+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
- * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
- * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
- *
- * CYPRESS CY82C693 chipset IDE controller
- *
- * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cy82c693"
-
-/*
- * NOTE: the value for busmaster timeout is tricky and I got it by
- * trial and error! By using a to low value will cause DMA timeouts
- * and drop IDE performance, and by using a to high value will cause
- * audio playback to scatter.
- * If you know a better value or how to calc it, please let me know.
- */
-
-/* twice the value written in cy82c693ub datasheet */
-#define BUSMASTER_TIMEOUT 0x50
-/*
- * the value above was tested on my machine and it seems to work okay
- */
-
-/* here are the offset definitions for the registers */
-#define CY82_IDE_CMDREG 0x04
-#define CY82_IDE_ADDRSETUP 0x48
-#define CY82_IDE_MASTER_IOR 0x4C
-#define CY82_IDE_MASTER_IOW 0x4D
-#define CY82_IDE_SLAVE_IOR 0x4E
-#define CY82_IDE_SLAVE_IOW 0x4F
-#define CY82_IDE_MASTER_8BIT 0x50
-#define CY82_IDE_SLAVE_8BIT 0x51
-
-#define CY82_INDEX_PORT 0x22
-#define CY82_DATA_PORT 0x23
-
-#define CY82_INDEX_CHANNEL0 0x30
-#define CY82_INDEX_CHANNEL1 0x31
-#define CY82_INDEX_TIMEOUT 0x32
-
-/*
- * set DMA mode a specific channel for CY82C693
- */
-
-static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 mode = drive->dma_mode;
- u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
-
- index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
-
- data = (mode & 3) | (single << 2);
-
- outb(index, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-
- /*
- * note: below we set the value for Bus Master IDE TimeOut Register
- * I'm not absolutely sure what this does, but it solved my problem
- * with IDE DMA and sound, so I now can play sound and work with
- * my IDE driver at the same time :-)
- *
- * If you know the correct (best) value for this register please
- * let me know - ASK
- */
-
- data = BUSMASTER_TIMEOUT;
- outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-}
-
-static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- const unsigned long T = 1000000 / bus_speed;
- unsigned int addrCtrl;
- struct ide_timing t;
- u8 time_16, time_8;
-
- /* select primary or secondary channel */
- if (drive->dn > 1) { /* drive is on the secondary channel */
- dev = pci_get_slot(dev->bus, dev->devfn+1);
- if (!dev) {
- printk(KERN_ERR "%s: tune_drive: "
- "Cannot find secondary interface!\n",
- drive->name);
- return;
- }
- }
-
- ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
-
- time_16 = clamp_val(t.recover - 1, 0, 15) |
- (clamp_val(t.active - 1, 0, 15) << 4);
- time_8 = clamp_val(t.act8b - 1, 0, 15) |
- (clamp_val(t.rec8b - 1, 0, 15) << 4);
-
- /* now let's write the clocks registers */
- if ((drive->dn & 1) == 0) {
- /*
- * set master drive
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= (~0xF);
- addrCtrl |= clamp_val(t.setup - 1, 0, 15);
- pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
- /* now let's set the remaining registers */
- pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
- pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
- pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
- } else {
- /*
- * set slave drive
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= (~0xF0);
- addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
- pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
- /* now let's set the remaining registers */
- pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
- pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
- pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
- }
- if (drive->dn > 1)
- pci_dev_put(dev);
-}
-
-static void init_iops_cy82c693(ide_hwif_t *hwif)
-{
- static ide_hwif_t *primary;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (PCI_FUNC(dev->devfn) == 1)
- primary = hwif;
- else {
- hwif->mate = primary;
- hwif->channel = 1;
- }
-}
-
-static const struct ide_port_ops cy82c693_port_ops = {
- .set_pio_mode = cy82c693_set_pio_mode,
- .set_dma_mode = cy82c693_set_dma_mode,
-};
-
-static const struct ide_port_info cy82c693_chipset = {
- .name = DRV_NAME,
- .init_iops = init_iops_cy82c693,
- .port_ops = &cy82c693_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int cy82c693_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- struct pci_dev *dev2;
- int ret = -ENODEV;
-
- /* CY82C693 is more than only a IDE controller.
- Function 1 is primary IDE channel, function 2 - secondary. */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
- PCI_FUNC(dev->devfn) == 1) {
- dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
- ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
- if (ret)
- pci_dev_put(dev2);
- }
- return ret;
-}
-
-static void cy82c693_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
-}
-
-static const struct pci_device_id cy82c693_pci_tbl[] = {
- { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
-
-static struct pci_driver cy82c693_pci_driver = {
- .name = "Cypress_IDE",
- .id_table = cy82c693_pci_tbl,
- .probe = cy82c693_init_one,
- .remove = cy82c693_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cy82c693_ide_init(void)
-{
- return ide_pci_register_driver(&cy82c693_pci_driver);
-}
-
-static void __exit cy82c693_ide_exit(void)
-{
- pci_unregister_driver(&cy82c693_pci_driver);
-}
-
-module_init(cy82c693_ide_init);
-module_exit(cy82c693_ide_exit);
-
-MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
-MODULE_LICENSE("GPL");
projects / linux-block.git / blobdiff