To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+config MFD_LM3533
+ tristate "LM3533 Lighting Power chip"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to enable support for National Semiconductor / TI
+ LM3533 Lighting Power chips.
+
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the LED,
+ backlight or ambient-light-sensor functionality of the device.
+
config TPS6105X
tristate "TPS61050/61052 Boost Converters"
depends on I2C
bool "TPS65910 Power Management chip"
depends on I2C=y && GPIOLIB
select MFD_CORE
- select GPIO_TPS65910
select REGMAP_I2C
+ select IRQ_DOMAIN
help
if you say yes here you get support for the TPS65910 series of
Power Management chips.
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
+config MFD_MAX77693
+ bool "Maxim Semiconductor MAX77693 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to support for Maxim Semiconductor MAX77693.
+ This is a companion Power Management IC with Flash, Haptic, Charger,
+ and MUIC(Micro USB Interface Controller) controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
of the device
config MFD_WM8400
- tristate "Support Wolfson Microelectronics WM8400"
+ bool "Support Wolfson Microelectronics WM8400"
select MFD_CORE
- depends on I2C
+ depends on I2C=y
select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
select MFD_CORE
select MFD_WM831X
select REGMAP_I2C
+ select IRQ_DOMAIN
depends on I2C=y && GENERIC_HARDIRQS
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
select MFD_CORE
select MFD_WM831X
select REGMAP_SPI
+ select IRQ_DOMAIN
depends on SPI_MASTER && GENERIC_HARDIRQS
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
tristate
config MFD_MC13XXX
- tristate "Support Freescale MC13783 and MC13892"
- depends on SPI_MASTER
+ tristate
+ depends on SPI_MASTER || I2C
select MFD_CORE
select MFD_MC13783
help
- Support for the Freescale (Atlas) PMIC and audio CODECs
- MC13783 and MC13892.
- This driver provides common support for accessing the device,
+ Enable support for the Freescale MC13783 and MC13892 PMICs.
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_MC13XXX_SPI
+ tristate "Freescale MC13783 and MC13892 SPI interface"
+ depends on SPI_MASTER
+ select REGMAP_SPI
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+ tristate "Freescale MC13892 I2C interface"
+ depends on I2C
+ select REGMAP_I2C
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an I2C bus.
+
config ABX500_CORE
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
default y if ARCH_U300 || ARCH_U8500
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE
+ depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
select MFD_CORE
help
Select this option to enable access to AB8500 power management
LPC bridge function of the Intel SCH provides support for
System Management Bus and General Purpose I/O.
+config LPC_ICH
+ tristate "Intel ICH LPC"
+ depends on PCI
+ select MFD_CORE
+ help
+ The LPC bridge function of the Intel ICH provides support for
+ many functional units. This driver provides needed support for
+ other drivers to control these functions, currently GPIO and
+ watchdog.
+
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
select MFD_CORE
Additional drivers must be enabled in order to use the
different functionality of the device.
+config MFD_STA2X11
+ bool "STA2X11 multi function device support"
+ depends on STA2X11
+ select MFD_CORE
+
config MFD_ANATOP
bool "Support for Freescale i.MX on-chip ANATOP controller"
depends on SOC_IMX6Q