ASoC: wm8904: Move regulator acquisition and device identification to I2C
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Sat, 9 Jun 2012 03:41:58 +0000 (11:41 +0800)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Mon, 25 Jun 2012 08:53:52 +0000 (09:53 +0100)
It's more idiomatic to have the resource allocation at this level.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
sound/soc/codecs/wm8904.c

index ecab871573b10d0d95370781abcc8a4b082012a6..b178232c990c8022b23d6cb23b438e748f67fbad 100644 (file)
@@ -314,11 +314,6 @@ static bool wm8904_readable_register(struct device *dev, unsigned int reg)
        }
 }
 
-static int wm8904_reset(struct snd_soc_codec *codec)
-{
-       return snd_soc_write(codec, WM8904_SW_RESET_AND_ID, 0);
-}
-
 static int wm8904_configure_clocking(struct snd_soc_codec *codec)
 {
        struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
@@ -2082,52 +2077,6 @@ static int wm8904_probe(struct snd_soc_codec *codec)
                return ret;
        }
 
-       for (i = 0; i < ARRAY_SIZE(wm8904->supplies); i++)
-               wm8904->supplies[i].supply = wm8904_supply_names[i];
-
-       ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8904->supplies),
-                                wm8904->supplies);
-       if (ret != 0) {
-               dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
-               return ret;
-       }
-
-       ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
-                                   wm8904->supplies);
-       if (ret != 0) {
-               dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
-               goto err_get;
-       }
-
-       ret = snd_soc_read(codec, WM8904_SW_RESET_AND_ID);
-       if (ret < 0) {
-               dev_err(codec->dev, "Failed to read ID register\n");
-               goto err_enable;
-       }
-       if (ret != 0x8904) {
-               dev_err(codec->dev, "Device is not a WM8904, ID is %x\n", ret);
-               ret = -EINVAL;
-               goto err_enable;
-       }
-
-       ret = snd_soc_read(codec, WM8904_REVISION);
-       if (ret < 0) {
-               dev_err(codec->dev, "Failed to read device revision: %d\n",
-                       ret);
-               goto err_enable;
-       }
-       dev_info(codec->dev, "revision %c\n", ret + 'A');
-
-       ret = wm8904_reset(codec);
-       if (ret < 0) {
-               dev_err(codec->dev, "Failed to issue reset\n");
-               goto err_enable;
-       }
-
-       /* Can leave the device powered off until we need it */
-       regcache_cache_only(wm8904->regmap, true);
-       regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
-
        /* Change some default settings - latch VU and enable ZC */
        snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
                            WM8904_ADC_VU, WM8904_ADC_VU);
@@ -2187,19 +2136,12 @@ static int wm8904_probe(struct snd_soc_codec *codec)
        wm8904_add_widgets(codec);
 
        return 0;
-
-err_enable:
-       regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
-err_get:
-       regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
-       return ret;
 }
 
 static int wm8904_remove(struct snd_soc_codec *codec)
 {
        struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 
-       regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
        kfree(wm8904->retune_mobile_texts);
        kfree(wm8904->drc_texts);
 
@@ -2230,7 +2172,8 @@ static __devinit int wm8904_i2c_probe(struct i2c_client *i2c,
                                      const struct i2c_device_id *id)
 {
        struct wm8904_priv *wm8904;
-       int ret;
+       unsigned int val;
+       int ret, i;
 
        wm8904 = devm_kzalloc(&i2c->dev, sizeof(struct wm8904_priv),
                              GFP_KERNEL);
@@ -2249,14 +2192,61 @@ static __devinit int wm8904_i2c_probe(struct i2c_client *i2c,
        i2c_set_clientdata(i2c, wm8904);
        wm8904->pdata = i2c->dev.platform_data;
 
+       for (i = 0; i < ARRAY_SIZE(wm8904->supplies); i++)
+               wm8904->supplies[i].supply = wm8904_supply_names[i];
+
+       ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8904->supplies),
+                                     wm8904->supplies);
+       if (ret != 0) {
+               dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+               return ret;
+       }
+
+       ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
+                                   wm8904->supplies);
+       if (ret != 0) {
+               dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
+               return ret;
+       }
+
+       ret = regmap_read(wm8904->regmap, WM8904_SW_RESET_AND_ID, &val);
+       if (ret < 0) {
+               dev_err(&i2c->dev, "Failed to read ID register: %d\n", ret);
+               goto err_enable;
+       }
+       if (val != 0x8904) {
+               dev_err(&i2c->dev, "Device is not a WM8904, ID is %x\n", val);
+               ret = -EINVAL;
+               goto err_enable;
+       }
+
+       ret = regmap_read(wm8904->regmap, WM8904_REVISION, &val);
+       if (ret < 0) {
+               dev_err(&i2c->dev, "Failed to read device revision: %d\n",
+                       ret);
+               goto err_enable;
+       }
+       dev_info(&i2c->dev, "revision %c\n", val + 'A');
+
+       ret = regmap_write(wm8904->regmap, WM8904_SW_RESET_AND_ID, 0);
+       if (ret < 0) {
+               dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
+               goto err_enable;
+       }
+
+       /* Can leave the device powered off until we need it */
+       regcache_cache_only(wm8904->regmap, true);
+       regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+
        ret = snd_soc_register_codec(&i2c->dev,
                        &soc_codec_dev_wm8904, &wm8904_dai, 1);
        if (ret != 0)
-               goto err;
+               return ret;
 
        return 0;
 
-err:
+err_enable:
+       regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
        return ret;
 }