return retval;
}
-int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
* either RTS or CTS-to-self frame and handles everything
* inside the hardware.
*/
- if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
- IEEE80211_TX_RC_USE_CTS_PROTECT)) &&
- !rt2x00dev->ops->hw->set_rts_threshold) {
+ if (!rt2x00dev->ops->hw->set_rts_threshold &&
+ (tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
+ IEEE80211_TX_RC_USE_CTS_PROTECT))) {
if (rt2x00queue_available(queue) <= 1)
goto exit_fail;
if (rt2x00queue_threshold(queue))
rt2x00queue_pause_queue(queue);
- return NETDEV_TX_OK;
+ return;
exit_fail:
ieee80211_stop_queue(rt2x00dev->hw, qid);
dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
intf->beacon = entry;
/*
- * The MAC adddress must be configured after the device
+ * The MAC address must be configured after the device
* has been initialized. Otherwise the device can reset
* the MAC registers.
* The BSSID address must only be configured in AP mode,
bss_conf->bssid);
/*
- * Update the beacon.
+ * Update the beacon. This is only required on USB devices. PCI
+ * devices fetch beacons periodically.
*/
- if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED))
- rt2x00queue_update_beacon(rt2x00dev, vif,
- bss_conf->enable_beacon);
+ if (changes & BSS_CHANGED_BEACON && rt2x00_is_usb(rt2x00dev))
+ rt2x00queue_update_beacon(rt2x00dev, vif);
+
+ /*
+ * Start/stop beaconing.
+ */
+ if (changes & BSS_CHANGED_BEACON_ENABLED) {
+ if (!bss_conf->enable_beacon && intf->enable_beacon) {
+ rt2x00queue_clear_beacon(rt2x00dev, vif);
+ rt2x00dev->intf_beaconing--;
+ intf->enable_beacon = false;
+
+ if (rt2x00dev->intf_beaconing == 0) {
+ /*
+ * Last beaconing interface disabled
+ * -> stop beacon queue.
+ */
+ mutex_lock(&intf->beacon_skb_mutex);
+ rt2x00queue_stop_queue(rt2x00dev->bcn);
+ mutex_unlock(&intf->beacon_skb_mutex);
+ }
+
+
+ } else if (bss_conf->enable_beacon && !intf->enable_beacon) {
+ rt2x00dev->intf_beaconing++;
+ intf->enable_beacon = true;
+
+ if (rt2x00dev->intf_beaconing == 1) {
+ /*
+ * First beaconing interface enabled
+ * -> start beacon queue.
+ */
+ mutex_lock(&intf->beacon_skb_mutex);
+ rt2x00queue_start_queue(rt2x00dev->bcn);
+ mutex_unlock(&intf->beacon_skb_mutex);
+ }
+ }
+ }
/*
* When the association status has changed we must reset the link