static const char iolog_ver2[] = "fio version 2 iolog";
-#ifdef CONFIG_ZLIB
-
-struct iolog_compress {
- struct flist_head list;
- void *buf;
- size_t len;
- unsigned int seq;
- int nofree;
-};
-
-#define GZ_CHUNK 131072
-
-static struct iolog_compress *get_new_chunk(unsigned int seq)
-{
- struct iolog_compress *c;
-
- c = malloc(sizeof(*c));
- INIT_FLIST_HEAD(&c->list);
- c->buf = malloc(GZ_CHUNK);
- c->len = 0;
- c->seq = seq;
- c->nofree = 0;
- return c;
-}
-
-static void free_chunk(struct iolog_compress *ic)
-{
- if (!ic->nofree) {
- free(ic->buf);
- free(ic);
- }
-}
-
-#endif
-
void queue_io_piece(struct thread_data *td, struct io_piece *ipo)
{
flist_add_tail(&ipo->list, &td->io_log_list);
td->total_io_size += ipo->len;
}
-void log_io_u(struct thread_data *td, struct io_u *io_u)
+void log_io_u(const struct thread_data *td, const struct io_u *io_u)
{
- const char *act[] = { "read", "write", "sync", "datasync",
- "sync_file_range", "wait", "trim" };
-
- assert(io_u->ddir <= 6);
-
if (!td->o.write_iolog_file)
return;
fprintf(td->iolog_f, "%s %s %llu %lu\n", io_u->file->file_name,
- act[io_u->ddir], io_u->offset,
- io_u->buflen);
+ io_ddir_name(io_u->ddir),
+ io_u->offset, io_u->buflen);
}
void log_file(struct thread_data *td, struct fio_file *f,
delay -= usec;
- /*
- * less than 100 usec delay, just regard it as noise
- */
- if (delay < 100)
- return;
-
while (delay && !td->terminate) {
this_delay = delay;
if (this_delay > 500000)
td_io_close_file(td, f);
break;
case FIO_LOG_UNLINK_FILE:
- unlink(f->file_name);
+ td_io_unlink_file(td, f);
break;
default:
log_err("fio: bad file action %d\n", ipo->file_action);
while (!flist_empty(&td->io_log_list)) {
int ret;
- ipo = flist_entry(td->io_log_list.next, struct io_piece, list);
+ ipo = flist_first_entry(&td->io_log_list, struct io_piece, list);
flist_del(&ipo->list);
remove_trim_entry(td, ipo);
}
while (!flist_empty(&td->io_hist_list)) {
- ipo = flist_entry(td->io_hist_list.next, struct io_piece, list);
+ ipo = flist_entry(&td->io_hist_list, struct io_piece, list);
flist_del(&ipo->list);
remove_trim_entry(td, ipo);
td->io_hist_len--;
td->io_hist_len--;
}
-void trim_io_piece(struct thread_data *td, struct io_u *io_u)
+void trim_io_piece(struct thread_data *td, const struct io_u *io_u)
{
struct io_piece *ipo = io_u->ipo;
void setup_log(struct io_log **log, struct log_params *p,
const char *filename)
{
- struct io_log *l = malloc(sizeof(*l));
+ struct io_log *l;
- memset(l, 0, sizeof(*l));
+ l = calloc(1, sizeof(*l));
l->nr_samples = 0;
l->max_samples = 1024;
l->log_type = p->log_type;
l->td = p->td;
if (l->log_offset)
- l->log_ddir_mask = 0x80000000;
+ l->log_ddir_mask = LOG_OFFSET_SAMPLE_BIT;
INIT_FLIST_HEAD(&l->chunk_list);
return;
s = __get_sample(samples, 0, 0);
- if (s->__ddir & 0x80000000)
- log_offset = 1;
- else
- log_offset = 0;
+ log_offset = (s->__ddir & LOG_OFFSET_SAMPLE_BIT) != 0;
nr_samples = sample_size / __log_entry_sz(log_offset);
}
#ifdef CONFIG_ZLIB
+
+struct iolog_flush_data {
+ struct tp_work work;
+ struct io_log *log;
+ void *samples;
+ uint64_t nr_samples;
+};
+
+struct iolog_compress {
+ struct flist_head list;
+ void *buf;
+ size_t len;
+ unsigned int seq;
+};
+
+#define GZ_CHUNK 131072
+
+static struct iolog_compress *get_new_chunk(unsigned int seq)
+{
+ struct iolog_compress *c;
+
+ c = malloc(sizeof(*c));
+ INIT_FLIST_HEAD(&c->list);
+ c->buf = malloc(GZ_CHUNK);
+ c->len = 0;
+ c->seq = seq;
+ return c;
+}
+
+static void free_chunk(struct iolog_compress *ic)
+{
+ free(ic->buf);
+ free(ic);
+}
+
static int z_stream_init(z_stream *stream, int gz_hdr)
{
int wbits = 15;
stream->opaque = Z_NULL;
stream->next_in = Z_NULL;
+ /*
+ * zlib magic - add 32 for auto-detection of gz header or not,
+ * if we decide to store files in a gzip friendly format.
+ */
if (gz_hdr)
wbits += 32;
return 0;
}
-struct flush_chunk_iter {
+struct inflate_chunk_iter {
unsigned int seq;
+ int err;
void *buf;
size_t buf_size;
size_t buf_used;
};
static void finish_chunk(z_stream *stream, FILE *f,
- struct flush_chunk_iter *iter)
+ struct inflate_chunk_iter *iter)
{
int ret;
iter->buf_size = iter->buf_used = 0;
}
-static int flush_chunk(struct iolog_compress *ic, int gz_hdr, FILE *f,
- z_stream *stream, struct flush_chunk_iter *iter)
+/*
+ * Iterative chunk inflation. Handles cases where we cross into a new
+ * sequence, doing flush finish of previous chunk if needed.
+ */
+static size_t inflate_chunk(struct iolog_compress *ic, int gz_hdr, FILE *f,
+ z_stream *stream, struct inflate_chunk_iter *iter)
{
+ size_t ret;
+
+ dprint(FD_COMPRESS, "inflate chunk size=%lu, seq=%u",
+ (unsigned long) ic->len, ic->seq);
+
if (ic->seq != iter->seq) {
if (iter->seq)
finish_chunk(stream, f, iter);
err = inflate(stream, Z_NO_FLUSH);
if (err < 0) {
log_err("fio: failed inflating log: %d\n", err);
+ iter->err = err;
break;
}
break;
}
- free_chunk(ic);
- return 0;
+ ret = (void *) stream->next_in - ic->buf;
+
+ dprint(FD_COMPRESS, "inflated to size=%lu\n", (unsigned long) ret);
+
+ return ret;
}
-static void flush_gz_chunks(struct io_log *log, FILE *f)
+/*
+ * Inflate stored compressed chunks, or write them directly to the log
+ * file if so instructed.
+ */
+static int inflate_gz_chunks(struct io_log *log, FILE *f)
{
- struct flush_chunk_iter iter = { .chunk_sz = log->log_gz, };
- struct flist_head *node;
+ struct inflate_chunk_iter iter = { .chunk_sz = log->log_gz, };
z_stream stream;
while (!flist_empty(&log->chunk_list)) {
struct iolog_compress *ic;
- node = log->chunk_list.next;
- ic = flist_entry(node, struct iolog_compress, list);
+ ic = flist_first_entry(&log->chunk_list, struct iolog_compress, list);
flist_del(&ic->list);
if (log->log_gz_store) {
- fwrite(ic->buf, ic->len, 1, f);
- free_chunk(ic);
+ size_t ret;
+
+ dprint(FD_COMPRESS, "log write chunk size=%lu, "
+ "seq=%u\n", (unsigned long) ic->len, ic->seq);
+
+ ret = fwrite(ic->buf, ic->len, 1, f);
+ if (ret != 1 || ferror(f)) {
+ iter.err = errno;
+ log_err("fio: error writing compressed log\n");
+ }
} else
- flush_chunk(ic, log->log_gz_store, f, &stream, &iter);
+ inflate_chunk(ic, log->log_gz_store, f, &stream, &iter);
+
+ free_chunk(ic);
}
if (iter.seq) {
finish_chunk(&stream, f, &iter);
free(iter.buf);
}
+
+ return iter.err;
}
+/*
+ * Open compressed log file and decompress the stored chunks and
+ * write them to stdout. The chunks are stored sequentially in the
+ * file, so we iterate over them and do them one-by-one.
+ */
int iolog_file_inflate(const char *file)
{
- struct flush_chunk_iter iter = { .chunk_sz = 64 * 1024 * 1024, };
+ struct inflate_chunk_iter iter = { .chunk_sz = 64 * 1024 * 1024, };
struct iolog_compress ic;
z_stream stream;
struct stat sb;
- size_t ret;
+ ssize_t ret;
+ size_t total;
+ void *buf;
FILE *f;
- if (stat(file, &sb) < 0) {
- perror("stat");
- return 1;
- }
-
f = fopen(file, "r");
if (!f) {
perror("fopen");
return 1;
}
- ic.buf = malloc(sb.st_size);
+ if (stat(file, &sb) < 0) {
+ fclose(f);
+ perror("stat");
+ return 1;
+ }
+
+ ic.buf = buf = malloc(sb.st_size);
ic.len = sb.st_size;
- ic.nofree = 1;
ic.seq = 1;
ret = fread(ic.buf, ic.len, 1, f);
fclose(f);
- flush_chunk(&ic, 1, stdout, &stream, &iter);
+ /*
+ * Each chunk will return Z_STREAM_END. We don't know how many
+ * chunks are in the file, so we just keep looping and incrementing
+ * the sequence number until we have consumed the whole compressed
+ * file.
+ */
+ total = ic.len;
+ do {
+ size_t ret;
+
+ ret = inflate_chunk(&ic, 1, stdout, &stream, &iter);
+ total -= ret;
+ if (!total)
+ break;
+ if (iter.err)
+ break;
+
+ ic.seq++;
+ ic.len -= ret;
+ ic.buf += ret;
+ } while (1);
if (iter.seq) {
finish_chunk(&stream, stdout, &iter);
free(iter.buf);
}
- free(ic.buf);
- return 0;
+ free(buf);
+ return iter.err;
}
#else
-static void flush_gz_chunks(struct io_log *log, FILE *f)
+static int inflate_gz_chunks(struct io_log *log, FILE *f)
+{
+ return 0;
+}
+
+int iolog_file_inflate(const char *file)
{
+ log_err("fio: log inflation not possible without zlib\n");
+ return 1;
}
#endif
buf = set_file_buffer(f);
- flush_gz_chunks(log, f);
+ inflate_gz_chunks(log, f);
flush_samples(f, log->log, log->nr_samples * log_entry_sz(log));
#ifdef CONFIG_ZLIB
-struct iolog_flush_data {
- struct tp_work work;
- struct io_log *log;
- void *samples;
- uint64_t nr_samples;
-};
-
+/*
+ * Invoked from our compress helper thread, when logging would have exceeded
+ * the specified memory limitation. Compresses the previously stored
+ * entries.
+ */
static int gz_work(struct tp_work *work)
{
struct iolog_flush_data *data;
stream.next_in = (void *) data->samples;
stream.avail_in = data->nr_samples * log_entry_sz(data->log);
+ dprint(FD_COMPRESS, "deflate input size=%lu, seq=%u\n",
+ (unsigned long) stream.avail_in, seq);
do {
c = get_new_chunk(seq);
stream.avail_out = GZ_CHUNK;
ret = deflate(&stream, Z_NO_FLUSH);
if (ret < 0) {
log_err("fio: deflate log (%d)\n", ret);
- break;
+ free_chunk(c);
+ goto err;
}
c->len = GZ_CHUNK - stream.avail_out;
stream.next_out = c->buf;
ret = deflate(&stream, Z_FINISH);
c->len = GZ_CHUNK - stream.avail_out;
+ total += c->len;
flist_add_tail(&c->list, &list);
} while (ret != Z_STREAM_END);
}
+ dprint(FD_COMPRESS, "deflated to size=%lu\n", (unsigned long) total);
+
ret = deflateEnd(&stream);
if (ret != Z_OK)
log_err("fio: deflateEnd %d\n", ret);
pthread_mutex_unlock(&data->log->chunk_lock);
}
+ ret = 0;
+done:
if (work->wait) {
work->done = 1;
pthread_cond_signal(&work->cv);
} else
free(data);
- return 0;
+ return ret;
+err:
+ while (!flist_empty(&list)) {
+ c = flist_first_entry(list.next, struct iolog_compress, list);
+ flist_del(&c->list);
+ free_chunk(c);
+ }
+ ret = 1;
+ goto done;
}
+/*
+ * Queue work item to compress the existing log entries. We copy the
+ * samples, and reset the log sample count to 0 (so the logging will
+ * continue to use the memory associated with the log). If called with
+ * wait == 1, will not return until the log compression has completed.
+ */
int iolog_flush(struct io_log *log, int wait)
{
struct tp_data *tdat = log->td->tp_data;
} else
data->work.wait = 0;
+ data->work.prio = 1;
tp_queue_work(tdat, &data->work);
if (wait) {