Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Merge tag 'pci-v6.16-changes' of git://git./linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Print the actual delay time in pci_bridge_wait_for_secondary_bus()
     instead of assuming it was 1000ms (Wilfred Mallawa)

   - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
     devices', which broke resume from system sleep on AMD platforms and
     has been fixed by other commits (Lukas Wunner)

  Resource management:

   - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
     and unnecessary (Philipp Stanner)

   - Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
     and related flags since all uses have been removed (Philipp
     Stanner)

   - Rework devres 'request' functions so they are no longer 'hybrid',
     i.e., their behavior no longer depends on whether
     pcim_enable_device or pci_enable_device() was used, and remove
     related code (Philipp Stanner)

   - Warn (not BUG()) about failure to assign optional resources (Ilpo
     Järvinen)

  Error handling:

   - Log the DPC Error Source ID only when it's actually valid (when
     ERR_FATAL or ERR_NONFATAL was received from a downstream device)
     and decode into bus/device/function (Bjorn Helgaas)

   - Determine AER log level once and save it so all related messages
     use the same level (Karolina Stolarek)

   - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
     Errors (Karolina Stolarek)

   - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
     controls on interval and burst count, to avoid flooding logs and
     RCU stall warnings (Jon Pan-Doh)

  Power management:

   - Increment PM usage counter when probing reset methods so we don't
     try to read config space of a powered-off device (Alex Williamson)

   - Set all devices to D0 during enumeration to ensure ACPI opregion is
     connected via _REG (Mario Limonciello)

  Power control:

   - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
     the filename paths. Retain old deprecated symbols for
     compatibility, except for the pwrctrl slot driver
     (PCI_PWRCTRL_SLOT) (Johan Hovold)

   - When unregistering pwrctrl, cancel outstanding rescan work before
     cleaning up data structures to avoid use-after-free issues (Brian
     Norris)

  Bandwidth control:

   - Simplify link bandwidth controller by replacing the count of Link
     Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
     flag (Ilpo Järvinen)

   - Update the Link Speed after retraining, since the Link Speed may
     have changed (Ilpo Järvinen)

  PCIe native device hotplug:

   - Ignore Presence Detect Changed caused by DPC.

     pciehp already ignores Link Down/Up events caused by DPC, but on
     slots using in-band presence detect, DPC causes a spurious Presence
     Detect Changed event (Lukas Wunner)

   - Ignore Link Down/Up caused by Secondary Bus Reset.

     On hotplug ports using in-band presence detect, the reset causes a
     Presence Detect Changed event, which mistakenly caused teardown and
     re-enumeration of the device. Drivers may need to annotate code
     that resets their device (Lukas Wunner)

  Virtualization:

   - Add an ACS quirk for Loongson Root Ports that don't advertise ACS
     but don't allow peer-to-peer transactions between Root Ports; the
     quirk allows each Root Port to be in a separate IOMMU group (Huacai
     Chen)

  Endpoint framework:

   - For fixed-size BARs, retain both the actual size and the possibly
     larger size allocated to accommodate iATU alignment requirements
     (Jerome Brunet)

   - Simplify ctrl/SPAD space allocation and avoid allocating more space
     than needed (Jerome Brunet)

   - Correct MSI-X PBA offset calculations for DesignWare and Cadence
     endpoint controllers (Niklas Cassel)

   - Align the return value (number of interrupts) encoding for
     pci_epc_get_msi()/pci_epc_ops::get_msi() and
     pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)

   - Align the nr_irqs parameter encoding for
     pci_epc_set_msi()/pci_epc_ops::set_msi() and
     pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)

  Common host controller library:

   - Convert pci-host-common to a library so platforms that don't need
     native host controller drivers don't need to include these helper
     functions (Manivannan Sadhasivam)

  Apple PCIe controller driver:

   - Extract ECAM bridge creation helper from pci_host_common_probe() to
     separate driver-specific things like MSI from PCI things (Marc
     Zyngier)

   - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
     varying capabilities (Marc Zyngier)

   - Skip ports disabled in DT when setting up ports (Janne Grunau)

   - Add t6020 compatible string (Alyssa Rosenzweig)

   - Add T602x PCIe support (Hector Martin)

   - Directly set/clear INTx mask bits because T602x dropped the
     accessors that could do this without locking (Marc Zyngier)

   - Move port PHY registers to their own reg items to accommodate
     T602x, which moves them around; retain default offsets for existing
     DTs that lack phy%d entries with the reg offsets (Hector Martin)

   - Stop polling for core refclk, which doesn't work on T602x and the
     bootloader has already done anyway (Hector Martin)

   - Use gpiod_set_value_cansleep() when asserting PERST# in probe
     because we're allowed to sleep there (Hector Martin)

  Cadence PCIe controller driver:

   - Drop a runtime PM 'put' to resolve a runtime atomic count underflow
     (Hans Zhang)

   - Make the cadence core buildable as a module (Kishon Vijay Abraham I)

   - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
     loadable drivers when they are removed (Siddharth Vadapalli)

  Freescale i.MX6 PCIe controller driver:

   - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
     (Richard Zhu)

   - Remove redundant dw_pcie_wait_for_link() from
     imx_pcie_start_link(); since the DWC core does this, imx6 only
     needs it when retraining for a faster link speed (Richard Zhu)

   - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)

   - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
     some cases, the controller can't exit 'L23 Ready' through Beacon or
     PERST# deassertion (Richard Zhu)

   - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
     controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
     GT/s, causing timeouts in L1 (Richard Zhu)

   - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)

   - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)

  Mobiveil PCIe controller driver:

   - Return bool (not int) for link-up check in
     mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
     Zhang)

  NVIDIA Tegra194 PCIe controller driver:

   - Create debugfs directory for 'aspm_state_cnt' only when
     CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
     Zhang)

  Qualcomm PCIe controller driver:

   - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
     equalization presets (Krishna Chaitanya Chundru)

   - Read Maximum Link Width from the Link Capabilities register if DT
     lacks 'num-lanes' property (Krishna Chaitanya Chundru)

   - Add Physical Layer 64 GT/s Capability ID and register offsets for
     8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
     Chundru)

   - Add generic dwc support for configuring lane equalization presets
     (Krishna Chaitanya Chundru)

   - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)

  Renesas R-Car PCIe controller driver:

   - Describe endpoint BAR 4 as being fixed size (Jerome Brunet)

   - Document how to obtain R-Car V4H (r8a779g0) controller firmware
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Reorder rockchip_pci_core_rsts because
     reset_control_bulk_deassert() deasserts in reverse order, to fix a
     link training regression (Jensen Huang)

   - Mark RK3399 as being capable of raising INTx interrupts (Niklas
     Cassel)

  Rockchip DesignWare PCIe controller driver:

   - Check only PCIE_LINKUP, not LTSSM status, to determine whether the
     link is up (Shawn Lin)

   - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
     for Root Complex and Endpoint modes (Shawn Lin)

   - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
     of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
     resets non-sticky registers (Shawn Lin)

   - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
     (Diederik de Haas)

  Synopsys DesignWare PCIe controller driver:

   - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
     more robust; this will not affect the intended link width if all
     lanes are functional (Wenbin Yao)

   - Return bool (not int) for link-up check in dw_pcie_ops.link_up()
     and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
     keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
     tegra194, uniphier, visconti (Hans Zhang)

   - Add debugfs support for exposing DWC device-specific PTM context
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Make j721e buildable as a loadable and removable module (Siddharth
     Vadapalli)

   - Fix j721e host/endpoint dependencies that result in link failures
     in some configs (Arnd Bergmann)

  Device tree bindings:

   - Add qcom DT binding for 'global' interrupt (PCIe controller and
     link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
     sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
     Sadhasivam)

   - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
     ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)

   - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)

   - Correct indentation and style of examples in brcm,stb-pcie,
     cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
     microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
     (Krzysztof Kozlowski)

   - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
     armada8k from text to schema DT bindings (Rob Herring)

   - Remove obsolete .txt DT bindings for content that has been moved to
     schemas (Rob Herring)

   - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
     and IPQ9574 (Varadarajan Narayanan)

   - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)

   - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
     PolarFire may be configured that way (Conor Dooley)

  Miscellaneous:

   - Drop 'pci' suffix from intel_mid_pci.c filename to match similar
     files (Andy Shevchenko)

   - All platforms with PCI have an MMU, so add PCI Kconfig dependency
     on MMU to simplify build testing and avoid inadvertent build
     regressions (Arnd Bergmann)

   - Update Krzysztof Wilczyński's email address in MAINTAINERS
     (Krzysztof Wilczyński)

   - Update Manivannan Sadhasivam's email address in MAINTAINERS
     (Manivannan Sadhasivam)"

* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
  MAINTAINERS: Update Manivannan Sadhasivam email address
  PCI: j721e: Fix host/endpoint dependencies
  PCI: j721e: Add support to build as a loadable module
  PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
  PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
  PCI: cadence: Add support to build pcie-cadence library as a kernel module
  MAINTAINERS: Update Krzysztof Wilczyński email address
  PCI: Remove unnecessary linesplit in __pci_setup_bridge()
  PCI: WARN (not BUG()) when we fail to assign optional resources
  PCI: Remove unused pci_printk()
  PCI: qcom: Replace PERST# sleep time with proper macro
  PCI: dw-rockchip: Replace PERST# sleep time with proper macro
  PCI: host-common: Convert to library for host controller drivers
  PCI/ERR: Remove misleading TODO regarding kernel panic
  PCI: cadence: Remove duplicate message code definitions
  PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
  PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
  PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
  PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
  PCI: cadence-ep: Correct PBA offset in .set_msix() callback
  ...