usb: core: Bail out when port is stuck in reset loop

usb: core: Bail out when port is stuck in reset loop

Unplugging USB device may cause an incorrect warm reset loop and the
port can no longer be used:
[  143.039019] xhci_hcd 0000:00:14.0: Port change event, 2-3, id 19, portsc: 0x4202c0
[  143.039025] xhci_hcd 0000:00:14.0: handle_port_status: starting usb2 port polling.
[  143.039051] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008
[  143.039058] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x4202c0, return 0x4102c0
[  143.039092] xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x4002c0
[  143.039096] usb usb2-port3: link state change
[  143.039099] xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
[  143.039101] usb usb2-port3: do warm reset
[  143.096736] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0
[  143.096751] usb usb2-port3: not warm reset yet, waiting 50ms
[  143.131500] xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive
[  143.138260] xhci_hcd 0000:00:14.0: Port change event, 2-3, id 19, portsc: 0x2802a0
[  143.138263] xhci_hcd 0000:00:14.0: handle_port_status: starting usb2 port polling.
[  143.160756] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2802a0, return 0x3002a0
[  143.160798] usb usb2-port3: not warm reset yet, waiting 200ms

The port status is PP=1, CCS=0, PED=0, PLS=Inactive, which is Error
state per "USB3 Root Hub Port State Machine". It's reasonable to perform
warm reset several times, but if the port is still not enabled after
many attempts, consider it's gone and treat it as disconnected.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220120070518.1643873-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>