X-Git-Url: https://git.kernel.dk/?a=blobdiff_plain;f=HOWTO;h=b8a7dd74bae68d207466c6a672da818f5238215a;hb=a086c25771b195d04651d293f299f0a63f7d2a23;hp=4298f3245daed2b850cc0bcf3077fad48f8404e5;hpb=e3cedca76d9fc104eb4f6f869606fb5bf4c0d59c;p=fio.git diff --git a/HOWTO b/HOWTO index 4298f324..b8a7dd74 100644 --- a/HOWTO +++ b/HOWTO @@ -237,14 +237,15 @@ filename=str Fio normally makes up a filename based on the job name, thread number, and file number. If you want to share files between threads in a job or several jobs, specify a filename for each of them to override the default. If - the ioengine used is 'net', the filename is the host and - port to connect to in the format of =host/port. If the - ioengine is file based, you can specify a number of files - by separating the names with a ':' colon. So if you wanted - a job to open /dev/sda and /dev/sdb as the two working files, - you would use filename=/dev/sda:/dev/sdb. '-' is a reserved - name, meaning stdin or stdout. Which of the two depends - on the read/write direction set. + the ioengine used is 'net', the filename is the host, port, + and protocol to use in the format of =host/port/protocol. + See ioengine=net for more. If the ioengine is file based, you + can specify a number of files by separating the names with a + ':' colon. So if you wanted a job to open /dev/sda and /dev/sdb + as the two working files, you would use + filename=/dev/sda:/dev/sdb. '-' is a reserved name, meaning + stdin or stdout. Which of the two depends on the read/write + direction set. opendir=str Tell fio to recursively add any file it can find in this directory and down the file system tree. @@ -386,6 +387,10 @@ file_service_type=str Defines how fio decides which file from a job to roundrobin Round robin over open files. This is the default. + sequential Finish one file before moving on to + the next. Multiple files can still be + open depending on 'openfiles'. + The string can have a number appended, indicating how often to switch to a new file. So if option random:4 is given, fio will switch to a new random file after 4 ios @@ -401,7 +406,9 @@ ioengine=str Defines how the job issues io to the file. The following vsync Basic readv(2) or writev(2) IO. - libaio Linux native asynchronous io. + libaio Linux native asynchronous io. Note that Linux + may only support queued behaviour with + non-buffered IO (set direct=1 or buffered=0). posixaio glibc posix asynchronous io. @@ -429,9 +436,12 @@ ioengine=str Defines how the job issues io to the file. The following net Transfer over the network to given host:port. 'filename' must be set appropriately to - filename=host/port regardless of send + filename=host/port/protocol regardless of send or receive, if the latter only the port - argument is used. + argument is used. 'host' may be an IP address + or hostname, port is the port number to be used, + and protocol may be 'udp' or 'tcp'. If no + protocol is given, TCP is used. netsplice Like net, but uses splice/vmsplice to map data and send/receive. @@ -526,9 +536,9 @@ norandommap Normally fio will cover every block of the file when doing new random offset without looking at past io history. This means that some blocks may not be read or written, and that some blocks may be read/written more than once. This option - is mutually exclusive with verify= for that reason, since - fio doesn't track potential block rewrites which may alter - the calculated checksum for that block. + is mutually exclusive with verify= if and only if multiple + blocksizes (via bsrange=) are used, since fio only tracks + complete rewrites of blocks. softrandommap See norandommap. If fio runs with the random block map enabled and it fails to allocate the map, if this option is set it @@ -583,11 +593,16 @@ cpumask=int Set the CPU affinity of this job. The parameter given is a the allowed CPUs to be 1 and 5, you would pass the decimal value of (1 << 1 | 1 << 5), or 34. See man sched_setaffinity(2). This may not work on all supported - operating systems or kernel versions. + operating systems or kernel versions. This option doesn't + work well for a higher CPU count than what you can store in + an integer mask, so it can only control cpus 1-32. For + boxes with larger CPU counts, use cpus_allowed. cpus_allowed=str Controls the same options as cpumask, but it allows a text setting of the permitted CPUs instead. So to use CPUs 1 and - 5, you would specify cpus_allowed=1,5. + 5, you would specify cpus_allowed=1,5. This options also + allows a range of CPUs. Say you wanted a binding to CPUs + 1, 5, and 8-15, you would set cpus_allowed=1,5,8-15. startdelay=time Start this job the specified number of seconds after fio has started. Only useful if the job file contains several @@ -864,6 +879,18 @@ gtod_reduce=bool Enable all of the gettimeofday() reducing options we only do about 0.4% of the gtod() calls we would have done if all time keeping was enabled. +gtod_cpu=int Sometimes it's cheaper to dedicate a single thread of + execution to just getting the current time. Fio (and + databases, for instance) are very intensive on gettimeofday() + calls. With this option, you can set one CPU aside for + doing nothing but logging current time to a shared memory + location. Then the other threads/processes that run IO + workloads need only copy that segment, instead of entering + the kernel with a gettimeofday() call. The CPU set aside + for doing these time calls will be excluded from other + uses. Fio will manually clear it from the CPU mask of other + jobs. + 6.0 Interpreting the output ---------------------------