gpio: pca953x: Add optional reset gpio control

Add optional reset-gpios pin control. If present, de-assert the
specified reset gpio pin to bring the chip out of reset.

v2:
- Specify that reset signal to PCA953x chip is active low, in
  binding doc.
- reorder includes in gpio-pca953x.c.
- remove dev_err() on devm_gpiod_get_optional() error return.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
index 08dd15f89ba9d17a08deadad7c355e347cd4961c..e6393571001144bba965d0d72e3d4c50a0b9da8e 100644 (file)
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -29,6 +29,10 @@ Required properties:
        onsemi,pca9654
        exar,xra1202
 
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input. This is an
+               active low signal to the PCA953x.
+
 Example:
 
 

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index d5d72d84b719014feaf38bcdd4b39fdbb67c6b61..d44232aadb6c2224301f45aa665af998e4aa9a4b 100644 (file)
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pca953x.h>
@@ -754,8 +755,16 @@ static int pca953x_probe(struct i2c_client *client,
                invert = pdata->invert;
                chip->names = pdata->names;
        } else {
+               struct gpio_desc *reset_gpio;
+
                chip->gpio_start = -1;
                irq_base = 0;
+
+               /* See if we need to de-assert a reset pin */
+               reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+                                                    GPIOD_OUT_LOW);
+               if (IS_ERR(reset_gpio))
+                       return PTR_ERR(reset_gpio);
        }
 
        chip->client = client;