#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
+#include <linux/firmware.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/poll.h>
#include <linux/slab.h>
-#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/signal.h>
#include <linux/ioctl.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
#include <linux/skbuff.h>
+#include <linux/ti_wilink_st.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+#include <linux/gpio/consumer.h>
#include "hci_uart.h"
u8 cmd;
} __packed;
+struct ll_device {
+ struct hci_uart hu;
+ struct serdev_device *serdev;
+ struct gpio_desc *enable_gpio;
+};
+
struct ll_struct {
unsigned long rx_state;
unsigned long rx_count;
hu->priv = ll;
+ if (hu->serdev)
+ serdev_device_open(hu->serdev);
+
return 0;
}
kfree_skb(ll->rx_skb);
+ if (hu->serdev) {
+ struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
+ gpiod_set_value_cansleep(lldev->enable_gpio, 0);
+
+ serdev_device_close(hu->serdev);
+ }
+
hu->priv = NULL;
kfree(ll);
return skb_dequeue(&ll->txq);
}
+#if IS_ENABLED(CONFIG_SERIAL_DEV_BUS)
+static int read_local_version(struct hci_dev *hdev)
+{
+ int err = 0;
+ unsigned short version = 0;
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading TI version information failed (%ld)",
+ PTR_ERR(skb));
+ err = PTR_ERR(skb);
+ goto out;
+ }
+ if (skb->len != sizeof(*ver)) {
+ err = -EILSEQ;
+ goto out;
+ }
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ if (le16_to_cpu(ver->manufacturer) != 13) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ version = le16_to_cpu(ver->lmp_subver);
+
+out:
+ if (err) bt_dev_err(hdev, "Failed to read TI version info: %d", err);
+ kfree_skb(skb);
+ return err ? err : version;
+}
+
+/**
+ * download_firmware -
+ * internal function which parses through the .bts firmware
+ * script file intreprets SEND, DELAY actions only as of now
+ */
+static int download_firmware(struct ll_device *lldev)
+{
+ unsigned short chip, min_ver, maj_ver;
+ int version, err, len;
+ unsigned char *ptr, *action_ptr;
+ unsigned char bts_scr_name[40]; /* 40 char long bts scr name? */
+ const struct firmware *fw;
+ struct sk_buff *skb;
+ struct hci_command *cmd;
+
+ version = read_local_version(lldev->hu.hdev);
+ if (version < 0)
+ return version;
+
+ chip = (version & 0x7C00) >> 10;
+ min_ver = (version & 0x007F);
+ maj_ver = (version & 0x0380) >> 7;
+ if (version & 0x8000)
+ maj_ver |= 0x0008;
+
+ snprintf(bts_scr_name, sizeof(bts_scr_name),
+ "ti-connectivity/TIInit_%d.%d.%d.bts",
+ chip, maj_ver, min_ver);
+
+ err = request_firmware(&fw, bts_scr_name, &lldev->serdev->dev);
+ if (err || !fw->data || !fw->size) {
+ bt_dev_err(lldev->hu.hdev, "request_firmware failed(errno %d) for %s",
+ err, bts_scr_name);
+ return -EINVAL;
+ }
+ ptr = (void *)fw->data;
+ len = fw->size;
+ /* bts_header to remove out magic number and
+ * version
+ */
+ ptr += sizeof(struct bts_header);
+ len -= sizeof(struct bts_header);
+
+ while (len > 0 && ptr) {
+ bt_dev_dbg(lldev->hu.hdev, " action size %d, type %d ",
+ ((struct bts_action *)ptr)->size,
+ ((struct bts_action *)ptr)->type);
+
+ action_ptr = &(((struct bts_action *)ptr)->data[0]);
+
+ switch (((struct bts_action *)ptr)->type) {
+ case ACTION_SEND_COMMAND: /* action send */
+ bt_dev_dbg(lldev->hu.hdev, "S");
+ cmd = (struct hci_command *)action_ptr;
+ if (cmd->opcode == 0xff36) {
+ /* ignore remote change
+ * baud rate HCI VS command */
+ bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
+ break;
+ }
+ if (cmd->prefix != 1)
+ bt_dev_dbg(lldev->hu.hdev, "command type %d\n", cmd->prefix);
+
+ skb = __hci_cmd_sync(lldev->hu.hdev, cmd->opcode, cmd->plen, &cmd->speed, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(lldev->hu.hdev, "send command failed\n");
+ goto out_rel_fw;
+ }
+ kfree_skb(skb);
+ break;
+ case ACTION_WAIT_EVENT: /* wait */
+ /* no need to wait as command was synchronous */
+ bt_dev_dbg(lldev->hu.hdev, "W");
+ break;
+ case ACTION_DELAY: /* sleep */
+ bt_dev_info(lldev->hu.hdev, "sleep command in scr");
+ mdelay(((struct bts_action_delay *)action_ptr)->msec);
+ break;
+ }
+ len -= (sizeof(struct bts_action) +
+ ((struct bts_action *)ptr)->size);
+ ptr += sizeof(struct bts_action) +
+ ((struct bts_action *)ptr)->size;
+ }
+
+out_rel_fw:
+ /* fw download complete */
+ release_firmware(fw);
+ return err;
+}
+
+static int ll_setup(struct hci_uart *hu)
+{
+ int err, retry = 3;
+ struct ll_device *lldev;
+ struct serdev_device *serdev = hu->serdev;
+ u32 speed;
+
+ if (!serdev)
+ return 0;
+
+ lldev = serdev_device_get_drvdata(serdev);
+
+ serdev_device_set_flow_control(serdev, true);
+
+ do {
+ /* Configure BT_EN to HIGH state */
+ gpiod_set_value_cansleep(lldev->enable_gpio, 0);
+ msleep(5);
+ gpiod_set_value_cansleep(lldev->enable_gpio, 1);
+ msleep(100);
+
+ err = download_firmware(lldev);
+ if (!err)
+ break;
+
+ /* Toggle BT_EN and retry */
+ bt_dev_err(hu->hdev, "download firmware failed, retrying...");
+ } while (retry--);
+
+ if (err)
+ return err;
+
+ /* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (speed) {
+ struct sk_buff *skb = __hci_cmd_sync(hu->hdev, 0xff36, sizeof(speed), &speed, HCI_INIT_TIMEOUT);
+ if (!IS_ERR(skb)) {
+ kfree_skb(skb);
+ serdev_device_set_baudrate(serdev, speed);
+ }
+ }
+
+ return 0;
+}
+
+static const struct hci_uart_proto llp;
+
+static int hci_ti_probe(struct serdev_device *serdev)
+{
+ struct hci_uart *hu;
+ struct ll_device *lldev;
+ u32 max_speed = 3000000;
+
+ lldev = devm_kzalloc(&serdev->dev, sizeof(struct ll_device), GFP_KERNEL);
+ if (!lldev)
+ return -ENOMEM;
+ hu = &lldev->hu;
+
+ serdev_device_set_drvdata(serdev, lldev);
+ lldev->serdev = hu->serdev = serdev;
+
+ lldev->enable_gpio = devm_gpiod_get_optional(&serdev->dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(lldev->enable_gpio))
+ return PTR_ERR(lldev->enable_gpio);
+
+ of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed);
+ hci_uart_set_speeds(hu, 115200, max_speed);
+
+ return hci_uart_register_device(hu, &llp);
+}
+
+static void hci_ti_remove(struct serdev_device *serdev)
+{
+ struct ll_device *lldev = serdev_device_get_drvdata(serdev);
+ struct hci_uart *hu = &lldev->hu;
+ struct hci_dev *hdev = hu->hdev;
+
+ cancel_work_sync(&hu->write_work);
+
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ hu->proto->close(hu);
+}
+
+static const struct of_device_id hci_ti_of_match[] = {
+ { .compatible = "ti,wl1831-st" },
+ { .compatible = "ti,wl1835-st" },
+ { .compatible = "ti,wl1837-st" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hci_ti_of_match);
+
+static struct serdev_device_driver hci_ti_drv = {
+ .driver = {
+ .name = "hci-ti",
+ .of_match_table = of_match_ptr(hci_ti_of_match),
+ },
+ .probe = hci_ti_probe,
+ .remove = hci_ti_remove,
+};
+#else
+#define ll_setup NULL
+#endif
+
static const struct hci_uart_proto llp = {
.id = HCI_UART_LL,
.name = "LL",
+ .setup = ll_setup,
.open = ll_open,
.close = ll_close,
.recv = ll_recv,
int __init ll_init(void)
{
+ serdev_device_driver_register(&hci_ti_drv);
+
return hci_uart_register_proto(&llp);
}
int __exit ll_deinit(void)
{
+ serdev_device_driver_unregister(&hci_ti_drv);
+
return hci_uart_unregister_proto(&llp);
}
projects / linux-block.git / blobdiff