/*
- Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
* Signal information.
* Defaul offset is required for RSSI <-> dBm conversion.
*/
-#define MAX_SIGNAL 100
-#define MAX_RX_SSI -1
#define DEFAULT_RSSI_OFFSET 100
/*
#define BBP_SIZE 0x0020
#define RF_SIZE 0x0010
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES 2
+
/*
* Control/Status Registers(CSR).
* Some values are set in TU, whereas 1 TU == 1024 us.
* Word2
*/
#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff)
-#define RXD_W2_SIGNAL FIELD32(0x00ff0000)
-#define RXD_W2_RSSI FIELD32(0xff000000)
+#define RXD_W2_BBR0 FIELD32(0x00ff0000)
+#define RXD_W2_SIGNAL FIELD32(0xff000000)
/*
* Word3
*/
-#define RXD_W3_BBR2 FIELD32(0x000000ff)
+#define RXD_W3_RSSI FIELD32(0x000000ff)
#define RXD_W3_BBR3 FIELD32(0x0000ff00)
#define RXD_W3_BBR4 FIELD32(0x00ff0000)
#define RXD_W3_BBR5 FIELD32(0xff000000)
#define RXD_W7_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to dscape value
- * and from dscape value to register value.
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
* NOTE: Logics in rt2400pci for txpower are reversed
* compared to the other rt2x00 drivers. A higher txpower
* value means that the txpower must be lowered. This is
* important when converting the value coming from the
- * dscape stack to the rt2400 acceptable value.
+ * mac80211 stack to the rt2400 acceptable value.
*/
#define MIN_TXPOWER 31
#define MAX_TXPOWER 62