#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/sched.h> /* need_resched() */
-#include <linux/latency.h>
+#include <linux/pm_qos_params.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
+#ifdef CONFIG_CPU_IDLE
module_param(max_cstate, uint, 0000);
+#else
+module_param(max_cstate, uint, 0644);
+#endif
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
static int acpi_processor_set_power_policy(struct acpi_processor *pr);
+#else /* CONFIG_CPU_IDLE */
+static unsigned int latency_factor __read_mostly = 2;
+module_param(latency_factor, uint, 0644);
#endif
/*
return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
}
+/*
+ * Callers should disable interrupts before the call and enable
+ * interrupts after return.
+ */
static void acpi_safe_halt(void)
{
current_thread_info()->status &= ~TS_POLLING;
/* Common C-state entry for C2, C3, .. */
static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
{
- if (cstate->space_id == ACPI_CSTATE_FFH) {
+ if (cstate->entry_method == ACPI_CSTATE_FFH) {
/* Call into architectural FFH based C-state */
acpi_processor_ffh_cstate_enter(cstate);
} else {
return 0;
}
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+static int tsc_halts_in_c(int state)
+{
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ /*
+ * AMD Fam10h TSC will tick in all
+ * C/P/S0/S1 states when this bit is set.
+ */
+ if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ return 0;
+ /*FALL THROUGH*/
+ case X86_VENDOR_INTEL:
+ /* Several cases known where TSC halts in C2 too */
+ default:
+ return state > ACPI_STATE_C1;
+ }
+}
+#endif
+
#ifndef CONFIG_CPU_IDLE
static void acpi_processor_idle(void)
{
pm_idle_save();
else
acpi_safe_halt();
+
+ local_irq_enable();
return;
}
* skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
+ local_irq_enable();
break;
case ACPI_STATE_C2:
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC halts in C2, so notify users */
- mark_tsc_unstable("possible TSC halt in C2");
+ if (tsc_halts_in_c(ACPI_STATE_C2))
+ mark_tsc_unstable("possible TSC halt in C2");
#endif
/* Compute time (ticks) that we were actually asleep */
sleep_ticks = ticks_elapsed(t1, t2);
break;
case ACPI_STATE_C3:
+ acpi_unlazy_tlb(smp_processor_id());
/*
* Must be done before busmaster disable as we might
* need to access HPET !
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC halts in C3, so notify users */
- mark_tsc_unstable("TSC halts in C3");
+ if (tsc_halts_in_c(ACPI_STATE_C3))
+ mark_tsc_unstable("TSC halts in C3");
#endif
/* Compute time (ticks) that we were actually asleep */
sleep_ticks = ticks_elapsed(t1, t2);
if (cx->promotion.state &&
((cx->promotion.state - pr->power.states) <= max_cstate)) {
if (sleep_ticks > cx->promotion.threshold.ticks &&
- cx->promotion.state->latency <= system_latency_constraint()) {
+ cx->promotion.state->latency <=
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
cx->promotion.count++;
cx->demotion.count = 0;
if (cx->promotion.count >=
* or if the latency of the current state is unacceptable
*/
if ((pr->power.state - pr->power.states) > max_cstate ||
- pr->power.state->latency > system_latency_constraint()) {
+ pr->power.state->latency >
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
if (cx->demotion.state)
next_state = cx->demotion.state;
}
cx.address = reg->address;
cx.index = current_count + 1;
- cx.space_id = ACPI_CSTATE_SYSTEMIO;
+ cx.entry_method = ACPI_CSTATE_SYSTEMIO;
if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
if (acpi_processor_ffh_cstate_probe
(pr->id, &cx, reg) == 0) {
- cx.space_id = ACPI_CSTATE_FFH;
- } else if (cx.type != ACPI_STATE_C1) {
+ cx.entry_method = ACPI_CSTATE_FFH;
+ } else if (cx.type == ACPI_STATE_C1) {
/*
* C1 is a special case where FIXED_HARDWARE
* can be handled in non-MWAIT way as well.
* In that case, save this _CST entry info.
- * That is, we retain space_id of SYSTEM_IO for
- * halt based C1.
* Otherwise, ignore this info and continue.
*/
+ cx.entry_method = ACPI_CSTATE_HALT;
+ } else {
continue;
}
}
"maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
max_cstate, (unsigned)pr->power.bm_activity,
- system_latency_constraint());
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
/**
* acpi_idle_do_entry - a helper function that does C2 and C3 type entry
* @cx: cstate data
+ *
+ * Caller disables interrupt before call and enables interrupt after return.
*/
static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
{
- if (cx->space_id == ACPI_CSTATE_FFH) {
+ if (cx->entry_method == ACPI_CSTATE_FFH) {
/* Call into architectural FFH based C-state */
acpi_processor_ffh_cstate_enter(cx);
+ } else if (cx->entry_method == ACPI_CSTATE_HALT) {
+ acpi_safe_halt();
} else {
int unused;
/* IO port based C-state */
static int acpi_idle_enter_c1(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
+ u32 t1, t2;
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+
pr = processors[smp_processor_id()];
if (unlikely(!pr))
return 0;
+ local_irq_disable();
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
- acpi_safe_halt();
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ acpi_idle_do_entry(cx);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ local_irq_enable();
cx->usage++;
- return 0;
+ return ticks_elapsed_in_us(t1, t2);
}
/**
return 0;
}
+ acpi_unlazy_tlb(smp_processor_id());
/*
* Must be done before busmaster disable as we might need to
* access HPET !
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC could halt in idle, so notify users */
- mark_tsc_unstable("TSC halts in idle");;
+ if (tsc_halts_in_c(cx->type))
+ mark_tsc_unstable("TSC halts in idle");;
#endif
sleep_ticks = ticks_elapsed(t1, t2);
if (dev->safe_state) {
return dev->safe_state->enter(dev, dev->safe_state);
} else {
+ local_irq_disable();
acpi_safe_halt();
+ local_irq_enable();
return 0;
}
}
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC could halt in idle, so notify users */
- mark_tsc_unstable("TSC halts in idle");
+ if (tsc_halts_in_c(ACPI_STATE_C3))
+ mark_tsc_unstable("TSC halts in idle");
#endif
sleep_ticks = ticks_elapsed(t1, t2);
/* Tell the scheduler how much we idled: */
*/
static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
{
- int i, count = 0;
+ int i, count = CPUIDLE_DRIVER_STATE_START;
struct acpi_processor_cx *cx;
struct cpuidle_state *state;
struct cpuidle_device *dev = &pr->power.dev;
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
state->exit_latency = cx->latency;
- state->target_residency = cx->latency * 6;
+ state->target_residency = cx->latency * latency_factor;
state->power_usage = cx->power;
state->flags = 0;
switch (cx->type) {
case ACPI_STATE_C1:
state->flags |= CPUIDLE_FLAG_SHALLOW;
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_c1;
dev->safe_state = state;
break;
}
count++;
+ if (count == CPUIDLE_STATE_MAX)
+ break;
}
dev->state_count = count;
"ACPI: processor limited to max C-state %d\n",
max_cstate);
first_run++;
-#if !defined (CONFIG_CPU_IDLE) && defined (CONFIG_SMP)
- register_latency_notifier(&acpi_processor_latency_notifier);
+#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP)
+ pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY,
+ &acpi_processor_latency_notifier);
#endif
}
*/
cpu_idle_wait();
#ifdef CONFIG_SMP
- unregister_latency_notifier(&acpi_processor_latency_notifier);
+ pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY,
+ &acpi_processor_latency_notifier);
#endif
}
#endif
projects / linux-2.6-block.git / blobdiff