X-Git-Url: https://git.kernel.dk/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fintel%2Fiwlwifi%2Fpcie%2Ftrans.c;h=58591ca051fd3c23f410d8d369f2c1a3a3150816;hb=b633353115e352d3c31c12d4c61978c810f05ea1;hp=b796952da644ca0a32ad4bf1cf5851b984fdcf88;hpb=b1d95ae5c5bd3deba84d00c4f83d7d0836b5936f;p=linux-2.6-block.git diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index b796952da644..58591ca051fd 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -1022,82 +1022,6 @@ static int iwl_pcie_load_given_ucode_8000(struct iwl_trans *trans, &first_ucode_section); } -static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, - const struct fw_img *fw, bool run_in_rfkill) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - bool hw_rfkill; - int ret; - - mutex_lock(&trans_pcie->mutex); - - /* Someone called stop_device, don't try to start_fw */ - if (trans_pcie->is_down) { - IWL_WARN(trans, - "Can't start_fw since the HW hasn't been started\n"); - ret = EIO; - goto out; - } - - /* This may fail if AMT took ownership of the device */ - if (iwl_pcie_prepare_card_hw(trans)) { - IWL_WARN(trans, "Exit HW not ready\n"); - ret = -EIO; - goto out; - } - - iwl_enable_rfkill_int(trans); - - /* If platform's RF_KILL switch is NOT set to KILL */ - hw_rfkill = iwl_is_rfkill_set(trans); - if (hw_rfkill) - set_bit(STATUS_RFKILL, &trans->status); - else - clear_bit(STATUS_RFKILL, &trans->status); - iwl_trans_pcie_rf_kill(trans, hw_rfkill); - if (hw_rfkill && !run_in_rfkill) { - ret = -ERFKILL; - goto out; - } - - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - - ret = iwl_pcie_nic_init(trans); - if (ret) { - IWL_ERR(trans, "Unable to init nic\n"); - goto out; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - iwl_enable_interrupts(trans); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Load the given image to the HW */ - if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) - ret = iwl_pcie_load_given_ucode_8000(trans, fw); - else - ret = iwl_pcie_load_given_ucode(trans, fw); - -out: - mutex_unlock(&trans_pcie->mutex); - return ret; -} - -static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) -{ - iwl_pcie_reset_ict(trans); - iwl_pcie_tx_start(trans, scd_addr); -} - static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); @@ -1128,7 +1052,8 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) * already dead. */ if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) { - IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n"); + IWL_DEBUG_INFO(trans, + "DEVICE_ENABLED bit was set and is now cleared\n"); iwl_pcie_tx_stop(trans); iwl_pcie_rx_stop(trans); @@ -1162,7 +1087,6 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) iwl_disable_interrupts(trans); spin_unlock(&trans_pcie->irq_lock); - /* clear all status bits */ clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); clear_bit(STATUS_INT_ENABLED, &trans->status); @@ -1195,10 +1119,116 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) if (hw_rfkill != was_hw_rfkill) iwl_trans_pcie_rf_kill(trans, hw_rfkill); - /* re-take ownership to prevent other users from stealing the deivce */ + /* re-take ownership to prevent other users from stealing the device */ iwl_pcie_prepare_card_hw(trans); } +static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, + const struct fw_img *fw, bool run_in_rfkill) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + bool hw_rfkill; + int ret; + + /* This may fail if AMT took ownership of the device */ + if (iwl_pcie_prepare_card_hw(trans)) { + IWL_WARN(trans, "Exit HW not ready\n"); + ret = -EIO; + goto out; + } + + iwl_enable_rfkill_int(trans); + + iwl_write32(trans, CSR_INT, 0xFFFFFFFF); + + /* + * We enabled the RF-Kill interrupt and the handler may very + * well be running. Disable the interrupts to make sure no other + * interrupt can be fired. + */ + iwl_disable_interrupts(trans); + + /* Make sure it finished running */ + synchronize_irq(trans_pcie->pci_dev->irq); + + mutex_lock(&trans_pcie->mutex); + + /* If platform's RF_KILL switch is NOT set to KILL */ + hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans->status); + else + clear_bit(STATUS_RFKILL, &trans->status); + iwl_trans_pcie_rf_kill(trans, hw_rfkill); + if (hw_rfkill && !run_in_rfkill) { + ret = -ERFKILL; + goto out; + } + + /* Someone called stop_device, don't try to start_fw */ + if (trans_pcie->is_down) { + IWL_WARN(trans, + "Can't start_fw since the HW hasn't been started\n"); + ret = -EIO; + goto out; + } + + /* make sure rfkill handshake bits are cleared */ + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + /* clear (again), then enable host interrupts */ + iwl_write32(trans, CSR_INT, 0xFFFFFFFF); + + ret = iwl_pcie_nic_init(trans); + if (ret) { + IWL_ERR(trans, "Unable to init nic\n"); + goto out; + } + + /* + * Now, we load the firmware and don't want to be interrupted, even + * by the RF-Kill interrupt (hence mask all the interrupt besides the + * FH_TX interrupt which is needed to load the firmware). If the + * RF-Kill switch is toggled, we will find out after having loaded + * the firmware and return the proper value to the caller. + */ + iwl_enable_fw_load_int(trans); + + /* really make sure rfkill handshake bits are cleared */ + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* Load the given image to the HW */ + if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) + ret = iwl_pcie_load_given_ucode_8000(trans, fw); + else + ret = iwl_pcie_load_given_ucode(trans, fw); + iwl_enable_interrupts(trans); + + /* re-check RF-Kill state since we may have missed the interrupt */ + hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans->status); + else + clear_bit(STATUS_RFKILL, &trans->status); + + iwl_trans_pcie_rf_kill(trans, hw_rfkill); + if (hw_rfkill && !run_in_rfkill) + ret = -ERFKILL; + +out: + mutex_unlock(&trans_pcie->mutex); + return ret; +} + +static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) +{ + iwl_pcie_reset_ict(trans); + iwl_pcie_tx_start(trans, scd_addr); +} + static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);