+ .default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int
+evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ }
+
+ /* what an extremely annoying way to be forced to handle
+ * device unregistration ...
+ */
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev,
+ &evm_led_data, sizeof evm_led_data);
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int
+evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u2 = {
+ .gpio_base = PCF_Uxx_BASE(0),
+ .setup = evm_led_setup,
+ .teardown = evm_led_teardown,
+};
+
+
+/* U18 - A/V clock generator and user switch */
+
+static int sw_gpio;
+
+static ssize_t
+sw_show(struct device *d, struct device_attribute *a, char *buf)
+{
+ char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
+
+ strcpy(buf, s);
+ return strlen(s);
+}
+
+static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
+
+static int
+evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ int status;
+
+ /* export dip switch option */
+ sw_gpio = gpio + 7;
+ status = gpio_request(sw_gpio, "user_sw");
+ if (status == 0)
+ status = gpio_direction_input(sw_gpio);
+ if (status == 0)
+ status = device_create_file(&client->dev, &dev_attr_user_sw);
+ else
+ gpio_free(sw_gpio);
+ if (status != 0)
+ sw_gpio = -EINVAL;
+
+ /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
+ gpio_request(gpio + 3, "pll_fs2");
+ gpio_direction_output(gpio + 3, 0);
+
+ gpio_request(gpio + 2, "pll_fs1");
+ gpio_direction_output(gpio + 2, 0);
+
+ gpio_request(gpio + 1, "pll_sr");
+ gpio_direction_output(gpio + 1, 0);
+
+ return 0;
+}
+
+static int
+evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 3);
+
+ if (sw_gpio > 0) {
+ device_remove_file(&client->dev, &dev_attr_user_sw);
+ gpio_free(sw_gpio);
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u18 = {
+ .gpio_base = PCF_Uxx_BASE(1),
+ .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
+ .setup = evm_u18_setup,
+ .teardown = evm_u18_teardown,
+};
+
+
+/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
+
+static int
+evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ /* p0 = nDRV_VBUS (initial: don't supply it) */
+ gpio_request(gpio + 0, "nDRV_VBUS");
+ gpio_direction_output(gpio + 0, 1);
+
+ /* p1 = VDDIMX_EN */
+ gpio_request(gpio + 1, "VDDIMX_EN");
+ gpio_direction_output(gpio + 1, 1);
+
+ /* p2 = VLYNQ_EN */
+ gpio_request(gpio + 2, "VLYNQ_EN");
+ gpio_direction_output(gpio + 2, 1);
+
+ /* p3 = n3V3_CF_RESET (initial: stay in reset) */
+ gpio_request(gpio + 3, "nCF_RESET");
+ gpio_direction_output(gpio + 3, 0);
+
+ /* (p4 unused) */
+
+ /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
+ gpio_request(gpio + 5, "WLAN_RESET");
+ gpio_direction_output(gpio + 5, 1);
+
+ /* p6 = nATA_SEL (initial: select) */
+ gpio_request(gpio + 6, "nATA_SEL");
+ gpio_direction_output(gpio + 6, 0);
+
+ /* p7 = nCF_SEL (initial: deselect) */
+ gpio_request(gpio + 7, "nCF_SEL");
+ gpio_direction_output(gpio + 7, 1);
+
+ /* irlml6401 switches over 1A, in under 8 msec;
+ * now it can be managed by nDRV_VBUS ...
+ */
+ setup_usb(500, 8);
+
+ return 0;
+}
+
+static int
+evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 7);
+ gpio_free(gpio + 6);
+ gpio_free(gpio + 5);
+ gpio_free(gpio + 3);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 0);
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u35 = {
+ .gpio_base = PCF_Uxx_BASE(2),
+ .setup = evm_u35_setup,
+ .teardown = evm_u35_teardown,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
+ * - ... newer boards may have more
+ */
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+ DECLARE_MAC_BUF(mac_str);
+ char mac_addr[6];
+
+ at24_mem_acc = mem_acc;
+
+ /* Read MAC addr from EEPROM */
+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+ printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+ print_mac(mac_str, mac_addr));
+ }
+}
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = at24_setup,
+};
+
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more. It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ dm6446evm_msp = client;
+ return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+ dm6446evm_msp = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+ { "dm6446evm_msp", 0, },
+ { /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+ .driver.name = "dm6446evm_msp",
+ .id_table = dm6446evm_msp_ids,
+ .probe = dm6446evm_msp_probe,
+ .remove = dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+ static const char txbuf[2] = { 2, 4, };
+ char buf[4];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = (void __force *)txbuf,
+ },
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = I2C_M_RD,
+ .len = 4,
+ .buf = buf,
+ },
+ };
+ int status;
+
+ if (!dm6446evm_msp)
+ return -ENXIO;
+
+ /* Command 4 == get input state, returns port 2 and port3 data
+ * S Addr W [A] len=2 [A] cmd=4 [A]
+ * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+ */
+ status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+ if (status < 0)
+ return status;
+
+ dev_dbg(&dm6446evm_msp->dev,
+ "PINS: %02x %02x %02x %02x\n",
+ buf[0], buf[1], buf[2], buf[3]);
+
+ return (buf[3] << 8) | buf[2];
+}
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x38),
+ .platform_data = &pcf_data_u2,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x39),
+ .platform_data = &pcf_data_u18,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x3a),
+ .platform_data = &pcf_data_u35,
+ },
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ /* ALSO:
+ * - tvl320aic33 audio codec (0x1b)
+ * - tvp5146 video decoder (0x5d)
+ */
+};
+
+/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
+ * which requires 100 usec of idle bus after i2c writes sent to it.
+ */
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_add_driver(&dm6446evm_msp_driver);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &davinci_fb_device,
+ &rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init
+davinci_evm_map_io(void)
+{
+ davinci_map_common_io();
+ dm644x_init();
+}
+
+static int davinci_phy_fixup(struct phy_device *phydev)
+{
+ unsigned int control;
+ /* CRITICAL: Fix for increasing PHY signal drive strength for
+ * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+ * signal strength was low causing TX to fail randomly. The
+ * fix is to Set bit 11 (Increased MII drive strength) of PHY
+ * register 26 (Digital Config register) on this phy. */
+ control = phy_read(phydev, 26);
+ phy_write(phydev, 26, (control | 0x800));
+ return 0;
+}
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || \
+ defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+ defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
+#endif
+
+static __init void davinci_evm_init(void)
+{
+ struct clk *aemif_clk;
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND || HAS_NOR)
+ pr_warning("WARNING: both IDE and Flash are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable IDE for NAND/NOR support.\n");
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN);
+ davinci_cfg_reg(DM644X_HDIREN);
+ platform_device_register(&ide_dev);
+ } else if (HAS_NAND || HAS_NOR) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND) {
+ platform_device_register(&davinci_evm_nandflash_device);
+ evm_leds[7].default_trigger = "nand-disk";
+ if (HAS_NOR)
+ pr_warning("WARNING: both NAND and NOR flash "
+ "are enabled; disable one of them.\n");
+ } else if (HAS_NOR)
+ platform_device_register(&davinci_evm_norflash_device);
+ }
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+
+ davinci_serial_init(&uart_config);
+
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+
+}
+
+static __init void davinci_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
+ /* Maintainer: MontaVista Software <source@mvista.com> */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_evm_map_io,
+ .init_irq = davinci_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_evm_init,
+MACHINE_END
+++ /dev/null
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/i2c.h>
-
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
-
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
-
-static struct mtd_partition davinci_evm_norflash_partitions[] = {
- /* bootloader (U-Boot, etc) in first 4 sectors */
- {
- .name = "bootloader",
- .offset = 0,
- .size = 4 * SZ_64K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next 1 sectors */
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct physmap_flash_data davinci_evm_norflash_data = {
- .width = 2,
- .parts = davinci_evm_norflash_partitions,
- .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
-};
-
-/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
- * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_norflash_resource = {
- .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device davinci_evm_norflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &davinci_evm_norflash_data,
- },
- .num_resources = 1,
- .resource = &davinci_evm_norflash_resource,
-};
-
-#endif
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-
-static struct resource ide_resources[] = {
- {
- .start = DAVINCI_CFC_ATA_BASE,
- .end = DAVINCI_CFC_ATA_BASE + 0x7ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_IDE,
- .end = IRQ_IDE,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
- .name = "palm_bk3710",
- .id = -1,
- .resource = ide_resources,
- .num_resources = ARRAY_SIZE(ide_resources),
- .dev = {
- .dma_mask = &ide_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-#endif
-
-/*----------------------------------------------------------------------*/
-
-/*
- * I2C GPIO expanders
- */
-
-#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
-
-
-/* U2 -- LEDs */
-
-static struct gpio_led evm_leds[] = {
- { .name = "DS8", .active_low = 1,
- .default_trigger = "heartbeat", },
- { .name = "DS7", .active_low = 1, },
- { .name = "DS6", .active_low = 1, },
- { .name = "DS5", .active_low = 1, },
- { .name = "DS4", .active_low = 1, },
- { .name = "DS3", .active_low = 1, },
- { .name = "DS2", .active_low = 1,
- .default_trigger = "mmc0", },
- { .name = "DS1", .active_low = 1,
- .default_trigger = "ide-disk", },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
- .num_leds = ARRAY_SIZE(evm_leds),
- .leds = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int
-evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- struct gpio_led *leds = evm_leds;
- int status;
-
- while (ngpio--) {
- leds->gpio = gpio++;
- leds++;
- }
-
- /* what an extremely annoying way to be forced to handle
- * device unregistration ...
- */
- evm_led_dev = platform_device_alloc("leds-gpio", 0);
- platform_device_add_data(evm_led_dev,
- &evm_led_data, sizeof evm_led_data);
-
- evm_led_dev->dev.parent = &client->dev;
- status = platform_device_add(evm_led_dev);
- if (status < 0) {
- platform_device_put(evm_led_dev);
- evm_led_dev = NULL;
- }
- return status;
-}
-
-static int
-evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- if (evm_led_dev) {
- platform_device_unregister(evm_led_dev);
- evm_led_dev = NULL;
- }
- return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u2 = {
- .gpio_base = PCF_Uxx_BASE(0),
- .setup = evm_led_setup,
- .teardown = evm_led_teardown,
-};
-
-
-/* U18 - A/V clock generator and user switch */
-
-static int sw_gpio;
-
-static ssize_t
-sw_show(struct device *d, struct device_attribute *a, char *buf)
-{
- char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
-
- strcpy(buf, s);
- return strlen(s);
-}
-
-static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
-
-static int
-evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- int status;
-
- /* export dip switch option */
- sw_gpio = gpio + 7;
- status = gpio_request(sw_gpio, "user_sw");
- if (status == 0)
- status = gpio_direction_input(sw_gpio);
- if (status == 0)
- status = device_create_file(&client->dev, &dev_attr_user_sw);
- else
- gpio_free(sw_gpio);
- if (status != 0)
- sw_gpio = -EINVAL;
-
- /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
- gpio_request(gpio + 3, "pll_fs2");
- gpio_direction_output(gpio + 3, 0);
-
- gpio_request(gpio + 2, "pll_fs1");
- gpio_direction_output(gpio + 2, 0);
-
- gpio_request(gpio + 1, "pll_sr");
- gpio_direction_output(gpio + 1, 0);
-
- return 0;
-}
-
-static int
-evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- gpio_free(gpio + 1);
- gpio_free(gpio + 2);
- gpio_free(gpio + 3);
-
- if (sw_gpio > 0) {
- device_remove_file(&client->dev, &dev_attr_user_sw);
- gpio_free(sw_gpio);
- }
- return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u18 = {
- .gpio_base = PCF_Uxx_BASE(1),
- .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
- .setup = evm_u18_setup,
- .teardown = evm_u18_teardown,
-};
-
-
-/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
-
-static int
-evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- /* p0 = nDRV_VBUS (initial: don't supply it) */
- gpio_request(gpio + 0, "nDRV_VBUS");
- gpio_direction_output(gpio + 0, 1);
-
- /* p1 = VDDIMX_EN */
- gpio_request(gpio + 1, "VDDIMX_EN");
- gpio_direction_output(gpio + 1, 1);
-
- /* p2 = VLYNQ_EN */
- gpio_request(gpio + 2, "VLYNQ_EN");
- gpio_direction_output(gpio + 2, 1);
-
- /* p3 = n3V3_CF_RESET (initial: stay in reset) */
- gpio_request(gpio + 3, "nCF_RESET");
- gpio_direction_output(gpio + 3, 0);
-
- /* (p4 unused) */
-
- /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
- gpio_request(gpio + 5, "WLAN_RESET");
- gpio_direction_output(gpio + 5, 1);
-
- /* p6 = nATA_SEL (initial: select) */
- gpio_request(gpio + 6, "nATA_SEL");
- gpio_direction_output(gpio + 6, 0);
-
- /* p7 = nCF_SEL (initial: deselect) */
- gpio_request(gpio + 7, "nCF_SEL");
- gpio_direction_output(gpio + 7, 1);
-
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
- setup_usb(500, 8);
-
- return 0;
-}
-
-static int
-evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- gpio_free(gpio + 7);
- gpio_free(gpio + 6);
- gpio_free(gpio + 5);
- gpio_free(gpio + 3);
- gpio_free(gpio + 2);
- gpio_free(gpio + 1);
- gpio_free(gpio + 0);
- return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u35 = {
- .gpio_base = PCF_Uxx_BASE(2),
- .setup = evm_u35_setup,
- .teardown = evm_u35_teardown,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- * - 0x7f00, 6 bytes Ethernet Address
- * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
- * - ... newer boards may have more
- */
-static struct at24_platform_data eeprom_info = {
- .byte_len = (256*1024) / 8,
- .page_size = 64,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
- {
- I2C_BOARD_INFO("pcf8574", 0x38),
- .platform_data = &pcf_data_u2,
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x39),
- .platform_data = &pcf_data_u18,
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x3a),
- .platform_data = &pcf_data_u35,
- },
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .platform_data = &eeprom_info,
- },
- /* ALSO:
- * - tvl320aic33 audio codec (0x1b)
- * - msp430 microcontroller (0x23)
- * - tvp5146 video decoder (0x5d)
- */
-};
-
-/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
- * which requires 100 usec of idle bus after i2c writes sent to it.
- */
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 20 /* kHz */,
- .bus_delay = 100 /* usec */,
-};
-
-static void __init evm_init_i2c(void)
-{
- davinci_init_i2c(&i2c_pdata);
- i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- &davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
- &ide_dev,
-#endif
-};
-
-static void __init
-davinci_evm_map_io(void)
-{
- davinci_map_common_io();
-}
-
-static __init void davinci_evm_init(void)
-{
- davinci_psc_init();
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
- "but share pins.\n\t Disable IDE for NOR support.\n");
-#endif
-#endif
-
- platform_add_devices(davinci_evm_devices,
- ARRAY_SIZE(davinci_evm_devices));
- evm_init_i2c();
-}
-
-static __init void davinci_evm_irq_init(void)
-{
- davinci_init_common_hw();
- davinci_irq_init();
-}
-
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
- /* Maintainer: MontaVista Software <source@mvista.com> */
- .phys_io = IO_PHYS,
- .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
- .map_io = davinci_evm_map_io,
- .init_irq = davinci_evm_irq_init,
- .timer = &davinci_timer,
- .init_machine = davinci_evm_init,
-MACHINE_END
/*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/psc.h>
+#include <mach/cputype.h>
#include "clock.h"
-/* PLL/Reset register offsets */
-#define PLLM 0x110
-
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000; /* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
+ return (clk->flags & PSC_DSP)
+ ? DAVINCI_GPSC_DSPDOMAIN
+ : DAVINCI_GPSC_ARMDOMAIN;
}
-EXPORT_SYMBOL(clk_get);
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
- return 0;
+ if (clk->parent)
+ __clk_enable(clk->parent);
+ if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
- if (clk->usecount)
+ if (WARN_ON(clk->usecount == 0))
return;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+ if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- if (clk->usecount++ == 0) {
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(clk_enable);
if (clk == NULL || IS_ERR(clk))
return;
- if (clk->usecount > 0 && !(--clk->usecount)) {
- spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (WARN(clk->parent && !clk->parent->rate,
+ "CLK: %s parent %s has no rate!\n",
+ clk->name, clk->parent->name))
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
+ list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
+ /* If rate is already set, use it */
+ if (clk->rate)
+ return 0;
+
+ /* Otherwise, default to parent rate */
+ if (clk->parent)
+ clk->rate = clk->parent->rate;
+
return 0;
}
EXPORT_SYMBOL(clk_register);
}
EXPORT_SYMBOL(clk_unregister);
-static struct clk davinci_clks[] = {
- {
- .name = "ARMCLK",
- .rate = &armrate,
- .lpsc = -1,
- .flags = ALWAYS_ENABLED,
- },
- {
- .name = "UART",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_UART0,
- },
- {
- .name = "EMACCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
- },
- {
- .name = "I2CCLK",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_I2C,
- },
- {
- .name = "IDECLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_ATA,
- },
- {
- .name = "McBSPCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_McBSP,
- },
- {
- .name = "MMCSDCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_MMC_SD,
- },
- {
- .name = "SPICLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_SPI,
- },
- {
- .name = "gpio",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_GPIO,
- },
- {
- .name = "usb",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_USB,
- },
- {
- .name = "AEMIFCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_AEMIF,
- .usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+
+ spin_lock_irq(&clockfw_lock);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->usecount > 0)
+ continue;
+ if (!(ck->flags & CLK_PSC))
+ continue;
+
+ /* ignore if in Disabled or SwRstDisable states */
+ if (!davinci_psc_is_clk_active(ck->lpsc))
+ continue;
+
+ pr_info("Clocks: disable unused %s\n", ck->name);
+ davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
-};
+ spin_unlock_irq(&clockfw_lock);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
{
- struct clk *clkp;
- int count = 0;
- u32 pll_mult;
-
- pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
- commonrate = ((pll_mult + 1) * 27000000) / 6;
- armrate = ((pll_mult + 1) * 27000000) / 2;
-
- for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
- count++, clkp++) {
- clk_register(clkp);
-
- /* Turn on clocks that have been enabled in the
- * table above */
- if (clkp->usecount)
- clk_enable(clkp);
+ u32 v, plldiv;
+ struct pll_data *pll;
+
+ /* If this is the PLL base clock, no more calculations needed */
+ if (clk->pll_data)
+ return;
+
+ if (WARN_ON(!clk->parent))
+ return;
+
+ clk->rate = clk->parent->rate;
+
+ /* Otherwise, the parent must be a PLL */
+ if (WARN_ON(!clk->parent->pll_data))
+ return;
+
+ pll = clk->parent->pll_data;
+
+ /* If pre-PLL, source clock is before the multiplier and divider(s) */
+ if (clk->flags & PRE_PLL)
+ clk->rate = pll->input_rate;
+
+ if (!clk->div_reg)
+ return;
+
+ v = __raw_readl(pll->base + clk->div_reg);
+ if (v & PLLDIV_EN) {
+ plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+ if (plldiv)
+ clk->rate /= plldiv;
+ }
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+ u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+ u8 bypass;
+ struct pll_data *pll = clk->pll_data;
+
+ pll->base = IO_ADDRESS(pll->phys_base);
+ ctrl = __raw_readl(pll->base + PLLCTL);
+ clk->rate = pll->input_rate = clk->parent->rate;
+
+ if (ctrl & PLLCTL_PLLEN) {
+ bypass = 0;
+ mult = __raw_readl(pll->base + PLLM);
+ mult = (mult & PLLM_PLLM_MASK) + 1;
+ } else
+ bypass = 1;
+
+ if (pll->flags & PLL_HAS_PREDIV) {
+ prediv = __raw_readl(pll->base + PREDIV);
+ if (prediv & PLLDIV_EN)
+ prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+ else
+ prediv = 1;
+ }
+
+ /* pre-divider is fixed, but (some?) chips won't report that */
+ if (cpu_is_davinci_dm355() && pll->num == 1)
+ prediv = 8;
+
+ if (pll->flags & PLL_HAS_POSTDIV) {
+ postdiv = __raw_readl(pll->base + POSTDIV);
+ if (postdiv & PLLDIV_EN)
+ postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+ else
+ postdiv = 1;
+ }
+
+ if (!bypass) {
+ clk->rate /= prediv;
+ clk->rate *= mult;
+ clk->rate /= postdiv;
+ }
+
+ pr_debug("PLL%d: input = %lu MHz [ ",
+ pll->num, clk->parent->rate / 1000000);
+ if (bypass)
+ pr_debug("bypass ");
+ if (prediv > 1)
+ pr_debug("/ %d ", prediv);
+ if (mult > 1)
+ pr_debug("* %d ", mult);
+ if (postdiv > 1)
+ pr_debug("/ %d ", postdiv);
+ pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+ {
+ struct davinci_clk *c;
+ struct clk *clk;
+
+ for (c = clocks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+
+ if (clk->pll_data)
+ clk_pll_init(clk);
+
+ /* Calculate rates for PLL-derived clocks */
+ else if (clk->flags & CLK_PLL)
+ clk_sysclk_recalc(clk);
+
+ if (clk->lpsc)
+ clk->flags |= CLK_PSC;
+
+ clkdev_add(&c->lk);
+ clk_register(clk);
+
+ /* Turn on clocks that Linux doesn't otherwise manage */
+ if (clk->flags & ALWAYS_ENABLED)
+ clk_enable(clk);
}
return 0;
{
}
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX 10 /* longest clock name */
+#define NEST_DELTA 2
+#define NEST_MAX 4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
- struct clk *cp;
+ char *state;
+ char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ if (parent->flags & CLK_PLL)
+ state = "pll";
+ else if (parent->flags & CLK_PSC)
+ state = "psc";
+ else
+ state = "";
+
+ /* <nest spaces> name <pad to end> */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+ buf, parent->usecount, state, clk_get_rate(parent));
+ /* REVISIT show device associations too */
+
+ /* cost is now small, but not linear... */
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->parent == parent)
+ dump_clock(s, nest + NEST_DELTA, clk);
+ }
+}
- list_for_each_entry(cp, &clocks, node)
- seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+ /* Show clock tree; we know the main oscillator is first.
+ * We trust nonzero usecounts equate to PSC enables...
+ */
+ mutex_lock(&clocks_mutex);
+ if (!list_empty(&clocks))
+ dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+ mutex_unlock(&clocks_mutex);
return 0;
}
}
__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */
/*
* TI DaVinci clock definitions
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL 0x100
+#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_CLKMODE BIT(8)
+
+#define PLLM 0x110
+#define PLLM_PLLM_MASK 0xff
+
+#define PREDIV 0x114
+#define PLLDIV1 0x118
+#define PLLDIV2 0x11c
+#define PLLDIV3 0x120
+#define POSTDIV 0x128
+#define BPDIV 0x12c
+#define PLLCMD 0x138
+#define PLLSTAT 0x13c
+#define PLLALNCTL 0x140
+#define PLLDCHANGE 0x144
+#define PLLCKEN 0x148
+#define PLLCKSTAT 0x14c
+#define PLLSYSTAT 0x150
+#define PLLDIV4 0x160
+#define PLLDIV5 0x164
+#define PLLDIV6 0x168
+#define PLLDIV7 0x16c
+#define PLLDIV8 0x170
+#define PLLDIV9 0x174
+#define PLLDIV_EN BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+ u32 phys_base;
+ void __iomem *base;
+ u32 num;
+ u32 flags;
+ u32 input_rate;
+};
+#define PLL_HAS_PREDIV 0x01
+#define PLL_HAS_POSTDIV 0x02
+
struct clk {
struct list_head node;
struct module *owner;
const char *name;
- unsigned int *rate;
- int id;
- __s8 usecount;
- __u8 flags;
- __u8 lpsc;
+ unsigned long rate;
+ u8 usecount;
+ u8 flags;
+ u8 lpsc;
+ struct clk *parent;
+ struct pll_data *pll_data;
+ u32 div_reg;
};
/* Clock flags */
-#define RATE_CKCTL 1
-#define RATE_FIXED 2
-#define RATE_PROPAGATES 4
-#define VIRTUAL_CLOCK 8
-#define ALWAYS_ENABLED 16
-#define ENABLE_REG_32BIT 32
+#define ALWAYS_ENABLED BIT(1)
+#define CLK_PSC BIT(2)
+#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL BIT(4) /* PLL-derived clock */
+#define PRE_PLL BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+int davinci_clk_init(struct davinci_clk *clocks);
#endif
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
+ if (cpu_is_davinci_dm644x())
+ davinci_cfg_reg(DM644X_I2C);
+
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}
--- /dev/null
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ 27000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+ .name = "pll2_sysclk2",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_GEM,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+ .name = "vicp",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+ .name = "ide",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+ .name = "mmcsd",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+ .name = "spi",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+ .name = "vlynq",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "vicp", &vicp_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("palm_bk3710", NULL, &ide_clk),
+ CLK("soc-audio.0", NULL, &asp_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+ CLK(NULL, "spi", &spi_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, "vlynq", &vlynq_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+ {
+ .start = DM644X_EMAC_BASE,
+ .end = DM644X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_EMACINT,
+ .end = IRQ_EMACINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm644x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dm644x_emac_resources),
+ .resource = dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
+MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
+MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
+
+MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
+
+MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
+
+MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
+
+MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
+
+MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
+MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
+
+MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
+
+MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
+
+MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
+
+MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
+MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
+MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
+
+MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
+
+MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
+
+MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
+MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
+MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
+MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
+
+MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
+
+MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
+MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+ 0, 1, 12, 13, 14,
+ 15, 25, 30, 31, 45,
+ 46, 47, 55, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm644x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+ davinci_clk_init(dm644x_clks);
+ davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm644x())
+ return 0;
+
+ platform_device_register(&dm644x_edma_device);
+ return 0;
+}
+postcore_initcall(dm644x_init_devices);
--- /dev/null
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE 0x01C00000
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+#define EDMA_MAX_EVQUE 2 /* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ val |= or;
+ edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val |= or;
+ edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+ return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+ edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+ edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+ edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+ edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+ return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+ return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+ return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+ edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+ edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+ edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform. It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+ {0, 0},
+ {1, 1},
+ {-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {1, 7},
+ {-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = EVENTQ_1;
+
+ queue_no &= 7;
+ edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ if (!callback) {
+ edma_shadow0_write_array(SH_IECR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+
+ intr_data[lch].callback = callback;
+ intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(SH_ICR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ edma_shadow0_write_array(SH_IESR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+ && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j;
+ if (edma_shadow0_read_array(SH_IPR, 0))
+ j = 0;
+ else if (edma_shadow0_read_array(SH_IPR, 1))
+ j = 1;
+ else
+ break;
+ dev_dbg(data, "IPR%d %08x\n", j,
+ edma_shadow0_read_array(SH_IPR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(SH_ICR, j, (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k, DMA_COMPLETE,
+ intr_data[k].data);
+ }
+ }
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_shadow0_write(SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+ (edma_read_array(EDMA_EMR, 1) == 0) &&
+ (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, 1 << i);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j,
+ (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k,
+ DMA_CC_ERROR,
+ intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_QEMR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_QEMCR, 1 << i);
+ edma_shadow0_write(SH_QSECR, (1 << i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_CCERR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_CCERRCLR, 1 << i);
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(EDMA_EMR, 0) == 0)
+ && (edma_read_array(EDMA_EMR, 1) == 0)
+ && (edma_read(EDMA_QEMR) == 0)
+ && (edma_read(EDMA_CCERR) == 0)) {
+ break;
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled false /* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc0err_handler\n");
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc1err_handler\n");
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ if (channel < 0) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_noevent,
+ num_channels, channel);
+ if (channel == num_channels)
+ return -ENOMEM;
+ if (!test_and_set_bit(channel, edma_inuse))
+ break;
+ channel++;
+ }
+ } else if (channel >= num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(channel);
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(channel, callback, data);
+
+ map_dmach_queue(channel, eventq_no);
+
+ return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+ if (slot < 0) {
+ slot = num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_inuse,
+ num_slots, slot);
+ if (slot == num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_inuse))
+ break;
+ }
+ } else if (slot < num_channels || slot >= num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ if (slot < num_channels || slot >= num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot. Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct edmacc_param temp;
+
+ edma_read_slot(slot, &temp);
+ if (src != NULL)
+ *src = temp.src;
+ if (dst != NULL)
+ *dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ if (from >= num_slots)
+ return;
+ if (to >= num_slots)
+ return;
+ edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ if (from >= num_slots)
+ return;
+ edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_noevent)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(SH_ESR, j));
+ edma_shadow0_write_array(SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(SH_ER, j));
+ /* Clear any pending error */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_shadow0_write_array(SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, j, mask);
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write_array(EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = 1 << (channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+ if (channel < 32)
+ edma_write(EDMA_ECR, 1 << channel);
+ else
+ edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info *info = pdev->dev.platform_data;
+ int i;
+ int status;
+ const s8 *noevent;
+ int irq = 0, err_irq = 0;
+ struct resource *r;
+ resource_size_t len;
+
+ if (!info)
+ return -ENODEV;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+ if (!r)
+ return -ENODEV;
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r)
+ return -EBUSY;
+
+ edmacc_regs_base = ioremap(r->start, len);
+ if (!edmacc_regs_base) {
+ status = -EBUSY;
+ goto fail1;
+ }
+
+ num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+ num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+ for (i = 0; i < num_slots; i++)
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ noevent = info->noevent;
+ if (noevent) {
+ while (*noevent != -1)
+ set_bit(*noevent++, edma_noevent);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ irq, status);
+ goto fail;
+ }
+
+ err_irq = platform_get_irq(pdev, 1);
+ status = request_irq(err_irq, dma_ccerr_handler, 0,
+ "edma_error", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ err_irq, status);
+ goto fail;
+ }
+
+ if (tc_errs_handled) {
+ status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+ "edma_tc0", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ IRQ_TCERRINT0, status);
+ return status;
+ }
+ status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+ "edma_tc1", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+ IRQ_TCERRINT, status);
+ return status;
+ }
+ }
+
+ /* Everything lives on transfer controller 1 until otherwise specified.
+ * This way, long transfers on the low priority queue
+ * started by the codec engine will not cause audio defects.
+ */
+ for (i = 0; i < num_channels; i++)
+ map_dmach_queue(i, EVENTQ_1);
+
+ /* Event queue to TC mapping */
+ for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+ map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ for (i = 0; i < info->n_region; i++) {
+ edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(EDMA_QRAE, i, 0x0);
+ }
+
+ return 0;
+
+fail:
+ if (err_irq)
+ free_irq(err_irq, NULL);
+ if (irq)
+ free_irq(irq, NULL);
+ iounmap(edmacc_regs_base);
+fail1:
+ release_mem_region(r->start, len);
+ return status;
+}
+
+
+static struct platform_driver edma_driver = {
+ .driver.name = "edma",
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
#include <linux/irq.h>
#include <linux/bitops.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static unsigned __initdata ngpio;
/* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
{
int i, base;
- for (i = 0, base = 0;
- i < ARRAY_SIZE(chips);
- i++, base += 32) {
+ /* The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ ngpio = 104;
+ } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
+ ngpio = 71;
+ } else if (cpu_is_davinci_dm646x()) {
+ /* NOTE: each bank has several "reserved" bits,
+ * unusable as GPIOs. Only 33 of the GPIO numbers
+ * are usable, and we're not rejecting the others.
+ */
+ ngpio = 43;
+ } else {
+ /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
- chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
- * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
- * a good way to hook those up ...
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options). We don't try to use those.
*
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
}
/*
- * NOTE: for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
+ unsigned bank_irq;
struct clk *clk;
+ u32 binten = 0;
+
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ bank_irq = IRQ_DM355_GPIOBNK0;
+ } else if (cpu_is_davinci_dm644x()) {
+ bank_irq = IRQ_GPIOBNK0;
+ } else if (cpu_is_davinci_dm646x()) {
+ bank_irq = IRQ_DM646X_GPIOBNK0;
+ } else {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
- return 0;
+ return PTR_ERR(clk);
}
-
clk_enable(clk);
- for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
- gpio < DAVINCI_N_GPIO; bank++) {
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
- set_irq_chained_handler(bank, gpio_irq_handler);
- set_irq_chip_data(bank, g);
- set_irq_data(bank, (void *)irq);
+ set_irq_chained_handler(bank_irq, gpio_irq_handler);
+ set_irq_chip_data(bank_irq, g);
+ set_irq_data(bank_irq, (void *)irq);
- for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
- i++, irq++, gpio++) {
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
+ binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(0x1f, (void *__iomem)
+ __raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-
arch_initcall(davinci_gpio_irq_setup);
#include <linux/init.h>
#include <linux/io.h>
-#define JTAG_ID_BASE 0x01c40028
+#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
.manufacturer = 0x017,
.type = 0x64460000,
},
+ {
+ /* DM646X */
+ .part_no = 0xb770,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64670000,
+ },
+ {
+ /* DM355 */
+ .part_no = 0xb73b,
+ .variant = 0x0,
+ .manufacturer = 0x00f,
+ .type = 0x03550000,
+ },
};
/*
{
u32 dev_id, part_no;
- dev_id = davinci_readl(JTAG_ID_BASE);
+ dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
{
u32 variant;
- variant = davinci_readl(JTAG_ID_BASE);
+ variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
+unsigned int davinci_rev(void)
+{
+ return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
void __init davinci_check_revision(void)
{
int i;
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
- printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+ printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+ davinci_rev(), variant);
}
--- /dev/null
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif
--- /dev/null
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
#endif
extern struct sys_timer davinci_timer;
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
--- /dev/null
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type. In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_dm ##type(void) \
+{ \
+ return (davinci_rev() == (id)) ? 1 : 0; \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif
--- /dev/null
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE (0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM644X_EMAC_MDIO_OFFSET (0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */
--- /dev/null
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT 16
+#define CCERRINT_INTERRUPT 17
+#define TCERRINT0_INTERRUPT 18
+#define TCERRINT1_INTERRUPT 19
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead. (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX 2
+#define DAVINCI_DMA_MCBSP_RX 3
+#define DAVINCI_DMA_VPSS_HIST 4
+#define DAVINCI_DMA_VPSS_H3A 5
+#define DAVINCI_DMA_VPSS_PRVU 6
+#define DAVINCI_DMA_VPSS_RSZ 7
+#define DAVINCI_DMA_IMCOP_IMXINT 8
+#define DAVINCI_DMA_IMCOP_VLCDINT 9
+#define DAVINCI_DMA_IMCO_PASQINT 10
+#define DAVINCI_DMA_IMCOP_DSQINT 11
+#define DAVINCI_DMA_SPI_SPIX 16
+#define DAVINCI_DMA_SPI_SPIR 17
+#define DAVINCI_DMA_UART0_URXEVT0 18
+#define DAVINCI_DMA_UART0_UTXEVT0 19
+#define DAVINCI_DMA_UART1_URXEVT1 20
+#define DAVINCI_DMA_UART1_UTXEVT1 21
+#define DAVINCI_DMA_UART2_URXEVT2 22
+#define DAVINCI_DMA_UART2_UTXEVT2 23
+#define DAVINCI_DMA_MEMSTK_MSEVT 24
+#define DAVINCI_DMA_MMCRXEVT 26
+#define DAVINCI_DMA_MMCTXEVT 27
+#define DAVINCI_DMA_I2C_ICREVT 28
+#define DAVINCI_DMA_I2C_ICXEVT 29
+#define DAVINCI_DMA_GPIO_GPINT0 32
+#define DAVINCI_DMA_GPIO_GPINT1 33
+#define DAVINCI_DMA_GPIO_GPINT2 34
+#define DAVINCI_DMA_GPIO_GPINT3 35
+#define DAVINCI_DMA_GPIO_GPINT4 36
+#define DAVINCI_DMA_GPIO_GPINT5 37
+#define DAVINCI_DMA_GPIO_GPINT6 38
+#define DAVINCI_DMA_GPIO_GPINT7 39
+#define DAVINCI_DMA_GPIO_GPBNKINT0 40
+#define DAVINCI_DMA_GPIO_GPBNKINT1 41
+#define DAVINCI_DMA_GPIO_GPBNKINT2 42
+#define DAVINCI_DMA_GPIO_GPBNKINT3 43
+#define DAVINCI_DMA_GPIO_GPBNKINT4 44
+#define DAVINCI_DMA_TIMER0_TINT0 48
+#define DAVINCI_DMA_TIMER1_TINT1 49
+#define DAVINCI_DMA_TIMER2_TINT2 50
+#define DAVINCI_DMA_TIMER3_TINT3 51
+#define DAVINCI_DMA_PWM0 52
+#define DAVINCI_DMA_PWM1 53
+#define DAVINCI_DMA_PWM2 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+};
+
+#endif
#include <linux/io.h>
#include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
#include <mach/irqs.h>
+#define DAVINCI_GPIO_BASE 0x01C67000
+
/*
* basic gpio routines
*
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
-#define GPIO(X) (X) /* 0 <= X <= 70 */
-#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
-#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
{
void *__iomem ptr;
- if (gpio < 32)
+ if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
- else if (gpio < 64)
+ else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
- else if (gpio < DAVINCI_N_GPIO)
+ else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ else if (gpio < 32 * 4)
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;
/*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
*
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
*
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
#define __ASM_ARCH_HARDWARE_H
/*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
*/
-#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
-#define DAVINCI_I2C_BASE (0x01C21000)
-#define DAVINCI_PWM0_BASE (0x01C22000)
-#define DAVINCI_PWM1_BASE (0x01C22400)
-#define DAVINCI_PWM2_BASE (0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
-#define DAVINCI_IEEE1394_BASE (0x01C60000)
-#define DAVINCI_USB_OTG_BASE (0x01C64000)
-#define DAVINCI_CFC_ATA_BASE (0x01C66000)
-#define DAVINCI_SPI_BASE (0x01C66800)
-#define DAVINCI_GPIO_BASE (0x01C67000)
-#define DAVINCI_UHPI_BASE (0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
-#define DAVINCI_IMCOP_BASE (0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
-#define DAVINCI_VLYNQ_BASE (0x01E01000)
-#define DAVINCI_MCBSP_BASE (0x01E02000)
-#define DAVINCI_MMC_SD_BASE (0x01E10000)
-#define DAVINCI_MS_BASE (0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */
#else
#define IOMEM(x) ((void __force __iomem *)(x))
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
- */
-#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
+#define __arch_iounmap(v) davinci_iounmap(v)
-#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+ unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
-#define DAVINCI_N_GPIO 71
+#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0 0
+#define IRQ_DM646X_VP_VERTINT1 1
+#define IRQ_DM646X_VP_VERTINT2 2
+#define IRQ_DM646X_VP_VERTINT3 3
+#define IRQ_DM646X_VP_ERRINT 4
+#define IRQ_DM646X_RESERVED_1 5
+#define IRQ_DM646X_RESERVED_2 6
+#define IRQ_DM646X_WDINT 7
+#define IRQ_DM646X_CRGENINT0 8
+#define IRQ_DM646X_CRGENINT1 9
+#define IRQ_DM646X_TSIFINT0 10
+#define IRQ_DM646X_TSIFINT1 11
+#define IRQ_DM646X_VDCEINT 12
+#define IRQ_DM646X_USBINT 13
+#define IRQ_DM646X_USBDMAINT 14
+#define IRQ_DM646X_PCIINT 15
+#define IRQ_DM646X_TCERRINT2 20
+#define IRQ_DM646X_TCERRINT3 21
+#define IRQ_DM646X_IDE 22
+#define IRQ_DM646X_HPIINT 23
+#define IRQ_DM646X_EMACRXTHINT 24
+#define IRQ_DM646X_EMACRXINT 25
+#define IRQ_DM646X_EMACTXINT 26
+#define IRQ_DM646X_EMACMISCINT 27
+#define IRQ_DM646X_MCASP0TXINT 28
+#define IRQ_DM646X_MCASP0RXINT 29
+#define IRQ_DM646X_RESERVED_3 31
+#define IRQ_DM646X_MCASP1TXINT 32
+#define IRQ_DM646X_VLQINT 38
+#define IRQ_DM646X_UARTINT2 42
+#define IRQ_DM646X_SPINT0 43
+#define IRQ_DM646X_SPINT1 44
+#define IRQ_DM646X_DSP2ARMINT 45
+#define IRQ_DM646X_RESERVED_4 46
+#define IRQ_DM646X_PSCINT 47
+#define IRQ_DM646X_GPIO0 48
+#define IRQ_DM646X_GPIO1 49
+#define IRQ_DM646X_GPIO2 50
+#define IRQ_DM646X_GPIO3 51
+#define IRQ_DM646X_GPIO4 52
+#define IRQ_DM646X_GPIO5 53
+#define IRQ_DM646X_GPIO6 54
+#define IRQ_DM646X_GPIO7 55
+#define IRQ_DM646X_GPIOBNK0 56
+#define IRQ_DM646X_GPIOBNK1 57
+#define IRQ_DM646X_GPIOBNK2 58
+#define IRQ_DM646X_DDRINT 59
+#define IRQ_DM646X_AEMIFINT 60
+
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0 0
+#define IRQ_DM355_CCDC_VDINT1 1
+#define IRQ_DM355_CCDC_VDINT2 2
+#define IRQ_DM355_IPIPE_HST 3
+#define IRQ_DM355_H3AINT 4
+#define IRQ_DM355_IPIPE_SDR 5
+#define IRQ_DM355_IPIPEIFINT 6
+#define IRQ_DM355_OSDINT 7
+#define IRQ_DM355_VENCINT 8
+#define IRQ_DM355_IMCOPINT 11
+#define IRQ_DM355_RTOINT 13
+#define IRQ_DM355_TINT4 13
+#define IRQ_DM355_TINT2_TINT12 13
+#define IRQ_DM355_UARTINT2 14
+#define IRQ_DM355_TINT5 14
+#define IRQ_DM355_TINT2_TINT34 14
+#define IRQ_DM355_TINT6 15
+#define IRQ_DM355_TINT3_TINT12 15
+#define IRQ_DM355_SPINT1_0 17
+#define IRQ_DM355_SPINT1_1 18
+#define IRQ_DM355_SPINT2_0 19
+#define IRQ_DM355_SPINT2_1 21
+#define IRQ_DM355_TINT7 22
+#define IRQ_DM355_TINT3_TINT34 22
+#define IRQ_DM355_SDIOINT0 23
+#define IRQ_DM355_MMCINT0 26
+#define IRQ_DM355_MSINT 26
+#define IRQ_DM355_MMCINT1 27
+#define IRQ_DM355_PWMINT3 28
+#define IRQ_DM355_SDIOINT1 31
+#define IRQ_DM355_SPINT0_0 42
+#define IRQ_DM355_SPINT0_1 43
+#define IRQ_DM355_GPIO0 44
+#define IRQ_DM355_GPIO1 45
+#define IRQ_DM355_GPIO2 46
+#define IRQ_DM355_GPIO3 47
+#define IRQ_DM355_GPIO4 48
+#define IRQ_DM355_GPIO5 49
+#define IRQ_DM355_GPIO6 50
+#define IRQ_DM355_GPIO7 51
+#define IRQ_DM355_GPIO8 52
+#define IRQ_DM355_GPIO9 53
+#define IRQ_DM355_GPIOBNK0 54
+#define IRQ_DM355_GPIOBNK1 55
+#define IRQ_DM355_GPIOBNK2 56
+#define IRQ_DM355_GPIOBNK3 57
+#define IRQ_DM355_GPIOBNK4 58
+#define IRQ_DM355_GPIOBNK5 59
+#define IRQ_DM355_GPIOBNK6 60
+
#endif /* __ASM_ARCH_IRQS_H */
/*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0 0
-#define DAVINCI_MUX_AEAW1 1
-#define DAVINCI_MUX_AEAW2 2
-#define DAVINCI_MUX_AEAW3 3
-#define DAVINCI_MUX_AEAW4 4
-#define DAVINCI_MUX_AECS4 10
-#define DAVINCI_MUX_AECS5 11
-#define DAVINCI_MUX_VLYNQWD0 12
-#define DAVINCI_MUX_VLYNQWD1 13
-#define DAVINCI_MUX_VLSCREN 14
-#define DAVINCI_MUX_VLYNQEN 15
-#define DAVINCI_MUX_HDIREN 16
-#define DAVINCI_MUX_ATAEN 17
-#define DAVINCI_MUX_RGB666 22
-#define DAVINCI_MUX_RGB888 23
-#define DAVINCI_MUX_LOEEN 24
-#define DAVINCI_MUX_LFLDEN 25
-#define DAVINCI_MUX_CWEN 26
-#define DAVINCI_MUX_CFLDEN 27
-#define DAVINCI_MUX_HPIEN 29
-#define DAVINCI_MUX_1394EN 30
-#define DAVINCI_MUX_EMACEN 31
-
-#define DAVINCI_MUX_LEVEL2 32
-#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+/* dm355 only */
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+struct mux_config {
+ const char *name;
+ const char *mux_reg_name;
+ const unsigned char mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+ const unsigned char mode;
+ bool debug;
+};
+
+enum davinci_dm644x_index {
+ /* ATA and HDDIR functions */
+ DM644X_HDIREN,
+ DM644X_ATAEN,
+ DM644X_ATAEN_DISABLE,
+
+ /* HPI functions */
+ DM644X_HPIEN_DISABLE,
+
+ /* AEAW functions */
+ DM644X_AEAW,
+
+ /* Memory Stick */
+ DM644X_MSTK,
+
+ /* I2C */
+ DM644X_I2C,
+
+ /* ASP function */
+ DM644X_MCBSP,
+
+ /* UART1 */
+ DM644X_UART1,
+
+ /* UART2 */
+ DM644X_UART2,
+
+ /* PWM0 */
+ DM644X_PWM0,
+
+ /* PWM1 */
+ DM644X_PWM1,
+
+ /* PWM2 */
+ DM644X_PWM2,
+
+ /* VLYNQ function */
+ DM644X_VLYNQEN,
+ DM644X_VLSCREN,
+ DM644X_VLYNQWD,
+
+ /* EMAC and MDIO function */
+ DM644X_EMACEN,
+
+ /* GPIO3V[0:16] pins */
+ DM644X_GPIO3V,
+
+ /* GPIO pins */
+ DM644X_GPIO0,
+ DM644X_GPIO3,
+ DM644X_GPIO43_44,
+ DM644X_GPIO46_47,
+
+ /* VPBE */
+ DM644X_RGB666,
+
+ /* LCD */
+ DM644X_LOEEN,
+ DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+ /* ATA function */
+ DM646X_ATAEN,
+
+ /* AUDIO Clock */
+ DM646X_AUDCK1,
+ DM646X_AUDCK0,
+
+ /* CRGEN Control */
+ DM646X_CRGMUX,
+
+ /* VPIF Control */
+ DM646X_STSOMUX_DISABLE,
+ DM646X_STSIMUX_DISABLE,
+ DM646X_PTSOMUX_DISABLE,
+ DM646X_PTSIMUX_DISABLE,
+
+ /* TSIF Control */
+ DM646X_STSOMUX,
+ DM646X_STSIMUX,
+ DM646X_PTSOMUX_PARALLEL,
+ DM646X_PTSIMUX_PARALLEL,
+ DM646X_PTSOMUX_SERIAL,
+ DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+ /* MMC/SD 0 */
+ DM355_MMCSD0,
+
+ /* MMC/SD 1 */
+ DM355_SD1_CLK,
+ DM355_SD1_CMD,
+ DM355_SD1_DATA3,
+ DM355_SD1_DATA2,
+ DM355_SD1_DATA1,
+ DM355_SD1_DATA0,
+
+ /* I2C */
+ DM355_I2C_SDA,
+ DM355_I2C_SCL,
+
+ /* ASP0 function */
+ DM355_MCBSP0_BDX,
+ DM355_MCBSP0_X,
+ DM355_MCBSP0_BFSX,
+ DM355_MCBSP0_BDR,
+ DM355_MCBSP0_R,
+ DM355_MCBSP0_BFSR,
+
+ /* SPI0 */
+ DM355_SPI0_SDI,
+ DM355_SPI0_SDENA0,
+ DM355_SPI0_SDENA1,
+
+ /* IRQ muxing */
+ DM355_INT_EDMA_CC,
+ DM355_INT_EDMA_TC0_ERR,
+ DM355_INT_EDMA_TC1_ERR,
+
+ /* EDMA event muxing */
+ DM355_EVT8_ASP1_TX,
+ DM355_EVT9_ASP1_RX,
+ DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
-#define DAVINCI_LPSC_MDIO 7
-#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
-#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DM355_LPSC_TIMER3 5
+#define DM355_LPSC_SPI1 6
+#define DM355_LPSC_MMC_SD1 7
+#define DM355_LPSC_McBSP1 8
+#define DM355_LPSC_PWM3 10
+#define DM355_LPSC_SPI2 11
+#define DM355_LPSC_RTO 12
+#define DM355_LPSC_VPSS_DAC 41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM 0
+#define DM646X_LPSC_C64X_CPU 1
+#define DM646X_LPSC_HDVICP0 2
+#define DM646X_LPSC_HDVICP1 3
+#define DM646X_LPSC_TPCC 4
+#define DM646X_LPSC_TPTC0 5
+#define DM646X_LPSC_TPTC1 6
+#define DM646X_LPSC_TPTC2 7
+#define DM646X_LPSC_TPTC3 8
+#define DM646X_LPSC_PCI 13
+#define DM646X_LPSC_EMAC 14
+#define DM646X_LPSC_VDCE 15
+#define DM646X_LPSC_VPSSMSTR 16
+#define DM646X_LPSC_VPSSSLV 17
+#define DM646X_LPSC_TSIF0 18
+#define DM646X_LPSC_TSIF1 19
+#define DM646X_LPSC_DDR_EMIF 20
+#define DM646X_LPSC_AEMIF 21
+#define DM646X_LPSC_McASP0 22
+#define DM646X_LPSC_McASP1 23
+#define DM646X_LPSC_CRGEN0 24
+#define DM646X_LPSC_CRGEN1 25
+#define DM646X_LPSC_UART0 26
+#define DM646X_LPSC_UART1 27
+#define DM646X_LPSC_UART2 28
+#define DM646X_LPSC_PWM0 29
+#define DM646X_LPSC_PWM1 30
+#define DM646X_LPSC_I2C 31
+#define DM646X_LPSC_SPI 32
+#define DM646X_LPSC_GPIO 33
+#define DM646X_LPSC_TIMER0 34
+#define DM646X_LPSC_TIMER1 35
+#define DM646X_LPSC_ARM_INTC 45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+ char enable);
+
#endif /* __ASM_ARCH_PSC_H */
#include <mach/io.h>
-#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS 3
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU 0x0c
+#define UART_DM646X_SCR 0x10
+#define UART_DM646X_SCR_TX_WATERMARK 0x08
+
+struct davinci_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
davinci_check_revision();
}
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+ if (BETWEEN(p, IO_PHYS, IO_SIZE))
+ return XLATE(p, IO_PHYS, IO_VIRT);
+
+ return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
{
- davinci_clk_init();
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
}
+EXPORT_SYMBOL(davinci_iounmap);
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
+const u8 *davinci_def_priorities;
+
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
static inline unsigned int davinci_irq_readl(int offset)
{
- return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+ return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+ __raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
.unmask = davinci_unmask_irq,
};
-
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
[IRQ_EMUINT] = 7,
};
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
- const u8 *priority = default_priorities;
+
+ if (cpu_is_davinci_dm644x())
+ davinci_def_priorities = dm644x_default_priorities;
+ else if (cpu_is_davinci_dm646x())
+ davinci_def_priorities = dm646x_default_priorities;
+ else if (cpu_is_davinci_dm355())
+ davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
unsigned j;
u32 pri;
- for (j = 0, pri = 0; j < 32; j += 4, priority++)
- pri |= (*priority & 0x07) << j;
+ for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+ pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}
/*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
-
#include <mach/mux.h>
-/* System control register offsets */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+ unsigned long size)
+{
+ mux_table = pins;
+ pin_table_sz = size;
-static DEFINE_SPINLOCK(mux_lock);
+ return 0;
+}
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
{
- u32 pinmux, muxreg = PINMUX0;
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ unsigned long flags;
+ const struct mux_config *cfg;
+ unsigned int reg_orig = 0, reg = 0;
+ unsigned int mask, warn = 0;
+
+ if (!mux_table)
+ BUG();
+
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ cfg = &mux_table[index];
+
+ if (cfg->name == NULL) {
+ printk(KERN_ERR "No entry for the specified index\n");
+ return -ENODEV;
+ }
+
+ /* Update the mux register in question */
+ if (cfg->mask) {
+ unsigned tmp1, tmp2;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg_orig = __raw_readl(base + cfg->mux_reg);
+
+ mask = (cfg->mask << cfg->mask_offset);
+ tmp1 = reg_orig & mask;
+ reg = reg_orig & ~mask;
+
+ tmp2 = (cfg->mode << cfg->mask_offset);
+ reg |= tmp2;
+
+ if (tmp1 != tmp2)
+ warn = 1;
+
+ __raw_writel(reg, base + cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+ printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+ }
- if (mux >= DAVINCI_MUX_LEVEL2) {
- muxreg = PINMUX1;
- mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+ if (cfg->debug || warn) {
+ printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+ printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
+#endif
- spin_lock(&mux_lock);
- pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- if (enable)
- pinmux |= (1 << mux);
- else
- pinmux &= ~(1 << mux);
- davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- spin_unlock(&mux_lock);
+ return 0;
}
+EXPORT_SYMBOL(davinci_cfg_reg);
--- /dev/null
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "PINMUX"#muxreg, \
+ .mux_reg = PINMUX##muxreg, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "INTMUX", \
+ .mux_reg = INTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "EVTMUX", \
+ .mux_reg = EVTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#endif /* _MACH_DAVINCI_MUX_H */
#include <linux/init.h>
#include <linux/io.h>
+#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
#define MDSTAT 0x800
#define MDCTL 0xA00
-/* System control register offsets */
-#define VDD3P3V_PWDN 0x48
+#define MDSTAT_STATE_MASK 0x1f
-static void davinci_psc_mux(unsigned int id)
+/* Return nonzero iff the domain's clock is active */
+int __init davinci_psc_is_clk_active(unsigned int id)
{
- switch (id) {
- case DAVINCI_LPSC_ATA:
- davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
- davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
- break;
- case DAVINCI_LPSC_MMC_SD:
- /* VDD power manupulations are done in U-Boot for CPMAC
- * so applies to MMC as well
- */
- /*Set up the pull regiter for MMC */
- davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
- davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
- break;
- case DAVINCI_LPSC_I2C:
- davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
- break;
- case DAVINCI_LPSC_McBSP:
- davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
- break;
- default:
- break;
- }
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+
+ /* if clocked, state can be "Enable" or "SyncReset" */
+ return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
- mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
- if (enable)
- mdctl |= 0x00000003; /* Enable Module */
- else
- mdctl &= 0xFFFFFFF2; /* Disable Module */
- davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+ mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ __raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+ pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- EPCPR);
+ epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- PTSTAT);
+ ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
- if (enable)
- mdstat_mask = 0x3;
- else
- mdstat_mask = 0x2;
-
do {
- mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- MDSTAT + 4 * id);
- } while (!((mdstat & 0x0000001F) == mdstat_mask));
-
- if (enable)
- davinci_psc_mux(id);
-}
-
-void __init davinci_psc_init(void)
-{
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
-
- /* Turn on WatchDog timer LPSC. Needed for RESET to work */
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include "clock.h"
-#define UART_DAVINCI_PWREMU 0x0c
-
-static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
- int offset)
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+ int offset)
{
offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
+ return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
-static inline void davinci_serial_outp(struct plat_serial8250_port *p,
- int offset, int value)
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+ int value)
{
offset <<= p->regshift;
- __raw_writeb(value, p->membase + offset);
+ __raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
- .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = 27000000,
},
{
.flags = 0
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
- /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
- davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+ serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+ if (cpu_is_davinci_dm646x())
+ serial_write_reg(p, UART_DM646X_SCR,
+ UART_DM646X_SCR_TX_WATERMARK);
+}
+
+void __init davinci_serial_init(struct davinci_uart_config *info)
+{
+ int i;
+ char name[16];
+ struct clk *uart_clk;
+ struct device *dev = &serial_device.dev;
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
+ struct plat_serial8250_port *p = serial_platform_data + i;
+
+ if (!(info->enabled_uarts & (1 << i))) {
+ p->flags = 0;
+ continue;
+ }
+
+ if (cpu_is_davinci_dm646x())
+ p->iotype = UPIO_MEM32;
+
+ if (cpu_is_davinci_dm355()) {
+ if (i == 2) {
+ p->mapbase = (unsigned long)DM355_UART2_BASE;
+ p->irq = IRQ_DM355_UARTINT2;
+ }
+ }
+
+ sprintf(name, "uart%d", i);
+ uart_clk = clk_get(dev, name);
+ if (IS_ERR(uart_clk))
+ printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ else {
+ clk_enable(uart_clk);
+ p->uartclk = clk_get_rate(uart_clk);
+ davinci_serial_reset(p);
+ }
+ }
}
static int __init davinci_init(void)
{
- davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
+#include <mach/cputype.h>
+#include "clock.h"
static struct clock_event_device clockevent_davinci;
+static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
unsigned int id;
unsigned long period;
unsigned long opts;
- unsigned long reg_base;
- unsigned long tim_reg;
- unsigned long prd_reg;
+ void __iomem *base;
+ unsigned long tim_off;
+ unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
static int timer32_config(struct timer_s *t)
{
- u32 tcr = davinci_readl(t->reg_base + TCR);
+ u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
- davinci_writel(0, t->tim_reg);
- davinci_writel(t->period, t->prd_reg);
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
- return davinci_readl(t->tim_reg);
+ return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
static void __init timer_init(void)
{
- u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
- u32 tgcr, base = bases[i];
+ u32 tgcr;
+ void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
+ u32 phys_base;
if (t->name) {
t->id = i;
- t->reg_base = (IS_TIMER1(t->id) ?
+ phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+ t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
- t->tim_reg = t->reg_base + TIM12;
- t->prd_reg = t->reg_base + PRD12;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
- t->tim_reg = t->reg_base + TIM34;
- t->prd_reg = t->reg_base + PRD34;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
}
/* Register interrupt */
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- t->period = CLOCK_TICK_RATE / (HZ);
+ t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
static void __init davinci_timer_init(void)
{
+ struct clk *timer_clk;
+
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
+ timer_clk = clk_get(NULL, "timer0");
+ BUG_ON(IS_ERR(timer_clk));
+ clk_enable(timer_clk);
+
+ davinci_clock_tick_rate = clk_get_rate(timer_clk);
+
/* setup clocksource */
clocksource_davinci.mult =
- clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
- clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
- u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+ u32 tgcr, wdtcr;
+ void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+ struct device dev;
+ struct clk *wd_clk;
+ char *name = "watchdog";
+
+ dev_set_name(&dev, name);
+ wd_clk = clk_get(&dev, NULL);
+ if (WARN_ON(IS_ERR(wd_clk)))
+ return;
+ clk_enable(wd_clk);
/* disable, internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
- davinci_writel(0, base + PRD12);
- davinci_writel(0, base + PRD34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
+ __raw_writel(0, base + PRD12);
+ __raw_writel(0, base + PRD34);
/* enable */
- wdtcr = davinci_readl(base + WDTCR);
+ wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
}
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },
#ifndef _IMX_GPIO_H
#include <linux/kernel.h>
+#include <mach/hardware.h>
#include <mach/imx-regs.h>
#define IMX_GPIO_ALLOC_MODE_NORMAL 0
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/mvsdio.h>
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+#endif
* published by the Free Software Foundation.
*/
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
* warranty of any kind, whether express or implied.
*/
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-
/*
* Register Map
*/
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include <asm/gpio.h>
#include "common.h"
/*
* CPU Address Decode Windows registers
*/
+#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4))
--- /dev/null
+/*
+ * arch/arm/mach-loki/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/loki.h>
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR 0x0004
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF 0x0000
+#define IRQ_MASK_OFF 0x0004
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR 0x0004
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_OFF 0x0000
-#define IRQ_MASK_OFF 0x0004
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
--- /dev/null
+/*
+ * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/mv78xx0.h>
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH 0x00020000
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF 0x0000
+#define IRQ_CAUSE_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_ERR_OFF 0x000c
+#define IRQ_MASK_LOW_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define L2_WRITETHROUGH 0x00020000
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_ERR_OFF 0x0000
-#define IRQ_CAUSE_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0008
-#define IRQ_MASK_ERR_OFF 0x000c
-#define IRQ_MASK_LOW_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID 0x6381
-#define MV78X00_REV_Z0 1
-
-#define MV78100_DEV_ID 0x7810
-#define MV78100_REV_A0 1
-
-#define MV78200_DEV_ID 0x7820
-#define MV78200_REV_A0 1
/*
* Register Map
#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID 0x6381
+#define MV78X00_REV_Z0 1
+
+#define MV78100_DEV_ID 0x7810
+#define MV78100_REV_A0 1
+
+#define MV78200_DEV_ID 0x7820
+#define MV78200_REV_A0 1
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/gpio.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
static int mmc_late_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+ int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return ret;
return ret;
}
-static void mmc_shutdown(struct device *dev)
+static void mmc_cleanup(struct device *dev)
{
gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
}
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
- .shutdown = mmc_shutdown,
+ .cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
-#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
.resource = h3_kp_resources,
};
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x26))) {
- printk(KERN_ERR "Error reading from I/O EXPANDER \n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDA */
- if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x03;
-
- if (mode & IR_SIRMODE) {
- expa |= 0x01;
- } else { /* MIR/FIR */
- expa |= 0x03;
- }
-
- if ((err = write_gpio_expa(expa, 0x27)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h3_transceiver_mode,
- .select_irda = h3_select_irda,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
-};
-
-static struct resource h3_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
- .name = "omapirda",
- .id = 0,
- .dev = {
- .platform_data = &h3_irda_data,
- .dma_mask = &irda_dmamask,
- },
- .num_resources = ARRAY_SIZE(h3_irda_resources),
- .resource = h3_irda_resources,
-};
-
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
&nand_device,
&smc91x_device,
&intlat_device,
- &h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
- else
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
-
+ gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
return 0;
}
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (dsp_use++ == 0) {
- api_clk = clk_get(NULL, "api_clk");
- dsp_clk = clk_get(NULL, "dsp_clk");
+ api_clk = clk_get(NULL, "api_ck");
+ dsp_clk = clk_get(NULL, "dsp_ck");
if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
clk_enable(api_clk);
clk_enable(dsp_clk);
#include <mach/control.h>
#include <mach/gpio.h>
-#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
-#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
.resource = &h4_flash_resource,
};
-/* Select between the IrDA and aGPS module
- */
-static int h4_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x21))) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDa */
- if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x01;
-
- if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
- expa |= 0x01;
- }
-
- if ((err = write_gpio_expa(expa, 0x20)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h4_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h4_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h4_transceiver_mode,
- .select_irda = h4_select_irda,
- .rx_channel = OMAP24XX_DMA_UART3_RX,
- .tx_channel = OMAP24XX_DMA_UART3_TX,
- .dest_start = OMAP_UART3_BASE,
- .src_start = OMAP_UART3_BASE,
- .tx_trigger = OMAP24XX_DMA_UART3_TX,
- .rx_trigger = OMAP24XX_DMA_UART3_RX,
-};
-
-static struct resource h4_irda_resources[] = {
- [0] = {
- .start = INT_24XX_UART3_IRQ,
- .end = INT_24XX_UART3_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h4_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &h4_irda_data,
- },
- .num_resources = 1,
- .resource = h4_irda_resources,
-};
-
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
- &h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include <mach/timer-gp.h>
#include "mmc-twl4030.h"
{
omap2_init_common_hw(NULL);
omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
omap_gpio_init();
}
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
}, \
}
-#define CK_243X (1 << 0)
-#define CK_242X (1 << 1)
+#define CK_243X RATE_IN_243X
+#define CK_242X RATE_IN_242X
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
{
struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate, cpu_mask;
+ u32 clkrate;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
clk_init(&omap2_clk_functions);
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
-
- cpu_mask = 0;
- if (cpu_is_omap2420())
- cpu_mask |= CK_242X;
- if (cpu_is_omap2430())
- cpu_mask |= CK_243X;
-
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
.clkdm_name = "wkup_clkdm",
};
+static struct clk secure_32k_ck = {
+ .name = "secure_32k_ck",
+ .ops = &clkops_null,
+ .rate = 32768,
+ .flags = RATE_FIXED,
+ .clkdm_name = "wkup_clkdm",
+};
+
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
+ .parent = &secure_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
static struct clk cam_mclk = {
.name = "cam_mclk",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
/* SECURE_32K_FCK clocks */
-/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-#include <mach/eac.h>
#include <mach/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static inline void omap_init_mcspi(void) {}
#endif
-#ifdef CONFIG_SND_OMAP24XX_EAC
-
-#define OMAP2_EAC_BASE 0x48090000
-
-static struct resource omap2_eac_resources[] = {
- {
- .start = OMAP2_EAC_BASE,
- .end = OMAP2_EAC_BASE + 0x109,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap2_eac_device = {
- .name = "omap24xx-eac",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap2_eac_resources),
- .resource = omap2_eac_resources,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-void omap_init_eac(struct eac_platform_data *pdata)
-{
- omap2_eac_device.dev.platform_data = pdata;
- platform_device_register(&omap2_eac_device);
-}
-
-#else
-void omap_init_eac(struct eac_platform_data *pdata) {}
-#endif
-
#ifdef CONFIG_OMAP_SHA1_MD5
static struct resource sha1_md5_resources[] = {
{
u32 sir, spurious;
sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
- spurious = sir >> 6;
+ spurious = sir >> 7;
- if (spurious > 1) {
+ if (spurious) {
printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
"posted write for irq %i\n",
irq, sir, previous_irq);
*
* OMAP2 GP timer support.
*
+ * Copyright (C) 2009 Nokia Corporation
+ *
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID 12
+
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
+static u8 __initdata gptimer_id = 1;
+static u8 __initdata inited;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
.set_mode = omap2_gp_timer_set_mode,
};
+/**
+ * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
+ * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
+ *
+ * Define the GPTIMER that the system should use for the tick timer.
+ * Meant to be called from board-*.c files in the event that GPTIMER1, the
+ * default, is unsuitable. Returns -EINVAL on error or 0 on success.
+ */
+int __init omap2_gp_clockevent_set_gptimer(u8 id)
+{
+ if (id < 1 || id > MAX_GPTIMER_ID)
+ return -EINVAL;
+
+ BUG_ON(inited);
+
+ gptimer_id = id;
+
+ return 0;
+}
+
static void __init omap2_gp_clockevent_init(void)
{
u32 tick_rate;
+ int src;
+
+ inited = 1;
- gptimer = omap_dm_timer_request_specific(1);
+ gptimer = omap_dm_timer_request_specific(gptimer_id);
BUG_ON(gptimer == NULL);
#if defined(CONFIG_OMAP_32K_TIMER)
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ src = OMAP_TIMER_SRC_32_KHZ;
#else
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ src = OMAP_TIMER_SRC_SYS_CLK;
+ WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
+ "secure 32KiHz clock source\n");
#endif
+
+ if (gptimer_id != 12)
+ WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
+ "timer-gp: omap_dm_timer_set_source() failed\n");
+
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
+ gptimer_id, tick_rate);
+
omap2_gp_timer_irq.dev_id = (void *)gptimer;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
clockevents_register_device(&clockevent_gpt);
}
+/* Clocksource code */
+
#ifdef CONFIG_OMAP_32K_TIMER
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
unsigned sysclk_ps;
int status;
- if (!refclk_psec)
+ if (!refclk_psec || sysclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
/*
* Helpers to get DDR bank info
*/
+#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
+#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/bridge-regs.h
+ *
+ * Orion CPU Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/orion5x.h>
+
+#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100)
+
+#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
+
+#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET 0x0002
+
+#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+
+#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+
+#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define WDT_INT_REQ 0x0008
+
+#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
+
+#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
+
+#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000
#define ORION5X_PCI_MEM_SIZE SZ_128M
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID 0x5181
-#define MV88F5181_REV_B1 3
-#define MV88F5181L_REV_A0 8
-#define MV88F5181L_REV_A1 9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID 0x5182
-#define MV88F5182_REV_A2 2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID 0x5281
-#define MV88F5281_REV_D0 4
-#define MV88F5281_REV_D1 5
-#define MV88F5281_REV_D2 6
-/* Orion-1-90 (88F6183) */
-#define MV88F6183_DEV_ID 0x6183
-#define MV88F6183_REV_B0 3
-
/*******************************************************************************
* Orion Registers Map
******************************************************************************/
+
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
-#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x))
#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
-#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x))
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x))
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x))
/*******************************************************************************
* Device Bus Registers
#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0)
#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4)
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108)
-#define WDT_RESET 0x0002
-#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110)
-#define WDT_INT_REQ 0x0008
-#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
-
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID 0x5181
+#define MV88F5181_REV_B1 3
+#define MV88F5181L_REV_A0 8
+#define MV88F5181L_REV_A1 9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID 0x5182
+#define MV88F5182_REV_A2 2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D0 4
+#define MV88F5281_REV_D1 5
+#define MV88F5281_REV_D2 6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID 0x6183
+#define MV88F6183_REV_B0 3
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/gpio.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* PCI controller
****************************************************************************/
+#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
#define PCI_MODE ORION5X_PCI_REG(0xd00)
#define PCI_CMD ORION5X_PCI_REG(0xc00)
#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
.num_chipselect = 3,
};
+static void corgi_wait_for_hsync(void)
+{
+ while (gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
+ .wait_for_sync = corgi_wait_for_hsync,
};
static void corgi_ads7846_cs(u32 command)
#include <sound/core.h>
#include <sound/pcm.h>
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ * a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
typedef struct {
int (*startup)(struct snd_pcm_substream *, void *);
void (*shutdown)(struct snd_pcm_substream *, void *);
void (*suspend)(void *);
void (*resume)(void *);
void *priv;
+ int reset_gpio;
} pxa2xx_audio_ops_t;
extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
#ifndef _INCLUDE_PALMASOC_H_
#define _INCLUDE_PALMASOC_H_
+
struct palm27x_asoc_info {
int jack_gpio;
};
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
#endif
},
};
+static struct da9034_touch_pdata littleton_da9034_touch = {
+ .x_inverted = 1,
+ .interval_ms = 20,
+};
+
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ }, {
+ .name = "da9034-touch",
+ .id = DA9034_ID_TOUCH,
+ .platform_data = &littleton_da9034_touch,
},
};
.fast_mode = 1,
};
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+ .reset_gpio = 95,
+};
+
/*
* Mio global
*/
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
/******************************************************************************
* aSoC audio
******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
};
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmld_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
&palmld_backlight,
&palmld_leds,
&power_supply,
+ &palmld_asoc,
};
static struct map_desc palmld_io_desc[] __initdata = {
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&palmld_ac97_pdata);
pxa_set_ficp_info(&palmld_ficp_platform_data);
pxa_set_keypad_info(&palmld_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
- palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
/******************************************************************************
* aSoC audio
******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
};
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmt5_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
#endif
&palmt5_backlight,
&power_supply,
+ &palmt5_asoc,
};
/* setup udc GPIOs initial state */
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
palmt5_udc_init();
+ pxa_set_ac97_info(&palmt5_ac97_pdata);
pxa_set_udc_info(&palmt5_udc_info);
- pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmt5_ficp_platform_data);
pxa_set_keypad_info(&palmt5_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
- palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
+#include <mach/palmasoc.h>
#include "generic.h"
#include "devices.h"
.batt_name = "main-batt",
};
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmtx_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
#endif
&palmtx_backlight,
&power_supply,
+ &palmtx_asoc,
};
static struct map_desc palmtx_io_desc[] __initdata = {
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
palmtx_udc_init();
+ pxa_set_ac97_info(&palmtx_ac97_pdata);
pxa_set_udc_info(&palmtx_udc_info);
- pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
#include <linux/i2c/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
- .gpio_base = NR_BUILTIN_GPIO + 1,
+ .gpio_base = NR_BUILTIN_GPIO,
};
static int gpio_bus_switch;
int ret;
if (!gpio_bus_switch) {
- ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+ ret = gpio_request(NR_BUILTIN_GPIO, "camera");
if (!ret) {
- gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+ gpio_bus_switch = NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
} else
gpio_bus_switch = -EINVAL;
.num_chipselect = 3,
};
+static void spitz_wait_for_hsync(void)
+{
+ while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = SPITZ_GPIO_TP_INT,
+ .wait_for_sync = spitz_wait_for_hsync,
};
static void spitz_ads7846_cs(u32 command)
GPIO25_AC97_SDATA_IN_0,
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO91_SSP3_SCLK,
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* GPIO */
+ GPIO18_GPIO, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO89_SSP3_SCLK,
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
+#ifdef CONFIG_ARM_ERRATA_411920
+/*
+ * Invalidate the entire I cache (this code is a workaround for the ARM1136
+ * erratum 411920 - Invalidate Instruction Cache operation can fail. This
+ * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *
+ * Registers:
+ * r0 - set to 0
+ * r1 - corrupted
+ */
+ENTRY(v6_icache_inval_all)
+ mov r0, #0
+ mrs r1, cpsr
+ cpsid ifa @ disable interrupts
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ msr cpsr_cx, r1 @ restore interrupts
+ .rept 11 @ ARM Ltd recommends at least
+ nop @ 11 NOPs
+ .endr
+ mov pc, lr
+#endif
+
/*
* v6_flush_cache_all()
*
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ b v6_icache_inval_all
+#endif
#else
mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
#endif
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ b v6_icache_inval_all
+#endif
#else
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
#include "mm.h"
+#ifdef CONFIG_ARM_ERRATA_411920
+extern void v6_icache_inval_all(void);
+#endif
+
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcr p15, 0, %2, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %2, c7, c5, 0\n"
+#endif
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
void flush_cache_mm(struct mm_struct *mm)
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
*
* This is the "shell" of the ARMv6 processor support.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
.asciz "ARMv6-compatible processor"
.align
- .section ".text.init", #alloc, #execinstr
+ __INIT
/*
* __v6_setup
*
* This is the "shell" of the ARMv7 processor support.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_FLAGS
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
.ascii "ARMv7 Processor"
.align
- .section ".text.init", #alloc, #execinstr
+ __INIT
/*
* __v7_setup
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+#ifdef CONFIG_ARM_ERRATA_430973
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 6) @ set IBE to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_458693
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 5) @ set L1NEON to 1
+ orr r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_460075
+ mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+#endif
mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
mov pc, lr
- .section ".text.init", #alloc, #execinstr
+ __INIT
.type v6wbi_tlb_fns, #object
ENTRY(v6wbi_tlb_fns)
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
mov pc, lr
ENDPROC(v7wbi_flush_kern_tlb_range)
- .section ".text.init", #alloc, #execinstr
+ __INIT
.type v7wbi_tlb_fns, #object
ENTRY(v7wbi_tlb_fns)
}
}
+/**
+ * clk_init_one - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
void clk_init_one(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
{
unsigned long flags;
- spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
- dma_chan[lch].dev_id = -1;
- dma_chan[lch].next_lch = -1;
- dma_chan[lch].callback = NULL;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
}
EXPORT_SYMBOL(omap_free_dma);
{ .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 },
+ { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
};
static const char *omap3_dm_source_names[] __initdata = {
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
/*
- * Enable wake-up only for GPT1 on OMAP2 CPUs.
- * FIXME: All timers should have wake-up enabled and clear
- * PRCM status.
+ * Enable wake-up on OMAP2 CPUs.
*/
- if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
+ if (cpu_class_is_omap2())
l |= 1 << 2;
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
#ifdef CONFIG_ARCH_OMAP1
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;
u32 l;
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret = -EINVAL;
+
if (source < 0 || source >= 3)
- return;
+ return -EINVAL;
clk_disable(timer->fclk);
- clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
clk_enable(timer->fclk);
- /* When the functional clock disappears, too quick writes seem to
- * cause an abort. */
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
__delay(150000);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
if (cpu_is_omap24xx() || cpu_is_omap34xx())
- __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
+ __raw_writel(gpio_mask, reg);
+
+ /* Flush posted write for the irq status to avoid spurious interrupts */
+ __raw_readl(reg);
#endif
}
case METHOD_MPUIO:
case METHOD_GPIO_1610:
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
return -EINVAL;
}
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK 0x100
-enum eac_mclk_src {
- EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
- EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
- EAC_MCLK_EXT_12288000,
- EAC_MCLK_EXT_2x11289600,
- EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
- EAC_CODEC_PCM,
- EAC_CODEC_AC97,
- EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
- EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
- /* if enabled, then first data slot (left channel) is signaled as
- * positive level of frame sync EAC.AC_FS */
- unsigned polarity_changed_mode:1;
- /* if enabled, then serial data starts one clock cycle after the
- * of EAC.AC_FS for first audio slot */
- unsigned sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
- enum eac_mclk_src mclk_src;
-
- enum eac_codec_mode codec_mode;
- union {
- struct eac_i2s_conf i2s;
- } codec_conf;
-
- int default_rate; /* audio sampling rate */
-
- int (* set_power)(void *private_data, int dac, int adc);
- int (* register_controls)(void *private_data,
- struct snd_card *card);
- const char *short_name;
-
- void *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
- int (* init)(struct device *eac_dev);
- void (* cleanup)(struct device *eac_dev);
- /* these callbacks are used to configure & control external MCLK
- * source. NULL if not used */
- int (* enable_ext_clocks)(struct device *eac_dev);
- void (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
- return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
int transceiver_cap;
int (*transceiver_mode)(struct device *dev, int mode);
int (*select_irda)(struct device *dev, int state);
- /* Very specific to the needs of some platforms (h3,h4)
- * having calls which can sleep in irda_set_speed.
- */
- struct delayed_work gpio_expa;
int rx_channel;
int tx_channel;
unsigned long dest_start;
/* use the internal clock */
unsigned internal_clock:1;
- s16 power_pin;
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
--- /dev/null
+/*
+ * OMAP2/3 GPTIMER support.headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+
+int __init omap2_gp_clockevent_set_gptimer(u8 id);
+
+#endif
+
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
/*
* Number of timer ticks per jiffy.
return -ENOMEM;
}
+ memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
+
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
return 0;
}
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct pxa_gpio_chip *c;
else
c->irq_edge_fall &= ~mask;
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
struct pxa_gpio_chip *c = gpio_to_chip(gpio);
c->irq_mask |= GPIO_bit(gpio);
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
}
static struct irq_chip pxa_muxed_gpio_chip = {
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/
-CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
-
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
.PHONY: $(BOOT_TARGETS) install
do { \
__debug_bug_trap(signr); \
asm volatile("nop"); \
-} while(0)
+} while(1)
#define HAVE_ARCH_BUG
#define BUG() \
#define HAVE_ARCH_KGDB_BAD_PAGE
#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
#endif
-#endif
+
+#endif /* CONFIG_BUG */
#include <asm-generic/bug.h>
+++ /dev/null
-#ifndef _ASM_INIT_H
-#define _ASM_INIT_H
-
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
-/* For assembly routines */
-#define __INIT .section ".text.init",#alloc,#execinstr
-#define __FINIT .previous
-#define __INITDATA .section ".data.init",#alloc,#write
-
-#endif
-
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
#ifdef __KERNEL__
-#define NR_syscalls 333
+#define NR_syscalls 335
#define __ARCH_WANT_IPC_PARSE_VERSION
/* #define __ARCH_WANT_OLD_READDIR */
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
syscall_table_size = (. - sys_call_table)
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __551_LCR 0xfeff1100
#define __551_LSBR 0xfeff1c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
# command line string
#
###############################################################################
- .section .text.head,"ax"
+ __HEAD
.balign 4
.globl _boot, __head_reference
_sinittext = .;
.init.text : {
- *(.text.head)
+ HEAD_TEXT
#ifndef CONFIG_DEBUG_INFO
INIT_TEXT
EXIT_TEXT
--- /dev/null
+#ifndef _ASM_IA64_IDLE_H
+#define _ASM_IA64_IDLE_H
+
+static inline void enter_idle(void) { }
+static inline void exit_idle(void) { }
+
+#endif /* _ASM_IA64_IDLE_H */
return !(ia64_psr(regs)->i);
}
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+static inline void handle_irq(int irq, struct pt_regs *regs)
{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- irq_enter();
__do_IRQ(irq);
- irq_exit();
- set_irq_regs(old_regs);
}
#define irq_ctx_init(cpu) do { } while (0)
int r;
again:
- preempt_disable();
- local_irq_disable();
-
if (signal_pending(current)) {
- local_irq_enable();
- preempt_enable();
r = -EINTR;
kvm_run->exit_reason = KVM_EXIT_INTR;
goto out;
}
+ /*
+ * down_read() may sleep and return with interrupts enabled
+ */
+ down_read(&vcpu->kvm->slots_lock);
+
+ preempt_disable();
+ local_irq_disable();
+
vcpu->guest_mode = 1;
kvm_guest_enter();
- down_read(&vcpu->kvm->slots_lock);
r = vti_vcpu_run(vcpu, kvm_run);
if (r < 0) {
local_irq_enable();
#define isBP p3 // are we the Bootstrap Processor?
- .text
-
GLOBAL_ENTRY(xen_setup_hook)
mov r8=XEN_PV_DOMAIN_ASM
(isBP) movl r9=xen_domain_type;;
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
piggy.o vmlinux.lds
-EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
* This file contains M32R architecture specific macro definitions.
*/
+#include <linux/stringify.h>
+
+#undef __STR
-#ifndef __STR
#ifdef __ASSEMBLY__
#define __STR(x) x
#else
-#define __STR(x) #x
+#define __STR(x) __stringify(x)
#endif
-#endif /* __STR */
#ifdef CONFIG_SMP
#define M32R_LOCK __STR(lock)
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_MODULES) += module.o
-
-EXTRA_AFLAGS := -traditional
/*
* References to members of the boot_cpu_data structure.
*/
-.section .text.head, "ax"
+__HEAD
.global start_kernel
.global __bss_start
.global _end
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:42 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:52 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
#
# Serial drivers
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
+CONFIG_SERIAL_CONSOLE=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:43 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:54 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:44 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:56 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_ATARI_KBD_CORE=y
CONFIG_KEYBOARD_ATARI=y
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
+CONFIG_SERIAL_CONSOLE=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:45 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:59 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_BVME6000_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:46 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:01 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_HPLANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:47 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:03 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_SWIM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_MACSONIC=m
CONFIG_MACMACE=y
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:48 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:06 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_SWIM=y
CONFIG_AMIGA_Z2RAM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
CONFIG_BLK_DEV_FALCON_IDE=y
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
+CONFIG_MAC89x0=y
+CONFIG_MACSONIC=y
CONFIG_MACMACE=y
CONFIG_MVME147_NET=y
CONFIG_MVME16x_NET=y
CONFIG_BVME6000_NET=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
CONFIG_SUN3LANCE=y
CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_KEYBOARD_HIL_OLD=y
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_AMIGA=m
CONFIG_MOUSE_ATARI=m
# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
+CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=m
+CONFIG_HP_SDC_RTC=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=m
+CONFIG_SERIO_Q40KBD=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
#
# Serial drivers
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:50 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:08 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MVME147_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:51 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:10 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MVME16x_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:52 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:13 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:53 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:16 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
CONFIG_SUN3_82586=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:54 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:20 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#define __NR_dup3 326
#define __NR_pipe2 327
#define __NR_inotify_init1 328
+#define __NR_preadv 329
+#define __NR_pwritev 330
#ifdef __KERNEL__
-#define NR_syscalls 329
+#define NR_syscalls 331
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 330 */
#endif
.endm
-.section ".text.head","ax"
+__HEAD
ENTRY(_stext)
/*
* Version numbers of the bootinfo interface
#include <linux/linkage.h>
+#include <linux/init.h>
#include <asm/entry.h>
#include <asm/page.h>
.globl kernel_pg_dir
.equ kernel_pg_dir,kernel_pmd_table
- .section .text.head
+ __HEAD
ENTRY(_stext)
ENTRY(_start)
. = 0x1000;
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
. = 0xE002000;
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
config NO_DMA
bool
+ depends on !COLDFIRE
default y
config FPU
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# RAM/ROM/Flash chip drivers
#
-CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=115200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
# Security options
#
# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:32:41 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:17:30 2009
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_NO_IOPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+CONFIG_M5272=y
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+# CONFIG_UC5272 is not set
+CONFIG_M5272C3=y
+# CONFIG_COBRA5272 is not set
+# CONFIG_CANCam is not set
+# CONFIG_SCALES is not set
+# CONFIG_NETtel is not set
+# CONFIG_CPU16B is not set
+# CONFIG_MOD5272 is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 23:29:01 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC=y
CONFIG_FEC2=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_ARN5307 is not set
CONFIG_M5307C3=y
-# CONFIG_eLIA is not set
# CONFIG_SECUREEDGEMP3 is not set
# CONFIG_CLEOPATRA is not set
# CONFIG_NETtel is not set
CONFIG_FREESCALE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_HZ=100
#
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Wed May 7 10:25:16 2008
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 09:21:40 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* offsets into the irq_cpustat_t struct */
DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
#endif
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* signal defines */
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(SEGV_MAPERR, SEGV_MAPERR);
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/string.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <asm/cacheflush.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
free_pages((unsigned long)vaddr, get_order(size));
}
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
{
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ flush_dcache_range(handle, size);
+ break;
+ case DMA_FROM_DEVICE:
+ /* Should be clear already */
+ break;
+ default:
+ if (printk_ratelimit())
+ printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
+ break;
+ }
+}
+
+EXPORT_SYMBOL(dma_sync_single_for_device);
+dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = virt_to_phys(addr);
+ flush_dcache_range(handle, size);
+ return handle;
}
+EXPORT_SYMBOL(dma_map_single);
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = page_to_phys(page) + offset;
+ dma_sync_single_for_device(dev, handle, size, dir);
+ return handle;
+}
+EXPORT_SYMBOL(dma_map_page);
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 330 */
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
. = ALIGN(4);
_sdata = . ;
DATA_DATA
+ . = ALIGN(32);
+ *(.data.cacheline_aligned)
. = ALIGN(8192) ;
*(.data.init_task)
_edata = . ;
m527x_fec_irq_init(0);
/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+ v = readb(MCF_IPSBAR + 0x100047);
+ writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
par = readw(MCF_IPSBAR + 0x100082);
writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+#endif
#ifdef CONFIG_FEC2
m527x_fec_irq_init(1);
endif
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# The various CONFIG_XILINX cpu features options are integers 0/1/2...
# rather than bools y/n
-CFLAGS += $(CPUFLAGS-1)
-CFLAGS += $(CPUFLAGS-2)
# r31 holds current when in kernel mode
-CFLAGS += -ffixed-r31
+CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
-LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/ $(LIBGCC)
#define __disable_dcache() _disable_dcache()
#define __invalidate_dcache(addr) _invalidate_dcache(addr)
-/* FIXME - I don't think this is right */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
-#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE)
-#endif
-
#endif /* _ASM_MICROBLAZE_CACHE_H */
DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
-DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */
# endif /* __ASSEMBLY__ */
+/* noMMU hasn't any space for args */
+# define STATE_SAVE_ARG_SPACE (0)
+
#endif /* _ASM_MICROBLAZE_ENTRY_H */
asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
int fsr, int addr);
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
#if defined(CONFIG_XMON)
extern void xmon(struct pt_regs *regs);
extern int xmon_bpt(struct pt_regs *regs);
{},
};
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
#include <asm/setup.h>
#include <asm/registers.h>
#include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/current.h>
# ifndef __ASSEMBLY__
/* from kernel/cpu/mb.c */
# endif /* __ASSEMBLY__ */
+#define task_pt_regs(tsk) \
+ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
/*
* User space process size: memory size
*
struct thread_struct { };
# define INIT_THREAD { }
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs *regs,
- unsigned long pc,
- unsigned long usp)
-{
- regs->pc = pc;
- regs->r1 = usp;
- regs->kernel_mode = 0;
-}
-
/* Free all resources held by a thread. */
static inline void release_thread(struct task_struct *dead_task)
{
*/
extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-# define task_pt_regs(tsk) \
- (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
-
# define KSTK_EIP(tsk) (0)
# define KSTK_ESP(tsk) (0)
microblaze_reg_t ear;
microblaze_reg_t esr;
microblaze_reg_t fsr;
- int kernel_mode;
+ int pt_mode;
};
-#define kernel_mode(regs) ((regs)->kernel_mode)
+#define kernel_mode(regs) ((regs)->pt_mode)
#define user_mode(regs) (!kernel_mode(regs))
#define instruction_pointer(regs) ((regs)->pc)
#define __NR_sendmsg 360 /* new */
#define __NR_recvmsg 361 /* new */
#define __NR_accept04 362 /* new */
+#define __NR_preadv 363 /* new */
+#define __NR_pwritev 364 /* new */
-#define __NR_syscalls 363
+#define __NR_syscalls 365
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
DEFINE(PT_R29, offsetof(struct pt_regs, r29));
DEFINE(PT_R30, offsetof(struct pt_regs, r30));
DEFINE(PT_R31, offsetof(struct pt_regs, r31));
- DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode));
+ DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
BLANK();
/* Magic offsets for PTRACE PEEK/POKE etc */
void _disable_dcache(void)
{
- if (cpuinfo.use_dcache) {
#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
__asm__ __volatile__ (" \
msrclr r0, %0; \
: "i" (MSR_DCE) \
: "memory", "r12");
#endif
- }
}
void _invalidate_dcache(unsigned int addr)
{
- if (cpuinfo.use_dcache)
__asm__ __volatile__ (" \
wdc %0, r0" \
: \
int temp; /* for saving temp value */
get_pvr(&pvr);
+ CI(ver_code, VERSION);
+ if (!ci->ver_code) {
+ printk(KERN_ERR "ERROR: MB has broken PVR regs "
+ "-> use DTS setting\n");
+ return;
+ }
+
temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\
PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
if (ci->use_instr != temp)
CI(mmu, USE_MMU);
- CI(ver_code, VERSION);
-
CI(use_icache, USE_ICACHE);
CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
CI(icache_write, ICACHE_ALLOW_WR);
__func__);
set_cpuinfo_static(&cpuinfo, cpu);
break;
-/* FIXME I found weird behavior with MB 7.00.a/b
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
* please do not use FULL PVR with MMU */
case 1:
printk(KERN_INFO "%s: Using full CPU PVR support\n",
cpuinfo.hw_debug ? "yes" : "no");
count += seq_printf(m,
- "PVR-USR1:\t%x\n"
- "PVR-USR2:\t%x\n",
+ "PVR-USR1:\t%02x\n"
+ "PVR-USR2:\t%08x\n",
cpuinfo.pvr_user1,
cpuinfo.pvr_user2);
unsigned retries = 10000;
/* read status bit - 0x8 offset */
- while (retries-- && (in_be32(base_addr + 8) & (1 << 3)))
+ while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
;
/* Only attempt the iowrite if we didn't timeout */
void show_regs(struct pt_regs *regs)
{
- printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode);
+ printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode);
printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
regs->r1, regs->r2, regs->r3, regs->r4);
printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
regs->r29, regs->r30, regs->r31, regs->pc);
printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
regs->msr, regs->ear, regs->esr, regs->fsr);
- while (1)
- ;
}
void (*pm_idle)(void);
int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
{
struct pt_regs regs;
- int ret;
memset(®s, 0, sizeof(regs));
/* store them in non-volatile registers */
regs.r6 = (unsigned long)arg;
local_save_flags(regs.msr);
regs.pc = (unsigned long)kernel_thread_helper;
- regs.kernel_mode = 1;
+ regs.pt_mode = 1;
- ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
®s, 0, NULL, NULL);
-
- return ret;
}
unsigned long get_wchan(struct task_struct *p)
/* TBD (used by procfs) */
return 0;
}
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+ set_fs(USER_DS);
+ regs->pc = pc;
+ regs->r1 = usp;
+ regs->pt_mode = 0;
+}
asmlinkage int sys_sigreturn(struct pt_regs *regs)
{
- struct sigframe *frame = (struct sigframe *)regs->r1;
+ struct sigframe *frame =
+ (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
sigset_t set;
int rval;
asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
{
- struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1;
+ struct rt_sigframe *frame =
+ (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
sigset_t set;
stack_t st;
int rval;
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->r1 = (unsigned long) frame;
+ regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
/* Signal handler args: */
regs->r5 = signal; /* Arg 0: signum */
regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->r1 = (unsigned long) frame;
+ regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
/* Signal handler args: */
regs->r5 = signal; /* arg 0: signum */
regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
.long sys_sendmsg /* 360 */
.long sys_recvmsg
.long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_ni_syscall
clockevents_register_device(&clockevent_microblaze_timer);
}
-static cycle_t microblaze_read(void)
+static cycle_t microblaze_read(struct clocksource *cs)
{
/* reading actual value of timer 1 */
return (cycle_t) (in_be32(TIMER_BASE + TCR1));
static int __init kstack_setup(char *s)
{
- kstack_depth_to_print = strict_strtoul(s, 0, 0);
+ kstack_depth_to_print = strict_strtoul(s, 0, NULL);
return 1;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Tue Feb 19 18:52:24 2008
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 11:13:22 2009
#
CONFIG_MN10300=y
CONFIG_AM33=y
CONFIG_GENERIC_BUG=y
CONFIG_QUICKLIST=y
CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_SUPPORTS_AOUT is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HZ=1000
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
#
# Matsushita MN10300 system setup
CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
CONFIG_MN10300_CURRENT_IN_E2=y
CONFIG_MN10300_USING_JTAG=y
CONFIG_MN10300_RTC=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# Power management options
# Executable formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
#
# SCSI device support
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Profiling support
-#
+CONFIG_NLATTR=y
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <linux/serial_reg.h>
#include <asm/param.h>
#include <unit/serial.h>
- .section .text.head,"ax"
+ __HEAD
###############################################################################
#
_stext = .;
_text = .; /* Text and read-only data */
.text : {
- *(
- .text.head
- .text
- )
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
default y if PMAC_APM_EMU
bool
+config DTC
+ bool
+ default y
+
config DEFAULT_UIMAGE
bool
help
#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
-void ibm4xx_denali_fixup_memsize(void)
+/*
+ * Some U-Boot versions set the number of chipselects to two
+ * for Sequoia/Rainier boards while they only have one chipselect
+ * hardwired. Hardcode the number of chipselects to one
+ * for sequioa/rainer board models or read the actual value
+ * from the memory controller register DDR0_10 otherwise.
+ */
+static inline u32 ibm4xx_denali_get_cs(void)
{
- u32 val, max_cs, max_col, max_row;
- u32 cs, col, row, bank, dpath;
- unsigned long memsize;
+ void *devp;
+ char model[64];
+ u32 val, cs;
- val = SDRAM0_READ(DDR0_02);
- if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
- fatal("DDR controller is not initialized\n");
+ devp = finddevice("/");
+ if (!devp)
+ goto read_cs;
- /* get maximum cs col and row values */
- max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
- max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
- max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+ if (getprop(devp, "model", model, sizeof(model)) <= 0)
+ goto read_cs;
+ model[sizeof(model)-1] = 0;
+
+ if (!strcmp(model, "amcc,sequoia") ||
+ !strcmp(model, "amcc,rainier"))
+ return 1;
+
+read_cs:
/* get CS value */
val = SDRAM0_READ(DDR0_10);
cs++;
val = val >> 1;
}
+ return cs;
+}
+
+void ibm4xx_denali_fixup_memsize(void)
+{
+ u32 val, max_cs, max_col, max_row;
+ u32 cs, col, row, bank, dpath;
+ unsigned long memsize;
+
+ val = SDRAM0_READ(DDR0_02);
+ if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
+ fatal("DDR controller is not initialized\n");
+ /* get maximum cs col and row values */
+ max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
+ max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
+ max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+
+ cs = ibm4xx_denali_get_cs();
if (!cs)
fatal("No memory installed\n");
if (cs > max_cs)
val = SDRAM0_READ(DDR0_14);
if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
- dpath = 8; /* 64 bits */
- else
dpath = 4; /* 32 bits */
+ else
+ dpath = 8; /* 64 bits */
/* get address pins (rows) */
val = SDRAM0_READ(DDR0_42);
BOOTCFLAGS += -fno-stack-protector
endif
-BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
+BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
DTS_FLAGS ?= -p 1024
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
-src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ $(addprefix $(obj)/,$(libfdtheader))
+
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
- $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
+ $(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
+quiet_cmd_copy_libfdt = COPY $@
+ cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,copy_libfdt)
+
$(obj)/empty.c:
@touch $@
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+ $(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+ $(call if_changed_dep,bootcc)
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,bootcc)
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote addRamDisk hack-coff mktree dtc
+hostprogs-y := addnote addRamDisk hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
dtstree := $(srctree)/$(src)/dts
wrapper :=$(srctree)/$(src)/wrapper
-wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
+wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper) FORCE
-#############
-# Bits for building dtc
-# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
-
-dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
-dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
-dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
-
-# prerequisites on generated files needs to be explicit
-$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
-$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
-
-HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
-
-targets += dtc-src/dtc-parser.tab.c
-targets += dtc-src/dtc-lexer.lex.c
-
-clean-files += dtc-src/dtc-parser.tab.h
-
-ifdef DTC_GENPARSER
-BISON = bison
-FLEX = flex
-
-quiet_cmd_bison = BISON $@
- cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
-quiet_cmd_flex = FLEX $@
- cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
-
-$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
- $(call if_changed,bison)
-
-$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
-
-$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
- $(call if_changed,flex)
-endif
-
#############
# Bits for building various flavours of zImage
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
# Rule to build device tree blobs
-$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
- $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+DTC = $(objtree)/scripts/dtc/dtc
+
+$(obj)/%.dtb: $(dtstree)/%.dts
+ $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
+++ /dev/null
-# Makefile.dtc
-#
-# This is not a complete Makefile of itself. Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
- checks.c
-DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
-DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-#ifdef TRACE_CHECKS
-#define TRACE(c, ...) \
- do { \
- fprintf(stderr, "=== %s: ", (c)->name); \
- fprintf(stderr, __VA_ARGS__); \
- fprintf(stderr, "\n"); \
- } while (0)
-#else
-#define TRACE(c, fmt, ...) do { } while (0)
-#endif
-
-enum checklevel {
- IGNORE = 0,
- WARN = 1,
- ERROR = 2,
-};
-
-enum checkstatus {
- UNCHECKED = 0,
- PREREQ,
- PASSED,
- FAILED,
-};
-
-struct check;
-
-typedef void (*tree_check_fn)(struct check *c, struct node *dt);
-typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node);
-typedef void (*prop_check_fn)(struct check *c, struct node *dt,
- struct node *node, struct property *prop);
-
-struct check {
- const char *name;
- tree_check_fn tree_fn;
- node_check_fn node_fn;
- prop_check_fn prop_fn;
- void *data;
- enum checklevel level;
- enum checkstatus status;
- int inprogress;
- int num_prereqs;
- struct check **prereq;
-};
-
-#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \
- static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \
- static struct check nm = { \
- .name = #nm, \
- .tree_fn = (tfn), \
- .node_fn = (nfn), \
- .prop_fn = (pfn), \
- .data = (d), \
- .level = (lvl), \
- .status = UNCHECKED, \
- .num_prereqs = ARRAY_SIZE(nm##_prereqs), \
- .prereq = nm##_prereqs, \
- };
-
-#define TREE_CHECK(nm, d, lvl, ...) \
- CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__)
-#define NODE_CHECK(nm, d, lvl, ...) \
- CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__)
-#define PROP_CHECK(nm, d, lvl, ...) \
- CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__)
-#define BATCH_CHECK(nm, lvl, ...) \
- CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__)
-
-#ifdef __GNUC__
-static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
-#endif
-static inline void check_msg(struct check *c, const char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
-
- if ((c->level < WARN) || (c->level <= quiet))
- return; /* Suppress message */
-
- fprintf(stderr, "%s (%s): ",
- (c->level == ERROR) ? "ERROR" : "Warning", c->name);
- vfprintf(stderr, fmt, ap);
- fprintf(stderr, "\n");
-}
-
-#define FAIL(c, ...) \
- do { \
- TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
- (c)->status = FAILED; \
- check_msg((c), __VA_ARGS__); \
- } while (0)
-
-static void check_nodes_props(struct check *c, struct node *dt, struct node *node)
-{
- struct node *child;
- struct property *prop;
-
- TRACE(c, "%s", node->fullpath);
- if (c->node_fn)
- c->node_fn(c, dt, node);
-
- if (c->prop_fn)
- for_each_property(node, prop) {
- TRACE(c, "%s\t'%s'", node->fullpath, prop->name);
- c->prop_fn(c, dt, node, prop);
- }
-
- for_each_child(node, child)
- check_nodes_props(c, dt, child);
-}
-
-static int run_check(struct check *c, struct node *dt)
-{
- int error = 0;
- int i;
-
- assert(!c->inprogress);
-
- if (c->status != UNCHECKED)
- goto out;
-
- c->inprogress = 1;
-
- for (i = 0; i < c->num_prereqs; i++) {
- struct check *prq = c->prereq[i];
- error |= run_check(prq, dt);
- if (prq->status != PASSED) {
- c->status = PREREQ;
- check_msg(c, "Failed prerequisite '%s'",
- c->prereq[i]->name);
- }
- }
-
- if (c->status != UNCHECKED)
- goto out;
-
- if (c->node_fn || c->prop_fn)
- check_nodes_props(c, dt, dt);
-
- if (c->tree_fn)
- c->tree_fn(c, dt);
- if (c->status == UNCHECKED)
- c->status = PASSED;
-
- TRACE(c, "\tCompleted, status %d", c->status);
-
-out:
- c->inprogress = 0;
- if ((c->status != PASSED) && (c->level == ERROR))
- error = 1;
- return error;
-}
-
-/*
- * Utility check functions
- */
-
-static void check_is_string(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- char *propname = c->data;
-
- prop = get_property(node, propname);
- if (!prop)
- return; /* Not present, assumed ok */
-
- if (!data_is_one_string(prop->val))
- FAIL(c, "\"%s\" property in %s is not a string",
- propname, node->fullpath);
-}
-#define CHECK_IS_STRING(nm, propname, lvl) \
- CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl))
-
-static void check_is_cell(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- char *propname = c->data;
-
- prop = get_property(node, propname);
- if (!prop)
- return; /* Not present, assumed ok */
-
- if (prop->val.len != sizeof(cell_t))
- FAIL(c, "\"%s\" property in %s is not a single cell",
- propname, node->fullpath);
-}
-#define CHECK_IS_CELL(nm, propname, lvl) \
- CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl))
-
-/*
- * Structural check functions
- */
-
-static void check_duplicate_node_names(struct check *c, struct node *dt,
- struct node *node)
-{
- struct node *child, *child2;
-
- for_each_child(node, child)
- for (child2 = child->next_sibling;
- child2;
- child2 = child2->next_sibling)
- if (streq(child->name, child2->name))
- FAIL(c, "Duplicate node name %s",
- child->fullpath);
-}
-NODE_CHECK(duplicate_node_names, NULL, ERROR);
-
-static void check_duplicate_property_names(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop, *prop2;
-
- for_each_property(node, prop)
- for (prop2 = prop->next; prop2; prop2 = prop2->next)
- if (streq(prop->name, prop2->name))
- FAIL(c, "Duplicate property name %s in %s",
- prop->name, node->fullpath);
-}
-NODE_CHECK(duplicate_property_names, NULL, ERROR);
-
-#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
-#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-#define DIGITS "0123456789"
-#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
-
-static void check_node_name_chars(struct check *c, struct node *dt,
- struct node *node)
-{
- int n = strspn(node->name, c->data);
-
- if (n < strlen(node->name))
- FAIL(c, "Bad character '%c' in node %s",
- node->name[n], node->fullpath);
-}
-NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
-
-static void check_node_name_format(struct check *c, struct node *dt,
- struct node *node)
-{
- if (strchr(get_unitname(node), '@'))
- FAIL(c, "Node %s has multiple '@' characters in name",
- node->fullpath);
-}
-NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
-
-static void check_property_name_chars(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- int n = strspn(prop->name, c->data);
-
- if (n < strlen(prop->name))
- FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
- prop->name[n], prop->name, node->fullpath);
-}
-PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
-
-static void check_explicit_phandles(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- struct node *other;
- cell_t phandle;
-
- prop = get_property(node, "linux,phandle");
- if (! prop)
- return; /* No phandle, that's fine */
-
- if (prop->val.len != sizeof(cell_t)) {
- FAIL(c, "%s has bad length (%d) linux,phandle property",
- node->fullpath, prop->val.len);
- return;
- }
-
- phandle = propval_cell(prop);
- if ((phandle == 0) || (phandle == -1)) {
- FAIL(c, "%s has invalid linux,phandle value 0x%x",
- node->fullpath, phandle);
- return;
- }
-
- other = get_node_by_phandle(root, phandle);
- if (other) {
- FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
- node->fullpath, phandle, other->fullpath);
- return;
- }
-
- node->phandle = phandle;
-}
-NODE_CHECK(explicit_phandles, NULL, ERROR);
-
-static void check_name_properties(struct check *c, struct node *root,
- struct node *node)
-{
- struct property **pp, *prop = NULL;
-
- for (pp = &node->proplist; *pp; pp = &((*pp)->next))
- if (streq((*pp)->name, "name")) {
- prop = *pp;
- break;
- }
-
- if (!prop)
- return; /* No name property, that's fine */
-
- if ((prop->val.len != node->basenamelen+1)
- || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
- FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
- " of base node name)", node->fullpath, prop->val.val);
- } else {
- /* The name property is correct, and therefore redundant.
- * Delete it */
- *pp = prop->next;
- free(prop->name);
- data_free(prop->val);
- free(prop);
- }
-}
-CHECK_IS_STRING(name_is_string, "name", ERROR);
-NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
-
-/*
- * Reference fixup functions
- */
-
-static void fixup_phandle_references(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- cell_t phandle;
-
- for_each_marker_of_type(m, REF_PHANDLE) {
- assert(m->offset + sizeof(cell_t) <= prop->val.len);
-
- refnode = get_node_by_ref(dt, m->ref);
- if (! refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
-
- phandle = get_node_phandle(dt, refnode);
- *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
- }
-}
-CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
- &duplicate_node_names, &explicit_phandles);
-
-static void fixup_path_references(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- char *path;
-
- for_each_marker_of_type(m, REF_PATH) {
- assert(m->offset <= prop->val.len);
-
- refnode = get_node_by_ref(dt, m->ref);
- if (!refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
-
- path = refnode->fullpath;
- prop->val = data_insert_at_marker(prop->val, m, path,
- strlen(path) + 1);
- }
-}
-CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR,
- &duplicate_node_names);
-
-/*
- * Semantic checks
- */
-CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN);
-CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN);
-CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN);
-
-CHECK_IS_STRING(device_type_is_string, "device_type", WARN);
-CHECK_IS_STRING(model_is_string, "model", WARN);
-CHECK_IS_STRING(status_is_string, "status", WARN);
-
-static void fixup_addr_size_cells(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
-
- node->addr_cells = -1;
- node->size_cells = -1;
-
- prop = get_property(node, "#address-cells");
- if (prop)
- node->addr_cells = propval_cell(prop);
-
- prop = get_property(node, "#size-cells");
- if (prop)
- node->size_cells = propval_cell(prop);
-}
-CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN,
- &address_cells_is_cell, &size_cells_is_cell);
-
-#define node_addr_cells(n) \
- (((n)->addr_cells == -1) ? 2 : (n)->addr_cells)
-#define node_size_cells(n) \
- (((n)->size_cells == -1) ? 1 : (n)->size_cells)
-
-static void check_reg_format(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
- int addr_cells, size_cells, entrylen;
-
- prop = get_property(node, "reg");
- if (!prop)
- return; /* No "reg", that's fine */
-
- if (!node->parent) {
- FAIL(c, "Root node has a \"reg\" property");
- return;
- }
-
- if (prop->val.len == 0)
- FAIL(c, "\"reg\" property in %s is empty", node->fullpath);
-
- addr_cells = node_addr_cells(node->parent);
- size_cells = node_size_cells(node->parent);
- entrylen = (addr_cells + size_cells) * sizeof(cell_t);
-
- if ((prop->val.len % entrylen) != 0)
- FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) "
- "(#address-cells == %d, #size-cells == %d)",
- node->fullpath, prop->val.len, addr_cells, size_cells);
-}
-NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells);
-
-static void check_ranges_format(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
- int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
-
- prop = get_property(node, "ranges");
- if (!prop)
- return;
-
- if (!node->parent) {
- FAIL(c, "Root node has a \"ranges\" property");
- return;
- }
-
- p_addr_cells = node_addr_cells(node->parent);
- p_size_cells = node_size_cells(node->parent);
- c_addr_cells = node_addr_cells(node);
- c_size_cells = node_size_cells(node);
- entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t);
-
- if (prop->val.len == 0) {
- if (p_addr_cells != c_addr_cells)
- FAIL(c, "%s has empty \"ranges\" property but its "
- "#address-cells (%d) differs from %s (%d)",
- node->fullpath, c_addr_cells, node->parent->fullpath,
- p_addr_cells);
- if (p_size_cells != c_size_cells)
- FAIL(c, "%s has empty \"ranges\" property but its "
- "#size-cells (%d) differs from %s (%d)",
- node->fullpath, c_size_cells, node->parent->fullpath,
- p_size_cells);
- } else if ((prop->val.len % entrylen) != 0) {
- FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) "
- "(parent #address-cells == %d, child #address-cells == %d, "
- "#size-cells == %d)", node->fullpath, prop->val.len,
- p_addr_cells, c_addr_cells, c_size_cells);
- }
-}
-NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells);
-
-/*
- * Style checks
- */
-static void check_avoid_default_addr_size(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *reg, *ranges;
-
- if (!node->parent)
- return; /* Ignore root node */
-
- reg = get_property(node, "reg");
- ranges = get_property(node, "ranges");
-
- if (!reg && !ranges)
- return;
-
- if ((node->parent->addr_cells == -1))
- FAIL(c, "Relying on default #address-cells value for %s",
- node->fullpath);
-
- if ((node->parent->size_cells == -1))
- FAIL(c, "Relying on default #size-cells value for %s",
- node->fullpath);
-}
-NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells);
-
-static void check_obsolete_chosen_interrupt_controller(struct check *c,
- struct node *dt)
-{
- struct node *chosen;
- struct property *prop;
-
- chosen = get_node_by_path(dt, "/chosen");
- if (!chosen)
- return;
-
- prop = get_property(chosen, "interrupt-controller");
- if (prop)
- FAIL(c, "/chosen has obsolete \"interrupt-controller\" "
- "property");
-}
-TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
-
-static struct check *check_table[] = {
- &duplicate_node_names, &duplicate_property_names,
- &node_name_chars, &node_name_format, &property_name_chars,
- &name_is_string, &name_properties,
- &explicit_phandles,
- &phandle_references, &path_references,
-
- &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell,
- &device_type_is_string, &model_is_string, &status_is_string,
-
- &addr_size_cells, ®_format, &ranges_format,
-
- &avoid_default_addr_size,
- &obsolete_chosen_interrupt_controller,
-};
-
-void process_checks(int force, struct boot_info *bi)
-{
- struct node *dt = bi->dt;
- int i;
- int error = 0;
-
- for (i = 0; i < ARRAY_SIZE(check_table); i++) {
- struct check *c = check_table[i];
-
- if (c->level != IGNORE)
- error = error || run_check(c, dt);
- }
-
- if (error) {
- if (!force) {
- fprintf(stderr, "ERROR: Input tree has errors, aborting "
- "(use -f to force output)\n");
- exit(2);
- } else if (quiet < 3) {
- fprintf(stderr, "Warning: Input tree has errors, "
- "output forced\n");
- }
- }
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-void data_free(struct data d)
-{
- struct marker *m, *nm;
-
- m = d.markers;
- while (m) {
- nm = m->next;
- free(m->ref);
- free(m);
- m = nm;
- }
-
- if (d.val)
- free(d.val);
-}
-
-struct data data_grow_for(struct data d, int xlen)
-{
- struct data nd;
- int newsize;
-
- if (xlen == 0)
- return d;
-
- nd = d;
-
- newsize = xlen;
-
- while ((d.len + xlen) > newsize)
- newsize *= 2;
-
- nd.val = xrealloc(d.val, newsize);
-
- return nd;
-}
-
-struct data data_copy_mem(const char *mem, int len)
-{
- struct data d;
-
- d = data_grow_for(empty_data, len);
-
- d.len = len;
- memcpy(d.val, mem, len);
-
- return d;
-}
-
-static char get_oct_char(const char *s, int *i)
-{
- char x[4];
- char *endx;
- long val;
-
- x[3] = '\0';
- strncpy(x, s + *i, 3);
-
- val = strtol(x, &endx, 8);
-
- assert(endx > x);
-
- (*i) += endx - x;
- return val;
-}
-
-static char get_hex_char(const char *s, int *i)
-{
- char x[3];
- char *endx;
- long val;
-
- x[2] = '\0';
- strncpy(x, s + *i, 2);
-
- val = strtol(x, &endx, 16);
- if (!(endx > x))
- die("\\x used with no following hex digits\n");
-
- (*i) += endx - x;
- return val;
-}
-
-struct data data_copy_escape_string(const char *s, int len)
-{
- int i = 0;
- struct data d;
- char *q;
-
- d = data_grow_for(empty_data, strlen(s)+1);
-
- q = d.val;
- while (i < len) {
- char c = s[i++];
-
- if (c != '\\') {
- q[d.len++] = c;
- continue;
- }
-
- c = s[i++];
- assert(c);
- switch (c) {
- case 'a':
- q[d.len++] = '\a';
- break;
- case 'b':
- q[d.len++] = '\b';
- break;
- case 't':
- q[d.len++] = '\t';
- break;
- case 'n':
- q[d.len++] = '\n';
- break;
- case 'v':
- q[d.len++] = '\v';
- break;
- case 'f':
- q[d.len++] = '\f';
- break;
- case 'r':
- q[d.len++] = '\r';
- break;
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- i--; /* need to re-read the first digit as
- * part of the octal value */
- q[d.len++] = get_oct_char(s, &i);
- break;
- case 'x':
- q[d.len++] = get_hex_char(s, &i);
- break;
- default:
- q[d.len++] = c;
- }
- }
-
- q[d.len++] = '\0';
- return d;
-}
-
-struct data data_copy_file(FILE *f, size_t maxlen)
-{
- struct data d = empty_data;
-
- while (!feof(f) && (d.len < maxlen)) {
- size_t chunksize, ret;
-
- if (maxlen == -1)
- chunksize = 4096;
- else
- chunksize = maxlen - d.len;
-
- d = data_grow_for(d, chunksize);
- ret = fread(d.val + d.len, 1, chunksize, f);
-
- if (ferror(f))
- die("Error reading file into data: %s", strerror(errno));
-
- if (d.len + ret < d.len)
- die("Overflow reading file into data\n");
-
- d.len += ret;
- }
-
- return d;
-}
-
-struct data data_append_data(struct data d, const void *p, int len)
-{
- d = data_grow_for(d, len);
- memcpy(d.val + d.len, p, len);
- d.len += len;
- return d;
-}
-
-struct data data_insert_at_marker(struct data d, struct marker *m,
- const void *p, int len)
-{
- d = data_grow_for(d, len);
- memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset);
- memcpy(d.val + m->offset, p, len);
- d.len += len;
-
- /* Adjust all markers after the one we're inserting at */
- m = m->next;
- for_each_marker(m)
- m->offset += len;
- return d;
-}
-
-struct data data_append_markers(struct data d, struct marker *m)
-{
- struct marker **mp = &d.markers;
-
- /* Find the end of the markerlist */
- while (*mp)
- mp = &((*mp)->next);
- *mp = m;
- return d;
-}
-
-struct data data_merge(struct data d1, struct data d2)
-{
- struct data d;
- struct marker *m2 = d2.markers;
-
- d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2);
-
- /* Adjust for the length of d1 */
- for_each_marker(m2)
- m2->offset += d1.len;
-
- d2.markers = NULL; /* So data_free() doesn't clobber them */
- data_free(d2);
-
- return d;
-}
-
-struct data data_append_cell(struct data d, cell_t word)
-{
- cell_t beword = cpu_to_fdt32(word);
-
- return data_append_data(d, &beword, sizeof(beword));
-}
-
-struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
-{
- struct fdt_reserve_entry bere;
-
- bere.address = cpu_to_fdt64(re->address);
- bere.size = cpu_to_fdt64(re->size);
-
- return data_append_data(d, &bere, sizeof(bere));
-}
-
-struct data data_append_addr(struct data d, uint64_t addr)
-{
- uint64_t beaddr = cpu_to_fdt64(addr);
-
- return data_append_data(d, &beaddr, sizeof(beaddr));
-}
-
-struct data data_append_byte(struct data d, uint8_t byte)
-{
- return data_append_data(d, &byte, 1);
-}
-
-struct data data_append_zeroes(struct data d, int len)
-{
- d = data_grow_for(d, len);
-
- memset(d.val + d.len, 0, len);
- d.len += len;
- return d;
-}
-
-struct data data_append_align(struct data d, int align)
-{
- int newlen = ALIGN(d.len, align);
- return data_append_zeroes(d, newlen - d.len);
-}
-
-struct data data_add_marker(struct data d, enum markertype type, char *ref)
-{
- struct marker *m;
-
- m = xmalloc(sizeof(*m));
- m->offset = d.len;
- m->type = type;
- m->ref = ref;
- m->next = NULL;
-
- return data_append_markers(d, m);
-}
-
-int data_is_one_string(struct data d)
-{
- int i;
- int len = d.len;
-
- if (len == 0)
- return 0;
-
- for (i = 0; i < len-1; i++)
- if (d.val[i] == '\0')
- return 0;
-
- if (d.val[len-1] != '\0')
- return 0;
-
- return 1;
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-%option noyywrap nounput yylineno
-
-%x INCLUDE
-%x BYTESTRING
-%x PROPNODENAME
-%s V1
-
-PROPNODECHAR [a-zA-Z0-9,._+*#?@-]
-PATHCHAR ({PROPNODECHAR}|[/])
-LABEL [a-zA-Z_][a-zA-Z0-9_]*
-STRING \"([^\\"]|\\.)*\"
-WS [[:space:]]
-COMMENT "/*"([^*]|\*+[^*/])*\*+"/"
-LINECOMMENT "//".*\n
-
-%{
-#include "dtc.h"
-#include "srcpos.h"
-#include "dtc-parser.tab.h"
-
-
-/*#define LEXDEBUG 1*/
-
-#ifdef LEXDEBUG
-#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
-#else
-#define DPRINT(fmt, ...) do { } while (0)
-#endif
-
-static int dts_version; /* = 0 */
-
-#define BEGIN_DEFAULT() if (dts_version == 0) { \
- DPRINT("<INITIAL>\n"); \
- BEGIN(INITIAL); \
- } else { \
- DPRINT("<V1>\n"); \
- BEGIN(V1); \
- }
-
-static void push_input_file(const char *filename);
-static int pop_input_file(void);
-%}
-
-%%
-<*>"/include/"{WS}*{STRING} {
- char *name = strchr(yytext, '\"') + 1;
- yytext[yyleng-1] = '\0';
- push_input_file(name);
- }
-
-<*><<EOF>> {
- if (!pop_input_file()) {
- yyterminate();
- }
- }
-
-<*>{STRING} {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("String: %s\n", yytext);
- yylval.data = data_copy_escape_string(yytext+1,
- yyleng-2);
- yylloc.first_line = yylineno;
- return DT_STRING;
- }
-
-<*>"/dts-v1/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /dts-v1/\n");
- dts_version = 1;
- BEGIN_DEFAULT();
- return DT_V1;
- }
-
-<*>"/memreserve/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /memreserve/\n");
- BEGIN_DEFAULT();
- return DT_MEMRESERVE;
- }
-
-<*>{LABEL}: {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Label: %s\n", yytext);
- yylval.labelref = strdup(yytext);
- yylval.labelref[yyleng-1] = '\0';
- return DT_LABEL;
- }
-
-<INITIAL>[bodh]# {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- if (*yytext == 'b')
- yylval.cbase = 2;
- else if (*yytext == 'o')
- yylval.cbase = 8;
- else if (*yytext == 'd')
- yylval.cbase = 10;
- else
- yylval.cbase = 16;
- DPRINT("Base: %d\n", yylval.cbase);
- return DT_BASE;
- }
-
-<INITIAL>[0-9a-fA-F]+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LEGACYLITERAL;
- }
-
-<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LITERAL;
- }
-
-\&{LABEL} { /* label reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
-
-"&{/"{PATHCHAR}+\} { /* new-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yytext[yyleng-1] = '\0';
- DPRINT("Ref: %s\n", yytext+2);
- yylval.labelref = strdup(yytext+2);
- return DT_REF;
- }
-
-<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
-
-<BYTESTRING>[0-9a-fA-F]{2} {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.byte = strtol(yytext, NULL, 16);
- DPRINT("Byte: %02x\n", (int)yylval.byte);
- return DT_BYTE;
- }
-
-<BYTESTRING>"]" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("/BYTESTRING\n");
- BEGIN_DEFAULT();
- return ']';
- }
-
-<PROPNODENAME>{PROPNODECHAR}+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("PropNodeName: %s\n", yytext);
- yylval.propnodename = strdup(yytext);
- BEGIN_DEFAULT();
- return DT_PROPNODENAME;
- }
-
-"/incbin/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Binary Include\n");
- return DT_INCBIN;
- }
-
-<*>{WS}+ /* eat whitespace */
-<*>{COMMENT}+ /* eat C-style comments */
-<*>{LINECOMMENT}+ /* eat C++-style comments */
-
-<*>. {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Char: %c (\\x%02x)\n", yytext[0],
- (unsigned)yytext[0]);
- if (yytext[0] == '[') {
- DPRINT("<BYTESTRING>\n");
- BEGIN(BYTESTRING);
- }
- if ((yytext[0] == '{')
- || (yytext[0] == ';')) {
- DPRINT("<PROPNODENAME>\n");
- BEGIN(PROPNODENAME);
- }
- return yytext[0];
- }
-
-%%
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
- struct dtc_file *file;
- YY_BUFFER_STATE yy_prev_buf;
- int yy_prev_lineno;
- struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH (100)
-
-static int incl_depth = 0;
-
-
-static void push_input_file(const char *filename)
-{
- struct incl_file *incl_file;
- struct dtc_file *newfile;
- struct search_path search, *searchptr = NULL;
-
- assert(filename);
-
- if (incl_depth++ >= MAX_INCLUDE_DEPTH)
- die("Includes nested too deeply");
-
- if (srcpos_file) {
- search.dir = srcpos_file->dir;
- search.next = NULL;
- search.prev = NULL;
- searchptr = &search;
- }
-
- newfile = dtc_open_file(filename, searchptr);
-
- incl_file = xmalloc(sizeof(struct incl_file));
-
- /*
- * Save current context.
- */
- incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
- incl_file->yy_prev_lineno = yylineno;
- incl_file->file = srcpos_file;
- incl_file->prev = incl_file_stack;
-
- incl_file_stack = incl_file;
-
- /*
- * Establish new context.
- */
- srcpos_file = newfile;
- yylineno = 1;
- yyin = newfile->file;
- yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
-}
-
-
-static int pop_input_file(void)
-{
- struct incl_file *incl_file;
-
- if (incl_file_stack == 0)
- return 0;
-
- dtc_close_file(srcpos_file);
-
- /*
- * Pop.
- */
- --incl_depth;
- incl_file = incl_file_stack;
- incl_file_stack = incl_file->prev;
-
- /*
- * Recover old context.
- */
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(incl_file->yy_prev_buf);
- yylineno = incl_file->yy_prev_lineno;
- srcpos_file = incl_file->file;
- yyin = incl_file->file ? incl_file->file->file : NULL;
-
- /*
- * Free old state.
- */
- free(incl_file);
-
- return 1;
-}
+++ /dev/null
-#line 2 "dtc-lexer.lex.c"
-
-#line 4 "dtc-lexer.lex.c"
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 34
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart(yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#define YY_BUF_SIZE 16384
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-extern int yyleng;
-
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
- * access to the local variable yy_act. Since yyless() is a macro, it would break
- * existing scanners that call yyless() from OUTSIDE yylex.
- * One obvious solution it to make yy_act a global. I tried that, and saw
- * a 5% performance hit in a non-yylineno scanner, because yy_act is
- * normally declared as a register variable-- so it is not worth it.
- */
- #define YY_LESS_LINENO(n) \
- do { \
- int yyl;\
- for ( yyl = n; yyl < yyleng; ++yyl )\
- if ( yytext[yyl] == '\n' )\
- --yylineno;\
- }while(0)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up yytext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- * Given that the standard has decreed that size_t exists since 1989,
- * I guess we can afford to depend on it. Manoj.
- */
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via yyrestart()), so that the user can continue scanning by
- * just pointing yyin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart (FILE *input_file );
-void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
-void yy_delete_buffer (YY_BUFFER_STATE b );
-void yy_flush_buffer (YY_BUFFER_STATE b );
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
-void yypop_buffer_state (void );
-
-static void yyensure_buffer_stack (void );
-static void yy_load_buffer_state (void );
-static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
-
-void *yyalloc (yy_size_t );
-void *yyrealloc (void *,yy_size_t );
-void yyfree (void * );
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-#define yywrap(n) 1
-#define YY_SKIP_YYWRAP
-
-typedef unsigned char YY_CHAR;
-
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int yylineno;
-
-int yylineno = 1;
-
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- yyleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 20
-#define YY_END_OF_BUFFER 21
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_accept[104] =
- { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 21, 19, 16, 16, 19, 19, 19, 7, 7, 19,
- 7, 19, 19, 19, 19, 13, 14, 14, 19, 8,
- 8, 16, 0, 2, 0, 0, 9, 0, 0, 0,
- 0, 0, 0, 7, 7, 5, 0, 6, 0, 12,
- 12, 14, 14, 8, 0, 11, 9, 0, 0, 0,
- 0, 18, 0, 0, 0, 0, 8, 0, 17, 0,
- 0, 0, 0, 0, 10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 3, 15,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
-
- 0, 4, 0
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 2, 2, 2, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 2, 1, 4, 5, 1, 1, 6, 1, 1,
- 1, 7, 8, 8, 9, 8, 10, 11, 12, 13,
- 13, 13, 13, 13, 13, 13, 13, 14, 1, 1,
- 1, 1, 8, 8, 15, 15, 15, 15, 15, 15,
- 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
- 16, 16, 16, 16, 16, 16, 16, 17, 16, 16,
- 1, 18, 19, 1, 16, 1, 15, 20, 21, 22,
-
- 23, 15, 16, 24, 25, 16, 16, 26, 27, 28,
- 24, 16, 16, 29, 30, 31, 32, 33, 16, 17,
- 16, 16, 34, 1, 35, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst flex_int32_t yy_meta[36] =
- { 0,
- 1, 1, 1, 1, 2, 1, 2, 2, 2, 3,
- 4, 4, 4, 5, 6, 7, 7, 1, 1, 6,
- 6, 6, 6, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 8, 1
- } ;
-
-static yyconst flex_int16_t yy_base[117] =
- { 0,
- 0, 0, 30, 0, 44, 0, 67, 0, 97, 105,
- 302, 303, 35, 44, 40, 94, 112, 0, 129, 152,
- 296, 295, 159, 0, 176, 303, 0, 116, 95, 165,
- 49, 46, 102, 303, 296, 0, 0, 288, 290, 293,
- 264, 266, 270, 0, 0, 303, 0, 303, 264, 303,
- 0, 0, 195, 101, 0, 0, 0, 0, 284, 125,
- 277, 265, 225, 230, 216, 218, 0, 202, 224, 221,
- 217, 107, 196, 188, 303, 206, 179, 186, 178, 185,
- 183, 162, 161, 150, 169, 160, 145, 125, 303, 303,
- 137, 109, 190, 103, 203, 167, 108, 197, 303, 123,
-
- 29, 303, 303, 215, 221, 226, 229, 234, 240, 246,
- 250, 257, 265, 270, 275, 282
- } ;
-
-static yyconst flex_int16_t yy_def[117] =
- { 0,
- 103, 1, 1, 3, 3, 5, 103, 7, 3, 3,
- 103, 103, 103, 103, 104, 105, 103, 106, 103, 19,
- 19, 20, 103, 107, 20, 103, 108, 109, 105, 103,
- 103, 103, 104, 103, 104, 110, 111, 103, 112, 113,
- 103, 103, 103, 106, 19, 103, 20, 103, 103, 103,
- 20, 108, 109, 103, 114, 110, 111, 115, 112, 112,
- 113, 103, 103, 103, 103, 103, 114, 115, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 116, 103, 116, 103, 116,
-
- 103, 103, 0, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103
- } ;
-
-static yyconst flex_int16_t yy_nxt[339] =
- { 0,
- 12, 13, 14, 15, 12, 16, 12, 12, 12, 17,
- 18, 18, 18, 12, 19, 20, 20, 12, 12, 21,
- 19, 21, 19, 22, 20, 20, 20, 20, 20, 20,
- 20, 20, 20, 12, 12, 12, 32, 32, 102, 23,
- 12, 12, 12, 34, 20, 32, 32, 32, 32, 20,
- 20, 20, 20, 20, 24, 24, 24, 35, 25, 54,
- 54, 54, 26, 25, 25, 25, 25, 12, 13, 14,
- 15, 27, 12, 27, 27, 27, 23, 27, 27, 27,
- 12, 28, 28, 28, 12, 12, 28, 28, 28, 28,
- 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-
- 12, 12, 29, 36, 103, 34, 17, 30, 31, 31,
- 29, 54, 54, 54, 17, 30, 31, 31, 39, 35,
- 52, 40, 52, 52, 52, 103, 78, 38, 38, 46,
- 101, 60, 79, 41, 69, 97, 42, 94, 43, 45,
- 45, 45, 46, 45, 47, 47, 93, 92, 45, 45,
- 45, 45, 47, 47, 47, 47, 47, 47, 47, 47,
- 47, 47, 47, 47, 47, 39, 47, 91, 40, 90,
- 99, 47, 47, 47, 47, 54, 54, 54, 89, 88,
- 41, 55, 87, 49, 100, 43, 51, 51, 51, 86,
- 51, 95, 95, 96, 85, 51, 51, 51, 51, 52,
-
- 99, 52, 52, 52, 95, 95, 96, 84, 46, 83,
- 82, 81, 39, 79, 100, 33, 33, 33, 33, 33,
- 33, 33, 33, 37, 80, 77, 37, 37, 37, 44,
- 40, 44, 50, 76, 50, 52, 75, 52, 74, 52,
- 52, 53, 73, 53, 53, 53, 53, 56, 56, 56,
- 72, 56, 56, 57, 71, 57, 57, 59, 59, 59,
- 59, 59, 59, 59, 59, 61, 61, 61, 61, 61,
- 61, 61, 61, 67, 70, 67, 68, 68, 68, 62,
- 68, 68, 98, 98, 98, 98, 98, 98, 98, 98,
- 60, 66, 65, 64, 63, 62, 60, 58, 103, 48,
-
- 48, 103, 11, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103
- } ;
-
-static yyconst flex_int16_t yy_chk[339] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 3, 13, 13, 101, 3,
- 3, 3, 3, 15, 3, 14, 14, 32, 32, 3,
- 3, 3, 3, 3, 5, 5, 5, 15, 5, 31,
- 31, 31, 5, 5, 5, 5, 5, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-
- 7, 7, 9, 16, 29, 33, 9, 9, 9, 9,
- 10, 54, 54, 54, 10, 10, 10, 10, 17, 33,
- 28, 17, 28, 28, 28, 100, 72, 16, 29, 28,
- 97, 60, 72, 17, 60, 94, 17, 92, 17, 19,
- 19, 19, 19, 19, 19, 19, 91, 88, 19, 19,
- 19, 19, 19, 19, 19, 19, 19, 19, 19, 19,
- 19, 19, 20, 20, 20, 23, 20, 87, 23, 86,
- 96, 20, 20, 20, 20, 30, 30, 30, 85, 84,
- 23, 30, 83, 23, 96, 23, 25, 25, 25, 82,
- 25, 93, 93, 93, 81, 25, 25, 25, 25, 53,
-
- 98, 53, 53, 53, 95, 95, 95, 80, 53, 79,
- 78, 77, 76, 74, 98, 104, 104, 104, 104, 104,
- 104, 104, 104, 105, 73, 71, 105, 105, 105, 106,
- 70, 106, 107, 69, 107, 108, 68, 108, 66, 108,
- 108, 109, 65, 109, 109, 109, 109, 110, 110, 110,
- 64, 110, 110, 111, 63, 111, 111, 112, 112, 112,
- 112, 112, 112, 112, 112, 113, 113, 113, 113, 113,
- 113, 113, 113, 114, 62, 114, 115, 115, 115, 61,
- 115, 115, 116, 116, 116, 116, 116, 116, 116, 116,
- 59, 49, 43, 42, 41, 40, 39, 38, 35, 22,
-
- 21, 11, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103
- } ;
-
-/* Table of booleans, true if rule could match eol. */
-static yyconst flex_int32_t yy_rule_can_match_eol[21] =
- { 0,
-1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
- 0, };
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-extern int yy_flex_debug;
-int yy_flex_debug = 0;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "dtc-lexer.l"
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-
-
-
-#line 37 "dtc-lexer.l"
-#include "dtc.h"
-#include "srcpos.h"
-#include "dtc-parser.tab.h"
-
-
-/*#define LEXDEBUG 1*/
-
-#ifdef LEXDEBUG
-#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
-#else
-#define DPRINT(fmt, ...) do { } while (0)
-#endif
-
-static int dts_version; /* = 0 */
-
-#define BEGIN_DEFAULT() if (dts_version == 0) { \
- DPRINT("<INITIAL>\n"); \
- BEGIN(INITIAL); \
- } else { \
- DPRINT("<V1>\n"); \
- BEGIN(V1); \
- }
-
-static void push_input_file(const char *filename);
-static int pop_input_file(void);
-#line 638 "dtc-lexer.lex.c"
-
-#define INITIAL 0
-#define INCLUDE 1
-#define BYTESTRING 2
-#define PROPNODENAME 3
-#define V1 4
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap (void );
-#else
-extern int yywrap (void );
-#endif
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- int n; \
- for ( n = 0; n < max_size && \
- (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(yyin); \
- } \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int yylex (void);
-
-#define YY_DECL int yylex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
-#line 64 "dtc-lexer.l"
-
-#line 795 "dtc-lexer.lex.c"
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! yyin )
- yyin = stdin;
-
- if ( ! yyout )
- yyout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of yytext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
-yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 303 );
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
- if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
- {
- int yyl;
- for ( yyl = 0; yyl < yyleng; ++yyl )
- if ( yytext[yyl] == '\n' )
-
- yylineno++;
-;
- }
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = (yy_hold_char);
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
-
-case 1:
-/* rule 1 can match eol */
-YY_RULE_SETUP
-#line 65 "dtc-lexer.l"
-{
- char *name = strchr(yytext, '\"') + 1;
- yytext[yyleng-1] = '\0';
- push_input_file(name);
- }
- YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(INCLUDE):
-case YY_STATE_EOF(BYTESTRING):
-case YY_STATE_EOF(PROPNODENAME):
-case YY_STATE_EOF(V1):
-#line 71 "dtc-lexer.l"
-{
- if (!pop_input_file()) {
- yyterminate();
- }
- }
- YY_BREAK
-case 2:
-/* rule 2 can match eol */
-YY_RULE_SETUP
-#line 77 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("String: %s\n", yytext);
- yylval.data = data_copy_escape_string(yytext+1,
- yyleng-2);
- yylloc.first_line = yylineno;
- return DT_STRING;
- }
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 87 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /dts-v1/\n");
- dts_version = 1;
- BEGIN_DEFAULT();
- return DT_V1;
- }
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 96 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /memreserve/\n");
- BEGIN_DEFAULT();
- return DT_MEMRESERVE;
- }
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 104 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Label: %s\n", yytext);
- yylval.labelref = strdup(yytext);
- yylval.labelref[yyleng-1] = '\0';
- return DT_LABEL;
- }
- YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 113 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- if (*yytext == 'b')
- yylval.cbase = 2;
- else if (*yytext == 'o')
- yylval.cbase = 8;
- else if (*yytext == 'd')
- yylval.cbase = 10;
- else
- yylval.cbase = 16;
- DPRINT("Base: %d\n", yylval.cbase);
- return DT_BASE;
- }
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 128 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LEGACYLITERAL;
- }
- YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 136 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LITERAL;
- }
- YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 144 "dtc-lexer.l"
-{ /* label reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 152 "dtc-lexer.l"
-{ /* new-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yytext[yyleng-1] = '\0';
- DPRINT("Ref: %s\n", yytext+2);
- yylval.labelref = strdup(yytext+2);
- return DT_REF;
- }
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 161 "dtc-lexer.l"
-{ /* old-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 169 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.byte = strtol(yytext, NULL, 16);
- DPRINT("Byte: %02x\n", (int)yylval.byte);
- return DT_BYTE;
- }
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 177 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("/BYTESTRING\n");
- BEGIN_DEFAULT();
- return ']';
- }
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 185 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("PropNodeName: %s\n", yytext);
- yylval.propnodename = strdup(yytext);
- BEGIN_DEFAULT();
- return DT_PROPNODENAME;
- }
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 194 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Binary Include\n");
- return DT_INCBIN;
- }
- YY_BREAK
-case 16:
-/* rule 16 can match eol */
-YY_RULE_SETUP
-#line 201 "dtc-lexer.l"
-/* eat whitespace */
- YY_BREAK
-case 17:
-/* rule 17 can match eol */
-YY_RULE_SETUP
-#line 202 "dtc-lexer.l"
-/* eat C-style comments */
- YY_BREAK
-case 18:
-/* rule 18 can match eol */
-YY_RULE_SETUP
-#line 203 "dtc-lexer.l"
-/* eat C++-style comments */
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 205 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Char: %c (\\x%02x)\n", yytext[0],
- (unsigned)yytext[0]);
- if (yytext[0] == '[') {
- DPRINT("<BYTESTRING>\n");
- BEGIN(BYTESTRING);
- }
- if ((yytext[0] == '{')
- || (yytext[0] == ';')) {
- DPRINT("<PROPNODENAME>\n");
- BEGIN(PROPNODENAME);
- }
- return yytext[0];
- }
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 222 "dtc-lexer.l"
-ECHO;
- YY_BREAK
-#line 1120 "dtc-lexer.lex.c"
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed yyin at a new source and called
- * yylex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( yywrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * yytext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of yylex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- yyrestart(yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 103);
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- yyrestart(yyin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( yywrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve yytext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- if ( c == '\n' )
-
- yylineno++;
-;
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void yyrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_init_buffer(YY_CURRENT_BUFFER,input_file );
- yy_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * yypop_buffer_state();
- * yypush_buffer_state(new_buffer);
- */
- yyensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- yy_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (yywrap()) processing, but the only time this flag
- * is looked at is after yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void yy_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- yy_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with yy_create_buffer()
- *
- */
- void yy_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- yyfree((void *) b->yy_ch_buf );
-
- yyfree((void *) b );
-}
-
-#ifndef __cplusplus
-extern int isatty (int );
-#endif /* __cplusplus */
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a yyrestart() or at EOF.
- */
- static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- yy_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then yy_init_buffer was _probably_
- * called from yyrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
- */
- void yy_flush_buffer (YY_BUFFER_STATE b )
-{
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == YY_CURRENT_BUFFER )
- yy_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- * the current state. This function will allocate the stack
- * if necessary.
- * @param new_buffer The new state.
- *
- */
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
- if (new_buffer == NULL)
- return;
-
- yyensure_buffer_stack();
-
- /* This block is copied from yy_switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from yy_switch_to_buffer. */
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- * The next element becomes the new top.
- *
- */
-void yypop_buffer_state (void)
-{
- if (!YY_CURRENT_BUFFER)
- return;
-
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
-}
-
-/* Allocates the stack if it does not exist.
- * Guarantees space for at least one push.
- */
-static void yyensure_buffer_stack (void)
-{
- int num_to_alloc;
-
- if (!(yy_buffer_stack)) {
-
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
- */
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
-{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- yy_switch_to_buffer(b );
-
- return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to yylex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- *
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- * yy_scan_bytes() instead.
- */
-YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
-{
-
- return yy_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
- * scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
-{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) yyalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = yy_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- yytext[yyleng] = (yy_hold_char); \
- (yy_c_buf_p) = yytext + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- yyleng = yyless_macro_arg; \
- } \
- while ( 0 )
-
-/* Accessor methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- *
- */
-int yyget_lineno (void)
-{
-
- return yylineno;
-}
-
-/** Get the input stream.
- *
- */
-FILE *yyget_in (void)
-{
- return yyin;
-}
-
-/** Get the output stream.
- *
- */
-FILE *yyget_out (void)
-{
- return yyout;
-}
-
-/** Get the length of the current token.
- *
- */
-int yyget_leng (void)
-{
- return yyleng;
-}
-
-/** Get the current token.
- *
- */
-
-char *yyget_text (void)
-{
- return yytext;
-}
-
-/** Set the current line number.
- * @param line_number
- *
- */
-void yyset_lineno (int line_number )
-{
-
- yylineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- *
- * @see yy_switch_to_buffer
- */
-void yyset_in (FILE * in_str )
-{
- yyin = in_str ;
-}
-
-void yyset_out (FILE * out_str )
-{
- yyout = out_str ;
-}
-
-int yyget_debug (void)
-{
- return yy_flex_debug;
-}
-
-void yyset_debug (int bdebug )
-{
- yy_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
- /* Initialization is the same as for the non-reentrant scanner.
- * This function is called from yylex_destroy(), so don't allocate here.
- */
-
- /* We do not touch yylineno unless the option is enabled. */
- yylineno = 1;
-
- (yy_buffer_stack) = 0;
- (yy_buffer_stack_top) = 0;
- (yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
- (yy_init) = 0;
- (yy_start) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
- yyin = stdin;
- yyout = stdout;
-#else
- yyin = (FILE *) 0;
- yyout = (FILE *) 0;
-#endif
-
- /* For future reference: Set errno on error, since we are called by
- * yylex_init()
- */
- return 0;
-}
-
-/* yylex_destroy is for both reentrant and non-reentrant scanners. */
-int yylex_destroy (void)
-{
-
- /* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- yypop_buffer_state();
- }
-
- /* Destroy the stack itself. */
- yyfree((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
-
- /* Reset the globals. This is important in a non-reentrant scanner so the next time
- * yylex() is called, initialization will occur. */
- yy_init_globals( );
-
- return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-}
-#endif
-
-void *yyalloc (yy_size_t size )
-{
- return (void *) malloc( size );
-}
-
-void *yyrealloc (void * ptr, yy_size_t size )
-{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-}
-
-void yyfree (void * ptr )
-{
- free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-#line 222 "dtc-lexer.l"
-
-
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
- struct dtc_file *file;
- YY_BUFFER_STATE yy_prev_buf;
- int yy_prev_lineno;
- struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH (100)
-
-static int incl_depth = 0;
-
-
-static void push_input_file(const char *filename)
-{
- struct incl_file *incl_file;
- struct dtc_file *newfile;
- struct search_path search, *searchptr = NULL;
-
- assert(filename);
-
- if (incl_depth++ >= MAX_INCLUDE_DEPTH)
- die("Includes nested too deeply");
-
- if (srcpos_file) {
- search.dir = srcpos_file->dir;
- search.next = NULL;
- search.prev = NULL;
- searchptr = &search;
- }
-
- newfile = dtc_open_file(filename, searchptr);
-
- incl_file = xmalloc(sizeof(struct incl_file));
-
- /*
- * Save current context.
- */
- incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
- incl_file->yy_prev_lineno = yylineno;
- incl_file->file = srcpos_file;
- incl_file->prev = incl_file_stack;
-
- incl_file_stack = incl_file;
-
- /*
- * Establish new context.
- */
- srcpos_file = newfile;
- yylineno = 1;
- yyin = newfile->file;
- yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
-}
-
-
-static int pop_input_file(void)
-{
- struct incl_file *incl_file;
-
- if (incl_file_stack == 0)
- return 0;
-
- dtc_close_file(srcpos_file);
-
- /*
- * Pop.
- */
- --incl_depth;
- incl_file = incl_file_stack;
- incl_file_stack = incl_file->prev;
-
- /*
- * Recover old context.
- */
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(incl_file->yy_prev_buf);
- yylineno = incl_file->yy_prev_lineno;
- srcpos_file = incl_file->file;
- yyin = incl_file->file ? incl_file->file->file : NULL;
-
- /*
- * Free old state.
- */
- free(incl_file);
-
- return 1;
-}
-
+++ /dev/null
-/* A Bison parser, made by GNU Bison 2.3. */
-
-/* Skeleton implementation for Bison's Yacc-like parsers in C
-
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* C LALR(1) parser skeleton written by Richard Stallman, by
- simplifying the original so-called "semantic" parser. */
-
-/* All symbols defined below should begin with yy or YY, to avoid
- infringing on user name space. This should be done even for local
- variables, as they might otherwise be expanded by user macros.
- There are some unavoidable exceptions within include files to
- define necessary library symbols; they are noted "INFRINGES ON
- USER NAME SPACE" below. */
-
-/* Identify Bison output. */
-#define YYBISON 1
-
-/* Bison version. */
-#define YYBISON_VERSION "2.3"
-
-/* Skeleton name. */
-#define YYSKELETON_NAME "yacc.c"
-
-/* Pure parsers. */
-#define YYPURE 0
-
-/* Using locations. */
-#define YYLSP_NEEDED 1
-
-
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- DT_V1 = 258,
- DT_MEMRESERVE = 259,
- DT_PROPNODENAME = 260,
- DT_LITERAL = 261,
- DT_LEGACYLITERAL = 262,
- DT_BASE = 263,
- DT_BYTE = 264,
- DT_STRING = 265,
- DT_LABEL = 266,
- DT_REF = 267,
- DT_INCBIN = 268
- };
-#endif
-/* Tokens. */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
-
-
-
-/* Copy the first part of user declarations. */
-#line 23 "dtc-parser.y"
-
-#include <stdio.h>
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern int yylex(void);
-
-extern struct boot_info *the_boot_info;
-extern int treesource_error;
-
-static unsigned long long eval_literal(const char *s, int base, int bits);
-
-
-/* Enabling traces. */
-#ifndef YYDEBUG
-# define YYDEBUG 0
-#endif
-
-/* Enabling verbose error messages. */
-#ifdef YYERROR_VERBOSE
-# undef YYERROR_VERBOSE
-# define YYERROR_VERBOSE 1
-#else
-# define YYERROR_VERBOSE 0
-#endif
-
-/* Enabling the token table. */
-#ifndef YYTOKEN_TABLE
-# define YYTOKEN_TABLE 0
-#endif
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-#line 37 "dtc-parser.y"
-{
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-/* Line 187 of yacc.c. */
-#line 153 "dtc-parser.tab.c"
- YYSTYPE;
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
- int first_line;
- int first_column;
- int last_line;
- int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-
-/* Copy the second part of user declarations. */
-
-
-/* Line 216 of yacc.c. */
-#line 178 "dtc-parser.tab.c"
-
-#ifdef short
-# undef short
-#endif
-
-#ifdef YYTYPE_UINT8
-typedef YYTYPE_UINT8 yytype_uint8;
-#else
-typedef unsigned char yytype_uint8;
-#endif
-
-#ifdef YYTYPE_INT8
-typedef YYTYPE_INT8 yytype_int8;
-#elif (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-typedef signed char yytype_int8;
-#else
-typedef short int yytype_int8;
-#endif
-
-#ifdef YYTYPE_UINT16
-typedef YYTYPE_UINT16 yytype_uint16;
-#else
-typedef unsigned short int yytype_uint16;
-#endif
-
-#ifdef YYTYPE_INT16
-typedef YYTYPE_INT16 yytype_int16;
-#else
-typedef short int yytype_int16;
-#endif
-
-#ifndef YYSIZE_T
-# ifdef __SIZE_TYPE__
-# define YYSIZE_T __SIZE_TYPE__
-# elif defined size_t
-# define YYSIZE_T size_t
-# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-# define YYSIZE_T size_t
-# else
-# define YYSIZE_T unsigned int
-# endif
-#endif
-
-#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
-
-#ifndef YY_
-# if YYENABLE_NLS
-# if ENABLE_NLS
-# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
-# define YY_(msgid) dgettext ("bison-runtime", msgid)
-# endif
-# endif
-# ifndef YY_
-# define YY_(msgid) msgid
-# endif
-#endif
-
-/* Suppress unused-variable warnings by "using" E. */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(e) ((void) (e))
-#else
-# define YYUSE(e) /* empty */
-#endif
-
-/* Identity function, used to suppress warnings about constant conditions. */
-#ifndef lint
-# define YYID(n) (n)
-#else
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static int
-YYID (int i)
-#else
-static int
-YYID (i)
- int i;
-#endif
-{
- return i;
-}
-#endif
-
-#if ! defined yyoverflow || YYERROR_VERBOSE
-
-/* The parser invokes alloca or malloc; define the necessary symbols. */
-
-# ifdef YYSTACK_USE_ALLOCA
-# if YYSTACK_USE_ALLOCA
-# ifdef __GNUC__
-# define YYSTACK_ALLOC __builtin_alloca
-# elif defined __BUILTIN_VA_ARG_INCR
-# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
-# elif defined _AIX
-# define YYSTACK_ALLOC __alloca
-# elif defined _MSC_VER
-# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
-# define alloca _alloca
-# else
-# define YYSTACK_ALLOC alloca
-# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
-# endif
-# endif
-# endif
-# endif
-# endif
-
-# ifdef YYSTACK_ALLOC
- /* Pacify GCC's `empty if-body' warning. */
-# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
-# ifndef YYSTACK_ALLOC_MAXIMUM
- /* The OS might guarantee only one guard page at the bottom of the stack,
- and a page size can be as small as 4096 bytes. So we cannot safely
- invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
- to allow for a few compiler-allocated temporary stack slots. */
-# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
-# endif
-# else
-# define YYSTACK_ALLOC YYMALLOC
-# define YYSTACK_FREE YYFREE
-# ifndef YYSTACK_ALLOC_MAXIMUM
-# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
-# endif
-# if (defined __cplusplus && ! defined _STDLIB_H \
- && ! ((defined YYMALLOC || defined malloc) \
- && (defined YYFREE || defined free)))
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
-# endif
-# endif
-# ifndef YYMALLOC
-# define YYMALLOC malloc
-# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# ifndef YYFREE
-# define YYFREE free
-# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void free (void *); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# endif
-#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
-
-
-#if (! defined yyoverflow \
- && (! defined __cplusplus \
- || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
- && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-
-/* A type that is properly aligned for any stack member. */
-union yyalloc
-{
- yytype_int16 yyss;
- YYSTYPE yyvs;
- YYLTYPE yyls;
-};
-
-/* The size of the maximum gap between one aligned stack and the next. */
-# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-
-/* The size of an array large to enough to hold all stacks, each with
- N elements. */
-# define YYSTACK_BYTES(N) \
- ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
- + 2 * YYSTACK_GAP_MAXIMUM)
-
-/* Copy COUNT objects from FROM to TO. The source and destination do
- not overlap. */
-# ifndef YYCOPY
-# if defined __GNUC__ && 1 < __GNUC__
-# define YYCOPY(To, From, Count) \
- __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-# else
-# define YYCOPY(To, From, Count) \
- do \
- { \
- YYSIZE_T yyi; \
- for (yyi = 0; yyi < (Count); yyi++) \
- (To)[yyi] = (From)[yyi]; \
- } \
- while (YYID (0))
-# endif
-# endif
-
-/* Relocate STACK from its old location to the new one. The
- local variables YYSIZE and YYSTACKSIZE give the old and new number of
- elements in the stack, and YYPTR gives the new location of the
- stack. Advance YYPTR to a properly aligned location for the next
- stack. */
-# define YYSTACK_RELOCATE(Stack) \
- do \
- { \
- YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack, Stack, yysize); \
- Stack = &yyptr->Stack; \
- yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
- yyptr += yynewbytes / sizeof (*yyptr); \
- } \
- while (YYID (0))
-
-#endif
-
-/* YYFINAL -- State number of the termination state. */
-#define YYFINAL 9
-/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 73
-
-/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 27
-/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 20
-/* YYNRULES -- Number of rules. */
-#define YYNRULES 45
-/* YYNRULES -- Number of states. */
-#define YYNSTATES 76
-
-/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-#define YYUNDEFTOK 2
-#define YYMAXUTOK 268
-
-#define YYTRANSLATE(YYX) \
- ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
-/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-static const yytype_uint8 yytranslate[] =
-{
- 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 24, 26, 2, 2, 25, 15, 2, 16, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 14,
- 20, 19, 21, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 22, 2, 23, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 17, 2, 18, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
- 5, 6, 7, 8, 9, 10, 11, 12, 13
-};
-
-#if YYDEBUG
-/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
- YYRHS. */
-static const yytype_uint8 yyprhs[] =
-{
- 0, 0, 3, 8, 11, 12, 15, 21, 22, 25,
- 27, 34, 36, 38, 41, 47, 48, 51, 57, 61,
- 64, 69, 74, 77, 87, 93, 96, 97, 100, 103,
- 104, 107, 110, 113, 114, 116, 118, 121, 122, 125,
- 128, 129, 132, 135, 139, 140
-};
-
-/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-static const yytype_int8 yyrhs[] =
-{
- 28, 0, -1, 3, 14, 29, 34, -1, 31, 34,
- -1, -1, 30, 29, -1, 46, 4, 33, 33, 14,
- -1, -1, 32, 31, -1, 30, -1, 46, 4, 33,
- 15, 33, 14, -1, 6, -1, 7, -1, 16, 35,
- -1, 17, 36, 44, 18, 14, -1, -1, 36, 37,
- -1, 46, 5, 19, 38, 14, -1, 46, 5, 14,
- -1, 39, 10, -1, 39, 20, 40, 21, -1, 39,
- 22, 43, 23, -1, 39, 12, -1, 39, 13, 24,
- 10, 25, 33, 25, 33, 26, -1, 39, 13, 24,
- 10, 26, -1, 38, 11, -1, -1, 38, 25, -1,
- 39, 11, -1, -1, 40, 42, -1, 40, 12, -1,
- 40, 11, -1, -1, 8, -1, 6, -1, 41, 7,
- -1, -1, 43, 9, -1, 43, 11, -1, -1, 45,
- 44, -1, 45, 37, -1, 46, 5, 35, -1, -1,
- 11, -1
-};
-
-/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-static const yytype_uint16 yyrline[] =
-{
- 0, 89, 89, 93, 101, 104, 111, 119, 122, 129,
- 133, 140, 144, 151, 158, 166, 169, 176, 180, 187,
- 191, 195, 199, 203, 220, 231, 239, 242, 246, 254,
- 257, 261, 266, 274, 277, 281, 285, 293, 296, 300,
- 308, 311, 315, 323, 331, 334
-};
-#endif
-
-#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
-/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
- First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-static const char *const yytname[] =
-{
- "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
- "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
- "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
- "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
- "')'", "$accept", "sourcefile", "memreserves", "memreserve",
- "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
- "proplist", "propdef", "propdata", "propdataprefix", "celllist",
- "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
-};
-#endif
-
-# ifdef YYPRINT
-/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
- token YYLEX-NUM. */
-static const yytype_uint16 yytoknum[] =
-{
- 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
- 265, 266, 267, 268, 59, 45, 47, 123, 125, 61,
- 60, 62, 91, 93, 40, 44, 41
-};
-# endif
-
-/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-static const yytype_uint8 yyr1[] =
-{
- 0, 27, 28, 28, 29, 29, 30, 31, 31, 32,
- 32, 33, 33, 34, 35, 36, 36, 37, 37, 38,
- 38, 38, 38, 38, 38, 38, 39, 39, 39, 40,
- 40, 40, 40, 41, 41, 42, 42, 43, 43, 43,
- 44, 44, 44, 45, 46, 46
-};
-
-/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-static const yytype_uint8 yyr2[] =
-{
- 0, 2, 4, 2, 0, 2, 5, 0, 2, 1,
- 6, 1, 1, 2, 5, 0, 2, 5, 3, 2,
- 4, 4, 2, 9, 5, 2, 0, 2, 2, 0,
- 2, 2, 2, 0, 1, 1, 2, 0, 2, 2,
- 0, 2, 2, 3, 0, 1
-};
-
-/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
- STATE-NUM when YYTABLE doesn't specify something else to do. Zero
- means the default is an error. */
-static const yytype_uint8 yydefact[] =
-{
- 7, 0, 45, 0, 9, 0, 7, 0, 4, 1,
- 0, 3, 8, 0, 0, 4, 0, 15, 13, 11,
- 12, 0, 2, 5, 0, 40, 0, 0, 0, 16,
- 0, 40, 0, 0, 6, 0, 42, 41, 0, 10,
- 14, 18, 26, 43, 0, 0, 25, 17, 27, 19,
- 28, 22, 0, 29, 37, 0, 33, 0, 0, 35,
- 34, 32, 31, 20, 0, 30, 38, 39, 21, 0,
- 24, 36, 0, 0, 0, 23
-};
-
-/* YYDEFGOTO[NTERM-NUM]. */
-static const yytype_int8 yydefgoto[] =
-{
- -1, 3, 14, 4, 5, 6, 27, 11, 18, 25,
- 29, 44, 45, 56, 64, 65, 57, 30, 31, 7
-};
-
-/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
- STATE-NUM. */
-#define YYPACT_NINF -14
-static const yytype_int8 yypact[] =
-{
- 30, -11, -14, 7, -14, -1, 27, 13, 27, -14,
- 8, -14, -14, 40, -1, 27, 35, -14, -14, -14,
- -14, 21, -14, -14, 40, 24, 40, 28, 40, -14,
- 32, 24, 46, 38, -14, 39, -14, -14, 26, -14,
- -14, -14, -14, -14, -9, 10, -14, -14, -14, -14,
- -14, -14, 31, -14, -14, 44, -2, 3, 23, -14,
- -14, -14, -14, -14, 50, -14, -14, -14, -14, 40,
- -14, -14, 33, 40, 36, -14
-};
-
-/* YYPGOTO[NTERM-NUM]. */
-static const yytype_int8 yypgoto[] =
-{
- -14, -14, 48, 29, 53, -14, -13, 47, 34, -14,
- 37, -14, -14, -14, -14, -14, -14, 42, -14, -7
-};
-
-/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
- positive, shift that token. If negative, reduce the rule which
- number is the opposite. If zero, do what YYDEFACT says.
- If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -45
-static const yytype_int8 yytable[] =
-{
- 21, 16, 46, 8, 59, 47, 60, 9, 16, 61,
- 62, 28, 66, 33, 67, 10, 48, 13, 32, 63,
- 49, 50, 51, 52, 32, 17, 68, 19, 20, -44,
- 53, -44, 54, 1, -44, 2, 26, 15, 2, 24,
- 41, 2, 34, 17, 15, 42, 19, 20, 69, 70,
- 35, 38, 39, 40, 58, 55, 72, 71, 73, 12,
- 74, 22, 75, 23, 0, 0, 0, 0, 36, 0,
- 0, 0, 43, 37
-};
-
-static const yytype_int8 yycheck[] =
-{
- 13, 8, 11, 14, 6, 14, 8, 0, 15, 11,
- 12, 24, 9, 26, 11, 16, 25, 4, 25, 21,
- 10, 11, 12, 13, 31, 17, 23, 6, 7, 5,
- 20, 4, 22, 3, 4, 11, 15, 8, 11, 4,
- 14, 11, 14, 17, 15, 19, 6, 7, 25, 26,
- 18, 5, 14, 14, 10, 24, 69, 7, 25, 6,
- 73, 14, 26, 15, -1, -1, -1, -1, 31, -1,
- -1, -1, 38, 31
-};
-
-/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
- symbol of state STATE-NUM. */
-static const yytype_uint8 yystos[] =
-{
- 0, 3, 11, 28, 30, 31, 32, 46, 14, 0,
- 16, 34, 31, 4, 29, 30, 46, 17, 35, 6,
- 7, 33, 34, 29, 4, 36, 15, 33, 33, 37,
- 44, 45, 46, 33, 14, 18, 37, 44, 5, 14,
- 14, 14, 19, 35, 38, 39, 11, 14, 25, 10,
- 11, 12, 13, 20, 22, 24, 40, 43, 10, 6,
- 8, 11, 12, 21, 41, 42, 9, 11, 23, 25,
- 26, 7, 33, 25, 33, 26
-};
-
-#define yyerrok (yyerrstatus = 0)
-#define yyclearin (yychar = YYEMPTY)
-#define YYEMPTY (-2)
-#define YYEOF 0
-
-#define YYACCEPT goto yyacceptlab
-#define YYABORT goto yyabortlab
-#define YYERROR goto yyerrorlab
-
-
-/* Like YYERROR except do call yyerror. This remains here temporarily
- to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. */
-
-#define YYFAIL goto yyerrlab
-
-#define YYRECOVERING() (!!yyerrstatus)
-
-#define YYBACKUP(Token, Value) \
-do \
- if (yychar == YYEMPTY && yylen == 1) \
- { \
- yychar = (Token); \
- yylval = (Value); \
- yytoken = YYTRANSLATE (yychar); \
- YYPOPSTACK (1); \
- goto yybackup; \
- } \
- else \
- { \
- yyerror (YY_("syntax error: cannot back up")); \
- YYERROR; \
- } \
-while (YYID (0))
-
-
-#define YYTERROR 1
-#define YYERRCODE 256
-
-
-/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
- If N is 0, then set CURRENT to the empty location which ends
- the previous symbol: RHS[0] (always defined). */
-
-#define YYRHSLOC(Rhs, K) ((Rhs)[K])
-#ifndef YYLLOC_DEFAULT
-# define YYLLOC_DEFAULT(Current, Rhs, N) \
- do \
- if (YYID (N)) \
- { \
- (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
- (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
- (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
- (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- } \
- else \
- { \
- (Current).first_line = (Current).last_line = \
- YYRHSLOC (Rhs, 0).last_line; \
- (Current).first_column = (Current).last_column = \
- YYRHSLOC (Rhs, 0).last_column; \
- } \
- while (YYID (0))
-#endif
-
-
-/* YY_LOCATION_PRINT -- Print the location on the stream.
- This macro was not mandated originally: define only if we know
- we won't break user code: when these are the locations we know. */
-
-#ifndef YY_LOCATION_PRINT
-# if YYLTYPE_IS_TRIVIAL
-# define YY_LOCATION_PRINT(File, Loc) \
- fprintf (File, "%d.%d-%d.%d", \
- (Loc).first_line, (Loc).first_column, \
- (Loc).last_line, (Loc).last_column)
-# else
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-# endif
-#endif
-
-
-/* YYLEX -- calling `yylex' with the right arguments. */
-
-#ifdef YYLEX_PARAM
-# define YYLEX yylex (YYLEX_PARAM)
-#else
-# define YYLEX yylex ()
-#endif
-
-/* Enable debugging if requested. */
-#if YYDEBUG
-
-# ifndef YYFPRINTF
-# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-# define YYFPRINTF fprintf
-# endif
-
-# define YYDPRINTF(Args) \
-do { \
- if (yydebug) \
- YYFPRINTF Args; \
-} while (YYID (0))
-
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
-do { \
- if (yydebug) \
- { \
- YYFPRINTF (stderr, "%s ", Title); \
- yy_symbol_print (stderr, \
- Type, Value, Location); \
- YYFPRINTF (stderr, "\n"); \
- } \
-} while (YYID (0))
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
-#else
-static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
- YYLTYPE const * const yylocationp;
-#endif
-{
- if (!yyvaluep)
- return;
- YYUSE (yylocationp);
-# ifdef YYPRINT
- if (yytype < YYNTOKENS)
- YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-# else
- YYUSE (yyoutput);
-# endif
- switch (yytype)
- {
- default:
- break;
- }
-}
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
-#else
-static void
-yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
- YYLTYPE const * const yylocationp;
-#endif
-{
- if (yytype < YYNTOKENS)
- YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
- else
- YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
- YY_LOCATION_PRINT (yyoutput, *yylocationp);
- YYFPRINTF (yyoutput, ": ");
- yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
- YYFPRINTF (yyoutput, ")");
-}
-
-/*------------------------------------------------------------------.
-| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-| TOP (included). |
-`------------------------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
-#else
-static void
-yy_stack_print (bottom, top)
- yytype_int16 *bottom;
- yytype_int16 *top;
-#endif
-{
- YYFPRINTF (stderr, "Stack now");
- for (; bottom <= top; ++bottom)
- YYFPRINTF (stderr, " %d", *bottom);
- YYFPRINTF (stderr, "\n");
-}
-
-# define YY_STACK_PRINT(Bottom, Top) \
-do { \
- if (yydebug) \
- yy_stack_print ((Bottom), (Top)); \
-} while (YYID (0))
-
-
-/*------------------------------------------------.
-| Report that the YYRULE is going to be reduced. |
-`------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
-#else
-static void
-yy_reduce_print (yyvsp, yylsp, yyrule)
- YYSTYPE *yyvsp;
- YYLTYPE *yylsp;
- int yyrule;
-#endif
-{
- int yynrhs = yyr2[yyrule];
- int yyi;
- unsigned long int yylno = yyrline[yyrule];
- YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
- yyrule - 1, yylno);
- /* The symbols being reduced. */
- for (yyi = 0; yyi < yynrhs; yyi++)
- {
- fprintf (stderr, " $%d = ", yyi + 1);
- yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
- &(yyvsp[(yyi + 1) - (yynrhs)])
- , &(yylsp[(yyi + 1) - (yynrhs)]) );
- fprintf (stderr, "\n");
- }
-}
-
-# define YY_REDUCE_PRINT(Rule) \
-do { \
- if (yydebug) \
- yy_reduce_print (yyvsp, yylsp, Rule); \
-} while (YYID (0))
-
-/* Nonzero means print parse trace. It is left uninitialized so that
- multiple parsers can coexist. */
-int yydebug;
-#else /* !YYDEBUG */
-# define YYDPRINTF(Args)
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
-# define YY_STACK_PRINT(Bottom, Top)
-# define YY_REDUCE_PRINT(Rule)
-#endif /* !YYDEBUG */
-
-
-/* YYINITDEPTH -- initial size of the parser's stacks. */
-#ifndef YYINITDEPTH
-# define YYINITDEPTH 200
-#endif
-
-/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
- if the built-in stack extension method is used).
-
- Do not make this value too large; the results are undefined if
- YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
- evaluated with infinite-precision integer arithmetic. */
-
-#ifndef YYMAXDEPTH
-# define YYMAXDEPTH 10000
-#endif
-
-\f
-
-#if YYERROR_VERBOSE
-
-# ifndef yystrlen
-# if defined __GLIBC__ && defined _STRING_H
-# define yystrlen strlen
-# else
-/* Return the length of YYSTR. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static YYSIZE_T
-yystrlen (const char *yystr)
-#else
-static YYSIZE_T
-yystrlen (yystr)
- const char *yystr;
-#endif
-{
- YYSIZE_T yylen;
- for (yylen = 0; yystr[yylen]; yylen++)
- continue;
- return yylen;
-}
-# endif
-# endif
-
-# ifndef yystpcpy
-# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
-# define yystpcpy stpcpy
-# else
-/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
- YYDEST. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static char *
-yystpcpy (char *yydest, const char *yysrc)
-#else
-static char *
-yystpcpy (yydest, yysrc)
- char *yydest;
- const char *yysrc;
-#endif
-{
- char *yyd = yydest;
- const char *yys = yysrc;
-
- while ((*yyd++ = *yys++) != '\0')
- continue;
-
- return yyd - 1;
-}
-# endif
-# endif
-
-# ifndef yytnamerr
-/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
- quotes and backslashes, so that it's suitable for yyerror. The
- heuristic is that double-quoting is unnecessary unless the string
- contains an apostrophe, a comma, or backslash (other than
- backslash-backslash). YYSTR is taken from yytname. If YYRES is
- null, do not copy; instead, return the length of what the result
- would have been. */
-static YYSIZE_T
-yytnamerr (char *yyres, const char *yystr)
-{
- if (*yystr == '"')
- {
- YYSIZE_T yyn = 0;
- char const *yyp = yystr;
-
- for (;;)
- switch (*++yyp)
- {
- case '\'':
- case ',':
- goto do_not_strip_quotes;
-
- case '\\':
- if (*++yyp != '\\')
- goto do_not_strip_quotes;
- /* Fall through. */
- default:
- if (yyres)
- yyres[yyn] = *yyp;
- yyn++;
- break;
-
- case '"':
- if (yyres)
- yyres[yyn] = '\0';
- return yyn;
- }
- do_not_strip_quotes: ;
- }
-
- if (! yyres)
- return yystrlen (yystr);
-
- return yystpcpy (yyres, yystr) - yyres;
-}
-# endif
-
-/* Copy into YYRESULT an error message about the unexpected token
- YYCHAR while in state YYSTATE. Return the number of bytes copied,
- including the terminating null byte. If YYRESULT is null, do not
- copy anything; just return the number of bytes that would be
- copied. As a special case, return 0 if an ordinary "syntax error"
- message will do. Return YYSIZE_MAXIMUM if overflow occurs during
- size calculation. */
-static YYSIZE_T
-yysyntax_error (char *yyresult, int yystate, int yychar)
-{
- int yyn = yypact[yystate];
-
- if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
- return 0;
- else
- {
- int yytype = YYTRANSLATE (yychar);
- YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
- YYSIZE_T yysize = yysize0;
- YYSIZE_T yysize1;
- int yysize_overflow = 0;
- enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
- char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
- int yyx;
-
-# if 0
- /* This is so xgettext sees the translatable formats that are
- constructed on the fly. */
- YY_("syntax error, unexpected %s");
- YY_("syntax error, unexpected %s, expecting %s");
- YY_("syntax error, unexpected %s, expecting %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
-# endif
- char *yyfmt;
- char const *yyf;
- static char const yyunexpected[] = "syntax error, unexpected %s";
- static char const yyexpecting[] = ", expecting %s";
- static char const yyor[] = " or %s";
- char yyformat[sizeof yyunexpected
- + sizeof yyexpecting - 1
- + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
- * (sizeof yyor - 1))];
- char const *yyprefix = yyexpecting;
-
- /* Start YYX at -YYN if negative to avoid negative indexes in
- YYCHECK. */
- int yyxbegin = yyn < 0 ? -yyn : 0;
-
- /* Stay within bounds of both yycheck and yytname. */
- int yychecklim = YYLAST - yyn + 1;
- int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
- int yycount = 1;
-
- yyarg[0] = yytname[yytype];
- yyfmt = yystpcpy (yyformat, yyunexpected);
-
- for (yyx = yyxbegin; yyx < yyxend; ++yyx)
- if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
- if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
- {
- yycount = 1;
- yysize = yysize0;
- yyformat[sizeof yyunexpected - 1] = '\0';
- break;
- }
- yyarg[yycount++] = yytname[yyx];
- yysize1 = yysize + yytnamerr (0, yytname[yyx]);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
- yyfmt = yystpcpy (yyfmt, yyprefix);
- yyprefix = yyor;
- }
-
- yyf = YY_(yyformat);
- yysize1 = yysize + yystrlen (yyf);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
-
- if (yysize_overflow)
- return YYSIZE_MAXIMUM;
-
- if (yyresult)
- {
- /* Avoid sprintf, as that infringes on the user's name space.
- Don't have undefined behavior even if the translation
- produced a string with the wrong number of "%s"s. */
- char *yyp = yyresult;
- int yyi = 0;
- while ((*yyp = *yyf) != '\0')
- {
- if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
- {
- yyp += yytnamerr (yyp, yyarg[yyi++]);
- yyf += 2;
- }
- else
- {
- yyp++;
- yyf++;
- }
- }
- }
- return yysize;
- }
-}
-#endif /* YYERROR_VERBOSE */
-\f
-
-/*-----------------------------------------------.
-| Release the memory associated to this symbol. |
-`-----------------------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
-#else
-static void
-yydestruct (yymsg, yytype, yyvaluep, yylocationp)
- const char *yymsg;
- int yytype;
- YYSTYPE *yyvaluep;
- YYLTYPE *yylocationp;
-#endif
-{
- YYUSE (yyvaluep);
- YYUSE (yylocationp);
-
- if (!yymsg)
- yymsg = "Deleting";
- YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
- switch (yytype)
- {
-
- default:
- break;
- }
-}
-\f
-
-/* Prevent warnings from -Wmissing-prototypes. */
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void *YYPARSE_PARAM);
-#else
-int yyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void);
-#else
-int yyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-
-
-/* The look-ahead symbol. */
-int yychar;
-
-/* The semantic value of the look-ahead symbol. */
-YYSTYPE yylval;
-
-/* Number of syntax errors so far. */
-int yynerrs;
-/* Location data for the look-ahead symbol. */
-YYLTYPE yylloc;
-
-
-
-/*----------.
-| yyparse. |
-`----------*/
-
-#ifdef YYPARSE_PARAM
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void *YYPARSE_PARAM)
-#else
-int
-yyparse (YYPARSE_PARAM)
- void *YYPARSE_PARAM;
-#endif
-#else /* ! YYPARSE_PARAM */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void)
-#else
-int
-yyparse ()
-
-#endif
-#endif
-{
-
- int yystate;
- int yyn;
- int yyresult;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
- /* Look-ahead token as an internal (translated) token number. */
- int yytoken = 0;
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
- /* Three stacks and their tools:
- `yyss': related to states,
- `yyvs': related to semantic values,
- `yyls': related to locations.
-
- Refer to the stacks thru separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
-
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss = yyssa;
- yytype_int16 *yyssp;
-
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs = yyvsa;
- YYSTYPE *yyvsp;
-
- /* The location stack. */
- YYLTYPE yylsa[YYINITDEPTH];
- YYLTYPE *yyls = yylsa;
- YYLTYPE *yylsp;
- /* The locations where the error started and ended. */
- YYLTYPE yyerror_range[2];
-
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
-
- YYSIZE_T yystacksize = YYINITDEPTH;
-
- /* The variables used to return semantic value and location from the
- action routines. */
- YYSTYPE yyval;
- YYLTYPE yyloc;
-
- /* The number of symbols on the RHS of the reduced rule.
- Keep to zero when no symbol should be popped. */
- int yylen = 0;
-
- YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
- yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
-
- /* Initialize stack pointers.
- Waste one element of value and location stack
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
-
- yyssp = yyss;
- yyvsp = yyvs;
- yylsp = yyls;
-#if YYLTYPE_IS_TRIVIAL
- /* Initialize the default location before parsing starts. */
- yylloc.first_line = yylloc.last_line = 1;
- yylloc.first_column = yylloc.last_column = 0;
-#endif
-
- goto yysetstate;
-
-/*------------------------------------------------------------.
-| yynewstate -- Push a new state, which is found in yystate. |
-`------------------------------------------------------------*/
- yynewstate:
- /* In all cases, when you get here, the value and location stacks
- have just been pushed. So pushing a state here evens the stacks. */
- yyssp++;
-
- yysetstate:
- *yyssp = yystate;
-
- if (yyss + yystacksize - 1 <= yyssp)
- {
- /* Get the current used size of the three stacks, in elements. */
- YYSIZE_T yysize = yyssp - yyss + 1;
-
-#ifdef yyoverflow
- {
- /* Give user a chance to reallocate the stack. Use copies of
- these so that the &'s don't force the real ones into
- memory. */
- YYSTYPE *yyvs1 = yyvs;
- yytype_int16 *yyss1 = yyss;
- YYLTYPE *yyls1 = yyls;
-
- /* Each stack pointer address is followed by the size of the
- data in use in that stack, in bytes. This used to be a
- conditional around just the two extra args, but that might
- be undefined if yyoverflow is a macro. */
- yyoverflow (YY_("memory exhausted"),
- &yyss1, yysize * sizeof (*yyssp),
- &yyvs1, yysize * sizeof (*yyvsp),
- &yyls1, yysize * sizeof (*yylsp),
- &yystacksize);
- yyls = yyls1;
- yyss = yyss1;
- yyvs = yyvs1;
- }
-#else /* no yyoverflow */
-# ifndef YYSTACK_RELOCATE
- goto yyexhaustedlab;
-# else
- /* Extend the stack our own way. */
- if (YYMAXDEPTH <= yystacksize)
- goto yyexhaustedlab;
- yystacksize *= 2;
- if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
-
- {
- yytype_int16 *yyss1 = yyss;
- union yyalloc *yyptr =
- (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
- if (! yyptr)
- goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss);
- YYSTACK_RELOCATE (yyvs);
- YYSTACK_RELOCATE (yyls);
-# undef YYSTACK_RELOCATE
- if (yyss1 != yyssa)
- YYSTACK_FREE (yyss1);
- }
-# endif
-#endif /* no yyoverflow */
-
- yyssp = yyss + yysize - 1;
- yyvsp = yyvs + yysize - 1;
- yylsp = yyls + yysize - 1;
-
- YYDPRINTF ((stderr, "Stack size increased to %lu\n",
- (unsigned long int) yystacksize));
-
- if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
- YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- goto yybackup;
-
-/*-----------.
-| yybackup. |
-`-----------*/
-yybackup:
-
- /* Do appropriate processing given the current state. Read a
- look-ahead token if we need one and don't already have one. */
-
- /* First try to decide what to do without reference to look-ahead token. */
- yyn = yypact[yystate];
- if (yyn == YYPACT_NINF)
- goto yydefault;
-
- /* Not known => get a look-ahead token if don't already have one. */
-
- /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
- if (yychar == YYEMPTY)
- {
- YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
- if (yychar <= YYEOF)
- {
- yychar = yytoken = YYEOF;
- YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
- yytoken = YYTRANSLATE (yychar);
- YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
- }
-
- /* If the proper action on seeing token YYTOKEN is to reduce or to
- detect an error, take that action. */
- yyn += yytoken;
- if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
- yyn = yytable[yyn];
- if (yyn <= 0)
- {
- if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- /* Count tokens shifted since error; after three, turn off error
- status. */
- if (yyerrstatus)
- yyerrstatus--;
-
- /* Shift the look-ahead token. */
- YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
-
- /* Discard the shifted token unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
-
- yystate = yyn;
- *++yyvsp = yylval;
- *++yylsp = yylloc;
- goto yynewstate;
-
-
-/*-----------------------------------------------------------.
-| yydefault -- do the default action for the current state. |
-`-----------------------------------------------------------*/
-yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
- goto yyreduce;
-
-
-/*-----------------------------.
-| yyreduce -- Do a reduction. |
-`-----------------------------*/
-yyreduce:
- /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-
- /* If YYLEN is nonzero, implement the default value of the action:
- `$$ = $1'.
-
- Otherwise, the following line sets YYVAL to garbage.
- This behavior is undocumented and Bison
- users should not rely upon it. Assigning to YYVAL
- unconditionally makes the parser a bit smaller, and it avoids a
- GCC warning that YYVAL may be used uninitialized. */
- yyval = yyvsp[1-yylen];
-
- /* Default location. */
- YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
- YY_REDUCE_PRINT (yyn);
- switch (yyn)
- {
- case 2:
-#line 90 "dtc-parser.y"
- {
- the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
- ;}
- break;
-
- case 3:
-#line 94 "dtc-parser.y"
- {
- the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
- ;}
- break;
-
- case 4:
-#line 101 "dtc-parser.y"
- {
- (yyval.re) = NULL;
- ;}
- break;
-
- case 5:
-#line 105 "dtc-parser.y"
- {
- (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
- ;}
- break;
-
- case 6:
-#line 112 "dtc-parser.y"
- {
- (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
- ;}
- break;
-
- case 7:
-#line 119 "dtc-parser.y"
- {
- (yyval.re) = NULL;
- ;}
- break;
-
- case 8:
-#line 123 "dtc-parser.y"
- {
- (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
- ;}
- break;
-
- case 9:
-#line 130 "dtc-parser.y"
- {
- (yyval.re) = (yyvsp[(1) - (1)].re);
- ;}
- break;
-
- case 10:
-#line 134 "dtc-parser.y"
- {
- (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
- ;}
- break;
-
- case 11:
-#line 141 "dtc-parser.y"
- {
- (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
- ;}
- break;
-
- case 12:
-#line 145 "dtc-parser.y"
- {
- (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
- ;}
- break;
-
- case 13:
-#line 152 "dtc-parser.y"
- {
- (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
- ;}
- break;
-
- case 14:
-#line 159 "dtc-parser.y"
- {
- (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
- ;}
- break;
-
- case 15:
-#line 166 "dtc-parser.y"
- {
- (yyval.proplist) = NULL;
- ;}
- break;
-
- case 16:
-#line 170 "dtc-parser.y"
- {
- (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
- ;}
- break;
-
- case 17:
-#line 177 "dtc-parser.y"
- {
- (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
- ;}
- break;
-
- case 18:
-#line 181 "dtc-parser.y"
- {
- (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
- ;}
- break;
-
- case 19:
-#line 188 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
- ;}
- break;
-
- case 20:
-#line 192 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 21:
-#line 196 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 22:
-#line 200 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 23:
-#line 204 "dtc-parser.y"
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
- struct data d = empty_data;
-
- if ((yyvsp[(6) - (9)].addr) != 0)
- if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
- yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
- (unsigned long long)(yyvsp[(6) - (9)].addr),
- (yyvsp[(4) - (9)].data).val, strerror(errno));
-
- d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
-
- (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
- dtc_close_file(file);
- ;}
- break;
-
- case 24:
-#line 221 "dtc-parser.y"
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
- struct data d = empty_data;
-
- d = data_copy_file(file->file, -1);
-
- (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
- dtc_close_file(file);
- ;}
- break;
-
- case 25:
-#line 232 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 26:
-#line 239 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 27:
-#line 243 "dtc-parser.y"
- {
- (yyval.data) = (yyvsp[(1) - (2)].data);
- ;}
- break;
-
- case 28:
-#line 247 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 29:
-#line 254 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 30:
-#line 258 "dtc-parser.y"
- {
- (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
- ;}
- break;
-
- case 31:
-#line 262 "dtc-parser.y"
- {
- (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
- (yyvsp[(2) - (2)].labelref)), -1);
- ;}
- break;
-
- case 32:
-#line 267 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 33:
-#line 274 "dtc-parser.y"
- {
- (yyval.cbase) = 16;
- ;}
- break;
-
- case 35:
-#line 282 "dtc-parser.y"
- {
- (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
- ;}
- break;
-
- case 36:
-#line 286 "dtc-parser.y"
- {
- (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
- ;}
- break;
-
- case 37:
-#line 293 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 38:
-#line 297 "dtc-parser.y"
- {
- (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
- ;}
- break;
-
- case 39:
-#line 301 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 40:
-#line 308 "dtc-parser.y"
- {
- (yyval.nodelist) = NULL;
- ;}
- break;
-
- case 41:
-#line 312 "dtc-parser.y"
- {
- (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
- ;}
- break;
-
- case 42:
-#line 316 "dtc-parser.y"
- {
- yyerror("syntax error: properties must precede subnodes");
- YYERROR;
- ;}
- break;
-
- case 43:
-#line 324 "dtc-parser.y"
- {
- (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
- ;}
- break;
-
- case 44:
-#line 331 "dtc-parser.y"
- {
- (yyval.labelref) = NULL;
- ;}
- break;
-
- case 45:
-#line 335 "dtc-parser.y"
- {
- (yyval.labelref) = (yyvsp[(1) - (1)].labelref);
- ;}
- break;
-
-
-/* Line 1267 of yacc.c. */
-#line 1780 "dtc-parser.tab.c"
- default: break;
- }
- YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
-
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
- *++yylsp = yyloc;
-
- /* Now `shift' the result of the reduction. Determine what state
- that goes to, based on the state we popped back to and the rule
- number reduced by. */
-
- yyn = yyr1[yyn];
-
- yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
- if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
- yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
-
-/*------------------------------------.
-| yyerrlab -- here on detecting error |
-`------------------------------------*/
-yyerrlab:
- /* If not already recovering from an error, report this error. */
- if (!yyerrstatus)
- {
- ++yynerrs;
-#if ! YYERROR_VERBOSE
- yyerror (YY_("syntax error"));
-#else
- {
- YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
- if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
- {
- YYSIZE_T yyalloc = 2 * yysize;
- if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
- yyalloc = YYSTACK_ALLOC_MAXIMUM;
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
- yymsg = (char *) YYSTACK_ALLOC (yyalloc);
- if (yymsg)
- yymsg_alloc = yyalloc;
- else
- {
- yymsg = yymsgbuf;
- yymsg_alloc = sizeof yymsgbuf;
- }
- }
-
- if (0 < yysize && yysize <= yymsg_alloc)
- {
- (void) yysyntax_error (yymsg, yystate, yychar);
- yyerror (yymsg);
- }
- else
- {
- yyerror (YY_("syntax error"));
- if (yysize != 0)
- goto yyexhaustedlab;
- }
- }
-#endif
- }
-
- yyerror_range[0] = yylloc;
-
- if (yyerrstatus == 3)
- {
- /* If just tried and failed to reuse look-ahead token after an
- error, discard it. */
-
- if (yychar <= YYEOF)
- {
- /* Return failure if at end of input. */
- if (yychar == YYEOF)
- YYABORT;
- }
- else
- {
- yydestruct ("Error: discarding",
- yytoken, &yylval, &yylloc);
- yychar = YYEMPTY;
- }
- }
-
- /* Else will try to reuse look-ahead token after shifting the error
- token. */
- goto yyerrlab1;
-
-
-/*---------------------------------------------------.
-| yyerrorlab -- error raised explicitly by YYERROR. |
-`---------------------------------------------------*/
-yyerrorlab:
-
- /* Pacify compilers like GCC when the user code never invokes
- YYERROR and the label yyerrorlab therefore never appears in user
- code. */
- if (/*CONSTCOND*/ 0)
- goto yyerrorlab;
-
- yyerror_range[0] = yylsp[1-yylen];
- /* Do not reclaim the symbols of the rule which action triggered
- this YYERROR. */
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
- yystate = *yyssp;
- goto yyerrlab1;
-
-
-/*-------------------------------------------------------------.
-| yyerrlab1 -- common code for both syntax error and YYERROR. |
-`-------------------------------------------------------------*/
-yyerrlab1:
- yyerrstatus = 3; /* Each real token shifted decrements this. */
-
- for (;;)
- {
- yyn = yypact[yystate];
- if (yyn != YYPACT_NINF)
- {
- yyn += YYTERROR;
- if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
- {
- yyn = yytable[yyn];
- if (0 < yyn)
- break;
- }
- }
-
- /* Pop the current state because it cannot handle the error token. */
- if (yyssp == yyss)
- YYABORT;
-
- yyerror_range[0] = *yylsp;
- yydestruct ("Error: popping",
- yystos[yystate], yyvsp, yylsp);
- YYPOPSTACK (1);
- yystate = *yyssp;
- YY_STACK_PRINT (yyss, yyssp);
- }
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- *++yyvsp = yylval;
-
- yyerror_range[1] = yylloc;
- /* Using YYLLOC is tempting, but would change the location of
- the look-ahead. YYLOC is available though. */
- YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
- *++yylsp = yyloc;
-
- /* Shift the error token. */
- YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
-
- yystate = yyn;
- goto yynewstate;
-
-
-/*-------------------------------------.
-| yyacceptlab -- YYACCEPT comes here. |
-`-------------------------------------*/
-yyacceptlab:
- yyresult = 0;
- goto yyreturn;
-
-/*-----------------------------------.
-| yyabortlab -- YYABORT comes here. |
-`-----------------------------------*/
-yyabortlab:
- yyresult = 1;
- goto yyreturn;
-
-#ifndef yyoverflow
-/*-------------------------------------------------.
-| yyexhaustedlab -- memory exhaustion comes here. |
-`-------------------------------------------------*/
-yyexhaustedlab:
- yyerror (YY_("memory exhausted"));
- yyresult = 2;
- /* Fall through. */
-#endif
-
-yyreturn:
- if (yychar != YYEOF && yychar != YYEMPTY)
- yydestruct ("Cleanup: discarding lookahead",
- yytoken, &yylval, &yylloc);
- /* Do not reclaim the symbols of the rule which action triggered
- this YYABORT or YYACCEPT. */
- YYPOPSTACK (yylen);
- YY_STACK_PRINT (yyss, yyssp);
- while (yyssp != yyss)
- {
- yydestruct ("Cleanup: popping",
- yystos[*yyssp], yyvsp, yylsp);
- YYPOPSTACK (1);
- }
-#ifndef yyoverflow
- if (yyss != yyssa)
- YYSTACK_FREE (yyss);
-#endif
-#if YYERROR_VERBOSE
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
-#endif
- /* Make sure YYID is used. */
- return YYID (yyresult);
-}
-
-
-#line 340 "dtc-parser.y"
-
-
-void yyerrorf(char const *s, ...)
-{
- const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
- va_list va;
- va_start(va, s);
-
- if (strcmp(fname, "-") == 0)
- fname = "stdin";
-
- fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
- vfprintf(stderr, s, va);
- fprintf(stderr, "\n");
-
- treesource_error = 1;
- va_end(va);
-}
-
-void yyerror (char const *s)
-{
- yyerrorf("%s", s);
-}
-
-static unsigned long long eval_literal(const char *s, int base, int bits)
-{
- unsigned long long val;
- char *e;
-
- errno = 0;
- val = strtoull(s, &e, base);
- if (*e)
- yyerror("bad characters in literal");
- else if ((errno == ERANGE)
- || ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
- else if (errno != 0)
- yyerror("bad literal");
- return val;
-}
-
+++ /dev/null
-/* A Bison parser, made by GNU Bison 2.3. */
-
-/* Skeleton interface for Bison's Yacc-like parsers in C
-
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- DT_V1 = 258,
- DT_MEMRESERVE = 259,
- DT_PROPNODENAME = 260,
- DT_LITERAL = 261,
- DT_LEGACYLITERAL = 262,
- DT_BASE = 263,
- DT_BYTE = 264,
- DT_STRING = 265,
- DT_LABEL = 266,
- DT_REF = 267,
- DT_INCBIN = 268
- };
-#endif
-/* Tokens. */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
-
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-#line 37 "dtc-parser.y"
-{
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-/* Line 1489 of yacc.c. */
-#line 92 "dtc-parser.tab.h"
- YYSTYPE;
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-extern YYSTYPE yylval;
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
- int first_line;
- int first_column;
- int last_line;
- int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-extern YYLTYPE yylloc;
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-%locations
-
-%{
-#include <stdio.h>
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern int yylex(void);
-
-extern struct boot_info *the_boot_info;
-extern int treesource_error;
-
-static unsigned long long eval_literal(const char *s, int base, int bits);
-%}
-
-%union {
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-
-%token DT_V1
-%token DT_MEMRESERVE
-%token <propnodename> DT_PROPNODENAME
-%token <literal> DT_LITERAL
-%token <literal> DT_LEGACYLITERAL
-%token <cbase> DT_BASE
-%token <byte> DT_BYTE
-%token <data> DT_STRING
-%token <labelref> DT_LABEL
-%token <labelref> DT_REF
-%token DT_INCBIN
-
-%type <data> propdata
-%type <data> propdataprefix
-%type <re> memreserve
-%type <re> memreserves
-%type <re> v0_memreserve
-%type <re> v0_memreserves
-%type <addr> addr
-%type <data> celllist
-%type <cbase> cellbase
-%type <cell> cellval
-%type <data> bytestring
-%type <prop> propdef
-%type <proplist> proplist
-
-%type <node> devicetree
-%type <node> nodedef
-%type <node> subnode
-%type <nodelist> subnodes
-%type <labelref> label
-
-%%
-
-sourcefile:
- DT_V1 ';' memreserves devicetree
- {
- the_boot_info = build_boot_info($3, $4, 0);
- }
- | v0_memreserves devicetree
- {
- the_boot_info = build_boot_info($1, $2, 0);
- }
- ;
-
-memreserves:
- /* empty */
- {
- $$ = NULL;
- }
- | memreserve memreserves
- {
- $$ = chain_reserve_entry($1, $2);
- }
- ;
-
-memreserve:
- label DT_MEMRESERVE addr addr ';'
- {
- $$ = build_reserve_entry($3, $4, $1);
- }
- ;
-
-v0_memreserves:
- /* empty */
- {
- $$ = NULL;
- }
- | v0_memreserve v0_memreserves
- {
- $$ = chain_reserve_entry($1, $2);
- };
- ;
-
-v0_memreserve:
- memreserve
- {
- $$ = $1;
- }
- | label DT_MEMRESERVE addr '-' addr ';'
- {
- $$ = build_reserve_entry($3, $5 - $3 + 1, $1);
- }
- ;
-
-addr:
- DT_LITERAL
- {
- $$ = eval_literal($1, 0, 64);
- }
- | DT_LEGACYLITERAL
- {
- $$ = eval_literal($1, 16, 64);
- }
- ;
-
-devicetree:
- '/' nodedef
- {
- $$ = name_node($2, "", NULL);
- }
- ;
-
-nodedef:
- '{' proplist subnodes '}' ';'
- {
- $$ = build_node($2, $3);
- }
- ;
-
-proplist:
- /* empty */
- {
- $$ = NULL;
- }
- | proplist propdef
- {
- $$ = chain_property($2, $1);
- }
- ;
-
-propdef:
- label DT_PROPNODENAME '=' propdata ';'
- {
- $$ = build_property($2, $4, $1);
- }
- | label DT_PROPNODENAME ';'
- {
- $$ = build_property($2, empty_data, $1);
- }
- ;
-
-propdata:
- propdataprefix DT_STRING
- {
- $$ = data_merge($1, $2);
- }
- | propdataprefix '<' celllist '>'
- {
- $$ = data_merge($1, $3);
- }
- | propdataprefix '[' bytestring ']'
- {
- $$ = data_merge($1, $3);
- }
- | propdataprefix DT_REF
- {
- $$ = data_add_marker($1, REF_PATH, $2);
- }
- | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file($4.val, &path);
- struct data d = empty_data;
-
- if ($6 != 0)
- if (fseek(file->file, $6, SEEK_SET) != 0)
- yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
- (unsigned long long)$6,
- $4.val, strerror(errno));
-
- d = data_copy_file(file->file, $8);
-
- $$ = data_merge($1, d);
- dtc_close_file(file);
- }
- | propdataprefix DT_INCBIN '(' DT_STRING ')'
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file($4.val, &path);
- struct data d = empty_data;
-
- d = data_copy_file(file->file, -1);
-
- $$ = data_merge($1, d);
- dtc_close_file(file);
- }
- | propdata DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-propdataprefix:
- /* empty */
- {
- $$ = empty_data;
- }
- | propdata ','
- {
- $$ = $1;
- }
- | propdataprefix DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-celllist:
- /* empty */
- {
- $$ = empty_data;
- }
- | celllist cellval
- {
- $$ = data_append_cell($1, $2);
- }
- | celllist DT_REF
- {
- $$ = data_append_cell(data_add_marker($1, REF_PHANDLE,
- $2), -1);
- }
- | celllist DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-cellbase:
- /* empty */
- {
- $$ = 16;
- }
- | DT_BASE
- ;
-
-cellval:
- DT_LITERAL
- {
- $$ = eval_literal($1, 0, 32);
- }
- | cellbase DT_LEGACYLITERAL
- {
- $$ = eval_literal($2, $1, 32);
- }
- ;
-
-bytestring:
- /* empty */
- {
- $$ = empty_data;
- }
- | bytestring DT_BYTE
- {
- $$ = data_append_byte($1, $2);
- }
- | bytestring DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-subnodes:
- /* empty */
- {
- $$ = NULL;
- }
- | subnode subnodes
- {
- $$ = chain_node($1, $2);
- }
- | subnode propdef
- {
- yyerror("syntax error: properties must precede subnodes");
- YYERROR;
- }
- ;
-
-subnode:
- label DT_PROPNODENAME nodedef
- {
- $$ = name_node($3, $2, $1);
- }
- ;
-
-label:
- /* empty */
- {
- $$ = NULL;
- }
- | DT_LABEL
- {
- $$ = $1;
- }
- ;
-
-%%
-
-void yyerrorf(char const *s, ...)
-{
- const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
- va_list va;
- va_start(va, s);
-
- if (strcmp(fname, "-") == 0)
- fname = "stdin";
-
- fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
- vfprintf(stderr, s, va);
- fprintf(stderr, "\n");
-
- treesource_error = 1;
- va_end(va);
-}
-
-void yyerror (char const *s)
-{
- yyerrorf("%s", s);
-}
-
-static unsigned long long eval_literal(const char *s, int base, int bits)
-{
- unsigned long long val;
- char *e;
-
- errno = 0;
- val = strtoull(s, &e, base);
- if (*e)
- yyerror("bad characters in literal");
- else if ((errno == ERANGE)
- || ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
- else if (errno != 0)
- yyerror("bad literal");
- return val;
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-#include "version_gen.h"
-
-/*
- * Command line options
- */
-int quiet; /* Level of quietness */
-int reservenum; /* Number of memory reservation slots */
-int minsize; /* Minimum blob size */
-int padsize; /* Additional padding to blob */
-
-char *join_path(const char *path, const char *name)
-{
- int lenp = strlen(path);
- int lenn = strlen(name);
- int len;
- int needslash = 1;
- char *str;
-
- len = lenp + lenn + 2;
- if ((lenp > 0) && (path[lenp-1] == '/')) {
- needslash = 0;
- len--;
- }
-
- str = xmalloc(len);
- memcpy(str, path, lenp);
- if (needslash) {
- str[lenp] = '/';
- lenp++;
- }
- memcpy(str+lenp, name, lenn+1);
- return str;
-}
-
-static void fill_fullpaths(struct node *tree, const char *prefix)
-{
- struct node *child;
- const char *unit;
-
- tree->fullpath = join_path(prefix, tree->name);
-
- unit = strchr(tree->name, '@');
- if (unit)
- tree->basenamelen = unit - tree->name;
- else
- tree->basenamelen = strlen(tree->name);
-
- for_each_child(tree, child)
- fill_fullpaths(child, tree->fullpath);
-}
-
-static void __attribute__ ((noreturn)) usage(void)
-{
- fprintf(stderr, "Usage:\n");
- fprintf(stderr, "\tdtc [options] <input file>\n");
- fprintf(stderr, "\nOptions:\n");
- fprintf(stderr, "\t-h\n");
- fprintf(stderr, "\t\tThis help text\n");
- fprintf(stderr, "\t-q\n");
- fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n");
- fprintf(stderr, "\t-I <input format>\n");
- fprintf(stderr, "\t\tInput formats are:\n");
- fprintf(stderr, "\t\t\tdts - device tree source text\n");
- fprintf(stderr, "\t\t\tdtb - device tree blob\n");
- fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n");
- fprintf(stderr, "\t-o <output file>\n");
- fprintf(stderr, "\t-O <output format>\n");
- fprintf(stderr, "\t\tOutput formats are:\n");
- fprintf(stderr, "\t\t\tdts - device tree source text\n");
- fprintf(stderr, "\t\t\tdtb - device tree blob\n");
- fprintf(stderr, "\t\t\tasm - assembler source\n");
- fprintf(stderr, "\t-V <output version>\n");
- fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION);
- fprintf(stderr, "\t-R <number>\n");
- fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n");
- fprintf(stderr, "\t-S <bytes>\n");
- fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n");
- fprintf(stderr, "\t-p <bytes>\n");
- fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n");
- fprintf(stderr, "\t-b <number>\n");
- fprintf(stderr, "\t\tSet the physical boot cpu\n");
- fprintf(stderr, "\t-f\n");
- fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
- fprintf(stderr, "\t-v\n");
- fprintf(stderr, "\t\tPrint DTC version and exit\n");
- exit(3);
-}
-
-int main(int argc, char *argv[])
-{
- struct boot_info *bi;
- const char *inform = "dts";
- const char *outform = "dts";
- const char *outname = "-";
- int force = 0, check = 0;
- const char *arg;
- int opt;
- FILE *outf = NULL;
- int outversion = DEFAULT_FDT_VERSION;
- long long cmdline_boot_cpuid = -1;
-
- quiet = 0;
- reservenum = 0;
- minsize = 0;
- padsize = 0;
-
- while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) {
- switch (opt) {
- case 'I':
- inform = optarg;
- break;
- case 'O':
- outform = optarg;
- break;
- case 'o':
- outname = optarg;
- break;
- case 'V':
- outversion = strtol(optarg, NULL, 0);
- break;
- case 'R':
- reservenum = strtol(optarg, NULL, 0);
- break;
- case 'S':
- minsize = strtol(optarg, NULL, 0);
- break;
- case 'p':
- padsize = strtol(optarg, NULL, 0);
- break;
- case 'f':
- force = 1;
- break;
- case 'c':
- check = 1;
- break;
- case 'q':
- quiet++;
- break;
- case 'b':
- cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
- break;
- case 'v':
- printf("Version: %s\n", DTC_VERSION);
- exit(0);
- case 'h':
- default:
- usage();
- }
- }
-
- if (argc > (optind+1))
- usage();
- else if (argc < (optind+1))
- arg = "-";
- else
- arg = argv[optind];
-
- /* minsize and padsize are mutually exclusive */
- if (minsize && padsize)
- die("Can't set both -p and -S\n");
-
- fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
- inform, outform, arg);
-
- if (streq(inform, "dts"))
- bi = dt_from_source(arg);
- else if (streq(inform, "fs"))
- bi = dt_from_fs(arg);
- else if(streq(inform, "dtb"))
- bi = dt_from_blob(arg);
- else
- die("Unknown input format \"%s\"\n", inform);
-
- if (cmdline_boot_cpuid != -1)
- bi->boot_cpuid_phys = cmdline_boot_cpuid;
-
- fill_fullpaths(bi->dt, "");
- process_checks(force, bi);
-
-
- if (streq(outname, "-")) {
- outf = stdout;
- } else {
- outf = fopen(outname, "w");
- if (! outf)
- die("Couldn't open output file %s: %s\n",
- outname, strerror(errno));
- }
-
- if (streq(outform, "dts")) {
- dt_to_source(outf, bi);
- } else if (streq(outform, "dtb")) {
- dt_to_blob(outf, bi, outversion);
- } else if (streq(outform, "asm")) {
- dt_to_asm(outf, bi, outversion);
- } else if (streq(outform, "null")) {
- /* do nothing */
- } else {
- die("Unknown output format \"%s\"\n", outform);
- }
-
- exit(0);
-}
+++ /dev/null
-#ifndef _DTC_H
-#define _DTC_H
-
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <ctype.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <libfdt_env.h>
-#include <fdt.h>
-
-#define DEFAULT_FDT_VERSION 17
-/*
- * Command line options
- */
-extern int quiet; /* Level of quietness */
-extern int reservenum; /* Number of memory reservation slots */
-extern int minsize; /* Minimum blob size */
-extern int padsize; /* Additional padding to blob */
-
-static inline void __attribute__((noreturn)) die(char * str, ...)
-{
- va_list ap;
-
- va_start(ap, str);
- fprintf(stderr, "FATAL ERROR: ");
- vfprintf(stderr, str, ap);
- exit(1);
-}
-
-static inline void *xmalloc(size_t len)
-{
- void *new = malloc(len);
-
- if (! new)
- die("malloc() failed\n");
-
- return new;
-}
-
-static inline void *xrealloc(void *p, size_t len)
-{
- void *new = realloc(p, len);
-
- if (! new)
- die("realloc() failed (len=%d)\n", len);
-
- return new;
-}
-
-typedef uint32_t cell_t;
-
-
-#define streq(a, b) (strcmp((a), (b)) == 0)
-#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0)
-
-#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/* Data blobs */
-enum markertype {
- REF_PHANDLE,
- REF_PATH,
- LABEL,
-};
-
-struct marker {
- enum markertype type;
- int offset;
- char *ref;
- struct marker *next;
-};
-
-struct data {
- int len;
- char *val;
- struct marker *markers;
-};
-
-
-#define empty_data ((struct data){ /* all .members = 0 or NULL */ })
-
-#define for_each_marker(m) \
- for (; (m); (m) = (m)->next)
-#define for_each_marker_of_type(m, t) \
- for_each_marker(m) \
- if ((m)->type == (t))
-
-void data_free(struct data d);
-
-struct data data_grow_for(struct data d, int xlen);
-
-struct data data_copy_mem(const char *mem, int len);
-struct data data_copy_escape_string(const char *s, int len);
-struct data data_copy_file(FILE *f, size_t len);
-
-struct data data_append_data(struct data d, const void *p, int len);
-struct data data_insert_at_marker(struct data d, struct marker *m,
- const void *p, int len);
-struct data data_merge(struct data d1, struct data d2);
-struct data data_append_cell(struct data d, cell_t word);
-struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
-struct data data_append_addr(struct data d, uint64_t addr);
-struct data data_append_byte(struct data d, uint8_t byte);
-struct data data_append_zeroes(struct data d, int len);
-struct data data_append_align(struct data d, int align);
-
-struct data data_add_marker(struct data d, enum markertype type, char *ref);
-
-int data_is_one_string(struct data d);
-
-/* DT constraints */
-
-#define MAX_PROPNAME_LEN 31
-#define MAX_NODENAME_LEN 31
-
-/* Live trees */
-struct property {
- char *name;
- struct data val;
-
- struct property *next;
-
- char *label;
-};
-
-struct node {
- char *name;
- struct property *proplist;
- struct node *children;
-
- struct node *parent;
- struct node *next_sibling;
-
- char *fullpath;
- int basenamelen;
-
- cell_t phandle;
- int addr_cells, size_cells;
-
- char *label;
-};
-
-#define for_each_property(n, p) \
- for ((p) = (n)->proplist; (p); (p) = (p)->next)
-
-#define for_each_child(n, c) \
- for ((c) = (n)->children; (c); (c) = (c)->next_sibling)
-
-struct property *build_property(char *name, struct data val, char *label);
-struct property *chain_property(struct property *first, struct property *list);
-struct property *reverse_properties(struct property *first);
-
-struct node *build_node(struct property *proplist, struct node *children);
-struct node *name_node(struct node *node, char *name, char *label);
-struct node *chain_node(struct node *first, struct node *list);
-
-void add_property(struct node *node, struct property *prop);
-void add_child(struct node *parent, struct node *child);
-
-const char *get_unitname(struct node *node);
-struct property *get_property(struct node *node, const char *propname);
-cell_t propval_cell(struct property *prop);
-struct node *get_subnode(struct node *node, const char *nodename);
-struct node *get_node_by_path(struct node *tree, const char *path);
-struct node *get_node_by_label(struct node *tree, const char *label);
-struct node *get_node_by_phandle(struct node *tree, cell_t phandle);
-struct node *get_node_by_ref(struct node *tree, const char *ref);
-cell_t get_node_phandle(struct node *root, struct node *node);
-
-/* Boot info (tree plus memreserve information */
-
-struct reserve_info {
- struct fdt_reserve_entry re;
-
- struct reserve_info *next;
-
- char *label;
-};
-
-struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
-struct reserve_info *chain_reserve_entry(struct reserve_info *first,
- struct reserve_info *list);
-struct reserve_info *add_reserve_entry(struct reserve_info *list,
- struct reserve_info *new);
-
-
-struct boot_info {
- struct reserve_info *reservelist;
- struct node *dt; /* the device tree */
- uint32_t boot_cpuid_phys;
-};
-
-struct boot_info *build_boot_info(struct reserve_info *reservelist,
- struct node *tree, uint32_t boot_cpuid_phys);
-
-/* Checks */
-
-void process_checks(int force, struct boot_info *bi);
-
-/* Flattened trees */
-
-void dt_to_blob(FILE *f, struct boot_info *bi, int version);
-void dt_to_asm(FILE *f, struct boot_info *bi, int version);
-
-struct boot_info *dt_from_blob(const char *fname);
-
-/* Tree source */
-
-void dt_to_source(FILE *f, struct boot_info *bi);
-struct boot_info *dt_from_source(const char *f);
-
-/* FS trees */
-
-struct boot_info *dt_from_fs(const char *dirname);
-
-/* misc */
-
-char *join_path(const char *path, const char *name);
-
-#endif /* _DTC_H */
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-#define FTF_FULLPATH 0x1
-#define FTF_VARALIGN 0x2
-#define FTF_NAMEPROPS 0x4
-#define FTF_BOOTCPUID 0x8
-#define FTF_STRTABSIZE 0x10
-#define FTF_STRUCTSIZE 0x20
-#define FTF_NOPS 0x40
-
-static struct version_info {
- int version;
- int last_comp_version;
- int hdr_size;
- int flags;
-} version_table[] = {
- {1, 1, FDT_V1_SIZE,
- FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS},
- {2, 1, FDT_V2_SIZE,
- FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID},
- {3, 1, FDT_V3_SIZE,
- FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE},
- {16, 16, FDT_V3_SIZE,
- FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS},
- {17, 16, FDT_V17_SIZE,
- FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS},
-};
-
-struct emitter {
- void (*cell)(void *, cell_t);
- void (*string)(void *, char *, int);
- void (*align)(void *, int);
- void (*data)(void *, struct data);
- void (*beginnode)(void *, const char *);
- void (*endnode)(void *, const char *);
- void (*property)(void *, const char *);
-};
-
-static void bin_emit_cell(void *e, cell_t val)
-{
- struct data *dtbuf = e;
-
- *dtbuf = data_append_cell(*dtbuf, val);
-}
-
-static void bin_emit_string(void *e, char *str, int len)
-{
- struct data *dtbuf = e;
-
- if (len == 0)
- len = strlen(str);
-
- *dtbuf = data_append_data(*dtbuf, str, len);
- *dtbuf = data_append_byte(*dtbuf, '\0');
-}
-
-static void bin_emit_align(void *e, int a)
-{
- struct data *dtbuf = e;
-
- *dtbuf = data_append_align(*dtbuf, a);
-}
-
-static void bin_emit_data(void *e, struct data d)
-{
- struct data *dtbuf = e;
-
- *dtbuf = data_append_data(*dtbuf, d.val, d.len);
-}
-
-static void bin_emit_beginnode(void *e, const char *label)
-{
- bin_emit_cell(e, FDT_BEGIN_NODE);
-}
-
-static void bin_emit_endnode(void *e, const char *label)
-{
- bin_emit_cell(e, FDT_END_NODE);
-}
-
-static void bin_emit_property(void *e, const char *label)
-{
- bin_emit_cell(e, FDT_PROP);
-}
-
-static struct emitter bin_emitter = {
- .cell = bin_emit_cell,
- .string = bin_emit_string,
- .align = bin_emit_align,
- .data = bin_emit_data,
- .beginnode = bin_emit_beginnode,
- .endnode = bin_emit_endnode,
- .property = bin_emit_property,
-};
-
-static void emit_label(FILE *f, const char *prefix, const char *label)
-{
- fprintf(f, "\t.globl\t%s_%s\n", prefix, label);
- fprintf(f, "%s_%s:\n", prefix, label);
- fprintf(f, "_%s_%s:\n", prefix, label);
-}
-
-static void emit_offset_label(FILE *f, const char *label, int offset)
-{
- fprintf(f, "\t.globl\t%s\n", label);
- fprintf(f, "%s\t= . + %d\n", label, offset);
-}
-
-static void asm_emit_cell(void *e, cell_t val)
-{
- FILE *f = e;
-
- fprintf(f, "\t.long\t0x%x\n", val);
-}
-
-static void asm_emit_string(void *e, char *str, int len)
-{
- FILE *f = e;
- char c = 0;
-
- if (len != 0) {
- /* XXX: ewww */
- c = str[len];
- str[len] = '\0';
- }
-
- fprintf(f, "\t.string\t\"%s\"\n", str);
-
- if (len != 0) {
- str[len] = c;
- }
-}
-
-static void asm_emit_align(void *e, int a)
-{
- FILE *f = e;
-
- fprintf(f, "\t.balign\t%d\n", a);
-}
-
-static void asm_emit_data(void *e, struct data d)
-{
- FILE *f = e;
- int off = 0;
- struct marker *m = d.markers;
-
- for_each_marker_of_type(m, LABEL)
- emit_offset_label(f, m->ref, m->offset);
-
- while ((d.len - off) >= sizeof(uint32_t)) {
- fprintf(f, "\t.long\t0x%x\n",
- fdt32_to_cpu(*((uint32_t *)(d.val+off))));
- off += sizeof(uint32_t);
- }
-
- while ((d.len - off) >= 1) {
- fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
- off += 1;
- }
-
- assert(off == d.len);
-}
-
-static void asm_emit_beginnode(void *e, const char *label)
-{
- FILE *f = e;
-
- if (label) {
- fprintf(f, "\t.globl\t%s\n", label);
- fprintf(f, "%s:\n", label);
- }
- fprintf(f, "\t.long\tFDT_BEGIN_NODE\n");
-}
-
-static void asm_emit_endnode(void *e, const char *label)
-{
- FILE *f = e;
-
- fprintf(f, "\t.long\tFDT_END_NODE\n");
- if (label) {
- fprintf(f, "\t.globl\t%s_end\n", label);
- fprintf(f, "%s_end:\n", label);
- }
-}
-
-static void asm_emit_property(void *e, const char *label)
-{
- FILE *f = e;
-
- if (label) {
- fprintf(f, "\t.globl\t%s\n", label);
- fprintf(f, "%s:\n", label);
- }
- fprintf(f, "\t.long\tFDT_PROP\n");
-}
-
-static struct emitter asm_emitter = {
- .cell = asm_emit_cell,
- .string = asm_emit_string,
- .align = asm_emit_align,
- .data = asm_emit_data,
- .beginnode = asm_emit_beginnode,
- .endnode = asm_emit_endnode,
- .property = asm_emit_property,
-};
-
-static int stringtable_insert(struct data *d, const char *str)
-{
- int i;
-
- /* FIXME: do this more efficiently? */
-
- for (i = 0; i < d->len; i++) {
- if (streq(str, d->val + i))
- return i;
- }
-
- *d = data_append_data(*d, str, strlen(str)+1);
- return i;
-}
-
-static void flatten_tree(struct node *tree, struct emitter *emit,
- void *etarget, struct data *strbuf,
- struct version_info *vi)
-{
- struct property *prop;
- struct node *child;
- int seen_name_prop = 0;
-
- emit->beginnode(etarget, tree->label);
-
- if (vi->flags & FTF_FULLPATH)
- emit->string(etarget, tree->fullpath, 0);
- else
- emit->string(etarget, tree->name, 0);
-
- emit->align(etarget, sizeof(cell_t));
-
- for_each_property(tree, prop) {
- int nameoff;
-
- if (streq(prop->name, "name"))
- seen_name_prop = 1;
-
- nameoff = stringtable_insert(strbuf, prop->name);
-
- emit->property(etarget, prop->label);
- emit->cell(etarget, prop->val.len);
- emit->cell(etarget, nameoff);
-
- if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8))
- emit->align(etarget, 8);
-
- emit->data(etarget, prop->val);
- emit->align(etarget, sizeof(cell_t));
- }
-
- if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) {
- emit->property(etarget, NULL);
- emit->cell(etarget, tree->basenamelen+1);
- emit->cell(etarget, stringtable_insert(strbuf, "name"));
-
- if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8))
- emit->align(etarget, 8);
-
- emit->string(etarget, tree->name, tree->basenamelen);
- emit->align(etarget, sizeof(cell_t));
- }
-
- for_each_child(tree, child) {
- flatten_tree(child, emit, etarget, strbuf, vi);
- }
-
- emit->endnode(etarget, tree->label);
-}
-
-static struct data flatten_reserve_list(struct reserve_info *reservelist,
- struct version_info *vi)
-{
- struct reserve_info *re;
- struct data d = empty_data;
- static struct fdt_reserve_entry null_re = {0,0};
- int j;
-
- for (re = reservelist; re; re = re->next) {
- d = data_append_re(d, &re->re);
- }
- /*
- * Add additional reserved slots if the user asked for them.
- */
- for (j = 0; j < reservenum; j++) {
- d = data_append_re(d, &null_re);
- }
-
- return d;
-}
-
-static void make_fdt_header(struct fdt_header *fdt,
- struct version_info *vi,
- int reservesize, int dtsize, int strsize,
- int boot_cpuid_phys)
-{
- int reserve_off;
-
- reservesize += sizeof(struct fdt_reserve_entry);
-
- memset(fdt, 0xff, sizeof(*fdt));
-
- fdt->magic = cpu_to_fdt32(FDT_MAGIC);
- fdt->version = cpu_to_fdt32(vi->version);
- fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version);
-
- /* Reserve map should be doubleword aligned */
- reserve_off = ALIGN(vi->hdr_size, 8);
-
- fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off);
- fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize);
- fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize
- + dtsize);
- fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize);
-
- if (vi->flags & FTF_BOOTCPUID)
- fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys);
- if (vi->flags & FTF_STRTABSIZE)
- fdt->size_dt_strings = cpu_to_fdt32(strsize);
- if (vi->flags & FTF_STRUCTSIZE)
- fdt->size_dt_struct = cpu_to_fdt32(dtsize);
-}
-
-void dt_to_blob(FILE *f, struct boot_info *bi, int version)
-{
- struct version_info *vi = NULL;
- int i;
- struct data blob = empty_data;
- struct data reservebuf = empty_data;
- struct data dtbuf = empty_data;
- struct data strbuf = empty_data;
- struct fdt_header fdt;
- int padlen = 0;
-
- for (i = 0; i < ARRAY_SIZE(version_table); i++) {
- if (version_table[i].version == version)
- vi = &version_table[i];
- }
- if (!vi)
- die("Unknown device tree blob version %d\n", version);
-
- flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi);
- bin_emit_cell(&dtbuf, FDT_END);
-
- reservebuf = flatten_reserve_list(bi->reservelist, vi);
-
- /* Make header */
- make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
- bi->boot_cpuid_phys);
-
- /*
- * If the user asked for more space than is used, adjust the totalsize.
- */
- if (minsize > 0) {
- padlen = minsize - fdt32_to_cpu(fdt.totalsize);
- if ((padlen < 0) && (quiet < 1))
- fprintf(stderr,
- "Warning: blob size %d >= minimum size %d\n",
- fdt32_to_cpu(fdt.totalsize), minsize);
- }
-
- if (padsize > 0)
- padlen = padsize;
-
- if (padlen > 0) {
- int tsize = fdt32_to_cpu(fdt.totalsize);
- tsize += padlen;
- fdt.totalsize = cpu_to_fdt32(tsize);
- }
-
- /*
- * Assemble the blob: start with the header, add with alignment
- * the reserve buffer, add the reserve map terminating zeroes,
- * the device tree itself, and finally the strings.
- */
- blob = data_append_data(blob, &fdt, vi->hdr_size);
- blob = data_append_align(blob, 8);
- blob = data_merge(blob, reservebuf);
- blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
- blob = data_merge(blob, dtbuf);
- blob = data_merge(blob, strbuf);
-
- /*
- * If the user asked for more space than is used, pad out the blob.
- */
- if (padlen > 0)
- blob = data_append_zeroes(blob, padlen);
-
- fwrite(blob.val, blob.len, 1, f);
-
- if (ferror(f))
- die("Error writing device tree blob: %s\n", strerror(errno));
-
- /*
- * data_merge() frees the right-hand element so only the blob
- * remains to be freed.
- */
- data_free(blob);
-}
-
-static void dump_stringtable_asm(FILE *f, struct data strbuf)
-{
- const char *p;
- int len;
-
- p = strbuf.val;
-
- while (p < (strbuf.val + strbuf.len)) {
- len = strlen(p);
- fprintf(f, "\t.string \"%s\"\n", p);
- p += len+1;
- }
-}
-
-void dt_to_asm(FILE *f, struct boot_info *bi, int version)
-{
- struct version_info *vi = NULL;
- int i;
- struct data strbuf = empty_data;
- struct reserve_info *re;
- const char *symprefix = "dt";
-
- for (i = 0; i < ARRAY_SIZE(version_table); i++) {
- if (version_table[i].version == version)
- vi = &version_table[i];
- }
- if (!vi)
- die("Unknown device tree blob version %d\n", version);
-
- fprintf(f, "/* autogenerated by dtc, do not edit */\n\n");
- fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC);
- fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE);
- fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE);
- fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP);
- fprintf(f, "#define FDT_END 0x%x\n", FDT_END);
- fprintf(f, "\n");
-
- emit_label(f, symprefix, "blob_start");
- emit_label(f, symprefix, "header");
- fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n");
- fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version);
- fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n",
- vi->last_comp_version);
-
- if (vi->flags & FTF_BOOTCPUID)
- fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
- bi->boot_cpuid_phys);
-
- if (vi->flags & FTF_STRTABSIZE)
- fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
- symprefix, symprefix);
-
- if (vi->flags & FTF_STRUCTSIZE)
- fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n",
- symprefix, symprefix);
-
- /*
- * Reserve map entries.
- * Align the reserve map to a doubleword boundary.
- * Each entry is an (address, size) pair of u64 values.
- * Always supply a zero-sized temination entry.
- */
- asm_emit_align(f, 8);
- emit_label(f, symprefix, "reserve_map");
-
- fprintf(f, "/* Memory reserve map from source file */\n");
-
- /*
- * Use .long on high and low halfs of u64s to avoid .quad
- * as it appears .quad isn't available in some assemblers.
- */
- for (re = bi->reservelist; re; re = re->next) {
- if (re->label) {
- fprintf(f, "\t.globl\t%s\n", re->label);
- fprintf(f, "%s:\n", re->label);
- }
- fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
- (unsigned int)(re->re.address >> 32),
- (unsigned int)(re->re.address & 0xffffffff));
- fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
- (unsigned int)(re->re.size >> 32),
- (unsigned int)(re->re.size & 0xffffffff));
- }
- for (i = 0; i < reservenum; i++) {
- fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
- }
-
- fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
-
- emit_label(f, symprefix, "struct_start");
- flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi);
- fprintf(f, "\t.long\tFDT_END\n");
- emit_label(f, symprefix, "struct_end");
-
- emit_label(f, symprefix, "strings_start");
- dump_stringtable_asm(f, strbuf);
- emit_label(f, symprefix, "strings_end");
-
- emit_label(f, symprefix, "blob_end");
-
- /*
- * If the user asked for more space than is used, pad it out.
- */
- if (minsize > 0) {
- fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n",
- minsize, symprefix, symprefix);
- }
- if (padsize > 0) {
- fprintf(f, "\t.space\t%d, 0\n", padsize);
- }
- emit_label(f, symprefix, "blob_abs_end");
-
- data_free(strbuf);
-}
-
-struct inbuf {
- char *base, *limit, *ptr;
-};
-
-static void inbuf_init(struct inbuf *inb, void *base, void *limit)
-{
- inb->base = base;
- inb->limit = limit;
- inb->ptr = inb->base;
-}
-
-static void flat_read_chunk(struct inbuf *inb, void *p, int len)
-{
- if ((inb->ptr + len) > inb->limit)
- die("Premature end of data parsing flat device tree\n");
-
- memcpy(p, inb->ptr, len);
-
- inb->ptr += len;
-}
-
-static uint32_t flat_read_word(struct inbuf *inb)
-{
- uint32_t val;
-
- assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
-
- flat_read_chunk(inb, &val, sizeof(val));
-
- return fdt32_to_cpu(val);
-}
-
-static void flat_realign(struct inbuf *inb, int align)
-{
- int off = inb->ptr - inb->base;
-
- inb->ptr = inb->base + ALIGN(off, align);
- if (inb->ptr > inb->limit)
- die("Premature end of data parsing flat device tree\n");
-}
-
-static char *flat_read_string(struct inbuf *inb)
-{
- int len = 0;
- const char *p = inb->ptr;
- char *str;
-
- do {
- if (p >= inb->limit)
- die("Premature end of data parsing flat device tree\n");
- len++;
- } while ((*p++) != '\0');
-
- str = strdup(inb->ptr);
-
- inb->ptr += len;
-
- flat_realign(inb, sizeof(uint32_t));
-
- return str;
-}
-
-static struct data flat_read_data(struct inbuf *inb, int len)
-{
- struct data d = empty_data;
-
- if (len == 0)
- return empty_data;
-
- d = data_grow_for(d, len);
- d.len = len;
-
- flat_read_chunk(inb, d.val, len);
-
- flat_realign(inb, sizeof(uint32_t));
-
- return d;
-}
-
-static char *flat_read_stringtable(struct inbuf *inb, int offset)
-{
- const char *p;
-
- p = inb->base + offset;
- while (1) {
- if (p >= inb->limit || p < inb->base)
- die("String offset %d overruns string table\n",
- offset);
-
- if (*p == '\0')
- break;
-
- p++;
- }
-
- return strdup(inb->base + offset);
-}
-
-static struct property *flat_read_property(struct inbuf *dtbuf,
- struct inbuf *strbuf, int flags)
-{
- uint32_t proplen, stroff;
- char *name;
- struct data val;
-
- proplen = flat_read_word(dtbuf);
- stroff = flat_read_word(dtbuf);
-
- name = flat_read_stringtable(strbuf, stroff);
-
- if ((flags & FTF_VARALIGN) && (proplen >= 8))
- flat_realign(dtbuf, 8);
-
- val = flat_read_data(dtbuf, proplen);
-
- return build_property(name, val, NULL);
-}
-
-
-static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
-{
- struct reserve_info *reservelist = NULL;
- struct reserve_info *new;
- const char *p;
- struct fdt_reserve_entry re;
-
- /*
- * Each entry is a pair of u64 (addr, size) values for 4 cell_t's.
- * List terminates at an entry with size equal to zero.
- *
- * First pass, count entries.
- */
- p = inb->ptr;
- while (1) {
- flat_read_chunk(inb, &re, sizeof(re));
- re.address = fdt64_to_cpu(re.address);
- re.size = fdt64_to_cpu(re.size);
- if (re.size == 0)
- break;
-
- new = build_reserve_entry(re.address, re.size, NULL);
- reservelist = add_reserve_entry(reservelist, new);
- }
-
- return reservelist;
-}
-
-
-static char *nodename_from_path(const char *ppath, const char *cpath)
-{
- int plen;
-
- plen = strlen(ppath);
-
- if (!strneq(ppath, cpath, plen))
- die("Path \"%s\" is not valid as a child of \"%s\"\n",
- cpath, ppath);
-
- /* root node is a special case */
- if (!streq(ppath, "/"))
- plen++;
-
- return strdup(cpath + plen);
-}
-
-static struct node *unflatten_tree(struct inbuf *dtbuf,
- struct inbuf *strbuf,
- const char *parent_flatname, int flags)
-{
- struct node *node;
- char *flatname;
- uint32_t val;
-
- node = build_node(NULL, NULL);
-
- flatname = flat_read_string(dtbuf);
-
- if (flags & FTF_FULLPATH)
- node->name = nodename_from_path(parent_flatname, flatname);
- else
- node->name = flatname;
-
- do {
- struct property *prop;
- struct node *child;
-
- val = flat_read_word(dtbuf);
- switch (val) {
- case FDT_PROP:
- if (node->children)
- fprintf(stderr, "Warning: Flat tree input has "
- "subnodes preceding a property.\n");
- prop = flat_read_property(dtbuf, strbuf, flags);
- add_property(node, prop);
- break;
-
- case FDT_BEGIN_NODE:
- child = unflatten_tree(dtbuf,strbuf, flatname, flags);
- add_child(node, child);
- break;
-
- case FDT_END_NODE:
- break;
-
- case FDT_END:
- die("Premature FDT_END in device tree blob\n");
- break;
-
- case FDT_NOP:
- if (!(flags & FTF_NOPS))
- fprintf(stderr, "Warning: NOP tag found in flat tree"
- " version <16\n");
-
- /* Ignore */
- break;
-
- default:
- die("Invalid opcode word %08x in device tree blob\n",
- val);
- }
- } while (val != FDT_END_NODE);
-
- return node;
-}
-
-
-struct boot_info *dt_from_blob(const char *fname)
-{
- struct dtc_file *dtcf;
- uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
- uint32_t off_dt, off_str, off_mem_rsvmap;
- int rc;
- char *blob;
- struct fdt_header *fdt;
- char *p;
- struct inbuf dtbuf, strbuf;
- struct inbuf memresvbuf;
- int sizeleft;
- struct reserve_info *reservelist;
- struct node *tree;
- uint32_t val;
- int flags = 0;
-
- dtcf = dtc_open_file(fname, NULL);
-
- rc = fread(&magic, sizeof(magic), 1, dtcf->file);
- if (ferror(dtcf->file))
- die("Error reading DT blob magic number: %s\n",
- strerror(errno));
- if (rc < 1) {
- if (feof(dtcf->file))
- die("EOF reading DT blob magic number\n");
- else
- die("Mysterious short read reading magic number\n");
- }
-
- magic = fdt32_to_cpu(magic);
- if (magic != FDT_MAGIC)
- die("Blob has incorrect magic number\n");
-
- rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file);
- if (ferror(dtcf->file))
- die("Error reading DT blob size: %s\n", strerror(errno));
- if (rc < 1) {
- if (feof(dtcf->file))
- die("EOF reading DT blob size\n");
- else
- die("Mysterious short read reading blob size\n");
- }
-
- totalsize = fdt32_to_cpu(totalsize);
- if (totalsize < FDT_V1_SIZE)
- die("DT blob size (%d) is too small\n", totalsize);
-
- blob = xmalloc(totalsize);
-
- fdt = (struct fdt_header *)blob;
- fdt->magic = cpu_to_fdt32(magic);
- fdt->totalsize = cpu_to_fdt32(totalsize);
-
- sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
- p = blob + sizeof(magic) + sizeof(totalsize);
-
- while (sizeleft) {
- if (feof(dtcf->file))
- die("EOF before reading %d bytes of DT blob\n",
- totalsize);
-
- rc = fread(p, 1, sizeleft, dtcf->file);
- if (ferror(dtcf->file))
- die("Error reading DT blob: %s\n",
- strerror(errno));
-
- sizeleft -= rc;
- p += rc;
- }
-
- off_dt = fdt32_to_cpu(fdt->off_dt_struct);
- off_str = fdt32_to_cpu(fdt->off_dt_strings);
- off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap);
- version = fdt32_to_cpu(fdt->version);
- boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys);
-
- if (off_mem_rsvmap >= totalsize)
- die("Mem Reserve structure offset exceeds total size\n");
-
- if (off_dt >= totalsize)
- die("DT structure offset exceeds total size\n");
-
- if (off_str > totalsize)
- die("String table offset exceeds total size\n");
-
- if (version >= 3) {
- uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings);
- if (off_str+size_str > totalsize)
- die("String table extends past total size\n");
- inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
- } else {
- inbuf_init(&strbuf, blob + off_str, blob + totalsize);
- }
-
- if (version >= 17) {
- size_dt = fdt32_to_cpu(fdt->size_dt_struct);
- if (off_dt+size_dt > totalsize)
- die("Structure block extends past total size\n");
- }
-
- if (version < 16) {
- flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN;
- } else {
- flags |= FTF_NOPS;
- }
-
- inbuf_init(&memresvbuf,
- blob + off_mem_rsvmap, blob + totalsize);
- inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
-
- reservelist = flat_read_mem_reserve(&memresvbuf);
-
- val = flat_read_word(&dtbuf);
-
- if (val != FDT_BEGIN_NODE)
- die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val);
-
- tree = unflatten_tree(&dtbuf, &strbuf, "", flags);
-
- val = flat_read_word(&dtbuf);
- if (val != FDT_END)
- die("Device tree blob doesn't end with FDT_END\n");
-
- free(blob);
-
- dtc_close_file(dtcf);
-
- return build_boot_info(reservelist, tree, boot_cpuid_phys);
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-#include <dirent.h>
-#include <sys/stat.h>
-
-static struct node *read_fstree(const char *dirname)
-{
- DIR *d;
- struct dirent *de;
- struct stat st;
- struct node *tree;
-
- d = opendir(dirname);
- if (!d)
- die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
-
- tree = build_node(NULL, NULL);
-
- while ((de = readdir(d)) != NULL) {
- char *tmpnam;
-
- if (streq(de->d_name, ".")
- || streq(de->d_name, ".."))
- continue;
-
- tmpnam = join_path(dirname, de->d_name);
-
- if (lstat(tmpnam, &st) < 0)
- die("stat(%s): %s\n", tmpnam, strerror(errno));
-
- if (S_ISREG(st.st_mode)) {
- struct property *prop;
- FILE *pfile;
-
- pfile = fopen(tmpnam, "r");
- if (! pfile) {
- fprintf(stderr,
- "WARNING: Cannot open %s: %s\n",
- tmpnam, strerror(errno));
- } else {
- prop = build_property(strdup(de->d_name),
- data_copy_file(pfile,
- st.st_size),
- NULL);
- add_property(tree, prop);
- fclose(pfile);
- }
- } else if (S_ISDIR(st.st_mode)) {
- struct node *newchild;
-
- newchild = read_fstree(tmpnam);
- newchild = name_node(newchild, strdup(de->d_name),
- NULL);
- add_child(tree, newchild);
- }
-
- free(tmpnam);
- }
-
- return tree;
-}
-
-struct boot_info *dt_from_fs(const char *dirname)
-{
- struct node *tree;
-
- tree = read_fstree(dirname);
- tree = name_node(tree, "", NULL);
-
- return build_boot_info(NULL, tree, 0);
-}
-
+++ /dev/null
-#ifndef _LIBFDT_ENV_H
-#define _LIBFDT_ENV_H
-
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-
-#define _B(n) ((unsigned long long)((uint8_t *)&x)[n])
-static inline uint32_t fdt32_to_cpu(uint32_t x)
-{
- return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
-}
-#define cpu_to_fdt32(x) fdt32_to_cpu(x)
-
-static inline uint64_t fdt64_to_cpu(uint64_t x)
-{
- return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
- | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
-}
-#define cpu_to_fdt64(x) fdt64_to_cpu(x)
-#undef _B
-
-#endif /* _LIBFDT_ENV_H */
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-/*
- * Tree building functions
- */
-
-struct property *build_property(char *name, struct data val, char *label)
-{
- struct property *new = xmalloc(sizeof(*new));
-
- new->name = name;
- new->val = val;
-
- new->next = NULL;
-
- new->label = label;
-
- return new;
-}
-
-struct property *chain_property(struct property *first, struct property *list)
-{
- assert(first->next == NULL);
-
- first->next = list;
- return first;
-}
-
-struct property *reverse_properties(struct property *first)
-{
- struct property *p = first;
- struct property *head = NULL;
- struct property *next;
-
- while (p) {
- next = p->next;
- p->next = head;
- head = p;
- p = next;
- }
- return head;
-}
-
-struct node *build_node(struct property *proplist, struct node *children)
-{
- struct node *new = xmalloc(sizeof(*new));
- struct node *child;
-
- memset(new, 0, sizeof(*new));
-
- new->proplist = reverse_properties(proplist);
- new->children = children;
-
- for_each_child(new, child) {
- child->parent = new;
- }
-
- return new;
-}
-
-struct node *name_node(struct node *node, char *name, char * label)
-{
- assert(node->name == NULL);
-
- node->name = name;
-
- node->label = label;
-
- return node;
-}
-
-struct node *chain_node(struct node *first, struct node *list)
-{
- assert(first->next_sibling == NULL);
-
- first->next_sibling = list;
- return first;
-}
-
-void add_property(struct node *node, struct property *prop)
-{
- struct property **p;
-
- prop->next = NULL;
-
- p = &node->proplist;
- while (*p)
- p = &((*p)->next);
-
- *p = prop;
-}
-
-void add_child(struct node *parent, struct node *child)
-{
- struct node **p;
-
- child->next_sibling = NULL;
- child->parent = parent;
-
- p = &parent->children;
- while (*p)
- p = &((*p)->next_sibling);
-
- *p = child;
-}
-
-struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
- char *label)
-{
- struct reserve_info *new = xmalloc(sizeof(*new));
-
- new->re.address = address;
- new->re.size = size;
-
- new->next = NULL;
-
- new->label = label;
-
- return new;
-}
-
-struct reserve_info *chain_reserve_entry(struct reserve_info *first,
- struct reserve_info *list)
-{
- assert(first->next == NULL);
-
- first->next = list;
- return first;
-}
-
-struct reserve_info *add_reserve_entry(struct reserve_info *list,
- struct reserve_info *new)
-{
- struct reserve_info *last;
-
- new->next = NULL;
-
- if (! list)
- return new;
-
- for (last = list; last->next; last = last->next)
- ;
-
- last->next = new;
-
- return list;
-}
-
-struct boot_info *build_boot_info(struct reserve_info *reservelist,
- struct node *tree, uint32_t boot_cpuid_phys)
-{
- struct boot_info *bi;
-
- bi = xmalloc(sizeof(*bi));
- bi->reservelist = reservelist;
- bi->dt = tree;
- bi->boot_cpuid_phys = boot_cpuid_phys;
-
- return bi;
-}
-
-/*
- * Tree accessor functions
- */
-
-const char *get_unitname(struct node *node)
-{
- if (node->name[node->basenamelen] == '\0')
- return "";
- else
- return node->name + node->basenamelen + 1;
-}
-
-struct property *get_property(struct node *node, const char *propname)
-{
- struct property *prop;
-
- for_each_property(node, prop)
- if (streq(prop->name, propname))
- return prop;
-
- return NULL;
-}
-
-cell_t propval_cell(struct property *prop)
-{
- assert(prop->val.len == sizeof(cell_t));
- return fdt32_to_cpu(*((cell_t *)prop->val.val));
-}
-
-struct node *get_subnode(struct node *node, const char *nodename)
-{
- struct node *child;
-
- for_each_child(node, child)
- if (streq(child->name, nodename))
- return child;
-
- return NULL;
-}
-
-struct node *get_node_by_path(struct node *tree, const char *path)
-{
- const char *p;
- struct node *child;
-
- if (!path || ! (*path))
- return tree;
-
- while (path[0] == '/')
- path++;
-
- p = strchr(path, '/');
-
- for_each_child(tree, child) {
- if (p && strneq(path, child->name, p-path))
- return get_node_by_path(child, p+1);
- else if (!p && streq(path, child->name))
- return child;
- }
-
- return NULL;
-}
-
-struct node *get_node_by_label(struct node *tree, const char *label)
-{
- struct node *child, *node;
-
- assert(label && (strlen(label) > 0));
-
- if (tree->label && streq(tree->label, label))
- return tree;
-
- for_each_child(tree, child) {
- node = get_node_by_label(child, label);
- if (node)
- return node;
- }
-
- return NULL;
-}
-
-struct node *get_node_by_phandle(struct node *tree, cell_t phandle)
-{
- struct node *child, *node;
-
- assert((phandle != 0) && (phandle != -1));
-
- if (tree->phandle == phandle)
- return tree;
-
- for_each_child(tree, child) {
- node = get_node_by_phandle(child, phandle);
- if (node)
- return node;
- }
-
- return NULL;
-}
-
-struct node *get_node_by_ref(struct node *tree, const char *ref)
-{
- if (ref[0] == '/')
- return get_node_by_path(tree, ref);
- else
- return get_node_by_label(tree, ref);
-}
-
-cell_t get_node_phandle(struct node *root, struct node *node)
-{
- static cell_t phandle = 1; /* FIXME: ick, static local */
-
- if ((node->phandle != 0) && (node->phandle != -1))
- return node->phandle;
-
- assert(! get_property(node, "linux,phandle"));
-
- while (get_node_by_phandle(root, phandle))
- phandle++;
-
- node->phandle = phandle;
- add_property(node,
- build_property("linux,phandle",
- data_append_cell(empty_data, phandle),
- NULL));
-
- return node->phandle;
-}
+++ /dev/null
-/*
- * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-/*
- * Like yylineno, this is the current open file pos.
- */
-
-struct dtc_file *srcpos_file;
-
-static int dtc_open_one(struct dtc_file *file,
- const char *search,
- const char *fname)
-{
- char *fullname;
-
- if (search) {
- fullname = xmalloc(strlen(search) + strlen(fname) + 2);
-
- strcpy(fullname, search);
- strcat(fullname, "/");
- strcat(fullname, fname);
- } else {
- fullname = strdup(fname);
- }
-
- file->file = fopen(fullname, "r");
- if (!file->file) {
- free(fullname);
- return 0;
- }
-
- file->name = fullname;
- return 1;
-}
-
-
-struct dtc_file *dtc_open_file(const char *fname,
- const struct search_path *search)
-{
- static const struct search_path default_search = { NULL, NULL, NULL };
-
- struct dtc_file *file;
- const char *slash;
-
- file = xmalloc(sizeof(struct dtc_file));
-
- slash = strrchr(fname, '/');
- if (slash) {
- char *dir = xmalloc(slash - fname + 1);
-
- memcpy(dir, fname, slash - fname);
- dir[slash - fname] = 0;
- file->dir = dir;
- } else {
- file->dir = NULL;
- }
-
- if (streq(fname, "-")) {
- file->name = "stdin";
- file->file = stdin;
- return file;
- }
-
- if (fname[0] == '/') {
- file->file = fopen(fname, "r");
- if (!file->file)
- goto fail;
-
- file->name = strdup(fname);
- return file;
- }
-
- if (!search)
- search = &default_search;
-
- while (search) {
- if (dtc_open_one(file, search->dir, fname))
- return file;
-
- if (errno != ENOENT)
- goto fail;
-
- search = search->next;
- }
-
-fail:
- die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
-}
-
-void dtc_close_file(struct dtc_file *file)
-{
- if (fclose(file->file))
- die("Error closing \"%s\": %s\n", file->name, strerror(errno));
-
- free(file->dir);
- free(file);
-}
+++ /dev/null
-/*
- * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-/*
- * Augment the standard YYLTYPE with a filenum index into an
- * array of all opened filenames.
- */
-
-#include <stdio.h>
-
-struct dtc_file {
- char *dir;
- const char *name;
- FILE *file;
-};
-
-#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
-typedef struct YYLTYPE {
- int first_line;
- int first_column;
- int last_line;
- int last_column;
- struct dtc_file *file;
-} YYLTYPE;
-
-#define YYLTYPE_IS_DECLARED 1
-#define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-/* Cater to old parser templates. */
-#ifndef YYID
-#define YYID(n) (n)
-#endif
-
-#define YYLLOC_DEFAULT(Current, Rhs, N) \
- do \
- if (YYID (N)) \
- { \
- (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
- (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
- (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
- (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- (Current).file = YYRHSLOC (Rhs, N).file; \
- } \
- else \
- { \
- (Current).first_line = (Current).last_line = \
- YYRHSLOC (Rhs, 0).last_line; \
- (Current).first_column = (Current).last_column = \
- YYRHSLOC (Rhs, 0).last_column; \
- (Current).file = YYRHSLOC (Rhs, 0).file; \
- } \
- while (YYID (0))
-
-
-
-extern void yyerror(char const *);
-extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
-
-extern struct dtc_file *srcpos_file;
-
-struct search_path {
- const char *dir; /* NULL for current directory */
- struct search_path *prev, *next;
-};
-
-extern struct dtc_file *dtc_open_file(const char *fname,
- const struct search_path *search);
-extern void dtc_close_file(struct dtc_file *file);
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern FILE *yyin;
-extern int yyparse(void);
-
-struct boot_info *the_boot_info;
-int treesource_error;
-
-struct boot_info *dt_from_source(const char *fname)
-{
- the_boot_info = NULL;
- treesource_error = 0;
-
- srcpos_file = dtc_open_file(fname, NULL);
- yyin = srcpos_file->file;
-
- if (yyparse() != 0)
- die("Unable to parse input tree\n");
-
- if (treesource_error)
- die("Syntax error parsing input tree\n");
-
- return the_boot_info;
-}
-
-static void write_prefix(FILE *f, int level)
-{
- int i;
-
- for (i = 0; i < level; i++)
- fputc('\t', f);
-}
-
-int isstring(char c)
-{
- return (isprint(c)
- || (c == '\0')
- || strchr("\a\b\t\n\v\f\r", c));
-}
-
-static void write_propval_string(FILE *f, struct data val)
-{
- const char *str = val.val;
- int i;
- int newchunk = 1;
- struct marker *m = val.markers;
-
- assert(str[val.len-1] == '\0');
-
- for (i = 0; i < (val.len-1); i++) {
- char c = str[i];
-
- if (newchunk) {
- while (m && (m->offset <= i)) {
- if (m->type == LABEL) {
- assert(m->offset == i);
- fprintf(f, "%s: ", m->ref);
- }
- m = m->next;
- }
- fprintf(f, "\"");
- newchunk = 0;
- }
-
- switch (c) {
- case '\a':
- fprintf(f, "\\a");
- break;
- case '\b':
- fprintf(f, "\\b");
- break;
- case '\t':
- fprintf(f, "\\t");
- break;
- case '\n':
- fprintf(f, "\\n");
- break;
- case '\v':
- fprintf(f, "\\v");
- break;
- case '\f':
- fprintf(f, "\\f");
- break;
- case '\r':
- fprintf(f, "\\r");
- break;
- case '\\':
- fprintf(f, "\\\\");
- break;
- case '\"':
- fprintf(f, "\\\"");
- break;
- case '\0':
- fprintf(f, "\", ");
- newchunk = 1;
- break;
- default:
- if (isprint(c))
- fprintf(f, "%c", c);
- else
- fprintf(f, "\\x%02hhx", c);
- }
- }
- fprintf(f, "\"");
-
- /* Wrap up any labels at the end of the value */
- for_each_marker_of_type(m, LABEL) {
- assert (m->offset == val.len);
- fprintf(f, " %s:", m->ref);
- }
-}
-
-static void write_propval_cells(FILE *f, struct data val)
-{
- void *propend = val.val + val.len;
- cell_t *cp = (cell_t *)val.val;
- struct marker *m = val.markers;
-
- fprintf(f, "<");
- for (;;) {
- while (m && (m->offset <= ((char *)cp - val.val))) {
- if (m->type == LABEL) {
- assert(m->offset == ((char *)cp - val.val));
- fprintf(f, "%s: ", m->ref);
- }
- m = m->next;
- }
-
- fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
- if ((void *)cp >= propend)
- break;
- fprintf(f, " ");
- }
-
- /* Wrap up any labels at the end of the value */
- for_each_marker_of_type(m, LABEL) {
- assert (m->offset == val.len);
- fprintf(f, " %s:", m->ref);
- }
- fprintf(f, ">");
-}
-
-static void write_propval_bytes(FILE *f, struct data val)
-{
- void *propend = val.val + val.len;
- const char *bp = val.val;
- struct marker *m = val.markers;
-
- fprintf(f, "[");
- for (;;) {
- while (m && (m->offset == (bp-val.val))) {
- if (m->type == LABEL)
- fprintf(f, "%s: ", m->ref);
- m = m->next;
- }
-
- fprintf(f, "%02hhx", *bp++);
- if ((const void *)bp >= propend)
- break;
- fprintf(f, " ");
- }
-
- /* Wrap up any labels at the end of the value */
- for_each_marker_of_type(m, LABEL) {
- assert (m->offset == val.len);
- fprintf(f, " %s:", m->ref);
- }
- fprintf(f, "]");
-}
-
-static void write_propval(FILE *f, struct property *prop)
-{
- int len = prop->val.len;
- const char *p = prop->val.val;
- struct marker *m = prop->val.markers;
- int nnotstring = 0, nnul = 0;
- int nnotstringlbl = 0, nnotcelllbl = 0;
- int i;
-
- if (len == 0) {
- fprintf(f, ";\n");
- return;
- }
-
- for (i = 0; i < len; i++) {
- if (! isstring(p[i]))
- nnotstring++;
- if (p[i] == '\0')
- nnul++;
- }
-
- for_each_marker_of_type(m, LABEL) {
- if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0'))
- nnotstringlbl++;
- if ((m->offset % sizeof(cell_t)) != 0)
- nnotcelllbl++;
- }
-
- fprintf(f, " = ");
- if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul))
- && (nnotstringlbl == 0)) {
- write_propval_string(f, prop->val);
- } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) {
- write_propval_cells(f, prop->val);
- } else {
- write_propval_bytes(f, prop->val);
- }
-
- fprintf(f, ";\n");
-}
-
-static void write_tree_source_node(FILE *f, struct node *tree, int level)
-{
- struct property *prop;
- struct node *child;
-
- write_prefix(f, level);
- if (tree->label)
- fprintf(f, "%s: ", tree->label);
- if (tree->name && (*tree->name))
- fprintf(f, "%s {\n", tree->name);
- else
- fprintf(f, "/ {\n");
-
- for_each_property(tree, prop) {
- write_prefix(f, level+1);
- if (prop->label)
- fprintf(f, "%s: ", prop->label);
- fprintf(f, "%s", prop->name);
- write_propval(f, prop);
- }
- for_each_child(tree, child) {
- fprintf(f, "\n");
- write_tree_source_node(f, child, level+1);
- }
- write_prefix(f, level);
- fprintf(f, "};\n");
-}
-
-
-void dt_to_source(FILE *f, struct boot_info *bi)
-{
- struct reserve_info *re;
-
- fprintf(f, "/dts-v1/;\n\n");
-
- for (re = bi->reservelist; re; re = re->next) {
- if (re->label)
- fprintf(f, "%s: ", re->label);
- fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n",
- (unsigned long long)re->re.address,
- (unsigned long long)re->re.size);
- }
-
- write_tree_source_node(f, bi->dt, 0);
-}
-
+++ /dev/null
-#define DTC_VERSION "DTC 1.2.0"
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
+ device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xfe000000 0x02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <1>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@200000 {
+ label = "rootfs";
+ reg = <0x00200000 0x01d00000>;
+ };
+ partition@1f00000 {
+ label = "u-boot";
+ reg = <0x01f00000 0x00060000>;
+ };
+ partition@1f60000 {
+ label = "u-boot-env";
+ reg = <0x01f60000 0x00020000>;
+ };
+ partition@1f80000 {
+ label = "dtb";
+ reg = <0x01f80000 0x00080000>;
+ };
+ };
+ };
+
};
+++ /dev/null
-# Makefile.libfdt
-#
-# This is not a complete Makefile of itself. Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-LIBFDT_INCLUDES = fdt.h libfdt.h
-LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-int fdt_check_header(const void *fdt)
-{
- if (fdt_magic(fdt) == FDT_MAGIC) {
- /* Complete tree */
- if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
- return -FDT_ERR_BADVERSION;
- if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
- return -FDT_ERR_BADVERSION;
- } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
- /* Unfinished sequential-write blob */
- if (fdt_size_dt_struct(fdt) == 0)
- return -FDT_ERR_BADSTATE;
- } else {
- return -FDT_ERR_BADMAGIC;
- }
-
- return 0;
-}
-
-const void *fdt_offset_ptr(const void *fdt, int offset, int len)
-{
- const char *p;
-
- if (fdt_version(fdt) >= 0x11)
- if (((offset + len) < offset)
- || ((offset + len) > fdt_size_dt_struct(fdt)))
- return NULL;
-
- p = _fdt_offset_ptr(fdt, offset);
-
- if (p + len < p)
- return NULL;
- return p;
-}
-
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
-{
- const uint32_t *tagp, *lenp;
- uint32_t tag;
- const char *p;
-
- if (offset % FDT_TAGSIZE)
- return -1;
-
- tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
- if (! tagp)
- return FDT_END; /* premature end */
- tag = fdt32_to_cpu(*tagp);
- offset += FDT_TAGSIZE;
-
- switch (tag) {
- case FDT_BEGIN_NODE:
- /* skip name */
- do {
- p = fdt_offset_ptr(fdt, offset++, 1);
- } while (p && (*p != '\0'));
- if (! p)
- return FDT_END;
- break;
- case FDT_PROP:
- lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
- if (! lenp)
- return FDT_END;
- /* skip name offset, length and value */
- offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
- break;
- }
-
- if (nextoffset)
- *nextoffset = FDT_TAGALIGN(offset);
-
- return tag;
-}
-
-int _fdt_check_node_offset(const void *fdt, int offset)
-{
- if ((offset < 0) || (offset % FDT_TAGSIZE)
- || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
- return -FDT_ERR_BADOFFSET;
-
- return offset;
-}
-
-int fdt_next_node(const void *fdt, int offset, int *depth)
-{
- int nextoffset = 0;
- uint32_t tag;
-
- if (offset >= 0)
- if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
- return nextoffset;
-
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
-
- switch (tag) {
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- case FDT_BEGIN_NODE:
- if (depth)
- (*depth)++;
- break;
-
- case FDT_END_NODE:
- if (depth)
- (*depth)--;
- break;
-
- case FDT_END:
- return -FDT_ERR_NOTFOUND;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (tag != FDT_BEGIN_NODE);
-
- return offset;
-}
-
-const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
-{
- int len = strlen(s) + 1;
- const char *last = strtab + tabsize - len;
- const char *p;
-
- for (p = strtab; p <= last; p++)
- if (memcmp(p, s, len) == 0)
- return p;
- return NULL;
-}
-
-int fdt_move(const void *fdt, void *buf, int bufsize)
-{
- FDT_CHECK_HEADER(fdt);
-
- if (fdt_totalsize(fdt) > bufsize)
- return -FDT_ERR_NOSPACE;
-
- memmove(buf, fdt, fdt_totalsize(fdt));
- return 0;
-}
+++ /dev/null
-#ifndef _FDT_H
-#define _FDT_H
-
-#ifndef __ASSEMBLY__
-
-struct fdt_header {
- uint32_t magic; /* magic word FDT_MAGIC */
- uint32_t totalsize; /* total size of DT block */
- uint32_t off_dt_struct; /* offset to structure */
- uint32_t off_dt_strings; /* offset to strings */
- uint32_t off_mem_rsvmap; /* offset to memory reserve map */
- uint32_t version; /* format version */
- uint32_t last_comp_version; /* last compatible version */
-
- /* version 2 fields below */
- uint32_t boot_cpuid_phys; /* Which physical CPU id we're
- booting on */
- /* version 3 fields below */
- uint32_t size_dt_strings; /* size of the strings block */
-
- /* version 17 fields below */
- uint32_t size_dt_struct; /* size of the structure block */
-};
-
-struct fdt_reserve_entry {
- uint64_t address;
- uint64_t size;
-};
-
-struct fdt_node_header {
- uint32_t tag;
- char name[0];
-};
-
-struct fdt_property {
- uint32_t tag;
- uint32_t len;
- uint32_t nameoff;
- char data[0];
-};
-
-#endif /* !__ASSEMBLY */
-
-#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
-#define FDT_TAGSIZE sizeof(uint32_t)
-
-#define FDT_BEGIN_NODE 0x1 /* Start node: full name */
-#define FDT_END_NODE 0x2 /* End node */
-#define FDT_PROP 0x3 /* Property: name off,
- size, content */
-#define FDT_NOP 0x4 /* nop */
-#define FDT_END 0x9
-
-#define FDT_V1_SIZE (7*sizeof(uint32_t))
-#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t))
-#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t))
-#define FDT_V16_SIZE FDT_V3_SIZE
-#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t))
-
-#endif /* _FDT_H */
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_nodename_eq(const void *fdt, int offset,
- const char *s, int len)
-{
- const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
-
- if (! p)
- /* short match */
- return 0;
-
- if (memcmp(p, s, len) != 0)
- return 0;
-
- if (p[len] == '\0')
- return 1;
- else if (!memchr(s, '@', len) && (p[len] == '@'))
- return 1;
- else
- return 0;
-}
-
-const char *fdt_string(const void *fdt, int stroffset)
-{
- return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
-}
-
-int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
-{
- FDT_CHECK_HEADER(fdt);
- *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
- *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
- return 0;
-}
-
-int fdt_num_mem_rsv(const void *fdt)
-{
- int i = 0;
-
- while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0)
- i++;
- return i;
-}
-
-int fdt_subnode_offset_namelen(const void *fdt, int offset,
- const char *name, int namelen)
-{
- int depth;
-
- FDT_CHECK_HEADER(fdt);
-
- for (depth = 0, offset = fdt_next_node(fdt, offset, &depth);
- (offset >= 0) && (depth > 0);
- offset = fdt_next_node(fdt, offset, &depth)) {
- if (depth < 0)
- return -FDT_ERR_NOTFOUND;
- else if ((depth == 1)
- && _fdt_nodename_eq(fdt, offset, name, namelen))
- return offset;
- }
-
- if (offset < 0)
- return offset; /* error */
- else
- return -FDT_ERR_NOTFOUND;
-}
-
-int fdt_subnode_offset(const void *fdt, int parentoffset,
- const char *name)
-{
- return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
-}
-
-int fdt_path_offset(const void *fdt, const char *path)
-{
- const char *end = path + strlen(path);
- const char *p = path;
- int offset = 0;
-
- FDT_CHECK_HEADER(fdt);
-
- if (*path != '/')
- return -FDT_ERR_BADPATH;
-
- while (*p) {
- const char *q;
-
- while (*p == '/')
- p++;
- if (! *p)
- return offset;
- q = strchr(p, '/');
- if (! q)
- q = end;
-
- offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
- if (offset < 0)
- return offset;
-
- p = q;
- }
-
- return offset;
-}
-
-const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
-{
- const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset);
- int err;
-
- if (((err = fdt_check_header(fdt)) != 0)
- || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
- goto fail;
-
- if (len)
- *len = strlen(nh->name);
-
- return nh->name;
-
- fail:
- if (len)
- *len = err;
- return NULL;
-}
-
-const struct fdt_property *fdt_get_property(const void *fdt,
- int nodeoffset,
- const char *name, int *lenp)
-{
- uint32_t tag;
- const struct fdt_property *prop;
- int namestroff;
- int offset, nextoffset;
- int err;
-
- if (((err = fdt_check_header(fdt)) != 0)
- || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
- goto fail;
-
- nextoffset = err;
- do {
- offset = nextoffset;
-
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- switch (tag) {
- case FDT_END:
- err = -FDT_ERR_TRUNCATED;
- goto fail;
-
- case FDT_BEGIN_NODE:
- case FDT_END_NODE:
- case FDT_NOP:
- break;
-
- case FDT_PROP:
- err = -FDT_ERR_BADSTRUCTURE;
- prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
- if (! prop)
- goto fail;
- namestroff = fdt32_to_cpu(prop->nameoff);
- if (strcmp(fdt_string(fdt, namestroff), name) == 0) {
- /* Found it! */
- int len = fdt32_to_cpu(prop->len);
- prop = fdt_offset_ptr(fdt, offset,
- sizeof(*prop)+len);
- if (! prop)
- goto fail;
-
- if (lenp)
- *lenp = len;
-
- return prop;
- }
- break;
-
- default:
- err = -FDT_ERR_BADSTRUCTURE;
- goto fail;
- }
- } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
-
- err = -FDT_ERR_NOTFOUND;
- fail:
- if (lenp)
- *lenp = err;
- return NULL;
-}
-
-const void *fdt_getprop(const void *fdt, int nodeoffset,
- const char *name, int *lenp)
-{
- const struct fdt_property *prop;
-
- prop = fdt_get_property(fdt, nodeoffset, name, lenp);
- if (! prop)
- return NULL;
-
- return prop->data;
-}
-
-uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
-{
- const uint32_t *php;
- int len;
-
- php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
- if (!php || (len != sizeof(*php)))
- return 0;
-
- return fdt32_to_cpu(*php);
-}
-
-int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
-{
- int pdepth = 0, p = 0;
- int offset, depth, namelen;
- const char *name;
-
- FDT_CHECK_HEADER(fdt);
-
- if (buflen < 2)
- return -FDT_ERR_NOSPACE;
-
- for (offset = 0, depth = 0;
- (offset >= 0) && (offset <= nodeoffset);
- offset = fdt_next_node(fdt, offset, &depth)) {
- if (pdepth < depth)
- continue; /* overflowed buffer */
-
- while (pdepth > depth) {
- do {
- p--;
- } while (buf[p-1] != '/');
- pdepth--;
- }
-
- name = fdt_get_name(fdt, offset, &namelen);
- if (!name)
- return namelen;
- if ((p + namelen + 1) <= buflen) {
- memcpy(buf + p, name, namelen);
- p += namelen;
- buf[p++] = '/';
- pdepth++;
- }
-
- if (offset == nodeoffset) {
- if (pdepth < (depth + 1))
- return -FDT_ERR_NOSPACE;
-
- if (p > 1) /* special case so that root path is "/", not "" */
- p--;
- buf[p] = '\0';
- return p;
- }
- }
-
- if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
- return -FDT_ERR_BADOFFSET;
- else if (offset == -FDT_ERR_BADOFFSET)
- return -FDT_ERR_BADSTRUCTURE;
-
- return offset; /* error from fdt_next_node() */
-}
-
-int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
- int supernodedepth, int *nodedepth)
-{
- int offset, depth;
- int supernodeoffset = -FDT_ERR_INTERNAL;
-
- FDT_CHECK_HEADER(fdt);
-
- if (supernodedepth < 0)
- return -FDT_ERR_NOTFOUND;
-
- for (offset = 0, depth = 0;
- (offset >= 0) && (offset <= nodeoffset);
- offset = fdt_next_node(fdt, offset, &depth)) {
- if (depth == supernodedepth)
- supernodeoffset = offset;
-
- if (offset == nodeoffset) {
- if (nodedepth)
- *nodedepth = depth;
-
- if (supernodedepth > depth)
- return -FDT_ERR_NOTFOUND;
- else
- return supernodeoffset;
- }
- }
-
- if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
- return -FDT_ERR_BADOFFSET;
- else if (offset == -FDT_ERR_BADOFFSET)
- return -FDT_ERR_BADSTRUCTURE;
-
- return offset; /* error from fdt_next_node() */
-}
-
-int fdt_node_depth(const void *fdt, int nodeoffset)
-{
- int nodedepth;
- int err;
-
- err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
- if (err)
- return (err < 0) ? err : -FDT_ERR_INTERNAL;
- return nodedepth;
-}
-
-int fdt_parent_offset(const void *fdt, int nodeoffset)
-{
- int nodedepth = fdt_node_depth(fdt, nodeoffset);
-
- if (nodedepth < 0)
- return nodedepth;
- return fdt_supernode_atdepth_offset(fdt, nodeoffset,
- nodedepth - 1, NULL);
-}
-
-int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
- const char *propname,
- const void *propval, int proplen)
-{
- int offset;
- const void *val;
- int len;
-
- FDT_CHECK_HEADER(fdt);
-
- /* FIXME: The algorithm here is pretty horrible: we scan each
- * property of a node in fdt_getprop(), then if that didn't
- * find what we want, we scan over them again making our way
- * to the next node. Still it's the easiest to implement
- * approach; performance can come later. */
- for (offset = fdt_next_node(fdt, startoffset, NULL);
- offset >= 0;
- offset = fdt_next_node(fdt, offset, NULL)) {
- val = fdt_getprop(fdt, offset, propname, &len);
- if (val && (len == proplen)
- && (memcmp(val, propval, len) == 0))
- return offset;
- }
-
- return offset; /* error from fdt_next_node() */
-}
-
-int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
-{
- if ((phandle == 0) || (phandle == -1))
- return -FDT_ERR_BADPHANDLE;
- phandle = cpu_to_fdt32(phandle);
- return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle",
- &phandle, sizeof(phandle));
-}
-
-int _stringlist_contains(const char *strlist, int listlen, const char *str)
-{
- int len = strlen(str);
- const char *p;
-
- while (listlen >= len) {
- if (memcmp(str, strlist, len+1) == 0)
- return 1;
- p = memchr(strlist, '\0', listlen);
- if (!p)
- return 0; /* malformed strlist.. */
- listlen -= (p-strlist) + 1;
- strlist = p + 1;
- }
- return 0;
-}
-
-int fdt_node_check_compatible(const void *fdt, int nodeoffset,
- const char *compatible)
-{
- const void *prop;
- int len;
-
- prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
- if (!prop)
- return len;
- if (_stringlist_contains(prop, len, compatible))
- return 0;
- else
- return 1;
-}
-
-int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
- const char *compatible)
-{
- int offset, err;
-
- FDT_CHECK_HEADER(fdt);
-
- /* FIXME: The algorithm here is pretty horrible: we scan each
- * property of a node in fdt_node_check_compatible(), then if
- * that didn't find what we want, we scan over them again
- * making our way to the next node. Still it's the easiest to
- * implement approach; performance can come later. */
- for (offset = fdt_next_node(fdt, startoffset, NULL);
- offset >= 0;
- offset = fdt_next_node(fdt, offset, NULL)) {
- err = fdt_node_check_compatible(fdt, offset, compatible);
- if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
- return err;
- else if (err == 0)
- return offset;
- }
-
- return offset; /* error from fdt_next_node() */
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_blocks_misordered(const void *fdt,
- int mem_rsv_size, int struct_size)
-{
- return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
- || (fdt_off_dt_struct(fdt) <
- (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
- || (fdt_off_dt_strings(fdt) <
- (fdt_off_dt_struct(fdt) + struct_size))
- || (fdt_totalsize(fdt) <
- (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
-}
-
-static int _fdt_rw_check_header(void *fdt)
-{
- FDT_CHECK_HEADER(fdt);
-
- if (fdt_version(fdt) < 17)
- return -FDT_ERR_BADVERSION;
- if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
- fdt_size_dt_struct(fdt)))
- return -FDT_ERR_BADLAYOUT;
- if (fdt_version(fdt) > 17)
- fdt_set_version(fdt, 17);
-
- return 0;
-}
-
-#define FDT_RW_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = _fdt_rw_check_header(fdt)) != 0) \
- return err; \
- }
-
-static inline int _fdt_data_size(void *fdt)
-{
- return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
-}
-
-static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen)
-{
- char *p = splicepoint;
- char *end = (char *)fdt + _fdt_data_size(fdt);
-
- if (((p + oldlen) < p) || ((p + oldlen) > end))
- return -FDT_ERR_BADOFFSET;
- if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
- return -FDT_ERR_NOSPACE;
- memmove(p + newlen, p + oldlen, end - p - oldlen);
- return 0;
-}
-
-static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
- int oldn, int newn)
-{
- int delta = (newn - oldn) * sizeof(*p);
- int err;
- err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
- if (err)
- return err;
- fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
- fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
- return 0;
-}
-
-static int _fdt_splice_struct(void *fdt, void *p,
- int oldlen, int newlen)
-{
- int delta = newlen - oldlen;
- int err;
-
- if ((err = _fdt_splice(fdt, p, oldlen, newlen)))
- return err;
-
- fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
- fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
- return 0;
-}
-
-static int _fdt_splice_string(void *fdt, int newlen)
-{
- void *p = (char *)fdt
- + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
- int err;
-
- if ((err = _fdt_splice(fdt, p, 0, newlen)))
- return err;
-
- fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
- return 0;
-}
-
-static int _fdt_find_add_string(void *fdt, const char *s)
-{
- char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
- const char *p;
- char *new;
- int len = strlen(s) + 1;
- int err;
-
- p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s);
- if (p)
- /* found it */
- return (p - strtab);
-
- new = strtab + fdt_size_dt_strings(fdt);
- err = _fdt_splice_string(fdt, len);
- if (err)
- return err;
-
- memcpy(new, s, len);
- return (new - strtab);
-}
-
-int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
-{
- struct fdt_reserve_entry *re;
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
- err = _fdt_splice_mem_rsv(fdt, re, 0, 1);
- if (err)
- return err;
-
- re->address = cpu_to_fdt64(address);
- re->size = cpu_to_fdt64(size);
- return 0;
-}
-
-int fdt_del_mem_rsv(void *fdt, int n)
-{
- struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- if (n >= fdt_num_mem_rsv(fdt))
- return -FDT_ERR_NOTFOUND;
-
- err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
- if (err)
- return err;
- return 0;
-}
-
-static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
- int len, struct fdt_property **prop)
-{
- int oldlen;
- int err;
-
- *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
- if (! (*prop))
- return oldlen;
-
- if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
- FDT_TAGALIGN(len))))
- return err;
-
- (*prop)->len = cpu_to_fdt32(len);
- return 0;
-}
-
-static int _fdt_add_property(void *fdt, int nodeoffset, const char *name,
- int len, struct fdt_property **prop)
-{
- int proplen;
- int nextoffset;
- int namestroff;
- int err;
-
- if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0)
- return nextoffset;
-
- namestroff = _fdt_find_add_string(fdt, name);
- if (namestroff < 0)
- return namestroff;
-
- *prop = _fdt_offset_ptr_w(fdt, nextoffset);
- proplen = sizeof(**prop) + FDT_TAGALIGN(len);
-
- err = _fdt_splice_struct(fdt, *prop, 0, proplen);
- if (err)
- return err;
-
- (*prop)->tag = cpu_to_fdt32(FDT_PROP);
- (*prop)->nameoff = cpu_to_fdt32(namestroff);
- (*prop)->len = cpu_to_fdt32(len);
- return 0;
-}
-
-int fdt_set_name(void *fdt, int nodeoffset, const char *name)
-{
- char *namep;
- int oldlen, newlen;
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
- if (!namep)
- return oldlen;
-
- newlen = strlen(name);
-
- err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1),
- FDT_TAGALIGN(newlen+1));
- if (err)
- return err;
-
- memcpy(namep, name, newlen+1);
- return 0;
-}
-
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
- const void *val, int len)
-{
- struct fdt_property *prop;
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop);
- if (err == -FDT_ERR_NOTFOUND)
- err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
- if (err)
- return err;
-
- memcpy(prop->data, val, len);
- return 0;
-}
-
-int fdt_delprop(void *fdt, int nodeoffset, const char *name)
-{
- struct fdt_property *prop;
- int len, proplen;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
- if (! prop)
- return len;
-
- proplen = sizeof(*prop) + FDT_TAGALIGN(len);
- return _fdt_splice_struct(fdt, prop, proplen, 0);
-}
-
-int fdt_add_subnode_namelen(void *fdt, int parentoffset,
- const char *name, int namelen)
-{
- struct fdt_node_header *nh;
- int offset, nextoffset;
- int nodelen;
- int err;
- uint32_t tag;
- uint32_t *endtag;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
- if (offset >= 0)
- return -FDT_ERR_EXISTS;
- else if (offset != -FDT_ERR_NOTFOUND)
- return offset;
-
- /* Try to place the new node after the parent's properties */
- fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- } while ((tag == FDT_PROP) || (tag == FDT_NOP));
-
- nh = _fdt_offset_ptr_w(fdt, offset);
- nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
-
- err = _fdt_splice_struct(fdt, nh, 0, nodelen);
- if (err)
- return err;
-
- nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
- memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
- memcpy(nh->name, name, namelen);
- endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
- *endtag = cpu_to_fdt32(FDT_END_NODE);
-
- return offset;
-}
-
-int fdt_add_subnode(void *fdt, int parentoffset, const char *name)
-{
- return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name));
-}
-
-int fdt_del_node(void *fdt, int nodeoffset)
-{
- int endoffset;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- endoffset = _fdt_node_end_offset(fdt, nodeoffset);
- if (endoffset < 0)
- return endoffset;
-
- return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
- endoffset - nodeoffset, 0);
-}
-
-static void _fdt_packblocks(const char *old, char *new,
- int mem_rsv_size, int struct_size)
-{
- int mem_rsv_off, struct_off, strings_off;
-
- mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
- struct_off = mem_rsv_off + mem_rsv_size;
- strings_off = struct_off + struct_size;
-
- memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
- fdt_set_off_mem_rsvmap(new, mem_rsv_off);
-
- memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
- fdt_set_off_dt_struct(new, struct_off);
- fdt_set_size_dt_struct(new, struct_size);
-
- memmove(new + strings_off, old + fdt_off_dt_strings(old),
- fdt_size_dt_strings(old));
- fdt_set_off_dt_strings(new, strings_off);
- fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
-}
-
-int fdt_open_into(const void *fdt, void *buf, int bufsize)
-{
- int err;
- int mem_rsv_size, struct_size;
- int newsize;
- const char *fdtstart = fdt;
- const char *fdtend = fdtstart + fdt_totalsize(fdt);
- char *tmp;
-
- FDT_CHECK_HEADER(fdt);
-
- mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
- * sizeof(struct fdt_reserve_entry);
-
- if (fdt_version(fdt) >= 17) {
- struct_size = fdt_size_dt_struct(fdt);
- } else {
- struct_size = 0;
- while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
- ;
- }
-
- if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
- /* no further work necessary */
- err = fdt_move(fdt, buf, bufsize);
- if (err)
- return err;
- fdt_set_version(buf, 17);
- fdt_set_size_dt_struct(buf, struct_size);
- fdt_set_totalsize(buf, bufsize);
- return 0;
- }
-
- /* Need to reorder */
- newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
- + struct_size + fdt_size_dt_strings(fdt);
-
- if (bufsize < newsize)
- return -FDT_ERR_NOSPACE;
-
- /* First attempt to build converted tree at beginning of buffer */
- tmp = buf;
- /* But if that overlaps with the old tree... */
- if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
- /* Try right after the old tree instead */
- tmp = (char *)(uintptr_t)fdtend;
- if ((tmp + newsize) > ((char *)buf + bufsize))
- return -FDT_ERR_NOSPACE;
- }
-
- _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size);
- memmove(buf, tmp, newsize);
-
- fdt_set_magic(buf, FDT_MAGIC);
- fdt_set_totalsize(buf, bufsize);
- fdt_set_version(buf, 17);
- fdt_set_last_comp_version(buf, 16);
- fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
-
- return 0;
-}
-
-int fdt_pack(void *fdt)
-{
- int mem_rsv_size;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
- * sizeof(struct fdt_reserve_entry);
- _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
- fdt_set_totalsize(fdt, _fdt_data_size(fdt));
-
- return 0;
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-struct fdt_errtabent {
- const char *str;
-};
-
-#define FDT_ERRTABENT(val) \
- [(val)] = { .str = #val, }
-
-static struct fdt_errtabent fdt_errtable[] = {
- FDT_ERRTABENT(FDT_ERR_NOTFOUND),
- FDT_ERRTABENT(FDT_ERR_EXISTS),
- FDT_ERRTABENT(FDT_ERR_NOSPACE),
-
- FDT_ERRTABENT(FDT_ERR_BADOFFSET),
- FDT_ERRTABENT(FDT_ERR_BADPATH),
- FDT_ERRTABENT(FDT_ERR_BADSTATE),
-
- FDT_ERRTABENT(FDT_ERR_TRUNCATED),
- FDT_ERRTABENT(FDT_ERR_BADMAGIC),
- FDT_ERRTABENT(FDT_ERR_BADVERSION),
- FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
- FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
-};
-#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
-
-const char *fdt_strerror(int errval)
-{
- if (errval > 0)
- return "<valid offset/length>";
- else if (errval == 0)
- return "<no error>";
- else if (errval > -FDT_ERRTABSIZE) {
- const char *s = fdt_errtable[-errval].str;
-
- if (s)
- return s;
- }
-
- return "<unknown error>";
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_sw_check_header(void *fdt)
-{
- if (fdt_magic(fdt) != FDT_SW_MAGIC)
- return -FDT_ERR_BADMAGIC;
- /* FIXME: should check more details about the header state */
- return 0;
-}
-
-#define FDT_SW_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = _fdt_sw_check_header(fdt)) != 0) \
- return err; \
- }
-
-static void *_fdt_grab_space(void *fdt, int len)
-{
- int offset = fdt_size_dt_struct(fdt);
- int spaceleft;
-
- spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
- - fdt_size_dt_strings(fdt);
-
- if ((offset + len < offset) || (offset + len > spaceleft))
- return NULL;
-
- fdt_set_size_dt_struct(fdt, offset + len);
- return fdt_offset_ptr_w(fdt, offset, len);
-}
-
-int fdt_create(void *buf, int bufsize)
-{
- void *fdt = buf;
-
- if (bufsize < sizeof(struct fdt_header))
- return -FDT_ERR_NOSPACE;
-
- memset(buf, 0, bufsize);
-
- fdt_set_magic(fdt, FDT_SW_MAGIC);
- fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
- fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
- fdt_set_totalsize(fdt, bufsize);
-
- fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
- sizeof(struct fdt_reserve_entry)));
- fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
- fdt_set_off_dt_strings(fdt, bufsize);
-
- return 0;
-}
-
-int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
-{
- struct fdt_reserve_entry *re;
- int offset;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- if (fdt_size_dt_struct(fdt))
- return -FDT_ERR_BADSTATE;
-
- offset = fdt_off_dt_struct(fdt);
- if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
- return -FDT_ERR_NOSPACE;
-
- re = (struct fdt_reserve_entry *)((char *)fdt + offset);
- re->address = cpu_to_fdt64(addr);
- re->size = cpu_to_fdt64(size);
-
- fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
-
- return 0;
-}
-
-int fdt_finish_reservemap(void *fdt)
-{
- return fdt_add_reservemap_entry(fdt, 0, 0);
-}
-
-int fdt_begin_node(void *fdt, const char *name)
-{
- struct fdt_node_header *nh;
- int namelen = strlen(name) + 1;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
- if (! nh)
- return -FDT_ERR_NOSPACE;
-
- nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
- memcpy(nh->name, name, namelen);
- return 0;
-}
-
-int fdt_end_node(void *fdt)
-{
- uint32_t *en;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- en = _fdt_grab_space(fdt, FDT_TAGSIZE);
- if (! en)
- return -FDT_ERR_NOSPACE;
-
- *en = cpu_to_fdt32(FDT_END_NODE);
- return 0;
-}
-
-static int _fdt_find_add_string(void *fdt, const char *s)
-{
- char *strtab = (char *)fdt + fdt_totalsize(fdt);
- const char *p;
- int strtabsize = fdt_size_dt_strings(fdt);
- int len = strlen(s) + 1;
- int struct_top, offset;
-
- p = _fdt_find_string(strtab - strtabsize, strtabsize, s);
- if (p)
- return p - strtab;
-
- /* Add it */
- offset = -strtabsize - len;
- struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
- if (fdt_totalsize(fdt) + offset < struct_top)
- return 0; /* no more room :( */
-
- memcpy(strtab + offset, s, len);
- fdt_set_size_dt_strings(fdt, strtabsize + len);
- return offset;
-}
-
-int fdt_property(void *fdt, const char *name, const void *val, int len)
-{
- struct fdt_property *prop;
- int nameoff;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- nameoff = _fdt_find_add_string(fdt, name);
- if (nameoff == 0)
- return -FDT_ERR_NOSPACE;
-
- prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
- if (! prop)
- return -FDT_ERR_NOSPACE;
-
- prop->tag = cpu_to_fdt32(FDT_PROP);
- prop->nameoff = cpu_to_fdt32(nameoff);
- prop->len = cpu_to_fdt32(len);
- memcpy(prop->data, val, len);
- return 0;
-}
-
-int fdt_finish(void *fdt)
-{
- char *p = (char *)fdt;
- uint32_t *end;
- int oldstroffset, newstroffset;
- uint32_t tag;
- int offset, nextoffset;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- /* Add terminator */
- end = _fdt_grab_space(fdt, sizeof(*end));
- if (! end)
- return -FDT_ERR_NOSPACE;
- *end = cpu_to_fdt32(FDT_END);
-
- /* Relocate the string table */
- oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
- newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
- memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
- fdt_set_off_dt_strings(fdt, newstroffset);
-
- /* Walk the structure, correcting string offsets */
- offset = 0;
- while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
- if (tag == FDT_PROP) {
- struct fdt_property *prop =
- fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
- int nameoff;
-
- if (! prop)
- return -FDT_ERR_BADSTRUCTURE;
-
- nameoff = fdt32_to_cpu(prop->nameoff);
- nameoff += fdt_size_dt_strings(fdt);
- prop->nameoff = cpu_to_fdt32(nameoff);
- }
- offset = nextoffset;
- }
-
- /* Finally, adjust the header */
- fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
- fdt_set_magic(fdt, FDT_MAGIC);
- return 0;
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
- const void *val, int len)
-{
- void *propval;
- int proplen;
-
- propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
- if (! propval)
- return proplen;
-
- if (proplen != len)
- return -FDT_ERR_NOSPACE;
-
- memcpy(propval, val, len);
- return 0;
-}
-
-static void _fdt_nop_region(void *start, int len)
-{
- uint32_t *p;
-
- for (p = start; (char *)p < ((char *)start + len); p++)
- *p = cpu_to_fdt32(FDT_NOP);
-}
-
-int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
-{
- struct fdt_property *prop;
- int len;
-
- prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
- if (! prop)
- return len;
-
- _fdt_nop_region(prop, len + sizeof(*prop));
-
- return 0;
-}
-
-int _fdt_node_end_offset(void *fdt, int nodeoffset)
-{
- int level = 0;
- uint32_t tag;
- int offset, nextoffset;
-
- tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
-
- switch (tag) {
- case FDT_END:
- return offset;
-
- case FDT_BEGIN_NODE:
- level++;
- break;
-
- case FDT_END_NODE:
- level--;
- break;
-
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (level >= 0);
-
- return nextoffset;
-}
-
-int fdt_nop_node(void *fdt, int nodeoffset)
-{
- int endoffset;
-
- endoffset = _fdt_node_end_offset(fdt, nodeoffset);
- if (endoffset < 0)
- return endoffset;
-
- _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0),
- endoffset - nodeoffset);
- return 0;
-}
+++ /dev/null
-#ifndef _LIBFDT_H
-#define _LIBFDT_H
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <libfdt_env.h>
-#include <fdt.h>
-
-#define FDT_FIRST_SUPPORTED_VERSION 0x10
-#define FDT_LAST_SUPPORTED_VERSION 0x11
-
-/* Error codes: informative error codes */
-#define FDT_ERR_NOTFOUND 1
- /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
-#define FDT_ERR_EXISTS 2
- /* FDT_ERR_EXISTS: Attemped to create a node or property which
- * already exists */
-#define FDT_ERR_NOSPACE 3
- /* FDT_ERR_NOSPACE: Operation needed to expand the device
- * tree, but its buffer did not have sufficient space to
- * contain the expanded tree. Use fdt_open_into() to move the
- * device tree to a buffer with more space. */
-
-/* Error codes: codes for bad parameters */
-#define FDT_ERR_BADOFFSET 4
- /* FDT_ERR_BADOFFSET: Function was passed a structure block
- * offset which is out-of-bounds, or which points to an
- * unsuitable part of the structure for the operation. */
-#define FDT_ERR_BADPATH 5
- /* FDT_ERR_BADPATH: Function was passed a badly formatted path
- * (e.g. missing a leading / for a function which requires an
- * absolute path) */
-#define FDT_ERR_BADPHANDLE 6
- /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
- * value. phandle values of 0 and -1 are not permitted. */
-#define FDT_ERR_BADSTATE 7
- /* FDT_ERR_BADSTATE: Function was passed an incomplete device
- * tree created by the sequential-write functions, which is
- * not sufficiently complete for the requested operation. */
-
-/* Error codes: codes for bad device tree blobs */
-#define FDT_ERR_TRUNCATED 8
- /* FDT_ERR_TRUNCATED: Structure block of the given device tree
- * ends without an FDT_END tag. */
-#define FDT_ERR_BADMAGIC 9
- /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
- * device tree at all - it is missing the flattened device
- * tree magic number. */
-#define FDT_ERR_BADVERSION 10
- /* FDT_ERR_BADVERSION: Given device tree has a version which
- * can't be handled by the requested operation. For
- * read-write functions, this may mean that fdt_open_into() is
- * required to convert the tree to the expected version. */
-#define FDT_ERR_BADSTRUCTURE 11
- /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
- * structure block or other serious error (e.g. misnested
- * nodes, or subnodes preceding properties). */
-#define FDT_ERR_BADLAYOUT 12
- /* FDT_ERR_BADLAYOUT: For read-write functions, the given
- * device tree has it's sub-blocks in an order that the
- * function can't handle (memory reserve map, then structure,
- * then strings). Use fdt_open_into() to reorganize the tree
- * into a form suitable for the read-write operations. */
-
-/* "Can't happen" error indicating a bug in libfdt */
-#define FDT_ERR_INTERNAL 13
- /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
- * Should never be returned, if it is, it indicates a bug in
- * libfdt itself. */
-
-#define FDT_ERR_MAX 13
-
-/**********************************************************************/
-/* Low-level functions (you probably don't need these) */
-/**********************************************************************/
-
-const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
-static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
-{
- return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
-}
-
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
-
-/**********************************************************************/
-/* Traversal functions */
-/**********************************************************************/
-
-int fdt_next_node(const void *fdt, int offset, int *depth);
-
-/**********************************************************************/
-/* General functions */
-/**********************************************************************/
-
-#define fdt_get_header(fdt, field) \
- (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
-#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
-#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
-#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
-#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
-#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
-#define fdt_version(fdt) (fdt_get_header(fdt, version))
-#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
-#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
-#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
-#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
-
-#define __fdt_set_hdr(name) \
- static inline void fdt_set_##name(void *fdt, uint32_t val) \
- { \
- struct fdt_header *fdth = fdt; \
- fdth->name = cpu_to_fdt32(val); \
- }
-__fdt_set_hdr(magic);
-__fdt_set_hdr(totalsize);
-__fdt_set_hdr(off_dt_struct);
-__fdt_set_hdr(off_dt_strings);
-__fdt_set_hdr(off_mem_rsvmap);
-__fdt_set_hdr(version);
-__fdt_set_hdr(last_comp_version);
-__fdt_set_hdr(boot_cpuid_phys);
-__fdt_set_hdr(size_dt_strings);
-__fdt_set_hdr(size_dt_struct);
-#undef __fdt_set_hdr
-
-/**
- * fdt_check_header - sanity check a device tree or possible device tree
- * @fdt: pointer to data which might be a flattened device tree
- *
- * fdt_check_header() checks that the given buffer contains what
- * appears to be a flattened device tree with sane information in its
- * header.
- *
- * returns:
- * 0, if the buffer appears to contain a valid device tree
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings, as above
- */
-int fdt_check_header(const void *fdt);
-
-/**
- * fdt_move - move a device tree around in memory
- * @fdt: pointer to the device tree to move
- * @buf: pointer to memory where the device is to be moved
- * @bufsize: size of the memory space at buf
- *
- * fdt_move() relocates, if possible, the device tree blob located at
- * fdt to the buffer at buf of size bufsize. The buffer may overlap
- * with the existing device tree blob at fdt. Therefore,
- * fdt_move(fdt, fdt, fdt_totalsize(fdt))
- * should always succeed.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_move(const void *fdt, void *buf, int bufsize);
-
-/**********************************************************************/
-/* Read-only functions */
-/**********************************************************************/
-
-/**
- * fdt_string - retrieve a string from the strings block of a device tree
- * @fdt: pointer to the device tree blob
- * @stroffset: offset of the string within the strings block (native endian)
- *
- * fdt_string() retrieves a pointer to a single string from the
- * strings block of the device tree blob at fdt.
- *
- * returns:
- * a pointer to the string, on success
- * NULL, if stroffset is out of bounds
- */
-const char *fdt_string(const void *fdt, int stroffset);
-
-/**
- * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
- * @fdt: pointer to the device tree blob
- *
- * Returns the number of entries in the device tree blob's memory
- * reservation map. This does not include the terminating 0,0 entry
- * or any other (0,0) entries reserved for expansion.
- *
- * returns:
- * the number of entries
- */
-int fdt_num_mem_rsv(const void *fdt);
-
-/**
- * fdt_get_mem_rsv - retrieve one memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @address, @size: pointers to 64-bit variables
- *
- * On success, *address and *size will contain the address and size of
- * the n-th reserve map entry from the device tree blob, in
- * native-endian format.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
-
-/**
- * fdt_subnode_offset_namelen - find a subnode based on substring
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_subnode_offset(), but only examine the first
- * namelen characters of name for matching the subnode name. This is
- * useful for finding subnodes based on a portion of a larger string,
- * such as a full path.
- */
-int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
- const char *name, int namelen);
-/**
- * fdt_subnode_offset - find a subnode of a given node
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- *
- * fdt_subnode_offset() finds a subnode of the node at structure block
- * offset parentoffset with the given name. name may include a unit
- * address, in which case fdt_subnode_offset() will find the subnode
- * with that unit address, or the unit address may be omitted, in
- * which case fdt_subnode_offset() will find an arbitrary subnode
- * whose name excluding unit address matches the given name.
- *
- * returns:
- * structure block offset of the requested subnode (>=0), on success
- * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
- * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
-
-/**
- * fdt_path_offset - find a tree node by its full path
- * @fdt: pointer to the device tree blob
- * @path: full path of the node to locate
- *
- * fdt_path_offset() finds a node of a given path in the device tree.
- * Each path component may omit the unit address portion, but the
- * results of this are undefined if any such path component is
- * ambiguous (that is if there are multiple nodes at the relevant
- * level matching the given component, differentiated only by unit
- * address).
- *
- * returns:
- * structure block offset of the node with the requested path (>=0), on success
- * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
- * -FDT_ERR_NOTFOUND, if the requested node does not exist
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_path_offset(const void *fdt, const char *path);
-
-/**
- * fdt_get_name - retrieve the name of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of the starting node
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_name() retrieves the name (including unit address) of the
- * device tree node at structure block offset nodeoffset. If lenp is
- * non-NULL, the length of this name is also returned, in the integer
- * pointed to by lenp.
- *
- * returns:
- * pointer to the node's name, on success
- * If lenp is non-NULL, *lenp contains the length of that name (>=0)
- * NULL, on error
- * if lenp is non-NULL *lenp contains an error code (<0):
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
-
-/**
- * fdt_get_property - find a given property in a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_property() retrieves a pointer to the fdt_property
- * structure within the device tree blob corresponding to the property
- * named 'name' of the node at offset nodeoffset. If lenp is
- * non-NULL, the length of the property value is also returned, in the
- * integer pointed to by lenp.
- *
- * returns:
- * pointer to the structure representing the property
- * if lenp is non-NULL, *lenp contains the length of the property
- * value (>=0)
- * NULL, on error
- * if lenp is non-NULL, *lenp contains an error code (<0):
- * -FDT_ERR_NOTFOUND, node does not have named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
- const char *name, int *lenp);
-static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
- const char *name,
- int *lenp)
-{
- return (struct fdt_property *)(uintptr_t)
- fdt_get_property(fdt, nodeoffset, name, lenp);
-}
-
-/**
- * fdt_getprop - retrieve the value of a given property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_getprop() retrieves a pointer to the value of the property
- * named 'name' of the node at offset nodeoffset (this will be a
- * pointer to within the device blob itself, not a copy of the value).
- * If lenp is non-NULL, the length of the property value is also
- * returned, in the integer pointed to by lenp.
- *
- * returns:
- * pointer to the property's value
- * if lenp is non-NULL, *lenp contains the length of the property
- * value (>=0)
- * NULL, on error
- * if lenp is non-NULL, *lenp contains an error code (<0):
- * -FDT_ERR_NOTFOUND, node does not have named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-const void *fdt_getprop(const void *fdt, int nodeoffset,
- const char *name, int *lenp);
-static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
- const char *name, int *lenp)
-{
- return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
-}
-
-/**
- * fdt_get_phandle - retrieve the phandle of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of the node
- *
- * fdt_get_phandle() retrieves the phandle of the device tree node at
- * structure block offset nodeoffset.
- *
- * returns:
- * the phandle of the node at nodeoffset, on success (!= 0, != -1)
- * 0, if the node has no phandle, or another error occurs
- */
-uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
-
-/**
- * fdt_get_path - determine the full path of a node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose path to find
- * @buf: character buffer to contain the returned path (will be overwritten)
- * @buflen: size of the character buffer at buf
- *
- * fdt_get_path() computes the full path of the node at offset
- * nodeoffset, and records that path in the buffer at buf.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- * 0, on success
- * buf contains the absolute path of the node at
- * nodeoffset, as a NUL-terminated string.
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
- * characters and will not fit in the given buffer.
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
-
-/**
- * fdt_supernode_atdepth_offset - find a specific ancestor of a node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- * @supernodedepth: depth of the ancestor to find
- * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_supernode_atdepth_offset() finds an ancestor of the given node
- * at a specific depth from the root (where the root itself has depth
- * 0, its immediate subnodes depth 1 and so forth). So
- * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
- * will always return 0, the offset of the root node. If the node at
- * nodeoffset has depth D, then:
- * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
- * will return nodeoffset itself.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
-
- * structure block offset of the node at node offset's ancestor
- * of depth supernodedepth (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
-* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
- int supernodedepth, int *nodedepth);
-
-/**
- * fdt_node_depth - find the depth of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- *
- * fdt_node_depth() finds the depth of a given node. The root node
- * has depth 0, its immediate subnodes depth 1 and so forth.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- * depth of the node at nodeoffset (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_depth(const void *fdt, int nodeoffset);
-
-/**
- * fdt_parent_offset - find the parent of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- *
- * fdt_parent_offset() locates the parent node of a given node (that
- * is, it finds the offset of the node which contains the node at
- * nodeoffset as a subnode).
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset, *twice*.
- *
- * returns:
- * structure block offset of the parent of the node at nodeoffset
- * (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_parent_offset(const void *fdt, int nodeoffset);
-
-/**
- * fdt_node_offset_by_prop_value - find nodes with a given property value
- * @fdt: pointer to the device tree blob
- * @startoffset: only find nodes after this offset
- * @propname: property name to check
- * @propval: property value to search for
- * @proplen: length of the value in propval
- *
- * fdt_node_offset_by_prop_value() returns the offset of the first
- * node after startoffset, which has a property named propname whose
- * value is of length proplen and has value equal to propval; or if
- * startoffset is -1, the very first such node in the tree.
- *
- * To iterate through all nodes matching the criterion, the following
- * idiom can be used:
- * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
- * propval, proplen);
- * while (offset != -FDT_ERR_NOTFOUND) {
- * // other code here
- * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
- * propval, proplen);
- * }
- *
- * Note the -1 in the first call to the function, if 0 is used here
- * instead, the function will never locate the root node, even if it
- * matches the criterion.
- *
- * returns:
- * structure block offset of the located node (>= 0, >startoffset),
- * on success
- * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
- * tree after startoffset
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
- const char *propname,
- const void *propval, int proplen);
-
-/**
- * fdt_node_offset_by_phandle - find the node with a given phandle
- * @fdt: pointer to the device tree blob
- * @phandle: phandle value
- *
- * fdt_node_offset_by_phandle() returns the offset of the node
- * which has the given phandle value. If there is more than one node
- * in the tree with the given phandle (an invalid tree), results are
- * undefined.
- *
- * returns:
- * structure block offset of the located node (>= 0), on success
- * -FDT_ERR_NOTFOUND, no node with that phandle exists
- * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
-
-/**
- * fdt_node_check_compatible: check a node's compatible property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of a tree node
- * @compatible: string to match against
- *
- *
- * fdt_node_check_compatible() returns 0 if the given node contains a
- * 'compatible' property with the given string as one of its elements,
- * it returns non-zero otherwise, or on error.
- *
- * returns:
- * 0, if the node has a 'compatible' property listing the given string
- * 1, if the node has a 'compatible' property, but it does not list
- * the given string
- * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
- * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_check_compatible(const void *fdt, int nodeoffset,
- const char *compatible);
-
-/**
- * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
- * @fdt: pointer to the device tree blob
- * @startoffset: only find nodes after this offset
- * @compatible: 'compatible' string to match against
- *
- * fdt_node_offset_by_compatible() returns the offset of the first
- * node after startoffset, which has a 'compatible' property which
- * lists the given compatible string; or if startoffset is -1, the
- * very first such node in the tree.
- *
- * To iterate through all nodes matching the criterion, the following
- * idiom can be used:
- * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
- * while (offset != -FDT_ERR_NOTFOUND) {
- * // other code here
- * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
- * }
- *
- * Note the -1 in the first call to the function, if 0 is used here
- * instead, the function will never locate the root node, even if it
- * matches the criterion.
- *
- * returns:
- * structure block offset of the located node (>= 0, >startoffset),
- * on success
- * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
- * tree after startoffset
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
- const char *compatible);
-
-/**********************************************************************/
-/* Write-in-place functions */
-/**********************************************************************/
-
-/**
- * fdt_setprop_inplace - change a property's value, but not its size
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: pointer to data to replace the property value with
- * @len: length of the property value
- *
- * fdt_setprop_inplace() replaces the value of a given property with
- * the data in val, of length len. This function cannot change the
- * size of a property, and so will only work if len is equal to the
- * current length of the property.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
- const void *val, int len);
-
-/**
- * fdt_setprop_inplace_cell - change the value of a single-cell property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: cell (32-bit integer) value to replace the property with
- *
- * fdt_setprop_inplace_cell() replaces the value of a given property
- * with the 32-bit integer cell value in val, converting val to
- * big-endian if necessary. This function cannot change the size of a
- * property, and so will only work if the property already exists and
- * has length 4.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
- const char *name, uint32_t val)
-{
- val = cpu_to_fdt32(val);
- return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
-}
-
-/**
- * fdt_nop_property - replace a property with nop tags
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to nop
- * @name: name of the property to nop
- *
- * fdt_nop_property() will replace a given property's representation
- * in the blob with FDT_NOP tags, effectively removing it from the
- * tree.
- *
- * This function will alter only the bytes in the blob which contain
- * the property, and will not alter or move any other part of the
- * tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_nop_node - replace a node (subtree) with nop tags
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to nop
- *
- * fdt_nop_node() will replace a given node's representation in the
- * blob, including all its subnodes, if any, with FDT_NOP tags,
- * effectively removing it from the tree.
- *
- * This function will alter only the bytes in the blob which contain
- * the node and its properties and subnodes, and will not alter or
- * move any other part of the tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_nop_node(void *fdt, int nodeoffset);
-
-/**********************************************************************/
-/* Sequential write functions */
-/**********************************************************************/
-
-int fdt_create(void *buf, int bufsize);
-int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
-int fdt_finish_reservemap(void *fdt);
-int fdt_begin_node(void *fdt, const char *name);
-int fdt_property(void *fdt, const char *name, const void *val, int len);
-static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
-{
- val = cpu_to_fdt32(val);
- return fdt_property(fdt, name, &val, sizeof(val));
-}
-#define fdt_property_string(fdt, name, str) \
- fdt_property(fdt, name, str, strlen(str)+1)
-int fdt_end_node(void *fdt);
-int fdt_finish(void *fdt);
-
-/**********************************************************************/
-/* Read-write functions */
-/**********************************************************************/
-
-int fdt_open_into(const void *fdt, void *buf, int bufsize);
-int fdt_pack(void *fdt);
-
-/**
- * fdt_add_mem_rsv - add one memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @address, @size: 64-bit values (native endian)
- *
- * Adds a reserve map entry to the given blob reserving a region at
- * address address of length size.
- *
- * This function will insert data into the reserve map and will
- * therefore change the indexes of some entries in the table.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new reservation entry
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
-
-/**
- * fdt_del_mem_rsv - remove a memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @n: entry to remove
- *
- * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
- * the blob.
- *
- * This function will delete data from the reservation table and will
- * therefore change the indexes of some entries in the table.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
- * are less than n+1 reserve map entries)
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_del_mem_rsv(void *fdt, int n);
-
-/**
- * fdt_set_name - change the name of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of a node
- * @name: name to give the node
- *
- * fdt_set_name() replaces the name (including unit address, if any)
- * of the given node with the given string. NOTE: this function can't
- * efficiently check if the new name is unique amongst the given
- * node's siblings; results are undefined if this function is invoked
- * with a name equal to one of the given node's siblings.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
- * to contain the new name
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_set_name(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_setprop - create or change a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: pointer to data to set the property value to
- * @len: length of the property value
- *
- * fdt_setprop() sets the value of the named property in the given
- * node to the given value and length, creating the property if it
- * does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new property value
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
- const void *val, int len);
-
-/**
- * fdt_setprop_cell - set a property to a single cell value
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 32-bit integer value for the property (native endian)
- *
- * fdt_setprop_cell() sets the value of the named property in the
- * given node to the given cell value (converting to big-endian if
- * necessary), or creates a new property with that value if it does
- * not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new property value
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
- uint32_t val)
-{
- val = cpu_to_fdt32(val);
- return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
-}
-
-/**
- * fdt_setprop_string - set a property to a string value
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @str: string value for the property
- *
- * fdt_setprop_string() sets the value of the named property in the
- * given node to the given string value (using the length of the
- * string to determine the new length of the property), or creates a
- * new property with that value if it does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new property value
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-#define fdt_setprop_string(fdt, nodeoffset, name, str) \
- fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
-
-/**
- * fdt_delprop - delete a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to nop
- * @name: name of the property to nop
- *
- * fdt_del_property() will delete the given property.
- *
- * This function will delete data from the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_delprop(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_add_subnode_namelen - creates a new node based on substring
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_add_subnode(), but use only the first namelen
- * characters of name as the name of the new node. This is useful for
- * creating subnodes based on a portion of a larger string, such as a
- * full path.
- */
-int fdt_add_subnode_namelen(void *fdt, int parentoffset,
- const char *name, int namelen);
-
-/**
- * fdt_add_subnode - creates a new node
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- *
- * fdt_add_subnode() creates a new node as a subnode of the node at
- * structure block offset parentoffset, with the given name (which
- * should include the unit address, if any).
- *
- * This function will insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
-
- * returns:
- * structure block offset of the created nodeequested subnode (>=0), on success
- * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
- * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
- * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
- * the given name
- * -FDT_ERR_NOSPACE, if there is insufficient free space in the
- * blob to contain the new node
- * -FDT_ERR_NOSPACE
- * -FDT_ERR_BADLAYOUT
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
-
-/**
- * fdt_del_node - delete a node (subtree)
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to nop
- *
- * fdt_del_node() will remove the given node, including all its
- * subnodes if any, from the blob.
- *
- * This function will delete data from the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_del_node(void *fdt, int nodeoffset);
-
-/**********************************************************************/
-/* Debugging / informational functions */
-/**********************************************************************/
-
-const char *fdt_strerror(int errval);
-
-#endif /* _LIBFDT_H */
+++ /dev/null
-#ifndef _LIBFDT_INTERNAL_H
-#define _LIBFDT_INTERNAL_H
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <fdt.h>
-
-#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
-#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
-
-#define FDT_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = fdt_check_header(fdt)) != 0) \
- return err; \
- }
-
-uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
-int _fdt_check_node_offset(const void *fdt, int offset);
-const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
-int _fdt_node_end_offset(void *fdt, int nodeoffset);
-
-static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
-{
- return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
-}
-
-static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
-{
- return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
-}
-
-static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
-{
- const struct fdt_reserve_entry *rsv_table =
- (const struct fdt_reserve_entry *)
- ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
-
- return rsv_table + n;
-}
-static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
-{
- return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
-}
-
-#define FDT_SW_MAGIC (~FDT_MAGIC)
-
-#endif /* _LIBFDT_INTERNAL_H */
#include "types.h"
#include "io.h"
#include "stdio.h"
-#include "libfdt/libfdt.h"
+#include <libfdt.h>
BSS_STACK(4*1024);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:14 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:04 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:29 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:22 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
#
# LED drivers
#
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:57 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:04 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:07 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:10 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:12 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Feb 6 09:48:53 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon Apr 20 11:06:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
+CONFIG_PPC_MPC5200_GPIO=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MPC52xx_PSC=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:37 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:40:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
CONFIG_KSI8560=y
-# CONFIG_STX_GP3 is not set
+CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_TQM8548=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
+CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_FSL_ULI1575=y
CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SERIAL_CPM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
+CONFIG_SERIAL_QE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_I2C_CPM is not set
+CONFIG_I2C_CPM=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:41:18 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
+CONFIG_KSI8560=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_SBC8548=y
+# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_MPC8xxx_GPIO=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_GIANFAR=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=m
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
(exec_stk != EXSTACK_DISABLE_X) : 0)
#else
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+ set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
#endif /* __powerpc64__ */
extern int dcache_bsize;
*/
#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000)
-/* This indicates that the processor uses the wrong opcode for tlbilx
- * instructions. During the ISA 2.06 development the opcode for tlbilx
- * changed and some early implementations used to old opcode
- */
-#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000)
-
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
*
*/
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
#define PPC_INST_STSWI 0x7c0005aa
#define PPC_INST_STSWX 0x7c00052a
#define PPC_INST_TLBILX 0x7c000024
-#define PPC_INST_TLBILX_EARLY 0x7c000626
#define PPC_INST_WAIT 0x7c00007c
/* macros to insert fields into opcodes */
#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI)
#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI)
#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \
- __PPC_T_TLB(t) | \
- __PPC_RA(a) | __PPC_RB(b))
+ __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b)
#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b)
#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
-
-#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \
- __PPC_T_TLB(t) | \
- __PPC_RA(a) | __PPC_RB(b))
-#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b)
-#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b)
-#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b)
#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
__PPC_WC(w))
#ifndef _ASM_POWERPC_PPC_ASM_H
#define _ASM_POWERPC_PPC_ASM_H
+#include <linux/init.h>
#include <linux/stringify.h>
#include <asm/asm-compat.h>
#include <asm/processor.h>
GLUE(.,name):
#define _INIT_GLOBAL(name) \
- .section ".text.init.refok"; \
+ __REF; \
.align 2 ; \
.globl name; \
.globl GLUE(.,name); \
GLUE(.,name):
#define _INIT_STATIC(name) \
- .section ".text.init.refok"; \
+ __REF; \
.align 2 ; \
.section ".opd","aw"; \
name: \
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power5+",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
{ /* Power6 */
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power6",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power6",
},
{ /* 2.06-compliant processor, i.e. Power7 "architected" mode */
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power7",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
.platform = "power7",
},
{ /* Power7 */
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
- MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE,
+ MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
* and, in that case, keep the current value for
* oprofile_cpu_type.
*/
- if (old.oprofile_cpu_type == NULL)
- t->oprofile_cpu_type = s->oprofile_cpu_type;
+ if (old.oprofile_cpu_type == NULL) {
+ t->oprofile_cpu_type = old.oprofile_cpu_type;
+ t->oprofile_type = old.oprofile_type;
+ }
}
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
*
*/
+#include <linux/init.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
mtspr SPRN_DBAT##n##L,RB; \
1:
- .section .text.head, "ax"
+ __HEAD
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "head_32.S",N_SO,0,0,0f
0:
*
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
*
* This is all going to change RSN when we add bi_recs....... -- Dan
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
* option) any later version.
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
* r7 - End of kernel command line string
*
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
/*
*
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#else
#define DO_8xx_CPU6(val, reg)
#endif
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
* option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
* r7 - End of kernel command line string
*
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
/*
struct device_node *p;
const u32 *intspec, *tmp, *addr;
u32 intsize, intlen;
- int res;
+ int res = -EINVAL;
DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
/* Get size of interrupt specifier */
tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- of_node_put(p);
- return -EINVAL;
- }
+ if (tmp == NULL)
+ goto out;
intsize = *tmp;
DBG(" intsize=%d intlen=%d\n", intsize, intlen);
/* Check index */
if ((index + 1) * intsize > intlen)
- return -EINVAL;
+ goto out;
/* Get new specifier and map it */
res = of_irq_map_raw(p, intspec + index * intsize, intsize,
addr, out_irq);
+out:
of_node_put(p);
return res;
}
/* Text and gots */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
- *(.text.head)
+ HEAD_TEXT
_text = .;
- *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
+ /* careful! __ftr_alt_* sections need to be close to .text */
+ *(.text .fixup __ftr_alt_* .ref.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
}
#ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
{
/* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR))
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
- BEGIN_MMU_FTR_SECTION_NESTED(96)
- PPC_TLBILX_ALL(0,r3)
- MMU_FTR_SECTION_ELSE_NESTED(96)
- PPC_TLBILX_ALL_EARLY(0,r3)
- ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
+ PPC_TLBILX_ALL(0,0)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
- BEGIN_MMU_FTR_SECTION_NESTED(96)
PPC_TLBILX_PID(0,0)
- MMU_FTR_SECTION_ELSE_NESTED(96)
- PPC_TLBILX_PID_EARLY(0,0)
- ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
- BEGIN_MMU_FTR_SECTION_NESTED(96)
PPC_TLBILX_VA(0,r3)
- MMU_FTR_SECTION_ELSE_NESTED(96)
- PPC_TLBILX_VA_EARLY(0,r3)
- ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
1: wrtee r10
blr
-#elif
+#else
#error Unsupported processor type !
#endif
config PPC_CELL_NATIVE
bool
select PPC_CELL_COMMON
- select PPC_OF_PLATFORM_PCI
select MPIC
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
bool "IBM Cell Blade"
depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
+ select PPC_OF_PLATFORM_PCI
+ select PCI
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
+ select PPC_OF_PLATFORM_PCI
+ select PCI
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
select USB_OHCI_BIG_ENDIAN_MMIO
if (!machine_is(mpc86xx_hpcd))
return;
- /* Interrupt Disable, Needed when SATA disabled */
- pci_read_config_word(dev, PCI_COMMAND, &temp);
- temp |= 1<<10;
- pci_write_config_word(dev, PCI_COMMAND, temp);
-
pci_read_config_byte(dev, 0x83, &c);
c |= 0x80;
pci_write_config_byte(dev, 0x83, c);
#include "pasemi.h"
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
/* SDC reset register, must be pre-mapped at reset time */
static void __iomem *reset_reg;
*
*/
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
{
int result;
int file;
DEFINE_MUTEX(ps3_gpu_mutex);
EXPORT_SYMBOL_GPL(ps3_gpu_mutex);
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
static union ps3_firmware_version ps3_firmware_version;
void ps3_get_firmware_version(union ps3_firmware_version *v)
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
};
struct rio_priv {
+ struct device *dev;
void __iomem *regs_win;
struct rio_atmu_regs __iomem *atmu_regs;
struct rio_atmu_regs __iomem *maint_atmu_regs;
for (i = 0; i < priv->msg_tx_ring.size; i++) {
priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
if (!priv->msg_tx_ring.virt_buffer[i]) {
rc = -ENOMEM;
for (j = 0; j < priv->msg_tx_ring.size; j++)
if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(NULL,
+ dma_free_coherent(priv->dev,
RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.
virt_buffer[j],
}
/* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
&priv->msg_tx_ring.phys, GFP_KERNEL);
if (!priv->msg_tx_ring.virt) {
return rc;
out_irq:
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
&priv->msg_rx_ring.phys, GFP_KERNEL);
if (!priv->msg_rx_ring.virt) {
rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport);
if (rc < 0) {
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
goto out;
out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
}
/* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+ priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
if (!priv->dbell_ring.virt) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
"dbell_rx", (void *)mport);
if (rc < 0) {
iounmap(priv->dbell_win);
- dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+ dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
priv->dbell_ring.virt, priv->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
strcpy(port->name, "RIO0 mport");
+ priv->dev = &dev->dev;
+
port->ops = ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
/*
* Ops list
*/
-static DEFINE_SPINLOCK(appldata_ops_lock);
+static DEFINE_MUTEX(appldata_ops_mutex);
static LIST_HEAD(appldata_ops_list);
i = 0;
get_online_cpus();
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
if (ops->active == 1) {
ops->callback(ops->data);
}
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
put_online_cpus();
}
struct list_head *lh;
found = 0;
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
if (&tmp_ops->ctl_table[2] == ctl) {
}
}
if (!found) {
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
return -ENODEV;
}
ops = ctl->data;
if (!try_module_get(ops->owner)) { // protect this function
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
return -ENODEV;
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
if (!*lenp || *ppos) {
*lenp = 0;
return -EFAULT;
}
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
if ((buf[0] == '1') && (ops->active == 0)) {
// protect work queue callback
if (!try_module_get(ops->owner)) {
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
module_put(ops->owner);
return -ENODEV;
}
"failed with rc=%d\n", ops->name, rc);
module_put(ops->owner);
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
out:
*lenp = len;
*ppos += len;
if (!ops->ctl_table)
return -ENOMEM;
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_add(&ops->list, &appldata_ops_list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
ops->ctl_table[0].procname = appldata_proc_name;
ops->ctl_table[0].maxlen = 0;
goto out;
return 0;
out:
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_del(&ops->list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
kfree(ops->ctl_table);
return -ENOMEM;
}
*/
void appldata_unregister_ops(struct appldata_ops *ops)
{
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_del(&ops->list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
unregister_sysctl_table(ops->sysctl_header);
kfree(ops->ctl_table);
}
{
/*
* don't put large structures on the stack, we are
- * serialized through the appldata_ops_lock and can use static
+ * serialized through the appldata_ops_mutex and can use static
*/
static struct sysinfo val;
unsigned long ev[NR_VM_EVENT_ITEMS];
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Wed Feb 11 10:07:16 2009
+# Linux kernel version: 2.6.30-rc3
+# Thu Apr 23 09:29:52 2009
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_PGSTE=y
CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_S390=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# I/O subsystem configuration
#
-CONFIG_MACHCHK_WARNING=y
CONFIG_QDIO=y
CONFIG_CHSC_SCH=m
CONFIG_KEXEC=y
# CONFIG_ZFCPDUMP is not set
CONFIG_S390_GUEST=y
+CONFIG_SECCOMP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_AUXDISPLAY is not set
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_EXOFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_AES_S390 is not set
CONFIG_S390_PRNG=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_NLATTR=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
return __div(cputime, 4096000000ULL / USER_HZ);
}
+cputime64_t s390_get_idle_time(int cpu);
+
+#define arch_idle_time(cpu) s390_get_idle_time(cpu)
+
#endif /* _S390_CPUTIME_H */
*
*/
+#include <linux/init.h>
#include <asm/setup.h>
#include <asm/lowcore.h>
#include <asm/asm-offsets.h>
#define ARCH_OFFSET 0
#endif
-.section ".text.head","ax"
+__HEAD
#ifndef CONFIG_IPL
.org 0
.long 0x00080000,0x80000000+startup # Just a restart PSW
#include <asm/ebcdic.h>
#include <asm/reset.h>
#include <asm/sclp.h>
+#include <asm/sigp.h>
#include <asm/checksum.h>
#define IPL_PARM_BLOCK_VERSION 0
. = 0x00000000;
.text : {
_text = .; /* Text and read-only data */
- *(.text.head)
- TEXT_TEXT
+ HEAD_TEXT
+ TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
}
}
+cputime64_t s390_get_idle_time(int cpu)
+{
+ struct s390_idle_data *idle;
+ unsigned long long now, idle_time, idle_enter;
+
+ idle = &per_cpu(s390_idle, cpu);
+ spin_lock(&idle->lock);
+ now = get_clock();
+ idle_time = 0;
+ idle_enter = idle->idle_enter;
+ if (idle_enter != 0ULL && idle_enter < now)
+ idle_time = now - idle_enter;
+ spin_unlock(&idle->lock);
+ return idle_time;
+}
+
/*
* Sorted add to a list. List is linear searched until first bigger
* element is found.
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:15:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 19:17:56 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
-# CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
+CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
#
# Timer and clock configuration
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
struct pt_regs {
unsigned long long pc;
unsigned long long sr;
- unsigned long long syscall_nr;
+ long long syscall_nr;
unsigned long long regs[63];
unsigned long long tregs[8];
unsigned long long pad[2];
* for more details.
*/
#include <linux/errno.h>
+#include <linux/init.h>
#include <linux/sys.h>
#include <cpu/registers.h>
#include <asm/processor.h>
/*
- * --- .text.init Section
+ * --- .init.text Section
*/
- .section .text.init, "ax"
+ __INIT
/*
* void trap_init (void)
*
* Head.S contains the SH exception handlers and startup code.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
1:
.skip PAGE_SIZE - empty_zero_page - 1b
- .section .text.head, "ax"
+ __HEAD
/*
* Condition at the entry of _stext:
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+
+#include <linux/init.h>
+
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/tlb.h>
fpu_in_use: .quad 0
- .section .text.head, "ax"
+ __HEAD
.balign L1_CACHE_BYTES
/*
* Condition at the entry of __stext:
} = 0
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
} = 0
.text : C_PHYS(.text) {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
*(.text64)
*(.text..SHmedia32)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Thu Jan 8 16:45:44 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 04:04:46 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_PCI=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan 2 18:14:26 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 02:03:07 2009
#
+CONFIG_64BIT=y
CONFIG_SPARC=y
+# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITS=64
-CONFIG_64BIT=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_CASSINI=m
+CONFIG_SUNGEM=m
+# CONFIG_CASSINI is not set
CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=m
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_N2RNG=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .section .text.head,"ax"
+ __HEAD
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
nop
/* The code above should be at beginning and we have to take care about
- * short jumps, as branching to .text.init section from .text is usually
+ * short jumps, as branching to .init.text section from .text is usually
* impossible */
__INIT
/* Acquire boot time privileged register values, this will help debugging.
jmpl %g2 + %g0, %g0
nop
- .section .text.init.refok
+ __REF
sun4u_init:
BRANCH_IF_SUN4V(g1, sun4v_init)
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
.text TEXTSTART :
{
_text = .;
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
config NUMA_MIGRATE_IRQ_DESC
bool "Move irq desc when changing irq smp_affinity"
depends on SPARSE_IRQ && NUMA
+ depends on BROKEN
default n
---help---
This enables moving irq_desc to cpu/node that irq will use handled.
config NR_CPUS
int "Maximum number of CPUs" if SMP && !MAXSMP
+ range 2 8 if SMP && X86_32 && !X86_BIGSMP
range 2 512 if SMP && !MAXSMP
default "1" if !SMP
default "4096" if MAXSMP
boot := arch/x86/boot
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
PHONY += bzImage $(BOOT_TARGETS)
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
+PHONY += install
+install:
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
enum mcp_flags {
MCP_TIMESTAMP = (1 << 0), /* log time stamp */
MCP_UC = (1 << 1), /* log uncorrected errors */
+ MCP_DONTLOG = (1 << 2), /* only clear, don't log */
};
extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
static inline void __native_flush_tlb(void)
{
- write_cr3(read_cr3());
+ native_write_cr3(native_read_cr3());
}
static inline void __native_flush_tlb_global(void)
*/
raw_local_irq_save(flags);
- cr4 = read_cr4();
+ cr4 = native_read_cr4();
/* clear PGE */
- write_cr4(cr4 & ~X86_CR4_PGE);
+ native_write_cr4(cr4 & ~X86_CR4_PGE);
/* write old PGE again and flush TLBs */
- write_cr4(cr4);
+ native_write_cr4(cr4);
raw_local_irq_restore(flags);
}
}
struct pci_bus;
-void set_pci_bus_resources_arch_default(struct pci_bus *b);
+void x86_pci_root_bus_res_quirks(struct pci_bus *b);
#ifdef CONFIG_SMP
#define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)
#define IVHD_DEV_EXT_SELECT 0x46
#define IVHD_DEV_EXT_SELECT_RANGE 0x47
-#define IVHD_FLAG_HT_TUN_EN 0x00
-#define IVHD_FLAG_PASSPW_EN 0x01
-#define IVHD_FLAG_RESPASSPW_EN 0x02
-#define IVHD_FLAG_ISOC_EN 0x03
+#define IVHD_FLAG_HT_TUN_EN_MASK 0x01
+#define IVHD_FLAG_PASSPW_EN_MASK 0x02
+#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04
+#define IVHD_FLAG_ISOC_EN_MASK 0x08
#define IVMD_FLAG_EXCL_RANGE 0x08
#define IVMD_FLAG_UNITY_MAP 0x01
* First set the recommended feature enable bits from ACPI
* into the IOMMU control registers
*/
- h->flags & IVHD_FLAG_HT_TUN_EN ?
+ h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
- h->flags & IVHD_FLAG_PASSPW_EN ?
+ h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
- h->flags & IVHD_FLAG_RESPASSPW_EN ?
+ h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
- h->flags & IVHD_FLAG_ISOC_EN ?
+ h->flags & IVHD_FLAG_ISOC_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
iommu_feature_disable(iommu, CONTROL_ISOC_EN);
{
int ret;
struct msi_msg msg;
+ struct irq_desc *desc = irq_to_desc(irq);
ret = msi_compose_msg(NULL, irq, &msg);
if (ret < 0)
return ret;
hpet_msi_write(irq, &msg);
+ desc->status |= IRQ_MOVE_PCNTXT;
set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
"edge");
if (!prev_nmi_count)
goto error;
- alloc_cpumask_var(&backtrace_mask, GFP_KERNEL);
+ alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
printk(KERN_INFO "Testing NMI watchdog ... ");
#ifdef CONFIG_SMP
touched = 1;
}
- if (cpumask_test_cpu(cpu, backtrace_mask)) {
+ /* We can be called before check_nmi_watchdog, hence NULL check. */
+ if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
static DEFINE_SPINLOCK(lock); /* Serialise the printks */
spin_lock(&lock);
#include <linux/timer.h>
#include <linux/cpu.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
static enum uv_system_type uv_system_type;
+static int early_get_nodeid(void)
+{
+ union uvh_node_id_u node_id;
+ unsigned long *mmr;
+
+ mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
+ node_id.v = *mmr;
+ early_iounmap(mmr, sizeof(*mmr));
+ return node_id.s.node_id;
+}
+
static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
else if (!strcmp(oem_table_id, "UVX"))
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
+ __get_cpu_var(x2apic_extra_bits) =
+ early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
if (uv_node_to_blade[nid] >= 0)
continue;
paddr = node_start_pfn(nid) << PAGE_SHIFT;
+ paddr = uv_soc_phys_ram_to_gpa(paddr);
pnode = (paddr >> m_val) & pnode_mask;
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
load_TR_desc();
load_LDT(&init_mm.context);
+ t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+
#ifdef CONFIG_DOUBLEFAULT
/* Set up doublefault TSS pointer in the GDT */
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
struct acpi_cpufreq_data {
struct acpi_processor_performance *acpi_data;
struct cpufreq_frequency_table *freq_table;
- unsigned int max_freq;
unsigned int resume;
unsigned int cpu_feature;
- u64 saved_aperf, saved_mperf;
};
static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
+struct acpi_msr_data {
+ u64 saved_aperf, saved_mperf;
+};
+
+static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+
DEFINE_TRACE(power_mark);
/* acpi_perf_data is a pointer to percpu data. */
return 0;
cur.aperf.whole = readin.aperf.whole -
- per_cpu(drv_data, cpu)->saved_aperf;
+ per_cpu(msr_data, cpu).saved_aperf;
cur.mperf.whole = readin.mperf.whole -
- per_cpu(drv_data, cpu)->saved_mperf;
- per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
- per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+ per_cpu(msr_data, cpu).saved_mperf;
+ per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
+ per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
#ifdef __i386__
/*
#endif
- retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100;
+ retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
return retval;
}
/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
- static int print_once;
policy->cpuinfo.transition_latency = 20 * 1000;
- if (!print_once) {
- print_once = 1;
- printk(KERN_INFO "Capping off P-state tranision latency"
- " at 20 uS\n");
- }
+ printk_once(KERN_INFO "Capping off P-state tranision"
+ " latency at 20 uS\n");
}
- data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
for (i = 0; i < perf->state_count; i++) {
if (i > 0 && perf->states[i].core_frequency >=
if (result)
goto err_freqfree;
+ if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+ printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
/* Current speed is unknown and not detectable by IO port */
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
*/
-
- mce_log(&m);
- add_taint(TAINT_MACHINE_CHECK);
+ if (!(flags & MCP_DONTLOG)) {
+ mce_log(&m);
+ add_taint(TAINT_MACHINE_CHECK);
+ }
/*
* Clear state for this bank.
*/
static int check_interval = 5 * 60; /* 5 minutes */
-static int next_interval; /* in jiffies */
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
static void mcheck_timer(unsigned long);
static DEFINE_PER_CPU(struct timer_list, mce_timer);
static void mcheck_timer(unsigned long data)
{
struct timer_list *t = &per_cpu(mce_timer, data);
+ int *n;
WARN_ON(smp_processor_id() != data);
* Alert userspace if needed. If we logged an MCE, reduce the
* polling interval, otherwise increase the polling interval.
*/
+ n = &__get_cpu_var(next_interval);
if (mce_notify_user()) {
- next_interval = max(next_interval/2, HZ/100);
+ *n = max(*n/2, HZ/100);
} else {
- next_interval = min(next_interval * 2,
- (int)round_jiffies_relative(check_interval*HZ));
+ *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
}
- t->expires = jiffies + next_interval;
+ t->expires = jiffies + *n;
add_timer(t);
}
* Log the machine checks left over from the previous reset.
*/
bitmap_fill(all_banks, MAX_NR_BANKS);
- machine_check_poll(MCP_UC, &all_banks);
+ machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
set_in_cr4(X86_CR4_MCE);
static void mce_init_timer(void)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
+ int *n = &__get_cpu_var(next_interval);
- /* data race harmless because everyone sets to the same value */
- if (!next_interval)
- next_interval = check_interval * HZ;
- if (!next_interval)
+ *n = check_interval * HZ;
+ if (!*n)
return;
setup_timer(t, mcheck_timer, smp_processor_id());
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies + *n);
add_timer(t);
}
/* Reinit MCEs after user configuration changes */
static void mce_restart(void)
{
- next_interval = check_interval * HZ;
on_each_cpu(mce_cpu_restart, NULL, 1);
}
break;
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies +
+ __get_cpu_var(next_interval));
add_timer_on(t, cpu);
smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
break;
if (c->x86_max_cores * smp_num_siblings > 1) {
seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
seq_printf(m, "siblings\t: %d\n",
- cpumask_weight(cpu_sibling_mask(cpu)));
+ cpumask_weight(cpu_core_mask(cpu)));
seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
seq_printf(m, "apicid\t\t: %d\n", c->apicid);
GLOBAL(return_to_handler)
subq $80, %rsp
+ /* Save the return values */
movq %rax, (%rsp)
- movq %rcx, 8(%rsp)
- movq %rdx, 16(%rsp)
- movq %rsi, 24(%rsp)
- movq %rdi, 32(%rsp)
- movq %r8, 40(%rsp)
- movq %r9, 48(%rsp)
- movq %r10, 56(%rsp)
- movq %r11, 64(%rsp)
+ movq %rdx, 8(%rsp)
call ftrace_return_to_handler
movq %rax, 72(%rsp)
- movq 64(%rsp), %r11
- movq 56(%rsp), %r10
- movq 48(%rsp), %r9
- movq 40(%rsp), %r8
- movq 32(%rsp), %rdi
- movq 24(%rsp), %rsi
- movq 16(%rsp), %rdx
- movq 8(%rsp), %rcx
+ movq 8(%rsp), %rdx
movq (%rsp), %rax
addq $72, %rsp
retq
paranoid_swapgs:
TRACE_IRQS_IRETQ 0
SWAPGS_UNSAFE_STACK
+ RESTORE_ALL 8
+ jmp irq_return
paranoid_restore:
+ TRACE_IRQS_IRETQ 0
RESTORE_ALL 8
jmp irq_return
paranoid_userspace:
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
}
static void hpet_restart_counter(void)
{
hpet_stop_counter();
+ hpet_reset_counter();
hpet_start_counter();
}
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
- unsigned long cfg;
+ unsigned long cfg, cmp, now;
uint64_t delta;
switch (mode) {
hpet_stop_counter();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
+ now = hpet_readl(HPET_COUNTER);
+ cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
/* Make sure we use edge triggered interrupts */
cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
+ hpet_writel(cmp, HPET_Tn_CMP(timer));
+ udelay(1);
+ /*
+ * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+ * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+ * bit is automatically cleared after the first write.
+ * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+ * Publication # 24674)
+ */
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
hpet_start_counter();
hpet_print_config();
{
if (hpet_force_user)
old_ich_force_enable_hpet(dev);
- else
- hpet_print_force_info();
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
#define RTC_NAME "sgi_rtc"
-static cycle_t uv_read_rtc(void);
+static cycle_t uv_read_rtc(struct clocksource *cs);
static int uv_rtc_next_event(unsigned long, struct clock_event_device *);
static void uv_rtc_timer_setup(enum clock_event_mode,
struct clock_event_device *);
/* Initialize comparator value */
uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
- return (expires < uv_read_rtc() && !uv_intr_pending(pnode));
+ return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
}
/*
spin_lock_irqsave(&head->lock, flags);
- if (head->next_cpu == bcpu && uv_read_rtc() >= *t)
+ if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
rc = 1;
*t = ULLONG_MAX;
/*
* Read the RTC.
*/
-static cycle_t uv_read_rtc(void)
+static cycle_t uv_read_rtc(struct clocksource *cs)
{
return (cycle_t)uv_read_local_mmr(UVH_RTC);
}
{
int ced_cpu = cpumask_first(ced->cpumask);
- return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc());
+ return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL));
}
/*
if (!used_math())
return 0;
- clear_used_math(); /* trigger finit */
+
if (task_thread_info(tsk)->status & TS_USEDFPU) {
/*
* Start with clearing the user buffer. This will present a
return -1;
}
+ clear_used_math(); /* trigger finit */
+
if (task_thread_info(tsk)->status & TS_XSAVE) {
struct _fpstate __user *fx = buf;
struct _xstate __user *x = buf;
pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
sp->gfn = gfn;
sp->role = role;
- sp->global = role.cr4_pge;
+ sp->global = 0;
hlist_add_head(&sp->hash_link, bucket);
if (!direct) {
if (rmap_write_protect(vcpu->kvm, gfn))
void kvm_arch_exit(void)
{
+ if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
kvm_x86_ops = NULL;
kvm_mmu_module_exit();
}
void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
{
+ if (vcpu->arch.time_page) {
+ kvm_release_page_dirty(vcpu->arch.time_page);
+ vcpu->arch.time_page = NULL;
+ }
+
kvm_x86_ops->vcpu_free(vcpu);
}
struct list_head list;
struct kmmio_fault_page *release_next;
unsigned long page; /* location of the fault page */
- bool old_presence; /* page presence prior to arming */
+ pteval_t old_presence; /* page presence prior to arming */
bool armed;
/*
{
struct kmmio_probe *p;
list_for_each_entry_rcu(p, &kmmio_probes, list) {
- if (addr >= p->addr && addr <= (p->addr + p->len))
+ if (addr >= p->addr && addr < (p->addr + p->len))
return p;
}
return NULL;
static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page)
{
struct list_head *head;
- struct kmmio_fault_page *p;
+ struct kmmio_fault_page *f;
page &= PAGE_MASK;
head = kmmio_page_list(page);
- list_for_each_entry_rcu(p, head, list) {
- if (p->page == page)
- return p;
+ list_for_each_entry_rcu(f, head, list) {
+ if (f->page == page)
+ return f;
}
return NULL;
}
-static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
+static void clear_pmd_presence(pmd_t *pmd, bool clear, pmdval_t *old)
{
pmdval_t v = pmd_val(*pmd);
- *old = !!(v & _PAGE_PRESENT);
- v &= ~_PAGE_PRESENT;
- if (present)
- v |= _PAGE_PRESENT;
+ if (clear) {
+ *old = v & _PAGE_PRESENT;
+ v &= ~_PAGE_PRESENT;
+ } else /* presume this has been called with clear==true previously */
+ v |= *old;
set_pmd(pmd, __pmd(v));
}
-static void set_pte_presence(pte_t *pte, bool present, bool *old)
+static void clear_pte_presence(pte_t *pte, bool clear, pteval_t *old)
{
pteval_t v = pte_val(*pte);
- *old = !!(v & _PAGE_PRESENT);
- v &= ~_PAGE_PRESENT;
- if (present)
- v |= _PAGE_PRESENT;
+ if (clear) {
+ *old = v & _PAGE_PRESENT;
+ v &= ~_PAGE_PRESENT;
+ } else /* presume this has been called with clear==true previously */
+ v |= *old;
set_pte_atomic(pte, __pte(v));
}
-static int set_page_presence(unsigned long addr, bool present, bool *old)
+static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
{
unsigned int level;
- pte_t *pte = lookup_address(addr, &level);
+ pte_t *pte = lookup_address(f->page, &level);
if (!pte) {
- pr_err("kmmio: no pte for page 0x%08lx\n", addr);
+ pr_err("kmmio: no pte for page 0x%08lx\n", f->page);
return -1;
}
switch (level) {
case PG_LEVEL_2M:
- set_pmd_presence((pmd_t *)pte, present, old);
+ clear_pmd_presence((pmd_t *)pte, clear, &f->old_presence);
break;
case PG_LEVEL_4K:
- set_pte_presence(pte, present, old);
+ clear_pte_presence(pte, clear, &f->old_presence);
break;
default:
pr_err("kmmio: unexpected page level 0x%x.\n", level);
return -1;
}
- __flush_tlb_one(addr);
+ __flush_tlb_one(f->page);
return 0;
}
WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
if (f->armed) {
pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
- f->page, f->count, f->old_presence);
+ f->page, f->count, !!f->old_presence);
}
- ret = set_page_presence(f->page, false, &f->old_presence);
+ ret = clear_page_presence(f, true);
WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
f->armed = true;
return ret;
/** Restore the given page to saved presence state. */
static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- bool tmp;
- int ret = set_page_presence(f->page, f->old_presence, &tmp);
+ int ret = clear_page_presence(f, false);
WARN_ONCE(ret < 0,
KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
f->armed = false;
struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
if (!ctx->active) {
- pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+ /*
+ * debug traps without an active context are due to either
+ * something external causing them (f.e. using a debugger while
+ * mmio tracing enabled), or erroneous behaviour
+ */
+ pr_warning("kmmio: unexpected debug trap on CPU %d.\n",
smp_processor_id());
goto out;
}
head,
struct kmmio_delayed_release,
rcu);
- struct kmmio_fault_page *p = dr->release_list;
- while (p) {
- struct kmmio_fault_page *next = p->release_next;
- BUG_ON(p->count);
- kfree(p);
- p = next;
+ struct kmmio_fault_page *f = dr->release_list;
+ while (f) {
+ struct kmmio_fault_page *next = f->release_next;
+ BUG_ON(f->count);
+ kfree(f);
+ f = next;
}
kfree(dr);
}
{
struct kmmio_delayed_release *dr =
container_of(head, struct kmmio_delayed_release, rcu);
- struct kmmio_fault_page *p = dr->release_list;
+ struct kmmio_fault_page *f = dr->release_list;
struct kmmio_fault_page **prevp = &dr->release_list;
unsigned long flags;
spin_lock_irqsave(&kmmio_lock, flags);
- while (p) {
- if (!p->count) {
- list_del_rcu(&p->list);
- prevp = &p->release_next;
+ while (f) {
+ if (!f->count) {
+ list_del_rcu(&f->list);
+ prevp = &f->release_next;
} else {
- *prevp = p->release_next;
+ *prevp = f->release_next;
}
- p = p->release_next;
+ f = f->release_next;
}
spin_unlock_irqrestore(&kmmio_lock, flags);
}
EXPORT_SYMBOL(unregister_kmmio_probe);
-static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val,
- void *args)
+static int
+kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args)
{
struct die_args *arg = args;
.notifier_call = kmmio_die_notifier
};
-static int __init init_kmmio(void)
+int kmmio_init(void)
{
int i;
+
for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++)
INIT_LIST_HEAD(&kmmio_page_table[i]);
+
return register_die_notifier(&nb_die);
}
-fs_initcall(init_kmmio); /* should be before device_initcall() */
+
+void kmmio_cleanup(void)
+{
+ int i;
+
+ unregister_die_notifier(&nb_die);
+ for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) {
+ WARN_ONCE(!list_empty(&kmmio_page_table[i]),
+ KERN_ERR "kmmio_page_table not empty at cleanup, any further tracing will leak memory.\n");
+ }
+}
if (nommiotrace)
pr_info(NAME "MMIO tracing disabled.\n");
+ kmmio_init();
enter_uniprocessor();
spin_lock_irq(&trace_lock);
atomic_inc(&mmiotrace_enabled);
clear_trace_list(); /* guarantees: no more kmmio callbacks */
leave_uniprocessor();
+ kmmio_cleanup();
pr_info(NAME "disabled.\n");
out:
mutex_unlock(&mmiotrace_mutex);
}
#endif
-static unsigned long calculate_numa_remap_pages(void)
+static __init unsigned long calculate_numa_remap_pages(void)
{
int nid;
unsigned long size, reserve_pages = 0;
const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
int nid;
+ if (!end)
+ return;
+
start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
static struct acpi_table_slit *acpi_slit;
static nodemask_t nodes_parsed __initdata;
+static nodemask_t cpu_nodes_parsed __initdata;
static struct bootnode nodes[MAX_NUMNODES] __initdata;
static struct bootnode nodes_add[MAX_NUMNODES];
static int found_add_area __initdata;
apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
+ node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, apic_id, node);
else
apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
+ node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, apic_id, node);
return -1;
}
- node_possible_map = nodes_parsed;
+ /* Account for nodes with cpus and no memory */
+ nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
/* Finally register nodes */
for_each_node_mask(i, node_possible_map)
static int pci_root_num;
static struct pci_root_info pci_root_info[PCI_ROOT_NR];
-void set_pci_bus_resources_arch_default(struct pci_bus *b)
+void x86_pci_root_bus_res_quirks(struct pci_bus *b)
{
int i;
int j;
struct pci_root_info *info;
+ /* don't go for it if _CRS is used */
+ if (pci_probe & PCI_USE__CRS)
+ return;
+
/* if only one root bus, don't need to anything */
if (pci_root_num < 2)
return;
* are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
+ /* root bus? */
+ if (!b->parent)
+ x86_pci_root_bus_res_quirks(b);
pci_read_bridge_bases(b);
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
*/
fs_initcall(pcibios_assign_resources);
+void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
+{
+}
+
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
if (!fixmem32)
return AE_OK;
if ((mcfg_res->start >= fixmem32->address) &&
- (mcfg_res->end < (fixmem32->address +
+ (mcfg_res->end <= (fixmem32->address +
fixmem32->address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
return AE_OK;
if ((mcfg_res->start >= address.minimum) &&
- (mcfg_res->end < (address.minimum + address.address_length))) {
+ (mcfg_res->end <= (address.minimum + address.address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
}
u64 old_size = size;
int valid = 0;
- while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+ while (!is_reserved(addr, addr + size, E820_RESERVED)) {
size >>= 1;
if (size < (16UL<<20))
break;
{
long ret;
if (likely(gtod->sysctl_enabled && gtod->clock.vread)) {
- BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
- offsetof(struct timespec, tv_nsec) ||
- sizeof(*tv) != sizeof(struct timespec));
- do_realtime((struct timespec *)tv);
- tv->tv_usec /= 1000;
+ if (likely(tv != NULL)) {
+ BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
+ offsetof(struct timespec, tv_nsec) ||
+ sizeof(*tv) != sizeof(struct timespec));
+ do_realtime((struct timespec *)tv);
+ tv->tv_usec /= 1000;
+ }
if (unlikely(tz != NULL)) {
/* Avoid memcpy. Some old compilers fail to inline it */
tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
#include <asm/page.h>
#include <asm/cacheasm.h>
+#include <linux/init.h>
#include <linux/linkage.h>
/*
* instruction.
*/
- .section .head.text, "ax"
+ __HEAD
.globl _start
_start: _j 2f
.align 4
.text :
{
- /* The .head.text section must be the first section! */
- *(.head.text)
+ /* The HEAD_TEXT section must be the first section! */
+ HEAD_TEXT
*(.literal .text)
VMLINUX_SYMBOL(__sched_text_start) = .;
*(.sched.literal .sched.text)
}
static struct request *
-blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
+blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
blk_rq_init(q, rq);
- rq->cmd_flags = rw | REQ_ALLOCED;
+ rq->cmd_flags = flags | REQ_ALLOCED;
if (priv) {
if (unlikely(elv_set_request(q, rq, gfp_mask))) {
if (priv)
rl->elvpriv++;
+ if (blk_queue_io_stat(q))
+ rw_flags |= REQ_IO_STAT;
spin_unlock_irq(q->queue_lock);
rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
bio->bi_bdev = bdev->bd_contains;
trace_block_remap(bdev_get_queue(bio->bi_bdev), bio,
- bdev->bd_dev, bio->bi_sector,
+ bdev->bd_dev,
bio->bi_sector - p->start_sect);
}
}
goto end_io;
if (old_sector != -1)
- trace_block_remap(q, bio, old_dev, bio->bi_sector,
- old_sector);
+ trace_block_remap(q, bio, old_dev, old_sector);
trace_block_bio_queue(q, bio);
elv_merge_requests(q, req, next);
- blk_account_io_merge(req);
+ /*
+ * 'next' is going away, so update stats accordingly
+ */
+ blk_account_io_merge(next);
req->ioprio = ioprio_best(req->ioprio, next->ioprio);
if (blk_rq_cpu_valid(next))
/**
* blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q: the request queue for the device
- * @dma_addr: bus address limit
+ * @q: the request queue for the device
+ * @dma_mask: the maximum address the device can handle
*
* Description:
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @dma_addr.
+ * buffers for doing I/O to pages residing above @dma_mask.
**/
-void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
+void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
{
- unsigned long b_pfn = dma_addr >> PAGE_SHIFT;
+ unsigned long b_pfn = dma_mask >> PAGE_SHIFT;
int dma = 0;
q->bounce_gfp = GFP_NOIO;
#if BITS_PER_LONG == 64
- /* Assume anything <= 4GB can be handled by IOMMU.
- Actually some IOMMUs can handle everything, but I don't
- know of a way to test this here. */
- if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ /*
+ * Assume anything <= 4GB can be handled by IOMMU. Actually
+ * some IOMMUs can handle everything, but I don't know of a
+ * way to test this here.
+ */
+ if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
ssize_t ret = queue_var_store(&stats, page, count);
spin_lock_irq(q->queue_lock);
- elv_quiesce_start(q);
-
if (stats)
queue_flag_set(QUEUE_FLAG_IO_STAT, q);
else
queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
-
- elv_quiesce_end(q);
spin_unlock_irq(q->queue_lock);
return ret;
int blk_register_queue(struct gendisk *disk)
{
int ret;
+ struct device *dev = disk_to_dev(disk);
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return -ENXIO;
+ ret = blk_trace_init_sysfs(dev);
+ if (ret)
+ return ret;
+
if (!q->request_fn)
return 0;
- ret = kobject_add(&q->kobj, kobject_get(&disk_to_dev(disk)->kobj),
+ ret = kobject_add(&q->kobj, kobject_get(&dev->kobj),
"%s", "queue");
if (ret < 0)
return ret;
struct request *rq, *tmp;
LIST_HEAD(list);
+ /*
+ * Not a request based block device, nothing to abort
+ */
+ if (!q->request_fn)
+ return;
+
spin_lock_irqsave(q->queue_lock, flags);
elv_abort_queue(q);
list_for_each_entry_safe(rq, tmp, &list, timeout_list)
blk_abort_request(rq);
+ /*
+ * Occasionally, blk_abort_request() will return without
+ * deleting the element from the list. Make sure we add those back
+ * instead of leaving them on the local stack list.
+ */
+ list_splice(&list, &q->timeout_list);
+
spin_unlock_irqrestore(q->queue_lock, flags);
}
static inline int blk_do_io_stat(struct request *rq)
{
- struct gendisk *disk = rq->rq_disk;
-
- if (!disk || !disk->queue)
- return 0;
-
- return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV);
+ return rq->rq_disk && blk_rq_io_stat(rq);
}
#endif
unsigned long rb_key;
/* prio tree member */
struct rb_node p_node;
+ /* prio tree root we belong to, if any */
+ struct rb_root *p_root;
/* sorted list of pending requests */
struct rb_root sort_list;
/* if fifo isn't expired, next request to serve */
}
static struct cfq_queue *
-cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector,
- struct rb_node **ret_parent, struct rb_node ***rb_link)
+cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
+ sector_t sector, struct rb_node **ret_parent,
+ struct rb_node ***rb_link)
{
- struct rb_root *root = &cfqd->prio_trees[ioprio];
struct rb_node **p, *parent;
struct cfq_queue *cfqq = NULL;
else
break;
p = n;
+ cfqq = NULL;
}
*ret_parent = parent;
if (rb_link)
*rb_link = p;
- return NULL;
+ return cfqq;
}
static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
- struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio];
struct rb_node **p, *parent;
struct cfq_queue *__cfqq;
- if (!RB_EMPTY_NODE(&cfqq->p_node))
- rb_erase_init(&cfqq->p_node, root);
+ if (cfqq->p_root) {
+ rb_erase(&cfqq->p_node, cfqq->p_root);
+ cfqq->p_root = NULL;
+ }
if (cfq_class_idle(cfqq))
return;
if (!cfqq->next_rq)
return;
- __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector,
+ cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
+ __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
&parent, &p);
- BUG_ON(__cfqq);
-
- rb_link_node(&cfqq->p_node, parent, p);
- rb_insert_color(&cfqq->p_node, root);
+ if (!__cfqq) {
+ rb_link_node(&cfqq->p_node, parent, p);
+ rb_insert_color(&cfqq->p_node, cfqq->p_root);
+ } else
+ cfqq->p_root = NULL;
}
/*
if (!RB_EMPTY_NODE(&cfqq->rb_node))
cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
- if (!RB_EMPTY_NODE(&cfqq->p_node))
- rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]);
+ if (cfqq->p_root) {
+ rb_erase(&cfqq->p_node, cfqq->p_root);
+ cfqq->p_root = NULL;
+ }
BUG_ON(!cfqd->busy_queues);
cfqd->busy_queues--;
return cfqd->last_position - rq->sector;
}
+#define CIC_SEEK_THR 8 * 1024
+#define CIC_SEEKY(cic) ((cic)->seek_mean > CIC_SEEK_THR)
+
static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
{
struct cfq_io_context *cic = cfqd->active_cic;
+ sector_t sdist = cic->seek_mean;
if (!sample_valid(cic->seek_samples))
- return 0;
+ sdist = CIC_SEEK_THR;
- return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
+ return cfq_dist_from_last(cfqd, rq) <= sdist;
}
static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
struct cfq_queue *cur_cfqq)
{
- struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio];
+ struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio];
struct rb_node *parent, *node;
struct cfq_queue *__cfqq;
sector_t sector = cfqd->last_position;
* First, if we find a request starting at the end of the last
* request, choose it.
*/
- __cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio,
- sector, &parent, NULL);
+ __cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL);
if (__cfqq)
return __cfqq;
return cfqq;
}
-
-#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
-
static void cfq_arm_slice_timer(struct cfq_data *cfqd)
{
struct cfq_queue *cfqq = cfqd->active_queue;
sector_t sdist;
u64 total;
- if (cic->last_request_pos < rq->sector)
+ if (!cic->last_request_pos)
+ sdist = 0;
+ else if (cic->last_request_pos < rq->sector)
sdist = rq->sector - cic->last_request_pos;
else
sdist = cic->last_request_pos - rq->sector;
static void *cfq_init_queue(struct request_queue *q)
{
struct cfq_data *cfqd;
+ int i;
cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
if (!cfqd)
return NULL;
cfqd->service_tree = CFQ_RB_ROOT;
+
+ /*
+ * Not strictly needed (since RB_ROOT just clears the node and we
+ * zeroed cfqd on alloc), but better be safe in case someone decides
+ * to add magic to the rb code
+ */
+ for (i = 0; i < CFQ_PRIO_LISTS; i++)
+ cfqd->prio_trees[i] = RB_ROOT;
+
INIT_LIST_HEAD(&cfqd->cic_list);
cfqd->queue = q;
memcpy(&buts.name, &cbuts.name, 32);
mutex_lock(&bdev->bd_mutex);
- ret = do_blk_trace_setup(q, b, bdev->bd_dev, &buts);
+ ret = do_blk_trace_setup(q, b, bdev->bd_dev, bdev, &buts);
mutex_unlock(&bdev->bd_mutex);
if (ret)
return ret;
if (flags & DISK_PITER_REVERSE)
piter->idx = ptbl->len - 1;
- else if (flags & DISK_PITER_INCL_PART0)
+ else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0))
piter->idx = 0;
else
piter->idx = 1;
/* determine iteration parameters */
if (piter->flags & DISK_PITER_REVERSE) {
inc = -1;
- if (piter->flags & DISK_PITER_INCL_PART0)
+ if (piter->flags & (DISK_PITER_INCL_PART0 |
+ DISK_PITER_INCL_EMPTY_PART0))
end = -1;
else
end = 0;
part = rcu_dereference(ptbl->part[piter->idx]);
if (!part)
continue;
- if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects)
+ if (!part->nr_sects &&
+ !(piter->flags & DISK_PITER_INCL_EMPTY) &&
+ !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 &&
+ piter->idx == 0))
continue;
get_device(part_to_dev(part));
"\n\n");
*/
- disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0);
+ disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0);
while ((hd = disk_part_iter_next(&piter))) {
cpu = part_stat_lock();
part_round_stats(cpu, hd);
if (hdr->iovec_count) {
const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
+ size_t iov_data_len;
struct sg_iovec *iov;
iov = kmalloc(size, GFP_KERNEL);
goto out;
}
+ /* SG_IO howto says that the shorter of the two wins */
+ iov_data_len = iov_length((struct iovec *)iov,
+ hdr->iovec_count);
+ if (hdr->dxfer_len < iov_data_len) {
+ hdr->iovec_count = iov_shorten((struct iovec *)iov,
+ hdr->iovec_count,
+ hdr->dxfer_len);
+ iov_data_len = hdr->dxfer_len;
+ }
+
ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
- hdr->dxfer_len, GFP_KERNEL);
+ iov_data_len, GFP_KERNEL);
kfree(iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
obj-y += serial/
obj-$(CONFIG_PARPORT) += parport/
-obj-y += base/ block/ misc/ mfd/ media/
+obj-y += base/ block/ misc/ mfd/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_RTC_LIB) += rtc/
-obj-y += i2c/
+obj-y += i2c/ media/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state
return_ACPI_STATUS(status);
}
- /* Execute the _GTS method */
+ if (gts) {
+ /* Execute the _GTS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
+ status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ return_ACPI_STATUS(status);
+ }
}
/* Get current value of PM1A control */
}
}
- /* Execute the _BFS method */
+ if (bfs) {
+ /* Execute the _BFS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ }
}
-
return_ACPI_STATUS(status);
}
{"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
{"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
{"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
+ {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
{"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
{"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
{"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
ACPI_ERROR((AE_INFO,
"Illegal I/O port address/length above 64K: 0x%p/%X",
ACPI_CAST_PTR(void, address), byte_width));
- return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ return_ACPI_STATUS(AE_LIMIT);
}
/* Exit if requested address is not within the protected port table */
/* Port illegality may depend on the _OSI calls made by the BIOS */
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
- ACPI_ERROR((AE_INFO,
- "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
- ACPI_CAST_PTR(void, address),
- byte_width, port_info->name,
- port_info->start, port_info->end));
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
+ ACPI_CAST_PTR(void, address),
+ byte_width, port_info->name,
+ port_info->start,
+ port_info->end));
return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
}
* Value Where value is placed
* Width Number of bits
*
- * RETURN: Value read from port
+ * RETURN: Status and value read from port
*
* DESCRIPTION: Read data from an I/O port or register. This is a front-end
* to acpi_os_read_port that performs validation on both the port
acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
{
acpi_status status;
+ u32 one_byte;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_read_port(address, value, width);
return status;
}
- status = acpi_os_read_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0, *value = 0; i < width; i += 8) {
+
+ /* Validate and read one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status = acpi_os_read_port(address, &one_byte, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+
+ *value |= (one_byte << i);
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
/******************************************************************************
* Value Value to write
* Width Number of bits
*
- * RETURN: None
+ * RETURN: Status
*
* DESCRIPTION: Write data to an I/O port or register. This is a front-end
* to acpi_os_write_port that performs validation on both the port
acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
{
acpi_status status;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_write_port(address, value, width);
return status;
}
- status = acpi_os_write_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0; i < width; i += 8) {
+
+ /* Validate and write one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status =
+ acpi_os_write_port(address, (value >> i) & 0xFF, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
package_element = *top_object_list;
+ /* We must have a valid Package object */
+
+ if (!package_element ||
+ (package_element->common.type != ACPI_TYPE_PACKAGE)) {
+ return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+ }
+
/*
* The sub_object_list will now point to an array of the
* four IRQ elements: Address, Pin, Source and source_index
user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
for (index = 0; index < number_of_elements; index++) {
- int source_name_index = 2;
- int source_index_index = 3;
/*
* Point user_prt past this current structure
return_ACPI_STATUS(AE_BAD_DATA);
}
- /*
- * If BIOS erroneously reversed the _PRT source_name and source_index,
- * then reverse them back.
- */
- if ((sub_object_list[3])->common.type !=
- ACPI_TYPE_INTEGER) {
- if (acpi_gbl_enable_interpreter_slack) {
- source_name_index = 3;
- source_index_index = 2;
- printk(KERN_WARNING
- "ACPI: Handling Garbled _PRT entry\n");
- } else {
- ACPI_ERROR((AE_INFO,
- "(PRT[%X].source_index) Need Integer, found %s",
- index,
- acpi_ut_get_object_type_name
- (sub_object_list[3])));
- return_ACPI_STATUS(AE_BAD_DATA);
- }
- }
-
user_prt->pin = (u32) obj_desc->integer.value;
/*
* 3) Third subobject: Dereference the PRT.source_name
* The name may be unresolved (slack mode), so allow a null object
*/
- obj_desc = sub_object_list[source_name_index];
+ obj_desc = sub_object_list[2];
if (obj_desc) {
switch (obj_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
/* 4) Fourth subobject: Dereference the PRT.source_index */
- obj_desc = sub_object_list[source_index_index];
+ obj_desc = sub_object_list[3];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
"(PRT[%X].SourceIndex) Need Integer, found %s",
/*
- * acpi_button.c - ACPI Button Driver ($Revision: 30 $)
+ * button.c - ACPI Button Driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
#define ACPI_BUTTON_SUBCLASS_POWER "power"
#define ACPI_BUTTON_HID_POWER "PNP0C0C"
-#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF "Power Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button"
#define ACPI_BUTTON_TYPE_POWER 0x01
-#define ACPI_BUTTON_TYPE_POWERF 0x02
#define ACPI_BUTTON_SUBCLASS_SLEEP "sleep"
#define ACPI_BUTTON_HID_SLEEP "PNP0C0E"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF "Sleep Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button"
#define ACPI_BUTTON_TYPE_SLEEP 0x03
-#define ACPI_BUTTON_TYPE_SLEEPF 0x04
#define ACPI_BUTTON_SUBCLASS_LID "lid"
#define ACPI_BUTTON_HID_LID "PNP0C0D"
};
struct acpi_button {
- struct acpi_device *device; /* Fixed button kludge */
unsigned int type;
struct input_dev *input;
char phys[32]; /* for input device */
static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
-
- if (!button || !button->device)
- return 0;
+ struct acpi_device *device = seq->private;
seq_printf(seq, "type: %s\n",
- acpi_device_name(button->device));
-
+ acpi_device_name(device));
return 0;
}
static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
+ struct acpi_device *device = seq->private;
acpi_status status;
unsigned long long state;
- if (!button || !button->device)
- return 0;
-
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
seq_printf(seq, "state: %s\n",
ACPI_FAILURE(status) ? "unsupported" :
(state ? "open" : "closed"));
static int acpi_button_add_fs(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
struct proc_dir_entry *entry = NULL;
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
if (!acpi_power_dir)
acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER,
acpi_button_dir);
entry = acpi_power_dir;
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
if (!acpi_sleep_dir)
acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP,
acpi_button_dir);
/* 'info' [R] */
entry = proc_create_data(ACPI_BUTTON_FILE_INFO,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_info_fops,
- acpi_driver_data(device));
+ &acpi_button_info_fops, device);
if (!entry)
return -ENODEV;
if (button->type == ACPI_BUTTON_TYPE_LID) {
entry = proc_create_data(ACPI_BUTTON_FILE_STATE,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_state_fops,
- acpi_driver_data(device));
+ &acpi_button_state_fops, device);
if (!entry)
return -ENODEV;
}
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_lid_send_state(struct acpi_button *button)
+static int acpi_lid_send_state(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
unsigned long long state;
acpi_status status;
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
- &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
if (ACPI_FAILURE(status))
return -ENODEV;
+
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
input_sync(button->input);
struct acpi_button *button = acpi_driver_data(device);
struct input_dev *input;
- if (!button || !button->device)
- return;
-
switch (event) {
case ACPI_FIXED_HARDWARE_EVENT:
event = ACPI_BUTTON_NOTIFY_STATUS;
case ACPI_BUTTON_NOTIFY_STATUS:
input = button->input;
if (button->type == ACPI_BUTTON_TYPE_LID) {
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
} else {
int keycode = test_bit(KEY_SLEEP, input->keybit) ?
KEY_SLEEP : KEY_POWER;
input_sync(input);
}
- acpi_bus_generate_proc_event(button->device, event,
- ++button->pushed);
+ acpi_bus_generate_proc_event(device, event, ++button->pushed);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_button_resume(struct acpi_device *device)
{
- struct acpi_button *button;
- if (!device)
- return -EINVAL;
- button = acpi_driver_data(device);
- if (button && button->type == ACPI_BUTTON_TYPE_LID)
- return acpi_lid_send_state(button);
+ struct acpi_button *button = acpi_driver_data(device);
+
+ if (button->type == ACPI_BUTTON_TYPE_LID)
+ return acpi_lid_send_state(device);
return 0;
}
static int acpi_button_add(struct acpi_device *device)
{
- int error;
struct acpi_button *button;
struct input_dev *input;
-
- if (!device)
- return -EINVAL;
+ char *hid, *name, *class;
+ int error;
button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
if (!button)
return -ENOMEM;
- button->device = device;
device->driver_data = button;
button->input = input = input_allocate_device();
goto err_free_button;
}
- /*
- * Determine the button type (via hid), as fixed-feature buttons
- * need to be handled a bit differently than generic-space.
- */
- if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+ hid = acpi_device_hid(device);
+ name = acpi_device_name(device);
+ class = acpi_device_class(device);
+
+ if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
+ !strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
button->type = ACPI_BUTTON_TYPE_POWER;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
- button->type = ACPI_BUTTON_TYPE_POWERF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_POWERF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
+ !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
button->type = ACPI_BUTTON_TYPE_SLEEP;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
- button->type = ACPI_BUTTON_TYPE_SLEEPF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_SLEEPF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
button->type = ACPI_BUTTON_TYPE_LID;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
} else {
- printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
- acpi_device_hid(device));
+ printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
error = -ENODEV;
goto err_free_input;
}
if (error)
goto err_free_input;
- snprintf(button->phys, sizeof(button->phys),
- "%s/button/input0", acpi_device_hid(device));
+ snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
- input->name = acpi_device_name(device);
+ input->name = name;
input->phys = button->phys;
input->id.bustype = BUS_HOST;
input->id.product = button->type;
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_POWER, input->keybit);
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_SLEEP, input->keybit);
break;
if (error)
goto err_remove_fs;
if (button->type == ACPI_BUTTON_TYPE_LID)
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
device->wakeup.state.enabled = 1;
}
- printk(KERN_INFO PREFIX "%s [%s]\n",
- acpi_device_name(device), acpi_device_bid(device));
-
+ printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
return 0;
err_remove_fs:
static int acpi_button_remove(struct acpi_device *device, int type)
{
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
+ struct acpi_button *button = acpi_driver_data(device);
acpi_button_remove_fs(device);
input_unregister_device(button->input);
kfree(button);
-
return 0;
}
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
if (!acpi_button_dir)
return -ENODEV;
+
result = acpi_bus_register_driver(&acpi_button_driver);
if (result < 0) {
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
+ set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
if (handled) {
acpi_irq_handled++;
return IRQ_HANDLED;
- } else
+ } else {
+ acpi_irq_not_handled++;
return IRQ_NONE;
+ }
}
acpi_status
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+ /* TSC could halt in idle, so notify users */
+ if (tsc_halts_in_c(cx->type))
+ mark_tsc_unstable("TSC halts in idle");;
+#endif
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
seq_printf(seq, "active state: C%zd\n"
"max_cstate: C%d\n"
- "bus master activity: %08x\n"
"maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
- max_cstate, (unsigned)pr->power.bm_activity,
- pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
+ max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
kt2 = ktime_get_real();
idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(cx->type))
- mark_tsc_unstable("TSC halts in idle");;
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
*/
acpi_state_timer_broadcast(pr, cx, 1);
+ kt1 = ktime_get_real();
/*
* disable bus master
* bm_check implies we need ARB_DIS
ACPI_FLUSH_CPU_CACHE();
}
- kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
/* Re-enable bus master arbitration */
if (pr->flags.bm_check && pr->flags.bm_control) {
c3_cpu_count--;
spin_unlock(&c3_lock);
}
+ kt2 = ktime_get_real();
+ idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(ACPI_STATE_C3))
- mark_tsc_unstable("TSC halts in idle");
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
dev->states[i].desc[0] = '\0';
}
+ if (max_cstate == 0)
+ max_cstate = 1;
+
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
acpi_enter_sleep_state(ACPI_STATE_S5);
}
+/*
+ * ACPI 2.0 created the optional _GTS and _BFS,
+ * but industry adoption has been neither rapid nor broad.
+ *
+ * Linux gets into trouble when it executes poorly validated
+ * paths through the BIOS, so disable _GTS and _BFS by default,
+ * but do speak up and offer the option to enable them.
+ */
+void __init acpi_gts_bfs_check(void)
+{
+ acpi_handle dummy;
+
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+}
+
int __init acpi_sleep_init(void)
{
acpi_status status;
* object can also be evaluated when the system enters S5.
*/
register_reboot_notifier(&tts_notifier);
+ acpi_gts_bfs_check();
return 0;
}
#define ACPI_SYSTEM_DEVICE_NAME "System"
u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
/*
* Make ACPICA version work as module param
#define COUNT_GPE 0
#define COUNT_SCI 1 /* acpi_irq_handled */
-#define COUNT_ERROR 2 /* other */
-#define NUM_COUNTERS_EXTRA 3
+#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */
+#define COUNT_ERROR 3 /* other */
+#define NUM_COUNTERS_EXTRA 4
struct event_counter {
u32 count;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
acpi_irq_handled;
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+ acpi_irq_not_handled;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
acpi_gpe_count;
all_counters[i].count = 0;
acpi_gpe_count = 0;
acpi_irq_handled = 0;
+ acpi_irq_not_handled = 0;
goto end;
}
sprintf(buffer, "gpe_all");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
sprintf(buffer, "sci");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+ sprintf(buffer, "sci_not");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
sprintf(buffer, "error");
else
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
- tz->polling_frequency);
+ tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
* In this case, the first two elements in _BCL packages
* are also supported brightness levels that OS should take care of.
*/
- for (i = 2; i < count; i++)
- if (br->levels[i] == br->levels[0] ||
- br->levels[i] == br->levels[1])
+ for (i = 2; i < count; i++) {
+ if (br->levels[i] == br->levels[0])
level_ac_battery++;
+ if (br->levels[i] == br->levels[1])
+ level_ac_battery++;
+ }
if (level_ac_battery < 2) {
level_ac_battery = 2 - level_ac_battery;
br->flags._BCM_use_index = br->flags._BCL_use_index;
/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
- br->curr = max_level;
+ br->curr = level_old = max_level;
+
+ if (!device->cap._BQC)
+ goto set_level;
+
result = acpi_video_device_lcd_get_level_current(device, &level_old);
if (result)
goto out_free_levels;
- result = acpi_video_device_lcd_set_level(device, br->curr);
+ /*
+ * Set the level to maximum and check if _BQC uses indexed value
+ */
+ result = acpi_video_device_lcd_set_level(device, max_level);
if (result)
goto out_free_levels;
if (result)
goto out_free_levels;
- if ((level != level_old) && !br->flags._BCM_use_index) {
- /* Note:
- * This piece of code does not work correctly if the current
- * brightness levels is 0.
- * But I guess boxes that boot with such a dark screen are rare
- * and no more code is needed to cover this specifial case.
- */
-
- if (level_ac_battery != 2) {
- /*
- * For now, we don't support the _BCL like this:
- * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
- * because we may mess up the index returned by _BQC.
- * Plus: we have not got a box like this.
- */
- ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
- }
- br->flags._BQC_use_index = 1;
- }
+ br->flags._BQC_use_index = (level == max_level ? 0 : 1);
+
+ if (!br->flags._BQC_use_index)
+ goto set_level;
+
+ if (br->flags._BCL_reversed)
+ level_old = (br->count - 1) - level_old;
+ level_old = br->levels[level_old];
+
+set_level:
+ result = acpi_video_device_lcd_set_level(device, level_old);
+ if (result)
+ goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"found %d brightness levels\n", count - 2));
return acpi_video_register();
}
-static void __exit acpi_video_exit(void)
+void __exit acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
return;
}
+EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
if (i > 0) {
SET_HANDLER(&write_intr);
outsw(HD_DATA, req->buffer, 256);
- local_irq_enable();
} else {
#if (HD_DELAY > 0)
last_req = read_timer();
if (!CURRENT)
return;
- disable_irq(HD_IRQ);
- local_irq_enable();
+ spin_lock_irq(hd_queue->queue_lock);
reset = 1;
name = CURRENT->rq_disk->disk_name;
printk("%s: timeout\n", name);
#endif
end_request(CURRENT, 0);
}
- local_irq_disable();
hd_request();
- enable_irq(HD_IRQ);
+ spin_unlock_irq(hd_queue->queue_lock);
}
static int do_special_op(struct hd_i_struct *disk, struct request *req)
return;
repeat:
del_timer(&device_timer);
- local_irq_enable();
req = CURRENT;
if (!req) {
}
if (reset) {
- local_irq_disable();
reset_hd();
return;
}
static void do_hd_request(struct request_queue *q)
{
- disable_irq(HD_IRQ);
hd_request();
- enable_irq(HD_IRQ);
}
static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
void (*handler)(void) = do_hd;
+ spin_lock(hd_queue->queue_lock);
+
do_hd = NULL;
del_timer(&device_timer);
if (!handler)
handler = unexpected_hd_interrupt;
handler();
- local_irq_enable();
+
+ spin_unlock(hd_queue->queue_lock);
+
return IRQ_HANDLED;
}
if (host->breq) {
req = elv_next_request(host->breq);
if (req)
- printk(", sector=%ld", req->sector);
+ printk(", sector=%u", (u32)req->sector);
}
}
struct mg_host *host = dev_id;
void (*handler)(struct mg_host *) = host->mg_do_intr;
- host->mg_do_intr = 0;
+ spin_lock(&host->lock);
+
+ host->mg_do_intr = NULL;
del_timer(&host->timer);
if (!handler)
handler = mg_unexpected_intr;
handler(host);
+
+ spin_unlock(&host->lock);
+
return IRQ_HANDLED;
}
remains = req->nr_sectors;
- if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, 0) !=
+ if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) !=
MG_ERR_NONE)
mg_bad_rw_intr(host);
remains = req->nr_sectors;
- if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, 0) !=
+ if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) !=
MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
char *name;
struct request *req;
+ spin_lock_irq(&host->lock);
+
req = elv_next_request(host->breq);
if (!req)
- return;
+ goto out_unlock;
host->mg_do_intr = NULL;
mg_bad_rw_intr(host);
mg_request(host->breq);
+out_unlock:
+ spin_unlock_irq(&host->lock);
}
static void mg_request_poll(struct request_queue *q)
goto failed_alloc;
blk_queue_make_request(card->queue, mm_make_request);
+ card->queue->queue_lock = &card->lock;
card->queue->queuedata = card;
card->queue->unplug_fn = mm_unplug_device;
{
int len;
- /* We never get spurious callbacks. */
+ /* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
if (!vq->vq_ops->get_buf(vq, &len))
- BUG();
+ return;
data_left = len / sizeof(random_data[0]);
complete(&have_data);
rc = 1;
break;
case ibft_eth_ip_addr:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
rc = 1;
break;
case ibft_eth_subnet_mask:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (nic->subnet_mask_prefix)
rc = 1;
break;
case ibft_eth_origin:
int saved_x, saved_y;
struct drm_encoder *encoder;
bool ret = true;
- bool depth_changed, bpp_changed;
adjusted_mode = drm_mode_duplicate(dev, mode);
if (!crtc->enabled)
return true;
- if (old_fb && crtc->fb) {
- depth_changed = (old_fb->depth != crtc->fb->depth);
- bpp_changed = (old_fb->bits_per_pixel !=
- crtc->fb->bits_per_pixel);
- } else {
- depth_changed = true;
- bpp_changed = true;
- }
-
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
crtc->x = x;
crtc->y = y;
- if (drm_mode_equal(&saved_mode, &crtc->mode)) {
- if (saved_x != crtc->x || saved_y != crtc->y ||
- depth_changed || bpp_changed) {
- ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
- old_fb);
- goto done;
- }
- }
-
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
retcode = -EINVAL;
} else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) ||
((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) ||
- ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) {
+ ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) ||
+ (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) {
retcode = -EACCES;
} else {
if (cmd & (IOC_IN | IOC_OUT)) {
if (dev->driver->load) {
ret = dev->driver->load(dev, ent->driver_data);
if (ret)
- goto err_g3;
+ goto err_g4;
}
/* setup the grouping for the legacy output */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
if (ret)
- goto err_g3;
+ goto err_g4;
}
list_add_tail(&dev->driver_item, &driver->device_list);
return 0;
-err_g3:
+err_g4:
drm_put_minor(&dev->primary);
+err_g3:
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ drm_put_minor(&dev->control);
err_g2:
pci_disable_device(pdev);
err_g1:
dev->agp = NULL;
}
- drm_ht_remove(&dev->map_hash);
- drm_ctxbitmap_cleanup(dev);
-
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
drm_rmmap(dev, r_list->map);
+ drm_ht_remove(&dev->map_hash);
+
+ drm_ctxbitmap_cleanup(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_put_minor(&dev->control);
return 0;
- device_unregister(&minor->kdev);
err_out:
-
return err;
}
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
- goto fail_batch_free;
+ goto fail_clip_free;
}
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
-fail_batch_free:
- drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
fail_clip_free:
drm_free(cliprects,
cmdbuf->num_cliprects * sizeof(struct drm_clip_rect),
DRM_MEM_DRIVER);
+fail_batch_free:
+ drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
return ret;
}
if (dev_priv->regs != NULL)
iounmap(dev_priv->regs);
- intel_opregion_free(dev);
+ intel_opregion_free(dev, 0);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_modeset_cleanup(dev);
drm_irq_uninstall(dev);
}
- intel_opregion_free(dev);
+ intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
#ifdef CONFIG_ACPI
/* i915_opregion.c */
extern int intel_opregion_init(struct drm_device *dev, int resume);
-extern void intel_opregion_free(struct drm_device *dev);
+extern void intel_opregion_free(struct drm_device *dev, int suspend);
extern void opregion_asle_intr(struct drm_device *dev);
extern void opregion_enable_asle(struct drm_device *dev);
#else
static inline int intel_opregion_init(struct drm_device *dev, int resume) { return 0; }
-static inline void intel_opregion_free(struct drm_device *dev) { return; }
+static inline void intel_opregion_free(struct drm_device *dev, int suspend) { return; }
static inline void opregion_asle_intr(struct drm_device *dev) { return; }
static inline void opregion_enable_asle(struct drm_device *dev) { return; }
#endif
(dev)->pci_device == 0x2A42 || \
(dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22)
+ (dev)->pci_device == 0x2E22 || \
+ (dev)->pci_device == 0x2E32)
#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
+ (dev)->pci_device == 0x2E32 || \
IS_GM45(dev))
#define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
dev_priv->mm.suspended = 0;
ret = i915_gem_init_ringbuffer(dev);
- if (ret != 0)
+ if (ret != 0) {
+ mutex_unlock(&dev->struct_mutex);
return ret;
+ }
spin_lock(&dev_priv->mm.active_list_lock);
BUG_ON(!list_empty(&dev_priv->mm.active_list));
mutex_lock(&dev->struct_mutex);
if (args->tiling_mode == I915_TILING_NONE) {
- obj_priv->tiling_mode = I915_TILING_NONE;
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
} else {
if (args->tiling_mode == I915_TILING_X)
drm_i915_irq_emit_t *emit = data;
int result;
- if (!dev_priv) {
+ if (!dev_priv || !dev_priv->ring.virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (mboxes & MBOX_ACPI) {
DRM_DEBUG("Public ACPI methods supported\n");
opregion->acpi = base + OPREGION_ACPI_OFFSET;
- if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
intel_didl_outputs(dev);
- if (!resume)
- acpi_video_register();
- }
} else {
DRM_DEBUG("Public ACPI methods not supported\n");
err = -ENOTSUPP;
if (mboxes & MBOX_ASLE) {
DRM_DEBUG("ASLE supported\n");
opregion->asle = base + OPREGION_ASLE_OFFSET;
+ opregion_enable_asle(dev);
}
+ if (!resume)
+ acpi_video_register();
+
+
/* Notify BIOS we are ready to handle ACPI video ext notifs.
* Right now, all the events are handled by the ACPI video module.
* We don't actually need to do anything with them. */
return err;
}
-void intel_opregion_free(struct drm_device *dev)
+void intel_opregion_free(struct drm_device *dev, int suspend)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
if (!opregion->enabled)
return;
+ if (!suspend)
+ acpi_video_exit();
+
opregion->acpi->drdy = 0;
system_opregion = NULL;
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+#define DISPPLANE_TILED (1<<10)
#define DSPAADDR 0x70184
#define DSPASTRIDE 0x70188
#define DSPAPOS 0x7018C /* reserved */
int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF);
int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
int ret;
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
+ if (IS_I965G(dev)) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ dspcntr |= DISPPLANE_TILED;
+ else
+ dspcntr &= ~DISPPLANE_TILED;
+ }
+
I915_WRITE(dspcntr_reg, dspcntr);
Start = obj_priv->gtt_offset;
I915_READ(dspbase);
I915_WRITE(dspsurf, Start);
I915_READ(dspsurf);
+ I915_WRITE(dsptileoff, (y << 16) | x);
} else {
I915_WRITE(dspbase, Start + Offset);
I915_READ(dspbase);
#if __OS_HAS_AGP
if (!dev_priv->is_pci) {
- drm_core_ioremap(dev_priv->cce_ring, dev);
- drm_core_ioremap(dev_priv->ring_rptr, dev);
- drm_core_ioremap(dev->agp_buffer_map, dev);
+ drm_core_ioremap_wc(dev_priv->cce_ring, dev);
+ drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
+ drm_core_ioremap_wc(dev->agp_buffer_map, dev);
if (!dev_priv->cce_ring->handle ||
!dev_priv->ring_rptr->handle ||
!dev->agp_buffer_map->handle) {
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
+ * 1.30- Add support for occlusion queries
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 29
+#define DRIVER_MINOR 30
#define DRIVER_PATCHLEVEL 0
/*
if (fnmode) {
int do_translate;
- trans = apple_find_translation((hid->product < 0x220 ||
+ trans = apple_find_translation((hid->product < 0x21d ||
hid->product >= 0x300) ?
powerbook_fn_keys : apple_fn_keys,
usage->code);
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
struct hid_input *hidinput;
int i;
+ if (!(hid->claimed & HID_CLAIMED_INPUT))
+ return 0;
+
list_for_each_entry(hidinput, &hid->inputs, list) {
for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++)
if (hidinput->input->key[i])
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
+#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299
#define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2),
.driver_data = LG_FF },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
+ .driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
{ }
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
- if (!hid->name)
- return 0;
+ if (!hid->name) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
int len;
- if (!hid->phys)
- return 0;
+ if (!hid->phys) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
spin_lock_irq(&usbhid->lock);
if (!--hid->open) {
spin_unlock_irq(&usbhid->lock);
+ hid_cancel_delayed_stuff(usbhid);
usb_kill_urb(usbhid->urbin);
- flush_scheduled_work();
usbhid->intf->needs_remote_wakeup = 0;
} else {
spin_unlock_irq(&usbhid->lock);
* chips may hold it low ("clock stretching") while they
* are processing data internally.
*/
- if (time_after_eq(jiffies, start + adap->timeout))
+ if (time_after(jiffies, start + adap->timeout))
return -ETIMEDOUT;
cond_resched();
}
case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after data byte\n");
+ pca_stop(adap);
goto out;
case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
DEB2("Arbitration lost\n");
+ /*
+ * The PCA9564 data sheet (2006-09-01) says "A
+ * START condition will be transmitted when the
+ * bus becomes free (STOP or SCL and SDA high)"
+ * when the STA bit is set (p. 11).
+ *
+ * In case this won't work, try pca_reset()
+ * instead.
+ */
+ pca_start(adap);
goto out;
case 0x58: /* Data byte has been received; NOT ACK has been returned */
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
(timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
goto abort;
}
} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Completion timeout!\n");
goto abort;
}
status = inb_p(SMBHSTSTS);
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
} while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT)
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
- }
+
outb_p(status, SMBHSTSTS);
}
while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
temp = inb_p(NVIDIA_SMB_STS);
} while ((!temp) && (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
if (smbus->can_abort)
nforce2_abort(adap);
} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
result = -ETIMEDOUT;
}
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->rq;
int err, sense_key, do_end_request = 0;
- u8 quiet = rq->cmd_flags & REQ_QUIET;
/* get the IDE error register */
err = ide_read_error(drive);
} else {
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) && !quiet)
+ if (blk_fs_request(rq) && !blk_rq_quiet(rq))
printk(KERN_ERR PFX "%s: tray open\n",
drive->name);
}
* No point in retrying after an illegal request or data
* protect error.
*/
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "command error", stat);
do_end_request = 1;
break;
* No point in re-trying a zillion times on a bad sector.
* If we got here the error is not correctable.
*/
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "media error "
"(bad sector)", stat);
do_end_request = 1;
break;
case BLANK_CHECK:
/* disk appears blank? */
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "media error (blank)",
stat);
do_end_request = 1;
struct request *rq = hwif->rq;
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, thislen, uptodate = 0;
- int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
int sense = blk_sense_request(rq);
unsigned int timeout;
u16 len;
#include <linux/mutex.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
+#include <linux/dmi.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
(void)drive->disk_ops->get_capacity(drive);
}
+static const struct dmi_system_id ide_coldreboot_table[] = {
+ {
+ /* Acer TravelMate 66x cuts power during reboot */
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
+
+ { } /* terminate list */
+};
+
static void ide_gd_shutdown(ide_drive_t *drive)
{
#ifdef CONFIG_ALPHA
the disk to expire its write cache. */
if (system_state != SYSTEM_POWER_OFF) {
#else
- if (system_state == SYSTEM_RESTART) {
+ if (system_state == SYSTEM_RESTART &&
+ !dmi_check_system(ide_coldreboot_table)) {
#endif
drive->disk_ops->flush(drive);
return;
/* Primary Control Offset */
#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
-/*
- * PalmChip 3710 IDE Controller UDMA timing structure Definition
- */
-struct palm_bk3710_udmatiming {
- unsigned int rptime; /* Ready to pause time */
- unsigned int cycletime; /* Cycle Time */
-};
-
#define BK3710_BMICP 0x00
#define BK3710_BMISP 0x02
#define BK3710_BMIDTP 0x04
-#define BK3710_BMICS 0x08
-#define BK3710_BMISS 0x0A
-#define BK3710_BMIDTS 0x0C
#define BK3710_IDETIMP 0x40
-#define BK3710_IDETIMS 0x42
-#define BK3710_SIDETIM 0x44
-#define BK3710_SLEWCTL 0x45
#define BK3710_IDESTATUS 0x47
#define BK3710_UDMACTL 0x48
-#define BK3710_UDMATIM 0x4A
#define BK3710_MISCCTL 0x50
#define BK3710_REGSTB 0x54
#define BK3710_REGRCVR 0x58
#define BK3710_UDMATRP 0x70
#define BK3710_UDMAENV 0x74
#define BK3710_IORDYTMP 0x78
-#define BK3710_IORDYTMS 0x7C
static unsigned ideclk_period; /* in nanoseconds */
+struct palm_bk3710_udmatiming {
+ unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
+ unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+ /* tENV is always a minimum of 20 nsec */
+};
+
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
- {160, 240}, /* UDMA Mode 0 */
- {125, 160}, /* UDMA Mode 1 */
- {100, 120}, /* UDMA Mode 2 */
- {100, 90}, /* UDMA Mode 3 */
- {100, 60}, /* UDMA Mode 4 */
- {85, 40}, /* UDMA Mode 5 */
+ { 160, 240 / 2 }, /* UDMA Mode 0 */
+ { 125, 160 / 2 }, /* UDMA Mode 1 */
+ { 100, 120 / 2 }, /* UDMA Mode 2 */
+ { 100, 90 / 2 }, /* UDMA Mode 3 */
+ { 100, 60 / 2 }, /* UDMA Mode 4 */
+ { 85, 40 / 2 }, /* UDMA Mode 5 */
};
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
ideclk_period) - 1;
- /* udmatim Register */
- val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
- val16 |= (mode << (dev ? 4 : 0));
- writew(val16, base + BK3710_UDMATIM);
-
/* udmastb Ultra DMA Access Strobe Width */
val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
val32 |= (t0 << (dev ? 8 : 0));
u32 val32;
struct ide_timing *t;
+ t = ide_timing_find_mode(XFER_PIO_0 + mode);
+
/* PIO Data Setup */
t0 = DIV_ROUND_UP(cycletime, ideclk_period);
- t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
- ideclk_period);
+ t2 = DIV_ROUND_UP(t->active, ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
}
/* TASKFILE Setup */
- t = ide_timing_find_mode(XFER_PIO_0 + mode);
t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
static void __devinit palm_bk3710_chipinit(void __iomem *base)
{
/*
- * enable the reset_en of ATA controller so that when ata signals
- * are brought out, by writing into device config. at that
- * time por_n signal should not be 'Z' and have a stable value.
+ * REVISIT: the ATA reset signal needs to be managed through a
+ * GPIO, which means it should come from platform_data. Until
+ * we get and use such information, we have to trust that things
+ * have been reset before we get here.
*/
- writel(0x0300, base + BK3710_MISCCTL);
-
- /* wait for some time and deassert the reset of ATA Device. */
- mdelay(100);
-
- /* Deassert the Reset */
- writel(0x0200, base + BK3710_MISCCTL);
/*
* Program the IDETIMP Register Value based on the following assumptions
*
* (ATA_IDETIMP_IDEEN , ENABLE ) |
- * (ATA_IDETIMP_SLVTIMEN , DISABLE) |
- * (ATA_IDETIMP_RDYSMPL , 70NS) |
- * (ATA_IDETIMP_RDYRCVRY , 50NS) |
- * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) |
* (ATA_IDETIMP_PREPOST1 , DISABLE) |
- * (ATA_IDETIMP_RDYSEN1 , DISABLE) |
- * (ATA_IDETIMP_PIOFTIM1 , DISABLE) |
- * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) |
* (ATA_IDETIMP_PREPOST0 , DISABLE) |
- * (ATA_IDETIMP_RDYSEN0 , DISABLE) |
- * (ATA_IDETIMP_PIOFTIM0 , DISABLE)
- */
- writew(0xB388, base + BK3710_IDETIMP);
-
- /*
- * Configure SIDETIM Register
- * (ATA_SIDETIM_RDYSMPS1 ,120NS ) |
- * (ATA_SIDETIM_RDYRCYS1 ,120NS )
+ *
+ * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+ * from enabling prefetch/postwrite.
*/
- writeb(0, base + BK3710_SIDETIM);
+ writew(BIT(15), base + BK3710_IDETIMP);
/*
* UDMACTL Ultra-ATA DMA Control
/*
* MISCCTL Miscellaneous Conrol Register
- * (ATA_MISCCTL_RSTMODEP , 1) |
- * (ATA_MISCCTL_RESETP , 0) |
+ * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
+ * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
* (ATA_MISCCTL_TIMORIDE , 1)
*/
- writel(0x201, base + BK3710_MISCCTL);
+ writel(0x001, base + BK3710_MISCCTL);
/*
* IORDYTMP IORDY Timer for Primary Register
clk_enable(clk);
rate = clk_get_rate(clk);
- ideclk_period = 1000000000UL / rate;
- /* Register the IDE interface with Linux ATA Interface */
- memset(&hw, 0, sizeof(hw));
+ /* NOTE: round *down* to meet minimum timings; we count in clocks */
+ ideclk_period = 1000000000UL / rate;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mem == NULL) {
/* Configure the Palm Chip controller */
palm_bk3710_chipinit(base);
+ memset(&hw, 0, sizeof(hw));
for (i = 0; i < IDE_NR_PORTS - 2; i++)
hw.io_ports_array[i] = (unsigned long)
(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
ATA_UDMA5;
+ /* Register the IDE interface with Linux */
rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
if (rc)
goto out;
ep->com.rpl_err = 0;
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
+
+ if (peer2peer && ep->ird == 0)
+ ep->ird = 1;
+
PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
get_ep(&ep->com);
conn_param->private_data, ep->plen);
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
+
+ if (peer2peer && ep->ord == 0)
+ ep->ord = 1;
+
ep->com.tdev = h->rdev.t3cdev_p;
cm_id->add_ref(cm_id);
goto out;
}
qhp->attr.state = IWCH_QP_STATE_IDLE;
- memset(&qhp->attr, 0, sizeof(qhp->attr));
break;
case IWCH_QP_STATE_TERMINATE:
if (!internal) {
enum {
CMD_TIME_CLASS_A = (HZ + 999) / 1000 + 1,
CMD_TIME_CLASS_B = (HZ + 99) / 100 + 1,
- CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1
+ CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1,
+ CMD_TIME_CLASS_D = 60 * HZ
};
#else
enum {
CMD_TIME_CLASS_A = 60 * HZ,
CMD_TIME_CLASS_B = 60 * HZ,
- CMD_TIME_CLASS_C = 60 * HZ
+ CMD_TIME_CLASS_C = 60 * HZ,
+ CMD_TIME_CLASS_D = 60 * HZ
};
#endif
u64 out;
int ret;
- ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, HZ, status);
+ ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D, status);
if (*status == MTHCA_CMD_STAT_DDR_MEM_ERR)
mthca_warn(dev, "SYS_EN DDR error: syn=%x, sock=%d, "
int mthca_SYS_DIS(struct mthca_dev *dev, u8 *status)
{
- return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, HZ, status);
+ return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, CMD_TIME_CLASS_C, status);
}
static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm,
MTHCA_PUT(inbox, param->uarc_base, INIT_HCA_UAR_CTX_BASE_OFFSET);
}
- err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, HZ, status);
+ err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, CMD_TIME_CLASS_D, status);
mthca_free_mailbox(dev, mailbox);
return err;
int mthca_CLOSE_IB(struct mthca_dev *dev, int port, u8 *status)
{
- return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, HZ, status);
+ return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, CMD_TIME_CLASS_A, status);
}
int mthca_CLOSE_HCA(struct mthca_dev *dev, int panic, u8 *status)
{
- return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, HZ, status);
+ return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, CMD_TIME_CLASS_C, status);
}
int mthca_SET_IB(struct mthca_dev *dev, struct mthca_set_ib_param *param,
#define QUEUE_DISCONNECTS
-#define DRV_BUILD "1"
-
#define DRV_NAME "iw_nes"
-#define DRV_VERSION "1.0 KO Build " DRV_BUILD
+#define DRV_VERSION "1.5.0.0"
#define PFX DRV_NAME ": "
/*
#include <net/neighbour.h>
#include <net/route.h>
#include <net/ip_fib.h>
+#include <net/tcp.h>
#include "nes.h"
struct list_head *list_node;
struct nes_cm_core *cm_core = g_cm_core;
u32 settimer = 0;
+ unsigned long timetosend;
int ret = NETDEV_TX_OK;
struct list_head timer_list;
send_entry->retrycount);
if (send_entry->send_retrans) {
send_entry->retranscount--;
+ timetosend = (NES_RETRY_TIMEOUT <<
+ (NES_DEFAULT_RETRANS - send_entry->retranscount));
+
send_entry->timetosend = jiffies +
- NES_RETRY_TIMEOUT;
+ min(timetosend, NES_MAX_TIMEOUT);
if (nexttimeout > send_entry->timetosend ||
!settimer) {
nexttimeout = send_entry->timetosend;
{
unsigned long flags;
struct nes_cm_listener *listen_node;
- __be32 tmp_addr = cpu_to_be32(dst_addr);
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->listen_list_lock, flags);
}
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
- nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
- &tmp_addr, dst_port);
-
/* no listener */
return NULL;
}
nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
"refcnt=%d\n", cm_node, cm_node->state,
atomic_read(&cm_node->ref_count));
- cm_node->tcp_cntxt.rcv_nxt++;
- cleanup_retrans_entry(cm_node);
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
case NES_CM_STATE_SYN_SENT:
case NES_CM_STATE_ESTABLISHED:
case NES_CM_STATE_MPAREQ_SENT:
case NES_CM_STATE_MPAREJ_RCVD:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_LAST_ACK;
send_fin(cm_node, NULL);
break;
case NES_CM_STATE_FIN_WAIT1:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSING;
send_ack(cm_node, NULL);
/* Wait for ACK as this is simultanous close..
* Just rm the node.. Done.. */
break;
case NES_CM_STATE_FIN_WAIT2:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_TIME_WAIT;
send_ack(cm_node, NULL);
schedule_nes_timer(cm_node, NULL, NES_TIMER_TYPE_CLOSE, 1, 0);
break;
case NES_CM_STATE_TIME_WAIT:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
rem_ref_cm_node(cm_node->cm_core, cm_node);
break;
passive_state = atomic_add_return(1, &cm_node->passive_state);
if (passive_state == NES_SEND_RESET_EVENT)
create_event(cm_node, NES_CM_EVENT_RESET);
- cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
dev_kfree_skb_any(skb);
break;
active_open_err(cm_node, skb, reset);
break;
case NES_CM_STATE_CLOSED:
- cleanup_retrans_entry(cm_node);
drop_packet(skb);
break;
+ case NES_CM_STATE_LAST_ACK:
+ cm_node->cm_id->rem_ref(cm_node->cm_id);
case NES_CM_STATE_TIME_WAIT:
- cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
case NES_CM_STATE_FIN_WAIT1:
- cleanup_retrans_entry(cm_node);
nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
default:
drop_packet(skb);
NES_PASSIVE_STATE_INDICATED);
break;
case NES_CM_STATE_MPAREQ_SENT:
+ cleanup_retrans_entry(cm_node);
if (res_type == NES_MPA_REQUEST_REJECT) {
type = NES_CM_EVENT_MPA_REJECT;
cm_node->state = NES_CM_STATE_MPAREJ_RCVD;
rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
if (ack_seq != loc_seq_num)
err = 1;
- else if ((seq + rcv_wnd) < rcv_nxt)
+ else if (!between(seq, rcv_nxt, (rcv_nxt+rcv_wnd)))
err = 1;
if (err) {
nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
}
}
-static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
struct tcphdr *tcph)
{
int datasize = 0;
u32 inc_sequence;
u32 rem_seq_ack;
u32 rem_seq;
- int ret;
+ int ret = 0;
int optionsize;
optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
if (check_seq(cm_node, tcph, skb))
- return;
+ return -EINVAL;
skb_pull(skb, tcph->doff << 2);
inc_sequence = ntohl(tcph->seq);
rem_seq = ntohl(tcph->seq);
rem_seq_ack = ntohl(tcph->ack_seq);
datasize = skb->len;
- cleanup_retrans_entry(cm_node);
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
/* Passive OPEN */
+ cleanup_retrans_entry(cm_node);
ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 1);
if (ret)
break;
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
- if (cm_node->tcp_cntxt.rem_ack_num !=
- cm_node->tcp_cntxt.loc_seq_num) {
- nes_debug(NES_DBG_CM, "rem_ack_num != loc_seq_num\n");
- cleanup_retrans_entry(cm_node);
- send_reset(cm_node, skb);
- return;
- }
cm_node->state = NES_CM_STATE_ESTABLISHED;
- cleanup_retrans_entry(cm_node);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else { /* rcvd ACK only */
+ } else /* rcvd ACK only */
dev_kfree_skb_any(skb);
- cleanup_retrans_entry(cm_node);
- }
break;
case NES_CM_STATE_ESTABLISHED:
/* Passive OPEN */
drop_packet(skb);
break;
case NES_CM_STATE_MPAREQ_SENT:
- cleanup_retrans_entry(cm_node);
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else { /* Could be just an ack pkt.. */
- cleanup_retrans_entry(cm_node);
+ } else /* Could be just an ack pkt.. */
dev_kfree_skb_any(skb);
- }
break;
case NES_CM_STATE_LISTENING:
case NES_CM_STATE_CLOSED:
send_reset(cm_node, skb);
break;
case NES_CM_STATE_LAST_ACK:
+ case NES_CM_STATE_CLOSING:
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
cm_node->cm_id->rem_ref(cm_node->cm_id);
- case NES_CM_STATE_CLOSING:
- cleanup_retrans_entry(cm_node);
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
case NES_CM_STATE_MPAREQ_RCVD:
case NES_CM_STATE_UNKNOWN:
default:
+ cleanup_retrans_entry(cm_node);
drop_packet(skb);
break;
}
+ return ret;
}
enum nes_tcpip_pkt_type pkt_type = NES_PKT_TYPE_UNKNOWN;
struct tcphdr *tcph = tcp_hdr(skb);
u32 fin_set = 0;
+ int ret = 0;
skb_pull(skb, ip_hdr(skb)->ihl << 2);
nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
handle_synack_pkt(cm_node, skb, tcph);
break;
case NES_PKT_TYPE_ACK:
- handle_ack_pkt(cm_node, skb, tcph);
- if (fin_set)
+ ret = handle_ack_pkt(cm_node, skb, tcph);
+ if (fin_set && !ret)
handle_fin_pkt(cm_node);
break;
case NES_PKT_TYPE_RST:
handle_rst_pkt(cm_node, skb, tcph);
break;
default:
- drop_packet(skb);
- if (fin_set)
+ if ((fin_set) && (!check_seq(cm_node, tcph, skb)))
handle_fin_pkt(cm_node);
+ drop_packet(skb);
break;
}
}
/* associate the node with the QP */
nesqp->cm_node = (void *)cm_node;
cm_node->nesqp = nesqp;
- nes_add_ref(&nesqp->ibqp);
nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n",
nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener);
nes_debug(NES_DBG_CM, "Unable to register memory region"
"for lSMM for cm_node = %p \n",
cm_node);
+ pci_free_consistent(nesdev->pcidev,
+ nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
+ nesqp->ietf_frame, nesqp->ietf_frame_pbase);
return -ENOMEM;
}
/* notify OF layer that accept event was successful */
cm_id->add_ref(cm_id);
+ nes_add_ref(&nesqp->ibqp);
cm_event.event = IW_CM_EVENT_ESTABLISHED;
cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
struct nes_device *nesdev;
struct nes_cm_node *cm_node;
struct nes_cm_info cm_info;
+ int apbvt_set = 0;
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
if (!ibqp)
conn_param->private_data_len);
if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr)
+ cm_id->remote_addr.sin_addr.s_addr) {
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+ apbvt_set = 1;
+ }
/* set up the connection params for the node */
cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr);
conn_param->private_data_len, (void *)conn_param->private_data,
&cm_info);
if (!cm_node) {
- if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr)
+ if (apbvt_set)
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
PCI_FUNC(nesdev->pcidev->devfn),
NES_MANAGE_APBVT_DEL);
return -ENOMEM;
}
- cm_node->apbvt_set = 1;
+ cm_node->apbvt_set = apbvt_set;
nesqp->cm_node = cm_node;
cm_node->nesqp = nesqp;
nes_add_ref(&nesqp->ibqp);
#endif
#define NES_SHORT_TIME (10)
#define NES_LONG_TIME (2000*HZ/1000)
+#define NES_MAX_TIMEOUT ((unsigned long) (12*HZ))
#define NES_CM_HASHTABLE_SIZE 1024
#define NES_CM_TCP_TIMER_INTERVAL 3000
msleep(1);
}
if (int_cnt > 1) {
- u32 sds;
spin_lock_irqsave(&nesadapter->phy_lock, flags);
- sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
- sds |= 0x00000040;
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F0C8);
mh_detected++;
reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
reset_value |= 0x0000003d;
if (++ext_cnt > int_cnt) {
spin_lock_irqsave(&nesadapter->phy_lock, flags);
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1,
- 0x0000F0C8);
+ 0x0000F088);
mh_detected++;
reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
reset_value |= 0x0000003d;
return 0;
/* init serdes 1 */
+ if (!(OneG_Mode && (nesadapter->phy_type[1] != NES_PHY_TYPE_PUMA_1G)))
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
+
switch (nesadapter->phy_type[1]) {
case NES_PHY_TYPE_ARGUS:
case NES_PHY_TYPE_SFP_D:
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000);
break;
case NES_PHY_TYPE_CX4:
- sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
- sds &= 0xFFFFFFBF;
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
if (wide_ppm_offset)
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000FFFAA);
- else
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
break;
case NES_PHY_TYPE_PUMA_1G:
sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
sds |= 0x000000100;
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
}
- if (!OneG_Mode)
+ if (!OneG_Mode) {
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000);
+ sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
+ sds &= 0xFFFFFFBF;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+ }
} else {
/* init serdes 0 */
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, 0x00000008);
u32temp &= 0x7fffffff;
u32temp |= 0x7fff0010;
nes_write_indexed(nesdev, 0x000021f8, u32temp);
+ if (port_count > 1) {
+ u32temp = nes_read_indexed(nesdev, 0x000023f8);
+ u32temp &= 0x7fffffff;
+ u32temp |= 0x7fff0010;
+ nes_write_indexed(nesdev, 0x000023f8, u32temp);
+ }
}
}
if (phy_type == NES_PHY_TYPE_ARGUS) {
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C);
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
} else {
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x0004);
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0038);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0013);
}
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098);
nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00);
- nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
/* setup LEDs */
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd006, 0x0007);
nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff;
else
nescq->hw_cq.cq_number = nesvnic->mcrq_qp_id + nes_ucontext->mcrqf-1;
+ nescq->mcrqf = nes_ucontext->mcrqf;
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
}
nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
+
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-EIO);
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX, opcode);
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX,
(nescq->hw_cq.cq_number | ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 16)));
- nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+ if (!nescq->mcrqf)
+ nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+
atomic_set(&cqp_request->refcount, 2);
nes_post_cqp_request(nesdev, cqp_request);
static u32 root_256(struct nes_device *nesdev,
struct nes_root_vpbl *root_vpbl,
struct nes_root_vpbl *new_root,
- u16 pbl_count_4k,
- u16 pbl_count_256)
+ u16 pbl_count_4k)
{
u64 leaf_pbl;
int i, j, k;
int ret;
struct nes_adapter *nesadapter = nesdev->nesadapter;
uint pg_cnt = 0;
- u16 pbl_count_256;
+ u16 pbl_count_256 = 0;
u16 pbl_count = 0;
u8 use_256_pbls = 0;
u8 use_4k_pbls = 0;
}
if (use_256_pbls && use_two_level) {
- if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k, pbl_count_256) == 1) {
+ if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k) == 1) {
if (new_root.pbl_pbase != 0)
root_vpbl = &new_root;
} else {
struct nes_root_vpbl root_vpbl;
u32 stag;
u32 i;
+ unsigned long mask;
u32 stag_index = 0;
u32 next_stag_index = 0;
u32 driver_key = 0;
return ERR_PTR(-E2BIG);
}
+ if ((buffer_list[0].addr ^ *iova_start) & ~PAGE_MASK)
+ return ERR_PTR(-EINVAL);
+
err = nes_alloc_resource(nesadapter, nesadapter->allocated_mrs, nesadapter->max_mr,
&stag_index, &next_stag_index);
if (err) {
root_pbl_index++;
cur_pbl_index = 0;
}
- if (buffer_list[i].addr & ~PAGE_MASK) {
- /* TODO: Unwind allocated buffers */
- nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
- nes_debug(NES_DBG_MR, "Unaligned Memory Buffer: 0x%x\n",
- (unsigned int) buffer_list[i].addr);
- ibmr = ERR_PTR(-EINVAL);
- kfree(nesmr);
- goto reg_phys_err;
- }
- if (!buffer_list[i].size) {
+ mask = !buffer_list[i].size;
+ if (i != 0)
+ mask |= buffer_list[i].addr;
+ if (i != num_phys_buf - 1)
+ mask |= buffer_list[i].addr + buffer_list[i].size;
+
+ if (mask & ~PAGE_MASK) {
nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
- nes_debug(NES_DBG_MR, "Invalid Buffer Size\n");
+ nes_debug(NES_DBG_MR, "Invalid buffer addr or size\n");
ibmr = ERR_PTR(-EINVAL);
kfree(nesmr);
goto reg_phys_err;
if ((buffer_list[i-1].addr+PAGE_SIZE) != buffer_list[i].addr)
single_page = 0;
}
- vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr);
+ vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr & PAGE_MASK);
vpbl.pbl_vbase[cur_pbl_index++].pa_high =
cpu_to_le32((u32)((((u64)buffer_list[i].addr) >> 32)));
}
" length = 0x%016lX, index = 0x%08X\n",
stag, (unsigned long)*iova_start, (unsigned long)region_length, stag_index);
- region_length -= (*iova_start)&PAGE_MASK;
-
/* Make the leaf PBL the root if only one PBL */
if (root_pbl_index == 1) {
root_vpbl.pbl_pbase = vpbl.pbl_pbase;
struct nes_vnic *nesvnic = nesibdev->nesvnic;
nes_debug(NES_DBG_INIT, "\n");
- return sprintf(buf, "%x.%x.%x\n",
- (int)(nesvnic->nesdev->nesadapter->fw_ver >> 32),
- (int)(nesvnic->nesdev->nesadapter->fw_ver >> 16) & 0xffff,
- (int)(nesvnic->nesdev->nesadapter->fw_ver & 0xffff));
+ return sprintf(buf, "%u.%u\n",
+ (nesvnic->nesdev->nesadapter->firmware_version >> 16),
+ (nesvnic->nesdev->nesadapter->firmware_version & 0x000000ff));
}
spinlock_t lock;
u8 virtual_cq;
u8 pad[3];
+ u32 mcrqf;
};
struct nes_wq {
queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
round_jiffies_relative(HZ));
- set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+ if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ napi_enable(&priv->napi);
return 0;
}
struct ipoib_tx_buf *tx_req;
int i;
- clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+ if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ napi_disable(&priv->napi);
ipoib_cm_dev_stop(dev);
ipoib_dbg(priv, "bringing up interface\n");
- if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
- napi_enable(&priv->napi);
+ set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
if (ipoib_pkey_dev_delay_open(dev))
return 0;
ipoib_ib_dev_stop(dev, 1);
err_disable:
- napi_disable(&priv->napi);
clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
return -EINVAL;
ipoib_dbg(priv, "stopping interface\n");
clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
- napi_disable(&priv->napi);
netif_stop_queue(dev);
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler= iscsi_eh_device_reset,
.eh_target_reset_handler= iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "iscsi_iser",
.this_id = -1,
#define INPUT_DEVICES 256
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+ ABS_MT_TOUCH_MAJOR,
+ ABS_MT_TOUCH_MINOR,
+ ABS_MT_WIDTH_MAJOR,
+ ABS_MT_WIDTH_MINOR,
+ ABS_MT_ORIENTATION,
+ ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y,
+ ABS_MT_TOOL_TYPE,
+ ABS_MT_BLOB_ID,
+ 0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
static LIST_HEAD(input_dev_list);
static LIST_HEAD(input_handler_list);
disposition = INPUT_PASS_TO_HANDLERS;
}
break;
+ case SYN_MT_REPORT:
+ dev->sync = 0;
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
}
break;
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX)) {
+ if (test_bit(code, input_abs_bypass)) {
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
+ }
+
value = input_defuzz_abs_event(value,
dev->abs[code], dev->absfuzz[code]);
.open = input_open_file,
};
+static void __init input_init_abs_bypass(void)
+{
+ const unsigned int *p;
+
+ for (p = input_abs_bypass_init_data; *p; p++)
+ input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
static int __init input_init(void)
{
int err;
+ input_init_abs_bypass();
+
err = class_register(&input_class);
if (err) {
printk(KERN_ERR "input: unable to register input_dev class\n");
/* disable keyboard interrupt and schedule for handling */
if (cpu_is_omap24xx()) {
int i;
- for (i = 0; i < omap_kp->rows; i++)
- disable_irq(gpio_to_irq(row_gpios[i]));
+
+ for (i = 0; i < omap_kp->rows; i++) {
+ int gpio_irq = gpio_to_irq(row_gpios[i]);
+ /*
+ * The interrupt which we're currently handling should
+ * be disabled _nosync() to avoid deadlocks waiting
+ * for this handler to complete. All others should
+ * be disabled the regular way for SMP safety.
+ */
+ if (gpio_irq == irq)
+ disable_irq_nosync(gpio_irq);
+ else
+ disable_irq(gpio_irq);
+ }
} else
/* disable keyboard interrupt and schedule for handling */
omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
#define ALPS_FW_BK_2 0x40
static const struct alps_model_info alps_model_data[] = {
+ { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
{ { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
{ { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
{ { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
*/
static int atp_geyser_init(struct usb_device *udev)
{
- char data[8];
+ char *data;
int size;
int i;
+ int ret;
+
+ data = kmalloc(8, GFP_KERNEL);
+ if (!data) {
+ err("Out of memory");
+ return -ENOMEM;
+ }
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: read error\n");
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to read mode from device.");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
/* Apply the mode switch */
ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: write error\n");
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to request geyser raw mode");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
- return 0;
+ ret = 0;
+out_free:
+ kfree(data);
+ return ret;
}
/*
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+/* Macbook5,1 (unibody), aka wellspring3 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+ /* Macbook5,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
/* Terminating entry */
{}
};
u8 rel_y; /* relative y coordinate */
};
-/* trackpad header structure */
-struct tp_header {
- u8 unknown1[16]; /* constants, timers, etc */
- u8 fingers; /* number of fingers on trackpad */
- u8 unknown2[9]; /* constants, timers, etc */
+/* trackpad header types */
+enum tp_type {
+ TYPE1, /* plain trackpad */
+ TYPE2 /* button integrated in trackpad */
};
-/* trackpad finger structure */
+/* trackpad finger data offsets, le16-aligned */
+#define FINGER_TYPE1 (13 * sizeof(__le16))
+#define FINGER_TYPE2 (15 * sizeof(__le16))
+
+/* trackpad button data offsets */
+#define BUTTON_TYPE2 15
+
+/* list of device capability bits */
+#define HAS_INTEGRATED_BUTTON 1
+
+/* trackpad finger structure, le16-aligned */
struct tp_finger {
__le16 origin; /* zero when switching track finger */
__le16 abs_x; /* absolute x coodinate */
__le16 force_minor; /* trackpad force, minor axis? */
__le16 unused[3]; /* zeros */
__le16 multi; /* one finger: varies, more fingers: constant */
-};
+} __attribute__((packed,aligned(2)));
-/* trackpad data structure, empirically at least ten fingers */
-struct tp_data {
- struct tp_header header;
- struct tp_finger finger[16];
-};
+/* trackpad finger data size, empirically at least ten fingers */
+#define SIZEOF_FINGER sizeof(struct tp_finger)
+#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
/* device-specific parameters */
struct bcm5974_param {
/* device-specific configuration */
struct bcm5974_config {
int ansi, iso, jis; /* the product id of this device */
+ int caps; /* device capability bitmask */
int bt_ep; /* the endpoint of the button interface */
int bt_datalen; /* data length of the button interface */
int tp_ep; /* the endpoint of the trackpad interface */
+ enum tp_type tp_type; /* type of trackpad interface */
+ int tp_offset; /* offset to trackpad finger data */
int tp_datalen; /* data length of the trackpad interface */
struct bcm5974_param p; /* finger pressure limits */
struct bcm5974_param w; /* finger width limits */
struct urb *bt_urb; /* button usb request block */
struct bt_data *bt_data; /* button transferred data */
struct urb *tp_urb; /* trackpad usb request block */
- struct tp_data *tp_data; /* trackpad transferred data */
+ u8 *tp_data; /* trackpad transferred data */
int fingers; /* number of fingers on trackpad */
};
USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4460, 5166 },
+ { DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
+ },
{}
};
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
}
if (size != sizeof(struct bt_data))
return -EIO;
+ dprintk(7,
+ "bcm5974: button data: %x %x %x %x\n",
+ dev->bt_data->unknown1, dev->bt_data->button,
+ dev->bt_data->rel_x, dev->bt_data->rel_y);
+
input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
input_sync(dev->input);
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
- const struct tp_finger *f = dev->tp_data->finger;
+ const struct tp_finger *f;
struct input_dev *input = dev->input;
- const int fingers = (size - 26) / 28;
- int raw_p, raw_w, raw_x, raw_y;
- int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+ int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
- if (size < 26 || (size - 26) % 28 != 0)
+ if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
return -EIO;
+ /* finger data, le16-aligned */
+ f = (const struct tp_finger *)(dev->tp_data + c->tp_offset);
+ raw_n = (size - c->tp_offset) / SIZEOF_FINGER;
+
/* always track the first finger; when detached, start over */
- if (fingers) {
+ if (raw_n) {
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
raw_y = raw2int(f->abs_y);
dprintk(9,
- "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
- raw_p, raw_w, raw_x, raw_y);
+ "bcm5974: "
+ "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ raw_p, raw_w, raw_x, raw_y, raw_n);
ptest = int2bound(&c->p, raw_p);
origin = raw2int(f->origin);
+
+ /* set the integrated button if applicable */
+ if (c->tp_type == TYPE2)
+ ibt = raw2int(dev->tp_data[BUTTON_TYPE2]);
}
/* while tracking finger still valid, count all fingers */
abs_w = int2bound(&c->w, raw_w);
abs_x = int2bound(&c->x, raw_x - c->x.devmin);
abs_y = int2bound(&c->y, c->y.devmax - raw_y);
- for (; f != dev->tp_data->finger + fingers; f++) {
+ while (raw_n--) {
ptest = int2bound(&c->p, raw2int(f->force_major));
if (ptest > PRESSURE_LOW)
nmax++;
if (ptest > PRESSURE_HIGH)
nmin++;
+ f++;
}
}
input_report_key(input, BTN_TOUCH, dev->fingers > 0);
input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
- input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3);
+ input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3);
input_report_abs(input, ABS_PRESSURE, abs_p);
input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
dprintk(8,
"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
- "nmin: %d nmax: %d n: %d\n",
- abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+ "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+ abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
}
+ /* type 2 reports button events via ibt only */
+ if (c->tp_type == TYPE2)
+ input_report_key(input, BTN_LEFT, ibt);
+
input_sync(input);
return 0;
input_dev->name = "bcm5974";
input_dev->phys = dev->phys;
usb_to_input_id(dev->udev, &input_dev->id);
+ /* report driver capabilities via the version field */
+ input_dev->id.version = cfg->caps;
input_dev->dev.parent = &iface->dev;
input_set_drvdata(input_dev, dev);
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-200
8 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-200
9 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
+ static int old_fingers;
if (etd->fw_version_maj == 0x01) {
/* byte 0: D U p1 p2 1 p3 R L
fingers = (packet[0] & 0xc0) >> 6;
}
+ if (etd->jumpy_cursor) {
+ /* Discard packets that are likely to have bogus coordinates */
+ if (fingers > old_fingers) {
+ elantech_debug("elantech.c: discarding packet\n");
+ goto discard_packet_v1;
+ }
+ }
+
input_report_key(dev, BTN_TOUCH, fingers != 0);
/* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
}
input_sync(dev);
+
+ discard_packet_v1:
+ old_fingers = fingers;
}
/*
rc = -1;
break;
}
+ }
+
+ if (rc == 0) {
/*
- * Read back reg 0x10. The touchpad is probably initalising
- * and not ready until we read back the value we just wrote.
+ * Read back reg 0x10. For hardware version 1 we must make
+ * sure the absolute mode bit is set. For hardware version 2
+ * the touchpad is probably initalising and not ready until
+ * we read back the value we just wrote.
*/
do {
rc = elantech_read_reg(psmouse, 0x10, &val);
break;
tries--;
elantech_debug("elantech.c: retrying read (%d).\n",
- tries);
+ tries);
msleep(ETP_READ_BACK_DELAY);
} while (tries > 0);
- if (rc)
+
+ if (rc) {
pr_err("elantech.c: failed to read back register 0x10.\n");
- break;
+ } else if (etd->hw_version == 1 &&
+ !(val & ETP_R10_ABSOLUTE_MODE)) {
+ pr_err("elantech.c: touchpad refuses "
+ "to switch to absolute mode.\n");
+ rc = -1;
+ }
}
if (rc)
param[0], param[1], param[2]);
etd->capabilities = param[0];
+ /*
+ * This firmware seems to suffer from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+ pr_info("elantech.c: firmware version 2.34 detected, "
+ "enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = 1;
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
goto init_fail;
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-200
8 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-200
9 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
unsigned char fw_version_min;
unsigned char hw_version;
unsigned char paritycheck;
+ unsigned char jumpy_cursor;
unsigned char parity[256];
};
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
+ {
+ .ident = "Lifebook B-2130",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
+ },
+ },
{
.ident = "Lifebook B213x/B2150",
.matches = {
* SEGA Dreamcast mouse driver
* Based on drivers/usb/usbmouse.c
*
- * Copyright Yaegashi Takeshi, 2001
- * Adrian McMenamin, 2008
+ * Copyright (c) Yaegashi Takeshi, 2001
+ * Copyright (c) Adrian McMenamin, 2008 - 2009
*/
#include <linux/kernel.h>
struct maple_device *mapledev = mq->dev;
struct dc_mouse *mse = maple_get_drvdata(mapledev);
struct input_dev *dev = mse->dev;
- unsigned char *res = mq->recvbuf;
+ unsigned char *res = mq->recvbuf->buf;
buttons = ~res[8];
relx = *(unsigned short *)(res + 12) - 512;
static int dc_mouse_open(struct input_dev *dev)
{
- struct dc_mouse *mse = dev->dev.platform_data;
+ struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50,
MAPLE_FUNC_MOUSE);
static void dc_mouse_close(struct input_dev *dev)
{
- struct dc_mouse *mse = dev->dev.platform_data;
+ struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
maple_getcond_callback(mse->mdev, dc_mouse_callback, 0,
MAPLE_FUNC_MOUSE);
}
-
+/* allow the mouse to be used */
static int __devinit probe_maple_mouse(struct device *dev)
{
struct maple_device *mdev = to_maple_dev(dev);
struct maple_driver *mdrv = to_maple_driver(dev->driver);
+ int error;
struct input_dev *input_dev;
struct dc_mouse *mse;
- int error;
mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL);
- input_dev = input_allocate_device();
-
- if (!mse || !input_dev) {
+ if (!mse) {
error = -ENOMEM;
goto fail;
}
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ error = -ENOMEM;
+ goto fail_nomem;
+ }
+
mse->dev = input_dev;
mse->mdev = mdev;
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
BIT_MASK(REL_WHEEL);
- input_dev->name = mdev->product_name;
- input_dev->id.bustype = BUS_HOST;
input_dev->open = dc_mouse_open;
input_dev->close = dc_mouse_close;
+ input_dev->name = mdev->product_name;
+ input_dev->id.bustype = BUS_HOST;
+ error = input_register_device(input_dev);
+ if (error)
+ goto fail_register;
mdev->driver = mdrv;
maple_set_drvdata(mdev, mse);
- error = input_register_device(input_dev);
- if (error)
- goto fail;
-
- return 0;
+ return error;
-fail:
+fail_register:
input_free_device(input_dev);
- maple_set_drvdata(mdev, NULL);
+fail_nomem:
kfree(mse);
- mdev->driver = NULL;
+fail:
return error;
}
spin_lock(&ps2if->lock);
status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
if (ps2if->head == ps2if->tail) {
- disable_irq(irq);
+ disable_irq_nosync(irq);
/* done */
} else if (status & PS2STAT_TXE) {
sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-200
8 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-200
9 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
* v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
+ * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.49"
+#define DRIVER_VERSION "v1.50"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
5000); /* 5 secs */
} while (result < 0 && limit++ < 5);
+ /* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
goto out;
}
}
- result = 0;
-
out:
+ result = 0;
kfree(report);
return result;
}
endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ /* Initialize touch_x_max and touch_y_max in case it is not defined */
+ if (wacom_wac->features->type == TABLETPC) {
+ features->touch_x_max = 1023;
+ features->touch_y_max = 1023;
+ } else {
+ features->touch_x_max = 0;
+ features->touch_y_max = 0;
+ }
+
/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
if (wacom_wac->features->type == TABLETPC) {
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
spin_lock_irqsave(&ts->lock, flags);
if (likely(ts->get_pendown_state())) {
- disable_irq(ts->irq);
+ disable_irq_nosync(ts->irq);
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
}
struct ucb1400_ts *ucb = devid;
if (irqnr == ucb->irq) {
- disable_irq(ucb->irq);
+ disable_irq_nosync(ucb->irq);
ucb->irq_pending = 1;
wake_up(&ucb->ts_wait);
return IRQ_HANDLED;
mutex_unlock(&ap->recv_mtx);
}
+/**
+ * capi_ctr_handle_message() - handle incoming CAPI message
+ * @card: controller descriptor structure.
+ * @appl: application ID.
+ * @skb: message.
+ *
+ * Called by hardware driver to pass a CAPI message to the application.
+ */
+
void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb)
{
struct capi20_appl *ap;
EXPORT_SYMBOL(capi_ctr_handle_message);
+/**
+ * capi_ctr_ready() - signal CAPI controller ready
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to signal that the controller is up and running.
+ */
+
void capi_ctr_ready(struct capi_ctr * card)
{
card->cardstate = CARD_RUNNING;
EXPORT_SYMBOL(capi_ctr_ready);
+/**
+ * capi_ctr_reseted() - signal CAPI controller reset
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to signal that the controller is down and
+ * unavailable for use.
+ */
+
void capi_ctr_reseted(struct capi_ctr * card)
{
u16 appl;
EXPORT_SYMBOL(capi_ctr_reseted);
+/**
+ * capi_ctr_suspend_output() - suspend controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to stop data flow.
+ */
+
void capi_ctr_suspend_output(struct capi_ctr *card)
{
if (!card->blocked) {
EXPORT_SYMBOL(capi_ctr_suspend_output);
+/**
+ * capi_ctr_resume_output() - resume controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to resume data flow.
+ */
+
void capi_ctr_resume_output(struct capi_ctr *card)
{
if (card->blocked) {
/* ------------------------------------------------------------- */
+/**
+ * attach_capi_ctr() - register CAPI controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to register a controller with the CAPI subsystem.
+ * Return value: 0 on success, error code < 0 on error
+ */
+
int
attach_capi_ctr(struct capi_ctr *card)
{
EXPORT_SYMBOL(attach_capi_ctr);
+/**
+ * detach_capi_ctr() - unregister CAPI controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to remove the registration of a controller
+ * with the CAPI subsystem.
+ * Return value: 0 on success, error code < 0 on error
+ */
+
int detach_capi_ctr(struct capi_ctr *card)
{
if (card->cardstate != CARD_DETECTED)
EXPORT_SYMBOL(detach_capi_ctr);
+/**
+ * register_capi_driver() - register CAPI driver
+ * @driver: driver descriptor structure.
+ *
+ * Called by hardware driver to register itself with the CAPI subsystem.
+ */
+
void register_capi_driver(struct capi_driver *driver)
{
unsigned long flags;
EXPORT_SYMBOL(register_capi_driver);
+/**
+ * unregister_capi_driver() - unregister CAPI driver
+ * @driver: driver descriptor structure.
+ *
+ * Called by hardware driver to unregister itself from the CAPI subsystem.
+ */
+
void unregister_capi_driver(struct capi_driver *driver)
{
unsigned long flags;
/* -------- CAPI2.0 Interface ---------------------------------- */
/* ------------------------------------------------------------- */
+/**
+ * capi20_isinstalled() - CAPI 2.0 operation CAPI_INSTALLED
+ *
+ * Return value: CAPI result code (CAPI_NOERROR if at least one ISDN controller
+ * is ready for use, CAPI_REGNOTINSTALLED otherwise)
+ */
+
u16 capi20_isinstalled(void)
{
int i;
EXPORT_SYMBOL(capi20_isinstalled);
+/**
+ * capi20_register() - CAPI 2.0 operation CAPI_REGISTER
+ * @ap: CAPI application descriptor structure.
+ *
+ * Register an application's presence with CAPI.
+ * A unique application ID is assigned and stored in @ap->applid.
+ * After this function returns successfully, the message receive
+ * callback function @ap->recv_message() may be called at any time
+ * until capi20_release() has been called for the same @ap.
+ * Return value: CAPI result code
+ */
+
u16 capi20_register(struct capi20_appl *ap)
{
int i;
EXPORT_SYMBOL(capi20_register);
+/**
+ * capi20_release() - CAPI 2.0 operation CAPI_RELEASE
+ * @ap: CAPI application descriptor structure.
+ *
+ * Terminate an application's registration with CAPI.
+ * After this function returns successfully, the message receive
+ * callback function @ap->recv_message() will no longer be called.
+ * Return value: CAPI result code
+ */
+
u16 capi20_release(struct capi20_appl *ap)
{
int i;
EXPORT_SYMBOL(capi20_release);
+/**
+ * capi20_put_message() - CAPI 2.0 operation CAPI_PUT_MESSAGE
+ * @ap: CAPI application descriptor structure.
+ * @skb: CAPI message.
+ *
+ * Transfer a single message to CAPI.
+ * Return value: CAPI result code
+ */
+
u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_put_message);
+/**
+ * capi20_get_manufacturer() - CAPI 2.0 operation CAPI_GET_MANUFACTURER
+ * @contr: controller number.
+ * @buf: result buffer (64 bytes).
+ *
+ * Retrieve information about the manufacturer of the specified ISDN controller
+ * or (for @contr == 0) the driver itself.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_manufacturer(u32 contr, u8 *buf)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_get_manufacturer);
+/**
+ * capi20_get_version() - CAPI 2.0 operation CAPI_GET_VERSION
+ * @contr: controller number.
+ * @verp: result structure.
+ *
+ * Retrieve version information for the specified ISDN controller
+ * or (for @contr == 0) the driver itself.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_version(u32 contr, struct capi_version *verp)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_get_version);
+/**
+ * capi20_get_serial() - CAPI 2.0 operation CAPI_GET_SERIAL_NUMBER
+ * @contr: controller number.
+ * @serial: result buffer (8 bytes).
+ *
+ * Retrieve the serial number of the specified ISDN controller
+ * or (for @contr == 0) the driver itself.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_serial(u32 contr, u8 *serial)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_get_serial);
+/**
+ * capi20_get_profile() - CAPI 2.0 operation CAPI_GET_PROFILE
+ * @contr: controller number.
+ * @profp: result structure.
+ *
+ * Retrieve capability information for the specified ISDN controller
+ * or (for @contr == 0) the number of installed controllers.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_profile(u32 contr, struct capi_profile *profp)
{
struct capi_ctr *card;
}
#endif
+/**
+ * capi20_manufacturer() - CAPI 2.0 operation CAPI_MANUFACTURER
+ * @cmd: command.
+ * @data: parameter.
+ *
+ * Perform manufacturer specific command.
+ * Return value: CAPI result code
+ */
+
int capi20_manufacturer(unsigned int cmd, void __user *data)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_manufacturer);
/* temporary hack */
+
+/**
+ * capi20_set_callback() - set CAPI application notification callback function
+ * @ap: CAPI application descriptor structure.
+ * @callback: callback function (NULL to remove).
+ *
+ * If not NULL, the callback function will be called to notify the
+ * application of the addition or removal of a controller.
+ * The first argument (cmd) will tell whether the controller was added
+ * (KCI_CONTRUP) or removed (KCI_CONTRDOWN).
+ * The second argument (contr) will be the controller number.
+ * For cmd==KCI_CONTRUP the third argument (data) will be a pointer to the
+ * new controller's capability profile structure.
+ */
+
void capi20_set_callback(struct capi20_appl *ap,
void (*callback) (unsigned int cmd, __u32 contr, void *data))
{
config PMAC_MEDIABAY
bool "Support PowerBook hotswap media bay"
- depends on PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32 && BLOCK
help
This option adds support for older PowerBook's hotswap media bay
that can contains batteries, floppy drives, or IDE devices. PCI
#include <linux/timer.h>
#include <linux/stddef.h>
#include <linux/init.h>
-#include <linux/ide.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/prom.h>
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
int irq, ide_hwif_t *hwif)
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
/* the bio has been remapped so dispatch it */
trace_block_remap(bdev_get_queue(clone->bi_bdev), clone,
- tio->io->bio->bi_bdev->bd_dev,
- clone->bi_sector, sector);
+ tio->io->bio->bi_bdev->bd_dev, sector);
generic_make_request(clone);
} else if (r < 0 || r == DM_MAPIO_REQUEUE) {
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
- goto unlock;
+ goto done;
}
/* stop rds reception */
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
- usb_set_intfdata(interface, dev);
-
/* Create the v4l2_device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
/* Digital TV */
au0828_dvb_register(dev);
+ /* Store the pointer to the au0828_dev so it can be accessed in
+ au0828_usb_disconnect */
+ usb_set_intfdata(interface, dev);
+
printk(KERN_INFO "Registered device AU0828 [%s]\n",
dev->board.name == NULL ? "Unset" : dev->board.name);
/* handle muxer chips */
v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
- in->audio_input, 0, 0);
+ (u32) in->muxer_input, 0, 0);
err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
audio, s_routing, in->audio_input, 0, 0);
/* init + register i2c algo-bit adapter */
int init_cx18_i2c(struct cx18 *cx)
{
- int i;
+ int i, err;
CX18_DEBUG_I2C("i2c init\n");
for (i = 0; i < 2; i++) {
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
- return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
- i2c_bit_add_bus(&cx->i2c_adap[1]);
+ err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+ if (err)
+ goto err;
+ err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+ if (err)
+ goto err_del_bus_0;
+ return 0;
+
+ err_del_bus_0:
+ i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+ return err;
}
void exit_cx18_i2c(struct cx18 *cx)
config VIDEO_CX231XX
- tristate "Conexant cx231xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
- select VIDEO_IR
- select VIDEOBUF_VMALLOC
- select VIDEO_CX25840
- select VIDEO_CX231XX_ALSA
+ tristate "Conexant cx231xx USB video capture support"
+ depends on VIDEO_DEV && I2C && INPUT
+ select VIDEO_TUNER
+ select VIDEO_TVEEPROM
+ select VIDEO_IR
+ select VIDEOBUF_VMALLOC
+ select VIDEO_CX25840
---help---
This is a video4linux driver for Conexant 231xx USB based TV cards.
module will be called cx231xx
config VIDEO_CX231XX_ALSA
- tristate "Conexant Cx231xx ALSA audio module"
- depends on VIDEO_CX231XX && SND
- select SND_PCM
+ tristate "Conexant Cx231xx ALSA audio module"
+ depends on VIDEO_CX231XX && SND
+ select SND_PCM
- ---help---
- This is an ALSA driver for Cx231xx USB based TV cards.
+ ---help---
+ This is an ALSA driver for Cx231xx USB based TV cards.
- To compile this driver as a module, choose M here: the
- module will be called cx231xx-alsa
+ To compile this driver as a module, choose M here: the
+ module will be called cx231xx-alsa
config VIDEO_CX231XX_DVB
- tristate "DVB/ATSC Support for Cx231xx based TV cards"
- depends on VIDEO_CX231XX && DVB_CORE
- select VIDEOBUF_DVB
- select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
- ---help---
- This adds support for DVB cards based on the
- Conexant cx231xx chips.
+ tristate "DVB/ATSC Support for Cx231xx based TV cards"
+ depends on VIDEO_CX231XX && DVB_CORE
+ select VIDEOBUF_DVB
+ select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+
+ ---help---
+ This adds support for DVB cards based on the
+ Conexant cx231xx chips.
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
- if (port->nr == 0)
+ if (port->nr == 1)
bitmask = 0x01;
- else if (port->nr == 1)
+ else if (port->nr == 2)
bitmask = 0x04;
break;
}
.demod_address = 0x0f,
.if2 = 45600,
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct stv0900_config netup_stv0900_config = {
.owner = THIS_MODULE,
.add = mx3_camera_add_device,
.remove = mx3_camera_remove_device,
-#ifdef CONFIG_PM
- .suspend = mx3_camera_suspend,
- .resume = mx3_camera_resume,
-#endif
.set_crop = mx3_camera_set_crop,
.set_fmt = mx3_camera_set_fmt,
.try_fmt = mx3_camera_try_fmt,
/****************************************************************************/
+static int _send_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, int index, void *buf, int buflen, int timeout)
+{
+ int rc;
+ void *kbuf = NULL;
+
+ if (buflen) {
+ kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+ if (kbuf == NULL)
+ return -ENOMEM;
+ memcpy(kbuf, buf, buflen);
+ }
-#define SendControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, 500)
+ rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+ request,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ kbuf, buflen, timeout);
-#define RecvControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, 500)
+ kfree(kbuf);
+ return rc;
+}
+static int recv_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, void *buf, int buflen)
+{
+ int rc;
+ void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+
+ if (kbuf == NULL)
+ return -ENOMEM;
+
+ rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+ request,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ pdev->vcinterface,
+ kbuf, buflen, 500);
+ memcpy(buf, kbuf, buflen);
+ kfree(kbuf);
+ return rc;
+}
-static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
+static inline int send_video_command(struct pwc_device *pdev,
+ int index, void *buf, int buflen)
{
- return usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
+ return _send_control_msg(pdev,
SET_EP_STREAM_CTL,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
VIDEO_OUTPUT_CONTROL_FORMATTER,
index,
buf, buflen, 1000);
}
+static inline int send_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, void *buf, int buflen)
+{
+ return _send_control_msg(pdev,
+ request, value, pdev->vcinterface, buf, buflen, 500);
+}
+
static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
return -EINVAL;
memcpy(buf, pEntry->mode, 3);
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
+ ret = send_video_command(pdev, pdev->vendpoint, buf, 3);
if (ret < 0) {
PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
return ret;
memcpy(buf, pChoose->mode, 13);
if (snapshot)
buf[0] |= 0x80;
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
+ ret = send_video_command(pdev, pdev->vendpoint, buf, 13);
if (ret < 0)
return ret;
buf[0] |= 0x80;
/* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
- ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
+ ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12);
if (ret < 0)
return ret;
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 9) & 0x7f;
- return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
}
/* CONTRAST */
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3f;
- return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
}
/* GAMMA */
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 11) & 0x1f;
- return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
}
saturation_register = SATURATION_MODE_FORMATTER2;
else
saturation_register = SATURATION_MODE_FORMATTER1;
- ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = (signed)buf;
saturation_register = SATURATION_MODE_FORMATTER2;
else
saturation_register = SATURATION_MODE_FORMATTER1;
- return SendControlMsg(SET_CHROM_CTL, saturation_register, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
}
/* AGC */
else
buf = 0xff; /* fixed */
- ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
if (!mode && ret >= 0) {
if (value < 0)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3F;
- ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
}
if (ret < 0)
return ret;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf != 0) { /* fixed */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf > 0x3F)
*value = (buf << 10);
}
else { /* auto */
- ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
/* Gah... this value ranges from 0x00 ... 0x9F */
else
buf[0] = 0xff; /* fixed */
- ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
if (!mode && ret >= 0) {
if (value < 0)
buf[0] = value >> 8;
}
- ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
+ &buf, sizeof(buf));
}
return ret;
}
unsigned char buf[2];
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf[0] + (buf[1] << 8);
buf = 0x00; /* active */
else
buf = 0xFF; /* power save */
- return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_restore_user(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
}
int pwc_save_user(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
}
int pwc_restore_factory(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
}
/* ************************************************* */
buf = mode & 0x07; /* just the lowest three bits */
- ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
value = 0xffff;
/* only the msb is considered */
buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_red_gain(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
value = 0xffff;
/* only the msb is considered */
buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
/* useful range is 0x01..0x20 */
buf = speed / 0x7f0;
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf * 0x7f0;
/* useful range is 0x01..0x3F */
buf = (delay >> 10);
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 10;
buf[0] = on_value;
buf[1] = off_value;
- return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
return 0;
}
- ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*on_value = buf[0] * 100;
buf = 0xff; /* auto contour on */
else
buf = 0x0; /* auto contour off */
- ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
contour = 0xffff;
buf = (contour >> 10); /* contour preset is [0..3f] */
- ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return 0;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf == 0) {
/* auto mode off, query current preset value */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*contour = buf << 10;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*backlight = !!buf;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
}
int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*colour = !!buf;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
}
int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*flicker = !!buf;
if (noise > 3)
noise = 3;
buf = noise;
- return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*noise = buf;
unsigned char buf;
buf = flags & 0x03; // only lower two bits are currently used
- return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf));
}
int pwc_mpt_reset(struct pwc_device *pdev, int flags)
buf[1] = (pan >> 8) & 0xFF;
buf[2] = tilt & 0xFF;
buf[3] = (tilt >> 8) & 0xFF;
- return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
+ return send_control_msg(pdev,
+ SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf));
}
int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
int ret;
unsigned char buf[5];
- ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
+ ret = recv_control_msg(pdev,
+ GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
status->status = buf[0] & 0x7; // 3 bits are used for reporting
else
request = SENSOR_TYPE_FORMATTER2;
- ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, request, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (pdev->type < 675)
buffer[1] = (u32) chn_rev;
buffer[2] = CMD_SET_MODE;
memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
+ dev->setmode_ready[chn] = 0;
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
if (debug)
dump_verify_mode(dev, mode);
/* wait at least 3 frames before continuing */
if (mode->restart) {
- dev->setmode_ready[chn] = 0;
wait_event_timeout(dev->wait_setmode[chn],
(dev->setmode_ready[chn] != 0),
msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
/* Now create a video4linux device */
t->vdev = video_device_alloc();
if (t->vdev == NULL) {
+ kfree(t);
kfree(client);
return -ENOMEM;
}
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
brq.data.blocks = req->nr_sectors;
+ /*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
+
/*
* After a read error, we redo the request one sector at a time
* in order to accurately determine which sectors can be read
* This delay should be sufficient to allow the power supply
* to reach the minimum voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
* This delay must be at least 74 clock sizes, or 1 ms, or the
* time required to reach a stable voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
}
static void mmc_power_off(struct mmc_host *host)
}
host = mmc_priv(mmc);
+ host->mmc = mmc;
/* Bits 12 thru 19 is the designer */
host->hw_designer = (dev->periphid >> 12) & 0xff;
/* Bits 20 thru 23 is the revison */
host->mclk = clk_get_rate(host->clk);
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
}
- host->mmc = mmc;
host->base = ioremap(dev->res.start, SZ_4K);
if (!host->base) {
ret = -ENOMEM;
}
#ifdef CONFIG_PM
-static int mvsd_suspend(struct platform_device *dev, pm_message_t state,
- u32 level)
+static int mvsd_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
+ if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
-static int mvsd_resume(struct platform_device *dev, u32 level)
+static int mvsd_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = platform_dev_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == RESUME_ENABLE)
+ if (mmc)
ret = mmc_resume_host(mmc);
return ret;
struct timer_list dma_timer;
unsigned dma_len;
- short power_pin;
-
struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS];
struct mmc_omap_slot *current_slot;
spinlock_t slot_lock;
host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
if (IS_ERR(host)) {
- ret = PTR_ERR(host);
- goto unmap;
+ dev_err(&pdev->dev, "cannot allocate host\n");
+ return ERR_PTR(PTR_ERR(host));
}
slot = sdhci_priv(host);
ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
if (ret) {
dev_err(&pdev->dev, "cannot request region\n");
- return ERR_PTR(ret);
+ goto free;
}
addr = pci_resource_start(pdev, bar);
release:
pci_release_region(pdev, bar);
+
+free:
sdhci_free_host(host);
return ERR_PTR(ret);
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
- SDHCI_INT_DATA_END_BIT)
+ SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
cafe->ctl1 &= ~CTRL1_CHIPSELECT;
}
-static int cafe_nand_interrupt(int irq, void *id)
+static irqreturn_t cafe_nand_interrupt(int irq, void *id)
{
struct mtd_info *mtd = id;
struct cafe_priv *cafe = mtd->priv;
RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
/* Must enable Tx/Rx before setting transfer thresholds! */
RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
RTL_W32 (RxConfig, tp->rx_config);
RTL_W32 (TxConfig, rtl8139_tx_config);
- tp->cur_rx = 0;
-
rtl_check_media (dev, 1);
if (tp->chipset >= CH_8139B) {
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
- /* init Rx ring buffer DMA address */
- RTL_W32_F (RxBuf, tp->rx_ring_dma);
-
/* init Tx buffer DMA addresses */
for (i = 0; i < NUM_TX_DESC; i++)
RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
config COMPAT_NET_DEV_OPS
default y
- bool "Enable older network device API compatiablity"
+ bool "Enable older network device API compatibility"
---help---
- This option enables kernel compatiability with older network devices
+ This option enables kernel compatibility with older network devices
that do not use net_device_ops interface.
If unsure, say Y.
* Called with RTNL
*/
int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
- __releases(&bond->curr_slave_lock)
- __releases(&bond->lock)
__acquires(&bond->lock)
- __acquires(&bond->curr_slave_lock)
+ __releases(&bond->lock)
{
struct bonding *bond = netdev_priv(bond_dev);
struct sockaddr *sa = addr;
}
}
- write_unlock_bh(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
-
if (swap_slave) {
alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
bond->alb_info.rlb_enabled);
+ read_lock(&bond->lock);
alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);
if (bond->alb_info.rlb_enabled) {
/* inform clients mac address has changed */
rlb_req_update_slave_clients(bond, bond->curr_active_slave);
}
+ read_unlock(&bond->lock);
}
- read_lock(&bond->lock);
- write_lock_bh(&bond->curr_slave_lock);
-
return 0;
}
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
- int i, found = 0;
-
- if (info->slave_id < 0) {
- return -ENODEV;
- }
+ int i, res = -ENODEV;
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i) {
if (i == (int)info->slave_id) {
- found = 1;
+ res = 0;
+ strcpy(info->slave_name, slave->dev->name);
+ info->link = slave->link;
+ info->state = slave->state;
+ info->link_failure_count = slave->link_failure_count;
break;
}
}
read_unlock(&bond->lock);
- if (found) {
- strcpy(info->slave_name, slave->dev->name);
- info->link = slave->link;
- info->state = slave->state;
- info->link_failure_count = slave->link_failure_count;
- } else {
- return -ENODEV;
- }
-
- return 0;
+ return res;
}
/*-------------------------------- Monitoring -------------------------------*/
up_write(&bonding_rwsem);
rtnl_unlock(); /* allows sysfs registration of net device */
res = bond_create_sysfs_entry(netdev_priv(bond_dev));
- if (res < 0) {
- rtnl_lock();
- down_write(&bonding_rwsem);
- bond_deinit(bond_dev);
- unregister_netdevice(bond_dev);
- goto out_rtnl;
- }
+ if (res < 0)
+ goto out_unreg;
return 0;
+out_unreg:
+ rtnl_lock();
+ down_write(&bonding_rwsem);
+ unregister_netdevice(bond_dev);
out_bond:
bond_deinit(bond_dev);
out_netdev:
spin_unlock_irq(&adapter->work_lock);
free_irq_resources(adapter);
- flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
quiesce_rx(adapter);
+ flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
}
static void schedule_chk_task(struct adapter *adap)
sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group);
+ /* Flush work scheduled while releasing TIDs */
+ flush_scheduled_work();
+
tdev->lldev = NULL;
cxgb3_set_dummy_ops(tdev);
t3_tp_set_offload_mode(adapter, 0);
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
+
+ if (!adapter->open_device_map)
+ return 0;
+
/* Stop link fault interrupts */
t3_xgm_intr_disable(adapter, pi->port_id);
t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
spin_unlock_irq(&adapter->work_lock);
if (!(adapter->open_device_map & PORT_MASK))
- cancel_rearming_delayed_workqueue(cxgb3_wq,
- &adapter->adap_check_task);
+ cancel_delayed_work_sync(&adapter->adap_check_task);
if (!adapter->open_device_map)
cxgb_down(adapter);
spin_lock_irq(&adapter->work_lock);
if (p->link_fault) {
+ t3_link_fault(adapter, i);
spin_unlock_irq(&adapter->work_lock);
continue;
}
adapter->check_task_cnt++;
- /* Check link status for PHYs without interrupts */
- if (p->linkpoll_period)
- check_link_status(adapter);
+ check_link_status(adapter);
/* Accumulate MAC stats if needed */
if (!p->linkpoll_period ||
spin_unlock(&adapter->work_lock);
}
-static void link_fault_task(struct work_struct *work)
-{
- struct adapter *adapter = container_of(work, struct adapter,
- link_fault_handler_task);
- int i;
-
- for_each_port(adapter, i) {
- struct net_device *netdev = adapter->port[i];
- struct port_info *pi = netdev_priv(netdev);
-
- if (pi->link_fault)
- t3_link_fault(adapter, i);
- }
-}
-
void t3_os_link_fault_handler(struct adapter *adapter, int port_id)
{
struct net_device *netdev = adapter->port[port_id];
spin_lock(&adapter->work_lock);
pi->link_fault = 1;
- queue_work(cxgb3_wq, &adapter->link_fault_handler_task);
spin_unlock(&adapter->work_lock);
}
struct adapter *adapter = pci_get_drvdata(pdev);
int ret;
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
ret = t3_adapter_error(adapter, 0);
/* Request a slot reset. */
while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
vectors = err;
- if (!err && vectors < (adap->params.nports + 1))
+ if (err < 0)
+ pci_disable_msix(adap->pdev);
+
+ if (!err && vectors < (adap->params.nports + 1)) {
+ pci_disable_msix(adap->pdev);
err = -1;
+ }
if (!err) {
for (i = 0; i < vectors; ++i)
INIT_LIST_HEAD(&adapter->adapter_list);
INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task);
- INIT_WORK(&adapter->link_fault_handler_task, link_fault_task);
INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task);
INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
struct cphy *phy = &pi->phy;
struct cmac *mac = &pi->mac;
struct link_config *lc = &pi->link_config;
- int force_link_down = 0;
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
status = t3_read_reg(adapter, A_XGM_INT_STATUS + mac->offset);
if (status & F_LINKFAULTCHANGE) {
mac->stats.link_faults++;
- force_link_down = 1;
+ pi->link_fault = 1;
}
t3_open_rx_traffic(mac, rx_cfg, rx_hash_high, rx_hash_low);
-
- if (force_link_down) {
- t3_os_link_fault_handler(adapter, port_id);
- return;
- }
}
if (lc->requested_fc & PAUSE_AUTONEG)
/* Account link faults only when the phy reports a link up */
if (link_ok)
mac->stats.link_faults++;
-
- msleep(1000);
- t3_os_link_fault_handler(adapter, port_id);
} else {
if (link_ok)
t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset,
adapter->params.info = ai;
adapter->params.nports = ai->nports0 + ai->nports1;
- adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1);
+ adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1);
adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
/*
* We used to only run the "adapter check task" once a second if
#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
-static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
E100_82552_SMARTSPEED, smartspeed |
E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
}
- if (pci_enable_wake(pdev, PCI_D3cold, true))
- pci_enable_wake(pdev, PCI_D3hot, true);
+ *enable_wake = true;
} else {
- pci_enable_wake(pdev, PCI_D3hot, false);
+ *enable_wake = false;
}
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+}
- return 0;
+static int __e100_power_off(struct pci_dev *pdev, bool wake)
+{
+ if (wake) {
+ return pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ return pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#ifdef CONFIG_PM
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ return __e100_power_off(pdev, wake);
+}
+
static int e100_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
static void e100_shutdown(struct pci_dev *pdev)
{
- e100_suspend(pdev, PMSG_SUSPEND);
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ if (system_state == SYSTEM_POWER_OFF)
+ __e100_power_off(pdev, wake);
}
/* ------------------ PCI Error Recovery infrastructure -------------- */
struct e1000_hw *hw = &adapter->hw;
u32 rctl, icr = er32(ICR);
- if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
return IRQ_NONE; /* Not our interrupt */
/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
struct e1000_buffer *buffer_info;
unsigned int i, eop;
unsigned int count = 0;
- bool cleaned = false;
unsigned int total_tx_bytes=0, total_tx_packets=0;
i = tx_ring->next_to_clean;
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
(count < tx_ring->count)) {
- for (cleaned = false; !cleaned; count++) {
+ bool cleaned = false;
+ for ( ; !cleaned; count++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
tx_ring->next_to_clean = i;
#define TX_WAKE_THRESHOLD 32
- if (unlikely(cleaned && netif_carrier_ok(netdev) &&
+ if (unlikely(count && netif_carrier_ok(netdev) &&
E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
/* Make sure that anybody stopping the queue after this
* sees the new next_to_clean.
struct e1000_buffer *buffer_info;
unsigned int i, eop;
unsigned int count = 0;
- bool cleaned = false;
unsigned int total_tx_bytes = 0, total_tx_packets = 0;
i = tx_ring->next_to_clean;
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
(count < tx_ring->count)) {
- for (cleaned = 0; !cleaned; count++) {
+ bool cleaned = false;
+ for (; !cleaned; count++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
tx_ring->next_to_clean = i;
#define TX_WAKE_THRESHOLD 32
- if (cleaned && netif_carrier_ok(netdev) &&
- e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
+ if (count && netif_carrier_ok(netdev) &&
+ e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
/* Make sure that anybody stopping the queue after this
* sees the new next_to_clean.
*/
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0100"
+#define DRV_VERSION "EHEA_0101"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
x &= (arr_len - 1);
pref = skb_array[x];
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
-
- pref = (skb_array[x]->data);
- prefetch(pref);
- prefetch(pref + EHEA_CACHE_LINE);
- prefetch(pref + EHEA_CACHE_LINE * 2);
- prefetch(pref + EHEA_CACHE_LINE * 3);
+ if (pref) {
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
+
+ pref = (skb_array[x]->data);
+ prefetch(pref);
+ prefetch(pref + EHEA_CACHE_LINE);
+ prefetch(pref + EHEA_CACHE_LINE * 2);
+ prefetch(pref + EHEA_CACHE_LINE * 3);
+ }
+
skb = skb_array[skb_index];
skb_array[skb_index] = NULL;
return skb;
x &= (arr_len - 1);
pref = skb_array[x];
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
+ if (pref) {
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
- pref = (skb_array[x]->data);
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
+ pref = (skb_array[x]->data);
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
+ }
skb = skb_array[wqe_index];
skb_array[wqe_index] = NULL;
np->tx_pkts_in_progress = 0;
np->tx_change_owner = NULL;
np->tx_end_flip = NULL;
+ np->tx_stop = 0;
for (i = 0; i < np->tx_ring_size; i++) {
if (!nv_optimized(np)) {
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 status;
+ union ring_type put_tx;
+ int saved_tx_limit;
if (np->msi_flags & NV_MSI_X_ENABLED)
status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
/* 1) stop tx engine */
nv_stop_tx(dev);
- /* 2) check that the packets were not sent already: */
+ /* 2) complete any outstanding tx and do not give HW any limited tx pkts */
+ saved_tx_limit = np->tx_limit;
+ np->tx_limit = 0; /* prevent giving HW any limited pkts */
+ np->tx_stop = 0; /* prevent waking tx queue */
if (!nv_optimized(np))
nv_tx_done(dev, np->tx_ring_size);
else
nv_tx_done_optimized(dev, np->tx_ring_size);
- /* 3) if there are dead entries: clear everything */
- if (np->get_tx_ctx != np->put_tx_ctx) {
- printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
- nv_drain_tx(dev);
- nv_init_tx(dev);
- setup_hw_rings(dev, NV_SETUP_TX_RING);
- }
+ /* save current HW postion */
+ if (np->tx_change_owner)
+ put_tx.ex = np->tx_change_owner->first_tx_desc;
+ else
+ put_tx = np->put_tx;
- netif_wake_queue(dev);
+ /* 3) clear all tx state */
+ nv_drain_tx(dev);
+ nv_init_tx(dev);
+
+ /* 4) restore state to current HW position */
+ np->get_tx = np->put_tx = put_tx;
+ np->tx_limit = saved_tx_limit;
- /* 4) restart tx engine */
+ /* 5) restart tx engine */
nv_start_tx(dev);
+ netif_wake_queue(dev);
spin_unlock_irq(&np->lock);
}
static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
/**
* Clear accounting of old secondary address list,
* don't count RAR[0]
*/
- uc_addr_in_use = hw->addr_ctrl.rar_used_count -
- hw->addr_ctrl.mc_addr_in_rar_count - 1;
+ uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
hw->addr_ctrl.overflow_promisc = 0;
IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
}
-/**
- * ixgbe_add_mc_addr - Adds a multicast address.
- * @hw: pointer to hardware structure
- * @mc_addr: new multicast address
- *
- * Adds it to unused receive address register or to the multicast table.
- **/
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
-{
- u32 rar_entries = hw->mac.num_rar_entries;
- u32 rar;
-
- hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
- mc_addr[0], mc_addr[1], mc_addr[2],
- mc_addr[3], mc_addr[4], mc_addr[5]);
-
- /*
- * Place this multicast address in the RAR if there is room,
- * else put it in the MTA
- */
- if (hw->addr_ctrl.rar_used_count < rar_entries) {
- /* use RAR from the end up for multicast */
- rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
- hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
- hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
- hw->addr_ctrl.rar_used_count++;
- hw->addr_ctrl.mc_addr_in_rar_count++;
- } else {
- ixgbe_set_mta(hw, mc_addr);
- }
-
- hw_dbg(hw, "ixgbe_add_mc_addr Complete\n");
-}
-
/**
* ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
* @hw: pointer to hardware structure
u32 mc_addr_count, ixgbe_mc_addr_itr next)
{
u32 i;
- u32 rar_entries = hw->mac.num_rar_entries;
u32 vmdq;
/*
* use.
*/
hw->addr_ctrl.num_mc_addrs = mc_addr_count;
- hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count;
- hw->addr_ctrl.mc_addr_in_rar_count = 0;
hw->addr_ctrl.mta_in_use = 0;
- /* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
- rar_entries - 1);
- for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
- }
-
/* Clear the MTA */
hw_dbg(hw, " Clearing MTA\n");
for (i = 0; i < hw->mac.mcft_size; i++)
/* Add the new addresses */
for (i = 0; i < mc_addr_count; i++) {
hw_dbg(hw, " Adding the multicast addresses:\n");
- ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq));
+ ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
}
/* Enable mta */
s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw,
struct ixgbe_dcb_config *dcb_config)
{
- u32 i, reg;
+ u32 i, reg, rx_pba_size;
/* If PFC is disabled globally then fall back to LFC. */
if (!dcb_config->pfc_mode_enable) {
/* Configure PFC Tx thresholds per TC */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- /* Config and remember Tx */
+ if (dcb_config->rx_pba_cfg == pba_equal)
+ rx_pba_size = IXGBE_RXPBSIZE_64KB;
+ else
+ rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB
+ : IXGBE_RXPBSIZE_48KB;
+
+ reg = ((rx_pba_size >> 5) & 0xFFE0);
if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
- dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) {
- reg = hw->fc.high_water | IXGBE_FCRTH_FCEN;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
- reg = hw->fc.low_water | IXGBE_FCRTL_XONE;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
- }
+ dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
+ reg |= IXGBE_FCRTL_XONE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
+
+ reg = ((rx_pba_size >> 2) & 0xFFE0);
+ if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
+ dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
+ reg |= IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
}
/* Configure pause time (2 TCs per register) */
}
ret = true;
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
- for (i = 0; i < dcb_i; i++) {
- adapter->rx_ring[i].reg_idx = i << 4;
- adapter->tx_ring[i].reg_idx = i << 4;
+ if (dcb_i == 8) {
+ /*
+ * Tx TC0 starts at: descriptor queue 0
+ * Tx TC1 starts at: descriptor queue 32
+ * Tx TC2 starts at: descriptor queue 64
+ * Tx TC3 starts at: descriptor queue 80
+ * Tx TC4 starts at: descriptor queue 96
+ * Tx TC5 starts at: descriptor queue 104
+ * Tx TC6 starts at: descriptor queue 112
+ * Tx TC7 starts at: descriptor queue 120
+ *
+ * Rx TC0-TC7 are offset by 16 queues each
+ */
+ for (i = 0; i < 3; i++) {
+ adapter->tx_ring[i].reg_idx = i << 5;
+ adapter->rx_ring[i].reg_idx = i << 4;
+ }
+ for ( ; i < 5; i++) {
+ adapter->tx_ring[i].reg_idx =
+ ((i + 2) << 4);
+ adapter->rx_ring[i].reg_idx = i << 4;
+ }
+ for ( ; i < dcb_i; i++) {
+ adapter->tx_ring[i].reg_idx =
+ ((i + 8) << 3);
+ adapter->rx_ring[i].reg_idx = i << 4;
+ }
+
+ ret = true;
+ } else if (dcb_i == 4) {
+ /*
+ * Tx TC0 starts at: descriptor queue 0
+ * Tx TC1 starts at: descriptor queue 64
+ * Tx TC2 starts at: descriptor queue 96
+ * Tx TC3 starts at: descriptor queue 112
+ *
+ * Rx TC0-TC3 are offset by 32 queues each
+ */
+ adapter->tx_ring[0].reg_idx = 0;
+ adapter->tx_ring[1].reg_idx = 64;
+ adapter->tx_ring[2].reg_idx = 96;
+ adapter->tx_ring[3].reg_idx = 112;
+ for (i = 0 ; i < dcb_i; i++)
+ adapter->rx_ring[i].reg_idx = i << 5;
+
+ ret = true;
+ } else {
+ ret = false;
}
- ret = true;
} else {
ret = false;
}
ixgbe_reset(adapter);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
if (netif_running(netdev)) {
err = ixgbe_open(adapter->netdev);
if (err)
}
hw->mac.ops.setup_sfp(hw);
- if (!adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)
+ if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
/* This will also work for DA Twinax connections */
schedule_work(&adapter->multispeed_fiber_task);
adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK;
const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
static int cards_found;
int i, err, pci_using_dac;
- u16 pm_value = 0;
u32 part_num, eec;
err = pci_enable_device(pdev);
switch (pdev->device) {
case IXGBE_DEV_ID_82599_KX4:
-#define IXGBE_PCIE_PMCSR 0x44
- adapter->wol = IXGBE_WUFC_MAG;
- pci_read_config_word(pdev, IXGBE_PCIE_PMCSR, &pm_value);
- pci_write_config_word(pdev, IXGBE_PCIE_PMCSR,
- (pm_value | (1 << 8)));
+ adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
+ IXGBE_WUFC_MC | IXGBE_WUFC_BC);
break;
default:
adapter->wol = 0;
dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
(unsigned long)status);
- if (status & MACB_BIT(UND)) {
+ if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
int i;
- printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
- bp->dev->name);
+ printk(KERN_ERR "%s: TX %s, resetting buffers\n",
+ bp->dev->name, status & MACB_BIT(UND) ?
+ "underrun" : "retry limit exceeded");
/* Transfer ongoing, disable transmitter, to avoid confusion */
if (status & MACB_BIT(TGO))
macb_writel(bp, RSR, status);
work_done = 0;
- if (!status) {
- /*
- * This may happen if an interrupt was pending before
- * this function was called last time, and no packets
- * have been received since.
- */
- napi_complete(napi);
- goto out;
- }
dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
(unsigned long)status, budget);
- if (!(status & MACB_BIT(REC))) {
- dev_warn(&bp->pdev->dev,
- "No RX buffers complete, status = %02lx\n",
- (unsigned long)status);
- napi_complete(napi);
- goto out;
- }
-
work_done = macb_rx(bp, budget);
if (work_done < budget)
napi_complete(napi);
* We've done what we can to clean the buffers. Make sure we
* get notified when new packets arrive.
*/
-out:
macb_writel(bp, IER, MACB_RX_INT_FLAGS);
/* TODO: Handle errors */
}
}
- if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND)))
+ if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) |
+ MACB_BIT(ISR_RLE)))
macb_tx(bp);
/*
const struct macvlan_dev *vlan = netdev_priv(dev);
struct net_device *lowerdev = vlan->lowerdev;
- if (lowerdev->ethtool_ops->get_rx_csum == NULL)
+ if (lowerdev->ethtool_ops == NULL ||
+ lowerdev->ethtool_ops->get_rx_csum == NULL)
return 0;
return lowerdev->ethtool_ops->get_rx_csum(lowerdev);
}
const struct macvlan_dev *vlan = netdev_priv(dev);
struct net_device *lowerdev = vlan->lowerdev;
- if (!lowerdev->ethtool_ops->get_settings)
+ if (!lowerdev->ethtool_ops ||
+ !lowerdev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
return lowerdev->ethtool_ops->get_settings(lowerdev, cmd);
const struct macvlan_dev *vlan = netdev_priv(dev);
struct net_device *lowerdev = vlan->lowerdev;
- if (!lowerdev->ethtool_ops->get_flags)
+ if (!lowerdev->ethtool_ops ||
+ !lowerdev->ethtool_ops->get_flags)
return 0;
return lowerdev->ethtool_ops->get_flags(lowerdev);
}
mdev->workqueue = create_singlethread_workqueue("mlx4_en");
if (!mdev->workqueue) {
err = -ENOMEM;
- goto err_close_nic;
+ goto err_mr;
}
/* At this stage all non-port specific tasks are complete:
flush_workqueue(mdev->workqueue);
/* Stop event queue before we drop down to release shared SW state */
-
-err_close_nic:
destroy_workqueue(mdev->workqueue);
+
err_mr:
mlx4_mr_free(dev, &mdev->mr);
err_uar:
if (netif_msg_timer(priv))
mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port);
- if (netif_carrier_ok(dev)) {
- priv->port_stats.tx_timeout++;
- mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
- queue_work(mdev->workqueue, &priv->watchdog_task);
- }
+ priv->port_stats.tx_timeout++;
+ mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
+ queue_work(mdev->workqueue, &priv->watchdog_task);
}
err = mlx4_en_activate_cq(priv, cq);
if (err) {
mlx4_err(mdev, "Failed activating Rx CQ\n");
- goto rx_err;
+ goto cq_err;
}
for (j = 0; j < cq->size; j++)
cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK;
struct net_device *dev = priv->dev;
mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
- mlx4_en_stop_port(dev);
- if (mlx4_en_start_port(dev))
- mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+
+ mutex_lock(&mdev->state_lock);
+ if (priv->port_up) {
+ mlx4_en_stop_port(dev);
+ if (mlx4_en_start_port(dev))
+ mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+ }
+ mutex_unlock(&mdev->state_lock);
}
* Set driver features
*/
dev->features |= NETIF_F_SG;
- dev->features |= NETIF_F_HW_CSUM;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
dev->features |= NETIF_F_HIGHDMA;
dev->features |= NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
struct mlx4_cmd_mailbox *mailbox;
u64 in_mod = reset << 8 | port;
int err;
+ int i;
mailbox = mlx4_alloc_cmd_mailbox(mdev->dev);
if (IS_ERR(mailbox))
spin_lock_bh(&priv->stats_lock);
- stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) -
- be32_to_cpu(mlx4_en_stats->RDROP);
- stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_1) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_2) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_3) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_4) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_5) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_6) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_7) +
- be64_to_cpu(mlx4_en_stats->TTOT_novlan) +
- be64_to_cpu(mlx4_en_stats->TTOT_loopbk);
- stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_1) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_2) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_3) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_4) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_5) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_6) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_7) +
- be64_to_cpu(mlx4_en_stats->ROCT_novlan);
-
- stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk);
+ stats->rx_packets = 0;
+ stats->rx_bytes = 0;
+ for (i = 0; i < priv->rx_ring_num; i++) {
+ stats->rx_packets += priv->rx_ring[i].packets;
+ stats->rx_bytes += priv->rx_ring[i].bytes;
+ }
+ stats->tx_packets = 0;
+ stats->tx_bytes = 0;
+ for (i = 0; i <= priv->tx_ring_num; i++) {
+ stats->tx_packets += priv->tx_ring[i].packets;
+ stats->tx_bytes += priv->tx_ring[i].bytes;
+ }
stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) +
be32_to_cpu(mlx4_en_stats->RdropLength) +
vunmap(buf->direct.buf);
}
+
+void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
+{
+ return;
+}
+
/* Initialize page allocators */
err = mlx4_en_init_allocator(priv, ring);
if (err) {
- mlx4_err(mdev, "Failed initializing ring allocator\n");
- goto err_allocator;
+ mlx4_err(mdev, "Failed initializing ring allocator\n");
+ ring_ind--;
+ goto err_allocator;
}
/* Fill Rx buffers */
ring->wqres.db.dma, &ring->srq);
if (err){
mlx4_err(mdev, "Failed to allocate srq\n");
+ ring_ind--;
goto err_srq;
}
ring->srq.event = mlx4_en_srq_event;
used_frags = mlx4_en_complete_rx_desc(priv, rx_desc, skb_frags,
skb_shinfo(skb)->frags,
page_alloc, length);
+ if (unlikely(!used_frags)) {
+ kfree_skb(skb);
+ return NULL;
+ }
skb_shinfo(skb)->nr_frags = used_frags;
/* Copy headers into the skb linear buffer */
}
}
-static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
-{
- return;
-}
-
-
static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
int qpn, int srqn, int cqn,
enum mlx4_qp_state *state,
mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn);
goto err_reserve;
}
+ ring->qp.event = mlx4_en_sqp_event;
return 0;
nreq = err;
goto retry;
}
-
+ kfree(entries);
goto no_msi;
}
void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
int is_tx, int rss, int qpn, int cqn, int srqn,
struct mlx4_qp_context *context);
+void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event);
int mlx4_en_map_buffer(struct mlx4_buf *buf);
void mlx4_en_unmap_buffer(struct mlx4_buf *buf);
struct work_struct tx_timeout_task;
struct napi_struct napi;
+ u8 oom;
u8 work_link;
u8 work_tx;
u8 work_tx_end;
u8 work_rx;
u8 work_rx_refill;
- u8 work_rx_oom;
int skb_size;
struct sk_buff_head rx_recycle;
dma_get_cache_alignment() - 1);
if (skb == NULL) {
- mp->work_rx_oom |= 1 << rxq->index;
+ mp->oom = 1;
goto oom;
}
spin_lock_bh(&mp->mib_counters_lock);
p->good_octets_received += mib_read(mp, 0x00);
- p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
p->bad_octets_received += mib_read(mp, 0x08);
p->internal_mac_transmit_err += mib_read(mp, 0x0c);
p->good_frames_received += mib_read(mp, 0x10);
p->frames_512_to_1023_octets += mib_read(mp, 0x30);
p->frames_1024_to_max_octets += mib_read(mp, 0x34);
p->good_octets_sent += mib_read(mp, 0x38);
- p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32;
p->good_frames_sent += mib_read(mp, 0x40);
p->excessive_collision += mib_read(mp, 0x44);
p->multicast_frames_sent += mib_read(mp, 0x48);
mp = container_of(napi, struct mv643xx_eth_private, napi);
- mp->work_rx_refill |= mp->work_rx_oom;
- mp->work_rx_oom = 0;
+ if (unlikely(mp->oom)) {
+ mp->oom = 0;
+ del_timer(&mp->rx_oom);
+ }
work_done = 0;
while (work_done < budget) {
continue;
}
- queue_mask = mp->work_tx | mp->work_tx_end |
- mp->work_rx | mp->work_rx_refill;
+ queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx;
+ if (likely(!mp->oom))
+ queue_mask |= mp->work_rx_refill;
+
if (!queue_mask) {
if (mv643xx_eth_collect_events(mp))
continue;
txq_maybe_wake(mp->txq + queue);
} else if (mp->work_rx & queue_mask) {
work_done += rxq_process(mp->rxq + queue, work_tbd);
- } else if (mp->work_rx_refill & queue_mask) {
+ } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) {
work_done += rxq_refill(mp->rxq + queue, work_tbd);
} else {
BUG();
}
if (work_done < budget) {
- if (mp->work_rx_oom)
+ if (mp->oom)
mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
napi_complete(napi);
wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
rxq_refill(mp->rxq + i, INT_MAX);
}
- if (mp->work_rx_oom) {
+ if (mp->oom) {
mp->rx_oom.expires = jiffies + (HZ / 10);
add_timer(&mp->rx_oom);
}
dev->ethtool_ops = &ne2k_pci_ethtool_ops;
NS8390_init(dev, 0);
+ memcpy(dev->dev_addr, SA_prom, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
i = register_netdev(dev);
if (i)
goto err_out_free_netdev;
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = SA_prom[i];
printk("%s: %s found at %#lx, IRQ %d, %pM.\n",
dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq,
dev->dev_addr);
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
return 0;
err_out_free_netdev:
struct netconsole_target *nt;
struct net_device *dev = ptr;
- if (!(event == NETDEV_CHANGENAME))
+ if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER))
goto done;
spin_lock_irqsave(&target_list_lock, flags);
case NETDEV_CHANGENAME:
strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ);
break;
+ case NETDEV_UNREGISTER:
+ if (!nt->enabled)
+ break;
+ netpoll_cleanup(&nt->np);
+ nt->enabled = 0;
+ printk(KERN_INFO "netconsole: network logging stopped"
+ ", interface %s unregistered\n",
+ dev->name);
+ break;
}
}
netconsole_target_put(nt);
PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
if (ret) {
pr_debug("%s: WEP/WPA setup failed %d\n", __func__,
ret);
+ ret = -EPERM;
+ gelic_wl_send_iwap_event(wl, NULL);
+ goto out;
}
/* start association */
if (!(tmp & EEPROM_ADDR_COMPLETE))
return -EBUSY;
- *val = tr32(GRC_EEPROM_DATA);
+ tmp = tr32(GRC_EEPROM_DATA);
+
+ /*
+ * The data will always be opposite the native endian
+ * format. Perform a blind byteswap to compensate.
+ */
+ *val = swab32(tmp);
+
return 0;
}
memcpy(&data, buf + i, 4);
- tw32(GRC_EEPROM_DATA, be32_to_cpu(data));
+ /*
+ * The SEEPROM interface expects the data to always be opposite
+ * the native endian format. We accomplish this by reversing
+ * all the operations that would have been performed on the
+ * data from a call to tg3_nvram_read_be32().
+ */
+ tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data)));
val = tr32(GRC_EEPROM_ADDR);
tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
/* Next, try NVRAM. */
if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
!tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
- dev->dev_addr[0] = ((hi >> 16) & 0xff);
- dev->dev_addr[1] = ((hi >> 24) & 0xff);
- dev->dev_addr[2] = ((lo >> 0) & 0xff);
- dev->dev_addr[3] = ((lo >> 8) & 0xff);
- dev->dev_addr[4] = ((lo >> 16) & 0xff);
- dev->dev_addr[5] = ((lo >> 24) & 0xff);
-
+ memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
+ memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
}
/* Finally just fetch it out of the MAC control regs. */
else {
atomic_t count;
struct tun_struct *tun;
struct net *net;
- wait_queue_head_t read_wait;
};
struct tun_sock;
tfile->tun = tun;
tun->tfile = tfile;
dev_hold(tun->dev);
+ sock_hold(tun->sk);
atomic_inc(&tfile->count);
out:
static void __tun_detach(struct tun_struct *tun)
{
- struct tun_file *tfile = tun->tfile;
-
/* Detach from net device */
netif_tx_lock_bh(tun->dev);
- tfile->tun = NULL;
tun->tfile = NULL;
netif_tx_unlock_bh(tun->dev);
/* Inform the methods they need to stop using the dev.
*/
if (tfile) {
- wake_up_all(&tfile->read_wait);
+ wake_up_all(&tun->socket.wait);
if (atomic_dec_and_test(&tfile->count))
__tun_detach(tun);
}
}
+static void tun_free_netdev(struct net_device *dev)
+{
+ struct tun_struct *tun = netdev_priv(dev);
+
+ sock_put(tun->sk);
+}
+
/* Net device open. */
static int tun_net_open(struct net_device *dev)
{
/* Notify and wake up reader process */
if (tun->flags & TUN_FASYNC)
kill_fasync(&tun->fasync, SIGIO, POLL_IN);
- wake_up_interruptible(&tun->tfile->read_wait);
+ wake_up_interruptible(&tun->socket.wait);
return 0;
drop:
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
- poll_wait(file, &tfile->read_wait, wait);
+ poll_wait(file, &tun->socket.wait, wait);
if (!skb_queue_empty(&tun->readq))
mask |= POLLIN | POLLRDNORM;
goto out;
}
- add_wait_queue(&tfile->read_wait, &wait);
+ add_wait_queue(&tun->socket.wait, &wait);
while (len) {
current->state = TASK_INTERRUPTIBLE;
}
current->state = TASK_RUNNING;
- remove_wait_queue(&tfile->read_wait, &wait);
+ remove_wait_queue(&tun->socket.wait, &wait);
out:
tun_put(tun);
tun->group = -1;
dev->ethtool_ops = &tun_ethtool_ops;
- dev->destructor = free_netdev;
+ dev->destructor = tun_free_netdev;
}
/* Trivial set of netlink ops to allow deleting tun or tap
static void tun_sock_destruct(struct sock *sk)
{
- dev_put(container_of(sk, struct tun_sock, sk)->tun->dev);
+ free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev);
}
static struct proto tun_proto = {
struct sock *sk;
struct tun_struct *tun;
struct net_device *dev;
- struct tun_file *tfile = file->private_data;
int err;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!sk)
goto err_free_dev;
- /* This ref count is for tun->sk. */
- dev_hold(dev);
+ init_waitqueue_head(&tun->socket.wait);
sock_init_data(&tun->socket, sk);
sk->sk_write_space = tun_sock_write_space;
- sk->sk_destruct = tun_sock_destruct;
sk->sk_sndbuf = INT_MAX;
- sk->sk_sleep = &tfile->read_wait;
tun->sk = sk;
container_of(sk, struct tun_sock, sk)->tun = tun;
err = -EINVAL;
err = register_netdevice(tun->dev);
if (err < 0)
- goto err_free_dev;
+ goto err_free_sk;
+
+ sk->sk_destruct = tun_sock_destruct;
err = tun_attach(tun, file);
if (err < 0)
- goto err_free_dev;
+ goto failed;
}
DBG(KERN_INFO "%s: tun_set_iff\n", tun->dev->name);
atomic_set(&tfile->count, 0);
tfile->tun = NULL;
tfile->net = get_net(current->nsproxy->net_ns);
- init_waitqueue_head(&tfile->read_wait);
file->private_data = tfile;
return 0;
}
__tun_detach(tun);
/* If desireable, unregister the netdevice. */
- if (!(tun->flags & TUN_PERSIST)) {
- sock_put(tun->sk);
+ if (!(tun->flags & TUN_PERSIST))
unregister_netdevice(tun->dev);
- }
rtnl_unlock();
}
+ tun = tfile->tun;
+ if (tun)
+ sock_put(tun->sk);
+
put_net(tfile->net);
kfree(tfile);
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
- upsmr |= UCC_GETH_UPSMR_RPM;
+ if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII)
+ upsmr |= UCC_GETH_UPSMR_RPM;
switch (ugeth->max_speed) {
case SPEED_10:
upsmr |= UCC_GETH_UPSMR_R10M;
IEEE 802 "local assignment" bit is set in the address, a "usbX"
name is used instead.
+config USB_NET_CDC_EEM
+ tristate "CDC EEM support"
+ depends on USB_USBNET && EXPERIMENTAL
+ help
+ This option supports devices conforming to the Communication Device
+ Class (CDC) Ethernet Emulation Model, a specification that's easy to
+ implement in device firmware. The CDC EEM specifications are available
+ from <http://www.usb.org/>.
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use. However, if the
+ IEEE 802 "local assignment" bit is set in the address, a "usbX"
+ name is used instead.
+
config USB_NET_DM9601
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
obj-$(CONFIG_USB_HSO) += hso.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
--- /dev/null
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD 2 /* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+ dev_kfree_skb(urb->context);
+ usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct urb *urb;
+ int status;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ goto fail;
+
+ usb_fill_bulk_urb(urb, dev->udev, dev->out,
+ skb->data, skb->len, eem_linkcmd_complete, skb);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ usb_free_urb(urb);
+fail:
+ dev_kfree_skb(skb);
+ devwarn(dev, "link cmd failure\n");
+ return;
+ }
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status = 0;
+
+ status = usbnet_get_endpoints(dev, intf);
+ if (status < 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(driver_of(intf), intf);
+ return status;
+ }
+
+ /* no jumbogram (16K) support for now */
+
+ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+ return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ struct sk_buff *skb2 = NULL;
+ u16 len = skb->len;
+ u32 crc = 0;
+ int padlen = 0;
+
+ /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+ * zero, stick two bytes of zero length EEM packet on the end.
+ * Else the framework would add invalid single byte padding,
+ * since it can't know whether ZLPs will be handled right by
+ * all the relevant hardware and software.
+ */
+ if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+ padlen += 2;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((tailroom >= ETH_FCS_LEN + padlen)
+ && (headroom >= EEM_HEAD))
+ goto done;
+
+ if ((headroom + tailroom)
+ > (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+ skb->data = memmove(skb->head +
+ EEM_HEAD,
+ skb->data,
+ skb->len);
+ skb_set_tail_pointer(skb, len);
+ goto done;
+ }
+ }
+
+ skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+ if (!skb2)
+ return NULL;
+
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+
+done:
+ /* we don't use the "no Ethernet CRC" option */
+ crc = crc32_le(~0, skb->data, skb->len);
+ crc = ~crc;
+
+ put_unaligned_le32(crc, skb_put(skb, 4));
+
+ /* EEM packet header format:
+ * b0..13: length of ethernet frame
+ * b14: bmCRC (1 == valid Ethernet CRC)
+ * b15: bmType (0 == data)
+ */
+ len = skb->len;
+ put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+ /* Bundle a zero length EEM packet if needed */
+ if (padlen)
+ put_unaligned_le16(0, skb_put(skb, 2));
+
+ return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /*
+ * Our task here is to strip off framing, leaving skb with one
+ * data frame for the usbnet framework code to process. But we
+ * may have received multiple EEM payloads, or command payloads.
+ * So we must process _everything_ as if it's a header, except
+ * maybe the last data payload
+ *
+ * REVISIT the framework needs updating so that when we consume
+ * all payloads (the last or only message was a command, or a
+ * zero length EEM packet) that is not accounted as an rx_error.
+ */
+ do {
+ struct sk_buff *skb2 = NULL;
+ u16 header;
+ u16 len = 0;
+
+ /* incomplete EEM header? */
+ if (skb->len < EEM_HEAD)
+ return 0;
+
+ /*
+ * EEM packet header format:
+ * b0..14: EEM type dependant (Data or Command)
+ * b15: bmType
+ */
+ header = get_unaligned_le16(skb->data);
+ skb_pull(skb, EEM_HEAD);
+
+ /*
+ * The bmType bit helps to denote when EEM
+ * packet is data or command :
+ * bmType = 0 : EEM data payload
+ * bmType = 1 : EEM (link) command
+ */
+ if (header & BIT(15)) {
+ u16 bmEEMCmd;
+
+ /*
+ * EEM (link) command packet:
+ * b0..10: bmEEMCmdParam
+ * b11..13: bmEEMCmd
+ * b14: bmReserved (must be 0)
+ * b15: 1 (EEM command)
+ */
+ if (header & BIT(14)) {
+ devdbg(dev, "reserved command %04x\n", header);
+ continue;
+ }
+
+ bmEEMCmd = (header >> 11) & 0x7;
+ switch (bmEEMCmd) {
+
+ /* Responding to echo requests is mandatory. */
+ case 0: /* Echo command */
+ len = header & 0x7FF;
+
+ /* bogus command? */
+ if (skb->len < len)
+ return 0;
+
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ goto next;
+ skb_trim(skb2, len);
+ put_unaligned_le16(BIT(15) | (1 << 11) | len,
+ skb_push(skb2, 2));
+ eem_linkcmd(dev, skb2);
+ break;
+
+ /*
+ * Host may choose to ignore hints.
+ * - suspend: peripheral ready to suspend
+ * - response: suggest N millisec polling
+ * - response complete: suggest N sec polling
+ */
+ case 2: /* Suspend hint */
+ case 3: /* Response hint */
+ case 4: /* Response complete hint */
+ continue;
+
+ /*
+ * Hosts should never receive host-to-peripheral
+ * or reserved command codes; or responses to an
+ * echo command we didn't send.
+ */
+ case 1: /* Echo response */
+ case 5: /* Tickle */
+ default: /* reserved */
+ devwarn(dev, "unexpected link command %d\n",
+ bmEEMCmd);
+ continue;
+ }
+
+ } else {
+ u32 crc, crc2;
+ int is_last;
+
+ /* zero length EEM packet? */
+ if (header == 0)
+ continue;
+
+ /*
+ * EEM data packet header :
+ * b0..13: length of ethernet frame
+ * b14: bmCRC
+ * b15: 0 (EEM data)
+ */
+ len = header & 0x3FFF;
+
+ /* bogus EEM payload? */
+ if (skb->len < len)
+ return 0;
+
+ /* bogus ethernet frame? */
+ if (len < (ETH_HLEN + ETH_FCS_LEN))
+ goto next;
+
+ /*
+ * Treat the last payload differently: framework
+ * code expects our "fixup" to have stripped off
+ * headers, so "skb" is a data packet (or error).
+ * Else if it's not the last payload, keep "skb"
+ * for further processing.
+ */
+ is_last = (len == skb->len);
+ if (is_last)
+ skb2 = skb;
+ else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ return 0;
+ }
+
+ crc = get_unaligned_le32(skb2->data
+ + len - ETH_FCS_LEN);
+ skb_trim(skb2, len - ETH_FCS_LEN);
+
+ /*
+ * The bmCRC helps to denote when the CRC field in
+ * the Ethernet frame contains a calculated CRC:
+ * bmCRC = 1 : CRC is calculated
+ * bmCRC = 0 : CRC = 0xDEADBEEF
+ */
+ if (header & BIT(14))
+ crc2 = ~crc32_le(~0, skb2->data, len);
+ else
+ crc2 = 0xdeadbeef;
+
+ if (is_last)
+ return crc == crc2;
+
+ if (unlikely(crc != crc2)) {
+ dev->stats.rx_errors++;
+ dev_kfree_skb_any(skb2);
+ } else
+ usbnet_skb_return(dev, skb2);
+ }
+
+next:
+ skb_pull(skb, len);
+ } while (skb->len);
+
+ return 1;
+}
+
+static const struct driver_info eem_info = {
+ .description = "CDC EEM Device",
+ .flags = FLAG_ETHER,
+ .bind = eem_bind,
+ .rx_fixup = eem_rx_fixup,
+ .tx_fixup = eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+ USB_CDC_PROTO_EEM),
+ .driver_info = (unsigned long) &eem_info,
+},
+{
+ /* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+ .name = "cdc_eem",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+
+static int __init eem_init(void)
+{
+ return usb_register(&eem_driver);
+}
+module_init(eem_init);
+
+static void __exit eem_exit(void)
+{
+ usb_deregister(&eem_driver);
+}
+module_exit(eem_exit);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");
/* cleanup should already have been scheduled */
break;
case -ENODEV: /* disconnect() upcoming */
+ case -EPERM:
netif_device_detach(pegasus->net);
break;
default:
if (netif_msg_ifup(dev))
devdbg(dev, "ID_REV = 0x%08x", read_buf);
+ /* Configure GPIO pins as LED outputs */
+ write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+ LED_GPIO_CFG_FDX_LED;
+ ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+ if (ret < 0) {
+ devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d",
+ ret);
+ return ret;
+ }
+
/* Init Tx */
write_buf = 0;
ret = smsc95xx_write_reg(dev, FLOW, write_buf);
USB_DEVICE(0x0424, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device */
+ USB_DEVICE(0x0424, 0xec00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
#define PM_CTL_WUPS_MULTI_ (0x00000003)
#define LED_GPIO_CFG (0x24)
+#define LED_GPIO_CFG_SPD_LED (0x01000000)
+#define LED_GPIO_CFG_LNK_LED (0x00100000)
+#define LED_GPIO_CFG_FDX_LED (0x00010000)
#define GPIO_CFG (0x28)
static struct net_device_stats *veth_get_stats(struct net_device *dev)
{
- struct veth_priv *priv;
- struct net_device_stats *dev_stats;
- int cpu;
+ struct veth_priv *priv = netdev_priv(dev);
+ struct net_device_stats *dev_stats = &dev->stats;
+ unsigned int cpu;
struct veth_net_stats *stats;
- priv = netdev_priv(dev);
- dev_stats = &dev->stats;
-
dev_stats->rx_packets = 0;
dev_stats->tx_packets = 0;
dev_stats->rx_bytes = 0;
dev_stats->tx_dropped = 0;
dev_stats->rx_dropped = 0;
- for_each_online_cpu(cpu) {
- stats = per_cpu_ptr(priv->stats, cpu);
+ if (priv->stats)
+ for_each_online_cpu(cpu) {
+ stats = per_cpu_ptr(priv->stats, cpu);
- dev_stats->rx_packets += stats->rx_packets;
- dev_stats->tx_packets += stats->tx_packets;
- dev_stats->rx_bytes += stats->rx_bytes;
- dev_stats->tx_bytes += stats->tx_bytes;
- dev_stats->tx_dropped += stats->tx_dropped;
- dev_stats->rx_dropped += stats->rx_dropped;
- }
+ dev_stats->rx_packets += stats->rx_packets;
+ dev_stats->tx_packets += stats->tx_packets;
+ dev_stats->rx_bytes += stats->rx_bytes;
+ dev_stats->tx_bytes += stats->tx_bytes;
+ dev_stats->tx_dropped += stats->tx_dropped;
+ dev_stats->rx_dropped += stats->rx_dropped;
+ }
return dev_stats;
}
netif_carrier_off(dev);
netif_carrier_off(priv->peer);
+ free_percpu(priv->stats);
+ priv->stats = NULL;
return 0;
}
return 0;
}
-static void veth_dev_free(struct net_device *dev)
-{
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- free_percpu(priv->stats);
- free_netdev(dev);
-}
-
static const struct net_device_ops veth_netdev_ops = {
.ndo_init = veth_dev_init,
.ndo_open = veth_open,
dev->netdev_ops = &veth_netdev_ops;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
- dev->destructor = veth_dev_free;
+ dev->destructor = free_netdev;
}
/*
static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
struct scatterlist *data, int out, int in)
{
- struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
+ struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
struct virtio_net_ctrl_hdr ctrl;
virtio_net_ctrl_ack status = ~0;
unsigned int tmp;
+ int i;
if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
BUG(); /* Caller should know better */
sg_init_table(sg, out + in);
sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
- memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2));
+ for_each_sg(data, s, out + in - 2, i)
+ sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
promisc = ((dev->flags & IFF_PROMISC) != 0);
allmulti = ((dev->flags & IFF_ALLMULTI) != 0);
- sg_set_buf(sg, &promisc, sizeof(promisc));
+ sg_init_one(sg, &promisc, sizeof(promisc));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
VIRTIO_NET_CTRL_RX_PROMISC,
dev_warn(&dev->dev, "Failed to %sable promisc mode.\n",
promisc ? "en" : "dis");
- sg_set_buf(sg, &allmulti, sizeof(allmulti));
+ sg_init_one(sg, &allmulti, sizeof(allmulti));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
VIRTIO_NET_CTRL_RX_ALLMULTI,
return;
}
+ sg_init_table(sg, 2);
+
/* Store the unicast list and count in the front of the buffer */
mac_data->entries = dev->uc_count;
addr = dev->uc_list;
kfree(buf);
}
-static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
{
struct virtnet_info *vi = netdev_priv(dev);
struct scatterlist sg;
- sg_set_buf(&sg, &vid, sizeof(vid));
+ sg_init_one(&sg, &vid, sizeof(vid));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0))
dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
}
-static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
{
struct virtnet_info *vi = netdev_priv(dev);
struct scatterlist sg;
- sg_set_buf(&sg, &vid, sizeof(vid));
+ sg_init_one(&sg, &vid, sizeof(vid));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0))
.ndo_set_mac_address = virtnet_set_mac_address,
.ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
- .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid,
+ .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
#endif
local->config.authType = AUTH_ENCRYPT;
} else
return -EINVAL;
- break;
/* Commit the changes to flags if needed */
if (local->config.authType != currentAuthType)
set_bit (FLAG_COMMIT, &local->flags);
+ break;
}
case IW_AUTH_WPA_ENABLED:
struct ar9170_rx_head {
u8 plcp[12];
-};
+} __packed;
struct ar9170_rx_tail {
union {
u8 rssi_ant0, rssi_ant1, rssi_ant2,
rssi_ant0x, rssi_ant1x, rssi_ant2x,
rssi_combined;
- };
+ } __packed;
u8 rssi[7];
- };
+ } __packed;
u8 evm_stream0[6], evm_stream1[6];
u8 phy_err;
u8 SAidx, DAidx;
u8 error;
u8 status;
-};
+} __packed;
#define AR9170_ENC_ALG_NONE 0x0
#define AR9170_ENC_ALG_WEP64 0x1
{ USB_DEVICE(0x0cf3, 0x9170) },
/* Atheros TG121N */
{ USB_DEVICE(0x0cf3, 0x1001) },
+ /* Cace Airpcap NX */
+ { USB_DEVICE(0xcace, 0x0300) },
/* D-Link DWA 160A */
{ USB_DEVICE(0x07d1, 0x3c10) },
/* Netgear WNDA3100 */
{ USB_DEVICE(0x0846, 0x9001) },
/* Zydas ZD1221 */
{ USB_DEVICE(0x0ace, 0x1221) },
+ /* ZyXEL NWD271N */
+ { USB_DEVICE(0x0586, 0x3417) },
/* Z-Com UB81 BG */
{ USB_DEVICE(0x0cde, 0x0023) },
/* Z-Com UB82 ABG */
return 0;
}
+static int ar9170_usb_init_device(struct ar9170_usb *aru)
+{
+ int err;
+
+ err = ar9170_usb_alloc_rx_irq_urb(aru);
+ if (err)
+ goto err_out;
+
+ err = ar9170_usb_alloc_rx_bulk_urbs(aru);
+ if (err)
+ goto err_unrx;
+
+ err = ar9170_usb_upload_firmware(aru);
+ if (err) {
+ err = ar9170_echo_test(&aru->common, 0x60d43110);
+ if (err) {
+ /* force user invention, by disabling the device */
+ err = usb_driver_set_configuration(aru->udev, -1);
+ dev_err(&aru->udev->dev, "device is in a bad state. "
+ "please reconnect it!\n");
+ goto err_unrx;
+ }
+ }
+
+ return 0;
+
+err_unrx:
+ ar9170_usb_cancel_urbs(aru);
+
+err_out:
+ return err;
+}
+
static int ar9170_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
err = ar9170_usb_reset(aru);
if (err)
- goto err_unlock;
+ goto err_freehw;
err = ar9170_usb_request_firmware(aru);
if (err)
- goto err_unlock;
+ goto err_freehw;
- err = ar9170_usb_alloc_rx_irq_urb(aru);
+ err = ar9170_usb_init_device(aru);
if (err)
goto err_freefw;
- err = ar9170_usb_alloc_rx_bulk_urbs(aru);
- if (err)
- goto err_unrx;
-
- err = ar9170_usb_upload_firmware(aru);
- if (err) {
- err = ar9170_echo_test(&aru->common, 0x60d43110);
- if (err) {
- /* force user invention, by disabling the device */
- err = usb_driver_set_configuration(aru->udev, -1);
- dev_err(&aru->udev->dev, "device is in a bad state. "
- "please reconnect it!\n");
- goto err_unrx;
- }
- }
-
err = ar9170_usb_open(ar);
if (err)
goto err_unrx;
release_firmware(aru->init_values);
release_firmware(aru->firmware);
-err_unlock:
+err_freehw:
usb_set_intfdata(intf, NULL);
usb_put_dev(udev);
ieee80211_free_hw(ar->hw);
ieee80211_free_hw(aru->common.hw);
}
+#ifdef CONFIG_PM
+static int ar9170_suspend(struct usb_interface *intf,
+ pm_message_t message)
+{
+ struct ar9170_usb *aru = usb_get_intfdata(intf);
+
+ if (!aru)
+ return -ENODEV;
+
+ aru->common.state = AR9170_IDLE;
+ ar9170_usb_cancel_urbs(aru);
+
+ return 0;
+}
+
+static int ar9170_resume(struct usb_interface *intf)
+{
+ struct ar9170_usb *aru = usb_get_intfdata(intf);
+ int err;
+
+ if (!aru)
+ return -ENODEV;
+
+ usb_unpoison_anchored_urbs(&aru->rx_submitted);
+ usb_unpoison_anchored_urbs(&aru->tx_submitted);
+
+ /*
+ * FIXME: firmware upload will fail on resume.
+ * but this is better than a hang!
+ */
+
+ err = ar9170_usb_init_device(aru);
+ if (err)
+ goto err_unrx;
+
+ err = ar9170_usb_open(&aru->common);
+ if (err)
+ goto err_unrx;
+
+ return 0;
+
+err_unrx:
+ aru->common.state = AR9170_IDLE;
+ ar9170_usb_cancel_urbs(aru);
+
+ return err;
+}
+#endif /* CONFIG_PM */
+
static struct usb_driver ar9170_driver = {
.name = "ar9170usb",
.probe = ar9170_usb_probe,
.disconnect = ar9170_usb_disconnect,
.id_table = ar9170_usb_ids,
.soft_unbind = 1,
+#ifdef CONFIG_PM
+ .suspend = ar9170_suspend,
+ .resume = ar9170_resume,
+#endif /* CONFIG_PM */
};
static int __init ar9170_init(void)
{ USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
/* Siemens Gigaset USB WLAN Adapter 11 */
{ USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
+ /* OQO Model 01+ Internal Wi-Fi */
+ { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
/*
* at76c505amx-rfmd
*/
for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
struct ieee80211_supported_band *band = &sc->sbands[b];
- char bname[5];
+ char bname[6];
switch (band->band) {
case IEEE80211_BAND_2GHZ:
strcpy(bname, "2 GHz");
int hdrlen, padsize, retval;
bool decrypt_error = false;
u8 keyix;
+ __le16 fc;
spin_lock_bh(&sc->rx.rxbuflock);
/* see if any padding is done by the hw and remove it */
hdr = (struct ieee80211_hdr *)skb->data;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ fc = hdr->frame_control;
/* The MAC header is padded to have 32-bit boundary if the
* packet payload is non-zero. The general calculation for
sc->rx.rxotherant = 0;
}
- if (ieee80211_is_beacon(hdr->frame_control) &&
+ if (ieee80211_is_beacon(fc) &&
(sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) {
sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
.ndo_set_mac_address = atmel_set_mac_address,
.ndo_start_xmit = start_tx,
.ndo_do_ioctl = atmel_ioctl,
- .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
return 1;
}
+static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
+{
+ unsigned char *f = skb->data + ring->frameoffset;
+
+ return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF);
+}
+
+static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb)
+{
+ struct b43_rxhdr_fw4 *rxhdr;
+ unsigned char *frame;
+
+ /* This poisons the RX buffer to detect DMA failures. */
+
+ rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
+ rxhdr->frame_len = 0;
+
+ B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2);
+ frame = skb->data + ring->frameoffset;
+ memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */);
+}
+
static int setup_rx_descbuffer(struct b43_dmaring *ring,
struct b43_dmadesc_generic *desc,
struct b43_dmadesc_meta *meta, gfp_t gfp_flags)
{
- struct b43_rxhdr_fw4 *rxhdr;
dma_addr_t dmaaddr;
struct sk_buff *skb;
skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
if (unlikely(!skb))
return -ENOMEM;
+ b43_poison_rx_buffer(ring, skb);
dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
/* ugh. try to realloc in zone_dma */
skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
if (unlikely(!skb))
return -ENOMEM;
+ b43_poison_rx_buffer(ring, skb);
dmaaddr = map_descbuffer(ring, skb->data,
ring->rx_buffersize, 0);
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
ring->ops->fill_descriptor(ring, desc, dmaaddr,
ring->rx_buffersize, 0, 0, 0);
- rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
- rxhdr->frame_len = 0;
-
return 0;
}
len = le16_to_cpu(rxhdr->frame_len);
} while (len == 0 && i++ < 5);
if (unlikely(len == 0)) {
- /* recycle the descriptor buffer. */
- sync_descbuffer_for_device(ring, meta->dmaaddr,
- ring->rx_buffersize);
- goto drop;
+ dmaaddr = meta->dmaaddr;
+ goto drop_recycle_buffer;
}
}
+ if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) {
+ /* Something went wrong with the DMA.
+ * The device did not touch the buffer and did not overwrite the poison. */
+ b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n");
+ dmaaddr = meta->dmaaddr;
+ goto drop_recycle_buffer;
+ }
if (unlikely(len > ring->rx_buffersize)) {
/* The data did not fit into one descriptor buffer
* and is split over multiple buffers.
while (1) {
desc = ops->idx2desc(ring, *slot, &meta);
/* recycle the descriptor buffer. */
+ b43_poison_rx_buffer(ring, meta->skb);
sync_descbuffer_for_device(ring, meta->dmaaddr,
ring->rx_buffersize);
*slot = next_slot(ring, *slot);
err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC);
if (unlikely(err)) {
b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n");
- sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
- goto drop;
+ goto drop_recycle_buffer;
}
unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
b43_rx(ring->dev, skb, rxhdr);
drop:
return;
+
+drop_recycle_buffer:
+ /* Poison and recycle the RX buffer. */
+ b43_poison_rx_buffer(ring, skb);
+ sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
}
void b43_dma_rx(struct b43_dmaring *ring)
phy->next_txpwr_check_time = jiffies;
/* PHY TX errors counter. */
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
+
+#if B43_DEBUG
+ phy->phy_locked = 0;
+ phy->radio_locked = 0;
+#endif
}
static void setup_struct_wldev_for_init(struct b43_wldev *dev)
{
u32 macctl;
+#if B43_DEBUG
+ B43_WARN_ON(dev->phy.radio_locked);
+ dev->phy.radio_locked = 1;
+#endif
+
macctl = b43_read32(dev, B43_MMIO_MACCTL);
- B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK);
macctl |= B43_MACCTL_RADIOLOCK;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
- /* Commit the write and wait for the device
- * to exit any radio register access. */
+ /* Commit the write and wait for the firmware
+ * to finish any radio register access. */
b43_read32(dev, B43_MMIO_MACCTL);
udelay(10);
}
{
u32 macctl;
+#if B43_DEBUG
+ B43_WARN_ON(!dev->phy.radio_locked);
+ dev->phy.radio_locked = 0;
+#endif
+
/* Commit any write */
b43_read16(dev, B43_MMIO_PHY_VER);
/* unlock */
macctl = b43_read32(dev, B43_MMIO_MACCTL);
- B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK));
macctl &= ~B43_MACCTL_RADIOLOCK;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
}
atomic_t txerr_cnt;
#ifdef CONFIG_B43_DEBUG
- /* PHY registers locked by b43_phy_lock()? */
+ /* PHY registers locked (w.r.t. firmware) */
bool phy_locked;
+ /* Radio registers locked (w.r.t. firmware) */
+ bool radio_locked;
#endif /* B43_DEBUG */
};
return -ENOMEM;
}
} else
- iwl_rx_queue_reset(priv, rxq);
+ iwl3945_rx_queue_reset(priv, rxq);
iwl3945_rx_replenish(priv);
extern int iwl3945_tx_queue_init(struct iwl_priv *priv,
struct iwl_tx_queue *txq, int count, u32 id);
extern void iwl3945_rx_replenish(void *data);
+extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq);
extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len,
const void *data);
rxq->queue[i] = NULL;
- dma_sync_single_range_for_cpu(
- &priv->pci_dev->dev, rxb->real_dma_addr,
- rxb->aligned_dma_addr - rxb->real_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
+ PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Reclaim a command buffer only if this packet is a response
rxb->skb = NULL;
}
- pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
- priv->hw_params.rx_buf_size + 256,
- PCI_DMA_FROMDEVICE);
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
/* EEPROM GP */
-#define CSR_EEPROM_GP_VALID_MSK (0x00000006)
+#define CSR_EEPROM_GP_VALID_MSK (0x00000007)
#define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000)
#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
/**
* struct iwl_rx_queue - Rx queue
+ * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
+ * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
* @read: Shared index to newest available Rx buffer
* @write: Shared index to oldest written Rx packet
* @free_count: Number of pre-allocated buffers in rx_free
* @rx_free: list of free SKBs for use
* @rx_used: List of Rx buffers with no SKB
* @need_update: flag to indicate we need to update read/write index
+ * @rb_stts: driver's pointer to receive buffer status
+ * @rb_stts_dma: bus address of receive buffer status
*
* NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
*/
IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
+ ieee80211_scan_completed(priv->hw, false);
+
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- ieee80211_scan_completed(priv->hw, false);
-
/* Since setting the TXPOWER may have been deferred while
* performing the scan, fire one off */
mutex_lock(&priv->mutex);
/* Copy MAC header from skb into command buffer */
memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+ /* Total # bytes to be transmitted */
+ len = (u16)skb->len;
+ tx_cmd->len = cpu_to_le16(len);
+
+ if (info->control.hw_key)
+ iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+
+ /* TODO need this for burst mode later on */
+ iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
+
+ /* set is_hcca to 0; it probably will never be implemented */
+ iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+
+ iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
+
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
else
len_org = 0;
+ /* Tell NIC about any 2-byte padding after MAC header */
+ if (len_org)
+ tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
+
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys = pci_map_single(priv->pci_dev,
- out_cmd, sizeof(struct iwl_cmd),
+ &out_cmd->hdr, len,
PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
- pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
+ pci_unmap_len_set(&out_cmd->meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
- txcmd_phys += offsetof(struct iwl_cmd, hdr);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
txcmd_phys, len, 1, 0);
- if (info->control.hw_key)
- iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
+ txq->need_update = 1;
+ if (qc)
+ priv->stations[sta_id].tid[tid].seq_number = seq_number;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
0, 0);
}
- /* Tell NIC about any 2-byte padding after MAC header */
- if (len_org)
- tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
-
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx_cmd->len = cpu_to_le16(len);
- /* TODO need this for burst mode later on */
- iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
-
- iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
-
scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
- offsetof(struct iwl_tx_cmd, scratch);
+ offsetof(struct iwl_tx_cmd, scratch);
+
+ len = sizeof(struct iwl_tx_cmd) +
+ sizeof(struct iwl_cmd_header) + hdr_len;
+ /* take back ownership of DMA buffer to enable update */
+ pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys,
+ len, PCI_DMA_BIDIRECTIONAL);
tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- if (qc)
- priv->stations[sta_id].tid[tid].seq_number = seq_number;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
+ IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+ le16_to_cpu(out_cmd->hdr.sequence));
+ IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
-
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
- priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len);
+ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+ le16_to_cpu(tx_cmd->len));
+
+ pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
+ len, PCI_DMA_BIDIRECTIONAL);
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
INDEX_TO_SEQ(q->write_ptr));
if (out_cmd->meta.flags & CMD_SIZE_HUGE)
out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
- len = (idx == TFD_CMD_SLOTS) ?
- IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
-
- phys_addr = pci_map_single(priv->pci_dev, out_cmd,
- len, PCI_DMA_BIDIRECTIONAL);
- pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
- pci_unmap_len_set(&out_cmd->meta, len, len);
- phys_addr += offsetof(struct iwl_cmd, hdr);
+ len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta);
+ len += (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : 0;
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- phys_addr, fix_size, 1,
- U32_PAD(cmd->len));
#ifdef CONFIG_IWLWIFI_DEBUG
switch (out_cmd->hdr.cmd) {
/* Set up entry in queue's byte count circular buffer */
priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
+ phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+ fix_size, PCI_DMA_BIDIRECTIONAL);
+ pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
+ pci_unmap_len_set(&out_cmd->meta, len, fix_size);
+
+ priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+ phys_addr, fix_size, 1,
+ U32_PAD(cmd->len));
+
/* Increment and update queue's write index */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
ret = iwl_txq_update_write_ptr(priv, txq);
dma_addr_t phys_addr;
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
- u16 len, idx, len_org, hdr_len;
+ u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */
u8 id;
u8 unicast;
u8 sta_id;
/* Copy MAC header from skb into command buffer */
memcpy(tx->hdr, hdr, hdr_len);
+
+ if (info->control.hw_key)
+ iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
+
+ /* TODO need this for burst mode later on */
+ iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
+
+ /* set is_hcca to 0; it probably will never be implemented */
+ iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
+
+ /* Total # bytes to be transmitted */
+ len = (u16)skb->len;
+ tx->len = cpu_to_le16(len);
+
+
+ tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+ tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
+ txq->need_update = 1;
+ if (qc)
+ priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
+
+ IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+ le16_to_cpu(out_cmd->hdr.sequence));
+ IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
+ iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+ ieee80211_hdrlen(fc));
+
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
- txcmd_phys = pci_map_single(priv->pci_dev,
- out_cmd, sizeof(struct iwl_cmd),
- PCI_DMA_TODEVICE);
+ txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+ len, PCI_DMA_TODEVICE);
+ /* we do not map meta data ... so we can safely access address to
+ * provide to unmap command*/
pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
- pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
- /* Add buffer containing Tx command and MAC(!) header to TFD's
- * first entry */
- txcmd_phys += offsetof(struct iwl_cmd, hdr);
+ pci_unmap_len_set(&out_cmd->meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
txcmd_phys, len, 1, 0);
- if (info->control.hw_key)
- iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
0, U32_PAD(len));
}
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx->len = cpu_to_le16(len);
-
- /* TODO need this for burst mode later on */
- iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
- tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
- tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- if (qc)
- priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
- iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
-
- iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
- ieee80211_hdrlen(fc));
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
spin_unlock_irqrestore(&rxq->lock, flags);
}
+void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
+ priv->alloc_rxb_skb--;
+ dev_kfree_skb(rxq->pool[i].skb);
+ rxq->pool[i].skb = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
/*
* this should be called while priv->lock is locked
*/
spin_unlock_irqrestore(&priv->lock, flags);
}
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rxq->pool[i].skb);
+ }
+ }
+
+ pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->dma_addr);
+ pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
+ rxq->rb_stts, rxq->rb_stts_dma);
+ rxq->bd = NULL;
+ rxq->rb_stts = NULL;
+}
+EXPORT_SYMBOL(iwl3945_rx_queue_free);
+
+
/* Convert linear signal-to-noise ratio into dB */
static u8 ratio2dB[100] = {
/* 0 1 2 3 4 5 6 7 8 9 */
rxq->queue[i] = NULL;
- pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Reclaim a command buffer only if this packet is a response
rxb->skb = NULL;
}
- pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
if (!static_key) {
sta_id = iwl3945_hw_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_MAC80211(priv, "leave - %pMnot in station map.\n",
+ IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
addr);
return -EINVAL;
}
hw->wiphy->custom_regulatory = true;
+ hw->wiphy->max_scan_ssids = 1; /* WILL FIX */
+
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
iwl_rfkill_unregister(priv);
- cancel_delayed_work(&priv->rfkill_poll);
+ cancel_delayed_work_sync(&priv->rfkill_poll);
iwl3945_dealloc_ucode_pci(priv);
if (priv->rxq.bd)
- iwl_rx_queue_free(priv, &priv->rxq);
+ iwl3945_rx_queue_free(priv, &priv->rxq);
iwl3945_hw_txq_ctx_free(priv);
iwl3945_unset_hw_params(priv);
lbs_deb_rx("rx err: frame received with bad length\n");
dev->stats.rx_length_errors++;
ret = 0;
+ dev_kfree_skb(skb);
goto done;
}
lbs_pr_alert("rxpd not ok\n");
dev->stats.rx_errors++;
ret = 0;
+ dev_kfree_skb(skb);
goto done;
}
rx_desc->next_rx_desc_phys_addr =
cpu_to_le32(rxq->rx_desc_dma
+ nexti * sizeof(*rx_desc));
- rx_desc->rx_ctrl =
- cpu_to_le32(MWL8K_RX_CTRL_OWNED_BY_HOST);
+ rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST;
}
return 0;
return rc;
}
-static void __devexit mwl8k_remove(struct pci_dev *pdev)
+static void __devexit mwl8k_shutdown(struct pci_dev *pdev)
{
printk(KERN_ERR "===>%s(%u)\n", __func__, __LINE__);
}
-static void __devexit mwl8k_shutdown(struct pci_dev *pdev)
+static void __devexit mwl8k_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct mwl8k_priv *priv;
}
/* Wait upto 100ms for tx queue to empty */
- k = 100;
- do {
- k--;
+ for (k = 100; k > 0; k--) {
udelay(1000);
ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
&xmitting);
- if (ret)
+ if (ret || !xmitting)
break;
- } while ((k > 0) && xmitting);
+ }
if (k == 0)
ret = -ETIMEDOUT;
* published by the Free Software Foundation.
*/
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
#include <linux/leds.h>
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
enum p54_control_frame_types {
P54_CONTROL_TYPE_SETUP = 0,
FW_STATE_RESETTING,
};
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
#define P54_LED_MAX_NAME_LEN 31
unsigned int registered;
};
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
struct p54_common {
struct ieee80211_hw *hw;
u8 privacy_caps;
u8 rx_keycache_size;
/* LED management */
- #ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
struct p54_led_dev assoc_led;
struct p54_led_dev tx_led;
- #endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
u16 softled_state; /* bit field of glowing LEDs */
};
priv->basic_rate_mask = 0x15f;
skb_queue_head_init(&priv->tx_queue);
dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
struct ieee80211_tx_info *info;
struct p54_tx_info *minfo;
struct p54s_tx_info *dinfo;
+ unsigned long flags;
int ret = 0;
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
while (!list_empty(&priv->tx_pending)) {
entry = list_entry(priv->tx_pending.next,
list_del_init(&entry->tx_list);
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
dinfo = container_of((void *) entry, struct p54s_tx_info,
tx_list);
ret = p54spi_tx_frame(priv, skb);
- spin_lock_bh(&priv->tx_lock);
-
if (ret < 0) {
p54_free_skb(priv->hw, skb);
- goto out;
+ return ret;
}
- }
-out:
- spin_unlock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
return ret;
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
+ unsigned long flags;
BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
list_add_tail(&di->tx_list, &priv->tx_pending);
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
queue_work(priv->hw->workqueue, &priv->work);
}
static void p54spi_op_stop(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
+ unsigned long flags;
if (mutex_lock_interruptible(&priv->mutex)) {
/* FIXME: how to handle this error? */
cancel_work_sync(&priv->work);
p54spi_power_off(priv);
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
INIT_LIST_HEAD(&priv->tx_pending);
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
priv->fw_state = FW_STATE_OFF;
mutex_unlock(&priv->mutex);
{USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
+ {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
mutex_init(&priv->command_lock);
spin_lock_init(&priv->stats_lock);
+ /* because rndis_command() sleeps we need to use workqueue */
+ priv->workqueue = create_singlethread_workqueue("rndis_wlan");
+ INIT_WORK(&priv->work, rndis_wext_worker);
+ INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+
/* try bind rndis_host */
retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS);
if (retval < 0)
disassociate(usbdev, 1);
netif_carrier_off(usbdev->net);
- /* because rndis_command() sleeps we need to use workqueue */
- priv->workqueue = create_singlethread_workqueue("rndis_wlan");
- INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
queue_delayed_work(priv->workqueue, &priv->stats_work,
round_jiffies_relative(STATS_UPDATE_JIFFIES));
- INIT_WORK(&priv->work, rndis_wext_worker);
return 0;
fail:
+ cancel_delayed_work_sync(&priv->stats_work);
+ cancel_work_sync(&priv->work);
+ flush_workqueue(priv->workqueue);
+ destroy_workqueue(priv->workqueue);
+
kfree(priv);
return retval;
}
* Register HW.
*/
status = ieee80211_register_hw(rt2x00dev->hw);
- if (status) {
- rt2x00lib_remove_hw(rt2x00dev);
+ if (status)
return status;
- }
set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
if (retval)
return retval;
- rt2x00pci_free_reg(rt2x00dev);
-
pci_save_state(pci_dev);
pci_disable_device(pci_dev);
return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
{
struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
if (pci_set_power_state(pci_dev, PCI_D0) ||
pci_enable_device(pci_dev) ||
return -EIO;
}
- retval = rt2x00pci_alloc_reg(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2x00lib_resume(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
- return 0;
-
-exit_free_reg:
- rt2x00pci_free_reg(rt2x00dev);
-
- return retval;
+ return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00pci_resume);
#endif /* CONFIG_PM */
if (retval)
return retval;
- rt2x00usb_free_reg(rt2x00dev);
-
/*
* Decrease usbdev refcount.
*/
{
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
usb_get_dev(interface_to_usbdev(usb_intf));
- retval = rt2x00usb_alloc_reg(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2x00lib_resume(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
- return 0;
-
-exit_free_reg:
- rt2x00usb_free_reg(rt2x00dev);
-
- return retval;
+ return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00usb_resume);
#endif /* CONFIG_PM */
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
* pci_write_vpd - Write entry to Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
- * @count: number of bytes to read
- * @val: value to write
+ * @count: number of bytes to write
+ * @buf: buffer containing write data
*
*/
ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
/**
* ht_destroy_irq - destroy an irq created with ht_create_irq
+ * @irq: irq to be destroyed
*
* This reverses ht_create_irq removing the specified irq from
* existence. The irq should be free before this happens.
/**
* pci_read_legacy_io - read byte(s) from legacy I/O port space
* @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
* @buf: buffer to store results
* @off: offset into legacy I/O port space
* @count: number of bytes to read
/**
* pci_write_legacy_io - write byte(s) to legacy I/O port space
* @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
* @buf: buffer containing value to be written
* @off: offset into legacy I/O port space
* @count: number of bytes to write
/**
* pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: dev to cleanup
*
- * If we created resource files for @dev, remove them from sysfs and
+ * If we created resource files for @pdev, remove them from sysfs and
* free their resources.
*/
static void
/**
* pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * @pdev: dev in question
*
- * Walk the resources in @dev creating files for each resource available.
+ * Walk the resources in @pdev creating files for each resource available.
*/
static int pci_create_resource_files(struct pci_dev *pdev)
{
/**
* pci_write_rom - used to enable access to the PCI ROM display
* @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
* @buf: user input
* @off: file offset
* @count: number of byte in input
/**
* pci_read_rom - read a PCI ROM
* @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
* @buf: where to put the data we read from the ROM
* @off: file offset
* @count: number of bytes to read
#define PCI_EXP_SAVE_REGS 7
+#define pcie_cap_has_devctl(type, flags) 1
+#define pcie_cap_has_lnkctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_ENDPOINT || \
+ type == PCI_EXP_TYPE_LEG_END))
+#define pcie_cap_has_sltctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ ((type == PCI_EXP_TYPE_ROOT_PORT) || \
+ (type == PCI_EXP_TYPE_DOWNSTREAM && \
+ (flags & PCI_EXP_FLAGS_SLOT))))
+#define pcie_cap_has_rtctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_RC_EC))
+#define pcie_cap_has_devctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_lnkctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_sltctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+
static int pci_save_pcie_state(struct pci_dev *dev)
{
int pos, i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pos <= 0)
}
cap = (u16 *)&save_state->data[0];
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
return 0;
}
int i = 0, pos;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
return;
cap = (u16 *)&save_state->data[0];
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
}
return max;
}
-void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b)
-{
-}
-
struct pci_bus * pci_create_bus(struct device *parent,
int bus, struct pci_ops *ops, void *sysdata)
{
b->resource[0] = &ioport_resource;
b->resource[1] = &iomem_resource;
- set_pci_bus_resources_arch_default(b);
-
return b;
dev_create_file_err:
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
static void __devinit quirk_disable_msi(struct pci_dev *dev)
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *res = bus->resource[i];
- if (!res)
+ if (!res || !res->end)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %s %pR\n", i,
- (res->flags & IORESOURCE_IO) ? "io: " : "mem:", res);
+ (res->flags & IORESOURCE_IO) ? "io: " :
+ ((res->flags & IORESOURCE_PREFETCH)? "pref mem":"mem:"),
+ res);
}
}
/**
* pci_renumber_slot - update %struct pci_slot -> number
- * @slot - %struct pci_slot to update
- * @slot_nr - new number for slot
+ * @slot: &struct pci_slot to update
+ * @slot_nr: new number for slot
*
* The primary purpose of this interface is to allow callers who earlier
* created a placeholder slot in pci_create_slot() by passing a -1 as
{
int ret;
+ if (!platform_scoop_config)
+ return -ENODEV;
+
sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
struct input_dev *key_dev = sony_laptop_input.key_dev;
struct sony_laptop_keypress kp = { NULL };
- if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+ if (event == SONYPI_EVENT_FNKEY_RELEASED ||
+ event == SONYPI_EVENT_ANYBUTTON_RELEASED) {
/* Nothing, not all VAIOs generate this event */
return;
}
{ 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0x86, SONYPI_EVENT_PKEY_P5 },
{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
- { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED },
{ 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0, 0 },
sony_call_snc_handle(0x0100, 0, &result);
sony_call_snc_handle(0x0101, 0, &result);
sony_call_snc_handle(0x0102, 0x100, &result);
+ sony_call_snc_handle(0x0127, 0, &result);
return 0;
}
/* set the last requested brightness level */
if (sony_backlight_device &&
- !sony_backlight_update_status(sony_backlight_device))
+ sony_backlight_update_status(sony_backlight_device) < 0)
printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
return 0;
err = rfkill_register(sony_wifi_rfkill);
if (err)
rfkill_free(sony_wifi_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
+ sony_nc_rfkill_set(sony_wifi_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_bluetooth_rfkill);
if (err)
rfkill_free(sony_bluetooth_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
+ sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_wwan_rfkill);
if (err)
rfkill_free(sony_wwan_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
+ sony_nc_rfkill_set(sony_wwan_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_wimax_rfkill);
if (err)
rfkill_free(sony_wimax_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
+ sony_nc_rfkill_set(sony_wimax_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
* 02110-1301, USA.
*/
-#define TPACPI_VERSION "0.22"
+#define TPACPI_VERSION "0.23"
#define TPACPI_SYSFS_VERSION 0x020300
/*
static struct workqueue_struct *tpacpi_wq;
+enum led_status_t {
+ TPACPI_LED_OFF = 0,
+ TPACPI_LED_ON,
+ TPACPI_LED_BLINK,
+};
+
/* Special LED class that can defer work */
struct tpacpi_led_classdev {
struct led_classdev led_classdev;
struct work_struct work;
- enum led_brightness new_brightness;
+ enum led_status_t new_state;
unsigned int led;
};
return len;
}
-static void hotkey_enabledisable_warn(void)
+static void hotkey_enabledisable_warn(bool enable)
{
tpacpi_log_usertask("procfs hotkey enable/disable");
- WARN(1, TPACPI_WARN
- "hotkey enable/disable functionality has been "
- "removed from the driver. Hotkeys are always enabled.\n");
+ if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
+ TPACPI_WARN
+ "hotkey enable/disable functionality has been "
+ "removed from the driver. Hotkeys are always "
+ "enabled\n"))
+ printk(TPACPI_ERR
+ "Please remove the hotkey=enable module "
+ "parameter, it is deprecated. Hotkeys are always "
+ "enabled\n");
}
static int hotkey_write(char *buf)
res = 0;
while ((cmd = next_cmd(&buf))) {
if (strlencmp(cmd, "enable") == 0) {
- hotkey_enabledisable_warn();
+ hotkey_enabledisable_warn(1);
} else if (strlencmp(cmd, "disable") == 0) {
- hotkey_enabledisable_warn();
+ hotkey_enabledisable_warn(0);
res = -EPERM;
} else if (strlencmp(cmd, "reset") == 0) {
mask = hotkey_orig_mask;
container_of(work, struct tpacpi_led_classdev, work);
if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
- light_set_status((data->new_brightness != LED_OFF));
+ light_set_status((data->new_state != TPACPI_LED_OFF));
}
static void light_sysfs_set(struct led_classdev *led_cdev,
container_of(led_cdev,
struct tpacpi_led_classdev,
led_classdev);
- data->new_brightness = brightness;
+ data->new_state = (brightness != LED_OFF) ?
+ TPACPI_LED_ON : TPACPI_LED_OFF;
queue_work(tpacpi_wq, &data->work);
}
TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */
};
-enum led_status_t {
- TPACPI_LED_OFF = 0,
- TPACPI_LED_ON,
- TPACPI_LED_BLINK,
-};
-
static enum led_access_mode led_supported;
TPACPI_HANDLE(led, ec, "SLED", /* 570 */
return rc;
}
-static void led_sysfs_set_status(unsigned int led,
- enum led_brightness brightness)
-{
- led_set_status(led,
- (brightness == LED_OFF) ?
- TPACPI_LED_OFF :
- (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
- TPACPI_LED_BLINK : TPACPI_LED_ON);
-}
-
static void led_set_status_worker(struct work_struct *work)
{
struct tpacpi_led_classdev *data =
container_of(work, struct tpacpi_led_classdev, work);
if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
- led_sysfs_set_status(data->led, data->new_brightness);
+ led_set_status(data->led, data->new_state);
}
static void led_sysfs_set(struct led_classdev *led_cdev,
struct tpacpi_led_classdev *data = container_of(led_cdev,
struct tpacpi_led_classdev, led_classdev);
- data->new_brightness = brightness;
+ if (brightness == LED_OFF)
+ data->new_state = TPACPI_LED_OFF;
+ else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK)
+ data->new_state = TPACPI_LED_ON;
+ else
+ data->new_state = TPACPI_LED_BLINK;
+
queue_work(tpacpi_wq, &data->work);
}
} else if ((*delay_on != 500) || (*delay_off != 500))
return -EINVAL;
- data->new_brightness = TPACPI_LED_BLINK;
+ data->new_state = TPACPI_LED_BLINK;
queue_work(tpacpi_wq, &data->work);
return 0;
MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
+/*
+ * This will autoload the driver in almost every ThinkPad
+ * in widespread use.
+ *
+ * Only _VERY_ old models, like the 240, 240x and 570 lack
+ * the HKEY event interface.
+ */
+MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids);
+
/*
* DMI matching for module autoloading
*
#define IBM_BIOS_MODULE_ALIAS(__type) \
MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
-/* Non-ancient thinkpads */
-MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
-MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
-
/* Ancient thinkpad BIOSes have to be identified by
* BIOS type or model number, and there are far less
* BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
-IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
-IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
+IBM_BIOS_MODULE_ALIAS("I[MU]"); /* 570, 570e */
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_AUTHOR("Borislav Deianov <borislav@users.sf.net>");
+MODULE_AUTHOR("Henrique de Moraes Holschuh <hmh@hmh.eng.br>");
MODULE_DESCRIPTION(TPACPI_DESC);
MODULE_VERSION(TPACPI_VERSION);
MODULE_LICENSE("GPL");
static int bq24022_is_enabled(struct regulator_dev *rdev)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
return !gpio_get_value(pdata->gpio_nce);
}
err = regulator_check_drms(rdev);
if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
- !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
- return;
+ !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
+ return;
/* get output voltage */
output_uV = rdev->desc->ops->get_voltage(rdev);
int cmin = constraints->min_uV;
int cmax = constraints->max_uV;
- /* it's safe to autoconfigure fixed-voltage supplies */
+ /* it's safe to autoconfigure fixed-voltage supplies
+ and the constraints are used by list_voltage. */
if (count == 1 && !cmin) {
- cmin = INT_MIN;
+ cmin = 1;
cmax = INT_MAX;
+ constraints->min_uV = cmin;
+ constraints->max_uV = cmax;
}
/* voltage constraints are optional */
if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
return ERR_PTR(-EINVAL);
- if (!regulator_desc->type == REGULATOR_VOLTAGE &&
- !regulator_desc->type == REGULATOR_CURRENT)
+ if (regulator_desc->type != REGULATOR_VOLTAGE &&
+ regulator_desc->type != REGULATOR_CURRENT)
return ERR_PTR(-EINVAL);
if (!init_data)
scrub:
device_unregister(&rdev->dev);
+ /* device core frees rdev */
+ rdev = ERR_PTR(ret);
+ goto out;
+
clean:
kfree(rdev);
rdev = ERR_PTR(ret);
* sysfs_streq() doesn't need the \n's, but we add them so the strings
* will be shared with show_mode(), above.
*/
- if (sysfs_streq(buf, "fast\n") == 0)
+ if (sysfs_streq(buf, "fast\n"))
mode = REGULATOR_MODE_FAST;
- else if (sysfs_streq(buf, "normal\n") == 0)
+ else if (sysfs_streq(buf, "normal\n"))
mode = REGULATOR_MODE_NORMAL;
- else if (sysfs_streq(buf, "idle\n") == 0)
+ else if (sysfs_streq(buf, "idle\n"))
mode = REGULATOR_MODE_IDLE;
- else if (sysfs_streq(buf, "standby\n") == 0)
+ else if (sysfs_streq(buf, "standby\n"))
mode = REGULATOR_MODE_STANDBY;
else {
dev_err(dev, "Configuring invalid mode\n");
extern void tape_state_set(struct tape_device *, enum tape_state);
extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
-extern int tape_generic_offline(struct tape_device *device);
+extern int tape_generic_offline(struct ccw_device *);
/* Externals from tape_devmap.c */
extern int tape_generic_probe(struct ccw_device *);
);
}
-static int
-tape_34xx_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_34xx_driver = {
.name = "tape_34xx",
.owner = THIS_MODULE,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
.set_online = tape_34xx_online,
- .set_offline = tape_34xx_offline,
+ .set_offline = tape_generic_offline,
};
static int
&tape_discipline_3590);
}
-static int
-tape_3590_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_3590_driver = {
.name = "tape_3590",
.owner = THIS_MODULE,
.ids = tape_3590_ids,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
- .set_offline = tape_3590_offline,
+ .set_offline = tape_generic_offline,
.set_online = tape_3590_online,
};
* Manual offline is only allowed while the drive is not in use.
*/
int
-tape_generic_offline(struct tape_device *device)
+tape_generic_offline(struct ccw_device *cdev)
{
+ struct tape_device *device;
+
+ device = cdev->dev.driver_data;
if (!device) {
return -ENODEV;
}
ccw_device_set_online(adapter->ccw_device);
zfcp_erp_wait(adapter);
- wait_event(adapter->erp_done_wqh,
- !(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING));
+ flush_work(&unit->scsi_work);
down(&zfcp_data.config_sema);
zfcp_unit_put(unit);
atomic_set(&unit->refcount, 0);
init_waitqueue_head(&unit->remove_wq);
+ INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
unit->port = port;
unit->fcp_lun = fcp_lun;
atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
+ zfcp_fc_nameserver_init(adapter);
+
if (!zfcp_adapter_scsi_register(adapter))
return 0;
cancel_work_sync(&adapter->scan_work);
cancel_work_sync(&adapter->stat_work);
- cancel_delayed_work_sync(&adapter->nsp.work);
zfcp_adapter_scsi_unregister(adapter);
sysfs_remove_group(&adapter->ccw_device->dev.kobj,
&zfcp_sysfs_adapter_attrs);
list_del(&port->list);
write_unlock_irq(&zfcp_data.config_lock);
if (port->rport)
- fc_remote_port_delete(port->rport);
- port->rport = NULL;
+ port->rport->dd_data = NULL;
zfcp_adapter_put(port->adapter);
sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs);
device_unregister(&port->sysfs_device);
/* initialize request counter */
BUG_ON(!zfcp_reqlist_isempty(adapter));
adapter->req_no = 0;
- zfcp_fc_nameserver_init(adapter);
zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL,
ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
* Userspace interface for accessing the
* Access Control Lists / Control File Data Channel
*
- * Copyright IBM Corporation 2008
+ * Copyright IBM Corporation 2008, 2009
*/
#define KMSG_COMPONENT "zfcp"
retval = -ENXIO;
goto free_buffer;
}
+ zfcp_adapter_get(adapter);
retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
data_user->control_file);
/* logical unit status */
#define ZFCP_STATUS_UNIT_SHARED 0x00000004
#define ZFCP_STATUS_UNIT_READONLY 0x00000008
-#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020
/* FSF request status (this does not have a common part) */
#define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002
struct zfcp_erp_action erp_action; /* pending error recovery */
atomic_t erp_counter;
struct zfcp_latencies latencies;
+ struct work_struct scsi_work;
};
/* FSF request */
zfcp_qdio_close(adapter);
zfcp_fsf_req_dismiss_all(adapter);
adapter->fsf_req_seq_no = 0;
+ zfcp_fc_wka_port_force_offline(&adapter->nsp);
/* all ports and units are closed */
zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL,
ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
}
}
-struct zfcp_erp_add_work {
- struct zfcp_unit *unit;
- struct work_struct work;
-};
-
-static void zfcp_erp_scsi_scan(struct work_struct *work)
-{
- struct zfcp_erp_add_work *p =
- container_of(work, struct zfcp_erp_add_work, work);
- struct zfcp_unit *unit = p->unit;
- struct fc_rport *rport = unit->port->rport;
-
- if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
- scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
- scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
- atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- zfcp_unit_put(unit);
- wake_up(&unit->port->adapter->erp_done_wqh);
- kfree(p);
-}
-
-static void zfcp_erp_schedule_work(struct zfcp_unit *unit)
-{
- struct zfcp_erp_add_work *p;
-
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (!p) {
- dev_err(&unit->port->adapter->ccw_device->dev,
- "Registering unit 0x%016Lx on port 0x%016Lx failed\n",
- (unsigned long long)unit->fcp_lun,
- (unsigned long long)unit->port->wwpn);
- return;
- }
-
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- INIT_WORK(&p->work, zfcp_erp_scsi_scan);
- p->unit = unit;
- if (!queue_work(zfcp_data.work_queue, &p->work))
- zfcp_unit_put(unit);
-}
-
static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
{
struct zfcp_adapter *adapter = act->adapter;
switch (act->action) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- flush_work(&port->rport_work);
if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
- if (!(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING))
- zfcp_erp_schedule_work(unit);
+ zfcp_unit_get(unit);
+ if (scsi_queue_work(unit->port->adapter->scsi_host,
+ &unit->scsi_work) <= 0)
+ zfcp_unit_put(unit);
}
zfcp_unit_put(unit);
break;
while (!(atomic_read(&adapter->status) &
ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) {
+
+ zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
+ ignore = down_interruptible(&adapter->erp_ready_sem);
+ zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
+
write_lock_irqsave(&adapter->erp_lock, flags);
next = adapter->erp_ready_head.next;
write_unlock_irqrestore(&adapter->erp_lock, flags);
if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED)
zfcp_erp_wakeup(adapter);
}
-
- zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
- ignore = down_interruptible(&adapter->erp_ready_sem);
- zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
}
atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status);
extern void zfcp_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
extern void zfcp_fc_nameserver_init(struct zfcp_adapter *);
+extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *);
extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *);
+extern void zfcp_scsi_scan(struct work_struct *);
/* zfcp_sysfs.c */
extern struct attribute_group zfcp_sysfs_unit_attrs;
struct zfcp_wka_port *wka_port =
container_of(dw, struct zfcp_wka_port, work);
- /* Don't wait forvever. If the wka_port is too busy take it offline
- through a new call later */
- if (!wait_event_timeout(wka_port->completion_wq,
- atomic_read(&wka_port->refcount) == 0,
- HZ >> 1))
- return;
-
mutex_lock(&wka_port->mutex);
if ((atomic_read(&wka_port->refcount) != 0) ||
(wka_port->status != ZFCP_WKA_PORT_ONLINE))
INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline);
}
+void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka)
+{
+ cancel_delayed_work_sync(&wka->work);
+ mutex_lock(&wka->mutex);
+ wka->status = ZFCP_WKA_PORT_OFFLINE;
+ mutex_unlock(&wka->mutex);
+}
+
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
if (adisc->els.status) {
/* request rejected or timed out */
- zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL);
+ zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
+ "fcadh_1", NULL);
goto out;
}
container_of(work, struct zfcp_port, test_link_work);
int retval;
- if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) {
- zfcp_port_put(port);
- return; /* port erp is running and will update rport status */
- }
-
zfcp_port_get(port);
port->rport_task = RPORT_DEL;
zfcp_scsi_rport_work(&port->rport_work);
{
struct zfcp_adapter *adapter = port->adapter;
+ if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC))
+ return;
+
atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status);
if ((port->supported_classes != 0) ||
if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
continue;
port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
- if (port) {
- zfcp_port_get(port);
+ if (port)
continue;
- }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_COMMON_NOESC, d_id);
max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES;
max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE;
- if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
+ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
+ fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
return 0;
ret = zfcp_wka_port_get(&adapter->nsp);
struct fsf_link_down_info *link_down)
{
struct zfcp_adapter *adapter = req->adapter;
+ unsigned long flags;
if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
return;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
+
+ read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_scsi_schedule_rports_block(adapter);
+ read_unlock_irqrestore(&zfcp_data.config_lock, flags);
if (!link_down)
goto out;
}
}
-static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
- __releases(&adapter->req_q_lock)
- __acquires(&adapter->req_q_lock)
+static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter)
{
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- long ret;
- if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE)
- return -EIO;
- if (atomic_read(&req_q->count) > 0)
- return 0;
+ spin_lock_bh(&adapter->req_q_lock);
+ if (atomic_read(&req_q->count))
+ return 1;
+ spin_unlock_bh(&adapter->req_q_lock);
+ return 0;
+}
+
+static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
+{
+ long ret;
- atomic_dec(&req_q->count);
spin_unlock_bh(&adapter->req_q_lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
- atomic_read(&req_q->count) >= 0,
- 5 * HZ);
- spin_lock_bh(&adapter->req_q_lock);
- atomic_inc(&req_q->count);
-
+ zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
if (!ret)
atomic_inc(&adapter->qdio_outb_full);
+
+ spin_lock_bh(&adapter->req_q_lock);
return -EIO;
}
static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
- unsigned long flags;
- int idx;
+ unsigned long flags;
+ int idx;
+ int with_qtcb = (req->qtcb != NULL);
/* put allocated FSF request into hash table */
spin_lock_irqsave(&adapter->req_list_lock, flags);
}
/* Don't increase for unsolicited status */
- if (req->qtcb)
+ if (with_qtcb)
adapter->fsf_req_seq_no++;
adapter->req_no++;
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
sbale = zfcp_qdio_sbale_req(req);
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
+ return retval;
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
return retval;
}
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
if (data)
req->handler = zfcp_fsf_exchange_port_data_handler;
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
+
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
return retval;
+
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
+ return retval;
}
static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req)
{
- if (req->qtcb->header.fsf_status != FSF_GOOD)
- req->status |= ZFCP_STATUS_FSFREQ_ERROR;
}
/**
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
old_req_id);
- return SUCCESS;
+ return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
*/
static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
write_lock_irq(&zfcp_data.config_lock);
- port->rport = NULL;
+ port = rport->dd_data;
+ if (port)
+ port->rport = NULL;
write_unlock_irq(&zfcp_data.config_lock);
}
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
+
+ write_lock_irq(&zfcp_data.config_lock);
+ port = rport->dd_data;
+ if (port)
+ zfcp_port_get(port);
+ write_unlock_irq(&zfcp_data.config_lock);
- zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ if (port) {
+ zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ zfcp_port_put(port);
+ }
}
static void zfcp_scsi_rport_register(struct zfcp_port *port)
static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
- if (port->rport)
- fc_remote_port_delete(port->rport);
+ struct fc_rport *rport = port->rport;
+
+ if (rport)
+ fc_remote_port_delete(rport);
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
}
+void zfcp_scsi_scan(struct work_struct *work)
+{
+ struct zfcp_unit *unit = container_of(work, struct zfcp_unit,
+ scsi_work);
+ struct fc_rport *rport;
+
+ flush_work(&unit->port->rport_work);
+ rport = unit->port->rport;
+
+ if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+ scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+ scsilun_to_int((struct scsi_lun *)
+ &unit->fcp_lun), 0);
+
+ zfcp_unit_put(unit);
+}
+
struct fc_function_template zfcp_transport_functions = {
.show_starget_port_id = 1,
.show_starget_port_name = 1,
write_lock_irq(&zfcp_data.config_lock);
unit = zfcp_get_unit_by_lun(port, fcp_lun);
- if (unit && (atomic_read(&unit->refcount) == 0)) {
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
- list_move(&unit->list, &unit_remove_lh);
- } else
- unit = NULL;
+ if (unit) {
+ write_unlock_irq(&zfcp_data.config_lock);
+ /* wait for possible timeout during SCSI probe */
+ flush_work(&unit->scsi_work);
+ write_lock_irq(&zfcp_data.config_lock);
+
+ if (atomic_read(&unit->refcount) == 0) {
+ zfcp_unit_get(unit);
+ atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
+ &unit->status);
+ list_move(&unit->list, &unit_remove_lh);
+ } else {
+ unit = NULL;
+ }
+ }
write_unlock_irq(&zfcp_data.config_lock);
a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
-1, NULL, 0);
if (IS_ERR(a4000t_scsi_device)) {
- platform_driver_register(&a4000t_scsi_driver);
+ platform_driver_unregister(&a4000t_scsi_driver);
return PTR_ERR(a4000t_scsi_device);
}
#include "cxgb3i_offload.h"
#include "cxgb3i_ddp.h"
-#define CXGB3I_SCSI_QDEPTH_DFLT 128
+#define CXGB3I_SCSI_HOST_QDEPTH 1024
#define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN
#define CXGB3I_MAX_LUN 512
#define ISCSI_PDU_NONPAYLOAD_MAX \
}
static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp,
- int start, int max, int count,
+ unsigned int start, unsigned int max,
+ unsigned int count,
struct cxgb3i_gather_list *gl)
{
- unsigned int i, j;
+ unsigned int i, j, k;
+ /* not enough entries */
+ if ((max - start) < count)
+ return -EBUSY;
+
+ max -= count;
spin_lock(&ddp->map_lock);
- for (i = start; i <= max;) {
- for (j = 0; j < count; j++) {
- if (ddp->gl_map[i + j])
+ for (i = start; i < max;) {
+ for (j = 0, k = i; j < count; j++, k++) {
+ if (ddp->gl_map[k])
break;
}
if (j == count) {
- for (j = 0; j < count; j++)
- ddp->gl_map[i + j] = gl;
+ for (j = 0, k = i; j < count; j++, k++)
+ ddp->gl_map[k] = gl;
spin_unlock(&ddp->map_lock);
return i;
}
struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
struct pagepod_hdr hdr;
unsigned int npods;
- int idx = -1, idx_max;
+ int idx = -1;
int err = -ENOMEM;
u32 sw_tag = *tagp;
u32 tag;
}
npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT;
- idx_max = ddp->nppods - npods + 1;
if (ddp->idx_last == ddp->nppods)
- idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl);
+ idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl);
else {
idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1,
- idx_max, npods, gl);
- if (idx < 0 && ddp->idx_last >= npods)
+ ddp->nppods, npods, gl);
+ if (idx < 0 && ddp->idx_last >= npods) {
idx = ddp_find_unused_entries(ddp, 0,
- ddp->idx_last - npods + 1,
+ min(ddp->idx_last + npods, ddp->nppods),
npods, gl);
+ }
}
if (idx < 0) {
ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n",
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
+ .can_queue = CXGB3I_SCSI_HOST_QDEPTH,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
- .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT,
+ .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler = iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.this_id = -1,
};
c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
c3cn, c3cn->write_seq, c3cn->snd_una,
cxgb3_snd_win);
- err = -EAGAIN;
+ err = -ENOBUFS;
goto out_err;
}
out_err:
if (copied == 0 && err == -EPIPE)
copied = c3cn->err ? c3cn->err : -EPIPE;
+ else
+ copied = err;
goto done;
}
return 0;
}
- if (err < 0 && err != -EAGAIN) {
- kfree_skb(skb);
- cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
- task->itt, skb, skb->len, skb->data_len, err);
- iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
- iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ if (err == -EAGAIN || err == -ENOBUFS) {
+ /* reset skb to send when we are called again */
+ tdata->skb = skb;
return err;
}
- /* reset skb to send when we are called again */
- tdata->skb = skb;
- return -EAGAIN;
+
+ kfree_skb(skb);
+ cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
+ task->itt, skb, skb->len, skb->data_len, err);
+ iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
+ iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ return err;
}
int cxgb3i_pdu_init(void)
DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
-/* Function Prototyes */
+/* Function Prototypes */
static int fcoe_reset(struct Scsi_Host *shost);
static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
static int fcoe_rcv(struct sk_buff *, struct net_device *,
/**
* fcoe_lport_config() - sets up the fc_lport
* @lp: ptr to the fc_lport
- * @shost: ptr to the parent scsi host
*
* Returns: 0 for success
*/
rtnl_lock();
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+ dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
/*
dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
- /* Free the per-CPU revieve threads */
+ /* Free the per-CPU receive threads */
fcoe_percpu_clean(lp);
/* Free existing skbs */
}
#else
/*
- * This a non-SMP scenario where the singluar Rx thread is
+ * This a non-SMP scenario where the singular Rx thread is
* being removed. Free all skbs and stop the thread.
*/
spin_lock_bh(&p->fcoe_rx_list.lock);
* @skb: the receive skb
* @dev: associated net device
* @ptype: context
- * @odldev: last device
+ * @olddev: last device
*
* this function will receive the packet and build fc frame and pass it up
*
kfree_skb(skb);
return -1;
}
-EXPORT_SYMBOL_GPL(fcoe_rcv);
/**
* fcoe_start_io() - pass to netdev to start xmit for fcoe
}
/**
- * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof
* @skb: the skb to be xmitted
* @tlen: total len
*
/**
* fcoe_fc_crc() - calculates FC CRC in this fcoe skb
- * @fp: the fc_frame containg data to be checksummed
+ * @fp: the fc_frame containing data to be checksummed
*
* This uses crc32() to calculate the crc for fc frame
* Return : 32 bit crc
wlen = skb->len / FCOE_WORD_TO_BYTE;
if (!lp->link_up) {
- kfree(skb);
+ kfree_skb(skb);
return 0;
}
cp = NULL;
}
- /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */
+ /* adjust skb network/transport offsets to match mac/fcoe/fc */
skb_push(skb, elen + hlen);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_xmit);
/**
* fcoe_percpu_receive_thread() - recv thread per cpu
/**
- * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
+ * fcoe_check_wait_queue() - attempt to clear the transmit backlog
+ * @lp: the fc_lport
*
* This empties the wait_queue, dequeue the head of the wait_queue queue
* and calls fcoe_start_io() for each packet, if all skb have been
* transmitted, return qlen or -1 if a error occurs, then restore
- * wait_queue and try again later.
+ * wait_queue and try again later.
*
* The wait_queue is used when the skb transmit fails. skb will go
- * in the wait_queue which will be emptied by the time function OR
+ * in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
*
* Returns: 0 for success
*/
static void fcoe_dev_setup()
{
- /*
- * here setup a interface specific wd time to
- * monitor the link state
- */
register_netdevice_notifier(&fcoe_notifier);
}
/**
* fcoe_if_to_netdev() - parse a name buffer to get netdev
- * @ifname: fixed array for output parsed ifname
* @buffer: incoming buffer to be copied
*
- * Returns: NULL or ptr to netdeive
+ * Returns: NULL or ptr to net_device
*/
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
}
/**
- * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev
* @netdev: the target netdev
*
* Returns: ptr to the struct module, NULL for failure
* Holds the Ethernet driver module by try_module_get() for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_get(const struct net_device *netdev)
{
* Releases the Ethernet driver module by module_put for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_put(const struct net_device *netdev)
{
/**
* fcoe_destroy() - handles the destroy from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
/**
* fcoe_create() - Handles the create call from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
return rc;
}
-EXPORT_SYMBOL_GPL(fcoe_link_ok);
/**
* fcoe_percpu_clean() - Clear the pending skbs for an lport
spin_unlock_bh(&pp->fcoe_rx_list.lock);
}
}
-EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
/**
* fcoe_clean_pending_queue() - Dequeue a skb and free it
}
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
}
-EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
* fcoe_reset() - Resets the fcoe
fc_lport_reset(lport);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_reset);
/**
* fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
- * @device: this is currently ptr to net_device
+ * @dev: this is currently ptr to net_device
*
* Returns: NULL or the located fcoe_softc
*/
return (fc) ? fc->ctlr.lp : NULL;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
/**
* fcoe_hostlist_add() - Add a lport to lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be added
*
* Returns: 0 for success
*/
}
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
/**
* fcoe_hostlist_remove() - remove a lport from lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be removed
*
* Returns: 0 for success
*/
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
/**
* fcoe_init() - fcoe module loading initialization
}
/**
- * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller.
+ * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller.
* @fip: FCoE controller.
*
* This is called by FCoE drivers before freeing the &fcoe_ctlr.
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
+ struct ata_port *ap = NULL;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
sdev->allow_restart = 1;
- if (ipr_is_gata(res) && res->sata_port) {
+ if (ipr_is_gata(res) && res->sata_port)
+ ap = res->sata_port->ap;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+ if (ap) {
scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
- ata_sas_slave_configure(sdev, res->sata_port->ap);
- } else {
+ ata_sas_slave_configure(sdev, ap);
+ } else
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
- }
+ return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
if (err) {
- iscsi_conn_failure(conn, err);
+ /* got invalid offset/len */
return -EIO;
}
return 0;
.use_clustering = DISABLE_CLUSTERING,
.slave_alloc = iscsi_sw_tcp_slave_alloc,
.slave_configure = iscsi_sw_tcp_slave_configure,
+ .target_alloc = iscsi_target_alloc,
.proc_name = "iscsi_tcp",
.this_id = -1,
};
lport->tt.rport_logoff(rport);
}
+ list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) {
+ rport = PRIV_TO_RPORT(rdata);
+ lport->tt.rport_logoff(rport);
+ }
+
mutex_unlock(&disc->disc_mutex);
}
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_disc *disc = &lport->disc;
- int found = 0;
FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
rport->port_id);
- if (event == RPORT_EV_CREATED) {
+ switch (event) {
+ case RPORT_EV_CREATED:
if (disc) {
- found = 1;
mutex_lock(&disc->disc_mutex);
list_add_tail(&rdata->peers, &disc->rports);
mutex_unlock(&disc->disc_mutex);
}
+ break;
+ case RPORT_EV_LOGO:
+ case RPORT_EV_FAILED:
+ case RPORT_EV_STOP:
+ mutex_lock(&disc->disc_mutex);
+ mutex_lock(&rdata->rp_mutex);
+ if (rdata->trans_state == FC_PORTSTATE_ROGUE)
+ list_del(&rdata->peers);
+ mutex_unlock(&rdata->rp_mutex);
+ mutex_unlock(&disc->disc_mutex);
+ break;
+ default:
+ break;
}
- if (!found)
- FC_DEBUG_DISC("The rport (%6x) is not maintained "
- "by the discovery layer\n", rport->port_id);
}
/**
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->rp_state = RPORT_ST_INIT;
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(rport);
}
}
/**
* fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
+ * Locking Note: This function expects that the disc mutex is locked before
+ * it is called. The discovery callback is then made with the lock released,
+ * and the lock is re-taken before returning from this function
*/
static void fc_disc_done(struct fc_disc *disc)
{
struct fc_lport *lport = disc->lport;
+ enum fc_disc_event event;
FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
fc_host_port_id(lport->host));
- disc->disc_callback(lport, disc->event);
+ event = disc->event;
disc->event = DISC_EV_NONE;
if (disc->requested)
fc_disc_gpn_ft_req(disc);
else
disc->pending = 0;
+
+ mutex_unlock(&disc->disc_mutex);
+ disc->disc_callback(lport, event);
+ mutex_lock(&disc->disc_mutex);
}
/**
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->local_port = lport;
+ list_add_tail(&rdata->peers,
+ &disc->rogue_rports);
lport->tt.rport_login(rport);
} else
FC_DBG("Failed to allocate memory for "
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
*
- * Locking Note: This function expects that the disc_mutex is locked
- * before it is called.
+ * Locking Note: This function is called without disc mutex held, and
+ * should do all its processing with the mutex held
*/
static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
void *disc_arg)
unsigned int len;
int error;
+ mutex_lock(&disc->disc_mutex);
FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
fc_host_port_id(disc->lport->host));
if (IS_ERR(fp)) {
fc_disc_error(disc, fp);
+ mutex_unlock(&disc->disc_mutex);
return;
}
disc->seq_count++;
}
fc_frame_free(fp);
+
+ mutex_unlock(&disc->disc_mutex);
}
/**
static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
{
struct fc_lport *lport;
- struct fc_rport *rport;
struct fc_rport *new_rport;
struct fc_rport_libfc_priv *rdata;
if (dp->ids.port_id == fc_host_port_id(lport->host))
goto out;
- rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
- if (rport)
- fc_disc_del_target(disc, rport);
-
new_rport = lport->tt.rport_create(dp);
if (new_rport) {
rdata = new_rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
kfree(dp);
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(new_rport);
}
return;
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
+ INIT_LIST_HEAD(&disc->rogue_rports);
disc->lport = lport;
disc->delay = FC_DISC_DELAY;
void *arg, u32 timer_msec)
{
enum fc_rctl r_ctl;
- u32 did;
+ u32 did = FC_FID_NONE;
enum fc_fh_type fh_type;
int rc;
static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
- struct fc_lport *lp;
+ struct fc_lport *lport = fsp->lp;
struct fc_frame_header *fh;
struct fcp_txrdy *dd;
u8 r_ctl;
fh = fc_frame_header_get(fp);
r_ctl = fh->fh_r_ctl;
- lp = fsp->lp;
- if (!(lp->state & LPORT_ST_READY))
+ if (!(lport->state & LPORT_ST_READY))
goto out;
if (fc_fcp_lock_pkt(fsp))
goto out;
if (IS_ERR(fp))
fc_fcp_error(fsp, fp);
else if (rc == -ENOMEM)
- fc_fcp_reduce_can_queue(lp);
+ fc_fcp_reduce_can_queue(lport);
}
static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
+ if (lport->dns_rp)
+ lport->tt.rport_logoff(lport->dns_rp);
+ mutex_unlock(&lport->lp_mutex);
+ lport->tt.rport_flush_queue();
+ mutex_lock(&lport->lp_mutex);
fc_lport_enter_logo(lport);
mutex_unlock(&lport->lp_mutex);
cancel_delayed_work_sync(&lport->retry_work);
*/
int fc_lport_destroy(struct fc_lport *lport)
{
+ mutex_lock(&lport->lp_mutex);
+ lport->state = LPORT_ST_NONE;
+ lport->link_up = 0;
lport->tt.frame_send = fc_frame_drop;
+ mutex_unlock(&lport->lp_mutex);
+
lport->tt.fcp_abort_io(lport);
lport->tt.exch_mgr_reset(lport, 0, 0);
return 0;
FC_DEBUG_LPORT("Received a RFT_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RFT_ID) {
FC_DBG("Received a RFT_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
FC_DEBUG_LPORT("Received a RPN_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RPN_ID) {
FC_DBG("Received a RPN_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
if (fh && ct && fh->fh_type == FC_TYPE_CT &&
FC_DEBUG_LPORT("Received a SCR response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_SCR) {
FC_DBG("Received a SCR response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_ready(lport);
FC_DEBUG_LPORT("Received a LOGO response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_LOGO) {
FC_DBG("Received a LOGO response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_reset(lport);
fc_lport_state_enter(lport, LPORT_ST_LOGO);
- /* DNS session should be closed so we can release it here */
- if (lport->dns_rp)
- lport->tt.rport_logoff(lport->dns_rp);
-
fp = fc_frame_alloc(lport, sizeof(*logo));
if (!fp) {
fc_lport_error(lport, fp);
FC_DEBUG_LPORT("Received a FLOGI response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_FLOGI) {
FC_DBG("Received a FLOGI response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
"(%6x).\n", ids.port_id);
event = RPORT_EV_FAILED;
}
+ if (rport->port_id != FC_FID_DIR_SERV)
+ if (rport_ops->event_callback)
+ rport_ops->event_callback(lport, rport,
+ RPORT_EV_FAILED);
put_device(&rport->dev);
rport = new_rport;
rdata = new_rport->dd_data;
int fc_rport_logoff(struct fc_rport *rport)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ struct fc_lport *lport = rdata->local_port;
mutex_lock(&rdata->rp_mutex);
FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
+ " not removing", fc_host_port_id(lport->host),
+ rport->port_id);
+ mutex_unlock(&rdata->rp_mutex);
+ goto out;
+ }
+
fc_rport_enter_logo(rport);
/*
mutex_unlock(&rdata->rp_mutex);
+out:
return 0;
}
case RPORT_ST_PRLI:
case RPORT_ST_LOGO:
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue,
&rdata->event_work);
break;
struct fc_rport *rport = rp_arg;
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- struct fc_els_flogi *plp;
+ struct fc_els_flogi *plp = NULL;
unsigned int tov;
u16 csp_seq;
u16 cssp_seq;
FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_DBG("Received a PLOGI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_DBG("Received a PRLI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_LOGO) {
FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
fc_rport_enter_rtv(rport);
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_RTV) {
FC_DBG("Received a RTV response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
default:
FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
"state %d\n", sid, rdata->rp_state);
+ fc_frame_free(fp);
+ return;
break;
}
reason = ELS_RJT_NONE;
break;
default:
+ fc_frame_free(rx_fp);
+ return;
break;
}
len = fr_len(rx_fp) - sizeof(*fh);
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rjt_data.fp = NULL;
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_NONE;
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
}
EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
+int iscsi_target_alloc(struct scsi_target *starget)
+{
+ struct iscsi_cls_session *cls_session = starget_to_session(starget);
+ struct iscsi_session *session = cls_session->dd_data;
+
+ starget->can_queue = session->scsi_cmds_max;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iscsi_target_alloc);
+
void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *session = cls_session->dd_data;
rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent,
r2t->data_count);
- if (rc)
+ if (rc) {
+ iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED);
return rc;
+ }
+
r2t->sent += r2t->data_count;
goto flush;
}
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
+#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
return;
}
-
#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
/**
- * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules.
+ * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
* @incr: integer to convert.
* @hdw: ascii string holding converted integer plus a string terminator.
*
}
/**
- * lpfc_drvr_version_show: Return the Emulex driver string with version number.
+ * lpfc_drvr_version_show - Return the Emulex driver string with version number
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
}
/**
- * lpfc_info_show: Return some pci info about the host in ascii.
+ * lpfc_info_show - Return some pci info about the host in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text from lpfc_info().
}
/**
- * lpfc_serialnum_show: Return the hba serial number in ascii.
+ * lpfc_serialnum_show - Return the hba serial number in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text serial number.
}
/**
- * lpfc_temp_sensor_show: Return the temperature sensor level.
+ * lpfc_temp_sensor_show - Return the temperature sensor level
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted support level.
}
/**
- * lpfc_modeldesc_show: Return the model description of the hba.
+ * lpfc_modeldesc_show - Return the model description of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model description.
}
/**
- * lpfc_modelname_show: Return the model name of the hba.
+ * lpfc_modelname_show - Return the model name of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model name.
}
/**
- * lpfc_programtype_show: Return the program type of the hba.
+ * lpfc_programtype_show - Return the program type of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag.
+ * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the Menlo Maintenance sli flag.
}
/**
- * lpfc_vportnum_show: Return the port number in ascii of the hba.
+ * lpfc_vportnum_show - Return the port number in ascii of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains scsi vpd program type.
}
/**
- * lpfc_fwrev_show: Return the firmware rev running in the hba.
+ * lpfc_fwrev_show - Return the firmware rev running in the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_hdw_show: Return the jedec information about the hba.
+ * lpfc_hdw_show - Return the jedec information about the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_option_rom_version_show: Return the adapter ROM FCode version.
+ * lpfc_option_rom_version_show - Return the adapter ROM FCode version
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the ROM and FCode ascii strings.
}
/**
- * lpfc_state_show: Return the link state of the port.
+ * lpfc_state_show - Return the link state of the port
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains text describing the state of the link.
}
/**
- * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports.
+ * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the sum of fc mapped and unmapped.
}
/**
- * lpfc_issue_lip: Misnomer, name carried over from long ago.
+ * lpfc_issue_lip - Misnomer, name carried over from long ago
* @shost: Scsi_Host pointer.
*
* Description:
}
/**
- * lpfc_do_offline: Issues a mailbox command to bring the link down.
+ * lpfc_do_offline - Issues a mailbox command to bring the link down
* @phba: lpfc_hba pointer.
* @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
*
* Assumes any error from lpfc_do_offline() will be negative.
* Can wait up to 5 seconds for the port ring buffers count
* to reach zero, prints a warning if it is not zero and continues.
- * lpfc_workq_post_event() returns a non-zero return coce if call fails.
+ * lpfc_workq_post_event() returns a non-zero return code if call fails.
*
* Returns:
* -EIO error posting the event
}
/**
- * lpfc_selective_reset: Offline then onlines the port.
+ * lpfc_selective_reset - Offline then onlines the port
* @phba: lpfc_hba pointer.
*
* Description:
}
/**
- * lpfc_issue_reset: Selectively resets an adapter.
+ * lpfc_issue_reset - Selectively resets an adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string "selective".
}
/**
- * lpfc_nport_evt_cnt_show: Return the number of nport events.
+ * lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the ascii number of nport events.
}
/**
- * lpfc_board_mode_show: Return the state of the board.
+ * lpfc_board_mode_show - Return the state of the board
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the state of the adapter.
}
/**
- * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state.
+ * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing one of the strings "online", "offline", "warm" or "error".
}
/**
- * lpfc_get_hba_info: Return various bits of informaton about the adapter.
+ * lpfc_get_hba_info - Return various bits of informaton about the adapter
* @phba: pointer to the adapter structure.
- * @mxri max xri count.
- * @axri available xri count.
- * @mrpi max rpi count.
- * @arpi available rpi count.
- * @mvpi max vpi count.
- * @avpi available vpi count.
+ * @mxri: max xri count.
+ * @axri: available xri count.
+ * @mrpi: max rpi count.
+ * @arpi: available rpi count.
+ * @mvpi: max vpi count.
+ * @avpi: available vpi count.
*
* Description:
* If an integer pointer for an count is not null then the value for the
}
/**
- * lpfc_max_rpi_show: Return maximum rpi.
+ * lpfc_max_rpi_show - Return maximum rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum rpi count in decimal or "Unknown".
}
/**
- * lpfc_used_rpi_show: Return maximum rpi minus available rpi.
+ * lpfc_used_rpi_show - Return maximum rpi minus available rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the used rpi count in decimal or "Unknown".
}
/**
- * lpfc_max_xri_show: Return maximum xri.
+ * lpfc_max_xri_show - Return maximum xri
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum xri count in decimal or "Unknown".
}
/**
- * lpfc_used_xri_show: Return maximum xpi minus the available xpi.
+ * lpfc_used_xri_show - Return maximum xpi minus the available xpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used xri count in decimal or "Unknown".
}
/**
- * lpfc_max_vpi_show: Return maximum vpi.
+ * lpfc_max_vpi_show - Return maximum vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum vpi count in decimal or "Unknown".
}
/**
- * lpfc_used_vpi_show: Return maximum vpi minus the available vpi.
+ * lpfc_used_vpi_show - Return maximum vpi minus the available vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used vpi count in decimal or "Unknown".
}
/**
- * lpfc_npiv_info_show: Return text about NPIV support for the adapter.
+ * lpfc_npiv_info_show - Return text about NPIV support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: text that must be interpreted to determine if npiv is supported.
}
/**
- * lpfc_poll_show: Return text about poll support for the adapter.
+ * lpfc_poll_show - Return text about poll support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the cfg_poll in hex.
}
/**
- * lpfc_poll_store: Set the value of cfg_poll for the adapter.
+ * lpfc_poll_store - Set the value of cfg_poll for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
}
/**
- * lpfc_param_show: Return a cfg attribute value in decimal.
+ * lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_hex_show: Return a cfg attribute value in hex.
+ * lpfc_param_hex_show - Return a cfg attribute value in hex
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_param_init: Intializes a cfg attribute.
+ * lpfc_param_init - Intializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_set: Set a cfg attribute value.
+ * lpfc_param_set - Set a cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_store: Set a vport attribute value.
+ * lpfc_param_store - Set a vport attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_show: Return decimal formatted cfg attribute value.
+ * lpfc_vport_param_show - Return decimal formatted cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_hex_show: Return hex formatted attribute value.
+ * lpfc_vport_param_hex_show - Return hex formatted attribute value
*
* Description:
* Macro that given an attr e.g.
* hba_queue_depth expands into a function with the name
* lpfc_hba_queue_depth_show
*
- * lpfc_##attr##_show: prints the attribute value in hexidecimal.
+ * lpfc_##attr##_show: prints the attribute value in hexadecimal.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: length of formatted string.
**/
}
/**
- * lpfc_vport_param_init: Initialize a vport cfg attribute.
+ * lpfc_vport_param_init - Initialize a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_set: Set a vport cfg attribute.
+ * lpfc_vport_param_set - Set a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_store: Set a vport attribute.
+ * lpfc_vport_param_store - Set a vport attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
/**
- * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid.
+ * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string lpfc_soft_wwn_key.
lpfc_soft_wwn_enable_store);
/**
- * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter.
+ * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwpn in hexidecimal.
+ * @buf: on return contains the wwpn in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_soft_wwpn_store: Set the ww port name of the adapter.
+ * lpfc_soft_wwpn_store - Set the ww port name of the adapter
* @dev class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: contains the wwpn in hexidecimal.
+ * @buf: contains the wwpn in hexadecimal.
* @count: number of wwpn bytes in buf
*
* Returns:
lpfc_soft_wwpn_show, lpfc_soft_wwpn_store);
/**
- * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter.
+ * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwnn in hexidecimal.
+ * @buf: on return contains the wwnn in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_soft_wwnn_store: sets the ww node name of the adapter.
+ * lpfc_soft_wwnn_store - sets the ww node name of the adapter
* @cdev: class device that is converted into a Scsi_host.
- * @buf: contains the ww node name in hexidecimal.
+ * @buf: contains the ww node name in hexadecimal.
* @count: number of wwnn bytes in buf.
*
* Returns:
"for a device to come back");
/**
- * lpfc_nodev_tmo_show: Return the hba dev loss timeout value.
+ * lpfc_nodev_tmo_show - Return the hba dev loss timeout value
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the dev loss timeout in decimal.
}
/**
- * lpfc_nodev_tmo_init: Set the hba nodev timeout value.
+ * lpfc_nodev_tmo_init - Set the hba nodev timeout value
* @vport: lpfc vport structure pointer.
* @val: contains the nodev timeout value.
*
}
/**
- * lpfc_update_rport_devloss_tmo: Update dev loss tmo value.
+ * lpfc_update_rport_devloss_tmo - Update dev loss tmo value
* @vport: lpfc vport structure pointer.
*
* Description:
}
/**
- * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values.
+ * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
lpfc_vport_param_show(devloss_tmo)
/**
- * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit.
+ * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
lpfc_vport_param_show(restrict_login);
/**
- * lpfc_restrict_login_init: Set the vport restrict login flag.
+ * lpfc_restrict_login_init - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
}
/**
- * lpfc_restrict_login_set: Set the vport restrict login flag.
+ * lpfc_restrict_login_set - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
*/
/**
- * lpfc_topology_set: Set the adapters topology field.
+ * lpfc_topology_set - Set the adapters topology field
* @phba: lpfc_hba pointer.
* @val: topology value.
*
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_topology_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_topology_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (val >= 0 && val <= 6) {
prev_val = phba->cfg_topology;
phba->cfg_topology = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_topology = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0467 lpfc_topology attribute cannot be set to %d, "
MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
lpfc_param_show(topology)
lpfc_param_init(topology, 0, 0, 6)
-lpfc_param_store(topology)
static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
lpfc_topology_show, lpfc_topology_store);
/**
- * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl
- * sysfs file.
+ * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device.
* @buf: Data buffer.
* @count: Size of the data buffer.
unsigned long base, step, bucket_type;
if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
- if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN)
+ if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
return -EINVAL;
strcpy(bucket_data, buf);
/**
- * lpfc_stat_data_ctrl_show: Read callback function for
- * lpfc_stat_data_ctrl sysfs file.
+ * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device object.
* @buf: Data buffer.
*
/**
- * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data
- * sysfs attribute.
+ * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute
* @kobj: Pointer to the kernel object
* @bin_attr: Attribute object
* @buff: Buffer pointer
*/
/**
- * lpfc_link_speed_set: Set the adapters link speed.
+ * lpfc_link_speed_set - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
return -EINVAL;
- if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ if ((val >= 0 && val <= 8)
&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_link_speed = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
lpfc_param_show(link_speed)
/**
- * lpfc_link_speed_init: Set the adapters link speed.
+ * lpfc_link_speed_init - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
return -EINVAL;
}
-lpfc_param_store(link_speed)
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
lpfc_link_speed_show, lpfc_link_speed_store);
/*
- * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
* This value can be set to values between 64 and 256. The default value is
* 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
* will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
};
/**
- * sysfs_ctlreg_write: Write method for writing to ctlreg.
+ * sysfs_ctlreg_write - Write method for writing to ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to the adapter IOREG space.
}
/**
- * sysfs_ctlreg_read: Read method for reading from ctlreg.
+ * sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: if succesful contains the data from the adapter IOREG space.
};
/**
- * sysfs_mbox_idle: frees the sysfs mailbox.
+ * sysfs_mbox_idle - frees the sysfs mailbox
* @phba: lpfc_hba pointer
**/
static void
}
/**
- * sysfs_mbox_write: Write method for writing information via mbox.
+ * sysfs_mbox_write - Write method for writing information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to sysfs mbox.
}
/**
- * sysfs_mbox_read: Read method for reading information via mbox.
+ * sysfs_mbox_read - Read method for reading information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be read from sysfs mbox.
};
/**
- * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries.
+ * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
*
* Return codes:
}
/**
- * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries.
+ * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
**/
void
*/
/**
- * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id.
+ * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_port_type: Set the value of the scsi host port type.
+ * lpfc_get_host_port_type - Set the value of the scsi host port type
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_port_state: Set the value of the scsi host port state.
+ * lpfc_get_host_port_state - Set the value of the scsi host port state
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_speed: Set the value of the scsi host speed.
+ * lpfc_get_host_speed - Set the value of the scsi host speed
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name.
+ * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_stats: Return statistical information about the adapter.
+ * lpfc_get_stats - Return statistical information about the adapter
* @shost: kernel scsi host pointer.
*
* Notes:
}
/**
- * lpfc_reset_stats: Copy the adapter link stats information.
+ * lpfc_reset_stats - Copy the adapter link stats information
* @shost: kernel scsi host pointer.
**/
static void
*/
/**
- * lpfc_get_node_by_target: Return the nodelist for a target.
+ * lpfc_get_node_by_target - Return the nodelist for a target
* @starget: kernel scsi target pointer.
*
* Returns:
}
/**
- * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1.
+ * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
* @starget: kernel scsi target pointer.
**/
static void
}
/**
- * lpfc_get_starget_node_name: Set the target node name.
+ * lpfc_get_starget_node_name - Set the target node name
* @starget: kernel scsi target pointer.
*
* Description: Set the target node name to the ndlp node name wwn or zero.
}
/**
- * lpfc_get_starget_port_name: Set the target port name.
+ * lpfc_get_starget_port_name - Set the target port name
* @starget: kernel scsi target pointer.
*
* Description: set the target port name to the ndlp port name wwn or zero.
}
/**
- * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo.
+ * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
* @rport: fc rport address.
* @timeout: new value for dev loss tmo.
*
}
/**
- * lpfc_rport_show_function: Return rport target information.
+ * lpfc_rport_show_function - Return rport target information
*
* Description:
* Macro that uses field to generate a function with the name lpfc_show_rport_
static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
/**
- * lpfc_set_vport_symbolic_name: Set the vport's symbolic name.
+ * lpfc_set_vport_symbolic_name - Set the vport's symbolic name
* @fc_vport: The fc_vport who's symbolic name has been changed.
*
* Description:
};
/**
- * lpfc_get_cfgparam: Used during probe_one to init the adapter structure.
+ * lpfc_get_cfgparam - Used during probe_one to init the adapter structure
* @phba: lpfc_hba pointer.
**/
void
}
/**
- * lpfc_get_vport_cfgparam: Used during port create, init the vport structure.
+ * lpfc_get_vport_cfgparam - Used during port create, init the vport structure
* @vport: lpfc_vport pointer.
**/
void
struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
+void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
+ uint32_t);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
#include "lpfc_debugfs.h"
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/**
+/*
* debugfs interface
*
* To access this interface the user should:
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
"Set debugfs slow ring trace depth");
-int lpfc_debugfs_mask_disc_trc;
+static int lpfc_debugfs_mask_disc_trc;
module_param(lpfc_debugfs_mask_disc_trc, int, 0);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
"Set debugfs discovery trace mask");
static unsigned long lpfc_debugfs_start_time = 0L;
/**
- * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer.
+ * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
* @vport: The vport to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
}
/**
- * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer.
+ * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
* @phba: The HBA to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
static int lpfc_debugfs_last_hbq = -1;
/**
- * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer.
+ * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
* @phba: The HBA to gather host buffer info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
static int lpfc_debugfs_last_hba_slim_off;
/**
- * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer.
+ * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
* @phba: The HBA to gather SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
len += snprintf(buf+len, size-len, "HBA SLIM\n");
lpfc_memcpy_from_slim(buffer,
- ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off,
- 1024);
+ phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);
ptr = (uint32_t *)&buffer[0];
off = lpfc_debugfs_last_hba_slim_off;
}
/**
- * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer.
+ * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
* @phba: The HBA to gather Host SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
}
/**
- * lpfc_debugfs_nodelist_data - Dump target node list to a buffer.
+ * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
* @vport: The vport to gather target node info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
#endif
/**
- * lpfc_debugfs_disc_trc - Store discovery trace log.
+ * lpfc_debugfs_disc_trc - Store discovery trace log
* @vport: The vport to associate this trace string with for retrieval.
* @mask: Log entry classification.
* @fmt: Format string to be displayed when dumping the log.
}
/**
- * lpfc_debugfs_slow_ring_trc - Store slow ring trace log.
+ * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
* @phba: The phba to associate this trace string with for retrieval.
* @fmt: Format string to be displayed when dumping the log.
* @data1: 1st data parameter to be applied to @fmt.
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
- * lpfc_debugfs_disc_trc_open - Open the discovery trace log.
+ * lpfc_debugfs_disc_trc_open - Open the discovery trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log.
+ * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer.
+ * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
/**
- * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file.
+ * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_lseek - Seek through a debugfs file.
+ * lpfc_debugfs_lseek - Seek through a debugfs file
* @file: The file pointer to seek through.
* @off: The offset to seek to or the amount to seek by.
* @whence: Indicates how to seek.
}
/**
- * lpfc_debugfs_read - Read a debugfs file.
+ * lpfc_debugfs_read - Read a debugfs file
* @file: The file pointer to read from.
* @buf: The buffer to copy the data to.
* @nbytes: The number of bytes to read.
}
/**
- * lpfc_debugfs_release - Release the buffer used to store debugfs file data.
+ * lpfc_debugfs_release - Release the buffer used to store debugfs file data
* @inode: The inode pointer that contains a vport pointer. (unused)
* @file: The file pointer that contains the buffer to release.
*
#endif
/**
- * lpfc_debugfs_initialize - Initialize debugfs for a vport.
+ * lpfc_debugfs_initialize - Initialize debugfs for a vport
* @vport: The vport pointer to initialize.
*
* Description:
}
/**
- * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport.
+ * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport
* @vport: The vport pointer to remove from debugfs.
*
* Description:
#define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */
struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
+ struct lpfc_hba *phba;
struct fc_rport *rport; /* Corresponding FC transport
port structure */
struct lpfc_vport *vport;
static int lpfc_max_els_tries = 3;
/**
- * lpfc_els_chk_latt: Check host link attention event for a vport.
+ * lpfc_els_chk_latt - Check host link attention event for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there is an outstanding host link
}
/**
- * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure.
+ * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
* @vport: pointer to a host virtual N_Port data structure.
* @expectRsp: flag indicating whether response is expected.
* @cmdSize: size of the ELS command.
}
/**
- * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport.
+ * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a fabric registration login for a @vport. An
}
/**
- * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port.
+ * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
}
/**
- * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port.
+ * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
}
/**
- * lpfc_cmpl_els_flogi: Completion callback function for flogi.
+ * lpfc_cmpl_els_flogi - Completion callback function for flogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport.
+ * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs.
+ * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
}
/**
- * lpfc_initial_flogi: Issue an initial fabric login for a vport.
+ * lpfc_initial_flogi - Issue an initial fabric login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Login (FLOGI) for the @vport
}
/**
- * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport.
+ * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Discover (FDISC) for the @vport
}
/**
- * lpfc_more_plogi: Check and issue remaining plogis for a vport.
+ * lpfc_more_plogi - Check and issue remaining plogis for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there are more remaining Port Logins
}
/**
- * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp.
+ * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
* @phba: pointer to lpfc hba data structure.
* @prsp: pointer to response IOCB payload.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_end_rscn: Check and handle more rscn for a vport.
+ * lpfc_end_rscn - Check and handle more rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether more Registration State Change
}
/**
- * lpfc_cmpl_els_plogi: Completion callback function for plogi.
+ * lpfc_cmpl_els_plogi - Completion callback function for plogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport.
+ * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @did: destination port identifier.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_prli: Completion callback function for prli.
+ * lpfc_cmpl_els_prli - Completion callback function for prli
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_prli: Issue a prli iocb command for a vport.
+ * lpfc_issue_els_prli - Issue a prli iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_rscn_disc: Perform rscn discovery for a vport.
+ * lpfc_rscn_disc - Perform rscn discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine performs Registration State Change Notification (RSCN)
}
/**
- * lpfc_adisc_done: Complete the adisc phase of discovery.
+ * lpfc_adisc_done - Complete the adisc phase of discovery
* @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
*
* This function is called when the final ADISC is completed during discovery.
}
/**
- * lpfc_more_adisc: Issue more adisc as needed.
+ * lpfc_more_adisc - Issue more adisc as needed
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine determines whether there are more ndlps on a @vport
}
/**
- * lpfc_cmpl_els_adisc: Completion callback function for adisc.
+ * lpfc_cmpl_els_adisc - Completion callback function for adisc
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport.
+ * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_logo: Completion callback function for logo.
+ * lpfc_cmpl_els_logo - Completion callback function for logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_logo: Issue a logo to an node on a vport.
+ * lpfc_issue_els_logo - Issue a logo to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_cmd: Completion callback function for generic els command.
+ * lpfc_cmpl_els_cmd - Completion callback function for generic els command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_scr: Issue a scr to an node on a vport.
+ * lpfc_issue_els_scr - Issue a scr to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_issue_els_farpr: Issue a farp to an node on a vport.
+ * lpfc_issue_els_farpr - Issue a farp to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry.
+ * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry
* @vport: pointer to a host virtual N_Port data structure.
* @nlp: pointer to a node-list data structure.
*
}
/**
- * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer.
+ * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer
* @ptr: holder for the pointer to the timer function associated data (ndlp).
*
* This routine is invoked by the ndlp delayed-function timer to check
}
/**
- * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function.
+ * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function
* @ndlp: pointer to a node-list data structure.
*
* This routine is the worker-thread handler for processing the @ndlp delayed
}
/**
- * lpfc_els_retry: Make retry decision on an els command iocb.
+ * lpfc_els_retry - Make retry decision on an els command iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb.
+ * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb
* @phba: pointer to lpfc hba data structure.
* @buf_ptr1: pointer to the lpfc DMA buffer data structure.
*
}
/**
- * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl.
+ * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl
* @phba: pointer to lpfc hba data structure.
* @buf_ptr: pointer to the lpfc dma buffer data structure.
*
}
/**
- * lpfc_els_free_iocb: Free a command iocb and its associated resources.
+ * lpfc_els_free_iocb - Free a command iocb and its associated resources
* @phba: pointer to lpfc hba data structure.
* @elsiocb: pointer to lpfc els command iocb data structure.
*
}
/**
- * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response.
+ * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd.
+ * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd.
+ * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command.
+ * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @flag: the els command code to be accepted.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command.
+ * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @rejectError:
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd.
+ * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd.
+ * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command.
+ * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @format: rnid command format.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport.
+ * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Address Discover (ADISC) ELS commands to those
}
/**
- * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc.
+ * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Port Login (PLOGI) ELS commands to all the N_Ports
}
/**
- * lpfc_els_flush_rscn: Clean up any rscn activities with a vport.
+ * lpfc_els_flush_rscn - Clean up any rscn activities with a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine cleans up any Registration State Change Notification
}
/**
- * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did.
+ * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did
* @vport: pointer to a host virtual N_Port data structure.
* @did: remote destination port identifier.
*
}
/**
- * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn
+ * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the
}
/**
- * lpfc_send_rscn_event: Send an RSCN event to management application.
+ * lpfc_send_rscn_event - Send an RSCN event to management application
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
*
}
/**
- * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb.
+ * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_handle_rscn: Handle rscn for a vport.
+ * lpfc_els_handle_rscn - Handle rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine handles the Registration State Configuration Notification
}
/**
- * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb.
+ * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb.
+ * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb.
+ * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd.
+ * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_els_rcv_rps: Process an unsolicited rps iocb.
+ * lpfc_els_rcv_rps - Process an unsolicited rps iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command.
+ * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdsize: size of the ELS command.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb.
+ * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_farp: Process an unsolicited farp request els command.
+ * lpfc_els_rcv_farp - Process an unsolicited farp request els command
* @vport: pointer to a virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb.
+ * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_fan: Process an unsolicited fan iocb command.
+ * lpfc_els_rcv_fan - Process an unsolicited fan iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @fan_ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_timeout: Handler funciton to the els timer.
+ * lpfc_els_timeout - Handler funciton to the els timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the ELS timer after timeout. It posts the ELS
}
/**
- * lpfc_els_timeout_handler: Process an els timeout event.
+ * lpfc_els_timeout_handler - Process an els timeout event
* @vport: pointer to a virtual N_Port data structure.
*
* This routine is the actual handler function that processes an ELS timeout
}
/**
- * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport.
+ * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
-
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+ /* Cancell all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return;
}
/**
- * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA.
+ * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
lpfc_sli_issue_abort_iotag(phba, pring, piocb);
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
return;
}
/**
- * lpfc_send_els_failure_event: Posts an ELS command failure event.
+ * lpfc_send_els_failure_event - Posts an ELS command failure event
* @phba: Pointer to hba context object.
* @cmdiocbp: Pointer to command iocb which reported error.
* @rspiocbp: Pointer to response iocb which reported error.
}
/**
- * lpfc_send_els_event: Posts unsolicited els event.
+ * lpfc_send_els_event - Posts unsolicited els event
* @vport: Pointer to vport object.
* @ndlp: Pointer FC node object.
* @cmd: ELS command code.
/**
- * lpfc_els_unsol_buffer: Process an unsolicited event data buffer.
+ * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @vport: pointer to a host virtual N_Port data structure.
}
/**
- * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier.
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: host virtual N_Port identifier.
*
}
/**
- * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring.
+ * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @elsiocb: pointer to lpfc els iocb data structure.
}
/**
- * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr.
+ * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a virtual N_Port data structure.
*
}
/**
- * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport.
+ * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_register_new_vport: Register a new vport with a HBA.
+ * lpfc_register_new_vport - Register a new vport with a HBA
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command.
+ * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_fdisc: Issue a fdisc iocb command.
+ * lpfc_issue_els_fdisc - Issue a fdisc iocb command
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_npiv_logo: Completion function with vport logo.
+ * lpfc_cmpl_els_npiv_logo - Completion function with vport logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_npiv_logo: Issue a logo off a vport.
+ * lpfc_issue_els_npiv_logo - Issue a logo off a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
*
}
/**
- * lpfc_fabric_block_timeout: Handler function to the fabric block timer.
+ * lpfc_fabric_block_timeout - Handler function to the fabric block timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the fabric iocb block timer after
}
/**
- * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list.
+ * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list
* @phba: pointer to lpfc hba data structure.
*
* This routine issues one fabric iocb from the driver internal list to
}
/**
- * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command.
+ * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine unblocks the issuing fabric iocb command. The function
}
/**
- * lpfc_block_fabric_iocbs: Block issuing fabric iocb command.
+ * lpfc_block_fabric_iocbs - Block issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine blocks the issuing fabric iocb for a specified amount of
}
/**
- * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb.
+ * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_fabric_iocb: Issue a fabric iocb command.
+ * lpfc_issue_fabric_iocb - Issue a fabric iocb command
* @phba: pointer to lpfc hba data structure.
* @iocb: pointer to lpfc command iocb data structure.
*
}
/**
- * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list
* @vport: pointer to a virtual N_Port data structure.
*
* This routine aborts all the IOCBs associated with a @vport from the
LIST_HEAD(completions);
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list
* @ndlp: pointer to a node-list data structure.
*
* This routine aborts all the IOCBs associated with an @ndlp from the
void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
- struct lpfc_hba *phba = ndlp->vport->phba;
+ struct lpfc_hba *phba = ndlp->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list.
+ * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the IOCBs currently on the driver internal
void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
{
LIST_HEAD(completions);
- struct lpfc_iocbq *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->fabric_iocb_list, &completions);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
return;
}
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
"rport terminate: sid:x%x did:x%x flg:x%x",
}
/**
- * lpfc_alloc_fast_evt: Allocates data structure for posting event.
+ * lpfc_alloc_fast_evt - Allocates data structure for posting event
* @phba: Pointer to hba context object.
*
* This function is called from the functions which need to post
}
/**
- * lpfc_free_fast_evt: Frees event data structure.
+ * lpfc_free_fast_evt - Frees event data structure
* @phba: Pointer to hba context object.
* @evt: Event object which need to be freed.
*
}
/**
- * lpfc_send_fastpath_evt: Posts events generated from fast path.
+ * lpfc_send_fastpath_evt - Posts events generated from fast path
* @phba: Pointer to hba context object.
* @evtp: Event data structure.
*
NLP_STE_UNUSED_NODE);
}
/**
- * lpfc_initialize_node: Initialize all fields of node object.
+ * lpfc_initialize_node - Initialize all fields of node object
* @vport: Pointer to Virtual Port object.
* @ndlp: Pointer to FC node object.
* @did: FC_ID of the node.
- * This function is always called when node object need to
- * be initialized. It initializes all the fields of the node
- * object.
+ *
+ * This function is always called when node object need to be initialized.
+ * It initializes all the fields of the node object. Although the reference
+ * to phba from @ndlp can be obtained indirectly through it's reference to
+ * @vport, a direct reference to phba is taken here by @ndlp. This is due
+ * to the life-span of the @ndlp might go beyond the existence of @vport as
+ * the final release of ndlp is determined by its reference count. And, the
+ * operation on @ndlp needs the reference to phba.
**/
static inline void
lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
ndlp->nlp_DID = did;
ndlp->vport = vport;
+ ndlp->phba = vport->phba;
ndlp->nlp_sid = NLP_NO_SID;
kref_init(&ndlp->kref);
NLP_INT_NODE_ACT(ndlp);
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *icmd;
uint32_t rpi, i;
lpfc_fabric_abort_nport(ndlp);
}
}
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl)(phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return 0;
}
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
- }
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
+ "1836 Could not issue "
+ "unreg_login(all_rpis) status %d\n", rc);
}
}
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
"1815 Could not issue "
- "unreg_did (default rpis)\n");
- mempool_free(mbox, phba->mbox_mem_pool);
- }
+ "unreg_did (default rpis) status %d\n",
+ rc);
}
}
if (ndlp->nlp_flag & NLP_RCV_PLOGI)
return NULL;
- spin_lock_irq(shost->host_lock);
- ndlp->nlp_flag |= NLP_NPR_2B_DISC;
- spin_unlock_irq(shost->host_lock);
-
/* Since this node is marked for discovery,
* delay timeout is not needed.
*/
lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+ spin_unlock_irq(shost->host_lock);
} else
ndlp = NULL;
} else {
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
static void
lpfc_nlp_remove(ndlp->vport, ndlp);
/* clear the ndlp active flag for all release cases */
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
NLP_CLR_NODE_ACT(ndlp);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
/* free ndlp memory for final ndlp release */
if (NLP_CHK_FREE_REQ(ndlp)) {
kfree(ndlp->lat_data);
- mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool);
+ mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
}
}
* ndlp reference count that is in the process of being
* released.
*/
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
"node put: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
/* Check the ndlp memory free acknowledge flag to avoid the
* possible race condition that kref_put got invoked again
static DEFINE_IDR(lpfc_hba_index);
/**
- * lpfc_config_port_prep: Perform lpfc initialization prior to config port.
+ * lpfc_config_port_prep - Perform lpfc initialization prior to config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization prior to issuing the CONFIG_PORT
}
/**
- * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd.
+ * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
- * command used for getting wake up parameters.
+ * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_port_post: Perform lpfc initialization after config port.
+ * lpfc_config_port_post - Perform lpfc initialization after config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization after the CONFIG_PORT mailbox
lpfc_config_port_post(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
sizeof (struct lpfc_name));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
if (phba->SerialNumber[0] == 0) {
}
/**
- * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset.
+ * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do LPFC uninitialization before the HBA is reset when
}
/**
- * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset.
+ * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *mp, *next_mp;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
LIST_HEAD(completions);
int i;
pring->txcmplq_cnt = 0;
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq,
- list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
lpfc_sli_abort_iocb_ring(phba, pring);
spin_lock_irq(&phba->hbalock);
}
/**
- * lpfc_hb_timeout: The HBA-timer timeout handler.
+ * lpfc_hb_timeout - The HBA-timer timeout handler
* @ptr: unsigned long holds the pointer to lpfc hba data structure.
*
* This is the HBA-timer timeout handler registered to the lpfc driver. When
}
/**
- * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function.
+ * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_hb_timeout_handler: The HBA-timer timeout handler.
+ * lpfc_hb_timeout_handler - The HBA-timer timeout handler
* @phba: pointer to lpfc hba data structure.
*
* This is the actual HBA-timer timeout handler to be invoked by the worker
}
/**
- * lpfc_offline_eratt: Bring lpfc offline on hardware error attention.
+ * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to bring the HBA offline when HBA hardware error
}
/**
- * lpfc_handle_eratt: The HBA hardware error handler.
+ * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the deferred HBA hardware error
+ * conditions. This type of error is indicated by HBA by setting ER1
+ * and another ER bit in the host status register. The driver will
+ * wait until the ER1 bit clears before handling the error condition.
+ **/
+static void
+lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
+{
+ uint32_t old_host_status = phba->work_hs;
+ struct lpfc_sli_ring *pring;
+ struct lpfc_sli *psli = &phba->sli;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0479 Deferred Adapter Hardware Error "
+ "Data: x%x x%x x%x\n",
+ phba->work_hs,
+ phba->work_status[0], phba->work_status[1]);
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+
+
+ /*
+ * Firmware stops when it triggred erratt. That could cause the I/Os
+ * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
+ * SCSI layer retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+
+ /*
+ * There was a firmware error. Take the hba offline and then
+ * attempt to restart it.
+ */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+
+ /* Wait for the ER1 bit to clear.*/
+ while (phba->work_hs & HS_FFER1) {
+ msleep(100);
+ phba->work_hs = readl(phba->HSregaddr);
+ /* If driver is unloading let the worker thread continue */
+ if (phba->pport->load_flag & FC_UNLOADING) {
+ phba->work_hs = 0;
+ break;
+ }
+ }
+
+ /*
+ * This is to ptrotect against a race condition in which
+ * first write to the host attention register clear the
+ * host status register.
+ */
+ if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
+ phba->work_hs = old_host_status & ~HS_FFER1;
+
+ phba->hba_flag &= ~DEFER_ERATT;
+ phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+ phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+}
+
+/**
+ * lpfc_handle_eratt - The HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
(char *) &board_event,
LPFC_NL_VENDOR_ID);
+ if (phba->hba_flag & DEFER_ERATT)
+ lpfc_handle_deferred_eratt(phba);
+
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
}
/**
- * lpfc_handle_latt: The HBA link event handler.
+ * lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked from the worker thread to handle a HBA host
}
/**
- * lpfc_parse_vpd: Parse VPD (Vital Product Data).
+ * lpfc_parse_vpd - Parse VPD (Vital Product Data)
* @phba: pointer to lpfc hba data structure.
* @vpd: pointer to the vital product data.
* @len: length of the vital product data in bytes.
}
/**
- * lpfc_get_hba_model_desc: Retrieve HBA device model name and description.
+ * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
* @phba: pointer to lpfc hba data structure.
* @mdp: pointer to the data structure to hold the derived model name.
* @descp: pointer to the data structure to hold the derived description.
m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
}
/**
- * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring.
+ * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a IOCB ring.
* @cnt: the number of IOCBs to be posted to the IOCB ring.
}
/**
- * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring.
+ * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
* @phba: pointer to lpfc hba data structure.
*
* This routine posts initial receive IOCB buffers to the ELS ring. The
#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
/**
- * lpfc_sha_init: Set up initial array of hash table entries.
+ * lpfc_sha_init - Set up initial array of hash table entries
* @HashResultPointer: pointer to an array as hash table.
*
* This routine sets up the initial values to the array of hash table entries
}
/**
- * lpfc_sha_iterate: Iterate initial hash table with the working hash table.
+ * lpfc_sha_iterate - Iterate initial hash table with the working hash table
* @HashResultPointer: pointer to an initial/result hash table.
* @HashWorkingPointer: pointer to an working hash table.
*
}
/**
- * lpfc_challenge_key: Create challenge key based on WWPN of the HBA.
+ * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
* @RandomChallenge: pointer to the entry of host challenge random number array.
* @HashWorking: pointer to the entry of the working hash array.
*
}
/**
- * lpfc_hba_init: Perform special handling for LC HBA initialization.
+ * lpfc_hba_init - Perform special handling for LC HBA initialization
* @phba: pointer to lpfc hba data structure.
* @hbainit: pointer to an array of unsigned 32-bit integers.
*
}
/**
- * lpfc_cleanup: Performs vport cleanups before deleting a vport.
+ * lpfc_cleanup - Performs vport cleanups before deleting a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine performs the necessary cleanups before deleting the @vport.
}
/**
- * lpfc_stop_vport_timers: Stop all the timers associated with a vport.
+ * lpfc_stop_vport_timers - Stop all the timers associated with a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine stops all the timers associated with a @vport. This function
}
/**
- * lpfc_stop_phba_timers: Stop all the timers associated with an HBA.
+ * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
}
/**
- * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked.
+ * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as blocked. Once the HBA's
}
/**
- * lpfc_online: Initialize and bring a HBA online.
+ * lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
* This routine initializes the HBA and brings a HBA online. During this
}
/**
- * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked.
+ * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as not blocked. Once the
}
/**
- * lpfc_offline_prep: Prepare a HBA to be brought offline.
+ * lpfc_offline_prep - Prepare a HBA to be brought offline
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to prepare a HBA to be brought offline. It performs
}
/**
- * lpfc_offline: Bring a HBA offline.
+ * lpfc_offline - Bring a HBA offline
* @phba: pointer to lpfc hba data structure.
*
* This routine actually brings a HBA offline. It stops all the timers
}
/**
- * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists.
+ * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the SCSI buffers and IOCBs from the driver
}
/**
- * lpfc_create_port: Create an FC port.
+ * lpfc_create_port - Create an FC port
* @phba: pointer to lpfc hba data structure.
* @instance: a unique integer ID to this FC port.
* @dev: pointer to the device data structure.
}
/**
- * destroy_port: Destroy an FC port.
+ * destroy_port - destroy an FC port
* @vport: pointer to an lpfc virtual N_Port data structure.
*
* This routine destroys a FC port from the upper layer protocol. All the
}
/**
- * lpfc_get_instance: Get a unique integer ID.
+ * lpfc_get_instance - Get a unique integer ID
*
* This routine allocates a unique integer ID from lpfc_hba_index pool. It
* uses the kernel idr facility to perform the task.
}
/**
- * lpfc_scan_finished: method for SCSI layer to detect whether scan is done.
+ * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
* @shost: pointer to SCSI host data structure.
* @time: elapsed time of the scan in jiffies.
*
}
/**
- * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port.
+ * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
* @shost: pointer to SCSI host data structure.
*
* This routine initializes a given SCSI host attributes on a FC port. The
}
/**
- * lpfc_enable_msix: Enable MSI-X interrupt mode.
+ * lpfc_enable_msix - Enable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors. The kernel
}
/**
- * lpfc_disable_msix: Disable MSI-X interrupt mode.
+ * lpfc_disable_msix - Disable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
}
/**
- * lpfc_enable_msi: Enable MSI interrupt mode.
+ * lpfc_enable_msi - Enable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode. The kernel
}
/**
- * lpfc_disable_msi: Disable MSI interrupt mode.
+ * lpfc_disable_msi - Disable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the MSI interrupt mode. The driver
}
/**
- * lpfc_log_intr_mode: Log the active interrupt mode
+ * lpfc_log_intr_mode - Log the active interrupt mode
* @phba: pointer to lpfc hba data structure.
* @intr_mode: active interrupt mode adopted.
*
}
/**
- * lpfc_enable_intr: Enable device interrupt.
+ * lpfc_enable_intr - Enable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
}
/**
- * lpfc_disable_intr: Disable device interrupt.
+ * lpfc_disable_intr - Disable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate the
}
/**
- * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
+ * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
}
/**
- * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem.
+ * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem. When an
lpfc_free_sysfs_attr(vport);
- kthread_stop(phba->worker_thread);
-
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
+
+ /* HBA interrupt will be diabled after this call */
lpfc_sli_hba_down(phba);
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
+ /* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
lpfc_stop_phba_timers(phba);
}
/**
- * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
* @pdev: pointer to PCI device
* @msg: power management message
*
}
/**
- * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
+ * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem to support
}
/**
- * lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
+ * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
}
/**
- * lpfc_io_slot_reset: Restart a PCI device from scratch.
+ * lpfc_io_slot_reset - Restart a PCI device from scratch
* @pdev: pointer to PCI device.
*
* This routine is registered to the PCI subsystem for error handling. This is
}
/**
- * lpfc_io_resume: Resume PCI I/O operation.
+ * lpfc_io_resume - Resume PCI I/O operation
* @pdev: pointer to PCI device
*
* This routine is registered to the PCI subsystem for error handling. It is
};
/**
- * lpfc_init: lpfc module initialization routine.
+ * lpfc_init - lpfc module initialization routine
*
* This routine is to be invoked when the lpfc module is loaded into the
* kernel. The special kernel macro module_init() is used to indicate the
}
/**
- * lpfc_exit: lpfc module removal routine.
+ * lpfc_exit - lpfc module removal routine
*
* This routine is invoked when the lpfc module is removed from the kernel.
* The special kernel macro module_exit() is used to indicate the role of
#define LOG_FCP 0x40 /* FCP traffic history */
#define LOG_NODE 0x80 /* Node table events */
#define LOG_TEMP 0x100 /* Temperature sensor events */
-#define LOG_BG 0x200 /* BlockBuard events */
+#define LOG_BG 0x200 /* BlockGuard events */
#define LOG_MISC 0x400 /* Miscellaneous events */
#define LOG_SLI 0x800 /* SLI events */
#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
#include "lpfc_compat.h"
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory.
+ * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @offset: offset for dumping VPD memory mailbox command.
}
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
+ * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
+ *
* This function create a dump memory mailbox command to dump wake up
* parameters.
*/
}
/**
- * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
+ * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_async: Prepare a mailbox command for enabling HBA async event.
+ * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @ring: ring number for the asynchronous event to be configured.
}
/**
- * lpfc_heart_beat: Prepare a mailbox command for heart beat.
+ * lpfc_heart_beat - Prepare a mailbox command for heart beat
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_read_la: Prepare a mailbox command for reading HBA link attention.
+ * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @mp: DMA buffer memory for reading the link attention information into.
}
/**
- * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention.
+ * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA.
+ * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
+ * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @topology: the link topology for the link to be initialized to.
}
/**
- * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters.
+ * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @vpi: virtual N_Port identifier.
}
/**
- * lpfc_unreg_did: Prepare a mailbox command for unregistering DID.
+ * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
}
/**
- * lpfc_read_config: Prepare a mailbox command for reading HBA configuration.
+ * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats.
+ * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_reg_login: Prepare a mailbox command for registering remote login.
+ * lpfc_reg_login - Prepare a mailbox command for registering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
}
/**
- * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login.
+ * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @rpi: remote port identifier
}
/**
- * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier.
+ * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
}
/**
- * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id.
+ * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @pmb: pointer to the driver internal queue element for mailbox command.
}
/**
- * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB)
+ * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB)
* @phba: pointer to lpfc hba data structure.
*
* This routine sets up and initializes the IOCB rings in the Port Control
}
/**
- * lpfc_read_rev: Prepare a mailbox command for reading HBA revision.
+ * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2.
+ * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3.
+ * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5.
+ * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ.
+ * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
* @phba: pointer to lpfc hba data structure.
* @id: HBQ identifier.
* @hbq_desc: pointer to the HBA descriptor data structure.
}
/**
- * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring.
+ * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
* @phba: pointer to lpfc hba data structure.
* @ring:
* @pmb: pointer to the driver internal queue element for mailbox command.
}
/**
- * lpfc_config_port: Prepare a mailbox command for configuring port.
+ * lpfc_config_port - Prepare a mailbox command for configuring port
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_kill_board: Prepare a mailbox command for killing board.
+ * lpfc_kill_board - Prepare a mailbox command for killing board
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue.
+ * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue.
+ * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
*
* Driver maintains a internal mailbox command queue implemented as a linked
}
/**
- * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list.
+ * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value.
+ * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
* @cmd: mailbox command code.
*
/**
- * lpfc_mem_alloc: create and allocate all PCI and memory pools
+ * lpfc_mem_alloc - create and allocate all PCI and memory pools
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
}
/**
- * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
* Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
* lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask.
+ * lpfc_nodelist. Also frees the VPI bitmask
*
* Returns: None
**/
}
/**
- * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool
+ * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool
* @phba: HBA which owns the pool to allocate from
* @mem_flags: indicates if this is a priority (MEM_PRI) allocation
* @handle: used to return the DMA-mapped address of the mbuf
}
/**
- * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
+ * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
}
/**
- * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
+ * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
* Returns: None
**/
void
-
lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
{
unsigned long iflags;
}
/**
- * lpfc_els_hbq_alloc: Allocate an HBQ buffer
+ * lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
* Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
}
/**
- * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
}
/**
- * lpfc_in_buf_free: Free a DMA buffer
+ * lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
*
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd;
/* Abort outstanding I/O on NPort <nlp_DID> */
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
return 0;
}
}
/**
- * lpfc_update_stats: Update statistical data for the command completion.
+ * lpfc_update_stats - Update statistical data for the command completion
* @phba: Pointer to HBA object.
* @lpfc_cmd: lpfc scsi command object pointer.
*
}
/**
- * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
- * event.
+ * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
* @phba: Pointer to HBA context object.
* @vport: Pointer to vport object.
* @ndlp: Pointer to FC node associated with the target.
}
/**
- * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread.
+ * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine is called when there is resource error in driver or firmware.
}
/**
- * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
**/
static inline void
lpfc_rampup_queue_depth(struct lpfc_vport *vport,
- struct scsi_device *sdev)
+ uint32_t queue_depth)
{
unsigned long flags;
struct lpfc_hba *phba = vport->phba;
uint32_t evt_posted;
atomic_inc(&phba->num_cmd_success);
- if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
+ if (vport->cfg_lun_queue_depth <= queue_depth)
return;
spin_lock_irqsave(&phba->hbalock, flags);
if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
}
/**
- * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker
}
/**
- * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_UP_QUEUE event for worker
}
/**
- * lpfc_scsi_dev_block: set all scsi hosts to block state.
+ * lpfc_scsi_dev_block - set all scsi hosts to block state
* @phba: Pointer to HBA context object.
*
* This function walks vport list and set each SCSI host to block state
}
/**
- * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * lpfc_new_scsi_buf - Scsi buffer allocator
* @vport: The virtual port for which this call being executed.
*
* This routine allocates a scsi buffer, which contains all the necessary
}
/**
- * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
* @phba: The Hba for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
}
/**
- * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
}
/**
- * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* Due to difference in data length between DIF/non-DIF paths,
* we need to set word 4 of IOCB here
*/
- iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
return 0;
}
/**
* lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
* @sc: in: SCSI command
- * @apptagmask out: app tag mask
- * @apptagval out: app tag value
- * @reftag out: ref tag (reference tag)
+ * @apptagmask: out: app tag mask
+ * @apptagval: out: app tag value
+ * @reftag: out: ref tag (reference tag)
*
* Description:
* Extract DIF paramters from the command if possible. Otherwise,
}
/**
- * lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
+ * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
* @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
}
/**
- * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
}
/**
- * lpfc_handler_fcp_err: FCP response handler.
+ * lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @rsp_iocb: The response IOCB which contains FCP error.
}
/**
- * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
* @pIocbOut: The response IOCBQ for the scsi cmnd .
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
int result;
- struct scsi_device *sdev, *tmp_sdev;
+ struct scsi_device *tmp_sdev;
int depth = 0;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
+ struct Scsi_Host *shost = cmd->device->host;
+ uint32_t queue_depth, scsi_id;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
lpfc_update_stats(phba, lpfc_cmd);
result = cmd->result;
- sdev = cmd->device;
if (vport->cfg_max_scsicmpl_time &&
time_after(jiffies, lpfc_cmd->start_time +
msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if (pnode->cmd_qdepth >
atomic_read(&pnode->cmd_pending) &&
pnode->last_change_time = jiffies;
}
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
time_after(jiffies, pnode->last_change_time +
msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
pnode->cmd_qdepth += pnode->cmd_qdepth *
LPFC_TGTQ_RAMPUP_PCENT / 100;
if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
pnode->last_change_time = jiffies;
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
}
}
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+
+ /* The sdev is not guaranteed to be valid post scsi_done upcall. */
+ queue_depth = cmd->device->queue_depth;
+ scsi_id = cmd->device->id;
cmd->scsi_done(cmd);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
if (!result)
- lpfc_rampup_queue_depth(vport, sdev);
+ lpfc_rampup_queue_depth(vport, queue_depth);
if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
((jiffies - pnode->last_ramp_up_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
((jiffies - pnode->last_q_full_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
- (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
- shost_for_each_device(tmp_sdev, sdev->host) {
+ (vport->cfg_lun_queue_depth > queue_depth)) {
+ shost_for_each_device(tmp_sdev, shost) {
if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
- if (tmp_sdev->id != sdev->id)
+ if (tmp_sdev->id != scsi_id)
continue;
if (tmp_sdev->ordered_tags)
scsi_adjust_queue_depth(tmp_sdev,
}
lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
0xFFFFFFFF,
- sdev->queue_depth - 1, sdev->queue_depth);
+ queue_depth , queue_depth + 1);
}
/*
NLP_CHK_NODE_ACT(pnode)) {
pnode->last_q_full_time = jiffies;
- shost_for_each_device(tmp_sdev, sdev->host) {
- if (tmp_sdev->id != sdev->id)
+ shost_for_each_device(tmp_sdev, shost) {
+ if (tmp_sdev->id != scsi_id)
continue;
depth = scsi_track_queue_full(tmp_sdev,
tmp_sdev->queue_depth - 1);
* scsi_track_queue_full.
*/
if (depth == -1)
- depth = sdev->host->cmd_per_lun;
+ depth = shost->cmd_per_lun;
if (depth) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
/**
- * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
* @data: A pointer to the immediate command data portion of the IOCB.
* @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
*
}
/**
- * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit.
+ * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
}
/**
- * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
* @rspiocbq: Pointer to lpfc_iocbq data structure.
}
/**
- * lpfc_scsi_tgt_reset: Target reset handler.
+ * lpfc_scsi_tgt_reset - Target reset handler
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
* @vport: The virtual port for which this call is being executed.
* @tgt_id: Target ID.
}
/**
- * lpfc_info: Info entry point of scsi_host_template data structure.
+ * lpfc_info - Info entry point of scsi_host_template data structure
* @host: The scsi host for which this call is being executed.
*
* This routine provides module information about hba.
}
/**
- * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
* @phba: The Hba for which this call is being executed.
*
* This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo.
}
/**
- * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
* @phba: The Hba for which this call is being executed.
*
* This routine starts the fcp_poll_timer of @phba.
}
/**
- * lpfc_poll_timeout: Restart polling timer.
+ * lpfc_poll_timeout - Restart polling timer
* @ptr: Map to lpfc_hba data structure pointer.
*
* This routine restarts fcp_poll timer, when FCP ring polling is enable
}
/**
- * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
- * structure.
+ * lpfc_queuecommand - scsi_host_template queuecommand entry point
* @cmnd: Pointer to scsi_cmnd data structure.
* @done: Pointer to done routine.
*
}
/**
- * lpfc_block_error_handler: Routine to block error handler.
+ * lpfc_block_error_handler - Routine to block error handler
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
}
/**
- * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
- *structure.
+ * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine aborts @cmnd pending in base driver.
}
/**
- * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
- *data structure.
+ * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does a device reset by sending a TARGET_RESET task management
*
* Return code :
* 0x2003 - Error
- * 0ex2002 - Success
+ * 0x2002 - Success
**/
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
- * Template data structure.
+ * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does target reset to all target on @cmnd->device->host.
}
/**
- * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
- * structure.
+ * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
* @sdev: Pointer to scsi_device.
*
* This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
}
/**
- * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
- * structure.
+ * lpfc_slave_configure - scsi_host_template slave_configure entry point
* @sdev: Pointer to scsi_device.
*
* This routine configures following items
}
/**
- * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
* @sdev: Pointer to scsi_device.
*
* This routine sets @sdev hostatdata filed to null.
} lpfc_iocb_type;
/**
- * lpfc_cmd_iocb: Get next command iocb entry in the ring.
+ * lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_resp_iocb: Get next response iocb entry in the ring.
+ * lpfc_resp_iocb - Get next response iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with hbalock held. This function
}
/**
- * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function
}
/**
- * __lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_iocb_cmd_type: Get the iocb type.
- * @iocb_cmnd : iocb command code.
+ * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list.
+ * @phba: Pointer to HBA context object.
+ * @iocblist: List of IOCBs.
+ * @ulpstatus: ULP status in IOCB command field.
+ * @ulpWord4: ULP word-4 in IOCB command field.
+ *
+ * This function is called with a list of IOCBs to cancel. It cancels the IOCB
+ * on the list by invoking the complete callback function associated with the
+ * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond
+ * fields.
+ **/
+void
+lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist,
+ uint32_t ulpstatus, uint32_t ulpWord4)
+{
+ struct lpfc_iocbq *piocb;
+
+ while (!list_empty(iocblist)) {
+ list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
+
+ if (!piocb->iocb_cmpl)
+ lpfc_sli_release_iocbq(phba, piocb);
+ else {
+ piocb->iocb.ulpStatus = ulpstatus;
+ piocb->iocb.un.ulpWord[4] = ulpWord4;
+ (piocb->iocb_cmpl) (phba, piocb, piocb);
+ }
+ }
+ return;
+}
+
+/**
+ * lpfc_sli_iocb_cmd_type - Get the iocb type
+ * @iocb_cmnd: iocb command code.
*
* This function is called by ring event handler function to get the iocb type.
* This function translates the iocb command to an iocb command type used to
}
/**
- * lpfc_sli_ring_map: Issue config_ring mbox for all rings.
+ * lpfc_sli_ring_map - Issue config_ring mbox for all rings
* @phba: Pointer to HBA context object.
*
* This function is called from SLI initialization code
}
/**
- * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq.
+ * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to the driver iocb object.
}
/**
- * lpfc_sli_ringtx_get: Get first element of the txq.
+ * lpfc_sli_ringtx_get - Get first element of the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring.
+ * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_iotag: Get an iotag for the iocb.
+ * lpfc_sli_next_iotag - Get an iotag for the iocb
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_submit_iocb: Submit an iocb to the firmware.
+ * lpfc_sli_submit_iocb - Submit an iocb to the firmware
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocb: Pointer to iocb slot in the ring.
}
/**
- * lpfc_sli_update_full_ring: Update the chip attention register.
+ * lpfc_sli_update_full_ring - Update the chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_update_ring: Update chip attention register.
+ * lpfc_sli_update_ring - Update chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_resume_iocb: Process iocbs in the txq.
+ * lpfc_sli_resume_iocb - Process iocbs in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ.
+ * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
*
}
/**
- * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers.
+ * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held to free all the
}
/**
- * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware.
+ * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @hbq_buf: Pointer to HBQ buffer.
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
.buffer_count = 0,
- .init_count = 20,
- .add_count = 5,
+ .init_count = 40,
+ .add_count = 40,
};
/* HBQ for the extra ring if needed */
};
/**
- * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ.
+ * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @count: Number of HBQ buffers to be posted.
}
/**
- * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware.
+ * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware
* @phba: Pointer to HBA context object.
* @qno: HBQ number.
*
}
/**
- * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ.
+ * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ
* @phba: Pointer to HBA context object.
* @qno: HBQ queue number.
*
}
/**
- * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag.
+ * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
*
}
/**
- * lpfc_sli_free_hbq: Give back the hbq buffer to firmware.
+ * lpfc_sli_free_hbq - Give back the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbq_buffer: Pointer to HBQ buffer.
*
}
/**
- * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox.
+ * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox
* @mbxCommand: mailbox command code.
*
* This function is called by the mailbox event handler function to verify
}
/**
- * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from
- * lpfc_sli_issue_mbox_wait.
+ * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to mailbox command.
*
/**
- * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler.
+ * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler
* @phba: Pointer to HBA context object.
* @pmb: Pointer to mailbox object.
*
}
/**
- * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware.
+ * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function processes all
}
/**
- * lpfc_sli_get_buff: Get the buffer associated with the buffer tag.
+ * lpfc_sli_get_buff - Get the buffer associated with the buffer tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: buffer tag.
/**
- * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler.
+ * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the unsolicited iocb.
}
/**
- * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb.
+ * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @prspiocb: Pointer to response iocb object.
}
/**
- * lpfc_sli_process_sol_iocb: process solicited iocb completion.
+ * lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the response iocb to be processed.
* Ring <ringno> handler: unexpected completion IoTag
* <IoTag>
*/
- lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0322 Ring %d handler: "
"unexpected completion IoTag x%x "
"Data: x%x x%x x%x x%x\n",
}
/**
- * lpfc_sli_rsp_pointers_error: Response ring pointer error handler.
+ * lpfc_sli_rsp_pointers_error - Response ring pointer error handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_poll_eratt: Error attention polling timer timeout handler.
+ * lpfc_poll_eratt - Error attention polling timer timeout handler
* @ptr: Pointer to address of HBA context object.
*
* This function is invoked by the Error Attention polling timer when the
}
/**
- * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode.
+ * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode
* @phba: Pointer to HBA context object.
*
* This function is called from lpfc_queuecommand, lpfc_poll_timeout,
}
/**
- * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring.
+ * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
}
/**
- * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings.
+ * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
}
/**
- * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring.
+ * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
{
LIST_HEAD(completions);
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd = NULL;
if (pring->ringno == LPFC_ELS_RING) {
lpfc_fabric_abort_hba(phba);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring.
+ * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
* @phba: Pointer to HBA context object.
*
* This function flushes all iocbs in the fcp ring and frees all the iocb
{
LIST_HEAD(txq);
LIST_HEAD(txcmplq);
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
spin_unlock_irq(&phba->hbalock);
/* Flush the txq */
- while (!list_empty(&txq)) {
- iocb = list_get_first(&txq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
/* Flush the txcmpq */
- while (!list_empty(&txcmplq)) {
- iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
}
/**
- * lpfc_sli_brdready: Check for host status bits.
+ * lpfc_sli_brdready - Check for host status bits
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
- * lpfc_reset_barrier: Make HBA ready for HBA reset.
+ * lpfc_reset_barrier - Make HBA ready for HBA reset
* @phba: Pointer to HBA context object.
*
* This function is called before resetting an HBA. This
}
/**
- * lpfc_sli_brdkill: Issue a kill_board mailbox command.
+ * lpfc_sli_brdkill - Issue a kill_board mailbox command
* @phba: Pointer to HBA context object.
*
* This function issues a kill_board mailbox command and waits for
}
/**
- * lpfc_sli_brdreset: Reset the HBA.
+ * lpfc_sli_brdreset - Reset the HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
}
/**
- * lpfc_sli_brdrestart: Restart the HBA.
+ * lpfc_sli_brdrestart - Restart the HBA
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
}
/**
- * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart.
+ * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
* This function is called after a HBA restart to wait for successful
}
/**
- * lpfc_sli_hbq_count: Get the number of HBQs to be configured.
+ * lpfc_sli_hbq_count - Get the number of HBQs to be configured
*
* This function calculates and returns the number of HBQs required to be
* configured.
}
/**
- * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries.
+ * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries
*
* This function adds the number of hbq entries in every HBQ to get
* the total number of hbq entries required for the HBA and returns
}
/**
- * lpfc_sli_hbq_size: Calculate memory required for all hbq entries.
+ * lpfc_sli_hbq_size - Calculate memory required for all hbq entries
*
* This function calculates amount of memory required for all hbq entries
* to be configured and returns the total memory required.
}
/**
- * lpfc_sli_hbq_setup: configure and initialize HBQs.
+ * lpfc_sli_hbq_setup - configure and initialize HBQs
* @phba: Pointer to HBA context object.
*
* This function is called during the SLI initialization to configure
}
/**
- * lpfc_sli_config_port: Issue config port mailbox command.
+ * lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
/**
- * lpfc_sli_hba_setup: SLI intialization function.
+ * lpfc_sli_hba_setup - SLI intialization function
* @phba: Pointer to HBA context object.
*
* This function is the main SLI intialization function. This function
/**
- * lpfc_mbox_timeout: Timeout call back function for mbox timer.
+ * lpfc_mbox_timeout - Timeout call back function for mbox timer
* @ptr: context object - pointer to hba structure.
*
* This is the callback function for mailbox timer. The mailbox
/**
- * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout.
+ * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout
* @phba: Pointer to HBA context object.
*
* This function is called from worker thread when a mailbox command times out.
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
+ /* Check the pmbox pointer first. There is a race condition
+ * between the mbox timeout handler getting executed in the
+ * worklist and the mailbox actually completing. When this
+ * race condition occurs, the mbox_active will be NULL.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (pmbox == NULL) {
+ lpfc_printf_log(phba, KERN_WARNING,
+ LOG_MBOX | LOG_SLI,
+ "0353 Active Mailbox cleared - mailbox timeout "
+ "exiting\n");
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
/* Mbox cmd <mbxCommand> timeout */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
phba->pport->port_state,
phba->sli.sli_flag,
phba->sli.mbox_active);
+ spin_unlock_irq(&phba->hbalock);
/* Setting state unknown so lpfc_sli_abort_iocb_ring
* would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
}
/**
- * lpfc_sli_issue_mbox: Issue a mailbox command to firmware.
+ * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
goto out_not_finished;
}
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ goto out_not_finished;
+ }
+
psli = &phba->sli;
mb = &pmbox->mb;
}
/**
- * __lpfc_sli_ringtx_put: Add an iocb to the txq.
+ * __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
}
/**
- * lpfc_sli_next_iocb: Get the next iocb in the txq.
+ * lpfc_sli_next_iocb - Get the next iocb in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
}
/**
- * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb.
+ * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
if (unlikely(pci_channel_offline(phba->pcidev)))
return IOCB_ERROR;
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT))
+ return IOCB_ERROR;
+
/*
* We should never get an IOCB if we are in a < LINK_DOWN state
*/
/**
- * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb.
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
}
/**
- * lpfc_extra_ring_setup: Extra ring setup function.
+ * lpfc_extra_ring_setup - Extra ring setup function
* @phba: Pointer to HBA context object.
*
* This function is called while driver attaches with the
}
/**
- * lpfc_sli_async_event_handler: ASYNC iocb handler function.
+ * lpfc_sli_async_event_handler - ASYNC iocb handler function
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocbq: Pointer to iocb object.
uint16_t temp;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
+ uint32_t *iocb_w;
icmd = &iocbq->iocb;
evt_code = icmd->un.asyncstat.evt_code;
if ((evt_code != ASYNC_TEMP_WARN) &&
(evt_code != ASYNC_TEMP_SAFE)) {
+ iocb_w = (uint32_t *) icmd;
lpfc_printf_log(phba,
KERN_ERR,
LOG_SLI,
"0346 Ring %d handler: unexpected ASYNC_STATUS"
- " evt_code 0x%x\n",
+ " evt_code 0x%x \n"
+ "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n"
+ "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n"
+ "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n"
+ "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
pring->ringno,
- icmd->un.asyncstat.evt_code);
+ icmd->un.asyncstat.evt_code,
+ iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
+ iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
+ iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
+ iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
+
return;
}
temp_event_data.data = (uint32_t)temp;
/**
- * lpfc_sli_setup: SLI ring setup function.
+ * lpfc_sli_setup - SLI ring setup function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_setup sets up rings of the SLI interface with
}
/**
- * lpfc_sli_queue_setup: Queue initialization function.
+ * lpfc_sli_queue_setup - Queue initialization function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each
}
/**
- * lpfc_sli_host_down: Vport cleanup function.
+ * lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
* lpfc_sli_host_down is called to clean up the resources
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
- iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
return 1;
}
/**
- * lpfc_sli_hba_down: Resource cleanup function for the HBA.
+ * lpfc_sli_hba_down - Resource cleanup function for the HBA
* @phba: Pointer to HBA context object.
*
* This function cleans up all iocb, buffers, mailbox commands
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
LPFC_MBOXQ_t *pmb;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
int i;
unsigned long flags = 0;
}
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
spin_lock_irqsave(&phba->hbalock, flags);
list_splice_init(&phba->elsbuf, &completions);
}
/**
- * lpfc_sli_pcimem_bcopy: SLI memory copy function.
+ * lpfc_sli_pcimem_bcopy - SLI memory copy function
* @srcp: Source memory pointer.
* @destp: Destination memory pointer.
* @cnt: Number of words required to be copied.
/**
- * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq.
+ * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mp: Pointer to driver buffer object.
}
/**
- * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted
- * using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer
* @phba: Pointer to HBA context object.
*
* When HBQ is enabled, buffers are searched based on tags. This function
}
/**
- * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with
- * posted using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: Buffer tag.
}
/**
- * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for
- * unsolicited ct and els events.
+ * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @phys: DMA address of the buffer.
}
/**
- * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs.
+ * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
}
/**
- * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command.
+ * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
}
/**
- * lpfc_sli_issue_abort_iotag: Abort function for a command iocb.
+ * lpfc_sli_issue_abort_iotag - Abort function for a command iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @cmdiocb: Pointer to driver command iocb object.
}
/**
- * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands
- * associated with a vport/SCSI target/lun.
+ * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN
* @iocbq: Pointer to driver iocb object.
* @vport: Pointer to driver virtual port object.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
* @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST
*
- * This function acts as iocb filter for functions which abort or count
+ * This function acts as an iocb filter for functions which abort or count
* all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return
* 0 if the filtering criteria is met for the given iocb and will return
* 1 if the filtering criteria is not met.
}
/**
- * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending.
+ * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending
* @vport: Pointer to virtual port.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
}
/**
- * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted
- * FCP iocb.
+ * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs
* @phba: Pointer to HBA context object
* @cmdiocb: Pointer to command iocb object.
* @rspiocb: Pointer to response iocb object.
}
/**
- * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands
- * pending on a SCSI host(vport)/target/lun.
+ * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN
* @vport: Pointer to virtual port.
* @pring: Pointer to driver SLI ring object.
* @tgt_id: SCSI ID of the target.
}
/**
- * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using
- * lpfc_sli_issue_iocb_wait.
+ * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
* @phba: Pointer to HBA context object.
* @cmdiocbq: Pointer to command iocb.
* @rspiocbq: Pointer to response iocb.
}
/**
- * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands.
+ * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
* @phba: Pointer to HBA context object..
* @pring: Pointer to sli ring.
* @piocb: Pointer to command iocb.
}
/**
- * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox.
+ * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to driver mailbox object.
* @timeout: Timeout in number of seconds.
}
/**
- * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function.
+ * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
* @phba: Pointer to HBA context.
*
* This function is called to cleanup any pending mailbox
}
/**
- * lpfc_sli_check_eratt: check error attention events
+ * lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
* This function is called form timer soft interrupt context to check HBA's
return 0;
}
+ /*
+ * If there is deferred error attention, do not check for error
+ * attention
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+ }
+
/* Read chip Host Attention (HA) register */
ha_copy = readl(phba->HAregaddr);
if (ha_copy & HA_ERATT) {
/* Read host status register to retrieve error event */
lpfc_sli_read_hs(phba);
+
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+
/* Set the driver HA work bitmap */
phba->work_ha |= HA_ERATT;
/* Indicate polling handles this ERATT */
}
/**
- * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver.
+ * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
/* Indicate interrupt handler handles ERATT */
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+
+ /*
+ * If there is deferred error attention, do not check for any
+ * interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear up only attention source related to slow-path */
writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
phba->HAregaddr);
}
}
spin_lock_irqsave(&phba->hbalock, iflag);
- if (work_ha_copy & HA_ERATT)
+ if (work_ha_copy & HA_ERATT) {
lpfc_sli_read_hs(phba);
+ /*
+ * Check if there is a deferred error condition
+ * is active
+ */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+ }
+
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
} /* lpfc_sp_intr_handler */
/**
- * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver.
+ * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
ha_copy = readl(phba->HAregaddr);
/* Clear up only attention source related to fast-path */
spin_lock_irqsave(&phba->hbalock, iflag);
+ /*
+ * If there is deferred error attention, do not check for
+ * any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
} /* lpfc_fp_intr_handler */
/**
- * lpfc_intr_handler: The device-level interrupt handler of lpfc driver.
+ * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+ /*
+ * If there is deferred error attention, do not check for any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear attention sources except link and error attentions */
writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.0"
+#define LPFC_DRIVER_VERSION "8.3.1"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved."
}
/**
- * lpfc_discovery_wait: Wait for driver discovery to quiesce.
+ * lpfc_discovery_wait - Wait for driver discovery to quiesce
* @vport: The virtual port for which this call is being executed.
*
* This driver calls this routine specifically from lpfc_vport_delete
/**
- * lpfc_vport_reset_stat_data: Reset the statistical data for the vport.
+ * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
* @vport: Pointer to vport object.
*
* This function resets the statistical data for the vport. This function
/**
- * lpfc_alloc_bucket: Allocate data buffer required for collecting
- * statistical data.
+ * lpfc_alloc_bucket - Allocate data buffer required for statistical data
* @vport: Pointer to vport object.
*
* This function allocates data buffer required for all the FC
}
/**
- * lpfc_free_bucket: Free data buffer required for collecting
- * statistical data.
+ * lpfc_free_bucket - Free data buffer required for statistical data
* @vport: Pointer to vport object.
*
* Th function frees statistical data buffer of all the FC
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
+ union reply_descriptor {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+ };
+ union reply_descriptor rd;
u32 post_index, post_index_next, completed_cmds;
u8 request_desript_type;
u16 smid;
completed_cmds = 0;
do {
- if (ioc->reply_post_free[post_index].Words == ~0ULL)
+ rd.word = ioc->reply_post_free[post_index].Words;
+ if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
goto out;
reply = 0;
cb_idx = 0xFF;
for (i = 0 ; i < completed_cmds; i++) {
post_index = post_index_next;
/* poison the reply post descriptor */
- ioc->reply_post_free[post_index_next].Words = ~0ULL;
+ ioc->reply_post_free[post_index_next].Words = ULLONG_MAX;
post_index_next = (post_index ==
(ioc->reply_post_queue_depth - 1))
? 0 : post_index + 1;
&ioc->scsi_lookup_lock);
}
+/**
+ * _base_display_dell_branding - Disply branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+ char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
+
+ if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
+ return;
+
+ memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ default:
+ sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
+ break;
+ }
+
+ printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
+ " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
+ ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
+ ioc->pdev->subsystem_device);
+}
+
/**
* _base_display_ioc_capabilities - Disply IOC's capabilities.
* @ioc: per adapter object
i++;
}
+ _base_display_dell_branding(ioc);
+
i = 0;
printk("), ");
printk("Capabilities=(");
/* initialize Reply Post Free Queue */
for (i = 0; i < ioc->reply_post_queue_depth; i++)
- ioc->reply_post_free[i].Words = ~0ULL;
+ ioc->reply_post_free[i].Words = ULLONG_MAX;
r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
if (r)
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "00.100.11.16"
+#define MPT2SAS_DRIVER_VERSION "01.100.02.00"
#define MPT2SAS_MAJOR_VERSION 00
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 11
-#define MPT2SAS_RELEASE_VERSION 16
+#define MPT2SAS_BUILD_VERSION 02
+#define MPT2SAS_RELEASE_VERSION 00
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
+/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
+
/*
* per target private data
*/
static struct fasync_struct *async_queue;
static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
+ u8 *issue_reset);
+
/**
* enum block_state - blocking state
* @NON_BLOCKING: non blocking
void
mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
+ int i;
+ u8 issue_reset;
+
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ _ctl_send_release(ioc, i, &issue_reset);
+ }
break;
case MPT2_IOC_AFTER_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ ioc->diag_buffer_status[i] |=
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ }
break;
}
}
if (tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- if (_ctl_do_task_abort(ioc, &karg, tm_request))
+ if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+ mpt2sas_base_free_smid(ioc, smid);
goto out;
+ }
}
mutex_lock(&ioc->tm_cmds.mutex);
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
- strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION,
- MPT2_IOCTL_VERSION_LENGTH);
- karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0';
+ strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
+ strcat(karg.driver_version, "-");
+ strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
}
/**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- * @state - NON_BLOCKING or BLOCKING
+ * _ctl_send_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @issue_reset - specifies whether host reset is required.
*
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
*/
-static long
-_ctl_diag_release(void __user *arg, enum block_state state)
+static int
+_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
{
- struct mpt2_diag_release karg;
- struct MPT2SAS_ADAPTER *ioc;
- void *request_data;
- int rc;
Mpi2DiagReleaseRequest_t *mpi_request;
Mpi2DiagReleaseReply_t *mpi_reply;
- u8 buffer_type;
- unsigned long timeleft;
u16 smid;
u16 ioc_status;
- u8 issue_reset = 0;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
- return -ENODEV;
+ u32 ioc_state;
+ int rc;
+ unsigned long timeleft;
dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- if (ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
- "is already released\n", ioc->name, __func__,
- buffer_type);
- return 0;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
+ rc = 0;
+ *issue_reset = 0;
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "skipping due to FAULT state\n", ioc->name,
+ __func__));
+ rc = -EAGAIN;
+ goto out;
}
- if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
- return -EAGAIN;
- else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
- return -ERESTARTSYS;
-
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
goto out;
}
- rc = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagReleaseRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ *issue_reset = 1;
+ rc = -EFAULT;
+ goto out;
}
/* process the completed Reply Message Frame */
rc = -EFAULT;
}
- issue_host_reset:
+ out:
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_release karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ int rc;
+ u8 buffer_type;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "is already released\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ /* buffers were released by due to host reset */
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_RELEASED;
+ ioc->diag_buffer_status[buffer_type] &=
+ ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "was released due to host reset\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
+
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- out:
-
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
#endif
#define MPT2SAS_DEV_NAME "mpt2ctl"
-#define MPT2_MAGIC_NUMBER 'm'
+#define MPT2_MAGIC_NUMBER 'L'
#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
/**
/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
+#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)
/* application flags for mpt2_diag_register, mpt2_diag_query */
#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
*/
struct fw_event_work {
struct list_head list;
- struct delayed_work work;
+ struct work_struct work;
struct MPT2SAS_ADAPTER *ioc;
u8 VF_ID;
u8 host_reset_handling;
handle = sas_device->handle;
parent_handle = sas_device->parent_handle;
sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
_scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
- _scsih_sas_device_remove(ioc, sas_device);
- }
}
/**
rphy = dev_to_rphy(starget->dev.parent);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
rphy->identify.sas_address);
- if (sas_device)
+ if (sas_device && (sas_device->starget == starget) &&
+ (sas_device->id == starget->id) &&
+ (sas_device->channel == starget->channel))
sas_device->starget = NULL;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
spin_lock_irqsave(&ioc->fw_event_lock, flags);
list_add_tail(&fw_event->list, &ioc->fw_event_list);
- INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1);
+ INIT_WORK(&fw_event->work, _firmware_event_work);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
return;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
struct sense_info data;
const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
smid);
- memcpy(scmd->sense_buffer, sense_data,
+ u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
le32_to_cpu(mpi_reply->SenseCount));
+ memcpy(scmd->sense_buffer, sense_data, sz);
_scsih_normalize_sense(scmd->sense_buffer, &data);
/* failure prediction threshold exceeded */
if (data.asc == 0x5D)
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
- termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
continue;
mpt2sas_scsih_issue_tm(ioc, handle, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+ MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
termination_count += le32_to_cpu(mpi_reply->TerminationCount);
}
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
ioc->broadcast_aen_busy = 0;
mutex_unlock(&ioc->tm_cmds.mutex);
_firmware_event_work(struct work_struct *work)
{
struct fw_event_work *fw_event = container_of(work,
- struct fw_event_work, work.work);
+ struct fw_event_work, work);
unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
osdv2_attr_list_elem_size(len);
}
+static void _osd_req_alist_elem_encode(struct osd_request *or,
+ void *attr_last, const struct osd_attr *oa)
+{
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ } else {
+ struct osdv2_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ }
+}
+
+static int _osd_req_alist_elem_decode(struct osd_request *or,
+ void *cur_p, struct osd_attr *oa, unsigned max_bytes)
+{
+ unsigned inc;
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD1: On empty attributes we return a pointer to 2 bytes
+ * of zeros. This keeps similar behaviour with OSD2.
+ * (See below)
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val :
+ (u8 *)&attr->attr_bytes;
+ } else {
+ struct osdv2_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD2: For convenience, on empty attributes, we return 8 bytes
+ * of zeros here. This keeps the same behaviour with OSD2r04,
+ * and is nice with null terminating ASCII fields.
+ * oa->val_ptr == NULL marks the end-of-list, or error.
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved;
+ }
+ return inc;
+}
+
static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head)
{
return osd_req_is_ver1(or) ?
struct osd_cdb *ocdb = &or->cdb;
if (osd_req_is_ver1(or))
- return &ocdb->v1.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v1.sec_params;
else
- return &ocdb->v2.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v2.sec_params;
}
void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device)
WARN_ON(or->in.bio);
bio = bio_map_kern(q, list, len, or->alloc_flags);
- if (!bio) {
+ if (IS_ERR(bio)) {
OSD_ERR("!!! Failed to allocate list_objects BIO\n");
- return -ENOMEM;
+ return PTR_ERR(bio);
}
bio->bi_rw &= ~(1 << BIO_RW);
attr_last = or->set_attr.buff + total_bytes;
for (; nelem; --nelem) {
- struct osd_attributes_list_element *attr;
unsigned elem_size = _osd_req_alist_elem_size(or, oa->len);
total_bytes += elem_size;
or->set_attr.buff + or->set_attr.total_bytes;
}
- attr = attr_last;
- attr->attr_page = cpu_to_be32(oa->attr_page);
- attr->attr_id = cpu_to_be32(oa->attr_id);
- attr->attr_bytes = cpu_to_be16(oa->len);
- memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ _osd_req_alist_elem_encode(or, attr_last, oa);
attr_last += elem_size;
++oa;
}
for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) {
- struct osd_attributes_list_element *attr = cur_p;
- unsigned inc;
+ int inc = _osd_req_alist_elem_decode(or, cur_p, oa,
+ returned_bytes - cur_bytes);
- oa->len = be16_to_cpu(attr->attr_bytes);
- inc = _osd_req_alist_elem_size(or, oa->len);
- OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n",
- oa->len, inc, cur_bytes);
- cur_bytes += inc;
- if (cur_bytes > returned_bytes) {
+ if (inc < 0) {
OSD_ERR("BAD FOOD from target. list not valid!"
"c=%d r=%d n=%d\n",
cur_bytes, returned_bytes, n);
break;
}
- oa->attr_page = be32_to_cpu(attr->attr_page);
- oa->attr_id = be32_to_cpu(attr->attr_id);
- oa->val_ptr = attr->attr_val;
-
+ cur_bytes += inc;
cur_p += inc;
++oa;
}
return ret;
}
+static inline void osd_sec_parms_set_out_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_out_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_out_integrity_check_offset = offset;
+}
+
+static inline void osd_sec_parms_set_in_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_in_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_in_integrity_check_offset = offset;
+}
+
static int _osd_req_finalize_data_integrity(struct osd_request *or,
bool has_in, bool has_out, const u8 *cap_key)
{
or->out_data_integ.get_attributes_bytes = cpu_to_be64(
or->enc_get_attr.total_bytes);
- sec_parms->data_out_integrity_check_offset =
- osd_req_encode_offset(or, or->out.total_bytes, &pad);
+ osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->out.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->out.last_seg,
&or->out);
};
unsigned pad;
- sec_parms->data_in_integrity_check_offset =
- osd_req_encode_offset(or, or->in.total_bytes, &pad);
+ osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->in.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->in.last_seg,
&or->in);
if (--starget->target_blocked == 0) {
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
- } else {
- blk_plug_device(sdev->request_queue);
+ } else
return 0;
- }
}
if (scsi_target_is_busy(starget)) {
#include <linux/string_helpers.h>
#include <linux/async.h>
#include <asm/uaccess.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
return -EINVAL;
}
- sector_size = (buffer[8] << 24) | (buffer[9] << 16) |
- (buffer[10] << 8) | buffer[11];
- lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) |
- ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) |
- ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) |
- ((u64)buffer[6] << 8) | (u64)buffer[7]);
+ sector_size = get_unaligned_be32(&buffer[8]);
+ lba = get_unaligned_be64(&buffer[0]);
sd_read_protection_type(sdkp, buffer);
return -EINVAL;
}
- sector_size = (buffer[4] << 24) | (buffer[5] << 16) |
- (buffer[6] << 8) | buffer[7];
- lba = (buffer[0] << 24) | (buffer[1] << 16) |
- (buffer[2] << 8) | buffer[3];
+ sector_size = get_unaligned_be32(&buffer[4]);
+ lba = get_unaligned_be32(&buffer[0]);
if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
/* tasklet or soft irq callback */
static void sg_rq_end_io(struct request *rq, int uptodate);
static int sg_start_req(Sg_request *srp, unsigned char *cmd);
-static void sg_finish_rem_req(Sg_request * srp);
+static int sg_finish_rem_req(Sg_request * srp);
static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size);
static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count,
Sg_request * srp);
goto err_out;
}
err_out:
- sg_finish_rem_req(srp);
+ err = sg_finish_rem_req(srp);
return (0 == err) ? count : err;
}
return blk_trace_setup(sdp->device->request_queue,
sdp->disk->disk_name,
MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
+ NULL,
(char *)arg);
case BLKTRACESTART:
return blk_trace_startstop(sdp->device->request_queue, 1);
return res;
}
-static void
-sg_finish_rem_req(Sg_request * srp)
+static int sg_finish_rem_req(Sg_request * srp)
{
+ int ret = 0;
+
Sg_fd *sfp = srp->parentfp;
Sg_scatter_hold *req_schp = &srp->data;
if (srp->rq) {
if (srp->bio)
- blk_rq_unmap_user(srp->bio);
+ ret = blk_rq_unmap_user(srp->bio);
blk_put_request(srp->rq);
}
sg_remove_request(sfp, srp);
+
+ return ret;
}
static int
if (0 == sr_test_unit_ready(cd->device, &sshdr))
return CDS_DISC_OK;
+ /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */
+ if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
+ && sshdr.asc == 0x04 && sshdr.ascq == 0x01)
+ return CDS_DRIVE_NOT_READY;
+
if (!cdrom_get_media_event(cdi, &med)) {
if (med.media_present)
return CDS_DISC_OK;
}
/*
- * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
- *
* These chips are available with optionally one parallel port and up to
* two serial ports. Unfortunately they all have the same product id.
*
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
-#include <linux/delay.h>
#include <arch/svinto.h>
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct ktermios *serial_termios[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
return 0;
}
+#ifdef CONFIG_PROC_FS
/*
* /proc fs routines....
*/
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
{
- char stat_buf[30];
- int ret;
unsigned long tmp;
- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->ioport, info->irq);
+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->ioport, info->irq);
if (!info->ioport || (info->type == PORT_UNKNOWN)) {
- ret += sprintf(buf+ret, "\n");
- return ret;
+ seq_printf(m, "\n");
+ return;
}
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (!E100_RTS_GET(info))
- strcat(stat_buf, "|RTS");
- if (!E100_CTS_GET(info))
- strcat(stat_buf, "|CTS");
- if (!E100_DTR_GET(info))
- strcat(stat_buf, "|DTR");
- if (!E100_DSR_GET(info))
- strcat(stat_buf, "|DSR");
- if (!E100_CD_GET(info))
- strcat(stat_buf, "|CD");
- if (!E100_RI_GET(info))
- strcat(stat_buf, "|RI");
-
- ret += sprintf(buf+ret, " baud:%d", info->baud);
-
- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ seq_printf(m, " baud:%d", info->baud);
+ seq_printf(m, " tx:%lu rx:%lu",
(unsigned long)info->icount.tx,
(unsigned long)info->icount.rx);
tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
- if (tmp) {
- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
- (unsigned long)tmp,
- (unsigned long)SERIAL_XMIT_SIZE);
- }
+ if (tmp)
+ seq_printf(m, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
- (unsigned long)info->recv_cnt,
- (unsigned long)info->max_recv_cnt);
+ seq_printf(m, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
#if 1
if (info->port.tty) {
-
if (info->port.tty->stopped)
- ret += sprintf(buf+ret, " stopped:%i",
- (int)info->port.tty->stopped);
+ seq_printf(m, " stopped:%i",
+ (int)info->port.tty->stopped);
if (info->port.tty->hw_stopped)
- ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
+ seq_printf(m, " hw_stopped:%i",
+ (int)info->port.tty->hw_stopped);
}
{
unsigned char rstat = info->ioport[REG_STATUS];
- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
- ret += sprintf(buf+ret, " xoff_detect:1");
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+ seq_printf(m, " xoff_detect:1");
}
#endif
-
-
-
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%lu",
- (unsigned long)info->icount.frame);
+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%lu",
- (unsigned long)info->icount.parity);
+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%lu",
- (unsigned long)info->icount.brk);
+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%lu",
- (unsigned long)info->icount.overrun);
+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ if (!E100_RTS_GET(info))
+ seq_puts(m, "|RTS");
+ if (!E100_CTS_GET(info))
+ seq_puts(m, "|CTS");
+ if (!E100_DTR_GET(info))
+ seq_puts(m, "|DTR");
+ if (!E100_DSR_GET(info))
+ seq_puts(m, "|DSR");
+ if (!E100_CD_GET(info))
+ seq_puts(m, "|CD");
+ if (!E100_RI_GET(info))
+ seq_puts(m, "|RI");
+ seq_puts(m, "\n");
}
-int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver:%s\n",
- serial_version);
- for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+ for (i = 0; i < NR_PORTS; i++) {
if (!rs_table[i].enabled)
continue;
- l = line_info(page + len, &rs_table[i]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_line_info(m, &rs_table[i]);
}
#ifdef DEBUG_LOG_INCLUDED
for (i = 0; i < debug_log_pos; i++) {
- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_printf(m, "%-4i %lu.%lu ",
+ i, debug_log[i].time,
+ timer_data_to_ns(debug_log[i].timer_data));
+ seq_printf(m, debug_log[i].string, debug_log[i].value);
}
- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
- i, DEBUG_LOG_SIZE, begin+len);
+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
debug_log_pos = 0;
#endif
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, crisv10_proc_show, NULL);
}
+static const struct file_operations crisv10_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = crisv10_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+
/* Finally, routines used to initialize the serial driver. */
-static void
-show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO
- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ "ETRAX 100LX serial-driver %s, "
+ "(c) 2000-2004 Axis Communications AB\r\n",
&serial_version[11]); /* "$Revision: x.yy" */
}
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
- .tiocmset = rs_tiocmset
+ .tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &crisv10_proc_fops,
+#endif
};
-static int __init
-rs_init(void)
+static int __init rs_init(void)
{
int i;
struct e100_serial *info;
*
* This driver supports USB CDC WCM Device Management.
*
- * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2007-2009 Oliver Neukum
*
* Some code taken from cdc-acm.c
*
if (!buffer)
goto out;
- while (buflen > 0) {
+ while (buflen > 2) {
if (buffer [1] != USB_DT_CS_INTERFACE) {
dev_err(&intf->dev, "skipping garbage\n");
goto next_desc;
spin_lock_init(&desc->iuspin);
init_waitqueue_head(&desc->wait);
desc->wMaxCommand = maxcom;
+ /* this will be expanded and needed in hardware endianness */
desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
desc->intf = intf;
INIT_WORK(&desc->rxwork, wdm_rxwork);
- iface = &intf->altsetting[0];
+ rv = -EINVAL;
+ iface = intf->cur_altsetting;
+ if (iface->desc.bNumEndpoints != 1)
+ goto err;
ep = &iface->endpoint[0].desc;
- if (!ep || !usb_endpoint_is_int_in(ep)) {
- rv = -EINVAL;
+ if (!ep || !usb_endpoint_is_int_in(ep))
goto err;
- }
desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
usb_set_intfdata(intf, desc);
rv = usb_register_dev(intf, &wdm_class);
- dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
- intf->minor - WDM_MINOR_BASE);
if (rv < 0)
- goto err;
+ goto err3;
+ else
+ dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+ intf->minor - WDM_MINOR_BASE);
out:
return rv;
+err3:
+ usb_set_intfdata(intf, NULL);
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->bMaxPacketSize0,
+ desc->inbuf,
+ desc->response->transfer_dma);
err2:
usb_buffer_free(interface_to_usbdev(desc->intf),
desc->wMaxPacketSize,
if (size <= pool_max [i])
return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
}
- return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
+ return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
}
void hcd_buffer_free(
* - Gadget API (majority of optional features)
* - Suspend & Remote Wakeup
*/
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#define CAP_DEVICEADDR (0x014UL)
#define CAP_ENDPTLISTADDR (0x018UL)
#define CAP_PORTSC (0x044UL)
-#define CAP_DEVLC (0x0B4UL)
+#define CAP_DEVLC (0x084UL)
#define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL)
#define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
#define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL)
do {
dbg_event(_usb_addr(mEp), "ENABLE", 0);
+ mEp->qh[mEp->dir].ptr->cap = 0;
+
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->qh[mEp->dir].ptr->cap |= QH_IOS;
else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
static struct usb_gadget_driver fsg_driver;
static void close_backing_file(struct lun *curlun);
-static void close_all_backing_files(struct fsg_dev *fsg);
/*-------------------------------------------------------------------------*/
fsg->thread_task = NULL;
spin_unlock_irq(&fsg->lock);
- /* In case we are exiting because of a signal, unregister the
- * gadget driver and close the backing file. */
- if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+ /* If we are exiting because of a signal, unregister the
+ * gadget driver. */
+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
usb_gadget_unregister_driver(&fsg_driver);
- close_all_backing_files(fsg);
- }
/* Let the unbind and cleanup routines know the thread has exited */
complete_and_exit(&fsg->thread_notifier, 0);
}
}
-static void close_all_backing_files(struct fsg_dev *fsg)
-{
- int i;
-
- for (i = 0; i < fsg->nluns; ++i)
- close_backing_file(&fsg->luns[i]);
-}
-
static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf)
{
if (curlun->registered) {
device_remove_file(&curlun->dev, &dev_attr_ro);
device_remove_file(&curlun->dev, &dev_attr_file);
+ close_backing_file(curlun);
device_unregister(&curlun->dev);
curlun->registered = 0;
}
out:
fsg->state = FSG_STATE_TERMINATED; // The thread is dead
fsg_unbind(gadget);
- close_all_backing_files(fsg);
complete(&fsg->thread_notifier);
return rc;
}
/* Wait for the thread to finish up */
wait_for_completion(&fsg->thread_notifier);
- close_all_backing_files(fsg);
kref_put(&fsg->ref, fsg_release);
}
module_exit(fsg_cleanup);
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .probe = omap_udc_probe,
.remove = __exit_p(omap_udc_remove),
.suspend = omap_udc_suspend,
.resume = omap_udc_resume,
#endif
"%s\n", driver_desc,
use_dma ? " (dma)" : "");
- return platform_driver_register(&udc_driver);
+ return platform_driver_probe(&udc_driver, omap_udc_probe);
}
module_init(udc_init);
* already scheduled transactions
*/
if (125 < usecs) {
- int ufs = (usecs / 125) - 1;
+ int ufs = (usecs / 125);
int i;
for (i = uframe; i < (uframe + ufs) && i < 8; i++)
if (0 < tt_usecs[i]) {
#else
#define musb_suspend NULL
-#define musb_resume NULL
+#define musb_resume_early NULL
#endif
static struct platform_driver musb_driver = {
* Some code has been taken from tusb6010.c
* Copyrights for that are attributable to:
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This file is part of the Inventra Controller Driver for Linux.
* TUSB6010 USB 2.0 OTG Dual Role controller
*
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
*
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
*/
void otg_put_transceiver(struct otg_transceiver *x)
{
- put_device(x->dev);
+ if (x)
+ put_device(x->dev);
}
EXPORT_SYMBOL(otg_put_transceiver);
dbg("%s - usb_clear_halt", __func__);
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
priv = usb_get_serial_port_data(port);
spin_lock_irqsave(&priv->lock, flags);
priv->rdtodo = 0;
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /* setting to zero could cause data loss */
- if (tty)
- tty->low_latency = 1;
-
/* raise both lines and set termios */
spin_lock_irqsave(&priv->lock, flags);
priv->line_control = CONTROL_DTR | CONTROL_RTS;
termios->c_cflag
|= CS8; /* character size 8 bits */
- /*
- * Force low_latency on; otherwise the pushes are scheduled;
- * this is bad as it opens up the possibility of dropping bytes
- * on the floor. We don't want to drop bytes on the floor. :)
- */
- tty->low_latency = 1;
tty_encode_baud_rate(tty, 115200, 115200);
}
dbg("%s - port %d", __func__, port->number);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
dbg("%s - port %d", __func__, port->number);
- /* force low_latency on so that our tty_push actually forces the data
- through, otherwise it is scheduled, and with high data rates (like
- with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* clear the throttle flags */
spin_lock_irqsave(&port->lock, flags);
port->throttled = 0;
/* local variables */
static int debug;
-static int low_latency = 1; /* tty low latency flag, on by default */
-
static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
/* see if we've set up our endpoint info yet (can't set it up
in edge_startup as the structures were not set up at that time.) */
serial = port->serial;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
#define EDGE_READ_URB_STOPPING 1
#define EDGE_READ_URB_STOPPED 2
-#define EDGE_LOW_LATENCY 1
#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */
#define EDGE_OUT_BUF_SIZE 1024
static int debug;
-static int low_latency = EDGE_LOW_LATENCY;
static int closing_wait = EDGE_CLOSING_WAIT;
static int ignore_cpu_rev;
static int default_uart_mode; /* RS232 */
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
port_number = port->number - port->serial->minor;
switch (port_number) {
case 0:
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
priv->free_len += PACKET_SIZE;
}
- /*
- * Force low latency on. This will immediately push data to the line
- * discipline instead of queueing.
- */
-
if (tty) {
- tty->low_latency = 1;
/* FIXME: These two are bogus */
tty->raw = 1;
tty->real_raw = 1;
if (!buf_flow_init)
return -ENOMEM;
- if (tty)
- tty->low_latency = 1;
-
/* --1: Tell the modem to initialize (we think) From sniffs this is
* always the first thing that gets sent to the modem during
* opening of the device */
tty->termios->c_oflag = 0;
tty->termios->c_iflag = 0;
priv->termios_initialized = 1;
- tty->low_latency = 1;
priv->poll = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
-
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
if (tty) {
- tty->low_latency = 1;
/* Default to echo off and other sane device settings */
tty->termios->c_lflag = 0;
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
-
/* see if we've set up our endpoint info yet *
* (can't set it up in mos7720_startup as the *
* structures were not set up at that time.) */
/*
* Version Information
*/
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
/*
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ * - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL 0x0557
+#define ATENINTL_DEVICE_ID_UC2324 0x2011
+
/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* Check to see if we've set up our endpoint info yet *
* (can't set it up in mos7840_startup as the structures *
* were not set up at that time.) */
mos7840_set_port_private(serial->port[i], mos7840_port);
spin_lock_init(&mos7840_port->pool_lock);
- mos7840_port->port_num = ((serial->port[i]->number -
- (serial->port[i]->serial->minor)) +
- 1);
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = i + 1;
+ dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+ dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+ dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+ dbg ("serial->minor = %d", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
+ dbg ("mos7840_port %d = %p", i, mos7840_port);
+ if (mos7840_port) {
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+ mos7840_port->zombie = 1;
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+ usb_kill_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
+ }
mos7840_set_port_private(serial->port[i], NULL);
}
priv->port = port;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
usb_rcvbulkpipe(priv->udev,
usb_pipeout(urb->pipe), 0); */
}
- if (tty)
- tty->low_latency = 1;
-
option_send_setup(tty, port);
return 0;
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
val |= 0x02;
/* If composite device then properly report interface */
- if (serial->num_ports == 1)
+ if (serial->num_ports == 1) {
interface = sierra_calc_interface(serial);
+ /* Control message is sent only to interfaces with
+ * interrupt_in endpoints
+ */
+ if (port->interrupt_in_urb) {
+ /* send control message */
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ }
+ }
+
/* Otherwise the need to do non-composite mapping */
else {
if (port->bulk_out_endpointAddress == 2)
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
- }
- return usb_control_msg(serial->dev,
+ return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface,
NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ }
}
return 0;
}
}
- if (tty)
- tty->low_latency = 1;
-
sierra_send_setup(tty, port);
/* start up the interrupt endpoint if we have one */
#define TI_TRANSFER_TIMEOUT 2
-#define TI_DEFAULT_LOW_LATENCY 0
#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
/* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS 0
/* read urb states */
#define TI_READ_URB_RUNNING 0
/* module parameters */
static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
static unsigned int vendor_3410_count;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
- "TTY low_latency flag, 0=off, 1=on, default is off");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait,
"Maximum wait for data to drain in close, in .01 secs, default is 4000");
spin_lock_init(&tport->tp_lock);
tport->tp_uart_base_addr = (i == 0 ?
TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
- tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
tport->tp_closing_wait = closing_wait;
init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- if (tty)
- tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
port_number = port->number - port->serial->minor;
memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
return 0;
dbg("%s - %s", __func__, serial->type->description);
- serial->type->shutdown(serial);
-
/* return the minor range that this device had */
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
- for (i = 0; i < serial->num_ports; ++i)
- serial->port[i]->port.count = 0;
-
- /* the ports are cleaned up and released in port_release() */
- for (i = 0; i < serial->num_ports; ++i)
- if (serial->port[i]->dev.parent != NULL) {
- device_unregister(&serial->port[i]->dev);
- serial->port[i] = NULL;
- }
-
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
struct usb_serial *serial;
struct usb_serial_port *port;
unsigned int portNumber;
- int retval;
+ int retval = 0;
dbg("%s", __func__);
return -ENODEV;
}
+ mutex_lock(&serial->disc_mutex);
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
- if (!port) {
- retval = -ENODEV;
- goto bailout_kref_put;
- }
-
- if (port->serial->disconnected) {
+ if (!port || serial->disconnected)
retval = -ENODEV;
- goto bailout_kref_put;
- }
+ else
+ get_device(&port->dev);
+ /*
+ * Note: Our locking order requirement does not allow port->mutex
+ * to be acquired while serial->disc_mutex is held.
+ */
+ mutex_unlock(&serial->disc_mutex);
+ if (retval)
+ goto bailout_serial_put;
if (mutex_lock_interruptible(&port->mutex)) {
retval = -ERESTARTSYS;
- goto bailout_kref_put;
+ goto bailout_port_put;
}
++port->port.count;
goto bailout_mutex_unlock;
}
- retval = usb_autopm_get_interface(serial->interface);
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected)
+ retval = -ENODEV;
+ else
+ retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto bailout_module_put;
+
/* only call the device specific open if this
* is the first time the port is opened */
retval = serial->type->open(tty, port, filp);
if (retval)
goto bailout_interface_put;
+ mutex_unlock(&serial->disc_mutex);
}
mutex_unlock(&port->mutex);
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
+ mutex_unlock(&serial->disc_mutex);
module_put(serial->type->driver.owner);
bailout_mutex_unlock:
port->port.count = 0;
tty->driver_data = NULL;
tty_port_tty_set(&port->port, NULL);
mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+ put_device(&port->dev);
+bailout_serial_put:
usb_serial_put(serial);
return retval;
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial;
+ struct module *owner;
+ int count;
if (!port)
return;
dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->mutex);
+ serial = port->serial;
+ owner = serial->type->driver.owner;
if (port->port.count == 0) {
mutex_unlock(&port->mutex);
* this before we drop the port count. The call is protected
* by the port mutex
*/
- port->serial->type->close(tty, port, filp);
+ serial->type->close(tty, port, filp);
if (port->port.count == (port->console ? 2 : 1)) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
}
}
- if (port->port.count == 1) {
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected)
- usb_autopm_put_interface(port->serial->interface);
- mutex_unlock(&port->serial->disc_mutex);
- module_put(port->serial->type->driver.owner);
- }
--port->port.count;
-
+ count = port->port.count;
mutex_unlock(&port->mutex);
- usb_serial_put(port->serial);
+ put_device(&port->dev);
+
+ /* Mustn't dereference port any more */
+ if (count == 0) {
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
+ }
+ usb_serial_put(serial);
+
+ /* Mustn't dereference serial any more */
+ if (count == 0)
+ module_put(owner);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
static void port_free(struct usb_serial_port *port)
{
+ /*
+ * Stop all the traffic before cancelling the work, so that
+ * nobody will restart it by calling usb_serial_port_softint.
+ */
kill_traffic(port);
+ cancel_work_sync(&port->work);
+
usb_free_urb(port->read_urb);
usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
- flush_scheduled_work(); /* port->work */
kfree(port);
}
usb_set_intfdata(interface, NULL);
/* must set a flag, to signal subdrivers */
serial->disconnected = 1;
+ mutex_unlock(&serial->disc_mutex);
+
+ /* Unfortunately, many of the sub-drivers expect the port structures
+ * to exist when their shutdown method is called, so we have to go
+ * through this awkward two-step unregistration procedure.
+ */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
tty_kref_put(tty);
}
kill_traffic(port);
+ cancel_work_sync(&port->work);
+ device_del(&port->dev);
+ }
+ }
+ serial->type->shutdown(serial);
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port) {
+ put_device(&port->dev);
+ serial->port[i] = NULL;
}
}
+
/* let the last holder of this object
* cause it to be cleaned up */
- mutex_unlock(&serial->disc_mutex);
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+ "TGE",
+ "Digital MP3 Audio Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
font->charcount = vga_512_chars ? 512 : 256;
if (!font->data)
return 0;
- return vgacon_do_font_op(&state, font->data, 0, 0);
+ return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
}
#else
P3
-145 113
+# Standard 224-color Linux logo
+80 80
255
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 3 4 4 6 7 7
-8 10 10 8 10 10 6 8 8 6 7 7 3 4 4 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 4 5 5 17 18 17
-27 29 28 35 37 36 40 43 41 43 45 43 40 43 41 37 39 37
-32 34 33 27 30 29 23 25 24 17 21 21 15 18 18 12 15 15
-11 13 13 8 10 10 6 7 7 3 4 4 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 13 13 13 32 34 33 49 51 48 60 60 56 58 59 55
-55 57 54 55 56 53 49 51 48 43 45 43 39 40 39 33 37 35
-28 31 30 23 27 26 20 23 23 17 20 20 14 17 17 13 16 16
-11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 6 7 7
-2 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 12 15 15
-12 15 15 8 9 9 2 3 3 0 0 0 1 1 1 25 27 26
-55 56 53 68 70 65 65 66 61 65 66 61 63 64 60 63 64 60
-58 59 55 51 52 50 47 48 46 41 42 42 35 37 36 30 32 31
-26 28 27 20 24 24 18 22 22 16 19 19 14 17 17 13 16 16
-12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
-8 9 9 6 8 8 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 6 7 7 20 24 24 23 27 26
-23 27 26 18 22 22 11 13 13 23 24 24 61 63 57 72 73 67
-72 73 67 68 70 65 68 70 65 68 70 65 63 64 60 58 59 55
-55 56 53 47 48 46 41 42 42 35 37 36 30 32 31 26 28 27
-20 24 24 18 22 22 16 20 20 15 19 19 14 17 17 13 16 16
-12 15 15 12 15 15 11 14 14 10 13 13 10 12 12 9 11 11
-8 10 10 8 9 9 7 9 9 6 7 7 1 2 2 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 4 5 5 5 6 5 4 5 5
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 15 19 19 40 41 39 53 55 47
-33 36 34 27 30 29 51 52 50 72 73 67 72 73 67 72 73 67
-72 73 67 68 70 65 68 70 65 63 64 60 58 59 55 51 52 50
-47 48 46 40 43 41 33 37 35 30 32 31 26 28 27 20 24 24
-18 22 22 17 21 21 16 19 19 14 18 18 14 17 17 13 17 17
-13 16 16 12 15 15 12 15 15 11 14 14 10 13 13 10 12 12
-9 11 11 8 10 10 8 9 9 7 9 9 6 8 8 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-2 2 2 6 8 8 10 12 12 10 12 12 10 12 12 10 12 12
-6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 20 23 23 71 71 57 131 127 93
-115 113 82 63 64 60 72 73 67 72 73 67 72 73 67 72 73 67
-68 70 65 65 66 61 61 63 57 55 57 54 49 51 48 43 45 43
-39 40 39 33 36 34 28 31 30 23 27 26 20 24 24 20 23 23
-17 21 21 16 20 20 15 19 19 15 18 18 14 18 18 14 17 17
-13 17 17 13 16 16 12 15 15 12 15 15 11 14 14 10 13 13
-10 12 12 9 11 11 8 10 10 7 9 9 7 9 9 6 8 8
-4 5 5 0 0 0 0 0 0 0 0 0 1 1 1 6 7 7
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-10 12 12 3 4 4 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 18 22 22 71 71 57 144 139 99
-84 83 72 68 70 65 72 73 67 72 73 67 68 70 65 65 66 61
-63 64 60 55 57 54 51 52 50 47 48 46 40 43 41 35 37 36
-30 32 31 27 29 28 23 27 26 20 24 24 18 22 22 17 21 21
-16 20 20 15 19 19 15 19 19 15 19 19 15 18 18 14 18 18
-14 17 17 13 17 17 13 16 16 12 15 15 12 15 15 11 14 14
-10 13 13 9 12 12 9 11 11 8 10 10 7 9 9 6 8 8
-6 8 8 3 4 4 0 0 0 2 2 2 8 10 10 10 12 12
-10 12 12 10 12 12 11 13 13 36 38 35 61 61 53 48 49 45
-10 12 12 7 9 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 15 19 19 61 61 53 84 83 72
-68 70 65 72 73 67 68 70 65 68 70 65 63 64 60 58 59 55
-51 52 50 47 48 46 41 42 42 37 39 37 32 35 33 28 31 30
-23 27 26 20 24 24 20 23 23 18 22 22 17 21 21 17 21 21
-17 21 21 17 21 21 17 20 20 16 20 20 16 20 20 16 19 19
-15 18 18 14 18 18 13 17 17 13 16 16 12 15 15 12 15 15
-11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 7 9 9
-6 8 8 6 8 8 5 6 5 9 11 11 10 12 12 10 12 12
-19 20 18 82 81 62 149 145 103 160 154 106 142 137 94 96 95 69
-10 12 12 10 12 12 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 10 12 12 44 46 43 68 70 65
-72 73 67 68 70 65 68 70 65 63 64 60 55 57 54 49 51 48
-43 45 43 39 40 39 33 37 35 30 32 31 26 28 27 23 27 26
-20 24 24 18 22 22 18 22 22 18 22 22 18 22 22 20 23 23
-20 24 24 23 25 24 23 25 24 22 24 23 20 23 23 18 22 22
-17 20 20 15 19 19 15 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 11 13 13 10 12 12 9 11 11 8 10 10 8 9 9
-7 9 9 7 9 9 10 12 12 10 12 12 10 12 12 71 71 57
-164 159 111 186 182 128 186 182 128 171 165 117 151 147 98 96 95 69
-10 12 12 10 12 12 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 8 10 10 63 64 60 68 70 65
-72 73 67 68 70 65 63 64 60 55 57 54 47 48 46 40 43 41
-33 37 35 30 32 31 27 29 28 23 27 26 20 24 24 20 23 23
-18 22 22 18 22 22 20 23 22 21 25 23 23 27 26 27 29 28
-28 31 30 31 33 31 31 33 31 31 33 31 28 31 30 26 28 27
-23 25 24 20 23 22 16 20 20 15 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
-10 12 12 10 13 13 10 12 12 12 14 14 96 95 69 165 161 109
-186 182 128 192 187 134 192 187 134 176 171 126 160 154 106 103 101 77
-10 12 12 10 12 12 5 6 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 35 37 36 68 70 65 72 73 67
-68 70 65 65 66 61 58 59 55 49 51 48 40 43 41 33 37 35
-28 31 30 23 27 26 20 24 24 20 23 23 18 22 22 18 22 22
-18 22 22 20 23 23 23 27 26 27 30 29 32 35 33 37 39 37
-40 43 41 44 46 43 46 47 43 44 46 43 40 43 41 36 38 35
-31 33 31 27 29 28 22 24 23 17 21 21 15 18 18 14 17 17
-13 16 16 12 15 15 11 14 14 11 14 14 11 13 13 13 16 16
-13 16 16 11 14 14 10 12 12 79 78 62 142 137 94 164 159 111
-178 174 128 192 187 134 192 187 134 176 171 126 160 154 106 96 95 69
-10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 55 57 54 68 70 65 72 73 67
-68 70 65 63 64 60 55 56 53 43 45 43 35 37 36 28 31 30
-23 27 26 20 24 24 18 22 22 17 21 21 17 21 21 17 21 21
-20 24 24 25 27 26 31 33 31 38 39 37 46 47 43 53 55 47
-61 61 53 66 65 55 66 65 55 66 65 55 61 61 53 53 55 47
-46 47 43 37 39 37 30 33 30 24 26 24 17 21 21 15 18 18
-13 17 17 12 15 15 12 15 15 13 16 16 14 18 18 14 18 18
-14 17 17 12 15 15 30 31 28 118 116 76 134 131 96 160 154 106
-174 170 121 178 174 128 178 174 128 171 165 117 151 147 98 96 95 69
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 63 64 60 68 70 65 68 70 65
-65 66 61 58 59 55 49 51 48 39 40 39 30 32 31 23 27 26
-20 24 24 18 22 22 17 21 21 16 20 20 17 21 21 20 23 23
-25 27 26 32 35 33 43 44 41 53 55 47 66 65 55 75 75 61
-82 81 62 84 83 72 87 86 72 87 86 72 82 81 62 75 75 61
-66 65 55 53 55 47 40 41 39 31 33 31 23 25 24 17 20 20
-14 18 18 13 16 16 12 15 15 12 15 15 13 17 17 14 18 18
-14 18 18 13 16 16 46 47 43 96 95 69 125 122 87 142 137 94
-160 154 106 165 161 109 164 159 111 155 149 109 142 137 94 75 75 61
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 60 60 56 68 70 65 68 70 65
-63 64 60 55 57 54 46 47 45 35 37 36 27 30 29 23 25 24
-18 22 22 17 21 21 16 20 20 17 21 21 18 22 22 23 27 26
-31 33 31 43 44 41 55 56 53 71 71 57 84 83 72 92 91 72
-103 101 77 92 91 72 82 81 62 82 81 62 87 86 72 92 91 72
-84 83 72 71 71 57 55 56 53 43 44 41 30 33 30 22 24 23
-16 19 19 14 17 17 12 15 15 12 15 15 13 16 16 14 18 18
-14 18 18 14 17 17 43 44 41 82 81 62 118 116 76 125 122 87
-142 137 94 144 139 99 144 139 99 134 131 96 118 116 76 53 55 47
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 47 48 46 63 64 60 63 64 60
-55 57 54 49 51 48 40 43 41 32 34 33 26 28 27 20 24 24
-18 22 22 16 20 20 16 20 20 17 21 21 20 24 24 28 31 30
-40 41 39 53 55 47 75 75 61 90 89 73 87 86 72 48 49 45
-14 14 13 2 2 2 1 2 2 1 1 1 1 1 1 2 2 2
-19 20 18 43 44 41 66 65 55 53 55 47 38 39 37 26 28 27
-18 22 22 14 18 18 13 16 16 12 15 15 12 15 15 13 17 17
-14 18 18 14 18 18 30 31 28 66 65 55 96 95 69 103 101 77
-118 116 76 118 116 76 118 116 76 118 116 76 103 101 77 36 38 35
-10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 28 31 30 55 57 54 51 52 50
-49 51 48 41 42 42 35 37 36 28 31 30 23 27 26 20 23 23
-17 21 21 16 20 20 16 20 20 18 22 22 23 27 26 33 36 34
-48 49 45 71 71 57 82 81 62 43 44 41 8 9 9 6 7 7
-6 7 7 6 7 7 6 7 7 5 6 5 4 5 5 3 4 4
-2 3 3 1 2 2 4 5 4 36 38 35 48 49 45 32 35 33
-21 25 23 16 19 19 13 17 17 12 15 15 12 15 15 13 16 16
-14 18 18 14 18 18 16 18 16 36 38 35 61 61 53 82 81 62
-96 95 69 96 95 69 96 95 69 96 95 69 79 78 62 19 20 18
-10 12 12 10 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 13 13 46 47 45 43 45 43
-40 43 41 35 37 36 30 32 31 23 27 26 20 24 24 18 22 22
-17 21 21 16 20 20 17 21 21 20 23 23 27 30 29 40 41 39
-61 61 53 53 55 47 16 17 16 9 11 11 10 12 12 10 12 12
-10 12 12 10 12 12 10 12 12 9 11 11 8 10 10 8 9 9
-6 8 8 5 6 5 4 5 5 2 3 3 19 20 18 38 39 37
-26 28 27 17 21 21 14 17 17 13 16 16 12 15 15 12 15 15
-13 17 17 14 18 18 12 15 15 13 12 7 30 31 28 46 47 43
-53 55 47 66 65 55 66 65 55 53 55 47 36 38 35 10 12 12
-10 12 12 10 12 12 2 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 1 33 37 35 35 37 36
-32 35 33 28 31 30 23 27 26 20 24 24 18 22 22 17 21 21
-16 20 20 16 20 20 17 21 21 21 25 23 31 33 31 44 46 43
-31 33 31 11 13 13 12 14 14 12 15 15 13 16 16 14 17 17
-14 17 17 14 17 17 14 17 17 13 16 16 12 15 15 12 14 14
-11 13 13 9 11 11 8 10 10 6 8 8 4 5 5 17 18 17
-30 33 30 20 23 22 15 18 18 13 16 16 12 15 15 12 14 14
-13 16 16 14 17 17 14 18 18 11 12 11 7 7 5 16 17 12
-21 22 20 30 31 28 25 27 25 21 22 20 14 14 13 10 12 12
-10 12 12 9 11 11 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 18 22 22 27 30 29
-27 29 28 40 41 39 53 55 47 53 55 47 53 55 47 46 47 43
-25 27 25 16 20 20 17 21 21 23 25 24 31 33 31 20 20 20
-12 15 15 14 17 17 15 19 19 16 20 20 17 21 21 18 22 22
-18 22 22 18 22 22 18 22 22 17 21 21 17 21 21 16 19 19
-15 18 18 13 16 16 12 15 15 10 12 12 8 10 10 6 8 8
-21 22 21 22 24 23 15 19 19 13 17 17 13 16 16 12 15 15
-12 15 15 13 17 17 14 18 18 14 18 18 13 15 14 10 9 6
-7 7 5 7 7 5 7 7 5 9 11 11 10 12 12 10 12 12
-10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 82 81 62
-118 116 76 118 116 76 161 156 96 161 156 96 161 156 96 118 116 76
-118 116 76 96 95 69 53 55 47 22 24 23 14 17 17 13 16 16
-15 19 19 17 21 21 18 22 22 20 24 24 20 24 24 23 27 26
-23 27 26 23 27 26 23 27 26 23 27 26 23 27 26 20 24 24
-20 23 23 17 21 21 16 19 19 14 17 17 12 15 15 10 12 12
-9 11 11 20 23 22 16 19 19 14 17 17 13 16 16 12 15 15
-11 14 14 13 16 16 14 17 17 14 18 18 14 17 17 12 15 15
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-9 11 11 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 53 55 47 161 156 96
-161 156 96 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 96 95 69 21 22 20 16 19 19
-18 22 22 20 24 24 23 27 26 23 27 26 26 28 27 27 30 29
-27 30 29 18 22 22 12 14 14 8 10 10 9 11 11 17 21 21
-23 27 26 23 27 26 20 24 24 18 22 22 16 20 20 14 17 17
-12 14 14 14 17 17 16 20 20 14 17 17 13 17 17 13 16 16
-12 15 15 12 15 15 13 17 17 14 18 18 14 17 17 13 16 16
-11 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 12 7 118 116 76 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 30 31 28
-20 24 24 23 27 26 27 30 29 28 31 30 30 32 31 23 27 26
-16 19 19 17 21 21 12 15 15 9 11 11 10 12 12 9 11 11
-20 24 24 28 31 30 26 28 27 23 27 26 20 24 24 17 21 21
-15 19 19 13 16 16 16 19 19 14 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 13 16 16 14 17 17 14 18 18 14 17 17
-12 15 15 10 12 12 10 12 12 10 12 12 10 12 12 8 9 9
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 82 81 62 161 156 96 230 229 82
-230 229 82 233 233 100 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 118 116 76
-27 29 28 27 30 29 30 32 31 30 32 31 23 27 26 20 24 24
-26 28 27 17 21 21 6 7 7 72 73 67 145 141 105 15 15 15
-14 17 17 33 37 35 30 32 31 28 31 30 26 28 27 23 27 26
-20 23 23 16 20 20 15 19 19 14 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 12 15 15 13 17 17 14 18 18 14 17 17
-13 16 16 11 13 13 10 12 12 10 12 12 9 11 11 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 16 17 12 161 156 96 230 229 82 230 229 82
-243 242 120 235 234 117 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-82 81 62 28 31 30 28 31 30 27 30 29 28 31 30 30 32 31
-33 37 35 13 16 16 3 3 3 105 104 92 210 208 158 12 14 14
-17 21 21 33 37 35 33 37 35 32 35 33 30 32 31 27 30 29
-23 27 26 20 23 23 17 20 20 15 18 18 14 18 18 13 17 17
-13 16 16 12 15 15 11 14 14 13 16 16 14 17 17 14 18 18
-13 17 17 12 15 15 10 12 12 10 12 12 3 4 4 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 96 95 69 230 229 82 230 229 82 244 244 132
-241 241 143 243 242 120 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-161 156 96 46 47 43 32 35 33 33 37 35 33 37 35 33 37 35
-40 43 41 23 27 26 1 1 1 2 2 2 24 26 24 14 17 17
-23 27 26 33 37 35 33 37 35 33 37 35 33 37 35 30 32 31
-27 30 29 23 27 26 20 23 23 15 18 18 14 18 18 14 17 17
-13 16 16 12 15 15 11 14 14 12 15 15 13 17 17 14 17 17
-14 17 17 13 16 16 11 13 13 6 8 8 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 16 17 12 161 156 96 230 229 82 235 234 117 239 239 170
-239 239 170 236 236 101 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 118 116 76 33 37 35 33 37 35 37 39 37 37 39 37
-43 45 43 49 51 48 20 24 24 8 10 10 17 20 20 35 37 36
-33 37 35 40 43 41 37 39 37 35 37 36 33 37 35 33 37 35
-30 32 31 27 30 29 23 27 26 15 19 19 14 18 18 14 17 17
-13 17 17 13 16 16 12 15 15 11 14 14 13 16 16 14 17 17
-14 17 17 13 17 17 11 14 14 4 5 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 96 95 69 230 229 82 230 229 82 239 239 170 251 251 187
-241 241 143 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 36 38 35 33 37 35 33 37 35 33 37 35
-37 39 37 47 48 46 55 57 54 55 57 54 49 51 48 43 45 43
-43 45 43 43 45 43 40 43 41 40 43 41 37 39 37 33 37 35
-33 37 35 28 31 30 26 28 27 16 20 20 15 18 18 14 18 18
-14 17 17 13 16 16 12 15 15 11 14 14 12 15 15 13 17 17
-14 17 17 14 17 17 8 10 10 5 7 7 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 17 12 230 229 82 230 229 82 243 242 120 251 251 187 251 251 187
-246 246 123 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 66 65 55 30 32 31 32 35 33 33 37 35
-33 37 35 37 39 37 40 43 41 47 48 46 49 51 48 51 52 50
-55 57 54 55 57 54 51 52 50 47 48 46 43 45 43 39 40 39
-33 37 35 30 32 31 26 28 27 17 21 21 15 19 19 14 18 18
-14 17 17 13 16 16 12 15 15 12 14 14 11 14 14 13 16 16
-14 17 17 12 15 15 7 9 9 6 8 8 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-96 95 69 230 229 82 230 229 82 239 239 170 251 251 187 239 239 170
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 96 95 69 27 30 29 28 31 30 30 32 31
-33 37 35 40 43 41 46 47 45 55 57 54 63 64 60 72 73 67
-72 73 67 72 73 67 72 73 67 65 66 61 55 57 54 47 48 46
-39 40 39 32 35 33 27 30 29 17 21 21 15 19 19 15 18 18
-14 18 18 13 17 17 13 16 16 12 15 15 11 14 14 12 14 14
-13 16 16 9 11 11 7 9 9 9 11 11 66 65 55 115 113 82
-21 22 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 12 7
-230 229 82 230 229 82 236 236 101 251 251 187 251 251 187 246 246 123
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 118 116 76 23 27 26 26 28 27 32 35 33
-51 52 50 90 89 73 110 109 94 145 141 105 168 163 120 177 172 135
-177 172 135 188 184 146 188 184 146 181 176 137 194 191 148 188 184 146
-184 179 149 188 184 146 188 184 146 156 151 111 177 172 135 181 176 137
-177 172 135 168 163 120 168 163 120 158 153 112 156 151 111 158 153 112
-156 151 111 158 153 112 177 172 135 188 184 146 188 184 146 194 189 146
-36 38 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 82 81 62
-230 229 82 230 229 82 244 244 132 251 251 187 244 244 132 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 82 81 62
-96 95 69 230 229 82 181 178 103 110 109 94 156 151 111 188 184 146
-188 184 146 197 193 154 188 184 146 184 181 136 188 184 146 168 163 120
-168 163 120 178 174 128 156 151 111 158 153 112 174 170 121 156 151 111
-156 151 111 158 153 112 156 151 111 168 163 120 178 174 128 181 176 137
-176 171 126 178 174 128 184 181 136 176 171 126 178 174 128 184 181 136
-176 171 126 178 174 128 184 181 136 164 159 111 155 149 109 96 95 69
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 2 2 1 161 156 96
-230 229 82 230 229 82 244 244 132 244 244 132 236 236 101 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 46 47 43 82 81 62
-158 153 112 197 193 154 194 189 146 184 181 136 188 184 146 168 163 120
-156 151 111 137 133 100 131 127 93 137 133 100 137 133 100 158 153 112
-121 119 87 137 133 100 156 151 111 145 141 105 99 98 80 84 83 72
-63 64 60 52 53 49 40 43 41 33 36 34 36 38 35 36 38 35
-38 39 37 43 44 41 43 44 41 46 47 43 48 49 45 48 49 45
-46 47 43 36 38 35 30 31 28 19 20 18 6 7 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 230 229 82
-230 229 82 230 229 82 246 246 123 236 236 101 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 53 55 47 121 119 87
-176 171 126 171 165 117 161 156 96 82 81 62 53 55 47 33 37 35
-39 40 39 63 64 60 99 98 80 121 119 87 137 133 100 177 172 135
-176 171 126 184 181 136 131 127 93 131 127 93 110 109 94 84 83 72
-51 52 50 39 40 39 27 29 28 18 22 22 16 19 19 15 19 19
-15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 11 14 14
-10 13 13 9 12 12 9 11 11 8 9 9 7 9 9 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
-230 229 82 230 229 82 236 236 101 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 96 95 69 71 71 57
-36 38 35 118 116 76 118 116 76 12 15 15 15 18 18 20 24 24
-33 37 35 55 56 53 84 83 72 110 109 94 145 141 105 110 109 94
-168 163 120 121 119 87 156 151 111 131 127 93 87 86 72 61 63 57
-47 48 46 28 31 30 18 22 22 15 19 19 15 18 18 15 19 19
-15 19 19 14 18 18 14 17 17 13 17 17 13 16 16 12 15 15
-11 13 13 10 12 12 9 11 11 8 10 10 7 9 9 3 3 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 0 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-161 156 96 230 229 82 118 116 76 11 14 14 14 17 17 18 22 22
-27 30 29 40 43 41 60 60 56 84 83 72 105 104 92 110 109 94
-110 109 94 110 109 94 99 98 80 90 89 73 68 70 65 47 48 46
-32 34 33 23 25 24 20 23 23 17 21 21 15 19 19 14 17 17
-15 19 19 15 18 18 14 18 18 13 17 17 13 16 16 12 15 15
-11 14 14 10 12 12 9 11 11 8 10 10 7 9 9 4 5 5
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 11 13 13 13 16 16 15 19 19
-20 24 24 30 32 31 40 43 41 51 52 50 63 64 60 72 73 67
-65 66 61 65 66 61 65 66 61 55 57 54 46 47 45 33 37 35
-27 29 28 20 24 24 17 21 21 16 20 20 16 20 20 15 19 19
-15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 10 13 13 9 12 12 8 10 10 7 9 9 6 7 7
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 53 55 47 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-161 156 96 118 116 76 53 55 47 10 13 13 12 15 15 14 17 17
-17 20 20 20 24 24 27 29 28 32 34 33 37 39 37 40 43 41
-43 45 43 41 42 42 35 37 36 30 32 31 28 31 30 23 27 26
-20 23 23 17 21 21 16 20 20 16 20 20 16 20 20 16 19 19
-15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 10 12 12
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 82 81 62 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
-118 116 76 82 81 62 13 14 12 10 13 13 12 15 15 13 17 17
-15 19 19 16 20 20 20 23 23 20 24 24 23 27 26 26 28 27
-26 28 27 26 28 27 23 27 26 18 22 22 20 23 23 17 21 21
-17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 19 19
-15 19 19 15 19 19 15 18 18 14 17 17 13 17 17 13 16 16
-12 15 15 12 14 14 12 14 14 12 14 14 12 14 14 23 24 24
-6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 118 116 76
-71 71 57 13 14 12 9 12 12 10 13 13 12 15 15 13 17 17
-15 18 18 15 19 19 16 20 20 17 21 21 17 21 21 18 22 22
-18 22 22 18 22 22 17 21 21 16 19 19 15 18 18 14 18 18
-16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 15 19 19 15 18 18 14 18 18 16 20 20 23 25 24
-17 21 21 25 27 26 47 48 46 47 48 46 51 52 50 72 73 67
-33 36 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 161 156 96 118 116 76 118 116 76 46 47 43
-9 11 11 9 11 11 10 12 12 11 13 13 12 15 15 14 17 17
-15 18 18 15 19 19 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 16 20 20 20 24 24 55 56 53 32 34 33 84 83 72
-90 89 73 110 109 94 110 109 94 105 104 92 110 109 94 110 109 94
-72 73 67 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 96 95 69 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 82 81 62 16 17 12 9 11 11
-9 11 11 9 12 12 10 13 13 12 14 14 13 16 16 14 18 18
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 19 19 33 36 34 99 98 80 156 151 111 145 141 105 184 179 149
-168 163 120 184 179 149 177 172 135 156 151 111 145 141 105 110 109 94
-90 89 73 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 71 71 57 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 230 229 82 230 229 82 230 229 82 161 156 96
-118 116 76 82 81 62 30 31 28 9 11 11 9 11 11 9 11 11
-10 12 12 10 13 13 11 14 14 13 16 16 14 17 17 15 18 18
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-18 22 22 58 59 55 137 133 100 197 193 154 214 212 158 210 208 158
-197 193 154 184 179 149 184 179 149 137 133 100 110 109 94 99 98 80
-84 83 72 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-161 156 96 161 156 96 161 156 96 161 156 96 118 116 76 71 71 57
-21 22 20 12 14 14 11 13 13 10 12 12 10 12 12 10 13 13
-11 13 13 12 15 15 13 16 16 14 17 17 14 18 18 15 19 19
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 17 21 21
-23 27 26 84 83 72 184 179 149 251 251 187 210 208 158 184 179 149
-184 179 149 156 151 111 110 109 94 84 83 72 63 64 60 51 52 50
-18 22 22 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
-161 156 96 161 156 96 118 116 76 53 55 47 20 23 22 16 19 19
-13 16 16 12 15 15 12 14 14 11 14 14 11 14 14 11 14 14
-12 15 15 13 16 16 14 17 17 15 19 19 16 20 20 17 21 21
-23 27 26 18 22 22 20 24 24 23 27 26 30 32 31 17 21 21
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-23 27 26 33 37 35 137 133 100 156 151 111 158 153 112 105 104 92
-105 104 92 68 70 65 39 40 39 18 22 22 12 14 14 12 15 15
-9 11 11 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 118 116 76
-118 116 76 66 65 55 43 45 43 32 34 33 25 27 26 20 23 22
-17 20 20 15 18 18 14 17 17 15 18 18 13 16 16 14 17 17
-14 18 18 16 20 20 32 34 33 55 57 54 58 59 55 72 73 67
-105 104 92 55 57 54 65 66 61 63 64 60 40 43 41 33 37 35
-41 42 42 20 24 24 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-17 21 21 26 28 27 30 32 31 35 37 36 68 70 65 39 40 39
-23 27 26 15 18 18 13 16 16 11 14 14 9 12 12 8 10 10
-7 9 9 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
-230 229 82 230 229 82 230 229 82 96 95 69 30 31 28 49 51 48
-90 89 73 68 70 65 55 57 54 47 48 46 47 48 46 43 45 43
-32 34 33 43 45 43 43 45 43 23 27 26 25 27 26 40 43 41
-40 43 41 90 89 73 110 109 94 145 141 105 156 151 111 156 151 111
-184 179 149 184 179 149 177 172 135 184 179 149 137 133 100 84 83 72
-105 104 92 63 64 60 49 51 48 47 48 46 28 31 30 18 22 22
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 15 19 19 15 19 19 15 19 19 18 22 22 15 19 19
-13 16 16 12 15 15 11 14 14 10 13 13 9 12 12 9 11 11
-8 10 10 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-30 31 28 230 229 82 71 71 57 2 2 1 0 0 0 58 59 55
-105 104 92 84 83 72 65 66 61 84 83 72 110 109 94 110 109 94
-145 141 105 105 104 92 110 109 94 110 109 94 84 83 72 110 109 94
-158 153 112 197 193 154 197 193 154 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 197 193 154
-197 193 154 184 179 149 145 141 105 137 133 100 105 104 92 47 48 46
-20 23 23 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 19 19 15 19 19 15 19 19 14 18 18 14 17 17
-13 17 17 13 16 16 12 14 14 12 14 14 13 13 13 13 13 13
-13 13 13 12 12 12 10 10 9 6 7 7 2 2 2 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 65 66 61
-105 104 92 84 83 72 84 83 72 110 109 94 184 179 149 210 208 158
-210 208 158 210 208 158 214 212 158 197 193 154 214 212 158 210 208 158
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 251 251 187 184 179 149 84 83 72
-26 28 27 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
-13 17 17 13 16 16 15 15 15 14 14 13 14 14 13 14 14 13
-13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 73 67
-105 104 92 99 98 80 84 83 72 99 98 80 177 172 135 197 193 154
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 214 212 158 197 193 154 99 98 80
-23 27 26 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
-14 17 17 16 16 16 16 16 16 16 16 16 15 15 15 14 14 13
-14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 84 83 72
-110 109 94 99 98 80 72 73 67 63 64 60 99 98 80 177 172 135
-184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 210 208 158 184 179 149 177 172 135 110 109 94 33 37 35
-17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 19 19 14 18 18
-15 18 18 18 19 18 18 19 18 17 17 17 16 16 16 15 15 15
-14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
-10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 105 104 92
-108 107 93 99 98 80 72 73 67 63 64 60 51 52 50 87 86 72
-105 104 92 110 109 94 108 107 93 156 151 111 184 179 149 184 179 149
-197 193 154 197 193 154 197 193 154 184 179 149 184 179 149 177 172 135
-197 193 154 156 151 111 177 172 135 184 179 149 168 163 120 137 133 100
-145 141 105 110 109 94 99 98 80 47 48 46 55 57 54 15 19 19
-16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-17 20 20 17 21 21 16 20 20 16 19 19 15 19 19 16 19 19
-20 20 20 21 22 21 20 20 20 19 20 19 18 19 18 16 16 16
-15 15 15 14 14 13 13 13 13 13 13 13 12 12 12 12 12 12
-12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 58 59 55 110 109 94
-105 104 92 90 89 73 72 73 67 55 57 54 43 45 43 39 40 39
-43 45 43 46 47 45 43 45 43 68 70 65 65 66 61 63 64 60
-108 107 93 72 73 67 105 104 92 90 89 73 72 73 67 40 43 41
-72 73 67 68 70 65 68 70 65 58 59 55 63 64 60 49 51 48
-43 45 43 33 36 34 27 30 29 20 24 24 16 20 20 15 19 19
-15 19 19 15 19 19 15 19 19 16 19 19 16 20 20 16 20 20
-17 21 21 20 24 24 20 23 22 17 21 21 17 20 20 20 20 20
-21 22 21 21 22 21 21 22 21 21 22 21 20 20 20 18 19 18
-16 16 16 15 15 15 13 13 13 13 13 13 12 12 12 12 12 12
-12 12 12 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 21 22 21 110 109 94 110 109 94
-105 104 92 84 83 72 68 70 65 51 52 50 41 42 42 33 37 35
-28 31 30 23 27 26 20 23 23 18 22 22 17 20 20 25 27 26
-26 28 27 27 30 29 25 27 26 20 23 23 23 27 26 30 32 31
-20 24 24 17 21 21 18 22 22 15 19 19 26 28 27 20 23 23
-14 18 18 15 19 19 15 18 18 15 19 19 15 19 19 15 19 19
-15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 16 19 19
-16 20 20 22 24 23 24 26 24 22 24 23 20 23 22 22 24 23
-24 26 24 24 26 24 23 24 24 22 24 23 21 22 21 19 20 19
-17 17 17 15 15 15 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 2 2 2 99 98 80 110 109 94 108 107 93
-105 104 92 84 83 72 63 64 60 49 51 48 39 40 39 32 34 33
-27 30 29 23 25 24 20 23 23 17 20 20 15 19 19 14 18 18
-14 17 17 13 17 17 13 17 17 13 17 17 13 17 17 13 17 17
-14 17 17 14 17 17 14 17 17 14 17 17 14 17 17 14 17 17
-14 18 18 14 18 18 14 18 18 14 18 18 15 18 18 15 19 19
-15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 15 19 19
-15 19 19 17 21 21 27 29 28 26 28 27 25 27 26 25 27 26
-27 29 28 27 29 28 26 28 27 24 26 24 21 22 21 20 20 20
-18 19 18 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 51 52 50 110 109 94 110 109 94 105 104 92
-90 89 73 72 73 67 55 57 54 43 45 43 35 37 36 30 32 31
-26 28 27 20 24 24 17 21 21 16 19 19 15 18 18 14 17 17
-13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
-14 17 17 14 17 17 14 17 17 14 18 18 14 18 18 14 18 18
-15 18 18 15 18 18 15 19 19 15 19 19 15 19 19 15 19 19
-15 19 19 15 19 19 27 29 28 32 34 33 28 31 30 27 29 28
-30 32 31 30 32 31 30 31 28 26 28 27 23 24 24 21 22 21
-19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 3 3 3 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 10 10 9 108 107 93 110 109 94 108 107 93 99 98 80
-84 83 72 63 64 60 49 51 48 40 43 41 33 36 34 27 30 29
-23 27 26 18 22 22 17 20 20 15 18 18 14 17 17 13 16 16
-13 16 16 13 16 16 12 15 15 12 15 15 12 15 15 12 15 15
-13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 17 17 13 17 17 14 17 17 14 17 17 14 17 17 14 18 18
-14 18 18 14 18 18 15 18 18 15 18 18 15 19 19 15 19 19
-15 19 19 15 19 19 17 21 21 33 36 34 32 34 33 31 33 31
-33 36 34 33 36 34 31 33 31 27 29 28 25 27 26 21 22 21
-19 20 19 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 63 64 60 137 133 100 43 45 43 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 68 70 65 110 109 94 110 109 94 105 104 92 84 83 72
-68 70 65 55 57 54 43 45 43 35 37 36 30 32 31 26 28 27
-20 24 24 17 21 21 16 19 19 14 17 17 13 16 16 12 15 15
-12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15
-12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
-13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
-14 17 17 14 17 17 14 18 18 14 18 18 14 18 18 15 18 18
-15 19 19 15 19 19 15 19 19 20 24 24 32 34 33 35 37 36
-37 39 37 35 37 36 33 36 34 30 32 31 26 28 27 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-1 1 1 99 98 80 184 179 149 184 179 149 68 70 65 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 15 15 110 109 94 110 109 94 108 107 93 99 98 80 72 73 67
-61 63 57 49 51 48 39 40 39 33 36 34 27 30 29 23 25 24
-18 22 22 16 19 19 14 17 17 13 16 16 12 15 15 12 15 15
-11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
-11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
-12 15 15 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 17 17 14 17 17 14 17 17 14 17 17 14 18 18 14 18 18
-14 18 18 15 18 18 15 19 19 15 19 19 30 32 31 38 39 37
-39 40 39 39 40 39 35 37 36 31 33 31 27 29 28 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
-110 109 94 197 193 154 210 208 158 184 179 149 68 70 65 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-68 70 65 110 109 94 110 109 94 105 104 92 84 83 72 65 66 61
-51 52 50 43 45 43 35 37 36 30 32 31 25 27 26 20 23 23
-17 20 20 15 18 18 13 16 16 12 15 15 12 15 15 11 14 14
-11 14 14 11 14 14 11 13 13 11 13 13 11 13 13 11 13 13
-11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
-12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 13 16 16
-13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 14 17 17
-14 18 18 14 18 18 14 18 18 16 19 19 37 39 37 41 42 42
-41 42 42 41 42 42 38 39 37 32 34 33 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 137 133 100
-197 193 154 251 251 187 239 239 170 184 179 149 31 33 31 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 12
-110 109 94 110 109 94 105 104 92 90 89 73 72 73 67 58 59 55
-46 47 45 37 39 37 31 33 31 26 28 27 20 24 24 17 21 21
-15 18 18 13 16 16 12 15 15 12 14 14 11 13 13 11 13 13
-10 13 13 10 13 13 10 13 13 10 13 13 10 13 13 10 13 13
-10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
-13 16 16 13 16 16 13 16 16 13 16 16 13 17 17 13 17 17
-14 17 17 14 17 17 14 18 18 23 27 26 41 42 42 41 42 42
-43 45 43 41 42 42 39 40 39 33 36 34 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 27 29 28 168 163 120 210 208 158
-251 251 187 251 251 187 210 208 158 137 133 100 1 1 1 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 60 60 56
-110 109 94 105 104 92 105 104 92 84 83 72 65 66 61 51 52 50
-40 43 41 33 36 34 27 30 29 23 25 24 18 22 22 16 19 19
-14 17 17 12 15 15 11 14 14 11 14 14 10 13 13 10 13 13
-10 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
-11 13 13 11 14 14 11 14 14 11 14 14 11 14 14 12 15 15
-12 15 15 12 15 15 12 15 15 13 16 16 13 16 16 13 16 16
-13 17 17 13 17 17 14 17 17 32 34 33 43 45 43 43 45 43
-43 45 43 43 45 43 39 40 39 33 36 34 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 68 70 65 184 179 149 210 208 158 251 251 187
-251 251 187 214 212 158 184 179 149 37 39 37 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 105 104 92
-105 104 92 105 104 92 99 98 80 72 73 67 58 59 55 46 47 45
-35 37 36 30 32 31 25 27 26 20 23 23 16 19 19 14 17 17
-12 15 15 12 14 14 11 13 13 10 13 13 10 12 12 10 12 12
-10 12 12 10 12 12 9 12 12 9 12 12 9 12 12 9 12 12
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 13 13
-10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
-13 16 16 13 16 16 17 20 20 41 42 42 46 47 45 46 47 45
-46 47 45 43 45 43 40 41 39 33 36 34 27 29 28 23 24 24
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 15 15 110 109 94 197 193 154 214 212 158 251 251 187 251 251 187
-239 239 170 184 179 149 84 83 72 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 47 48 46 105 104 92
-105 104 92 99 98 80 84 83 72 68 70 65 51 52 50 40 43 41
-32 34 33 27 29 28 22 24 23 17 21 21 15 18 18 13 16 16
-12 15 15 11 13 13 10 13 13 10 12 12 9 12 12 9 12 12
-9 12 12 9 12 12 9 11 11 9 11 11 9 11 11 9 11 11
-9 12 12 9 12 12 9 12 12 9 12 12 10 12 12 10 12 12
-10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
-11 14 14 11 14 14 11 14 14 12 14 14 12 15 15 12 15 15
-12 15 15 13 16 16 28 31 30 43 45 43 47 48 46 47 48 46
-47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 3 4 4 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 60 60 56
-177 172 135 197 193 154 251 251 187 251 251 187 251 251 187 251 251 187
-184 179 149 110 109 94 3 4 4 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 1 99 98 80 105 104 92
-99 98 80 87 86 72 84 83 72 63 64 60 46 47 45 35 37 36
-30 32 31 25 27 26 18 22 22 16 19 19 14 17 17 12 15 15
-11 14 14 10 13 13 9 12 12 9 12 12 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 12 12 9 12 12
-9 12 12 10 12 12 10 12 12 10 12 12 10 13 13 10 13 13
-10 13 13 11 13 13 11 14 14 11 14 14 11 14 14 12 15 15
-12 15 15 14 17 17 41 42 42 47 48 46 49 51 48 51 52 50
-47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
-19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 23 24 24 137 133 100 184 179 149
-210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 184 179 149
-110 109 94 13 13 13 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 30 32 31 105 104 92 99 98 80
-84 83 72 84 83 72 72 73 67 55 57 54 41 42 42 32 34 33
-27 29 28 20 24 24 17 20 20 14 17 17 13 16 16 12 14 14
-10 13 13 10 12 12 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 12 12 9 12 12 10 12 12 10 12 12 10 12 12
-10 13 13 10 13 13 10 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 27 29 28 55 56 53 72 73 67 51 52 50 51 52 50
-49 51 48 43 45 43 39 40 39 32 34 33 26 28 27 21 22 21
-19 20 19 16 16 16 18 19 17 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 8 8 7 84 83 72 184 179 149 197 193 154 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 184 179 149 145 141 105
-19 20 19 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 14 14 13 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 72 73 67 105 104 92 84 83 72
-72 73 67 84 83 72 68 70 65 49 51 48 39 40 39 30 32 31
-25 27 26 18 22 22 15 18 18 13 16 16 12 15 15 11 13 13
-10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 12 12 9 12 12 9 12 12
-10 12 12 10 12 12 10 12 12 10 13 13 10 13 13 11 13 13
-13 16 16 41 42 42 99 98 80 158 153 112 65 66 61 51 52 50
-49 51 48 43 45 43 39 40 39 31 33 31 25 27 26 21 22 21
-21 22 21 68 70 65 55 56 53 13 13 13 12 12 12 12 12 12
-12 12 12 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
-63 64 60 158 153 112 184 179 149 210 208 158 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 184 179 149 137 133 100 27 29 28
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-21 22 21 110 109 94 5 6 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 13 13 13 105 104 92 90 89 73 72 73 67
-68 70 65 84 83 72 63 64 60 46 47 45 35 37 36 27 29 28
-22 24 23 17 20 20 14 17 17 12 15 15 11 14 14 10 12 12
-10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 12 12 9 12 12 10 12 12 10 12 12 10 13 13 10 13 13
-30 32 31 47 48 46 177 172 135 210 208 158 137 133 100 55 56 53
-49 51 48 43 45 43 38 39 37 31 33 31 25 27 26 22 24 23
-110 109 94 184 179 149 63 64 60 13 13 13 12 12 12 12 12 12
-12 12 12 8 9 9 0 0 0 1 1 1 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 21 22 21 105 104 92
-184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 184 179 149 145 141 105 23 24 24 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-68 70 65 184 179 149 105 104 92 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 51 52 50 99 98 80 84 83 72 63 64 60
-68 70 65 72 73 67 55 57 54 41 42 42 32 34 33 25 27 26
-20 23 23 16 19 19 13 16 16 12 14 14 10 13 13 10 12 12
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 12 12 9 12 12 10 12 12 17 20 20
-46 47 45 72 73 67 210 208 158 251 251 187 210 208 158 63 64 60
-49 51 48 43 45 43 37 39 37 30 32 31 24 26 24 105 104 92
-210 208 158 197 193 154 47 48 46 13 13 13 12 12 12 12 12 12
-12 12 12 6 7 7 33 36 34 48 49 45 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 8 8 7 23 24 24 55 56 53 110 109 94
-210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 184 179 149 110 109 94 20 20 20 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-110 109 94 251 251 187 210 208 158 47 48 46 0 0 0 0 0 0
-0 0 0 1 1 1 90 89 73 90 89 73 72 73 67 55 56 53
-72 73 67 68 70 65 51 52 50 37 39 37 28 31 30 23 25 24
-17 21 21 15 18 18 12 15 15 11 14 14 10 13 13 9 12 12
-9 11 11 9 11 11 9 11 11 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 12 12 13 16 16 41 42 42
-49 51 48 110 109 94 251 251 187 251 251 187 251 251 187 105 104 92
-49 51 48 43 45 43 35 37 36 30 31 28 47 48 46 197 193 154
-251 251 187 197 193 154 31 33 31 12 12 12 12 12 12 12 12 12
-12 12 12 51 52 50 184 179 149 72 73 67 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2
-11 11 11 21 22 21 30 32 31 40 41 39 60 60 56 145 141 105
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-184 179 149 110 109 94 13 13 13 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 4 5 4 61 61 53 48 49 45 3 4 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-156 151 111 251 251 187 251 251 187 184 179 149 11 11 11 0 0 0
-0 0 0 26 28 27 99 98 80 84 83 72 60 60 56 43 45 43
-72 73 67 65 66 61 49 51 48 35 37 36 27 29 28 20 24 24
-17 20 20 14 17 17 12 15 15 11 13 13 10 12 12 9 11 11
-9 11 11 9 11 11 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 11 13 13 37 39 37 47 48 46
-51 52 50 184 179 149 251 251 187 251 251 187 251 251 187 145 141 105
-47 48 46 41 42 42 35 37 36 27 29 28 137 133 100 251 251 187
-251 251 187 197 193 154 19 20 19 12 12 12 12 12 12 12 12 12
-27 29 28 184 179 149 214 212 158 63 64 60 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 6 7 7 16 16 16 24 26 24
-30 32 31 38 39 37 47 48 46 55 57 54 68 70 65 110 109 94
-197 193 154 251 251 187 251 251 187 251 251 187 210 208 158 184 179 149
-105 104 92 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 65 66 61 184 179 149 156 151 111
-30 32 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-168 163 120 251 251 187 251 251 187 251 251 187 110 109 94 0 0 0
-0 0 0 60 60 56 84 83 72 68 70 65 51 52 50 38 39 37
-84 83 72 63 64 60 43 45 43 33 36 34 25 27 26 20 23 22
-15 18 18 13 16 16 12 14 14 10 13 13 9 12 12 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-9 11 11 9 11 11 10 12 12 33 36 34 46 47 45 51 52 50
-72 73 67 210 208 158 251 251 187 251 251 187 251 251 187 177 172 135
-47 48 46 41 42 42 35 37 36 37 39 37 184 179 149 251 251 187
-251 251 187 197 193 154 13 13 13 12 12 12 12 12 12 12 12 12
-110 109 94 251 251 187 251 251 187 37 39 37 0 0 0 0 0 0
-0 0 0 21 22 20 2 2 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-4 5 5 12 12 12 21 22 21 25 27 26 30 32 31 38 39 37
-46 47 45 55 56 53 60 60 56 65 66 61 68 70 65 105 104 92
-110 109 94 197 193 154 210 208 158 197 193 154 184 179 149 84 83 72
-2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 13 13 184 179 149 251 251 187
-197 193 154 43 44 41 0 0 0 0 0 0 0 0 0 0 0 0
-145 141 105 251 251 187 251 251 187 251 251 187 214 212 158 43 45 43
-2 2 2 84 83 72 72 73 67 58 59 55 41 42 42 38 39 37
-72 73 67 58 59 55 41 42 42 31 33 31 25 27 26 18 22 22
-14 17 17 12 15 15 12 14 14 10 12 12 9 12 12 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 12 12 31 33 31 43 45 43 49 51 48 55 56 53
-110 109 94 251 251 187 251 251 187 251 251 187 251 251 187 168 163 120
-47 48 46 41 42 42 33 36 34 63 64 60 197 193 154 251 251 187
-251 251 187 184 179 149 13 13 13 12 12 12 12 12 12 16 16 16
-197 193 154 251 251 187 239 239 170 20 20 20 0 0 0 2 2 1
-108 107 93 110 109 94 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 4 5 5 11 11 11 18 19 18
-22 24 23 26 28 27 32 34 33 39 40 39 46 47 45 51 52 50
-55 57 54 60 60 56 63 64 60 63 64 60 63 64 60 58 59 55
-63 64 60 99 98 80 145 141 105 137 133 100 43 45 43 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 3 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 110 109 94 251 251 187
-251 251 187 184 179 149 25 27 26 0 0 0 0 0 0 0 0 0
-99 98 80 251 251 187 251 251 187 251 251 187 251 251 187 156 151 111
-25 27 26 84 83 72 65 66 61 47 48 46 32 34 33 39 40 39
-72 73 67 55 57 54 40 41 39 30 32 31 23 25 24 18 22 22
-14 17 17 12 15 15 11 13 13 10 12 12 9 11 11 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-9 11 11 28 31 30 41 42 42 47 48 46 55 56 53 58 59 55
-137 133 100 251 251 187 251 251 187 251 251 187 210 208 158 137 133 100
-47 48 46 40 41 39 32 34 33 75 75 61 184 179 149 239 239 170
-251 251 187 177 172 135 13 13 13 12 12 12 12 12 12 43 44 41
-197 193 154 251 251 187 210 208 158 10 10 9 0 0 0 84 83 72
-251 251 187 84 83 72 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-6 7 7 11 11 11 17 17 17 20 20 20 23 24 24 27 29 28
-32 34 33 38 39 37 43 45 43 47 48 46 51 52 50 55 56 53
-58 59 55 58 59 55 55 57 54 55 56 53 47 48 46 41 42 42
-35 37 36 31 33 31 47 48 46 14 14 13 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 66 65 55 99 98 80 20 20 20
-0 0 0 0 0 0 0 0 0 0 0 0 43 45 43 214 212 158
-251 251 187 251 251 187 145 141 105 3 3 3 0 0 0 0 0 0
-48 49 45 184 179 149 239 239 170 251 251 187 239 239 170 177 172 135
-84 83 72 72 73 67 55 56 53 39 40 39 26 28 27 39 40 39
-68 70 65 51 52 50 39 40 39 28 31 30 22 24 23 17 20 20
-14 17 17 12 14 14 10 13 13 9 11 11 9 11 11 9 11 11
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-27 29 28 40 41 39 46 47 45 51 52 50 55 57 54 63 64 60
-131 127 93 197 193 154 210 208 158 197 193 154 168 163 120 96 95 69
-47 48 46 40 41 39 32 34 33 71 71 57 145 141 105 184 179 149
-184 179 149 131 127 93 13 13 13 12 12 12 12 12 12 48 49 45
-168 163 120 184 179 149 156 151 111 6 7 7 14 14 13 177 172 135
-239 239 170 40 41 39 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 3 3 3 6 7 7 11 11 11 16 16 16
-18 19 18 21 22 21 23 24 24 27 29 28 32 34 33 37 39 37
-41 42 42 43 45 43 47 48 46 51 52 50 51 52 50 51 52 50
-51 52 50 49 51 48 46 47 45 40 41 39 32 34 33 25 27 26
-20 20 20 14 14 13 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 33 36 34 197 193 154 184 179 149
-41 42 42 0 0 0 0 0 0 0 0 0 3 3 3 184 179 149
-251 251 187 251 251 187 184 179 149 48 49 45 0 0 0 0 0 0
-16 17 12 121 119 87 177 172 135 194 189 146 188 184 146 145 141 105
-82 81 62 63 64 60 46 47 45 31 33 31 21 22 21 35 37 36
-68 70 65 51 52 50 37 39 37 27 30 29 22 24 23 17 20 20
-13 16 16 12 14 14 10 13 13 9 11 11 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 25 27 26
-38 39 37 43 45 43 51 52 50 55 56 53 60 60 56 63 64 60
-92 91 72 158 153 112 176 171 126 171 165 117 149 143 98 82 81 62
-44 46 43 38 39 37 30 32 31 71 71 57 131 127 93 160 154 106
-149 143 98 82 81 62 13 13 13 12 12 12 12 12 12 46 47 43
-121 119 87 134 131 96 96 95 69 7 7 6 38 39 37 131 127 93
-145 141 105 12 13 12 0 0 0 1 1 1 3 3 3 6 7 7
-10 10 9 12 12 12 14 14 13 16 16 16 18 19 18 21 22 21
-22 24 23 26 28 27 30 31 28 33 36 34 37 39 37 40 41 39
-41 42 42 43 45 43 46 47 45 46 47 45 46 47 45 43 45 43
-41 42 42 37 39 37 31 33 31 26 28 27 21 22 21 16 16 16
-6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 177 172 135 251 251 187
-197 193 154 27 29 28 0 0 0 0 0 0 0 0 0 110 109 94
-239 239 170 239 239 170 184 179 149 87 86 72 2 2 1 0 0 0
-1 1 1 82 81 62 142 137 94 165 161 109 165 161 109 131 127 93
-75 75 61 55 56 53 37 39 37 25 27 26 19 20 19 32 34 33
-65 66 61 49 51 48 35 37 36 27 29 28 20 23 23 16 19 19
-13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 22 24 23 35 37 36
-41 42 42 47 48 46 55 56 53 58 59 55 63 64 60 65 66 61
-71 71 57 131 127 93 160 154 106 160 154 106 142 137 94 82 81 62
-46 47 43 40 41 39 33 36 34 66 65 55 125 122 87 149 143 98
-142 137 94 82 81 62 17 17 17 18 19 17 14 14 13 46 47 43
-118 116 76 125 122 87 96 95 69 16 17 12 71 71 57 103 101 77
-82 81 62 11 11 11 11 11 11 13 13 13 14 14 13 14 14 13
-15 15 15 16 16 16 17 17 17 19 20 19 21 22 21 23 24 24
-26 28 27 27 29 28 31 33 31 33 36 34 35 37 36 38 39 37
-39 40 39 39 40 39 38 39 37 37 39 37 35 37 36 31 33 31
-27 29 28 24 26 24 21 22 21 17 17 17 12 12 12 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 68 70 65 251 251 187
-251 251 187 156 151 111 2 2 1 0 0 0 0 0 0 43 44 41
-177 172 135 184 179 149 158 153 112 103 101 77 19 20 18 0 0 0
-0 0 0 46 47 43 131 127 93 160 154 106 160 154 106 131 127 93
-71 71 57 43 45 43 30 32 31 21 22 21 16 16 16 26 28 27
-63 64 60 47 48 46 35 37 36 26 28 27 20 23 23 16 19 19
-13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-7 9 9 7 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 20 20 20 33 36 34 40 41 39
-46 47 45 51 52 50 55 57 54 60 60 56 63 64 60 65 66 61
-66 65 55 118 116 76 151 147 98 165 161 109 151 147 98 121 119 87
-96 95 69 96 95 69 96 95 69 103 101 77 142 137 94 151 147 98
-142 137 94 103 101 77 82 81 62 82 81 62 82 81 62 96 95 69
-131 127 93 142 137 94 103 101 77 46 47 43 96 95 69 118 116 76
-71 71 57 14 14 13 14 14 13 15 15 15 15 15 15 16 16 16
-16 16 16 17 17 17 18 19 18 20 20 20 21 22 21 23 24 24
-25 27 26 27 29 28 30 31 28 30 32 31 31 33 31 31 33 31
-31 33 31 31 33 31 30 31 28 27 29 28 25 27 26 22 24 23
-20 20 20 16 16 16 13 13 13 6 7 7 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-58 59 55 68 70 65 8 8 7 0 0 0 10 10 9 210 208 158
-251 251 187 184 179 149 38 39 37 0 0 0 0 0 0 8 8 7
-103 101 77 149 143 98 149 143 98 118 116 76 40 41 39 25 27 25
-53 55 47 82 81 62 144 139 99 165 161 109 165 161 109 142 137 94
-71 71 57 35 37 36 24 26 24 18 19 18 15 15 15 22 24 23
-63 64 60 46 47 45 33 36 34 26 28 27 20 23 22 17 18 17
-12 15 15 11 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 16 16 16 30 31 28 35 37 36 41 42 42
-47 48 46 55 56 53 58 59 55 63 64 60 65 66 61 65 66 61
-61 61 53 103 101 77 151 147 98 171 165 117 171 165 117 168 163 120
-158 153 112 158 153 112 155 149 109 151 147 98 151 147 98 160 154 106
-151 147 98 149 143 98 142 137 94 149 143 98 149 143 98 149 143 98
-155 149 109 151 147 98 131 127 93 103 101 77 125 122 87 118 116 76
-71 71 57 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17
-17 17 17 17 17 17 18 19 18 19 20 19 20 20 20 21 22 21
-23 24 24 24 26 24 25 27 26 26 28 27 26 28 27 26 28 27
-25 27 26 24 26 24 22 24 23 21 22 21 19 20 19 16 16 16
-14 14 13 8 8 7 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-20 20 20 184 179 149 168 163 120 21 22 21 0 0 0 105 104 92
-177 172 135 145 141 105 71 71 57 0 0 0 0 0 0 0 0 0
-66 65 55 131 127 93 151 147 98 142 137 94 118 116 76 121 119 87
-145 141 105 158 153 112 176 171 126 178 174 128 176 171 126 149 145 103
-96 95 69 31 33 31 21 22 21 16 16 16 14 14 13 18 19 18
-60 60 56 46 47 45 33 36 34 25 27 26 21 22 21 15 18 18
-12 15 15 11 13 13 9 11 11 8 10 10 8 10 10 8 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 9 9
-8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 10 12 12 26 28 27 31 33 31 38 39 37 43 45 43
-51 52 50 55 56 53 60 60 56 63 64 60 65 66 61 68 70 65
-63 64 60 96 95 69 158 153 112 178 174 128 188 184 146 194 189 146
-194 189 146 188 184 146 184 181 136 176 171 126 171 165 117 173 167 111
-173 167 111 165 161 109 171 165 117 174 170 121 176 171 126 178 174 128
-178 174 128 174 170 121 160 154 106 149 143 98 149 143 98 125 122 87
-71 71 57 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17
-17 17 17 17 17 17 17 17 17 18 19 18 19 20 19 20 20 20
-21 22 21 21 22 21 21 22 21 22 24 23 21 22 21 21 22 21
-21 22 21 19 20 19 18 19 18 16 16 16 14 14 13 11 11 11
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 105 104 92 197 193 154 110 109 94 9 9 8 36 38 35
-121 119 87 131 127 93 96 95 69 18 19 17 30 31 28 66 65 55
-96 95 69 142 137 94 160 154 106 160 154 106 160 154 106 168 163 120
-184 181 136 194 191 148 197 193 154 197 193 154 194 189 146 168 163 120
-125 122 87 46 47 43 18 19 18 15 15 15 13 13 13 14 14 13
-55 57 54 43 45 43 32 34 33 25 27 26 18 22 22 17 17 17
-12 14 14 10 12 12 9 11 11 8 10 10 8 9 9 7 9 9
-6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 32 34 33 41 42 42 35 37 36 39 40 39 37 39 37
-35 37 36 55 57 54 60 60 56 63 64 60 65 66 61 65 66 61
-61 63 57 115 113 82 168 163 120 194 191 148 204 201 155 210 208 158
-210 208 158 210 208 158 197 193 154 194 189 146 186 182 128 176 171 126
-174 170 121 176 171 126 186 182 128 190 186 136 194 191 148 197 193 154
-197 193 154 188 184 146 181 176 137 174 170 121 165 161 109 142 137 94
-82 81 62 24 26 24 16 16 16 16 16 16 16 16 16 16 16 16
-17 17 17 17 17 17 17 17 17 17 17 17 18 19 18 19 20 19
-19 20 19 19 20 19 20 20 20 19 20 19 19 20 19 18 19 18
-17 17 17 15 15 15 13 13 13 12 12 12 6 7 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 17 18 17 137 133 100 115 113 82 53 55 47 19 20 18
-103 101 77 144 139 99 137 133 100 115 113 82 137 133 100 156 151 111
-158 153 112 164 159 111 171 165 117 174 170 121 178 174 128 194 189 146
-204 201 155 214 212 158 214 212 158 214 212 158 210 208 158 188 184 146
-158 153 112 87 86 72 17 17 17 13 13 13 13 13 13 15 15 15
-55 56 53 43 45 43 32 34 33 24 26 24 17 20 20 16 16 16
-12 14 14 10 12 12 8 10 10 8 10 10 7 9 9 6 8 8
-6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 110 109 94 84 83 72 49 51 48 26 28 27 8 10 10
-8 9 9 51 52 50 58 59 55 63 64 60 63 64 60 63 64 60
-66 65 55 134 131 96 181 176 137 210 208 158 214 212 158 239 239 170
-239 239 170 224 223 159 210 208 158 204 201 155 194 189 146 186 182 128
-186 182 128 184 181 136 194 189 146 204 201 155 210 208 158 210 208 158
-210 208 158 210 208 158 197 193 154 190 186 136 176 171 126 155 149 109
-118 116 76 36 38 35 15 15 15 16 16 16 16 16 16 16 16 16
-16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 17 17 17
-17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 15 15 15
-13 13 13 12 12 12 8 8 7 2 2 2 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 53 55 47 103 101 77 96 95 69 53 55 47
-103 101 77 158 153 112 177 172 135 184 179 149 188 184 146 197 193 154
-194 189 146 190 186 136 184 181 136 184 181 136 194 189 146 210 208 158
-214 212 158 239 239 170 251 251 187 251 251 187 224 223 159 204 201 155
-177 172 135 121 119 87 30 31 28 13 13 13 12 12 12 39 40 39
-60 60 56 43 45 43 32 34 33 23 25 24 18 19 18 13 16 16
-13 13 13 9 11 11 8 10 10 8 9 9 6 8 8 6 8 8
-6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-14 17 17 197 193 154 158 153 112 55 57 54 7 9 9 7 9 9
-8 10 10 51 52 50 58 59 55 60 60 56 63 64 60 63 64 60
-71 71 57 155 149 109 194 191 148 214 212 158 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 190 186 136
-190 186 136 194 189 146 204 201 155 210 208 158 224 223 159 239 239 170
-239 239 170 224 223 159 210 208 158 204 201 155 190 186 136 164 159 111
-125 122 87 40 41 39 15 15 15 15 15 15 15 15 15 15 15 15
-16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
-16 16 16 16 16 16 15 15 15 14 14 13 13 13 13 12 12 12
-8 9 9 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 21 22 20 96 95 69 125 122 87 121 119 87
-144 139 99 177 172 135 197 193 154 210 208 158 214 212 158 214 212 158
-210 208 158 204 201 155 194 191 148 194 189 146 204 201 155 214 212 158
-239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-188 184 146 145 141 105 53 55 47 12 12 12 15 15 15 63 64 60
-63 64 60 41 42 42 31 33 31 23 24 24 17 18 17 12 15 15
-11 13 13 9 11 11 8 9 9 7 9 9 6 8 8 6 8 8
-6 7 7 6 7 7 6 8 8 6 8 8 6 8 8 6 8 8
-6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 8 7
-43 45 43 251 251 187 156 151 111 8 10 10 7 9 9 7 9 9
-21 22 21 51 52 50 55 56 53 55 57 54 58 59 55 58 59 55
-75 75 61 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 214 212 158 204 201 155 194 189 146
-190 186 136 197 193 154 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 176 171 126
-125 122 87 36 38 35 14 14 13 14 14 13 15 15 15 15 15 15
-15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
-15 15 15 14 14 13 13 13 13 12 12 12 10 10 9 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 7 7 5 71 71 57 131 127 93 158 153 112
-177 172 135 197 193 154 214 212 158 239 239 170 251 251 187 251 251 187
-238 237 168 210 208 158 204 201 155 197 193 154 204 201 155 214 212 158
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-197 193 154 156 151 111 66 65 55 12 12 12 37 39 37 58 59 55
-58 59 55 41 42 42 31 33 31 22 24 23 17 17 17 12 14 14
-10 12 12 8 10 10 6 8 8 6 8 8 6 7 7 6 7 7
-6 7 7 5 7 7 6 7 7 6 7 7 6 8 8 6 8 8
-6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
-7 9 9 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
-61 63 57 197 193 154 16 19 19 6 8 8 6 8 8 8 9 9
-41 42 42 47 48 46 51 52 50 51 52 50 55 56 53 55 56 53
-71 71 57 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 214 212 158 204 201 155 194 189 146
-190 186 136 197 193 154 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 224 223 159 204 201 155 177 172 135
-121 119 87 30 31 28 13 13 13 14 14 13 14 14 13 14 14 13
-14 14 13 14 14 13 15 15 15 15 15 15 14 14 13 13 13 13
-12 12 12 12 12 12 10 10 9 4 5 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 48 49 45 131 127 93 174 170 121
-194 189 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 204 201 155 197 193 154 204 201 155 210 208 158
-239 239 170 251 251 187 251 251 187 251 251 187 239 239 170 214 212 158
-194 191 148 156 151 111 71 71 57 19 20 19 51 52 50 51 52 50
-51 52 50 41 42 42 30 32 31 21 22 21 17 17 17 13 13 13
-9 11 11 8 9 9 6 8 8 6 7 7 6 7 7 5 7 7
-5 6 5 5 6 5 5 7 7 5 7 7 6 7 7 6 7 7
-6 8 8 6 8 8 6 8 8 6 7 7 6 7 7 6 7 7
-6 7 7 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
-55 56 53 43 45 43 6 8 8 6 8 8 6 8 8 47 48 46
-60 60 56 47 48 46 46 47 45 47 48 46 38 39 37 10 12 12
-66 65 55 145 141 105 197 193 154 214 212 158 251 251 187 251 251 187
-251 251 187 251 251 187 224 223 159 210 208 158 194 191 148 184 181 136
-184 181 136 194 189 146 204 201 155 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 181 176 137
-115 113 82 21 22 20 13 13 13 13 13 13 13 13 13 13 13 13
-14 14 13 13 13 13 13 13 13 13 13 13 12 12 12 11 11 11
-10 10 9 6 7 7 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 2 2 1 66 65 55 144 139 99 178 174 128
-204 201 155 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 204 201 155 194 191 148 197 193 154 204 201 155
-214 212 158 239 239 170 239 239 170 239 239 170 214 212 158 210 208 158
-184 181 136 149 145 103 66 65 55 41 42 42 47 48 46 46 47 45
-43 45 43 39 40 39 28 31 30 21 22 21 16 16 16 10 12 12
-8 10 10 6 8 8 6 7 7 6 7 7 5 6 5 5 6 5
-5 6 5 5 6 5 5 6 5 5 6 5 5 7 7 5 7 7
-6 7 7 6 7 7 6 7 7 5 7 7 5 7 7 5 7 7
-5 7 7 6 7 7 6 7 7 6 7 7 6 7 7 6 8 8
-6 8 8 6 8 8 6 7 7 6 7 7 46 47 45 156 151 111
-105 104 92 58 59 55 43 45 43 32 34 33 6 8 8 6 8 8
-49 51 48 125 122 87 181 176 137 204 201 155 214 212 158 239 239 170
-239 239 170 214 212 158 210 208 158 197 193 154 181 176 137 176 171 126
-176 171 126 184 181 136 197 193 154 210 208 158 239 239 170 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
-99 98 80 13 13 13 12 12 12 12 12 12 13 13 13 12 12 12
-12 12 12 12 12 12 11 11 11 11 11 11 8 9 9 4 5 5
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 1 1 0 61 61 53 142 137 94 181 176 137
-204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 197 193 154 190 186 136 184 181 136 188 184 146
-197 193 154 204 201 155 210 208 158 210 208 158 204 201 155 194 189 146
-176 171 126 134 131 96 66 65 55 43 45 43 41 42 42 39 40 39
-35 37 36 33 36 34 27 29 28 20 20 20 15 15 15 9 11 11
-8 9 9 6 7 7 5 6 5 5 6 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 5 6 5 4 5 5
-4 5 5 5 6 5 4 5 5 5 6 5 5 6 5 5 6 5
-5 7 7 5 7 7 5 7 7 5 7 7 5 7 7 5 7 7
-6 7 7 6 7 7 6 7 7 28 31 30 184 179 149 184 179 149
-145 141 105 84 83 72 27 29 28 5 7 7 5 6 5 16 16 16
-43 44 41 96 95 69 158 153 112 188 184 146 204 201 155 210 208 158
-204 201 155 197 193 154 184 179 149 177 172 135 168 163 120 164 159 111
-164 159 111 174 170 121 184 181 136 197 193 154 214 212 158 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
-71 71 57 11 11 11 12 12 12 11 11 11 11 11 11 11 11 11
-10 10 9 10 10 9 8 8 7 3 4 4 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 31 33 31 121 119 87 176 171 126
-197 193 154 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
-239 239 170 210 208 158 194 189 146 178 174 128 174 170 121 176 171 126
-177 172 135 181 176 137 184 179 149 184 179 149 181 176 137 178 174 128
-158 153 112 121 119 87 53 55 47 37 39 37 33 36 34 30 32 31
-27 29 28 25 27 26 24 26 24 19 20 19 13 13 13 8 10 10
-6 8 8 6 7 7 5 6 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 3 4 4 3 4 4 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-5 6 5 5 6 5 5 6 5 5 6 5 5 6 5 5 6 5
-5 6 5 5 6 5 12 14 14 145 141 105 184 179 149 177 172 135
-90 89 73 21 22 21 5 6 5 5 6 5 4 5 5 37 39 37
-38 39 37 61 61 53 134 131 96 168 163 120 184 181 136 188 184 146
-184 179 149 177 172 135 168 163 120 164 159 111 155 149 109 151 147 98
-151 147 98 164 159 111 176 171 126 184 179 149 210 208 158 239 239 170
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 158 153 112
-46 47 43 10 10 9 10 10 9 10 10 9 8 9 9 8 9 9
-6 7 7 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 13 12 7 82 81 62 158 153 112
-188 184 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
-224 223 159 204 201 155 184 181 136 171 165 117 164 159 111 160 154 106
-158 153 112 164 159 111 168 163 120 168 163 120 168 163 120 164 159 111
-142 137 94 96 95 69 43 44 41 27 29 28 26 28 27 23 24 24
-21 22 21 18 19 18 17 17 17 18 19 18 13 13 13 8 8 7
-6 7 7 5 6 5 4 5 5 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 3 3 3 3 3 3 4 4 3 4 4
-3 4 4 3 4 4 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 31 33 31 65 66 61
-37 39 37 38 39 37 96 95 69 144 139 99 168 163 120 174 170 121
-168 163 120 164 159 111 155 149 109 149 145 103 149 143 98 142 137 94
-149 143 98 151 147 98 164 159 111 177 172 135 197 193 154 210 208 158
-251 251 187 251 251 187 251 251 187 239 239 170 197 193 154 137 133 100
-24 26 24 8 9 9 8 9 9 8 8 7 6 7 7 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 46 47 43 125 122 87
-176 171 126 197 193 154 210 208 158 239 239 170 251 251 187 239 239 170
-214 212 158 197 193 154 181 176 137 164 159 111 151 147 98 149 143 98
-149 143 98 149 143 98 149 145 103 155 149 109 160 154 106 149 143 98
-118 116 76 82 81 62 30 31 28 21 22 21 19 20 19 17 17 17
-14 14 13 12 12 12 10 10 9 12 12 12 10 12 12 6 8 8
-4 5 5 3 4 4 3 4 4 3 4 4 3 3 3 3 3 3
-3 3 3 3 3 3 3 3 3 3 3 3 2 3 3 2 3 3
-3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 4 5 5
-4 5 5 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 3 4 4 3 4 4 23 24 24 110 109 94 72 73 67
-39 40 39 22 24 23 46 47 43 103 101 77 142 137 94 155 149 109
-160 154 106 155 149 109 149 143 98 142 137 94 142 137 94 142 137 94
-142 137 94 149 143 98 155 149 109 176 171 126 184 179 149 210 208 158
-239 239 170 251 251 187 251 251 187 214 212 158 184 179 149 105 104 92
-10 10 9 6 7 7 3 4 4 1 1 1 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 12 12 9 82 81 62
-149 145 103 181 176 137 197 193 154 210 208 158 214 212 158 214 212 158
-210 208 158 197 193 154 177 172 135 158 153 112 149 143 98 142 137 94
-142 137 94 142 137 94 149 143 98 151 147 98 151 147 98 131 127 93
-103 101 77 71 71 57 22 24 23 15 15 15 13 13 13 11 11 11
-8 9 9 6 7 7 6 7 7 4 5 5 8 9 9 6 7 7
-4 5 5 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3
-2 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 21 22 21 145 141 105 145 141 105 72 73 67
-17 18 17 3 4 4 21 22 20 66 65 55 118 116 76 142 137 94
-149 143 98 151 147 98 149 143 98 142 137 94 142 137 94 142 137 94
-142 137 94 149 143 98 155 149 109 168 163 120 184 179 149 210 208 158
-239 239 170 251 251 187 251 251 187 210 208 158 177 172 135 71 71 57
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
-115 113 82 158 153 112 181 176 137 197 193 154 204 201 155 210 208 158
-204 201 155 188 184 146 177 172 135 164 159 111 149 145 103 142 137 94
-142 137 94 142 137 94 149 143 98 151 147 98 149 143 98 125 122 87
-96 95 69 61 61 53 16 17 12 8 9 9 8 8 7 6 7 7
-4 5 5 3 4 4 3 3 3 3 3 3 3 3 3 5 6 5
-3 4 4 2 3 3 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2
-2 2 2 2 2 2 2 3 3 2 3 3 2 3 3 2 3 3
-3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
-3 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 4 4 8 9 9 8 8 7 3 3 3
-3 3 3 3 3 3 9 9 8 36 38 35 82 81 62 118 116 76
-142 137 94 151 147 98 151 147 98 151 147 98 149 143 98 149 143 98
-149 143 98 151 147 98 160 154 106 176 171 126 188 184 146 210 208 158
-239 239 170 251 251 187 239 239 170 210 208 158 156 151 111 31 33 31
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
-66 65 55 125 122 87 158 153 112 181 176 137 194 189 146 197 193 154
-197 193 154 184 179 149 177 172 135 168 163 120 156 151 111 151 147 98
-151 147 98 151 147 98 151 147 98 161 156 96 149 143 98 118 116 76
-82 81 62 53 55 47 12 12 9 4 5 5 3 4 4 3 3 3
-3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 2 2
-3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2 3 3
-2 3 3 2 3 3 2 3 3 2 3 3 2 2 2 2 2 2
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 3 3 3
-3 3 3 3 3 3 72 73 67 61 61 53 53 55 47 96 95 69
-131 127 93 151 147 98 161 156 96 161 156 96 151 147 98 151 147 98
-161 156 96 160 154 106 164 159 111 177 172 135 197 193 154 210 208 158
-239 239 170 251 251 187 224 223 159 197 193 154 131 127 93 9 9 8
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-24 26 24 82 81 62 131 127 93 164 159 111 178 174 128 188 184 146
-188 184 146 188 184 146 181 176 137 176 171 126 168 163 120 164 159 111
-160 154 106 160 154 106 160 154 106 160 154 106 151 147 98 125 122 87
-82 81 62 61 61 53 12 12 9 3 3 3 3 3 3 2 2 2
-2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
-0 0 0 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 1 2 2
-1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
-2 3 3 30 32 31 72 73 67 31 33 31 36 38 35 82 81 62
-118 116 76 149 143 98 161 156 96 161 156 96 161 156 96 160 154 106
-165 161 109 165 161 109 176 171 126 188 184 146 204 201 155 214 212 158
-239 239 170 239 239 170 214 212 158 184 179 149 82 81 62 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-2 2 2 43 44 41 96 95 69 131 127 93 160 154 106 176 171 126
-184 181 136 184 181 136 184 181 136 181 176 137 178 174 128 174 170 121
-171 165 117 173 167 111 173 167 111 173 167 111 160 154 106 131 127 93
-96 95 69 66 65 55 16 17 12 2 2 2 1 1 1 1 1 1
-1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 10 9 6 30 31 28 71 71 57
-118 116 76 149 143 98 165 161 109 165 161 109 165 161 109 173 167 111
-173 167 111 176 171 126 184 181 136 197 193 154 210 208 158 224 223 159
-251 251 187 239 239 170 210 208 158 168 163 120 40 41 39 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 13 12 7 61 61 53 96 95 69 131 127 93 160 154 106
-176 171 126 184 181 136 184 181 136 188 184 146 184 181 136 184 181 136
-184 181 136 186 182 128 186 182 128 178 174 128 174 170 121 149 145 103
-118 116 76 82 81 62 21 22 20 1 1 1 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 3 3 3 30 31 28 66 65 55
-118 116 76 149 143 98 165 161 109 173 167 111 173 167 111 174 170 121
-186 182 128 190 186 136 197 193 154 210 208 158 224 223 159 251 251 187
-251 251 187 239 239 170 197 193 154 137 133 100 12 12 9 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 30 31 28 71 71 57 103 101 77 134 131 96
-164 159 111 176 171 126 184 181 136 188 184 146 194 189 146 197 193 154
-197 193 154 197 193 154 194 191 148 194 189 146 190 186 136 176 171 126
-145 141 105 103 101 77 40 41 39 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 30 31 28 71 71 57
-118 116 76 160 154 106 173 167 111 178 174 128 186 182 128 190 186 136
-194 191 148 204 201 155 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 214 212 158 184 179 149 84 83 72 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 5 5 3 43 44 41 82 81 62 103 101 77
-142 137 94 165 161 109 178 174 128 190 186 136 197 193 154 204 201 155
-210 208 158 210 208 158 210 208 158 210 208 158 210 208 158 197 193 154
-177 172 135 145 141 105 79 78 62 5 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 2 2 1 2 2 30 31 28 82 81 62
-142 137 94 165 161 109 178 174 128 190 186 136 194 191 148 204 201 155
-210 208 158 214 212 158 239 239 170 251 251 187 251 251 187 251 251 187
-251 251 187 210 208 158 168 163 120 36 38 35 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 53 55 47 82 81 62
-118 116 76 151 147 98 171 165 117 184 181 136 194 191 148 210 208 158
-214 212 158 224 223 159 239 239 170 239 239 170 224 223 159 214 212 158
-197 193 154 176 171 126 115 113 82 24 26 24 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 40 41 39 103 101 77
-151 147 98 176 171 126 190 186 136 197 193 154 210 208 158 214 212 158
-239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-239 239 170 197 193 154 110 109 94 3 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 30 31 28 66 65 55
-96 95 69 125 122 87 160 154 106 178 174 128 194 189 146 204 201 155
-214 212 158 239 239 170 251 251 187 251 251 187 251 251 187 239 239 170
-210 208 158 188 184 146 149 145 103 61 61 53 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 61 61 53 131 127 93
-164 159 111 184 181 136 197 193 154 210 208 158 224 223 159 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-210 208 158 168 163 120 43 44 41 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 4 3 2 36 38 35
-71 71 57 96 95 69 142 137 94 165 161 109 184 181 136 197 193 154
-210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 251 251 187
-214 212 158 197 193 154 168 163 120 103 101 77 7 7 5 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 0 0 0 0 0 0 0 0 0 82 81 62 142 137 94
-174 170 121 194 189 146 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 224 223 159
-184 179 149 99 98 80 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
-43 44 41 82 81 62 118 116 76 142 137 94 171 165 117 190 186 136
-204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
-214 212 158 197 193 154 174 170 121 125 122 87 30 31 28 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 3 4 3 82 81 62 149 143 98
-176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 239 239 170 204 201 155
-145 141 105 30 31 28 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-10 9 6 46 47 43 82 81 62 118 116 76 149 143 98 174 170 121
-194 189 146 210 208 158 224 223 159 251 251 187 251 251 187 224 223 159
-210 208 158 194 191 148 174 170 121 134 131 96 53 55 47 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
-176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 177 172 135
-75 75 61 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 10 9 6 46 47 43 82 81 62 118 116 76 149 143 98
-176 171 126 194 191 148 210 208 158 214 212 158 214 212 158 210 208 158
-197 193 154 184 181 136 164 159 111 131 127 93 53 55 47 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
-174 170 121 194 189 146 204 201 155 214 212 158 239 239 170 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 184 179 149 110 109 94
-12 12 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 10 9 6 43 44 41 82 81 62 115 113 82
-144 139 99 168 163 120 188 184 146 197 193 154 197 193 154 194 189 146
-184 181 136 174 170 121 151 147 98 118 116 76 36 38 35 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 4 3 2 82 81 62 142 137 94
-171 165 117 186 182 128 194 191 148 210 208 158 214 212 158 224 223 159
-239 239 170 224 223 159 210 208 158 184 179 149 137 133 100 36 38 35
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 36 38 35 71 71 57
-103 101 77 131 127 93 155 149 109 168 163 120 168 163 120 168 163 120
-164 159 111 149 143 98 125 122 87 82 81 62 13 12 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 61 61 53 125 122 87
-160 154 106 174 170 121 184 181 136 194 189 146 204 201 155 210 208 158
-210 208 158 204 201 155 184 179 149 145 141 105 61 61 53 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 3 3 2 30 31 28
-61 61 53 82 81 62 103 101 77 121 119 87 125 122 87 125 122 87
-118 116 76 103 101 77 79 78 62 24 26 24 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 25 27 25 96 95 69
-142 137 94 160 154 106 171 165 117 178 174 128 184 181 136 184 181 136
-181 176 137 177 172 135 145 141 105 75 75 61 5 5 3 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 17 12 40 41 39 61 61 53 71 71 57 71 71 57 71 71 57
-66 65 55 43 44 41 12 12 9 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 46 47 43
-96 95 69 125 122 87 142 137 94 149 145 103 155 149 109 155 149 109
-145 141 105 121 119 87 66 65 55 7 7 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 16 17 12 24 26 24 25 27 25 19 20 18
-7 7 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 1
-25 27 25 61 61 53 82 81 62 96 95 69 96 95 69 82 81 62
-61 61 53 25 27 25 2 2 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 5 6 5 13 12 7 10 9 6 3 4 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 6 6 6 10 10 10 10 10 10
+ 10 10 10 6 6 6 6 6 6 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 10 10 10 14 14 14
+ 22 22 22 26 26 26 30 30 30 34 34 34
+ 30 30 30 30 30 30 26 26 26 18 18 18
+ 14 14 14 10 10 10 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 26 26 26 42 42 42
+ 54 54 54 66 66 66 78 78 78 78 78 78
+ 78 78 78 74 74 74 66 66 66 54 54 54
+ 42 42 42 26 26 26 18 18 18 10 10 10
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 22 22 22 42 42 42 66 66 66 86 86 86
+ 66 66 66 38 38 38 38 38 38 22 22 22
+ 26 26 26 34 34 34 54 54 54 66 66 66
+ 86 86 86 70 70 70 46 46 46 26 26 26
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 26 26 26
+ 50 50 50 82 82 82 58 58 58 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 54 54 54 86 86 86 66 66 66
+ 38 38 38 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 22 22 22 50 50 50
+ 78 78 78 34 34 34 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 6 6 6 70 70 70
+ 78 78 78 46 46 46 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 42 42 42 82 82 82
+ 26 26 26 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 14 14 14
+ 46 46 46 34 34 34 6 6 6 2 2 6
+ 42 42 42 78 78 78 42 42 42 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 30 30 30 66 66 66 58 58 58
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 26 26 26
+ 86 86 86 101 101 101 46 46 46 10 10 10
+ 2 2 6 58 58 58 70 70 70 34 34 34
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 42 42 42 86 86 86 10 10 10
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 30 30 30
+ 94 94 94 94 94 94 58 58 58 26 26 26
+ 2 2 6 6 6 6 78 78 78 54 54 54
+ 22 22 22 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 62 62 62 62 62 62 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 26 26 26
+ 54 54 54 38 38 38 18 18 18 10 10 10
+ 2 2 6 2 2 6 34 34 34 82 82 82
+ 38 38 38 14 14 14 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 30 30 30 78 78 78 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 10 10 10 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 78 78 78
+ 50 50 50 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 14 14 14 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 54 54 54
+ 66 66 66 26 26 26 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 82 82 82 2 2 6 2 2 6
+ 2 2 6 6 6 6 10 10 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 14 14 14 10 10 10 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 18 18 18
+ 82 82 82 34 34 34 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 2 2 6
+ 6 6 6 6 6 6 22 22 22 34 34 34
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 34 34 34
+ 10 10 10 50 50 50 22 22 22 2 2 6
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 86 86 86 42 42 42 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 2 2 6
+ 38 38 38 116 116 116 94 94 94 22 22 22
+ 22 22 22 2 2 6 2 2 6 2 2 6
+ 14 14 14 86 86 86 138 138 138 162 162 162
+154 154 154 38 38 38 26 26 26 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 86 86 86 46 46 46 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 14 14 14
+134 134 134 198 198 198 195 195 195 116 116 116
+ 10 10 10 2 2 6 2 2 6 6 6 6
+101 98 89 187 187 187 210 210 210 218 218 218
+214 214 214 134 134 134 14 14 14 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 86 86 86 50 50 50 18 18 18 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 54 54 54
+218 218 218 195 195 195 226 226 226 246 246 246
+ 58 58 58 2 2 6 2 2 6 30 30 30
+210 210 210 253 253 253 174 174 174 123 123 123
+221 221 221 234 234 234 74 74 74 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 82 82 82 2 2 6 106 106 106
+170 170 170 26 26 26 86 86 86 226 226 226
+123 123 123 10 10 10 14 14 14 46 46 46
+231 231 231 190 190 190 6 6 6 70 70 70
+ 90 90 90 238 238 238 158 158 158 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 86 86 86 6 6 6 116 116 116
+106 106 106 6 6 6 70 70 70 149 149 149
+128 128 128 18 18 18 38 38 38 54 54 54
+221 221 221 106 106 106 2 2 6 14 14 14
+ 46 46 46 190 190 190 198 198 198 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 62 62 62 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 94 94 94 14 14 14 101 101 101
+128 128 128 2 2 6 18 18 18 116 116 116
+118 98 46 121 92 8 121 92 8 98 78 10
+162 162 162 106 106 106 2 2 6 2 2 6
+ 2 2 6 195 195 195 195 195 195 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 62 62 62 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 1
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 90 90 90 14 14 14 58 58 58
+210 210 210 26 26 26 54 38 6 154 114 10
+226 170 11 236 186 11 225 175 15 184 144 12
+215 174 15 175 146 61 37 26 9 2 2 6
+ 70 70 70 246 246 246 138 138 138 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 66 66 66 26 26 26 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 14 14 14 10 10 10
+195 195 195 188 164 115 192 133 9 225 175 15
+239 182 13 234 190 10 232 195 16 232 200 30
+245 207 45 241 208 19 232 195 16 184 144 12
+218 194 134 211 206 186 42 42 42 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 50 50 50 74 74 74 30 30 30 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 86 86 86 14 14 14 2 2 6
+121 87 25 192 133 9 219 162 10 239 182 13
+236 186 11 232 195 16 241 208 19 244 214 54
+246 218 60 246 218 38 246 215 20 241 208 19
+241 208 19 226 184 13 121 87 25 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 50 50 50 82 82 82 34 34 34 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 82 82 82 30 30 30 61 42 6
+180 123 7 206 145 10 230 174 11 239 182 13
+234 190 10 238 202 15 241 208 19 246 218 74
+246 218 38 246 215 20 246 215 20 246 215 20
+226 184 13 215 174 15 184 144 12 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 26 26 26 94 94 94 42 42 42 14 14 14
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 50 50 50 104 69 6
+192 133 9 216 158 10 236 178 12 236 186 11
+232 195 16 241 208 19 244 214 54 245 215 43
+246 215 20 246 215 20 241 208 19 198 155 10
+200 144 11 216 158 10 156 118 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 90 90 90 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 46 46 46 22 22 22
+137 92 6 210 162 10 239 182 13 238 190 10
+238 202 15 241 208 19 246 215 20 246 215 20
+241 208 19 203 166 17 185 133 11 210 150 10
+216 158 10 210 150 10 102 78 10 2 2 6
+ 6 6 6 54 54 54 14 14 14 2 2 6
+ 2 2 6 62 62 62 74 74 74 30 30 30
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 78 78 78 50 50 50 6 6 6
+ 94 70 30 139 102 15 190 146 13 226 184 13
+232 200 30 232 195 16 215 174 15 190 146 13
+168 122 10 192 133 9 210 150 10 213 154 11
+202 150 34 182 157 106 101 98 89 2 2 6
+ 2 2 6 78 78 78 116 116 116 58 58 58
+ 2 2 6 22 22 22 90 90 90 46 46 46
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 50 50 50 6 6 6
+128 128 128 174 154 114 156 107 11 168 122 10
+198 155 10 184 144 12 197 138 11 200 144 11
+206 145 10 206 145 10 197 138 11 188 164 115
+195 195 195 198 198 198 174 174 174 14 14 14
+ 2 2 6 22 22 22 116 116 116 116 116 116
+ 22 22 22 2 2 6 74 74 74 70 70 70
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 101 101 101 26 26 26 10 10 10
+138 138 138 190 190 190 174 154 114 156 107 11
+197 138 11 200 144 11 197 138 11 192 133 9
+180 123 7 190 142 34 190 178 144 187 187 187
+202 202 202 221 221 221 214 214 214 66 66 66
+ 2 2 6 2 2 6 50 50 50 62 62 62
+ 6 6 6 2 2 6 10 10 10 90 90 90
+ 50 50 50 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 34 34 34
+ 74 74 74 74 74 74 2 2 6 6 6 6
+144 144 144 198 198 198 190 190 190 178 166 146
+154 121 60 156 107 11 156 107 11 168 124 44
+174 154 114 187 187 187 190 190 190 210 210 210
+246 246 246 253 253 253 253 253 253 182 182 182
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 62 62 62
+ 74 74 74 34 34 34 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 10 10 10 22 22 22 54 54 54
+ 94 94 94 18 18 18 2 2 6 46 46 46
+234 234 234 221 221 221 190 190 190 190 190 190
+190 190 190 187 187 187 187 187 187 190 190 190
+190 190 190 195 195 195 214 214 214 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+ 82 82 82 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 14 14 14
+ 86 86 86 54 54 54 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 46 46 46 90 90 90
+ 46 46 46 18 18 18 6 6 6 182 182 182
+253 253 253 246 246 246 206 206 206 190 190 190
+190 190 190 190 190 190 190 190 190 190 190 190
+206 206 206 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+202 202 202 14 14 14 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 42 42 42 86 86 86 42 42 42 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 14 14 14 38 38 38 74 74 74 66 66 66
+ 2 2 6 6 6 6 90 90 90 250 250 250
+253 253 253 253 253 253 238 238 238 198 198 198
+190 190 190 190 190 190 195 195 195 221 221 221
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 82 82 82 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 78 78 78 70 70 70 34 34 34
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 34 34 34 66 66 66 78 78 78 6 6 6
+ 2 2 6 18 18 18 218 218 218 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+226 226 226 231 231 231 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 178 178 178 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 18 18 18 90 90 90 62 62 62
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 26 26 26
+ 58 58 58 90 90 90 18 18 18 2 2 6
+ 2 2 6 110 110 110 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 18 18 18 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 94 94 94
+ 54 54 54 26 26 26 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 22 22 22 50 50 50
+ 90 90 90 26 26 26 2 2 6 2 2 6
+ 14 14 14 195 195 195 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 242 242 242 54 54 54 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+ 86 86 86 50 50 50 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 38 38 38 82 82 82
+ 34 34 34 2 2 6 2 2 6 2 2 6
+ 42 42 42 195 195 195 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 242 242 242 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 246 246 246 238 238 238
+226 226 226 231 231 231 101 101 101 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 38 38 38 82 82 82 42 42 42 14 14 14
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 26 26 26 62 62 62 66 66 66
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 70 70 70 170 170 170 206 206 206 234 234 234
+246 246 246 250 250 250 250 250 250 238 238 238
+226 226 226 231 231 231 238 238 238 250 250 250
+250 250 250 250 250 250 246 246 246 231 231 231
+214 214 214 206 206 206 202 202 202 202 202 202
+198 198 198 202 202 202 182 182 182 18 18 18
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 62 62 62 66 66 66 30 30 30
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 42 42 42 82 82 82 18 18 18
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 94 94 94 182 182 182 218 218 218 242 242 242
+250 250 250 253 253 253 253 253 253 250 250 250
+234 234 234 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+238 238 238 226 226 226 210 210 210 202 202 202
+195 195 195 195 195 195 210 210 210 158 158 158
+ 6 6 6 14 14 14 50 50 50 14 14 14
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 86 86 86 46 46 46
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 54 54 54 70 70 70 2 2 6
+ 2 2 6 10 10 10 2 2 6 22 22 22
+166 166 166 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+231 231 231 206 206 206 198 198 198 226 226 226
+ 94 94 94 2 2 6 6 6 6 38 38 38
+ 30 30 30 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 62 62 62 66 66 66
+ 26 26 26 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 74 74 74 50 50 50 2 2 6
+ 26 26 26 26 26 26 2 2 6 106 106 106
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 218 218 218 202 202 202
+210 210 210 14 14 14 2 2 6 2 2 6
+ 30 30 30 22 22 22 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 86 86 86
+ 42 42 42 14 14 14 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 90 90 90 22 22 22 2 2 6
+ 42 42 42 2 2 6 18 18 18 218 218 218
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 221 221 221
+218 218 218 101 101 101 2 2 6 14 14 14
+ 18 18 18 38 38 38 10 10 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 78 78 78
+ 58 58 58 22 22 22 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 54 54 54 82 82 82 2 2 6 26 26 26
+ 22 22 22 2 2 6 123 123 123 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+238 238 238 198 198 198 6 6 6 38 38 38
+ 58 58 58 26 26 26 38 38 38 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 78 78 78 30 30 30 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 30 30 30
+ 74 74 74 58 58 58 2 2 6 42 42 42
+ 2 2 6 22 22 22 231 231 231 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 46 46 46 38 38 38
+ 42 42 42 14 14 14 38 38 38 14 14 14
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 86 86 86 46 46 46 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 42 42 42
+ 90 90 90 18 18 18 18 18 18 26 26 26
+ 2 2 6 116 116 116 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 94 94 94 6 6 6
+ 2 2 6 2 2 6 10 10 10 34 34 34
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 10 10 10 26 26 26 66 66 66
+ 82 82 82 2 2 6 38 38 38 6 6 6
+ 14 14 14 210 210 210 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 246 246 246 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 144 144 144 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 42 42 42 74 74 74 30 30 30 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 42 42 42 90 90 90
+ 26 26 26 6 6 6 42 42 42 2 2 6
+ 74 74 74 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 242 242 242 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 182 182 182 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 10 10 10 86 86 86 38 38 38 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 26 26 26 66 66 66 82 82 82
+ 2 2 6 22 22 22 18 18 18 2 2 6
+149 149 149 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206 2 2 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 86 86 86 46 46 46 14 14 14
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 18 18 18 46 46 46 86 86 86 18 18 18
+ 2 2 6 34 34 34 10 10 10 6 6 6
+210 210 210 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 221 221 221 6 6 6
+ 2 2 6 2 2 6 6 6 6 30 30 30
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 82 82 82 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 26 26 26 66 66 66 62 62 62 2 2 6
+ 2 2 6 38 38 38 10 10 10 26 26 26
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 6 6 6
+ 2 2 6 2 2 6 10 10 10 30 30 30
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 58 58 58 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 78 78 78 6 6 6 2 2 6
+ 2 2 6 46 46 46 14 14 14 42 42 42
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 10 10 10
+ 2 2 6 2 2 6 22 22 22 14 14 14
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 62 62 62 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 74 74 74 2 2 6 2 2 6
+ 14 14 14 70 70 70 34 34 34 62 62 62
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 14 14 14
+ 2 2 6 2 2 6 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 62 62 62 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 54 54 54 62 62 62 2 2 6 2 2 6
+ 2 2 6 30 30 30 46 46 46 70 70 70
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 226 226 226 10 10 10
+ 2 2 6 6 6 6 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 58 58 58 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 58 58 58 62 62 62 2 2 6 2 2 6
+ 2 2 6 2 2 6 30 30 30 78 78 78
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206 2 2 6
+ 22 22 22 34 34 34 18 14 6 22 22 22
+ 26 26 26 18 18 18 6 6 6 2 2 6
+ 2 2 6 82 82 82 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 26 26 26
+ 62 62 62 106 106 106 74 54 14 185 133 11
+210 162 10 121 92 8 6 6 6 62 62 62
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 158 158 158 18 18 18
+ 14 14 14 2 2 6 2 2 6 2 2 6
+ 6 6 6 18 18 18 66 66 66 38 38 38
+ 6 6 6 94 94 94 50 50 50 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 10 10 10 10 10 10 18 18 18 38 38 38
+ 78 78 78 142 134 106 216 158 10 242 186 14
+246 190 14 246 190 14 156 118 10 10 10 10
+ 90 90 90 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 230 190
+238 204 91 238 204 91 181 142 44 37 26 9
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 38 38 38 46 46 46
+ 26 26 26 106 106 106 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 22 22 22
+ 30 30 30 38 38 38 50 50 50 70 70 70
+106 106 106 190 142 34 226 170 11 242 186 14
+246 190 14 246 190 14 246 190 14 154 114 10
+ 6 6 6 74 74 74 226 226 226 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 228 184 62
+241 196 14 241 208 19 232 195 16 38 30 10
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 30 30 30 26 26 26
+203 166 17 154 142 90 66 66 66 26 26 26
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 38 38 38 58 58 58
+ 78 78 78 86 86 86 101 101 101 123 123 123
+175 146 61 210 150 10 234 174 13 246 186 14
+246 190 14 246 190 14 246 190 14 238 190 10
+102 78 10 2 2 6 46 46 46 198 198 198
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 224 178 62
+242 186 14 241 196 14 210 166 10 22 18 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 6 6 6 121 92 8
+238 202 15 232 195 16 82 82 82 34 34 34
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 38 38 38 70 70 70 154 122 46
+190 142 34 200 144 11 197 138 11 197 138 11
+213 154 11 226 170 11 242 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+225 175 15 46 32 6 2 2 6 22 22 22
+158 158 158 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 242 242 242 224 178 62
+239 182 13 236 186 11 213 154 11 46 32 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 61 42 6 225 175 15
+238 190 10 236 186 11 112 100 78 42 42 42
+ 14 14 14 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 54 54 54 154 122 46 213 154 11
+226 170 11 230 174 11 226 170 11 226 170 11
+236 178 12 242 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+241 196 14 184 144 12 10 10 10 2 2 6
+ 6 6 6 116 116 116 242 242 242 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 198 198 198 214 170 54
+236 178 12 236 178 12 210 150 10 137 92 6
+ 18 14 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 70 47 6 200 144 11 236 178 12
+239 182 13 239 182 13 124 112 88 58 58 58
+ 22 22 22 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 70 70 70 180 133 36 226 170 11
+239 182 13 242 186 14 242 186 14 246 186 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 232 195 16 98 70 6 2 2 6
+ 2 2 6 2 2 6 66 66 66 221 221 221
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 206 206 206 198 198 198 214 166 58
+230 174 11 230 174 11 216 158 10 192 133 9
+163 110 8 116 81 8 102 78 10 116 81 8
+167 114 7 197 138 11 226 170 11 239 182 13
+242 186 14 242 186 14 162 146 94 78 78 78
+ 34 34 34 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 30 30 30 78 78 78 190 142 34 226 170 11
+239 182 13 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 241 196 14 203 166 17 22 18 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+218 218 218 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 206 206 206 198 198 198 202 162 69
+226 170 11 236 178 12 224 166 10 210 150 10
+200 144 11 197 138 11 192 133 9 197 138 11
+210 150 10 226 170 11 242 186 14 246 190 14
+246 190 14 246 186 14 225 175 15 124 112 88
+ 62 62 62 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 174 135 50 224 166 10
+239 182 13 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 241 196 14 139 102 15
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 78 78 78 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 214 214 214 198 198 198 190 150 46
+219 162 10 236 178 12 234 174 13 224 166 10
+216 158 10 213 154 11 213 154 11 216 158 10
+226 170 11 239 182 13 246 190 14 246 190 14
+246 190 14 246 190 14 242 186 14 206 162 42
+101 101 101 58 58 58 30 30 30 14 14 14
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 74 74 74 174 135 50 216 158 10
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 241 196 14 226 184 13
+ 61 42 6 2 2 6 2 2 6 2 2 6
+ 22 22 22 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 226 226 226 187 187 187 180 133 36
+216 158 10 236 178 12 239 182 13 236 178 12
+230 174 11 226 170 11 226 170 11 230 174 11
+236 178 12 242 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 186 14 239 182 13
+206 162 42 106 106 106 66 66 66 34 34 34
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 26 26 26 70 70 70 163 133 67 213 154 11
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 241 196 14
+190 146 13 18 14 6 2 2 6 2 2 6
+ 46 46 46 246 246 246 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 221 221 221 86 86 86 156 107 11
+216 158 10 236 178 12 242 186 14 246 186 14
+242 186 14 239 182 13 239 182 13 242 186 14
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+242 186 14 225 175 15 142 122 72 66 66 66
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 26 26 26 70 70 70 163 133 67 210 150 10
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+232 195 16 121 92 8 34 34 34 106 106 106
+221 221 221 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+242 242 242 82 82 82 18 14 6 163 110 8
+216 158 10 236 178 12 242 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 242 186 14 163 133 67
+ 46 46 46 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 163 133 67 210 150 10
+236 178 12 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+241 196 14 215 174 15 190 178 144 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 218 218 218
+ 58 58 58 2 2 6 22 18 6 167 114 7
+216 158 10 236 178 12 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 186 14 242 186 14 190 150 46
+ 54 54 54 22 22 22 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 38 38 38 86 86 86 180 133 36 213 154 11
+236 178 12 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 232 195 16 190 146 13 214 214 214
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 170 170 170 26 26 26
+ 2 2 6 2 2 6 37 26 9 163 110 8
+219 162 10 239 182 13 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 236 178 12 224 166 10 142 122 72
+ 46 46 46 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 109 106 95 192 133 9 224 166 10
+242 186 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+242 186 14 226 184 13 210 162 10 142 110 46
+226 226 226 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+198 198 198 66 66 66 2 2 6 2 2 6
+ 2 2 6 2 2 6 50 34 6 156 107 11
+219 162 10 239 182 13 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 242 186 14
+234 174 13 213 154 11 154 122 46 66 66 66
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 58 58 58 154 121 60 206 145 10 234 174 13
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 236 178 12 210 162 10 163 110 8
+ 61 42 6 138 138 138 218 218 218 250 250 250
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 210 210 210 144 144 144 66 66 66
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 61 42 6 163 110 8
+216 158 10 236 178 12 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 239 182 13 230 174 11 216 158 10
+190 142 34 124 112 88 70 70 70 38 38 38
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 62 62 62 168 124 44 206 145 10 224 166 10
+236 178 12 239 182 13 242 186 14 242 186 14
+246 186 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 236 178 12 216 158 10 175 118 6
+ 80 54 7 2 2 6 6 6 6 30 30 30
+ 54 54 54 62 62 62 50 50 50 38 38 38
+ 14 14 14 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 80 54 7 167 114 7
+213 154 11 236 178 12 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 242 186 14 239 182 13 239 182 13
+230 174 11 210 150 10 174 135 50 124 112 88
+ 82 82 82 54 54 54 34 34 34 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 158 118 36 192 133 9 200 144 11
+216 158 10 219 162 10 224 166 10 226 170 11
+230 174 11 236 178 12 239 182 13 239 182 13
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 230 174 11 210 150 10 163 110 8
+104 69 6 10 10 10 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 91 60 6 167 114 7
+206 145 10 230 174 11 242 186 14 246 190 14
+246 190 14 246 190 14 246 186 14 242 186 14
+239 182 13 230 174 11 224 166 10 213 154 11
+180 133 36 124 112 88 86 86 86 58 58 58
+ 38 38 38 22 22 22 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 34 34 34 70 70 70 138 110 50 158 118 36
+167 114 7 180 123 7 192 133 9 197 138 11
+200 144 11 206 145 10 213 154 11 219 162 10
+224 166 10 230 174 11 239 182 13 242 186 14
+246 186 14 246 186 14 246 186 14 246 186 14
+239 182 13 216 158 10 185 133 11 152 99 6
+104 69 6 18 14 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 80 54 7 152 99 6
+192 133 9 219 162 10 236 178 12 239 182 13
+246 186 14 242 186 14 239 182 13 236 178 12
+224 166 10 206 145 10 192 133 9 154 121 60
+ 94 94 94 62 62 62 42 42 42 22 22 22
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 18 18 18 34 34 34 58 58 58 78 78 78
+101 98 89 124 112 88 142 110 46 156 107 11
+163 110 8 167 114 7 175 118 6 180 123 7
+185 133 11 197 138 11 210 150 10 219 162 10
+226 170 11 236 178 12 236 178 12 234 174 13
+219 162 10 197 138 11 163 110 8 130 83 6
+ 91 60 6 10 10 10 2 2 6 2 2 6
+ 18 18 18 38 38 38 38 38 38 38 38 38
+ 38 38 38 38 38 38 38 38 38 38 38 38
+ 38 38 38 38 38 38 26 26 26 2 2 6
+ 2 2 6 6 6 6 70 47 6 137 92 6
+175 118 6 200 144 11 219 162 10 230 174 11
+234 174 13 230 174 11 219 162 10 210 150 10
+192 133 9 163 110 8 124 112 88 82 82 82
+ 50 50 50 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 22 22 22 34 34 34
+ 42 42 42 58 58 58 74 74 74 86 86 86
+101 98 89 122 102 70 130 98 46 121 87 25
+137 92 6 152 99 6 163 110 8 180 123 7
+185 133 11 197 138 11 206 145 10 200 144 11
+180 123 7 156 107 11 130 83 6 104 69 6
+ 50 34 6 54 54 54 110 110 110 101 98 89
+ 86 86 86 82 82 82 78 78 78 78 78 78
+ 78 78 78 78 78 78 78 78 78 78 78 78
+ 78 78 78 82 82 82 86 86 86 94 94 94
+106 106 106 101 101 101 86 66 34 124 80 6
+156 107 11 180 123 7 192 133 9 200 144 11
+206 145 10 200 144 11 192 133 9 175 118 6
+139 102 15 109 106 95 70 70 70 42 42 42
+ 22 22 22 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 10 10 10
+ 14 14 14 22 22 22 30 30 30 38 38 38
+ 50 50 50 62 62 62 74 74 74 90 90 90
+101 98 89 112 100 78 121 87 25 124 80 6
+137 92 6 152 99 6 152 99 6 152 99 6
+138 86 6 124 80 6 98 70 6 86 66 30
+101 98 89 82 82 82 58 58 58 46 46 46
+ 38 38 38 34 34 34 34 34 34 34 34 34
+ 34 34 34 34 34 34 34 34 34 34 34 34
+ 34 34 34 34 34 34 38 38 38 42 42 42
+ 54 54 54 82 82 82 94 86 76 91 60 6
+134 86 6 156 107 11 167 114 7 175 118 6
+175 118 6 167 114 7 152 99 6 121 87 25
+101 98 89 62 62 62 34 34 34 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 6 6 6 10 10 10
+ 18 18 18 22 22 22 30 30 30 42 42 42
+ 50 50 50 66 66 66 86 86 86 101 98 89
+106 86 58 98 70 6 104 69 6 104 69 6
+104 69 6 91 60 6 82 62 34 90 90 90
+ 62 62 62 38 38 38 22 22 22 14 14 14
+ 10 10 10 10 10 10 10 10 10 10 10 10
+ 10 10 10 10 10 10 6 6 6 10 10 10
+ 10 10 10 10 10 10 10 10 10 14 14 14
+ 22 22 22 42 42 42 70 70 70 89 81 66
+ 80 54 7 104 69 6 124 80 6 137 92 6
+134 86 6 116 81 8 100 82 52 86 86 86
+ 58 58 58 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 10 10 10 14 14 14
+ 18 18 18 26 26 26 38 38 38 54 54 54
+ 70 70 70 86 86 86 94 86 76 89 81 66
+ 89 81 66 86 86 86 74 74 74 50 50 50
+ 30 30 30 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 34 34 34 58 58 58
+ 82 82 82 89 81 66 89 81 66 89 81 66
+ 94 86 66 94 86 76 74 74 74 50 50 50
+ 26 26 26 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 6 6 6 14 14 14 18 18 18
+ 30 30 30 38 38 38 46 46 46 54 54 54
+ 50 50 50 42 42 42 30 30 30 18 18 18
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 26 26 26
+ 38 38 38 50 50 50 58 58 58 58 58 58
+ 54 54 54 42 42 42 30 30 30 18 18 18
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 6 6 6 10 10 10 14 14 14 18 18 18
+ 18 18 18 14 14 14 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 14 14 14 18 18 18 22 22 22 22 22 22
+ 18 18 18 14 14 14 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
P3
-142 114
+# Standard 16-color Linux logo
+80 80
255
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 85 0 85 255 85 170 85 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 170 170 170
-170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 255 85
-255 85 85 85 255 85 170 170 170 170 85 0 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 85 85 85
-170 170 170 170 85 0 170 170 170 85 85 85 170 85 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
-85 85 85 85 85 85 170 85 0 85 255 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 85 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 170 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 85 0 85 255 85 170 85 0 170 85 0 170 85 0 85 255 85
-170 85 0 170 85 0 0 170 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 170 85 0
-255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 85 255 85 170 85 0 170 85 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-85 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 85 255 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 85 0 255 255 85 85 255 85 255 255 85
-170 170 170 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
-85 255 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 255 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 255 255 85
-170 85 0 170 85 0 0 170 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 85 0 85 255 85 255 255 85 170 170 170 255 255 255
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
-255 255 85 85 255 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 255 255 85 255 255 85 255 255 85 255 255 255 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 85 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 85 0 255 255 85 255 255 85 255 255 255 170 170 170
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-255 255 85 85 255 85 170 85 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-255 255 85 85 255 85 255 255 85 170 170 170 255 255 255 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 85 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-85 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 0
-170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 170 85 0 170 85 0
-170 85 0 85 255 85 255 255 85 85 85 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 255 85 170 170 170 170 170 170
-85 85 85 170 170 170 170 170 170 170 85 0 170 170 170 170 170 170
-85 255 85 170 170 170 170 85 0 170 170 170 85 255 85 255 85 85
-85 255 85 170 170 170 255 255 85 85 85 85 255 255 85 170 170 170
-85 255 85 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 255 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 170 85 0 0 170 0 85 85 85
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 255 85
-255 85 85 85 255 85 85 85 85 255 85 85 85 85 85 170 170 170
-170 85 0 170 170 170 85 85 85 85 255 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 85 85 85 85 85
-255 255 85 170 170 170 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 170 170 170 170 85 0 170 170 170
-170 170 170 255 255 85 170 170 170 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 170 85 0 170 85 0 0 170 0
-0 0 0 170 85 0 170 85 0 0 170 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
-170 170 170 85 85 85 85 85 85 170 170 170 170 85 0 85 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
-170 85 0 255 255 85 170 85 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-85 255 85 170 85 0 0 170 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 170 0 170 85 0 255 255 85
-85 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
-85 255 85 170 85 0 170 85 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 85 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 170 85 0
-0 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-255 255 85 85 255 85 170 85 0 170 85 0 85 255 85 170 85 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 85 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 255 255 85
-170 85 0 170 85 0 85 255 85 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 85 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 85 255 85
-170 85 0 255 255 85 170 85 0 85 255 85 170 85 0 170 85 0
-0 170 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 85 255 85 170 85 0
-255 255 85 170 85 0 0 170 0 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 170 85 0
-0 170 0 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-255 255 85 255 255 85 170 85 0 0 170 0 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 85 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 170 170 170
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
-170 170 170 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255
-255 255 255 170 170 170 170 170 170 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 255 255 255 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 255 255 255 255 255 255 255 255 255 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 170 170 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
-170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 255 255 255 255 255 255 0 0 0 0 0 0 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170 255 255 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-85 85 85 170 170 170 170 170 170 170 170 170 170 85 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 170 85 0
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 85 255 85 170 85 0 170 170 170 85 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 170 85 0 85 255 85
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 170 85 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 170 170 170 170 85 0 170 170 170 170 85 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 255 85 85 170 170 170 85 255 85 170 85 0
-85 85 85 85 85 85 170 85 0 85 85 85 170 170 170 85 85 85
-170 170 170 170 85 0 85 85 85 85 85 85 85 85 85 85 85 85
-170 85 0 85 255 85 85 85 85 85 85 85 85 85 85 170 85 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 170 170 170 170 85 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 255 85 170 170 170 170 170 170 170 85 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 255 85 255 85 85 170 170 170 170 170 170
-170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 85 0
-170 170 170 85 85 85 85 255 85 170 85 0 170 170 170 170 85 0
-170 170 170 170 170 170 170 85 0 85 85 85 85 85 85 85 255 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 170 170 170 170 170 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 255 255 85 85 85 85 85 85 85 85 85 85
-85 255 85 255 85 85 170 170 170 170 85 0 170 170 170 85 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 85 0 170 170 170 170 170 170 255 255 85
-170 170 170 255 85 85 170 170 170 170 170 170 255 255 85 170 170 170
-85 255 85 170 170 170 255 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 85 85 85
-85 85 85 170 85 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
-170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 85 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 170 170 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 170 170 85 85 85 170 170 170 170 85 0
-170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 255 255 255 85 170 170 170
-255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 255 255 85 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 85 85 170 170 170 170 170 170
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 85 85 85
-85 85 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 255 255 255
-255 255 85 255 255 255 255 255 85 170 170 170 170 170 170 170 85 0
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-255 255 255 255 255 255 255 255 85 255 255 255 255 255 255 170 170 170
-255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 170 170 170 170 170 170 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 85 170 170 170 255 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 170 85 0 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 255 255 85
-170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 255 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
-255 85 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 170 170
-255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 85
-170 170 170 170 85 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
-85 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 85
-170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-255 255 255 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 85 255 85
-255 85 85 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-170 170 170 170 170 170 255 255 85 170 170 170 255 85 85 85 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 170 170 170 255 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
-170 170 170 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 170 170 170 170 85 0 170 170 170 85 85 85
-170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 85 85 85
-85 255 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 85 0 170 170 170 85 255 85 170 85 0 170 170 170 85 85 85
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
-255 255 85 255 255 255 170 170 170 170 170 170 170 170 170 170 85 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 170 170
-170 85 0 170 85 0 170 170 170 85 255 85 85 85 85 170 170 170
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 85 85 85
-170 170 170 170 85 0 170 170 170 85 85 85 170 170 170 170 85 0
-170 170 170 85 255 85 170 85 0 170 170 170 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 170 170 255 255 85 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
-170 170 170 85 255 85 170 85 0 170 170 170 170 85 0 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 255 85 170 170 170 170 85 0 170 170 170 170 85 0 85 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 85 85 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
-170 170 170 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
-170 85 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 85 0
-85 85 85 255 85 85 85 255 85 170 85 0 170 170 170 170 170 170
-170 85 0 170 170 170 85 85 85 255 255 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 85 85 85 170 170 170
-85 255 85 255 85 85 170 170 170 85 255 85 255 85 85 85 255 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-85 85 85 85 255 85 255 85 85 170 170 170 85 255 85 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 85 85 85 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-85 85 85 255 255 85 170 170 170 170 85 0 170 170 170 85 85 85
-170 85 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
-170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 85 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 85 0 85 255 85 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-170 85 0 170 170 170 170 85 0 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 85 85 85
-170 85 0 85 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 85 0 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 255 85
-170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 85 0 170 170 170 170 170 170
-255 255 85 170 170 170 255 255 255 255 255 85 255 255 255 255 255 255
-170 170 170 255 255 85 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 170 170 170 255 255 255 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 255 255 255 255 255 85 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 170 170 170
-255 255 85 170 170 170 170 170 170 170 85 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 85 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 170 85 0 170 170 170
-255 255 85 170 170 170 255 255 85 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-170 85 0 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255 255 255 85 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 85 0 85 255 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 255 170 170 170 255 255 85 170 170 170 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 170 170 170
-170 85 0 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 85 0 85 85 85 170 85 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 85 0
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 255 85 170 85 0 170 170 170 170 85 0 170 170 170
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 85 85 85 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 170 170 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 170 170 170 255 255 255 255 255 255
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 170 170 170 170 170 170
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 0 0 0 0 0 0 255 255 255
+ 85 85 85 0 0 0 0 0 0 0 0 0
+255 255 255 170 170 170 0 0 0 85 85 85
+170 170 170 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 170 170 170
+ 85 85 85 0 0 0 0 0 0 0 0 0
+255 255 255 85 85 85 0 0 0 0 0 0
+ 85 85 85 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 0 0 0 0 0 0 170 170 170
+ 85 85 85 85 85 85 85 85 85 85 85 85
+255 255 255 85 85 85 0 0 0 0 0 0
+ 85 85 85 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 170 170 170 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 170 170 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 170 85 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 85 85 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 85 85 85 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 170 170 170 170 170 170 170 170 0 0 0
+ 0 0 0 0 0 0 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 85 85 85
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 85 85 85
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+ 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 85 85 85 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+ 85 85 85 0 0 0 0 0 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 170 85 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 85 85 85 85 85 85 170 85 0
+170 85 0 170 85 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <mach/bridge-regs.h>
#include <plat/orion5x_wdt.h>
/*
char *buf)
{
return sprintf(buf, "%llu\n",
- (u64)balloon_stats.target_pages << PAGE_SHIFT);
+ (unsigned long long)balloon_stats.target_pages
+ << PAGE_SHIFT);
}
static ssize_t store_target(struct sys_device *dev,
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
--------------------------------------------------------------------------
+Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter
+
+File: cis/LA-PCM.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
File: ositech/Xilinx7OD.bin
--- /dev/null
+:100000000105D4F953E9FF17035338FF20040FC04B
+:1000100002002102060315390401416C6C69656414
+:100020002054656C657369732C4B2E4B00457468C6
+:1000300065726E6574204C414E20436172640043CA
+:10004000656E747265434F4D004C412D50434D0019
+:10005000FF1A0602100000020B1B08810108E06075
+:1000600000021F1B08820108E06020021F1B08839A
+:100070000108E06040021F1B08840108E060600284
+:100080001F1B08850108E06080021F1B088601080D
+:10009000E060A0021F1B08870108E060C0021F1B70
+:1000A00008880108E060E0021F1B08890108E06081
+:1000B00000031F1B088A0108E06020031F1B088B38
+:1000C0000108E06040031F1B088C0108E06060032A
+:1000D0001F1B088D0108E06080031F1B088E0108AC
+:1000E000E060A0031F1B088F0108E060C0031F1B16
+:0D00F00008900108E060E0031F1400FF000D
+:00000001FF
+#
+# Replacement CIS for Allied Telesis LA-PCM
+#
* Otherwise it's an offset mount and we need to check
* if we can umount its mount, if there is one.
*/
- if (!d_mountpoint(dentry))
+ if (!d_mountpoint(dentry)) {
+ status = 0;
goto done;
+ }
}
/* Update the expiry counter if fs is busy */
prstatus->pr_sigpend = p->pending.signal.sig[0];
prstatus->pr_sighold = p->blocked.sig[0];
prstatus->pr_pid = task_pid_vnr(p);
- prstatus->pr_ppid = task_pid_vnr(p->parent);
+ prstatus->pr_ppid = task_pid_vnr(p->real_parent);
prstatus->pr_pgrp = task_pgrp_vnr(p);
prstatus->pr_sid = task_session_vnr(p);
if (thread_group_leader(p)) {
psinfo->pr_psargs[len] = 0;
psinfo->pr_pid = task_pid_vnr(p);
- psinfo->pr_ppid = task_pid_vnr(p->parent);
+ psinfo->pr_ppid = task_pid_vnr(p->real_parent);
psinfo->pr_pgrp = task_pgrp_vnr(p);
psinfo->pr_sid = task_session_vnr(p);
{
struct bio_vec *bvl;
- /*
- * If 'bs' is given, lookup the pool and do the mempool alloc.
- * If not, this is a bio_kmalloc() allocation and just do a
- * kzalloc() for the exact number of vecs right away.
- */
- if (!bs)
- bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask);
-
/*
* see comment near bvec_array define!
*/
mempool_free(p, bs->bio_pool);
}
-/*
- * default destructor for a bio allocated with bio_alloc_bioset()
- */
-static void bio_fs_destructor(struct bio *bio)
-{
- bio_free(bio, fs_bio_set);
-}
-
-static void bio_kmalloc_destructor(struct bio *bio)
-{
- if (bio_has_allocated_vec(bio))
- kfree(bio->bi_io_vec);
- kfree(bio);
-}
-
void bio_init(struct bio *bio)
{
memset(bio, 0, sizeof(*bio));
**/
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
+ unsigned long idx = BIO_POOL_NONE;
struct bio_vec *bvl = NULL;
- struct bio *bio = NULL;
- unsigned long idx = 0;
- void *p = NULL;
-
- if (bs) {
- p = mempool_alloc(bs->bio_pool, gfp_mask);
- if (!p)
- goto err;
- bio = p + bs->front_pad;
- } else {
- bio = kmalloc(sizeof(*bio), gfp_mask);
- if (!bio)
- goto err;
- }
+ struct bio *bio;
+ void *p;
+
+ p = mempool_alloc(bs->bio_pool, gfp_mask);
+ if (unlikely(!p))
+ return NULL;
+ bio = p + bs->front_pad;
bio_init(bio);
nr_iovecs = bvec_nr_vecs(idx);
}
+out_set:
bio->bi_flags |= idx << BIO_POOL_OFFSET;
bio->bi_max_vecs = nr_iovecs;
-out_set:
bio->bi_io_vec = bvl;
-
return bio;
err_free:
- if (bs)
- mempool_free(p, bs->bio_pool);
- else
- kfree(bio);
-err:
+ mempool_free(p, bs->bio_pool);
return NULL;
}
+static void bio_fs_destructor(struct bio *bio)
+{
+ bio_free(bio, fs_bio_set);
+}
+
+/**
+ * bio_alloc - allocate a new bio, memory pool backed
+ * @gfp_mask: allocation mask to use
+ * @nr_iovecs: number of iovecs
+ *
+ * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask
+ * contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ *
+ * RETURNS:
+ * Pointer to new bio on success, NULL on failure.
+ */
+struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
+{
+ struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
+
+ if (bio)
+ bio->bi_destructor = bio_fs_destructor;
+
+ return bio;
+}
+
+static void bio_kmalloc_destructor(struct bio *bio)
+{
+ if (bio_integrity(bio))
+ bio_integrity_free(bio);
+ kfree(bio);
+}
+
/**
* bio_alloc - allocate a bio for I/O
* @gfp_mask: the GFP_ mask given to the slab allocator
* do so can cause livelocks under memory pressure.
*
**/
-struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
-{
- struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
-
- if (bio)
- bio->bi_destructor = bio_fs_destructor;
-
- return bio;
-}
-
-/*
- * Like bio_alloc(), but doesn't use a mempool backing. This means that
- * it CAN fail, but while bio_alloc() can only be used for allocations
- * that have a short (finite) life span, bio_kmalloc() should be used
- * for more permanent bio allocations (like allocating some bio's for
- * initalization or setup purposes).
- */
struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
{
- struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL);
+ struct bio *bio;
- if (bio)
- bio->bi_destructor = bio_kmalloc_destructor;
+ bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
+ gfp_mask);
+ if (unlikely(!bio))
+ return NULL;
+
+ bio_init(bio);
+ bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET;
+ bio->bi_max_vecs = nr_iovecs;
+ bio->bi_io_vec = bio->bi_inline_vecs;
+ bio->bi_destructor = bio_kmalloc_destructor;
return bio;
}
len += iov[i].iov_len;
}
+ if (offset)
+ nr_pages++;
+
bmd = bio_alloc_map_data(nr_pages, iov_count, gfp_mask);
if (!bmd)
return ERR_PTR(-ENOMEM);
ret = -ENOMEM;
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
goto out_bmd;
if (!nr_pages)
return ERR_PTR(-EINVAL);
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
int offset, i;
struct bio *bio;
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
-ifneq ($(KERNELRELEASE),)
-# kbuild part of makefile
obj-$(CONFIG_BTRFS_FS) := btrfs.o
-btrfs-y := super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
+
+btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
file-item.o inode-item.o inode-map.o disk-io.o \
transaction.o inode.o file.o tree-defrag.o \
extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \
compression.o delayed-ref.o
-else
-
-# Normal Makefile
-
-KERNELDIR := /lib/modules/`uname -r`/build
-all:
- $(MAKE) -C $(KERNELDIR) M=`pwd` CONFIG_BTRFS_FS=m modules
-
-modules_install:
- $(MAKE) -C $(KERNELDIR) M=`pwd` modules_install
-clean:
- $(MAKE) -C $(KERNELDIR) M=`pwd` clean
-
-endif
return ERR_PTR(-EINVAL);
}
+ /* Handle the cached NULL acl case without locking */
+ acl = ACCESS_ONCE(*p_acl);
+ if (!acl)
+ return acl;
+
spin_lock(&inode->i_lock);
- if (*p_acl != BTRFS_ACL_NOT_CACHED)
- acl = posix_acl_dup(*p_acl);
+ acl = *p_acl;
+ if (acl != BTRFS_ACL_NOT_CACHED)
+ acl = posix_acl_dup(acl);
spin_unlock(&inode->i_lock);
- if (acl)
+ if (acl != BTRFS_ACL_NOT_CACHED)
return acl;
-
size = __btrfs_getxattr(inode, name, "", 0);
if (size > 0) {
value = kzalloc(size, GFP_NOFS);
btrfs_update_cached_acl(inode, p_acl, acl);
}
kfree(value);
- } else if (size == -ENOENT) {
+ } else if (size == -ENOENT || size == -ENODATA || size == 0) {
+ /* FIXME, who returns -ENOENT? I think nobody */
acl = NULL;
btrfs_update_cached_acl(inode, p_acl, acl);
+ } else {
+ acl = ERR_PTR(-EIO);
}
return acl;
u64 metadata_alloc_profile;
u64 system_alloc_profile;
+ unsigned data_chunk_allocations;
+ unsigned metadata_ratio;
+
void *bdev_holder;
};
extern struct file_operations btrfs_file_operations;
int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
- u64 start, u64 end, u64 inline_limit, u64 *hint_block);
+ u64 start, u64 end, u64 locked_end,
+ u64 inline_limit, u64 *hint_block);
int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 start, u64 end);
memcpy(&found, result, csum_size);
read_extent_buffer(buf, &val, 0, csum_size);
- printk(KERN_INFO "btrfs: %s checksum verify failed "
- "on %llu wanted %X found %X level %d\n",
- root->fs_info->sb->s_id,
- buf->start, val, found, btrfs_header_level(buf));
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs: %s checksum verify "
+ "failed on %llu wanted %X found %X "
+ "level %d\n",
+ root->fs_info->sb->s_id,
+ (unsigned long long)buf->start, val, found,
+ btrfs_header_level(buf));
+ }
if (result != (char *)&inline_result)
kfree(result);
return 1;
ret = 0;
goto out;
}
- printk("parent transid verify failed on %llu wanted %llu found %llu\n",
- (unsigned long long)eb->start,
- (unsigned long long)parent_transid,
- (unsigned long long)btrfs_header_generation(eb));
+ if (printk_ratelimit()) {
+ printk("parent transid verify failed on %llu wanted %llu "
+ "found %llu\n",
+ (unsigned long long)eb->start,
+ (unsigned long long)parent_transid,
+ (unsigned long long)btrfs_header_generation(eb));
+ }
ret = 1;
clear_extent_buffer_uptodate(io_tree, eb);
out:
found_start = btrfs_header_bytenr(eb);
if (found_start != start) {
- printk(KERN_INFO "btrfs bad tree block start %llu %llu\n",
- (unsigned long long)found_start,
- (unsigned long long)eb->start);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs bad tree block start "
+ "%llu %llu\n",
+ (unsigned long long)found_start,
+ (unsigned long long)eb->start);
+ }
ret = -EIO;
goto err;
}
goto err;
}
if (check_tree_block_fsid(root, eb)) {
- printk(KERN_INFO "btrfs bad fsid on block %llu\n",
- (unsigned long long)eb->start);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs bad fsid on block %llu\n",
+ (unsigned long long)eb->start);
+ }
ret = -EIO;
goto err;
}
btrfs_set_work_high_prio(&async->work);
btrfs_queue_worker(&fs_info->workers, &async->work);
-#if 0
- int limit = btrfs_async_submit_limit(fs_info);
- if (atomic_read(&fs_info->nr_async_submits) > limit) {
- wait_event_timeout(fs_info->async_submit_wait,
- (atomic_read(&fs_info->nr_async_submits) < limit),
- HZ/10);
- wait_event_timeout(fs_info->async_submit_wait,
- (atomic_read(&fs_info->nr_async_bios) < limit),
- HZ/10);
- }
-#endif
while (atomic_read(&fs_info->async_submit_draining) &&
atomic_read(&fs_info->nr_async_submits)) {
wait_event(fs_info->async_submit_wait,
}
}
-#if 0
-static int btree_writepage(struct page *page, struct writeback_control *wbc)
-{
- struct buffer_head *bh;
- struct btrfs_root *root = BTRFS_I(page->mapping->host)->root;
- struct buffer_head *head;
- if (!page_has_buffers(page)) {
- create_empty_buffers(page, root->fs_info->sb->s_blocksize,
- (1 << BH_Dirty)|(1 << BH_Uptodate));
- }
- head = page_buffers(page);
- bh = head;
- do {
- if (buffer_dirty(bh))
- csum_tree_block(root, bh, 0);
- bh = bh->b_this_page;
- } while (bh != head);
- return block_write_full_page(page, btree_get_block, wbc);
-}
-#endif
-
static struct address_space_operations btree_aops = {
.readpage = btree_readpage,
.writepage = btree_writepage,
int ret = 0;
struct btrfs_device *device;
struct backing_dev_info *bdi;
-#if 0
- if ((bdi_bits & (1 << BDI_write_congested)) &&
- btrfs_congested_async(info, 0))
- return 1;
-#endif
+
list_for_each_entry(device, &info->fs_devices->devices, dev_list) {
if (!device->bdev)
continue;
fs_info->btree_inode = new_inode(sb);
fs_info->btree_inode->i_ino = 1;
fs_info->btree_inode->i_nlink = 1;
+ fs_info->metadata_ratio = 8;
fs_info->thread_pool_size = min_t(unsigned long,
num_online_cpus() + 2, 8);
if (features) {
printk(KERN_ERR "BTRFS: couldn't mount because of "
"unsupported optional features (%Lx).\n",
- features);
+ (unsigned long long)features);
err = -EINVAL;
goto fail_iput;
}
if (!(sb->s_flags & MS_RDONLY) && features) {
printk(KERN_ERR "BTRFS: couldn't mount RDWR because of "
"unsupported option features (%Lx).\n",
- features);
+ (unsigned long long)features);
err = -EINVAL;
goto fail_iput;
}
if (fs_info->delalloc_bytes) {
printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
- fs_info->delalloc_bytes);
+ (unsigned long long)fs_info->delalloc_bytes);
}
if (fs_info->total_ref_cache_size) {
printk(KERN_INFO "btrfs: at umount reference cache size %llu\n",
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
-#if 0
- while (!list_empty(&fs_info->hashers)) {
- struct btrfs_hasher *hasher;
- hasher = list_entry(fs_info->hashers.next, struct btrfs_hasher,
- hashers);
- list_del(&hasher->hashers);
- crypto_free_hash(&fs_info->hash_tfm);
- kfree(hasher);
- }
-#endif
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
", %llu bytes_used, %llu bytes_reserved, "
"%llu bytes_pinned, %llu bytes_readonly, %llu may use"
- "%llu total\n", bytes, data_sinfo->bytes_delalloc,
- data_sinfo->bytes_used, data_sinfo->bytes_reserved,
- data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
- data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+ "%llu total\n", (unsigned long long)bytes,
+ (unsigned long long)data_sinfo->bytes_delalloc,
+ (unsigned long long)data_sinfo->bytes_used,
+ (unsigned long long)data_sinfo->bytes_reserved,
+ (unsigned long long)data_sinfo->bytes_pinned,
+ (unsigned long long)data_sinfo->bytes_readonly,
+ (unsigned long long)data_sinfo->bytes_may_use,
+ (unsigned long long)data_sinfo->total_bytes);
return -ENOSPC;
}
data_sinfo->bytes_may_use += bytes;
spin_unlock(&info->lock);
}
+static void force_metadata_allocation(struct btrfs_fs_info *info)
+{
+ struct list_head *head = &info->space_info;
+ struct btrfs_space_info *found;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(found, head, list) {
+ if (found->flags & BTRFS_BLOCK_GROUP_METADATA)
+ found->force_alloc = 1;
+ }
+ rcu_read_unlock();
+}
+
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force)
{
struct btrfs_space_info *space_info;
+ struct btrfs_fs_info *fs_info = extent_root->fs_info;
u64 thresh;
int ret = 0;
- mutex_lock(&extent_root->fs_info->chunk_mutex);
+ mutex_lock(&fs_info->chunk_mutex);
flags = btrfs_reduce_alloc_profile(extent_root, flags);
}
spin_unlock(&space_info->lock);
+ /*
+ * if we're doing a data chunk, go ahead and make sure that
+ * we keep a reasonable number of metadata chunks allocated in the
+ * FS as well.
+ */
+ if (flags & BTRFS_BLOCK_GROUP_DATA) {
+ fs_info->data_chunk_allocations++;
+ if (!(fs_info->data_chunk_allocations %
+ fs_info->metadata_ratio))
+ force_metadata_allocation(fs_info);
+ }
+
ret = btrfs_alloc_chunk(trans, extent_root, flags);
if (ret)
space_info->full = 1;
info->bytes_pinned - info->bytes_reserved),
(info->full) ? "" : "not ");
printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
- " may_use=%llu, used=%llu\n", info->total_bytes,
- info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
- info->bytes_used);
+ " may_use=%llu, used=%llu\n",
+ (unsigned long long)info->total_bytes,
+ (unsigned long long)info->bytes_pinned,
+ (unsigned long long)info->bytes_delalloc,
+ (unsigned long long)info->bytes_may_use,
+ (unsigned long long)info->bytes_used);
down_read(&info->groups_sem);
list_for_each_entry(cache, &info->block_groups, list) {
#include "ctree.h"
#include "btrfs_inode.h"
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *, struct kmem_cache *,
- unsigned long));
-
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
int __init extent_io_init(void)
{
- extent_state_cache = btrfs_cache_create("extent_state",
- sizeof(struct extent_state), 0,
- NULL);
+ extent_state_cache = kmem_cache_create("extent_state",
+ sizeof(struct extent_state), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_state_cache)
return -ENOMEM;
- extent_buffer_cache = btrfs_cache_create("extent_buffers",
- sizeof(struct extent_buffer), 0,
- NULL);
+ extent_buffer_cache = kmem_cache_create("extent_buffers",
+ sizeof(struct extent_buffer), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_buffer_cache)
goto free_state_cache;
return 0;
return total_bytes;
}
-#if 0
-/*
- * helper function to lock both pages and extents in the tree.
- * pages must be locked first.
- */
-static int lock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
- unsigned long index = start >> PAGE_CACHE_SHIFT;
- unsigned long end_index = end >> PAGE_CACHE_SHIFT;
- struct page *page;
- int err;
-
- while (index <= end_index) {
- page = grab_cache_page(tree->mapping, index);
- if (!page) {
- err = -ENOMEM;
- goto failed;
- }
- if (IS_ERR(page)) {
- err = PTR_ERR(page);
- goto failed;
- }
- index++;
- }
- lock_extent(tree, start, end, GFP_NOFS);
- return 0;
-
-failed:
- /*
- * we failed above in getting the page at 'index', so we undo here
- * up to but not including the page at 'index'
- */
- end_index = index;
- index = start >> PAGE_CACHE_SHIFT;
- while (index < end_index) {
- page = find_get_page(tree->mapping, index);
- unlock_page(page);
- page_cache_release(page);
- index++;
- }
- return err;
-}
-
-/*
- * helper function to unlock both pages and extents in the tree.
- */
-static int unlock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
- unsigned long index = start >> PAGE_CACHE_SHIFT;
- unsigned long end_index = end >> PAGE_CACHE_SHIFT;
- struct page *page;
-
- while (index <= end_index) {
- page = find_get_page(tree->mapping, index);
- unlock_page(page);
- page_cache_release(page);
- index++;
- }
- unlock_extent(tree, start, end, GFP_NOFS);
- return 0;
-}
-#endif
-
/*
* set the private field for a given byte offset in the tree. If there isn't
* an extent_state there already, this does nothing.
#include <linux/hardirq.h>
#include "extent_map.h"
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *, struct kmem_cache *,
- unsigned long));
static struct kmem_cache *extent_map_cache;
int __init extent_map_init(void)
{
- extent_map_cache = btrfs_cache_create("extent_map",
- sizeof(struct extent_map), 0,
- NULL);
+ extent_map_cache = kmem_cache_create("extent_map",
+ sizeof(struct extent_map), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_map_cache)
return -ENOMEM;
return 0;
tree->map.rb_node = NULL;
spin_lock_init(&tree->lock);
}
-EXPORT_SYMBOL(extent_map_tree_init);
/**
* alloc_extent_map - allocate new extent map structure
atomic_set(&em->refs, 1);
return em;
}
-EXPORT_SYMBOL(alloc_extent_map);
/**
* free_extent_map - drop reference count of an extent_map
kmem_cache_free(extent_map_cache, em);
}
}
-EXPORT_SYMBOL(free_extent_map);
static struct rb_node *tree_insert(struct rb_root *root, u64 offset,
struct rb_node *node)
out:
return ret;
}
-EXPORT_SYMBOL(add_extent_mapping);
/* simple helper to do math around the end of an extent, handling wrap */
static u64 range_end(u64 start, u64 len)
out:
return em;
}
-EXPORT_SYMBOL(lookup_extent_mapping);
/**
* remove_extent_mapping - removes an extent_map from the extent tree
em->in_tree = 0;
return ret;
}
-EXPORT_SYMBOL(remove_extent_mapping);
return 0;
}
-int btrfs_check_file(struct btrfs_root *root, struct inode *inode)
-{
- return 0;
-#if 0
- struct btrfs_path *path;
- struct btrfs_key found_key;
- struct extent_buffer *leaf;
- struct btrfs_file_extent_item *extent;
- u64 last_offset = 0;
- int nritems;
- int slot;
- int found_type;
- int ret;
- int err = 0;
- u64 extent_end = 0;
-
- path = btrfs_alloc_path();
- ret = btrfs_lookup_file_extent(NULL, root, path, inode->i_ino,
- last_offset, 0);
- while (1) {
- nritems = btrfs_header_nritems(path->nodes[0]);
- if (path->slots[0] >= nritems) {
- ret = btrfs_next_leaf(root, path);
- if (ret)
- goto out;
- nritems = btrfs_header_nritems(path->nodes[0]);
- }
- slot = path->slots[0];
- leaf = path->nodes[0];
- btrfs_item_key_to_cpu(leaf, &found_key, slot);
- if (found_key.objectid != inode->i_ino)
- break;
- if (found_key.type != BTRFS_EXTENT_DATA_KEY)
- goto out;
-
- if (found_key.offset < last_offset) {
- WARN_ON(1);
- btrfs_print_leaf(root, leaf);
- printk(KERN_ERR "inode %lu found offset %llu "
- "expected %llu\n", inode->i_ino,
- (unsigned long long)found_key.offset,
- (unsigned long long)last_offset);
- err = 1;
- goto out;
- }
- extent = btrfs_item_ptr(leaf, slot,
- struct btrfs_file_extent_item);
- found_type = btrfs_file_extent_type(leaf, extent);
- if (found_type == BTRFS_FILE_EXTENT_REG) {
- extent_end = found_key.offset +
- btrfs_file_extent_num_bytes(leaf, extent);
- } else if (found_type == BTRFS_FILE_EXTENT_INLINE) {
- struct btrfs_item *item;
- item = btrfs_item_nr(leaf, slot);
- extent_end = found_key.offset +
- btrfs_file_extent_inline_len(leaf, extent);
- extent_end = (extent_end + root->sectorsize - 1) &
- ~((u64)root->sectorsize - 1);
- }
- last_offset = extent_end;
- path->slots[0]++;
- }
- if (0 && last_offset < inode->i_size) {
- WARN_ON(1);
- btrfs_print_leaf(root, leaf);
- printk(KERN_ERR "inode %lu found offset %llu size %llu\n",
- inode->i_ino, (unsigned long long)last_offset,
- (unsigned long long)inode->i_size);
- err = 1;
-
- }
-out:
- btrfs_free_path(path);
- return err;
-#endif
-}
-
/*
* this is very complex, but the basic idea is to drop all extents
* in the range start - end. hint_block is filled in with a block number
*/
noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
- u64 start, u64 end, u64 inline_limit, u64 *hint_byte)
+ u64 start, u64 end, u64 locked_end,
+ u64 inline_limit, u64 *hint_byte)
{
u64 extent_end = 0;
- u64 locked_end = end;
u64 search_start = start;
u64 leaf_start;
u64 ram_bytes = 0;
u64 orig_parent = 0;
u64 disk_bytenr = 0;
+ u64 orig_locked_end = locked_end;
u8 compression;
u8 encryption;
u16 other_encoding = 0;
}
out:
btrfs_free_path(path);
- if (locked_end > end) {
- unlock_extent(&BTRFS_I(inode)->io_tree, end, locked_end - 1,
- GFP_NOFS);
+ if (locked_end > orig_locked_end) {
+ unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end,
+ locked_end - 1, GFP_NOFS);
}
- btrfs_check_file(root, inode);
return ret;
}
printk(KERN_ERR "couldn't find space %llu to free\n",
(unsigned long long)offset);
printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
- block_group->cached, block_group->key.objectid,
- block_group->key.offset);
+ block_group->cached,
+ (unsigned long long)block_group->key.objectid,
+ (unsigned long long)block_group->key.offset);
btrfs_dump_free_space(block_group, bytes);
} else if (info) {
printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
"but wanted offset=%llu bytes=%llu\n",
- info->offset, info->bytes, offset, bytes);
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes,
+ (unsigned long long)offset,
+ (unsigned long long)bytes);
}
WARN_ON(1);
}
info = rb_entry(n, struct btrfs_free_space, offset_index);
if (info->bytes >= bytes)
count++;
- printk(KERN_ERR "entry offset %llu, bytes %llu\n", info->offset,
- info->bytes);
+ printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes);
}
printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
"\n", count);
}
path = btrfs_alloc_path();
BUG_ON(!path);
- search_start = max(search_start, BTRFS_FIRST_FREE_OBJECTID);
+ search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID);
search_key.objectid = search_start;
search_key.type = 0;
search_key.offset = 0;
static struct kmem_cache *btrfs_inode_cachep;
struct kmem_cache *btrfs_trans_handle_cachep;
struct kmem_cache *btrfs_transaction_cachep;
-struct kmem_cache *btrfs_bit_radix_cachep;
struct kmem_cache *btrfs_path_cachep;
#define S_SHIFT 12
}
ret = btrfs_drop_extents(trans, root, inode, start,
- aligned_end, start, &hint_byte);
+ aligned_end, aligned_end, start, &hint_byte);
BUG_ON(ret);
if (isize > actual_end)
struct inode *inode, u64 file_pos,
u64 disk_bytenr, u64 disk_num_bytes,
u64 num_bytes, u64 ram_bytes,
+ u64 locked_end,
u8 compression, u8 encryption,
u16 other_encoding, int extent_type)
{
path->leave_spinning = 1;
ret = btrfs_drop_extents(trans, root, inode, file_pos,
- file_pos + num_bytes, file_pos, &hint);
+ file_pos + num_bytes, locked_end,
+ file_pos, &hint);
BUG_ON(ret);
ins.objectid = inode->i_ino;
ordered_extent->disk_len,
ordered_extent->len,
ordered_extent->len,
+ ordered_extent->file_offset +
+ ordered_extent->len,
compressed, 0, 0,
BTRFS_FILE_EXTENT_REG);
BUG_ON(ret);
return 0;
zeroit:
- printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
- "private %llu\n", page->mapping->host->i_ino,
- (unsigned long long)start, csum,
- (unsigned long long)private);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
+ "private %llu\n", page->mapping->host->i_ino,
+ (unsigned long long)start, csum,
+ (unsigned long long)private);
+ }
memset(kaddr + offset, 1, end - start + 1);
flush_dcache_page(page);
kunmap_atomic(kaddr, KM_USER0);
btrfs_free_path(path);
}
+/*
+ * very simple check to peek ahead in the leaf looking for xattrs. If we
+ * don't find any xattrs, we know there can't be any acls.
+ *
+ * slot is the slot the inode is in, objectid is the objectid of the inode
+ */
+static noinline int acls_after_inode_item(struct extent_buffer *leaf,
+ int slot, u64 objectid)
+{
+ u32 nritems = btrfs_header_nritems(leaf);
+ struct btrfs_key found_key;
+ int scanned = 0;
+
+ slot++;
+ while (slot < nritems) {
+ btrfs_item_key_to_cpu(leaf, &found_key, slot);
+
+ /* we found a different objectid, there must not be acls */
+ if (found_key.objectid != objectid)
+ return 0;
+
+ /* we found an xattr, assume we've got an acl */
+ if (found_key.type == BTRFS_XATTR_ITEM_KEY)
+ return 1;
+
+ /*
+ * we found a key greater than an xattr key, there can't
+ * be any acls later on
+ */
+ if (found_key.type > BTRFS_XATTR_ITEM_KEY)
+ return 0;
+
+ slot++;
+ scanned++;
+
+ /*
+ * it goes inode, inode backrefs, xattrs, extents,
+ * so if there are a ton of hard links to an inode there can
+ * be a lot of backrefs. Don't waste time searching too hard,
+ * this is just an optimization
+ */
+ if (scanned >= 8)
+ break;
+ }
+ /* we hit the end of the leaf before we found an xattr or
+ * something larger than an xattr. We have to assume the inode
+ * has acls
+ */
+ return 1;
+}
+
/*
* read an inode from the btree into the in-memory inode
*/
struct btrfs_timespec *tspec;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key location;
+ int maybe_acls;
u64 alloc_group_block;
u32 rdev;
int ret;
alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
+ /*
+ * try to precache a NULL acl entry for files that don't have
+ * any xattrs or acls
+ */
+ maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino);
+ if (!maybe_acls) {
+ BTRFS_I(inode)->i_acl = NULL;
+ BTRFS_I(inode)->i_default_acl = NULL;
+ }
+
BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0,
alloc_group_block, 0);
btrfs_free_path(path);
err = btrfs_drop_extents(trans, root, inode,
cur_offset,
cur_offset + hole_size,
+ block_end,
cur_offset, &hint_byte);
if (err)
break;
{
struct btrfs_inode *bi = BTRFS_I(inode);
- bi->i_acl = NULL;
- bi->i_default_acl = NULL;
+ bi->i_acl = BTRFS_ACL_NOT_CACHED;
+ bi->i_default_acl = BTRFS_ACL_NOT_CACHED;
bi->generation = 0;
bi->sequence = 0;
kmem_cache_destroy(btrfs_trans_handle_cachep);
if (btrfs_transaction_cachep)
kmem_cache_destroy(btrfs_transaction_cachep);
- if (btrfs_bit_radix_cachep)
- kmem_cache_destroy(btrfs_bit_radix_cachep);
if (btrfs_path_cachep)
kmem_cache_destroy(btrfs_path_cachep);
}
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *))
-{
- return kmem_cache_create(name, size, 0, (SLAB_RECLAIM_ACCOUNT |
- SLAB_MEM_SPREAD | extra_flags), ctor);
-}
-
int btrfs_init_cachep(void)
{
- btrfs_inode_cachep = btrfs_cache_create("btrfs_inode_cache",
- sizeof(struct btrfs_inode),
- 0, init_once);
+ btrfs_inode_cachep = kmem_cache_create("btrfs_inode_cache",
+ sizeof(struct btrfs_inode), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, init_once);
if (!btrfs_inode_cachep)
goto fail;
- btrfs_trans_handle_cachep =
- btrfs_cache_create("btrfs_trans_handle_cache",
- sizeof(struct btrfs_trans_handle),
- 0, NULL);
+
+ btrfs_trans_handle_cachep = kmem_cache_create("btrfs_trans_handle_cache",
+ sizeof(struct btrfs_trans_handle), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_trans_handle_cachep)
goto fail;
- btrfs_transaction_cachep = btrfs_cache_create("btrfs_transaction_cache",
- sizeof(struct btrfs_transaction),
- 0, NULL);
+
+ btrfs_transaction_cachep = kmem_cache_create("btrfs_transaction_cache",
+ sizeof(struct btrfs_transaction), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_transaction_cachep)
goto fail;
- btrfs_path_cachep = btrfs_cache_create("btrfs_path_cache",
- sizeof(struct btrfs_path),
- 0, NULL);
+
+ btrfs_path_cachep = kmem_cache_create("btrfs_path_cache",
+ sizeof(struct btrfs_path), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_path_cachep)
goto fail;
- btrfs_bit_radix_cachep = btrfs_cache_create("btrfs_radix", 256,
- SLAB_DESTROY_BY_RCU, NULL);
- if (!btrfs_bit_radix_cachep)
- goto fail;
+
return 0;
fail:
btrfs_destroy_cachep();
static int prealloc_file_range(struct btrfs_trans_handle *trans,
struct inode *inode, u64 start, u64 end,
- u64 alloc_hint, int mode)
+ u64 locked_end, u64 alloc_hint, int mode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
ret = insert_reserved_file_extent(trans, inode,
cur_offset, ins.objectid,
ins.offset, ins.offset,
- ins.offset, 0, 0, 0,
+ ins.offset, locked_end,
+ 0, 0, 0,
BTRFS_FILE_EXTENT_PREALLOC);
BUG_ON(ret);
num_bytes -= ins.offset;
u64 alloc_start;
u64 alloc_end;
u64 alloc_hint = 0;
+ u64 locked_end;
u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
struct extent_map *em;
struct btrfs_trans_handle *trans;
goto out;
}
+ locked_end = alloc_end - 1;
while (1) {
struct btrfs_ordered_extent *ordered;
/* the extent lock is ordered inside the running
* transaction
*/
- lock_extent(&BTRFS_I(inode)->io_tree, alloc_start,
- alloc_end - 1, GFP_NOFS);
+ lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
+ GFP_NOFS);
ordered = btrfs_lookup_first_ordered_extent(inode,
alloc_end - 1);
if (ordered &&
ordered->file_offset < alloc_end) {
btrfs_put_ordered_extent(ordered);
unlock_extent(&BTRFS_I(inode)->io_tree,
- alloc_start, alloc_end - 1, GFP_NOFS);
+ alloc_start, locked_end, GFP_NOFS);
btrfs_end_transaction(trans, BTRFS_I(inode)->root);
/*
last_byte = (last_byte + mask) & ~mask;
if (em->block_start == EXTENT_MAP_HOLE) {
ret = prealloc_file_range(trans, inode, cur_offset,
- last_byte, alloc_hint, mode);
+ last_byte, locked_end + 1,
+ alloc_hint, mode);
if (ret < 0) {
free_extent_map(em);
break;
break;
}
}
- unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1,
+ unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
GFP_NOFS);
btrfs_end_transaction(trans, BTRFS_I(inode)->root);
*devstr = '\0';
devstr = vol_args->name;
devid = simple_strtoull(devstr, &end, 10);
- printk(KERN_INFO "resizing devid %llu\n", devid);
+ printk(KERN_INFO "resizing devid %llu\n",
+ (unsigned long long)devid);
}
device = btrfs_find_device(root, devid, NULL, NULL);
if (!device) {
- printk(KERN_INFO "resizer unable to find device %llu\n", devid);
+ printk(KERN_INFO "resizer unable to find device %llu\n",
+ (unsigned long long)devid);
ret = -EINVAL;
goto out_unlock;
}
BUG_ON(!trans);
/* punch hole in destination first */
- btrfs_drop_extents(trans, root, inode, off, off+len, 0, &hint_byte);
+ btrfs_drop_extents(trans, root, inode, off, off + len,
+ off + len, 0, &hint_byte);
/* clone data */
key.objectid = src->i_ino;
Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
Opt_ssd, Opt_thread_pool, Opt_noacl, Opt_compress, Opt_notreelog,
- Opt_flushoncommit, Opt_err,
+ Opt_ratio, Opt_flushoncommit, Opt_err,
};
static match_table_t tokens = {
{Opt_noacl, "noacl"},
{Opt_notreelog, "notreelog"},
{Opt_flushoncommit, "flushoncommit"},
+ {Opt_ratio, "metadata_ratio=%d"},
{Opt_err, NULL},
};
info->max_extent = max_t(u64,
info->max_extent, root->sectorsize);
printk(KERN_INFO "btrfs: max_extent at %llu\n",
- info->max_extent);
+ (unsigned long long)info->max_extent);
}
break;
case Opt_max_inline:
root->sectorsize);
}
printk(KERN_INFO "btrfs: max_inline at %llu\n",
- info->max_inline);
+ (unsigned long long)info->max_inline);
}
break;
case Opt_alloc_start:
kfree(num);
printk(KERN_INFO
"btrfs: allocations start at %llu\n",
- info->alloc_start);
+ (unsigned long long)info->alloc_start);
}
break;
case Opt_noacl:
printk(KERN_INFO "btrfs: turning on flush-on-commit\n");
btrfs_set_opt(info->mount_opt, FLUSHONCOMMIT);
break;
+ case Opt_ratio:
+ intarg = 0;
+ match_int(&args[0], &intarg);
+ if (intarg) {
+ info->metadata_ratio = intarg;
+ printk(KERN_INFO "btrfs: metadata ratio %d\n",
+ info->metadata_ratio);
+ }
+ break;
default:
break;
}
if (btrfs_test_opt(root, NOBARRIER))
seq_puts(seq, ",nobarrier");
if (info->max_extent != (u64)-1)
- seq_printf(seq, ",max_extent=%llu", info->max_extent);
+ seq_printf(seq, ",max_extent=%llu",
+ (unsigned long long)info->max_extent);
if (info->max_inline != 8192 * 1024)
- seq_printf(seq, ",max_inline=%llu", info->max_inline);
+ seq_printf(seq, ",max_inline=%llu",
+ (unsigned long long)info->max_inline);
if (info->alloc_start != 0)
- seq_printf(seq, ",alloc_start=%llu", info->alloc_start);
+ seq_printf(seq, ",alloc_start=%llu",
+ (unsigned long long)info->alloc_start);
if (info->thread_pool_size != min_t(unsigned long,
num_online_cpus() + 2, 8))
seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
prepare_to_wait(&info->transaction_wait, &wait,
TASK_UNINTERRUPTIBLE);
mutex_unlock(&info->trans_mutex);
+
+ atomic_dec(&info->throttles);
+ wake_up(&info->transaction_throttle);
+
schedule();
+
+ atomic_inc(&info->throttles);
mutex_lock(&info->trans_mutex);
finish_wait(&info->transaction_wait, &wait);
}
saved_nbytes = inode_get_bytes(inode);
/* drop any overlapping extents */
ret = btrfs_drop_extents(trans, root, inode,
- start, extent_end, start, &alloc_hint);
+ start, extent_end, extent_end, start, &alloc_hint);
BUG_ON(ret);
if (found_type == BTRFS_FILE_EXTENT_REG ||
btrfs_set_device_io_align(leaf, dev_item, device->io_align);
btrfs_set_device_io_width(leaf, dev_item, device->io_width);
btrfs_set_device_sector_size(leaf, dev_item, device->sector_size);
- btrfs_set_device_total_bytes(leaf, dev_item, device->total_bytes);
+ btrfs_set_device_total_bytes(leaf, dev_item, device->disk_total_bytes);
btrfs_set_device_bytes_used(leaf, dev_item, device->bytes_used);
btrfs_mark_buffer_dirty(leaf);
device->total_bytes = new_size;
if (device->writeable)
device->fs_devices->total_rw_bytes -= diff;
- ret = btrfs_update_device(trans, device);
- if (ret) {
- unlock_chunks(root);
- btrfs_end_transaction(trans, root);
- goto done;
- }
- WARN_ON(diff > old_total);
- btrfs_set_super_total_bytes(super_copy, old_total - diff);
unlock_chunks(root);
btrfs_end_transaction(trans, root);
length = btrfs_dev_extent_length(l, dev_extent);
if (key.offset + length <= new_size)
- goto done;
+ break;
chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
goto done;
}
+ /* Shrinking succeeded, else we would be at "done". */
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ lock_chunks(root);
+
+ device->disk_total_bytes = new_size;
+ /* Now btrfs_update_device() will change the on-disk size. */
+ ret = btrfs_update_device(trans, device);
+ if (ret) {
+ unlock_chunks(root);
+ btrfs_end_transaction(trans, root);
+ goto done;
+ }
+ WARN_ON(diff > old_total);
+ btrfs_set_super_total_bytes(super_copy, old_total - diff);
+ unlock_chunks(root);
+ btrfs_end_transaction(trans, root);
done:
btrfs_free_path(path);
return ret;
unsigned long ptr;
device->devid = btrfs_device_id(leaf, dev_item);
- device->total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+ device->disk_total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+ device->total_bytes = device->disk_total_bytes;
device->bytes_used = btrfs_device_bytes_used(leaf, dev_item);
device->type = btrfs_device_type(leaf, dev_item);
device->io_align = btrfs_device_io_align(leaf, dev_item);
/* size of the device */
u64 total_bytes;
+ /* size of the disk */
+ u64 disk_total_bytes;
+
/* bytes used */
u64 bytes_used;
if ((page->mapping != inode->i_mapping) ||
(page_offset(page) > size)) {
/* page got truncated out from underneath us */
- goto out_unlock;
+ unlock_page(page);
+ goto out;
}
/* page is wholly or partially inside EOF */
ret = block_commit_write(page, 0, end);
if (unlikely(ret)) {
+ unlock_page(page);
if (ret == -ENOMEM)
ret = VM_FAULT_OOM;
else /* -ENOSPC, -EIO, etc */
ret = VM_FAULT_SIGBUS;
- }
+ } else
+ ret = VM_FAULT_LOCKED;
-out_unlock:
- unlock_page(page);
+out:
return ret;
}
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
struct path path;
struct configfs_dirent *sd;
struct config_item *parent_item;
- struct config_item *target_item;
+ struct config_item *target_item = NULL;
struct config_item_type *type;
ret = -EPERM; /* What lack-of-symlink returns */
ecryptfs_inode = page->mapping->host;
crypt_stat =
&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
- if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page,
- 0, PAGE_CACHE_SIZE);
- if (rc)
- printk(KERN_ERR "%s: Error attempting to copy "
- "page at index [%ld]\n", __func__,
- page->index);
- goto out;
- }
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
enc_extent_page = alloc_page(GFP_USER);
if (!enc_extent_page) {
rc = -ENOMEM;
ecryptfs_inode = page->mapping->host;
crypt_stat =
&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
- if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
- PAGE_CACHE_SIZE,
- ecryptfs_inode);
- if (rc)
- printk(KERN_ERR "%s: Error attempting to copy "
- "page at index [%ld]\n", __func__,
- page->index);
- goto out;
- }
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
enc_extent_page = alloc_page(GFP_USER);
if (!enc_extent_page) {
rc = -ENOMEM;
#define ECRYPTFS_ENCRYPT_FILENAMES 0x00000800
#define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000
#define ECRYPTFS_ENCFN_USE_FEK 0x00002000
+#define ECRYPTFS_UNLINK_SIGS 0x00004000
u32 flags;
unsigned int file_version;
size_t iv_bytes;
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
lower_dir_dentry,
ecryptfs_dentry->d_name.len);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
lower_dentry = lookup_one_len(encrypted_and_encoded_name,
lower_dir_dentry,
encrypted_and_encoded_name_size - 1);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
{
char *lower_buf;
+ size_t lower_bufsiz;
struct dentry *lower_dentry;
- struct ecryptfs_crypt_stat *crypt_stat;
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
char *plaintext_name;
size_t plaintext_name_size;
mm_segment_t old_fs;
rc = -EINVAL;
goto out;
}
- crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ dentry->d_sb)->mount_crypt_stat;
+ /*
+ * If the lower filename is encrypted, it will result in a significantly
+ * longer name. If needed, truncate the name after decode and decrypt.
+ */
+ if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+ lower_bufsiz = PATH_MAX;
+ else
+ lower_bufsiz = bufsiz;
/* Released in this function */
- lower_buf = kmalloc(bufsiz, GFP_KERNEL);
+ lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
if (lower_buf == NULL) {
printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc [%d] bytes\n", __func__, bufsiz);
+ "kmalloc [%zd] bytes\n", __func__, lower_bufsiz);
rc = -ENOMEM;
goto out;
}
set_fs(get_ds());
rc = lower_dentry->d_inode->i_op->readlink(lower_dentry,
(char __user *)lower_buf,
- bufsiz);
+ lower_bufsiz);
set_fs(old_fs);
if (rc >= 0) {
rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
rc);
goto out_free_lower_buf;
}
- rc = copy_to_user(buf, plaintext_name, plaintext_name_size);
+ /* Check for bufsiz <= 0 done in sys_readlinkat() */
+ rc = copy_to_user(buf, plaintext_name,
+ min((size_t) bufsiz, plaintext_name_size));
if (rc)
rc = -EFAULT;
else
size_t num_zeros = (PAGE_CACHE_SIZE
- (new_length & ~PAGE_CACHE_MASK));
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+ rc = vmtruncate(inode, new_length);
+ if (rc)
+ goto out_free;
+ rc = vmtruncate(lower_dentry->d_inode, new_length);
+ goto out_free;
+ }
if (num_zeros) {
char *zeros_virt;
}
rc = 0;
crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
- mutex_unlock(&crypt_stat->cs_mutex);
- goto out;
}
}
mutex_unlock(&crypt_stat->cs_mutex);
init_special_inode(inode, lower_inode->i_mode,
lower_inode->i_rdev);
dentry->d_op = &ecryptfs_dops;
- if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
- d_add(dentry, inode);
- else
- d_instantiate(dentry, inode);
fsstack_copy_attr_all(inode, lower_inode, NULL);
/* This size will be overwritten for real files w/ headers and
* other metadata */
fsstack_copy_inode_size(inode, lower_inode);
+ if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
+ d_add(dentry, inode);
+ else
+ d_instantiate(dentry, inode);
out:
return rc;
}
ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata,
ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig,
ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes,
- ecryptfs_opt_err };
+ ecryptfs_opt_unlink_sigs, ecryptfs_opt_err };
static const match_table_t tokens = {
{ecryptfs_opt_sig, "sig=%s"},
{ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"},
{ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"},
{ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"},
+ {ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"},
{ecryptfs_opt_err, NULL}
};
fn_cipher_key_bytes;
fn_cipher_key_bytes_set = 1;
break;
+ case ecryptfs_opt_unlink_sigs:
+ mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS;
+ break;
case ecryptfs_opt_err:
default:
printk(KERN_WARNING
return rc;
}
-static int
-ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type,
- struct ecryptfs_msg_ctx **msg_ctx);
-
-/**
- * ecryptfs_send_raw_message
- * @msg_type: Message type
- * @daemon: Daemon struct for recipient of message
- *
- * A raw message is one that does not include an ecryptfs_message
- * struct. It simply has a type.
- *
- * Must be called with ecryptfs_daemon_hash_mux held.
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_send_raw_message(u8 msg_type,
- struct ecryptfs_daemon *daemon)
-{
- struct ecryptfs_msg_ctx *msg_ctx;
- int rc;
-
- rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx);
- if (rc) {
- printk(KERN_ERR "%s: Error whilst attempting to send "
- "message to ecryptfsd; rc = [%d]\n", __func__, rc);
- goto out;
- }
- /* Raw messages are logically context-free (e.g., no
- * reply is expected), so we set the state of the
- * ecryptfs_msg_ctx object to indicate that it should
- * be freed as soon as the message is sent. */
- mutex_lock(&msg_ctx->mux);
- msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY;
- mutex_unlock(&msg_ctx->mux);
-out:
- return rc;
-}
-
/**
* ecryptfs_spawn_daemon - Create and initialize a new daemon struct
* @daemon: Pointer to set to newly allocated daemon struct
return rc;
}
-/**
- * ecryptfs_process_helo
- * @euid: The user ID owner of the message
- * @user_ns: The namespace in which @euid applies
- * @pid: The process ID for the userspace program that sent the
- * message
- *
- * Adds the euid and pid values to the daemon euid hash. If an euid
- * already has a daemon pid registered, the daemon will be
- * unregistered before the new daemon is put into the hash list.
- * Returns zero after adding a new daemon to the hash list;
- * non-zero otherwise.
- */
-int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns,
- struct pid *pid)
-{
- struct ecryptfs_daemon *new_daemon;
- struct ecryptfs_daemon *old_daemon;
- int rc;
-
- mutex_lock(&ecryptfs_daemon_hash_mux);
- rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns);
- if (rc != 0) {
- printk(KERN_WARNING "Received request from user [%d] "
- "to register daemon [0x%p]; unregistering daemon "
- "[0x%p]\n", euid, pid, old_daemon->pid);
- rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon);
- if (rc)
- printk(KERN_WARNING "Failed to send QUIT "
- "message to daemon [0x%p]; rc = [%d]\n",
- old_daemon->pid, rc);
- hlist_del(&old_daemon->euid_chain);
- kfree(old_daemon);
- }
- rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid);
- if (rc)
- printk(KERN_ERR "%s: The gods are displeased with this attempt "
- "to create a new daemon object for euid [%d]; pid "
- "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return rc;
-}
-
/**
* ecryptfs_exorcise_daemon - Destroy the daemon struct
*
int rc = 0;
mutex_lock(&msg_ctx->mux);
- if (data) {
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
- printk(KERN_ERR "%s: Out of memory whilst attempting "
- "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
- }
- } else
- msg_ctx->msg = NULL;
+ msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
+ GFP_KERNEL);
+ if (!msg_ctx->msg) {
+ rc = -ENOMEM;
+ printk(KERN_ERR "%s: Out of memory whilst attempting "
+ "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
+ (sizeof(*msg_ctx->msg) + data_size));
+ goto out_unlock;
+ }
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
- if (data) {
- memcpy(msg_ctx->msg->data, data, data_size);
- msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- } else
- msg_ctx->msg_size = 0;
+ memcpy(msg_ctx->msg->data, data, data_size);
+ msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
daemon->num_queued_msg_ctx++;
struct ecryptfs_crypt_stat *crypt_stat;
crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode);
else
ecryptfs_printk(KERN_DEBUG, "Not a new file\n");
ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page"
"(page w/ index = [0x%.16x], to = [%d])\n", index, to);
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+ rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0,
+ to);
+ if (!rc) {
+ rc = copied;
+ fsstack_copy_inode_size(ecryptfs_inode,
+ ecryptfs_inode_to_lower(ecryptfs_inode));
+ }
+ goto out;
+ }
/* Fills in zeros if 'to' goes beyond inode size */
rc = fill_zeros_to_end_of_page(page, to);
if (rc) {
size_t size)
{
struct page *ecryptfs_page;
+ struct ecryptfs_crypt_stat *crypt_stat;
+ struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode;
char *ecryptfs_page_virt;
- loff_t ecryptfs_file_size =
- i_size_read(ecryptfs_file->f_dentry->d_inode);
+ loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode);
loff_t data_offset = 0;
loff_t pos;
int rc = 0;
+ crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
/*
* if we are writing beyond current size, then start pos
* at the current size - we'll fill in zeros from there.
flush_dcache_page(ecryptfs_page);
SetPageUptodate(ecryptfs_page);
unlock_page(ecryptfs_page);
- rc = ecryptfs_encrypt_page(ecryptfs_page);
+ if (crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+ rc = ecryptfs_encrypt_page(ecryptfs_page);
+ else
+ rc = ecryptfs_write_lower_page_segment(ecryptfs_inode,
+ ecryptfs_page,
+ start_offset_in_page,
+ data_offset);
page_cache_release(ecryptfs_page);
if (rc) {
printk(KERN_ERR "%s: Error encrypting "
pos += num_bytes;
}
if ((offset + size) > ecryptfs_file_size) {
- i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size));
- rc = ecryptfs_write_inode_size_to_metadata(
- ecryptfs_file->f_dentry->d_inode);
- if (rc) {
- printk(KERN_ERR "Problem with "
- "ecryptfs_write_inode_size_to_metadata; "
- "rc = [%d]\n", rc);
- goto out;
+ i_size_write(ecryptfs_inode, (offset + size));
+ if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) {
+ rc = ecryptfs_write_inode_size_to_metadata(
+ ecryptfs_inode);
+ if (rc) {
+ printk(KERN_ERR "Problem with "
+ "ecryptfs_write_inode_size_to_metadata; "
+ "rc = [%d]\n", rc);
+ goto out;
+ }
}
}
out:
list_for_each_entry(walker,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
- seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
+ if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK)
+ seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig);
+ else
+ seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
}
mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
seq_printf(m, ",ecryptfs_xattr_metadata");
if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
seq_printf(m, ",ecryptfs_encrypted_view");
+ if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS)
+ seq_printf(m, ",ecryptfs_unlink_sigs");
return 0;
}
static LIST_HEAD(formats);
static DEFINE_RWLOCK(binfmt_lock);
-int register_binfmt(struct linux_binfmt * fmt)
+int __register_binfmt(struct linux_binfmt * fmt, int insert)
{
if (!fmt)
return -EINVAL;
write_lock(&binfmt_lock);
- list_add(&fmt->lh, &formats);
+ insert ? list_add(&fmt->lh, &formats) :
+ list_add_tail(&fmt->lh, &formats);
write_unlock(&binfmt_lock);
return 0;
}
-EXPORT_SYMBOL(register_binfmt);
+EXPORT_SYMBOL(__register_binfmt);
void unregister_binfmt(struct linux_binfmt * fmt)
{
int check_unsafe_exec(struct linux_binprm *bprm)
{
struct task_struct *p = current, *t;
- unsigned long flags;
unsigned n_fs;
int res = 0;
n_fs = 1;
write_lock(&p->fs->lock);
- lock_task_sighand(p, &flags);
+ rcu_read_lock();
for (t = next_thread(p); t != p; t = next_thread(t)) {
if (t->fs == p->fs)
n_fs++;
}
+ rcu_read_unlock();
if (p->fs->users > n_fs) {
bprm->unsafe |= LSM_UNSAFE_SHARE;
} else {
- if (p->fs->in_exec)
- res = -EAGAIN;
- p->fs->in_exec = 1;
+ res = -EAGAIN;
+ if (!p->fs->in_exec) {
+ p->fs->in_exec = 1;
+ res = 1;
+ }
}
-
- unlock_task_sighand(p, &flags);
write_unlock(&p->fs->lock);
return res;
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite)
i_size_write(inode, off+len-towrite);
inode->i_version++;
static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
{
- ext4_fsblk_t block = ext_pblock(ext);
+ ext4_fsblk_t block = ext_pblock(ext), valid_block;
int len = ext4_ext_get_actual_len(ext);
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
- if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
- ((block + len) > ext4_blocks_count(es))))
+
+ valid_block = le32_to_cpu(es->s_first_data_block) +
+ EXT4_SB(inode->i_sb)->s_gdb_count;
+ if (unlikely(block <= valid_block ||
+ ((block + len) > ext4_blocks_count(es))))
return 0;
else
return 1;
static int ext4_valid_extent_idx(struct inode *inode,
struct ext4_extent_idx *ext_idx)
{
- ext4_fsblk_t block = idx_pblock(ext_idx);
+ ext4_fsblk_t block = idx_pblock(ext_idx), valid_block;
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
- if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
- (block >= ext4_blocks_count(es))))
+
+ valid_block = le32_to_cpu(es->s_first_data_block) +
+ EXT4_SB(inode->i_sb)->s_gdb_count;
+ if (unlikely(block <= valid_block ||
+ (block >= ext4_blocks_count(es))))
return 0;
else
return 1;
fallback:
ngroups = sbi->s_groups_count;
avefreei = freei / ngroups;
+fallback_retry:
parent_group = EXT4_I(parent)->i_block_group;
for (i = 0; i < ngroups; i++) {
grp = (parent_group + i) % ngroups;
* filesystems the above test can fail to find any blockgroups
*/
avefreei = 0;
- goto fallback;
+ goto fallback_retry;
}
return -1;
ret2 = find_group_flex(sb, dir, &group);
if (ret2 == -1) {
ret2 = find_group_other(sb, dir, &group, mode);
- if (ret2 == 0 && once)
+ if (ret2 == 0 && once) {
once = 0;
printk(KERN_NOTICE "ext4: find_group_flex "
"failed, fallback succeeded dir %lu\n",
dir->i_ino);
+ }
}
goto got_group;
}
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
- if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
- cpu_to_le32(EXT4_OS_HURD)) {
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT))
ei->i_file_acl |=
((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
- }
inode->i_size = ext4_isize(raw_inode);
ei->i_disksize = inode->i_size;
inode->i_generation = le32_to_cpu(raw_inode->i_generation);
(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
}
- if (ei->i_flags & EXT4_EXTENTS_FL) {
- /* Validate extent which is part of inode */
- ret = ext4_ext_check_inode(inode);
+ ret = 0;
+ if (ei->i_file_acl &&
+ ((ei->i_file_acl <
+ (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
+ EXT4_SB(sb)->s_gdb_count)) ||
+ (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
+ ext4_error(sb, __func__,
+ "bad extended attribute block %llu in inode #%lu",
+ ei->i_file_acl, inode->i_ino);
+ ret = -EIO;
+ goto bad_inode;
+ } else if (ei->i_flags & EXT4_EXTENTS_FL) {
+ if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ (S_ISLNK(inode->i_mode) &&
+ !ext4_inode_is_fast_symlink(inode)))
+ /* Validate extent which is part of inode */
+ ret = ext4_ext_check_inode(inode);
} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
(S_ISLNK(inode->i_mode) &&
!ext4_inode_is_fast_symlink(inode))) {
if (tmp == 0)
return BFITNOENT;
ptr--;
- bit = fls64(tmp);
- bit--; /* fls64 always adds one to the bit count */
+ bit = __ffs64(tmp);
bit /= 2; /* two bits per entry in the bitmap */
return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit;
}
u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head *dibh;
struct gfs2_alloc *al = ip->i_alloc;
struct gfs2_rgrpd *rgd = al->al_rgd;
u32 goal, blk;
u64 block;
+ int error;
if (rgrp_contains_block(rgd, ip->i_goal))
goal = ip->i_goal - rgd->rd_data0;
rgd->rd_last_alloc = blk;
block = rgd->rd_data0 + blk;
ip->i_goal = block;
-
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error == 0) {
+ struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal);
+ brelse(dibh);
+ }
gfs2_assert_withdraw(sdp, rgd->rd_free >= *n);
rgd->rd_free -= *n;
err = 0;
}
- journal_write_revoke_records(journal, commit_transaction);
+ journal_write_revoke_records(journal, commit_transaction, write_op);
/*
* If we found any dirty or locked buffers, then we should have
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/bio.h>
#endif
#include <linux/log2.h>
#ifdef __KERNEL__
static void write_one_revoke_record(journal_t *, transaction_t *,
struct journal_head **, int *,
- struct jbd_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+ struct jbd_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
#endif
/* Utility functions to maintain the revoke table */
* revoke hash, deleting the entries as we go.
*/
void journal_write_revoke_records(journal_t *journal,
- transaction_t *transaction)
+ transaction_t *transaction, int write_op)
{
struct journal_head *descriptor;
struct jbd_revoke_record_s *record;
hash_list->next;
write_one_revoke_record(journal, transaction,
&descriptor, &offset,
- record);
+ record, write_op);
count++;
list_del(&record->hash);
kmem_cache_free(revoke_record_cache, record);
}
}
if (descriptor)
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
jbd_debug(1, "Wrote %d revoke records\n", count);
}
transaction_t *transaction,
struct journal_head **descriptorp,
int *offsetp,
- struct jbd_revoke_record_s *record)
+ struct jbd_revoke_record_s *record,
+ int write_op)
{
struct journal_head *descriptor;
int offset;
/* Make sure we have a descriptor with space left for the record */
if (descriptor) {
if (offset == journal->j_blocksize) {
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
descriptor = NULL;
}
}
static void flush_descriptor(journal_t *journal,
struct journal_head *descriptor,
- int offset)
+ int offset, int write_op)
{
journal_revoke_header_t *header;
struct buffer_head *bh = jh2bh(descriptor);
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
}
#endif
if (err)
jbd2_journal_abort(journal, err);
- jbd2_journal_write_revoke_records(journal, commit_transaction);
+ jbd2_journal_write_revoke_records(journal, commit_transaction,
+ write_op);
jbd_debug(3, "JBD: commit phase 2\n");
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/bio.h>
#endif
#include <linux/log2.h>
#ifdef __KERNEL__
static void write_one_revoke_record(journal_t *, transaction_t *,
struct journal_head **, int *,
- struct jbd2_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+ struct jbd2_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
#endif
/* Utility functions to maintain the revoke table */
* revoke hash, deleting the entries as we go.
*/
void jbd2_journal_write_revoke_records(journal_t *journal,
- transaction_t *transaction)
+ transaction_t *transaction,
+ int write_op)
{
struct journal_head *descriptor;
struct jbd2_revoke_record_s *record;
hash_list->next;
write_one_revoke_record(journal, transaction,
&descriptor, &offset,
- record);
+ record, write_op);
count++;
list_del(&record->hash);
kmem_cache_free(jbd2_revoke_record_cache, record);
}
}
if (descriptor)
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
jbd_debug(1, "Wrote %d revoke records\n", count);
}
transaction_t *transaction,
struct journal_head **descriptorp,
int *offsetp,
- struct jbd2_revoke_record_s *record)
+ struct jbd2_revoke_record_s *record,
+ int write_op)
{
struct journal_head *descriptor;
int offset;
/* Make sure we have a descriptor with space left for the record */
if (descriptor) {
if (offset == journal->j_blocksize) {
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
descriptor = NULL;
}
}
static void flush_descriptor(journal_t *journal,
struct journal_head *descriptor,
- int offset)
+ int offset, int write_op)
{
jbd2_journal_revoke_header_t *header;
struct buffer_head *bh = jh2bh(descriptor);
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
}
#endif
ret = nfs_updatepage(filp, page, 0, pagelen);
out_unlock:
+ if (!ret)
+ return VM_FAULT_LOCKED;
unlock_page(page);
- if (ret)
- ret = VM_FAULT_SIGBUS;
- return ret;
+ return VM_FAULT_SIGBUS;
}
static struct vm_operations_struct nfs_file_vm_ops = {
else
mlog_errno(ret);
+ /*
+ * In case of error, manually free the allocation and do the iput().
+ * We need to do this because error here means no d_instantiate(),
+ * which means iput() will not be called during dput(dentry).
+ */
+ if (ret < 0 && !alias) {
+ ocfs2_lock_res_free(&dl->dl_lockres);
+ BUG_ON(dl->dl_count != 1);
+ spin_lock(&dentry_attach_lock);
+ dentry->d_fsdata = NULL;
+ spin_unlock(&dentry_attach_lock);
+ kfree(dl);
+ iput(inode);
+ }
+
dput(alias);
return ret;
u32 *num_dx_entries,
struct buffer_head *dirent_bh)
{
- int ret, namelen, i;
+ int ret = 0, namelen, i;
char *de_buf, *limit;
struct ocfs2_dir_entry *de;
struct buffer_head *dx_leaf_bh;
*/
BUG_ON(alloc > 2);
- ret = ocfs2_reserve_clusters(osb, alloc, &data_ac);
+ ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac);
if (ret) {
mlog_errno(ret);
goto out;
/* If the inode allocator bit is clear, this inode must be stale */
if (!set) {
- mlog(0, "inode %llu suballoc bit is clear\n", blkno);
+ mlog(0, "inode %llu suballoc bit is clear\n",
+ (unsigned long long)blkno);
status = -ESTALE;
goto unlock_nfs_sync;
}
if (status < 0) {
if (status == -ESTALE) {
mlog(0, "stale inode ino: %llu generation: %u\n",
- blkno, handle->ih_generation);
+ (unsigned long long)blkno, handle->ih_generation);
}
result = ERR_PTR(status);
goto bail;
check_gen:
if (handle->ih_generation != inode->i_generation) {
iput(inode);
- mlog(0, "stale inode ino: %llu generation: %u\n", blkno,
- handle->ih_generation);
+ mlog(0, "stale inode ino: %llu generation: %u\n",
+ (unsigned long long)blkno, handle->ih_generation);
result = ERR_PTR(-ESTALE);
goto bail;
}
}
/* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry +
- * inode alloc group descriptor + orphan dir index leaf */
-#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3)
+ * inode alloc group descriptor + orphan dir index root +
+ * orphan dir index leaf */
+#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4)
/* dinode update, old dir dinode update, new dir dinode update, old
* dir dir entry, new dir dir entry, dir entry update for renaming
struct inode *orphan_dir = NULL;
struct ocfs2_dinode *newfe = NULL;
char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
- struct buffer_head *orphan_entry_bh = NULL;
struct buffer_head *newfe_bh = NULL;
struct buffer_head *old_inode_bh = NULL;
- struct buffer_head *insert_entry_bh = NULL;
struct ocfs2_super *osb = NULL;
u64 newfe_blkno, old_de_ino;
handle_t *handle = NULL;
brelse(old_inode_bh);
brelse(old_dir_bh);
brelse(new_dir_bh);
- brelse(orphan_entry_bh);
- brelse(insert_entry_bh);
mlog_exit(status);
struct buffer_head *inode_bh = NULL;
struct ocfs2_dinode *inode_fe;
- mlog_entry("blkno: %llu\n", blkno);
+ mlog_entry("blkno: %llu\n", (unsigned long long)blkno);
/* dirty read disk */
status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh);
if (status < 0) {
- mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status);
+ mlog(ML_ERROR, "read block %llu failed %d\n",
+ (unsigned long long)blkno, status);
goto bail;
}
inode_fe = (struct ocfs2_dinode *) inode_bh->b_data;
if (!OCFS2_IS_VALID_DINODE(inode_fe)) {
- mlog(ML_ERROR, "invalid inode %llu requested\n", blkno);
+ mlog(ML_ERROR, "invalid inode %llu requested\n",
+ (unsigned long long)blkno);
status = -EINVAL;
goto bail;
}
- if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT &&
+ if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
(u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) {
mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n",
- blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
+ (unsigned long long)blkno,
+ (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
status = -EINVAL;
goto bail;
}
u64 bg_blkno;
int status;
- mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit);
+ mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno,
+ (unsigned int)bit);
alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data;
if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) {
status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno,
&group_bh);
if (status < 0) {
- mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status);
+ mlog(ML_ERROR, "read group %llu failed %d\n",
+ (unsigned long long)bg_blkno, status);
goto bail;
}
struct inode *inode_alloc_inode;
struct buffer_head *alloc_bh = NULL;
- mlog_entry("blkno: %llu", blkno);
+ mlog_entry("blkno: %llu", (unsigned long long)blkno);
status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot,
&suballoc_bit);
#include <linux/delayacct.h>
#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
+#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <asm/pgtable.h>
char state;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
+ int permitted;
struct mm_struct *mm;
unsigned long long start_time;
unsigned long cmin_flt = 0, cmaj_flt = 0;
state = *get_task_state(task);
vsize = eip = esp = 0;
+ permitted = ptrace_may_access(task, PTRACE_MODE_READ);
mm = get_task_mm(task);
if (mm) {
vsize = task_vsize(mm);
- eip = KSTK_EIP(task);
- esp = KSTK_ESP(task);
+ if (permitted) {
+ eip = KSTK_EIP(task);
+ esp = KSTK_ESP(task);
+ }
}
get_task_comm(tcomm, task);
unlock_task_sighand(task, &flags);
}
- if (!whole || num_threads < 2)
+ if (permitted && (!whole || num_threads < 2))
wchan = get_wchan(task);
if (!whole) {
min_flt = task->min_flt;
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
- mm ? mm->start_stack : 0,
+ (permitted && mm) ? mm->start_stack : 0,
esp,
eip,
/* The signal information here is obsolete.
wchan = get_wchan(task);
if (lookup_symbol_name(wchan, symname) < 0)
- return sprintf(buffer, "%lu", wchan);
+ if (!ptrace_may_access(task, PTRACE_MODE_READ))
+ return 0;
+ else
+ return sprintf(buffer, "%lu", wchan);
else
return sprintf(buffer, "%s", symname);
}
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_long_read(&vm_committed_space);
+ committed = percpu_counter_read_positive(&vm_committed_as);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
#ifndef arch_irq_stat
#define arch_irq_stat() 0
#endif
+#ifndef arch_idle_time
+#define arch_idle_time(cpu) 0
+#endif
static int show_stat(struct seq_file *p, void *v)
{
nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
system = cputime64_add(system, kstat_cpu(i).cpustat.system);
idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
+ idle = cputime64_add(idle, arch_idle_time(i));
iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
nice = kstat_cpu(i).cpustat.nice;
system = kstat_cpu(i).cpustat.system;
idle = kstat_cpu(i).cpustat.idle;
+ idle = cputime64_add(idle, arch_idle_time(i));
iowait = kstat_cpu(i).cpustat.iowait;
irq = kstat_cpu(i).cpustat.irq;
softirq = kstat_cpu(i).cpustat.softirq;
goto out_task;
ret = 0;
+
+ if (!count)
+ goto out_task;
+
mm = get_task_mm(task);
if (!mm)
goto out_task;
-#
-# Makefile for the Linux filesystems.
-#
-# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-y :=
-
obj-$(CONFIG_QUOTA) += dquot.o
obj-$(CONFIG_QFMT_V1) += quota_v1.o
obj-$(CONFIG_QFMT_V2) += quota_v2.o
void *buf, size_t buflen);
extern ssize_t romfs_dev_strnlen(struct super_block *sb,
unsigned long pos, size_t maxlen);
-extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size);
+extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size);
* compare a string to one in a romfs image on MTD
* - return 1 if matched, 0 if differ, -ve if error
*/
-static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
- u_char buf[16];
+ u_char buf[17];
size_t len, segment;
int ret;
- /* scan the string up to 16 bytes at a time */
+ /* scan the string up to 16 bytes at a time, and attempt to grab the
+ * trailing NUL whilst we're at it */
+ buf[0] = 0xff;
+
while (size > 0) {
- segment = min_t(size_t, size, 16);
+ segment = min_t(size_t, size + 1, 17);
ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf);
if (ret < 0)
return ret;
+ len--;
if (memcmp(buf, str, len) != 0)
return 0;
+ buf[0] = buf[len];
size -= len;
pos += len;
str += len;
}
+ /* check the trailing NUL was */
+ if (buf[0])
+ return 0;
+
return 1;
}
#endif /* CONFIG_ROMFS_ON_MTD */
return -EIO;
memcpy(buf, bh->b_data + offset, segment);
brelse(bh);
+ buf += segment;
buflen -= segment;
pos += segment;
}
* compare a string to one in a romfs image on a block device
* - return 1 if matched, 0 if differ, -ve if error
*/
-static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
struct buffer_head *bh;
unsigned long offset;
size_t segment;
- bool x;
+ bool matched, terminated = false;
- /* scan the string up to 16 bytes at a time */
+ /* compare string up to a block at a time */
while (size > 0) {
offset = pos & (ROMBSIZE - 1);
segment = min_t(size_t, size, ROMBSIZE - offset);
bh = sb_bread(sb, pos >> ROMBSBITS);
if (!bh)
return -EIO;
- x = (memcmp(bh->b_data + offset, str, segment) != 0);
- brelse(bh);
- if (x)
- return 0;
+ matched = (memcmp(bh->b_data + offset, str, segment) == 0);
+
size -= segment;
pos += segment;
str += segment;
+ if (matched && size == 0 && offset + segment < ROMBSIZE) {
+ if (!bh->b_data[offset + segment])
+ terminated = true;
+ else
+ matched = false;
+ }
+ brelse(bh);
+ if (!matched)
+ return 0;
+ }
+
+ if (!terminated) {
+ /* the terminating NUL must be on the first byte of the next
+ * block */
+ BUG_ON((pos & (ROMBSIZE - 1)) != 0);
+ bh = sb_bread(sb, pos >> ROMBSBITS);
+ if (!bh)
+ return -EIO;
+ matched = !bh->b_data[0];
+ brelse(bh);
+ if (!matched)
+ return 0;
}
return 1;
/*
* compare a string to one in romfs
+ * - the string to be compared to, str, may not be NUL-terminated; instead the
+ * string is of the specified size
* - return 1 if matched, 0 if differ, -ve if error
*/
-int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
size_t limit;
return -EIO;
if (size > ROMFS_MAXFN)
return -ENAMETOOLONG;
- if (size > limit - pos)
+ if (size + 1 > limit - pos)
return -EIO;
#ifdef CONFIG_ROMFS_ON_MTD
if (sb->s_mtd)
- return romfs_mtd_strncmp(sb, pos, str, size);
+ return romfs_mtd_strcmp(sb, pos, str, size);
#endif
#ifdef CONFIG_ROMFS_ON_BLOCK
if (sb->s_bdev)
- return romfs_blk_strncmp(sb, pos, str, size);
+ return romfs_blk_strcmp(sb, pos, str, size);
#endif
return -EIO;
}
goto error;
/* try to match the first 16 bytes of name */
- ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name,
- len);
+ ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name,
+ len);
if (ret < 0)
goto error;
if (ret == 1)
void *arg) /* formatter arg */
{
__int64_t bmvend; /* last block requested */
- int error; /* return value */
+ int error = 0; /* return value */
__int64_t fixlen; /* length for -1 case */
int i; /* extent number */
int lock; /* lock state */
int nexleft; /* # of user extents left */
int subnex; /* # of bmapi's can do */
int nmap; /* number of map entries */
- struct getbmapx out; /* output structure */
+ struct getbmapx *out; /* output structure */
int whichfork; /* data or attr fork */
int prealloced; /* this is a file with
* preallocated data space */
int iflags; /* interface flags */
int bmapi_flags; /* flags for xfs_bmapi */
+ int cur_ext = 0;
mp = ip->i_mount;
iflags = bmv->bmv_iflags;
-
whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
- /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not
- * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ
- * bit is set for the file, generate a read event in order
- * that the DMAPI application may do its thing before we return
- * the extents. Usually this means restoring user file data to
- * regions of the file that look like holes.
- *
- * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
- * BMV_IF_NO_DMAPI_READ so that read events are generated.
- * If this were not true, callers of ioctl( XFS_IOC_GETBMAP )
- * could misinterpret holes in a DMAPI file as true holes,
- * when in fact they may represent offline user data.
- */
- if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 &&
- DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
- whichfork == XFS_DATA_FORK) {
- error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
- if (error)
- return XFS_ERROR(error);
- }
-
if (whichfork == XFS_ATTR_FORK) {
if (XFS_IFORK_Q(ip)) {
if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS &&
ip->i_mount);
return XFS_ERROR(EFSCORRUPTED);
}
- } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
- ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
- return XFS_ERROR(EINVAL);
- if (whichfork == XFS_DATA_FORK) {
+
+ prealloced = 0;
+ fixlen = 1LL << 32;
+ } else {
+ /*
+ * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
+ * not generate a DMAPI read event. Otherwise, if the
+ * DM_EVENT_READ bit is set for the file, generate a read
+ * event in order that the DMAPI application may do its thing
+ * before we return the extents. Usually this means restoring
+ * user file data to regions of the file that look like holes.
+ *
+ * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
+ * BMV_IF_NO_DMAPI_READ so that read events are generated.
+ * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
+ * could misinterpret holes in a DMAPI file as true holes,
+ * when in fact they may represent offline user data.
+ */
+ if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
+ !(iflags & BMV_IF_NO_DMAPI_READ)) {
+ error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
+ 0, 0, 0, NULL);
+ if (error)
+ return XFS_ERROR(error);
+ }
+
+ if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
+ ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
+ ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
+ return XFS_ERROR(EINVAL);
+
if (xfs_get_extsz_hint(ip) ||
ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){
prealloced = 1;
prealloced = 0;
fixlen = ip->i_size;
}
- } else {
- prealloced = 0;
- fixlen = 1LL << 32;
}
if (bmv->bmv_length == -1) {
fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen));
- bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset),
- (__int64_t)0);
- } else if (bmv->bmv_length < 0)
- return XFS_ERROR(EINVAL);
- if (bmv->bmv_length == 0) {
+ bmv->bmv_length =
+ max_t(__int64_t, fixlen - bmv->bmv_offset, 0);
+ } else if (bmv->bmv_length == 0) {
bmv->bmv_entries = 0;
return 0;
+ } else if (bmv->bmv_length < 0) {
+ return XFS_ERROR(EINVAL);
}
+
nex = bmv->bmv_count - 1;
if (nex <= 0)
return XFS_ERROR(EINVAL);
bmvend = bmv->bmv_offset + bmv->bmv_length;
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- if (((iflags & BMV_IF_DELALLOC) == 0) &&
- (whichfork == XFS_DATA_FORK) &&
- (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) {
- /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */
- error = xfs_flush_pages(ip, (xfs_off_t)0,
- -1, 0, FI_REMAPF);
- if (error) {
- xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- return error;
+ if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx))
+ return XFS_ERROR(ENOMEM);
+ out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL);
+ if (!out)
+ return XFS_ERROR(ENOMEM);
+
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) {
+ if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) {
+ error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF);
+ if (error)
+ goto out_unlock_iolock;
}
- }
- ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) ||
- ip->i_delayed_blks == 0);
+ ASSERT(ip->i_delayed_blks == 0);
+ }
lock = xfs_ilock_map_shared(ip);
if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
- bmapi_flags = xfs_bmapi_aflag(whichfork) |
- ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
+ bmapi_flags = xfs_bmapi_aflag(whichfork);
+ if (!(iflags & BMV_IF_PREALLOC))
+ bmapi_flags |= XFS_BMAPI_IGSTATE;
/*
* Allocate enough space to handle "subnex" maps at a time.
*/
+ error = ENOMEM;
subnex = 16;
- map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP);
+ map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+ if (!map)
+ goto out_unlock_ilock;
bmv->bmv_entries = 0;
- if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) {
- if (((iflags & BMV_IF_DELALLOC) == 0) ||
- whichfork == XFS_ATTR_FORK) {
- error = 0;
- goto unlock_and_return;
- }
+ if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 &&
+ (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) {
+ error = 0;
+ goto out_free_map;
}
nexleft = nex;
bmapi_flags, NULL, 0, map, &nmap,
NULL, NULL);
if (error)
- goto unlock_and_return;
+ goto out_free_map;
ASSERT(nmap <= subnex);
for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
- out.bmv_oflags = 0;
+ out[cur_ext].bmv_oflags = 0;
if (map[i].br_state == XFS_EXT_UNWRITTEN)
- out.bmv_oflags |= BMV_OF_PREALLOC;
+ out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC;
else if (map[i].br_startblock == DELAYSTARTBLOCK)
- out.bmv_oflags |= BMV_OF_DELALLOC;
- out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff);
- out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
- out.bmv_unused1 = out.bmv_unused2 = 0;
+ out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC;
+ out[cur_ext].bmv_offset =
+ XFS_FSB_TO_BB(mp, map[i].br_startoff);
+ out[cur_ext].bmv_length =
+ XFS_FSB_TO_BB(mp, map[i].br_blockcount);
+ out[cur_ext].bmv_unused1 = 0;
+ out[cur_ext].bmv_unused2 = 0;
ASSERT(((iflags & BMV_IF_DELALLOC) != 0) ||
(map[i].br_startblock != DELAYSTARTBLOCK));
if (map[i].br_startblock == HOLESTARTBLOCK &&
whichfork == XFS_ATTR_FORK) {
/* came to the end of attribute fork */
- out.bmv_oflags |= BMV_OF_LAST;
- goto unlock_and_return;
- } else {
- int full = 0; /* user array is full */
-
- if (!xfs_getbmapx_fix_eof_hole(ip, &out,
- prealloced, bmvend,
- map[i].br_startblock)) {
- goto unlock_and_return;
- }
-
- /* format results & advance arg */
- error = formatter(&arg, &out, &full);
- if (error || full)
- goto unlock_and_return;
- nexleft--;
- bmv->bmv_offset =
- out.bmv_offset + out.bmv_length;
- bmv->bmv_length = MAX((__int64_t)0,
- (__int64_t)(bmvend - bmv->bmv_offset));
- bmv->bmv_entries++;
+ out[cur_ext].bmv_oflags |= BMV_OF_LAST;
+ goto out_free_map;
}
+
+ if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext],
+ prealloced, bmvend,
+ map[i].br_startblock))
+ goto out_free_map;
+
+ nexleft--;
+ bmv->bmv_offset =
+ out[cur_ext].bmv_offset +
+ out[cur_ext].bmv_length;
+ bmv->bmv_length =
+ max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
+ bmv->bmv_entries++;
+ cur_ext++;
}
} while (nmap && nexleft && bmv->bmv_length);
-unlock_and_return:
+ out_free_map:
+ kmem_free(map);
+ out_unlock_ilock:
xfs_iunlock_map_shared(ip, lock);
+ out_unlock_iolock:
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- kmem_free(map);
+ for (i = 0; i < cur_ext; i++) {
+ int full = 0; /* user array is full */
+
+ /* format results & advance arg */
+ error = formatter(&arg, &out[i], &full);
+ if (error || full)
+ break;
+ }
return error;
}
* necessary.
*/
if (ip->i_df.if_flags & XFS_IFEXTENTS) {
+ xfs_ilock(ip, XFS_ILOCK_SHARED);
error = xfs_bmap_last_offset(NULL, ip, &last_block,
XFS_DATA_FORK);
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (error) {
last_block = 0;
}
sbp->sb_sectsize > XFS_MAX_SECTORSIZE ||
sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG ||
sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG ||
+ sbp->sb_sectsize != (1 << sbp->sb_sectlog) ||
sbp->sb_blocksize < XFS_MIN_BLOCKSIZE ||
sbp->sb_blocksize > XFS_MAX_BLOCKSIZE ||
sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG ||
sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG ||
+ sbp->sb_blocksize != (1 << sbp->sb_blocklog) ||
sbp->sb_inodesize < XFS_DINODE_MIN_SIZE ||
sbp->sb_inodesize > XFS_DINODE_MAX_SIZE ||
sbp->sb_inodelog < XFS_DINODE_MIN_LOG ||
sbp->sb_inodelog > XFS_DINODE_MAX_LOG ||
+ sbp->sb_inodesize != (1 << sbp->sb_inodelog) ||
(sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) ||
(sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) ||
(sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) ||
struct acpi_processor_cx *state;
unsigned long bm_check_timestamp;
u32 default_state;
- u32 bm_activity;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
int timer_broadcast_on_state;
#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
extern int acpi_video_register(void);
+extern int acpi_video_exit(void);
#else
static inline int acpi_video_register(void) { return 0; }
+static inline void acpi_video_exit(void) { return; }
#endif
#endif
#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
#define atomic_long_cmpxchg(l, old, new) \
- (atomic_cmpxchg((atomic64_t *)(l), (old), (new)))
+ (atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
#define atomic_long_xchg(v, new) \
- (atomic_xchg((atomic64_t *)(l), (new)))
+ (atomic64_xchg((atomic64_t *)(l), (new)))
#else /* BITS_PER_LONG == 64 */
+#include <linux/section-names.h>
+
#ifndef LOAD_OFFSET
#define LOAD_OFFSET 0
#endif
#define BRANCH_PROFILE()
#endif
-#ifdef CONFIG_EVENT_TRACER
+#ifdef CONFIG_EVENT_TRACING
#define FTRACE_EVENTS() VMLINUX_SYMBOL(__start_ftrace_events) = .; \
*(_ftrace_events) \
VMLINUX_SYMBOL(__stop_ftrace_events) = .;
/* .data section */
#define DATA_DATA \
*(.data) \
- *(.data.init.refok) \
*(.ref.data) \
DEV_KEEP(init.data) \
DEV_KEEP(exit.data) \
*(.text.hot) \
*(.text) \
*(.ref.text) \
- *(.text.init.refok) \
- *(.exit.text.refok) \
DEV_KEEP(init.text) \
DEV_KEEP(exit.text) \
CPU_KEEP(init.text) \
#endif
/* Section used for early init (in .S files) */
-#define HEAD_TEXT *(.head.text)
+#define HEAD_TEXT *(HEAD_TEXT_SECTION)
/* init and exit section handling */
#define INIT_DATA \
{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
void acpi_irq_stats_init(void);
extern u32 acpi_irq_handled;
+extern u32 acpi_irq_not_handled;
extern struct acpi_mcfg_allocation *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
int hasvdso;
};
-extern int register_binfmt(struct linux_binfmt *);
+extern int __register_binfmt(struct linux_binfmt *fmt, int insert);
+
+/* Registration of default binfmt handlers */
+static inline int register_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 0);
+}
+/* Same as above, but adds a new binfmt at the top of the list */
+static inline int insert_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 1);
+}
+
extern void unregister_binfmt(struct linux_binfmt *);
extern int prepare_binprm(struct linux_binprm *);
* top 4 bits of bio flags indicate the pool this bio came from
*/
#define BIO_POOL_BITS (4)
+#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
return fls64(l);
}
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+ if (((u32)word) == 0UL)
+ return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+ return __ffs((unsigned long)word);
+}
+
#ifdef __KERNEL__
#ifdef CONFIG_GENERIC_FIND_FIRST_BIT
__REQ_COPY_USER, /* contains copies of user pages */
__REQ_INTEGRITY, /* integrity metadata has been remapped */
__REQ_NOIDLE, /* Don't anticipate more IO after this one */
+ __REQ_IO_STAT, /* account I/O stat */
__REQ_NR_BITS, /* stops here */
};
#define REQ_COPY_USER (1 << __REQ_COPY_USER)
#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
#define REQ_NOIDLE (1 << __REQ_NOIDLE)
+#define REQ_IO_STAT (1 << __REQ_IO_STAT)
#define BLK_MAX_CDB 16
blk_failfast_transport(rq) || \
blk_failfast_driver(rq))
#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
+#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT)
+#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET)
#define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq)))
* The remap event
*/
struct blk_io_trace_remap {
- __be32 device;
__be32 device_from;
- __be64 sector;
+ __be32 device_to;
+ __be64 sector_from;
};
enum {
extern int blk_trace_ioctl(struct block_device *, unsigned, char __user *);
extern void blk_trace_shutdown(struct request_queue *);
-extern int do_blk_trace_setup(struct request_queue *q,
- char *name, dev_t dev, struct blk_user_trace_setup *buts);
+extern int do_blk_trace_setup(struct request_queue *q, char *name,
+ dev_t dev, struct block_device *bdev,
+ struct blk_user_trace_setup *buts);
extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
/**
extern void blk_add_driver_data(struct request_queue *q, struct request *rq,
void *data, size_t len);
extern int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+ struct block_device *bdev,
char __user *arg);
extern int blk_trace_startstop(struct request_queue *q, int start);
extern int blk_trace_remove(struct request_queue *q);
+extern int blk_trace_init_sysfs(struct device *dev);
extern struct attribute_group blk_trace_attr_group;
#else /* !CONFIG_BLK_DEV_IO_TRACE */
-#define blk_trace_ioctl(bdev, cmd, arg) (-ENOTTY)
-#define blk_trace_shutdown(q) do { } while (0)
-#define do_blk_trace_setup(q, name, dev, buts) (-ENOTTY)
-#define blk_add_driver_data(q, rq, data, len) do {} while (0)
-#define blk_trace_setup(q, name, dev, arg) (-ENOTTY)
-#define blk_trace_startstop(q, start) (-ENOTTY)
-#define blk_trace_remove(q) (-ENOTTY)
-#define blk_add_trace_msg(q, fmt, ...) do { } while (0)
+# define blk_trace_ioctl(bdev, cmd, arg) (-ENOTTY)
+# define blk_trace_shutdown(q) do { } while (0)
+# define do_blk_trace_setup(q, name, dev, bdev, buts) (-ENOTTY)
+# define blk_add_driver_data(q, rq, data, len) do {} while (0)
+# define blk_trace_setup(q, name, dev, bdev, arg) (-ENOTTY)
+# define blk_trace_startstop(q, start) (-ENOTTY)
+# define blk_trace_remove(q) (-ENOTTY)
+# define blk_add_trace_msg(q, fmt, ...) do { } while (0)
+static inline int blk_trace_init_sysfs(struct device *dev)
+{
+ return 0;
+}
#endif /* CONFIG_BLK_DEV_IO_TRACE */
+
#endif /* __KERNEL__ */
#endif
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
+
+ /* Legacy hooks, used by mpc52xx_psc_spi driver. */
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
};
struct mpc8xx_pcmcia_ops {
extern int skip_trace(unsigned long ip);
-extern void ftrace_release(void *start, unsigned long size);
-
extern void ftrace_disable_daemon(void);
extern void ftrace_enable_daemon(void);
#else
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
extern void ftrace_init(void);
-extern void ftrace_init_module(struct module *mod,
- unsigned long *start, unsigned long *end);
#else
static inline void ftrace_init(void) { }
-static inline void
-ftrace_init_module(struct module *mod,
- unsigned long *start, unsigned long *end) { }
#endif
/*
unsigned long ret;
unsigned long func;
unsigned long long calltime;
+ unsigned long long subtime;
};
/*
extern int
ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth);
-extern void
-ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret);
/*
* Sometimes we don't want to trace a function with the function
extern int ftrace_dump_on_oops;
+#ifdef CONFIG_PREEMPT
+#define INIT_TRACE_RECURSION .trace_recursion = 0,
+#endif
+
#endif /* CONFIG_TRACING */
+#ifndef INIT_TRACE_RECURSION
+#define INIT_TRACE_RECURSION
+#endif
#ifdef CONFIG_HW_BRANCH_TRACER
--- /dev/null
+#ifndef _LINUX_FTRACE_EVENT_H
+#define _LINUX_FTRACE_EVENT_H
+
+#include <linux/trace_seq.h>
+#include <linux/ring_buffer.h>
+
+
+struct trace_array;
+struct tracer;
+struct dentry;
+
+/*
+ * The trace entry - the most basic unit of tracing. This is what
+ * is printed in the end as a single line in the trace output, such as:
+ *
+ * bash-15816 [01] 235.197585: idle_cpu <- irq_enter
+ */
+struct trace_entry {
+ unsigned short type;
+ unsigned char flags;
+ unsigned char preempt_count;
+ int pid;
+ int tgid;
+};
+
+#define FTRACE_MAX_EVENT \
+ ((1 << (sizeof(((struct trace_entry *)0)->type) * 8)) - 1)
+
+/*
+ * Trace iterator - used by printout routines who present trace
+ * results to users and which routines might sleep, etc:
+ */
+struct trace_iterator {
+ struct trace_array *tr;
+ struct tracer *trace;
+ void *private;
+ int cpu_file;
+ struct mutex mutex;
+ struct ring_buffer_iter *buffer_iter[NR_CPUS];
+
+ /* The below is zeroed out in pipe_read */
+ struct trace_seq seq;
+ struct trace_entry *ent;
+ int cpu;
+ u64 ts;
+
+ unsigned long iter_flags;
+ loff_t pos;
+ long idx;
+
+ cpumask_var_t started;
+};
+
+
+typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
+ int flags);
+struct trace_event {
+ struct hlist_node node;
+ struct list_head list;
+ int type;
+ trace_print_func trace;
+ trace_print_func raw;
+ trace_print_func hex;
+ trace_print_func binary;
+};
+
+extern int register_ftrace_event(struct trace_event *event);
+extern int unregister_ftrace_event(struct trace_event *event);
+
+/* Return values for print_line callback */
+enum print_line_t {
+ TRACE_TYPE_PARTIAL_LINE = 0, /* Retry after flushing the seq */
+ TRACE_TYPE_HANDLED = 1,
+ TRACE_TYPE_UNHANDLED = 2, /* Relay to other output functions */
+ TRACE_TYPE_NO_CONSUME = 3 /* Handled but ask to not consume */
+};
+
+
+struct ring_buffer_event *
+trace_current_buffer_lock_reserve(int type, unsigned long len,
+ unsigned long flags, int pc);
+void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
+ unsigned long flags, int pc);
+void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
+ unsigned long flags, int pc);
+void trace_current_buffer_discard_commit(struct ring_buffer_event *event);
+
+void tracing_record_cmdline(struct task_struct *tsk);
+
+struct ftrace_event_call {
+ struct list_head list;
+ char *name;
+ char *system;
+ struct dentry *dir;
+ struct trace_event *event;
+ int enabled;
+ int (*regfunc)(void);
+ void (*unregfunc)(void);
+ int id;
+ int (*raw_init)(void);
+ int (*show_format)(struct trace_seq *s);
+ int (*define_fields)(void);
+ struct list_head fields;
+ int filter_active;
+ void *filter;
+ void *mod;
+
+#ifdef CONFIG_EVENT_PROFILE
+ atomic_t profile_count;
+ int (*profile_enable)(struct ftrace_event_call *);
+ void (*profile_disable)(struct ftrace_event_call *);
+#endif
+};
+
+#define MAX_FILTER_PRED 32
+#define MAX_FILTER_STR_VAL 128
+
+extern int init_preds(struct ftrace_event_call *call);
+extern void destroy_preds(struct ftrace_event_call *call);
+extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
+extern int filter_current_check_discard(struct ftrace_event_call *call,
+ void *rec,
+ struct ring_buffer_event *event);
+
+extern int trace_define_field(struct ftrace_event_call *call, char *type,
+ char *name, int offset, int size, int is_signed);
+
+#define is_signed_type(type) (((type)(-1)) < 0)
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement optimizing out.
+ */
+#define event_trace_printk(ip, fmt, args...) \
+do { \
+ __trace_printk_check_format(fmt, ##args); \
+ tracing_record_cmdline(current); \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __trace_bprintk(ip, trace_printk_fmt, ##args); \
+ } else \
+ __trace_printk(ip, fmt, ##args); \
+} while (0)
+
+#define __common_field(type, item, is_signed) \
+ ret = trace_define_field(event_call, #type, "common_" #item, \
+ offsetof(typeof(field.ent), item), \
+ sizeof(field.ent.item), is_signed); \
+ if (ret) \
+ return ret;
+
+#endif /* _LINUX_FTRACE_EVENT_H */
#define DISK_PITER_REVERSE (1 << 0) /* iterate in the reverse direction */
#define DISK_PITER_INCL_EMPTY (1 << 1) /* include 0-sized parts */
#define DISK_PITER_INCL_PART0 (1 << 2) /* include partition 0 */
+#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
struct disk_part_iter {
struct gendisk *disk;
#define _LINUX_INIT_H
#include <linux/compiler.h>
+#include <linux/section-names.h>
+#include <linux/stringify.h>
/* These macros are used to mark some functions or
* initialized data (doesn't apply to uninitialized data)
#define __refdata __section(.ref.data)
#define __refconst __section(.ref.rodata)
-/* backward compatibility note
- * A few places hardcode the old section names:
- * .text.init.refok
- * .data.init.refok
- * .exit.text.refok
- * They should be converted to use the defines from this file
- */
-
/* compatibility defines */
#define __init_refok __ref
#define __initdata_refok __refdata
#define __memexitconst __section(.memexit.rodata)
/* For assembly routines */
-#define __HEAD .section ".head.text","ax"
+#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax"
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
INIT_TRACE_IRQFLAGS \
INIT_LOCKDEP \
INIT_FTRACE_GRAPH \
+ INIT_TRACE_RECURSION \
}
#define SYN_REPORT 0
#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
/*
* Keys and buttons
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
+
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
#define BUS_GSC 0x1A
#define BUS_ATARI 0x1B
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+
/*
* Values describing the status of a force-feedback effect
*/
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
+static inline void input_mt_sync(struct input_dev *dev)
+{
+ input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
extern int journal_revoke (handle_t *,
unsigned long, struct buffer_head *);
extern int journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void journal_write_revoke_records(journal_t *, transaction_t *);
+extern void journal_write_revoke_records(journal_t *,
+ transaction_t *, int);
/* Recovery revoke support */
extern int journal_set_revoke(journal_t *, unsigned long, tid_t);
extern void jbd2_journal_destroy_revoke(journal_t *);
extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void jbd2_journal_write_revoke_records(journal_t *, transaction_t *);
+extern void jbd2_journal_write_revoke_records(journal_t *,
+ transaction_t *, int);
/* Recovery revoke support */
extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
--- /dev/null
+/*
+ * Copyright (C) 2008 Eduard - Gabriel Munteanu
+ *
+ * This file is released under GPL version 2.
+ */
+
+#ifndef _LINUX_KMEMTRACE_H
+#define _LINUX_KMEMTRACE_H
+
+#ifdef __KERNEL__
+
+#include <trace/events/kmem.h>
+
+#ifdef CONFIG_KMEMTRACE
+extern void kmemtrace_init(void);
+#else
+static inline void kmemtrace_init(void)
+{
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_KMEMTRACE_H */
+
#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
#define KVM_CAP_DEVICE_DEASSIGNMENT 27
#endif
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
#ifdef KVM_CAP_IRQ_ROUTING
enum lru_list from, enum lru_list to);
extern void mem_cgroup_uncharge_page(struct page *page);
extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern int mem_cgroup_shrink_usage(struct page *page,
+extern int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
{
}
-static inline int mem_cgroup_shrink_usage(struct page *page,
+static inline int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
#ifdef __KERNEL__
#include <linux/mm.h>
+#include <linux/percpu_counter.h>
#include <asm/atomic.h>
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_long_t vm_committed_space;
+extern struct percpu_counter vm_committed_as;
-#ifdef CONFIG_SMP
-extern void vm_acct_memory(long pages);
-#else
static inline void vm_acct_memory(long pages)
{
- atomic_long_add(pages, &vm_committed_space);
+ percpu_counter_add(&vm_committed_as, pages);
}
-#endif
static inline void vm_unacct_memory(long pages)
{
extern int register_kmmio_probe(struct kmmio_probe *p);
extern void unregister_kmmio_probe(struct kmmio_probe *p);
+extern int kmmio_init(void);
+extern void kmmio_cleanup(void);
#ifdef CONFIG_MMIOTRACE
/* kmmio is active by some kmmio_probes? */
const char **trace_bprintk_fmt_start;
unsigned int num_trace_bprintk_fmt;
#endif
+#ifdef CONFIG_EVENT_TRACING
+ struct ftrace_event_call *trace_events;
+ unsigned int num_trace_events;
+#endif
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+ unsigned long *ftrace_callsites;
+ unsigned int num_ftrace_callsites;
+#endif
#ifdef CONFIG_MODULE_UNLOAD
/* What modules depend on me? */
# else
# define LL_MAX_HEADER 96
# endif
-#elif defined(CONFIG_TR)
+#elif defined(CONFIG_TR) || defined(CONFIG_TR_MODULE)
# define LL_MAX_HEADER 48
#else
# define LL_MAX_HEADER 32
*
* int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
* This function is called when the Media Access Control address
- * needs to be changed. If not this interface is not defined, the
+ * needs to be changed. If this interface is not defined, the
* mac address can not be changed.
*
* int (*ndo_validate_addr)(struct net_device *dev);
enum ctattr_protoinfo_dccp {
CTA_PROTOINFO_DCCP_UNSPEC,
CTA_PROTOINFO_DCCP_STATE,
+ CTA_PROTOINFO_DCCP_ROLE,
__CTA_PROTOINFO_DCCP_MAX,
};
#define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
/* What hooks you will enter on */
unsigned int valid_hooks;
- /* Lock for the curtain */
- struct mutex lock;
-
/* Man behind the curtain... */
struct xt_table_info *private;
extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
extern void xt_free_table_info(struct xt_table_info *info);
-extern void xt_table_entry_swap_rcu(struct xt_table_info *old,
- struct xt_table_info *new);
+
+/*
+ * Per-CPU spinlock associated with per-cpu table entries, and
+ * with a counter for the "reading" side that allows a recursive
+ * reader to avoid taking the lock and deadlocking.
+ *
+ * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu.
+ * It needs to ensure that the rules are not being changed while the packet
+ * is being processed. In some cases, the read lock will be acquired
+ * twice on the same CPU; this is okay because of the count.
+ *
+ * "writing" is used when reading counters.
+ * During replace any readers that are using the old tables have to complete
+ * before freeing the old table. This is handled by the write locking
+ * necessary for reading the counters.
+ */
+struct xt_info_lock {
+ spinlock_t lock;
+ unsigned char readers;
+};
+DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
+
+/*
+ * Note: we need to ensure that preemption is disabled before acquiring
+ * the per-cpu-variable, so we do it as a two step process rather than
+ * using "spin_lock_bh()".
+ *
+ * We _also_ need to disable bottom half processing before updating our
+ * nesting count, to make sure that the only kind of re-entrancy is this
+ * code being called by itself: since the count+lock is not an atomic
+ * operation, we can allow no races.
+ *
+ * _Only_ that special combination of being per-cpu and never getting
+ * re-entered asynchronously means that the count is safe.
+ */
+static inline void xt_info_rdlock_bh(void)
+{
+ struct xt_info_lock *lock;
+
+ local_bh_disable();
+ lock = &__get_cpu_var(xt_info_locks);
+ if (likely(!lock->readers++))
+ spin_lock(&lock->lock);
+}
+
+static inline void xt_info_rdunlock_bh(void)
+{
+ struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
+
+ if (likely(!--lock->readers))
+ spin_unlock(&lock->lock);
+ local_bh_enable();
+}
+
+/*
+ * The "writer" side needs to get exclusive access to the lock,
+ * regardless of readers. This must be called with bottom half
+ * processing (and thus also preemption) disabled.
+ */
+static inline void xt_info_wrlock(unsigned int cpu)
+{
+ spin_lock(&per_cpu(xt_info_locks, cpu).lock);
+}
+
+static inline void xt_info_wrunlock(unsigned int cpu)
+{
+ spin_unlock(&per_cpu(xt_info_locks, cpu).lock);
+}
/*
* This helper is performance critical and must be inlined
struct bus_type *bus);
extern void of_unregister_driver(struct of_platform_driver *drv);
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+ return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+ of_unregister_driver(drv);
+}
+
#include <asm/of_platform.h>
extern struct of_device *of_find_device_by_node(struct device_node *np);
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
+#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
#include <linux/cdrom.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/mempool.h>
/* default bio write queue congestion marks */
#define PKT_WRITE_CONGESTION_ON 10000
* @set_current_limit: Configure a limit for a current-limited regulator.
* @get_current_limit: Get the configured limit for a current-limited regulator.
*
+ * @set_mode: Set the configured operating mode for the regulator.
* @get_mode: Get the configured operating mode for the regulator.
* @get_status: Return actual (not as-configured) status of regulator, as a
* REGULATOR_STATUS value (or negative errno)
* Don't refer to this struct directly, use functions below.
*/
struct ring_buffer_event {
- u32 type:2, len:3, time_delta:27;
+ u32 type_len:5, time_delta:27;
u32 array[];
};
* size is variable depending on how much
* padding is needed
* If time_delta is non zero:
- * everything else same as RINGBUF_TYPE_DATA
+ * array[0] holds the actual length
+ * size = 4 + length (bytes)
*
* @RINGBUF_TYPE_TIME_EXTEND: Extend the time delta
* array[0] = time delta (28 .. 59)
* array[1..2] = tv_sec
* size = 16 bytes
*
- * @RINGBUF_TYPE_DATA: Data record
- * If len is zero:
+ * <= @RINGBUF_TYPE_DATA_TYPE_LEN_MAX:
+ * Data record
+ * If type_len is zero:
* array[0] holds the actual length
* array[1..(length+3)/4] holds data
- * size = 4 + 4 + length (bytes)
+ * size = 4 + length (bytes)
* else
- * length = len << 2
+ * length = type_len << 2
* array[0..(length+3)/4-1] holds data
* size = 4 + length (bytes)
*/
enum ring_buffer_type {
+ RINGBUF_TYPE_DATA_TYPE_LEN_MAX = 28,
RINGBUF_TYPE_PADDING,
RINGBUF_TYPE_TIME_EXTEND,
/* FIXME: RINGBUF_TYPE_TIME_STAMP not implemented */
RINGBUF_TYPE_TIME_STAMP,
- RINGBUF_TYPE_DATA,
};
unsigned ring_buffer_event_length(struct ring_buffer_event *event);
return event->time_delta;
}
+/*
+ * ring_buffer_event_discard can discard any event in the ring buffer.
+ * it is up to the caller to protect against a reader from
+ * consuming it or a writer from wrapping and replacing it.
+ *
+ * No external protection is needed if this is called before
+ * the event is commited. But in that case it would be better to
+ * use ring_buffer_discard_commit.
+ *
+ * Note, if an event that has not been committed is discarded
+ * with ring_buffer_event_discard, it must still be committed.
+ */
void ring_buffer_event_discard(struct ring_buffer_event *event);
+/*
+ * ring_buffer_discard_commit will remove an event that has not
+ * ben committed yet. If this is used, then ring_buffer_unlock_commit
+ * must not be called on the discarded event. This function
+ * will try to remove the event from the ring buffer completely
+ * if another event has not been written after it.
+ *
+ * Example use:
+ *
+ * if (some_condition)
+ * ring_buffer_discard_commit(buffer, event);
+ * else
+ * ring_buffer_unlock_commit(buffer, event);
+ */
+void ring_buffer_discard_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event);
+
/*
* size is in bytes for each per CPU buffer.
*/
unsigned long ring_buffer_overruns(struct ring_buffer *buffer);
unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu);
unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_nmi_dropped_cpu(struct ring_buffer *buffer, int cpu);
u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu);
void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
int ring_buffer_read_page(struct ring_buffer *buffer, void **data_page,
size_t len, int cpu, int full);
+struct trace_seq;
+
+int ring_buffer_print_entry_header(struct trace_seq *s);
+int ring_buffer_print_page_header(struct trace_seq *s);
+
enum ring_buffer_flags {
RB_FL_OVERWRITE = 1 << 0,
};
#ifdef CONFIG_TRACING
/* state flags for use by tracers */
unsigned long trace;
-#endif
+ /* bitmask of trace recursion */
+ unsigned long trace_recursion;
+#endif /* CONFIG_TRACING */
};
/* Future-safe accessor for struct task_struct's cpus_allowed. */
--- /dev/null
+#ifndef __LINUX_SECTION_NAMES_H
+#define __LINUX_SECTION_NAMES_H
+
+#define HEAD_TEXT_SECTION .head.text
+
+#endif /* !__LINUX_SECTION_NAMES_H */
#include <asm/page.h> /* kmalloc_sizes.h needs PAGE_SIZE */
#include <asm/cache.h> /* kmalloc_sizes.h needs L1_CACHE_BYTES */
#include <linux/compiler.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
/* Size description struct for general caches. */
struct cache_sizes {
#include <linux/gfp.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
enum stat_item {
ALLOC_FASTPATH, /* Allocation from cpu slab */
#define XPRT_BINDING (5)
#define XPRT_CLOSING (6)
#define XPRT_CONNECTION_ABORT (7)
+#define XPRT_CONNECTION_CLOSE (8)
static inline void xprt_set_connected(struct rpc_xprt *xprt)
{
--- /dev/null
+#ifndef _LINUX_TRACE_SEQ_H
+#define _LINUX_TRACE_SEQ_H
+
+#include <linux/fs.h>
+
+/*
+ * Trace sequences are used to allow a function to call several other functions
+ * to create a string of data to use (up to a max of PAGE_SIZE.
+ */
+
+struct trace_seq {
+ unsigned char buffer[PAGE_SIZE];
+ unsigned int len;
+ unsigned int readpos;
+};
+
+static inline void
+trace_seq_init(struct trace_seq *s)
+{
+ s->len = 0;
+ s->readpos = 0;
+}
+
+/*
+ * Currently only defined when tracing is enabled.
+ */
+#ifdef CONFIG_TRACING
+extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+extern int
+trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
+extern void trace_print_seq(struct seq_file *m, struct trace_seq *s);
+extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
+ size_t cnt);
+extern int trace_seq_puts(struct trace_seq *s, const char *str);
+extern int trace_seq_putc(struct trace_seq *s, unsigned char c);
+extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len);
+extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
+ size_t len);
+extern void *trace_seq_reserve(struct trace_seq *s, size_t len);
+extern int trace_seq_path(struct trace_seq *s, struct path *path);
+
+#else /* CONFIG_TRACING */
+static inline int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
+{
+ return 0;
+}
+static inline int
+trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
+{
+ return 0;
+}
+
+static inline void trace_print_seq(struct seq_file *m, struct trace_seq *s)
+{
+}
+static inline ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
+ size_t cnt)
+{
+ return 0;
+}
+static inline int trace_seq_puts(struct trace_seq *s, const char *str)
+{
+ return 0;
+}
+static inline int trace_seq_putc(struct trace_seq *s, unsigned char c)
+{
+ return 0;
+}
+static inline int
+trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len)
+{
+ return 0;
+}
+static inline int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
+ size_t len)
+{
+ return 0;
+}
+static inline void *trace_seq_reserve(struct trace_seq *s, size_t len)
+{
+ return NULL;
+}
+static inline int trace_seq_path(struct trace_seq *s, struct path *path)
+{
+ return 0;
+}
+#endif /* CONFIG_TRACING */
+
+#endif /* _LINUX_TRACE_SEQ_H */
* Keep in sync with vmlinux.lds.h.
*/
+#ifndef DECLARE_TRACE
+
#define TP_PROTO(args...) args
#define TP_ARGS(args...) args
struct tracepoint *end)
{ }
#endif /* CONFIG_TRACEPOINTS */
+#endif /* DECLARE_TRACE */
/*
* Connect a probe to a tracepoint.
}
#define PARAMS(args...) args
-#define TRACE_FORMAT(name, proto, args, fmt) \
- DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-
+#ifndef TRACE_EVENT
/*
* For use with the TRACE_EVENT macro:
*
#define TRACE_EVENT(name, proto, args, struct, assign, print) \
DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#endif
#endif
#define USB_CDC_SUBCLASS_DMM 0x09
#define USB_CDC_SUBCLASS_MDLM 0x0a
#define USB_CDC_SUBCLASS_OBEX 0x0b
+#define USB_CDC_SUBCLASS_EEM 0x0c
#define USB_CDC_PROTO_NONE 0
#define USB_CDC_ACM_PROTO_AT_CDMA 6
#define USB_CDC_ACM_PROTO_VENDOR 0xff
+#define USB_CDC_PROTO_EEM 7
+
/*-------------------------------------------------------------------------*/
/*
* key configuration differences between boards.
*/
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
/* The USB role is defined by the connector used on the board, so long as
* standards are being followed. (Developer boards sometimes won't.)
*/
extern int tusb6010_platform_retime(unsigned is_refclk);
#endif /* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
* compatible drivers/servers. */
#include <linux/types.h>
#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
/* The ID for virtio_net */
#define VIRTIO_ID_NET 1
int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
-#define DEFINE_WAIT(name) \
+#define DEFINE_WAIT_FUNC(name, function) \
wait_queue_t name = { \
.private = current, \
- .func = autoremove_wake_function, \
+ .func = function, \
.task_list = LIST_HEAD_INIT((name).task_list), \
}
+#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function)
+
#define DEFINE_WAIT_BIT(name, word, bit) \
struct wait_bit_queue name = { \
.key = __WAIT_BIT_KEY_INITIALIZER(word, bit), \
struct p9_req_t {
int status;
int t_err;
- u16 flush_tag;
wait_queue_head_t *wq;
struct p9_fcall *tc;
struct p9_fcall *rc;
/* HCI timeouts */
#define HCI_CONNECT_TIMEOUT (40000) /* 40 seconds */
#define HCI_DISCONN_TIMEOUT (2000) /* 2 seconds */
+#define HCI_PAIRING_TIMEOUT (60000) /* 60 seconds */
#define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */
#define HCI_INIT_TIMEOUT (10000) /* 10 seconds */
__u8 auth_type;
__u8 sec_level;
__u8 power_save;
+ __u16 disc_timeout;
unsigned long pend;
unsigned int sent;
struct timer_list disc_timer;
struct timer_list idle_timer;
- struct work_struct work;
+ struct work_struct work_add;
+ struct work_struct work_del;
struct device dev;
if (conn->type == ACL_LINK) {
del_timer(&conn->idle_timer);
if (conn->state == BT_CONNECTED) {
- timeo = msecs_to_jiffies(HCI_DISCONN_TIMEOUT);
+ timeo = msecs_to_jiffies(conn->disc_timeout);
if (!conn->out)
- timeo *= 5;
+ timeo *= 2;
} else
timeo = msecs_to_jiffies(10);
} else
int hci_register_sysfs(struct hci_dev *hdev);
void hci_unregister_sysfs(struct hci_dev *hdev);
+void hci_conn_init_sysfs(struct hci_conn *conn);
void hci_conn_add_sysfs(struct hci_conn *conn);
void hci_conn_del_sysfs(struct hci_conn *conn);
#define IP_NAT_RANGE_MAP_IPS 1
#define IP_NAT_RANGE_PROTO_SPECIFIED 2
#define IP_NAT_RANGE_PROTO_RANDOM 4
+#define IP_NAT_RANGE_PERSISTENT 8
/* NAT sequence number modifications */
struct nf_nat_seq {
#include <net/ip.h>
#include <net/tcp_states.h>
#include <net/inet_ecn.h>
+#include <net/dst.h>
#include <linux/seq_file.h>
tcp_fast_path_on(tp);
}
+/* Compute the actual rto_min value */
+static inline u32 tcp_rto_min(struct sock *sk)
+{
+ struct dst_entry *dst = __sk_dst_get(sk);
+ u32 rto_min = TCP_RTO_MIN;
+
+ if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
+ rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
+ return rto_min;
+}
+
/* Compute the actual receive window we are currently advertising.
* Rcv_nxt can be after the window if our peer push more data
* than the offered window.
wake_up_interruptible(sk->sk_sleep);
if (!inet_csk_ack_scheduled(sk))
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
- (3 * TCP_RTO_MIN) / 4,
+ (3 * tcp_rto_min(sk)) / 4,
TCP_RTO_MAX);
}
return 1;
* Well-known fabric addresses.
*/
enum fc_well_known_fid {
+ FC_FID_NONE = 0x000000, /* No destination */
FC_FID_BCAST = 0xffffff, /* broadcast */
FC_FID_FLOGI = 0xfffffe, /* fabric login */
FC_FID_FCTRL = 0xfffffd, /* fabric controller */
enum fc_disc_event);
struct list_head rports;
+ struct list_head rogue_rports;
struct fc_lport *lport;
struct mutex disc_mutex;
struct fc_gpn_ft_resp partial_buf; /* partial name buffer */
struct scsi_host_template;
struct scsi_device;
struct Scsi_Host;
+struct scsi_target;
struct scsi_cmnd;
struct socket;
struct iscsi_transport;
bool xmit_can_sleep);
extern void iscsi_host_remove(struct Scsi_Host *shost);
extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
/*
* session management
OSDv1_ADDITIONAL_CDB_LENGTH = 192,
OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
OSDv1_CAP_LEN = 80,
+
/* Latest supported version */
-/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/
+ OSDv2_ADDITIONAL_CDB_LENGTH = 228,
OSD_ADDITIONAL_CDB_LENGTH =
- OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */
+ OSDv2_ADDITIONAL_CDB_LENGTH,
OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
-/* OSD_CAP_LEN = 104,*/
- OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */
+ OSD_CAP_LEN = 104,
OSD_SYSTEMID_LEN = 20,
- OSD_CRYPTO_KEYID_SIZE = 20,
- /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/
+ OSDv1_CRYPTO_KEYID_SIZE = 20,
+ OSDv2_CRYPTO_KEYID_SIZE = 32,
+ OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
OSD_CRYPTO_SEED_SIZE = 4,
OSD_CRYPTO_NONCE_SIZE = 12,
OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
/* called allocation_length in some commands */
/*32*/ __be64 length;
/*40*/ __be64 start_address;
-/*48*/ __be32 list_identifier;/* Rarely used */
+ union {
+/*48*/ __be32 list_identifier;/* Rarely used */
+ /* OSD2r05 5.2.5 CDB continuation length */
+/*48*/ __be32 cdb_continuation_length;
+ };
} __packed v2;
};
/*52*/ union { /* selected attributes mode Page/List/Single */
/*80*/
/*160 v1*/
-/*184 v2*/
-struct osd_security_parameters {
-/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+struct osdv1_security_parameters {
+/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
/*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
/*192*/osd_cdb_offset data_in_integrity_check_offset;
/*196*/osd_cdb_offset data_out_integrity_check_offset;
} __packed;
/*200 v1*/
-/*224 v2*/
-/* FIXME: osdv2_security_parameters */
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset data_in_integrity_check_offset;
+/*232*/osd_cdb_offset data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+ union {
+ struct osdv1_security_parameters v1;
+ struct osdv2_security_parameters v2;
+ };
+};
struct osdv1_cdb {
struct osd_cdb_head h;
u8 caps[OSDv1_CAP_LEN];
- struct osd_security_parameters sec_params;
+ struct osdv1_security_parameters sec_params;
} __packed;
struct osdv2_cdb {
struct osd_cdb_head h;
u8 caps[OSD_CAP_LEN];
- struct osd_security_parameters sec_params;
- /* FIXME: osdv2_security_parameters */
+ struct osdv2_security_parameters sec_params;
} __packed;
struct osd_cdb {
__be32 attr_id;
} __packed;
+/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+ __be32 attr_page;
+ __be32 attr_id;
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
+ u8 attr_val[0];
+} __packed;
+
/*
* osd2r03: 7.1.3.3 List entry format for retrieved attributes and
* for setting attributes
- * NOTE: v2 is 8-bytes aligned, v1 is not aligned.
+ * NOTE: v2 is 8-bytes aligned
*/
-struct osd_attributes_list_element {
+struct osdv2_attributes_list_element {
__be32 attr_page;
__be32 attr_id;
- __be16 attr_bytes;
+ u8 reserved[6];
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
u8 attr_val[0];
} __packed;
static inline unsigned osdv1_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
OSDv1_ATTRIBUTES_ELEM_ALIGN);
}
static inline unsigned osdv2_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
OSD_ATTRIBUTES_ELEM_ALIGN);
}
__be64 data_bytes;
__be64 set_attributes_bytes;
__be64 get_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_out_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_data_in_integrity_info {
__be64 data_bytes;
__be64 retrieved_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_in_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_timestamp {
u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
} __packed;
OSD_SEC_CAP_NONE1 = BIT(8),
OSD_SEC_CAP_NONE2 = BIT(9),
- OSD_SEC_CAP_NONE3 = BIT(10),
+ OSD_SEC_GBL_REM = BIT(10), /*v2 only*/
OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/
OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/
OSD_SEC_CAP_POL_SEC = BIT(13),
struct osd_capability {
struct osd_capability_head h;
-/* struct osd_cap_object_descriptor od;*/
- struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */
+ struct osd_cap_object_descriptor od;
} __packed;
/**
extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
-/* AC97 platform_data */
-/**
- * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- * a -1 value means no gpio will be used for reset
- *
- * Platform data should only be specified for pxa27x CPUs where a silicon bug
- * prevents correct operation of the reset line. If not specified, the default
- * behaviour is to consider gpio 113 as the AC97 reset line, which is the
- * default on most boards.
- */
-struct pxa2xx_ac97_platform_data {
- int reset_gpio;
-};
-
#endif
DECLARE_TRACE(block_remap,
TP_PROTO(struct request_queue *q, struct bio *bio, dev_t dev,
- sector_t from, sector_t to),
- TP_ARGS(q, bio, dev, from, to));
+ sector_t to),
+ TP_ARGS(q, bio, dev, to));
#endif
--- /dev/null
+/*
+ * Trace files that want to automate creationg of all tracepoints defined
+ * in their file should include this file. The following are macros that the
+ * trace file may define:
+ *
+ * TRACE_SYSTEM defines the system the tracepoint is for
+ *
+ * TRACE_INCLUDE_FILE if the file name is something other than TRACE_SYSTEM.h
+ * This macro may be defined to tell define_trace.h what file to include.
+ * Note, leave off the ".h".
+ *
+ * TRACE_INCLUDE_PATH if the path is something other than core kernel include/trace
+ * then this macro can define the path to use. Note, the path is relative to
+ * define_trace.h, not the file including it. Full path names for out of tree
+ * modules must be used.
+ */
+
+#ifdef CREATE_TRACE_POINTS
+
+/* Prevent recursion */
+#undef CREATE_TRACE_POINTS
+
+#include <linux/stringify.h>
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
+ DEFINE_TRACE(name)
+
+#undef DECLARE_TRACE
+#define DECLARE_TRACE(name, proto, args) \
+ DEFINE_TRACE(name)
+
+#undef TRACE_INCLUDE
+#undef __TRACE_INCLUDE
+
+#ifndef TRACE_INCLUDE_FILE
+# define TRACE_INCLUDE_FILE TRACE_SYSTEM
+# define UNDEF_TRACE_INCLUDE_FILE
+#endif
+
+#ifndef TRACE_INCLUDE_PATH
+# define __TRACE_INCLUDE(system) <trace/events/system.h>
+# define UNDEF_TRACE_INCLUDE_PATH
+#else
+# define __TRACE_INCLUDE(system) __stringify(TRACE_INCLUDE_PATH/system.h)
+#endif
+
+# define TRACE_INCLUDE(system) __TRACE_INCLUDE(system)
+
+/* Let the trace headers be reread */
+#define TRACE_HEADER_MULTI_READ
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#ifdef CONFIG_EVENT_TRACING
+#include <trace/ftrace.h>
+#endif
+
+#undef TRACE_HEADER_MULTI_READ
+
+/* Only undef what we defined in this file */
+#ifdef UNDEF_TRACE_INCLUDE_FILE
+# undef TRACE_INCLUDE_FILE
+# undef UNDEF_TRACE_INCLUDE_FILE
+#endif
+
+#ifdef UNDEF_TRACE_INCLUDE_PATH
+# undef TRACE_INCLUDE_PATH
+# undef UNDEF_TRACE_INCLUDE_PATH
+#endif
+
+/* We may be processing more files */
+#define CREATE_TRACE_POINTS
+
+#endif /* CREATE_TRACE_POINTS */
--- /dev/null
+#if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_IRQ_H
+
+#include <linux/tracepoint.h>
+#include <linux/interrupt.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
+/**
+ * irq_handler_entry - called immediately before the irq action handler
+ * @irq: irq number
+ * @action: pointer to struct irqaction
+ *
+ * The struct irqaction pointed to by @action contains various
+ * information about the handler, including the device name,
+ * @action->name, and the device id, @action->dev_id. When used in
+ * conjunction with the irq_handler_exit tracepoint, we can figure
+ * out irq handler latencies.
+ */
+TRACE_EVENT(irq_handler_entry,
+
+ TP_PROTO(int irq, struct irqaction *action),
+
+ TP_ARGS(irq, action),
+
+ TP_STRUCT__entry(
+ __field( int, irq )
+ __string( name, action->name )
+ ),
+
+ TP_fast_assign(
+ __entry->irq = irq;
+ __assign_str(name, action->name);
+ ),
+
+ TP_printk("irq=%d handler=%s", __entry->irq, __get_str(name))
+);
+
+/**
+ * irq_handler_exit - called immediately after the irq action handler returns
+ * @irq: irq number
+ * @action: pointer to struct irqaction
+ * @ret: return value
+ *
+ * If the @ret value is set to IRQ_HANDLED, then we know that the corresponding
+ * @action->handler scuccessully handled this irq. Otherwise, the irq might be
+ * a shared irq line, or the irq was not handled successfully. Can be used in
+ * conjunction with the irq_handler_entry to understand irq handler latencies.
+ */
+TRACE_EVENT(irq_handler_exit,
+
+ TP_PROTO(int irq, struct irqaction *action, int ret),
+
+ TP_ARGS(irq, action, ret),
+
+ TP_STRUCT__entry(
+ __field( int, irq )
+ __field( int, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->irq = irq;
+ __entry->ret = ret;
+ ),
+
+ TP_printk("irq=%d return=%s",
+ __entry->irq, __entry->ret ? "handled" : "unhandled")
+);
+
+/**
+ * softirq_entry - called immediately before the softirq handler
+ * @h: pointer to struct softirq_action
+ * @vec: pointer to first struct softirq_action in softirq_vec array
+ *
+ * The @h parameter, contains a pointer to the struct softirq_action
+ * which has a pointer to the action handler that is called. By subtracting
+ * the @vec pointer from the @h pointer, we can determine the softirq
+ * number. Also, when used in combination with the softirq_exit tracepoint
+ * we can determine the softirq latency.
+ */
+TRACE_EVENT(softirq_entry,
+
+ TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+
+ TP_ARGS(h, vec),
+
+ TP_STRUCT__entry(
+ __field( int, vec )
+ __string( name, softirq_to_name[h-vec] )
+ ),
+
+ TP_fast_assign(
+ __entry->vec = (int)(h - vec);
+ __assign_str(name, softirq_to_name[h-vec]);
+ ),
+
+ TP_printk("softirq=%d action=%s", __entry->vec, __get_str(name))
+);
+
+/**
+ * softirq_exit - called immediately after the softirq handler returns
+ * @h: pointer to struct softirq_action
+ * @vec: pointer to first struct softirq_action in softirq_vec array
+ *
+ * The @h parameter contains a pointer to the struct softirq_action
+ * that has handled the softirq. By subtracting the @vec pointer from
+ * the @h pointer, we can determine the softirq number. Also, when used in
+ * combination with the softirq_entry tracepoint we can determine the softirq
+ * latency.
+ */
+TRACE_EVENT(softirq_exit,
+
+ TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+
+ TP_ARGS(h, vec),
+
+ TP_STRUCT__entry(
+ __field( int, vec )
+ __string( name, softirq_to_name[h-vec] )
+ ),
+
+ TP_fast_assign(
+ __entry->vec = (int)(h - vec);
+ __assign_str(name, softirq_to_name[h-vec]);
+ ),
+
+ TP_printk("softirq=%d action=%s", __entry->vec, __get_str(name))
+);
+
+#endif /* _TRACE_IRQ_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--- /dev/null
+#if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KMEM_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
+TRACE_EVENT(kmalloc,
+
+ TP_PROTO(unsigned long call_site,
+ const void *ptr,
+ size_t bytes_req,
+ size_t bytes_alloc,
+ gfp_t gfp_flags),
+
+ TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, call_site )
+ __field( const void *, ptr )
+ __field( size_t, bytes_req )
+ __field( size_t, bytes_alloc )
+ __field( gfp_t, gfp_flags )
+ ),
+
+ TP_fast_assign(
+ __entry->call_site = call_site;
+ __entry->ptr = ptr;
+ __entry->bytes_req = bytes_req;
+ __entry->bytes_alloc = bytes_alloc;
+ __entry->gfp_flags = gfp_flags;
+ ),
+
+ TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%08x",
+ __entry->call_site,
+ __entry->ptr,
+ __entry->bytes_req,
+ __entry->bytes_alloc,
+ __entry->gfp_flags)
+);
+
+TRACE_EVENT(kmem_cache_alloc,
+
+ TP_PROTO(unsigned long call_site,
+ const void *ptr,
+ size_t bytes_req,
+ size_t bytes_alloc,
+ gfp_t gfp_flags),
+
+ TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, call_site )
+ __field( const void *, ptr )
+ __field( size_t, bytes_req )
+ __field( size_t, bytes_alloc )
+ __field( gfp_t, gfp_flags )
+ ),
+
+ TP_fast_assign(
+ __entry->call_site = call_site;
+ __entry->ptr = ptr;
+ __entry->bytes_req = bytes_req;
+ __entry->bytes_alloc = bytes_alloc;
+ __entry->gfp_flags = gfp_flags;
+ ),
+
+ TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%08x",
+ __entry->call_site,
+ __entry->ptr,
+ __entry->bytes_req,
+ __entry->bytes_alloc,
+ __entry->gfp_flags)
+);
+
+TRACE_EVENT(kmalloc_node,
+
+ TP_PROTO(unsigned long call_site,
+ const void *ptr,
+ size_t bytes_req,
+ size_t bytes_alloc,
+ gfp_t gfp_flags,
+ int node),
+
+ TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, call_site )
+ __field( const void *, ptr )
+ __field( size_t, bytes_req )
+ __field( size_t, bytes_alloc )
+ __field( gfp_t, gfp_flags )
+ __field( int, node )
+ ),
+
+ TP_fast_assign(
+ __entry->call_site = call_site;
+ __entry->ptr = ptr;
+ __entry->bytes_req = bytes_req;
+ __entry->bytes_alloc = bytes_alloc;
+ __entry->gfp_flags = gfp_flags;
+ __entry->node = node;
+ ),
+
+ TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%08x node=%d",
+ __entry->call_site,
+ __entry->ptr,
+ __entry->bytes_req,
+ __entry->bytes_alloc,
+ __entry->gfp_flags,
+ __entry->node)
+);
+
+TRACE_EVENT(kmem_cache_alloc_node,
+
+ TP_PROTO(unsigned long call_site,
+ const void *ptr,
+ size_t bytes_req,
+ size_t bytes_alloc,
+ gfp_t gfp_flags,
+ int node),
+
+ TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, call_site )
+ __field( const void *, ptr )
+ __field( size_t, bytes_req )
+ __field( size_t, bytes_alloc )
+ __field( gfp_t, gfp_flags )
+ __field( int, node )
+ ),
+
+ TP_fast_assign(
+ __entry->call_site = call_site;
+ __entry->ptr = ptr;
+ __entry->bytes_req = bytes_req;
+ __entry->bytes_alloc = bytes_alloc;
+ __entry->gfp_flags = gfp_flags;
+ __entry->node = node;
+ ),
+
+ TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%08x node=%d",
+ __entry->call_site,
+ __entry->ptr,
+ __entry->bytes_req,
+ __entry->bytes_alloc,
+ __entry->gfp_flags,
+ __entry->node)
+);
+
+TRACE_EVENT(kfree,
+
+ TP_PROTO(unsigned long call_site, const void *ptr),
+
+ TP_ARGS(call_site, ptr),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, call_site )
+ __field( const void *, ptr )
+ ),
+
+ TP_fast_assign(
+ __entry->call_site = call_site;
+ __entry->ptr = ptr;
+ ),
+
+ TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
+);
+
+TRACE_EVENT(kmem_cache_free,
+
+ TP_PROTO(unsigned long call_site, const void *ptr),
+
+ TP_ARGS(call_site, ptr),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, call_site )
+ __field( const void *, ptr )
+ ),
+
+ TP_fast_assign(
+ __entry->call_site = call_site;
+ __entry->ptr = ptr;
+ ),
+
+ TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
+);
+#endif /* _TRACE_KMEM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--- /dev/null
+#if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_LOCKDEP_H
+
+#include <linux/lockdep.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lockdep
+
+#ifdef CONFIG_LOCKDEP
+
+TRACE_EVENT(lock_acquire,
+
+ TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
+ int trylock, int read, int check,
+ struct lockdep_map *next_lock, unsigned long ip),
+
+ TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
+
+ TP_STRUCT__entry(
+ __field(unsigned int, flags)
+ __string(name, lock->name)
+ ),
+
+ TP_fast_assign(
+ __entry->flags = (trylock ? 1 : 0) | (read ? 2 : 0);
+ __assign_str(name, lock->name);
+ ),
+
+ TP_printk("%s%s%s", (__entry->flags & 1) ? "try " : "",
+ (__entry->flags & 2) ? "read " : "",
+ __get_str(name))
+);
+
+TRACE_EVENT(lock_release,
+
+ TP_PROTO(struct lockdep_map *lock, int nested, unsigned long ip),
+
+ TP_ARGS(lock, nested, ip),
+
+ TP_STRUCT__entry(
+ __string(name, lock->name)
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, lock->name);
+ ),
+
+ TP_printk("%s", __get_str(name))
+);
+
+#ifdef CONFIG_LOCK_STAT
+
+TRACE_EVENT(lock_contended,
+
+ TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+ TP_ARGS(lock, ip),
+
+ TP_STRUCT__entry(
+ __string(name, lock->name)
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, lock->name);
+ ),
+
+ TP_printk("%s", __get_str(name))
+);
+
+TRACE_EVENT(lock_acquired,
+ TP_PROTO(struct lockdep_map *lock, unsigned long ip, s64 waittime),
+
+ TP_ARGS(lock, ip, waittime),
+
+ TP_STRUCT__entry(
+ __string(name, lock->name)
+ __field(unsigned long, wait_usec)
+ __field(unsigned long, wait_nsec_rem)
+ ),
+ TP_fast_assign(
+ __assign_str(name, lock->name);
+ __entry->wait_nsec_rem = do_div(waittime, NSEC_PER_USEC);
+ __entry->wait_usec = (unsigned long) waittime;
+ ),
+ TP_printk("%s (%lu.%03lu us)", __get_str(name), __entry->wait_usec,
+ __entry->wait_nsec_rem)
+);
+
+#endif
+#endif
+
+#endif /* _TRACE_LOCKDEP_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--- /dev/null
+#if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SCHED_H
+
+#include <linux/sched.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sched
+
+/*
+ * Tracepoint for calling kthread_stop, performed to end a kthread:
+ */
+TRACE_EVENT(sched_kthread_stop,
+
+ TP_PROTO(struct task_struct *t),
+
+ TP_ARGS(t),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, t->comm, TASK_COMM_LEN);
+ __entry->pid = t->pid;
+ ),
+
+ TP_printk("task %s:%d", __entry->comm, __entry->pid)
+);
+
+/*
+ * Tracepoint for the return value of the kthread stopping:
+ */
+TRACE_EVENT(sched_kthread_stop_ret,
+
+ TP_PROTO(int ret),
+
+ TP_ARGS(ret),
+
+ TP_STRUCT__entry(
+ __field( int, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->ret = ret;
+ ),
+
+ TP_printk("ret %d", __entry->ret)
+);
+
+/*
+ * Tracepoint for waiting on task to unschedule:
+ *
+ * (NOTE: the 'rq' argument is not used by generic trace events,
+ * but used by the latency tracer plugin. )
+ */
+TRACE_EVENT(sched_wait_task,
+
+ TP_PROTO(struct rq *rq, struct task_struct *p),
+
+ TP_ARGS(rq, p),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->prio = p->prio;
+ ),
+
+ TP_printk("task %s:%d [%d]",
+ __entry->comm, __entry->pid, __entry->prio)
+);
+
+/*
+ * Tracepoint for waking up a task:
+ *
+ * (NOTE: the 'rq' argument is not used by generic trace events,
+ * but used by the latency tracer plugin. )
+ */
+TRACE_EVENT(sched_wakeup,
+
+ TP_PROTO(struct rq *rq, struct task_struct *p, int success),
+
+ TP_ARGS(rq, p, success),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ __field( int, success )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->prio = p->prio;
+ __entry->success = success;
+ ),
+
+ TP_printk("task %s:%d [%d] success=%d",
+ __entry->comm, __entry->pid, __entry->prio,
+ __entry->success)
+);
+
+/*
+ * Tracepoint for waking up a new task:
+ *
+ * (NOTE: the 'rq' argument is not used by generic trace events,
+ * but used by the latency tracer plugin. )
+ */
+TRACE_EVENT(sched_wakeup_new,
+
+ TP_PROTO(struct rq *rq, struct task_struct *p, int success),
+
+ TP_ARGS(rq, p, success),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ __field( int, success )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->prio = p->prio;
+ __entry->success = success;
+ ),
+
+ TP_printk("task %s:%d [%d] success=%d",
+ __entry->comm, __entry->pid, __entry->prio,
+ __entry->success)
+);
+
+/*
+ * Tracepoint for task switches, performed by the scheduler:
+ *
+ * (NOTE: the 'rq' argument is not used by generic trace events,
+ * but used by the latency tracer plugin. )
+ */
+TRACE_EVENT(sched_switch,
+
+ TP_PROTO(struct rq *rq, struct task_struct *prev,
+ struct task_struct *next),
+
+ TP_ARGS(rq, prev, next),
+
+ TP_STRUCT__entry(
+ __array( char, prev_comm, TASK_COMM_LEN )
+ __field( pid_t, prev_pid )
+ __field( int, prev_prio )
+ __array( char, next_comm, TASK_COMM_LEN )
+ __field( pid_t, next_pid )
+ __field( int, next_prio )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
+ __entry->prev_pid = prev->pid;
+ __entry->prev_prio = prev->prio;
+ memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
+ __entry->next_pid = next->pid;
+ __entry->next_prio = next->prio;
+ ),
+
+ TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
+ __entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
+ __entry->next_comm, __entry->next_pid, __entry->next_prio)
+);
+
+/*
+ * Tracepoint for a task being migrated:
+ */
+TRACE_EVENT(sched_migrate_task,
+
+ TP_PROTO(struct task_struct *p, int dest_cpu),
+
+ TP_ARGS(p, dest_cpu),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ __field( int, orig_cpu )
+ __field( int, dest_cpu )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->prio = p->prio;
+ __entry->orig_cpu = task_cpu(p);
+ __entry->dest_cpu = dest_cpu;
+ ),
+
+ TP_printk("task %s:%d [%d] from: %d to: %d",
+ __entry->comm, __entry->pid, __entry->prio,
+ __entry->orig_cpu, __entry->dest_cpu)
+);
+
+/*
+ * Tracepoint for freeing a task:
+ */
+TRACE_EVENT(sched_process_free,
+
+ TP_PROTO(struct task_struct *p),
+
+ TP_ARGS(p),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->prio = p->prio;
+ ),
+
+ TP_printk("task %s:%d [%d]",
+ __entry->comm, __entry->pid, __entry->prio)
+);
+
+/*
+ * Tracepoint for a task exiting:
+ */
+TRACE_EVENT(sched_process_exit,
+
+ TP_PROTO(struct task_struct *p),
+
+ TP_ARGS(p),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->prio = p->prio;
+ ),
+
+ TP_printk("task %s:%d [%d]",
+ __entry->comm, __entry->pid, __entry->prio)
+);
+
+/*
+ * Tracepoint for a waiting task:
+ */
+TRACE_EVENT(sched_process_wait,
+
+ TP_PROTO(struct pid *pid),
+
+ TP_ARGS(pid),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( int, prio )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+ __entry->pid = pid_nr(pid);
+ __entry->prio = current->prio;
+ ),
+
+ TP_printk("task %s:%d [%d]",
+ __entry->comm, __entry->pid, __entry->prio)
+);
+
+/*
+ * Tracepoint for do_fork:
+ */
+TRACE_EVENT(sched_process_fork,
+
+ TP_PROTO(struct task_struct *parent, struct task_struct *child),
+
+ TP_ARGS(parent, child),
+
+ TP_STRUCT__entry(
+ __array( char, parent_comm, TASK_COMM_LEN )
+ __field( pid_t, parent_pid )
+ __array( char, child_comm, TASK_COMM_LEN )
+ __field( pid_t, child_pid )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->parent_comm, parent->comm, TASK_COMM_LEN);
+ __entry->parent_pid = parent->pid;
+ memcpy(__entry->child_comm, child->comm, TASK_COMM_LEN);
+ __entry->child_pid = child->pid;
+ ),
+
+ TP_printk("parent %s:%d child %s:%d",
+ __entry->parent_comm, __entry->parent_pid,
+ __entry->child_comm, __entry->child_pid)
+);
+
+/*
+ * Tracepoint for sending a signal:
+ */
+TRACE_EVENT(sched_signal_send,
+
+ TP_PROTO(int sig, struct task_struct *p),
+
+ TP_ARGS(sig, p),
+
+ TP_STRUCT__entry(
+ __field( int, sig )
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+ __entry->pid = p->pid;
+ __entry->sig = sig;
+ ),
+
+ TP_printk("sig: %d task %s:%d",
+ __entry->sig, __entry->comm, __entry->pid)
+);
+
+#endif /* _TRACE_SCHED_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--- /dev/null
+#if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SKB_H
+
+#include <linux/skbuff.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
+/*
+ * Tracepoint for free an sk_buff:
+ */
+TRACE_EVENT(kfree_skb,
+
+ TP_PROTO(struct sk_buff *skb, void *location),
+
+ TP_ARGS(skb, location),
+
+ TP_STRUCT__entry(
+ __field( void *, skbaddr )
+ __field( unsigned short, protocol )
+ __field( void *, location )
+ ),
+
+ TP_fast_assign(
+ __entry->skbaddr = skb;
+ if (skb) {
+ __entry->protocol = ntohs(skb->protocol);
+ }
+ __entry->location = location;
+ ),
+
+ TP_printk("skbaddr=%p protocol=%u location=%p",
+ __entry->skbaddr, __entry->protocol, __entry->location)
+);
+
+#endif /* _TRACE_SKB_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--- /dev/null
+/*
+ * Stage 1 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * struct ftrace_raw_<call> {
+ * struct trace_entry ent;
+ * <type> <item>;
+ * <type2> <item2>[<len>];
+ * [...]
+ * };
+ *
+ * The <type> <item> is created by the __field(type, item) macro or
+ * the __array(type2, item2, len) macro.
+ * We simply do "type item;", and that will create the fields
+ * in the structure.
+ */
+
+#include <linux/ftrace_event.h>
+
+#undef __array
+#define __array(type, item, len) type item[len];
+
+#undef __field
+#define __field(type, item) type item;
+
+#undef __string
+#define __string(item, src) int __str_loc_##item;
+
+#undef TP_STRUCT__entry
+#define TP_STRUCT__entry(args...) args
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
+ struct ftrace_raw_##name { \
+ struct trace_entry ent; \
+ tstruct \
+ char __str_data[0]; \
+ }; \
+ static struct ftrace_event_call event_##name
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+
+/*
+ * Stage 2 of the trace events.
+ *
+ * Include the following:
+ *
+ * struct ftrace_str_offsets_<call> {
+ * int <str1>;
+ * int <str2>;
+ * [...]
+ * };
+ *
+ * The __string() macro will create each int <str>, this is to
+ * keep the offset of each string from the beggining of the event
+ * once we perform the strlen() of the src strings.
+ *
+ */
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __field
+#define __field(type, item);
+
+#undef __string
+#define __string(item, src) int item;
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+ struct ftrace_str_offsets_##call { \
+ tstruct; \
+ };
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Stage 3 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * enum print_line_t
+ * ftrace_raw_output_<call>(struct trace_iterator *iter, int flags)
+ * {
+ * struct trace_seq *s = &iter->seq;
+ * struct ftrace_raw_<call> *field; <-- defined in stage 1
+ * struct trace_entry *entry;
+ * int ret;
+ *
+ * entry = iter->ent;
+ *
+ * if (entry->type != event_<call>.id) {
+ * WARN_ON_ONCE(1);
+ * return TRACE_TYPE_UNHANDLED;
+ * }
+ *
+ * field = (typeof(field))entry;
+ *
+ * ret = trace_seq_printf(s, <TP_printk> "\n");
+ * if (!ret)
+ * return TRACE_TYPE_PARTIAL_LINE;
+ *
+ * return TRACE_TYPE_HANDLED;
+ * }
+ *
+ * This is the method used to print the raw event to the trace
+ * output format. Note, this is not needed if the data is read
+ * in binary.
+ */
+
+#undef __entry
+#define __entry field
+
+#undef TP_printk
+#define TP_printk(fmt, args...) fmt "\n", args
+
+#undef __get_str
+#define __get_str(field) ((char *)__entry + __entry->__str_loc_##field)
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+enum print_line_t \
+ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \
+{ \
+ struct trace_seq *s = &iter->seq; \
+ struct ftrace_raw_##call *field; \
+ struct trace_entry *entry; \
+ int ret; \
+ \
+ entry = iter->ent; \
+ \
+ if (entry->type != event_##call.id) { \
+ WARN_ON_ONCE(1); \
+ return TRACE_TYPE_UNHANDLED; \
+ } \
+ \
+ field = (typeof(field))entry; \
+ \
+ ret = trace_seq_printf(s, #call ": " print); \
+ if (!ret) \
+ return TRACE_TYPE_PARTIAL_LINE; \
+ \
+ return TRACE_TYPE_HANDLED; \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Setup the showing format of trace point.
+ *
+ * int
+ * ftrace_format_##call(struct trace_seq *s)
+ * {
+ * struct ftrace_raw_##call field;
+ * int ret;
+ *
+ * ret = trace_seq_printf(s, #type " " #item ";"
+ * " offset:%u; size:%u;\n",
+ * offsetof(struct ftrace_raw_##call, item),
+ * sizeof(field.type));
+ *
+ * }
+ */
+
+#undef TP_STRUCT__entry
+#define TP_STRUCT__entry(args...) args
+
+#undef __field
+#define __field(type, item) \
+ ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t" \
+ "offset:%u;\tsize:%u;\n", \
+ (unsigned int)offsetof(typeof(field), item), \
+ (unsigned int)sizeof(field.item)); \
+ if (!ret) \
+ return 0;
+
+#undef __array
+#define __array(type, item, len) \
+ ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
+ "offset:%u;\tsize:%u;\n", \
+ (unsigned int)offsetof(typeof(field), item), \
+ (unsigned int)sizeof(field.item)); \
+ if (!ret) \
+ return 0;
+
+#undef __string
+#define __string(item, src) \
+ ret = trace_seq_printf(s, "\tfield: __str_loc " #item ";\t" \
+ "offset:%u;tsize:%u;\n", \
+ (unsigned int)offsetof(typeof(field), \
+ __str_loc_##item), \
+ (unsigned int)sizeof(field.__str_loc_##item)); \
+ if (!ret) \
+ return 0;
+
+#undef __entry
+#define __entry REC
+
+#undef TP_printk
+#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
+
+#undef TP_fast_assign
+#define TP_fast_assign(args...) args
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
+static int \
+ftrace_format_##call(struct trace_seq *s) \
+{ \
+ struct ftrace_raw_##call field __attribute__((unused)); \
+ int ret = 0; \
+ \
+ tstruct; \
+ \
+ trace_seq_printf(s, "\nprint fmt: " print); \
+ \
+ return ret; \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef __field
+#define __field(type, item) \
+ ret = trace_define_field(event_call, #type, #item, \
+ offsetof(typeof(field), item), \
+ sizeof(field.item), is_signed_type(type)); \
+ if (ret) \
+ return ret;
+
+#undef __array
+#define __array(type, item, len) \
+ BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \
+ ret = trace_define_field(event_call, #type "[" #len "]", #item, \
+ offsetof(typeof(field), item), \
+ sizeof(field.item), 0); \
+ if (ret) \
+ return ret;
+
+#undef __string
+#define __string(item, src) \
+ ret = trace_define_field(event_call, "__str_loc", #item, \
+ offsetof(typeof(field), __str_loc_##item), \
+ sizeof(field.__str_loc_##item), 0);
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
+int \
+ftrace_define_fields_##call(void) \
+{ \
+ struct ftrace_raw_##call field; \
+ struct ftrace_event_call *event_call = &event_##call; \
+ int ret; \
+ \
+ __common_field(int, type, 1); \
+ __common_field(unsigned char, flags, 0); \
+ __common_field(unsigned char, preempt_count, 0); \
+ __common_field(int, pid, 1); \
+ __common_field(int, tgid, 1); \
+ \
+ tstruct; \
+ \
+ return ret; \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Stage 4 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * static void ftrace_event_<call>(proto)
+ * {
+ * event_trace_printk(_RET_IP_, "<call>: " <fmt>);
+ * }
+ *
+ * static int ftrace_reg_event_<call>(void)
+ * {
+ * int ret;
+ *
+ * ret = register_trace_<call>(ftrace_event_<call>);
+ * if (!ret)
+ * pr_info("event trace: Could not activate trace point "
+ * "probe to <call>");
+ * return ret;
+ * }
+ *
+ * static void ftrace_unreg_event_<call>(void)
+ * {
+ * unregister_trace_<call>(ftrace_event_<call>);
+ * }
+ *
+ *
+ * For those macros defined with TRACE_EVENT:
+ *
+ * static struct ftrace_event_call event_<call>;
+ *
+ * static void ftrace_raw_event_<call>(proto)
+ * {
+ * struct ring_buffer_event *event;
+ * struct ftrace_raw_<call> *entry; <-- defined in stage 1
+ * unsigned long irq_flags;
+ * int pc;
+ *
+ * local_save_flags(irq_flags);
+ * pc = preempt_count();
+ *
+ * event = trace_current_buffer_lock_reserve(event_<call>.id,
+ * sizeof(struct ftrace_raw_<call>),
+ * irq_flags, pc);
+ * if (!event)
+ * return;
+ * entry = ring_buffer_event_data(event);
+ *
+ * <assign>; <-- Here we assign the entries by the __field and
+ * __array macros.
+ *
+ * trace_current_buffer_unlock_commit(event, irq_flags, pc);
+ * }
+ *
+ * static int ftrace_raw_reg_event_<call>(void)
+ * {
+ * int ret;
+ *
+ * ret = register_trace_<call>(ftrace_raw_event_<call>);
+ * if (!ret)
+ * pr_info("event trace: Could not activate trace point "
+ * "probe to <call>");
+ * return ret;
+ * }
+ *
+ * static void ftrace_unreg_event_<call>(void)
+ * {
+ * unregister_trace_<call>(ftrace_raw_event_<call>);
+ * }
+ *
+ * static struct trace_event ftrace_event_type_<call> = {
+ * .trace = ftrace_raw_output_<call>, <-- stage 2
+ * };
+ *
+ * static int ftrace_raw_init_event_<call>(void)
+ * {
+ * int id;
+ *
+ * id = register_ftrace_event(&ftrace_event_type_<call>);
+ * if (!id)
+ * return -ENODEV;
+ * event_<call>.id = id;
+ * return 0;
+ * }
+ *
+ * static struct ftrace_event_call __used
+ * __attribute__((__aligned__(4)))
+ * __attribute__((section("_ftrace_events"))) event_<call> = {
+ * .name = "<call>",
+ * .system = "<system>",
+ * .raw_init = ftrace_raw_init_event_<call>,
+ * .regfunc = ftrace_reg_event_<call>,
+ * .unregfunc = ftrace_unreg_event_<call>,
+ * .show_format = ftrace_format_<call>,
+ * }
+ *
+ */
+
+#undef TP_FMT
+#define TP_FMT(fmt, args...) fmt "\n", ##args
+
+#ifdef CONFIG_EVENT_PROFILE
+#define _TRACE_PROFILE(call, proto, args) \
+static void ftrace_profile_##call(proto) \
+{ \
+ extern void perf_tpcounter_event(int); \
+ perf_tpcounter_event(event_##call.id); \
+} \
+ \
+static int ftrace_profile_enable_##call(struct ftrace_event_call *call) \
+{ \
+ int ret = 0; \
+ \
+ if (!atomic_inc_return(&call->profile_count)) \
+ ret = register_trace_##call(ftrace_profile_##call); \
+ \
+ return ret; \
+} \
+ \
+static void ftrace_profile_disable_##call(struct ftrace_event_call *call) \
+{ \
+ if (atomic_add_negative(-1, &call->profile_count)) \
+ unregister_trace_##call(ftrace_profile_##call); \
+}
+
+#define _TRACE_PROFILE_INIT(call) \
+ .profile_count = ATOMIC_INIT(-1), \
+ .profile_enable = ftrace_profile_enable_##call, \
+ .profile_disable = ftrace_profile_disable_##call,
+
+#else
+#define _TRACE_PROFILE(call, proto, args)
+#define _TRACE_PROFILE_INIT(call)
+#endif
+
+#undef __entry
+#define __entry entry
+
+#undef __field
+#define __field(type, item)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __string
+#define __string(item, src) \
+ __str_offsets.item = __str_size + \
+ offsetof(typeof(*entry), __str_data); \
+ __str_size += strlen(src) + 1;
+
+#undef __assign_str
+#define __assign_str(dst, src) \
+ __entry->__str_loc_##dst = __str_offsets.dst; \
+ strcpy(__get_str(dst), src);
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args)) \
+ \
+static struct ftrace_event_call event_##call; \
+ \
+static void ftrace_raw_event_##call(proto) \
+{ \
+ struct ftrace_str_offsets_##call __maybe_unused __str_offsets; \
+ struct ftrace_event_call *call = &event_##call; \
+ struct ring_buffer_event *event; \
+ struct ftrace_raw_##call *entry; \
+ unsigned long irq_flags; \
+ int __str_size = 0; \
+ int pc; \
+ \
+ local_save_flags(irq_flags); \
+ pc = preempt_count(); \
+ \
+ tstruct; \
+ \
+ event = trace_current_buffer_lock_reserve(event_##call.id, \
+ sizeof(struct ftrace_raw_##call) + __str_size,\
+ irq_flags, pc); \
+ if (!event) \
+ return; \
+ entry = ring_buffer_event_data(event); \
+ \
+ assign; \
+ \
+ if (!filter_current_check_discard(call, entry, event)) \
+ trace_nowake_buffer_unlock_commit(event, irq_flags, pc); \
+} \
+ \
+static int ftrace_raw_reg_event_##call(void) \
+{ \
+ int ret; \
+ \
+ ret = register_trace_##call(ftrace_raw_event_##call); \
+ if (ret) \
+ pr_info("event trace: Could not activate trace point " \
+ "probe to " #call "\n"); \
+ return ret; \
+} \
+ \
+static void ftrace_raw_unreg_event_##call(void) \
+{ \
+ unregister_trace_##call(ftrace_raw_event_##call); \
+} \
+ \
+static struct trace_event ftrace_event_type_##call = { \
+ .trace = ftrace_raw_output_##call, \
+}; \
+ \
+static int ftrace_raw_init_event_##call(void) \
+{ \
+ int id; \
+ \
+ id = register_ftrace_event(&ftrace_event_type_##call); \
+ if (!id) \
+ return -ENODEV; \
+ event_##call.id = id; \
+ INIT_LIST_HEAD(&event_##call.fields); \
+ init_preds(&event_##call); \
+ return 0; \
+} \
+ \
+static struct ftrace_event_call __used \
+__attribute__((__aligned__(4))) \
+__attribute__((section("_ftrace_events"))) event_##call = { \
+ .name = #call, \
+ .system = __stringify(TRACE_SYSTEM), \
+ .event = &ftrace_event_type_##call, \
+ .raw_init = ftrace_raw_init_event_##call, \
+ .regfunc = ftrace_raw_reg_event_##call, \
+ .unregfunc = ftrace_raw_unreg_event_##call, \
+ .show_format = ftrace_format_##call, \
+ .define_fields = ftrace_define_fields_##call, \
+ _TRACE_PROFILE_INIT(call) \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef _TRACE_PROFILE
+#undef _TRACE_PROFILE_INIT
+
+++ /dev/null
-#ifndef _TRACE_IRQ_H
-#define _TRACE_IRQ_H
-
-#include <linux/interrupt.h>
-#include <linux/tracepoint.h>
-
-#include <trace/irq_event_types.h>
-
-#endif
+++ /dev/null
-
-/* use <trace/irq.h> instead */
-#ifndef TRACE_FORMAT
-# error Do not include this file directly.
-# error Unless you know what you are doing.
-#endif
-
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM irq
-
-/*
- * Tracepoint for entry of interrupt handler:
- */
-TRACE_FORMAT(irq_handler_entry,
- TP_PROTO(int irq, struct irqaction *action),
- TP_ARGS(irq, action),
- TP_FMT("irq=%d handler=%s", irq, action->name)
- );
-
-/*
- * Tracepoint for return of an interrupt handler:
- */
-TRACE_EVENT(irq_handler_exit,
-
- TP_PROTO(int irq, struct irqaction *action, int ret),
-
- TP_ARGS(irq, action, ret),
-
- TP_STRUCT__entry(
- __field( int, irq )
- __field( int, ret )
- ),
-
- TP_fast_assign(
- __entry->irq = irq;
- __entry->ret = ret;
- ),
-
- TP_printk("irq=%d return=%s",
- __entry->irq, __entry->ret ? "handled" : "unhandled")
-);
-
-TRACE_FORMAT(softirq_entry,
- TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
- TP_ARGS(h, vec),
- TP_FMT("softirq=%d action=%s", (int)(h - vec), softirq_to_name[h-vec])
- );
-
-TRACE_FORMAT(softirq_exit,
- TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
- TP_ARGS(h, vec),
- TP_FMT("softirq=%d action=%s", (int)(h - vec), softirq_to_name[h-vec])
- );
-
-#undef TRACE_SYSTEM
+++ /dev/null
-/*
- * Copyright (C) 2008 Eduard - Gabriel Munteanu
- *
- * This file is released under GPL version 2.
- */
-
-#ifndef _LINUX_KMEMTRACE_H
-#define _LINUX_KMEMTRACE_H
-
-#ifdef __KERNEL__
-
-#include <linux/tracepoint.h>
-#include <linux/types.h>
-
-#ifdef CONFIG_KMEMTRACE
-extern void kmemtrace_init(void);
-#else
-static inline void kmemtrace_init(void)
-{
-}
-#endif
-
-DECLARE_TRACE(kmalloc,
- TP_PROTO(unsigned long call_site,
- const void *ptr,
- size_t bytes_req,
- size_t bytes_alloc,
- gfp_t gfp_flags),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags));
-DECLARE_TRACE(kmem_cache_alloc,
- TP_PROTO(unsigned long call_site,
- const void *ptr,
- size_t bytes_req,
- size_t bytes_alloc,
- gfp_t gfp_flags),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags));
-DECLARE_TRACE(kmalloc_node,
- TP_PROTO(unsigned long call_site,
- const void *ptr,
- size_t bytes_req,
- size_t bytes_alloc,
- gfp_t gfp_flags,
- int node),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node));
-DECLARE_TRACE(kmem_cache_alloc_node,
- TP_PROTO(unsigned long call_site,
- const void *ptr,
- size_t bytes_req,
- size_t bytes_alloc,
- gfp_t gfp_flags,
- int node),
- TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node));
-DECLARE_TRACE(kfree,
- TP_PROTO(unsigned long call_site, const void *ptr),
- TP_ARGS(call_site, ptr));
-DECLARE_TRACE(kmem_cache_free,
- TP_PROTO(unsigned long call_site, const void *ptr),
- TP_ARGS(call_site, ptr));
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_KMEMTRACE_H */
-
+++ /dev/null
-#ifndef _TRACE_LOCKDEP_H
-#define _TRACE_LOCKDEP_H
-
-#include <linux/lockdep.h>
-#include <linux/tracepoint.h>
-
-#include <trace/lockdep_event_types.h>
-
-#endif
+++ /dev/null
-
-#ifndef TRACE_FORMAT
-# error Do not include this file directly.
-# error Unless you know what you are doing.
-#endif
-
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lock
-
-#ifdef CONFIG_LOCKDEP
-
-TRACE_FORMAT(lock_acquire,
- TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
- int trylock, int read, int check,
- struct lockdep_map *next_lock, unsigned long ip),
- TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
- TP_FMT("%s%s%s", trylock ? "try " : "",
- read ? "read " : "", lock->name)
- );
-
-TRACE_FORMAT(lock_release,
- TP_PROTO(struct lockdep_map *lock, int nested, unsigned long ip),
- TP_ARGS(lock, nested, ip),
- TP_FMT("%s", lock->name)
- );
-
-#ifdef CONFIG_LOCK_STAT
-
-TRACE_FORMAT(lock_contended,
- TP_PROTO(struct lockdep_map *lock, unsigned long ip),
- TP_ARGS(lock, ip),
- TP_FMT("%s", lock->name)
- );
-
-TRACE_FORMAT(lock_acquired,
- TP_PROTO(struct lockdep_map *lock, unsigned long ip),
- TP_ARGS(lock, ip),
- TP_FMT("%s", lock->name)
- );
-
-#endif
-#endif
-
-#undef TRACE_SYSTEM
+++ /dev/null
-#ifndef _TRACE_SCHED_H
-#define _TRACE_SCHED_H
-
-#include <linux/sched.h>
-#include <linux/tracepoint.h>
-
-#include <trace/sched_event_types.h>
-
-#endif
+++ /dev/null
-
-/* use <trace/sched.h> instead */
-#ifndef TRACE_EVENT
-# error Do not include this file directly.
-# error Unless you know what you are doing.
-#endif
-
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM sched
-
-/*
- * Tracepoint for calling kthread_stop, performed to end a kthread:
- */
-TRACE_EVENT(sched_kthread_stop,
-
- TP_PROTO(struct task_struct *t),
-
- TP_ARGS(t),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, t->comm, TASK_COMM_LEN);
- __entry->pid = t->pid;
- ),
-
- TP_printk("task %s:%d", __entry->comm, __entry->pid)
-);
-
-/*
- * Tracepoint for the return value of the kthread stopping:
- */
-TRACE_EVENT(sched_kthread_stop_ret,
-
- TP_PROTO(int ret),
-
- TP_ARGS(ret),
-
- TP_STRUCT__entry(
- __field( int, ret )
- ),
-
- TP_fast_assign(
- __entry->ret = ret;
- ),
-
- TP_printk("ret %d", __entry->ret)
-);
-
-/*
- * Tracepoint for waiting on task to unschedule:
- *
- * (NOTE: the 'rq' argument is not used by generic trace events,
- * but used by the latency tracer plugin. )
- */
-TRACE_EVENT(sched_wait_task,
-
- TP_PROTO(struct rq *rq, struct task_struct *p),
-
- TP_ARGS(rq, p),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->prio = p->prio;
- ),
-
- TP_printk("task %s:%d [%d]",
- __entry->comm, __entry->pid, __entry->prio)
-);
-
-/*
- * Tracepoint for waking up a task:
- *
- * (NOTE: the 'rq' argument is not used by generic trace events,
- * but used by the latency tracer plugin. )
- */
-TRACE_EVENT(sched_wakeup,
-
- TP_PROTO(struct rq *rq, struct task_struct *p, int success),
-
- TP_ARGS(rq, p, success),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- __field( int, success )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->prio = p->prio;
- __entry->success = success;
- ),
-
- TP_printk("task %s:%d [%d] success=%d",
- __entry->comm, __entry->pid, __entry->prio,
- __entry->success)
-);
-
-/*
- * Tracepoint for waking up a new task:
- *
- * (NOTE: the 'rq' argument is not used by generic trace events,
- * but used by the latency tracer plugin. )
- */
-TRACE_EVENT(sched_wakeup_new,
-
- TP_PROTO(struct rq *rq, struct task_struct *p, int success),
-
- TP_ARGS(rq, p, success),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- __field( int, success )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->prio = p->prio;
- __entry->success = success;
- ),
-
- TP_printk("task %s:%d [%d] success=%d",
- __entry->comm, __entry->pid, __entry->prio,
- __entry->success)
-);
-
-/*
- * Tracepoint for task switches, performed by the scheduler:
- *
- * (NOTE: the 'rq' argument is not used by generic trace events,
- * but used by the latency tracer plugin. )
- */
-TRACE_EVENT(sched_switch,
-
- TP_PROTO(struct rq *rq, struct task_struct *prev,
- struct task_struct *next),
-
- TP_ARGS(rq, prev, next),
-
- TP_STRUCT__entry(
- __array( char, prev_comm, TASK_COMM_LEN )
- __field( pid_t, prev_pid )
- __field( int, prev_prio )
- __array( char, next_comm, TASK_COMM_LEN )
- __field( pid_t, next_pid )
- __field( int, next_prio )
- ),
-
- TP_fast_assign(
- memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
- __entry->prev_pid = prev->pid;
- __entry->prev_prio = prev->prio;
- memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
- __entry->next_pid = next->pid;
- __entry->next_prio = next->prio;
- ),
-
- TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
- __entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
- __entry->next_comm, __entry->next_pid, __entry->next_prio)
-);
-
-/*
- * Tracepoint for a task being migrated:
- */
-TRACE_EVENT(sched_migrate_task,
-
- TP_PROTO(struct task_struct *p, int orig_cpu, int dest_cpu),
-
- TP_ARGS(p, orig_cpu, dest_cpu),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- __field( int, orig_cpu )
- __field( int, dest_cpu )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->prio = p->prio;
- __entry->orig_cpu = orig_cpu;
- __entry->dest_cpu = dest_cpu;
- ),
-
- TP_printk("task %s:%d [%d] from: %d to: %d",
- __entry->comm, __entry->pid, __entry->prio,
- __entry->orig_cpu, __entry->dest_cpu)
-);
-
-/*
- * Tracepoint for freeing a task:
- */
-TRACE_EVENT(sched_process_free,
-
- TP_PROTO(struct task_struct *p),
-
- TP_ARGS(p),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->prio = p->prio;
- ),
-
- TP_printk("task %s:%d [%d]",
- __entry->comm, __entry->pid, __entry->prio)
-);
-
-/*
- * Tracepoint for a task exiting:
- */
-TRACE_EVENT(sched_process_exit,
-
- TP_PROTO(struct task_struct *p),
-
- TP_ARGS(p),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->prio = p->prio;
- ),
-
- TP_printk("task %s:%d [%d]",
- __entry->comm, __entry->pid, __entry->prio)
-);
-
-/*
- * Tracepoint for a waiting task:
- */
-TRACE_EVENT(sched_process_wait,
-
- TP_PROTO(struct pid *pid),
-
- TP_ARGS(pid),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( int, prio )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
- __entry->pid = pid_nr(pid);
- __entry->prio = current->prio;
- ),
-
- TP_printk("task %s:%d [%d]",
- __entry->comm, __entry->pid, __entry->prio)
-);
-
-/*
- * Tracepoint for do_fork:
- */
-TRACE_EVENT(sched_process_fork,
-
- TP_PROTO(struct task_struct *parent, struct task_struct *child),
-
- TP_ARGS(parent, child),
-
- TP_STRUCT__entry(
- __array( char, parent_comm, TASK_COMM_LEN )
- __field( pid_t, parent_pid )
- __array( char, child_comm, TASK_COMM_LEN )
- __field( pid_t, child_pid )
- ),
-
- TP_fast_assign(
- memcpy(__entry->parent_comm, parent->comm, TASK_COMM_LEN);
- __entry->parent_pid = parent->pid;
- memcpy(__entry->child_comm, child->comm, TASK_COMM_LEN);
- __entry->child_pid = child->pid;
- ),
-
- TP_printk("parent %s:%d child %s:%d",
- __entry->parent_comm, __entry->parent_pid,
- __entry->child_comm, __entry->child_pid)
-);
-
-/*
- * Tracepoint for sending a signal:
- */
-TRACE_EVENT(sched_signal_send,
-
- TP_PROTO(int sig, struct task_struct *p),
-
- TP_ARGS(sig, p),
-
- TP_STRUCT__entry(
- __field( int, sig )
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
- __entry->pid = p->pid;
- __entry->sig = sig;
- ),
-
- TP_printk("sig: %d task %s:%d",
- __entry->sig, __entry->comm, __entry->pid)
-);
-
-#undef TRACE_SYSTEM
+++ /dev/null
-#ifndef _TRACE_SKB_H_
-#define _TRACE_SKB_H_
-
-#include <linux/skbuff.h>
-#include <linux/tracepoint.h>
-
-DECLARE_TRACE(kfree_skb,
- TP_PROTO(struct sk_buff *skb, void *location),
- TP_ARGS(skb, location));
-
-#endif
+++ /dev/null
-/* trace/<type>_event_types.h here */
-
-#include <trace/sched_event_types.h>
-#include <trace/irq_event_types.h>
-#include <trace/lockdep_event_types.h>
+++ /dev/null
-/* trace/<type>.h here */
-
-#include <trace/sched.h>
-#include <trace/irq.h>
-#include <trace/lockdep.h>
#include <linux/idr.h>
#include <linux/ftrace.h>
#include <linux/async.h>
+#include <linux/kmemtrace.h>
#include <trace/boot.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>
-#include <trace/kmemtrace.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/smp.h>
#include <linux/tracehook.h>
#include <linux/fs_struct.h>
#include <linux/init_task.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/mmu_context.h>
#include "cred-internals.h"
-DEFINE_TRACE(sched_process_free);
-DEFINE_TRACE(sched_process_exit);
-DEFINE_TRACE(sched_process_wait);
-
static void exit_mm(struct task_struct * tsk);
static void __unhash_process(struct task_struct *p)
#include <linux/proc_fs.h>
#include <linux/blkdev.h>
#include <linux/fs_struct.h>
-#include <trace/sched.h>
#include <linux/magic.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#include <trace/events/sched.h>
+
/*
* Protected counters by write_lock_irq(&tasklist_lock)
*/
__cacheline_aligned DEFINE_RWLOCK(tasklist_lock); /* outer */
-DEFINE_TRACE(sched_process_fork);
-
int nr_processes(void)
{
int cpu;
#include <linux/kernel_stat.h>
#include <linux/rculist.h>
#include <linux/hash.h>
-#include <trace/irq.h>
#include <linux/bootmem.h>
+#include <trace/events/irq.h>
#include "internals.h"
"but no thread function available.", irq, action->name);
}
-DEFINE_TRACE(irq_handler_entry);
-DEFINE_TRACE(irq_handler_exit);
-
/**
* handle_IRQ_event - irq action chain handler
* @irq: the interrupt number
irqreturn_t ret, retval = IRQ_NONE;
unsigned int status = 0;
- WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!");
-
if (!(action->flags & IRQF_DISABLED))
local_irq_enable_in_hardirq();
spin_lock_irqsave(&desc->lock, flags);
#ifdef CONFIG_GENERIC_PENDING_IRQ
- if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- cpumask_copy(desc->affinity, cpumask);
+ if (desc->status & IRQ_MOVE_PCNTXT)
desc->chip->set_affinity(irq, cpumask);
- } else {
+ else {
desc->status |= IRQ_MOVE_PENDING;
cpumask_copy(desc->pending_mask, cpumask);
}
#include <linux/file.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
#define KTHREAD_NICE_LEVEL (-5)
static LIST_HEAD(kthread_create_list);
struct task_struct *kthreadd_task;
-DEFINE_TRACE(sched_kthread_stop);
-DEFINE_TRACE(sched_kthread_stop_ret);
-
struct kthread_create_info
{
/* Information passed to kthread() from kthreadd. */
#include <linux/hash.h>
#include <linux/ftrace.h>
#include <linux/stringify.h>
-#include <trace/lockdep.h>
#include <asm/sections.h>
#include "lockdep_internals.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/lockdep.h>
+
#ifdef CONFIG_PROVE_LOCKING
int prove_locking = 1;
module_param(prove_locking, int, 0644);
void lockdep_init_map(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, int subclass)
{
- if (unlikely(!debug_locks))
+ lock->class_cache = NULL;
+#ifdef CONFIG_LOCK_STAT
+ lock->cpu = raw_smp_processor_id();
+#endif
+
+ if (DEBUG_LOCKS_WARN_ON(!name)) {
+ lock->name = "NULL";
return;
+ }
+
+ lock->name = name;
if (DEBUG_LOCKS_WARN_ON(!key))
return;
- if (DEBUG_LOCKS_WARN_ON(!name))
- return;
/*
* Sanity check, the lock-class key must be persistent:
*/
DEBUG_LOCKS_WARN_ON(1);
return;
}
- lock->name = name;
lock->key = key;
- lock->class_cache = NULL;
-#ifdef CONFIG_LOCK_STAT
- lock->cpu = raw_smp_processor_id();
-#endif
+
+ if (unlikely(!debug_locks))
+ return;
+
if (subclass)
register_lock_class(lock, subclass, 1);
}
}
EXPORT_SYMBOL_GPL(lock_set_class);
-DEFINE_TRACE(lock_acquire);
-
/*
* We are not always called with irqs disabled - do that here,
* and also avoid lockdep recursion:
}
EXPORT_SYMBOL_GPL(lock_acquire);
-DEFINE_TRACE(lock_release);
-
void lock_release(struct lockdep_map *lock, int nested,
unsigned long ip)
{
hlock->holdtime_stamp = now;
}
+ trace_lock_acquired(lock, ip, waittime);
+
stats = get_lock_stats(hlock_class(hlock));
if (waittime) {
if (hlock->read)
lock->ip = ip;
}
-DEFINE_TRACE(lock_contended);
-
void lock_contended(struct lockdep_map *lock, unsigned long ip)
{
unsigned long flags;
}
EXPORT_SYMBOL_GPL(lock_contended);
-DEFINE_TRACE(lock_acquired);
-
void lock_acquired(struct lockdep_map *lock, unsigned long ip)
{
unsigned long flags;
- trace_lock_acquired(lock, ip);
-
if (unlikely(!lock_stat))
return;
*/
#include <linux/module.h>
#include <linux/moduleloader.h>
+#include <linux/ftrace_event.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
#include <linux/fs.h>
/* Free any allocated parameters. */
destroy_params(mod->kp, mod->num_kp);
- /* release any pointers to mcount in this module */
- ftrace_release(mod->module_core, mod->core_size);
-
/* This may be NULL, but that's OK */
module_free(mod, mod->module_init);
kfree(mod->args);
unsigned int symindex = 0;
unsigned int strindex = 0;
unsigned int modindex, versindex, infoindex, pcpuindex;
- unsigned int num_mcount;
struct module *mod;
long err = 0;
void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
- unsigned long *mseg;
mm_segment_t old_fs;
DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
sizeof(*mod->tracepoints),
&mod->num_tracepoints);
#endif
-
+#ifdef CONFIG_EVENT_TRACING
+ mod->trace_events = section_objs(hdr, sechdrs, secstrings,
+ "_ftrace_events",
+ sizeof(*mod->trace_events),
+ &mod->num_trace_events);
+#endif
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+ /* sechdrs[0].sh_size is always zero */
+ mod->ftrace_callsites = section_objs(hdr, sechdrs, secstrings,
+ "__mcount_loc",
+ sizeof(*mod->ftrace_callsites),
+ &mod->num_ftrace_callsites);
+#endif
#ifdef CONFIG_MODVERSIONS
if ((mod->num_syms && !mod->crcs)
|| (mod->num_gpl_syms && !mod->gpl_crcs)
dynamic_debug_setup(debug, num_debug);
}
- /* sechdrs[0].sh_size is always zero */
- mseg = section_objs(hdr, sechdrs, secstrings, "__mcount_loc",
- sizeof(*mseg), &num_mcount);
- ftrace_init_module(mod, mseg, mseg + num_mcount);
-
err = module_finalize(hdr, sechdrs, mod);
if (err < 0)
goto cleanup;
cleanup:
kobject_del(&mod->mkobj.kobj);
kobject_put(&mod->mkobj.kobj);
- ftrace_release(mod->module_core, mod->core_size);
free_unload:
module_unload_free(mod);
#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
* post-warning case.
*/
if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off())
- printk(KERN_WARNING "Disabling lockdep due to kernel taint\n");
+ printk(KERN_WARNING "Disabling lock debugging due to kernel taint\n");
set_bit(flag, &tainted_mask);
}
* timer call will interfere.
*/
list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) {
- int firing;
+ int cpu_firing;
+
spin_lock(&timer->it_lock);
list_del_init(&timer->it.cpu.entry);
- firing = timer->it.cpu.firing;
+ cpu_firing = timer->it.cpu.firing;
timer->it.cpu.firing = 0;
/*
* The firing flag is -1 if we collided with a reset
* of the timer, which already reported this
* almost-firing as an overrun. So don't generate an event.
*/
- if (likely(firing >= 0)) {
+ if (likely(cpu_firing >= 0))
cpu_timer_fire(timer);
- }
spin_unlock(&timer->it_lock);
}
}
if (noresume)
return 0;
- /*
- * We can't depend on SCSI devices being available after loading one of
- * their modules if scsi_complete_async_scans() is not called and the
- * resume device usually is a SCSI one.
- */
- scsi_complete_async_scans();
-
/*
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
* is configured into the kernel. Since the regular hibernate
* here to avoid lockdep complaining.
*/
mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
+
+ if (swsusp_resume_device)
+ goto Check_image;
+
+ if (!strlen(resume_file)) {
+ error = -ENOENT;
+ goto Unlock;
+ }
+
+ pr_debug("PM: Checking image partition %s\n", resume_file);
+
+ /* Check if the device is there */
+ swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
- if (!strlen(resume_file)) {
- mutex_unlock(&pm_mutex);
- return -ENOENT;
- }
/*
* Some device discovery might still be in progress; we need
* to wait for this to finish.
*/
wait_for_device_probe();
+ /*
+ * We can't depend on SCSI devices being available after loading
+ * one of their modules until scsi_complete_async_scans() is
+ * called and the resume device usually is a SCSI one.
+ */
+ scsi_complete_async_scans();
+
swsusp_resume_device = name_to_dev_t(resume_file);
- pr_debug("PM: Resume from partition %s\n", resume_file);
- } else {
- pr_debug("PM: Resume from partition %d:%d\n",
- MAJOR(swsusp_resume_device),
- MINOR(swsusp_resume_device));
+ if (!swsusp_resume_device) {
+ error = -ENODEV;
+ goto Unlock;
+ }
}
- if (noresume) {
- /**
- * FIXME: If noresume is specified, we need to find the
- * partition and reset it back to normal swap space.
- */
- mutex_unlock(&pm_mutex);
- return 0;
- }
+ Check_image:
+ pr_debug("PM: Resume from partition %d:%d\n",
+ MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
pr_debug("PM: Checking hibernation image.\n");
error = swsusp_check();
/* Protect exec's credential calculations against our interference;
* SUID, SGID and LSM creds get determined differently under ptrace.
*/
- retval = mutex_lock_interruptible(¤t->cred_exec_mutex);
+ retval = mutex_lock_interruptible(&task->cred_exec_mutex);
if (retval < 0)
goto out;
bad:
write_unlock_irqrestore(&tasklist_lock, flags);
task_unlock(task);
- mutex_unlock(¤t->cred_exec_mutex);
+ mutex_unlock(&task->cred_exec_mutex);
out:
return retval;
}
#include <linux/debugfs.h>
#include <linux/ctype.h>
#include <linux/ftrace.h>
-#include <trace/sched.h>
#include <asm/tlb.h>
#include <asm/irq_regs.h>
#include "sched_cpupri.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/sched.h>
+
/*
* Convert user-nice values [ -20 ... 0 ... 19 ]
* to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
*/
#define RUNTIME_INF ((u64)~0ULL)
-DEFINE_TRACE(sched_wait_task);
-DEFINE_TRACE(sched_wakeup);
-DEFINE_TRACE(sched_wakeup_new);
-DEFINE_TRACE(sched_switch);
-DEFINE_TRACE(sched_migrate_task);
-
#ifdef CONFIG_SMP
static void double_rq_lock(struct rq *rq1, struct rq *rq2);
clock_offset = old_rq->clock - new_rq->clock;
- trace_sched_migrate_task(p, task_cpu(p), new_cpu);
+ trace_sched_migrate_task(p, new_cpu);
#ifdef CONFIG_SCHEDSTATS
if (p->se.wait_start)
if (user_tick)
account_user_time(p, one_jiffy, one_jiffy_scaled);
- else if (p != rq->idle)
+ else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
account_system_time(p, HARDIRQ_OFFSET, one_jiffy,
one_jiffy_scaled);
else
#include <linux/freezer.h>
#include <linux/pid_namespace.h>
#include <linux/nsproxy.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
#include <asm/param.h>
#include <asm/uaccess.h>
static struct kmem_cache *sigqueue_cachep;
-DEFINE_TRACE(sched_signal_send);
-
static void __user *sig_handler(struct task_struct *t, int sig)
{
return t->sighand->action[sig - 1].sa.sa_handler;
if (slow_work_user_count == 0) {
printk(KERN_NOTICE "Slow work thread pool: Shutting down\n");
slow_work_threads_should_exit = true;
+ del_timer_sync(&slow_work_cull_timer);
+ del_timer_sync(&slow_work_oom_timer);
wake_up_all(&slow_work_thread_wq);
wait_for_completion(&slow_work_last_thread_exited);
printk(KERN_NOTICE "Slow work thread pool:"
" Shut down complete\n");
}
- del_timer_sync(&slow_work_cull_timer);
-
mutex_unlock(&slow_work_user_lock);
}
EXPORT_SYMBOL(slow_work_unregister_user);
#include <linux/ftrace.h>
#include <linux/smp.h>
#include <linux/tick.h>
-#include <trace/irq.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/irq.h>
#include <asm/irq.h>
/*
*/
#define MAX_SOFTIRQ_RESTART 10
-DEFINE_TRACE(softirq_entry);
-DEFINE_TRACE(softirq_exit);
-
asmlinkage void __do_softirq(void)
{
struct softirq_action *h;
static int one_hundred = 100;
static int one_thousand = 1000;
+/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
+
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
static int minolduid;
.mode = 0644,
.proc_handler = &dirty_bytes_handler,
.strategy = &sysctl_intvec,
- .extra1 = &one_ul,
+ .extra1 = &dirty_bytes_min,
},
{
.procname = "dirty_writeback_centisecs",
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
- tick_periodic(cpu);
+ /*
+ * Have to be careful here. If we're in oneshot mode,
+ * before we call tick_periodic() in a loop, we need
+ * to be sure we're using a real hardware clocksource.
+ * Otherwise we could get trapped in an infinite
+ * loop, as the tick_periodic() increments jiffies,
+ * when then will increment time, posibly causing
+ * the loop to trigger again and again.
+ */
+ if (timekeeping_valid_for_hres())
+ tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
depends on HAVE_FTRACE_NMI_ENTER
default y
+config EVENT_TRACING
+ bool
+
config TRACING
bool
select DEBUG_FS
select TRACEPOINTS
select NOP_TRACER
select BINARY_PRINTF
+ select EVENT_TRACING
#
# Minimum requirements an architecture has to meet for us to
if TRACING_SUPPORT
-menu "Tracers"
+menuconfig FTRACE
+ bool "Tracers"
+ help
+ Enable the kernel tracing infrastructure.
+
+if FTRACE
config FUNCTION_TRACER
bool "Kernel Function Tracer"
the return value. This is done by setting the current return
address on the current task structure into a stack of calls.
+
config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
This tracer gets called from the context switch and records
all switching of tasks.
-config EVENT_TRACER
+config ENABLE_EVENT_TRACING
bool "Trace various events in the kernel"
select TRACING
help
allowing the user to pick and choose which trace point they
want to trace.
+ Note, all tracers enable event tracing. This option is
+ only a convenience to enable event tracing when no other
+ tracers are selected.
+
config FTRACE_SYSCALLS
bool "Trace syscalls"
depends on HAVE_FTRACE_SYSCALLS
to enable this on bootup.
config TRACE_BRANCH_PROFILING
- bool "Trace likely/unlikely profiler"
+ bool
select TRACING
+
+choice
+ prompt "Branch Profiling"
+ default BRANCH_PROFILE_NONE
+ help
+ The branch profiling is a software profiler. It will add hooks
+ into the C conditionals to test which path a branch takes.
+
+ The likely/unlikely profiler only looks at the conditions that
+ are annotated with a likely or unlikely macro.
+
+ The "all branch" profiler will profile every if statement in the
+ kernel. This profiler will also enable the likely/unlikely
+ profiler as well.
+
+ Either of the above profilers add a bit of overhead to the system.
+ If unsure choose "No branch profiling".
+
+config BRANCH_PROFILE_NONE
+ bool "No branch profiling"
+ help
+ No branch profiling. Branch profiling adds a bit of overhead.
+ Only enable it if you want to analyse the branching behavior.
+ Otherwise keep it disabled.
+
+config PROFILE_ANNOTATED_BRANCHES
+ bool "Trace likely/unlikely profiler"
+ select TRACE_BRANCH_PROFILING
help
This tracer profiles all the the likely and unlikely macros
in the kernel. It will display the results in:
Note: this will add a significant overhead, only turn this
on if you need to profile the system's use of these macros.
- Say N if unsure.
-
config PROFILE_ALL_BRANCHES
bool "Profile all if conditionals"
- depends on TRACE_BRANCH_PROFILING
+ select TRACE_BRANCH_PROFILING
help
This tracer profiles all branch conditions. Every if ()
taken in the kernel is recorded whether it hit or miss.
/debugfs/tracing/profile_branch
+ This option also enables the likely/unlikely profiler.
+
This configuration, when enabled, will impose a great overhead
on the system. This should only be enabled when the system
is to be analyzed
-
- Say N if unsure.
+endchoice
config TRACING_BRANCHES
bool
were made. If so, it runs stop_machine (stops all CPUS)
and modifies the code to jump over the call to ftrace.
+config FUNCTION_PROFILER
+ bool "Kernel function profiler"
+ depends on FUNCTION_TRACER
+ default n
+ help
+ This option enables the kernel function profiler. A file is created
+ in debugfs called function_profile_enabled which defaults to zero.
+ When a 1 is echoed into this file profiling begins, and when a
+ zero is entered, profiling stops. A file in the trace_stats
+ directory called functions, that show the list of functions that
+ have been hit and their counters.
+
+ If in doubt, say N
+
config FTRACE_MCOUNT_RECORD
def_bool y
depends on DYNAMIC_FTRACE
Say N, unless you absolutely know what you are doing.
-endmenu
+config RING_BUFFER_BENCHMARK
+ tristate "Ring buffer benchmark stress tester"
+ depends on RING_BUFFER
+ help
+ This option creates a test to stress the ring buffer and bench mark it.
+ It creates its own ring buffer such that it will not interfer with
+ any other users of the ring buffer (such as ftrace). It then creates
+ a producer and consumer that will run for 10 seconds and sleep for
+ 10 seconds. Each interval it will print out the number of events
+ it recorded and give a rough estimate of how long each iteration took.
+
+ It does not disable interrupts or raise its priority, so it may be
+ affected by processes that are running.
+
+ If unsure, say N
+
+endif # FTRACE
endif # TRACING_SUPPORT
obj-$(CONFIG_FUNCTION_TRACER) += libftrace.o
obj-$(CONFIG_RING_BUFFER) += ring_buffer.o
+obj-$(CONFIG_RING_BUFFER_BENCHMARK) += ring_buffer_benchmark.o
obj-$(CONFIG_TRACING) += trace.o
obj-$(CONFIG_TRACING) += trace_output.o
obj-$(CONFIG_KMEMTRACE) += kmemtrace.o
obj-$(CONFIG_WORKQUEUE_TRACER) += trace_workqueue.o
obj-$(CONFIG_BLK_DEV_IO_TRACE) += blktrace.o
-obj-$(CONFIG_EVENT_TRACER) += trace_events.o
-obj-$(CONFIG_EVENT_TRACER) += events.o
-obj-$(CONFIG_EVENT_TRACER) += trace_export.o
+obj-$(CONFIG_EVENT_TRACING) += trace_events.o
+obj-$(CONFIG_EVENT_TRACING) += trace_export.o
obj-$(CONFIG_FTRACE_SYSCALLS) += trace_syscalls.o
obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o
-obj-$(CONFIG_EVENT_TRACER) += trace_events_filter.o
+obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
libftrace-y := ftrace.o
{
if (((bt->act_mask << BLK_TC_SHIFT) & what) == 0)
return 1;
- if (sector < bt->start_lba || sector > bt->end_lba)
+ if (sector && (sector < bt->start_lba || sector > bt->end_lba))
return 1;
if (bt->pid && pid != bt->pid)
return 1;
what |= MASK_TC_BIT(rw, DISCARD);
pid = tsk->pid;
- if (unlikely(act_log_check(bt, what, sector, pid)))
+ if (act_log_check(bt, what, sector, pid))
return;
cpu = raw_smp_processor_id();
.remove_buf_file = blk_remove_buf_file_callback,
};
+static void blk_trace_setup_lba(struct blk_trace *bt,
+ struct block_device *bdev)
+{
+ struct hd_struct *part = NULL;
+
+ if (bdev)
+ part = bdev->bd_part;
+
+ if (part) {
+ bt->start_lba = part->start_sect;
+ bt->end_lba = part->start_sect + part->nr_sects;
+ } else {
+ bt->start_lba = 0;
+ bt->end_lba = -1ULL;
+ }
+}
+
/*
* Setup everything required to start tracing
*/
int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
- struct blk_user_trace_setup *buts)
+ struct block_device *bdev,
+ struct blk_user_trace_setup *buts)
{
struct blk_trace *old_bt, *bt = NULL;
struct dentry *dir = NULL;
if (!bt->act_mask)
bt->act_mask = (u16) -1;
- bt->start_lba = buts->start_lba;
- bt->end_lba = buts->end_lba;
- if (!bt->end_lba)
- bt->end_lba = -1ULL;
+ blk_trace_setup_lba(bt, bdev);
+
+ /* overwrite with user settings */
+ if (buts->start_lba)
+ bt->start_lba = buts->start_lba;
+ if (buts->end_lba)
+ bt->end_lba = buts->end_lba;
bt->pid = buts->pid;
bt->trace_state = Blktrace_setup;
}
int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+ struct block_device *bdev,
char __user *arg)
{
struct blk_user_trace_setup buts;
if (ret)
return -EFAULT;
- ret = do_blk_trace_setup(q, name, dev, &buts);
+ ret = do_blk_trace_setup(q, name, dev, bdev, &buts);
if (ret)
return ret;
switch (cmd) {
case BLKTRACESETUP:
bdevname(bdev, b);
- ret = blk_trace_setup(q, b, bdev->bd_dev, arg);
+ ret = blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
break;
case BLKTRACESTART:
start = 1;
* @bio: the source bio
* @dev: target device
* @from: source sector
- * @to: target sector
*
* Description:
* Device mapper or raid target sometimes need to split a bio because
*
**/
static void blk_add_trace_remap(struct request_queue *q, struct bio *bio,
- dev_t dev, sector_t from, sector_t to)
+ dev_t dev, sector_t from)
{
struct blk_trace *bt = q->blk_trace;
struct blk_io_trace_remap r;
if (likely(!bt))
return;
- r.device = cpu_to_be32(dev);
- r.device_from = cpu_to_be32(bio->bi_bdev->bd_dev);
- r.sector = cpu_to_be64(to);
+ r.device_from = cpu_to_be32(dev);
+ r.device_to = cpu_to_be32(bio->bi_bdev->bd_dev);
+ r.sector_from = cpu_to_be64(from);
- __blk_add_trace(bt, from, bio->bi_size, bio->bi_rw, BLK_TA_REMAP,
- !bio_flagged(bio, BIO_UPTODATE), sizeof(r), &r);
+ __blk_add_trace(bt, bio->bi_sector, bio->bi_size, bio->bi_rw,
+ BLK_TA_REMAP, !bio_flagged(bio, BIO_UPTODATE),
+ sizeof(r), &r);
}
/**
return te_blk_io_trace(ent) + 1;
}
+static inline u32 t_action(const struct trace_entry *ent)
+{
+ return te_blk_io_trace(ent)->action;
+}
+
+static inline u32 t_bytes(const struct trace_entry *ent)
+{
+ return te_blk_io_trace(ent)->bytes;
+}
+
static inline u32 t_sec(const struct trace_entry *ent)
{
return te_blk_io_trace(ent)->bytes >> 9;
struct blk_io_trace_remap *r)
{
const struct blk_io_trace_remap *__r = pdu_start(ent);
- __u64 sector = __r->sector;
+ __u64 sector_from = __r->sector_from;
- r->device = be32_to_cpu(__r->device);
r->device_from = be32_to_cpu(__r->device_from);
- r->sector = be64_to_cpu(sector);
+ r->device_to = be32_to_cpu(__r->device_to);
+ r->sector_from = be64_to_cpu(sector_from);
}
typedef int (blk_log_action_t) (struct trace_iterator *iter, const char *act);
MAJOR(t->device), MINOR(t->device), act, rwbs);
}
+static int blk_log_dump_pdu(struct trace_seq *s, const struct trace_entry *ent)
+{
+ const char *pdu_buf;
+ int pdu_len;
+ int i, end, ret;
+
+ pdu_buf = pdu_start(ent);
+ pdu_len = te_blk_io_trace(ent)->pdu_len;
+
+ if (!pdu_len)
+ return 1;
+
+ /* find the last zero that needs to be printed */
+ for (end = pdu_len - 1; end >= 0; end--)
+ if (pdu_buf[end])
+ break;
+ end++;
+
+ if (!trace_seq_putc(s, '('))
+ return 0;
+
+ for (i = 0; i < pdu_len; i++) {
+
+ ret = trace_seq_printf(s, "%s%02x",
+ i == 0 ? "" : " ", pdu_buf[i]);
+ if (!ret)
+ return ret;
+
+ /*
+ * stop when the rest is just zeroes and indicate so
+ * with a ".." appended
+ */
+ if (i == end && end != pdu_len - 1)
+ return trace_seq_puts(s, " ..) ");
+ }
+
+ return trace_seq_puts(s, ") ");
+}
+
static int blk_log_generic(struct trace_seq *s, const struct trace_entry *ent)
{
char cmd[TASK_COMM_LEN];
trace_find_cmdline(ent->pid, cmd);
- if (t_sec(ent))
- return trace_seq_printf(s, "%llu + %u [%s]\n",
- t_sector(ent), t_sec(ent), cmd);
- return trace_seq_printf(s, "[%s]\n", cmd);
+ if (t_action(ent) & BLK_TC_ACT(BLK_TC_PC)) {
+ int ret;
+
+ ret = trace_seq_printf(s, "%u ", t_bytes(ent));
+ if (!ret)
+ return 0;
+ ret = blk_log_dump_pdu(s, ent);
+ if (!ret)
+ return 0;
+ return trace_seq_printf(s, "[%s]\n", cmd);
+ } else {
+ if (t_sec(ent))
+ return trace_seq_printf(s, "%llu + %u [%s]\n",
+ t_sector(ent), t_sec(ent), cmd);
+ return trace_seq_printf(s, "[%s]\n", cmd);
+ }
}
static int blk_log_with_error(struct trace_seq *s,
const struct trace_entry *ent)
{
- if (t_sec(ent))
- return trace_seq_printf(s, "%llu + %u [%d]\n", t_sector(ent),
- t_sec(ent), t_error(ent));
- return trace_seq_printf(s, "%llu [%d]\n", t_sector(ent), t_error(ent));
+ if (t_action(ent) & BLK_TC_ACT(BLK_TC_PC)) {
+ int ret;
+
+ ret = blk_log_dump_pdu(s, ent);
+ if (ret)
+ return trace_seq_printf(s, "[%d]\n", t_error(ent));
+ return 0;
+ } else {
+ if (t_sec(ent))
+ return trace_seq_printf(s, "%llu + %u [%d]\n",
+ t_sector(ent),
+ t_sec(ent), t_error(ent));
+ return trace_seq_printf(s, "%llu [%d]\n",
+ t_sector(ent), t_error(ent));
+ }
}
static int blk_log_remap(struct trace_seq *s, const struct trace_entry *ent)
{
- struct blk_io_trace_remap r = { .device = 0, };
+ struct blk_io_trace_remap r = { .device_from = 0, };
get_pdu_remap(ent, &r);
return trace_seq_printf(s, "%llu + %u <- (%d,%d) %llu\n",
- t_sector(ent),
- t_sec(ent), MAJOR(r.device), MINOR(r.device),
- (unsigned long long)r.sector);
+ t_sector(ent), t_sec(ent),
+ MAJOR(r.device_from), MINOR(r.device_from),
+ (unsigned long long)r.sector_from);
}
static int blk_log_plug(struct trace_seq *s, const struct trace_entry *ent)
static void blk_tracer_start(struct trace_array *tr)
{
blk_tracer_enabled = true;
- trace_flags &= ~TRACE_ITER_CONTEXT_INFO;
}
static int blk_tracer_init(struct trace_array *tr)
static void blk_tracer_stop(struct trace_array *tr)
{
blk_tracer_enabled = false;
- trace_flags |= TRACE_ITER_CONTEXT_INFO;
}
static void blk_tracer_reset(struct trace_array *tr)
}
if (unlikely(what == 0 || what >= ARRAY_SIZE(what2act)))
- ret = trace_seq_printf(s, "Bad pc action %x\n", what);
+ ret = trace_seq_printf(s, "Unknown action %x\n", what);
else {
ret = log_action(iter, what2act[what].act[long_act]);
if (ret)
static enum print_line_t blk_trace_event_print(struct trace_iterator *iter,
int flags)
{
- if (!trace_print_context(iter))
- return TRACE_TYPE_PARTIAL_LINE;
-
return print_one_line(iter, false);
}
return print_one_line(iter, true);
}
+static int blk_tracer_set_flag(u32 old_flags, u32 bit, int set)
+{
+ /* don't output context-info for blk_classic output */
+ if (bit == TRACE_BLK_OPT_CLASSIC) {
+ if (set)
+ trace_flags &= ~TRACE_ITER_CONTEXT_INFO;
+ else
+ trace_flags |= TRACE_ITER_CONTEXT_INFO;
+ }
+ return 0;
+}
+
static struct tracer blk_tracer __read_mostly = {
.name = "blk",
.init = blk_tracer_init,
.print_header = blk_tracer_print_header,
.print_line = blk_tracer_print_line,
.flags = &blk_tracer_flags,
+ .set_flag = blk_tracer_set_flag,
};
static struct trace_event trace_blk_event = {
/*
* Setup everything required to start tracing
*/
-static int blk_trace_setup_queue(struct request_queue *q, dev_t dev)
+static int blk_trace_setup_queue(struct request_queue *q,
+ struct block_device *bdev)
{
struct blk_trace *old_bt, *bt = NULL;
int ret = -ENOMEM;
if (!bt->msg_data)
goto free_bt;
- bt->dev = dev;
+ bt->dev = bdev->bd_dev;
bt->act_mask = (u16)-1;
- bt->end_lba = -1ULL;
+
+ blk_trace_setup_lba(bt, bdev);
old_bt = xchg(&q->blk_trace, bt);
if (old_bt != NULL) {
if (attr == &dev_attr_enable) {
if (value)
- ret = blk_trace_setup_queue(q, bdev->bd_dev);
+ ret = blk_trace_setup_queue(q, bdev);
else
ret = blk_trace_remove_queue(q);
goto out_unlock_bdev;
ret = 0;
if (q->blk_trace == NULL)
- ret = blk_trace_setup_queue(q, bdev->bd_dev);
+ ret = blk_trace_setup_queue(q, bdev);
if (ret == 0) {
if (attr == &dev_attr_act_mask)
return ret ? ret : count;
}
+int blk_trace_init_sysfs(struct device *dev)
+{
+ return sysfs_create_group(&dev->kobj, &blk_trace_attr_group);
+}
+
+++ /dev/null
-/*
- * This is the place to register all trace points as events.
- */
-
-#include <linux/stringify.h>
-
-#include <trace/trace_events.h>
-
-#include "trace_output.h"
-
-#include "trace_events_stage_1.h"
-#include "trace_events_stage_2.h"
-#include "trace_events_stage_3.h"
-
#include <linux/list.h>
#include <linux/hash.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
#include <asm/ftrace.h>
-#include "trace.h"
+#include "trace_output.h"
+#include "trace_stat.h"
#define FTRACE_WARN_ON(cond) \
do { \
static struct ftrace_ops ftrace_list_end __read_mostly =
{
- .func = ftrace_stub,
+ .func = ftrace_stub,
};
static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end;
#endif
}
+#ifdef CONFIG_FUNCTION_PROFILER
+struct ftrace_profile {
+ struct hlist_node node;
+ unsigned long ip;
+ unsigned long counter;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ unsigned long long time;
+#endif
+};
+
+struct ftrace_profile_page {
+ struct ftrace_profile_page *next;
+ unsigned long index;
+ struct ftrace_profile records[];
+};
+
+struct ftrace_profile_stat {
+ atomic_t disabled;
+ struct hlist_head *hash;
+ struct ftrace_profile_page *pages;
+ struct ftrace_profile_page *start;
+ struct tracer_stat stat;
+};
+
+#define PROFILE_RECORDS_SIZE \
+ (PAGE_SIZE - offsetof(struct ftrace_profile_page, records))
+
+#define PROFILES_PER_PAGE \
+ (PROFILE_RECORDS_SIZE / sizeof(struct ftrace_profile))
+
+static int ftrace_profile_bits __read_mostly;
+static int ftrace_profile_enabled __read_mostly;
+
+/* ftrace_profile_lock - synchronize the enable and disable of the profiler */
+static DEFINE_MUTEX(ftrace_profile_lock);
+
+static DEFINE_PER_CPU(struct ftrace_profile_stat, ftrace_profile_stats);
+
+#define FTRACE_PROFILE_HASH_SIZE 1024 /* must be power of 2 */
+
+static void *
+function_stat_next(void *v, int idx)
+{
+ struct ftrace_profile *rec = v;
+ struct ftrace_profile_page *pg;
+
+ pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK);
+
+ again:
+ rec++;
+ if ((void *)rec >= (void *)&pg->records[pg->index]) {
+ pg = pg->next;
+ if (!pg)
+ return NULL;
+ rec = &pg->records[0];
+ if (!rec->counter)
+ goto again;
+ }
+
+ return rec;
+}
+
+static void *function_stat_start(struct tracer_stat *trace)
+{
+ struct ftrace_profile_stat *stat =
+ container_of(trace, struct ftrace_profile_stat, stat);
+
+ if (!stat || !stat->start)
+ return NULL;
+
+ return function_stat_next(&stat->start->records[0], 0);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* function graph compares on total time */
+static int function_stat_cmp(void *p1, void *p2)
+{
+ struct ftrace_profile *a = p1;
+ struct ftrace_profile *b = p2;
+
+ if (a->time < b->time)
+ return -1;
+ if (a->time > b->time)
+ return 1;
+ else
+ return 0;
+}
+#else
+/* not function graph compares against hits */
+static int function_stat_cmp(void *p1, void *p2)
+{
+ struct ftrace_profile *a = p1;
+ struct ftrace_profile *b = p2;
+
+ if (a->counter < b->counter)
+ return -1;
+ if (a->counter > b->counter)
+ return 1;
+ else
+ return 0;
+}
+#endif
+
+static int function_stat_headers(struct seq_file *m)
+{
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ seq_printf(m, " Function "
+ "Hit Time Avg\n"
+ " -------- "
+ "--- ---- ---\n");
+#else
+ seq_printf(m, " Function Hit\n"
+ " -------- ---\n");
+#endif
+ return 0;
+}
+
+static int function_stat_show(struct seq_file *m, void *v)
+{
+ struct ftrace_profile *rec = v;
+ char str[KSYM_SYMBOL_LEN];
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ static DEFINE_MUTEX(mutex);
+ static struct trace_seq s;
+ unsigned long long avg;
+#endif
+
+ kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
+ seq_printf(m, " %-30.30s %10lu", str, rec->counter);
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ seq_printf(m, " ");
+ avg = rec->time;
+ do_div(avg, rec->counter);
+
+ mutex_lock(&mutex);
+ trace_seq_init(&s);
+ trace_print_graph_duration(rec->time, &s);
+ trace_seq_puts(&s, " ");
+ trace_print_graph_duration(avg, &s);
+ trace_print_seq(m, &s);
+ mutex_unlock(&mutex);
+#endif
+ seq_putc(m, '\n');
+
+ return 0;
+}
+
+static void ftrace_profile_reset(struct ftrace_profile_stat *stat)
+{
+ struct ftrace_profile_page *pg;
+
+ pg = stat->pages = stat->start;
+
+ while (pg) {
+ memset(pg->records, 0, PROFILE_RECORDS_SIZE);
+ pg->index = 0;
+ pg = pg->next;
+ }
+
+ memset(stat->hash, 0,
+ FTRACE_PROFILE_HASH_SIZE * sizeof(struct hlist_head));
+}
+
+int ftrace_profile_pages_init(struct ftrace_profile_stat *stat)
+{
+ struct ftrace_profile_page *pg;
+ int functions;
+ int pages;
+ int i;
+
+ /* If we already allocated, do nothing */
+ if (stat->pages)
+ return 0;
+
+ stat->pages = (void *)get_zeroed_page(GFP_KERNEL);
+ if (!stat->pages)
+ return -ENOMEM;
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+ functions = ftrace_update_tot_cnt;
+#else
+ /*
+ * We do not know the number of functions that exist because
+ * dynamic tracing is what counts them. With past experience
+ * we have around 20K functions. That should be more than enough.
+ * It is highly unlikely we will execute every function in
+ * the kernel.
+ */
+ functions = 20000;
+#endif
+
+ pg = stat->start = stat->pages;
+
+ pages = DIV_ROUND_UP(functions, PROFILES_PER_PAGE);
+
+ for (i = 0; i < pages; i++) {
+ pg->next = (void *)get_zeroed_page(GFP_KERNEL);
+ if (!pg->next)
+ goto out_free;
+ pg = pg->next;
+ }
+
+ return 0;
+
+ out_free:
+ pg = stat->start;
+ while (pg) {
+ unsigned long tmp = (unsigned long)pg;
+
+ pg = pg->next;
+ free_page(tmp);
+ }
+
+ free_page((unsigned long)stat->pages);
+ stat->pages = NULL;
+ stat->start = NULL;
+
+ return -ENOMEM;
+}
+
+static int ftrace_profile_init_cpu(int cpu)
+{
+ struct ftrace_profile_stat *stat;
+ int size;
+
+ stat = &per_cpu(ftrace_profile_stats, cpu);
+
+ if (stat->hash) {
+ /* If the profile is already created, simply reset it */
+ ftrace_profile_reset(stat);
+ return 0;
+ }
+
+ /*
+ * We are profiling all functions, but usually only a few thousand
+ * functions are hit. We'll make a hash of 1024 items.
+ */
+ size = FTRACE_PROFILE_HASH_SIZE;
+
+ stat->hash = kzalloc(sizeof(struct hlist_head) * size, GFP_KERNEL);
+
+ if (!stat->hash)
+ return -ENOMEM;
+
+ if (!ftrace_profile_bits) {
+ size--;
+
+ for (; size; size >>= 1)
+ ftrace_profile_bits++;
+ }
+
+ /* Preallocate the function profiling pages */
+ if (ftrace_profile_pages_init(stat) < 0) {
+ kfree(stat->hash);
+ stat->hash = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int ftrace_profile_init(void)
+{
+ int cpu;
+ int ret = 0;
+
+ for_each_online_cpu(cpu) {
+ ret = ftrace_profile_init_cpu(cpu);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/* interrupts must be disabled */
+static struct ftrace_profile *
+ftrace_find_profiled_func(struct ftrace_profile_stat *stat, unsigned long ip)
+{
+ struct ftrace_profile *rec;
+ struct hlist_head *hhd;
+ struct hlist_node *n;
+ unsigned long key;
+
+ key = hash_long(ip, ftrace_profile_bits);
+ hhd = &stat->hash[key];
+
+ if (hlist_empty(hhd))
+ return NULL;
+
+ hlist_for_each_entry_rcu(rec, n, hhd, node) {
+ if (rec->ip == ip)
+ return rec;
+ }
+
+ return NULL;
+}
+
+static void ftrace_add_profile(struct ftrace_profile_stat *stat,
+ struct ftrace_profile *rec)
+{
+ unsigned long key;
+
+ key = hash_long(rec->ip, ftrace_profile_bits);
+ hlist_add_head_rcu(&rec->node, &stat->hash[key]);
+}
+
+/*
+ * The memory is already allocated, this simply finds a new record to use.
+ */
+static struct ftrace_profile *
+ftrace_profile_alloc(struct ftrace_profile_stat *stat, unsigned long ip)
+{
+ struct ftrace_profile *rec = NULL;
+
+ /* prevent recursion (from NMIs) */
+ if (atomic_inc_return(&stat->disabled) != 1)
+ goto out;
+
+ /*
+ * Try to find the function again since an NMI
+ * could have added it
+ */
+ rec = ftrace_find_profiled_func(stat, ip);
+ if (rec)
+ goto out;
+
+ if (stat->pages->index == PROFILES_PER_PAGE) {
+ if (!stat->pages->next)
+ goto out;
+ stat->pages = stat->pages->next;
+ }
+
+ rec = &stat->pages->records[stat->pages->index++];
+ rec->ip = ip;
+ ftrace_add_profile(stat, rec);
+
+ out:
+ atomic_dec(&stat->disabled);
+
+ return rec;
+}
+
+static void
+function_profile_call(unsigned long ip, unsigned long parent_ip)
+{
+ struct ftrace_profile_stat *stat;
+ struct ftrace_profile *rec;
+ unsigned long flags;
+
+ if (!ftrace_profile_enabled)
+ return;
+
+ local_irq_save(flags);
+
+ stat = &__get_cpu_var(ftrace_profile_stats);
+ if (!stat->hash)
+ goto out;
+
+ rec = ftrace_find_profiled_func(stat, ip);
+ if (!rec) {
+ rec = ftrace_profile_alloc(stat, ip);
+ if (!rec)
+ goto out;
+ }
+
+ rec->counter++;
+ out:
+ local_irq_restore(flags);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static int profile_graph_entry(struct ftrace_graph_ent *trace)
+{
+ function_profile_call(trace->func, 0);
+ return 1;
+}
+
+static void profile_graph_return(struct ftrace_graph_ret *trace)
+{
+ struct ftrace_profile_stat *stat;
+ unsigned long long calltime;
+ struct ftrace_profile *rec;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ stat = &__get_cpu_var(ftrace_profile_stats);
+ if (!stat->hash)
+ goto out;
+
+ calltime = trace->rettime - trace->calltime;
+
+ if (!(trace_flags & TRACE_ITER_GRAPH_TIME)) {
+ int index;
+
+ index = trace->depth;
+
+ /* Append this call time to the parent time to subtract */
+ if (index)
+ current->ret_stack[index - 1].subtime += calltime;
+
+ if (current->ret_stack[index].subtime < calltime)
+ calltime -= current->ret_stack[index].subtime;
+ else
+ calltime = 0;
+ }
+
+ rec = ftrace_find_profiled_func(stat, trace->func);
+ if (rec)
+ rec->time += calltime;
+
+ out:
+ local_irq_restore(flags);
+}
+
+static int register_ftrace_profiler(void)
+{
+ return register_ftrace_graph(&profile_graph_return,
+ &profile_graph_entry);
+}
+
+static void unregister_ftrace_profiler(void)
+{
+ unregister_ftrace_graph();
+}
+#else
+static struct ftrace_ops ftrace_profile_ops __read_mostly =
+{
+ .func = function_profile_call,
+};
+
+static int register_ftrace_profiler(void)
+{
+ return register_ftrace_function(&ftrace_profile_ops);
+}
+
+static void unregister_ftrace_profiler(void)
+{
+ unregister_ftrace_function(&ftrace_profile_ops);
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+static ssize_t
+ftrace_profile_write(struct file *filp, const char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ unsigned long val;
+ char buf[64]; /* big enough to hold a number */
+ int ret;
+
+ if (cnt >= sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, cnt))
+ return -EFAULT;
+
+ buf[cnt] = 0;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ val = !!val;
+
+ mutex_lock(&ftrace_profile_lock);
+ if (ftrace_profile_enabled ^ val) {
+ if (val) {
+ ret = ftrace_profile_init();
+ if (ret < 0) {
+ cnt = ret;
+ goto out;
+ }
+
+ ret = register_ftrace_profiler();
+ if (ret < 0) {
+ cnt = ret;
+ goto out;
+ }
+ ftrace_profile_enabled = 1;
+ } else {
+ ftrace_profile_enabled = 0;
+ unregister_ftrace_profiler();
+ }
+ }
+ out:
+ mutex_unlock(&ftrace_profile_lock);
+
+ filp->f_pos += cnt;
+
+ return cnt;
+}
+
+static ssize_t
+ftrace_profile_read(struct file *filp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ char buf[64]; /* big enough to hold a number */
+ int r;
+
+ r = sprintf(buf, "%u\n", ftrace_profile_enabled);
+ return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
+}
+
+static const struct file_operations ftrace_profile_fops = {
+ .open = tracing_open_generic,
+ .read = ftrace_profile_read,
+ .write = ftrace_profile_write,
+};
+
+/* used to initialize the real stat files */
+static struct tracer_stat function_stats __initdata = {
+ .name = "functions",
+ .stat_start = function_stat_start,
+ .stat_next = function_stat_next,
+ .stat_cmp = function_stat_cmp,
+ .stat_headers = function_stat_headers,
+ .stat_show = function_stat_show
+};
+
+static void ftrace_profile_debugfs(struct dentry *d_tracer)
+{
+ struct ftrace_profile_stat *stat;
+ struct dentry *entry;
+ char *name;
+ int ret;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ stat = &per_cpu(ftrace_profile_stats, cpu);
+
+ /* allocate enough for function name + cpu number */
+ name = kmalloc(32, GFP_KERNEL);
+ if (!name) {
+ /*
+ * The files created are permanent, if something happens
+ * we still do not free memory.
+ */
+ kfree(stat);
+ WARN(1,
+ "Could not allocate stat file for cpu %d\n",
+ cpu);
+ return;
+ }
+ stat->stat = function_stats;
+ snprintf(name, 32, "function%d", cpu);
+ stat->stat.name = name;
+ ret = register_stat_tracer(&stat->stat);
+ if (ret) {
+ WARN(1,
+ "Could not register function stat for cpu %d\n",
+ cpu);
+ kfree(name);
+ return;
+ }
+ }
+
+ entry = debugfs_create_file("function_profile_enabled", 0644,
+ d_tracer, NULL, &ftrace_profile_fops);
+ if (!entry)
+ pr_warning("Could not create debugfs "
+ "'function_profile_enabled' entry\n");
+}
+
+#else /* CONFIG_FUNCTION_PROFILER */
+static void ftrace_profile_debugfs(struct dentry *d_tracer)
+{
+}
+#endif /* CONFIG_FUNCTION_PROFILER */
+
/* set when tracing only a pid */
struct pid *ftrace_pid_trace;
static struct pid * const ftrace_swapper_pid = &init_struct_pid;
struct rcu_head rcu;
};
-
enum {
FTRACE_ENABLE_CALLS = (1 << 0),
FTRACE_DISABLE_CALLS = (1 << 1),
rec->flags |= FTRACE_FL_FREE;
}
-void ftrace_release(void *start, unsigned long size)
-{
- struct dyn_ftrace *rec;
- struct ftrace_page *pg;
- unsigned long s = (unsigned long)start;
- unsigned long e = s + size;
-
- if (ftrace_disabled || !start)
- return;
-
- mutex_lock(&ftrace_lock);
- do_for_each_ftrace_rec(pg, rec) {
- if ((rec->ip >= s) && (rec->ip < e)) {
- /*
- * rec->ip is changed in ftrace_free_rec()
- * It should not between s and e if record was freed.
- */
- FTRACE_WARN_ON(rec->flags & FTRACE_FL_FREE);
- ftrace_free_rec(rec);
- }
- } while_for_each_ftrace_rec();
- mutex_unlock(&ftrace_lock);
-}
-
static struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip)
{
struct dyn_ftrace *rec;
static struct ftrace_ops trace_probe_ops __read_mostly =
{
- .func = function_trace_probe_call,
+ .func = function_trace_probe_call,
};
static int ftrace_probe_registered;
static __init int ftrace_init_dyn_debugfs(struct dentry *d_tracer)
{
- struct dentry *entry;
- entry = debugfs_create_file("available_filter_functions", 0444,
- d_tracer, NULL, &ftrace_avail_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'available_filter_functions' entry\n");
+ trace_create_file("available_filter_functions", 0444,
+ d_tracer, NULL, &ftrace_avail_fops);
- entry = debugfs_create_file("failures", 0444,
- d_tracer, NULL, &ftrace_failures_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'failures' entry\n");
+ trace_create_file("failures", 0444,
+ d_tracer, NULL, &ftrace_failures_fops);
- entry = debugfs_create_file("set_ftrace_filter", 0644, d_tracer,
- NULL, &ftrace_filter_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'set_ftrace_filter' entry\n");
+ trace_create_file("set_ftrace_filter", 0644, d_tracer,
+ NULL, &ftrace_filter_fops);
- entry = debugfs_create_file("set_ftrace_notrace", 0644, d_tracer,
+ trace_create_file("set_ftrace_notrace", 0644, d_tracer,
NULL, &ftrace_notrace_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'set_ftrace_notrace' entry\n");
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- entry = debugfs_create_file("set_graph_function", 0444, d_tracer,
+ trace_create_file("set_graph_function", 0444, d_tracer,
NULL,
&ftrace_graph_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'set_graph_function' entry\n");
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
return 0;
return 0;
}
-void ftrace_init_module(struct module *mod,
- unsigned long *start, unsigned long *end)
+#ifdef CONFIG_MODULES
+void ftrace_release(void *start, void *end)
+{
+ struct dyn_ftrace *rec;
+ struct ftrace_page *pg;
+ unsigned long s = (unsigned long)start;
+ unsigned long e = (unsigned long)end;
+
+ if (ftrace_disabled || !start || start == end)
+ return;
+
+ mutex_lock(&ftrace_lock);
+ do_for_each_ftrace_rec(pg, rec) {
+ if ((rec->ip >= s) && (rec->ip < e)) {
+ /*
+ * rec->ip is changed in ftrace_free_rec()
+ * It should not between s and e if record was freed.
+ */
+ FTRACE_WARN_ON(rec->flags & FTRACE_FL_FREE);
+ ftrace_free_rec(rec);
+ }
+ } while_for_each_ftrace_rec();
+ mutex_unlock(&ftrace_lock);
+}
+
+static void ftrace_init_module(struct module *mod,
+ unsigned long *start, unsigned long *end)
{
if (ftrace_disabled || start == end)
return;
ftrace_convert_nops(mod, start, end);
}
+static int ftrace_module_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct module *mod = data;
+
+ switch (val) {
+ case MODULE_STATE_COMING:
+ ftrace_init_module(mod, mod->ftrace_callsites,
+ mod->ftrace_callsites +
+ mod->num_ftrace_callsites);
+ break;
+ case MODULE_STATE_GOING:
+ ftrace_release(mod->ftrace_callsites,
+ mod->ftrace_callsites +
+ mod->num_ftrace_callsites);
+ break;
+ }
+
+ return 0;
+}
+#else
+static int ftrace_module_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ return 0;
+}
+#endif /* CONFIG_MODULES */
+
+struct notifier_block ftrace_module_nb = {
+ .notifier_call = ftrace_module_notify,
+ .priority = 0,
+};
+
extern unsigned long __start_mcount_loc[];
extern unsigned long __stop_mcount_loc[];
__start_mcount_loc,
__stop_mcount_loc);
+ ret = register_module_notifier(&ftrace_module_nb);
+ if (!ret)
+ pr_warning("Failed to register trace ftrace module notifier\n");
+
return;
failed:
ftrace_disabled = 1;
static __init int ftrace_init_debugfs(void)
{
struct dentry *d_tracer;
- struct dentry *entry;
d_tracer = tracing_init_dentry();
if (!d_tracer)
ftrace_init_dyn_debugfs(d_tracer);
- entry = debugfs_create_file("set_ftrace_pid", 0644, d_tracer,
- NULL, &ftrace_pid_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'set_ftrace_pid' entry\n");
+ trace_create_file("set_ftrace_pid", 0644, d_tracer,
+ NULL, &ftrace_pid_fops);
+
+ ftrace_profile_debugfs(d_tracer);
+
return 0;
}
fs_initcall(ftrace_init_debugfs);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static atomic_t ftrace_graph_active;
+static int ftrace_graph_active;
static struct notifier_block ftrace_suspend_notifier;
int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
mutex_lock(&ftrace_lock);
/* we currently allow only one tracer registered at a time */
- if (atomic_read(&ftrace_graph_active)) {
+ if (ftrace_graph_active) {
ret = -EBUSY;
goto out;
}
ftrace_suspend_notifier.notifier_call = ftrace_suspend_notifier_call;
register_pm_notifier(&ftrace_suspend_notifier);
- atomic_inc(&ftrace_graph_active);
+ ftrace_graph_active++;
ret = start_graph_tracing();
if (ret) {
- atomic_dec(&ftrace_graph_active);
+ ftrace_graph_active--;
goto out;
}
{
mutex_lock(&ftrace_lock);
- if (!unlikely(atomic_read(&ftrace_graph_active)))
+ if (unlikely(!ftrace_graph_active))
goto out;
- atomic_dec(&ftrace_graph_active);
+ ftrace_graph_active--;
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch);
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
/* Allocate a return stack for newly created task */
void ftrace_graph_init_task(struct task_struct *t)
{
- if (atomic_read(&ftrace_graph_active)) {
+ if (ftrace_graph_active) {
t->ret_stack = kmalloc(FTRACE_RETFUNC_DEPTH
* sizeof(struct ftrace_ret_stack),
GFP_KERNEL);
#include <linux/dcache.h>
#include <linux/fs.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
#include "trace_output.h"
#include "trace.h"
gfp_t gfp_flags,
int node)
{
+ struct ftrace_event_call *call = &event_kmem_alloc;
struct trace_array *tr = kmemtrace_array;
struct kmemtrace_alloc_entry *entry;
struct ring_buffer_event *event;
entry->gfp_flags = gfp_flags;
entry->node = node;
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
trace_wake_up();
}
unsigned long call_site,
const void *ptr)
{
+ struct ftrace_event_call *call = &event_kmem_free;
struct trace_array *tr = kmemtrace_array;
struct kmemtrace_free_entry *entry;
struct ring_buffer_event *event;
entry->call_site = call_site;
entry->ptr = ptr;
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
trace_wake_up();
}
#include "trace.h"
+/*
+ * The ring buffer header is special. We must manually up keep it.
+ */
+int ring_buffer_print_entry_header(struct trace_seq *s)
+{
+ int ret;
+
+ ret = trace_seq_printf(s, "# compressed entry header\n");
+ ret = trace_seq_printf(s, "\ttype_len : 5 bits\n");
+ ret = trace_seq_printf(s, "\ttime_delta : 27 bits\n");
+ ret = trace_seq_printf(s, "\tarray : 32 bits\n");
+ ret = trace_seq_printf(s, "\n");
+ ret = trace_seq_printf(s, "\tpadding : type == %d\n",
+ RINGBUF_TYPE_PADDING);
+ ret = trace_seq_printf(s, "\ttime_extend : type == %d\n",
+ RINGBUF_TYPE_TIME_EXTEND);
+ ret = trace_seq_printf(s, "\tdata max type_len == %d\n",
+ RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
+
+ return ret;
+}
+
/*
* The ring buffer is made up of a list of pages. A separate list of pages is
* allocated for each CPU. A writer may only write to a buffer that is
#define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array))
#define RB_ALIGNMENT 4U
-#define RB_MAX_SMALL_DATA 28
+#define RB_MAX_SMALL_DATA (RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
+
+/* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */
+#define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX
enum {
RB_LEN_TIME_EXTEND = 8,
static inline int rb_null_event(struct ring_buffer_event *event)
{
- return event->type == RINGBUF_TYPE_PADDING && event->time_delta == 0;
+ return event->type_len == RINGBUF_TYPE_PADDING
+ && event->time_delta == 0;
}
static inline int rb_discarded_event(struct ring_buffer_event *event)
{
- return event->type == RINGBUF_TYPE_PADDING && event->time_delta;
+ return event->type_len == RINGBUF_TYPE_PADDING && event->time_delta;
}
static void rb_event_set_padding(struct ring_buffer_event *event)
{
- event->type = RINGBUF_TYPE_PADDING;
+ event->type_len = RINGBUF_TYPE_PADDING;
event->time_delta = 0;
}
-/**
- * ring_buffer_event_discard - discard an event in the ring buffer
- * @buffer: the ring buffer
- * @event: the event to discard
- *
- * Sometimes a event that is in the ring buffer needs to be ignored.
- * This function lets the user discard an event in the ring buffer
- * and then that event will not be read later.
- *
- * Note, it is up to the user to be careful with this, and protect
- * against races. If the user discards an event that has been consumed
- * it is possible that it could corrupt the ring buffer.
- */
-void ring_buffer_event_discard(struct ring_buffer_event *event)
-{
- event->type = RINGBUF_TYPE_PADDING;
- /* time delta must be non zero */
- if (!event->time_delta)
- event->time_delta = 1;
-}
-
static unsigned
rb_event_data_length(struct ring_buffer_event *event)
{
unsigned length;
- if (event->len)
- length = event->len * RB_ALIGNMENT;
+ if (event->type_len)
+ length = event->type_len * RB_ALIGNMENT;
else
length = event->array[0];
return length + RB_EVNT_HDR_SIZE;
static unsigned
rb_event_length(struct ring_buffer_event *event)
{
- switch (event->type) {
+ switch (event->type_len) {
case RINGBUF_TYPE_PADDING:
if (rb_null_event(event))
/* undefined */
return -1;
- return rb_event_data_length(event);
+ return event->array[0] + RB_EVNT_HDR_SIZE;
case RINGBUF_TYPE_TIME_EXTEND:
return RB_LEN_TIME_EXTEND;
unsigned ring_buffer_event_length(struct ring_buffer_event *event)
{
unsigned length = rb_event_length(event);
- if (event->type != RINGBUF_TYPE_DATA)
+ if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
return length;
length -= RB_EVNT_HDR_SIZE;
if (length > RB_MAX_SMALL_DATA + sizeof(event->array[0]))
static void *
rb_event_data(struct ring_buffer_event *event)
{
- BUG_ON(event->type != RINGBUF_TYPE_DATA);
+ BUG_ON(event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
/* If length is in len field, then array[0] has the data */
- if (event->len)
+ if (event->type_len)
return (void *)&event->array[0];
/* Otherwise length is in array[0] and array[1] has the data */
return (void *)&event->array[1];
};
struct buffer_page {
+ struct list_head list; /* list of buffer pages */
local_t write; /* index for next write */
unsigned read; /* index for next read */
- struct list_head list; /* list of free pages */
+ local_t entries; /* entries on this page */
struct buffer_data_page *page; /* Actual data page */
};
#define BUF_PAGE_SIZE (PAGE_SIZE - BUF_PAGE_HDR_SIZE)
+int ring_buffer_print_page_header(struct trace_seq *s)
+{
+ struct buffer_data_page field;
+ int ret;
+
+ ret = trace_seq_printf(s, "\tfield: u64 timestamp;\t"
+ "offset:0;\tsize:%u;\n",
+ (unsigned int)sizeof(field.time_stamp));
+
+ ret = trace_seq_printf(s, "\tfield: local_t commit;\t"
+ "offset:%u;\tsize:%u;\n",
+ (unsigned int)offsetof(typeof(field), commit),
+ (unsigned int)sizeof(field.commit));
+
+ ret = trace_seq_printf(s, "\tfield: char data;\t"
+ "offset:%u;\tsize:%u;\n",
+ (unsigned int)offsetof(typeof(field), data),
+ (unsigned int)BUF_PAGE_SIZE);
+
+ return ret;
+}
+
/*
* head_page == tail_page && head == tail then buffer is empty.
*/
struct buffer_page *tail_page; /* write to tail */
struct buffer_page *commit_page; /* committed pages */
struct buffer_page *reader_page;
+ unsigned long nmi_dropped;
+ unsigned long commit_overrun;
unsigned long overrun;
- unsigned long entries;
+ unsigned long read;
+ local_t entries;
u64 write_stamp;
u64 read_stamp;
atomic_t record_disabled;
return rb_page_commit(cpu_buffer->head_page);
}
-/*
- * When the tail hits the head and the buffer is in overwrite mode,
- * the head jumps to the next page and all content on the previous
- * page is discarded. But before doing so, we update the overrun
- * variable of the buffer.
- */
-static void rb_update_overflow(struct ring_buffer_per_cpu *cpu_buffer)
-{
- struct ring_buffer_event *event;
- unsigned long head;
-
- for (head = 0; head < rb_head_size(cpu_buffer);
- head += rb_event_length(event)) {
-
- event = __rb_page_index(cpu_buffer->head_page, head);
- if (RB_WARN_ON(cpu_buffer, rb_null_event(event)))
- return;
- /* Only count data entries */
- if (event->type != RINGBUF_TYPE_DATA)
- continue;
- cpu_buffer->overrun++;
- cpu_buffer->entries--;
- }
-}
-
static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page **bpage)
{
rb_update_event(struct ring_buffer_event *event,
unsigned type, unsigned length)
{
- event->type = type;
+ event->type_len = type;
switch (type) {
case RINGBUF_TYPE_PADDING:
- break;
-
case RINGBUF_TYPE_TIME_EXTEND:
- event->len = DIV_ROUND_UP(RB_LEN_TIME_EXTEND, RB_ALIGNMENT);
- break;
-
case RINGBUF_TYPE_TIME_STAMP:
- event->len = DIV_ROUND_UP(RB_LEN_TIME_STAMP, RB_ALIGNMENT);
break;
- case RINGBUF_TYPE_DATA:
+ case 0:
length -= RB_EVNT_HDR_SIZE;
- if (length > RB_MAX_SMALL_DATA) {
- event->len = 0;
+ if (length > RB_MAX_SMALL_DATA)
event->array[0] = length;
- } else
- event->len = DIV_ROUND_UP(length, RB_ALIGNMENT);
+ else
+ event->type_len = DIV_ROUND_UP(length, RB_ALIGNMENT);
break;
default:
BUG();
return length;
}
+
static struct ring_buffer_event *
-__rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
- unsigned type, unsigned long length, u64 *ts)
+rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
+ unsigned long length, unsigned long tail,
+ struct buffer_page *commit_page,
+ struct buffer_page *tail_page, u64 *ts)
{
- struct buffer_page *tail_page, *head_page, *reader_page, *commit_page;
- unsigned long tail, write;
+ struct buffer_page *next_page, *head_page, *reader_page;
struct ring_buffer *buffer = cpu_buffer->buffer;
struct ring_buffer_event *event;
- unsigned long flags;
bool lock_taken = false;
+ unsigned long flags;
- commit_page = cpu_buffer->commit_page;
- /* we just need to protect against interrupts */
- barrier();
- tail_page = cpu_buffer->tail_page;
- write = local_add_return(length, &tail_page->write);
- tail = write - length;
+ next_page = tail_page;
- /* See if we shot pass the end of this buffer page */
- if (write > BUF_PAGE_SIZE) {
- struct buffer_page *next_page = tail_page;
+ local_irq_save(flags);
+ /*
+ * Since the write to the buffer is still not
+ * fully lockless, we must be careful with NMIs.
+ * The locks in the writers are taken when a write
+ * crosses to a new page. The locks protect against
+ * races with the readers (this will soon be fixed
+ * with a lockless solution).
+ *
+ * Because we can not protect against NMIs, and we
+ * want to keep traces reentrant, we need to manage
+ * what happens when we are in an NMI.
+ *
+ * NMIs can happen after we take the lock.
+ * If we are in an NMI, only take the lock
+ * if it is not already taken. Otherwise
+ * simply fail.
+ */
+ if (unlikely(in_nmi())) {
+ if (!__raw_spin_trylock(&cpu_buffer->lock)) {
+ cpu_buffer->nmi_dropped++;
+ goto out_reset;
+ }
+ } else
+ __raw_spin_lock(&cpu_buffer->lock);
- local_irq_save(flags);
- /*
- * Since the write to the buffer is still not
- * fully lockless, we must be careful with NMIs.
- * The locks in the writers are taken when a write
- * crosses to a new page. The locks protect against
- * races with the readers (this will soon be fixed
- * with a lockless solution).
- *
- * Because we can not protect against NMIs, and we
- * want to keep traces reentrant, we need to manage
- * what happens when we are in an NMI.
- *
- * NMIs can happen after we take the lock.
- * If we are in an NMI, only take the lock
- * if it is not already taken. Otherwise
- * simply fail.
- */
- if (unlikely(in_nmi())) {
- if (!__raw_spin_trylock(&cpu_buffer->lock))
- goto out_reset;
- } else
- __raw_spin_lock(&cpu_buffer->lock);
+ lock_taken = true;
- lock_taken = true;
+ rb_inc_page(cpu_buffer, &next_page);
- rb_inc_page(cpu_buffer, &next_page);
+ head_page = cpu_buffer->head_page;
+ reader_page = cpu_buffer->reader_page;
- head_page = cpu_buffer->head_page;
- reader_page = cpu_buffer->reader_page;
+ /* we grabbed the lock before incrementing */
+ if (RB_WARN_ON(cpu_buffer, next_page == reader_page))
+ goto out_reset;
- /* we grabbed the lock before incrementing */
- if (RB_WARN_ON(cpu_buffer, next_page == reader_page))
- goto out_reset;
+ /*
+ * If for some reason, we had an interrupt storm that made
+ * it all the way around the buffer, bail, and warn
+ * about it.
+ */
+ if (unlikely(next_page == commit_page)) {
+ cpu_buffer->commit_overrun++;
+ goto out_reset;
+ }
- /*
- * If for some reason, we had an interrupt storm that made
- * it all the way around the buffer, bail, and warn
- * about it.
- */
- if (unlikely(next_page == commit_page)) {
- WARN_ON_ONCE(1);
+ if (next_page == head_page) {
+ if (!(buffer->flags & RB_FL_OVERWRITE))
goto out_reset;
- }
-
- if (next_page == head_page) {
- if (!(buffer->flags & RB_FL_OVERWRITE))
- goto out_reset;
- /* tail_page has not moved yet? */
- if (tail_page == cpu_buffer->tail_page) {
- /* count overflows */
- rb_update_overflow(cpu_buffer);
+ /* tail_page has not moved yet? */
+ if (tail_page == cpu_buffer->tail_page) {
+ /* count overflows */
+ cpu_buffer->overrun +=
+ local_read(&head_page->entries);
- rb_inc_page(cpu_buffer, &head_page);
- cpu_buffer->head_page = head_page;
- cpu_buffer->head_page->read = 0;
- }
+ rb_inc_page(cpu_buffer, &head_page);
+ cpu_buffer->head_page = head_page;
+ cpu_buffer->head_page->read = 0;
}
+ }
- /*
- * If the tail page is still the same as what we think
- * it is, then it is up to us to update the tail
- * pointer.
- */
- if (tail_page == cpu_buffer->tail_page) {
- local_set(&next_page->write, 0);
- local_set(&next_page->page->commit, 0);
- cpu_buffer->tail_page = next_page;
+ /*
+ * If the tail page is still the same as what we think
+ * it is, then it is up to us to update the tail
+ * pointer.
+ */
+ if (tail_page == cpu_buffer->tail_page) {
+ local_set(&next_page->write, 0);
+ local_set(&next_page->entries, 0);
+ local_set(&next_page->page->commit, 0);
+ cpu_buffer->tail_page = next_page;
+
+ /* reread the time stamp */
+ *ts = ring_buffer_time_stamp(buffer, cpu_buffer->cpu);
+ cpu_buffer->tail_page->page->time_stamp = *ts;
+ }
- /* reread the time stamp */
- *ts = ring_buffer_time_stamp(buffer, cpu_buffer->cpu);
- cpu_buffer->tail_page->page->time_stamp = *ts;
- }
+ /*
+ * The actual tail page has moved forward.
+ */
+ if (tail < BUF_PAGE_SIZE) {
+ /* Mark the rest of the page with padding */
+ event = __rb_page_index(tail_page, tail);
+ rb_event_set_padding(event);
+ }
- /*
- * The actual tail page has moved forward.
- */
- if (tail < BUF_PAGE_SIZE) {
- /* Mark the rest of the page with padding */
- event = __rb_page_index(tail_page, tail);
- rb_event_set_padding(event);
- }
+ /* Set the write back to the previous setting */
+ local_sub(length, &tail_page->write);
- if (tail <= BUF_PAGE_SIZE)
- /* Set the write back to the previous setting */
- local_set(&tail_page->write, tail);
+ /*
+ * If this was a commit entry that failed,
+ * increment that too
+ */
+ if (tail_page == cpu_buffer->commit_page &&
+ tail == rb_commit_index(cpu_buffer)) {
+ rb_set_commit_to_write(cpu_buffer);
+ }
- /*
- * If this was a commit entry that failed,
- * increment that too
- */
- if (tail_page == cpu_buffer->commit_page &&
- tail == rb_commit_index(cpu_buffer)) {
- rb_set_commit_to_write(cpu_buffer);
- }
+ __raw_spin_unlock(&cpu_buffer->lock);
+ local_irq_restore(flags);
+
+ /* fail and let the caller try again */
+ return ERR_PTR(-EAGAIN);
+
+ out_reset:
+ /* reset write */
+ local_sub(length, &tail_page->write);
+ if (likely(lock_taken))
__raw_spin_unlock(&cpu_buffer->lock);
- local_irq_restore(flags);
+ local_irq_restore(flags);
+ return NULL;
+}
- /* fail and let the caller try again */
- return ERR_PTR(-EAGAIN);
- }
+static struct ring_buffer_event *
+__rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
+ unsigned type, unsigned long length, u64 *ts)
+{
+ struct buffer_page *tail_page, *commit_page;
+ struct ring_buffer_event *event;
+ unsigned long tail, write;
+
+ commit_page = cpu_buffer->commit_page;
+ /* we just need to protect against interrupts */
+ barrier();
+ tail_page = cpu_buffer->tail_page;
+ write = local_add_return(length, &tail_page->write);
+ tail = write - length;
+
+ /* See if we shot pass the end of this buffer page */
+ if (write > BUF_PAGE_SIZE)
+ return rb_move_tail(cpu_buffer, length, tail,
+ commit_page, tail_page, ts);
/* We reserved something on the buffer */
event = __rb_page_index(tail_page, tail);
rb_update_event(event, type, length);
+ /* The passed in type is zero for DATA */
+ if (likely(!type))
+ local_inc(&tail_page->entries);
+
/*
* If this is a commit and the tail is zero, then update
* this page's time stamp.
cpu_buffer->commit_page->page->time_stamp = *ts;
return event;
-
- out_reset:
- /* reset write */
- if (tail <= BUF_PAGE_SIZE)
- local_set(&tail_page->write, tail);
-
- if (likely(lock_taken))
- __raw_spin_unlock(&cpu_buffer->lock);
- local_irq_restore(flags);
- return NULL;
}
static int
return event;
}
+#define TRACE_RECURSIVE_DEPTH 16
+
+static int trace_recursive_lock(void)
+{
+ current->trace_recursion++;
+
+ if (likely(current->trace_recursion < TRACE_RECURSIVE_DEPTH))
+ return 0;
+
+ /* Disable all tracing before we do anything else */
+ tracing_off_permanent();
+
+ printk_once(KERN_WARNING "Tracing recursion: depth[%ld]:"
+ "HC[%lu]:SC[%lu]:NMI[%lu]\n",
+ current->trace_recursion,
+ hardirq_count() >> HARDIRQ_SHIFT,
+ softirq_count() >> SOFTIRQ_SHIFT,
+ in_nmi());
+
+ WARN_ON_ONCE(1);
+ return -1;
+}
+
+static void trace_recursive_unlock(void)
+{
+ WARN_ON_ONCE(!current->trace_recursion);
+
+ current->trace_recursion--;
+}
+
static DEFINE_PER_CPU(int, rb_need_resched);
/**
/* If we are tracing schedule, we don't want to recurse */
resched = ftrace_preempt_disable();
+ if (trace_recursive_lock())
+ goto out_nocheck;
+
cpu = raw_smp_processor_id();
if (!cpumask_test_cpu(cpu, buffer->cpumask))
if (length > BUF_PAGE_SIZE)
goto out;
- event = rb_reserve_next_event(cpu_buffer, RINGBUF_TYPE_DATA, length);
+ event = rb_reserve_next_event(cpu_buffer, 0, length);
if (!event)
goto out;
return event;
out:
+ trace_recursive_unlock();
+
+ out_nocheck:
ftrace_preempt_enable(resched);
return NULL;
}
static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
- cpu_buffer->entries++;
+ local_inc(&cpu_buffer->entries);
/* Only process further if we own the commit */
if (!rb_is_commit(cpu_buffer, event))
rb_commit(cpu_buffer, event);
+ trace_recursive_unlock();
+
/*
* Only the last preempt count needs to restore preemption.
*/
}
EXPORT_SYMBOL_GPL(ring_buffer_unlock_commit);
+static inline void rb_event_discard(struct ring_buffer_event *event)
+{
+ /* array[0] holds the actual length for the discarded event */
+ event->array[0] = rb_event_data_length(event) - RB_EVNT_HDR_SIZE;
+ event->type_len = RINGBUF_TYPE_PADDING;
+ /* time delta must be non zero */
+ if (!event->time_delta)
+ event->time_delta = 1;
+}
+
+/**
+ * ring_buffer_event_discard - discard any event in the ring buffer
+ * @event: the event to discard
+ *
+ * Sometimes a event that is in the ring buffer needs to be ignored.
+ * This function lets the user discard an event in the ring buffer
+ * and then that event will not be read later.
+ *
+ * Note, it is up to the user to be careful with this, and protect
+ * against races. If the user discards an event that has been consumed
+ * it is possible that it could corrupt the ring buffer.
+ */
+void ring_buffer_event_discard(struct ring_buffer_event *event)
+{
+ rb_event_discard(event);
+}
+EXPORT_SYMBOL_GPL(ring_buffer_event_discard);
+
+/**
+ * ring_buffer_commit_discard - discard an event that has not been committed
+ * @buffer: the ring buffer
+ * @event: non committed event to discard
+ *
+ * This is similar to ring_buffer_event_discard but must only be
+ * performed on an event that has not been committed yet. The difference
+ * is that this will also try to free the event from the ring buffer
+ * if another event has not been added behind it.
+ *
+ * If another event has been added behind it, it will set the event
+ * up as discarded, and perform the commit.
+ *
+ * If this function is called, do not call ring_buffer_unlock_commit on
+ * the event.
+ */
+void ring_buffer_discard_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event)
+{
+ struct ring_buffer_per_cpu *cpu_buffer;
+ unsigned long new_index, old_index;
+ struct buffer_page *bpage;
+ unsigned long index;
+ unsigned long addr;
+ int cpu;
+
+ /* The event is discarded regardless */
+ rb_event_discard(event);
+
+ /*
+ * This must only be called if the event has not been
+ * committed yet. Thus we can assume that preemption
+ * is still disabled.
+ */
+ RB_WARN_ON(buffer, !preempt_count());
+
+ cpu = smp_processor_id();
+ cpu_buffer = buffer->buffers[cpu];
+
+ new_index = rb_event_index(event);
+ old_index = new_index + rb_event_length(event);
+ addr = (unsigned long)event;
+ addr &= PAGE_MASK;
+
+ bpage = cpu_buffer->tail_page;
+
+ if (bpage == (void *)addr && rb_page_write(bpage) == old_index) {
+ /*
+ * This is on the tail page. It is possible that
+ * a write could come in and move the tail page
+ * and write to the next page. That is fine
+ * because we just shorten what is on this page.
+ */
+ index = local_cmpxchg(&bpage->write, old_index, new_index);
+ if (index == old_index)
+ goto out;
+ }
+
+ /*
+ * The commit is still visible by the reader, so we
+ * must increment entries.
+ */
+ local_inc(&cpu_buffer->entries);
+ out:
+ /*
+ * If a write came in and pushed the tail page
+ * we still need to update the commit pointer
+ * if we were the commit.
+ */
+ if (rb_is_commit(cpu_buffer, event))
+ rb_set_commit_to_write(cpu_buffer);
+
+ trace_recursive_unlock();
+
+ /*
+ * Only the last preempt count needs to restore preemption.
+ */
+ if (preempt_count() == 1)
+ ftrace_preempt_enable(per_cpu(rb_need_resched, cpu));
+ else
+ preempt_enable_no_resched_notrace();
+
+}
+EXPORT_SYMBOL_GPL(ring_buffer_discard_commit);
+
/**
* ring_buffer_write - write data to the buffer without reserving
* @buffer: The ring buffer to write to.
goto out;
event_length = rb_calculate_event_length(length);
- event = rb_reserve_next_event(cpu_buffer,
- RINGBUF_TYPE_DATA, event_length);
+ event = rb_reserve_next_event(cpu_buffer, 0, event_length);
if (!event)
goto out;
return 0;
cpu_buffer = buffer->buffers[cpu];
- ret = cpu_buffer->entries;
+ ret = (local_read(&cpu_buffer->entries) - cpu_buffer->overrun)
+ - cpu_buffer->read;
return ret;
}
}
EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu);
+/**
+ * ring_buffer_nmi_dropped_cpu - get the number of nmis that were dropped
+ * @buffer: The ring buffer
+ * @cpu: The per CPU buffer to get the number of overruns from
+ */
+unsigned long ring_buffer_nmi_dropped_cpu(struct ring_buffer *buffer, int cpu)
+{
+ struct ring_buffer_per_cpu *cpu_buffer;
+ unsigned long ret;
+
+ if (!cpumask_test_cpu(cpu, buffer->cpumask))
+ return 0;
+
+ cpu_buffer = buffer->buffers[cpu];
+ ret = cpu_buffer->nmi_dropped;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ring_buffer_nmi_dropped_cpu);
+
+/**
+ * ring_buffer_commit_overrun_cpu - get the number of overruns caused by commits
+ * @buffer: The ring buffer
+ * @cpu: The per CPU buffer to get the number of overruns from
+ */
+unsigned long
+ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu)
+{
+ struct ring_buffer_per_cpu *cpu_buffer;
+ unsigned long ret;
+
+ if (!cpumask_test_cpu(cpu, buffer->cpumask))
+ return 0;
+
+ cpu_buffer = buffer->buffers[cpu];
+ ret = cpu_buffer->commit_overrun;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ring_buffer_commit_overrun_cpu);
+
/**
* ring_buffer_entries - get the number of entries in a buffer
* @buffer: The ring buffer
/* if you care about this being correct, lock the buffer */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
- entries += cpu_buffer->entries;
+ entries += (local_read(&cpu_buffer->entries) -
+ cpu_buffer->overrun) - cpu_buffer->read;
}
return entries;
{
u64 delta;
- switch (event->type) {
+ switch (event->type_len) {
case RINGBUF_TYPE_PADDING:
return;
{
u64 delta;
- switch (event->type) {
+ switch (event->type_len) {
case RINGBUF_TYPE_PADDING:
return;
cpu_buffer->reader_page->list.prev = reader->list.prev;
local_set(&cpu_buffer->reader_page->write, 0);
+ local_set(&cpu_buffer->reader_page->entries, 0);
local_set(&cpu_buffer->reader_page->page->commit, 0);
/* Make the reader page now replace the head */
event = rb_reader_event(cpu_buffer);
- if (event->type == RINGBUF_TYPE_DATA || rb_discarded_event(event))
- cpu_buffer->entries--;
+ if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX
+ || rb_discarded_event(event))
+ cpu_buffer->read++;
rb_update_read_stamp(cpu_buffer, event);
event = rb_reader_event(cpu_buffer);
- switch (event->type) {
+ switch (event->type_len) {
case RINGBUF_TYPE_PADDING:
if (rb_null_event(event))
RB_WARN_ON(cpu_buffer, 1);
event = rb_iter_head_event(iter);
- switch (event->type) {
+ switch (event->type_len) {
case RINGBUF_TYPE_PADDING:
if (rb_null_event(event)) {
rb_inc_iter(iter);
event = rb_buffer_peek(buffer, cpu, ts);
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
- if (event && event->type == RINGBUF_TYPE_PADDING) {
+ if (event && event->type_len == RINGBUF_TYPE_PADDING) {
cpu_relax();
goto again;
}
event = rb_iter_peek(iter, ts);
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
- if (event && event->type == RINGBUF_TYPE_PADDING) {
+ if (event && event->type_len == RINGBUF_TYPE_PADDING) {
cpu_relax();
goto again;
}
out:
preempt_enable();
- if (event && event->type == RINGBUF_TYPE_PADDING) {
+ if (event && event->type_len == RINGBUF_TYPE_PADDING) {
cpu_relax();
goto again;
}
out:
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
- if (event && event->type == RINGBUF_TYPE_PADDING) {
+ if (event && event->type_len == RINGBUF_TYPE_PADDING) {
cpu_relax();
goto again;
}
cpu_buffer->head_page
= list_entry(cpu_buffer->pages.next, struct buffer_page, list);
local_set(&cpu_buffer->head_page->write, 0);
+ local_set(&cpu_buffer->head_page->entries, 0);
local_set(&cpu_buffer->head_page->page->commit, 0);
cpu_buffer->head_page->read = 0;
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
local_set(&cpu_buffer->reader_page->write, 0);
+ local_set(&cpu_buffer->reader_page->entries, 0);
local_set(&cpu_buffer->reader_page->page->commit, 0);
cpu_buffer->reader_page->read = 0;
+ cpu_buffer->nmi_dropped = 0;
+ cpu_buffer->commit_overrun = 0;
cpu_buffer->overrun = 0;
- cpu_buffer->entries = 0;
+ cpu_buffer->read = 0;
+ local_set(&cpu_buffer->entries, 0);
cpu_buffer->write_stamp = 0;
cpu_buffer->read_stamp = 0;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return;
+ atomic_inc(&cpu_buffer->record_disabled);
+
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
__raw_spin_lock(&cpu_buffer->lock);
__raw_spin_unlock(&cpu_buffer->lock);
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+
+ atomic_dec(&cpu_buffer->record_disabled);
}
EXPORT_SYMBOL_GPL(ring_buffer_reset_cpu);
}
EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu);
-static void rb_remove_entries(struct ring_buffer_per_cpu *cpu_buffer,
- struct buffer_data_page *bpage,
- unsigned int offset)
-{
- struct ring_buffer_event *event;
- unsigned long head;
-
- __raw_spin_lock(&cpu_buffer->lock);
- for (head = offset; head < local_read(&bpage->commit);
- head += rb_event_length(event)) {
-
- event = __rb_data_page_index(bpage, head);
- if (RB_WARN_ON(cpu_buffer, rb_null_event(event)))
- return;
- /* Only count data entries */
- if (event->type != RINGBUF_TYPE_DATA)
- continue;
- cpu_buffer->entries--;
- }
- __raw_spin_unlock(&cpu_buffer->lock);
-}
-
/**
* ring_buffer_alloc_read_page - allocate a page to read from buffer
* @buffer: the buffer to allocate for.
return bpage;
}
+EXPORT_SYMBOL_GPL(ring_buffer_alloc_read_page);
/**
* ring_buffer_free_read_page - free an allocated read page
{
free_page((unsigned long)data);
}
+EXPORT_SYMBOL_GPL(ring_buffer_free_read_page);
/**
* ring_buffer_read_page - extract a page from the ring buffer
/* we copied everything to the beginning */
read = 0;
} else {
+ /* update the entry counter */
+ cpu_buffer->read += local_read(&reader->entries);
+
/* swap the pages */
rb_init_page(bpage);
bpage = reader->page;
reader->page = *data_page;
local_set(&reader->write, 0);
+ local_set(&reader->entries, 0);
reader->read = 0;
*data_page = bpage;
-
- /* update the entry counter */
- rb_remove_entries(cpu_buffer, bpage, read);
}
ret = read;
out:
return ret;
}
+EXPORT_SYMBOL_GPL(ring_buffer_read_page);
static ssize_t
rb_simple_read(struct file *filp, char __user *ubuf,
static __init int rb_init_debugfs(void)
{
struct dentry *d_tracer;
- struct dentry *entry;
d_tracer = tracing_init_dentry();
- entry = debugfs_create_file("tracing_on", 0644, d_tracer,
- &ring_buffer_flags, &rb_simple_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'tracing_on' entry\n");
+ trace_create_file("tracing_on", 0644, d_tracer,
+ &ring_buffer_flags, &rb_simple_fops);
return 0;
}
--- /dev/null
+/*
+ * ring buffer tester and benchmark
+ *
+ * Copyright (C) 2009 Steven Rostedt <srostedt@redhat.com>
+ */
+#include <linux/ring_buffer.h>
+#include <linux/completion.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/time.h>
+
+struct rb_page {
+ u64 ts;
+ local_t commit;
+ char data[4080];
+};
+
+/* run time and sleep time in seconds */
+#define RUN_TIME 10
+#define SLEEP_TIME 10
+
+/* number of events for writer to wake up the reader */
+static int wakeup_interval = 100;
+
+static int reader_finish;
+static struct completion read_start;
+static struct completion read_done;
+
+static struct ring_buffer *buffer;
+static struct task_struct *producer;
+static struct task_struct *consumer;
+static unsigned long read;
+
+static int disable_reader;
+module_param(disable_reader, uint, 0644);
+MODULE_PARM_DESC(disable_reader, "only run producer");
+
+static int read_events;
+
+static int kill_test;
+
+#define KILL_TEST() \
+ do { \
+ if (!kill_test) { \
+ kill_test = 1; \
+ WARN_ON(1); \
+ } \
+ } while (0)
+
+enum event_status {
+ EVENT_FOUND,
+ EVENT_DROPPED,
+};
+
+static enum event_status read_event(int cpu)
+{
+ struct ring_buffer_event *event;
+ int *entry;
+ u64 ts;
+
+ event = ring_buffer_consume(buffer, cpu, &ts);
+ if (!event)
+ return EVENT_DROPPED;
+
+ entry = ring_buffer_event_data(event);
+ if (*entry != cpu) {
+ KILL_TEST();
+ return EVENT_DROPPED;
+ }
+
+ read++;
+ return EVENT_FOUND;
+}
+
+static enum event_status read_page(int cpu)
+{
+ struct ring_buffer_event *event;
+ struct rb_page *rpage;
+ unsigned long commit;
+ void *bpage;
+ int *entry;
+ int ret;
+ int inc;
+ int i;
+
+ bpage = ring_buffer_alloc_read_page(buffer);
+ if (!bpage)
+ return EVENT_DROPPED;
+
+ ret = ring_buffer_read_page(buffer, &bpage, PAGE_SIZE, cpu, 1);
+ if (ret >= 0) {
+ rpage = bpage;
+ commit = local_read(&rpage->commit);
+ for (i = 0; i < commit && !kill_test; i += inc) {
+
+ if (i >= (PAGE_SIZE - offsetof(struct rb_page, data))) {
+ KILL_TEST();
+ break;
+ }
+
+ inc = -1;
+ event = (void *)&rpage->data[i];
+ switch (event->type_len) {
+ case RINGBUF_TYPE_PADDING:
+ /* We don't expect any padding */
+ KILL_TEST();
+ break;
+ case RINGBUF_TYPE_TIME_EXTEND:
+ inc = 8;
+ break;
+ case 0:
+ entry = ring_buffer_event_data(event);
+ if (*entry != cpu) {
+ KILL_TEST();
+ break;
+ }
+ read++;
+ if (!event->array[0]) {
+ KILL_TEST();
+ break;
+ }
+ inc = event->array[0];
+ break;
+ default:
+ entry = ring_buffer_event_data(event);
+ if (*entry != cpu) {
+ KILL_TEST();
+ break;
+ }
+ read++;
+ inc = ((event->type_len + 1) * 4);
+ }
+ if (kill_test)
+ break;
+
+ if (inc <= 0) {
+ KILL_TEST();
+ break;
+ }
+ }
+ }
+ ring_buffer_free_read_page(buffer, bpage);
+
+ if (ret < 0)
+ return EVENT_DROPPED;
+ return EVENT_FOUND;
+}
+
+static void ring_buffer_consumer(void)
+{
+ /* toggle between reading pages and events */
+ read_events ^= 1;
+
+ read = 0;
+ while (!reader_finish && !kill_test) {
+ int found;
+
+ do {
+ int cpu;
+
+ found = 0;
+ for_each_online_cpu(cpu) {
+ enum event_status stat;
+
+ if (read_events)
+ stat = read_event(cpu);
+ else
+ stat = read_page(cpu);
+
+ if (kill_test)
+ break;
+ if (stat == EVENT_FOUND)
+ found = 1;
+ }
+ } while (found && !kill_test);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (reader_finish)
+ break;
+
+ schedule();
+ __set_current_state(TASK_RUNNING);
+ }
+ reader_finish = 0;
+ complete(&read_done);
+}
+
+/*
+ * If we are a non preempt kernel, the 10 second run will
+ * stop everything while it runs. Instead, we will call cond_resched
+ * and also add any time that was lost by a rescedule.
+ */
+#ifdef CONFIG_PREEMPT
+static void sched_if_needed(struct timeval *start_tv, struct timeval *end_tv)
+{
+}
+#else
+static void sched_if_needed(struct timeval *start_tv, struct timeval *end_tv)
+{
+ struct timeval tv;
+
+ cond_resched();
+ do_gettimeofday(&tv);
+ if (tv.tv_usec < end_tv->tv_usec) {
+ tv.tv_usec += 1000000;
+ tv.tv_sec--;
+ }
+ start_tv->tv_sec += tv.tv_sec - end_tv->tv_sec;
+ start_tv->tv_usec += tv.tv_usec - end_tv->tv_usec;
+ if (start_tv->tv_usec > 1000000) {
+ start_tv->tv_usec -= 1000000;
+ start_tv->tv_sec++;
+ }
+}
+#endif
+
+static void ring_buffer_producer(void)
+{
+ struct timeval start_tv;
+ struct timeval end_tv;
+ unsigned long long time;
+ unsigned long long entries;
+ unsigned long long overruns;
+ unsigned long missed = 0;
+ unsigned long hit = 0;
+ unsigned long avg;
+ int cnt = 0;
+
+ /*
+ * Hammer the buffer for 10 secs (this may
+ * make the system stall)
+ */
+ pr_info("Starting ring buffer hammer\n");
+ do_gettimeofday(&start_tv);
+ do {
+ struct ring_buffer_event *event;
+ int *entry;
+
+ event = ring_buffer_lock_reserve(buffer, 10);
+ if (!event) {
+ missed++;
+ } else {
+ hit++;
+ entry = ring_buffer_event_data(event);
+ *entry = smp_processor_id();
+ ring_buffer_unlock_commit(buffer, event);
+ }
+ do_gettimeofday(&end_tv);
+
+ if (consumer && !(++cnt % wakeup_interval))
+ wake_up_process(consumer);
+
+ sched_if_needed(&start_tv, &end_tv);
+
+ } while (end_tv.tv_sec < (start_tv.tv_sec + RUN_TIME) && !kill_test);
+ pr_info("End ring buffer hammer\n");
+
+ if (consumer) {
+ /* Init both completions here to avoid races */
+ init_completion(&read_start);
+ init_completion(&read_done);
+ /* the completions must be visible before the finish var */
+ smp_wmb();
+ reader_finish = 1;
+ /* finish var visible before waking up the consumer */
+ smp_wmb();
+ wake_up_process(consumer);
+ wait_for_completion(&read_done);
+ }
+
+ time = end_tv.tv_sec - start_tv.tv_sec;
+ time *= 1000000;
+ time += (long long)((long)end_tv.tv_usec - (long)start_tv.tv_usec);
+
+ entries = ring_buffer_entries(buffer);
+ overruns = ring_buffer_overruns(buffer);
+
+ if (kill_test)
+ pr_info("ERROR!\n");
+ pr_info("Time: %lld (usecs)\n", time);
+ pr_info("Overruns: %lld\n", overruns);
+ if (disable_reader)
+ pr_info("Read: (reader disabled)\n");
+ else
+ pr_info("Read: %ld (by %s)\n", read,
+ read_events ? "events" : "pages");
+ pr_info("Entries: %lld\n", entries);
+ pr_info("Total: %lld\n", entries + overruns + read);
+ pr_info("Missed: %ld\n", missed);
+ pr_info("Hit: %ld\n", hit);
+
+ do_div(time, 1000);
+ if (time)
+ hit /= (long)time;
+ else
+ pr_info("TIME IS ZERO??\n");
+
+ pr_info("Entries per millisec: %ld\n", hit);
+
+ if (hit) {
+ avg = 1000000 / hit;
+ pr_info("%ld ns per entry\n", avg);
+ }
+}
+
+static void wait_to_die(void)
+{
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (!kthread_should_stop()) {
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ __set_current_state(TASK_RUNNING);
+}
+
+static int ring_buffer_consumer_thread(void *arg)
+{
+ while (!kthread_should_stop() && !kill_test) {
+ complete(&read_start);
+
+ ring_buffer_consumer();
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (kthread_should_stop() || kill_test)
+ break;
+
+ schedule();
+ __set_current_state(TASK_RUNNING);
+ }
+ __set_current_state(TASK_RUNNING);
+
+ if (kill_test)
+ wait_to_die();
+
+ return 0;
+}
+
+static int ring_buffer_producer_thread(void *arg)
+{
+ init_completion(&read_start);
+
+ while (!kthread_should_stop() && !kill_test) {
+ ring_buffer_reset(buffer);
+
+ if (consumer) {
+ smp_wmb();
+ wake_up_process(consumer);
+ wait_for_completion(&read_start);
+ }
+
+ ring_buffer_producer();
+
+ pr_info("Sleeping for 10 secs\n");
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ * SLEEP_TIME);
+ __set_current_state(TASK_RUNNING);
+ }
+
+ if (kill_test)
+ wait_to_die();
+
+ return 0;
+}
+
+static int __init ring_buffer_benchmark_init(void)
+{
+ int ret;
+
+ /* make a one meg buffer in overwite mode */
+ buffer = ring_buffer_alloc(1000000, RB_FL_OVERWRITE);
+ if (!buffer)
+ return -ENOMEM;
+
+ if (!disable_reader) {
+ consumer = kthread_create(ring_buffer_consumer_thread,
+ NULL, "rb_consumer");
+ ret = PTR_ERR(consumer);
+ if (IS_ERR(consumer))
+ goto out_fail;
+ }
+
+ producer = kthread_run(ring_buffer_producer_thread,
+ NULL, "rb_producer");
+ ret = PTR_ERR(producer);
+
+ if (IS_ERR(producer))
+ goto out_kill;
+
+ return 0;
+
+ out_kill:
+ if (consumer)
+ kthread_stop(consumer);
+
+ out_fail:
+ ring_buffer_free(buffer);
+ return ret;
+}
+
+static void __exit ring_buffer_benchmark_exit(void)
+{
+ kthread_stop(producer);
+ if (consumer)
+ kthread_stop(consumer);
+ ring_buffer_free(buffer);
+}
+
+module_init(ring_buffer_benchmark_init);
+module_exit(ring_buffer_benchmark_exit);
+
+MODULE_AUTHOR("Steven Rostedt");
+MODULE_DESCRIPTION("ring_buffer_benchmark");
+MODULE_LICENSE("GPL");
static DEFINE_PER_CPU(struct trace_array_cpu, global_trace_cpu);
+int filter_current_check_discard(struct ftrace_event_call *call, void *rec,
+ struct ring_buffer_event *event)
+{
+ return filter_check_discard(call, rec, global_trace.buffer, event);
+}
+EXPORT_SYMBOL_GPL(filter_current_check_discard);
+
cycle_t ftrace_now(int cpu)
{
u64 ts;
/* trace_flags holds trace_options default values */
unsigned long trace_flags = TRACE_ITER_PRINT_PARENT | TRACE_ITER_PRINTK |
- TRACE_ITER_ANNOTATE | TRACE_ITER_CONTEXT_INFO | TRACE_ITER_SLEEP_TIME;
+ TRACE_ITER_ANNOTATE | TRACE_ITER_CONTEXT_INFO | TRACE_ITER_SLEEP_TIME |
+ TRACE_ITER_GRAPH_TIME;
/**
* trace_wake_up - wake up tasks waiting for trace input
"latency-format",
"global-clock",
"sleep-time",
+ "graph-time",
NULL
};
return cnt;
}
-static void
-trace_print_seq(struct seq_file *m, struct trace_seq *s)
-{
- int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
-
- s->buffer[len] = 0;
- seq_puts(m, s->buffer);
-
- trace_seq_init(s);
-}
-
/**
* update_max_tr - snapshot all trace buffers from global_trace to max_tr
* @tr: tracer
tracing_reset(tr, cpu);
}
+void tracing_reset_current(int cpu)
+{
+ tracing_reset(&global_trace, cpu);
+}
+
+void tracing_reset_current_online_cpus(void)
+{
+ tracing_reset_online_cpus(&global_trace);
+}
+
#define SAVED_CMDLINES 128
#define NO_CMDLINE_MAP UINT_MAX
static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1];
}
struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
- unsigned char type,
+ int type,
unsigned long len,
unsigned long flags, int pc)
{
}
struct ring_buffer_event *
-trace_current_buffer_lock_reserve(unsigned char type, unsigned long len,
+trace_current_buffer_lock_reserve(int type, unsigned long len,
unsigned long flags, int pc)
{
return trace_buffer_lock_reserve(&global_trace,
type, len, flags, pc);
}
+EXPORT_SYMBOL_GPL(trace_current_buffer_lock_reserve);
void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
unsigned long flags, int pc)
{
- return __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 1);
+ __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 1);
}
+EXPORT_SYMBOL_GPL(trace_current_buffer_unlock_commit);
void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
unsigned long flags, int pc)
{
- return __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 0);
+ __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 0);
}
+EXPORT_SYMBOL_GPL(trace_nowake_buffer_unlock_commit);
+
+void trace_current_buffer_discard_commit(struct ring_buffer_event *event)
+{
+ ring_buffer_discard_commit(global_trace.buffer, event);
+}
+EXPORT_SYMBOL_GPL(trace_current_buffer_discard_commit);
void
trace_function(struct trace_array *tr,
unsigned long ip, unsigned long parent_ip, unsigned long flags,
int pc)
{
+ struct ftrace_event_call *call = &event_function;
struct ring_buffer_event *event;
struct ftrace_entry *entry;
entry = ring_buffer_event_data(event);
entry->ip = ip;
entry->parent_ip = parent_ip;
- ring_buffer_unlock_commit(tr->buffer, event);
+
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
}
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
unsigned long flags,
int pc)
{
+ struct ftrace_event_call *call = &event_funcgraph_entry;
struct ring_buffer_event *event;
struct ftrace_graph_ent_entry *entry;
return 0;
entry = ring_buffer_event_data(event);
entry->graph_ent = *trace;
- ring_buffer_unlock_commit(global_trace.buffer, event);
+ if (!filter_current_check_discard(call, entry, event))
+ ring_buffer_unlock_commit(global_trace.buffer, event);
return 1;
}
unsigned long flags,
int pc)
{
+ struct ftrace_event_call *call = &event_funcgraph_exit;
struct ring_buffer_event *event;
struct ftrace_graph_ret_entry *entry;
return;
entry = ring_buffer_event_data(event);
entry->ret = *trace;
- ring_buffer_unlock_commit(global_trace.buffer, event);
+ if (!filter_current_check_discard(call, entry, event))
+ ring_buffer_unlock_commit(global_trace.buffer, event);
}
#endif
int skip, int pc)
{
#ifdef CONFIG_STACKTRACE
+ struct ftrace_event_call *call = &event_kernel_stack;
struct ring_buffer_event *event;
struct stack_entry *entry;
struct stack_trace trace;
trace.entries = entry->caller;
save_stack_trace(&trace);
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
#endif
}
unsigned long flags, int pc)
{
#ifdef CONFIG_STACKTRACE
+ struct ftrace_event_call *call = &event_user_stack;
struct ring_buffer_event *event;
struct userstack_entry *entry;
struct stack_trace trace;
trace.entries = entry->caller;
save_stack_trace_user(&trace);
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
#endif
}
struct task_struct *next,
unsigned long flags, int pc)
{
+ struct ftrace_event_call *call = &event_context_switch;
struct ring_buffer_event *event;
struct ctx_switch_entry *entry;
entry->next_prio = next->prio;
entry->next_state = next->state;
entry->next_cpu = task_cpu(next);
- trace_buffer_unlock_commit(tr, event, flags, pc);
+
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ trace_buffer_unlock_commit(tr, event, flags, pc);
}
void
struct task_struct *curr,
unsigned long flags, int pc)
{
+ struct ftrace_event_call *call = &event_wakeup;
struct ring_buffer_event *event;
struct ctx_switch_entry *entry;
entry->next_state = wakee->state;
entry->next_cpu = task_cpu(wakee);
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
ftrace_trace_stack(tr, flags, 6, pc);
ftrace_trace_userstack(tr, flags, pc);
}
(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
static u32 trace_buf[TRACE_BUF_SIZE];
+ struct ftrace_event_call *call = &event_bprint;
struct ring_buffer_event *event;
struct trace_array *tr = &global_trace;
struct trace_array_cpu *data;
struct bprint_entry *entry;
unsigned long flags;
+ int disable;
int resched;
int cpu, len = 0, size, pc;
cpu = raw_smp_processor_id();
data = tr->data[cpu];
- if (unlikely(atomic_read(&data->disabled)))
+ disable = atomic_inc_return(&data->disabled);
+ if (unlikely(disable != 1))
goto out;
/* Lockdep uses trace_printk for lock tracing */
entry->fmt = fmt;
memcpy(entry->buf, trace_buf, sizeof(u32) * len);
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
out_unlock:
__raw_spin_unlock(&trace_buf_lock);
local_irq_restore(flags);
out:
+ atomic_dec_return(&data->disabled);
ftrace_preempt_enable(resched);
unpause_graph_tracing();
static raw_spinlock_t trace_buf_lock = __RAW_SPIN_LOCK_UNLOCKED;
static char trace_buf[TRACE_BUF_SIZE];
+ struct ftrace_event_call *call = &event_print;
struct ring_buffer_event *event;
struct trace_array *tr = &global_trace;
struct trace_array_cpu *data;
int cpu, len = 0, size, pc;
struct print_entry *entry;
unsigned long irq_flags;
+ int disable;
if (tracing_disabled || tracing_selftest_running)
return 0;
cpu = raw_smp_processor_id();
data = tr->data[cpu];
- if (unlikely(atomic_read(&data->disabled)))
+ disable = atomic_inc_return(&data->disabled);
+ if (unlikely(disable != 1))
goto out;
pause_graph_tracing();
memcpy(&entry->buf, trace_buf, len);
entry->buf[len] = 0;
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
out_unlock:
__raw_spin_unlock(&trace_buf_lock);
raw_local_irq_restore(irq_flags);
unpause_graph_tracing();
out:
+ atomic_dec_return(&data->disabled);
preempt_enable_notrace();
return len;
.read = tracing_readme_read,
};
+static ssize_t
+tracing_saved_cmdlines_read(struct file *file, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ char *buf_comm;
+ char *file_buf;
+ char *buf;
+ int len = 0;
+ int pid;
+ int i;
+
+ file_buf = kmalloc(SAVED_CMDLINES*(16+TASK_COMM_LEN), GFP_KERNEL);
+ if (!file_buf)
+ return -ENOMEM;
+
+ buf_comm = kmalloc(TASK_COMM_LEN, GFP_KERNEL);
+ if (!buf_comm) {
+ kfree(file_buf);
+ return -ENOMEM;
+ }
+
+ buf = file_buf;
+
+ for (i = 0; i < SAVED_CMDLINES; i++) {
+ int r;
+
+ pid = map_cmdline_to_pid[i];
+ if (pid == -1 || pid == NO_CMDLINE_MAP)
+ continue;
+
+ trace_find_cmdline(pid, buf_comm);
+ r = sprintf(buf, "%d %s\n", pid, buf_comm);
+ buf += r;
+ len += r;
+ }
+
+ len = simple_read_from_buffer(ubuf, cnt, ppos,
+ file_buf, len);
+
+ kfree(file_buf);
+ kfree(buf_comm);
+
+ return len;
+}
+
+static const struct file_operations tracing_saved_cmdlines_fops = {
+ .open = tracing_open_generic,
+ .read = tracing_saved_cmdlines_read,
+};
+
static ssize_t
tracing_ctrl_read(struct file *filp, char __user *ubuf,
size_t cnt, loff_t *ppos)
.spd_release = buffer_spd_release,
};
struct buffer_ref *ref;
- int size, i;
+ int entries, size, i;
size_t ret;
if (*ppos & (PAGE_SIZE - 1)) {
len &= PAGE_MASK;
}
- for (i = 0; i < PIPE_BUFFERS && len; i++, len -= PAGE_SIZE) {
+ entries = ring_buffer_entries_cpu(info->tr->buffer, info->cpu);
+
+ for (i = 0; i < PIPE_BUFFERS && len && entries; i++, len -= PAGE_SIZE) {
struct page *page;
int r;
if (!ref)
break;
+ ref->ref = 1;
ref->buffer = info->tr->buffer;
ref->page = ring_buffer_alloc_read_page(ref->buffer);
if (!ref->page) {
}
r = ring_buffer_read_page(ref->buffer, &ref->page,
- len, info->cpu, 0);
+ len, info->cpu, 1);
if (r < 0) {
ring_buffer_free_read_page(ref->buffer,
ref->page);
spd.partial[i].private = (unsigned long)ref;
spd.nr_pages++;
*ppos += PAGE_SIZE;
+
+ entries = ring_buffer_entries_cpu(info->tr->buffer, info->cpu);
}
spd.nr_pages = i;
.llseek = no_llseek,
};
+static ssize_t
+tracing_stats_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ unsigned long cpu = (unsigned long)filp->private_data;
+ struct trace_array *tr = &global_trace;
+ struct trace_seq *s;
+ unsigned long cnt;
+
+ s = kmalloc(sizeof(*s), GFP_ATOMIC);
+ if (!s)
+ return ENOMEM;
+
+ trace_seq_init(s);
+
+ cnt = ring_buffer_entries_cpu(tr->buffer, cpu);
+ trace_seq_printf(s, "entries: %ld\n", cnt);
+
+ cnt = ring_buffer_overrun_cpu(tr->buffer, cpu);
+ trace_seq_printf(s, "overrun: %ld\n", cnt);
+
+ cnt = ring_buffer_commit_overrun_cpu(tr->buffer, cpu);
+ trace_seq_printf(s, "commit overrun: %ld\n", cnt);
+
+ cnt = ring_buffer_nmi_dropped_cpu(tr->buffer, cpu);
+ trace_seq_printf(s, "nmi dropped: %ld\n", cnt);
+
+ count = simple_read_from_buffer(ubuf, count, ppos, s->buffer, s->len);
+
+ kfree(s);
+
+ return count;
+}
+
+static const struct file_operations tracing_stats_fops = {
+ .open = tracing_open_generic,
+ .read = tracing_stats_read,
+};
+
#ifdef CONFIG_DYNAMIC_FTRACE
int __weak ftrace_arch_read_dyn_info(char *buf, int size)
static void tracing_init_debugfs_percpu(long cpu)
{
struct dentry *d_percpu = tracing_dentry_percpu();
- struct dentry *entry, *d_cpu;
+ struct dentry *d_cpu;
/* strlen(cpu) + MAX(log10(cpu)) + '\0' */
char cpu_dir[7];
}
/* per cpu trace_pipe */
- entry = debugfs_create_file("trace_pipe", 0444, d_cpu,
- (void *) cpu, &tracing_pipe_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'trace_pipe' entry\n");
+ trace_create_file("trace_pipe", 0444, d_cpu,
+ (void *) cpu, &tracing_pipe_fops);
/* per cpu trace */
- entry = debugfs_create_file("trace", 0644, d_cpu,
- (void *) cpu, &tracing_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'trace' entry\n");
+ trace_create_file("trace", 0644, d_cpu,
+ (void *) cpu, &tracing_fops);
- entry = debugfs_create_file("trace_pipe_raw", 0444, d_cpu,
- (void *) cpu, &tracing_buffers_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'trace_pipe_raw' entry\n");
+ trace_create_file("trace_pipe_raw", 0444, d_cpu,
+ (void *) cpu, &tracing_buffers_fops);
+
+ trace_create_file("stats", 0444, d_cpu,
+ (void *) cpu, &tracing_stats_fops);
}
#ifdef CONFIG_FTRACE_SELFTEST
.write = trace_options_core_write,
};
+struct dentry *trace_create_file(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ void *data,
+ const struct file_operations *fops)
+{
+ struct dentry *ret;
+
+ ret = debugfs_create_file(name, mode, parent, data, fops);
+ if (!ret)
+ pr_warning("Could not create debugfs '%s' entry\n", name);
+
+ return ret;
+}
+
+
static struct dentry *trace_options_init_dentry(void)
{
struct dentry *d_tracer;
struct tracer_opt *opt)
{
struct dentry *t_options;
- struct dentry *entry;
t_options = trace_options_init_dentry();
if (!t_options)
topt->flags = flags;
topt->opt = opt;
- entry = debugfs_create_file(opt->name, 0644, t_options, topt,
+ topt->entry = trace_create_file(opt->name, 0644, t_options, topt,
&trace_options_fops);
- topt->entry = entry;
-
}
static struct trace_option_dentry *
create_trace_option_core_file(const char *option, long index)
{
struct dentry *t_options;
- struct dentry *entry;
t_options = trace_options_init_dentry();
if (!t_options)
return NULL;
- entry = debugfs_create_file(option, 0644, t_options, (void *)index,
+ return trace_create_file(option, 0644, t_options, (void *)index,
&trace_options_core_fops);
-
- return entry;
}
static __init void create_trace_options_dir(void)
{
struct dentry *t_options;
- struct dentry *entry;
int i;
t_options = trace_options_init_dentry();
if (!t_options)
return;
- for (i = 0; trace_options[i]; i++) {
- entry = create_trace_option_core_file(trace_options[i], i);
- if (!entry)
- pr_warning("Could not create debugfs %s entry\n",
- trace_options[i]);
- }
+ for (i = 0; trace_options[i]; i++)
+ create_trace_option_core_file(trace_options[i], i);
}
static __init int tracer_init_debugfs(void)
{
struct dentry *d_tracer;
- struct dentry *entry;
int cpu;
d_tracer = tracing_init_dentry();
- entry = debugfs_create_file("tracing_enabled", 0644, d_tracer,
- &global_trace, &tracing_ctrl_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'tracing_enabled' entry\n");
+ trace_create_file("tracing_enabled", 0644, d_tracer,
+ &global_trace, &tracing_ctrl_fops);
- entry = debugfs_create_file("trace_options", 0644, d_tracer,
- NULL, &tracing_iter_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'trace_options' entry\n");
+ trace_create_file("trace_options", 0644, d_tracer,
+ NULL, &tracing_iter_fops);
- create_trace_options_dir();
+ trace_create_file("tracing_cpumask", 0644, d_tracer,
+ NULL, &tracing_cpumask_fops);
+
+ trace_create_file("trace", 0644, d_tracer,
+ (void *) TRACE_PIPE_ALL_CPU, &tracing_fops);
+
+ trace_create_file("available_tracers", 0444, d_tracer,
+ &global_trace, &show_traces_fops);
- entry = debugfs_create_file("tracing_cpumask", 0644, d_tracer,
- NULL, &tracing_cpumask_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'tracing_cpumask' entry\n");
-
- entry = debugfs_create_file("trace", 0644, d_tracer,
- (void *) TRACE_PIPE_ALL_CPU, &tracing_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'trace' entry\n");
-
- entry = debugfs_create_file("available_tracers", 0444, d_tracer,
- &global_trace, &show_traces_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'available_tracers' entry\n");
-
- entry = debugfs_create_file("current_tracer", 0444, d_tracer,
- &global_trace, &set_tracer_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'current_tracer' entry\n");
-
- entry = debugfs_create_file("tracing_max_latency", 0644, d_tracer,
- &tracing_max_latency,
- &tracing_max_lat_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'tracing_max_latency' entry\n");
-
- entry = debugfs_create_file("tracing_thresh", 0644, d_tracer,
- &tracing_thresh, &tracing_max_lat_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'tracing_thresh' entry\n");
- entry = debugfs_create_file("README", 0644, d_tracer,
- NULL, &tracing_readme_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'README' entry\n");
-
- entry = debugfs_create_file("trace_pipe", 0444, d_tracer,
+ trace_create_file("current_tracer", 0644, d_tracer,
+ &global_trace, &set_tracer_fops);
+
+ trace_create_file("tracing_max_latency", 0644, d_tracer,
+ &tracing_max_latency, &tracing_max_lat_fops);
+
+ trace_create_file("tracing_thresh", 0644, d_tracer,
+ &tracing_thresh, &tracing_max_lat_fops);
+
+ trace_create_file("README", 0444, d_tracer,
+ NULL, &tracing_readme_fops);
+
+ trace_create_file("trace_pipe", 0444, d_tracer,
(void *) TRACE_PIPE_ALL_CPU, &tracing_pipe_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'trace_pipe' entry\n");
-
- entry = debugfs_create_file("buffer_size_kb", 0644, d_tracer,
- &global_trace, &tracing_entries_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'buffer_size_kb' entry\n");
-
- entry = debugfs_create_file("trace_marker", 0220, d_tracer,
- NULL, &tracing_mark_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'trace_marker' entry\n");
+
+ trace_create_file("buffer_size_kb", 0644, d_tracer,
+ &global_trace, &tracing_entries_fops);
+
+ trace_create_file("trace_marker", 0220, d_tracer,
+ NULL, &tracing_mark_fops);
+
+ trace_create_file("saved_cmdlines", 0444, d_tracer,
+ NULL, &tracing_saved_cmdlines_fops);
#ifdef CONFIG_DYNAMIC_FTRACE
- entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer,
- &ftrace_update_tot_cnt,
- &tracing_dyn_info_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'dyn_ftrace_total_info' entry\n");
+ trace_create_file("dyn_ftrace_total_info", 0444, d_tracer,
+ &ftrace_update_tot_cnt, &tracing_dyn_info_fops);
#endif
#ifdef CONFIG_SYSPROF_TRACER
init_tracer_sysprof_debugfs(d_tracer);
#endif
+ create_trace_options_dir();
+
for_each_tracing_cpu(cpu)
tracing_init_debugfs_percpu(cpu);
static void __ftrace_dump(bool disable_tracing)
{
- static DEFINE_SPINLOCK(ftrace_dump_lock);
+ static raw_spinlock_t ftrace_dump_lock =
+ (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
/* use static because iter can be a bit big for the stack */
static struct trace_iterator iter;
unsigned int old_userobj;
int cnt = 0, cpu;
/* only one dump */
- spin_lock_irqsave(&ftrace_dump_lock, flags);
+ local_irq_save(flags);
+ __raw_spin_lock(&ftrace_dump_lock);
if (dump_ran)
goto out;
}
out:
- spin_unlock_irqrestore(&ftrace_dump_lock, flags);
+ __raw_spin_unlock(&ftrace_dump_lock);
+ local_irq_restore(flags);
}
/* By default: disable tracing after the dump */
#include <linux/mmiotrace.h>
#include <linux/ftrace.h>
#include <trace/boot.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
#include <trace/power.h>
+#include <linux/trace_seq.h>
+#include <linux/ftrace_event.h>
+
enum trace_type {
__TRACE_FIRST_TYPE = 0,
__TRACE_LAST_TYPE,
};
-/*
- * The trace entry - the most basic unit of tracing. This is what
- * is printed in the end as a single line in the trace output, such as:
- *
- * bash-15816 [01] 235.197585: idle_cpu <- irq_enter
- */
-struct trace_entry {
- unsigned char type;
- unsigned char flags;
- unsigned char preempt_count;
- int pid;
- int tgid;
-};
-
/*
* Function trace entry - function address and parent function addres:
*/
char comm[TASK_COMM_LEN];
};
-struct trace_iterator;
-
/*
* The trace array - an array of per-CPU trace arrays. This is the
* highest level data structure that individual tracers deal with.
__ftrace_bad_type(); \
} while (0)
-/* Return values for print_line callback */
-enum print_line_t {
- TRACE_TYPE_PARTIAL_LINE = 0, /* Retry after flushing the seq */
- TRACE_TYPE_HANDLED = 1,
- TRACE_TYPE_UNHANDLED = 2, /* Relay to other output functions */
- TRACE_TYPE_NO_CONSUME = 3 /* Handled but ask to not consume */
-};
-
-
/*
* An option specific to a tracer. This is a boolean value.
* The bit is the bit index that sets its value on the
struct tracer_stat *stats;
};
-struct trace_seq {
- unsigned char buffer[PAGE_SIZE];
- unsigned int len;
- unsigned int readpos;
-};
-
-static inline void
-trace_seq_init(struct trace_seq *s)
-{
- s->len = 0;
- s->readpos = 0;
-}
-
#define TRACE_PIPE_ALL_CPU -1
-/*
- * Trace iterator - used by printout routines who present trace
- * results to users and which routines might sleep, etc:
- */
-struct trace_iterator {
- struct trace_array *tr;
- struct tracer *trace;
- void *private;
- int cpu_file;
- struct mutex mutex;
- struct ring_buffer_iter *buffer_iter[NR_CPUS];
-
- /* The below is zeroed out in pipe_read */
- struct trace_seq seq;
- struct trace_entry *ent;
- int cpu;
- u64 ts;
-
- unsigned long iter_flags;
- loff_t pos;
- long idx;
-
- cpumask_var_t started;
-};
-
int tracer_init(struct tracer *t, struct trace_array *tr);
int tracing_is_enabled(void);
void trace_wake_up(void);
void tracing_reset(struct trace_array *tr, int cpu);
void tracing_reset_online_cpus(struct trace_array *tr);
+void tracing_reset_current(int cpu);
+void tracing_reset_current_online_cpus(void);
int tracing_open_generic(struct inode *inode, struct file *filp);
+struct dentry *trace_create_file(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ void *data,
+ const struct file_operations *fops);
+
struct dentry *tracing_init_dentry(void);
void init_tracer_sysprof_debugfs(struct dentry *d_tracer);
struct ring_buffer_event;
struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
- unsigned char type,
+ int type,
unsigned long len,
unsigned long flags,
int pc);
struct ring_buffer_event *event,
unsigned long flags, int pc);
-struct ring_buffer_event *
-trace_current_buffer_lock_reserve(unsigned char type, unsigned long len,
- unsigned long flags, int pc);
-void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
- unsigned long flags, int pc);
-void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
- unsigned long flags, int pc);
-
struct trace_entry *tracing_get_trace_entry(struct trace_array *tr,
struct trace_array_cpu *data);
struct task_struct *prev,
struct task_struct *next,
unsigned long flags, int pc);
-void tracing_record_cmdline(struct task_struct *tsk);
void tracing_sched_wakeup_trace(struct trace_array *tr,
struct task_struct *wakee,
/* Standard output formatting function used for function return traces */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern enum print_line_t print_graph_function(struct trace_iterator *iter);
+extern enum print_line_t
+trace_print_graph_duration(unsigned long long duration, struct trace_seq *s);
#ifdef CONFIG_DYNAMIC_FTRACE
/* TODO: make this variable */
return 1;
}
#endif /* CONFIG_DYNAMIC_FTRACE */
-
#else /* CONFIG_FUNCTION_GRAPH_TRACER */
static inline enum print_line_t
print_graph_function(struct trace_iterator *iter)
TRACE_ITER_LATENCY_FMT = 0x40000,
TRACE_ITER_GLOBAL_CLK = 0x80000,
TRACE_ITER_SLEEP_TIME = 0x100000,
+ TRACE_ITER_GRAPH_TIME = 0x200000,
};
/*
char *type;
int offset;
int size;
+ int is_signed;
};
-struct ftrace_event_call {
- char *name;
- char *system;
- struct dentry *dir;
- int enabled;
- int (*regfunc)(void);
- void (*unregfunc)(void);
- int id;
- int (*raw_init)(void);
- int (*show_format)(struct trace_seq *s);
- int (*define_fields)(void);
- struct list_head fields;
+struct event_filter {
+ int n_preds;
struct filter_pred **preds;
-
-#ifdef CONFIG_EVENT_PROFILE
- atomic_t profile_count;
- int (*profile_enable)(struct ftrace_event_call *);
- void (*profile_disable)(struct ftrace_event_call *);
-#endif
+ char *filter_string;
};
struct event_subsystem {
struct list_head list;
const char *name;
struct dentry *entry;
- struct filter_pred **preds;
+ void *filter;
};
-#define events_for_each(event) \
- for (event = __start_ftrace_events; \
- (unsigned long)event < (unsigned long)__stop_ftrace_events; \
- event++)
-
-#define MAX_FILTER_PRED 8
-
struct filter_pred;
-typedef int (*filter_pred_fn_t) (struct filter_pred *pred, void *event);
+typedef int (*filter_pred_fn_t) (struct filter_pred *pred, void *event,
+ int val1, int val2);
struct filter_pred {
filter_pred_fn_t fn;
u64 val;
- char *str_val;
+ char str_val[MAX_FILTER_STR_VAL];
int str_len;
char *field_name;
int offset;
int not;
- int or;
- int compound;
- int clear;
+ int op;
+ int pop_n;
};
-int trace_define_field(struct ftrace_event_call *call, char *type,
- char *name, int offset, int size);
-extern void filter_free_pred(struct filter_pred *pred);
-extern void filter_print_preds(struct filter_pred **preds,
+extern void print_event_filter(struct ftrace_event_call *call,
struct trace_seq *s);
-extern int filter_parse(char **pbuf, struct filter_pred *pred);
-extern int filter_add_pred(struct ftrace_event_call *call,
- struct filter_pred *pred);
-extern void filter_free_preds(struct ftrace_event_call *call);
-extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
-extern void filter_free_subsystem_preds(struct event_subsystem *system);
-extern int filter_add_subsystem_pred(struct event_subsystem *system,
- struct filter_pred *pred);
-
-void event_trace_printk(unsigned long ip, const char *fmt, ...);
-extern struct ftrace_event_call __start_ftrace_events[];
-extern struct ftrace_event_call __stop_ftrace_events[];
-
-#define for_each_event(event) \
- for (event = __start_ftrace_events; \
- (unsigned long)event < (unsigned long)__stop_ftrace_events; \
- event++)
+extern int apply_event_filter(struct ftrace_event_call *call,
+ char *filter_string);
+extern int apply_subsystem_event_filter(struct event_subsystem *system,
+ char *filter_string);
+extern void print_subsystem_event_filter(struct event_subsystem *system,
+ struct trace_seq *s);
+
+static inline int
+filter_check_discard(struct ftrace_event_call *call, void *rec,
+ struct ring_buffer *buffer,
+ struct ring_buffer_event *event)
+{
+ if (unlikely(call->filter_active) && !filter_match_preds(call, rec)) {
+ ring_buffer_discard_commit(buffer, event);
+ return 1;
+ }
+
+ return 0;
+}
+
+#define DEFINE_COMPARISON_PRED(type) \
+static int filter_pred_##type(struct filter_pred *pred, void *event, \
+ int val1, int val2) \
+{ \
+ type *addr = (type *)(event + pred->offset); \
+ type val = (type)pred->val; \
+ int match = 0; \
+ \
+ switch (pred->op) { \
+ case OP_LT: \
+ match = (*addr < val); \
+ break; \
+ case OP_LE: \
+ match = (*addr <= val); \
+ break; \
+ case OP_GT: \
+ match = (*addr > val); \
+ break; \
+ case OP_GE: \
+ match = (*addr >= val); \
+ break; \
+ default: \
+ break; \
+ } \
+ \
+ return match; \
+}
+
+#define DEFINE_EQUALITY_PRED(size) \
+static int filter_pred_##size(struct filter_pred *pred, void *event, \
+ int val1, int val2) \
+{ \
+ u##size *addr = (u##size *)(event + pred->offset); \
+ u##size val = (u##size)pred->val; \
+ int match; \
+ \
+ match = (val == *addr) ^ pred->not; \
+ \
+ return match; \
+}
+
+extern struct mutex event_mutex;
+extern struct list_head ftrace_events;
extern const char *__start___trace_bprintk_fmt[];
extern const char *__stop___trace_bprintk_fmt[];
-/*
- * The double __builtin_constant_p is because gcc will give us an error
- * if we try to allocate the static variable to fmt if it is not a
- * constant. Even with the outer if statement optimizing out.
- */
-#define event_trace_printk(ip, fmt, args...) \
-do { \
- __trace_printk_check_format(fmt, ##args); \
- tracing_record_cmdline(current); \
- if (__builtin_constant_p(fmt)) { \
- static const char *trace_printk_fmt \
- __attribute__((section("__trace_printk_fmt"))) = \
- __builtin_constant_p(fmt) ? fmt : NULL; \
- \
- __trace_bprintk(ip, trace_printk_fmt, ##args); \
- } else \
- __trace_printk(ip, fmt, ##args); \
-} while (0)
+#undef TRACE_EVENT_FORMAT
+#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt) \
+ extern struct ftrace_event_call event_##call;
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, tpfmt)
+#include "trace_event_types.h"
#endif /* _LINUX_KERNEL_TRACE_H */
#include <linux/debugfs.h>
#include <linux/ftrace.h>
#include <linux/kallsyms.h>
+#include <linux/time.h>
#include "trace.h"
#include "trace_output.h"
trace_assign_type(field, entry);
call = &field->boot_call;
ts = iter->ts;
- nsec_rem = do_div(ts, 1000000000);
+ nsec_rem = do_div(ts, NSEC_PER_SEC);
ret = trace_seq_printf(s, "[%5ld.%09ld] calling %s @ %i\n",
(unsigned long)ts, nsec_rem, call->func, call->caller);
trace_assign_type(field, entry);
init_ret = &field->boot_ret;
ts = iter->ts;
- nsec_rem = do_div(ts, 1000000000);
+ nsec_rem = do_div(ts, NSEC_PER_SEC);
ret = trace_seq_printf(s, "[%5ld.%09ld] initcall %s "
"returned %d after %llu msecs\n",
static void
probe_likely_condition(struct ftrace_branch_data *f, int val, int expect)
{
+ struct ftrace_event_call *call = &event_branch;
struct trace_array *tr = branch_tracer;
struct ring_buffer_event *event;
struct trace_branch *entry;
entry->line = f->line;
entry->correct = val == expect;
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ ring_buffer_unlock_commit(tr->buffer, event);
out:
atomic_dec(&tr->data[cpu]->disabled);
return 0;
}
-static void *annotated_branch_stat_start(void)
+static void *annotated_branch_stat_start(struct tracer_stat *trace)
{
return __start_annotated_branch_profile;
}
return 0;
}
-static void *all_branch_stat_start(void)
+static void *all_branch_stat_start(struct tracer_stat *trace)
{
return __start_branch_profile;
}
int ftrace_profile_enable(int event_id)
{
struct ftrace_event_call *event;
+ int ret = -EINVAL;
- for_each_event(event) {
- if (event->id == event_id)
- return event->profile_enable(event);
+ mutex_lock(&event_mutex);
+ list_for_each_entry(event, &ftrace_events, list) {
+ if (event->id == event_id) {
+ ret = event->profile_enable(event);
+ break;
+ }
}
+ mutex_unlock(&event_mutex);
- return -EINVAL;
+ return ret;
}
void ftrace_profile_disable(int event_id)
{
struct ftrace_event_call *event;
- for_each_event(event) {
- if (event->id == event_id)
- return event->profile_disable(event);
+ mutex_lock(&event_mutex);
+ list_for_each_entry(event, &ftrace_events, list) {
+ if (event->id == event_id) {
+ event->profile_disable(event);
+ break;
+ }
}
+ mutex_unlock(&event_mutex);
}
-
TP_RAW_FMT("%u:%u:%u ==+ %u:%u:%u [%03u]")
);
-TRACE_EVENT_FORMAT(special, TRACE_SPECIAL, special_entry, ignore,
+TRACE_EVENT_FORMAT_NOFILTER(special, TRACE_SPECIAL, special_entry, ignore,
TRACE_STRUCT(
TRACE_FIELD(unsigned long, arg1, arg1)
TRACE_FIELD(unsigned long, arg2, arg2)
TRACE_EVENT_FORMAT(branch, TRACE_BRANCH, trace_branch, ignore,
TRACE_STRUCT(
TRACE_FIELD(unsigned int, line, line)
- TRACE_FIELD_SPECIAL(char func[TRACE_FUNC_SIZE+1], func, func)
- TRACE_FIELD_SPECIAL(char file[TRACE_FUNC_SIZE+1], file, file)
+ TRACE_FIELD_SPECIAL(char func[TRACE_FUNC_SIZE+1], func,
+ TRACE_FUNC_SIZE+1, func)
+ TRACE_FIELD_SPECIAL(char file[TRACE_FUNC_SIZE+1], file,
+ TRACE_FUNC_SIZE+1, file)
TRACE_FIELD(char, correct, correct)
),
TP_RAW_FMT("%u:%s:%s (%u)")
TRACE_EVENT_FORMAT(power, TRACE_POWER, trace_power, ignore,
TRACE_STRUCT(
- TRACE_FIELD(ktime_t, state_data.stamp, stamp)
- TRACE_FIELD(ktime_t, state_data.end, end)
+ TRACE_FIELD_SIGN(ktime_t, state_data.stamp, stamp, 1)
+ TRACE_FIELD_SIGN(ktime_t, state_data.end, end, 1)
TRACE_FIELD(int, state_data.type, type)
TRACE_FIELD(int, state_data.state, state)
),
*
*/
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ctype.h>
+#include <linux/delay.h>
#include "trace_output.h"
#define TRACE_SYSTEM "TRACE_SYSTEM"
-static DEFINE_MUTEX(event_mutex);
+DEFINE_MUTEX(event_mutex);
+
+LIST_HEAD(ftrace_events);
int trace_define_field(struct ftrace_event_call *call, char *type,
- char *name, int offset, int size)
+ char *name, int offset, int size, int is_signed)
{
struct ftrace_event_field *field;
field->offset = offset;
field->size = size;
+ field->is_signed = is_signed;
list_add(&field->link, &call->fields);
return 0;
return -ENOMEM;
}
+EXPORT_SYMBOL_GPL(trace_define_field);
-static void ftrace_clear_events(void)
+#ifdef CONFIG_MODULES
+
+static void trace_destroy_fields(struct ftrace_event_call *call)
{
- struct ftrace_event_call *call = (void *)__start_ftrace_events;
+ struct ftrace_event_field *field, *next;
+ list_for_each_entry_safe(field, next, &call->fields, link) {
+ list_del(&field->link);
+ kfree(field->type);
+ kfree(field->name);
+ kfree(field);
+ }
+}
+
+#endif /* CONFIG_MODULES */
+
+static void ftrace_clear_events(void)
+{
+ struct ftrace_event_call *call;
- while ((unsigned long)call < (unsigned long)__stop_ftrace_events) {
+ mutex_lock(&event_mutex);
+ list_for_each_entry(call, &ftrace_events, list) {
if (call->enabled) {
call->enabled = 0;
call->unregfunc();
}
- call++;
}
+ mutex_unlock(&event_mutex);
}
static void ftrace_event_enable_disable(struct ftrace_event_call *call,
static int ftrace_set_clr_event(char *buf, int set)
{
- struct ftrace_event_call *call = __start_ftrace_events;
+ struct ftrace_event_call *call;
char *event = NULL, *sub = NULL, *match;
int ret = -EINVAL;
}
mutex_lock(&event_mutex);
- for_each_event(call) {
+ list_for_each_entry(call, &ftrace_events, list) {
if (!call->name || !call->regfunc)
continue;
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct ftrace_event_call *call = m->private;
- struct ftrace_event_call *next = call;
+ struct list_head *list = m->private;
+ struct ftrace_event_call *call;
(*pos)++;
for (;;) {
- if ((unsigned long)call >= (unsigned long)__stop_ftrace_events)
+ if (list == &ftrace_events)
return NULL;
+ call = list_entry(list, struct ftrace_event_call, list);
+
/*
* The ftrace subsystem is for showing formats only.
* They can not be enabled or disabled via the event files.
if (call->regfunc)
break;
- call++;
- next = call;
+ list = list->next;
}
- m->private = ++next;
+ m->private = list->next;
return call;
}
static void *t_start(struct seq_file *m, loff_t *pos)
{
+ mutex_lock(&event_mutex);
+ if (*pos == 0)
+ m->private = ftrace_events.next;
return t_next(m, NULL, pos);
}
static void *
s_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct ftrace_event_call *call = m->private;
- struct ftrace_event_call *next;
+ struct list_head *list = m->private;
+ struct ftrace_event_call *call;
(*pos)++;
retry:
- if ((unsigned long)call >= (unsigned long)__stop_ftrace_events)
+ if (list == &ftrace_events)
return NULL;
+ call = list_entry(list, struct ftrace_event_call, list);
+
if (!call->enabled) {
- call++;
+ list = list->next;
goto retry;
}
- next = call;
- m->private = ++next;
+ m->private = list->next;
return call;
}
static void *s_start(struct seq_file *m, loff_t *pos)
{
+ mutex_lock(&event_mutex);
+ if (*pos == 0)
+ m->private = ftrace_events.next;
return s_next(m, NULL, pos);
}
static void t_stop(struct seq_file *m, void *p)
{
+ mutex_unlock(&event_mutex);
}
static int
ftrace_event_seq_open(struct inode *inode, struct file *file)
{
- int ret;
const struct seq_operations *seq_ops;
if ((file->f_mode & FMODE_WRITE) &&
ftrace_clear_events();
seq_ops = inode->i_private;
- ret = seq_open(file, seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
-
- m->private = __start_ftrace_events;
- }
- return ret;
+ return seq_open(file, seq_ops);
}
static ssize_t
return cnt;
}
+static ssize_t
+system_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
+ loff_t *ppos)
+{
+ const char *system = filp->private_data;
+ struct ftrace_event_call *call;
+ char buf[2];
+ int set = -1;
+ int all = 0;
+ int ret;
+
+ if (system[0] == '*')
+ all = 1;
+
+ mutex_lock(&event_mutex);
+ list_for_each_entry(call, &ftrace_events, list) {
+ if (!call->name || !call->regfunc)
+ continue;
+
+ if (!all && strcmp(call->system, system) != 0)
+ continue;
+
+ /*
+ * We need to find out if all the events are set
+ * or if all events or cleared, or if we have
+ * a mixture.
+ */
+ if (call->enabled) {
+ switch (set) {
+ case -1:
+ set = 1;
+ break;
+ case 0:
+ set = 2;
+ break;
+ }
+ } else {
+ switch (set) {
+ case -1:
+ set = 0;
+ break;
+ case 1:
+ set = 2;
+ break;
+ }
+ }
+ /*
+ * If we have a mixture, no need to look further.
+ */
+ if (set == 2)
+ break;
+ }
+ mutex_unlock(&event_mutex);
+
+ buf[1] = '\n';
+ switch (set) {
+ case 0:
+ buf[0] = '0';
+ break;
+ case 1:
+ buf[0] = '1';
+ break;
+ case 2:
+ buf[0] = 'X';
+ break;
+ default:
+ buf[0] = '?';
+ }
+
+ ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, 2);
+
+ return ret;
+}
+
+static ssize_t
+system_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
+ loff_t *ppos)
+{
+ const char *system = filp->private_data;
+ unsigned long val;
+ char *command;
+ char buf[64];
+ ssize_t ret;
+
+ if (cnt >= sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, cnt))
+ return -EFAULT;
+
+ buf[cnt] = 0;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ ret = tracing_update_buffers();
+ if (ret < 0)
+ return ret;
+
+ switch (val) {
+ case 0:
+ case 1:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ command = kstrdup(system, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ ret = ftrace_set_clr_event(command, val);
+ if (ret)
+ goto out_free;
+
+ ret = cnt;
+
+ out_free:
+ kfree(command);
+
+ *ppos += cnt;
+
+ return ret;
+}
+
+extern char *__bad_type_size(void);
+
#undef FIELD
#define FIELD(type, name) \
+ sizeof(type) != sizeof(field.name) ? __bad_type_size() : \
#type, "common_" #name, offsetof(typeof(field), name), \
sizeof(field.name)
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\n",
- FIELD(unsigned char, type),
+ FIELD(unsigned short, type),
FIELD(unsigned char, flags),
FIELD(unsigned char, preempt_count),
FIELD(int, pid),
trace_seq_init(s);
- filter_print_preds(call->preds, s);
+ print_event_filter(call, s);
r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
kfree(s);
loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
- char buf[64], *pbuf = buf;
- struct filter_pred *pred;
+ char *buf;
int err;
- if (cnt >= sizeof(buf))
+ if (cnt >= PAGE_SIZE)
return -EINVAL;
- if (copy_from_user(&buf, ubuf, cnt))
- return -EFAULT;
- buf[cnt] = '\0';
-
- pred = kzalloc(sizeof(*pred), GFP_KERNEL);
- if (!pred)
+ buf = (char *)__get_free_page(GFP_TEMPORARY);
+ if (!buf)
return -ENOMEM;
- err = filter_parse(&pbuf, pred);
- if (err < 0) {
- filter_free_pred(pred);
- return err;
- }
-
- if (pred->clear) {
- filter_free_preds(call);
- filter_free_pred(pred);
- return cnt;
+ if (copy_from_user(buf, ubuf, cnt)) {
+ free_page((unsigned long) buf);
+ return -EFAULT;
}
+ buf[cnt] = '\0';
- err = filter_add_pred(call, pred);
- if (err < 0) {
- filter_free_pred(pred);
+ err = apply_event_filter(call, buf);
+ free_page((unsigned long) buf);
+ if (err < 0)
return err;
- }
*ppos += cnt;
trace_seq_init(s);
- filter_print_preds(system->preds, s);
+ print_subsystem_event_filter(system, s);
r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
kfree(s);
loff_t *ppos)
{
struct event_subsystem *system = filp->private_data;
- char buf[64], *pbuf = buf;
- struct filter_pred *pred;
+ char *buf;
int err;
- if (cnt >= sizeof(buf))
+ if (cnt >= PAGE_SIZE)
return -EINVAL;
- if (copy_from_user(&buf, ubuf, cnt))
- return -EFAULT;
- buf[cnt] = '\0';
-
- pred = kzalloc(sizeof(*pred), GFP_KERNEL);
- if (!pred)
+ buf = (char *)__get_free_page(GFP_TEMPORARY);
+ if (!buf)
return -ENOMEM;
- err = filter_parse(&pbuf, pred);
- if (err < 0) {
- filter_free_pred(pred);
- return err;
- }
-
- if (pred->clear) {
- filter_free_subsystem_preds(system);
- filter_free_pred(pred);
- return cnt;
+ if (copy_from_user(buf, ubuf, cnt)) {
+ free_page((unsigned long) buf);
+ return -EFAULT;
}
+ buf[cnt] = '\0';
- err = filter_add_subsystem_pred(system, pred);
- if (err < 0) {
- filter_free_subsystem_preds(system);
- filter_free_pred(pred);
+ err = apply_subsystem_event_filter(system, buf);
+ free_page((unsigned long) buf);
+ if (err < 0)
return err;
- }
*ppos += cnt;
return cnt;
}
+static ssize_t
+show_header(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
+{
+ int (*func)(struct trace_seq *s) = filp->private_data;
+ struct trace_seq *s;
+ int r;
+
+ if (*ppos)
+ return 0;
+
+ s = kmalloc(sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+
+ trace_seq_init(s);
+
+ func(s);
+ r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
+
+ kfree(s);
+
+ return r;
+}
+
static const struct seq_operations show_event_seq_ops = {
.start = t_start,
.next = t_next,
.write = subsystem_filter_write,
};
+static const struct file_operations ftrace_system_enable_fops = {
+ .open = tracing_open_generic,
+ .read = system_enable_read,
+ .write = system_enable_write,
+};
+
+static const struct file_operations ftrace_show_header_fops = {
+ .open = tracing_open_generic,
+ .read = show_header,
+};
+
static struct dentry *event_trace_events_dir(void)
{
static struct dentry *d_tracer;
event_subsystem_dir(const char *name, struct dentry *d_events)
{
struct event_subsystem *system;
+ struct dentry *entry;
/* First see if we did not already create this dir */
list_for_each_entry(system, &event_subsystems, list) {
return d_events;
}
- system->name = name;
+ system->name = kstrdup(name, GFP_KERNEL);
+ if (!system->name) {
+ debugfs_remove(system->entry);
+ kfree(system);
+ return d_events;
+ }
+
list_add(&system->list, &event_subsystems);
- system->preds = NULL;
+ system->filter = NULL;
+
+ system->filter = kzalloc(sizeof(struct event_filter), GFP_KERNEL);
+ if (!system->filter) {
+ pr_warning("Could not allocate filter for subsystem "
+ "'%s'\n", name);
+ return system->entry;
+ }
+
+ entry = debugfs_create_file("filter", 0644, system->entry, system,
+ &ftrace_subsystem_filter_fops);
+ if (!entry) {
+ kfree(system->filter);
+ system->filter = NULL;
+ pr_warning("Could not create debugfs "
+ "'%s/filter' entry\n", name);
+ }
+
+ entry = trace_create_file("enable", 0644, system->entry,
+ (void *)system->name,
+ &ftrace_system_enable_fops);
return system->entry;
}
static int
-event_create_dir(struct ftrace_event_call *call, struct dentry *d_events)
+event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
+ const struct file_operations *id,
+ const struct file_operations *enable,
+ const struct file_operations *filter,
+ const struct file_operations *format)
{
struct dentry *entry;
int ret;
* If the trace point header did not define TRACE_SYSTEM
* then the system would be called "TRACE_SYSTEM".
*/
- if (strcmp(call->system, "TRACE_SYSTEM") != 0)
+ if (strcmp(call->system, TRACE_SYSTEM) != 0)
d_events = event_subsystem_dir(call->system, d_events);
if (call->raw_init) {
return -1;
}
- if (call->regfunc) {
- entry = debugfs_create_file("enable", 0644, call->dir, call,
- &ftrace_enable_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'%s/enable' entry\n", call->name);
- }
+ if (call->regfunc)
+ entry = trace_create_file("enable", 0644, call->dir, call,
+ enable);
- if (call->id) {
- entry = debugfs_create_file("id", 0444, call->dir, call,
- &ftrace_event_id_fops);
- if (!entry)
- pr_warning("Could not create debugfs '%s/id' entry\n",
- call->name);
- }
+ if (call->id)
+ entry = trace_create_file("id", 0444, call->dir, call,
+ id);
if (call->define_fields) {
ret = call->define_fields();
" events/%s\n", call->name);
return ret;
}
- entry = debugfs_create_file("filter", 0644, call->dir, call,
- &ftrace_event_filter_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'%s/filter' entry\n", call->name);
+ entry = trace_create_file("filter", 0644, call->dir, call,
+ filter);
}
/* A trace may not want to export its format */
if (!call->show_format)
return 0;
- entry = debugfs_create_file("format", 0444, call->dir, call,
- &ftrace_event_format_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'%s/format' entry\n", call->name);
+ entry = trace_create_file("format", 0444, call->dir, call,
+ format);
+
+ return 0;
+}
+
+#define for_each_event(event, start, end) \
+ for (event = start; \
+ (unsigned long)event < (unsigned long)end; \
+ event++)
+
+#ifdef CONFIG_MODULES
+
+static LIST_HEAD(ftrace_module_file_list);
+
+/*
+ * Modules must own their file_operations to keep up with
+ * reference counting.
+ */
+struct ftrace_module_file_ops {
+ struct list_head list;
+ struct module *mod;
+ struct file_operations id;
+ struct file_operations enable;
+ struct file_operations format;
+ struct file_operations filter;
+};
+
+static struct ftrace_module_file_ops *
+trace_create_file_ops(struct module *mod)
+{
+ struct ftrace_module_file_ops *file_ops;
+
+ /*
+ * This is a bit of a PITA. To allow for correct reference
+ * counting, modules must "own" their file_operations.
+ * To do this, we allocate the file operations that will be
+ * used in the event directory.
+ */
+
+ file_ops = kmalloc(sizeof(*file_ops), GFP_KERNEL);
+ if (!file_ops)
+ return NULL;
+
+ file_ops->mod = mod;
+
+ file_ops->id = ftrace_event_id_fops;
+ file_ops->id.owner = mod;
+
+ file_ops->enable = ftrace_enable_fops;
+ file_ops->enable.owner = mod;
+
+ file_ops->filter = ftrace_event_filter_fops;
+ file_ops->filter.owner = mod;
+
+ file_ops->format = ftrace_event_format_fops;
+ file_ops->format.owner = mod;
+
+ list_add(&file_ops->list, &ftrace_module_file_list);
+
+ return file_ops;
+}
+
+static void trace_module_add_events(struct module *mod)
+{
+ struct ftrace_module_file_ops *file_ops = NULL;
+ struct ftrace_event_call *call, *start, *end;
+ struct dentry *d_events;
+
+ start = mod->trace_events;
+ end = mod->trace_events + mod->num_trace_events;
+
+ if (start == end)
+ return;
+
+ d_events = event_trace_events_dir();
+ if (!d_events)
+ return;
+
+ for_each_event(call, start, end) {
+ /* The linker may leave blanks */
+ if (!call->name)
+ continue;
+
+ /*
+ * This module has events, create file ops for this module
+ * if not already done.
+ */
+ if (!file_ops) {
+ file_ops = trace_create_file_ops(mod);
+ if (!file_ops)
+ return;
+ }
+ call->mod = mod;
+ list_add(&call->list, &ftrace_events);
+ event_create_dir(call, d_events,
+ &file_ops->id, &file_ops->enable,
+ &file_ops->filter, &file_ops->format);
+ }
+}
+
+static void trace_module_remove_events(struct module *mod)
+{
+ struct ftrace_module_file_ops *file_ops;
+ struct ftrace_event_call *call, *p;
+ bool found = false;
+
+ list_for_each_entry_safe(call, p, &ftrace_events, list) {
+ if (call->mod == mod) {
+ found = true;
+ if (call->enabled) {
+ call->enabled = 0;
+ call->unregfunc();
+ }
+ if (call->event)
+ unregister_ftrace_event(call->event);
+ debugfs_remove_recursive(call->dir);
+ list_del(&call->list);
+ trace_destroy_fields(call);
+ destroy_preds(call);
+ }
+ }
+
+ /* Now free the file_operations */
+ list_for_each_entry(file_ops, &ftrace_module_file_list, list) {
+ if (file_ops->mod == mod)
+ break;
+ }
+ if (&file_ops->list != &ftrace_module_file_list) {
+ list_del(&file_ops->list);
+ kfree(file_ops);
+ }
+
+ /*
+ * It is safest to reset the ring buffer if the module being unloaded
+ * registered any events.
+ */
+ if (found)
+ tracing_reset_current_online_cpus();
+}
+
+static int trace_module_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct module *mod = data;
+ mutex_lock(&event_mutex);
+ switch (val) {
+ case MODULE_STATE_COMING:
+ trace_module_add_events(mod);
+ break;
+ case MODULE_STATE_GOING:
+ trace_module_remove_events(mod);
+ break;
+ }
+ mutex_unlock(&event_mutex);
+
+ return 0;
+}
+#else
+static int trace_module_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
return 0;
}
+#endif /* CONFIG_MODULES */
+
+struct notifier_block trace_module_nb = {
+ .notifier_call = trace_module_notify,
+ .priority = 0,
+};
+
+extern struct ftrace_event_call __start_ftrace_events[];
+extern struct ftrace_event_call __stop_ftrace_events[];
static __init int event_trace_init(void)
{
- struct ftrace_event_call *call = __start_ftrace_events;
+ struct ftrace_event_call *call;
struct dentry *d_tracer;
struct dentry *entry;
struct dentry *d_events;
+ int ret;
d_tracer = tracing_init_dentry();
if (!d_tracer)
if (!d_events)
return 0;
- for_each_event(call) {
+ /* ring buffer internal formats */
+ trace_create_file("header_page", 0444, d_events,
+ ring_buffer_print_page_header,
+ &ftrace_show_header_fops);
+
+ trace_create_file("header_event", 0444, d_events,
+ ring_buffer_print_entry_header,
+ &ftrace_show_header_fops);
+
+ trace_create_file("enable", 0644, d_events,
+ "*:*", &ftrace_system_enable_fops);
+
+ for_each_event(call, __start_ftrace_events, __stop_ftrace_events) {
/* The linker may leave blanks */
if (!call->name)
continue;
- event_create_dir(call, d_events);
+ list_add(&call->list, &ftrace_events);
+ event_create_dir(call, d_events, &ftrace_event_id_fops,
+ &ftrace_enable_fops, &ftrace_event_filter_fops,
+ &ftrace_event_format_fops);
}
+ ret = register_module_notifier(&trace_module_nb);
+ if (!ret)
+ pr_warning("Failed to register trace events module notifier\n");
+
return 0;
}
fs_initcall(event_trace_init);
+
+#ifdef CONFIG_FTRACE_STARTUP_TEST
+
+static DEFINE_SPINLOCK(test_spinlock);
+static DEFINE_SPINLOCK(test_spinlock_irq);
+static DEFINE_MUTEX(test_mutex);
+
+static __init void test_work(struct work_struct *dummy)
+{
+ spin_lock(&test_spinlock);
+ spin_lock_irq(&test_spinlock_irq);
+ udelay(1);
+ spin_unlock_irq(&test_spinlock_irq);
+ spin_unlock(&test_spinlock);
+
+ mutex_lock(&test_mutex);
+ msleep(1);
+ mutex_unlock(&test_mutex);
+}
+
+static __init int event_test_thread(void *unused)
+{
+ void *test_malloc;
+
+ test_malloc = kmalloc(1234, GFP_KERNEL);
+ if (!test_malloc)
+ pr_info("failed to kmalloc\n");
+
+ schedule_on_each_cpu(test_work);
+
+ kfree(test_malloc);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (!kthread_should_stop())
+ schedule();
+
+ return 0;
+}
+
+/*
+ * Do various things that may trigger events.
+ */
+static __init void event_test_stuff(void)
+{
+ struct task_struct *test_thread;
+
+ test_thread = kthread_run(event_test_thread, NULL, "test-events");
+ msleep(1);
+ kthread_stop(test_thread);
+}
+
+/*
+ * For every trace event defined, we will test each trace point separately,
+ * and then by groups, and finally all trace points.
+ */
+static __init void event_trace_self_tests(void)
+{
+ struct ftrace_event_call *call;
+ struct event_subsystem *system;
+ char *sysname;
+ int ret;
+
+ pr_info("Running tests on trace events:\n");
+
+ list_for_each_entry(call, &ftrace_events, list) {
+
+ /* Only test those that have a regfunc */
+ if (!call->regfunc)
+ continue;
+
+ pr_info("Testing event %s: ", call->name);
+
+ /*
+ * If an event is already enabled, someone is using
+ * it and the self test should not be on.
+ */
+ if (call->enabled) {
+ pr_warning("Enabled event during self test!\n");
+ WARN_ON_ONCE(1);
+ continue;
+ }
+
+ call->enabled = 1;
+ call->regfunc();
+
+ event_test_stuff();
+
+ call->unregfunc();
+ call->enabled = 0;
+
+ pr_cont("OK\n");
+ }
+
+ /* Now test at the sub system level */
+
+ pr_info("Running tests on trace event systems:\n");
+
+ list_for_each_entry(system, &event_subsystems, list) {
+
+ /* the ftrace system is special, skip it */
+ if (strcmp(system->name, "ftrace") == 0)
+ continue;
+
+ pr_info("Testing event system %s: ", system->name);
+
+ /* ftrace_set_clr_event can modify the name passed in. */
+ sysname = kstrdup(system->name, GFP_KERNEL);
+ if (WARN_ON(!sysname)) {
+ pr_warning("Can't allocate memory, giving up!\n");
+ return;
+ }
+ ret = ftrace_set_clr_event(sysname, 1);
+ kfree(sysname);
+ if (WARN_ON_ONCE(ret)) {
+ pr_warning("error enabling system %s\n",
+ system->name);
+ continue;
+ }
+
+ event_test_stuff();
+
+ sysname = kstrdup(system->name, GFP_KERNEL);
+ if (WARN_ON(!sysname)) {
+ pr_warning("Can't allocate memory, giving up!\n");
+ return;
+ }
+ ret = ftrace_set_clr_event(sysname, 0);
+ kfree(sysname);
+
+ if (WARN_ON_ONCE(ret))
+ pr_warning("error disabling system %s\n",
+ system->name);
+
+ pr_cont("OK\n");
+ }
+
+ /* Test with all events enabled */
+
+ pr_info("Running tests on all trace events:\n");
+ pr_info("Testing all events: ");
+
+ sysname = kmalloc(4, GFP_KERNEL);
+ if (WARN_ON(!sysname)) {
+ pr_warning("Can't allocate memory, giving up!\n");
+ return;
+ }
+ memcpy(sysname, "*:*", 4);
+ ret = ftrace_set_clr_event(sysname, 1);
+ if (WARN_ON_ONCE(ret)) {
+ kfree(sysname);
+ pr_warning("error enabling all events\n");
+ return;
+ }
+
+ event_test_stuff();
+
+ /* reset sysname */
+ memcpy(sysname, "*:*", 4);
+ ret = ftrace_set_clr_event(sysname, 0);
+ kfree(sysname);
+
+ if (WARN_ON_ONCE(ret)) {
+ pr_warning("error disabling all events\n");
+ return;
+ }
+
+ pr_cont("OK\n");
+}
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+static DEFINE_PER_CPU(atomic_t, test_event_disable);
+
+static void
+function_test_events_call(unsigned long ip, unsigned long parent_ip)
+{
+ struct ring_buffer_event *event;
+ struct ftrace_entry *entry;
+ unsigned long flags;
+ long disabled;
+ int resched;
+ int cpu;
+ int pc;
+
+ pc = preempt_count();
+ resched = ftrace_preempt_disable();
+ cpu = raw_smp_processor_id();
+ disabled = atomic_inc_return(&per_cpu(test_event_disable, cpu));
+
+ if (disabled != 1)
+ goto out;
+
+ local_save_flags(flags);
+
+ event = trace_current_buffer_lock_reserve(TRACE_FN, sizeof(*entry),
+ flags, pc);
+ if (!event)
+ goto out;
+ entry = ring_buffer_event_data(event);
+ entry->ip = ip;
+ entry->parent_ip = parent_ip;
+
+ trace_nowake_buffer_unlock_commit(event, flags, pc);
+
+ out:
+ atomic_dec(&per_cpu(test_event_disable, cpu));
+ ftrace_preempt_enable(resched);
+}
+
+static struct ftrace_ops trace_ops __initdata =
+{
+ .func = function_test_events_call,
+};
+
+static __init void event_trace_self_test_with_function(void)
+{
+ register_ftrace_function(&trace_ops);
+ pr_info("Running tests again, along with the function tracer\n");
+ event_trace_self_tests();
+ unregister_ftrace_function(&trace_ops);
+}
+#else
+static __init void event_trace_self_test_with_function(void)
+{
+}
+#endif
+
+static __init int event_trace_self_tests_init(void)
+{
+
+ event_trace_self_tests();
+
+ event_trace_self_test_with_function();
+
+ return 0;
+}
+
+late_initcall(event_trace_self_tests_init);
+
+#endif
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ctype.h>
+#include <linux/mutex.h>
#include "trace.h"
#include "trace_output.h"
-static int filter_pred_64(struct filter_pred *pred, void *event)
+static DEFINE_MUTEX(filter_mutex);
+
+enum filter_op_ids
+{
+ OP_OR,
+ OP_AND,
+ OP_NE,
+ OP_EQ,
+ OP_LT,
+ OP_LE,
+ OP_GT,
+ OP_GE,
+ OP_NONE,
+ OP_OPEN_PAREN,
+};
+
+struct filter_op {
+ int id;
+ char *string;
+ int precedence;
+};
+
+static struct filter_op filter_ops[] = {
+ { OP_OR, "||", 1 },
+ { OP_AND, "&&", 2 },
+ { OP_NE, "!=", 4 },
+ { OP_EQ, "==", 4 },
+ { OP_LT, "<", 5 },
+ { OP_LE, "<=", 5 },
+ { OP_GT, ">", 5 },
+ { OP_GE, ">=", 5 },
+ { OP_NONE, "OP_NONE", 0 },
+ { OP_OPEN_PAREN, "(", 0 },
+};
+
+enum {
+ FILT_ERR_NONE,
+ FILT_ERR_INVALID_OP,
+ FILT_ERR_UNBALANCED_PAREN,
+ FILT_ERR_TOO_MANY_OPERANDS,
+ FILT_ERR_OPERAND_TOO_LONG,
+ FILT_ERR_FIELD_NOT_FOUND,
+ FILT_ERR_ILLEGAL_FIELD_OP,
+ FILT_ERR_ILLEGAL_INTVAL,
+ FILT_ERR_BAD_SUBSYS_FILTER,
+ FILT_ERR_TOO_MANY_PREDS,
+ FILT_ERR_MISSING_FIELD,
+ FILT_ERR_INVALID_FILTER,
+};
+
+static char *err_text[] = {
+ "No error",
+ "Invalid operator",
+ "Unbalanced parens",
+ "Too many operands",
+ "Operand too long",
+ "Field not found",
+ "Illegal operation for field type",
+ "Illegal integer value",
+ "Couldn't find or set field in one of a subsystem's events",
+ "Too many terms in predicate expression",
+ "Missing field name and/or value",
+ "Meaningless filter expression",
+};
+
+struct opstack_op {
+ int op;
+ struct list_head list;
+};
+
+struct postfix_elt {
+ int op;
+ char *operand;
+ struct list_head list;
+};
+
+struct filter_parse_state {
+ struct filter_op *ops;
+ struct list_head opstack;
+ struct list_head postfix;
+ int lasterr;
+ int lasterr_pos;
+
+ struct {
+ char *string;
+ unsigned int cnt;
+ unsigned int tail;
+ } infix;
+
+ struct {
+ char string[MAX_FILTER_STR_VAL];
+ int pos;
+ unsigned int tail;
+ } operand;
+};
+
+DEFINE_COMPARISON_PRED(s64);
+DEFINE_COMPARISON_PRED(u64);
+DEFINE_COMPARISON_PRED(s32);
+DEFINE_COMPARISON_PRED(u32);
+DEFINE_COMPARISON_PRED(s16);
+DEFINE_COMPARISON_PRED(u16);
+DEFINE_COMPARISON_PRED(s8);
+DEFINE_COMPARISON_PRED(u8);
+
+DEFINE_EQUALITY_PRED(64);
+DEFINE_EQUALITY_PRED(32);
+DEFINE_EQUALITY_PRED(16);
+DEFINE_EQUALITY_PRED(8);
+
+static int filter_pred_and(struct filter_pred *pred __attribute((unused)),
+ void *event __attribute((unused)),
+ int val1, int val2)
+{
+ return val1 && val2;
+}
+
+static int filter_pred_or(struct filter_pred *pred __attribute((unused)),
+ void *event __attribute((unused)),
+ int val1, int val2)
+{
+ return val1 || val2;
+}
+
+/* Filter predicate for fixed sized arrays of characters */
+static int filter_pred_string(struct filter_pred *pred, void *event,
+ int val1, int val2)
{
- u64 *addr = (u64 *)(event + pred->offset);
- u64 val = (u64)pred->val;
- int match;
+ char *addr = (char *)(event + pred->offset);
+ int cmp, match;
+
+ cmp = strncmp(addr, pred->str_val, pred->str_len);
- match = (val == *addr) ^ pred->not;
+ match = (!cmp) ^ pred->not;
return match;
}
-static int filter_pred_32(struct filter_pred *pred, void *event)
+/*
+ * Filter predicate for dynamic sized arrays of characters.
+ * These are implemented through a list of strings at the end
+ * of the entry.
+ * Also each of these strings have a field in the entry which
+ * contains its offset from the beginning of the entry.
+ * We have then first to get this field, dereference it
+ * and add it to the address of the entry, and at last we have
+ * the address of the string.
+ */
+static int filter_pred_strloc(struct filter_pred *pred, void *event,
+ int val1, int val2)
{
- u32 *addr = (u32 *)(event + pred->offset);
- u32 val = (u32)pred->val;
- int match;
+ int str_loc = *(int *)(event + pred->offset);
+ char *addr = (char *)(event + str_loc);
+ int cmp, match;
+
+ cmp = strncmp(addr, pred->str_val, pred->str_len);
- match = (val == *addr) ^ pred->not;
+ match = (!cmp) ^ pred->not;
return match;
}
-static int filter_pred_16(struct filter_pred *pred, void *event)
+static int filter_pred_none(struct filter_pred *pred, void *event,
+ int val1, int val2)
+{
+ return 0;
+}
+
+/* return 1 if event matches, 0 otherwise (discard) */
+int filter_match_preds(struct ftrace_event_call *call, void *rec)
{
- u16 *addr = (u16 *)(event + pred->offset);
- u16 val = (u16)pred->val;
- int match;
+ struct event_filter *filter = call->filter;
+ int match, top = 0, val1 = 0, val2 = 0;
+ int stack[MAX_FILTER_PRED];
+ struct filter_pred *pred;
+ int i;
+
+ for (i = 0; i < filter->n_preds; i++) {
+ pred = filter->preds[i];
+ if (!pred->pop_n) {
+ match = pred->fn(pred, rec, val1, val2);
+ stack[top++] = match;
+ continue;
+ }
+ if (pred->pop_n > top) {
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+ val1 = stack[--top];
+ val2 = stack[--top];
+ match = pred->fn(pred, rec, val1, val2);
+ stack[top++] = match;
+ }
- match = (val == *addr) ^ pred->not;
+ return stack[--top];
+}
+EXPORT_SYMBOL_GPL(filter_match_preds);
- return match;
+static void parse_error(struct filter_parse_state *ps, int err, int pos)
+{
+ ps->lasterr = err;
+ ps->lasterr_pos = pos;
}
-static int filter_pred_8(struct filter_pred *pred, void *event)
+static void remove_filter_string(struct event_filter *filter)
{
- u8 *addr = (u8 *)(event + pred->offset);
- u8 val = (u8)pred->val;
- int match;
+ kfree(filter->filter_string);
+ filter->filter_string = NULL;
+}
- match = (val == *addr) ^ pred->not;
+static int replace_filter_string(struct event_filter *filter,
+ char *filter_string)
+{
+ kfree(filter->filter_string);
+ filter->filter_string = kstrdup(filter_string, GFP_KERNEL);
+ if (!filter->filter_string)
+ return -ENOMEM;
- return match;
+ return 0;
}
-static int filter_pred_string(struct filter_pred *pred, void *event)
+static int append_filter_string(struct event_filter *filter,
+ char *string)
{
- char *addr = (char *)(event + pred->offset);
- int cmp, match;
+ int newlen;
+ char *new_filter_string;
- cmp = strncmp(addr, pred->str_val, pred->str_len);
+ BUG_ON(!filter->filter_string);
+ newlen = strlen(filter->filter_string) + strlen(string) + 1;
+ new_filter_string = kmalloc(newlen, GFP_KERNEL);
+ if (!new_filter_string)
+ return -ENOMEM;
- match = (!cmp) ^ pred->not;
+ strcpy(new_filter_string, filter->filter_string);
+ strcat(new_filter_string, string);
+ kfree(filter->filter_string);
+ filter->filter_string = new_filter_string;
- return match;
+ return 0;
}
-/* return 1 if event matches, 0 otherwise (discard) */
-int filter_match_preds(struct ftrace_event_call *call, void *rec)
+static void append_filter_err(struct filter_parse_state *ps,
+ struct event_filter *filter)
{
- int i, matched, and_failed = 0;
- struct filter_pred *pred;
+ int pos = ps->lasterr_pos;
+ char *buf, *pbuf;
- for (i = 0; i < MAX_FILTER_PRED; i++) {
- if (call->preds[i]) {
- pred = call->preds[i];
- if (and_failed && !pred->or)
- continue;
- matched = pred->fn(pred, rec);
- if (!matched && !pred->or) {
- and_failed = 1;
- continue;
- } else if (matched && pred->or)
- return 1;
- } else
- break;
- }
+ buf = (char *)__get_free_page(GFP_TEMPORARY);
+ if (!buf)
+ return;
- if (and_failed)
- return 0;
+ append_filter_string(filter, "\n");
+ memset(buf, ' ', PAGE_SIZE);
+ if (pos > PAGE_SIZE - 128)
+ pos = 0;
+ buf[pos] = '^';
+ pbuf = &buf[pos] + 1;
- return 1;
+ sprintf(pbuf, "\nparse_error: %s\n", err_text[ps->lasterr]);
+ append_filter_string(filter, buf);
+ free_page((unsigned long) buf);
}
-void filter_print_preds(struct filter_pred **preds, struct trace_seq *s)
+void print_event_filter(struct ftrace_event_call *call, struct trace_seq *s)
{
- char *field_name;
- struct filter_pred *pred;
- int i;
+ struct event_filter *filter = call->filter;
- if (!preds) {
+ mutex_lock(&filter_mutex);
+ if (filter->filter_string)
+ trace_seq_printf(s, "%s\n", filter->filter_string);
+ else
trace_seq_printf(s, "none\n");
- return;
- }
+ mutex_unlock(&filter_mutex);
+}
- for (i = 0; i < MAX_FILTER_PRED; i++) {
- if (preds[i]) {
- pred = preds[i];
- field_name = pred->field_name;
- if (i)
- trace_seq_printf(s, pred->or ? "|| " : "&& ");
- trace_seq_printf(s, "%s ", field_name);
- trace_seq_printf(s, pred->not ? "!= " : "== ");
- if (pred->str_val)
- trace_seq_printf(s, "%s\n", pred->str_val);
- else
- trace_seq_printf(s, "%llu\n", pred->val);
- } else
- break;
- }
+void print_subsystem_event_filter(struct event_subsystem *system,
+ struct trace_seq *s)
+{
+ struct event_filter *filter = system->filter;
+
+ mutex_lock(&filter_mutex);
+ if (filter->filter_string)
+ trace_seq_printf(s, "%s\n", filter->filter_string);
+ else
+ trace_seq_printf(s, "none\n");
+ mutex_unlock(&filter_mutex);
}
static struct ftrace_event_field *
return NULL;
}
-void filter_free_pred(struct filter_pred *pred)
+static void filter_free_pred(struct filter_pred *pred)
{
if (!pred)
return;
kfree(pred->field_name);
- kfree(pred->str_val);
kfree(pred);
}
-void filter_free_preds(struct ftrace_event_call *call)
+static void filter_clear_pred(struct filter_pred *pred)
{
- int i;
+ kfree(pred->field_name);
+ pred->field_name = NULL;
+ pred->str_len = 0;
+}
- if (call->preds) {
- for (i = 0; i < MAX_FILTER_PRED; i++)
- filter_free_pred(call->preds[i]);
- kfree(call->preds);
- call->preds = NULL;
+static int filter_set_pred(struct filter_pred *dest,
+ struct filter_pred *src,
+ filter_pred_fn_t fn)
+{
+ *dest = *src;
+ if (src->field_name) {
+ dest->field_name = kstrdup(src->field_name, GFP_KERNEL);
+ if (!dest->field_name)
+ return -ENOMEM;
}
+ dest->fn = fn;
+
+ return 0;
}
-void filter_free_subsystem_preds(struct event_subsystem *system)
+static void filter_disable_preds(struct ftrace_event_call *call)
{
- struct ftrace_event_call *call = __start_ftrace_events;
+ struct event_filter *filter = call->filter;
int i;
- if (system->preds) {
- for (i = 0; i < MAX_FILTER_PRED; i++)
- filter_free_pred(system->preds[i]);
- kfree(system->preds);
- system->preds = NULL;
- }
+ call->filter_active = 0;
+ filter->n_preds = 0;
- events_for_each(call) {
- if (!call->name || !call->regfunc)
- continue;
+ for (i = 0; i < MAX_FILTER_PRED; i++)
+ filter->preds[i]->fn = filter_pred_none;
+}
+
+void destroy_preds(struct ftrace_event_call *call)
+{
+ struct event_filter *filter = call->filter;
+ int i;
- if (!strcmp(call->system, system->name))
- filter_free_preds(call);
+ for (i = 0; i < MAX_FILTER_PRED; i++) {
+ if (filter->preds[i])
+ filter_free_pred(filter->preds[i]);
}
+ kfree(filter->preds);
+ kfree(filter);
+ call->filter = NULL;
}
-static int __filter_add_pred(struct ftrace_event_call *call,
- struct filter_pred *pred)
+int init_preds(struct ftrace_event_call *call)
{
+ struct event_filter *filter;
+ struct filter_pred *pred;
int i;
- if (call->preds && !pred->compound)
- filter_free_preds(call);
+ filter = call->filter = kzalloc(sizeof(*filter), GFP_KERNEL);
+ if (!call->filter)
+ return -ENOMEM;
- if (!call->preds) {
- call->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
- GFP_KERNEL);
- if (!call->preds)
- return -ENOMEM;
- }
+ call->filter_active = 0;
+ filter->n_preds = 0;
+
+ filter->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred), GFP_KERNEL);
+ if (!filter->preds)
+ goto oom;
for (i = 0; i < MAX_FILTER_PRED; i++) {
- if (!call->preds[i]) {
- call->preds[i] = pred;
- return 0;
+ pred = kzalloc(sizeof(*pred), GFP_KERNEL);
+ if (!pred)
+ goto oom;
+ pred->fn = filter_pred_none;
+ filter->preds[i] = pred;
+ }
+
+ return 0;
+
+oom:
+ destroy_preds(call);
+
+ return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(init_preds);
+
+static void filter_free_subsystem_preds(struct event_subsystem *system)
+{
+ struct event_filter *filter = system->filter;
+ struct ftrace_event_call *call;
+ int i;
+
+ if (filter->n_preds) {
+ for (i = 0; i < filter->n_preds; i++)
+ filter_free_pred(filter->preds[i]);
+ kfree(filter->preds);
+ filter->preds = NULL;
+ filter->n_preds = 0;
+ }
+
+ mutex_lock(&event_mutex);
+ list_for_each_entry(call, &ftrace_events, list) {
+ if (!call->define_fields)
+ continue;
+
+ if (!strcmp(call->system, system->name)) {
+ filter_disable_preds(call);
+ remove_filter_string(call->filter);
}
}
+ mutex_unlock(&event_mutex);
+}
+
+static int filter_add_pred_fn(struct filter_parse_state *ps,
+ struct ftrace_event_call *call,
+ struct filter_pred *pred,
+ filter_pred_fn_t fn)
+{
+ struct event_filter *filter = call->filter;
+ int idx, err;
+
+ if (filter->n_preds == MAX_FILTER_PRED) {
+ parse_error(ps, FILT_ERR_TOO_MANY_PREDS, 0);
+ return -ENOSPC;
+ }
+
+ idx = filter->n_preds;
+ filter_clear_pred(filter->preds[idx]);
+ err = filter_set_pred(filter->preds[idx], pred, fn);
+ if (err)
+ return err;
- return -ENOSPC;
+ filter->n_preds++;
+ call->filter_active = 1;
+
+ return 0;
}
+enum {
+ FILTER_STATIC_STRING = 1,
+ FILTER_DYN_STRING
+};
+
static int is_string_field(const char *type)
{
if (strchr(type, '[') && strstr(type, "char"))
- return 1;
+ return FILTER_STATIC_STRING;
+
+ if (!strcmp(type, "__str_loc"))
+ return FILTER_DYN_STRING;
return 0;
}
-int filter_add_pred(struct ftrace_event_call *call, struct filter_pred *pred)
+static int is_legal_op(struct ftrace_event_field *field, int op)
+{
+ if (is_string_field(field->type) && (op != OP_EQ && op != OP_NE))
+ return 0;
+
+ return 1;
+}
+
+static filter_pred_fn_t select_comparison_fn(int op, int field_size,
+ int field_is_signed)
+{
+ filter_pred_fn_t fn = NULL;
+
+ switch (field_size) {
+ case 8:
+ if (op == OP_EQ || op == OP_NE)
+ fn = filter_pred_64;
+ else if (field_is_signed)
+ fn = filter_pred_s64;
+ else
+ fn = filter_pred_u64;
+ break;
+ case 4:
+ if (op == OP_EQ || op == OP_NE)
+ fn = filter_pred_32;
+ else if (field_is_signed)
+ fn = filter_pred_s32;
+ else
+ fn = filter_pred_u32;
+ break;
+ case 2:
+ if (op == OP_EQ || op == OP_NE)
+ fn = filter_pred_16;
+ else if (field_is_signed)
+ fn = filter_pred_s16;
+ else
+ fn = filter_pred_u16;
+ break;
+ case 1:
+ if (op == OP_EQ || op == OP_NE)
+ fn = filter_pred_8;
+ else if (field_is_signed)
+ fn = filter_pred_s8;
+ else
+ fn = filter_pred_u8;
+ break;
+ }
+
+ return fn;
+}
+
+static int filter_add_pred(struct filter_parse_state *ps,
+ struct ftrace_event_call *call,
+ struct filter_pred *pred)
{
struct ftrace_event_field *field;
+ filter_pred_fn_t fn;
+ unsigned long long val;
+ int string_type;
+
+ pred->fn = filter_pred_none;
+
+ if (pred->op == OP_AND) {
+ pred->pop_n = 2;
+ return filter_add_pred_fn(ps, call, pred, filter_pred_and);
+ } else if (pred->op == OP_OR) {
+ pred->pop_n = 2;
+ return filter_add_pred_fn(ps, call, pred, filter_pred_or);
+ }
field = find_event_field(call, pred->field_name);
- if (!field)
+ if (!field) {
+ parse_error(ps, FILT_ERR_FIELD_NOT_FOUND, 0);
return -EINVAL;
+ }
pred->offset = field->offset;
- if (is_string_field(field->type)) {
- if (!pred->str_val)
- return -EINVAL;
- pred->fn = filter_pred_string;
+ if (!is_legal_op(field, pred->op)) {
+ parse_error(ps, FILT_ERR_ILLEGAL_FIELD_OP, 0);
+ return -EINVAL;
+ }
+
+ string_type = is_string_field(field->type);
+ if (string_type) {
+ if (string_type == FILTER_STATIC_STRING)
+ fn = filter_pred_string;
+ else
+ fn = filter_pred_strloc;
pred->str_len = field->size;
- return __filter_add_pred(call, pred);
+ if (pred->op == OP_NE)
+ pred->not = 1;
+ return filter_add_pred_fn(ps, call, pred, fn);
} else {
- if (pred->str_val)
+ if (strict_strtoull(pred->str_val, 0, &val)) {
+ parse_error(ps, FILT_ERR_ILLEGAL_INTVAL, 0);
return -EINVAL;
+ }
+ pred->val = val;
}
- switch (field->size) {
- case 8:
- pred->fn = filter_pred_64;
- break;
- case 4:
- pred->fn = filter_pred_32;
- break;
- case 2:
- pred->fn = filter_pred_16;
- break;
- case 1:
- pred->fn = filter_pred_8;
- break;
- default:
+ fn = select_comparison_fn(pred->op, field->size, field->is_signed);
+ if (!fn) {
+ parse_error(ps, FILT_ERR_INVALID_OP, 0);
return -EINVAL;
}
- return __filter_add_pred(call, pred);
+ if (pred->op == OP_NE)
+ pred->not = 1;
+
+ return filter_add_pred_fn(ps, call, pred, fn);
}
-static struct filter_pred *copy_pred(struct filter_pred *pred)
+static int filter_add_subsystem_pred(struct filter_parse_state *ps,
+ struct event_subsystem *system,
+ struct filter_pred *pred,
+ char *filter_string)
{
- struct filter_pred *new_pred = kmalloc(sizeof(*pred), GFP_KERNEL);
- if (!new_pred)
- return NULL;
+ struct event_filter *filter = system->filter;
+ struct ftrace_event_call *call;
+ int err = 0;
+
+ if (!filter->preds) {
+ filter->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
+ GFP_KERNEL);
- memcpy(new_pred, pred, sizeof(*pred));
+ if (!filter->preds)
+ return -ENOMEM;
+ }
- if (pred->field_name) {
- new_pred->field_name = kstrdup(pred->field_name, GFP_KERNEL);
- if (!new_pred->field_name) {
- kfree(new_pred);
- return NULL;
- }
+ if (filter->n_preds == MAX_FILTER_PRED) {
+ parse_error(ps, FILT_ERR_TOO_MANY_PREDS, 0);
+ return -ENOSPC;
}
- if (pred->str_val) {
- new_pred->str_val = kstrdup(pred->str_val, GFP_KERNEL);
- if (!new_pred->str_val) {
- filter_free_pred(new_pred);
- return NULL;
+ filter->preds[filter->n_preds] = pred;
+ filter->n_preds++;
+
+ mutex_lock(&event_mutex);
+ list_for_each_entry(call, &ftrace_events, list) {
+
+ if (!call->define_fields)
+ continue;
+
+ if (strcmp(call->system, system->name))
+ continue;
+
+ err = filter_add_pred(ps, call, pred);
+ if (err) {
+ mutex_unlock(&event_mutex);
+ filter_free_subsystem_preds(system);
+ parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
+ goto out;
}
+ replace_filter_string(call->filter, filter_string);
}
+ mutex_unlock(&event_mutex);
+out:
+ return err;
+}
+
+static void parse_init(struct filter_parse_state *ps,
+ struct filter_op *ops,
+ char *infix_string)
+{
+ memset(ps, '\0', sizeof(*ps));
- return new_pred;
+ ps->infix.string = infix_string;
+ ps->infix.cnt = strlen(infix_string);
+ ps->ops = ops;
+
+ INIT_LIST_HEAD(&ps->opstack);
+ INIT_LIST_HEAD(&ps->postfix);
}
-int filter_add_subsystem_pred(struct event_subsystem *system,
- struct filter_pred *pred)
+static char infix_next(struct filter_parse_state *ps)
{
- struct ftrace_event_call *call = __start_ftrace_events;
- struct filter_pred *event_pred;
- int i;
+ ps->infix.cnt--;
- if (system->preds && !pred->compound)
- filter_free_subsystem_preds(system);
+ return ps->infix.string[ps->infix.tail++];
+}
- if (!system->preds) {
- system->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
- GFP_KERNEL);
- if (!system->preds)
- return -ENOMEM;
+static char infix_peek(struct filter_parse_state *ps)
+{
+ if (ps->infix.tail == strlen(ps->infix.string))
+ return 0;
+
+ return ps->infix.string[ps->infix.tail];
+}
+
+static void infix_advance(struct filter_parse_state *ps)
+{
+ ps->infix.cnt--;
+ ps->infix.tail++;
+}
+
+static inline int is_precedence_lower(struct filter_parse_state *ps,
+ int a, int b)
+{
+ return ps->ops[a].precedence < ps->ops[b].precedence;
+}
+
+static inline int is_op_char(struct filter_parse_state *ps, char c)
+{
+ int i;
+
+ for (i = 0; strcmp(ps->ops[i].string, "OP_NONE"); i++) {
+ if (ps->ops[i].string[0] == c)
+ return 1;
}
- for (i = 0; i < MAX_FILTER_PRED; i++) {
- if (!system->preds[i]) {
- system->preds[i] = pred;
- break;
+ return 0;
+}
+
+static int infix_get_op(struct filter_parse_state *ps, char firstc)
+{
+ char nextc = infix_peek(ps);
+ char opstr[3];
+ int i;
+
+ opstr[0] = firstc;
+ opstr[1] = nextc;
+ opstr[2] = '\0';
+
+ for (i = 0; strcmp(ps->ops[i].string, "OP_NONE"); i++) {
+ if (!strcmp(opstr, ps->ops[i].string)) {
+ infix_advance(ps);
+ return ps->ops[i].id;
}
}
- if (i == MAX_FILTER_PRED)
- return -ENOSPC;
+ opstr[1] = '\0';
+
+ for (i = 0; strcmp(ps->ops[i].string, "OP_NONE"); i++) {
+ if (!strcmp(opstr, ps->ops[i].string))
+ return ps->ops[i].id;
+ }
+
+ return OP_NONE;
+}
+
+static inline void clear_operand_string(struct filter_parse_state *ps)
+{
+ memset(ps->operand.string, '\0', MAX_FILTER_STR_VAL);
+ ps->operand.tail = 0;
+}
+
+static inline int append_operand_char(struct filter_parse_state *ps, char c)
+{
+ if (ps->operand.tail == MAX_FILTER_STR_VAL)
+ return -EINVAL;
+
+ ps->operand.string[ps->operand.tail++] = c;
+
+ return 0;
+}
+
+static int filter_opstack_push(struct filter_parse_state *ps, int op)
+{
+ struct opstack_op *opstack_op;
+
+ opstack_op = kmalloc(sizeof(*opstack_op), GFP_KERNEL);
+ if (!opstack_op)
+ return -ENOMEM;
+
+ opstack_op->op = op;
+ list_add(&opstack_op->list, &ps->opstack);
+
+ return 0;
+}
+
+static int filter_opstack_empty(struct filter_parse_state *ps)
+{
+ return list_empty(&ps->opstack);
+}
+
+static int filter_opstack_top(struct filter_parse_state *ps)
+{
+ struct opstack_op *opstack_op;
+
+ if (filter_opstack_empty(ps))
+ return OP_NONE;
+
+ opstack_op = list_first_entry(&ps->opstack, struct opstack_op, list);
+
+ return opstack_op->op;
+}
+
+static int filter_opstack_pop(struct filter_parse_state *ps)
+{
+ struct opstack_op *opstack_op;
+ int op;
+
+ if (filter_opstack_empty(ps))
+ return OP_NONE;
+
+ opstack_op = list_first_entry(&ps->opstack, struct opstack_op, list);
+ op = opstack_op->op;
+ list_del(&opstack_op->list);
+
+ kfree(opstack_op);
+
+ return op;
+}
+
+static void filter_opstack_clear(struct filter_parse_state *ps)
+{
+ while (!filter_opstack_empty(ps))
+ filter_opstack_pop(ps);
+}
+
+static char *curr_operand(struct filter_parse_state *ps)
+{
+ return ps->operand.string;
+}
+
+static int postfix_append_operand(struct filter_parse_state *ps, char *operand)
+{
+ struct postfix_elt *elt;
+
+ elt = kmalloc(sizeof(*elt), GFP_KERNEL);
+ if (!elt)
+ return -ENOMEM;
+
+ elt->op = OP_NONE;
+ elt->operand = kstrdup(operand, GFP_KERNEL);
+ if (!elt->operand) {
+ kfree(elt);
+ return -ENOMEM;
+ }
+
+ list_add_tail(&elt->list, &ps->postfix);
+
+ return 0;
+}
+
+static int postfix_append_op(struct filter_parse_state *ps, int op)
+{
+ struct postfix_elt *elt;
+
+ elt = kmalloc(sizeof(*elt), GFP_KERNEL);
+ if (!elt)
+ return -ENOMEM;
+
+ elt->op = op;
+ elt->operand = NULL;
+
+ list_add_tail(&elt->list, &ps->postfix);
+
+ return 0;
+}
+
+static void postfix_clear(struct filter_parse_state *ps)
+{
+ struct postfix_elt *elt;
+
+ while (!list_empty(&ps->postfix)) {
+ elt = list_first_entry(&ps->postfix, struct postfix_elt, list);
+ kfree(elt->operand);
+ list_del(&elt->list);
+ }
+}
- events_for_each(call) {
- int err;
+static int filter_parse(struct filter_parse_state *ps)
+{
+ int in_string = 0;
+ int op, top_op;
+ char ch;
- if (!call->name || !call->regfunc)
+ while ((ch = infix_next(ps))) {
+ if (ch == '"') {
+ in_string ^= 1;
continue;
+ }
- if (strcmp(call->system, system->name))
+ if (in_string)
+ goto parse_operand;
+
+ if (isspace(ch))
continue;
- if (!find_event_field(call, pred->field_name))
+ if (is_op_char(ps, ch)) {
+ op = infix_get_op(ps, ch);
+ if (op == OP_NONE) {
+ parse_error(ps, FILT_ERR_INVALID_OP, 0);
+ return -EINVAL;
+ }
+
+ if (strlen(curr_operand(ps))) {
+ postfix_append_operand(ps, curr_operand(ps));
+ clear_operand_string(ps);
+ }
+
+ while (!filter_opstack_empty(ps)) {
+ top_op = filter_opstack_top(ps);
+ if (!is_precedence_lower(ps, top_op, op)) {
+ top_op = filter_opstack_pop(ps);
+ postfix_append_op(ps, top_op);
+ continue;
+ }
+ break;
+ }
+
+ filter_opstack_push(ps, op);
continue;
+ }
- event_pred = copy_pred(pred);
- if (!event_pred)
- goto oom;
+ if (ch == '(') {
+ filter_opstack_push(ps, OP_OPEN_PAREN);
+ continue;
+ }
- err = filter_add_pred(call, event_pred);
- if (err)
- filter_free_pred(event_pred);
- if (err == -ENOMEM)
- goto oom;
+ if (ch == ')') {
+ if (strlen(curr_operand(ps))) {
+ postfix_append_operand(ps, curr_operand(ps));
+ clear_operand_string(ps);
+ }
+
+ top_op = filter_opstack_pop(ps);
+ while (top_op != OP_NONE) {
+ if (top_op == OP_OPEN_PAREN)
+ break;
+ postfix_append_op(ps, top_op);
+ top_op = filter_opstack_pop(ps);
+ }
+ if (top_op == OP_NONE) {
+ parse_error(ps, FILT_ERR_UNBALANCED_PAREN, 0);
+ return -EINVAL;
+ }
+ continue;
+ }
+parse_operand:
+ if (append_operand_char(ps, ch)) {
+ parse_error(ps, FILT_ERR_OPERAND_TOO_LONG, 0);
+ return -EINVAL;
+ }
+ }
+
+ if (strlen(curr_operand(ps)))
+ postfix_append_operand(ps, curr_operand(ps));
+
+ while (!filter_opstack_empty(ps)) {
+ top_op = filter_opstack_pop(ps);
+ if (top_op == OP_NONE)
+ break;
+ if (top_op == OP_OPEN_PAREN) {
+ parse_error(ps, FILT_ERR_UNBALANCED_PAREN, 0);
+ return -EINVAL;
+ }
+ postfix_append_op(ps, top_op);
}
return 0;
+}
-oom:
- system->preds[i] = NULL;
- return -ENOMEM;
+static struct filter_pred *create_pred(int op, char *operand1, char *operand2)
+{
+ struct filter_pred *pred;
+
+ pred = kzalloc(sizeof(*pred), GFP_KERNEL);
+ if (!pred)
+ return NULL;
+
+ pred->field_name = kstrdup(operand1, GFP_KERNEL);
+ if (!pred->field_name) {
+ kfree(pred);
+ return NULL;
+ }
+
+ strcpy(pred->str_val, operand2);
+ pred->str_len = strlen(operand2);
+
+ pred->op = op;
+
+ return pred;
}
-int filter_parse(char **pbuf, struct filter_pred *pred)
+static struct filter_pred *create_logical_pred(int op)
{
- char *tmp, *tok, *val_str = NULL;
- int tok_n = 0;
+ struct filter_pred *pred;
- /* field ==/!= number, or/and field ==/!= number, number */
- while ((tok = strsep(pbuf, " \n"))) {
- if (tok_n == 0) {
- if (!strcmp(tok, "0")) {
- pred->clear = 1;
- return 0;
- } else if (!strcmp(tok, "&&")) {
- pred->or = 0;
- pred->compound = 1;
- } else if (!strcmp(tok, "||")) {
- pred->or = 1;
- pred->compound = 1;
- } else
- pred->field_name = tok;
- tok_n = 1;
+ pred = kzalloc(sizeof(*pred), GFP_KERNEL);
+ if (!pred)
+ return NULL;
+
+ pred->op = op;
+
+ return pred;
+}
+
+static int check_preds(struct filter_parse_state *ps)
+{
+ int n_normal_preds = 0, n_logical_preds = 0;
+ struct postfix_elt *elt;
+
+ list_for_each_entry(elt, &ps->postfix, list) {
+ if (elt->op == OP_NONE)
+ continue;
+
+ if (elt->op == OP_AND || elt->op == OP_OR) {
+ n_logical_preds++;
continue;
}
- if (tok_n == 1) {
- if (!pred->field_name)
- pred->field_name = tok;
- else if (!strcmp(tok, "!="))
- pred->not = 1;
- else if (!strcmp(tok, "=="))
- pred->not = 0;
+ n_normal_preds++;
+ }
+
+ if (!n_normal_preds || n_logical_preds >= n_normal_preds) {
+ parse_error(ps, FILT_ERR_INVALID_FILTER, 0);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int replace_preds(struct event_subsystem *system,
+ struct ftrace_event_call *call,
+ struct filter_parse_state *ps,
+ char *filter_string)
+{
+ char *operand1 = NULL, *operand2 = NULL;
+ struct filter_pred *pred;
+ struct postfix_elt *elt;
+ int err;
+
+ err = check_preds(ps);
+ if (err)
+ return err;
+
+ list_for_each_entry(elt, &ps->postfix, list) {
+ if (elt->op == OP_NONE) {
+ if (!operand1)
+ operand1 = elt->operand;
+ else if (!operand2)
+ operand2 = elt->operand;
else {
- pred->field_name = NULL;
+ parse_error(ps, FILT_ERR_TOO_MANY_OPERANDS, 0);
return -EINVAL;
}
- tok_n = 2;
continue;
}
- if (tok_n == 2) {
- if (pred->compound) {
- if (!strcmp(tok, "!="))
- pred->not = 1;
- else if (!strcmp(tok, "=="))
- pred->not = 0;
- else {
- pred->field_name = NULL;
- return -EINVAL;
- }
- } else {
- val_str = tok;
- break; /* done */
- }
- tok_n = 3;
+
+ if (elt->op == OP_AND || elt->op == OP_OR) {
+ pred = create_logical_pred(elt->op);
+ if (call) {
+ err = filter_add_pred(ps, call, pred);
+ filter_free_pred(pred);
+ } else
+ err = filter_add_subsystem_pred(ps, system,
+ pred, filter_string);
+ if (err)
+ return err;
+
+ operand1 = operand2 = NULL;
continue;
}
- if (tok_n == 3) {
- val_str = tok;
- break; /* done */
+
+ if (!operand1 || !operand2) {
+ parse_error(ps, FILT_ERR_MISSING_FIELD, 0);
+ return -EINVAL;
}
+
+ pred = create_pred(elt->op, operand1, operand2);
+ if (call) {
+ err = filter_add_pred(ps, call, pred);
+ filter_free_pred(pred);
+ } else
+ err = filter_add_subsystem_pred(ps, system, pred,
+ filter_string);
+ if (err)
+ return err;
+
+ operand1 = operand2 = NULL;
}
- if (!val_str) {
- pred->field_name = NULL;
- return -EINVAL;
+ return 0;
+}
+
+int apply_event_filter(struct ftrace_event_call *call, char *filter_string)
+{
+ int err;
+
+ struct filter_parse_state *ps;
+
+ mutex_lock(&filter_mutex);
+
+ if (!strcmp(strstrip(filter_string), "0")) {
+ filter_disable_preds(call);
+ remove_filter_string(call->filter);
+ mutex_unlock(&filter_mutex);
+ return 0;
}
- pred->field_name = kstrdup(pred->field_name, GFP_KERNEL);
- if (!pred->field_name)
+ ps = kzalloc(sizeof(*ps), GFP_KERNEL);
+ if (!ps)
return -ENOMEM;
- pred->val = simple_strtoull(val_str, &tmp, 0);
- if (tmp == val_str) {
- pred->str_val = kstrdup(val_str, GFP_KERNEL);
- if (!pred->str_val)
- return -ENOMEM;
- } else if (*tmp != '\0')
- return -EINVAL;
+ filter_disable_preds(call);
+ replace_filter_string(call->filter, filter_string);
- return 0;
+ parse_init(ps, filter_ops, filter_string);
+ err = filter_parse(ps);
+ if (err) {
+ append_filter_err(ps, call->filter);
+ goto out;
+ }
+
+ err = replace_preds(NULL, call, ps, filter_string);
+ if (err)
+ append_filter_err(ps, call->filter);
+
+out:
+ filter_opstack_clear(ps);
+ postfix_clear(ps);
+ kfree(ps);
+
+ mutex_unlock(&filter_mutex);
+
+ return err;
}
+int apply_subsystem_event_filter(struct event_subsystem *system,
+ char *filter_string)
+{
+ int err;
+
+ struct filter_parse_state *ps;
+
+ mutex_lock(&filter_mutex);
+
+ if (!strcmp(strstrip(filter_string), "0")) {
+ filter_free_subsystem_preds(system);
+ remove_filter_string(system->filter);
+ mutex_unlock(&filter_mutex);
+ return 0;
+ }
+
+ ps = kzalloc(sizeof(*ps), GFP_KERNEL);
+ if (!ps)
+ return -ENOMEM;
+
+ filter_free_subsystem_preds(system);
+ replace_filter_string(system->filter, filter_string);
+
+ parse_init(ps, filter_ops, filter_string);
+ err = filter_parse(ps);
+ if (err) {
+ append_filter_err(ps, system->filter);
+ goto out;
+ }
+
+ err = replace_preds(system, NULL, ps, filter_string);
+ if (err)
+ append_filter_err(ps, system->filter);
+
+out:
+ filter_opstack_clear(ps);
+ postfix_clear(ps);
+ kfree(ps);
+
+ mutex_unlock(&filter_mutex);
+
+ return err;
+}
+++ /dev/null
-/*
- * Stage 1 of the trace events.
- *
- * Override the macros in <trace/trace_event_types.h> to include the following:
- *
- * struct ftrace_raw_<call> {
- * struct trace_entry ent;
- * <type> <item>;
- * <type2> <item2>[<len>];
- * [...]
- * };
- *
- * The <type> <item> is created by the __field(type, item) macro or
- * the __array(type2, item2, len) macro.
- * We simply do "type item;", and that will create the fields
- * in the structure.
- */
-
-#undef TRACE_FORMAT
-#define TRACE_FORMAT(call, proto, args, fmt)
-
-#undef __array
-#define __array(type, item, len) type item[len];
-
-#undef __field
-#define __field(type, item) type item;
-
-#undef TP_STRUCT__entry
-#define TP_STRUCT__entry(args...) args
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
- struct ftrace_raw_##name { \
- struct trace_entry ent; \
- tstruct \
- }; \
- static struct ftrace_event_call event_##name
-
-#include <trace/trace_event_types.h>
+++ /dev/null
-/*
- * Stage 2 of the trace events.
- *
- * Override the macros in <trace/trace_event_types.h> to include the following:
- *
- * enum print_line_t
- * ftrace_raw_output_<call>(struct trace_iterator *iter, int flags)
- * {
- * struct trace_seq *s = &iter->seq;
- * struct ftrace_raw_<call> *field; <-- defined in stage 1
- * struct trace_entry *entry;
- * int ret;
- *
- * entry = iter->ent;
- *
- * if (entry->type != event_<call>.id) {
- * WARN_ON_ONCE(1);
- * return TRACE_TYPE_UNHANDLED;
- * }
- *
- * field = (typeof(field))entry;
- *
- * ret = trace_seq_printf(s, <TP_printk> "\n");
- * if (!ret)
- * return TRACE_TYPE_PARTIAL_LINE;
- *
- * return TRACE_TYPE_HANDLED;
- * }
- *
- * This is the method used to print the raw event to the trace
- * output format. Note, this is not needed if the data is read
- * in binary.
- */
-
-#undef __entry
-#define __entry field
-
-#undef TP_printk
-#define TP_printk(fmt, args...) fmt "\n", args
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
-enum print_line_t \
-ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \
-{ \
- struct trace_seq *s = &iter->seq; \
- struct ftrace_raw_##call *field; \
- struct trace_entry *entry; \
- int ret; \
- \
- entry = iter->ent; \
- \
- if (entry->type != event_##call.id) { \
- WARN_ON_ONCE(1); \
- return TRACE_TYPE_UNHANDLED; \
- } \
- \
- field = (typeof(field))entry; \
- \
- ret = trace_seq_printf(s, #call ": " print); \
- if (!ret) \
- return TRACE_TYPE_PARTIAL_LINE; \
- \
- return TRACE_TYPE_HANDLED; \
-}
-
-#include <trace/trace_event_types.h>
-
-/*
- * Setup the showing format of trace point.
- *
- * int
- * ftrace_format_##call(struct trace_seq *s)
- * {
- * struct ftrace_raw_##call field;
- * int ret;
- *
- * ret = trace_seq_printf(s, #type " " #item ";"
- * " offset:%u; size:%u;\n",
- * offsetof(struct ftrace_raw_##call, item),
- * sizeof(field.type));
- *
- * }
- */
-
-#undef TP_STRUCT__entry
-#define TP_STRUCT__entry(args...) args
-
-#undef __field
-#define __field(type, item) \
- ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t" \
- "offset:%u;\tsize:%u;\n", \
- (unsigned int)offsetof(typeof(field), item), \
- (unsigned int)sizeof(field.item)); \
- if (!ret) \
- return 0;
-
-#undef __array
-#define __array(type, item, len) \
- ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
- "offset:%u;\tsize:%u;\n", \
- (unsigned int)offsetof(typeof(field), item), \
- (unsigned int)sizeof(field.item)); \
- if (!ret) \
- return 0;
-
-#undef __entry
-#define __entry REC
-
-#undef TP_printk
-#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
-
-#undef TP_fast_assign
-#define TP_fast_assign(args...) args
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
-static int \
-ftrace_format_##call(struct trace_seq *s) \
-{ \
- struct ftrace_raw_##call field; \
- int ret; \
- \
- tstruct; \
- \
- trace_seq_printf(s, "\nprint fmt: " print); \
- \
- return ret; \
-}
-
-#include <trace/trace_event_types.h>
-
-#undef __field
-#define __field(type, item) \
- ret = trace_define_field(event_call, #type, #item, \
- offsetof(typeof(field), item), \
- sizeof(field.item)); \
- if (ret) \
- return ret;
-
-#undef __array
-#define __array(type, item, len) \
- ret = trace_define_field(event_call, #type "[" #len "]", #item, \
- offsetof(typeof(field), item), \
- sizeof(field.item)); \
- if (ret) \
- return ret;
-
-#define __common_field(type, item) \
- ret = trace_define_field(event_call, #type, "common_" #item, \
- offsetof(typeof(field.ent), item), \
- sizeof(field.ent.item)); \
- if (ret) \
- return ret;
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
-int \
-ftrace_define_fields_##call(void) \
-{ \
- struct ftrace_raw_##call field; \
- struct ftrace_event_call *event_call = &event_##call; \
- int ret; \
- \
- __common_field(unsigned char, type); \
- __common_field(unsigned char, flags); \
- __common_field(unsigned char, preempt_count); \
- __common_field(int, pid); \
- __common_field(int, tgid); \
- \
- tstruct; \
- \
- return ret; \
-}
-
-#include <trace/trace_event_types.h>
+++ /dev/null
-/*
- * Stage 3 of the trace events.
- *
- * Override the macros in <trace/trace_event_types.h> to include the following:
- *
- * static void ftrace_event_<call>(proto)
- * {
- * event_trace_printk(_RET_IP_, "<call>: " <fmt>);
- * }
- *
- * static int ftrace_reg_event_<call>(void)
- * {
- * int ret;
- *
- * ret = register_trace_<call>(ftrace_event_<call>);
- * if (!ret)
- * pr_info("event trace: Could not activate trace point "
- * "probe to <call>");
- * return ret;
- * }
- *
- * static void ftrace_unreg_event_<call>(void)
- * {
- * unregister_trace_<call>(ftrace_event_<call>);
- * }
- *
- * For those macros defined with TRACE_FORMAT:
- *
- * static struct ftrace_event_call __used
- * __attribute__((__aligned__(4)))
- * __attribute__((section("_ftrace_events"))) event_<call> = {
- * .name = "<call>",
- * .regfunc = ftrace_reg_event_<call>,
- * .unregfunc = ftrace_unreg_event_<call>,
- * }
- *
- *
- * For those macros defined with TRACE_EVENT:
- *
- * static struct ftrace_event_call event_<call>;
- *
- * static void ftrace_raw_event_<call>(proto)
- * {
- * struct ring_buffer_event *event;
- * struct ftrace_raw_<call> *entry; <-- defined in stage 1
- * unsigned long irq_flags;
- * int pc;
- *
- * local_save_flags(irq_flags);
- * pc = preempt_count();
- *
- * event = trace_current_buffer_lock_reserve(event_<call>.id,
- * sizeof(struct ftrace_raw_<call>),
- * irq_flags, pc);
- * if (!event)
- * return;
- * entry = ring_buffer_event_data(event);
- *
- * <assign>; <-- Here we assign the entries by the __field and
- * __array macros.
- *
- * trace_current_buffer_unlock_commit(event, irq_flags, pc);
- * }
- *
- * static int ftrace_raw_reg_event_<call>(void)
- * {
- * int ret;
- *
- * ret = register_trace_<call>(ftrace_raw_event_<call>);
- * if (!ret)
- * pr_info("event trace: Could not activate trace point "
- * "probe to <call>");
- * return ret;
- * }
- *
- * static void ftrace_unreg_event_<call>(void)
- * {
- * unregister_trace_<call>(ftrace_raw_event_<call>);
- * }
- *
- * static struct trace_event ftrace_event_type_<call> = {
- * .trace = ftrace_raw_output_<call>, <-- stage 2
- * };
- *
- * static int ftrace_raw_init_event_<call>(void)
- * {
- * int id;
- *
- * id = register_ftrace_event(&ftrace_event_type_<call>);
- * if (!id)
- * return -ENODEV;
- * event_<call>.id = id;
- * return 0;
- * }
- *
- * static struct ftrace_event_call __used
- * __attribute__((__aligned__(4)))
- * __attribute__((section("_ftrace_events"))) event_<call> = {
- * .name = "<call>",
- * .system = "<system>",
- * .raw_init = ftrace_raw_init_event_<call>,
- * .regfunc = ftrace_reg_event_<call>,
- * .unregfunc = ftrace_unreg_event_<call>,
- * .show_format = ftrace_format_<call>,
- * }
- *
- */
-
-#undef TP_FMT
-#define TP_FMT(fmt, args...) fmt "\n", ##args
-
-#ifdef CONFIG_EVENT_PROFILE
-#define _TRACE_PROFILE(call, proto, args) \
-static void ftrace_profile_##call(proto) \
-{ \
- extern void perf_tpcounter_event(int); \
- perf_tpcounter_event(event_##call.id); \
-} \
- \
-static int ftrace_profile_enable_##call(struct ftrace_event_call *call) \
-{ \
- int ret = 0; \
- \
- if (!atomic_inc_return(&call->profile_count)) \
- ret = register_trace_##call(ftrace_profile_##call); \
- \
- return ret; \
-} \
- \
-static void ftrace_profile_disable_##call(struct ftrace_event_call *call) \
-{ \
- if (atomic_add_negative(-1, &call->profile_count)) \
- unregister_trace_##call(ftrace_profile_##call); \
-}
-
-#define _TRACE_PROFILE_INIT(call) \
- .profile_count = ATOMIC_INIT(-1), \
- .profile_enable = ftrace_profile_enable_##call, \
- .profile_disable = ftrace_profile_disable_##call,
-
-#else
-#define _TRACE_PROFILE(call, proto, args)
-#define _TRACE_PROFILE_INIT(call)
-#endif
-
-#define _TRACE_FORMAT(call, proto, args, fmt) \
-static void ftrace_event_##call(proto) \
-{ \
- event_trace_printk(_RET_IP_, #call ": " fmt); \
-} \
- \
-static int ftrace_reg_event_##call(void) \
-{ \
- int ret; \
- \
- ret = register_trace_##call(ftrace_event_##call); \
- if (ret) \
- pr_info("event trace: Could not activate trace point " \
- "probe to " #call "\n"); \
- return ret; \
-} \
- \
-static void ftrace_unreg_event_##call(void) \
-{ \
- unregister_trace_##call(ftrace_event_##call); \
-} \
- \
-static struct ftrace_event_call event_##call; \
- \
-static int ftrace_init_event_##call(void) \
-{ \
- int id; \
- \
- id = register_ftrace_event(NULL); \
- if (!id) \
- return -ENODEV; \
- event_##call.id = id; \
- return 0; \
-}
-
-#undef TRACE_FORMAT
-#define TRACE_FORMAT(call, proto, args, fmt) \
-_TRACE_FORMAT(call, PARAMS(proto), PARAMS(args), PARAMS(fmt)) \
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args)) \
-static struct ftrace_event_call __used \
-__attribute__((__aligned__(4))) \
-__attribute__((section("_ftrace_events"))) event_##call = { \
- .name = #call, \
- .system = __stringify(TRACE_SYSTEM), \
- .raw_init = ftrace_init_event_##call, \
- .regfunc = ftrace_reg_event_##call, \
- .unregfunc = ftrace_unreg_event_##call, \
- _TRACE_PROFILE_INIT(call) \
-}
-
-#undef __entry
-#define __entry entry
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args)) \
- \
-static struct ftrace_event_call event_##call; \
- \
-static void ftrace_raw_event_##call(proto) \
-{ \
- struct ftrace_event_call *call = &event_##call; \
- struct ring_buffer_event *event; \
- struct ftrace_raw_##call *entry; \
- unsigned long irq_flags; \
- int pc; \
- \
- local_save_flags(irq_flags); \
- pc = preempt_count(); \
- \
- event = trace_current_buffer_lock_reserve(event_##call.id, \
- sizeof(struct ftrace_raw_##call), \
- irq_flags, pc); \
- if (!event) \
- return; \
- entry = ring_buffer_event_data(event); \
- \
- assign; \
- \
- if (call->preds && !filter_match_preds(call, entry)) \
- ring_buffer_event_discard(event); \
- \
- trace_nowake_buffer_unlock_commit(event, irq_flags, pc); \
- \
-} \
- \
-static int ftrace_raw_reg_event_##call(void) \
-{ \
- int ret; \
- \
- ret = register_trace_##call(ftrace_raw_event_##call); \
- if (ret) \
- pr_info("event trace: Could not activate trace point " \
- "probe to " #call "\n"); \
- return ret; \
-} \
- \
-static void ftrace_raw_unreg_event_##call(void) \
-{ \
- unregister_trace_##call(ftrace_raw_event_##call); \
-} \
- \
-static struct trace_event ftrace_event_type_##call = { \
- .trace = ftrace_raw_output_##call, \
-}; \
- \
-static int ftrace_raw_init_event_##call(void) \
-{ \
- int id; \
- \
- id = register_ftrace_event(&ftrace_event_type_##call); \
- if (!id) \
- return -ENODEV; \
- event_##call.id = id; \
- INIT_LIST_HEAD(&event_##call.fields); \
- return 0; \
-} \
- \
-static struct ftrace_event_call __used \
-__attribute__((__aligned__(4))) \
-__attribute__((section("_ftrace_events"))) event_##call = { \
- .name = #call, \
- .system = __stringify(TRACE_SYSTEM), \
- .raw_init = ftrace_raw_init_event_##call, \
- .regfunc = ftrace_raw_reg_event_##call, \
- .unregfunc = ftrace_raw_unreg_event_##call, \
- .show_format = ftrace_format_##call, \
- .define_fields = ftrace_define_fields_##call, \
- _TRACE_PROFILE_INIT(call) \
-}
-
-#include <trace/trace_event_types.h>
-
-#undef _TRACE_PROFILE
-#undef _TRACE_PROFILE_INIT
-
#undef TRACE_STRUCT
#define TRACE_STRUCT(args...) args
+extern void __bad_type_size(void);
+
#undef TRACE_FIELD
#define TRACE_FIELD(type, item, assign) \
+ if (sizeof(type) != sizeof(field.item)) \
+ __bad_type_size(); \
ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t" \
"offset:%u;\tsize:%u;\n", \
(unsigned int)offsetof(typeof(field), item), \
#undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type_item, item, cmd) \
+#define TRACE_FIELD_SPECIAL(type_item, item, len, cmd) \
ret = trace_seq_printf(s, "\tfield special:" #type_item ";\t" \
"offset:%u;\tsize:%u;\n", \
(unsigned int)offsetof(typeof(field), item), \
if (!ret) \
return 0;
+#undef TRACE_FIELD_SIGN
+#define TRACE_FIELD_SIGN(type, item, assign, is_signed) \
+ TRACE_FIELD(type, item, assign)
#undef TP_RAW_FMT
#define TP_RAW_FMT(args...) args
return ret; \
}
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, \
+ tpfmt) \
+static int \
+ftrace_format_##call(struct trace_seq *s) \
+{ \
+ struct args field; \
+ int ret; \
+ \
+ tstruct; \
+ \
+ trace_seq_printf(s, "\nprint fmt: \"%s\"\n", tpfmt); \
+ \
+ return ret; \
+}
+
#include "trace_event_types.h"
#undef TRACE_ZERO_CHAR
#define TRACE_FIELD(type, item, assign)\
entry->item = assign;
+#undef TRACE_FIELD_SIGN
+#define TRACE_FIELD_SIGN(type, item, assign, is_signed) \
+ TRACE_FIELD(type, item, assign)
+
#undef TP_CMD
#define TP_CMD(cmd...) cmd
#define TRACE_ENTRY entry
#undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type_item, item, cmd) \
+#define TRACE_FIELD_SPECIAL(type_item, item, len, cmd) \
cmd;
#undef TRACE_EVENT_FORMAT
#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt) \
+int ftrace_define_fields_##call(void); \
+static int ftrace_raw_init_event_##call(void); \
+ \
+struct ftrace_event_call __used \
+__attribute__((__aligned__(4))) \
+__attribute__((section("_ftrace_events"))) event_##call = { \
+ .name = #call, \
+ .id = proto, \
+ .system = __stringify(TRACE_SYSTEM), \
+ .raw_init = ftrace_raw_init_event_##call, \
+ .show_format = ftrace_format_##call, \
+ .define_fields = ftrace_define_fields_##call, \
+}; \
+static int ftrace_raw_init_event_##call(void) \
+{ \
+ INIT_LIST_HEAD(&event_##call.fields); \
+ init_preds(&event_##call); \
+ return 0; \
+} \
+
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, \
+ tpfmt) \
\
-static struct ftrace_event_call __used \
+struct ftrace_event_call __used \
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_events"))) event_##call = { \
.name = #call, \
.id = proto, \
.system = __stringify(TRACE_SYSTEM), \
.show_format = ftrace_format_##call, \
+};
+
+#include "trace_event_types.h"
+
+#undef TRACE_FIELD
+#define TRACE_FIELD(type, item, assign) \
+ ret = trace_define_field(event_call, #type, #item, \
+ offsetof(typeof(field), item), \
+ sizeof(field.item), is_signed_type(type)); \
+ if (ret) \
+ return ret;
+
+#undef TRACE_FIELD_SPECIAL
+#define TRACE_FIELD_SPECIAL(type, item, len, cmd) \
+ ret = trace_define_field(event_call, #type "[" #len "]", #item, \
+ offsetof(typeof(field), item), \
+ sizeof(field.item), 0); \
+ if (ret) \
+ return ret;
+
+#undef TRACE_FIELD_SIGN
+#define TRACE_FIELD_SIGN(type, item, assign, is_signed) \
+ ret = trace_define_field(event_call, #type, #item, \
+ offsetof(typeof(field), item), \
+ sizeof(field.item), is_signed); \
+ if (ret) \
+ return ret;
+
+#undef TRACE_FIELD_ZERO_CHAR
+#define TRACE_FIELD_ZERO_CHAR(item)
+
+#undef TRACE_EVENT_FORMAT
+#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt) \
+int \
+ftrace_define_fields_##call(void) \
+{ \
+ struct ftrace_event_call *event_call = &event_##call; \
+ struct args field; \
+ int ret; \
+ \
+ __common_field(unsigned char, type, 0); \
+ __common_field(unsigned char, flags, 0); \
+ __common_field(unsigned char, preempt_count, 0); \
+ __common_field(int, pid, 1); \
+ __common_field(int, tgid, 1); \
+ \
+ tstruct; \
+ \
+ return ret; \
}
+
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, \
+ tpfmt)
+
#include "trace_event_types.h"
current->ret_stack[index].ret = ret;
current->ret_stack[index].func = func;
current->ret_stack[index].calltime = calltime;
+ current->ret_stack[index].subtime = 0;
*depth = index;
return 0;
}
/* Retrieve a function return address to the trace stack on thread info.*/
-void
+static void
ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
{
int index;
trace->calltime = current->ret_stack[index].calltime;
trace->overrun = atomic_read(¤t->trace_overrun);
trace->depth = index;
- barrier();
- current->curr_ret_stack--;
-
}
/*
ftrace_pop_return_trace(&trace, &ret);
trace.rettime = trace_clock_local();
ftrace_graph_return(&trace);
+ barrier();
+ current->curr_ret_stack--;
if (unlikely(!ret)) {
ftrace_graph_stop();
return TRACE_TYPE_HANDLED;
}
-static enum print_line_t
-print_graph_duration(unsigned long long duration, struct trace_seq *s)
+enum print_line_t
+trace_print_graph_duration(unsigned long long duration, struct trace_seq *s)
{
unsigned long nsecs_rem = do_div(duration, 1000);
/* log10(ULONG_MAX) + '\0' */
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
}
+ return TRACE_TYPE_HANDLED;
+}
+
+static enum print_line_t
+print_graph_duration(unsigned long long duration, struct trace_seq *s)
+{
+ int ret;
+
+ ret = trace_print_graph_duration(duration, s);
+ if (ret != TRACE_TYPE_HANDLED)
+ return ret;
ret = trace_seq_printf(s, "| ");
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
- return TRACE_TYPE_HANDLED;
+ return TRACE_TYPE_HANDLED;
}
/* Case of a leaf function on its call entry */
void trace_hw_branch(u64 from, u64 to)
{
+ struct ftrace_event_call *call = &event_hw_branch;
struct trace_array *tr = hw_branch_trace;
struct ring_buffer_event *event;
struct hw_branch_entry *entry;
entry->ent.type = TRACE_HW_BRANCHES;
entry->from = from;
entry->to = to;
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ trace_buffer_unlock_commit(tr, event, 0, 0);
out:
atomic_dec(&tr->data[cpu]->disabled);
#include <linux/kernel.h>
#include <linux/mmiotrace.h>
#include <linux/pci.h>
+#include <linux/time.h>
+
#include <asm/atomic.h>
#include "trace.h"
struct mmiotrace_rw *rw;
struct trace_seq *s = &iter->seq;
unsigned long long t = ns2usecs(iter->ts);
- unsigned long usec_rem = do_div(t, 1000000ULL);
+ unsigned long usec_rem = do_div(t, USEC_PER_SEC);
unsigned secs = (unsigned long)t;
int ret = 1;
struct mmiotrace_map *m;
struct trace_seq *s = &iter->seq;
unsigned long long t = ns2usecs(iter->ts);
- unsigned long usec_rem = do_div(t, 1000000ULL);
+ unsigned long usec_rem = do_div(t, USEC_PER_SEC);
unsigned secs = (unsigned long)t;
int ret;
static int next_event_type = __TRACE_LAST_TYPE + 1;
+void trace_print_seq(struct seq_file *m, struct trace_seq *s)
+{
+ int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
+
+ s->buffer[len] = 0;
+ seq_puts(m, s->buffer);
+
+ trace_seq_init(s);
+}
+
enum print_line_t trace_print_bprintk_msg_only(struct trace_iterator *iter)
{
struct trace_seq *s = &iter->seq;
return len;
}
+EXPORT_SYMBOL_GPL(trace_seq_printf);
int trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
{
return NULL;
}
+static LIST_HEAD(ftrace_event_list);
+
+static int trace_search_list(struct list_head **list)
+{
+ struct trace_event *e;
+ int last = __TRACE_LAST_TYPE;
+
+ if (list_empty(&ftrace_event_list)) {
+ *list = &ftrace_event_list;
+ return last + 1;
+ }
+
+ /*
+ * We used up all possible max events,
+ * lets see if somebody freed one.
+ */
+ list_for_each_entry(e, &ftrace_event_list, list) {
+ if (e->type != last + 1)
+ break;
+ last++;
+ }
+
+ /* Did we used up all 65 thousand events??? */
+ if ((last + 1) > FTRACE_MAX_EVENT)
+ return 0;
+
+ *list = &e->list;
+ return last + 1;
+}
+
/**
* register_ftrace_event - register output for an event type
* @event: the event type to register
mutex_lock(&trace_event_mutex);
- if (!event) {
- ret = next_event_type++;
+ if (WARN_ON(!event))
goto out;
- }
- if (!event->type)
- event->type = next_event_type++;
- else if (event->type > __TRACE_LAST_TYPE) {
+ INIT_LIST_HEAD(&event->list);
+
+ if (!event->type) {
+ struct list_head *list = NULL;
+
+ if (next_event_type > FTRACE_MAX_EVENT) {
+
+ event->type = trace_search_list(&list);
+ if (!event->type)
+ goto out;
+
+ } else {
+
+ event->type = next_event_type++;
+ list = &ftrace_event_list;
+ }
+
+ if (WARN_ON(ftrace_find_event(event->type)))
+ goto out;
+
+ list_add_tail(&event->list, list);
+
+ } else if (event->type > __TRACE_LAST_TYPE) {
printk(KERN_WARNING "Need to add type to trace.h\n");
WARN_ON(1);
- }
-
- if (ftrace_find_event(event->type))
goto out;
+ } else {
+ /* Is this event already used */
+ if (ftrace_find_event(event->type))
+ goto out;
+ }
if (event->trace == NULL)
event->trace = trace_nop_print;
return ret;
}
+EXPORT_SYMBOL_GPL(register_ftrace_event);
/**
* unregister_ftrace_event - remove a no longer used event
{
mutex_lock(&trace_event_mutex);
hlist_del(&event->node);
+ list_del(&event->list);
mutex_unlock(&trace_event_mutex);
return 0;
}
+EXPORT_SYMBOL_GPL(unregister_ftrace_event);
/*
* Standard events
#ifndef __TRACE_EVENTS_H
#define __TRACE_EVENTS_H
+#include <linux/trace_seq.h>
#include "trace.h"
-typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
- int flags);
-
-struct trace_event {
- struct hlist_node node;
- int type;
- trace_print_func trace;
- trace_print_func raw;
- trace_print_func hex;
- trace_print_func binary;
-};
-
extern enum print_line_t
trace_print_bprintk_msg_only(struct trace_iterator *iter);
extern enum print_line_t
trace_print_printk_msg_only(struct trace_iterator *iter);
-extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int
-trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
extern int
seq_print_ip_sym(struct trace_seq *s, unsigned long ip,
unsigned long sym_flags);
-extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
- size_t cnt);
-extern int trace_seq_puts(struct trace_seq *s, const char *str);
-extern int trace_seq_putc(struct trace_seq *s, unsigned char c);
-extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len);
-extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
- size_t len);
-extern void *trace_seq_reserve(struct trace_seq *s, size_t len);
-extern int trace_seq_path(struct trace_seq *s, struct path *path);
extern int seq_print_userip_objs(const struct userstack_entry *entry,
struct trace_seq *s, unsigned long sym_flags);
extern int seq_print_user_ip(struct trace_seq *s, struct mm_struct *mm,
extern int trace_print_lat_context(struct trace_iterator *iter);
extern struct trace_event *ftrace_find_event(int type);
-extern int register_ftrace_event(struct trace_event *event);
-extern int unregister_ftrace_event(struct trace_event *event);
extern enum print_line_t trace_nop_print(struct trace_iterator *iter,
int flags);
static void probe_power_end(struct power_trace *it)
{
+ struct ftrace_event_call *call = &event_power;
struct ring_buffer_event *event;
struct trace_power *entry;
struct trace_array_cpu *data;
goto out;
entry = ring_buffer_event_data(event);
entry->state_data = *it;
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ trace_buffer_unlock_commit(tr, event, 0, 0);
out:
preempt_enable();
}
static void probe_power_mark(struct power_trace *it, unsigned int type,
unsigned int level)
{
+ struct ftrace_event_call *call = &event_power;
struct ring_buffer_event *event;
struct trace_power *entry;
struct trace_array_cpu *data;
goto out;
entry = ring_buffer_event_data(event);
entry->state_data = *it;
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ if (!filter_check_discard(call, entry, tr->buffer, event))
+ trace_buffer_unlock_commit(tr, event, 0, 0);
out:
preempt_enable();
}
static __init int init_trace_printk_function_export(void)
{
struct dentry *d_tracer;
- struct dentry *entry;
d_tracer = tracing_init_dentry();
if (!d_tracer)
return 0;
- entry = debugfs_create_file("printk_formats", 0444, d_tracer,
+ trace_create_file("printk_formats", 0444, d_tracer,
NULL, &ftrace_formats_fops);
- if (!entry)
- pr_warning("Could not create debugfs "
- "'printk_formats' entry\n");
return 0;
}
#include <linux/kallsyms.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
#include "trace.h"
int cpu;
int pc;
- if (!sched_ref || sched_stopped)
+ if (unlikely(!sched_ref))
return;
tracing_record_cmdline(prev);
tracing_record_cmdline(next);
- if (!tracer_enabled)
+ if (!tracer_enabled || sched_stopped)
return;
pc = preempt_count();
unsigned long flags;
int cpu, pc;
- if (!likely(tracer_enabled))
+ if (unlikely(!sched_ref))
return;
- pc = preempt_count();
tracing_record_cmdline(current);
- if (sched_stopped)
+ if (!tracer_enabled || sched_stopped)
return;
+ pc = preempt_count();
local_irq_save(flags);
cpu = raw_smp_processor_id();
data = ctx_trace->data[cpu];
#include <linux/kallsyms.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
#include "trace.h"
pc = preempt_count();
- /* The task we are waiting for is waking up */
- data = wakeup_trace->data[wakeup_cpu];
-
/* disable local data, not wakeup_cpu data */
cpu = raw_smp_processor_id();
disabled = atomic_inc_return(&wakeup_trace->data[cpu]->disabled);
if (unlikely(!tracer_enabled || next != wakeup_task))
goto out_unlock;
+ /* The task we are waiting for is waking up */
+ data = wakeup_trace->data[wakeup_cpu];
+
trace_function(wakeup_trace, CALLER_ADDR0, CALLER_ADDR1, flags, pc);
tracing_sched_switch_trace(wakeup_trace, prev, next, flags, pc);
static __init int stack_trace_init(void)
{
struct dentry *d_tracer;
- struct dentry *entry;
d_tracer = tracing_init_dentry();
- entry = debugfs_create_file("stack_max_size", 0644, d_tracer,
- &max_stack_size, &stack_max_size_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'stack_max_size' entry\n");
+ trace_create_file("stack_max_size", 0644, d_tracer,
+ &max_stack_size, &stack_max_size_fops);
- entry = debugfs_create_file("stack_trace", 0444, d_tracer,
- NULL, &stack_trace_fops);
- if (!entry)
- pr_warning("Could not create debugfs 'stack_trace' entry\n");
+ trace_create_file("stack_trace", 0444, d_tracer,
+ NULL, &stack_trace_fops);
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
if (!ts->stat_cmp)
ts->stat_cmp = dummy_cmp;
- stat = ts->stat_start();
+ stat = ts->stat_start(ts);
if (!stat)
goto exit;
/* The name of your stat file */
const char *name;
/* Iteration over statistic entries */
- void *(*stat_start)(void);
+ void *(*stat_start)(struct tracer_stat *trace);
void *(*stat_next)(void *prev, int idx);
/* Compare two entries for stats sorting */
int (*stat_cmp)(void *p1, void *p2);
void init_tracer_sysprof_debugfs(struct dentry *d_tracer)
{
- struct dentry *entry;
- entry = debugfs_create_file("sysprof_sample_period", 0644,
+ trace_create_file("sysprof_sample_period", 0644,
d_tracer, NULL, &sysprof_sample_fops);
- if (entry)
- return;
- pr_warning("Could not create debugfs 'sysprof_sample_period' entry\n");
}
return ret;
}
-static void *workqueue_stat_start(void)
+static void *workqueue_stat_start(struct tracer_stat *trace)
{
int cpu;
void *ret = NULL;
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390
select KALLSYMS
select KALLSYMS_ALL
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && \
- (CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+ (CRIS || M68K || M68KNOMMU || FRV || UML || \
AVR32 || SUPERH || BLACKFIN || MN10300) || \
ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !PPC
+ select FRAME_POINTER if !PPC && !S390
help
Provide stacktrace filter for fault-injection capabilities
config LATENCYTOP
bool "Latency measuring infrastructure"
- select FRAME_POINTER if !MIPS && !PPC
+ select FRAME_POINTER if !MIPS && !PPC && !S390
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o
lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
+obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
return -ENOMEM;
}
-static int device_dma_allocations(struct device *dev)
-{
- struct dma_debug_entry *entry;
- unsigned long flags;
- int count = 0, i;
-
- for (i = 0; i < HASH_SIZE; ++i) {
- spin_lock_irqsave(&dma_entry_hash[i].lock, flags);
- list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
- if (entry->dev == dev)
- count += 1;
- }
- spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags);
- }
-
- return count;
-}
-
-static int dma_debug_device_change(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- int count;
-
-
- switch (action) {
- case BUS_NOTIFY_UNBIND_DRIVER:
- count = device_dma_allocations(dev);
- if (count == 0)
- break;
- err_printk(dev, NULL, "DMA-API: device driver has pending "
- "DMA allocations while released from device "
- "[count=%d]\n", count);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
void dma_debug_add_bus(struct bus_type *bus)
{
- struct notifier_block *nb;
-
- nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
- if (nb == NULL) {
- printk(KERN_ERR "dma_debug_add_bus: out of memory\n");
- return;
- }
-
- nb->notifier_call = dma_debug_device_change;
-
- bus_register_notifier(bus, nb);
+ /* FIXME: register notifier */
}
/*
sg_miter_stop(miter);
/* get to the next sg if necessary. __offset is adjusted by stop */
- if (miter->__offset == miter->__sg->length && --miter->__nents) {
- miter->__sg = sg_next(miter->__sg);
- miter->__offset = 0;
+ while (miter->__offset == miter->__sg->length) {
+ if (--miter->__nents) {
+ miter->__sg = sg_next(miter->__sg);
+ miter->__offset = 0;
+ } else
+ return false;
}
/* map the next page */
if (!file)
return -EBADF;
+ /*
+ * Page cache readahead assumes page cache pages are order-0 which
+ * is not the case for hugetlbfs. Do not give a bad return value
+ * but ignore the advice.
+ */
+ if (vma->vm_flags & VM_HUGETLB)
+ return 0;
+
if (file->f_mapping->a_ops->get_xip_mem) {
/* no bad return value, but ignore advice */
return 0;
return NULL;
pc = lookup_page_cgroup(page);
- /*
- * Used bit of swapcache is solid under page lock.
- */
+ lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
mem = pc->mem_cgroup;
if (mem && !css_tryget(&mem->css))
mem = NULL;
rcu_read_unlock();
}
+ unlock_page_cgroup(pc);
return mem;
}
}
/*
- * A call to try to shrink memory usage under specified resource controller.
- * This is typically used for page reclaiming for shmem for reducing side
- * effect of page allocation from shmem, which is used by some mem_cgroup.
+ * A call to try to shrink memory usage on charge failure at shmem's swapin.
+ * Calling hierarchical_reclaim is not enough because we should update
+ * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM.
+ * Moreover considering hierarchy, we should reclaim from the mem_over_limit,
+ * not from the memcg which this page would be charged to.
+ * try_charge_swapin does all of these works properly.
*/
-int mem_cgroup_shrink_usage(struct page *page,
+int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm,
gfp_t gfp_mask)
{
struct mem_cgroup *mem = NULL;
- int progress = 0;
- int retry = MEM_CGROUP_RECLAIM_RETRIES;
+ int ret;
if (mem_cgroup_disabled())
return 0;
- if (page)
- mem = try_get_mem_cgroup_from_swapcache(page);
- if (!mem && mm)
- mem = try_get_mem_cgroup_from_mm(mm);
- if (unlikely(!mem))
- return 0;
- do {
- progress = mem_cgroup_hierarchical_reclaim(mem,
- gfp_mask, true, false);
- progress += mem_cgroup_check_under_limit(mem);
- } while (!progress && --retry);
+ ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+ if (!ret)
+ mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */
- css_put(&mem->css);
- if (!retry)
- return -ENOMEM;
- return 0;
+ return ret;
}
static DEFINE_MUTEX(set_limit_mutex);
ret = tmp;
goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(old_page);
+ if (!old_page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(old_page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(old_page));
/*
* Since we dropped the lock we need to revalidate
*/
page_table = pte_offset_map_lock(mm, pmd, address,
&ptl);
- page_cache_release(old_page);
- if (!pte_same(*page_table, orig_pte))
+ if (!pte_same(*page_table, orig_pte)) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
goto unlock;
+ }
page_mkwrite = 1;
}
unlock:
pte_unmap_unlock(page_table, ptl);
if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
-
/*
* Yes, Virginia, this is actually required to prevent a race
* with clear_page_dirty_for_io() from clearing the page dirty
*
* do_no_page is protected similarly.
*/
- wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (!page_mkwrite) {
+ wait_on_page_locked(dirty_page);
+ set_page_dirty_balance(dirty_page, page_mkwrite);
+ }
put_page(dirty_page);
+ if (page_mkwrite) {
+ struct address_space *mapping = dirty_page->mapping;
+
+ set_page_dirty(dirty_page);
+ unlock_page(dirty_page);
+ page_cache_release(dirty_page);
+ if (mapping) {
+ /*
+ * Some device drivers do not set page.mapping
+ * but still dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
}
return ret;
oom_free_new:
page_cache_release(new_page);
oom:
- if (old_page)
+ if (old_page) {
+ if (page_mkwrite) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
+ }
page_cache_release(old_page);
+ }
return VM_FAULT_OOM;
unwritable_page:
if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) {
ret = VM_FAULT_OOM;
- unlock_page(page);
- goto out;
+ goto out_page;
}
/*
out_nomap:
mem_cgroup_cancel_charge_swapin(ptr);
pte_unmap_unlock(page_table, ptl);
+out_page:
unlock_page(page);
page_cache_release(page);
return ret;
int tmp;
unlock_page(page);
- vmf.flags |= FAULT_FLAG_MKWRITE;
+ vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
tmp = vma->vm_ops->page_mkwrite(vma, &vmf);
if (unlikely(tmp &
(VM_FAULT_ERROR | VM_FAULT_NOPAGE))) {
ret = tmp;
- anon = 1; /* no anon but release vmf.page */
- goto out_unlocked;
- }
- lock_page(page);
- /*
- * XXX: this is not quite right (racy vs
- * invalidate) to unlock and relock the page
- * like this, however a better fix requires
- * reworking page_mkwrite locking API, which
- * is better done later.
- */
- if (!page->mapping) {
- ret = 0;
- anon = 1; /* no anon but release vmf.page */
- goto out;
+ goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(page);
+ if (!page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(page));
page_mkwrite = 1;
}
}
pte_unmap_unlock(page_table, ptl);
out:
- unlock_page(vmf.page);
-out_unlocked:
- if (anon)
- page_cache_release(vmf.page);
- else if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
+ if (dirty_page) {
+ struct address_space *mapping = page->mapping;
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (set_page_dirty(dirty_page))
+ page_mkwrite = 1;
+ unlock_page(dirty_page);
put_page(dirty_page);
+ if (page_mkwrite && mapping) {
+ /*
+ * Some device drivers do not set page.mapping but still
+ * dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
+ } else {
+ unlock_page(vmf.page);
+ if (anon)
+ page_cache_release(vmf.page);
}
return ret;
+
+unwritable_page:
+ page_cache_release(page);
+ return ret;
}
static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
/*
* Check that a process has enough memory to allocate a new virtual
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
error:
vm_unacct_memory(pages);
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
}
struct page *mem_map;
unsigned long max_mapnr;
unsigned long num_physpages;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC);
}
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
+
error:
vm_unacct_memory(pages);
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
if (error == -ENOMEM) {
- /* allow reclaim from this memory cgroup */
- error = mem_cgroup_shrink_usage(swappage,
+ /*
+ * reclaim from proper memory cgroup and
+ * call memcg's OOM if needed.
+ */
+ error = mem_cgroup_shmem_charge_fallback(
+ swappage,
current->mm,
gfp);
if (error) {
#include <linux/cpu.h>
#include <linux/sysctl.h>
#include <linux/module.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
#include <linux/rcupdate.h>
#include <linux/string.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
#include <asm/atomic.h>
/*
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/mempolicy.h>
EXPORT_SYMBOL(pagevec_lookup_tag);
-#ifdef CONFIG_SMP
-/*
- * We tolerate a little inaccuracy to avoid ping-ponging the counter between
- * CPUs
- */
-#define ACCT_THRESHOLD max(16, NR_CPUS * 2)
-
-static DEFINE_PER_CPU(long, committed_space);
-
-void vm_acct_memory(long pages)
-{
- long *local;
-
- preempt_disable();
- local = &__get_cpu_var(committed_space);
- *local += pages;
- if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_long_add(*local, &vm_committed_space);
- *local = 0;
- }
- preempt_enable();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Drop the CPU's cached committed space back into the central pool. */
-static int cpu_swap_callback(struct notifier_block *nfb,
- unsigned long action,
- void *hcpu)
-{
- long *committed;
-
- committed = &per_cpu(committed_space, (long)hcpu);
- if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_long_add(*committed, &vm_committed_space);
- *committed = 0;
- drain_cpu_pagevecs((long)hcpu);
- }
- return NOTIFY_OK;
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-#endif /* CONFIG_SMP */
-
/*
* Perform any setup for the swap system
*/
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
-#ifdef CONFIG_HOTPLUG_CPU
- hotcpu_notifier(cpu_swap_callback, 0);
-#endif
}
#include <linux/module.h>
#include <linux/err.h>
#include <linux/sched.h>
-#include <linux/tracepoint.h>
#include <asm/uaccess.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/kmem.h>
+
/**
* kstrdup - allocate space for and copy an existing string
* @s: the string to duplicate
EXPORT_SYMBOL_GPL(get_user_pages_fast);
/* Tracepoints definitions. */
-DEFINE_TRACE(kmalloc);
-DEFINE_TRACE(kmem_cache_alloc);
-DEFINE_TRACE(kmalloc_node);
-DEFINE_TRACE(kmem_cache_alloc_node);
-DEFINE_TRACE(kfree);
-DEFINE_TRACE(kmem_cache_free);
-
EXPORT_TRACEPOINT_SYMBOL(kmalloc);
EXPORT_TRACEPOINT_SYMBOL(kmem_cache_alloc);
EXPORT_TRACEPOINT_SYMBOL(kmalloc_node);
for_each_evictable_lru(l) {
int file = is_file_lru(l);
- int scan;
+ unsigned long scan;
scan = zone_nr_pages(zone, sc, l);
if (priority) {
continue;
dev_change_flags(vlandev, flgs & ~IFF_UP);
+ vlan_transfer_operstate(dev, vlandev);
}
break;
continue;
dev_change_flags(vlandev, flgs | IFF_UP);
+ vlan_transfer_operstate(dev, vlandev);
}
break;
if (vlan->flags & VLAN_FLAG_GVRP)
vlan_gvrp_request_join(dev);
+ netif_carrier_on(dev);
return 0;
clear_allmulti:
if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
out:
+ netif_carrier_off(dev);
return err;
}
if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len);
+ netif_carrier_off(dev);
return 0;
}
struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
int subclass = 0;
+ netif_carrier_off(dev);
+
/* IFF_BROADCAST|IFF_MULTICAST; ??? */
dev->flags = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI);
dev->iflink = real_dev->ifindex;
const struct vlan_dev_info *vlan = vlan_dev_info(dev);
struct net_device *real_dev = vlan->real_dev;
- if (!real_dev->ethtool_ops->get_settings)
+ if (!real_dev->ethtool_ops ||
+ !real_dev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
return real_dev->ethtool_ops->get_settings(real_dev, cmd);
p9pdu_reset(req->tc);
p9pdu_reset(req->rc);
- req->flush_tag = 0;
req->tc->tag = tag-1;
req->status = REQ_STATUS_ALLOC;
*/
void p9_client_cb(struct p9_client *c, struct p9_req_t *req)
{
- struct p9_req_t *other_req;
- unsigned long flags;
-
P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag);
-
- if (req->status == REQ_STATUS_ERROR)
- wake_up(req->wq);
-
- if (req->flush_tag) { /* flush receive path */
- P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- other_req = p9_tag_lookup(c, req->flush_tag);
- if (other_req->status != REQ_STATUS_FLSH) /* stale flush */
- spin_unlock_irqrestore(&c->lock, flags);
- else {
- other_req->status = REQ_STATUS_FLSHD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(other_req->wq);
- }
- p9_free_req(c, req);
- } else { /* normal receive path */
- P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- if (req->status != REQ_STATUS_FLSHD)
- req->status = REQ_STATUS_RCVD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(req->wq);
- P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
- }
+ wake_up(req->wq);
+ P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
}
EXPORT_SYMBOL(p9_client_cb);
if (IS_ERR(req))
return PTR_ERR(req);
- req->flush_tag = oldtag;
- /* we don't free anything here because RPC isn't complete */
+ /* if we haven't received a response for oldreq,
+ remove it from the list. */
+ spin_lock(&c->lock);
+ if (oldreq->status == REQ_STATUS_FLSH)
+ list_del(&oldreq->req_list);
+ spin_unlock(&c->lock);
+
+ p9_free_req(c, req);
return 0;
}
struct p9_req_t *req;
unsigned long flags;
int sigpending;
- int flushed = 0;
P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type);
goto reterr;
}
- /* if it was a flush we just transmitted, return our tag */
- if (type == P9_TFLUSH)
- return req;
-again:
P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag);
err = wait_event_interruptible(*req->wq,
req->status >= REQ_STATUS_RCVD);
- P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n",
- req->wq, tag, err, flushed);
+ P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n",
+ req->wq, tag, err);
if (req->status == REQ_STATUS_ERROR) {
P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err);
err = req->t_err;
- } else if (err == -ERESTARTSYS && flushed) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n");
- goto again;
- } else if (req->status == REQ_STATUS_FLSHD) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n");
- err = -ERESTARTSYS;
}
- if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) {
+ if ((err == -ERESTARTSYS) && (c->status == Connected)) {
P9_DPRINTK(P9_DEBUG_MUX, "flushing\n");
- spin_lock_irqsave(&c->lock, flags);
- if (req->status == REQ_STATUS_SENT)
- req->status = REQ_STATUS_FLSH;
- spin_unlock_irqrestore(&c->lock, flags);
sigpending = 1;
- flushed = 1;
clear_thread_flag(TIF_SIGPENDING);
- if (c->trans_mod->cancel(c, req)) {
- err = p9_client_flush(c, req);
- if (err == 0)
- goto again;
- }
+ if (c->trans_mod->cancel(c, req))
+ p9_client_flush(c, req);
+
+ /* if we received the response anyway, don't signal error */
+ if (req->status == REQ_STATUS_RCVD)
+ err = 0;
}
if (sigpending) {
ret->name, ret->uid, ret->gid, ret->muid, ret->extension,
ret->n_uid, ret->n_gid, ret->n_muid);
+ p9_free_req(clnt, req);
+ return ret;
+
free_and_error:
p9_free_req(clnt, req);
error:
- return ret;
+ kfree(ret);
+ return ERR_PTR(err);
}
EXPORT_SYMBOL(p9_client_stat);
+static int p9_client_statsize(struct p9_wstat *wst, int optional)
+{
+ int ret;
+
+ /* size[2] type[2] dev[4] qid[13] */
+ /* mode[4] atime[4] mtime[4] length[8]*/
+ /* name[s] uid[s] gid[s] muid[s] */
+ ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+
+ if (wst->name)
+ ret += strlen(wst->name);
+ if (wst->uid)
+ ret += strlen(wst->uid);
+ if (wst->gid)
+ ret += strlen(wst->gid);
+ if (wst->muid)
+ ret += strlen(wst->muid);
+
+ if (optional) {
+ ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */
+ if (wst->extension)
+ ret += strlen(wst->extension);
+ }
+
+ return ret;
+}
+
int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
{
int err;
struct p9_req_t *req;
struct p9_client *clnt;
+ err = 0;
+ clnt = fid->clnt;
+ wst->size = p9_client_statsize(wst, clnt->dotu);
P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid);
P9_DPRINTK(P9_DEBUG_9P,
" sz=%x type=%x dev=%x qid=%x.%llx.%x\n"
wst->atime, wst->mtime, (unsigned long long)wst->length,
wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
wst->n_uid, wst->n_gid, wst->n_muid);
- err = 0;
- clnt = fid->clnt;
- req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst);
+ req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto error;
spin_unlock_irqrestore(&m->client->lock, flags);
list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
- list_del(&req->req_list);
P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req);
+ list_del(&req->req_list);
p9_client_cb(m->client, req);
}
}
"mux %p pkt: size: %d bytes tag: %d\n", m, n, tag);
m->req = p9_tag_lookup(m->client, tag);
- if (!m->req) {
+ if (!m->req || (m->req->status != REQ_STATUS_SENT &&
+ m->req->status != REQ_STATUS_FLSH)) {
P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n",
tag);
err = -EIO;
if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */
P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n");
spin_lock(&m->client->lock);
+ if (m->req->status != REQ_STATUS_ERROR)
+ m->req->status = REQ_STATUS_RCVD;
list_del(&m->req->req_list);
spin_unlock(&m->client->lock);
p9_client_cb(m->client, m->req);
-
m->rbuf = NULL;
m->rpos = 0;
m->rsize = 0;
req = list_entry(m->unsent_req_list.next, struct p9_req_t,
req_list);
req->status = REQ_STATUS_SENT;
+ P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req);
list_move_tail(&req->req_list, &m->req_list);
m->wbuf = req->tc->sdata;
P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
spin_lock(&client->lock);
- list_del(&req->req_list);
if (req->status == REQ_STATUS_UNSENT) {
+ list_del(&req->req_list);
req->status = REQ_STATUS_FLSHD;
ret = 0;
- }
+ } else if (req->status == REQ_STATUS_SENT)
+ req->status = REQ_STATUS_FLSH;
spin_unlock(&client->lock);
goto err_out;
req->rc = c->rc;
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(client, req);
return;
P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc);
P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag);
req = p9_tag_lookup(chan->client, rc->tag);
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(chan->client, req);
}
}
struct br2684_dev *brdev = BRPRIV(netdev);
ether_setup(netdev);
+ brdev->net_dev = netdev;
netdev->netdev_ops = &br2684_netdev_ops;
{
struct ax25_uid_assoc *pt;
struct hlist_node *node;
- int i = 0;
+ int i = 1;
read_lock(&ax25_uid_lock);
+
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
ax25_uid_for_each(pt, node, &ax25_uid_list) {
if (i == *pos)
return pt;
static void *ax25_uid_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
++*pos;
-
- return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next,
+ if (v == SEQ_START_TOKEN)
+ return ax25_uid_list.first;
+ else
+ return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next,
ax25_uid_assoc, uid_node);
}
conn->state = BT_OPEN;
conn->power_save = 1;
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
switch (type) {
case ACL_LINK:
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
+ hci_conn_init_sysfs(conn);
+
tasklet_enable(&hdev->tx_task);
return conn;
if (sec_level == BT_SECURITY_SDP)
return 1;
- if (sec_level == BT_SECURITY_LOW) {
- if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0)
- return hci_conn_auth(conn, sec_level, auth_type);
- else
- return 1;
- }
+ if (sec_level == BT_SECURITY_LOW &&
+ (!conn->ssp_mode || !conn->hdev->ssp_mode))
+ return 1;
if (conn->link_mode & HCI_LM_ENCRYPT)
return hci_conn_auth(conn, sec_level, auth_type);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
- if (!conn)
- goto unlock;
+ if (!conn) {
+ if (ev->link_type != SCO_LINK)
+ goto unlock;
+
+ conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
+ if (!conn)
+ goto unlock;
+
+ conn->type = SCO_LINK;
+ }
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
if (conn->type == ACL_LINK) {
conn->state = BT_CONFIG;
hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
} else
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
}
- } else
+ } else {
hci_auth_cfm(conn, ev->status);
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
if (!ev->status) {
struct hci_cp_set_conn_encrypt cp;
static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
+ struct hci_ev_pin_code_req *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
BT_DBG("%s", hdev->name);
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+ if (conn) {
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_PAIRING_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+ hci_dev_unlock(hdev);
}
static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
static inline void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
+ struct hci_ev_link_key_notify *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
BT_DBG("%s", hdev->name);
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+ if (conn) {
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+ hci_dev_unlock(hdev);
}
static inline void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb)
conn->type = SCO_LINK;
}
- if (conn->out && ev->status == 0x1c && conn->attempt < 2) {
- conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
- (hdev->esco_type & EDR_ESCO_MASK);
- hci_setup_sync(conn, conn->link->handle);
- goto unlock;
- }
-
- if (!ev->status) {
+ switch (ev->status) {
+ case 0x00:
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
hci_conn_add_sysfs(conn);
- } else
+ break;
+
+ case 0x1c: /* SCO interval rejected */
+ case 0x1f: /* Unspecified error */
+ if (conn->out && conn->attempt < 2) {
+ conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
+ (hdev->esco_type & EDR_ESCO_MASK);
+ hci_setup_sync(conn, conn->link->handle);
+ goto unlock;
+ }
+ /* fall through */
+
+ default:
conn->state = BT_CLOSED;
+ break;
+ }
hci_proto_connect_cfm(conn, ev->status);
if (ev->status)
struct class *bt_class = NULL;
EXPORT_SYMBOL_GPL(bt_class);
-static struct workqueue_struct *btaddconn;
-static struct workqueue_struct *btdelconn;
+static struct workqueue_struct *bt_workq;
static inline char *link_typetostr(int type)
{
static void add_conn(struct work_struct *work)
{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
- flush_workqueue(btdelconn);
+ /* ensure previous del is complete */
+ flush_work(&conn->work_del);
if (device_add(&conn->dev) < 0) {
BT_ERR("Failed to register connection device");
}
}
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
- struct hci_dev *hdev = conn->hdev;
-
- BT_DBG("conn %p", conn);
-
- conn->dev.type = &bt_link;
- conn->dev.class = bt_class;
- conn->dev.parent = &hdev->dev;
-
- dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
-
- dev_set_drvdata(&conn->dev, conn);
-
- device_initialize(&conn->dev);
-
- INIT_WORK(&conn->work, add_conn);
-
- queue_work(btaddconn, &conn->work);
-}
-
/*
* The rfcomm tty device will possibly retain even when conn
* is down, and sysfs doesn't support move zombie device,
static void del_conn(struct work_struct *work)
{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
struct hci_dev *hdev = conn->hdev;
+ /* ensure previous add is complete */
+ flush_work(&conn->work_add);
+
+ if (!device_is_registered(&conn->dev))
+ return;
+
while (1) {
struct device *dev;
hci_dev_put(hdev);
}
-void hci_conn_del_sysfs(struct hci_conn *conn)
+void hci_conn_init_sysfs(struct hci_conn *conn)
{
+ struct hci_dev *hdev = conn->hdev;
+
BT_DBG("conn %p", conn);
- if (!device_is_registered(&conn->dev))
- return;
+ conn->dev.type = &bt_link;
+ conn->dev.class = bt_class;
+ conn->dev.parent = &hdev->dev;
+
+ dev_set_drvdata(&conn->dev, conn);
+
+ device_initialize(&conn->dev);
+
+ INIT_WORK(&conn->work_add, add_conn);
+ INIT_WORK(&conn->work_del, del_conn);
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+ struct hci_dev *hdev = conn->hdev;
+
+ BT_DBG("conn %p", conn);
- INIT_WORK(&conn->work, del_conn);
+ dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
- queue_work(btdelconn, &conn->work);
+ queue_work(bt_workq, &conn->work_add);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ queue_work(bt_workq, &conn->work_del);
}
static inline char *host_typetostr(int type)
int __init bt_sysfs_init(void)
{
- btaddconn = create_singlethread_workqueue("btaddconn");
- if (!btaddconn)
+ bt_workq = create_singlethread_workqueue("bluetooth");
+ if (!bt_workq)
return -ENOMEM;
- btdelconn = create_singlethread_workqueue("btdelconn");
- if (!btdelconn) {
- destroy_workqueue(btaddconn);
- return -ENOMEM;
- }
-
bt_class = class_create(THIS_MODULE, "bluetooth");
if (IS_ERR(bt_class)) {
- destroy_workqueue(btdelconn);
- destroy_workqueue(btaddconn);
+ destroy_workqueue(bt_workq);
return PTR_ERR(bt_class);
}
void bt_sysfs_cleanup(void)
{
- destroy_workqueue(btaddconn);
- destroy_workqueue(btdelconn);
+ destroy_workqueue(bt_workq);
class_destroy(bt_class);
}
rfcomm_send_ua(d->session, d->dlci);
+ rfcomm_dlc_clear_timer(d);
+
rfcomm_dlc_lock(d);
d->state = BT_CONNECTED;
d->state_change(d, 0);
return NF_STOLEN;
}
+#if defined(CONFIG_NF_CONNTRACK_IPV4) || defined(CONFIG_NF_CONNTRACK_IPV4_MODULE)
static int br_nf_dev_queue_xmit(struct sk_buff *skb)
{
- if (skb->protocol == htons(ETH_P_IP) &&
+ if (skb->nfct != NULL &&
+ (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb)) &&
skb->len > skb->dev->mtu &&
!skb_is_gso(skb))
return ip_fragment(skb, br_dev_queue_push_xmit);
else
return br_dev_queue_push_xmit(skb);
}
+#else
+static int br_nf_dev_queue_xmit(struct sk_buff *skb)
+{
+ return br_dev_queue_push_xmit(skb);
+}
+#endif
/* PF_BRIDGE/POST_ROUTING ********************************************/
static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb,
rcu_read_unlock();
- /* free the skbuff allocated by the netdevice driver */
- kfree_skb(skb);
+ /* consume the skbuff allocated by the netdevice driver */
+ consume_skb(skb);
if (matches > 0) {
can_stats.matches++;
return sk->sk_type == SOCK_SEQPACKET || sk->sk_type == SOCK_STREAM;
}
+static int receiver_wake_function(wait_queue_t *wait, unsigned mode, int sync,
+ void *key)
+{
+ unsigned long bits = (unsigned long)key;
+
+ /*
+ * Avoid a wakeup if event not interesting for us
+ */
+ if (bits && !(bits & (POLLIN | POLLERR)))
+ return 0;
+ return autoremove_wake_function(wait, mode, sync, key);
+}
/*
* Wait for a packet..
*/
static int wait_for_packet(struct sock *sk, int *err, long *timeo_p)
{
int error;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, receiver_wake_function);
prepare_to_wait_exclusive(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE);
{
struct packet_type *ptype;
+#ifdef CONFIG_NET_CLS_ACT
+ if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS)))
+ net_timestamp(skb);
+#else
net_timestamp(skb);
+#endif
rcu_read_lock();
list_for_each_entry_rcu(ptype, &ptype_all, list) {
{
u32 hash;
- if (skb_rx_queue_recorded(skb)) {
- hash = skb_get_rx_queue(skb);
- } else if (skb->sk && skb->sk->sk_hash) {
+ if (skb_rx_queue_recorded(skb))
+ return skb_get_rx_queue(skb) % dev->real_num_tx_queues;
+
+ if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
- } else
+ else
hash = skb->protocol;
hash = jhash_1word(hash, skb_tx_hashrnd);
}
BUG_ON(info->nr_frags > MAX_SKB_FRAGS);
- frag = &info->frags[info->nr_frags - 1];
+ frag = info->frags;
- for (i = skb_shinfo(skb)->nr_frags; i < info->nr_frags; i++) {
+ for (i = 0; i < info->nr_frags; i++) {
skb_fill_page_desc(skb, i, frag->page, frag->page_offset,
frag->size);
frag++;
dev->iflink = -1;
#ifdef CONFIG_COMPAT_NET_DEV_OPS
- /* Netdevice_ops API compatiability support.
+ /* Netdevice_ops API compatibility support.
* This is temporary until all network devices are converted.
*/
if (dev->netdev_ops) {
dev->name, netdev_drivername(dev, drivername, 64));
/* This works only because net_device_ops and the
- compatiablity structure are the same. */
+ compatibility structure are the same. */
dev->netdev_ops = (void *) &(dev->init);
}
#endif
#include <linux/bitops.h>
#include <net/genetlink.h>
-#include <trace/skb.h>
+#include <trace/events/skb.h>
#include <asm/unaligned.h>
#include <linux/workqueue.h>
#include <linux/netlink.h>
#include <linux/net_dropmon.h>
-#include <trace/skb.h>
#include <asm/unaligned.h>
#include <asm/bitops.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/skb.h>
-DEFINE_TRACE(kfree_skb);
EXPORT_TRACEPOINT_SYMBOL_GPL(kfree_skb);
#include <asm/uaccess.h>
#include <asm/system.h>
-#include <trace/skb.h>
+#include <trace/events/skb.h>
#include "kmap_skb.h"
static inline struct page *linear_to_page(struct page *page, unsigned int *len,
unsigned int *offset,
- struct sk_buff *skb)
+ struct sk_buff *skb, struct sock *sk)
{
- struct sock *sk = skb->sk;
struct page *p = sk->sk_sndmsg_page;
unsigned int off;
*/
static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
unsigned int *len, unsigned int offset,
- struct sk_buff *skb, int linear)
+ struct sk_buff *skb, int linear,
+ struct sock *sk)
{
if (unlikely(spd->nr_pages == PIPE_BUFFERS))
return 1;
if (linear) {
- page = linear_to_page(page, len, &offset, skb);
+ page = linear_to_page(page, len, &offset, skb, sk);
if (!page)
return 1;
} else
static inline int __splice_segment(struct page *page, unsigned int poff,
unsigned int plen, unsigned int *off,
unsigned int *len, struct sk_buff *skb,
- struct splice_pipe_desc *spd, int linear)
+ struct splice_pipe_desc *spd, int linear,
+ struct sock *sk)
{
if (!*len)
return 1;
/* the linear region may spread across several pages */
flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
- if (spd_fill_page(spd, page, &flen, poff, skb, linear))
+ if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk))
return 1;
__segment_seek(&page, &poff, &plen, flen);
* pipe is full or if we already spliced the requested length.
*/
static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
- unsigned int *len,
- struct splice_pipe_desc *spd)
+ unsigned int *len, struct splice_pipe_desc *spd,
+ struct sock *sk)
{
int seg;
if (__splice_segment(virt_to_page(skb->data),
(unsigned long) skb->data & (PAGE_SIZE - 1),
skb_headlen(skb),
- offset, len, skb, spd, 1))
+ offset, len, skb, spd, 1, sk))
return 1;
/*
const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
if (__splice_segment(f->page, f->page_offset, f->size,
- offset, len, skb, spd, 0))
+ offset, len, skb, spd, 0, sk))
return 1;
}
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
};
+ struct sock *sk = skb->sk;
/*
* __skb_splice_bits() only fails if the output has no room left,
* so no point in going over the frag_list for the error case.
*/
- if (__skb_splice_bits(skb, &offset, &tlen, &spd))
+ if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk))
goto done;
else if (!tlen)
goto done;
struct sk_buff *list = skb_shinfo(skb)->frag_list;
for (; list && tlen; list = list->next) {
- if (__skb_splice_bits(list, &offset, &tlen, &spd))
+ if (__skb_splice_bits(list, &offset, &tlen, &spd, sk))
break;
}
}
done:
if (spd.nr_pages) {
- struct sock *sk = skb->sk;
int ret;
/*
indev = in ? in->name : nulldevname;
outdev = out ? out->name : nulldevname;
- rcu_read_lock_bh();
- private = rcu_dereference(table->private);
- table_base = rcu_dereference(private->entries[smp_processor_id()]);
+ xt_info_rdlock_bh();
+ private = table->private;
+ table_base = private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
back = get_entry(table_base, private->underflow[hook]);
hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) +
(2 * skb->dev->addr_len);
+
ADD_COUNTER(e->counters, hdr_len, 1);
t = arpt_get_target(e);
e = (void *)e + e->next_offset;
}
} while (!hotdrop);
-
- rcu_read_unlock_bh();
+ xt_info_rdunlock_bh();
if (hotdrop)
return NF_DROP;
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU
- * We dont care about preemption here.
+ *
+ * Bottom half has to be disabled to prevent deadlock
+ * if new softirq were to run and call ipt_do_table
*/
- curcpu = raw_smp_processor_id();
+ local_bh_disable();
+ curcpu = smp_processor_id();
i = 0;
ARPT_ENTRY_ITERATE(t->entries[curcpu],
if (cpu == curcpu)
continue;
i = 0;
+ xt_info_wrlock(cpu);
ARPT_ENTRY_ITERATE(t->entries[cpu],
t->size,
add_entry_to_counter,
counters,
&i);
+ xt_info_wrunlock(cpu);
}
-}
-
-
-/* We're lazy, and add to the first CPU; overflow works its fey magic
- * and everything is OK. */
-static int
-add_counter_to_entry(struct arpt_entry *e,
- const struct xt_counters addme[],
- unsigned int *i)
-{
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
- (*i)++;
- return 0;
-}
-
-/* Take values from counters and add them back onto the current cpu */
-static void put_counters(struct xt_table_info *t,
- const struct xt_counters counters[])
-{
- unsigned int i, cpu;
-
- local_bh_disable();
- cpu = smp_processor_id();
- i = 0;
- ARPT_ENTRY_ITERATE(t->entries[cpu],
- t->size,
- add_counter_to_entry,
- counters,
- &i);
local_bh_enable();
}
-static inline int
-zero_entry_counter(struct arpt_entry *e, void *arg)
-{
- e->counters.bcnt = 0;
- e->counters.pcnt = 0;
- return 0;
-}
-
-static void
-clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info)
-{
- unsigned int cpu;
- const void *loc_cpu_entry = info->entries[raw_smp_processor_id()];
-
- memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
- for_each_possible_cpu(cpu) {
- memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size);
- ARPT_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size,
- zero_entry_counter, NULL);
- }
-}
-
static struct xt_counters *alloc_counters(struct xt_table *table)
{
unsigned int countersize;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
- struct xt_table_info *info;
/* We need atomic snapshot of counters: rest doesn't change
* (other than comefrom, which userspace doesn't care
counters = vmalloc_node(countersize, numa_node_id());
if (counters == NULL)
- goto nomem;
-
- info = xt_alloc_table_info(private->size);
- if (!info)
- goto free_counters;
-
- clone_counters(info, private);
-
- mutex_lock(&table->lock);
- xt_table_entry_swap_rcu(private, info);
- synchronize_net(); /* Wait until smoke has cleared */
+ return ERR_PTR(-ENOMEM);
- get_counters(info, counters);
- put_counters(private, counters);
- mutex_unlock(&table->lock);
-
- xt_free_table_info(info);
+ get_counters(private, counters);
return counters;
-
- free_counters:
- vfree(counters);
- nomem:
- return ERR_PTR(-ENOMEM);
}
static int copy_entries_to_user(unsigned int total_size,
(newinfo->number <= oldinfo->initial_entries))
module_put(t->me);
- /* Get the old counters. */
+ /* Get the old counters, and synchronize with replace */
get_counters(oldinfo, counters);
+
/* Decrease module usage counts and free resource */
loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()];
ARPT_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry,
return ret;
}
+/* We're lazy, and add to the first CPU; overflow works its fey magic
+ * and everything is OK. */
+static int
+add_counter_to_entry(struct arpt_entry *e,
+ const struct xt_counters addme[],
+ unsigned int *i)
+{
+ ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
+
+ (*i)++;
+ return 0;
+}
+
static int do_add_counters(struct net *net, void __user *user, unsigned int len,
int compat)
{
- unsigned int i;
+ unsigned int i, curcpu;
struct xt_counters_info tmp;
struct xt_counters *paddc;
unsigned int num_counters;
goto free;
}
- mutex_lock(&t->lock);
+ local_bh_disable();
private = t->private;
if (private->number != num_counters) {
ret = -EINVAL;
goto unlock_up_free;
}
- preempt_disable();
i = 0;
/* Choose the copy that is on our node */
- loc_cpu_entry = private->entries[smp_processor_id()];
+ curcpu = smp_processor_id();
+ loc_cpu_entry = private->entries[curcpu];
+ xt_info_wrlock(curcpu);
ARPT_ENTRY_ITERATE(loc_cpu_entry,
private->size,
add_counter_to_entry,
paddc,
&i);
- preempt_enable();
+ xt_info_wrunlock(curcpu);
unlock_up_free:
- mutex_unlock(&t->lock);
-
+ local_bh_enable();
xt_table_unlock(t);
module_put(t->me);
free:
tgpar.hooknum = hook;
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-
- rcu_read_lock_bh();
- private = rcu_dereference(table->private);
- table_base = rcu_dereference(private->entries[smp_processor_id()]);
+ xt_info_rdlock_bh();
+ private = table->private;
+ table_base = private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
e = (void *)e + e->next_offset;
}
} while (!hotdrop);
-
- rcu_read_unlock_bh();
+ xt_info_rdunlock_bh();
#ifdef DEBUG_ALLOW_ALL
return NF_ACCEPT;
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
- * with data used by 'current' CPU
- * We dont care about preemption here.
+ * with data used by 'current' CPU.
+ *
+ * Bottom half has to be disabled to prevent deadlock
+ * if new softirq were to run and call ipt_do_table
*/
- curcpu = raw_smp_processor_id();
+ local_bh_disable();
+ curcpu = smp_processor_id();
i = 0;
IPT_ENTRY_ITERATE(t->entries[curcpu],
if (cpu == curcpu)
continue;
i = 0;
+ xt_info_wrlock(cpu);
IPT_ENTRY_ITERATE(t->entries[cpu],
t->size,
add_entry_to_counter,
counters,
&i);
+ xt_info_wrunlock(cpu);
}
-
-}
-
-/* We're lazy, and add to the first CPU; overflow works its fey magic
- * and everything is OK. */
-static int
-add_counter_to_entry(struct ipt_entry *e,
- const struct xt_counters addme[],
- unsigned int *i)
-{
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
- (*i)++;
- return 0;
-}
-
-/* Take values from counters and add them back onto the current cpu */
-static void put_counters(struct xt_table_info *t,
- const struct xt_counters counters[])
-{
- unsigned int i, cpu;
-
- local_bh_disable();
- cpu = smp_processor_id();
- i = 0;
- IPT_ENTRY_ITERATE(t->entries[cpu],
- t->size,
- add_counter_to_entry,
- counters,
- &i);
local_bh_enable();
}
-
-static inline int
-zero_entry_counter(struct ipt_entry *e, void *arg)
-{
- e->counters.bcnt = 0;
- e->counters.pcnt = 0;
- return 0;
-}
-
-static void
-clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info)
-{
- unsigned int cpu;
- const void *loc_cpu_entry = info->entries[raw_smp_processor_id()];
-
- memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
- for_each_possible_cpu(cpu) {
- memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size);
- IPT_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size,
- zero_entry_counter, NULL);
- }
-}
-
static struct xt_counters * alloc_counters(struct xt_table *table)
{
unsigned int countersize;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
- struct xt_table_info *info;
/* We need atomic snapshot of counters: rest doesn't change
(other than comefrom, which userspace doesn't care
counters = vmalloc_node(countersize, numa_node_id());
if (counters == NULL)
- goto nomem;
+ return ERR_PTR(-ENOMEM);
- info = xt_alloc_table_info(private->size);
- if (!info)
- goto free_counters;
-
- clone_counters(info, private);
-
- mutex_lock(&table->lock);
- xt_table_entry_swap_rcu(private, info);
- synchronize_net(); /* Wait until smoke has cleared */
-
- get_counters(info, counters);
- put_counters(private, counters);
- mutex_unlock(&table->lock);
-
- xt_free_table_info(info);
+ get_counters(private, counters);
return counters;
-
- free_counters:
- vfree(counters);
- nomem:
- return ERR_PTR(-ENOMEM);
}
static int
(newinfo->number <= oldinfo->initial_entries))
module_put(t->me);
- /* Get the old counters. */
+ /* Get the old counters, and synchronize with replace */
get_counters(oldinfo, counters);
+
/* Decrease module usage counts and free resource */
loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()];
IPT_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry,
return ret;
}
+/* We're lazy, and add to the first CPU; overflow works its fey magic
+ * and everything is OK. */
+static int
+add_counter_to_entry(struct ipt_entry *e,
+ const struct xt_counters addme[],
+ unsigned int *i)
+{
+ ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
+
+ (*i)++;
+ return 0;
+}
static int
do_add_counters(struct net *net, void __user *user, unsigned int len, int compat)
{
- unsigned int i;
+ unsigned int i, curcpu;
struct xt_counters_info tmp;
struct xt_counters *paddc;
unsigned int num_counters;
goto free;
}
- mutex_lock(&t->lock);
+ local_bh_disable();
private = t->private;
if (private->number != num_counters) {
ret = -EINVAL;
goto unlock_up_free;
}
- preempt_disable();
i = 0;
/* Choose the copy that is on our node */
- loc_cpu_entry = private->entries[raw_smp_processor_id()];
+ curcpu = smp_processor_id();
+ loc_cpu_entry = private->entries[curcpu];
+ xt_info_wrlock(curcpu);
IPT_ENTRY_ITERATE(loc_cpu_entry,
private->size,
add_counter_to_entry,
paddc,
&i);
- preempt_enable();
+ xt_info_wrunlock(curcpu);
unlock_up_free:
- mutex_unlock(&t->lock);
+ local_bh_enable();
xt_table_unlock(t);
module_put(t->me);
free:
minip = ntohl(range->min_ip);
maxip = ntohl(range->max_ip);
j = jhash_2words((__force u32)tuple->src.u3.ip,
- (__force u32)tuple->dst.u3.ip, 0);
+ range->flags & IP_NAT_RANGE_PERSISTENT ?
+ (__force u32)tuple->dst.u3.ip : 0, 0);
j = ((u64)j * (maxip - minip + 1)) >> 32;
*var_ipp = htonl(minip + j);
}
0,
&rt_hash_log,
&rt_hash_mask,
- 0);
+ rhash_entries ? 0 : 512 * 1024);
memset(rt_hash_table, 0, (rt_hash_mask + 1) * sizeof(struct rt_hash_bucket));
rt_hash_lock_init();
struct sk_buff *p;
struct tcphdr *th;
struct tcphdr *th2;
+ unsigned int len;
unsigned int thlen;
unsigned int flags;
unsigned int mss = 1;
skb_gro_pull(skb, thlen);
+ len = skb_gro_len(skb);
flags = tcp_flag_word(th);
for (; (p = *head); head = &p->next) {
mss = skb_shinfo(p)->gso_size;
- flush |= (skb_gro_len(skb) > mss) | !skb_gro_len(skb);
+ flush |= (len > mss) | !len;
flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq);
if (flush || skb_gro_receive(head, skb)) {
tcp_flag_word(th2) |= flags & (TCP_FLAG_FIN | TCP_FLAG_PSH);
out_check_final:
- flush = skb_gro_len(skb) < mss;
+ flush = len < mss;
flush |= flags & (TCP_FLAG_URG | TCP_FLAG_PSH | TCP_FLAG_RST |
TCP_FLAG_SYN | TCP_FLAG_FIN);
tcp_grow_window(sk, skb);
}
-static u32 tcp_rto_min(struct sock *sk)
-{
- struct dst_entry *dst = __sk_dst_get(sk);
- u32 rto_min = TCP_RTO_MIN;
-
- if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
- rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
- return rto_min;
-}
-
/* Called to compute a smoothed rtt estimate. The data fed to this
* routine either comes from timestamps, or from segments that were
* known _not_ to have been retransmitted [see Karn/Partridge
if (tp->lost_skb_hint &&
before(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(tp->lost_skb_hint)->seq) &&
- (tcp_is_fack(tp) || TCP_SKB_CB(skb)->sacked))
+ (tcp_is_fack(tp) || (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED)))
tp->lost_cnt_hint -= decr;
tcp_verify_left_out(tp);
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
- rcu_read_lock_bh();
- private = rcu_dereference(table->private);
- table_base = rcu_dereference(private->entries[smp_processor_id()]);
+ xt_info_rdlock_bh();
+ private = table->private;
+ table_base = private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
#ifdef CONFIG_NETFILTER_DEBUG
((struct ip6t_entry *)table_base)->comefrom = NETFILTER_LINK_POISON;
#endif
- rcu_read_unlock_bh();
+ xt_info_rdunlock_bh();
#ifdef DEBUG_ALLOW_ALL
return NF_ACCEPT;
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU
- * We dont care about preemption here.
+ *
+ * Bottom half has to be disabled to prevent deadlock
+ * if new softirq were to run and call ipt_do_table
*/
- curcpu = raw_smp_processor_id();
+ local_bh_disable();
+ curcpu = smp_processor_id();
i = 0;
IP6T_ENTRY_ITERATE(t->entries[curcpu],
if (cpu == curcpu)
continue;
i = 0;
+ xt_info_wrlock(cpu);
IP6T_ENTRY_ITERATE(t->entries[cpu],
t->size,
add_entry_to_counter,
counters,
&i);
+ xt_info_wrunlock(cpu);
}
-}
-
-/* We're lazy, and add to the first CPU; overflow works its fey magic
- * and everything is OK. */
-static int
-add_counter_to_entry(struct ip6t_entry *e,
- const struct xt_counters addme[],
- unsigned int *i)
-{
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
- (*i)++;
- return 0;
-}
-
-/* Take values from counters and add them back onto the current cpu */
-static void put_counters(struct xt_table_info *t,
- const struct xt_counters counters[])
-{
- unsigned int i, cpu;
-
- local_bh_disable();
- cpu = smp_processor_id();
- i = 0;
- IP6T_ENTRY_ITERATE(t->entries[cpu],
- t->size,
- add_counter_to_entry,
- counters,
- &i);
local_bh_enable();
}
-static inline int
-zero_entry_counter(struct ip6t_entry *e, void *arg)
-{
- e->counters.bcnt = 0;
- e->counters.pcnt = 0;
- return 0;
-}
-
-static void
-clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info)
-{
- unsigned int cpu;
- const void *loc_cpu_entry = info->entries[raw_smp_processor_id()];
-
- memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
- for_each_possible_cpu(cpu) {
- memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size);
- IP6T_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size,
- zero_entry_counter, NULL);
- }
-}
-
static struct xt_counters *alloc_counters(struct xt_table *table)
{
unsigned int countersize;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
- struct xt_table_info *info;
/* We need atomic snapshot of counters: rest doesn't change
(other than comefrom, which userspace doesn't care
counters = vmalloc_node(countersize, numa_node_id());
if (counters == NULL)
- goto nomem;
+ return ERR_PTR(-ENOMEM);
- info = xt_alloc_table_info(private->size);
- if (!info)
- goto free_counters;
-
- clone_counters(info, private);
-
- mutex_lock(&table->lock);
- xt_table_entry_swap_rcu(private, info);
- synchronize_net(); /* Wait until smoke has cleared */
-
- get_counters(info, counters);
- put_counters(private, counters);
- mutex_unlock(&table->lock);
-
- xt_free_table_info(info);
+ get_counters(private, counters);
return counters;
-
- free_counters:
- vfree(counters);
- nomem:
- return ERR_PTR(-ENOMEM);
}
static int
(newinfo->number <= oldinfo->initial_entries))
module_put(t->me);
- /* Get the old counters. */
+ /* Get the old counters, and synchronize with replace */
get_counters(oldinfo, counters);
+
/* Decrease module usage counts and free resource */
loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()];
IP6T_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry,
return ret;
}
+/* We're lazy, and add to the first CPU; overflow works its fey magic
+ * and everything is OK. */
+static int
+add_counter_to_entry(struct ip6t_entry *e,
+ const struct xt_counters addme[],
+ unsigned int *i)
+{
+ ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
+
+ (*i)++;
+ return 0;
+}
+
static int
do_add_counters(struct net *net, void __user *user, unsigned int len,
int compat)
{
- unsigned int i;
+ unsigned int i, curcpu;
struct xt_counters_info tmp;
struct xt_counters *paddc;
unsigned int num_counters;
goto free;
}
- mutex_lock(&t->lock);
+
+ local_bh_disable();
private = t->private;
if (private->number != num_counters) {
ret = -EINVAL;
goto unlock_up_free;
}
- preempt_disable();
i = 0;
/* Choose the copy that is on our node */
- loc_cpu_entry = private->entries[raw_smp_processor_id()];
+ curcpu = smp_processor_id();
+ xt_info_wrlock(curcpu);
+ loc_cpu_entry = private->entries[curcpu];
IP6T_ENTRY_ITERATE(loc_cpu_entry,
private->size,
add_counter_to_entry,
paddc,
&i);
- preempt_enable();
+ xt_info_wrunlock(curcpu);
+
unlock_up_free:
- mutex_unlock(&t->lock);
+ local_bh_enable();
xt_table_unlock(t);
module_put(t->me);
free:
err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo);
}
+ case IUCV_CLOSING: /* fall through */
sk->sk_state = IUCV_CLOSED;
sk->sk_state_change(sk);
spin_lock_init(&iucv_sk(sk)->message_q.lock);
skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q);
iucv_sk(sk)->send_tag = 0;
+ iucv_sk(sk)->path = NULL;
+ memset(&iucv_sk(sk)->src_user_id , 0, 32);
sk->sk_destruct = iucv_sock_destruct;
sk->sk_sndtimeo = IUCV_CONN_TIMEOUT;
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
+ /* receive/dequeue next skb:
+ * the function understands MSG_PEEK and, thus, does not dequeue skb */
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb) {
if (sk->sk_shutdown & RCV_SHUTDOWN)
iucv_process_message_q(sk);
spin_unlock_bh(&iucv->message_q.lock);
}
-
- } else
- skb_queue_head(&sk->sk_receive_queue, skb);
+ }
done:
return err ? : copied;
lock_sock(sk);
switch (sk->sk_state) {
+ case IUCV_DISCONN:
+ case IUCV_CLOSING:
+ case IUCV_SEVERED:
case IUCV_CLOSED:
err = -ENOTCONN;
goto fail;
struct sock_msg_q *save_msg;
int len;
- if (sk->sk_shutdown & RCV_SHUTDOWN)
+ if (sk->sk_shutdown & RCV_SHUTDOWN) {
+ iucv_message_reject(path, msg);
return;
+ }
+
+ spin_lock(&iucv->message_q.lock);
if (!list_empty(&iucv->message_q.list) ||
!skb_queue_empty(&iucv->backlog_skb_q))
if (!skb)
goto save_message;
- spin_lock(&iucv->message_q.lock);
iucv_process_message(sk, skb, path, msg);
- spin_unlock(&iucv->message_q.lock);
+ goto out_unlock;
return;
save_msg->path = path;
save_msg->msg = *msg;
- spin_lock(&iucv->message_q.lock);
list_add_tail(&save_msg->list, &iucv->message_q.list);
+
+out_unlock:
spin_unlock(&iucv->message_q.lock);
}
and show them in debugfs.
If unsure, say N.
-
-config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
- bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
- depends on MAC80211_DEBUG_MENU
- ---help---
- Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
- debug messages.
(chan->max_power - local->power_constr_level) :
chan->max_power;
- if (local->user_power_level)
+ if (local->user_power_level >= 0)
power = min(power, local->user_power_level);
if (local->hw.conf.power_level != power) {
local->hw.conf.long_frame_max_tx_count = 4;
local->hw.conf.short_frame_max_tx_count = 7;
local->hw.conf.radio_enabled = true;
+ local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
if (result < 0)
goto fail_sta_info;
+ result = ieee80211_wep_init(local);
+ if (result < 0) {
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
+ goto fail_wep;
+ }
+
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
goto fail_rate;
}
- result = ieee80211_wep_init(local);
-
- if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
- wiphy_name(local->hw.wiphy), result);
- goto fail_wep;
- }
-
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
result = ieee80211_if_add(local, "wlan%d", NULL,
return 0;
-fail_wep:
- rate_control_deinitialize(local);
fail_rate:
unregister_netdevice(local->mdev);
local->mdev = NULL;
fail_dev:
rtnl_unlock();
+ ieee80211_wep_free(local);
+fail_wep:
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
u8 index, indexn1, indexn2;
struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim;
+ if (unlikely(!tim || elems->tim_len < 4))
+ return false;
+
aid &= 0x3fff;
index = aid / 8;
mask = 1 << (aid & 7);
u.mgd.beacon_loss_work);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
- "- sending probe request\n", sdata->dev->name,
- sdata->u.mgd.bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
+ "- sending probe request\n", sdata->dev->name,
+ sdata->u.mgd.bssid);
+ }
+#endif
ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
(local->hw.conf.flags & IEEE80211_CONF_PS)) &&
time_after(jiffies,
ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) {
- printk(KERN_DEBUG "%s: beacon loss from AP %pM "
- "- sending probe request\n",
- sdata->dev->name, ifmgd->bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: beacon loss from AP %pM "
+ "- sending probe request\n",
+ sdata->dev->name, ifmgd->bssid);
+ }
+#endif
ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
ifmgd->ssid_len, NULL, 0);
for (i = 0; i < elems.ext_supp_rates_len; i++) {
int rate = (elems.ext_supp_rates[i] & 0x7f) * 5;
- bool is_basic = !!(elems.supp_rates[i] & 0x80);
+ bool is_basic = !!(elems.ext_supp_rates[i] & 0x80);
if (rate > 110)
have_higher_than_11mbit = true;
static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
{
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ /*
+ * Need to update last_beacon to avoid beacon loss
+ * test to trigger.
+ */
+ sdata->u.mgd.last_beacon = jiffies;
+
+
queue_work(sdata->local->hw.workqueue,
&sdata->u.mgd.work);
+ }
}
/* interface setup */
struct ieee80211_local *local =
container_of(work, struct ieee80211_local,
dynamic_ps_enable_work);
+ /* XXX: using scan_sdata is completely broken! */
struct ieee80211_sub_if_data *sdata = local->scan_sdata;
if (local->hw.conf.flags & IEEE80211_CONF_PS)
return;
- if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+ if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
ieee80211_send_nullfunc(local, sdata, 1);
local->hw.conf.flags |= IEEE80211_CONF_PS;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
- WARN_ON(ieee80211_if_config(sdata, changed));
- ieee80211_bss_info_change_notify(sdata, ~0);
+ /*
+ * Driver's config_interface can fail if rfkill is
+ * enabled. Accommodate this return code.
+ * FIXME: When mac80211 has knowledge of rfkill
+ * state the code below can change back to:
+ * WARN(ieee80211_if_config(sdata, changed));
+ * ieee80211_bss_info_change_notify(sdata, ~0);
+ */
+ if (ieee80211_if_config(sdata, changed))
+ printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
+ sdata->dev->name);
+ else
+ ieee80211_bss_info_change_notify(sdata, ~0);
break;
case NL80211_IFTYPE_WDS:
break;
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
+ struct ieee80211_rx_status *status,
u16 mpdu_seq_num,
int bar_req);
/*
* mac80211. That also explains the __skb_push()
* below.
*/
- align = (unsigned long)skb->data & 4;
+ align = (unsigned long)skb->data & 3;
if (align) {
if (WARN_ON(skb_headroom(skb) < 3)) {
dev_kfree_skb(skb);
/* manage reordering buffer according to requested */
/* sequence number */
rcu_read_lock();
- ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL,
+ ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL,
start_seq_num, 1);
rcu_read_unlock();
return RX_DROP_UNUSABLE;
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
+ struct ieee80211_rx_status *rxstatus,
u16 mpdu_seq_num,
int bar_req)
{
/* put the frame in the reordering buffer */
tid_agg_rx->reorder_buf[index] = skb;
+ memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
+ sizeof(*rxstatus));
tid_agg_rx->stored_mpdu_num++;
/* release the buffer until next missing frame */
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
}
static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
- struct sk_buff *skb)
+ struct sk_buff *skb,
+ struct ieee80211_rx_status *status)
{
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
/* according to mpdu sequence number deal with reordering buffer */
mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
- ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb,
+ ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status,
mpdu_seq_num, 0);
end_reorder:
return ret;
return;
}
- if (!ieee80211_rx_reorder_ampdu(local, skb))
+ if (!ieee80211_rx_reorder_ampdu(local, skb, status))
__ieee80211_rx_handle_packet(hw, skb, status, rate);
rcu_read_unlock();
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_channel* chan = local->hw.conf.channel;
+ bool reconf = false;
u32 reconf_flags = 0;
int new_power_level;
if (!chan)
return -EINVAL;
- if (data->txpower.fixed)
- new_power_level = min(data->txpower.value, chan->max_power);
- else /* Automatic power level setting */
- new_power_level = chan->max_power;
+ /* only change when not disabling */
+ if (!data->txpower.disabled) {
+ if (data->txpower.fixed) {
+ if (data->txpower.value < 0)
+ return -EINVAL;
+ new_power_level = data->txpower.value;
+ /*
+ * Debatable, but we cannot do a fixed power
+ * level above the regulatory constraint.
+ * Use "iwconfig wlan0 txpower 15dBm" instead.
+ */
+ if (new_power_level > chan->max_power)
+ return -EINVAL;
+ } else {
+ /*
+ * Automatic power level setting, max being the value
+ * passed in from userland.
+ */
+ if (data->txpower.value < 0)
+ new_power_level = -1;
+ else
+ new_power_level = data->txpower.value;
+ }
+
+ reconf = true;
- local->user_power_level = new_power_level;
- if (local->hw.conf.power_level != new_power_level)
- reconf_flags |= IEEE80211_CONF_CHANGE_POWER;
+ /*
+ * ieee80211_hw_config() will limit to the channel's
+ * max power and possibly power constraint from AP.
+ */
+ local->user_power_level = new_power_level;
+ }
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
- if (reconf_flags)
+ if (reconf || reconf_flags)
ieee80211_hw_config(local, reconf_flags);
return 0;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
frag->value = local->fragmentation_threshold;
- frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD);
+ frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD);
frag->fixed = 1;
return 0;
help
This option enables support for a netlink-based userspace interface
+endif # NF_CONNTRACK
+
# transparent proxy support
config NETFILTER_TPROXY
tristate "Transparent proxying support (EXPERIMENTAL)"
To compile it as a module, choose M here. If unsure, say N.
-endif # NF_CONNTRACK
-
config NETFILTER_XTABLES
tristate "Netfilter Xtables support (required for ip_tables)"
default m if NETFILTER_ADVANCED=n
depends on NETFILTER_TPROXY
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
+ depends on !NF_CONNTRACK || NF_CONNTRACK
select NF_DEFRAG_IPV4
help
This option adds a `socket' match, which can be used to match
}
/* Get rid of expecteds, set helpers to NULL. */
- hlist_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
+ hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
unhelp(h, me);
for (i = 0; i < nf_conntrack_htable_size; i++) {
hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode)
skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC);
if (!skb)
- return NOTIFY_DONE;
+ goto errout;
b = skb->tail;
nla_put_failure:
rcu_read_unlock();
nlmsg_failure:
- nfnetlink_set_err(0, group, -ENOBUFS);
kfree_skb(skb);
+errout:
+ nfnetlink_set_err(0, group, -ENOBUFS);
return NOTIFY_DONE;
}
#endif /* CONFIG_NF_CONNTRACK_EVENTS */
{
struct nf_conntrack_helper *helper;
struct nf_conn_help *help = nfct_help(ct);
- char *helpname;
+ char *helpname = NULL;
int err;
/* don't change helper of sibling connections */
rcu_read_lock();
if (cda[CTA_HELP]) {
- char *helpname;
+ char *helpname = NULL;
err = ctnetlink_parse_help(cda[CTA_HELP], &helpname);
if (err < 0)
skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!skb)
- return NOTIFY_DONE;
+ goto errout;
b = skb->tail;
nla_put_failure:
rcu_read_unlock();
nlmsg_failure:
- nfnetlink_set_err(0, 0, -ENOBUFS);
kfree_skb(skb);
+errout:
+ nfnetlink_set_err(0, 0, -ENOBUFS);
return NOTIFY_DONE;
}
#endif
if (!nest_parms)
goto nla_put_failure;
NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_STATE, ct->proto.dccp.state);
+ NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_ROLE,
+ ct->proto.dccp.role[IP_CT_DIR_ORIGINAL]);
nla_nest_end(skb, nest_parms);
read_unlock_bh(&dccp_lock);
return 0;
static const struct nla_policy dccp_nla_policy[CTA_PROTOINFO_DCCP_MAX + 1] = {
[CTA_PROTOINFO_DCCP_STATE] = { .type = NLA_U8 },
+ [CTA_PROTOINFO_DCCP_ROLE] = { .type = NLA_U8 },
};
static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
return err;
if (!tb[CTA_PROTOINFO_DCCP_STATE] ||
- nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]) >= CT_DCCP_IGNORE)
+ !tb[CTA_PROTOINFO_DCCP_ROLE] ||
+ nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) > CT_DCCP_ROLE_MAX ||
+ nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]) >= CT_DCCP_IGNORE) {
return -EINVAL;
+ }
write_lock_bh(&dccp_lock);
ct->proto.dccp.state = nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]);
+ if (nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) == CT_DCCP_ROLE_CLIENT) {
+ ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_CLIENT;
+ ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_SERVER;
+ } else {
+ ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_SERVER;
+ ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_CLIENT;
+ }
write_unlock_bh(&dccp_lock);
return 0;
}
.print_conntrack = dccp_print_conntrack,
#if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
.to_nlattr = dccp_to_nlattr,
+ .nlattr_size = dccp_nlattr_size,
.from_nlattr = nlattr_to_dccp,
.tuple_to_nlattr = nf_ct_port_tuple_to_nlattr,
.nlattr_tuple_size = nf_ct_port_nlattr_tuple_size,
.error = udplite_error,
#if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
.tuple_to_nlattr = nf_ct_port_tuple_to_nlattr,
+ .nlattr_tuple_size = nf_ct_port_nlattr_tuple_size,
.nlattr_to_tuple = nf_ct_port_nlattr_to_tuple,
.nla_policy = nf_ct_port_nla_policy,
#endif
int nf_log_register(u_int8_t pf, struct nf_logger *logger)
{
const struct nf_logger *llog;
+ int i;
if (pf >= ARRAY_SIZE(nf_loggers))
return -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(logger->list); i++)
+ INIT_LIST_HEAD(&logger->list[i]);
+
mutex_lock(&nf_log_mutex);
if (pf == NFPROTO_UNSPEC) {
nfnetlink_rcv, NULL, THIS_MODULE);
if (!nfnl) {
printk(KERN_ERR "cannot initialize nfnetlink!\n");
- return -1;
+ return -ENOMEM;
}
return 0;
}
EXPORT_SYMBOL(xt_free_table_info);
-void xt_table_entry_swap_rcu(struct xt_table_info *oldinfo,
- struct xt_table_info *newinfo)
-{
- unsigned int cpu;
-
- for_each_possible_cpu(cpu) {
- void *p = oldinfo->entries[cpu];
- rcu_assign_pointer(oldinfo->entries[cpu], newinfo->entries[cpu]);
- newinfo->entries[cpu] = p;
- }
-
-}
-EXPORT_SYMBOL_GPL(xt_table_entry_swap_rcu);
-
/* Find table by name, grabs mutex & ref. Returns ERR_PTR() on error. */
struct xt_table *xt_find_table_lock(struct net *net, u_int8_t af,
const char *name)
EXPORT_SYMBOL_GPL(xt_compat_unlock);
#endif
+DEFINE_PER_CPU(struct xt_info_lock, xt_info_locks);
+EXPORT_PER_CPU_SYMBOL_GPL(xt_info_locks);
+
+
struct xt_table_info *
xt_replace_table(struct xt_table *table,
unsigned int num_counters,
struct xt_table_info *newinfo,
int *error)
{
- struct xt_table_info *oldinfo, *private;
+ struct xt_table_info *private;
/* Do the substitution. */
- mutex_lock(&table->lock);
+ local_bh_disable();
private = table->private;
+
/* Check inside lock: is the old number correct? */
if (num_counters != private->number) {
duprintf("num_counters != table->private->number (%u/%u)\n",
num_counters, private->number);
- mutex_unlock(&table->lock);
+ local_bh_enable();
*error = -EAGAIN;
return NULL;
}
- oldinfo = private;
- rcu_assign_pointer(table->private, newinfo);
- newinfo->initial_entries = oldinfo->initial_entries;
- mutex_unlock(&table->lock);
- synchronize_net();
- return oldinfo;
+ table->private = newinfo;
+ newinfo->initial_entries = private->initial_entries;
+
+ /*
+ * Even though table entries have now been swapped, other CPU's
+ * may still be using the old entries. This is okay, because
+ * resynchronization happens because of the locking done
+ * during the get_counters() routine.
+ */
+ local_bh_enable();
+
+ return private;
}
EXPORT_SYMBOL_GPL(xt_replace_table);
/* Simplifies replace_table code. */
table->private = bootstrap;
- mutex_init(&table->lock);
if (!xt_replace_table(table, 0, newinfo, &ret))
goto unlock;
static int __init xt_init(void)
{
- int i, rv;
+ unsigned int i;
+ int rv;
+
+ for_each_possible_cpu(i) {
+ struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
+ spin_lock_init(&lock->lock);
+ lock->readers = 0;
+ }
xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
if (!xt)
struct recent_table *t = pde->data;
struct recent_entry *e;
char buf[sizeof("+255.255.255.255")], *c = buf;
- __be32 addr;
+ union nf_inet_addr addr = {};
int add;
if (size > sizeof(buf))
add = 1;
break;
}
- addr = in_aton(c);
+ addr.ip = in_aton(c);
spin_lock_bh(&recent_lock);
- e = recent_entry_lookup(t, (const void *)&addr, NFPROTO_IPV4, 0);
+ e = recent_entry_lookup(t, &addr, NFPROTO_IPV4, 0);
if (e == NULL) {
if (add)
- recent_entry_init(t, (const void *)&addr,
- NFPROTO_IPV4, 0);
+ recent_entry_init(t, &addr, NFPROTO_IPV4, 0);
} else {
if (add)
recent_entry_update(t, e);
{
struct netlbl_af4list *entry;
- entry = netlbl_af4list_search(addr, head);
- if (entry != NULL && entry->addr == addr && entry->mask == mask) {
- netlbl_af4list_remove_entry(entry);
- return entry;
- }
-
- return NULL;
+ entry = netlbl_af4list_search_exact(addr, mask, head);
+ if (entry == NULL)
+ return NULL;
+ netlbl_af4list_remove_entry(entry);
+ return entry;
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
{
struct netlbl_af6list *entry;
- entry = netlbl_af6list_search(addr, head);
- if (entry != NULL &&
- ipv6_addr_equal(&entry->addr, addr) &&
- ipv6_addr_equal(&entry->mask, mask)) {
- netlbl_af6list_remove_entry(entry);
- return entry;
- }
-
- return NULL;
+ entry = netlbl_af6list_search_exact(addr, mask, head);
+ if (entry == NULL)
+ return NULL;
+ netlbl_af6list_remove_entry(entry);
+ return entry;
}
#endif /* IPv6 */
/* Build a packet - the conventional user limit is 236 bytes. We can
do ludicrously large NetROM frames but must not overflow */
- if (len > 65536)
- return -EMSGSIZE;
+ if (len > 65536) {
+ err = -EMSGSIZE;
+ goto out;
+ }
SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n");
size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN;
}
tp->ops = tp_ops;
tp->protocol = protocol;
- tp->prio = nprio ? : tcf_auto_prio(*back);
+ tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back));
tp->q = q;
tp->classify = tp_ops->classify;
tp->classid = parent;
if (unlikely(!skb))
return NULL;
+#ifdef CONFIG_NET_CLS_ACT
+ /*
+ * If it's at ingress let's pretend the delay is
+ * from the network (tstamp will be updated).
+ */
+ if (G_TC_FROM(skb->tc_verd) & AT_INGRESS)
+ skb->tstamp.tv64 = 0;
+#endif
pr_debug("netem_dequeue: return skb=%p\n", skb);
sch->q.qlen--;
return skb;
if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
goto out_abort;
spin_unlock(&xprt->transport_lock);
- if (xprt_connecting(xprt))
- xprt_release_write(xprt, NULL);
- else
- queue_work(rpciod_workqueue, &xprt->task_cleanup);
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ queue_work(rpciod_workqueue, &xprt->task_cleanup);
return;
out_abort:
spin_unlock(&xprt->transport_lock);
*
* This is used when all requests are complete; ie, no DRC state remains
* on the server we want to save.
+ *
+ * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with
+ * xs_reset_transport() zeroing the socket from underneath a writer.
*/
static void xs_close(struct rpc_xprt *xprt)
{
xprt_disconnect_done(xprt);
}
+static void xs_tcp_close(struct rpc_xprt *xprt)
+{
+ if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state))
+ xs_close(xprt);
+ else
+ xs_tcp_shutdown(xprt);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
xprt, -status, xprt_connected(xprt),
sock->sk->sk_state);
switch (status) {
+ default:
+ printk("%s: connect returned unhandled error %d\n",
+ __func__, status);
+ case -EADDRNOTAVAIL:
+ /* We're probably in TIME_WAIT. Get rid of existing socket,
+ * and retry
+ */
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ xprt_force_disconnect(xprt);
case -ECONNREFUSED:
case -ECONNRESET:
case -ENETUNREACH:
xprt_clear_connecting(xprt);
return;
}
- /* get rid of existing socket, and retry */
- xs_tcp_shutdown(xprt);
- printk("%s: connect returned unhandled error %d\n",
- __func__, status);
out_eagain:
status = -EAGAIN;
out:
.buf_free = rpc_free,
.send_request = xs_tcp_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
- .close = xs_tcp_shutdown,
+ .close = xs_tcp_close,
.destroy = xs_destroy,
.print_stats = xs_tcp_print_stats,
};
struct rb_node rbn;
unsigned long ts;
struct kref ref;
- bool hold;
+ bool hold, ies_allocated;
/* must be last because of priv member */
struct cfg80211_bss pub;
struct sk_buff *msg;
void *hdr;
- msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!msg)
return;
return;
}
- genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL);
+ genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
return;
nla_put_failure:
/* Caller must hold cfg80211_mutex */
void reg_device_remove(struct wiphy *wiphy)
{
- struct wiphy *request_wiphy;
+ struct wiphy *request_wiphy = NULL;
assert_cfg80211_lock();
- request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
+ if (last_request)
+ request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
kfree(wiphy->regd);
if (!last_request || !request_wiphy)
bss = container_of(ref, struct cfg80211_internal_bss, ref);
if (bss->pub.free_priv)
bss->pub.free_priv(&bss->pub);
+
+ if (bss->ies_allocated)
+ kfree(bss->pub.information_elements);
+
kfree(bss);
}
found = rb_find_bss(dev, res);
- if (found && overwrite) {
- list_replace(&found->list, &res->list);
- rb_replace_node(&found->rbn, &res->rbn,
- &dev->bss_tree);
- kref_put(&found->ref, bss_release);
- found = res;
- } else if (found) {
+ if (found) {
kref_get(&found->ref);
found->pub.beacon_interval = res->pub.beacon_interval;
found->pub.tsf = res->pub.tsf;
found->pub.signal = res->pub.signal;
found->pub.capability = res->pub.capability;
found->ts = res->ts;
+
+ /* overwrite IEs */
+ if (overwrite) {
+ size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
+ size_t ielen = res->pub.len_information_elements;
+
+ if (ksize(found) >= used + ielen) {
+ memcpy(found->pub.information_elements,
+ res->pub.information_elements, ielen);
+ found->pub.len_information_elements = ielen;
+ } else {
+ u8 *ies = found->pub.information_elements;
+
+ if (found->ies_allocated) {
+ if (ksize(ies) < ielen)
+ ies = krealloc(ies, ielen,
+ GFP_ATOMIC);
+ } else
+ ies = kmalloc(ielen, GFP_ATOMIC);
+
+ if (ies) {
+ memcpy(ies, res->pub.information_elements, ielen);
+ found->ies_allocated = true;
+ found->pub.information_elements = ies;
+ }
+ }
+ }
+
kref_put(&res->ref, bss_release);
} else {
/* this "consumes" the reference */
{
static xfrm_address_t saddr_wildcard = { };
struct net *net = xp_net(pol);
- unsigned int h;
+ unsigned int h, h_wildcard;
struct hlist_node *entry;
struct xfrm_state *x, *x0, *to_put;
int acquire_in_progress = 0;
if (best)
goto found;
- h = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
- hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) {
+ h_wildcard = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
+ hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h_wildcard, bydst) {
if (x->props.family == family &&
x->props.reqid == tmpl->reqid &&
!(x->props.flags & XFRM_STATE_WILDRECV) &&
help
This build tracepoints example modules.
+config SAMPLE_TRACE_EVENTS
+ tristate "Build trace_events examples -- loadable modules only"
+ depends on EVENT_TRACING && m
+ help
+ This build trace event example modules.
+
config SAMPLE_KOBJECT
tristate "Build kobject examples"
help
# Makefile for Linux samples code
-obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/ tracepoints/
+obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/ tracepoints/ trace_events/
--- /dev/null
+# builds the trace events example kernel modules;
+# then to use one (as root): insmod <module_name.ko>
+
+CFLAGS_trace-events-sample.o := -I$(src)
+
+obj-$(CONFIG_SAMPLE_TRACE_EVENTS) += trace-events-sample.o
--- /dev/null
+#include <linux/module.h>
+#include <linux/kthread.h>
+
+/*
+ * Any file that uses trace points, must include the header.
+ * But only one file, must include the header by defining
+ * CREATE_TRACE_POINTS first. This will make the C code that
+ * creates the handles for the trace points.
+ */
+#define CREATE_TRACE_POINTS
+#include "trace-events-sample.h"
+
+
+static void simple_thread_func(int cnt)
+{
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ trace_foo_bar("hello", cnt);
+}
+
+static int simple_thread(void *arg)
+{
+ int cnt = 0;
+
+ while (!kthread_should_stop())
+ simple_thread_func(cnt++);
+
+ return 0;
+}
+
+static struct task_struct *simple_tsk;
+
+static int __init trace_event_init(void)
+{
+ simple_tsk = kthread_run(simple_thread, NULL, "event-sample");
+ if (IS_ERR(simple_tsk))
+ return -1;
+
+ return 0;
+}
+
+static void __exit trace_event_exit(void)
+{
+ kthread_stop(simple_tsk);
+}
+
+module_init(trace_event_init);
+module_exit(trace_event_exit);
+
+MODULE_AUTHOR("Steven Rostedt");
+MODULE_DESCRIPTION("trace-events-sample");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Notice that this file is not protected like a normal header.
+ * We also must allow for rereading of this file. The
+ *
+ * || defined(TRACE_HEADER_MULTI_READ)
+ *
+ * serves this purpose.
+ */
+#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENT_SAMPLE_H
+
+/*
+ * All trace headers should include tracepoint.h, until we finally
+ * make it into a standard header.
+ */
+#include <linux/tracepoint.h>
+
+/*
+ * If TRACE_SYSTEM is defined, that will be the directory created
+ * in the ftrace directory under /debugfs/tracing/events/<system>
+ *
+ * The define_trace.h belowe will also look for a file name of
+ * TRACE_SYSTEM.h where TRACE_SYSTEM is what is defined here.
+ *
+ * If you want a different system than file name, you can override
+ * the header name by defining TRACE_INCLUDE_FILE
+ *
+ * If this file was called, goofy.h, then we would define:
+ *
+ * #define TRACE_INCLUDE_FILE goofy
+ *
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sample
+
+/*
+ * The TRACE_EVENT macro is broken up into 5 parts.
+ *
+ * name: name of the trace point. This is also how to enable the tracepoint.
+ * A function called trace_foo_bar() will be created.
+ *
+ * proto: the prototype of the function trace_foo_bar()
+ * Here it is trace_foo_bar(char *foo, int bar).
+ *
+ * args: must match the arguments in the prototype.
+ * Here it is simply "foo, bar".
+ *
+ * struct: This defines the way the data will be stored in the ring buffer.
+ * There are currently two types of elements. __field and __array.
+ * a __field is broken up into (type, name). Where type can be any
+ * type but an array.
+ * For an array. there are three fields. (type, name, size). The
+ * type of elements in the array, the name of the field and the size
+ * of the array.
+ *
+ * __array( char, foo, 10) is the same as saying char foo[10].
+ *
+ * fast_assign: This is a C like function that is used to store the items
+ * into the ring buffer.
+ *
+ * printk: This is a way to print out the data in pretty print. This is
+ * useful if the system crashes and you are logging via a serial line,
+ * the data can be printed to the console using this "printk" method.
+ *
+ * Note, that for both the assign and the printk, __entry is the handler
+ * to the data structure in the ring buffer, and is defined by the
+ * TP_STRUCT__entry.
+ */
+TRACE_EVENT(foo_bar,
+
+ TP_PROTO(char *foo, int bar),
+
+ TP_ARGS(foo, bar),
+
+ TP_STRUCT__entry(
+ __array( char, foo, 10 )
+ __field( int, bar )
+ ),
+
+ TP_fast_assign(
+ strncpy(__entry->foo, foo, 10);
+ __entry->bar = bar;
+ ),
+
+ TP_printk("foo %s %d", __entry->foo, __entry->bar)
+);
+#endif
+
+/***** NOTICE! The #if protection ends here. *****/
+
+
+/*
+ * There are several ways I could have done this. If I left out the
+ * TRACE_INCLUDE_PATH, then it would default to the kernel source
+ * include/trace/events directory.
+ *
+ * I could specify a path from the define_trace.h file back to this
+ * file.
+ *
+ * #define TRACE_INCLUDE_PATH ../../samples/trace_events
+ *
+ * But I chose to simply make it use the current directory and then in
+ * the Makefile I added:
+ *
+ * CFLAGS_trace-events-sample.o := -I$(PWD)/samples/trace_events/
+ *
+ * This will make sure the current path is part of the include
+ * structure for our file so that we can find it.
+ *
+ * I could have made only the top level directory the include:
+ *
+ * CFLAGS_trace-events-sample.o := -I$(PWD)
+ *
+ * And then let the path to this directory be the TRACE_INCLUDE_PATH:
+ *
+ * #define TRACE_INCLUDE_PATH samples/trace_events
+ *
+ * But then if something defines "samples" or "trace_events" then we
+ * could risk that being converted too, and give us an unexpected
+ * result.
+ */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+/*
+ * TRACE_INCLUDE_FILE is not needed if the filename and TRACE_SYSTEM are equal
+ */
+#define TRACE_INCLUDE_FILE trace-events-sample
+#include <trace/define_trace.h>
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
+subdir-$(CONFIG_DTC) += dtc
# Let clean descend into subdirs
subdir- += basic kconfig package selinux
--- /dev/null
+# scripts/dtc makefile
+
+hostprogs-y := dtc
+always := $(hostprogs-y)
+
+dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
+ srcpos.o checks.o
+dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
+
+# Source files need to get at the userspace version of libfdt_env.h to compile
+
+HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt
+
+HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+
+HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
+
+# dependencies on generated files need to be listed explicitly
+$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h
+$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h
+
+targets += dtc-parser.tab.c dtc-lexer.lex.c
+
+clean-files += dtc-parser.tab.h
+
+# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output
+
+ifdef GENERATE_PARSER
+
+BISON = bison
+FLEX = flex
+
+quiet_cmd_bison = BISON $@
+ cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
+quiet_cmd_flex = FLEX $@
+ cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
+
+$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE
+ $(call if_changed,bison)
+
+$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c
+
+$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE
+ $(call if_changed,flex)
+
+endif
--- /dev/null
+# Makefile.dtc
+#
+# This is not a complete Makefile of itself. Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
+ checks.c
+DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
+DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+#ifdef TRACE_CHECKS
+#define TRACE(c, ...) \
+ do { \
+ fprintf(stderr, "=== %s: ", (c)->name); \
+ fprintf(stderr, __VA_ARGS__); \
+ fprintf(stderr, "\n"); \
+ } while (0)
+#else
+#define TRACE(c, fmt, ...) do { } while (0)
+#endif
+
+enum checklevel {
+ IGNORE = 0,
+ WARN = 1,
+ ERROR = 2,
+};
+
+enum checkstatus {
+ UNCHECKED = 0,
+ PREREQ,
+ PASSED,
+ FAILED,
+};
+
+struct check;
+
+typedef void (*tree_check_fn)(struct check *c, struct node *dt);
+typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node);
+typedef void (*prop_check_fn)(struct check *c, struct node *dt,
+ struct node *node, struct property *prop);
+
+struct check {
+ const char *name;
+ tree_check_fn tree_fn;
+ node_check_fn node_fn;
+ prop_check_fn prop_fn;
+ void *data;
+ enum checklevel level;
+ enum checkstatus status;
+ int inprogress;
+ int num_prereqs;
+ struct check **prereq;
+};
+
+#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \
+ static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \
+ static struct check nm = { \
+ .name = #nm, \
+ .tree_fn = (tfn), \
+ .node_fn = (nfn), \
+ .prop_fn = (pfn), \
+ .data = (d), \
+ .level = (lvl), \
+ .status = UNCHECKED, \
+ .num_prereqs = ARRAY_SIZE(nm##_prereqs), \
+ .prereq = nm##_prereqs, \
+ };
+
+#define TREE_CHECK(nm, d, lvl, ...) \
+ CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__)
+#define NODE_CHECK(nm, d, lvl, ...) \
+ CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__)
+#define PROP_CHECK(nm, d, lvl, ...) \
+ CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__)
+#define BATCH_CHECK(nm, lvl, ...) \
+ CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__)
+
+#ifdef __GNUC__
+static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
+#endif
+static inline void check_msg(struct check *c, const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+
+ if ((c->level < WARN) || (c->level <= quiet))
+ return; /* Suppress message */
+
+ fprintf(stderr, "%s (%s): ",
+ (c->level == ERROR) ? "ERROR" : "Warning", c->name);
+ vfprintf(stderr, fmt, ap);
+ fprintf(stderr, "\n");
+}
+
+#define FAIL(c, ...) \
+ do { \
+ TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
+ (c)->status = FAILED; \
+ check_msg((c), __VA_ARGS__); \
+ } while (0)
+
+static void check_nodes_props(struct check *c, struct node *dt, struct node *node)
+{
+ struct node *child;
+ struct property *prop;
+
+ TRACE(c, "%s", node->fullpath);
+ if (c->node_fn)
+ c->node_fn(c, dt, node);
+
+ if (c->prop_fn)
+ for_each_property(node, prop) {
+ TRACE(c, "%s\t'%s'", node->fullpath, prop->name);
+ c->prop_fn(c, dt, node, prop);
+ }
+
+ for_each_child(node, child)
+ check_nodes_props(c, dt, child);
+}
+
+static int run_check(struct check *c, struct node *dt)
+{
+ int error = 0;
+ int i;
+
+ assert(!c->inprogress);
+
+ if (c->status != UNCHECKED)
+ goto out;
+
+ c->inprogress = 1;
+
+ for (i = 0; i < c->num_prereqs; i++) {
+ struct check *prq = c->prereq[i];
+ error |= run_check(prq, dt);
+ if (prq->status != PASSED) {
+ c->status = PREREQ;
+ check_msg(c, "Failed prerequisite '%s'",
+ c->prereq[i]->name);
+ }
+ }
+
+ if (c->status != UNCHECKED)
+ goto out;
+
+ if (c->node_fn || c->prop_fn)
+ check_nodes_props(c, dt, dt);
+
+ if (c->tree_fn)
+ c->tree_fn(c, dt);
+ if (c->status == UNCHECKED)
+ c->status = PASSED;
+
+ TRACE(c, "\tCompleted, status %d", c->status);
+
+out:
+ c->inprogress = 0;
+ if ((c->status != PASSED) && (c->level == ERROR))
+ error = 1;
+ return error;
+}
+
+/*
+ * Utility check functions
+ */
+
+static void check_is_string(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property *prop;
+ char *propname = c->data;
+
+ prop = get_property(node, propname);
+ if (!prop)
+ return; /* Not present, assumed ok */
+
+ if (!data_is_one_string(prop->val))
+ FAIL(c, "\"%s\" property in %s is not a string",
+ propname, node->fullpath);
+}
+#define CHECK_IS_STRING(nm, propname, lvl) \
+ CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl))
+
+static void check_is_cell(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property *prop;
+ char *propname = c->data;
+
+ prop = get_property(node, propname);
+ if (!prop)
+ return; /* Not present, assumed ok */
+
+ if (prop->val.len != sizeof(cell_t))
+ FAIL(c, "\"%s\" property in %s is not a single cell",
+ propname, node->fullpath);
+}
+#define CHECK_IS_CELL(nm, propname, lvl) \
+ CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl))
+
+/*
+ * Structural check functions
+ */
+
+static void check_duplicate_node_names(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct node *child, *child2;
+
+ for_each_child(node, child)
+ for (child2 = child->next_sibling;
+ child2;
+ child2 = child2->next_sibling)
+ if (streq(child->name, child2->name))
+ FAIL(c, "Duplicate node name %s",
+ child->fullpath);
+}
+NODE_CHECK(duplicate_node_names, NULL, ERROR);
+
+static void check_duplicate_property_names(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop, *prop2;
+
+ for_each_property(node, prop)
+ for (prop2 = prop->next; prop2; prop2 = prop2->next)
+ if (streq(prop->name, prop2->name))
+ FAIL(c, "Duplicate property name %s in %s",
+ prop->name, node->fullpath);
+}
+NODE_CHECK(duplicate_property_names, NULL, ERROR);
+
+#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
+#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+#define DIGITS "0123456789"
+#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
+
+static void check_node_name_chars(struct check *c, struct node *dt,
+ struct node *node)
+{
+ int n = strspn(node->name, c->data);
+
+ if (n < strlen(node->name))
+ FAIL(c, "Bad character '%c' in node %s",
+ node->name[n], node->fullpath);
+}
+NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
+
+static void check_node_name_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ if (strchr(get_unitname(node), '@'))
+ FAIL(c, "Node %s has multiple '@' characters in name",
+ node->fullpath);
+}
+NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
+
+static void check_property_name_chars(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ int n = strspn(prop->name, c->data);
+
+ if (n < strlen(prop->name))
+ FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
+ prop->name[n], prop->name, node->fullpath);
+}
+PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
+
+static void check_explicit_phandles(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property *prop;
+ struct node *other;
+ cell_t phandle;
+
+ prop = get_property(node, "linux,phandle");
+ if (! prop)
+ return; /* No phandle, that's fine */
+
+ if (prop->val.len != sizeof(cell_t)) {
+ FAIL(c, "%s has bad length (%d) linux,phandle property",
+ node->fullpath, prop->val.len);
+ return;
+ }
+
+ phandle = propval_cell(prop);
+ if ((phandle == 0) || (phandle == -1)) {
+ FAIL(c, "%s has invalid linux,phandle value 0x%x",
+ node->fullpath, phandle);
+ return;
+ }
+
+ other = get_node_by_phandle(root, phandle);
+ if (other) {
+ FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
+ node->fullpath, phandle, other->fullpath);
+ return;
+ }
+
+ node->phandle = phandle;
+}
+NODE_CHECK(explicit_phandles, NULL, ERROR);
+
+static void check_name_properties(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property **pp, *prop = NULL;
+
+ for (pp = &node->proplist; *pp; pp = &((*pp)->next))
+ if (streq((*pp)->name, "name")) {
+ prop = *pp;
+ break;
+ }
+
+ if (!prop)
+ return; /* No name property, that's fine */
+
+ if ((prop->val.len != node->basenamelen+1)
+ || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
+ FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
+ " of base node name)", node->fullpath, prop->val.val);
+ } else {
+ /* The name property is correct, and therefore redundant.
+ * Delete it */
+ *pp = prop->next;
+ free(prop->name);
+ data_free(prop->val);
+ free(prop);
+ }
+}
+CHECK_IS_STRING(name_is_string, "name", ERROR);
+NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
+
+/*
+ * Reference fixup functions
+ */
+
+static void fixup_phandle_references(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ struct marker *m = prop->val.markers;
+ struct node *refnode;
+ cell_t phandle;
+
+ for_each_marker_of_type(m, REF_PHANDLE) {
+ assert(m->offset + sizeof(cell_t) <= prop->val.len);
+
+ refnode = get_node_by_ref(dt, m->ref);
+ if (! refnode) {
+ FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+ m->ref);
+ continue;
+ }
+
+ phandle = get_node_phandle(dt, refnode);
+ *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
+ }
+}
+CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
+ &duplicate_node_names, &explicit_phandles);
+
+static void fixup_path_references(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ struct marker *m = prop->val.markers;
+ struct node *refnode;
+ char *path;
+
+ for_each_marker_of_type(m, REF_PATH) {
+ assert(m->offset <= prop->val.len);
+
+ refnode = get_node_by_ref(dt, m->ref);
+ if (!refnode) {
+ FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+ m->ref);
+ continue;
+ }
+
+ path = refnode->fullpath;
+ prop->val = data_insert_at_marker(prop->val, m, path,
+ strlen(path) + 1);
+ }
+}
+CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR,
+ &duplicate_node_names);
+
+/*
+ * Semantic checks
+ */
+CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN);
+CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN);
+CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN);
+
+CHECK_IS_STRING(device_type_is_string, "device_type", WARN);
+CHECK_IS_STRING(model_is_string, "model", WARN);
+CHECK_IS_STRING(status_is_string, "status", WARN);
+
+static void fixup_addr_size_cells(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop;
+
+ node->addr_cells = -1;
+ node->size_cells = -1;
+
+ prop = get_property(node, "#address-cells");
+ if (prop)
+ node->addr_cells = propval_cell(prop);
+
+ prop = get_property(node, "#size-cells");
+ if (prop)
+ node->size_cells = propval_cell(prop);
+}
+CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN,
+ &address_cells_is_cell, &size_cells_is_cell);
+
+#define node_addr_cells(n) \
+ (((n)->addr_cells == -1) ? 2 : (n)->addr_cells)
+#define node_size_cells(n) \
+ (((n)->size_cells == -1) ? 1 : (n)->size_cells)
+
+static void check_reg_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop;
+ int addr_cells, size_cells, entrylen;
+
+ prop = get_property(node, "reg");
+ if (!prop)
+ return; /* No "reg", that's fine */
+
+ if (!node->parent) {
+ FAIL(c, "Root node has a \"reg\" property");
+ return;
+ }
+
+ if (prop->val.len == 0)
+ FAIL(c, "\"reg\" property in %s is empty", node->fullpath);
+
+ addr_cells = node_addr_cells(node->parent);
+ size_cells = node_size_cells(node->parent);
+ entrylen = (addr_cells + size_cells) * sizeof(cell_t);
+
+ if ((prop->val.len % entrylen) != 0)
+ FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) "
+ "(#address-cells == %d, #size-cells == %d)",
+ node->fullpath, prop->val.len, addr_cells, size_cells);
+}
+NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells);
+
+static void check_ranges_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop;
+ int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
+
+ prop = get_property(node, "ranges");
+ if (!prop)
+ return;
+
+ if (!node->parent) {
+ FAIL(c, "Root node has a \"ranges\" property");
+ return;
+ }
+
+ p_addr_cells = node_addr_cells(node->parent);
+ p_size_cells = node_size_cells(node->parent);
+ c_addr_cells = node_addr_cells(node);
+ c_size_cells = node_size_cells(node);
+ entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t);
+
+ if (prop->val.len == 0) {
+ if (p_addr_cells != c_addr_cells)
+ FAIL(c, "%s has empty \"ranges\" property but its "
+ "#address-cells (%d) differs from %s (%d)",
+ node->fullpath, c_addr_cells, node->parent->fullpath,
+ p_addr_cells);
+ if (p_size_cells != c_size_cells)
+ FAIL(c, "%s has empty \"ranges\" property but its "
+ "#size-cells (%d) differs from %s (%d)",
+ node->fullpath, c_size_cells, node->parent->fullpath,
+ p_size_cells);
+ } else if ((prop->val.len % entrylen) != 0) {
+ FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) "
+ "(parent #address-cells == %d, child #address-cells == %d, "
+ "#size-cells == %d)", node->fullpath, prop->val.len,
+ p_addr_cells, c_addr_cells, c_size_cells);
+ }
+}
+NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells);
+
+/*
+ * Style checks
+ */
+static void check_avoid_default_addr_size(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *reg, *ranges;
+
+ if (!node->parent)
+ return; /* Ignore root node */
+
+ reg = get_property(node, "reg");
+ ranges = get_property(node, "ranges");
+
+ if (!reg && !ranges)
+ return;
+
+ if ((node->parent->addr_cells == -1))
+ FAIL(c, "Relying on default #address-cells value for %s",
+ node->fullpath);
+
+ if ((node->parent->size_cells == -1))
+ FAIL(c, "Relying on default #size-cells value for %s",
+ node->fullpath);
+}
+NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells);
+
+static void check_obsolete_chosen_interrupt_controller(struct check *c,
+ struct node *dt)
+{
+ struct node *chosen;
+ struct property *prop;
+
+ chosen = get_node_by_path(dt, "/chosen");
+ if (!chosen)
+ return;
+
+ prop = get_property(chosen, "interrupt-controller");
+ if (prop)
+ FAIL(c, "/chosen has obsolete \"interrupt-controller\" "
+ "property");
+}
+TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
+
+static struct check *check_table[] = {
+ &duplicate_node_names, &duplicate_property_names,
+ &node_name_chars, &node_name_format, &property_name_chars,
+ &name_is_string, &name_properties,
+ &explicit_phandles,
+ &phandle_references, &path_references,
+
+ &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell,
+ &device_type_is_string, &model_is_string, &status_is_string,
+
+ &addr_size_cells, ®_format, &ranges_format,
+
+ &avoid_default_addr_size,
+ &obsolete_chosen_interrupt_controller,
+};
+
+void process_checks(int force, struct boot_info *bi)
+{
+ struct node *dt = bi->dt;
+ int i;
+ int error = 0;
+
+ for (i = 0; i < ARRAY_SIZE(check_table); i++) {
+ struct check *c = check_table[i];
+
+ if (c->level != IGNORE)
+ error = error || run_check(c, dt);
+ }
+
+ if (error) {
+ if (!force) {
+ fprintf(stderr, "ERROR: Input tree has errors, aborting "
+ "(use -f to force output)\n");
+ exit(2);
+ } else if (quiet < 3) {
+ fprintf(stderr, "Warning: Input tree has errors, "
+ "output forced\n");
+ }
+ }
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+void data_free(struct data d)
+{
+ struct marker *m, *nm;
+
+ m = d.markers;
+ while (m) {
+ nm = m->next;
+ free(m->ref);
+ free(m);
+ m = nm;
+ }
+
+ if (d.val)
+ free(d.val);
+}
+
+struct data data_grow_for(struct data d, int xlen)
+{
+ struct data nd;
+ int newsize;
+
+ if (xlen == 0)
+ return d;
+
+ nd = d;
+
+ newsize = xlen;
+
+ while ((d.len + xlen) > newsize)
+ newsize *= 2;
+
+ nd.val = xrealloc(d.val, newsize);
+
+ return nd;
+}
+
+struct data data_copy_mem(const char *mem, int len)
+{
+ struct data d;
+
+ d = data_grow_for(empty_data, len);
+
+ d.len = len;
+ memcpy(d.val, mem, len);
+
+ return d;
+}
+
+static char get_oct_char(const char *s, int *i)
+{
+ char x[4];
+ char *endx;
+ long val;
+
+ x[3] = '\0';
+ strncpy(x, s + *i, 3);
+
+ val = strtol(x, &endx, 8);
+
+ assert(endx > x);
+
+ (*i) += endx - x;
+ return val;
+}
+
+static char get_hex_char(const char *s, int *i)
+{
+ char x[3];
+ char *endx;
+ long val;
+
+ x[2] = '\0';
+ strncpy(x, s + *i, 2);
+
+ val = strtol(x, &endx, 16);
+ if (!(endx > x))
+ die("\\x used with no following hex digits\n");
+
+ (*i) += endx - x;
+ return val;
+}
+
+struct data data_copy_escape_string(const char *s, int len)
+{
+ int i = 0;
+ struct data d;
+ char *q;
+
+ d = data_grow_for(empty_data, strlen(s)+1);
+
+ q = d.val;
+ while (i < len) {
+ char c = s[i++];
+
+ if (c != '\\') {
+ q[d.len++] = c;
+ continue;
+ }
+
+ c = s[i++];
+ assert(c);
+ switch (c) {
+ case 'a':
+ q[d.len++] = '\a';
+ break;
+ case 'b':
+ q[d.len++] = '\b';
+ break;
+ case 't':
+ q[d.len++] = '\t';
+ break;
+ case 'n':
+ q[d.len++] = '\n';
+ break;
+ case 'v':
+ q[d.len++] = '\v';
+ break;
+ case 'f':
+ q[d.len++] = '\f';
+ break;
+ case 'r':
+ q[d.len++] = '\r';
+ break;
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ i--; /* need to re-read the first digit as
+ * part of the octal value */
+ q[d.len++] = get_oct_char(s, &i);
+ break;
+ case 'x':
+ q[d.len++] = get_hex_char(s, &i);
+ break;
+ default:
+ q[d.len++] = c;
+ }
+ }
+
+ q[d.len++] = '\0';
+ return d;
+}
+
+struct data data_copy_file(FILE *f, size_t maxlen)
+{
+ struct data d = empty_data;
+
+ while (!feof(f) && (d.len < maxlen)) {
+ size_t chunksize, ret;
+
+ if (maxlen == -1)
+ chunksize = 4096;
+ else
+ chunksize = maxlen - d.len;
+
+ d = data_grow_for(d, chunksize);
+ ret = fread(d.val + d.len, 1, chunksize, f);
+
+ if (ferror(f))
+ die("Error reading file into data: %s", strerror(errno));
+
+ if (d.len + ret < d.len)
+ die("Overflow reading file into data\n");
+
+ d.len += ret;
+ }
+
+ return d;
+}
+
+struct data data_append_data(struct data d, const void *p, int len)
+{
+ d = data_grow_for(d, len);
+ memcpy(d.val + d.len, p, len);
+ d.len += len;
+ return d;
+}
+
+struct data data_insert_at_marker(struct data d, struct marker *m,
+ const void *p, int len)
+{
+ d = data_grow_for(d, len);
+ memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset);
+ memcpy(d.val + m->offset, p, len);
+ d.len += len;
+
+ /* Adjust all markers after the one we're inserting at */
+ m = m->next;
+ for_each_marker(m)
+ m->offset += len;
+ return d;
+}
+
+struct data data_append_markers(struct data d, struct marker *m)
+{
+ struct marker **mp = &d.markers;
+
+ /* Find the end of the markerlist */
+ while (*mp)
+ mp = &((*mp)->next);
+ *mp = m;
+ return d;
+}
+
+struct data data_merge(struct data d1, struct data d2)
+{
+ struct data d;
+ struct marker *m2 = d2.markers;
+
+ d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2);
+
+ /* Adjust for the length of d1 */
+ for_each_marker(m2)
+ m2->offset += d1.len;
+
+ d2.markers = NULL; /* So data_free() doesn't clobber them */
+ data_free(d2);
+
+ return d;
+}
+
+struct data data_append_cell(struct data d, cell_t word)
+{
+ cell_t beword = cpu_to_fdt32(word);
+
+ return data_append_data(d, &beword, sizeof(beword));
+}
+
+struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
+{
+ struct fdt_reserve_entry bere;
+
+ bere.address = cpu_to_fdt64(re->address);
+ bere.size = cpu_to_fdt64(re->size);
+
+ return data_append_data(d, &bere, sizeof(bere));
+}
+
+struct data data_append_addr(struct data d, uint64_t addr)
+{
+ uint64_t beaddr = cpu_to_fdt64(addr);
+
+ return data_append_data(d, &beaddr, sizeof(beaddr));
+}
+
+struct data data_append_byte(struct data d, uint8_t byte)
+{
+ return data_append_data(d, &byte, 1);
+}
+
+struct data data_append_zeroes(struct data d, int len)
+{
+ d = data_grow_for(d, len);
+
+ memset(d.val + d.len, 0, len);
+ d.len += len;
+ return d;
+}
+
+struct data data_append_align(struct data d, int align)
+{
+ int newlen = ALIGN(d.len, align);
+ return data_append_zeroes(d, newlen - d.len);
+}
+
+struct data data_add_marker(struct data d, enum markertype type, char *ref)
+{
+ struct marker *m;
+
+ m = xmalloc(sizeof(*m));
+ m->offset = d.len;
+ m->type = type;
+ m->ref = ref;
+ m->next = NULL;
+
+ return data_append_markers(d, m);
+}
+
+int data_is_one_string(struct data d)
+{
+ int i;
+ int len = d.len;
+
+ if (len == 0)
+ return 0;
+
+ for (i = 0; i < len-1; i++)
+ if (d.val[i] == '\0')
+ return 0;
+
+ if (d.val[len-1] != '\0')
+ return 0;
+
+ return 1;
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+%option noyywrap nounput yylineno
+
+%x INCLUDE
+%x BYTESTRING
+%x PROPNODENAME
+%s V1
+
+PROPNODECHAR [a-zA-Z0-9,._+*#?@-]
+PATHCHAR ({PROPNODECHAR}|[/])
+LABEL [a-zA-Z_][a-zA-Z0-9_]*
+STRING \"([^\\"]|\\.)*\"
+WS [[:space:]]
+COMMENT "/*"([^*]|\*+[^*/])*\*+"/"
+LINECOMMENT "//".*\n
+
+%{
+#include "dtc.h"
+#include "srcpos.h"
+#include "dtc-parser.tab.h"
+
+
+/*#define LEXDEBUG 1*/
+
+#ifdef LEXDEBUG
+#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
+#else
+#define DPRINT(fmt, ...) do { } while (0)
+#endif
+
+static int dts_version; /* = 0 */
+
+#define BEGIN_DEFAULT() if (dts_version == 0) { \
+ DPRINT("<INITIAL>\n"); \
+ BEGIN(INITIAL); \
+ } else { \
+ DPRINT("<V1>\n"); \
+ BEGIN(V1); \
+ }
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
+%}
+
+%%
+<*>"/include/"{WS}*{STRING} {
+ char *name = strchr(yytext, '\"') + 1;
+ yytext[yyleng-1] = '\0';
+ push_input_file(name);
+ }
+
+<*><<EOF>> {
+ if (!pop_input_file()) {
+ yyterminate();
+ }
+ }
+
+<*>{STRING} {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("String: %s\n", yytext);
+ yylval.data = data_copy_escape_string(yytext+1,
+ yyleng-2);
+ yylloc.first_line = yylineno;
+ return DT_STRING;
+ }
+
+<*>"/dts-v1/" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /dts-v1/\n");
+ dts_version = 1;
+ BEGIN_DEFAULT();
+ return DT_V1;
+ }
+
+<*>"/memreserve/" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /memreserve/\n");
+ BEGIN_DEFAULT();
+ return DT_MEMRESERVE;
+ }
+
+<*>{LABEL}: {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Label: %s\n", yytext);
+ yylval.labelref = strdup(yytext);
+ yylval.labelref[yyleng-1] = '\0';
+ return DT_LABEL;
+ }
+
+<INITIAL>[bodh]# {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ if (*yytext == 'b')
+ yylval.cbase = 2;
+ else if (*yytext == 'o')
+ yylval.cbase = 8;
+ else if (*yytext == 'd')
+ yylval.cbase = 10;
+ else
+ yylval.cbase = 16;
+ DPRINT("Base: %d\n", yylval.cbase);
+ return DT_BASE;
+ }
+
+<INITIAL>[0-9a-fA-F]+ {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LEGACYLITERAL;
+ }
+
+<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LITERAL;
+ }
+
+\&{LABEL} { /* label reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+
+"&{/"{PATHCHAR}+\} { /* new-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yytext[yyleng-1] = '\0';
+ DPRINT("Ref: %s\n", yytext+2);
+ yylval.labelref = strdup(yytext+2);
+ return DT_REF;
+ }
+
+<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+
+<BYTESTRING>[0-9a-fA-F]{2} {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.byte = strtol(yytext, NULL, 16);
+ DPRINT("Byte: %02x\n", (int)yylval.byte);
+ return DT_BYTE;
+ }
+
+<BYTESTRING>"]" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("/BYTESTRING\n");
+ BEGIN_DEFAULT();
+ return ']';
+ }
+
+<PROPNODENAME>{PROPNODECHAR}+ {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("PropNodeName: %s\n", yytext);
+ yylval.propnodename = strdup(yytext);
+ BEGIN_DEFAULT();
+ return DT_PROPNODENAME;
+ }
+
+"/incbin/" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Binary Include\n");
+ return DT_INCBIN;
+ }
+
+<*>{WS}+ /* eat whitespace */
+<*>{COMMENT}+ /* eat C-style comments */
+<*>{LINECOMMENT}+ /* eat C++-style comments */
+
+<*>. {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Char: %c (\\x%02x)\n", yytext[0],
+ (unsigned)yytext[0]);
+ if (yytext[0] == '[') {
+ DPRINT("<BYTESTRING>\n");
+ BEGIN(BYTESTRING);
+ }
+ if ((yytext[0] == '{')
+ || (yytext[0] == ';')) {
+ DPRINT("<PROPNODENAME>\n");
+ BEGIN(PROPNODENAME);
+ }
+ return yytext[0];
+ }
+
+%%
+
+
+/*
+ * Stack of nested include file contexts.
+ */
+
+struct incl_file {
+ struct dtc_file *file;
+ YY_BUFFER_STATE yy_prev_buf;
+ int yy_prev_lineno;
+ struct incl_file *prev;
+};
+
+static struct incl_file *incl_file_stack;
+
+
+/*
+ * Detect infinite include recursion.
+ */
+#define MAX_INCLUDE_DEPTH (100)
+
+static int incl_depth = 0;
+
+
+static void push_input_file(const char *filename)
+{
+ struct incl_file *incl_file;
+ struct dtc_file *newfile;
+ struct search_path search, *searchptr = NULL;
+
+ assert(filename);
+
+ if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+ die("Includes nested too deeply");
+
+ if (srcpos_file) {
+ search.dir = srcpos_file->dir;
+ search.next = NULL;
+ search.prev = NULL;
+ searchptr = &search;
+ }
+
+ newfile = dtc_open_file(filename, searchptr);
+
+ incl_file = xmalloc(sizeof(struct incl_file));
+
+ /*
+ * Save current context.
+ */
+ incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
+ incl_file->yy_prev_lineno = yylineno;
+ incl_file->file = srcpos_file;
+ incl_file->prev = incl_file_stack;
+
+ incl_file_stack = incl_file;
+
+ /*
+ * Establish new context.
+ */
+ srcpos_file = newfile;
+ yylineno = 1;
+ yyin = newfile->file;
+ yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
+}
+
+
+static int pop_input_file(void)
+{
+ struct incl_file *incl_file;
+
+ if (incl_file_stack == 0)
+ return 0;
+
+ dtc_close_file(srcpos_file);
+
+ /*
+ * Pop.
+ */
+ --incl_depth;
+ incl_file = incl_file_stack;
+ incl_file_stack = incl_file->prev;
+
+ /*
+ * Recover old context.
+ */
+ yy_delete_buffer(YY_CURRENT_BUFFER);
+ yy_switch_to_buffer(incl_file->yy_prev_buf);
+ yylineno = incl_file->yy_prev_lineno;
+ srcpos_file = incl_file->file;
+ yyin = incl_file->file ? incl_file->file->file : NULL;
+
+ /*
+ * Free old state.
+ */
+ free(incl_file);
+
+ return 1;
+}
--- /dev/null
+#line 2 "dtc-lexer.lex.c"
+
+#line 4 "dtc-lexer.lex.c"
+
+#define YY_INT_ALIGNED short int
+
+/* A lexical scanner generated by flex */
+
+#define FLEX_SCANNER
+#define YY_FLEX_MAJOR_VERSION 2
+#define YY_FLEX_MINOR_VERSION 5
+#define YY_FLEX_SUBMINOR_VERSION 34
+#if YY_FLEX_SUBMINOR_VERSION > 0
+#define FLEX_BETA
+#endif
+
+/* First, we deal with platform-specific or compiler-specific issues. */
+
+/* begin standard C headers. */
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+
+/* end standard C headers. */
+
+/* flex integer type definitions */
+
+#ifndef FLEXINT_H
+#define FLEXINT_H
+
+/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
+
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+
+/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
+ * if you want the limit (max/min) macros for int types.
+ */
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS 1
+#endif
+
+#include <inttypes.h>
+typedef int8_t flex_int8_t;
+typedef uint8_t flex_uint8_t;
+typedef int16_t flex_int16_t;
+typedef uint16_t flex_uint16_t;
+typedef int32_t flex_int32_t;
+typedef uint32_t flex_uint32_t;
+#else
+typedef signed char flex_int8_t;
+typedef short int flex_int16_t;
+typedef int flex_int32_t;
+typedef unsigned char flex_uint8_t;
+typedef unsigned short int flex_uint16_t;
+typedef unsigned int flex_uint32_t;
+#endif /* ! C99 */
+
+/* Limits of integral types. */
+#ifndef INT8_MIN
+#define INT8_MIN (-128)
+#endif
+#ifndef INT16_MIN
+#define INT16_MIN (-32767-1)
+#endif
+#ifndef INT32_MIN
+#define INT32_MIN (-2147483647-1)
+#endif
+#ifndef INT8_MAX
+#define INT8_MAX (127)
+#endif
+#ifndef INT16_MAX
+#define INT16_MAX (32767)
+#endif
+#ifndef INT32_MAX
+#define INT32_MAX (2147483647)
+#endif
+#ifndef UINT8_MAX
+#define UINT8_MAX (255U)
+#endif
+#ifndef UINT16_MAX
+#define UINT16_MAX (65535U)
+#endif
+#ifndef UINT32_MAX
+#define UINT32_MAX (4294967295U)
+#endif
+
+#endif /* ! FLEXINT_H */
+
+#ifdef __cplusplus
+
+/* The "const" storage-class-modifier is valid. */
+#define YY_USE_CONST
+
+#else /* ! __cplusplus */
+
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
+
+#define YY_USE_CONST
+
+#endif /* defined (__STDC__) */
+#endif /* ! __cplusplus */
+
+#ifdef YY_USE_CONST
+#define yyconst const
+#else
+#define yyconst
+#endif
+
+/* Returned upon end-of-file. */
+#define YY_NULL 0
+
+/* Promotes a possibly negative, possibly signed char to an unsigned
+ * integer for use as an array index. If the signed char is negative,
+ * we want to instead treat it as an 8-bit unsigned char, hence the
+ * double cast.
+ */
+#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
+
+/* Enter a start condition. This macro really ought to take a parameter,
+ * but we do it the disgusting crufty way forced on us by the ()-less
+ * definition of BEGIN.
+ */
+#define BEGIN (yy_start) = 1 + 2 *
+
+/* Translate the current start state into a value that can be later handed
+ * to BEGIN to return to the state. The YYSTATE alias is for lex
+ * compatibility.
+ */
+#define YY_START (((yy_start) - 1) / 2)
+#define YYSTATE YY_START
+
+/* Action number for EOF rule of a given start state. */
+#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
+
+/* Special action meaning "start processing a new file". */
+#define YY_NEW_FILE yyrestart(yyin )
+
+#define YY_END_OF_BUFFER_CHAR 0
+
+/* Size of default input buffer. */
+#ifndef YY_BUF_SIZE
+#define YY_BUF_SIZE 16384
+#endif
+
+/* The state buf must be large enough to hold one state per character in the main buffer.
+ */
+#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
+
+#ifndef YY_TYPEDEF_YY_BUFFER_STATE
+#define YY_TYPEDEF_YY_BUFFER_STATE
+typedef struct yy_buffer_state *YY_BUFFER_STATE;
+#endif
+
+extern int yyleng;
+
+extern FILE *yyin, *yyout;
+
+#define EOB_ACT_CONTINUE_SCAN 0
+#define EOB_ACT_END_OF_FILE 1
+#define EOB_ACT_LAST_MATCH 2
+
+ /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
+ * access to the local variable yy_act. Since yyless() is a macro, it would break
+ * existing scanners that call yyless() from OUTSIDE yylex.
+ * One obvious solution it to make yy_act a global. I tried that, and saw
+ * a 5% performance hit in a non-yylineno scanner, because yy_act is
+ * normally declared as a register variable-- so it is not worth it.
+ */
+ #define YY_LESS_LINENO(n) \
+ do { \
+ int yyl;\
+ for ( yyl = n; yyl < yyleng; ++yyl )\
+ if ( yytext[yyl] == '\n' )\
+ --yylineno;\
+ }while(0)
+
+/* Return all but the first "n" matched characters back to the input stream. */
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up yytext again */ \
+ } \
+ while ( 0 )
+
+#define unput(c) yyunput( c, (yytext_ptr) )
+
+/* The following is because we cannot portably get our hands on size_t
+ * (without autoconf's help, which isn't available because we want
+ * flex-generated scanners to compile on their own).
+ * Given that the standard has decreed that size_t exists since 1989,
+ * I guess we can afford to depend on it. Manoj.
+ */
+
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef size_t yy_size_t;
+#endif
+
+#ifndef YY_STRUCT_YY_BUFFER_STATE
+#define YY_STRUCT_YY_BUFFER_STATE
+struct yy_buffer_state
+ {
+ FILE *yy_input_file;
+
+ char *yy_ch_buf; /* input buffer */
+ char *yy_buf_pos; /* current position in input buffer */
+
+ /* Size of input buffer in bytes, not including room for EOB
+ * characters.
+ */
+ yy_size_t yy_buf_size;
+
+ /* Number of characters read into yy_ch_buf, not including EOB
+ * characters.
+ */
+ int yy_n_chars;
+
+ /* Whether we "own" the buffer - i.e., we know we created it,
+ * and can realloc() it to grow it, and should free() it to
+ * delete it.
+ */
+ int yy_is_our_buffer;
+
+ /* Whether this is an "interactive" input source; if so, and
+ * if we're using stdio for input, then we want to use getc()
+ * instead of fread(), to make sure we stop fetching input after
+ * each newline.
+ */
+ int yy_is_interactive;
+
+ /* Whether we're considered to be at the beginning of a line.
+ * If so, '^' rules will be active on the next match, otherwise
+ * not.
+ */
+ int yy_at_bol;
+
+ int yy_bs_lineno; /**< The line count. */
+ int yy_bs_column; /**< The column count. */
+
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
+
+ int yy_buffer_status;
+
+#define YY_BUFFER_NEW 0
+#define YY_BUFFER_NORMAL 1
+ /* When an EOF's been seen but there's still some text to process
+ * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+ * shouldn't try reading from the input source any more. We might
+ * still have a bunch of tokens to match, though, because of
+ * possible backing-up.
+ *
+ * When we actually see the EOF, we change the status to "new"
+ * (via yyrestart()), so that the user can continue scanning by
+ * just pointing yyin at a new input file.
+ */
+#define YY_BUFFER_EOF_PENDING 2
+
+ };
+#endif /* !YY_STRUCT_YY_BUFFER_STATE */
+
+/* Stack of input buffers. */
+static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
+static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
+static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+
+/* We provide macros for accessing buffer states in case in the
+ * future we want to put the buffer states in a more general
+ * "scanner state".
+ *
+ * Returns the top of the stack, or NULL.
+ */
+#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
+ ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
+ : NULL)
+
+/* Same as previous macro, but useful when we know that the buffer stack is not
+ * NULL or when we need an lvalue. For internal use only.
+ */
+#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
+
+/* yy_hold_char holds the character lost when yytext is formed. */
+static char yy_hold_char;
+static int yy_n_chars; /* number of characters read into yy_ch_buf */
+int yyleng;
+
+/* Points to current character in buffer. */
+static char *yy_c_buf_p = (char *) 0;
+static int yy_init = 0; /* whether we need to initialize */
+static int yy_start = 0; /* start state number */
+
+/* Flag which is used to allow yywrap()'s to do buffer switches
+ * instead of setting up a fresh yyin. A bit of a hack ...
+ */
+static int yy_did_buffer_switch_on_eof;
+
+void yyrestart (FILE *input_file );
+void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
+YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
+void yy_delete_buffer (YY_BUFFER_STATE b );
+void yy_flush_buffer (YY_BUFFER_STATE b );
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
+void yypop_buffer_state (void );
+
+static void yyensure_buffer_stack (void );
+static void yy_load_buffer_state (void );
+static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
+
+#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
+
+YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
+YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
+YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
+
+void *yyalloc (yy_size_t );
+void *yyrealloc (void *,yy_size_t );
+void yyfree (void * );
+
+#define yy_new_buffer yy_create_buffer
+
+#define yy_set_interactive(is_interactive) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){ \
+ yyensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
+
+#define yy_set_bol(at_bol) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){\
+ yyensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
+
+#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
+
+/* Begin user sect3 */
+
+#define yywrap(n) 1
+#define YY_SKIP_YYWRAP
+
+typedef unsigned char YY_CHAR;
+
+FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
+
+typedef int yy_state_type;
+
+extern int yylineno;
+
+int yylineno = 1;
+
+extern char *yytext;
+#define yytext_ptr yytext
+
+static yy_state_type yy_get_previous_state (void );
+static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
+static int yy_get_next_buffer (void );
+static void yy_fatal_error (yyconst char msg[] );
+
+/* Done after the current pattern has been matched and before the
+ * corresponding action - sets up yytext.
+ */
+#define YY_DO_BEFORE_ACTION \
+ (yytext_ptr) = yy_bp; \
+ yyleng = (size_t) (yy_cp - yy_bp); \
+ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+ (yy_c_buf_p) = yy_cp;
+
+#define YY_NUM_RULES 20
+#define YY_END_OF_BUFFER 21
+/* This struct is not used in this scanner,
+ but its presence is necessary. */
+struct yy_trans_info
+ {
+ flex_int32_t yy_verify;
+ flex_int32_t yy_nxt;
+ };
+static yyconst flex_int16_t yy_accept[104] =
+ { 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 21, 19, 16, 16, 19, 19, 19, 7, 7, 19,
+ 7, 19, 19, 19, 19, 13, 14, 14, 19, 8,
+ 8, 16, 0, 2, 0, 0, 9, 0, 0, 0,
+ 0, 0, 0, 7, 7, 5, 0, 6, 0, 12,
+ 12, 14, 14, 8, 0, 11, 9, 0, 0, 0,
+ 0, 18, 0, 0, 0, 0, 8, 0, 17, 0,
+ 0, 0, 0, 0, 10, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 15,
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
+
+ 0, 4, 0
+ } ;
+
+static yyconst flex_int32_t yy_ec[256] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
+ 2, 2, 2, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 2, 1, 4, 5, 1, 1, 6, 1, 1,
+ 1, 7, 8, 8, 9, 8, 10, 11, 12, 13,
+ 13, 13, 13, 13, 13, 13, 13, 14, 1, 1,
+ 1, 1, 8, 8, 15, 15, 15, 15, 15, 15,
+ 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
+ 16, 16, 16, 16, 16, 16, 16, 17, 16, 16,
+ 1, 18, 19, 1, 16, 1, 15, 20, 21, 22,
+
+ 23, 15, 16, 24, 25, 16, 16, 26, 27, 28,
+ 24, 16, 16, 29, 30, 31, 32, 33, 16, 17,
+ 16, 16, 34, 1, 35, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1
+ } ;
+
+static yyconst flex_int32_t yy_meta[36] =
+ { 0,
+ 1, 1, 1, 1, 2, 1, 2, 2, 2, 3,
+ 4, 4, 4, 5, 6, 7, 7, 1, 1, 6,
+ 6, 6, 6, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 8, 1
+ } ;
+
+static yyconst flex_int16_t yy_base[117] =
+ { 0,
+ 0, 0, 30, 0, 44, 0, 67, 0, 97, 105,
+ 302, 303, 35, 44, 40, 94, 112, 0, 129, 152,
+ 296, 295, 159, 0, 176, 303, 0, 116, 95, 165,
+ 49, 46, 102, 303, 296, 0, 0, 288, 290, 293,
+ 264, 266, 270, 0, 0, 303, 0, 303, 264, 303,
+ 0, 0, 195, 101, 0, 0, 0, 0, 284, 125,
+ 277, 265, 225, 230, 216, 218, 0, 202, 224, 221,
+ 217, 107, 196, 188, 303, 206, 179, 186, 178, 185,
+ 183, 162, 161, 150, 169, 160, 145, 125, 303, 303,
+ 137, 109, 190, 103, 203, 167, 108, 197, 303, 123,
+
+ 29, 303, 303, 215, 221, 226, 229, 234, 240, 246,
+ 250, 257, 265, 270, 275, 282
+ } ;
+
+static yyconst flex_int16_t yy_def[117] =
+ { 0,
+ 103, 1, 1, 3, 3, 5, 103, 7, 3, 3,
+ 103, 103, 103, 103, 104, 105, 103, 106, 103, 19,
+ 19, 20, 103, 107, 20, 103, 108, 109, 105, 103,
+ 103, 103, 104, 103, 104, 110, 111, 103, 112, 113,
+ 103, 103, 103, 106, 19, 103, 20, 103, 103, 103,
+ 20, 108, 109, 103, 114, 110, 111, 115, 112, 112,
+ 113, 103, 103, 103, 103, 103, 114, 115, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 116, 103, 116, 103, 116,
+
+ 103, 103, 0, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103
+ } ;
+
+static yyconst flex_int16_t yy_nxt[339] =
+ { 0,
+ 12, 13, 14, 15, 12, 16, 12, 12, 12, 17,
+ 18, 18, 18, 12, 19, 20, 20, 12, 12, 21,
+ 19, 21, 19, 22, 20, 20, 20, 20, 20, 20,
+ 20, 20, 20, 12, 12, 12, 32, 32, 102, 23,
+ 12, 12, 12, 34, 20, 32, 32, 32, 32, 20,
+ 20, 20, 20, 20, 24, 24, 24, 35, 25, 54,
+ 54, 54, 26, 25, 25, 25, 25, 12, 13, 14,
+ 15, 27, 12, 27, 27, 27, 23, 27, 27, 27,
+ 12, 28, 28, 28, 12, 12, 28, 28, 28, 28,
+ 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+
+ 12, 12, 29, 36, 103, 34, 17, 30, 31, 31,
+ 29, 54, 54, 54, 17, 30, 31, 31, 39, 35,
+ 52, 40, 52, 52, 52, 103, 78, 38, 38, 46,
+ 101, 60, 79, 41, 69, 97, 42, 94, 43, 45,
+ 45, 45, 46, 45, 47, 47, 93, 92, 45, 45,
+ 45, 45, 47, 47, 47, 47, 47, 47, 47, 47,
+ 47, 47, 47, 47, 47, 39, 47, 91, 40, 90,
+ 99, 47, 47, 47, 47, 54, 54, 54, 89, 88,
+ 41, 55, 87, 49, 100, 43, 51, 51, 51, 86,
+ 51, 95, 95, 96, 85, 51, 51, 51, 51, 52,
+
+ 99, 52, 52, 52, 95, 95, 96, 84, 46, 83,
+ 82, 81, 39, 79, 100, 33, 33, 33, 33, 33,
+ 33, 33, 33, 37, 80, 77, 37, 37, 37, 44,
+ 40, 44, 50, 76, 50, 52, 75, 52, 74, 52,
+ 52, 53, 73, 53, 53, 53, 53, 56, 56, 56,
+ 72, 56, 56, 57, 71, 57, 57, 59, 59, 59,
+ 59, 59, 59, 59, 59, 61, 61, 61, 61, 61,
+ 61, 61, 61, 67, 70, 67, 68, 68, 68, 62,
+ 68, 68, 98, 98, 98, 98, 98, 98, 98, 98,
+ 60, 66, 65, 64, 63, 62, 60, 58, 103, 48,
+
+ 48, 103, 11, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103
+ } ;
+
+static yyconst flex_int16_t yy_chk[339] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 3, 13, 13, 101, 3,
+ 3, 3, 3, 15, 3, 14, 14, 32, 32, 3,
+ 3, 3, 3, 3, 5, 5, 5, 15, 5, 31,
+ 31, 31, 5, 5, 5, 5, 5, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+
+ 7, 7, 9, 16, 29, 33, 9, 9, 9, 9,
+ 10, 54, 54, 54, 10, 10, 10, 10, 17, 33,
+ 28, 17, 28, 28, 28, 100, 72, 16, 29, 28,
+ 97, 60, 72, 17, 60, 94, 17, 92, 17, 19,
+ 19, 19, 19, 19, 19, 19, 91, 88, 19, 19,
+ 19, 19, 19, 19, 19, 19, 19, 19, 19, 19,
+ 19, 19, 20, 20, 20, 23, 20, 87, 23, 86,
+ 96, 20, 20, 20, 20, 30, 30, 30, 85, 84,
+ 23, 30, 83, 23, 96, 23, 25, 25, 25, 82,
+ 25, 93, 93, 93, 81, 25, 25, 25, 25, 53,
+
+ 98, 53, 53, 53, 95, 95, 95, 80, 53, 79,
+ 78, 77, 76, 74, 98, 104, 104, 104, 104, 104,
+ 104, 104, 104, 105, 73, 71, 105, 105, 105, 106,
+ 70, 106, 107, 69, 107, 108, 68, 108, 66, 108,
+ 108, 109, 65, 109, 109, 109, 109, 110, 110, 110,
+ 64, 110, 110, 111, 63, 111, 111, 112, 112, 112,
+ 112, 112, 112, 112, 112, 113, 113, 113, 113, 113,
+ 113, 113, 113, 114, 62, 114, 115, 115, 115, 61,
+ 115, 115, 116, 116, 116, 116, 116, 116, 116, 116,
+ 59, 49, 43, 42, 41, 40, 39, 38, 35, 22,
+
+ 21, 11, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103
+ } ;
+
+/* Table of booleans, true if rule could match eol. */
+static yyconst flex_int32_t yy_rule_can_match_eol[21] =
+ { 0,
+1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
+ 0, };
+
+static yy_state_type yy_last_accepting_state;
+static char *yy_last_accepting_cpos;
+
+extern int yy_flex_debug;
+int yy_flex_debug = 0;
+
+/* The intent behind this definition is that it'll catch
+ * any uses of REJECT which flex missed.
+ */
+#define REJECT reject_used_but_not_detected
+#define yymore() yymore_used_but_not_detected
+#define YY_MORE_ADJ 0
+#define YY_RESTORE_YY_MORE_OFFSET
+char *yytext;
+#line 1 "dtc-lexer.l"
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+
+
+
+#line 37 "dtc-lexer.l"
+#include "dtc.h"
+#include "srcpos.h"
+#include "dtc-parser.tab.h"
+
+
+/*#define LEXDEBUG 1*/
+
+#ifdef LEXDEBUG
+#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
+#else
+#define DPRINT(fmt, ...) do { } while (0)
+#endif
+
+static int dts_version; /* = 0 */
+
+#define BEGIN_DEFAULT() if (dts_version == 0) { \
+ DPRINT("<INITIAL>\n"); \
+ BEGIN(INITIAL); \
+ } else { \
+ DPRINT("<V1>\n"); \
+ BEGIN(V1); \
+ }
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
+#line 638 "dtc-lexer.lex.c"
+
+#define INITIAL 0
+#define INCLUDE 1
+#define BYTESTRING 2
+#define PROPNODENAME 3
+#define V1 4
+
+#ifndef YY_NO_UNISTD_H
+/* Special case for "unistd.h", since it is non-ANSI. We include it way
+ * down here because we want the user's section 1 to have been scanned first.
+ * The user has a chance to override it with an option.
+ */
+#include <unistd.h>
+#endif
+
+#ifndef YY_EXTRA_TYPE
+#define YY_EXTRA_TYPE void *
+#endif
+
+static int yy_init_globals (void );
+
+/* Macros after this point can all be overridden by user definitions in
+ * section 1.
+ */
+
+#ifndef YY_SKIP_YYWRAP
+#ifdef __cplusplus
+extern "C" int yywrap (void );
+#else
+extern int yywrap (void );
+#endif
+#endif
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char *,yyconst char *,int );
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * );
+#endif
+
+#ifndef YY_NO_INPUT
+
+#ifdef __cplusplus
+static int yyinput (void );
+#else
+static int input (void );
+#endif
+
+#endif
+
+/* Amount of stuff to slurp up with each read. */
+#ifndef YY_READ_BUF_SIZE
+#define YY_READ_BUF_SIZE 8192
+#endif
+
+/* Copy whatever the last rule matched to the standard output. */
+#ifndef ECHO
+/* This used to be an fputs(), but since the string might contain NUL's,
+ * we now use fwrite().
+ */
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
+#endif
+
+/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
+ * is returned in "result".
+ */
+#ifndef YY_INPUT
+#define YY_INPUT(buf,result,max_size) \
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+ { \
+ int c = '*'; \
+ int n; \
+ for ( n = 0; n < max_size && \
+ (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
+ buf[n] = (char) c; \
+ if ( c == '\n' ) \
+ buf[n++] = (char) c; \
+ if ( c == EOF && ferror( yyin ) ) \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ result = n; \
+ } \
+ else \
+ { \
+ errno=0; \
+ while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
+ { \
+ if( errno != EINTR) \
+ { \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ break; \
+ } \
+ errno=0; \
+ clearerr(yyin); \
+ } \
+ }\
+\
+
+#endif
+
+/* No semi-colon after return; correct usage is to write "yyterminate();" -
+ * we don't want an extra ';' after the "return" because that will cause
+ * some compilers to complain about unreachable statements.
+ */
+#ifndef yyterminate
+#define yyterminate() return YY_NULL
+#endif
+
+/* Number of entries by which start-condition stack grows. */
+#ifndef YY_START_STACK_INCR
+#define YY_START_STACK_INCR 25
+#endif
+
+/* Report a fatal error. */
+#ifndef YY_FATAL_ERROR
+#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
+#endif
+
+/* end tables serialization structures and prototypes */
+
+/* Default declaration of generated scanner - a define so the user can
+ * easily add parameters.
+ */
+#ifndef YY_DECL
+#define YY_DECL_IS_OURS 1
+
+extern int yylex (void);
+
+#define YY_DECL int yylex (void)
+#endif /* !YY_DECL */
+
+/* Code executed at the beginning of each rule, after yytext and yyleng
+ * have been set up.
+ */
+#ifndef YY_USER_ACTION
+#define YY_USER_ACTION
+#endif
+
+/* Code executed at the end of each rule. */
+#ifndef YY_BREAK
+#define YY_BREAK break;
+#endif
+
+#define YY_RULE_SETUP \
+ YY_USER_ACTION
+
+/** The main scanner function which does all the work.
+ */
+YY_DECL
+{
+ register yy_state_type yy_current_state;
+ register char *yy_cp, *yy_bp;
+ register int yy_act;
+
+#line 64 "dtc-lexer.l"
+
+#line 795 "dtc-lexer.lex.c"
+
+ if ( !(yy_init) )
+ {
+ (yy_init) = 1;
+
+#ifdef YY_USER_INIT
+ YY_USER_INIT;
+#endif
+
+ if ( ! (yy_start) )
+ (yy_start) = 1; /* first start state */
+
+ if ( ! yyin )
+ yyin = stdin;
+
+ if ( ! yyout )
+ yyout = stdout;
+
+ if ( ! YY_CURRENT_BUFFER ) {
+ yyensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
+ yy_load_buffer_state( );
+ }
+
+ while ( 1 ) /* loops until end-of-file is reached */
+ {
+ yy_cp = (yy_c_buf_p);
+
+ /* Support of yytext. */
+ *yy_cp = (yy_hold_char);
+
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
+
+ yy_current_state = (yy_start);
+yy_match:
+ do
+ {
+ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 104 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ ++yy_cp;
+ }
+ while ( yy_base[yy_current_state] != 303 );
+
+yy_find_action:
+ yy_act = yy_accept[yy_current_state];
+ if ( yy_act == 0 )
+ { /* have to back up */
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ yy_act = yy_accept[yy_current_state];
+ }
+
+ YY_DO_BEFORE_ACTION;
+
+ if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
+ {
+ int yyl;
+ for ( yyl = 0; yyl < yyleng; ++yyl )
+ if ( yytext[yyl] == '\n' )
+
+ yylineno++;
+;
+ }
+
+do_action: /* This label is used only to access EOF actions. */
+
+ switch ( yy_act )
+ { /* beginning of action switch */
+ case 0: /* must back up */
+ /* undo the effects of YY_DO_BEFORE_ACTION */
+ *yy_cp = (yy_hold_char);
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ goto yy_find_action;
+
+case 1:
+/* rule 1 can match eol */
+YY_RULE_SETUP
+#line 65 "dtc-lexer.l"
+{
+ char *name = strchr(yytext, '\"') + 1;
+ yytext[yyleng-1] = '\0';
+ push_input_file(name);
+ }
+ YY_BREAK
+case YY_STATE_EOF(INITIAL):
+case YY_STATE_EOF(INCLUDE):
+case YY_STATE_EOF(BYTESTRING):
+case YY_STATE_EOF(PROPNODENAME):
+case YY_STATE_EOF(V1):
+#line 71 "dtc-lexer.l"
+{
+ if (!pop_input_file()) {
+ yyterminate();
+ }
+ }
+ YY_BREAK
+case 2:
+/* rule 2 can match eol */
+YY_RULE_SETUP
+#line 77 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("String: %s\n", yytext);
+ yylval.data = data_copy_escape_string(yytext+1,
+ yyleng-2);
+ yylloc.first_line = yylineno;
+ return DT_STRING;
+ }
+ YY_BREAK
+case 3:
+YY_RULE_SETUP
+#line 87 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /dts-v1/\n");
+ dts_version = 1;
+ BEGIN_DEFAULT();
+ return DT_V1;
+ }
+ YY_BREAK
+case 4:
+YY_RULE_SETUP
+#line 96 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /memreserve/\n");
+ BEGIN_DEFAULT();
+ return DT_MEMRESERVE;
+ }
+ YY_BREAK
+case 5:
+YY_RULE_SETUP
+#line 104 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Label: %s\n", yytext);
+ yylval.labelref = strdup(yytext);
+ yylval.labelref[yyleng-1] = '\0';
+ return DT_LABEL;
+ }
+ YY_BREAK
+case 6:
+YY_RULE_SETUP
+#line 113 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ if (*yytext == 'b')
+ yylval.cbase = 2;
+ else if (*yytext == 'o')
+ yylval.cbase = 8;
+ else if (*yytext == 'd')
+ yylval.cbase = 10;
+ else
+ yylval.cbase = 16;
+ DPRINT("Base: %d\n", yylval.cbase);
+ return DT_BASE;
+ }
+ YY_BREAK
+case 7:
+YY_RULE_SETUP
+#line 128 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LEGACYLITERAL;
+ }
+ YY_BREAK
+case 8:
+YY_RULE_SETUP
+#line 136 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LITERAL;
+ }
+ YY_BREAK
+case 9:
+YY_RULE_SETUP
+#line 144 "dtc-lexer.l"
+{ /* label reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+ YY_BREAK
+case 10:
+YY_RULE_SETUP
+#line 152 "dtc-lexer.l"
+{ /* new-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yytext[yyleng-1] = '\0';
+ DPRINT("Ref: %s\n", yytext+2);
+ yylval.labelref = strdup(yytext+2);
+ return DT_REF;
+ }
+ YY_BREAK
+case 11:
+YY_RULE_SETUP
+#line 161 "dtc-lexer.l"
+{ /* old-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+ YY_BREAK
+case 12:
+YY_RULE_SETUP
+#line 169 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.byte = strtol(yytext, NULL, 16);
+ DPRINT("Byte: %02x\n", (int)yylval.byte);
+ return DT_BYTE;
+ }
+ YY_BREAK
+case 13:
+YY_RULE_SETUP
+#line 177 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("/BYTESTRING\n");
+ BEGIN_DEFAULT();
+ return ']';
+ }
+ YY_BREAK
+case 14:
+YY_RULE_SETUP
+#line 185 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("PropNodeName: %s\n", yytext);
+ yylval.propnodename = strdup(yytext);
+ BEGIN_DEFAULT();
+ return DT_PROPNODENAME;
+ }
+ YY_BREAK
+case 15:
+YY_RULE_SETUP
+#line 194 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Binary Include\n");
+ return DT_INCBIN;
+ }
+ YY_BREAK
+case 16:
+/* rule 16 can match eol */
+YY_RULE_SETUP
+#line 201 "dtc-lexer.l"
+/* eat whitespace */
+ YY_BREAK
+case 17:
+/* rule 17 can match eol */
+YY_RULE_SETUP
+#line 202 "dtc-lexer.l"
+/* eat C-style comments */
+ YY_BREAK
+case 18:
+/* rule 18 can match eol */
+YY_RULE_SETUP
+#line 203 "dtc-lexer.l"
+/* eat C++-style comments */
+ YY_BREAK
+case 19:
+YY_RULE_SETUP
+#line 205 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Char: %c (\\x%02x)\n", yytext[0],
+ (unsigned)yytext[0]);
+ if (yytext[0] == '[') {
+ DPRINT("<BYTESTRING>\n");
+ BEGIN(BYTESTRING);
+ }
+ if ((yytext[0] == '{')
+ || (yytext[0] == ';')) {
+ DPRINT("<PROPNODENAME>\n");
+ BEGIN(PROPNODENAME);
+ }
+ return yytext[0];
+ }
+ YY_BREAK
+case 20:
+YY_RULE_SETUP
+#line 222 "dtc-lexer.l"
+ECHO;
+ YY_BREAK
+#line 1120 "dtc-lexer.lex.c"
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed yyin at a new source and called
+ * yylex(). If so, then we have to assure
+ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+ * of the first EOB in the buffer, since yy_c_buf_p will
+ * already have been incremented past the NUL character
+ * (since all states make transitions on EOB to the
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+ * yy_get_previous_state() go ahead and do it
+ * for us because it doesn't know how to deal
+ * with the possibility of jamming (and we don't
+ * want to build jamming into it because then it
+ * will run more slowly).
+ */
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+ (yy_did_buffer_switch_on_eof) = 0;
+
+ if ( yywrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+ * yytext, we can now set up
+ * yy_c_buf_p so that if some total
+ * hoser (like flex itself) wants to
+ * call the scanner after we return the
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+ }
+
+ else
+ {
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) =
+ (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+ (yy_c_buf_p) =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+ }
+
+ default:
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
+} /* end of yylex */
+
+/* yy_get_next_buffer - try to read in a new buffer
+ *
+ * Returns a code representing an action:
+ * EOB_ACT_LAST_MATCH -
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
+ */
+static int yy_get_next_buffer (void)
+{
+ register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ register char *source = (yytext_ptr);
+ register int number_to_move, i;
+ int ret_val;
+
+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+ */
+ return EOB_ACT_END_OF_FILE;
+ }
+
+ else
+ {
+ /* We matched some text prior to the EOB, first
+ * process it.
+ */
+ return EOB_ACT_LAST_MATCH;
+ }
+ }
+
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+ int num_to_read =
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+
+ /* just a shorter name for the current buffer */
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+
+ int yy_c_buf_p_offset =
+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+ int new_size = b->yy_buf_size * 2;
+
+ if ( new_size <= 0 )
+ b->yy_buf_size += b->yy_buf_size / 8;
+ else
+ b->yy_buf_size *= 2;
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+ yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+ b->yy_ch_buf = 0;
+
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
+
+ /* Read in more data. */
+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+ (yy_n_chars), (size_t) num_to_read );
+
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+ yyrestart(yyin );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+ if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
+ (yy_n_chars) += number_to_move;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+ return ret_val;
+}
+
+/* yy_get_previous_state - get the state just before the EOB char was reached */
+
+ static yy_state_type yy_get_previous_state (void)
+{
+ register yy_state_type yy_current_state;
+ register char *yy_cp;
+
+ yy_current_state = (yy_start);
+
+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 104 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ }
+
+ return yy_current_state;
+}
+
+/* yy_try_NUL_trans - try to make a transition on the NUL character
+ *
+ * synopsis
+ * next_state = yy_try_NUL_trans( current_state );
+ */
+ static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
+{
+ register int yy_is_jam;
+ register char *yy_cp = (yy_c_buf_p);
+
+ register YY_CHAR yy_c = 1;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 104 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_is_jam = (yy_current_state == 103);
+
+ return yy_is_jam ? 0 : yy_current_state;
+}
+
+#ifndef YY_NO_INPUT
+#ifdef __cplusplus
+ static int yyinput (void)
+#else
+ static int input (void)
+#endif
+
+{
+ int c;
+
+ *(yy_c_buf_p) = (yy_hold_char);
+
+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+ int offset = (yy_c_buf_p) - (yytext_ptr);
+ ++(yy_c_buf_p);
+
+ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+ * sees that we've accumulated a
+ * token and flags that we need to
+ * try matching the token before
+ * proceeding. But for input(),
+ * there's no matching to consider.
+ * So convert the EOB_ACT_LAST_MATCH
+ * to EOB_ACT_END_OF_FILE.
+ */
+
+ /* Reset buffer status. */
+ yyrestart(yyin );
+
+ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+ if ( yywrap( ) )
+ return EOF;
+
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+#ifdef __cplusplus
+ return yyinput();
+#else
+ return input();
+#endif
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
+
+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
+ *(yy_c_buf_p) = '\0'; /* preserve yytext */
+ (yy_hold_char) = *++(yy_c_buf_p);
+
+ if ( c == '\n' )
+
+ yylineno++;
+;
+
+ return c;
+}
+#endif /* ifndef YY_NO_INPUT */
+
+/** Immediately switch to a different input stream.
+ * @param input_file A readable stream.
+ *
+ * @note This function does not reset the start condition to @c INITIAL .
+ */
+ void yyrestart (FILE * input_file )
+{
+
+ if ( ! YY_CURRENT_BUFFER ){
+ yyensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
+ yy_init_buffer(YY_CURRENT_BUFFER,input_file );
+ yy_load_buffer_state( );
+}
+
+/** Switch to a different input buffer.
+ * @param new_buffer The new input buffer.
+ *
+ */
+ void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
+{
+
+ /* TODO. We should be able to replace this entire function body
+ * with
+ * yypop_buffer_state();
+ * yypush_buffer_state(new_buffer);
+ */
+ yyensure_buffer_stack ();
+ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ yy_load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (yywrap()) processing, but the only time this flag
+ * is looked at is after yywrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+static void yy_load_buffer_state (void)
+{
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+ yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+ (yy_hold_char) = *(yy_c_buf_p);
+}
+
+/** Allocate and initialize an input buffer state.
+ * @param file A readable stream.
+ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
+ *
+ * @return the allocated buffer state.
+ */
+ YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
+{
+ YY_BUFFER_STATE b;
+
+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_buf_size = size;
+
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+ b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_is_our_buffer = 1;
+
+ yy_init_buffer(b,file );
+
+ return b;
+}
+
+/** Destroy the buffer.
+ * @param b a buffer created with yy_create_buffer()
+ *
+ */
+ void yy_delete_buffer (YY_BUFFER_STATE b )
+{
+
+ if ( ! b )
+ return;
+
+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+
+ if ( b->yy_is_our_buffer )
+ yyfree((void *) b->yy_ch_buf );
+
+ yyfree((void *) b );
+}
+
+#ifndef __cplusplus
+extern int isatty (int );
+#endif /* __cplusplus */
+
+/* Initializes or reinitializes a buffer.
+ * This function is sometimes called more than once on the same buffer,
+ * such as during a yyrestart() or at EOF.
+ */
+ static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
+
+{
+ int oerrno = errno;
+
+ yy_flush_buffer(b );
+
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
+
+ /* If b is the current buffer, then yy_init_buffer was _probably_
+ * called from yyrestart() or through yy_get_next_buffer.
+ * In that case, we don't want to reset the lineno or column.
+ */
+ if (b != YY_CURRENT_BUFFER){
+ b->yy_bs_lineno = 1;
+ b->yy_bs_column = 0;
+ }
+
+ b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
+
+ errno = oerrno;
+}
+
+/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
+ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
+ *
+ */
+ void yy_flush_buffer (YY_BUFFER_STATE b )
+{
+ if ( ! b )
+ return;
+
+ b->yy_n_chars = 0;
+
+ /* We always need two end-of-buffer characters. The first causes
+ * a transition to the end-of-buffer state. The second causes
+ * a jam in that state.
+ */
+ b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+ b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+
+ b->yy_buf_pos = &b->yy_ch_buf[0];
+
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ if ( b == YY_CURRENT_BUFFER )
+ yy_load_buffer_state( );
+}
+
+/** Pushes the new state onto the stack. The new state becomes
+ * the current state. This function will allocate the stack
+ * if necessary.
+ * @param new_buffer The new state.
+ *
+ */
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
+{
+ if (new_buffer == NULL)
+ return;
+
+ yyensure_buffer_stack();
+
+ /* This block is copied from yy_switch_to_buffer. */
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ /* Only push if top exists. Otherwise, replace top. */
+ if (YY_CURRENT_BUFFER)
+ (yy_buffer_stack_top)++;
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+
+ /* copied from yy_switch_to_buffer. */
+ yy_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+/** Removes and deletes the top of the stack, if present.
+ * The next element becomes the new top.
+ *
+ */
+void yypop_buffer_state (void)
+{
+ if (!YY_CURRENT_BUFFER)
+ return;
+
+ yy_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ if ((yy_buffer_stack_top) > 0)
+ --(yy_buffer_stack_top);
+
+ if (YY_CURRENT_BUFFER) {
+ yy_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+ }
+}
+
+/* Allocates the stack if it does not exist.
+ * Guarantees space for at least one push.
+ */
+static void yyensure_buffer_stack (void)
+{
+ int num_to_alloc;
+
+ if (!(yy_buffer_stack)) {
+
+ /* First allocation is just for 2 elements, since we don't know if this
+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
+ * immediate realloc on the next call.
+ */
+ num_to_alloc = 1;
+ (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
+ (num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+
+ (yy_buffer_stack_max) = num_to_alloc;
+ (yy_buffer_stack_top) = 0;
+ return;
+ }
+
+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+ /* Increase the buffer to prepare for a possible push. */
+ int grow_size = 8 /* arbitrary grow size */;
+
+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
+ (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
+ ((yy_buffer_stack),
+ num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
+ /* zero only the new slots.*/
+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+ (yy_buffer_stack_max) = num_to_alloc;
+ }
+}
+
+/** Setup the input buffer state to scan directly from a user-specified character buffer.
+ * @param base the character buffer
+ * @param size the size in bytes of the character buffer
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
+{
+ YY_BUFFER_STATE b;
+
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
+
+ b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
+ b->yy_buf_pos = b->yy_ch_buf = base;
+ b->yy_is_our_buffer = 0;
+ b->yy_input_file = 0;
+ b->yy_n_chars = b->yy_buf_size;
+ b->yy_is_interactive = 0;
+ b->yy_at_bol = 1;
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ yy_switch_to_buffer(b );
+
+ return b;
+}
+
+/** Setup the input buffer state to scan a string. The next call to yylex() will
+ * scan from a @e copy of @a str.
+ * @param yystr a NUL-terminated string to scan
+ *
+ * @return the newly allocated buffer state object.
+ * @note If you want to scan bytes that may contain NUL values, then use
+ * yy_scan_bytes() instead.
+ */
+YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
+{
+
+ return yy_scan_bytes(yystr,strlen(yystr) );
+}
+
+/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
+ * scan from a @e copy of @a bytes.
+ * @param bytes the byte buffer to scan
+ * @param len the number of bytes in the buffer pointed to by @a bytes.
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
+{
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ int i;
+
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = _yybytes_len + 2;
+ buf = (char *) yyalloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
+
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
+
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+
+ b = yy_scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
+
+ /* It's okay to grow etc. this buffer, and we should throw it
+ * away when we're done.
+ */
+ b->yy_is_our_buffer = 1;
+
+ return b;
+}
+
+#ifndef YY_EXIT_FAILURE
+#define YY_EXIT_FAILURE 2
+#endif
+
+static void yy_fatal_error (yyconst char* msg )
+{
+ (void) fprintf( stderr, "%s\n", msg );
+ exit( YY_EXIT_FAILURE );
+}
+
+/* Redefine yyless() so it works in section 3 code. */
+
+#undef yyless
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ yytext[yyleng] = (yy_hold_char); \
+ (yy_c_buf_p) = yytext + yyless_macro_arg; \
+ (yy_hold_char) = *(yy_c_buf_p); \
+ *(yy_c_buf_p) = '\0'; \
+ yyleng = yyless_macro_arg; \
+ } \
+ while ( 0 )
+
+/* Accessor methods (get/set functions) to struct members. */
+
+/** Get the current line number.
+ *
+ */
+int yyget_lineno (void)
+{
+
+ return yylineno;
+}
+
+/** Get the input stream.
+ *
+ */
+FILE *yyget_in (void)
+{
+ return yyin;
+}
+
+/** Get the output stream.
+ *
+ */
+FILE *yyget_out (void)
+{
+ return yyout;
+}
+
+/** Get the length of the current token.
+ *
+ */
+int yyget_leng (void)
+{
+ return yyleng;
+}
+
+/** Get the current token.
+ *
+ */
+
+char *yyget_text (void)
+{
+ return yytext;
+}
+
+/** Set the current line number.
+ * @param line_number
+ *
+ */
+void yyset_lineno (int line_number )
+{
+
+ yylineno = line_number;
+}
+
+/** Set the input stream. This does not discard the current
+ * input buffer.
+ * @param in_str A readable stream.
+ *
+ * @see yy_switch_to_buffer
+ */
+void yyset_in (FILE * in_str )
+{
+ yyin = in_str ;
+}
+
+void yyset_out (FILE * out_str )
+{
+ yyout = out_str ;
+}
+
+int yyget_debug (void)
+{
+ return yy_flex_debug;
+}
+
+void yyset_debug (int bdebug )
+{
+ yy_flex_debug = bdebug ;
+}
+
+static int yy_init_globals (void)
+{
+ /* Initialization is the same as for the non-reentrant scanner.
+ * This function is called from yylex_destroy(), so don't allocate here.
+ */
+
+ /* We do not touch yylineno unless the option is enabled. */
+ yylineno = 1;
+
+ (yy_buffer_stack) = 0;
+ (yy_buffer_stack_top) = 0;
+ (yy_buffer_stack_max) = 0;
+ (yy_c_buf_p) = (char *) 0;
+ (yy_init) = 0;
+ (yy_start) = 0;
+
+/* Defined in main.c */
+#ifdef YY_STDINIT
+ yyin = stdin;
+ yyout = stdout;
+#else
+ yyin = (FILE *) 0;
+ yyout = (FILE *) 0;
+#endif
+
+ /* For future reference: Set errno on error, since we are called by
+ * yylex_init()
+ */
+ return 0;
+}
+
+/* yylex_destroy is for both reentrant and non-reentrant scanners. */
+int yylex_destroy (void)
+{
+
+ /* Pop the buffer stack, destroying each element. */
+ while(YY_CURRENT_BUFFER){
+ yy_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ yypop_buffer_state();
+ }
+
+ /* Destroy the stack itself. */
+ yyfree((yy_buffer_stack) );
+ (yy_buffer_stack) = NULL;
+
+ /* Reset the globals. This is important in a non-reentrant scanner so the next time
+ * yylex() is called, initialization will occur. */
+ yy_init_globals( );
+
+ return 0;
+}
+
+/*
+ * Internal utility routines.
+ */
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
+{
+ register int i;
+ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
+}
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * s )
+{
+ register int n;
+ for ( n = 0; s[n]; ++n )
+ ;
+
+ return n;
+}
+#endif
+
+void *yyalloc (yy_size_t size )
+{
+ return (void *) malloc( size );
+}
+
+void *yyrealloc (void * ptr, yy_size_t size )
+{
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+ * because both ANSI C and C++ allow castless assignment from
+ * any pointer type to void*, and deal with argument conversions
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
+}
+
+void yyfree (void * ptr )
+{
+ free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
+}
+
+#define YYTABLES_NAME "yytables"
+
+#line 222 "dtc-lexer.l"
+
+
+
+
+/*
+ * Stack of nested include file contexts.
+ */
+
+struct incl_file {
+ struct dtc_file *file;
+ YY_BUFFER_STATE yy_prev_buf;
+ int yy_prev_lineno;
+ struct incl_file *prev;
+};
+
+static struct incl_file *incl_file_stack;
+
+
+/*
+ * Detect infinite include recursion.
+ */
+#define MAX_INCLUDE_DEPTH (100)
+
+static int incl_depth = 0;
+
+
+static void push_input_file(const char *filename)
+{
+ struct incl_file *incl_file;
+ struct dtc_file *newfile;
+ struct search_path search, *searchptr = NULL;
+
+ assert(filename);
+
+ if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+ die("Includes nested too deeply");
+
+ if (srcpos_file) {
+ search.dir = srcpos_file->dir;
+ search.next = NULL;
+ search.prev = NULL;
+ searchptr = &search;
+ }
+
+ newfile = dtc_open_file(filename, searchptr);
+
+ incl_file = xmalloc(sizeof(struct incl_file));
+
+ /*
+ * Save current context.
+ */
+ incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
+ incl_file->yy_prev_lineno = yylineno;
+ incl_file->file = srcpos_file;
+ incl_file->prev = incl_file_stack;
+
+ incl_file_stack = incl_file;
+
+ /*
+ * Establish new context.
+ */
+ srcpos_file = newfile;
+ yylineno = 1;
+ yyin = newfile->file;
+ yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
+}
+
+
+static int pop_input_file(void)
+{
+ struct incl_file *incl_file;
+
+ if (incl_file_stack == 0)
+ return 0;
+
+ dtc_close_file(srcpos_file);
+
+ /*
+ * Pop.
+ */
+ --incl_depth;
+ incl_file = incl_file_stack;
+ incl_file_stack = incl_file->prev;
+
+ /*
+ * Recover old context.
+ */
+ yy_delete_buffer(YY_CURRENT_BUFFER);
+ yy_switch_to_buffer(incl_file->yy_prev_buf);
+ yylineno = incl_file->yy_prev_lineno;
+ srcpos_file = incl_file->file;
+ yyin = incl_file->file ? incl_file->file->file : NULL;
+
+ /*
+ * Free old state.
+ */
+ free(incl_file);
+
+ return 1;
+}
+
--- /dev/null
+/* A Bison parser, made by GNU Bison 2.3. */
+
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
+
+/* As a special exception, you may create a larger work that contains
+ part or all of the Bison parser skeleton and distribute that work
+ under terms of your choice, so long as that work isn't itself a
+ parser generator using the skeleton or a modified version thereof
+ as a parser skeleton. Alternatively, if you modify or redistribute
+ the parser skeleton itself, you may (at your option) remove this
+ special exception, which will cause the skeleton and the resulting
+ Bison output files to be licensed under the GNU General Public
+ License without this special exception.
+
+ This special exception was added by the Free Software Foundation in
+ version 2.2 of Bison. */
+
+/* C LALR(1) parser skeleton written by Richard Stallman, by
+ simplifying the original so-called "semantic" parser. */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+ infringing on user name space. This should be done even for local
+ variables, as they might otherwise be expanded by user macros.
+ There are some unavoidable exceptions within include files to
+ define necessary library symbols; they are noted "INFRINGES ON
+ USER NAME SPACE" below. */
+
+/* Identify Bison output. */
+#define YYBISON 1
+
+/* Bison version. */
+#define YYBISON_VERSION "2.3"
+
+/* Skeleton name. */
+#define YYSKELETON_NAME "yacc.c"
+
+/* Pure parsers. */
+#define YYPURE 0
+
+/* Using locations. */
+#define YYLSP_NEEDED 1
+
+
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ DT_V1 = 258,
+ DT_MEMRESERVE = 259,
+ DT_PROPNODENAME = 260,
+ DT_LITERAL = 261,
+ DT_LEGACYLITERAL = 262,
+ DT_BASE = 263,
+ DT_BYTE = 264,
+ DT_STRING = 265,
+ DT_LABEL = 266,
+ DT_REF = 267,
+ DT_INCBIN = 268
+ };
+#endif
+/* Tokens. */
+#define DT_V1 258
+#define DT_MEMRESERVE 259
+#define DT_PROPNODENAME 260
+#define DT_LITERAL 261
+#define DT_LEGACYLITERAL 262
+#define DT_BASE 263
+#define DT_BYTE 264
+#define DT_STRING 265
+#define DT_LABEL 266
+#define DT_REF 267
+#define DT_INCBIN 268
+
+
+
+
+/* Copy the first part of user declarations. */
+#line 23 "dtc-parser.y"
+
+#include <stdio.h>
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern int yylex(void);
+
+extern struct boot_info *the_boot_info;
+extern int treesource_error;
+
+static unsigned long long eval_literal(const char *s, int base, int bits);
+
+
+/* Enabling traces. */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+
+/* Enabling verbose error messages. */
+#ifdef YYERROR_VERBOSE
+# undef YYERROR_VERBOSE
+# define YYERROR_VERBOSE 1
+#else
+# define YYERROR_VERBOSE 0
+#endif
+
+/* Enabling the token table. */
+#ifndef YYTOKEN_TABLE
+# define YYTOKEN_TABLE 0
+#endif
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+#line 37 "dtc-parser.y"
+{
+ char *propnodename;
+ char *literal;
+ char *labelref;
+ unsigned int cbase;
+ uint8_t byte;
+ struct data data;
+
+ uint64_t addr;
+ cell_t cell;
+ struct property *prop;
+ struct property *proplist;
+ struct node *node;
+ struct node *nodelist;
+ struct reserve_info *re;
+}
+/* Line 187 of yacc.c. */
+#line 153 "dtc-parser.tab.c"
+ YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
+typedef struct YYLTYPE
+{
+ int first_line;
+ int first_column;
+ int last_line;
+ int last_column;
+} YYLTYPE;
+# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
+# define YYLTYPE_IS_DECLARED 1
+# define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+
+/* Copy the second part of user declarations. */
+
+
+/* Line 216 of yacc.c. */
+#line 178 "dtc-parser.tab.c"
+
+#ifdef short
+# undef short
+#endif
+
+#ifdef YYTYPE_UINT8
+typedef YYTYPE_UINT8 yytype_uint8;
+#else
+typedef unsigned char yytype_uint8;
+#endif
+
+#ifdef YYTYPE_INT8
+typedef YYTYPE_INT8 yytype_int8;
+#elif (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+typedef signed char yytype_int8;
+#else
+typedef short int yytype_int8;
+#endif
+
+#ifdef YYTYPE_UINT16
+typedef YYTYPE_UINT16 yytype_uint16;
+#else
+typedef unsigned short int yytype_uint16;
+#endif
+
+#ifdef YYTYPE_INT16
+typedef YYTYPE_INT16 yytype_int16;
+#else
+typedef short int yytype_int16;
+#endif
+
+#ifndef YYSIZE_T
+# ifdef __SIZE_TYPE__
+# define YYSIZE_T __SIZE_TYPE__
+# elif defined size_t
+# define YYSIZE_T size_t
+# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+# define YYSIZE_T size_t
+# else
+# define YYSIZE_T unsigned int
+# endif
+#endif
+
+#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
+
+#ifndef YY_
+# if YYENABLE_NLS
+# if ENABLE_NLS
+# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
+# define YY_(msgid) dgettext ("bison-runtime", msgid)
+# endif
+# endif
+# ifndef YY_
+# define YY_(msgid) msgid
+# endif
+#endif
+
+/* Suppress unused-variable warnings by "using" E. */
+#if ! defined lint || defined __GNUC__
+# define YYUSE(e) ((void) (e))
+#else
+# define YYUSE(e) /* empty */
+#endif
+
+/* Identity function, used to suppress warnings about constant conditions. */
+#ifndef lint
+# define YYID(n) (n)
+#else
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static int
+YYID (int i)
+#else
+static int
+YYID (i)
+ int i;
+#endif
+{
+ return i;
+}
+#endif
+
+#if ! defined yyoverflow || YYERROR_VERBOSE
+
+/* The parser invokes alloca or malloc; define the necessary symbols. */
+
+# ifdef YYSTACK_USE_ALLOCA
+# if YYSTACK_USE_ALLOCA
+# ifdef __GNUC__
+# define YYSTACK_ALLOC __builtin_alloca
+# elif defined __BUILTIN_VA_ARG_INCR
+# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
+# elif defined _AIX
+# define YYSTACK_ALLOC __alloca
+# elif defined _MSC_VER
+# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
+# define alloca _alloca
+# else
+# define YYSTACK_ALLOC alloca
+# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# ifndef _STDLIB_H
+# define _STDLIB_H 1
+# endif
+# endif
+# endif
+# endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+ /* Pacify GCC's `empty if-body' warning. */
+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
+# ifndef YYSTACK_ALLOC_MAXIMUM
+ /* The OS might guarantee only one guard page at the bottom of the stack,
+ and a page size can be as small as 4096 bytes. So we cannot safely
+ invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
+ to allow for a few compiler-allocated temporary stack slots. */
+# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
+# endif
+# else
+# define YYSTACK_ALLOC YYMALLOC
+# define YYSTACK_FREE YYFREE
+# ifndef YYSTACK_ALLOC_MAXIMUM
+# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
+# endif
+# if (defined __cplusplus && ! defined _STDLIB_H \
+ && ! ((defined YYMALLOC || defined malloc) \
+ && (defined YYFREE || defined free)))
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# ifndef _STDLIB_H
+# define _STDLIB_H 1
+# endif
+# endif
+# ifndef YYMALLOC
+# define YYMALLOC malloc
+# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
+# endif
+# endif
+# ifndef YYFREE
+# define YYFREE free
+# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+void free (void *); /* INFRINGES ON USER NAME SPACE */
+# endif
+# endif
+# endif
+#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
+
+
+#if (! defined yyoverflow \
+ && (! defined __cplusplus \
+ || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
+ && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member. */
+union yyalloc
+{
+ yytype_int16 yyss;
+ YYSTYPE yyvs;
+ YYLTYPE yyls;
+};
+
+/* The size of the maximum gap between one aligned stack and the next. */
+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+ N elements. */
+# define YYSTACK_BYTES(N) \
+ ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
+ + 2 * YYSTACK_GAP_MAXIMUM)
+
+/* Copy COUNT objects from FROM to TO. The source and destination do
+ not overlap. */
+# ifndef YYCOPY
+# if defined __GNUC__ && 1 < __GNUC__
+# define YYCOPY(To, From, Count) \
+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+# else
+# define YYCOPY(To, From, Count) \
+ do \
+ { \
+ YYSIZE_T yyi; \
+ for (yyi = 0; yyi < (Count); yyi++) \
+ (To)[yyi] = (From)[yyi]; \
+ } \
+ while (YYID (0))
+# endif
+# endif
+
+/* Relocate STACK from its old location to the new one. The
+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
+ elements in the stack, and YYPTR gives the new location of the
+ stack. Advance YYPTR to a properly aligned location for the next
+ stack. */
+# define YYSTACK_RELOCATE(Stack) \
+ do \
+ { \
+ YYSIZE_T yynewbytes; \
+ YYCOPY (&yyptr->Stack, Stack, yysize); \
+ Stack = &yyptr->Stack; \
+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
+ yyptr += yynewbytes / sizeof (*yyptr); \
+ } \
+ while (YYID (0))
+
+#endif
+
+/* YYFINAL -- State number of the termination state. */
+#define YYFINAL 9
+/* YYLAST -- Last index in YYTABLE. */
+#define YYLAST 73
+
+/* YYNTOKENS -- Number of terminals. */
+#define YYNTOKENS 27
+/* YYNNTS -- Number of nonterminals. */
+#define YYNNTS 20
+/* YYNRULES -- Number of rules. */
+#define YYNRULES 45
+/* YYNRULES -- Number of states. */
+#define YYNSTATES 76
+
+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
+#define YYUNDEFTOK 2
+#define YYMAXUTOK 268
+
+#define YYTRANSLATE(YYX) \
+ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
+
+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
+static const yytype_uint8 yytranslate[] =
+{
+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 24, 26, 2, 2, 25, 15, 2, 16, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 14,
+ 20, 19, 21, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 22, 2, 23, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 17, 2, 18, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
+ 5, 6, 7, 8, 9, 10, 11, 12, 13
+};
+
+#if YYDEBUG
+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
+ YYRHS. */
+static const yytype_uint8 yyprhs[] =
+{
+ 0, 0, 3, 8, 11, 12, 15, 21, 22, 25,
+ 27, 34, 36, 38, 41, 47, 48, 51, 57, 61,
+ 64, 69, 74, 77, 87, 93, 96, 97, 100, 103,
+ 104, 107, 110, 113, 114, 116, 118, 121, 122, 125,
+ 128, 129, 132, 135, 139, 140
+};
+
+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
+static const yytype_int8 yyrhs[] =
+{
+ 28, 0, -1, 3, 14, 29, 34, -1, 31, 34,
+ -1, -1, 30, 29, -1, 46, 4, 33, 33, 14,
+ -1, -1, 32, 31, -1, 30, -1, 46, 4, 33,
+ 15, 33, 14, -1, 6, -1, 7, -1, 16, 35,
+ -1, 17, 36, 44, 18, 14, -1, -1, 36, 37,
+ -1, 46, 5, 19, 38, 14, -1, 46, 5, 14,
+ -1, 39, 10, -1, 39, 20, 40, 21, -1, 39,
+ 22, 43, 23, -1, 39, 12, -1, 39, 13, 24,
+ 10, 25, 33, 25, 33, 26, -1, 39, 13, 24,
+ 10, 26, -1, 38, 11, -1, -1, 38, 25, -1,
+ 39, 11, -1, -1, 40, 42, -1, 40, 12, -1,
+ 40, 11, -1, -1, 8, -1, 6, -1, 41, 7,
+ -1, -1, 43, 9, -1, 43, 11, -1, -1, 45,
+ 44, -1, 45, 37, -1, 46, 5, 35, -1, -1,
+ 11, -1
+};
+
+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
+static const yytype_uint16 yyrline[] =
+{
+ 0, 89, 89, 93, 101, 104, 111, 119, 122, 129,
+ 133, 140, 144, 151, 158, 166, 169, 176, 180, 187,
+ 191, 195, 199, 203, 220, 231, 239, 242, 246, 254,
+ 257, 261, 266, 274, 277, 281, 285, 293, 296, 300,
+ 308, 311, 315, 323, 331, 334
+};
+#endif
+
+#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
+/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
+ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
+static const char *const yytname[] =
+{
+ "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
+ "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
+ "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
+ "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
+ "')'", "$accept", "sourcefile", "memreserves", "memreserve",
+ "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
+ "proplist", "propdef", "propdata", "propdataprefix", "celllist",
+ "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
+};
+#endif
+
+# ifdef YYPRINT
+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
+ token YYLEX-NUM. */
+static const yytype_uint16 yytoknum[] =
+{
+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
+ 265, 266, 267, 268, 59, 45, 47, 123, 125, 61,
+ 60, 62, 91, 93, 40, 44, 41
+};
+# endif
+
+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
+static const yytype_uint8 yyr1[] =
+{
+ 0, 27, 28, 28, 29, 29, 30, 31, 31, 32,
+ 32, 33, 33, 34, 35, 36, 36, 37, 37, 38,
+ 38, 38, 38, 38, 38, 38, 39, 39, 39, 40,
+ 40, 40, 40, 41, 41, 42, 42, 43, 43, 43,
+ 44, 44, 44, 45, 46, 46
+};
+
+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
+static const yytype_uint8 yyr2[] =
+{
+ 0, 2, 4, 2, 0, 2, 5, 0, 2, 1,
+ 6, 1, 1, 2, 5, 0, 2, 5, 3, 2,
+ 4, 4, 2, 9, 5, 2, 0, 2, 2, 0,
+ 2, 2, 2, 0, 1, 1, 2, 0, 2, 2,
+ 0, 2, 2, 3, 0, 1
+};
+
+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
+ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
+ means the default is an error. */
+static const yytype_uint8 yydefact[] =
+{
+ 7, 0, 45, 0, 9, 0, 7, 0, 4, 1,
+ 0, 3, 8, 0, 0, 4, 0, 15, 13, 11,
+ 12, 0, 2, 5, 0, 40, 0, 0, 0, 16,
+ 0, 40, 0, 0, 6, 0, 42, 41, 0, 10,
+ 14, 18, 26, 43, 0, 0, 25, 17, 27, 19,
+ 28, 22, 0, 29, 37, 0, 33, 0, 0, 35,
+ 34, 32, 31, 20, 0, 30, 38, 39, 21, 0,
+ 24, 36, 0, 0, 0, 23
+};
+
+/* YYDEFGOTO[NTERM-NUM]. */
+static const yytype_int8 yydefgoto[] =
+{
+ -1, 3, 14, 4, 5, 6, 27, 11, 18, 25,
+ 29, 44, 45, 56, 64, 65, 57, 30, 31, 7
+};
+
+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
+ STATE-NUM. */
+#define YYPACT_NINF -14
+static const yytype_int8 yypact[] =
+{
+ 30, -11, -14, 7, -14, -1, 27, 13, 27, -14,
+ 8, -14, -14, 40, -1, 27, 35, -14, -14, -14,
+ -14, 21, -14, -14, 40, 24, 40, 28, 40, -14,
+ 32, 24, 46, 38, -14, 39, -14, -14, 26, -14,
+ -14, -14, -14, -14, -9, 10, -14, -14, -14, -14,
+ -14, -14, 31, -14, -14, 44, -2, 3, 23, -14,
+ -14, -14, -14, -14, 50, -14, -14, -14, -14, 40,
+ -14, -14, 33, 40, 36, -14
+};
+
+/* YYPGOTO[NTERM-NUM]. */
+static const yytype_int8 yypgoto[] =
+{
+ -14, -14, 48, 29, 53, -14, -13, 47, 34, -14,
+ 37, -14, -14, -14, -14, -14, -14, 42, -14, -7
+};
+
+/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
+ positive, shift that token. If negative, reduce the rule which
+ number is the opposite. If zero, do what YYDEFACT says.
+ If YYTABLE_NINF, syntax error. */
+#define YYTABLE_NINF -45
+static const yytype_int8 yytable[] =
+{
+ 21, 16, 46, 8, 59, 47, 60, 9, 16, 61,
+ 62, 28, 66, 33, 67, 10, 48, 13, 32, 63,
+ 49, 50, 51, 52, 32, 17, 68, 19, 20, -44,
+ 53, -44, 54, 1, -44, 2, 26, 15, 2, 24,
+ 41, 2, 34, 17, 15, 42, 19, 20, 69, 70,
+ 35, 38, 39, 40, 58, 55, 72, 71, 73, 12,
+ 74, 22, 75, 23, 0, 0, 0, 0, 36, 0,
+ 0, 0, 43, 37
+};
+
+static const yytype_int8 yycheck[] =
+{
+ 13, 8, 11, 14, 6, 14, 8, 0, 15, 11,
+ 12, 24, 9, 26, 11, 16, 25, 4, 25, 21,
+ 10, 11, 12, 13, 31, 17, 23, 6, 7, 5,
+ 20, 4, 22, 3, 4, 11, 15, 8, 11, 4,
+ 14, 11, 14, 17, 15, 19, 6, 7, 25, 26,
+ 18, 5, 14, 14, 10, 24, 69, 7, 25, 6,
+ 73, 14, 26, 15, -1, -1, -1, -1, 31, -1,
+ -1, -1, 38, 31
+};
+
+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
+ symbol of state STATE-NUM. */
+static const yytype_uint8 yystos[] =
+{
+ 0, 3, 11, 28, 30, 31, 32, 46, 14, 0,
+ 16, 34, 31, 4, 29, 30, 46, 17, 35, 6,
+ 7, 33, 34, 29, 4, 36, 15, 33, 33, 37,
+ 44, 45, 46, 33, 14, 18, 37, 44, 5, 14,
+ 14, 14, 19, 35, 38, 39, 11, 14, 25, 10,
+ 11, 12, 13, 20, 22, 24, 40, 43, 10, 6,
+ 8, 11, 12, 21, 41, 42, 9, 11, 23, 25,
+ 26, 7, 33, 25, 33, 26
+};
+
+#define yyerrok (yyerrstatus = 0)
+#define yyclearin (yychar = YYEMPTY)
+#define YYEMPTY (-2)
+#define YYEOF 0
+
+#define YYACCEPT goto yyacceptlab
+#define YYABORT goto yyabortlab
+#define YYERROR goto yyerrorlab
+
+
+/* Like YYERROR except do call yyerror. This remains here temporarily
+ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
+
+#define YYFAIL goto yyerrlab
+
+#define YYRECOVERING() (!!yyerrstatus)
+
+#define YYBACKUP(Token, Value) \
+do \
+ if (yychar == YYEMPTY && yylen == 1) \
+ { \
+ yychar = (Token); \
+ yylval = (Value); \
+ yytoken = YYTRANSLATE (yychar); \
+ YYPOPSTACK (1); \
+ goto yybackup; \
+ } \
+ else \
+ { \
+ yyerror (YY_("syntax error: cannot back up")); \
+ YYERROR; \
+ } \
+while (YYID (0))
+
+
+#define YYTERROR 1
+#define YYERRCODE 256
+
+
+/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
+ If N is 0, then set CURRENT to the empty location which ends
+ the previous symbol: RHS[0] (always defined). */
+
+#define YYRHSLOC(Rhs, K) ((Rhs)[K])
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (YYID (N)) \
+ { \
+ (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
+ (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
+ (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
+ (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
+ } \
+ else \
+ { \
+ (Current).first_line = (Current).last_line = \
+ YYRHSLOC (Rhs, 0).last_line; \
+ (Current).first_column = (Current).last_column = \
+ YYRHSLOC (Rhs, 0).last_column; \
+ } \
+ while (YYID (0))
+#endif
+
+
+/* YY_LOCATION_PRINT -- Print the location on the stream.
+ This macro was not mandated originally: define only if we know
+ we won't break user code: when these are the locations we know. */
+
+#ifndef YY_LOCATION_PRINT
+# if YYLTYPE_IS_TRIVIAL
+# define YY_LOCATION_PRINT(File, Loc) \
+ fprintf (File, "%d.%d-%d.%d", \
+ (Loc).first_line, (Loc).first_column, \
+ (Loc).last_line, (Loc).last_column)
+# else
+# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
+# endif
+#endif
+
+
+/* YYLEX -- calling `yylex' with the right arguments. */
+
+#ifdef YYLEX_PARAM
+# define YYLEX yylex (YYLEX_PARAM)
+#else
+# define YYLEX yylex ()
+#endif
+
+/* Enable debugging if requested. */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+# define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args) \
+do { \
+ if (yydebug) \
+ YYFPRINTF Args; \
+} while (YYID (0))
+
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
+do { \
+ if (yydebug) \
+ { \
+ YYFPRINTF (stderr, "%s ", Title); \
+ yy_symbol_print (stderr, \
+ Type, Value, Location); \
+ YYFPRINTF (stderr, "\n"); \
+ } \
+} while (YYID (0))
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT. |
+`--------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+#else
+static void
+yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
+ FILE *yyoutput;
+ int yytype;
+ YYSTYPE const * const yyvaluep;
+ YYLTYPE const * const yylocationp;
+#endif
+{
+ if (!yyvaluep)
+ return;
+ YYUSE (yylocationp);
+# ifdef YYPRINT
+ if (yytype < YYNTOKENS)
+ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
+# else
+ YYUSE (yyoutput);
+# endif
+ switch (yytype)
+ {
+ default:
+ break;
+ }
+}
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT. |
+`--------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+#else
+static void
+yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
+ FILE *yyoutput;
+ int yytype;
+ YYSTYPE const * const yyvaluep;
+ YYLTYPE const * const yylocationp;
+#endif
+{
+ if (yytype < YYNTOKENS)
+ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
+ else
+ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+ YY_LOCATION_PRINT (yyoutput, *yylocationp);
+ YYFPRINTF (yyoutput, ": ");
+ yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
+ YYFPRINTF (yyoutput, ")");
+}
+
+/*------------------------------------------------------------------.
+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
+| TOP (included). |
+`------------------------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+#else
+static void
+yy_stack_print (bottom, top)
+ yytype_int16 *bottom;
+ yytype_int16 *top;
+#endif
+{
+ YYFPRINTF (stderr, "Stack now");
+ for (; bottom <= top; ++bottom)
+ YYFPRINTF (stderr, " %d", *bottom);
+ YYFPRINTF (stderr, "\n");
+}
+
+# define YY_STACK_PRINT(Bottom, Top) \
+do { \
+ if (yydebug) \
+ yy_stack_print ((Bottom), (Top)); \
+} while (YYID (0))
+
+
+/*------------------------------------------------.
+| Report that the YYRULE is going to be reduced. |
+`------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
+#else
+static void
+yy_reduce_print (yyvsp, yylsp, yyrule)
+ YYSTYPE *yyvsp;
+ YYLTYPE *yylsp;
+ int yyrule;
+#endif
+{
+ int yynrhs = yyr2[yyrule];
+ int yyi;
+ unsigned long int yylno = yyrline[yyrule];
+ YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
+ yyrule - 1, yylno);
+ /* The symbols being reduced. */
+ for (yyi = 0; yyi < yynrhs; yyi++)
+ {
+ fprintf (stderr, " $%d = ", yyi + 1);
+ yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
+ &(yyvsp[(yyi + 1) - (yynrhs)])
+ , &(yylsp[(yyi + 1) - (yynrhs)]) );
+ fprintf (stderr, "\n");
+ }
+}
+
+# define YY_REDUCE_PRINT(Rule) \
+do { \
+ if (yydebug) \
+ yy_reduce_print (yyvsp, yylsp, Rule); \
+} while (YYID (0))
+
+/* Nonzero means print parse trace. It is left uninitialized so that
+ multiple parsers can coexist. */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args)
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
+# define YY_STACK_PRINT(Bottom, Top)
+# define YY_REDUCE_PRINT(Rule)
+#endif /* !YYDEBUG */
+
+
+/* YYINITDEPTH -- initial size of the parser's stacks. */
+#ifndef YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+ if the built-in stack extension method is used).
+
+ Do not make this value too large; the results are undefined if
+ YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
+ evaluated with infinite-precision integer arithmetic. */
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+
+\f
+
+#if YYERROR_VERBOSE
+
+# ifndef yystrlen
+# if defined __GLIBC__ && defined _STRING_H
+# define yystrlen strlen
+# else
+/* Return the length of YYSTR. */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static YYSIZE_T
+yystrlen (const char *yystr)
+#else
+static YYSIZE_T
+yystrlen (yystr)
+ const char *yystr;
+#endif
+{
+ YYSIZE_T yylen;
+ for (yylen = 0; yystr[yylen]; yylen++)
+ continue;
+ return yylen;
+}
+# endif
+# endif
+
+# ifndef yystpcpy
+# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
+# define yystpcpy stpcpy
+# else
+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
+ YYDEST. */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static char *
+yystpcpy (char *yydest, const char *yysrc)
+#else
+static char *
+yystpcpy (yydest, yysrc)
+ char *yydest;
+ const char *yysrc;
+#endif
+{
+ char *yyd = yydest;
+ const char *yys = yysrc;
+
+ while ((*yyd++ = *yys++) != '\0')
+ continue;
+
+ return yyd - 1;
+}
+# endif
+# endif
+
+# ifndef yytnamerr
+/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
+ quotes and backslashes, so that it's suitable for yyerror. The
+ heuristic is that double-quoting is unnecessary unless the string
+ contains an apostrophe, a comma, or backslash (other than
+ backslash-backslash). YYSTR is taken from yytname. If YYRES is
+ null, do not copy; instead, return the length of what the result
+ would have been. */
+static YYSIZE_T
+yytnamerr (char *yyres, const char *yystr)
+{
+ if (*yystr == '"')
+ {
+ YYSIZE_T yyn = 0;
+ char const *yyp = yystr;
+
+ for (;;)
+ switch (*++yyp)
+ {
+ case '\'':
+ case ',':
+ goto do_not_strip_quotes;
+
+ case '\\':
+ if (*++yyp != '\\')
+ goto do_not_strip_quotes;
+ /* Fall through. */
+ default:
+ if (yyres)
+ yyres[yyn] = *yyp;
+ yyn++;
+ break;
+
+ case '"':
+ if (yyres)
+ yyres[yyn] = '\0';
+ return yyn;
+ }
+ do_not_strip_quotes: ;
+ }
+
+ if (! yyres)
+ return yystrlen (yystr);
+
+ return yystpcpy (yyres, yystr) - yyres;
+}
+# endif
+
+/* Copy into YYRESULT an error message about the unexpected token
+ YYCHAR while in state YYSTATE. Return the number of bytes copied,
+ including the terminating null byte. If YYRESULT is null, do not
+ copy anything; just return the number of bytes that would be
+ copied. As a special case, return 0 if an ordinary "syntax error"
+ message will do. Return YYSIZE_MAXIMUM if overflow occurs during
+ size calculation. */
+static YYSIZE_T
+yysyntax_error (char *yyresult, int yystate, int yychar)
+{
+ int yyn = yypact[yystate];
+
+ if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
+ return 0;
+ else
+ {
+ int yytype = YYTRANSLATE (yychar);
+ YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
+ YYSIZE_T yysize = yysize0;
+ YYSIZE_T yysize1;
+ int yysize_overflow = 0;
+ enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
+ char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
+ int yyx;
+
+# if 0
+ /* This is so xgettext sees the translatable formats that are
+ constructed on the fly. */
+ YY_("syntax error, unexpected %s");
+ YY_("syntax error, unexpected %s, expecting %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s or %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
+# endif
+ char *yyfmt;
+ char const *yyf;
+ static char const yyunexpected[] = "syntax error, unexpected %s";
+ static char const yyexpecting[] = ", expecting %s";
+ static char const yyor[] = " or %s";
+ char yyformat[sizeof yyunexpected
+ + sizeof yyexpecting - 1
+ + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
+ * (sizeof yyor - 1))];
+ char const *yyprefix = yyexpecting;
+
+ /* Start YYX at -YYN if negative to avoid negative indexes in
+ YYCHECK. */
+ int yyxbegin = yyn < 0 ? -yyn : 0;
+
+ /* Stay within bounds of both yycheck and yytname. */
+ int yychecklim = YYLAST - yyn + 1;
+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+ int yycount = 1;
+
+ yyarg[0] = yytname[yytype];
+ yyfmt = yystpcpy (yyformat, yyunexpected);
+
+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+ {
+ if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
+ {
+ yycount = 1;
+ yysize = yysize0;
+ yyformat[sizeof yyunexpected - 1] = '\0';
+ break;
+ }
+ yyarg[yycount++] = yytname[yyx];
+ yysize1 = yysize + yytnamerr (0, yytname[yyx]);
+ yysize_overflow |= (yysize1 < yysize);
+ yysize = yysize1;
+ yyfmt = yystpcpy (yyfmt, yyprefix);
+ yyprefix = yyor;
+ }
+
+ yyf = YY_(yyformat);
+ yysize1 = yysize + yystrlen (yyf);
+ yysize_overflow |= (yysize1 < yysize);
+ yysize = yysize1;
+
+ if (yysize_overflow)
+ return YYSIZE_MAXIMUM;
+
+ if (yyresult)
+ {
+ /* Avoid sprintf, as that infringes on the user's name space.
+ Don't have undefined behavior even if the translation
+ produced a string with the wrong number of "%s"s. */
+ char *yyp = yyresult;
+ int yyi = 0;
+ while ((*yyp = *yyf) != '\0')
+ {
+ if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
+ {
+ yyp += yytnamerr (yyp, yyarg[yyi++]);
+ yyf += 2;
+ }
+ else
+ {
+ yyp++;
+ yyf++;
+ }
+ }
+ }
+ return yysize;
+ }
+}
+#endif /* YYERROR_VERBOSE */
+\f
+
+/*-----------------------------------------------.
+| Release the memory associated to this symbol. |
+`-----------------------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
+#else
+static void
+yydestruct (yymsg, yytype, yyvaluep, yylocationp)
+ const char *yymsg;
+ int yytype;
+ YYSTYPE *yyvaluep;
+ YYLTYPE *yylocationp;
+#endif
+{
+ YYUSE (yyvaluep);
+ YYUSE (yylocationp);
+
+ if (!yymsg)
+ yymsg = "Deleting";
+ YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
+
+ switch (yytype)
+ {
+
+ default:
+ break;
+ }
+}
+\f
+
+/* Prevent warnings from -Wmissing-prototypes. */
+
+#ifdef YYPARSE_PARAM
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void *YYPARSE_PARAM);
+#else
+int yyparse ();
+#endif
+#else /* ! YYPARSE_PARAM */
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void);
+#else
+int yyparse ();
+#endif
+#endif /* ! YYPARSE_PARAM */
+
+
+
+/* The look-ahead symbol. */
+int yychar;
+
+/* The semantic value of the look-ahead symbol. */
+YYSTYPE yylval;
+
+/* Number of syntax errors so far. */
+int yynerrs;
+/* Location data for the look-ahead symbol. */
+YYLTYPE yylloc;
+
+
+
+/*----------.
+| yyparse. |
+`----------*/
+
+#ifdef YYPARSE_PARAM
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void *YYPARSE_PARAM)
+#else
+int
+yyparse (YYPARSE_PARAM)
+ void *YYPARSE_PARAM;
+#endif
+#else /* ! YYPARSE_PARAM */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void)
+#else
+int
+yyparse ()
+
+#endif
+#endif
+{
+
+ int yystate;
+ int yyn;
+ int yyresult;
+ /* Number of tokens to shift before error messages enabled. */
+ int yyerrstatus;
+ /* Look-ahead token as an internal (translated) token number. */
+ int yytoken = 0;
+#if YYERROR_VERBOSE
+ /* Buffer for error messages, and its allocated size. */
+ char yymsgbuf[128];
+ char *yymsg = yymsgbuf;
+ YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+ /* Three stacks and their tools:
+ `yyss': related to states,
+ `yyvs': related to semantic values,
+ `yyls': related to locations.
+
+ Refer to the stacks thru separate pointers, to allow yyoverflow
+ to reallocate them elsewhere. */
+
+ /* The state stack. */
+ yytype_int16 yyssa[YYINITDEPTH];
+ yytype_int16 *yyss = yyssa;
+ yytype_int16 *yyssp;
+
+ /* The semantic value stack. */
+ YYSTYPE yyvsa[YYINITDEPTH];
+ YYSTYPE *yyvs = yyvsa;
+ YYSTYPE *yyvsp;
+
+ /* The location stack. */
+ YYLTYPE yylsa[YYINITDEPTH];
+ YYLTYPE *yyls = yylsa;
+ YYLTYPE *yylsp;
+ /* The locations where the error started and ended. */
+ YYLTYPE yyerror_range[2];
+
+#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
+
+ YYSIZE_T yystacksize = YYINITDEPTH;
+
+ /* The variables used to return semantic value and location from the
+ action routines. */
+ YYSTYPE yyval;
+ YYLTYPE yyloc;
+
+ /* The number of symbols on the RHS of the reduced rule.
+ Keep to zero when no symbol should be popped. */
+ int yylen = 0;
+
+ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+ yynerrs = 0;
+ yychar = YYEMPTY; /* Cause a token to be read. */
+
+ /* Initialize stack pointers.
+ Waste one element of value and location stack
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+ yyssp = yyss;
+ yyvsp = yyvs;
+ yylsp = yyls;
+#if YYLTYPE_IS_TRIVIAL
+ /* Initialize the default location before parsing starts. */
+ yylloc.first_line = yylloc.last_line = 1;
+ yylloc.first_column = yylloc.last_column = 0;
+#endif
+
+ goto yysetstate;
+
+/*------------------------------------------------------------.
+| yynewstate -- Push a new state, which is found in yystate. |
+`------------------------------------------------------------*/
+ yynewstate:
+ /* In all cases, when you get here, the value and location stacks
+ have just been pushed. So pushing a state here evens the stacks. */
+ yyssp++;
+
+ yysetstate:
+ *yyssp = yystate;
+
+ if (yyss + yystacksize - 1 <= yyssp)
+ {
+ /* Get the current used size of the three stacks, in elements. */
+ YYSIZE_T yysize = yyssp - yyss + 1;
+
+#ifdef yyoverflow
+ {
+ /* Give user a chance to reallocate the stack. Use copies of
+ these so that the &'s don't force the real ones into
+ memory. */
+ YYSTYPE *yyvs1 = yyvs;
+ yytype_int16 *yyss1 = yyss;
+ YYLTYPE *yyls1 = yyls;
+
+ /* Each stack pointer address is followed by the size of the
+ data in use in that stack, in bytes. This used to be a
+ conditional around just the two extra args, but that might
+ be undefined if yyoverflow is a macro. */
+ yyoverflow (YY_("memory exhausted"),
+ &yyss1, yysize * sizeof (*yyssp),
+ &yyvs1, yysize * sizeof (*yyvsp),
+ &yyls1, yysize * sizeof (*yylsp),
+ &yystacksize);
+ yyls = yyls1;
+ yyss = yyss1;
+ yyvs = yyvs1;
+ }
+#else /* no yyoverflow */
+# ifndef YYSTACK_RELOCATE
+ goto yyexhaustedlab;
+# else
+ /* Extend the stack our own way. */
+ if (YYMAXDEPTH <= yystacksize)
+ goto yyexhaustedlab;
+ yystacksize *= 2;
+ if (YYMAXDEPTH < yystacksize)
+ yystacksize = YYMAXDEPTH;
+
+ {
+ yytype_int16 *yyss1 = yyss;
+ union yyalloc *yyptr =
+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
+ if (! yyptr)
+ goto yyexhaustedlab;
+ YYSTACK_RELOCATE (yyss);
+ YYSTACK_RELOCATE (yyvs);
+ YYSTACK_RELOCATE (yyls);
+# undef YYSTACK_RELOCATE
+ if (yyss1 != yyssa)
+ YYSTACK_FREE (yyss1);
+ }
+# endif
+#endif /* no yyoverflow */
+
+ yyssp = yyss + yysize - 1;
+ yyvsp = yyvs + yysize - 1;
+ yylsp = yyls + yysize - 1;
+
+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
+ (unsigned long int) yystacksize));
+
+ if (yyss + yystacksize - 1 <= yyssp)
+ YYABORT;
+ }
+
+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+
+/*-----------.
+| yybackup. |
+`-----------*/
+yybackup:
+
+ /* Do appropriate processing given the current state. Read a
+ look-ahead token if we need one and don't already have one. */
+
+ /* First try to decide what to do without reference to look-ahead token. */
+ yyn = yypact[yystate];
+ if (yyn == YYPACT_NINF)
+ goto yydefault;
+
+ /* Not known => get a look-ahead token if don't already have one. */
+
+ /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
+ if (yychar == YYEMPTY)
+ {
+ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+ if (yychar <= YYEOF)
+ {
+ yychar = yytoken = YYEOF;
+ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+ yytoken = YYTRANSLATE (yychar);
+ YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
+ }
+
+ /* If the proper action on seeing token YYTOKEN is to reduce or to
+ detect an error, take that action. */
+ yyn += yytoken;
+ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+ goto yydefault;
+ yyn = yytable[yyn];
+ if (yyn <= 0)
+ {
+ if (yyn == 0 || yyn == YYTABLE_NINF)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Count tokens shifted since error; after three, turn off error
+ status. */
+ if (yyerrstatus)
+ yyerrstatus--;
+
+ /* Shift the look-ahead token. */
+ YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
+
+ /* Discard the shifted token unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ yystate = yyn;
+ *++yyvsp = yylval;
+ *++yylsp = yylloc;
+ goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state. |
+`-----------------------------------------------------------*/
+yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
+ goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- Do a reduction. |
+`-----------------------------*/
+yyreduce:
+ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+
+ /* If YYLEN is nonzero, implement the default value of the action:
+ `$$ = $1'.
+
+ Otherwise, the following line sets YYVAL to garbage.
+ This behavior is undocumented and Bison
+ users should not rely upon it. Assigning to YYVAL
+ unconditionally makes the parser a bit smaller, and it avoids a
+ GCC warning that YYVAL may be used uninitialized. */
+ yyval = yyvsp[1-yylen];
+
+ /* Default location. */
+ YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
+ YY_REDUCE_PRINT (yyn);
+ switch (yyn)
+ {
+ case 2:
+#line 90 "dtc-parser.y"
+ {
+ the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
+ ;}
+ break;
+
+ case 3:
+#line 94 "dtc-parser.y"
+ {
+ the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
+ ;}
+ break;
+
+ case 4:
+#line 101 "dtc-parser.y"
+ {
+ (yyval.re) = NULL;
+ ;}
+ break;
+
+ case 5:
+#line 105 "dtc-parser.y"
+ {
+ (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+ ;}
+ break;
+
+ case 6:
+#line 112 "dtc-parser.y"
+ {
+ (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
+ ;}
+ break;
+
+ case 7:
+#line 119 "dtc-parser.y"
+ {
+ (yyval.re) = NULL;
+ ;}
+ break;
+
+ case 8:
+#line 123 "dtc-parser.y"
+ {
+ (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+ ;}
+ break;
+
+ case 9:
+#line 130 "dtc-parser.y"
+ {
+ (yyval.re) = (yyvsp[(1) - (1)].re);
+ ;}
+ break;
+
+ case 10:
+#line 134 "dtc-parser.y"
+ {
+ (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
+ ;}
+ break;
+
+ case 11:
+#line 141 "dtc-parser.y"
+ {
+ (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
+ ;}
+ break;
+
+ case 12:
+#line 145 "dtc-parser.y"
+ {
+ (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
+ ;}
+ break;
+
+ case 13:
+#line 152 "dtc-parser.y"
+ {
+ (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
+ ;}
+ break;
+
+ case 14:
+#line 159 "dtc-parser.y"
+ {
+ (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
+ ;}
+ break;
+
+ case 15:
+#line 166 "dtc-parser.y"
+ {
+ (yyval.proplist) = NULL;
+ ;}
+ break;
+
+ case 16:
+#line 170 "dtc-parser.y"
+ {
+ (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
+ ;}
+ break;
+
+ case 17:
+#line 177 "dtc-parser.y"
+ {
+ (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
+ ;}
+ break;
+
+ case 18:
+#line 181 "dtc-parser.y"
+ {
+ (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
+ ;}
+ break;
+
+ case 19:
+#line 188 "dtc-parser.y"
+ {
+ (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
+ ;}
+ break;
+
+ case 20:
+#line 192 "dtc-parser.y"
+ {
+ (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+ ;}
+ break;
+
+ case 21:
+#line 196 "dtc-parser.y"
+ {
+ (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+ ;}
+ break;
+
+ case 22:
+#line 200 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 23:
+#line 204 "dtc-parser.y"
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
+ struct data d = empty_data;
+
+ if ((yyvsp[(6) - (9)].addr) != 0)
+ if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
+ yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+ (unsigned long long)(yyvsp[(6) - (9)].addr),
+ (yyvsp[(4) - (9)].data).val, strerror(errno));
+
+ d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
+
+ (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
+ dtc_close_file(file);
+ ;}
+ break;
+
+ case 24:
+#line 221 "dtc-parser.y"
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
+ struct data d = empty_data;
+
+ d = data_copy_file(file->file, -1);
+
+ (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
+ dtc_close_file(file);
+ ;}
+ break;
+
+ case 25:
+#line 232 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 26:
+#line 239 "dtc-parser.y"
+ {
+ (yyval.data) = empty_data;
+ ;}
+ break;
+
+ case 27:
+#line 243 "dtc-parser.y"
+ {
+ (yyval.data) = (yyvsp[(1) - (2)].data);
+ ;}
+ break;
+
+ case 28:
+#line 247 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 29:
+#line 254 "dtc-parser.y"
+ {
+ (yyval.data) = empty_data;
+ ;}
+ break;
+
+ case 30:
+#line 258 "dtc-parser.y"
+ {
+ (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
+ ;}
+ break;
+
+ case 31:
+#line 262 "dtc-parser.y"
+ {
+ (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
+ (yyvsp[(2) - (2)].labelref)), -1);
+ ;}
+ break;
+
+ case 32:
+#line 267 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 33:
+#line 274 "dtc-parser.y"
+ {
+ (yyval.cbase) = 16;
+ ;}
+ break;
+
+ case 35:
+#line 282 "dtc-parser.y"
+ {
+ (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
+ ;}
+ break;
+
+ case 36:
+#line 286 "dtc-parser.y"
+ {
+ (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
+ ;}
+ break;
+
+ case 37:
+#line 293 "dtc-parser.y"
+ {
+ (yyval.data) = empty_data;
+ ;}
+ break;
+
+ case 38:
+#line 297 "dtc-parser.y"
+ {
+ (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
+ ;}
+ break;
+
+ case 39:
+#line 301 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 40:
+#line 308 "dtc-parser.y"
+ {
+ (yyval.nodelist) = NULL;
+ ;}
+ break;
+
+ case 41:
+#line 312 "dtc-parser.y"
+ {
+ (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
+ ;}
+ break;
+
+ case 42:
+#line 316 "dtc-parser.y"
+ {
+ yyerror("syntax error: properties must precede subnodes");
+ YYERROR;
+ ;}
+ break;
+
+ case 43:
+#line 324 "dtc-parser.y"
+ {
+ (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
+ ;}
+ break;
+
+ case 44:
+#line 331 "dtc-parser.y"
+ {
+ (yyval.labelref) = NULL;
+ ;}
+ break;
+
+ case 45:
+#line 335 "dtc-parser.y"
+ {
+ (yyval.labelref) = (yyvsp[(1) - (1)].labelref);
+ ;}
+ break;
+
+
+/* Line 1267 of yacc.c. */
+#line 1780 "dtc-parser.tab.c"
+ default: break;
+ }
+ YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
+
+ YYPOPSTACK (yylen);
+ yylen = 0;
+ YY_STACK_PRINT (yyss, yyssp);
+
+ *++yyvsp = yyval;
+ *++yylsp = yyloc;
+
+ /* Now `shift' the result of the reduction. Determine what state
+ that goes to, based on the state we popped back to and the rule
+ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
+ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+ yystate = yydefgoto[yyn - YYNTOKENS];
+
+ goto yynewstate;
+
+
+/*------------------------------------.
+| yyerrlab -- here on detecting error |
+`------------------------------------*/
+yyerrlab:
+ /* If not already recovering from an error, report this error. */
+ if (!yyerrstatus)
+ {
+ ++yynerrs;
+#if ! YYERROR_VERBOSE
+ yyerror (YY_("syntax error"));
+#else
+ {
+ YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
+ if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
+ {
+ YYSIZE_T yyalloc = 2 * yysize;
+ if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
+ yyalloc = YYSTACK_ALLOC_MAXIMUM;
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+ yymsg = (char *) YYSTACK_ALLOC (yyalloc);
+ if (yymsg)
+ yymsg_alloc = yyalloc;
+ else
+ {
+ yymsg = yymsgbuf;
+ yymsg_alloc = sizeof yymsgbuf;
+ }
+ }
+
+ if (0 < yysize && yysize <= yymsg_alloc)
+ {
+ (void) yysyntax_error (yymsg, yystate, yychar);
+ yyerror (yymsg);
+ }
+ else
+ {
+ yyerror (YY_("syntax error"));
+ if (yysize != 0)
+ goto yyexhaustedlab;
+ }
+ }
+#endif
+ }
+
+ yyerror_range[0] = yylloc;
+
+ if (yyerrstatus == 3)
+ {
+ /* If just tried and failed to reuse look-ahead token after an
+ error, discard it. */
+
+ if (yychar <= YYEOF)
+ {
+ /* Return failure if at end of input. */
+ if (yychar == YYEOF)
+ YYABORT;
+ }
+ else
+ {
+ yydestruct ("Error: discarding",
+ yytoken, &yylval, &yylloc);
+ yychar = YYEMPTY;
+ }
+ }
+
+ /* Else will try to reuse look-ahead token after shifting the error
+ token. */
+ goto yyerrlab1;
+
+
+/*---------------------------------------------------.
+| yyerrorlab -- error raised explicitly by YYERROR. |
+`---------------------------------------------------*/
+yyerrorlab:
+
+ /* Pacify compilers like GCC when the user code never invokes
+ YYERROR and the label yyerrorlab therefore never appears in user
+ code. */
+ if (/*CONSTCOND*/ 0)
+ goto yyerrorlab;
+
+ yyerror_range[0] = yylsp[1-yylen];
+ /* Do not reclaim the symbols of the rule which action triggered
+ this YYERROR. */
+ YYPOPSTACK (yylen);
+ yylen = 0;
+ YY_STACK_PRINT (yyss, yyssp);
+ yystate = *yyssp;
+ goto yyerrlab1;
+
+
+/*-------------------------------------------------------------.
+| yyerrlab1 -- common code for both syntax error and YYERROR. |
+`-------------------------------------------------------------*/
+yyerrlab1:
+ yyerrstatus = 3; /* Each real token shifted decrements this. */
+
+ for (;;)
+ {
+ yyn = yypact[yystate];
+ if (yyn != YYPACT_NINF)
+ {
+ yyn += YYTERROR;
+ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
+ {
+ yyn = yytable[yyn];
+ if (0 < yyn)
+ break;
+ }
+ }
+
+ /* Pop the current state because it cannot handle the error token. */
+ if (yyssp == yyss)
+ YYABORT;
+
+ yyerror_range[0] = *yylsp;
+ yydestruct ("Error: popping",
+ yystos[yystate], yyvsp, yylsp);
+ YYPOPSTACK (1);
+ yystate = *yyssp;
+ YY_STACK_PRINT (yyss, yyssp);
+ }
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ *++yyvsp = yylval;
+
+ yyerror_range[1] = yylloc;
+ /* Using YYLLOC is tempting, but would change the location of
+ the look-ahead. YYLOC is available though. */
+ YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
+ *++yylsp = yyloc;
+
+ /* Shift the error token. */
+ YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
+
+ yystate = yyn;
+ goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here. |
+`-------------------------------------*/
+yyacceptlab:
+ yyresult = 0;
+ goto yyreturn;
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here. |
+`-----------------------------------*/
+yyabortlab:
+ yyresult = 1;
+ goto yyreturn;
+
+#ifndef yyoverflow
+/*-------------------------------------------------.
+| yyexhaustedlab -- memory exhaustion comes here. |
+`-------------------------------------------------*/
+yyexhaustedlab:
+ yyerror (YY_("memory exhausted"));
+ yyresult = 2;
+ /* Fall through. */
+#endif
+
+yyreturn:
+ if (yychar != YYEOF && yychar != YYEMPTY)
+ yydestruct ("Cleanup: discarding lookahead",
+ yytoken, &yylval, &yylloc);
+ /* Do not reclaim the symbols of the rule which action triggered
+ this YYABORT or YYACCEPT. */
+ YYPOPSTACK (yylen);
+ YY_STACK_PRINT (yyss, yyssp);
+ while (yyssp != yyss)
+ {
+ yydestruct ("Cleanup: popping",
+ yystos[*yyssp], yyvsp, yylsp);
+ YYPOPSTACK (1);
+ }
+#ifndef yyoverflow
+ if (yyss != yyssa)
+ YYSTACK_FREE (yyss);
+#endif
+#if YYERROR_VERBOSE
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+#endif
+ /* Make sure YYID is used. */
+ return YYID (yyresult);
+}
+
+
+#line 340 "dtc-parser.y"
+
+
+void yyerrorf(char const *s, ...)
+{
+ const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+ va_list va;
+ va_start(va, s);
+
+ if (strcmp(fname, "-") == 0)
+ fname = "stdin";
+
+ fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+ vfprintf(stderr, s, va);
+ fprintf(stderr, "\n");
+
+ treesource_error = 1;
+ va_end(va);
+}
+
+void yyerror (char const *s)
+{
+ yyerrorf("%s", s);
+}
+
+static unsigned long long eval_literal(const char *s, int base, int bits)
+{
+ unsigned long long val;
+ char *e;
+
+ errno = 0;
+ val = strtoull(s, &e, base);
+ if (*e)
+ yyerror("bad characters in literal");
+ else if ((errno == ERANGE)
+ || ((bits < 64) && (val >= (1ULL << bits))))
+ yyerror("literal out of range");
+ else if (errno != 0)
+ yyerror("bad literal");
+ return val;
+}
+
--- /dev/null
+/* A Bison parser, made by GNU Bison 2.3. */
+
+/* Skeleton interface for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
+
+/* As a special exception, you may create a larger work that contains
+ part or all of the Bison parser skeleton and distribute that work
+ under terms of your choice, so long as that work isn't itself a
+ parser generator using the skeleton or a modified version thereof
+ as a parser skeleton. Alternatively, if you modify or redistribute
+ the parser skeleton itself, you may (at your option) remove this
+ special exception, which will cause the skeleton and the resulting
+ Bison output files to be licensed under the GNU General Public
+ License without this special exception.
+
+ This special exception was added by the Free Software Foundation in
+ version 2.2 of Bison. */
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ DT_V1 = 258,
+ DT_MEMRESERVE = 259,
+ DT_PROPNODENAME = 260,
+ DT_LITERAL = 261,
+ DT_LEGACYLITERAL = 262,
+ DT_BASE = 263,
+ DT_BYTE = 264,
+ DT_STRING = 265,
+ DT_LABEL = 266,
+ DT_REF = 267,
+ DT_INCBIN = 268
+ };
+#endif
+/* Tokens. */
+#define DT_V1 258
+#define DT_MEMRESERVE 259
+#define DT_PROPNODENAME 260
+#define DT_LITERAL 261
+#define DT_LEGACYLITERAL 262
+#define DT_BASE 263
+#define DT_BYTE 264
+#define DT_STRING 265
+#define DT_LABEL 266
+#define DT_REF 267
+#define DT_INCBIN 268
+
+
+
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+#line 37 "dtc-parser.y"
+{
+ char *propnodename;
+ char *literal;
+ char *labelref;
+ unsigned int cbase;
+ uint8_t byte;
+ struct data data;
+
+ uint64_t addr;
+ cell_t cell;
+ struct property *prop;
+ struct property *proplist;
+ struct node *node;
+ struct node *nodelist;
+ struct reserve_info *re;
+}
+/* Line 1489 of yacc.c. */
+#line 92 "dtc-parser.tab.h"
+ YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+extern YYSTYPE yylval;
+
+#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
+typedef struct YYLTYPE
+{
+ int first_line;
+ int first_column;
+ int last_line;
+ int last_column;
+} YYLTYPE;
+# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
+# define YYLTYPE_IS_DECLARED 1
+# define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+extern YYLTYPE yylloc;
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+%locations
+
+%{
+#include <stdio.h>
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern int yylex(void);
+
+extern struct boot_info *the_boot_info;
+extern int treesource_error;
+
+static unsigned long long eval_literal(const char *s, int base, int bits);
+%}
+
+%union {
+ char *propnodename;
+ char *literal;
+ char *labelref;
+ unsigned int cbase;
+ uint8_t byte;
+ struct data data;
+
+ uint64_t addr;
+ cell_t cell;
+ struct property *prop;
+ struct property *proplist;
+ struct node *node;
+ struct node *nodelist;
+ struct reserve_info *re;
+}
+
+%token DT_V1
+%token DT_MEMRESERVE
+%token <propnodename> DT_PROPNODENAME
+%token <literal> DT_LITERAL
+%token <literal> DT_LEGACYLITERAL
+%token <cbase> DT_BASE
+%token <byte> DT_BYTE
+%token <data> DT_STRING
+%token <labelref> DT_LABEL
+%token <labelref> DT_REF
+%token DT_INCBIN
+
+%type <data> propdata
+%type <data> propdataprefix
+%type <re> memreserve
+%type <re> memreserves
+%type <re> v0_memreserve
+%type <re> v0_memreserves
+%type <addr> addr
+%type <data> celllist
+%type <cbase> cellbase
+%type <cell> cellval
+%type <data> bytestring
+%type <prop> propdef
+%type <proplist> proplist
+
+%type <node> devicetree
+%type <node> nodedef
+%type <node> subnode
+%type <nodelist> subnodes
+%type <labelref> label
+
+%%
+
+sourcefile:
+ DT_V1 ';' memreserves devicetree
+ {
+ the_boot_info = build_boot_info($3, $4, 0);
+ }
+ | v0_memreserves devicetree
+ {
+ the_boot_info = build_boot_info($1, $2, 0);
+ }
+ ;
+
+memreserves:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | memreserve memreserves
+ {
+ $$ = chain_reserve_entry($1, $2);
+ }
+ ;
+
+memreserve:
+ label DT_MEMRESERVE addr addr ';'
+ {
+ $$ = build_reserve_entry($3, $4, $1);
+ }
+ ;
+
+v0_memreserves:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | v0_memreserve v0_memreserves
+ {
+ $$ = chain_reserve_entry($1, $2);
+ };
+ ;
+
+v0_memreserve:
+ memreserve
+ {
+ $$ = $1;
+ }
+ | label DT_MEMRESERVE addr '-' addr ';'
+ {
+ $$ = build_reserve_entry($3, $5 - $3 + 1, $1);
+ }
+ ;
+
+addr:
+ DT_LITERAL
+ {
+ $$ = eval_literal($1, 0, 64);
+ }
+ | DT_LEGACYLITERAL
+ {
+ $$ = eval_literal($1, 16, 64);
+ }
+ ;
+
+devicetree:
+ '/' nodedef
+ {
+ $$ = name_node($2, "", NULL);
+ }
+ ;
+
+nodedef:
+ '{' proplist subnodes '}' ';'
+ {
+ $$ = build_node($2, $3);
+ }
+ ;
+
+proplist:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | proplist propdef
+ {
+ $$ = chain_property($2, $1);
+ }
+ ;
+
+propdef:
+ label DT_PROPNODENAME '=' propdata ';'
+ {
+ $$ = build_property($2, $4, $1);
+ }
+ | label DT_PROPNODENAME ';'
+ {
+ $$ = build_property($2, empty_data, $1);
+ }
+ ;
+
+propdata:
+ propdataprefix DT_STRING
+ {
+ $$ = data_merge($1, $2);
+ }
+ | propdataprefix '<' celllist '>'
+ {
+ $$ = data_merge($1, $3);
+ }
+ | propdataprefix '[' bytestring ']'
+ {
+ $$ = data_merge($1, $3);
+ }
+ | propdataprefix DT_REF
+ {
+ $$ = data_add_marker($1, REF_PATH, $2);
+ }
+ | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file($4.val, &path);
+ struct data d = empty_data;
+
+ if ($6 != 0)
+ if (fseek(file->file, $6, SEEK_SET) != 0)
+ yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+ (unsigned long long)$6,
+ $4.val, strerror(errno));
+
+ d = data_copy_file(file->file, $8);
+
+ $$ = data_merge($1, d);
+ dtc_close_file(file);
+ }
+ | propdataprefix DT_INCBIN '(' DT_STRING ')'
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file($4.val, &path);
+ struct data d = empty_data;
+
+ d = data_copy_file(file->file, -1);
+
+ $$ = data_merge($1, d);
+ dtc_close_file(file);
+ }
+ | propdata DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+propdataprefix:
+ /* empty */
+ {
+ $$ = empty_data;
+ }
+ | propdata ','
+ {
+ $$ = $1;
+ }
+ | propdataprefix DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+celllist:
+ /* empty */
+ {
+ $$ = empty_data;
+ }
+ | celllist cellval
+ {
+ $$ = data_append_cell($1, $2);
+ }
+ | celllist DT_REF
+ {
+ $$ = data_append_cell(data_add_marker($1, REF_PHANDLE,
+ $2), -1);
+ }
+ | celllist DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+cellbase:
+ /* empty */
+ {
+ $$ = 16;
+ }
+ | DT_BASE
+ ;
+
+cellval:
+ DT_LITERAL
+ {
+ $$ = eval_literal($1, 0, 32);
+ }
+ | cellbase DT_LEGACYLITERAL
+ {
+ $$ = eval_literal($2, $1, 32);
+ }
+ ;
+
+bytestring:
+ /* empty */
+ {
+ $$ = empty_data;
+ }
+ | bytestring DT_BYTE
+ {
+ $$ = data_append_byte($1, $2);
+ }
+ | bytestring DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+subnodes:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | subnode subnodes
+ {
+ $$ = chain_node($1, $2);
+ }
+ | subnode propdef
+ {
+ yyerror("syntax error: properties must precede subnodes");
+ YYERROR;
+ }
+ ;
+
+subnode:
+ label DT_PROPNODENAME nodedef
+ {
+ $$ = name_node($3, $2, $1);
+ }
+ ;
+
+label:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | DT_LABEL
+ {
+ $$ = $1;
+ }
+ ;
+
+%%
+
+void yyerrorf(char const *s, ...)
+{
+ const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+ va_list va;
+ va_start(va, s);
+
+ if (strcmp(fname, "-") == 0)
+ fname = "stdin";
+
+ fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+ vfprintf(stderr, s, va);
+ fprintf(stderr, "\n");
+
+ treesource_error = 1;
+ va_end(va);
+}
+
+void yyerror (char const *s)
+{
+ yyerrorf("%s", s);
+}
+
+static unsigned long long eval_literal(const char *s, int base, int bits)
+{
+ unsigned long long val;
+ char *e;
+
+ errno = 0;
+ val = strtoull(s, &e, base);
+ if (*e)
+ yyerror("bad characters in literal");
+ else if ((errno == ERANGE)
+ || ((bits < 64) && (val >= (1ULL << bits))))
+ yyerror("literal out of range");
+ else if (errno != 0)
+ yyerror("bad literal");
+ return val;
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+#include "version_gen.h"
+
+/*
+ * Command line options
+ */
+int quiet; /* Level of quietness */
+int reservenum; /* Number of memory reservation slots */
+int minsize; /* Minimum blob size */
+int padsize; /* Additional padding to blob */
+
+char *join_path(const char *path, const char *name)
+{
+ int lenp = strlen(path);
+ int lenn = strlen(name);
+ int len;
+ int needslash = 1;
+ char *str;
+
+ len = lenp + lenn + 2;
+ if ((lenp > 0) && (path[lenp-1] == '/')) {
+ needslash = 0;
+ len--;
+ }
+
+ str = xmalloc(len);
+ memcpy(str, path, lenp);
+ if (needslash) {
+ str[lenp] = '/';
+ lenp++;
+ }
+ memcpy(str+lenp, name, lenn+1);
+ return str;
+}
+
+static void fill_fullpaths(struct node *tree, const char *prefix)
+{
+ struct node *child;
+ const char *unit;
+
+ tree->fullpath = join_path(prefix, tree->name);
+
+ unit = strchr(tree->name, '@');
+ if (unit)
+ tree->basenamelen = unit - tree->name;
+ else
+ tree->basenamelen = strlen(tree->name);
+
+ for_each_child(tree, child)
+ fill_fullpaths(child, tree->fullpath);
+}
+
+static void __attribute__ ((noreturn)) usage(void)
+{
+ fprintf(stderr, "Usage:\n");
+ fprintf(stderr, "\tdtc [options] <input file>\n");
+ fprintf(stderr, "\nOptions:\n");
+ fprintf(stderr, "\t-h\n");
+ fprintf(stderr, "\t\tThis help text\n");
+ fprintf(stderr, "\t-q\n");
+ fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n");
+ fprintf(stderr, "\t-I <input format>\n");
+ fprintf(stderr, "\t\tInput formats are:\n");
+ fprintf(stderr, "\t\t\tdts - device tree source text\n");
+ fprintf(stderr, "\t\t\tdtb - device tree blob\n");
+ fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n");
+ fprintf(stderr, "\t-o <output file>\n");
+ fprintf(stderr, "\t-O <output format>\n");
+ fprintf(stderr, "\t\tOutput formats are:\n");
+ fprintf(stderr, "\t\t\tdts - device tree source text\n");
+ fprintf(stderr, "\t\t\tdtb - device tree blob\n");
+ fprintf(stderr, "\t\t\tasm - assembler source\n");
+ fprintf(stderr, "\t-V <output version>\n");
+ fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION);
+ fprintf(stderr, "\t-R <number>\n");
+ fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n");
+ fprintf(stderr, "\t-S <bytes>\n");
+ fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n");
+ fprintf(stderr, "\t-p <bytes>\n");
+ fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n");
+ fprintf(stderr, "\t-b <number>\n");
+ fprintf(stderr, "\t\tSet the physical boot cpu\n");
+ fprintf(stderr, "\t-f\n");
+ fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
+ fprintf(stderr, "\t-v\n");
+ fprintf(stderr, "\t\tPrint DTC version and exit\n");
+ exit(3);
+}
+
+int main(int argc, char *argv[])
+{
+ struct boot_info *bi;
+ const char *inform = "dts";
+ const char *outform = "dts";
+ const char *outname = "-";
+ int force = 0, check = 0;
+ const char *arg;
+ int opt;
+ FILE *outf = NULL;
+ int outversion = DEFAULT_FDT_VERSION;
+ long long cmdline_boot_cpuid = -1;
+
+ quiet = 0;
+ reservenum = 0;
+ minsize = 0;
+ padsize = 0;
+
+ while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) {
+ switch (opt) {
+ case 'I':
+ inform = optarg;
+ break;
+ case 'O':
+ outform = optarg;
+ break;
+ case 'o':
+ outname = optarg;
+ break;
+ case 'V':
+ outversion = strtol(optarg, NULL, 0);
+ break;
+ case 'R':
+ reservenum = strtol(optarg, NULL, 0);
+ break;
+ case 'S':
+ minsize = strtol(optarg, NULL, 0);
+ break;
+ case 'p':
+ padsize = strtol(optarg, NULL, 0);
+ break;
+ case 'f':
+ force = 1;
+ break;
+ case 'c':
+ check = 1;
+ break;
+ case 'q':
+ quiet++;
+ break;
+ case 'b':
+ cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
+ break;
+ case 'v':
+ printf("Version: %s\n", DTC_VERSION);
+ exit(0);
+ case 'h':
+ default:
+ usage();
+ }
+ }
+
+ if (argc > (optind+1))
+ usage();
+ else if (argc < (optind+1))
+ arg = "-";
+ else
+ arg = argv[optind];
+
+ /* minsize and padsize are mutually exclusive */
+ if (minsize && padsize)
+ die("Can't set both -p and -S\n");
+
+ fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
+ inform, outform, arg);
+
+ if (streq(inform, "dts"))
+ bi = dt_from_source(arg);
+ else if (streq(inform, "fs"))
+ bi = dt_from_fs(arg);
+ else if(streq(inform, "dtb"))
+ bi = dt_from_blob(arg);
+ else
+ die("Unknown input format \"%s\"\n", inform);
+
+ if (cmdline_boot_cpuid != -1)
+ bi->boot_cpuid_phys = cmdline_boot_cpuid;
+
+ fill_fullpaths(bi->dt, "");
+ process_checks(force, bi);
+
+
+ if (streq(outname, "-")) {
+ outf = stdout;
+ } else {
+ outf = fopen(outname, "w");
+ if (! outf)
+ die("Couldn't open output file %s: %s\n",
+ outname, strerror(errno));
+ }
+
+ if (streq(outform, "dts")) {
+ dt_to_source(outf, bi);
+ } else if (streq(outform, "dtb")) {
+ dt_to_blob(outf, bi, outversion);
+ } else if (streq(outform, "asm")) {
+ dt_to_asm(outf, bi, outversion);
+ } else if (streq(outform, "null")) {
+ /* do nothing */
+ } else {
+ die("Unknown output format \"%s\"\n", outform);
+ }
+
+ exit(0);
+}
--- /dev/null
+#ifndef _DTC_H
+#define _DTC_H
+
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <ctype.h>
+#include <errno.h>
+#include <unistd.h>
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define DEFAULT_FDT_VERSION 17
+/*
+ * Command line options
+ */
+extern int quiet; /* Level of quietness */
+extern int reservenum; /* Number of memory reservation slots */
+extern int minsize; /* Minimum blob size */
+extern int padsize; /* Additional padding to blob */
+
+static inline void __attribute__((noreturn)) die(char * str, ...)
+{
+ va_list ap;
+
+ va_start(ap, str);
+ fprintf(stderr, "FATAL ERROR: ");
+ vfprintf(stderr, str, ap);
+ exit(1);
+}
+
+static inline void *xmalloc(size_t len)
+{
+ void *new = malloc(len);
+
+ if (! new)
+ die("malloc() failed\n");
+
+ return new;
+}
+
+static inline void *xrealloc(void *p, size_t len)
+{
+ void *new = realloc(p, len);
+
+ if (! new)
+ die("realloc() failed (len=%d)\n", len);
+
+ return new;
+}
+
+typedef uint32_t cell_t;
+
+
+#define streq(a, b) (strcmp((a), (b)) == 0)
+#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0)
+
+#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/* Data blobs */
+enum markertype {
+ REF_PHANDLE,
+ REF_PATH,
+ LABEL,
+};
+
+struct marker {
+ enum markertype type;
+ int offset;
+ char *ref;
+ struct marker *next;
+};
+
+struct data {
+ int len;
+ char *val;
+ struct marker *markers;
+};
+
+
+#define empty_data ((struct data){ /* all .members = 0 or NULL */ })
+
+#define for_each_marker(m) \
+ for (; (m); (m) = (m)->next)
+#define for_each_marker_of_type(m, t) \
+ for_each_marker(m) \
+ if ((m)->type == (t))
+
+void data_free(struct data d);
+
+struct data data_grow_for(struct data d, int xlen);
+
+struct data data_copy_mem(const char *mem, int len);
+struct data data_copy_escape_string(const char *s, int len);
+struct data data_copy_file(FILE *f, size_t len);
+
+struct data data_append_data(struct data d, const void *p, int len);
+struct data data_insert_at_marker(struct data d, struct marker *m,
+ const void *p, int len);
+struct data data_merge(struct data d1, struct data d2);
+struct data data_append_cell(struct data d, cell_t word);
+struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
+struct data data_append_addr(struct data d, uint64_t addr);
+struct data data_append_byte(struct data d, uint8_t byte);
+struct data data_append_zeroes(struct data d, int len);
+struct data data_append_align(struct data d, int align);
+
+struct data data_add_marker(struct data d, enum markertype type, char *ref);
+
+int data_is_one_string(struct data d);
+
+/* DT constraints */
+
+#define MAX_PROPNAME_LEN 31
+#define MAX_NODENAME_LEN 31
+
+/* Live trees */
+struct property {
+ char *name;
+ struct data val;
+
+ struct property *next;
+
+ char *label;
+};
+
+struct node {
+ char *name;
+ struct property *proplist;
+ struct node *children;
+
+ struct node *parent;
+ struct node *next_sibling;
+
+ char *fullpath;
+ int basenamelen;
+
+ cell_t phandle;
+ int addr_cells, size_cells;
+
+ char *label;
+};
+
+#define for_each_property(n, p) \
+ for ((p) = (n)->proplist; (p); (p) = (p)->next)
+
+#define for_each_child(n, c) \
+ for ((c) = (n)->children; (c); (c) = (c)->next_sibling)
+
+struct property *build_property(char *name, struct data val, char *label);
+struct property *chain_property(struct property *first, struct property *list);
+struct property *reverse_properties(struct property *first);
+
+struct node *build_node(struct property *proplist, struct node *children);
+struct node *name_node(struct node *node, char *name, char *label);
+struct node *chain_node(struct node *first, struct node *list);
+
+void add_property(struct node *node, struct property *prop);
+void add_child(struct node *parent, struct node *child);
+
+const char *get_unitname(struct node *node);
+struct property *get_property(struct node *node, const char *propname);
+cell_t propval_cell(struct property *prop);
+struct node *get_subnode(struct node *node, const char *nodename);
+struct node *get_node_by_path(struct node *tree, const char *path);
+struct node *get_node_by_label(struct node *tree, const char *label);
+struct node *get_node_by_phandle(struct node *tree, cell_t phandle);
+struct node *get_node_by_ref(struct node *tree, const char *ref);
+cell_t get_node_phandle(struct node *root, struct node *node);
+
+/* Boot info (tree plus memreserve information */
+
+struct reserve_info {
+ struct fdt_reserve_entry re;
+
+ struct reserve_info *next;
+
+ char *label;
+};
+
+struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
+struct reserve_info *chain_reserve_entry(struct reserve_info *first,
+ struct reserve_info *list);
+struct reserve_info *add_reserve_entry(struct reserve_info *list,
+ struct reserve_info *new);
+
+
+struct boot_info {
+ struct reserve_info *reservelist;
+ struct node *dt; /* the device tree */
+ uint32_t boot_cpuid_phys;
+};
+
+struct boot_info *build_boot_info(struct reserve_info *reservelist,
+ struct node *tree, uint32_t boot_cpuid_phys);
+
+/* Checks */
+
+void process_checks(int force, struct boot_info *bi);
+
+/* Flattened trees */
+
+void dt_to_blob(FILE *f, struct boot_info *bi, int version);
+void dt_to_asm(FILE *f, struct boot_info *bi, int version);
+
+struct boot_info *dt_from_blob(const char *fname);
+
+/* Tree source */
+
+void dt_to_source(FILE *f, struct boot_info *bi);
+struct boot_info *dt_from_source(const char *f);
+
+/* FS trees */
+
+struct boot_info *dt_from_fs(const char *dirname);
+
+/* misc */
+
+char *join_path(const char *path, const char *name);
+
+#endif /* _DTC_H */
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+#define FTF_FULLPATH 0x1
+#define FTF_VARALIGN 0x2
+#define FTF_NAMEPROPS 0x4
+#define FTF_BOOTCPUID 0x8
+#define FTF_STRTABSIZE 0x10
+#define FTF_STRUCTSIZE 0x20
+#define FTF_NOPS 0x40
+
+static struct version_info {
+ int version;
+ int last_comp_version;
+ int hdr_size;
+ int flags;
+} version_table[] = {
+ {1, 1, FDT_V1_SIZE,
+ FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS},
+ {2, 1, FDT_V2_SIZE,
+ FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID},
+ {3, 1, FDT_V3_SIZE,
+ FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE},
+ {16, 16, FDT_V3_SIZE,
+ FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS},
+ {17, 16, FDT_V17_SIZE,
+ FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS},
+};
+
+struct emitter {
+ void (*cell)(void *, cell_t);
+ void (*string)(void *, char *, int);
+ void (*align)(void *, int);
+ void (*data)(void *, struct data);
+ void (*beginnode)(void *, const char *);
+ void (*endnode)(void *, const char *);
+ void (*property)(void *, const char *);
+};
+
+static void bin_emit_cell(void *e, cell_t val)
+{
+ struct data *dtbuf = e;
+
+ *dtbuf = data_append_cell(*dtbuf, val);
+}
+
+static void bin_emit_string(void *e, char *str, int len)
+{
+ struct data *dtbuf = e;
+
+ if (len == 0)
+ len = strlen(str);
+
+ *dtbuf = data_append_data(*dtbuf, str, len);
+ *dtbuf = data_append_byte(*dtbuf, '\0');
+}
+
+static void bin_emit_align(void *e, int a)
+{
+ struct data *dtbuf = e;
+
+ *dtbuf = data_append_align(*dtbuf, a);
+}
+
+static void bin_emit_data(void *e, struct data d)
+{
+ struct data *dtbuf = e;
+
+ *dtbuf = data_append_data(*dtbuf, d.val, d.len);
+}
+
+static void bin_emit_beginnode(void *e, const char *label)
+{
+ bin_emit_cell(e, FDT_BEGIN_NODE);
+}
+
+static void bin_emit_endnode(void *e, const char *label)
+{
+ bin_emit_cell(e, FDT_END_NODE);
+}
+
+static void bin_emit_property(void *e, const char *label)
+{
+ bin_emit_cell(e, FDT_PROP);
+}
+
+static struct emitter bin_emitter = {
+ .cell = bin_emit_cell,
+ .string = bin_emit_string,
+ .align = bin_emit_align,
+ .data = bin_emit_data,
+ .beginnode = bin_emit_beginnode,
+ .endnode = bin_emit_endnode,
+ .property = bin_emit_property,
+};
+
+static void emit_label(FILE *f, const char *prefix, const char *label)
+{
+ fprintf(f, "\t.globl\t%s_%s\n", prefix, label);
+ fprintf(f, "%s_%s:\n", prefix, label);
+ fprintf(f, "_%s_%s:\n", prefix, label);
+}
+
+static void emit_offset_label(FILE *f, const char *label, int offset)
+{
+ fprintf(f, "\t.globl\t%s\n", label);
+ fprintf(f, "%s\t= . + %d\n", label, offset);
+}
+
+static void asm_emit_cell(void *e, cell_t val)
+{
+ FILE *f = e;
+
+ fprintf(f, "\t.long\t0x%x\n", val);
+}
+
+static void asm_emit_string(void *e, char *str, int len)
+{
+ FILE *f = e;
+ char c = 0;
+
+ if (len != 0) {
+ /* XXX: ewww */
+ c = str[len];
+ str[len] = '\0';
+ }
+
+ fprintf(f, "\t.string\t\"%s\"\n", str);
+
+ if (len != 0) {
+ str[len] = c;
+ }
+}
+
+static void asm_emit_align(void *e, int a)
+{
+ FILE *f = e;
+
+ fprintf(f, "\t.balign\t%d\n", a);
+}
+
+static void asm_emit_data(void *e, struct data d)
+{
+ FILE *f = e;
+ int off = 0;
+ struct marker *m = d.markers;
+
+ for_each_marker_of_type(m, LABEL)
+ emit_offset_label(f, m->ref, m->offset);
+
+ while ((d.len - off) >= sizeof(uint32_t)) {
+ fprintf(f, "\t.long\t0x%x\n",
+ fdt32_to_cpu(*((uint32_t *)(d.val+off))));
+ off += sizeof(uint32_t);
+ }
+
+ while ((d.len - off) >= 1) {
+ fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
+ off += 1;
+ }
+
+ assert(off == d.len);
+}
+
+static void asm_emit_beginnode(void *e, const char *label)
+{
+ FILE *f = e;
+
+ if (label) {
+ fprintf(f, "\t.globl\t%s\n", label);
+ fprintf(f, "%s:\n", label);
+ }
+ fprintf(f, "\t.long\tFDT_BEGIN_NODE\n");
+}
+
+static void asm_emit_endnode(void *e, const char *label)
+{
+ FILE *f = e;
+
+ fprintf(f, "\t.long\tFDT_END_NODE\n");
+ if (label) {
+ fprintf(f, "\t.globl\t%s_end\n", label);
+ fprintf(f, "%s_end:\n", label);
+ }
+}
+
+static void asm_emit_property(void *e, const char *label)
+{
+ FILE *f = e;
+
+ if (label) {
+ fprintf(f, "\t.globl\t%s\n", label);
+ fprintf(f, "%s:\n", label);
+ }
+ fprintf(f, "\t.long\tFDT_PROP\n");
+}
+
+static struct emitter asm_emitter = {
+ .cell = asm_emit_cell,
+ .string = asm_emit_string,
+ .align = asm_emit_align,
+ .data = asm_emit_data,
+ .beginnode = asm_emit_beginnode,
+ .endnode = asm_emit_endnode,
+ .property = asm_emit_property,
+};
+
+static int stringtable_insert(struct data *d, const char *str)
+{
+ int i;
+
+ /* FIXME: do this more efficiently? */
+
+ for (i = 0; i < d->len; i++) {
+ if (streq(str, d->val + i))
+ return i;
+ }
+
+ *d = data_append_data(*d, str, strlen(str)+1);
+ return i;
+}
+
+static void flatten_tree(struct node *tree, struct emitter *emit,
+ void *etarget, struct data *strbuf,
+ struct version_info *vi)
+{
+ struct property *prop;
+ struct node *child;
+ int seen_name_prop = 0;
+
+ emit->beginnode(etarget, tree->label);
+
+ if (vi->flags & FTF_FULLPATH)
+ emit->string(etarget, tree->fullpath, 0);
+ else
+ emit->string(etarget, tree->name, 0);
+
+ emit->align(etarget, sizeof(cell_t));
+
+ for_each_property(tree, prop) {
+ int nameoff;
+
+ if (streq(prop->name, "name"))
+ seen_name_prop = 1;
+
+ nameoff = stringtable_insert(strbuf, prop->name);
+
+ emit->property(etarget, prop->label);
+ emit->cell(etarget, prop->val.len);
+ emit->cell(etarget, nameoff);
+
+ if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8))
+ emit->align(etarget, 8);
+
+ emit->data(etarget, prop->val);
+ emit->align(etarget, sizeof(cell_t));
+ }
+
+ if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) {
+ emit->property(etarget, NULL);
+ emit->cell(etarget, tree->basenamelen+1);
+ emit->cell(etarget, stringtable_insert(strbuf, "name"));
+
+ if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8))
+ emit->align(etarget, 8);
+
+ emit->string(etarget, tree->name, tree->basenamelen);
+ emit->align(etarget, sizeof(cell_t));
+ }
+
+ for_each_child(tree, child) {
+ flatten_tree(child, emit, etarget, strbuf, vi);
+ }
+
+ emit->endnode(etarget, tree->label);
+}
+
+static struct data flatten_reserve_list(struct reserve_info *reservelist,
+ struct version_info *vi)
+{
+ struct reserve_info *re;
+ struct data d = empty_data;
+ static struct fdt_reserve_entry null_re = {0,0};
+ int j;
+
+ for (re = reservelist; re; re = re->next) {
+ d = data_append_re(d, &re->re);
+ }
+ /*
+ * Add additional reserved slots if the user asked for them.
+ */
+ for (j = 0; j < reservenum; j++) {
+ d = data_append_re(d, &null_re);
+ }
+
+ return d;
+}
+
+static void make_fdt_header(struct fdt_header *fdt,
+ struct version_info *vi,
+ int reservesize, int dtsize, int strsize,
+ int boot_cpuid_phys)
+{
+ int reserve_off;
+
+ reservesize += sizeof(struct fdt_reserve_entry);
+
+ memset(fdt, 0xff, sizeof(*fdt));
+
+ fdt->magic = cpu_to_fdt32(FDT_MAGIC);
+ fdt->version = cpu_to_fdt32(vi->version);
+ fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version);
+
+ /* Reserve map should be doubleword aligned */
+ reserve_off = ALIGN(vi->hdr_size, 8);
+
+ fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off);
+ fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize);
+ fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize
+ + dtsize);
+ fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize);
+
+ if (vi->flags & FTF_BOOTCPUID)
+ fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys);
+ if (vi->flags & FTF_STRTABSIZE)
+ fdt->size_dt_strings = cpu_to_fdt32(strsize);
+ if (vi->flags & FTF_STRUCTSIZE)
+ fdt->size_dt_struct = cpu_to_fdt32(dtsize);
+}
+
+void dt_to_blob(FILE *f, struct boot_info *bi, int version)
+{
+ struct version_info *vi = NULL;
+ int i;
+ struct data blob = empty_data;
+ struct data reservebuf = empty_data;
+ struct data dtbuf = empty_data;
+ struct data strbuf = empty_data;
+ struct fdt_header fdt;
+ int padlen = 0;
+
+ for (i = 0; i < ARRAY_SIZE(version_table); i++) {
+ if (version_table[i].version == version)
+ vi = &version_table[i];
+ }
+ if (!vi)
+ die("Unknown device tree blob version %d\n", version);
+
+ flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi);
+ bin_emit_cell(&dtbuf, FDT_END);
+
+ reservebuf = flatten_reserve_list(bi->reservelist, vi);
+
+ /* Make header */
+ make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
+ bi->boot_cpuid_phys);
+
+ /*
+ * If the user asked for more space than is used, adjust the totalsize.
+ */
+ if (minsize > 0) {
+ padlen = minsize - fdt32_to_cpu(fdt.totalsize);
+ if ((padlen < 0) && (quiet < 1))
+ fprintf(stderr,
+ "Warning: blob size %d >= minimum size %d\n",
+ fdt32_to_cpu(fdt.totalsize), minsize);
+ }
+
+ if (padsize > 0)
+ padlen = padsize;
+
+ if (padlen > 0) {
+ int tsize = fdt32_to_cpu(fdt.totalsize);
+ tsize += padlen;
+ fdt.totalsize = cpu_to_fdt32(tsize);
+ }
+
+ /*
+ * Assemble the blob: start with the header, add with alignment
+ * the reserve buffer, add the reserve map terminating zeroes,
+ * the device tree itself, and finally the strings.
+ */
+ blob = data_append_data(blob, &fdt, vi->hdr_size);
+ blob = data_append_align(blob, 8);
+ blob = data_merge(blob, reservebuf);
+ blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
+ blob = data_merge(blob, dtbuf);
+ blob = data_merge(blob, strbuf);
+
+ /*
+ * If the user asked for more space than is used, pad out the blob.
+ */
+ if (padlen > 0)
+ blob = data_append_zeroes(blob, padlen);
+
+ fwrite(blob.val, blob.len, 1, f);
+
+ if (ferror(f))
+ die("Error writing device tree blob: %s\n", strerror(errno));
+
+ /*
+ * data_merge() frees the right-hand element so only the blob
+ * remains to be freed.
+ */
+ data_free(blob);
+}
+
+static void dump_stringtable_asm(FILE *f, struct data strbuf)
+{
+ const char *p;
+ int len;
+
+ p = strbuf.val;
+
+ while (p < (strbuf.val + strbuf.len)) {
+ len = strlen(p);
+ fprintf(f, "\t.string \"%s\"\n", p);
+ p += len+1;
+ }
+}
+
+void dt_to_asm(FILE *f, struct boot_info *bi, int version)
+{
+ struct version_info *vi = NULL;
+ int i;
+ struct data strbuf = empty_data;
+ struct reserve_info *re;
+ const char *symprefix = "dt";
+
+ for (i = 0; i < ARRAY_SIZE(version_table); i++) {
+ if (version_table[i].version == version)
+ vi = &version_table[i];
+ }
+ if (!vi)
+ die("Unknown device tree blob version %d\n", version);
+
+ fprintf(f, "/* autogenerated by dtc, do not edit */\n\n");
+ fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC);
+ fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE);
+ fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE);
+ fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP);
+ fprintf(f, "#define FDT_END 0x%x\n", FDT_END);
+ fprintf(f, "\n");
+
+ emit_label(f, symprefix, "blob_start");
+ emit_label(f, symprefix, "header");
+ fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n");
+ fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version);
+ fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n",
+ vi->last_comp_version);
+
+ if (vi->flags & FTF_BOOTCPUID)
+ fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
+ bi->boot_cpuid_phys);
+
+ if (vi->flags & FTF_STRTABSIZE)
+ fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
+ symprefix, symprefix);
+
+ if (vi->flags & FTF_STRUCTSIZE)
+ fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n",
+ symprefix, symprefix);
+
+ /*
+ * Reserve map entries.
+ * Align the reserve map to a doubleword boundary.
+ * Each entry is an (address, size) pair of u64 values.
+ * Always supply a zero-sized temination entry.
+ */
+ asm_emit_align(f, 8);
+ emit_label(f, symprefix, "reserve_map");
+
+ fprintf(f, "/* Memory reserve map from source file */\n");
+
+ /*
+ * Use .long on high and low halfs of u64s to avoid .quad
+ * as it appears .quad isn't available in some assemblers.
+ */
+ for (re = bi->reservelist; re; re = re->next) {
+ if (re->label) {
+ fprintf(f, "\t.globl\t%s\n", re->label);
+ fprintf(f, "%s:\n", re->label);
+ }
+ fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
+ (unsigned int)(re->re.address >> 32),
+ (unsigned int)(re->re.address & 0xffffffff));
+ fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
+ (unsigned int)(re->re.size >> 32),
+ (unsigned int)(re->re.size & 0xffffffff));
+ }
+ for (i = 0; i < reservenum; i++) {
+ fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
+ }
+
+ fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
+
+ emit_label(f, symprefix, "struct_start");
+ flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi);
+ fprintf(f, "\t.long\tFDT_END\n");
+ emit_label(f, symprefix, "struct_end");
+
+ emit_label(f, symprefix, "strings_start");
+ dump_stringtable_asm(f, strbuf);
+ emit_label(f, symprefix, "strings_end");
+
+ emit_label(f, symprefix, "blob_end");
+
+ /*
+ * If the user asked for more space than is used, pad it out.
+ */
+ if (minsize > 0) {
+ fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n",
+ minsize, symprefix, symprefix);
+ }
+ if (padsize > 0) {
+ fprintf(f, "\t.space\t%d, 0\n", padsize);
+ }
+ emit_label(f, symprefix, "blob_abs_end");
+
+ data_free(strbuf);
+}
+
+struct inbuf {
+ char *base, *limit, *ptr;
+};
+
+static void inbuf_init(struct inbuf *inb, void *base, void *limit)
+{
+ inb->base = base;
+ inb->limit = limit;
+ inb->ptr = inb->base;
+}
+
+static void flat_read_chunk(struct inbuf *inb, void *p, int len)
+{
+ if ((inb->ptr + len) > inb->limit)
+ die("Premature end of data parsing flat device tree\n");
+
+ memcpy(p, inb->ptr, len);
+
+ inb->ptr += len;
+}
+
+static uint32_t flat_read_word(struct inbuf *inb)
+{
+ uint32_t val;
+
+ assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
+
+ flat_read_chunk(inb, &val, sizeof(val));
+
+ return fdt32_to_cpu(val);
+}
+
+static void flat_realign(struct inbuf *inb, int align)
+{
+ int off = inb->ptr - inb->base;
+
+ inb->ptr = inb->base + ALIGN(off, align);
+ if (inb->ptr > inb->limit)
+ die("Premature end of data parsing flat device tree\n");
+}
+
+static char *flat_read_string(struct inbuf *inb)
+{
+ int len = 0;
+ const char *p = inb->ptr;
+ char *str;
+
+ do {
+ if (p >= inb->limit)
+ die("Premature end of data parsing flat device tree\n");
+ len++;
+ } while ((*p++) != '\0');
+
+ str = strdup(inb->ptr);
+
+ inb->ptr += len;
+
+ flat_realign(inb, sizeof(uint32_t));
+
+ return str;
+}
+
+static struct data flat_read_data(struct inbuf *inb, int len)
+{
+ struct data d = empty_data;
+
+ if (len == 0)
+ return empty_data;
+
+ d = data_grow_for(d, len);
+ d.len = len;
+
+ flat_read_chunk(inb, d.val, len);
+
+ flat_realign(inb, sizeof(uint32_t));
+
+ return d;
+}
+
+static char *flat_read_stringtable(struct inbuf *inb, int offset)
+{
+ const char *p;
+
+ p = inb->base + offset;
+ while (1) {
+ if (p >= inb->limit || p < inb->base)
+ die("String offset %d overruns string table\n",
+ offset);
+
+ if (*p == '\0')
+ break;
+
+ p++;
+ }
+
+ return strdup(inb->base + offset);
+}
+
+static struct property *flat_read_property(struct inbuf *dtbuf,
+ struct inbuf *strbuf, int flags)
+{
+ uint32_t proplen, stroff;
+ char *name;
+ struct data val;
+
+ proplen = flat_read_word(dtbuf);
+ stroff = flat_read_word(dtbuf);
+
+ name = flat_read_stringtable(strbuf, stroff);
+
+ if ((flags & FTF_VARALIGN) && (proplen >= 8))
+ flat_realign(dtbuf, 8);
+
+ val = flat_read_data(dtbuf, proplen);
+
+ return build_property(name, val, NULL);
+}
+
+
+static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
+{
+ struct reserve_info *reservelist = NULL;
+ struct reserve_info *new;
+ const char *p;
+ struct fdt_reserve_entry re;
+
+ /*
+ * Each entry is a pair of u64 (addr, size) values for 4 cell_t's.
+ * List terminates at an entry with size equal to zero.
+ *
+ * First pass, count entries.
+ */
+ p = inb->ptr;
+ while (1) {
+ flat_read_chunk(inb, &re, sizeof(re));
+ re.address = fdt64_to_cpu(re.address);
+ re.size = fdt64_to_cpu(re.size);
+ if (re.size == 0)
+ break;
+
+ new = build_reserve_entry(re.address, re.size, NULL);
+ reservelist = add_reserve_entry(reservelist, new);
+ }
+
+ return reservelist;
+}
+
+
+static char *nodename_from_path(const char *ppath, const char *cpath)
+{
+ int plen;
+
+ plen = strlen(ppath);
+
+ if (!strneq(ppath, cpath, plen))
+ die("Path \"%s\" is not valid as a child of \"%s\"\n",
+ cpath, ppath);
+
+ /* root node is a special case */
+ if (!streq(ppath, "/"))
+ plen++;
+
+ return strdup(cpath + plen);
+}
+
+static struct node *unflatten_tree(struct inbuf *dtbuf,
+ struct inbuf *strbuf,
+ const char *parent_flatname, int flags)
+{
+ struct node *node;
+ char *flatname;
+ uint32_t val;
+
+ node = build_node(NULL, NULL);
+
+ flatname = flat_read_string(dtbuf);
+
+ if (flags & FTF_FULLPATH)
+ node->name = nodename_from_path(parent_flatname, flatname);
+ else
+ node->name = flatname;
+
+ do {
+ struct property *prop;
+ struct node *child;
+
+ val = flat_read_word(dtbuf);
+ switch (val) {
+ case FDT_PROP:
+ if (node->children)
+ fprintf(stderr, "Warning: Flat tree input has "
+ "subnodes preceding a property.\n");
+ prop = flat_read_property(dtbuf, strbuf, flags);
+ add_property(node, prop);
+ break;
+
+ case FDT_BEGIN_NODE:
+ child = unflatten_tree(dtbuf,strbuf, flatname, flags);
+ add_child(node, child);
+ break;
+
+ case FDT_END_NODE:
+ break;
+
+ case FDT_END:
+ die("Premature FDT_END in device tree blob\n");
+ break;
+
+ case FDT_NOP:
+ if (!(flags & FTF_NOPS))
+ fprintf(stderr, "Warning: NOP tag found in flat tree"
+ " version <16\n");
+
+ /* Ignore */
+ break;
+
+ default:
+ die("Invalid opcode word %08x in device tree blob\n",
+ val);
+ }
+ } while (val != FDT_END_NODE);
+
+ return node;
+}
+
+
+struct boot_info *dt_from_blob(const char *fname)
+{
+ struct dtc_file *dtcf;
+ uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
+ uint32_t off_dt, off_str, off_mem_rsvmap;
+ int rc;
+ char *blob;
+ struct fdt_header *fdt;
+ char *p;
+ struct inbuf dtbuf, strbuf;
+ struct inbuf memresvbuf;
+ int sizeleft;
+ struct reserve_info *reservelist;
+ struct node *tree;
+ uint32_t val;
+ int flags = 0;
+
+ dtcf = dtc_open_file(fname, NULL);
+
+ rc = fread(&magic, sizeof(magic), 1, dtcf->file);
+ if (ferror(dtcf->file))
+ die("Error reading DT blob magic number: %s\n",
+ strerror(errno));
+ if (rc < 1) {
+ if (feof(dtcf->file))
+ die("EOF reading DT blob magic number\n");
+ else
+ die("Mysterious short read reading magic number\n");
+ }
+
+ magic = fdt32_to_cpu(magic);
+ if (magic != FDT_MAGIC)
+ die("Blob has incorrect magic number\n");
+
+ rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file);
+ if (ferror(dtcf->file))
+ die("Error reading DT blob size: %s\n", strerror(errno));
+ if (rc < 1) {
+ if (feof(dtcf->file))
+ die("EOF reading DT blob size\n");
+ else
+ die("Mysterious short read reading blob size\n");
+ }
+
+ totalsize = fdt32_to_cpu(totalsize);
+ if (totalsize < FDT_V1_SIZE)
+ die("DT blob size (%d) is too small\n", totalsize);
+
+ blob = xmalloc(totalsize);
+
+ fdt = (struct fdt_header *)blob;
+ fdt->magic = cpu_to_fdt32(magic);
+ fdt->totalsize = cpu_to_fdt32(totalsize);
+
+ sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
+ p = blob + sizeof(magic) + sizeof(totalsize);
+
+ while (sizeleft) {
+ if (feof(dtcf->file))
+ die("EOF before reading %d bytes of DT blob\n",
+ totalsize);
+
+ rc = fread(p, 1, sizeleft, dtcf->file);
+ if (ferror(dtcf->file))
+ die("Error reading DT blob: %s\n",
+ strerror(errno));
+
+ sizeleft -= rc;
+ p += rc;
+ }
+
+ off_dt = fdt32_to_cpu(fdt->off_dt_struct);
+ off_str = fdt32_to_cpu(fdt->off_dt_strings);
+ off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap);
+ version = fdt32_to_cpu(fdt->version);
+ boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys);
+
+ if (off_mem_rsvmap >= totalsize)
+ die("Mem Reserve structure offset exceeds total size\n");
+
+ if (off_dt >= totalsize)
+ die("DT structure offset exceeds total size\n");
+
+ if (off_str > totalsize)
+ die("String table offset exceeds total size\n");
+
+ if (version >= 3) {
+ uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings);
+ if (off_str+size_str > totalsize)
+ die("String table extends past total size\n");
+ inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
+ } else {
+ inbuf_init(&strbuf, blob + off_str, blob + totalsize);
+ }
+
+ if (version >= 17) {
+ size_dt = fdt32_to_cpu(fdt->size_dt_struct);
+ if (off_dt+size_dt > totalsize)
+ die("Structure block extends past total size\n");
+ }
+
+ if (version < 16) {
+ flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN;
+ } else {
+ flags |= FTF_NOPS;
+ }
+
+ inbuf_init(&memresvbuf,
+ blob + off_mem_rsvmap, blob + totalsize);
+ inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
+
+ reservelist = flat_read_mem_reserve(&memresvbuf);
+
+ val = flat_read_word(&dtbuf);
+
+ if (val != FDT_BEGIN_NODE)
+ die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val);
+
+ tree = unflatten_tree(&dtbuf, &strbuf, "", flags);
+
+ val = flat_read_word(&dtbuf);
+ if (val != FDT_END)
+ die("Device tree blob doesn't end with FDT_END\n");
+
+ free(blob);
+
+ dtc_close_file(dtcf);
+
+ return build_boot_info(reservelist, tree, boot_cpuid_phys);
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+#include <dirent.h>
+#include <sys/stat.h>
+
+static struct node *read_fstree(const char *dirname)
+{
+ DIR *d;
+ struct dirent *de;
+ struct stat st;
+ struct node *tree;
+
+ d = opendir(dirname);
+ if (!d)
+ die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
+
+ tree = build_node(NULL, NULL);
+
+ while ((de = readdir(d)) != NULL) {
+ char *tmpnam;
+
+ if (streq(de->d_name, ".")
+ || streq(de->d_name, ".."))
+ continue;
+
+ tmpnam = join_path(dirname, de->d_name);
+
+ if (lstat(tmpnam, &st) < 0)
+ die("stat(%s): %s\n", tmpnam, strerror(errno));
+
+ if (S_ISREG(st.st_mode)) {
+ struct property *prop;
+ FILE *pfile;
+
+ pfile = fopen(tmpnam, "r");
+ if (! pfile) {
+ fprintf(stderr,
+ "WARNING: Cannot open %s: %s\n",
+ tmpnam, strerror(errno));
+ } else {
+ prop = build_property(strdup(de->d_name),
+ data_copy_file(pfile,
+ st.st_size),
+ NULL);
+ add_property(tree, prop);
+ fclose(pfile);
+ }
+ } else if (S_ISDIR(st.st_mode)) {
+ struct node *newchild;
+
+ newchild = read_fstree(tmpnam);
+ newchild = name_node(newchild, strdup(de->d_name),
+ NULL);
+ add_child(tree, newchild);
+ }
+
+ free(tmpnam);
+ }
+
+ return tree;
+}
+
+struct boot_info *dt_from_fs(const char *dirname)
+{
+ struct node *tree;
+
+ tree = read_fstree(dirname);
+ tree = name_node(tree, "", NULL);
+
+ return build_boot_info(NULL, tree, 0);
+}
+
--- /dev/null
+# Makefile.libfdt
+#
+# This is not a complete Makefile of itself. Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+LIBFDT_INCLUDES = fdt.h libfdt.h
+LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_check_header(const void *fdt)
+{
+ if (fdt_magic(fdt) == FDT_MAGIC) {
+ /* Complete tree */
+ if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+ return -FDT_ERR_BADVERSION;
+ if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
+ return -FDT_ERR_BADVERSION;
+ } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
+ /* Unfinished sequential-write blob */
+ if (fdt_size_dt_struct(fdt) == 0)
+ return -FDT_ERR_BADSTATE;
+ } else {
+ return -FDT_ERR_BADMAGIC;
+ }
+
+ return 0;
+}
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int len)
+{
+ const char *p;
+
+ if (fdt_version(fdt) >= 0x11)
+ if (((offset + len) < offset)
+ || ((offset + len) > fdt_size_dt_struct(fdt)))
+ return NULL;
+
+ p = _fdt_offset_ptr(fdt, offset);
+
+ if (p + len < p)
+ return NULL;
+ return p;
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
+{
+ const uint32_t *tagp, *lenp;
+ uint32_t tag;
+ const char *p;
+
+ if (offset % FDT_TAGSIZE)
+ return -1;
+
+ tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
+ if (! tagp)
+ return FDT_END; /* premature end */
+ tag = fdt32_to_cpu(*tagp);
+ offset += FDT_TAGSIZE;
+
+ switch (tag) {
+ case FDT_BEGIN_NODE:
+ /* skip name */
+ do {
+ p = fdt_offset_ptr(fdt, offset++, 1);
+ } while (p && (*p != '\0'));
+ if (! p)
+ return FDT_END;
+ break;
+ case FDT_PROP:
+ lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
+ if (! lenp)
+ return FDT_END;
+ /* skip name offset, length and value */
+ offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
+ break;
+ }
+
+ if (nextoffset)
+ *nextoffset = FDT_TAGALIGN(offset);
+
+ return tag;
+}
+
+int _fdt_check_node_offset(const void *fdt, int offset)
+{
+ if ((offset < 0) || (offset % FDT_TAGSIZE)
+ || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
+ return -FDT_ERR_BADOFFSET;
+
+ return offset;
+}
+
+int fdt_next_node(const void *fdt, int offset, int *depth)
+{
+ int nextoffset = 0;
+ uint32_t tag;
+
+ if (offset >= 0)
+ if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
+ return nextoffset;
+
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_PROP:
+ case FDT_NOP:
+ break;
+
+ case FDT_BEGIN_NODE:
+ if (depth)
+ (*depth)++;
+ break;
+
+ case FDT_END_NODE:
+ if (depth)
+ (*depth)--;
+ break;
+
+ case FDT_END:
+ return -FDT_ERR_NOTFOUND;
+
+ default:
+ return -FDT_ERR_BADSTRUCTURE;
+ }
+ } while (tag != FDT_BEGIN_NODE);
+
+ return offset;
+}
+
+const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
+{
+ int len = strlen(s) + 1;
+ const char *last = strtab + tabsize - len;
+ const char *p;
+
+ for (p = strtab; p <= last; p++)
+ if (memcmp(p, s, len) == 0)
+ return p;
+ return NULL;
+}
+
+int fdt_move(const void *fdt, void *buf, int bufsize)
+{
+ FDT_CHECK_HEADER(fdt);
+
+ if (fdt_totalsize(fdt) > bufsize)
+ return -FDT_ERR_NOSPACE;
+
+ memmove(buf, fdt, fdt_totalsize(fdt));
+ return 0;
+}
--- /dev/null
+#ifndef _FDT_H
+#define _FDT_H
+
+#ifndef __ASSEMBLY__
+
+struct fdt_header {
+ uint32_t magic; /* magic word FDT_MAGIC */
+ uint32_t totalsize; /* total size of DT block */
+ uint32_t off_dt_struct; /* offset to structure */
+ uint32_t off_dt_strings; /* offset to strings */
+ uint32_t off_mem_rsvmap; /* offset to memory reserve map */
+ uint32_t version; /* format version */
+ uint32_t last_comp_version; /* last compatible version */
+
+ /* version 2 fields below */
+ uint32_t boot_cpuid_phys; /* Which physical CPU id we're
+ booting on */
+ /* version 3 fields below */
+ uint32_t size_dt_strings; /* size of the strings block */
+
+ /* version 17 fields below */
+ uint32_t size_dt_struct; /* size of the structure block */
+};
+
+struct fdt_reserve_entry {
+ uint64_t address;
+ uint64_t size;
+};
+
+struct fdt_node_header {
+ uint32_t tag;
+ char name[0];
+};
+
+struct fdt_property {
+ uint32_t tag;
+ uint32_t len;
+ uint32_t nameoff;
+ char data[0];
+};
+
+#endif /* !__ASSEMBLY */
+
+#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
+#define FDT_TAGSIZE sizeof(uint32_t)
+
+#define FDT_BEGIN_NODE 0x1 /* Start node: full name */
+#define FDT_END_NODE 0x2 /* End node */
+#define FDT_PROP 0x3 /* Property: name off,
+ size, content */
+#define FDT_NOP 0x4 /* nop */
+#define FDT_END 0x9
+
+#define FDT_V1_SIZE (7*sizeof(uint32_t))
+#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t))
+#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t))
+#define FDT_V16_SIZE FDT_V3_SIZE
+#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t))
+
+#endif /* _FDT_H */
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _fdt_nodename_eq(const void *fdt, int offset,
+ const char *s, int len)
+{
+ const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
+
+ if (! p)
+ /* short match */
+ return 0;
+
+ if (memcmp(p, s, len) != 0)
+ return 0;
+
+ if (p[len] == '\0')
+ return 1;
+ else if (!memchr(s, '@', len) && (p[len] == '@'))
+ return 1;
+ else
+ return 0;
+}
+
+const char *fdt_string(const void *fdt, int stroffset)
+{
+ return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
+}
+
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
+{
+ FDT_CHECK_HEADER(fdt);
+ *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
+ *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
+ return 0;
+}
+
+int fdt_num_mem_rsv(const void *fdt)
+{
+ int i = 0;
+
+ while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0)
+ i++;
+ return i;
+}
+
+int fdt_subnode_offset_namelen(const void *fdt, int offset,
+ const char *name, int namelen)
+{
+ int depth;
+
+ FDT_CHECK_HEADER(fdt);
+
+ for (depth = 0, offset = fdt_next_node(fdt, offset, &depth);
+ (offset >= 0) && (depth > 0);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth < 0)
+ return -FDT_ERR_NOTFOUND;
+ else if ((depth == 1)
+ && _fdt_nodename_eq(fdt, offset, name, namelen))
+ return offset;
+ }
+
+ if (offset < 0)
+ return offset; /* error */
+ else
+ return -FDT_ERR_NOTFOUND;
+}
+
+int fdt_subnode_offset(const void *fdt, int parentoffset,
+ const char *name)
+{
+ return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_path_offset(const void *fdt, const char *path)
+{
+ const char *end = path + strlen(path);
+ const char *p = path;
+ int offset = 0;
+
+ FDT_CHECK_HEADER(fdt);
+
+ if (*path != '/')
+ return -FDT_ERR_BADPATH;
+
+ while (*p) {
+ const char *q;
+
+ while (*p == '/')
+ p++;
+ if (! *p)
+ return offset;
+ q = strchr(p, '/');
+ if (! q)
+ q = end;
+
+ offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
+ if (offset < 0)
+ return offset;
+
+ p = q;
+ }
+
+ return offset;
+}
+
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
+{
+ const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset);
+ int err;
+
+ if (((err = fdt_check_header(fdt)) != 0)
+ || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+ goto fail;
+
+ if (len)
+ *len = strlen(nh->name);
+
+ return nh->name;
+
+ fail:
+ if (len)
+ *len = err;
+ return NULL;
+}
+
+const struct fdt_property *fdt_get_property(const void *fdt,
+ int nodeoffset,
+ const char *name, int *lenp)
+{
+ uint32_t tag;
+ const struct fdt_property *prop;
+ int namestroff;
+ int offset, nextoffset;
+ int err;
+
+ if (((err = fdt_check_header(fdt)) != 0)
+ || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+ goto fail;
+
+ nextoffset = err;
+ do {
+ offset = nextoffset;
+
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+ switch (tag) {
+ case FDT_END:
+ err = -FDT_ERR_TRUNCATED;
+ goto fail;
+
+ case FDT_BEGIN_NODE:
+ case FDT_END_NODE:
+ case FDT_NOP:
+ break;
+
+ case FDT_PROP:
+ err = -FDT_ERR_BADSTRUCTURE;
+ prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
+ if (! prop)
+ goto fail;
+ namestroff = fdt32_to_cpu(prop->nameoff);
+ if (strcmp(fdt_string(fdt, namestroff), name) == 0) {
+ /* Found it! */
+ int len = fdt32_to_cpu(prop->len);
+ prop = fdt_offset_ptr(fdt, offset,
+ sizeof(*prop)+len);
+ if (! prop)
+ goto fail;
+
+ if (lenp)
+ *lenp = len;
+
+ return prop;
+ }
+ break;
+
+ default:
+ err = -FDT_ERR_BADSTRUCTURE;
+ goto fail;
+ }
+ } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
+
+ err = -FDT_ERR_NOTFOUND;
+ fail:
+ if (lenp)
+ *lenp = err;
+ return NULL;
+}
+
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+ const char *name, int *lenp)
+{
+ const struct fdt_property *prop;
+
+ prop = fdt_get_property(fdt, nodeoffset, name, lenp);
+ if (! prop)
+ return NULL;
+
+ return prop->data;
+}
+
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
+{
+ const uint32_t *php;
+ int len;
+
+ php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
+ if (!php || (len != sizeof(*php)))
+ return 0;
+
+ return fdt32_to_cpu(*php);
+}
+
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
+{
+ int pdepth = 0, p = 0;
+ int offset, depth, namelen;
+ const char *name;
+
+ FDT_CHECK_HEADER(fdt);
+
+ if (buflen < 2)
+ return -FDT_ERR_NOSPACE;
+
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (pdepth < depth)
+ continue; /* overflowed buffer */
+
+ while (pdepth > depth) {
+ do {
+ p--;
+ } while (buf[p-1] != '/');
+ pdepth--;
+ }
+
+ name = fdt_get_name(fdt, offset, &namelen);
+ if (!name)
+ return namelen;
+ if ((p + namelen + 1) <= buflen) {
+ memcpy(buf + p, name, namelen);
+ p += namelen;
+ buf[p++] = '/';
+ pdepth++;
+ }
+
+ if (offset == nodeoffset) {
+ if (pdepth < (depth + 1))
+ return -FDT_ERR_NOSPACE;
+
+ if (p > 1) /* special case so that root path is "/", not "" */
+ p--;
+ buf[p] = '\0';
+ return p;
+ }
+ }
+
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+ int supernodedepth, int *nodedepth)
+{
+ int offset, depth;
+ int supernodeoffset = -FDT_ERR_INTERNAL;
+
+ FDT_CHECK_HEADER(fdt);
+
+ if (supernodedepth < 0)
+ return -FDT_ERR_NOTFOUND;
+
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth == supernodedepth)
+ supernodeoffset = offset;
+
+ if (offset == nodeoffset) {
+ if (nodedepth)
+ *nodedepth = depth;
+
+ if (supernodedepth > depth)
+ return -FDT_ERR_NOTFOUND;
+ else
+ return supernodeoffset;
+ }
+ }
+
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_node_depth(const void *fdt, int nodeoffset)
+{
+ int nodedepth;
+ int err;
+
+ err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
+ if (err)
+ return (err < 0) ? err : -FDT_ERR_INTERNAL;
+ return nodedepth;
+}
+
+int fdt_parent_offset(const void *fdt, int nodeoffset)
+{
+ int nodedepth = fdt_node_depth(fdt, nodeoffset);
+
+ if (nodedepth < 0)
+ return nodedepth;
+ return fdt_supernode_atdepth_offset(fdt, nodeoffset,
+ nodedepth - 1, NULL);
+}
+
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+ const char *propname,
+ const void *propval, int proplen)
+{
+ int offset;
+ const void *val;
+ int len;
+
+ FDT_CHECK_HEADER(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we scan each
+ * property of a node in fdt_getprop(), then if that didn't
+ * find what we want, we scan over them again making our way
+ * to the next node. Still it's the easiest to implement
+ * approach; performance can come later. */
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ val = fdt_getprop(fdt, offset, propname, &len);
+ if (val && (len == proplen)
+ && (memcmp(val, propval, len) == 0))
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
+{
+ if ((phandle == 0) || (phandle == -1))
+ return -FDT_ERR_BADPHANDLE;
+ phandle = cpu_to_fdt32(phandle);
+ return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle",
+ &phandle, sizeof(phandle));
+}
+
+int _stringlist_contains(const char *strlist, int listlen, const char *str)
+{
+ int len = strlen(str);
+ const char *p;
+
+ while (listlen >= len) {
+ if (memcmp(str, strlist, len+1) == 0)
+ return 1;
+ p = memchr(strlist, '\0', listlen);
+ if (!p)
+ return 0; /* malformed strlist.. */
+ listlen -= (p-strlist) + 1;
+ strlist = p + 1;
+ }
+ return 0;
+}
+
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+ const char *compatible)
+{
+ const void *prop;
+ int len;
+
+ prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
+ if (!prop)
+ return len;
+ if (_stringlist_contains(prop, len, compatible))
+ return 0;
+ else
+ return 1;
+}
+
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+ const char *compatible)
+{
+ int offset, err;
+
+ FDT_CHECK_HEADER(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we scan each
+ * property of a node in fdt_node_check_compatible(), then if
+ * that didn't find what we want, we scan over them again
+ * making our way to the next node. Still it's the easiest to
+ * implement approach; performance can come later. */
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ err = fdt_node_check_compatible(fdt, offset, compatible);
+ if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
+ return err;
+ else if (err == 0)
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _fdt_blocks_misordered(const void *fdt,
+ int mem_rsv_size, int struct_size)
+{
+ return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
+ || (fdt_off_dt_struct(fdt) <
+ (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
+ || (fdt_off_dt_strings(fdt) <
+ (fdt_off_dt_struct(fdt) + struct_size))
+ || (fdt_totalsize(fdt) <
+ (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
+}
+
+static int _fdt_rw_check_header(void *fdt)
+{
+ FDT_CHECK_HEADER(fdt);
+
+ if (fdt_version(fdt) < 17)
+ return -FDT_ERR_BADVERSION;
+ if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
+ fdt_size_dt_struct(fdt)))
+ return -FDT_ERR_BADLAYOUT;
+ if (fdt_version(fdt) > 17)
+ fdt_set_version(fdt, 17);
+
+ return 0;
+}
+
+#define FDT_RW_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = _fdt_rw_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+static inline int _fdt_data_size(void *fdt)
+{
+ return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+}
+
+static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen)
+{
+ char *p = splicepoint;
+ char *end = (char *)fdt + _fdt_data_size(fdt);
+
+ if (((p + oldlen) < p) || ((p + oldlen) > end))
+ return -FDT_ERR_BADOFFSET;
+ if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
+ return -FDT_ERR_NOSPACE;
+ memmove(p + newlen, p + oldlen, end - p - oldlen);
+ return 0;
+}
+
+static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
+ int oldn, int newn)
+{
+ int delta = (newn - oldn) * sizeof(*p);
+ int err;
+ err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+ if (err)
+ return err;
+ fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
+ fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+ return 0;
+}
+
+static int _fdt_splice_struct(void *fdt, void *p,
+ int oldlen, int newlen)
+{
+ int delta = newlen - oldlen;
+ int err;
+
+ if ((err = _fdt_splice(fdt, p, oldlen, newlen)))
+ return err;
+
+ fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
+ fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+ return 0;
+}
+
+static int _fdt_splice_string(void *fdt, int newlen)
+{
+ void *p = (char *)fdt
+ + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+ int err;
+
+ if ((err = _fdt_splice(fdt, p, 0, newlen)))
+ return err;
+
+ fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
+ return 0;
+}
+
+static int _fdt_find_add_string(void *fdt, const char *s)
+{
+ char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
+ const char *p;
+ char *new;
+ int len = strlen(s) + 1;
+ int err;
+
+ p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s);
+ if (p)
+ /* found it */
+ return (p - strtab);
+
+ new = strtab + fdt_size_dt_strings(fdt);
+ err = _fdt_splice_string(fdt, len);
+ if (err)
+ return err;
+
+ memcpy(new, s, len);
+ return (new - strtab);
+}
+
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
+ err = _fdt_splice_mem_rsv(fdt, re, 0, 1);
+ if (err)
+ return err;
+
+ re->address = cpu_to_fdt64(address);
+ re->size = cpu_to_fdt64(size);
+ return 0;
+}
+
+int fdt_del_mem_rsv(void *fdt, int n)
+{
+ struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ if (n >= fdt_num_mem_rsv(fdt))
+ return -FDT_ERR_NOTFOUND;
+
+ err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
+ if (err)
+ return err;
+ return 0;
+}
+
+static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
+{
+ int oldlen;
+ int err;
+
+ *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+ if (! (*prop))
+ return oldlen;
+
+ if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
+ FDT_TAGALIGN(len))))
+ return err;
+
+ (*prop)->len = cpu_to_fdt32(len);
+ return 0;
+}
+
+static int _fdt_add_property(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
+{
+ int proplen;
+ int nextoffset;
+ int namestroff;
+ int err;
+
+ if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0)
+ return nextoffset;
+
+ namestroff = _fdt_find_add_string(fdt, name);
+ if (namestroff < 0)
+ return namestroff;
+
+ *prop = _fdt_offset_ptr_w(fdt, nextoffset);
+ proplen = sizeof(**prop) + FDT_TAGALIGN(len);
+
+ err = _fdt_splice_struct(fdt, *prop, 0, proplen);
+ if (err)
+ return err;
+
+ (*prop)->tag = cpu_to_fdt32(FDT_PROP);
+ (*prop)->nameoff = cpu_to_fdt32(namestroff);
+ (*prop)->len = cpu_to_fdt32(len);
+ return 0;
+}
+
+int fdt_set_name(void *fdt, int nodeoffset, const char *name)
+{
+ char *namep;
+ int oldlen, newlen;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
+ if (!namep)
+ return oldlen;
+
+ newlen = strlen(name);
+
+ err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1),
+ FDT_TAGALIGN(newlen+1));
+ if (err)
+ return err;
+
+ memcpy(namep, name, newlen+1);
+ return 0;
+}
+
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ struct fdt_property *prop;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop);
+ if (err == -FDT_ERR_NOTFOUND)
+ err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
+ if (err)
+ return err;
+
+ memcpy(prop->data, val, len);
+ return 0;
+}
+
+int fdt_delprop(void *fdt, int nodeoffset, const char *name)
+{
+ struct fdt_property *prop;
+ int len, proplen;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+ if (! prop)
+ return len;
+
+ proplen = sizeof(*prop) + FDT_TAGALIGN(len);
+ return _fdt_splice_struct(fdt, prop, proplen, 0);
+}
+
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+ const char *name, int namelen)
+{
+ struct fdt_node_header *nh;
+ int offset, nextoffset;
+ int nodelen;
+ int err;
+ uint32_t tag;
+ uint32_t *endtag;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
+ if (offset >= 0)
+ return -FDT_ERR_EXISTS;
+ else if (offset != -FDT_ERR_NOTFOUND)
+ return offset;
+
+ /* Try to place the new node after the parent's properties */
+ fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+ } while ((tag == FDT_PROP) || (tag == FDT_NOP));
+
+ nh = _fdt_offset_ptr_w(fdt, offset);
+ nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
+
+ err = _fdt_splice_struct(fdt, nh, 0, nodelen);
+ if (err)
+ return err;
+
+ nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+ memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
+ memcpy(nh->name, name, namelen);
+ endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
+ *endtag = cpu_to_fdt32(FDT_END_NODE);
+
+ return offset;
+}
+
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name)
+{
+ return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_del_node(void *fdt, int nodeoffset)
+{
+ int endoffset;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ endoffset = _fdt_node_end_offset(fdt, nodeoffset);
+ if (endoffset < 0)
+ return endoffset;
+
+ return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
+ endoffset - nodeoffset, 0);
+}
+
+static void _fdt_packblocks(const char *old, char *new,
+ int mem_rsv_size, int struct_size)
+{
+ int mem_rsv_off, struct_off, strings_off;
+
+ mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
+ struct_off = mem_rsv_off + mem_rsv_size;
+ strings_off = struct_off + struct_size;
+
+ memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
+ fdt_set_off_mem_rsvmap(new, mem_rsv_off);
+
+ memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
+ fdt_set_off_dt_struct(new, struct_off);
+ fdt_set_size_dt_struct(new, struct_size);
+
+ memmove(new + strings_off, old + fdt_off_dt_strings(old),
+ fdt_size_dt_strings(old));
+ fdt_set_off_dt_strings(new, strings_off);
+ fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
+}
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize)
+{
+ int err;
+ int mem_rsv_size, struct_size;
+ int newsize;
+ const char *fdtstart = fdt;
+ const char *fdtend = fdtstart + fdt_totalsize(fdt);
+ char *tmp;
+
+ FDT_CHECK_HEADER(fdt);
+
+ mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+ * sizeof(struct fdt_reserve_entry);
+
+ if (fdt_version(fdt) >= 17) {
+ struct_size = fdt_size_dt_struct(fdt);
+ } else {
+ struct_size = 0;
+ while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
+ ;
+ }
+
+ if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
+ /* no further work necessary */
+ err = fdt_move(fdt, buf, bufsize);
+ if (err)
+ return err;
+ fdt_set_version(buf, 17);
+ fdt_set_size_dt_struct(buf, struct_size);
+ fdt_set_totalsize(buf, bufsize);
+ return 0;
+ }
+
+ /* Need to reorder */
+ newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+ + struct_size + fdt_size_dt_strings(fdt);
+
+ if (bufsize < newsize)
+ return -FDT_ERR_NOSPACE;
+
+ /* First attempt to build converted tree at beginning of buffer */
+ tmp = buf;
+ /* But if that overlaps with the old tree... */
+ if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
+ /* Try right after the old tree instead */
+ tmp = (char *)(uintptr_t)fdtend;
+ if ((tmp + newsize) > ((char *)buf + bufsize))
+ return -FDT_ERR_NOSPACE;
+ }
+
+ _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size);
+ memmove(buf, tmp, newsize);
+
+ fdt_set_magic(buf, FDT_MAGIC);
+ fdt_set_totalsize(buf, bufsize);
+ fdt_set_version(buf, 17);
+ fdt_set_last_comp_version(buf, 16);
+ fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
+
+ return 0;
+}
+
+int fdt_pack(void *fdt)
+{
+ int mem_rsv_size;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+ * sizeof(struct fdt_reserve_entry);
+ _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+ fdt_set_totalsize(fdt, _fdt_data_size(fdt));
+
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+struct fdt_errtabent {
+ const char *str;
+};
+
+#define FDT_ERRTABENT(val) \
+ [(val)] = { .str = #val, }
+
+static struct fdt_errtabent fdt_errtable[] = {
+ FDT_ERRTABENT(FDT_ERR_NOTFOUND),
+ FDT_ERRTABENT(FDT_ERR_EXISTS),
+ FDT_ERRTABENT(FDT_ERR_NOSPACE),
+
+ FDT_ERRTABENT(FDT_ERR_BADOFFSET),
+ FDT_ERRTABENT(FDT_ERR_BADPATH),
+ FDT_ERRTABENT(FDT_ERR_BADSTATE),
+
+ FDT_ERRTABENT(FDT_ERR_TRUNCATED),
+ FDT_ERRTABENT(FDT_ERR_BADMAGIC),
+ FDT_ERRTABENT(FDT_ERR_BADVERSION),
+ FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
+ FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
+};
+#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
+
+const char *fdt_strerror(int errval)
+{
+ if (errval > 0)
+ return "<valid offset/length>";
+ else if (errval == 0)
+ return "<no error>";
+ else if (errval > -FDT_ERRTABSIZE) {
+ const char *s = fdt_errtable[-errval].str;
+
+ if (s)
+ return s;
+ }
+
+ return "<unknown error>";
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _fdt_sw_check_header(void *fdt)
+{
+ if (fdt_magic(fdt) != FDT_SW_MAGIC)
+ return -FDT_ERR_BADMAGIC;
+ /* FIXME: should check more details about the header state */
+ return 0;
+}
+
+#define FDT_SW_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = _fdt_sw_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+static void *_fdt_grab_space(void *fdt, int len)
+{
+ int offset = fdt_size_dt_struct(fdt);
+ int spaceleft;
+
+ spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
+ - fdt_size_dt_strings(fdt);
+
+ if ((offset + len < offset) || (offset + len > spaceleft))
+ return NULL;
+
+ fdt_set_size_dt_struct(fdt, offset + len);
+ return fdt_offset_ptr_w(fdt, offset, len);
+}
+
+int fdt_create(void *buf, int bufsize)
+{
+ void *fdt = buf;
+
+ if (bufsize < sizeof(struct fdt_header))
+ return -FDT_ERR_NOSPACE;
+
+ memset(buf, 0, bufsize);
+
+ fdt_set_magic(fdt, FDT_SW_MAGIC);
+ fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
+ fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
+ fdt_set_totalsize(fdt, bufsize);
+
+ fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
+ sizeof(struct fdt_reserve_entry)));
+ fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
+ fdt_set_off_dt_strings(fdt, bufsize);
+
+ return 0;
+}
+
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int offset;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ if (fdt_size_dt_struct(fdt))
+ return -FDT_ERR_BADSTATE;
+
+ offset = fdt_off_dt_struct(fdt);
+ if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
+ return -FDT_ERR_NOSPACE;
+
+ re = (struct fdt_reserve_entry *)((char *)fdt + offset);
+ re->address = cpu_to_fdt64(addr);
+ re->size = cpu_to_fdt64(size);
+
+ fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
+
+ return 0;
+}
+
+int fdt_finish_reservemap(void *fdt)
+{
+ return fdt_add_reservemap_entry(fdt, 0, 0);
+}
+
+int fdt_begin_node(void *fdt, const char *name)
+{
+ struct fdt_node_header *nh;
+ int namelen = strlen(name) + 1;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
+ if (! nh)
+ return -FDT_ERR_NOSPACE;
+
+ nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+ memcpy(nh->name, name, namelen);
+ return 0;
+}
+
+int fdt_end_node(void *fdt)
+{
+ uint32_t *en;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ en = _fdt_grab_space(fdt, FDT_TAGSIZE);
+ if (! en)
+ return -FDT_ERR_NOSPACE;
+
+ *en = cpu_to_fdt32(FDT_END_NODE);
+ return 0;
+}
+
+static int _fdt_find_add_string(void *fdt, const char *s)
+{
+ char *strtab = (char *)fdt + fdt_totalsize(fdt);
+ const char *p;
+ int strtabsize = fdt_size_dt_strings(fdt);
+ int len = strlen(s) + 1;
+ int struct_top, offset;
+
+ p = _fdt_find_string(strtab - strtabsize, strtabsize, s);
+ if (p)
+ return p - strtab;
+
+ /* Add it */
+ offset = -strtabsize - len;
+ struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ if (fdt_totalsize(fdt) + offset < struct_top)
+ return 0; /* no more room :( */
+
+ memcpy(strtab + offset, s, len);
+ fdt_set_size_dt_strings(fdt, strtabsize + len);
+ return offset;
+}
+
+int fdt_property(void *fdt, const char *name, const void *val, int len)
+{
+ struct fdt_property *prop;
+ int nameoff;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ nameoff = _fdt_find_add_string(fdt, name);
+ if (nameoff == 0)
+ return -FDT_ERR_NOSPACE;
+
+ prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
+ if (! prop)
+ return -FDT_ERR_NOSPACE;
+
+ prop->tag = cpu_to_fdt32(FDT_PROP);
+ prop->nameoff = cpu_to_fdt32(nameoff);
+ prop->len = cpu_to_fdt32(len);
+ memcpy(prop->data, val, len);
+ return 0;
+}
+
+int fdt_finish(void *fdt)
+{
+ char *p = (char *)fdt;
+ uint32_t *end;
+ int oldstroffset, newstroffset;
+ uint32_t tag;
+ int offset, nextoffset;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ /* Add terminator */
+ end = _fdt_grab_space(fdt, sizeof(*end));
+ if (! end)
+ return -FDT_ERR_NOSPACE;
+ *end = cpu_to_fdt32(FDT_END);
+
+ /* Relocate the string table */
+ oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
+ newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
+ fdt_set_off_dt_strings(fdt, newstroffset);
+
+ /* Walk the structure, correcting string offsets */
+ offset = 0;
+ while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
+ if (tag == FDT_PROP) {
+ struct fdt_property *prop =
+ fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
+ int nameoff;
+
+ if (! prop)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ nameoff = fdt32_to_cpu(prop->nameoff);
+ nameoff += fdt_size_dt_strings(fdt);
+ prop->nameoff = cpu_to_fdt32(nameoff);
+ }
+ offset = nextoffset;
+ }
+
+ /* Finally, adjust the header */
+ fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
+ fdt_set_magic(fdt, FDT_MAGIC);
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ void *propval;
+ int proplen;
+
+ propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
+ if (! propval)
+ return proplen;
+
+ if (proplen != len)
+ return -FDT_ERR_NOSPACE;
+
+ memcpy(propval, val, len);
+ return 0;
+}
+
+static void _fdt_nop_region(void *start, int len)
+{
+ uint32_t *p;
+
+ for (p = start; (char *)p < ((char *)start + len); p++)
+ *p = cpu_to_fdt32(FDT_NOP);
+}
+
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
+{
+ struct fdt_property *prop;
+ int len;
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+ if (! prop)
+ return len;
+
+ _fdt_nop_region(prop, len + sizeof(*prop));
+
+ return 0;
+}
+
+int _fdt_node_end_offset(void *fdt, int nodeoffset)
+{
+ int level = 0;
+ uint32_t tag;
+ int offset, nextoffset;
+
+ tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
+ if (tag != FDT_BEGIN_NODE)
+ return -FDT_ERR_BADOFFSET;
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_END:
+ return offset;
+
+ case FDT_BEGIN_NODE:
+ level++;
+ break;
+
+ case FDT_END_NODE:
+ level--;
+ break;
+
+ case FDT_PROP:
+ case FDT_NOP:
+ break;
+
+ default:
+ return -FDT_ERR_BADSTRUCTURE;
+ }
+ } while (level >= 0);
+
+ return nextoffset;
+}
+
+int fdt_nop_node(void *fdt, int nodeoffset)
+{
+ int endoffset;
+
+ endoffset = _fdt_node_end_offset(fdt, nodeoffset);
+ if (endoffset < 0)
+ return endoffset;
+
+ _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0),
+ endoffset - nodeoffset);
+ return 0;
+}
--- /dev/null
+#ifndef _LIBFDT_H
+#define _LIBFDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define FDT_FIRST_SUPPORTED_VERSION 0x10
+#define FDT_LAST_SUPPORTED_VERSION 0x11
+
+/* Error codes: informative error codes */
+#define FDT_ERR_NOTFOUND 1
+ /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
+#define FDT_ERR_EXISTS 2
+ /* FDT_ERR_EXISTS: Attemped to create a node or property which
+ * already exists */
+#define FDT_ERR_NOSPACE 3
+ /* FDT_ERR_NOSPACE: Operation needed to expand the device
+ * tree, but its buffer did not have sufficient space to
+ * contain the expanded tree. Use fdt_open_into() to move the
+ * device tree to a buffer with more space. */
+
+/* Error codes: codes for bad parameters */
+#define FDT_ERR_BADOFFSET 4
+ /* FDT_ERR_BADOFFSET: Function was passed a structure block
+ * offset which is out-of-bounds, or which points to an
+ * unsuitable part of the structure for the operation. */
+#define FDT_ERR_BADPATH 5
+ /* FDT_ERR_BADPATH: Function was passed a badly formatted path
+ * (e.g. missing a leading / for a function which requires an
+ * absolute path) */
+#define FDT_ERR_BADPHANDLE 6
+ /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
+ * value. phandle values of 0 and -1 are not permitted. */
+#define FDT_ERR_BADSTATE 7
+ /* FDT_ERR_BADSTATE: Function was passed an incomplete device
+ * tree created by the sequential-write functions, which is
+ * not sufficiently complete for the requested operation. */
+
+/* Error codes: codes for bad device tree blobs */
+#define FDT_ERR_TRUNCATED 8
+ /* FDT_ERR_TRUNCATED: Structure block of the given device tree
+ * ends without an FDT_END tag. */
+#define FDT_ERR_BADMAGIC 9
+ /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
+ * device tree at all - it is missing the flattened device
+ * tree magic number. */
+#define FDT_ERR_BADVERSION 10
+ /* FDT_ERR_BADVERSION: Given device tree has a version which
+ * can't be handled by the requested operation. For
+ * read-write functions, this may mean that fdt_open_into() is
+ * required to convert the tree to the expected version. */
+#define FDT_ERR_BADSTRUCTURE 11
+ /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
+ * structure block or other serious error (e.g. misnested
+ * nodes, or subnodes preceding properties). */
+#define FDT_ERR_BADLAYOUT 12
+ /* FDT_ERR_BADLAYOUT: For read-write functions, the given
+ * device tree has it's sub-blocks in an order that the
+ * function can't handle (memory reserve map, then structure,
+ * then strings). Use fdt_open_into() to reorganize the tree
+ * into a form suitable for the read-write operations. */
+
+/* "Can't happen" error indicating a bug in libfdt */
+#define FDT_ERR_INTERNAL 13
+ /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
+ * Should never be returned, if it is, it indicates a bug in
+ * libfdt itself. */
+
+#define FDT_ERR_MAX 13
+
+/**********************************************************************/
+/* Low-level functions (you probably don't need these) */
+/**********************************************************************/
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
+{
+ return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
+
+/**********************************************************************/
+/* Traversal functions */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**********************************************************************/
+/* General functions */
+/**********************************************************************/
+
+#define fdt_get_header(fdt, field) \
+ (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
+#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
+#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
+#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
+#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
+#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
+#define fdt_version(fdt) (fdt_get_header(fdt, version))
+#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
+#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
+
+#define __fdt_set_hdr(name) \
+ static inline void fdt_set_##name(void *fdt, uint32_t val) \
+ { \
+ struct fdt_header *fdth = fdt; \
+ fdth->name = cpu_to_fdt32(val); \
+ }
+__fdt_set_hdr(magic);
+__fdt_set_hdr(totalsize);
+__fdt_set_hdr(off_dt_struct);
+__fdt_set_hdr(off_dt_strings);
+__fdt_set_hdr(off_mem_rsvmap);
+__fdt_set_hdr(version);
+__fdt_set_hdr(last_comp_version);
+__fdt_set_hdr(boot_cpuid_phys);
+__fdt_set_hdr(size_dt_strings);
+__fdt_set_hdr(size_dt_struct);
+#undef __fdt_set_hdr
+
+/**
+ * fdt_check_header - sanity check a device tree or possible device tree
+ * @fdt: pointer to data which might be a flattened device tree
+ *
+ * fdt_check_header() checks that the given buffer contains what
+ * appears to be a flattened device tree with sane information in its
+ * header.
+ *
+ * returns:
+ * 0, if the buffer appears to contain a valid device tree
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings, as above
+ */
+int fdt_check_header(const void *fdt);
+
+/**
+ * fdt_move - move a device tree around in memory
+ * @fdt: pointer to the device tree to move
+ * @buf: pointer to memory where the device is to be moved
+ * @bufsize: size of the memory space at buf
+ *
+ * fdt_move() relocates, if possible, the device tree blob located at
+ * fdt to the buffer at buf of size bufsize. The buffer may overlap
+ * with the existing device tree blob at fdt. Therefore,
+ * fdt_move(fdt, fdt, fdt_totalsize(fdt))
+ * should always succeed.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_move(const void *fdt, void *buf, int bufsize);
+
+/**********************************************************************/
+/* Read-only functions */
+/**********************************************************************/
+
+/**
+ * fdt_string - retrieve a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ *
+ * fdt_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt.
+ *
+ * returns:
+ * a pointer to the string, on success
+ * NULL, if stroffset is out of bounds
+ */
+const char *fdt_string(const void *fdt, int stroffset);
+
+/**
+ * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
+ * @fdt: pointer to the device tree blob
+ *
+ * Returns the number of entries in the device tree blob's memory
+ * reservation map. This does not include the terminating 0,0 entry
+ * or any other (0,0) entries reserved for expansion.
+ *
+ * returns:
+ * the number of entries
+ */
+int fdt_num_mem_rsv(const void *fdt);
+
+/**
+ * fdt_get_mem_rsv - retrieve one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: pointers to 64-bit variables
+ *
+ * On success, *address and *size will contain the address and size of
+ * the n-th reserve map entry from the device tree blob, in
+ * native-endian format.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
+
+/**
+ * fdt_subnode_offset_namelen - find a subnode based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_subnode_offset(), but only examine the first
+ * namelen characters of name for matching the subnode name. This is
+ * useful for finding subnodes based on a portion of a larger string,
+ * such as a full path.
+ */
+int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+ const char *name, int namelen);
+/**
+ * fdt_subnode_offset - find a subnode of a given node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_subnode_offset() finds a subnode of the node at structure block
+ * offset parentoffset with the given name. name may include a unit
+ * address, in which case fdt_subnode_offset() will find the subnode
+ * with that unit address, or the unit address may be omitted, in
+ * which case fdt_subnode_offset() will find an arbitrary subnode
+ * whose name excluding unit address matches the given name.
+ *
+ * returns:
+ * structure block offset of the requested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_path_offset - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ *
+ * fdt_path_offset() finds a node of a given path in the device tree.
+ * Each path component may omit the unit address portion, but the
+ * results of this are undefined if any such path component is
+ * ambiguous (that is if there are multiple nodes at the relevant
+ * level matching the given component, differentiated only by unit
+ * address).
+ *
+ * returns:
+ * structure block offset of the node with the requested path (>=0), on success
+ * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
+ * -FDT_ERR_NOTFOUND, if the requested node does not exist
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_path_offset(const void *fdt, const char *path);
+
+/**
+ * fdt_get_name - retrieve the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the starting node
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_name() retrieves the name (including unit address) of the
+ * device tree node at structure block offset nodeoffset. If lenp is
+ * non-NULL, the length of this name is also returned, in the integer
+ * pointed to by lenp.
+ *
+ * returns:
+ * pointer to the node's name, on success
+ * If lenp is non-NULL, *lenp contains the length of that name (>=0)
+ * NULL, on error
+ * if lenp is non-NULL *lenp contains an error code (<0):
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
+
+/**
+ * fdt_get_property - find a given property in a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property() retrieves a pointer to the fdt_property
+ * structure within the device tree blob corresponding to the property
+ * named 'name' of the node at offset nodeoffset. If lenp is
+ * non-NULL, the length of the property value is also returned, in the
+ * integer pointed to by lenp.
+ *
+ * returns:
+ * pointer to the structure representing the property
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_NOTFOUND, node does not have named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
+ const char *name, int *lenp);
+static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
+ const char *name,
+ int *lenp)
+{
+ return (struct fdt_property *)(uintptr_t)
+ fdt_get_property(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_getprop - retrieve the value of a given property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop() retrieves a pointer to the value of the property
+ * named 'name' of the node at offset nodeoffset (this will be a
+ * pointer to within the device blob itself, not a copy of the value).
+ * If lenp is non-NULL, the length of the property value is also
+ * returned, in the integer pointed to by lenp.
+ *
+ * returns:
+ * pointer to the property's value
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_NOTFOUND, node does not have named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+ const char *name, int *lenp);
+static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
+ const char *name, int *lenp)
+{
+ return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_get_phandle - retrieve the phandle of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the node
+ *
+ * fdt_get_phandle() retrieves the phandle of the device tree node at
+ * structure block offset nodeoffset.
+ *
+ * returns:
+ * the phandle of the node at nodeoffset, on success (!= 0, != -1)
+ * 0, if the node has no phandle, or another error occurs
+ */
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_get_path - determine the full path of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose path to find
+ * @buf: character buffer to contain the returned path (will be overwritten)
+ * @buflen: size of the character buffer at buf
+ *
+ * fdt_get_path() computes the full path of the node at offset
+ * nodeoffset, and records that path in the buffer at buf.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * 0, on success
+ * buf contains the absolute path of the node at
+ * nodeoffset, as a NUL-terminated string.
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
+ * characters and will not fit in the given buffer.
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
+
+/**
+ * fdt_supernode_atdepth_offset - find a specific ancestor of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ * @supernodedepth: depth of the ancestor to find
+ * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_supernode_atdepth_offset() finds an ancestor of the given node
+ * at a specific depth from the root (where the root itself has depth
+ * 0, its immediate subnodes depth 1 and so forth). So
+ * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
+ * will always return 0, the offset of the root node. If the node at
+ * nodeoffset has depth D, then:
+ * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
+ * will return nodeoffset itself.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+
+ * structure block offset of the node at node offset's ancestor
+ * of depth supernodedepth (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+ int supernodedepth, int *nodedepth);
+
+/**
+ * fdt_node_depth - find the depth of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_node_depth() finds the depth of a given node. The root node
+ * has depth 0, its immediate subnodes depth 1 and so forth.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * depth of the node at nodeoffset (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_depth(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_parent_offset - find the parent of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_parent_offset() locates the parent node of a given node (that
+ * is, it finds the offset of the node which contains the node at
+ * nodeoffset as a subnode).
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset, *twice*.
+ *
+ * returns:
+ * structure block offset of the parent of the node at nodeoffset
+ * (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_parent_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_node_offset_by_prop_value - find nodes with a given property value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @propname: property name to check
+ * @propval: property value to search for
+ * @proplen: length of the value in propval
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the first
+ * node after startoffset, which has a property named propname whose
+ * value is of length proplen and has value equal to propval; or if
+ * startoffset is -1, the very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
+ * propval, proplen);
+ * while (offset != -FDT_ERR_NOTFOUND) {
+ * // other code here
+ * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
+ * propval, proplen);
+ * }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0, >startoffset),
+ * on success
+ * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ * tree after startoffset
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+ const char *propname,
+ const void *propval, int proplen);
+
+/**
+ * fdt_node_offset_by_phandle - find the node with a given phandle
+ * @fdt: pointer to the device tree blob
+ * @phandle: phandle value
+ *
+ * fdt_node_offset_by_phandle() returns the offset of the node
+ * which has the given phandle value. If there is more than one node
+ * in the tree with the given phandle (an invalid tree), results are
+ * undefined.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0), on success
+ * -FDT_ERR_NOTFOUND, no node with that phandle exists
+ * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
+
+/**
+ * fdt_node_check_compatible: check a node's compatible property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @compatible: string to match against
+ *
+ *
+ * fdt_node_check_compatible() returns 0 if the given node contains a
+ * 'compatible' property with the given string as one of its elements,
+ * it returns non-zero otherwise, or on error.
+ *
+ * returns:
+ * 0, if the node has a 'compatible' property listing the given string
+ * 1, if the node has a 'compatible' property, but it does not list
+ * the given string
+ * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
+ * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+ const char *compatible);
+
+/**
+ * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @compatible: 'compatible' string to match against
+ *
+ * fdt_node_offset_by_compatible() returns the offset of the first
+ * node after startoffset, which has a 'compatible' property which
+ * lists the given compatible string; or if startoffset is -1, the
+ * very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
+ * while (offset != -FDT_ERR_NOTFOUND) {
+ * // other code here
+ * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
+ * }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0, >startoffset),
+ * on success
+ * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ * tree after startoffset
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+ const char *compatible);
+
+/**********************************************************************/
+/* Write-in-place functions */
+/**********************************************************************/
+
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len. This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: cell (32-bit integer) value to replace the property with
+ *
+ * fdt_setprop_inplace_cell() replaces the value of a given property
+ * with the 32-bit integer cell value in val, converting val to
+ * big-endian if necessary. This function cannot change the size of a
+ * property, and so will only work if the property already exists and
+ * has length 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Sequential write functions */
+/**********************************************************************/
+
+int fdt_create(void *buf, int bufsize);
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
+int fdt_finish_reservemap(void *fdt);
+int fdt_begin_node(void *fdt, const char *name);
+int fdt_property(void *fdt, const char *name, const void *val, int len);
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_property(fdt, name, &val, sizeof(val));
+}
+#define fdt_property_string(fdt, name, str) \
+ fdt_property(fdt, name, str, strlen(str)+1)
+int fdt_end_node(void *fdt);
+int fdt_finish(void *fdt);
+
+/**********************************************************************/
+/* Read-write functions */
+/**********************************************************************/
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize);
+int fdt_pack(void *fdt);
+
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new reservation entry
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ * are less than n+1 reserve map entries)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_mem_rsv(void *fdt, int n);
+
+/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string. NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ * to contain the new name
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_cell() sets the value of the named property in the
+ * given node to the given cell value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+ uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_string(fdt, nodeoffset, name, str) \
+ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node. This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+ const char *name, int namelen);
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ * structure block offset of the created nodeequested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ * the given name
+ * -FDT_ERR_NOSPACE, if there is insufficient free space in the
+ * blob to contain the new node
+ * -FDT_ERR_NOSPACE
+ * -FDT_ERR_BADLAYOUT
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Debugging / informational functions */
+/**********************************************************************/
+
+const char *fdt_strerror(int errval);
+
+#endif /* _LIBFDT_H */
--- /dev/null
+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#define _B(n) ((unsigned long long)((uint8_t *)&x)[n])
+static inline uint32_t fdt32_to_cpu(uint32_t x)
+{
+ return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
+}
+#define cpu_to_fdt32(x) fdt32_to_cpu(x)
+
+static inline uint64_t fdt64_to_cpu(uint64_t x)
+{
+ return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
+ | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
+}
+#define cpu_to_fdt64(x) fdt64_to_cpu(x)
+#undef _B
+
+#endif /* _LIBFDT_ENV_H */
--- /dev/null
+#ifndef _LIBFDT_INTERNAL_H
+#define _LIBFDT_INTERNAL_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fdt.h>
+
+#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
+
+#define FDT_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
+int _fdt_check_node_offset(const void *fdt, int offset);
+const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
+int _fdt_node_end_offset(void *fdt, int nodeoffset);
+
+static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
+{
+ return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
+}
+
+static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
+{
+ return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
+}
+
+static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
+{
+ const struct fdt_reserve_entry *rsv_table =
+ (const struct fdt_reserve_entry *)
+ ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
+
+ return rsv_table + n;
+}
+static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
+{
+ return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
+}
+
+#define FDT_SW_MAGIC (~FDT_MAGIC)
+
+#endif /* _LIBFDT_INTERNAL_H */
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+/*
+ * Tree building functions
+ */
+
+struct property *build_property(char *name, struct data val, char *label)
+{
+ struct property *new = xmalloc(sizeof(*new));
+
+ new->name = name;
+ new->val = val;
+
+ new->next = NULL;
+
+ new->label = label;
+
+ return new;
+}
+
+struct property *chain_property(struct property *first, struct property *list)
+{
+ assert(first->next == NULL);
+
+ first->next = list;
+ return first;
+}
+
+struct property *reverse_properties(struct property *first)
+{
+ struct property *p = first;
+ struct property *head = NULL;
+ struct property *next;
+
+ while (p) {
+ next = p->next;
+ p->next = head;
+ head = p;
+ p = next;
+ }
+ return head;
+}
+
+struct node *build_node(struct property *proplist, struct node *children)
+{
+ struct node *new = xmalloc(sizeof(*new));
+ struct node *child;
+
+ memset(new, 0, sizeof(*new));
+
+ new->proplist = reverse_properties(proplist);
+ new->children = children;
+
+ for_each_child(new, child) {
+ child->parent = new;
+ }
+
+ return new;
+}
+
+struct node *name_node(struct node *node, char *name, char * label)
+{
+ assert(node->name == NULL);
+
+ node->name = name;
+
+ node->label = label;
+
+ return node;
+}
+
+struct node *chain_node(struct node *first, struct node *list)
+{
+ assert(first->next_sibling == NULL);
+
+ first->next_sibling = list;
+ return first;
+}
+
+void add_property(struct node *node, struct property *prop)
+{
+ struct property **p;
+
+ prop->next = NULL;
+
+ p = &node->proplist;
+ while (*p)
+ p = &((*p)->next);
+
+ *p = prop;
+}
+
+void add_child(struct node *parent, struct node *child)
+{
+ struct node **p;
+
+ child->next_sibling = NULL;
+ child->parent = parent;
+
+ p = &parent->children;
+ while (*p)
+ p = &((*p)->next_sibling);
+
+ *p = child;
+}
+
+struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
+ char *label)
+{
+ struct reserve_info *new = xmalloc(sizeof(*new));
+
+ new->re.address = address;
+ new->re.size = size;
+
+ new->next = NULL;
+
+ new->label = label;
+
+ return new;
+}
+
+struct reserve_info *chain_reserve_entry(struct reserve_info *first,
+ struct reserve_info *list)
+{
+ assert(first->next == NULL);
+
+ first->next = list;
+ return first;
+}
+
+struct reserve_info *add_reserve_entry(struct reserve_info *list,
+ struct reserve_info *new)
+{
+ struct reserve_info *last;
+
+ new->next = NULL;
+
+ if (! list)
+ return new;
+
+ for (last = list; last->next; last = last->next)
+ ;
+
+ last->next = new;
+
+ return list;
+}
+
+struct boot_info *build_boot_info(struct reserve_info *reservelist,
+ struct node *tree, uint32_t boot_cpuid_phys)
+{
+ struct boot_info *bi;
+
+ bi = xmalloc(sizeof(*bi));
+ bi->reservelist = reservelist;
+ bi->dt = tree;
+ bi->boot_cpuid_phys = boot_cpuid_phys;
+
+ return bi;
+}
+
+/*
+ * Tree accessor functions
+ */
+
+const char *get_unitname(struct node *node)
+{
+ if (node->name[node->basenamelen] == '\0')
+ return "";
+ else
+ return node->name + node->basenamelen + 1;
+}
+
+struct property *get_property(struct node *node, const char *propname)
+{
+ struct property *prop;
+
+ for_each_property(node, prop)
+ if (streq(prop->name, propname))
+ return prop;
+
+ return NULL;
+}
+
+cell_t propval_cell(struct property *prop)
+{
+ assert(prop->val.len == sizeof(cell_t));
+ return fdt32_to_cpu(*((cell_t *)prop->val.val));
+}
+
+struct node *get_subnode(struct node *node, const char *nodename)
+{
+ struct node *child;
+
+ for_each_child(node, child)
+ if (streq(child->name, nodename))
+ return child;
+
+ return NULL;
+}
+
+struct node *get_node_by_path(struct node *tree, const char *path)
+{
+ const char *p;
+ struct node *child;
+
+ if (!path || ! (*path))
+ return tree;
+
+ while (path[0] == '/')
+ path++;
+
+ p = strchr(path, '/');
+
+ for_each_child(tree, child) {
+ if (p && strneq(path, child->name, p-path))
+ return get_node_by_path(child, p+1);
+ else if (!p && streq(path, child->name))
+ return child;
+ }
+
+ return NULL;
+}
+
+struct node *get_node_by_label(struct node *tree, const char *label)
+{
+ struct node *child, *node;
+
+ assert(label && (strlen(label) > 0));
+
+ if (tree->label && streq(tree->label, label))
+ return tree;
+
+ for_each_child(tree, child) {
+ node = get_node_by_label(child, label);
+ if (node)
+ return node;
+ }
+
+ return NULL;
+}
+
+struct node *get_node_by_phandle(struct node *tree, cell_t phandle)
+{
+ struct node *child, *node;
+
+ assert((phandle != 0) && (phandle != -1));
+
+ if (tree->phandle == phandle)
+ return tree;
+
+ for_each_child(tree, child) {
+ node = get_node_by_phandle(child, phandle);
+ if (node)
+ return node;
+ }
+
+ return NULL;
+}
+
+struct node *get_node_by_ref(struct node *tree, const char *ref)
+{
+ if (ref[0] == '/')
+ return get_node_by_path(tree, ref);
+ else
+ return get_node_by_label(tree, ref);
+}
+
+cell_t get_node_phandle(struct node *root, struct node *node)
+{
+ static cell_t phandle = 1; /* FIXME: ick, static local */
+
+ if ((node->phandle != 0) && (node->phandle != -1))
+ return node->phandle;
+
+ assert(! get_property(node, "linux,phandle"));
+
+ while (get_node_by_phandle(root, phandle))
+ phandle++;
+
+ node->phandle = phandle;
+ add_property(node,
+ build_property("linux,phandle",
+ data_append_cell(empty_data, phandle),
+ NULL));
+
+ return node->phandle;
+}
--- /dev/null
+/*
+ * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+/*
+ * Like yylineno, this is the current open file pos.
+ */
+
+struct dtc_file *srcpos_file;
+
+static int dtc_open_one(struct dtc_file *file,
+ const char *search,
+ const char *fname)
+{
+ char *fullname;
+
+ if (search) {
+ fullname = xmalloc(strlen(search) + strlen(fname) + 2);
+
+ strcpy(fullname, search);
+ strcat(fullname, "/");
+ strcat(fullname, fname);
+ } else {
+ fullname = strdup(fname);
+ }
+
+ file->file = fopen(fullname, "r");
+ if (!file->file) {
+ free(fullname);
+ return 0;
+ }
+
+ file->name = fullname;
+ return 1;
+}
+
+
+struct dtc_file *dtc_open_file(const char *fname,
+ const struct search_path *search)
+{
+ static const struct search_path default_search = { NULL, NULL, NULL };
+
+ struct dtc_file *file;
+ const char *slash;
+
+ file = xmalloc(sizeof(struct dtc_file));
+
+ slash = strrchr(fname, '/');
+ if (slash) {
+ char *dir = xmalloc(slash - fname + 1);
+
+ memcpy(dir, fname, slash - fname);
+ dir[slash - fname] = 0;
+ file->dir = dir;
+ } else {
+ file->dir = NULL;
+ }
+
+ if (streq(fname, "-")) {
+ file->name = "stdin";
+ file->file = stdin;
+ return file;
+ }
+
+ if (fname[0] == '/') {
+ file->file = fopen(fname, "r");
+ if (!file->file)
+ goto fail;
+
+ file->name = strdup(fname);
+ return file;
+ }
+
+ if (!search)
+ search = &default_search;
+
+ while (search) {
+ if (dtc_open_one(file, search->dir, fname))
+ return file;
+
+ if (errno != ENOENT)
+ goto fail;
+
+ search = search->next;
+ }
+
+fail:
+ die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
+}
+
+void dtc_close_file(struct dtc_file *file)
+{
+ if (fclose(file->file))
+ die("Error closing \"%s\": %s\n", file->name, strerror(errno));
+
+ free(file->dir);
+ free(file);
+}
--- /dev/null
+/*
+ * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+/*
+ * Augment the standard YYLTYPE with a filenum index into an
+ * array of all opened filenames.
+ */
+
+#include <stdio.h>
+
+struct dtc_file {
+ char *dir;
+ const char *name;
+ FILE *file;
+};
+
+#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
+typedef struct YYLTYPE {
+ int first_line;
+ int first_column;
+ int last_line;
+ int last_column;
+ struct dtc_file *file;
+} YYLTYPE;
+
+#define YYLTYPE_IS_DECLARED 1
+#define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+/* Cater to old parser templates. */
+#ifndef YYID
+#define YYID(n) (n)
+#endif
+
+#define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (YYID (N)) \
+ { \
+ (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
+ (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
+ (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
+ (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
+ (Current).file = YYRHSLOC (Rhs, N).file; \
+ } \
+ else \
+ { \
+ (Current).first_line = (Current).last_line = \
+ YYRHSLOC (Rhs, 0).last_line; \
+ (Current).first_column = (Current).last_column = \
+ YYRHSLOC (Rhs, 0).last_column; \
+ (Current).file = YYRHSLOC (Rhs, 0).file; \
+ } \
+ while (YYID (0))
+
+
+
+extern void yyerror(char const *);
+extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
+
+extern struct dtc_file *srcpos_file;
+
+struct search_path {
+ const char *dir; /* NULL for current directory */
+ struct search_path *prev, *next;
+};
+
+extern struct dtc_file *dtc_open_file(const char *fname,
+ const struct search_path *search);
+extern void dtc_close_file(struct dtc_file *file);
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern FILE *yyin;
+extern int yyparse(void);
+
+struct boot_info *the_boot_info;
+int treesource_error;
+
+struct boot_info *dt_from_source(const char *fname)
+{
+ the_boot_info = NULL;
+ treesource_error = 0;
+
+ srcpos_file = dtc_open_file(fname, NULL);
+ yyin = srcpos_file->file;
+
+ if (yyparse() != 0)
+ die("Unable to parse input tree\n");
+
+ if (treesource_error)
+ die("Syntax error parsing input tree\n");
+
+ return the_boot_info;
+}
+
+static void write_prefix(FILE *f, int level)
+{
+ int i;
+
+ for (i = 0; i < level; i++)
+ fputc('\t', f);
+}
+
+int isstring(char c)
+{
+ return (isprint(c)
+ || (c == '\0')
+ || strchr("\a\b\t\n\v\f\r", c));
+}
+
+static void write_propval_string(FILE *f, struct data val)
+{
+ const char *str = val.val;
+ int i;
+ int newchunk = 1;
+ struct marker *m = val.markers;
+
+ assert(str[val.len-1] == '\0');
+
+ for (i = 0; i < (val.len-1); i++) {
+ char c = str[i];
+
+ if (newchunk) {
+ while (m && (m->offset <= i)) {
+ if (m->type == LABEL) {
+ assert(m->offset == i);
+ fprintf(f, "%s: ", m->ref);
+ }
+ m = m->next;
+ }
+ fprintf(f, "\"");
+ newchunk = 0;
+ }
+
+ switch (c) {
+ case '\a':
+ fprintf(f, "\\a");
+ break;
+ case '\b':
+ fprintf(f, "\\b");
+ break;
+ case '\t':
+ fprintf(f, "\\t");
+ break;
+ case '\n':
+ fprintf(f, "\\n");
+ break;
+ case '\v':
+ fprintf(f, "\\v");
+ break;
+ case '\f':
+ fprintf(f, "\\f");
+ break;
+ case '\r':
+ fprintf(f, "\\r");
+ break;
+ case '\\':
+ fprintf(f, "\\\\");
+ break;
+ case '\"':
+ fprintf(f, "\\\"");
+ break;
+ case '\0':
+ fprintf(f, "\", ");
+ newchunk = 1;
+ break;
+ default:
+ if (isprint(c))
+ fprintf(f, "%c", c);
+ else
+ fprintf(f, "\\x%02hhx", c);
+ }
+ }
+ fprintf(f, "\"");
+
+ /* Wrap up any labels at the end of the value */
+ for_each_marker_of_type(m, LABEL) {
+ assert (m->offset == val.len);
+ fprintf(f, " %s:", m->ref);
+ }
+}
+
+static void write_propval_cells(FILE *f, struct data val)
+{
+ void *propend = val.val + val.len;
+ cell_t *cp = (cell_t *)val.val;
+ struct marker *m = val.markers;
+
+ fprintf(f, "<");
+ for (;;) {
+ while (m && (m->offset <= ((char *)cp - val.val))) {
+ if (m->type == LABEL) {
+ assert(m->offset == ((char *)cp - val.val));
+ fprintf(f, "%s: ", m->ref);
+ }
+ m = m->next;
+ }
+
+ fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
+ if ((void *)cp >= propend)
+ break;
+ fprintf(f, " ");
+ }
+
+ /* Wrap up any labels at the end of the value */
+ for_each_marker_of_type(m, LABEL) {
+ assert (m->offset == val.len);
+ fprintf(f, " %s:", m->ref);
+ }
+ fprintf(f, ">");
+}
+
+static void write_propval_bytes(FILE *f, struct data val)
+{
+ void *propend = val.val + val.len;
+ const char *bp = val.val;
+ struct marker *m = val.markers;
+
+ fprintf(f, "[");
+ for (;;) {
+ while (m && (m->offset == (bp-val.val))) {
+ if (m->type == LABEL)
+ fprintf(f, "%s: ", m->ref);
+ m = m->next;
+ }
+
+ fprintf(f, "%02hhx", *bp++);
+ if ((const void *)bp >= propend)
+ break;
+ fprintf(f, " ");
+ }
+
+ /* Wrap up any labels at the end of the value */
+ for_each_marker_of_type(m, LABEL) {
+ assert (m->offset == val.len);
+ fprintf(f, " %s:", m->ref);
+ }
+ fprintf(f, "]");
+}
+
+static void write_propval(FILE *f, struct property *prop)
+{
+ int len = prop->val.len;
+ const char *p = prop->val.val;
+ struct marker *m = prop->val.markers;
+ int nnotstring = 0, nnul = 0;
+ int nnotstringlbl = 0, nnotcelllbl = 0;
+ int i;
+
+ if (len == 0) {
+ fprintf(f, ";\n");
+ return;
+ }
+
+ for (i = 0; i < len; i++) {
+ if (! isstring(p[i]))
+ nnotstring++;
+ if (p[i] == '\0')
+ nnul++;
+ }
+
+ for_each_marker_of_type(m, LABEL) {
+ if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0'))
+ nnotstringlbl++;
+ if ((m->offset % sizeof(cell_t)) != 0)
+ nnotcelllbl++;
+ }
+
+ fprintf(f, " = ");
+ if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul))
+ && (nnotstringlbl == 0)) {
+ write_propval_string(f, prop->val);
+ } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) {
+ write_propval_cells(f, prop->val);
+ } else {
+ write_propval_bytes(f, prop->val);
+ }
+
+ fprintf(f, ";\n");
+}
+
+static void write_tree_source_node(FILE *f, struct node *tree, int level)
+{
+ struct property *prop;
+ struct node *child;
+
+ write_prefix(f, level);
+ if (tree->label)
+ fprintf(f, "%s: ", tree->label);
+ if (tree->name && (*tree->name))
+ fprintf(f, "%s {\n", tree->name);
+ else
+ fprintf(f, "/ {\n");
+
+ for_each_property(tree, prop) {
+ write_prefix(f, level+1);
+ if (prop->label)
+ fprintf(f, "%s: ", prop->label);
+ fprintf(f, "%s", prop->name);
+ write_propval(f, prop);
+ }
+ for_each_child(tree, child) {
+ fprintf(f, "\n");
+ write_tree_source_node(f, child, level+1);
+ }
+ write_prefix(f, level);
+ fprintf(f, "};\n");
+}
+
+
+void dt_to_source(FILE *f, struct boot_info *bi)
+{
+ struct reserve_info *re;
+
+ fprintf(f, "/dts-v1/;\n\n");
+
+ for (re = bi->reservelist; re; re = re->next) {
+ if (re->label)
+ fprintf(f, "%s: ", re->label);
+ fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n",
+ (unsigned long long)re->re.address,
+ (unsigned long long)re->re.size);
+ }
+
+ write_tree_source_node(f, bi->dt, 0);
+}
+
--- /dev/null
+#define DTC_VERSION "DTC 1.2.0"
my $file = shift;
my $nested;
- if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) {
+ if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) {
+ #my $decl_type = $1;
$declaration_name = $2;
my $members = $3;
$nested = $1;
# ignore members marked private:
- $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
- $members =~ s/\/\*.*?private:.*//gos;
+ $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos;
+ $members =~ s/\/\*\s*private:.*//gos;
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
$state = 0;
}
+sub tracepoint_munge($) {
+ my $file = shift;
+ my $tracepointname = 0;
+ my $tracepointargs = 0;
+
+ if($prototype =~ m/TRACE_EVENT\((.*?),/) {
+ $tracepointname = $1;
+ }
+ if($prototype =~ m/TP_PROTO\((.*?)\)/) {
+ $tracepointargs = $1;
+ }
+ if (($tracepointname eq 0) || ($tracepointargs eq 0)) {
+ print STDERR "Warning(${file}:$.): Unrecognized tracepoint format: \n".
+ "$prototype\n";
+ } else {
+ $prototype = "static inline void trace_$tracepointname($tracepointargs)";
+ }
+}
+
sub syscall_munge() {
my $void = 0;
if ($prototype =~ /SYSCALL_DEFINE/) {
syscall_munge();
}
+ if ($prototype =~ /TRACE_EVENT/) {
+ tracepoint_munge($file);
+ }
dump_function($prototype, $file);
reset_state();
}
return 0;
}
/* Fix endianness in ELF header */
- hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
- hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
- hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
- hdr->e_machine = TO_NATIVE(hdr->e_machine);
- hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_machine = TO_NATIVE(hdr->e_machine);
+ hdr->e_version = TO_NATIVE(hdr->e_version);
+ hdr->e_entry = TO_NATIVE(hdr->e_entry);
+ hdr->e_phoff = TO_NATIVE(hdr->e_phoff);
+ hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
+ hdr->e_flags = TO_NATIVE(hdr->e_flags);
+ hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize);
+ hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize);
+ hdr->e_phnum = TO_NATIVE(hdr->e_phnum);
+ hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize);
+ hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
+ hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
sechdrs = (void *)hdr + hdr->e_shoff;
info->sechdrs = sechdrs;
/* Fix endianness in section headers */
for (i = 0; i < hdr->e_shnum; i++) {
- sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
- sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
- sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
- sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
- sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
- sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
- sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
+ sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
+ sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags);
+ sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
+ sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
+ sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
+ sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
+ sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign);
+ sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize);
}
/* Find symbol table. */
for (i = 1; i < hdr->e_shnum; i++) {
/* sections that we do not want to do full section mismatch check on */
static const char *section_white_list[] =
- { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+{
+ ".comment*",
+ ".debug*",
+ ".mdebug*", /* alpha, score, mips etc. */
+ ".pdr", /* alpha, score, mips etc. */
+ ".stab*",
+ ".note*",
+ ".got*",
+ ".toc*",
+ NULL
+};
/*
- * Is this section one we do not want to check?
- * This is often debug sections.
- * If we are going to check this section then
- * test if section name ends with a dot and a number.
- * This is used to find sections where the linker have
- * appended a dot-number to make the name unique.
+ * This is used to find sections missing the SHF_ALLOC flag.
* The cause of this is often a section specified in assembler
- * without "ax" / "aw" and the same section used in .c
- * code where gcc add these.
+ * without "ax" / "aw".
*/
-static int check_section(const char *modname, const char *sec)
-{
- const char *e = sec + strlen(sec) - 1;
- if (match(sec, section_white_list))
- return 1;
-
- if (*e && isdigit(*e)) {
- /* consume all digits */
- while (*e && e != sec && isdigit(*e))
- e--;
- if (*e == '.' && !strstr(sec, ".linkonce")) {
- warn("%s (%s): unexpected section name.\n"
- "The (.[number]+) following section name are "
- "ld generated and not expected.\n"
- "Did you forget to use \"ax\"/\"aw\" "
- "in a .S file?\n"
- "Note that for example <linux/init.h> contains\n"
- "section definitions for use in .S files.\n\n",
- modname, sec);
- }
+static void check_section(const char *modname, struct elf_info *elf,
+ Elf_Shdr *sechdr)
+{
+ const char *sec = sech_name(elf, sechdr);
+
+ if (sechdr->sh_type == SHT_PROGBITS &&
+ !(sechdr->sh_flags & SHF_ALLOC) &&
+ !match(sec, section_white_list)) {
+ warn("%s (%s): unexpected non-allocatable section.\n"
+ "Did you forget to use \"ax\"/\"aw\" in a .S file?\n"
+ "Note that for example <linux/init.h> contains\n"
+ "section definitions for use in .S files.\n\n",
+ modname, sec);
}
- return 0;
}
/* data section */
static const char *data_sections[] = { DATA_SECTIONS, NULL };
-/* sections that may refer to an init/exit section with no warning */
-static const char *initref_sections[] =
-{
- ".text.init.refok*",
- ".exit.text.refok*",
- ".data.init.refok*",
- NULL
-};
-
/* symbols in .data that may refer to init/exit sections */
static const char *symbol_white_list[] =
/**
* Whitelist to allow certain references to pass with no warning.
*
- * Pattern 0:
- * Do not warn if funtion/data are marked with __init_refok/__initdata_refok.
- * The pattern is identified by:
- * fromsec = .text.init.refok* | .data.init.refok*
- *
* Pattern 1:
* If a module parameter is declared __initdata and permissions=0
* then this is legal despite the warning generated.
* *probe_one, *_console, *_timer
*
* Pattern 3:
- * Whitelist all refereces from .text.head to .init.data
- * Whitelist all refereces from .text.head to .init.text
+ * Whitelist all references from .head.text to any init section
*
* Pattern 4:
* Some symbols belong to init section but still it is ok to reference
static int secref_whitelist(const char *fromsec, const char *fromsym,
const char *tosec, const char *tosym)
{
- /* Check for pattern 0 */
- if (match(fromsec, initref_sections))
- return 0;
-
/* Check for pattern 1 */
if (match(tosec, init_data_sections) &&
match(fromsec, data_sections) &&
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rela");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rela = start; rela < stop; rela++) {
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rel");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rel = start; rel < stop; rel++) {
/* Walk through all sections */
for (i = 0; i < elf->hdr->e_shnum; i++) {
+ check_section(modname, elf, &elf->sechdrs[i]);
/* We want to process only relocation sections and not .init */
if (sechdrs[i].sh_type == SHT_RELA)
section_rela(modname, elf, &elf->sechdrs[i]);
if (!mod->skip)
add_marker(mod, marker, fmt);
}
+ release_file(file, size);
return;
fail:
fatal("parse error in markers list file\n");
# which will also be the location of that section after final link.
# e.g.
#
-# .section ".text.sched"
+# .section ".sched.text", "ax"
# .globl my_func
# my_func:
# [...]
# [...]
#
# Both relocation offsets for the mcounts in the above example will be
-# offset from .text.sched. If we make another file called tmp.s with:
+# offset from .sched.text. If we make another file called tmp.s with:
#
# .section __mcount_loc
# .quad my_func + 0x5
# But this gets hard if my_func is not globl (a static function).
# In such a case we have:
#
-# .section ".text.sched"
+# .section ".sched.text", "ax"
# my_func:
# [...]
# call mcount (offset: 0x5)
# Check for git and a git repo.
if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
- # Do we have an untagged version?
- if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
- if tag=`git describe 2>/dev/null`; then
- echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
- else
- printf '%s%s' -g $head
- fi
+ # Do we have an untagged tag?
+ if atag=`git describe 2>/dev/null`; then
+ echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+ # add -g${head}, if there is no usable tag
+ else
+ printf '%s%s' -g $head
fi
# Is this git on svn?
;;
"tags")
+ rm -f tags
xtags ctags
;;
"TAGS")
+ rm -f TAGS
xtags etags
;;
esac
struct fown_struct *fown, int signum)
{
struct file *file;
- u32 sid = current_sid();
+ u32 sid = task_sid(tsk);
u32 perm;
struct file_security_struct *fsec;
struct onyx {
/* cache registers 65 to 80, they are write-only! */
u8 cache[16];
- struct i2c_client i2c;
+ struct i2c_client *i2c;
struct aoa_codec codec;
u32 initialised:1,
spdif_locked:1,
*value = onyx->cache[reg-FIRSTREGISTER];
return 0;
}
- v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+ v = i2c_smbus_read_byte_data(onyx->i2c, reg);
if (v < 0)
return -1;
*value = (u8)v;
{
int result;
- result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+ result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
if (!result)
onyx->cache[reg-FIRSTREGISTER] = value;
return result;
onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
}
-static struct i2c_driver onyx_driver;
-
static int onyx_create(struct i2c_adapter *adapter,
struct device_node *node,
int addr)
{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
+ info.addr = addr;
+ info.platform_data = node;
+ client = i2c_new_device(adapter, &info);
+ if (!client)
+ return -ENODEV;
+
+ /*
+ * We know the driver is already loaded, so the device should be
+ * already bound. If not it means binding failed, which suggests
+ * the device doesn't really exist and should be deleted.
+ * Ideally this would be replaced by better checks _before_
+ * instantiating the device.
+ */
+ if (!client->driver) {
+ i2c_unregister_device(client);
+ return -ENODEV;
+ }
+
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return 0;
+}
+
+static int onyx_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = client->dev.platform_data;
struct onyx *onyx;
u8 dummy;
return -ENOMEM;
mutex_init(&onyx->mutex);
- onyx->i2c.driver = &onyx_driver;
- onyx->i2c.adapter = adapter;
- onyx->i2c.addr = addr & 0x7f;
- strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
-
- if (i2c_attach_client(&onyx->i2c)) {
- printk(KERN_ERR PFX "failed to attach to i2c\n");
- goto fail;
- }
+ onyx->i2c = client;
+ i2c_set_clientdata(client, onyx);
/* we try to read from register ONYX_REG_CONTROL
* to check if the codec is present */
if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
- i2c_detach_client(&onyx->i2c);
printk(KERN_ERR PFX "failed to read control register\n");
goto fail;
}
onyx->codec.node = of_node_get(node);
if (aoa_codec_register(&onyx->codec)) {
- i2c_detach_client(&onyx->i2c);
goto fail;
}
printk(KERN_DEBUG PFX "created and attached onyx instance\n");
return 0;
fail:
+ i2c_set_clientdata(client, NULL);
kfree(onyx);
- return -EINVAL;
+ return -ENODEV;
}
static int onyx_i2c_attach(struct i2c_adapter *adapter)
return onyx_create(adapter, NULL, 0x47);
}
-static int onyx_i2c_detach(struct i2c_client *client)
+static int onyx_i2c_remove(struct i2c_client *client)
{
- struct onyx *onyx = container_of(client, struct onyx, i2c);
- int err;
+ struct onyx *onyx = i2c_get_clientdata(client);
- if ((err = i2c_detach_client(client)))
- return err;
aoa_codec_unregister(&onyx->codec);
of_node_put(onyx->codec.node);
if (onyx->codec_info)
kfree(onyx->codec_info);
+ i2c_set_clientdata(client, onyx);
kfree(onyx);
return 0;
}
+static const struct i2c_device_id onyx_i2c_id[] = {
+ { "aoa_codec_onyx", 0 },
+ { }
+};
+
static struct i2c_driver onyx_driver = {
.driver = {
.name = "aoa_codec_onyx",
.owner = THIS_MODULE,
},
.attach_adapter = onyx_i2c_attach,
- .detach_client = onyx_i2c_detach,
+ .probe = onyx_i2c_probe,
+ .remove = onyx_i2c_remove,
+ .id_table = onyx_i2c_id,
};
static int __init onyx_init(void)
struct tas {
struct aoa_codec codec;
- struct i2c_client i2c;
+ struct i2c_client *i2c;
u32 mute_l:1, mute_r:1 ,
controls_created:1 ,
drc_enabled:1,
static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
{
if (len == 1)
- return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
+ return i2c_smbus_write_byte_data(tas->i2c, reg, *data);
else
- return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
+ return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data);
}
static void tas3004_set_drc(struct tas *tas)
}
-static struct i2c_driver tas_driver;
-
static int tas_create(struct i2c_adapter *adapter,
struct device_node *node,
int addr)
{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
+ info.addr = addr;
+ info.platform_data = node;
+
+ client = i2c_new_device(adapter, &info);
+ if (!client)
+ return -ENODEV;
+
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return 0;
+}
+
+static int tas_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = client->dev.platform_data;
struct tas *tas;
tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
return -ENOMEM;
mutex_init(&tas->mtx);
- tas->i2c.driver = &tas_driver;
- tas->i2c.adapter = adapter;
- tas->i2c.addr = addr;
+ tas->i2c = client;
+ i2c_set_clientdata(client, tas);
+
/* seems that half is a saner default */
tas->drc_range = TAS3004_DRC_MAX / 2;
- strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
-
- if (i2c_attach_client(&tas->i2c)) {
- printk(KERN_ERR PFX "failed to attach to i2c\n");
- goto fail;
- }
strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
tas->codec.owner = THIS_MODULE;
tas->codec.node = of_node_get(node);
if (aoa_codec_register(&tas->codec)) {
- goto detach;
+ goto fail;
}
printk(KERN_DEBUG
"snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
- addr, node->full_name);
+ (unsigned int)client->addr, node->full_name);
return 0;
- detach:
- i2c_detach_client(&tas->i2c);
fail:
mutex_destroy(&tas->mtx);
kfree(tas);
return -ENODEV;
}
-static int tas_i2c_detach(struct i2c_client *client)
+static int tas_i2c_remove(struct i2c_client *client)
{
- struct tas *tas = container_of(client, struct tas, i2c);
- int err;
+ struct tas *tas = i2c_get_clientdata(client);
u8 tmp = TAS_ACR_ANALOG_PDOWN;
- if ((err = i2c_detach_client(client)))
- return err;
aoa_codec_unregister(&tas->codec);
of_node_put(tas->codec.node);
return 0;
}
+static const struct i2c_device_id tas_i2c_id[] = {
+ { "aoa_codec_tas", 0 },
+ { }
+};
+
static struct i2c_driver tas_driver = {
.driver = {
.name = "aoa_codec_tas",
.owner = THIS_MODULE,
},
.attach_adapter = tas_i2c_attach,
- .detach_client = tas_i2c_detach,
+ .probe = tas_i2c_probe,
+ .remove = tas_i2c_remove,
+ .id_table = tas_i2c_id,
};
static int __init tas_init(void)
int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
{
int ret;
- struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;
+ pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
if (pdata) {
switch (pdata->reset_gpio) {
new_hw_ptr = hw_base + pos;
}
}
+ /* Skip the jiffies check for hardwares with BATCH flag.
+ * Such hardware usually just increases the position at each IRQ,
+ * thus it can't give any strange position.
+ */
+ if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
+ goto no_jiffies_check;
hdelta = new_hw_ptr - old_hw_ptr;
jdelta = jiffies - runtime->hw_ptr_jiffies;
if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_base -= hw_base % runtime->buffer_size;
delta = 0;
}
+ no_jiffies_check:
if (delta > runtime->period_size + runtime->period_size / 2) {
hw_ptr_error(substream,
"Lost interrupts? "
static struct snd_pcm_hardware snd_msnd_playback = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
static struct snd_pcm_hardware snd_msnd_capture = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
}
/* nothing should be in powerdown mode */
snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0);
- end_time = jiffies + msecs_to_jiffies(100);
+ end_time = jiffies + msecs_to_jiffies(120);
do {
if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f)
goto __ready_ok;
.name = "HP nx6125",
.type = AC97_TUNE_MUTE_LED
},
+ {
+ .subvendor = 0x103c,
+ .subdevice = 0x3091,
+ .name = "unknown HP",
+ .type = AC97_TUNE_MUTE_LED
+ },
{ } /* terminator */
};
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = 0, /* set at runtime */
.channels_min = 2,
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX,
.dev_free = snd_cmipci_dev_free,
};
unsigned int val;
- long iomidi;
+ long iomidi = 0;
int integrated_midi = 0;
char modelstr[16];
int pcm_index, pcm_spdif_index;
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
{ } /* end */
};
+static struct hda_verb ad1884a_mobile_verbs[] = {
+ /* DACs; unmute as default */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ /* Port-A (HP) mixer - route only from analog mixer */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-A pin */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-A (HP) pin - always unmuted */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Port-B (mic jack) pin */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-C (int mic) pin */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-F (int speaker) mixer - route only from analog mixer */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-F pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Analog mixer; mute as default */
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+ /* Analog Mix output amp */
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* capture sources */
+ /* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* unsolicited event for pin-sense */
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ { } /* end */
+};
+
/*
* Thinkpad X300
* 0x11 - HP
break;
case AD1884A_MOBILE:
spec->mixers[0] = ad1884a_mobile_mixers;
- spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
+ spec->init_verbs[0] = ad1884a_mobile_verbs;
spec->multiout.dig_out_nid = 0;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
ALC663_ASUS_MODE4,
ALC663_ASUS_MODE5,
ALC663_ASUS_MODE6,
+ ALC272_DELL,
+ ALC272_DELL_ZM1,
ALC662_AUTO,
ALC662_MODEL_LAST,
};
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703),
SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
ALC269_ASUS_EEEPC_P901),
+ SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
{}
0x02, 0x03, 0x04
};
+static hda_nid_t alc272_dac_nids[2] = {
+ 0x02, 0x03
+};
+
static hda_nid_t alc662_adc_nids[1] = {
/* ADC1-2 */
0x09,
};
+static hda_nid_t alc272_adc_nids[1] = {
+ /* ADC1-2 */
+ 0x08,
+};
+
static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
+
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* always trun on EAPD */
{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
{}
};
+static struct hda_verb alc272_dell_zm1_init_verbs[] = {
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
+static struct hda_verb alc272_dell_init_verbs[] = {
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
static struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
{ } /* end */
};
+static struct snd_kcontrol_new alc272_auto_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
{
unsigned int present;
static struct snd_pci_quirk alc662_cfg_tbl[] = {
SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
+ SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL),
+ SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA),
+ SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
/*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
/*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
ALC662_3ST_6ch_DIG),
.unsol_event = alc663_mode6_unsol_event,
.init_hook = alc663_mode6_inithook,
},
+ [ALC272_DELL] = {
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc272_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs, alc272_dell_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc272_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .adc_nids = alc272_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
+ .capsrc_nids = alc272_capsrc_nids,
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc663_m51va_capture_source,
+ .unsol_event = alc663_m51va_unsol_event,
+ .init_hook = alc663_m51va_inithook,
+ },
+ [ALC272_DELL_ZM1] = {
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc272_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .adc_nids = alc662_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .capsrc_nids = alc662_capsrc_nids,
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc663_m51va_capture_source,
+ .unsol_event = alc663_m51va_unsol_event,
+ .init_hook = alc663_m51va_inithook,
+ },
};
if (pos == 0) {
snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
__retry:
- if (attempt < 2) {
+ if (attempt < 3) {
+ msleep(300);
attempt++;
goto __again;
}
- return;
+ goto __end;
}
pos /= 4;
else if (pos < 47500 || pos > 48500)
/* not 48000Hz, tuning the clock.. */
chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
+ __end:
printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
}
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
static struct snd_pcm_hardware pdacf_pcm_capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
static struct pmac_keywest *keywest_ctx;
-static int keywest_attach_adapter(struct i2c_adapter *adapter);
-static int keywest_detach_client(struct i2c_client *client);
-
-struct i2c_driver keywest_driver = {
- .driver = {
- .name = "PMac Keywest Audio",
- },
- .attach_adapter = &keywest_attach_adapter,
- .detach_client = &keywest_detach_client,
-};
-
-
#ifndef i2c_device_name
#define i2c_device_name(x) ((x)->name)
#endif
+static int keywest_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ i2c_set_clientdata(client, keywest_ctx);
+ return 0;
+}
+
+/*
+ * This is kind of a hack, best would be to turn powermac to fixed i2c
+ * bus numbers and declare the sound device as part of platform
+ * initialization
+ */
static int keywest_attach_adapter(struct i2c_adapter *adapter)
{
- int err;
- struct i2c_client *new_client;
+ struct i2c_board_info info;
if (! keywest_ctx)
return -EINVAL;
if (strncmp(i2c_device_name(adapter), "mac-io", 6))
return 0; /* ignored */
- new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (! new_client)
- return -ENOMEM;
-
- new_client->addr = keywest_ctx->addr;
- i2c_set_clientdata(new_client, keywest_ctx);
- new_client->adapter = adapter;
- new_client->driver = &keywest_driver;
- new_client->flags = 0;
-
- strcpy(i2c_device_name(new_client), keywest_ctx->name);
- keywest_ctx->client = new_client;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "keywest", I2C_NAME_SIZE);
+ info.addr = keywest_ctx->addr;
+ keywest_ctx->client = i2c_new_device(adapter, &info);
- /* Tell the i2c layer a new client has arrived */
- if (i2c_attach_client(new_client)) {
- snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n");
- err = -ENODEV;
- goto __err;
- }
-
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&keywest_ctx->client->detected,
+ &keywest_ctx->client->driver->clients);
return 0;
-
- __err:
- kfree(new_client);
- keywest_ctx->client = NULL;
- return err;
}
-static int keywest_detach_client(struct i2c_client *client)
+static int keywest_remove(struct i2c_client *client)
{
+ i2c_set_clientdata(client, NULL);
if (! keywest_ctx)
return 0;
if (client == keywest_ctx->client)
keywest_ctx->client = NULL;
- i2c_detach_client(client);
- kfree(client);
return 0;
}
+
+static const struct i2c_device_id keywest_i2c_id[] = {
+ { "keywest", 0 },
+ { }
+};
+
+struct i2c_driver keywest_driver = {
+ .driver = {
+ .name = "PMac Keywest Audio",
+ },
+ .attach_adapter = keywest_attach_adapter,
+ .probe = keywest_probe,
+ .remove = keywest_remove,
+ .id_table = keywest_i2c_id,
+};
+
/* exported */
void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
{
/* PCM hardware DMA capabilities - platform specific */
static const struct snd_pcm_hardware au1xpsc_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
.formats = AU1XPSC_PCM_FMTS,
.period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES,
.period_bytes_max = 4096 * 1024 - 1,
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
-obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
*/
static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
+/*
+ * Gain control for earpiece amplifier
+ * 0 dB to 12 dB in 6 dB steps (mute instead of -6)
+ */
+static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1);
+
/*
* Capture gain after the ADCs
* from 0 dB to 31 dB in 1 dB steps
4, 3, 0, output_tvl),
SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
- TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
+ TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl),
/* Common capture gain controls */
SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
* required for LRC in master mode. The DACs or ADCs need a
* valid audio path i.e. pin -> ADC or DAC -> pin before
* the LRC will be enabled in master mode. */
- if (!master && cmd != SNDRV_PCM_TRIGGER_START)
+ if (!master || cmd != SNDRV_PCM_TRIGGER_START)
return 0;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int reg = kcontrol->private_value & 0xff;
- int reg2 = (kcontrol->private_value >> 24) & 0xff;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
int ret;
u16 val;
return 0;
}
-#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
+#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
+ xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_2r, \
.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
- .private_value = (reg_left) | ((shift) << 8) | \
- ((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .max = xmax, .invert = xinvert} }
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
reg = wm8580_read(codec, WM8580_PLLA4 + offset);
reg &= ~0x3f;
reg |= pll_div.prescale | pll_div.postscale << 1 |
- pll_div.freqmode << 4;
+ pll_div.freqmode << 3;
wm8580_write(codec, WM8580_PLLA4 + offset, reg);
}
#ifdef CONFIG_PM
-static int wm9705_soc_suspend(struct platform_device *pdev)
+static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
.rate_min = 8000,
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
module_init(n810_soc_init);
module_exit(n810_soc_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("ALSA SoC Nokia N810");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
}
module_exit(snd_omap_mcbsp_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
}
module_exit(omap_soc_platform_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
static struct platform_device *palm27x_snd_device;
-static int __init palm27x_asoc_init(void)
+static int palm27x_asoc_probe(struct platform_device *pdev)
{
int ret;
machine_is_palmld()))
return -ENODEV;
+ if (pdev->dev.platform_data)
+ palm27x_ep_gpio = ((struct palm27x_asoc_info *)
+ (pdev->dev.platform_data))->jack_gpio;
+
ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
if (ret)
return ret;
return ret;
}
-static void __exit palm27x_asoc_exit(void)
+static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
{
free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
gpio_free(palm27x_ep_gpio);
platform_device_unregister(palm27x_snd_device);
+ return 0;
}
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data)
+static struct platform_driver palm27x_wm9712_driver = {
+ .probe = palm27x_asoc_probe,
+ .remove = __devexit_p(palm27x_asoc_remove),
+ .driver = {
+ .name = "palm27x-asoc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init palm27x_asoc_init(void)
+{
+ return platform_driver_register(&palm27x_wm9712_driver);
+}
+
+static void __exit palm27x_asoc_exit(void)
{
- palm27x_ep_gpio = data->jack_gpio;
+ platform_driver_unregister(&palm27x_wm9712_driver);
}
module_init(palm27x_asoc_init);
* ssp_set_clkdiv - set SSP clock divider
* @div: serial clock rate divider
*/
-static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+static void ssp_set_scr(struct ssp_device *ssp, u32 div)
{
- struct ssp_device *ssp = dev->ssp;
- u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ sscr0 &= ~0x0000ff00;
+ sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+ } else {
+ sscr0 &= ~0x000fff00;
+ sscr0 |= (div - 1) << 8; /* 1..4096 */
+ }
+ ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/**
+ * ssp_get_clkdiv - get SSP clock divider
+ */
+static u32 ssp_get_scr(struct ssp_device *ssp)
+{
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+ u32 div;
- ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ div = ((sscr0 >> 8) & 0xff) * 2 + 2;
+ else
+ div = ((sscr0 >> 8) & 0xfff) + 1;
+ return div;
}
/*
break;
case PXA_SSP_CLK_AUDIO:
priv->sysclk = 0;
- ssp_set_scr(&priv->dev, 1);
+ ssp_set_scr(ssp, 1);
sscr0 |= SSCR0_ACS;
break;
default:
ssp_write_reg(ssp, SSACD, val);
break;
case PXA_SSP_DIV_SCR:
- ssp_set_scr(&priv->dev, div);
+ ssp_set_scr(ssp, div);
break;
default:
return -ENODEV;
case SND_SOC_DAIFMT_I2S:
sspsp = ssp_read_reg(ssp, SSPSP);
- if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
- (width == 16)) {
+ if ((ssp_get_scr(ssp) == 4) && (width == 16)) {
/* This is a special case where the bitclk is 64fs
* and we're not dealing with 2*32 bits of audio
* samples.
return snd_soc_register_dai(dai);
}
-
EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+
+MODULE_LICENSE("GPL");
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = DMABRG_FMTS,
.rates = DMABRG_RATES,
.rate_min = 8000,
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_MU_LAW |
SNDRV_PCM_FMTBIT_A_LAW |
SNDRV_PCM_FMTBIT_U8 |
debug("%s(%p)\n", __func__, substream);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
- else
+ } else {
+ dev->period_in_count[index] = BYTES_PER_SAMPLE;
dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
-
+ }
+
if (dev->streaming)
return 0;
if (!sub)
continue;
- pb = frames_to_bytes(sub->runtime,
- sub->runtime->period_size);
+ pb = snd_pcm_lib_period_bytes(sub);
cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
&dev->period_out_count[stream] :
&dev->period_in_count[stream];
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
return true;
}
+static void snd_us122l_free(struct snd_card *card)
+{
+ struct us122l *us122l = US122L(card);
+ int index = us122l->chip.index;
+ if (index >= 0 && index < SNDRV_CARDS)
+ snd_us122l_card_used[index] = 0;
+}
+
static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
{
int dev;
if (err < 0)
return err;
snd_us122l_card_used[US122L(card)->chip.index = dev] = 1;
-
+ card->private_free = snd_us122l_free;
US122L(card)->chip.dev = device;
US122L(card)->chip.card = card;
mutex_init(&US122L(card)->mutex);
}
usb_put_intf(intf);
- usb_put_dev(US122L(card)->chip.dev);
+ usb_put_dev(us122l->chip.dev);
while (atomic_read(&us122l->mmap_count))
msleep(500);
static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb)
{
struct usb_stream *s = sk->s;
- unsigned l = 0;
- int pack;
-
- urb->iso_frame_desc[0].offset = 0;
- urb->iso_frame_desc[0].length = usb_stream_next_packet_size(sk);
- sk->out_phase = sk->out_phase_peeked;
- urb->transfer_buffer_length = urb->iso_frame_desc[0].length;
-
- for (pack = 1; pack < sk->n_o_ps; pack++) {
- l = usb_stream_next_packet_size(sk);
- if (s->idle_outsize + urb->transfer_buffer_length + l >
- s->period_size)
+ int pack, lb = 0;
+
+ for (pack = 0; pack < sk->n_o_ps; pack++) {
+ int l = usb_stream_next_packet_size(sk);
+ if (s->idle_outsize + lb + l > s->period_size)
goto check;
sk->out_phase = sk->out_phase_peeked;
- urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length;
+ urb->iso_frame_desc[pack].offset = lb;
urb->iso_frame_desc[pack].length = l;
- urb->transfer_buffer_length += l;
+ lb += l;
}
- snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length);
+ snd_printdd(KERN_DEBUG "%i\n", lb);
check:
urb->number_of_packets = pack;
- s->idle_outsize += urb->transfer_buffer_length - s->period_size;
+ urb->transfer_buffer_length = lb;
+ s->idle_outsize += lb - s->period_size;
snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize,
- urb->transfer_buffer_length, s->period_size);
+ lb, s->period_size);
}
static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
struct usb_stream *s = sk->s;
struct urb *io;
struct usb_iso_packet_descriptor *id, *od;
- int p, l = 0;
+ int p = 0, lb = 0, l = 0;
io = sk->idle_outurb;
od = io->iso_frame_desc;
- io->transfer_buffer_length = 0;
- for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) {
+ for (; s->sync_packet < 0; ++p, ++s->sync_packet) {
struct urb *ii = sk->completed_inurb;
id = ii->iso_frame_desc +
ii->number_of_packets + s->sync_packet;
l = id->actual_length;
od[p].length = l;
- od[p].offset = io->transfer_buffer_length;
- io->transfer_buffer_length += l;
+ od[p].offset = lb;
+ lb += l;
}
for (;
++p, ++s->sync_packet) {
l = inurb->iso_frame_desc[s->sync_packet].actual_length;
- if (s->idle_outsize + io->transfer_buffer_length + l >
- s->period_size)
+ if (s->idle_outsize + lb + l > s->period_size)
goto check_ok;
od[p].length = l;
- od[p].offset = io->transfer_buffer_length;
- io->transfer_buffer_length += l;
+ od[p].offset = lb;
+ lb += l;
}
check_ok:
s->sync_packet -= inurb->number_of_packets;
- if (s->sync_packet < -2 || s->sync_packet > 0) {
+ if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) {
snd_printk(KERN_WARNING "invalid sync_packet = %i;"
" p=%i nop=%i %i %x %x %x > %x\n",
s->sync_packet, p, inurb->number_of_packets,
- s->idle_outsize + io->transfer_buffer_length + l,
- s->idle_outsize, io->transfer_buffer_length, l,
+ s->idle_outsize + lb + l,
+ s->idle_outsize, lb, l,
s->period_size);
return -1;
}
- if (io->transfer_buffer_length % s->cfg.frame_size) {
+ if (unlikely(lb % s->cfg.frame_size)) {
snd_printk(KERN_WARNING"invalid outsize = %i\n",
- io->transfer_buffer_length);
+ lb);
return -1;
}
- s->idle_outsize += io->transfer_buffer_length - s->period_size;
+ s->idle_outsize += lb - s->period_size;
io->number_of_packets = p;
- if (s->idle_outsize > 0) {
- snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
- return -1;
- }
- return 0;
+ io->transfer_buffer_length = lb;
+ if (s->idle_outsize <= 0)
+ return 0;
+
+ snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
+ return -1;
}
static void prepare_inurb(int number_of_packets, struct urb *iu)
{
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
.rate_min = 44100,
int r;
gfn_t base_gfn;
unsigned long npages;
+ int largepages;
unsigned long i;
struct kvm_memory_slot *memslot;
struct kvm_memory_slot old, new;
for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
struct kvm_memory_slot *s = &kvm->memslots[i];
- if (s == memslot)
+ if (s == memslot || !s->npages)
continue;
if (!((base_gfn + npages <= s->base_gfn) ||
(base_gfn >= s->base_gfn + s->npages)))
new.userspace_addr = 0;
}
if (npages && !new.lpage_info) {
- int largepages = npages / KVM_PAGES_PER_HPAGE;
- if (npages % KVM_PAGES_PER_HPAGE)
- largepages++;
- if (base_gfn % KVM_PAGES_PER_HPAGE)
- largepages++;
+ largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE;
+ largepages -= base_gfn / KVM_PAGES_PER_HPAGE;
new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info));
switch (arg) {
case KVM_CAP_USER_MEMORY:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+ case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS:
return 1;
#ifdef CONFIG_HAVE_KVM_IRQCHIP
case KVM_CAP_IRQ_ROUTING:
projects / linux-2.6-block.git / commitdiff
