xhci: xhci-mem: remove port_arrays and the code initializing them
authorMathias Nyman <mathias.nyman@linux.intel.com>
Mon, 21 May 2018 13:40:04 +0000 (16:40 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 24 May 2018 16:03:09 +0000 (18:03 +0200)
As we are now using the new port strtuctes the port_arrays
are no longer needed, remove them completely

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci.h

index 88192866ab62835f8d24db44964e61ab56a05ab5..0b61b77dd26f20443a24462073d01b0f1a1e8faa 100644 (file)
@@ -1054,8 +1054,7 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
 
 /*
  * The xHCI roothub may have ports of differing speeds in any order in the port
- * status registers.  xhci->port_array provides an array of the port speed for
- * each offset into the port status registers.
+ * status registers.
  *
  * The xHCI hardware wants to know the roothub port number that the USB device
  * is attached to (or the roothub port its ancestor hub is attached to).  All we
@@ -1890,23 +1889,15 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 no_bw:
        xhci->cmd_ring_reserved_trbs = 0;
-       xhci->num_usb2_ports = 0;
-       xhci->num_usb3_ports = 0;
        xhci->usb2_rhub.num_ports = 0;
        xhci->usb3_rhub.num_ports = 0;
        xhci->num_active_eps = 0;
-       kfree(xhci->usb2_ports);
-       kfree(xhci->usb3_ports);
-       kfree(xhci->port_array);
        kfree(xhci->usb2_rhub.ports);
        kfree(xhci->usb3_rhub.ports);
        kfree(xhci->hw_ports);
        kfree(xhci->rh_bw);
        kfree(xhci->ext_caps);
 
-       xhci->usb2_ports = NULL;
-       xhci->usb3_ports = NULL;
-       xhci->port_array = NULL;
        xhci->usb2_rhub.ports = NULL;
        xhci->usb3_rhub.ports = NULL;
        xhci->hw_ports = NULL;
@@ -2196,25 +2187,15 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
        for (i = port_offset; i < (port_offset + port_count); i++) {
                struct xhci_port *hw_port = &xhci->hw_ports[i];
                /* Duplicate entry.  Ignore the port if the revisions differ. */
-               if (xhci->port_array[i] != 0 ||
-                   hw_port->rhub) {
+               if (hw_port->rhub) {
                        xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
                                        " port %u\n", addr, i);
                        xhci_warn(xhci, "Port was marked as USB %u, "
                                        "duplicated as USB %u\n",
-                                       xhci->port_array[i], major_revision);
+                                       hw_port->rhub->maj_rev, major_revision);
                        /* Only adjust the roothub port counts if we haven't
                         * found a similar duplicate.
                         */
-                       if (xhci->port_array[i] != major_revision &&
-                               xhci->port_array[i] != DUPLICATE_ENTRY) {
-                               if (xhci->port_array[i] == 0x03)
-                                       xhci->num_usb3_ports--;
-                               else
-                                       xhci->num_usb2_ports--;
-                               xhci->port_array[i] = DUPLICATE_ENTRY;
-                       }
-                       /* FIXME: Should we disable the port? */
                        if (hw_port->rhub != rhub &&
                                 hw_port->hcd_portnum != DUPLICATE_ENTRY) {
                                hw_port->rhub->num_ports--;
@@ -2222,13 +2203,8 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
                        }
                        continue;
                }
-               xhci->port_array[i] = major_revision;
                hw_port->rhub = rhub;
                rhub->num_ports++;
-               if (major_revision == 0x03)
-                       xhci->num_usb3_ports++;
-               else
-                       xhci->num_usb2_ports++;
        }
        /* FIXME: Should we disable ports not in the Extended Capabilities? */
 }
@@ -2266,14 +2242,13 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
        void __iomem *base;
        u32 offset;
        unsigned int num_ports;
-       int i, j, port_index;
+       int i, j;
        int cap_count = 0;
        u32 cap_start;
 
        num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
-       xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
        xhci->hw_ports = kcalloc(num_ports, sizeof(*xhci->hw_ports), flags);
-       if (!xhci->port_array)
+       if (!xhci->hw_ports)
                return -ENOMEM;
 
        for (i = 0; i < num_ports; i++) {
@@ -2317,41 +2292,34 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 
        while (offset) {
                xhci_add_in_port(xhci, num_ports, base + offset, cap_count);
-               if (xhci->num_usb2_ports + xhci->num_usb3_ports == num_ports)
-                       break;
                if (xhci->usb2_rhub.num_ports + xhci->usb3_rhub.num_ports ==
                    num_ports)
                        break;
                offset = xhci_find_next_ext_cap(base, offset,
                                                XHCI_EXT_CAPS_PROTOCOL);
        }
-
-       if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
-               xhci_warn(xhci, "No ports on the roothubs?\n");
-               return -ENODEV;
-       }
        if (xhci->usb2_rhub.num_ports == 0 && xhci->usb3_rhub.num_ports == 0) {
                xhci_warn(xhci, "No ports on the roothubs?\n");
                return -ENODEV;
        }
        xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-                       "Found %u USB 2.0 ports and %u USB 3.0 ports.",
-                       xhci->num_usb2_ports, xhci->num_usb3_ports);
+                      "Found %u USB 2.0 ports and %u USB 3.0 ports.",
+                      xhci->usb2_rhub.num_ports, xhci->usb3_rhub.num_ports);
 
        /* Place limits on the number of roothub ports so that the hub
         * descriptors aren't longer than the USB core will allocate.
         */
-       if (xhci->num_usb3_ports > USB_SS_MAXPORTS) {
+       if (xhci->usb3_rhub.num_ports > USB_SS_MAXPORTS) {
                xhci_dbg_trace(xhci, trace_xhci_dbg_init,
                                "Limiting USB 3.0 roothub ports to %u.",
                                USB_SS_MAXPORTS);
-               xhci->num_usb3_ports = USB_SS_MAXPORTS;
+               xhci->usb3_rhub.num_ports = USB_SS_MAXPORTS;
        }
-       if (xhci->num_usb2_ports > USB_MAXCHILDREN) {
+       if (xhci->usb2_rhub.num_ports > USB_MAXCHILDREN) {
                xhci_dbg_trace(xhci, trace_xhci_dbg_init,
                                "Limiting USB 2.0 roothub ports to %u.",
                                USB_MAXCHILDREN);
-               xhci->num_usb2_ports = USB_MAXCHILDREN;
+               xhci->usb2_rhub.num_ports = USB_MAXCHILDREN;
        }
 
        /*
@@ -2362,52 +2330,6 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
        xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags);
        xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags);
 
-       if (xhci->num_usb2_ports) {
-               xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
-                               xhci->num_usb2_ports, flags);
-               if (!xhci->usb2_ports)
-                       return -ENOMEM;
-
-               port_index = 0;
-               for (i = 0; i < num_ports; i++) {
-                       if (xhci->port_array[i] == 0x03 ||
-                                       xhci->port_array[i] == 0 ||
-                                       xhci->port_array[i] == DUPLICATE_ENTRY)
-                               continue;
-
-                       xhci->usb2_ports[port_index] =
-                               &xhci->op_regs->port_status_base +
-                               NUM_PORT_REGS*i;
-                       xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-                                       "USB 2.0 port at index %u, "
-                                       "addr = %p", i,
-                                       xhci->usb2_ports[port_index]);
-                       port_index++;
-                       if (port_index == xhci->num_usb2_ports)
-                               break;
-               }
-       }
-       if (xhci->num_usb3_ports) {
-               xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
-                               xhci->num_usb3_ports, flags);
-               if (!xhci->usb3_ports)
-                       return -ENOMEM;
-
-               port_index = 0;
-               for (i = 0; i < num_ports; i++)
-                       if (xhci->port_array[i] == 0x03) {
-                               xhci->usb3_ports[port_index] =
-                                       &xhci->op_regs->port_status_base +
-                                       NUM_PORT_REGS*i;
-                               xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-                                               "USB 3.0 port at index %u, "
-                                               "addr = %p", i,
-                                               xhci->usb3_ports[port_index]);
-                               port_index++;
-                               if (port_index == xhci->num_usb3_ports)
-                                       break;
-                       }
-       }
        return 0;
 }
 
index f1b37d3946b28a515741e6cfa763e0b4080e012d..6c5f00178d0998169282911115ff3591baa4efb0 100644 (file)
@@ -1846,17 +1846,9 @@ struct xhci_hcd {
        unsigned int            limit_active_eps;
        /* There are two roothubs to keep track of bus suspend info for */
        struct xhci_bus_state   bus_state[2];
-       /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
-       u8                      *port_array;
        struct xhci_port        *hw_ports;
-       /* Array of pointers to USB 3.0 PORTSC registers */
-       __le32 __iomem          **usb3_ports;
-       unsigned int            num_usb3_ports;
-       /* Array of pointers to USB 2.0 PORTSC registers */
-       __le32 __iomem          **usb2_ports;
        struct xhci_hub         usb2_rhub;
        struct xhci_hub         usb3_rhub;
-       unsigned int            num_usb2_ports;
        /* support xHCI 0.96 spec USB2 software LPM */
        unsigned                sw_lpm_support:1;
        /* support xHCI 1.0 spec USB2 hardware LPM */