The devicetree specification recommends using generic node names.
Some Zii dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the Zii dts files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
*/
status = "disabled";
- m25p128@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p128", "jedec,spi-nor";
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- pca9554@22 {
+ io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
reg = <0x48>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
label = "nvm";
};
- at24c04@54 {
+ eeprom@54 {
compatible = "atmel,24c04";
reg = <0x54>;
label = "nameplate";
&gpio1 8 GPIO_ACTIVE_HIGH>;
num-chipselects = <2>;
- m25p128@0 {
+ flash@0 {
compatible = "m25p128", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- gpio5: pca9554@20 {
+ gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
gpio-controller;
};
- gpio6: pca9554@22 {
+ gpio6: io-expander@22 {
compatible = "nxp,pca9554";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pca9554_22>;
#size-cells = <0>;
reg = <0>;
- sfp1: at24c04@50 {
+ sfp1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
#size-cells = <0>;
reg = <1>;
- sfp2: at24c04@50 {
+ sfp2: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
#size-cells = <0>;
reg = <2>;
- sfp3: at24c04@50 {
+ sfp3: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
#size-cells = <0>;
reg = <3>;
- sfp4: at24c04@50 {
+ sfp4: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
status = "okay";
spi-num-chipselects = <2>;
- m25p128@0 {
+ flash@0 {
compatible = "m25p128", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
* P1 - WE2_CMD
* P2 - WE2_CLK
*/
- gpio5: pca9557@18 {
+ gpio5: io-expander@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
gpio-controller;
* IO0 - WE1_CLK
* IO1 - WE1_CMD
*/
- gpio7: pca9554@22 {
+ gpio7: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
};
&i2c1 {
- at24mac602@50 {
+ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
read-only;
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- gpio5: pca9554@20 {
+ gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio6: pca9554@22 {
+ gpio6: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
reg = <0x4f>;
};
- gpio7: pca9555@23 {
+ gpio7: io-expander@23 {
compatible = "nxp,pca9555";
gpio-controller;
#gpio-cells = <2>;
*/
status = "disabled";
- m25p128@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p128", "jedec,spi-nor";
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
- gpio6: pca9505@22 {
+ gpio6: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
reg = <0x48>;
};
- at24c04@50 {
+ eeprom@50 {
compatible = "atmel,24c04";
reg = <0x50>;
label = "nameplate";
};
- at24c04@52 {
+ eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};