blackfin: serial driver

[linux-2.6-block.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e9d927e3b8e6cc8d2dd159457d72f2bd08d98f54..924e9bd757f0fe486e71f11796567c3cbf542d6d 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -508,6 +508,100 @@ config SERIAL_SA1100_CONSOLE
          your boot loader (lilo or loadlin) about how to pass options to the
          kernel at boot time.)
 
+config SERIAL_BFIN
+       tristate "Blackfin serial port support"
+       depends on BFIN
+       select SERIAL_CORE
+       select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
+       help
+         Add support for the built-in UARTs on the Blackfin.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bfin_5xx.
+
+config SERIAL_BFIN_CONSOLE
+       bool "Console on Blackfin serial port"
+       depends on SERIAL_BFIN
+       select SERIAL_CORE_CONSOLE
+
+choice
+       prompt "UART Mode"
+       depends on SERIAL_BFIN
+       default SERIAL_BFIN_DMA
+       help
+         This driver supports the built-in serial ports of the Blackfin family
+         of CPUs
+
+config SERIAL_BFIN_DMA
+       bool "DMA mode"
+       depends on DMA_UNCACHED_1M
+       help
+         This driver works under DMA mode. If this option is selected, the
+         blackfin simple dma driver is also enabled.
+
+config SERIAL_BFIN_PIO
+       bool "PIO mode"
+       help
+         This driver works under PIO mode.
+
+endchoice
+
+config SERIAL_BFIN_UART0
+       bool "Enable UART0"
+       depends on SERIAL_BFIN
+       help
+         Enable UART0
+
+config BFIN_UART0_CTSRTS
+       bool "Enable UART0 hardware flow control"
+       depends on SERIAL_BFIN_UART0
+       help
+         Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+         signal.
+
+config UART0_CTS_PIN
+       int "UART0 CTS pin"
+       depends on BFIN_UART0_CTSRTS
+       default 23
+       help
+         The default pin is GPIO_GP7.
+         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART0_RTS_PIN
+       int "UART0 RTS pin"
+       depends on BFIN_UART0_CTSRTS
+       default 22
+       help
+         The default pin is GPIO_GP6.
+         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config SERIAL_BFIN_UART1
+       bool "Enable UART1"
+       depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
+       help
+         Enable UART1
+
+config BFIN_UART1_CTSRTS
+       bool "Enable UART1 hardware flow control"
+       depends on SERIAL_BFIN_UART1
+       help
+         Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+         signal.
+
+config UART1_CTS_PIN
+       int "UART1 CTS pin"
+       depends on BFIN_UART1_CTSRTS
+       default -1
+       help
+         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART1_RTS_PIN
+       int "UART1 RTS pin"
+       depends on BFIN_UART1_CTSRTS
+       default -1
+       help
+         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
 config SERIAL_IMX
        bool "IMX serial port support"
        depends on ARM && ARCH_IMX