USB: serial: f81232: set F81534A serial port with RS232 mode

The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device
and the serial ports are default disabled. Each port contains max 3 pins
GPIO and the 3 pins are default pull high with input mode.

When the serial port had activated (running probe()), we'll transform the
3 pins from GPIO function publicly to control Tranceiver privately use.
We'll default set to 0/0/1 for control transceiver to RS232 mode.

Otherwise, If the serial port is not active, the 3 pins is in GPIO mode
and controlled by global GPIO device with VID/PID: 2c42/16f8.

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 7200771897edd0221d7aab51002b788fb31d3ccc..d27876e64e9d4ec6a4e67c0d47096a62a64bde35 100644 (file)
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -92,6 +92,15 @@ MODULE_DEVICE_TABLE(usb, combined_id_table);
 #define F81534A_TRIGGER_MULTIPLE_4X    BIT(3)
 #define F81534A_FIFO_128BYTE           (BIT(1) | BIT(0))
 
+/* Serial port self GPIO control, 2bytes [control&output data][input data] */
+#define F81534A_GPIO_REG               0x10e
+#define F81534A_GPIO_MODE2_DIR         BIT(6) /* 1: input, 0: output */
+#define F81534A_GPIO_MODE1_DIR         BIT(5)
+#define F81534A_GPIO_MODE0_DIR         BIT(4)
+#define F81534A_GPIO_MODE2_OUTPUT      BIT(2)
+#define F81534A_GPIO_MODE1_OUTPUT      BIT(1)
+#define F81534A_GPIO_MODE0_OUTPUT      BIT(0)
+
 struct f81232_private {
        struct mutex lock;
        u8 modem_control;
@@ -859,6 +868,19 @@ static int f81232_port_probe(struct usb_serial_port *port)
        return 0;
 }
 
+static int f81534a_port_probe(struct usb_serial_port *port)
+{
+       int status;
+
+       /* tri-state with pull-high, default RS232 Mode */
+       status = f81232_set_register(port, F81534A_GPIO_REG,
+                                       F81534A_GPIO_MODE2_DIR);
+       if (status)
+               return status;
+
+       return f81232_port_probe(port);
+}
+
 static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
 {
        struct usb_serial_port *port = serial->port[0];
@@ -942,7 +964,7 @@ static struct usb_serial_driver f81534a_device = {
        .tx_empty =             f81232_tx_empty,
        .process_read_urb =     f81534a_process_read_urb,
        .read_int_callback =    f81232_read_int_callback,
-       .port_probe =           f81232_port_probe,
+       .port_probe =           f81534a_port_probe,
        .suspend =              f81232_suspend,
        .resume =               f81232_resume,
 };