if (!bond_has_slaves(bond))
goto down;
- if (bond->params.mode == BOND_MODE_8023AD)
+ if (BOND_MODE(bond) == BOND_MODE_8023AD)
return bond_3ad_set_carrier(bond);
bond_for_each_slave(bond, slave, iter) {
struct list_head *iter;
int err = 0;
- if (USES_PRIMARY(bond->params.mode)) {
+ if (bond_uses_primary(bond)) {
/* write lock already acquired */
if (bond->curr_active_slave) {
err = dev_set_promiscuity(bond->curr_active_slave->dev,
struct list_head *iter;
int err = 0;
- if (USES_PRIMARY(bond->params.mode)) {
+ if (bond_uses_primary(bond)) {
/* write lock already acquired */
if (bond->curr_active_slave) {
err = dev_set_allmulti(bond->curr_active_slave->dev,
dev_uc_unsync(slave_dev, bond_dev);
dev_mc_unsync(slave_dev, bond_dev);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
/* del lacpdu mc addr from mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
/*--------------------------- Active slave change ---------------------------*/
/* Update the hardware address list and promisc/allmulti for the new and
- * old active slaves (if any). Modes that are !USES_PRIMARY keep all
- * slaves up date at all times; only the USES_PRIMARY modes need to call
+ * old active slaves (if any). Modes that are not using primary keep all
+ * slaves up date at all times; only the modes that use primary need to call
* this function to swap these settings during a failover.
*/
static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active,
bond_for_each_slave(bond, slave, iter) {
if (slave->link == BOND_LINK_UP)
return slave;
- if (slave->link == BOND_LINK_BACK && IS_UP(slave->dev) &&
+ if (slave->link == BOND_LINK_BACK && bond_slave_is_up(slave) &&
slave->delay < mintime) {
mintime = slave->delay;
bestslave = slave;
new_active->last_link_up = jiffies;
if (new_active->link == BOND_LINK_BACK) {
- if (USES_PRIMARY(bond->params.mode)) {
+ if (bond_uses_primary(bond)) {
pr_info("%s: making interface %s the new active one %d ms earlier\n",
bond->dev->name, new_active->dev->name,
(bond->params.updelay - new_active->delay) * bond->params.miimon);
new_active->delay = 0;
new_active->link = BOND_LINK_UP;
- if (bond->params.mode == BOND_MODE_8023AD)
+ if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
if (bond_is_lb(bond))
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
} else {
- if (USES_PRIMARY(bond->params.mode)) {
+ if (bond_uses_primary(bond)) {
pr_info("%s: making interface %s the new active one\n",
bond->dev->name, new_active->dev->name);
}
}
}
- if (USES_PRIMARY(bond->params.mode))
+ if (bond_uses_primary(bond))
bond_hw_addr_swap(bond, new_active, old_active);
if (bond_is_lb(bond)) {
rcu_assign_pointer(bond->curr_active_slave, new_active);
}
- if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
+ if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) {
if (old_active)
bond_set_slave_inactive_flags(old_active,
BOND_SLAVE_NOTIFY_NOW);
* resend only if bond is brought up with the affected
* bonding modes and the retransmission is enabled */
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
- ((USES_PRIMARY(bond->params.mode) && new_active) ||
- bond->params.mode == BOND_MODE_ROUNDROBIN)) {
+ ((bond_uses_primary(bond) && new_active) ||
+ BOND_MODE(bond) == BOND_MODE_ROUNDROBIN)) {
bond->igmp_retrans = bond->params.resend_igmp;
queue_delayed_work(bond->wq, &bond->mcast_work, 1);
}
struct slave *slave;
bond_for_each_slave(bond, slave, iter)
- if (IS_UP(slave->dev))
+ if (bond_slave_is_up(slave))
slave_disable_netpoll(slave);
}
if (!bond_has_slaves(bond))
goto done;
+ vlan_features &= NETIF_F_ALL_FOR_ALL;
bond_for_each_slave(bond, slave, iter) {
vlan_features = netdev_increment_features(vlan_features,
struct bonding *bond)
{
if (bond_is_slave_inactive(slave)) {
- if (bond->params.mode == BOND_MODE_ALB &&
+ if (BOND_MODE(bond) == BOND_MODE_ALB &&
skb->pkt_type != PACKET_BROADCAST &&
skb->pkt_type != PACKET_MULTICAST)
return false;
skb->dev = bond->dev;
- if (bond->params.mode == BOND_MODE_ALB &&
+ if (BOND_MODE(bond) == BOND_MODE_ALB &&
bond->dev->priv_flags & IFF_BRIDGE_PORT &&
skb->pkt_type == PACKET_HOST) {
rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE, GFP_KERNEL);
}
+static struct slave *bond_alloc_slave(struct bonding *bond)
+{
+ struct slave *slave = NULL;
+
+ slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
+ if (!slave)
+ return NULL;
+
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
+ SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info),
+ GFP_KERNEL);
+ if (!SLAVE_AD_INFO(slave)) {
+ kfree(slave);
+ return NULL;
+ }
+ }
+ return slave;
+}
+
+static void bond_free_slave(struct slave *slave)
+{
+ struct bonding *bond = bond_get_bond_by_slave(slave);
+
+ if (BOND_MODE(bond) == BOND_MODE_8023AD)
+ kfree(SLAVE_AD_INFO(slave));
+
+ kfree(slave);
+}
+
/* enslave device <slave> to bond device <master> */
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
if (!bond_has_slaves(bond)) {
pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address\n",
bond_dev->name);
- if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
+ if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) {
bond->params.fail_over_mac = BOND_FOM_ACTIVE;
pr_warn("%s: Setting fail_over_mac to active for active-backup mode\n",
bond_dev->name);
bond->dev->addr_assign_type == NET_ADDR_RANDOM)
bond_set_dev_addr(bond->dev, slave_dev);
- new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
+ new_slave = bond_alloc_slave(bond);
if (!new_slave) {
res = -ENOMEM;
goto err_undo_flags;
}
+
+ new_slave->bond = bond;
+ new_slave->dev = slave_dev;
/*
* Set the new_slave's queue_id to be zero. Queue ID mapping
* is set via sysfs or module option if desired.
ether_addr_copy(new_slave->perm_hwaddr, slave_dev->dev_addr);
if (!bond->params.fail_over_mac ||
- bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+ BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/*
* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
goto err_restore_mac;
}
- new_slave->bond = bond;
- new_slave->dev = slave_dev;
slave_dev->priv_flags |= IFF_BONDING;
if (bond_is_lb(bond)) {
goto err_close;
}
- /* If the mode USES_PRIMARY, then the following is handled by
+ /* If the mode uses primary, then the following is handled by
* bond_change_active_slave().
*/
- if (!USES_PRIMARY(bond->params.mode)) {
+ if (!bond_uses_primary(bond)) {
/* set promiscuity level to new slave */
if (bond_dev->flags & IFF_PROMISC) {
res = dev_set_promiscuity(slave_dev, 1);
netif_addr_unlock_bh(bond_dev);
}
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
/* add lacpdu mc addr to mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
- if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
+ if (bond_uses_primary(bond) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bond->primary_slave = new_slave;
}
}
- switch (bond->params.mode) {
+ switch (BOND_MODE(bond)) {
case BOND_MODE_ACTIVEBACKUP:
bond_set_slave_inactive_flags(new_slave,
BOND_SLAVE_NOTIFY_NOW);
bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW);
/* if this is the first slave */
if (!prev_slave) {
- SLAVE_AD_INFO(new_slave).id = 1;
+ SLAVE_AD_INFO(new_slave)->id = 1;
/* Initialize AD with the number of times that the AD timer is called in 1 second
* can be called only after the mac address of the bond is set
*/
bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
} else {
- SLAVE_AD_INFO(new_slave).id =
- SLAVE_AD_INFO(prev_slave).id + 1;
+ SLAVE_AD_INFO(new_slave)->id =
+ SLAVE_AD_INFO(prev_slave)->id + 1;
}
bond_3ad_bind_slave(new_slave);
bond_compute_features(bond);
bond_set_carrier(bond);
- if (USES_PRIMARY(bond->params.mode)) {
+ if (bond_uses_primary(bond)) {
block_netpoll_tx();
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
netdev_rx_handler_unregister(slave_dev);
err_detach:
- if (!USES_PRIMARY(bond->params.mode))
+ if (!bond_uses_primary(bond))
bond_hw_addr_flush(bond_dev, slave_dev);
vlan_vids_del_by_dev(slave_dev, bond_dev);
err_restore_mac:
if (!bond->params.fail_over_mac ||
- bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+ BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* XXX TODO - fom follow mode needs to change master's
* MAC if this slave's MAC is in use by the bond, or at
* least print a warning.
dev_set_mtu(slave_dev, new_slave->original_mtu);
err_free:
- kfree(new_slave);
+ bond_free_slave(new_slave);
err_undo_flags:
/* Enslave of first slave has failed and we need to fix master's mac */
write_lock_bh(&bond->lock);
/* Inform AD package of unbinding of slave. */
- if (bond->params.mode == BOND_MODE_8023AD)
+ if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_unbind_slave(slave);
write_unlock_bh(&bond->lock);
bond->current_arp_slave = NULL;
if (!all && (!bond->params.fail_over_mac ||
- bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
+ BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP)) {
if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) &&
bond_has_slaves(bond))
pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s - set the HWaddr of %s to a different address to avoid conflicts\n",
/* must do this from outside any spinlocks */
vlan_vids_del_by_dev(slave_dev, bond_dev);
- /* If the mode USES_PRIMARY, then this cases was handled above by
+ /* If the mode uses primary, then this cases was handled above by
* bond_change_active_slave(..., NULL)
*/
- if (!USES_PRIMARY(bond->params.mode)) {
+ if (!bond_uses_primary(bond)) {
/* unset promiscuity level from slave
* NOTE: The NETDEV_CHANGEADDR call above may change the value
* of the IFF_PROMISC flag in the bond_dev, but we need the
dev_close(slave_dev);
if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
- bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+ BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* restore original ("permanent") mac address */
ether_addr_copy(addr.sa_data, slave->perm_hwaddr);
addr.sa_family = slave_dev->type;
slave_dev->priv_flags &= ~IFF_BONDING;
- kfree(slave);
+ bond_free_slave(slave);
return 0; /* deletion OK */
}
{
struct bonding *bond = netdev_priv(bond_dev);
- info->bond_mode = bond->params.mode;
+ info->bond_mode = BOND_MODE(bond);
info->miimon = bond->params.miimon;
info->num_slaves = bond->slave_cnt;
if (slave->delay) {
pr_info("%s: link status down for %sinterface %s, disabling it in %d ms\n",
bond->dev->name,
- (bond->params.mode ==
+ (BOND_MODE(bond) ==
BOND_MODE_ACTIVEBACKUP) ?
(bond_is_active_slave(slave) ?
"active " : "backup ") : "",
slave->link = BOND_LINK_UP;
slave->last_link_up = jiffies;
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
/* prevent it from being the active one */
bond_set_backup_slave(slave);
- } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+ } else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* make it immediately active */
bond_set_active_slave(slave);
} else if (slave != bond->primary_slave) {
slave->duplex ? "full" : "half");
/* notify ad that the link status has changed */
- if (bond->params.mode == BOND_MODE_8023AD)
+ if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_handle_link_change(slave, BOND_LINK_UP);
if (bond_is_lb(bond))
slave->link = BOND_LINK_DOWN;
- if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
- bond->params.mode == BOND_MODE_8023AD)
+ if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP ||
+ BOND_MODE(bond) == BOND_MODE_8023AD)
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
pr_info("%s: link status definitely down for interface %s, disabling it\n",
bond->dev->name, slave->dev->name);
- if (bond->params.mode == BOND_MODE_8023AD)
+ if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_handle_link_change(slave,
BOND_LINK_DOWN);
int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP);
if (!slave_do_arp_validate(bond, slave)) {
- if ((slave_do_arp_validate_only(bond, slave) && is_arp) ||
- !slave_do_arp_validate_only(bond, slave))
+ if ((slave_do_arp_validate_only(bond) && is_arp) ||
+ !slave_do_arp_validate_only(bond))
slave->last_rx = jiffies;
return RX_HANDLER_ANOTHER;
} else if (!is_arp) {
* do - all replies will be rx'ed on same link causing slaves
* to be unstable during low/no traffic periods
*/
- if (IS_UP(slave->dev))
+ if (bond_slave_is_up(slave))
bond_arp_send_all(bond, slave);
}
bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER);
bond_for_each_slave_rcu(bond, slave, iter) {
- if (!found && !before && IS_UP(slave->dev))
+ if (!found && !before && bond_slave_is_up(slave))
before = slave;
- if (found && !new_slave && IS_UP(slave->dev))
+ if (found && !new_slave && bond_slave_is_up(slave))
new_slave = slave;
/* if the link state is up at this point, we
* mark it down - this can happen if we have
* one the current slave so it is still marked
* up when it is actually down
*/
- if (!IS_UP(slave->dev) && slave->link == BOND_LINK_UP) {
+ if (!bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
slave->link = BOND_LINK_DOWN;
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bond_update_speed_duplex(slave);
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
if (old_speed != slave->speed)
bond_3ad_adapter_speed_changed(slave);
if (old_duplex != slave->duplex)
break;
case NETDEV_CHANGENAME:
/* we don't care if we don't have primary set */
- if (!USES_PRIMARY(bond->params.mode) ||
+ if (!bond_uses_primary(bond) ||
!bond->params.primary[0])
break;
* bond_xmit_hash - generate a hash value based on the xmit policy
* @bond: bonding device
* @skb: buffer to use for headers
- * @count: modulo value
*
* This function will extract the necessary headers from the skb buffer and use
* them to generate a hash based on the xmit_policy set in the bonding device
- * which will be reduced modulo count before returning.
*/
-int bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, int count)
+u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb)
{
struct flow_keys flow;
u32 hash;
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER2 ||
!bond_flow_dissect(bond, skb, &flow))
- return bond_eth_hash(skb) % count;
+ return bond_eth_hash(skb);
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER23 ||
bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP23)
hash ^= (hash >> 16);
hash ^= (hash >> 8);
- return hash % count;
+ return hash;
}
/*-------------------------- Device entry points ----------------------------*/
bond_resend_igmp_join_requests_delayed);
INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
- if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
+ if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP)
INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon);
else
INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon);
if (bond_has_slaves(bond)) {
read_lock(&bond->curr_slave_lock);
bond_for_each_slave(bond, slave, iter) {
- if (USES_PRIMARY(bond->params.mode)
+ if (bond_uses_primary(bond)
&& (slave != bond->curr_active_slave)) {
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
/* bond_alb_initialize must be called before the timer
* is started.
*/
- if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB)))
+ if (bond_alb_initialize(bond, (BOND_MODE(bond) == BOND_MODE_ALB)))
return -ENOMEM;
- queue_delayed_work(bond->wq, &bond->alb_work, 0);
+ if (bond->params.tlb_dynamic_lb)
+ queue_delayed_work(bond->wq, &bond->alb_work, 0);
}
if (bond->params.miimon) /* link check interval, in milliseconds. */
bond->recv_probe = bond_arp_rcv;
}
- if (bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
queue_delayed_work(bond->wq, &bond->ad_work, 0);
/* register to receive LACPDUs */
bond->recv_probe = bond_3ad_lacpdu_recv;
rcu_read_lock();
- if (USES_PRIMARY(bond->params.mode)) {
+ if (bond_uses_primary(bond)) {
slave = rcu_dereference(bond->curr_active_slave);
if (slave) {
dev_uc_sync(slave->dev, bond_dev);
struct list_head *iter;
int res = 0;
- if (bond->params.mode == BOND_MODE_ALB)
+ if (BOND_MODE(bond) == BOND_MODE_ALB)
return bond_alb_set_mac_address(bond_dev, addr);
* Returning an error causes ifenslave to fail.
*/
if (bond->params.fail_over_mac &&
- bond->params.mode == BOND_MODE_ACTIVEBACKUP)
+ BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP)
return 0;
if (!is_valid_ether_addr(sa->sa_data))
/* Here we start from the slave with slave_id */
bond_for_each_slave_rcu(bond, slave, iter) {
if (--i < 0) {
- if (slave_can_tx(slave)) {
+ if (bond_slave_can_tx(slave)) {
bond_dev_queue_xmit(bond, skb, slave->dev);
return;
}
bond_for_each_slave_rcu(bond, slave, iter) {
if (--i < 0)
break;
- if (slave_can_tx(slave)) {
+ if (bond_slave_can_tx(slave)) {
bond_dev_queue_xmit(bond, skb, slave->dev);
return;
}
*/
if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) {
slave = rcu_dereference(bond->curr_active_slave);
- if (slave && slave_can_tx(slave))
+ if (slave && bond_slave_can_tx(slave))
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bond_xmit_slave_id(bond, skb, 0);
{
struct bonding *bond = netdev_priv(bond_dev);
- bond_xmit_slave_id(bond, skb, bond_xmit_hash(bond, skb, bond->slave_cnt));
+ bond_xmit_slave_id(bond, skb, bond_xmit_hash(bond, skb) % bond->slave_cnt);
return NETDEV_TX_OK;
}
bond_for_each_slave_rcu(bond, slave, iter) {
if (bond_is_last_slave(bond, slave))
break;
- if (IS_UP(slave->dev) && slave->link == BOND_LINK_UP) {
+ if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
bond_dev_queue_xmit(bond, skb2, slave->dev);
}
}
- if (slave && IS_UP(slave->dev) && slave->link == BOND_LINK_UP)
+ if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)
bond_dev_queue_xmit(bond, skb, slave->dev);
else
dev_kfree_skb_any(skb);
/* Find out if any slaves have the same mapping as this skb. */
bond_for_each_slave_rcu(bond, slave, iter) {
if (slave->queue_id == skb->queue_mapping) {
- if (slave_can_tx(slave)) {
+ if (bond_slave_can_tx(slave)) {
bond_dev_queue_xmit(bond, skb, slave->dev);
return 0;
}
{
struct bonding *bond = netdev_priv(dev);
- if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
- if (!bond_slave_override(bond, skb))
- return NETDEV_TX_OK;
- }
+ if (bond_should_override_tx_queue(bond) &&
+ !bond_slave_override(bond, skb))
+ return NETDEV_TX_OK;
- switch (bond->params.mode) {
+ switch (BOND_MODE(bond)) {
case BOND_MODE_ROUNDROBIN:
return bond_xmit_roundrobin(skb, dev);
case BOND_MODE_ACTIVEBACKUP:
case BOND_MODE_8023AD:
return bond_3ad_xmit_xor(skb, dev);
case BOND_MODE_ALB:
- case BOND_MODE_TLB:
return bond_alb_xmit(skb, dev);
+ case BOND_MODE_TLB:
+ return bond_tlb_xmit(skb, dev);
default:
/* Should never happen, mode already checked */
pr_err("%s: Error: Unknown bonding mode %d\n",
- dev->name, bond->params.mode);
+ dev->name, BOND_MODE(bond));
WARN_ON_ONCE(1);
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->port = PORT_OTHER;
- /* Since SLAVE_IS_OK returns false for all inactive or down slaves, we
+ /* Since bond_slave_can_tx returns false for all inactive or down slaves, we
* do not need to check mode. Though link speed might not represent
* the true receive or transmit bandwidth (not all modes are symmetric)
* this is an accurate maximum.
*/
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, iter) {
- if (SLAVE_IS_OK(slave)) {
+ if (bond_slave_can_tx(slave)) {
if (slave->speed != SPEED_UNKNOWN)
speed += slave->speed;
if (ecmd->duplex == DUPLEX_UNKNOWN &&
if (xmit_hash_policy) {
if ((bond_mode != BOND_MODE_XOR) &&
- (bond_mode != BOND_MODE_8023AD)) {
+ (bond_mode != BOND_MODE_8023AD) &&
+ (bond_mode != BOND_MODE_TLB)) {
pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
} else {
}
/* reset values for 802.3ad/TLB/ALB */
- if (BOND_NO_USES_ARP(bond_mode)) {
+ if (!bond_mode_uses_arp(bond_mode)) {
if (!miimon) {
pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
pr_warn("Forcing miimon to 100msec\n");
catch mistakes */
__be32 ip;
if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) ||
- IS_IP_TARGET_UNUSABLE_ADDRESS(ip)) {
+ !bond_is_ip_target_ok(ip)) {
pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
arp_ip_target[i]);
arp_interval = 0;
pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
}
- if (primary && !USES_PRIMARY(bond_mode)) {
+ if (primary && !bond_mode_uses_primary(bond_mode)) {
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/
params->min_links = min_links;
params->lp_interval = lp_interval;
params->packets_per_slave = packets_per_slave;
+ params->tlb_dynamic_lb = 1; /* Default value */
if (packets_per_slave > 0) {
params->reciprocal_packets_per_slave =
reciprocal_value(packets_per_slave);
projects / linux-2.6-block.git / blobdiff