hwmon: (lm90) Reduce maximum conversion rate for G781
authorGuenter Roeck <linux@roeck-us.net>
Thu, 6 Jan 2022 19:48:52 +0000 (11:48 -0800)
committerGuenter Roeck <linux@roeck-us.net>
Wed, 12 Jan 2022 01:07:37 +0000 (17:07 -0800)
commitbe6bfb92737ad1583831efafa88a8cb9aa038dec
tree4b2f296daed31f345ec31f45233e3df93aa1323c
parent3e3a138a46906641d95599040f2470a60740c399
hwmon: (lm90) Reduce maximum conversion rate for G781

According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.

Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
drivers/hwmon/lm90.c