regulator->dev = dev;
/* Add a link to the device sysfs entry */
- size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
- dev->kobj.name, supply_name);
+ size = snprintf(buf, REG_STR_SIZE, "%s-%s",
+ dev->kobj.name, supply_name);
if (size >= REG_STR_SIZE)
goto overflow_err;
/* non-fatal */
}
} else {
- regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
+ regulator->supply_name = kstrdup_const(supply_name, GFP_KERNEL);
if (regulator->supply_name == NULL)
goto overflow_err;
}
* regulator_dev_lookup - lookup a regulator device.
* @dev: device for regulator "consumer".
* @supply: Supply name or regulator ID.
- * @ret: 0 on success, -ENODEV if lookup fails permanently, -EPROBE_DEFER if
- * lookup could succeed in the future.
*
* If successful, returns a struct regulator_dev that corresponds to the name
- * @supply and with the embedded struct device refcount incremented by one,
- * or NULL on failure. The refcount must be dropped by calling put_device().
+ * @supply and with the embedded struct device refcount incremented by one.
+ * The refcount must be dropped by calling put_device().
+ * On failure one of the following ERR-PTR-encoded values is returned:
+ * -ENODEV if lookup fails permanently, -EPROBE_DEFER if lookup could succeed
+ * in the future.
*/
static struct regulator_dev *regulator_dev_lookup(struct device *dev,
- const char *supply,
- int *ret)
+ const char *supply)
{
struct regulator_dev *r;
struct device_node *node;
r = of_find_regulator_by_node(node);
if (r)
return r;
- *ret = -EPROBE_DEFER;
- return NULL;
- } else {
+
/*
- * If we couldn't even get the node then it's
- * not just that the device didn't register
- * yet, there's no node and we'll never
- * succeed.
+ * We have a node, but there is no device.
+ * assume it has not registered yet.
*/
- *ret = -ENODEV;
+ return ERR_PTR(-EPROBE_DEFER);
}
}
if (strcmp(map->supply, supply) == 0 &&
get_device(&map->regulator->dev)) {
- mutex_unlock(®ulator_list_mutex);
- return map->regulator;
+ r = map->regulator;
+ break;
}
}
mutex_unlock(®ulator_list_mutex);
- return NULL;
+ if (r)
+ return r;
+
+ return ERR_PTR(-ENODEV);
}
static int regulator_resolve_supply(struct regulator_dev *rdev)
if (rdev->supply)
return 0;
- r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
- if (!r) {
- if (ret == -ENODEV) {
- /*
- * No supply was specified for this regulator and
- * there will never be one.
- */
- return 0;
- }
+ r = regulator_dev_lookup(dev, rdev->supply_name);
+ if (IS_ERR(r)) {
+ ret = PTR_ERR(r);
/* Did the lookup explicitly defer for us? */
if (ret == -EPROBE_DEFER)
}
}
+ /*
+ * If the supply's parent device is not the same as the
+ * regulator's parent device, then ensure the parent device
+ * is bound before we resolve the supply, in case the parent
+ * device get probe deferred and unregisters the supply.
+ */
+ if (r->dev.parent && r->dev.parent != rdev->dev.parent) {
+ if (!device_is_bound(r->dev.parent)) {
+ put_device(&r->dev);
+ return -EPROBE_DEFER;
+ }
+ }
+
/* Recursively resolve the supply of the supply */
ret = regulator_resolve_supply(r);
if (ret < 0) {
}
/* Internal regulator request function */
-static struct regulator *_regulator_get(struct device *dev, const char *id,
- bool exclusive, bool allow_dummy)
+struct regulator *_regulator_get(struct device *dev, const char *id,
+ enum regulator_get_type get_type)
{
struct regulator_dev *rdev;
- struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
- const char *devname = NULL;
+ struct regulator *regulator;
+ const char *devname = dev ? dev_name(dev) : "deviceless";
int ret;
+ if (get_type >= MAX_GET_TYPE) {
+ dev_err(dev, "invalid type %d in %s\n", get_type, __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
if (id == NULL) {
pr_err("get() with no identifier\n");
return ERR_PTR(-EINVAL);
}
- if (dev)
- devname = dev_name(dev);
-
- if (have_full_constraints())
- ret = -ENODEV;
- else
- ret = -EPROBE_DEFER;
-
- rdev = regulator_dev_lookup(dev, id, &ret);
- if (rdev)
- goto found;
+ rdev = regulator_dev_lookup(dev, id);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
- regulator = ERR_PTR(ret);
+ /*
+ * If regulator_dev_lookup() fails with error other
+ * than -ENODEV our job here is done, we simply return it.
+ */
+ if (ret != -ENODEV)
+ return ERR_PTR(ret);
- /*
- * If we have return value from dev_lookup fail, we do not expect to
- * succeed, so, quit with appropriate error value
- */
- if (ret && ret != -ENODEV)
- return regulator;
+ if (!have_full_constraints()) {
+ dev_warn(dev,
+ "incomplete constraints, dummy supplies not allowed\n");
+ return ERR_PTR(-ENODEV);
+ }
- if (!devname)
- devname = "deviceless";
+ switch (get_type) {
+ case NORMAL_GET:
+ /*
+ * Assume that a regulator is physically present and
+ * enabled, even if it isn't hooked up, and just
+ * provide a dummy.
+ */
+ dev_warn(dev,
+ "%s supply %s not found, using dummy regulator\n",
+ devname, id);
+ rdev = dummy_regulator_rdev;
+ get_device(&rdev->dev);
+ break;
- /*
- * Assume that a regulator is physically present and enabled
- * even if it isn't hooked up and just provide a dummy.
- */
- if (have_full_constraints() && allow_dummy) {
- pr_warn("%s supply %s not found, using dummy regulator\n",
- devname, id);
+ case EXCLUSIVE_GET:
+ dev_warn(dev,
+ "dummy supplies not allowed for exclusive requests\n");
+ /* fall through */
- rdev = dummy_regulator_rdev;
- get_device(&rdev->dev);
- goto found;
- /* Don't log an error when called from regulator_get_optional() */
- } else if (!have_full_constraints() || exclusive) {
- dev_warn(dev, "dummy supplies not allowed\n");
+ default:
+ return ERR_PTR(-ENODEV);
+ }
}
- return regulator;
-
-found:
if (rdev->exclusive) {
regulator = ERR_PTR(-EPERM);
put_device(&rdev->dev);
return regulator;
}
- if (exclusive && rdev->open_count) {
+ if (get_type == EXCLUSIVE_GET && rdev->open_count) {
regulator = ERR_PTR(-EBUSY);
put_device(&rdev->dev);
return regulator;
}
if (!try_module_get(rdev->owner)) {
+ regulator = ERR_PTR(-EPROBE_DEFER);
put_device(&rdev->dev);
return regulator;
}
}
rdev->open_count++;
- if (exclusive) {
+ if (get_type == EXCLUSIVE_GET) {
rdev->exclusive = 1;
ret = _regulator_is_enabled(rdev);
*/
struct regulator *regulator_get(struct device *dev, const char *id)
{
- return _regulator_get(dev, id, false, true);
+ return _regulator_get(dev, id, NORMAL_GET);
}
EXPORT_SYMBOL_GPL(regulator_get);
*/
struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
{
- return _regulator_get(dev, id, true, false);
+ return _regulator_get(dev, id, EXCLUSIVE_GET);
}
EXPORT_SYMBOL_GPL(regulator_get_exclusive);
*/
struct regulator *regulator_get_optional(struct device *dev, const char *id)
{
- return _regulator_get(dev, id, false, false);
+ return _regulator_get(dev, id, OPTIONAL_GET);
}
EXPORT_SYMBOL_GPL(regulator_get_optional);
put_device(&rdev->dev);
mutex_unlock(&rdev->mutex);
- kfree(regulator->supply_name);
+ kfree_const(regulator->supply_name);
kfree(regulator);
module_put(rdev->owner);
if (ret < 0)
return ret;
+ _notifier_call_chain(rdev, REGULATOR_EVENT_ENABLE,
+ NULL);
} else if (ret < 0) {
rdev_err(rdev, "is_enabled() failed: %d\n", ret);
return ret;
ret = ops->list_voltage(rdev, selector);
if (lock)
mutex_unlock(&rdev->mutex);
- } else if (rdev->supply) {
+ } else if (rdev->is_switch && rdev->supply) {
ret = _regulator_list_voltage(rdev->supply, selector, lock);
} else {
return -EINVAL;
if (rdev->desc->n_voltages)
return rdev->desc->n_voltages;
- if (!rdev->supply)
+ if (!rdev->is_switch || !rdev->supply)
return -EINVAL;
return regulator_count_voltages(rdev->supply);
ramp_delay = rdev->constraints->ramp_delay;
else if (rdev->desc->ramp_delay)
ramp_delay = rdev->desc->ramp_delay;
+ else if (rdev->constraints->settling_time)
+ return rdev->constraints->settling_time;
if (ramp_delay == 0) {
rdev_dbg(rdev, "ramp_delay not set\n");
if (ret < 0)
goto out2;
- if (rdev->supply && (rdev->desc->min_dropout_uV ||
- !rdev->desc->ops->get_voltage)) {
+ if (rdev->supply &&
+ regulator_ops_is_valid(rdev->supply->rdev,
+ REGULATOR_CHANGE_VOLTAGE) &&
+ (rdev->desc->min_dropout_uV || !rdev->desc->ops->get_voltage)) {
int current_supply_uV;
int selector;
for (++i; i < num_consumers; ++i) {
r = regulator_enable(consumers[i].consumer);
if (r != 0)
- pr_err("Failed to reename %s: %d\n",
+ pr_err("Failed to re-enable %s: %d\n",
consumers[i].supply, r);
}
struct regulator_bulk_data *consumers)
{
int i;
- int ret;
+ int ret = 0;
- for (i = 0; i < num_consumers; i++)
+ for (i = 0; i < num_consumers; i++) {
consumers[i].ret =
regulator_force_disable(consumers[i].consumer);
- for (i = 0; i < num_consumers; i++) {
- if (consumers[i].ret != 0) {
+ /* Store first error for reporting */
+ if (consumers[i].ret && !ret)
ret = consumers[i].ret;
- goto out;
- }
}
- return 0;
-out:
return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_force_disable);
mutex_unlock(®ulator_list_mutex);
}
+ if (!rdev->desc->ops->get_voltage &&
+ !rdev->desc->ops->list_voltage &&
+ !rdev->desc->fixed_uV)
+ rdev->is_switch = true;
+
ret = device_register(&rdev->dev);
if (ret != 0) {
put_device(&rdev->dev);
seq_puts(s, "\n");
list_for_each_entry(consumer, &rdev->consumer_list, list) {
- if (consumer->dev->class == ®ulator_class)
+ if (consumer->dev && consumer->dev->class == ®ulator_class)
continue;
seq_printf(s, "%*s%-*s ",
(level + 1) * 3 + 1, "",
- 30 - (level + 1) * 3, dev_name(consumer->dev));
+ 30 - (level + 1) * 3,
+ consumer->dev ? dev_name(consumer->dev) : "deviceless");
switch (rdev->desc->type) {
case REGULATOR_VOLTAGE:
if (of_have_populated_dt())
has_full_constraints = true;
+ /*
+ * Regulators may had failed to resolve their input supplies
+ * when were registered, either because the input supply was
+ * not registered yet or because its parent device was not
+ * bound yet. So attempt to resolve the input supplies for
+ * pending regulators before trying to disable unused ones.
+ */
+ class_for_each_device(®ulator_class, NULL, NULL,
+ regulator_register_resolve_supply);
+
/* If we have a full configuration then disable any regulators
* we have permission to change the status for and which are
* not in use or always_on. This is effectively the default
projects / linux-block.git / blobdiff