mmc: dw_mmc: k3: support hi6220
authorZhangfei Gao <zhangfei.gao@linaro.org>
Thu, 14 May 2015 08:45:19 +0000 (16:45 +0800)
committerUlf Hansson <ulf.hansson@linaro.org>
Mon, 1 Jun 2015 07:07:04 +0000 (09:07 +0200)
Support hi6220, tested on hikey board
emmc: support hs
sd: support hs, sdr12, sdr25

Signed-off-by: Jorge A. Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Dan Yuan <yuandan@hisilicon.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/dw_mmc-k3.c

index 650f9cc3f7a6b4bddd98e9c755cdf043835791d8..137670b74faa768934f521a1238d7d3f8a4c35c9 100644 (file)
@@ -8,16 +8,30 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/mfd/syscon.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/dw_mmc.h>
+#include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
+/*
+ * hi6220 sd only support io voltage 1.8v and 3v
+ * Also need config AO_SCTRL_SEL18 accordingly
+ */
+#define AO_SCTRL_SEL18         BIT(10)
+#define AO_SCTRL_CTRL3         0x40C
+
+struct k3_priv {
+       struct regmap   *reg;
+};
+
 static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 {
        int ret;
@@ -33,8 +47,93 @@ static const struct dw_mci_drv_data k3_drv_data = {
        .set_ios                = dw_mci_k3_set_ios,
 };
 
+static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
+{
+       struct k3_priv *priv;
+
+       priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node,
+                                        "hisilicon,peripheral-syscon");
+       if (IS_ERR(priv->reg))
+               priv->reg = NULL;
+
+       host->priv = priv;
+       return 0;
+}
+
+static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+       struct dw_mci_slot *slot = mmc_priv(mmc);
+       struct k3_priv *priv;
+       struct dw_mci *host;
+       int min_uv, max_uv;
+       int ret;
+
+       host = slot->host;
+       priv = host->priv;
+
+       if (!priv || !priv->reg)
+               return 0;
+
+       if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+               ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
+                                        AO_SCTRL_SEL18, 0);
+               min_uv = 3000000;
+               max_uv = 3000000;
+       } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+               ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
+                                        AO_SCTRL_SEL18, AO_SCTRL_SEL18);
+               min_uv = 1800000;
+               max_uv = 1800000;
+       } else {
+               dev_dbg(host->dev, "voltage not supported\n");
+               return -EINVAL;
+       }
+
+       if (ret) {
+               dev_dbg(host->dev, "switch voltage failed\n");
+               return ret;
+       }
+
+       if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
+               return 0;
+
+       ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
+       if (ret) {
+               dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
+                                ret, min_uv, max_uv);
+               return ret;
+       }
+
+       return 0;
+}
+
+static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+       int ret;
+       unsigned int clock;
+
+       clock = (ios->clock <= 25000000) ? 25000000 : ios->clock;
+
+       ret = clk_set_rate(host->biu_clk, clock);
+       if (ret)
+               dev_warn(host->dev, "failed to set rate %uHz\n", clock);
+
+       host->bus_hz = clk_get_rate(host->biu_clk);
+}
+
+static const struct dw_mci_drv_data hi6220_data = {
+       .switch_voltage         = dw_mci_hi6220_switch_voltage,
+       .set_ios                = dw_mci_hi6220_set_ios,
+       .parse_dt               = dw_mci_hi6220_parse_dt,
+};
+
 static const struct of_device_id dw_mci_k3_match[] = {
        { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
+       { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
        {},
 };
 MODULE_DEVICE_TABLE(of, dw_mci_k3_match);