MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to report for target devices.");
-int ql2xqfulltracking = 1;
-module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xqfulltracking,
- "Controls whether the driver tracks queue full status "
- "returns and dynamically adjusts a scsi device's queue "
- "depth. Default is 1, perform tracking. Set to 0 to "
- "disable dynamic tracking and adjustment of queue depth.");
-
-int ql2xqfullrampup = 120;
-module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xqfullrampup,
- "Number of seconds to wait to begin to ramp-up the queue "
- "depth for a device after a queue-full condition has been "
- "detected. Default is 120 seconds.");
-
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xiidmaenable,
srb_t *sp;
int rval;
- if (unlikely(pci_channel_offline(ha->pdev))) {
- if (ha->pdev->error_state == pci_channel_io_frozen)
- cmd->result = DID_REQUEUE << 16;
- else
+ if (ha->flags.eeh_busy) {
+ if (ha->flags.pci_channel_io_perm_failure)
cmd->result = DID_NO_CONNECT << 16;
+ else
+ cmd->result = DID_REQUEUE << 16;
goto qc24_fail_command;
}
#define ABORT_POLLING_PERIOD 1000
#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
+ scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+ struct qla_hw_data *ha = vha->hw;
int ret = QLA_SUCCESS;
+ if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+ return ret;
+ }
+
while (CMD_SP(cmd) && wait_iter--) {
msleep(ABORT_POLLING_PERIOD);
}
sdev->hostdata = NULL;
}
+static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth)
+{
+ fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
+
+ if (!scsi_track_queue_full(sdev, qdepth))
+ return;
+
+ DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw,
+ "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
+ fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
+ sdev->queue_depth));
+}
+
+static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth)
+{
+ fc_port_t *fcport = sdev->hostdata;
+ struct scsi_qla_host *vha = fcport->vha;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = NULL;
+
+ req = vha->req;
+ if (!req)
+ return;
+
+ if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth)
+ return;
+
+ if (sdev->ordered_tags)
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth);
+ else
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth);
+
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
+ fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
+ sdev->queue_depth));
+}
+
static int
qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
+ switch (reason) {
+ case SCSI_QDEPTH_DEFAULT:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ break;
+ case SCSI_QDEPTH_QFULL:
+ qla2x00_handle_queue_full(sdev, qdepth);
+ break;
+ case SCSI_QDEPTH_RAMP_UP:
+ qla2x00_adjust_sdev_qdepth_up(sdev, qdepth);
+ break;
+ default:
+ return EOPNOTSUPP;
+ }
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
return sdev->queue_depth;
}
/* Set ISP-type information. */
qla2x00_set_isp_flags(ha);
+
+ /* Set EEH reset type to fundamental if required by hba */
+ if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
+ pdev->needs_freset = 1;
+ pci_save_state(pdev);
+ }
+
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
if (ret)
DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
base_vha->host_no, ha));
- base_vha->flags.init_done = 1;
- base_vha->flags.online = 1;
-
ret = scsi_add_host(host, &pdev->dev);
if (ret)
goto probe_failed;
+ base_vha->flags.init_done = 1;
+ base_vha->flags.online = 1;
+
ha->isp_ops->enable_intrs(ha);
scsi_scan_host(host);
{
struct qla_hw_data *ha = vha->hw;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
+
+ /* Disable timer */
+ if (vha->timer_active)
+ qla2x00_stop_timer(vha);
+
+ /* Kill the kernel thread for this host */
+ if (ha->dpc_thread) {
+ struct task_struct *t = ha->dpc_thread;
+
+ /*
+ * qla2xxx_wake_dpc checks for ->dpc_thread
+ * so we need to zero it out.
+ */
+ ha->dpc_thread = NULL;
+ kthread_stop(t);
+ }
+
qla25xx_delete_queues(vha);
if (ha->flags.fce_enabled)
/* Stop currently executing firmware. */
qla2x00_try_to_stop_firmware(vha);
+ vha->flags.online = 0;
+
/* turn-off interrupts on the card */
if (ha->interrupts_on)
ha->isp_ops->disable_intrs(ha);
if (!base_vha->flags.init_done)
continue;
+ if (ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "qla2x00_do_dpc: dpc_flags: %lx\n",
+ base_vha->dpc_flags));
+ continue;
+ }
+
DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
ha->dpc_active = 1;
int index;
srb_t *sp;
int t;
+ uint16_t w;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
+
+ /* Hardware read to raise pending EEH errors during mailbox waits. */
+ if (!pci_channel_offline(ha->pdev))
+ pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
/*
* Ports - Port down timer.
*
static pci_ers_result_t
qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
- scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
+ scsi_qla_host_t *vha = pci_get_drvdata(pdev);
+ struct qla_hw_data *ha = vha->hw;
+
+ DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
+ state));
switch (state) {
case pci_channel_io_normal:
+ ha->flags.eeh_busy = 0;
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
+ ha->flags.eeh_busy = 1;
pci_disable_device(pdev);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
- qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
+ ha->flags.pci_channel_io_perm_failure = 1;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_NEED_RESET;
struct qla_hw_data *ha = base_vha->hw;
int rc;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+
if (ha->mem_only)
rc = pci_enable_device_mem(pdev);
else
if (rc) {
qla_printk(KERN_WARNING, ha,
"Can't re-enable PCI device after reset.\n");
-
return ret;
}
- pci_set_master(pdev);
if (ha->isp_ops->pci_config(base_vha))
return ret;
+#ifdef QL_DEBUG_LEVEL_17
+ {
+ uint8_t b;
+ uint32_t i;
+
+ printk("slot_reset_1: ");
+ for (i = 0; i < 256; i++) {
+ pci_read_config_byte(ha->pdev, i, &b);
+ printk("%s%02x", (i%16) ? " " : "\n", b);
+ }
+ printk("\n");
+ }
+#endif
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
ret = PCI_ERS_RESULT_RECOVERED;
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "slot_reset-return:ret=%x\n", ret));
+
return ret;
}
struct qla_hw_data *ha = base_vha->hw;
int ret;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+
ret = qla2x00_wait_for_hba_online(base_vha);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"the device failed to resume I/O "
"from slot/link_reset");
}
+
+ ha->flags.eeh_busy = 0;
+
pci_cleanup_aer_uncorrect_error_status(pdev);
}
projects / linux-2.6-block.git / blobdiff