A3XX_INT0_CP_AHB_ERROR_HALT | \
A3XX_INT0_UCHE_OOB_ACCESS)
-static struct platform_device *a3xx_pdev;
+
+static bool hang_debug = false;
+MODULE_PARM_DESC(hang_debug, "Dump registers when hang is detected (can be slow!)");
+module_param_named(hang_debug, hang_debug, bool, 0600);
+static void a3xx_dump(struct msm_gpu *gpu);
static void a3xx_me_init(struct msm_gpu *gpu)
{
static void a3xx_recover(struct msm_gpu *gpu)
{
+ /* dump registers before resetting gpu, if enabled: */
+ if (hang_debug)
+ a3xx_dump(gpu);
gpu_write(gpu, REG_A3XX_RBBM_SW_RESET_CMD, 1);
gpu_read(gpu, REG_A3XX_RBBM_SW_RESET_CMD);
gpu_write(gpu, REG_A3XX_RBBM_SW_RESET_CMD, 0);
ocmem_free(OCMEM_GRAPHICS, a3xx_gpu->ocmem_hdl);
#endif
- put_device(&a3xx_gpu->pdev->dev);
kfree(a3xx_gpu);
}
static void a3xx_idle(struct msm_gpu *gpu)
{
- unsigned long t;
-
/* wait for ringbuffer to drain: */
adreno_idle(gpu);
- t = jiffies + ADRENO_IDLE_TIMEOUT;
-
/* then wait for GPU to finish: */
- do {
- uint32_t rbbm_status = gpu_read(gpu, REG_A3XX_RBBM_STATUS);
- if (!(rbbm_status & A3XX_RBBM_STATUS_GPU_BUSY))
- return;
- } while(time_before(jiffies, t));
-
- DRM_ERROR("timeout waiting for %s to idle!\n", gpu->name);
+ if (spin_until(!(gpu_read(gpu, REG_A3XX_RBBM_STATUS) &
+ A3XX_RBBM_STATUS_GPU_BUSY)))
+ DRM_ERROR("%s: timeout waiting for GPU to idle!\n", gpu->name);
/* TODO maybe we need to reset GPU here to recover from hang? */
}
return IRQ_HANDLED;
}
-#ifdef CONFIG_DEBUG_FS
static const unsigned int a3xx_registers[] = {
0x0000, 0x0002, 0x0010, 0x0012, 0x0018, 0x0018, 0x0020, 0x0027,
0x0029, 0x002b, 0x002e, 0x0033, 0x0040, 0x0042, 0x0050, 0x005c,
0x303c, 0x303c, 0x305e, 0x305f,
};
+#ifdef CONFIG_DEBUG_FS
static void a3xx_show(struct msm_gpu *gpu, struct seq_file *m)
{
+ struct drm_device *dev = gpu->dev;
int i;
adreno_show(gpu, m);
+
+ mutex_lock(&dev->struct_mutex);
+
+ gpu->funcs->pm_resume(gpu);
+
seq_printf(m, "status: %08x\n",
gpu_read(gpu, REG_A3XX_RBBM_STATUS));
seq_printf(m, "IO:R %08x %08x\n", addr<<2, val);
}
}
+
+ gpu->funcs->pm_suspend(gpu);
+
+ mutex_unlock(&dev->struct_mutex);
}
#endif
+/* would be nice to not have to duplicate the _show() stuff with printk(): */
+static void a3xx_dump(struct msm_gpu *gpu)
+{
+ int i;
+
+ adreno_dump(gpu);
+ printk("status: %08x\n",
+ gpu_read(gpu, REG_A3XX_RBBM_STATUS));
+
+ /* dump these out in a form that can be parsed by demsm: */
+ printk("IO:region %s 00000000 00020000\n", gpu->name);
+ for (i = 0; i < ARRAY_SIZE(a3xx_registers); i += 2) {
+ uint32_t start = a3xx_registers[i];
+ uint32_t end = a3xx_registers[i+1];
+ uint32_t addr;
+
+ for (addr = start; addr <= end; addr++) {
+ uint32_t val = gpu_read(gpu, addr);
+ printk("IO:R %08x %08x\n", addr<<2, val);
+ }
+ }
+}
+
static const struct adreno_gpu_funcs funcs = {
.base = {
.get_param = adreno_get_param,
struct a3xx_gpu *a3xx_gpu = NULL;
struct adreno_gpu *adreno_gpu;
struct msm_gpu *gpu;
- struct platform_device *pdev = a3xx_pdev;
+ struct msm_drm_private *priv = dev->dev_private;
+ struct platform_device *pdev = priv->gpu_pdev;
struct adreno_platform_config *config;
int ret;
adreno_gpu = &a3xx_gpu->base;
gpu = &adreno_gpu->base;
- get_device(&pdev->dev);
a3xx_gpu->pdev = pdev;
gpu->fast_rate = config->fast_rate;
# include <mach/kgsl.h>
#endif
-static int a3xx_probe(struct platform_device *pdev)
+static void set_gpu_pdev(struct drm_device *dev,
+ struct platform_device *pdev)
+{
+ struct msm_drm_private *priv = dev->dev_private;
+ priv->gpu_pdev = pdev;
+}
+
+static int a3xx_bind(struct device *dev, struct device *master, void *data)
{
static struct adreno_platform_config config = {};
#ifdef CONFIG_OF
- struct device_node *child, *node = pdev->dev.of_node;
+ struct device_node *child, *node = dev->of_node;
u32 val;
int ret;
ret = of_property_read_u32(node, "qcom,chipid", &val);
if (ret) {
- dev_err(&pdev->dev, "could not find chipid: %d\n", ret);
+ dev_err(dev, "could not find chipid: %d\n", ret);
return ret;
}
for_each_child_of_node(child, pwrlvl) {
ret = of_property_read_u32(pwrlvl, "qcom,gpu-freq", &val);
if (ret) {
- dev_err(&pdev->dev, "could not find gpu-freq: %d\n", ret);
+ dev_err(dev, "could not find gpu-freq: %d\n", ret);
return ret;
}
config.fast_rate = max(config.fast_rate, val);
}
if (!config.fast_rate) {
- dev_err(&pdev->dev, "could not find clk rates\n");
+ dev_err(dev, "could not find clk rates\n");
return -ENXIO;
}
#else
- struct kgsl_device_platform_data *pdata = pdev->dev.platform_data;
+ struct kgsl_device_platform_data *pdata = dev->platform_data;
uint32_t version = socinfo_get_version();
if (cpu_is_apq8064ab()) {
config.fast_rate = 450000000;
config.bus_scale_table = pdata->bus_scale_table;
# endif
#endif
- pdev->dev.platform_data = &config;
- a3xx_pdev = pdev;
+ dev->platform_data = &config;
+ set_gpu_pdev(dev_get_drvdata(master), to_platform_device(dev));
return 0;
}
+static void a3xx_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ set_gpu_pdev(dev_get_drvdata(master), NULL);
+}
+
+static const struct component_ops a3xx_ops = {
+ .bind = a3xx_bind,
+ .unbind = a3xx_unbind,
+};
+
+static int a3xx_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &a3xx_ops);
+}
+
static int a3xx_remove(struct platform_device *pdev)
{
- a3xx_pdev = NULL;
+ component_del(&pdev->dev, &a3xx_ops);
return 0;
}
{ .compatible = "qcom,kgsl-3d0" },
{}
};
-MODULE_DEVICE_TABLE(of, dt_match);
static struct platform_driver a3xx_driver = {
.probe = a3xx_probe,
projects / linux-2.6-block.git / blobdiff