unsigned char *pkt,
unsigned char pkt_id)
{
+ /*
+ * packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
+ * Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
+ * Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
+ * Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+ * Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+ * Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
+ * Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+ * Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
+ * Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
+ * Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+ * Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
+ * L: Left button
+ * R / M: Non-clickpads: Right / Middle button
+ * Clickpads: When > 2 fingers are down, and some fingers
+ * are in the button area, then the 2 coordinates reported
+ * are for fingers outside the button area and these report
+ * extra fingers being present in the right / left button
+ * area. Note these fingers are not added to the F field!
+ * so if a TWO packet is received and R = 1 then there are
+ * 3 fingers down, etc.
+ * TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
+ * 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+ * otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+ * in NEW fmt
+ * F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+ */
+
mt[0].x = ((pkt[2] & 0x80) << 4);
mt[0].x |= ((pkt[2] & 0x3F) << 5);
mt[0].x |= ((pkt[3] & 0x30) >> 1);
static int alps_get_mt_count(struct input_mt_pos *mt)
{
- int i;
+ int i, fingers = 0;
- for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
- /* empty */;
+ for (i = 0; i < MAX_TOUCHES; i++) {
+ if (mt[i].x != 0 || mt[i].y != 0)
+ fingers++;
+ }
- return i;
+ return fingers;
}
static int alps_decode_packet_v7(struct alps_fields *f,
unsigned char *p,
struct psmouse *psmouse)
{
+ struct alps_data *priv = psmouse->private;
unsigned char pkt_id;
pkt_id = alps_get_packet_id_v7(p);
return 0;
if (pkt_id == V7_PACKET_ID_UNKNOWN)
return -1;
+ /*
+ * NEW packets are send to indicate a discontinuity in the finger
+ * coordinate reporting. Specifically a finger may have moved from
+ * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+ * us.
+ *
+ * NEW packets have 3 problems:
+ * 1) They do not contain middle / right button info (on non clickpads)
+ * this can be worked around by preserving the old button state
+ * 2) They do not contain an accurate fingercount, and they are
+ * typically send when the number of fingers changes. We cannot use
+ * the old finger count as that may mismatch with the amount of
+ * touch coordinates we've available in the NEW packet
+ * 3) Their x data for the second touch is inaccurate leading to
+ * a possible jump of the x coordinate by 16 units when the first
+ * non NEW packet comes in
+ * Since problems 2 & 3 cannot be worked around, just ignore them.
+ */
+ if (pkt_id == V7_PACKET_ID_NEW)
+ return 1;
alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
- if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
- f->left = (p[0] & 0x80) >> 7;
+ if (pkt_id == V7_PACKET_ID_TWO)
+ f->fingers = alps_get_mt_count(f->mt);
+ else /* pkt_id == V7_PACKET_ID_MULTI */
+ f->fingers = 3 + (p[5] & 0x03);
+
+ f->left = (p[0] & 0x80) >> 7;
+ if (priv->flags & ALPS_BUTTONPAD) {
+ if (p[0] & 0x20)
+ f->fingers++;
+ if (p[0] & 0x10)
+ f->fingers++;
+ } else {
f->right = (p[0] & 0x20) >> 5;
f->middle = (p[0] & 0x10) >> 4;
}
- if (pkt_id == V7_PACKET_ID_TWO)
- f->fingers = alps_get_mt_count(f->mt);
- else if (pkt_id == V7_PACKET_ID_MULTI)
- f->fingers = 3 + (p[5] & 0x03);
+ /* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+ if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+ f->mt[0].x = f->mt[1].x;
+ f->mt[0].y = f->mt[1].y;
+ f->mt[1].x = 0;
+ f->mt[1].y = 0;
+ }
return 0;
}
projects / linux-2.6-block.git / blobdiff