[SCSI] drivers/scsi: Use ARRAY_SIZE macro

[linux-block.git] / drivers / scsi / fdomain.c

diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 4ba6a15cf43d2afb6715607174a843ccb6b7d9e6..e16013f0ad6ee6570833ee1df7f5bcb82aa2e08a 100644 (file)
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -420,10 +420,10 @@ static unsigned long addresses[] = {
    0xd0000,
    0xe0000,
 };
-#define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned ))
-                      
+#define ADDRESS_COUNT ARRAY_SIZE(addresses)
+
 static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 };
-#define PORT_COUNT (sizeof( ports ) / sizeof( unsigned short ))
+#define PORT_COUNT ARRAY_SIZE(ports)
 
 static unsigned short ints[] = { 3, 5, 10, 11, 12, 14, 15, 0 };
 
@@ -502,7 +502,7 @@ static struct signature {
     geometry location are verified). */
 };
 
-#define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature ))
+#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
 
 static void print_banner( struct Scsi_Host *shpnt )
 {
@@ -519,7 +519,7 @@ static void print_banner( struct Scsi_Host *shpnt )
 
       if (bios_minor >= 0) printk("%d", bios_minor);
       else                 printk("?.");
-   
+
       printk( " at 0x%lx using scsi id %d\n",
              bios_base, shpnt->this_id );
    }
@@ -570,7 +570,7 @@ static void do_pause(unsigned amount)       /* Pause for amount*10 milliseconds */
        mdelay(10*amount);
 }
 
-inline static void fdomain_make_bus_idle( void )
+static inline void fdomain_make_bus_idle( void )
 {
    outb(0, port_base + SCSI_Cntl);
    outb(0, port_base + SCSI_Mode_Cntl);
@@ -938,7 +938,6 @@ struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
    }
    shpnt->irq = interrupt_level;
    shpnt->io_port = port_base;
-   scsi_set_device(shpnt, &pdev->dev);
    shpnt->n_io_port = 0x10;
    print_banner( shpnt );
 
@@ -1155,7 +1154,7 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id,
       outb(0x40 | FIFO_COUNT, port_base + Interrupt_Cntl);
 
       outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */
-      outb(adapter_mask | (1 << current_SC->device->id), port_base + SCSI_Data_NoACK);
+      outb(adapter_mask | (1 << scmd_id(current_SC)), port_base + SCSI_Data_NoACK);
       
       /* Stop arbitration and enable parity */
       outb(0x10 | PARITY_MASK, port_base + TMC_Cntl);
@@ -1167,7 +1166,7 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id,
       status = inb(port_base + SCSI_Status);
       if (!(status & 0x01)) {
         /* Try again, for slow devices */
-        if (fdomain_select( current_SC->device->id )) {
+        if (fdomain_select( scmd_id(current_SC) )) {
 #if EVERY_ACCESS
            printk( " SFAIL " );
 #endif