If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
+++ /dev/null
-* Wondermedia I2C Controller
-
-Required properties :
-
- - compatible : should be "wm,wm8505-i2c"
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number
- - clocks : phandle to the I2C clock source
-
-Optional properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
- Valid values are 100000 and 400000.
- Default to 100000 if not specified, or invalid value.
-
-Example :
-
- i2c_0: i2c@d8280000 {
- compatible = "wm,wm8505-i2c";
- reg = <0xd8280000 0x1000>;
- interrupts = <19>;
- clocks = <&clki2c0>;
- clock-frequency = <400000>;
- };
--- /dev/null
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+ Valid values are 100000 and 400000.
+ Default to 100000 if not specified, or invalid value.
+
+Example :
+
+ i2c_0: i2c@d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };