mtd: mtd_oobtest: printk -> pr_{info,err,crit}
authorVikram Narayanan <vikram186@gmail.com>
Wed, 10 Oct 2012 17:42:02 +0000 (23:12 +0530)
committerArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Thu, 15 Nov 2012 13:37:49 +0000 (15:37 +0200)
Use pr_info() and pr_err() while defining pr_fmt(). This saves a few
characters, joins a few lines, and makes the code a little more readable
(and grep-able).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
drivers/mtd/tests/mtd_oobtest.c

index ed9b62827f1bee15e6f5236e4c47f92cae6bfd5c..e86bb29419a21fe343eda838bc79c74cb660f73f 100644 (file)
@@ -19,6 +19,8 @@
  * Author: Adrian Hunter <ext-adrian.hunter@nokia.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <asm/div64.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -28,8 +30,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 
-#define PRINT_PREF KERN_INFO "mtd_oobtest: "
-
 static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -80,13 +80,12 @@ static int erase_eraseblock(int ebnum)
 
        err = mtd_erase(mtd, &ei);
        if (err) {
-               printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum);
+               pr_err("error %d while erasing EB %d\n", err, ebnum);
                return err;
        }
 
        if (ei.state == MTD_ERASE_FAILED) {
-               printk(PRINT_PREF "some erase error occurred at EB %d\n",
-                      ebnum);
+               pr_err("some erase error occurred at EB %d\n", ebnum);
                return -EIO;
        }
 
@@ -98,7 +97,7 @@ static int erase_whole_device(void)
        int err;
        unsigned int i;
 
-       printk(PRINT_PREF "erasing whole device\n");
+       pr_info("erasing whole device\n");
        for (i = 0; i < ebcnt; ++i) {
                if (bbt[i])
                        continue;
@@ -107,7 +106,7 @@ static int erase_whole_device(void)
                        return err;
                cond_resched();
        }
-       printk(PRINT_PREF "erased %u eraseblocks\n", i);
+       pr_info("erased %u eraseblocks\n", i);
        return 0;
 }
 
@@ -141,9 +140,9 @@ static int write_eraseblock(int ebnum)
                ops.oobbuf    = writebuf;
                err = mtd_write_oob(mtd, addr, &ops);
                if (err || ops.oobretlen != use_len) {
-                       printk(PRINT_PREF "error: writeoob failed at %#llx\n",
+                       pr_err("error: writeoob failed at %#llx\n",
                               (long long)addr);
-                       printk(PRINT_PREF "error: use_len %d, use_offset %d\n",
+                       pr_err("error: use_len %d, use_offset %d\n",
                               use_len, use_offset);
                        errcnt += 1;
                        return err ? err : -1;
@@ -160,7 +159,7 @@ static int write_whole_device(void)
        int err;
        unsigned int i;
 
-       printk(PRINT_PREF "writing OOBs of whole device\n");
+       pr_info("writing OOBs of whole device\n");
        for (i = 0; i < ebcnt; ++i) {
                if (bbt[i])
                        continue;
@@ -168,10 +167,10 @@ static int write_whole_device(void)
                if (err)
                        return err;
                if (i % 256 == 0)
-                       printk(PRINT_PREF "written up to eraseblock %u\n", i);
+                       pr_info("written up to eraseblock %u\n", i);
                cond_resched();
        }
-       printk(PRINT_PREF "written %u eraseblocks\n", i);
+       pr_info("written %u eraseblocks\n", i);
        return 0;
 }
 
@@ -194,17 +193,17 @@ static int verify_eraseblock(int ebnum)
                ops.oobbuf    = readbuf;
                err = mtd_read_oob(mtd, addr, &ops);
                if (err || ops.oobretlen != use_len) {
-                       printk(PRINT_PREF "error: readoob failed at %#llx\n",
+                       pr_err("error: readoob failed at %#llx\n",
                               (long long)addr);
                        errcnt += 1;
                        return err ? err : -1;
                }
                if (memcmp(readbuf, writebuf, use_len)) {
-                       printk(PRINT_PREF "error: verify failed at %#llx\n",
+                       pr_err("error: verify failed at %#llx\n",
                               (long long)addr);
                        errcnt += 1;
                        if (errcnt > 1000) {
-                               printk(PRINT_PREF "error: too many errors\n");
+                               pr_err("error: too many errors\n");
                                return -1;
                        }
                }
@@ -221,29 +220,28 @@ static int verify_eraseblock(int ebnum)
                        ops.oobbuf    = readbuf;
                        err = mtd_read_oob(mtd, addr, &ops);
                        if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
-                               printk(PRINT_PREF "error: readoob failed at "
-                                      "%#llx\n", (long long)addr);
+                               pr_err("error: readoob failed at %#llx\n",
+                                               (long long)addr);
                                errcnt += 1;
                                return err ? err : -1;
                        }
                        if (memcmp(readbuf + use_offset, writebuf, use_len)) {
-                               printk(PRINT_PREF "error: verify failed at "
-                                      "%#llx\n", (long long)addr);
+                               pr_err("error: verify failed at %#llx\n",
+                                               (long long)addr);
                                errcnt += 1;
                                if (errcnt > 1000) {
-                                       printk(PRINT_PREF "error: too many "
-                                              "errors\n");
+                                       pr_err("error: too many errors\n");
                                        return -1;
                                }
                        }
                        for (k = 0; k < use_offset; ++k)
                                if (readbuf[k] != 0xff) {
-                                       printk(PRINT_PREF "error: verify 0xff "
+                                       pr_err("error: verify 0xff "
                                               "failed at %#llx\n",
                                               (long long)addr);
                                        errcnt += 1;
                                        if (errcnt > 1000) {
-                                               printk(PRINT_PREF "error: too "
+                                               pr_err("error: too "
                                                       "many errors\n");
                                                return -1;
                                        }
@@ -251,12 +249,12 @@ static int verify_eraseblock(int ebnum)
                        for (k = use_offset + use_len;
                             k < mtd->ecclayout->oobavail; ++k)
                                if (readbuf[k] != 0xff) {
-                                       printk(PRINT_PREF "error: verify 0xff "
+                                       pr_err("error: verify 0xff "
                                               "failed at %#llx\n",
                                               (long long)addr);
                                        errcnt += 1;
                                        if (errcnt > 1000) {
-                                               printk(PRINT_PREF "error: too "
+                                               pr_err("error: too "
                                                       "many errors\n");
                                                return -1;
                                        }
@@ -286,17 +284,17 @@ static int verify_eraseblock_in_one_go(int ebnum)
        ops.oobbuf    = readbuf;
        err = mtd_read_oob(mtd, addr, &ops);
        if (err || ops.oobretlen != len) {
-               printk(PRINT_PREF "error: readoob failed at %#llx\n",
+               pr_err("error: readoob failed at %#llx\n",
                       (long long)addr);
                errcnt += 1;
                return err ? err : -1;
        }
        if (memcmp(readbuf, writebuf, len)) {
-               printk(PRINT_PREF "error: verify failed at %#llx\n",
+               pr_err("error: verify failed at %#llx\n",
                       (long long)addr);
                errcnt += 1;
                if (errcnt > 1000) {
-                       printk(PRINT_PREF "error: too many errors\n");
+                       pr_err("error: too many errors\n");
                        return -1;
                }
        }
@@ -309,7 +307,7 @@ static int verify_all_eraseblocks(void)
        int err;
        unsigned int i;
 
-       printk(PRINT_PREF "verifying all eraseblocks\n");
+       pr_info("verifying all eraseblocks\n");
        for (i = 0; i < ebcnt; ++i) {
                if (bbt[i])
                        continue;
@@ -317,10 +315,10 @@ static int verify_all_eraseblocks(void)
                if (err)
                        return err;
                if (i % 256 == 0)
-                       printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+                       pr_info("verified up to eraseblock %u\n", i);
                cond_resched();
        }
-       printk(PRINT_PREF "verified %u eraseblocks\n", i);
+       pr_info("verified %u eraseblocks\n", i);
        return 0;
 }
 
@@ -331,7 +329,7 @@ static int is_block_bad(int ebnum)
 
        ret = mtd_block_isbad(mtd, addr);
        if (ret)
-               printk(PRINT_PREF "block %d is bad\n", ebnum);
+               pr_info("block %d is bad\n", ebnum);
        return ret;
 }
 
@@ -341,18 +339,18 @@ static int scan_for_bad_eraseblocks(void)
 
        bbt = kmalloc(ebcnt, GFP_KERNEL);
        if (!bbt) {
-               printk(PRINT_PREF "error: cannot allocate memory\n");
+               pr_err("error: cannot allocate memory\n");
                return -ENOMEM;
        }
 
-       printk(PRINT_PREF "scanning for bad eraseblocks\n");
+       pr_info("scanning for bad eraseblocks\n");
        for (i = 0; i < ebcnt; ++i) {
                bbt[i] = is_block_bad(i) ? 1 : 0;
                if (bbt[i])
                        bad += 1;
                cond_resched();
        }
-       printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+       pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);
        return 0;
 }
 
@@ -368,22 +366,22 @@ static int __init mtd_oobtest_init(void)
        printk(KERN_INFO "=================================================\n");
 
        if (dev < 0) {
-               printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
-               printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+               pr_info("Please specify a valid mtd-device via module paramter\n");
+               pr_crit(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
                return -EINVAL;
        }
 
-       printk(PRINT_PREF "MTD device: %d\n", dev);
+       pr_info("MTD device: %d\n", dev);
 
        mtd = get_mtd_device(NULL, dev);
        if (IS_ERR(mtd)) {
                err = PTR_ERR(mtd);
-               printk(PRINT_PREF "error: cannot get MTD device\n");
+               pr_err("error: cannot get MTD device\n");
                return err;
        }
 
        if (mtd->type != MTD_NANDFLASH) {
-               printk(PRINT_PREF "this test requires NAND flash\n");
+               pr_info("this test requires NAND flash\n");
                goto out;
        }
 
@@ -392,7 +390,7 @@ static int __init mtd_oobtest_init(void)
        ebcnt = tmp;
        pgcnt = mtd->erasesize / mtd->writesize;
 
-       printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
+       pr_info("MTD device size %llu, eraseblock size %u, "
               "page size %u, count of eraseblocks %u, pages per "
               "eraseblock %u, OOB size %u\n",
               (unsigned long long)mtd->size, mtd->erasesize,
@@ -401,12 +399,12 @@ static int __init mtd_oobtest_init(void)
        err = -ENOMEM;
        readbuf = kmalloc(mtd->erasesize, GFP_KERNEL);
        if (!readbuf) {
-               printk(PRINT_PREF "error: cannot allocate memory\n");
+               pr_err("error: cannot allocate memory\n");
                goto out;
        }
        writebuf = kmalloc(mtd->erasesize, GFP_KERNEL);
        if (!writebuf) {
-               printk(PRINT_PREF "error: cannot allocate memory\n");
+               pr_err("error: cannot allocate memory\n");
                goto out;
        }
 
@@ -420,7 +418,7 @@ static int __init mtd_oobtest_init(void)
        vary_offset = 0;
 
        /* First test: write all OOB, read it back and verify */
-       printk(PRINT_PREF "test 1 of 5\n");
+       pr_info("test 1 of 5\n");
 
        err = erase_whole_device();
        if (err)
@@ -440,7 +438,7 @@ static int __init mtd_oobtest_init(void)
         * Second test: write all OOB, a block at a time, read it back and
         * verify.
         */
-       printk(PRINT_PREF "test 2 of 5\n");
+       pr_info("test 2 of 5\n");
 
        err = erase_whole_device();
        if (err)
@@ -453,7 +451,7 @@ static int __init mtd_oobtest_init(void)
 
        /* Check all eraseblocks */
        simple_srand(3);
-       printk(PRINT_PREF "verifying all eraseblocks\n");
+       pr_info("verifying all eraseblocks\n");
        for (i = 0; i < ebcnt; ++i) {
                if (bbt[i])
                        continue;
@@ -461,16 +459,16 @@ static int __init mtd_oobtest_init(void)
                if (err)
                        goto out;
                if (i % 256 == 0)
-                       printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+                       pr_info("verified up to eraseblock %u\n", i);
                cond_resched();
        }
-       printk(PRINT_PREF "verified %u eraseblocks\n", i);
+       pr_info("verified %u eraseblocks\n", i);
 
        /*
         * Third test: write OOB at varying offsets and lengths, read it back
         * and verify.
         */
-       printk(PRINT_PREF "test 3 of 5\n");
+       pr_info("test 3 of 5\n");
 
        err = erase_whole_device();
        if (err)
@@ -503,7 +501,7 @@ static int __init mtd_oobtest_init(void)
        vary_offset = 0;
 
        /* Fourth test: try to write off end of device */
-       printk(PRINT_PREF "test 4 of 5\n");
+       pr_info("test 4 of 5\n");
 
        err = erase_whole_device();
        if (err)
@@ -522,14 +520,14 @@ static int __init mtd_oobtest_init(void)
        ops.ooboffs   = mtd->ecclayout->oobavail;
        ops.datbuf    = NULL;
        ops.oobbuf    = writebuf;
-       printk(PRINT_PREF "attempting to start write past end of OOB\n");
-       printk(PRINT_PREF "an error is expected...\n");
+       pr_info("attempting to start write past end of OOB\n");
+       pr_info("an error is expected...\n");
        err = mtd_write_oob(mtd, addr0, &ops);
        if (err) {
-               printk(PRINT_PREF "error occurred as expected\n");
+               pr_info("error occurred as expected\n");
                err = 0;
        } else {
-               printk(PRINT_PREF "error: can write past end of OOB\n");
+               pr_err("error: can write past end of OOB\n");
                errcnt += 1;
        }
 
@@ -542,19 +540,19 @@ static int __init mtd_oobtest_init(void)
        ops.ooboffs   = mtd->ecclayout->oobavail;
        ops.datbuf    = NULL;
        ops.oobbuf    = readbuf;
-       printk(PRINT_PREF "attempting to start read past end of OOB\n");
-       printk(PRINT_PREF "an error is expected...\n");
+       pr_info("attempting to start read past end of OOB\n");
+       pr_info("an error is expected...\n");
        err = mtd_read_oob(mtd, addr0, &ops);
        if (err) {
-               printk(PRINT_PREF "error occurred as expected\n");
+               pr_info("error occurred as expected\n");
                err = 0;
        } else {
-               printk(PRINT_PREF "error: can read past end of OOB\n");
+               pr_err("error: can read past end of OOB\n");
                errcnt += 1;
        }
 
        if (bbt[ebcnt - 1])
-               printk(PRINT_PREF "skipping end of device tests because last "
+               pr_info("skipping end of device tests because last "
                       "block is bad\n");
        else {
                /* Attempt to write off end of device */
@@ -566,14 +564,14 @@ static int __init mtd_oobtest_init(void)
                ops.ooboffs   = 0;
                ops.datbuf    = NULL;
                ops.oobbuf    = writebuf;
-               printk(PRINT_PREF "attempting to write past end of device\n");
-               printk(PRINT_PREF "an error is expected...\n");
+               pr_info("attempting to write past end of device\n");
+               pr_info("an error is expected...\n");
                err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops);
                if (err) {
-                       printk(PRINT_PREF "error occurred as expected\n");
+                       pr_info("error occurred as expected\n");
                        err = 0;
                } else {
-                       printk(PRINT_PREF "error: wrote past end of device\n");
+                       pr_err("error: wrote past end of device\n");
                        errcnt += 1;
                }
 
@@ -586,14 +584,14 @@ static int __init mtd_oobtest_init(void)
                ops.ooboffs   = 0;
                ops.datbuf    = NULL;
                ops.oobbuf    = readbuf;
-               printk(PRINT_PREF "attempting to read past end of device\n");
-               printk(PRINT_PREF "an error is expected...\n");
+               pr_info("attempting to read past end of device\n");
+               pr_info("an error is expected...\n");
                err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
                if (err) {
-                       printk(PRINT_PREF "error occurred as expected\n");
+                       pr_info("error occurred as expected\n");
                        err = 0;
                } else {
-                       printk(PRINT_PREF "error: read past end of device\n");
+                       pr_err("error: read past end of device\n");
                        errcnt += 1;
                }
 
@@ -610,14 +608,14 @@ static int __init mtd_oobtest_init(void)
                ops.ooboffs   = 1;
                ops.datbuf    = NULL;
                ops.oobbuf    = writebuf;
-               printk(PRINT_PREF "attempting to write past end of device\n");
-               printk(PRINT_PREF "an error is expected...\n");
+               pr_info("attempting to write past end of device\n");
+               pr_info("an error is expected...\n");
                err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops);
                if (err) {
-                       printk(PRINT_PREF "error occurred as expected\n");
+                       pr_info("error occurred as expected\n");
                        err = 0;
                } else {
-                       printk(PRINT_PREF "error: wrote past end of device\n");
+                       pr_err("error: wrote past end of device\n");
                        errcnt += 1;
                }
 
@@ -630,20 +628,20 @@ static int __init mtd_oobtest_init(void)
                ops.ooboffs   = 1;
                ops.datbuf    = NULL;
                ops.oobbuf    = readbuf;
-               printk(PRINT_PREF "attempting to read past end of device\n");
-               printk(PRINT_PREF "an error is expected...\n");
+               pr_info("attempting to read past end of device\n");
+               pr_info("an error is expected...\n");
                err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
                if (err) {
-                       printk(PRINT_PREF "error occurred as expected\n");
+                       pr_info("error occurred as expected\n");
                        err = 0;
                } else {
-                       printk(PRINT_PREF "error: read past end of device\n");
+                       pr_err("error: read past end of device\n");
                        errcnt += 1;
                }
        }
 
        /* Fifth test: write / read across block boundaries */
-       printk(PRINT_PREF "test 5 of 5\n");
+       pr_info("test 5 of 5\n");
 
        /* Erase all eraseblocks */
        err = erase_whole_device();
@@ -652,7 +650,7 @@ static int __init mtd_oobtest_init(void)
 
        /* Write all eraseblocks */
        simple_srand(11);
-       printk(PRINT_PREF "writing OOBs of whole device\n");
+       pr_info("writing OOBs of whole device\n");
        for (i = 0; i < ebcnt - 1; ++i) {
                int cnt = 2;
                int pg;
@@ -674,17 +672,16 @@ static int __init mtd_oobtest_init(void)
                        if (err)
                                goto out;
                        if (i % 256 == 0)
-                               printk(PRINT_PREF "written up to eraseblock "
-                                      "%u\n", i);
+                               pr_info("written up to eraseblock %u\n", i);
                        cond_resched();
                        addr += mtd->writesize;
                }
        }
-       printk(PRINT_PREF "written %u eraseblocks\n", i);
+       pr_info("written %u eraseblocks\n", i);
 
        /* Check all eraseblocks */
        simple_srand(11);
-       printk(PRINT_PREF "verifying all eraseblocks\n");
+       pr_info("verifying all eraseblocks\n");
        for (i = 0; i < ebcnt - 1; ++i) {
                if (bbt[i] || bbt[i + 1])
                        continue;
@@ -702,28 +699,28 @@ static int __init mtd_oobtest_init(void)
                if (err)
                        goto out;
                if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) {
-                       printk(PRINT_PREF "error: verify failed at %#llx\n",
+                       pr_err("error: verify failed at %#llx\n",
                               (long long)addr);
                        errcnt += 1;
                        if (errcnt > 1000) {
-                               printk(PRINT_PREF "error: too many errors\n");
+                               pr_err("error: too many errors\n");
                                goto out;
                        }
                }
                if (i % 256 == 0)
-                       printk(PRINT_PREF "verified up to eraseblock %u\n", i);
+                       pr_info("verified up to eraseblock %u\n", i);
                cond_resched();
        }
-       printk(PRINT_PREF "verified %u eraseblocks\n", i);
+       pr_info("verified %u eraseblocks\n", i);
 
-       printk(PRINT_PREF "finished with %d errors\n", errcnt);
+       pr_info("finished with %d errors\n", errcnt);
 out:
        kfree(bbt);
        kfree(writebuf);
        kfree(readbuf);
        put_mtd_device(mtd);
        if (err)
-               printk(PRINT_PREF "error %d occurred\n", err);
+               pr_info("error %d occurred\n", err);
        printk(KERN_INFO "=================================================\n");
        return err;
 }