if RTC_CLASS
+if GEN_RTC || RTC
+comment "Conflicting RTC option has been selected, check GEN_RTC and RTC"
+endif
+
config RTC_HCTOSYS
bool "Set system time from RTC on startup and resume"
depends on RTC_CLASS = y
help
The RTC device that will be used to (re)initialize the system
clock, usually rtc0. Initialization is done when the system
- starts up, and when it resumes from a low power state.
+ starts up, and when it resumes from a low power state. This
+ device should record time in UTC, since the kernel won't do
+ timezone correction.
The driver for this RTC device must be loaded before late_initcall
functions run, so it must usually be statically linked.
If the clock you specify here is not battery backed, it may still
be useful to reinitialize system time when resuming from system
- sleep states. Do not specify an RTC here unless it stays powered
+ sleep states. Do not specify an RTC here unless it stays powered
during all this system's supported sleep states.
config RTC_DEBUG
The first seven registers on these chips hold an RTC, and other
registers may add features such as NVRAM, a trickle charger for
- the RTC/NVRAM backup power, and alarms. This driver may not
- expose all those available chip features.
+ the RTC/NVRAM backup power, and alarms. NVRAM is visible in
+ sysfs, but other chip features may not be available.
This driver can also be built as a module. If so, the module
will be called rtc-ds1307.
config RTC_DRV_DS1374
- tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
+ tristate "Dallas/Maxim DS1374"
depends on RTC_CLASS && I2C
help
If you say yes here you get support for Dallas Semiconductor
will be called rtc-ds1672.
config RTC_DRV_MAX6900
- tristate "Maxim 6900"
+ tristate "Maxim MAX6900"
help
If you say yes here you will get support for the
Maxim MAX6900 I2C RTC chip.
will be called rtc-rs5c372.
config RTC_DRV_ISL1208
- tristate "Intersil 1208"
+ tristate "Intersil ISL1208"
help
If you say yes here you get support for the
- Intersil 1208 RTC chip.
+ Intersil ISL1208 RTC chip.
This driver can also be built as a module. If so, the module
will be called rtc-isl1208.
will be called rtc-pcf8583.
config RTC_DRV_M41T80
- tristate "ST M41T80 series RTC"
+ tristate "ST M41T80/81/82/83/84/85/87"
help
If you say Y here you will get support for the
ST M41T80 RTC chips series. Currently following chips are
if SPI_MASTER
+config RTC_DRV_MAX6902
+ tristate "Maxim MAX6902"
+ help
+ If you say yes here you will get support for the
+ Maxim MAX6902 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max6902.
+
config RTC_DRV_RS5C348
tristate "Ricoh RS5C348A/B"
help
This driver can also be built as a module. If so, the module
will be called rtc-rs5c348.
-config RTC_DRV_MAX6902
- tristate "Maxim 6902"
- help
- If you say yes here you will get support for the
- Maxim MAX6902 SPI RTC chip.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-max6902.
-
endif # SPI_MASTER
comment "Platform RTC drivers"
help
If you say yes here you get support for the Dallas DS1216 RTC chips.
+config RTC_DRV_DS1302
+ tristate "Dallas DS1302"
+ depends on SH_SECUREEDGE5410
+ help
+ If you say yes here you get support for the Dallas DS1302 RTC chips.
+
config RTC_DRV_DS1553
- tristate "Dallas DS1553"
+ tristate "Maxim/Dallas DS1553"
help
If you say yes here you get support for the
- Dallas DS1553 timekeeping chip.
+ Maxim/Dallas DS1553 timekeeping chip.
This driver can also be built as a module. If so, the module
will be called rtc-ds1553.
-config RTC_DRV_STK17TA8
- tristate "Simtek STK17TA8"
- depends on RTC_CLASS
+config RTC_DRV_DS1742
+ tristate "Maxim/Dallas DS1742/1743"
help
If you say yes here you get support for the
- Simtek STK17TA8 timekeeping chip.
+ Maxim/Dallas DS1742/1743 timekeeping chip.
This driver can also be built as a module. If so, the module
- will be called rtc-stk17ta8.
+ will be called rtc-ds1742.
-config RTC_DRV_DS1742
- tristate "Dallas DS1742/1743"
+config RTC_DRV_STK17TA8
+ tristate "Simtek STK17TA8"
+ depends on RTC_CLASS
help
If you say yes here you get support for the
- Dallas DS1742/1743 timekeeping chip.
+ Simtek STK17TA8 timekeeping chip.
This driver can also be built as a module. If so, the module
- will be called rtc-ds1742.
+ will be called rtc-stk17ta8.
config RTC_DRV_M48T86
tristate "ST M48T86/Dallas DS12887"
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on RTC_CLASS && (CPU_SH3 || CPU_SH4)
+ depends on RTC_CLASS && SUPERH
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
- depends on BFIN
+ depends on BLACKFIN
help
If you say yes here you will get support for the
Blackfin On-Chip Real Time Clock.