S: Supported
F: drivers/net/wireless/ath/ath9k/
+WILOCITY WIL6210 WIRELESS DRIVER
+M: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
+L: linux-wireless@vger.kernel.org
+L: wil6210@qca.qualcomm.com
+S: Supported
+W: http://wireless.kernel.org/en/users/Drivers/wil6210
+F: drivers/net/wireless/ath/wil6210/
+
CARL9170 LINUX COMMUNITY WIRELESS DRIVER
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
-M: Timur Tabi <timur@freescale.com>
+M: Timur Tabi <timur@tabi.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
-S: Supported
+S: Odd Fixes
F: sound/soc/codecs/cs4270*
CLEANCACHE API
F: include/uapi/linux/fb.h
FREESCALE DIU FRAMEBUFFER DRIVER
-M: Timur Tabi <timur@freescale.com>
+M: Timur Tabi <timur@tabi.org>
L: linux-fbdev@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/video/fsl-diu-fb.*
FREESCALE DMA DRIVER
F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
-M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@lists.ozlabs.org
-S: Supported
+S: Orphan
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
F: drivers/net/ethernet/freescale/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
-M: Timur Tabi <timur@freescale.com>
+M: Timur Tabi <timur@tabi.org>
L: linuxppc-dev@lists.ozlabs.org
-S: Supported
+S: Maintained
F: drivers/tty/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
-M: Timur Tabi <timur@freescale.com>
+M: Timur Tabi <timur@tabi.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@lists.ozlabs.org
-S: Supported
+S: Maintained
F: sound/soc/fsl/fsl*
F: sound/soc/fsl/mpc8610_hpcd.c
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Terrified Chipmunk
# *DOCUMENTATION*
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
targets += dtbs
+targets += $(dtb-y)
endif
# *.dtb used to be generated in the directory above. Clean out the
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <1 16 0x1 0x0 /* PB16 periph A */
+ 1 17 0x1 0x0 /* PB17 periph A */
+ 1 18 0x1 0x0>; /* PB18 periph A */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <1 19 0x1 0x0 /* PB19 periph A */
+ 1 20 0x1 0x0 /* PB20 periph A */
+ 1 21 0x1 0x0>; /* PB21 periph A */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <1 0 0x2 0x0 /* PB0 periph B */
+ 1 1 0x2 0x0 /* PB1 periph B */
+ 1 2 0x2 0x0>; /* PB2 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <1 3 0x2 0x0 /* PB3 periph B */
+ 1 4 0x2 0x0 /* PB4 periph B */
+ 1 5 0x2 0x0>; /* PB5 periph B */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <1 6 0x1 0x0 /* PB6 periph A */
+ 1 7 0x1 0x0 /* PB7 periph A */
+ 1 8 0x1 0x0>; /* PB8 periph A */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <1 9 0x1 0x0 /* PB9 periph A */
+ 1 10 0x1 0x0 /* PB10 periph A */
+ 1 11 0x1 0x0>; /* PB11 periph A */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <3 0 0x1 0x0 /* PD0 periph A */
+ 3 1 0x1 0x0 /* PD1 periph A */
+ 3 2 0x1 0x0>; /* PD2 periph A */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <3 3 0x1 0x0 /* PD3 periph A */
+ 3 4 0x1 0x0 /* PD4 periph A */
+ 3 5 0x1 0x0>; /* PD5 periph A */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <3 10 0x1 0x0 /* PD10 periph A */
+ 3 11 0x1 0x0 /* PD11 periph A */
+ 3 12 0x1 0x0>; /* PD12 periph A */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <3 13 0x1 0x0 /* PD13 periph A */
+ 3 14 0x1 0x0 /* PD14 periph A */
+ 3 15 0x1 0x0>; /* PD15 periph A */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
+ ssc0 = &ssc0;
};
cpus {
cpu@0 {
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0>; /* PA26 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
status = "disabled";
};
+ ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
interrupts = <1 4 7>;
};
- ssc0: ssc@f0010000 {
- compatible = "atmel,at91sam9g45-ssc";
- reg = <0xf0010000 0x4000>;
- interrupts = <28 4 5>;
- status = "disabled";
- };
-
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
};
};
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0>; /* PA26 periph B */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
};
};
+ ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
mmc0: mmc@f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
GPIO76_LCD_PCLK, \
GPIO77_LCD_BIAS
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
extern int keypad_set_wake(unsigned int on);
#endif /* __ASM_ARCH_MFP_PXA27X_H */
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
- GPIO113_GPIO,
+ GPIO113_AC97_nRESET_GPIO_HIGH,
GPIO113_AC97_nRESET,
- GPIO95_GPIO,
+ GPIO95_AC97_nRESET_GPIO_HIGH,
GPIO95_AC97_nRESET,
};
targets += dtbs
+targets += $(dtb-y)
dtbs: $(addprefix $(obj)/, $(dtb-y))
/*
* Software defined PTE bits definition.
*/
-#define PTE_VALID (_AT(pteval_t, 1) << 0) /* pte_present() check */
+#define PTE_VALID (_AT(pteval_t, 1) << 0)
+#define PTE_PROT_NONE (_AT(pteval_t, 1) << 1) /* only when !PTE_VALID */
#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */
#define PTE_DIRTY (_AT(pteval_t, 1) << 55)
#define PTE_SPECIAL (_AT(pteval_t, 1) << 56)
extern pgprot_t pgprot_default;
-#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
+#define __pgprot_modify(prot,mask,bits) \
+ __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
+#define _MOD_PROT(p, b) __pgprot_modify(p, 0, b)
-#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_NONE __pgprot_modify(pgprot_default, PTE_TYPE_MASK, PTE_PROT_NONE)
#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
-#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE)
#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
/*
* The following only work if pte_present(). Undefined behaviour otherwise.
*/
-#define pte_present(pte) (pte_val(pte) & PTE_VALID)
+#define pte_present(pte) (pte_val(pte) & (PTE_VALID | PTE_PROT_NONE))
#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & PTE_AF)
#define pte_special(pte) (pte_val(pte) & PTE_SPECIAL)
#define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY))
#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN))
-#define pte_present_exec_user(pte) \
- ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
- (PTE_VALID | PTE_USER))
+#define pte_valid_user(pte) \
+ ((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
- if (pte_present_exec_user(pte))
- __sync_icache_dcache(pte, addr);
- if (!pte_dirty(pte))
- pte = pte_wrprotect(pte);
+ if (pte_valid_user(pte)) {
+ if (pte_exec(pte))
+ __sync_icache_dcache(pte, addr);
+ if (!pte_dirty(pte))
+ pte = pte_wrprotect(pte);
+ }
+
set_pte(ptep, pte);
}
#define pte_huge(pte) ((pte_val(pte) & PTE_TYPE_MASK) == PTE_TYPE_HUGEPAGE)
#define pte_mkhuge(pte) (__pte((pte_val(pte) & ~PTE_TYPE_MASK) | PTE_TYPE_HUGEPAGE))
-#define __pgprot_modify(prot,mask,bits) \
- __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
-
#define __HAVE_ARCH_PTE_SPECIAL
/*
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
+ const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
+ PTE_PROT_NONE | PTE_VALID;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}
__SYSCALL(371, compat_sys_open_by_handle_at)
__SYSCALL(372, compat_sys_clock_adjtime)
__SYSCALL(373, sys_syncfs)
+__SYSCALL(374, compat_sys_sendmmsg)
+__SYSCALL(375, sys_setns)
+__SYSCALL(376, compat_sys_process_vm_readv)
+__SYSCALL(377, compat_sys_process_vm_writev)
+__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */
-#define __NR_compat_syscalls 374
+#define __NR_compat_syscalls 379
/*
* Compat syscall numbers used by the AArch64 kernel.
void update_vsyscall_tz(void)
{
- ++vdso_data->tb_seq_count;
- smp_wmb();
vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
vdso_data->tz_dsttime = sys_tz.tz_dsttime;
- smp_wmb();
- ++vdso_data->tb_seq_count;
}
/* If tz is NULL, return 0. */
cbz x1, 3f
ldp w4, w5, [vdso_data, #VDSO_TZ_MINWEST]
- seqcnt_read w9
- seqcnt_check w9, 1b
stp w4, w5, [x1, #TZ_MINWEST]
3:
mov x0, xzr
read_unlock(&tasklist_lock);
}
-static inline int
-thread_matches (struct task_struct *thread, unsigned long addr)
-{
- unsigned long thread_rbs_end;
- struct pt_regs *thread_regs;
-
- if (ptrace_check_attach(thread, 0) < 0)
- /*
- * If the thread is not in an attachable state, we'll
- * ignore it. The net effect is that if ADDR happens
- * to overlap with the portion of the thread's
- * register backing store that is currently residing
- * on the thread's kernel stack, then ptrace() may end
- * up accessing a stale value. But if the thread
- * isn't stopped, that's a problem anyhow, so we're
- * doing as well as we can...
- */
- return 0;
-
- thread_regs = task_pt_regs(thread);
- thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL);
- if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end))
- return 0;
-
- return 1; /* looks like we've got a winner */
-}
-
/*
* Write f32-f127 back to task->thread.fph if it has been modified.
*/
*/
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
+#define KMAP_START 0
+#define KMAP_END 0xffffffff
#include <asm-generic/pgtable.h>
void *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+extern void init_pointer_table(unsigned long ptable);
+extern pmd_t *zero_pgtable;
+#endif
+
#ifdef CONFIG_MMU
pg_data_t pg_data_map[MAX_NUMNODES];
node_set_online(node);
}
-extern void init_pointer_table(unsigned long ptable);
-extern pmd_t *zero_pgtable;
-
#else /* CONFIG_MMU */
/*
else
LD_BFD := elf64-s390
LDFLAGS := -m elf64_s390
-KBUILD_AFLAGS_MODULE += -fpic -D__PIC__
-KBUILD_CFLAGS_MODULE += -fpic -D__PIC__
+KBUILD_AFLAGS_MODULE += -fPIC
+KBUILD_CFLAGS_MODULE += -fPIC
KBUILD_CFLAGS += -m64
KBUILD_AFLAGS += -m64
UTS_MACHINE := s390x
static inline unsigned long pmd_pfn(pmd_t pmd)
{
- if (pmd_trans_huge(pmd))
- return pmd_val(pmd) >> HPAGE_SHIFT;
- else
- return pmd_val(pmd) >> PAGE_SHIFT;
+ return pmd_val(pmd) >> PAGE_SHIFT;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
return get_clock_xt() - sched_clock_base_cc;
}
+/**
+ * tod_to_ns - convert a TOD format value to nanoseconds
+ * @todval: to be converted TOD format value
+ * Returns: number of nanoseconds that correspond to the TOD format value
+ *
+ * Converting a 64 Bit TOD format value to nanoseconds means that the value
+ * must be divided by 4.096. In order to achieve that we multiply with 125
+ * and divide by 512:
+ *
+ * ns = (todval * 125) >> 9;
+ *
+ * In order to avoid an overflow with the multiplication we can rewrite this.
+ * With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits)
+ * we end up with
+ *
+ * ns = ((2^32 * th + tl) * 125 ) >> 9;
+ * -> ns = (2^23 * th * 125) + ((tl * 125) >> 9);
+ *
+ */
+static inline unsigned long long tod_to_ns(unsigned long long todval)
+{
+ unsigned long long ns;
+
+ ns = ((todval >> 32) << 23) * 125;
+ ns += ((todval & 0xffffffff) * 125) >> 9;
+ return ns;
+}
+
#endif
*/
unsigned long long notrace __kprobes sched_clock(void)
{
- return (get_clock_monotonic() * 125) >> 9;
+ return tod_to_ns(get_clock_monotonic());
}
/*
return 0;
}
- sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9;
+ sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime);
kvm_s390_deliver_pending_interrupts(vcpu);
vcpu->arch.sie_block->icptcode = 0;
+ preempt_disable();
kvm_guest_enter();
+ preempt_enable();
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
trace_kvm_s390_sie_enter(vcpu,
* OFF-ON : MMC
*/
+/*
+ * FSI - DA7210
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set 'HeadPhone' 80
+ * amixer set 'Out Mixer Left DAC Left' on
+ * amixer set 'Out Mixer Right DAC Right' on
+ */
+
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };
if (vdso_enabled) \
NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
else \
- NEW_AUX_ENT(AT_IGNORE, 0);
+ NEW_AUX_ENT(AT_IGNORE, 0)
#else
-#define VSYSCALL_AUX_ENT
+#define VSYSCALL_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
#endif /* CONFIG_VSYSCALL */
#ifdef CONFIG_SH_FPU
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
+#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
/*
* Bit of SR register
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
+#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
/*
* Bit of SR register
#define __NR_process_vm_readv 365
#define __NR_process_vm_writev 366
#define __NR_kcmp 367
+#define __NR_finit_module 368
-#define NR_syscalls 368
+#define NR_syscalls 369
#endif /* __ASM_SH_UNISTD_32_H */
#define __NR_process_vm_readv 376
#define __NR_process_vm_writev 377
#define __NR_kcmp 378
+#define __NR_finit_module 379
-#define NR_syscalls 379
+#define NR_syscalls 380
#endif /* __ASM_SH_UNISTD_64_H */
.long sys_process_vm_readv /* 365 */
.long sys_process_vm_writev
.long sys_kcmp
+ .long sys_finit_module
.long sys_process_vm_readv
.long sys_process_vm_writev
.long sys_kcmp
+ .long sys_finit_module
.align 2
.L_init_thread_union:
.long init_thread_union
+.L_ebss:
+ .long __bss_stop
.Lpanic:
.long panic
.Lpanic_s:
#define __NR_process_vm_writev 339
#define __NR_kern_features 340
#define __NR_kcmp 341
+#define __NR_finit_module 342
-#define NR_syscalls 342
+#define NR_syscalls 343
/* Bitmask values returned from kern_features system call. */
#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
/* Cook up fake bus resources for SUNW,simba PCI bridges which lack
* a proper 'ranges' property.
*/
-static void apb_fake_ranges(struct pci_dev *dev, struct pci_bus *bus,
+static void apb_fake_ranges(struct pci_dev *dev,
+ struct pci_bus *bus,
struct pci_pbm_info *pbm)
{
struct pci_bus_region region;
pcibios_bus_to_resource(dev, res, ®ion);
}
-static void pci_of_scan_bus(struct pci_pbm_info *pbm, struct device_node *node,
+static void pci_of_scan_bus(struct pci_pbm_info *pbm,
+ struct device_node *node,
struct pci_bus *bus);
#define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1])
static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
- struct device_node *node, struct pci_dev *dev)
+ struct device_node *node,
+ struct pci_dev *dev)
{
struct pci_bus *bus;
const u32 *busrange, *ranges;
pci_of_scan_bus(pbm, node, bus);
}
-static void pci_of_scan_bus(struct pci_pbm_info *pbm, struct device_node *node,
+static void pci_of_scan_bus(struct pci_pbm_info *pbm,
+ struct device_node *node,
struct pci_bus *bus)
{
struct device_node *child;
pci_config_write8(addr, 64);
}
-static void psycho_scan_bus(struct pci_pbm_info *pbm, struct device *parent)
+static void psycho_scan_bus(struct pci_pbm_info *pbm,
+ struct device *parent)
{
pbm_config_busmastering(pbm);
pbm->is_66mhz_capable = 0;
sabre_register_error_handlers(pbm);
}
-static void sabre_pbm_init(struct pci_pbm_info *pbm, struct platform_device *op)
+static void sabre_pbm_init(struct pci_pbm_info *pbm,
+ struct platform_device *op)
{
psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
}
}
-static int schizo_pbm_init(struct pci_pbm_info *pbm, struct platform_device *op,
- u32 portid, int chip_type)
+static int schizo_pbm_init(struct pci_pbm_info *pbm,
+ struct platform_device *op, u32 portid,
+ int chip_type)
{
const struct linux_prom64_registers *regs;
struct device_node *dp = op->dev.of_node;
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
-/*340*/ .long sys_ni_syscall, sys_kcmp
+/*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
-/*340*/ .word sys_kern_features, sys_kcmp
+/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module
#endif /* CONFIG_COMPAT */
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
-/*340*/ .word sys_kern_features, sys_kcmp
+/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module
if (status != EFI_SUCCESS)
continue;
- if (!attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)
+ if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM))
continue;
if (!pci->romimage || !pci->romsize)
lea 16(%esp),%esp
CFI_ADJUST_CFA_OFFSET -16
jz 5f
- addl $16,%esp
jmp iret_exc
5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
+static bool __init snb_gfx_workaround_needed(void)
+{
+#ifdef CONFIG_PCI
+ int i;
+ u16 vendor, devid;
+ static const __initconst u16 snb_ids[] = {
+ 0x0102,
+ 0x0112,
+ 0x0122,
+ 0x0106,
+ 0x0116,
+ 0x0126,
+ 0x010a,
+ };
+
+ /* Assume no if something weird is going on with PCI */
+ if (!early_pci_allowed())
+ return false;
+
+ vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID);
+ if (vendor != 0x8086)
+ return false;
+
+ devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID);
+ for (i = 0; i < ARRAY_SIZE(snb_ids); i++)
+ if (devid == snb_ids[i])
+ return true;
+#endif
+
+ return false;
+}
+
+/*
+ * Sandy Bridge graphics has trouble with certain ranges, exclude
+ * them from allocation.
+ */
+static void __init trim_snb_memory(void)
+{
+ static const __initconst unsigned long bad_pages[] = {
+ 0x20050000,
+ 0x20110000,
+ 0x20130000,
+ 0x20138000,
+ 0x40004000,
+ };
+ int i;
+
+ if (!snb_gfx_workaround_needed())
+ return;
+
+ printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n");
+
+ /*
+ * Reserve all memory below the 1 MB mark that has not
+ * already been reserved.
+ */
+ memblock_reserve(0, 1<<20);
+
+ for (i = 0; i < ARRAY_SIZE(bad_pages); i++) {
+ if (memblock_reserve(bad_pages[i], PAGE_SIZE))
+ printk(KERN_WARNING "failed to reserve 0x%08lx\n",
+ bad_pages[i]);
+ }
+}
+
+/*
+ * Here we put platform-specific memory range workarounds, i.e.
+ * memory known to be corrupt or otherwise in need to be reserved on
+ * specific platforms.
+ *
+ * If this gets used more widely it could use a real dispatch mechanism.
+ */
+static void __init trim_platform_memory_ranges(void)
+{
+ trim_snb_memory();
+}
+
static void __init trim_bios_range(void)
{
/*
* take them out.
*/
e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
+
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
}
setup_real_mode();
+ trim_platform_memory_ranges();
+
init_gbpages();
/* max_pfn_mapped is updated here */
* Ensure irq/preemption can't change debugctl in between.
* Note also that both TIF_BLOCKSTEP and debugctl should
* be changed atomically wrt preemption.
- * FIXME: this means that set/clear TIF_BLOCKSTEP is simply
- * wrong if task != current, SIGKILL can wakeup the stopped
- * tracee and set/clear can play with the running task, this
- * can confuse the next __switch_to_xtra().
+ *
+ * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if
+ * task is current or it can't be running, otherwise we can race
+ * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but
+ * PTRACE_KILL is not safe.
*/
local_irq_disable();
debugctl = get_debugctlmsr();
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
- /*
- * Balance out the preempt calls - as we are running in cpu_idle
- * loop which has been called at bootup from cpu_bringup_and_idle.
- * The cpucpu_bringup_and_idle called cpu_bringup which made a
- * preempt_disable() So this preempt_enable will balance it out.
- */
- preempt_enable();
}
#else /* !CONFIG_HOTPLUG_CPU */
if (!ret) {
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_get_name(dev->acpi_handle, ACPI_FULL_PATHNAME, &buffer);
+ acpi_get_name(ACPI_HANDLE(dev), ACPI_FULL_PATHNAME, &buffer);
DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
kfree(buffer.pointer);
} else
* by the cpu device.
*
* Never copy this way of doing things, or you too will be made fun of
- * on the linux-kerenl list, you have been warned.
+ * on the linux-kernel list, you have been warned.
*/
}
char *buf;
size = fw_file_size(file);
- if (size < 0)
+ if (size <= 0)
return false;
buf = vmalloc(size);
if (!buf)
.llseek = default_llseek,
};
+static void regmap_debugfs_free_dump_cache(struct regmap *map)
+{
+ struct regmap_debugfs_off_cache *c;
+
+ while (!list_empty(&map->debugfs_off_cache)) {
+ c = list_first_entry(&map->debugfs_off_cache,
+ struct regmap_debugfs_off_cache,
+ list);
+ list_del(&c->list);
+ kfree(c);
+ }
+}
+
/*
* Work out where the start offset maps into register numbers, bearing
* in mind that we suppress hidden registers.
/* No cache entry? Start a new one */
if (!c) {
c = kzalloc(sizeof(*c), GFP_KERNEL);
- if (!c)
- break;
+ if (!c) {
+ regmap_debugfs_free_dump_cache(map);
+ return base;
+ }
c->min = p;
c->base_reg = i;
}
}
}
+ /* Close the last entry off if we didn't scan beyond it */
+ if (c) {
+ c->max = p - 1;
+ list_add_tail(&c->list,
+ &map->debugfs_off_cache);
+ } else {
+ return base;
+ }
+
+ /*
+ * This should never happen; we return above if we fail to
+ * allocate and we should never be in this code if there are
+ * no registers at all.
+ */
+ if (list_empty(&map->debugfs_off_cache)) {
+ WARN_ON(list_empty(&map->debugfs_off_cache));
+ return base;
+ }
+
/* Find the relevant block */
list_for_each_entry(c, &map->debugfs_off_cache, list) {
- if (*pos >= c->min && *pos <= c->max) {
+ if (from >= c->min && from <= c->max) {
*pos = c->min;
return c->base_reg;
}
- ret = c->max;
+ *pos = c->min;
+ ret = c->base_reg;
}
return ret;
void regmap_debugfs_exit(struct regmap *map)
{
- struct regmap_debugfs_off_cache *c;
-
debugfs_remove_recursive(map->debugfs);
- while (!list_empty(&map->debugfs_off_cache)) {
- c = list_first_entry(&map->debugfs_off_cache,
- struct regmap_debugfs_off_cache,
- list);
- list_del(&c->list);
- kfree(c);
- }
+ regmap_debugfs_free_dump_cache(map);
kfree(map->debugfs_name);
}
{
struct virtio_blk *vblk = vdev->priv;
int index = vblk->index;
+ int refc;
/* Prevent config work handler from accessing the device. */
mutex_lock(&vblk->config_lock);
flush_work(&vblk->config_work);
+ refc = atomic_read(&disk_to_dev(vblk->disk)->kobj.kref.refcount);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
vdev->config->del_vqs(vdev);
kfree(vblk);
- ida_simple_remove(&vd_index_ida, index);
+
+ /* Only free device id if we don't have any users */
+ if (refc == 1)
+ ida_simple_remove(&vd_index_ida, index);
}
#ifdef CONFIG_PM
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
- int i, dead_state = -1;
- int power_usage = INT_MAX;
+ int i;
if (!drv)
return -ENODEV;
/* Find lowest-power state that supports long-term idle */
- for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) {
- struct cpuidle_state *s = &drv->states[i];
-
- if (s->power_usage < power_usage && s->enter_dead) {
- power_usage = s->power_usage;
- dead_state = i;
- }
- }
-
- if (dead_state != -1)
- return drv->states[dead_state].enter_dead(dev, dead_state);
+ for (i = drv->state_count - 1; i >= CPUIDLE_DRIVER_STATE_START; i--)
+ if (drv->states[i].enter_dead)
+ return drv->states[i].enter_dead(dev, i);
return -ENODEV;
}
static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu);
static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu);
-static void set_power_states(struct cpuidle_driver *drv)
-{
- int i;
-
- /*
- * cpuidle driver should set the drv->power_specified bit
- * before registering if the driver provides
- * power_usage numbers.
- *
- * If power_specified is not set,
- * we fill in power_usage with decreasing values as the
- * cpuidle code has an implicit assumption that state Cn
- * uses less power than C(n-1).
- *
- * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
- * an power value of -1. So we use -2, -3, etc, for other
- * c-states.
- */
- for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++)
- drv->states[i].power_usage = -1 - i;
-}
-
static void __cpuidle_driver_init(struct cpuidle_driver *drv)
{
drv->refcnt = 0;
-
- if (!drv->power_specified)
- set_power_states(drv);
}
static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
- int power_usage = INT_MAX;
int i;
int multiplier;
struct timespec t;
if (s->exit_latency * multiplier > data->predicted_us)
continue;
- if (s->power_usage < power_usage) {
- power_usage = s->power_usage;
- data->last_state_idx = i;
- data->exit_us = s->exit_latency;
- }
+ data->last_state_idx = i;
+ data->exit_us = s->exit_latency;
}
/* not deepest C-state chosen for low predicted residency */
struct cpuidle_driver *drv = cpuidle_get_cpu_driver(device);
/* state statistics */
- for (i = 0; i < drv->state_count; i++) {
+ for (i = 0; i < device->state_count; i++) {
kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
if (!kobj)
goto error_state;
seq_printf(m, "%s command stream:\n", ring_str(ring));
seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]);
seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]);
+ seq_printf(m, " CTL: 0x%08x\n", error->ctl[ring]);
seq_printf(m, " ACTHD: 0x%08x\n", error->acthd[ring]);
seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir[ring]);
seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr[ring]);
seq_printf(m, "EIR: 0x%08x\n", error->eir);
seq_printf(m, "IER: 0x%08x\n", error->ier);
seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+ seq_printf(m, "FORCEWAKE: 0x%08x\n", error->forcewake);
+ seq_printf(m, "DERRMR: 0x%08x\n", error->derrmr);
seq_printf(m, "CCID: 0x%08x\n", error->ccid);
for (i = 0; i < dev_priv->num_fence_regs; i++)
u32 pgtbl_er;
u32 ier;
u32 ccid;
+ u32 derrmr;
+ u32 forcewake;
bool waiting[I915_NUM_RINGS];
u32 pipestat[I915_MAX_PIPES];
u32 tail[I915_NUM_RINGS];
u32 head[I915_NUM_RINGS];
+ u32 ctl[I915_NUM_RINGS];
u32 ipeir[I915_NUM_RINGS];
u32 ipehr[I915_NUM_RINGS];
u32 instdone[I915_NUM_RINGS];
total = 0;
for (i = 0; i < count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
+ u64 invalid_offset = (u64)-1;
+ int j;
user_relocs = (void __user *)(uintptr_t)exec[i].relocs_ptr;
goto err;
}
+ /* As we do not update the known relocation offsets after
+ * relocating (due to the complexities in lock handling),
+ * we need to mark them as invalid now so that we force the
+ * relocation processing next time. Just in case the target
+ * object is evicted and then rebound into its old
+ * presumed_offset before the next execbuffer - if that
+ * happened we would make the mistake of assuming that the
+ * relocations were valid.
+ */
+ for (j = 0; j < exec[i].relocation_count; j++) {
+ if (copy_to_user(&user_relocs[j].presumed_offset,
+ &invalid_offset,
+ sizeof(invalid_offset))) {
+ ret = -EFAULT;
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+ }
+
reloc_offset[i] = total;
total += exec[i].relocation_count;
}
error->acthd[ring->id] = intel_ring_get_active_head(ring);
error->head[ring->id] = I915_READ_HEAD(ring);
error->tail[ring->id] = I915_READ_TAIL(ring);
+ error->ctl[ring->id] = I915_READ_CTL(ring);
error->cpu_ring_head[ring->id] = ring->head;
error->cpu_ring_tail[ring->id] = ring->tail;
else
error->ier = I915_READ(IER);
+ if (INTEL_INFO(dev)->gen >= 6)
+ error->derrmr = I915_READ(DERRMR);
+
+ if (IS_VALLEYVIEW(dev))
+ error->forcewake = I915_READ(FORCEWAKE_VLV);
+ else if (INTEL_INFO(dev)->gen >= 7)
+ error->forcewake = I915_READ(FORCEWAKE_MT);
+ else if (INTEL_INFO(dev)->gen == 6)
+ error->forcewake = I915_READ(FORCEWAKE);
+
for_each_pipe(pipe)
error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
#define GEN7_ERR_INT 0x44040
#define ERR_INT_MMIO_UNCLAIMED (1<<13)
+#define DERRMR 0x44050
+
/* GM45+ chicken bits -- debug workaround bits that may be required
* for various sorts of correct behavior. The top 16 bits of each are
* the enables for writing to the corresponding low bit.
static void
intel_dp_init_panel_power_sequencer(struct drm_device *dev,
- struct intel_dp *intel_dp)
+ struct intel_dp *intel_dp,
+ struct edp_power_seq *out)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct edp_power_seq cur, vbt, spec, final;
intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
#undef get_delay
+ DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
+ intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
+ intel_dp->panel_power_cycle_delay);
+
+ DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
+ intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+
+ if (out)
+ *out = final;
+}
+
+static void
+intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
+ struct intel_dp *intel_dp,
+ struct edp_power_seq *seq)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_on, pp_off, pp_div;
+
/* And finally store the new values in the power sequencer. */
- pp_on = (final.t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
- (final.t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
- pp_off = (final.t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
- (final.t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
+ pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
+ (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
+ pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
+ (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1)
<< PP_REFERENCE_DIVIDER_SHIFT;
- pp_div |= (DIV_ROUND_UP(final.t11_t12, 1000)
+ pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
<< PANEL_POWER_CYCLE_DELAY_SHIFT);
/* Haswell doesn't have any port selection bits for the panel
I915_WRITE(PCH_PP_OFF_DELAYS, pp_off);
I915_WRITE(PCH_PP_DIVISOR, pp_div);
-
- DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
- intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
- intel_dp->panel_power_cycle_delay);
-
- DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
- intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
-
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
I915_READ(PCH_PP_ON_DELAYS),
I915_READ(PCH_PP_OFF_DELAYS),
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *fixed_mode = NULL;
+ struct edp_power_seq power_seq = { 0 };
enum port port = intel_dig_port->port;
const char *name = NULL;
int type;
}
if (is_edp(intel_dp))
- intel_dp_init_panel_power_sequencer(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
intel_dp_i2c_init(intel_dp, intel_connector, name);
return;
}
+ /* We now know it's not a ghost, init power sequence regs. */
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
+ &power_seq);
+
ironlake_edp_panel_vdd_on(intel_dp);
edid = drm_get_edid(connector, &intel_dp->adapter);
if (edid) {
static void __gen6_gt_force_wake_mt_reset(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(0xffff));
- POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
+ /* something from same cacheline, but !FORCEWAKE_MT */
+ POSTING_READ(ECOBUS);
}
static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
- POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
+ /* something from same cacheline, but !FORCEWAKE_MT */
+ POSTING_READ(ECOBUS);
if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
FORCEWAKE_ACK_TIMEOUT_MS))
static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE, 0);
- /* gen6_gt_check_fifodbg doubles as the POSTING_READ */
+ /* something from same cacheline, but !FORCEWAKE */
+ POSTING_READ(ECOBUS);
gen6_gt_check_fifodbg(dev_priv);
}
static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
- /* gen6_gt_check_fifodbg doubles as the POSTING_READ */
+ /* something from same cacheline, but !FORCEWAKE_MT */
+ POSTING_READ(ECOBUS);
gen6_gt_check_fifodbg(dev_priv);
}
static void vlv_force_wake_reset(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(0xffff));
+ /* something from same cacheline, but !FORCEWAKE_VLV */
+ POSTING_READ(FORCEWAKE_ACK_VLV);
}
static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
static void vlv_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
- /* The below doubles as a POSTING_READ */
+ /* something from same cacheline, but !FORCEWAKE_VLV */
+ POSTING_READ(FORCEWAKE_ACK_VLV);
gen6_gt_check_fifodbg(dev_priv);
}
ret = nouveau_handle_create(nv_object(client), ~0, ~0,
nv_object(client), &client->root);
- if (ret) {
- nouveau_namedb_destroy(&client->base);
+ if (ret)
return ret;
- }
/* prevent init/fini being called, os in in charge of this */
atomic_set(&nv_object(client)->usecount, 2);
while (!nv_iclass(namedb, NV_NAMEDB_CLASS))
namedb = namedb->parent;
- handle = *phandle = kzalloc(sizeof(*handle), GFP_KERNEL);
+ handle = kzalloc(sizeof(*handle), GFP_KERNEL);
if (!handle)
return -ENOMEM;
}
hprintk(handle, TRACE, "created\n");
+
+ *phandle = handle;
+
return 0;
}
for (i = 0; !(ctrl & (1 << head)) && i < 3; i++)
ctrl = nv_rd32(priv, 0x610b5c + (i * 8));
- if (nv_device(priv)->chipset < 0x90 ||
- nv_device(priv)->chipset == 0x92 ||
- nv_device(priv)->chipset == 0xa0) {
- for (i = 0; !(ctrl & (1 << head)) && i < 2; i++)
- ctrl = nv_rd32(priv, 0x610b74 + (i * 8));
- i += 3;
- } else {
- for (i = 0; !(ctrl & (1 << head)) && i < 4; i++)
- ctrl = nv_rd32(priv, 0x610798 + (i * 8));
- i += 3;
+ if (!(ctrl & (1 << head))) {
+ if (nv_device(priv)->chipset < 0x90 ||
+ nv_device(priv)->chipset == 0x92 ||
+ nv_device(priv)->chipset == 0xa0) {
+ for (i = 0; !(ctrl & (1 << head)) && i < 2; i++)
+ ctrl = nv_rd32(priv, 0x610b74 + (i * 8));
+ i += 4;
+ } else {
+ for (i = 0; !(ctrl & (1 << head)) && i < 4; i++)
+ ctrl = nv_rd32(priv, 0x610798 + (i * 8));
+ i += 4;
+ }
}
if (!(ctrl & (1 << head)))
return false;
+ i--;
data = exec_lookup(priv, head, i, ctrl, &dcb, &ver, &hdr, &cnt, &len, &info);
if (data) {
for (i = 0; !(ctrl & (1 << head)) && i < 3; i++)
ctrl = nv_rd32(priv, 0x610b58 + (i * 8));
- if (nv_device(priv)->chipset < 0x90 ||
- nv_device(priv)->chipset == 0x92 ||
- nv_device(priv)->chipset == 0xa0) {
- for (i = 0; !(ctrl & (1 << head)) && i < 2; i++)
- ctrl = nv_rd32(priv, 0x610b70 + (i * 8));
- i += 3;
- } else {
- for (i = 0; !(ctrl & (1 << head)) && i < 4; i++)
- ctrl = nv_rd32(priv, 0x610794 + (i * 8));
- i += 3;
+ if (!(ctrl & (1 << head))) {
+ if (nv_device(priv)->chipset < 0x90 ||
+ nv_device(priv)->chipset == 0x92 ||
+ nv_device(priv)->chipset == 0xa0) {
+ for (i = 0; !(ctrl & (1 << head)) && i < 2; i++)
+ ctrl = nv_rd32(priv, 0x610b70 + (i * 8));
+ i += 4;
+ } else {
+ for (i = 0; !(ctrl & (1 << head)) && i < 4; i++)
+ ctrl = nv_rd32(priv, 0x610794 + (i * 8));
+ i += 4;
+ }
}
if (!(ctrl & (1 << head)))
return 0x0000;
+ i--;
data = exec_lookup(priv, head, i, ctrl, outp, &ver, &hdr, &cnt, &len, &info1);
if (!data)
int nouveau_client_create_(const char *name, u64 device, const char *cfg,
const char *dbg, int, void **);
+#define nouveau_client_destroy(p) \
+ nouveau_namedb_destroy(&(p)->base)
+
int nouveau_client_init(struct nouveau_client *);
int nouveau_client_fini(struct nouveau_client *, bool suspend);
PLL_UNK42 = 0x42,
PLL_VPLL0 = 0x80,
PLL_VPLL1 = 0x81,
+ PLL_VPLL2 = 0x82,
+ PLL_VPLL3 = 0x83,
PLL_MAX = 0xff
};
mdelay(10);
init_wr32(init, 0x614100, 0x10000018);
init_wr32(init, 0x614900, 0x10000018);
- return;
}
value = init_rdport(init, port) & mask;
switch (info.type) {
case PLL_VPLL0:
case PLL_VPLL1:
+ case PLL_VPLL2:
+ case PLL_VPLL3:
nv_mask(priv, info.reg + 0x0c, 0x00000000, 0x00000100);
nv_wr32(priv, info.reg + 0x04, (P << 16) | (N << 8) | M);
nv_wr32(priv, info.reg + 0x10, fN << 16);
mem->memtype = type;
mem->size = size;
- mutex_lock(&mm->mutex);
+ mutex_lock(&pfb->base.mutex);
do {
if (back)
ret = nouveau_mm_tail(mm, 1, size, ncmin, align, &r);
else
ret = nouveau_mm_head(mm, 1, size, ncmin, align, &r);
if (ret) {
- mutex_unlock(&mm->mutex);
+ mutex_unlock(&pfb->base.mutex);
pfb->ram.put(pfb, &mem);
return ret;
}
list_add_tail(&r->rl_entry, &mem->regions);
size -= r->length;
} while (size);
- mutex_unlock(&mm->mutex);
+ mutex_unlock(&pfb->base.mutex);
r = list_first_entry(&mem->regions, struct nouveau_mm_node, rl_entry);
mem->offset = (u64)r->offset << 12;
if (ret)
return ret;
+ mutex_lock(&imem->base.mutex);
list_add(&iobj->head, &imem->list);
+ mutex_unlock(&imem->base.mutex);
return 0;
}
void
nouveau_instobj_destroy(struct nouveau_instobj *iobj)
{
- if (iobj->head.prev)
- list_del(&iobj->head);
+ struct nouveau_subdev *subdev = nv_subdev(iobj->base.engine);
+
+ mutex_lock(&subdev->mutex);
+ list_del(&iobj->head);
+ mutex_unlock(&subdev->mutex);
+
return nouveau_object_destroy(&iobj->base);
}
if (ret)
return ret;
+ mutex_lock(&imem->base.mutex);
+
list_for_each_entry(iobj, &imem->list, head) {
if (iobj->suspend) {
for (i = 0; i < iobj->size; i += 4)
}
}
+ mutex_unlock(&imem->base.mutex);
+
return 0;
}
nouveau_instmem_fini(struct nouveau_instmem *imem, bool suspend)
{
struct nouveau_instobj *iobj;
- int i;
+ int i, ret = 0;
if (suspend) {
+ mutex_lock(&imem->base.mutex);
+
list_for_each_entry(iobj, &imem->list, head) {
iobj->suspend = vmalloc(iobj->size);
- if (iobj->suspend) {
- for (i = 0; i < iobj->size; i += 4)
- iobj->suspend[i / 4] = nv_ro32(iobj, i);
- } else
- return -ENOMEM;
+ if (!iobj->suspend) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ for (i = 0; i < iobj->size; i += 4)
+ iobj->suspend[i / 4] = nv_ro32(iobj, i);
}
+
+ mutex_unlock(&imem->base.mutex);
+
+ if (ret)
+ return ret;
}
return nouveau_subdev_fini(&imem->base, suspend);
u64 mm_length = (offset + length) - mm_offset;
int ret;
- vm = *pvm = kzalloc(sizeof(*vm), GFP_KERNEL);
+ vm = kzalloc(sizeof(*vm), GFP_KERNEL);
if (!vm)
return -ENOMEM;
return ret;
}
+ *pvm = vm;
+
return 0;
}
struct nouveau_encoder **pnv_encoder)
{
struct drm_device *dev = connector->dev;
+ struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_drm *drm = nouveau_drm(dev);
+ struct nouveau_gpio *gpio = nouveau_gpio(drm->device);
struct nouveau_i2c *i2c = nouveau_i2c(drm->device);
- int i;
+ struct nouveau_i2c_port *port = NULL;
+ int i, panel = -ENODEV;
+
+ /* eDP panels need powering on by us (if the VBIOS doesn't default it
+ * to on) before doing any AUX channel transactions. LVDS panel power
+ * is handled by the SOR itself, and not required for LVDS DDC.
+ */
+ if (nv_connector->type == DCB_CONNECTOR_eDP) {
+ panel = gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff);
+ if (panel == 0) {
+ gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1);
+ msleep(300);
+ }
+ }
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
- struct nouveau_i2c_port *port = NULL;
struct nouveau_encoder *nv_encoder;
struct drm_mode_object *obj;
int id;
port = i2c->find(i2c, nv_encoder->dcb->i2c_index);
if (port && nv_probe_i2c(port, 0x50)) {
*pnv_encoder = nv_encoder;
- return port;
+ break;
}
+
+ port = NULL;
}
- return NULL;
+ /* eDP panel not detected, restore panel power GPIO to previous
+ * state to avoid confusing the SOR for other output types.
+ */
+ if (!port && panel == 0)
+ gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel);
+
+ return port;
}
static struct nouveau_encoder *
if (ret)
return ret;
- /* power on internal panel if it's not already. the init tables of
- * some vbios default this to off for some reason, causing the
- * panel to not work after resume
- */
- if (gpio && gpio->get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff) == 0) {
- gpio->set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1);
- msleep(300);
- }
-
/* enable polling for external displays */
drm_kms_helper_poll_enable(dev);
struct nouveau_cli *cli;
int ret;
+ *pcli = NULL;
ret = nouveau_client_create_(name, nouveau_name(pdev), nouveau_config,
nouveau_debug, size, pcli);
cli = *pcli;
- if (ret)
+ if (ret) {
+ if (cli)
+ nouveau_client_destroy(&cli->base);
+ *pcli = NULL;
return ret;
+ }
mutex_init(&cli->mutex);
return 0;
void nv10_fence_context_del(struct nouveau_channel *);
void nv10_fence_destroy(struct nouveau_drm *);
int nv10_fence_create(struct nouveau_drm *);
+void nv17_fence_resume(struct nouveau_drm *drm);
int nv50_fence_create(struct nouveau_drm *);
int nv84_fence_create(struct nouveau_drm *);
static inline bool is_powersaving_dpms(int mode)
{
- return (mode != DRM_MODE_DPMS_ON);
+ return mode != DRM_MODE_DPMS_ON && mode != NV_DPMS_CLEARED;
}
static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
kfree(priv);
}
+void nv17_fence_resume(struct nouveau_drm *drm)
+{
+ struct nv10_fence_priv *priv = drm->fence;
+
+ nouveau_bo_wr32(priv->bo, 0, priv->sequence);
+}
+
int
nv10_fence_create(struct nouveau_drm *drm)
{
if (ret == 0) {
nouveau_bo_wr32(priv->bo, 0x000, 0x00000000);
priv->base.sync = nv17_fence_sync;
+ priv->base.resume = nv17_fence_resume;
}
}
if (ret == 0) {
nouveau_bo_wr32(priv->bo, 0x000, 0x00000000);
priv->base.sync = nv17_fence_sync;
+ priv->base.resume = nv17_fence_resume;
}
if (ret)
{
struct evergreen_mc_save save;
+ if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE))
+ reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE);
+
+ if (RREG32(DMA_STATUS_REG) & DMA_IDLE)
+ reset_mask &= ~RADEON_RESET_DMA;
+
if (reset_mask == 0)
return 0;
{
struct evergreen_mc_save save;
+ if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE))
+ reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE);
+
+ if (RREG32(DMA_STATUS_REG) & DMA_IDLE)
+ reset_mask &= ~RADEON_RESET_DMA;
+
if (reset_mask == 0)
return 0;
{
struct rv515_mc_save save;
+ if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE))
+ reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE);
+
+ if (RREG32(DMA_STATUS_REG) & DMA_IDLE)
+ reset_mask &= ~RADEON_RESET_DMA;
+
if (reset_mask == 0)
return 0;
kfree(parser->relocs);
for (i = 0; i < parser->nchunks; i++) {
kfree(parser->chunks[i].kdata);
- kfree(parser->chunks[i].kpage[0]);
- kfree(parser->chunks[i].kpage[1]);
+ if (parser->rdev && (parser->rdev->flags & RADEON_IS_AGP)) {
+ kfree(parser->chunks[i].kpage[0]);
+ kfree(parser->chunks[i].kpage[1]);
+ }
}
kfree(parser->chunks);
kfree(parser->chunks_array);
struct radeon_cs_chunk *relocs_chunk;
unsigned idx;
+ *cs_reloc = NULL;
if (p->chunk_relocs_idx == -1) {
DRM_ERROR("No relocation chunk !\n");
return -EINVAL;
}
- *cs_reloc = NULL;
relocs_chunk = &p->chunks[p->chunk_relocs_idx];
idx = p->dma_reloc_idx;
- if (idx >= relocs_chunk->length_dw) {
+ if (idx >= p->nrelocs) {
DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
- idx, relocs_chunk->length_dw);
+ idx, p->nrelocs);
return -EINVAL;
}
*cs_reloc = p->relocs_ptr[idx];
struct list_head list;
/* Protected by tbo.reserved */
u32 placements[3];
- u32 busy_placements[3];
struct ttm_placement placement;
struct ttm_buffer_object tbo;
struct ttm_bo_kmap_obj kmap;
u32 ptr_reg_mask;
u32 nop;
u32 idx;
+ u64 last_semaphore_signal_addr;
+ u64 last_semaphore_wait_addr;
};
/*
p->chunks[p->chunk_ib_idx].length_dw);
return -EINVAL;
}
- if ((p->rdev->flags & RADEON_IS_AGP)) {
+ if (p->rdev && (p->rdev->flags & RADEON_IS_AGP)) {
p->chunks[p->chunk_ib_idx].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
p->chunks[p->chunk_ib_idx].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (p->chunks[p->chunk_ib_idx].kpage[0] == NULL ||
p->chunks[p->chunk_ib_idx].kpage[1] == NULL) {
- kfree(p->chunks[i].kpage[0]);
- kfree(p->chunks[i].kpage[1]);
+ kfree(p->chunks[p->chunk_ib_idx].kpage[0]);
+ kfree(p->chunks[p->chunk_ib_idx].kpage[1]);
return -ENOMEM;
}
}
struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
int i;
int size = PAGE_SIZE;
- bool copy1 = (p->rdev->flags & RADEON_IS_AGP) ? false : true;
+ bool copy1 = (p->rdev && (p->rdev->flags & RADEON_IS_AGP)) ?
+ false : true;
for (i = ibc->last_copied_page + 1; i < pg_idx; i++) {
if (DRM_COPY_FROM_USER(p->ib.ptr + (i * (PAGE_SIZE/4)),
* 2.26.0 - r600-eg: fix htile size computation
* 2.27.0 - r600-SI: Add CS ioctl support for async DMA
* 2.28.0 - r600-eg: Add MEM_WRITE packet support
+ * 2.29.0 - R500 FP16 color clear registers
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 28
+#define KMS_DRIVER_MINOR 29
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
enum drm_connector_status found = connector_status_disconnected;
bool color = true;
+ /* just don't bother on RN50 those chip are often connected to remoting
+ * console hw and often we get failure to load detect those. So to make
+ * everyone happy report the encoder as always connected.
+ */
+ if (ASIC_IS_RN50(rdev)) {
+ return connector_status_connected;
+ }
+
/* save the regs we need */
vclk_ecp_cntl = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
rbo->placement.fpfn = 0;
rbo->placement.lpfn = 0;
rbo->placement.placement = rbo->placements;
+ rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED |
TTM_PL_FLAG_VRAM;
if (!c)
rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM;
rbo->placement.num_placement = c;
-
- c = 0;
- rbo->placement.busy_placement = rbo->busy_placements;
- if (rbo->rdev->flags & RADEON_IS_AGP) {
- rbo->busy_placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_TT;
- } else {
- rbo->busy_placements[c++] = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_TT;
- }
rbo->placement.num_busy_placement = c;
}
{
struct radeon_bo_list *lobj;
struct radeon_bo *bo;
+ u32 domain;
int r;
r = ttm_eu_reserve_buffers(head);
list_for_each_entry(lobj, head, tv.head) {
bo = lobj->bo;
if (!bo->pin_count) {
+ domain = lobj->wdomain ? lobj->wdomain : lobj->rdomain;
+
+ retry:
+ radeon_ttm_placement_from_domain(bo, domain);
r = ttm_bo_validate(&bo->tbo, &bo->placement,
true, false);
if (unlikely(r)) {
+ if (r != -ERESTARTSYS && domain == RADEON_GEM_DOMAIN_VRAM) {
+ domain |= RADEON_GEM_DOMAIN_GTT;
+ goto retry;
+ }
return r;
}
}
}
seq_printf(m, "driver's copy of the wptr: 0x%08x [%5d]\n", ring->wptr, ring->wptr);
seq_printf(m, "driver's copy of the rptr: 0x%08x [%5d]\n", ring->rptr, ring->rptr);
+ seq_printf(m, "last semaphore signal addr : 0x%016llx\n", ring->last_semaphore_signal_addr);
+ seq_printf(m, "last semaphore wait addr : 0x%016llx\n", ring->last_semaphore_wait_addr);
seq_printf(m, "%u free dwords in ring\n", ring->ring_free_dw);
seq_printf(m, "%u dwords in ring\n", count);
/* print 8 dw before current rptr as often it's the last executed
/* we assume caller has already allocated space on waiters ring */
radeon_semaphore_emit_wait(rdev, waiter, semaphore);
+ /* for debugging lockup only, used by sysfs debug files */
+ rdev->ring[signaler].last_semaphore_signal_addr = semaphore->gpu_addr;
+ rdev->ring[waiter].last_semaphore_wait_addr = semaphore->gpu_addr;
+
return 0;
}
0x46AC US_OUT_FMT_2
0x46B0 US_OUT_FMT_3
0x46B4 US_W_FMT
+0x46C0 RB3D_COLOR_CLEAR_VALUE_AR
+0x46C4 RB3D_COLOR_CLEAR_VALUE_GB
0x4BC0 FG_FOG_BLEND
0x4BC4 FG_FOG_FACTOR
0x4BC8 FG_FOG_COLOR_R
{
struct evergreen_mc_save save;
+ if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE))
+ reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE);
+
+ if (RREG32(DMA_STATUS_REG) & DMA_IDLE)
+ reset_mask &= ~RADEON_RESET_DMA;
+
if (reset_mask == 0)
return 0;
bo->mem = tmp_mem;
bdev->driver->move_notify(bo, mem);
bo->mem = *mem;
+ *mem = tmp_mem;
}
goto out_err;
if (ttm->state == tt_unpopulated) {
ret = ttm->bdev->driver->ttm_tt_populate(ttm);
- if (ret)
+ if (ret) {
+ /* if we fail here don't nuke the mm node
+ * as the bo still owns it */
+ old_copy.mm_node = NULL;
goto out1;
+ }
}
add = 0;
prot);
} else
ret = ttm_copy_io_page(new_iomap, old_iomap, page);
- if (ret)
+ if (ret) {
+ /* failing here, means keep old copy as-is */
+ old_copy.mm_node = NULL;
goto out1;
+ }
}
mb();
out2:
static u8 *udl_get_edid(struct udl_device *udl)
{
u8 *block;
- char rbuf[3];
+ char *rbuf;
int ret, i;
block = kmalloc(EDID_LENGTH, GFP_KERNEL);
if (block == NULL)
return NULL;
+ rbuf = kmalloc(2, GFP_KERNEL);
+ if (rbuf == NULL)
+ goto error;
+
for (i = 0; i < EDID_LENGTH; i++) {
ret = usb_control_msg(udl->ddev->usbdev,
usb_rcvctrlpipe(udl->ddev->usbdev, 0), (0x02),
HZ);
if (ret < 1) {
DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
- i--;
goto error;
}
block[i] = rbuf[1];
}
+ kfree(rbuf);
return block;
error:
kfree(block);
+ kfree(rbuf);
return NULL;
}
edid = (struct edid *)udl_get_edid(udl);
+ /*
+ * We only read the main block, but if the monitor reports extension
+ * blocks then the drm edid code expects them to be present, so patch
+ * the extension count to 0.
+ */
+ edid->checksum += edid->extensions;
+ edid->extensions = 0;
+
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
*/
struct dm_info_msg {
- struct dm_info_header header;
+ struct dm_header hdr;
__u32 reserved;
__u32 info_size;
__u8 info[];
static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
{
- switch (msg->header.type) {
+ struct dm_info_header *info_hdr;
+
+ info_hdr = (struct dm_info_header *)msg->info;
+
+ switch (info_hdr->type) {
case INFO_TYPE_MAX_PAGE_CNT:
pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n");
- pr_info("Data Size is %d\n", msg->header.data_size);
+ pr_info("Data Size is %d\n", info_hdr->data_size);
break;
default:
- pr_info("Received Unknown type: %d\n", msg->header.type);
+ pr_info("Received Unknown type: %d\n", info_hdr->type);
}
}
balloon_onchannelcallback, dev);
if (ret)
- return ret;
+ goto probe_error0;
dm_device.dev = dev;
dm_device.state = DM_INITIALIZING;
kthread_run(dm_thread_func, &dm_device, "hv_balloon");
if (IS_ERR(dm_device.thread)) {
ret = PTR_ERR(dm_device.thread);
- goto probe_error0;
+ goto probe_error1;
}
hv_set_drvdata(dev, &dm_device);
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret)
- goto probe_error1;
+ goto probe_error2;
t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ);
if (t == 0) {
ret = -ETIMEDOUT;
- goto probe_error1;
+ goto probe_error2;
}
/*
*/
if (dm_device.state == DM_INIT_ERROR) {
ret = -ETIMEDOUT;
- goto probe_error1;
+ goto probe_error2;
}
/*
* Now submit our capabilities to the host.
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret)
- goto probe_error1;
+ goto probe_error2;
t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ);
if (t == 0) {
ret = -ETIMEDOUT;
- goto probe_error1;
+ goto probe_error2;
}
/*
*/
if (dm_device.state == DM_INIT_ERROR) {
ret = -ETIMEDOUT;
- goto probe_error1;
+ goto probe_error2;
}
dm_device.state = DM_INITIALIZED;
return 0;
-probe_error1:
+probe_error2:
kthread_stop(dm_device.thread);
-probe_error0:
+probe_error1:
vmbus_close(dev->channel);
+probe_error0:
+ kfree(send_buffer);
return ret;
}
vmbus_close(dev->channel);
kthread_stop(dm->thread);
+ kfree(send_buffer);
return 0;
}
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
help
Say yes here to build support for the HID SENSOR
if (ret)
goto error_put_reg;
- st->vref_uv = regulator_get_voltage(st->reg);
+ ret = regulator_get_voltage(st->reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ st->vref_uv = ret;
} else {
/* Use internal reference */
st->vref_uv = 2500000;
*timestamp = pf->timestamp;
}
- iio_push_to_buffers(indio_dev, (u8 *)st->buffer);
+ iio_push_to_buffers(idev, (u8 *)st->buffer);
iio_trigger_notify_done(idev->trig);
return 0;
error_free_irq:
- free_irq(st->client->irq, indio_dev);
+ if (client->irq)
+ free_irq(st->client->irq, indio_dev);
error_uninit_buffer:
iio_buffer_unregister(indio_dev);
error_cleanup_buffer:
max1363_buffer_cleanup(indio_dev);
error_free_available_scan_masks:
kfree(indio_dev->available_scan_masks);
-error_unregister_map:
- iio_map_array_unregister(indio_dev, client->dev.platform_data);
error_disable_reg:
regulator_disable(st->reg);
error_put_reg:
regulator_put(st->reg);
+error_unregister_map:
+ iio_map_array_unregister(indio_dev, client->dev.platform_data);
error_free_device:
iio_device_free(indio_dev);
error_out:
iio_buffer_unregister(indio_dev);
max1363_buffer_cleanup(indio_dev);
kfree(indio_dev->available_scan_masks);
- if (!IS_ERR(st->reg)) {
- regulator_disable(st->reg);
- regulator_put(st->reg);
- }
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
iio_map_array_unregister(indio_dev, client->dev.platform_data);
iio_device_free(indio_dev);
config HID_SENSOR_IIO_COMMON
tristate "Common modules for all HID Sensor IIO drivers"
depends on HID_SENSOR_HUB
- select IIO_TRIGGER if IIO_BUFFER
+ select HID_SENSOR_IIO_TRIGGER if IIO_BUFFER
help
Say yes here to build support for HID sensor to use
HID sensor common processing for attributes and IIO triggers.
HID sensor drivers, this module contains processing for those
attributes.
+config HID_SENSOR_IIO_TRIGGER
+ tristate "Common module (trigger) for all HID Sensor IIO drivers"
+ depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON
+ select IIO_TRIGGER
+ help
+ Say yes here to build trigger support for HID sensors.
+ Triggers will be send if all requested attributes were read.
+
+ If this driver is compiled as a module, it will be named
+ hid-sensor-trigger.
+
config HID_SENSOR_ENUM_BASE_QUIRKS
bool "ENUM base quirks for HID Sensor IIO drivers"
depends on HID_SENSOR_IIO_COMMON
#
obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o
-hid-sensor-iio-common-y := hid-sensor-attributes.o hid-sensor-trigger.o
+obj-$(CONFIG_HID_SENSOR_IIO_TRIGGER) += hid-sensor-trigger.o
+hid-sensor-iio-common-y := hid-sensor-attributes.o
goto error_free_reg;
}
- st->vref = regulator_get_voltage(st->vref_reg);
+ ret = regulator_get_voltage(st->vref_reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ st->vref = ret;
} else {
st->vref = st->chip_info->int_vref;
ctrl |= AD5380_CTRL_INT_VREF_EN;
if (ret)
goto error_put_reg;
- voltage_uv = regulator_get_voltage(reg);
+ ret = regulator_get_voltage(reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ voltage_uv = ret;
}
indio_dev = iio_device_alloc(sizeof(*st));
if (ret)
goto error_put_reg;
- voltage_uv = regulator_get_voltage(reg);
+ ret = regulator_get_voltage(reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ voltage_uv = ret;
}
spi_set_drvdata(spi, indio_dev);
if (ret)
goto error_put_reg;
- voltage_uv = regulator_get_voltage(st->reg);
+ ret = regulator_get_voltage(st->reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ voltage_uv = ret;
}
spi_set_drvdata(spi, indio_dev);
if (ret)
goto error_put_reg;
- voltage_uv = regulator_get_voltage(st->reg);
+ ret = regulator_get_voltage(st->reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ voltage_uv = ret;
}
st->chip_info =
if (ret)
goto error_put_reg_pos;
- pos_voltage_uv = regulator_get_voltage(st->reg_vdd);
+ ret = regulator_get_voltage(st->reg_vdd);
+ if (ret < 0)
+ goto error_disable_reg_pos;
+
+ pos_voltage_uv = ret;
}
st->reg_vss = regulator_get(&spi->dev, "vss");
if (ret)
goto error_put_reg_neg;
- neg_voltage_uv = regulator_get_voltage(st->reg_vss);
+ ret = regulator_get_voltage(st->reg_vss);
+ if (ret < 0)
+ goto error_disable_reg_neg;
+
+ neg_voltage_uv = ret;
}
st->pwr_down = true;
if (!IS_ERR(st->reg_vss))
regulator_put(st->reg_vss);
+error_disable_reg_pos:
if (!IS_ERR(st->reg_vdd))
regulator_disable(st->reg_vdd);
error_put_reg_pos:
} while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt);
} while (r_cnt == 0);
- tmp = freq * (u64)st->r1_mod + (st->fpfd > 1);
+ tmp = freq * (u64)st->r1_mod + (st->fpfd >> 1);
do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */
st->r0_fract = do_div(tmp, st->r1_mod);
st->r0_int = tmp;
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
tristate "HID Gyroscope 3D"
help
Say yes here to build support for the HID SENSOR
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
tristate "HID ALS"
help
Say yes here to build support for the HID SENSOR
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
tristate "HID Magenetometer 3D"
help
Say yes here to build support for the HID SENSOR
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
select IRQ_DOMAIN
+ select REGMAP_I2C
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
/* Serialize access to ssc_list and user count */
static DEFINE_SPINLOCK(user_lock);
struct resource *regs;
struct ssc_device *ssc;
const struct atmel_ssc_platform_data *plat_dat;
+ struct pinctrl *pinctrl;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(&pdev->dev, "Failed to request pinctrl\n");
+ return PTR_ERR(pinctrl);
+ }
ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL);
if (!ssc) {
wait_ret = wait_event_interruptible(dev->iamthif_cl.wait,
(cb = mei_amthif_find_read_list_entry(dev, file)));
+ /* Locking again the Mutex */
+ mutex_lock(&dev->device_lock);
+
if (wait_ret)
return -ERESTARTSYS;
dev_dbg(&dev->pdev->dev, "woke up from sleep\n");
-
- /* Locking again the Mutex */
- mutex_lock(&dev->device_lock);
}
config BFIN_MAC_USE_HWSTAMP
bool "Use IEEE 1588 hwstamp"
+ depends on BFIN_MAC && BF518
select PTP_1588_CLOCK
default y
---help---
new_txdata_index = new_max_eth_txqs + FCOE_TXQ_IDX_OFFSET;
}
- memcpy(&bp->bnx2x_txq[old_txdata_index],
- &bp->bnx2x_txq[new_txdata_index],
+ memcpy(&bp->bnx2x_txq[new_txdata_index],
+ &bp->bnx2x_txq[old_txdata_index],
sizeof(struct bnx2x_fp_txdata));
to_fp->txdata_ptr[0] = &bp->bnx2x_txq[new_txdata_index];
}
+/**
+ * bnx2x_shrink_eth_fp - guarantees fastpath structures stay intact
+ *
+ * @bp: driver handle
+ * @delta: number of eth queues which were not allocated
+ */
+static void bnx2x_shrink_eth_fp(struct bnx2x *bp, int delta)
+{
+ int i, cos, old_eth_num = BNX2X_NUM_ETH_QUEUES(bp);
+
+ /* Queue pointer cannot be re-set on an fp-basis, as moving pointer
+ * backward along the array could cause memory to be overriden
+ */
+ for (cos = 1; cos < bp->max_cos; cos++) {
+ for (i = 0; i < old_eth_num - delta; i++) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+ int new_idx = cos * (old_eth_num - delta) + i;
+
+ memcpy(&bp->bnx2x_txq[new_idx], fp->txdata_ptr[cos],
+ sizeof(struct bnx2x_fp_txdata));
+ fp->txdata_ptr[cos] = &bp->bnx2x_txq[new_idx];
+ }
+ }
+}
+
int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */
/* free skb in the packet ring at pos idx
int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
WARN_ON(delta < 0);
+ bnx2x_shrink_eth_fp(bp, delta);
if (CNIC_SUPPORT(bp))
/* move non eth FPs next to last eth FP
* must be done in that order
} else if ((info->flow_type == UDP_V6_FLOW) &&
(bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) {
bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested;
- return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0);
DP(BNX2X_MSG_ETHTOOL,
"rss re-configured, UDP 4-tupple %s\n",
udp_rss_requested ? "enabled" : "disabled");
+ return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0);
} else {
return 0;
}
struct workqueue_struct *bnx2x_wq;
+struct bnx2x_mac_vals {
+ u32 xmac_addr;
+ u32 xmac_val;
+ u32 emac_addr;
+ u32 emac_val;
+ u32 umac_addr;
+ u32 umac_val;
+ u32 bmac_addr;
+ u32 bmac_val[2];
+};
+
enum bnx2x_board_type {
BCM57710 = 0,
BCM57711,
bnx2x_undi_int_disable_e1h(bp);
}
-static void bnx2x_prev_unload_close_mac(struct bnx2x *bp)
+static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
+ struct bnx2x_mac_vals *vals)
{
u32 val, base_addr, offset, mask, reset_reg;
bool mac_stopped = false;
u8 port = BP_PORT(bp);
+ /* reset addresses as they also mark which values were changed */
+ vals->bmac_addr = 0;
+ vals->umac_addr = 0;
+ vals->xmac_addr = 0;
+ vals->emac_addr = 0;
+
reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2);
if (!CHIP_IS_E3(bp)) {
*/
wb_data[0] = REG_RD(bp, base_addr + offset);
wb_data[1] = REG_RD(bp, base_addr + offset + 0x4);
+ vals->bmac_addr = base_addr + offset;
+ vals->bmac_val[0] = wb_data[0];
+ vals->bmac_val[1] = wb_data[1];
wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
- REG_WR(bp, base_addr + offset, wb_data[0]);
- REG_WR(bp, base_addr + offset + 0x4, wb_data[1]);
+ REG_WR(bp, vals->bmac_addr, wb_data[0]);
+ REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]);
}
BNX2X_DEV_INFO("Disable emac Rx\n");
- REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0);
-
+ vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4;
+ vals->emac_val = REG_RD(bp, vals->emac_addr);
+ REG_WR(bp, vals->emac_addr, 0);
mac_stopped = true;
} else {
if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
val & ~(1 << 1));
REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
val | (1 << 1));
- REG_WR(bp, base_addr + XMAC_REG_CTRL, 0);
+ vals->xmac_addr = base_addr + XMAC_REG_CTRL;
+ vals->xmac_val = REG_RD(bp, vals->xmac_addr);
+ REG_WR(bp, vals->xmac_addr, 0);
mac_stopped = true;
}
mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
if (mask & reset_reg) {
BNX2X_DEV_INFO("Disable umac Rx\n");
base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
- REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0);
+ vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
+ vals->umac_val = REG_RD(bp, vals->umac_addr);
+ REG_WR(bp, vals->umac_addr, 0);
mac_stopped = true;
}
}
{
u32 reset_reg, tmp_reg = 0, rc;
bool prev_undi = false;
+ struct bnx2x_mac_vals mac_vals;
+
/* It is possible a previous function received 'common' answer,
* but hasn't loaded yet, therefore creating a scenario of
* multiple functions receiving 'common' on the same path.
*/
BNX2X_DEV_INFO("Common unload Flow\n");
+ memset(&mac_vals, 0, sizeof(mac_vals));
+
if (bnx2x_prev_is_path_marked(bp))
return bnx2x_prev_mcp_done(bp);
u32 timer_count = 1000;
/* Close the MAC Rx to prevent BRB from filling up */
- bnx2x_prev_unload_close_mac(bp);
+ bnx2x_prev_unload_close_mac(bp, &mac_vals);
+
+ /* close LLH filters towards the BRB */
+ bnx2x_set_rx_filter(&bp->link_params, 0);
/* Check if the UNDI driver was previously loaded
* UNDI driver initializes CID offset for normal bell to 0x7
/* No packets are in the pipeline, path is ready for reset */
bnx2x_reset_common(bp);
+ if (mac_vals.xmac_addr)
+ REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val);
+ if (mac_vals.umac_addr)
+ REG_WR(bp, mac_vals.umac_addr, mac_vals.umac_val);
+ if (mac_vals.emac_addr)
+ REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val);
+ if (mac_vals.bmac_addr) {
+ REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
+ REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
+ }
+
rc = bnx2x_prev_mark_path(bp, prev_undi);
if (rc) {
bnx2x_prev_mcp_done(bp);
u8 idx; /* array index */
u16 tx_budget;
+ u16 spurious_intr;
struct napi_struct napi;
struct be_adapter *adapter;
} ____cacheline_aligned_in_smp;
struct be_adapter *adapter = eqo->adapter;
int num_evts = 0;
- /* On Lancer, clear-intr bit of the EQ DB does not work.
- * INTx is de-asserted only on notifying num evts.
+ /* IRQ is not expected when NAPI is scheduled as the EQ
+ * will not be armed.
+ * But, this can happen on Lancer INTx where it takes
+ * a while to de-assert INTx or in BE2 where occasionaly
+ * an interrupt may be raised even when EQ is unarmed.
+ * If NAPI is already scheduled, then counting & notifying
+ * events will orphan them.
*/
- if (lancer_chip(adapter))
+ if (napi_schedule_prep(&eqo->napi)) {
num_evts = events_get(eqo);
+ __napi_schedule(&eqo->napi);
+ if (num_evts)
+ eqo->spurious_intr = 0;
+ }
+ be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* The EQ-notify may not de-assert INTx rightaway, causing
- * the ISR to be invoked again. So, return HANDLED even when
- * num_evts is zero.
+ /* Return IRQ_HANDLED only for the the first spurious intr
+ * after a valid intr to stop the kernel from branding
+ * this irq as a bad one!
*/
- be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- napi_schedule(&eqo->napi);
- return IRQ_HANDLED;
+ if (num_evts || eqo->spurious_intr++ == 0)
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
}
static irqreturn_t be_msix(int irq, void *dev)
qdev = netdev_priv(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN |
+ NETIF_F_TSO | NETIF_F_TSO_ECN |
NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
ndev->features = ndev->hw_features |
NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
config XILINX_AXI_EMAC
tristate "Xilinx 10/100/1000 AXI Ethernet support"
- depends on (PPC32 || MICROBLAZE)
+ depends on MICROBLAZE
select PHYLIB
---help---
This driver supports the 10/100/1000 Ethernet from Xilinx for the
lp->rx_irq = irq_of_parse_and_map(np, 1);
lp->tx_irq = irq_of_parse_and_map(np, 0);
of_node_put(np);
- if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
+ if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
dev_err(&op->dev, "could not determine irqs\n");
ret = -ENOMEM;
goto err_iounmap_2;
struct tun_struct *tun;
struct net_device *dev;
- tun = rcu_dereference_protected(tfile->tun,
- lockdep_rtnl_is_held());
+ tun = rtnl_dereference(tfile->tun);
+
if (tun) {
u16 index = tfile->queue_index;
BUG_ON(index >= tun->numqueues);
rcu_assign_pointer(tun->tfiles[index],
tun->tfiles[tun->numqueues - 1]);
rcu_assign_pointer(tfile->tun, NULL);
- ntfile = rcu_dereference_protected(tun->tfiles[index],
- lockdep_rtnl_is_held());
+ ntfile = rtnl_dereference(tun->tfiles[index]);
ntfile->queue_index = index;
--tun->numqueues;
/* Drop read queue */
skb_queue_purge(&tfile->sk.sk_receive_queue);
tun_set_real_num_queues(tun);
- } else if (tfile->detached && clean)
+ } else if (tfile->detached && clean) {
tun = tun_enable_queue(tfile);
+ sock_put(&tfile->sk);
+ }
if (clean) {
if (tun && tun->numqueues == 0 && tun->numdisabled == 0 &&
int i, n = tun->numqueues;
for (i = 0; i < n; i++) {
- tfile = rcu_dereference_protected(tun->tfiles[i],
- lockdep_rtnl_is_held());
+ tfile = rtnl_dereference(tun->tfiles[i]);
BUG_ON(!tfile);
wake_up_all(&tfile->wq.wait);
rcu_assign_pointer(tfile->tun, NULL);
synchronize_net();
for (i = 0; i < n; i++) {
- tfile = rcu_dereference_protected(tun->tfiles[i],
- lockdep_rtnl_is_held());
+ tfile = rtnl_dereference(tun->tfiles[i]);
/* Drop read queue */
skb_queue_purge(&tfile->sk.sk_receive_queue);
sock_put(&tfile->sk);
sock_put(&tfile->sk);
}
BUG_ON(tun->numdisabled != 0);
+
+ if (tun->flags & TUN_PERSIST)
+ module_put(THIS_MODULE);
}
static int tun_attach(struct tun_struct *tun, struct file *file)
int err;
err = -EINVAL;
- if (rcu_dereference_protected(tfile->tun, lockdep_rtnl_is_held()))
+ if (rtnl_dereference(tfile->tun))
goto out;
err = -EBUSY;
struct net_device *dev;
int err;
+ if (tfile->detached)
+ return -EINVAL;
+
dev = __dev_get_by_name(net, ifr->ifr_name);
if (dev) {
if (ifr->ifr_flags & IFF_TUN_EXCL)
struct tun_file *tfile;
for (i = 0; i < n; i++) {
- tfile = rcu_dereference_protected(tun->tfiles[i],
- lockdep_rtnl_is_held());
+ tfile = rtnl_dereference(tun->tfiles[i]);
sk_detach_filter(tfile->socket.sk);
}
struct tun_file *tfile;
for (i = 0; i < tun->numqueues; i++) {
- tfile = rcu_dereference_protected(tun->tfiles[i],
- lockdep_rtnl_is_held());
+ tfile = rtnl_dereference(tun->tfiles[i]);
ret = sk_attach_filter(&tun->fprog, tfile->socket.sk);
if (ret) {
tun_detach_filter(tun, i);
int i;
for (i = 0; i < tun->numqueues; i++) {
- tfile = rcu_dereference_protected(tun->tfiles[i],
- lockdep_rtnl_is_held());
+ tfile = rtnl_dereference(tun->tfiles[i]);
tfile->socket.sk->sk_sndbuf = tun->sndbuf;
}
}
tun = tfile->detached;
if (!tun)
ret = -EINVAL;
- else if (tun_not_capable(tun))
- ret = -EPERM;
else
ret = tun_attach(tun, file);
} else if (ifr->ifr_flags & IFF_DETACH_QUEUE) {
- tun = rcu_dereference_protected(tfile->tun,
- lockdep_rtnl_is_held());
+ tun = rtnl_dereference(tfile->tun);
if (!tun || !(tun->flags & TUN_TAP_MQ))
ret = -EINVAL;
else
/* Disable/Enable persist mode. Keep an extra reference to the
* module to prevent the module being unprobed.
*/
- if (arg) {
+ if (arg && !(tun->flags & TUN_PERSIST)) {
tun->flags |= TUN_PERSIST;
__module_get(THIS_MODULE);
- } else {
+ }
+ if (!arg && (tun->flags & TUN_PERSIST)) {
tun->flags &= ~TUN_PERSIST;
module_put(THIS_MODULE);
}
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
source "drivers/net/wireless/ath/ar5523/Kconfig"
+source "drivers/net/wireless/ath/wil6210/Kconfig"
endif
obj-$(CONFIG_CARL9170) += carl9170/
obj-$(CONFIG_ATH6KL) += ath6kl/
obj-$(CONFIG_AR5523) += ar5523/
+obj-$(CONFIG_WIL6210) += wil6210/
obj-$(CONFIG_ATH_COMMON) += ath.o
--- /dev/null
+config WIL6210
+ tristate "Wilocity 60g WiFi card wil6210 support"
+ depends on CFG80211
+ depends on PCI
+ default n
+ ---help---
+ This module adds support for wireless adapter based on
+ wil6210 chip by Wilocity. It supports operation on the
+ 60 GHz band, covered by the IEEE802.11ad standard.
+
+ http://wireless.kernel.org/en/users/Drivers/wil6210
+
+ If you choose to build it as a module, it will be called
+ wil6210
+
+config WIL6210_ISR_COR
+ bool "Use Clear-On-Read mode for ISR registers for wil6210"
+ depends on WIL6210
+ default y
+ ---help---
+ ISR registers on wil6210 chip may operate in either
+ COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode.
+ For production code, use COR (say y); is default since
+ it saves extra target transaction;
+ For ISR debug, use W1C (say n); is allows to monitor ISR
+ registers with debugfs. If COR were used, ISR would
+ self-clear when accessed for debug purposes, it makes
+ such monitoring impossible.
+ Say y unless you debug interrupts
--- /dev/null
+obj-$(CONFIG_WIL6210) += wil6210.o
+
+wil6210-objs := main.o
+wil6210-objs += netdev.o
+wil6210-objs += cfg80211.o
+wil6210-objs += pcie_bus.o
+wil6210-objs += debugfs.o
+wil6210-objs += wmi.o
+wil6210-objs += interrupt.o
+wil6210-objs += txrx.o
+
+subdir-ccflags-y += -Werror
+subdir-ccflags-y += -D__CHECK_ENDIAN__
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <net/cfg80211.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+
+#define CHAN60G(_channel, _flags) { \
+ .band = IEEE80211_BAND_60GHZ, \
+ .center_freq = 56160 + (2160 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 40, \
+}
+
+static struct ieee80211_channel wil_60ghz_channels[] = {
+ CHAN60G(1, 0),
+ CHAN60G(2, 0),
+ CHAN60G(3, 0),
+/* channel 4 not supported yet */
+};
+
+static struct ieee80211_supported_band wil_band_60ghz = {
+ .channels = wil_60ghz_channels,
+ .n_channels = ARRAY_SIZE(wil_60ghz_channels),
+ .ht_cap = {
+ .ht_supported = true,
+ .cap = 0, /* TODO */
+ .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, /* TODO */
+ .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, /* TODO */
+ .mcs = {
+ /* MCS 1..12 - SC PHY */
+ .rx_mask = {0xfe, 0x1f}, /* 1..12 */
+ .tx_params = IEEE80211_HT_MCS_TX_DEFINED, /* TODO */
+ },
+ },
+};
+
+static const struct ieee80211_txrx_stypes
+wil_mgmt_stypes[NUM_NL80211_IFTYPES] = {
+ [NL80211_IFTYPE_STATION] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_AP] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_P2P_CLIENT] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_P2P_GO] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+};
+
+static const u32 wil_cipher_suites[] = {
+ WLAN_CIPHER_SUITE_GCMP,
+};
+
+int wil_iftype_nl2wmi(enum nl80211_iftype type)
+{
+ static const struct {
+ enum nl80211_iftype nl;
+ enum wmi_network_type wmi;
+ } __nl2wmi[] = {
+ {NL80211_IFTYPE_ADHOC, WMI_NETTYPE_ADHOC},
+ {NL80211_IFTYPE_STATION, WMI_NETTYPE_INFRA},
+ {NL80211_IFTYPE_AP, WMI_NETTYPE_AP},
+ {NL80211_IFTYPE_P2P_CLIENT, WMI_NETTYPE_P2P},
+ {NL80211_IFTYPE_P2P_GO, WMI_NETTYPE_P2P},
+ {NL80211_IFTYPE_MONITOR, WMI_NETTYPE_ADHOC}, /* FIXME */
+ };
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(__nl2wmi); i++) {
+ if (__nl2wmi[i].nl == type)
+ return __nl2wmi[i].wmi;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int wil_cfg80211_get_station(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 *mac, struct station_info *sinfo)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ int rc;
+ struct wmi_notify_req_cmd cmd = {
+ .cid = 0,
+ .interval_usec = 0,
+ };
+
+ if (memcmp(mac, wil->dst_addr[0], ETH_ALEN))
+ return -ENOENT;
+
+ /* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
+ rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
+ WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
+ if (rc)
+ return rc;
+
+ sinfo->generation = wil->sinfo_gen;
+
+ sinfo->filled |= STATION_INFO_TX_BITRATE;
+ sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
+ sinfo->txrate.mcs = wil->stats.bf_mcs;
+ sinfo->filled |= STATION_INFO_RX_BITRATE;
+ sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
+ sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
+
+ if (test_bit(wil_status_fwconnected, &wil->status)) {
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = 12; /* TODO: provide real value */
+ }
+
+ return 0;
+}
+
+static int wil_cfg80211_change_iface(struct wiphy *wiphy,
+ struct net_device *ndev,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+
+ switch (type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_P2P_GO:
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ if (flags)
+ wil->monitor_flags = *flags;
+ else
+ wil->monitor_flags = 0;
+
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ wdev->iftype = type;
+
+ return 0;
+}
+
+static int wil_cfg80211_scan(struct wiphy *wiphy,
+ struct cfg80211_scan_request *request)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+ struct {
+ struct wmi_start_scan_cmd cmd;
+ u16 chnl[4];
+ } __packed cmd;
+ uint i, n;
+
+ if (wil->scan_request) {
+ wil_err(wil, "Already scanning\n");
+ return -EAGAIN;
+ }
+
+ /* check we are client side */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ break;
+ default:
+ return -EOPNOTSUPP;
+
+ }
+
+ /* FW don't support scan after connection attempt */
+ if (test_bit(wil_status_dontscan, &wil->status)) {
+ wil_err(wil, "Scan after connect attempt not supported\n");
+ return -EBUSY;
+ }
+
+ wil->scan_request = request;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd.num_channels = 0;
+ n = min(request->n_channels, 4U);
+ for (i = 0; i < n; i++) {
+ int ch = request->channels[i]->hw_value;
+ if (ch == 0) {
+ wil_err(wil,
+ "Scan requested for unknown frequency %dMhz\n",
+ request->channels[i]->center_freq);
+ continue;
+ }
+ /* 0-based channel indexes */
+ cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1;
+ wil_dbg(wil, "Scan for ch %d : %d MHz\n", ch,
+ request->channels[i]->center_freq);
+ }
+
+ return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
+ cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
+}
+
+static int wil_cfg80211_connect(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_connect_params *sme)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct cfg80211_bss *bss;
+ struct wmi_connect_cmd conn;
+ const u8 *ssid_eid;
+ const u8 *rsn_eid;
+ int ch;
+ int rc = 0;
+
+ bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
+ sme->ssid, sme->ssid_len,
+ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+ if (!bss) {
+ wil_err(wil, "Unable to find BSS\n");
+ return -ENOENT;
+ }
+
+ ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
+ if (!ssid_eid) {
+ wil_err(wil, "No SSID\n");
+ rc = -ENOENT;
+ goto out;
+ }
+
+ rsn_eid = sme->ie ?
+ cfg80211_find_ie(WLAN_EID_RSN, sme->ie, sme->ie_len) :
+ NULL;
+ if (rsn_eid) {
+ if (sme->ie_len > WMI_MAX_IE_LEN) {
+ rc = -ERANGE;
+ wil_err(wil, "IE too large (%td bytes)\n",
+ sme->ie_len);
+ goto out;
+ }
+ /*
+ * For secure assoc, send:
+ * (1) WMI_DELETE_CIPHER_KEY_CMD
+ * (2) WMI_SET_APPIE_CMD
+ */
+ rc = wmi_del_cipher_key(wil, 0, bss->bssid);
+ if (rc) {
+ wil_err(wil, "WMI_DELETE_CIPHER_KEY_CMD failed\n");
+ goto out;
+ }
+ /* WMI_SET_APPIE_CMD */
+ rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie);
+ if (rc) {
+ wil_err(wil, "WMI_SET_APPIE_CMD failed\n");
+ goto out;
+ }
+ }
+
+ /* WMI_CONNECT_CMD */
+ memset(&conn, 0, sizeof(conn));
+ switch (bss->capability & 0x03) {
+ case WLAN_CAPABILITY_DMG_TYPE_AP:
+ conn.network_type = WMI_NETTYPE_INFRA;
+ break;
+ case WLAN_CAPABILITY_DMG_TYPE_PBSS:
+ conn.network_type = WMI_NETTYPE_P2P;
+ break;
+ default:
+ wil_err(wil, "Unsupported BSS type, capability= 0x%04x\n",
+ bss->capability);
+ goto out;
+ }
+ if (rsn_eid) {
+ conn.dot11_auth_mode = WMI_AUTH11_SHARED;
+ conn.auth_mode = WMI_AUTH_WPA2_PSK;
+ conn.pairwise_crypto_type = WMI_CRYPT_AES_GCMP;
+ conn.pairwise_crypto_len = 16;
+ } else {
+ conn.dot11_auth_mode = WMI_AUTH11_OPEN;
+ conn.auth_mode = WMI_AUTH_NONE;
+ }
+
+ conn.ssid_len = min_t(u8, ssid_eid[1], 32);
+ memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
+
+ ch = bss->channel->hw_value;
+ if (ch == 0) {
+ wil_err(wil, "BSS at unknown frequency %dMhz\n",
+ bss->channel->center_freq);
+ rc = -EOPNOTSUPP;
+ goto out;
+ }
+ conn.channel = ch - 1;
+
+ memcpy(conn.bssid, bss->bssid, 6);
+ memcpy(conn.dst_mac, bss->bssid, 6);
+ /*
+ * FW don't support scan after connection attempt
+ */
+ set_bit(wil_status_dontscan, &wil->status);
+
+ rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
+ if (rc == 0) {
+ /* Connect can take lots of time */
+ mod_timer(&wil->connect_timer,
+ jiffies + msecs_to_jiffies(2000));
+ }
+
+ out:
+ cfg80211_put_bss(bss);
+
+ return rc;
+}
+
+static int wil_cfg80211_disconnect(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u16 reason_code)
+{
+ int rc;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
+
+ return rc;
+}
+
+static int wil_cfg80211_set_channel(struct wiphy *wiphy,
+ struct cfg80211_chan_def *chandef)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wdev->preset_chandef = *chandef;
+
+ return 0;
+}
+
+static int wil_cfg80211_add_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool pairwise,
+ const u8 *mac_addr,
+ struct key_params *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ /* group key is not used */
+ if (!pairwise)
+ return 0;
+
+ return wmi_add_cipher_key(wil, key_index, mac_addr,
+ params->key_len, params->key);
+}
+
+static int wil_cfg80211_del_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool pairwise,
+ const u8 *mac_addr)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ /* group key is not used */
+ if (!pairwise)
+ return 0;
+
+ return wmi_del_cipher_key(wil, key_index, mac_addr);
+}
+
+/* Need to be present or wiphy_new() will WARN */
+static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool unicast,
+ bool multicast)
+{
+ return 0;
+}
+
+static int wil_cfg80211_start_ap(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_ap_settings *info)
+{
+ int rc = 0;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ struct ieee80211_channel *channel = info->chandef.chan;
+ struct cfg80211_beacon_data *bcon = &info->beacon;
+ u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ if (!channel) {
+ wil_err(wil, "AP: No channel???\n");
+ return -EINVAL;
+ }
+
+ wil_dbg(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
+ channel->center_freq, info->privacy ? "secure" : "open");
+ print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
+ info->ssid, info->ssid_len);
+
+ rc = wil_reset(wil);
+ if (rc)
+ return rc;
+
+ rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
+ if (rc)
+ return rc;
+
+ rc = wmi_set_channel(wil, channel->hw_value);
+ if (rc)
+ return rc;
+
+ /* MAC address - pre-requisite for other commands */
+ wmi_set_mac_address(wil, ndev->dev_addr);
+
+ /* IE's */
+ /* bcon 'head IE's are not relevant for 60g band */
+ wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
+ bcon->beacon_ies);
+ wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
+ bcon->proberesp_ies);
+ wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
+ bcon->assocresp_ies);
+
+ wil->secure_pcp = info->privacy;
+
+ rc = wmi_set_bcon(wil, info->beacon_interval, wmi_nettype);
+ if (rc)
+ return rc;
+
+ /* Rx VRING. After MAC and beacon */
+ rc = wil_rx_init(wil);
+
+ netif_carrier_on(ndev);
+
+ return rc;
+}
+
+static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
+ struct net_device *ndev)
+{
+ int rc = 0;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ /* To stop beaconing, set BI to 0 */
+ rc = wmi_set_bcon(wil, 0, wmi_nettype);
+
+ return rc;
+}
+
+static struct cfg80211_ops wil_cfg80211_ops = {
+ .scan = wil_cfg80211_scan,
+ .connect = wil_cfg80211_connect,
+ .disconnect = wil_cfg80211_disconnect,
+ .change_virtual_intf = wil_cfg80211_change_iface,
+ .get_station = wil_cfg80211_get_station,
+ .set_monitor_channel = wil_cfg80211_set_channel,
+ .add_key = wil_cfg80211_add_key,
+ .del_key = wil_cfg80211_del_key,
+ .set_default_key = wil_cfg80211_set_default_key,
+ /* AP mode */
+ .start_ap = wil_cfg80211_start_ap,
+ .stop_ap = wil_cfg80211_stop_ap,
+};
+
+static void wil_wiphy_init(struct wiphy *wiphy)
+{
+ /* TODO: set real value */
+ wiphy->max_scan_ssids = 10;
+ wiphy->max_num_pmkids = 0 /* TODO: */;
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MONITOR);
+ /* TODO: enable P2P when integrated with supplicant:
+ * BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO)
+ */
+ wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
+ WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+ dev_warn(wiphy_dev(wiphy), "%s : flags = 0x%08x\n",
+ __func__, wiphy->flags);
+ wiphy->probe_resp_offload =
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+
+ wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz;
+
+ /* TODO: figure this out */
+ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+ wiphy->cipher_suites = wil_cipher_suites;
+ wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
+ wiphy->mgmt_stypes = wil_mgmt_stypes;
+}
+
+struct wireless_dev *wil_cfg80211_init(struct device *dev)
+{
+ int rc = 0;
+ struct wireless_dev *wdev;
+
+ wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+ if (!wdev)
+ return ERR_PTR(-ENOMEM);
+
+ wdev->wiphy = wiphy_new(&wil_cfg80211_ops,
+ sizeof(struct wil6210_priv));
+ if (!wdev->wiphy) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ set_wiphy_dev(wdev->wiphy, dev);
+ wil_wiphy_init(wdev->wiphy);
+
+ rc = wiphy_register(wdev->wiphy);
+ if (rc < 0)
+ goto out_failed_reg;
+
+ return wdev;
+
+out_failed_reg:
+ wiphy_free(wdev->wiphy);
+out:
+ kfree(wdev);
+
+ return ERR_PTR(rc);
+}
+
+void wil_wdev_free(struct wil6210_priv *wil)
+{
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+
+ if (!wdev)
+ return;
+
+ wiphy_unregister(wdev->wiphy);
+ wiphy_free(wdev->wiphy);
+ kfree(wdev);
+}
--- /dev/null
+#ifndef WIL_DBG_HEXDUMP_H_
+#define WIL_DBG_HEXDUMP_H_
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+do { \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, \
+ __builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
+ print_hex_dump(KERN_DEBUG, prefix_str, \
+ prefix_type, rowsize, groupsize, \
+ buf, len, ascii); \
+} while (0)
+
+#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
+ wil_dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
+#else /* defined(CONFIG_DYNAMIC_DEBUG) */
+#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
+
+#endif /* WIL_DBG_HEXDUMP_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pci.h>
+#include <linux/rtnetlink.h>
+
+#include "wil6210.h"
+#include "txrx.h"
+
+/* Nasty hack. Better have per device instances */
+static u32 mem_addr;
+static u32 dbg_txdesc_index;
+
+static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
+ const char *name, struct vring *vring)
+{
+ void __iomem *x = wmi_addr(wil, vring->hwtail);
+
+ seq_printf(s, "VRING %s = {\n", name);
+ seq_printf(s, " pa = 0x%016llx\n", (unsigned long long)vring->pa);
+ seq_printf(s, " va = 0x%p\n", vring->va);
+ seq_printf(s, " size = %d\n", vring->size);
+ seq_printf(s, " swtail = %d\n", vring->swtail);
+ seq_printf(s, " swhead = %d\n", vring->swhead);
+ seq_printf(s, " hwtail = [0x%08x] -> ", vring->hwtail);
+ if (x)
+ seq_printf(s, "0x%08x\n", ioread32(x));
+ else
+ seq_printf(s, "???\n");
+
+ if (vring->va && (vring->size < 1025)) {
+ uint i;
+ for (i = 0; i < vring->size; i++) {
+ volatile struct vring_tx_desc *d = &vring->va[i].tx;
+ if ((i % 64) == 0 && (i != 0))
+ seq_printf(s, "\n");
+ seq_printf(s, "%s", (d->dma.status & BIT(0)) ?
+ "S" : (vring->ctx[i] ? "H" : "h"));
+ }
+ seq_printf(s, "\n");
+ }
+ seq_printf(s, "}\n");
+}
+
+static int wil_vring_debugfs_show(struct seq_file *s, void *data)
+{
+ uint i;
+ struct wil6210_priv *wil = s->private;
+
+ wil_print_vring(s, wil, "rx", &wil->vring_rx);
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+ struct vring *vring = &(wil->vring_tx[i]);
+ if (vring->va) {
+ char name[10];
+ snprintf(name, sizeof(name), "tx_%2d", i);
+ wil_print_vring(s, wil, name, vring);
+ }
+ }
+
+ return 0;
+}
+
+static int wil_vring_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_vring_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_vring = {
+ .open = wil_vring_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static void wil_print_ring(struct seq_file *s, const char *prefix,
+ void __iomem *off)
+{
+ struct wil6210_priv *wil = s->private;
+ struct wil6210_mbox_ring r;
+ int rsize;
+ uint i;
+
+ wil_memcpy_fromio_32(&r, off, sizeof(r));
+ wil_mbox_ring_le2cpus(&r);
+ /*
+ * we just read memory block from NIC. This memory may be
+ * garbage. Check validity before using it.
+ */
+ rsize = r.size / sizeof(struct wil6210_mbox_ring_desc);
+
+ seq_printf(s, "ring %s = {\n", prefix);
+ seq_printf(s, " base = 0x%08x\n", r.base);
+ seq_printf(s, " size = 0x%04x bytes -> %d entries\n", r.size, rsize);
+ seq_printf(s, " tail = 0x%08x\n", r.tail);
+ seq_printf(s, " head = 0x%08x\n", r.head);
+ seq_printf(s, " entry size = %d\n", r.entry_size);
+
+ if (r.size % sizeof(struct wil6210_mbox_ring_desc)) {
+ seq_printf(s, " ??? size is not multiple of %zd, garbage?\n",
+ sizeof(struct wil6210_mbox_ring_desc));
+ goto out;
+ }
+
+ if (!wmi_addr(wil, r.base) ||
+ !wmi_addr(wil, r.tail) ||
+ !wmi_addr(wil, r.head)) {
+ seq_printf(s, " ??? pointers are garbage?\n");
+ goto out;
+ }
+
+ for (i = 0; i < rsize; i++) {
+ struct wil6210_mbox_ring_desc d;
+ struct wil6210_mbox_hdr hdr;
+ size_t delta = i * sizeof(d);
+ void __iomem *x = wil->csr + HOSTADDR(r.base) + delta;
+
+ wil_memcpy_fromio_32(&d, x, sizeof(d));
+
+ seq_printf(s, " [%2x] %s %s%s 0x%08x", i,
+ d.sync ? "F" : "E",
+ (r.tail - r.base == delta) ? "t" : " ",
+ (r.head - r.base == delta) ? "h" : " ",
+ le32_to_cpu(d.addr));
+ if (0 == wmi_read_hdr(wil, d.addr, &hdr)) {
+ u16 len = le16_to_cpu(hdr.len);
+ seq_printf(s, " -> %04x %04x %04x %02x\n",
+ le16_to_cpu(hdr.seq), len,
+ le16_to_cpu(hdr.type), hdr.flags);
+ if (len <= MAX_MBOXITEM_SIZE) {
+ int n = 0;
+ unsigned char printbuf[16 * 3 + 2];
+ unsigned char databuf[MAX_MBOXITEM_SIZE];
+ void __iomem *src = wmi_buffer(wil, d.addr) +
+ sizeof(struct wil6210_mbox_hdr);
+ /*
+ * No need to check @src for validity -
+ * we already validated @d.addr while
+ * reading header
+ */
+ wil_memcpy_fromio_32(databuf, src, len);
+ while (n < len) {
+ int l = min(len - n, 16);
+ hex_dump_to_buffer(databuf + n, l,
+ 16, 1, printbuf,
+ sizeof(printbuf),
+ false);
+ seq_printf(s, " : %s\n", printbuf);
+ n += l;
+ }
+ }
+ } else {
+ seq_printf(s, "\n");
+ }
+ }
+ out:
+ seq_printf(s, "}\n");
+}
+
+static int wil_mbox_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+
+ wil_print_ring(s, "tx", wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx));
+ wil_print_ring(s, "rx", wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx));
+
+ return 0;
+}
+
+static int wil_mbox_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_mbox_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_mbox = {
+ .open = wil_mbox_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static int wil_debugfs_iomem_x32_set(void *data, u64 val)
+{
+ iowrite32(val, (void __iomem *)data);
+ wmb(); /* make sure write propagated to HW */
+
+ return 0;
+}
+
+static int wil_debugfs_iomem_x32_get(void *data, u64 *val)
+{
+ *val = ioread32((void __iomem *)data);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_iomem_x32, wil_debugfs_iomem_x32_get,
+ wil_debugfs_iomem_x32_set, "0x%08llx\n");
+
+static struct dentry *wil_debugfs_create_iomem_x32(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ void __iomem *value)
+{
+ return debugfs_create_file(name, mode, parent, (void * __force)value,
+ &fops_iomem_x32);
+}
+
+static int wil6210_debugfs_create_ISR(struct wil6210_priv *wil,
+ const char *name,
+ struct dentry *parent, u32 off)
+{
+ struct dentry *d = debugfs_create_dir(name, parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("ICC", S_IRUGO | S_IWUSR, d,
+ wil->csr + off);
+ wil_debugfs_create_iomem_x32("ICR", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 4);
+ wil_debugfs_create_iomem_x32("ICM", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 8);
+ wil_debugfs_create_iomem_x32("ICS", S_IWUSR, d,
+ wil->csr + off + 12);
+ wil_debugfs_create_iomem_x32("IMV", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 16);
+ wil_debugfs_create_iomem_x32("IMS", S_IWUSR, d,
+ wil->csr + off + 20);
+ wil_debugfs_create_iomem_x32("IMC", S_IWUSR, d,
+ wil->csr + off + 24);
+
+ return 0;
+}
+
+static int wil6210_debugfs_create_pseudo_ISR(struct wil6210_priv *wil,
+ struct dentry *parent)
+{
+ struct dentry *d = debugfs_create_dir("PSEUDO_ISR", parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("CAUSE", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE));
+ wil_debugfs_create_iomem_x32("MASK_SW", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+ wil_debugfs_create_iomem_x32("MASK_FW", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_FW));
+
+ return 0;
+}
+
+static int wil6210_debugfs_create_ITR_CNT(struct wil6210_priv *wil,
+ struct dentry *parent)
+{
+ struct dentry *d = debugfs_create_dir("ITR_CNT", parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("TRSH", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_TRSH));
+ wil_debugfs_create_iomem_x32("DATA", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_DATA));
+ wil_debugfs_create_iomem_x32("CTL", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_CRL));
+
+ return 0;
+}
+
+static int wil_memread_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ void __iomem *a = wmi_buffer(wil, cpu_to_le32(mem_addr));
+
+ if (a)
+ seq_printf(s, "[0x%08x] = 0x%08x\n", mem_addr, ioread32(a));
+ else
+ seq_printf(s, "[0x%08x] = INVALID\n", mem_addr);
+
+ return 0;
+}
+
+static int wil_memread_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_memread_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_memread = {
+ .open = wil_memread_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static int wil_default_open(struct inode *inode, struct file *file)
+{
+ if (inode->i_private)
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ enum { max_count = 4096 };
+ struct debugfs_blob_wrapper *blob = file->private_data;
+ loff_t pos = *ppos;
+ size_t available = blob->size;
+ void *buf;
+ size_t ret;
+
+ if (pos < 0)
+ return -EINVAL;
+
+ if (pos >= available || !count)
+ return 0;
+
+ if (count > available - pos)
+ count = available - pos;
+ if (count > max_count)
+ count = max_count;
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ wil_memcpy_fromio_32(buf, (const volatile void __iomem *)blob->data +
+ pos, count);
+
+ ret = copy_to_user(user_buf, buf, count);
+ kfree(buf);
+ if (ret == count)
+ return -EFAULT;
+
+ count -= ret;
+ *ppos = pos + count;
+
+ return count;
+}
+
+static const struct file_operations fops_ioblob = {
+ .read = wil_read_file_ioblob,
+ .open = wil_default_open,
+ .llseek = default_llseek,
+};
+
+static
+struct dentry *wil_debugfs_create_ioblob(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ struct debugfs_blob_wrapper *blob)
+{
+ return debugfs_create_file(name, mode, parent, blob, &fops_ioblob);
+}
+/*---reset---*/
+static ssize_t wil_write_file_reset(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ /**
+ * BUG:
+ * this code does NOT sync device state with the rest of system
+ * use with care, debug only!!!
+ */
+ rtnl_lock();
+ dev_close(ndev);
+ ndev->flags &= ~IFF_UP;
+ rtnl_unlock();
+ wil_reset(wil);
+
+ return len;
+}
+
+static const struct file_operations fops_reset = {
+ .write = wil_write_file_reset,
+ .open = wil_default_open,
+};
+/*---------Tx descriptor------------*/
+
+static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ struct vring *vring = &(wil->vring_tx[0]);
+
+ if (!vring->va) {
+ seq_printf(s, "No Tx VRING\n");
+ return 0;
+ }
+
+ if (dbg_txdesc_index < vring->size) {
+ volatile struct vring_tx_desc *d =
+ &(vring->va[dbg_txdesc_index].tx);
+ volatile u32 *u = (volatile u32 *)d;
+ struct sk_buff *skb = vring->ctx[dbg_txdesc_index];
+
+ seq_printf(s, "Tx[%3d] = {\n", dbg_txdesc_index);
+ seq_printf(s, " MAC = 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ u[0], u[1], u[2], u[3]);
+ seq_printf(s, " DMA = 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ u[4], u[5], u[6], u[7]);
+ seq_printf(s, " SKB = %p\n", skb);
+
+ if (skb) {
+ unsigned char printbuf[16 * 3 + 2];
+ int i = 0;
+ int len = skb_headlen(skb);
+ void *p = skb->data;
+
+ seq_printf(s, " len = %d\n", len);
+
+ while (i < len) {
+ int l = min(len - i, 16);
+ hex_dump_to_buffer(p + i, l, 16, 1, printbuf,
+ sizeof(printbuf), false);
+ seq_printf(s, " : %s\n", printbuf);
+ i += l;
+ }
+ }
+ seq_printf(s, "}\n");
+ } else {
+ seq_printf(s, "TxDesc index (%d) >= size (%d)\n",
+ dbg_txdesc_index, vring->size);
+ }
+
+ return 0;
+}
+
+static int wil_txdesc_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_txdesc_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_txdesc = {
+ .open = wil_txdesc_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+/*---------beamforming------------*/
+static int wil_bf_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ seq_printf(s,
+ "TSF : 0x%016llx\n"
+ "TxMCS : %d\n"
+ "Sectors(rx:tx) my %2d:%2d peer %2d:%2d\n",
+ wil->stats.tsf, wil->stats.bf_mcs,
+ wil->stats.my_rx_sector, wil->stats.my_tx_sector,
+ wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
+ return 0;
+}
+
+static int wil_bf_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_bf_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_bf = {
+ .open = wil_bf_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+/*---------SSID------------*/
+static ssize_t wil_read_file_ssid(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+
+ return simple_read_from_buffer(user_buf, count, ppos,
+ wdev->ssid, wdev->ssid_len);
+}
+
+static ssize_t wil_write_file_ssid(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ if (*ppos != 0) {
+ wil_err(wil, "Unable to set SSID substring from [%d]\n",
+ (int)*ppos);
+ return -EINVAL;
+ }
+
+ if (count > sizeof(wdev->ssid)) {
+ wil_err(wil, "SSID too long, len = %d\n", (int)count);
+ return -EINVAL;
+ }
+ if (netif_running(ndev)) {
+ wil_err(wil, "Unable to change SSID on running interface\n");
+ return -EINVAL;
+ }
+
+ wdev->ssid_len = count;
+ return simple_write_to_buffer(wdev->ssid, wdev->ssid_len, ppos,
+ buf, count);
+}
+
+static const struct file_operations fops_ssid = {
+ .read = wil_read_file_ssid,
+ .write = wil_write_file_ssid,
+ .open = wil_default_open,
+};
+
+/*----------------*/
+int wil6210_debugfs_init(struct wil6210_priv *wil)
+{
+ struct dentry *dbg = wil->debug = debugfs_create_dir(WIL_NAME,
+ wil_to_wiphy(wil)->debugfsdir);
+
+ if (IS_ERR_OR_NULL(dbg))
+ return -ENODEV;
+
+ debugfs_create_file("mbox", S_IRUGO, dbg, wil, &fops_mbox);
+ debugfs_create_file("vrings", S_IRUGO, dbg, wil, &fops_vring);
+ debugfs_create_file("txdesc", S_IRUGO, dbg, wil, &fops_txdesc);
+ debugfs_create_u32("txdesc_index", S_IRUGO | S_IWUSR, dbg,
+ &dbg_txdesc_index);
+ debugfs_create_file("bf", S_IRUGO, dbg, wil, &fops_bf);
+ debugfs_create_file("ssid", S_IRUGO | S_IWUSR, dbg, wil, &fops_ssid);
+ debugfs_create_u32("secure_pcp", S_IRUGO | S_IWUSR, dbg,
+ &wil->secure_pcp);
+
+ wil6210_debugfs_create_ISR(wil, "USER_ICR", dbg,
+ HOSTADDR(RGF_USER_USER_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_TX_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_TX_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_RX_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_RX_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_MISC_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_MISC_ICR));
+ wil6210_debugfs_create_pseudo_ISR(wil, dbg);
+ wil6210_debugfs_create_ITR_CNT(wil, dbg);
+
+ debugfs_create_u32("mem_addr", S_IRUGO | S_IWUSR, dbg, &mem_addr);
+ debugfs_create_file("mem_val", S_IRUGO, dbg, wil, &fops_memread);
+
+ debugfs_create_file("reset", S_IWUSR, dbg, wil, &fops_reset);
+
+ wil->rgf_blob.data = (void * __force)wil->csr + 0;
+ wil->rgf_blob.size = 0xa000;
+ wil_debugfs_create_ioblob("blob_rgf", S_IRUGO, dbg, &wil->rgf_blob);
+
+ wil->fw_code_blob.data = (void * __force)wil->csr + 0x40000;
+ wil->fw_code_blob.size = 0x40000;
+ wil_debugfs_create_ioblob("blob_fw_code", S_IRUGO, dbg,
+ &wil->fw_code_blob);
+
+ wil->fw_data_blob.data = (void * __force)wil->csr + 0x80000;
+ wil->fw_data_blob.size = 0x8000;
+ wil_debugfs_create_ioblob("blob_fw_data", S_IRUGO, dbg,
+ &wil->fw_data_blob);
+
+ wil->fw_peri_blob.data = (void * __force)wil->csr + 0x88000;
+ wil->fw_peri_blob.size = 0x18000;
+ wil_debugfs_create_ioblob("blob_fw_peri", S_IRUGO, dbg,
+ &wil->fw_peri_blob);
+
+ wil->uc_code_blob.data = (void * __force)wil->csr + 0xa0000;
+ wil->uc_code_blob.size = 0x10000;
+ wil_debugfs_create_ioblob("blob_uc_code", S_IRUGO, dbg,
+ &wil->uc_code_blob);
+
+ wil->uc_data_blob.data = (void * __force)wil->csr + 0xb0000;
+ wil->uc_data_blob.size = 0x4000;
+ wil_debugfs_create_ioblob("blob_uc_data", S_IRUGO, dbg,
+ &wil->uc_data_blob);
+
+ return 0;
+}
+
+void wil6210_debugfs_remove(struct wil6210_priv *wil)
+{
+ debugfs_remove_recursive(wil->debug);
+ wil->debug = NULL;
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/interrupt.h>
+
+#include "wil6210.h"
+
+/**
+ * Theory of operation:
+ *
+ * There is ISR pseudo-cause register,
+ * dma_rgf->DMA_RGF.PSEUDO_CAUSE.PSEUDO_CAUSE
+ * Its bits represents OR'ed bits from 3 real ISR registers:
+ * TX, RX, and MISC.
+ *
+ * Registers may be configured to either "write 1 to clear" or
+ * "clear on read" mode
+ *
+ * When handling interrupt, one have to mask/unmask interrupts for the
+ * real ISR registers, or hardware may malfunction.
+ *
+ */
+
+#define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL)
+#define WIL6210_IMC_RX BIT_DMA_EP_RX_ICR_RX_DONE
+#define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \
+ BIT_DMA_EP_TX_ICR_TX_DONE_N(0))
+#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | ISR_MISC_MBOX_EVT)
+
+#define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \
+ BIT_DMA_PSEUDO_CAUSE_TX | \
+ BIT_DMA_PSEUDO_CAUSE_MISC))
+
+#if defined(CONFIG_WIL6210_ISR_COR)
+/* configure to Clear-On-Read mode */
+#define WIL_ICR_ICC_VALUE (0xFFFFFFFFUL)
+
+static inline void wil_icr_clear(u32 x, void __iomem *addr)
+{
+
+}
+#else /* defined(CONFIG_WIL6210_ISR_COR) */
+/* configure to Write-1-to-Clear mode */
+#define WIL_ICR_ICC_VALUE (0UL)
+
+static inline void wil_icr_clear(u32 x, void __iomem *addr)
+{
+ iowrite32(x, addr);
+}
+#endif /* defined(CONFIG_WIL6210_ISR_COR) */
+
+static inline u32 wil_ioread32_and_clear(void __iomem *addr)
+{
+ u32 x = ioread32(addr);
+
+ wil_icr_clear(x, addr);
+
+ return x;
+}
+
+static void wil6210_mask_irq_tx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_rx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_misc(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+
+ clear_bit(wil_status_irqen, &wil->status);
+}
+
+static void wil6210_unmask_irq_tx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_TX, wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_rx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_RX, wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_misc(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_MISC, wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ set_bit(wil_status_irqen, &wil->status);
+
+ iowrite32(WIL6210_IRQ_PSEUDO_MASK, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+}
+
+void wil6210_disable_irq(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ wil6210_mask_irq_tx(wil);
+ wil6210_mask_irq_rx(wil);
+ wil6210_mask_irq_misc(wil);
+ wil6210_mask_irq_pseudo(wil);
+}
+
+void wil6210_enable_irq(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+
+ wil6210_unmask_irq_pseudo(wil);
+ wil6210_unmask_irq_tx(wil);
+ wil6210_unmask_irq_rx(wil);
+ wil6210_unmask_irq_misc(wil);
+}
+
+static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR RX 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: RX\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_rx(wil);
+
+ if (isr & BIT_DMA_EP_RX_ICR_RX_DONE) {
+ wil_dbg_IRQ(wil, "RX done\n");
+ isr &= ~BIT_DMA_EP_RX_ICR_RX_DONE;
+ wil_rx_handle(wil);
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled RX ISR bits 0x%08x\n", isr);
+
+ wil6210_unmask_irq_rx(wil);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR TX 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: TX\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_tx(wil);
+
+ if (isr & BIT_DMA_EP_TX_ICR_TX_DONE) {
+ uint i;
+ wil_dbg_IRQ(wil, "TX done\n");
+ isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
+ for (i = 0; i < 24; i++) {
+ u32 mask = BIT_DMA_EP_TX_ICR_TX_DONE_N(i);
+ if (isr & mask) {
+ isr &= ~mask;
+ wil_dbg_IRQ(wil, "TX done(%i)\n", i);
+ wil_tx_complete(wil, i);
+ }
+ }
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled TX ISR bits 0x%08x\n", isr);
+
+ wil6210_unmask_irq_tx(wil);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR MISC 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: MISC\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_misc(wil);
+
+ if (isr & ISR_MISC_FW_READY) {
+ wil_dbg_IRQ(wil, "IRQ: FW ready\n");
+ /**
+ * Actual FW ready indicated by the
+ * WMI_FW_READY_EVENTID
+ */
+ isr &= ~ISR_MISC_FW_READY;
+ }
+
+ wil->isr_misc = isr;
+
+ if (isr) {
+ return IRQ_WAKE_THREAD;
+ } else {
+ wil6210_unmask_irq_misc(wil);
+ return IRQ_HANDLED;
+ }
+}
+
+static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil->isr_misc;
+
+ wil_dbg_IRQ(wil, "Thread ISR MISC 0x%08x\n", isr);
+
+ if (isr & ISR_MISC_MBOX_EVT) {
+ wil_dbg_IRQ(wil, "MBOX event\n");
+ wmi_recv_cmd(wil);
+ isr &= ~ISR_MISC_MBOX_EVT;
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled MISC ISR bits 0x%08x\n", isr);
+
+ wil->isr_misc = 0;
+
+ wil6210_unmask_irq_misc(wil);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * thread IRQ handler
+ */
+static irqreturn_t wil6210_thread_irq(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+
+ wil_dbg_IRQ(wil, "Thread IRQ\n");
+ /* Discover real IRQ cause */
+ if (wil->isr_misc)
+ wil6210_irq_misc_thread(irq, cookie);
+
+ wil6210_unmask_irq_pseudo(wil);
+
+ return IRQ_HANDLED;
+}
+
+/* DEBUG
+ * There is subtle bug in hardware that causes IRQ to raise when it should be
+ * masked. It is quite rare and hard to debug.
+ *
+ * Catch irq issue if it happens and print all I can.
+ */
+static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause)
+{
+ if (!test_bit(wil_status_irqen, &wil->status)) {
+ u32 icm_rx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_rx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_rx = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ u32 icm_tx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_tx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_tx = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ u32 icm_misc = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_misc = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_misc = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ wil_err(wil, "IRQ when it should be masked: pseudo 0x%08x\n"
+ "Rx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
+ "Tx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
+ "Misc icm:icr:imv 0x%08x 0x%08x 0x%08x\n",
+ pseudo_cause,
+ icm_rx, icr_rx, imv_rx,
+ icm_tx, icr_tx, imv_tx,
+ icm_misc, icr_misc, imv_misc);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t wil6210_hardirq(int irq, void *cookie)
+{
+ irqreturn_t rc = IRQ_HANDLED;
+ struct wil6210_priv *wil = cookie;
+ u32 pseudo_cause = ioread32(wil->csr + HOSTADDR(RGF_DMA_PSEUDO_CAUSE));
+
+ /**
+ * pseudo_cause is Clear-On-Read, no need to ACK
+ */
+ if ((pseudo_cause == 0) || ((pseudo_cause & 0xff) == 0xff))
+ return IRQ_NONE;
+
+ /* FIXME: IRQ mask debug */
+ if (wil6210_debug_irq_mask(wil, pseudo_cause))
+ return IRQ_NONE;
+
+ wil6210_mask_irq_pseudo(wil);
+
+ /* Discover real IRQ cause
+ * There are 2 possible phases for every IRQ:
+ * - hard IRQ handler called right here
+ * - threaded handler called later
+ *
+ * Hard IRQ handler reads and clears ISR.
+ *
+ * If threaded handler requested, hard IRQ handler
+ * returns IRQ_WAKE_THREAD and saves ISR register value
+ * for the threaded handler use.
+ *
+ * voting for wake thread - need at least 1 vote
+ */
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_RX) &&
+ (wil6210_irq_rx(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_TX) &&
+ (wil6210_irq_tx(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_MISC) &&
+ (wil6210_irq_misc(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ /* if thread is requested, it will unmask IRQ */
+ if (rc != IRQ_WAKE_THREAD)
+ wil6210_unmask_irq_pseudo(wil);
+
+ wil_dbg_IRQ(wil, "Hard IRQ 0x%08x\n", pseudo_cause);
+
+ return rc;
+}
+
+static int wil6210_request_3msi(struct wil6210_priv *wil, int irq)
+{
+ int rc;
+ /*
+ * IRQ's are in the following order:
+ * - Tx
+ * - Rx
+ * - Misc
+ */
+
+ rc = request_irq(irq, wil6210_irq_tx, IRQF_SHARED,
+ WIL_NAME"_tx", wil);
+ if (rc)
+ return rc;
+
+ rc = request_irq(irq + 1, wil6210_irq_rx, IRQF_SHARED,
+ WIL_NAME"_rx", wil);
+ if (rc)
+ goto free0;
+
+ rc = request_threaded_irq(irq + 2, wil6210_irq_misc,
+ wil6210_irq_misc_thread,
+ IRQF_SHARED, WIL_NAME"_misc", wil);
+ if (rc)
+ goto free1;
+
+ return 0;
+ /* error branch */
+free1:
+ free_irq(irq + 1, wil);
+free0:
+ free_irq(irq, wil);
+
+ return rc;
+}
+
+int wil6210_init_irq(struct wil6210_priv *wil, int irq)
+{
+ int rc;
+ if (wil->n_msi == 3)
+ rc = wil6210_request_3msi(wil, irq);
+ else
+ rc = request_threaded_irq(irq, wil6210_hardirq,
+ wil6210_thread_irq,
+ wil->n_msi ? 0 : IRQF_SHARED,
+ WIL_NAME, wil);
+ if (rc)
+ return rc;
+
+ wil6210_enable_irq(wil);
+
+ return 0;
+}
+
+void wil6210_fini_irq(struct wil6210_priv *wil, int irq)
+{
+ wil6210_disable_irq(wil);
+ free_irq(irq, wil);
+ if (wil->n_msi == 3) {
+ free_irq(irq + 1, wil);
+ free_irq(irq + 2, wil);
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/if_arp.h>
+
+#include "wil6210.h"
+
+/*
+ * Due to a hardware issue,
+ * one has to read/write to/from NIC in 32-bit chunks;
+ * regular memcpy_fromio and siblings will
+ * not work on 64-bit platform - it uses 64-bit transactions
+ *
+ * Force 32-bit transactions to enable NIC on 64-bit platforms
+ *
+ * To avoid byte swap on big endian host, __raw_{read|write}l
+ * should be used - {read|write}l would swap bytes to provide
+ * little endian on PCI value in host endianness.
+ */
+void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
+ size_t count)
+{
+ u32 *d = dst;
+ const volatile u32 __iomem *s = src;
+
+ /* size_t is unsigned, if (count%4 != 0) it will wrap */
+ for (count += 4; count > 4; count -= 4)
+ *d++ = __raw_readl(s++);
+}
+
+void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
+ size_t count)
+{
+ volatile u32 __iomem *d = dst;
+ const u32 *s = src;
+
+ for (count += 4; count > 4; count -= 4)
+ __raw_writel(*s++, d++);
+}
+
+static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
+{
+ uint i;
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ wil_link_off(wil);
+ clear_bit(wil_status_fwconnected, &wil->status);
+
+ switch (wdev->sme_state) {
+ case CFG80211_SME_CONNECTED:
+ cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE,
+ NULL, 0, GFP_KERNEL);
+ break;
+ case CFG80211_SME_CONNECTING:
+ cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ GFP_KERNEL);
+ break;
+ default:
+ ;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
+ wil_vring_fini_tx(wil, i);
+}
+
+static void wil_disconnect_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work,
+ struct wil6210_priv, disconnect_worker);
+
+ _wil6210_disconnect(wil, NULL);
+}
+
+static void wil_connect_timer_fn(ulong x)
+{
+ struct wil6210_priv *wil = (void *)x;
+
+ wil_dbg(wil, "Connect timeout\n");
+
+ /* reschedule to thread context - disconnect won't
+ * run from atomic context
+ */
+ schedule_work(&wil->disconnect_worker);
+}
+
+int wil_priv_init(struct wil6210_priv *wil)
+{
+ wil_dbg(wil, "%s()\n", __func__);
+
+ mutex_init(&wil->mutex);
+ mutex_init(&wil->wmi_mutex);
+
+ init_completion(&wil->wmi_ready);
+
+ wil->pending_connect_cid = -1;
+ setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
+
+ INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker);
+ INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
+ INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
+
+ INIT_LIST_HEAD(&wil->pending_wmi_ev);
+ spin_lock_init(&wil->wmi_ev_lock);
+
+ wil->wmi_wq = create_singlethread_workqueue(WIL_NAME"_wmi");
+ if (!wil->wmi_wq)
+ return -EAGAIN;
+
+ wil->wmi_wq_conn = create_singlethread_workqueue(WIL_NAME"_connect");
+ if (!wil->wmi_wq_conn) {
+ destroy_workqueue(wil->wmi_wq);
+ return -EAGAIN;
+ }
+
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+
+ return 0;
+}
+
+void wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
+{
+ del_timer_sync(&wil->connect_timer);
+ _wil6210_disconnect(wil, bssid);
+}
+
+void wil_priv_deinit(struct wil6210_priv *wil)
+{
+ cancel_work_sync(&wil->disconnect_worker);
+ wil6210_disconnect(wil, NULL);
+ wmi_event_flush(wil);
+ destroy_workqueue(wil->wmi_wq_conn);
+ destroy_workqueue(wil->wmi_wq);
+}
+
+static void wil_target_reset(struct wil6210_priv *wil)
+{
+ wil_dbg(wil, "Resetting...\n");
+
+ /* register write */
+#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
+ /* register set = read, OR, write */
+#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
+ wil->csr + HOSTADDR(a))
+
+ /* hpal_perst_from_pad_src_n_mask */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
+ /* car_perst_rst_src_n_mask */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7));
+
+ W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
+ W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
+
+ msleep(100);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
+
+ msleep(100);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+
+ msleep(2000);
+
+ W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */
+
+ msleep(2000);
+
+ wil_dbg(wil, "Reset completed\n");
+
+#undef W
+#undef S
+}
+
+void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
+{
+ le32_to_cpus(&r->base);
+ le16_to_cpus(&r->entry_size);
+ le16_to_cpus(&r->size);
+ le32_to_cpus(&r->tail);
+ le32_to_cpus(&r->head);
+}
+
+static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
+{
+ ulong to = msecs_to_jiffies(1000);
+ ulong left = wait_for_completion_timeout(&wil->wmi_ready, to);
+ if (0 == left) {
+ wil_err(wil, "Firmware not ready\n");
+ return -ETIME;
+ } else {
+ wil_dbg(wil, "FW ready after %d ms\n",
+ jiffies_to_msecs(to-left));
+ }
+ return 0;
+}
+
+/*
+ * We reset all the structures, and we reset the UMAC.
+ * After calling this routine, you're expected to reload
+ * the firmware.
+ */
+int wil_reset(struct wil6210_priv *wil)
+{
+ int rc;
+
+ cancel_work_sync(&wil->disconnect_worker);
+ wil6210_disconnect(wil, NULL);
+
+ wmi_event_flush(wil);
+
+ flush_workqueue(wil->wmi_wq);
+ flush_workqueue(wil->wmi_wq_conn);
+
+ wil6210_disable_irq(wil);
+ wil->status = 0;
+
+ /* TODO: put MAC in reset */
+ wil_target_reset(wil);
+
+ /* init after reset */
+ wil->pending_connect_cid = -1;
+ INIT_COMPLETION(wil->wmi_ready);
+
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+
+ /* TODO: release MAC reset */
+ wil6210_enable_irq(wil);
+
+ /* we just started MAC, wait for FW ready */
+ rc = wil_wait_for_fw_ready(wil);
+
+ return rc;
+}
+
+
+void wil_link_on(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ netif_carrier_on(ndev);
+ netif_tx_wake_all_queues(ndev);
+}
+
+void wil_link_off(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ netif_tx_stop_all_queues(ndev);
+ netif_carrier_off(ndev);
+}
+
+static int __wil_up(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct ieee80211_channel *channel = wdev->preset_chandef.chan;
+ int rc;
+ int bi;
+ u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ rc = wil_reset(wil);
+ if (rc)
+ return rc;
+
+ /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
+ wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ wil_dbg(wil, "type: STATION\n");
+ bi = 0;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_AP:
+ wil_dbg(wil, "type: AP\n");
+ bi = 100;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_P2P_CLIENT:
+ wil_dbg(wil, "type: P2P_CLIENT\n");
+ bi = 0;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_P2P_GO:
+ wil_dbg(wil, "type: P2P_GO\n");
+ bi = 100;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ wil_dbg(wil, "type: Monitor\n");
+ bi = 0;
+ ndev->type = ARPHRD_IEEE80211_RADIOTAP;
+ /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ /* Apply profile in the following order: */
+ /* SSID and channel for the AP */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
+ if (wdev->ssid_len == 0) {
+ wil_err(wil, "SSID not set\n");
+ return -EINVAL;
+ }
+ wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
+ if (channel)
+ wmi_set_channel(wil, channel->hw_value);
+ break;
+ default:
+ ;
+ }
+
+ /* MAC address - pre-requisite for other commands */
+ wmi_set_mac_address(wil, ndev->dev_addr);
+
+ /* Set up beaconing if required. */
+ rc = wmi_set_bcon(wil, bi, wmi_nettype);
+ if (rc)
+ return rc;
+
+ /* Rx VRING. After MAC and beacon */
+ wil_rx_init(wil);
+
+ return 0;
+}
+
+int wil_up(struct wil6210_priv *wil)
+{
+ int rc;
+
+ mutex_lock(&wil->mutex);
+ rc = __wil_up(wil);
+ mutex_unlock(&wil->mutex);
+
+ return rc;
+}
+
+static int __wil_down(struct wil6210_priv *wil)
+{
+ if (wil->scan_request) {
+ cfg80211_scan_done(wil->scan_request, true);
+ wil->scan_request = NULL;
+ }
+
+ wil6210_disconnect(wil, NULL);
+ wil_rx_fini(wil);
+
+ return 0;
+}
+
+int wil_down(struct wil6210_priv *wil)
+{
+ int rc;
+
+ mutex_lock(&wil->mutex);
+ rc = __wil_down(wil);
+ mutex_unlock(&wil->mutex);
+
+ return rc;
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/slab.h>
+
+#include "wil6210.h"
+
+static int wil_open(struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_up(wil);
+}
+
+static int wil_stop(struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_down(wil);
+}
+
+/*
+ * AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static u16 wil_select_queue(struct net_device *ndev, struct sk_buff *skb)
+{
+ static const u16 wil_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ u16 rc;
+
+ skb->priority = cfg80211_classify8021d(skb);
+
+ rc = wil_1d_to_queue[skb->priority];
+
+ wil_dbg_TXRX(wil, "%s() %d -> %d\n", __func__, (int)skb->priority,
+ (int)rc);
+
+ return rc;
+}
+
+static const struct net_device_ops wil_netdev_ops = {
+ .ndo_open = wil_open,
+ .ndo_stop = wil_stop,
+ .ndo_start_xmit = wil_start_xmit,
+ .ndo_select_queue = wil_select_queue,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr)
+{
+ struct net_device *ndev;
+ struct wireless_dev *wdev;
+ struct wil6210_priv *wil;
+ struct ieee80211_channel *ch;
+ int rc = 0;
+
+ wdev = wil_cfg80211_init(dev);
+ if (IS_ERR(wdev)) {
+ dev_err(dev, "wil_cfg80211_init failed\n");
+ return wdev;
+ }
+
+ wil = wdev_to_wil(wdev);
+ wil->csr = csr;
+ wil->wdev = wdev;
+
+ rc = wil_priv_init(wil);
+ if (rc) {
+ dev_err(dev, "wil_priv_init failed\n");
+ goto out_wdev;
+ }
+
+ wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
+ /* default monitor channel */
+ ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
+ cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
+
+ ndev = alloc_netdev_mqs(0, "wlan%d", ether_setup, WIL6210_TX_QUEUES, 1);
+ if (!ndev) {
+ dev_err(dev, "alloc_netdev_mqs failed\n");
+ rc = -ENOMEM;
+ goto out_priv;
+ }
+
+ ndev->netdev_ops = &wil_netdev_ops;
+ ndev->ieee80211_ptr = wdev;
+ SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
+ wdev->netdev = ndev;
+
+ wil_link_off(wil);
+
+ return wil;
+
+ out_priv:
+ wil_priv_deinit(wil);
+
+ out_wdev:
+ wil_wdev_free(wil);
+
+ return ERR_PTR(rc);
+}
+
+void wil_if_free(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ if (!ndev)
+ return;
+
+ free_netdev(ndev);
+ wil_priv_deinit(wil);
+ wil_wdev_free(wil);
+}
+
+int wil_if_add(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ int rc;
+
+ rc = register_netdev(ndev);
+ if (rc < 0) {
+ dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
+ return rc;
+ }
+
+ wil_link_off(wil);
+
+ return 0;
+}
+
+void wil_if_remove(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ unregister_netdev(ndev);
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+
+static int use_msi = 1;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi,
+ " Use MSI interrupt: "
+ "0 - don't, 1 - (default) - single, or 3");
+
+/* Bus ops */
+static int wil_if_pcie_enable(struct wil6210_priv *wil)
+{
+ struct pci_dev *pdev = wil->pdev;
+ int rc;
+
+ pci_set_master(pdev);
+
+ /*
+ * how many MSI interrupts to request?
+ */
+ switch (use_msi) {
+ case 3:
+ case 1:
+ case 0:
+ break;
+ default:
+ wil_err(wil, "Invalid use_msi=%d, default to 1\n",
+ use_msi);
+ use_msi = 1;
+ }
+ wil->n_msi = use_msi;
+ if (wil->n_msi) {
+ wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi);
+ rc = pci_enable_msi_block(pdev, wil->n_msi);
+ if (rc && (wil->n_msi == 3)) {
+ wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
+ wil->n_msi = 1;
+ rc = pci_enable_msi_block(pdev, wil->n_msi);
+ }
+ if (rc) {
+ wil_err(wil, "pci_enable_msi failed, use INTx\n");
+ wil->n_msi = 0;
+ }
+ } else {
+ wil_dbg(wil, "MSI interrupts disabled, use INTx\n");
+ }
+
+ rc = wil6210_init_irq(wil, pdev->irq);
+ if (rc)
+ goto stop_master;
+
+ /* need reset here to obtain MAC */
+ rc = wil_reset(wil);
+ if (rc)
+ goto release_irq;
+
+ return 0;
+
+ release_irq:
+ wil6210_fini_irq(wil, pdev->irq);
+ /* safe to call if no MSI */
+ pci_disable_msi(pdev);
+ stop_master:
+ pci_clear_master(pdev);
+ return rc;
+}
+
+static int wil_if_pcie_disable(struct wil6210_priv *wil)
+{
+ struct pci_dev *pdev = wil->pdev;
+
+ pci_clear_master(pdev);
+ /* disable and release IRQ */
+ wil6210_fini_irq(wil, pdev->irq);
+ /* safe to call if no MSI */
+ pci_disable_msi(pdev);
+ /* TODO: disable HW */
+
+ return 0;
+}
+
+static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct wil6210_priv *wil;
+ struct device *dev = &pdev->dev;
+ void __iomem *csr;
+ int rc;
+
+ /* check HW */
+ dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n",
+ (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
+
+ if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
+ dev_err(&pdev->dev, "Not " WIL_NAME "? "
+ "BAR0 size is %lu while expecting %lu\n",
+ (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
+ return -ENODEV;
+ }
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ return -ENODEV;
+ }
+ /* rollback to err_disable_pdev */
+
+ rc = pci_request_region(pdev, 0, WIL_NAME);
+ if (rc) {
+ dev_err(&pdev->dev, "pci_request_region failed\n");
+ goto err_disable_pdev;
+ }
+ /* rollback to err_release_reg */
+
+ csr = pci_ioremap_bar(pdev, 0);
+ if (!csr) {
+ dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
+ rc = -ENODEV;
+ goto err_release_reg;
+ }
+ /* rollback to err_iounmap */
+ dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr);
+
+ wil = wil_if_alloc(dev, csr);
+ if (IS_ERR(wil)) {
+ rc = (int)PTR_ERR(wil);
+ dev_err(dev, "wil_if_alloc failed: %d\n", rc);
+ goto err_iounmap;
+ }
+ /* rollback to if_free */
+
+ pci_set_drvdata(pdev, wil);
+ wil->pdev = pdev;
+
+ /* FW should raise IRQ when ready */
+ rc = wil_if_pcie_enable(wil);
+ if (rc) {
+ wil_err(wil, "Enable device failed\n");
+ goto if_free;
+ }
+ /* rollback to bus_disable */
+
+ rc = wil_if_add(wil);
+ if (rc) {
+ wil_err(wil, "wil_if_add failed: %d\n", rc);
+ goto bus_disable;
+ }
+
+ wil6210_debugfs_init(wil);
+
+ /* check FW is alive */
+ wmi_echo(wil);
+
+ return 0;
+
+ bus_disable:
+ wil_if_pcie_disable(wil);
+ if_free:
+ wil_if_free(wil);
+ err_iounmap:
+ pci_iounmap(pdev, csr);
+ err_release_reg:
+ pci_release_region(pdev, 0);
+ err_disable_pdev:
+ pci_disable_device(pdev);
+
+ return rc;
+}
+
+static void wil_pcie_remove(struct pci_dev *pdev)
+{
+ struct wil6210_priv *wil = pci_get_drvdata(pdev);
+
+ wil6210_debugfs_remove(wil);
+ wil_if_pcie_disable(wil);
+ wil_if_remove(wil);
+ wil_if_free(wil);
+ pci_iounmap(pdev, wil->csr);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = {
+ { PCI_DEVICE(0x1ae9, 0x0301) },
+ { /* end: all zeroes */ },
+};
+MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
+
+static struct pci_driver wil6210_driver = {
+ .probe = wil_pcie_probe,
+ .remove = wil_pcie_remove,
+ .id_table = wil6210_pcie_ids,
+ .name = WIL_NAME,
+};
+
+module_pci_driver(wil6210_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
+MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/hardirq.h>
+#include <net/ieee80211_radiotap.h>
+#include <linux/if_arp.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+#include "txrx.h"
+
+static bool rtap_include_phy_info;
+module_param(rtap_include_phy_info, bool, S_IRUGO);
+MODULE_PARM_DESC(rtap_include_phy_info,
+ " Include PHY info in the radiotap header, default - no");
+
+static inline int wil_vring_is_empty(struct vring *vring)
+{
+ return vring->swhead == vring->swtail;
+}
+
+static inline u32 wil_vring_next_tail(struct vring *vring)
+{
+ return (vring->swtail + 1) % vring->size;
+}
+
+static inline void wil_vring_advance_head(struct vring *vring, int n)
+{
+ vring->swhead = (vring->swhead + n) % vring->size;
+}
+
+static inline int wil_vring_is_full(struct vring *vring)
+{
+ return wil_vring_next_tail(vring) == vring->swhead;
+}
+/*
+ * Available space in Tx Vring
+ */
+static inline int wil_vring_avail_tx(struct vring *vring)
+{
+ u32 swhead = vring->swhead;
+ u32 swtail = vring->swtail;
+ int used = (vring->size + swhead - swtail) % vring->size;
+
+ return vring->size - used - 1;
+}
+
+static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
+{
+ struct device *dev = wil_to_dev(wil);
+ size_t sz = vring->size * sizeof(vring->va[0]);
+ uint i;
+
+ BUILD_BUG_ON(sizeof(vring->va[0]) != 32);
+
+ vring->swhead = 0;
+ vring->swtail = 0;
+ vring->ctx = kzalloc(vring->size * sizeof(vring->ctx[0]), GFP_KERNEL);
+ if (!vring->ctx) {
+ wil_err(wil, "vring_alloc [%d] failed to alloc ctx mem\n",
+ vring->size);
+ vring->va = NULL;
+ return -ENOMEM;
+ }
+ /*
+ * vring->va should be aligned on its size rounded up to power of 2
+ * This is granted by the dma_alloc_coherent
+ */
+ vring->va = dma_alloc_coherent(dev, sz, &vring->pa, GFP_KERNEL);
+ if (!vring->va) {
+ wil_err(wil, "vring_alloc [%d] failed to alloc DMA mem\n",
+ vring->size);
+ kfree(vring->ctx);
+ vring->ctx = NULL;
+ return -ENOMEM;
+ }
+ /* initially, all descriptors are SW owned
+ * For Tx and Rx, ownership bit is at the same location, thus
+ * we can use any
+ */
+ for (i = 0; i < vring->size; i++) {
+ volatile struct vring_tx_desc *d = &(vring->va[i].tx);
+ d->dma.status = TX_DMA_STATUS_DU;
+ }
+
+ wil_dbg(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size,
+ vring->va, (unsigned long long)vring->pa, vring->ctx);
+
+ return 0;
+}
+
+static void wil_vring_free(struct wil6210_priv *wil, struct vring *vring,
+ int tx)
+{
+ struct device *dev = wil_to_dev(wil);
+ size_t sz = vring->size * sizeof(vring->va[0]);
+
+ while (!wil_vring_is_empty(vring)) {
+ if (tx) {
+ volatile struct vring_tx_desc *d =
+ &vring->va[vring->swtail].tx;
+ dma_addr_t pa = d->dma.addr_low |
+ ((u64)d->dma.addr_high << 32);
+ struct sk_buff *skb = vring->ctx[vring->swtail];
+ if (skb) {
+ dma_unmap_single(dev, pa, d->dma.length,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ vring->ctx[vring->swtail] = NULL;
+ } else {
+ dma_unmap_page(dev, pa, d->dma.length,
+ DMA_TO_DEVICE);
+ }
+ vring->swtail = wil_vring_next_tail(vring);
+ } else { /* rx */
+ volatile struct vring_rx_desc *d =
+ &vring->va[vring->swtail].rx;
+ dma_addr_t pa = d->dma.addr_low |
+ ((u64)d->dma.addr_high << 32);
+ struct sk_buff *skb = vring->ctx[vring->swhead];
+ dma_unmap_single(dev, pa, d->dma.length,
+ DMA_FROM_DEVICE);
+ kfree_skb(skb);
+ wil_vring_advance_head(vring, 1);
+ }
+ }
+ dma_free_coherent(dev, sz, (void *)vring->va, vring->pa);
+ kfree(vring->ctx);
+ vring->pa = 0;
+ vring->va = NULL;
+ vring->ctx = NULL;
+}
+
+/**
+ * Allocate one skb for Rx VRING
+ *
+ * Safe to call from IRQ
+ */
+static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring,
+ u32 i, int headroom)
+{
+ struct device *dev = wil_to_dev(wil);
+ unsigned int sz = RX_BUF_LEN;
+ volatile struct vring_rx_desc *d = &(vring->va[i].rx);
+ dma_addr_t pa;
+
+ /* TODO align */
+ struct sk_buff *skb = dev_alloc_skb(sz + headroom);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ skb_reserve(skb, headroom);
+ skb_put(skb, sz);
+
+ pa = dma_map_single(dev, skb->data, skb->len, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(dev, pa))) {
+ kfree_skb(skb);
+ return -ENOMEM;
+ }
+
+ d->dma.d0 = BIT(9) | RX_DMA_D0_CMD_DMA_IT;
+ d->dma.addr_low = lower_32_bits(pa);
+ d->dma.addr_high = (u16)upper_32_bits(pa);
+ /* ip_length don't care */
+ /* b11 don't care */
+ /* error don't care */
+ d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
+ d->dma.length = sz;
+ vring->ctx[i] = skb;
+
+ return 0;
+}
+
+/**
+ * Adds radiotap header
+ *
+ * Any error indicated as "Bad FCS"
+ *
+ * Vendor data for 04:ce:14-1 (Wilocity-1) consists of:
+ * - Rx descriptor: 32 bytes
+ * - Phy info
+ */
+static void wil_rx_add_radiotap_header(struct wil6210_priv *wil,
+ struct sk_buff *skb,
+ volatile struct vring_rx_desc *d)
+{
+ struct wireless_dev *wdev = wil->wdev;
+ struct wil6210_rtap {
+ struct ieee80211_radiotap_header rthdr;
+ /* fields should be in the order of bits in rthdr.it_present */
+ /* flags */
+ u8 flags;
+ /* channel */
+ __le16 chnl_freq __aligned(2);
+ __le16 chnl_flags;
+ /* MCS */
+ u8 mcs_present;
+ u8 mcs_flags;
+ u8 mcs_index;
+ } __packed;
+ struct wil6210_rtap_vendor {
+ struct wil6210_rtap rtap;
+ /* vendor */
+ u8 vendor_oui[3] __aligned(2);
+ u8 vendor_ns;
+ __le16 vendor_skip;
+ u8 vendor_data[0];
+ } __packed;
+ struct wil6210_rtap_vendor *rtap_vendor;
+ int rtap_len = sizeof(struct wil6210_rtap);
+ int phy_length = 0; /* phy info header size, bytes */
+ static char phy_data[128];
+ struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+
+ if (rtap_include_phy_info) {
+ rtap_len = sizeof(*rtap_vendor) + sizeof(*d);
+ /* calculate additional length */
+ if (d->dma.status & RX_DMA_STATUS_PHY_INFO) {
+ /**
+ * PHY info starts from 8-byte boundary
+ * there are 8-byte lines, last line may be partially
+ * written (HW bug), thus FW configures for last line
+ * to be excessive. Driver skips this last line.
+ */
+ int len = min_t(int, 8 + sizeof(phy_data),
+ wil_rxdesc_phy_length(d));
+ if (len > 8) {
+ void *p = skb_tail_pointer(skb);
+ void *pa = PTR_ALIGN(p, 8);
+ if (skb_tailroom(skb) >= len + (pa - p)) {
+ phy_length = len - 8;
+ memcpy(phy_data, pa, phy_length);
+ }
+ }
+ }
+ rtap_len += phy_length;
+ }
+
+ if (skb_headroom(skb) < rtap_len &&
+ pskb_expand_head(skb, rtap_len, 0, GFP_ATOMIC)) {
+ wil_err(wil, "Unable to expand headrom to %d\n", rtap_len);
+ return;
+ }
+
+ rtap_vendor = (void *)skb_push(skb, rtap_len);
+ memset(rtap_vendor, 0, rtap_len);
+
+ rtap_vendor->rtap.rthdr.it_version = PKTHDR_RADIOTAP_VERSION;
+ rtap_vendor->rtap.rthdr.it_len = cpu_to_le16(rtap_len);
+ rtap_vendor->rtap.rthdr.it_present = cpu_to_le32(
+ (1 << IEEE80211_RADIOTAP_FLAGS) |
+ (1 << IEEE80211_RADIOTAP_CHANNEL) |
+ (1 << IEEE80211_RADIOTAP_MCS));
+ if (d->dma.status & RX_DMA_STATUS_ERROR)
+ rtap_vendor->rtap.flags |= IEEE80211_RADIOTAP_F_BADFCS;
+
+ rtap_vendor->rtap.chnl_freq = cpu_to_le16(ch ? ch->center_freq : 58320);
+ rtap_vendor->rtap.chnl_flags = cpu_to_le16(0);
+
+ rtap_vendor->rtap.mcs_present = IEEE80211_RADIOTAP_MCS_HAVE_MCS;
+ rtap_vendor->rtap.mcs_flags = 0;
+ rtap_vendor->rtap.mcs_index = wil_rxdesc_mcs(d);
+
+ if (rtap_include_phy_info) {
+ rtap_vendor->rtap.rthdr.it_present |= cpu_to_le32(1 <<
+ IEEE80211_RADIOTAP_VENDOR_NAMESPACE);
+ /* OUI for Wilocity 04:ce:14 */
+ rtap_vendor->vendor_oui[0] = 0x04;
+ rtap_vendor->vendor_oui[1] = 0xce;
+ rtap_vendor->vendor_oui[2] = 0x14;
+ rtap_vendor->vendor_ns = 1;
+ /* Rx descriptor + PHY data */
+ rtap_vendor->vendor_skip = cpu_to_le16(sizeof(*d) +
+ phy_length);
+ memcpy(rtap_vendor->vendor_data, (void *)d, sizeof(*d));
+ memcpy(rtap_vendor->vendor_data + sizeof(*d), phy_data,
+ phy_length);
+ }
+}
+
+/*
+ * Fast swap in place between 2 registers
+ */
+static void wil_swap_u16(u16 *a, u16 *b)
+{
+ *a ^= *b;
+ *b ^= *a;
+ *a ^= *b;
+}
+
+static void wil_swap_ethaddr(void *data)
+{
+ struct ethhdr *eth = data;
+ u16 *s = (u16 *)eth->h_source;
+ u16 *d = (u16 *)eth->h_dest;
+
+ wil_swap_u16(s++, d++);
+ wil_swap_u16(s++, d++);
+ wil_swap_u16(s, d);
+}
+
+/**
+ * reap 1 frame from @swhead
+ *
+ * Safe to call from IRQ
+ */
+static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
+ struct vring *vring)
+{
+ struct device *dev = wil_to_dev(wil);
+ struct net_device *ndev = wil_to_ndev(wil);
+ volatile struct vring_rx_desc *d;
+ struct sk_buff *skb;
+ dma_addr_t pa;
+ unsigned int sz = RX_BUF_LEN;
+ u8 ftype;
+ u8 ds_bits;
+
+ if (wil_vring_is_empty(vring))
+ return NULL;
+
+ d = &(vring->va[vring->swhead].rx);
+ if (!(d->dma.status & RX_DMA_STATUS_DU)) {
+ /* it is not error, we just reached end of Rx done area */
+ return NULL;
+ }
+
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ skb = vring->ctx[vring->swhead];
+ dma_unmap_single(dev, pa, sz, DMA_FROM_DEVICE);
+ skb_trim(skb, d->dma.length);
+
+ wil->stats.last_mcs_rx = wil_rxdesc_mcs(d);
+
+ /* use radiotap header only if required */
+ if (ndev->type == ARPHRD_IEEE80211_RADIOTAP)
+ wil_rx_add_radiotap_header(wil, skb, d);
+
+ wil_dbg_TXRX(wil, "Rx[%3d] : %d bytes\n", vring->swhead, d->dma.length);
+ wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ wil_vring_advance_head(vring, 1);
+
+ /* no extra checks if in sniffer mode */
+ if (ndev->type != ARPHRD_ETHER)
+ return skb;
+ /*
+ * Non-data frames may be delivered through Rx DMA channel (ex: BAR)
+ * Driver should recognize it by frame type, that is found
+ * in Rx descriptor. If type is not data, it is 802.11 frame as is
+ */
+ ftype = wil_rxdesc_ftype(d) << 2;
+ if (ftype != IEEE80211_FTYPE_DATA) {
+ wil_dbg_TXRX(wil, "Non-data frame ftype 0x%08x\n", ftype);
+ /* TODO: process it */
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ if (skb->len < ETH_HLEN) {
+ wil_err(wil, "Short frame, len = %d\n", skb->len);
+ /* TODO: process it (i.e. BAR) */
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ ds_bits = wil_rxdesc_ds_bits(d);
+ if (ds_bits == 1) {
+ /*
+ * HW bug - in ToDS mode, i.e. Rx on AP side,
+ * addresses get swapped
+ */
+ wil_swap_ethaddr(skb->data);
+ }
+
+ return skb;
+}
+
+/**
+ * allocate and fill up to @count buffers in rx ring
+ * buffers posted at @swtail
+ */
+static int wil_rx_refill(struct wil6210_priv *wil, int count)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct vring *v = &wil->vring_rx;
+ u32 next_tail;
+ int rc = 0;
+ int headroom = ndev->type == ARPHRD_IEEE80211_RADIOTAP ?
+ WIL6210_RTAP_SIZE : 0;
+
+ for (; next_tail = wil_vring_next_tail(v),
+ (next_tail != v->swhead) && (count-- > 0);
+ v->swtail = next_tail) {
+ rc = wil_vring_alloc_skb(wil, v, v->swtail, headroom);
+ if (rc) {
+ wil_err(wil, "Error %d in wil_rx_refill[%d]\n",
+ rc, v->swtail);
+ break;
+ }
+ }
+ iowrite32(v->swtail, wil->csr + HOSTADDR(v->hwtail));
+
+ return rc;
+}
+
+/*
+ * Pass Rx packet to the netif. Update statistics.
+ */
+static void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
+{
+ int rc;
+ unsigned int len = skb->len;
+
+ if (in_interrupt())
+ rc = netif_rx(skb);
+ else
+ rc = netif_rx_ni(skb);
+
+ if (likely(rc == NET_RX_SUCCESS)) {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+
+ } else {
+ ndev->stats.rx_dropped++;
+ }
+}
+
+/**
+ * Proceed all completed skb's from Rx VRING
+ *
+ * Safe to call from IRQ
+ */
+void wil_rx_handle(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct vring *v = &wil->vring_rx;
+ struct sk_buff *skb;
+
+ if (!v->va) {
+ wil_err(wil, "Rx IRQ while Rx not yet initialized\n");
+ return;
+ }
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+ while (NULL != (skb = wil_vring_reap_rx(wil, v))) {
+ wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, skb_headlen(skb), false);
+
+ skb_orphan(skb);
+
+ if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ skb->dev = ndev;
+ skb_reset_mac_header(skb);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = htons(ETH_P_802_2);
+
+ } else {
+ skb->protocol = eth_type_trans(skb, ndev);
+ }
+
+ wil_netif_rx_any(skb, ndev);
+ }
+ wil_rx_refill(wil, v->size);
+}
+
+int wil_rx_init(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct vring *vring = &wil->vring_rx;
+ int rc;
+ struct wmi_cfg_rx_chain_cmd cmd = {
+ .action = WMI_RX_CHAIN_ADD,
+ .rx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(RX_BUF_LEN),
+ },
+ .mid = 0, /* TODO - what is it? */
+ .decap_trans_type = WMI_DECAP_TYPE_802_3,
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_cfg_rx_chain_done_event evt;
+ } __packed evt;
+
+ vring->size = WIL6210_RX_RING_SIZE;
+ rc = wil_vring_alloc(wil, vring);
+ if (rc)
+ return rc;
+
+ cmd.rx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
+ cmd.rx_sw_ring.ring_size = cpu_to_le16(vring->size);
+ if (wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+
+ cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON);
+ if (ch)
+ cmd.sniffer_cfg.channel = ch->hw_value - 1;
+ cmd.sniffer_cfg.phy_info_mode =
+ cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP);
+ cmd.sniffer_cfg.phy_support =
+ cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL)
+ ? WMI_SNIFFER_CP : WMI_SNIFFER_DP);
+ }
+ /* typical time for secure PCP is 840ms */
+ rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
+ WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000);
+ if (rc)
+ goto err_free;
+
+ vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr);
+
+ wil_dbg(wil, "Rx init: status %d tail 0x%08x\n",
+ le32_to_cpu(evt.evt.status), vring->hwtail);
+
+ rc = wil_rx_refill(wil, vring->size);
+ if (rc)
+ goto err_free;
+
+ return 0;
+ err_free:
+ wil_vring_free(wil, vring, 0);
+
+ return rc;
+}
+
+void wil_rx_fini(struct wil6210_priv *wil)
+{
+ struct vring *vring = &wil->vring_rx;
+
+ if (vring->va) {
+ int rc;
+ struct wmi_cfg_rx_chain_cmd cmd = {
+ .action = cpu_to_le32(WMI_RX_CHAIN_DEL),
+ .rx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(RX_BUF_LEN),
+ },
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_cfg_rx_chain_done_event cfg;
+ } __packed wmi_rx_cfg_reply;
+
+ rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
+ WMI_CFG_RX_CHAIN_DONE_EVENTID,
+ &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply),
+ 100);
+ wil_vring_free(wil, vring, 0);
+ }
+}
+
+int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
+ int cid, int tid)
+{
+ int rc;
+ struct wmi_vring_cfg_cmd cmd = {
+ .action = cpu_to_le32(WMI_VRING_CMD_ADD),
+ .vring_cfg = {
+ .tx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(TX_BUF_LEN),
+ },
+ .ringid = id,
+ .cidxtid = (cid & 0xf) | ((tid & 0xf) << 4),
+ .encap_trans_type = WMI_VRING_ENC_TYPE_802_3,
+ .mac_ctrl = 0,
+ .to_resolution = 0,
+ .agg_max_wsize = 16,
+ .schd_params = {
+ .priority = cpu_to_le16(0),
+ .timeslot_us = cpu_to_le16(0xfff),
+ },
+ },
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_vring_cfg_done_event cmd;
+ } __packed reply;
+ struct vring *vring = &wil->vring_tx[id];
+
+ if (vring->va) {
+ wil_err(wil, "Tx ring [%d] already allocated\n", id);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ vring->size = size;
+ rc = wil_vring_alloc(wil, vring);
+ if (rc)
+ goto out;
+
+ cmd.vring_cfg.tx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
+ cmd.vring_cfg.tx_sw_ring.ring_size = cpu_to_le16(vring->size);
+
+ rc = wmi_call(wil, WMI_VRING_CFG_CMDID, &cmd, sizeof(cmd),
+ WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100);
+ if (rc)
+ goto out_free;
+
+ if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) {
+ wil_err(wil, "Tx config failed, status 0x%02x\n",
+ reply.cmd.status);
+ goto out_free;
+ }
+ vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
+
+ return 0;
+ out_free:
+ wil_vring_free(wil, vring, 1);
+ out:
+
+ return rc;
+}
+
+void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
+{
+ struct vring *vring = &wil->vring_tx[id];
+
+ if (!vring->va)
+ return;
+
+ wil_vring_free(wil, vring, 1);
+}
+
+static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
+ struct sk_buff *skb)
+{
+ struct vring *v = &wil->vring_tx[0];
+
+ if (v->va)
+ return v;
+
+ return NULL;
+}
+
+static int wil_tx_desc_map(volatile struct vring_tx_desc *d,
+ dma_addr_t pa, u32 len)
+{
+ d->dma.addr_low = lower_32_bits(pa);
+ d->dma.addr_high = (u16)upper_32_bits(pa);
+ d->dma.ip_length = 0;
+ /* 0..6: mac_length; 7:ip_version 0-IP6 1-IP4*/
+ d->dma.b11 = 0/*14 | BIT(7)*/;
+ d->dma.error = 0;
+ d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
+ d->dma.length = len;
+ d->dma.d0 = 0;
+ d->mac.d[0] = 0;
+ d->mac.d[1] = 0;
+ d->mac.d[2] = 0;
+ d->mac.ucode_cmd = 0;
+ /* use dst index 0 */
+ d->mac.d[1] |= BIT(MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS) |
+ (0 << MAC_CFG_DESC_TX_1_DST_INDEX_POS);
+ /* translation type: 0 - bypass; 1 - 802.3; 2 - native wifi */
+ d->mac.d[2] = BIT(MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS) |
+ (1 << MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS);
+
+ return 0;
+}
+
+static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
+ struct sk_buff *skb)
+{
+ struct device *dev = wil_to_dev(wil);
+ volatile struct vring_tx_desc *d;
+ u32 swhead = vring->swhead;
+ int avail = wil_vring_avail_tx(vring);
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ uint f;
+ int vring_index = vring - wil->vring_tx;
+ uint i = swhead;
+ dma_addr_t pa;
+
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+
+ if (avail < vring->size/8)
+ netif_tx_stop_all_queues(wil_to_ndev(wil));
+ if (avail < 1 + nr_frags) {
+ wil_err(wil, "Tx ring full. No space for %d fragments\n",
+ 1 + nr_frags);
+ return -ENOMEM;
+ }
+ d = &(vring->va[i].tx);
+
+ /* FIXME FW can accept only unicast frames for the peer */
+ memcpy(skb->data, wil->dst_addr[vring_index], ETH_ALEN);
+
+ pa = dma_map_single(dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+
+ wil_dbg_TXRX(wil, "Tx skb %d bytes %p -> %#08llx\n", skb_headlen(skb),
+ skb->data, (unsigned long long)pa);
+ wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, skb_headlen(skb), false);
+
+ if (unlikely(dma_mapping_error(dev, pa)))
+ return -EINVAL;
+ /* 1-st segment */
+ wil_tx_desc_map(d, pa, skb_headlen(skb));
+ d->mac.d[2] |= ((nr_frags + 1) <<
+ MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
+ /* middle segments */
+ for (f = 0; f < nr_frags; f++) {
+ const struct skb_frag_struct *frag =
+ &skb_shinfo(skb)->frags[f];
+ int len = skb_frag_size(frag);
+ i = (swhead + f + 1) % vring->size;
+ d = &(vring->va[i].tx);
+ pa = skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag),
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(dev, pa)))
+ goto dma_error;
+ wil_tx_desc_map(d, pa, len);
+ vring->ctx[i] = NULL;
+ }
+ /* for the last seg only */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_EOP_POS);
+ d->dma.d0 |= BIT(9); /* BUG: undocumented bit */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS);
+ d->dma.d0 |= (vring_index << DMA_CFG_DESC_TX_0_QID_POS);
+
+ wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ /* advance swhead */
+ wil_vring_advance_head(vring, nr_frags + 1);
+ wil_dbg_TXRX(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead);
+ iowrite32(vring->swhead, wil->csr + HOSTADDR(vring->hwtail));
+ /* hold reference to skb
+ * to prevent skb release before accounting
+ * in case of immediate "tx done"
+ */
+ vring->ctx[i] = skb_get(skb);
+
+ return 0;
+ dma_error:
+ /* unmap what we have mapped */
+ /* Note: increment @f to operate with positive index */
+ for (f++; f > 0; f--) {
+ i = (swhead + f) % vring->size;
+ d = &(vring->va[i].tx);
+ d->dma.status = TX_DMA_STATUS_DU;
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ if (vring->ctx[i])
+ dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ }
+
+ return -EINVAL;
+}
+
+
+netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ struct vring *vring;
+ int rc;
+
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+ if (!test_bit(wil_status_fwready, &wil->status)) {
+ wil_err(wil, "FW not ready\n");
+ goto drop;
+ }
+ if (!test_bit(wil_status_fwconnected, &wil->status)) {
+ wil_err(wil, "FW not connected\n");
+ goto drop;
+ }
+ if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ wil_err(wil, "Xmit in monitor mode not supported\n");
+ goto drop;
+ }
+ if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
+ rc = wmi_tx_eapol(wil, skb);
+ } else {
+ /* find vring */
+ vring = wil_find_tx_vring(wil, skb);
+ if (!vring) {
+ wil_err(wil, "No Tx VRING available\n");
+ goto drop;
+ }
+ /* set up vring entry */
+ rc = wil_tx_vring(wil, vring, skb);
+ }
+ switch (rc) {
+ case 0:
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ case -ENOMEM:
+ return NETDEV_TX_BUSY;
+ default:
+ ; /* goto drop; */
+ break;
+ }
+ drop:
+ netif_tx_stop_all_queues(ndev);
+ ndev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+
+ return NET_XMIT_DROP;
+}
+
+/**
+ * Clean up transmitted skb's from the Tx VRING
+ *
+ * Safe to call from IRQ
+ */
+void wil_tx_complete(struct wil6210_priv *wil, int ringid)
+{
+ struct device *dev = wil_to_dev(wil);
+ struct vring *vring = &wil->vring_tx[ringid];
+
+ if (!vring->va) {
+ wil_err(wil, "Tx irq[%d]: vring not initialized\n", ringid);
+ return;
+ }
+
+ wil_dbg_TXRX(wil, "%s(%d)\n", __func__, ringid);
+
+ while (!wil_vring_is_empty(vring)) {
+ volatile struct vring_tx_desc *d = &vring->va[vring->swtail].tx;
+ dma_addr_t pa;
+ struct sk_buff *skb;
+ if (!(d->dma.status & TX_DMA_STATUS_DU))
+ break;
+
+ wil_dbg_TXRX(wil,
+ "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n",
+ vring->swtail, d->dma.length, d->dma.status,
+ d->dma.error);
+ wil_hex_dump_TXRX("TxC ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ skb = vring->ctx[vring->swtail];
+ if (skb) {
+ dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ vring->ctx[vring->swtail] = NULL;
+ } else {
+ dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ }
+ d->dma.addr_low = 0;
+ d->dma.addr_high = 0;
+ d->dma.length = 0;
+ d->dma.status = TX_DMA_STATUS_DU;
+ vring->swtail = wil_vring_next_tail(vring);
+ }
+ if (wil_vring_avail_tx(vring) > vring->size/4)
+ netif_tx_wake_all_queues(wil_to_ndev(wil));
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WIL6210_TXRX_H
+#define WIL6210_TXRX_H
+
+#define BUF_SW_OWNED (1)
+#define BUF_HW_OWNED (0)
+
+/* size of max. Rx packet */
+#define RX_BUF_LEN (2048)
+#define TX_BUF_LEN (2048)
+/* how many bytes to reserve for rtap header? */
+#define WIL6210_RTAP_SIZE (128)
+
+/* Tx/Rx path */
+/*
+ * Tx descriptor - MAC part
+ * [dword 0]
+ * bit 0.. 9 : lifetime_expiry_value:10
+ * bit 10 : interrup_en:1
+ * bit 11 : status_en:1
+ * bit 12..13 : txss_override:2
+ * bit 14 : timestamp_insertion:1
+ * bit 15 : duration_preserve:1
+ * bit 16..21 : reserved0:6
+ * bit 22..26 : mcs_index:5
+ * bit 27 : mcs_en:1
+ * bit 28..29 : reserved1:2
+ * bit 30 : reserved2:1
+ * bit 31 : sn_preserved:1
+ * [dword 1]
+ * bit 0.. 3 : pkt_mode:4
+ * bit 4 : pkt_mode_en:1
+ * bit 5.. 7 : reserved0:3
+ * bit 8..13 : reserved1:6
+ * bit 14 : reserved2:1
+ * bit 15 : ack_policy_en:1
+ * bit 16..19 : dst_index:4
+ * bit 20 : dst_index_en:1
+ * bit 21..22 : ack_policy:2
+ * bit 23 : lifetime_en:1
+ * bit 24..30 : max_retry:7
+ * bit 31 : max_retry_en:1
+ * [dword 2]
+ * bit 0.. 7 : num_of_descriptors:8
+ * bit 8..17 : reserved:10
+ * bit 18..19 : l2_translation_type:2
+ * bit 20 : snap_hdr_insertion_en:1
+ * bit 21 : vlan_removal_en:1
+ * bit 22..31 : reserved0:10
+ * [dword 3]
+ * bit 0.. 31: ucode_cmd:32
+ */
+struct vring_tx_mac {
+ u32 d[3];
+ u32 ucode_cmd;
+} __packed;
+
+/* TX MAC Dword 0 */
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_POS 0
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_LEN 10
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_MSK 0x3FF
+
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_POS 10
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_MSK 0x400
+
+#define MAC_CFG_DESC_TX_0_STATUS_EN_POS 11
+#define MAC_CFG_DESC_TX_0_STATUS_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_STATUS_EN_MSK 0x800
+
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_POS 12
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_LEN 2
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_MSK 0x3000
+
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_POS 14
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_LEN 1
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_MSK 0x4000
+
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_POS 15
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_LEN 1
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_MSK 0x8000
+
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_POS 22
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_LEN 5
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_MSK 0x7C00000
+
+#define MAC_CFG_DESC_TX_0_MCS_EN_POS 27
+#define MAC_CFG_DESC_TX_0_MCS_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_MCS_EN_MSK 0x8000000
+
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_POS 31
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_LEN 1
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_MSK 0x80000000
+
+/* TX MAC Dword 1 */
+#define MAC_CFG_DESC_TX_1_PKT_MODE_POS 0
+#define MAC_CFG_DESC_TX_1_PKT_MODE_LEN 4
+#define MAC_CFG_DESC_TX_1_PKT_MODE_MSK 0xF
+
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_POS 4
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_MSK 0x10
+
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_POS 15
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_MSK 0x8000
+
+#define MAC_CFG_DESC_TX_1_DST_INDEX_POS 16
+#define MAC_CFG_DESC_TX_1_DST_INDEX_LEN 4
+#define MAC_CFG_DESC_TX_1_DST_INDEX_MSK 0xF0000
+
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS 20
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_MSK 0x100000
+
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_POS 21
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_LEN 2
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_MSK 0x600000
+
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_POS 23
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_MSK 0x800000
+
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_POS 24
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_LEN 7
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_MSK 0x7F000000
+
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_POS 31
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_MSK 0x80000000
+
+/* TX MAC Dword 2 */
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS 0
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_LEN 8
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_MSK 0xFF
+
+#define MAC_CFG_DESC_TX_2_RESERVED_POS 8
+#define MAC_CFG_DESC_TX_2_RESERVED_LEN 10
+#define MAC_CFG_DESC_TX_2_RESERVED_MSK 0x3FF00
+
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS 18
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_LEN 2
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_MSK 0xC0000
+
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS 20
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_LEN 1
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_MSK 0x100000
+
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_POS 21
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_LEN 1
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_MSK 0x200000
+
+/* TX MAC Dword 3 */
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_POS 0
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_LEN 32
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_MSK 0xFFFFFFFF
+
+/* TX DMA Dword 0 */
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_POS 0
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_LEN 8
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_MSK 0xFF
+
+#define DMA_CFG_DESC_TX_0_CMD_EOP_POS 8
+#define DMA_CFG_DESC_TX_0_CMD_EOP_LEN 1
+#define DMA_CFG_DESC_TX_0_CMD_EOP_MSK 0x100
+
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS 10
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_LEN 1
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_MSK 0x400
+
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_POS 11
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_LEN 2
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_MSK 0x1800
+
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_POS 13
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_MSK 0x2000
+
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_POS 14
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_MSK 0x4000
+
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_POS 15
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_MSK 0x8000
+
+#define DMA_CFG_DESC_TX_0_QID_POS 16
+#define DMA_CFG_DESC_TX_0_QID_LEN 5
+#define DMA_CFG_DESC_TX_0_QID_MSK 0x1F0000
+
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_POS 21
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_MSK 0x200000
+
+#define DMA_CFG_DESC_TX_0_L4_TYPE_POS 30
+#define DMA_CFG_DESC_TX_0_L4_TYPE_LEN 2
+#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000
+
+
+#define TX_DMA_STATUS_DU BIT(0)
+
+struct vring_tx_dma {
+ u32 d0;
+ u32 addr_low;
+ u16 addr_high;
+ u8 ip_length;
+ u8 b11; /* 0..6: mac_length; 7:ip_version */
+ u8 error; /* 0..2: err; 3..7: reserved; */
+ u8 status; /* 0: used; 1..7; reserved */
+ u16 length;
+} __packed;
+
+/*
+ * Rx descriptor - MAC part
+ * [dword 0]
+ * bit 0.. 3 : tid:4 The QoS (b3-0) TID Field
+ * bit 4.. 6 : connection_id:3 :The Source index that was found during
+ * Parsing the TA. This field is used to define the source of the packet
+ * bit 7 : reserved:1
+ * bit 8.. 9 : mac_id:2 : The MAC virtual Ring number (always zero)
+ * bit 10..11 : frame_type:2 : The FC Control (b3-2) - MPDU Type
+ * (management, data, control and extension)
+ * bit 12..15 : frame_subtype:4 : The FC Control (b7-4) - Frame Subtype
+ * bit 16..27 : seq_number:12 The received Sequence number field
+ * bit 28..31 : extended:4 extended subtype
+ * [dword 1]
+ * bit 0.. 3 : reserved
+ * bit 4.. 5 : key_id:2
+ * bit 6 : decrypt_bypass:1
+ * bit 7 : security:1
+ * bit 8.. 9 : ds_bits:2
+ * bit 10 : a_msdu_present:1 from qos header
+ * bit 11 : a_msdu_type:1 from qos header
+ * bit 12 : a_mpdu:1 part of AMPDU aggregation
+ * bit 13 : broadcast:1
+ * bit 14 : mutlicast:1
+ * bit 15 : reserved:1
+ * bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet
+ * is received from
+ * bit 21..24 : mcs:4
+ * bit 25..28 : mic_icr:4
+ * bit 29..31 : reserved:3
+ * [dword 2]
+ * bit 0.. 2 : time_slot:3 The timeslot that the MPDU is received
+ * bit 3 : fc_protocol_ver:1 The FC Control (b0) - Protocol Version
+ * bit 4 : fc_order:1 The FC Control (b15) -Order
+ * bit 5.. 7 : qos_ack_policy:3 The QoS (b6-5) ack policy Field
+ * bit 8 : esop:1 The QoS (b4) ESOP field
+ * bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field
+ * bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field
+ * bit 15 : qos_ac_constraint:1
+ * bit 16..31 : pn_15_0:16 low 2 bytes of PN
+ * [dword 3]
+ * bit 0..31 : pn_47_16:32 high 4 bytes of PN
+ */
+struct vring_rx_mac {
+ u32 d0;
+ u32 d1;
+ u16 w4;
+ u16 pn_15_0;
+ u32 pn_47_16;
+} __packed;
+
+/*
+ * Rx descriptor - DMA part
+ * [dword 0]
+ * bit 0.. 7 : l4_length:8 layer 4 length
+ * bit 8.. 9 : reserved:2
+ * bit 10 : cmd_dma_it:1
+ * bit 11..15 : reserved:5
+ * bit 16..29 : phy_info_length:14
+ * bit 30..31 : l4_type:2 valid if the L4I bit is set in the status field
+ * [dword 1]
+ * bit 0..31 : addr_low:32 The payload buffer low address
+ * [dword 2]
+ * bit 0..15 : addr_high:16 The payload buffer high address
+ * bit 16..23 : ip_length:8
+ * bit 24..30 : mac_length:7
+ * bit 31 : ip_version:1
+ * [dword 3]
+ * [byte 12] error
+ * [byte 13] status
+ * bit 0 : du:1
+ * bit 1 : eop:1
+ * bit 2 : error:1
+ * bit 3 : mi:1
+ * bit 4 : l3_identified:1
+ * bit 5 : l4_identified:1
+ * bit 6 : phy_info_included:1
+ * bit 7 : reserved:1
+ * [word 7] length
+ *
+ */
+
+#define RX_DMA_D0_CMD_DMA_IT BIT(10)
+
+#define RX_DMA_STATUS_DU BIT(0)
+#define RX_DMA_STATUS_ERROR BIT(2)
+#define RX_DMA_STATUS_PHY_INFO BIT(6)
+
+struct vring_rx_dma {
+ u32 d0;
+ u32 addr_low;
+ u16 addr_high;
+ u8 ip_length;
+ u8 b11;
+ u8 error;
+ u8 status;
+ u16 length;
+} __packed;
+
+struct vring_tx_desc {
+ struct vring_tx_mac mac;
+ struct vring_tx_dma dma;
+} __packed;
+
+struct vring_rx_desc {
+ struct vring_rx_mac mac;
+ struct vring_rx_dma dma;
+} __packed;
+
+union vring_desc {
+ struct vring_tx_desc tx;
+ struct vring_rx_desc rx;
+} __packed;
+
+static inline int wil_rxdesc_phy_length(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->dma.d0, 16, 29);
+}
+
+static inline int wil_rxdesc_mcs(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d1, 21, 24);
+}
+
+static inline int wil_rxdesc_ds_bits(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d1, 8, 9);
+}
+
+static inline int wil_rxdesc_ftype(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d0, 10, 11);
+}
+
+#endif /* WIL6210_TXRX_H */
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __WIL6210_H__
+#define __WIL6210_H__
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/cfg80211.h>
+
+#include "dbg_hexdump.h"
+
+#define WIL_NAME "wil6210"
+
+/**
+ * extract bits [@b0:@b1] (inclusive) from the value @x
+ * it should be @b0 <= @b1, or result is incorrect
+ */
+static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
+{
+ return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1);
+}
+
+#define WIL6210_MEM_SIZE (2*1024*1024UL)
+
+#define WIL6210_TX_QUEUES (4)
+
+#define WIL6210_RX_RING_SIZE (128)
+#define WIL6210_TX_RING_SIZE (128)
+#define WIL6210_MAX_TX_RINGS (24)
+
+/* Hardware definitions begin */
+
+/*
+ * Mapping
+ * RGF File | Host addr | FW addr
+ * | |
+ * user_rgf | 0x000000 | 0x880000
+ * dma_rgf | 0x001000 | 0x881000
+ * pcie_rgf | 0x002000 | 0x882000
+ * | |
+ */
+
+/* Where various structures placed in host address space */
+#define WIL6210_FW_HOST_OFF (0x880000UL)
+
+#define HOSTADDR(fwaddr) (fwaddr - WIL6210_FW_HOST_OFF)
+
+/*
+ * Interrupt control registers block
+ *
+ * each interrupt controlled by the same bit in all registers
+ */
+struct RGF_ICR {
+ u32 ICC; /* Cause Control, RW: 0 - W1C, 1 - COR */
+ u32 ICR; /* Cause, W1C/COR depending on ICC */
+ u32 ICM; /* Cause masked (ICR & ~IMV), W1C/COR depending on ICC */
+ u32 ICS; /* Cause Set, WO */
+ u32 IMV; /* Mask, RW+S/C */
+ u32 IMS; /* Mask Set, write 1 to set */
+ u32 IMC; /* Mask Clear, write 1 to clear */
+} __packed;
+
+/* registers - FW addresses */
+#define RGF_USER_USER_SCRATCH_PAD (0x8802bc)
+#define RGF_USER_USER_ICR (0x880b4c) /* struct RGF_ICR */
+ #define BIT_USER_USER_ICR_SW_INT_2 BIT(18)
+#define RGF_USER_CLKS_CTL_SW_RST_MASK_0 (0x880b14)
+#define RGF_USER_MAC_CPU_0 (0x8801fc)
+#define RGF_USER_USER_CPU_0 (0x8801e0)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_0 (0x880b04)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_1 (0x880b08)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_2 (0x880b0c)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_3 (0x880b10)
+
+#define RGF_DMA_PSEUDO_CAUSE (0x881c68)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_SW (0x881c6c)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_FW (0x881c70)
+ #define BIT_DMA_PSEUDO_CAUSE_RX BIT(0)
+ #define BIT_DMA_PSEUDO_CAUSE_TX BIT(1)
+ #define BIT_DMA_PSEUDO_CAUSE_MISC BIT(2)
+
+#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */
+ #define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0)
+ #define BIT_DMA_EP_TX_ICR_TX_DONE_N(n) BIT(n+1) /* n = [0..23] */
+#define RGF_DMA_EP_RX_ICR (0x881bd0) /* struct RGF_ICR */
+ #define BIT_DMA_EP_RX_ICR_RX_DONE BIT(0)
+#define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */
+ #define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0)
+ #define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1)
+ #define BIT_DMA_EP_MISC_ICR_FW_INT0 BIT(28)
+ #define BIT_DMA_EP_MISC_ICR_FW_INT1 BIT(29)
+
+/* Interrupt moderation control */
+#define RGF_DMA_ITR_CNT_TRSH (0x881c5c)
+#define RGF_DMA_ITR_CNT_DATA (0x881c60)
+#define RGF_DMA_ITR_CNT_CRL (0x881C64)
+ #define BIT_DMA_ITR_CNT_CRL_EN BIT(0)
+ #define BIT_DMA_ITR_CNT_CRL_EXT_TICK BIT(1)
+ #define BIT_DMA_ITR_CNT_CRL_FOREVER BIT(2)
+ #define BIT_DMA_ITR_CNT_CRL_CLR BIT(3)
+ #define BIT_DMA_ITR_CNT_CRL_REACH_TRSH BIT(4)
+
+/* popular locations */
+#define HOST_MBOX HOSTADDR(RGF_USER_USER_SCRATCH_PAD)
+#define HOST_SW_INT (HOSTADDR(RGF_USER_USER_ICR) + \
+ offsetof(struct RGF_ICR, ICS))
+#define SW_INT_MBOX BIT_USER_USER_ICR_SW_INT_2
+
+/* ISR register bits */
+#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT0
+#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT1
+
+/* Hardware definitions end */
+
+struct wil6210_mbox_ring {
+ u32 base;
+ u16 entry_size; /* max. size of mbox entry, incl. all headers */
+ u16 size;
+ u32 tail;
+ u32 head;
+} __packed;
+
+struct wil6210_mbox_ring_desc {
+ __le32 sync;
+ __le32 addr;
+} __packed;
+
+/* at HOST_OFF_WIL6210_MBOX_CTL */
+struct wil6210_mbox_ctl {
+ struct wil6210_mbox_ring tx;
+ struct wil6210_mbox_ring rx;
+} __packed;
+
+struct wil6210_mbox_hdr {
+ __le16 seq;
+ __le16 len; /* payload, bytes after this header */
+ __le16 type;
+ u8 flags;
+ u8 reserved;
+} __packed;
+
+#define WIL_MBOX_HDR_TYPE_WMI (0)
+
+/* max. value for wil6210_mbox_hdr.len */
+#define MAX_MBOXITEM_SIZE (240)
+
+struct wil6210_mbox_hdr_wmi {
+ u8 reserved0[2];
+ __le16 id;
+ __le16 info1; /* bits [0..3] - device_id, rest - unused */
+ u8 reserved1[2];
+} __packed;
+
+struct pending_wmi_event {
+ struct list_head list;
+ struct {
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_hdr_wmi wmi;
+ u8 data[0];
+ } __packed event;
+};
+
+union vring_desc;
+
+struct vring {
+ dma_addr_t pa;
+ volatile union vring_desc *va; /* vring_desc[size], WriteBack by DMA */
+ u16 size; /* number of vring_desc elements */
+ u32 swtail;
+ u32 swhead;
+ u32 hwtail; /* write here to inform hw */
+ void **ctx; /* void *ctx[size] - software context */
+};
+
+enum { /* for wil6210_priv.status */
+ wil_status_fwready = 0,
+ wil_status_fwconnected,
+ wil_status_dontscan,
+ wil_status_irqen, /* FIXME: interrupts enabled - for debug */
+};
+
+struct pci_dev;
+
+struct wil6210_stats {
+ u64 tsf;
+ u32 snr;
+ u16 last_mcs_rx;
+ u16 bf_mcs; /* last BF, used for Tx */
+ u16 my_rx_sector;
+ u16 my_tx_sector;
+ u16 peer_rx_sector;
+ u16 peer_tx_sector;
+};
+
+struct wil6210_priv {
+ struct pci_dev *pdev;
+ int n_msi;
+ struct wireless_dev *wdev;
+ void __iomem *csr;
+ ulong status;
+ /* profile */
+ u32 monitor_flags;
+ u32 secure_pcp; /* create secure PCP? */
+ int sinfo_gen;
+ /* cached ISR registers */
+ u32 isr_misc;
+ /* mailbox related */
+ struct mutex wmi_mutex;
+ struct wil6210_mbox_ctl mbox_ctl;
+ struct completion wmi_ready;
+ u16 wmi_seq;
+ u16 reply_id; /**< wait for this WMI event */
+ void *reply_buf;
+ u16 reply_size;
+ struct workqueue_struct *wmi_wq; /* for deferred calls */
+ struct work_struct wmi_event_worker;
+ struct workqueue_struct *wmi_wq_conn; /* for connect worker */
+ struct work_struct wmi_connect_worker;
+ struct work_struct disconnect_worker;
+ struct timer_list connect_timer;
+ int pending_connect_cid;
+ struct list_head pending_wmi_ev;
+ /*
+ * protect pending_wmi_ev
+ * - fill in IRQ from wil6210_irq_misc,
+ * - consumed in thread by wmi_event_worker
+ */
+ spinlock_t wmi_ev_lock;
+ /* DMA related */
+ struct vring vring_rx;
+ struct vring vring_tx[WIL6210_MAX_TX_RINGS];
+ u8 dst_addr[WIL6210_MAX_TX_RINGS][ETH_ALEN];
+ /* scan */
+ struct cfg80211_scan_request *scan_request;
+
+ struct mutex mutex; /* for wil6210_priv access in wil_{up|down} */
+ /* statistics */
+ struct wil6210_stats stats;
+ /* debugfs */
+ struct dentry *debug;
+ struct debugfs_blob_wrapper fw_code_blob;
+ struct debugfs_blob_wrapper fw_data_blob;
+ struct debugfs_blob_wrapper fw_peri_blob;
+ struct debugfs_blob_wrapper uc_code_blob;
+ struct debugfs_blob_wrapper uc_data_blob;
+ struct debugfs_blob_wrapper rgf_blob;
+};
+
+#define wil_to_wiphy(i) (i->wdev->wiphy)
+#define wil_to_dev(i) (wiphy_dev(wil_to_wiphy(i)))
+#define wiphy_to_wil(w) (struct wil6210_priv *)(wiphy_priv(w))
+#define wil_to_wdev(i) (i->wdev)
+#define wdev_to_wil(w) (struct wil6210_priv *)(wdev_priv(w))
+#define wil_to_ndev(i) (wil_to_wdev(i)->netdev)
+#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr))
+
+#define wil_dbg(wil, fmt, arg...) netdev_dbg(wil_to_ndev(wil), fmt, ##arg)
+#define wil_info(wil, fmt, arg...) netdev_info(wil_to_ndev(wil), fmt, ##arg)
+#define wil_err(wil, fmt, arg...) netdev_err(wil_to_ndev(wil), fmt, ##arg)
+
+#define wil_dbg_IRQ(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg)
+#define wil_dbg_TXRX(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg)
+#define wil_dbg_WMI(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg)
+
+#define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ wil_print_hex_dump_debug("DBG[TXRX]" prefix_str,\
+ prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define wil_hex_dump_WMI(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ wil_print_hex_dump_debug("DBG[ WMI]" prefix_str,\
+ prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
+ size_t count);
+void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
+ size_t count);
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr);
+void wil_if_free(struct wil6210_priv *wil);
+int wil_if_add(struct wil6210_priv *wil);
+void wil_if_remove(struct wil6210_priv *wil);
+int wil_priv_init(struct wil6210_priv *wil);
+void wil_priv_deinit(struct wil6210_priv *wil);
+int wil_reset(struct wil6210_priv *wil);
+void wil_link_on(struct wil6210_priv *wil);
+void wil_link_off(struct wil6210_priv *wil);
+int wil_up(struct wil6210_priv *wil);
+int wil_down(struct wil6210_priv *wil);
+void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
+
+void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr);
+void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr);
+int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
+ struct wil6210_mbox_hdr *hdr);
+int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len);
+void wmi_recv_cmd(struct wil6210_priv *wil);
+int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
+ u16 reply_id, void *reply, u8 reply_size, int to_msec);
+void wmi_connect_worker(struct work_struct *work);
+void wmi_event_worker(struct work_struct *work);
+void wmi_event_flush(struct wil6210_priv *wil);
+int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid);
+int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid);
+int wmi_set_channel(struct wil6210_priv *wil, int channel);
+int wmi_get_channel(struct wil6210_priv *wil, int *channel);
+int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb);
+int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr);
+int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr, int key_len, const void *key);
+int wmi_echo(struct wil6210_priv *wil);
+int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
+
+int wil6210_init_irq(struct wil6210_priv *wil, int irq);
+void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
+void wil6210_disable_irq(struct wil6210_priv *wil);
+void wil6210_enable_irq(struct wil6210_priv *wil);
+
+int wil6210_debugfs_init(struct wil6210_priv *wil);
+void wil6210_debugfs_remove(struct wil6210_priv *wil);
+
+struct wireless_dev *wil_cfg80211_init(struct device *dev);
+void wil_wdev_free(struct wil6210_priv *wil);
+
+int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
+int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype);
+void wil6210_disconnect(struct wil6210_priv *wil, void *bssid);
+
+int wil_rx_init(struct wil6210_priv *wil);
+void wil_rx_fini(struct wil6210_priv *wil);
+
+/* TX API */
+int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
+ int cid, int tid);
+void wil_vring_fini_tx(struct wil6210_priv *wil, int id);
+
+netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+void wil_tx_complete(struct wil6210_priv *wil, int ringid);
+
+/* RX API */
+void wil_rx_handle(struct wil6210_priv *wil);
+
+int wil_iftype_nl2wmi(enum nl80211_iftype type);
+
+#endif /* __WIL6210_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/etherdevice.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+
+/**
+ * WMI event receiving - theory of operations
+ *
+ * When firmware about to report WMI event, it fills memory area
+ * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for
+ * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler.
+ *
+ * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the
+ * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up
+ * and handles events within the @wmi_event_worker. Every event get detached
+ * from list, processed and deleted.
+ *
+ * Purpose for this mechanism is to release IRQ thread; otherwise,
+ * if WMI event handling involves another WMI command flow, this 2-nd flow
+ * won't be completed because of blocked IRQ thread.
+ */
+
+/**
+ * Addressing - theory of operations
+ *
+ * There are several buses present on the WIL6210 card.
+ * Same memory areas are visible at different address on
+ * the different busses. There are 3 main bus masters:
+ * - MAC CPU (ucode)
+ * - User CPU (firmware)
+ * - AHB (host)
+ *
+ * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
+ * AHB addresses starting from 0x880000
+ *
+ * Internally, firmware uses addresses that allows faster access but
+ * are invisible from the host. To read from these addresses, alternative
+ * AHB address must be used.
+ *
+ * Memory mapping
+ * Linker address PCI/Host address
+ * 0x880000 .. 0xa80000 2Mb BAR0
+ * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM
+ * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH
+ */
+
+/**
+ * @fw_mapping provides memory remapping table
+ */
+static const struct {
+ u32 from; /* linker address - from, inclusive */
+ u32 to; /* linker address - to, exclusive */
+ u32 host; /* PCI/Host address - BAR0 + 0x880000 */
+} fw_mapping[] = {
+ {0x000000, 0x040000, 0x8c0000}, /* FW code RAM 256k */
+ {0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */
+ {0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */
+ {0x880000, 0x88a000, 0x880000}, /* various RGF */
+ {0x8c0000, 0x932000, 0x8c0000}, /* trivial mapping for upper area */
+ /*
+ * 920000..930000 ucode code RAM
+ * 930000..932000 ucode data RAM
+ */
+};
+
+/**
+ * return AHB address for given firmware/ucode internal (linker) address
+ * @x - internal address
+ * If address have no valid AHB mapping, return 0
+ */
+static u32 wmi_addr_remap(u32 x)
+{
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
+ if ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to))
+ return x + fw_mapping[i].host - fw_mapping[i].from;
+ }
+
+ return 0;
+}
+
+/**
+ * Check address validity for WMI buffer; remap if needed
+ * @ptr - internal (linker) fw/ucode address
+ *
+ * Valid buffer should be DWORD aligned
+ *
+ * return address for accessing buffer from the host;
+ * if buffer is not valid, return NULL.
+ */
+void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_)
+{
+ u32 off;
+ u32 ptr = le32_to_cpu(ptr_);
+
+ if (ptr % 4)
+ return NULL;
+
+ ptr = wmi_addr_remap(ptr);
+ if (ptr < WIL6210_FW_HOST_OFF)
+ return NULL;
+
+ off = HOSTADDR(ptr);
+ if (off > WIL6210_MEM_SIZE - 4)
+ return NULL;
+
+ return wil->csr + off;
+}
+
+/**
+ * Check address validity
+ */
+void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr)
+{
+ u32 off;
+
+ if (ptr % 4)
+ return NULL;
+
+ if (ptr < WIL6210_FW_HOST_OFF)
+ return NULL;
+
+ off = HOSTADDR(ptr);
+ if (off > WIL6210_MEM_SIZE - 4)
+ return NULL;
+
+ return wil->csr + off;
+}
+
+int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
+ struct wil6210_mbox_hdr *hdr)
+{
+ void __iomem *src = wmi_buffer(wil, ptr);
+ if (!src)
+ return -EINVAL;
+
+ wil_memcpy_fromio_32(hdr, src, sizeof(*hdr));
+
+ return 0;
+}
+
+static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
+{
+ struct {
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_hdr_wmi wmi;
+ } __packed cmd = {
+ .hdr = {
+ .type = WIL_MBOX_HDR_TYPE_WMI,
+ .flags = 0,
+ .len = cpu_to_le16(sizeof(cmd.wmi) + len),
+ },
+ .wmi = {
+ .id = cpu_to_le16(cmdid),
+ .info1 = 0,
+ },
+ };
+ struct wil6210_mbox_ring *r = &wil->mbox_ctl.tx;
+ struct wil6210_mbox_ring_desc d_head;
+ u32 next_head;
+ void __iomem *dst;
+ void __iomem *head = wmi_addr(wil, r->head);
+ uint retry;
+
+ if (sizeof(cmd) + len > r->entry_size) {
+ wil_err(wil, "WMI size too large: %d bytes, max is %d\n",
+ (int)(sizeof(cmd) + len), r->entry_size);
+ return -ERANGE;
+
+ }
+
+ might_sleep();
+
+ if (!test_bit(wil_status_fwready, &wil->status)) {
+ wil_err(wil, "FW not ready\n");
+ return -EAGAIN;
+ }
+
+ if (!head) {
+ wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head);
+ return -EINVAL;
+ }
+ /* read Tx head till it is not busy */
+ for (retry = 5; retry > 0; retry--) {
+ wil_memcpy_fromio_32(&d_head, head, sizeof(d_head));
+ if (d_head.sync == 0)
+ break;
+ msleep(20);
+ }
+ if (d_head.sync != 0) {
+ wil_err(wil, "WMI head busy\n");
+ return -EBUSY;
+ }
+ /* next head */
+ next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size);
+ wil_dbg_WMI(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head);
+ /* wait till FW finish with previous command */
+ for (retry = 5; retry > 0; retry--) {
+ r->tail = ioread32(wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx.tail));
+ if (next_head != r->tail)
+ break;
+ msleep(20);
+ }
+ if (next_head == r->tail) {
+ wil_err(wil, "WMI ring full\n");
+ return -EBUSY;
+ }
+ dst = wmi_buffer(wil, d_head.addr);
+ if (!dst) {
+ wil_err(wil, "invalid WMI buffer: 0x%08x\n",
+ le32_to_cpu(d_head.addr));
+ return -EINVAL;
+ }
+ cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq);
+ /* set command */
+ wil_dbg_WMI(wil, "WMI command 0x%04x [%d]\n", cmdid, len);
+ wil_hex_dump_WMI("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd,
+ sizeof(cmd), true);
+ wil_hex_dump_WMI("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf,
+ len, true);
+ wil_memcpy_toio_32(dst, &cmd, sizeof(cmd));
+ wil_memcpy_toio_32(dst + sizeof(cmd), buf, len);
+ /* mark entry as full */
+ iowrite32(1, wil->csr + HOSTADDR(r->head) +
+ offsetof(struct wil6210_mbox_ring_desc, sync));
+ /* advance next ptr */
+ iowrite32(r->head = next_head, wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx.head));
+
+ /* interrupt to FW */
+ iowrite32(SW_INT_MBOX, wil->csr + HOST_SW_INT);
+
+ return 0;
+}
+
+int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
+{
+ int rc;
+
+ mutex_lock(&wil->wmi_mutex);
+ rc = __wmi_send(wil, cmdid, buf, len);
+ mutex_unlock(&wil->wmi_mutex);
+
+ return rc;
+}
+
+/*=== Event handlers ===*/
+static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct wmi_ready_event *evt = d;
+ u32 ver = le32_to_cpu(evt->sw_version);
+
+ wil_dbg_WMI(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac);
+
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ memcpy(ndev->dev_addr, evt->mac, ETH_ALEN);
+ memcpy(ndev->perm_addr, evt->mac, ETH_ALEN);
+ }
+ snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version),
+ "%d", ver);
+}
+
+static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
+ int len)
+{
+ wil_dbg_WMI(wil, "WMI: FW ready\n");
+
+ set_bit(wil_status_fwready, &wil->status);
+ /* reuse wmi_ready for the firmware ready indication */
+ complete(&wil->wmi_ready);
+}
+
+static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct wmi_rx_mgmt_packet_event *data = d;
+ struct wiphy *wiphy = wil_to_wiphy(wil);
+ struct ieee80211_mgmt *rx_mgmt_frame =
+ (struct ieee80211_mgmt *)data->payload;
+ int ch_no = data->info.channel+1;
+ u32 freq = ieee80211_channel_to_frequency(ch_no,
+ IEEE80211_BAND_60GHZ);
+ struct ieee80211_channel *channel = ieee80211_get_channel(wiphy, freq);
+ /* TODO convert LE to CPU */
+ s32 signal = 0; /* TODO */
+ __le16 fc = rx_mgmt_frame->frame_control;
+ u32 d_len = le32_to_cpu(data->info.len);
+ u16 d_status = le16_to_cpu(data->info.status);
+
+ wil_dbg_WMI(wil, "MGMT: channel %d MCS %d SNR %d\n",
+ data->info.channel, data->info.mcs, data->info.snr);
+ wil_dbg_WMI(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len,
+ le16_to_cpu(data->info.stype));
+ wil_dbg_WMI(wil, "qid %d mid %d cid %d\n",
+ data->info.qid, data->info.mid, data->info.cid);
+
+ if (!channel) {
+ wil_err(wil, "Frame on unsupported channel\n");
+ return;
+ }
+
+ if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) {
+ struct cfg80211_bss *bss;
+ u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp);
+ u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info);
+ u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int);
+ const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable;
+ size_t ie_len = d_len - offsetof(struct ieee80211_mgmt,
+ u.beacon.variable);
+ wil_dbg_WMI(wil, "Capability info : 0x%04x\n", cap);
+
+ bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid,
+ tsf, cap, bi, ie_buf, ie_len,
+ signal, GFP_KERNEL);
+ if (bss) {
+ wil_dbg_WMI(wil, "Added BSS %pM\n",
+ rx_mgmt_frame->bssid);
+ cfg80211_put_bss(bss);
+ } else {
+ wil_err(wil, "cfg80211_inform_bss() failed\n");
+ }
+ }
+}
+
+static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ if (wil->scan_request) {
+ struct wmi_scan_complete_event *data = d;
+ bool aborted = (data->status != 0);
+
+ wil_dbg_WMI(wil, "SCAN_COMPLETE(0x%08x)\n", data->status);
+ cfg80211_scan_done(wil->scan_request, aborted);
+ wil->scan_request = NULL;
+ } else {
+ wil_err(wil, "SCAN_COMPLETE while not scanning\n");
+ }
+}
+
+static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct wmi_connect_event *evt = d;
+ int ch; /* channel number */
+ struct station_info sinfo;
+ u8 *assoc_req_ie, *assoc_resp_ie;
+ size_t assoc_req_ielen, assoc_resp_ielen;
+ /* capinfo(u16) + listen_interval(u16) + IEs */
+ const size_t assoc_req_ie_offset = sizeof(u16) * 2;
+ /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */
+ const size_t assoc_resp_ie_offset = sizeof(u16) * 3;
+
+ if (len < sizeof(*evt)) {
+ wil_err(wil, "Connect event too short : %d bytes\n", len);
+ return;
+ }
+ if (len != sizeof(*evt) + evt->beacon_ie_len + evt->assoc_req_len +
+ evt->assoc_resp_len) {
+ wil_err(wil,
+ "Connect event corrupted : %d != %d + %d + %d + %d\n",
+ len, (int)sizeof(*evt), evt->beacon_ie_len,
+ evt->assoc_req_len, evt->assoc_resp_len);
+ return;
+ }
+ ch = evt->channel + 1;
+ wil_dbg_WMI(wil, "Connect %pM channel [%d] cid %d\n",
+ evt->bssid, ch, evt->cid);
+ wil_hex_dump_WMI("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1,
+ evt->assoc_info, len - sizeof(*evt), true);
+
+ /* figure out IE's */
+ assoc_req_ie = &evt->assoc_info[evt->beacon_ie_len +
+ assoc_req_ie_offset];
+ assoc_req_ielen = evt->assoc_req_len - assoc_req_ie_offset;
+ if (evt->assoc_req_len <= assoc_req_ie_offset) {
+ assoc_req_ie = NULL;
+ assoc_req_ielen = 0;
+ }
+
+ assoc_resp_ie = &evt->assoc_info[evt->beacon_ie_len +
+ evt->assoc_req_len +
+ assoc_resp_ie_offset];
+ assoc_resp_ielen = evt->assoc_resp_len - assoc_resp_ie_offset;
+ if (evt->assoc_resp_len <= assoc_resp_ie_offset) {
+ assoc_resp_ie = NULL;
+ assoc_resp_ielen = 0;
+ }
+
+ if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
+ (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
+ if (wdev->sme_state != CFG80211_SME_CONNECTING) {
+ wil_err(wil, "Not in connecting state\n");
+ return;
+ }
+ del_timer_sync(&wil->connect_timer);
+ cfg80211_connect_result(ndev, evt->bssid,
+ assoc_req_ie, assoc_req_ielen,
+ assoc_resp_ie, assoc_resp_ielen,
+ WLAN_STATUS_SUCCESS, GFP_KERNEL);
+
+ } else if ((wdev->iftype == NL80211_IFTYPE_AP) ||
+ (wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+ memset(&sinfo, 0, sizeof(sinfo));
+
+ sinfo.generation = wil->sinfo_gen++;
+
+ if (assoc_req_ie) {
+ sinfo.assoc_req_ies = assoc_req_ie;
+ sinfo.assoc_req_ies_len = assoc_req_ielen;
+ sinfo.filled |= STATION_INFO_ASSOC_REQ_IES;
+ }
+
+ cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL);
+ }
+ set_bit(wil_status_fwconnected, &wil->status);
+
+ /* FIXME FW can transmit only ucast frames to peer */
+ /* FIXME real ring_id instead of hard coded 0 */
+ memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN);
+
+ wil->pending_connect_cid = evt->cid;
+ queue_work(wil->wmi_wq_conn, &wil->wmi_connect_worker);
+}
+
+static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ struct wmi_disconnect_event *evt = d;
+
+ wil_dbg_WMI(wil, "Disconnect %pM reason %d proto %d wmi\n",
+ evt->bssid,
+ evt->protocol_reason_status, evt->disconnect_reason);
+
+ wil->sinfo_gen++;
+
+ wil6210_disconnect(wil, evt->bssid);
+ clear_bit(wil_status_dontscan, &wil->status);
+}
+
+static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct wmi_notify_req_done_event *evt = d;
+
+ if (len < sizeof(*evt)) {
+ wil_err(wil, "Short NOTIFY event\n");
+ return;
+ }
+
+ wil->stats.tsf = le64_to_cpu(evt->tsf);
+ wil->stats.snr = le32_to_cpu(evt->snr_val);
+ wil->stats.bf_mcs = le16_to_cpu(evt->bf_mcs);
+ wil->stats.my_rx_sector = le16_to_cpu(evt->my_rx_sector);
+ wil->stats.my_tx_sector = le16_to_cpu(evt->my_tx_sector);
+ wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector);
+ wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector);
+ wil_dbg_WMI(wil, "Link status, MCS %d TSF 0x%016llx\n"
+ "BF status 0x%08x SNR 0x%08x\n"
+ "Tx Tpt %d goodput %d Rx goodput %d\n"
+ "Sectors(rx:tx) my %d:%d peer %d:%d\n",
+ wil->stats.bf_mcs, wil->stats.tsf, evt->status,
+ wil->stats.snr, le32_to_cpu(evt->tx_tpt),
+ le32_to_cpu(evt->tx_goodput), le32_to_cpu(evt->rx_goodput),
+ wil->stats.my_rx_sector, wil->stats.my_tx_sector,
+ wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
+}
+
+/*
+ * Firmware reports EAPOL frame using WME event.
+ * Reconstruct Ethernet frame and deliver it via normal Rx
+ */
+static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wmi_eapol_rx_event *evt = d;
+ u16 eapol_len = le16_to_cpu(evt->eapol_len);
+ int sz = eapol_len + ETH_HLEN;
+ struct sk_buff *skb;
+ struct ethhdr *eth;
+
+ wil_dbg_WMI(wil, "EAPOL len %d from %pM\n", eapol_len,
+ evt->src_mac);
+
+ if (eapol_len > 196) { /* TODO: revisit size limit */
+ wil_err(wil, "EAPOL too large\n");
+ return;
+ }
+
+ skb = alloc_skb(sz, GFP_KERNEL);
+ if (!skb) {
+ wil_err(wil, "Failed to allocate skb\n");
+ return;
+ }
+ eth = (struct ethhdr *)skb_put(skb, ETH_HLEN);
+ memcpy(eth->h_dest, ndev->dev_addr, ETH_ALEN);
+ memcpy(eth->h_source, evt->src_mac, ETH_ALEN);
+ eth->h_proto = cpu_to_be16(ETH_P_PAE);
+ memcpy(skb_put(skb, eapol_len), evt->eapol, eapol_len);
+ skb->protocol = eth_type_trans(skb, ndev);
+ if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += skb->len;
+ } else {
+ ndev->stats.rx_dropped++;
+ }
+}
+
+static const struct {
+ int eventid;
+ void (*handler)(struct wil6210_priv *wil, int eventid,
+ void *data, int data_len);
+} wmi_evt_handlers[] = {
+ {WMI_READY_EVENTID, wmi_evt_ready},
+ {WMI_FW_READY_EVENTID, wmi_evt_fw_ready},
+ {WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt},
+ {WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete},
+ {WMI_CONNECT_EVENTID, wmi_evt_connect},
+ {WMI_DISCONNECT_EVENTID, wmi_evt_disconnect},
+ {WMI_NOTIFY_REQ_DONE_EVENTID, wmi_evt_notify},
+ {WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx},
+};
+
+/*
+ * Run in IRQ context
+ * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev
+ * that will be eventually handled by the @wmi_event_worker in the thread
+ * context of thread "wil6210_wmi"
+ */
+void wmi_recv_cmd(struct wil6210_priv *wil)
+{
+ struct wil6210_mbox_ring_desc d_tail;
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx;
+ struct pending_wmi_event *evt;
+ u8 *cmd;
+ void __iomem *src;
+ ulong flags;
+
+ for (;;) {
+ u16 len;
+
+ r->head = ioread32(wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx.head));
+ if (r->tail == r->head)
+ return;
+
+ /* read cmd from tail */
+ wil_memcpy_fromio_32(&d_tail, wil->csr + HOSTADDR(r->tail),
+ sizeof(struct wil6210_mbox_ring_desc));
+ if (d_tail.sync == 0) {
+ wil_err(wil, "Mbox evt not owned by FW?\n");
+ return;
+ }
+
+ if (0 != wmi_read_hdr(wil, d_tail.addr, &hdr)) {
+ wil_err(wil, "Mbox evt at 0x%08x?\n",
+ le32_to_cpu(d_tail.addr));
+ return;
+ }
+
+ len = le16_to_cpu(hdr.len);
+ src = wmi_buffer(wil, d_tail.addr) +
+ sizeof(struct wil6210_mbox_hdr);
+ evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event,
+ event.wmi) + len, 4),
+ GFP_KERNEL);
+ if (!evt) {
+ wil_err(wil, "kmalloc for WMI event (%d) failed\n",
+ len);
+ return;
+ }
+ evt->event.hdr = hdr;
+ cmd = (void *)&evt->event.wmi;
+ wil_memcpy_fromio_32(cmd, src, len);
+ /* mark entry as empty */
+ iowrite32(0, wil->csr + HOSTADDR(r->tail) +
+ offsetof(struct wil6210_mbox_ring_desc, sync));
+ /* indicate */
+ wil_dbg_WMI(wil, "Mbox evt %04x %04x %04x %02x\n",
+ le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type),
+ hdr.flags);
+ if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) &&
+ (len >= sizeof(struct wil6210_mbox_hdr_wmi))) {
+ wil_dbg_WMI(wil, "WMI event 0x%04x\n",
+ evt->event.wmi.id);
+ }
+ wil_hex_dump_WMI("evt ", DUMP_PREFIX_OFFSET, 16, 1,
+ &evt->event.hdr, sizeof(hdr) + len, true);
+
+ /* advance tail */
+ r->tail = r->base + ((r->tail - r->base +
+ sizeof(struct wil6210_mbox_ring_desc)) % r->size);
+ iowrite32(r->tail, wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx.tail));
+
+ /* add to the pending list */
+ spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+ list_add_tail(&evt->list, &wil->pending_wmi_ev);
+ spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+ {
+ int q = queue_work(wil->wmi_wq,
+ &wil->wmi_event_worker);
+ wil_dbg_WMI(wil, "queue_work -> %d\n", q);
+ }
+ }
+}
+
+int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
+ u16 reply_id, void *reply, u8 reply_size, int to_msec)
+{
+ int rc;
+ int remain;
+
+ mutex_lock(&wil->wmi_mutex);
+
+ rc = __wmi_send(wil, cmdid, buf, len);
+ if (rc)
+ goto out;
+
+ wil->reply_id = reply_id;
+ wil->reply_buf = reply;
+ wil->reply_size = reply_size;
+ remain = wait_for_completion_timeout(&wil->wmi_ready,
+ msecs_to_jiffies(to_msec));
+ if (0 == remain) {
+ wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n",
+ cmdid, reply_id, to_msec);
+ rc = -ETIME;
+ } else {
+ wil_dbg_WMI(wil,
+ "wmi_call(0x%04x->0x%04x) completed in %d msec\n",
+ cmdid, reply_id,
+ to_msec - jiffies_to_msecs(remain));
+ }
+ wil->reply_id = 0;
+ wil->reply_buf = NULL;
+ wil->reply_size = 0;
+ out:
+ mutex_unlock(&wil->wmi_mutex);
+
+ return rc;
+}
+
+int wmi_echo(struct wil6210_priv *wil)
+{
+ struct wmi_echo_cmd cmd = {
+ .value = cpu_to_le32(0x12345678),
+ };
+
+ return wmi_call(wil, WMI_ECHO_CMDID, &cmd, sizeof(cmd),
+ WMI_ECHO_RSP_EVENTID, NULL, 0, 20);
+}
+
+int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
+{
+ struct wmi_set_mac_address_cmd cmd;
+
+ memcpy(cmd.mac, addr, ETH_ALEN);
+
+ wil_dbg_WMI(wil, "Set MAC %pM\n", addr);
+
+ return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype)
+{
+ struct wmi_bcon_ctrl_cmd cmd = {
+ .bcon_interval = cpu_to_le16(bi),
+ .network_type = wmi_nettype,
+ .disable_sec_offload = 1,
+ };
+
+ if (!wil->secure_pcp)
+ cmd.disable_sec = 1;
+
+ return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid)
+{
+ struct wmi_set_ssid_cmd cmd = {
+ .ssid_len = cpu_to_le32(ssid_len),
+ };
+
+ if (ssid_len > sizeof(cmd.ssid))
+ return -EINVAL;
+
+ memcpy(cmd.ssid, ssid, ssid_len);
+
+ return wmi_send(wil, WMI_SET_SSID_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid)
+{
+ int rc;
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_set_ssid_cmd cmd;
+ } __packed reply;
+ int len; /* reply.cmd.ssid_len in CPU order */
+
+ rc = wmi_call(wil, WMI_GET_SSID_CMDID, NULL, 0, WMI_GET_SSID_EVENTID,
+ &reply, sizeof(reply), 20);
+ if (rc)
+ return rc;
+
+ len = le32_to_cpu(reply.cmd.ssid_len);
+ if (len > sizeof(reply.cmd.ssid))
+ return -EINVAL;
+
+ *ssid_len = len;
+ memcpy(ssid, reply.cmd.ssid, len);
+
+ return 0;
+}
+
+int wmi_set_channel(struct wil6210_priv *wil, int channel)
+{
+ struct wmi_set_pcp_channel_cmd cmd = {
+ .channel = channel - 1,
+ };
+
+ return wmi_send(wil, WMI_SET_PCP_CHANNEL_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_get_channel(struct wil6210_priv *wil, int *channel)
+{
+ int rc;
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_set_pcp_channel_cmd cmd;
+ } __packed reply;
+
+ rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, NULL, 0,
+ WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20);
+ if (rc)
+ return rc;
+
+ if (reply.cmd.channel > 3)
+ return -EINVAL;
+
+ *channel = reply.cmd.channel + 1;
+
+ return 0;
+}
+
+int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb)
+{
+ struct wmi_eapol_tx_cmd *cmd;
+ struct ethhdr *eth;
+ u16 eapol_len = skb->len - ETH_HLEN;
+ void *eapol = skb->data + ETH_HLEN;
+ uint i;
+ int rc;
+
+ skb_set_mac_header(skb, 0);
+ eth = eth_hdr(skb);
+ wil_dbg_WMI(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest);
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+ if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0)
+ goto found_dest;
+ }
+
+ return -EINVAL;
+
+ found_dest:
+ /* find out eapol data & len */
+ cmd = kzalloc(sizeof(*cmd) + eapol_len, GFP_KERNEL);
+ if (!cmd)
+ return -EINVAL;
+
+ memcpy(cmd->dst_mac, eth->h_dest, ETH_ALEN);
+ cmd->eapol_len = cpu_to_le16(eapol_len);
+ memcpy(cmd->eapol, eapol, eapol_len);
+ rc = wmi_send(wil, WMI_EAPOL_TX_CMDID, cmd, sizeof(*cmd) + eapol_len);
+ kfree(cmd);
+
+ return rc;
+}
+
+int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr)
+{
+ struct wmi_delete_cipher_key_cmd cmd = {
+ .key_index = key_index,
+ };
+
+ if (mac_addr)
+ memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
+
+ return wmi_send(wil, WMI_DELETE_CIPHER_KEY_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr, int key_len, const void *key)
+{
+ struct wmi_add_cipher_key_cmd cmd = {
+ .key_index = key_index,
+ .key_usage = WMI_KEY_USE_PAIRWISE,
+ .key_len = key_len,
+ };
+
+ if (!key || (key_len > sizeof(cmd.key)))
+ return -EINVAL;
+
+ memcpy(cmd.key, key, key_len);
+ if (mac_addr)
+ memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
+
+ return wmi_send(wil, WMI_ADD_CIPHER_KEY_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie)
+{
+ int rc;
+ u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len;
+ struct wmi_set_appie_cmd *cmd = kzalloc(len, GFP_KERNEL);
+ if (!cmd) {
+ wil_err(wil, "kmalloc(%d) failed\n", len);
+ return -ENOMEM;
+ }
+
+ cmd->mgmt_frm_type = type;
+ /* BUG: FW API define ieLen as u8. Will fix FW */
+ cmd->ie_len = cpu_to_le16(ie_len);
+ memcpy(cmd->ie_info, ie, ie_len);
+ rc = wmi_send(wil, WMI_SET_APPIE_CMDID, &cmd, len);
+ kfree(cmd);
+
+ return rc;
+}
+
+void wmi_event_flush(struct wil6210_priv *wil)
+{
+ struct pending_wmi_event *evt, *t;
+
+ wil_dbg_WMI(wil, "%s()\n", __func__);
+
+ list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) {
+ list_del(&evt->list);
+ kfree(evt);
+ }
+}
+
+static bool wmi_evt_call_handler(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(wmi_evt_handlers); i++) {
+ if (wmi_evt_handlers[i].eventid == id) {
+ wmi_evt_handlers[i].handler(wil, id, d, len);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void wmi_event_handle(struct wil6210_priv *wil,
+ struct wil6210_mbox_hdr *hdr)
+{
+ u16 len = le16_to_cpu(hdr->len);
+
+ if ((hdr->type == WIL_MBOX_HDR_TYPE_WMI) &&
+ (len >= sizeof(struct wil6210_mbox_hdr_wmi))) {
+ struct wil6210_mbox_hdr_wmi *wmi = (void *)(&hdr[1]);
+ void *evt_data = (void *)(&wmi[1]);
+ u16 id = le16_to_cpu(wmi->id);
+ /* check if someone waits for this event */
+ if (wil->reply_id && wil->reply_id == id) {
+ if (wil->reply_buf) {
+ memcpy(wil->reply_buf, wmi,
+ min(len, wil->reply_size));
+ } else {
+ wmi_evt_call_handler(wil, id, evt_data,
+ len - sizeof(*wmi));
+ }
+ wil_dbg_WMI(wil, "Complete WMI 0x%04x\n", id);
+ complete(&wil->wmi_ready);
+ return;
+ }
+ /* unsolicited event */
+ /* search for handler */
+ if (!wmi_evt_call_handler(wil, id, evt_data,
+ len - sizeof(*wmi))) {
+ wil_err(wil, "Unhandled event 0x%04x\n", id);
+ }
+ } else {
+ wil_err(wil, "Unknown event type\n");
+ print_hex_dump(KERN_ERR, "evt?? ", DUMP_PREFIX_OFFSET, 16, 1,
+ hdr, sizeof(*hdr) + len, true);
+ }
+}
+
+/*
+ * Retrieve next WMI event from the pending list
+ */
+static struct list_head *next_wmi_ev(struct wil6210_priv *wil)
+{
+ ulong flags;
+ struct list_head *ret = NULL;
+
+ spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+
+ if (!list_empty(&wil->pending_wmi_ev)) {
+ ret = wil->pending_wmi_ev.next;
+ list_del(ret);
+ }
+
+ spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+
+ return ret;
+}
+
+/*
+ * Handler for the WMI events
+ */
+void wmi_event_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ wmi_event_worker);
+ struct pending_wmi_event *evt;
+ struct list_head *lh;
+
+ while ((lh = next_wmi_ev(wil)) != NULL) {
+ evt = list_entry(lh, struct pending_wmi_event, list);
+ wmi_event_handle(wil, &evt->event.hdr);
+ kfree(evt);
+ }
+}
+
+void wmi_connect_worker(struct work_struct *work)
+{
+ int rc;
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ wmi_connect_worker);
+
+ if (wil->pending_connect_cid < 0) {
+ wil_err(wil, "No connection pending\n");
+ return;
+ }
+
+ wil_dbg_WMI(wil, "Configure for connection CID %d\n",
+ wil->pending_connect_cid);
+
+ rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE,
+ wil->pending_connect_cid, 0);
+ wil->pending_connect_cid = -1;
+ if (rc == 0)
+ wil_link_on(wil);
+}
--- /dev/null
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2006-2012 Wilocity .
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI) for the Wilocity
+ * MARLON 60 Gigabit wireless solution.
+ * It includes definitions of all the commands and events.
+ * Commands are messages from the host to the WM.
+ * Events are messages from the WM to the host.
+ */
+
+#ifndef __WILOCITY_WMI_H__
+#define __WILOCITY_WMI_H__
+
+/* General */
+
+#define WMI_MAC_LEN (6)
+#define WMI_PROX_RANGE_NUM (3)
+
+/* List of Commands */
+enum wmi_command_id {
+ WMI_CONNECT_CMDID = 0x0001,
+ WMI_DISCONNECT_CMDID = 0x0003,
+ WMI_START_SCAN_CMDID = 0x0007,
+ WMI_SET_BSS_FILTER_CMDID = 0x0009,
+ WMI_SET_PROBED_SSID_CMDID = 0x000a,
+ WMI_SET_LISTEN_INT_CMDID = 0x000b,
+ WMI_BCON_CTRL_CMDID = 0x000f,
+ WMI_ADD_CIPHER_KEY_CMDID = 0x0016,
+ WMI_DELETE_CIPHER_KEY_CMDID = 0x0017,
+ WMI_SET_APPIE_CMDID = 0x003f,
+ WMI_GET_APPIE_CMDID = 0x0040,
+ WMI_SET_WSC_STATUS_CMDID = 0x0041,
+ WMI_PXMT_RANGE_CFG_CMDID = 0x0042,
+ WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x0043,
+ WMI_FAST_MEM_ACC_MODE_CMDID = 0x0300,
+ WMI_MEM_READ_CMDID = 0x0800,
+ WMI_MEM_WR_CMDID = 0x0801,
+ WMI_ECHO_CMDID = 0x0803,
+ WMI_DEEP_ECHO_CMDID = 0x0804,
+ WMI_CONFIG_MAC_CMDID = 0x0805,
+ WMI_CONFIG_PHY_DEBUG_CMDID = 0x0806,
+ WMI_ADD_STATION_CMDID = 0x0807,
+ WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x0808,
+ WMI_PHY_GET_STATISTICS_CMDID = 0x0809,
+ WMI_FS_TUNE_CMDID = 0x080a,
+ WMI_CORR_MEASURE_CMDID = 0x080b,
+ WMI_TEMP_SENSE_CMDID = 0x080e,
+ WMI_DC_CALIB_CMDID = 0x080f,
+ WMI_SEND_TONE_CMDID = 0x0810,
+ WMI_IQ_TX_CALIB_CMDID = 0x0811,
+ WMI_IQ_RX_CALIB_CMDID = 0x0812,
+ WMI_SET_UCODE_IDLE_CMDID = 0x0813,
+ WMI_SET_WORK_MODE_CMDID = 0x0815,
+ WMI_LO_LEAKAGE_CALIB_CMDID = 0x0816,
+ WMI_MARLON_R_ACTIVATE_CMDID = 0x0817,
+ WMI_MARLON_R_READ_CMDID = 0x0818,
+ WMI_MARLON_R_WRITE_CMDID = 0x0819,
+ WMI_MARLON_R_TXRX_SEL_CMDID = 0x081a,
+ MAC_IO_STATIC_PARAMS_CMDID = 0x081b,
+ MAC_IO_DYNAMIC_PARAMS_CMDID = 0x081c,
+ WMI_SILENT_RSSI_CALIB_CMDID = 0x081d,
+ WMI_CFG_RX_CHAIN_CMDID = 0x0820,
+ WMI_VRING_CFG_CMDID = 0x0821,
+ WMI_RX_ON_CMDID = 0x0822,
+ WMI_VRING_BA_EN_CMDID = 0x0823,
+ WMI_VRING_BA_DIS_CMDID = 0x0824,
+ WMI_RCP_ADDBA_RESP_CMDID = 0x0825,
+ WMI_RCP_DELBA_CMDID = 0x0826,
+ WMI_SET_SSID_CMDID = 0x0827,
+ WMI_GET_SSID_CMDID = 0x0828,
+ WMI_SET_PCP_CHANNEL_CMDID = 0x0829,
+ WMI_GET_PCP_CHANNEL_CMDID = 0x082a,
+ WMI_SW_TX_REQ_CMDID = 0x082b,
+ WMI_RX_OFF_CMDID = 0x082c,
+ WMI_READ_MAC_RXQ_CMDID = 0x0830,
+ WMI_READ_MAC_TXQ_CMDID = 0x0831,
+ WMI_WRITE_MAC_RXQ_CMDID = 0x0832,
+ WMI_WRITE_MAC_TXQ_CMDID = 0x0833,
+ WMI_WRITE_MAC_XQ_FIELD_CMDID = 0x0834,
+ WMI_MLME_PUSH_CMDID = 0x0835,
+ WMI_BEAMFORMING_MGMT_CMDID = 0x0836,
+ WMI_BF_TXSS_MGMT_CMDID = 0x0837,
+ WMI_BF_SM_MGMT_CMDID = 0x0838,
+ WMI_BF_RXSS_MGMT_CMDID = 0x0839,
+ WMI_SET_SECTORS_CMDID = 0x0849,
+ WMI_MAINTAIN_PAUSE_CMDID = 0x0850,
+ WMI_MAINTAIN_RESUME_CMDID = 0x0851,
+ WMI_RS_MGMT_CMDID = 0x0852,
+ WMI_RF_MGMT_CMDID = 0x0853,
+ /* Performance monitoring commands */
+ WMI_BF_CTRL_CMDID = 0x0862,
+ WMI_NOTIFY_REQ_CMDID = 0x0863,
+ WMI_GET_STATUS_CMDID = 0x0864,
+ WMI_UNIT_TEST_CMDID = 0x0900,
+ WMI_HICCUP_CMDID = 0x0901,
+ WMI_FLASH_READ_CMDID = 0x0902,
+ WMI_FLASH_WRITE_CMDID = 0x0903,
+ WMI_SECURITY_UNIT_TEST_CMDID = 0x0904,
+
+ WMI_SET_MAC_ADDRESS_CMDID = 0xf003,
+ WMI_ABORT_SCAN_CMDID = 0xf007,
+ WMI_SET_PMK_CMDID = 0xf028,
+
+ WMI_SET_PROMISCUOUS_MODE_CMDID = 0xf041,
+ WMI_GET_PMK_CMDID = 0xf048,
+ WMI_SET_PASSPHRASE_CMDID = 0xf049,
+ WMI_SEND_ASSOC_RES_CMDID = 0xf04a,
+ WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xf04b,
+ WMI_EAPOL_TX_CMDID = 0xf04c,
+ WMI_MAC_ADDR_REQ_CMDID = 0xf04d,
+ WMI_FW_VER_CMDID = 0xf04e,
+};
+
+/*
+ * Commands data structures
+ */
+
+/*
+ * Frame Types
+ */
+enum wmi_mgmt_frame_type {
+ WMI_FRAME_BEACON = 0,
+ WMI_FRAME_PROBE_REQ = 1,
+ WMI_FRAME_PROBE_RESP = 2,
+ WMI_FRAME_ASSOC_REQ = 3,
+ WMI_FRAME_ASSOC_RESP = 4,
+ WMI_NUM_MGMT_FRAME,
+};
+
+/*
+ * WMI_CONNECT_CMDID
+ */
+enum wmi_network_type {
+ WMI_NETTYPE_INFRA = 0x01,
+ WMI_NETTYPE_ADHOC = 0x02,
+ WMI_NETTYPE_ADHOC_CREATOR = 0x04,
+ WMI_NETTYPE_AP = 0x10,
+ WMI_NETTYPE_P2P = 0x20,
+ WMI_NETTYPE_WBE = 0x40, /* PCIE over 60g */
+};
+
+enum wmi_dot11_auth_mode {
+ WMI_AUTH11_OPEN = 0x01,
+ WMI_AUTH11_SHARED = 0x02,
+ WMI_AUTH11_LEAP = 0x04,
+ WMI_AUTH11_WSC = 0x08,
+};
+
+enum wmi_auth_mode {
+ WMI_AUTH_NONE = 0x01,
+ WMI_AUTH_WPA = 0x02,
+ WMI_AUTH_WPA2 = 0x04,
+ WMI_AUTH_WPA_PSK = 0x08,
+ WMI_AUTH_WPA2_PSK = 0x10,
+ WMI_AUTH_WPA_CCKM = 0x20,
+ WMI_AUTH_WPA2_CCKM = 0x40,
+};
+
+enum wmi_crypto_type {
+ WMI_CRYPT_NONE = 0x01,
+ WMI_CRYPT_WEP = 0x02,
+ WMI_CRYPT_TKIP = 0x04,
+ WMI_CRYPT_AES = 0x08,
+ WMI_CRYPT_AES_GCMP = 0x20,
+};
+
+
+enum wmi_connect_ctrl_flag_bits {
+ WMI_CONNECT_ASSOC_POLICY_USER = 0x0001,
+ WMI_CONNECT_SEND_REASSOC = 0x0002,
+ WMI_CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+ WMI_CONNECT_PROFILE_MATCH_DONE = 0x0008,
+ WMI_CONNECT_IGNORE_AAC_BEACON = 0x0010,
+ WMI_CONNECT_CSA_FOLLOW_BSS = 0x0020,
+ WMI_CONNECT_DO_WPA_OFFLOAD = 0x0040,
+ WMI_CONNECT_DO_NOT_DEAUTH = 0x0080,
+};
+
+#define WMI_MAX_SSID_LEN (32)
+
+struct wmi_connect_cmd {
+ u8 network_type;
+ u8 dot11_auth_mode;
+ u8 auth_mode;
+ u8 pairwise_crypto_type;
+ u8 pairwise_crypto_len;
+ u8 group_crypto_type;
+ u8 group_crypto_len;
+ u8 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+ u8 channel;
+ u8 reserved0;
+ u8 bssid[WMI_MAC_LEN];
+ __le32 ctrl_flags;
+ u8 dst_mac[WMI_MAC_LEN];
+ u8 reserved1[2];
+} __packed;
+
+
+/*
+ * WMI_RECONNECT_CMDID
+ */
+struct wmi_reconnect_cmd {
+ u8 channel; /* hint */
+ u8 reserved;
+ u8 bssid[WMI_MAC_LEN]; /* mandatory if set */
+} __packed;
+
+
+/*
+ * WMI_SET_PMK_CMDID
+ */
+
+#define WMI_MIN_KEY_INDEX (0)
+#define WMI_MAX_KEY_INDEX (3)
+#define WMI_MAX_KEY_LEN (32)
+#define WMI_PASSPHRASE_LEN (64)
+#define WMI_PMK_LEN (32)
+
+struct wmi_set_pmk_cmd {
+ u8 pmk[WMI_PMK_LEN];
+} __packed;
+
+
+/*
+ * WMI_SET_PASSPHRASE_CMDID
+ */
+struct wmi_set_passphrase_cmd {
+ u8 ssid[WMI_MAX_SSID_LEN];
+ u8 passphrase[WMI_PASSPHRASE_LEN];
+ u8 ssid_len;
+ u8 passphrase_len;
+} __packed;
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+enum wmi_key_usage {
+ WMI_KEY_USE_PAIRWISE = 0,
+ WMI_KEY_USE_GROUP = 1,
+ WMI_KEY_USE_TX = 2, /* default Tx Key - Static WEP only */
+};
+
+struct wmi_add_cipher_key_cmd {
+ u8 key_index;
+ u8 key_type;
+ u8 key_usage; /* enum wmi_key_usage */
+ u8 key_len;
+ u8 key_rsc[8]; /* key replay sequence counter */
+ u8 key[WMI_MAX_KEY_LEN];
+ u8 key_op_ctrl; /* Additional Key Control information */
+ u8 mac[WMI_MAC_LEN];
+} __packed;
+
+/*
+ * WMI_DELETE_CIPHER_KEY_CMDID
+ */
+struct wmi_delete_cipher_key_cmd {
+ u8 key_index;
+ u8 mac[WMI_MAC_LEN];
+} __packed;
+
+
+/*
+ * WMI_START_SCAN_CMDID
+ *
+ * Start L1 scan operation
+ *
+ * Returned events:
+ * - WMI_RX_MGMT_PACKET_EVENTID - for every probe resp.
+ * - WMI_SCAN_COMPLETE_EVENTID
+ */
+enum wmi_scan_type {
+ WMI_LONG_SCAN = 0,
+ WMI_SHORT_SCAN = 1,
+};
+
+struct wmi_start_scan_cmd {
+ u8 reserved[8];
+ __le32 home_dwell_time; /* Max duration in the home channel(ms) */
+ __le32 force_scan_interval; /* Time interval between scans (ms)*/
+ u8 scan_type; /* wmi_scan_type */
+ u8 num_channels; /* how many channels follow */
+ struct {
+ u8 channel;
+ u8 reserved;
+ } channel_list[0]; /* channels ID's */
+ /* 0 - 58320 MHz */
+ /* 1 - 60480 MHz */
+ /* 2 - 62640 MHz */
+} __packed;
+
+/*
+ * WMI_SET_PROBED_SSID_CMDID
+ */
+#define MAX_PROBED_SSID_INDEX (15)
+
+enum wmi_ssid_flag {
+ WMI_SSID_FLAG_DISABLE = 0, /* disables entry */
+ WMI_SSID_FLAG_SPECIFIC = 1, /* probes specified ssid */
+ WMI_SSID_FLAG_ANY = 2, /* probes for any ssid */
+};
+
+struct wmi_probed_ssid_cmd {
+ u8 entry_index; /* 0 to MAX_PROBED_SSID_INDEX */
+ u8 flag; /* enum wmi_ssid_flag */
+ u8 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_SET_APPIE_CMDID
+ * Add Application specified IE to a management frame
+ */
+struct wmi_set_appie_cmd {
+ u8 mgmt_frm_type; /* enum wmi_mgmt_frame_type */
+ u8 reserved;
+ __le16 ie_len; /* Length of the IE to be added to MGMT frame */
+ u8 ie_info[0];
+} __packed;
+
+#define WMI_MAX_IE_LEN (1024)
+
+struct wmi_pxmt_range_cfg_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 range;
+} __packed;
+
+struct wmi_pxmt_snr2_range_cfg_cmd {
+ s8 snr2range_arr[WMI_PROX_RANGE_NUM-1];
+} __packed;
+
+/*
+ * WMI_RF_MGMT_CMDID
+ */
+enum wmi_rf_mgmt_type {
+ WMI_RF_MGMT_W_DISABLE = 0,
+ WMI_RF_MGMT_W_ENABLE = 1,
+ WMI_RF_MGMT_GET_STATUS = 2,
+};
+
+struct wmi_rf_mgmt_cmd {
+ __le32 rf_mgmt_type;
+} __packed;
+
+/*
+ * WMI_SET_SSID_CMDID
+ */
+struct wmi_set_ssid_cmd {
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_SET_PCP_CHANNEL_CMDID
+ */
+struct wmi_set_pcp_channel_cmd {
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_BCON_CTRL_CMDID
+ */
+struct wmi_bcon_ctrl_cmd {
+ __le16 bcon_interval;
+ __le16 frag_num;
+ __le64 ss_mask;
+ u8 network_type;
+ u8 reserved;
+ u8 disable_sec_offload;
+ u8 disable_sec;
+} __packed;
+
+/*
+ * WMI_SW_TX_REQ_CMDID
+ */
+struct wmi_sw_tx_req_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 len;
+ u8 payload[0];
+} __packed;
+
+/*
+ * WMI_VRING_CFG_CMDID
+ */
+
+struct wmi_sw_ring_cfg {
+ __le64 ring_mem_base;
+ __le16 ring_size;
+ __le16 max_mpdu_size;
+} __packed;
+
+struct wmi_vring_cfg_schd {
+ __le16 priority;
+ __le16 timeslot_us;
+} __packed;
+
+enum wmi_vring_cfg_encap_trans_type {
+ WMI_VRING_ENC_TYPE_802_3 = 0,
+ WMI_VRING_ENC_TYPE_NATIVE_WIFI = 1,
+};
+
+enum wmi_vring_cfg_ds_cfg {
+ WMI_VRING_DS_PBSS = 0,
+ WMI_VRING_DS_STATION = 1,
+ WMI_VRING_DS_AP = 2,
+ WMI_VRING_DS_ADDR4 = 3,
+};
+
+enum wmi_vring_cfg_nwifi_ds_trans_type {
+ WMI_NWIFI_TX_TRANS_MODE_NO = 0,
+ WMI_NWIFI_TX_TRANS_MODE_AP2PBSS = 1,
+ WMI_NWIFI_TX_TRANS_MODE_STA2PBSS = 2,
+};
+
+enum wmi_vring_cfg_schd_params_priority {
+ WMI_SCH_PRIO_REGULAR = 0,
+ WMI_SCH_PRIO_HIGH = 1,
+};
+
+struct wmi_vring_cfg {
+ struct wmi_sw_ring_cfg tx_sw_ring;
+ u8 ringid; /* 0-23 vrings */
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 encap_trans_type;
+ u8 ds_cfg; /* 802.3 DS cfg */
+ u8 nwifi_ds_trans_type;
+
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_POS (0)
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_LEN (1)
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_MSK (0x1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_POS (1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_LEN (1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_MSK (0x2)
+ u8 mac_ctrl;
+
+ #define VRING_CFG_TO_RESOLUTION_VALUE_POS (0)
+ #define VRING_CFG_TO_RESOLUTION_VALUE_LEN (6)
+ #define VRING_CFG_TO_RESOLUTION_VALUE_MSK (0x3F)
+ u8 to_resolution;
+ u8 agg_max_wsize;
+ struct wmi_vring_cfg_schd schd_params;
+} __packed;
+
+enum wmi_vring_cfg_cmd_action {
+ WMI_VRING_CMD_ADD = 0,
+ WMI_VRING_CMD_MODIFY = 1,
+ WMI_VRING_CMD_DELETE = 2,
+};
+
+struct wmi_vring_cfg_cmd {
+ __le32 action;
+ struct wmi_vring_cfg vring_cfg;
+} __packed;
+
+/*
+ * WMI_VRING_BA_EN_CMDID
+ */
+struct wmi_vring_ba_en_cmd {
+ u8 ringid;
+ u8 agg_max_wsize;
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_VRING_BA_DIS_CMDID
+ */
+struct wmi_vring_ba_dis_cmd {
+ u8 ringid;
+ u8 reserved;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_NOTIFY_REQ_CMDID
+ */
+struct wmi_notify_req_cmd {
+ u8 cid;
+ u8 reserved[3];
+ __le32 interval_usec;
+} __packed;
+
+/*
+ * WMI_CFG_RX_CHAIN_CMDID
+ */
+enum wmi_sniffer_cfg_mode {
+ WMI_SNIFFER_OFF = 0,
+ WMI_SNIFFER_ON = 1,
+};
+
+enum wmi_sniffer_cfg_phy_info_mode {
+ WMI_SNIFFER_PHY_INFO_DISABLED = 0,
+ WMI_SNIFFER_PHY_INFO_ENABLED = 1,
+};
+
+enum wmi_sniffer_cfg_phy_support {
+ WMI_SNIFFER_CP = 0,
+ WMI_SNIFFER_DP = 1,
+ WMI_SNIFFER_BOTH_PHYS = 2,
+};
+
+struct wmi_sniffer_cfg {
+ __le32 mode; /* enum wmi_sniffer_cfg_mode */
+ __le32 phy_info_mode; /* enum wmi_sniffer_cfg_phy_info_mode */
+ __le32 phy_support; /* enum wmi_sniffer_cfg_phy_support */
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+enum wmi_cfg_rx_chain_cmd_action {
+ WMI_RX_CHAIN_ADD = 0,
+ WMI_RX_CHAIN_DEL = 1,
+};
+
+enum wmi_cfg_rx_chain_cmd_decap_trans_type {
+ WMI_DECAP_TYPE_802_3 = 0,
+ WMI_DECAP_TYPE_NATIVE_WIFI = 1,
+};
+
+enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type {
+ WMI_NWIFI_RX_TRANS_MODE_NO = 0,
+ WMI_NWIFI_RX_TRANS_MODE_PBSS2AP = 1,
+ WMI_NWIFI_RX_TRANS_MODE_PBSS2STA = 2,
+};
+
+struct wmi_cfg_rx_chain_cmd {
+ __le32 action;
+ struct wmi_sw_ring_cfg rx_sw_ring;
+ u8 mid;
+ u8 decap_trans_type;
+
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_POS (0)
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_LEN (1)
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_MSK (0x1)
+ u8 l2_802_3_offload_ctrl;
+
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_POS (0)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_LEN (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_MSK (0x1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_POS (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_LEN (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_MSK (0x2)
+ u8 l2_nwifi_offload_ctrl;
+
+ u8 vlan_id;
+ u8 nwifi_ds_trans_type;
+
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_POS (0)
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_LEN (1)
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_MSK (0x1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS (1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_LEN (1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_MSK (0x2)
+ u8 l3_l4_ctrl;
+
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_POS (0)
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_MSK (0x1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_POS (1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_MSK (0x2)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_POS (2)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_MSK (0x4)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_POS (3)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_MSK (0x8)
+ u8 ring_ctrl;
+
+ __le16 prefetch_thrsh;
+ __le16 wb_thrsh;
+ __le32 itr_value;
+ __le16 host_thrsh;
+ u8 reserved[2];
+ struct wmi_sniffer_cfg sniffer_cfg;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_RESP_CMDID
+ */
+struct wmi_rcp_addba_resp_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ __le16 status_code;
+ __le16 ba_param_set; /* ieee80211_ba_parameterset field to send */
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_RCP_DELBA_CMDID
+ */
+struct wmi_rcp_delba_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 reserved;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_REQ_CMDID
+ */
+struct wmi_rcp_addba_req_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ /* ieee80211_ba_parameterset field as it received */
+ __le16 ba_param_set;
+ __le16 ba_timeout;
+ /* ieee80211_ba_seqstrl field as it received */
+ __le16 ba_seq_ctrl;
+} __packed;
+
+/*
+ * WMI_SET_MAC_ADDRESS_CMDID
+ */
+struct wmi_set_mac_address_cmd {
+ u8 mac[WMI_MAC_LEN];
+ u8 reserved[2];
+} __packed;
+
+
+/*
+* WMI_EAPOL_TX_CMDID
+*/
+struct wmi_eapol_tx_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 eapol_len;
+ u8 eapol[0];
+} __packed;
+
+/*
+ * WMI_ECHO_CMDID
+ *
+ * Check FW is alive
+ *
+ * WMI_DEEP_ECHO_CMDID
+ *
+ * Check FW and ucode are alive
+ *
+ * Returned event: WMI_ECHO_RSP_EVENTID
+ * same event for both commands
+ */
+struct wmi_echo_cmd {
+ __le32 value;
+} __packed;
+
+/*
+ * WMI Events
+ */
+
+/*
+ * List of Events (target to host)
+ */
+enum wmi_event_id {
+ WMI_IMM_RSP_EVENTID = 0x0000,
+ WMI_READY_EVENTID = 0x1001,
+ WMI_CONNECT_EVENTID = 0x1002,
+ WMI_DISCONNECT_EVENTID = 0x1003,
+ WMI_SCAN_COMPLETE_EVENTID = 0x100a,
+ WMI_REPORT_STATISTICS_EVENTID = 0x100b,
+ WMI_RD_MEM_RSP_EVENTID = 0x1800,
+ WMI_FW_READY_EVENTID = 0x1801,
+ WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x0200,
+ WMI_ECHO_RSP_EVENTID = 0x1803,
+ WMI_CONFIG_MAC_DONE_EVENTID = 0x1805,
+ WMI_CONFIG_PHY_DEBUG_DONE_EVENTID = 0x1806,
+ WMI_ADD_STATION_DONE_EVENTID = 0x1807,
+ WMI_ADD_DEBUG_TX_PCKT_DONE_EVENTID = 0x1808,
+ WMI_PHY_GET_STATISTICS_EVENTID = 0x1809,
+ WMI_FS_TUNE_DONE_EVENTID = 0x180a,
+ WMI_CORR_MEASURE_DONE_EVENTID = 0x180b,
+ WMI_TEMP_SENSE_DONE_EVENTID = 0x180e,
+ WMI_DC_CALIB_DONE_EVENTID = 0x180f,
+ WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
+ WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
+ WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
+ WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
+ WMI_MARLON_R_ACTIVATE_DONE_EVENTID = 0x1817,
+ WMI_MARLON_R_READ_DONE_EVENTID = 0x1818,
+ WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
+ WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181a,
+ WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181d,
+
+ WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
+ WMI_VRING_CFG_DONE_EVENTID = 0x1821,
+ WMI_RX_ON_DONE_EVENTID = 0x1822,
+ WMI_BA_STATUS_EVENTID = 0x1823,
+ WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
+ WMI_ADDBA_RESP_SENT_EVENTID = 0x1825,
+ WMI_DELBA_EVENTID = 0x1826,
+ WMI_GET_SSID_EVENTID = 0x1828,
+ WMI_GET_PCP_CHANNEL_EVENTID = 0x182a,
+ WMI_SW_TX_COMPLETE_EVENTID = 0x182b,
+ WMI_RX_OFF_DONE_EVENTID = 0x182c,
+
+ WMI_READ_MAC_RXQ_EVENTID = 0x1830,
+ WMI_READ_MAC_TXQ_EVENTID = 0x1831,
+ WMI_WRITE_MAC_RXQ_EVENTID = 0x1832,
+ WMI_WRITE_MAC_TXQ_EVENTID = 0x1833,
+ WMI_WRITE_MAC_XQ_FIELD_EVENTID = 0x1834,
+
+ WMI_BEAFORMING_MGMT_DONE_EVENTID = 0x1836,
+ WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
+ WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
+ WMI_RS_MGMT_DONE_EVENTID = 0x1852,
+ WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
+ WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
+ WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
+
+ /* Performance monitoring events */
+ WMI_DATA_PORT_OPEN_EVENTID = 0x1860,
+ WMI_WBE_LINKDOWN_EVENTID = 0x1861,
+
+ WMI_BF_CTRL_DONE_EVENTID = 0x1862,
+ WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
+ WMI_GET_STATUS_DONE_EVENTID = 0x1864,
+
+ WMI_UNIT_TEST_EVENTID = 0x1900,
+ WMI_FLASH_READ_DONE_EVENTID = 0x1902,
+ WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
+
+ WMI_SET_CHANNEL_EVENTID = 0x9000,
+ WMI_ASSOC_REQ_EVENTID = 0x9001,
+ WMI_EAPOL_RX_EVENTID = 0x9002,
+ WMI_MAC_ADDR_RESP_EVENTID = 0x9003,
+ WMI_FW_VER_EVENTID = 0x9004,
+};
+
+/*
+ * Events data structures
+ */
+
+/*
+ * WMI_RF_MGMT_STATUS_EVENTID
+ */
+enum wmi_rf_status {
+ WMI_RF_ENABLED = 0,
+ WMI_RF_DISABLED_HW = 1,
+ WMI_RF_DISABLED_SW = 2,
+ WMI_RF_DISABLED_HW_SW = 3,
+};
+
+struct wmi_rf_mgmt_status_event {
+ __le32 rf_status;
+} __packed;
+
+/*
+ * WMI_GET_STATUS_DONE_EVENTID
+ */
+struct wmi_get_status_done_event {
+ __le32 is_associated;
+ u8 cid;
+ u8 reserved0[3];
+ u8 bssid[WMI_MAC_LEN];
+ u8 channel;
+ u8 reserved1;
+ u8 network_type;
+ u8 reserved2[3];
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+ __le32 rf_status;
+ __le32 is_secured;
+} __packed;
+
+/*
+ * WMI_FW_VER_EVENTID
+ */
+struct wmi_fw_ver_event {
+ u8 major;
+ u8 minor;
+ __le16 subminor;
+ __le16 build;
+} __packed;
+
+/*
+* WMI_MAC_ADDR_RESP_EVENTID
+*/
+struct wmi_mac_addr_resp_event {
+ u8 mac[WMI_MAC_LEN];
+ u8 auth_mode;
+ u8 crypt_mode;
+ __le32 offload_mode;
+} __packed;
+
+/*
+* WMI_EAPOL_RX_EVENTID
+*/
+struct wmi_eapol_rx_event {
+ u8 src_mac[WMI_MAC_LEN];
+ __le16 eapol_len;
+ u8 eapol[0];
+} __packed;
+
+/*
+* WMI_READY_EVENTID
+*/
+enum wmi_phy_capability {
+ WMI_11A_CAPABILITY = 1,
+ WMI_11G_CAPABILITY = 2,
+ WMI_11AG_CAPABILITY = 3,
+ WMI_11NA_CAPABILITY = 4,
+ WMI_11NG_CAPABILITY = 5,
+ WMI_11NAG_CAPABILITY = 6,
+ WMI_11AD_CAPABILITY = 7,
+ WMI_11N_CAPABILITY_OFFSET = WMI_11NA_CAPABILITY - WMI_11A_CAPABILITY,
+};
+
+struct wmi_ready_event {
+ __le32 sw_version;
+ __le32 abi_version;
+ u8 mac[WMI_MAC_LEN];
+ u8 phy_capability; /* enum wmi_phy_capability */
+ u8 reserved;
+} __packed;
+
+/*
+ * WMI_NOTIFY_REQ_DONE_EVENTID
+ */
+struct wmi_notify_req_done_event {
+ __le32 status;
+ __le64 tsf;
+ __le32 snr_val;
+ __le32 tx_tpt;
+ __le32 tx_goodput;
+ __le32 rx_goodput;
+ __le16 bf_mcs;
+ __le16 my_rx_sector;
+ __le16 my_tx_sector;
+ __le16 other_rx_sector;
+ __le16 other_tx_sector;
+ __le16 range;
+} __packed;
+
+/*
+ * WMI_CONNECT_EVENTID
+ */
+struct wmi_connect_event {
+ u8 channel;
+ u8 reserved0;
+ u8 bssid[WMI_MAC_LEN];
+ __le16 listen_interval;
+ __le16 beacon_interval;
+ u8 network_type;
+ u8 reserved1[3];
+ u8 beacon_ie_len;
+ u8 assoc_req_len;
+ u8 assoc_resp_len;
+ u8 cid;
+ u8 reserved2[3];
+ u8 assoc_info[0];
+} __packed;
+
+/*
+ * WMI_DISCONNECT_EVENTID
+ */
+enum wmi_disconnect_reason {
+ WMI_DIS_REASON_NO_NETWORK_AVAIL = 1,
+ WMI_DIS_REASON_LOST_LINK = 2, /* bmiss */
+ WMI_DIS_REASON_DISCONNECT_CMD = 3,
+ WMI_DIS_REASON_BSS_DISCONNECTED = 4,
+ WMI_DIS_REASON_AUTH_FAILED = 5,
+ WMI_DIS_REASON_ASSOC_FAILED = 6,
+ WMI_DIS_REASON_NO_RESOURCES_AVAIL = 7,
+ WMI_DIS_REASON_CSERV_DISCONNECT = 8,
+ WMI_DIS_REASON_INVALID_PROFILE = 10,
+ WMI_DIS_REASON_DOT11H_CHANNEL_SWITCH = 11,
+ WMI_DIS_REASON_PROFILE_MISMATCH = 12,
+ WMI_DIS_REASON_CONNECTION_EVICTED = 13,
+ WMI_DIS_REASON_IBSS_MERGE = 14,
+};
+
+struct wmi_disconnect_event {
+ __le16 protocol_reason_status; /* reason code, see 802.11 spec. */
+ u8 bssid[WMI_MAC_LEN]; /* set if known */
+ u8 disconnect_reason; /* see wmi_disconnect_reason_e */
+ u8 assoc_resp_len;
+ u8 assoc_info[0];
+} __packed;
+
+/*
+ * WMI_SCAN_COMPLETE_EVENTID
+ */
+struct wmi_scan_complete_event {
+ __le32 status;
+} __packed;
+
+/*
+ * WMI_BA_STATUS_EVENTID
+ */
+enum wmi_vring_ba_status {
+ WMI_BA_AGREED = 0,
+ WMI_BA_NON_AGREED = 1,
+};
+
+struct wmi_vring_ba_status_event {
+ __le16 status;
+ u8 reserved[2];
+ u8 ringid;
+ u8 agg_wsize;
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_DELBA_EVENTID
+ */
+struct wmi_delba_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 from_initiator;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_VRING_CFG_DONE_EVENTID
+ */
+enum wmi_vring_cfg_done_event_status {
+ WMI_VRING_CFG_SUCCESS = 0,
+ WMI_VRING_CFG_FAILURE = 1,
+};
+
+struct wmi_vring_cfg_done_event {
+ u8 ringid;
+ u8 status;
+ u8 reserved[2];
+ __le32 tx_vring_tail_ptr;
+} __packed;
+
+/*
+ * WMI_ADDBA_RESP_SENT_EVENTID
+ */
+enum wmi_rcp_addba_resp_sent_event_status {
+ WMI_ADDBA_SUCCESS = 0,
+ WMI_ADDBA_FAIL = 1,
+};
+
+struct wmi_rcp_addba_resp_sent_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 reserved;
+ __le16 status;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_REQ_EVENTID
+ */
+struct wmi_rcp_addba_req_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ __le16 ba_param_set; /* ieee80211_ba_parameterset as it received */
+ __le16 ba_timeout;
+ __le16 ba_seq_ctrl; /* ieee80211_ba_seqstrl field as it received */
+} __packed;
+
+/*
+ * WMI_CFG_RX_CHAIN_DONE_EVENTID
+ */
+enum wmi_cfg_rx_chain_done_event_status {
+ WMI_CFG_RX_CHAIN_SUCCESS = 1,
+};
+
+struct wmi_cfg_rx_chain_done_event {
+ __le32 rx_ring_tail_ptr; /* Rx V-Ring Tail pointer */
+ __le32 status;
+} __packed;
+
+/*
+ * WMI_WBE_LINKDOWN_EVENTID
+ */
+enum wmi_wbe_link_down_event_reason {
+ WMI_WBE_REASON_USER_REQUEST = 0,
+ WMI_WBE_REASON_RX_DISASSOC = 1,
+ WMI_WBE_REASON_BAD_PHY_LINK = 2,
+};
+
+struct wmi_wbe_link_down_event {
+ u8 cid;
+ u8 reserved[3];
+ __le32 reason;
+} __packed;
+
+/*
+ * WMI_DATA_PORT_OPEN_EVENTID
+ */
+struct wmi_data_port_open_event {
+ u8 cid;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_GET_PCP_CHANNEL_EVENTID
+ */
+struct wmi_get_pcp_channel_event {
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_SW_TX_COMPLETE_EVENTID
+ */
+enum wmi_sw_tx_status {
+ WMI_TX_SW_STATUS_SUCCESS = 0,
+ WMI_TX_SW_STATUS_FAILED_NO_RESOURCES = 1,
+ WMI_TX_SW_STATUS_FAILED_TX = 2,
+};
+
+struct wmi_sw_tx_complete_event {
+ u8 status; /* enum wmi_sw_tx_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_GET_SSID_EVENTID
+ */
+struct wmi_get_ssid_event {
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_RX_MGMT_PACKET_EVENTID
+ */
+struct wmi_rx_mgmt_info {
+ u8 mcs;
+ s8 snr;
+ __le16 range;
+ __le16 stype;
+ __le16 status;
+ __le32 len;
+ u8 qid;
+ u8 mid;
+ u8 cid;
+ u8 channel; /* From Radio MNGR */
+} __packed;
+
+struct wmi_rx_mgmt_packet_event {
+ struct wmi_rx_mgmt_info info;
+ u8 payload[0];
+} __packed;
+
+/*
+ * WMI_ECHO_RSP_EVENTID
+ */
+struct wmi_echo_event {
+ __le32 echoed_value;
+} __packed;
+
+#endif /* __WILOCITY_WMI_H__ */
#include <linux/hw_random.h>
#include <linux/bcma/bcma.h>
#include <linux/ssb/ssb.h>
+#include <linux/completion.h>
#include <net/mac80211.h>
#include "debugfs.h"
struct b43_request_fw_context {
/* The device we are requesting the fw for. */
struct b43_wldev *dev;
+ /* a completion event structure needed if this call is asynchronous */
+ struct completion fw_load_complete;
+ /* a pointer to the firmware object */
+ const struct firmware *blob;
/* The type of firmware to request. */
enum b43_firmware_file_type req_type;
/* Error messages for each firmware type. */
b43warn(wl, text);
}
+static void b43_fw_cb(const struct firmware *firmware, void *context)
+{
+ struct b43_request_fw_context *ctx = context;
+
+ ctx->blob = firmware;
+ complete(&ctx->fw_load_complete);
+}
+
int b43_do_request_fw(struct b43_request_fw_context *ctx,
const char *name,
- struct b43_firmware_file *fw)
+ struct b43_firmware_file *fw, bool async)
{
- const struct firmware *blob;
struct b43_fw_header *hdr;
u32 size;
int err;
B43_WARN_ON(1);
return -ENOSYS;
}
- err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev);
+ if (async) {
+ /* do this part asynchronously */
+ init_completion(&ctx->fw_load_complete);
+ err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname,
+ ctx->dev->dev->dev, GFP_KERNEL,
+ ctx, b43_fw_cb);
+ if (err < 0) {
+ pr_err("Unable to load firmware\n");
+ return err;
+ }
+ /* stall here until fw ready */
+ wait_for_completion(&ctx->fw_load_complete);
+ if (ctx->blob)
+ goto fw_ready;
+ /* On some ARM systems, the async request will fail, but the next sync
+ * request works. For this reason, we dall through here
+ */
+ }
+ err = request_firmware(&ctx->blob, ctx->fwname,
+ ctx->dev->dev->dev);
if (err == -ENOENT) {
snprintf(ctx->errors[ctx->req_type],
sizeof(ctx->errors[ctx->req_type]),
- "Firmware file \"%s\" not found\n", ctx->fwname);
+ "Firmware file \"%s\" not found\n",
+ ctx->fwname);
return err;
} else if (err) {
snprintf(ctx->errors[ctx->req_type],
ctx->fwname, err);
return err;
}
- if (blob->size < sizeof(struct b43_fw_header))
+fw_ready:
+ if (ctx->blob->size < sizeof(struct b43_fw_header))
goto err_format;
- hdr = (struct b43_fw_header *)(blob->data);
+ hdr = (struct b43_fw_header *)(ctx->blob->data);
switch (hdr->type) {
case B43_FW_TYPE_UCODE:
case B43_FW_TYPE_PCM:
size = be32_to_cpu(hdr->size);
- if (size != blob->size - sizeof(struct b43_fw_header))
+ if (size != ctx->blob->size - sizeof(struct b43_fw_header))
goto err_format;
/* fallthrough */
case B43_FW_TYPE_IV:
goto err_format;
}
- fw->data = blob;
+ fw->data = ctx->blob;
fw->filename = name;
fw->type = ctx->req_type;
snprintf(ctx->errors[ctx->req_type],
sizeof(ctx->errors[ctx->req_type]),
"Firmware file \"%s\" format error.\n", ctx->fwname);
- release_firmware(blob);
+ release_firmware(ctx->blob);
return -EPROTO;
}
goto err_no_ucode;
}
}
- err = b43_do_request_fw(ctx, filename, &fw->ucode);
+ err = b43_do_request_fw(ctx, filename, &fw->ucode, true);
if (err)
goto err_load;
else
goto err_no_pcm;
fw->pcm_request_failed = false;
- err = b43_do_request_fw(ctx, filename, &fw->pcm);
+ err = b43_do_request_fw(ctx, filename, &fw->pcm, false);
if (err == -ENOENT) {
/* We did not find a PCM file? Not fatal, but
* core rev <= 10 must do without hwcrypto then. */
default:
goto err_no_initvals;
}
- err = b43_do_request_fw(ctx, filename, &fw->initvals);
+ err = b43_do_request_fw(ctx, filename, &fw->initvals, false);
if (err)
goto err_load;
default:
goto err_no_initvals;
}
- err = b43_do_request_fw(ctx, filename, &fw->initvals_band);
+ err = b43_do_request_fw(ctx, filename, &fw->initvals_band, false);
if (err)
goto err_load;
struct b43_request_fw_context;
-int b43_do_request_fw(struct b43_request_fw_context *ctx,
- const char *name,
- struct b43_firmware_file *fw);
+int b43_do_request_fw(struct b43_request_fw_context *ctx, const char *name,
+ struct b43_firmware_file *fw, bool async);
void b43_do_release_fw(struct b43_firmware_file *fw);
#endif /* B43_MAIN_H_ */
if (count) {
char *p = buffer;
- strncpy(buffer, buf, min(sizeof(buffer), count));
+ strlcpy(buffer, buf, sizeof(buffer));
channel = simple_strtoul(p, NULL, 0);
if (channel)
params.channel = channel;
next_reclaimed = ssn;
}
- if (tid != IWL_TID_NON_QOS) {
- priv->tid_data[sta_id][tid].next_reclaimed =
- next_reclaimed;
- IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
- next_reclaimed);
- }
-
iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs);
iwlagn_check_ratid_empty(priv, sta_id, tid);
if (!is_agg)
iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1);
+ /*
+ * W/A for FW bug - the seq_ctl isn't updated when the
+ * queues are flushed. Fetch it from the packet itself
+ */
+ if (!is_agg && status == TX_STATUS_FAIL_FIFO_FLUSHED) {
+ next_reclaimed = le16_to_cpu(hdr->seq_ctrl);
+ next_reclaimed =
+ SEQ_TO_SN(next_reclaimed + 0x10);
+ }
+
is_offchannel_skb =
(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN);
freed++;
}
+ if (tid != IWL_TID_NON_QOS) {
+ priv->tid_data[sta_id][tid].next_reclaimed =
+ next_reclaimed;
+ IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
+ next_reclaimed);
+ }
+
WARN_ON(!is_agg && freed != 1);
/*
else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) &&
!trans_pcie->inta)
iwl_enable_interrupts(trans);
+ return IRQ_HANDLED;
none:
/* re-enable interrupts here since we don't have anything to service. */
NL80211_CHAN_NO_HT)
config_bands |= BAND_GN;
} else {
- if (cfg80211_get_chandef_type(¶ms->chandef) !=
+ if (cfg80211_get_chandef_type(¶ms->chandef) ==
NL80211_CHAN_NO_HT)
config_bands = BAND_A;
else
*/
int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
{
- bool cancel_flag = false;
int status;
struct cmd_ctrl_node *cmd_queued;
atomic_inc(&adapter->cmd_pending);
/* Wait for completion */
- wait_event_interruptible(adapter->cmd_wait_q.wait,
- *(cmd_queued->condition));
- if (!*(cmd_queued->condition))
- cancel_flag = true;
-
- if (cancel_flag) {
- mwifiex_cancel_pending_ioctl(adapter);
- dev_dbg(adapter->dev, "cmd cancel\n");
+ status = wait_event_interruptible(adapter->cmd_wait_q.wait,
+ *(cmd_queued->condition));
+ if (status) {
+ dev_err(adapter->dev, "cmd_wait_q terminated: %d\n", status);
+ return status;
}
status = adapter->cmd_wait_q.status;
return false;
}
- wait_event_interruptible(adapter->hs_activate_wait_q,
- adapter->hs_activate_wait_q_woken);
+ if (wait_event_interruptible(adapter->hs_activate_wait_q,
+ adapter->hs_activate_wait_q_woken)) {
+ dev_err(adapter->dev, "hs_activate_wait_q terminated\n");
+ return false;
+ }
return true;
}
p->amsdu_enabled = 0;
rc = mwl8k_post_cmd(hw, &cmd->header);
+ if (!rc)
+ rc = p->station_id;
kfree(cmd);
- return rc ? rc : p->station_id;
+ return rc;
}
static int mwl8k_cmd_update_stadb_del(struct ieee80211_hw *hw,
if (!(is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) {
rtl92c_phy_sw_chnl_callback(hw);
RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
- "sw_chnl_inprogress false schdule workitem\n");
+ "sw_chnl_inprogress false schedule workitem\n");
rtlphy->sw_chnl_inprogress = false;
} else {
RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
if (!(is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) {
rtl8723ae_phy_sw_chnl_callback(hw);
RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
- "sw_chnl_inprogress false schdule workitem\n");
+ "sw_chnl_inprogress false schedule workitem\n");
rtlphy->sw_chnl_inprogress = false;
} else {
RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
struct regulator_dev *rdev = regulator->rdev;
if (rdev->constraints &&
- rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE &&
- (rdev->desc->n_voltages - rdev->desc->linear_min_sel) > 1)
- return 1;
+ (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
+ return 1;
+
+ if (rdev->desc->continuous_voltage_range &&
+ rdev->constraints->min_uV && rdev->constraints->max_uV &&
+ rdev->constraints->min_uV != rdev->constraints->max_uV)
+ return 1;
+ }
return 0;
}
* @config: runtime configuration for regulator
*
* Called by regulator drivers to register a regulator.
- * Returns 0 on success.
+ * Returns a valid pointer to struct regulator_dev on success
+ * or an ERR_PTR() on error.
*/
struct regulator_dev *
regulator_register(const struct regulator_desc *regulator_desc,
int step;
};
-/* Voltage maps in mV */
+/* Voltage maps in uV */
static const struct voltage_map_desc ldo_voltage_map_desc = {
- .min = 800, .max = 3950, .step = 50,
+ .min = 800000, .max = 3950000, .step = 50000,
}; /* LDO1 ~ 18, 21 all */
static const struct voltage_map_desc buck1245_voltage_map_desc = {
- .min = 650, .max = 2225, .step = 25,
+ .min = 650000, .max = 2225000, .step = 25000,
}; /* Buck1, 2, 4, 5 */
static const struct voltage_map_desc buck37_voltage_map_desc = {
- .min = 750, .max = 3900, .step = 50,
+ .min = 750000, .max = 3900000, .step = 50000,
}; /* Buck3, 7 */
-/* current map in mA */
+/* current map in uA */
static const struct voltage_map_desc charger_current_map_desc = {
- .min = 200, .max = 950, .step = 50,
+ .min = 200000, .max = 950000, .step = 50000,
};
static const struct voltage_map_desc topoff_current_map_desc = {
- .min = 50, .max = 200, .step = 10,
+ .min = 50000, .max = 200000, .step = 10000,
};
static const struct voltage_map_desc *reg_voltage_map[] = {
if (val > desc->max)
return -EINVAL;
- return val * 1000;
+ return val;
}
static int max8997_get_enable_register(struct regulator_dev *rdev,
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int i, reg, shift, mask, ret;
desc = reg_voltage_map[rid];
- i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (i < 0)
return i;
case MAX8997_BUCK4:
case MAX8997_BUCK5:
return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
- max8997->ramp_delay);
+ max8997->ramp_delay * 1000);
}
return 0;
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
bool gpio_dvs_mode = false;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
return -EINVAL;
selector);
desc = reg_voltage_map[rid];
- new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (new_val < 0)
return new_val;
max8997->buck1_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck1_voltage[i] / 1000,
- pdata->buck1_voltage[i] / 1000 +
+ pdata->buck1_voltage[i],
+ pdata->buck1_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck2_voltage[i] / 1000,
- pdata->buck2_voltage[i] / 1000 +
+ pdata->buck2_voltage[i],
+ pdata->buck2_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck5_voltage[i] / 1000,
- pdata->buck5_voltage[i] / 1000 +
+ pdata->buck5_voltage[i],
+ pdata->buck5_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
int step;
};
-/* Voltage maps */
+/* Voltage maps in uV*/
static const struct voltage_map_desc ldo23_voltage_map_desc = {
- .min = 800, .step = 50, .max = 1300,
+ .min = 800000, .step = 50000, .max = 1300000,
};
static const struct voltage_map_desc ldo456711_voltage_map_desc = {
- .min = 1600, .step = 100, .max = 3600,
+ .min = 1600000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc ldo8_voltage_map_desc = {
- .min = 3000, .step = 100, .max = 3600,
+ .min = 3000000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc ldo9_voltage_map_desc = {
- .min = 2800, .step = 100, .max = 3100,
+ .min = 2800000, .step = 100000, .max = 3100000,
};
static const struct voltage_map_desc ldo10_voltage_map_desc = {
- .min = 950, .step = 50, .max = 1300,
+ .min = 95000, .step = 50000, .max = 1300000,
};
static const struct voltage_map_desc ldo1213_voltage_map_desc = {
- .min = 800, .step = 100, .max = 3300,
+ .min = 800000, .step = 100000, .max = 3300000,
};
static const struct voltage_map_desc ldo1415_voltage_map_desc = {
- .min = 1200, .step = 100, .max = 3300,
+ .min = 1200000, .step = 100000, .max = 3300000,
};
static const struct voltage_map_desc ldo1617_voltage_map_desc = {
- .min = 1600, .step = 100, .max = 3600,
+ .min = 1600000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc buck12_voltage_map_desc = {
- .min = 750, .step = 25, .max = 1525,
+ .min = 750000, .step = 25000, .max = 1525000,
};
static const struct voltage_map_desc buck3_voltage_map_desc = {
- .min = 1600, .step = 100, .max = 3600,
+ .min = 1600000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc buck4_voltage_map_desc = {
- .min = 800, .step = 100, .max = 2300,
+ .min = 800000, .step = 100000, .max = 2300000,
};
static const struct voltage_map_desc *ldo_voltage_map[] = {
if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
return 0;
- difference = (new_selector - old_selector) * desc->step;
+ difference = (new_selector - old_selector) * desc->step / 1000;
if (difference > 0)
- return difference / ((val & 0x0f) + 1);
+ return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
return 0;
}
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage1 / 1000))
+ < pdata->buck1_voltage1)
i++;
max8998->buck1_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage2 / 1000))
+ < pdata->buck1_voltage2)
i++;
max8998->buck1_vol[1] = i;
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage3 / 1000))
+ < pdata->buck1_voltage3)
i++;
max8998->buck1_vol[2] = i;
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage4 / 1000))
+ < pdata->buck1_voltage4)
i++;
max8998->buck1_vol[3] = i;
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck2_voltage1 / 1000))
+ < pdata->buck2_voltage1)
i++;
max8998->buck2_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck2_voltage2 / 1000))
+ < pdata->buck2_voltage2)
i++;
max8998->buck2_vol[1] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
int count = (desc->max - desc->min) / desc->step + 1;
regulators[index].n_voltages = count;
- regulators[index].min_uV = desc->min * 1000;
- regulators[index].uV_step = desc->step * 1000;
+ regulators[index].min_uV = desc->min;
+ regulators[index].uV_step = desc->step;
}
config.dev = max8998->dev;
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
- u8 val;
+ unsigned int val;
ret = s5m8767_get_register(rdev, ®, &enable_ctrl);
if (ret == -EINVAL)
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int reg, mask, ret;
int reg_id = rdev_get_id(rdev);
- u8 val;
+ unsigned int val;
ret = s5m8767_get_voltage_register(rdev, ®);
if (ret)
u8 ccdf[PAGE_SIZE - 24 - 56]; /* content-code dependent field */
} __packed;
-#define CHSC_SEI_NT0 0ULL
+#define CHSC_SEI_NT0 (1ULL << 63)
#define CHSC_SEI_NT2 (1ULL << 61)
struct chsc_sei {
u32 reserved1;
u64 ntsm; /* notification type mask */
struct chsc_header response;
- u32 reserved2;
+ u32 :24;
+ u8 nt;
union {
struct chsc_sei_nt0_area nt0_area;
struct chsc_sei_nt2_area nt2_area;
css_schedule_eval_all();
}
- switch (sei->ntsm) {
- case CHSC_SEI_NT0:
+ switch (sei->nt) {
+ case 0:
chsc_process_sei_nt0(&sei->u.nt0_area);
- return 1;
- case CHSC_SEI_NT2:
+ break;
+ case 2:
chsc_process_sei_nt2(&sei->u.nt2_area);
- return 1;
+ break;
default:
- CIO_CRW_EVENT(2, "chsc: unhandled nt (nt=%08Lx)\n",
- sei->ntsm);
- return 0;
+ CIO_CRW_EVENT(2, "chsc: unhandled nt=%d\n",
+ sei->nt);
+ break;
}
} else {
CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x)\n",
sei = sei_page;
CIO_TRACE_EVENT(2, "prcss");
-
- /*
- * The ntsm does not allow to select NT0 and NT2 together. We need to
- * first check for NT2, than additionally for NT0...
- */
-#ifdef CONFIG_PCI
- if (!__chsc_process_crw(sei, CHSC_SEI_NT2))
-#endif
- __chsc_process_crw(sei, CHSC_SEI_NT0);
+ __chsc_process_crw(sei, CHSC_SEI_NT0 | CHSC_SEI_NT2);
}
void chsc_chp_online(struct chp_id chpid)
static int sh_clk_div_enable(struct clk *clk)
{
+ if (clk->div_mask == SH_CLK_DIV6_MSK) {
+ int ret = sh_clk_div_set_rate(clk, clk->rate);
+ if (ret < 0)
+ return ret;
+ }
+
sh_clk_write(sh_clk_read(clk) & ~CPG_CKSTP_BIT, clk);
return 0;
}
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
+ select COMEDI_FC
depends on VIRT_TO_BUS
---help---
Enable support for National Instruments AT-A2150 cards
if (cmd == COMEDI_DEVCONFIG) {
rc = do_devconfig_ioctl(dev,
(struct comedi_devconfig __user *)arg);
+ if (rc == 0)
+ /* Evade comedi_auto_unconfig(). */
+ dev_file_info->hardware_device = NULL;
goto done;
}
struct waveform_private *devpriv = dev->private;
devpriv->timer_running = 0;
- del_timer(&devpriv->timer);
+ del_timer_sync(&devpriv->timer);
return 0;
}
.ao_range_table = &range_ni_M_625x_ao,
.reg_type = ni_reg_625x,
.ao_unipolar = 0,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 8,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_625x_ao,
.reg_type = ni_reg_625x,
.ao_unipolar = 0,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 8,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_625x_ao,
.reg_type = ni_reg_625x,
.ao_unipolar = 0,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 8,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_625x_ao,
.reg_type = ni_reg_625x,
.ao_unipolar = 0,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 32,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_625x_ao,
.reg_type = ni_reg_625x,
.ao_unipolar = 0,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 32,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_628x_ao,
.reg_type = ni_reg_628x,
.ao_unipolar = 1,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 8,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_628x_ao,
.reg_type = ni_reg_628x,
.ao_unipolar = 1,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 8,
.caldac = {caldac_none},
.has_8255 = 0,
.ao_range_table = &range_ni_M_628x_ao,
.reg_type = ni_reg_628x,
.ao_unipolar = 1,
- .ao_speed = 357,
+ .ao_speed = 350,
.num_p0_dio_channels = 32,
.caldac = {caldac_none},
.has_8255 = 0,
depends on FIREWIRE
help
This enables TTY over IEEE 1394, providing high-speed serial
- connectivity to cabled peers.
+ connectivity to cabled peers. This driver implements a
+ ad-hoc transport protocol and is currently limited to
+ Linux-to-Linux communication.
To compile this driver as a module, say M here: the module will
be called firewire-serial.
-TODOs
------
+TODOs prior to this driver moving out of staging
+------------------------------------------------
1. Implement retries for RCODE_BUSY, RCODE_NO_ACK and RCODE_SEND_ERROR
- I/O is handled asynchronously which presents some issues when error
conditions occur.
-- Issues with firewire stack --
1. This driver uses the same unregistered vendor id that the firewire core does
(0xd00d1e). Perhaps this could be exposed as a define in
- firewire-constants.h?
-2. MAX_ASYNC_PAYLOAD needs to be publicly exposed by core/ohci
- - otherwise how will this driver know the max size of address window to
- open for one packet write?
+ firewire.h?
3. Maybe device_max_receive() and link_speed_to_max_payload() should be
taken up by the firewire core?
-4. To avoid dropping rx data while still limiting the maximum buffering,
- the size of the AR context must be known. How to expose this to drivers?
-5. Explore if bigger AR context will reduce RCODE_BUSY responses
- (or auto-grow to certain max size -- but this would require major surgery
- as the current AR is contiguously mapped)
-- Issues with TTY core --
1. Hack for alternate device name scheme
/* Returns the max receive packet size for the given card */
static inline int device_max_receive(struct fw_device *fw_device)
{
- return 1 << (clamp_t(int, fw_device->max_rec, 8U, 13U) + 1);
+ return 1 << (clamp_t(int, fw_device->max_rec, 8U, 11U) + 1);
}
static void fwtty_log_tx_error(struct fwtty_port *port, int rcode)
*/
static inline int link_speed_to_max_payload(unsigned speed)
{
- static const int max_async[] = { 307, 614, 1229, 2458, 4916, 9832, };
- BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_3200);
+ static const int max_async[] = { 307, 614, 1229, 2458, };
+ BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_800);
- speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_3200);
+ speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_800);
if (limit_bw)
return max_async[speed];
else
struct mxs_lradc *lradc = iio_priv(iio);
const uint32_t chan_value = LRADC_CH_ACCUMULATE |
((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
- int i, j = 0;
+ unsigned int i, j = 0;
for_each_set_bit(i, iio->active_scan_mask, iio->masklength) {
lradc->buffer[j] = readl(lradc->base + LRADC_CH(j));
config ADIS16260
tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver"
depends on SPI
- select IIO_TRIGGER if IIO_BUFFER
- select IIO_SW_RING if IIO_BUFFER
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices ADIS16260 ADIS16265
ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors.
ret = spi_read(st->us, st->buf, 2);
if (ret == 0)
- *val = ((st->buf[0] & 0xF) << 8) | st->buf[1];
+ *val = sign_extend32(((st->buf[0] & 0xF) << 8) | st->buf[1], 11);
mutex_unlock(&st->buf_lock);
return ret;
ret = imx_drm_encoder_register(imx_drm_encoder);
if (ret) {
- kfree(imx_drm_encoder);
ret = -ENOMEM;
goto err_register;
}
if (ret)
goto out_failed_irq;
- ipu_reset(ipu);
+ ret = ipu_reset(ipu);
+ if (ret)
+ goto out_failed_reset;
/* Set MCU_T to divide MCU access window into 2 */
ipu_cm_write(ipu, 0x00400000L | (IPU_MCU_T_DEFAULT << 18),
ipu_submodules_exit(ipu);
failed_submodules_init:
ipu_irq_exit(ipu);
+out_failed_reset:
out_failed_irq:
clk_disable_unprepare(ipu->clk);
failed_clk_get:
int ret;
ipu_crtc->ipu_ch = ipu_idmac_get(ipu, pdata->dma[0]);
- if (IS_ERR_OR_NULL(ipu_crtc->ipu_ch)) {
+ if (IS_ERR(ipu_crtc->ipu_ch)) {
ret = PTR_ERR(ipu_crtc->ipu_ch);
goto err_out;
}
if (pdata->dp >= 0) {
ipu_crtc->dp = ipu_dp_get(ipu, pdata->dp);
if (IS_ERR(ipu_crtc->dp)) {
- ret = PTR_ERR(ipu_crtc->ipu_ch);
+ ret = PTR_ERR(ipu_crtc->dp);
goto err_out;
}
}
ipu_crtc->dev = &pdev->dev;
ret = ipu_crtc_init(ipu_crtc, pdata);
+ if (ret)
+ return ret;
platform_set_drvdata(pdev, ipu_crtc);
ccflags-y := -Iinclude/drm -Werror
omapdrm-y := omap_drv.o \
+ omap_irq.o \
omap_debugfs.o \
omap_crtc.o \
omap_plane.o \
. Revisit GEM sync object infrastructure.. TTM has some framework for this
already. Possibly this could be refactored out and made more common?
There should be some way to do this with less wheel-reinvention.
-. Review DSS vs KMS mismatches. The omap_dss_device is sort of part encoder,
- part connector. Which results in a bit of duct tape to fwd calls from
- encoder to connector. Possibly this could be done a bit better.
. Solve PM sequencing on resume. DMM/TILER must be reloaded before any
access is made from any component in the system. Which means on suspend
CRTC's should be disabled, and on resume the LUT should be reprogrammed
struct omap_connector {
struct drm_connector base;
struct omap_dss_device *dssdev;
+ struct drm_encoder *encoder;
};
-static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode,
+void copy_timings_omap_to_drm(struct drm_display_mode *mode,
struct omap_video_timings *timings)
{
mode->clock = timings->pixel_clock;
mode->flags |= DRM_MODE_FLAG_NVSYNC;
}
-static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
+void copy_timings_drm_to_omap(struct omap_video_timings *timings,
struct drm_display_mode *mode)
{
timings->pixel_clock = mode->clock;
timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
}
-static void omap_connector_dpms(struct drm_connector *connector, int mode)
-{
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *dssdev = omap_connector->dssdev;
- int old_dpms;
-
- DBG("%s: %d", dssdev->name, mode);
-
- old_dpms = connector->dpms;
-
- /* from off to on, do from crtc to connector */
- if (mode < old_dpms)
- drm_helper_connector_dpms(connector, mode);
-
- if (mode == DRM_MODE_DPMS_ON) {
- /* store resume info for suspended displays */
- switch (dssdev->state) {
- case OMAP_DSS_DISPLAY_SUSPENDED:
- dssdev->activate_after_resume = true;
- break;
- case OMAP_DSS_DISPLAY_DISABLED: {
- int ret = dssdev->driver->enable(dssdev);
- if (ret) {
- DBG("%s: failed to enable: %d",
- dssdev->name, ret);
- dssdev->driver->disable(dssdev);
- }
- break;
- }
- default:
- break;
- }
- } else {
- /* TODO */
- }
-
- /* from on to off, do from connector to crtc */
- if (mode > old_dpms)
- drm_helper_connector_dpms(connector, mode);
-}
-
-enum drm_connector_status omap_connector_detect(
+static enum drm_connector_status omap_connector_detect(
struct drm_connector *connector, bool force)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev = omap_connector->dssdev;
- dssdev->driver->disable(dssdev);
-
DBG("%s", omap_connector->dssdev->name);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
struct drm_encoder *omap_connector_attached_encoder(
struct drm_connector *connector)
{
- int i;
struct omap_connector *omap_connector = to_omap_connector(connector);
-
- for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
- struct drm_mode_object *obj;
-
- if (connector->encoder_ids[i] == 0)
- break;
-
- obj = drm_mode_object_find(connector->dev,
- connector->encoder_ids[i],
- DRM_MODE_OBJECT_ENCODER);
-
- if (obj) {
- struct drm_encoder *encoder = obj_to_encoder(obj);
- struct omap_overlay_manager *mgr =
- omap_encoder_get_manager(encoder);
- DBG("%s: found %s", omap_connector->dssdev->name,
- mgr->name);
- return encoder;
- }
- }
-
- DBG("%s: no encoder", omap_connector->dssdev->name);
-
- return NULL;
+ return omap_connector->encoder;
}
static const struct drm_connector_funcs omap_connector_funcs = {
- .dpms = omap_connector_dpms,
+ .dpms = drm_helper_connector_dpms,
.detect = omap_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = omap_connector_destroy,
.best_encoder = omap_connector_attached_encoder,
};
-/* called from encoder when mode is set, to propagate settings to the dssdev */
-void omap_connector_mode_set(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- struct drm_device *dev = connector->dev;
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *dssdev = omap_connector->dssdev;
- struct omap_dss_driver *dssdrv = dssdev->driver;
- struct omap_video_timings timings = {0};
-
- copy_timings_drm_to_omap(&timings, mode);
-
- DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
- omap_connector->dssdev->name,
- mode->base.id, mode->name, mode->vrefresh, mode->clock,
- mode->hdisplay, mode->hsync_start,
- mode->hsync_end, mode->htotal,
- mode->vdisplay, mode->vsync_start,
- mode->vsync_end, mode->vtotal, mode->type, mode->flags);
-
- if (dssdrv->check_timings(dssdev, &timings)) {
- dev_err(dev->dev, "could not set timings\n");
- return;
- }
-
- dssdrv->set_timings(dssdev, &timings);
-}
-
/* flush an area of the framebuffer (in case of manual update display that
* is not automatically flushed)
*/
/* initialize connector */
struct drm_connector *omap_connector_init(struct drm_device *dev,
- int connector_type, struct omap_dss_device *dssdev)
+ int connector_type, struct omap_dss_device *dssdev,
+ struct drm_encoder *encoder)
{
struct drm_connector *connector = NULL;
struct omap_connector *omap_connector;
}
omap_connector->dssdev = dssdev;
+ omap_connector->encoder = encoder;
+
connector = &omap_connector->base;
drm_connector_init(dev, connector, &omap_connector_funcs,
struct omap_crtc {
struct drm_crtc base;
struct drm_plane *plane;
+
const char *name;
- int id;
+ int pipe;
+ enum omap_channel channel;
+ struct omap_overlay_manager_info info;
+
+ /*
+ * Temporary: eventually this will go away, but it is needed
+ * for now to keep the output's happy. (They only need
+ * mgr->id.) Eventually this will be replaced w/ something
+ * more common-panel-framework-y
+ */
+ struct omap_overlay_manager mgr;
+
+ struct omap_video_timings timings;
+ bool enabled;
+ bool full_update;
+
+ struct omap_drm_apply apply;
+
+ struct omap_drm_irq apply_irq;
+ struct omap_drm_irq error_irq;
+
+ /* list of in-progress apply's: */
+ struct list_head pending_applies;
+
+ /* list of queued apply's: */
+ struct list_head queued_applies;
+
+ /* for handling queued and in-progress applies: */
+ struct work_struct apply_work;
/* if there is a pending flip, these will be non-null: */
struct drm_pending_vblank_event *event;
struct drm_framebuffer *old_fb;
+
+ /* for handling page flips without caring about what
+ * the callback is called from. Possibly we should just
+ * make omap_gem always call the cb from the worker so
+ * we don't have to care about this..
+ *
+ * XXX maybe fold into apply_work??
+ */
+ struct work_struct page_flip_work;
+};
+
+/*
+ * Manager-ops, callbacks from output when they need to configure
+ * the upstream part of the video pipe.
+ *
+ * Most of these we can ignore until we add support for command-mode
+ * panels.. for video-mode the crtc-helpers already do an adequate
+ * job of sequencing the setup of the video pipe in the proper order
+ */
+
+/* we can probably ignore these until we support command-mode panels: */
+static void omap_crtc_start_update(struct omap_overlay_manager *mgr)
+{
+}
+
+static int omap_crtc_enable(struct omap_overlay_manager *mgr)
+{
+ return 0;
+}
+
+static void omap_crtc_disable(struct omap_overlay_manager *mgr)
+{
+}
+
+static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
+ const struct omap_video_timings *timings)
+{
+ struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
+ DBG("%s", omap_crtc->name);
+ omap_crtc->timings = *timings;
+ omap_crtc->full_update = true;
+}
+
+static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr,
+ const struct dss_lcd_mgr_config *config)
+{
+ struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
+ DBG("%s", omap_crtc->name);
+ dispc_mgr_set_lcd_config(omap_crtc->channel, config);
+}
+
+static int omap_crtc_register_framedone_handler(
+ struct omap_overlay_manager *mgr,
+ void (*handler)(void *), void *data)
+{
+ return 0;
+}
+
+static void omap_crtc_unregister_framedone_handler(
+ struct omap_overlay_manager *mgr,
+ void (*handler)(void *), void *data)
+{
+}
+
+static const struct dss_mgr_ops mgr_ops = {
+ .start_update = omap_crtc_start_update,
+ .enable = omap_crtc_enable,
+ .disable = omap_crtc_disable,
+ .set_timings = omap_crtc_set_timings,
+ .set_lcd_config = omap_crtc_set_lcd_config,
+ .register_framedone_handler = omap_crtc_register_framedone_handler,
+ .unregister_framedone_handler = omap_crtc_unregister_framedone_handler,
};
+/*
+ * CRTC funcs:
+ */
+
static void omap_crtc_destroy(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+ DBG("%s", omap_crtc->name);
+
+ WARN_ON(omap_crtc->apply_irq.registered);
+ omap_irq_unregister(crtc->dev, &omap_crtc->error_irq);
+
omap_crtc->plane->funcs->destroy(omap_crtc->plane);
drm_crtc_cleanup(crtc);
+
kfree(omap_crtc);
}
{
struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ bool enabled = (mode == DRM_MODE_DPMS_ON);
int i;
- WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
+ DBG("%s: %d", omap_crtc->name, mode);
+
+ if (enabled != omap_crtc->enabled) {
+ omap_crtc->enabled = enabled;
+ omap_crtc->full_update = true;
+ omap_crtc_apply(crtc, &omap_crtc->apply);
- for (i = 0; i < priv->num_planes; i++) {
- struct drm_plane *plane = priv->planes[i];
- if (plane->crtc == crtc)
- WARN_ON(omap_plane_dpms(plane, mode));
+ /* also enable our private plane: */
+ WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
+
+ /* and any attached overlay planes: */
+ for (i = 0; i < priv->num_planes; i++) {
+ struct drm_plane *plane = priv->planes[i];
+ if (plane->crtc == crtc)
+ WARN_ON(omap_plane_dpms(plane, mode));
+ }
}
}
struct drm_framebuffer *old_fb)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct drm_plane *plane = omap_crtc->plane;
- return omap_plane_mode_set(plane, crtc, crtc->fb,
+ mode = adjusted_mode;
+
+ DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+ omap_crtc->name, mode->base.id, mode->name,
+ mode->vrefresh, mode->clock,
+ mode->hdisplay, mode->hsync_start,
+ mode->hsync_end, mode->htotal,
+ mode->vdisplay, mode->vsync_start,
+ mode->vsync_end, mode->vtotal,
+ mode->type, mode->flags);
+
+ copy_timings_drm_to_omap(&omap_crtc->timings, mode);
+ omap_crtc->full_update = true;
+
+ return omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb,
0, 0, mode->hdisplay, mode->vdisplay,
x << 16, y << 16,
- mode->hdisplay << 16, mode->vdisplay << 16);
+ mode->hdisplay << 16, mode->vdisplay << 16,
+ NULL, NULL);
}
static void omap_crtc_prepare(struct drm_crtc *crtc)
struct drm_plane *plane = omap_crtc->plane;
struct drm_display_mode *mode = &crtc->mode;
- return plane->funcs->update_plane(plane, crtc, crtc->fb,
+ return omap_plane_mode_set(plane, crtc, crtc->fb,
0, 0, mode->hdisplay, mode->vdisplay,
x << 16, y << 16,
- mode->hdisplay << 16, mode->vdisplay << 16);
+ mode->hdisplay << 16, mode->vdisplay << 16,
+ NULL, NULL);
}
static void omap_crtc_load_lut(struct drm_crtc *crtc)
static void vblank_cb(void *arg)
{
- static uint32_t sequence;
struct drm_crtc *crtc = arg;
struct drm_device *dev = crtc->dev;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct drm_pending_vblank_event *event = omap_crtc->event;
unsigned long flags;
- struct timeval now;
- WARN_ON(!event);
+ spin_lock_irqsave(&dev->event_lock, flags);
+
+ /* wakeup userspace */
+ if (omap_crtc->event)
+ drm_send_vblank_event(dev, omap_crtc->pipe, omap_crtc->event);
omap_crtc->event = NULL;
+ omap_crtc->old_fb = NULL;
- /* wakeup userspace */
- if (event) {
- do_gettimeofday(&now);
-
- spin_lock_irqsave(&dev->event_lock, flags);
- /* TODO: we can't yet use the vblank time accounting,
- * because omapdss lower layer is the one that knows
- * the irq # and registers the handler, which more or
- * less defeats how drm_irq works.. for now just fake
- * the sequence number and use gettimeofday..
- *
- event->event.sequence = drm_vblank_count_and_time(
- dev, omap_crtc->id, &now);
- */
- event->event.sequence = sequence++;
- event->event.tv_sec = now.tv_sec;
- event->event.tv_usec = now.tv_usec;
- list_add_tail(&event->base.link,
- &event->base.file_priv->event_list);
- wake_up_interruptible(&event->base.file_priv->event_wait);
- spin_unlock_irqrestore(&dev->event_lock, flags);
- }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
}
-static void page_flip_cb(void *arg)
+static void page_flip_worker(struct work_struct *work)
{
- struct drm_crtc *crtc = arg;
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct drm_framebuffer *old_fb = omap_crtc->old_fb;
+ struct omap_crtc *omap_crtc =
+ container_of(work, struct omap_crtc, page_flip_work);
+ struct drm_crtc *crtc = &omap_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct drm_display_mode *mode = &crtc->mode;
struct drm_gem_object *bo;
- omap_crtc->old_fb = NULL;
-
- omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
-
- /* really we'd like to setup the callback atomically w/ setting the
- * new scanout buffer to avoid getting stuck waiting an extra vblank
- * cycle.. for now go for correctness and later figure out speed..
- */
- omap_plane_on_endwin(omap_crtc->plane, vblank_cb, crtc);
+ mutex_lock(&dev->mode_config.mutex);
+ omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ crtc->x << 16, crtc->y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16,
+ vblank_cb, crtc);
+ mutex_unlock(&dev->mode_config.mutex);
bo = omap_framebuffer_bo(crtc->fb, 0);
drm_gem_object_unreference_unlocked(bo);
}
+static void page_flip_cb(void *arg)
+{
+ struct drm_crtc *crtc = arg;
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_drm_private *priv = crtc->dev->dev_private;
+
+ /* avoid assumptions about what ctxt we are called from: */
+ queue_work(priv->wq, &omap_crtc->page_flip_work);
+}
+
static int omap_crtc_page_flip_locked(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event)
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
struct drm_gem_object *bo;
- DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id);
+ DBG("%d -> %d (event=%p)", crtc->fb ? crtc->fb->base.id : -1,
+ fb->base.id, event);
- if (omap_crtc->event) {
+ if (omap_crtc->old_fb) {
dev_err(dev->dev, "already a pending flip\n");
return -EINVAL;
}
- omap_crtc->old_fb = crtc->fb;
omap_crtc->event = event;
crtc->fb = fb;
.load_lut = omap_crtc_load_lut,
};
+const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ return &omap_crtc->timings;
+}
+
+enum omap_channel omap_crtc_channel(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ return omap_crtc->channel;
+}
+
+static void omap_crtc_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus)
+{
+ struct omap_crtc *omap_crtc =
+ container_of(irq, struct omap_crtc, error_irq);
+ struct drm_crtc *crtc = &omap_crtc->base;
+ DRM_ERROR("%s: errors: %08x\n", omap_crtc->name, irqstatus);
+ /* avoid getting in a flood, unregister the irq until next vblank */
+ omap_irq_unregister(crtc->dev, &omap_crtc->error_irq);
+}
+
+static void omap_crtc_apply_irq(struct omap_drm_irq *irq, uint32_t irqstatus)
+{
+ struct omap_crtc *omap_crtc =
+ container_of(irq, struct omap_crtc, apply_irq);
+ struct drm_crtc *crtc = &omap_crtc->base;
+
+ if (!omap_crtc->error_irq.registered)
+ omap_irq_register(crtc->dev, &omap_crtc->error_irq);
+
+ if (!dispc_mgr_go_busy(omap_crtc->channel)) {
+ struct omap_drm_private *priv =
+ crtc->dev->dev_private;
+ DBG("%s: apply done", omap_crtc->name);
+ omap_irq_unregister(crtc->dev, &omap_crtc->apply_irq);
+ queue_work(priv->wq, &omap_crtc->apply_work);
+ }
+}
+
+static void apply_worker(struct work_struct *work)
+{
+ struct omap_crtc *omap_crtc =
+ container_of(work, struct omap_crtc, apply_work);
+ struct drm_crtc *crtc = &omap_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct omap_drm_apply *apply, *n;
+ bool need_apply;
+
+ /*
+ * Synchronize everything on mode_config.mutex, to keep
+ * the callbacks and list modification all serialized
+ * with respect to modesetting ioctls from userspace.
+ */
+ mutex_lock(&dev->mode_config.mutex);
+ dispc_runtime_get();
+
+ /*
+ * If we are still pending a previous update, wait.. when the
+ * pending update completes, we get kicked again.
+ */
+ if (omap_crtc->apply_irq.registered)
+ goto out;
+
+ /* finish up previous apply's: */
+ list_for_each_entry_safe(apply, n,
+ &omap_crtc->pending_applies, pending_node) {
+ apply->post_apply(apply);
+ list_del(&apply->pending_node);
+ }
+
+ need_apply = !list_empty(&omap_crtc->queued_applies);
+
+ /* then handle the next round of of queued apply's: */
+ list_for_each_entry_safe(apply, n,
+ &omap_crtc->queued_applies, queued_node) {
+ apply->pre_apply(apply);
+ list_del(&apply->queued_node);
+ apply->queued = false;
+ list_add_tail(&apply->pending_node,
+ &omap_crtc->pending_applies);
+ }
+
+ if (need_apply) {
+ enum omap_channel channel = omap_crtc->channel;
+
+ DBG("%s: GO", omap_crtc->name);
+
+ if (dispc_mgr_is_enabled(channel)) {
+ omap_irq_register(dev, &omap_crtc->apply_irq);
+ dispc_mgr_go(channel);
+ } else {
+ struct omap_drm_private *priv = dev->dev_private;
+ queue_work(priv->wq, &omap_crtc->apply_work);
+ }
+ }
+
+out:
+ dispc_runtime_put();
+ mutex_unlock(&dev->mode_config.mutex);
+}
+
+int omap_crtc_apply(struct drm_crtc *crtc,
+ struct omap_drm_apply *apply)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
+
+ /* no need to queue it again if it is already queued: */
+ if (apply->queued)
+ return 0;
+
+ apply->queued = true;
+ list_add_tail(&apply->queued_node, &omap_crtc->queued_applies);
+
+ /*
+ * If there are no currently pending updates, then go ahead and
+ * kick the worker immediately, otherwise it will run again when
+ * the current update finishes.
+ */
+ if (list_empty(&omap_crtc->pending_applies)) {
+ struct omap_drm_private *priv = crtc->dev->dev_private;
+ queue_work(priv->wq, &omap_crtc->apply_work);
+ }
+
+ return 0;
+}
+
+/* called only from apply */
+static void set_enabled(struct drm_crtc *crtc, bool enable)
+{
+ struct drm_device *dev = crtc->dev;
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ enum omap_channel channel = omap_crtc->channel;
+ struct omap_irq_wait *wait = NULL;
+
+ if (dispc_mgr_is_enabled(channel) == enable)
+ return;
+
+ /* ignore sync-lost irqs during enable/disable */
+ omap_irq_unregister(crtc->dev, &omap_crtc->error_irq);
+
+ if (dispc_mgr_get_framedone_irq(channel)) {
+ if (!enable) {
+ wait = omap_irq_wait_init(dev,
+ dispc_mgr_get_framedone_irq(channel), 1);
+ }
+ } else {
+ /*
+ * When we disable digit output, we need to wait until fields
+ * are done. Otherwise the DSS is still working, and turning
+ * off the clocks prevents DSS from going to OFF mode. And when
+ * enabling, we need to wait for the extra sync losts
+ */
+ wait = omap_irq_wait_init(dev,
+ dispc_mgr_get_vsync_irq(channel), 2);
+ }
+
+ dispc_mgr_enable(channel, enable);
+
+ if (wait) {
+ int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100));
+ if (ret) {
+ dev_err(dev->dev, "%s: timeout waiting for %s\n",
+ omap_crtc->name, enable ? "enable" : "disable");
+ }
+ }
+
+ omap_irq_register(crtc->dev, &omap_crtc->error_irq);
+}
+
+static void omap_crtc_pre_apply(struct omap_drm_apply *apply)
+{
+ struct omap_crtc *omap_crtc =
+ container_of(apply, struct omap_crtc, apply);
+ struct drm_crtc *crtc = &omap_crtc->base;
+ struct drm_encoder *encoder = NULL;
+
+ DBG("%s: enabled=%d, full=%d", omap_crtc->name,
+ omap_crtc->enabled, omap_crtc->full_update);
+
+ if (omap_crtc->full_update) {
+ struct omap_drm_private *priv = crtc->dev->dev_private;
+ int i;
+ for (i = 0; i < priv->num_encoders; i++) {
+ if (priv->encoders[i]->crtc == crtc) {
+ encoder = priv->encoders[i];
+ break;
+ }
+ }
+ }
+
+ if (!omap_crtc->enabled) {
+ set_enabled(&omap_crtc->base, false);
+ if (encoder)
+ omap_encoder_set_enabled(encoder, false);
+ } else {
+ if (encoder) {
+ omap_encoder_set_enabled(encoder, false);
+ omap_encoder_update(encoder, &omap_crtc->mgr,
+ &omap_crtc->timings);
+ omap_encoder_set_enabled(encoder, true);
+ omap_crtc->full_update = false;
+ }
+
+ dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info);
+ dispc_mgr_set_timings(omap_crtc->channel,
+ &omap_crtc->timings);
+ set_enabled(&omap_crtc->base, true);
+ }
+
+ omap_crtc->full_update = false;
+}
+
+static void omap_crtc_post_apply(struct omap_drm_apply *apply)
+{
+ /* nothing needed for post-apply */
+}
+
+static const char *channel_names[] = {
+ [OMAP_DSS_CHANNEL_LCD] = "lcd",
+ [OMAP_DSS_CHANNEL_DIGIT] = "tv",
+ [OMAP_DSS_CHANNEL_LCD2] = "lcd2",
+};
+
/* initialize crtc */
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
- struct omap_overlay *ovl, int id)
+ struct drm_plane *plane, enum omap_channel channel, int id)
{
struct drm_crtc *crtc = NULL;
- struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL);
+ struct omap_crtc *omap_crtc;
+ struct omap_overlay_manager_info *info;
+
+ DBG("%s", channel_names[channel]);
- DBG("%s", ovl->name);
+ omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL);
if (!omap_crtc) {
dev_err(dev->dev, "could not allocate CRTC\n");
crtc = &omap_crtc->base;
- omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true);
+ INIT_WORK(&omap_crtc->page_flip_work, page_flip_worker);
+ INIT_WORK(&omap_crtc->apply_work, apply_worker);
+
+ INIT_LIST_HEAD(&omap_crtc->pending_applies);
+ INIT_LIST_HEAD(&omap_crtc->queued_applies);
+
+ omap_crtc->apply.pre_apply = omap_crtc_pre_apply;
+ omap_crtc->apply.post_apply = omap_crtc_post_apply;
+
+ omap_crtc->apply_irq.irqmask = pipe2vbl(id);
+ omap_crtc->apply_irq.irq = omap_crtc_apply_irq;
+
+ omap_crtc->error_irq.irqmask =
+ dispc_mgr_get_sync_lost_irq(channel);
+ omap_crtc->error_irq.irq = omap_crtc_error_irq;
+ omap_irq_register(dev, &omap_crtc->error_irq);
+
+ omap_crtc->channel = channel;
+ omap_crtc->plane = plane;
omap_crtc->plane->crtc = crtc;
- omap_crtc->name = ovl->name;
- omap_crtc->id = id;
+ omap_crtc->name = channel_names[channel];
+ omap_crtc->pipe = id;
+
+ /* temporary: */
+ omap_crtc->mgr.id = channel;
+
+ dss_install_mgr_ops(&mgr_ops);
+
+ /* TODO: fix hard-coded setup.. add properties! */
+ info = &omap_crtc->info;
+ info->default_color = 0x00000000;
+ info->trans_key = 0x00000000;
+ info->trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+ info->trans_enabled = false;
drm_crtc_init(dev, crtc, &omap_crtc_funcs);
drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
}
}
-#if 0 /* enable when dss2 supports hotplug */
-static int omap_drm_notifier(struct notifier_block *nb,
- unsigned long evt, void *arg)
-{
- switch (evt) {
- case OMAP_DSS_SIZE_CHANGE:
- case OMAP_DSS_HOTPLUG_CONNECT:
- case OMAP_DSS_HOTPLUG_DISCONNECT: {
- struct drm_device *dev = drm_device;
- DBG("hotplug event: evt=%d, dev=%p", evt, dev);
- if (dev)
- drm_sysfs_hotplug_event(dev);
-
- return NOTIFY_OK;
- }
- default: /* don't care about other events for now */
- return NOTIFY_DONE;
- }
-}
-#endif
-
-static void dump_video_chains(void)
-{
- int i;
-
- DBG("dumping video chains: ");
- for (i = 0; i < omap_dss_get_num_overlays(); i++) {
- struct omap_overlay *ovl = omap_dss_get_overlay(i);
- struct omap_overlay_manager *mgr = ovl->manager;
- struct omap_dss_device *dssdev = mgr ?
- mgr->get_device(mgr) : NULL;
- if (dssdev) {
- DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name,
- dssdev->name);
- } else if (mgr) {
- DBG("%d: %s -> %s", i, ovl->name, mgr->name);
- } else {
- DBG("%d: %s", i, ovl->name);
- }
- }
-}
-
-/* create encoders for each manager */
-static int create_encoder(struct drm_device *dev,
- struct omap_overlay_manager *mgr)
-{
- struct omap_drm_private *priv = dev->dev_private;
- struct drm_encoder *encoder = omap_encoder_init(dev, mgr);
-
- if (!encoder) {
- dev_err(dev->dev, "could not create encoder: %s\n",
- mgr->name);
- return -ENOMEM;
- }
-
- BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
-
- priv->encoders[priv->num_encoders++] = encoder;
-
- return 0;
-}
-
-/* create connectors for each display device */
-static int create_connector(struct drm_device *dev,
- struct omap_dss_device *dssdev)
+static int omap_modeset_init(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
- static struct notifier_block *notifier;
- struct drm_connector *connector;
- int j;
-
- if (!dssdev->driver) {
- dev_warn(dev->dev, "%s has no driver.. skipping it\n",
- dssdev->name);
- return 0;
- }
+ struct omap_dss_device *dssdev = NULL;
+ int num_ovls = dss_feat_get_num_ovls();
+ int id;
- if (!(dssdev->driver->get_timings ||
- dssdev->driver->read_edid)) {
- dev_warn(dev->dev, "%s driver does not support "
- "get_timings or read_edid.. skipping it!\n",
- dssdev->name);
- return 0;
- }
+ drm_mode_config_init(dev);
- connector = omap_connector_init(dev,
- get_connector_type(dssdev), dssdev);
+ omap_drm_irq_install(dev);
- if (!connector) {
- dev_err(dev->dev, "could not create connector: %s\n",
- dssdev->name);
- return -ENOMEM;
- }
-
- BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
+ /*
+ * Create private planes and CRTCs for the last NUM_CRTCs overlay
+ * plus manager:
+ */
+ for (id = 0; id < min(num_crtc, num_ovls); id++) {
+ struct drm_plane *plane;
+ struct drm_crtc *crtc;
- priv->connectors[priv->num_connectors++] = connector;
+ plane = omap_plane_init(dev, id, true);
+ crtc = omap_crtc_init(dev, plane, pipe2chan(id), id);
-#if 0 /* enable when dss2 supports hotplug */
- notifier = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
- notifier->notifier_call = omap_drm_notifier;
- omap_dss_add_notify(dssdev, notifier);
-#else
- notifier = NULL;
-#endif
+ BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
+ priv->crtcs[id] = crtc;
+ priv->num_crtcs++;
- for (j = 0; j < priv->num_encoders; j++) {
- struct omap_overlay_manager *mgr =
- omap_encoder_get_manager(priv->encoders[j]);
- if (mgr->get_device(mgr) == dssdev) {
- drm_mode_connector_attach_encoder(connector,
- priv->encoders[j]);
- }
+ priv->planes[id] = plane;
+ priv->num_planes++;
}
- return 0;
-}
-
-/* create up to max_overlays CRTCs mapping to overlays.. by default,
- * connect the overlays to different managers/encoders, giving priority
- * to encoders connected to connectors with a detected connection
- */
-static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl,
- int *j, unsigned int connected_connectors)
-{
- struct omap_drm_private *priv = dev->dev_private;
- struct omap_overlay_manager *mgr = NULL;
- struct drm_crtc *crtc;
-
- /* find next best connector, ones with detected connection first
+ /*
+ * Create normal planes for the remaining overlays:
*/
- while (*j < priv->num_connectors && !mgr) {
- if (connected_connectors & (1 << *j)) {
- struct drm_encoder *encoder =
- omap_connector_attached_encoder(
- priv->connectors[*j]);
- if (encoder)
- mgr = omap_encoder_get_manager(encoder);
+ for (; id < num_ovls; id++) {
+ struct drm_plane *plane = omap_plane_init(dev, id, false);
- }
- (*j)++;
+ BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
+ priv->planes[priv->num_planes++] = plane;
}
- /* if we couldn't find another connected connector, lets start
- * looking at the unconnected connectors:
- *
- * note: it might not be immediately apparent, but thanks to
- * the !mgr check in both this loop and the one above, the only
- * way to enter this loop is with *j == priv->num_connectors,
- * so idx can never go negative.
- */
- while (*j < 2 * priv->num_connectors && !mgr) {
- int idx = *j - priv->num_connectors;
- if (!(connected_connectors & (1 << idx))) {
- struct drm_encoder *encoder =
- omap_connector_attached_encoder(
- priv->connectors[idx]);
- if (encoder)
- mgr = omap_encoder_get_manager(encoder);
+ for_each_dss_dev(dssdev) {
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ if (!dssdev->driver) {
+ dev_warn(dev->dev, "%s has no driver.. skipping it\n",
+ dssdev->name);
+ return 0;
}
- (*j)++;
- }
-
- crtc = omap_crtc_init(dev, ovl, priv->num_crtcs);
-
- if (!crtc) {
- dev_err(dev->dev, "could not create CRTC: %s\n",
- ovl->name);
- return -ENOMEM;
- }
- BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
-
- priv->crtcs[priv->num_crtcs++] = crtc;
-
- return 0;
-}
-
-static int create_plane(struct drm_device *dev, struct omap_overlay *ovl,
- unsigned int possible_crtcs)
-{
- struct omap_drm_private *priv = dev->dev_private;
- struct drm_plane *plane =
- omap_plane_init(dev, ovl, possible_crtcs, false);
-
- if (!plane) {
- dev_err(dev->dev, "could not create plane: %s\n",
- ovl->name);
- return -ENOMEM;
- }
-
- BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
-
- priv->planes[priv->num_planes++] = plane;
-
- return 0;
-}
-
-static int match_dev_name(struct omap_dss_device *dssdev, void *data)
-{
- return !strcmp(dssdev->name, data);
-}
-
-static unsigned int detect_connectors(struct drm_device *dev)
-{
- struct omap_drm_private *priv = dev->dev_private;
- unsigned int connected_connectors = 0;
- int i;
-
- for (i = 0; i < priv->num_connectors; i++) {
- struct drm_connector *connector = priv->connectors[i];
- if (omap_connector_detect(connector, true) ==
- connector_status_connected) {
- connected_connectors |= (1 << i);
+ if (!(dssdev->driver->get_timings ||
+ dssdev->driver->read_edid)) {
+ dev_warn(dev->dev, "%s driver does not support "
+ "get_timings or read_edid.. skipping it!\n",
+ dssdev->name);
+ return 0;
}
- }
-
- return connected_connectors;
-}
-static int omap_modeset_init(struct drm_device *dev)
-{
- const struct omap_drm_platform_data *pdata = dev->dev->platform_data;
- struct omap_kms_platform_data *kms_pdata = NULL;
- struct omap_drm_private *priv = dev->dev_private;
- struct omap_dss_device *dssdev = NULL;
- int i, j;
- unsigned int connected_connectors = 0;
+ encoder = omap_encoder_init(dev, dssdev);
- drm_mode_config_init(dev);
-
- if (pdata && pdata->kms_pdata) {
- kms_pdata = pdata->kms_pdata;
-
- /* if platform data is provided by the board file, use it to
- * control which overlays, managers, and devices we own.
- */
- for (i = 0; i < kms_pdata->mgr_cnt; i++) {
- struct omap_overlay_manager *mgr =
- omap_dss_get_overlay_manager(
- kms_pdata->mgr_ids[i]);
- create_encoder(dev, mgr);
- }
-
- for (i = 0; i < kms_pdata->dev_cnt; i++) {
- struct omap_dss_device *dssdev =
- omap_dss_find_device(
- (void *)kms_pdata->dev_names[i],
- match_dev_name);
- if (!dssdev) {
- dev_warn(dev->dev, "no such dssdev: %s\n",
- kms_pdata->dev_names[i]);
- continue;
- }
- create_connector(dev, dssdev);
+ if (!encoder) {
+ dev_err(dev->dev, "could not create encoder: %s\n",
+ dssdev->name);
+ return -ENOMEM;
}
- connected_connectors = detect_connectors(dev);
+ connector = omap_connector_init(dev,
+ get_connector_type(dssdev), dssdev, encoder);
- j = 0;
- for (i = 0; i < kms_pdata->ovl_cnt; i++) {
- struct omap_overlay *ovl =
- omap_dss_get_overlay(kms_pdata->ovl_ids[i]);
- create_crtc(dev, ovl, &j, connected_connectors);
+ if (!connector) {
+ dev_err(dev->dev, "could not create connector: %s\n",
+ dssdev->name);
+ return -ENOMEM;
}
- for (i = 0; i < kms_pdata->pln_cnt; i++) {
- struct omap_overlay *ovl =
- omap_dss_get_overlay(kms_pdata->pln_ids[i]);
- create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
- }
- } else {
- /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
- * to make educated guesses about everything else
- */
- int max_overlays = min(omap_dss_get_num_overlays(), num_crtc);
+ BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
+ BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
- for (i = 0; i < omap_dss_get_num_overlay_managers(); i++)
- create_encoder(dev, omap_dss_get_overlay_manager(i));
-
- for_each_dss_dev(dssdev) {
- create_connector(dev, dssdev);
- }
+ priv->encoders[priv->num_encoders++] = encoder;
+ priv->connectors[priv->num_connectors++] = connector;
- connected_connectors = detect_connectors(dev);
+ drm_mode_connector_attach_encoder(connector, encoder);
- j = 0;
- for (i = 0; i < max_overlays; i++) {
- create_crtc(dev, omap_dss_get_overlay(i),
- &j, connected_connectors);
- }
-
- /* use any remaining overlays as drm planes */
- for (; i < omap_dss_get_num_overlays(); i++) {
- struct omap_overlay *ovl = omap_dss_get_overlay(i);
- create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+ /* figure out which crtc's we can connect the encoder to: */
+ encoder->possible_crtcs = 0;
+ for (id = 0; id < priv->num_crtcs; id++) {
+ enum omap_dss_output_id supported_outputs =
+ dss_feat_get_supported_outputs(pipe2chan(id));
+ if (supported_outputs & dssdev->output->id)
+ encoder->possible_crtcs |= (1 << id);
}
}
- /* for now keep the mapping of CRTCs and encoders static.. */
- for (i = 0; i < priv->num_encoders; i++) {
- struct drm_encoder *encoder = priv->encoders[i];
- struct omap_overlay_manager *mgr =
- omap_encoder_get_manager(encoder);
-
- encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
-
- DBG("%s: possible_crtcs=%08x", mgr->name,
- encoder->possible_crtcs);
- }
-
- dump_video_chains();
-
dev->mode_config.min_width = 32;
dev->mode_config.min_height = 32;
struct drm_file *file_priv)
{
struct drm_omap_gem_new *args = data;
- DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
+ VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
args->size.bytes, args->flags);
return omap_gem_new_handle(dev, file_priv, args->size,
args->flags, &args->handle);
struct drm_gem_object *obj;
int ret = 0;
- DBG("%p:%p: handle=%d", dev, file_priv, args->handle);
+ VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (!obj)
dev->dev_private = priv;
- ret = omapdss_compat_init();
- if (ret) {
- dev_err(dev->dev, "coult not init omapdss\n");
- dev->dev_private = NULL;
- kfree(priv);
- return ret;
- }
-
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
INIT_LIST_HEAD(&priv->obj_list);
dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret);
dev->dev_private = NULL;
kfree(priv);
- omapdss_compat_uninit();
return ret;
}
+ ret = drm_vblank_init(dev, priv->num_crtcs);
+ if (ret)
+ dev_warn(dev->dev, "could not init vblank\n");
+
priv->fbdev = omap_fbdev_init(dev);
if (!priv->fbdev) {
dev_warn(dev->dev, "omap_fbdev_init failed\n");
drm_kms_helper_poll_init(dev);
- ret = drm_vblank_init(dev, priv->num_crtcs);
- if (ret)
- dev_warn(dev->dev, "could not init vblank\n");
-
return 0;
}
DBG("unload: dev=%p", dev);
- drm_vblank_cleanup(dev);
drm_kms_helper_poll_fini(dev);
+ drm_vblank_cleanup(dev);
+ omap_drm_irq_uninstall(dev);
omap_fbdev_free(dev);
omap_modeset_free(dev);
flush_workqueue(priv->wq);
destroy_workqueue(priv->wq);
- omapdss_compat_uninit();
-
kfree(dev->dev_private);
dev->dev_private = NULL;
}
}
+ mutex_lock(&dev->mode_config.mutex);
ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev);
+ mutex_unlock(&dev->mode_config.mutex);
if (ret)
DBG("failed to restore crtc mode");
}
DBG("postclose: dev=%p, file=%p", dev, file);
}
-/**
- * enable_vblank - enable vblank interrupt events
- * @dev: DRM device
- * @crtc: which irq to enable
- *
- * Enable vblank interrupts for @crtc. If the device doesn't have
- * a hardware vblank counter, this routine should be a no-op, since
- * interrupts will have to stay on to keep the count accurate.
- *
- * RETURNS
- * Zero on success, appropriate errno if the given @crtc's vblank
- * interrupt cannot be enabled.
- */
-static int dev_enable_vblank(struct drm_device *dev, int crtc)
-{
- DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc);
- return 0;
-}
-
-/**
- * disable_vblank - disable vblank interrupt events
- * @dev: DRM device
- * @crtc: which irq to enable
- *
- * Disable vblank interrupts for @crtc. If the device doesn't have
- * a hardware vblank counter, this routine should be a no-op, since
- * interrupts will have to stay on to keep the count accurate.
- */
-static void dev_disable_vblank(struct drm_device *dev, int crtc)
-{
- DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc);
-}
-
-static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS)
-{
- return IRQ_HANDLED;
-}
-
-static void dev_irq_preinstall(struct drm_device *dev)
-{
- DBG("irq_preinstall: dev=%p", dev);
-}
-
-static int dev_irq_postinstall(struct drm_device *dev)
-{
- DBG("irq_postinstall: dev=%p", dev);
- return 0;
-}
-
-static void dev_irq_uninstall(struct drm_device *dev)
-{
- DBG("irq_uninstall: dev=%p", dev);
-}
-
static const struct vm_operations_struct omap_gem_vm_ops = {
.fault = omap_gem_fault,
.open = drm_gem_vm_open,
.preclose = dev_preclose,
.postclose = dev_postclose,
.get_vblank_counter = drm_vblank_count,
- .enable_vblank = dev_enable_vblank,
- .disable_vblank = dev_disable_vblank,
- .irq_preinstall = dev_irq_preinstall,
- .irq_postinstall = dev_irq_postinstall,
- .irq_uninstall = dev_irq_uninstall,
- .irq_handler = dev_irq_handler,
+ .enable_vblank = omap_irq_enable_vblank,
+ .disable_vblank = omap_irq_disable_vblank,
+ .irq_preinstall = omap_irq_preinstall,
+ .irq_postinstall = omap_irq_postinstall,
+ .irq_uninstall = omap_irq_uninstall,
+ .irq_handler = omap_irq_handler,
#ifdef CONFIG_DEBUG_FS
.debugfs_init = omap_debugfs_init,
.debugfs_cleanup = omap_debugfs_cleanup,
#include <linux/platform_data/omap_drm.h>
#include "omap_drm.h"
+
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */
*/
#define MAX_MAPPERS 2
+/* parameters which describe (unrotated) coordinates of scanout within a fb: */
+struct omap_drm_window {
+ uint32_t rotation;
+ int32_t crtc_x, crtc_y; /* signed because can be offscreen */
+ uint32_t crtc_w, crtc_h;
+ uint32_t src_x, src_y;
+ uint32_t src_w, src_h;
+};
+
+/* Once GO bit is set, we can't make further updates to shadowed registers
+ * until the GO bit is cleared. So various parts in the kms code that need
+ * to update shadowed registers queue up a pair of callbacks, pre_apply
+ * which is called before setting GO bit, and post_apply that is called
+ * after GO bit is cleared. The crtc manages the queuing, and everyone
+ * else goes thru omap_crtc_apply() using these callbacks so that the
+ * code which has to deal w/ GO bit state is centralized.
+ */
+struct omap_drm_apply {
+ struct list_head pending_node, queued_node;
+ bool queued;
+ void (*pre_apply)(struct omap_drm_apply *apply);
+ void (*post_apply)(struct omap_drm_apply *apply);
+};
+
+/* For transiently registering for different DSS irqs that various parts
+ * of the KMS code need during setup/configuration. We these are not
+ * necessarily the same as what drm_vblank_get/put() are requesting, and
+ * the hysteresis in drm_vblank_put() is not necessarily desirable for
+ * internal housekeeping related irq usage.
+ */
+struct omap_drm_irq {
+ struct list_head node;
+ uint32_t irqmask;
+ bool registered;
+ void (*irq)(struct omap_drm_irq *irq, uint32_t irqstatus);
+};
+
+/* For KMS code that needs to wait for a certain # of IRQs:
+ */
+struct omap_irq_wait;
+struct omap_irq_wait * omap_irq_wait_init(struct drm_device *dev,
+ uint32_t irqmask, int count);
+int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait,
+ unsigned long timeout);
+
struct omap_drm_private {
uint32_t omaprev;
struct workqueue_struct *wq;
+ /* list of GEM objects: */
struct list_head obj_list;
bool has_dmm;
/* properties: */
struct drm_property *rotation_prop;
struct drm_property *zorder_prop;
+
+ /* irq handling: */
+ struct list_head irq_list; /* list of omap_drm_irq */
+ uint32_t vblank_mask; /* irq bits set for userspace vblank */
+ struct omap_drm_irq error_handler;
};
/* this should probably be in drm-core to standardize amongst drivers */
#define DRM_REFLECT_X 4
#define DRM_REFLECT_Y 5
-/* parameters which describe (unrotated) coordinates of scanout within a fb: */
-struct omap_drm_window {
- uint32_t rotation;
- int32_t crtc_x, crtc_y; /* signed because can be offscreen */
- uint32_t crtc_w, crtc_h;
- uint32_t src_x, src_y;
- uint32_t src_w, src_h;
-};
-
#ifdef CONFIG_DEBUG_FS
int omap_debugfs_init(struct drm_minor *minor);
void omap_debugfs_cleanup(struct drm_minor *minor);
void omap_gem_describe_objects(struct list_head *list, struct seq_file *m);
#endif
+int omap_irq_enable_vblank(struct drm_device *dev, int crtc);
+void omap_irq_disable_vblank(struct drm_device *dev, int crtc);
+irqreturn_t omap_irq_handler(DRM_IRQ_ARGS);
+void omap_irq_preinstall(struct drm_device *dev);
+int omap_irq_postinstall(struct drm_device *dev);
+void omap_irq_uninstall(struct drm_device *dev);
+void omap_irq_register(struct drm_device *dev, struct omap_drm_irq *irq);
+void omap_irq_unregister(struct drm_device *dev, struct omap_drm_irq *irq);
+int omap_drm_irq_uninstall(struct drm_device *dev);
+int omap_drm_irq_install(struct drm_device *dev);
+
struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
void omap_fbdev_free(struct drm_device *dev);
+const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc);
+enum omap_channel omap_crtc_channel(struct drm_crtc *crtc);
+int omap_crtc_apply(struct drm_crtc *crtc,
+ struct omap_drm_apply *apply);
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
- struct omap_overlay *ovl, int id);
+ struct drm_plane *plane, enum omap_channel channel, int id);
struct drm_plane *omap_plane_init(struct drm_device *dev,
- struct omap_overlay *ovl, unsigned int possible_crtcs,
- bool priv);
+ int plane_id, bool private_plane);
int omap_plane_dpms(struct drm_plane *plane, int mode);
int omap_plane_mode_set(struct drm_plane *plane,
struct drm_crtc *crtc, struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h);
-void omap_plane_on_endwin(struct drm_plane *plane,
+ uint32_t src_w, uint32_t src_h,
void (*fxn)(void *), void *arg);
void omap_plane_install_properties(struct drm_plane *plane,
struct drm_mode_object *obj);
struct drm_property *property, uint64_t val);
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
- struct omap_overlay_manager *mgr);
-struct omap_overlay_manager *omap_encoder_get_manager(
+ struct omap_dss_device *dssdev);
+int omap_encoder_set_enabled(struct drm_encoder *encoder, bool enabled);
+int omap_encoder_update(struct drm_encoder *encoder,
+ struct omap_overlay_manager *mgr,
+ struct omap_video_timings *timings);
+
+struct drm_connector *omap_connector_init(struct drm_device *dev,
+ int connector_type, struct omap_dss_device *dssdev,
struct drm_encoder *encoder);
struct drm_encoder *omap_connector_attached_encoder(
struct drm_connector *connector);
-enum drm_connector_status omap_connector_detect(
- struct drm_connector *connector, bool force);
-
-struct drm_connector *omap_connector_init(struct drm_device *dev,
- int connector_type, struct omap_dss_device *dssdev);
-void omap_connector_mode_set(struct drm_connector *connector,
- struct drm_display_mode *mode);
void omap_connector_flush(struct drm_connector *connector,
int x, int y, int w, int h);
+void copy_timings_omap_to_drm(struct drm_display_mode *mode,
+ struct omap_video_timings *timings);
+void copy_timings_drm_to_omap(struct omap_video_timings *timings,
+ struct drm_display_mode *mode);
+
uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats,
uint32_t max_formats, enum omap_color_mode supported_modes);
struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
return ALIGN(pitch, 8 * bytespp);
}
+static inline enum omap_channel pipe2chan(int pipe)
+{
+ int num_mgrs = dss_feat_get_num_mgrs();
+
+ /*
+ * We usually don't want to create a CRTC for each manager,
+ * at least not until we have a way to expose private planes
+ * to userspace. Otherwise there would not be enough video
+ * pipes left for drm planes. The higher #'d managers tend
+ * to have more features so start in reverse order.
+ */
+ return num_mgrs - pipe - 1;
+}
+
+/* map crtc to vblank mask */
+static inline uint32_t pipe2vbl(int crtc)
+{
+ enum omap_channel channel = pipe2chan(crtc);
+ return dispc_mgr_get_vsync_irq(channel);
+}
+
+static inline int crtc2pipe(struct drm_device *dev, struct drm_crtc *crtc)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(priv->crtcs); i++)
+ if (priv->crtcs[i] == crtc)
+ return i;
+
+ BUG(); /* bogus CRTC ptr */
+ return -1;
+}
+
/* should these be made into common util helpers?
*/
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include <linux/list.h>
+
+
/*
* encoder funcs
*/
#define to_omap_encoder(x) container_of(x, struct omap_encoder, base)
+/* The encoder and connector both map to same dssdev.. the encoder
+ * handles the 'active' parts, ie. anything the modifies the state
+ * of the hw, and the connector handles the 'read-only' parts, like
+ * detecting connection and reading edid.
+ */
struct omap_encoder {
struct drm_encoder base;
- struct omap_overlay_manager *mgr;
+ struct omap_dss_device *dssdev;
};
static void omap_encoder_destroy(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- DBG("%s", omap_encoder->mgr->name);
drm_encoder_cleanup(encoder);
kfree(omap_encoder);
}
+static const struct drm_encoder_funcs omap_encoder_funcs = {
+ .destroy = omap_encoder_destroy,
+};
+
+/*
+ * The CRTC drm_crtc_helper_set_mode() doesn't really give us the right
+ * order.. the easiest way to work around this for now is to make all
+ * the encoder-helper's no-op's and have the omap_crtc code take care
+ * of the sequencing and call us in the right points.
+ *
+ * Eventually to handle connecting CRTCs to different encoders properly,
+ * either the CRTC helpers need to change or we need to replace
+ * drm_crtc_helper_set_mode(), but lets wait until atomic-modeset for
+ * that.
+ */
+
static void omap_encoder_dpms(struct drm_encoder *encoder, int mode)
{
- struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- DBG("%s: %d", omap_encoder->mgr->name, mode);
}
static bool omap_encoder_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- DBG("%s", omap_encoder->mgr->name);
return true;
}
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct omap_drm_private *priv = dev->dev_private;
- int i;
-
- mode = adjusted_mode;
-
- DBG("%s: set mode: %dx%d", omap_encoder->mgr->name,
- mode->hdisplay, mode->vdisplay);
-
- for (i = 0; i < priv->num_connectors; i++) {
- struct drm_connector *connector = priv->connectors[i];
- if (connector->encoder == encoder)
- omap_connector_mode_set(connector, mode);
-
- }
}
static void omap_encoder_prepare(struct drm_encoder *encoder)
{
- struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- struct drm_encoder_helper_funcs *encoder_funcs =
- encoder->helper_private;
- DBG("%s", omap_encoder->mgr->name);
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
}
static void omap_encoder_commit(struct drm_encoder *encoder)
{
- struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- struct drm_encoder_helper_funcs *encoder_funcs =
- encoder->helper_private;
- DBG("%s", omap_encoder->mgr->name);
- omap_encoder->mgr->apply(omap_encoder->mgr);
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
}
-static const struct drm_encoder_funcs omap_encoder_funcs = {
- .destroy = omap_encoder_destroy,
-};
-
static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
.dpms = omap_encoder_dpms,
.mode_fixup = omap_encoder_mode_fixup,
.commit = omap_encoder_commit,
};
-struct omap_overlay_manager *omap_encoder_get_manager(
- struct drm_encoder *encoder)
+/*
+ * Instead of relying on the helpers for modeset, the omap_crtc code
+ * calls these functions in the proper sequence.
+ */
+
+int omap_encoder_set_enabled(struct drm_encoder *encoder, bool enabled)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- return omap_encoder->mgr;
+ struct omap_dss_device *dssdev = omap_encoder->dssdev;
+ struct omap_dss_driver *dssdrv = dssdev->driver;
+
+ if (enabled) {
+ return dssdrv->enable(dssdev);
+ } else {
+ dssdrv->disable(dssdev);
+ return 0;
+ }
+}
+
+int omap_encoder_update(struct drm_encoder *encoder,
+ struct omap_overlay_manager *mgr,
+ struct omap_video_timings *timings)
+{
+ struct drm_device *dev = encoder->dev;
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ struct omap_dss_device *dssdev = omap_encoder->dssdev;
+ struct omap_dss_driver *dssdrv = dssdev->driver;
+ int ret;
+
+ dssdev->output->manager = mgr;
+
+ ret = dssdrv->check_timings(dssdev, timings);
+ if (ret) {
+ dev_err(dev->dev, "could not set timings: %d\n", ret);
+ return ret;
+ }
+
+ dssdrv->set_timings(dssdev, timings);
+
+ return 0;
}
/* initialize encoder */
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
- struct omap_overlay_manager *mgr)
+ struct omap_dss_device *dssdev)
{
struct drm_encoder *encoder = NULL;
struct omap_encoder *omap_encoder;
- struct omap_overlay_manager_info info;
- int ret;
-
- DBG("%s", mgr->name);
omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL);
if (!omap_encoder) {
goto fail;
}
- omap_encoder->mgr = mgr;
+ omap_encoder->dssdev = dssdev;
+
encoder = &omap_encoder->base;
drm_encoder_init(dev, encoder, &omap_encoder_funcs,
DRM_MODE_ENCODER_TMDS);
drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs);
- mgr->get_manager_info(mgr, &info);
-
- /* TODO: fix hard-coded setup.. */
- info.default_color = 0x00000000;
- info.trans_key = 0x00000000;
- info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
- info.trans_enabled = false;
-
- ret = mgr->set_manager_info(mgr, &info);
- if (ret) {
- dev_err(dev->dev, "could not set manager info\n");
- goto fail;
- }
-
- ret = mgr->apply(mgr);
- if (ret) {
- dev_err(dev->dev, "could not apply\n");
- goto fail;
- }
-
return encoder;
fail:
struct dma_buf *omap_gem_prime_export(struct drm_device *dev,
struct drm_gem_object *obj, int flags)
{
- return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600);
+ return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, flags);
}
struct drm_gem_object *omap_gem_prime_import(struct drm_device *dev,
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_irq.c
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+static DEFINE_SPINLOCK(list_lock);
+
+static void omap_irq_error_handler(struct omap_drm_irq *irq,
+ uint32_t irqstatus)
+{
+ DRM_ERROR("errors: %08x\n", irqstatus);
+}
+
+/* call with list_lock and dispc runtime held */
+static void omap_irq_update(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_drm_irq *irq;
+ uint32_t irqmask = priv->vblank_mask;
+
+ BUG_ON(!spin_is_locked(&list_lock));
+
+ list_for_each_entry(irq, &priv->irq_list, node)
+ irqmask |= irq->irqmask;
+
+ DBG("irqmask=%08x", irqmask);
+
+ dispc_write_irqenable(irqmask);
+ dispc_read_irqenable(); /* flush posted write */
+}
+
+void omap_irq_register(struct drm_device *dev, struct omap_drm_irq *irq)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ unsigned long flags;
+
+ dispc_runtime_get();
+ spin_lock_irqsave(&list_lock, flags);
+
+ if (!WARN_ON(irq->registered)) {
+ irq->registered = true;
+ list_add(&irq->node, &priv->irq_list);
+ omap_irq_update(dev);
+ }
+
+ spin_unlock_irqrestore(&list_lock, flags);
+ dispc_runtime_put();
+}
+
+void omap_irq_unregister(struct drm_device *dev, struct omap_drm_irq *irq)
+{
+ unsigned long flags;
+
+ dispc_runtime_get();
+ spin_lock_irqsave(&list_lock, flags);
+
+ if (!WARN_ON(!irq->registered)) {
+ irq->registered = false;
+ list_del(&irq->node);
+ omap_irq_update(dev);
+ }
+
+ spin_unlock_irqrestore(&list_lock, flags);
+ dispc_runtime_put();
+}
+
+struct omap_irq_wait {
+ struct omap_drm_irq irq;
+ int count;
+};
+
+static DECLARE_WAIT_QUEUE_HEAD(wait_event);
+
+static void wait_irq(struct omap_drm_irq *irq, uint32_t irqstatus)
+{
+ struct omap_irq_wait *wait =
+ container_of(irq, struct omap_irq_wait, irq);
+ wait->count--;
+ wake_up_all(&wait_event);
+}
+
+struct omap_irq_wait * omap_irq_wait_init(struct drm_device *dev,
+ uint32_t irqmask, int count)
+{
+ struct omap_irq_wait *wait = kzalloc(sizeof(*wait), GFP_KERNEL);
+ wait->irq.irq = wait_irq;
+ wait->irq.irqmask = irqmask;
+ wait->count = count;
+ omap_irq_register(dev, &wait->irq);
+ return wait;
+}
+
+int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait,
+ unsigned long timeout)
+{
+ int ret = wait_event_timeout(wait_event, (wait->count <= 0), timeout);
+ omap_irq_unregister(dev, &wait->irq);
+ kfree(wait);
+ if (ret == 0)
+ return -1;
+ return 0;
+}
+
+/**
+ * enable_vblank - enable vblank interrupt events
+ * @dev: DRM device
+ * @crtc: which irq to enable
+ *
+ * Enable vblank interrupts for @crtc. If the device doesn't have
+ * a hardware vblank counter, this routine should be a no-op, since
+ * interrupts will have to stay on to keep the count accurate.
+ *
+ * RETURNS
+ * Zero on success, appropriate errno if the given @crtc's vblank
+ * interrupt cannot be enabled.
+ */
+int omap_irq_enable_vblank(struct drm_device *dev, int crtc)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ unsigned long flags;
+
+ DBG("dev=%p, crtc=%d", dev, crtc);
+
+ dispc_runtime_get();
+ spin_lock_irqsave(&list_lock, flags);
+ priv->vblank_mask |= pipe2vbl(crtc);
+ omap_irq_update(dev);
+ spin_unlock_irqrestore(&list_lock, flags);
+ dispc_runtime_put();
+
+ return 0;
+}
+
+/**
+ * disable_vblank - disable vblank interrupt events
+ * @dev: DRM device
+ * @crtc: which irq to enable
+ *
+ * Disable vblank interrupts for @crtc. If the device doesn't have
+ * a hardware vblank counter, this routine should be a no-op, since
+ * interrupts will have to stay on to keep the count accurate.
+ */
+void omap_irq_disable_vblank(struct drm_device *dev, int crtc)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ unsigned long flags;
+
+ DBG("dev=%p, crtc=%d", dev, crtc);
+
+ dispc_runtime_get();
+ spin_lock_irqsave(&list_lock, flags);
+ priv->vblank_mask &= ~pipe2vbl(crtc);
+ omap_irq_update(dev);
+ spin_unlock_irqrestore(&list_lock, flags);
+ dispc_runtime_put();
+}
+
+irqreturn_t omap_irq_handler(DRM_IRQ_ARGS)
+{
+ struct drm_device *dev = (struct drm_device *) arg;
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_drm_irq *handler, *n;
+ unsigned long flags;
+ unsigned int id;
+ u32 irqstatus;
+
+ irqstatus = dispc_read_irqstatus();
+ dispc_clear_irqstatus(irqstatus);
+ dispc_read_irqstatus(); /* flush posted write */
+
+ VERB("irqs: %08x", irqstatus);
+
+ for (id = 0; id < priv->num_crtcs; id++)
+ if (irqstatus & pipe2vbl(id))
+ drm_handle_vblank(dev, id);
+
+ spin_lock_irqsave(&list_lock, flags);
+ list_for_each_entry_safe(handler, n, &priv->irq_list, node) {
+ if (handler->irqmask & irqstatus) {
+ spin_unlock_irqrestore(&list_lock, flags);
+ handler->irq(handler, handler->irqmask & irqstatus);
+ spin_lock_irqsave(&list_lock, flags);
+ }
+ }
+ spin_unlock_irqrestore(&list_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+void omap_irq_preinstall(struct drm_device *dev)
+{
+ DBG("dev=%p", dev);
+ dispc_runtime_get();
+ dispc_clear_irqstatus(0xffffffff);
+ dispc_runtime_put();
+}
+
+int omap_irq_postinstall(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_drm_irq *error_handler = &priv->error_handler;
+
+ DBG("dev=%p", dev);
+
+ INIT_LIST_HEAD(&priv->irq_list);
+
+ error_handler->irq = omap_irq_error_handler;
+ error_handler->irqmask = DISPC_IRQ_OCP_ERR;
+
+ /* for now ignore DISPC_IRQ_SYNC_LOST_DIGIT.. really I think
+ * we just need to ignore it while enabling tv-out
+ */
+ error_handler->irqmask &= ~DISPC_IRQ_SYNC_LOST_DIGIT;
+
+ omap_irq_register(dev, error_handler);
+
+ return 0;
+}
+
+void omap_irq_uninstall(struct drm_device *dev)
+{
+ DBG("dev=%p", dev);
+ // TODO prolly need to call drm_irq_uninstall() somewhere too
+}
+
+/*
+ * We need a special version, instead of just using drm_irq_install(),
+ * because we need to register the irq via omapdss. Once omapdss and
+ * omapdrm are merged together we can assign the dispc hwmod data to
+ * ourselves and drop these and just use drm_irq_{install,uninstall}()
+ */
+
+int omap_drm_irq_install(struct drm_device *dev)
+{
+ int ret;
+
+ mutex_lock(&dev->struct_mutex);
+
+ if (dev->irq_enabled) {
+ mutex_unlock(&dev->struct_mutex);
+ return -EBUSY;
+ }
+ dev->irq_enabled = 1;
+ mutex_unlock(&dev->struct_mutex);
+
+ /* Before installing handler */
+ if (dev->driver->irq_preinstall)
+ dev->driver->irq_preinstall(dev);
+
+ ret = dispc_request_irq(dev->driver->irq_handler, dev);
+
+ if (ret < 0) {
+ mutex_lock(&dev->struct_mutex);
+ dev->irq_enabled = 0;
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
+
+ /* After installing handler */
+ if (dev->driver->irq_postinstall)
+ ret = dev->driver->irq_postinstall(dev);
+
+ if (ret < 0) {
+ mutex_lock(&dev->struct_mutex);
+ dev->irq_enabled = 0;
+ mutex_unlock(&dev->struct_mutex);
+ dispc_free_irq(dev);
+ }
+
+ return ret;
+}
+
+int omap_drm_irq_uninstall(struct drm_device *dev)
+{
+ unsigned long irqflags;
+ int irq_enabled, i;
+
+ mutex_lock(&dev->struct_mutex);
+ irq_enabled = dev->irq_enabled;
+ dev->irq_enabled = 0;
+ mutex_unlock(&dev->struct_mutex);
+
+ /*
+ * Wake up any waiters so they don't hang.
+ */
+ if (dev->num_crtcs) {
+ spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ for (i = 0; i < dev->num_crtcs; i++) {
+ DRM_WAKEUP(&dev->vbl_queue[i]);
+ dev->vblank_enabled[i] = 0;
+ dev->last_vblank[i] =
+ dev->driver->get_vblank_counter(dev, i);
+ }
+ spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+ }
+
+ if (!irq_enabled)
+ return -EINVAL;
+
+ if (dev->driver->irq_uninstall)
+ dev->driver->irq_uninstall(dev);
+
+ dispc_free_irq(dev);
+
+ return 0;
+}
struct omap_plane {
struct drm_plane base;
- struct omap_overlay *ovl;
+ int id; /* TODO rename omap_plane -> omap_plane_id in omapdss so I can use the enum */
+ const char *name;
struct omap_overlay_info info;
+ struct omap_drm_apply apply;
/* position/orientation of scanout within the fb: */
struct omap_drm_window win;
-
+ bool enabled;
/* last fb that we pinned: */
struct drm_framebuffer *pinned_fb;
uint32_t nformats;
uint32_t formats[32];
- /* for synchronizing access to unpins fifo */
- struct mutex unpin_mutex;
+ struct omap_drm_irq error_irq;
- /* set of bo's pending unpin until next END_WIN irq */
+ /* set of bo's pending unpin until next post_apply() */
DECLARE_KFIFO_PTR(unpin_fifo, struct drm_gem_object *);
- int num_unpins, pending_num_unpins;
-
- /* for deferred unpin when we need to wait for scanout complete irq */
- struct work_struct work;
-
- /* callback on next endwin irq */
- struct callback endwin;
-};
-/* map from ovl->id to the irq we are interested in for scanout-done */
-static const uint32_t id2irq[] = {
- [OMAP_DSS_GFX] = DISPC_IRQ_GFX_END_WIN,
- [OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_END_WIN,
- [OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_END_WIN,
- [OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_END_WIN,
+ // XXX maybe get rid of this and handle vblank in crtc too?
+ struct callback apply_done_cb;
};
-static void dispc_isr(void *arg, uint32_t mask)
-{
- struct drm_plane *plane = arg;
- struct omap_plane *omap_plane = to_omap_plane(plane);
- struct omap_drm_private *priv = plane->dev->dev_private;
-
- omap_dispc_unregister_isr(dispc_isr, plane,
- id2irq[omap_plane->ovl->id]);
-
- queue_work(priv->wq, &omap_plane->work);
-}
-
-static void unpin_worker(struct work_struct *work)
-{
- struct omap_plane *omap_plane =
- container_of(work, struct omap_plane, work);
- struct callback endwin;
-
- mutex_lock(&omap_plane->unpin_mutex);
- DBG("unpinning %d of %d", omap_plane->num_unpins,
- omap_plane->num_unpins + omap_plane->pending_num_unpins);
- while (omap_plane->num_unpins > 0) {
- struct drm_gem_object *bo = NULL;
- int ret = kfifo_get(&omap_plane->unpin_fifo, &bo);
- WARN_ON(!ret);
- omap_gem_put_paddr(bo);
- drm_gem_object_unreference_unlocked(bo);
- omap_plane->num_unpins--;
- }
- endwin = omap_plane->endwin;
- omap_plane->endwin.fxn = NULL;
- mutex_unlock(&omap_plane->unpin_mutex);
-
- if (endwin.fxn)
- endwin.fxn(endwin.arg);
-}
-
-static void install_irq(struct drm_plane *plane)
-{
- struct omap_plane *omap_plane = to_omap_plane(plane);
- struct omap_overlay *ovl = omap_plane->ovl;
- int ret;
-
- ret = omap_dispc_register_isr(dispc_isr, plane, id2irq[ovl->id]);
-
- /*
- * omapdss has upper limit on # of registered irq handlers,
- * which we shouldn't hit.. but if we do the limit should
- * be raised or bad things happen:
- */
- WARN_ON(ret == -EBUSY);
-}
-
-/* push changes down to dss2 */
-static int commit(struct drm_plane *plane)
-{
- struct drm_device *dev = plane->dev;
- struct omap_plane *omap_plane = to_omap_plane(plane);
- struct omap_overlay *ovl = omap_plane->ovl;
- struct omap_overlay_info *info = &omap_plane->info;
- int ret;
-
- DBG("%s", ovl->name);
- DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
- info->out_height, info->screen_width);
- DBG("%d,%d %08x %08x", info->pos_x, info->pos_y,
- info->paddr, info->p_uv_addr);
-
- /* NOTE: do we want to do this at all here, or just wait
- * for dpms(ON) since other CRTC's may not have their mode
- * set yet, so fb dimensions may still change..
- */
- ret = ovl->set_overlay_info(ovl, info);
- if (ret) {
- dev_err(dev->dev, "could not set overlay info\n");
- return ret;
- }
-
- mutex_lock(&omap_plane->unpin_mutex);
- omap_plane->num_unpins += omap_plane->pending_num_unpins;
- omap_plane->pending_num_unpins = 0;
- mutex_unlock(&omap_plane->unpin_mutex);
-
- /* our encoder doesn't necessarily get a commit() after this, in
- * particular in the dpms() and mode_set_base() cases, so force the
- * manager to update:
- *
- * could this be in the encoder somehow?
- */
- if (ovl->manager) {
- ret = ovl->manager->apply(ovl->manager);
- if (ret) {
- dev_err(dev->dev, "could not apply settings\n");
- return ret;
- }
-
- /*
- * NOTE: really this should be atomic w/ mgr->apply() but
- * omapdss does not expose such an API
- */
- if (omap_plane->num_unpins > 0)
- install_irq(plane);
-
- } else {
- struct omap_drm_private *priv = dev->dev_private;
- queue_work(priv->wq, &omap_plane->work);
- }
-
-
- if (ovl->is_enabled(ovl)) {
- omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y,
- info->out_width, info->out_height);
- }
-
- return 0;
-}
-
-/* when CRTC that we are attached to has potentially changed, this checks
- * if we are attached to proper manager, and if necessary updates.
- */
-static void update_manager(struct drm_plane *plane)
-{
- struct omap_drm_private *priv = plane->dev->dev_private;
- struct omap_plane *omap_plane = to_omap_plane(plane);
- struct omap_overlay *ovl = omap_plane->ovl;
- struct omap_overlay_manager *mgr = NULL;
- int i;
-
- if (plane->crtc) {
- for (i = 0; i < priv->num_encoders; i++) {
- struct drm_encoder *encoder = priv->encoders[i];
- if (encoder->crtc == plane->crtc) {
- mgr = omap_encoder_get_manager(encoder);
- break;
- }
- }
- }
-
- if (ovl->manager != mgr) {
- bool enabled = ovl->is_enabled(ovl);
-
- /* don't switch things around with enabled overlays: */
- if (enabled)
- omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
-
- if (ovl->manager) {
- DBG("disconnecting %s from %s", ovl->name,
- ovl->manager->name);
- ovl->unset_manager(ovl);
- }
-
- if (mgr) {
- DBG("connecting %s to %s", ovl->name, mgr->name);
- ovl->set_manager(ovl, mgr);
- }
-
- if (enabled && mgr)
- omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
- }
-}
-
static void unpin(void *arg, struct drm_gem_object *bo)
{
struct drm_plane *plane = arg;
if (kfifo_put(&omap_plane->unpin_fifo,
(const struct drm_gem_object **)&bo)) {
- omap_plane->pending_num_unpins++;
/* also hold a ref so it isn't free'd while pinned */
drm_gem_object_reference(bo);
} else {
DBG("%p -> %p", pinned_fb, fb);
- mutex_lock(&omap_plane->unpin_mutex);
+ if (fb)
+ drm_framebuffer_reference(fb);
+
ret = omap_framebuffer_replace(pinned_fb, fb, plane, unpin);
- mutex_unlock(&omap_plane->unpin_mutex);
+
+ if (pinned_fb)
+ drm_framebuffer_unreference(pinned_fb);
if (ret) {
dev_err(plane->dev->dev, "could not swap %p -> %p\n",
omap_plane->pinned_fb, fb);
+ if (fb)
+ drm_framebuffer_unreference(fb);
omap_plane->pinned_fb = NULL;
return ret;
}
return 0;
}
-/* update parameters that are dependent on the framebuffer dimensions and
- * position within the fb that this plane scans out from. This is called
- * when framebuffer or x,y base may have changed.
- */
-static void update_scanout(struct drm_plane *plane)
+static void omap_plane_pre_apply(struct omap_drm_apply *apply)
{
- struct omap_plane *omap_plane = to_omap_plane(plane);
- struct omap_overlay_info *info = &omap_plane->info;
+ struct omap_plane *omap_plane =
+ container_of(apply, struct omap_plane, apply);
struct omap_drm_window *win = &omap_plane->win;
+ struct drm_plane *plane = &omap_plane->base;
+ struct drm_device *dev = plane->dev;
+ struct omap_overlay_info *info = &omap_plane->info;
+ struct drm_crtc *crtc = plane->crtc;
+ enum omap_channel channel;
+ bool enabled = omap_plane->enabled && crtc;
+ bool ilace, replication;
int ret;
- ret = update_pin(plane, plane->fb);
- if (ret) {
- dev_err(plane->dev->dev,
- "could not pin fb: %d\n", ret);
- omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+ DBG("%s, enabled=%d", omap_plane->name, enabled);
+
+ /* if fb has changed, pin new fb: */
+ update_pin(plane, enabled ? plane->fb : NULL);
+
+ if (!enabled) {
+ dispc_ovl_enable(omap_plane->id, false);
return;
}
+ channel = omap_crtc_channel(crtc);
+
+ /* update scanout: */
omap_framebuffer_update_scanout(plane->fb, win, info);
- DBG("%s: %d,%d: %08x %08x (%d)", omap_plane->ovl->name,
- win->src_x, win->src_y,
- (u32)info->paddr, (u32)info->p_uv_addr,
+ DBG("%dx%d -> %dx%d (%d)", info->width, info->height,
+ info->out_width, info->out_height,
info->screen_width);
+ DBG("%d,%d %08x %08x", info->pos_x, info->pos_y,
+ info->paddr, info->p_uv_addr);
+
+ /* TODO: */
+ ilace = false;
+ replication = false;
+
+ /* and finally, update omapdss: */
+ ret = dispc_ovl_setup(omap_plane->id, info,
+ replication, omap_crtc_timings(crtc), false);
+ if (ret) {
+ dev_err(dev->dev, "dispc_ovl_setup failed: %d\n", ret);
+ return;
+ }
+
+ dispc_ovl_enable(omap_plane->id, true);
+ dispc_ovl_set_channel_out(omap_plane->id, channel);
+}
+
+static void omap_plane_post_apply(struct omap_drm_apply *apply)
+{
+ struct omap_plane *omap_plane =
+ container_of(apply, struct omap_plane, apply);
+ struct drm_plane *plane = &omap_plane->base;
+ struct omap_overlay_info *info = &omap_plane->info;
+ struct drm_gem_object *bo = NULL;
+ struct callback cb;
+
+ cb = omap_plane->apply_done_cb;
+ omap_plane->apply_done_cb.fxn = NULL;
+
+ while (kfifo_get(&omap_plane->unpin_fifo, &bo)) {
+ omap_gem_put_paddr(bo);
+ drm_gem_object_unreference_unlocked(bo);
+ }
+
+ if (cb.fxn)
+ cb.fxn(cb.arg);
+
+ if (omap_plane->enabled) {
+ omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y,
+ info->out_width, info->out_height);
+ }
+}
+
+static int apply(struct drm_plane *plane)
+{
+ if (plane->crtc) {
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ return omap_crtc_apply(plane->crtc, &omap_plane->apply);
+ }
+ return 0;
}
int omap_plane_mode_set(struct drm_plane *plane,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
+ uint32_t src_w, uint32_t src_h,
+ void (*fxn)(void *), void *arg)
{
struct omap_plane *omap_plane = to_omap_plane(plane);
struct omap_drm_window *win = &omap_plane->win;
win->src_w = src_w >> 16;
win->src_h = src_h >> 16;
- /* note: this is done after this fxn returns.. but if we need
- * to do a commit/update_scanout, etc before this returns we
- * need the current value.
- */
+ if (fxn) {
+ /* omap_crtc should ensure that a new page flip
+ * isn't permitted while there is one pending:
+ */
+ BUG_ON(omap_plane->apply_done_cb.fxn);
+
+ omap_plane->apply_done_cb.fxn = fxn;
+ omap_plane->apply_done_cb.arg = arg;
+ }
+
plane->fb = fb;
plane->crtc = crtc;
- update_scanout(plane);
- update_manager(plane);
-
- return 0;
+ return apply(plane);
}
static int omap_plane_update(struct drm_plane *plane,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
- omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h,
- src_x, src_y, src_w, src_h);
- return omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ omap_plane->enabled = true;
+ return omap_plane_mode_set(plane, crtc, fb,
+ crtc_x, crtc_y, crtc_w, crtc_h,
+ src_x, src_y, src_w, src_h,
+ NULL, NULL);
}
static int omap_plane_disable(struct drm_plane *plane)
static void omap_plane_destroy(struct drm_plane *plane)
{
struct omap_plane *omap_plane = to_omap_plane(plane);
- DBG("%s", omap_plane->ovl->name);
+
+ DBG("%s", omap_plane->name);
+
+ omap_irq_unregister(plane->dev, &omap_plane->error_irq);
+
omap_plane_disable(plane);
drm_plane_cleanup(plane);
- WARN_ON(omap_plane->pending_num_unpins + omap_plane->num_unpins > 0);
+
+ WARN_ON(!kfifo_is_empty(&omap_plane->unpin_fifo));
kfifo_free(&omap_plane->unpin_fifo);
+
kfree(omap_plane);
}
int omap_plane_dpms(struct drm_plane *plane, int mode)
{
struct omap_plane *omap_plane = to_omap_plane(plane);
- struct omap_overlay *ovl = omap_plane->ovl;
- int r;
+ bool enabled = (mode == DRM_MODE_DPMS_ON);
+ int ret = 0;
- DBG("%s: %d", omap_plane->ovl->name, mode);
-
- if (mode == DRM_MODE_DPMS_ON) {
- update_scanout(plane);
- r = commit(plane);
- if (!r)
- r = ovl->enable(ovl);
- } else {
- struct omap_drm_private *priv = plane->dev->dev_private;
- r = ovl->disable(ovl);
- update_pin(plane, NULL);
- queue_work(priv->wq, &omap_plane->work);
+ if (enabled != omap_plane->enabled) {
+ omap_plane->enabled = enabled;
+ ret = apply(plane);
}
- return r;
-}
-
-void omap_plane_on_endwin(struct drm_plane *plane,
- void (*fxn)(void *), void *arg)
-{
- struct omap_plane *omap_plane = to_omap_plane(plane);
-
- mutex_lock(&omap_plane->unpin_mutex);
- omap_plane->endwin.fxn = fxn;
- omap_plane->endwin.arg = arg;
- mutex_unlock(&omap_plane->unpin_mutex);
-
- install_irq(plane);
+ return ret;
}
/* helper to install properties which are common to planes and crtcs */
int ret = -EINVAL;
if (property == priv->rotation_prop) {
- struct omap_overlay *ovl = omap_plane->ovl;
-
- DBG("%s: rotation: %02x", ovl->name, (uint32_t)val);
+ DBG("%s: rotation: %02x", omap_plane->name, (uint32_t)val);
omap_plane->win.rotation = val;
-
- if (ovl->is_enabled(ovl))
- ret = omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
- else
- ret = 0;
+ ret = apply(plane);
} else if (property == priv->zorder_prop) {
- struct omap_overlay *ovl = omap_plane->ovl;
-
- DBG("%s: zorder: %d", ovl->name, (uint32_t)val);
+ DBG("%s: zorder: %02x", omap_plane->name, (uint32_t)val);
omap_plane->info.zorder = val;
-
- if (ovl->is_enabled(ovl))
- ret = omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
- else
- ret = 0;
+ ret = apply(plane);
}
return ret;
.set_property = omap_plane_set_property,
};
+static void omap_plane_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus)
+{
+ struct omap_plane *omap_plane =
+ container_of(irq, struct omap_plane, error_irq);
+ DRM_ERROR("%s: errors: %08x\n", omap_plane->name, irqstatus);
+}
+
+static const char *plane_names[] = {
+ [OMAP_DSS_GFX] = "gfx",
+ [OMAP_DSS_VIDEO1] = "vid1",
+ [OMAP_DSS_VIDEO2] = "vid2",
+ [OMAP_DSS_VIDEO3] = "vid3",
+};
+
+static const uint32_t error_irqs[] = {
+ [OMAP_DSS_GFX] = DISPC_IRQ_GFX_FIFO_UNDERFLOW,
+ [OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_FIFO_UNDERFLOW,
+ [OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_FIFO_UNDERFLOW,
+ [OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_FIFO_UNDERFLOW,
+};
+
/* initialize plane */
struct drm_plane *omap_plane_init(struct drm_device *dev,
- struct omap_overlay *ovl, unsigned int possible_crtcs,
- bool priv)
+ int id, bool private_plane)
{
+ struct omap_drm_private *priv = dev->dev_private;
struct drm_plane *plane = NULL;
struct omap_plane *omap_plane;
+ struct omap_overlay_info *info;
int ret;
- DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name,
- possible_crtcs, priv);
-
- /* friendly reminder to update table for future hw: */
- WARN_ON(ovl->id >= ARRAY_SIZE(id2irq));
+ DBG("%s: priv=%d", plane_names[id], private_plane);
omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL);
if (!omap_plane) {
goto fail;
}
- mutex_init(&omap_plane->unpin_mutex);
-
ret = kfifo_alloc(&omap_plane->unpin_fifo, 16, GFP_KERNEL);
if (ret) {
dev_err(dev->dev, "could not allocate unpin FIFO\n");
goto fail;
}
- INIT_WORK(&omap_plane->work, unpin_worker);
-
omap_plane->nformats = omap_framebuffer_get_formats(
omap_plane->formats, ARRAY_SIZE(omap_plane->formats),
- ovl->supported_modes);
- omap_plane->ovl = ovl;
+ dss_feat_get_supported_color_modes(id));
+ omap_plane->id = id;
+ omap_plane->name = plane_names[id];
+
plane = &omap_plane->base;
- drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs,
- omap_plane->formats, omap_plane->nformats, priv);
+ omap_plane->apply.pre_apply = omap_plane_pre_apply;
+ omap_plane->apply.post_apply = omap_plane_post_apply;
+
+ omap_plane->error_irq.irqmask = error_irqs[id];
+ omap_plane->error_irq.irq = omap_plane_error_irq;
+ omap_irq_register(dev, &omap_plane->error_irq);
+
+ drm_plane_init(dev, plane, (1 << priv->num_crtcs) - 1, &omap_plane_funcs,
+ omap_plane->formats, omap_plane->nformats, private_plane);
omap_plane_install_properties(plane, &plane->base);
/* get our starting configuration, set defaults for parameters
* we don't currently use, etc:
*/
- ovl->get_overlay_info(ovl, &omap_plane->info);
- omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA;
- omap_plane->info.rotation = OMAP_DSS_ROT_0;
- omap_plane->info.global_alpha = 0xff;
- omap_plane->info.mirror = 0;
+ info = &omap_plane->info;
+ info->rotation_type = OMAP_DSS_ROT_DMA;
+ info->rotation = OMAP_DSS_ROT_0;
+ info->global_alpha = 0xff;
+ info->mirror = 0;
/* Set defaults depending on whether we are a CRTC or overlay
* layer.
* TODO add ioctl to give userspace an API to change this.. this
* will come in a subsequent patch.
*/
- if (priv)
+ if (private_plane)
omap_plane->info.zorder = 0;
else
- omap_plane->info.zorder = ovl->id;
-
- update_manager(plane);
+ omap_plane->info.zorder = id;
return plane;
dma_tmp = pci_map_single(pdev, buf, bufsize * sizeof(u8),
PCI_DMA_FROMDEVICE);
-
+ if (pci_dma_mapping_error(pdev, dma_tmp))
+ return -1;
if (-1 == buffer_add(&(priv->rxbuffer), buf, dma_tmp,
&(priv->rxbufferhead))) {
DMESGE("Unable to allocate mem RX buf");
pTxFwInfo->TxRate,
cb_desc);
+ if (pci_dma_mapping_error(priv->pdev, mapping))
+ RT_TRACE(COMP_ERR, "DMA Mapping error\n");;
if (cb_desc->bAMPDUEnable) {
pTxFwInfo->AllowAggregation = 1;
pTxFwInfo->RxMF = cb_desc->ampdu_factor;
dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(priv->pdev, mapping))
+ RT_TRACE(COMP_ERR, "DMA Mapping error\n");;
memset(entry, 0, 12);
entry->LINIP = cb_desc->bLastIniPkt;
entry->FirstSeg = 1;
skb_tail_pointer_rsl(skb),
priv->rxbuffersize,
PCI_DMA_FROMDEVICE);
-
+ if (pci_dma_mapping_error(priv->pdev, *mapping)) {
+ dev_kfree_skb_any(skb);
+ return -1;
+ }
entry->BufferAddress = cpu_to_le32(*mapping);
entry->Length = priv->rxbuffersize;
skb_tail_pointer_rsl(skb),
priv->rxbuffersize,
PCI_DMA_FROMDEVICE);
-
+ if (pci_dma_mapping_error(priv->pdev,
+ *((dma_addr_t *)skb->cb))) {
+ dev_kfree_skb_any(skb);
+ return;
+ }
}
done:
pdesc->BufferAddress = cpu_to_le32(*((dma_addr_t *)skb->cb));
{USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
/* Belkin */
{USB_DEVICE(0x050D, 0x945A)},
+ /* ISY IWL - Belkin clone */
+ {USB_DEVICE(0x050D, 0x11F1)},
/* Corega */
{USB_DEVICE(0x07AA, 0x0047)},
/* D-Link */
tristate "SystemBase PCI Multiport UART"
select SERIAL_CORE
depends on PCI
+ depends on X86
help
A driver for the SystemBase Multi-2/PCI serial card
sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16);
}
break;
+#ifdef CONFIG_PARPORT_PC
case PCI_DEVICE_ID_MP2S1P :
sbdev->nr_ports = 2;
/* add PC compatible parallel port */
parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0);
break;
+#endif
}
ret = request_region(sbdev->uart_access_addr, (8*sbdev->nr_ports), sbdev->name);
mutex_lock(&spk_mutex);
/* First, check if we already have it loaded. */
- for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++)
+ for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++)
if (strcmp(synths[i]->name, synth_name) == 0)
synth = synths[i];
int i;
int status = 0;
mutex_lock(&spk_mutex);
- for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++)
+ for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++)
/* synth_remove() is responsible for rotating the array down */
if (in_synth == synths[i]) {
mutex_unlock(&spk_mutex);
* driver should read or write to PRM/CM registers directly; they
* should rely on OMAP core code to do this.
*/
-#include <mach-omap2/cm2xxx_3xxx.h>
+#include <mach-omap2/cm3xxx.h>
#include <mach-omap2/prm-regbits-34xx.h>
#include <mach-omap2/cm-regbits-34xx.h>
#include <dspbridge/devdefs.h>
for (i = 0; i < DM_TIMER_CLOCKS; i++)
omap_dm_timer_free(timer[i]);
+ clk_unprepare(iva2_clk);
clk_put(iva2_clk);
+ clk_unprepare(ssi.sst_fck);
clk_put(ssi.sst_fck);
+ clk_unprepare(ssi.ssr_fck);
clk_put(ssi.ssr_fck);
+ clk_unprepare(ssi.ick);
clk_put(ssi.ick);
}
iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck");
if (IS_ERR(iva2_clk))
dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk);
+ else
+ clk_prepare(iva2_clk);
ssi.sst_fck = clk_get(&dspbridge_device.dev, "ssi_sst_fck");
ssi.ssr_fck = clk_get(&dspbridge_device.dev, "ssi_ssr_fck");
ssi.ick = clk_get(&dspbridge_device.dev, "ssi_ick");
- if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick))
+ if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick)) {
dev_err(bridge, "failed to get ssi: sst %p, ssr %p, ick %p\n",
ssi.sst_fck, ssi.ssr_fck, ssi.ick);
+ } else {
+ clk_prepare(ssi.sst_fck);
+ clk_prepare(ssi.ssr_fck);
+ clk_prepare(ssi.ick);
+ }
}
/**
dsp_wdt.fclk = clk_get(NULL, "wdt3_fck");
if (!IS_ERR(dsp_wdt.fclk)) {
+ clk_prepare(dsp_wdt.fclk);
+
dsp_wdt.iclk = clk_get(NULL, "wdt3_ick");
if (IS_ERR(dsp_wdt.iclk)) {
clk_put(dsp_wdt.fclk);
dsp_wdt.fclk = NULL;
ret = -EFAULT;
+ } else {
+ clk_prepare(dsp_wdt.iclk);
}
} else
ret = -EFAULT;
free_irq(INT_34XX_WDT3_IRQ, &dsp_wdt);
tasklet_kill(&dsp_wdt.wdt3_tasklet);
- if (dsp_wdt.fclk)
+ if (dsp_wdt.fclk) {
+ clk_unprepare(dsp_wdt.fclk);
clk_put(dsp_wdt.fclk);
- if (dsp_wdt.iclk)
+ }
+ if (dsp_wdt.iclk) {
+ clk_unprepare(dsp_wdt.iclk);
clk_put(dsp_wdt.iclk);
+ }
dsp_wdt.fclk = NULL;
dsp_wdt.iclk = NULL;
static int __init pio2_init(void)
{
- int retval = 0;
-
if (bus_num == 0) {
pr_err("No cards, skipping registration\n");
- goto err_nocard;
+ return -ENODEV;
}
if (bus_num > PIO2_CARDS_MAX) {
}
/* Register the PIO2 driver */
- retval = vme_register_driver(&pio2_driver, bus_num);
- if (retval != 0)
- goto err_reg;
-
- return retval;
-
-err_reg:
-err_nocard:
- return retval;
+ return vme_register_driver(&pio2_driver, bus_num);
}
static int pio2_match(struct vme_dev *vdev)
} SRSNCapObject, *PSRSNCapObject;
// BSS info(AP)
-#pragma pack(1)
typedef struct tagKnownBSS {
// BSS info
BOOL bActive;
#include "device.h"
/*--------------------- Export Definitions -------------------------*/
-#pragma pack(1)
typedef struct tagSINTData {
BYTE byTSR0;
BYTE byPkt0;
// Ioctl interface structure
// Command structure
//
-#pragma pack(1)
typedef struct tagSCmdRequest {
u8 name[16];
void *data;
u16 wResult;
u16 wCmdCode;
-} SCmdRequest, *PSCmdRequest;
+} __packed SCmdRequest, *PSCmdRequest;
//
// Scan
u8 ssid[SSID_MAXLEN + 2];
-} SCmdScan, *PSCmdScan;
+} __packed SCmdScan, *PSCmdScan;
//
// BSS Join
BOOL bPSEnable;
BOOL bShareKeyAuth;
-} SCmdBSSJoin, *PSCmdBSSJoin;
+} __packed SCmdBSSJoin, *PSCmdBSSJoin;
//
// Zonetype Setting
BOOL bWrite;
WZONETYPE ZoneType;
-} SCmdZoneTypeSet, *PSCmdZoneTypeSet;
+} __packed SCmdZoneTypeSet, *PSCmdZoneTypeSet;
typedef struct tagSWPAResult {
char ifname[100];
u8 key_mgmt;
u8 eap_type;
BOOL authenticated;
-} SWPAResult, *PSWPAResult;
+} __packed SWPAResult, *PSWPAResult;
typedef struct tagSCmdStartAP {
BOOL bShareKeyAuth;
u8 byBasicRate;
-} SCmdStartAP, *PSCmdStartAP;
+} __packed SCmdStartAP, *PSCmdStartAP;
typedef struct tagSCmdSetWEP {
BOOL bWepKeyAvailable[WEP_NKEYS];
u32 auWepKeyLength[WEP_NKEYS];
-} SCmdSetWEP, *PSCmdSetWEP;
+} __packed SCmdSetWEP, *PSCmdSetWEP;
typedef struct tagSBSSIDItem {
BOOL bWEPOn;
u32 uRSSI;
-} SBSSIDItem;
+} __packed SBSSIDItem;
typedef struct tagSBSSIDList {
u32 uItem;
SBSSIDItem sBSSIDList[0];
-} SBSSIDList, *PSBSSIDList;
+} __packed SBSSIDList, *PSBSSIDList;
typedef struct tagSNodeItem {
u32 uTxAttempts;
u16 wFailureRatio;
-} SNodeItem;
+} __packed SNodeItem;
typedef struct tagSNodeList {
u32 uItem;
SNodeItem sNodeList[0];
-} SNodeList, *PSNodeList;
+} __packed SNodeList, *PSNodeList;
typedef struct tagSCmdLinkStatus {
u32 uChannel;
u32 uLinkRate;
-} SCmdLinkStatus, *PSCmdLinkStatus;
+} __packed SCmdLinkStatus, *PSCmdLinkStatus;
//
// 802.11 counter
u32 ReceivedFragmentCount;
u32 MulticastReceivedFrameCount;
u32 FCSErrorCount;
-} SDot11MIBCount, *PSDot11MIBCount;
+} __packed SDot11MIBCount, *PSDot11MIBCount;
u32 ullTxBroadcastBytes[2];
u32 ullTxMulticastBytes[2];
u32 ullTxDirectedBytes[2];
-} SStatMIBCount, *PSStatMIBCount;
+} __packed SStatMIBCount, *PSStatMIBCount;
typedef struct tagSCmdValue {
u32 dwValue;
-} SCmdValue, *PSCmdValue;
+} __packed SCmdValue, *PSCmdValue;
//
// hostapd & viawget ioctl related
u8 ssid[32];
} scan_req;
} u;
-};
+} __packed;
/*--------------------- Export Classes ----------------------------*/
-#pragma pack(1)
typedef struct viawget_wpa_header {
u8 type;
u16 req_ie_len;
u16 resp_ie_len;
-} viawget_wpa_header;
+} __packed viawget_wpa_header;
struct viawget_wpa_param {
u32 cmd;
u8 *buf;
} scan_results;
} u;
-};
+} __packed;
-#pragma pack(1)
struct viawget_scan_result {
u8 bssid[6];
u8 ssid[32];
int noise;
int level;
int maxrate;
-};
+} __packed;
/*--------------------- Export Classes ----------------------------*/
}
-int prism2_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type,
- int mbm)
+int prism2_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+ enum nl80211_tx_power_setting type, int mbm)
{
struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
wlandevice_t *wlandev = priv->wlandev;
return err;
}
-int prism2_get_tx_power(struct wiphy *wiphy, int *dbm)
+int prism2_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+ int *dbm)
{
struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
wlandevice_t *wlandev = priv->wlandev;
/* SSID */
req->ssid.status = P80211ENUM_msgitem_status_data_ok;
req->ssid.data.len = le16_to_cpu(item->ssid.len);
- req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_BSSID_LEN);
+ req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN);
memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
/* supported rates */
static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
int offset)
{
- int ret;
+ int ret = 0;
size_t clen;
unsigned long handle;
struct page *page;
goto out;
}
ret = zram_decompress_page(zram, uncmem, index);
- if (ret) {
- kfree(uncmem);
+ if (ret)
goto out;
- }
}
/*
user_mem = kmap_atomic(page);
- if (is_partial_io(bvec))
+ if (is_partial_io(bvec)) {
memcpy(uncmem + offset, user_mem + bvec->bv_offset,
bvec->bv_len);
- else
+ kunmap_atomic(user_mem);
+ user_mem = NULL;
+ } else {
uncmem = user_mem;
+ }
if (page_zero_filled(uncmem)) {
- kunmap_atomic(user_mem);
- if (is_partial_io(bvec))
- kfree(uncmem);
+ if (!is_partial_io(bvec))
+ kunmap_atomic(user_mem);
zram_stat_inc(&zram->stats.pages_zero);
zram_set_flag(zram, index, ZRAM_ZERO);
ret = 0;
ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen,
zram->compress_workmem);
- kunmap_atomic(user_mem);
- if (is_partial_io(bvec))
- kfree(uncmem);
+ if (!is_partial_io(bvec)) {
+ kunmap_atomic(user_mem);
+ user_mem = NULL;
+ uncmem = NULL;
+ }
if (unlikely(ret != LZO_E_OK)) {
pr_err("Compression failed! err=%d\n", ret);
if (unlikely(clen > max_zpage_size)) {
zram_stat_inc(&zram->stats.bad_compress);
- src = uncmem;
clen = PAGE_SIZE;
+ src = NULL;
+ if (is_partial_io(bvec))
+ src = uncmem;
}
handle = zs_malloc(zram->mem_pool, clen);
}
cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_WO);
+ if ((clen == PAGE_SIZE) && !is_partial_io(bvec))
+ src = kmap_atomic(page);
memcpy(cmem, src, clen);
+ if ((clen == PAGE_SIZE) && !is_partial_io(bvec))
+ kunmap_atomic(src);
zs_unmap_object(zram->mem_pool, handle);
if (clen <= PAGE_SIZE / 2)
zram_stat_inc(&zram->stats.good_compress);
- return 0;
-
out:
+ if (is_partial_io(bvec))
+ kfree(uncmem);
+
if (ret)
zram_stat64_inc(zram, &zram->stats.failed_writes);
return ret;
* made generic here.
*/
if (!(cmd->cmd_flags & ICF_OOO_CMDSN) && !cmd->immediate_cmd &&
- iscsi_sna_gte(cmd->stat_sn, conn->sess->exp_cmd_sn)) {
+ iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) {
list_del(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_cmd(cmd);
struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, *l_tg_pt_gp_mem;
unsigned char *buf;
unsigned char *ptr;
- sense_reason_t rc;
+ sense_reason_t rc = TCM_NO_SENSE;
u32 len = 4; /* Skip over RESERVED area in header */
int alua_access_state, primary = 0;
u16 tg_pt_id, rtpi;
/* Used for APTPL metadata w/ UNREGISTER */
unsigned char *pr_aptpl_buf = NULL;
unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
- sense_reason_t ret;
+ sense_reason_t ret = TCM_NO_SENSE;
int pr_holder = 0, type;
if (!se_sess || !se_lun) {
void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
{
- if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB))
- transport_lun_remove_cmd(cmd);
-
if (transport_cmd_check_stop_to_fabric(cmd))
return;
if (remove)
se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
se_cmd->se_tfo->queue_tm_rsp(se_cmd);
+
+ transport_cmd_check_stop_to_fabric(se_cmd);
}
/**
}
cmd->t_state = TRANSPORT_PROCESSING;
+ cmd->transport_state |= CMD_T_ACTIVE;
spin_unlock_irq(&cmd->t_state_lock);
if (!target_handle_task_attr(cmd))
* SENSE KEY values from include/scsi/scsi.h
*/
switch (reason) {
+ case TCM_NO_SENSE:
+ /* CURRENT ERROR */
+ buffer[0] = 0x70;
+ buffer[SPC_ADD_SENSE_LEN_OFFSET] = 10;
+ /* Not Ready */
+ buffer[SPC_SENSE_KEY_OFFSET] = NOT_READY;
+ /* NO ADDITIONAL SENSE INFORMATION */
+ buffer[SPC_ASC_KEY_OFFSET] = 0;
+ buffer[SPC_ASCQ_KEY_OFFSET] = 0;
+ break;
case TCM_NON_EXISTENT_LUN:
/* CURRENT ERROR */
buffer[0] = 0x70;
/* ILLEGAL REQUEST */
buffer[SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
/* LOGICAL UNIT COMMUNICATION FAILURE */
- buffer[SPC_ASC_KEY_OFFSET] = 0x80;
+ buffer[SPC_ASC_KEY_OFFSET] = 0x08;
break;
}
/*
}
cmd->scsi_status = SAM_STAT_TASK_ABORTED;
+ transport_lun_remove_cmd(cmd);
+
pr_debug("Setting SAM_STAT_TASK_ABORTED status for CDB: 0x%02x,"
" ITT: 0x%08x\n", cmd->t_task_cdb[0],
cmd->se_tfo->get_task_tag(cmd));
tport = ft_tport_create(rdata->local_port);
if (!tport)
- return 0; /* not a target for this local port */
+ goto not_target; /* not a target for this local port */
acl = ft_acl_get(tport->tpg, rdata);
if (!acl)
- return 0;
+ goto not_target; /* no target for this remote */
if (!rspp)
goto fill;
/*
* OR in our service parameters with other provider (initiator), if any.
- * TBD XXX - indicate RETRY capability?
*/
fill:
fcp_parm = ntohl(spp->spp_params);
+ fcp_parm &= ~FCP_SPPF_RETRY;
spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN);
return FC_SPP_RESP_ACK;
+
+not_target:
+ fcp_parm = ntohl(spp->spp_params);
+ fcp_parm &= ~FCP_SPPF_TARG_FCN;
+ spp->spp_params = htonl(fcp_parm);
+ return 0;
}
/**
return pty_get_pktmode(tty, (int __user *)arg);
case TIOCSIG: /* Send signal to other side of pty */
return pty_signal(tty, (int) arg);
+ case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */
+ return -EINVAL;
}
return -ENOIOCTLCMD;
}
UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
.flags = UART_CAP_FIFO,
},
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
[PORT_8250_CIR] = {
.name = "CIR port"
}
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* Clear the USR and write the LCR again. */
(void)p->serial_in(p, UART_USR);
- p->serial_out(p, d->last_lcr, UART_LCR);
+ p->serial_out(p, UART_LCR, d->last_lcr);
return 1;
}
return setup_port(priv, port, 2, idx * 8, 0);
}
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ int ret = pci_default_setup(priv, board, port, idx);
+
+ port->port.type = PORT_BRCM_TRUMANAGE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ return ret;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
#define PCI_VENDOR_ID_AGESTAR 0x5372
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
#define PCI_VENDOR_ID_ASIX 0x9710
-#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020
#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
+ /*
+ * Broadcom TruManage (NetXtreme)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_brcm_trumanage_setup,
+ },
+
/*
* Default "match everything" terminator entry
*/
pbn_ce4100_1_115200,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
+ pbn_brcm_trumanage,
};
/*
[pbn_b0_8_1152000_200] = {
.flags = FL_BASE0,
- .num_ports = 2,
+ .num_ports = 8,
.base_baud = 1152000,
.uart_offset = 0x200,
},
.num_ports = 2,
.base_baud = 115200,
},
+ [pbn_brcm_trumanage] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .reg_shift = 2,
+ .base_baud = 115200,
+ },
};
static const struct pci_device_id blacklist[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_omegapci },
+ /*
+ * Broadcom TruManage
+ */
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_brcm_trumanage },
+
/*
* AgeStar as-prs2-009
*/
clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
mrdy_set_low(ifx_dev);
+ del_timer(&ifx_dev->spi_timer);
clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
tasklet_kill(&ifx_dev->io_work_tasklet);
}
ifx_dev->spi_xfer.cs_change = 0;
ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
/* ifx_dev->spi_xfer.speed_hz = 390625; */
- ifx_dev->spi_xfer.bits_per_word = spi_bpw;
+ ifx_dev->spi_xfer.bits_per_word =
+ ifx_dev->spi_dev->bits_per_word;
ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
struct circ_buf *xmit = &s->port.state->xmit;
if (auart_dma_enabled(s)) {
- int i = 0;
+ u32 i = 0;
int size;
void *buffer = s->tx_dma_buf;
u32 ctrl = readl(u->membase + AUART_CTRL2);
- ctrl &= ~AUART_CTRL2_RTSEN;
+ ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
if (mctrl & TIOCM_RTS) {
if (tty_port_cts_enabled(&u->state->port))
ctrl |= AUART_CTRL2_RTSEN;
+ else
+ ctrl |= AUART_CTRL2_RTS;
}
s->ctrl = mctrl;
ucon &= ucon_mask;
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (vt8500_port->clk) {
+ if (!IS_ERR(vt8500_port->clk)) {
vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
} else {
/* use the default of 24Mhz if not specified and warn */
default y if ARCH_W90X900
default y if ARCH_AT91
default y if ARCH_MXC
+ default y if ARCH_MXS
default y if ARCH_OMAP3
default y if ARCH_CNS3XXX
default y if ARCH_VT8500
else
ci->hcd = hcd;
+ if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+ hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
return ret;
}
{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
.driver_info = NO_UNION_NORMAL,
},
+ { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+ .driver_info = NO_UNION_NORMAL,
+ },
{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
return ret;
}
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+ unsigned int link_status)
+{
+ return set_port_feature(hub->hdev,
+ port1 | (link_status << 3),
+ USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects. This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+ int ret;
+ int total_time;
+ u16 portchange, portstatus;
+
+ if (!hub_is_superspeed(hub->hdev))
+ return -EINVAL;
+
+ ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+ if (ret) {
+ dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+ port1, ret);
+ return ret;
+ }
+
+ /* Wait for the link to enter the disabled state. */
+ for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (ret < 0)
+ return ret;
+
+ if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_DISABLED)
+ break;
+ if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+ break;
+ msleep(HUB_DEBOUNCE_STEP);
+ }
+ if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+ dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+ port1, total_time);
+
+ return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
struct usb_device *hdev = hub->hdev;
if (hub->ports[port1 - 1]->child && set_state)
usb_set_device_state(hub->ports[port1 - 1]->child,
USB_STATE_NOTATTACHED);
- if (!hub->error && !hub_is_superspeed(hub->hdev))
- ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev))
+ ret = hub_usb3_port_disable(hub, port1);
+ else
+ ret = clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
if (ret)
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
port1, ret);
#define HUB_SHORT_RESET_TIME 10
#define HUB_BH_RESET_TIME 50
#define HUB_LONG_RESET_TIME 200
-#define HUB_RESET_TIMEOUT 500
+#define HUB_RESET_TIMEOUT 800
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
if (ret < 0)
return ret;
+ /* The port state is unknown until the reset completes. */
+ if ((portstatus & USB_PORT_STAT_RESET))
+ goto delay;
+
/*
* Some buggy devices require a warm reset to be issued even
* when the port appears not to be connected.
if ((portchange & USB_PORT_STAT_C_CONNECTION))
return -ENOTCONN;
- /* if we`ve finished resetting, then break out of
- * the loop
- */
- if (!(portstatus & USB_PORT_STAT_RESET) &&
- (portstatus & USB_PORT_STAT_ENABLE)) {
+ if ((portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
else if (hub_is_superspeed(hub->hdev))
return 0;
}
} else {
- if (portchange & USB_PORT_STAT_C_BH_RESET)
- return 0;
+ if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+ hub_port_warm_reset_required(hub,
+ portstatus))
+ return -ENOTCONN;
+
+ return 0;
}
+delay:
/* switch to the long delay after two short delay failures */
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
msleep(10 + 40);
update_devnum(udev, 0);
hcd = bus_to_hcd(udev->bus);
- if (hcd->driver->reset_device) {
- *status = hcd->driver->reset_device(hcd, udev);
- if (*status < 0) {
- dev_err(&udev->dev, "Cannot reset "
- "HCD device state\n");
- break;
- }
- }
+ /* The xHC may think the device is already reset,
+ * so ignore the status.
+ */
+ if (hcd->driver->reset_device)
+ hcd->driver->reset_device(hcd, udev);
}
/* FALL THROUGH */
case -ENOTCONN:
clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_C_RESET);
/* FIXME need disconnect() for NOTATTACHED device */
- if (warm) {
+ if (hub_is_superspeed(hub->hdev)) {
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
- } else {
+ }
+ if (!warm)
usb_set_device_state(udev, *status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
- }
break;
}
}
static int finish_port_resume(struct usb_device *udev)
{
int status = 0;
- u16 devstatus;
+ u16 devstatus = 0;
/* caller owns the udev device lock */
dev_dbg(&udev->dev, "%s\n",
if (status) {
dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
status);
- } else if (udev->actconfig) {
+ /*
+ * There are a few quirky devices which violate the standard
+ * by claiming to have remote wakeup enabled after a reset,
+ * which crash if the feature is cleared, hence check for
+ * udev->reset_resume
+ */
+ } else if (udev->actconfig && !udev->reset_resume) {
le16_to_cpus(&devstatus);
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
status = usb_control_msg(udev,
* SS.Inactive state.
*/
if (hub_port_warm_reset_required(hub, portstatus)) {
+ int status;
+
dev_dbg(hub_dev, "warm reset port %d\n", i);
- hub_port_reset(hub, i, NULL,
+ status = hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
+ if (status < 0)
+ hub_port_disable(hub, i, 1);
+ connect_change = 0;
}
if (connect_change)
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Microsoft LifeCam-VX700 v2.0 */
+ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
#define dump_register(nm) \
{ \
.name = __stringify(nm), \
- .offset = DWC3_ ##nm, \
+ .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \
}
static const struct debugfs_reg32 dwc3_regs[] = {
}
if (!pdev->irq) {
- dev_err(&dev->pdev->dev, "irq not set\n");
+ dev_err(&pdev->dev, "irq not set\n");
kfree(dev);
dev = NULL;
retval = -ENODEV;
dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
- dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
+ dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
kfree(dev);
dev = NULL;
retval = -EBUSY;
static const char *const ep_name[] = {
ep0name, /* everyone has ep0 */
- /* act like a net2280: high speed, six configurable endpoints */
- "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
-
- /* or like pxa250: fifteen fixed function endpoints */
+ /* act like a pxa250: fifteen fixed function endpoints */
"ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
"ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
"ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
/* or like sa1100: two fixed function endpoints */
"ep1out-bulk", "ep2in-bulk",
+
+ /* and now some generic EPs so we have enough in multi config */
+ "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
+ "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
};
#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
unsigned int i;
for (i = 0; i < udc->clknum; i++)
- clk_enable(udc->clk[i]);
+ clk_prepare_enable(udc->clk[i]);
}
static void udc_clock_disable(struct mv_udc *udc)
unsigned int i;
for (i = 0; i < udc->clknum; i++)
- clk_disable(udc->clk[i]);
+ clk_disable_unprepare(udc->clk[i]);
}
static void udc_stop(struct mv_udc *udc)
/**
* s3c_hsotg_release - release callback for hsotg device
* @dev: Device to for which release is called
+ *
+ * Nothing to do as the resource is allocated using devm_ API.
*/
static void s3c_hsotg_release(struct device *dev)
{
- struct s3c_hsotg *hsotg = dev_get_drvdata(dev);
-
- kfree(hsotg);
}
/**
tpg->tpg_nexus = NULL;
kfree(tv_nexus);
+ ret = 0;
out:
mutex_unlock(&tpg->tpg_mutex);
- return 0;
+ return ret;
}
static ssize_t tcm_usbg_tpg_store_nexus(
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
- wake_up_interruptible(&port->port.close_wait);
+ wake_up(&port->port.close_wait);
exit:
spin_unlock_irq(&port->port_lock);
}
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
- if (pdata->controller_ver) {
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL,
ULPI_PHY_CLK_SEL);
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
- if (pdata->controller_ver) {
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
break;
}
- if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
+ if (pdata->have_sysif_regs && pdata->controller_ver &&
+ (phy_mode == FSL_USB2_PHY_ULPI)) {
/* check PHY_CLK_VALID to get phy clk valid */
if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
- if (phy_mode != FSL_USB2_PHY_ULPI)
+ if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
return 0;
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
- clk_enable(ehci_mv->clk[i]);
+ clk_prepare_enable(ehci_mv->clk[i]);
}
static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
- clk_disable(ehci_mv->clk[i]);
+ clk_disable_unprepare(ehci_mv->clk[i]);
}
static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
break;
}
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if (((temp >> 13) & 7) == 1) {
+ u32 hcs_params = ehci_readl(ehci,
+ &ehci->caps->hcs_params);
+
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = ehci_readl(ehci, &ehci->debug->control);
+ ehci_info(ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(hcs_params),
+ (temp & DBGP_ENABLED) ? " IN USE" : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
retval = ehci_setup(hcd);
if (retval)
return retval;
break;
}
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability(pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = ehci_readl(ehci, &ehci->debug->control);
- ehci_info(ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
-
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
temp &= 0x0f;
return ver;
}
+ if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
+ return FSL_USB_VER_OLD;
+
if (of_device_is_compatible(np, "fsl-usb2-mph")) {
if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
ver = FSL_USB_VER_1_6;
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include "imx21-hcd.h"
tmio_iowrite8(2, tmio->ccr + CCR_INTC);
dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
- tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
+ tmio_ioread8(tmio->ccr + CCR_REVID),
+ (u64) hcd->rsrc_start, hcd->irq);
}
static int ohci_tmio_start(struct usb_hcd *hcd)
break;
case USB_PORT_FEAT_LINK_STATE:
temp = xhci_readl(xhci, port_array[wIndex]);
+
+ /* Disable port */
+ if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+ xhci_dbg(xhci, "Disable port %d\n", wIndex);
+ temp = xhci_port_state_to_neutral(temp);
+ /*
+ * Clear all change bits, so that we get a new
+ * connection event.
+ */
+ temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+ PORT_OCC | PORT_RC | PORT_PLC |
+ PORT_CEC;
+ xhci_writel(xhci, temp | PORT_PE,
+ port_array[wIndex]);
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
+ }
+
+ /* Put link in RxDetect (enable port) */
+ if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+ xhci_dbg(xhci, "Enable port %d\n", wIndex);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ link_state);
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
+ }
+
/* Software should not attempt to set
- * port link state above '5' (Rx.Detect) and the port
+ * port link state above '3' (U3) and the port
* must be enabled.
*/
if ((temp & PORT_PE) == 0 ||
- (link_state > USB_SS_PORT_LS_RX_DETECT)) {
+ (link_state > USB_SS_PORT_LS_U3)) {
xhci_warn(xhci, "Cannot set link state.\n");
goto error;
}
int max_ports;
__le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
+ bool reset_change = false;
max_ports = xhci_get_ports(hcd, &port_array);
bus_state = &xhci->bus_state[hcd_index(hcd)];
buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
status = 1;
}
+ if ((temp & PORT_RC))
+ reset_change = true;
+ }
+ if (!status && !reset_change) {
+ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
}
spin_unlock_irqrestore(&xhci->lock, flags);
return status ? retval : 0;
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
+ if (ep->desc.bInterval == 0)
+ return 0;
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval, 0, 15);
}
if (bogus_port_status)
return;
+ /*
+ * xHCI port-status-change events occur when the "or" of all the
+ * status-change bits in the portsc register changes from 0 to 1.
+ * New status changes won't cause an event if any other change
+ * bits are still set. When an event occurs, switch over to
+ * polling to avoid losing status changes.
+ */
+ xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
usb_hcd_poll_rh_status(hcd);
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
+ /* Don't poll the roothubs on bus suspend. */
+ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
compliance_mode_recovery_timer_init(xhci);
+ /* Re-enable port polling. */
+ xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
+
return retval;
}
#endif /* CONFIG_PM */
if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
break;
retval = 0;
- dev_info(&intf->dev, "TEST 17: unlink from %d queues of "
+ dev_info(&intf->dev, "TEST 24: unlink from %d queues of "
"%d %d-byte writes\n",
param->iterations, param->sglen, param->length);
for (i = param->iterations; retval == 0 && i > 0; --i) {
if (usb_disabled())
return 0;
- pr_info("%s: version " MUSB_VERSION ", "
- "?dma?"
- ", "
- "otg (peripheral+host)",
+ pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
musb_driver_name);
return platform_driver_register(&musb_driver);
}
DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
};
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+
/**
* musb_dsps_phy_control - phy on/off
* @glue: struct dsps_glue *
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help
unsigned int i;
for (i = 0; i < mvotg->clknum; i++)
- clk_enable(mvotg->clk[i]);
+ clk_prepare_enable(mvotg->clk[i]);
}
static void otg_clock_disable(struct mv_otg *mvotg)
unsigned int i;
for (i = 0; i < mvotg->clknum; i++)
- clk_disable(mvotg->clk[i]);
+ clk_disable_unprepare(mvotg->clk[i]);
}
static int mv_otg_enable_internal(struct mv_otg *mvotg)
return 0;
}
-static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv)
-{
- int i;
- struct usbhsg_uep *uep;
-
- usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
- uep->pipe = NULL;
-}
-
/*
*
* usb_ep_ops
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
- return usbhsg_pipe_disable(uep);
+ usbhsg_pipe_disable(uep);
+
+ uep->pipe->mod_private = NULL;
+ uep->pipe = NULL;
+
+ return 0;
}
static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
usbhs_pipe_init(priv,
usbhsg_dma_map_ctrl);
usbhs_fifo_init(priv);
- usbhsg_uep_init(gpriv);
- /* dcp init */
+ /* dcp init instead of usbhsg_ep_enable() */
dcp->pipe = usbhs_dcp_malloc(priv);
dcp->pipe->mod_private = dcp;
usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
usbhs_sys_set_test_mode(priv, 0);
usbhs_sys_function_ctrl(priv, 0);
- usbhsg_pipe_disable(dcp);
+ usbhsg_ep_disable(&dcp->ep);
dev_dbg(dev, "stop gadget\n");
*/
usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
uep->gpriv = gpriv;
+ uep->pipe = NULL;
snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
uep->ep.name = uep->ep_name;
status = -ESHUTDOWN;
urb->actual_length = pkt->actual;
- usbhsh_ureq_free(hpriv, ureq);
usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
+ usbhsh_ureq_free(hpriv, ureq);
+
usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
usb_hcd_unlink_urb_from_ep(hcd, urb);
{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+ /* Crucible Devices */
+ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
* ATI command output: Cinterion MC55i
*/
#define FTDI_CINTERION_MC55I_PID 0xA951
+
+/*
+ * Product: Comet Caller ID decoder
+ * Manufacturer: Crucible Technologies
+ */
+#define FTDI_CT_COMET_PID 0x8e08
wait_queue_t wait;
unsigned long flags;
+ if (!tty)
+ return;
+
if (!timeout)
timeout = (HZ * EDGE_CLOSING_WAIT)/100;
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define ALCATEL_PRODUCT_X220_X500D 0x0017
+#define ALCATEL_PRODUCT_L100V 0x011e
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
#define MEDIATEK_VENDOR_ID 0x0e8d
#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_4COM2 0x00a7
#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
#define MEDIATEK_PRODUCT_7208_1COM 0x7101
#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_7103_2COM 0x7103
+#define MEDIATEK_PRODUCT_7106_2COM 0x7106
#define MEDIATEK_PRODUCT_FP_1COM 0x0003
#define MEDIATEK_PRODUCT_FP_2COM 0x0023
#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
#define CELLIENT_VENDOR_ID 0x2692
#define CELLIENT_PRODUCT_MEN200 0x9005
+/* Hyundai Petatel Inc. products */
+#define PETATEL_VENDOR_ID 0x1ff4
+#define PETATEL_PRODUCT_NP10T 0x600e
+
+/* TP-LINK Incorporated products */
+#define TPLINK_VENDOR_ID 0x2357
+#define TPLINK_PRODUCT_MA180 0x0201
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+ { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+ { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
static int vcpu_online(unsigned int cpu)
{
int err;
- char dir[32], state[32];
+ char dir[16], state[16];
sprintf(dir, "cpu/%u", cpu);
- err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
+ err = xenbus_scanf(XBT_NIL, dir, "availability", "%15s", state);
if (err != 1) {
if (!xen_initial_domain())
printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
static atomic_t pages_mapped = ATOMIC_INIT(0);
static int use_ptemod;
+#define populate_freeable_maps use_ptemod
struct gntdev_priv {
+ /* maps with visible offsets in the file descriptor */
struct list_head maps;
- /* lock protects maps from concurrent changes */
+ /* maps that are not visible; will be freed on munmap.
+ * Only populated if populate_freeable_maps == 1 */
+ struct list_head freeable_maps;
+ /* lock protects maps and freeable_maps */
spinlock_t lock;
struct mm_struct *mm;
struct mmu_notifier mn;
return NULL;
}
-static void gntdev_put_map(struct grant_map *map)
+static void gntdev_put_map(struct gntdev_priv *priv, struct grant_map *map)
{
if (!map)
return;
evtchn_put(map->notify.event);
}
+ if (populate_freeable_maps && priv) {
+ spin_lock(&priv->lock);
+ list_del(&map->next);
+ spin_unlock(&priv->lock);
+ }
+
if (map->pages && !use_ptemod)
unmap_grant_pages(map, 0, map->count);
gntdev_free_map(map);
if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) {
int pgno = (map->notify.addr >> PAGE_SHIFT);
- if (pgno >= offset && pgno < offset + pages && use_ptemod) {
- void __user *tmp = (void __user *)
- map->vma->vm_start + map->notify.addr;
- err = copy_to_user(tmp, &err, 1);
- if (err)
- return -EFAULT;
- map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE;
- } else if (pgno >= offset && pgno < offset + pages) {
- uint8_t *tmp = kmap(map->pages[pgno]);
+ if (pgno >= offset && pgno < offset + pages) {
+ /* No need for kmap, pages are in lowmem */
+ uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno]));
tmp[map->notify.addr & (PAGE_SIZE-1)] = 0;
- kunmap(map->pages[pgno]);
map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE;
}
}
static void gntdev_vma_close(struct vm_area_struct *vma)
{
struct grant_map *map = vma->vm_private_data;
+ struct file *file = vma->vm_file;
+ struct gntdev_priv *priv = file->private_data;
pr_debug("gntdev_vma_close %p\n", vma);
- map->vma = NULL;
+ if (use_ptemod) {
+ /* It is possible that an mmu notifier could be running
+ * concurrently, so take priv->lock to ensure that the vma won't
+ * vanishing during the unmap_grant_pages call, since we will
+ * spin here until that completes. Such a concurrent call will
+ * not do any unmapping, since that has been done prior to
+ * closing the vma, but it may still iterate the unmap_ops list.
+ */
+ spin_lock(&priv->lock);
+ map->vma = NULL;
+ spin_unlock(&priv->lock);
+ }
vma->vm_private_data = NULL;
- gntdev_put_map(map);
+ gntdev_put_map(priv, map);
}
static struct vm_operations_struct gntdev_vmops = {
/* ------------------------------------------------------------------ */
+static void unmap_if_in_range(struct grant_map *map,
+ unsigned long start, unsigned long end)
+{
+ unsigned long mstart, mend;
+ int err;
+
+ if (!map->vma)
+ return;
+ if (map->vma->vm_start >= end)
+ return;
+ if (map->vma->vm_end <= start)
+ return;
+ mstart = max(start, map->vma->vm_start);
+ mend = min(end, map->vma->vm_end);
+ pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n",
+ map->index, map->count,
+ map->vma->vm_start, map->vma->vm_end,
+ start, end, mstart, mend);
+ err = unmap_grant_pages(map,
+ (mstart - map->vma->vm_start) >> PAGE_SHIFT,
+ (mend - mstart) >> PAGE_SHIFT);
+ WARN_ON(err);
+}
+
static void mn_invl_range_start(struct mmu_notifier *mn,
struct mm_struct *mm,
unsigned long start, unsigned long end)
{
struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn);
struct grant_map *map;
- unsigned long mstart, mend;
- int err;
spin_lock(&priv->lock);
list_for_each_entry(map, &priv->maps, next) {
- if (!map->vma)
- continue;
- if (map->vma->vm_start >= end)
- continue;
- if (map->vma->vm_end <= start)
- continue;
- mstart = max(start, map->vma->vm_start);
- mend = min(end, map->vma->vm_end);
- pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n",
- map->index, map->count,
- map->vma->vm_start, map->vma->vm_end,
- start, end, mstart, mend);
- err = unmap_grant_pages(map,
- (mstart - map->vma->vm_start) >> PAGE_SHIFT,
- (mend - mstart) >> PAGE_SHIFT);
- WARN_ON(err);
+ unmap_if_in_range(map, start, end);
+ }
+ list_for_each_entry(map, &priv->freeable_maps, next) {
+ unmap_if_in_range(map, start, end);
}
spin_unlock(&priv->lock);
}
err = unmap_grant_pages(map, /* offset */ 0, map->count);
WARN_ON(err);
}
+ list_for_each_entry(map, &priv->freeable_maps, next) {
+ if (!map->vma)
+ continue;
+ pr_debug("map %d+%d (%lx %lx)\n",
+ map->index, map->count,
+ map->vma->vm_start, map->vma->vm_end);
+ err = unmap_grant_pages(map, /* offset */ 0, map->count);
+ WARN_ON(err);
+ }
spin_unlock(&priv->lock);
}
return -ENOMEM;
INIT_LIST_HEAD(&priv->maps);
+ INIT_LIST_HEAD(&priv->freeable_maps);
spin_lock_init(&priv->lock);
if (use_ptemod) {
while (!list_empty(&priv->maps)) {
map = list_entry(priv->maps.next, struct grant_map, next);
list_del(&map->next);
- gntdev_put_map(map);
+ gntdev_put_map(NULL /* already removed */, map);
}
+ WARN_ON(!list_empty(&priv->freeable_maps));
if (use_ptemod)
mmu_notifier_unregister(&priv->mn, priv->mm);
if (unlikely(atomic_add_return(op.count, &pages_mapped) > limit)) {
pr_debug("can't map: over limit\n");
- gntdev_put_map(map);
+ gntdev_put_map(NULL, map);
return err;
}
if (copy_from_user(map->grants, &u->refs,
sizeof(map->grants[0]) * op.count) != 0) {
- gntdev_put_map(map);
- return err;
+ gntdev_put_map(NULL, map);
+ return -EFAULT;
}
spin_lock(&priv->lock);
map = gntdev_find_map_index(priv, op.index >> PAGE_SHIFT, op.count);
if (map) {
list_del(&map->next);
+ if (populate_freeable_maps)
+ list_add_tail(&map->next, &priv->freeable_maps);
err = 0;
}
spin_unlock(&priv->lock);
if (map)
- gntdev_put_map(map);
+ gntdev_put_map(priv, map);
return err;
}
struct ioctl_gntdev_get_offset_for_vaddr op;
struct vm_area_struct *vma;
struct grant_map *map;
+ int rv = -EINVAL;
if (copy_from_user(&op, u, sizeof(op)) != 0)
return -EFAULT;
pr_debug("priv %p, offset for vaddr %lx\n", priv, (unsigned long)op.vaddr);
+ down_read(¤t->mm->mmap_sem);
vma = find_vma(current->mm, op.vaddr);
if (!vma || vma->vm_ops != &gntdev_vmops)
- return -EINVAL;
+ goto out_unlock;
map = vma->vm_private_data;
if (!map)
- return -EINVAL;
+ goto out_unlock;
op.offset = map->index << PAGE_SHIFT;
op.count = map->count;
+ rv = 0;
- if (copy_to_user(u, &op, sizeof(op)) != 0)
+ out_unlock:
+ up_read(¤t->mm->mmap_sem);
+
+ if (rv == 0 && copy_to_user(u, &op, sizeof(op)) != 0)
return -EFAULT;
- return 0;
+ return rv;
}
static long gntdev_ioctl_notify(struct gntdev_priv *priv, void __user *u)
out_put_map:
if (use_ptemod)
map->vma = NULL;
- gntdev_put_map(map);
+ gntdev_put_map(priv, map);
return err;
}
/* External tools reserve first few grant table entries. */
#define NR_RESERVED_ENTRIES 8
#define GNTTAB_LIST_END 0xffffffff
-#define GREFS_PER_GRANT_FRAME \
-(grant_table_version == 1 ? \
-(PAGE_SIZE / sizeof(struct grant_entry_v1)) : \
-(PAGE_SIZE / sizeof(union grant_entry_v2)))
static grant_ref_t **gnttab_list;
static unsigned int nr_grant_frames;
static grant_status_t *grstatus;
static int grant_table_version;
+static int grefs_per_grant_frame;
static struct gnttab_free_callback *gnttab_free_callback_list;
unsigned int new_nr_grant_frames, extra_entries, i;
unsigned int nr_glist_frames, new_nr_glist_frames;
+ BUG_ON(grefs_per_grant_frame == 0);
+
new_nr_grant_frames = nr_grant_frames + more_frames;
- extra_entries = more_frames * GREFS_PER_GRANT_FRAME;
+ extra_entries = more_frames * grefs_per_grant_frame;
- nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP;
new_nr_glist_frames =
- (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ (new_nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP;
for (i = nr_glist_frames; i < new_nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC);
if (!gnttab_list[i])
}
- for (i = GREFS_PER_GRANT_FRAME * nr_grant_frames;
- i < GREFS_PER_GRANT_FRAME * new_nr_grant_frames - 1; i++)
+ for (i = grefs_per_grant_frame * nr_grant_frames;
+ i < grefs_per_grant_frame * new_nr_grant_frames - 1; i++)
gnttab_entry(i) = i + 1;
gnttab_entry(i) = gnttab_free_head;
- gnttab_free_head = GREFS_PER_GRANT_FRAME * nr_grant_frames;
+ gnttab_free_head = grefs_per_grant_frame * nr_grant_frames;
gnttab_free_count += extra_entries;
nr_grant_frames = new_nr_grant_frames;
static unsigned nr_status_frames(unsigned nr_grant_frames)
{
- return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP;
+ BUG_ON(grefs_per_grant_frame == 0);
+ return (nr_grant_frames * grefs_per_grant_frame + SPP - 1) / SPP;
}
static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes)
rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1);
if (rc == 0 && gsv.version == 2) {
grant_table_version = 2;
+ grefs_per_grant_frame = PAGE_SIZE / sizeof(union grant_entry_v2);
gnttab_interface = &gnttab_v2_ops;
} else if (grant_table_version == 2) {
/*
panic("we need grant tables version 2, but only version 1 is available");
} else {
grant_table_version = 1;
+ grefs_per_grant_frame = PAGE_SIZE / sizeof(struct grant_entry_v1);
gnttab_interface = &gnttab_v1_ops;
}
printk(KERN_INFO "Grant tables using version %d layout.\n",
grant_table_version);
}
-int gnttab_resume(void)
+static int gnttab_setup(void)
{
unsigned int max_nr_gframes;
- gnttab_request_version();
max_nr_gframes = gnttab_max_grant_frames();
if (max_nr_gframes < nr_grant_frames)
return -ENOSYS;
return 0;
}
+int gnttab_resume(void)
+{
+ gnttab_request_version();
+ return gnttab_setup();
+}
+
int gnttab_suspend(void)
{
gnttab_interface->unmap_frames();
int rc;
unsigned int cur, extra;
+ BUG_ON(grefs_per_grant_frame == 0);
cur = nr_grant_frames;
- extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) /
- GREFS_PER_GRANT_FRAME);
+ extra = ((req_entries + (grefs_per_grant_frame-1)) /
+ grefs_per_grant_frame);
if (cur + extra > gnttab_max_grant_frames())
return -ENOSPC;
unsigned int nr_init_grefs;
int ret;
+ gnttab_request_version();
nr_grant_frames = 1;
boot_max_nr_grant_frames = __max_nr_grant_frames();
/* Determine the maximum number of frames required for the
* grant reference free list on the current hypervisor.
*/
+ BUG_ON(grefs_per_grant_frame == 0);
max_nr_glist_frames = (boot_max_nr_grant_frames *
- GREFS_PER_GRANT_FRAME / RPP);
+ grefs_per_grant_frame / RPP);
gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *),
GFP_KERNEL);
if (gnttab_list == NULL)
return -ENOMEM;
- nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP;
for (i = 0; i < nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
if (gnttab_list[i] == NULL) {
}
}
- if (gnttab_resume() < 0) {
+ if (gnttab_setup() < 0) {
ret = -ENODEV;
goto ini_nomem;
}
- nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME;
+ nr_init_grefs = nr_grant_frames * grefs_per_grant_frame;
for (i = NR_RESERVED_ENTRIES; i < nr_init_grefs - 1; i++)
gnttab_entry(i) = i + 1;
LIST_HEAD(pagelist);
struct mmap_mfn_state state;
- if (!xen_initial_domain())
- return -EPERM;
-
/* We only support privcmd_ioctl_mmap_batch for auto translated. */
if (xen_feature(XENFEAT_auto_translated_physmap))
return -ENOSYS;
* -ENOENT if at least 1 -ENOENT has happened.
*/
int global_error;
- /* An array for individual errors */
- int *err;
+ int version;
/* User-space mfn array to store errors in the second pass for V1. */
xen_pfn_t __user *user_mfn;
+ /* User-space int array to store errors in the second pass for V2. */
+ int __user *user_err;
};
/* auto translated dom0 note: if domU being created is PV, then mfn is
&cur_page);
/* Store error code for second pass. */
- *(st->err++) = ret;
+ if (st->version == 1) {
+ if (ret < 0) {
+ /*
+ * V1 encodes the error codes in the 32bit top nibble of the
+ * mfn (with its known limitations vis-a-vis 64 bit callers).
+ */
+ *mfnp |= (ret == -ENOENT) ?
+ PRIVCMD_MMAPBATCH_PAGED_ERROR :
+ PRIVCMD_MMAPBATCH_MFN_ERROR;
+ }
+ } else { /* st->version == 2 */
+ *((int *) mfnp) = ret;
+ }
/* And see if it affects the global_error. */
if (ret < 0) {
return 0;
}
-static int mmap_return_errors_v1(void *data, void *state)
+static int mmap_return_errors(void *data, void *state)
{
- xen_pfn_t *mfnp = data;
struct mmap_batch_state *st = state;
- int err = *(st->err++);
- /*
- * V1 encodes the error codes in the 32bit top nibble of the
- * mfn (with its known limitations vis-a-vis 64 bit callers).
- */
- *mfnp |= (err == -ENOENT) ?
- PRIVCMD_MMAPBATCH_PAGED_ERROR :
- PRIVCMD_MMAPBATCH_MFN_ERROR;
- return __put_user(*mfnp, st->user_mfn++);
+ if (st->version == 1) {
+ xen_pfn_t mfnp = *((xen_pfn_t *) data);
+ if (mfnp & PRIVCMD_MMAPBATCH_MFN_ERROR)
+ return __put_user(mfnp, st->user_mfn++);
+ else
+ st->user_mfn++;
+ } else { /* st->version == 2 */
+ int err = *((int *) data);
+ if (err)
+ return __put_user(err, st->user_err++);
+ else
+ st->user_err++;
+ }
+
+ return 0;
}
/* Allocate pfns that are then mapped with gmfns from foreign domid. Update
struct vm_area_struct *vma;
unsigned long nr_pages;
LIST_HEAD(pagelist);
- int *err_array = NULL;
struct mmap_batch_state state;
- if (!xen_initial_domain())
- return -EPERM;
-
switch (version) {
case 1:
if (copy_from_user(&m, udata, sizeof(struct privcmd_mmapbatch)))
goto out;
}
- err_array = kcalloc(m.num, sizeof(int), GFP_KERNEL);
- if (err_array == NULL) {
- ret = -ENOMEM;
- goto out;
+ if (version == 2) {
+ /* Zero error array now to only copy back actual errors. */
+ if (clear_user(m.err, sizeof(int) * m.num)) {
+ ret = -EFAULT;
+ goto out;
+ }
}
down_write(&mm->mmap_sem);
state.va = m.addr;
state.index = 0;
state.global_error = 0;
- state.err = err_array;
+ state.version = version;
/* mmap_batch_fn guarantees ret == 0 */
BUG_ON(traverse_pages(m.num, sizeof(xen_pfn_t),
up_write(&mm->mmap_sem);
- if (version == 1) {
- if (state.global_error) {
- /* Write back errors in second pass. */
- state.user_mfn = (xen_pfn_t *)m.arr;
- state.err = err_array;
- ret = traverse_pages(m.num, sizeof(xen_pfn_t),
- &pagelist, mmap_return_errors_v1, &state);
- } else
- ret = 0;
-
- } else if (version == 2) {
- ret = __copy_to_user(m.err, err_array, m.num * sizeof(int));
- if (ret)
- ret = -EFAULT;
- }
+ if (state.global_error) {
+ /* Write back errors in second pass. */
+ state.user_mfn = (xen_pfn_t *)m.arr;
+ state.user_err = m.err;
+ ret = traverse_pages(m.num, sizeof(xen_pfn_t),
+ &pagelist, mmap_return_errors, &state);
+ } else
+ ret = 0;
/* If we have not had any EFAULT-like global errors then set the global
* error to -ENOENT if necessary. */
ret = -ENOENT;
out:
- kfree(err_array);
free_page_list(&pagelist);
return ret;
static inline void xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev,
struct pci_dev *dev)
{
- if (xen_pcibk_backend && xen_pcibk_backend->free)
+ if (xen_pcibk_backend && xen_pcibk_backend->release)
return xen_pcibk_backend->release(pdev, dev);
}
void *kaddr = kmap_atomic(bh->b_page);
memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes);
kunmap_atomic(kaddr);
+ flush_dcache_page(bh->b_page);
}
}
opts->uid = uid;
break;
case Opt_gid:
- if (match_octal(&args[0], &option))
+ if (match_int(&args[0], &option))
return -EINVAL;
gid = make_kgid(current_user_ns(), option);
if (!gid_valid(gid))
* currently running transaction (if it exists). Otherwise,
* the target tid must be an old one.
*/
- if (journal->j_running_transaction &&
+ if (journal->j_commit_request != target &&
+ journal->j_running_transaction &&
journal->j_running_transaction->t_tid == target) {
/*
* We want a new commit: OK, mark the request and wakeup the
{
struct udf_sb_info *sbi = UDF_SB(sb);
int i;
-
+ if (sbi->s_partmaps == NULL)
+ return;
for (i = 0; i < sbi->s_partitions; i++)
udf_free_partition(&sbi->s_partmaps[i]);
kfree(sbi->s_partmaps);
bp->b_map_count = map_count;
if (map_count == 1) {
- bp->b_maps = &bp->b_map;
+ bp->b_maps = &bp->__b_map;
return 0;
}
xfs_buf_free_maps(
struct xfs_buf *bp)
{
- if (bp->b_maps != &bp->b_map) {
+ if (bp->b_maps != &bp->__b_map) {
kmem_free(bp->b_maps);
bp->b_maps = NULL;
}
}
use_alloc_page:
- start = BBTOB(bp->b_map.bm_bn) >> PAGE_SHIFT;
- end = (BBTOB(bp->b_map.bm_bn + bp->b_length) + PAGE_SIZE - 1)
+ start = BBTOB(bp->b_maps[0].bm_bn) >> PAGE_SHIFT;
+ end = (BBTOB(bp->b_maps[0].bm_bn + bp->b_length) + PAGE_SIZE - 1)
>> PAGE_SHIFT;
page_count = end - start;
error = _xfs_buf_get_pages(bp, page_count, flags);
xfs_buf_flags_t flags)
{
ASSERT(!(flags & XBF_WRITE));
- ASSERT(bp->b_map.bm_bn != XFS_BUF_DADDR_NULL);
+ ASSERT(bp->b_maps[0].bm_bn != XFS_BUF_DADDR_NULL);
bp->b_flags &= ~(XBF_WRITE | XBF_ASYNC | XBF_READ_AHEAD);
bp->b_flags |= flags & (XBF_READ | XBF_ASYNC | XBF_READ_AHEAD);
struct xfs_buf *bp = container_of(b, struct xfs_buf, b_list);
xfs_daddr_t diff;
- diff = ap->b_map.bm_bn - bp->b_map.bm_bn;
+ diff = ap->b_maps[0].bm_bn - bp->b_maps[0].bm_bn;
if (diff < 0)
return -1;
if (diff > 0)
struct page **b_pages; /* array of page pointers */
struct page *b_page_array[XB_PAGES]; /* inline pages */
struct xfs_buf_map *b_maps; /* compound buffer map */
- struct xfs_buf_map b_map; /* inline compound buffer map */
+ struct xfs_buf_map __b_map; /* inline compound buffer map */
int b_map_count;
int b_io_length; /* IO size in BBs */
atomic_t b_pin_count; /* pin count */
* In future, uncached buffers will pass the block number directly to the io
* request function and hence these macros will go away at that point.
*/
-#define XFS_BUF_ADDR(bp) ((bp)->b_map.bm_bn)
-#define XFS_BUF_SET_ADDR(bp, bno) ((bp)->b_map.bm_bn = (xfs_daddr_t)(bno))
+#define XFS_BUF_ADDR(bp) ((bp)->b_maps[0].bm_bn)
+#define XFS_BUF_SET_ADDR(bp, bno) ((bp)->b_maps[0].bm_bn = (xfs_daddr_t)(bno))
static inline void xfs_buf_set_ref(struct xfs_buf *bp, int lru_ref)
{
chunk_num = byte >> XFS_BLF_SHIFT;
word_num = chunk_num >> BIT_TO_WORD_SHIFT;
bit_num = chunk_num & (NBWORD - 1);
- wordp = &(bip->bli_format.blf_data_map[word_num]);
+ wordp = &(bip->__bli_format.blf_data_map[word_num]);
bit_set = *wordp & (1 << bit_num);
ASSERT(bit_set);
byte++;
* cancel flag in it.
*/
trace_xfs_buf_item_size_stale(bip);
- ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
+ ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL);
return bip->bli_format_count;
}
uint buffer_offset;
/* copy the flags across from the base format item */
- blfp->blf_flags = bip->bli_format.blf_flags;
+ blfp->blf_flags = bip->__bli_format.blf_flags;
/*
* Base size is the actual size of the ondisk structure - it reflects
*/
base_size = offsetof(struct xfs_buf_log_format, blf_data_map) +
(blfp->blf_map_size * sizeof(blfp->blf_data_map[0]));
+
+ nvecs = 0;
+ first_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size, 0);
+ if (!(bip->bli_flags & XFS_BLI_STALE) && first_bit == -1) {
+ /*
+ * If the map is not be dirty in the transaction, mark
+ * the size as zero and do not advance the vector pointer.
+ */
+ goto out;
+ }
+
vecp->i_addr = blfp;
vecp->i_len = base_size;
vecp->i_type = XLOG_REG_TYPE_BFORMAT;
*/
trace_xfs_buf_item_format_stale(bip);
ASSERT(blfp->blf_flags & XFS_BLF_CANCEL);
- blfp->blf_size = nvecs;
- return vecp;
+ goto out;
}
/*
* Fill in an iovec for each set of contiguous chunks.
*/
- first_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size, 0);
- ASSERT(first_bit != -1);
+
last_bit = first_bit;
nbits = 1;
for (;;) {
nbits++;
}
}
- bip->bli_format.blf_size = nvecs;
+out:
+ blfp->blf_size = nvecs;
return vecp;
}
if (bip->bli_flags & XFS_BLI_INODE_BUF) {
if (!((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) &&
xfs_log_item_in_current_chkpt(lip)))
- bip->bli_format.blf_flags |= XFS_BLF_INODE_BUF;
+ bip->__bli_format.blf_flags |= XFS_BLF_INODE_BUF;
bip->bli_flags &= ~XFS_BLI_INODE_BUF;
}
ASSERT(bip->bli_flags & XFS_BLI_STALE);
ASSERT(xfs_buf_islocked(bp));
ASSERT(XFS_BUF_ISSTALE(bp));
- ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
+ ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL);
trace_xfs_buf_item_unpin_stale(bip);
{
struct xfs_buf_log_item *bip = BUF_ITEM(lip);
struct xfs_buf *bp = bip->bli_buf;
- int aborted;
+ int aborted, clean, i;
uint hold;
/* Clear the buffer's association with this transaction. */
*/
if (bip->bli_flags & XFS_BLI_STALE) {
trace_xfs_buf_item_unlock_stale(bip);
- ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
+ ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL);
if (!aborted) {
atomic_dec(&bip->bli_refcount);
return;
* If the buf item isn't tracking any data, free it, otherwise drop the
* reference we hold to it.
*/
- if (xfs_bitmap_empty(bip->bli_format.blf_data_map,
- bip->bli_format.blf_map_size))
+ clean = 1;
+ for (i = 0; i < bip->bli_format_count; i++) {
+ if (!xfs_bitmap_empty(bip->bli_formats[i].blf_data_map,
+ bip->bli_formats[i].blf_map_size)) {
+ clean = 0;
+ break;
+ }
+ }
+ if (clean)
xfs_buf_item_relse(bp);
else
atomic_dec(&bip->bli_refcount);
bip->bli_format_count = count;
if (count == 1) {
- bip->bli_formats = &bip->bli_format;
+ bip->bli_formats = &bip->__bli_format;
return 0;
}
xfs_buf_item_free_format(
struct xfs_buf_log_item *bip)
{
- if (bip->bli_formats != &bip->bli_format) {
+ if (bip->bli_formats != &bip->__bli_format) {
kmem_free(bip->bli_formats);
bip->bli_formats = NULL;
}
#endif
int bli_format_count; /* count of headers */
struct xfs_buf_log_format *bli_formats; /* array of in-log header ptrs */
- struct xfs_buf_log_format bli_format; /* embedded in-log header */
+ struct xfs_buf_log_format __bli_format; /* embedded in-log header */
} xfs_buf_log_item_t;
void xfs_buf_item_init(struct xfs_buf *, struct xfs_mount *);
/*
* If need to compact the leaf entries, do it now.
*/
- if (compact)
+ if (compact) {
xfs_dir2_block_compact(tp, bp, hdr, btp, blp, &needlog,
&lfloghigh, &lfloglow);
- else if (btp->stale) {
+ /* recalculate blp post-compaction */
+ blp = xfs_dir2_block_leaf_p(btp);
+ } else if (btp->stale) {
/*
* Set leaf logging boundaries to impossible state.
* For the no-stale case they're set explicitly.
(XFS_IS_OQUOTA_ENFORCED(mp) &&
(dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) &&
dst->d_id != 0) {
- if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) &&
+ if ((dst->d_bcount > dst->d_blk_softlimit) &&
(dst->d_blk_softlimit > 0)) {
ASSERT(dst->d_btimer != 0);
}
- if (((int) dst->d_icount > (int) dst->d_ino_softlimit) &&
+ if ((dst->d_icount > dst->d_ino_softlimit) &&
(dst->d_ino_softlimit > 0)) {
ASSERT(dst->d_itimer != 0);
}
xfs_buf_item_init(bp, tp->t_mountp);
bip = bp->b_fspriv;
ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
- ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
+ ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL));
ASSERT(!(bip->bli_flags & XFS_BLI_LOGGED));
if (reset_recur)
bip->bli_recur = 0;
bip = bp->b_fspriv;
ASSERT(bip->bli_item.li_type == XFS_LI_BUF);
ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
- ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
+ ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL));
ASSERT(atomic_read(&bip->bli_refcount) > 0);
trace_xfs_trans_brelse(bip);
ASSERT(bp->b_transp == tp);
ASSERT(bip != NULL);
ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
- ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
+ ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL));
ASSERT(atomic_read(&bip->bli_refcount) > 0);
bip->bli_flags |= XFS_BLI_HOLD;
ASSERT(bp->b_transp == tp);
ASSERT(bip != NULL);
ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
- ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
+ ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_CANCEL));
ASSERT(atomic_read(&bip->bli_refcount) > 0);
ASSERT(bip->bli_flags & XFS_BLI_HOLD);
bip->bli_flags &= ~XFS_BLI_STALE;
ASSERT(XFS_BUF_ISSTALE(bp));
XFS_BUF_UNSTALE(bp);
- bip->bli_format.blf_flags &= ~XFS_BLF_CANCEL;
+ bip->__bli_format.blf_flags &= ~XFS_BLF_CANCEL;
}
tp->t_flags |= XFS_TRANS_DIRTY;
xfs_buf_t *bp)
{
xfs_buf_log_item_t *bip = bp->b_fspriv;
+ int i;
ASSERT(bp->b_transp == tp);
ASSERT(bip != NULL);
*/
ASSERT(XFS_BUF_ISSTALE(bp));
ASSERT(!(bip->bli_flags & (XFS_BLI_LOGGED | XFS_BLI_DIRTY)));
- ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_INODE_BUF));
- ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
+ ASSERT(!(bip->__bli_format.blf_flags & XFS_BLF_INODE_BUF));
+ ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL);
ASSERT(bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY);
ASSERT(tp->t_flags & XFS_TRANS_DIRTY);
return;
bip->bli_flags |= XFS_BLI_STALE;
bip->bli_flags &= ~(XFS_BLI_INODE_BUF | XFS_BLI_LOGGED | XFS_BLI_DIRTY);
- bip->bli_format.blf_flags &= ~XFS_BLF_INODE_BUF;
- bip->bli_format.blf_flags |= XFS_BLF_CANCEL;
- memset((char *)(bip->bli_format.blf_data_map), 0,
- (bip->bli_format.blf_map_size * sizeof(uint)));
+ bip->__bli_format.blf_flags &= ~XFS_BLF_INODE_BUF;
+ bip->__bli_format.blf_flags |= XFS_BLF_CANCEL;
+ for (i = 0; i < bip->bli_format_count; i++) {
+ memset(bip->bli_formats[i].blf_data_map, 0,
+ (bip->bli_formats[i].blf_map_size * sizeof(uint)));
+ }
bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
tp->t_flags |= XFS_TRANS_DIRTY;
}
type == XFS_BLF_GDQUOT_BUF);
ASSERT(atomic_read(&bip->bli_refcount) > 0);
- bip->bli_format.blf_flags |= type;
+ bip->__bli_format.blf_flags |= type;
}
return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT);
}
-static inline unsigned long my_zero_pfn(unsigned long addr)
-{
- return page_to_pfn(ZERO_PAGE(addr));
-}
+#define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr))
+
#else
static inline int is_zero_pfn(unsigned long pfn)
{
unsigned long fd, off_t pgoff);
#endif
+#ifndef CONFIG_GENERIC_SIGALTSTACK
#ifndef sys_sigaltstack
asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
struct pt_regs *);
#endif
+#endif
#ifndef sys_rt_sigreturn
asmlinkage long sys_rt_sigreturn(struct pt_regs *regs);
struct module *owner;
int refcnt;
- unsigned int power_specified:1;
/* set to 1 to use the core cpuidle time keeping (for all states). */
unsigned int en_core_tk_irqen:1;
+ /* states array must be ordered in decreasing power consumption */
struct cpuidle_state states[CPUIDLE_STATE_MAX];
int state_count;
int safe_state_index;
#define __exit __section(.exit.text) __exitused __cold notrace
-/* Used for HOTPLUG, but that is always enabled now, so just make them noops */
-#define __devinit
-#define __devinitdata
-#define __devinitconst
-#define __devexit
-#define __devexitdata
-#define __devexitconst
-
/* Used for HOTPLUG_CPU */
#define __cpuinit __section(.cpuinit.text) __cold notrace
#define __cpuinitdata __section(.cpuinit.data)
#define __INITRODATA_OR_MODULE __INITRODATA
#endif /*CONFIG_MODULES*/
-/* Functions marked as __devexit may be discarded at kernel link time, depending
- on config options. Newer versions of binutils detect references from
- retained sections to discarded sections and flag an error. Pointers to
- __devexit functions must use __devexit_p(function_name), the wrapper will
- insert either the function_name or NULL, depending on the config options.
- */
-#if defined(MODULE) || defined(CONFIG_HOTPLUG)
-#define __devexit_p(x) x
-#else
-#define __devexit_p(x) NULL
-#endif
-
#ifdef MODULE
#define __exit_p(x) x
#else
struct module *source, *target;
};
-enum module_state
-{
- MODULE_STATE_LIVE,
- MODULE_STATE_COMING,
- MODULE_STATE_GOING,
+enum module_state {
+ MODULE_STATE_LIVE, /* Normal state. */
+ MODULE_STATE_COMING, /* Full formed, running module_init. */
+ MODULE_STATE_GOING, /* Going away. */
+ MODULE_STATE_UNFORMED, /* Still setting it up. */
};
/**
#define SET_ETHTOOL_OPS(netdev,ops) \
( (netdev)->ethtool_ops = (ops) )
+extern void netdev_set_default_ethtool_ops(struct net_device *dev,
+ const struct ethtool_ops *ops);
+
/* hardware address assignment types */
#define NET_ADDR_PERM 0 /* address is permanent (default) */
#define NET_ADDR_RANDOM 1 /* address is generated randomly */
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
extern void ptrace_disable(struct task_struct *);
-extern int ptrace_check_attach(struct task_struct *task, bool ignore_state);
extern int ptrace_request(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
extern void ptrace_notify(int exit_code);
#else
# define down_read_nested(sem, subclass) down_read(sem)
-# define down_write_nest_lock(sem, nest_lock) down_read(sem)
+# define down_write_nest_lock(sem, nest_lock) down_write(sem)
# define down_write_nested(sem, subclass) down_write(sem)
#endif
#define PF_MEMALLOC 0x00000800 /* Allocating memory */
#define PF_NPROC_EXCEEDED 0x00001000 /* set_user noticed that RLIMIT_NPROC was exceeded */
#define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */
+#define PF_USED_ASYNC 0x00004000 /* used async_schedule*(), used by module init */
#define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */
#define PF_FROZEN 0x00010000 /* frozen for system suspend */
#define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */
extern void recalc_sigpending_and_wake(struct task_struct *t);
extern void recalc_sigpending(void);
-extern void signal_wake_up(struct task_struct *t, int resume_stopped);
+extern void signal_wake_up_state(struct task_struct *t, unsigned int state);
+
+static inline void signal_wake_up(struct task_struct *t, bool resume)
+{
+ signal_wake_up_state(t, resume ? TASK_WAKEKILL : 0);
+}
+static inline void ptrace_signal_wake_up(struct task_struct *t, bool resume)
+{
+ signal_wake_up_state(t, resume ? __TASK_TRACED : 0);
+}
/*
* Wrappers for p->thread_info->cpu access. No-op on UP.
struct cs4271_platform_data {
int gpio_nreset; /* GPIO driving Reset pin, if any */
- int amutec_eq_bmutec:1; /* flag to enable AMUTEC=BMUTEC */
+ bool amutec_eq_bmutec; /* flag to enable AMUTEC=BMUTEC */
};
#endif /* __CS4271_H */
.info = snd_soc_info_volsw_range, .get = snd_soc_get_volsw_range, \
.put = snd_soc_put_volsw_range, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = xshift, .min = xmin,\
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ {.reg = xreg, .rreg = xreg, .shift = xshift, \
+ .rshift = xshift, .min = xmin, .max = xmax, \
+ .platform_max = xmax, .invert = xinvert} }
#define SOC_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
.info = snd_soc_info_volsw_range, \
.get = snd_soc_get_volsw_range, .put = snd_soc_put_volsw_range, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = xshift, .min = xmin,\
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ {.reg = xreg, .rreg = xreg, .shift = xshift, \
+ .rshift = xshift, .min = xmin, .max = xmax, \
+ .platform_max = xmax, .invert = xinvert} }
#define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
enum tcm_sense_reason_table {
#define R(x) (__force sense_reason_t )(x)
+ TCM_NO_SENSE = R(0x00),
TCM_NON_EXISTENT_LUN = R(0x01),
TCM_UNSUPPORTED_SCSI_OPCODE = R(0x02),
TCM_INCORRECT_AMOUNT_OF_DATA = R(0x03),
#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
-#define PORT_MAX_8250 24 /* max port ID */
+#define PORT_BRCM_TRUMANAGE 24
+#define PORT_MAX_8250 25 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller kernel.
- If unsure, say Y.
+ If unsure, say N.
config SYSCTL
bool
static int init_linuxrc(struct subprocess_info *info, struct cred *new)
{
sys_unshare(CLONE_FS | CLONE_FILES);
+ /* stdin/stdout/stderr for /linuxrc */
+ sys_open("/dev/console", O_RDWR, 0);
+ sys_dup(0);
+ sys_dup(0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir("/root");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
(const char __user *const __user *)envp_init);
}
-static void __init kernel_init_freeable(void);
+static noinline void __init kernel_init_freeable(void);
static int __ref kernel_init(void *unused)
{
"See Linux Documentation/init.txt for guidance.");
}
-static void __init kernel_init_freeable(void)
+static noinline void __init kernel_init_freeable(void)
{
/*
* Wait until kthreadd is all set-up.
atomic_inc(&entry_count);
spin_unlock_irqrestore(&async_lock, flags);
+ /* mark that this task has queued an async job, used by module init */
+ current->flags |= PF_USED_ASYNC;
+
/* schedule for execution */
queue_work(system_unbound_wq, &entry->work);
return 0;
}
-asmlinkage long
-compat_sys_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, int options,
- struct compat_rusage __user *ru)
+COMPAT_SYSCALL_DEFINE4(wait4,
+ compat_pid_t, pid,
+ compat_uint_t __user *, stat_addr,
+ int, options,
+ struct compat_rusage __user *, ru)
{
if (!ru) {
return sys_wait4(pid, stat_addr, options, NULL);
}
}
-asmlinkage long compat_sys_waitid(int which, compat_pid_t pid,
- struct compat_siginfo __user *uinfo, int options,
- struct compat_rusage __user *uru)
+COMPAT_SYSCALL_DEFINE5(waitid,
+ int, which, compat_pid_t, pid,
+ struct compat_siginfo __user *, uinfo, int, options,
+ struct compat_rusage __user *, uru)
{
siginfo_t info;
struct rusage ru;
return ret;
if (uru) {
- ret = put_compat_rusage(&ru, uru);
+ /* sys_waitid() overwrites everything in ru */
+ if (COMPAT_USE_64BIT_TIME)
+ ret = copy_to_user(uru, &ru, sizeof(ru));
+ else
+ ret = put_compat_rusage(&ru, uru);
if (ret)
return ret;
}
sigset_from_compat(&s, &s32);
if (uts) {
- if (get_compat_timespec(&t, uts))
+ if (compat_get_timespec(&t, uts))
return -EFAULT;
}
kdb_printf("Module Size modstruct Used by\n");
list_for_each_entry(mod, kdb_modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
kdb_printf("%-20s%8u 0x%p ", mod->name,
mod->core_size, (void *)mod);
int, tls_val)
#endif
{
- return do_fork(clone_flags, newsp, 0,
- parent_tidptr, child_tidptr);
+ long ret = do_fork(clone_flags, newsp, 0, parent_tidptr, child_tidptr);
+ asmlinkage_protect(5, ret, clone_flags, newsp,
+ parent_tidptr, child_tidptr, tls_val);
+ return ret;
}
#endif
ongoing or failed initialization etc. */
static inline int strong_try_module_get(struct module *mod)
{
+ BUG_ON(mod && mod->state == MODULE_STATE_UNFORMED);
if (mod && mod->state == MODULE_STATE_COMING)
return -EBUSY;
if (try_module_get(mod))
#endif
};
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
+
if (each_symbol_in_section(arr, ARRAY_SIZE(arr), mod, fn, data))
return true;
}
EXPORT_SYMBOL_GPL(find_symbol);
/* Search for module by name: must hold module_mutex. */
-struct module *find_module(const char *name)
+static struct module *find_module_all(const char *name,
+ bool even_unformed)
{
struct module *mod;
list_for_each_entry(mod, &modules, list) {
+ if (!even_unformed && mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (strcmp(mod->name, name) == 0)
return mod;
}
return NULL;
}
+
+struct module *find_module(const char *name)
+{
+ return find_module_all(name, false);
+}
EXPORT_SYMBOL_GPL(find_module);
#ifdef CONFIG_SMP
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (!mod->percpu_size)
continue;
for_each_possible_cpu(cpu) {
case MODULE_STATE_GOING:
state = "going";
break;
+ default:
+ BUG();
}
return sprintf(buffer, "%s\n", state);
}
mutex_lock(&module_mutex);
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if ((mod->module_core) && (mod->core_text_size)) {
set_page_attributes(mod->module_core,
mod->module_core + mod->core_text_size,
mutex_lock(&module_mutex);
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if ((mod->module_core) && (mod->core_text_size)) {
set_page_attributes(mod->module_core,
mod->module_core + mod->core_text_size,
err = -EFBIG;
goto out;
}
+
+ /* Don't hand 0 to vmalloc, it whines. */
+ if (stat.size == 0) {
+ err = -EINVAL;
+ goto out;
+ }
+
info->hdr = vmalloc(stat.size);
if (!info->hdr) {
err = -ENOMEM;
bool ret;
mutex_lock(&module_mutex);
- mod = find_module(name);
- ret = !mod || mod->state != MODULE_STATE_COMING;
+ mod = find_module_all(name, true);
+ ret = !mod || mod->state == MODULE_STATE_LIVE
+ || mod->state == MODULE_STATE_GOING;
mutex_unlock(&module_mutex);
return ret;
{
int ret = 0;
+ /*
+ * We want to find out whether @mod uses async during init. Clear
+ * PF_USED_ASYNC. async_schedule*() will set it.
+ */
+ current->flags &= ~PF_USED_ASYNC;
+
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_COMING, mod);
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_LIVE, mod);
- /* We need to finish all async code before the module init sequence is done */
- async_synchronize_full();
+ /*
+ * We need to finish all async code before the module init sequence
+ * is done. This has potential to deadlock. For example, a newly
+ * detected block device can trigger request_module() of the
+ * default iosched from async probing task. Once userland helper
+ * reaches here, async_synchronize_full() will wait on the async
+ * task waiting on request_module() and deadlock.
+ *
+ * This deadlock is avoided by perfomring async_synchronize_full()
+ * iff module init queued any async jobs. This isn't a full
+ * solution as it will deadlock the same if module loading from
+ * async jobs nests more than once; however, due to the various
+ * constraints, this hack seems to be the best option for now.
+ * Please refer to the following thread for details.
+ *
+ * http://thread.gmane.org/gmane.linux.kernel/1420814
+ */
+ if (current->flags & PF_USED_ASYNC)
+ async_synchronize_full();
mutex_lock(&module_mutex);
/* Drop initial reference. */
goto free_copy;
}
+ /*
+ * We try to place it in the list now to make sure it's unique
+ * before we dedicate too many resources. In particular,
+ * temporary percpu memory exhaustion.
+ */
+ mod->state = MODULE_STATE_UNFORMED;
+again:
+ mutex_lock(&module_mutex);
+ if ((old = find_module_all(mod->name, true)) != NULL) {
+ if (old->state == MODULE_STATE_COMING
+ || old->state == MODULE_STATE_UNFORMED) {
+ /* Wait in case it fails to load. */
+ mutex_unlock(&module_mutex);
+ err = wait_event_interruptible(module_wq,
+ finished_loading(mod->name));
+ if (err)
+ goto free_module;
+ goto again;
+ }
+ err = -EEXIST;
+ mutex_unlock(&module_mutex);
+ goto free_module;
+ }
+ list_add_rcu(&mod->list, &modules);
+ mutex_unlock(&module_mutex);
+
#ifdef CONFIG_MODULE_SIG
mod->sig_ok = info->sig_ok;
if (!mod->sig_ok)
/* Now module is in final location, initialize linked lists, etc. */
err = module_unload_init(mod);
if (err)
- goto free_module;
+ goto unlink_mod;
/* Now we've got everything in the final locations, we can
* find optional sections. */
goto free_arch_cleanup;
}
- /* Mark state as coming so strong_try_module_get() ignores us. */
- mod->state = MODULE_STATE_COMING;
-
- /* Now sew it into the lists so we can get lockdep and oops
- * info during argument parsing. No one should access us, since
- * strong_try_module_get() will fail.
- * lockdep/oops can run asynchronous, so use the RCU list insertion
- * function to insert in a way safe to concurrent readers.
- * The mutex protects against concurrent writers.
- */
-again:
- mutex_lock(&module_mutex);
- if ((old = find_module(mod->name)) != NULL) {
- if (old->state == MODULE_STATE_COMING) {
- /* Wait in case it fails to load. */
- mutex_unlock(&module_mutex);
- err = wait_event_interruptible(module_wq,
- finished_loading(mod->name));
- if (err)
- goto free_arch_cleanup;
- goto again;
- }
- err = -EEXIST;
- goto unlock;
- }
-
- /* This has to be done once we're sure module name is unique. */
dynamic_debug_setup(info->debug, info->num_debug);
- /* Find duplicate symbols */
+ mutex_lock(&module_mutex);
+ /* Find duplicate symbols (must be called under lock). */
err = verify_export_symbols(mod);
if (err < 0)
- goto ddebug;
+ goto ddebug_cleanup;
+ /* This relies on module_mutex for list integrity. */
module_bug_finalize(info->hdr, info->sechdrs, mod);
- list_add_rcu(&mod->list, &modules);
+
+ /* Mark state as coming so strong_try_module_get() ignores us,
+ * but kallsyms etc. can see us. */
+ mod->state = MODULE_STATE_COMING;
+
mutex_unlock(&module_mutex);
/* Module is ready to execute: parsing args may do that. */
err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp,
-32768, 32767, &ddebug_dyndbg_module_param_cb);
if (err < 0)
- goto unlink;
+ goto bug_cleanup;
/* Link in to syfs. */
err = mod_sysfs_setup(mod, info, mod->kp, mod->num_kp);
if (err < 0)
- goto unlink;
+ goto bug_cleanup;
/* Get rid of temporary copy. */
free_copy(info);
return do_init_module(mod);
- unlink:
+ bug_cleanup:
+ /* module_bug_cleanup needs module_mutex protection */
mutex_lock(&module_mutex);
- /* Unlink carefully: kallsyms could be walking list. */
- list_del_rcu(&mod->list);
module_bug_cleanup(mod);
- wake_up_all(&module_wq);
- ddebug:
- dynamic_debug_remove(info->debug);
- unlock:
+ ddebug_cleanup:
mutex_unlock(&module_mutex);
+ dynamic_debug_remove(info->debug);
synchronize_sched();
kfree(mod->args);
free_arch_cleanup:
free_modinfo(mod);
free_unload:
module_unload_free(mod);
+ unlink_mod:
+ mutex_lock(&module_mutex);
+ /* Unlink carefully: kallsyms could be walking list. */
+ list_del_rcu(&mod->list);
+ wake_up_all(&module_wq);
+ mutex_unlock(&module_mutex);
free_module:
module_deallocate(mod, info);
free_copy:
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (within_module_init(addr, mod) ||
within_module_core(addr, mod)) {
if (modname)
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (within_module_init(addr, mod) ||
within_module_core(addr, mod)) {
const char *sym;
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (within_module_init(addr, mod) ||
within_module_core(addr, mod)) {
const char *sym;
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (symnum < mod->num_symtab) {
*value = mod->symtab[symnum].st_value;
*type = mod->symtab[symnum].st_info;
ret = mod_find_symname(mod, colon+1);
*colon = ':';
} else {
- list_for_each_entry_rcu(mod, &modules, list)
+ list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if ((ret = mod_find_symname(mod, name)) != 0)
break;
+ }
}
preempt_enable();
return ret;
int ret;
list_for_each_entry(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
for (i = 0; i < mod->num_symtab; i++) {
ret = fn(data, mod->strtab + mod->symtab[i].st_name,
mod, mod->symtab[i].st_value);
{
int bx = 0;
+ BUG_ON(mod->state == MODULE_STATE_UNFORMED);
if (mod->taints ||
mod->state == MODULE_STATE_GOING ||
mod->state == MODULE_STATE_COMING) {
struct module *mod = list_entry(p, struct module, list);
char buf[8];
+ /* We always ignore unformed modules. */
+ if (mod->state == MODULE_STATE_UNFORMED)
+ return 0;
+
seq_printf(m, "%s %u",
mod->name, mod->init_size + mod->core_size);
print_unload_info(m, mod);
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (mod->num_exentries == 0)
continue;
if (addr < module_addr_min || addr > module_addr_max)
return NULL;
- list_for_each_entry_rcu(mod, &modules, list)
+ list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
if (within_module_core(addr, mod)
|| within_module_init(addr, mod))
return mod;
+ }
return NULL;
}
EXPORT_SYMBOL_GPL(__module_address);
printk(KERN_DEFAULT "Modules linked in:");
/* Most callers should already have preempt disabled, but make sure */
preempt_disable();
- list_for_each_entry_rcu(mod, &modules, list)
+ list_for_each_entry_rcu(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
printk(" %s%s", mod->name, module_flags(mod, buf));
+ }
preempt_enable();
if (last_unloaded_module[0])
printk(" [last unloaded: %s]", last_unloaded_module);
* TASK_KILLABLE sleeps.
*/
if (child->jobctl & JOBCTL_STOP_PENDING || task_is_traced(child))
- signal_wake_up(child, task_is_traced(child));
+ ptrace_signal_wake_up(child, true);
spin_unlock(&child->sighand->siglock);
}
+/* Ensure that nothing can wake it up, even SIGKILL */
+static bool ptrace_freeze_traced(struct task_struct *task)
+{
+ bool ret = false;
+
+ /* Lockless, nobody but us can set this flag */
+ if (task->jobctl & JOBCTL_LISTENING)
+ return ret;
+
+ spin_lock_irq(&task->sighand->siglock);
+ if (task_is_traced(task) && !__fatal_signal_pending(task)) {
+ task->state = __TASK_TRACED;
+ ret = true;
+ }
+ spin_unlock_irq(&task->sighand->siglock);
+
+ return ret;
+}
+
+static void ptrace_unfreeze_traced(struct task_struct *task)
+{
+ if (task->state != __TASK_TRACED)
+ return;
+
+ WARN_ON(!task->ptrace || task->parent != current);
+
+ spin_lock_irq(&task->sighand->siglock);
+ if (__fatal_signal_pending(task))
+ wake_up_state(task, __TASK_TRACED);
+ else
+ task->state = TASK_TRACED;
+ spin_unlock_irq(&task->sighand->siglock);
+}
+
/**
* ptrace_check_attach - check whether ptracee is ready for ptrace operation
* @child: ptracee to check for
* RETURNS:
* 0 on success, -ESRCH if %child is not ready.
*/
-int ptrace_check_attach(struct task_struct *child, bool ignore_state)
+static int ptrace_check_attach(struct task_struct *child, bool ignore_state)
{
int ret = -ESRCH;
* be changed by us so it's not changing right after this.
*/
read_lock(&tasklist_lock);
- if ((child->ptrace & PT_PTRACED) && child->parent == current) {
+ if (child->ptrace && child->parent == current) {
+ WARN_ON(child->state == __TASK_TRACED);
/*
* child->sighand can't be NULL, release_task()
* does ptrace_unlink() before __exit_signal().
*/
- spin_lock_irq(&child->sighand->siglock);
- WARN_ON_ONCE(task_is_stopped(child));
- if (ignore_state || (task_is_traced(child) &&
- !(child->jobctl & JOBCTL_LISTENING)))
+ if (ignore_state || ptrace_freeze_traced(child))
ret = 0;
- spin_unlock_irq(&child->sighand->siglock);
}
read_unlock(&tasklist_lock);
- if (!ret && !ignore_state)
- ret = wait_task_inactive(child, TASK_TRACED) ? 0 : -ESRCH;
+ if (!ret && !ignore_state) {
+ if (!wait_task_inactive(child, __TASK_TRACED)) {
+ /*
+ * This can only happen if may_ptrace_stop() fails and
+ * ptrace_stop() changes ->state back to TASK_RUNNING,
+ * so we should not worry about leaking __TASK_TRACED.
+ */
+ WARN_ON(child->state == __TASK_TRACED);
+ ret = -ESRCH;
+ }
+ }
- /* All systems go.. */
return ret;
}
*/
if (task_is_stopped(task) &&
task_set_jobctl_pending(task, JOBCTL_TRAP_STOP | JOBCTL_TRAPPING))
- signal_wake_up(task, 1);
+ signal_wake_up_state(task, __TASK_STOPPED);
spin_unlock(&task->sighand->siglock);
* tracee into STOP.
*/
if (likely(task_set_jobctl_pending(child, JOBCTL_TRAP_STOP)))
- signal_wake_up(child, child->jobctl & JOBCTL_LISTENING);
+ ptrace_signal_wake_up(child, child->jobctl & JOBCTL_LISTENING);
unlock_task_sighand(child, &flags);
ret = 0;
* start of this trap and now. Trigger re-trap.
*/
if (child->jobctl & JOBCTL_TRAP_NOTIFY)
- signal_wake_up(child, true);
+ ptrace_signal_wake_up(child, true);
ret = 0;
}
unlock_task_sighand(child, &flags);
goto out_put_task_struct;
ret = arch_ptrace(child, request, addr, data);
+ if (ret || request != PTRACE_DETACH)
+ ptrace_unfreeze_traced(child);
out_put_task_struct:
put_task_struct(child);
ret = ptrace_check_attach(child, request == PTRACE_KILL ||
request == PTRACE_INTERRUPT);
- if (!ret)
+ if (!ret) {
ret = compat_arch_ptrace(child, request, addr, data);
+ if (ret || request != PTRACE_DETACH)
+ ptrace_unfreeze_traced(child);
+ }
out_put_task_struct:
put_task_struct(child);
*/
int wake_up_process(struct task_struct *p)
{
- return try_to_wake_up(p, TASK_ALL, 0);
+ WARN_ON(task_is_stopped_or_traced(p));
+ return try_to_wake_up(p, TASK_NORMAL, 0);
}
EXPORT_SYMBOL(wake_up_process);
* No need to set need_resched since signal event passing
* goes through ->blocked
*/
-void signal_wake_up(struct task_struct *t, int resume)
+void signal_wake_up_state(struct task_struct *t, unsigned int state)
{
- unsigned int mask;
-
set_tsk_thread_flag(t, TIF_SIGPENDING);
-
/*
- * For SIGKILL, we want to wake it up in the stopped/traced/killable
+ * TASK_WAKEKILL also means wake it up in the stopped/traced/killable
* case. We don't check t->state here because there is a race with it
* executing another processor and just now entering stopped state.
* By using wake_up_state, we ensure the process will wake up and
* handle its death signal.
*/
- mask = TASK_INTERRUPTIBLE;
- if (resume)
- mask |= TASK_WAKEKILL;
- if (!wake_up_state(t, mask))
+ if (!wake_up_state(t, state | TASK_INTERRUPTIBLE))
kick_process(t);
}
assert_spin_locked(&t->sighand->siglock);
task_set_jobctl_pending(t, JOBCTL_TRAP_NOTIFY);
- signal_wake_up(t, t->jobctl & JOBCTL_LISTENING);
+ ptrace_signal_wake_up(t, t->jobctl & JOBCTL_LISTENING);
}
/*
* If SIGKILL was already sent before the caller unlocked
* ->siglock we must see ->core_state != NULL. Otherwise it
* is safe to enter schedule().
+ *
+ * This is almost outdated, a task with the pending SIGKILL can't
+ * block in TASK_TRACED. But PTRACE_EVENT_EXIT can be reported
+ * after SIGKILL was already dequeued.
*/
if (unlikely(current->mm->core_state) &&
unlikely(current->mm == current->parent->mm))
if (gstop_done)
do_notify_parent_cldstop(current, false, why);
+ /* tasklist protects us from ptrace_freeze_traced() */
__set_current_state(TASK_RUNNING);
if (clear_code)
current->exit_code = 0;
#ifdef CONFIG_COMPAT
#ifdef CONFIG_GENERIC_SIGALTSTACK
-asmlinkage long compat_sys_sigaltstack(const compat_stack_t __user *uss_ptr,
- compat_stack_t __user *uoss_ptr)
+COMPAT_SYSCALL_DEFINE2(sigaltstack,
+ const compat_stack_t __user *, uss_ptr,
+ compat_stack_t __user *, uoss_ptr)
{
stack_t uss, uoss;
int ret;
return -EINTR;
/*
- * We block until we read something and tracing is enabled.
+ * We block until we read something and tracing is disabled.
* We still block if tracing is disabled, but we have never
* read anything. This allows a user to cat this file, and
* then enable tracing. But after we have read something,
*
* iter->pos will be 0 if we haven't read anything.
*/
- if (tracing_is_enabled() && iter->pos)
+ if (!tracing_is_enabled() && iter->pos)
break;
}
return ret;
if (buffer) {
- if (val)
+ mutex_lock(&trace_types_lock);
+ if (val) {
ring_buffer_record_on(buffer);
- else
+ if (current_trace->start)
+ current_trace->start(tr);
+ } else {
ring_buffer_record_off(buffer);
+ if (current_trace->stop)
+ current_trace->stop(tr);
+ }
+ mutex_unlock(&trace_types_lock);
}
(*ppos)++;
}
#ifdef CONFIG_MODULES
+/* Updates are protected by module mutex */
static LIST_HEAD(module_bug_list);
static const struct bug_entry *module_find_bug(unsigned long bugaddr)
static const struct ethtool_ops default_ethtool_ops;
+void netdev_set_default_ethtool_ops(struct net_device *dev,
+ const struct ethtool_ops *ops)
+{
+ if (dev->ethtool_ops == &default_ethtool_ops)
+ dev->ethtool_ops = ops;
+}
+EXPORT_SYMBOL_GPL(netdev_set_default_ethtool_ops);
+
/**
* alloc_netdev_mqs - allocate network device
* @sizeof_priv: size of private data to allocate space for
case IP_TTL:
if (optlen < 1)
goto e_inval;
- if (val != -1 && (val < 0 || val > 255))
+ if (val != -1 && (val < 1 || val > 255))
goto e_inval;
inet->uc_ttl = val;
break;
}
#endif
-static inline struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off)
+static struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off)
{
struct sk_buff *skb;
u32 offset;
- skb_queue_walk(&sk->sk_receive_queue, skb) {
+ while ((skb = skb_peek(&sk->sk_receive_queue)) != NULL) {
offset = seq - TCP_SKB_CB(skb)->seq;
if (tcp_hdr(skb)->syn)
offset--;
*off = offset;
return skb;
}
+ /* This looks weird, but this can happen if TCP collapsing
+ * splitted a fat GRO packet, while we released socket lock
+ * in skb_splice_bits()
+ */
+ sk_eat_skb(sk, skb, false);
}
return NULL;
}
break;
}
used = recv_actor(desc, skb, offset, len);
- if (used < 0) {
+ if (used <= 0) {
if (!copied)
copied = used;
break;
tcp_rcv_space_adjust(sk);
/* Clean up data we have read: This will do ACK frames. */
- if (copied > 0)
+ if (copied > 0) {
+ tcp_recv_skb(sk, seq, &offset);
tcp_cleanup_rbuf(sk, copied);
+ }
return copied;
}
EXPORT_SYMBOL(tcp_read_sock);
if (len < (th->doff << 2) || tcp_checksum_complete_user(sk, skb))
goto csum_error;
- if (!th->ack)
+ if (!th->ack && !th->rst)
goto discard;
/*
goto discard;
}
- if (!th->ack)
+ if (!th->ack && !th->rst)
goto discard;
if (!tcp_validate_incoming(sk, skb, th, 0))
unsigned long event);
static int addrconf_ifdown(struct net_device *dev, int how);
+static struct rt6_info *addrconf_get_prefix_route(const struct in6_addr *pfx,
+ int plen,
+ const struct net_device *dev,
+ u32 flags, u32 noflags);
+
static void addrconf_dad_start(struct inet6_ifaddr *ifp);
static void addrconf_dad_timer(unsigned long data);
static void addrconf_dad_completed(struct inet6_ifaddr *ifp);
return !qdisc_tx_is_noop(dev);
}
-/* Check if a route is valid prefix route */
-static inline int addrconf_is_prefix_route(const struct rt6_info *rt)
-{
- return (rt->rt6i_flags & (RTF_GATEWAY | RTF_DEFAULT)) == 0;
-}
-
static void addrconf_del_timer(struct inet6_ifaddr *ifp)
{
if (del_timer(&ifp->timer))
if ((ifp->flags & IFA_F_PERMANENT) && onlink < 1) {
struct in6_addr prefix;
struct rt6_info *rt;
- struct net *net = dev_net(ifp->idev->dev);
- struct flowi6 fl6 = {};
ipv6_addr_prefix(&prefix, &ifp->addr, ifp->prefix_len);
- fl6.flowi6_oif = ifp->idev->dev->ifindex;
- fl6.daddr = prefix;
- rt = (struct rt6_info *)ip6_route_lookup(net, &fl6,
- RT6_LOOKUP_F_IFACE);
- if (rt != net->ipv6.ip6_null_entry &&
- addrconf_is_prefix_route(rt)) {
+ rt = addrconf_get_prefix_route(&prefix,
+ ifp->prefix_len,
+ ifp->idev->dev,
+ 0, RTF_GATEWAY | RTF_DEFAULT);
+
+ if (rt) {
if (onlink == 0) {
ip6_del_rt(rt);
rt = NULL;
continue;
if ((rt->rt6i_flags & flags) != flags)
continue;
- if ((noflags != 0) && ((rt->rt6i_flags & flags) != 0))
+ if ((rt->rt6i_flags & noflags) != 0)
continue;
dst_hold(&rt->dst);
break;
if (old_probe_resp)
kfree_rcu(old_probe_resp, rcu_head);
+ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
+ sta_info_flush(local, vlan);
sta_info_flush(local, sdata);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
#include <linux/nl80211.h>
#include <linux/export.h>
+#include <linux/rtnetlink.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
ctx = container_of(conf, struct ieee80211_chanctx, conf);
+ if (sdata->vif.type == NL80211_IFTYPE_AP) {
+ struct ieee80211_sub_if_data *vlan;
+
+ /* for the VLAN list */
+ ASSERT_RTNL();
+ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
+ rcu_assign_pointer(vlan->vif.chanctx_conf, NULL);
+ }
+
ieee80211_unassign_vif_chanctx(sdata, ctx);
if (ctx->refcount == 0)
ieee80211_free_chanctx(local, ctx);
goto out;
}
+ if (sdata->vif.type == NL80211_IFTYPE_AP) {
+ struct ieee80211_sub_if_data *vlan;
+
+ /* for the VLAN list */
+ ASSERT_RTNL();
+ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
+ rcu_assign_pointer(vlan->vif.chanctx_conf, &ctx->conf);
+ }
+
ieee80211_recalc_smps_chanctx(local, ctx);
out:
mutex_unlock(&local->chanctx_mtx);
mutex_unlock(&sdata->local->chanctx_mtx);
}
+void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_sub_if_data *ap;
+ struct ieee80211_chanctx_conf *conf;
+
+ if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->bss))
+ return;
+
+ ap = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap);
+
+ mutex_lock(&local->chanctx_mtx);
+
+ conf = rcu_dereference_protected(ap->vif.chanctx_conf,
+ lockdep_is_held(&local->chanctx_mtx));
+ rcu_assign_pointer(sdata->vif.chanctx_conf, conf);
+ mutex_unlock(&local->chanctx_mtx);
+}
+
void ieee80211_iter_chan_contexts_atomic(
struct ieee80211_hw *hw,
void (*iter)(struct ieee80211_hw *hw,
sdata_info(sdata,
"No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)\n");
- ieee80211_request_internal_scan(sdata,
- ifibss->ssid, ifibss->ssid_len, NULL);
+ ieee80211_request_ibss_scan(sdata, ifibss->ssid, ifibss->ssid_len,
+ NULL);
}
static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
IEEE80211_SCAN_INTERVAL)) {
sdata_info(sdata, "Trigger new scan to find an IBSS to join\n");
- ieee80211_request_internal_scan(sdata,
- ifibss->ssid, ifibss->ssid_len,
- ifibss->fixed_channel ? ifibss->channel : NULL);
+ ieee80211_request_ibss_scan(sdata, ifibss->ssid,
+ ifibss->ssid_len, chan);
} else {
int interval = IEEE80211_SCAN_INTERVAL;
u32 device_ts;
- u8 dtim_period;
-
bool wmm_used;
bool uapsd_supported;
/**
* enum ieee80211_valid_data_flags - BSS valid data flags
- * @IEEE80211_BSS_VALID_DTIM: DTIM data was gathered from non-corrupt IE
* @IEEE80211_BSS_VALID_WMM: WMM/UAPSD data was gathered from non-corrupt IE
* @IEEE80211_BSS_VALID_RATES: Supported rates were gathered from non-corrupt IE
* @IEEE80211_BSS_VALID_ERP: ERP flag was gathered from non-corrupt IE
* beacon/probe response.
*/
enum ieee80211_bss_valid_data_flags {
- IEEE80211_BSS_VALID_DTIM = BIT(0),
IEEE80211_BSS_VALID_WMM = BIT(1),
IEEE80211_BSS_VALID_RATES = BIT(2),
IEEE80211_BSS_VALID_ERP = BIT(3)
unsigned long timers_running; /* used for quiesce/restart */
bool powersave; /* powersave requested for this iface */
bool broken_ap; /* AP is broken -- turn off powersave */
+ u8 dtim_period;
enum ieee80211_smps_mode req_smps, /* requested smps mode */
driver_smps_mode; /* smps mode request */
u32 mntr_flags;
} u;
+ spinlock_t cleanup_stations_lock;
+ struct list_head cleanup_stations;
+ struct work_struct cleanup_stations_wk;
+
#ifdef CONFIG_MAC80211_DEBUGFS
struct {
struct dentry *dir;
/* scan/BSS handling */
void ieee80211_scan_work(struct work_struct *work);
-int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
- const u8 *ssid, u8 ssid_len,
- struct ieee80211_channel *chan);
+int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata,
+ const u8 *ssid, u8 ssid_len,
+ struct ieee80211_channel *chan);
int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
struct cfg80211_scan_request *req);
void ieee80211_scan_cancel(struct ieee80211_local *local);
const struct cfg80211_chan_def *chandef,
enum ieee80211_chanctx_mode mode);
void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata);
+void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local,
struct ieee80211_chanctx *chanctx);
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
- int meshhdrlen;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
-
- /* FIX: what would be proper limits for MTU?
- * This interface uses 802.3 frames. */
- if (new_mtu < 256 ||
- new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
+ if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN)
return -EINVAL;
- }
dev->mtu = new_mtu;
return 0;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
- /* no need to tell driver, but set carrier */
- if (rtnl_dereference(sdata->bss->beacon))
+ /* no need to tell driver, but set carrier and chanctx */
+ if (rtnl_dereference(sdata->bss->beacon)) {
+ ieee80211_vif_vlan_copy_chanctx(sdata);
netif_carrier_on(dev);
- else
+ } else {
netif_carrier_off(dev);
+ }
break;
case NL80211_IFTYPE_MONITOR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
list_del(&sdata->u.vlan.list);
+ rcu_assign_pointer(sdata->vif.chanctx_conf, NULL);
/* no need to tell driver */
break;
case NL80211_IFTYPE_MONITOR:
cancel_work_sync(&sdata->work);
/*
* When we get here, the interface is marked down.
- * Call rcu_barrier() to wait both for the RX path
+ * Call synchronize_rcu() to wait for the RX path
* should it be using the interface and enqueuing
- * frames at this very time on another CPU, and
- * for the sta free call_rcu callbacks.
- */
- rcu_barrier();
-
- /*
- * free_sta_rcu() enqueues a work for the actual
- * sta cleanup, so we need to flush it while
- * sdata is still valid.
+ * frames at this very time on another CPU.
*/
- flush_workqueue(local->workqueue);
-
+ synchronize_rcu();
skb_queue_purge(&sdata->skb_queue);
/*
mutex_unlock(&local->iflist_mtx);
}
+static void ieee80211_cleanup_sdata_stas_wk(struct work_struct *wk)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ sdata = container_of(wk, struct ieee80211_sub_if_data, cleanup_stations_wk);
+
+ ieee80211_cleanup_sdata_stas(sdata);
+}
+
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct wireless_dev **new_wdev, enum nl80211_iftype type,
struct vif_params *params)
INIT_LIST_HEAD(&sdata->key_list);
+ spin_lock_init(&sdata->cleanup_stations_lock);
+ INIT_LIST_HEAD(&sdata->cleanup_stations);
+ INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk);
+
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[i];
return -ENOMEM;
sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
for (i = 0; i < RMC_BUCKETS; i++)
- INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
+ INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i]);
return 0;
}
return;
for (i = 0; i < RMC_BUCKETS; i++)
- list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
+ list_for_each_entry_safe(p, n, &rmc->bucket[i], list) {
list_del(&p->list);
kmem_cache_free(rm_cache, p);
}
/* Don't care about endianness since only match matters */
memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
- list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
+ list_for_each_entry_safe(p, n, &rmc->bucket[idx], list) {
++entries;
if (time_after(jiffies, p->exp_time) ||
(entries == RMC_QUEUE_MAX_LEN)) {
p->seqnum = seqnum;
p->exp_time = jiffies + RMC_TIMEOUT;
memcpy(p->sa, sa, ETH_ALEN);
- list_add(&p->list, &rmc->bucket[idx].list);
+ list_add(&p->list, &rmc->bucket[idx]);
return 0;
}
};
struct mesh_rmc {
- struct rmc_entry bucket[RMC_BUCKETS];
+ struct list_head bucket[RMC_BUCKETS];
u32 idx_mask;
};
if (beaconint_us > latency) {
local->ps_sdata = NULL;
} else {
- struct ieee80211_bss *bss;
int maxslp = 1;
- u8 dtimper;
-
- bss = (void *)found->u.mgd.associated->priv;
- dtimper = bss->dtim_period;
+ u8 dtimper = found->u.mgd.dtim_period;
/* If the TIM IE is invalid, pretend the value is 1 */
if (!dtimper)
ieee80211_led_assoc(local, 1);
- if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD)
- bss_conf->dtim_period = bss->dtim_period;
- else
+ if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) {
+ /*
+ * If the AP is buggy we may get here with no DTIM period
+ * known, so assume it's 1 which is the only safe assumption
+ * in that case, although if the TIM IE is broken powersave
+ * probably just won't work at all.
+ */
+ bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
+ } else {
bss_conf->dtim_period = 0;
+ }
bss_conf->assoc = 1;
sdata->u.mgd.timers_running = 0;
+ sdata->vif.bss_conf.dtim_period = 0;
+
ifmgd->flags = 0;
ieee80211_vif_release_channel(sdata);
}
struct ieee80211_channel *channel;
bool need_ps = false;
- if (sdata->u.mgd.associated &&
- ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) {
- bss = (void *)sdata->u.mgd.associated->priv;
+ if ((sdata->u.mgd.associated &&
+ ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) ||
+ (sdata->u.mgd.assoc_data &&
+ ether_addr_equal(mgmt->bssid,
+ sdata->u.mgd.assoc_data->bss->bssid))) {
/* not previously set so we may need to recalc */
- need_ps = !bss->dtim_period;
+ need_ps = sdata->u.mgd.associated && !sdata->u.mgd.dtim_period;
+
+ if (elems->tim && !elems->parse_error) {
+ struct ieee80211_tim_ie *tim_ie = elems->tim;
+ sdata->u.mgd.dtim_period = tim_ie->dtim_period;
+ }
}
if (elems->ds_params && elems->ds_params_len == 1)
/* kick off associate process */
ifmgd->assoc_data = assoc_data;
+ ifmgd->dtim_period = 0;
err = ieee80211_prep_connection(sdata, req->bss, true);
if (err)
goto err_clear;
- if (!bss->dtim_period &&
- sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) {
- /*
- * Wait up to one beacon interval ...
- * should this be more if we miss one?
- */
- sdata_info(sdata, "waiting for beacon from %pM\n",
- ifmgd->bssid);
- assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
+ if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) {
+ const struct cfg80211_bss_ies *beacon_ies;
+
+ rcu_read_lock();
+ beacon_ies = rcu_dereference(req->bss->beacon_ies);
+ if (!beacon_ies) {
+ /*
+ * Wait up to one beacon interval ...
+ * should this be more if we miss one?
+ */
+ sdata_info(sdata, "waiting for beacon from %pM\n",
+ ifmgd->bssid);
+ assoc_data->timeout =
+ TU_TO_EXP_TIME(req->bss->beacon_interval);
+ } else {
+ const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
+ beacon_ies->data,
+ beacon_ies->len);
+ if (tim_ie && tim_ie[1] >=
+ sizeof(struct ieee80211_tim_ie)) {
+ const struct ieee80211_tim_ie *tim;
+ tim = (void *)(tim_ie + 2);
+ ifmgd->dtim_period = tim->dtim_period;
+ }
+ assoc_data->have_beacon = true;
+ assoc_data->sent_assoc = false;
+ assoc_data->timeout = jiffies;
+ }
+ rcu_read_unlock();
} else {
assoc_data->have_beacon = true;
assoc_data->sent_assoc = false;
bss->valid_data |= IEEE80211_BSS_VALID_ERP;
}
- if (elems->tim && (!elems->parse_error ||
- !(bss->valid_data & IEEE80211_BSS_VALID_DTIM))) {
- struct ieee80211_tim_ie *tim_ie = elems->tim;
- bss->dtim_period = tim_ie->dtim_period;
- if (!elems->parse_error)
- bss->valid_data |= IEEE80211_BSS_VALID_DTIM;
- }
-
- /* If the beacon had no TIM IE, or it was invalid, use 1 */
- if (beacon && !bss->dtim_period)
- bss->dtim_period = 1;
-
/* replace old supported rates if we get new values */
if (!elems->parse_error ||
!(bss->valid_data & IEEE80211_BSS_VALID_RATES)) {
return res;
}
-int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
- const u8 *ssid, u8 ssid_len,
- struct ieee80211_channel *chan)
+int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata,
+ const u8 *ssid, u8 ssid_len,
+ struct ieee80211_channel *chan)
{
struct ieee80211_local *local = sdata->local;
int ret = -EBUSY;
/* fill internal scan request */
if (!chan) {
- int i, nchan = 0;
+ int i, max_n;
+ int n_ch = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!local->hw.wiphy->bands[band])
continue;
- for (i = 0;
- i < local->hw.wiphy->bands[band]->n_channels;
- i++) {
- local->int_scan_req->channels[nchan] =
+
+ max_n = local->hw.wiphy->bands[band]->n_channels;
+ for (i = 0; i < max_n; i++) {
+ struct ieee80211_channel *tmp_ch =
&local->hw.wiphy->bands[band]->channels[i];
- nchan++;
+
+ if (tmp_ch->flags & (IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_DISABLED))
+ continue;
+
+ local->int_scan_req->channels[n_ch] = tmp_ch;
+ n_ch++;
}
}
- local->int_scan_req->n_channels = nchan;
+ if (WARN_ON_ONCE(n_ch == 0))
+ goto unlock;
+
+ local->int_scan_req->n_channels = n_ch;
} else {
+ if (WARN_ON_ONCE(chan->flags & (IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_DISABLED)))
+ goto unlock;
+
local->int_scan_req->channels[0] = chan;
local->int_scan_req->n_channels = 1;
}
return -ENOENT;
}
-static void free_sta_work(struct work_struct *wk)
+static void cleanup_single_sta(struct sta_info *sta)
{
- struct sta_info *sta = container_of(wk, struct sta_info, free_sta_wk);
int ac, i;
struct tid_ampdu_tx *tid_tx;
struct ieee80211_sub_if_data *sdata = sta->sdata;
sta_info_free(local, sta);
}
+void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata)
+{
+ struct sta_info *sta;
+
+ spin_lock_bh(&sdata->cleanup_stations_lock);
+ while (!list_empty(&sdata->cleanup_stations)) {
+ sta = list_first_entry(&sdata->cleanup_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&sdata->cleanup_stations_lock);
+
+ cleanup_single_sta(sta);
+
+ spin_lock_bh(&sdata->cleanup_stations_lock);
+ }
+
+ spin_unlock_bh(&sdata->cleanup_stations_lock);
+}
+
static void free_sta_rcu(struct rcu_head *h)
{
struct sta_info *sta = container_of(h, struct sta_info, rcu_head);
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
- ieee80211_queue_work(&sta->local->hw, &sta->free_sta_wk);
+ spin_lock(&sdata->cleanup_stations_lock);
+ list_add_tail(&sta->list, &sdata->cleanup_stations);
+ spin_unlock(&sdata->cleanup_stations_lock);
+
+ ieee80211_queue_work(&sdata->local->hw, &sdata->cleanup_stations_wk);
}
/* protected by RCU */
spin_lock_init(&sta->lock);
INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
- INIT_WORK(&sta->free_sta_wk, free_sta_work);
INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
mutex_init(&sta->ampdu_mlme.mtx);
void sta_info_stop(struct ieee80211_local *local)
{
- del_timer(&local->sta_cleanup);
+ del_timer_sync(&local->sta_cleanup);
sta_info_flush(local, NULL);
}
}
mutex_unlock(&local->sta_mtx);
+ rcu_barrier();
+
+ if (sdata) {
+ ieee80211_cleanup_sdata_stas(sdata);
+ cancel_work_sync(&sdata->cleanup_stations_wk);
+ } else {
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ ieee80211_cleanup_sdata_stas(sdata);
+ cancel_work_sync(&sdata->cleanup_stations_wk);
+ }
+ mutex_unlock(&local->iflist_mtx);
+ }
+
return ret;
}
spinlock_t lock;
struct work_struct drv_unblock_wk;
- struct work_struct free_sta_wk;
u16 listen_interval;
void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta);
+void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata);
+
#endif /* STA_INFO_H */
/* allow mac80211 to determine the timeout */
wdev->ps_timeout = -1;
- if (!dev->ethtool_ops)
- dev->ethtool_ops = &cfg80211_ethtool_ops;
+ netdev_set_default_ethtool_ops(dev, &cfg80211_ethtool_ops);
if ((wdev->iftype == NL80211_IFTYPE_STATION ||
wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
struct dev_cgroup *dev_cgroup;
dev_cgroup = cgroup_to_devcgroup(cgroup);
+ mutex_lock(&devcgroup_mutex);
dev_exception_clean(dev_cgroup);
+ mutex_unlock(&devcgroup_mutex);
kfree(dev_cgroup);
}
rc = __vfs_setxattr_noperm(dentry, XATTR_NAME_EVM,
&xattr_data,
sizeof(xattr_data), 0);
- }
- else if (rc == -ENODATA)
+ } else if (rc == -ENODATA && inode->i_op->removexattr) {
rc = inode->i_op->removexattr(dentry, XATTR_NAME_EVM);
+ }
return rc;
}
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <sound/ac97_codec.h>
#include <sound/pxa2xx-lib.h>
static inline void pxa_ac97_cold_pxa27x(void)
{
+ unsigned int timeout;
+
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
clk_enable(ac97conf_clk);
udelay(5);
clk_disable(ac97conf_clk);
- GCR = GCR_COLD_RST;
- udelay(50);
+ GCR = GCR_COLD_RST | GCR_WARM_RST;
+ timeout = 100; /* wait for the codec-ready bit to be set */
+ while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+ mdelay(1);
}
#endif
}
if (cpu_is_pxa27x()) {
- /* Use GPIO 113 as AC97 Reset on Bulverde */
+ /*
+ * This gpio is needed for a work-around to a bug in the ac97
+ * controller during warm reset. The direction and level is set
+ * here so that it is an output driven high when switching from
+ * AC97_nRESET alt function to generic gpio.
+ */
+ ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH,
+ "pxa27x ac97 reset");
+ if (ret < 0) {
+ pr_err("%s: gpio_request_one() failed: %d\n",
+ __func__, ret);
+ goto err_conf;
+ }
pxa27x_assert_ac97reset(reset_gpio, 0);
+
ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
if (IS_ERR(ac97conf_clk)) {
ret = PTR_ERR(ac97conf_clk);
void pxa2xx_ac97_hw_remove(struct platform_device *dev)
{
+ if (cpu_is_pxa27x())
+ gpio_free(reset_gpio);
GCR |= GCR_ACLINK_OFF;
free_irq(IRQ_AC97, NULL);
if (ac97conf_clk) {
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
/* quirks for Intel PCH */
-#define AZX_DCAPS_INTEL_PCH \
+#define AZX_DCAPS_INTEL_PCH_NOPM \
(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
- AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME)
+ AZX_DCAPS_COUNT_LPIB_DELAY)
+
+#define AZX_DCAPS_INTEL_PCH \
+ (AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* PBG */
{ PCI_DEVICE(0x8086, 0x1d20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
return 0;
}
-#ifdef CONFIG_PM
-static int conexant_suspend(struct hda_codec *codec)
-{
- snd_hda_shutup_pins(codec);
- return 0;
-}
-#endif
-
static const struct hda_codec_ops conexant_patch_ops = {
.build_controls = conexant_build_controls,
.build_pcms = conexant_build_pcms,
.init = conexant_init,
.free = conexant_free,
.set_power_state = conexant_set_power,
-#ifdef CONFIG_PM
- .suspend = conexant_suspend,
-#endif
- .reboot_notify = snd_hda_shutup_pins,
};
#ifdef CONFIG_SND_HDA_INPUT_BEEP
.init = cx_auto_init,
.free = conexant_free,
.unsol_event = snd_hda_jack_unsol_event,
-#ifdef CONFIG_PM
- .suspend = conexant_suspend,
-#endif
- .reboot_notify = snd_hda_shutup_pins,
};
/*
ctl_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
substream = snd_pcm_chmap_substream(info, ctl_idx);
if (!substream || !substream->runtime)
- return -EBADFD;
+ return 0; /* just for avoiding error from alsactl restore */
switch (substream->runtime->status->state) {
case SNDRV_PCM_STATE_OPEN:
case SNDRV_PCM_STATE_SETUP:
ALC269_TYPE_ALC269VB,
ALC269_TYPE_ALC269VC,
ALC269_TYPE_ALC269VD,
+ ALC269_TYPE_ALC280,
+ ALC269_TYPE_ALC282,
+ ALC269_TYPE_ALC284,
};
/*
switch (spec->codec_variant) {
case ALC269_TYPE_ALC269VA:
case ALC269_TYPE_ALC269VC:
+ case ALC269_TYPE_ALC280:
+ case ALC269_TYPE_ALC284:
ssids = alc269va_ssids;
break;
case ALC269_TYPE_ALC269VB:
case ALC269_TYPE_ALC269VD:
+ case ALC269_TYPE_ALC282:
ssids = alc269_ssids;
break;
default:
alc_auto_parse_customize_define(codec);
- if (codec->vendor_id == 0x10ec0269) {
+ switch (codec->vendor_id) {
+ case 0x10ec0269:
spec->codec_variant = ALC269_TYPE_ALC269VA;
switch (alc_get_coef0(codec) & 0x00f0) {
case 0x0010:
goto error;
spec->init_hook = alc269_fill_coef;
alc269_fill_coef(codec);
+ break;
+
+ case 0x10ec0280:
+ case 0x10ec0290:
+ spec->codec_variant = ALC269_TYPE_ALC280;
+ break;
+ case 0x10ec0282:
+ case 0x10ec0283:
+ spec->codec_variant = ALC269_TYPE_ALC282;
+ break;
+ case 0x10ec0284:
+ case 0x10ec0292:
+ spec->codec_variant = ALC269_TYPE_ALC284;
+ break;
}
/* automatic parse from the BIOS config */
{ .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
{ .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 },
{ .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 },
+ { .id = 0x10ec0284, .name = "ALC284", .patch = patch_alc269 },
{ .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 },
{ .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
*/
/* status */
#define HDSPM_AES32_wcLock 0x0200000
+#define HDSPM_AES32_wcSync 0x0100000
#define HDSPM_AES32_wcFreq_bit 22
/* (status >> HDSPM_AES32_wcFreq_bit) & 0xF gives WC frequency (cf function
HDSPM_bit2freq */
switch (hdspm->io_type) {
case AES32:
status = hdspm_read(hdspm, HDSPM_statusRegister);
- if (status & HDSPM_wcSync)
- return 2;
- else if (status & HDSPM_wcLock)
- return 1;
+ if (status & HDSPM_AES32_wcLock) {
+ if (status & HDSPM_AES32_wcSync)
+ return 2;
+ else
+ return 1;
+ }
return 0;
break;
unsigned int status;
unsigned int status2;
unsigned int timecode;
+ unsigned int wcLock, wcSync;
int pref_syncref;
char *autosync_ref;
int x;
snd_iprintf(buffer, "--- Status:\n");
+ wcLock = status & HDSPM_AES32_wcLock;
+ wcSync = wcLock && (status & HDSPM_AES32_wcSync);
+
snd_iprintf(buffer, "Word: %s Frequency: %d\n",
- (status & HDSPM_AES32_wcLock) ? "Sync " : "No Lock",
+ (wcLock) ? (wcSync ? "Sync " : "Lock ") : "No Lock",
HDSPM_bit2freq((status >> HDSPM_AES32_wcFreq_bit) & 0xF));
for (x = 0; x < 8; x++) {
case SND_SOC_DAIFMT_DSP_A:
mode = 0;
break;
- case SND_SOC_DAIFMT_DSP_B:
- mode = 1;
- break;
case SND_SOC_DAIFMT_I2S:
mode = 2;
break;
- case SND_SOC_DAIFMT_LEFT_J:
- mode = 3;
- break;
default:
arizona_aif_err(dai, "Unsupported DAI format %d\n",
fmt & SND_SOC_DAIFMT_FORMAT_MASK);
snd_soc_update_bits(codec, ARIZONA_ASYNC_SAMPLE_RATE_1,
ARIZONA_ASYNC_SAMPLE_RATE_MASK, sr_val);
snd_soc_update_bits(codec, base + ARIZONA_AIF_RATE_CTRL,
- ARIZONA_AIF1_RATE_MASK, 8);
+ ARIZONA_AIF1_RATE_MASK,
+ 8 << ARIZONA_AIF1_RATE_SHIFT);
break;
default:
arizona_aif_err(dai, "Invalid clock %d\n", dai_priv->clk);
#define ARIZONA_FLL_SRC_MCLK1 0
#define ARIZONA_FLL_SRC_MCLK2 1
-#define ARIZONA_FLL_SRC_SLIMCLK 2
-#define ARIZONA_FLL_SRC_FLL1 3
-#define ARIZONA_FLL_SRC_FLL2 4
-#define ARIZONA_FLL_SRC_AIF1BCLK 5
-#define ARIZONA_FLL_SRC_AIF2BCLK 6
-#define ARIZONA_FLL_SRC_AIF3BCLK 7
-#define ARIZONA_FLL_SRC_AIF1LRCLK 8
-#define ARIZONA_FLL_SRC_AIF2LRCLK 9
-#define ARIZONA_FLL_SRC_AIF3LRCLK 10
+#define ARIZONA_FLL_SRC_SLIMCLK 3
+#define ARIZONA_FLL_SRC_FLL1 4
+#define ARIZONA_FLL_SRC_FLL2 5
+#define ARIZONA_FLL_SRC_AIF1BCLK 8
+#define ARIZONA_FLL_SRC_AIF2BCLK 9
+#define ARIZONA_FLL_SRC_AIF3BCLK 10
+#define ARIZONA_FLL_SRC_AIF1LRCLK 12
+#define ARIZONA_FLL_SRC_AIF2LRCLK 13
+#define ARIZONA_FLL_SRC_AIF3LRCLK 14
#define ARIZONA_MIXER_VOL_MASK 0x00FE
#define ARIZONA_MIXER_VOL_SHIFT 1
struct cs4271_platform_data *cs4271plat = codec->dev->platform_data;
int ret;
int gpio_nreset = -EINVAL;
- int amutec_eq_bmutec = 0;
+ bool amutec_eq_bmutec = false;
#ifdef CONFIG_OF
if (of_match_device(cs4271_dt_ids, codec->dev)) {
gpio_nreset = of_get_named_gpio(codec->dev->of_node,
"reset-gpio", 0);
- if (!of_get_property(codec->dev->of_node,
+ if (of_get_property(codec->dev->of_node,
"cirrus,amutec-eq-bmutec", NULL))
- amutec_eq_bmutec = 1;
+ amutec_eq_bmutec = true;
}
#endif
static int cs42l52_get_clk(int mclk, int rate)
{
- int i, ret = 0;
+ int i, ret = -EINVAL;
u_int mclk1, mclk2 = 0;
for (i = 0; i < ARRAY_SIZE(clk_map_table); i++) {
}
}
}
- if (ret > ARRAY_SIZE(clk_map_table))
- return -EINVAL;
return ret;
}
{ 101, 0x00 },
{ 102, 0x00 },
{ 103, 0x01 },
- { 105, 0x01 },
- { 106, 0x00 },
- { 107, 0x01 },
+ { 104, 0x01 },
+ { 105, 0x00 },
+ { 106, 0x01 },
{ 107, 0x00 },
{ 108, 0x00 },
{ 109, 0x00 },
{ 184, 0x00 },
{ 185, 0x00 },
{ 186, 0x00 },
- { 189, 0x00 },
+ { 187, 0x00 },
{ 188, 0x00 },
- { 194, 0x00 },
- { 195, 0x00 },
- { 196, 0x00 },
- { 197, 0x00 },
- { 200, 0x00 },
- { 201, 0x00 },
- { 202, 0x00 },
- { 203, 0x00 },
- { 204, 0x00 },
- { 205, 0x00 },
- { 208, 0x00 },
+ { 189, 0x00 },
+ { 208, 0x06 },
{ 209, 0x00 },
- { 210, 0x00 },
- { 211, 0x00 },
- { 213, 0x00 },
- { 214, 0x00 },
- { 215, 0x00 },
- { 216, 0x00 },
- { 217, 0x00 },
- { 218, 0x00 },
- { 219, 0x00 },
+ { 210, 0x08 },
+ { 211, 0x54 },
+ { 212, 0x14 },
+ { 213, 0x0d },
+ { 214, 0x0d },
+ { 215, 0x14 },
+ { 216, 0x60 },
{ 221, 0x00 },
{ 222, 0x00 },
+ { 223, 0x00 },
{ 224, 0x00 },
- { 225, 0x00 },
- { 226, 0x00 },
- { 227, 0x00 },
- { 228, 0x00 },
- { 229, 0x00 },
- { 230, 0x13 },
- { 231, 0x00 },
- { 232, 0x80 },
- { 233, 0x0C },
- { 234, 0xDD },
- { 235, 0x00 },
- { 236, 0x04 },
- { 237, 0x00 },
- { 238, 0x00 },
- { 239, 0x00 },
- { 240, 0x00 },
- { 241, 0x00 },
- { 242, 0x00 },
- { 243, 0x00 },
- { 244, 0x00 },
- { 245, 0x00 },
{ 248, 0x00 },
{ 249, 0x00 },
- { 254, 0x00 },
+ { 250, 0x00 },
{ 255, 0x00 },
};
};
/* TLV Declarations */
-static const DECLARE_TLV_DB_SCALE(digital_tlv, -7650, 150, 1);
-static const DECLARE_TLV_DB_SCALE(port_tlv, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(adc_dac_tlv, -7650, 150, 1);
+static const DECLARE_TLV_DB_SCALE(mic_tlv, 0, 200, 1);
+static const DECLARE_TLV_DB_SCALE(port_tlv, -1800, 600, 0);
+static const DECLARE_TLV_DB_SCALE(stn_tlv, -7200, 150, 0);
static const struct snd_kcontrol_new lm49453_sidetone_mixer_controls[] = {
/* Sidetone supports mono only */
SOC_DAPM_SINGLE_TLV("Sidetone ADCL Volume", LM49453_P0_STN_VOL_ADCL_REG,
- 0, 0x3F, 0, digital_tlv),
+ 0, 0x3F, 0, stn_tlv),
SOC_DAPM_SINGLE_TLV("Sidetone ADCR Volume", LM49453_P0_STN_VOL_ADCR_REG,
- 0, 0x3F, 0, digital_tlv),
+ 0, 0x3F, 0, stn_tlv),
SOC_DAPM_SINGLE_TLV("Sidetone DMIC1L Volume", LM49453_P0_STN_VOL_DMIC1L_REG,
- 0, 0x3F, 0, digital_tlv),
+ 0, 0x3F, 0, stn_tlv),
SOC_DAPM_SINGLE_TLV("Sidetone DMIC1R Volume", LM49453_P0_STN_VOL_DMIC1R_REG,
- 0, 0x3F, 0, digital_tlv),
+ 0, 0x3F, 0, stn_tlv),
SOC_DAPM_SINGLE_TLV("Sidetone DMIC2L Volume", LM49453_P0_STN_VOL_DMIC2L_REG,
- 0, 0x3F, 0, digital_tlv),
+ 0, 0x3F, 0, stn_tlv),
SOC_DAPM_SINGLE_TLV("Sidetone DMIC2R Volume", LM49453_P0_STN_VOL_DMIC2R_REG,
- 0, 0x3F, 0, digital_tlv),
+ 0, 0x3F, 0, stn_tlv),
};
static const struct snd_kcontrol_new lm49453_snd_controls[] = {
/* mic1 and mic2 supports mono only */
- SOC_SINGLE_TLV("Mic1 Volume", LM49453_P0_ADC_LEVELL_REG, 0, 6,
- 0, digital_tlv),
- SOC_SINGLE_TLV("Mic2 Volume", LM49453_P0_ADC_LEVELR_REG, 0, 6,
- 0, digital_tlv),
+ SOC_SINGLE_TLV("Mic1 Volume", LM49453_P0_MICL_REG, 0, 15, 0, mic_tlv),
+ SOC_SINGLE_TLV("Mic2 Volume", LM49453_P0_MICR_REG, 0, 15, 0, mic_tlv),
+
+ SOC_SINGLE_TLV("ADCL Volume", LM49453_P0_ADC_LEVELL_REG, 0, 63,
+ 0, adc_dac_tlv),
+ SOC_SINGLE_TLV("ADCR Volume", LM49453_P0_ADC_LEVELR_REG, 0, 63,
+ 0, adc_dac_tlv),
SOC_DOUBLE_R_TLV("DMIC1 Volume", LM49453_P0_DMIC1_LEVELL_REG,
- LM49453_P0_DMIC1_LEVELR_REG, 0, 6, 0, digital_tlv),
+ LM49453_P0_DMIC1_LEVELR_REG, 0, 63, 0, adc_dac_tlv),
SOC_DOUBLE_R_TLV("DMIC2 Volume", LM49453_P0_DMIC2_LEVELL_REG,
- LM49453_P0_DMIC2_LEVELR_REG, 0, 6, 0, digital_tlv),
+ LM49453_P0_DMIC2_LEVELR_REG, 0, 63, 0, adc_dac_tlv),
SOC_DAPM_ENUM("Mic2Mode", lm49453_mic2mode_enum),
SOC_DAPM_ENUM("DMIC12 SRC", lm49453_dmic12_cfg_enum),
2, 1, 0),
SOC_DOUBLE_R_TLV("DAC HP Volume", LM49453_P0_DAC_HP_LEVELL_REG,
- LM49453_P0_DAC_HP_LEVELR_REG, 0, 6, 0, digital_tlv),
+ LM49453_P0_DAC_HP_LEVELR_REG, 0, 63, 0, adc_dac_tlv),
SOC_DOUBLE_R_TLV("DAC LO Volume", LM49453_P0_DAC_LO_LEVELL_REG,
- LM49453_P0_DAC_LO_LEVELR_REG, 0, 6, 0, digital_tlv),
+ LM49453_P0_DAC_LO_LEVELR_REG, 0, 63, 0, adc_dac_tlv),
SOC_DOUBLE_R_TLV("DAC LS Volume", LM49453_P0_DAC_LS_LEVELL_REG,
- LM49453_P0_DAC_LS_LEVELR_REG, 0, 6, 0, digital_tlv),
+ LM49453_P0_DAC_LS_LEVELR_REG, 0, 63, 0, adc_dac_tlv),
SOC_DOUBLE_R_TLV("DAC HA Volume", LM49453_P0_DAC_HA_LEVELL_REG,
- LM49453_P0_DAC_HA_LEVELR_REG, 0, 6, 0, digital_tlv),
+ LM49453_P0_DAC_HA_LEVELR_REG, 0, 63, 0, adc_dac_tlv),
SOC_SINGLE_TLV("EP Volume", LM49453_P0_DAC_LS_LEVELL_REG,
- 0, 6, 0, digital_tlv),
+ 0, 63, 0, adc_dac_tlv),
SOC_SINGLE_TLV("PORT1_1_RX_LVL Volume", LM49453_P0_PORT1_RX_LVL1_REG,
0, 3, 0, port_tlv),
}
snd_soc_update_bits(codec, LM49453_P0_AUDIO_PORT1_BASIC_REG,
- LM49453_AUDIO_PORT1_BASIC_FMT_MASK|BIT(1)|BIT(5),
+ LM49453_AUDIO_PORT1_BASIC_FMT_MASK|BIT(0)|BIT(5),
(aif_val | mode | clk_phase));
snd_soc_write(codec, LM49453_P0_AUDIO_PORT1_RX_MSB_REG, clk_shift);
5, 1, 0),
SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
- 0, 4, 0, mic_gain_tlv),
+ 0, 3, 0, mic_gain_tlv),
};
/* mute the codec used by alsa core */
SGTL5000_HP_ZCD_EN |
SGTL5000_ADC_ZCD_EN);
- snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0);
+ snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2);
/*
* disable DAP
SNDRV_PCM_FMTBIT_S32_LE)
#define S2PC_VALUE 0x98
#define CLOCK_OUT 0x60
-#define LEFT_J_DATA_FORMAT 0x10
-#define I2S_DATA_FORMAT 0x12
-#define RIGHT_J_DATA_FORMAT 0x14
+#define DATA_FORMAT_MSK 0x0E
+#define LEFT_J_DATA_FORMAT 0x00
+#define I2S_DATA_FORMAT 0x02
+#define RIGHT_J_DATA_FORMAT 0x04
#define CODEC_MUTE_VAL 0x80
#define POWER_CNTLMSAK 0x40
return -EINVAL;
}
- snd_soc_update_bits(codec, STA529_S2PCFG0, 0x0D, mode);
+ snd_soc_update_bits(codec, STA529_S2PCFG0, DATA_FORMAT_MSK, mode);
return 0;
}
ret = wm2000_read(i2c, WM2000_REG_SPEECH_CLARITY);
if (wm2000->speech_clarity)
- ret &= ~WM2000_SPEECH_CLARITY;
- else
ret |= WM2000_SPEECH_CLARITY;
+ else
+ ret &= ~WM2000_SPEECH_CLARITY;
wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, ret);
wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33);
case SND_SOC_DAIFMT_DSP_A:
fmt_val = 0;
break;
- case SND_SOC_DAIFMT_DSP_B:
- fmt_val = 1;
- break;
case SND_SOC_DAIFMT_I2S:
fmt_val = 2;
break;
- case SND_SOC_DAIFMT_LEFT_J:
- fmt_val = 3;
- break;
default:
dev_err(codec->dev, "Unsupported DAI format %d\n",
fmt & SND_SOC_DAIFMT_FORMAT_MASK);
WM2200_AIF1TX_LRCLK_MSTR | WM2200_AIF1TX_LRCLK_INV,
lrclk);
snd_soc_update_bits(codec, WM2200_AUDIO_IF_1_5,
- WM2200_AIF1_FMT_MASK << 1, fmt_val << 1);
+ WM2200_AIF1_FMT_MASK, fmt_val);
return 0;
}
case SND_SOC_DAIFMT_DSP_A:
mask = 0;
break;
- case SND_SOC_DAIFMT_DSP_B:
- mask = 1;
- break;
case SND_SOC_DAIFMT_I2S:
mask = 2;
break;
- case SND_SOC_DAIFMT_LEFT_J:
- mask = 3;
- break;
default:
dev_err(codec->dev, "Unsupported DAI format %d\n",
fmt & SND_SOC_DAIFMT_FORMAT_MASK);
struct wm5102_priv {
struct arizona_priv core;
struct arizona_fll fll[2];
+
+ unsigned int spk_ena:2;
+ unsigned int spk_ena_pending:1;
};
static DECLARE_TLV_DB_SCALE(ana_tlv, 0, 100, 0);
ARIZONA_MIXER_CONTROLS("AIF3TX2", ARIZONA_AIF3TX2MIX_INPUT_1_SOURCE),
};
+static int wm5102_spk_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct arizona *arizona = dev_get_drvdata(codec->dev->parent);
+ struct wm5102_priv *wm5102 = snd_soc_codec_get_drvdata(codec);
+
+ if (arizona->rev < 1)
+ return 0;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ if (!wm5102->spk_ena) {
+ snd_soc_write(codec, 0x4f5, 0x25a);
+ wm5102->spk_ena_pending = true;
+ }
+ break;
+ case SND_SOC_DAPM_POST_PMU:
+ if (wm5102->spk_ena_pending) {
+ msleep(75);
+ snd_soc_write(codec, 0x4f5, 0xda);
+ wm5102->spk_ena_pending = false;
+ wm5102->spk_ena++;
+ }
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ wm5102->spk_ena--;
+ if (!wm5102->spk_ena)
+ snd_soc_write(codec, 0x4f5, 0x25a);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ if (!wm5102->spk_ena)
+ snd_soc_write(codec, 0x4f5, 0x0da);
+ break;
+ }
+
+ return 0;
+}
+
+
ARIZONA_MIXER_ENUMS(EQ1, ARIZONA_EQ1MIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(EQ2, ARIZONA_EQ2MIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(EQ3, ARIZONA_EQ3MIX_INPUT_1_SOURCE);
ARIZONA_OUT3L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_E("OUT4L", ARIZONA_OUTPUT_ENABLES_1,
- ARIZONA_OUT4L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
+ ARIZONA_OUT4L_ENA_SHIFT, 0, NULL, 0, wm5102_spk_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_E("OUT4R", ARIZONA_OUTPUT_ENABLES_1,
- ARIZONA_OUT4R_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
+ ARIZONA_OUT4R_ENA_SHIFT, 0, NULL, 0, wm5102_spk_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_E("OUT5L", ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT5L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
const struct wm_adsp_region *mem;
const char *region_name;
char *file, *text;
+ void *buf;
unsigned int reg;
int regions = 0;
int ret, offset, type, sizes;
}
if (reg) {
- ret = regmap_raw_write(regmap, reg, region->data,
+ buf = kmemdup(region->data, le32_to_cpu(region->len),
+ GFP_KERNEL);
+ if (!buf) {
+ adsp_err(dsp, "Out of memory\n");
+ return -ENOMEM;
+ }
+
+ ret = regmap_raw_write(regmap, reg, buf,
le32_to_cpu(region->len));
+
+ kfree(buf);
+
if (ret != 0) {
adsp_err(dsp,
"%s.%d: Failed to write %d bytes at %d in %s: %d\n",
const char *region_name;
int ret, pos, blocks, type, offset, reg;
char *file;
+ void *buf;
file = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (file == NULL)
}
if (reg) {
+ buf = kmemdup(blk->data, le32_to_cpu(blk->len),
+ GFP_KERNEL);
+ if (!buf) {
+ adsp_err(dsp, "Out of memory\n");
+ return -ENOMEM;
+ }
+
ret = regmap_raw_write(regmap, reg, blk->data,
le32_to_cpu(blk->len));
if (ret != 0) {
"%s.%d: Failed to write to %x in %s\n",
file, blocks, reg, region_name);
}
+
+ kfree(buf);
}
pos += le32_to_cpu(blk->len) + sizeof(*blk);
INIT_LIST_HEAD(&rtd->dpcm[SNDRV_PCM_STREAM_CAPTURE].fe_clients);
ret = device_add(rtd->dev);
if (ret < 0) {
+ /* calling put_device() here to free the rtd->dev */
+ put_device(rtd->dev);
dev_err(card->dev,
"ASoC: failed to register runtime device: %d\n", ret);
return ret;
/* unregister the rtd device */
if (rtd->dev_registered) {
device_remove_file(rtd->dev, &dev_attr_codec_reg);
- device_del(rtd->dev);
+ device_unregister(rtd->dev);
rtd->dev_registered = 0;
}
platform_max = mc->platform_max;
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 1;
+ uinfo->count = snd_soc_volsw_is_stereo(mc) ? 2 : 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = platform_max - min;
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
+ unsigned int rreg = mc->rreg;
unsigned int shift = mc->shift;
int min = mc->min;
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
unsigned int val, val_mask;
+ int ret;
val = ((ucontrol->value.integer.value[0] + min) & mask);
if (invert)
val_mask = mask << shift;
val = val << shift;
- return snd_soc_update_bits_locked(codec, reg, val_mask, val);
+ ret = snd_soc_update_bits_locked(codec, reg, val_mask, val);
+ if (ret != 0)
+ return ret;
+
+ if (snd_soc_volsw_is_stereo(mc)) {
+ val = ((ucontrol->value.integer.value[1] + min) & mask);
+ if (invert)
+ val = max - val;
+ val_mask = mask << shift;
+ val = val << shift;
+
+ ret = snd_soc_update_bits_locked(codec, rreg, val_mask, val);
+ }
+
+ return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_put_volsw_range);
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
+ unsigned int rreg = mc->rreg;
unsigned int shift = mc->shift;
int min = mc->min;
int max = mc->max;
ucontrol->value.integer.value[0] =
ucontrol->value.integer.value[0] - min;
+ if (snd_soc_volsw_is_stereo(mc)) {
+ ucontrol->value.integer.value[1] =
+ (snd_soc_read(codec, rreg) >> shift) & mask;
+ if (invert)
+ ucontrol->value.integer.value[1] =
+ max - ucontrol->value.integer.value[1];
+ ucontrol->value.integer.value[1] =
+ ucontrol->value.integer.value[1] - min;
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_get_volsw_range);
if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
(be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) &&
(be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_FREE) &&
+ (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED) &&
(be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP))
continue;
{ 0 } /* terminator */
};
+static struct usbmix_selector_map c400_selectors[] = {
+ {
+ .id = 0x80,
+ .count = 2,
+ .names = (const char*[]) {"Internal", "SPDIF"}
+ },
+ { 0 } /* terminator */
+};
+
static struct usbmix_selector_map audigy2nx_selectors[] = {
{
.id = 14, /* Capture Source */
.id = USB_ID(0x06f8, 0xc000),
.map = hercules_usb51_map,
},
+ {
+ .id = USB_ID(0x0763, 0x2030),
+ .selector_map = c400_selectors,
+ },
{
.id = USB_ID(0x08bb, 0x2702),
.map = linex_map,
* are valid they presents mono controls as L and R channels of
* stereo. So we provide a good mixer here.
*/
-struct std_mono_table ebox44_table[] = {
+static struct std_mono_table ebox44_table[] = {
{
.unitid = 4,
.control = 1,
struct snd_usb_substream *sync_subs =
&subs->stream->substream[subs->direction ^ 1];
+ if (subs->sync_endpoint->type != SND_USB_ENDPOINT_TYPE_DATA ||
+ !subs->stream)
+ return snd_usb_endpoint_set_params(subs->sync_endpoint,
+ subs->pcm_format,
+ subs->channels,
+ subs->period_bytes,
+ subs->cur_rate,
+ subs->cur_audiofmt,
+ NULL);
+
/* Try to find the best matching audioformat. */
list_for_each_entry(fp, &sync_subs->fmt_list, list) {
int score = match_endpoint_audioformats(fp, subs->cur_audiofmt,
.rate_table = (unsigned int[]) {
44100, 48000, 88200, 96000
},
- .clock = 0x81,
+ .clock = 0x80,
}
},
/* Capture */
.rate_table = (unsigned int[]) {
44100, 48000, 88200, 96000
},
- .clock = 0x81,
+ .clock = 0x80,
}
},
/* MIDI */
* rules
*/
err = usb_driver_set_configuration(dev, 2);
- if (err < 0) {
+ if (err < 0)
snd_printdd("error usb_driver_set_configuration: %d\n",
err);
- return -ENODEV;
- }
+ /* Always return an error, so that we stop creating a device
+ that will just be destroyed and recreated with a new
+ configuration */
+ return -ENODEV;
} else
snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
if ((le16_to_cpu(ep->chip->dev->descriptor.idVendor) == 0x23ba) &&
ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
ep->skip_packets = 4;
+
+ /*
+ * M-Audio Fast Track C400 - when packets are not skipped, real world
+ * latency varies by approx. +/- 50 frames (at 96KHz) each time the
+ * stream is (re)started. When skipping packets 16 at endpoint start
+ * up, the real world latency is stable within +/- 1 frame (also
+ * across power cycles).
+ */
+ if (ep->chip->usb_id == USB_ID(0x0763, 0x2030) &&
+ ep->type == SND_USB_ENDPOINT_TYPE_DATA)
+ ep->skip_packets = 16;
}
void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
projects / linux-2.6-block.git / commitdiff