atl1c: remove private #define.

[linux-2.6-block.git] / drivers / net / atl1c / atl1c_hw.h

diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h
index 3dd675979aa17ebfcfeda3d345981355a924c497..655fc6c4a8a49aa75ddff31f599938cc3d4138a5 100644 (file)
--- a/drivers/net/atl1c/atl1c_hw.h
+++ b/drivers/net/atl1c/atl1c_hw.h
@@ -736,55 +736,16 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
 #define REG_DEBUG_DATA0                0x1900
 #define REG_DEBUG_DATA1                0x1904
 
-/* PHY Control Register */
-#define MII_BMCR                       0x00
-#define BMCR_SPEED_SELECT_MSB          0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define BMCR_COLL_TEST_ENABLE          0x0080  /* Collision test enable */
-#define BMCR_FULL_DUPLEX               0x0100  /* FDX =1, half duplex =0 */
-#define BMCR_RESTART_AUTO_NEG          0x0200  /* Restart auto negotiation */
-#define BMCR_ISOLATE                   0x0400  /* Isolate PHY from MII */
-#define BMCR_POWER_DOWN                        0x0800  /* Power down */
-#define BMCR_AUTO_NEG_EN               0x1000  /* Auto Neg Enable */
-#define BMCR_SPEED_SELECT_LSB          0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define BMCR_LOOPBACK                  0x4000  /* 0 = normal, 1 = loopback */
-#define BMCR_RESET                     0x8000  /* 0 = normal, 1 = PHY reset */
-#define BMCR_SPEED_MASK                        0x2040
-#define BMCR_SPEED_1000                        0x0040
-#define BMCR_SPEED_100                 0x2000
-#define BMCR_SPEED_10                  0x0000
-
-/* PHY Status Register */
-#define MII_BMSR                       0x01
-#define BMMSR_EXTENDED_CAPS            0x0001  /* Extended register capabilities */
-#define BMSR_JABBER_DETECT             0x0002  /* Jabber Detected */
-#define BMSR_LINK_STATUS               0x0004  /* Link Status 1 = link */
-#define BMSR_AUTONEG_CAPS              0x0008  /* Auto Neg Capable */
-#define BMSR_REMOTE_FAULT              0x0010  /* Remote Fault Detect */
-#define BMSR_AUTONEG_COMPLETE          0x0020  /* Auto Neg Complete */
-#define BMSR_PREAMBLE_SUPPRESS         0x0040  /* Preamble may be suppressed */
-#define BMSR_EXTENDED_STATUS           0x0100  /* Ext. status info in Reg 0x0F */
-#define BMSR_100T2_HD_CAPS             0x0200  /* 100T2 Half Duplex Capable */
-#define BMSR_100T2_FD_CAPS             0x0400  /* 100T2 Full Duplex Capable */
-#define BMSR_10T_HD_CAPS               0x0800  /* 10T   Half Duplex Capable */
-#define BMSR_10T_FD_CAPS               0x1000  /* 10T   Full Duplex Capable */
-#define BMSR_100X_HD_CAPS              0x2000  /* 100X  Half Duplex Capable */
-#define BMMII_SR_100X_FD_CAPS          0x4000  /* 100X  Full Duplex Capable */
-#define BMMII_SR_100T4_CAPS            0x8000  /* 100T4 Capable */
-
-#define MII_PHYSID1                    0x02
-#define MII_PHYSID2                    0x03
 #define L1D_MPW_PHYID1                 0xD01C  /* V7 */
 #define L1D_MPW_PHYID2                 0xD01D  /* V1-V6 */
 #define L1D_MPW_PHYID3                 0xD01E  /* V8 */
 
 
 /* Autoneg Advertisement Register */
-#define MII_ADVERTISE                  0x04
-#define ADVERTISE_SPEED_MASK           0x01E0
-#define ADVERTISE_DEFAULT_CAP          0x0DE0
+#define ADVERTISE_DEFAULT_CAP \
+       (ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)
 
 /* 1000BASE-T Control Register */
-#define MII_GIGA_CR                    0x09
 #define GIGA_CR_1000T_REPEATER_DTE     0x0400  /* 1=Repeater/switch device port 0=DTE device */
 
 #define GIGA_CR_1000T_MS_VALUE         0x0800  /* 1=Configure PHY as Master 0=Configure PHY as Slave */