#include "tuner-simple.h"
#include "dib7000p.h"
#include "dibx000_common.h"
+#include "zl10353.h"
static unsigned int debug;
static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 5380,
- .tuner_callback = cx23885_tuner_callback
};
static struct xc5000_config dvico_xc5000_tunerconfig = {
.i2c_address = 0x64,
.if_khz = 5380,
- .tuner_callback = cx23885_tuner_callback
};
static struct tda829x_config tda829x_no_probe = {
.output_mode = OUTMODE_MPEG2_SERIAL,
};
-static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
-{
- struct cx23885_tsport *port = ptr;
- struct cx23885_dev *dev = port->dev;
-
- switch (command) {
- case XC2028_TUNER_RESET:
- /* Send the tuner in then out of reset */
- /* GPIO-2 xc3028 tuner */
- dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
-
- cx_set(GP0_IO, 0x00040000);
- cx_clear(GP0_IO, 0x00000004);
- msleep(5);
-
- cx_set(GP0_IO, 0x00040004);
- msleep(5);
- break;
- case XC2028_RESET_CLK:
- dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
- break;
- default:
- dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
- command, arg);
- return -EINVAL;
- }
-
- return 0;
-}
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+ .demod_address = 0x0f,
+ .if2 = 45600,
+ .no_tuner = 1,
+};
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
struct cx23885_i2c *i2c_bus = NULL;
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
/* init struct videobuf_dvb */
- port->dvb.name = dev->name;
+ fe0->dvb.name = dev->name;
/* init frontend */
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(mt2131_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
i2c_bus = &dev->i2c_bus[0];
switch (alt_tuner) {
case 1:
- port->dvb.frontend =
+ fe0->dvb.frontend =
dvb_attach(s5h1409_attach,
&hauppauge_ezqam_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(tda829x_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
&dev->i2c_bus[1].i2c_adap, 0x42,
&tda829x_no_probe);
- dvb_attach(tda18271_attach, port->dvb.frontend,
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
break;
case 0:
default:
- port->dvb.frontend =
+ fe0->dvb.frontend =
dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL)
- dvb_attach(mt2131_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(mt2131_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
break;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800lp_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(mt2131_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(lgdt330x_attach,
+ fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_express,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
i2c_bus = &dev->i2c_bus[1];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500q_config,
&dev->i2c_bus[0].i2c_adap);
- if (port->dvb.frontend != NULL)
- dvb_attach(xc5000_attach, port->dvb.frontend,
- &i2c_bus->i2c_adap,
- &hauppauge_hvr1500q_tunerconfig, i2c_bus);
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_hvr1500q_tunerconfig);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
i2c_bus = &dev->i2c_bus[1];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500_config,
&dev->i2c_bus[0].i2c_adap);
- if (port->dvb.frontend != NULL) {
+ if (fe0->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &i2c_bus->i2c_adap,
.i2c_addr = 0x61,
- .callback = cx23885_hvr1500_xc3028_callback,
};
static struct xc2028_ctrl ctl = {
- .fname = "xc3028-v27.fw",
+ .fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
.scode_table = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
- port->dvb.frontend, &cfg);
+ fe0->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(tda10048_attach,
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
&hauppauge_hvr1200_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(tda829x_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
&dev->i2c_bus[1].i2c_adap, 0x42,
&tda829x_no_probe);
- dvb_attach(tda18271_attach, port->dvb.frontend,
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_hvr1200_tuner_config);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1400:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(dib7000p_attach,
+ fe0->dvb.frontend = dvb_attach(dib7000p_attach,
&i2c_bus->i2c_adap,
0x12, &hauppauge_hvr1400_dib7000_config);
- if (port->dvb.frontend != NULL) {
+ if (fe0->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
.i2c_addr = 0x64,
- .callback = cx23885_hvr1500_xc3028_callback,
};
static struct xc2028_ctrl ctl = {
- .fname = "xc3028L-v36.fw",
+ .fname = XC3028L_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = 5000,
- .d2633 = 1
+ /* This is true for all demods with v36 firmware? */
+ .type = XC2028_D2633,
};
fe = dvb_attach(xc2028_attach,
- port->dvb.frontend, &cfg);
+ fe0->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
i2c_bus = &dev->i2c_bus[port->nr - 1];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_s5h1409_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend == NULL)
- port->dvb.frontend = dvb_attach(s5h1411_attach,
+ if (fe0->dvb.frontend == NULL)
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&dvico_s5h1411_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL)
- dvb_attach(xc5000_attach, port->dvb.frontend,
- &i2c_bus->i2c_adap,
- &dvico_xc5000_tunerconfig, i2c_bus);
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &dvico_xc5000_tunerconfig);
+ break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
+ i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &i2c_bus->i2c_adap,
+ .i2c_addr = 0x61,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+ &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ }
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+ i2c_bus = &dev->i2c_bus[0];
+
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_bus[1].i2c_adap,
+ .i2c_addr = 0x61,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+ &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
break;
}
- if (NULL == port->dvb.frontend) {
+ if (NULL == fe0->dvb.frontend) {
printk("%s: frontend initialization failed\n", dev->name);
return -1;
}
+ /* define general-purpose callback pointer */
+ fe0->dvb.frontend->callback = cx23885_tuner_callback;
/* Put the analog decoder in standby to keep it quiet */
cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
- if (port->dvb.frontend->ops.analog_ops.standby)
- port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
+ if (fe0->dvb.frontend->ops.analog_ops.standby)
+ fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
/* register everything */
- return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
- &dev->pci->dev, adapter_nr);
+ return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+ &dev->pci->dev, adapter_nr, 0);
+
}
int cx23885_dvb_register(struct cx23885_tsport *port)
{
+
+ struct videobuf_dvb_frontend *fe0;
struct cx23885_dev *dev = port->dev;
- int err;
+ int err, i;
+
+ /* Here we need to allocate the correct number of frontends,
+ * as reflected in the cards struct. The reality is that currrently
+ * no cx23885 boards support this - yet. But, if we don't modify this
+ * code then the second frontend would never be allocated (later)
+ * and fail with error before the attach in dvb_register().
+ * Without these changes we risk an OOPS later. The changes here
+ * are for safety, and should provide a good foundation for the
+ * future addition of any multi-frontend cx23885 based boards.
+ */
+ printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
+ port->num_frontends);
+
+ for (i = 1; i <= port->num_frontends; i++) {
+ if (videobuf_dvb_alloc_frontend(dev, &port->frontends, i) == NULL) {
+ printk(KERN_ERR "%s() failed to alloc\n", __func__);
+ return -ENOMEM;
+ }
- dprintk(1, "%s\n", __func__);
- dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
- dev->board,
- dev->name,
- dev->pci_bus,
- dev->pci_slot);
+ fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
+ if (!fe0)
+ err = -EINVAL;
- err = -ENODEV;
+ dprintk(1, "%s\n", __func__);
+ dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+ dev->board,
+ dev->name,
+ dev->pci_bus,
+ dev->pci_slot);
- /* dvb stuff */
- printk("%s: cx23885 based dvb card\n", dev->name);
- videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock,
+ err = -ENODEV;
+
+ /* dvb stuff */
+ /* We have to init the queue for each frontend on a port. */
+ printk("%s: cx23885 based dvb card\n", dev->name);
+ videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
sizeof(struct cx23885_buffer), port);
+ }
err = dvb_register(port);
if (err != 0)
printk("%s() dvb_register failed err = %d\n", __func__, err);
int cx23885_dvb_unregister(struct cx23885_tsport *port)
{
- /* dvb */
- if(port->dvb.frontend)
- videobuf_dvb_unregister(&port->dvb);
+ struct videobuf_dvb_frontend *fe0;
+
+ /* FIXME: in an error condition where the we have
+ * an expected number of frontends (attach problem)
+ * then this might not clean up correctly, if 1
+ * is invalid.
+ * This comment only applies to future boards IF they
+ * implement MFE support.
+ */
+ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+ if(fe0->dvb.frontend)
+ videobuf_dvb_unregister_bus(&port->frontends);
return 0;
}
projects / linux-2.6-block.git / blobdiff