/*****************************************************************************/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/device.h>
#include <linux/delay.h>
* Define the driver info for a user level control device. Used mainly
* to get at port stats - only not using the port device itself.
*/
-static struct file_operations stl_fsiomem = {
+static const struct file_operations stl_fsiomem = {
.owner = THIS_MODULE,
.ioctl = stl_memioctl,
};
"errno=%d\n", -i);
return;
}
- for (i = 0; i < 4; i++) {
- devfs_remove("staliomem/%d", i);
+ for (i = 0; i < 4; i++)
class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- }
- devfs_remove("staliomem");
if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
printk("STALLION: failed to un-register serial memory device, "
"errno=%d\n", -i);
* calls off to the approrpriate board interrupt handlers.
*/
-static irqreturn_t stl_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t stl_intr(int irq, void *dev_id)
{
stlbrd_t *brdp = (stlbrd_t *) dev_id;
#ifdef DEBUG
- printk("stl_intr(brdp=%x,irq=%d,regs=%x)\n", (int) brdp, irq,
- (int) regs);
+ printk("stl_intr(brdp=%x,irq=%d)\n", (int) brdp, irq);
#endif
return IRQ_RETVAL((* brdp->isr)(brdp));
brdp->nrpanels = 1;
brdp->state |= BRD_FOUND;
brdp->hwid = status;
- if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+ if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
rc = -ENODEV;
outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
brdp->state |= BRD_FOUND;
- if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+ if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
i = -ENODEV;
return(rc);
}
-static struct tty_operations stl_ops = {
+static const struct tty_operations stl_ops = {
.open = stl_open,
.close = stl_close,
.write = stl_write,
*/
if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
printk("STALLION: failed to register serial board device\n");
- devfs_mk_dir("staliomem");
stallion_class = class_create(THIS_MODULE, "staliomem");
- for (i = 0; i < 4; i++) {
- devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
- S_IFCHR|S_IRUSR|S_IWUSR,
- "staliomem/%d", i);
+ for (i = 0; i < 4; i++)
class_device_create(stallion_class, NULL,
MKDEV(STL_SIOMEMMAJOR, i), NULL,
"staliomem%d", i);
- }
stl_serial->owner = THIS_MODULE;
stl_serial->driver_name = stl_drvname;
stl_serial->name = "ttyE";
- stl_serial->devfs_name = "tts/E";
stl_serial->major = STL_SERIALMAJOR;
stl_serial->minor_start = 0;
stl_serial->type = TTY_DRIVER_TYPE_SERIAL;