enum i3c_addr_slot_status status;
int ret;
- if (dev->info.dyn_addr != old_dyn_addr) {
+ if (dev->info.dyn_addr != old_dyn_addr &&
+ (!dev->boardinfo ||
+ dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) {
status = i3c_bus_get_addr_slot_status(&master->bus,
dev->info.dyn_addr);
if (status != I3C_ADDR_SLOT_FREE)
master->ops->detach_i2c_dev(dev);
}
-static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
+static int i3c_master_early_i3c_dev_add(struct i3c_master_controller *master,
+ struct i3c_dev_boardinfo *boardinfo)
{
- struct i3c_master_controller *master = i3c_dev_get_master(dev);
+ struct i3c_device_info info = {
+ .static_addr = boardinfo->static_addr,
+ };
+ struct i3c_dev_desc *i3cdev;
int ret;
- if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
- !dev->boardinfo->static_addr)
- return;
+ i3cdev = i3c_master_alloc_i3c_dev(master, &info);
+ if (IS_ERR(i3cdev))
+ return -ENOMEM;
+
+ i3cdev->boardinfo = boardinfo;
+
+ ret = i3c_master_attach_i3c_dev(master, i3cdev);
+ if (ret)
+ goto err_free_dev;
- ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
- dev->boardinfo->init_dyn_addr);
+ ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
+ i3cdev->boardinfo->init_dyn_addr);
if (ret)
- return;
+ goto err_detach_dev;
- dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
- ret = i3c_master_reattach_i3c_dev(dev, 0);
+ i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
+ ret = i3c_master_reattach_i3c_dev(i3cdev, 0);
if (ret)
goto err_rstdaa;
- ret = i3c_master_retrieve_dev_info(dev);
+ ret = i3c_master_retrieve_dev_info(i3cdev);
if (ret)
goto err_rstdaa;
- return;
+ return 0;
err_rstdaa:
- i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
+ i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
+err_detach_dev:
+ i3c_master_detach_i3c_dev(i3cdev);
+err_free_dev:
+ i3c_master_free_i3c_dev(i3cdev);
+
+ return ret;
}
static void
* This function is following all initialisation steps described in the I3C
* specification:
*
- * 1. Attach I2C and statically defined I3C devs to the master so that the
- * master can fill its internal device table appropriately
+ * 1. Attach I2C devs to the master so that the master can fill its internal
+ * device table appropriately
*
* 2. Call &i3c_master_controller_ops->bus_init() method to initialize
* the master controller. That's usually where the bus mode is selected
*
* 4. Disable all slave events.
*
- * 5. Pre-assign dynamic addresses requested by the FW with SETDASA for I3C
- * devices that have a static address
+ * 5. Reserve address slots for I3C devices with init_dyn_addr. And if devices
+ * also have static_addr, try to pre-assign dynamic addresses requested by
+ * the FW with SETDASA and attach corresponding statically defined I3C
+ * devices to the master.
*
* 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
* remaining I3C devices
enum i3c_addr_slot_status status;
struct i2c_dev_boardinfo *i2cboardinfo;
struct i3c_dev_boardinfo *i3cboardinfo;
- struct i3c_dev_desc *i3cdev;
struct i2c_dev_desc *i2cdev;
int ret;
goto err_detach_devs;
}
}
- list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
- struct i3c_device_info info = {
- .static_addr = i3cboardinfo->static_addr,
- };
-
- if (i3cboardinfo->init_dyn_addr) {
- status = i3c_bus_get_addr_slot_status(&master->bus,
- i3cboardinfo->init_dyn_addr);
- if (status != I3C_ADDR_SLOT_FREE) {
- ret = -EBUSY;
- goto err_detach_devs;
- }
- }
-
- i3cdev = i3c_master_alloc_i3c_dev(master, &info);
- if (IS_ERR(i3cdev)) {
- ret = PTR_ERR(i3cdev);
- goto err_detach_devs;
- }
-
- i3cdev->boardinfo = i3cboardinfo;
-
- ret = i3c_master_attach_i3c_dev(master, i3cdev);
- if (ret) {
- i3c_master_free_i3c_dev(i3cdev);
- goto err_detach_devs;
- }
- }
/*
* Now execute the controller specific ->bus_init() routine, which
goto err_bus_cleanup;
/*
- * Pre-assign dynamic address and retrieve device information if
- * needed.
+ * Reserve init_dyn_addr first, and then try to pre-assign dynamic
+ * address and retrieve device information if needed.
+ * In case pre-assign dynamic address fails, setting dynamic address to
+ * the requested init_dyn_addr is retried after DAA is done in
+ * i3c_master_add_i3c_dev_locked().
*/
- i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
- i3c_master_pre_assign_dyn_addr(i3cdev);
+ list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
+
+ /*
+ * We don't reserve a dynamic address for devices that
+ * don't explicitly request one.
+ */
+ if (!i3cboardinfo->init_dyn_addr)
+ continue;
+
+ ret = i3c_bus_get_addr_slot_status(&master->bus,
+ i3cboardinfo->init_dyn_addr);
+ if (ret != I3C_ADDR_SLOT_FREE) {
+ ret = -EBUSY;
+ goto err_rstdaa;
+ }
+
+ i3c_bus_set_addr_slot_status(&master->bus,
+ i3cboardinfo->init_dyn_addr,
+ I3C_ADDR_SLOT_I3C_DEV);
+
+ /*
+ * Only try to create/attach devices that have a static
+ * address. Other devices will be created/attached when
+ * DAA happens, and the requested dynamic address will
+ * be set using SETNEWDA once those devices become
+ * addressable.
+ */
+
+ if (i3cboardinfo->static_addr)
+ i3c_master_early_i3c_dev_add(master, i3cboardinfo);
+ }
ret = i3c_master_do_daa(master);
if (ret)
i3c_master_detach_free_devs(master);
}
+static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
+{
+ struct i3c_master_controller *master = i3cdev->common.master;
+ struct i3c_dev_boardinfo *i3cboardinfo;
+
+ list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
+ if (i3cdev->info.pid != i3cboardinfo->pid)
+ continue;
+
+ i3cdev->boardinfo = i3cboardinfo;
+ i3cdev->info.static_addr = i3cboardinfo->static_addr;
+ return;
+ }
+}
+
static struct i3c_dev_desc *
i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
{
if (ret)
goto err_detach_dev;
+ i3c_master_attach_boardinfo(newdev);
+
olddev = i3c_master_search_i3c_dev_duplicate(newdev);
if (olddev) {
- newdev->boardinfo = olddev->boardinfo;
- newdev->info.static_addr = olddev->info.static_addr;
newdev->dev = olddev->dev;
if (newdev->dev)
newdev->dev->desc = newdev;
projects / linux-block.git / blobdiff