return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
+/* hrawclock is 1/4 the FSB frequency */
+int intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
+ if (IS_VALLEYVIEW(dev))
+ return 200;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
}
}
-/*
- * ibx_digital_port_connected - is the specified port connected?
- * @dev_priv: i915 private structure
- * @port: the port to test
- *
- * Returns true if @port is connected, false otherwise.
- */
-bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
- struct intel_digital_port *port)
-{
- u32 bit;
-
- if (HAS_PCH_IBX(dev_priv->dev)) {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG;
- break;
- default:
- return true;
- }
- } else {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG_CPT;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG_CPT;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG_CPT;
- break;
- case PORT_E:
- bit = SDE_PORTE_HOTPLUG_SPT;
- break;
- default:
- return true;
- }
- }
-
- return I915_READ(SDEISR) & bit;
-}
-
static const char *state_string(bool enabled)
{
return enabled ? "on" : "off";
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
}
-static void intel_init_dpio(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (!IS_VALLEYVIEW(dev))
- return;
-
- /*
- * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
- * CHV x1 PHY (DP/HDMI D)
- * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
- */
- if (IS_CHERRYVIEW(dev)) {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
- DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
- } else {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
- }
-}
-
static void vlv_enable_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config)
{
val &= ~DPIO_DCLKP_EN;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
- /* disable left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
mutex_unlock(&dev_priv->sb_lock);
}
I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
- DRM_DEBUG_KMS("CRTC:%d Disabled scaler id %u.%u\n",
- intel_crtc->base.base.id, intel_crtc->pipe, id);
}
/*
modeset_put_power_domains(dev_priv, put_domains[i]);
}
+static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
+{
+ int max_cdclk_freq = dev_priv->max_cdclk_freq;
+
+ if (INTEL_INFO(dev_priv)->gen >= 9 ||
+ IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+ return max_cdclk_freq;
+ else if (IS_CHERRYVIEW(dev_priv))
+ return max_cdclk_freq*95/100;
+ else if (INTEL_INFO(dev_priv)->gen < 4)
+ return 2*max_cdclk_freq*90/100;
+ else
+ return max_cdclk_freq*90/100;
+}
+
static void intel_update_max_cdclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
}
+ dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
+
DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
dev_priv->max_cdclk_freq);
+
+ DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
+ dev_priv->max_dotclk_freq);
}
static void intel_update_cdclk(struct drm_device *dev)
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
- if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
- chv_prepare_pll(intel_crtc, intel_crtc->config);
- else
- vlv_prepare_pll(intel_crtc, intel_crtc->config);
- }
-
if (intel_crtc->config->has_dp_encoder)
intel_dp_set_m_n(intel_crtc, M1_N1);
encoder->pre_pll_enable(encoder);
if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
+ if (IS_CHERRYVIEW(dev)) {
+ chv_prepare_pll(intel_crtc, intel_crtc->config);
chv_enable_pll(intel_crtc, intel_crtc->config);
- else
+ } else {
+ vlv_prepare_pll(intel_crtc, intel_crtc->config);
vlv_enable_pll(intel_crtc, intel_crtc->config);
+ }
}
for_each_encoder_on_crtc(dev, crtc, encoder)
i9xx_disable_pll(intel_crtc);
}
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->post_pll_disable)
+ encoder->post_pll_disable(encoder);
+
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
1 << DPIO_CHV_N_DIV_SHIFT);
/* M2 fraction division */
- if (bestm2_frac)
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
/* M2 fraction division enable */
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
else
i9xx_crtc_clock_get(crtc, pipe_config);
+ /*
+ * Normally the dotclock is filled in by the encoder .get_config()
+ * but in case the pipe is enabled w/o any ports we need a sane
+ * default.
+ */
+ pipe_config->base.adjusted_mode.crtc_clock =
+ pipe_config->port_clock / pipe_config->pixel_multiplier;
+
return true;
}
DERRMR_PIPEB_PRI_FLIP_DONE |
DERRMR_PIPEC_PRI_FLIP_DONE));
if (IS_GEN8(dev))
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8 |
MI_SRM_LRM_GLOBAL_GTT);
else
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM |
MI_SRM_LRM_GLOBAL_GTT);
intel_ring_emit(ring, DERRMR);
intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
- u32 start_vbl_count;
intel_mark_page_flip_active(intel_crtc);
- intel_pipe_update_start(intel_crtc, &start_vbl_count);
+ intel_pipe_update_start(intel_crtc);
if (INTEL_INFO(dev)->gen >= 9)
skl_do_mmio_flip(intel_crtc);
/* use_mmio_flip() retricts MMIO flips to ilk+ */
ilk_do_mmio_flip(intel_crtc);
- intel_pipe_update_end(intel_crtc, start_vbl_count);
+ intel_pipe_update_end(intel_crtc);
}
static void intel_mmio_flip_work_func(struct work_struct *work)
if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
return true;
+ if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
+ return false;
+
if (!work->enable_stall_check)
return false;
intel_crtc->atomic.update_wm_pre = true;
}
- if (visible)
+ if (visible || was_visible)
intel_crtc->atomic.fb_bits |=
to_intel_plane(plane)->frontbuffer_bit;
pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
pipe_config->fdi_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
pipe_config->dp_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m2_n2.gmch_m,
pipe_config->dp_m2_n2.gmch_n,
pipe_config->dp_m2_n2.link_m,
PIPE_CONF_CHECK_M_N(fdi_m_n);
PIPE_CONF_CHECK_I(has_dp_encoder);
+ PIPE_CONF_CHECK_I(lane_count);
if (INTEL_INFO(dev)->gen < 8) {
PIPE_CONF_CHECK_M_N(dp_m_n);
/* Perform vblank evasion around commit operation */
if (crtc->state->active)
- intel_pipe_update_start(intel_crtc, &intel_crtc->start_vbl_count);
+ intel_pipe_update_start(intel_crtc);
if (!needs_modeset(crtc->state) && INTEL_INFO(dev)->gen >= 9)
skl_detach_scalers(intel_crtc);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
if (crtc->state->active)
- intel_pipe_update_end(intel_crtc, intel_crtc->start_vbl_count);
+ intel_pipe_update_end(intel_crtc);
}
/**
}
}
- intel_init_dpio(dev);
-
intel_shared_dpll_init(dev);
/* Just disable it once at startup */
return true;
}
+static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct intel_encoder *encoder;
+
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ return true;
+
+ return false;
+}
+
static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
u32 reg;
- bool enable;
/* Clear any frame start delays used for debugging left by the BIOS */
reg = PIPECONF(crtc->config->cpu_transcoder);
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
- enable = false;
- for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
- enable = true;
- break;
- }
-
- if (!enable)
+ if (!intel_crtc_has_encoders(crtc))
intel_crtc_disable_noatomic(&crtc->base);
if (crtc->active != crtc->base.state->active) {
+ struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
* functions or because of calls to intel_crtc_disable_noatomic,
projects / linux-2.6-block.git / blobdiff