drivers/serial/s3c2410.c: remove dead config symbols

[linux-2.6-block.git] / drivers / serial / s3c2410.c

diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 8dfc2dd058ca4ba74aee7f2467f890c04698c006..45de19366030f248dbda1e33d457e8c75cac7e93 100644 (file)
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -20,8 +20,8 @@
  *                  - S3C2410 and S3C2440 serial support
  *                  - Power Management support
  *                  - Fix console via IrDA devices
- *                  - SysReq (Herbert Pötzl)
- *                  - Break character handling (Herbert Pötzl)
+ *                  - SysReq (Herbert Pötzl)
+ *                  - Break character handling (Herbert Pötzl)
  *                  - spin-lock initialisation (Dimitry Andric)
  *                  - added clock control
  *                  - updated init code to use platform_device info
@@ -78,7 +78,7 @@
 
 #include <asm/hardware.h>
 
-#include <asm/arch/regs-serial.h>
+#include <asm/plat-s3c/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 
 /* structures */
@@ -738,8 +738,8 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
 }
 
 static void s3c24xx_serial_set_termios(struct uart_port *port,
-                                      struct termios *termios,
-                                      struct termios *old)
+                                      struct ktermios *termios,
+                                      struct ktermios *old)
 {
        struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
        struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -957,7 +957,7 @@ static struct uart_driver s3c24xx_uart_drv = {
 static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
        [0] = {
                .port = {
-                       .lock           = SPIN_LOCK_UNLOCKED,
+                       .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
                        .iotype         = UPIO_MEM,
                        .irq            = IRQ_S3CUART_RX0,
                        .uartclk        = 0,
@@ -969,7 +969,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
        },
        [1] = {
                .port = {
-                       .lock           = SPIN_LOCK_UNLOCKED,
+                       .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
                        .iotype         = UPIO_MEM,
                        .irq            = IRQ_S3CUART_RX1,
                        .uartclk        = 0,
@@ -983,7 +983,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
 
        [2] = {
                .port = {
-                       .lock           = SPIN_LOCK_UNLOCKED,
+                       .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
                        .iotype         = UPIO_MEM,
                        .irq            = IRQ_S3CUART_RX2,
                        .uartclk        = 0,
@@ -1527,7 +1527,7 @@ static inline void s3c2440_serial_exit(void)
 #define s3c2440_uart_inf_at NULL
 #endif /* CONFIG_CPU_S3C2440 */
 
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#if defined(CONFIG_CPU_S3C2412)
 
 static int s3c2412_serial_setsource(struct uart_port *port,
                                     struct s3c24xx_uart_clksrc *clk)