* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
+#define KMSG_COMPONENT "tape"
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <asm/ebcdic.h>
#define TAPE_DBF_AREA tape_3590_dbf
+#define BUFSIZE 512 /* size of buffers for dynamic generated messages */
#include "tape.h"
#include "tape_std.h"
* - Read Alternate: implemented
*******************************************************************/
-#define PRINTK_HEADER "TAPE_3590: "
+#define KMSG_COMPONENT "tape"
static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = {
[0x00] = "",
struct req_iterator iter;
DBF_EVENT(6, "xBREDid:");
- start_block = req->sector >> TAPEBLOCK_HSEC_S2B;
+ start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block);
rq_for_each_segment(bv, req, iter)
ccw++;
dst += TAPEBLOCK_HSEC_SIZE;
}
- if (off > bv->bv_len)
- BUG();
+ BUG_ON(off > bv->bv_len);
}
ccw = tape_ccw_end(ccw, NOP, 0, NULL);
DBF_EVENT(6, "xBREDccwg\n");
}
c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK;
if (sense->flags & MSENSE_CRYPT_MASK) {
- PRINT_INFO("Medium is encrypted (%04x)\n", sense->flags);
+ DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags);
c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK;
} else {
DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags);
tape_3590_schedule_work(device, TO_READ_ATTMSG);
} else {
DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
- PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
- tape_dump_sense(device, NULL, irb);
+ tape_dump_sense_dbf(device, NULL, irb);
}
/* check medium state */
tape_3590_schedule_work(device, TO_MSEN);
case SENSE_BRA_DRE:
return tape_3590_erp_failed(device, request, irb, rc);
default:
- PRINT_ERR("Unknown BRA %x - This should not happen!\n",
- sense->bra);
BUG();
return TAPE_IO_STOP;
}
* should proceed with the new tape... this
* should probably be done in user space!
*/
- PRINT_WARN("(%s): Swap Tape Device!\n", dev_name(&device->cdev->dev));
+ dev_warn (&device->cdev->dev, "The tape medium must be loaded into a "
+ "different tape unit\n");
return tape_3590_erp_basic(device, request, irb, -EIO);
}
return tape_3590_erp_failed(device, request, irb, -EIO);
break;
default:
- PRINT_WARN("read_opposite_recovery_called_with_op: %s\n",
- tape_op_verbose[request->op]);
return tape_3590_erp_failed(device, request, irb, -EIO);
}
}
tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
+ char *exception, *service;
+
+ exception = kmalloc(BUFSIZE, GFP_ATOMIC);
+ service = kmalloc(BUFSIZE, GFP_ATOMIC);
+
+ if (!exception || !service)
+ goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f70.emc) {
case 0x02:
- PRINT_WARN("(%s): Data degraded\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Data degraded");
break;
case 0x03:
- PRINT_WARN("(%s): Data degraded in partion %i\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.mp);
+ snprintf(exception, BUFSIZE, "Data degraded in partion %i",
+ sense->fmt.f70.mp);
break;
case 0x04:
- PRINT_WARN("(%s): Medium degraded\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Medium degraded");
break;
case 0x05:
- PRINT_WARN("(%s): Medium degraded in partition %i\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.mp);
+ snprintf(exception, BUFSIZE, "Medium degraded in partition %i",
+ sense->fmt.f70.mp);
break;
case 0x06:
- PRINT_WARN("(%s): Block 0 Error\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Block 0 Error");
break;
case 0x07:
- PRINT_WARN("(%s): Medium Exception 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.md);
+ snprintf(exception, BUFSIZE, "Medium Exception 0x%02x",
+ sense->fmt.f70.md);
break;
default:
- PRINT_WARN("(%s): MIM ExMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.emc);
+ snprintf(exception, BUFSIZE, "0x%02x",
+ sense->fmt.f70.emc);
break;
}
/* Service Message */
switch (sense->fmt.f70.smc) {
case 0x02:
- PRINT_WARN("(%s): Reference Media maintenance procedure %i\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.md);
+ snprintf(service, BUFSIZE, "Reference Media maintenance "
+ "procedure %i", sense->fmt.f70.md);
break;
default:
- PRINT_WARN("(%s): MIM ServiceMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.smc);
+ snprintf(service, BUFSIZE, "0x%02x",
+ sense->fmt.f70.smc);
break;
}
+
+ dev_warn (&device->cdev->dev, "Tape media information: exception %s, "
+ "service %s\n", exception, service);
+
+out_nomem:
+ kfree(exception);
+ kfree(service);
}
/*
tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
+ char *exception, *service;
+
+ exception = kmalloc(BUFSIZE, GFP_ATOMIC);
+ service = kmalloc(BUFSIZE, GFP_ATOMIC);
+
+ if (!exception || !service)
+ goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f71.emc) {
case 0x01:
- PRINT_WARN("(%s): Effect of failure is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Effect of failure is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): CU Exception - no performance impact\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "CU Exception - no performance "
+ "impact");
break;
case 0x03:
- PRINT_WARN("(%s): CU Exception on channel interface 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on channel "
+ "interface 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x04:
- PRINT_WARN("(%s): CU Exception on device path 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on device path "
+ "0x%02x", sense->fmt.f71.md[0]);
break;
case 0x05:
- PRINT_WARN("(%s): CU Exception on library path 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on library path "
+ "0x%02x", sense->fmt.f71.md[0]);
break;
case 0x06:
- PRINT_WARN("(%s): CU Exception on node 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x",
+ sense->fmt.f71.md[0]);
break;
case 0x07:
- PRINT_WARN("(%s): CU Exception on partition 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on partition "
+ "0x%02x", sense->fmt.f71.md[0]);
break;
default:
- PRINT_WARN("(%s): SIM ExMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.emc);
+ snprintf(exception, BUFSIZE, "0x%02x",
+ sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
- PRINT_WARN("(%s): Repair impact is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair impact is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): Repair will not impact cu performance\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will not impact cu "
+ "performance");
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable node "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable node "
+ "0x%x on CU", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable nodes "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1],
+ sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable cannel path "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "channel path 0x%x on CU",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable cannel paths "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable cannel"
+ " paths (0x%x-0x%x) on CU",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable device path "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable device"
+ " path 0x%x on CU", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable device paths "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable device"
+ " paths (0x%x-0x%x) on CU",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x06:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable library path "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "library path 0x%x on CU",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable library paths "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "library paths (0x%x-0x%x) on CU",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
- PRINT_WARN("(%s): Repair will disable access to CU\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will disable access to CU");
break;
default:
- PRINT_WARN("(%s): SIM ServiceMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.smc);
+ snprintf(service, BUFSIZE, "0x%02x",
+ sense->fmt.f71.smc);
}
+
+ dev_warn (&device->cdev->dev, "I/O subsystem information: exception"
+ " %s, service %s\n", exception, service);
+out_nomem:
+ kfree(exception);
+ kfree(service);
}
/*
tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
+ char *exception, *service;
+
+ exception = kmalloc(BUFSIZE, GFP_ATOMIC);
+ service = kmalloc(BUFSIZE, GFP_ATOMIC);
+
+ if (!exception || !service)
+ goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f71.emc) {
case 0x01:
- PRINT_WARN("(%s): Effect of failure is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Effect of failure is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): DV Exception - no performance impact\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "DV Exception - no performance"
+ " impact");
break;
case 0x03:
- PRINT_WARN("(%s): DV Exception on channel interface 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "DV Exception on channel "
+ "interface 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x04:
- PRINT_WARN("(%s): DV Exception on loader 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x",
+ sense->fmt.f71.md[0]);
break;
case 0x05:
- PRINT_WARN("(%s): DV Exception on message display 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "DV Exception on message display"
+ " 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x06:
- PRINT_WARN("(%s): DV Exception in tape path\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "DV Exception in tape path");
break;
case 0x07:
- PRINT_WARN("(%s): DV Exception in drive\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "DV Exception in drive");
break;
default:
- PRINT_WARN("(%s): DSIM ExMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.emc);
+ snprintf(exception, BUFSIZE, "0x%02x",
+ sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
- PRINT_WARN("(%s): Repair impact is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair impact is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): Repair will not impact device performance\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will not impact device "
+ "performance");
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable channel path "
- "0x%x on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "channel path 0x%x on DV",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable channel path "
- "(0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "channel path (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable interface 0x%x "
- "on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "interface 0x%x on DV", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable interfaces "
- "(0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "interfaces (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable loader 0x%x "
- "on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable loader"
+ " 0x%x on DV", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable loader "
- "(0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable loader"
+ " (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
- PRINT_WARN("(%s): Repair will disable access to DV\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will disable access to DV");
break;
case 0x08:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable message "
- "display 0x%x on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "message display 0x%x on DV",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable message "
- "displays (0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "message displays (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x09:
- PRINT_WARN("(%s): Clean DV\n", dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Clean DV");
break;
default:
- PRINT_WARN("(%s): DSIM ServiceMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.smc);
+ snprintf(service, BUFSIZE, "0x%02x",
+ sense->fmt.f71.smc);
}
+
+ dev_warn (&device->cdev->dev, "Device subsystem information: exception"
+ " %s, service %s\n", exception, service);
+out_nomem:
+ kfree(exception);
+ kfree(service);
}
/*
return;
if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) {
if (tape_3590_msg[sense->mc] != NULL)
- PRINT_WARN("(%s): %s\n", dev_name(&device->cdev->dev),
- tape_3590_msg[sense->mc]);
- else {
- PRINT_WARN("(%s): Message Code 0x%x\n",
- dev_name(&device->cdev->dev), sense->mc);
- }
+ dev_warn (&device->cdev->dev, "The tape unit has "
+ "issued sense message %s\n",
+ tape_3590_msg[sense->mc]);
+ else
+ dev_warn (&device->cdev->dev, "The tape unit has "
+ "issued an unknown sense message code 0x%x\n",
+ sense->mc);
return;
}
if (sense->mc == 0xf0) {
/* Standard Media Information Message */
- PRINT_WARN("(%s): MIM SEV=%i, MC=%02x, ES=%x/%x, "
- "RC=%02x-%04x-%02x\n", dev_name(&device->cdev->dev),
- sense->fmt.f70.sev, sense->mc,
- sense->fmt.f70.emc, sense->fmt.f70.smc,
- sense->fmt.f70.refcode, sense->fmt.f70.mid,
- sense->fmt.f70.fid);
+ dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
+ "RC=%02x-%04x-%02x\n", sense->fmt.f70.sev, sense->mc,
+ sense->fmt.f70.emc, sense->fmt.f70.smc,
+ sense->fmt.f70.refcode, sense->fmt.f70.mid,
+ sense->fmt.f70.fid);
tape_3590_print_mim_msg_f0(device, irb);
return;
}
if (sense->mc == 0xf1) {
/* Standard I/O Subsystem Service Information Message */
- PRINT_WARN("(%s): IOSIM SEV=%i, DEVTYPE=3590/%02x, "
- "MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.sev,
- device->cdev->id.dev_model,
- sense->mc, sense->fmt.f71.emc,
- sense->fmt.f71.smc, sense->fmt.f71.refcode1,
- sense->fmt.f71.refcode2, sense->fmt.f71.refcode3);
+ dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
+ " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
+ sense->fmt.f71.sev, device->cdev->id.dev_model,
+ sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
+ sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
+ sense->fmt.f71.refcode3);
tape_3590_print_io_sim_msg_f1(device, irb);
return;
}
if (sense->mc == 0xf2) {
/* Standard Device Service Information Message */
- PRINT_WARN("(%s): DEVSIM SEV=%i, DEVTYPE=3590/%02x, "
- "MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.sev,
- device->cdev->id.dev_model,
- sense->mc, sense->fmt.f71.emc,
- sense->fmt.f71.smc, sense->fmt.f71.refcode1,
- sense->fmt.f71.refcode2, sense->fmt.f71.refcode3);
+ dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
+ ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
+ sense->fmt.f71.sev, device->cdev->id.dev_model,
+ sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
+ sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
+ sense->fmt.f71.refcode3);
tape_3590_print_dev_sim_msg_f2(device, irb);
return;
}
/* Standard Library Service Information Message */
return;
}
- PRINT_WARN("(%s): Device Message(%x)\n",
- dev_name(&device->cdev->dev), sense->mc);
+ dev_warn (&device->cdev->dev, "The tape unit has issued an unknown "
+ "sense message code %x\n", sense->mc);
}
static int tape_3590_crypt_error(struct tape_device *device,
/* No connection to EKM */
return tape_3590_erp_basic(device, request, irb, -ENOTCONN);
- PRINT_ERR("(%s): Unable to get encryption key from EKM\n", bus_id);
- PRINT_ERR("(%s): CU=%02X DRIVE=%06X EKM=%02X:%04X\n", bus_id, cu_rc,
- drv_rc, ekm_rc1, ekm_rc2);
+ dev_err (&device->cdev->dev, "The tape unit failed to obtain the "
+ "encryption key from EKM\n");
return tape_3590_erp_basic(device, request, irb, -ENOKEY);
}
* print additional msg since default msg
* "device intervention" is not very meaningfull
*/
- PRINT_WARN("(%s): Tape operation when medium not loaded\n",
- dev_name(&device->cdev->dev));
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
case 0x6020:
- PRINT_WARN("(%s): Cartridge of wrong type ?\n",
- dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
case 0x8011:
- PRINT_WARN("(%s): Another host has reserved the tape device\n",
- dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EPERM);
case 0x8013:
- PRINT_WARN("(%s): Another host has privileged access to the "
- "tape device\n", dev_name(&device->cdev->dev));
- PRINT_WARN("(%s): To solve the problem unload the current "
- "cartridge!\n", dev_name(&device->cdev->dev));
+ dev_warn (&device->cdev->dev, "A different host has privileged"
+ " access to the tape unit\n");
return tape_3590_erp_basic(device, request, irb, -EPERM);
default:
return tape_3590_erp_basic(device, request, irb, -EIO);
}
DBF_EVENT(6, "xunknownirq\n");
- PRINT_ERR("Unexpected interrupt.\n");
- PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]);
- tape_dump_sense(device, request, irb);
+ tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_STOP;
}
if (rc)
goto fail_rdc_data;
if (rdc_data->data[31] == 0x13) {
- PRINT_INFO("Device has crypto support\n");
data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK;
tape_3592_disable_crypt(device);
} else {
&tape_discipline_3590);
}
-static int
-tape_3590_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_3590_driver = {
.name = "tape_3590",
.owner = THIS_MODULE,
.ids = tape_3590_ids,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
- .set_offline = tape_3590_offline,
+ .set_offline = tape_generic_offline,
.set_online = tape_3590_online,
};
projects / linux-2.6-block.git / blobdiff