ide: remove the legacy ide driver
[linux-block.git] / drivers / ide / ide-disk.c
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
deleted file mode 100644 (file)
index 8413731..0000000
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  Copyright (C) 1994-1998       Linus Torvalds & authors (see below)
- *  Copyright (C) 1998-2002       Linux ATA Development
- *                                   Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003            Red Hat
- *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz
- */
-
-/*
- *  Mostly written by Mark Lord <mlord@pobox.com>
- *                and Gadi Oxman <gadio@netvision.net.il>
- *                and Andre Hedrick <andre@linux-ide.org>
- *
- * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/leds.h>
-#include <linux/ide.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/div64.h>
-
-#include "ide-disk.h"
-
-static const u8 ide_rw_cmds[] = {
-       ATA_CMD_READ_MULTI,
-       ATA_CMD_WRITE_MULTI,
-       ATA_CMD_READ_MULTI_EXT,
-       ATA_CMD_WRITE_MULTI_EXT,
-       ATA_CMD_PIO_READ,
-       ATA_CMD_PIO_WRITE,
-       ATA_CMD_PIO_READ_EXT,
-       ATA_CMD_PIO_WRITE_EXT,
-       ATA_CMD_READ,
-       ATA_CMD_WRITE,
-       ATA_CMD_READ_EXT,
-       ATA_CMD_WRITE_EXT,
-};
-
-static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
-{
-       u8 index, lba48, write;
-
-       lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
-       write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
-
-       if (dma) {
-               cmd->protocol = ATA_PROT_DMA;
-               index = 8;
-       } else {
-               cmd->protocol = ATA_PROT_PIO;
-               if (drive->mult_count) {
-                       cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
-                       index = 0;
-               } else
-                       index = 4;
-       }
-
-       cmd->tf.command = ide_rw_cmds[index + lba48 + write];
-}
-
-/*
- * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
- * using LBA if supported, or CHS otherwise, to address sectors.
- */
-static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
-                                       sector_t block)
-{
-       ide_hwif_t *hwif        = drive->hwif;
-       u16 nsectors            = (u16)blk_rq_sectors(rq);
-       u8 lba48                = !!(drive->dev_flags & IDE_DFLAG_LBA48);
-       u8 dma                  = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
-       struct ide_cmd          cmd;
-       struct ide_taskfile     *tf = &cmd.tf;
-       ide_startstop_t         rc;
-
-       if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
-               if (block + blk_rq_sectors(rq) > 1ULL << 28)
-                       dma = 0;
-               else
-                       lba48 = 0;
-       }
-
-       memset(&cmd, 0, sizeof(cmd));
-       cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-
-       if (drive->dev_flags & IDE_DFLAG_LBA) {
-               if (lba48) {
-                       pr_debug("%s: LBA=0x%012llx\n", drive->name,
-                                       (unsigned long long)block);
-
-                       tf->nsect  = nsectors & 0xff;
-                       tf->lbal   = (u8) block;
-                       tf->lbam   = (u8)(block >>  8);
-                       tf->lbah   = (u8)(block >> 16);
-                       tf->device = ATA_LBA;
-
-                       tf = &cmd.hob;
-                       tf->nsect = (nsectors >> 8) & 0xff;
-                       tf->lbal  = (u8)(block >> 24);
-                       if (sizeof(block) != 4) {
-                               tf->lbam = (u8)((u64)block >> 32);
-                               tf->lbah = (u8)((u64)block >> 40);
-                       }
-
-                       cmd.valid.out.hob = IDE_VALID_OUT_HOB;
-                       cmd.valid.in.hob  = IDE_VALID_IN_HOB;
-                       cmd.tf_flags |= IDE_TFLAG_LBA48;
-               } else {
-                       tf->nsect  = nsectors & 0xff;
-                       tf->lbal   = block;
-                       tf->lbam   = block >>= 8;
-                       tf->lbah   = block >>= 8;
-                       tf->device = ((block >> 8) & 0xf) | ATA_LBA;
-               }
-       } else {
-               unsigned int sect, head, cyl, track;
-
-               track = (int)block / drive->sect;
-               sect  = (int)block % drive->sect + 1;
-               head  = track % drive->head;
-               cyl   = track / drive->head;
-
-               pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
-
-               tf->nsect  = nsectors & 0xff;
-               tf->lbal   = sect;
-               tf->lbam   = cyl;
-               tf->lbah   = cyl >> 8;
-               tf->device = head;
-       }
-
-       cmd.tf_flags |= IDE_TFLAG_FS;
-
-       if (rq_data_dir(rq))
-               cmd.tf_flags |= IDE_TFLAG_WRITE;
-
-       ide_tf_set_cmd(drive, &cmd, dma);
-       cmd.rq = rq;
-
-       if (dma == 0) {
-               ide_init_sg_cmd(&cmd, nsectors << 9);
-               ide_map_sg(drive, &cmd);
-       }
-
-       rc = do_rw_taskfile(drive, &cmd);
-
-       if (rc == ide_stopped && dma) {
-               /* fallback to PIO */
-               cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
-               ide_tf_set_cmd(drive, &cmd, 0);
-               ide_init_sg_cmd(&cmd, nsectors << 9);
-               rc = do_rw_taskfile(drive, &cmd);
-       }
-
-       return rc;
-}
-
-/*
- * 268435455  == 137439 MB or 28bit limit
- * 320173056  == 163929 MB or 48bit addressing
- * 1073741822 == 549756 MB or 48bit addressing fake drive
- */
-
-static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
-                                     sector_t block)
-{
-       ide_hwif_t *hwif = drive->hwif;
-
-       BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
-       BUG_ON(blk_rq_is_passthrough(rq));
-
-       ledtrig_disk_activity(rq_data_dir(rq) == WRITE);
-
-       pr_debug("%s: %sing: block=%llu, sectors=%u\n",
-                drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
-                (unsigned long long)block, blk_rq_sectors(rq));
-
-       if (hwif->rw_disk)
-               hwif->rw_disk(drive, rq);
-
-       return __ide_do_rw_disk(drive, rq, block);
-}
-
-/*
- * Queries for true maximum capacity of the drive.
- * Returns maximum LBA address (> 0) of the drive, 0 if failed.
- */
-static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
-{
-       struct ide_cmd cmd;
-       struct ide_taskfile *tf = &cmd.tf;
-       u64 addr = 0;
-
-       memset(&cmd, 0, sizeof(cmd));
-       if (lba48)
-               tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
-       else
-               tf->command = ATA_CMD_READ_NATIVE_MAX;
-       tf->device  = ATA_LBA;
-
-       cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-       if (lba48) {
-               cmd.valid.out.hob = IDE_VALID_OUT_HOB;
-               cmd.valid.in.hob  = IDE_VALID_IN_HOB;
-               cmd.tf_flags = IDE_TFLAG_LBA48;
-       }
-
-       ide_no_data_taskfile(drive, &cmd);
-
-       /* if OK, compute maximum address value */
-       if (!(tf->status & ATA_ERR))
-               addr = ide_get_lba_addr(&cmd, lba48) + 1;
-
-       return addr;
-}
-
-/*
- * Sets maximum virtual LBA address of the drive.
- * Returns new maximum virtual LBA address (> 0) or 0 on failure.
- */
-static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
-{
-       struct ide_cmd cmd;
-       struct ide_taskfile *tf = &cmd.tf;
-       u64 addr_set = 0;
-
-       addr_req--;
-
-       memset(&cmd, 0, sizeof(cmd));
-       tf->lbal     = (addr_req >>  0) & 0xff;
-       tf->lbam     = (addr_req >>= 8) & 0xff;
-       tf->lbah     = (addr_req >>= 8) & 0xff;
-       if (lba48) {
-               cmd.hob.lbal = (addr_req >>= 8) & 0xff;
-               cmd.hob.lbam = (addr_req >>= 8) & 0xff;
-               cmd.hob.lbah = (addr_req >>= 8) & 0xff;
-               tf->command  = ATA_CMD_SET_MAX_EXT;
-       } else {
-               tf->device   = (addr_req >>= 8) & 0x0f;
-               tf->command  = ATA_CMD_SET_MAX;
-       }
-       tf->device |= ATA_LBA;
-
-       cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-       if (lba48) {
-               cmd.valid.out.hob = IDE_VALID_OUT_HOB;
-               cmd.valid.in.hob  = IDE_VALID_IN_HOB;
-               cmd.tf_flags = IDE_TFLAG_LBA48;
-       }
-
-       ide_no_data_taskfile(drive, &cmd);
-
-       /* if OK, compute maximum address value */
-       if (!(tf->status & ATA_ERR))
-               addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
-
-       return addr_set;
-}
-
-static unsigned long long sectors_to_MB(unsigned long long n)
-{
-       n <<= 9;                /* make it bytes */
-       do_div(n, 1000000);     /* make it MB */
-       return n;
-}
-
-/*
- * Some disks report total number of sectors instead of
- * maximum sector address.  We list them here.
- */
-static const struct drive_list_entry hpa_list[] = {
-       { "ST340823A",  NULL },
-       { "ST320413A",  NULL },
-       { "ST310211A",  NULL },
-       { NULL,         NULL }
-};
-
-static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
-{
-       u64 capacity, set_max;
-
-       capacity = drive->capacity64;
-       set_max  = idedisk_read_native_max_address(drive, lba48);
-
-       if (ide_in_drive_list(drive->id, hpa_list)) {
-               /*
-                * Since we are inclusive wrt to firmware revisions do this
-                * extra check and apply the workaround only when needed.
-                */
-               if (set_max == capacity + 1)
-                       set_max--;
-       }
-
-       return set_max;
-}
-
-static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
-{
-       set_max = idedisk_set_max_address(drive, set_max, lba48);
-       if (set_max)
-               drive->capacity64 = set_max;
-
-       return set_max;
-}
-
-static void idedisk_check_hpa(ide_drive_t *drive)
-{
-       u64 capacity, set_max;
-       int lba48 = ata_id_lba48_enabled(drive->id);
-
-       capacity = drive->capacity64;
-       set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
-
-       if (set_max <= capacity)
-               return;
-
-       drive->probed_capacity = set_max;
-
-       printk(KERN_INFO "%s: Host Protected Area detected.\n"
-                        "\tcurrent capacity is %llu sectors (%llu MB)\n"
-                        "\tnative  capacity is %llu sectors (%llu MB)\n",
-                        drive->name,
-                        capacity, sectors_to_MB(capacity),
-                        set_max, sectors_to_MB(set_max));
-
-       if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
-               return;
-
-       set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
-       if (set_max)
-               printk(KERN_INFO "%s: Host Protected Area disabled.\n",
-                                drive->name);
-}
-
-static int ide_disk_get_capacity(ide_drive_t *drive)
-{
-       u16 *id = drive->id;
-       int lba;
-
-       if (ata_id_lba48_enabled(id)) {
-               /* drive speaks 48-bit LBA */
-               lba = 1;
-               drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
-       } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
-               /* drive speaks 28-bit LBA */
-               lba = 1;
-               drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
-       } else {
-               /* drive speaks boring old 28-bit CHS */
-               lba = 0;
-               drive->capacity64 = drive->cyl * drive->head * drive->sect;
-       }
-
-       drive->probed_capacity = drive->capacity64;
-
-       if (lba) {
-               drive->dev_flags |= IDE_DFLAG_LBA;
-
-               /*
-               * If this device supports the Host Protected Area feature set,
-               * then we may need to change our opinion about its capacity.
-               */
-               if (ata_id_hpa_enabled(id))
-                       idedisk_check_hpa(drive);
-       }
-
-       /* limit drive capacity to 137GB if LBA48 cannot be used */
-       if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
-           drive->capacity64 > 1ULL << 28) {
-               printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
-                      "%llu sectors (%llu MB)\n",
-                      drive->name, (unsigned long long)drive->capacity64,
-                      sectors_to_MB(drive->capacity64));
-               drive->probed_capacity = drive->capacity64 = 1ULL << 28;
-       }
-
-       if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
-           (drive->dev_flags & IDE_DFLAG_LBA48)) {
-               if (drive->capacity64 > 1ULL << 28) {
-                       printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
-                                        " will be used for accessing sectors "
-                                        "> %u\n", drive->name, 1 << 28);
-               } else
-                       drive->dev_flags &= ~IDE_DFLAG_LBA48;
-       }
-
-       return 0;
-}
-
-static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
-{
-       u16 *id = drive->id;
-       int lba48 = ata_id_lba48_enabled(id);
-
-       if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
-           ata_id_hpa_enabled(id) == 0)
-               return;
-
-       /*
-        * according to the spec the SET MAX ADDRESS command shall be
-        * immediately preceded by a READ NATIVE MAX ADDRESS command
-        */
-       if (!ide_disk_hpa_get_native_capacity(drive, lba48))
-               return;
-
-       if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48))
-               drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
-}
-
-static bool idedisk_prep_rq(ide_drive_t *drive, struct request *rq)
-{
-       struct ide_cmd *cmd;
-
-       if (req_op(rq) != REQ_OP_FLUSH)
-               return true;
-
-       if (ide_req(rq)->special) {
-               cmd = ide_req(rq)->special;
-               memset(cmd, 0, sizeof(*cmd));
-       } else {
-               cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
-       }
-
-       /* FIXME: map struct ide_taskfile on rq->cmd[] */
-       BUG_ON(cmd == NULL);
-
-       if (ata_id_flush_ext_enabled(drive->id) &&
-           (drive->capacity64 >= (1UL << 28)))
-               cmd->tf.command = ATA_CMD_FLUSH_EXT;
-       else
-               cmd->tf.command = ATA_CMD_FLUSH;
-       cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd->tf_flags = IDE_TFLAG_DYN;
-       cmd->protocol = ATA_PROT_NODATA;
-       rq->cmd_flags &= ~REQ_OP_MASK;
-       rq->cmd_flags |= REQ_OP_DRV_OUT;
-       ide_req(rq)->type = ATA_PRIV_TASKFILE;
-       ide_req(rq)->special = cmd;
-       cmd->rq = rq;
-
-       return true;
-}
-
-ide_devset_get(multcount, mult_count);
-
-/*
- * This is tightly woven into the driver->do_special can not touch.
- * DON'T do it again until a total personality rewrite is committed.
- */
-static int set_multcount(ide_drive_t *drive, int arg)
-{
-       struct request *rq;
-
-       if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
-               return -EINVAL;
-
-       if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
-               return -EBUSY;
-
-       rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
-       ide_req(rq)->type = ATA_PRIV_TASKFILE;
-
-       drive->mult_req = arg;
-       drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
-       blk_execute_rq(NULL, rq, 0);
-       blk_put_request(rq);
-
-       return (drive->mult_count == arg) ? 0 : -EIO;
-}
-
-ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
-
-static int set_nowerr(ide_drive_t *drive, int arg)
-{
-       if (arg < 0 || arg > 1)
-               return -EINVAL;
-
-       if (arg)
-               drive->dev_flags |= IDE_DFLAG_NOWERR;
-       else
-               drive->dev_flags &= ~IDE_DFLAG_NOWERR;
-
-       drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
-
-       return 0;
-}
-
-static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
-{
-       struct ide_cmd cmd;
-
-       memset(&cmd, 0, sizeof(cmd));
-       cmd.tf.feature = feature;
-       cmd.tf.nsect   = nsect;
-       cmd.tf.command = ATA_CMD_SET_FEATURES;
-       cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-
-       return ide_no_data_taskfile(drive, &cmd);
-}
-
-static void update_flush(ide_drive_t *drive)
-{
-       u16 *id = drive->id;
-       bool wc = false;
-
-       if (drive->dev_flags & IDE_DFLAG_WCACHE) {
-               unsigned long long capacity;
-               int barrier;
-               /*
-                * We must avoid issuing commands a drive does not
-                * understand or we may crash it. We check flush cache
-                * is supported. We also check we have the LBA48 flush
-                * cache if the drive capacity is too large. By this
-                * time we have trimmed the drive capacity if LBA48 is
-                * not available so we don't need to recheck that.
-                */
-               capacity = ide_gd_capacity(drive);
-               barrier = ata_id_flush_enabled(id) &&
-                       (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
-                       ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
-                        capacity <= (1ULL << 28) ||
-                        ata_id_flush_ext_enabled(id));
-
-               printk(KERN_INFO "%s: cache flushes %ssupported\n",
-                      drive->name, barrier ? "" : "not ");
-
-               if (barrier) {
-                       wc = true;
-                       drive->prep_rq = idedisk_prep_rq;
-               }
-       }
-
-       blk_queue_write_cache(drive->queue, wc, false);
-}
-
-ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
-
-static int set_wcache(ide_drive_t *drive, int arg)
-{
-       int err = 1;
-
-       if (arg < 0 || arg > 1)
-               return -EINVAL;
-
-       if (ata_id_flush_enabled(drive->id)) {
-               err = ide_do_setfeature(drive,
-                       arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
-               if (err == 0) {
-                       if (arg)
-                               drive->dev_flags |= IDE_DFLAG_WCACHE;
-                       else
-                               drive->dev_flags &= ~IDE_DFLAG_WCACHE;
-               }
-       }
-
-       update_flush(drive);
-
-       return err;
-}
-
-static int do_idedisk_flushcache(ide_drive_t *drive)
-{
-       struct ide_cmd cmd;
-
-       memset(&cmd, 0, sizeof(cmd));
-       if (ata_id_flush_ext_enabled(drive->id))
-               cmd.tf.command = ATA_CMD_FLUSH_EXT;
-       else
-               cmd.tf.command = ATA_CMD_FLUSH;
-       cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-
-       return ide_no_data_taskfile(drive, &cmd);
-}
-
-ide_devset_get(acoustic, acoustic);
-
-static int set_acoustic(ide_drive_t *drive, int arg)
-{
-       if (arg < 0 || arg > 254)
-               return -EINVAL;
-
-       ide_do_setfeature(drive,
-               arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
-
-       drive->acoustic = arg;
-
-       return 0;
-}
-
-ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
-
-/*
- * drive->addressing:
- *     0: 28-bit
- *     1: 48-bit
- *     2: 48-bit capable doing 28-bit
- */
-static int set_addressing(ide_drive_t *drive, int arg)
-{
-       if (arg < 0 || arg > 2)
-               return -EINVAL;
-
-       if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
-           ata_id_lba48_enabled(drive->id) == 0))
-               return -EIO;
-
-       if (arg == 2)
-               arg = 0;
-
-       if (arg)
-               drive->dev_flags |= IDE_DFLAG_LBA48;
-       else
-               drive->dev_flags &= ~IDE_DFLAG_LBA48;
-
-       return 0;
-}
-
-ide_ext_devset_rw(acoustic, acoustic);
-ide_ext_devset_rw(address, addressing);
-ide_ext_devset_rw(multcount, multcount);
-ide_ext_devset_rw(wcache, wcache);
-
-ide_ext_devset_rw_sync(nowerr, nowerr);
-
-static int ide_disk_check(ide_drive_t *drive, const char *s)
-{
-       return 1;
-}
-
-static void ide_disk_setup(ide_drive_t *drive)
-{
-       struct ide_disk_obj *idkp = drive->driver_data;
-       struct request_queue *q = drive->queue;
-       ide_hwif_t *hwif = drive->hwif;
-       u16 *id = drive->id;
-       char *m = (char *)&id[ATA_ID_PROD];
-       unsigned long long capacity;
-
-       ide_proc_register_driver(drive, idkp->driver);
-
-       if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
-               return;
-
-       if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
-               /*
-                * Removable disks (eg. SYQUEST); ignore 'WD' drives
-                */
-               if (m[0] != 'W' || m[1] != 'D')
-                       drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
-       }
-
-       (void)set_addressing(drive, 1);
-
-       if (drive->dev_flags & IDE_DFLAG_LBA48) {
-               int max_s = 2048;
-
-               if (max_s > hwif->rqsize)
-                       max_s = hwif->rqsize;
-
-               blk_queue_max_hw_sectors(q, max_s);
-       }
-
-       printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
-              queue_max_sectors(q) / 2);
-
-       if (ata_id_is_ssd(id)) {
-               blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
-               blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
-       }
-
-       /* calculate drive capacity, and select LBA if possible */
-       ide_disk_get_capacity(drive);
-
-       /*
-        * if possible, give fdisk access to more of the drive,
-        * by correcting bios_cyls:
-        */
-       capacity = ide_gd_capacity(drive);
-
-       if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
-               if (ata_id_lba48_enabled(drive->id)) {
-                       /* compatibility */
-                       drive->bios_sect = 63;
-                       drive->bios_head = 255;
-               }
-
-               if (drive->bios_sect && drive->bios_head) {
-                       unsigned int cap0 = capacity; /* truncate to 32 bits */
-                       unsigned int cylsz, cyl;
-
-                       if (cap0 != capacity)
-                               drive->bios_cyl = 65535;
-                       else {
-                               cylsz = drive->bios_sect * drive->bios_head;
-                               cyl = cap0 / cylsz;
-                               if (cyl > 65535)
-                                       cyl = 65535;
-                               if (cyl > drive->bios_cyl)
-                                       drive->bios_cyl = cyl;
-                       }
-               }
-       }
-       printk(KERN_INFO "%s: %llu sectors (%llu MB)",
-                        drive->name, capacity, sectors_to_MB(capacity));
-
-       /* Only print cache size when it was specified */
-       if (id[ATA_ID_BUF_SIZE])
-               printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
-
-       printk(KERN_CONT ", CHS=%d/%d/%d\n",
-                        drive->bios_cyl, drive->bios_head, drive->bios_sect);
-
-       /* write cache enabled? */
-       if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
-               drive->dev_flags |= IDE_DFLAG_WCACHE;
-
-       set_wcache(drive, 1);
-
-       if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
-           (drive->head == 0 || drive->head > 16))
-               printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
-                       drive->name, drive->head);
-}
-
-static void ide_disk_flush(ide_drive_t *drive)
-{
-       if (ata_id_flush_enabled(drive->id) == 0 ||
-           (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
-               return;
-
-       if (do_idedisk_flushcache(drive))
-               printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
-}
-
-static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
-{
-       return 0;
-}
-
-static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
-                                int on)
-{
-       struct ide_cmd cmd;
-       int ret;
-
-       if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
-               return 0;
-
-       memset(&cmd, 0, sizeof(cmd));
-       cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
-       cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-       cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-
-       ret = ide_no_data_taskfile(drive, &cmd);
-
-       if (ret)
-               drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
-
-       return ret;
-}
-
-const struct ide_disk_ops ide_ata_disk_ops = {
-       .check                  = ide_disk_check,
-       .unlock_native_capacity = ide_disk_unlock_native_capacity,
-       .get_capacity           = ide_disk_get_capacity,
-       .setup                  = ide_disk_setup,
-       .flush                  = ide_disk_flush,
-       .init_media             = ide_disk_init_media,
-       .set_doorlock           = ide_disk_set_doorlock,
-       .do_request             = ide_do_rw_disk,
-       .ioctl                  = ide_disk_ioctl,
-       .compat_ioctl           = ide_disk_ioctl,
-};