hcmd.len[0] = priv->calib_results[i].buf_len;
hcmd.data[0] = priv->calib_results[i].buf;
hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
- ret = trans_send_cmd(&priv->trans, &hcmd);
+ ret = iwl_trans_send_cmd(trans(priv), &hcmd);
if (ret) {
IWL_ERR(priv, "Error %d iteration %d\n",
ret, i);
memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
sizeof(u16)*HD_TABLE_SIZE);
- return trans_send_cmd(&priv->trans, &cmd_out);
+ return iwl_trans_send_cmd(trans(priv), &cmd_out);
}
/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
&(cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX]),
sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES);
- return trans_send_cmd(&priv->trans, &cmd_out);
+ return iwl_trans_send_cmd(trans(priv), &cmd_out);
}
void iwl_init_sensitivity(struct iwl_priv *priv)
u8 first_chain;
u16 i = 0;
- average_sig[0] = data->chain_signal_a /
- priv->cfg->base_params->chain_noise_num_beacons;
- average_sig[1] = data->chain_signal_b /
- priv->cfg->base_params->chain_noise_num_beacons;
- average_sig[2] = data->chain_signal_c /
- priv->cfg->base_params->chain_noise_num_beacons;
+ average_sig[0] = data->chain_signal_a / IWL_CAL_NUM_BEACONS;
+ average_sig[1] = data->chain_signal_b / IWL_CAL_NUM_BEACONS;
+ average_sig[2] = data->chain_signal_c / IWL_CAL_NUM_BEACONS;
if (average_sig[0] >= average_sig[1]) {
max_average_sig = average_sig[0];
priv->phy_calib_chain_noise_gain_cmd);
cmd.delta_gain_1 = data->delta_gain_code[1];
cmd.delta_gain_2 = data->delta_gain_code[2];
- trans_send_cmd_pdu(&priv->trans, REPLY_PHY_CALIBRATION_CMD,
+ iwl_trans_send_cmd_pdu(trans(priv), REPLY_PHY_CALIBRATION_CMD,
CMD_ASYNC, sizeof(cmd), &cmd);
data->radio_write = 1;
/* If this is the "chain_noise_num_beacons", determine:
* 1) Disconnected antennas (using signal strengths)
* 2) Differential gain (using silence noise) to balance receivers */
- if (data->beacon_count !=
- priv->cfg->base_params->chain_noise_num_beacons)
+ if (data->beacon_count != IWL_CAL_NUM_BEACONS)
return;
/* Analyze signal for disconnected antenna */
iwl_find_disconn_antenna(priv, average_sig, data);
/* Analyze noise for rx balance */
- average_noise[0] = data->chain_noise_a /
- priv->cfg->base_params->chain_noise_num_beacons;
- average_noise[1] = data->chain_noise_b /
- priv->cfg->base_params->chain_noise_num_beacons;
- average_noise[2] = data->chain_noise_c /
- priv->cfg->base_params->chain_noise_num_beacons;
+ average_noise[0] = data->chain_noise_a / IWL_CAL_NUM_BEACONS;
+ average_noise[1] = data->chain_noise_b / IWL_CAL_NUM_BEACONS;
+ average_noise[2] = data->chain_noise_c / IWL_CAL_NUM_BEACONS;
for (i = 0; i < NUM_RX_CHAINS; i++) {
if (!(data->disconn_array[i]) &&