#ifndef __RTMP_H__
#define __RTMP_H__
-#include "link_list.h"
#include "spectrum_def.h"
-#include "aironet.h"
+#include "rtmp_dot11.h"
-//#define DBG_DIAGNOSE 1
+#undef AP_WSC_INCLUDED
+#undef STA_WSC_INCLUDED
+#undef WSC_INCLUDED
-#define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
-#define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
-#define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
-#ifdef RT2870
-////////////////////////////////////////////////////////////////////////////
-// The TX_BUFFER structure forms the transmitted USB packet to the device
-////////////////////////////////////////////////////////////////////////////
-typedef struct __TX_BUFFER{
- union {
- UCHAR WirelessPacket[TX_BUFFER_NORMSIZE];
- HEADER_802_11 NullFrame;
- PSPOLL_FRAME PsPollPacket;
- RTS_FRAME RTSFrame;
- }field;
- UCHAR Aggregation[4]; //Buffer for save Aggregation size.
-} TX_BUFFER, *PTX_BUFFER;
-
-typedef struct __HTTX_BUFFER{
- union {
- UCHAR WirelessPacket[MAX_TXBULK_SIZE];
- HEADER_802_11 NullFrame;
- PSPOLL_FRAME PsPollPacket;
- RTS_FRAME RTSFrame;
- }field;
- UCHAR Aggregation[4]; //Buffer for save Aggregation size.
-} HTTX_BUFFER, *PHTTX_BUFFER;
-
-
-// used to track driver-generated write irps
-typedef struct _TX_CONTEXT
-{
- PVOID pAd; //Initialized in MiniportInitialize
- PURB pUrb; //Initialized in MiniportInitialize
- PIRP pIrp; //used to cancel pending bulk out.
- //Initialized in MiniportInitialize
- PTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
- ULONG BulkOutSize;
- UCHAR BulkOutPipeId;
- UCHAR SelfIdx;
- BOOLEAN InUse;
- BOOLEAN bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
- BOOLEAN bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
- BOOLEAN IRPPending;
- BOOLEAN LastOne;
- BOOLEAN bAggregatible;
- UCHAR Header_802_3[LENGTH_802_3];
- UCHAR Rsv[2];
- ULONG DataOffset;
- UINT TxRate;
- dma_addr_t data_dma; // urb dma on linux
-
-} TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
-
-
-// used to track driver-generated write irps
-typedef struct _HT_TX_CONTEXT
-{
- PVOID pAd; //Initialized in MiniportInitialize
- PURB pUrb; //Initialized in MiniportInitialize
- PIRP pIrp; //used to cancel pending bulk out.
- //Initialized in MiniportInitialize
- PHTTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
- ULONG BulkOutSize; // Indicate the total bulk-out size in bytes in one bulk-transmission
- UCHAR BulkOutPipeId;
- BOOLEAN IRPPending;
- BOOLEAN LastOne;
- BOOLEAN bCurWriting;
- BOOLEAN bRingEmpty;
- BOOLEAN bCopySavePad;
- UCHAR SavedPad[8];
- UCHAR Header_802_3[LENGTH_802_3];
- ULONG CurWritePosition; // Indicate the buffer offset which packet will be inserted start from.
- ULONG CurWriteRealPos; // Indicate the buffer offset which packet now are writing to.
- ULONG NextBulkOutPosition; // Indicate the buffer start offset of a bulk-transmission
- ULONG ENextBulkOutPosition; // Indicate the buffer end offset of a bulk-transmission
- UINT TxRate;
- dma_addr_t data_dma; // urb dma on linux
-} HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
+#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
+#define WSC_INCLUDED
+#endif
-//
-// Structure to keep track of receive packets and buffers to indicate
-// receive data to the protocol.
-//
-typedef struct _RX_CONTEXT
-{
- PUCHAR TransferBuffer;
- PVOID pAd;
- PIRP pIrp;//used to cancel pending bulk in.
- PURB pUrb;
- //These 2 Boolean shouldn't both be 1 at the same time.
- ULONG BulkInOffset; // number of packets waiting for reordering .
- BOOLEAN bRxHandling; // Notify this packet is being process now.
- BOOLEAN InUse; // USB Hardware Occupied. Wait for USB HW to put packet.
- BOOLEAN Readable; // Receive Complete back. OK for driver to indicate receiving packet.
- BOOLEAN IRPPending; // TODO: To be removed
- atomic_t IrpLock;
- NDIS_SPIN_LOCK RxContextLock;
- dma_addr_t data_dma; // urb dma on linux
-} RX_CONTEXT, *PRX_CONTEXT;
-#endif // RT2870 //
+#include "rtmp_chip.h"
-//
-// NDIS Version definitions
-//
-#ifdef NDIS50_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION 5
-#define RTMP_NDIS_MINOR_VERSION 0
-#endif
-#ifdef NDIS51_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION 5
-#define RTMP_NDIS_MINOR_VERSION 1
-#endif
+typedef struct _RTMP_ADAPTER RTMP_ADAPTER;
+typedef struct _RTMP_ADAPTER *PRTMP_ADAPTER;
+
+typedef struct _RTMP_CHIP_OP_ RTMP_CHIP_OP;
+
-extern char NIC_VENDOR_DESC[];
-extern int NIC_VENDOR_DESC_LEN;
+//#define DBG 1
+
+//#define DBG_DIAGNOSE 1
+
+
+//+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function
+#define MAX_DATAMM_RETRY 3
+#define MGMT_USE_QUEUE_FLAG 0x80
+//---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function
+
+#define MAXSEQ (0xFFF)
extern unsigned char SNAP_AIRONET[];
-extern unsigned char CipherSuiteCiscoCCKM[];
-extern unsigned char CipherSuiteCiscoCCKMLen;
-extern unsigned char CipherSuiteCiscoCCKM24[];
-extern unsigned char CipherSuiteCiscoCCKM24Len;
-extern unsigned char CipherSuiteCCXTkip[];
-extern unsigned char CipherSuiteCCXTkipLen;
extern unsigned char CISCO_OUI[];
extern UCHAR BaSizeArray[4];
extern UCHAR BROADCAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR MULTICAST_ADDR[MAC_ADDR_LEN];
extern UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN];
extern ULONG BIT32[32];
extern UCHAR BIT8[8];
extern UCHAR Wpa2Ie;
extern UCHAR IbssIe;
extern UCHAR Ccx2Ie;
-#ifdef RT30xx
extern UCHAR WapiIe;
-#endif
extern UCHAR WPA_OUI[];
extern UCHAR RSN_OUI[];
-#ifdef RT30xx
extern UCHAR WAPI_OUI[];
-#endif
extern UCHAR WME_INFO_ELEM[];
extern UCHAR WME_PARM_ELEM[];
extern UCHAR Ccx2QosInfo[];
extern UCHAR PRE_N_HT_OUI[];
-#define MAXSEQ (0xFFF)
-
-struct reordering_mpdu
-{
- struct reordering_mpdu *next;
- PNDIS_PACKET pPacket; /* coverted to 802.3 frame */
- int Sequence; /* sequence number of MPDU */
- BOOLEAN bAMSDU;
-};
-struct reordering_list
-{
- struct reordering_mpdu *next;
- int qlen;
-};
-struct reordering_mpdu_pool
-{
- PVOID mem;
- NDIS_SPIN_LOCK lock;
- struct reordering_list freelist;
-};
typedef struct _RSSI_SAMPLE {
CHAR LastRssi0; // last received RSSI
if ((QueueHeader)->Head != NULL) \
{ \
pNext = (QueueHeader)->Head->Next; \
+ (QueueHeader)->Head->Next = NULL; \
(QueueHeader)->Head = pNext; \
if (pNext == NULL) \
(QueueHeader)->Tail = NULL; \
(QueueHeader)->Number++; \
}
+#define InsertTailQueueAc(pAd, pEntry, QueueHeader, QueueEntry) \
+{ \
+ ((PQUEUE_ENTRY)QueueEntry)->Next = NULL; \
+ if ((QueueHeader)->Tail) \
+ (QueueHeader)->Tail->Next = (PQUEUE_ENTRY)(QueueEntry); \
+ else \
+ (QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry); \
+ (QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry); \
+ (QueueHeader)->Number++; \
+}
+
+
+
//
// Macros for flag and ref count operations
//
#define RTMP_CLEAR_FLAGS(_M) ((_M)->Flags = 0)
#define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0)
#define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F))
-
-#ifdef RT2860
// Macro for power save flag.
#define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F))
#define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F))
#define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0)
#define RTMP_TEST_PSFLAG(_M, _F) (((_M)->PSFlags & (_F)) != 0)
#define RTMP_TEST_PSFLAGS(_M, _F) (((_M)->PSFlags & (_F)) == (_F))
-#endif
#define OPSTATUS_SET_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags |= (_F))
#define OPSTATUS_CLEAR_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F))
(_idx) = (_idx+1) % (_RingSize); \
}
-#ifdef RT30xx
-// We will have a cost down version which mac version is 0x3090xxxx
-#define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
-#endif
-#define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
-#ifdef RT30xx
-#define IS_RT3071(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
-#define IS_RT2070(_pAd) (((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
-
-#define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
-#endif
-
-#define RING_PACKET_INIT(_TxRing, _idx) \
-{ \
- _TxRing->Cell[_idx].pNdisPacket = NULL; \
- _TxRing->Cell[_idx].pNextNdisPacket = NULL; \
-}
-
-#define TXDT_INIT(_TxD) \
-{ \
- NdisZeroMemory(_TxD, TXD_SIZE); \
- _TxD->DMADONE = 1; \
-}
-
-//Set last data segment
-#define RING_SET_LASTDS(_TxD, _IsSD0) \
-{ \
- if (_IsSD0) {_TxD->LastSec0 = 1;} \
- else {_TxD->LastSec1 = 1;} \
-}
-
-// Increase TxTsc value for next transmission
-// TODO:
-// When i==6, means TSC has done one full cycle, do re-keying stuff follow specs
-// Should send a special event microsoft defined to request re-key
-#define INC_TX_TSC(_tsc) \
-{ \
- int i=0; \
- while (++_tsc[i] == 0x0) \
- { \
- i++; \
- if (i == 6) \
- break; \
- } \
-}
// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here.
#define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
// ULONG Value)
//
-//
-// BBP & RF are using indirect access. Before write any value into it.
-// We have to make sure there is no outstanding command pending via checking busy bit.
-//
-#define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register
-//
-#ifdef RT2860
-#define RTMP_RF_IO_WRITE32(_A, _V) \
-{ \
- PHY_CSR4_STRUC Value; \
- ULONG BusyCnt = 0; \
- if ((_A)->bPCIclkOff) \
- { \
- return; \
- } \
- do { \
- RTMP_IO_READ32(_A, RF_CSR_CFG0, &Value.word); \
- if (Value.field.Busy == IDLE) \
- break; \
- BusyCnt++; \
- } while (BusyCnt < MAX_BUSY_COUNT); \
- if (BusyCnt < MAX_BUSY_COUNT) \
- { \
- RTMP_IO_WRITE32(_A, RF_CSR_CFG0, _V); \
- } \
-}
-
-#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
-{ \
- BBP_CSR_CFG_STRUC BbpCsr; \
- int i, k; \
- for (i=0; i<MAX_BUSY_COUNT; i++) \
- { \
- RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
- if (BbpCsr.field.Busy == BUSY) \
- { \
- continue; \
- } \
- BbpCsr.word = 0; \
- BbpCsr.field.fRead = 1; \
- BbpCsr.field.BBP_RW_MODE = 1; \
- BbpCsr.field.Busy = 1; \
- BbpCsr.field.RegNum = _I; \
- RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word); \
- for (k=0; k<MAX_BUSY_COUNT; k++) \
- { \
- RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
- if (BbpCsr.field.Busy == IDLE) \
- break; \
- } \
- if ((BbpCsr.field.Busy == IDLE) && \
- (BbpCsr.field.RegNum == _I)) \
- { \
- *(_pV) = (UCHAR)BbpCsr.field.Value; \
- break; \
- } \
- } \
- if (BbpCsr.field.Busy == BUSY) \
- { \
- DBGPRINT_ERR(("DFS BBP read R%d fail\n", _I)); \
- *(_pV) = (_A)->BbpWriteLatch[_I]; \
- } \
-}
-
-//#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) {}
-// Read BBP register by register's ID. Generate PER to test BA
-#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
-{ \
- BBP_CSR_CFG_STRUC BbpCsr; \
- int i, k; \
- if ((_A)->bPCIclkOff == FALSE) \
- { \
- for (i=0; i<MAX_BUSY_COUNT; i++) \
- { \
- RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word); \
- if (BbpCsr.field.Busy == BUSY) \
- { \
- continue; \
- } \
- BbpCsr.word = 0; \
- BbpCsr.field.fRead = 1; \
- BbpCsr.field.BBP_RW_MODE = 1; \
- BbpCsr.field.Busy = 1; \
- BbpCsr.field.RegNum = _I; \
- RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word); \
- AsicSendCommandToMcu(_A, 0x80, 0xff, 0x0, 0x0); \
- RTMPusecDelay(1000); \
- for (k=0; k<MAX_BUSY_COUNT; k++) \
- { \
- RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word); \
- if (BbpCsr.field.Busy == IDLE) \
- break; \
- } \
- if ((BbpCsr.field.Busy == IDLE) && \
- (BbpCsr.field.RegNum == _I)) \
- { \
- *(_pV) = (UCHAR)BbpCsr.field.Value; \
- break; \
- } \
- } \
- if (BbpCsr.field.Busy == BUSY) \
- { \
- DBGPRINT_ERR(("BBP read R%d=0x%x fail\n", _I, BbpCsr.word)); \
- *(_pV) = (_A)->BbpWriteLatch[_I]; \
- RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word); \
- BbpCsr.field.Busy = 0; \
- RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word); \
- } \
- } \
-}
-
-#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) \
-{ \
- BBP_CSR_CFG_STRUC BbpCsr; \
- int BusyCnt; \
- for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++) \
- { \
- RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
- if (BbpCsr.field.Busy == BUSY) \
- continue; \
- BbpCsr.word = 0; \
- BbpCsr.field.fRead = 0; \
- BbpCsr.field.BBP_RW_MODE = 1; \
- BbpCsr.field.Busy = 1; \
- BbpCsr.field.Value = _V; \
- BbpCsr.field.RegNum = _I; \
- RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word); \
- (_A)->BbpWriteLatch[_I] = _V; \
- break; \
- } \
- if (BusyCnt == MAX_BUSY_COUNT) \
- { \
- DBGPRINT_ERR(("BBP write R%d fail\n", _I)); \
- } \
-}
-
-// Write BBP register by register's ID & value
-#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) \
-{ \
- BBP_CSR_CFG_STRUC BbpCsr; \
- int BusyCnt; \
- if ((_A)->bPCIclkOff == FALSE) \
- { \
- for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++) \
- { \
- RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word); \
- if (BbpCsr.field.Busy == BUSY) \
- continue; \
- BbpCsr.word = 0; \
- BbpCsr.field.fRead = 0; \
- BbpCsr.field.BBP_RW_MODE = 1; \
- BbpCsr.field.Busy = 1; \
- BbpCsr.field.Value = _V; \
- BbpCsr.field.RegNum = _I; \
- RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word); \
- AsicSendCommandToMcu(_A, 0x80, 0xff, 0x0, 0x0); \
- if (_A->OpMode == OPMODE_AP) \
- RTMPusecDelay(1000); \
- (_A)->BbpWriteLatch[_I] = _V; \
- break; \
- } \
- if (BusyCnt == MAX_BUSY_COUNT) \
- { \
- DBGPRINT_ERR(("BBP write R%d=0x%x fail\n", _I, BbpCsr.word)); \
- RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word); \
- BbpCsr.field.Busy = 0; \
- RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word); \
- } \
- } \
-}
-#endif /* RT2860 */
-#ifdef RT2870
-#define RTMP_RF_IO_WRITE32(_A, _V) RTUSBWriteRFRegister(_A, _V)
-#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
-#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
-
-#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
-#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
-#endif // RT2870 //
-
-#ifdef RT30xx
-#define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) RT30xxReadRFRegister(_A, _I, _pV)
-#define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) RT30xxWriteRFRegister(_A, _I, _V)
-#endif // RT30xx //
-
-#define MAP_CHANNEL_ID_TO_KHZ(ch, khz) { \
- switch (ch) \
- { \
- case 1: khz = 2412000; break; \
- case 2: khz = 2417000; break; \
- case 3: khz = 2422000; break; \
- case 4: khz = 2427000; break; \
- case 5: khz = 2432000; break; \
- case 6: khz = 2437000; break; \
- case 7: khz = 2442000; break; \
- case 8: khz = 2447000; break; \
- case 9: khz = 2452000; break; \
- case 10: khz = 2457000; break; \
- case 11: khz = 2462000; break; \
- case 12: khz = 2467000; break; \
- case 13: khz = 2472000; break; \
- case 14: khz = 2484000; break; \
- case 36: /* UNII */ khz = 5180000; break; \
- case 40: /* UNII */ khz = 5200000; break; \
- case 44: /* UNII */ khz = 5220000; break; \
- case 48: /* UNII */ khz = 5240000; break; \
- case 52: /* UNII */ khz = 5260000; break; \
- case 56: /* UNII */ khz = 5280000; break; \
- case 60: /* UNII */ khz = 5300000; break; \
- case 64: /* UNII */ khz = 5320000; break; \
- case 149: /* UNII */ khz = 5745000; break; \
- case 153: /* UNII */ khz = 5765000; break; \
- case 157: /* UNII */ khz = 5785000; break; \
- case 161: /* UNII */ khz = 5805000; break; \
- case 165: /* UNII */ khz = 5825000; break; \
- case 100: /* HiperLAN2 */ khz = 5500000; break; \
- case 104: /* HiperLAN2 */ khz = 5520000; break; \
- case 108: /* HiperLAN2 */ khz = 5540000; break; \
- case 112: /* HiperLAN2 */ khz = 5560000; break; \
- case 116: /* HiperLAN2 */ khz = 5580000; break; \
- case 120: /* HiperLAN2 */ khz = 5600000; break; \
- case 124: /* HiperLAN2 */ khz = 5620000; break; \
- case 128: /* HiperLAN2 */ khz = 5640000; break; \
- case 132: /* HiperLAN2 */ khz = 5660000; break; \
- case 136: /* HiperLAN2 */ khz = 5680000; break; \
- case 140: /* HiperLAN2 */ khz = 5700000; break; \
- case 34: /* Japan MMAC */ khz = 5170000; break; \
- case 38: /* Japan MMAC */ khz = 5190000; break; \
- case 42: /* Japan MMAC */ khz = 5210000; break; \
- case 46: /* Japan MMAC */ khz = 5230000; break; \
- case 184: /* Japan */ khz = 4920000; break; \
- case 188: /* Japan */ khz = 4940000; break; \
- case 192: /* Japan */ khz = 4960000; break; \
- case 196: /* Japan */ khz = 4980000; break; \
- case 208: /* Japan, means J08 */ khz = 5040000; break; \
- case 212: /* Japan, means J12 */ khz = 5060000; break; \
- case 216: /* Japan, means J16 */ khz = 5080000; break; \
- default: khz = 2412000; break; \
- } \
- }
-
-#define MAP_KHZ_TO_CHANNEL_ID(khz, ch) { \
- switch (khz) \
- { \
- case 2412000: ch = 1; break; \
- case 2417000: ch = 2; break; \
- case 2422000: ch = 3; break; \
- case 2427000: ch = 4; break; \
- case 2432000: ch = 5; break; \
- case 2437000: ch = 6; break; \
- case 2442000: ch = 7; break; \
- case 2447000: ch = 8; break; \
- case 2452000: ch = 9; break; \
- case 2457000: ch = 10; break; \
- case 2462000: ch = 11; break; \
- case 2467000: ch = 12; break; \
- case 2472000: ch = 13; break; \
- case 2484000: ch = 14; break; \
- case 5180000: ch = 36; /* UNII */ break; \
- case 5200000: ch = 40; /* UNII */ break; \
- case 5220000: ch = 44; /* UNII */ break; \
- case 5240000: ch = 48; /* UNII */ break; \
- case 5260000: ch = 52; /* UNII */ break; \
- case 5280000: ch = 56; /* UNII */ break; \
- case 5300000: ch = 60; /* UNII */ break; \
- case 5320000: ch = 64; /* UNII */ break; \
- case 5745000: ch = 149; /* UNII */ break; \
- case 5765000: ch = 153; /* UNII */ break; \
- case 5785000: ch = 157; /* UNII */ break; \
- case 5805000: ch = 161; /* UNII */ break; \
- case 5825000: ch = 165; /* UNII */ break; \
- case 5500000: ch = 100; /* HiperLAN2 */ break; \
- case 5520000: ch = 104; /* HiperLAN2 */ break; \
- case 5540000: ch = 108; /* HiperLAN2 */ break; \
- case 5560000: ch = 112; /* HiperLAN2 */ break; \
- case 5580000: ch = 116; /* HiperLAN2 */ break; \
- case 5600000: ch = 120; /* HiperLAN2 */ break; \
- case 5620000: ch = 124; /* HiperLAN2 */ break; \
- case 5640000: ch = 128; /* HiperLAN2 */ break; \
- case 5660000: ch = 132; /* HiperLAN2 */ break; \
- case 5680000: ch = 136; /* HiperLAN2 */ break; \
- case 5700000: ch = 140; /* HiperLAN2 */ break; \
- case 5170000: ch = 34; /* Japan MMAC */ break; \
- case 5190000: ch = 38; /* Japan MMAC */ break; \
- case 5210000: ch = 42; /* Japan MMAC */ break; \
- case 5230000: ch = 46; /* Japan MMAC */ break; \
- case 4920000: ch = 184; /* Japan */ break; \
- case 4940000: ch = 188; /* Japan */ break; \
- case 4960000: ch = 192; /* Japan */ break; \
- case 4980000: ch = 196; /* Japan */ break; \
- case 5040000: ch = 208; /* Japan, means J08 */ break; \
- case 5060000: ch = 212; /* Japan, means J12 */ break; \
- case 5080000: ch = 216; /* Japan, means J16 */ break; \
- default: ch = 1; break; \
- } \
- }
//
// Common fragment list structure - Identical to the scatter gather frag list structure
//
+//#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT
+//#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT
#define NIC_MAX_PHYS_BUF_COUNT 8
typedef struct _RTMP_SCATTER_GATHER_ELEMENT {
} \
}
-#define SWITCH_AB( _pAA, _pBB) \
-{ \
- PVOID pCC; \
- pCC = _pBB; \
- _pBB = _pAA; \
- _pAA = pCC; \
-}
// Enqueue this frame to MLME engine
// We need to enqueue the whole frame because MLME need to pass data type
// information from 802.11 header
-#ifdef RT2860
+#ifdef RTMP_MAC_PCI
#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
{ \
UINT32 High32TSF, Low32TSF; \
RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \
MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
}
-#endif
-#ifdef RT2870
+#endif // RTMP_MAC_PCI //
+#ifdef RTMP_MAC_USB
#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
{ \
UINT32 High32TSF=0, Low32TSF=0; \
MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
}
-#endif // RT2870 //
-
-#ifdef RT30xx
-//Need to collect each ant's rssi concurrently
-//rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant
-#define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2) \
-{ \
- SHORT AvgRssi; \
- UCHAR UsedAnt; \
- if (_pAd->RxAnt.EvaluatePeriod == 0) \
- { \
- UsedAnt = _pAd->RxAnt.Pair1PrimaryRxAnt; \
- AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt]; \
- if (AvgRssi < 0) \
- AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1; \
- else \
- AvgRssi = _rssi1 << 3; \
- _pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi; \
- } \
- else \
- { \
- UsedAnt = _pAd->RxAnt.Pair1SecondaryRxAnt; \
- AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt]; \
- if ((AvgRssi < 0) && (_pAd->RxAnt.FirstPktArrivedWhenEvaluate)) \
- AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1; \
- else \
- { \
- _pAd->RxAnt.FirstPktArrivedWhenEvaluate = TRUE; \
- AvgRssi = _rssi1 << 3; \
- } \
- _pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi; \
- _pAd->RxAnt.RcvPktNumWhenEvaluate++; \
- } \
-}
-#endif // RT30xx //
-
-
-#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \
- NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
+#endif // RTMP_MAC_USB //
#define MAC_ADDR_EQUAL(pAddr1,pAddr2) RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN)
#define SSID_EQUAL(ssid1, len1, ssid2, len2) ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1)))
//
#define JapanChannelCheck(channel) ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
-#ifdef RT2860
+#define STA_EXTRA_SETTING(_pAd)
+
#define STA_PORT_SECURED(_pAd) \
{ \
- _pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
- RTMP_SET_PSFLAG(_pAd, fRTMP_PS_CAN_GO_SLEEP); \
- NdisAcquireSpinLock(&(_pAd)->MacTabLock); \
- _pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
+ BOOLEAN Cancelled; \
+ (_pAd)->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
+ NdisAcquireSpinLock(&((_pAd)->MacTabLock)); \
+ (_pAd)->MacTab.Content[BSSID_WCID].PortSecured = (_pAd)->StaCfg.PortSecured; \
+ (_pAd)->MacTab.Content[BSSID_WCID].PrivacyFilter = Ndis802_11PrivFilterAcceptAll;\
NdisReleaseSpinLock(&(_pAd)->MacTabLock); \
+ RTMPCancelTimer(&((_pAd)->Mlme.LinkDownTimer), &Cancelled);\
+ STA_EXTRA_SETTING(_pAd); \
}
-#endif
-#ifdef RT2870
-#define STA_PORT_SECURED(_pAd) \
-{ \
- _pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
- NdisAcquireSpinLock(&_pAd->MacTabLock); \
- _pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
- NdisReleaseSpinLock(&_pAd->MacTabLock); \
-}
-#endif
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct _RTMP_REG_PAIR
-{
- ULONG Register;
- ULONG Value;
-} RTMP_REG_PAIR, *PRTMP_REG_PAIR;
-
-typedef struct _REG_PAIR
-{
- UCHAR Register;
- UCHAR Value;
-} REG_PAIR, *PREG_PAIR;
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct _RTMP_RF_REGS
-{
- UCHAR Channel;
- ULONG R1;
- ULONG R2;
- ULONG R3;
- ULONG R4;
-} RTMP_RF_REGS, *PRTMP_RF_REGS;
-
-typedef struct _FREQUENCY_ITEM {
- UCHAR Channel;
- UCHAR N;
- UCHAR R;
- UCHAR K;
-} FREQUENCY_ITEM, *PFREQUENCY_ITEM;
//
// Data buffer for DMA operation, the buffer must be contiguous physical memory
} RTMP_DMABUF, *PRTMP_DMABUF;
-typedef union _HEADER_802_11_SEQ{
- struct {
- USHORT Frag:4;
- USHORT Sequence:12;
- } field;
- USHORT value;
-} HEADER_802_11_SEQ, *PHEADER_802_11_SEQ;
-
-//
-// Data buffer for DMA operation, the buffer must be contiguous physical memory
-// Both DMA to / from CPU use the same structure.
-//
-typedef struct _RTMP_REORDERBUF
-{
- BOOLEAN IsFull;
- PVOID AllocVa; // TxBuf virtual address
- UCHAR Header802_3[14];
- HEADER_802_11_SEQ Sequence; //support compressed bitmap BA, so no consider fragment in BA
- UCHAR DataOffset;
- USHORT Datasize;
- ULONG AllocSize;
-#ifdef RT2860
- NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address
-#endif
-#ifdef RT2870
- PUCHAR AllocPa;
-#endif // RT2870 //
-} RTMP_REORDERBUF, *PRTMP_REORDERBUF;
-
//
// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be
// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor
RTMP_DMABUF DmaBuf; // Associated DMA buffer structure
} RTMP_DMACB, *PRTMP_DMACB;
-typedef struct _RTMP_TX_BUF
-{
- PQUEUE_ENTRY Next;
- UCHAR Index;
- ULONG AllocSize; // Control block size
- PVOID AllocVa; // Control block virtual address
- NDIS_PHYSICAL_ADDRESS AllocPa; // Control block physical address
-} RTMP_TXBUF, *PRTMP_TXBUF;
-typedef struct _RTMP_RX_BUF
-{
- BOOLEAN InUse;
- ULONG ByBaRecIndex;
- RTMP_REORDERBUF MAP_RXBuf[MAX_RX_REORDERBUF];
-} RTMP_RXBUF, *PRTMP_RXBUF;
typedef struct _RTMP_TX_RING
{
RTMP_DMACB Cell[TX_RING_SIZE];
typedef struct _COUNTER_RALINK {
ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput
-#ifdef RT2860
- ULONG LastReceivedByteCount;
-#endif
ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput
ULONG BeenDisassociatedCount;
ULONG BadCQIAutoRecoveryCount;
ULONG OneSecRxCount;
UINT32 OneSecTxAggregationCount;
UINT32 OneSecRxAggregationCount;
-
+ UINT32 OneSecReceivedByteCount;
UINT32 OneSecFrameDuplicateCount;
-#ifdef RT2870
- ULONG OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput
-#endif // RT2870 //
-
+ UINT32 OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput
UINT32 OneSecTxNoRetryOkCount;
UINT32 OneSecTxRetryOkCount;
UINT32 OneSecTxFailCount;
LARGE_INTEGER MPDUInReceivedAMPDUCount;
} COUNTER_RALINK, *PCOUNTER_RALINK;
-typedef struct _PID_COUNTER {
- ULONG TxAckRequiredCount; // CRC error
- ULONG TxAggreCount;
- ULONG TxSuccessCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
- ULONG LastSuccessRate;
-} PID_COUNTER, *PPID_COUNTER;
typedef struct _COUNTER_DRS {
// to record the each TX rate's quality. 0 is best, the bigger the worse.
ULONG LastTxOkCount;
} COUNTER_DRS, *PCOUNTER_DRS;
-//
-// Arcfour Structure Added by PaulWu
-//
-typedef struct _ARCFOUR
-{
- UINT X;
- UINT Y;
- UCHAR STATE[256];
-} ARCFOURCONTEXT, *PARCFOURCONTEXT;
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI too. just copy to TXWI.
-typedef struct _RECEIVE_SETTING {
- USHORT NumOfRX:2; // MIMO. WE HAVE 3R
- USHORT Mode:2; //channel bandwidth 20MHz or 40 MHz
- USHORT ShortGI:1;
- USHORT STBC:2; //SPACE
- USHORT rsv:3;
- USHORT OFDM:1;
- USHORT MIMO:1;
- } RECEIVE_SETTING, *PRECEIVE_SETTING;
-
-// Shared key data structure
-typedef struct _WEP_KEY {
- UCHAR KeyLen; // Key length for each key, 0: entry is invalid
- UCHAR Key[MAX_LEN_OF_KEY]; // right now we implement 4 keys, 128 bits max
-} WEP_KEY, *PWEP_KEY;
+
+/***************************************************************************
+ * security key related data structure
+ **************************************************************************/
typedef struct _CIPHER_KEY {
UCHAR Key[16]; // right now we implement 4 keys, 128 bits max
UCHAR RxMic[8]; // make alignment
UCHAR Type; // Indicate Pairwise/Group when reporting MIC error
} CIPHER_KEY, *PCIPHER_KEY;
-typedef struct _BBP_TUNING_STRUCT {
- BOOLEAN Enable;
- UCHAR FalseCcaCountUpperBound; // 100 per sec
- UCHAR FalseCcaCountLowerBound; // 10 per sec
- UCHAR R17LowerBound; // specified in E2PROM
- UCHAR R17UpperBound; // 0x68 according to David Tung
- UCHAR CurrentR17Value;
-} BBP_TUNING, *PBBP_TUNING;
-typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
- UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status
-#ifdef RT30xx
- UCHAR EvaluateStableCnt;
-#endif
- UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2
- UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2
- UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4
- UCHAR Pair2SecondaryRxAnt; // 0:Ant-E3, 1:Ant-E4
- SHORT Pair1AvgRssi[2]; // AvgRssi[0]:E1, AvgRssi[1]:E2
- SHORT Pair2AvgRssi[2]; // AvgRssi[0]:E3, AvgRssi[1]:E4
- SHORT Pair1LastAvgRssi; //
- SHORT Pair2LastAvgRssi; //
- ULONG RcvPktNumWhenEvaluate;
- BOOLEAN FirstPktArrivedWhenEvaluate;
- RALINK_TIMER_STRUCT RxAntDiversityTimer;
-} SOFT_RX_ANT_DIVERSITY, *PSOFT_RX_ANT_DIVERSITY;
+// structure to define WPA Group Key Rekey Interval
+typedef struct PACKED _RT_802_11_WPA_REKEY {
+ ULONG ReKeyMethod; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
+ ULONG ReKeyInterval; // time-based: seconds, packet-based: kilo-packets
+} RT_WPA_REKEY,*PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
+
+#ifdef RTMP_MAC_USB
+/***************************************************************************
+ * RTUSB I/O related data structure
+ **************************************************************************/
+typedef struct _RT_SET_ASIC_WCID {
+ ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
+ ULONG SetTid; // time-based: seconds, packet-based: kilo-packets
+ ULONG DeleteTid; // time-based: seconds, packet-based: kilo-packets
+ UCHAR Addr[MAC_ADDR_LEN]; // avoid in interrupt when write key
+} RT_SET_ASIC_WCID,*PRT_SET_ASIC_WCID;
+
+typedef struct _RT_SET_ASIC_WCID_ATTRI {
+ ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
+ ULONG Cipher; // ASIC Cipher definition
+ UCHAR Addr[ETH_LENGTH_OF_ADDRESS];
+} RT_SET_ASIC_WCID_ATTRI,*PRT_SET_ASIC_WCID_ATTRI;
+
+// for USB interface, avoid in interrupt when write key
+typedef struct RT_ADD_PAIRWISE_KEY_ENTRY {
+ UCHAR MacAddr[6];
+ USHORT MacTabMatchWCID; // ASIC
+ CIPHER_KEY CipherKey;
+} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
-typedef struct _LEAP_AUTH_INFO {
- BOOLEAN Enabled; //Ture: Enable LEAP Authentication
- BOOLEAN CCKM; //Ture: Use Fast Reauthentication with CCKM
- UCHAR Reserve[2];
- UCHAR UserName[256]; //LEAP, User name
- ULONG UserNameLen;
- UCHAR Password[256]; //LEAP, User Password
- ULONG PasswordLen;
-} LEAP_AUTH_INFO, *PLEAP_AUTH_INFO;
+// Cipher suite type for mixed mode group cipher, P802.11i-2004
+typedef enum _RT_802_11_CIPHER_SUITE_TYPE {
+ Cipher_Type_NONE,
+ Cipher_Type_WEP40,
+ Cipher_Type_TKIP,
+ Cipher_Type_RSVD,
+ Cipher_Type_CCMP,
+ Cipher_Type_WEP104
+} RT_802_11_CIPHER_SUITE_TYPE, *PRT_802_11_CIPHER_SUITE_TYPE;
+#endif // RTMP_MAC_USB //
typedef struct {
UCHAR Addr[MAC_ADDR_LEN];
ROGUEAP_ENTRY RogueApEntry[MAX_LEN_OF_BSS_TABLE];
} ROGUEAP_TABLE, *PROGUEAP_TABLE;
-typedef struct {
- BOOLEAN Enable;
- UCHAR Delta;
- BOOLEAN PlusSign;
-} CCK_TX_POWER_CALIBRATE, *PCCK_TX_POWER_CALIBRATE;
-
//
-// Receive Tuple Cache Format
+// Cisco IAPP format
//
-typedef struct _TUPLE_CACHE {
- BOOLEAN Valid;
- UCHAR MacAddress[MAC_ADDR_LEN];
- USHORT Sequence;
- USHORT Frag;
-} TUPLE_CACHE, *PTUPLE_CACHE;
+typedef struct _CISCO_IAPP_CONTENT_
+{
+ USHORT Length; //IAPP Length
+ UCHAR MessageType; //IAPP type
+ UCHAR FunctionCode; //IAPP function type
+ UCHAR DestinaionMAC[MAC_ADDR_LEN];
+ UCHAR SourceMAC[MAC_ADDR_LEN];
+ USHORT Tag; //Tag(element IE) - Adjacent AP report
+ USHORT TagLength; //Length of element not including 4 byte header
+ UCHAR OUI[4]; //0x00, 0x40, 0x96, 0x00
+ UCHAR PreviousAP[MAC_ADDR_LEN]; //MAC Address of access point
+ USHORT Channel;
+ USHORT SsidLen;
+ UCHAR Ssid[MAX_LEN_OF_SSID];
+ USHORT Seconds; //Seconds that the client has been disassociated.
+} CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
-//
-// Fragment Frame structure
-//
+
+/*
+ * Fragment Frame structure
+ */
typedef struct _FRAGMENT_FRAME {
PNDIS_PACKET pFragPacket;
ULONG RxSize;
PNDIS_BUFFER pFirstBuffer; // Pointer to first buffer descriptor
} PACKET_INFO, *PPACKET_INFO;
+
+//
+// Arcfour Structure Added by PaulWu
+//
+typedef struct _ARCFOUR
+{
+ UINT X;
+ UINT Y;
+ UCHAR STATE[256];
+} ARCFOURCONTEXT, *PARCFOURCONTEXT;
+
+
//
// Tkip Key structure which RC4 key & MIC calculation
//
TKIP_KEY_INFO Rx;
} PRIVATE_STRUC, *PPRIVATE_STRUC;
+
+/***************************************************************************
+ * Channel and BBP related data structures
+ **************************************************************************/
// structure to tune BBP R66 (BBP TUNING)
typedef struct _BBP_R66_TUNING {
BOOLEAN bEnable;
USHORT RemainingTimeForUse; //unit: sec
} CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER;
+typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
+ UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status
+ UCHAR EvaluateStableCnt;
+ UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2
+ UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2
+ UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4
+ UCHAR Pair2SecondaryRxAnt; // 0:Ant-E3, 1:Ant-E4
+ SHORT Pair1AvgRssi[2]; // AvgRssi[0]:E1, AvgRssi[1]:E2
+ SHORT Pair2AvgRssi[2]; // AvgRssi[0]:E3, AvgRssi[1]:E4
+ SHORT Pair1LastAvgRssi; //
+ SHORT Pair2LastAvgRssi; //
+ ULONG RcvPktNumWhenEvaluate;
+ BOOLEAN FirstPktArrivedWhenEvaluate;
+ RALINK_TIMER_STRUCT RxAntDiversityTimer;
+} SOFT_RX_ANT_DIVERSITY, *PSOFT_RX_ANT_DIVERSITY;
+
+
+/***************************************************************************
+ * structure for radar detection and channel switch
+ **************************************************************************/
+typedef struct _RADAR_DETECT_STRUCT {
+ //BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h
+ UCHAR CSCount; //Channel switch counter
+ UCHAR CSPeriod; //Channel switch period (beacon count)
+ UCHAR RDCount; //Radar detection counter
+ UCHAR RDMode; //Radar Detection mode
+ UCHAR RDDurRegion; //Radar detection duration region
+ UCHAR BBPR16;
+ UCHAR BBPR17;
+ UCHAR BBPR18;
+ UCHAR BBPR21;
+ UCHAR BBPR22;
+ UCHAR BBPR64;
+ ULONG InServiceMonitorCount; // unit: sec
+ UINT8 DfsSessionTime;
+ BOOLEAN bFastDfs;
+ UINT8 ChMovingTime;
+ UINT8 LongPulseRadarTh;
+} RADAR_DETECT_STRUCT, *PRADAR_DETECT_STRUCT;
+
typedef enum _ABGBAND_STATE_ {
UNKNOWN_BAND,
BG_BAND,
A_BAND,
} ABGBAND_STATE;
+
+/***************************************************************************
+ * structure for MLME state machine
+ **************************************************************************/
typedef struct _MLME_STRUCT {
// STA state machines
STATE_MACHINE CntlMachine;
STATE_MACHINE SyncMachine;
STATE_MACHINE WpaPskMachine;
STATE_MACHINE LeapMachine;
- STATE_MACHINE AironetMachine;
STATE_MACHINE_FUNC AssocFunc[ASSOC_FUNC_SIZE];
STATE_MACHINE_FUNC AuthFunc[AUTH_FUNC_SIZE];
STATE_MACHINE_FUNC AuthRspFunc[AUTH_RSP_FUNC_SIZE];
STATE_MACHINE_FUNC SyncFunc[SYNC_FUNC_SIZE];
- STATE_MACHINE_FUNC WpaPskFunc[WPA_PSK_FUNC_SIZE];
- STATE_MACHINE_FUNC AironetFunc[AIRONET_FUNC_SIZE];
STATE_MACHINE_FUNC ActFunc[ACT_FUNC_SIZE];
// Action
STATE_MACHINE ActMachine;
+
+
+
+ // common WPA state machine
+ STATE_MACHINE WpaMachine;
+ STATE_MACHINE_FUNC WpaFunc[WPA_FUNC_SIZE];
+
+
+
ULONG ChannelQuality; // 0..100, Channel Quality Indication for Roaming
ULONG Now32; // latch the value of NdisGetSystemUpTime()
ULONG LastSendNULLpsmTime;
RALINK_TIMER_STRUCT APSDPeriodicTimer;
RALINK_TIMER_STRUCT LinkDownTimer;
RALINK_TIMER_STRUCT LinkUpTimer;
-#ifdef RT2860
+#ifdef RTMP_MAC_PCI
UCHAR bPsPollTimerRunning;
RALINK_TIMER_STRUCT PsPollTimer;
RALINK_TIMER_STRUCT RadioOnOffTimer;
-#endif
+#endif // RTMP_MAC_PCI //
ULONG PeriodicRound;
ULONG OneSecPeriodicRound;
BOOLEAN bEnableAutoAntennaCheck;
RALINK_TIMER_STRUCT RxAntEvalTimer;
-#ifdef RT2870
+#ifdef RT30xx
UCHAR CaliBW40RfR24;
UCHAR CaliBW20RfR24;
-#endif // RT2870 //
+#endif // RT30xx //
+
+#ifdef RTMP_MAC_USB
+ RALINK_TIMER_STRUCT AutoWakeupTimer;
+ BOOLEAN AutoWakeupTimerRunning;
+#endif // RTMP_MAC_USB //
} MLME_STRUCT, *PMLME_STRUCT;
-// structure for radar detection and channel switch
-typedef struct _RADAR_DETECT_STRUCT {
- UCHAR CSCount; //Channel switch counter
- UCHAR CSPeriod; //Channel switch period (beacon count)
- UCHAR RDCount; //Radar detection counter
- UCHAR RDMode; //Radar Detection mode
- UCHAR RDDurRegion; //Radar detection duration region
- UCHAR BBPR16;
- UCHAR BBPR17;
- UCHAR BBPR18;
- UCHAR BBPR21;
- UCHAR BBPR22;
- UCHAR BBPR64;
- ULONG InServiceMonitorCount; // unit: sec
- UINT8 DfsSessionTime;
- BOOLEAN bFastDfs;
- UINT8 ChMovingTime;
- UINT8 LongPulseRadarTh;
-} RADAR_DETECT_STRUCT, *PRADAR_DETECT_STRUCT;
+
+/***************************************************************************
+ * 802.11 N related data structures
+ **************************************************************************/
+struct reordering_mpdu
+{
+ struct reordering_mpdu *next;
+ PNDIS_PACKET pPacket; /* coverted to 802.3 frame */
+ int Sequence; /* sequence number of MPDU */
+ BOOLEAN bAMSDU;
+};
+
+struct reordering_list
+{
+ struct reordering_mpdu *next;
+ int qlen;
+};
+
+struct reordering_mpdu_pool
+{
+ PVOID mem;
+ NDIS_SPIN_LOCK lock;
+ struct reordering_list freelist;
+};
typedef enum _REC_BLOCKACK_STATUS
{
UCHAR Wcid;
UCHAR TID;
UCHAR BAWinSize; // 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU.
+ //UCHAR NumOfRxPkt;
+ //UCHAR Curindidx; // the head in the RX reordering buffer
USHORT LastIndSeq;
+// USHORT LastIndSeqAtTimer;
USHORT TimeOutValue;
RALINK_TIMER_STRUCT RECBATimer;
ULONG LastIndSeqAtTimer;
ULONG nDropPacket;
ULONG rcvSeq;
REC_BLOCKACK_STATUS REC_BA_Status;
+// UCHAR RxBufIdxUsed;
+ // corresponding virtual address for RX reordering packet storage.
+ //RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF];
NDIS_SPIN_LOCK RxReRingLock; // Rx Ring spinlock
+// struct _BA_REC_ENTRY *pNext;
PVOID pAdapter;
struct reordering_list list;
} BA_REC_ENTRY, *PBA_REC_ENTRY;
typedef struct {
ULONG numAsRecipient; // I am recipient of numAsRecipient clients. These client are in the BARecEntry[]
ULONG numAsOriginator; // I am originator of numAsOriginator clients. These clients are in the BAOriEntry[]
+ ULONG numDoneOriginator; // count Done Originator sessions
BA_ORI_ENTRY BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE];
BA_REC_ENTRY BARecEntry[MAX_LEN_OF_BA_REC_TABLE];
} BA_TABLE, *PBA_TABLE;
UINT32 word;
} BACAP_STRUC, *PBACAP_STRUC;
+
+typedef struct {
+ BOOLEAN IsRecipient;
+ UCHAR MACAddr[MAC_ADDR_LEN];
+ UCHAR TID;
+ UCHAR nMSDU;
+ USHORT TimeOut;
+ BOOLEAN bAllTid; // If True, delete all TID for BA sessions with this MACaddr.
+} OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
+
+
+
+#define IS_HT_STA(_pMacEntry) \
+ (_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
+
+#define IS_HT_RATE(_pMacEntry) \
+ (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
+
+#define PEER_IS_HT_RATE(_pMacEntry) \
+ (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
+
+
+
//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic)
typedef struct _IOT_STRUC {
UCHAR Threshold[2];
// This is the registry setting for 802.11n transmit setting. Used in advanced page.
typedef union _REG_TRANSMIT_SETTING {
struct {
+ //UINT32 PhyMode:4;
+ //UINT32 MCS:7; // MCS
UINT32 rsv0:10;
UINT32 TxBF:1;
UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz
USHORT word;
} DESIRED_TRANSMIT_SETTING, *PDESIRED_TRANSMIT_SETTING;
-typedef struct {
- BOOLEAN IsRecipient;
- UCHAR MACAddr[MAC_ADDR_LEN];
- UCHAR TID;
- UCHAR nMSDU;
- USHORT TimeOut;
- BOOLEAN bAllTid; // If True, delete all TID for BA sessions with this MACaddr.
-} OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
+#ifdef RTMP_MAC_USB
+/***************************************************************************
+ * USB-based chip Beacon related data structures
+ **************************************************************************/
+#define BEACON_BITMAP_MASK 0xff
+typedef struct _BEACON_SYNC_STRUCT_
+{
+ UCHAR BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
+ UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
+ ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
+ ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
+ BOOLEAN EnableBeacon; // trigger to enable beacon transmission.
+ UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+ UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+}BEACON_SYNC_STRUCT;
+#endif // RTMP_MAC_USB //
-//
-// Multiple SSID structure
-//
+/***************************************************************************
+ * Multiple SSID related data structures
+ **************************************************************************/
#define WLAN_MAX_NUM_OF_TIM ((MAX_LEN_OF_MAC_TABLE >> 3) + 1) /* /8 + 1 */
#define WLAN_CT_TIM_BCMC_OFFSET 0 /* unit: 32B */
UCHAR bit_offset = wcid & 0x7; \
ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
-#ifdef RT2870
-#define BEACON_BITMAP_MASK 0xff
-typedef struct _BEACON_SYNC_STRUCT_
-{
- UCHAR BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
- UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
- ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
- ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
- BOOLEAN EnableBeacon; // trigger to enable beacon transmission.
- UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
- UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-}BEACON_SYNC_STRUCT;
-#endif // RT2870 //
-
-typedef struct _MULTISSID_STRUCT {
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR SsidLen;
- CHAR Ssid[MAX_LEN_OF_SSID];
- USHORT CapabilityInfo;
-
- PNET_DEV MSSIDDev;
-
- NDIS_802_11_AUTHENTICATION_MODE AuthMode;
- NDIS_802_11_WEP_STATUS WepStatus;
- NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
- WPA_MIX_PAIR_CIPHER WpaMixPairCipher;
-
- ULONG TxCount;
- ULONG RxCount;
- ULONG ReceivedByteCount;
- ULONG TransmittedByteCount;
- ULONG RxErrorCount;
- ULONG RxDropCount;
-
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting. this is for reading registry setting only. not useful.
- BOOLEAN bAutoTxRateSwitch;
-
- UCHAR DefaultKeyId;
-
- UCHAR TxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11, ...
- UCHAR DesiredRates[MAX_LEN_OF_SUPPORTED_RATES];// OID_802_11_DESIRED_RATES
- UCHAR DesiredRatesIndex;
- UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
-
- UCHAR TimBitmaps[WLAN_MAX_NUM_OF_TIM];
-
- // WPA
- UCHAR GMK[32];
- UCHAR PMK[32];
- UCHAR GTK[32];
- BOOLEAN IEEE8021X;
- BOOLEAN PreAuth;
- UCHAR GNonce[32];
- UCHAR PortSecured;
- NDIS_802_11_PRIVACY_FILTER PrivacyFilter;
- UCHAR BANClass3Data;
- ULONG IsolateInterStaTraffic;
-
- UCHAR RSNIE_Len[2];
- UCHAR RSN_IE[2][MAX_LEN_OF_RSNIE];
-
-
- UCHAR TimIELocationInBeacon;
- UCHAR CapabilityInfoLocationInBeacon;
- // outgoing BEACON frame buffer and corresponding TXWI
- // PTXWI_STRUC BeaconTxWI; //
- CHAR BeaconBuf[MAX_BEACON_SIZE]; // NOTE: BeaconBuf should be 4-byte aligned
-
- BOOLEAN bHideSsid;
- UINT16 StationKeepAliveTime; // unit: second
-
- USHORT VLAN_VID;
- USHORT VLAN_Priority;
-
- RT_802_11_ACL AccessControlList;
-
- // EDCA Qos
- BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM
- BOOLEAN bDLSCapable; // 0:disable DLS, 1:enable DLS
-
- UCHAR DlsPTK[64]; // Due to windows dirver count on meetinghouse to handle 4-way shake
-
- // For 802.1x daemon setting per BSS
- UCHAR radius_srv_num;
- RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM];
-
-#ifdef RTL865X_SOC
- unsigned int mylinkid;
-#endif
-
-
- UINT32 RcvdConflictSsidCount;
- UINT32 RcvdSpoofedAssocRespCount;
- UINT32 RcvdSpoofedReassocRespCount;
- UINT32 RcvdSpoofedProbeRespCount;
- UINT32 RcvdSpoofedBeaconCount;
- UINT32 RcvdSpoofedDisassocCount;
- UINT32 RcvdSpoofedAuthCount;
- UINT32 RcvdSpoofedDeauthCount;
- UINT32 RcvdSpoofedUnknownMgmtCount;
- UINT32 RcvdReplayAttackCount;
-
- CHAR RssiOfRcvdConflictSsid;
- CHAR RssiOfRcvdSpoofedAssocResp;
- CHAR RssiOfRcvdSpoofedReassocResp;
- CHAR RssiOfRcvdSpoofedProbeResp;
- CHAR RssiOfRcvdSpoofedBeacon;
- CHAR RssiOfRcvdSpoofedDisassoc;
- CHAR RssiOfRcvdSpoofedAuth;
- CHAR RssiOfRcvdSpoofedDeauth;
- CHAR RssiOfRcvdSpoofedUnknownMgmt;
- CHAR RssiOfRcvdReplayAttack;
-
- BOOLEAN bBcnSntReq;
- UCHAR BcnBufIdx;
-} MULTISSID_STRUCT, *PMULTISSID_STRUCT;
// configuration common to OPMODE_AP as well as OPMODE_STA
typedef struct _COMMON_CONFIG {
UCHAR PhyMode; // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED
USHORT Dsifs; // in units of usec
ULONG PacketFilter; // Packet filter for receiving
+ UINT8 RegulatoryClass;
CHAR Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
UCHAR SsidLen; // the actual ssid length in used
BOOLEAN bAPSDAC_BK;
BOOLEAN bAPSDAC_VI;
BOOLEAN bAPSDAC_VO;
+
+ /* because TSPEC can modify the APSD flag, we need to keep the APSD flag
+ requested in association stage from the station;
+ we need to recover the APSD flag after the TSPEC is deleted. */
+ BOOLEAN bACMAPSDBackup[4]; /* for delivery-enabled & trigger-enabled both */
+ BOOLEAN bACMAPSDTr[4]; /* no use */
+
BOOLEAN bNeedSendTriggerFrame;
BOOLEAN bAPSDForcePowerSave; // Force power save mode, should only use in APSD-STAUT
ULONG TriggerTimerCount;
UCHAR MaxSPLength;
UCHAR BBPCurrentBW; // BW_10, BW_20, BW_40
+ // move to MULTISSID_STRUCT for MBSS
+ //HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
REG_TRANSMIT_SETTING RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful.
+ //UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode
UCHAR TxRate; // Same value to fill in TXD. TxRate is 6-bit
UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
UCHAR TxRateIndex; // Tx rate index in RateSwitchTable
UCHAR TxRateTableSize; // Valid Tx rate table size in RateSwitchTable
+ //BOOLEAN bAutoTxRateSwitch;
UCHAR MinTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
UCHAR RtsRate; // RATE_xxx
HTTRANSMIT_SETTING MlmeTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
UCHAR TxPower; // in unit of mW
ULONG TxPowerPercentage; // 0~100 %
ULONG TxPowerDefault; // keep for TxPowerPercentage
+ UINT8 PwrConstraint;
BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable
ULONG UseBGProtection; // 0: auto, 1: always use, 2: always not use
BOOLEAN bUseShortSlotTime; // 0: disable, 1 - use short slot (9us)
- BOOLEAN bEnableTxBurst; // 1: enble TX PACKET BURST, 0: disable TX PACKET BURST
+ BOOLEAN bEnableTxBurst; // 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST
BOOLEAN bAggregationCapable; // 1: enable TX aggregation when the peer supports it
BOOLEAN bPiggyBackCapable; // 1: enable TX piggy-back according MAC's version
BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec.
BOOLEAN NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
ABGBAND_STATE BandState; // For setting BBP used on B/G or A mode.
-#ifdef RT30xx
- BOOLEAN bRxAntDiversity; // 0:disable, 1:enable Software Rx Antenna Diversity.
-#endif
// IEEE802.11H--DFS.
RADAR_DETECT_STRUCT RadarDetect;
BOOLEAN bHTProtect;
BOOLEAN bMIMOPSEnable;
BOOLEAN bBADecline;
+//2008/11/05: KH add to support Antenna power-saving of AP<--
+ BOOLEAN bGreenAPEnable;
+//2008/11/05: KH add to support Antenna power-saving of AP-->
BOOLEAN bDisableReordering;
BOOLEAN bForty_Mhz_Intolerant;
BOOLEAN bExtChannelSwitchAnnouncement;
UCHAR TxStream;
UCHAR RxStream;
- // transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
- UCHAR McastTransmitMcs;
- UCHAR McastTransmitPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-
BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
BOOLEAN bMultipleIRP; // Multiple Bulk IN flag
UCHAR NumOfBulkInIRP; // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
RT_HT_CAPABILITY SupportedHtPhy;
UCHAR TxBulkFactor;
UCHAR RxBulkFactor;
+ BOOLEAN IsUpdateBeacon;
BEACON_SYNC_STRUCT *pBeaconSync;
RALINK_TIMER_STRUCT BeaconUpdateTimer;
UINT32 BeaconAdjust;
UINT32 BeaconFactor;
UINT32 BeaconRemain;
-#endif // RT2870 //
-
+#endif // RTMP_MAC_USB //
NDIS_SPIN_LOCK MeasureReqTabLock;
PMEASURE_REQ_TAB pMeasureReqTab;
NDIS_SPIN_LOCK TpcReqTabLock;
PTPC_REQ_TAB pTpcReqTab;
- // transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
- HTTRANSMIT_SETTING MCastPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
+ BOOLEAN PSPXlink; // 0: Disable. 1: Enable
+
+#if defined(RT305x)||defined(RT30xx)
+ // request by Gary, for High Power issue
+ UCHAR HighPowerPatchDisabled;
+#endif
+
+ BOOLEAN HT_DisallowTKIP; /* Restrict the encryption type in 11n HT mode */
} COMMON_CONFIG, *PCOMMON_CONFIG;
+
/* Modified by Wu Xi-Kun 4/21/2006 */
// STA configuration and status
typedef struct _STA_ADMIN_CONFIG {
NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
+ UCHAR WpaPassPhrase[64]; // WPA PSK pass phrase
+ UINT WpaPassPhraseLen; // the length of WPA PSK pass phrase
UCHAR PMK[32]; // WPA PSK mode PMK
UCHAR PTK[64]; // WPA PSK mode PTK
UCHAR GTK[32]; // GTK from authenticator
BOOLEAN bRadio; // Radio state, And of Sw & Hw radio state
BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation
-#ifdef RT2860
- BOOLEAN AdhocBOnlyJoined; // Indicate Adhoc B Join.
- BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join.
- BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join.
-#endif
- // New for WPA, windows want us to to keep association information and
+
+ // New for WPA, windows want us to keep association information and
// Fixed IEs from last association response
NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
USHORT ReqVarIELen; // Length of next VIE include EID & Length
UCHAR RSNIE_Len;
UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be little-endian format.
- // New variables used for CCX 1.0
- BOOLEAN bCkipOn;
- BOOLEAN bCkipCmicOn;
- UCHAR CkipFlag;
- UCHAR GIV[3]; //for CCX iv
- UCHAR RxSEQ[4];
- UCHAR TxSEQ[4];
- UCHAR CKIPMIC[4];
- UCHAR LeapAuthMode;
- LEAP_AUTH_INFO LeapAuthInfo;
- UCHAR HashPwd[16];
- UCHAR NetworkChallenge[8];
- UCHAR NetworkChallengeResponse[24];
- UCHAR PeerChallenge[8];
-
- UCHAR PeerChallengeResponse[24];
- UCHAR SessionKey[16]; //Network session keys (NSK)
- RALINK_TIMER_STRUCT LeapAuthTimer;
- ROGUEAP_TABLE RogueApTab; //Cisco CCX1 Rogue AP Detection
-
- // New control flags for CCX
- CCX_CONTROL CCXControl; // Master administration state
- BOOLEAN CCXEnable; // Actual CCX state
- UCHAR CCXScanChannel; // Selected channel for CCX beacon request
- USHORT CCXScanTime; // Time out to wait for beacon and probe response
- UCHAR CCXReqType; // Current processing CCX request type
- BSS_TABLE CCXBssTab; // BSS Table
- UCHAR FrameReportBuf[2048]; // Buffer for creating frame report
- USHORT FrameReportLen; // Current Frame report length
ULONG CLBusyBytes; // Save the total bytes received durning channel load scan time
USHORT RPIDensity[8]; // Array for RPI density collection
- // Start address of each BSS table within FrameReportBuf
- // It's important to update the RxPower of the corresponding Bss
- USHORT BssReportOffset[MAX_LEN_OF_BSS_TABLE];
- USHORT BeaconToken; // Token for beacon report
- ULONG LastBssIndex; // Most current reported Bss index
- RM_REQUEST_ACTION MeasurementRequest[16]; // Saved measurement request
+
UCHAR RMReqCnt; // Number of measurement request saved.
UCHAR CurrentRMReqIdx; // Number of measurement request saved.
BOOLEAN ParallelReq; // Parallel measurement, only one request performed,
USHORT ParallelDuration; // Maximum duration for parallel measurement
UCHAR ParallelChannel; // Only one channel with parallel measurement
USHORT IAPPToken; // IAPP dialog token
- UCHAR CCXQosECWMin; // Cisco QOS ECWMin for AC 0
- UCHAR CCXQosECWMax; // Cisco QOS ECWMax for AC 0
// Hack for channel load and noise histogram parameters
UCHAR NHFactor; // Parameter for Noise histogram
UCHAR CLFactor; // Parameter for channel load
- UCHAR KRK[16]; //Key Refresh Key.
- UCHAR BTK[32]; //Base Transient Key
- BOOLEAN CCKMLinkUpFlag;
- ULONG CCKMRN; //(Re)Association request number.
- LARGE_INTEGER CCKMBeaconAtJoinTimeStamp; //TSF timer for Re-assocaite to the new AP
- UCHAR AironetCellPowerLimit; //in dBm
- UCHAR AironetIPAddress[4]; //eg. 192.168.1.1
- BOOLEAN CCXAdjacentAPReportFlag; //flag for determining report Assoc Lost time
- CHAR CCXAdjacentAPSsid[MAX_LEN_OF_SSID]; //Adjacent AP's SSID report
- UCHAR CCXAdjacentAPSsidLen; // the actual ssid length in used
- UCHAR CCXAdjacentAPBssid[MAC_ADDR_LEN]; //Adjacent AP's BSSID report
- USHORT CCXAdjacentAPChannel;
- ULONG CCXAdjacentAPLinkDownTime; //for Spec S32.
-
RALINK_TIMER_STRUCT StaQuickResponeForRateUpTimer;
BOOLEAN StaQuickResponeForRateUpTimerRunning;
RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer;
// Fast Roaming
- BOOLEAN bFastRoaming; // 0:disable fast roaming, 1:enable fast roaming
+ BOOLEAN bAutoRoaming; // 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI
CHAR dBmToRoam; // the condition to roam when receiving Rssi less than this value. It's negative value.
BOOLEAN IEEE8021X;
// 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
UCHAR WpaSupplicantUP;
UCHAR WpaSupplicantScanCount;
+ BOOLEAN bRSN_IE_FromWpaSupplicant;
+ BOOLEAN bLostAp;
CHAR dev_name[16];
USHORT OriDevType;
RT_HT_PHY_INFO DesiredHtPhyInfo;
BOOLEAN bAutoTxRateSwitch;
-#ifdef RT2860
+#ifdef RTMP_MAC_PCI
UCHAR BBPR3;
-#endif
+#endif // RTMP_MAC_PCI //
+
+
+
+
+ BOOLEAN bAutoConnectByBssid;
+ ULONG BeaconLostTime; // seconds
+ BOOLEAN bForceTxBurst; // 1: force enble TX PACKET BURST, 0: disable
} STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
// This data structure keep the current active BSS/IBSS's configuration that this STA
RT_HT_CAPABILITY SupportedHtPhy;
} STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
-#ifdef RT2870
-// for USB interface, avoid in interrupt when write key
-typedef struct RT_ADD_PAIRWISE_KEY_ENTRY {
- NDIS_802_11_MAC_ADDRESS MacAddr;
- USHORT MacTabMatchWCID; // ASIC
- CIPHER_KEY CipherKey;
-} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
-#endif // RT2870 //
-// ----------- start of AP --------------------------
-// AUTH-RSP State Machine Aux data structure
-typedef struct _AP_MLME_AUX {
- UCHAR Addr[MAC_ADDR_LEN];
- USHORT Alg;
- CHAR Challenge[CIPHER_TEXT_LEN];
-} AP_MLME_AUX, *PAP_MLME_AUX;
-// structure to define WPA Group Key Rekey Interval
-typedef struct PACKED _RT_802_11_WPA_REKEY {
- ULONG ReKeyMethod; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
- ULONG ReKeyInterval; // time-based: seconds, packet-based: kilo-packets
-} RT_WPA_REKEY,*PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
+
+
typedef struct _MAC_TABLE_ENTRY {
//Choose 1 from ValidAsWDS and ValidAsCLI to validize.
UCHAR RSNIE_Len;
UCHAR RSN_IE[MAX_LEN_OF_RSNIE];
UCHAR ANonce[LEN_KEY_DESC_NONCE];
+ UCHAR SNonce[LEN_KEY_DESC_NONCE];
UCHAR R_Counter[LEN_KEY_DESC_REPLAY];
UCHAR PTK[64];
UCHAR ReTryCounter;
RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; // A timer which enqueue EAPoL-Start for triggering PSK SM
NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
NDIS_802_11_WEP_STATUS WepStatus;
+ NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
AP_WPA_STATE WpaState;
GTK_STATE GTKState;
USHORT PortSecured;
//====================================================
//WDS entry needs these
-// rt2860 add this. if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
+// if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
UINT MatchWDSTabIdx;
UCHAR MaxSupportedRate;
UCHAR CurrTxRate;
UCHAR CurrTxRateIndex;
// to record the each TX rate's quality. 0 is best, the bigger the worse.
USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
+// USHORT OneSecTxOkCount;
UINT32 OneSecTxNoRetryOkCount;
UINT32 OneSecTxRetryOkCount;
UINT32 OneSecTxFailCount;
UINT32 TXMCSSuccessful[16];
UINT32 TXMCSFailed[16];
UINT32 TXMCSAutoFallBack[16][16];
-#ifdef RT2870
+
ULONG LastBeaconRxTime;
-#endif
+
+ ULONG AssocDeadLine;
} MAC_TABLE_ENTRY, *PMAC_TABLE_ENTRY;
typedef struct _MAC_TABLE {
BOOLEAN fAnyStationInPsm;
BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip.
BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP
-#ifdef RT2870
BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset
-#endif
BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/
BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF.
BOOLEAN fAnyStation20Only; // Check if any Station can't support GF.
BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS
+//2008/10/28: KH add to support Antenna power-saving of AP<--
+//2008/10/28: KH add to support Antenna power-saving of AP-->
} MAC_TABLE, *PMAC_TABLE;
-#define IS_HT_STA(_pMacEntry) \
- (_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define IS_HT_RATE(_pMacEntry) \
- (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define PEER_IS_HT_RATE(_pMacEntry) \
- (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-
-typedef struct _WDS_ENTRY {
- BOOLEAN Valid;
- UCHAR Addr[MAC_ADDR_LEN];
- ULONG NoDataIdleCount;
- struct _WDS_ENTRY *pNext;
-} WDS_ENTRY, *PWDS_ENTRY;
-
-typedef struct _WDS_TABLE_ENTRY {
- USHORT Size;
- UCHAR WdsAddr[MAC_ADDR_LEN];
- WDS_ENTRY *Hash[HASH_TABLE_SIZE];
- WDS_ENTRY Content[MAX_LEN_OF_MAC_TABLE];
- UCHAR MaxSupportedRate;
- UCHAR CurrTxRate;
- USHORT TxQuality[MAX_LEN_OF_SUPPORTED_RATES];
- USHORT OneSecTxOkCount;
- USHORT OneSecTxRetryOkCount;
- USHORT OneSecTxFailCount;
- ULONG CurrTxRateStableTime; // # of second in current TX rate
- UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition
-} WDS_TABLE_ENTRY, *PWDS_TABLE_ENTRY;
-
-typedef struct _RT_802_11_WDS_ENTRY {
- PNET_DEV dev;
- UCHAR Valid;
- UCHAR PhyMode;
- UCHAR PeerWdsAddr[MAC_ADDR_LEN];
- UCHAR MacTabMatchWCID; // ASIC
- NDIS_802_11_WEP_STATUS WepStatus;
- UCHAR KeyIdx;
- CIPHER_KEY WdsKey;
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- BOOLEAN bAutoTxRateSwitch;
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting.
-} RT_802_11_WDS_ENTRY, *PRT_802_11_WDS_ENTRY;
-
-typedef struct _WDS_TABLE {
- UCHAR Mode;
- ULONG Size;
- RT_802_11_WDS_ENTRY WdsEntry[MAX_WDS_ENTRY];
-} WDS_TABLE, *PWDS_TABLE;
-
-typedef struct _APCLI_STRUCT {
- PNET_DEV dev;
-#ifdef RTL865X_SOC
- unsigned int mylinkid;
-#endif
- BOOLEAN Enable; // Set it as 1 if the apcli interface was configured to "1" or by iwpriv cmd "ApCliEnable"
- BOOLEAN Valid; // Set it as 1 if the apcli interface associated success to remote AP.
- UCHAR MacTabWCID; //WCID value, which point to the entry of ASIC Mac table.
- UCHAR SsidLen;
- CHAR Ssid[MAX_LEN_OF_SSID];
-
- UCHAR CfgSsidLen;
- CHAR CfgSsid[MAX_LEN_OF_SSID];
- UCHAR CfgApCliBssid[ETH_LENGTH_OF_ADDRESS];
- UCHAR CurrentAddress[ETH_LENGTH_OF_ADDRESS];
-
- ULONG ApCliRcvBeaconTime;
-
- ULONG CtrlCurrState;
- ULONG SyncCurrState;
- ULONG AuthCurrState;
- ULONG AssocCurrState;
- ULONG WpaPskCurrState;
-
- USHORT AuthReqCnt;
- USHORT AssocReqCnt;
-
- ULONG ClientStatusFlags;
- UCHAR MpduDensity;
-
- NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
- NDIS_802_11_WEP_STATUS WepStatus;
-
- // Add to support different cipher suite for WPA2/WPA mode
- NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Multicast cipher suite
- NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher suite
- BOOLEAN bMixCipher; // Indicate current Pair & Group use different cipher suites
- USHORT RsnCapability;
-
- UCHAR PSK[100]; // reserve PSK key material
- UCHAR PSKLen;
- UCHAR PMK[32]; // WPA PSK mode PMK
- UCHAR GTK[32]; // GTK from authenticator
-
- CIPHER_KEY SharedKey[SHARE_KEY_NUM];
- UCHAR DefaultKeyId;
-
- // store RSN_IE built by driver
- UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be convert to little-endian format.
- UCHAR RSNIE_Len;
- // For WPA countermeasures
- ULONG LastMicErrorTime; // record last MIC error time
- BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred.
- // For WPA-PSK supplicant state
- UCHAR SNonce[32]; // SNonce for WPA-PSK
- UCHAR GNonce[32]; // GNonce for WPA-PSK from authenticator
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- BOOLEAN bAutoTxRateSwitch;
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting.
-} APCLI_STRUCT, *PAPCLI_STRUCT;
-// ----------- end of AP ----------------------------
struct wificonf
{
};
-
-
-typedef struct _INF_PCI_CONFIG
+typedef struct _RTMP_DEV_INFO_
{
- PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use
-}INF_PCI_CONFIG;
+ UCHAR chipName[16];
+ RTMP_INF_TYPE infType;
+}RTMP_DEV_INFO;
-typedef struct _INF_USB_CONFIG
-{
- UINT BulkInEpAddr; // bulk-in endpoint address
- UINT BulkOutEpAddr[6]; // bulk-out endpoint address
-}INF_USB_CONFIG;
-#ifdef IKANOS_VX_1X0
- typedef void (*IkanosWlanTxCbFuncP)(void *, void *);
- struct IKANOS_TX_INFO
- {
- struct net_device *netdev;
- IkanosWlanTxCbFuncP *fp;
- };
-#endif // IKANOS_VX_1X0 //
-
-#ifdef DBG_DIAGNOSE
-#define DIAGNOSE_TIME 10 // 10 sec
-typedef struct _RtmpDiagStrcut_
-{ // Diagnosis Related element
- unsigned char inited;
- unsigned char qIdx;
- unsigned char ArrayStartIdx;
- unsigned char ArrayCurIdx;
- // Tx Related Count
- USHORT TxDataCnt[DIAGNOSE_TIME];
- USHORT TxFailCnt[DIAGNOSE_TIME];
- USHORT TxDescCnt[DIAGNOSE_TIME][24]; // 3*3 // TxDesc queue length in scale of 0~14, >=15
- USHORT TxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
- USHORT TxSWQueCnt[DIAGNOSE_TIME][9]; // TxSwQueue length in scale of 0, 1, 2, 3, 4, 5, 6, 7, >=8
-
- USHORT TxAggCnt[DIAGNOSE_TIME];
- USHORT TxNonAggCnt[DIAGNOSE_TIME];
- USHORT TxAMPDUCnt[DIAGNOSE_TIME][24]; // 3*3 // 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1.
- USHORT TxRalinkCnt[DIAGNOSE_TIME]; // TxRalink Aggregation Count in 1 sec scale.
- USHORT TxAMSDUCnt[DIAGNOSE_TIME]; // TxAMSUD Aggregation Count in 1 sec scale.
-
- // Rx Related Count
- USHORT RxDataCnt[DIAGNOSE_TIME]; // Rx Total Data count.
- USHORT RxCrcErrCnt[DIAGNOSE_TIME];
- USHORT RxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
-}RtmpDiagStruct;
-#endif // DBG_DIAGNOSE //
+struct _RTMP_CHIP_OP_
+{
+ /* Calibration access related callback functions */
+ int (*eeinit)(RTMP_ADAPTER *pAd); /* int (*eeinit)(RTMP_ADAPTER *pAd); */
+ int (*eeread)(RTMP_ADAPTER *pAd, USHORT offset, PUSHORT pValue); /* int (*eeread)(RTMP_ADAPTER *pAd, int offset, PUSHORT pValue); */
+ int (*eewrite)(RTMP_ADAPTER *pAd, USHORT offset, USHORT value);; /* int (*eewrite)(RTMP_ADAPTER *pAd, int offset, USHORT value); */
+
+ /* MCU related callback functions */
+ int (*loadFirmware)(RTMP_ADAPTER *pAd); /* int (*loadFirmware)(RTMP_ADAPTER *pAd); */
+ int (*eraseFirmware)(RTMP_ADAPTER *pAd); /* int (*eraseFirmware)(RTMP_ADAPTER *pAd); */
+ int (*sendCommandToMcu)(RTMP_ADAPTER *pAd, UCHAR cmd, UCHAR token, UCHAR arg0, UCHAR arg1);; /* int (*sendCommandToMcu)(RTMP_ADAPTER *pAd, UCHAR cmd, UCHAR token, UCHAR arg0, UCHAR arg1); */
+
+ /* RF access related callback functions */
+ REG_PAIR *pRFRegTable;
+ void (*AsicRfInit)(RTMP_ADAPTER *pAd);
+ void (*AsicRfTurnOn)(RTMP_ADAPTER *pAd);
+ void (*AsicRfTurnOff)(RTMP_ADAPTER *pAd);
+ void (*AsicReverseRfFromSleepMode)(RTMP_ADAPTER *pAd);
+ void (*AsicHaltAction)(RTMP_ADAPTER *pAd);
+};
//
// The miniport adapter structure
//
-typedef struct _RTMP_ADAPTER
+struct _RTMP_ADAPTER
{
PVOID OS_Cookie; // save specific structure relative to OS
PNET_DEV net_dev;
ULONG VirtualIfCnt;
-#ifdef RT2860
+ RTMP_CHIP_OP chipOps;
+ USHORT ThisTbttNumToNextWakeUp;
+
+#ifdef RTMP_MAC_PCI
+/*****************************************************************************************/
+/* PCI related parameters */
+/*****************************************************************************************/
+ PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use
+ unsigned int irq_num;
+
USHORT LnkCtrlBitMask;
USHORT RLnkCtrlConfiguration;
USHORT RLnkCtrlOffset;
USHORT HostLnkCtrlOffset;
USHORT PCIePowerSaveLevel;
BOOLEAN bPCIclkOff; // flag that indicate if the PICE power status in Configuration SPace..
- ULONG CheckDmaBusyCount; // Check Interrupt Status Register Count.
- USHORT ThisTbttNumToNextWakeUp;
- ULONG SameRxByteCount;
-
-
-/*****************************************************************************************/
-/* PCI related parameters */
-/*****************************************************************************************/
- PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use
+ BOOLEAN bPCIclkOffDisableTx; //
UINT int_enable_reg;
UINT int_disable_mask;
RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors
RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors
RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA
-#endif
+#endif // RTMP_MAC_PCI //
+
NDIS_SPIN_LOCK irq_lock;
UCHAR irq_disabled;
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
/*****************************************************************************************/
/* USB related parameters */
/*****************************************************************************************/
ULONG BulkFlags;
BOOLEAN bUsbTxBulkAggre; // Flags for bulk out data priority
-
- //======Timer Thread
- RT2870_TIMER_QUEUE TimerQ;
- NDIS_SPIN_LOCK TimerQLock;
-
-
//======Cmd Thread
CmdQ CmdQ;
NDIS_SPIN_LOCK CmdQLock; // CmdQLock spinlock
-
- BOOLEAN TimerFunc_kill;
- BOOLEAN mlme_kill;
-
+ RTMP_OS_TASK cmdQTask;
//======Semaphores (event)
- struct semaphore mlme_semaphore; /* to sleep thread on */
- struct semaphore RTUSBCmd_semaphore; /* to sleep thread on */
- struct semaphore RTUSBTimer_semaphore;
- struct completion TimerQComplete;
- struct completion mlmeComplete;
- struct completion CmdQComplete;
+ RTMP_OS_SEM UsbVendorReq_semaphore;
+ PVOID UsbVendorReqBuf;
wait_queue_head_t *wait;
-#endif // RT2870 //
+#endif // RTMP_MAC_USB //
+/*****************************************************************************************/
+/* RBUS related parameters */
+/*****************************************************************************************/
+
+
+/*****************************************************************************************/
+/* Both PCI/USB related parameters */
+/*****************************************************************************************/
+ //RTMP_DEV_INFO chipInfo;
+ RTMP_INF_TYPE infType;
/*****************************************************************************************/
- /* Both PCI/USB related parameters */
+/* Driver Mgmt related parameters */
/*****************************************************************************************/
+ RTMP_OS_TASK mlmeTask;
+#ifdef RTMP_TIMER_TASK_SUPPORT
+ // If you want use timer task to handle the timer related jobs, enable this.
+ RTMP_TIMER_TASK_QUEUE TimerQ;
+ NDIS_SPIN_LOCK TimerQLock;
+ RTMP_OS_TASK timerTask;
+#endif // RTMP_TIMER_TASK_SUPPORT //
/*****************************************************************************************/
BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; // for ensuring RTUSBDeQueuePacket get call once
NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING];
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
// Data related context and AC specified, 4 AC supported
NDIS_SPIN_LOCK BulkOutLock[6]; // BulkOut spinlock for 4 ACs
NDIS_SPIN_LOCK MLMEBulkOutLock; // MLME BulkOut lock
UCHAR bulkResetPipeid;
BOOLEAN MgmtBulkPending;
ULONG bulkResetReq[6];
-#endif // RT2870 //
+#endif // RTMP_MAC_USB //
// resource for software backlog queues
QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; // 4 AC + 1 HCCA
/*****************************************************************************************/
/* Rx related parameters */
/*****************************************************************************************/
-#ifdef RT2860
+
+#ifdef RTMP_MAC_PCI
RTMP_RX_RING RxRing;
NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock
-#endif
-#ifdef RT2870
+#endif // RTMP_MAC_PCI //
+#ifdef RTMP_MAC_USB
RX_CONTEXT RxContext[RX_RING_SIZE]; // 1 for redundant multiple IRP bulk in.
NDIS_SPIN_LOCK BulkInLock; // BulkIn spinlock for 4 ACs
- UCHAR PendingRx; // The Maxima pending Rx value should be RX_RING_SIZE.
+ UCHAR PendingRx; // The Maximum pending Rx value should be RX_RING_SIZE.
UCHAR NextRxBulkInIndex; // Indicate the current RxContext Index which hold by Host controller.
UCHAR NextRxBulkInReadIndex; // Indicate the current RxContext Index which driver can read & process it.
ULONG NextRxBulkInPosition; // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
ULONG TransferBufferLength; // current length of the packet buffer
ULONG ReadPosition; // current read position in a packet buffer
-#endif // RT2870 //
-
+#endif // RTMP_MAC_USB //
/*****************************************************************************************/
/* ASIC related parameters */
// E2PROM
// ---------------------------
ULONG EepromVersion; // byte 0: version, byte 1: revision, byte 2~3: unused
- UCHAR EEPROMAddressNum; // 93c46=6 93c66=8
+ ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused.
USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
-#ifdef RT30xx
+ UCHAR EEPROMAddressNum; // 93c46=6 93c66=8
BOOLEAN EepromAccess;
- UCHAR EFuseTag;
-#endif
- ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused.
+ UCHAR EFuseTag;
+
// ---------------------------
// BBP Control
// ---------------------------
UCHAR BbpWriteLatch[140]; // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID
- UCHAR BbpRssiToDbmDelta;
+ CHAR BbpRssiToDbmDelta; // change from UCHAR to CHAR for high power
BBP_R66_TUNING BbpTuning;
// ----------------------------
UCHAR TxAgcStepG; // Store Tx TSSI delta increment / decrement value
CHAR TxAgcCompensateG; // Store the compensation (TxAgcStep * (idx-1))
- //+++For RT2870, the parameteres is start from BGRssiOffset1 ~ BGRssiOffset3
CHAR BGRssiOffset0; // Store B/G RSSI#0 Offset value on EEPROM 0x46h
CHAR BGRssiOffset1; // Store B/G RSSI#1 Offset value
CHAR BGRssiOffset2; // Store B/G RSSI#2 Offset value
- //---
- //+++For RT2870, the parameteres is start from ARssiOffset1 ~ ARssiOffset3
CHAR ARssiOffset0; // Store A RSSI#0 Offset value on EEPROM 0x4Ah
CHAR ARssiOffset1; // Store A RSSI#1 Offset value
CHAR ARssiOffset2; // Store A RSSI#2 Offset value
- //---
CHAR BLNAGain; // Store B/G external LNA#0 value on EEPROM 0x44h
CHAR ALNAGain0; // Store A external LNA#0 value for ch36~64
CHAR ALNAGain1; // Store A external LNA#1 value for ch100~128
CHAR ALNAGain2; // Store A external LNA#2 value for ch132~165
+#ifdef RT30xx
+ // for 3572
+ UCHAR Bbp25;
+ UCHAR Bbp26;
+ UCHAR TxMixerGain24G; // Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G
+ UCHAR TxMixerGain5G;
+#endif // RT30xx //
// ----------------------------
// LED control
// ----------------------------
USHORT Led1; // read from EEPROM 0x3c
USHORT Led2; // EEPROM 0x3e
USHORT Led3; // EEPROM 0x40
- UCHAR LedIndicatorStregth;
+ UCHAR LedIndicatorStrength;
UCHAR RssiSingalstrengthOffet;
BOOLEAN bLedOnScanning;
UCHAR LedStatus;
PSPOLL_FRAME PsPollFrame;
HEADER_802_11 NullFrame;
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
TX_CONTEXT BeaconContext[BEACON_RING_SIZE];
TX_CONTEXT NullContext;
TX_CONTEXT PsPollContext;
TX_CONTEXT RTSContext;
-#endif // RT2870 //
-
-
+#endif // RTMP_MAC_USB //
//=========AP===========
//=======STA===========
-/* Modified by Wu Xi-Kun 4/21/2006 */
// -----------------------------------------------
// STA specific configuration & operation status
// used only when pAd->OpMode == OPMODE_STA
NDIS_MEDIA_STATE IndicateMediaState; // Base on Indication state, default is NdisMediaStateDisConnected
+ /* MAT related parameters */
+
// configuration: read from Registry & E2PROM
BOOLEAN bLocalAdminMAC; // Use user changed MAC
UCHAR PermanentAddress[MAC_ADDR_LEN]; // Factory default MAC address
// flags, see fRTMP_ADAPTER_xxx flags
ULONG Flags; // Represent current device status
-#ifdef RT2860
ULONG PSFlags; // Power Save operation flag.
-#endif
// current TX sequence #
USHORT Sequence;
/*****************************************************************************************/
/* Statistic related parameters */
/*****************************************************************************************/
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
ULONG BulkOutDataOneSecCount;
ULONG BulkInDataOneSecCount;
ULONG BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
ULONG watchDogRxCnt;
ULONG watchDogRxOverFlowCnt;
ULONG watchDogTxPendingCnt[NUM_OF_TX_RING];
-#endif // RT2870 //
+ INT TransferedLength[NUM_OF_TX_RING];
+#endif // RTMP_MAC_USB //
BOOLEAN bUpdateBcnCntDone;
ULONG watchDogMacDeadlock; // prevent MAC/BBP into deadlock condition
// ----------------------------
// DEBUG paramerts
// ----------------------------
+ //ULONG DebugSetting[4];
BOOLEAN bBanAllBaSetup;
BOOLEAN bPromiscuous;
// ----------------------------
// rt2860c emulation-use Parameters
// ----------------------------
- ULONG rtsaccu[30];
- ULONG ctsaccu[30];
- ULONG cfendaccu[30];
- ULONG bacontent[16];
- ULONG rxint[RX_RING_SIZE+1];
- UCHAR rcvba[60];
+ //ULONG rtsaccu[30];
+ //ULONG ctsaccu[30];
+ //ULONG cfendaccu[30];
+ //ULONG bacontent[16];
+ //ULONG rxint[RX_RING_SIZE+1];
+ //UCHAR rcvba[60];
BOOLEAN bLinkAdapt;
BOOLEAN bForcePrintTX;
BOOLEAN bForcePrintRX;
- BOOLEAN bDisablescanning; //defined in RT2870 USB
+ //BOOLEAN bDisablescanning; //defined in RT2870 USB
BOOLEAN bStaFifoTest;
BOOLEAN bProtectionTest;
BOOLEAN bHCCATest;
ULONG OneSecondnonBEpackets; // record non BE packets per second
-#if WIRELESS_EXT >= 12
+#ifdef LINUX
struct iw_statistics iw_stats;
-#endif
struct net_device_stats stats;
+#endif // LINUX //
+
+
+
+
ULONG TbttTickCount;
#ifdef PCI_MSI_SUPPORT
UCHAR flg_be_adjust;
ULONG be_adjust_last_time;
-#ifdef IKANOS_VX_1X0
- struct IKANOS_TX_INFO IkanosTxInfo;
- struct IKANOS_TX_INFO IkanosRxInfo[MAX_MBSSID_NUM + MAX_WDS_ENTRY + MAX_APCLI_NUM + MAX_MESH_NUM];
-#endif // IKANOS_VX_1X0 //
-#ifdef DBG_DIAGNOSE
- RtmpDiagStruct DiagStruct;
-#endif // DBG_DIAGNOSE //
+
+
+ UINT8 FlgCtsEnabled;
UINT8 PM_FlgSuspend;
#ifdef RT30xx
-//======efuse
+#ifdef RTMP_EFUSE_SUPPORT
BOOLEAN bUseEfuse;
BOOLEAN bEEPROMFile;
+ BOOLEAN bFroceEEPROMBuffer;
+ UCHAR EEPROMImage[1024];
+#endif // RTMP_EFUSE_SUPPORT //
#endif // RT30xx //
+};
-} RTMP_ADAPTER, *PRTMP_ADAPTER;
-//
-// Cisco IAPP format
-//
-typedef struct _CISCO_IAPP_CONTENT_
-{
- USHORT Length; //IAPP Length
- UCHAR MessageType; //IAPP type
- UCHAR FunctionCode; //IAPP function type
- UCHAR DestinaionMAC[MAC_ADDR_LEN];
- UCHAR SourceMAC[MAC_ADDR_LEN];
- USHORT Tag; //Tag(element IE) - Adjacent AP report
- USHORT TagLength; //Length of element not including 4 byte header
- UCHAR OUI[4]; //0x00, 0x40, 0x96, 0x00
- UCHAR PreviousAP[MAC_ADDR_LEN]; //MAC Address of access point
- USHORT Channel;
- USHORT SsidLen;
- UCHAR Ssid[MAX_LEN_OF_SSID];
- USHORT Seconds; //Seconds that the client has been disassociated.
-} CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
#define DELAYINTMASK 0x0003fffb
#define INTMASK 0x0003fffb
#define FifoStaFullInt 0x00002000 // fifo statistics full interrupt
+/***************************************************************************
+ * Rx Path software control block related data structures
+ **************************************************************************/
typedef struct _RX_BLK_
{
+// RXD_STRUC RxD; // sample
RT28XX_RXD_STRUC RxD;
PRXWI_STRUC pRxWI;
PHEADER_802_11 pHeader;
#define LENGTH_ARALINK_SUBFRAMEHEAD 14
#define LENGTH_ARALINK_HEADER_FIELD 2
+
+/***************************************************************************
+ * Tx Path software control block related data structures
+ **************************************************************************/
#define TX_UNKOWN_FRAME 0x00
#define TX_MCAST_FRAME 0x01
#define TX_LEGACY_FRAME 0x02
PUCHAR pSrcBufData; // Reference to the sk_buff->data, will changed depends on hanlding progresss
UINT SrcBufLen; // Length of packet payload which not including Layer 2 header
PUCHAR pExtraLlcSnapEncap; // NULL means no extra LLC/SNAP is required
- UCHAR HeaderBuf[80]; // TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
+ UCHAR HeaderBuf[128]; // TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
+ //RT2870 2.1.0.0 uses only 80 bytes
+ //RT3070 2.1.1.0 uses only 96 bytes
UCHAR MpduHeaderLen; // 802.11 header length NOT including the padding
UCHAR HdrPadLen; // recording Header Padding Length;
UCHAR apidx; // The interface associated to this packet
#define fTX_bAllowFrag 0x0020 // allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment
#define fTX_bMoreData 0x0040 // there are more data packets in PowerSave Queue
#define fTX_bWMM 0x0080 // QOS Data
-
#define fTX_bClearEAPFrame 0x0100
-#define TX_BLK_ASSIGN_FLAG(_pTxBlk, _flag, value) \
- do { \
- if (value) \
- (_pTxBlk->Flags |= _flag) \
- else \
- (_pTxBlk->Flags &= ~(_flag)) \
- }while(0)
-
#define TX_BLK_SET_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags |= _flag)
#define TX_BLK_TEST_FLAG(_pTxBlk, _flag) (((_pTxBlk->Flags & _flag) == _flag) ? 1 : 0)
#define TX_BLK_CLEAR_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags &= ~(_flag))
-//------------------------------------------------------------------------------------------
-
-#ifdef RT2860
-//
-// Enable & Disable NIC interrupt via writing interrupt mask register
-// Since it use ADAPTER structure, it have to be put after structure definition.
-//
-__inline VOID NICDisableInterrupt(
- IN PRTMP_ADAPTER pAd)
-{
- RTMP_IO_WRITE32(pAd, INT_MASK_CSR, 0x0); // 0: disable
- //RTMP_IO_WRITE32(pAd, PBF_INT_ENA, 0x0); // 0x418 is for firmware . SW doesn't handle here.
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE);
-}
-
-__inline VOID NICEnableInterrupt(
- IN PRTMP_ADAPTER pAd)
-{
- //
- // Flag "fOP_STATUS_DOZE" On, means ASIC put to sleep, else means ASIC WakeUp
- // To prevent System hang, we should enalbe the interrupt when
- // ASIC is already Wake Up.
- //
- // RT2661 => when ASIC is sleeping, MAC register cannot be read and written.
- // RT2860 => when ASIC is sleeping, MAC register can be read and written.
- //if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- {
- RTMP_IO_WRITE32(pAd, INT_MASK_CSR, pAd->int_enable_reg /*DELAYINTMASK*/); // 1:enable
- }
- //else
- // DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_DOZE !\n"));
-
- //RTMP_IO_WRITE32(pAd, PBF_INT_ENA, 0x00000030); // 1 : enable
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE);
-}
+/***************************************************************************
+ * Other static inline function definitions
+ **************************************************************************/
static inline VOID ConvertMulticastIP2MAC(
IN PUCHAR pIpAddr,
IN PUCHAR *ppMacAddr,
return;
}
-#endif /* RT2860 */
-BOOLEAN RTMPCheckForHang(
- IN NDIS_HANDLE MiniportAdapterContext
- );
-VOID RTMPHalt(
- IN NDIS_HANDLE MiniportAdapterContext
- );
+char *GetPhyMode(int Mode);
+char* GetBW(int BW);
//
// Private routines in rtmp_init.c
//
NDIS_STATUS RTMPAllocAdapterBlock(
IN PVOID handle,
- OUT PRTMP_ADAPTER *ppAdapter
- );
+ OUT PRTMP_ADAPTER *ppAdapter);
NDIS_STATUS RTMPAllocTxRxRingMemory(
- IN PRTMP_ADAPTER pAd
- );
-
-NDIS_STATUS RTMPFindAdapter(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_HANDLE WrapperConfigurationContext
- );
+ IN PRTMP_ADAPTER pAd);
NDIS_STATUS RTMPReadParametersHook(
- IN PRTMP_ADAPTER pAd
- );
+ IN PRTMP_ADAPTER pAd);
+
+NDIS_STATUS RTMPSetProfileParameters(
+ IN RTMP_ADAPTER *pAd,
+ IN PSTRING pBuffer);
+
+INT RTMPGetKeyParameter(
+ IN PSTRING key,
+ OUT PSTRING dest,
+ IN INT destsize,
+ IN PSTRING buffer,
+ IN BOOLEAN bTrimSpace);
VOID RTMPFreeAdapter(
- IN PRTMP_ADAPTER pAd
- );
+ IN PRTMP_ADAPTER pAd);
NDIS_STATUS NICReadRegParameters(
IN PRTMP_ADAPTER pAd,
- IN NDIS_HANDLE WrapperConfigurationContext
- );
+ IN NDIS_HANDLE WrapperConfigurationContext);
-#ifdef RT2870
-VOID NICInitRT30xxRFRegisters(
+#ifdef RTMP_RF_RW_SUPPORT
+VOID NICInitRFRegisters(
IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
+
+VOID RtmpChipOpsRFHook(
+ IN RTMP_ADAPTER *pAd);
+
+NDIS_STATUS RT30xxWriteRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR regID,
+ IN UCHAR value);
+
+NDIS_STATUS RT30xxReadRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR regID,
+ IN PUCHAR pValue);
+#endif // RTMP_RF_RW_SUPPORT //
VOID NICReadEEPROMParameters(
IN PRTMP_ADAPTER pAd,
VOID NICInitAsicFromEEPROM(
IN PRTMP_ADAPTER pAd);
-VOID NICInitTxRxRingAndBacklogQueue(
- IN PRTMP_ADAPTER pAd);
NDIS_STATUS NICInitializeAdapter(
IN PRTMP_ADAPTER pAd,
NDIS_STATUS NICInitializeAsic(
IN PRTMP_ADAPTER pAd,
IN BOOLEAN bHardReset);
-#ifdef RT2860
-VOID NICRestoreBBPValue(
- IN PRTMP_ADAPTER pAd);
-#endif
+
VOID NICIssueReset(
IN PRTMP_ADAPTER pAd);
IN PRTMP_ADAPTER pAd,
IN UCHAR RingType);
-VOID RxTest(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS DbgSendPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
VOID UserCfgInit(
IN PRTMP_ADAPTER pAd);
VOID NICResetFromError(
IN PRTMP_ADAPTER pAd);
-VOID NICEraseFirmware(
+NDIS_STATUS NICLoadFirmware(
IN PRTMP_ADAPTER pAd);
-NDIS_STATUS NICLoadFirmware(
+VOID NICEraseFirmware(
IN PRTMP_ADAPTER pAd);
NDIS_STATUS NICLoadRateSwitchingParams(
VOID NICUpdateRawCounters(
IN PRTMP_ADAPTER pAd);
-ULONG RTMPNotAllZero(
- IN PVOID pSrc1,
- IN ULONG Length);
-
VOID RTMPZeroMemory(
IN PVOID pSrc,
IN ULONG Length);
IN ULONG Length);
VOID AtoH(
- char *src,
- UCHAR *dest,
+ PSTRING src,
+ PUCHAR dest,
int destlen);
UCHAR BtoH(
VOID RTMPPatchMacBbpBug(
IN PRTMP_ADAPTER pAd);
-VOID RTMPPatchCardBus(
- IN PRTMP_ADAPTER pAdapter);
-
-VOID RTMPPatchRalinkCardBus(
- IN PRTMP_ADAPTER pAdapter,
- IN ULONG Bus);
-
-ULONG RTMPReadCBConfig(
- IN ULONG Bus,
- IN ULONG Slot,
- IN ULONG Func,
- IN ULONG Offset);
-
-VOID RTMPWriteCBConfig(
- IN ULONG Bus,
- IN ULONG Slot,
- IN ULONG Func,
- IN ULONG Offset,
- IN ULONG Value);
-
VOID RTMPInitTimer(
IN PRTMP_ADAPTER pAd,
IN PRALINK_TIMER_STRUCT pTimer,
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-VOID StaPublicAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Bss2040Coexist);
-
-VOID PeerBSSTranAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
VOID PeerHTAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
IN PRTMP_ADAPTER pAd,
IN MAC_TABLE_ENTRY *pEntry);
+
VOID ActHeaderInit(
IN PRTMP_ADAPTER pAd,
IN OUT PHEADER_802_11 pHdr80211,
IN UINT8 Category,
IN UINT8 ActCode);
-BOOLEAN QosBADataParse(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bAMSDU,
- IN PUCHAR p8023Header,
- IN UCHAR WCID,
- IN UCHAR TID,
- IN USHORT Sequence,
- IN UCHAR DataOffset,
- IN USHORT Datasize,
- IN UINT CurRxIndex);
-
BOOLEAN CntlEnqueueForRecv(
IN PRTMP_ADAPTER pAd,
IN ULONG Wcid,
IN ULONG MsgLen,
IN PFRAME_BA_REQ pMsg);
-VOID BaAutoManSwitch(
- IN PRTMP_ADAPTER pAd);
-
-VOID HTIOTCheck(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BatRecIdx);
-
//
// Private routines in rtmp_data.c
//
BOOLEAN RTMPHandleRxDoneInterrupt(
IN PRTMP_ADAPTER pAd);
-VOID RTMPHandleTxDoneInterrupt(
- IN PRTMP_ADAPTER pAd);
-
BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(
IN PRTMP_ADAPTER pAd,
IN INT_SOURCE_CSR_STRUC TxRingBitmap);
IN ULONG TxRate,
IN PMAC_TABLE_ENTRY pMacEntry);
+
NDIS_STATUS Sniff2BytesFromNdisBuffer(
IN PNDIS_BUFFER pFirstBuffer,
IN UCHAR DesiredOffset,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket);
+#ifdef RTMP_MAC_PCI
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket);
+NDIS_STATUS MlmeDataHardTransmit(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR QueIdx,
+ IN PNDIS_PACKET pPacket);
+
+VOID RTMPWriteTxDescriptor(
+ IN PRTMP_ADAPTER pAd,
+ IN PTXD_STRUC pTxD,
+ IN BOOLEAN bWIV,
+ IN UCHAR QSEL);
+#endif // RTMP_MAC_PCI //
+
USHORT RTMPCalcDuration(
IN PRTMP_ADAPTER pAd,
IN UCHAR Rate,
IN OUT PTXWI_STRUC pTxWI,
IN TX_BLK *pTxBlk);
-VOID RTMPWriteTxDescriptor(
- IN PRTMP_ADAPTER pAd,
- IN PTXD_STRUC pTxD,
- IN BOOLEAN bWIV,
- IN UCHAR QSEL);
-
VOID RTMPSuspendMsduTransmission(
IN PRTMP_ADAPTER pAd);
IN UCHAR QueIdx,
IN PUCHAR pData,
IN UINT Length);
-#ifdef RT2870
-NDIS_STATUS MiniportDataMMRequest(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN PUCHAR pData,
- IN UINT Length);
-#endif
+
+//+++mark by shiang, now this function merge to MiniportMMRequest()
+//---mark by shiang, now this function merge to MiniportMMRequest()
+
VOID RTMPSendNullFrame(
IN PRTMP_ADAPTER pAd,
IN UCHAR TxRate,
IN UCHAR QueIdx,
IN UCHAR FrameGap);
-
-NDIS_STATUS RTMPApplyPacketFilter(
- IN PRTMP_ADAPTER pAd,
- IN PRT28XX_RXD_STRUC pRxD,
- IN PHEADER_802_11 pHeader);
-
PQUEUE_HEADER RTMPCheckTxSwQueue(
IN PRTMP_ADAPTER pAd,
OUT UCHAR *QueIdx);
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
+VOID WpaStaPairwiseKeySetting(
+ IN PRTMP_ADAPTER pAd);
+
+VOID WpaStaGroupKeySetting(
+ IN PRTMP_ADAPTER pAd);
+
+VOID WpaSendEapolStart(
+ IN PRTMP_ADAPTER pAdapter,
+ IN PUCHAR pBssid);
+
NDIS_STATUS RTMPCloneNdisPacket(
IN PRTMP_ADAPTER pAd,
IN BOOLEAN pInsAMSDUHdr,
IN PNDIS_PACKET pPacket);
-VOID RTMPCckBbpTuning(
- IN PRTMP_ADAPTER pAd,
- IN UINT TxRate);
-
//
// Private routines in rtmp_wep.c
//
IN PUCHAR pDest,
IN UINT Len);
-BOOLEAN RTMPDecryptData(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR pSrc,
- IN UINT Len,
- IN UINT idx);
-
BOOLEAN RTMPSoftDecryptWEP(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pData,
IN PRTMP_ADAPTER pAd,
IN UCHAR Channel) ;
-VOID AsicAntennaSelect(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel);
-
-VOID AsicAntennaSetting(
- IN PRTMP_ADAPTER pAd,
- IN ABGBAND_STATE BandState);
-
VOID AsicRfTuningExec(
IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
+VOID AsicResetBBPAgent(
+ IN PRTMP_ADAPTER pAd);
+
VOID AsicSleepThenAutoWakeup(
IN PRTMP_ADAPTER pAd,
IN USHORT TbttNumToNextWakeUp);
VOID AsicForceWakeup(
IN PRTMP_ADAPTER pAd,
-#ifdef RT2860
- IN UCHAR Level);
-#endif
-#ifdef RT2870
IN BOOLEAN bFromTx);
-#endif
VOID AsicSetBssid(
IN PRTMP_ADAPTER pAd,
IN UCHAR Token,
IN UCHAR Arg0,
IN UCHAR Arg1);
-#ifdef RT2860
+
+
+#ifdef RTMP_MAC_PCI
BOOLEAN AsicCheckCommanOk(
IN PRTMP_ADAPTER pAd,
IN UCHAR Command);
-#endif
+#endif // RTMP_MAC_PCI //
+
VOID MacAddrRandomBssid(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pAddr);
IN UCHAR SsidLen,
IN UCHAR Channel);
+ULONG BssSsidTableSearchBySSID(
+ IN BSS_TABLE *Tab,
+ IN PUCHAR pSsid,
+ IN UCHAR SsidLen);
+
VOID BssTableDeleteEntry(
IN OUT PBSS_TABLE pTab,
IN PUCHAR pBssid,
IN OUT PRTMP_ADAPTER pAd,
IN BA_ORI_ENTRY *pBAORIEntry);
-VOID BATableDeleteRECEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN BA_REC_ENTRY *pBARECEntry);
-
-VOID BATableTearORIEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR TID,
- IN UCHAR Wcid,
- IN BOOLEAN bForceDelete,
- IN BOOLEAN ALL);
-
-VOID BATableTearRECEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR TID,
- IN UCHAR WCID,
- IN BOOLEAN ALL);
-
VOID BssEntrySet(
IN PRTMP_ADAPTER pAd,
OUT PBSS_ENTRY pBss,
IN PVOID SystemSpecific3);
//----------------------------------------------
-VOID MlmeDisassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
VOID MlmeAssocReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
IN PRTMP_ADAPTER pAd,
IN PUCHAR pAddr);
-VOID SwitchBetweenWepAndCkip(
- IN PRTMP_ADAPTER pAd);
-
VOID InvalidStateWhenAssoc(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
VOID MlmeCntlConfirm(
IN PRTMP_ADAPTER pAd,
IN ULONG MsgType,
IN USHORT Msg);
-#endif // RT2870 //
+#endif // RTMP_MAC_USB //
VOID ComposePsPoll(
IN PRTMP_ADAPTER pAd);
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
-VOID MlmeScanReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
VOID InvalidStateWhenScan(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
-VOID PeerBeacon(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
VOID EnqueueProbeRequest(
IN PRTMP_ADAPTER pAd);
VOID ScanParmFill(
IN PRTMP_ADAPTER pAd,
IN OUT MLME_SCAN_REQ_STRUCT *ScanReq,
- IN CHAR Ssid[],
+ IN STRING Ssid[],
IN UCHAR SsidLen,
IN UCHAR BssType,
IN UCHAR ScanType);
ULONG MakeIbssBeacon(
IN PRTMP_ADAPTER pAd);
-VOID CCXAdjacentAPReport(
+VOID InitChannelRelatedValue(
IN PRTMP_ADAPTER pAd);
BOOLEAN MlmeScanReqSanity(
OUT USHORT *Reason);
BOOLEAN PeerWpaMessageSanity(
- IN PRTMP_ADAPTER pAd,
- IN PEAPOL_PACKET pMsg,
- IN ULONG MsgLen,
- IN UCHAR MsgType,
- IN MAC_TABLE_ENTRY *pEntry);
+ IN PRTMP_ADAPTER pAd,
+ IN PEAPOL_PACKET pMsg,
+ IN ULONG MsgLen,
+ IN UCHAR MsgType,
+ IN MAC_TABLE_ENTRY *pEntry);
BOOLEAN PeerDeauthSanity(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pAddr2);
ULONG MakeOutgoingFrame(
- OUT CHAR *Buffer,
+ OUT UCHAR *Buffer,
OUT ULONG *Length, ...);
VOID LfsrInit(
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
-VOID LinkUpExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
VOID STAMlmePeriodicExec(
PRTMP_ADAPTER pAd);
IN PRTMP_ADAPTER pAd,
IN ULONG Now32);
-VOID MlmeCheckForFastRoaming(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Now);
+BOOLEAN MlmeCheckForFastRoaming(
+ IN PRTMP_ADAPTER pAd);
VOID MlmeDynamicTxRateSwitching(
IN PRTMP_ADAPTER pAd);
VOID MlmeCalculateChannelQuality(
IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pMacEntry,
IN ULONG Now);
VOID MlmeCheckPsmChange(
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
-VOID AsicBbpTuning1(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicBbpTuning2(
- IN PRTMP_ADAPTER pAd);
-
VOID RTMPUpdateMlmeRate(
IN PRTMP_ADAPTER pAd);
VOID AsicSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant);
-#endif
+
+VOID RTMPFilterCalibration(
+ IN PRTMP_ADAPTER pAd);
+
+#ifdef RTMP_EFUSE_SUPPORT
+//2008/09/11:KH add to support efuse<--
+INT set_eFuseGetFreeBlockCount_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg);
+
+INT set_eFusedump_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg);
+
+INT set_eFuseLoadFromBin_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg);
+
+VOID eFusePhysicalReadRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData);
+
+int RtmpEfuseSupportCheck(
+ IN RTMP_ADAPTER *pAd);
+
+INT set_eFuseBufferModeWriteBack_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg);
+
+INT eFuseLoadEEPROM(
+ IN PRTMP_ADAPTER pAd);
+
+INT eFuseWriteEeeppromBuf(
+ IN PRTMP_ADAPTER pAd);
+
+VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd,
+ PUINT EfuseFreeBlock);
+
+INT eFuse_init(
+ IN PRTMP_ADAPTER pAd);
+
+NTSTATUS eFuseRead(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ OUT PUCHAR pData,
+ IN USHORT Length);
+
+NTSTATUS eFuseWrite(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN PUCHAR pData,
+ IN USHORT length);
+//2008/09/11:KH add to support efuse-->
+#endif // RTMP_EFUSE_SUPPORT //
+
+// add by johnli, RF power sequence setup
+VOID RT30xxLoadRFNormalModeSetup(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RT30xxLoadRFSleepModeSetup(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RT30xxReverseRFSleepModeSetup(
+ IN PRTMP_ADAPTER pAd);
+// end johnli
+
+#ifdef RT3070
+VOID NICInitRT3070RFRegisters(
+ IN RTMP_ADAPTER *pAd);
+#endif // RT3070 //
+
+VOID RT30xxHaltAction(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RT30xxSetRxAnt(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Ant);
+#endif // RT30xx //
VOID AsicEvaluateRxAnt(
IN PRTMP_ADAPTER pAd);
IN PRTMP_ADAPTER pAd,
IN UCHAR AironetCellPowerLimit);
-VOID RaiseClock(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 *x);
-
-VOID LowerClock(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 *x);
-
-USHORT ShiftInBits(
- IN PRTMP_ADAPTER pAd);
-
-VOID ShiftOutBits(
- IN PRTMP_ADAPTER pAd,
- IN USHORT data,
- IN USHORT count);
-
-VOID EEpromCleanup(
- IN PRTMP_ADAPTER pAd);
-
-VOID EWDS(
- IN PRTMP_ADAPTER pAd);
-
-VOID EWEN(
- IN PRTMP_ADAPTER pAd);
-
-USHORT RTMP_EEPROM_READ16(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset);
-
-VOID RTMP_EEPROM_WRITE16(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Data);
-
//
// Prototypes of function definition in rtmp_tkip.c
//
IN PCIPHER_KEY pKey,
IN UCHAR apidx);
-BOOLEAN RTMPTkipCompareMICValueWithLLC(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pLLC,
- IN PUCHAR pSrc,
- IN PUCHAR pDA,
- IN PUCHAR pSA,
- IN PUCHAR pMICKey,
- IN UINT Len);
-
VOID RTMPTkipAppendByte(
IN PTKIP_KEY_INFO pTkip,
IN UCHAR uChar);
IN ULONG DataByteCnt,
IN PCIPHER_KEY pWpaKey);
+
+
+//
+// Prototypes of function definition in cmm_info.c
+//
+INT RT_CfgSetCountryRegion(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg,
+ IN INT band);
+
+INT RT_CfgSetWirelessMode(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg);
+
+INT RT_CfgSetShortSlot(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING arg);
+
+INT RT_CfgSetWepKey(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING keyString,
+ IN CIPHER_KEY *pSharedKey,
+ IN INT keyIdx);
+
+INT RT_CfgSetWPAPSKKey(
+ IN RTMP_ADAPTER *pAd,
+ IN PSTRING keyString,
+ IN UCHAR *pHashStr,
+ IN INT hashStrLen,
+ OUT PUCHAR pPMKBuf);
+
+
+
//
// Prototypes of function definition in cmm_info.c
//
IN UCHAR CipherAlg,
IN MAC_TABLE_ENTRY *pEntry);
-CHAR *GetEncryptType(
+PSTRING GetEncryptType(
CHAR enc);
-CHAR *GetAuthMode(
+PSTRING GetAuthMode(
CHAR auth);
-VOID RTMPIoctlGetSiteSurvey(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
+VOID RTMPSetHT(
+ IN PRTMP_ADAPTER pAd,
+ IN OID_SET_HT_PHYMODE *pHTPhyMode);
-VOID RTMPIoctlGetMacTable(
- IN PRTMP_ADAPTER pAd,
- IN struct iwreq *wrq);
-
-VOID RTMPIndicateWPA2Status(
- IN PRTMP_ADAPTER pAdapter);
-
-VOID RTMPOPModeSwitching(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPAddBSSIDCipher(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Aid,
- IN PNDIS_802_11_KEY pKey,
- IN UCHAR CipherAlg);
-
-VOID RTMPSetHT(
- IN PRTMP_ADAPTER pAd,
- IN OID_SET_HT_PHYMODE *pHTPhyMode);
-
-VOID RTMPSetIndividualHT(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR apidx);
+VOID RTMPSetIndividualHT(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR apidx);
VOID RTMPSendWirelessEvent(
IN PRTMP_ADAPTER pAd,
IN UCHAR BssIdx,
IN CHAR Rssi);
-VOID NICUpdateCntlCounters(
- IN PRTMP_ADAPTER pAd,
- IN PHEADER_802_11 pHeader,
- IN UCHAR SubType,
- IN PRXWI_STRUC pRxWI);
-//
-// prototype in wpa.c
-//
-BOOLEAN WpaMsgTypeSubst(
- IN UCHAR EAPType,
- OUT INT *MsgType);
-
-VOID WpaPskStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID WpaEAPOLKeyAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaPairMsg1Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaPairMsg3Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaGroupMsg1Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaMacHeaderInit(
- IN PRTMP_ADAPTER pAd,
- IN OUT PHEADER_802_11 pHdr80211,
- IN UCHAR wep,
- IN PUCHAR pAddr1);
-
-VOID Wpa2PairMsg1Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID Wpa2PairMsg3Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-BOOLEAN ParseKeyData(
+CHAR ConvertToRssi(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR pKeyData,
- IN UCHAR KeyDataLen,
- IN UCHAR bPairewise);
+ IN CHAR Rssi,
+ IN UCHAR RssiNumber);
+/*===================================
+ Function prototype in cmm_wpa.c
+ =================================== */
VOID RTMPToWirelessSta(
IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pEntry,
IN PUCHAR pHeader802_3,
IN UINT HdrLen,
IN PUCHAR pData,
IN UINT DataLen,
- IN BOOLEAN is4wayFrame);
-
-VOID HMAC_SHA1(
- IN UCHAR *text,
- IN UINT text_len,
- IN UCHAR *key,
- IN UINT key_len,
- IN UCHAR *digest);
-
-VOID PRF(
- IN UCHAR *key,
- IN INT key_len,
- IN UCHAR *prefix,
- IN INT prefix_len,
- IN UCHAR *data,
- IN INT data_len,
- OUT UCHAR *output,
- IN INT len);
-
-VOID CCKMPRF(
- IN UCHAR *key,
- IN INT key_len,
- IN UCHAR *data,
- IN INT data_len,
- OUT UCHAR *output,
- IN INT len);
+ IN BOOLEAN bClearFrame);
-VOID WpaCountPTK(
+VOID WpaDerivePTK(
IN PRTMP_ADAPTER pAd,
IN UCHAR *PMK,
IN UCHAR *ANonce,
IN UCHAR *macAddr,
OUT UCHAR *random);
-//
-// prototype in aironet.c
-//
-VOID AironetStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID AironetMsgAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID AironetRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ChannelLoadRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID NoiseHistRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID BeaconRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID AironetReportAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ChannelLoadReportAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID NoiseHistReportAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID AironetFinalReportAction(
- IN PRTMP_ADAPTER pAd);
-
-VOID BeaconReportAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID AironetAddBeaconReport(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Index,
- IN PMLME_QUEUE_ELEM pElem);
-
-VOID AironetCreateBeaconReportFromBssTable(
- IN PRTMP_ADAPTER pAd);
-
-VOID DBGPRINT_TX_RING(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx);
-
-VOID DBGPRINT_RX_RING(
- IN PRTMP_ADAPTER pAd);
-
-CHAR ConvertToRssi(
- IN PRTMP_ADAPTER pAd,
- IN CHAR Rssi,
- IN UCHAR RssiNumber);
-
-VOID APAsicEvaluateRxAnt(
- IN PRTMP_ADAPTER pAd);
-
-
-VOID APAsicRxAntEvalTimeout(
- IN PRTMP_ADAPTER pAd);
-
-//
-// function prototype in cmm_wpa.c
-//
BOOLEAN RTMPCheckWPAframe(
- IN PRTMP_ADAPTER pAd,
+ IN PRTMP_ADAPTER pAd,
IN PMAC_TABLE_ENTRY pEntry,
- IN PUCHAR pData,
- IN ULONG DataByteCount,
+ IN PUCHAR pData,
+ IN ULONG DataByteCount,
IN UCHAR FromWhichBSSID);
VOID AES_GTK_KEY_UNWRAP(
IN UCHAR *key,
OUT UCHAR *plaintext,
- IN UCHAR c_len,
+ IN UINT32 c_len,
IN UCHAR *ciphertext);
-BOOLEAN RTMPCheckRSNIE(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN UCHAR DataLen,
- IN MAC_TABLE_ENTRY *pEntry,
- OUT UCHAR *Offset);
-
BOOLEAN RTMPParseEapolKeyData(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pKeyData,
IN MAC_TABLE_ENTRY *pEntry);
VOID ConstructEapolMsg(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR PeerAuthMode,
- IN UCHAR PeerWepStatus,
- IN UCHAR MyGroupKeyWepStatus,
- IN UCHAR MsgType,
+ IN PMAC_TABLE_ENTRY pEntry,
+ IN UCHAR GroupKeyWepStatus,
+ IN UCHAR MsgType,
IN UCHAR DefaultKeyIdx,
- IN UCHAR *ReplayCounter,
- IN UCHAR *KeyNonce,
+ IN UCHAR *KeyNonce,
IN UCHAR *TxRSC,
- IN UCHAR *PTK,
IN UCHAR *GTK,
IN UCHAR *RSNIE,
IN UCHAR RSNIE_Len,
OUT PEAPOL_PACKET pMsg);
-VOID CalculateMIC(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR PeerWepStatus,
- IN UCHAR *PTK,
- OUT PEAPOL_PACKET pMsg);
-
NDIS_STATUS RTMPSoftDecryptBroadCastData(
- IN PRTMP_ADAPTER pAd,
+ IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk,
- IN NDIS_802_11_ENCRYPTION_STATUS GroupCipher,
+ IN NDIS_802_11_ENCRYPTION_STATUS GroupCipher,
IN PCIPHER_KEY pShard_key);
-VOID ConstructEapolKeyData(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR PeerAuthMode,
- IN UCHAR PeerWepStatus,
- IN UCHAR GroupKeyWepStatus,
- IN UCHAR MsgType,
- IN UCHAR DefaultKeyIdx,
- IN BOOLEAN bWPA2Capable,
- IN UCHAR *PTK,
- IN UCHAR *GTK,
- IN UCHAR *RSNIE,
- IN UCHAR RSNIE_LEN,
- OUT PEAPOL_PACKET pMsg);
-
VOID RTMPMakeRSNIE(
IN PRTMP_ADAPTER pAd,
IN UINT AuthMode,
//
// function prototype in ap_wpa.c
//
-
-BOOLEAN APWpaMsgTypeSubst(
- IN UCHAR EAPType,
- OUT INT *MsgType) ;
-
-MAC_TABLE_ENTRY *PACInquiry(
+VOID RTMPGetTxTscFromAsic(
IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid);
+ IN UCHAR apidx,
+ OUT PUCHAR pTxTsc);
-BOOLEAN RTMPCheckMcast(
- IN PRTMP_ADAPTER pAd,
- IN PEID_STRUCT eid_ptr,
- IN MAC_TABLE_ENTRY *pEntry);
+VOID APInstallPairwiseKey(
+ PRTMP_ADAPTER pAd,
+ PMAC_TABLE_ENTRY pEntry);
-BOOLEAN RTMPCheckUcast(
- IN PRTMP_ADAPTER pAd,
- IN PEID_STRUCT eid_ptr,
- IN MAC_TABLE_ENTRY *pEntry);
+UINT APValidateRSNIE(
+ IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pEntry,
+ IN PUCHAR pRsnIe,
+ IN UCHAR rsnie_len);
-BOOLEAN RTMPCheckAUTH(
- IN PRTMP_ADAPTER pAd,
- IN PEID_STRUCT eid_ptr,
+VOID HandleCounterMeasure(
+ IN PRTMP_ADAPTER pAd,
IN MAC_TABLE_ENTRY *pEntry);
VOID WPAStart4WayHS(
IN PRTMP_ADAPTER pAd,
IN MAC_TABLE_ENTRY *pEntry);
-VOID APWpaEAPPacketAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLStartAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLLogoffAction(
+VOID PeerPairMsg1Action(
IN PRTMP_ADAPTER pAd,
+ IN MAC_TABLE_ENTRY *pEntry,
IN MLME_QUEUE_ELEM *Elem);
-VOID APWpaEAPOLKeyAction(
- IN PRTMP_ADAPTER pAd,
+VOID PeerPairMsg2Action(
+ IN PRTMP_ADAPTER pAd,
+ IN MAC_TABLE_ENTRY *pEntry,
IN MLME_QUEUE_ELEM *Elem);
-VOID APWpaEAPOLASFAlertAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID HandleCounterMeasure(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry);
-
-VOID PeerPairMsg2Action(
- IN PRTMP_ADAPTER pAd,
+VOID PeerPairMsg3Action(
+ IN PRTMP_ADAPTER pAd,
IN MAC_TABLE_ENTRY *pEntry,
IN MLME_QUEUE_ELEM *Elem);
IN MAC_TABLE_ENTRY *pEntry,
IN MLME_QUEUE_ELEM *Elem);
-VOID CMTimerExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID WPARetryExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID EnqueueStartForPSKExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID RTMPHandleSTAKey(
- IN PRTMP_ADAPTER pAdapter,
- IN MAC_TABLE_ENTRY *pEntry,
- IN MLME_QUEUE_ELEM *Elem);
+VOID PeerGroupMsg1Action(
+ IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pEntry,
+ IN MLME_QUEUE_ELEM *Elem);
VOID PeerGroupMsg2Action(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
+ IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pEntry,
IN VOID *Msg,
IN UINT MsgLen);
-VOID PairDisAssocAction(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN USHORT Reason);
-
-VOID MlmeDeAuthAction(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN USHORT Reason);
-
-VOID GREKEYPeriodicExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID CountGTK(
+VOID WpaDeriveGTK(
IN UCHAR *PMK,
IN UCHAR *GNonce,
IN UCHAR *AA,
OUT UCHAR *output,
IN UINT len);
-VOID GetSmall(
- IN PVOID pSrc1,
- IN PVOID pSrc2,
- OUT PUCHAR out,
- IN ULONG Length);
-
-VOID GetLarge(
- IN PVOID pSrc1,
- IN PVOID pSrc2,
- OUT PUCHAR out,
- IN ULONG Length);
-
-VOID APGenRandom(
- IN PRTMP_ADAPTER pAd,
- OUT UCHAR *random);
-
VOID AES_GTK_KEY_WRAP(
IN UCHAR *key,
IN UCHAR *plaintext,
- IN UCHAR p_len,
+ IN UINT32 p_len,
OUT UCHAR *ciphertext);
-VOID WpaSend(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR pPacket,
- IN ULONG Len);
+//typedef void (*TIMER_FUNCTION)(unsigned long);
-VOID APToWirelessSta(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN UINT DataLen,
- IN BOOLEAN bClearFrame);
-
-VOID RTMPAddPMKIDCache(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN PUCHAR pAddr,
- IN UCHAR *PMKID,
- IN UCHAR *PMK);
-
-INT RTMPSearchPMKIDCache(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN PUCHAR pAddr);
-
-VOID RTMPDeletePMKIDCache(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN INT idx);
-
-VOID RTMPMaintainPMKIDCache(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPSendTriggerFrame(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuffer,
- IN ULONG Length,
- IN UCHAR TxRate,
- IN BOOLEAN bQosNull);
-
-#ifdef RT30xx
-VOID RTMPFilterCalibration(
- IN PRTMP_ADAPTER pAd);
-#endif // RT30xx //
/* timeout -- ms */
VOID RTMP_SetPeriodicTimer(
IN ULONG usec);
NDIS_STATUS os_alloc_mem(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR *mem,
+ IN RTMP_ADAPTER *pAd,
+ OUT UCHAR **mem,
IN ULONG size);
NDIS_STATUS os_free_mem(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR mem);
+ IN PVOID mem);
void RTMP_AllocateSharedMemory(
OUT PVOID *VirtualAddress,
OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
+void RTMP_FreeFirstTxBuffer(
+ IN PRTMP_ADAPTER pAd,
+ IN ULONG Length,
+ IN BOOLEAN Cached,
+ IN PVOID VirtualAddress,
+ IN NDIS_PHYSICAL_ADDRESS PhysicalAddress);
+
void RTMP_AllocateMgmtDescMemory(
IN PRTMP_ADAPTER pAd,
IN ULONG Length,
OUT PVOID *VirtualAddress,
OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
+void RTMP_FreeDescMemory(
+ IN PRTMP_ADAPTER pAd,
+ IN ULONG Length,
+ IN PVOID VirtualAddress,
+ IN NDIS_PHYSICAL_ADDRESS PhysicalAddress);
+
+PNDIS_PACKET RtmpOSNetPktAlloc(
+ IN RTMP_ADAPTER *pAd,
+ IN int size);
+
PNDIS_PACKET RTMP_AllocateRxPacketBuffer(
IN PRTMP_ADAPTER pAd,
IN ULONG Length,
IN PRTMP_ADAPTER pAd,
IN PNDIS_PACKET pPacket);
-
-UINT Handle_AMSDU_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-
-void convert_802_11_to_802_3_packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR p8023hdr,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-
PNET_DEV get_netdev_from_bssid(
IN PRTMP_ADAPTER pAd,
IN UCHAR FromWhichBSSID);
IN PRTMP_ADAPTER pAd,
IN PNDIS_PACKET pOldPkt);
-PNDIS_PACKET duplicate_pkt_with_VLAN(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-PNDIS_PACKET duplicate_pkt_with_WPI(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UINT32 ext_head_len,
- IN UINT32 ext_tail_len);
-
-UCHAR VLAN_8023_Header_Copy(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- OUT PUCHAR pData,
- IN UCHAR FromWhichBSSID);
-
void ba_flush_reordering_timeout_mpdus(
IN PRTMP_ADAPTER pAd,
IN PBA_REC_ENTRY pBAEntry,
BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-ULONG AutoChBssInsertEntry(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pBssid,
- IN CHAR Ssid[],
- IN UCHAR SsidLen,
- IN UCHAR ChannelNo,
- IN CHAR Rssi);
-
-void AutoChBssTableInit(
- IN PRTMP_ADAPTER pAd);
-void ChannelInfoInit(
- IN PRTMP_ADAPTER pAd);
-void AutoChBssTableDestroy(
- IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoDestroy(
- IN PRTMP_ADAPTER pAd);
-
-UCHAR New_ApAutoSelectChannel(
- IN PRTMP_ADAPTER pAd);
BOOLEAN rtstrmactohex(
- IN char *s1,
- IN char *s2);
+ IN PSTRING s1,
+ IN PSTRING s2);
BOOLEAN rtstrcasecmp(
- IN char *s1,
- IN char *s2);
+ IN PSTRING s1,
+ IN PSTRING s2);
-char *rtstrstruncasecmp(
- IN char *s1,
- IN char *s2);
+PSTRING rtstrstruncasecmp(
+ IN PSTRING s1,
+ IN PSTRING s2);
-char *rtstrstr(
- IN const char * s1,
- IN const char * s2);
+PSTRING rtstrstr(
+ IN const PSTRING s1,
+ IN const PSTRING s2);
-char *rstrtok(
- IN char * s,
- IN const char * ct);
+PSTRING rstrtok(
+ IN PSTRING s,
+ IN const PSTRING ct);
int rtinet_aton(
- const char *cp,
+ const PSTRING cp,
unsigned int *addr);
////////// common ioctl functions //////////
INT Set_DriverVersion_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_CountryRegion_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_CountryRegionABand_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_WirelessMode_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_Channel_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_ShortSlot_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_TxPower_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_BGProtection_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_TxPreamble_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_RTSThreshold_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_FragThreshold_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_TxBurst_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
#ifdef AGGREGATION_SUPPORT
INT Set_PktAggregate_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-#endif
+ IN PSTRING arg);
+#endif // AGGREGATION_SUPPORT //
INT Set_IEEE80211H_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
#ifdef DBG
INT Set_Debug_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
#endif
INT Show_DescInfo_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_ResetStatCounter_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_BASetup_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_BADecline_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_BAOriTearDown_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_BARecTearDown_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtBw_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtMcs_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtGi_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtOpMode_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtStbc_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtHtc_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtExtcha_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtMpduDensity_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtBaWinSize_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtRdg_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtLinkAdapt_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtAmsdu_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtAutoBa_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtProtect_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtMimoPs_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_ForceShortGI_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_ForceGF_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT SetCommonHT(
IN PRTMP_ADAPTER pAd);
INT Set_SendPSMPAction_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtMIMOPSmode_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
INT Set_HtTxBASize_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
+ IN PSTRING arg);
-//Dls , kathy
-VOID RTMPSendDLSTearDownFrame(
+INT Set_HtDisallowTKIP_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA);
-
-//Block ACK
-VOID QueryBATABLE(
- IN PRTMP_ADAPTER pAd,
- OUT PQUERYBA_TABLE pBAT);
+ IN PSTRING arg);
INT WpaCheckEapCode(
IN PRTMP_ADAPTER pAd,
IN PRTMP_ADAPTER pAd,
IN BOOLEAN bUnicast);
-VOID SendAssocIEsToWpaSupplicant(
- IN PRTMP_ADAPTER pAd);
-
int wext_notify_event_assoc(
IN RTMP_ADAPTER *pAd);
-VOID Handle_BSS_Width_Trigger_Events(
- IN PRTMP_ADAPTER pAd);
-
-void build_ext_channel_switch_ie(
- IN PRTMP_ADAPTER pAd,
- IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE);
-
-BOOLEAN APRxDoneInterruptHandle(
- IN PRTMP_ADAPTER pAd);
-
BOOLEAN STARxDoneInterruptHandle(
IN PRTMP_ADAPTER pAd,
IN BOOLEAN argc);
IN PUCHAR pHeader802_3,
IN UCHAR FromWhichBSSID);
-UINT deaggregate_AMSDU_announce(
- IN PRTMP_ADAPTER pAd,
- PNDIS_PACKET pPacket,
- IN PUCHAR pData,
- IN ULONG DataSize);
-
// remove LLC and get 802_3 Header
#define RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3) \
{ \
_pRxBlk->DataSize, _pRemovedLLCSNAP); \
}
-BOOLEAN APFowardWirelessStaToWirelessSta(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN ULONG FromWhichBSSID);
-
-VOID Announce_or_Forward_802_3_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UCHAR FromWhichBSSID);
-
VOID Sta_Announce_or_Forward_802_3_Packet(
IN PRTMP_ADAPTER pAd,
IN PNDIS_PACKET pPacket,
IN PRXWI_STRUC pRxWI);
PNDIS_PACKET GetPacketFromRxRing(
- IN PRTMP_ADAPTER pAd,
+ IN PRTMP_ADAPTER pAd,
OUT PRT28XX_RXD_STRUC pSaveRxD,
OUT BOOLEAN *pbReschedule,
IN OUT UINT32 *pRxPending);
IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk);
-////////////////////////////////////////
+////////////////////////////////////////
+
+VOID RTMPIoctlGetSiteSurvey(
+ IN PRTMP_ADAPTER pAdapter,
+ IN struct iwreq *wrq);
+
+
+
+
+
+
+
enum {
DIDmsg_lnxind_wlansniffrm = 0x00000044,
DIDmsg_lnxind_wlansniffrm_hosttime = 0x00010044,
IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk);
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
- IN struct net_device *net_dev);
-#endif
VOID RTMPSetDesiredRates(
IN PRTMP_ADAPTER pAdapter,
INT Set_FixedTxMode_Proc(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-static inline char* GetPhyMode(
- int Mode)
-{
- switch(Mode)
- {
- case MODE_CCK:
- return "CCK";
-
- case MODE_OFDM:
- return "OFDM";
- case MODE_HTMIX:
- return "HTMIX";
-
- case MODE_HTGREENFIELD:
- return "GREEN";
- default:
- return "N/A";
- }
-}
-
+ IN PSTRING arg);
-static inline char* GetBW(
- int BW)
-{
- switch(BW)
- {
- case BW_10:
- return "10M";
-
- case BW_20:
- return "20M";
- case BW_40:
- return "40M";
- default:
- return "N/A";
- }
-}
+INT Set_LongRetryLimit_Proc(
+ IN PRTMP_ADAPTER pAdapter,
+ IN PSTRING arg);
-VOID RT28xxThreadTerminate(
- IN RTMP_ADAPTER *pAd);
+INT Set_ShortRetryLimit_Proc(
+ IN PRTMP_ADAPTER pAdapter,
+ IN PSTRING arg);
BOOLEAN RT28XXChipsetCheck(
IN void *_dev_p);
-BOOLEAN RT28XXNetDevInit(
- IN void *_dev_p,
- IN struct net_device *net_dev,
- IN RTMP_ADAPTER *pAd);
-
-BOOLEAN RT28XXProbePostConfig(
- IN void *_dev_p,
- IN RTMP_ADAPTER *pAd,
- IN INT32 argc);
VOID RT28XXDMADisable(
IN RTMP_ADAPTER *pAd);
IN ULONG BeaconLen,
IN ULONG UpdatePos);
-INT rt28xx_ioctl(
- IN struct net_device *net_dev,
- IN OUT struct ifreq *rq,
- IN INT cmd);
-
-INT rt28xx_sta_ioctl(
- IN struct net_device *net_dev,
- IN OUT struct ifreq *rq,
- IN INT cmd);
+int rt28xx_init(
+ IN PRTMP_ADAPTER pAd,
+ IN PSTRING pDefaultMac,
+ IN PSTRING pHostName);
-BOOLEAN RT28XXSecurityKeyAdd(
- IN PRTMP_ADAPTER pAd,
- IN ULONG apidx,
- IN ULONG KeyIdx,
- IN MAC_TABLE_ENTRY *pEntry);
+NDIS_STATUS RtmpNetTaskInit(
+ IN RTMP_ADAPTER *pAd);
-////////////////////////////////////////
-PNDIS_PACKET GetPacketFromRxRing(
- IN PRTMP_ADAPTER pAd,
- OUT PRT28XX_RXD_STRUC pSaveRxD,
- OUT BOOLEAN *pbReschedule,
- IN OUT UINT32 *pRxPending);
+VOID RtmpNetTaskExit(
+ IN PRTMP_ADAPTER pAd);
+NDIS_STATUS RtmpMgmtTaskInit(
+ IN RTMP_ADAPTER *pAd);
-void kill_thread_task(PRTMP_ADAPTER pAd);
+VOID RtmpMgmtTaskExit(
+ IN RTMP_ADAPTER *pAd);
void tbtt_tasklet(unsigned long data);
-#ifdef RT2860
+
+PNET_DEV RtmpPhyNetDevInit(
+ IN RTMP_ADAPTER *pAd,
+ IN RTMP_OS_NETDEV_OP_HOOK *pNetHook);
+
+BOOLEAN RtmpPhyNetDevExit(
+ IN RTMP_ADAPTER *pAd,
+ IN PNET_DEV net_dev);
+
+INT RtmpRaDevCtrlInit(
+ IN RTMP_ADAPTER *pAd,
+ IN RTMP_INF_TYPE infType);
+
+BOOLEAN RtmpRaDevCtrlExit(
+ IN RTMP_ADAPTER *pAd);
+
+
+#ifdef RTMP_MAC_PCI
//
-// Function Prototype in cmm_data_2860.c
+// Function Prototype in cmm_data_pci.c
//
USHORT RtmpPCI_WriteTxResource(
IN PRTMP_ADAPTER pAd,
IN PRXWI_STRUC pRxWI,
IN PRT28XX_RXD_STRUC pRxD);
+BOOLEAN RT28xxPciAsicRadioOff(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Level,
+ IN USHORT TbttNumToNextWakeUp);
+
+BOOLEAN RT28xxPciAsicRadioOn(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Level);
+
+#ifdef RTMP_PCI_SUPPORT
VOID RTMPInitPCIeLinkCtrlValue(
IN PRTMP_ADAPTER pAd);
IN PRTMP_ADAPTER pAd,
IN USHORT Max);
-VOID RT28xxPciAsicRadioOff(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Level,
- IN USHORT TbttNumToNextWakeUp);
-
-BOOLEAN RT28xxPciAsicRadioOn(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Level);
-
-VOID RT28xxPciStaAsicForceWakeup(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Level);
-
-VOID RT28xxPciStaAsicSleepThenAutoWakeup(
- IN PRTMP_ADAPTER pAd,
- IN USHORT TbttNumToNextWakeUp);
-
VOID PsPollWakeExec(
IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
+#endif // RTMP_PCI_SUPPORT //
-VOID RT28xxPciMlmeRadioOn(
- IN PRTMP_ADAPTER pAd);
-
-VOID RT28xxPciMlmeRadioOFF(
- IN PRTMP_ADAPTER pAd);
-#endif /* RT2860 */
-
-VOID AsicTurnOffRFClk(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel);
-
-VOID AsicTurnOnRFClk(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel);
-
-#ifdef RT30xx
-NTSTATUS RT30xxWriteRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN UCHAR Value);
-
-NTSTATUS RT30xxReadRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN PUCHAR pValue);
-
-//2008/09/11:KH add to support efuse<--
-UCHAR eFuseReadRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-VOID eFuseReadPhysical(
- IN PRTMP_ADAPTER pAd,
- IN PUSHORT lpInBuffer,
- IN ULONG nInBufferSize,
- OUT PUSHORT lpOutBuffer,
- IN ULONG nOutBufferSize
-);
-
-NTSTATUS eFuseRead(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUCHAR pData,
- IN USHORT Length);
-
-VOID eFusePhysicalWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-NTSTATUS eFuseWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData);
-
-VOID eFuseWritePhysical(
- IN PRTMP_ADAPTER pAd,
- PUSHORT lpInBuffer,
- ULONG nInBufferSize,
- PUCHAR lpOutBuffer,
- ULONG nOutBufferSize
-);
-
-NTSTATUS eFuseWrite(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData,
- IN USHORT length);
-
-INT set_eFuseGetFreeBlockCount_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT set_eFusedump_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT set_eFuseLoadFromBin_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-NTSTATUS eFuseWriteRegistersFromBin(
+VOID RT28xxPciStaAsicForceWakeup(
IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData);
+ IN BOOLEAN bFromTx);
-VOID eFusePhysicalReadRegisters(
+VOID RT28xxPciStaAsicSleepThenAutoWakeup(
IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-NDIS_STATUS NICLoadEEPROM(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN bNeedLoadEEPROM(
- IN PRTMP_ADAPTER pAd);
-//2008/09/11:KH add to support efuse-->
-#endif // RT30xx //
+ IN USHORT TbttNumToNextWakeUp);
-#ifdef RT30xx
-// add by johnli, RF power sequence setup
-VOID RT30xxLoadRFNormalModeSetup(
- IN PRTMP_ADAPTER pAd);
-VOID RT30xxLoadRFSleepModeSetup(
+VOID RT28xxPciMlmeRadioOn(
IN PRTMP_ADAPTER pAd);
-VOID RT30xxReverseRFSleepModeSetup(
+VOID RT28xxPciMlmeRadioOFF(
IN PRTMP_ADAPTER pAd);
-// end johnli
-#endif // RT30xx //
+#endif // RTMP_MAC_PCI //
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
//
// Function Prototype in rtusb_bulk.c
//
IN PRTMP_ADAPTER pAd,
IN UINT32 Value);
-#ifndef RT30xx
-NTSTATUS RT30xxWriteRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN UCHAR Value);
-
-NTSTATUS RT30xxReadRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN PUCHAR pValue);
-#endif
-
NTSTATUS RTUSB_VendorRequest(
IN PRTMP_ADAPTER pAd,
IN UINT32 TransferFlags,
INT RTUSBCmdThread(
IN OUT PVOID Context);
-INT TimerQThread(
- IN OUT PVOID Context);
-
-RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
- IN RTMP_ADAPTER *pAd,
- IN RALINK_TIMER_STRUCT *pTimer);
-
-BOOLEAN RT2870_TimerQ_Remove(
- IN RTMP_ADAPTER *pAd,
- IN RALINK_TIMER_STRUCT *pTimer);
-
-void RT2870_TimerQ_Exit(
- IN RTMP_ADAPTER *pAd);
-
-void RT2870_TimerQ_Init(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconExit(
+VOID RTUSBBssBeaconExit(
IN RTMP_ADAPTER *pAd);
-VOID RT2870_BssBeaconStop(
+VOID RTUSBBssBeaconStop(
IN RTMP_ADAPTER *pAd);
-VOID RT2870_BssBeaconStart(
+VOID RTUSBBssBeaconStart(
IN RTMP_ADAPTER * pAd);
-VOID RT2870_BssBeaconInit(
+VOID RTUSBBssBeaconInit(
IN RTMP_ADAPTER *pAd);
-VOID RT2870_WatchDog(
+VOID RTUSBWatchDog(
IN RTMP_ADAPTER *pAd);
NTSTATUS RTUSBWriteMACRegister(
IN USHORT Offset,
IN USHORT Value);
-NTSTATUS RTUSBFirmwareRun(
- IN PRTMP_ADAPTER pAd);
-
NTSTATUS RTUSBFirmwareWrite(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pFwImage,
IN ULONG FwLen);
-NTSTATUS RTUSBFirmwareOpmode(
- IN PRTMP_ADAPTER pAd,
- OUT PUINT32 pValue);
-
NTSTATUS RTUSBVenderReset(
IN PRTMP_ADAPTER pAd);
IN PVOID pBuf);
VOID CMDHandler(
- IN PRTMP_ADAPTER pAd);
-
-
-NDIS_STATUS CreateThreads(
- IN struct net_device *net_dev );
+ IN PRTMP_ADAPTER pAd);
+NDIS_STATUS RTUSBWriteHWMACAddress(
+ IN PRTMP_ADAPTER pAdapter);
VOID MacTableInitialize(
IN PRTMP_ADAPTER pAd);
void append_pkt(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN ULONG DataSize,
+ IN PUCHAR pHeader802_3,
+ IN UINT HdrLen,
+ IN PUCHAR pData,
+ IN ULONG DataSize,
OUT PNDIS_PACKET *ppPacket);
UINT deaggregate_AMSDU_announce(
IN PRXWI_STRUC pRxWI,
IN PRT28XX_RXD_STRUC pRxINFO);
-
VOID RTUSBMlmeHardTransmit(
IN PRTMP_ADAPTER pAd,
IN PMGMT_STRUC pMgmt);
IN UCHAR TxBurst);
//
-// Function Prototype in cmm_data_2870.c
+// Function Prototype in cmm_data_usb.c
//
USHORT RtmpUSB_WriteSubTxResource(
IN PRTMP_ADAPTER pAd,
IN PRTMP_ADAPTER pAd,
IN TX_BLK *pTxBlk,
IN USHORT totalMPDUSize,
-#ifdef RT2860
- IN USHORT FirstTxIdx);
-#endif
IN USHORT TxIdx);
VOID RtmpUSBDataLastTxIdx(
IN UCHAR *pNullFrame,
IN UINT32 frameLen);
+VOID RtmpUsbStaAsicForceWakeupTimeout(
+ IN PVOID SystemSpecific1,
+ IN PVOID FunctionContext,
+ IN PVOID SystemSpecific2,
+ IN PVOID SystemSpecific3);
+
VOID RT28xxUsbStaAsicForceWakeup(
IN PRTMP_ADAPTER pAd,
IN BOOLEAN bFromTx);
VOID RT28xxUsbMlmeRadioOFF(
IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
+#endif // RTMP_MAC_USB //
+
+VOID AsicTurnOffRFClk(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Channel);
+
+VOID AsicTurnOnRFClk(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Channel);
-////////////////////////////////////////
-VOID QBSS_LoadInit(
- IN RTMP_ADAPTER *pAd);
-UINT32 QBSS_LoadElementAppend(
- IN RTMP_ADAPTER *pAd,
- OUT UINT8 *buf_p);
+#ifdef RTMP_TIMER_TASK_SUPPORT
+INT RtmpTimerQThread(
+ IN OUT PVOID Context);
+
+RTMP_TIMER_TASK_ENTRY *RtmpTimerQInsert(
+ IN RTMP_ADAPTER *pAd,
+ IN RALINK_TIMER_STRUCT *pTimer);
+
+BOOLEAN RtmpTimerQRemove(
+ IN RTMP_ADAPTER *pAd,
+ IN RALINK_TIMER_STRUCT *pTimer);
+
+void RtmpTimerQExit(
+ IN RTMP_ADAPTER *pAd);
-VOID QBSS_LoadUpdate(
- IN RTMP_ADAPTER *pAd);
+void RtmpTimerQInit(
+ IN RTMP_ADAPTER *pAd);
+#endif // RTMP_TIMER_TASK_SUPPORT //
///////////////////////////////////////
INT RTMPShowCfgValue(
IN PRTMP_ADAPTER pAd,
- IN PUCHAR pName,
- IN PUCHAR pBuf);
+ IN PSTRING pName,
+ IN PSTRING pBuf);
-PCHAR RTMPGetRalinkAuthModeStr(
+PSTRING RTMPGetRalinkAuthModeStr(
IN NDIS_802_11_AUTHENTICATION_MODE authMode);
-PCHAR RTMPGetRalinkEncryModeStr(
+PSTRING RTMPGetRalinkEncryModeStr(
IN USHORT encryMode);
//////////////////////////////////////
VOID AsicStaBbpTuning(
IN PRTMP_ADAPTER pAd);
-#ifdef RT2860
-VOID AsicResetFromDMABusy(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicResetBBP(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicResetMAC(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicResetPBF(
- IN PRTMP_ADAPTER pAd);
-#endif
-#ifdef RT2870
BOOLEAN StaAddMacTableEntry(
IN PRTMP_ADAPTER pAd,
IN PMAC_TABLE_ENTRY pEntry,
IN UCHAR MaxSupportedRateIn500Kbps,
IN HT_CAPABILITY_IE *pHtCapability,
IN UCHAR HtCapabilityLen,
+ IN ADD_HT_INFO_IE *pAddHtInfo,
+ IN UCHAR AddHtInfoLen,
IN USHORT CapabilityInfo);
-#endif
+
+
+BOOLEAN AUTH_ReqSend(
+ IN PRTMP_ADAPTER pAd,
+ IN PMLME_QUEUE_ELEM pElem,
+ IN PRALINK_TIMER_STRUCT pAuthTimer,
+ IN PSTRING pSMName,
+ IN USHORT SeqNo,
+ IN PUCHAR pNewElement,
+ IN ULONG ElementLen);
void RTMP_IndicateMediaState(
IN PRTMP_ADAPTER pAd);
int rt28xx_close(IN PNET_DEV dev);
int rt28xx_open(IN PNET_DEV dev);
+
+#define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
+#define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
+#define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
+
+
+#ifdef LINUX
__inline INT VIRTUAL_IF_UP(PRTMP_ADAPTER pAd)
{
-extern VOID MeshMakeBeacon(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-extern VOID MeshUpdateBeaconFrame(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (rt28xx_open(pAd->net_dev) != 0)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return -1;
}
+ }
else
{
}
rt28xx_close(pAd->net_dev);
return;
}
+#endif // LINUX //
+
+
+/*
+ OS Related funciton prototype definitions.
+ TODO: Maybe we need to move these function prototypes to other proper place.
+*/
+int RtmpOSWrielessEventSend(
+ IN RTMP_ADAPTER *pAd,
+ IN UINT32 eventType,
+ IN INT flags,
+ IN PUCHAR pSrcMac,
+ IN PUCHAR pData,
+ IN UINT32 dataLen);
+
+int RtmpOSNetDevAddrSet(
+ IN PNET_DEV pNetDev,
+ IN PUCHAR pMacAddr);
+
+int RtmpOSNetDevAttach(
+ IN PNET_DEV pNetDev,
+ IN RTMP_OS_NETDEV_OP_HOOK *pDevOpHook);
+
+void RtmpOSNetDevClose(
+ IN PNET_DEV pNetDev);
+
+void RtmpOSNetDevDetach(
+ IN PNET_DEV pNetDev);
+
+INT RtmpOSNetDevAlloc(
+ IN PNET_DEV *pNewNetDev,
+ IN UINT32 privDataSize);
+
+void RtmpOSNetDevFree(
+ IN PNET_DEV pNetDev);
+
+PNET_DEV RtmpOSNetDevGetByName(
+ IN PNET_DEV pNetDev,
+ IN PSTRING pDevName);
+
+void RtmpOSNetDeviceRefPut(
+ IN PNET_DEV pNetDev);
+
+PNET_DEV RtmpOSNetDevCreate(
+ IN RTMP_ADAPTER *pAd,
+ IN INT devType,
+ IN INT devNum,
+ IN INT privMemSize,
+ IN PSTRING pNamePrefix);
+
+/*
+ Task operation related function prototypes
+*/
+void RtmpOSTaskCustomize(
+ IN RTMP_OS_TASK *pTask);
+
+INT RtmpOSTaskNotifyToExit(
+ IN RTMP_OS_TASK *pTask);
+
+NDIS_STATUS RtmpOSTaskKill(
+ IN RTMP_OS_TASK *pTask);
+
+NDIS_STATUS RtmpOSTaskInit(
+ IN RTMP_OS_TASK *pTask,
+ PSTRING pTaskName,
+ VOID *pPriv);
+
+NDIS_STATUS RtmpOSTaskAttach(
+ IN RTMP_OS_TASK *pTask,
+ IN int (*fn)(void *),
+ IN void *arg);
+
+
+/*
+ File operation related function prototypes
+*/
+RTMP_OS_FD RtmpOSFileOpen(
+ IN char *pPath,
+ IN int flag,
+ IN int mode);
+
+int RtmpOSFileClose(
+ IN RTMP_OS_FD osfd);
+
+void RtmpOSFileSeek(
+ IN RTMP_OS_FD osfd,
+ IN int offset);
+
+int RtmpOSFileRead(
+ IN RTMP_OS_FD osfd,
+ IN char *pDataPtr,
+ IN int readLen);
+
+int RtmpOSFileWrite(
+ IN RTMP_OS_FD osfd,
+ IN char *pDataPtr,
+ IN int writeLen);
+
+void RtmpOSFSInfoChange(
+ IN RTMP_OS_FS_INFO *pOSFSInfo,
+ IN BOOLEAN bSet);
#endif // __RTMP_H__
projects / linux-2.6-block.git / blobdiff