+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 1996-2004 Russell King.
- *
- * Please note that this platform does not support 32-bit IDE IO.
- */
-
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/scatterlist.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/ecard.h>
-
-#define DRV_NAME "icside"
-
-#define ICS_IDENT_OFFSET 0x2280
-
-#define ICS_ARCIN_V5_INTRSTAT 0x0000
-#define ICS_ARCIN_V5_INTROFFSET 0x0004
-#define ICS_ARCIN_V5_IDEOFFSET 0x2800
-#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80
-#define ICS_ARCIN_V5_IDESTEPPING 6
-
-#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000
-#define ICS_ARCIN_V6_INTROFFSET_1 0x2200
-#define ICS_ARCIN_V6_INTRSTAT_1 0x2290
-#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380
-#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000
-#define ICS_ARCIN_V6_INTROFFSET_2 0x3200
-#define ICS_ARCIN_V6_INTRSTAT_2 0x3290
-#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380
-#define ICS_ARCIN_V6_IDESTEPPING 6
-
-struct cardinfo {
- unsigned int dataoffset;
- unsigned int ctrloffset;
- unsigned int stepping;
-};
-
-static struct cardinfo icside_cardinfo_v5 = {
- .dataoffset = ICS_ARCIN_V5_IDEOFFSET,
- .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET,
- .stepping = ICS_ARCIN_V5_IDESTEPPING,
-};
-
-static struct cardinfo icside_cardinfo_v6_1 = {
- .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1,
- .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1,
- .stepping = ICS_ARCIN_V6_IDESTEPPING,
-};
-
-static struct cardinfo icside_cardinfo_v6_2 = {
- .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2,
- .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2,
- .stepping = ICS_ARCIN_V6_IDESTEPPING,
-};
-
-struct icside_state {
- unsigned int channel;
- unsigned int enabled;
- void __iomem *irq_port;
- void __iomem *ioc_base;
- unsigned int sel;
- unsigned int type;
- struct ide_host *host;
-};
-
-#define ICS_TYPE_A3IN 0
-#define ICS_TYPE_A3USER 1
-#define ICS_TYPE_V6 3
-#define ICS_TYPE_V5 15
-#define ICS_TYPE_NOTYPE ((unsigned int)-1)
-
-/* ---------------- Version 5 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose : enable interrupts from card
- */
-static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
-
- writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
-
- readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v5 = {
- .irqenable = icside_irqenable_arcin_v5,
- .irqdisable = icside_irqdisable_arcin_v5,
-};
-
-
-/* ---------------- Version 6 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose : enable interrupts from card
- */
-static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
- void __iomem *base = state->irq_port;
-
- state->enabled = 1;
-
- switch (state->channel) {
- case 0:
- writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
- readb(base + ICS_ARCIN_V6_INTROFFSET_2);
- break;
- case 1:
- writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
- readb(base + ICS_ARCIN_V6_INTROFFSET_1);
- break;
- }
-}
-
-/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
-
- state->enabled = 0;
-
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-}
-
-/* Prototype: icside_irqprobe(struct expansion_card *ec)
- * Purpose : detect an active interrupt from card
- */
-static int icside_irqpending_arcin_v6(struct expansion_card *ec)
-{
- struct icside_state *state = ec->irq_data;
-
- return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
- readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v6 = {
- .irqenable = icside_irqenable_arcin_v6,
- .irqdisable = icside_irqdisable_arcin_v6,
- .irqpending = icside_irqpending_arcin_v6,
-};
-
-/*
- * Handle routing of interrupts. This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
- struct icside_state *state = ecard_get_drvdata(ec);
- unsigned long flags;
-
- local_irq_save(flags);
-
- state->channel = hwif->channel;
-
- if (state->enabled && !mask) {
- switch (hwif->channel) {
- case 0:
- writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
- break;
- case 1:
- writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- break;
- }
- } else {
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- }
-
- local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
- .maskproc = icside_maskproc,
-};
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
-/*
- * SG-DMA support.
- *
- * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
- * There is only one DMA controller per card, which means that only
- * one drive can be accessed at one time. NOTE! We do not enforce that
- * here, but we rely on the main IDE driver spotting that both
- * interfaces use the same IRQ, which should guarantee this.
- */
-
-/*
- * Configure the IOMD to give the appropriate timings for the transfer
- * mode being requested. We take the advice of the ATA standards, and
- * calculate the cycle time based on the transfer mode, and the EIDE
- * MW DMA specs that the drive provides in the IDENTIFY command.
- *
- * We have the following IOMD DMA modes to choose from:
- *
- * Type Active Recovery Cycle
- * A 250 (250) 312 (550) 562 (800)
- * B 187 250 437
- * C 125 (125) 125 (375) 250 (500)
- * D 62 125 187
- *
- * (figures in brackets are actual measured timings)
- *
- * However, we also need to take care of the read/write active and
- * recovery timings:
- *
- * Read Write
- * Mode Active -- Recovery -- Cycle IOMD type
- * MW0 215 50 215 480 A
- * MW1 80 50 50 150 C
- * MW2 70 25 25 120 C
- */
-static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long cycle_time = 0;
- int use_dma_info = 0;
- const u8 xfer_mode = drive->dma_mode;
-
- switch (xfer_mode) {
- case XFER_MW_DMA_2:
- cycle_time = 250;
- use_dma_info = 1;
- break;
-
- case XFER_MW_DMA_1:
- cycle_time = 250;
- use_dma_info = 1;
- break;
-
- case XFER_MW_DMA_0:
- cycle_time = 480;
- break;
-
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- cycle_time = 480;
- break;
- }
-
- /*
- * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
- * take care to note the values in the ID...
- */
- if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
- cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
-
- ide_set_drivedata(drive, (void *)cycle_time);
-
- printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
- drive->name, ide_xfer_verbose(xfer_mode),
- 2000 / (cycle_time ? cycle_time : (unsigned long) -1));
-}
-
-static const struct ide_port_ops icside_v6_port_ops = {
- .set_dma_mode = icside_set_dma_mode,
- .maskproc = icside_maskproc,
-};
-
-static void icside_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static int icside_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
-
- disable_dma(ec->dma);
-
- return get_dma_residue(ec->dma) != 0;
-}
-
-static void icside_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
-
- /* We can not enable DMA on both channels simultaneously. */
- BUG_ON(dma_channel_active(ec->dma));
- enable_dma(ec->dma);
-}
-
-static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
- struct icside_state *state = ecard_get_drvdata(ec);
- unsigned int dma_mode;
-
- if (cmd->tf_flags & IDE_TFLAG_WRITE)
- dma_mode = DMA_MODE_WRITE;
- else
- dma_mode = DMA_MODE_READ;
-
- /*
- * We can not enable DMA on both channels.
- */
- BUG_ON(dma_channel_active(ec->dma));
-
- /*
- * Ensure that we have the right interrupt routed.
- */
- icside_maskproc(drive, 0);
-
- /*
- * Route the DMA signals to the correct interface.
- */
- writeb(state->sel | hwif->channel, state->ioc_base);
-
- /*
- * Select the correct timing for this drive.
- */
- set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive));
-
- /*
- * Tell the DMA engine about the SG table and
- * data direction.
- */
- set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents);
- set_dma_mode(ec->dma, dma_mode);
-
- return 0;
-}
-
-static int icside_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
- struct icside_state *state = ecard_get_drvdata(ec);
-
- return readb(state->irq_port +
- (hwif->channel ?
- ICS_ARCIN_V6_INTRSTAT_2 :
- ICS_ARCIN_V6_INTRSTAT_1)) & 1;
-}
-
-static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- hwif->dmatable_cpu = NULL;
- hwif->dmatable_dma = 0;
-
- return 0;
-}
-
-static const struct ide_dma_ops icside_v6_dma_ops = {
- .dma_host_set = icside_dma_host_set,
- .dma_setup = icside_dma_setup,
- .dma_start = icside_dma_start,
- .dma_end = icside_dma_end,
- .dma_test_irq = icside_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
-};
-#endif
-
-static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- return -EOPNOTSUPP;
-}
-
-static void icside_setup_ports(struct ide_hw *hw, void __iomem *base,
- struct cardinfo *info, struct expansion_card *ec)
-{
- unsigned long port = (unsigned long)base + info->dataoffset;
-
- hw->io_ports.data_addr = port;
- hw->io_ports.error_addr = port + (1 << info->stepping);
- hw->io_ports.nsect_addr = port + (2 << info->stepping);
- hw->io_ports.lbal_addr = port + (3 << info->stepping);
- hw->io_ports.lbam_addr = port + (4 << info->stepping);
- hw->io_ports.lbah_addr = port + (5 << info->stepping);
- hw->io_ports.device_addr = port + (6 << info->stepping);
- hw->io_ports.status_addr = port + (7 << info->stepping);
- hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset;
-
- hw->irq = ec->irq;
- hw->dev = &ec->dev;
-}
-
-static const struct ide_port_info icside_v5_port_info = {
- .host_flags = IDE_HFLAG_NO_DMA,
- .chipset = ide_acorn,
-};
-
-static int icside_register_v5(struct icside_state *state,
- struct expansion_card *ec)
-{
- void __iomem *base;
- struct ide_host *host;
- struct ide_hw hw, *hws[] = { &hw };
- int ret;
-
- base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
- if (!base)
- return -ENOMEM;
-
- state->irq_port = base;
-
- ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
- ec->irqmask = 1;
-
- ecard_setirq(ec, &icside_ops_arcin_v5, state);
-
- /*
- * Be on the safe side - disable interrupts
- */
- icside_irqdisable_arcin_v5(ec, 0);
-
- icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
-
- host = ide_host_alloc(&icside_v5_port_info, hws, 1);
- if (host == NULL)
- return -ENODEV;
-
- state->host = host;
-
- ecard_set_drvdata(ec, state);
-
- ret = ide_host_register(host, &icside_v5_port_info, hws);
- if (ret)
- goto err_free;
-
- return 0;
-err_free:
- ide_host_free(host);
- ecard_set_drvdata(ec, NULL);
- return ret;
-}
-
-static const struct ide_port_info icside_v6_port_info = {
- .init_dma = icside_dma_off_init,
- .port_ops = &icside_v6_no_dma_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
- .mwdma_mask = ATA_MWDMA2,
- .swdma_mask = ATA_SWDMA2,
- .chipset = ide_acorn,
-};
-
-static int icside_register_v6(struct icside_state *state,
- struct expansion_card *ec)
-{
- void __iomem *ioc_base, *easi_base;
- struct ide_host *host;
- unsigned int sel = 0;
- int ret;
- struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] };
- struct ide_port_info d = icside_v6_port_info;
-
- ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
- if (!ioc_base) {
- ret = -ENOMEM;
- goto out;
- }
-
- easi_base = ioc_base;
-
- if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
- easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
- if (!easi_base) {
- ret = -ENOMEM;
- goto out;
- }
-
- /*
- * Enable access to the EASI region.
- */
- sel = 1 << 5;
- }
-
- writeb(sel, ioc_base);
-
- ecard_setirq(ec, &icside_ops_arcin_v6, state);
-
- state->irq_port = easi_base;
- state->ioc_base = ioc_base;
- state->sel = sel;
-
- /*
- * Be on the safe side - disable interrupts
- */
- icside_irqdisable_arcin_v6(ec, 0);
-
- icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
- icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
-
- host = ide_host_alloc(&d, hws, 2);
- if (host == NULL)
- return -ENODEV;
-
- state->host = host;
-
- ecard_set_drvdata(ec, state);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
- if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
- d.init_dma = icside_dma_init;
- d.port_ops = &icside_v6_port_ops;
- d.dma_ops = &icside_v6_dma_ops;
- }
-#endif
-
- ret = ide_host_register(host, &d, hws);
- if (ret)
- goto err_free;
-
- return 0;
-err_free:
- ide_host_free(host);
- if (d.dma_ops)
- free_dma(ec->dma);
- ecard_set_drvdata(ec, NULL);
-out:
- return ret;
-}
-
-static int icside_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
- struct icside_state *state;
- void __iomem *idmem;
- int ret;
-
- ret = ecard_request_resources(ec);
- if (ret)
- goto out;
-
- state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
- if (!state) {
- ret = -ENOMEM;
- goto release;
- }
-
- state->type = ICS_TYPE_NOTYPE;
-
- idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
- if (idmem) {
- unsigned int type;
-
- type = readb(idmem + ICS_IDENT_OFFSET) & 1;
- type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
- type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
- type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
- ecardm_iounmap(ec, idmem);
-
- state->type = type;
- }
-
- switch (state->type) {
- case ICS_TYPE_A3IN:
- dev_warn(&ec->dev, "A3IN unsupported\n");
- ret = -ENODEV;
- break;
-
- case ICS_TYPE_A3USER:
- dev_warn(&ec->dev, "A3USER unsupported\n");
- ret = -ENODEV;
- break;
-
- case ICS_TYPE_V5:
- ret = icside_register_v5(state, ec);
- break;
-
- case ICS_TYPE_V6:
- ret = icside_register_v6(state, ec);
- break;
-
- default:
- dev_warn(&ec->dev, "unknown interface type\n");
- ret = -ENODEV;
- break;
- }
-
- if (ret == 0)
- goto out;
-
- kfree(state);
- release:
- ecard_release_resources(ec);
- out:
- return ret;
-}
-
-static void icside_remove(struct expansion_card *ec)
-{
- struct icside_state *state = ecard_get_drvdata(ec);
-
- switch (state->type) {
- case ICS_TYPE_V5:
- /* FIXME: tell IDE to stop using the interface */
-
- /* Disable interrupts */
- icside_irqdisable_arcin_v5(ec, 0);
- break;
-
- case ICS_TYPE_V6:
- /* FIXME: tell IDE to stop using the interface */
- if (ec->dma != NO_DMA)
- free_dma(ec->dma);
-
- /* Disable interrupts */
- icside_irqdisable_arcin_v6(ec, 0);
-
- /* Reset the ROM pointer/EASI selection */
- writeb(0, state->ioc_base);
- break;
- }
-
- ecard_set_drvdata(ec, NULL);
-
- kfree(state);
- ecard_release_resources(ec);
-}
-
-static void icside_shutdown(struct expansion_card *ec)
-{
- struct icside_state *state = ecard_get_drvdata(ec);
- unsigned long flags;
-
- /*
- * Disable interrupts from this card. We need to do
- * this before disabling EASI since we may be accessing
- * this register via that region.
- */
- local_irq_save(flags);
- ec->ops->irqdisable(ec, 0);
- local_irq_restore(flags);
-
- /*
- * Reset the ROM pointer so that we can read the ROM
- * after a soft reboot. This also disables access to
- * the IDE taskfile via the EASI region.
- */
- if (state->ioc_base)
- writeb(0, state->ioc_base);
-}
-
-static const struct ecard_id icside_ids[] = {
- { MANU_ICS, PROD_ICS_IDE },
- { MANU_ICS2, PROD_ICS2_IDE },
- { 0xffff, 0xffff }
-};
-
-static struct ecard_driver icside_driver = {
- .probe = icside_probe,
- .remove = icside_remove,
- .shutdown = icside_shutdown,
- .id_table = icside_ids,
- .drv = {
- .name = "icside",
- },
-};
-
-static int __init icside_init(void)
-{
- return ecard_register_driver(&icside_driver);
-}
-
-static void __exit icside_exit(void)
-{
- ecard_remove_driver(&icside_driver);
-}
-
-MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("ICS IDE driver");
-
-module_init(icside_init);
-module_exit(icside_exit);
projects / linux-2.6-block.git / blobdiff