X-Git-Url: https://git.kernel.dk/?a=blobdiff_plain;ds=sidebyside;f=fio.1;h=a77c71c3f3adaf9a306e0ac12ac2ce46ffcba058;hb=1ad01bd10933858347d4837eaea520efc4e60c2f;hp=b746da1fa569b49843a1372dc9072cc64013fc83;hpb=e28ee21dbc2be7cec02e68c6318def0b6798d797;p=fio.git

diff --git a/fio.1 b/fio.1
index b746da1f..a77c71c3 100644
--- a/fio.1
+++ b/fio.1
@@ -21,7 +21,7 @@ list all available tracing options.
 Write output to \fIfilename\fR.
 .TP
 .BI \-\-output-format \fR=\fPformat
-Set the reporting format to \fInormal\fR, \fIterse\fR, or \fIjosn\fR.
+Set the reporting format to \fInormal\fR, \fIterse\fR, or \fIjson\fR.
 .TP
 .BI \-\-runtime \fR=\fPruntime
 Limit run time to \fIruntime\fR seconds.
@@ -286,6 +286,10 @@ Mixed sequential reads and writes.
 .TP
 .B randrw 
 Mixed random reads and writes.
+.TP
+.B trimwrite
+Trim and write mixed workload. Blocks will be trimmed first, then the same
+blocks will be written to.
 .RE
 .P
 For mixed I/O, the default split is 50/50. For certain types of io the result
@@ -378,6 +382,11 @@ because ZFS doesn't support it. Default: 'posix'.
 Use \fBposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
 are likely to be issued. Default: true.
 .TP
+.BI fadvise_stream \fR=\fPint
+Use \fBposix_fadvise\fR\|(2) to advise the kernel what stream ID the
+writes issued belong to. Only supported on Linux. Note, this option
+may change going forward.
+.TP
 .BI size \fR=\fPint
 Total size of I/O for this job.  \fBfio\fR will run until this many bytes have
 been transferred, unless limited by other options (\fBruntime\fR, for instance,
@@ -462,8 +471,6 @@ blocksize setting.
 .TP
 .B zero_buffers
 Initialize buffers with all zeros. Default: fill buffers with random data.
-The resulting IO buffers will not be completely zeroed, unless
-\fPscramble_buffers\fR is also turned off.
 .TP
 .B refill_buffers
 If this option is given, fio will refill the IO buffers on every submit. The
@@ -652,6 +659,13 @@ file out of those files based on the offset generated by fio backend. (see the
 example job file to create such files, use rw=write option). Please note, you
 might want to set necessary environment variables to work with hdfs/libhdfs
 properly.
+.TP
+.B mtd
+Read, write and erase an MTD character device (e.g., /dev/mtd0). Discards are
+treated as erases. Depending on the underlying device type, the I/O may have
+to go in a certain pattern, e.g., on NAND, writing sequentially to erase blocks
+and discarding before overwriting. The writetrim mode works well for this
+constraint.
 .RE
 .P
 .RE
@@ -680,6 +694,17 @@ cost of more retrieval system calls.
 Low watermark indicating when to start filling the queue again.  Default:
 \fBiodepth\fR. 
 .TP
+.BI io_submit_mode \fR=\fPstr
+This option controls how fio submits the IO to the IO engine. The default is
+\fBinline\fR, which means that the fio job threads submit and reap IO directly.
+If set to \fBoffload\fR, the job threads will offload IO submission to a
+dedicated pool of IO threads. This requires some coordination and thus has a
+bit of extra overhead, especially for lower queue depth IO where it can
+increase latencies. The benefit is that fio can manage submission rates
+independently of the device completion rates. This avoids skewed latency
+reporting if IO gets back up on the device side (the coordinated omission
+problem).
+.TP
 .BI direct \fR=\fPbool
 If true, use non-buffered I/O (usually O_DIRECT).  Default: false.
 .TP
@@ -1289,6 +1314,11 @@ a compressed format. They can be decompressed with fio, using the
 \fB\-\-inflate-log\fR command line parameter. The files will be stored with a
 \fB\.fz\fR suffix.
 .TP
+.BI block_error_percentiles \fR=\fPbool
+If set, record errors in trim block-sized units from writes and trims and output
+a histogram of how many trims it took to get to errors, and what kind of error
+was encountered.
+.TP
 .BI disable_lat \fR=\fPbool
 Disable measurements of total latency numbers. Useful only for cutting
 back the number of calls to \fBgettimeofday\fR\|(2), as that does impact performance at
@@ -1447,9 +1477,9 @@ exceeded before retrying operations
 Enable the reporting of percentiles of completion latencies.
 .TP
 .BI percentile_list \fR=\fPfloat_list
-Overwrite the default list of percentiles for completion
-latencies. Each number is a floating number in the range (0,100], and
-the maximum length of the list is 20. Use ':' to separate the
+Overwrite the default list of percentiles for completion latencies and the
+block error histogram. Each number is a floating number in the range (0,100],
+and the maximum length of the list is 20. Use ':' to separate the
 numbers. For example, \-\-percentile_list=99.5:99.9 will cause fio to
 report the values of completion latency below which 99.5% and 99.9% of
 the observed latencies fell, respectively.
@@ -1564,6 +1594,9 @@ Specifies the name of the Ceph pool containing the RBD.
 .TP
 .BI (rbd)clientname \fR=\fPstr
 Specifies the username (without the 'client.' prefix) used to access the Ceph cluster.
+.TP
+.BI (mtd)skipbad \fR=\fPbool
+Skip operations against known bad blocks.
 .SH OUTPUT
 While running, \fBfio\fR will display the status of the created jobs.  For
 example: