DRM_FORMAT_ABGR8888,
DRM_FORMAT_XRGB2101010,
DRM_FORMAT_XBGR2101010,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
};
/* Cursor formats */
struct intel_crtc_state *crtc_state);
static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
int num_connectors);
+static void skylake_pfit_enable(struct intel_crtc *crtc);
+static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
+static void ironlake_pfit_enable(struct intel_crtc *crtc);
static void intel_modeset_setup_hw_state(struct drm_device *dev);
typedef struct {
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
+/* hrawclock is 1/4 the FSB frequency */
+int intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
+ if (IS_VALLEYVIEW(dev))
+ return 200;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
}
}
-/*
- * ibx_digital_port_connected - is the specified port connected?
- * @dev_priv: i915 private structure
- * @port: the port to test
- *
- * Returns true if @port is connected, false otherwise.
- */
-bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
- struct intel_digital_port *port)
-{
- u32 bit;
-
- if (HAS_PCH_IBX(dev_priv->dev)) {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG;
- break;
- default:
- return true;
- }
- } else {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG_CPT;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG_CPT;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG_CPT;
- break;
- case PORT_E:
- bit = SDE_PORTE_HOTPLUG_SPT;
- break;
- default:
- return true;
- }
- }
-
- return I915_READ(SDEISR) & bit;
-}
-
static const char *state_string(bool enabled)
{
return enabled ? "on" : "off";
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
}
-static void intel_init_dpio(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (!IS_VALLEYVIEW(dev))
- return;
-
- /*
- * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
- * CHV x1 PHY (DP/HDMI D)
- * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
- */
- if (IS_CHERRYVIEW(dev)) {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
- DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
- } else {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
- }
-}
-
static void vlv_enable_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config)
{
val &= ~DPIO_DCLKP_EN;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
- /* disable left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
mutex_unlock(&dev_priv->sb_lock);
}
unsigned int
intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
- uint64_t fb_format_modifier)
+ uint64_t fb_format_modifier, unsigned int plane)
{
unsigned int tile_height;
uint32_t pixel_bytes;
tile_height = 32;
break;
case I915_FORMAT_MOD_Yf_TILED:
- pixel_bytes = drm_format_plane_cpp(pixel_format, 0);
+ pixel_bytes = drm_format_plane_cpp(pixel_format, plane);
switch (pixel_bytes) {
default:
case 1:
uint32_t pixel_format, uint64_t fb_format_modifier)
{
return ALIGN(height, intel_tile_height(dev, pixel_format,
- fb_format_modifier));
+ fb_format_modifier, 0));
}
static int
info->height = fb->height;
info->pixel_format = fb->pixel_format;
info->pitch = fb->pitches[0];
+ info->uv_offset = fb->offsets[1];
info->fb_modifier = fb->modifier[0];
tile_height = intel_tile_height(fb->dev, fb->pixel_format,
- fb->modifier[0]);
+ fb->modifier[0], 0);
tile_pitch = PAGE_SIZE / tile_height;
info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
info->size = info->width_pages * info->height_pages * PAGE_SIZE;
+ if (info->pixel_format == DRM_FORMAT_NV12) {
+ tile_height = intel_tile_height(fb->dev, fb->pixel_format,
+ fb->modifier[0], 1);
+ tile_pitch = PAGE_SIZE / tile_height;
+ info->width_pages_uv = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
+ info->height_pages_uv = DIV_ROUND_UP(fb->height / 2,
+ tile_height);
+ info->size_uv = info->width_pages_uv * info->height_pages_uv *
+ PAGE_SIZE;
+ }
+
return 0;
}
(intel_crtc->config->pipe_src_w - 1) * pixel_size;
}
+ intel_crtc->adjusted_x = x;
+ intel_crtc->adjusted_y = y;
+
I915_WRITE(reg, dspcntr);
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
}
}
+ intel_crtc->adjusted_x = x;
+ intel_crtc->adjusted_y = y;
+
I915_WRITE(reg, dspcntr);
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
}
unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ unsigned int plane)
{
const struct i915_ggtt_view *view = &i915_ggtt_view_normal;
+ struct i915_vma *vma;
+ unsigned char *offset;
if (intel_rotation_90_or_270(intel_plane->base.state->rotation))
view = &i915_ggtt_view_rotated;
- return i915_gem_obj_ggtt_offset_view(obj, view);
+ vma = i915_gem_obj_to_ggtt_view(obj, view);
+ if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
+ view->type))
+ return -1;
+
+ offset = (unsigned char *)vma->node.start;
+
+ if (plane == 1) {
+ offset += vma->ggtt_view.rotation_info.uv_start_page *
+ PAGE_SIZE;
+ }
+
+ return (unsigned long)offset;
}
static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
- DRM_DEBUG_KMS("CRTC:%d Disabled scaler id %u.%u\n",
- intel_crtc->base.base.id, intel_crtc->pipe, id);
}
/*
obj = intel_fb_obj(fb);
stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
fb->pixel_format);
- surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj);
+ surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
/*
* FIXME: intel_plane_state->src, dst aren't set when transitional
if (intel_rotation_90_or_270(rotation)) {
/* stride = Surface height in tiles */
tile_height = intel_tile_height(dev, fb->pixel_format,
- fb->modifier[0]);
+ fb->modifier[0], 0);
stride = DIV_ROUND_UP(fb->height, tile_height);
x_offset = stride * tile_height - y - src_h;
y_offset = x;
}
plane_offset = y_offset << 16 | x_offset;
+ intel_crtc->adjusted_x = x_offset;
+ intel_crtc->adjusted_y = y_offset;
+
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
static void intel_update_primary_planes(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
for_each_crtc(dev, crtc) {
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_plane *plane = to_intel_plane(crtc->primary);
+ struct intel_plane_state *plane_state;
- drm_modeset_lock(&crtc->mutex, NULL);
- /*
- * FIXME: Once we have proper support for primary planes (and
- * disabling them without disabling the entire crtc) allow again
- * a NULL crtc->primary->fb.
- */
- if (intel_crtc->active && crtc->primary->fb)
- dev_priv->display.update_primary_plane(crtc,
- crtc->primary->fb,
- crtc->x,
- crtc->y);
- drm_modeset_unlock(&crtc->mutex);
+ drm_modeset_lock_crtc(crtc, &plane->base);
+
+ plane_state = to_intel_plane_state(plane->base.state);
+
+ if (plane_state->base.fb)
+ plane->commit_plane(&plane->base, plane_state);
+
+ drm_modeset_unlock_crtc(crtc);
}
}
* so update the base address of all primary
* planes to the the last fb to make sure we're
* showing the correct fb after a reset.
+ *
+ * FIXME: Atomic will make this obsolete since we won't schedule
+ * CS-based flips (which might get lost in gpu resets) any more.
*/
intel_update_primary_planes(dev);
return;
return pending;
}
-static void intel_update_pipe_size(struct intel_crtc *crtc)
+static void intel_update_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_state *old_crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- const struct drm_display_mode *adjusted_mode;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->base.state);
- if (!i915.fastboot)
- return;
+ /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
+ crtc->base.mode = crtc->base.state->mode;
+
+ DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
+ old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
+ pipe_config->pipe_src_w, pipe_config->pipe_src_h);
+
+ if (HAS_DDI(dev))
+ intel_set_pipe_csc(&crtc->base);
/*
* Update pipe size and adjust fitter if needed: the reason for this is
* fastboot case, we'll flip, but if we don't update the pipesrc and
* pfit state, we'll end up with a big fb scanned out into the wrong
* sized surface.
- *
- * To fix this properly, we need to hoist the checks up into
- * compute_mode_changes (or above), check the actual pfit state and
- * whether the platform allows pfit disable with pipe active, and only
- * then update the pipesrc and pfit state, even on the flip path.
*/
- adjusted_mode = &crtc->config->base.adjusted_mode;
-
I915_WRITE(PIPESRC(crtc->pipe),
- ((adjusted_mode->crtc_hdisplay - 1) << 16) |
- (adjusted_mode->crtc_vdisplay - 1));
- if (!crtc->config->pch_pfit.enabled &&
- (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
- I915_WRITE(PF_CTL(crtc->pipe), 0);
- I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
- I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
+ ((pipe_config->pipe_src_w - 1) << 16) |
+ (pipe_config->pipe_src_h - 1));
+
+ /* on skylake this is done by detaching scalers */
+ if (INTEL_INFO(dev)->gen >= 9) {
+ skl_detach_scalers(crtc);
+
+ if (pipe_config->pch_pfit.enabled)
+ skylake_pfit_enable(crtc);
+ } else if (HAS_PCH_SPLIT(dev)) {
+ if (pipe_config->pch_pfit.enabled)
+ ironlake_pfit_enable(crtc);
+ else if (old_crtc_state->pch_pfit.enabled)
+ ironlake_pfit_disable(crtc, true);
}
- crtc->config->pipe_src_w = adjusted_mode->crtc_hdisplay;
- crtc->config->pipe_src_h = adjusted_mode->crtc_vdisplay;
}
static void intel_fdi_normal_train(struct drm_crtc *crtc)
intel_ddi_enable_pipe_clock(intel_crtc);
- if (INTEL_INFO(dev)->gen == 9)
+ if (INTEL_INFO(dev)->gen >= 9)
skylake_pfit_enable(intel_crtc);
- else if (INTEL_INFO(dev)->gen < 9)
- ironlake_pfit_enable(intel_crtc);
else
- MISSING_CASE(INTEL_INFO(dev)->gen);
+ ironlake_pfit_enable(intel_crtc);
/*
* On ILK+ LUT must be loaded before the pipe is running but with
}
}
-static void ironlake_pfit_disable(struct intel_crtc *crtc)
+static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
/* To avoid upsetting the power well on haswell only disable the pfit if
* it's in use. The hw state code will make sure we get this right. */
- if (crtc->config->pch_pfit.enabled) {
+ if (force || crtc->config->pch_pfit.enabled) {
I915_WRITE(PF_CTL(pipe), 0);
I915_WRITE(PF_WIN_POS(pipe), 0);
I915_WRITE(PF_WIN_SZ(pipe), 0);
intel_disable_pipe(intel_crtc);
- ironlake_pfit_disable(intel_crtc);
+ ironlake_pfit_disable(intel_crtc, false);
if (intel_crtc->config->has_pch_encoder)
ironlake_fdi_disable(crtc);
intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
- if (INTEL_INFO(dev)->gen == 9)
+ if (INTEL_INFO(dev)->gen >= 9)
skylake_scaler_disable(intel_crtc);
- else if (INTEL_INFO(dev)->gen < 9)
- ironlake_pfit_disable(intel_crtc);
else
- MISSING_CASE(INTEL_INFO(dev)->gen);
+ ironlake_pfit_disable(intel_crtc, false);
intel_ddi_disable_pipe_clock(intel_crtc);
modeset_put_power_domains(dev_priv, put_domains[i]);
}
+static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
+{
+ int max_cdclk_freq = dev_priv->max_cdclk_freq;
+
+ if (INTEL_INFO(dev_priv)->gen >= 9 ||
+ IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+ return max_cdclk_freq;
+ else if (IS_CHERRYVIEW(dev_priv))
+ return max_cdclk_freq*95/100;
+ else if (INTEL_INFO(dev_priv)->gen < 4)
+ return 2*max_cdclk_freq*90/100;
+ else
+ return max_cdclk_freq*90/100;
+}
+
static void intel_update_max_cdclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
}
+ dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
+
DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
dev_priv->max_cdclk_freq);
+
+ DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
+ dev_priv->max_dotclk_freq);
}
static void intel_update_cdclk(struct drm_device *dev)
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
- if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
- chv_prepare_pll(intel_crtc, intel_crtc->config);
- else
- vlv_prepare_pll(intel_crtc, intel_crtc->config);
- }
-
if (intel_crtc->config->has_dp_encoder)
intel_dp_set_m_n(intel_crtc, M1_N1);
encoder->pre_pll_enable(encoder);
if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
+ if (IS_CHERRYVIEW(dev)) {
+ chv_prepare_pll(intel_crtc, intel_crtc->config);
chv_enable_pll(intel_crtc, intel_crtc->config);
- else
+ } else {
+ vlv_prepare_pll(intel_crtc, intel_crtc->config);
vlv_enable_pll(intel_crtc, intel_crtc->config);
+ }
}
for_each_encoder_on_crtc(dev, crtc, encoder)
i9xx_disable_pll(intel_crtc);
}
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->post_pll_disable)
+ encoder->post_pll_disable(encoder);
+
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
1 << DPIO_CHV_N_DIV_SHIFT);
/* M2 fraction division */
- if (bestm2_frac)
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
/* M2 fraction division enable */
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
else
i9xx_crtc_clock_get(crtc, pipe_config);
+ /*
+ * Normally the dotclock is filled in by the encoder .get_config()
+ * but in case the pipe is enabled w/o any ports we need a sane
+ * default.
+ */
+ pipe_config->base.adjusted_mode.crtc_clock =
+ pipe_config->port_clock / pipe_config->pixel_multiplier;
+
return true;
}
if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
with_spread = true;
- if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
- with_fdi, "LP PCH doesn't have FDI\n"))
+ if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
with_fdi = false;
mutex_lock(&dev_priv->sb_lock);
}
}
- reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
- SBI_GEN0 : SBI_DBUFF0;
+ reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
mutex_lock(&dev_priv->sb_lock);
- reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
- SBI_GEN0 : SBI_DBUFF0;
+ reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
DRM_DEBUG_KMS("Enabling package C8+\n");
- if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ if (HAS_PCH_LPT_LP(dev)) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
hsw_restore_lcpll(dev_priv);
lpt_init_pch_refclk(dev);
- if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ if (HAS_PCH_LPT_LP(dev)) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val |= PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
}
if (intel_display_power_is_enabled(dev_priv, pfit_domain)) {
- if (INTEL_INFO(dev)->gen == 9)
+ if (INTEL_INFO(dev)->gen >= 9)
skylake_get_pfit_config(crtc, pipe_config);
- else if (INTEL_INFO(dev)->gen < 9)
- ironlake_get_pfit_config(crtc, pipe_config);
else
- MISSING_CASE(INTEL_INFO(dev)->gen);
+ ironlake_get_pfit_config(crtc, pipe_config);
}
if (IS_HASWELL(dev))
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int x = crtc->cursor_x;
- int y = crtc->cursor_y;
+ struct drm_plane_state *cursor_state = crtc->cursor->state;
+ int x = cursor_state->crtc_x;
+ int y = cursor_state->crtc_y;
u32 base = 0, pos = 0;
if (on)
base = 0;
if (x < 0) {
- if (x + intel_crtc->base.cursor->state->crtc_w <= 0)
+ if (x + cursor_state->crtc_w <= 0)
base = 0;
pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
pos |= x << CURSOR_X_SHIFT;
if (y < 0) {
- if (y + intel_crtc->base.cursor->state->crtc_h <= 0)
+ if (y + cursor_state->crtc_h <= 0)
base = 0;
pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
/* ILK+ do this automagically */
if (HAS_GMCH_DISPLAY(dev) &&
crtc->cursor->state->rotation == BIT(DRM_ROTATE_180)) {
- base += (intel_crtc->base.cursor->state->crtc_h *
- intel_crtc->base.cursor->state->crtc_w - 1) * 4;
+ base += (cursor_state->crtc_h *
+ cursor_state->crtc_w - 1) * 4;
}
if (IS_845G(dev) || IS_I865G(dev))
DERRMR_PIPEB_PRI_FLIP_DONE |
DERRMR_PIPEC_PRI_FLIP_DONE));
if (IS_GEN8(dev))
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8 |
MI_SRM_LRM_GLOBAL_GTT);
else
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM |
MI_SRM_LRM_GLOBAL_GTT);
intel_ring_emit(ring, DERRMR);
intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
- u32 start_vbl_count;
intel_mark_page_flip_active(intel_crtc);
- intel_pipe_update_start(intel_crtc, &start_vbl_count);
+ intel_pipe_update_start(intel_crtc);
if (INTEL_INFO(dev)->gen >= 9)
skl_do_mmio_flip(intel_crtc);
/* use_mmio_flip() retricts MMIO flips to ilk+ */
ilk_do_mmio_flip(intel_crtc);
- intel_pipe_update_end(intel_crtc, start_vbl_count);
+ intel_pipe_update_end(intel_crtc);
}
static void intel_mmio_flip_work_func(struct work_struct *work)
if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
return true;
+ if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
+ return false;
+
if (!work->enable_stall_check)
return false;
if (ret)
goto cleanup_pending;
- work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary), obj)
- + intel_crtc->dspaddr_offset;
+ work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
+ obj, 0);
+ work->gtt_offset += intel_crtc->dspaddr_offset;
if (mmio_flip) {
ret = intel_queue_mmio_flip(dev, crtc, fb, obj, ring,
intel_crtc->atomic.update_wm_pre = true;
}
- if (visible)
+ if (visible || was_visible)
intel_crtc->atomic.fb_bits |=
to_intel_plane(plane)->frontbuffer_bit;
pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
pipe_config->fdi_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
pipe_config->dp_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m2_n2.gmch_m,
pipe_config->dp_m2_n2.gmch_n,
pipe_config->dp_m2_n2.link_m,
(DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
- /* Compute a starting value for pipe_config->pipe_bpp taking the source
- * plane pixel format and any sink constraints into account. Returns the
- * source plane bpp so that dithering can be selected on mismatches
- * after encoders and crtc also have had their say. */
base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
pipe_config);
if (base_bpp < 0)
/* Dithering seems to not pass-through bits correctly when it should, so
* only enable it on 6bpc panels. */
pipe_config->dither = pipe_config->pipe_bpp == 6*3;
- DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
+ DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
fail:
base.head) \
if (mask & (1 <<(intel_crtc)->pipe))
-
static bool
intel_compare_m_n(unsigned int m, unsigned int n,
unsigned int m2, unsigned int n2,
PIPE_CONF_CHECK_M_N(fdi_m_n);
PIPE_CONF_CHECK_I(has_dp_encoder);
+ PIPE_CONF_CHECK_I(lane_count);
if (INTEL_INFO(dev)->gen < 8) {
PIPE_CONF_CHECK_M_N(dp_m_n);
DRM_MODE_FLAG_NVSYNC);
}
- PIPE_CONF_CHECK_I(pipe_src_w);
- PIPE_CONF_CHECK_I(pipe_src_h);
-
- PIPE_CONF_CHECK_I(gmch_pfit.control);
+ PIPE_CONF_CHECK_X(gmch_pfit.control);
/* pfit ratios are autocomputed by the hw on gen4+ */
if (INTEL_INFO(dev)->gen < 4)
PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
- PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+ PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
- PIPE_CONF_CHECK_I(pch_pfit.enabled);
- if (current_config->pch_pfit.enabled) {
- PIPE_CONF_CHECK_I(pch_pfit.pos);
- PIPE_CONF_CHECK_I(pch_pfit.size);
- }
+ if (!adjust) {
+ PIPE_CONF_CHECK_I(pipe_src_w);
+ PIPE_CONF_CHECK_I(pipe_src_h);
+
+ PIPE_CONF_CHECK_I(pch_pfit.enabled);
+ if (current_config->pch_pfit.enabled) {
+ PIPE_CONF_CHECK_X(pch_pfit.pos);
+ PIPE_CONF_CHECK_X(pch_pfit.size);
+ }
- PIPE_CONF_CHECK_I(scaler_state.scaler_id);
+ PIPE_CONF_CHECK_I(scaler_state.scaler_id);
+ }
/* BDW+ don't expose a synchronous way to read the state */
if (IS_HASWELL(dev))
struct intel_crtc_state *pipe_config, *sw_config;
bool active;
- if (!needs_modeset(crtc->state))
+ if (!needs_modeset(crtc->state) &&
+ !to_intel_crtc_state(crtc->state)->update_pipe)
continue;
__drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
return ret;
}
-
static int intel_modeset_checks(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
if (ret)
return ret;
- if (i915.fastboot &&
- intel_pipe_config_compare(state->dev,
+ if (intel_pipe_config_compare(state->dev,
to_intel_crtc_state(crtc->state),
pipe_config, true)) {
crtc_state->mode_changed = false;
+ to_intel_crtc_state(crtc_state)->update_pipe = true;
}
if (needs_modeset(crtc_state)) {
for_each_crtc_in_state(state, crtc, crtc_state, i) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
bool modeset = needs_modeset(crtc->state);
+ bool update_pipe = !modeset &&
+ to_intel_crtc_state(crtc->state)->update_pipe;
+ unsigned long put_domains = 0;
if (modeset && crtc->state->active) {
update_scanline_offset(to_intel_crtc(crtc));
dev_priv->display.crtc_enable(crtc);
}
+ if (update_pipe) {
+ put_domains = modeset_get_crtc_power_domains(crtc);
+
+ /* make sure intel_modeset_check_state runs */
+ any_ms = true;
+ }
+
if (!modeset)
intel_pre_plane_update(intel_crtc);
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+
+ if (put_domains)
+ modeset_put_power_domains(dev_priv, put_domains);
+
intel_post_plane_update(intel_crtc);
}
if (!crtc->state->active)
return;
- if (state->visible)
- /* FIXME: kill this fastboot hack */
- intel_update_pipe_size(intel_crtc);
-
- dev_priv->display.update_primary_plane(crtc, fb, crtc->x, crtc->y);
+ dev_priv->display.update_primary_plane(crtc, fb,
+ state->src.x1 >> 16,
+ state->src.y1 >> 16);
}
static void
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *old_intel_state =
+ to_intel_crtc_state(old_crtc_state);
+ bool modeset = needs_modeset(crtc->state);
if (intel_crtc->atomic.update_wm_pre)
intel_update_watermarks(crtc);
/* Perform vblank evasion around commit operation */
if (crtc->state->active)
- intel_pipe_update_start(intel_crtc, &intel_crtc->start_vbl_count);
+ intel_pipe_update_start(intel_crtc);
+
+ if (modeset)
+ return;
- if (!needs_modeset(crtc->state) && INTEL_INFO(dev)->gen >= 9)
+ if (to_intel_crtc_state(crtc->state)->update_pipe)
+ intel_update_pipe_config(intel_crtc, old_intel_state);
+ else if (INTEL_INFO(dev)->gen >= 9)
skl_detach_scalers(intel_crtc);
}
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
if (crtc->state->active)
- intel_pipe_update_end(intel_crtc, intel_crtc->start_vbl_count);
+ intel_pipe_update_end(intel_crtc);
}
/**
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
- plane->fb = state->base.fb;
- crtc->cursor_x = state->base.crtc_x;
- crtc->cursor_y = state->base.crtc_y;
-
if (intel_crtc->cursor_bo == obj)
goto update;
}
}
- intel_init_dpio(dev);
-
intel_shared_dpll_init(dev);
/* Just disable it once at startup */
return true;
}
+static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct intel_encoder *encoder;
+
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ return true;
+
+ return false;
+}
+
static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
u32 reg;
- bool enable;
/* Clear any frame start delays used for debugging left by the BIOS */
reg = PIPECONF(crtc->config->cpu_transcoder);
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
- drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
- update_scanline_offset(crtc);
+ struct intel_plane *plane;
+
drm_crtc_vblank_on(&crtc->base);
+
+ /* Disable everything but the primary plane */
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane->disable_plane(&plane->base, &crtc->base);
+ }
}
/* We need to sanitize the plane -> pipe mapping first because this will
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
- enable = false;
- for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
- enable = true;
- break;
- }
-
- if (!enable)
+ if (!intel_crtc_has_encoders(crtc))
intel_crtc_disable_noatomic(&crtc->base);
if (crtc->active != crtc->base.state->active) {
+ struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
* functions or because of calls to intel_crtc_disable_noatomic,
i915_redisable_vga_power_on(dev);
}
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+ return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
}
-static void readout_plane_state(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
{
- struct intel_plane *p;
- struct intel_plane_state *plane_state;
- bool active = crtc_state->base.active;
-
- for_each_intel_plane(crtc->base.dev, p) {
- if (crtc->pipe != p->pipe)
- continue;
-
- plane_state = to_intel_plane_state(p->base.state);
-
- if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
- plane_state->visible = primary_get_hw_state(crtc);
- if (plane_state->visible)
- crtc->base.state->plane_mask |=
- 1 << drm_plane_index(&p->base);
- } else {
- if (active)
- p->disable_plane(&p->base, &crtc->base);
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(crtc->base.primary->state);
- plane_state->visible = false;
- }
- }
+ plane_state->visible =
+ primary_get_hw_state(to_intel_plane(crtc->base.primary));
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
- if (crtc->base.state->active) {
- intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
- intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
- WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
- /*
- * The initial mode needs to be set in order to keep
- * the atomic core happy. It wants a valid mode if the
- * crtc's enabled, so we do the above call.
- *
- * At this point some state updated by the connectors
- * in their ->detect() callback has not run yet, so
- * no recalculation can be done yet.
- *
- * Even if we could do a recalculation and modeset
- * right now it would cause a double modeset if
- * fbdev or userspace chooses a different initial mode.
- *
- * If that happens, someone indicated they wanted a
- * mode change, which means it's safe to do a full
- * recalculation.
- */
- crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
- }
-
- crtc->base.hwmode = crtc->config->base.adjusted_mode;
- readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
+ readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_crtc(dev, crtc) {
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+
+ drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
+ update_scanline_offset(crtc);
+ }
+ }
}
/* Scan out the current hw modeset state,
projects / linux-2.6-block.git / blobdiff