static int sr_probe(struct device *);
static int sr_remove(struct device *);
-static int sr_init_command(struct scsi_cmnd *);
+static int sr_done(struct scsi_cmnd *);
static struct scsi_driver sr_template = {
.owner = THIS_MODULE,
.probe = sr_probe,
.remove = sr_remove,
},
- .init_command = sr_init_command,
+ .done = sr_done,
};
static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
* an inode for that to work, and we do not always have one.
*/
-int sr_media_change(struct cdrom_device_info *cdi, int slot)
+static int sr_media_change(struct cdrom_device_info *cdi, int slot)
{
struct scsi_cd *cd = cdi->handle;
int retval;
+ struct scsi_sense_hdr *sshdr;
if (CDSL_CURRENT != slot) {
/* no changer support */
return -EINVAL;
}
- retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES);
- if (retval) {
- /* Unable to test, unit probably not ready. This usually
- * means there is no disc in the drive. Mark as changed,
- * and we will figure it out later once the drive is
- * available again. */
+ sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
+ retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES,
+ sshdr);
+ if (retval || (scsi_sense_valid(sshdr) &&
+ /* 0x3a is medium not present */
+ sshdr->asc == 0x3a)) {
+ /* Media not present or unable to test, unit probably not
+ * ready. This usually means there is no disc in the drive.
+ * Mark as changed, and we will figure it out later once
+ * the drive is available again.
+ */
cd->device->changed = 1;
- return 1; /* This will force a flush, if called from
- * check_disk_change */
+ /* This will force a flush, if called from check_disk_change */
+ retval = 1;
+ goto out;
};
retval = cd->device->changed;
if (retval) {
/* check multisession offset etc */
sr_cd_check(cdi);
-
get_sectorsize(cd);
}
+
+out:
+ /* Notify userspace, that media has changed. */
+ if (retval != cd->previous_state)
+ sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE,
+ GFP_KERNEL);
+ cd->previous_state = retval;
+ kfree(sshdr);
+
return retval;
}
/*
- * rw_intr is the interrupt routine for the device driver.
+ * sr_done is the interrupt routine for the device driver.
*
- * It will be notified on the end of a SCSI read / write, and will take on
+ * It will be notified on the end of a SCSI read / write, and will take one
* of several actions based on success or failure.
*/
-static void rw_intr(struct scsi_cmnd * SCpnt)
+static int sr_done(struct scsi_cmnd *SCpnt)
{
int result = SCpnt->result;
int this_count = SCpnt->request_bufflen;
}
}
- /*
- * This calls the generic completion function, now that we know
- * how many actual sectors finished, and how many sectors we need
- * to say have failed.
- */
- scsi_io_completion(SCpnt, good_bytes);
+ return good_bytes;
}
-static int sr_init_command(struct scsi_cmnd * SCpnt)
+static int sr_prep_fn(struct request_queue *q, struct request *rq)
{
int block=0, this_count, s_size, timeout = SR_TIMEOUT;
- struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
+ struct scsi_cd *cd;
+ struct scsi_cmnd *SCpnt;
+ struct scsi_device *sdp = q->queuedata;
+ int ret;
+
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type != REQ_TYPE_FS) {
+ ret = BLKPREP_KILL;
+ goto out;
+ }
+ ret = scsi_setup_fs_cmnd(sdp, rq);
+ if (ret != BLKPREP_OK)
+ goto out;
+ SCpnt = rq->special;
+ cd = scsi_cd(rq->rq_disk);
+
+ /* from here on until we're complete, any goto out
+ * is used for a killable error condition */
+ ret = BLKPREP_KILL;
SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n",
cd->disk->disk_name, block));
if (!cd->device || !scsi_device_online(cd->device)) {
SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- SCpnt->request->nr_sectors));
+ rq->nr_sectors));
SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
- return 0;
+ goto out;
}
if (cd->device->changed) {
* quietly refuse to do anything to a changed disc until the
* changed bit has been reset
*/
- return 0;
+ goto out;
}
/*
if (s_size != 512 && s_size != 1024 && s_size != 2048) {
scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size);
- return 0;
+ goto out;
}
- if (rq_data_dir(SCpnt->request) == WRITE) {
+ if (rq_data_dir(rq) == WRITE) {
if (!cd->device->writeable)
- return 0;
+ goto out;
SCpnt->cmnd[0] = WRITE_10;
SCpnt->sc_data_direction = DMA_TO_DEVICE;
cd->cdi.media_written = 1;
- } else if (rq_data_dir(SCpnt->request) == READ) {
+ } else if (rq_data_dir(rq) == READ) {
SCpnt->cmnd[0] = READ_10;
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
- blk_dump_rq_flags(SCpnt->request, "Unknown sr command");
- return 0;
+ blk_dump_rq_flags(rq, "Unknown sr command");
+ goto out;
}
{
/*
* request doesn't start on hw block boundary, add scatter pads
*/
- if (((unsigned int)SCpnt->request->sector % (s_size >> 9)) ||
+ if (((unsigned int)rq->sector % (s_size >> 9)) ||
(SCpnt->request_bufflen % s_size)) {
scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
- return 0;
+ goto out;
}
this_count = (SCpnt->request_bufflen >> 9) / (s_size >> 9);
SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
cd->cdi.name,
- (rq_data_dir(SCpnt->request) == WRITE) ?
+ (rq_data_dir(rq) == WRITE) ?
"writing" : "reading",
- this_count, SCpnt->request->nr_sectors));
+ this_count, rq->nr_sectors));
SCpnt->cmnd[1] = 0;
- block = (unsigned int)SCpnt->request->sector / (s_size >> 9);
+ block = (unsigned int)rq->sector / (s_size >> 9);
if (this_count > 0xffff) {
this_count = 0xffff;
SCpnt->allowed = MAX_RETRIES;
SCpnt->timeout_per_command = timeout;
- /*
- * This is the completion routine we use. This is matched in terms
- * of capability to this function.
- */
- SCpnt->done = rw_intr;
-
/*
* This indicates that the command is ready from our end to be
* queued.
*/
- return 1;
+ ret = BLKPREP_OK;
+ out:
+ return scsi_prep_return(q, rq, ret);
}
static int sr_block_open(struct inode *inode, struct file *file)
/* FIXME: need to handle a get_capabilities failure properly ?? */
get_capabilities(cd);
+ blk_queue_prep_rq(sdev->request_queue, sr_prep_fn);
sr_vendor_init(cd);
disk->driverfs_dev = &sdev->sdev_gendev;
unsigned char *buffer;
int the_result, retries = 3;
int sector_size;
- request_queue_t *queue;
+ struct request_queue *queue;
buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
if (!buffer)
rc = register_blkdev(SCSI_CDROM_MAJOR, "sr");
if (rc)
return rc;
- return scsi_register_driver(&sr_template.gendrv);
+ rc = scsi_register_driver(&sr_template.gendrv);
+ if (rc)
+ unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
+
+ return rc;
}
static void __exit exit_sr(void)
projects / linux-2.6-block.git / blobdiff